Staging: rtl8187se: fix \r\n line ends

Andrew pointed out that I forgot to convert some files to unix format
when adding them originally.  This patch runs dos2unix on the rtl8187se
files that needed them.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

5 files changed, 2215 insertions, 2215 deletions

diff --git a/drivers/staging/rtl8187se/dot11d.h b/drivers/staging/rtl8187se/dot11d.h
index 49f53fe52af..2417da99529 100644
--- a/drivers/staging/rtl8187se/dot11d.h
+++ b/drivers/staging/rtl8187se/dot11d.h
@@ -1,101 +1,101 @@
-#ifndef __INC_DOT11D_H

-#define __INC_DOT11D_H

-

-#include "ieee80211.h"

-

-//#define ENABLE_DOT11D

-

-//#define DOT11D_MAX_CHNL_NUM 83

-

-typedef struct _CHNL_TXPOWER_TRIPLE {

-	u8 FirstChnl;

-	u8  NumChnls;

-	u8  MaxTxPowerInDbm;

-}CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE;

-

-typedef enum _DOT11D_STATE {

-	DOT11D_STATE_NONE = 0,

-	DOT11D_STATE_LEARNED,

-	DOT11D_STATE_DONE,

-}DOT11D_STATE;

-

-typedef struct _RT_DOT11D_INFO {

-	//DECLARE_RT_OBJECT(RT_DOT11D_INFO);

-

-	bool bEnabled; // dot11MultiDomainCapabilityEnabled

-

-	u16 CountryIeLen; // > 0 if CountryIeBuf[] contains valid country information element.

-	u8  CountryIeBuf[MAX_IE_LEN];

-	u8  CountryIeSrcAddr[6]; // Source AP of the country IE.

-	u8  CountryIeWatchdog; 

-

-	u8  channel_map[MAX_CHANNEL_NUMBER+1];  //!!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan)

-	//u8  ChnlListLen; // #Bytes valid in ChnlList[].

-	//u8  ChnlList[DOT11D_MAX_CHNL_NUM];

-	u8  MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1];

-

-	DOT11D_STATE State;

-}RT_DOT11D_INFO, *PRT_DOT11D_INFO;

-#define eqMacAddr(a,b)		( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 )

-#define cpMacAddr(des,src)	      ((des)[0]=(src)[0],(des)[1]=(src)[1],(des)[2]=(src)[2],(des)[3]=(src)[3],(des)[4]=(src)[4],(des)[5]=(src)[5])

-#define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo))

-

-#define IS_DOT11D_ENABLE(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->bEnabled

-#define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0)

-

-#define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa) 

-#define UPDATE_CIE_SRC(__pIeeeDev, __pTa) cpMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)

-

-#define IS_COUNTRY_IE_CHANGED(__pIeeeDev, __Ie) \

-	(((__Ie).Length == 0 || (__Ie).Length != GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen) ? \

-	FALSE : \

-	(!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length)))

-

-#define CIE_WATCHDOG_TH 1

-#define GET_CIE_WATCHDOG(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog

-#define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0 

-#define UPDATE_CIE_WATCHDOG(__pIeeeDev) ++GET_CIE_WATCHDOG(__pIeeeDev)

-

-#define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE)

-

-

-void

-Dot11d_Init(

-	struct ieee80211_device *dev

-	);

-

-void

-Dot11d_Reset(

-	struct ieee80211_device *dev

-	);

-

-void

-Dot11d_UpdateCountryIe(

-	struct ieee80211_device *dev,

-	u8 *		pTaddr,

-	u16	CoutryIeLen,

-	u8 * pCoutryIe	 

-	);

-

-u8

-DOT11D_GetMaxTxPwrInDbm(

-	struct ieee80211_device *dev,

-	u8 Channel

-	);

-

-void

-DOT11D_ScanComplete(

-	struct ieee80211_device * dev

-	);

-

-int IsLegalChannel(

-	struct ieee80211_device * dev,

-	u8 channel

-);

-

-int ToLegalChannel(

-	struct ieee80211_device * dev,

-	u8 channel

-);

-

-#endif // #ifndef __INC_DOT11D_H

+#ifndef __INC_DOT11D_H
+#define __INC_DOT11D_H
+
+#include "ieee80211.h"
+
+//#define ENABLE_DOT11D
+
+//#define DOT11D_MAX_CHNL_NUM 83
+
+typedef struct _CHNL_TXPOWER_TRIPLE {
+	u8 FirstChnl;
+	u8  NumChnls;
+	u8  MaxTxPowerInDbm;
+}CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE;
+
+typedef enum _DOT11D_STATE {
+	DOT11D_STATE_NONE = 0,
+	DOT11D_STATE_LEARNED,
+	DOT11D_STATE_DONE,
+}DOT11D_STATE;
+
+typedef struct _RT_DOT11D_INFO {
+	//DECLARE_RT_OBJECT(RT_DOT11D_INFO);
+
+	bool bEnabled; // dot11MultiDomainCapabilityEnabled
+
+	u16 CountryIeLen; // > 0 if CountryIeBuf[] contains valid country information element.
+	u8  CountryIeBuf[MAX_IE_LEN];
+	u8  CountryIeSrcAddr[6]; // Source AP of the country IE.
+	u8  CountryIeWatchdog;
+
+	u8  channel_map[MAX_CHANNEL_NUMBER+1];  //!!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan)
+	//u8  ChnlListLen; // #Bytes valid in ChnlList[].
+	//u8  ChnlList[DOT11D_MAX_CHNL_NUM];
+	u8  MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1];
+
+	DOT11D_STATE State;
+}RT_DOT11D_INFO, *PRT_DOT11D_INFO;
+#define eqMacAddr(a,b)		( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 )
+#define cpMacAddr(des,src)	      ((des)[0]=(src)[0],(des)[1]=(src)[1],(des)[2]=(src)[2],(des)[3]=(src)[3],(des)[4]=(src)[4],(des)[5]=(src)[5])
+#define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo))
+
+#define IS_DOT11D_ENABLE(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->bEnabled
+#define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0)
+
+#define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
+#define UPDATE_CIE_SRC(__pIeeeDev, __pTa) cpMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
+
+#define IS_COUNTRY_IE_CHANGED(__pIeeeDev, __Ie) \
+	(((__Ie).Length == 0 || (__Ie).Length != GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen) ? \
+	FALSE : \
+	(!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length)))
+
+#define CIE_WATCHDOG_TH 1
+#define GET_CIE_WATCHDOG(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog
+#define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0
+#define UPDATE_CIE_WATCHDOG(__pIeeeDev) ++GET_CIE_WATCHDOG(__pIeeeDev)
+
+#define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE)
+
+
+void
+Dot11d_Init(
+	struct ieee80211_device *dev
+	);
+
+void
+Dot11d_Reset(
+	struct ieee80211_device *dev
+	);
+
+void
+Dot11d_UpdateCountryIe(
+	struct ieee80211_device *dev,
+	u8 *		pTaddr,
+	u16	CoutryIeLen,
+	u8 * pCoutryIe
+	);
+
+u8
+DOT11D_GetMaxTxPwrInDbm(
+	struct ieee80211_device *dev,
+	u8 Channel
+	);
+
+void
+DOT11D_ScanComplete(
+	struct ieee80211_device * dev
+	);
+
+int IsLegalChannel(
+	struct ieee80211_device * dev,
+	u8 channel
+);
+
+int ToLegalChannel(
+	struct ieee80211_device * dev,
+	u8 channel
+);
+
+#endif // #ifndef __INC_DOT11D_H
diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.c b/drivers/staging/rtl8187se/ieee80211/dot11d.c
index 5d8b752fc0f..54bcdcf1d33 100644
--- a/drivers/staging/rtl8187se/ieee80211/dot11d.c
+++ b/drivers/staging/rtl8187se/ieee80211/dot11d.c
@@ -1,246 +1,246 @@
-#ifdef ENABLE_DOT11D

-//-----------------------------------------------------------------------------

-//	File:

-//		Dot11d.c

-//

-//	Description:

-//		Implement 802.11d. 

-//

-//-----------------------------------------------------------------------------

-

-#include "dot11d.h"

-

-void

-Dot11d_Init(struct ieee80211_device *ieee)

-{

-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee);

-

-	pDot11dInfo->bEnabled = 0;

-

-	pDot11dInfo->State = DOT11D_STATE_NONE;

-	pDot11dInfo->CountryIeLen = 0;

-	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);  

-	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);

-	RESET_CIE_WATCHDOG(ieee);

-

-	printk("Dot11d_Init()\n");

-}

-

-//

-//	Description:

-//		Reset to the state as we are just entering a regulatory domain.

-//

-void

-Dot11d_Reset(struct ieee80211_device *ieee)

-{

-	u32 i;

-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee);

-

-	// Clear old channel map

-	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);

-	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);

-	// Set new channel map

-	for (i=1; i<=11; i++) {

-		(pDot11dInfo->channel_map)[i] = 1;

-	}

-	for (i=12; i<=14; i++) {

-		(pDot11dInfo->channel_map)[i] = 2;

-	}

-

-	pDot11dInfo->State = DOT11D_STATE_NONE;

-	pDot11dInfo->CountryIeLen = 0;

-	RESET_CIE_WATCHDOG(ieee);

-

-	//printk("Dot11d_Reset()\n");

-}

-

-//

-//	Description:

-//		Update country IE from Beacon or Probe Resopnse 

-//		and configure PHY for operation in the regulatory domain.

-//

-//	TODO: 

-//		Configure Tx power.

-//

-//	Assumption:

-//		1. IS_DOT11D_ENABLE() is TRUE.

-//		2. Input IE is an valid one.

-//

-void

-Dot11d_UpdateCountryIe(

-	struct ieee80211_device *dev,

-	u8 *		pTaddr,

-	u16	CoutryIeLen,

-	u8 * pCoutryIe	 

-	)

-{

-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);

-	u8 i, j, NumTriples, MaxChnlNum;

-	PCHNL_TXPOWER_TRIPLE pTriple;

-

-	if((CoutryIeLen - 3)%3 != 0)

-	{

-		printk("Dot11d_UpdateCountryIe(): Invalid country IE, skip it........1\n");

-		Dot11d_Reset(dev);

-		return;

-	}

-

-	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);

-	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);

-	MaxChnlNum = 0;

-	NumTriples = (CoutryIeLen - 3) / 3; // skip 3-byte country string.

-	pTriple = (PCHNL_TXPOWER_TRIPLE)(pCoutryIe + 3);

-	for(i = 0; i < NumTriples; i++)

-	{

-		if(MaxChnlNum >= pTriple->FirstChnl)

-		{ // It is not in a monotonically increasing order, so stop processing.

-			printk("Dot11d_UpdateCountryIe(): Invalid country IE, skip it........1\n");

-			Dot11d_Reset(dev);

-			return; 

-		}

-		if(MAX_CHANNEL_NUMBER < (pTriple->FirstChnl + pTriple->NumChnls))

-		{ // It is not a valid set of channel id, so stop processing.

-			printk("Dot11d_UpdateCountryIe(): Invalid country IE, skip it........2\n");

-			Dot11d_Reset(dev);

-			return; 

-		}

-

-		for(j = 0 ; j < pTriple->NumChnls; j++)

-		{

-			pDot11dInfo->channel_map[pTriple->FirstChnl + j] = 1;

-			pDot11dInfo->MaxTxPwrDbmList[pTriple->FirstChnl + j] = pTriple->MaxTxPowerInDbm;

-			MaxChnlNum = pTriple->FirstChnl + j;

-		}	

-

-		pTriple = (PCHNL_TXPOWER_TRIPLE)((u8*)pTriple + 3);

-	}

-#if 1

-	//printk("Dot11d_UpdateCountryIe(): Channel List:\n");

-	printk("Channel List:");

-	for(i=1; i<= MAX_CHANNEL_NUMBER; i++)

-		if(pDot11dInfo->channel_map[i] > 0)

-			printk(" %d", i);

-	printk("\n");

-#endif

-

-	UPDATE_CIE_SRC(dev, pTaddr);

-

-	pDot11dInfo->CountryIeLen = CoutryIeLen;

-	memcpy(pDot11dInfo->CountryIeBuf, pCoutryIe,CoutryIeLen);

-	pDot11dInfo->State = DOT11D_STATE_LEARNED;

-}

-

-void dump_chnl_map(u8 * channel_map)

-{

-	int i;

-	printk("Channel List:");

-	for(i=1; i<= MAX_CHANNEL_NUMBER; i++)

-		if(channel_map[i] > 0)

-			printk(" %d(%d)", i, channel_map[i]);

-	printk("\n");

-}

-

-u8

-DOT11D_GetMaxTxPwrInDbm(

-	struct ieee80211_device *dev,

-	u8 Channel

-	)

-{

-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);

-	u8 MaxTxPwrInDbm = 255;

-

-	if(MAX_CHANNEL_NUMBER < Channel)

-	{ 

-		printk("DOT11D_GetMaxTxPwrInDbm(): Invalid Channel\n");

-		return MaxTxPwrInDbm; 

-	}

-	if(pDot11dInfo->channel_map[Channel])

-	{

-		MaxTxPwrInDbm = pDot11dInfo->MaxTxPwrDbmList[Channel];	

-	}

-

-	return MaxTxPwrInDbm;

-}

-

-

-void

-DOT11D_ScanComplete(

-	struct ieee80211_device * dev

-	)

-{

-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);

-

-	switch(pDot11dInfo->State)

-	{

-	case DOT11D_STATE_LEARNED:

-		pDot11dInfo->State = DOT11D_STATE_DONE;

-		break;

-

-	case DOT11D_STATE_DONE:

-		if( GET_CIE_WATCHDOG(dev) == 0 )

-		{ // Reset country IE if previous one is gone. 

-			Dot11d_Reset(dev); 

-		}

-		break;

-	case DOT11D_STATE_NONE:

-		break;

-	}

-}

-

-int IsLegalChannel(

-	struct ieee80211_device * dev,

-	u8 channel

-)

-{

-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);

-

-	if(MAX_CHANNEL_NUMBER < channel)

-	{ 

-		printk("IsLegalChannel(): Invalid Channel\n");

-		return 0; 

-	}

-	if(pDot11dInfo->channel_map[channel] > 0)

-		return 1;

-	return 0;

-}

-

-int ToLegalChannel(

-	struct ieee80211_device * dev,

-	u8 channel

-)

-{

-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);

-	u8 default_chn = 0;

-	u32 i = 0;

-

-	for (i=1; i<= MAX_CHANNEL_NUMBER; i++)

-	{

-		if(pDot11dInfo->channel_map[i] > 0)

-		{

-			default_chn = i;

-			break;

-		}

-	}

-

-	if(MAX_CHANNEL_NUMBER < channel)

-	{ 

-		printk("IsLegalChannel(): Invalid Channel\n");

-		return default_chn; 

-	}

-	

-	if(pDot11dInfo->channel_map[channel] > 0)

-		return channel;

-	

-	return default_chn;

-}

-

-#if 0

-EXPORT_SYMBOL(Dot11d_Init);

-EXPORT_SYMBOL(Dot11d_Reset);

-EXPORT_SYMBOL(Dot11d_UpdateCountryIe);

-EXPORT_SYMBOL(DOT11D_GetMaxTxPwrInDbm);

-EXPORT_SYMBOL(DOT11D_ScanComplete);

-EXPORT_SYMBOL(IsLegalChannel);

-EXPORT_SYMBOL(ToLegalChannel);

-#endif

-#endif

+#ifdef ENABLE_DOT11D
+//-----------------------------------------------------------------------------
+//	File:
+//		Dot11d.c
+//
+//	Description:
+//		Implement 802.11d.
+//
+//-----------------------------------------------------------------------------
+
+#include "dot11d.h"
+
+void
+Dot11d_Init(struct ieee80211_device *ieee)
+{
+	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee);
+
+	pDot11dInfo->bEnabled = 0;
+
+	pDot11dInfo->State = DOT11D_STATE_NONE;
+	pDot11dInfo->CountryIeLen = 0;
+	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);
+	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);
+	RESET_CIE_WATCHDOG(ieee);
+
+	printk("Dot11d_Init()\n");
+}
+
+//
+//	Description:
+//		Reset to the state as we are just entering a regulatory domain.
+//
+void
+Dot11d_Reset(struct ieee80211_device *ieee)
+{
+	u32 i;
+	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee);
+
+	// Clear old channel map
+	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);
+	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);
+	// Set new channel map
+	for (i=1; i<=11; i++) {
+		(pDot11dInfo->channel_map)[i] = 1;
+	}
+	for (i=12; i<=14; i++) {
+		(pDot11dInfo->channel_map)[i] = 2;
+	}
+
+	pDot11dInfo->State = DOT11D_STATE_NONE;
+	pDot11dInfo->CountryIeLen = 0;
+	RESET_CIE_WATCHDOG(ieee);
+
+	//printk("Dot11d_Reset()\n");
+}
+
+//
+//	Description:
+//		Update country IE from Beacon or Probe Resopnse
+//		and configure PHY for operation in the regulatory domain.
+//
+//	TODO:
+//		Configure Tx power.
+//
+//	Assumption:
+//		1. IS_DOT11D_ENABLE() is TRUE.
+//		2. Input IE is an valid one.
+//
+void
+Dot11d_UpdateCountryIe(
+	struct ieee80211_device *dev,
+	u8 *		pTaddr,
+	u16	CoutryIeLen,
+	u8 * pCoutryIe
+	)
+{
+	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
+	u8 i, j, NumTriples, MaxChnlNum;
+	PCHNL_TXPOWER_TRIPLE pTriple;
+
+	if((CoutryIeLen - 3)%3 != 0)
+	{
+		printk("Dot11d_UpdateCountryIe(): Invalid country IE, skip it........1\n");
+		Dot11d_Reset(dev);
+		return;
+	}
+
+	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);
+	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);
+	MaxChnlNum = 0;
+	NumTriples = (CoutryIeLen - 3) / 3; // skip 3-byte country string.
+	pTriple = (PCHNL_TXPOWER_TRIPLE)(pCoutryIe + 3);
+	for(i = 0; i < NumTriples; i++)
+	{
+		if(MaxChnlNum >= pTriple->FirstChnl)
+		{ // It is not in a monotonically increasing order, so stop processing.
+			printk("Dot11d_UpdateCountryIe(): Invalid country IE, skip it........1\n");
+			Dot11d_Reset(dev);
+			return;
+		}
+		if(MAX_CHANNEL_NUMBER < (pTriple->FirstChnl + pTriple->NumChnls))
+		{ // It is not a valid set of channel id, so stop processing.
+			printk("Dot11d_UpdateCountryIe(): Invalid country IE, skip it........2\n");
+			Dot11d_Reset(dev);
+			return;
+		}
+
+		for(j = 0 ; j < pTriple->NumChnls; j++)
+		{
+			pDot11dInfo->channel_map[pTriple->FirstChnl + j] = 1;
+			pDot11dInfo->MaxTxPwrDbmList[pTriple->FirstChnl + j] = pTriple->MaxTxPowerInDbm;
+			MaxChnlNum = pTriple->FirstChnl + j;
+		}
+
+		pTriple = (PCHNL_TXPOWER_TRIPLE)((u8*)pTriple + 3);
+	}
+#if 1
+	//printk("Dot11d_UpdateCountryIe(): Channel List:\n");
+	printk("Channel List:");
+	for(i=1; i<= MAX_CHANNEL_NUMBER; i++)
+		if(pDot11dInfo->channel_map[i] > 0)
+			printk(" %d", i);
+	printk("\n");
+#endif
+
+	UPDATE_CIE_SRC(dev, pTaddr);
+
+	pDot11dInfo->CountryIeLen = CoutryIeLen;
+	memcpy(pDot11dInfo->CountryIeBuf, pCoutryIe,CoutryIeLen);
+	pDot11dInfo->State = DOT11D_STATE_LEARNED;
+}
+
+void dump_chnl_map(u8 * channel_map)
+{
+	int i;
+	printk("Channel List:");
+	for(i=1; i<= MAX_CHANNEL_NUMBER; i++)
+		if(channel_map[i] > 0)
+			printk(" %d(%d)", i, channel_map[i]);
+	printk("\n");
+}
+
+u8
+DOT11D_GetMaxTxPwrInDbm(
+	struct ieee80211_device *dev,
+	u8 Channel
+	)
+{
+	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
+	u8 MaxTxPwrInDbm = 255;
+
+	if(MAX_CHANNEL_NUMBER < Channel)
+	{
+		printk("DOT11D_GetMaxTxPwrInDbm(): Invalid Channel\n");
+		return MaxTxPwrInDbm;
+	}
+	if(pDot11dInfo->channel_map[Channel])
+	{
+		MaxTxPwrInDbm = pDot11dInfo->MaxTxPwrDbmList[Channel];
+	}
+
+	return MaxTxPwrInDbm;
+}
+
+
+void
+DOT11D_ScanComplete(
+	struct ieee80211_device * dev
+	)
+{
+	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
+
+	switch(pDot11dInfo->State)
+	{
+	case DOT11D_STATE_LEARNED:
+		pDot11dInfo->State = DOT11D_STATE_DONE;
+		break;
+
+	case DOT11D_STATE_DONE:
+		if( GET_CIE_WATCHDOG(dev) == 0 )
+		{ // Reset country IE if previous one is gone.
+			Dot11d_Reset(dev);
+		}
+		break;
+	case DOT11D_STATE_NONE:
+		break;
+	}
+}
+
+int IsLegalChannel(
+	struct ieee80211_device * dev,
+	u8 channel
+)
+{
+	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
+
+	if(MAX_CHANNEL_NUMBER < channel)
+	{
+		printk("IsLegalChannel(): Invalid Channel\n");
+		return 0;
+	}
+	if(pDot11dInfo->channel_map[channel] > 0)
+		return 1;
+	return 0;
+}
+
+int ToLegalChannel(
+	struct ieee80211_device * dev,
+	u8 channel
+)
+{
+	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
+	u8 default_chn = 0;
+	u32 i = 0;
+
+	for (i=1; i<= MAX_CHANNEL_NUMBER; i++)
+	{
+		if(pDot11dInfo->channel_map[i] > 0)
+		{
+			default_chn = i;
+			break;
+		}
+	}
+
+	if(MAX_CHANNEL_NUMBER < channel)
+	{
+		printk("IsLegalChannel(): Invalid Channel\n");
+		return default_chn;
+	}
+
+	if(pDot11dInfo->channel_map[channel] > 0)
+		return channel;
+
+	return default_chn;
+}
+
+#if 0
+EXPORT_SYMBOL(Dot11d_Init);
+EXPORT_SYMBOL(Dot11d_Reset);
+EXPORT_SYMBOL(Dot11d_UpdateCountryIe);
+EXPORT_SYMBOL(DOT11D_GetMaxTxPwrInDbm);
+EXPORT_SYMBOL(DOT11D_ScanComplete);
+EXPORT_SYMBOL(IsLegalChannel);
+EXPORT_SYMBOL(ToLegalChannel);
+#endif
+#endif
diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.h b/drivers/staging/rtl8187se/ieee80211/dot11d.h
index 64bcf15bd21..82576b519cc 100644
--- a/drivers/staging/rtl8187se/ieee80211/dot11d.h
+++ b/drivers/staging/rtl8187se/ieee80211/dot11d.h
@@ -1,102 +1,102 @@
-#ifndef __INC_DOT11D_H

-#define __INC_DOT11D_H

-

-#include "ieee80211.h"

-

-//#define ENABLE_DOT11D

-

-//#define DOT11D_MAX_CHNL_NUM 83

-

-typedef struct _CHNL_TXPOWER_TRIPLE {

-	u8 FirstChnl;

-	u8  NumChnls;

-	u8  MaxTxPowerInDbm;

-}CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE;

-

-typedef enum _DOT11D_STATE {

-	DOT11D_STATE_NONE = 0,

-	DOT11D_STATE_LEARNED,

-	DOT11D_STATE_DONE,

-}DOT11D_STATE;

-

-typedef struct _RT_DOT11D_INFO {

-	//DECLARE_RT_OBJECT(RT_DOT11D_INFO);

-

-	bool bEnabled; // dot11MultiDomainCapabilityEnabled

-

-	u16 CountryIeLen; // > 0 if CountryIeBuf[] contains valid country information element.

