Merge branch 'devel' of ssh://master.kernel.org/home/rmk/linux-2.6-arm into devel

453 files changed, 15316 insertions, 3008 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 503a908afc8..0bcf2646467 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -112,11 +112,11 @@ config ATA_PIIX
 	  If unsure, say N.
 
 config SATA_MV
-	tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	tristate "Marvell SATA support"
 	help
 	  This option enables support for the Marvell Serial ATA family.
-	  Currently supports 88SX[56]0[48][01] chips.
+	  Currently supports 88SX[56]0[48][01] PCI(-X) chips,
+	  as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 
 	  If unsure, say N.
 
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 96039671e3b..a603bbf9b1b 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -61,9 +61,14 @@
 #define EM_MSG_LED_VALUE_ON           0x00010000
 
 static int ahci_skip_host_reset;
+static int ahci_ignore_sss;
+
 module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
 MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
 
+module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
+MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
+
 static int ahci_enable_alpm(struct ata_port *ap,
 		enum link_pm policy);
 static void ahci_disable_alpm(struct ata_port *ap);
@@ -2548,6 +2553,32 @@ static void ahci_p5wdh_workaround(struct ata_host *host)
 	}
 }
 
+static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
+{
+	static const struct dmi_system_id broken_systems[] = {
+		{
+			.ident = "HP Compaq nx6310",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"),
+			},
+			/* PCI slot number of the controller */
+			.driver_data = (void *)0x1FUL,
+		},
+
+		{ }	/* terminate list */
+	};
+	const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+	if (dmi) {
+		unsigned long slot = (unsigned long)dmi->driver_data;
+		/* apply the quirk only to on-board controllers */
+		return slot == PCI_SLOT(pdev->devfn);
+	}
+
+	return false;
+}
+
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
@@ -2647,6 +2678,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
+	if (ahci_broken_system_poweroff(pdev)) {
+		pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN;
+		dev_info(&pdev->dev,
+			"quirky BIOS, skipping spindown on poweroff\n");
+	}
+
 	/* CAP.NP sometimes indicate the index of the last enabled
 	 * port, at other times, that of the last possible port, so
 	 * determining the maximum port number requires looking at
@@ -2660,8 +2697,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	host->iomap = pcim_iomap_table(pdev);
 	host->private_data = hpriv;
 
-	if (!(hpriv->cap & HOST_CAP_SSS))
+	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
 		host->flags |= ATA_HOST_PARALLEL_SCAN;
+	else
+		printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
 
 	if (pi.flags & ATA_FLAG_EM)
 		ahci_reset_em(host);
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 887d8f46a28..54961c0b2c7 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1387,6 +1387,32 @@ static void piix_iocfg_bit18_quirk(struct ata_host *host)
 	}
 }
 
+static bool piix_broken_system_poweroff(struct pci_dev *pdev)
+{
+	static const struct dmi_system_id broken_systems[] = {
+		{
+			.ident = "HP Compaq 2510p",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 2510p"),
+			},
+			/* PCI slot number of the controller */
+			.driver_data = (void *)0x1FUL,
+		},
+
+		{ }	/* terminate list */
+	};
+	const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+	if (dmi) {
+		unsigned long slot = (unsigned long)dmi->driver_data;
+		/* apply the quirk only to on-board controllers */
+		return slot == PCI_SLOT(pdev->devfn);
+	}
+
+	return false;
+}
+
 /**
  *	piix_init_one - Register PIIX ATA PCI device with kernel services
  *	@pdev: PCI device to register
@@ -1422,6 +1448,14 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 	if (!in_module_init)
 		return -ENODEV;
 
+	if (piix_broken_system_poweroff(pdev)) {
+		piix_port_info[ent->driver_data].flags |=
+				ATA_FLAG_NO_POWEROFF_SPINDOWN |
+					ATA_FLAG_NO_HIBERNATE_SPINDOWN;
+		dev_info(&pdev->dev, "quirky BIOS, skipping spindown "
+				"on poweroff and hibernation\n");
+	}
+
 	port_info[0] = piix_port_info[ent->driver_data];
 	port_info[1] = piix_port_info[ent->driver_data];
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 88c242856da..9fbf0595f3d 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -164,6 +164,11 @@ MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
 
+static bool ata_sstatus_online(u32 sstatus)
+{
+	return (sstatus & 0xf) == 0x3;
+}
+
 /**
  *	ata_link_next - link iteration helper
  *	@link: the previous link, NULL to start
@@ -1015,18 +1020,6 @@ static const char *sata_spd_string(unsigned int spd)
 	return spd_str[spd - 1];
 }
 
-void ata_dev_disable(struct ata_device *dev)
-{
-	if (ata_dev_enabled(dev)) {
-		if (ata_msg_drv(dev->link->ap))
-			ata_dev_printk(dev, KERN_WARNING, "disabled\n");
-		ata_acpi_on_disable(dev);
-		ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 |
-					     ATA_DNXFER_QUIET);
-		dev->class++;
-	}
-}
-
 static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy)
 {
 	struct ata_link *link = dev->link;
@@ -2239,6 +2232,40 @@ retry:
 	return rc;
 }
 
+static int ata_do_link_spd_horkage(struct ata_device *dev)
+{
+	struct ata_link *plink = ata_dev_phys_link(dev);
+	u32 target, target_limit;
+
+	if (!sata_scr_valid(plink))
+		return 0;
+
+	if (dev->horkage & ATA_HORKAGE_1_5_GBPS)
+		target = 1;
+	else
+		return 0;
+
+	target_limit = (1 << target) - 1;
+
+	/* if already on stricter limit, no need to push further */
+	if (plink->sata_spd_limit <= target_limit)
+		return 0;
+
+	plink->sata_spd_limit = target_limit;
+
+	/* Request another EH round by returning -EAGAIN if link is
+	 * going faster than the target speed.  Forward progress is
+	 * guaranteed by setting sata_spd_limit to target_limit above.
+	 */
+	if (plink->sata_spd > target) {
+		ata_dev_printk(dev, KERN_INFO,
+			       "applying link speed limit horkage to %s\n",
+			       sata_spd_string(target));
+		return -EAGAIN;
+	}
+	return 0;
+}
+
 static inline u8 ata_dev_knobble(struct ata_device *dev)
 {
 	struct ata_port *ap = dev->link->ap;
@@ -2329,6 +2356,10 @@ int ata_dev_configure(struct ata_device *dev)
 		return 0;
 	}
 
+	rc = ata_do_link_spd_horkage(dev);
+	if (rc)
+		return rc;
+
 	/* let ACPI work its magic */
 	rc = ata_acpi_on_devcfg(dev);
 	if (rc)
@@ -2784,7 +2815,7 @@ int ata_bus_probe(struct ata_port *ap)
 			/* This is the last chance, better to slow
 			 * down than lose it.
 			 */
-			sata_down_spd_limit(&ap->link);
+			sata_down_spd_limit(&ap->link, 0);
 			ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
 		}
 	}
@@ -2880,21 +2911,27 @@ void ata_port_disable(struct ata_port *ap)
 /**
  *	sata_down_spd_limit - adjust SATA spd limit downward
  *	@link: Link to adjust SATA spd limit for
+ *	@spd_limit: Additional limit
  *
  *	Adjust SATA spd limit of @link downward.  Note that this
  *	function only adjusts the limit.  The change must be applied
  *	using sata_set_spd().
  *
+ *	If @spd_limit is non-zero, the speed is limited to equal to or
+ *	lower than @spd_limit if such speed is supported.  If
+ *	@spd_limit is slower than any supported speed, only the lowest
+ *	supported speed is allowed.
+ *
  *	LOCKING:
  *	Inherited from caller.
  *
  *	RETURNS:
  *	0 on success, negative errno on failure
  */
-int sata_down_spd_limit(struct ata_link *link)
+int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
 {
 	u32 sstatus, spd, mask;
-	int rc, highbit;
+	int rc, bit;
 
 	if (!sata_scr_valid(link))
 		return -EOPNOTSUPP;
@@ -2903,7 +2940,7 @@ int sata_down_spd_limit(struct ata_link *link)
 	 * If not, use cached value in link->sata_spd.
 	 */
 	rc = sata_scr_read(link, SCR_STATUS, &sstatus);
-	if (rc == 0)
+	if (rc == 0 && ata_sstatus_online(sstatus))
 		spd = (sstatus >> 4) & 0xf;
 	else
 		spd = link->sata_spd;
@@ -2913,8 +2950,8 @@ int sata_down_spd_limit(struct ata_link *link)
 		return -EINVAL;
 
 	/* unconditionally mask off the highest bit */
-	highbit = fls(mask) - 1;
-	mask &= ~(1 << highbit);
+	bit = fls(mask) - 1;
+	mask &= ~(1 << bit);
 
 	/* Mask off all speeds higher than or equal to the current
 	 * one.  Force 1.5Gbps if current SPD is not available.
@@ -2928,6 +2965,15 @@ int sata_down_spd_limit(struct ata_link *link)
 	if (!mask)
 		return -EINVAL;
 
+	if (spd_limit) {
+		if (mask & ((1 << spd_limit) - 1))
+			mask &= (1 << spd_limit) - 1;
+		else {
+			bit = ffs(mask) - 1;
+			mask = 1 << bit;
+		}
+	}
+
 	link->sata_spd_limit = mask;
 
 	ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n",
@@ -4215,6 +4261,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	/* Devices that do not need bridging limits applied */
 	{ "MTRON MSP-SATA*",		NULL,	ATA_HORKAGE_BRIDGE_OK, },
 
+	/* Devices which aren't very happy with higher link speeds */
+	{ "WD My Book",			NULL,	ATA_HORKAGE_1_5_GBPS, },
+
 	/* End Marker */
 	{ }
 };
@@ -4709,8 +4758,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
 
 /**
  *	ata_qc_new - Request an available ATA command, for queueing
- *	@ap: Port associated with device @dev
- *	@dev: Device from whom we request an available command structure
+ *	@ap: target port
  *
  *	LOCKING:
  *	None.
@@ -5175,7 +5223,7 @@ bool ata_phys_link_online(struct ata_link *link)
 	u32 sstatus;
 
 	if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
-	    (sstatus & 0xf) == 0x3)
+	    ata_sstatus_online(sstatus))
 		return true;
 	return false;
 }
@@ -5199,7 +5247,7 @@ bool ata_phys_link_offline(struct ata_link *link)
 	u32 sstatus;
 
 	if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
-	    (sstatus & 0xf) != 0x3)
+	    !ata_sstatus_online(sstatus))
 		return true;
 	return false;
 }
@@ -5412,8 +5460,8 @@ void ata_dev_init(struct ata_device *dev)
 	dev->horkage = 0;
 	spin_unlock_irqrestore(ap->lock, flags);
 
-	memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0,
-	       sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET);
+	memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0,
+	       ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN);
 	dev->pio_mask = UINT_MAX;
 	dev->mwdma_mask = UINT_MAX;
 	dev->udma_mask = UINT_MAX;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 8147a838637..ce2ef047533 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -82,6 +82,10 @@ enum {
 	ATA_EH_FASTDRAIN_INTERVAL	=  3000,
 
 	ATA_EH_UA_TRIES			= 5,
+
+	/* probe speed down parameters, see ata_eh_schedule_probe() */
+	ATA_EH_PROBE_TRIAL_INTERVAL	= 60000,	/* 1 min */
+	ATA_EH_PROBE_TRIALS		= 2,
 };
 
 /* The following table determines how we sequence resets.  Each entry
@@ -1176,6 +1180,32 @@ void ata_eh_qc_retry(struct ata_queued_cmd *qc)
 }
 
 /**
+ *	ata_dev_disable - disable ATA device
+ *	@dev: ATA device to disable
+ *
+ *	Disable @dev.
+ *
+ *	Locking:
+ *	EH context.
+ */
+void ata_dev_disable(struct ata_device *dev)
+{
+	if (!ata_dev_enabled(dev))
+		return;
+
+	if (ata_msg_drv(dev->link->ap))
+		ata_dev_printk(dev, KERN_WARNING, "disabled\n");
+	ata_acpi_on_disable(dev);
+	ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | ATA_DNXFER_QUIET);
+	dev->class++;
+
+	/* From now till the next successful probe, ering is used to
+	 * track probe failures.  Clear accumulated device error info.
+	 */
+	ata_ering_clear(&dev->ering);
+}
+
+/**
  *	ata_eh_detach_dev - detach ATA device
  *	@dev: ATA device to detach
  *
@@ -1849,7 +1879,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
 	/* speed down? */
 	if (verdict & ATA_EH_SPDN_SPEED_DOWN) {
 		/* speed down SATA link speed if possible */
-		if (sata_down_spd_limit(link) == 0) {
+		if (sata_down_spd_limit(link, 0) == 0) {
 			action |= ATA_EH_RESET;
 			goto done;
 		}
@@ -2601,11 +2631,11 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	}
 
 	if (try == max_tries - 1) {
-		sata_down_spd_limit(link);
+		sata_down_spd_limit(link, 0);
 		if (slave)
-			sata_down_spd_limit(slave);
+			sata_down_spd_limit(slave, 0);
 	} else if (rc == -EPIPE)
-		sata_down_spd_limit(failed_link);
+		sata_down_spd_limit(failed_link, 0);
 
 	if (hardreset)
 		reset = hardreset;
@@ -2744,6 +2774,8 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 						     readid_flags, dev->id);
 			switch (rc) {
 			case 0:
+				/* clear error info accumulated during probe */
+				ata_ering_clear(&dev->ering);
 				new_mask |= 1 << dev->devno;
 				break;
 			case -ENOENT:
@@ -2947,9 +2979,24 @@ static int ata_eh_skip_recovery(struct ata_link *link)
 	return 1;
 }
 
+static int ata_count_probe_trials_cb(struct ata_ering_entry *ent, void *void_arg)
+{
+	u64 interval = msecs_to_jiffies(ATA_EH_PROBE_TRIAL_INTERVAL);
+	u64 now = get_jiffies_64();
+	int *trials = void_arg;
+
+	if (ent->timestamp < now - min(now, interval))
+		return -1;
+
+	(*trials)++;
+	return 0;
+}
+
 static int ata_eh_schedule_probe(struct ata_device *dev)
 {
 	struct ata_eh_context *ehc = &dev->link->eh_context;
+	struct ata_link *link = ata_dev_phys_link(dev);
+	int trials = 0;
 
 	if (!(ehc->i.probe_mask & (1 << dev->devno)) ||
 	    (ehc->did_probe_mask & (1 << dev->devno)))
@@ -2962,6 +3009,25 @@ static int ata_eh_schedule_probe(struct ata_device *dev)
 	ehc->saved_xfer_mode[dev->devno] = 0;
 	ehc->saved_ncq_enabled &= ~(1 << dev->devno);
 
+	/* Record and count probe trials on the ering.  The specific
+	 * error mask used is irrelevant.  Because a successful device
+	 * detection clears the ering, this count accumulates only if
+	 * there are consecutive failed probes.
+	 *
+	 * If the count is equal to or higher than ATA_EH_PROBE_TRIALS
+	 * in the last ATA_EH_PROBE_TRIAL_INTERVAL, link speed is
+	 * forced to 1.5Gbps.
+	 *
+	 * This is to work around cases where failed link speed
+	 * negotiation results in device misdetection leading to
+	 * infinite DEVXCHG or PHRDY CHG events.
+	 */
+	ata_ering_record(&dev->ering, 0, AC_ERR_OTHER);
+	ata_ering_map(&dev->ering, ata_count_probe_trials_cb, &trials);
+
+	if (trials > ATA_EH_PROBE_TRIALS)
+		sata_down_spd_limit(link, 1);
+
 	return 1;
 }
 
@@ -2969,7 +3035,11 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
 {
 	struct ata_eh_context *ehc = &dev->link->eh_context;
 
-	ehc->tries[dev->devno]--;
+	/* -EAGAIN from EH routine indicates retry without prejudice.
+	 * The requester is responsible for ensuring forward progress.
+	 */
+	if (err != -EAGAIN)
+		ehc->tries[dev->devno]--;
 
 	switch (err) {
 	case -ENODEV:
@@ -2979,12 +3049,13 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
 		/* give it just one more chance */
 		ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
 	case -EIO:
-		if (ehc->tries[dev->devno] == 1 && dev->pio_mode > XFER_PIO_0) {
+		if (ehc->tries[dev->devno] == 1) {
 			/* This is the last chance, better to slow
 			 * down than lose it.
 			 */
-			sata_down_spd_limit(ata_dev_phys_link(dev));
-			ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
+			sata_down_spd_limit(ata_dev_phys_link(dev), 0);
+			if (dev->pio_mode > XFER_PIO_0)
+				ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
 		}
 	}
 
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 98ca07a2db8..619f2c33950 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -729,7 +729,7 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
 		if (tries) {
 			/* consecutive revalidation failures? speed down */
 			if (reval_failed)
-				sata_down_spd_limit(link);
+				sata_down_spd_limit(link, 0);
 			else
 				reval_failed = 1;
 
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a1a6e6298c3..b9747fa59e5 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -46,6 +46,7 @@
 #include <linux/libata.h>
 #include <linux/hdreg.h>
 #include <linux/uaccess.h>
+#include <linux/suspend.h>
 
 #include "libata.h"
 
@@ -414,6 +415,7 @@ int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev,
 
 /**
  *	ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl
+ *	@ap: target port
  *	@sdev: SCSI device to get identify data for
  *	@arg: User buffer area for identify data
  *
@@ -1303,6 +1305,17 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
 
 		tf->command = ATA_CMD_VERIFY;	/* READ VERIFY */
 	} else {
+		/* Some odd clown BIOSen issue spindown on power off (ACPI S4
+		 * or S5) causing some drives to spin up and down again.
+		 */
+		if ((qc->ap->flags & ATA_FLAG_NO_POWEROFF_SPINDOWN) &&
+		    system_state == SYSTEM_POWER_OFF)
+			goto skip;
+
+		if ((qc->ap->flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) &&
+		     system_entering_hibernation())
+			goto skip;
+
 		/* XXX: This is for backward compatibility, will be
 		 * removed.  Read Documentation/feature-removal-schedule.txt
 		 * for more info.
@@ -1326,8 +1339,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
 				scmd->scsi_done = qc->scsidone;
 				qc->scsidone = ata_delayed_done;
 			}
-			scmd->result = SAM_STAT_GOOD;
-			return 1;
+			goto skip;
 		}
 
 		/* Issue ATA STANDBY IMMEDIATE command */
@@ -1343,10 +1355,13 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
 
 	return 0;
 
-invalid_fld:
+ invalid_fld:
 	ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
 	/* "Invalid field in cbd" */
 	return 1;
+ skip:
+	scmd->result = SAM_STAT_GOOD;
+	return 1;
 }
 
 
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 5a4aad123c4..0b299b0f817 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1322,7 +1322,7 @@ fsm_start:
 					 * condition.  Mark hint.
 					 */
 					ata_ehi_push_desc(ehi, "ST-ATA: "
-						"DRQ=1 with device error, "
+						"DRQ=0 without device error, "
 						"dev_stat 0x%X", status);
 					qc->err_mask |= AC_ERR_HSM |
 							AC_ERR_NODEV_HINT;
@@ -1358,6 +1358,16 @@ fsm_start:
 					qc->err_mask |= AC_ERR_HSM;
 				}
 
+				/* There are oddball controllers with
+				 * status register stuck at 0x7f and
+				 * lbal/m/h at zero which makes it
+				 * pass all other presence detection
+				 * mechanisms we have.  Set NODEV_HINT
+				 * for it.  Kernel bz#7241.
+				 */
+				if (status == 0x7f)
+					qc->err_mask |= AC_ERR_NODEV_HINT;
+
 				/* ata_pio_sectors() might change the
 				 * state to HSM_ST_LAST. so, the state
 				 * is changed after ata_pio_sectors().
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index fe2839e5877..cea8014cd87 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -79,7 +79,6 @@ extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
 			   u64 block, u32 n_block, unsigned int tf_flags,
 			   unsigned int tag);
 extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
-extern void ata_dev_disable(struct ata_device *dev);
 extern void ata_pio_queue_task(struct ata_port *ap, void *data,
 			       unsigned long delay);
 extern void ata_port_flush_task(struct ata_port *ap);
@@ -100,7 +99,7 @@ extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags);
 extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
 			      unsigned int readid_flags);
 extern int ata_dev_configure(struct ata_device *dev);
-extern int sata_down_spd_limit(struct ata_link *link);
+extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit);
 extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
 extern void ata_sg_clean(struct ata_queued_cmd *qc);
 extern void ata_qc_free(struct ata_queued_cmd *qc);
@@ -160,6 +159,7 @@ extern void ata_scsi_error(struct Scsi_Host *host);
 extern void ata_port_wait_eh(struct ata_port *ap);
 extern void ata_eh_fastdrain_timerfn(unsigned long arg);
 extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc);
+extern void ata_dev_disable(struct ata_device *dev);
 extern void ata_eh_detach_dev(struct ata_device *dev);
 extern void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev,
 			       unsigned int action);
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index cf9e9848f8b..d7bc925c524 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -45,8 +45,6 @@ static const struct portinfo pata_icside_portinfo_v6_2 = {
 	.stepping	= 6,
 };
 
-#define PATA_ICSIDE_MAX_SG	128
-
 struct pata_icside_state {
 	void __iomem *irq_port;
 	void __iomem *ioc_base;
@@ -57,7 +55,6 @@ struct pata_icside_state {
 		u8 disabled;
 		unsigned int speed[ATA_MAX_DEVICES];
 	} port[2];
-	struct scatterlist sg[PATA_ICSIDE_MAX_SG];
 };
 
 struct pata_icside_info {
@@ -222,9 +219,7 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct pata_icside_state *state = ap->host->private_data;
-	struct scatterlist *sg, *rsg = state->sg;
 	unsigned int write = qc->tf.flags & ATA_TFLAG_WRITE;
-	unsigned int si;
 
 	/*
 	 * We are simplex; BUG if we try to fiddle with DMA
@@ -233,20 +228,12 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc)
 	BUG_ON(dma_channel_active(state->dma));
 
 	/*
-	 * Copy ATAs scattered sg list into a contiguous array of sg
-	 */
-	for_each_sg(qc->sg, sg, qc->n_elem, si) {
-		memcpy(rsg, sg, sizeof(*sg));
-		rsg++;
-	}
-
-	/*
 	 * Route the DMA signals to the correct interface
 	 */
 	writeb(state->port[ap->port_no].port_sel, state->ioc_base);
 
 	set_dma_speed(state->dma, state->port[ap->port_no].speed[qc->dev->devno]);
-	set_dma_sg(state->dma, state->sg, rsg - state->sg);
+	set_dma_sg(state->dma, qc->sg, qc->n_elem);
 	set_dma_mode(state->dma, write ? DMA_MODE_WRITE : DMA_MODE_READ);
 
 	/* issue r/w command */
@@ -306,8 +293,8 @@ static int icside_dma_init(struct pata_icside_info *info)
 
 static struct scsi_host_template pata_icside_sht = {
 	ATA_BASE_SHT(DRV_NAME),
-	.sg_tablesize		= PATA_ICSIDE_MAX_SG,
-	.dma_boundary		= ~0, /* no dma boundaries */
+	.sg_tablesize		= SCSI_MAX_SG_CHAIN_SEGMENTS,
+	.dma_boundary		= IOMD_DMA_BOUNDARY,
 };
 
 static void pata_icside_postreset(struct ata_link *link, unsigned int *classes)
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 3080f371222..f1b26f7c8e4 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -12,7 +12,7 @@
  *
  * Probe code based on drivers/ide/legacy/qd65xx.c
  * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
- * Samuel Thibault <samuel.thibault@fnac.net>
+ * Samuel Thibault <samuel.thibault@ens-lyon.org>
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index c2e6fb9f2ef..ebfcda26d63 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -63,8 +63,6 @@ static inline void rb532_pata_finish_io(struct ata_port *ap)
 	   ata_sff_sync might be sufficient. */
 	ata_sff_dma_pause(ap);
 	ndelay(RB500_CF_IO_DELAY);
-
-	set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
 }
 
 static void rb532_pata_exec_command(struct ata_port *ap,
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 681169c9c64..79a6c9a0b72 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -86,6 +86,10 @@ enum {
 	VIA_SATA_PATA	= 0x800, /* SATA/PATA combined configuration */
 };
 
+enum {
+	VIA_IDFLAG_SINGLE = (1 << 0), /* single channel controller) */
+};
+
 /*
  * VIA SouthBridge chips.
  */
@@ -97,8 +101,12 @@ static const struct via_isa_bridge {
 	u8 rev_max;
 	u16 flags;
 } via_isa_bridges[] = {
+	{ "vx855",	PCI_DEVICE_ID_VIA_VX855,    0x00, 0x2f,
+	  VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
 	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, VIA_UDMA_133 |
 	VIA_BAD_AST | VIA_SATA_PATA },
+	{ "vt8261",	PCI_DEVICE_ID_VIA_8261,     0x00, 0x2f,
+	  VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
@@ -122,6 +130,8 @@ static const struct via_isa_bridge {
 	{ "vt82c586",	PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO },
 	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK },
 	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
+	{ "vtxxxx",	PCI_DEVICE_ID_VIA_ANON,    0x00, 0x2f,
+	  VIA_UDMA_133 | VIA_BAD_AST },
 	{ NULL }
 };
 
@@ -460,6 +470,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	static int printed_version;
 	u8 enable;
 	u32 timing;
+	unsigned long flags = id->driver_data;
 	int rc;
 
 	if (!printed_version++)
@@ -469,9 +480,13 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (rc)
 		return rc;
 
+	if (flags & VIA_IDFLAG_SINGLE)
+		ppi[1] = &ata_dummy_port_info;
+
 	/* To find out how the IDE will behave and what features we
 	   actually have to look at the bridge not the IDE controller */
-	for (config = via_isa_bridges; config->id; config++)
+	for (config = via_isa_bridges; config->id != PCI_DEVICE_ID_VIA_ANON;
+	     config++)
 		if ((isa = pci_get_device(PCI_VENDOR_ID_VIA +
 			!!(config->flags & VIA_BAD_ID),
 			config->id, NULL))) {
@@ -482,10 +497,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			pci_dev_put(isa);
 		}
 
-	if (!config->id) {
-		printk(KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n");
-		return -ENODEV;
-	}
 	pci_dev_put(isa);
 
 	if (!(config->flags & VIA_NO_ENABLES)) {
@@ -587,6 +598,7 @@ static const struct pci_device_id via[] = {
 	{ PCI_VDEVICE(VIA, 0x1571), },
 	{ PCI_VDEVICE(VIA, 0x3164), },
 	{ PCI_VDEVICE(VIA, 0x5324), },
+	{ PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE },
 
 	{ },
 };
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 86918634a4c..4ae1a4138b4 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -33,10 +33,6 @@
  *
  * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it).
  *
- * --> Investigate problems with PCI Message Signalled Interrupts (MSI).
- *
- * --> Cache frequently-accessed registers in mv_port_priv to reduce overhead.
- *
  * --> Develop a low-power-consumption strategy, and implement it.
  *
  * --> [Experiment, low priority] Investigate interrupt coalescing.
@@ -72,7 +68,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_mv"
-#define DRV_VERSION	"1.24"
+#define DRV_VERSION	"1.25"
 
 enum {
 	/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -351,8 +347,6 @@ enum {
 
 	EDMA_HALTCOND_OFS	= 0x60,		/* GenIIe halt conditions */
 
-	GEN_II_NCQ_MAX_SECTORS	= 256,		/* max sects/io on Gen2 w/NCQ */
-
 	/* Host private flags (hp_flags) */
 	MV_HP_FLAG_MSI		= (1 << 0),
 	MV_HP_ERRATA_50XXB0	= (1 << 1),
@@ -669,8 +663,8 @@ static const struct pci_device_id mv_pci_tbl[] = {
 	{ PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
 	/* RocketRAID 1720/174x have different identifiers */
 	{ PCI_VDEVICE(TTI, 0x1720), chip_6042 },
-	{ PCI_VDEVICE(TTI, 0x1740), chip_508x },
-	{ PCI_VDEVICE(TTI, 0x1742), chip_508x },
+	{ PCI_VDEVICE(TTI, 0x1740), chip_6042 },
+	{ PCI_VDEVICE(TTI, 0x1742), chip_6042 },
 
 	{ PCI_VDEVICE(MARVELL, 0x6040), chip_604x },
 	{ PCI_VDEVICE(MARVELL, 0x6041), chip_604x },
@@ -883,19 +877,15 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
 		struct mv_host_priv *hpriv = ap->host->private_data;
 		int hardport = mv_hardport_from_port(ap->port_no);
 		void __iomem *hc_mmio = mv_hc_base_from_port(
-					mv_host_base(ap->host), hardport);
-		u32 hc_irq_cause, ipending;
+					mv_host_base(ap->host), ap->port_no);
+		u32 hc_irq_cause;
 
 		/* clear EDMA event indicators, if any */
 		writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
 
-		/* clear EDMA interrupt indicator, if any */
-		hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
-		ipending = (DEV_IRQ | DMA_IRQ) << hardport;
-		if (hc_irq_cause & ipending) {
-			writelfl(hc_irq_cause & ~ipending,
-				 hc_mmio + HC_IRQ_CAUSE_OFS);
-		}
+		/* clear pending irq events */
+		hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
+		writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
 
 		mv_edma_cfg(ap, want_ncq);
 
