aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorJames Smart <James.Smart@Emulex.Com>2008-08-24 21:50:30 -0400
committerJames Bottomley <James.Bottomley@HansenPartnership.com>2008-10-13 09:28:55 -0400
commit9399627f340794baebf7e4581470ccb92f019acc (patch)
treec30e656a1c353e2f025bb5ca3daf142128434a34 /drivers
parent0f1f53a7efd60d7cdd8e82925f0c62dcf64ba092 (diff)
[SCSI] lpfc 8.2.8 : Add MSI-X support
Add support for MSI-X Multi-Message interrupts. We use different vectors for fast-path interrupts (i/o) and slow-patch interrupts (discovery, etc). Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/scsi/lpfc/lpfc.h35
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c8
-rw-r--r--drivers/scsi/lpfc/lpfc_crtn.h43
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_hw.h63
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c230
-rw-r--r--drivers/scsi/lpfc/lpfc_mbox.c80
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c401
-rw-r--r--drivers/scsi/lpfc/lpfc_version.h4
9 files changed, 699 insertions, 167 deletions
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index aee5444b63d..18153846611 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -49,6 +49,9 @@ struct lpfc_sli2_slim;
#define LPFC_HB_MBOX_INTERVAL 5 /* Heart beat interval in seconds. */
#define LPFC_HB_MBOX_TIMEOUT 30 /* Heart beat timeout in seconds. */
+/* Error Attention event polling interval */
+#define LPFC_ERATT_POLL_INTERVAL 5 /* EATT poll interval in seconds */
+
/* Define macros for 64 bit support */
#define putPaddrLow(addr) ((uint32_t) (0xffffffff & (u64)(addr)))
#define putPaddrHigh(addr) ((uint32_t) (0xffffffff & (((u64)(addr))>>32)))
@@ -60,6 +63,9 @@ struct lpfc_sli2_slim;
#define MAX_HBAEVT 32
+/* Number of MSI-X vectors the driver uses */
+#define LPFC_MSIX_VECTORS 2
+
/* lpfc wait event data ready flag */
#define LPFC_DATA_READY (1<<0)
@@ -423,12 +429,16 @@ struct lpfc_hba {
#define LS_NPIV_FAB_SUPPORTED 0x2 /* Fabric supports NPIV */
#define LS_IGNORE_ERATT 0x4 /* intr handler should ignore ERATT */
+ uint32_t hba_flag; /* hba generic flags */
+#define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */
+
struct lpfc_dmabuf slim2p;
MAILBOX_t *mbox;
uint32_t *inb_ha_copy;
uint32_t *inb_counter;
uint32_t inb_last_counter;
+ uint32_t ha_copy;
struct _PCB *pcb;
struct _IOCB *IOCBs;
@@ -544,6 +554,7 @@ struct lpfc_hba {
uint8_t soft_wwn_enable;
struct timer_list fcp_poll_timer;
+ struct timer_list eratt_poll;
/*
* stat counters
@@ -573,7 +584,7 @@ struct lpfc_hba {
struct fc_host_statistics link_stats;
enum intr_type_t intr_type;
- struct msix_entry msix_entries[1];
+ struct msix_entry msix_entries[LPFC_MSIX_VECTORS];
struct list_head port_list;
struct lpfc_vport *pport; /* physical lpfc_vport pointer */
@@ -660,6 +671,28 @@ lpfc_worker_wake_up(struct lpfc_hba *phba)
return;
}
+static inline void
+lpfc_sli_read_hs(struct lpfc_hba *phba)
+{
+ /*
+ * There was a link/board error. Read the status register to retrieve
+ * the error event and process it.
+ */
+ phba->sli.slistat.err_attn_event++;
+
+ /* Save status info */
+ phba->work_hs = readl(phba->HSregaddr);
+ phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
+ phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
+
+ /* Clear chip Host Attention error bit */
+ writel(HA_ERATT, phba->HAregaddr);
+ readl(phba->HAregaddr); /* flush */
+ phba->pport->stopped = 1;
+
+ return;
+}
+
#define FC_REG_DUMP_EVENT 0x10 /* Register for Dump events */
#define FC_REG_TEMPERATURE_EVENT 0x20 /* Register for temperature
event */
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index b9acc6eefe6..21397f37010 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -2372,12 +2372,12 @@ LPFC_ATTR_RW(poll_tmo, 10, 1, 255,
/*
# lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that
# support this feature
-# 0 = MSI disabled (default)
+# 0 = MSI disabled
# 1 = MSI enabled
-# 2 = MSI-X enabled
-# Value range is [0,2]. Default value is 0.
+# 2 = MSI-X enabled (default)
+# Value range is [0,2]. Default value is 2.