-	u8  CountryIeBuf[MAX_IE_LEN];

-	u8  CountryIeSrcAddr[6]; // Source AP of the country IE.

-	u8  CountryIeWatchdog; 

-

-	u8  channel_map[MAX_CHANNEL_NUMBER+1];  //!!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan)

-	//u8  ChnlListLen; // #Bytes valid in ChnlList[].

-	//u8  ChnlList[DOT11D_MAX_CHNL_NUM];

-	u8  MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1];

-

-	DOT11D_STATE State;

-}RT_DOT11D_INFO, *PRT_DOT11D_INFO;

-#define eqMacAddr(a,b)		( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 )

-#define cpMacAddr(des,src)	      ((des)[0]=(src)[0],(des)[1]=(src)[1],(des)[2]=(src)[2],(des)[3]=(src)[3],(des)[4]=(src)[4],(des)[5]=(src)[5])

-#define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo))

-

-#define IS_DOT11D_ENABLE(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->bEnabled

-#define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0)

-

-#define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa) 

-#define UPDATE_CIE_SRC(__pIeeeDev, __pTa) cpMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)

-

-#define IS_COUNTRY_IE_CHANGED(__pIeeeDev, __Ie) \

-	(((__Ie).Length == 0 || (__Ie).Length != GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen) ? \

-	FALSE : \

-	(!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length)))

-

-#define CIE_WATCHDOG_TH 1

-#define GET_CIE_WATCHDOG(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog

-#define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0 

-#define UPDATE_CIE_WATCHDOG(__pIeeeDev) ++GET_CIE_WATCHDOG(__pIeeeDev)

-

-#define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE)

-

-

-void

-Dot11d_Init(

-	struct ieee80211_device *dev

-	);

-

-void

-Dot11d_Reset(

-	struct ieee80211_device *dev

-	);

-

-void

-Dot11d_UpdateCountryIe(

-	struct ieee80211_device *dev,

-	u8 *		pTaddr,

-	u16	CoutryIeLen,

-	u8 * pCoutryIe	 

-	);

-

-u8

-DOT11D_GetMaxTxPwrInDbm(

-	struct ieee80211_device *dev,

-	u8 Channel

-	);

-

-void

-DOT11D_ScanComplete(

-	struct ieee80211_device * dev

-	);

-

-int IsLegalChannel(

-	struct ieee80211_device * dev,

-	u8 channel

-);

-

-int ToLegalChannel(

-	struct ieee80211_device * dev,

-	u8 channel

-);

-

-void dump_chnl_map(u8 * channel_map);

-#endif // #ifndef __INC_DOT11D_H

+#ifndef __INC_DOT11D_H
+#define __INC_DOT11D_H
+
+#include "ieee80211.h"
+
+//#define ENABLE_DOT11D
+
+//#define DOT11D_MAX_CHNL_NUM 83
+
+typedef struct _CHNL_TXPOWER_TRIPLE {
+	u8 FirstChnl;
+	u8  NumChnls;
+	u8  MaxTxPowerInDbm;
+}CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE;
+
+typedef enum _DOT11D_STATE {
+	DOT11D_STATE_NONE = 0,
+	DOT11D_STATE_LEARNED,
+	DOT11D_STATE_DONE,
+}DOT11D_STATE;
+
+typedef struct _RT_DOT11D_INFO {
+	//DECLARE_RT_OBJECT(RT_DOT11D_INFO);
+
+	bool bEnabled; // dot11MultiDomainCapabilityEnabled
+
+	u16 CountryIeLen; // > 0 if CountryIeBuf[] contains valid country information element.
+	u8  CountryIeBuf[MAX_IE_LEN];
+	u8  CountryIeSrcAddr[6]; // Source AP of the country IE.
+	u8  CountryIeWatchdog;
+
+	u8  channel_map[MAX_CHANNEL_NUMBER+1];  //!!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan)
+	//u8  ChnlListLen; // #Bytes valid in ChnlList[].
+	//u8  ChnlList[DOT11D_MAX_CHNL_NUM];
+	u8  MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1];
+
+	DOT11D_STATE State;
+}RT_DOT11D_INFO, *PRT_DOT11D_INFO;
+#define eqMacAddr(a,b)		( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 )
+#define cpMacAddr(des,src)	      ((des)[0]=(src)[0],(des)[1]=(src)[1],(des)[2]=(src)[2],(des)[3]=(src)[3],(des)[4]=(src)[4],(des)[5]=(src)[5])
+#define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo))
+
+#define IS_DOT11D_ENABLE(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->bEnabled
+#define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0)
+
+#define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
+#define UPDATE_CIE_SRC(__pIeeeDev, __pTa) cpMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
+
+#define IS_COUNTRY_IE_CHANGED(__pIeeeDev, __Ie) \
+	(((__Ie).Length == 0 || (__Ie).Length != GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen) ? \
+	FALSE : \
+	(!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length)))
+
+#define CIE_WATCHDOG_TH 1
+#define GET_CIE_WATCHDOG(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog
+#define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0
+#define UPDATE_CIE_WATCHDOG(__pIeeeDev) ++GET_CIE_WATCHDOG(__pIeeeDev)
+
+#define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE)
+
+
+void
+Dot11d_Init(
+	struct ieee80211_device *dev
+	);
+
+void
+Dot11d_Reset(
+	struct ieee80211_device *dev
+	);
+
+void
+Dot11d_UpdateCountryIe(
+	struct ieee80211_device *dev,
+	u8 *		pTaddr,
+	u16	CoutryIeLen,
+	u8 * pCoutryIe
+	);
+
+u8
+DOT11D_GetMaxTxPwrInDbm(
+	struct ieee80211_device *dev,
+	u8 Channel
+	);
+
+void
+DOT11D_ScanComplete(
+	struct ieee80211_device * dev
+	);
+
+int IsLegalChannel(
+	struct ieee80211_device * dev,
+	u8 channel
+);
+
+int ToLegalChannel(
+	struct ieee80211_device * dev,
+	u8 channel
+);
+
+void dump_chnl_map(u8 * channel_map);
+#endif // #ifndef __INC_DOT11D_H
diff --git a/drivers/staging/rtl8187se/r8180_dm.c b/drivers/staging/rtl8187se/r8180_dm.c
index 742dc11fcac..93b5a7bb255 100644
--- a/drivers/staging/rtl8187se/r8180_dm.c
+++ b/drivers/staging/rtl8187se/r8180_dm.c
@@ -1,1725 +1,1725 @@
-//#include "r8180.h"

-#include "r8180_dm.h"

-#include "r8180_hw.h"

-#include "r8180_93cx6.h"

-//{by amy 080312

-

-//

-//	Description:

-//		Return TRUE if we shall perform High Power Mecahnism, FALSE otherwise.	

-//

-//+by amy 080312

-#define RATE_ADAPTIVE_TIMER_PERIOD      300

-

-bool CheckHighPower(struct net_device *dev)

-{

-	struct r8180_priv *priv = ieee80211_priv(dev);

-	struct ieee80211_device *ieee = priv->ieee80211;

-

-	if(!priv->bRegHighPowerMechanism)

-	{

-		return false;

-	}

-		

-	if(ieee->state == IEEE80211_LINKED_SCANNING)

-	{

-		return false;

-	}

-

-	return true;

-}

-

-//

-//	Description:

-//		Update Tx power level if necessary.

-//		See also DoRxHighPower() and SetTxPowerLevel8185() for reference.

-//

-//	Note:

-//		The reason why we udpate Tx power level here instead of DoRxHighPower() 

-//		is the number of IO to change Tx power is much more than chane TR switch 

-//		and they are related to OFDM and MAC registers. 

-//		So, we don't want to update it so frequently in per-Rx packet base. 

-//

-void

-DoTxHighPower(

-	struct net_device *dev

-	)

-{

-	struct r8180_priv *priv = ieee80211_priv(dev);

-	u16			HiPwrUpperTh = 0;

-	u16			HiPwrLowerTh = 0;

-	u8			RSSIHiPwrUpperTh;

-	u8			RSSIHiPwrLowerTh;

-	u8			u1bTmp;

-	char			OfdmTxPwrIdx, CckTxPwrIdx;

-

-	//printk("----> DoTxHighPower()\n");

-

-	HiPwrUpperTh = priv->RegHiPwrUpperTh;

-	HiPwrLowerTh = priv->RegHiPwrLowerTh;						

-	

-	HiPwrUpperTh = HiPwrUpperTh * 10;

-	HiPwrLowerTh = HiPwrLowerTh * 10;

-	RSSIHiPwrUpperTh = priv->RegRSSIHiPwrUpperTh;

-	RSSIHiPwrLowerTh = priv->RegRSSIHiPwrLowerTh;

-

-	//lzm add 080826

-	OfdmTxPwrIdx  = priv->chtxpwr_ofdm[priv->ieee80211->current_network.channel]; 

-	CckTxPwrIdx  = priv->chtxpwr[priv->ieee80211->current_network.channel]; 

-

-	//	printk("DoTxHighPower() - UndecoratedSmoothedSS:%d, CurCCKRSSI = %d , bCurCCKPkt= %d \n", priv->UndecoratedSmoothedSS, priv->CurCCKRSSI, priv->bCurCCKPkt );

-	

-	if((priv->UndecoratedSmoothedSS > HiPwrUpperTh) ||

-		(priv->bCurCCKPkt && (priv->CurCCKRSSI > RSSIHiPwrUpperTh)))

-	{

-		// Stevenl suggested that degrade 8dbm in high power sate. 2007-12-04 Isaiah 

-		

-	//	printk("=====>DoTxHighPower() - High Power - UndecoratedSmoothedSS:%d,  HiPwrUpperTh = %d \n", priv->UndecoratedSmoothedSS, HiPwrUpperTh );

-		priv->bToUpdateTxPwr = true;

-		u1bTmp= read_nic_byte(dev, CCK_TXAGC);

-

-		// If it never enter High Power.

-		if( CckTxPwrIdx == u1bTmp)

-		{

-		u1bTmp = (u1bTmp > 16) ? (u1bTmp -16): 0;  // 8dbm

-		write_nic_byte(dev, CCK_TXAGC, u1bTmp);

-

-		u1bTmp= read_nic_byte(dev, OFDM_TXAGC);

-		u1bTmp = (u1bTmp > 16) ? (u1bTmp -16): 0;  // 8dbm

-		write_nic_byte(dev, OFDM_TXAGC, u1bTmp);

-		}

-		

-	}

-	else if((priv->UndecoratedSmoothedSS < HiPwrLowerTh) &&

-		(!priv->bCurCCKPkt || priv->CurCCKRSSI < RSSIHiPwrLowerTh))

-	{

-	//	 printk("DoTxHighPower() - lower Power - UndecoratedSmoothedSS:%d,  HiPwrUpperTh = %d \n", priv->UndecoratedSmoothedSS, HiPwrLowerTh );

-		if(priv->bToUpdateTxPwr)

-		{

-			priv->bToUpdateTxPwr = false;

-			//SD3 required.

-			u1bTmp= read_nic_byte(dev, CCK_TXAGC);			

-			if(u1bTmp < CckTxPwrIdx)

-			{

-			//u1bTmp = ((u1bTmp+16) > 35) ? 35: (u1bTmp+16);  // 8dbm

-			//write_nic_byte(dev, CCK_TXAGC, u1bTmp);

-			write_nic_byte(dev, CCK_TXAGC, CckTxPwrIdx);

-			}

-

-			u1bTmp= read_nic_byte(dev, OFDM_TXAGC);

-			if(u1bTmp < OfdmTxPwrIdx)

-			{

-			//u1bTmp = ((u1bTmp+16) > 35) ? 35: (u1bTmp+16);  // 8dbm

-			//write_nic_byte(dev, OFDM_TXAGC, u1bTmp);

-			write_nic_byte(dev, OFDM_TXAGC, OfdmTxPwrIdx);

-			}

-		}

-	}

-

-	//printk("<---- DoTxHighPower()\n");

-}

-

-

-//

-//	Description:

-//		Callback function of UpdateTxPowerWorkItem.

-//		Because of some event happend, e.g. CCX TPC, High Power Mechanism, 

-//		We update Tx power of current channel again. 

-//

-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))

-void rtl8180_tx_pw_wq (struct work_struct *work)

-{

-//      struct r8180_priv *priv = container_of(work, struct r8180_priv, watch_dog_wq);

-//      struct ieee80211_device * ieee = (struct ieee80211_device*)

-//                                             container_of(work, struct ieee80211_device, watch_dog_wq);

-        struct delayed_work *dwork = container_of(work,struct delayed_work,work);

-        struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,tx_pw_wq);

-        struct net_device *dev = ieee->dev;

-#else

-void rtl8180_tx_pw_wq(struct net_device *dev)

-{

-	// struct r8180_priv *priv = ieee80211_priv(dev);

-#endif

-

-//	printk("----> UpdateTxPowerWorkItemCallback()\n");

-	

-	DoTxHighPower(dev);	

-	

-//	printk("<---- UpdateTxPowerWorkItemCallback()\n");

-}

-

-

-//

-//	Description:

-//		Return TRUE if we shall perform DIG Mecahnism, FALSE otherwise.	

-//

-bool

-CheckDig(

-	struct net_device *dev

-	)

-{

-	struct r8180_priv *priv = ieee80211_priv(dev);

-	struct ieee80211_device *ieee = priv->ieee80211;

-

-	if(!priv->bDigMechanism)

-		return false;

-

-	if(ieee->state != IEEE80211_LINKED)

-		return false;

-

-	//if(priv->CurrentOperaRate < 36) // Schedule Dig under all OFDM rates. By Bruce, 2007-06-01.

-	if((priv->ieee80211->rate/5) < 36) // Schedule Dig under all OFDM rates. By Bruce, 2007-06-01.

-		return false;

-	return true;

-}

-//

-//	Description:

-//		Implementation of DIG for Zebra and Zebra2.	

-//

-void

-DIG_Zebra(

-	struct net_device *dev

-	)

-{

-	struct r8180_priv *priv = ieee80211_priv(dev);

-	u16			CCKFalseAlarm, OFDMFalseAlarm;

-	u16			OfdmFA1, OfdmFA2;

-	int			InitialGainStep = 7; // The number of initial gain stages.

-	int			LowestGainStage = 4; // The capable lowest stage of performing dig workitem.

-	u32 			AwakePeriodIn2Sec=0;

-

-	//printk("---------> DIG_Zebra()\n");

-

-	CCKFalseAlarm = (u16)(priv->FalseAlarmRegValue & 0x0000ffff);

-	OFDMFalseAlarm = (u16)((priv->FalseAlarmRegValue >> 16) & 0x0000ffff);

-	OfdmFA1 =  0x15;

-	OfdmFA2 = ((u16)(priv->RegDigOfdmFaUpTh)) << 8;

-

-//	printk("DIG**********CCK False Alarm: %#X \n",CCKFalseAlarm);

-//	printk("DIG**********OFDM False Alarm: %#X \n",OFDMFalseAlarm);

-

-        // The number of initial gain steps is different, by Bruce, 2007-04-13.

-	if (priv->InitialGain == 0 ) //autoDIG

-	{ // Advised from SD3 DZ

-		priv->InitialGain = 4; // In 87B, m74dBm means State 4 (m82dBm)

-	}

-	//if(pHalData->VersionID != VERSION_8187B_B)

-	{ // Advised from SD3 DZ

-		OfdmFA1 =  0x20;

-	}

-	

-#if 1 //lzm reserved 080826

-	AwakePeriodIn2Sec = (2000-priv ->DozePeriodInPast2Sec);

-	//printk("&&& DozePeriod=%d AwakePeriod=%d\n", priv->DozePeriodInPast2Sec, AwakePeriodIn2Sec);

-	priv ->DozePeriodInPast2Sec=0;

-	

-	if(AwakePeriodIn2Sec)

-	{	

-		//RT_TRACE(COMP_DIG, DBG_TRACE, ("DIG: AwakePeriodIn2Sec(%d) - FATh(0x%X , 0x%X) ->",AwakePeriodIn2Sec, OfdmFA1, OfdmFA2));

-		// adjuest DIG threshold.

-		OfdmFA1 =  (u16)((OfdmFA1*AwakePeriodIn2Sec)  / 2000) ;  	

-		OfdmFA2 =  (u16)((OfdmFA2*AwakePeriodIn2Sec)  / 2000) ;

-		//RT_TRACE(COMP_DIG, DBG_TRACE, ("( 0x%X , 0x%X)\n", OfdmFA1, OfdmFA2));

-	}

-	else

-	{

-		;//RT_TRACE(COMP_DIG, DBG_WARNING, ("ERROR!!  AwakePeriodIn2Sec should not be ZERO!!\n"));

-	}

-#endif

-

-	InitialGainStep = 8;

-	LowestGainStage = priv->RegBModeGainStage; // Lowest gain stage.

-

-	if (OFDMFalseAlarm > OfdmFA1)

-	{

-		if (OFDMFalseAlarm > OfdmFA2)

-		{

-			priv->DIG_NumberFallbackVote++;

-			if (priv->DIG_NumberFallbackVote >1)

-			{

-				//serious OFDM  False Alarm, need fallback

-				if (priv->InitialGain < InitialGainStep)

-				{

-					priv->InitialGainBackUp= priv->InitialGain;

-

-					priv->InitialGain = (priv->InitialGain + 1);

-//					printk("DIG**********OFDM False Alarm: %#X,  OfdmFA1: %#X, OfdmFA2: %#X\n", OFDMFalseAlarm, OfdmFA1, OfdmFA2);

-//					printk("DIG+++++++ fallback OFDM:%d \n", priv->InitialGain);

-					UpdateInitialGain(dev); 

-				}

-				priv->DIG_NumberFallbackVote = 0;

-				priv->DIG_NumberUpgradeVote=0;

-			}

-		}

-		else

-		{

-			if (priv->DIG_NumberFallbackVote)

-				priv->DIG_NumberFallbackVote--;

-		}

-		priv->DIG_NumberUpgradeVote=0;		

-	}

-	else	

-	{

-		if (priv->DIG_NumberFallbackVote)

-			priv->DIG_NumberFallbackVote--;

-		priv->DIG_NumberUpgradeVote++;

-

-		if (priv->DIG_NumberUpgradeVote>9)

-		{

-			if (priv->InitialGain > LowestGainStage) // In 87B, m78dBm means State 4 (m864dBm)

-			{

-				priv->InitialGainBackUp= priv->InitialGain;

-

-				priv->InitialGain = (priv->InitialGain - 1);

-//				printk("DIG**********OFDM False Alarm: %#X,  OfdmFA1: %#X, OfdmFA2: %#X\n", OFDMFalseAlarm, OfdmFA1, OfdmFA2);

-//				printk("DIG--------- Upgrade OFDM:%d \n", priv->InitialGain);

-				UpdateInitialGain(dev); 

-			}

-			priv->DIG_NumberFallbackVote = 0;

-			priv->DIG_NumberUpgradeVote=0;

-		}

-	}

-

-//	printk("DIG+++++++ OFDM:%d\n", priv->InitialGain);	

-	//printk("<--------- DIG_Zebra()\n");

-}

-

-//

-//	Description:

-//		Dispatch DIG implementation according to RF. 	