@@ -1099,20 +1089,12 @@ static void mv6_dev_config(struct ata_device *adev)
 	 *
 	 * Gen-II does not support NCQ over a port multiplier
 	 *  (no FIS-based switching).
-	 *
-	 * We don't have hob_nsect when doing NCQ commands on Gen-II.
-	 * See mv_qc_prep() for more info.
 	 */
 	if (adev->flags & ATA_DFLAG_NCQ) {
 		if (sata_pmp_attached(adev->link->ap)) {
 			adev->flags &= ~ATA_DFLAG_NCQ;
 			ata_dev_printk(adev, KERN_INFO,
 				"NCQ disabled for command-based switching\n");
-		} else if (adev->max_sectors > GEN_II_NCQ_MAX_SECTORS) {
-			adev->max_sectors = GEN_II_NCQ_MAX_SECTORS;
-			ata_dev_printk(adev, KERN_INFO,
-				"max_sectors limited to %u for NCQ\n",
-				adev->max_sectors);
 		}
 	}
 }
@@ -1450,7 +1432,8 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 	 * only 11 bytes...so we must pick and choose required
 	 * registers based on the command.  So, we drop feature and
 	 * hob_feature for [RW] DMA commands, but they are needed for
-	 * NCQ.  NCQ will drop hob_nsect.
+	 * NCQ.  NCQ will drop hob_nsect, which is not needed there
+	 * (nsect is used only for the tag; feat/hob_feat hold true nsect).
 	 */
 	switch (tf->command) {
 	case ATA_CMD_READ:
@@ -2214,9 +2197,15 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
 	struct ata_host *host = dev_instance;
 	struct mv_host_priv *hpriv = host->private_data;
 	unsigned int handled = 0;
+	int using_msi = hpriv->hp_flags & MV_HP_FLAG_MSI;
 	u32 main_irq_cause, pending_irqs;
 
 	spin_lock(&host->lock);
+
+	/* for MSI:  block new interrupts while in here */
+	if (using_msi)
+		writel(0, hpriv->main_irq_mask_addr);
+
 	main_irq_cause = readl(hpriv->main_irq_cause_addr);
 	pending_irqs   = main_irq_cause & hpriv->main_irq_mask;
 	/*
@@ -2230,6 +2219,11 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
 			handled = mv_host_intr(host, pending_irqs);
 	}
 	spin_unlock(&host->lock);
+
+	/* for MSI: unmask; interrupt cause bits will retrigger now */
+	if (using_msi)
+		writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr);
+
 	return IRQ_RETVAL(handled);
 }
 
@@ -2821,8 +2815,7 @@ static void mv_eh_thaw(struct ata_port *ap)
 	writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
 
 	/* clear pending irq events */
-	hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
-	hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport);
+	hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
 	writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
 
 	mv_enable_port_irqs(ap, ERR_IRQ);
@@ -3075,6 +3068,9 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
 		hpriv->main_irq_mask_addr  = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
 	}
 
+	/* initialize shadow irq mask with register's value */
+	hpriv->main_irq_mask = readl(hpriv->main_irq_mask_addr);
+
 	/* global interrupt mask: 0 == mask everything */
 	mv_set_main_irq_mask(host, ~0, 0);
 
@@ -3430,9 +3426,9 @@ static int mv_pci_init_one(struct pci_dev *pdev,
 	if (rc)
 		return rc;
 
-	/* Enable interrupts */
-	if (msi && pci_enable_msi(pdev))
-		pci_intx(pdev, 1);
+	/* Enable message-switched interrupts, if requested */
+	if (msi && pci_enable_msi(pdev) == 0)
+		hpriv->hp_flags |= MV_HP_FLAG_MSI;
 
 	mv_dump_pci_cfg(pdev, 0x68);
 	mv_print_info(host);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 6f146061432..444af0415ca 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -305,10 +305,10 @@ static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance);
 static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
 static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
 
+static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class,
+				   unsigned long deadline);
 static void nv_nf2_freeze(struct ata_port *ap);
 static void nv_nf2_thaw(struct ata_port *ap);
-static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
-			    unsigned long deadline);
 static void nv_ck804_freeze(struct ata_port *ap);
 static void nv_ck804_thaw(struct ata_port *ap);
 static int nv_adma_slave_config(struct scsi_device *sdev);
@@ -352,6 +352,7 @@ enum nv_host_type
 	NFORCE3 = NFORCE2,	/* NF2 == NF3 as far as sata_nv is concerned */
 	CK804,
 	ADMA,
+	MCP5x,
 	SWNCQ,
 };
 
@@ -363,10 +364,10 @@ static const struct pci_device_id nv_pci_tbl[] = {
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2), CK804 },
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA), CK804 },
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2), CK804 },
-	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), SWNCQ },
-	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), SWNCQ },
-	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), SWNCQ },
-	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), SWNCQ },
+	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), MCP5x },
+	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), MCP5x },
+	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), MCP5x },
+	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), MCP5x },
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC },
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC },
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC },
@@ -432,14 +433,19 @@ static struct ata_port_operations nv_nf2_ops = {
 	.inherits		= &nv_common_ops,
 	.freeze			= nv_nf2_freeze,
 	.thaw			= nv_nf2_thaw,
-	.hardreset		= nv_nf2_hardreset,
+	.hardreset		= nv_noclassify_hardreset,
 };
 
-/* CK804 finally gets hardreset right */
+/* For initial probing after boot and hot plugging, hardreset mostly
+ * works fine on CK804 but curiously, reprobing on the initial port by
+ * rescanning or rmmod/insmod fails to acquire the initial D2H Reg FIS
+ * in somewhat undeterministic way.  Use noclassify hardreset.
+ */
 static struct ata_port_operations nv_ck804_ops = {
 	.inherits		= &nv_common_ops,
 	.freeze			= nv_ck804_freeze,
 	.thaw			= nv_ck804_thaw,
+	.hardreset		= nv_noclassify_hardreset,
 	.host_stop		= nv_ck804_host_stop,
 };
 
@@ -467,8 +473,19 @@ static struct ata_port_operations nv_adma_ops = {
 	.host_stop		= nv_adma_host_stop,
 };
 
+/* Kernel bz#12351 reports that when SWNCQ is enabled, for hotplug to
+ * work, hardreset should be used and hardreset can't report proper
+ * signature, which suggests that mcp5x is closer to nf2 as long as
+ * reset quirkiness is concerned.  Define separate ops for mcp5x with
+ * nv_noclassify_hardreset().
+ */
+static struct ata_port_operations nv_mcp5x_ops = {
+	.inherits		= &nv_common_ops,
+	.hardreset		= nv_noclassify_hardreset,
+};
+
 static struct ata_port_operations nv_swncq_ops = {
-	.inherits		= &nv_generic_ops,
+	.inherits		= &nv_mcp5x_ops,
 
 	.qc_defer		= ata_std_qc_defer,
 	.qc_prep		= nv_swncq_qc_prep,
@@ -531,6 +548,15 @@ static const struct ata_port_info nv_port_info[] = {
 		.port_ops	= &nv_adma_ops,
 		.private_data	= NV_PI_PRIV(nv_adma_interrupt, &nv_adma_sht),
 	},
+	/* MCP5x */
+	{
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+		.pio_mask	= NV_PIO_MASK,
+		.mwdma_mask	= NV_MWDMA_MASK,
+		.udma_mask	= NV_UDMA_MASK,
+		.port_ops	= &nv_mcp5x_ops,
+		.private_data	= NV_PI_PRIV(nv_generic_interrupt, &nv_sht),
+	},
 	/* SWNCQ */
 	{
 		.flags	        = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
@@ -1530,6 +1556,17 @@ static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
 	return 0;
 }
 
+static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class,
+				   unsigned long deadline)
+{
+	bool online;
+	int rc;
+
+	rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
+				 &online, NULL);
+	return online ? -EAGAIN : rc;
+}
+
 static void nv_nf2_freeze(struct ata_port *ap)
 {
 	void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr;
@@ -1554,17 +1591,6 @@ static void nv_nf2_thaw(struct ata_port *ap)
 	iowrite8(mask, scr_addr + NV_INT_ENABLE);
 }
 
-static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
-			    unsigned long deadline)
-{
-	bool online;
-	int rc;
-
-	rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
-				 &online, NULL);
-	return online ? -EAGAIN : rc;
-}
-
 static void nv_ck804_freeze(struct ata_port *ap)
 {
 	void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR];
@@ -2355,14 +2381,9 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (type == CK804 && adma_enabled) {
 		dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
 		type = ADMA;
-	}
-
-	if (type == SWNCQ) {
-		if (swncq_enabled)
-			dev_printk(KERN_NOTICE, &pdev->dev,
-				   "Using SWNCQ mode\n");
-		else
-			type = GENERIC;
+	} else if (type == MCP5x && swncq_enabled) {
+		dev_printk(KERN_NOTICE, &pdev->dev, "Using SWNCQ mode\n");
+		type = SWNCQ;
 	}
 
 	ppi[0] = &nv_port_info[type];
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 564c142b03b..d0091609e21 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -44,6 +44,7 @@
 #include <linux/device.h>
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
+#include <linux/dmi.h>
 
 #define DRV_NAME	"sata_sil"
 #define DRV_VERSION	"2.4"
@@ -323,7 +324,7 @@ static void sil_fill_sg(struct ata_queued_cmd *qc)
 
 		prd->addr = cpu_to_le32(addr);
 		prd->flags_len = cpu_to_le32(sg_len);
-		VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, sg_len);
+		VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", si, addr, sg_len);
 
 		last_prd = prd;
 		prd++;
@@ -695,11 +696,38 @@ static void sil_init_controller(struct ata_host *host)
 	}
 }
 
+static bool sil_broken_system_poweroff(struct pci_dev *pdev)
+{
+	static const struct dmi_system_id broken_systems[] = {
+		{
+			.ident = "HP Compaq nx6325",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
+			},
+			/* PCI slot number of the controller */
+			.driver_data = (void *)0x12UL,
+		},
+
+		{ }	/* terminate list */
+	};
+	const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+	if (dmi) {
+		unsigned long slot = (unsigned long)dmi->driver_data;
+		/* apply the quirk only to on-board controllers */
+		return slot == PCI_SLOT(pdev->devfn);
+	}
+
+	return false;
+}
+
 static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
 	int board_id = ent->driver_data;
-	const struct ata_port_info *ppi[] = { &sil_port_info[board_id], NULL };
+	struct ata_port_info pi = sil_port_info[board_id];
+	const struct ata_port_info *ppi[] = { &pi, NULL };
 	struct ata_host *host;
 	void __iomem *mmio_base;
 	int n_ports, rc;
@@ -713,6 +741,13 @@ static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (board_id == sil_3114)
 		n_ports = 4;
 
+	if (sil_broken_system_poweroff(pdev)) {
+		pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN |
+					ATA_FLAG_NO_HIBERNATE_SPINDOWN;
+		dev_info(&pdev->dev, "quirky BIOS, skipping spindown "
+				"on poweroff and hibernation\n");
+	}
+
 	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
 	if (!host)
 		return -ENOMEM;
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 8079afca497..f3eae630e58 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -777,10 +777,16 @@ static void device_remove_class_symlinks(struct device *dev)
 int dev_set_name(struct device *dev, const char *fmt, ...)
 {
 	va_list vargs;
+	char *s;
 
 	va_start(vargs, fmt);
 	vsnprintf(dev->bus_id, sizeof(dev->bus_id), fmt, vargs);
 	va_end(vargs);
+
+	/* ewww... some of these buggers have / in the name... */
+	while ((s = strchr(dev->bus_id, '/')))
+		*s = '!';
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(dev_set_name);
@@ -1274,7 +1280,7 @@ EXPORT_SYMBOL_GPL(__root_device_register);
 
 /**
  * root_device_unregister - unregister and free a root device
- * @root: device going away.
+ * @dev: device going away
  *
  * This function unregisters and cleans up a device that was created by
  * root_device_register().
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index f5be8081cd8..735bbe2be51 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -761,7 +761,7 @@ source "drivers/char/hw_random/Kconfig"
 
 config NVRAM
 	tristate "/dev/nvram support"
-	depends on ATARI || X86 || ARM || GENERIC_NVRAM
+	depends on ATARI || X86 || (ARM && RTC_DRV_CMOS) || GENERIC_NVRAM
 	---help---
 	  If you say Y here and create a character special file /dev/nvram
 	  with major number 10 and minor number 144 using mknod ("man mknod"),
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index d4e7dca06e4..ba68a4671cb 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -102,7 +102,7 @@ static int __init omap_rng_probe(struct platform_device *pdev)
 		return -EBUSY;
 
 	if (cpu_is_omap24xx()) {
-		rng_ick = clk_get(NULL, "rng_ick");
+		rng_ick = clk_get(&pdev->dev, "rng_ick");
 		if (IS_ERR(rng_ick)) {
 			dev_err(&pdev->dev, "Could not get rng_ick\n");
 			ret = PTR_ERR(rng_ick);
diff --git a/drivers/char/selection.c b/drivers/char/selection.c
index f29fbe9b8ed..cb8ca569896 100644
--- a/drivers/char/selection.c
+++ b/drivers/char/selection.c
@@ -268,7 +268,7 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t
 
 	/* Allocate a new buffer before freeing the old one ... */
 	multiplier = use_unicode ? 3 : 1;  /* chars can take up to 3 bytes */
-	bp = kmalloc((sel_end-sel_start)/2*multiplier+1, GFP_KERNEL);
+	bp = kmalloc(((sel_end-sel_start)/2+1)*multiplier, GFP_KERNEL);
 	if (!bp) {
 		printk(KERN_WARNING "selection: kmalloc() failed\n");
 		clear_selection();
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index b60be7b0dec..f146e90404f 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -1713,8 +1713,8 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd,
 		for (i = 0; i < SX_NBOARDS; i++)
 			sx_dprintk(SX_DEBUG_FIRMWARE, "<%x> ", boards[i].flags);
 		sx_dprintk(SX_DEBUG_FIRMWARE, "\n");
-		unlock_kernel();
-		return -EIO;
+		rc = -EIO;
+		goto out;
 	}
 
 	switch (cmd) {
@@ -1747,7 +1747,8 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd,
 		break;
 	case SXIO_DO_RAMTEST:
 		if (sx_initialized)	/* Already initialized: better not ramtest the board.  */
-			return -EPERM;
+			rc = -EPERM;
+			break;
 		if (IS_SX_BOARD(board)) {
 			rc = do_memtest(board, 0, 0x7000);
 			if (!rc)
@@ -1844,6 +1845,7 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd,
 		rc = -ENOTTY;
 		break;
 	}
+out:
 	unlock_kernel();
 	func_exit();
 	return rc;
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index d33e5ab0617..bc84e125c6b 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1817,8 +1817,10 @@ got_driver:
 		/* check whether we're reopening an existing tty */
 		tty = tty_driver_lookup_tty(driver, inode, index);
 
-		if (IS_ERR(tty))
+		if (IS_ERR(tty)) {
+			mutex_unlock(&tty_mutex);
 			return PTR_ERR(tty);
+		}
 	}
 
 	if (tty) {
diff --git a/drivers/dca/dca-core.c b/drivers/dca/dca-core.c
index 55433849bfa..33bd7534751 100644
--- a/drivers/dca/dca-core.c
+++ b/drivers/dca/dca-core.c
@@ -28,7 +28,7 @@
 #include <linux/device.h>
 #include <linux/dca.h>
 
-#define DCA_VERSION "1.4"
+#define DCA_VERSION "1.8"
 
 MODULE_VERSION(DCA_VERSION);
 MODULE_LICENSE("GPL");
@@ -60,16 +60,17 @@ int dca_add_requester(struct device *dev)
 {
 	struct dca_provider *dca;
 	int err, slot = -ENODEV;
+	unsigned long flags;
 
 	if (!dev)
 		return -EFAULT;
 
-	spin_lock(&dca_lock);
+	spin_lock_irqsave(&dca_lock, flags);
 
 	/* check if the requester has not been added already */
 	dca = dca_find_provider_by_dev(dev);
 	if (dca) {
-		spin_unlock(&dca_lock);
+		spin_unlock_irqrestore(&dca_lock, flags);
 		return -EEXIST;
 	}
 
@@ -78,19 +79,21 @@ int dca_add_requester(struct device *dev)
 		if (slot >= 0)
 			break;
 	}
-	if (slot < 0) {
-		spin_unlock(&dca_lock);
+
+	spin_unlock_irqrestore(&dca_lock, flags);
+
+	if (slot < 0)
 		return slot;
-	}
 
 	err = dca_sysfs_add_req(dca, dev, slot);
 	if (err) {
-		dca->ops->remove_requester(dca, dev);
-		spin_unlock(&dca_lock);
+		spin_lock_irqsave(&dca_lock, flags);
+		if (dca == dca_find_provider_by_dev(dev))
+			dca->ops->remove_requester(dca, dev);
+		spin_unlock_irqrestore(&dca_lock, flags);
 		return err;
 	}
 
-	spin_unlock(&dca_lock);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(dca_add_requester);
@@ -103,25 +106,25 @@ int dca_remove_requester(struct device *dev)
 {
 	struct dca_provider *dca;
 	int slot;
+	unsigned long flags;
 
 	if (!dev)
 		return -EFAULT;
 
-	spin_lock(&dca_lock);
+	spin_lock_irqsave(&dca_lock, flags);
 	dca = dca_find_provider_by_dev(dev);
 	if (!dca) {
-		spin_unlock(&dca_lock);
+		spin_unlock_irqrestore(&dca_lock, flags);
 		return -ENODEV;
 	}
 	slot = dca->ops->remove_requester(dca, dev);
-	if (slot < 0) {
-		spin_unlock(&dca_lock);
+	spin_unlock_irqrestore(&dca_lock, flags);
+
+	if (slot < 0)
 		return slot;
-	}
 
 	dca_sysfs_remove_req(dca, slot);
 
-	spin_unlock(&dca_lock);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(dca_remove_requester);
@@ -135,17 +138,18 @@ u8 dca_common_get_tag(struct device *dev, int cpu)
 {
 	struct dca_provider *dca;
 	u8 tag;
+	unsigned long flags;
 
-	spin_lock(&dca_lock);
+	spin_lock_irqsave(&dca_lock, flags);
 
 	dca = dca_find_provider_by_dev(dev);
 	if (!dca) {
-		spin_unlock(&dca_lock);
+		spin_unlock_irqrestore(&dca_lock, flags);
 		return -ENODEV;
 	}
 	tag = dca->ops->get_tag(dca, dev, cpu);
 
-	spin_unlock(&dca_lock);
+	spin_unlock_irqrestore(&dca_lock, flags);
 	return tag;
 }
 
@@ -217,11 +221,16 @@ static BLOCKING_NOTIFIER_HEAD(dca_provider_chain);
 int register_dca_provider(struct dca_provider *dca, struct device *dev)
 {
 	int err;
+	unsigned long flags;
 
 	err = dca_sysfs_add_provider(dca, dev);
 	if (err)
 		return err;
+
+	spin_lock_irqsave(&dca_lock, flags);
 	list_add(&dca->node, &dca_providers);
+	spin_unlock_irqrestore(&dca_lock, flags);
+
 	blocking_notifier_call_chain(&dca_provider_chain,
 				     DCA_PROVIDER_ADD, NULL);
 	return 0;
@@ -234,9 +243,15 @@ EXPORT_SYMBOL_GPL(register_dca_provider);
  */
 void unregister_dca_provider(struct dca_provider *dca)
 {
+	unsigned long flags;
+
 	blocking_notifier_call_chain(&dca_provider_chain,
 				     DCA_PROVIDER_REMOVE, NULL);
+
+	spin_lock_irqsave(&dca_lock, flags);
 	list_del(&dca->node);
+	spin_unlock_irqrestore(&dca_lock, flags);
+
 	dca_sysfs_remove_provider(dca);
 }
 EXPORT_SYMBOL_GPL(unregister_dca_provider);
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index e34b0642081..48ea59e7967 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -62,6 +62,25 @@ config MV_XOR
 	---help---
 	  Enable support for the Marvell XOR engine.
 
+config MX3_IPU
+	bool "MX3x Image Processing Unit support"
+	depends on ARCH_MX3
+	select DMA_ENGINE
+	default y
+	help
+	  If you plan to use the Image Processing unit in the i.MX3x, say
+	  Y here. If unsure, select Y.
+
+config MX3_IPU_IRQS
+	int "Number of dynamically mapped interrupts for IPU"
+	depends on MX3_IPU
+	range 2 137
+	default 4
+	help
+	  Out of 137 interrupt sources on i.MX31 IPU only very few are used.
+	  To avoid bloating the irq_desc[] array we allocate a sufficient
+	  number of IRQ slots and map them dynamically to specific sources.
+
 config DMA_ENGINE
 	bool
 
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 14f59527d4f..2e5dc96700d 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
 obj-$(CONFIG_MV_XOR) += mv_xor.o
 obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+obj-$(CONFIG_MX3_IPU) += ipu/
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 403dbe78112..a58993011ed 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -329,9 +329,6 @@ struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type)
 	struct dma_chan *chan;
 	int cpu;
 
-	WARN_ONCE(dmaengine_ref_count == 0,
-		  "client called %s without a reference", __func__);
-
 	cpu = get_cpu();
 	chan = per_cpu_ptr(channel_table[tx_type], cpu)->chan;
 	put_cpu();
@@ -348,9 +345,6 @@ void dma_issue_pending_all(void)
 	struct dma_device *device;
 	struct dma_chan *chan;
 
-	WARN_ONCE(dmaengine_ref_count == 0,
-		  "client called %s without a reference", __func__);
-
 	rcu_read_lock();
 	list_for_each_entry_rcu(device, &dma_device_list, global_node) {
 		if (dma_has_cap(DMA_PRIVATE, device->cap_mask))
@@ -961,6 +955,8 @@ void dma_run_dependencies(struct dma_async_tx_descriptor *tx)
 	if (!dep)
 		return;
 
+	/* we'll submit tx->next now, so clear the link */
+	tx->next = NULL;
 	chan = dep->chan;
 
 	/* keep submitting up until a channel switch is detected
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 3603f1ea5b2..732fa1ec36a 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -217,6 +217,10 @@ static int dmatest_func(void *data)
 	chan = thread->chan;
 
 	while (!kthread_should_stop()) {
+		struct dma_device *dev = chan->device;
+		struct dma_async_tx_descriptor *tx;
+		dma_addr_t dma_src, dma_dest;
+
 		total_tests++;
 
 		len = dmatest_random() % test_buf_size + 1;
@@ -226,10 +230,30 @@ static int dmatest_func(void *data)
 		dmatest_init_srcbuf(thread->srcbuf, src_off, len);
 		dmatest_init_dstbuf(thread->dstbuf, dst_off, len);
 
-		cookie = dma_async_memcpy_buf_to_buf(chan,
-				thread->dstbuf + dst_off,
-				thread->srcbuf + src_off,
-				len);
+		dma_src = dma_map_single(dev->dev, thread->srcbuf + src_off,
+				len, DMA_TO_DEVICE);
+		/* map with DMA_BIDIRECTIONAL to force writeback/invalidate */
+		dma_dest = dma_map_single(dev->dev, thread->dstbuf,
+				test_buf_size, DMA_BIDIRECTIONAL);
+
+		tx = dev->device_prep_dma_memcpy(chan, dma_dest + dst_off,
+				dma_src, len,
+				DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP);
+		if (!tx) {
+			dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE);
+			dma_unmap_single(dev->dev, dma_dest,
+					test_buf_size, DMA_BIDIRECTIONAL);
+			pr_warning("%s: #%u: prep error with src_off=0x%x "
+					"dst_off=0x%x len=0x%x\n",
+					thread_name, total_tests - 1,
+					src_off, dst_off, len);
+			msleep(100);
+			failed_tests++;
+			continue;
+		}
+		tx->callback = NULL;
+		cookie = tx->tx_submit(tx);
+
 		if (dma_submit_error(cookie)) {
 			pr_warning("%s: #%u: submit error %d with src_off=0x%x "
 					"dst_off=0x%x len=0x%x\n",
@@ -253,6 +277,9 @@ static int dmatest_func(void *data)
 			failed_tests++;
 			continue;
 		}
+		/* Unmap by myself (see DMA_COMPL_SKIP_DEST_UNMAP above) */
+		dma_unmap_single(dev->dev, dma_dest,
+				test_buf_size, DMA_BIDIRECTIONAL);
 
 		error_count = 0;
 
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index ca70a21afc6..70126a60623 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -822,7 +822,7 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev,
 	 */
 	WARN_ON(fdev->feature != new_fsl_chan->feature);
 
-	new_fsl_chan->dev = &new_fsl_chan->common.dev->device;
+	new_fsl_chan->dev = fdev->dev;
 	new_fsl_chan->reg_base = ioremap(new_fsl_chan->reg.start,
 			new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1);
 
@@ -875,7 +875,8 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev,
 	}
 
 	dev_info(fdev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id,
-				compatible, new_fsl_chan->irq);
+		 compatible,
+		 new_fsl_chan->irq != NO_IRQ ? new_fsl_chan->irq : fdev->irq);
 
 	return 0;
 
@@ -890,7 +891,8 @@ err_no_reg:
 