*/
-LPFC_ATTR_R(use_msi, 0, 0, 2, "Use Message Signaled Interrupts (1) or "
+LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or "
"MSI-X (2), if possible");
/*
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 495afd06936..7d173f4a37f 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -18,7 +18,7 @@
* included with this package. *
*******************************************************************/
-typedef int (*node_filter)(struct lpfc_nodelist *ndlp, void *param);
+typedef int (*node_filter)(struct lpfc_nodelist *, void *);
struct fc_rport;
void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
@@ -26,11 +26,11 @@ void lpfc_read_nv(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_config_async(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
void lpfc_heart_beat(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb,
- struct lpfc_dmabuf *mp);
+int lpfc_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *, struct lpfc_dmabuf *);
void lpfc_clear_la(struct lpfc_hba *, LPFC_MBOXQ_t *);
-void lpfc_issue_clear_la(struct lpfc_hba *phba, struct lpfc_vport *vport);
+void lpfc_issue_clear_la(struct lpfc_hba *, struct lpfc_vport *);
void lpfc_config_link(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_config_msi(struct lpfc_hba *, LPFC_MBOXQ_t *);
int lpfc_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *, int);
void lpfc_read_config(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_read_lnk_stat(struct lpfc_hba *, LPFC_MBOXQ_t *);
@@ -43,7 +43,7 @@ void lpfc_unreg_vpi(struct lpfc_hba *, uint16_t, LPFC_MBOXQ_t *);
void lpfc_init_link(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t);
struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t);
-void lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove);
+void lpfc_cleanup_rpis(struct lpfc_vport *, int);
int lpfc_linkdown(struct lpfc_hba *);
void lpfc_port_link_failure(struct lpfc_vport *);
void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *);
@@ -135,7 +135,7 @@ void lpfc_ct_unsol_event(struct lpfc_hba *, struct lpfc_sli_ring *,
int lpfc_ns_cmd(struct lpfc_vport *, int, uint8_t, uint32_t);
int lpfc_fdmi_cmd(struct lpfc_vport *, struct lpfc_nodelist *, int);
void lpfc_fdmi_tmo(unsigned long);
-void lpfc_fdmi_timeout_handler(struct lpfc_vport *vport);
+void lpfc_fdmi_timeout_handler(struct lpfc_vport *);
int lpfc_config_port_prep(struct lpfc_hba *);
int lpfc_config_port_post(struct lpfc_hba *);
@@ -155,6 +155,8 @@ int lpfc_sli_queue_setup(struct lpfc_hba *);
void lpfc_handle_eratt(struct lpfc_hba *);
void lpfc_handle_latt(struct lpfc_hba *);
irqreturn_t lpfc_intr_handler(int, void *);
+irqreturn_t lpfc_sp_intr_handler(int, void *);
+irqreturn_t lpfc_fp_intr_handler(int, void *);
void lpfc_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_config_ring(struct lpfc_hba *, int, LPFC_MBOXQ_t *);
@@ -175,11 +177,12 @@ void lpfc_mem_free(struct lpfc_hba *);
void lpfc_stop_vport_timers(struct lpfc_vport *);
void lpfc_poll_timeout(unsigned long ptr);
-void lpfc_poll_start_timer(struct lpfc_hba * phba);
-void lpfc_sli_poll_fcp_ring(struct lpfc_hba * hba);
+void lpfc_poll_start_timer(struct lpfc_hba *);
+void lpfc_poll_eratt(unsigned long);
+void lpfc_sli_poll_fcp_ring(struct lpfc_hba *);
struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *);
-void lpfc_sli_release_iocbq(struct lpfc_hba * phba, struct lpfc_iocbq * iocb);
-uint16_t lpfc_sli_next_iotag(struct lpfc_hba * phba, struct lpfc_iocbq * iocb);
+void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *);
+uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *);
void lpfc_reset_barrier(struct lpfc_hba * phba);
int lpfc_sli_brdready(struct lpfc_hba *, uint32_t);
@@ -187,11 +190,13 @@ int lpfc_sli_brdkill(struct lpfc_hba *);
int lpfc_sli_brdreset(struct lpfc_hba *);
int lpfc_sli_brdrestart(struct lpfc_hba *);
int lpfc_sli_hba_setup(struct lpfc_hba *);
+int lpfc_sli_config_port(struct lpfc_hba *, int);
int lpfc_sli_host_down(struct lpfc_vport *);
int lpfc_sli_hba_down(struct lpfc_hba *);
int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
int lpfc_sli_handle_mb_event(struct lpfc_hba *);
int lpfc_sli_flush_mbox_queue(struct lpfc_hba *);
+int lpfc_sli_check_eratt(struct lpfc_hba *);
int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
struct lpfc_sli_ring *, uint32_t);
void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
@@ -227,17 +232,13 @@ struct lpfc_nodelist *lpfc_findnode_did(struct lpfc_vport *, uint32_t);
struct lpfc_nodelist *lpfc_findnode_wwpn(struct lpfc_vport *,
struct lpfc_name *);
-int lpfc_sli_issue_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq,
- uint32_t timeout);
-
-int lpfc_sli_issue_iocb_wait(struct lpfc_hba * phba,
- struct lpfc_sli_ring * pring,
- struct lpfc_iocbq * piocb,
- struct lpfc_iocbq * prspiocbq,
- uint32_t timeout);
-void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba * phba,
- struct lpfc_iocbq * cmdiocb,
- struct lpfc_iocbq * rspiocb);
+int lpfc_sli_issue_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
+
+int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, struct lpfc_sli_ring *,
+ struct lpfc_iocbq *, struct lpfc_iocbq *,
+ uint32_t);
+void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *, struct lpfc_iocbq *,
+ struct lpfc_iocbq *);
void lpfc_sli_free_hbq(struct lpfc_hba *, struct hbq_dmabuf *);
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 897ef7d7a8e..3b00d9b86c7 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -369,6 +369,7 @@ lpfc_work_done(struct lpfc_hba *phba)
spin_unlock_irq(&phba->hbalock);
if (ha_copy & HA_ERATT)
+ /* Handle the error attention event */
lpfc_handle_eratt(phba);
if (ha_copy & HA_MBATT)
@@ -376,6 +377,7 @@ lpfc_work_done(struct lpfc_hba *phba)
if (ha_copy & HA_LATT)
lpfc_handle_latt(phba);
+
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
for(i = 0; i <= phba->max_vpi; i++) {
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index ee4e50175ca..5de5dabbbee 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1203,6 +1203,18 @@ typedef struct { /* FireFly BIU registers */
#define HA_RXATT 0x00000008 /* Bit 3 */
#define HA_RXMASK 0x0000000f
+#define HA_R0_CLR_MSK (HA_R0RE_REQ | HA_R0CE_RSP | HA_R0ATT)