-//

-void

-DynamicInitGain(

-	struct net_device *dev

-	)

-{

-	struct r8180_priv *priv = ieee80211_priv(dev);

-

-	switch(priv->rf_chip)

-	{

-		case RF_ZEBRA2:  // [AnnieWorkaround] For Zebra2, 2005-08-01.

-		case RF_ZEBRA4:

-			DIG_Zebra( dev );

-			break;

-		

-		default:

-			printk("DynamicInitGain(): unknown RFChipID(%d) !!!\n", priv->rf_chip);

-			break;

-	}

-}

-

-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))

-void rtl8180_hw_dig_wq (struct work_struct *work)

-{

-//      struct r8180_priv *priv = container_of(work, struct r8180_priv, watch_dog_wq);

-//      struct ieee80211_device * ieee = (struct ieee80211_device*)

-//                                             container_of(work, struct ieee80211_device, watch_dog_wq);

-        struct delayed_work *dwork = container_of(work,struct delayed_work,work);

-        struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,hw_dig_wq);

-        struct net_device *dev = ieee->dev;

-#else

-void rtl8180_hw_dig_wq(struct net_device *dev)

-{

-	

-#endif

-	struct r8180_priv *priv = ieee80211_priv(dev);

-

-	// Read CCK and OFDM False Alarm.

-	priv->FalseAlarmRegValue = read_nic_dword(dev, CCK_FALSE_ALARM);

-	

-

-	// Adjust Initial Gain dynamically.

-	DynamicInitGain(dev);

-	

-}

-

-int

-IncludedInSupportedRates(

-        struct r8180_priv       *priv,

-        u8              TxRate  )

-{

-    u8 rate_len;

-        u8 rate_ex_len;

-        u8                      RateMask = 0x7F;

-        u8                      idx;

-        unsigned short          Found = 0;

-        u8                      NaiveTxRate = TxRate&RateMask;

-

-    rate_len = priv->ieee80211->current_network.rates_len;

-        rate_ex_len = priv->ieee80211->current_network.rates_ex_len;

-        for( idx=0; idx< rate_len; idx++ )

-        {

-                if( (priv->ieee80211->current_network.rates[idx] & RateMask) == NaiveTxRate )

-                {

-                        Found = 1;

-                        goto found_rate;

-                }

-        }

-    for( idx=0; idx< rate_ex_len; idx++ )

-        {

-                if( (priv->ieee80211->current_network.rates_ex[idx] & RateMask) == NaiveTxRate )

-                {

-                        Found = 1;

-                        goto found_rate;

-                }

-        }

-        return Found;

-        found_rate:

-        return Found;

-}

-

-//

-//      Description:

-//              Get the Tx rate one degree up form the input rate in the supported rates.

-//              Return the upgrade rate if it is successed, otherwise return the input rate.

-//      By Bruce, 2007-06-05.

-// 

-u8

-GetUpgradeTxRate(

-        struct net_device *dev,

-        u8                              rate

-        )

-{

-        struct r8180_priv *priv = ieee80211_priv(dev);

-        u8                      UpRate;

-

-        // Upgrade 1 degree.

-        switch(rate)

-        {

-        case 108: // Up to 54Mbps.

-                UpRate = 108;

-                break;

-

-        case 96: // Up to 54Mbps.

-                UpRate = 108;

-                break;

-

-        case 72: // Up to 48Mbps.

-                UpRate = 96;

-                break;

-

-        case 48: // Up to 36Mbps.

-                UpRate = 72;

-                break;

-

-        case 36: // Up to 24Mbps.

-                UpRate = 48;

-                break;

-

-        case 22: // Up to 18Mbps.

-                UpRate = 36;

-                break;

-

-        case 11: // Up to 11Mbps.

-                UpRate = 22;

-                break;

-

-        case 4: // Up to 5.5Mbps.

-                UpRate = 11;

-                break;

-

-        case 2: // Up to 2Mbps.

-                UpRate = 4;

-                break;

-

-        default:

-                printk("GetUpgradeTxRate(): Input Tx Rate(%d) is undefined!\n", rate);

-                return rate;

-        }

-        // Check if the rate is valid.

-        if(IncludedInSupportedRates(priv, UpRate))

-        {

-//              printk("GetUpgradeTxRate(): GetUpgrade Tx rate(%d) from %d !\n", UpRate, priv->CurrentOperaRate);

-                return UpRate;

-        }

-        else

-        {

-                //printk("GetUpgradeTxRate(): Tx rate (%d) is not in supported rates\n", UpRate);

-                return rate;

-        }

-        return rate;

-}

-//

-//      Description:

-//              Get the Tx rate one degree down form the input rate in the supported rates.

-//              Return the degrade rate if it is successed, otherwise return the input rate.

-//      By Bruce, 2007-06-05.

-// 

-u8

-GetDegradeTxRate(

-        struct net_device *dev,

-        u8         rate

-        )

-{

-        struct r8180_priv *priv = ieee80211_priv(dev);

-        u8                      DownRate;

-

-        // Upgrade 1 degree.

-        switch(rate)

-        {

-        case 108: // Down to 48Mbps.

-                DownRate = 96;

-                break;

-

-        case 96: // Down to 36Mbps.

-                DownRate = 72;

-                break;

-

-        case 72: // Down to 24Mbps.

-                DownRate = 48;

-                break;

-

-        case 48: // Down to 18Mbps.

-                DownRate = 36;

-                break;

-

-        case 36: // Down to 11Mbps.

-                DownRate = 22;

-                break;

-

-        case 22: // Down to 5.5Mbps.

-                DownRate = 11;

-                break;

-

-        case 11: // Down to 2Mbps.

-                DownRate = 4;

-                break;

-

-        case 4: // Down to 1Mbps.

-                DownRate = 2;

-                break;

-

-        case 2: // Down to 1Mbps.

-                DownRate = 2;

-                break;

-

-        default:

-                printk("GetDegradeTxRate(): Input Tx Rate(%d) is undefined!\n", rate);

-                return rate;

-        }

-        // Check if the rate is valid.

-        if(IncludedInSupportedRates(priv, DownRate))

-        {

-//              printk("GetDegradeTxRate(): GetDegrade Tx rate(%d) from %d!\n", DownRate, priv->CurrentOperaRate);

-                return DownRate;

-        }

-        else

-        {

-                //printk("GetDegradeTxRate(): Tx rate (%d) is not in supported rates\n", DownRate);

-                return rate;

-        }

-        return rate;

-}

-//

-//      Helper function to determine if specified data rate is 

-//      CCK rate.

-//      2005.01.25, by rcnjko.

-//

-bool

-MgntIsCckRate(

-        u16     rate

-        )

-{

-        bool bReturn = false;

-

-        if((rate <= 22) && (rate != 12) && (rate != 18))

-        {

-                bReturn = true;

-        }

-

-        return bReturn;

-}

-#ifdef CONFIG_RTL818X_S

-//

-//	Description:

-//		Tx Power tracking mechanism routine on 87SE.

-// 	Created by Roger, 2007.12.11.

-//

-void

-TxPwrTracking87SE(

-	struct net_device *dev

-)

-{		

-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);

-	u8	tmpu1Byte, CurrentThermal, Idx;	

-	char	CckTxPwrIdx, OfdmTxPwrIdx;	

-	//u32	u4bRfReg;

-	

-	tmpu1Byte = read_nic_byte(dev, EN_LPF_CAL);

-	CurrentThermal = (tmpu1Byte & 0xf0)>>4; //[ 7:4]: thermal meter indication.

-	CurrentThermal = (CurrentThermal>0x0c)? 0x0c:CurrentThermal;//lzm add 080826

-

-	//printk("TxPwrTracking87SE(): CurrentThermal(%d)\n", CurrentThermal);

-	

-	if( CurrentThermal != priv->ThermalMeter)

-	{	

-//		printk("TxPwrTracking87SE(): Thermal meter changed!!!\n");

-

-		// Update Tx Power level on each channel.

-		for(Idx = 1; Idx<15; Idx++)

-		{			

-			CckTxPwrIdx = priv->chtxpwr[Idx];

-			OfdmTxPwrIdx = priv->chtxpwr_ofdm[Idx];			

-			

-			if( CurrentThermal > priv->ThermalMeter )

-			{ // higher thermal meter.		

-				CckTxPwrIdx += (CurrentThermal - priv->ThermalMeter)*2;

-				OfdmTxPwrIdx += (CurrentThermal - priv->ThermalMeter)*2;

-			

-				if(CckTxPwrIdx >35)

-					CckTxPwrIdx = 35; // Force TxPower to maximal index.

-				if(OfdmTxPwrIdx >35)

-					OfdmTxPwrIdx = 35;				

-			}

-			else

-			{ // lower thermal meter.				

-				CckTxPwrIdx -= (priv->ThermalMeter - CurrentThermal)*2;

-				OfdmTxPwrIdx -= (priv->ThermalMeter - CurrentThermal)*2;

-

-				if(CckTxPwrIdx <0)

-					CckTxPwrIdx = 0;		

-				if(OfdmTxPwrIdx <0)

-					OfdmTxPwrIdx = 0;				

-			}					

-			

-			// Update TxPower level on CCK and OFDM resp.

-			priv->chtxpwr[Idx] = CckTxPwrIdx;

-			priv->chtxpwr_ofdm[Idx] = OfdmTxPwrIdx;				

-		}	

-

-		// Update TxPower level immediately.

-		rtl8225z2_SetTXPowerLevel(dev, priv->ieee80211->current_network.channel);

-	}	

-	priv->ThermalMeter = CurrentThermal;					

-}

-void

-StaRateAdaptive87SE(

-	struct net_device *dev

-	)

-{

-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);

-	unsigned long 			CurrTxokCnt;

-	u16			CurrRetryCnt;

-	u16			CurrRetryRate;

-	//u16			i,idx;

-	unsigned long       	CurrRxokCnt;

-	bool			bTryUp = false;

-	bool			bTryDown = false;

-	u8			TryUpTh = 1;

-	u8			TryDownTh = 2;

-	u32			TxThroughput;

-	long		CurrSignalStrength;

-	bool		bUpdateInitialGain = false;

-    	u8			u1bOfdm=0, u1bCck = 0;

-	char		OfdmTxPwrIdx, CckTxPwrIdx;	

-

-	priv->RateAdaptivePeriod= RATE_ADAPTIVE_TIMER_PERIOD;

-

-

-	CurrRetryCnt	= priv->CurrRetryCnt;

-	CurrTxokCnt	= priv->NumTxOkTotal - priv->LastTxokCnt;

-	CurrRxokCnt	= priv->ieee80211->NumRxOkTotal - priv->LastRxokCnt;

-	CurrSignalStrength = priv->Stats_RecvSignalPower;

-	TxThroughput = (u32)(priv->NumTxOkBytesTotal - priv->LastTxOKBytes);

-	priv->LastTxOKBytes = priv->NumTxOkBytesTotal;

-	priv->CurrentOperaRate = priv->ieee80211->rate/5;

-	//printk("priv->CurrentOperaRate is %d\n",priv->CurrentOperaRate);

-	//2 Compute retry ratio.

-	if (CurrTxokCnt>0)

-	{

-		CurrRetryRate = (u16)(CurrRetryCnt*100/CurrTxokCnt);

-	}

-	else

-	{ // It may be serious retry. To distinguish serious retry or no packets modified by Bruce

-		CurrRetryRate = (u16)(CurrRetryCnt*100/1);

-	}

-

-

-	//

-	// Added by Roger, 2007.01.02.

-	// For debug information.

-	//

-	//printk("\n(1) pHalData->LastRetryRate: %d \n",priv->LastRetryRate);

-	//printk("(2) RetryCnt = %d  \n", CurrRetryCnt);	

-	//printk("(3) TxokCnt = %d \n", CurrTxokCnt);

-	//printk("(4) CurrRetryRate = %d \n", CurrRetryRate);	

-	//printk("(5) CurrSignalStrength = %d \n",CurrSignalStrength);

-	//printk("(6) TxThroughput is %d\n",TxThroughput);

-	//printk("priv->NumTxOkBytesTotal is %d\n",priv->NumTxOkBytesTotal);		

-

-	priv->LastRetryCnt = priv->CurrRetryCnt;

-	priv->LastTxokCnt = priv->NumTxOkTotal;

-	priv->LastRxokCnt = priv->ieee80211->NumRxOkTotal;

-	priv->CurrRetryCnt = 0;

-

-	//2No Tx packets, return to init_rate or not?

-	if (CurrRetryRate==0 && CurrTxokCnt == 0)

-	{	

-		//

-		//After 9 (30*300ms) seconds in this condition, we try to raise rate.

-		//

-		priv->TryupingCountNoData++;

-		

-//		printk("No Tx packets, TryupingCountNoData(%d)\n", priv->TryupingCountNoData);

-		//[TRC Dell Lab] Extend raised period from 4.5sec to 9sec, Isaiah 2008-02-15 18:00 

-		if (priv->TryupingCountNoData>30)

-		{

-			priv->TryupingCountNoData = 0;

-		 	priv->CurrentOperaRate = GetUpgradeTxRate(dev, priv->CurrentOperaRate);		

-			// Reset Fail Record

-			priv->LastFailTxRate = 0;

-			priv->LastFailTxRateSS = -200;

-			priv->FailTxRateCount = 0;

-		}

-		goto SetInitialGain;

-	}

-        else

-	{

-		priv->TryupingCountNoData=0; //Reset trying up times.

-	}

-

-

-	//

-	// For Netgear case, I comment out the following signal strength estimation,

-	// which can results in lower rate to transmit when sample is NOT enough (e.g. PING request).  

-	// 2007.04.09, by Roger.	

-	//	

-

-	//

-	// Restructure rate adaptive as the following main stages:

-	// (1) Add retry threshold in 54M upgrading condition with signal strength.

-	// (2) Add the mechanism to degrade to CCK rate according to signal strength 

-	//		and retry rate.

-	// (3) Remove all Initial Gain Updates over OFDM rate. To avoid the complicated 

-	//		situation, Initial Gain Update is upon on DIG mechanism except CCK rate.

-	// (4) Add the mehanism of trying to upgrade tx rate.

-	// (5) Record the information of upping tx rate to avoid trying upping tx rate constantly.

-	// By Bruce, 2007-06-05.

-	//	

-	//

-

-	// 11Mbps or 36Mbps

-	// Check more times in these rate(key rates).

-	//

-	if(priv->CurrentOperaRate == 22 || priv->CurrentOperaRate == 72)

-	{ 

-		TryUpTh += 9;

-	}

-	//

-	// Let these rates down more difficult.

-	//

-	if(MgntIsCckRate(priv->CurrentOperaRate) || priv->CurrentOperaRate == 36)

-	{

-			TryDownTh += 1;

-	}

-

-	//1 Adjust Rate.

-	if (priv->bTryuping == true)

-	{	

-		//2 For Test Upgrading mechanism

-		// Note:

-		// 	Sometimes the throughput is upon on the capability bwtween the AP and NIC,

-		// 	thus the low data rate does not improve the performance.

-		// 	We randomly upgrade the data rate and check if the retry rate is improved.

-		

-		// Upgrading rate did not improve the retry rate, fallback to the original rate.

-		if ( (CurrRetryRate > 25) && TxThroughput < priv->LastTxThroughput)

-		{

-			//Not necessary raising rate, fall back rate.

-			bTryDown = true;

-			//printk("case1-1: Not necessary raising rate, fall back rate....\n");

-			//printk("case1-1: pMgntInfo->CurrentOperaRate =%d, TxThroughput = %d, LastThroughput = %d\n",

-			//		priv->CurrentOperaRate, TxThroughput, priv->LastTxThroughput);			

-		}

-		else

-		{

-			priv->bTryuping = false;

-		}

-	}	

-	else if (CurrSignalStrength > -47 && (CurrRetryRate < 50))

-	{

-		//2For High Power

-		//

-		// Added by Roger, 2007.04.09.

-		// Return to highest data rate, if signal strength is good enough.

-		// SignalStrength threshold(-50dbm) is for RTL8186.

-		// Revise SignalStrength threshold to -51dbm.	

-		//

-		// Also need to check retry rate for safety, by Bruce, 2007-06-05.

-		if(priv->CurrentOperaRate != priv->ieee80211->current_network.HighestOperaRate )

-		{

-			bTryUp = true;

-			// Upgrade Tx Rate directly.

-			priv->TryupingCount += TryUpTh;

-		}

-//		printk("case2: StaRateAdaptive87SE: Power(%d) is high enough!!. \n", CurrSignalStrength);			

-					

-	}

-	else if(CurrTxokCnt > 9 && CurrTxokCnt< 100 && CurrRetryRate >= 600) 

-	{

-		//2 For Serious Retry

-		//

-		// Traffic is not busy but our Tx retry is serious. 

-		//

-		bTryDown = true;

-		// Let Rate Mechanism to degrade tx rate directly.

-		priv->TryDownCountLowData += TryDownTh;

-//		printk("case3: RA: Tx Retry is serious. Degrade Tx Rate to %d directly...\n", priv->CurrentOperaRate);	

-	}

-	else if ( priv->CurrentOperaRate == 108 )

-	{

-		//2For 54Mbps

-		// Air Link

-		if ( (CurrRetryRate>26)&&(priv->LastRetryRate>25))

-//		if ( (CurrRetryRate>40)&&(priv->LastRetryRate>39))

-		{

-			//Down to rate 48Mbps.

-			bTryDown = true;

-		}

-		// Cable Link

-		else if ( (CurrRetryRate>17)&&(priv->LastRetryRate>16) && (CurrSignalStrength > -72)) 

-//		else if ( (CurrRetryRate>17)&&(priv->LastRetryRate>16) && (CurrSignalStrength > -72))

-		{

-			//Down to rate 48Mbps.

-			bTryDown = true;

-		}

-

-		if(bTryDown && (CurrSignalStrength < -75)) //cable link

-		{

-			priv->TryDownCountLowData += TryDownTh;

-		}

-		//printk("case4---54M \n");	

-

-	}

-	else if ( priv->CurrentOperaRate == 96 )

-	{

-		//2For 48Mbps

-		//Air Link

-		if ( ((CurrRetryRate>48) && (priv->LastRetryRate>47)))

-//		if ( ((CurrRetryRate>65) && (priv->LastRetryRate>64)))

-

-		{	

-			//Down to rate 36Mbps.

-			bTryDown = true;

-		}

-		//Cable Link

-		else if ( ((CurrRetryRate>21) && (priv->LastRetryRate>20)) && (CurrSignalStrength > -74))

-		{

-			//Down to rate 36Mbps.

-			bTryDown = true;

-		}

-		else if((CurrRetryRate>  (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 ))

-//		else if((CurrRetryRate>  (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 ))

-		{

-			bTryDown = true;

-			priv->TryDownCountLowData += TryDownTh;

-		}

-		else if ( (CurrRetryRate<8) && (priv->LastRetryRate<8) ) //TO DO: need to consider (RSSI)

-//		else if ( (CurrRetryRate<28) && (priv->LastRetryRate<8) ) 

-		{

-			bTryUp = true;

-		}

-

-		if(bTryDown && (CurrSignalStrength < -75))

-		{

-			priv->TryDownCountLowData += TryDownTh;

-		}

-		//printk("case5---48M \n");	

-	}

-	else if ( priv->CurrentOperaRate == 72 )

-	{

-		//2For 36Mbps

-		if ( (CurrRetryRate>43) && (priv->LastRetryRate>41)) 

-//		if ( (CurrRetryRate>60) && (priv->LastRetryRate>59))

-		{	

-			//Down to rate 24Mbps.

-			bTryDown = true;

-		}

-		else if((CurrRetryRate>  (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 ))

-//		else if((CurrRetryRate>  (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 ))

-		{

-			bTryDown = true;

-			priv->TryDownCountLowData += TryDownTh;

-		}

-		else if ( (CurrRetryRate<15) &&  (priv->LastRetryRate<16)) //TO DO: need to consider (RSSI)

-//		else if ( (CurrRetryRate<35) &&  (priv->LastRetryRate<36))

-		{

-			bTryUp = true;

-		}

-

-		if(bTryDown && (CurrSignalStrength < -80))

-		{

-			priv->TryDownCountLowData += TryDownTh;

-		}

-		//printk("case6---36M \n");	

-	}

-	else if ( priv->CurrentOperaRate == 48 )

-	{

-		//2For 24Mbps

-		// Air Link

-		if ( ((CurrRetryRate>63) && (priv->LastRetryRate>62)))

-//		if ( ((CurrRetryRate>83) && (priv->LastRetryRate>82)))

-		{	

-			//Down to rate 18Mbps.