 static void fsl_dma_chan_remove(struct fsl_dma_chan *fchan)
 {
-	free_irq(fchan->irq, fchan);
+	if (fchan->irq != NO_IRQ)
+		free_irq(fchan->irq, fchan);
 	list_del(&fchan->common.device_node);
 	iounmap(fchan->reg_base);
 	kfree(fchan);
diff --git a/drivers/dma/ipu/Makefile b/drivers/dma/ipu/Makefile
new file mode 100644
index 00000000000..6704cf48326
--- /dev/null
+++ b/drivers/dma/ipu/Makefile
@@ -0,0 +1 @@
+obj-y	+= ipu_irq.o ipu_idmac.o
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
new file mode 100644
index 00000000000..1f154d08e98
--- /dev/null
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -0,0 +1,1740 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/vmalloc.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <mach/ipu.h>
+
+#include "ipu_intern.h"
+
+#define FS_VF_IN_VALID	0x00000002
+#define FS_ENC_IN_VALID	0x00000001
+
+/*
+ * There can be only one, we could allocate it dynamically, but then we'd have
+ * to add an extra parameter to some functions, and use something as ugly as
+ *	struct ipu *ipu = to_ipu(to_idmac(ichan->dma_chan.device));
+ * in the ISR
+ */
+static struct ipu ipu_data;
+
+#define to_ipu(id) container_of(id, struct ipu, idmac)
+
+static u32 __idmac_read_icreg(struct ipu *ipu, unsigned long reg)
+{
+	return __raw_readl(ipu->reg_ic + reg);
+}
+
+#define idmac_read_icreg(ipu, reg) __idmac_read_icreg(ipu, reg - IC_CONF)
+
+static void __idmac_write_icreg(struct ipu *ipu, u32 value, unsigned long reg)
+{
+	__raw_writel(value, ipu->reg_ic + reg);
+}
+
+#define idmac_write_icreg(ipu, v, reg) __idmac_write_icreg(ipu, v, reg - IC_CONF)
+
+static u32 idmac_read_ipureg(struct ipu *ipu, unsigned long reg)
+{
+	return __raw_readl(ipu->reg_ipu + reg);
+}
+
+static void idmac_write_ipureg(struct ipu *ipu, u32 value, unsigned long reg)
+{
+	__raw_writel(value, ipu->reg_ipu + reg);
+}
+
+/*****************************************************************************
+ * IPU / IC common functions
+ */
+static void dump_idmac_reg(struct ipu *ipu)
+{
+	dev_dbg(ipu->dev, "IDMAC_CONF 0x%x, IC_CONF 0x%x, IDMAC_CHA_EN 0x%x, "
+		"IDMAC_CHA_PRI 0x%x, IDMAC_CHA_BUSY 0x%x\n",
+		idmac_read_icreg(ipu, IDMAC_CONF),
+		idmac_read_icreg(ipu, IC_CONF),
+		idmac_read_icreg(ipu, IDMAC_CHA_EN),
+		idmac_read_icreg(ipu, IDMAC_CHA_PRI),
+		idmac_read_icreg(ipu, IDMAC_CHA_BUSY));
+	dev_dbg(ipu->dev, "BUF0_RDY 0x%x, BUF1_RDY 0x%x, CUR_BUF 0x%x, "
+		"DB_MODE 0x%x, TASKS_STAT 0x%x\n",
+		idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY),
+		idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY),
+		idmac_read_ipureg(ipu, IPU_CHA_CUR_BUF),
+		idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL),
+		idmac_read_ipureg(ipu, IPU_TASKS_STAT));
+}
+
+static uint32_t bytes_per_pixel(enum pixel_fmt fmt)
+{
+	switch (fmt) {
+	case IPU_PIX_FMT_GENERIC:	/* generic data */
+	case IPU_PIX_FMT_RGB332:
+	case IPU_PIX_FMT_YUV420P:
+	case IPU_PIX_FMT_YUV422P:
+	default:
+		return 1;
+	case IPU_PIX_FMT_RGB565:
+	case IPU_PIX_FMT_YUYV:
+	case IPU_PIX_FMT_UYVY:
+		return 2;
+	case IPU_PIX_FMT_BGR24:
+	case IPU_PIX_FMT_RGB24:
+		return 3;
+	case IPU_PIX_FMT_GENERIC_32:	/* generic data */
+	case IPU_PIX_FMT_BGR32:
+	case IPU_PIX_FMT_RGB32:
+	case IPU_PIX_FMT_ABGR32:
+		return 4;
+	}
+}
+
+/* Enable / disable direct write to memory by the Camera Sensor Interface */
+static void ipu_ic_enable_task(struct ipu *ipu, enum ipu_channel channel)
+{
+	uint32_t ic_conf, mask;
+
+	switch (channel) {
+	case IDMAC_IC_0:
+		mask = IC_CONF_PRPENC_EN;
+		break;
+	case IDMAC_IC_7:
+		mask = IC_CONF_RWS_EN | IC_CONF_PRPENC_EN;
+		break;
+	default:
+		return;
+	}
+	ic_conf = idmac_read_icreg(ipu, IC_CONF) | mask;
+	idmac_write_icreg(ipu, ic_conf, IC_CONF);
+}
+
+static void ipu_ic_disable_task(struct ipu *ipu, enum ipu_channel channel)
+{
+	uint32_t ic_conf, mask;
+
+	switch (channel) {
+	case IDMAC_IC_0:
+		mask = IC_CONF_PRPENC_EN;
+		break;
+	case IDMAC_IC_7:
+		mask = IC_CONF_RWS_EN | IC_CONF_PRPENC_EN;
+		break;
+	default:
+		return;
+	}
+	ic_conf = idmac_read_icreg(ipu, IC_CONF) & ~mask;
+	idmac_write_icreg(ipu, ic_conf, IC_CONF);
+}
+
+static uint32_t ipu_channel_status(struct ipu *ipu, enum ipu_channel channel)
+{
+	uint32_t stat = TASK_STAT_IDLE;
+	uint32_t task_stat_reg = idmac_read_ipureg(ipu, IPU_TASKS_STAT);
+
+	switch (channel) {
+	case IDMAC_IC_7:
+		stat = (task_stat_reg & TSTAT_CSI2MEM_MASK) >>
+			TSTAT_CSI2MEM_OFFSET;
+		break;
+	case IDMAC_IC_0:
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+	default:
+		break;
+	}
+	return stat;
+}
+
+struct chan_param_mem_planar {
+	/* Word 0 */
+	u32	xv:10;
+	u32	yv:10;
+	u32	xb:12;
+
+	u32	yb:12;
+	u32	res1:2;
+	u32	nsb:1;
+	u32	lnpb:6;
+	u32	ubo_l:11;
+
+	u32	ubo_h:15;
+	u32	vbo_l:17;
+
+	u32	vbo_h:9;
+	u32	res2:3;
+	u32	fw:12;
+	u32	fh_l:8;
+
+	u32	fh_h:4;
+	u32	res3:28;
+
+	/* Word 1 */
+	u32	eba0;
+
+	u32	eba1;
+
+	u32	bpp:3;
+	u32	sl:14;
+	u32	pfs:3;
+	u32	bam:3;
+	u32	res4:2;
+	u32	npb:6;
+	u32	res5:1;
+
+	u32	sat:2;
+	u32	res6:30;
+} __attribute__ ((packed));
+
+struct chan_param_mem_interleaved {
+	/* Word 0 */
+	u32	xv:10;
+	u32	yv:10;
+	u32	xb:12;
+
+	u32	yb:12;
+	u32	sce:1;
+	u32	res1:1;
+	u32	nsb:1;
+	u32	lnpb:6;
+	u32	sx:10;
+	u32	sy_l:1;
+
+	u32	sy_h:9;
+	u32	ns:10;
+	u32	sm:10;
+	u32	sdx_l:3;
+
+	u32	sdx_h:2;
+	u32	sdy:5;
+	u32	sdrx:1;
+	u32	sdry:1;
+	u32	sdr1:1;
+	u32	res2:2;
+	u32	fw:12;
+	u32	fh_l:8;
+
+	u32	fh_h:4;
+	u32	res3:28;
+
+	/* Word 1 */
+	u32	eba0;
+
+	u32	eba1;
+
+	u32	bpp:3;
+	u32	sl:14;
+	u32	pfs:3;
+	u32	bam:3;
+	u32	res4:2;
+	u32	npb:6;
+	u32	res5:1;
+
+	u32	sat:2;
+	u32	scc:1;
+	u32	ofs0:5;
+	u32	ofs1:5;
+	u32	ofs2:5;
+	u32	ofs3:5;
+	u32	wid0:3;
+	u32	wid1:3;
+	u32	wid2:3;
+
+	u32	wid3:3;
+	u32	dec_sel:1;
+	u32	res6:28;
+} __attribute__ ((packed));
+
+union chan_param_mem {
+	struct chan_param_mem_planar		pp;
+	struct chan_param_mem_interleaved	ip;
+};
+
+static void ipu_ch_param_set_plane_offset(union chan_param_mem *params,
+					  u32 u_offset, u32 v_offset)
+{
+	params->pp.ubo_l = u_offset & 0x7ff;
+	params->pp.ubo_h = u_offset >> 11;
+	params->pp.vbo_l = v_offset & 0x1ffff;
+	params->pp.vbo_h = v_offset >> 17;
+}
+
+static void ipu_ch_param_set_size(union chan_param_mem *params,
+				  uint32_t pixel_fmt, uint16_t width,
+				  uint16_t height, uint16_t stride)
+{
+	u32 u_offset;
+	u32 v_offset;
+
+	params->pp.fw		= width - 1;
+	params->pp.fh_l		= height - 1;
+	params->pp.fh_h		= (height - 1) >> 8;
+	params->pp.sl		= stride - 1;
+
+	switch (pixel_fmt) {
+	case IPU_PIX_FMT_GENERIC:
+		/*Represents 8-bit Generic data */
+		params->pp.bpp	= 3;
+		params->pp.pfs	= 7;
+		params->pp.npb	= 31;
+		params->pp.sat	= 2;		/* SAT = use 32-bit access */
+		break;
+	case IPU_PIX_FMT_GENERIC_32:
+		/*Represents 32-bit Generic data */
+		params->pp.bpp	= 0;
+		params->pp.pfs	= 7;
+		params->pp.npb	= 7;
+		params->pp.sat	= 2;		/* SAT = use 32-bit access */
+		break;
+	case IPU_PIX_FMT_RGB565:
+		params->ip.bpp	= 2;
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 0;		/* Red bit offset */
+		params->ip.ofs1	= 5;		/* Green bit offset */
+		params->ip.ofs2	= 11;		/* Blue bit offset */
+		params->ip.ofs3	= 16;		/* Alpha bit offset */
+		params->ip.wid0	= 4;		/* Red bit width - 1 */
+		params->ip.wid1	= 5;		/* Green bit width - 1 */
+		params->ip.wid2	= 4;		/* Blue bit width - 1 */
+		break;
+	case IPU_PIX_FMT_BGR24:
+		params->ip.bpp	= 1;		/* 24 BPP & RGB PFS */
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 0;		/* Red bit offset */
+		params->ip.ofs1	= 8;		/* Green bit offset */
+		params->ip.ofs2	= 16;		/* Blue bit offset */
+		params->ip.ofs3	= 24;		/* Alpha bit offset */
+		params->ip.wid0	= 7;		/* Red bit width - 1 */
+		params->ip.wid1	= 7;		/* Green bit width - 1 */
+		params->ip.wid2	= 7;		/* Blue bit width - 1 */
+		break;
+	case IPU_PIX_FMT_RGB24:
+		params->ip.bpp	= 1;		/* 24 BPP & RGB PFS */
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 16;		/* Red bit offset */
+		params->ip.ofs1	= 8;		/* Green bit offset */
+		params->ip.ofs2	= 0;		/* Blue bit offset */
+		params->ip.ofs3	= 24;		/* Alpha bit offset */
+		params->ip.wid0	= 7;		/* Red bit width - 1 */
+		params->ip.wid1	= 7;		/* Green bit width - 1 */
+		params->ip.wid2	= 7;		/* Blue bit width - 1 */
+		break;
+	case IPU_PIX_FMT_BGRA32:
+	case IPU_PIX_FMT_BGR32:
+		params->ip.bpp	= 0;
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 8;		/* Red bit offset */
+		params->ip.ofs1	= 16;		/* Green bit offset */
+		params->ip.ofs2	= 24;		/* Blue bit offset */
+		params->ip.ofs3	= 0;		/* Alpha bit offset */
+		params->ip.wid0	= 7;		/* Red bit width - 1 */
+		params->ip.wid1	= 7;		/* Green bit width - 1 */
+		params->ip.wid2	= 7;		/* Blue bit width - 1 */
+		params->ip.wid3	= 7;		/* Alpha bit width - 1 */
+		break;
+	case IPU_PIX_FMT_RGBA32:
+	case IPU_PIX_FMT_RGB32:
+		params->ip.bpp	= 0;
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 24;		/* Red bit offset */
+		params->ip.ofs1	= 16;		/* Green bit offset */
+		params->ip.ofs2	= 8;		/* Blue bit offset */
+		params->ip.ofs3	= 0;		/* Alpha bit offset */
+		params->ip.wid0	= 7;		/* Red bit width - 1 */
+		params->ip.wid1	= 7;		/* Green bit width - 1 */
+		params->ip.wid2	= 7;		/* Blue bit width - 1 */
+		params->ip.wid3	= 7;		/* Alpha bit width - 1 */
+		break;
+	case IPU_PIX_FMT_ABGR32:
+		params->ip.bpp	= 0;
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 8;		/* Red bit offset */
+		params->ip.ofs1	= 16;		/* Green bit offset */
+		params->ip.ofs2	= 24;		/* Blue bit offset */
+		params->ip.ofs3	= 0;		/* Alpha bit offset */
+		params->ip.wid0	= 7;		/* Red bit width - 1 */
+		params->ip.wid1	= 7;		/* Green bit width - 1 */
+		params->ip.wid2	= 7;		/* Blue bit width - 1 */
+		params->ip.wid3	= 7;		/* Alpha bit width - 1 */
+		break;
+	case IPU_PIX_FMT_UYVY:
+		params->ip.bpp	= 2;
+		params->ip.pfs	= 6;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		break;
+	case IPU_PIX_FMT_YUV420P2:
+	case IPU_PIX_FMT_YUV420P:
+		params->ip.bpp	= 3;
+		params->ip.pfs	= 3;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		u_offset = stride * height;
+		v_offset = u_offset + u_offset / 4;
+		ipu_ch_param_set_plane_offset(params, u_offset, v_offset);
+		break;
+	case IPU_PIX_FMT_YVU422P:
+		params->ip.bpp	= 3;
+		params->ip.pfs	= 2;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		v_offset = stride * height;
+		u_offset = v_offset + v_offset / 2;
+		ipu_ch_param_set_plane_offset(params, u_offset, v_offset);
+		break;
+	case IPU_PIX_FMT_YUV422P:
+		params->ip.bpp	= 3;
+		params->ip.pfs	= 2;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		u_offset = stride * height;
+		v_offset = u_offset + u_offset / 2;
+		ipu_ch_param_set_plane_offset(params, u_offset, v_offset);
+		break;
+	default:
+		dev_err(ipu_data.dev,
+			"mxc ipu: unimplemented pixel format %d\n", pixel_fmt);
+		break;
+	}
+
+	params->pp.nsb = 1;
+}
+
+static void ipu_ch_param_set_burst_size(union chan_param_mem *params,
+					uint16_t burst_pixels)
+{
+	params->pp.npb = burst_pixels - 1;
+};
+
+static void ipu_ch_param_set_buffer(union chan_param_mem *params,
+				    dma_addr_t buf0, dma_addr_t buf1)
+{
+	params->pp.eba0 = buf0;
+	params->pp.eba1 = buf1;
+};
+
+static void ipu_ch_param_set_rotation(union chan_param_mem *params,
+				      enum ipu_rotate_mode rotate)
+{
+	params->pp.bam = rotate;
+};
+
+static void ipu_write_param_mem(uint32_t addr, uint32_t *data,
+				uint32_t num_words)
+{
+	for (; num_words > 0; num_words--) {
+		dev_dbg(ipu_data.dev,
+			"write param mem - addr = 0x%08X, data = 0x%08X\n",
+			addr, *data);
+		idmac_write_ipureg(&ipu_data, addr, IPU_IMA_ADDR);
+		idmac_write_ipureg(&ipu_data, *data++, IPU_IMA_DATA);
+		addr++;
+		if ((addr & 0x7) == 5) {
+			addr &= ~0x7;	/* set to word 0 */
+			addr += 8;	/* increment to next row */
+		}
+	}
+}
+
+static int calc_resize_coeffs(uint32_t in_size, uint32_t out_size,
+			      uint32_t *resize_coeff,
+			      uint32_t *downsize_coeff)
+{
+	uint32_t temp_size;
+	uint32_t temp_downsize;
+
+	*resize_coeff	= 1 << 13;
+	*downsize_coeff	= 1 << 13;
+
+	/* Cannot downsize more than 8:1 */
+	if (out_size << 3 < in_size)
+		return -EINVAL;
+
+	/* compute downsizing coefficient */
+	temp_downsize = 0;
+	temp_size = in_size;
+	while (temp_size >= out_size * 2 && temp_downsize < 2) {
+		temp_size >>= 1;
+		temp_downsize++;
+	}
+	*downsize_coeff = temp_downsize;
+
+	/*
+	 * compute resizing coefficient using the following formula:
+	 * resize_coeff = M*(SI -1)/(SO - 1)
+	 * where M = 2^13, SI - input size, SO - output size
+	 */
+	*resize_coeff = (8192L * (temp_size - 1)) / (out_size - 1);
+	if (*resize_coeff >= 16384L) {
+		dev_err(ipu_data.dev, "Warning! Overflow on resize coeff.\n");
+		*resize_coeff = 0x3FFF;
+	}
+
+	dev_dbg(ipu_data.dev, "resizing from %u -> %u pixels, "
+		"downsize=%u, resize=%u.%lu (reg=%u)\n", in_size, out_size,
+		*downsize_coeff, *resize_coeff >= 8192L ? 1 : 0,
+		((*resize_coeff & 0x1FFF) * 10000L) / 8192L, *resize_coeff);
+
+	return 0;
+}
+
+static enum ipu_color_space format_to_colorspace(enum pixel_fmt fmt)
+{
+	switch (fmt) {
+	case IPU_PIX_FMT_RGB565:
+	case IPU_PIX_FMT_BGR24:
+	case IPU_PIX_FMT_RGB24:
+	case IPU_PIX_FMT_BGR32:
+	case IPU_PIX_FMT_RGB32:
+		return IPU_COLORSPACE_RGB;
+	default:
+		return IPU_COLORSPACE_YCBCR;
+	}
+}
+
+static int ipu_ic_init_prpenc(struct ipu *ipu,
+			      union ipu_channel_param *params, bool src_is_csi)
+{
+	uint32_t reg, ic_conf;
+	uint32_t downsize_coeff, resize_coeff;
+	enum ipu_color_space in_fmt, out_fmt;
+
+	/* Setup vertical resizing */
+	calc_resize_coeffs(params->video.in_height,
+			    params->video.out_height,
+			    &resize_coeff, &downsize_coeff);
+	reg = (downsize_coeff << 30) | (resize_coeff << 16);
+
+	/* Setup horizontal resizing */
+	calc_resize_coeffs(params->video.in_width,
+			    params->video.out_width,
+			    &resize_coeff, &downsize_coeff);
+	reg |= (downsize_coeff << 14) | resize_coeff;
+
+	/* Setup color space conversion */
+	in_fmt = format_to_colorspace(params->video.in_pixel_fmt);
+	out_fmt = format_to_colorspace(params->video.out_pixel_fmt);
+
+	/*
+	 * Colourspace conversion unsupported yet - see _init_csc() in
+	 * Freescale sources
+	 */
+	if (in_fmt != out_fmt) {
+		dev_err(ipu->dev, "Colourspace conversion unsupported!\n");
+		return -EOPNOTSUPP;
+	}
+
+	idmac_write_icreg(ipu, reg, IC_PRP_ENC_RSC);
+
+	ic_conf = idmac_read_icreg(ipu, IC_CONF);
+
+	if (src_is_csi)
+		ic_conf &= ~IC_CONF_RWS_EN;
+	else
+		ic_conf |= IC_CONF_RWS_EN;
+
+	idmac_write_icreg(ipu, ic_conf, IC_CONF);
+
+	return 0;
+}
+
+static uint32_t dma_param_addr(uint32_t dma_ch)
+{
+	/* Channel Parameter Memory */
+	return 0x10000 | (dma_ch << 4);
+};
+
+static void ipu_channel_set_priority(struct ipu *ipu, enum ipu_channel channel,
+				     bool prio)
+{
+	u32 reg = idmac_read_icreg(ipu, IDMAC_CHA_PRI);
+
+	if (prio)
+		reg |= 1UL << channel;
+	else
+		reg &= ~(1UL << channel);
+
+	idmac_write_icreg(ipu, reg, IDMAC_CHA_PRI);
+
+	dump_idmac_reg(ipu);
+}
+
+static uint32_t ipu_channel_conf_mask(enum ipu_channel channel)
+{
+	uint32_t mask;
+
+	switch (channel) {
+	case IDMAC_IC_0:
+	case IDMAC_IC_7:
+		mask = IPU_CONF_CSI_EN | IPU_CONF_IC_EN;
+		break;
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+		mask = IPU_CONF_SDC_EN | IPU_CONF_DI_EN;
+		break;
+	default:
+		mask = 0;
+		break;
+	}
+
+	return mask;
+}
+
+/**
+ * ipu_enable_channel() - enable an IPU channel.
+ * @channel:	channel ID.
+ * @return:	0 on success or negative error code on failure.
+ */
+static int ipu_enable_channel(struct idmac *idmac, struct idmac_channel *ichan)
+{
+	struct ipu *ipu = to_ipu(idmac);
+	enum ipu_channel channel = ichan->dma_chan.chan_id;
+	uint32_t reg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ipu->lock, flags);
+
+	/* Reset to buffer 0 */
+	idmac_write_ipureg(ipu, 1UL << channel, IPU_CHA_CUR_BUF);
+	ichan->active_buffer = 0;
+	ichan->status = IPU_CHANNEL_ENABLED;
+
+	switch (channel) {
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+	case IDMAC_IC_7:
+		ipu_channel_set_priority(ipu, channel, true);
+	default:
+		break;
+	}
+
+	reg = idmac_read_icreg(ipu, IDMAC_CHA_EN);
+
+	idmac_write_icreg(ipu, reg | (1UL << channel), IDMAC_CHA_EN);
+
+	ipu_ic_enable_task(ipu, channel);
+
+	spin_unlock_irqrestore(&ipu->lock, flags);
+	return 0;
+}
+
+/**
+ * ipu_init_channel_buffer() - initialize a buffer for logical IPU channel.
+ * @channel:	channel ID.
+ * @pixel_fmt:	pixel format of buffer. Pixel format is a FOURCC ASCII code.
+ * @width:	width of buffer in pixels.
+ * @height:	height of buffer in pixels.
+ * @stride:	stride length of buffer in pixels.
+ * @rot_mode:	rotation mode of buffer. A rotation setting other than
+ *		IPU_ROTATE_VERT_FLIP should only be used for input buffers of
+ *		rotation channels.
+ * @phyaddr_0:	buffer 0 physical address.
+ * @phyaddr_1:	buffer 1 physical address. Setting this to a value other than
+ *		NULL enables double buffering mode.
+ * @return:	0 on success or negative error code on failure.
+ */
+static int ipu_init_channel_buffer(struct idmac_channel *ichan,
+				   enum pixel_fmt pixel_fmt,
+				   uint16_t width, uint16_t height,
+				   uint32_t stride,
+				   enum ipu_rotate_mode rot_mode,
+				   dma_addr_t phyaddr_0, dma_addr_t phyaddr_1)
+{
+	enum ipu_channel channel = ichan->dma_chan.chan_id;
+	struct idmac *idmac = to_idmac(ichan->dma_chan.device);
+	struct ipu *ipu = to_ipu(idmac);
+	union chan_param_mem params = {};
+	unsigned long flags;
+	uint32_t reg;
+	uint32_t stride_bytes;
+
+	stride_bytes = stride * bytes_per_pixel(pixel_fmt);
+
+	if (stride_bytes % 4) {
+		dev_err(ipu->dev,
+			"Stride length must be 32-bit aligned, stride = %d, bytes = %d\n",
+			stride, stride_bytes);
+		return -EINVAL;
+	}
+
+	/* IC channel's stride must be a multiple of 8 pixels */
+	if ((channel <= 13) && (stride % 8)) {
+		dev_err(ipu->dev, "Stride must be 8 pixel multiple\n");
+		return -EINVAL;
+	}
+
+	/* Build parameter memory data for DMA channel */
+	ipu_ch_param_set_size(&params, pixel_fmt, width, height, stride_bytes);
+	ipu_ch_param_set_buffer(&params, phyaddr_0, phyaddr_1);
+	ipu_ch_param_set_rotation(&params, rot_mode);
+	/* Some channels (rotation) have restriction on burst length */
+	switch (channel) {
+	case IDMAC_IC_7:	/* Hangs with burst 8, 16, other values
+				   invalid - Table 44-30 */
+/*
+		ipu_ch_param_set_burst_size(&params, 8);
+ */
+		break;
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+		/* In original code only IPU_PIX_FMT_RGB565 was setting burst */
+		ipu_ch_param_set_burst_size(&params, 16);
+		break;
+	case IDMAC_IC_0:
+	default:
+		break;
+	}
+
+	spin_lock_irqsave(&ipu->lock, flags);
+
+	ipu_write_param_mem(dma_param_addr(channel), (uint32_t *)&params, 10);
+
+	reg = idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL);
+
+	if (phyaddr_1)
+		reg |= 1UL << channel;
+	else
+		reg &= ~(1UL << channel);
+
+	idmac_write_ipureg(ipu, reg, IPU_CHA_DB_MODE_SEL);
+
+	ichan->status = IPU_CHANNEL_READY;
+
+	spin_unlock_irqrestore(ipu->lock, flags);
+
+	return 0;
+}
+
+/**
+ * ipu_select_buffer() - mark a channel's buffer as ready.
+ * @channel:	channel ID.
+ * @buffer_n:	buffer number to mark ready.
+ */
+static void ipu_select_buffer(enum ipu_channel channel, int buffer_n)
+{
+	/* No locking - this is a write-one-to-set register, cleared by IPU */
+	if (buffer_n == 0)
+		/* Mark buffer 0 as ready. */
+		idmac_write_ipureg(&ipu_data, 1UL << channel, IPU_CHA_BUF0_RDY);
+	else
+		/* Mark buffer 1 as ready. */
+		idmac_write_ipureg(&ipu_data, 1UL << channel, IPU_CHA_BUF1_RDY);
+}
+
+/**
+ * ipu_update_channel_buffer() - update physical address of a channel buffer.
+ * @channel:	channel ID.
+ * @buffer_n:	buffer number to update.
+ *		0 or 1 are the only valid values.
+ * @phyaddr:	buffer physical address.
+ * @return:	Returns 0 on success or negative error code on failure. This
+ *              function will fail if the buffer is set to ready.
+ */
+/* Called under spin_lock(_irqsave)(&ichan->lock) */
+static int ipu_update_channel_buffer(enum ipu_channel channel,
+				     int buffer_n, dma_addr_t phyaddr)
+{
+	uint32_t reg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ipu_data.lock, flags);
+
+	if (buffer_n == 0) {
+		reg = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF0_RDY);
+		if (reg & (1UL << channel)) {
+			spin_unlock_irqrestore(&ipu_data.lock, flags);
+			return -EACCES;
+		}
+
+		/* 44.3.3.1.9 - Row Number 1 (WORD1, offset 0) */
+		idmac_write_ipureg(&ipu_data, dma_param_addr(channel) +
+				   0x0008UL, IPU_IMA_ADDR);
+		idmac_write_ipureg(&ipu_data, phyaddr, IPU_IMA_DATA);
+	} else {
+		reg = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF1_RDY);
+		if (reg & (1UL << channel)) {
+			spin_unlock_irqrestore(&ipu_data.lock, flags);
+			return -EACCES;
+		}
+
+		/* Check if double-buffering is already enabled */
+		reg = idmac_read_ipureg(&ipu_data, IPU_CHA_DB_MODE_SEL);
+
+		if (!(reg & (1UL << channel)))
+			idmac_write_ipureg(&ipu_data, reg | (1UL << channel),
+					   IPU_CHA_DB_MODE_SEL);
+
+		/* 44.3.3.1.9 - Row Number 1 (WORD1, offset 1) */
+		idmac_write_ipureg(&ipu_data, dma_param_addr(channel) +
+				   0x0009UL, IPU_IMA_ADDR);
+		idmac_write_ipureg(&ipu_data, phyaddr, IPU_IMA_DATA);
+	}
+
+	spin_unlock_irqrestore(&ipu_data.lock, flags);
+
+	return 0;
+}
+
+/* Called under spin_lock_irqsave(&ichan->lock) */
+static int ipu_submit_channel_buffers(struct idmac_channel *ichan,
+				      struct idmac_tx_desc *desc)
+{
+	struct scatterlist *sg;
+	int i, ret = 0;
+
+	for (i = 0, sg = desc->sg; i < 2 && sg; i++) {
+		if (!ichan->sg[i]) {
+			ichan->sg[i] = sg;
+
+			/*
+			 * On first invocation this shouldn't be necessary, the
+			 * call to ipu_init_channel_buffer() above will set
+			 * addresses for us, so we could make it conditional
+			 * on status >= IPU_CHANNEL_ENABLED, but doing it again
+			 * shouldn't hurt either.
+			 */
+			ret = ipu_update_channel_buffer(ichan->dma_chan.chan_id, i,
+							sg_dma_address(sg));
+			if (ret < 0)
+				return ret;
+
+			ipu_select_buffer(ichan->dma_chan.chan_id, i);
+
+			sg = sg_next(sg);
+		}
+	}
+
+	return ret;
+}
+
+static dma_cookie_t idmac_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+	struct idmac_tx_desc *desc = to_tx_desc(tx);
+	struct idmac_channel *ichan = to_idmac_chan(tx->chan);
+	struct idmac *idmac = to_idmac(tx->chan->device);
+	struct ipu *ipu = to_ipu(idmac);
+	dma_cookie_t cookie;
+	unsigned long flags;
+
+	/* Sanity check */
+	if (!list_empty(&desc->list)) {
+		/* The descriptor doesn't belong to client */
+		dev_err(&ichan->dma_chan.dev->device,
+			"Descriptor %p not prepared!\n", tx);
+		return -EBUSY;
+	}
+
+	mutex_lock(&ichan->chan_mutex);
+
+	if (ichan->status < IPU_CHANNEL_READY) {
+		struct idmac_video_param *video = &ichan->params.video;
+		/*
+		 * Initial buffer assignment - the first two sg-entries from
+		 * the descriptor will end up in the IDMAC buffers
+		 */
+		dma_addr_t dma_1 = sg_is_last(desc->sg) ? 0 :
+			sg_dma_address(&desc->sg[1]);
+
+		WARN_ON(ichan->sg[0] || ichan->sg[1]);
+
+		cookie = ipu_init_channel_buffer(ichan,
+						 video->out_pixel_fmt,
+						 video->out_width,
+						 video->out_height,
+						 video->out_stride,
+						 IPU_ROTATE_NONE,
+						 sg_dma_address(&desc->sg[0]),
+						 dma_1);
+		if (cookie < 0)
+			goto out;
+	}
+
+	/* ipu->lock can be taken under ichan->lock, but not v.v. */
+	spin_lock_irqsave(&ichan->lock, flags);
+
+	/* submit_buffers() atomically verifies and fills empty sg slots */
+	cookie = ipu_submit_channel_buffers(ichan, desc);
+
+	spin_unlock_irqrestore(&ichan->lock, flags);
+
+	if (cookie < 0)
+		goto out;
+
+	cookie = ichan->dma_chan.cookie;
+
+	if (++cookie < 0)
+		cookie = 1;
+
+	/* from dmaengine.h: "last cookie value returned to client" */
+	ichan->dma_chan.cookie = cookie;
+	tx->cookie = cookie;
+	spin_lock_irqsave(&ichan->lock, flags);
+	list_add_tail(&desc->list, &ichan->queue);
+	spin_unlock_irqrestore(&ichan->lock, flags);
+
+	if (ichan->status < IPU_CHANNEL_ENABLED) {
+		int ret = ipu_enable_channel(idmac, ichan);
+		if (ret < 0) {
+			cookie = ret;
+			spin_lock_irqsave(&ichan->lock, flags);
+			list_del_init(&desc->list);
+			spin_unlock_irqrestore(&ichan->lock, flags);
+			tx->cookie = cookie;
+			ichan->dma_chan.cookie = cookie;
+		}
+	}
+
+	dump_idmac_reg(ipu);
+
+out:
+	mutex_unlock(&ichan->chan_mutex);
+
+	return cookie;
+}
+
+/* Called with ichan->chan_mutex held */
+static int idmac_desc_alloc(struct idmac_channel *ichan, int n)
+{
+	struct idmac_tx_desc *desc = vmalloc(n * sizeof(struct idmac_tx_desc));
+	struct idmac *idmac = to_idmac(ichan->dma_chan.device);
+
+	if (!desc)
+		return -ENOMEM;
+
+	/* No interrupts, just disable the tasklet for a moment */
+	tasklet_disable(&to_ipu(idmac)->tasklet);
+
+	ichan->n_tx_desc = n;
+	ichan->desc = desc;
+	INIT_LIST_HEAD(&ichan->queue);
+	INIT_LIST_HEAD(&ichan->free_list);
+
+	while (n--) {
+		struct dma_async_tx_descriptor *txd = &desc->txd;
+
+		memset(txd, 0, sizeof(*txd));
+		dma_async_tx_descriptor_init(txd, &ichan->dma_chan);
+		txd->tx_submit		= idmac_tx_submit;
+		txd->chan		= &ichan->dma_chan;
+		INIT_LIST_HEAD(&txd->tx_list);
+
+		list_add(&desc->list, &ichan->free_list);
+
+		desc++;
+	}
+
+	tasklet_enable(&to_ipu(idmac)->tasklet);
+
+	return 0;
+}
+
+/**
+ * ipu_init_channel() - initialize an IPU channel.
+ * @idmac:	IPU DMAC context.
+ * @ichan:	pointer to the channel object.
+ * @return      0 on success or negative error code on failure.
+ */
+static int ipu_init_channel(struct idmac *idmac, struct idmac_channel *ichan)
+{
+	union ipu_channel_param *params = &ichan->params;
+	uint32_t ipu_conf;
+	enum ipu_channel channel = ichan->dma_chan.chan_id;
+	unsigned long flags;
+	uint32_t reg;
+	struct ipu *ipu = to_ipu(idmac);
+	int ret = 0, n_desc = 0;
+
+	dev_dbg(ipu->dev, "init channel = %d\n", channel);
+
+	if (channel != IDMAC_SDC_0 && channel != IDMAC_SDC_1 &&
+	    channel != IDMAC_IC_7)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ipu->lock, flags);
+
+	switch (channel) {
+	case IDMAC_IC_7:
+		n_desc = 16;
+		reg = idmac_read_icreg(ipu, IC_CONF);
+		idmac_write_icreg(ipu, reg & ~IC_CONF_CSI_MEM_WR_EN, IC_CONF);
+		break;
+	case IDMAC_IC_0:
+		n_desc = 16;
+		reg = idmac_read_ipureg(ipu, IPU_FS_PROC_FLOW);
+		idmac_write_ipureg(ipu, reg & ~FS_ENC_IN_VALID, IPU_FS_PROC_FLOW);
+		ret = ipu_ic_init_prpenc(ipu, params, true);
+		break;
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+		n_desc = 4;
+	default:
+		break;
+	}
+
+	ipu->channel_init_mask |= 1L << channel;
+
+	/* Enable IPU sub module */
+	ipu_conf = idmac_read_ipureg(ipu, IPU_CONF) |
+		ipu_channel_conf_mask(channel);
+	idmac_write_ipureg(ipu, ipu_conf, IPU_CONF);
+
+	spin_unlock_irqrestore(&ipu->lock, flags);
+
+	if (n_desc && !ichan->desc)
+		ret = idmac_desc_alloc(ichan, n_desc);
+
+	dump_idmac_reg(ipu);
+
+	return ret;
+}
+
+/**
+ * ipu_uninit_channel() - uninitialize an IPU channel.
+ * @idmac:	IPU DMAC context.
+ * @ichan:	pointer to the channel object.
+ */
+static void ipu_uninit_channel(struct idmac *idmac, struct idmac_channel *ichan)
+{
+	enum ipu_channel channel = ichan->dma_chan.chan_id;
+	unsigned long flags;
+	uint32_t reg;
+	unsigned long chan_mask = 1UL << channel;
+	uint32_t ipu_conf;
+	struct ipu *ipu = to_ipu(idmac);
+
+	spin_lock_irqsave(&ipu->lock, flags);
+
+	if (!(ipu->channel_init_mask & chan_mask)) {
+		dev_err(ipu->dev, "Channel already uninitialized %d\n",
+			channel);
+		spin_unlock_irqrestore(&ipu->lock, flags);
+		return;
+	}
+
+	/* Reset the double buffer */
+	reg = idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL);
+	idmac_write_ipureg(ipu, reg & ~chan_mask, IPU_CHA_DB_MODE_SEL);
+
+	ichan->sec_chan_en = false;
+
+	switch (channel) {
+	case IDMAC_IC_7:
+		reg = idmac_read_icreg(ipu, IC_CONF);
+		idmac_write_icreg(ipu, reg & ~(IC_CONF_RWS_EN | IC_CONF_PRPENC_EN),
+			     IC_CONF);
+		break;
+	case IDMAC_IC_0:
+		reg = idmac_read_icreg(ipu, IC_CONF);
+		idmac_write_icreg(ipu, reg & ~(IC_CONF_PRPENC_EN | IC_CONF_PRPENC_CSC1),
+				  IC_CONF);
+		break;
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+	default:
+		break;
+	}
+
+	ipu->channel_init_mask &= ~(1L << channel);
+
+	ipu_conf = idmac_read_ipureg(ipu, IPU_CONF) &
+		~ipu_channel_conf_mask(channel);
+	idmac_write_ipureg(ipu, ipu_conf, IPU_CONF);
+
+	spin_unlock_irqrestore(&ipu->lock, flags);
+
+	ichan->n_tx_desc = 0;
+	vfree(ichan->desc);
+	ichan->desc = NULL;
+}
+
+/**
+ * ipu_disable_channel() - disable an IPU channel.
+ * @idmac:		IPU DMAC context.
+ * @ichan:		channel object pointer.
+ * @wait_for_stop:	flag to set whether to wait for channel end of frame or
+ *			return immediately.
+ * @return:		0 on success or negative error code on failure.
+ */
+static int ipu_disable_channel(struct idmac *idmac, struct idmac_channel *ichan,
+			       bool wait_for_stop)
+{
+	enum ipu_channel channel = ichan->dma_chan.chan_id;
+	struct ipu *ipu = to_ipu(idmac);
+	uint32_t reg;
+	unsigned long flags;
+	unsigned long chan_mask = 1UL << channel;
+	unsigned int timeout;
+
+	if (wait_for_stop && channel != IDMAC_SDC_1 && channel != IDMAC_SDC_0) {
+		timeout = 40;
+		/* This waiting always fails. Related to spurious irq problem */
+		while ((idmac_read_icreg(ipu, IDMAC_CHA_BUSY) & chan_mask) ||
+		       (ipu_channel_status(ipu, channel) == TASK_STAT_ACTIVE)) {
+			timeout--;
+			msleep(10);
+
+			if (!timeout) {
+				dev_dbg(ipu->dev,
+					"Warning: timeout waiting for channel %u to "
+					"stop: buf0_rdy = 0x%08X, buf1_rdy = 0x%08X, "
+					"busy = 0x%08X, tstat = 0x%08X\n", channel,
+					idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY),
+					idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY),
+					idmac_read_icreg(ipu, IDMAC_CHA_BUSY),
+					idmac_read_ipureg(ipu, IPU_TASKS_STAT));
+				break;
+			}
+		}
+		dev_dbg(ipu->dev, "timeout = %d * 10ms\n", 40 - timeout);
+	}
+	/* SDC BG and FG must be disabled before DMA is disabled */
+	if (wait_for_stop && (channel == IDMAC_SDC_0 ||
+			      channel == IDMAC_SDC_1)) {
+		for (timeout = 5;
+		     timeout && !ipu_irq_status(ichan->eof_irq); timeout--)
+			msleep(5);
+	}
+
+	spin_lock_irqsave(&ipu->lock, flags);
+
+	/* Disable IC task */
+	ipu_ic_disable_task(ipu, channel);
+
+	/* Disable DMA channel(s) */
+	reg = idmac_read_icreg(ipu, IDMAC_CHA_EN);
+	idmac_write_icreg(ipu, reg & ~chan_mask, IDMAC_CHA_EN);
+
+	/*
+	 * Problem (observed with channel DMAIC_7): after enabling the channel
+	 * and initialising buffers, there comes an interrupt with current still
+	 * pointing at buffer 0, whereas it should use buffer 0 first and only
+	 * generate an interrupt when it is done, then current should already
+	 * point to buffer 1. This spurious interrupt also comes on channel
+	 * DMASDC_0. With DMAIC_7 normally, is we just leave the ISR after the
+	 * first interrupt, there comes the second with current correctly
+	 * pointing to buffer 1 this time. But sometimes this second interrupt
+	 * doesn't come and the channel hangs. Clearing BUFx_RDY when disabling
+	 * the channel seems to prevent the channel from hanging, but it doesn't
+	 * prevent the spurious interrupt. This might also be unsafe. Think
+	 * about the IDMAC controller trying to switch to a buffer, when we
+	 * clear the ready bit, and re-enable it a moment later.
+	 */
+	reg = idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY);
+	idmac_write_ipureg(ipu, 0, IPU_CHA_BUF0_RDY);
+	idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF0_RDY);
+
+	reg = idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY);
+	idmac_write_ipureg(ipu, 0, IPU_CHA_BUF1_RDY);
+	idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF1_RDY);
+
+	spin_unlock_irqrestore(&ipu->lock, flags);
+
+	return 0;
+}
+
+/*