+#define HA_R1_CLR_MSK (HA_R1RE_REQ | HA_R1CE_RSP | HA_R1ATT)
+#define HA_R2_CLR_MSK (HA_R2RE_REQ | HA_R2CE_RSP | HA_R2ATT)
+#define HA_R3_CLR_MSK (HA_R3RE_REQ | HA_R3CE_RSP | HA_R3ATT)
+
+#define HA_R0_POS 3
+#define HA_R1_POS 7
+#define HA_R2_POS 11
+#define HA_R3_POS 15
+#define HA_LE_POS 29
+#define HA_MB_POS 30
+#define HA_ER_POS 31
/* Chip Attention Register */
#define CA_REG_OFFSET 4 /* Byte offset from register base address */
@@ -1240,7 +1252,7 @@ typedef struct { /* FireFly BIU registers */
/* Host Control Register */
-#define HC_REG_OFFSET 12 /* Word offset from register base address */
+#define HC_REG_OFFSET 12 /* Byte offset from register base address */
#define HC_MBINT_ENA 0x00000001 /* Bit 0 */
#define HC_R0INT_ENA 0x00000002 /* Bit 1 */
@@ -1253,6 +1265,19 @@ typedef struct { /* FireFly BIU registers */
#define HC_LAINT_ENA 0x20000000 /* Bit 29 */
#define HC_ERINT_ENA 0x80000000 /* Bit 31 */
+/* Message Signaled Interrupt eXtension (MSI-X) message identifiers */
+#define MSIX_DFLT_ID 0
+#define MSIX_RNG0_ID 0
+#define MSIX_RNG1_ID 1
+#define MSIX_RNG2_ID 2
+#define MSIX_RNG3_ID 3
+
+#define MSIX_LINK_ID 4
+#define MSIX_MBOX_ID 5
+
+#define MSIX_SPARE0_ID 6
+#define MSIX_SPARE1_ID 7
+
/* Mailbox Commands */
#define MBX_SHUTDOWN 0x00 /* terminate testing */
#define MBX_LOAD_SM 0x01
@@ -1290,6 +1315,7 @@ typedef struct { /* FireFly BIU registers */
#define MBX_KILL_BOARD 0x24
#define MBX_CONFIG_FARP 0x25
#define MBX_BEACON 0x2A
+#define MBX_CONFIG_MSI 0x30
#define MBX_HEARTBEAT 0x31
#define MBX_WRITE_VPARMS 0x32
#define MBX_ASYNCEVT_ENABLE 0x33
@@ -2599,6 +2625,40 @@ typedef struct {
} CONFIG_PORT_VAR;
+/* Structure for MB Command CONFIG_MSI (0x30) */
+struct config_msi_var {
+#ifdef __BIG_ENDIAN_BITFIELD
+ uint32_t dfltMsgNum:8; /* Default message number */
+ uint32_t rsvd1:11; /* Reserved */
+ uint32_t NID:5; /* Number of secondary attention IDs */
+ uint32_t rsvd2:5; /* Reserved */
+ uint32_t dfltPresent:1; /* Default message number present */
+ uint32_t addFlag:1; /* Add association flag */
+ uint32_t reportFlag:1; /* Report association flag */
+#else /* __LITTLE_ENDIAN_BITFIELD */
+ uint32_t reportFlag:1; /* Report association flag */
+ uint32_t addFlag:1; /* Add association flag */
+ uint32_t dfltPresent:1; /* Default message number present */
+ uint32_t rsvd2:5; /* Reserved */
+ uint32_t NID:5; /* Number of secondary attention IDs */
+ uint32_t rsvd1:11; /* Reserved */
+ uint32_t dfltMsgNum:8; /* Default message number */
+#endif
+ uint32_t attentionConditions[2];
+ uint8_t attentionId[16];
+ uint8_t messageNumberByHA[64];
+ uint8_t messageNumberByID[16];
+ uint32_t autoClearHA[2];
+#ifdef __BIG_ENDIAN_BITFIELD
+ uint32_t rsvd3:16;
+ uint32_t autoClearID:16;
+#else /* __LITTLE_ENDIAN_BITFIELD */
+ uint32_t autoClearID:16;
+ uint32_t rsvd3:16;
+#endif
+ uint32_t rsvd4;
+};
+
/* SLI-2 Port Control Block */
/* SLIM POINTER */
@@ -2722,6 +2782,7 @@ typedef union {
REG_VPI_VAR varRegVpi; /* cmd = 0x96 (REG_VPI) */
UNREG_VPI_VAR varUnregVpi; /* cmd = 0x97 (UNREG_VPI) */
ASYNCEVT_ENABLE_VAR varCfgAsyncEvent; /*cmd = x33 (CONFIG_ASYNC) */
+ struct config_msi_var varCfgMSI;/* cmd = x30 (CONFIG_MSI) */
} MAILVARIANTS;
/*
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 333166b1790..49577d5f130 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -389,6 +389,29 @@ lpfc_config_port_post(struct lpfc_hba *phba)
if (phba->sli_rev != 3)
lpfc_post_rcv_buf(phba);
+ /*
+ * Configure HBA MSI-X attention conditions to messages if MSI-X mode
+ */
+ if (phba->intr_type == MSIX) {
+ rc = lpfc_config_msi(phba, pmb);
+ if (rc) {
+ mempool_free(pmb, phba->mbox_mem_pool);
+ return -EIO;
+ }
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "0352 Config MSI mailbox command "
+ "failed, mbxCmd x%x, mbxStatus x%x\n",
+ pmb->mb.mbxCommand, pmb->mb.mbxStatus);
+ mempool_free(pmb, phba->mbox_mem_pool);
+ return -EIO;
+ }
+ }
+
+ /* Initialize ERATT handling flag */
+ phba->hba_flag &= ~HBA_ERATT_HANDLED;
+
/* Enable appropriate host interrupts */
spin_lock_irq(&phba->hbalock);
status = readl(phba->HCregaddr);
@@ -404,20 +427,21 @@ lpfc_config_port_post(struct lpfc_hba *phba)
if ((phba->cfg_poll & ENABLE_FCP_RING_POLLING) &&
(phba->cfg_poll & DISABLE_FCP_RING_INT))
- status &= ~(HC_R0INT_ENA << LPFC_FCP_RING);
+ status &= ~(HC_R0INT_ENA);
writel(status, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
spin_unlock_irq(&phba->hbalock);
- /*
- * Setup the ring 0 (els) timeout handler
- */
- timeout = phba->fc_ratov << 1;
+ /* Set up ring-0 (ELS) timer */
+ timeout = phba->fc_ratov * 2;
mod_timer(&vport->els_tmofunc, jiffies + HZ * timeout);
+ /* Set up heart beat (HB) timer */
mod_timer(&phba->hb_tmofunc, jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
phba->hb_outstanding = 0;
phba->last_completion_time = jiffies;
+ /* Set up error attention (ERATT) polling timer */
+ mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL);
lpfc_init_link(phba, pmb, phba->cfg_topology, phba->cfg_link_speed);
pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
@@ -581,12 +605,15 @@ lpfc_hb_timeout(unsigned long ptr)
unsigned long iflag;
phba = (struct lpfc_hba *)ptr;
+
+ /* Check for heart beat timeout conditions */
spin_lock_irqsave(&phba->pport->work_port_lock, iflag);
tmo_posted = phba->pport->work_port_events & WORKER_HB_TMO;
if (!tmo_posted)
phba->pport->work_port_events |= WORKER_HB_TMO;
spin_unlock_irqrestore(&phba->pport->work_port_lock, iflag);
+ /* Tell the worker thread there is work to do */
if (!tmo_posted)
lpfc_worker_wake_up(phba);
return;
@@ -617,6 +644,7 @@ lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
phba->hb_outstanding = 0;
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+ /* Check and reset heart-beat timer is necessary */
mempool_free(pmboxq, phba->mbox_mem_pool);
if (!(phba->pport->fc_flag & FC_OFFLINE_MODE) &&
!(phba->link_state == LPFC_HBA_ERROR) &&
@@ -856,8 +884,8 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
} else {
/* The if clause above forces this code path when the status
- * failure is a value other than FFER6. Do not call the offline
- * twice. This is the adapter hardware error path.