-			bTryDown = true;

-		}

-		//Cable Link

-		else if ( ((CurrRetryRate>33) && (priv->LastRetryRate>32)) && (CurrSignalStrength > -82) )

-//		 else if ( ((CurrRetryRate>50) && (priv->LastRetryRate>49)) && (CurrSignalStrength > -82) )

-		{

-			//Down to rate 18Mbps.

-			bTryDown = true;

-		}

-		else if((CurrRetryRate>  (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 ))

-//		else if((CurrRetryRate>  (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 ))

-

-		{

-			bTryDown = true;

-			priv->TryDownCountLowData += TryDownTh;

-		}

-  		else if ( (CurrRetryRate<20) && (priv->LastRetryRate<21)) //TO DO: need to consider (RSSI)

-//		else if ( (CurrRetryRate<40) && (priv->LastRetryRate<41))

-		{	

-			bTryUp = true;	

-		}

-

-		if(bTryDown && (CurrSignalStrength < -82))

-		{

-			priv->TryDownCountLowData += TryDownTh;

-		}

-		//printk("case7---24M \n");	

-	}

-	else if ( priv->CurrentOperaRate == 36 )

-	{

-		//2For 18Mbps

-		// original (109, 109) 

-		//[TRC Dell Lab] (90, 91), Isaiah 2008-02-18 23:24

-		//			     (85, 86), Isaiah 2008-02-18 24:00

-		if ( ((CurrRetryRate>85) && (priv->LastRetryRate>86)))

-//		if ( ((CurrRetryRate>115) && (priv->LastRetryRate>116)))

-		{

-			//Down to rate 11Mbps.

-			bTryDown = true;

-		}

-		//[TRC Dell Lab]  Isaiah 2008-02-18 23:24

-		else if((CurrRetryRate>  (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 ))

-//		else if((CurrRetryRate>  (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 ))

-		{

-			bTryDown = true;

-			priv->TryDownCountLowData += TryDownTh;

-		}

-		else if ( (CurrRetryRate<22) && (priv->LastRetryRate<23)) //TO DO: need to consider (RSSI)

-//		else if ( (CurrRetryRate<42) && (priv->LastRetryRate<43))

-		{	

-			bTryUp = true;	

-		}

-		//printk("case8---18M \n");	

-	}

-	else if ( priv->CurrentOperaRate == 22 )

-	{

-		//2For 11Mbps

-		if (CurrRetryRate>95)

-//		if (CurrRetryRate>155)

-		{

-			bTryDown = true;

-		}

-		else if ( (CurrRetryRate<29) && (priv->LastRetryRate <30) )//TO DO: need to consider (RSSI)

-//		else if ( (CurrRetryRate<49) && (priv->LastRetryRate <50) )

-			{

-			bTryUp = true;

-			}

-		//printk("case9---11M \n");	

-		}	

-	else if ( priv->CurrentOperaRate == 11 )

-	{

-		//2For 5.5Mbps

-		if (CurrRetryRate>149) 

-//		if (CurrRetryRate>189)

-		{	

-			bTryDown = true;			

-		}

-		else if ( (CurrRetryRate<60) && (priv->LastRetryRate < 65))

-//		else if ( (CurrRetryRate<80) && (priv->LastRetryRate < 85))

-

-			{

-			bTryUp = true;

-			}		

-		//printk("case10---5.5M \n");	

-		}

-	else if ( priv->CurrentOperaRate == 4 )

-	{

-		//2For 2 Mbps

-		if((CurrRetryRate>99) && (priv->LastRetryRate>99))

-//		if((CurrRetryRate>199) && (priv->LastRetryRate>199))

-		{

-			bTryDown = true;			

-		}

-		else if ( (CurrRetryRate < 65) && (priv->LastRetryRate < 70))

-//		else if ( (CurrRetryRate < 85) && (priv->LastRetryRate < 90))

-		{

-			bTryUp = true;

-		}

-		//printk("case11---2M \n");	

-	}

-	else if ( priv->CurrentOperaRate == 2 )

-	{

-		//2For 1 Mbps

-		if( (CurrRetryRate<70) && (priv->LastRetryRate<75))

-//		if( (CurrRetryRate<90) && (priv->LastRetryRate<95))

-		{

-			bTryUp = true;

-		}

-		//printk("case12---1M \n");	

-	}

-

-	if(bTryUp && bTryDown)

-    	printk("StaRateAdaptive87B(): Tx Rate tried upping and downing simultaneously!\n");

-				

-	//1 Test Upgrading Tx Rate

-	// Sometimes the cause of the low throughput (high retry rate) is the compatibility between the AP and NIC.

-	// To test if the upper rate may cause lower retry rate, this mechanism randomly occurs to test upgrading tx rate.

-	if(!bTryUp && !bTryDown && (priv->TryupingCount == 0) && (priv->TryDownCountLowData == 0)

-		&& priv->CurrentOperaRate != priv->ieee80211->current_network.HighestOperaRate && priv->FailTxRateCount < 2)

-	{

-		if(jiffies% (CurrRetryRate + 101) == 0)

-		{

-			bTryUp = true;	

-			priv->bTryuping = true;

-			//printk("StaRateAdaptive87SE(): Randomly try upgrading...\n");

-		}

-	}

-

-	//1 Rate Mechanism

-	if(bTryUp)

-	{

-		priv->TryupingCount++;

-		priv->TryDownCountLowData = 0;

-			

-		{

-//			printk("UP: pHalData->TryupingCount = %d\n", priv->TryupingCount);

-//			printk("UP: TryUpTh(%d)+ (FailTxRateCount(%d))^2 =%d\n", 

-//				TryUpTh, priv->FailTxRateCount, (TryUpTh + priv->FailTxRateCount * priv->FailTxRateCount) );

-//			printk("UP: pHalData->bTryuping=%d\n",  priv->bTryuping);

-

-		}

-		

-		//

-		// Check more times if we need to upgrade indeed.

-		// Because the largest value of pHalData->TryupingCount is 0xFFFF and 

-		// the largest value of pHalData->FailTxRateCount is 0x14,

-		// this condition will be satisfied at most every 2 min.

-		//

-

-		if((priv->TryupingCount > (TryUpTh + priv->FailTxRateCount * priv->FailTxRateCount)) ||

-			(CurrSignalStrength > priv->LastFailTxRateSS) || priv->bTryuping)

-		{

-			priv->TryupingCount = 0;

-			// 

-			// When transfering from CCK to OFDM, DIG is an important issue.

-			//

-			if(priv->CurrentOperaRate == 22)

-				bUpdateInitialGain = true;

-

-			// The difference in throughput between 48Mbps and 36Mbps is 8M.

-			// So, we must be carefully in this rate scale. Isaiah 2008-02-15.

-			//

-			if(  ((priv->CurrentOperaRate == 72) || (priv->CurrentOperaRate == 48) || (priv->CurrentOperaRate == 36)) &&

-				(priv->FailTxRateCount > 2) )

-				priv->RateAdaptivePeriod= (RATE_ADAPTIVE_TIMER_PERIOD/2);

-			

-			// (1)To avoid upgrade frequently to the fail tx rate, add the FailTxRateCount into the threshold.

-			// (2)If the signal strength is increased, it may be able to upgrade.

-

-			priv->CurrentOperaRate = GetUpgradeTxRate(dev, priv->CurrentOperaRate);

-//			printk("StaRateAdaptive87SE(): Upgrade Tx Rate to %d\n", priv->CurrentOperaRate);

-

-			//[TRC Dell Lab] Bypass 12/9/6, Isaiah 2008-02-18 20:00 

-			if(priv->CurrentOperaRate ==36)

-			{

-				priv->bUpdateARFR=true;

-				write_nic_word(dev, ARFR, 0x0F8F); //bypass 12/9/6

-//				printk("UP: ARFR=0xF8F\n");

-			}

-			else if(priv->bUpdateARFR)

-			{

-				priv->bUpdateARFR=false;

-				write_nic_word(dev, ARFR, 0x0FFF); //set 1M ~ 54Mbps.

-//				printk("UP: ARFR=0xFFF\n");

-			}

-				

-			// Update Fail Tx rate and count.

-			if(priv->LastFailTxRate != priv->CurrentOperaRate)

-			{

-				priv->LastFailTxRate = priv->CurrentOperaRate;

-				priv->FailTxRateCount = 0;

-				priv->LastFailTxRateSS = -200; // Set lowest power.

-			}

-		}

-	}

-	else

-	{	

-		if(priv->TryupingCount > 0)

-			priv->TryupingCount --;

-	}

-	

-	if(bTryDown)

-	{

-		priv->TryDownCountLowData++;

-		priv->TryupingCount = 0;

-		{

-//			printk("DN: pHalData->TryDownCountLowData = %d\n",priv->TryDownCountLowData);

-//			printk("DN: TryDownTh =%d\n", TryDownTh);

-//			printk("DN: pHalData->bTryuping=%d\n",  priv->bTryuping);

-		}

-						

-		//Check if Tx rate can be degraded or Test trying upgrading should fallback.

-		if(priv->TryDownCountLowData > TryDownTh || priv->bTryuping)

-		{

-			priv->TryDownCountLowData = 0;

-			priv->bTryuping = false;

-			// Update fail information.

-			if(priv->LastFailTxRate == priv->CurrentOperaRate)

-			{

-				priv->FailTxRateCount ++;

-				// Record the Tx fail rate signal strength.

-				if(CurrSignalStrength > priv->LastFailTxRateSS)

-				{

-					priv->LastFailTxRateSS = CurrSignalStrength;

-				}

-			}

-			else

-			{

-				priv->LastFailTxRate = priv->CurrentOperaRate;

-				priv->FailTxRateCount = 1;

-				priv->LastFailTxRateSS = CurrSignalStrength;

-			}

-			priv->CurrentOperaRate = GetDegradeTxRate(dev, priv->CurrentOperaRate);

-

-			// Reduce chariot training time at weak signal strength situation. SD3 ED demand. 

-			//[TRC Dell Lab] Revise Signal Threshold from -75 to -80 , Isaiah 2008-02-18 20:00 

-			if( (CurrSignalStrength < -80) && (priv->CurrentOperaRate > 72 ))

-			{

-				priv->CurrentOperaRate = 72;

-//				printk("DN: weak signal strength (%d), degrade to 36Mbps\n", CurrSignalStrength);

-			}

-

-			//[TRC Dell Lab] Bypass 12/9/6, Isaiah 2008-02-18 20:00 

-			if(priv->CurrentOperaRate ==36)

-			{

-				priv->bUpdateARFR=true;

-				write_nic_word(dev, ARFR, 0x0F8F); //bypass 12/9/6

-//				printk("DN: ARFR=0xF8F\n");

-			}

-			else if(priv->bUpdateARFR)

-			{

-				priv->bUpdateARFR=false;

-				write_nic_word(dev, ARFR, 0x0FFF); //set 1M ~ 54Mbps.

-//				printk("DN: ARFR=0xFFF\n");

-			}

-				

-			//

-			// When it is CCK rate, it may need to update initial gain to receive lower power packets.

-			//

-			if(MgntIsCckRate(priv->CurrentOperaRate))

-			{

-				bUpdateInitialGain = true;

-			}

-//			printk("StaRateAdaptive87SE(): Degrade Tx Rate to %d\n", priv->CurrentOperaRate);

-		}

-	}

-	else

-	{

-		if(priv->TryDownCountLowData > 0)

-			priv->TryDownCountLowData --;

-	}

-			

-	// Keep the Tx fail rate count to equal to 0x15 at most.

-	// Reduce the fail count at least to 10 sec if tx rate is tending stable.

-	if(priv->FailTxRateCount >= 0x15 || 

-		(!bTryUp && !bTryDown && priv->TryDownCountLowData == 0 && priv->TryupingCount && priv->FailTxRateCount > 0x6))

-	{

-		priv->FailTxRateCount --;

-	}		

-

-

-	OfdmTxPwrIdx  = priv->chtxpwr_ofdm[priv->ieee80211->current_network.channel]; 

-	CckTxPwrIdx  = priv->chtxpwr[priv->ieee80211->current_network.channel]; 

-	

-	//[TRC Dell Lab] Mac0x9e increase 2 level in 36M~18M situation, Isaiah 2008-02-18 24:00 

-	if((priv->CurrentOperaRate < 96) &&(priv->CurrentOperaRate > 22))

-	{

-		u1bCck = read_nic_byte(dev, CCK_TXAGC);

-		u1bOfdm = read_nic_byte(dev, OFDM_TXAGC);

-

-		// case 1: Never enter High power

-		if(u1bCck == CckTxPwrIdx )

-		{

-			if(u1bOfdm != (OfdmTxPwrIdx+2) )

-			{

-			priv->bEnhanceTxPwr= true;

-			u1bOfdm = ((u1bOfdm+2) > 35) ? 35: (u1bOfdm+2);

-			write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);

-//			printk("Enhance OFDM_TXAGC : +++++ u1bOfdm= 0x%x\n", u1bOfdm);

-			}

-		}

-		// case 2: enter high power

-		else if(u1bCck < CckTxPwrIdx)

-		{

-			if(!priv->bEnhanceTxPwr)

-			{

-				priv->bEnhanceTxPwr= true;

-				u1bOfdm = ((u1bOfdm+2) > 35) ? 35: (u1bOfdm+2);

-				write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);

-				//RT_TRACE(COMP_RATE, DBG_TRACE, ("Enhance OFDM_TXAGC(2) : +++++ u1bOfdm= 0x%x\n", u1bOfdm));

-			}

-		}

-	}

-	else if(priv->bEnhanceTxPwr)  //54/48/11/5.5/2/1

-	{

-		u1bCck = read_nic_byte(dev, CCK_TXAGC);

-		u1bOfdm = read_nic_byte(dev, OFDM_TXAGC);

-

-		// case 1: Never enter High power

-		if(u1bCck == CckTxPwrIdx )

-		{

-		priv->bEnhanceTxPwr= false;

-		write_nic_byte(dev, OFDM_TXAGC, OfdmTxPwrIdx);

-		//printk("Recover OFDM_TXAGC : ===== u1bOfdm= 0x%x\n", OfdmTxPwrIdx);

-		}

-		// case 2: enter high power

-		else if(u1bCck < CckTxPwrIdx)

-		{

-			priv->bEnhanceTxPwr= false;

-			u1bOfdm = ((u1bOfdm-2) > 0) ? (u1bOfdm-2): 0;

-			write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);

-			//RT_TRACE(COMP_RATE, DBG_TRACE, ("Recover OFDM_TXAGC(2): ===== u1bOfdm= 0x%x\n", u1bOfdm));

-

-		}

-	}

-

-	//

-	// We need update initial gain when we set tx rate "from OFDM to CCK" or

-	// "from CCK to OFDM". 

-	//

-SetInitialGain:

-	if(bUpdateInitialGain)

-	{

-		if(MgntIsCckRate(priv->CurrentOperaRate)) // CCK

-		{

-			if(priv->InitialGain > priv->RegBModeGainStage)

-			{

-				priv->InitialGainBackUp= priv->InitialGain;

-

-				if(CurrSignalStrength < -85) // Low power, OFDM [0x17] = 26.

-				{

-					//SD3 SYs suggest that CurrSignalStrength < -65, ofdm 0x17=26.

-					priv->InitialGain = priv->RegBModeGainStage;

-				}

-				else if(priv->InitialGain > priv->RegBModeGainStage + 1)

-				{

-					priv->InitialGain -= 2;

-				}

-				else

-				{

-					priv->InitialGain --;

-				}

-				printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n",priv->InitialGain, priv->CurrentOperaRate);			

-				UpdateInitialGain(dev);

-			}

-		}

-		else // OFDM

-		{			

-			if(priv->InitialGain < 4)

-			{

-				priv->InitialGainBackUp= priv->InitialGain;

-

-				priv->InitialGain ++;

-				printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n",priv->InitialGain, priv->CurrentOperaRate);			

-				UpdateInitialGain(dev);

-			}					

-		}

-	}

-

-	//Record the related info

-	priv->LastRetryRate = CurrRetryRate;

-	priv->LastTxThroughput = TxThroughput;

-	priv->ieee80211->rate = priv->CurrentOperaRate * 5;

-}

-

-#endif

-#if LINUX_VERSION_CODE >=KERNEL_VERSION(2,6,20)

-void rtl8180_rate_adapter(struct work_struct * work)

-{

-	struct delayed_work *dwork = container_of(work,struct delayed_work,work);

-        struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,rate_adapter_wq);

-        struct net_device *dev = ieee->dev;

-#else

-void rtl8180_rate_adapter(struct net_device *dev)

-{

-

-#endif

-        //struct r8180_priv *priv = ieee80211_priv(dev);

-//    DMESG("---->rtl8180_rate_adapter");

-        StaRateAdaptive87SE(dev);

-//   DMESG("<----rtl8180_rate_adapter");

-}

-void timer_rate_adaptive(unsigned long data)

-{

-	struct r8180_priv* priv = ieee80211_priv((struct net_device *)data);

-	//DMESG("---->timer_rate_adaptive()\n");

-	if(!priv->up)

-	{

-//		DMESG("<----timer_rate_adaptive():driver is not up!\n");

-		return;

-	}

-	if((priv->ieee80211->iw_mode != IW_MODE_MASTER)

-			&& (priv->ieee80211->state == IEEE80211_LINKED) &&

-			(priv->ForcedDataRate == 0) )

-	{

-//	DMESG("timer_rate_adaptive():schedule rate_adapter_wq\n");

-#ifdef CONFIG_RTL818X_S

-		queue_work(priv->ieee80211->wq, (void *)&priv->ieee80211->rate_adapter_wq);

-//		StaRateAdaptive87SE((struct net_device *)data);

-#endif

-	}

-	priv->rateadapter_timer.expires = jiffies + MSECS(priv->RateAdaptivePeriod);

-	add_timer(&priv->rateadapter_timer);

-	//DMESG("<----timer_rate_adaptive()\n");

-}

-//by amy 080312}

-void

-SwAntennaDiversityRxOk8185(

-	struct net_device *dev, 

-	u8 SignalStrength

-	)

-{

-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);

-

-//	printk("+SwAntennaDiversityRxOk8185: RxSs: %d\n", SignalStrength);

-

-	priv->AdRxOkCnt++;

-

-	if( priv->AdRxSignalStrength != -1)

-	{

-		priv->AdRxSignalStrength = ((priv->AdRxSignalStrength*7) + (SignalStrength*3)) / 10;

-	}

-	else

-	{ // Initialization case.

-		priv->AdRxSignalStrength = SignalStrength;

-	}

-//{+by amy 080312

-	if( priv->LastRxPktAntenna ) //Main antenna.	

-		priv->AdMainAntennaRxOkCnt++;	

-	else	 // Aux antenna.

-		priv->AdAuxAntennaRxOkCnt++;

-//+by amy 080312

-//	printk("-SwAntennaDiversityRxOk8185: AdRxOkCnt: %d AdRxSignalStrength: %d\n", priv->AdRxOkCnt, priv->AdRxSignalStrength);

-}

-//

-//	Description:

-//		Change Antenna Switch.

-//

-bool

-SetAntenna8185(

-	struct net_device *dev,

-	u8		u1bAntennaIndex

-	)

-{

-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);

-	bool bAntennaSwitched = false;

-

-//	printk("+SetAntenna8185(): Antenna is switching to: %d \n", u1bAntennaIndex);

-

-	switch(u1bAntennaIndex)

-	{

-	case 0:

-		switch(priv->rf_chip)

-		{

-		case RF_ZEBRA2:

-		case RF_ZEBRA4:

-#ifdef CONFIG_RTL8185B

-#ifdef CONFIG_RTL818X_S

-			// Mac register, main antenna

-			write_nic_byte(dev, ANTSEL, 0x03); 

-			//base band

-			write_phy_cck(dev,0x11, 0x9b); // Config CCK RX antenna.

-			write_phy_ofdm(dev, 0x0d, 0x5c); // Config OFDM RX antenna.

-

-#else

-			// Mac register, main antenna

-			write_nic_byte(dev, ANTSEL, 0x03); 

-			//base band

-			write_phy_cck(dev, 0x10, 0x9b); // Config CCK RX antenna.

-			write_phy_ofdm(dev, 0x0d, 0x5c); // Config OFDM RX antenna.

-#endif

-#endif

-

-			bAntennaSwitched = true;

-			break;

-

-		default:

-			printk("SetAntenna8185: unkown RFChipID(%d)\n", priv->rf_chip);

-			break;

-		}

-		break;

-

-	case 1:

-		switch(priv->rf_chip)

-		{

-		case RF_ZEBRA2:

-		case RF_ZEBRA4:

-#ifdef CONFIG_RTL8185B

-#ifdef CONFIG_RTL818X_S

-			// Mac register, aux antenna

-			write_nic_byte(dev, ANTSEL, 0x00); 

-			//base band

-			write_phy_cck(dev, 0x11, 0xbb); // Config CCK RX antenna.

-			write_phy_ofdm(dev, 0x0d, 0x54); // Config OFDM RX antenna.