+ * We have several possibilities here:
+ * current BUF		next BUF
+ *
+ * not last sg		next not last sg
+ * not last sg		next last sg
+ * last sg		first sg from next descriptor
+ * last sg		NULL
+ *
+ * Besides, the descriptor queue might be empty or not. We process all these
+ * cases carefully.
+ */
+static irqreturn_t idmac_interrupt(int irq, void *dev_id)
+{
+	struct idmac_channel *ichan = dev_id;
+	unsigned int chan_id = ichan->dma_chan.chan_id;
+	struct scatterlist **sg, *sgnext, *sgnew = NULL;
+	/* Next transfer descriptor */
+	struct idmac_tx_desc *desc = NULL, *descnew;
+	dma_async_tx_callback callback;
+	void *callback_param;
+	bool done = false;
+	u32	ready0 = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF0_RDY),
+		ready1 = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF1_RDY),
+		curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF);
+
+	/* IDMAC has cleared the respective BUFx_RDY bit, we manage the buffer */
+
+	pr_debug("IDMAC irq %d\n", irq);
+	/* Other interrupts do not interfere with this channel */
+	spin_lock(&ichan->lock);
+
+	if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 &&
+		     ((curbuf >> chan_id) & 1) == ichan->active_buffer)) {
+		int i = 100;
+
+		/* This doesn't help. See comment in ipu_disable_channel() */
+		while (--i) {
+			curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF);
+			if (((curbuf >> chan_id) & 1) != ichan->active_buffer)
+				break;
+			cpu_relax();
+		}
+
+		if (!i) {
+			spin_unlock(&ichan->lock);
+			dev_dbg(ichan->dma_chan.device->dev,
+				"IRQ on active buffer on channel %x, active "
+				"%d, ready %x, %x, current %x!\n", chan_id,
+				ichan->active_buffer, ready0, ready1, curbuf);
+			return IRQ_NONE;
+		}
+	}
+
+	if (unlikely((ichan->active_buffer && (ready1 >> chan_id) & 1) ||
+		     (!ichan->active_buffer && (ready0 >> chan_id) & 1)
+		     )) {
+		spin_unlock(&ichan->lock);
+		dev_dbg(ichan->dma_chan.device->dev,
+			"IRQ with active buffer still ready on channel %x, "
+			"active %d, ready %x, %x!\n", chan_id,
+			ichan->active_buffer, ready0, ready1);
+		return IRQ_NONE;
+	}
+
+	if (unlikely(list_empty(&ichan->queue))) {
+		spin_unlock(&ichan->lock);
+		dev_err(ichan->dma_chan.device->dev,
+			"IRQ without queued buffers on channel %x, active %d, "
+			"ready %x, %x!\n", chan_id,
+			ichan->active_buffer, ready0, ready1);
+		return IRQ_NONE;
+	}
+
+	/*
+	 * active_buffer is a software flag, it shows which buffer we are
+	 * currently expecting back from the hardware, IDMAC should be
+	 * processing the other buffer already
+	 */
+	sg = &ichan->sg[ichan->active_buffer];
+	sgnext = ichan->sg[!ichan->active_buffer];
+
+	/*
+	 * if sgnext == NULL sg must be the last element in a scatterlist and
+	 * queue must be empty
+	 */
+	if (unlikely(!sgnext)) {
+		if (unlikely(sg_next(*sg))) {
+			dev_err(ichan->dma_chan.device->dev,
+				"Broken buffer-update locking on channel %x!\n",
+				chan_id);
+			/* We'll let the user catch up */
+		} else {
+			/* Underrun */
+			ipu_ic_disable_task(&ipu_data, chan_id);
+			dev_dbg(ichan->dma_chan.device->dev,
+				"Underrun on channel %x\n", chan_id);
+			ichan->status = IPU_CHANNEL_READY;
+			/* Continue to check for complete descriptor */
+		}
+	}
+
+	desc = list_entry(ichan->queue.next, struct idmac_tx_desc, list);
+
+	/* First calculate and submit the next sg element */
+	if (likely(sgnext))
+		sgnew = sg_next(sgnext);
+
+	if (unlikely(!sgnew)) {
+		/* Start a new scatterlist, if any queued */
+		if (likely(desc->list.next != &ichan->queue)) {
+			descnew = list_entry(desc->list.next,
+					     struct idmac_tx_desc, list);
+			sgnew = &descnew->sg[0];
+		}
+	}
+
+	if (unlikely(!sg_next(*sg)) || !sgnext) {
+		/*
+		 * Last element in scatterlist done, remove from the queue,
+		 * _init for debugging
+		 */
+		list_del_init(&desc->list);
+		done = true;
+	}
+
+	*sg = sgnew;
+
+	if (likely(sgnew)) {
+		int ret;
+
+		ret = ipu_update_channel_buffer(chan_id, ichan->active_buffer,
+						sg_dma_address(*sg));
+		if (ret < 0)
+			dev_err(ichan->dma_chan.device->dev,
+				"Failed to update buffer on channel %x buffer %d!\n",
+				chan_id, ichan->active_buffer);
+		else
+			ipu_select_buffer(chan_id, ichan->active_buffer);
+	}
+
+	/* Flip the active buffer - even if update above failed */
+	ichan->active_buffer = !ichan->active_buffer;
+	if (done)
+		ichan->completed = desc->txd.cookie;
+
+	callback = desc->txd.callback;
+	callback_param = desc->txd.callback_param;
+
+	spin_unlock(&ichan->lock);
+
+	if (done && (desc->txd.flags & DMA_PREP_INTERRUPT) && callback)
+		callback(callback_param);
+
+	return IRQ_HANDLED;
+}
+
+static void ipu_gc_tasklet(unsigned long arg)
+{
+	struct ipu *ipu = (struct ipu *)arg;
+	int i;
+
+	for (i = 0; i < IPU_CHANNELS_NUM; i++) {
+		struct idmac_channel *ichan = ipu->channel + i;
+		struct idmac_tx_desc *desc;
+		unsigned long flags;
+		int j;
+
+		for (j = 0; j < ichan->n_tx_desc; j++) {
+			desc = ichan->desc + j;
+			spin_lock_irqsave(&ichan->lock, flags);
+			if (async_tx_test_ack(&desc->txd)) {
+				list_move(&desc->list, &ichan->free_list);
+				async_tx_clear_ack(&desc->txd);
+			}
+			spin_unlock_irqrestore(&ichan->lock, flags);
+		}
+	}
+}
+
+/*
+ * At the time .device_alloc_chan_resources() method is called, we cannot know,
+ * whether the client will accept the channel. Thus we must only check, if we
+ * can satisfy client's request but the only real criterion to verify, whether
+ * the client has accepted our offer is the client_count. That's why we have to
+ * perform the rest of our allocation tasks on the first call to this function.
+ */
+static struct dma_async_tx_descriptor *idmac_prep_slave_sg(struct dma_chan *chan,
+		struct scatterlist *sgl, unsigned int sg_len,
+		enum dma_data_direction direction, unsigned long tx_flags)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+	struct idmac_tx_desc *desc = NULL;
+	struct dma_async_tx_descriptor *txd = NULL;
+	unsigned long flags;
+
+	/* We only can handle these three channels so far */
+	if (ichan->dma_chan.chan_id != IDMAC_SDC_0 && ichan->dma_chan.chan_id != IDMAC_SDC_1 &&
+	    ichan->dma_chan.chan_id != IDMAC_IC_7)
+		return NULL;
+
+	if (direction != DMA_FROM_DEVICE && direction != DMA_TO_DEVICE) {
+		dev_err(chan->device->dev, "Invalid DMA direction %d!\n", direction);
+		return NULL;
+	}
+
+	mutex_lock(&ichan->chan_mutex);
+
+	spin_lock_irqsave(&ichan->lock, flags);
+	if (!list_empty(&ichan->free_list)) {
+		desc = list_entry(ichan->free_list.next,
+				  struct idmac_tx_desc, list);
+
+		list_del_init(&desc->list);
+
+		desc->sg_len	= sg_len;
+		desc->sg	= sgl;
+		txd		= &desc->txd;
+		txd->flags	= tx_flags;
+	}
+	spin_unlock_irqrestore(&ichan->lock, flags);
+
+	mutex_unlock(&ichan->chan_mutex);
+
+	tasklet_schedule(&to_ipu(to_idmac(chan->device))->tasklet);
+
+	return txd;
+}
+
+/* Re-select the current buffer and re-activate the channel */
+static void idmac_issue_pending(struct dma_chan *chan)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+	struct idmac *idmac = to_idmac(chan->device);
+	struct ipu *ipu = to_ipu(idmac);
+	unsigned long flags;
+
+	/* This is not always needed, but doesn't hurt either */
+	spin_lock_irqsave(&ipu->lock, flags);
+	ipu_select_buffer(ichan->dma_chan.chan_id, ichan->active_buffer);
+	spin_unlock_irqrestore(&ipu->lock, flags);
+
+	/*
+	 * Might need to perform some parts of initialisation from
+	 * ipu_enable_channel(), but not all, we do not want to reset to buffer
+	 * 0, don't need to set priority again either, but re-enabling the task
+	 * and the channel might be a good idea.
+	 */
+}
+
+static void __idmac_terminate_all(struct dma_chan *chan)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+	struct idmac *idmac = to_idmac(chan->device);
+	unsigned long flags;
+	int i;
+
+	ipu_disable_channel(idmac, ichan,
+			    ichan->status >= IPU_CHANNEL_ENABLED);
+
+	tasklet_disable(&to_ipu(idmac)->tasklet);
+
+	/* ichan->queue is modified in ISR, have to spinlock */
+	spin_lock_irqsave(&ichan->lock, flags);
+	list_splice_init(&ichan->queue, &ichan->free_list);
+
+	if (ichan->desc)
+		for (i = 0; i < ichan->n_tx_desc; i++) {
+			struct idmac_tx_desc *desc = ichan->desc + i;
+			if (list_empty(&desc->list))
+				/* Descriptor was prepared, but not submitted */
+				list_add(&desc->list,
+					 &ichan->free_list);
+
+			async_tx_clear_ack(&desc->txd);
+		}
+
+	ichan->sg[0] = NULL;
+	ichan->sg[1] = NULL;
+	spin_unlock_irqrestore(&ichan->lock, flags);
+
+	tasklet_enable(&to_ipu(idmac)->tasklet);
+
+	ichan->status = IPU_CHANNEL_INITIALIZED;
+}
+
+static void idmac_terminate_all(struct dma_chan *chan)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+
+	mutex_lock(&ichan->chan_mutex);
+
+	__idmac_terminate_all(chan);
+
+	mutex_unlock(&ichan->chan_mutex);
+}
+
+static int idmac_alloc_chan_resources(struct dma_chan *chan)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+	struct idmac *idmac = to_idmac(chan->device);
+	int ret;
+
+	/* dmaengine.c now guarantees to only offer free channels */
+	BUG_ON(chan->client_count > 1);
+	WARN_ON(ichan->status != IPU_CHANNEL_FREE);
+
+	chan->cookie		= 1;
+	ichan->completed	= -ENXIO;
+
+	ret = ipu_irq_map(ichan->dma_chan.chan_id);
+	if (ret < 0)
+		goto eimap;
+
+	ichan->eof_irq = ret;
+	ret = request_irq(ichan->eof_irq, idmac_interrupt, 0,
+			  ichan->eof_name, ichan);
+	if (ret < 0)
+		goto erirq;
+
+	ret = ipu_init_channel(idmac, ichan);
+	if (ret < 0)
+		goto eichan;
+
+	ichan->status = IPU_CHANNEL_INITIALIZED;
+
+	dev_dbg(&ichan->dma_chan.dev->device, "Found channel 0x%x, irq %d\n",
+		ichan->dma_chan.chan_id, ichan->eof_irq);
+
+	return ret;
+
+eichan:
+	free_irq(ichan->eof_irq, ichan);
+erirq:
+	ipu_irq_unmap(ichan->dma_chan.chan_id);
+eimap:
+	return ret;
+}
+
+static void idmac_free_chan_resources(struct dma_chan *chan)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+	struct idmac *idmac = to_idmac(chan->device);
+
+	mutex_lock(&ichan->chan_mutex);
+
+	__idmac_terminate_all(chan);
+
+	if (ichan->status > IPU_CHANNEL_FREE) {
+		free_irq(ichan->eof_irq, ichan);
+		ipu_irq_unmap(ichan->dma_chan.chan_id);
+	}
+
+	ichan->status = IPU_CHANNEL_FREE;
+
+	ipu_uninit_channel(idmac, ichan);
+
+	mutex_unlock(&ichan->chan_mutex);
+
+	tasklet_schedule(&to_ipu(idmac)->tasklet);
+}
+
+static enum dma_status idmac_is_tx_complete(struct dma_chan *chan,
+		dma_cookie_t cookie, dma_cookie_t *done, dma_cookie_t *used)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+
+	if (done)
+		*done = ichan->completed;
+	if (used)
+		*used = chan->cookie;
+	if (cookie != chan->cookie)
+		return DMA_ERROR;
+	return DMA_SUCCESS;
+}
+
+static int __init ipu_idmac_init(struct ipu *ipu)
+{
+	struct idmac *idmac = &ipu->idmac;
+	struct dma_device *dma = &idmac->dma;
+	int i;
+
+	dma_cap_set(DMA_SLAVE, dma->cap_mask);
+	dma_cap_set(DMA_PRIVATE, dma->cap_mask);
+
+	/* Compulsory common fields */
+	dma->dev				= ipu->dev;
+	dma->device_alloc_chan_resources	= idmac_alloc_chan_resources;
+	dma->device_free_chan_resources		= idmac_free_chan_resources;
+	dma->device_is_tx_complete		= idmac_is_tx_complete;
+	dma->device_issue_pending		= idmac_issue_pending;
+
+	/* Compulsory for DMA_SLAVE fields */
+	dma->device_prep_slave_sg		= idmac_prep_slave_sg;
+	dma->device_terminate_all		= idmac_terminate_all;
+
+	INIT_LIST_HEAD(&dma->channels);
+	for (i = 0; i < IPU_CHANNELS_NUM; i++) {
+		struct idmac_channel *ichan = ipu->channel + i;
+		struct dma_chan *dma_chan = &ichan->dma_chan;
+
+		spin_lock_init(&ichan->lock);
+		mutex_init(&ichan->chan_mutex);
+
+		ichan->status		= IPU_CHANNEL_FREE;
+		ichan->sec_chan_en	= false;
+		ichan->completed	= -ENXIO;
+		snprintf(ichan->eof_name, sizeof(ichan->eof_name), "IDMAC EOF %d", i);
+
+		dma_chan->device	= &idmac->dma;
+		dma_chan->cookie	= 1;
+		dma_chan->chan_id	= i;
+		list_add_tail(&ichan->dma_chan.device_node, &dma->channels);
+	}
+
+	idmac_write_icreg(ipu, 0x00000070, IDMAC_CONF);
+
+	return dma_async_device_register(&idmac->dma);
+}
+
+static void ipu_idmac_exit(struct ipu *ipu)
+{
+	int i;
+	struct idmac *idmac = &ipu->idmac;
+
+	for (i = 0; i < IPU_CHANNELS_NUM; i++) {
+		struct idmac_channel *ichan = ipu->channel + i;
+
+		idmac_terminate_all(&ichan->dma_chan);
+		idmac_prep_slave_sg(&ichan->dma_chan, NULL, 0, DMA_NONE, 0);
+	}
+
+	dma_async_device_unregister(&idmac->dma);
+}
+
+/*****************************************************************************
+ * IPU common probe / remove
+ */
+
+static int ipu_probe(struct platform_device *pdev)
+{
+	struct ipu_platform_data *pdata = pdev->dev.platform_data;
+	struct resource *mem_ipu, *mem_ic;
+	int ret;
+
+	spin_lock_init(&ipu_data.lock);
+
+	mem_ipu	= platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mem_ic	= platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!pdata || !mem_ipu || !mem_ic)
+		return -EINVAL;
+
+	ipu_data.dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, &ipu_data);
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		goto err_noirq;
+
+	ipu_data.irq_fn = ret;
+	ret = platform_get_irq(pdev, 1);
+	if (ret < 0)
+		goto err_noirq;
+
+	ipu_data.irq_err = ret;
+	ipu_data.irq_base = pdata->irq_base;
+
+	dev_dbg(&pdev->dev, "fn irq %u, err irq %u, irq-base %u\n",
+		ipu_data.irq_fn, ipu_data.irq_err, ipu_data.irq_base);
+
+	/* Remap IPU common registers */
+	ipu_data.reg_ipu = ioremap(mem_ipu->start,
+				   mem_ipu->end - mem_ipu->start + 1);
+	if (!ipu_data.reg_ipu) {
+		ret = -ENOMEM;
+		goto err_ioremap_ipu;
+	}
+
+	/* Remap Image Converter and Image DMA Controller registers */
+	ipu_data.reg_ic = ioremap(mem_ic->start,
+				  mem_ic->end - mem_ic->start + 1);
+	if (!ipu_data.reg_ic) {
+		ret = -ENOMEM;
+		goto err_ioremap_ic;
+	}
+
+	/* Get IPU clock */
+	ipu_data.ipu_clk = clk_get(&pdev->dev, "ipu_clk");
+	if (IS_ERR(ipu_data.ipu_clk)) {
+		ret = PTR_ERR(ipu_data.ipu_clk);
+		goto err_clk_get;
+	}
+
+	/* Make sure IPU HSP clock is running */
+	clk_enable(ipu_data.ipu_clk);
+
+	/* Disable all interrupts */
+	idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_1);
+	idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_2);
+	idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_3);
+	idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_4);
+	idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_5);
+
+	dev_dbg(&pdev->dev, "%s @ 0x%08lx, fn irq %u, err irq %u\n", pdev->name,
+		(unsigned long)mem_ipu->start, ipu_data.irq_fn, ipu_data.irq_err);
+
+	ret = ipu_irq_attach_irq(&ipu_data, pdev);
+	if (ret < 0)
+		goto err_attach_irq;
+
+	/* Initialize DMA engine */
+	ret = ipu_idmac_init(&ipu_data);
+	if (ret < 0)
+		goto err_idmac_init;
+
+	tasklet_init(&ipu_data.tasklet, ipu_gc_tasklet, (unsigned long)&ipu_data);
+
+	ipu_data.dev = &pdev->dev;
+
+	dev_dbg(ipu_data.dev, "IPU initialized\n");
+
+	return 0;
+
+err_idmac_init:
+err_attach_irq:
+	ipu_irq_detach_irq(&ipu_data, pdev);
+	clk_disable(ipu_data.ipu_clk);
+	clk_put(ipu_data.ipu_clk);
+err_clk_get:
+	iounmap(ipu_data.reg_ic);
+err_ioremap_ic:
+	iounmap(ipu_data.reg_ipu);
+err_ioremap_ipu:
+err_noirq:
+	dev_err(&pdev->dev, "Failed to probe IPU: %d\n", ret);
+	return ret;
+}
+
+static int ipu_remove(struct platform_device *pdev)
+{
+	struct ipu *ipu = platform_get_drvdata(pdev);
+
+	ipu_idmac_exit(ipu);
+	ipu_irq_detach_irq(ipu, pdev);
+	clk_disable(ipu->ipu_clk);
+	clk_put(ipu->ipu_clk);
+	iounmap(ipu->reg_ic);
+	iounmap(ipu->reg_ipu);
+	tasklet_kill(&ipu->tasklet);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+/*
+ * We need two MEM resources - with IPU-common and Image Converter registers,
+ * including PF_CONF and IDMAC_* registers, and two IRQs - function and error
+ */
+static struct platform_driver ipu_platform_driver = {
+	.driver = {
+		.name	= "ipu-core",
+		.owner	= THIS_MODULE,
+	},
+	.remove		= ipu_remove,
+};
+
+static int __init ipu_init(void)
+{
+	return platform_driver_probe(&ipu_platform_driver, ipu_probe);
+}
+subsys_initcall(ipu_init);
+
+MODULE_DESCRIPTION("IPU core driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>");
+MODULE_ALIAS("platform:ipu-core");
diff --git a/drivers/dma/ipu/ipu_intern.h b/drivers/dma/ipu/ipu_intern.h
new file mode 100644
index 00000000000..545cf11a94a
--- /dev/null
+++ b/drivers/dma/ipu/ipu_intern.h
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IPU_INTERN_H_
+#define _IPU_INTERN_H_
+
+#include <linux/dmaengine.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+
+/* IPU Common registers */
+#define IPU_CONF		0x00
+#define IPU_CHA_BUF0_RDY	0x04
+#define IPU_CHA_BUF1_RDY	0x08
+#define IPU_CHA_DB_MODE_SEL	0x0C
+#define IPU_CHA_CUR_BUF		0x10
+#define IPU_FS_PROC_FLOW	0x14
+#define IPU_FS_DISP_FLOW	0x18
+#define IPU_TASKS_STAT		0x1C
+#define IPU_IMA_ADDR		0x20
+#define IPU_IMA_DATA		0x24
+#define IPU_INT_CTRL_1		0x28
+#define IPU_INT_CTRL_2		0x2C
+#define IPU_INT_CTRL_3		0x30
+#define IPU_INT_CTRL_4		0x34
+#define IPU_INT_CTRL_5		0x38
+#define IPU_INT_STAT_1		0x3C
+#define IPU_INT_STAT_2		0x40
+#define IPU_INT_STAT_3		0x44
+#define IPU_INT_STAT_4		0x48
+#define IPU_INT_STAT_5		0x4C
+#define IPU_BRK_CTRL_1		0x50
+#define IPU_BRK_CTRL_2		0x54
+#define IPU_BRK_STAT		0x58
+#define IPU_DIAGB_CTRL		0x5C
+
+/* IPU_CONF Register bits */
+#define IPU_CONF_CSI_EN		0x00000001
+#define IPU_CONF_IC_EN		0x00000002
+#define IPU_CONF_ROT_EN		0x00000004
+#define IPU_CONF_PF_EN		0x00000008
+#define IPU_CONF_SDC_EN		0x00000010
+#define IPU_CONF_ADC_EN		0x00000020
+#define IPU_CONF_DI_EN		0x00000040
+#define IPU_CONF_DU_EN		0x00000080
+#define IPU_CONF_PXL_ENDIAN	0x00000100
+
+/* Image Converter Registers */
+#define IC_CONF			0x88
+#define IC_PRP_ENC_RSC		0x8C
+#define IC_PRP_VF_RSC		0x90
+#define IC_PP_RSC		0x94
+#define IC_CMBP_1		0x98
+#define IC_CMBP_2		0x9C
+#define PF_CONF			0xA0
+#define IDMAC_CONF		0xA4
+#define IDMAC_CHA_EN		0xA8
+#define IDMAC_CHA_PRI		0xAC
+#define IDMAC_CHA_BUSY		0xB0
+
+/* Image Converter Register bits */
+#define IC_CONF_PRPENC_EN	0x00000001
+#define IC_CONF_PRPENC_CSC1	0x00000002
+#define IC_CONF_PRPENC_ROT_EN	0x00000004
+#define IC_CONF_PRPVF_EN	0x00000100
+#define IC_CONF_PRPVF_CSC1	0x00000200
+#define IC_CONF_PRPVF_CSC2	0x00000400
+#define IC_CONF_PRPVF_CMB	0x00000800
+#define IC_CONF_PRPVF_ROT_EN	0x00001000
+#define IC_CONF_PP_EN		0x00010000
+#define IC_CONF_PP_CSC1		0x00020000
+#define IC_CONF_PP_CSC2		0x00040000
+#define IC_CONF_PP_CMB		0x00080000
+#define IC_CONF_PP_ROT_EN	0x00100000
+#define IC_CONF_IC_GLB_LOC_A	0x10000000
+#define IC_CONF_KEY_COLOR_EN	0x20000000
+#define IC_CONF_RWS_EN		0x40000000
+#define IC_CONF_CSI_MEM_WR_EN	0x80000000
+
+#define IDMA_CHAN_INVALID	0x000000FF
+#define IDMA_IC_0		0x00000001
+#define IDMA_IC_1		0x00000002
+#define IDMA_IC_2		0x00000004
+#define IDMA_IC_3		0x00000008
+#define IDMA_IC_4		0x00000010
+#define IDMA_IC_5		0x00000020
+#define IDMA_IC_6		0x00000040
+#define IDMA_IC_7		0x00000080
+#define IDMA_IC_8		0x00000100
+#define IDMA_IC_9		0x00000200
+#define IDMA_IC_10		0x00000400
+#define IDMA_IC_11		0x00000800
+#define IDMA_IC_12		0x00001000
+#define IDMA_IC_13		0x00002000
+#define IDMA_SDC_BG		0x00004000
+#define IDMA_SDC_FG		0x00008000
+#define IDMA_SDC_MASK		0x00010000
+#define IDMA_SDC_PARTIAL	0x00020000
+#define IDMA_ADC_SYS1_WR	0x00040000
+#define IDMA_ADC_SYS2_WR	0x00080000
+#define IDMA_ADC_SYS1_CMD	0x00100000
+#define IDMA_ADC_SYS2_CMD	0x00200000
+#define IDMA_ADC_SYS1_RD	0x00400000
+#define IDMA_ADC_SYS2_RD	0x00800000
+#define IDMA_PF_QP		0x01000000
+#define IDMA_PF_BSP		0x02000000
+#define IDMA_PF_Y_IN		0x04000000
+#define IDMA_PF_U_IN		0x08000000
+#define IDMA_PF_V_IN		0x10000000
+#define IDMA_PF_Y_OUT		0x20000000
+#define IDMA_PF_U_OUT		0x40000000
+#define IDMA_PF_V_OUT		0x80000000
+
+#define TSTAT_PF_H264_PAUSE	0x00000001
+#define TSTAT_CSI2MEM_MASK	0x0000000C
+#define TSTAT_CSI2MEM_OFFSET	2
+#define TSTAT_VF_MASK		0x00000600
+#define TSTAT_VF_OFFSET		9
+#define TSTAT_VF_ROT_MASK	0x000C0000
+#define TSTAT_VF_ROT_OFFSET	18
+#define TSTAT_ENC_MASK		0x00000180
+#define TSTAT_ENC_OFFSET	7
+#define TSTAT_ENC_ROT_MASK	0x00030000
+#define TSTAT_ENC_ROT_OFFSET	16
+#define TSTAT_PP_MASK		0x00001800
+#define TSTAT_PP_OFFSET		11
+#define TSTAT_PP_ROT_MASK	0x00300000
+#define TSTAT_PP_ROT_OFFSET	20
+#define TSTAT_PF_MASK		0x00C00000
+#define TSTAT_PF_OFFSET		22
+#define TSTAT_ADCSYS1_MASK	0x03000000
+#define TSTAT_ADCSYS1_OFFSET	24
+#define TSTAT_ADCSYS2_MASK	0x0C000000
+#define TSTAT_ADCSYS2_OFFSET	26
+
+#define TASK_STAT_IDLE		0
+#define TASK_STAT_ACTIVE	1
+#define TASK_STAT_WAIT4READY	2
+
+struct idmac {
+	struct dma_device	dma;
+};
+
+struct ipu {
+	void __iomem		*reg_ipu;
+	void __iomem		*reg_ic;
+	unsigned int		irq_fn;		/* IPU Function IRQ to the CPU */
+	unsigned int		irq_err;	/* IPU Error IRQ to the CPU */
+	unsigned int		irq_base;	/* Beginning of the IPU IRQ range */
+	unsigned long		channel_init_mask;
+	spinlock_t		lock;
+	struct clk		*ipu_clk;
+	struct device		*dev;
+	struct idmac		idmac;
+	struct idmac_channel	channel[IPU_CHANNELS_NUM];
+	struct tasklet_struct	tasklet;
+};
+
+#define to_idmac(d) container_of(d, struct idmac, dma)
+
+extern int ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev);
+extern void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev);
+
+extern bool ipu_irq_status(uint32_t irq);
+extern int ipu_irq_map(unsigned int source);
+extern int ipu_irq_unmap(unsigned int source);
+
+#endif
diff --git a/drivers/dma/ipu/ipu_irq.c b/drivers/dma/ipu/ipu_irq.c
new file mode 100644
index 00000000000..83f532cc767
--- /dev/null
+++ b/drivers/dma/ipu/ipu_irq.c
@@ -0,0 +1,413 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/ipu.h>
+
+#include "ipu_intern.h"
+
+/*
+ * Register read / write - shall be inlined by the compiler
+ */
+static u32 ipu_read_reg(struct ipu *ipu, unsigned long reg)
+{
+	return __raw_readl(ipu->reg_ipu + reg);
+}
+
+static void ipu_write_reg(struct ipu *ipu, u32 value, unsigned long reg)
+{
+	__raw_writel(value, ipu->reg_ipu + reg);
+}
+
+
+/*
+ * IPU IRQ chip driver
+ */
+
+#define IPU_IRQ_NR_FN_BANKS 3
+#define IPU_IRQ_NR_ERR_BANKS 2
+#define IPU_IRQ_NR_BANKS (IPU_IRQ_NR_FN_BANKS + IPU_IRQ_NR_ERR_BANKS)
+
+struct ipu_irq_bank {
+	unsigned int	control;
+	unsigned int	status;
+	spinlock_t	lock;
+	struct ipu	*ipu;
+};
+
+static struct ipu_irq_bank irq_bank[IPU_IRQ_NR_BANKS] = {
+	/* 3 groups of functional interrupts */
+	{
+		.control	= IPU_INT_CTRL_1,
+		.status		= IPU_INT_STAT_1,
+	}, {
+		.control	= IPU_INT_CTRL_2,
+		.status		= IPU_INT_STAT_2,
+	}, {
+		.control	= IPU_INT_CTRL_3,
+		.status		= IPU_INT_STAT_3,
+	},
+	/* 2 groups of error interrupts */
+	{
+		.control	= IPU_INT_CTRL_4,
+		.status		= IPU_INT_STAT_4,
+	}, {
+		.control	= IPU_INT_CTRL_5,
+		.status		= IPU_INT_STAT_5,
+	},
+};
+
+struct ipu_irq_map {
+	unsigned int		irq;
+	int			source;
+	struct ipu_irq_bank	*bank;
+	struct ipu		*ipu;
+};
+
+static struct ipu_irq_map irq_map[CONFIG_MX3_IPU_IRQS];
+/* Protects allocations from the above array of maps */
+static DEFINE_MUTEX(map_lock);
+/* Protects register accesses and individual mappings */
+static DEFINE_SPINLOCK(bank_lock);
+
+static struct ipu_irq_map *src2map(unsigned int src)
+{
+	int i;
+
+	for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++)
+		if (irq_map[i].source == src)
+			return irq_map + i;
+
+	return NULL;
+}
+
+static void ipu_irq_unmask(unsigned int irq)
+{
+	struct ipu_irq_map *map = get_irq_chip_data(irq);
+	struct ipu_irq_bank *bank;
+	uint32_t reg;
+	unsigned long lock_flags;
+
+	spin_lock_irqsave(&bank_lock, lock_flags);
+
+	bank = map->bank;
+	if (!bank) {
+		spin_unlock_irqrestore(&bank_lock, lock_flags);
+		pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
+		return;
+	}
+
+	reg = ipu_read_reg(bank->ipu, bank->control);
+	reg |= (1UL << (map->source & 31));
+	ipu_write_reg(bank->ipu, reg, bank->control);
+
+	spin_unlock_irqrestore(&bank_lock, lock_flags);
+}
+
+static void ipu_irq_mask(unsigned int irq)
+{
+	struct ipu_irq_map *map = get_irq_chip_data(irq);
+	struct ipu_irq_bank *bank;
+	uint32_t reg;
+	unsigned long lock_flags;
+
+	spin_lock_irqsave(&bank_lock, lock_flags);
+
+	bank = map->bank;
+	if (!bank) {
+		spin_unlock_irqrestore(&bank_lock, lock_flags);
+		pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
+		return;
+	}
+
+	reg = ipu_read_reg(bank->ipu, bank->control);
+	reg &= ~(1UL << (map->source & 31));
+	ipu_write_reg(bank->ipu, reg, bank->control);
+
+	spin_unlock_irqrestore(&bank_lock, lock_flags);
+}
+
+static void ipu_irq_ack(unsigned int irq)
+{
+	struct ipu_irq_map *map = get_irq_chip_data(irq);
+	struct ipu_irq_bank *bank;
+	unsigned long lock_flags;
+
+	spin_lock_irqsave(&bank_lock, lock_flags);
+
+	bank = map->bank;
+	if (!bank) {
+		spin_unlock_irqrestore(&bank_lock, lock_flags);
+		pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
+		return;
+	}
+
+	ipu_write_reg(bank->ipu, 1UL << (map->source & 31), bank->status);
+	spin_unlock_irqrestore(&bank_lock, lock_flags);
+}
+
+/**
+ * ipu_irq_status() - returns the current interrupt status of the specified IRQ.
+ * @irq:	interrupt line to get status for.
+ * @return:	true if the interrupt is pending/asserted or false if the
+ *		interrupt is not pending.
+ */
+bool ipu_irq_status(unsigned int irq)
+{
+	struct ipu_irq_map *map = get_irq_chip_data(irq);
+	struct ipu_irq_bank *bank;
+	unsigned long lock_flags;
+	bool ret;
+
+	spin_lock_irqsave(&bank_lock, lock_flags);
+	bank = map->bank;
+	ret = bank && ipu_read_reg(bank->ipu, bank->status) &
+		(1UL << (map->source & 31));
+	spin_unlock_irqrestore(&bank_lock, lock_flags);
+
+	return ret;
+}
+
+/**
+ * ipu_irq_map() - map an IPU interrupt source to an IRQ number
+ * @source:	interrupt source bit position (see below)
+ * @return:	mapped IRQ number or negative error code
+ *
+ * The source parameter has to be explained further. On i.MX31 IPU has 137 IRQ
+ * sources, they are broken down in 5 32-bit registers, like 32, 32, 24, 32, 17.
+ * However, the source argument of this function is not the sequence number of
+ * the possible IRQ, but rather its bit position. So, first interrupt in fourth
+ * register has source number 96, and not 88. This makes calculations easier,
+ * and also provides forward compatibility with any future IPU implementations
+ * with any interrupt bit assignments.
+ */
+int ipu_irq_map(unsigned int source)
+{
+	int i, ret = -ENOMEM;
+	struct ipu_irq_map *map;
+
+	might_sleep();
+
+	mutex_lock(&map_lock);
+	map = src2map(source);
+	if (map) {
+		pr_err("IPU: Source %u already mapped to IRQ %u\n", source, map->irq);
+		ret = -EBUSY;
+		goto out;
+	}
+
+	for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
+		if (irq_map[i].source < 0) {
+			unsigned long lock_flags;
+
+			spin_lock_irqsave(&bank_lock, lock_flags);
+			irq_map[i].source = source;
+			irq_map[i].bank = irq_bank + source / 32;
+			spin_unlock_irqrestore(&bank_lock, lock_flags);
+
+			ret = irq_map[i].irq;
+			pr_debug("IPU: mapped source %u to IRQ %u\n",
+				 source, ret);
+			break;
+		}
+	}
+out:
+	mutex_unlock(&map_lock);
+
+	if (ret < 0)
+		pr_err("IPU: couldn't map source %u: %d\n", source, ret);
+
+	return ret;
+}
+
+/**
+ * ipu_irq_map() - map an IPU interrupt source to an IRQ number
+ * @source:	interrupt source bit position (see ipu_irq_map())
+ * @return:	0 or negative error code
+ */
+int ipu_irq_unmap(unsigned int source)
+{
+	int i, ret = -EINVAL;
+
+	might_sleep();
+
+	mutex_lock(&map_lock);
+	for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
+		if (irq_map[i].source == source) {
+			unsigned long lock_flags;
+
+			pr_debug("IPU: unmapped source %u from IRQ %u\n",
+				 source, irq_map[i].irq);
+
+			spin_lock_irqsave(&bank_lock, lock_flags);
+			irq_map[i].source = -EINVAL;
+			irq_map[i].bank = NULL;
+			spin_unlock_irqrestore(&bank_lock, lock_flags);
+
+			ret = 0;
+			break;
+		}
+	}
+	mutex_unlock(&map_lock);
+
+	return ret;
+}
+
+/* Chained IRQ handler for IPU error interrupt */
+static void ipu_irq_err(unsigned int irq, struct irq_desc *desc)
+{
+	struct ipu *ipu = get_irq_data(irq);
+	u32 status;
+	int i, line;
+
+	for (i = IPU_IRQ_NR_FN_BANKS; i < IPU_IRQ_NR_BANKS; i++) {
+		struct ipu_irq_bank *bank = irq_bank + i;
+
+		spin_lock(&bank_lock);
+		status = ipu_read_reg(ipu, bank->status);
+		/*
+		 * Don't think we have to clear all interrupts here, they will
+		 * be acked by ->handle_irq() (handle_level_irq). However, we
+		 * might want to clear unhandled interrupts after the loop...
+		 */
+		status &= ipu_read_reg(ipu, bank->control);
+		spin_unlock(&bank_lock);
+		while ((line = ffs(status))) {
+			struct ipu_irq_map *map;
+
+			line--;
+			status &= ~(1UL << line);
+
+			spin_lock(&bank_lock);
+			map = src2map(32 * i + line);
+			if (map)
+				irq = map->irq;
+			spin_unlock(&bank_lock);
+
+			if (!map) {
+				pr_err("IPU: Interrupt on unmapped source %u bank %d\n",
+				       line, i);
+				continue;
+			}
+			generic_handle_irq(irq);
+		}
+	}
+}
+
+/* Chained IRQ handler for IPU function interrupt */
+static void ipu_irq_fn(unsigned int irq, struct irq_desc *desc)
+{
+	struct ipu *ipu = get_irq_data(irq);
+	u32 status;
+	int i, line;
+
+	for (i = 0; i < IPU_IRQ_NR_FN_BANKS; i++) {
+		struct ipu_irq_bank *bank = irq_bank + i;
+
+		spin_lock(&bank_lock);
+		status = ipu_read_reg(ipu, bank->status);
+		/* Not clearing all interrupts, see above */
+		status &= ipu_read_reg(ipu, bank->control);
+		spin_unlock(&bank_lock);
+		while ((line = ffs(status))) {
+			struct ipu_irq_map *map;
+
+			line--;
+			status &= ~(1UL << line);
+
+			spin_lock(&bank_lock);
+			map = src2map(32 * i + line);
+			if (map)
+				irq = map->irq;
+			spin_unlock(&bank_lock);
+
+			if (!map) {
+				pr_err("IPU: Interrupt on unmapped source %u bank %d\n",
+				       line, i);
+				continue;
+			}
+			generic_handle_irq(irq);
+		}
+	}
+}
+
+static struct irq_chip ipu_irq_chip = {
+	.name	= "ipu_irq",
+	.ack	= ipu_irq_ack,
+	.mask	= ipu_irq_mask,
+	.unmask	= ipu_irq_unmask,
+};
+
+/* Install the IRQ handler */
+int ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev)
+{
+	struct ipu_platform_data *pdata = dev->dev.platform_data;
+	unsigned int irq, irq_base, i;
+
+	irq_base = pdata->irq_base;
+
+	for (i = 0; i < IPU_IRQ_NR_BANKS; i++)
+		irq_bank[i].ipu = ipu;
+
+	for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
+		int ret;
+
+		irq = irq_base + i;
+		ret = set_irq_chip(irq, &ipu_irq_chip);
+		if (ret < 0)
+			return ret;
+		ret = set_irq_chip_data(irq, irq_map + i);
+		if (ret < 0)
+			return ret;
+		irq_map[i].ipu = ipu;
+		irq_map[i].irq = irq;
+		irq_map[i].source = -EINVAL;
+		set_irq_handler(irq, handle_level_irq);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+#endif
+	}
+
+	set_irq_data(ipu->irq_fn, ipu);
+	set_irq_chained_handler(ipu->irq_fn, ipu_irq_fn);
+
+	set_irq_data(ipu->irq_err, ipu);
+	set_irq_chained_handler(ipu->irq_err, ipu_irq_err);
+
+	return 0;
+}
+
+void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev)
+{
+	struct ipu_platform_data *pdata = dev->dev.platform_data;
+	unsigned int irq, irq_base;
+
+	irq_base = pdata->irq_base;
+
+	set_irq_chained_handler(ipu->irq_fn, NULL);
+	set_irq_data(ipu->irq_fn, NULL);
+
+	set_irq_chained_handler(ipu->irq_err, NULL);
+	set_irq_data(ipu->irq_err, NULL);
+
+	for (irq = irq_base; irq < irq_base + CONFIG_MX3_IPU_IRQS; irq++) {
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, 0);
+#endif
+		set_irq_chip(irq, NULL);
+		set_irq_chip_data(irq, NULL);
+	}
+}
diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c
index cd2e3b8087e..24f3ca85152 100644
--- a/drivers/edac/cell_edac.c
+++ b/drivers/edac/cell_edac.c
@@ -36,7 +36,7 @@ static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar)
 	struct csrow_info		*csrow = &mci->csrows[0];
 	unsigned long			address, pfn, offset, syndrome;
 