+ * failure is a value other than FFER6. Do not call the offline
+ * twice. This is the adapter hardware error path.
*/
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0457 Adapter Hardware Error "
@@ -873,6 +901,7 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
lpfc_offline_eratt(phba);
}
+ return;
}
/**
@@ -1656,6 +1685,7 @@ lpfc_stop_phba_timers(struct lpfc_hba *phba)
del_timer_sync(&phba->fabric_block_timer);
phba->hb_outstanding = 0;
del_timer_sync(&phba->hb_tmofunc);
+ del_timer_sync(&phba->eratt_poll);
return;
}
@@ -2172,30 +2202,97 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost)
static int
lpfc_enable_msix(struct lpfc_hba *phba)
{
- int error;
+ int rc, i;
+ LPFC_MBOXQ_t *pmb;
- phba->msix_entries[0].entry = 0;
- phba->msix_entries[0].vector = 0;
+ /* Set up MSI-X multi-message vectors */
+ for (i = 0; i < LPFC_MSIX_VECTORS; i++)
+ phba->msix_entries[i].entry = i;
- error = pci_enable_msix(phba->pcidev, phba->msix_entries,
+ /* Configure MSI-X capability structure */
+ rc = pci_enable_msix(phba->pcidev, phba->msix_entries,
ARRAY_SIZE(phba->msix_entries));
- if (error) {
+ if (rc) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0420 Enable MSI-X failed (%d), continuing "
- "with MSI\n", error);
- pci_disable_msix(phba->pcidev);
- return error;
+ "with MSI\n", rc);
+ goto msi_fail_out;
+ } else
+ for (i = 0; i < LPFC_MSIX_VECTORS; i++)
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0477 MSI-X entry[%d]: vector=x%x "
+ "message=%d\n", i,
+ phba->msix_entries[i].vector,
+ phba->msix_entries[i].entry);
+ /*
+ * Assign MSI-X vectors to interrupt handlers
+ */
+
+ /* vector-0 is associated to slow-path handler */
+ rc = request_irq(phba->msix_entries[0].vector, &lpfc_sp_intr_handler,
+ IRQF_SHARED, LPFC_SP_DRIVER_HANDLER_NAME, phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0421 MSI-X slow-path request_irq failed "
+ "(%d), continuing with MSI\n", rc);
+ goto msi_fail_out;
}
- error = request_irq(phba->msix_entries[0].vector, lpfc_intr_handler, 0,
- LPFC_DRIVER_NAME, phba);
- if (error) {
+ /* vector-1 is associated to fast-path handler */
+ rc = request_irq(phba->msix_entries[1].vector, &lpfc_fp_intr_handler,
+ IRQF_SHARED, LPFC_FP_DRIVER_HANDLER_NAME, phba);
+
+ if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0421 MSI-X request_irq failed (%d), "
- "continuing with MSI\n", error);
- pci_disable_msix(phba->pcidev);
+ "0429 MSI-X fast-path request_irq failed "
+ "(%d), continuing with MSI\n", rc);
+ goto irq_fail_out;
}
- return error;
+
+ /*
+ * Configure HBA MSI-X attention conditions to messages
+ */
+ pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+
+ if (!pmb) {
+ rc = -ENOMEM;
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0474 Unable to allocate memory for issuing "
+ "MBOX_CONFIG_MSI command\n");
+ goto mem_fail_out;
+ }
+ rc = lpfc_config_msi(phba, pmb);
+ if (rc)
+ goto mbx_fail_out;
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "0351 Config MSI mailbox command failed, "
+ "mbxCmd x%x, mbxStatus x%x\n",
+ pmb->mb.mbxCommand, pmb->mb.mbxStatus);
+ goto mbx_fail_out;
+ }
+
+ /* Free memory allocated for mailbox command */
+ mempool_free(pmb, phba->mbox_mem_pool);
+ return rc;
+
+mbx_fail_out:
+ /* Free memory allocated for mailbox command */
+ mempool_free(pmb, phba->mbox_mem_pool);
+
+mem_fail_out:
+ /* free the irq already requested */
+ free_irq(phba->msix_entries[1].vector, phba);
+
+irq_fail_out:
+ /* free the irq already requested */
+ free_irq(phba->msix_entries[0].vector, phba);
+
+msi_fail_out:
+ /* Unconfigure MSI-X capability structure */
+ pci_disable_msix(phba->pcidev);
+ return rc;
}
/**
@@ -2208,7 +2305,12 @@ lpfc_enable_msix(struct lpfc_hba *phba)
static void
lpfc_disable_msix(struct lpfc_hba *phba)
{
- free_irq(phba->msix_entries[0].vector, phba);
+ int i;
+
+ /* Free up MSI-X multi-message vectors */
+ for (i = 0; i < LPFC_MSIX_VECTORS; i++)
+ free_irq(phba->msix_entries[i].vector, phba);
+ /* Disable MSI-X */
pci_disable_msix(phba->pcidev);
}
@@ -2288,6 +2390,9 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
init_timer(&phba->fabric_block_timer);
phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
phba->fabric_block_timer.data = (unsigned long) phba;
+ init_timer(&phba->eratt_poll);
+ phba->eratt_poll.function = lpfc_poll_eratt;
+ phba->eratt_poll.data = (unsigned long) phba;
pci_set_master(pdev);
pci_try_set_mwi(pdev);
@@ -2307,7 +2412,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
bar2map_len = pci_resource_len(phba->pcidev, 2);
/* Map HBA SLIM to a kernel virtual address. */
- phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
+ phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
if (!phba->slim_memmap_p) {
error = -ENODEV;
dev_printk(KERN_ERR, &pdev->dev,
@@ -2405,7 +2510,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
phba->fc_arbtov = FF_DEF_ARBTOV;
INIT_LIST_HEAD(&phba->work_list);
- phba->work_ha_mask = (HA_ERATT|HA_MBATT|HA_LATT);
+ phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
/* Initialize the wait queue head for the kernel thread */
@@ -2440,21 +2545,42 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
pci_set_drvdata(pdev, shost);
phba->intr_type = NONE;
+ phba->MBslimaddr = phba->slim_memmap_p;
+ phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
+ phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
+ phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
+ phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
+
+ /* Configure and enable interrupt */
if (phba->cfg_use_msi == 2) {
- error = lpfc_enable_msix(phba);
- if (!error)
- phba->intr_type = MSIX;
+ /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
+ error = lpfc_sli_config_port(phba, 3);
+ if (error)
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0427 Firmware not capable of SLI 3 mode.\n");
+ else {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0426 Firmware capable of SLI 3 mode.\n");