-#else

-			// Mac register, aux antenna

-			write_nic_byte(dev, ANTSEL, 0x00); 

-			//base band

-			write_phy_cck(dev, 0x10, 0xbb); // Config CCK RX antenna.

-			write_phy_ofdm(dev, 0x0d, 0x54); // Config OFDM RX antenna.

-#endif

-#endif

-

-			bAntennaSwitched = true;

-			break;

-

-		default:

-			printk("SetAntenna8185: unkown RFChipID(%d)\n", priv->rf_chip);

-			break;

-		}

-		break;

-

-	default:

-		printk("SetAntenna8185: unkown u1bAntennaIndex(%d)\n", u1bAntennaIndex);

-		break;

-	}

-

-	if(bAntennaSwitched)

-	{

-		priv->CurrAntennaIndex = u1bAntennaIndex;

-	}

-

-//	printk("-SetAntenna8185(): return (%#X)\n", bAntennaSwitched);

-

-	return bAntennaSwitched;

-}

-//

-//	Description:

-//		Toggle Antenna switch.

-//

-bool

-SwitchAntenna(

-	struct net_device *dev

-	)

-{

-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);

-

-	bool		bResult;

-

-	if(priv->CurrAntennaIndex == 0)

-	{

-#if 0//lzm del 080826

-//by amy 080312

-#ifdef CONFIG_RTL818X_S

-		if(priv->bSwAntennaDiverity)

-			bResult = SetAntennaConfig87SE(dev, 1, true);

-		else			

-#endif

-#endif

-			bResult = SetAntenna8185(dev, 1);

-//by amy 080312

-//		printk("SwitchAntenna(): switching to antenna 1 ......\n");

-//		bResult = SetAntenna8185(dev, 1);//-by amy 080312

-	}

-	else

-	{

-#if 0//lzm del 080826

-//by amy 080312

-#ifdef CONFIG_RTL818X_S

-		if(priv->bSwAntennaDiverity)

-			bResult = SetAntennaConfig87SE(dev, 0, true);

-		else	

-#endif

-#endif

-			bResult = SetAntenna8185(dev, 0);

-//by amy 080312

-//		printk("SwitchAntenna(): switching to antenna 0 ......\n");

-//		bResult = SetAntenna8185(dev, 0);//-by amy 080312

-	}

-

-	return bResult;

-}

-//

-//	Description:

-//		Engine of SW Antenna Diversity mechanism.

-//		Since 8187 has no Tx part information, 

-//		this implementation is only dependend on Rx part information. 

-//

-//	2006.04.17, by rcnjko.

-//

-void

-SwAntennaDiversity(

-	struct net_device *dev

-	)

-{

-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);

-	bool   bSwCheckSS=false;

-//	printk("+SwAntennaDiversity(): CurrAntennaIndex: %d\n", priv->CurrAntennaIndex);

-//	printk("AdTickCount is %d\n",priv->AdTickCount);

-//by amy 080312

-	if(bSwCheckSS)

-	{

-		priv->AdTickCount++;

-	

-		printk("(1) AdTickCount: %d, AdCheckPeriod: %d\n", 

-			priv->AdTickCount, priv->AdCheckPeriod);

-		printk("(2) AdRxSignalStrength: %ld, AdRxSsThreshold: %ld\n", 

-			priv->AdRxSignalStrength, priv->AdRxSsThreshold);

-	}

-//	priv->AdTickCount++;//-by amy 080312

-	

-	// Case 1. No Link.

-	if(priv->ieee80211->state != IEEE80211_LINKED)

-	{

-	//	printk("SwAntennaDiversity(): Case 1. No Link.\n");

-

-		priv->bAdSwitchedChecking = false;

-		// I switch antenna here to prevent any one of antenna is broken before link established, 2006.04.18, by rcnjko..

-		SwitchAntenna(dev);

-	}

-	// Case 2. Linked but no packet received.

-	else if(priv->AdRxOkCnt == 0)

-	{

-	//	printk("SwAntennaDiversity(): Case 2. Linked but no packet received.\n");

-

-		priv->bAdSwitchedChecking = false;

-		SwitchAntenna(dev);

-	}

-	// Case 3. Evaluate last antenna switch action and undo it if necessary.

-	else if(priv->bAdSwitchedChecking == true)

-	{

-	//	printk("SwAntennaDiversity(): Case 3. Evaluate last antenna switch action.\n");

-

-		priv->bAdSwitchedChecking = false;

-

-		// Adjust Rx signal strength threashold.

-		priv->AdRxSsThreshold = (priv->AdRxSignalStrength + priv->AdRxSsBeforeSwitched) / 2;

-

-		priv->AdRxSsThreshold = (priv->AdRxSsThreshold > priv->AdMaxRxSsThreshold) ?	

-					priv->AdMaxRxSsThreshold: priv->AdRxSsThreshold;

-		if(priv->AdRxSignalStrength < priv->AdRxSsBeforeSwitched)

-		{ // Rx signal strength is not improved after we swtiched antenna. => Swich back.

-//			printk("SwAntennaDiversity(): Rx Signal Strength is not improved, CurrRxSs: %d, LastRxSs: %d\n", 

-//				priv->AdRxSignalStrength, priv->AdRxSsBeforeSwitched);

-//by amy 080312

-			// Increase Antenna Diversity checking period due to bad decision.

-			priv->AdCheckPeriod *= 2;

-//by amy 080312

-			// Increase Antenna Diversity checking period.

-			if(priv->AdCheckPeriod > priv->AdMaxCheckPeriod)

-				priv->AdCheckPeriod = priv->AdMaxCheckPeriod;

-	

-			// Wrong deceision => switch back.

-			SwitchAntenna(dev);

-		}

-		else

-		{ // Rx Signal Strength is improved. 

-//			printk("SwAntennaDiversity(): Rx Signal Strength is improved, CurrRxSs: %d, LastRxSs: %d\n", 

-//				priv->AdRxSignalStrength, priv->AdRxSsBeforeSwitched);

-

-			// Reset Antenna Diversity checking period to its min value.

-			priv->AdCheckPeriod = priv->AdMinCheckPeriod;

-		}

-

-//		printk("SwAntennaDiversity(): AdRxSsThreshold: %d, AdCheckPeriod: %d\n",

-//			priv->AdRxSsThreshold, priv->AdCheckPeriod);

-	}

-	// Case 4. Evaluate if we shall switch antenna now.

-	// Cause Table Speed is very fast in TRC Dell Lab, we check it every time. 

-	else// if(priv->AdTickCount >= priv->AdCheckPeriod)//-by amy 080312

-	{

-//		printk("SwAntennaDiversity(): Case 4. Evaluate if we shall switch antenna now.\n");

-

-		priv->AdTickCount = 0;

-

-		//

-		// <Roger_Notes> We evaluate RxOk counts for each antenna first and than 

-		// evaluate signal strength. 

-		// The following operation can overcome the disability of CCA on both two antennas

-		// When signal strength was extremely low or high.

-		// 2008.01.30.

-		// 

-		

-		//

-		// Evaluate RxOk count from each antenna if we shall switch default antenna now.

-		// Added by Roger, 2008.02.21.

-//{by amy 080312

-		if((priv->AdMainAntennaRxOkCnt < priv->AdAuxAntennaRxOkCnt) 

-			&& (priv->CurrAntennaIndex == 0))

-		{ // We set Main antenna as default but RxOk count was less than Aux ones.

-

-	//		printk("SwAntennaDiversity(): Main antenna RxOK is poor, AdMainAntennaRxOkCnt: %d, AdAuxAntennaRxOkCnt: %d\n", 

-	//			priv->AdMainAntennaRxOkCnt, priv->AdAuxAntennaRxOkCnt);

-			

-			// Switch to Aux antenna.

-			SwitchAntenna(dev);	

-			priv->bHWAdSwitched = true;

-		}

-		else if((priv->AdAuxAntennaRxOkCnt < priv->AdMainAntennaRxOkCnt) 

-			&& (priv->CurrAntennaIndex == 1))

-		{ // We set Aux antenna as default but RxOk count was less than Main ones.

-

-	//		printk("SwAntennaDiversity(): Aux antenna RxOK is poor, AdMainAntennaRxOkCnt: %d, AdAuxAntennaRxOkCnt: %d\n", 

-	//			priv->AdMainAntennaRxOkCnt, priv->AdAuxAntennaRxOkCnt);

-			

-			// Switch to Main antenna.

-			SwitchAntenna(dev);

-			priv->bHWAdSwitched = true;

-		}

-		else

-		{// Default antenna is better.

-

-	//		printk("SwAntennaDiversity(): Default antenna is better., AdMainAntennaRxOkCnt: %d, AdAuxAntennaRxOkCnt: %d\n", 

-	//			priv->AdMainAntennaRxOkCnt, priv->AdAuxAntennaRxOkCnt);

-

-			// Still need to check current signal strength.

-			priv->bHWAdSwitched = false;	

-		}

-		//

-		// <Roger_Notes> We evaluate Rx signal strength ONLY when default antenna 

-		// didn't changed by HW evaluation. 

-		// 2008.02.27.

-		//

-		// [TRC Dell Lab] SignalStrength is inaccuracy. Isaiah 2008-03-05 

-		// For example, Throughput of aux is better than main antenna(about 10M v.s 2M), 

-		// but AdRxSignalStrength is less than main. 

-		// Our guess is that main antenna have lower throughput and get many change 

-		// to receive more CCK packets(ex.Beacon) which have stronger SignalStrength.

-		//

-		if( (!priv->bHWAdSwitched) && (bSwCheckSS))

-		{

-//by amy 080312}

-		// Evaluate Rx signal strength if we shall switch antenna now.

-		if(priv->AdRxSignalStrength < priv->AdRxSsThreshold)

-		{ // Rx signal strength is weak => Switch Antenna.

-//			printk("SwAntennaDiversity(): Rx Signal Strength is weak, CurrRxSs: %d, RxSsThreshold: %d\n", 

-//				priv->AdRxSignalStrength, priv->AdRxSsThreshold);	

-

-			priv->AdRxSsBeforeSwitched = priv->AdRxSignalStrength; 

-			priv->bAdSwitchedChecking = true;

-

-			SwitchAntenna(dev);

-		}

-		else

-		{ // Rx signal strength is OK. 

-//			printk("SwAntennaDiversity(): Rx Signal Strength is OK, CurrRxSs: %d, RxSsThreshold: %d\n", 

-//				priv->AdRxSignalStrength, priv->AdRxSsThreshold);

-

-			priv->bAdSwitchedChecking = false;

-			// Increase Rx signal strength threashold if necessary.

-			if(	(priv->AdRxSignalStrength > (priv->AdRxSsThreshold + 10)) && // Signal is much stronger than current threshold

-				priv->AdRxSsThreshold <= priv->AdMaxRxSsThreshold) // Current threhold is not yet reach upper limit.

-			{

-				priv->AdRxSsThreshold = (priv->AdRxSsThreshold + priv->AdRxSignalStrength) / 2;

-				priv->AdRxSsThreshold = (priv->AdRxSsThreshold > priv->AdMaxRxSsThreshold) ?

-												priv->AdMaxRxSsThreshold: priv->AdRxSsThreshold;//+by amy 080312

-			}

-

-			// Reduce Antenna Diversity checking period if possible. 

-			if( priv->AdCheckPeriod > priv->AdMinCheckPeriod )

-			{

-				priv->AdCheckPeriod /= 2; 

-			}

-		}

-		}

-	}

-//by amy 080312

-	// Reset antenna diversity Rx related statistics.

-	priv->AdRxOkCnt = 0;

-	priv->AdMainAntennaRxOkCnt = 0;

-	priv->AdAuxAntennaRxOkCnt = 0;

-//by amy 080312

-

-//	priv->AdRxOkCnt = 0;//-by amy 080312

-

-//	printk("-SwAntennaDiversity()\n");

-}

-

-//

-//	Description:

-//		Return TRUE if we shall perform Tx Power Tracking Mecahnism, FALSE otherwise.	

-//

-bool

-CheckTxPwrTracking(	struct net_device *dev)

-{

-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);

-

-	if(!priv->bTxPowerTrack)

-	{

-		return false;

-	}

-

-//lzm reserved 080826

-	//if(priv->bScanInProgress)

-	//{

-	//	return false;

-	//}

-

-	//if 87SE is in High Power , don't do Tx Power Tracking. asked by SD3 ED. 2008-08-08 Isaiah 

-	if(priv->bToUpdateTxPwr)

-	{

-		return false;

-	}

-		

-	return true;

-}

-

-

-//

-//	Description:

-//		Timer callback function of SW Antenna Diversity.

-//

-void

-SwAntennaDiversityTimerCallback(

-	struct net_device *dev

-	)

-{

-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);

-	RT_RF_POWER_STATE rtState;

-	

-	//printk("+SwAntennaDiversityTimerCallback()\n");

-

-	//

-	// We do NOT need to switch antenna while RF is off.

-	// 2007.05.09, added by Roger.

-	//

-	rtState = priv->eRFPowerState;

-	do{

-		if (rtState == eRfOff)

-		{	

-//			printk("SwAntennaDiversityTimer - RF is OFF.\n");

-			break;

-		}  	

-		else if (rtState == eRfSleep)

-		{	

-			// Don't access BB/RF under Disable PLL situation.

-			//RT_TRACE((COMP_RF|COMP_ANTENNA), DBG_LOUD, ("SwAntennaDiversityTimerCallback(): RF is Sleep => skip it\n"));

-			break;

-		}  

-		SwAntennaDiversity(dev);

-

-	}while(false);

-

-	if(priv->up)

-	{

-		priv->SwAntennaDiversityTimer.expires = jiffies + MSECS(ANTENNA_DIVERSITY_TIMER_PERIOD);

-		add_timer(&priv->SwAntennaDiversityTimer);

-	}

-

-	//printk("-SwAntennaDiversityTimerCallback()\n");