-	dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016lx\n",
+	dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016llx\n",
 		priv->node, chan, ar);
 
 	/* Address decoding is likely a bit bogus, to dbl check */
@@ -58,7 +58,7 @@ static void cell_edac_count_ue(struct mem_ctl_info *mci, int chan, u64 ar)
 	struct csrow_info		*csrow = &mci->csrows[0];
 	unsigned long			address, pfn, offset;
 
-	dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016lx\n",
+	dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016llx\n",
 		priv->node, chan, ar);
 
 	/* Address decoding is likely a bit bogus, to dbl check */
@@ -169,7 +169,7 @@ static int __devinit cell_edac_probe(struct platform_device *pdev)
 
 	/* Get channel population */
 	reg = in_be64(&regs->mic_mnt_cfg);
-	dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016lx\n", reg);
+	dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016llx\n", reg);
 	chanmask = 0;
 	if (reg & CBE_MIC_MNT_CFG_CHAN_0_POP)
 		chanmask |= 0x1;
@@ -180,7 +180,7 @@ static int __devinit cell_edac_probe(struct platform_device *pdev)
 			 "Yuck ! No channel populated ? Aborting !\n");
 		return -ENODEV;
 	}
-	dev_dbg(&pdev->dev, "Initial FIR = 0x%016lx\n",
+	dev_dbg(&pdev->dev, "Initial FIR = 0x%016llx\n",
 		in_be64(&regs->mic_fir));
 
 	/* Allocate & init EDAC MC data structure */
diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c
index 6bd91a15d5e..a5dd7a665aa 100644
--- a/drivers/firewire/fw-card.c
+++ b/drivers/firewire/fw-card.c
@@ -232,7 +232,7 @@ fw_card_bm_work(struct work_struct *work)
 	root_id = root_node->node_id;
 	grace = time_after(jiffies, card->reset_jiffies + DIV_ROUND_UP(HZ, 10));
 
-	if (card->bm_generation + 1 == generation ||
+	if (is_next_generation(generation, card->bm_generation) ||
 	    (card->bm_generation != generation && grace)) {
 		/*
 		 * This first step is to figure out who is IRM and
@@ -412,6 +412,7 @@ fw_card_add(struct fw_card *card,
 {
 	u32 *config_rom;
 	size_t length;
+	int err;
 
 	card->max_receive = max_receive;
 	card->link_speed = link_speed;
@@ -422,7 +423,13 @@ fw_card_add(struct fw_card *card,
 	list_add_tail(&card->link, &card_list);
 	mutex_unlock(&card_mutex);
 
-	return card->driver->enable(card, config_rom, length);
+	err = card->driver->enable(card, config_rom, length);
+	if (err < 0) {
+		mutex_lock(&card_mutex);
+		list_del(&card->link);
+		mutex_unlock(&card_mutex);
+	}
+	return err;
 }
 EXPORT_SYMBOL(fw_card_add);
 
@@ -512,7 +519,7 @@ fw_core_remove_card(struct fw_card *card)
 	fw_core_initiate_bus_reset(card, 1);
 
 	mutex_lock(&card_mutex);
-	list_del(&card->link);
+	list_del_init(&card->link);
 	mutex_unlock(&card_mutex);
 
 	/* Set up the dummy driver. */
diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c
index 2af5a8d1e01..bf53acb4565 100644
--- a/drivers/firewire/fw-device.c
+++ b/drivers/firewire/fw-device.c
@@ -25,6 +25,7 @@
 #include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/idr.h>
+#include <linux/jiffies.h>
 #include <linux/string.h>
 #include <linux/rwsem.h>
 #include <linux/semaphore.h>
@@ -634,12 +635,39 @@ struct fw_device *fw_device_get_by_devt(dev_t devt)
 	return device;
 }
 
+/*
+ * These defines control the retry behavior for reading the config
+ * rom.  It shouldn't be necessary to tweak these; if the device
+ * doesn't respond to a config rom read within 10 seconds, it's not
+ * going to respond at all.  As for the initial delay, a lot of
+ * devices will be able to respond within half a second after bus
+ * reset.  On the other hand, it's not really worth being more
+ * aggressive than that, since it scales pretty well; if 10 devices
+ * are plugged in, they're all getting read within one second.
+ */
+
+#define MAX_RETRIES	10
+#define RETRY_DELAY	(3 * HZ)
+#define INITIAL_DELAY	(HZ / 2)
+#define SHUTDOWN_DELAY	(2 * HZ)
+
 static void fw_device_shutdown(struct work_struct *work)
 {
 	struct fw_device *device =
 		container_of(work, struct fw_device, work.work);
 	int minor = MINOR(device->device.devt);
 
+	if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY)
+	    && !list_empty(&device->card->link)) {
+		schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
+		return;
+	}
+
+	if (atomic_cmpxchg(&device->state,
+			   FW_DEVICE_GONE,
+			   FW_DEVICE_SHUTDOWN) != FW_DEVICE_GONE)
+		return;
+
 	fw_device_cdev_remove(device);
 	device_for_each_child(&device->device, NULL, shutdown_unit);
 	device_unregister(&device->device);
@@ -647,6 +675,7 @@ static void fw_device_shutdown(struct work_struct *work)
 	down_write(&fw_device_rwsem);
 	idr_remove(&fw_device_idr, minor);
 	up_write(&fw_device_rwsem);
+
 	fw_device_put(device);
 }
 
@@ -654,25 +683,63 @@ static struct device_type fw_device_type = {
 	.release	= fw_device_release,
 };
 
+static void fw_device_update(struct work_struct *work);
+
 /*
- * These defines control the retry behavior for reading the config
- * rom.  It shouldn't be necessary to tweak these; if the device
- * doesn't respond to a config rom read within 10 seconds, it's not
- * going to respond at all.  As for the initial delay, a lot of
- * devices will be able to respond within half a second after bus
- * reset.  On the other hand, it's not really worth being more
- * aggressive than that, since it scales pretty well; if 10 devices
- * are plugged in, they're all getting read within one second.
+ * If a device was pending for deletion because its node went away but its
+ * bus info block and root directory header matches that of a newly discovered
+ * device, revive the existing fw_device.
+ * The newly allocated fw_device becomes obsolete instead.
  */
+static int lookup_existing_device(struct device *dev, void *data)
+{
+	struct fw_device *old = fw_device(dev);
+	struct fw_device *new = data;
+	struct fw_card *card = new->card;
+	int match = 0;
+
+	down_read(&fw_device_rwsem); /* serialize config_rom access */
+	spin_lock_irq(&card->lock);  /* serialize node access */
+
+	if (memcmp(old->config_rom, new->config_rom, 6 * 4) == 0 &&
+	    atomic_cmpxchg(&old->state,
+			   FW_DEVICE_GONE,
+			   FW_DEVICE_RUNNING) == FW_DEVICE_GONE) {
+		struct fw_node *current_node = new->node;
+		struct fw_node *obsolete_node = old->node;
+
+		new->node = obsolete_node;
+		new->node->data = new;
+		old->node = current_node;
+		old->node->data = old;
+
+		old->max_speed = new->max_speed;
+		old->node_id = current_node->node_id;
+		smp_wmb();  /* update node_id before generation */
+		old->generation = card->generation;
+		old->config_rom_retries = 0;
+		fw_notify("rediscovered device %s\n", dev_name(dev));
 
-#define MAX_RETRIES	10
-#define RETRY_DELAY	(3 * HZ)
-#define INITIAL_DELAY	(HZ / 2)
+		PREPARE_DELAYED_WORK(&old->work, fw_device_update);
+		schedule_delayed_work(&old->work, 0);
+
+		if (current_node == card->root_node)
+			fw_schedule_bm_work(card, 0);
+
+		match = 1;
+	}
+
+	spin_unlock_irq(&card->lock);
+	up_read(&fw_device_rwsem);
+
+	return match;
+}
 
 static void fw_device_init(struct work_struct *work)
 {
 	struct fw_device *device =
 		container_of(work, struct fw_device, work.work);
+	struct device *revived_dev;
 	int minor, err;
 
 	/*
@@ -696,6 +763,15 @@ static void fw_device_init(struct work_struct *work)
 		return;
 	}
 
+	revived_dev = device_find_child(device->card->device,
+					device, lookup_existing_device);
+	if (revived_dev) {
+		put_device(revived_dev);
+		fw_device_release(&device->device);
+
+		return;
+	}
+
 	device_initialize(&device->device);
 
 	fw_device_get(device);
@@ -734,9 +810,10 @@ static void fw_device_init(struct work_struct *work)
 	 * fw_node_event().
 	 */
 	if (atomic_cmpxchg(&device->state,
-		    FW_DEVICE_INITIALIZING,
-		    FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) {
-		fw_device_shutdown(work);
+			   FW_DEVICE_INITIALIZING,
+			   FW_DEVICE_RUNNING) == FW_DEVICE_GONE) {
+		PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+		schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
 	} else {
 		if (device->config_rom_retries)
 			fw_notify("created device %s: GUID %08x%08x, S%d00, "
@@ -847,8 +924,8 @@ static void fw_device_refresh(struct work_struct *work)
 
 	case REREAD_BIB_UNCHANGED:
 		if (atomic_cmpxchg(&device->state,
-			    FW_DEVICE_INITIALIZING,
-			    FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
+				   FW_DEVICE_INITIALIZING,
+				   FW_DEVICE_RUNNING) == FW_DEVICE_GONE)
 			goto gone;
 
 		fw_device_update(work);
@@ -879,8 +956,8 @@ static void fw_device_refresh(struct work_struct *work)
 	create_units(device);
 
 	if (atomic_cmpxchg(&device->state,
-		    FW_DEVICE_INITIALIZING,
-		    FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
+			   FW_DEVICE_INITIALIZING,
+			   FW_DEVICE_RUNNING) == FW_DEVICE_GONE)
 		goto gone;
 
 	fw_notify("refreshed device %s\n", dev_name(&device->device));
@@ -890,8 +967,9 @@ static void fw_device_refresh(struct work_struct *work)
  give_up:
 	fw_notify("giving up on refresh of device %s\n", dev_name(&device->device));
  gone:
-	atomic_set(&device->state, FW_DEVICE_SHUTDOWN);
-	fw_device_shutdown(work);
+	atomic_set(&device->state, FW_DEVICE_GONE);
+	PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+	schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
  out:
 	if (node_id == card->root_node->node_id)
 		fw_schedule_bm_work(card, 0);
@@ -995,9 +1073,10 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
 		 */
 		device = node->data;
 		if (atomic_xchg(&device->state,
-				FW_DEVICE_SHUTDOWN) == FW_DEVICE_RUNNING) {
+				FW_DEVICE_GONE) == FW_DEVICE_RUNNING) {
 			PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
-			schedule_delayed_work(&device->work, 0);
+			schedule_delayed_work(&device->work,
+				list_empty(&card->link) ? 0 : SHUTDOWN_DELAY);
 		}
 		break;
 	}
diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h
index df51732608d..8ef6ec2ca21 100644
--- a/drivers/firewire/fw-device.h
+++ b/drivers/firewire/fw-device.h
@@ -28,6 +28,7 @@
 enum fw_device_state {
 	FW_DEVICE_INITIALIZING,
 	FW_DEVICE_RUNNING,
+	FW_DEVICE_GONE,
 	FW_DEVICE_SHUTDOWN,
 };
 
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index ab9c01e462e..6d19828a93a 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -226,7 +226,7 @@ static inline struct fw_ohci *fw_ohci(struct fw_card *card)
 #define CONTEXT_DEAD	0x0800
 #define CONTEXT_ACTIVE	0x0400
 
-#define OHCI1394_MAX_AT_REQ_RETRIES	0x2
+#define OHCI1394_MAX_AT_REQ_RETRIES	0xf
 #define OHCI1394_MAX_AT_RESP_RETRIES	0x2
 #define OHCI1394_MAX_PHYS_RESP_RETRIES	0x8
 
@@ -896,11 +896,11 @@ static void context_stop(struct context *ctx)
 	for (i = 0; i < 10; i++) {
 		reg = reg_read(ctx->ohci, CONTROL_SET(ctx->regs));
 		if ((reg & CONTEXT_ACTIVE) == 0)
-			break;
+			return;
 
-		fw_notify("context_stop: still active (0x%08x)\n", reg);
 		mdelay(1);
 	}
+	fw_error("Error: DMA context still active (0x%08x)\n", reg);
 }
 
 struct driver_data {
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index e88d5067448..c71c4419d9e 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -168,6 +168,7 @@ struct sbp2_target {
 	int address_high;
 	unsigned int workarounds;
 	unsigned int mgt_orb_timeout;
+	unsigned int max_payload;
 
 	int dont_block;	/* counter for each logical unit */
 	int blocked;	/* ditto */
@@ -310,14 +311,16 @@ struct sbp2_command_orb {
 	dma_addr_t page_table_bus;
 };
 