+ /* Now, try to enable MSI-X interrupt mode */
+ error = lpfc_enable_msix(phba);
+ if (!error) {
+ phba->intr_type = MSIX;
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0430 enable MSI-X mode.\n");
+ }
+ }
}
/* Fallback to MSI if MSI-X initialization failed */
if (phba->cfg_use_msi >= 1 && phba->intr_type == NONE) {
retval = pci_enable_msi(phba->pcidev);
- if (!retval)
+ if (!retval) {
phba->intr_type = MSI;
- else
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0452 Enable MSI failed, continuing "
- "with IRQ\n");
+ "0473 enable MSI mode.\n");
+ } else
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0452 enable IRQ mode.\n");
}
/* MSI-X is the only case the doesn't need to call request_irq */
@@ -2470,18 +2596,16 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
phba->intr_type = INTx;
}
- phba->MBslimaddr = phba->slim_memmap_p;
- phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
- phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
- phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
- phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
-
if (lpfc_alloc_sysfs_attr(vport)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1476 Failed to allocate sysfs attr\n");
error = -ENOMEM;
goto out_free_irq;
}
if (lpfc_sli_hba_setup(phba)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1477 Failed to set up hba\n");
error = -ENODEV;
goto out_remove_device;
}
@@ -2500,6 +2624,8 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
spin_unlock_irq(shost->host_lock);
}
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0428 Perform SCSI scan\n");
scsi_scan_host(shost);
return 0;
@@ -2732,20 +2858,34 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
/* Enable configured interrupt method */
phba->intr_type = NONE;
if (phba->cfg_use_msi == 2) {
- error = lpfc_enable_msix(phba);
- if (!error)
- phba->intr_type = MSIX;
+ /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
+ error = lpfc_sli_config_port(phba, 3);
+ if (error)
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0478 Firmware not capable of SLI 3 mode.\n");
+ else {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0479 Firmware capable of SLI 3 mode.\n");
+ /* Now, try to enable MSI-X interrupt mode */
+ error = lpfc_enable_msix(phba);
+ if (!error) {
+ phba->intr_type = MSIX;
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0480 enable MSI-X mode.\n");
+ }
+ }
}
/* Fallback to MSI if MSI-X initialization failed */
if (phba->cfg_use_msi >= 1 && phba->intr_type == NONE) {
retval = pci_enable_msi(phba->pcidev);
- if (!retval)
+ if (!retval) {
phba->intr_type = MSI;
- else
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0470 Enable MSI failed, continuing "
- "with IRQ\n");
+ "0481 enable MSI mode.\n");
+ } else
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0470 enable IRQ mode.\n");
}
/* MSI-X is the only case the doesn't need to call request_irq */
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index ca358355ec9..65bc8e1a5f7 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2007 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2008 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -272,6 +272,84 @@ lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
}
/**
+ * lpfc_config_msi: Prepare a mailbox command for configuring msi-x.
+ * @phba: pointer to lpfc hba data structure.
+ * @pmb: pointer to the driver internal queue element for mailbox command.
+ *
+ * The configure MSI-X mailbox command is used to configure the HBA's SLI-3
+ * MSI-X multi-message interrupt vector association to interrupt attention
+ * conditions.
+ *
+ * Return codes
+ * 0 - Success
+ * -EINVAL - Failure
+ **/
+int
+lpfc_config_msi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
+{
+ MAILBOX_t *mb = &pmb->mb;
+ uint32_t attentionConditions[2];
+
+ /* Sanity check */
+ if (phba->cfg_use_msi != 2) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0475 Not configured for supporting MSI-X "
+ "cfg_use_msi: 0x%x\n", phba->cfg_use_msi);
+ return -EINVAL;
+ }
+
+ if (phba->sli_rev < 3) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0476 HBA not supporting SLI-3 or later "
+ "SLI Revision: 0x%x\n", phba->sli_rev);
+ return -EINVAL;
+ }
+
+ /* Clear mailbox command fields */
+ memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
+
+ /*
+ * SLI-3, Message Signaled Interrupt Fearure.
+ */
+
+ /* Multi-message attention configuration */
+ attentionConditions[0] = (HA_R0ATT | HA_R1ATT | HA_R2ATT | HA_ERATT |
+ HA_LATT | HA_MBATT);
+ attentionConditions[1] = 0;
+
+ mb->un.varCfgMSI.attentionConditions[0] = attentionConditions[0];
+ mb->un.varCfgMSI.attentionConditions[1] = attentionConditions[1];
+
+ /*
+ * Set up message number to HA bit association
+ */
+#ifdef __BIG_ENDIAN_BITFIELD
+ /* RA0 (FCP Ring) */
+ mb->un.varCfgMSI.messageNumberByHA[HA_R0_POS] = 1;
+ /* RA1 (Other Protocol Extra Ring) */
+ mb->un.varCfgMSI.messageNumberByHA[HA_R1_POS] = 1;
+#else /* __LITTLE_ENDIAN_BITFIELD */
+ /* RA0 (FCP Ring) */
+ mb->un.varCfgMSI.messageNumberByHA[HA_R0_POS^3] = 1;
+ /* RA1 (Other Protocol Extra Ring) */
+ mb->un.varCfgMSI.messageNumberByHA[HA_R1_POS^3] = 1;
+#endif
+ /* Multi-message interrupt autoclear configuration*/
+ mb->un.varCfgMSI.autoClearHA[0] = attentionConditions[0];
+ mb->un.varCfgMSI.autoClearHA[1] = attentionConditions[1];
+
+ /* For now, HBA autoclear does not work reliably, disable it */
+ mb->un.varCfgMSI.autoClearHA[0] = 0;
+ mb->un.varCfgMSI.autoClearHA[1] = 0;
+
+ /* Set command and owner bit */
+ mb->mbxCommand = MBX_CONFIG_MSI;
+ mb->mbxOwner = OWN_HOST;
+
+ return 0;
+}
+
+/**
* lpfc_init_link: Prepare a mailbox command for initialize link on a HBA.
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 1812e18246d..2cca39e9b93 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1699,6 +1699,36 @@ lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
}
/**
+ * lpfc_poll_eratt: Error attention polling timer timeout handler.