-}

-

+//#include "r8180.h"
+#include "r8180_dm.h"
+#include "r8180_hw.h"
+#include "r8180_93cx6.h"
+//{by amy 080312
+
+//
+//	Description:
+//		Return TRUE if we shall perform High Power Mecahnism, FALSE otherwise.
+//
+//+by amy 080312
+#define RATE_ADAPTIVE_TIMER_PERIOD      300
+
+bool CheckHighPower(struct net_device *dev)
+{
+	struct r8180_priv *priv = ieee80211_priv(dev);
+	struct ieee80211_device *ieee = priv->ieee80211;
+
+	if(!priv->bRegHighPowerMechanism)
+	{
+		return false;
+	}
+
+	if(ieee->state == IEEE80211_LINKED_SCANNING)
+	{
+		return false;
+	}
+
+	return true;
+}
+
+//
+//	Description:
+//		Update Tx power level if necessary.
+//		See also DoRxHighPower() and SetTxPowerLevel8185() for reference.
+//
+//	Note:
+//		The reason why we udpate Tx power level here instead of DoRxHighPower()
+//		is the number of IO to change Tx power is much more than chane TR switch
+//		and they are related to OFDM and MAC registers.
+//		So, we don't want to update it so frequently in per-Rx packet base.
+//
+void
+DoTxHighPower(
+	struct net_device *dev
+	)
+{
+	struct r8180_priv *priv = ieee80211_priv(dev);
+	u16			HiPwrUpperTh = 0;
+	u16			HiPwrLowerTh = 0;
+	u8			RSSIHiPwrUpperTh;
+	u8			RSSIHiPwrLowerTh;
+	u8			u1bTmp;
+	char			OfdmTxPwrIdx, CckTxPwrIdx;
+
+	//printk("----> DoTxHighPower()\n");
+
+	HiPwrUpperTh = priv->RegHiPwrUpperTh;
+	HiPwrLowerTh = priv->RegHiPwrLowerTh;
+
+	HiPwrUpperTh = HiPwrUpperTh * 10;
+	HiPwrLowerTh = HiPwrLowerTh * 10;
+	RSSIHiPwrUpperTh = priv->RegRSSIHiPwrUpperTh;
+	RSSIHiPwrLowerTh = priv->RegRSSIHiPwrLowerTh;
+
+	//lzm add 080826
+	OfdmTxPwrIdx  = priv->chtxpwr_ofdm[priv->ieee80211->current_network.channel];
+	CckTxPwrIdx  = priv->chtxpwr[priv->ieee80211->current_network.channel];
+
+	//	printk("DoTxHighPower() - UndecoratedSmoothedSS:%d, CurCCKRSSI = %d , bCurCCKPkt= %d \n", priv->UndecoratedSmoothedSS, priv->CurCCKRSSI, priv->bCurCCKPkt );
+
+	if((priv->UndecoratedSmoothedSS > HiPwrUpperTh) ||
+		(priv->bCurCCKPkt && (priv->CurCCKRSSI > RSSIHiPwrUpperTh)))
+	{
+		// Stevenl suggested that degrade 8dbm in high power sate. 2007-12-04 Isaiah
+
+	//	printk("=====>DoTxHighPower() - High Power - UndecoratedSmoothedSS:%d,  HiPwrUpperTh = %d \n", priv->UndecoratedSmoothedSS, HiPwrUpperTh );
+		priv->bToUpdateTxPwr = true;
+		u1bTmp= read_nic_byte(dev, CCK_TXAGC);
+
+		// If it never enter High Power.
+		if( CckTxPwrIdx == u1bTmp)
+		{
+		u1bTmp = (u1bTmp > 16) ? (u1bTmp -16): 0;  // 8dbm
+		write_nic_byte(dev, CCK_TXAGC, u1bTmp);
+
+		u1bTmp= read_nic_byte(dev, OFDM_TXAGC);
+		u1bTmp = (u1bTmp > 16) ? (u1bTmp -16): 0;  // 8dbm
+		write_nic_byte(dev, OFDM_TXAGC, u1bTmp);
+		}
+
+	}
+	else if((priv->UndecoratedSmoothedSS < HiPwrLowerTh) &&
+		(!priv->bCurCCKPkt || priv->CurCCKRSSI < RSSIHiPwrLowerTh))
+	{
+	//	 printk("DoTxHighPower() - lower Power - UndecoratedSmoothedSS:%d,  HiPwrUpperTh = %d \n", priv->UndecoratedSmoothedSS, HiPwrLowerTh );
+		if(priv->bToUpdateTxPwr)
+		{
+			priv->bToUpdateTxPwr = false;
+			//SD3 required.
+			u1bTmp= read_nic_byte(dev, CCK_TXAGC);
+			if(u1bTmp < CckTxPwrIdx)
+			{
+			//u1bTmp = ((u1bTmp+16) > 35) ? 35: (u1bTmp+16);  // 8dbm
+			//write_nic_byte(dev, CCK_TXAGC, u1bTmp);
+			write_nic_byte(dev, CCK_TXAGC, CckTxPwrIdx);
+			}
+
+			u1bTmp= read_nic_byte(dev, OFDM_TXAGC);
+			if(u1bTmp < OfdmTxPwrIdx)
+			{
+			//u1bTmp = ((u1bTmp+16) > 35) ? 35: (u1bTmp+16);  // 8dbm
+			//write_nic_byte(dev, OFDM_TXAGC, u1bTmp);
+			write_nic_byte(dev, OFDM_TXAGC, OfdmTxPwrIdx);
+			}
+		}
+	}
+
+	//printk("<---- DoTxHighPower()\n");
+}
+
+
+//
+//	Description:
+//		Callback function of UpdateTxPowerWorkItem.
+//		Because of some event happend, e.g. CCX TPC, High Power Mechanism,
+//		We update Tx power of current channel again.
+//
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+void rtl8180_tx_pw_wq (struct work_struct *work)
+{
+//      struct r8180_priv *priv = container_of(work, struct r8180_priv, watch_dog_wq);
+//      struct ieee80211_device * ieee = (struct ieee80211_device*)
+//                                             container_of(work, struct ieee80211_device, watch_dog_wq);
+        struct delayed_work *dwork = container_of(work,struct delayed_work,work);
+        struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,tx_pw_wq);
+        struct net_device *dev = ieee->dev;
+#else
+void rtl8180_tx_pw_wq(struct net_device *dev)
+{
+	// struct r8180_priv *priv = ieee80211_priv(dev);
+#endif
+
+//	printk("----> UpdateTxPowerWorkItemCallback()\n");
+
+	DoTxHighPower(dev);
+
+//	printk("<---- UpdateTxPowerWorkItemCallback()\n");
+}
+
+
+//
+//	Description:
+//		Return TRUE if we shall perform DIG Mecahnism, FALSE otherwise.
+//
+bool
+CheckDig(
+	struct net_device *dev
+	)
+{
+	struct r8180_priv *priv = ieee80211_priv(dev);
+	struct ieee80211_device *ieee = priv->ieee80211;
+
+	if(!priv->bDigMechanism)
+		return false;
+
+	if(ieee->state != IEEE80211_LINKED)
+		return false;
+
+	//if(priv->CurrentOperaRate < 36) // Schedule Dig under all OFDM rates. By Bruce, 2007-06-01.
+	if((priv->ieee80211->rate/5) < 36) // Schedule Dig under all OFDM rates. By Bruce, 2007-06-01.
+		return false;
+	return true;
+}
+//
+//	Description:
+//		Implementation of DIG for Zebra and Zebra2.
+//
+void
+DIG_Zebra(
+	struct net_device *dev
+	)
+{
+	struct r8180_priv *priv = ieee80211_priv(dev);
+	u16			CCKFalseAlarm, OFDMFalseAlarm;
+	u16			OfdmFA1, OfdmFA2;
+	int			InitialGainStep = 7; // The number of initial gain stages.
+	int			LowestGainStage = 4; // The capable lowest stage of performing dig workitem.
+	u32 			AwakePeriodIn2Sec=0;
+
+	//printk("---------> DIG_Zebra()\n");
+
+	CCKFalseAlarm = (u16)(priv->FalseAlarmRegValue & 0x0000ffff);
+	OFDMFalseAlarm = (u16)((priv->FalseAlarmRegValue >> 16) & 0x0000ffff);
+	OfdmFA1 =  0x15;
+	OfdmFA2 = ((u16)(priv->RegDigOfdmFaUpTh)) << 8;
+
+//	printk("DIG**********CCK False Alarm: %#X \n",CCKFalseAlarm);
+//	printk("DIG**********OFDM False Alarm: %#X \n",OFDMFalseAlarm);
+
+        // The number of initial gain steps is different, by Bruce, 2007-04-13.
+	if (priv->InitialGain == 0 ) //autoDIG
+	{ // Advised from SD3 DZ
+		priv->InitialGain = 4; // In 87B, m74dBm means State 4 (m82dBm)
+	}
+	//if(pHalData->VersionID != VERSION_8187B_B)
+	{ // Advised from SD3 DZ
+		OfdmFA1 =  0x20;
+	}
+
+#if 1 //lzm reserved 080826
+	AwakePeriodIn2Sec = (2000-priv ->DozePeriodInPast2Sec);
+	//printk("&&& DozePeriod=%d AwakePeriod=%d\n", priv->DozePeriodInPast2Sec, AwakePeriodIn2Sec);
+	priv ->DozePeriodInPast2Sec=0;
+
+	if(AwakePeriodIn2Sec)
+	{
+		//RT_TRACE(COMP_DIG, DBG_TRACE, ("DIG: AwakePeriodIn2Sec(%d) - FATh(0x%X , 0x%X) ->",AwakePeriodIn2Sec, OfdmFA1, OfdmFA2));
+		// adjuest DIG threshold.
+		OfdmFA1 =  (u16)((OfdmFA1*AwakePeriodIn2Sec)  / 2000) ;
+		OfdmFA2 =  (u16)((OfdmFA2*AwakePeriodIn2Sec)  / 2000) ;
+		//RT_TRACE(COMP_DIG, DBG_TRACE, ("( 0x%X , 0x%X)\n", OfdmFA1, OfdmFA2));
+	}
+	else
+	{
+		;//RT_TRACE(COMP_DIG, DBG_WARNING, ("ERROR!!  AwakePeriodIn2Sec should not be ZERO!!\n"));
+	}
+#endif
+
+	InitialGainStep = 8;
+	LowestGainStage = priv->RegBModeGainStage; // Lowest gain stage.
+
+	if (OFDMFalseAlarm > OfdmFA1)
+	{
+		if (OFDMFalseAlarm > OfdmFA2)
+		{
+			priv->DIG_NumberFallbackVote++;
+			if (priv->DIG_NumberFallbackVote >1)
+			{
+				//serious OFDM  False Alarm, need fallback
+				if (priv->InitialGain < InitialGainStep)
+				{
+					priv->InitialGainBackUp= priv->InitialGain;
+
+					priv->InitialGain = (priv->InitialGain + 1);
+//					printk("DIG**********OFDM False Alarm: %#X,  OfdmFA1: %#X, OfdmFA2: %#X\n", OFDMFalseAlarm, OfdmFA1, OfdmFA2);
+//					printk("DIG+++++++ fallback OFDM:%d \n", priv->InitialGain);
+					UpdateInitialGain(dev);
+				}
+				priv->DIG_NumberFallbackVote = 0;
+				priv->DIG_NumberUpgradeVote=0;
+			}
+		}
+		else
+		{
+			if (priv->DIG_NumberFallbackVote)
+				priv->DIG_NumberFallbackVote--;
+		}
+		priv->DIG_NumberUpgradeVote=0;
+	}
+	else
+	{
+		if (priv->DIG_NumberFallbackVote)
+			priv->DIG_NumberFallbackVote--;
+		priv->DIG_NumberUpgradeVote++;
+
+		if (priv->DIG_NumberUpgradeVote>9)
+		{
+			if (priv->InitialGain > LowestGainStage) // In 87B, m78dBm means State 4 (m864dBm)
+			{
+				priv->InitialGainBackUp= priv->InitialGain;
+
+				priv->InitialGain = (priv->InitialGain - 1);
+//				printk("DIG**********OFDM False Alarm: %#X,  OfdmFA1: %#X, OfdmFA2: %#X\n", OFDMFalseAlarm, OfdmFA1, OfdmFA2);
+//				printk("DIG--------- Upgrade OFDM:%d \n", priv->InitialGain);
+				UpdateInitialGain(dev);
+			}
+			priv->DIG_NumberFallbackVote = 0;
+			priv->DIG_NumberUpgradeVote=0;
+		}
+	}
+
+//	printk("DIG+++++++ OFDM:%d\n", priv->InitialGain);
+	//printk("<--------- DIG_Zebra()\n");
+}
+
+//
+//	Description:
+//		Dispatch DIG implementation according to RF.
+//
+void
+DynamicInitGain(
+	struct net_device *dev
+	)
+{
+	struct r8180_priv *priv = ieee80211_priv(dev);
+
+	switch(priv->rf_chip)
+	{
+		case RF_ZEBRA2:  // [AnnieWorkaround] For Zebra2, 2005-08-01.
+		case RF_ZEBRA4:
+			DIG_Zebra( dev );
+			break;
+
+		default:
+			printk("DynamicInitGain(): unknown RFChipID(%d) !!!\n", priv->rf_chip);
+			break;
+	}
+}
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+void rtl8180_hw_dig_wq (struct work_struct *work)
+{
+//      struct r8180_priv *priv = container_of(work, struct r8180_priv, watch_dog_wq);
+//      struct ieee80211_device * ieee = (struct ieee80211_device*)
+//                                             container_of(work, struct ieee80211_device, watch_dog_wq);
+        struct delayed_work *dwork = container_of(work,struct delayed_work,work);
+        struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,hw_dig_wq);
+        struct net_device *dev = ieee->dev;
+#else
+void rtl8180_hw_dig_wq(struct net_device *dev)
+{
+
+#endif
+	struct r8180_priv *priv = ieee80211_priv(dev);
+
+	// Read CCK and OFDM False Alarm.
+	priv->FalseAlarmRegValue = read_nic_dword(dev, CCK_FALSE_ALARM);
+
+
+	// Adjust Initial Gain dynamically.
+	DynamicInitGain(dev);
+
+}
+
+int
+IncludedInSupportedRates(
+        struct r8180_priv       *priv,
+        u8              TxRate  )
+{
+    u8 rate_len;
+        u8 rate_ex_len;
+        u8                      RateMask = 0x7F;
+        u8                      idx;
+        unsigned short          Found = 0;
+        u8                      NaiveTxRate = TxRate&RateMask;
+
+    rate_len = priv->ieee80211->current_network.rates_len;
+        rate_ex_len = priv->ieee80211->current_network.rates_ex_len;
+        for( idx=0; idx< rate_len; idx++ )
+        {
+                if( (priv->ieee80211->current_network.rates[idx] & RateMask) == NaiveTxRate )
+                {
+                        Found = 1;
+                        goto found_rate;
+                }
+        }
+    for( idx=0; idx< rate_ex_len; idx++ )
+        {
+                if( (priv->ieee80211->current_network.rates_ex[idx] & RateMask) == NaiveTxRate )
+                {
+                        Found = 1;
+                        goto found_rate;
+                }
+        }
+        return Found;
+        found_rate:
+        return Found;
+}
+
+//
+//      Description:
+//              Get the Tx rate one degree up form the input rate in the supported rates.
+//              Return the upgrade rate if it is successed, otherwise return the input rate.
+//      By Bruce, 2007-06-05.
+//
+u8
+GetUpgradeTxRate(
+        struct net_device *dev,
+        u8                              rate
+        )
+{
+        struct r8180_priv *priv = ieee80211_priv(dev);
+        u8                      UpRate;
+
+        // Upgrade 1 degree.
+        switch(rate)
+        {
+        case 108: // Up to 54Mbps.
+                UpRate = 108;
+                break;
+
+        case 96: // Up to 54Mbps.
+                UpRate = 108;
+                break;
+
+        case 72: // Up to 48Mbps.
+                UpRate = 96;
+                break;
+
+        case 48: // Up to 36Mbps.
+                UpRate = 72;
+                break;
+
+        case 36: // Up to 24Mbps.
+                UpRate = 48;
+                break;
+
+        case 22: // Up to 18Mbps.
+                UpRate = 36;
+                break;
+
+        case 11: // Up to 11Mbps.
+                UpRate = 22;
+                break;
+
+        case 4: // Up to 5.5Mbps.
+                UpRate = 11;
+                break;
+
+        case 2: // Up to 2Mbps.
+                UpRate = 4;
+                break;
+
+        default:
+                printk("GetUpgradeTxRate(): Input Tx Rate(%d) is undefined!\n", rate);
+                return rate;
+        }
+        // Check if the rate is valid.
+        if(IncludedInSupportedRates(priv, UpRate))
+        {
+//              printk("GetUpgradeTxRate(): GetUpgrade Tx rate(%d) from %d !\n", UpRate, priv->CurrentOperaRate);
+                return UpRate;
+        }
+        else
+        {
+                //printk("GetUpgradeTxRate(): Tx rate (%d) is not in supported rates\n", UpRate);
+                return rate;
+        }
+        return rate;
+}
+//
+//      Description:
+//              Get the Tx rate one degree down form the input rate in the supported rates.
+//              Return the degrade rate if it is successed, otherwise return the input rate.
+//      By Bruce, 2007-06-05.
+//
+u8
+GetDegradeTxRate(
+        struct net_device *dev,
+        u8         rate
+        )
+{
+        struct r8180_priv *priv = ieee80211_priv(dev);
+        u8                      DownRate;
+
+        // Upgrade 1 degree.
+        switch(rate)
+        {
+        case 108: // Down to 48Mbps.
+                DownRate = 96;
+                break;
+
+        case 96: // Down to 36Mbps.
+                DownRate = 72;
+                break;
+
+        case 72: // Down to 24Mbps.
+                DownRate = 48;
+                break;
+
+        case 48: // Down to 18Mbps.
+                DownRate = 36;
+                break;
+
+        case 36: // Down to 11Mbps.
+                DownRate = 22;
+                break;
+
+        case 22: // Down to 5.5Mbps.
+                DownRate = 11;
+                break;
+
+        case 11: // Down to 2Mbps.
+                DownRate = 4;
+                break;
+
+        case 4: // Down to 1Mbps.
+                DownRate = 2;
+                break;
+
+        case 2: // Down to 1Mbps.
+                DownRate = 2;
+                break;
+
+        default:
+                printk("GetDegradeTxRate(): Input Tx Rate(%d) is undefined!\n", rate);
+                return rate;
+        }
+        // Check if the rate is valid.
+        if(IncludedInSupportedRates(priv, DownRate))
+        {
+//              printk("GetDegradeTxRate(): GetDegrade Tx rate(%d) from %d!\n", DownRate, priv->CurrentOperaRate);
+                return DownRate;
+        }
+        else
+        {
+                //printk("GetDegradeTxRate(): Tx rate (%d) is not in supported rates\n", DownRate);
+                return rate;
+        }
+        return rate;
+}
+//
+//      Helper function to determine if specified data rate is
+//      CCK rate.
+//      2005.01.25, by rcnjko.
+//
+bool
+MgntIsCckRate(
+        u16     rate
+        )
+{
+        bool bReturn = false;
+
+        if((rate <= 22) && (rate != 12) && (rate != 18))
+        {
+                bReturn = true;
+        }
+
+        return bReturn;
+}
+#ifdef CONFIG_RTL818X_S
+//
+//	Description:
+//		Tx Power tracking mechanism routine on 87SE.
+// 	Created by Roger, 2007.12.11.
+//
+void
+TxPwrTracking87SE(
+	struct net_device *dev
+)
+{
+	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+	u8	tmpu1Byte, CurrentThermal, Idx;
+	char	CckTxPwrIdx, OfdmTxPwrIdx;
+	//u32	u4bRfReg;
+
+	tmpu1Byte = read_nic_byte(dev, EN_LPF_CAL);
+	CurrentThermal = (tmpu1Byte & 0xf0)>>4; //[ 7:4]: thermal meter indication.
+	CurrentThermal = (CurrentThermal>0x0c)? 0x0c:CurrentThermal;//lzm add 080826
+
+	//printk("TxPwrTracking87SE(): CurrentThermal(%d)\n", CurrentThermal);
+
+	if( CurrentThermal != priv->ThermalMeter)
+	{
+//		printk("TxPwrTracking87SE(): Thermal meter changed!!!\n");
+
+		// Update Tx Power level on each channel.
+		for(Idx = 1; Idx<15; Idx++)
+		{
+			CckTxPwrIdx = priv->chtxpwr[Idx];
+			OfdmTxPwrIdx = priv->chtxpwr_ofdm[Idx];
+
+			if( CurrentThermal > priv->ThermalMeter )
+			{ // higher thermal meter.
+				CckTxPwrIdx += (CurrentThermal - priv->ThermalMeter)*2;
+				OfdmTxPwrIdx += (CurrentThermal - priv->ThermalMeter)*2;
+
+				if(CckTxPwrIdx >35)
+					CckTxPwrIdx = 35; // Force TxPower to maximal index.
+				if(OfdmTxPwrIdx >35)
+					OfdmTxPwrIdx = 35;
+			}
+			else
+			{ // lower thermal meter.
+				CckTxPwrIdx -= (priv->ThermalMeter - CurrentThermal)*2;
+				OfdmTxPwrIdx -= (priv->ThermalMeter - CurrentThermal)*2;
+
+				if(CckTxPwrIdx <0)
+					CckTxPwrIdx = 0;
+				if(OfdmTxPwrIdx <0)
+					OfdmTxPwrIdx = 0;
+			}
+
+			// Update TxPower level on CCK and OFDM resp.
+			priv->chtxpwr[Idx] = CckTxPwrIdx;
+			priv->chtxpwr_ofdm[Idx] = OfdmTxPwrIdx;
+		}
+
+		// Update TxPower level immediately.
+		rtl8225z2_SetTXPowerLevel(dev, priv->ieee80211->current_network.channel);
+	}
+	priv->ThermalMeter = CurrentThermal;
+}
+void
+StaRateAdaptive87SE(
+	struct net_device *dev
+	)
+{
+	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+	unsigned long 			CurrTxokCnt;
+	u16			CurrRetryCnt;
+	u16			CurrRetryRate;
+	//u16			i,idx;
+	unsigned long       	CurrRxokCnt;
+	bool			bTryUp = false;
+	bool			bTryDown = false;
+	u8			TryUpTh = 1;
+	u8			TryDownTh = 2;
+	u32			TxThroughput;
+	long		CurrSignalStrength;
+	bool		bUpdateInitialGain = false;
+    	u8			u1bOfdm=0, u1bCck = 0;
+	char		OfdmTxPwrIdx, CckTxPwrIdx;
+
+	priv->RateAdaptivePeriod= RATE_ADAPTIVE_TIMER_PERIOD;
+
+
+	CurrRetryCnt	= priv->CurrRetryCnt;
+	CurrTxokCnt	= priv->NumTxOkTotal - priv->LastTxokCnt;
+	CurrRxokCnt	= priv->ieee80211->NumRxOkTotal - priv->LastRxokCnt;
+	CurrSignalStrength = priv->Stats_RecvSignalPower;
+	TxThroughput = (u32)(priv->NumTxOkBytesTotal - priv->LastTxOKBytes);
+	priv->LastTxOKBytes = priv->NumTxOkBytesTotal;
+	priv->CurrentOperaRate = priv->ieee80211->rate/5;
+	//printk("priv->CurrentOperaRate is %d\n",priv->CurrentOperaRate);
+	//2 Compute retry ratio.
+	if (CurrTxokCnt>0)
+	{
+		CurrRetryRate = (u16)(CurrRetryCnt*100/CurrTxokCnt);
+	}
+	else
+	{ // It may be serious retry. To distinguish serious retry or no packets modified by Bruce
+		CurrRetryRate = (u16)(CurrRetryCnt*100/1);
+	}
+
+
+	//
+	// Added by Roger, 2007.01.02.
+	// For debug information.
+	//
+	//printk("\n(1) pHalData->LastRetryRate: %d \n",priv->LastRetryRate);
+	//printk("(2) RetryCnt = %d  \n", CurrRetryCnt);
+	//printk("(3) TxokCnt = %d \n", CurrTxokCnt);
+	//printk("(4) CurrRetryRate = %d \n", CurrRetryRate);
+	//printk("(5) CurrSignalStrength = %d \n",CurrSignalStrength);
+	//printk("(6) TxThroughput is %d\n",TxThroughput);
+	//printk("priv->NumTxOkBytesTotal is %d\n",priv->NumTxOkBytesTotal);
+
+	priv->LastRetryCnt = priv->CurrRetryCnt;
+	priv->LastTxokCnt = priv->NumTxOkTotal;
+	priv->LastRxokCnt = priv->ieee80211->NumRxOkTotal;
+	priv->CurrRetryCnt = 0;
+
+	//2No Tx packets, return to init_rate or not?
+	if (CurrRetryRate==0 && CurrTxokCnt == 0)
+	{
+		//
+		//After 9 (30*300ms) seconds in this condition, we try to raise rate.
+		//
+		priv->TryupingCountNoData++;
+
+//		printk("No Tx packets, TryupingCountNoData(%d)\n", priv->TryupingCountNoData);
+		//[TRC Dell Lab] Extend raised period from 4.5sec to 9sec, Isaiah 2008-02-15 18:00
+		if (priv->TryupingCountNoData>30)
+		{
+			priv->TryupingCountNoData = 0;
+		 	priv->CurrentOperaRate = GetUpgradeTxRate(dev, priv->CurrentOperaRate);
+			// Reset Fail Record
+			priv->LastFailTxRate = 0;
+			priv->LastFailTxRateSS = -200;
+			priv->FailTxRateCount = 0;
+		}
+		goto SetInitialGain;
+	}
+        else
+	{
+		priv->TryupingCountNoData=0; //Reset trying up times.
+	}
+
+
+	//
+	// For Netgear case, I comment out the following signal strength estimation,
+	// which can results in lower rate to transmit when sample is NOT enough (e.g. PING request).
+	// 2007.04.09, by Roger.
+	//
+
+	//
+	// Restructure rate adaptive as the following main stages:
+	// (1) Add retry threshold in 54M upgrading condition with signal strength.
+	// (2) Add the mechanism to degrade to CCK rate according to signal strength
+	//		and retry rate.
+	// (3) Remove all Initial Gain Updates over OFDM rate. To avoid the complicated
+	//		situation, Initial Gain Update is upon on DIG mechanism except CCK rate.
+	// (4) Add the mehanism of trying to upgrade tx rate.
+	// (5) Record the information of upping tx rate to avoid trying upping tx rate constantly.
+	// By Bruce, 2007-06-05.
+	//
+	//
+
+	// 11Mbps or 36Mbps
+	// Check more times in these rate(key rates).
+	//
+	if(priv->CurrentOperaRate == 22 || priv->CurrentOperaRate == 72)
+	{
+		TryUpTh += 9;
+	}
+	//
+	// Let these rates down more difficult.
+	//
+	if(MgntIsCckRate(priv->CurrentOperaRate) || priv->CurrentOperaRate == 36)
+	{
+			TryDownTh += 1;
+	}
+
+	//1 Adjust Rate.
+	if (priv->bTryuping == true)
+	{
+		//2 For Test Upgrading mechanism
+		// Note:
+		// 	Sometimes the throughput is upon on the capability bwtween the AP and NIC,
+		// 	thus the low data rate does not improve the performance.
+		// 	We randomly upgrade the data rate and check if the retry rate is improved.
+
+		// Upgrading rate did not improve the retry rate, fallback to the original rate.
+		if ( (CurrRetryRate > 25) && TxThroughput < priv->LastTxThroughput)
+		{
+			//Not necessary raising rate, fall back rate.
+			bTryDown = true;
+			//printk("case1-1: Not necessary raising rate, fall back rate....\n");
+			//printk("case1-1: pMgntInfo->CurrentOperaRate =%d, TxThroughput = %d, LastThroughput = %d\n",
+			//		priv->CurrentOperaRate, TxThroughput, priv->LastTxThroughput);
+		}
+		else
+		{
+			priv->bTryuping = false;
+		}
+	}
+	else if (CurrSignalStrength > -47 && (CurrRetryRate < 50))
+	{
+		//2For High Power
+		//
+		// Added by Roger, 2007.04.09.
+		// Return to highest data rate, if signal strength is good enough.
+		// SignalStrength threshold(-50dbm) is for RTL8186.
+		// Revise SignalStrength threshold to -51dbm.
+		//
+		// Also need to check retry rate for safety, by Bruce, 2007-06-05.
+		if(priv->CurrentOperaRate != priv->ieee80211->current_network.HighestOperaRate )
+		{
+			bTryUp = true;
+			// Upgrade Tx Rate directly.
+			priv->TryupingCount += TryUpTh;
+		}
+//		printk("case2: StaRateAdaptive87SE: Power(%d) is high enough!!. \n", CurrSignalStrength);
+
+	}
+	else if(CurrTxokCnt > 9 && CurrTxokCnt< 100 && CurrRetryRate >= 600)
+	{
+		//2 For Serious Retry
+		//
+		// Traffic is not busy but our Tx retry is serious.
+		//
+		bTryDown = true;
+		// Let Rate Mechanism to degrade tx rate directly.
+		priv->TryDownCountLowData += TryDownTh;
+//		printk("case3: RA: Tx Retry is serious. Degrade Tx Rate to %d directly...\n", priv->CurrentOperaRate);
+	}
+	else if ( priv->CurrentOperaRate == 108 )
+	{
+		//2For 54Mbps
+		// Air Link
+		if ( (CurrRetryRate>26)&&(priv->LastRetryRate>25))
+//		if ( (CurrRetryRate>40)&&(priv->LastRetryRate>39))
+		{
+			//Down to rate 48Mbps.
+			bTryDown = true;
+		}
+		// Cable Link
+		else if ( (CurrRetryRate>17)&&(priv->LastRetryRate>16) && (CurrSignalStrength > -72))
+//		else if ( (CurrRetryRate>17)&&(priv->LastRetryRate>16) && (CurrSignalStrength > -72))
+		{
+			//Down to rate 48Mbps.
+			bTryDown = true;
+		}
+
+		if(bTryDown && (CurrSignalStrength < -75)) //cable link
+		{
+			priv->TryDownCountLowData += TryDownTh;
+		}
+		//printk("case4---54M \n");
+
+	}
+	else if ( priv->CurrentOperaRate == 96 )
+	{
+		//2For 48Mbps
+		//Air Link
+		if ( ((CurrRetryRate>48) && (priv->LastRetryRate>47)))
+//		if ( ((CurrRetryRate>65) && (priv->LastRetryRate>64)))
+
+		{
+			//Down to rate 36Mbps.
+			bTryDown = true;
+		}
+		//Cable Link
+		else if ( ((CurrRetryRate>21) && (priv->LastRetryRate>20)) && (CurrSignalStrength > -74))
+		{
+			//Down to rate 36Mbps.
+			bTryDown = true;
+		}
+		else if((CurrRetryRate>  (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 ))
+//		else if((CurrRetryRate>  (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 ))
+		{
+			bTryDown = true;
+			priv->TryDownCountLowData += TryDownTh;
+		}
+		else if ( (CurrRetryRate<8) && (priv->LastRetryRate<8) ) //TO DO: need to consider (RSSI)
+//		else if ( (CurrRetryRate<28) && (priv->LastRetryRate<8) )
+		{
+			bTryUp = true;
+		}
+
+		if(bTryDown && (CurrSignalStrength < -75))
+		{
+			priv->TryDownCountLowData += TryDownTh;
+		}
+		//printk("case5---48M \n");
+	}
+	else if ( priv->CurrentOperaRate == 72 )
+	{
+		//2For 36Mbps
+		if ( (CurrRetryRate>43) && (priv->LastRetryRate>41))
+//		if ( (CurrRetryRate>60) && (priv->LastRetryRate>59))
+		{
+			//Down to rate 24Mbps.
+			bTryDown = true;
+		}
+		else if((CurrRetryRate>  (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 ))
+//		else if((CurrRetryRate>  (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 ))
+		{
+			bTryDown = true;
+			priv->TryDownCountLowData += TryDownTh;
+		}
+		else if ( (CurrRetryRate<15) &&  (priv->LastRetryRate<16)) //TO DO: need to consider (RSSI)
+//		else if ( (CurrRetryRate<35) &&  (priv->LastRetryRate<36))
+		{
+			bTryUp = true;
+		}
+
+		if(bTryDown && (CurrSignalStrength < -80))
+		{
+			priv->TryDownCountLowData += TryDownTh;
+		}
+		//printk("case6---36M \n");
+	}
+	else if ( priv->CurrentOperaRate == 48 )
+	{
+		//2For 24Mbps
+		// Air Link
+		if ( ((CurrRetryRate>63) && (priv->LastRetryRate>62)))
+//		if ( ((CurrRetryRate>83) && (priv->LastRetryRate>82)))
+		{
+			//Down to rate 18Mbps.
+			bTryDown = true;
+		}
+		//Cable Link
+		else if ( ((CurrRetryRate>33) && (priv->LastRetryRate>32)) && (CurrSignalStrength > -82) )
+//		 else if ( ((CurrRetryRate>50) && (priv->LastRetryRate>49)) && (CurrSignalStrength > -82) )
+		{
+			//Down to rate 18Mbps.
+			bTryDown = true;
+		}