+#define SBP2_ROM_VALUE_WILDCARD ~0         /* match all */
+#define SBP2_ROM_VALUE_MISSING  0xff000000 /* not present in the unit dir. */
+
 /*
  * List of devices with known bugs.
  *
  * The firmware_revision field, masked with 0xffff00, is the best
  * indicator for the type of bridge chip of a device.  It yields a few
  * false positives but this did not break correctly behaving devices
- * so far.  We use ~0 as a wildcard, since the 24 bit values we get
- * from the config rom can never match that.
+ * so far.
  */
 static const struct {
 	u32 firmware_revision;
@@ -339,33 +342,35 @@ static const struct {
 	},
 	/* Initio bridges, actually only needed for some older ones */ {
 		.firmware_revision	= 0x000200,
-		.model			= ~0,
+		.model			= SBP2_ROM_VALUE_WILDCARD,
 		.workarounds		= SBP2_WORKAROUND_INQUIRY_36,
 	},
 	/* PL-3507 bridge with Prolific firmware */ {
 		.firmware_revision	= 0x012800,
-		.model			= ~0,
+		.model			= SBP2_ROM_VALUE_WILDCARD,
 		.workarounds		= SBP2_WORKAROUND_POWER_CONDITION,
 	},
 	/* Symbios bridge */ {
 		.firmware_revision	= 0xa0b800,
-		.model			= ~0,
+		.model			= SBP2_ROM_VALUE_WILDCARD,
 		.workarounds		= SBP2_WORKAROUND_128K_MAX_TRANS,
 	},
 	/* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ {
 		.firmware_revision	= 0x002600,
-		.model			= ~0,
+		.model			= SBP2_ROM_VALUE_WILDCARD,
 		.workarounds		= SBP2_WORKAROUND_128K_MAX_TRANS,
 	},
-
 	/*
-	 * There are iPods (2nd gen, 3rd gen) with model_id == 0, but
-	 * these iPods do not feature the read_capacity bug according
-	 * to one report.  Read_capacity behaviour as well as model_id
-	 * could change due to Apple-supplied firmware updates though.
+	 * iPod 2nd generation: needs 128k max transfer size workaround
+	 * iPod 3rd generation: needs fix capacity workaround
 	 */
-
-	/* iPod 4th generation. */ {
+	{
+		.firmware_revision	= 0x0a2700,
+		.model			= 0x000000,
+		.workarounds		= SBP2_WORKAROUND_128K_MAX_TRANS |
+					  SBP2_WORKAROUND_FIX_CAPACITY,
+	},
+	/* iPod 4th generation */ {
 		.firmware_revision	= 0x0a2700,
 		.model			= 0x000021,
 		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
@@ -1092,7 +1097,7 @@ static void sbp2_init_workarounds(struct sbp2_target *tgt, u32 model,
 			continue;
 
 		if (sbp2_workarounds_table[i].model != model &&
-		    sbp2_workarounds_table[i].model != ~0)
+		    sbp2_workarounds_table[i].model != SBP2_ROM_VALUE_WILDCARD)
 			continue;
 
 		w |= sbp2_workarounds_table[i].workarounds;
@@ -1142,20 +1147,28 @@ static int sbp2_probe(struct device *dev)
 	fw_device_get(device);
 	fw_unit_get(unit);
 
-	/* Initialize to values that won't match anything in our table. */
-	firmware_revision = 0xff000000;
-	model = 0xff000000;
-
 	/* implicit directory ID */
 	tgt->directory_id = ((unit->directory - device->config_rom) * 4
 			     + CSR_CONFIG_ROM) & 0xffffff;
 
+	firmware_revision = SBP2_ROM_VALUE_MISSING;
+	model		  = SBP2_ROM_VALUE_MISSING;
+
 	if (sbp2_scan_unit_dir(tgt, unit->directory, &model,
 			       &firmware_revision) < 0)
 		goto fail_tgt_put;
 
 	sbp2_init_workarounds(tgt, model, firmware_revision);
 
+	/*
+	 * At S100 we can do 512 bytes per packet, at S200 1024 bytes,
+	 * and so on up to 4096 bytes.  The SBP-2 max_payload field
+	 * specifies the max payload size as 2 ^ (max_payload + 2), so
+	 * if we set this to max_speed + 7, we get the right value.
+	 */
+	tgt->max_payload = min(device->max_speed + 7, 10U);
+	tgt->max_payload = min(tgt->max_payload, device->card->max_receive - 1);
+
 	/* Do the login in a workqueue so we can easily reschedule retries. */
 	list_for_each_entry(lu, &tgt->lu_list, link)
 		sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
@@ -1273,6 +1286,19 @@ static struct fw_driver sbp2_driver = {
 	.id_table = sbp2_id_table,
 };
 
+static void sbp2_unmap_scatterlist(struct device *card_device,
+				   struct sbp2_command_orb *orb)
+{
+	if (scsi_sg_count(orb->cmd))
+		dma_unmap_sg(card_device, scsi_sglist(orb->cmd),
+			     scsi_sg_count(orb->cmd),
+			     orb->cmd->sc_data_direction);
+
+	if (orb->request.misc & cpu_to_be32(COMMAND_ORB_PAGE_TABLE_PRESENT))
+		dma_unmap_single(card_device, orb->page_table_bus,
+				 sizeof(orb->page_table), DMA_TO_DEVICE);
+}
+
 static unsigned int
 sbp2_status_to_sense_data(u8 *sbp2_status, u8 *sense_data)
 {
@@ -1352,15 +1378,7 @@ complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status)
 
 	dma_unmap_single(device->card->device, orb->base.request_bus,
 			 sizeof(orb->request), DMA_TO_DEVICE);
-
-	if (scsi_sg_count(orb->cmd) > 0)
-		dma_unmap_sg(device->card->device, scsi_sglist(orb->cmd),
-			     scsi_sg_count(orb->cmd),
-			     orb->cmd->sc_data_direction);
-
-	if (orb->page_table_bus != 0)
-		dma_unmap_single(device->card->device, orb->page_table_bus,
-				 sizeof(orb->page_table), DMA_TO_DEVICE);
+	sbp2_unmap_scatterlist(device->card->device, orb);
 
 	orb->cmd->result = result;
 	orb->done(orb->cmd);
@@ -1434,7 +1452,6 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
 	struct sbp2_logical_unit *lu = cmd->device->hostdata;
 	struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
 	struct sbp2_command_orb *orb;
-	unsigned int max_payload;
 	int generation, retval = SCSI_MLQUEUE_HOST_BUSY;
 
 	/*
@@ -1462,17 +1479,9 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
 	orb->done = done;
 	orb->cmd  = cmd;
 
-	orb->request.next.high   = cpu_to_be32(SBP2_ORB_NULL);
-	/*
-	 * At speed 100 we can do 512 bytes per packet, at speed 200,
-	 * 1024 bytes per packet etc.  The SBP-2 max_payload field
-	 * specifies the max payload size as 2 ^ (max_payload + 2), so
-	 * if we set this to max_speed + 7, we get the right value.
-	 */
-	max_payload = min(device->max_speed + 7,
-			  device->card->max_receive - 1);
+	orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL);
 	orb->request.misc = cpu_to_be32(
-		COMMAND_ORB_MAX_PAYLOAD(max_payload) |
+		COMMAND_ORB_MAX_PAYLOAD(lu->tgt->max_payload) |
 		COMMAND_ORB_SPEED(device->max_speed) |
 		COMMAND_ORB_NOTIFY);
 
@@ -1491,8 +1500,10 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
 	orb->base.request_bus =
 		dma_map_single(device->card->device, &orb->request,
 			       sizeof(orb->request), DMA_TO_DEVICE);
-	if (dma_mapping_error(device->card->device, orb->base.request_bus))
+	if (dma_mapping_error(device->card->device, orb->base.request_bus)) {
+		sbp2_unmap_scatterlist(device->card->device, orb);
 		goto out;
+	}
 
 	sbp2_send_orb(&orb->base, lu, lu->tgt->node_id, generation,
 		      lu->command_block_agent_address + SBP2_ORB_POINTER);
diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c
index c9be6e6948c..8dd6703b55c 100644
--- a/drivers/firewire/fw-topology.c
+++ b/drivers/firewire/fw-topology.c
@@ -518,6 +518,18 @@ fw_core_handle_bus_reset(struct fw_card *card,
 	struct fw_node *local_node;
 	unsigned long flags;
 
+	/*
+	 * If the selfID buffer is not the immediate successor of the
+	 * previously processed one, we cannot reliably compare the
+	 * old and new topologies.
+	 */
+	if (!is_next_generation(generation, card->generation) &&
+	    card->local_node != NULL) {
+		fw_notify("skipped bus generations, destroying all nodes\n");
+		fw_destroy_nodes(card);
+		card->bm_retries = 0;
+	}
+
 	spin_lock_irqsave(&card->lock, flags);
 
 	card->node_id = node_id;
diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h
index c9ab12a15f6..1d78e9cc594 100644
--- a/drivers/firewire/fw-transaction.h
+++ b/drivers/firewire/fw-transaction.h
@@ -276,6 +276,15 @@ static inline void fw_card_put(struct fw_card *card)
 extern void fw_schedule_bm_work(struct fw_card *card, unsigned long delay);
 
 /*
+ * Check whether new_generation is the immediate successor of old_generation.
+ * Take counter roll-over at 255 (as per to OHCI) into account.
+ */
+static inline bool is_next_generation(int new_generation, int old_generation)
+{
+	return (new_generation & 0xff) == ((old_generation + 1) & 0xff);
+}
+
+/*
  * The iso packet format allows for an immediate header/payload part
  * stored in 'header' immediately after the packet info plus an
  * indirect payload part that is pointer to by the 'payload' field.
diff --git a/drivers/firmware/dell_rbu.c b/drivers/firmware/dell_rbu.c
index 13946ebd77d..b4704e150b2 100644
--- a/drivers/firmware/dell_rbu.c
+++ b/drivers/firmware/dell_rbu.c
@@ -576,7 +576,7 @@ static ssize_t read_rbu_image_type(struct kobject *kobj,
 {
 	int size = 0;
 	if (!pos)
-		size = sprintf(buffer, "%s\n", image_type);
+		size = scnprintf(buffer, count, "%s\n", image_type);
 	return size;
 }
 
@@ -648,7 +648,7 @@ static ssize_t read_rbu_packet_size(struct kobject *kobj,
 	int size = 0;
 	if (!pos) {
 		spin_lock(&rbu_data.lock);
-		size = sprintf(buffer, "%lu\n", rbu_data.packetsize);
+		size = scnprintf(buffer, count, "%lu\n", rbu_data.packetsize);
 		spin_unlock(&rbu_data.lock);
 	}
 	return size;
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index d76adfea5df..8f0f7c44930 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -415,6 +415,29 @@ void __init dmi_scan_machine(void)
 }
 
 /**
+ *	dmi_matches - check if dmi_system_id structure matches system DMI data
+ *	@dmi: pointer to the dmi_system_id structure to check
+ */
+static bool dmi_matches(const struct dmi_system_id *dmi)
+{
+	int i;
+
+	WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n");
+
+	for (i = 0; i < ARRAY_SIZE(dmi->matches); i++) {
+		int s = dmi->matches[i].slot;
+		if (s == DMI_NONE)
+			continue;
+		if (dmi_ident[s]
+		    && strstr(dmi_ident[s], dmi->matches[i].substr))
+			continue;
+		/* No match */
+		return false;
+	}
+	return true;
+}
+
+/**
  *	dmi_check_system - check system DMI data
  *	@list: array of dmi_system_id structures to match against
  *		All non-null elements of the list must match
@@ -429,32 +452,45 @@ void __init dmi_scan_machine(void)
  */
 int dmi_check_system(const struct dmi_system_id *list)
 {
-	int i, count = 0;
-	const struct dmi_system_id *d = list;
-
-	WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n");
-
-	while (d->ident) {
-		for (i = 0; i < ARRAY_SIZE(d->matches); i++) {
-			int s = d->matches[i].slot;
-			if (s == DMI_NONE)
-				continue;
-			if (dmi_ident[s] && strstr(dmi_ident[s], d->matches[i].substr))
-				continue;
-			/* No match */
-			goto fail;
+	int count = 0;
+	const struct dmi_system_id *d;
+
+	for (d = list; d->ident; d++)
+		if (dmi_matches(d)) {
+			count++;
+			if (d->callback && d->callback(d))
+				break;
 		}
-		count++;
-		if (d->callback && d->callback(d))
-			break;
-fail:		d++;
-	}
 
 	return count;
 }
 EXPORT_SYMBOL(dmi_check_system);
 
 /**
+ *	dmi_first_match - find dmi_system_id structure matching system DMI data
+ *	@list: array of dmi_system_id structures to match against
+ *		All non-null elements of the list must match
+ *		their slot's (field index's) data (i.e., each
+ *		list string must be a substring of the specified
+ *		DMI slot's string data) to be considered a
+ *		successful match.
+ *
+ *	Walk the blacklist table until the first match is found.  Return the
+ *	pointer to the matching entry or NULL if there's no match.
+ */
+const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list)
+{
+	const struct dmi_system_id *d;
+
+	for (d = list; d->ident; d++)
+		if (dmi_matches(d))
+			return d;
+
+	return NULL;
+}
+EXPORT_SYMBOL(dmi_first_match);
+
+/**
  *	dmi_get_system_info - return DMI data value
  *	@field: data index (see enum dmi_field)
  *
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 35e7aea4222..42fb2fd24c0 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -789,6 +789,7 @@ int gpio_request(unsigned gpio, const char *label)
 	} else {
 		status = -EBUSY;
 		module_put(chip->owner);
+		goto done;
 	}
 
 	if (chip->request) {
diff --git a/drivers/gpu/drm/drm_agpsupport.c b/drivers/gpu/drm/drm_agpsupport.c
index 3d33b8252b5..14796594e5d 100644
--- a/drivers/gpu/drm/drm_agpsupport.c
+++ b/drivers/gpu/drm/drm_agpsupport.c
@@ -33,10 +33,11 @@
 
 #include "drmP.h"
 #include <linux/module.h>
-#include <asm/agp.h>
 
 #if __OS_HAS_AGP
 
+#include <asm/agp.h>
+
 /**
  * Get AGP information.
  *
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 5b2cbb77816..bfce0992fef 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -194,7 +194,6 @@ char *drm_get_connector_status_name(enum drm_connector_status status)
  * @type: object type
  *
  * LOCKING:
- * Caller must hold DRM mode_config lock.
  *
  * Create a unique identifier based on @ptr in @dev's identifier space.  Used
  * for tracking modes, CRTCs and connectors.
@@ -209,15 +208,15 @@ static int drm_mode_object_get(struct drm_device *dev,
 	int new_id = 0;
 	int ret;
 
-	WARN(!mutex_is_locked(&dev->mode_config.mutex),
-	     "%s called w/o mode_config lock\n", __func__);
 again:
 	if (idr_pre_get(&dev->mode_config.crtc_idr, GFP_KERNEL) == 0) {
 		DRM_ERROR("Ran out memory getting a mode number\n");
 		return -EINVAL;
 	}
 
+	mutex_lock(&dev->mode_config.idr_mutex);
 	ret = idr_get_new_above(&dev->mode_config.crtc_idr, obj, 1, &new_id);
+	mutex_unlock(&dev->mode_config.idr_mutex);
 	if (ret == -EAGAIN)
 		goto again;
 
@@ -239,16 +238,20 @@ again:
 static void drm_mode_object_put(struct drm_device *dev,
 				struct drm_mode_object *object)
 {
+	mutex_lock(&dev->mode_config.idr_mutex);
 	idr_remove(&dev->mode_config.crtc_idr, object->id);
+	mutex_unlock(&dev->mode_config.idr_mutex);
 }
 
 void *drm_mode_object_find(struct drm_device *dev, uint32_t id, uint32_t type)
 {
-	struct drm_mode_object *obj;
+	struct drm_mode_object *obj = NULL;
 
+	mutex_lock(&dev->mode_config.idr_mutex);
 	obj = idr_find(&dev->mode_config.crtc_idr, id);
 	if (!obj || (obj->type != type) || (obj->id != id))
-		return NULL;
+		obj = NULL;
+	mutex_unlock(&dev->mode_config.idr_mutex);
 
 	return obj;
 }
@@ -786,6 +789,7 @@ EXPORT_SYMBOL(drm_mode_create_dithering_property);
 void drm_mode_config_init(struct drm_device *dev)
 {
 	mutex_init(&dev->mode_config.mutex);
+	mutex_init(&dev->mode_config.idr_mutex);
 	INIT_LIST_HEAD(&dev->mode_config.fb_list);
 	INIT_LIST_HEAD(&dev->mode_config.fb_kernel_list);
 	INIT_LIST_HEAD(&dev->mode_config.crtc_list);
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 5ff88d95222..14c7a23dc15 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -294,6 +294,7 @@ EXPORT_SYMBOL(drm_init);
  */
 static void drm_cleanup(struct drm_device * dev)
 {
+	struct drm_map_list *r_list, *list_temp;
 	DRM_DEBUG("\n");
 
 	if (!dev) {
@@ -325,6 +326,9 @@ static void drm_cleanup(struct drm_device * dev)
 	drm_ht_remove(&dev->map_hash);
 	drm_ctxbitmap_cleanup(dev);
 
+	list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head)
+		drm_rmmap(dev, r_list->map);
+
 	if (drm_core_check_feature(dev, DRIVER_MODESET))
 		drm_put_minor(&dev->control);
 
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 0fbb0da342c..5a4d3244758 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -660,7 +660,7 @@ struct edid *drm_get_edid(struct drm_connector *connector,
 
 	edid = (struct edid *)drm_ddc_read(adapter);
 	if (!edid) {
-		dev_warn(&connector->dev->pdev->dev, "%s: no EDID data\n",
+		dev_info(&connector->dev->pdev->dev, "%s: no EDID data\n",
 			 drm_get_connector_name(connector));
 		return NULL;
 	}
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 9da58145287..6915fb82d0b 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -136,7 +136,7 @@ drm_gem_object_alloc(struct drm_device *dev, size_t size)
 	obj = kcalloc(1, sizeof(*obj), GFP_KERNEL);
 
 	obj->dev = dev;
-	obj->filp = shmem_file_setup("drm mm object", size, 0);
+	obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE);
 	if (IS_ERR(obj->filp)) {
 		kfree(obj);
 		return NULL;
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 477caa1b1e4..69aa0ab2840 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -106,8 +106,6 @@ void drm_vblank_cleanup(struct drm_device *dev)
 
 	drm_free(dev->vbl_queue, sizeof(*dev->vbl_queue) * dev->num_crtcs,
 		 DRM_MEM_DRIVER);
-	drm_free(dev->vbl_sigs, sizeof(*dev->vbl_sigs) * dev->num_crtcs,
-		 DRM_MEM_DRIVER);
 	drm_free(dev->_vblank_count, sizeof(*dev->_vblank_count) *
 		 dev->num_crtcs, DRM_MEM_DRIVER);
 	drm_free(dev->vblank_refcount, sizeof(*dev->vblank_refcount) *
@@ -132,7 +130,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs)
 	setup_timer(&dev->vblank_disable_timer, vblank_disable_fn,
 		    (unsigned long)dev);
 	spin_lock_init(&dev->vbl_lock);
-	atomic_set(&dev->vbl_signal_pending, 0);
 	dev->num_crtcs = num_crtcs;
 
 	dev->vbl_queue = drm_alloc(sizeof(wait_queue_head_t) * num_crtcs,
@@ -140,11 +137,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs)
 	if (!dev->vbl_queue)
 		goto err;
 
-	dev->vbl_sigs = drm_alloc(sizeof(struct list_head) * num_crtcs,
-				  DRM_MEM_DRIVER);
-	if (!dev->vbl_sigs)
-		goto err;
-
 	dev->_vblank_count = drm_alloc(sizeof(atomic_t) * num_crtcs,
 				      DRM_MEM_DRIVER);
 	if (!dev->_vblank_count)
@@ -177,7 +169,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs)
 	/* Zero per-crtc vblank stuff */
 	for (i = 0; i < num_crtcs; i++) {
 		init_waitqueue_head(&dev->vbl_queue[i]);
-		INIT_LIST_HEAD(&dev->vbl_sigs[i]);
 		atomic_set(&dev->_vblank_count[i], 0);
 		atomic_set(&dev->vblank_refcount[i], 0);
 	}
@@ -540,15 +531,10 @@ out:
  * \param data user argument, pointing to a drm_wait_vblank structure.
  * \return zero on success or a negative number on failure.
  *
- * Verifies the IRQ is installed.
- *
- * If a signal is requested checks if this task has already scheduled the same signal
- * for the same vblank sequence number - nothing to be done in
- * that case. If the number of tasks waiting for the interrupt exceeds 100 the
- * function fails. Otherwise adds a new entry to drm_device::vbl_sigs for this
- * task.
- *
- * If a signal is not requested, then calls vblank_wait().
+ * This function enables the vblank interrupt on the pipe requested, then
+ * sleeps waiting for the requested sequence number to occur, and drops
+ * the vblank interrupt refcount afterwards. (vblank irq disable follows that
+ * after a timeout with no further vblank waits scheduled).
  */
 int drm_wait_vblank(struct drm_device *dev, void *data,
 		    struct drm_file *file_priv)
@@ -560,6 +546,9 @@ int drm_wait_vblank(struct drm_device *dev, void *data,
 	if ((!dev->pdev->irq) || (!dev->irq_enabled))
 		return -EINVAL;
 
+	if (vblwait->request.type & _DRM_VBLANK_SIGNAL)
+		return -EINVAL;
+
 	if (vblwait->request.type &
 	    ~(_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK)) {
 		DRM_ERROR("Unsupported type value 0x%x, supported mask 0x%x\n",
@@ -597,89 +586,26 @@ int drm_wait_vblank(struct drm_device *dev, void *data,
 		vblwait->request.sequence = seq + 1;
 	}
 
-	if (flags & _DRM_VBLANK_SIGNAL) {
-		unsigned long irqflags;
-		struct list_head *vbl_sigs = &dev->vbl_sigs[crtc];
-		struct drm_vbl_sig *vbl_sig;
-
-		spin_lock_irqsave(&dev->vbl_lock, irqflags);
-
-		/* Check if this task has already scheduled the same signal
-		 * for the same vblank sequence number; nothing to be done in
-		 * that case
-		 */
-		list_for_each_entry(vbl_sig, vbl_sigs, head) {
-			if (vbl_sig->sequence == vblwait->request.sequence
-			    && vbl_sig->info.si_signo ==
-			    vblwait->request.signal
-			    && vbl_sig->task == current) {
-				spin_unlock_irqrestore(&dev->vbl_lock,
-						       irqflags);
-				vblwait->reply.sequence = seq;
-				goto done;
-			}
-		}
-
-		if (atomic_read(&dev->vbl_signal_pending) >= 100) {
-			spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
-			ret = -EBUSY;
-			goto done;
-		}
-
-		spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
-
-		vbl_sig = drm_calloc(1, sizeof(struct drm_vbl_sig),
-				     DRM_MEM_DRIVER);
-		if (!vbl_sig) {
-			ret = -ENOMEM;
-			goto done;
-		}
-
-		/* Get a refcount on the vblank, which will be released by
-		 * drm_vbl_send_signals().
-		 */
-		ret = drm_vblank_get(dev, crtc);
-		if (ret) {
-			drm_free(vbl_sig, sizeof(struct drm_vbl_sig),
-				 DRM_MEM_DRIVER);
-			goto done;
-		}
-
-		atomic_inc(&dev->vbl_signal_pending);
-
-		vbl_sig->sequence = vblwait->request.sequence;
-		vbl_sig->info.si_signo = vblwait->request.signal;
-		vbl_sig->task = current;
+	DRM_DEBUG("waiting on vblank count %d, crtc %d\n",
+		  vblwait->request.sequence, crtc);
+	dev->last_vblank_wait[crtc] = vblwait->request.sequence;
+	DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ,
+		    (((drm_vblank_count(dev, crtc) -
+		       vblwait->request.sequence) <= (1 << 23)) ||
+		     !dev->irq_enabled));
 
-		spin_lock_irqsave(&dev->vbl_lock, irqflags);
-
-		list_add_tail(&vbl_sig->head, vbl_sigs);
+	if (ret != -EINTR) {
+		struct timeval now;
 
-		spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
+		do_gettimeofday(&now);
 
-		vblwait->reply.sequence = seq;
+		vblwait->reply.tval_sec = now.tv_sec;
+		vblwait->reply.tval_usec = now.tv_usec;
+		vblwait->reply.sequence = drm_vblank_count(dev, crtc);
+		DRM_DEBUG("returning %d to client\n",
+			  vblwait->reply.sequence);
 	} else {
-		DRM_DEBUG("waiting on vblank count %d, crtc %d\n",
-			  vblwait->request.sequence, crtc);
-		dev->last_vblank_wait[crtc] = vblwait->request.sequence;
-		DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ,
-			    (((drm_vblank_count(dev, crtc) -
-			       vblwait->request.sequence) <= (1 << 23)) ||
-			     !dev->irq_enabled));
-
-		if (ret != -EINTR) {
-			struct timeval now;
-
-			do_gettimeofday(&now);
-
-			vblwait->reply.tval_sec = now.tv_sec;
-			vblwait->reply.tval_usec = now.tv_usec;
-			vblwait->reply.sequence = drm_vblank_count(dev, crtc);
-			DRM_DEBUG("returning %d to client\n",
-				  vblwait->reply.sequence);
-		} else {
-			DRM_DEBUG("vblank wait interrupted by signal\n");
-		}
+		DRM_DEBUG("vblank wait interrupted by signal\n");
 	}
 
 done:
@@ -688,46 +614,6 @@ done:
 }
 
 /**
- * Send the VBLANK signals.
- *
- * \param dev DRM device.
- * \param crtc CRTC where the vblank event occurred
- *
- * Sends a signal for each task in drm_device::vbl_sigs and empties the list.
- *
- * If a signal is not requested, then calls vblank_wait().
- */
-static void drm_vbl_send_signals(struct drm_device *dev, int crtc)
-{
-	struct drm_vbl_sig *vbl_sig, *tmp;
-	struct list_head *vbl_sigs;
-	unsigned int vbl_seq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dev->vbl_lock, flags);
-
-	vbl_sigs = &dev->vbl_sigs[crtc];
-	vbl_seq = drm_vblank_count(dev, crtc);
-
-	list_for_each_entry_safe(vbl_sig, tmp, vbl_sigs, head) {
-	    if ((vbl_seq - vbl_sig->sequence) <= (1 << 23)) {
-		vbl_sig->info.si_code = vbl_seq;
-		send_sig_info(vbl_sig->info.si_signo,
-			      &vbl_sig->info, vbl_sig->task);
-
-		list_del(&vbl_sig->head);
-
-		drm_free(vbl_sig, sizeof(*vbl_sig),
-			 DRM_MEM_DRIVER);
-		atomic_dec(&dev->vbl_signal_pending);
-		drm_vblank_put(dev, crtc);
-	    }
-	}
-
-	spin_unlock_irqrestore(&dev->vbl_lock, flags);
-}
-
-/**
  * drm_handle_vblank - handle a vblank event
  * @dev: DRM device
  * @crtc: where this event occurred
@@ -739,6 +625,5 @@ void drm_handle_vblank(struct drm_device *dev, int crtc)
 {
 	atomic_inc(&dev->_vblank_count[crtc]);
 	DRM_WAKEUP(&dev->vbl_queue[crtc]);
-	drm_vbl_send_signals(dev, crtc);
 }
 EXPORT_SYMBOL(drm_handle_vblank);
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index 5ca132afa4f..46bb923b097 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -118,12 +118,20 @@ static void drm_master_destroy(struct kref *kref)
 	struct drm_master *master = container_of(kref, struct drm_master, refcount);
 	struct drm_magic_entry *pt, *next;
 	struct drm_device *dev = master->minor->dev;
+	struct drm_map_list *r_list, *list_temp;
 
 	list_del(&master->head);
 
 	if (dev->driver->master_destroy)
 		dev->driver->master_destroy(dev, master);
 
+	list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head) {
+		if (r_list->master == master) {
+			drm_rmmap_locked(dev, r_list->map);
+			r_list = NULL;
+		}
+	}
+
 	if (master->unique) {
 		drm_free(master->unique, master->unique_size, DRM_MEM_DRIVER);
 		master->unique = NULL;
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index bbadf1c0414..ee64b7301f6 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -944,13 +944,14 @@ static int i915_load_modeset_init(struct drm_device *dev)
 	dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) &
 		0xff000000;
 
-	DRM_DEBUG("*** fb base 0x%08lx\n", dev->mode_config.fb_base);
-
-	if (IS_MOBILE(dev) || (IS_I9XX(dev) && !IS_I965G(dev) && !IS_G33(dev)))
+	if (IS_MOBILE(dev) || IS_I9XX(dev))
 		dev_priv->cursor_needs_physical = true;
 	else
 		dev_priv->cursor_needs_physical = false;
 
+	if (IS_I965G(dev) || IS_G33(dev))
+		dev_priv->cursor_needs_physical = false;
+
 	ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
 	if (ret)
 		goto kfree_devname;
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 96316fd4723..debad5c04cc 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3364,7 +3364,7 @@ void i915_gem_free_all_phys_object(struct drm_device *dev)
 {
 	int i;
 
-	for (i = 0; i < I915_MAX_PHYS_OBJECT; i++)
+	for (i = I915_GEM_PHYS_CURSOR_0; i <= I915_MAX_PHYS_OBJECT; i++)
 		i915_gem_free_phys_object(dev, i);
 }
 
@@ -3427,7 +3427,7 @@ i915_gem_attach_phys_object(struct drm_device *dev,
 		ret = i915_gem_init_phys_object(dev, id,
 						obj->size);
 		if (ret) {
-			DRM_ERROR("failed to init phys object %d size: %d\n", id, obj->size);
+			DRM_ERROR("failed to init phys object %d size: %zu\n", id, obj->size);
 			goto out;
 		}
 	}
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index a5a2f5339e9..5ee9d4c2575 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -137,10 +137,6 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
 	chan->reg = reg;
 	snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name);
 	chan->adapter.owner = THIS_MODULE;
-#ifndef I2C_HW_B_INTELFB
-#define I2C_HW_B_INTELFB I2C_HW_B_I810
-#endif
-	chan->adapter.id = I2C_HW_B_INTELFB;
 	chan->adapter.algo_data	= &chan->algo;
 	chan->adapter.dev.parent = &dev->pdev->dev;
 	chan->algo.setsda = set_data;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 2fafdcc108f..b36a5214d8d 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -311,7 +311,7 @@ static int intel_lvds_get_modes(struct drm_connector *connector)
 	if (dev_priv->panel_fixed_mode != NULL) {
 		struct drm_display_mode *mode;
 
