aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorJean Delvare <khali@linux-fr.org>2005-08-09 20:17:55 +0200
committerGreg Kroah-Hartman <gregkh@suse.de>2005-09-05 09:14:25 -0700
commita89ba0bc02e82920a0f4137aa5d655ac0366cc28 (patch)
tree98489ed77a287a81ff4ad7233fd543e59e58c328 /drivers
parent3b6c0634cc989f0735a1541ccf9288947685cab5 (diff)
[PATCH] I2C: Rewrite i2c_probe
i2c_probe was quite complex and slow, so I rewrote it in a more efficient and hopefully clearer way. Note that this slightly changes the way the module parameters are handled. This shouldn't change anything for the most common cases though. For one thing, the function now respects the order of the parameters for address probing. It used to always do lower addresses first. The new approach gives the user more control. For another, ignore addresses don't overrule probe addresses anymore. This could have been restored the way it was at the cost of a few more lines of code, but I don't think it's worth it. Both lists are given as module parameters, so a user would be quite silly to specify the same addresses in both lists. The normal addresses list is the only one that isn't controlled by a module parameter, thus is the only one the user may reasonably want to remove an address from. Another significant change is the fact that i2c_probe() will no more stop when a detection function returns -ENODEV. Just because a driver found a chip it doesn't support isn't a valid reason to stop all probings for this one driver. This closes the long standing lm_sensors ticket #1807. http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1807 I updated the documentation accordingly. In terms of algorithmic complexity, the new code is way better. If I is the ignore address count, P the probe address count, N the normal address count and F the force address count, the old code was doing 128 * (F + I + P + N) iterations max, while the new code does F + P + ((I+1) * N) iterations max. For the most common case where F, I and P are empty, this is down from 128 * N to N. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/i2c/i2c-core.c165
1 files changed, 89 insertions, 76 deletions
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 372b5996d04..bee0148dfab 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -662,107 +662,120 @@ int i2c_control(struct i2c_client *client,
* Will not work for 10-bit addresses!
* ----------------------------------------------------
*/
-/* Return: kind (>= 0) if force found, -1 if not found */
-static inline int i2c_probe_forces(struct i2c_adapter *adapter, int addr,
- unsigned short **forces)
+static int i2c_probe_address(struct i2c_adapter *adapter, int addr, int kind,
+ int (*found_proc) (struct i2c_adapter *, int, int))
{
- unsigned short kind;
- int j, adap_id = i2c_adapter_id(adapter);
-
- for (kind = 0; forces[kind]; kind++) {
- for (j = 0; forces[kind][j] != I2C_CLIENT_END; j += 2) {
- if ((forces[kind][j] == adap_id ||
- forces[kind][j] == ANY_I2C_BUS)
- && forces[kind][j + 1] == addr) {
- dev_dbg(&adapter->dev, "found force parameter, "
- "addr 0x%02x, kind %u\n", addr, kind);
- return kind;
- }
- }
+ int err;
+
+ /* Make sure the address is valid */
+ if (addr < 0x03 || addr > 0x77) {
+ dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n",
+ addr);
+ return -EINVAL;
}
- return -1;
+ /* Skip if already in use */
+ if (i2c_check_addr(adapter, addr))
+ return 0;
+
+ /* Make sure there is something at this address, unless forced */
+ if (kind < 0
+ && i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL) < 0)
+ return 0;
+
+ /* Finally call the custom detection function */
+ err = found_proc(adapter, addr, kind);
+
+ /* -ENODEV can be returned if there is a chip at the given address
+ but it isn't supported by this chip driver. We catch it here as
+ this isn't an error. */
+ return (err == -ENODEV) ? 0 : err;
}
int i2c_probe(struct i2c_adapter *adapter,
struct i2c_client_address_data *address_data,