+		else if((CurrRetryRate>  (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 ))
+//		else if((CurrRetryRate>  (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 ))
+
+		{
+			bTryDown = true;
+			priv->TryDownCountLowData += TryDownTh;
+		}
+  		else if ( (CurrRetryRate<20) && (priv->LastRetryRate<21)) //TO DO: need to consider (RSSI)
+//		else if ( (CurrRetryRate<40) && (priv->LastRetryRate<41))
+		{
+			bTryUp = true;
+		}
+
+		if(bTryDown && (CurrSignalStrength < -82))
+		{
+			priv->TryDownCountLowData += TryDownTh;
+		}
+		//printk("case7---24M \n");
+	}
+	else if ( priv->CurrentOperaRate == 36 )
+	{
+		//2For 18Mbps
+		// original (109, 109)
+		//[TRC Dell Lab] (90, 91), Isaiah 2008-02-18 23:24
+		//			     (85, 86), Isaiah 2008-02-18 24:00
+		if ( ((CurrRetryRate>85) && (priv->LastRetryRate>86)))
+//		if ( ((CurrRetryRate>115) && (priv->LastRetryRate>116)))
+		{
+			//Down to rate 11Mbps.
+			bTryDown = true;
+		}
+		//[TRC Dell Lab]  Isaiah 2008-02-18 23:24
+		else if((CurrRetryRate>  (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 ))
+//		else if((CurrRetryRate>  (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 ))
+		{
+			bTryDown = true;
+			priv->TryDownCountLowData += TryDownTh;
+		}
+		else if ( (CurrRetryRate<22) && (priv->LastRetryRate<23)) //TO DO: need to consider (RSSI)
+//		else if ( (CurrRetryRate<42) && (priv->LastRetryRate<43))
+		{
+			bTryUp = true;
+		}
+		//printk("case8---18M \n");
+	}
+	else if ( priv->CurrentOperaRate == 22 )
+	{
+		//2For 11Mbps
+		if (CurrRetryRate>95)
+//		if (CurrRetryRate>155)
+		{
+			bTryDown = true;
+		}
+		else if ( (CurrRetryRate<29) && (priv->LastRetryRate <30) )//TO DO: need to consider (RSSI)
+//		else if ( (CurrRetryRate<49) && (priv->LastRetryRate <50) )
+			{
+			bTryUp = true;
+			}
+		//printk("case9---11M \n");
+		}
+	else if ( priv->CurrentOperaRate == 11 )
+	{
+		//2For 5.5Mbps
+		if (CurrRetryRate>149)
+//		if (CurrRetryRate>189)
+		{
+			bTryDown = true;
+		}
+		else if ( (CurrRetryRate<60) && (priv->LastRetryRate < 65))
+//		else if ( (CurrRetryRate<80) && (priv->LastRetryRate < 85))
+
+			{
+			bTryUp = true;
+			}
+		//printk("case10---5.5M \n");
+		}
+	else if ( priv->CurrentOperaRate == 4 )
+	{
+		//2For 2 Mbps
+		if((CurrRetryRate>99) && (priv->LastRetryRate>99))
+//		if((CurrRetryRate>199) && (priv->LastRetryRate>199))
+		{
+			bTryDown = true;
+		}
+		else if ( (CurrRetryRate < 65) && (priv->LastRetryRate < 70))
+//		else if ( (CurrRetryRate < 85) && (priv->LastRetryRate < 90))
+		{
+			bTryUp = true;
+		}
+		//printk("case11---2M \n");
+	}
+	else if ( priv->CurrentOperaRate == 2 )
+	{
+		//2For 1 Mbps
+		if( (CurrRetryRate<70) && (priv->LastRetryRate<75))
+//		if( (CurrRetryRate<90) && (priv->LastRetryRate<95))
+		{
+			bTryUp = true;
+		}
+		//printk("case12---1M \n");
+	}
+
+	if(bTryUp && bTryDown)
+    	printk("StaRateAdaptive87B(): Tx Rate tried upping and downing simultaneously!\n");
+
+	//1 Test Upgrading Tx Rate
+	// Sometimes the cause of the low throughput (high retry rate) is the compatibility between the AP and NIC.
+	// To test if the upper rate may cause lower retry rate, this mechanism randomly occurs to test upgrading tx rate.
+	if(!bTryUp && !bTryDown && (priv->TryupingCount == 0) && (priv->TryDownCountLowData == 0)
+		&& priv->CurrentOperaRate != priv->ieee80211->current_network.HighestOperaRate && priv->FailTxRateCount < 2)
+	{
+		if(jiffies% (CurrRetryRate + 101) == 0)
+		{
+			bTryUp = true;
+			priv->bTryuping = true;
+			//printk("StaRateAdaptive87SE(): Randomly try upgrading...\n");
+		}
+	}
+
+	//1 Rate Mechanism
+	if(bTryUp)
+	{
+		priv->TryupingCount++;
+		priv->TryDownCountLowData = 0;
+
+		{
+//			printk("UP: pHalData->TryupingCount = %d\n", priv->TryupingCount);
+//			printk("UP: TryUpTh(%d)+ (FailTxRateCount(%d))^2 =%d\n",
+//				TryUpTh, priv->FailTxRateCount, (TryUpTh + priv->FailTxRateCount * priv->FailTxRateCount) );
+//			printk("UP: pHalData->bTryuping=%d\n",  priv->bTryuping);
+
+		}
+
+		//
+		// Check more times if we need to upgrade indeed.
+		// Because the largest value of pHalData->TryupingCount is 0xFFFF and
+		// the largest value of pHalData->FailTxRateCount is 0x14,
+		// this condition will be satisfied at most every 2 min.
+		//
+
+		if((priv->TryupingCount > (TryUpTh + priv->FailTxRateCount * priv->FailTxRateCount)) ||
+			(CurrSignalStrength > priv->LastFailTxRateSS) || priv->bTryuping)
+		{
+			priv->TryupingCount = 0;
+			//
+			// When transfering from CCK to OFDM, DIG is an important issue.
+			//
+			if(priv->CurrentOperaRate == 22)
+				bUpdateInitialGain = true;
+
+			// The difference in throughput between 48Mbps and 36Mbps is 8M.
+			// So, we must be carefully in this rate scale. Isaiah 2008-02-15.
+			//
+			if(  ((priv->CurrentOperaRate == 72) || (priv->CurrentOperaRate == 48) || (priv->CurrentOperaRate == 36)) &&
+				(priv->FailTxRateCount > 2) )
+				priv->RateAdaptivePeriod= (RATE_ADAPTIVE_TIMER_PERIOD/2);
+
+			// (1)To avoid upgrade frequently to the fail tx rate, add the FailTxRateCount into the threshold.
+			// (2)If the signal strength is increased, it may be able to upgrade.
+
+			priv->CurrentOperaRate = GetUpgradeTxRate(dev, priv->CurrentOperaRate);
+//			printk("StaRateAdaptive87SE(): Upgrade Tx Rate to %d\n", priv->CurrentOperaRate);
+
+			//[TRC Dell Lab] Bypass 12/9/6, Isaiah 2008-02-18 20:00
+			if(priv->CurrentOperaRate ==36)
+			{
+				priv->bUpdateARFR=true;
+				write_nic_word(dev, ARFR, 0x0F8F); //bypass 12/9/6
+//				printk("UP: ARFR=0xF8F\n");
+			}
+			else if(priv->bUpdateARFR)
+			{
+				priv->bUpdateARFR=false;
+				write_nic_word(dev, ARFR, 0x0FFF); //set 1M ~ 54Mbps.
+//				printk("UP: ARFR=0xFFF\n");
+			}
+
+			// Update Fail Tx rate and count.
+			if(priv->LastFailTxRate != priv->CurrentOperaRate)
+			{
+				priv->LastFailTxRate = priv->CurrentOperaRate;
+				priv->FailTxRateCount = 0;
+				priv->LastFailTxRateSS = -200; // Set lowest power.
+			}
+		}
+	}
+	else
+	{
+		if(priv->TryupingCount > 0)
+			priv->TryupingCount --;
+	}
+
+	if(bTryDown)
+	{
+		priv->TryDownCountLowData++;
+		priv->TryupingCount = 0;
+		{
+//			printk("DN: pHalData->TryDownCountLowData = %d\n",priv->TryDownCountLowData);
+//			printk("DN: TryDownTh =%d\n", TryDownTh);
+//			printk("DN: pHalData->bTryuping=%d\n",  priv->bTryuping);
+		}
+
+		//Check if Tx rate can be degraded or Test trying upgrading should fallback.
+		if(priv->TryDownCountLowData > TryDownTh || priv->bTryuping)
+		{
+			priv->TryDownCountLowData = 0;
+			priv->bTryuping = false;
+			// Update fail information.
+			if(priv->LastFailTxRate == priv->CurrentOperaRate)
+			{
+				priv->FailTxRateCount ++;
+				// Record the Tx fail rate signal strength.
+				if(CurrSignalStrength > priv->LastFailTxRateSS)
+				{
+					priv->LastFailTxRateSS = CurrSignalStrength;
+				}
+			}
+			else
+			{
+				priv->LastFailTxRate = priv->CurrentOperaRate;
+				priv->FailTxRateCount = 1;
+				priv->LastFailTxRateSS = CurrSignalStrength;
+			}
+			priv->CurrentOperaRate = GetDegradeTxRate(dev, priv->CurrentOperaRate);
+
+			// Reduce chariot training time at weak signal strength situation. SD3 ED demand.
+			//[TRC Dell Lab] Revise Signal Threshold from -75 to -80 , Isaiah 2008-02-18 20:00
+			if( (CurrSignalStrength < -80) && (priv->CurrentOperaRate > 72 ))
+			{
+				priv->CurrentOperaRate = 72;
+//				printk("DN: weak signal strength (%d), degrade to 36Mbps\n", CurrSignalStrength);
+			}
+
+			//[TRC Dell Lab] Bypass 12/9/6, Isaiah 2008-02-18 20:00
+			if(priv->CurrentOperaRate ==36)
+			{
+				priv->bUpdateARFR=true;
+				write_nic_word(dev, ARFR, 0x0F8F); //bypass 12/9/6
+//				printk("DN: ARFR=0xF8F\n");
+			}
+			else if(priv->bUpdateARFR)
+			{
+				priv->bUpdateARFR=false;
+				write_nic_word(dev, ARFR, 0x0FFF); //set 1M ~ 54Mbps.
+//				printk("DN: ARFR=0xFFF\n");
+			}
+
+			//
+			// When it is CCK rate, it may need to update initial gain to receive lower power packets.
+			//
+			if(MgntIsCckRate(priv->CurrentOperaRate))
+			{
+				bUpdateInitialGain = true;
+			}
+//			printk("StaRateAdaptive87SE(): Degrade Tx Rate to %d\n", priv->CurrentOperaRate);
+		}
+	}
+	else
+	{
+		if(priv->TryDownCountLowData > 0)
+			priv->TryDownCountLowData --;
+	}
+
+	// Keep the Tx fail rate count to equal to 0x15 at most.
+	// Reduce the fail count at least to 10 sec if tx rate is tending stable.
+	if(priv->FailTxRateCount >= 0x15 ||
+		(!bTryUp && !bTryDown && priv->TryDownCountLowData == 0 && priv->TryupingCount && priv->FailTxRateCount > 0x6))
+	{
+		priv->FailTxRateCount --;
+	}
+
+
+	OfdmTxPwrIdx  = priv->chtxpwr_ofdm[priv->ieee80211->current_network.channel];
+	CckTxPwrIdx  = priv->chtxpwr[priv->ieee80211->current_network.channel];
+
+	//[TRC Dell Lab] Mac0x9e increase 2 level in 36M~18M situation, Isaiah 2008-02-18 24:00
+	if((priv->CurrentOperaRate < 96) &&(priv->CurrentOperaRate > 22))
+	{
+		u1bCck = read_nic_byte(dev, CCK_TXAGC);
+		u1bOfdm = read_nic_byte(dev, OFDM_TXAGC);
+
+		// case 1: Never enter High power
+		if(u1bCck == CckTxPwrIdx )
+		{
+			if(u1bOfdm != (OfdmTxPwrIdx+2) )
+			{
+			priv->bEnhanceTxPwr= true;
+			u1bOfdm = ((u1bOfdm+2) > 35) ? 35: (u1bOfdm+2);
+			write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);
+//			printk("Enhance OFDM_TXAGC : +++++ u1bOfdm= 0x%x\n", u1bOfdm);
+			}
+		}
+		// case 2: enter high power
+		else if(u1bCck < CckTxPwrIdx)
+		{
+			if(!priv->bEnhanceTxPwr)
+			{
+				priv->bEnhanceTxPwr= true;
+				u1bOfdm = ((u1bOfdm+2) > 35) ? 35: (u1bOfdm+2);
+				write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);
+				//RT_TRACE(COMP_RATE, DBG_TRACE, ("Enhance OFDM_TXAGC(2) : +++++ u1bOfdm= 0x%x\n", u1bOfdm));
+			}
+		}
+	}
+	else if(priv->bEnhanceTxPwr)  //54/48/11/5.5/2/1
+	{
+		u1bCck = read_nic_byte(dev, CCK_TXAGC);
+		u1bOfdm = read_nic_byte(dev, OFDM_TXAGC);
+
+		// case 1: Never enter High power
+		if(u1bCck == CckTxPwrIdx )
+		{
+		priv->bEnhanceTxPwr= false;
+		write_nic_byte(dev, OFDM_TXAGC, OfdmTxPwrIdx);
+		//printk("Recover OFDM_TXAGC : ===== u1bOfdm= 0x%x\n", OfdmTxPwrIdx);
+		}
+		// case 2: enter high power
+		else if(u1bCck < CckTxPwrIdx)
+		{
+			priv->bEnhanceTxPwr= false;
+			u1bOfdm = ((u1bOfdm-2) > 0) ? (u1bOfdm-2): 0;
+			write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);
+			//RT_TRACE(COMP_RATE, DBG_TRACE, ("Recover OFDM_TXAGC(2): ===== u1bOfdm= 0x%x\n", u1bOfdm));
+
+		}
+	}
+
+	//
+	// We need update initial gain when we set tx rate "from OFDM to CCK" or
+	// "from CCK to OFDM".
+	//
+SetInitialGain:
+	if(bUpdateInitialGain)
+	{
+		if(MgntIsCckRate(priv->CurrentOperaRate)) // CCK
+		{
+			if(priv->InitialGain > priv->RegBModeGainStage)
+			{
+				priv->InitialGainBackUp= priv->InitialGain;
+
+				if(CurrSignalStrength < -85) // Low power, OFDM [0x17] = 26.
+				{
+					//SD3 SYs suggest that CurrSignalStrength < -65, ofdm 0x17=26.
+					priv->InitialGain = priv->RegBModeGainStage;
+				}
+				else if(priv->InitialGain > priv->RegBModeGainStage + 1)
+				{
+					priv->InitialGain -= 2;
+				}
+				else
+				{
+					priv->InitialGain --;
+				}
+				printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n",priv->InitialGain, priv->CurrentOperaRate);
+				UpdateInitialGain(dev);
+			}
+		}
+		else // OFDM
+		{
+			if(priv->InitialGain < 4)
+			{
+				priv->InitialGainBackUp= priv->InitialGain;
+
+				priv->InitialGain ++;
+				printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n",priv->InitialGain, priv->CurrentOperaRate);
+				UpdateInitialGain(dev);
+			}
+		}
+	}
+
+	//Record the related info
+	priv->LastRetryRate = CurrRetryRate;
+	priv->LastTxThroughput = TxThroughput;
+	priv->ieee80211->rate = priv->CurrentOperaRate * 5;
+}
+
+#endif
+#if LINUX_VERSION_CODE >=KERNEL_VERSION(2,6,20)
+void rtl8180_rate_adapter(struct work_struct * work)
+{
+	struct delayed_work *dwork = container_of(work,struct delayed_work,work);
+        struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,rate_adapter_wq);
+        struct net_device *dev = ieee->dev;
+#else
+void rtl8180_rate_adapter(struct net_device *dev)
+{
+
+#endif
+        //struct r8180_priv *priv = ieee80211_priv(dev);
+//    DMESG("---->rtl8180_rate_adapter");
+        StaRateAdaptive87SE(dev);
+//   DMESG("<----rtl8180_rate_adapter");
+}
+void timer_rate_adaptive(unsigned long data)
+{
+	struct r8180_priv* priv = ieee80211_priv((struct net_device *)data);
+	//DMESG("---->timer_rate_adaptive()\n");
+	if(!priv->up)
+	{
+//		DMESG("<----timer_rate_adaptive():driver is not up!\n");
+		return;
+	}
+	if((priv->ieee80211->iw_mode != IW_MODE_MASTER)
+			&& (priv->ieee80211->state == IEEE80211_LINKED) &&
+			(priv->ForcedDataRate == 0) )
+	{
+//	DMESG("timer_rate_adaptive():schedule rate_adapter_wq\n");
+#ifdef CONFIG_RTL818X_S
+		queue_work(priv->ieee80211->wq, (void *)&priv->ieee80211->rate_adapter_wq);
+//		StaRateAdaptive87SE((struct net_device *)data);
+#endif
+	}
+	priv->rateadapter_timer.expires = jiffies + MSECS(priv->RateAdaptivePeriod);
+	add_timer(&priv->rateadapter_timer);
+	//DMESG("<----timer_rate_adaptive()\n");
+}
+//by amy 080312}
+void
+SwAntennaDiversityRxOk8185(
+	struct net_device *dev,
+	u8 SignalStrength
+	)
+{
+	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+
+//	printk("+SwAntennaDiversityRxOk8185: RxSs: %d\n", SignalStrength);
+
+	priv->AdRxOkCnt++;
+
+	if( priv->AdRxSignalStrength != -1)
+	{
+		priv->AdRxSignalStrength = ((priv->AdRxSignalStrength*7) + (SignalStrength*3)) / 10;
+	}
+	else
+	{ // Initialization case.
+		priv->AdRxSignalStrength = SignalStrength;
+	}
+//{+by amy 080312
+	if( priv->LastRxPktAntenna ) //Main antenna.
+		priv->AdMainAntennaRxOkCnt++;
+	else	 // Aux antenna.
+		priv->AdAuxAntennaRxOkCnt++;
+//+by amy 080312
+//	printk("-SwAntennaDiversityRxOk8185: AdRxOkCnt: %d AdRxSignalStrength: %d\n", priv->AdRxOkCnt, priv->AdRxSignalStrength);
+}
+//
+//	Description:
+//		Change Antenna Switch.
+//
+bool
+SetAntenna8185(
+	struct net_device *dev,
+	u8		u1bAntennaIndex
+	)
+{
+	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+	bool bAntennaSwitched = false;
+
+//	printk("+SetAntenna8185(): Antenna is switching to: %d \n", u1bAntennaIndex);
+
+	switch(u1bAntennaIndex)
+	{
+	case 0:
+		switch(priv->rf_chip)
+		{
+		case RF_ZEBRA2:
+		case RF_ZEBRA4:
+#ifdef CONFIG_RTL8185B
+#ifdef CONFIG_RTL818X_S
+			// Mac register, main antenna
+			write_nic_byte(dev, ANTSEL, 0x03);
+			//base band
+			write_phy_cck(dev,0x11, 0x9b); // Config CCK RX antenna.
+			write_phy_ofdm(dev, 0x0d, 0x5c); // Config OFDM RX antenna.
+
+#else
+			// Mac register, main antenna
+			write_nic_byte(dev, ANTSEL, 0x03);
+			//base band
+			write_phy_cck(dev, 0x10, 0x9b); // Config CCK RX antenna.
+			write_phy_ofdm(dev, 0x0d, 0x5c); // Config OFDM RX antenna.
+#endif
+#endif
+
+			bAntennaSwitched = true;
+			break;
+
+		default:
+			printk("SetAntenna8185: unkown RFChipID(%d)\n", priv->rf_chip);
+			break;
+		}
+		break;
+
+	case 1:
+		switch(priv->rf_chip)
+		{
+		case RF_ZEBRA2:
+		case RF_ZEBRA4:
+#ifdef CONFIG_RTL8185B
+#ifdef CONFIG_RTL818X_S
+			// Mac register, aux antenna
+			write_nic_byte(dev, ANTSEL, 0x00);
+			//base band
+			write_phy_cck(dev, 0x11, 0xbb); // Config CCK RX antenna.
+			write_phy_ofdm(dev, 0x0d, 0x54); // Config OFDM RX antenna.
+#else
+			// Mac register, aux antenna
+			write_nic_byte(dev, ANTSEL, 0x00);
+			//base band
+			write_phy_cck(dev, 0x10, 0xbb); // Config CCK RX antenna.
+			write_phy_ofdm(dev, 0x0d, 0x54); // Config OFDM RX antenna.
+#endif
+#endif
+
+			bAntennaSwitched = true;
+			break;
+
+		default:
+			printk("SetAntenna8185: unkown RFChipID(%d)\n", priv->rf_chip);
+			break;
+		}
+		break;
+
+	default:
+		printk("SetAntenna8185: unkown u1bAntennaIndex(%d)\n", u1bAntennaIndex);
+		break;
+	}
+
+	if(bAntennaSwitched)
+	{
+		priv->CurrAntennaIndex = u1bAntennaIndex;
+	}
+
+//	printk("-SetAntenna8185(): return (%#X)\n", bAntennaSwitched);
+
+	return bAntennaSwitched;
+}
+//
+//	Description:
+//		Toggle Antenna switch.
+//
+bool
+SwitchAntenna(
+	struct net_device *dev
+	)
+{
+	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+
+	bool		bResult;
+
+	if(priv->CurrAntennaIndex == 0)
+	{
+#if 0//lzm del 080826
+//by amy 080312
+#ifdef CONFIG_RTL818X_S
+		if(priv->bSwAntennaDiverity)
+			bResult = SetAntennaConfig87SE(dev, 1, true);
+		else
+#endif
+#endif
+			bResult = SetAntenna8185(dev, 1);
+//by amy 080312
+//		printk("SwitchAntenna(): switching to antenna 1 ......\n");
+//		bResult = SetAntenna8185(dev, 1);//-by amy 080312
+	}
+	else
+	{
+#if 0//lzm del 080826
+//by amy 080312
+#ifdef CONFIG_RTL818X_S
+		if(priv->bSwAntennaDiverity)
+			bResult = SetAntennaConfig87SE(dev, 0, true);
+		else
+#endif
+#endif
+			bResult = SetAntenna8185(dev, 0);
+//by amy 080312
+//		printk("SwitchAntenna(): switching to antenna 0 ......\n");
+//		bResult = SetAntenna8185(dev, 0);//-by amy 080312
+	}
+
+	return bResult;
+}
+//
+//	Description:
+//		Engine of SW Antenna Diversity mechanism.
+//		Since 8187 has no Tx part information,
+//		this implementation is only dependend on Rx part information.
+//
+//	2006.04.17, by rcnjko.
+//
+void
+SwAntennaDiversity(
+	struct net_device *dev
+	)
+{
+	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+	bool   bSwCheckSS=false;
+//	printk("+SwAntennaDiversity(): CurrAntennaIndex: %d\n", priv->CurrAntennaIndex);
+//	printk("AdTickCount is %d\n",priv->AdTickCount);
+//by amy 080312
+	if(bSwCheckSS)
+	{
+		priv->AdTickCount++;
+
+		printk("(1) AdTickCount: %d, AdCheckPeriod: %d\n",
+			priv->AdTickCount, priv->AdCheckPeriod);
+		printk("(2) AdRxSignalStrength: %ld, AdRxSsThreshold: %ld\n",
+			priv->AdRxSignalStrength, priv->AdRxSsThreshold);
+	}
+//	priv->AdTickCount++;//-by amy 080312
+
+	// Case 1. No Link.
+	if(priv->ieee80211->state != IEEE80211_LINKED)
+	{
+	//	printk("SwAntennaDiversity(): Case 1. No Link.\n");
+
+		priv->bAdSwitchedChecking = false;
+		// I switch antenna here to prevent any one of antenna is broken before link established, 2006.04.18, by rcnjko..
+		SwitchAntenna(dev);
+	}
+	// Case 2. Linked but no packet received.
+	else if(priv->AdRxOkCnt == 0)
+	{
+	//	printk("SwAntennaDiversity(): Case 2. Linked but no packet received.\n");
+
+		priv->bAdSwitchedChecking = false;
+		SwitchAntenna(dev);
+	}
+	// Case 3. Evaluate last antenna switch action and undo it if necessary.
+	else if(priv->bAdSwitchedChecking == true)
+	{
+	//	printk("SwAntennaDiversity(): Case 3. Evaluate last antenna switch action.\n");
+
+		priv->bAdSwitchedChecking = false;
+
+		// Adjust Rx signal strength threashold.
+		priv->AdRxSsThreshold = (priv->AdRxSignalStrength + priv->AdRxSsBeforeSwitched) / 2;
+
+		priv->AdRxSsThreshold = (priv->AdRxSsThreshold > priv->AdMaxRxSsThreshold) ?
+					priv->AdMaxRxSsThreshold: priv->AdRxSsThreshold;
+		if(priv->AdRxSignalStrength < priv->AdRxSsBeforeSwitched)
+		{ // Rx signal strength is not improved after we swtiched antenna. => Swich back.
+//			printk("SwAntennaDiversity(): Rx Signal Strength is not improved, CurrRxSs: %d, LastRxSs: %d\n",
+//				priv->AdRxSignalStrength, priv->AdRxSsBeforeSwitched);
+//by amy 080312
+			// Increase Antenna Diversity checking period due to bad decision.
+			priv->AdCheckPeriod *= 2;
+//by amy 080312
+			// Increase Antenna Diversity checking period.
+			if(priv->AdCheckPeriod > priv->AdMaxCheckPeriod)
+				priv->AdCheckPeriod = priv->AdMaxCheckPeriod;
+
+			// Wrong deceision => switch back.
+			SwitchAntenna(dev);
+		}
+		else
+		{ // Rx Signal Strength is improved.
+//			printk("SwAntennaDiversity(): Rx Signal Strength is improved, CurrRxSs: %d, LastRxSs: %d\n",
+//				priv->AdRxSignalStrength, priv->AdRxSsBeforeSwitched);
+
+			// Reset Antenna Diversity checking period to its min value.
+			priv->AdCheckPeriod = priv->AdMinCheckPeriod;
+		}
+
+//		printk("SwAntennaDiversity(): AdRxSsThreshold: %d, AdCheckPeriod: %d\n",
+//			priv->AdRxSsThreshold, priv->AdCheckPeriod);
+	}
+	// Case 4. Evaluate if we shall switch antenna now.
+	// Cause Table Speed is very fast in TRC Dell Lab, we check it every time.
+	else// if(priv->AdTickCount >= priv->AdCheckPeriod)//-by amy 080312
+	{
+//		printk("SwAntennaDiversity(): Case 4. Evaluate if we shall switch antenna now.\n");
+
+		priv->AdTickCount = 0;
+
+		//
+		// <Roger_Notes> We evaluate RxOk counts for each antenna first and than
+		// evaluate signal strength.
+		// The following operation can overcome the disability of CCA on both two antennas
+		// When signal strength was extremely low or high.
+		// 2008.01.30.
+		//
+
+		//
+		// Evaluate RxOk count from each antenna if we shall switch default antenna now.
+		// Added by Roger, 2008.02.21.
+//{by amy 080312
+		if((priv->AdMainAntennaRxOkCnt < priv->AdAuxAntennaRxOkCnt)
+			&& (priv->CurrAntennaIndex == 0))
+		{ // We set Main antenna as default but RxOk count was less than Aux ones.
+
+	//		printk("SwAntennaDiversity(): Main antenna RxOK is poor, AdMainAntennaRxOkCnt: %d, AdAuxAntennaRxOkCnt: %d\n",
+	//			priv->AdMainAntennaRxOkCnt, priv->AdAuxAntennaRxOkCnt);
+
+			// Switch to Aux antenna.
+			SwitchAntenna(dev);
+			priv->bHWAdSwitched = true;
+		}
+		else if((priv->AdAuxAntennaRxOkCnt < priv->AdMainAntennaRxOkCnt)
+			&& (priv->CurrAntennaIndex == 1))
+		{ // We set Aux antenna as default but RxOk count was less than Main ones.
+
+	//		printk("SwAntennaDiversity(): Aux antenna RxOK is poor, AdMainAntennaRxOkCnt: %d, AdAuxAntennaRxOkCnt: %d\n",
+	//			priv->AdMainAntennaRxOkCnt, priv->AdAuxAntennaRxOkCnt);
+
+			// Switch to Main antenna.
+			SwitchAntenna(dev);
+			priv->bHWAdSwitched = true;
+		}
+		else
+		{// Default antenna is better.
+
+	//		printk("SwAntennaDiversity(): Default antenna is better., AdMainAntennaRxOkCnt: %d, AdAuxAntennaRxOkCnt: %d\n",
+	//			priv->AdMainAntennaRxOkCnt, priv->AdAuxAntennaRxOkCnt);
+
+			// Still need to check current signal strength.
+			priv->bHWAdSwitched = false;
+		}
+		//
+		// <Roger_Notes> We evaluate Rx signal strength ONLY when default antenna
+		// didn't changed by HW evaluation.
+		// 2008.02.27.
+		//
+		// [TRC Dell Lab] SignalStrength is inaccuracy. Isaiah 2008-03-05
+		// For example, Throughput of aux is better than main antenna(about 10M v.s 2M),
+		// but AdRxSignalStrength is less than main.
+		// Our guess is that main antenna have lower throughput and get many change
+		// to receive more CCK packets(ex.Beacon) which have stronger SignalStrength.
+		//
+		if( (!priv->bHWAdSwitched) && (bSwCheckSS))
+		{
+//by amy 080312}
+		// Evaluate Rx signal strength if we shall switch antenna now.
+		if(priv->AdRxSignalStrength < priv->AdRxSsThreshold)
+		{ // Rx signal strength is weak => Switch Antenna.
+//			printk("SwAntennaDiversity(): Rx Signal Strength is weak, CurrRxSs: %d, RxSsThreshold: %d\n",
+//				priv->AdRxSignalStrength, priv->AdRxSsThreshold);
+
+			priv->AdRxSsBeforeSwitched = priv->AdRxSignalStrength;
+			priv->bAdSwitchedChecking = true;
+
+			SwitchAntenna(dev);
+		}
+		else
+		{ // Rx signal strength is OK.
+//			printk("SwAntennaDiversity(): Rx Signal Strength is OK, CurrRxSs: %d, RxSsThreshold: %d\n",
+//				priv->AdRxSignalStrength, priv->AdRxSsThreshold);
+
+			priv->bAdSwitchedChecking = false;
+			// Increase Rx signal strength threashold if necessary.
+			if(	(priv->AdRxSignalStrength > (priv->AdRxSsThreshold + 10)) && // Signal is much stronger than current threshold
+				priv->AdRxSsThreshold <= priv->AdMaxRxSsThreshold) // Current threhold is not yet reach upper limit.
+			{
+				priv->AdRxSsThreshold = (priv->AdRxSsThreshold + priv->AdRxSignalStrength) / 2;
+				priv->AdRxSsThreshold = (priv->AdRxSsThreshold > priv->AdMaxRxSsThreshold) ?
+												priv->AdMaxRxSsThreshold: priv->AdRxSsThreshold;//+by amy 080312
+			}
+
+			// Reduce Antenna Diversity checking period if possible.
+			if( priv->AdCheckPeriod > priv->AdMinCheckPeriod )
+			{
+				priv->AdCheckPeriod /= 2;
+			}
+		}
+		}
+	}
+//by amy 080312
+	// Reset antenna diversity Rx related statistics.
+	priv->AdRxOkCnt = 0;
+	priv->AdMainAntennaRxOkCnt = 0;
+	priv->AdAuxAntennaRxOkCnt = 0;
+//by amy 080312
+
+//	priv->AdRxOkCnt = 0;//-by amy 080312
+
+//	printk("-SwAntennaDiversity()\n");
+}
+
+//
+//	Description:
+//		Return TRUE if we shall perform Tx Power Tracking Mecahnism, FALSE otherwise.
+//
+bool
+CheckTxPwrTracking(	struct net_device *dev)
+{
+	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+
+	if(!priv->bTxPowerTrack)
+	{
+		return false;
+	}
+
+//lzm reserved 080826
+	//if(priv->bScanInProgress)
+	//{
+	//	return false;
+	//}
+
+	//if 87SE is in High Power , don't do Tx Power Tracking. asked by SD3 ED. 2008-08-08 Isaiah
+	if(priv->bToUpdateTxPwr)
+	{
+		return false;
+	}
+
+	return true;
+}
+
+
+//
+//	Description:
+//		Timer callback function of SW Antenna Diversity.
+//
+void
+SwAntennaDiversityTimerCallback(
+	struct net_device *dev
+	)
+{
+	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+	RT_RF_POWER_STATE rtState;
+
+	//printk("+SwAntennaDiversityTimerCallback()\n");
+
+	//
+	// We do NOT need to switch antenna while RF is off.
+	// 2007.05.09, added by Roger.
+	//
+	rtState = priv->eRFPowerState;
+	do{
+		if (rtState == eRfOff)
+		{
+//			printk("SwAntennaDiversityTimer - RF is OFF.\n");
+			break;
+		}
+		else if (rtState == eRfSleep)
+		{
+			// Don't access BB/RF under Disable PLL situation.
+			//RT_TRACE((COMP_RF|COMP_ANTENNA), DBG_LOUD, ("SwAntennaDiversityTimerCallback(): RF is Sleep => skip it\n"));
+			break;
+		}
+		SwAntennaDiversity(dev);
+
+	}while(false);
+
+	if(priv->up)
+	{
+		priv->SwAntennaDiversityTimer.expires = jiffies + MSECS(ANTENNA_DIVERSITY_TIMER_PERIOD);
+		add_timer(&priv->SwAntennaDiversityTimer);
+	}
+
+	//printk("-SwAntennaDiversityTimerCallback()\n");
+}
+
diff --git a/drivers/staging/rtl8187se/r8180_dm.h b/drivers/staging/rtl8187se/r8180_dm.h
index 3de92f040f9..b2736c8e521 100644
--- a/drivers/staging/rtl8187se/r8180_dm.h
+++ b/drivers/staging/rtl8187se/r8180_dm.h
@@ -1,41 +1,41 @@
-#ifndef R8180_DM_H 