-		mutex_unlock(&dev->mode_config.mutex);
+		mutex_lock(&dev->mode_config.mutex);
 		mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
 		drm_mode_probed_add(connector, mode);
 		mutex_unlock(&dev->mode_config.mutex);
@@ -340,6 +340,18 @@ static void intel_lvds_destroy(struct drm_connector *connector)
 	kfree(connector);
 }
 
+static int intel_lvds_set_property(struct drm_connector *connector,
+				   struct drm_property *property,
+				   uint64_t value)
+{
+	struct drm_device *dev = connector->dev;
+
+	if (property == dev->mode_config.dpms_property && connector->encoder)
+		intel_lvds_dpms(connector->encoder, (uint32_t)(value & 0xf));
+
+	return 0;
+}
+
 static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
 	.dpms = intel_lvds_dpms,
 	.mode_fixup = intel_lvds_mode_fixup,
@@ -359,6 +371,7 @@ static const struct drm_connector_funcs intel_lvds_connector_funcs = {
 	.restore = intel_lvds_restore,
 	.detect = intel_lvds_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = intel_lvds_set_property,
 	.destroy = intel_lvds_destroy,
 };
 
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 5d7640e49dc..6cad69ed21c 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1218,6 +1218,7 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask)
 }
 EXPORT_SYMBOL_GPL(hid_connect);
 
+/* a list of devices for which there is a specialized driver on HID bus */
 static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
@@ -1476,6 +1477,7 @@ static struct bus_type hid_bus_type = {
 	.uevent		= hid_uevent,
 };
 
+/* a list of devices that shouldn't be handled by HID core at all */
 static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302) },
@@ -1606,6 +1608,8 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index acc1abc834a..e899f510ebe 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -362,6 +362,8 @@
 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD	0x0038
 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2	0x0036
 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3	0x0034
+#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4	0x0044
+#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5	0x0045
 
 #define USB_VENDOR_ID_SUN		0x0430
 #define USB_DEVICE_ID_RARITAN_KVM_DONGLE	0xcdab
diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c
index d718b1607d0..25b10dcad90 100644
--- a/drivers/hid/hid-microsoft.c
+++ b/drivers/hid/hid-microsoft.c
@@ -30,7 +30,7 @@
 #define MS_NOGET	0x10
 
 /*
- * Microsoft Wireless Desktop Receiver (Model 1028) has several
+ * Microsoft Wireless Desktop Receiver (Model 1028) has
  * 'Usage Min/Max' where it ought to have 'Physical Min/Max'
  */
 static void ms_report_fixup(struct hid_device *hdev, __u8 *rdesc,
@@ -38,17 +38,12 @@ static void ms_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 {
 	unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
 
-	if ((quirks & MS_RDESC) && rsize == 571 && rdesc[284] == 0x19 &&
-			rdesc[286] == 0x2a && rdesc[304] == 0x19 &&
-			rdesc[306] == 0x29 && rdesc[352] == 0x1a &&
-			rdesc[355] == 0x2a && rdesc[557] == 0x19 &&
+	if ((quirks & MS_RDESC) && rsize == 571 && rdesc[557] == 0x19 &&
 			rdesc[559] == 0x29) {
 		dev_info(&hdev->dev, "fixing up Microsoft Wireless Receiver "
 				"Model 1028 report descriptor\n");
-		rdesc[284] = rdesc[304] = rdesc[557] = 0x35;
-		rdesc[352] = 0x36;
-		rdesc[286] = rdesc[355] = 0x46;
-		rdesc[306] = rdesc[559] = 0x45;
+		rdesc[557] = 0x35;
+		rdesc[559] = 0x45;
 	}
 }
 
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index d73eea382ab..4940e4d70c2 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -656,7 +656,7 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 	case HIDIOCGSTRING:
 		mutex_lock(&hiddev->existancelock);
-		if (!hiddev->exist)
+		if (hiddev->exist)
 			r = hiddev_ioctl_string(hiddev, cmd, user_arg);
 		else
 			r = -ENODEV;
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index e3018623658..678e34b01e5 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -83,7 +83,7 @@
 /*
  * Temperature sensors keys (sp78 - 2 bytes).
  */
-static const char* temperature_sensors_sets[][36] = {
+static const char *temperature_sensors_sets[][41] = {
 /* Set 0: Macbook Pro */
 	{ "TA0P", "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "Th0H",
 	  "Th1H", "Tm0P", "Ts0P", "Ts1P", NULL },
@@ -135,6 +135,13 @@ static const char* temperature_sensors_sets[][36] = {
 	{ "TB0T", "TB1S", "TB1T", "TB2S", "TB2T", "TC0D", "TN0D", "TTF0",
 	  "TV0P", "TVFP", "TW0P", "Th0P", "Tp0P", "Tp1P", "TpFP", "Ts0P",
 	  "Ts0S", NULL },
+/* Set 16: Mac Pro 3,1 (2 x Quad-Core) */
+	{ "TA0P", "TCAG", "TCAH", "TCBG", "TCBH", "TC0C", "TC0D", "TC0P",
+	  "TC1C", "TC1D", "TC2C", "TC2D", "TC3C", "TC3D", "TH0P", "TH1P",
+	  "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S", "TM1P",
+	  "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S",
+	  "TN0C", "TN0D", "TN0H", "TS0C", "Tp0C", "Tp1C", "Tv0S", "Tv1S",
+	  NULL },
 };
 
 /* List of keys used to read/write fan speeds */
@@ -1153,6 +1160,16 @@ static SENSOR_DEVICE_ATTR(temp34_input, S_IRUGO,
 					applesmc_show_temperature, NULL, 33);
 static SENSOR_DEVICE_ATTR(temp35_input, S_IRUGO,
 					applesmc_show_temperature, NULL, 34);
+static SENSOR_DEVICE_ATTR(temp36_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 35);
+static SENSOR_DEVICE_ATTR(temp37_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 36);
+static SENSOR_DEVICE_ATTR(temp38_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 37);
+static SENSOR_DEVICE_ATTR(temp39_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 38);
+static SENSOR_DEVICE_ATTR(temp40_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 39);
 
 static struct attribute *temperature_attributes[] = {
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
@@ -1190,6 +1207,11 @@ static struct attribute *temperature_attributes[] = {
 	&sensor_dev_attr_temp33_input.dev_attr.attr,
 	&sensor_dev_attr_temp34_input.dev_attr.attr,
 	&sensor_dev_attr_temp35_input.dev_attr.attr,
+	&sensor_dev_attr_temp36_input.dev_attr.attr,
+	&sensor_dev_attr_temp37_input.dev_attr.attr,
+	&sensor_dev_attr_temp38_input.dev_attr.attr,
+	&sensor_dev_attr_temp39_input.dev_attr.attr,
+	&sensor_dev_attr_temp40_input.dev_attr.attr,
 	NULL
 };
 
@@ -1312,6 +1334,8 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = {
 	{ .accelerometer = 0, .light = 0, .temperature_set = 14 },
 /* MacBook Air 2,1: accelerometer, backlight and temperature set 15 */
 	{ .accelerometer = 1, .light = 1, .temperature_set = 15 },
+/* MacPro3,1: temperature set 16 */
+	{ .accelerometer = 0, .light = 0, .temperature_set = 16 },
 };
 
 /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
@@ -1369,6 +1393,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
 	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
 		&applesmc_dmi_data[4]},
+	{ applesmc_dmi_match, "Apple MacPro3", {
+	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME, "MacPro3") },
+		&applesmc_dmi_data[16]},
 	{ applesmc_dmi_match, "Apple MacPro", {
 	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") },
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index 03705240000..abf4dfc8ec2 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -153,7 +153,10 @@ static struct axis_conversion lis3lv02d_axis_y_inverted = {1, -2, 3};
 static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3};
 static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3};
 static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3};
+static struct axis_conversion lis3lv02d_axis_xy_rotated_left_usd = {-2, 1, -3};
 static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3};
+static struct axis_conversion lis3lv02d_axis_xy_rotated_right = {2, -1, 3};
+static struct axis_conversion lis3lv02d_axis_xy_swap_yz_inverted = {2, -1, -3};
 
 #define AXIS_DMI_MATCH(_ident, _name, _axis) {		\
 	.ident = _ident,				\
@@ -172,10 +175,12 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
 	AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted),
 	AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted),
 	AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left),
+	AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd),
+	AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd),
+	AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right),
+	AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted),
 	{ NULL, }
 /* Laptop models without axis info (yet):
- * "NC651xx" "HP Compaq 651"
- * "NC671xx" "HP Compaq 671"
  * "NC6910" "HP Compaq 6910"
  * HP Compaq 8710x Notebook PC / Mobile Workstation
  * "NC2400" "HP Compaq nc2400"
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 75089febbc1..9fee3ca1734 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -83,7 +83,6 @@ static struct i2c_algo_bit_data ioc_data = {
 };
 
 static struct i2c_adapter ioc_ops = {
-	.id			= I2C_HW_B_IOC,
 	.algo_data		= &ioc_data,
 };
 
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 9cead9b9458..981e080b32a 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -476,7 +476,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter ali1535_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_ALI1535,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index dd9e796fad6..f70f46582c6 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -386,7 +386,6 @@ static const struct i2c_algorithm ali1563_algorithm = {
 
 static struct i2c_adapter ali1563_adapter = {
 	.owner	= THIS_MODULE,
-	.id	= I2C_HW_SMBUS_ALI1563,
 	.class	= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo	= &ali1563_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 234fdde7d40..39066dee46e 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -473,7 +473,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter ali15x3_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_ALI15X3,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 36bee5b9c95..220f4a1eee1 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -298,7 +298,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 struct i2c_adapter amd756_smbus = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_AMD756,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 3972208876b..edab51973bf 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -387,7 +387,6 @@ static int __devinit amd8111_probe(struct pci_dev *dev,
 	smbus->adapter.owner = THIS_MODULE;
 	snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
 		"SMBus2 AMD8111 adapter at %04x", smbus->base);
-	smbus->adapter.id = I2C_HW_SMBUS_AMD8111;
 	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	smbus->adapter.algo = &smbus_algorithm;
 	smbus->adapter.algo_data = smbus;
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 66a04c2c660..f78ce523e3d 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -400,7 +400,6 @@ i2c_au1550_probe(struct platform_device *pdev)
 	priv->xfer_timeout = 200;
 	priv->ack_timeout = 200;
 
-	priv->adap.id = I2C_HW_AU1550_PSC;
 	priv->adap.nr = pdev->id;
 	priv->adap.algo = &au1550_algo;
 	priv->adap.algo_data = priv;
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 3fd2c417c1e..fc548b3d002 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -651,7 +651,6 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 	iface->timeout_timer.data = (unsigned long)iface;
 
 	p_adap = &iface->adap;
-	p_adap->id = I2C_HW_BLACKFIN;
 	p_adap->nr = pdev->id;
 	strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
 	p_adap->algo = &bfin_twi_algorithm;
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 0ed3ccb81b6..448b4bf35eb 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -202,7 +202,6 @@ static struct i2c_algo_pcf_data pcf_isa_data = {
 static struct i2c_adapter pcf_isa_ops = {
 	.owner		= THIS_MODULE,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
-	.id		= I2C_HW_P_ELEK,
 	.algo_data	= &pcf_isa_data,
 	.name		= "i2c-elektor",
 };
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index 648aa7baff8..bec9b845dd1 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -102,7 +102,6 @@ static struct i2c_algo_bit_data hydra_bit_data = {
 static struct i2c_adapter hydra_adap = {
 	.owner		= THIS_MODULE,
 	.name		= "Hydra i2c",
-	.id		= I2C_HW_B_HYDRA,
 	.algo_data	= &hydra_bit_data,
 };
 
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 526625eaa84..230238df56c 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -556,7 +556,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter i801_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_I801,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 651f2f1ae5b..88f0db73b36 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -746,7 +746,6 @@ static int __devinit iic_probe(struct of_device *ofdev,
 	adap->dev.parent = &ofdev->dev;
 	strlcpy(adap->name, "IBM IIC", sizeof(adap->name));
 	i2c_set_adapdata(adap, dev);
-	adap->id = I2C_HW_OCP;
 	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adap->algo = &iic_algo;
 	adap->timeout = 1;
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index fc2714ac0c0..3190690c26c 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -480,7 +480,6 @@ iop3xx_i2c_probe(struct platform_device *pdev)
 	}
 
 	memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
-	new_adapter->id = I2C_HW_IOP3XX;
 	new_adapter->owner = THIS_MODULE;
 	new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	new_adapter->dev.parent = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 05d72e98135..8e846797048 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -116,7 +116,6 @@ static int ixp2000_i2c_probe(struct platform_device *plat_dev)
 	drv_data->algo_data.udelay = 6;
 	drv_data->algo_data.timeout = 100;
 
-	drv_data->adapter.id = I2C_HW_B_IXP2000,
 	strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
 		sizeof(drv_data->adapter.name));
 	drv_data->adapter.algo_data = &drv_data->algo_data,
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index a9a45fcc854..aedbbe6618d 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -310,7 +310,6 @@ static const struct i2c_algorithm mpc_algo = {
 static struct i2c_adapter mpc_ops = {
 	.owner = THIS_MODULE,
 	.name = "MPC adapter",
-	.id = I2C_HW_MPC107,
 	.algo = &mpc_algo,
 	.timeout = 1,
 };
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 9e8118d2fe6..eeda276f8f1 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -527,7 +527,6 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 		goto exit_unmap_regs;
 	}
 	drv_data->adapter.dev.parent = &pd->dev;
-	drv_data->adapter.id = I2C_HW_MV64XXX;
 	drv_data->adapter.algo = &mv64xxx_i2c_algo;
 	drv_data->adapter.owner = THIS_MODULE;
 	drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 3b19bc41a60..05af6cd7f27 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -355,7 +355,6 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar,
 		return -EBUSY;
 	}
 	smbus->adapter.owner = THIS_MODULE;
-	smbus->adapter.id = I2C_HW_SMBUS_NFORCE2;
 	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	smbus->adapter.algo = &smbus_algorithm;
 	smbus->adapter.algo_data = smbus;
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index b2b8380f660..322c5691e38 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -115,7 +115,6 @@ static struct i2c_algo_bit_data parport_algo_data = {
 static struct i2c_adapter parport_adapter = {
 	.owner		= THIS_MODULE,
 	.class		= I2C_CLASS_HWMON,
-	.id		= I2C_HW_B_LP,
 	.algo_data	= &parport_algo_data,
 	.name		= "Parallel port adapter (light)",
 };
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index a257cd5cd13..0d8998610c7 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -164,7 +164,6 @@ static void i2c_parport_attach (struct parport *port)
 	/* Fill the rest of the structure */
 	adapter->adapter.owner = THIS_MODULE;
 	adapter->adapter.class = I2C_CLASS_HWMON;
-	adapter->adapter.id = I2C_HW_B_LP;
 	strlcpy(adapter->adapter.name, "Parallel port adapter",
 		sizeof(adapter->adapter.name));
 	adapter->algo_data = parport_algo_data;
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 9eb76268ec7..4aa8138cb0a 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -101,7 +101,6 @@ static struct i2c_algo_pca_data pca_isa_data = {
 
 static struct i2c_adapter pca_isa_ops = {
 	.owner          = THIS_MODULE,
-	.id		= I2C_HW_A_ISA,
 	.algo_data	= &pca_isa_data,
 	.name		= "PCA9564 ISA Adapter",
 	.timeout	= 100,
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index eaa9b387543..761f9dd5362 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -403,7 +403,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter piix4_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_PIIX4,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 4ddefbf238e..98b1ec48915 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -155,7 +155,6 @@ static struct i2c_algo_sibyte_data sibyte_board_data[2] = {
 static struct i2c_adapter sibyte_board_adapter[2] = {
 	{
 		.owner		= THIS_MODULE,
-		.id		= I2C_HW_SIBYTE,
 		.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 		.algo		= NULL,
 		.algo_data	= &sibyte_board_data[0],
@@ -164,7 +163,6 @@ static struct i2c_adapter sibyte_board_adapter[2] = {
 	},
 	{
 		.owner		= THIS_MODULE,
-		.id		= I2C_HW_SIBYTE,
 		.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 		.algo		= NULL,
 		.algo_data	= &sibyte_board_data[1],
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 8ce2daff985..f320ab27da4 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -365,7 +365,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter sis5595_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_SIS5595,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 9c9c016ff2b..50c3610e602 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -464,7 +464,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter sis630_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_SIS630,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index f1bba639664..7e1594b4057 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -241,7 +241,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter sis96x_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_SIS96X,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
index 4678babd3ce..fede619ba22 100644
--- a/drivers/i2c/busses/i2c-versatile.c
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -102,7 +102,13 @@ static int i2c_versatile_probe(struct platform_device *dev)
 	i2c->algo = i2c_versatile_algo;
 	i2c->algo.data = i2c;
 
-	ret = i2c_bit_add_bus(&i2c->adap);
+	if (dev->id >= 0) {
+		/* static bus numbering */
+		i2c->adap.nr = dev->id;
+		ret = i2c_bit_add_numbered_bus(&i2c->adap);
+	} else
+		/* dynamic bus numbering */
+		ret = i2c_bit_add_bus(&i2c->adap);
 	if (ret >= 0) {
 		platform_set_drvdata(dev, i2c);
 		return 0;
@@ -146,7 +152,7 @@ static void __exit i2c_versatile_exit(void)
 	platform_driver_unregister(&i2c_versatile_driver);
 }
 
-module_init(i2c_versatile_init);
+subsys_initcall(i2c_versatile_init);
 module_exit(i2c_versatile_exit);
 
 MODULE_DESCRIPTION("ARM Versatile I2C bus driver");
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index 29cef0433f3..8b24f192103 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -83,7 +83,6 @@ static struct i2c_algo_bit_data bit_data = {
 
 static struct i2c_adapter vt586b_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_B_VIA,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.name		= "VIA i2c",
 	.algo_data	= &bit_data,
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 9f194d9efd9..02e6f724b05 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -321,7 +321,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter vt596_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_VIA2,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
index 1d4ae26ba73..1a474acc0dd 100644
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -163,7 +163,6 @@ static struct i2c_algo_bit_data voo_i2c_bit_data = {
 
 static struct i2c_adapter voodoo3_i2c_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_B_VOO,
 	.class		= I2C_CLASS_TV_ANALOG, 
 	.name		= "I2C Voodoo3/Banshee adapter",
 	.algo_data	= &voo_i2c_bit_data,
@@ -180,7 +179,6 @@ static struct i2c_algo_bit_data voo_ddc_bit_data = {
 
 static struct i2c_adapter voodoo3_ddc_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_B_VOO,
 	.class		= I2C_CLASS_DDC, 
 	.name		= "DDC Voodoo3/Banshee adapter",
 	.algo_data	= &voo_ddc_bit_data,
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index ed794b145a1..648ecc6f60e 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -440,7 +440,6 @@ static __init struct scx200_acb_iface *scx200_create_iface(const char *text,
 	i2c_set_adapdata(adapter, iface);
 	snprintf(adapter->name, sizeof(adapter->name), "%s ACB%d", text, index);
 	adapter->owner = THIS_MODULE;
-	adapter->id = I2C_HW_SMBUS_SCX200;
 	adapter->algo = &scx200_acb_algorithm;
 	adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adapter->dev.parent = dev;
diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
index e4c98539c51..162b74a0488 100644
--- a/drivers/i2c/busses/scx200_i2c.c
+++ b/drivers/i2c/busses/scx200_i2c.c
@@ -82,7 +82,6 @@ static struct i2c_algo_bit_data scx200_i2c_data = {
 static struct i2c_adapter scx200_i2c_ops = {
 	.owner		   = THIS_MODULE,
 	.class             = I2C_CLASS_HWMON | I2C_CLASS_SPD,
-	.id		   = I2C_HW_B_SCX200,
 	.algo_data	   = &scx200_i2c_data,
 	.name	= "NatSemi SCx200 I2C",
 };
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index b9bef04b7be..c80312c1f38 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -16,43 +16,6 @@ config DS1682
 	  This driver can also be built as a module.  If so, the module
 	  will be called ds1682.
 
-config AT24
-	tristate "EEPROMs from most vendors"
-	depends on SYSFS && EXPERIMENTAL
-	help
-	  Enable this driver to get read/write support to most I2C EEPROMs,
-	  after you configure the driver to know about each EEPROM on
-	  your target board.  Use these generic chip names, instead of
-	  vendor-specific ones like at24c64 or 24lc02:
-
-	     24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
-	     24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
-
-	  Unless you like data loss puzzles, always be sure that any chip
-	  you configure as a 24c32 (32 kbit) or larger is NOT really a
-	  24c16 (16 kbit) or smaller, and vice versa. Marking the chip
-	  as read-only won't help recover from this. Also, if your chip
-	  has any software write-protect mechanism you may want to review the
-	  code to make sure this driver won't turn it on by accident.
-
-	  If you use this with an SMBus adapter instead of an I2C adapter,
-	  full functionality is not available.  Only smaller devices are
-	  supported (24c16 and below, max 4 kByte).
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called at24.
-
-config SENSORS_EEPROM
-	tristate "EEPROM reader"
-	depends on EXPERIMENTAL
-	help
-	  If you say yes here you get read-only access to the EEPROM data
-	  available on modern memory DIMMs and Sony Vaio laptops.  Such
-	  EEPROMs could theoretically be available on other devices as well.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called eeprom.
-
 config SENSORS_PCF8574
 	tristate "Philips PCF8574 and PCF8574A (DEPRECATED)"
 	depends on EXPERIMENTAL && GPIO_PCF857X = "n"
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 00fcb5193ac..d142f238a2d 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -11,8 +11,6 @@
 #
 
 obj-$(CONFIG_DS1682)		+= ds1682.o
-obj-$(CONFIG_AT24)		+= at24.o
-obj-$(CONFIG_SENSORS_EEPROM)	+= eeprom.o
 obj-$(CONFIG_SENSORS_MAX6875)	+= max6875.o
 obj-$(CONFIG_SENSORS_PCA9539)	+= pca9539.o
 obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index b1c6f68d98c..3dad2299d9c 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -465,6 +465,16 @@ config BLK_DEV_CS5535
 
 	  It is safe to say Y to this question.
 
+config BLK_DEV_CS5536
+	tristate "CS5536 chipset support"
+	depends on X86_32
+	select BLK_DEV_IDEDMA_PCI
+	help
+	  This option enables support for the AMD CS5536
+	  companion chip used with the Geode LX processor family.
+
+	  If unsure, say N.
+
 config BLK_DEV_HPT366
 	tristate "HPT36X/37X chipset support"
 	select BLK_DEV_IDEDMA_PCI
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index c2b9c93f009..d0e3d7d5b46 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_BLK_DEV_CMD64X)		+= cmd64x.o
 obj-$(CONFIG_BLK_DEV_CS5520)		+= cs5520.o
 obj-$(CONFIG_BLK_DEV_CS5530)		+= cs5530.o
 obj-$(CONFIG_BLK_DEV_CS5535)		+= cs5535.o
+obj-$(CONFIG_BLK_DEV_CS5536)		+= cs5536.o
 obj-$(CONFIG_BLK_DEV_SC1200)		+= sc1200.o
 obj-$(CONFIG_BLK_DEV_CY82C693)		+= cy82c693.o
 obj-$(CONFIG_BLK_DEV_DELKIN)		+= delkin_cb.o
diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c
new file mode 100644
index 00000000000..7a62db719a4
--- /dev/null
+++ b/drivers/ide/cs5536.c
@@ -0,0 +1,308 @@
+/*
+ * CS5536 PATA support
+ * (C) 2007 Martin K. Petersen <mkp@mkp.net>
+ * (C) 2009 Bartlomiej Zolnierkiewicz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Documentation:
+ *	Available from AMD web site.
+ *
+ * The IDE timing registers for the CS5536 live in the Geode Machine
+ * Specific Register file and not PCI config space.  Most BIOSes
+ * virtualize the PCI registers so the chip looks like a standard IDE
+ * controller.  Unfortunately not all implementations get this right.
+ * In particular some have problems with unaligned accesses to the
+ * virtualized PCI registers.  This driver always does full dword
+ * writes to work around the issue.  Also, in case of a bad BIOS this
+ * driver can be loaded with the "msr=1" parameter which forces using
+ * the Machine Specific Registers to configure the device.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+#include <asm/msr.h>
+
+#define DRV_NAME	"cs5536"
+
+enum {
+	MSR_IDE_CFG		= 0x51300010,
+	PCI_IDE_CFG		= 0x40,
+
+	CFG			= 0,
+	DTC			= 2,
+	CAST			= 3,
+	ETC			= 4,
+
+	IDE_CFG_CHANEN		= (1 << 1),
+	IDE_CFG_CABLE		= (1 << 17) | (1 << 16),
+
+	IDE_D0_SHIFT		= 24,
+	IDE_D1_SHIFT		= 16,
+	IDE_DRV_MASK		= 0xff,
+
+	IDE_CAST_D0_SHIFT	= 6,
+	IDE_CAST_D1_SHIFT	= 4,
+	IDE_CAST_DRV_MASK	= 0x3,
+
+	IDE_CAST_CMD_SHIFT	= 24,
+	IDE_CAST_CMD_MASK	= 0xff,
+
+	IDE_ETC_UDMA_MASK	= 0xc0,
+};
+
+static int use_msr;
+
+static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
+{
+	if (unlikely(use_msr)) {
+		u32 dummy;
+
+		rdmsr(MSR_IDE_CFG + reg, *val, dummy);
+		return 0;
+	}
+
+	return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
+}
+
+static int cs5536_write(struct pci_dev *pdev, int reg, int val)
+{
+	if (unlikely(use_msr)) {
+		wrmsr(MSR_IDE_CFG + reg, val, 0);
+		return 0;
+	}
+
+	return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
+}
+
+static void cs5536_program_dtc(ide_drive_t *drive, u8 tim)
+{
+	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+	int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
+	u32 dtc;
+
+	cs5536_read(pdev, DTC, &dtc);
+	dtc &= ~(IDE_DRV_MASK << dshift);
+	dtc |= tim << dshift;
+	cs5536_write(pdev, DTC, dtc);
+}
+
+/**
+ *	cs5536_cable_detect	-	detect cable type
+ *	@hwif: Port to detect on
+ *
+ *	Perform cable detection for ATA66 capable cable.
+ *
+ *	Returns a cable type.
+ */
+
+static u8 cs5536_cable_detect(ide_hwif_t *hwif)
+{
+	struct pci_dev *pdev = to_pci_dev(hwif->dev);
+	u32 cfg;
+
+	cs5536_read(pdev, CFG, &cfg);
+
+	if (cfg & IDE_CFG_CABLE)
+		return ATA_CBL_PATA80;
+	else
+		return ATA_CBL_PATA40;
+}
+
+/**
+ *	cs5536_set_pio_mode		-	PIO timing setup
+ *	@drive: ATA device
+ *	@pio: PIO mode number
+ */
+
+static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+	static const u8 drv_timings[5] = {
+		0x98, 0x55, 0x32, 0x21, 0x20,
+	};
+
+	static const u8 addr_timings[5] = {
+		0x2, 0x1, 0x0, 0x0, 0x0,
+	};
+
+	static const u8 cmd_timings[5] = {
+		0x99, 0x92, 0x90, 0x22, 0x20,
+	};
+
+	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+	ide_drive_t *pair = ide_get_pair_dev(drive);
+	int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
+	u32 cast;
+	u8 cmd_pio = pio;
+
+	if (pair)
+		cmd_pio = min(pio, ide_get_best_pio_mode(pair, 255, 4));
+
+	drive->drive_data &= (IDE_DRV_MASK << 8);
+	drive->drive_data |= drv_timings[pio];
+
+	cs5536_program_dtc(drive, drv_timings[pio]);
+
+	cs5536_read(pdev, CAST, &cast);
+
+	cast &= ~(IDE_CAST_DRV_MASK << cshift);
+	cast |= addr_timings[pio] << cshift;
+
+	cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
+	cast |= cmd_timings[cmd_pio] << IDE_CAST_CMD_SHIFT;
+
+	cs5536_write(pdev, CAST, cast);
+}
+
+/**
+ *	cs5536_set_dma_mode		-	DMA timing setup
+ *	@drive: ATA device
+ *	@mode: DMA mode
+ */
+
+static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode)
+{
+	static const u8 udma_timings[6] = {
+		0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
+	};
+
+	static const u8 mwdma_timings[3] = {
+		0x67, 0x21, 0x20,
+	};
+
+	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+	int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
+	u32 etc;
+
+	cs5536_read(pdev, ETC, &etc);
+
+	if (mode >= XFER_UDMA_0) {
+		etc &= ~(IDE_DRV_MASK << dshift);
+		etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
+	} else { /* MWDMA */
+		etc &= ~(IDE_ETC_UDMA_MASK << dshift);
+		drive->drive_data &= IDE_DRV_MASK;
+		drive->drive_data |= mwdma_timings[mode - XFER_MW_DMA_0] << 8;
+	}
+
+	cs5536_write(pdev, ETC, etc);
+}
+
+static void cs5536_dma_start(ide_drive_t *drive)
+{
+	if (drive->current_speed < XFER_UDMA_0 &&
+	    (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK))
+		cs5536_program_dtc(drive, drive->drive_data >> 8);
+
+	ide_dma_start(drive);
+}
+
+static int cs5536_dma_end(ide_drive_t *drive)
+{
+	int ret = ide_dma_end(drive);
+
+	if (drive->current_speed < XFER_UDMA_0 &&
+	    (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK))
+		cs5536_program_dtc(drive, drive->drive_data & IDE_DRV_MASK);
+
+	return ret;
+}
+
+static const struct ide_port_ops cs5536_port_ops = {
+	.set_pio_mode		= cs5536_set_pio_mode,
+	.set_dma_mode		= cs5536_set_dma_mode,
+	.cable_detect		= cs5536_cable_detect,
+};
+
+static const struct ide_dma_ops cs5536_dma_ops = {
+	.dma_host_set		= ide_dma_host_set,
+	.dma_setup		= ide_dma_setup,
+	.dma_exec_cmd		= ide_dma_exec_cmd,
+	.dma_start		= cs5536_dma_start,
+	.dma_end		= cs5536_dma_end,
+	.dma_test_irq		= ide_dma_test_irq,
+	.dma_lost_irq		= ide_dma_lost_irq,
+	.dma_timeout		= ide_dma_timeout,
+};
+
+static const struct ide_port_info cs5536_info = {
+	.name		= DRV_NAME,
+	.port_ops	= &cs5536_port_ops,
+	.dma_ops	= &cs5536_dma_ops,
+	.host_flags	= IDE_HFLAG_SINGLE,
+	.pio_mask	= ATA_PIO4,
+	.mwdma_mask	= ATA_MWDMA2,
+	.udma_mask	= ATA_UDMA5,
+};
+
+/**
+ *	cs5536_init_one
+ *	@dev: PCI device
+ *	@id: Entry in match table
+ */
+
+static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	u32 cfg;
+
+	if (use_msr)
+		printk(KERN_INFO DRV_NAME ": Using MSR regs instead of PCI\n");
+
+	cs5536_read(dev, CFG, &cfg);
+
+	if ((cfg & IDE_CFG_CHANEN) == 0) {
+		printk(KERN_ERR DRV_NAME ": disabled by BIOS\n");
+		return -ENODEV;
+	}
+
+	return ide_pci_init_one(dev, &cs5536_info, NULL);
+}
+
+static const struct pci_device_id cs5536_pci_tbl[] = {
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), },
+	{ },
+};
+
+static struct pci_driver cs5536_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= cs5536_pci_tbl,
+	.probe		= cs5536_init_one,
+	.remove		= ide_pci_remove,
+	.suspend	= ide_pci_suspend,
+	.resume		= ide_pci_resume,
+};
+
+static int __init cs5536_init(void)
+{
+	return pci_register_driver(&cs5536_pci_driver);
+}
+
+static void __exit cs5536_exit(void)
+{
+	pci_unregister_driver(&cs5536_pci_driver);
+}
+
+MODULE_AUTHOR("Martin K. Petersen, Bartlomiej Zolnierkiewicz");
+MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cs5536_pci_tbl);
+
+module_param_named(msr, use_msr, int, 0644);
+MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
+
+module_init(cs5536_init);
+module_exit(cs5536_exit);
diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c
index a5ba820d69b..a638e952d67 100644
--- a/drivers/ide/falconide.c
+++ b/drivers/ide/falconide.c
@@ -82,7 +82,7 @@ static const struct ide_tp_ops falconide_tp_ops = {
 
 static const struct ide_port_info falconide_port_info = {
 	.tp_ops			= &falconide_tp_ops,
-	.host_flags		= IDE_HFLAG_NO_DMA,
+	.host_flags		= IDE_HFLAG_NO_DMA | IDE_HFLAG_SERIALIZE,
 };
 
 static void __init falconide_setup_ports(hw_regs_t *hw)
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 97a35c667ae..415d7e24f2b 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -534,7 +534,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 		d.dma_ops = NULL;
 	}
 