+ * @ptr: Pointer to address of HBA context object.
+ *
+ * This function is invoked by the Error Attention polling timer when the
+ * timer times out. It will check the SLI Error Attention register for
+ * possible attention events. If so, it will post an Error Attention event
+ * and wake up worker thread to process it. Otherwise, it will set up the
+ * Error Attention polling timer for the next poll.
+ **/
+void lpfc_poll_eratt(unsigned long ptr)
+{
+ struct lpfc_hba *phba;
+ uint32_t eratt = 0;
+
+ phba = (struct lpfc_hba *)ptr;
+
+ /* Check chip HA register for error event */
+ eratt = lpfc_sli_check_eratt(phba);
+
+ if (eratt)
+ /* Tell the worker thread there is work to do */
+ lpfc_worker_wake_up(phba);
+ else
+ /* Restart the timer for next eratt poll */
+ mod_timer(&phba->eratt_poll, jiffies +
+ HZ * LPFC_ERATT_POLL_INTERVAL);
+ return;
+}
+
+/**
* lpfc_sli_poll_fcp_ring: Handle FCP ring completion in polling mode.
* @phba: Pointer to HBA context object.
*
@@ -3011,7 +3041,7 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba)
}
/**
- * lpfc_do_config_port: Issue config port mailbox command.
+ * lpfc_sli_config_port: Issue config port mailbox command.
* @phba: Pointer to HBA context object.
* @sli_mode: sli mode - 2/3
*
@@ -3023,8 +3053,8 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba)
* The function returns 0 if successful, else returns negative error
* code.
**/
-static int
-lpfc_do_config_port(struct lpfc_hba *phba, int sli_mode)
+int
+lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
{
LPFC_MBOXQ_t *pmb;
uint32_t resetcount = 0, rc = 0, done = 0;
@@ -3165,13 +3195,14 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba)
break;
}
- rc = lpfc_do_config_port(phba, mode);
+ rc = lpfc_sli_config_port(phba, mode);
+
if (rc && lpfc_sli_mode == 3)
lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_VPORT,
"1820 Unable to select SLI-3. "
"Not supported by adapter.\n");
if (rc && mode != 2)
- rc = lpfc_do_config_port(phba, 2);
+ rc = lpfc_sli_config_port(phba, 2);
if (rc)
goto lpfc_sli_hba_setup_error;
@@ -3192,8 +3223,7 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba)
if (rc)
goto lpfc_sli_hba_setup_error;
- /* Init HBQs */
-
+ /* Init HBQs */
if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) {
rc = lpfc_sli_hbq_setup(phba);
if (rc)
@@ -5128,28 +5158,73 @@ lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba)
}
/**
- * lpfc_intr_handler: The interrupt handler of lpfc driver.
+ * lpfc_sli_check_eratt: check error attention events
+ * @phba: Pointer to HBA context.
+ *
+ * This function is called form timer soft interrupt context to check HBA's
+ * error attention register bit for error attention events.
+ *
+ * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * Register and returns 0 otherwise.
+ **/
+int
+lpfc_sli_check_eratt(struct lpfc_hba *phba)
+{
+ uint32_t ha_copy;
+
+ /* If somebody is waiting to handle an eratt, don't process it
+ * here. The brdkill function will do this.
+ */
+ if (phba->link_flag & LS_IGNORE_ERATT)
+ return 0;
+
+ /* Check if interrupt handler handles this ERATT */
+ spin_lock_irq(&phba->hbalock);
+ if (phba->hba_flag & HBA_ERATT_HANDLED) {
+ /* Interrupt handler has handled ERATT */
+ spin_unlock_irq(&phba->hbalock);
+ return 0;
+ }
+
+ /* Read chip Host Attention (HA) register */
+ ha_copy = readl(phba->HAregaddr);
+ if (ha_copy & HA_ERATT) {
+ /* Read host status register to retrieve error event */
+ lpfc_sli_read_hs(phba);
+ /* Set the driver HA work bitmap */
+ phba->work_ha |= HA_ERATT;
+ /* Indicate polling handles this ERATT */
+ phba->hba_flag |= HBA_ERATT_HANDLED;
+ spin_unlock_irq(&phba->hbalock);
+ return 1;
+ }
+ spin_unlock_irq(&phba->hbalock);
+ return 0;
+}
+
+/**
+ * lpfc_sp_intr_handler: The slow-path interrupt handler of lpfc driver.
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
- * This function is called from the PCI layer when there is
- * an event in the HBA which requires driver attention. When
- * the PCI slot is in error recovery or the HBA is undergoing
- * initialization the interrupt handler will not process the
- * interrupt.
- * The error attention, link attention and els ring attention
- * events are handled by the worker thread. The interrupt
- * handler signals the worker thread and returns for these
- * events.
- * The SCSI ring event and mailbox events are handled in the
- * interrupt context.
- * This function is called without any lock held. It gets the
- * hbalock to access and update SLI data structures.
- * This function returns IRQ_HANDLED when interrupt is handled
- * else it returns IRQ_NONE.
+ * This function is directly called from the PCI layer as an interrupt
+ * service routine when the device is enabled with MSI-X multi-message
+ * interrupt mode and there are slow-path events in the HBA. However,
+ * when the device is enabled with either MSI or Pin-IRQ interrupt mode,
+ * this function is called as part of the device-level interrupt handler.
+ * When the PCI slot is in error recovery or the HBA is undergoing
+ * initialization, the interrupt handler will not process the interrupt.
+ * The link attention and ELS ring attention events are handled by the
+ * worker thread. The interrupt handler signals the worker thread and
+ * and returns for these events. This function is called without any
+ * lock held. It gets the hbalock to access and update SLI data
+ * structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled else it
+ * returns IRQ_NONE.
**/
irqreturn_t
-lpfc_intr_handler(int irq, void *dev_id)
+lpfc_sp_intr_handler(int irq, void *dev_id)
{
struct lpfc_hba *phba;
uint32_t ha_copy;
@@ -5168,54 +5243,52 @@ lpfc_intr_handler(int irq, void *dev_id)
* Get the driver's phba structure from the dev_id and
* assume the HBA is not interrupting.