-#define R8180_DM_H

-

-#include "r8180.h"

-//#include "r8180_hw.h"

-//#include "r8180_93cx6.h"

-void SwAntennaDiversityRxOk8185(struct net_device *dev, u8 SignalStrength);

-bool SetAntenna8185(struct net_device *dev,	u8 u1bAntennaIndex);

-bool SwitchAntenna(	struct net_device *dev);

-void SwAntennaDiversity(struct net_device *dev	);

-void SwAntennaDiversityTimerCallback(struct net_device *dev);

-bool CheckDig(struct net_device *dev);

-bool CheckHighPower(struct net_device *dev);

-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))

-void rtl8180_hw_dig_wq (struct work_struct *work);

-#else

-void rtl8180_hw_dig_wq(struct net_device *dev);

-#endif

-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))

-void rtl8180_tx_pw_wq (struct work_struct *work);

-#else

-void rtl8180_tx_pw_wq(struct net_device *dev);

-#endif

-#if LINUX_VERSION_CODE >=KERNEL_VERSION(2,6,20)

-void rtl8180_rate_adapter(struct work_struct * work);

-

-#else

-void rtl8180_rate_adapter(struct net_device *dev);

-

-#endif

-void TxPwrTracking87SE(struct net_device *dev);

-bool CheckTxPwrTracking(struct net_device *dev);

-#if LINUX_VERSION_CODE >=KERNEL_VERSION(2,6,20)

-void rtl8180_rate_adapter(struct work_struct * work);

-#else

-void rtl8180_rate_adapter(struct net_device *dev);

-#endif

-void timer_rate_adaptive(unsigned long data);

-

-

-#endif

+#ifndef R8180_DM_H
+#define R8180_DM_H
+
+#include "r8180.h"
+//#include "r8180_hw.h"
+//#include "r8180_93cx6.h"
+void SwAntennaDiversityRxOk8185(struct net_device *dev, u8 SignalStrength);
+bool SetAntenna8185(struct net_device *dev,	u8 u1bAntennaIndex);
+bool SwitchAntenna(	struct net_device *dev);
+void SwAntennaDiversity(struct net_device *dev	);
+void SwAntennaDiversityTimerCallback(struct net_device *dev);
+bool CheckDig(struct net_device *dev);
+bool CheckHighPower(struct net_device *dev);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+void rtl8180_hw_dig_wq (struct work_struct *work);
+#else
+void rtl8180_hw_dig_wq(struct net_device *dev);
+#endif
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
+void rtl8180_tx_pw_wq (struct work_struct *work);
+#else
+void rtl8180_tx_pw_wq(struct net_device *dev);
+#endif
+#if LINUX_VERSION_CODE >=KERNEL_VERSION(2,6,20)
+void rtl8180_rate_adapter(struct work_struct * work);
+
+#else
+void rtl8180_rate_adapter(struct net_device *dev);
+
+#endif
+void TxPwrTracking87SE(struct net_device *dev);
+bool CheckTxPwrTracking(struct net_device *dev);
+#if LINUX_VERSION_CODE >=KERNEL_VERSION(2,6,20)
+void rtl8180_rate_adapter(struct work_struct * work);
+#else
+void rtl8180_rate_adapter(struct net_device *dev);
+#endif
+void timer_rate_adaptive(unsigned long data);
+
+
+#endif