int (*found_proc) (struct i2c_adapter *, int, int))
{
- int addr,i,found,err;
+ int i, err;
int adap_id = i2c_adapter_id(adapter);
/* Forget it if we can't probe using SMBUS_QUICK */
if (! i2c_check_functionality(adapter,I2C_FUNC_SMBUS_QUICK))
return -1;
- for (addr = 0x00; addr <= 0x7f; addr++) {
-
- /* Skip if already in use */
- if (i2c_check_addr(adapter,addr))
- continue;
-
- /* If it is in one of the force entries, we don't do any detection
- at all */
- found = 0;
-
- if (address_data->forces) {
- int kind = i2c_probe_forces(adapter, addr,
- address_data->forces);
- if (kind >= 0) { /* force found */
- if ((err = found_proc(adapter, addr, kind)))
- return err;
- continue;
- }
- }
-
- /* If this address is in one of the ignores, we can forget about
- it right now */
- for (i = 0;
- !found && (address_data->ignore[i] != I2C_CLIENT_END);
- i += 2) {
- if (((adap_id == address_data->ignore[i]) ||
- ((address_data->ignore[i] == ANY_I2C_BUS))) &&
- (addr == address_data->ignore[i+1])) {
- dev_dbg(&adapter->dev, "found ignore parameter for adapter %d, "
- "addr %04x\n", adap_id ,addr);
- found = 1;
+ /* Force entries are done first, and are not affected by ignore
+ entries */
+ if (address_data->forces) {
+ unsigned short **forces = address_data->forces;
+ int kind;
+
+ for (kind = 0; forces[kind]; kind++) {
+ for (i = 0; forces[kind][i] != I2C_CLIENT_END;
+ i += 2) {
+ if (forces[kind][i] == adap_id
+ || forces[kind][i] == ANY_I2C_BUS) {
+ dev_dbg(&adapter->dev, "found force "
+ "parameter for adapter %d, "
+ "addr 0x%02x, kind %d\n",
+ adap_id, forces[kind][i + 1],
+ kind);
+ err = i2c_probe_address(adapter,
+ forces[kind][i + 1],
+ kind, found_proc);
+ if (err)
+ return err;
+ }
}
}
- if (found)
- continue;
+ }
- /* Now, we will do a detection, but only if it is in the normal or
- probe entries */
- for (i = 0;
- !found && (address_data->normal_i2c[i] != I2C_CLIENT_END);
- i += 1) {
- if (addr == address_data->normal_i2c[i]) {
- found = 1;
- dev_dbg(&adapter->dev, "found normal i2c entry for adapter %d, "
- "addr %02x\n", adap_id, addr);
- }
+ /* Probe entries are done second, and are not affected by ignore
+ entries either */
+ for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) {
+ if (address_data->probe[i] == adap_id
+ || address_data->probe[i] == ANY_I2C_BUS) {
+ dev_dbg(&adapter->dev, "found probe parameter for "
+ "adapter %d, addr 0x%02x\n", adap_id,
+ address_data->probe[i + 1]);
+ err = i2c_probe_address(adapter,
+ address_data->probe[i + 1],
+ -1, found_proc);
+ if (err)
+ return err;
}
+ }
- for (i = 0;
- !found && (address_data->probe[i] != I2C_CLIENT_END);
- i += 2) {
- if (((adap_id == address_data->probe[i]) ||
- ((address_data->probe[i] == ANY_I2C_BUS))) &&
- (addr == address_data->probe[i+1])) {
- found = 1;
- dev_dbg(&adapter->dev, "found probe parameter for adapter %d, "
- "addr %04x\n", adap_id,addr);
+ /* Normal entries are done last, unless shadowed by an ignore entry */
+ for (i = 0; address_data->normal_i2c[i] != I2C_CLIENT_END; i += 1) {
+ int j, ignore;
+
+ ignore = 0;
+ for (j = 0; address_data->ignore[j] != I2C_CLIENT_END;
+ j += 2) {
+ if ((address_data->ignore[j] == adap_id ||
+ address_data->ignore[j] == ANY_I2C_BUS)
+ && address_data->ignore[j + 1]
+ == address_data->normal_i2c[i]) {
+ dev_dbg(&adapter->dev, "found ignore "
+ "parameter for adapter %d, "
+ "addr 0x%02x\n", adap_id,
+ address_data->ignore[j + 1]);
}
+ ignore = 1;
+ break;
}
- if (!found)
+ if (ignore)
continue;
- /* OK, so we really should examine this address. First check
- whether there is some client here at all! */
- if (i2c_smbus_xfer(adapter,addr,0,0,0,I2C_SMBUS_QUICK,NULL) >= 0)
- if ((err = found_proc(adapter,addr,-1)))
- return err;
+ dev_dbg(&adapter->dev, "found normal entry for adapter %d, "
+ "addr 0x%02x\n", adap_id,
+ address_data->normal_i2c[i]);
+ err = i2c_probe_address(adapter, address_data->normal_i2c[i],
+ -1, found_proc);
+ if (err)
+ return err;
}
+
return 0;
}