*/
- phba = (struct lpfc_hba *) dev_id;
+ phba = (struct lpfc_hba *)dev_id;
if (unlikely(!phba))
return IRQ_NONE;
- /* If the pci channel is offline, ignore all the interrupts. */
- if (unlikely(pci_channel_offline(phba->pcidev)))
- return IRQ_NONE;
-
- phba->sli.slistat.sli_intr++;
-
/*
- * Call the HBA to see if it is interrupting. If not, don't claim
- * the interrupt
+ * Stuff needs to be attented to when this function is invoked as an
+ * individual interrupt handler in MSI-X multi-message interrupt mode
*/
-
- /* Ignore all interrupts during initialization. */
- if (unlikely(phba->link_state < LPFC_LINK_DOWN))
- return IRQ_NONE;
-
- /*
- * Read host attention register to determine interrupt source
- * Clear Attention Sources, except Error Attention (to
- * preserve status) and Link Attention
- */
- spin_lock(&phba->hbalock);
- if (phba->sli3_options & LPFC_SLI3_INB_ENABLED &&
- (phba->inb_last_counter != *phba->inb_counter)) {
- phba->inb_last_counter = *phba->inb_counter;
- ha_copy = le32_to_cpu(*phba->inb_ha_copy);
- } else
+ if (phba->intr_type == MSIX) {
+ /* If the pci channel is offline, ignore all the interrupts */
+ if (unlikely(pci_channel_offline(phba->pcidev)))
+ return IRQ_NONE;
+ /* Update device-level interrupt statistics */
+ phba->sli.slistat.sli_intr++;
+ /* Ignore all interrupts during initialization. */
+ if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+ return IRQ_NONE;
+ /* Need to read HA REG for slow-path events */
+ spin_lock(&phba->hbalock);
ha_copy = readl(phba->HAregaddr);
- if (unlikely(!ha_copy)) {
+ /* If somebody is waiting to handle an eratt don't process it
+ * here. The brdkill function will do this.
+ */
+ if (phba->link_flag & LS_IGNORE_ERATT)
+ ha_copy &= ~HA_ERATT;
+ /* Check the need for handling ERATT in interrupt handler */
+ if (ha_copy & HA_ERATT) {
+ if (phba->hba_flag & HBA_ERATT_HANDLED)
+ /* ERATT polling has handled ERATT */
+ ha_copy &= ~HA_ERATT;
+ else
+ /* Indicate interrupt handler handles ERATT */
+ phba->hba_flag |= HBA_ERATT_HANDLED;
+ }
+ /* Clear up only attention source related to slow-path */
+ writel((ha_copy & (HA_MBATT | HA_R2_CLR_MSK)),
+ phba->HAregaddr);
+ readl(phba->HAregaddr); /* flush */
spin_unlock(&phba->hbalock);
- return IRQ_NONE;
- }
- /* If somebody is waiting to handle an eratt don't process it
- * here. The brdkill function will do this.
- */
- if (phba->link_flag & LS_IGNORE_ERATT)
- ha_copy &= ~HA_ERATT;
- writel((ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr);
- readl(phba->HAregaddr); /* flush */
- spin_unlock(&phba->hbalock);
+ } else
+ ha_copy = phba->ha_copy;
work_ha_copy = ha_copy & phba->work_ha_mask;
- if (unlikely(work_ha_copy)) {
+ if (work_ha_copy) {
if (work_ha_copy & HA_LATT) {
if (phba->sli.sli_flag & LPFC_PROCESS_LA) {
/*
@@ -5234,7 +5307,7 @@ lpfc_intr_handler(int irq, void *dev_id)
work_ha_copy &= ~HA_LATT;
}
- if (work_ha_copy & ~(HA_ERATT|HA_MBATT|HA_LATT)) {
+ if (work_ha_copy & ~(HA_ERATT | HA_MBATT | HA_LATT)) {
/*
* Turn off Slow Rings interrupts, LPFC_ELS_RING is
* the only slow ring.
@@ -5275,28 +5348,10 @@ lpfc_intr_handler(int irq, void *dev_id)
spin_unlock(&phba->hbalock);
}
}
-
- if (work_ha_copy & HA_ERATT) {
- /*
- * There was a link/board error. Read the
- * status register to retrieve the error event
- * and process it.
- */
- phba->sli.slistat.err_attn_event++;
- /* Save status info */
- phba->work_hs = readl(phba->HSregaddr);
- phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
- phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
-
- /* Clear Chip error bit */
- writel(HA_ERATT, phba->HAregaddr);
- readl(phba->HAregaddr); /* flush */
- phba->pport->stopped = 1;
- }
-
spin_lock(&phba->hbalock);
- if ((work_ha_copy & HA_MBATT) &&
- (phba->sli.mbox_active)) {
+ if (work_ha_copy & HA_ERATT)
+ lpfc_sli_read_hs(phba);
+ if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) {
pmb = phba->sli.mbox_active;
pmbox = &pmb->mb;
mbox = phba->mbox;
@@ -5379,6 +5434,7 @@ lpfc_intr_handler(int irq, void *dev_id)
}
} else
spin_unlock(&phba->hbalock);
+
if ((work_ha_copy & HA_MBATT) &&
(phba->sli.mbox_active == NULL)) {
send_current_mbox:
@@ -5398,15 +5454,74 @@ send_current_mbox:
spin_unlock(&phba->hbalock);
lpfc_worker_wake_up(phba);
}
+ return IRQ_HANDLED;
- ha_copy &= ~(phba->work_ha_mask);
+} /* lpfc_sp_intr_handler */
+
+/**
+ * lpfc_fp_intr_handler: The fast-path interrupt handler of lpfc driver.
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is directly called from the PCI layer as an interrupt
+ * service routine when the device is enabled with MSI-X multi-message
+ * interrupt mode and there is a fast-path FCP IOCB ring event in the
+ * HBA. However, when the device is enabled with either MSI or Pin-IRQ
+ * interrupt mode, this function is called as part of the device-level
+ * interrupt handler. When the PCI slot is in error recovery or the HBA
+ * is undergoing initialization, the interrupt handler will not process
+ * the interrupt. The SCSI FCP fast-path ring event are handled in the
+ * intrrupt context. This function is called without any lock held. It
+ * gets the hbalock to access and update SLI data structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_fp_intr_handler(int irq, void *dev_id)
+{
+ struct lpfc_hba *phba;
+ uint32_t ha_copy;
+ unsigned long status;
+
+ /* Get the driver's phba structure from the dev_id and
+ * assume the HBA is not interrupting.
+ */
+ phba = (struct lpfc_hba *) dev_id;
+
+ if (unlikely(!phba))
+ return IRQ_NONE;
+
+ /*
+ * Stuff needs to be attented to when this function is invoked as an
+ * individual interrupt handler in MSI-X multi-message interrupt mode
+ */
+ if (phba->intr_type == MSIX) {
+ /* If pci channel is offline, ignore all the interrupts */
+ if (unlikely(pci_channel_offline(phba->pcidev)))
+ return IRQ_NONE;
+ /* Update device-level interrupt statistics */
+ phba->sli.slistat.sli_intr++;
+ /* Ignore all interrupts during initialization. */
+ if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+ return IRQ_NONE;
+ /* Need to read HA REG for FCP ring and other ring events */
+ ha_copy = readl(phba->HAregaddr);
+ /* Clear up only attention source related to fast-path */
+ spin_lock(&phba->hbalock);
+ writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)),
+ phba->HAregaddr);
+ readl(phba->HAregaddr); /* flush */
+ spin_unlock(&phba->hbalock);
+ } else
+ ha_copy = phba->ha_copy;
/*
- * Process all events on FCP ring. Take the optimized path for
- * FCP IO. Any other IO is slow path and is handled by
- * the worker thread.
+ * Process all events on FCP ring. Take the optimized path for FCP IO.
*/
- status = (ha_copy & (HA_RXMASK << (4*LPFC_FCP_RING)));
+ ha_copy &= ~(phba->work_ha_mask);
+
+ status = (ha_copy & (HA_RXMASK << (4*LPFC_FCP_RING)));
status >>= (4*LPFC_FCP_RING);
if (status & HA_RXMASK)
lpfc_sli_handle_fast_ring_event(phba,
@@ -5415,11 +5530,10 @@ send_current_mbox:
if (phba->cfg_multi_ring_support == 2) {
/*
- * Process all events on extra ring. Take the optimized path
- * for extra ring IO. Any other IO is slow path and is handled
- * by the worker thread.
+ * Process all events on extra ring. Take the optimized path
+ * for extra ring IO.
*/
- status = (ha_copy & (HA_RXMASK << (4*LPFC_EXTRA_RING)));
+ status = (ha_copy & (HA_RXMASK << (4*LPFC_EXTRA_RING)));
status >>= (4*LPFC_EXTRA_RING);
if (status & HA_RXMASK) {
lpfc_sli_handle_fast_ring_event(phba,
@@ -5428,5 +5542,106 @@ send_current_mbox:
}
}
return IRQ_HANDLED;
+} /* lpfc_fp_intr_handler */
+
+/**
+ * lpfc_intr_handler: The device-level interrupt handler of lpfc driver.
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is the device-level interrupt handler called from the PCI
+ * layer when either MSI or Pin-IRQ interrupt mode is enabled and there is
+ * an event in the HBA which requires driver attention. This function
+ * invokes the slow-path interrupt attention handling function and fast-path
+ * interrupt attention handling function in turn to process the relevant
+ * HBA attention events. This function is called without any lock held. It
+ * gets the hbalock to access and update SLI data structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled, else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_intr_handler(int irq, void *dev_id)
+{
+ struct lpfc_hba *phba;
+ irqreturn_t sp_irq_rc, fp_irq_rc;
+ unsigned long status1, status2;
+
+ /*
+ * Get the driver's phba structure from the dev_id and
+ * assume the HBA is not interrupting.
+ */
+ phba = (struct lpfc_hba *) dev_id;
+
+ if (unlikely(!phba))
+ return IRQ_NONE;
+
+ /* If the pci channel is offline, ignore all the interrupts. */
+ if (unlikely(pci_channel_offline(phba->pcidev)))
+ return IRQ_NONE;
+
+ /* Update device level interrupt statistics */
+ phba->sli.slistat.sli_intr++;
+
+ /* Ignore all interrupts during initialization. */
+ if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+ return IRQ_NONE;
+
+ spin_lock(&phba->hbalock);
+ phba->ha_copy = readl(phba->HAregaddr);
+ if (unlikely(!phba->ha_copy)) {
+ spin_unlock(&phba->hbalock);
+ return IRQ_NONE;
+ } else if (phba->ha_copy & HA_ERATT) {
+ if (phba->hba_flag & HBA_ERATT_HANDLED)
+ /* ERATT polling has handled ERATT */
+ phba->ha_copy &= ~HA_ERATT;
+ else
+ /* Indicate interrupt handler handles ERATT */
+ phba->hba_flag |= HBA_ERATT_HANDLED;
+ }
+
+ /* Clear attention sources except link and error attentions */
+ writel((phba->ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr);
+ readl(phba->HAregaddr); /* flush */
+ spin_unlock(&phba->hbalock);
+
+ /*
+ * Invokes slow-path host attention interrupt handling as appropriate.
+ */
+
+ /* status of events with mailbox and link attention */
+ status1 = phba->ha_copy & (HA_MBATT | HA_LATT | HA_ERATT);
+
+ /* status of events with ELS ring */
+ status2 = (phba->ha_copy & (HA_RXMASK << (4*LPFC_ELS_RING)));
+ status2 >>= (4*LPFC_ELS_RING);
+
+ if (status1 || (status2 & HA_RXMASK))
+ sp_irq_rc = lpfc_sp_intr_handler(irq, dev_id);
+ else
+ sp_irq_rc = IRQ_NONE;
+
+ /*
+ * Invoke fast-path host attention interrupt handling as appropriate.
+ */
+
+ /* status of events with FCP ring */
+ status1 = (phba->ha_copy & (HA_RXMASK << (4*LPFC_FCP_RING)));
+ status1 >>= (4*LPFC_FCP_RING);
+
+ /* status of events with extra ring */
+ if (phba->cfg_multi_ring_support == 2) {
+ status2 = (phba->ha_copy & (HA_RXMASK << (4*LPFC_EXTRA_RING)));
+ status2 >>= (4*LPFC_EXTRA_RING);
+ } else
+ status2 = 0;
+
+ if ((status1 & HA_RXMASK) || (status2 & HA_RXMASK))
+ fp_irq_rc = lpfc_fp_intr_handler(irq, dev_id);
+ else
+ fp_irq_rc = IRQ_NONE;
-} /* lpfc_intr_handler */
+ /* Return device-level interrupt handling status */
+ return (sp_irq_rc == IRQ_HANDLED) ? sp_irq_rc : fp_irq_rc;
+} /* lpfc_intr_handler */
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index ad24cacfbe1..1a62e57a6a2 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -20,7 +20,9 @@
#define LPFC_DRIVER_VERSION "8.2.7"
-#define LPFC_DRIVER_NAME "lpfc"
+#define LPFC_DRIVER_NAME "lpfc"
+#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp"
+#define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp"
#define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \
LPFC_DRIVER_VERSION