-	ret = ide_host_register(host, NULL, hws);
+	ret = ide_host_register(host, &d, hws);
 	if (ret)
 		goto err_free;
 
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index d8f295bdad7..ec7d07fa570 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -282,7 +282,7 @@ static int do_drive_get_GTF(ide_drive_t *drive,
 	port = hwif->channel ? drive->dn - 2: drive->dn;
 
 	DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n",
-		 hwif->name, dev->bus_id, port, hwif->channel);
+		 hwif->name, dev_name(dev), port, hwif->channel);
 
 	if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) {
 		DEBPRINT("%s drive %d:%d not present\n",
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index cae69372cf4..0bfeb0c79d6 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -787,6 +787,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 		if (blk_fs_request(rq)) {
 			ide_end_request(drive, 1, rq->nr_sectors);
 			return ide_stopped;
+		} else if (rq->cmd_type == REQ_TYPE_ATA_PC && !rq->bio) {
+			ide_end_request(drive, 1, 1);
+			return ide_stopped;
 		}
 		goto end_request;
 	}
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index cc163319dfb..9ee51adf567 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -418,11 +418,14 @@ void ide_map_sg(ide_drive_t *drive, struct request *rq)
 	ide_hwif_t *hwif = drive->hwif;
 	struct scatterlist *sg = hwif->sg_table;
 
-	if (rq->cmd_type != REQ_TYPE_ATA_TASKFILE) {
-		hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
-	} else {
+	if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
 		sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE);
 		hwif->sg_nents = 1;
+	} else if (!rq->bio) {
+		sg_init_one(sg, rq->data, rq->data_len);
+		hwif->sg_nents = 1;
+	} else {
+		hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
 	}
 }
 
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 312127ea443..ce0818a993f 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -649,7 +649,8 @@ static int ide_register_port(ide_hwif_t *hwif)
 	/* register with global device tree */
 	dev_set_name(&hwif->gendev, hwif->name);
 	hwif->gendev.driver_data = hwif;
-	hwif->gendev.parent = hwif->dev;
+	if (hwif->gendev.parent == NULL)
+		hwif->gendev.parent = hwif->dev;
 	hwif->gendev.release = hwif_release_dev;
 
 	ret = device_register(&hwif->gendev);
@@ -1466,6 +1467,30 @@ struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws)
 }
 EXPORT_SYMBOL_GPL(ide_host_alloc);
 
+static void ide_port_free(ide_hwif_t *hwif)
+{
+	ide_port_free_devices(hwif);
+	ide_free_port_slot(hwif->index);
+	kfree(hwif);
+}
+
+static void ide_disable_port(ide_hwif_t *hwif)
+{
+	struct ide_host *host = hwif->host;
+	int i;
+
+	printk(KERN_INFO "%s: disabling port\n", hwif->name);
+
+	for (i = 0; i < MAX_HOST_PORTS; i++) {
+		if (host->ports[i] == hwif) {
+			host->ports[i] = NULL;
+			host->n_ports--;
+		}
+	}
+
+	ide_port_free(hwif);
+}
+
 int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 		      hw_regs_t **hws)
 {
@@ -1506,8 +1531,12 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 			hwif->present = 1;
 
 		if (hwif->chipset != ide_4drives || !hwif->mate ||
-		    !hwif->mate->present)
-			ide_register_port(hwif);
+		    !hwif->mate->present) {
+			if (ide_register_port(hwif)) {
+				ide_disable_port(hwif);
+				continue;
+			}
+		}
 
 		if (hwif->present)
 			ide_port_tune_devices(hwif);
@@ -1520,7 +1549,8 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 		if (hwif_init(hwif) == 0) {
 			printk(KERN_INFO "%s: failed to initialize IDE "
 					 "interface\n", hwif->name);
-			hwif->present = 0;
+			device_unregister(&hwif->gendev);
+			ide_disable_port(hwif);
 			continue;
 		}
 
@@ -1659,12 +1689,8 @@ void ide_host_free(struct ide_host *host)
 	int i;
 
 	ide_host_for_each_port(i, hwif, host) {
-		if (hwif == NULL)
-			continue;
-
-		ide_port_free_devices(hwif);
-		ide_free_port_slot(hwif->index);
-		kfree(hwif);
+		if (hwif)
+			ide_port_free(hwif);
 	}
 
 	kfree(host);
diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
index a7ac490c9ae..f38aac78044 100644
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -346,7 +346,8 @@ static int __init palm_bk3710_probe(struct platform_device *pdev)
 {
 	struct clk *clk;
 	struct resource *mem, *irq;
-	unsigned long base, rate;
+	void __iomem *base;
+	unsigned long rate;
 	int i, rc;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
@@ -382,11 +383,13 @@ static int __init palm_bk3710_probe(struct platform_device *pdev)
 	base = IO_ADDRESS(mem->start);
 
 	/* Configure the Palm Chip controller */
-	palm_bk3710_chipinit((void __iomem *)base);
+	palm_bk3710_chipinit(base);
 
 	for (i = 0; i < IDE_NR_PORTS - 2; i++)
-		hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
-	hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
+		hw.io_ports_array[i] = (unsigned long)
+				(base + IDE_PALM_ATA_PRI_REG_OFFSET + i);
+	hw.io_ports.ctl_addr = (unsigned long)
+			(base + IDE_PALM_ATA_PRI_CTL_OFFSET);
 	hw.irq = irq->start;
 	hw.dev = &pdev->dev;
 	hw.chipset = ide_palm3710;
diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c
index 5b2e3af43c4..08c4fa35e9b 100644
--- a/drivers/ide/qd65xx.c
+++ b/drivers/ide/qd65xx.c
@@ -16,7 +16,7 @@
 
 /*
  * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
- * Samuel Thibault <samuel.thibault@fnac.net>
+ * Samuel Thibault <samuel.thibault@ens-lyon.org>
  */
 
 #include <linux/module.h>
diff --git a/drivers/ide/qd65xx.h b/drivers/ide/qd65xx.h
index 6636f9665d1..d7e67a1a1dc 100644
--- a/drivers/ide/qd65xx.h
+++ b/drivers/ide/qd65xx.h
@@ -4,7 +4,7 @@
 
 /*
  * Authors:	Petr Soucek <petr@ryston.cz>
- * 		Samuel Thibault <samuel.thibault@fnac.net>
+ * 		Samuel Thibault <samuel.thibault@ens-lyon.org>
  */
 
 /* truncates a in [b,c] */
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
index 882f6f07c47..40b0812a045 100644
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -261,9 +261,9 @@ static int tx4939ide_build_dmatable(ide_drive_t *drive, struct request *rq)
 				bcount = cur_len;
 			/*
 			 * This workaround for zero count seems required.
-			 * (standard ide_build_dmatable do it too)
+			 * (standard ide_build_dmatable does it too)
 			 */
-			if ((bcount & 0xffff) == 0x0000)
+			if (bcount == 0x10000)
 				bcount = 0x8000;
 			*table++ = bcount & 0xffff;
 			*table++ = cur_addr;
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 703c3eeb20a..6092fe3f409 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -448,6 +448,11 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 		d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS;
 #endif
 
+#ifdef CONFIG_AMIGAONE
+	if (machine_is(amigaone))
+		d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS;
+#endif
+
 	d.udma_mask = via_config->udma_mask;
 
 	vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c
index a329e6bd5d2..3838bc4acab 100644
--- a/drivers/ieee1394/dv1394.c
+++ b/drivers/ieee1394/dv1394.c
@@ -1823,6 +1823,10 @@ static int dv1394_open(struct inode *inode, struct file *file)
 
 #endif
 
+	printk(KERN_INFO "%s: NOTE, the dv1394 interface is unsupported "
+	       "and will not be available in the new firewire driver stack. "
+	       "Try libraw1394 based programs instead.\n", current->comm);
+
 	return 0;
 }
 
@@ -2567,10 +2571,6 @@ static int __init dv1394_init_module(void)
 {
 	int ret;
 
-	printk(KERN_WARNING
-	       "NOTE: The dv1394 driver is unsupported and may be removed in a "
-	       "future Linux release. Use raw1394 instead.\n");
-
 	cdev_init(&dv1394_cdev, &dv1394_fops);
 	dv1394_cdev.owner = THIS_MODULE;
 	ret = cdev_add(&dv1394_cdev, IEEE1394_DV1394_DEV, 16);
diff --git a/drivers/ieee1394/ieee1394.h b/drivers/ieee1394/ieee1394.h
index e0ae0d3d747..af320e2c507 100644
--- a/drivers/ieee1394/ieee1394.h
+++ b/drivers/ieee1394/ieee1394.h
@@ -54,9 +54,7 @@
 #define IEEE1394_SPEED_800	0x03
 #define IEEE1394_SPEED_1600	0x04
 #define IEEE1394_SPEED_3200	0x05
-
-/* The current highest tested speed supported by the subsystem */
-#define IEEE1394_SPEED_MAX	IEEE1394_SPEED_800
+#define IEEE1394_SPEED_MAX	IEEE1394_SPEED_3200
 
 /* Maps speed values above to a string representation */
 extern const char *hpsb_speedto_str[];
diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c
index dcdb71a7718..2beb8d94f7b 100644
--- a/drivers/ieee1394/ieee1394_core.c
+++ b/drivers/ieee1394/ieee1394_core.c
@@ -338,6 +338,7 @@ static void build_speed_map(struct hpsb_host *host, int nodecount)
 	u8 cldcnt[nodecount];
 	u8 *map = host->speed_map;
 	u8 *speedcap = host->speed;
+	u8 local_link_speed = host->csr.lnk_spd;
 	struct selfid *sid;
 	struct ext_selfid *esid;
 	int i, j, n;
@@ -373,8 +374,8 @@ static void build_speed_map(struct hpsb_host *host, int nodecount)
 			if (sid->port2 == SELFID_PORT_CHILD) cldcnt[n]++;
 
 			speedcap[n] = sid->speed;
-			if (speedcap[n] > host->csr.lnk_spd)
-				speedcap[n] = host->csr.lnk_spd;
+			if (speedcap[n] > local_link_speed)
+				speedcap[n] = local_link_speed;
 			n--;
 		}
 	}
@@ -407,12 +408,11 @@ static void build_speed_map(struct hpsb_host *host, int nodecount)
 		}
 	}
 
-#if SELFID_SPEED_UNKNOWN != IEEE1394_SPEED_MAX
-	/* assume maximum speed for 1394b PHYs, nodemgr will correct it */
-	for (n = 0; n < nodecount; n++)
-		if (speedcap[n] == SELFID_SPEED_UNKNOWN)
-			speedcap[n] = IEEE1394_SPEED_MAX;
-#endif
+	/* assume a maximum speed for 1394b PHYs, nodemgr will correct it */
+	if (local_link_speed > SELFID_SPEED_UNKNOWN)
+		for (i = 0; i < nodecount; i++)
+			if (speedcap[i] == SELFID_SPEED_UNKNOWN)
+				speedcap[i] = local_link_speed;
 }
 
 
diff --git a/drivers/ieee1394/ohci1394.h b/drivers/ieee1394/ohci1394.h
index 4320bf01049..7fb8ab9780a 100644
--- a/drivers/ieee1394/ohci1394.h
+++ b/drivers/ieee1394/ohci1394.h
@@ -26,7 +26,7 @@
 
 #define OHCI1394_DRIVER_NAME      "ohci1394"
 
-#define OHCI1394_MAX_AT_REQ_RETRIES	0x2
+#define OHCI1394_MAX_AT_REQ_RETRIES	0xf
 #define OHCI1394_MAX_AT_RESP_RETRIES	0x2
 #define OHCI1394_MAX_PHYS_RESP_RETRIES	0x8
 #define OHCI1394_MAX_SELF_ID_ERRORS	16
diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index dc15cadb06e..38f71203620 100644
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -1419,7 +1419,6 @@ static int __devinit add_card(struct pci_dev *dev,
 		i2c_ad = kzalloc(sizeof(*i2c_ad), GFP_KERNEL);
         	if (!i2c_ad) FAIL("failed to allocate I2C adapter memory");
 
-		i2c_ad->id = I2C_HW_B_PCILYNX;
 		strlcpy(i2c_ad->name, "PCILynx I2C", sizeof(i2c_ad->name));
                 i2c_adapter_data = bit_data;
                 i2c_ad->algo_data = &i2c_adapter_data;
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index ab1034ccb7f..f3fd8657ce4 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -115,8 +115,8 @@
  */
 static int sbp2_max_speed = IEEE1394_SPEED_MAX;
 module_param_named(max_speed, sbp2_max_speed, int, 0644);
-MODULE_PARM_DESC(max_speed, "Force max speed "
-		 "(3 = 800Mb/s, 2 = 400Mb/s, 1 = 200Mb/s, 0 = 100Mb/s)");
+MODULE_PARM_DESC(max_speed, "Limit data transfer speed (5 <= 3200, "
+		 "4 <= 1600, 3 <= 800, 2 <= 400, 1 <= 200, 0 = 100 Mb/s)");
 
 /*
  * Set serialize_io to 0 or N to use dynamically appended lists of command ORBs.
@@ -256,7 +256,7 @@ static int sbp2_set_busy_timeout(struct sbp2_lu *);
 static int sbp2_max_speed_and_size(struct sbp2_lu *);
 
 
-static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xA, 0xB, 0xC };
+static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xa, 0xa, 0xa };
 
 static DEFINE_RWLOCK(sbp2_hi_logical_units_lock);
 
@@ -347,8 +347,8 @@ static struct scsi_host_template sbp2_shost_template = {
 	.sdev_attrs		 = sbp2_sysfs_sdev_attrs,
 };
 
-/* for match-all entries in sbp2_workarounds_table */
-#define SBP2_ROM_VALUE_WILDCARD 0x1000000
+#define SBP2_ROM_VALUE_WILDCARD ~0         /* match all */
+#define SBP2_ROM_VALUE_MISSING  0xff000000 /* not present in the unit dir. */
 
 /*
  * List of devices with known bugs.
@@ -359,60 +359,70 @@ static struct scsi_host_template sbp2_shost_template = {
  */
 static const struct {
 	u32 firmware_revision;
-	u32 model_id;
+	u32 model;
 	unsigned workarounds;
 } sbp2_workarounds_table[] = {
 	/* DViCO Momobay CX-1 with TSB42AA9 bridge */ {
 		.firmware_revision	= 0x002800,
-		.model_id		= 0x001010,
+		.model			= 0x001010,
 		.workarounds		= SBP2_WORKAROUND_INQUIRY_36 |
 					  SBP2_WORKAROUND_MODE_SENSE_8 |
 					  SBP2_WORKAROUND_POWER_CONDITION,
 	},
 	/* DViCO Momobay FX-3A with TSB42AA9A bridge */ {
 		.firmware_revision	= 0x002800,
-		.model_id		= 0x000000,
+		.model			= 0x000000,
 		.workarounds		= SBP2_WORKAROUND_DELAY_INQUIRY |
 					  SBP2_WORKAROUND_POWER_CONDITION,
 	},
 	/* Initio bridges, actually only needed for some older ones */ {
 		.firmware_revision	= 0x000200,
-		.model_id		= SBP2_ROM_VALUE_WILDCARD,
+		.model			= SBP2_ROM_VALUE_WILDCARD,
 		.workarounds		= SBP2_WORKAROUND_INQUIRY_36,
 	},
 	/* PL-3507 bridge with Prolific firmware */ {
 		.firmware_revision	= 0x012800,
-		.model_id		= SBP2_ROM_VALUE_WILDCARD,
+		.model			= SBP2_ROM_VALUE_WILDCARD,
 		.workarounds		= SBP2_WORKAROUND_POWER_CONDITION,
 	},
 	/* Symbios bridge */ {
 		.firmware_revision	= 0xa0b800,
-		.model_id		= SBP2_ROM_VALUE_WILDCARD,
+		.model			= SBP2_ROM_VALUE_WILDCARD,
 		.workarounds		= SBP2_WORKAROUND_128K_MAX_TRANS,
 	},
 	/* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ {
 		.firmware_revision	= 0x002600,
-		.model_id		= SBP2_ROM_VALUE_WILDCARD,
+		.model			= SBP2_ROM_VALUE_WILDCARD,
 		.workarounds		= SBP2_WORKAROUND_128K_MAX_TRANS,
 	},
+	/*
+	 * iPod 2nd generation: needs 128k max transfer size workaround
+	 * iPod 3rd generation: needs fix capacity workaround
+	 */
+	{
+		.firmware_revision	= 0x0a2700,
+		.model			= 0x000000,
+		.workarounds		= SBP2_WORKAROUND_128K_MAX_TRANS |
+					  SBP2_WORKAROUND_FIX_CAPACITY,
+	},
 	/* iPod 4th generation */ {
 		.firmware_revision	= 0x0a2700,
-		.model_id		= 0x000021,
+		.model			= 0x000021,
 		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
 	},
 	/* iPod mini */ {
 		.firmware_revision	= 0x0a2700,
-		.model_id		= 0x000022,
+		.model			= 0x000022,
 		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
 	},
 	/* iPod mini */ {
 		.firmware_revision	= 0x0a2700,
-		.model_id		= 0x000023,
+		.model			= 0x000023,
 		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
 	},
 	/* iPod Photo */ {
 		.firmware_revision	= 0x0a2700,
-		.model_id		= 0x00007e,
+		.model			= 0x00007e,
 		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
 	}
 };
@@ -1341,13 +1351,15 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu,
 	struct csr1212_keyval *kv;
 	struct csr1212_dentry *dentry;
 	u64 management_agent_addr;
-	u32 unit_characteristics, firmware_revision;
+	u32 unit_characteristics, firmware_revision, model;
 	unsigned workarounds;
 	int i;
 
 	management_agent_addr = 0;
 	unit_characteristics = 0;
-	firmware_revision = 0;
+	firmware_revision = SBP2_ROM_VALUE_MISSING;
+	model = ud->flags & UNIT_DIRECTORY_MODEL_ID ?
+				ud->model_id : SBP2_ROM_VALUE_MISSING;
 
 	csr1212_for_each_dir_entry(ud->ne->csr, kv, ud->ud_kv, dentry) {
 		switch (kv->key.id) {
@@ -1388,9 +1400,9 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu,
 			    sbp2_workarounds_table[i].firmware_revision !=
 			    (firmware_revision & 0xffff00))
 				continue;
-			if (sbp2_workarounds_table[i].model_id !=
+			if (sbp2_workarounds_table[i].model !=
 			    SBP2_ROM_VALUE_WILDCARD &&
-			    sbp2_workarounds_table[i].model_id != ud->model_id)
+			    sbp2_workarounds_table[i].model != model)
 				continue;
 			workarounds |= sbp2_workarounds_table[i].workarounds;
 			break;
@@ -1403,7 +1415,7 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu,
 			  NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
 			  workarounds, firmware_revision,
 			  ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id,
-			  ud->model_id);
+			  model);
 
 	/* We would need one SCSI host template for each target to adjust
 	 * max_sectors on the fly, therefore warn only. */
diff --git a/drivers/infiniband/hw/ehca/ehca_cq.c b/drivers/infiniband/hw/ehca/ehca_cq.c
index 2f4c28a3027..97e4b231cdc 100644
--- a/drivers/infiniband/hw/ehca/ehca_cq.c
+++ b/drivers/infiniband/hw/ehca/ehca_cq.c
@@ -196,7 +196,7 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector,
 
 	if (h_ret != H_SUCCESS) {
 		ehca_err(device, "hipz_h_alloc_resource_cq() failed "
-			 "h_ret=%li device=%p", h_ret, device);
+			 "h_ret=%lli device=%p", h_ret, device);
 		cq = ERR_PTR(ehca2ib_return_code(h_ret));
 		goto create_cq_exit2;
 	}
@@ -232,7 +232,7 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector,
 
 		if (h_ret < H_SUCCESS) {
 			ehca_err(device, "hipz_h_register_rpage_cq() failed "
-				 "ehca_cq=%p cq_num=%x h_ret=%li counter=%i "
+				 "ehca_cq=%p cq_num=%x h_ret=%lli counter=%i "
 				 "act_pages=%i", my_cq, my_cq->cq_number,
 				 h_ret, counter, param.act_pages);
 			cq = ERR_PTR(-EINVAL);
@@ -244,7 +244,7 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector,
 			if ((h_ret != H_SUCCESS) || vpage) {
 				ehca_err(device, "Registration of pages not "
 					 "complete ehca_cq=%p cq_num=%x "
-					 "h_ret=%li", my_cq, my_cq->cq_number,
+					 "h_ret=%lli", my_cq, my_cq->cq_number,
 					 h_ret);
 				cq = ERR_PTR(-EAGAIN);
 				goto create_cq_exit4;
@@ -252,7 +252,7 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector,
 		} else {
 			if (h_ret != H_PAGE_REGISTERED) {
 				ehca_err(device, "Registration of page failed "
-					 "ehca_cq=%p cq_num=%x h_ret=%li "
+					 "ehca_cq=%p cq_num=%x h_ret=%lli "
 					 "counter=%i act_pages=%i",
 					 my_cq, my_cq->cq_number,
 					 h_ret, counter, param.act_pages);
@@ -266,7 +266,7 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector,
 
 	gal = my_cq->galpas.kernel;
 	cqx_fec = hipz_galpa_load(gal, CQTEMM_OFFSET(cqx_fec));
-	ehca_dbg(device, "ehca_cq=%p cq_num=%x CQX_FEC=%lx",
+	ehca_dbg(device, "ehca_cq=%p cq_num=%x CQX_FEC=%llx",
 		 my_cq, my_cq->cq_number, cqx_fec);
 
 	my_cq->ib_cq.cqe = my_cq->nr_of_entries =
@@ -307,7 +307,7 @@ create_cq_exit3:
 	h_ret = hipz_h_destroy_cq(adapter_handle, my_cq, 1);
 	if (h_ret != H_SUCCESS)
 		ehca_err(device, "hipz_h_destroy_cq() failed ehca_cq=%p "
-			 "cq_num=%x h_ret=%li", my_cq, my_cq->cq_number, h_ret);
+			 "cq_num=%x h_ret=%lli", my_cq, my_cq->cq_number, h_ret);
 
 create_cq_exit2:
 	write_lock_irqsave(&ehca_cq_idr_lock, flags);
@@ -355,7 +355,7 @@ int ehca_destroy_cq(struct ib_cq *cq)
 	h_ret = hipz_h_destroy_cq(adapter_handle, my_cq, 0);
 	if (h_ret == H_R_STATE) {
 		/* cq in err: read err data and destroy it forcibly */
-		ehca_dbg(device, "ehca_cq=%p cq_num=%x ressource=%lx in err "
+		ehca_dbg(device, "ehca_cq=%p cq_num=%x resource=%llx in err "
 			 "state. Try to delete it forcibly.",
 			 my_cq, cq_num, my_cq->ipz_cq_handle.handle);
 		ehca_error_data(shca, my_cq, my_cq->ipz_cq_handle.handle);
@@ -365,7 +365,7 @@ int ehca_destroy_cq(struct ib_cq *cq)
 				 cq_num);
 	}
 	if (h_ret != H_SUCCESS) {
-		ehca_err(device, "hipz_h_destroy_cq() failed h_ret=%li "
+		ehca_err(device, "hipz_h_destroy_cq() failed h_ret=%lli "
 			 "ehca_cq=%p cq_num=%x", h_ret, my_cq, cq_num);
 		return ehca2ib_return_code(h_ret);
 	}
diff --git a/drivers/infiniband/hw/ehca/ehca_hca.c b/drivers/infiniband/hw/ehca/ehca_hca.c
index 46288220cfb..9209c5332df 100644
--- a/drivers/infiniband/hw/ehca/ehca_hca.c
+++ b/drivers/infiniband/hw/ehca/ehca_hca.c
@@ -393,7 +393,7 @@ int ehca_modify_port(struct ib_device *ibdev,
 	hret = hipz_h_modify_port(shca->ipz_hca_handle, port,
 				  cap, props->init_type, port_modify_mask);
 	if (hret != H_SUCCESS) {
-		ehca_err(&shca->ib_device, "Modify port failed  h_ret=%li",
+		ehca_err(&shca->ib_device, "Modify port failed  h_ret=%lli",
 			 hret);
 		ret = -EINVAL;
 	}
diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c
index 3128a5090db..99bcbd7ffb0 100644
--- a/drivers/infiniband/hw/ehca/ehca_irq.c
+++ b/drivers/infiniband/hw/ehca/ehca_irq.c
@@ -99,7 +99,7 @@ static void print_error_data(struct ehca_shca *shca, void *data,
 			return;
 
 		ehca_err(&shca->ib_device,
-			 "QP 0x%x (resource=%lx) has errors.",
+			 "QP 0x%x (resource=%llx) has errors.",
 			 qp->ib_qp.qp_num, resource);
 		break;
 	}
@@ -108,21 +108,21 @@ static void print_error_data(struct ehca_shca *shca, void *data,
 		struct ehca_cq *cq = (struct ehca_cq *)data;
 
 		ehca_err(&shca->ib_device,
-			 "CQ 0x%x (resource=%lx) has errors.",
+			 "CQ 0x%x (resource=%llx) has errors.",
 			 cq->cq_number, resource);
 		break;
 	}
 	default:
 		ehca_err(&shca->ib_device,
-			 "Unknown error type: %lx on %s.",
+			 "Unknown error type: %llx on %s.",
 			 type, shca->ib_device.name);
 		break;
 	}
 
-	ehca_err(&shca->ib_device, "Error data is available: %lx.", resource);
+	ehca_err(&shca->ib_device, "Error data is available: %llx.", resource);
 	ehca_err(&shca->ib_device, "EHCA ----- error data begin "
 		 "---------------------------------------------------");
-	ehca_dmp(rblock, length, "resource=%lx", resource);
+	ehca_dmp(rblock, length, "resource=%llx", resource);
 	ehca_err(&shca->ib_device, "EHCA ----- error data end "
 		 "----------------------------------------------------");
 
@@ -152,7 +152,7 @@ int ehca_error_data(struct ehca_shca *shca, void *data,
 
 	if (ret == H_R_STATE)
 		ehca_err(&shca->ib_device,
-			 "No error data is available: %lx.", resource);
+			 "No error data is available: %llx.", resource);
 	else if (ret == H_SUCCESS) {
 		int length;
 
@@ -164,7 +164,7 @@ int ehca_error_data(struct ehca_shca *shca, void *data,
 		print_error_data(shca, data, rblock, length);
 	} else
 		ehca_err(&shca->ib_device,
-			 "Error data could not be fetched: %lx", resource);
+			 "Error data could not be fetched: %llx", resource);
 
 	ehca_free_fw_ctrlblock(rblock);
 
@@ -514,7 +514,7 @@ static inline void process_eqe(struct ehca_shca *shca, struct ehca_eqe *eqe)
 	struct ehca_cq *cq;
 
 	eqe_value = eqe->entry;
-	ehca_dbg(&shca->ib_device, "eqe_value=%lx", eqe_value);
+	ehca_dbg(&shca->ib_device, "eqe_value=%llx", eqe_value);
 	if (EHCA_BMASK_GET(EQE_COMPLETION_EVENT, eqe_value)) {
 		ehca_dbg(&shca->ib_device, "Got completion event");
 		token = EHCA_BMASK_GET(EQE_CQ_TOKEN, eqe_value);
@@ -603,7 +603,7 @@ void ehca_process_eq(struct ehca_shca *shca, int is_irq)
 		ret = hipz_h_eoi(eq->ist);
 		if (ret != H_SUCCESS)
 			ehca_err(&shca->ib_device,
-				 "bad return code EOI -rc = %ld\n", ret);
+				 "bad return code EOI -rc = %lld\n", ret);
 		ehca_dbg(&shca->ib_device, "deadman found %x eqe", eqe_cnt);
 	}
 	if (unlikely(eqe_cnt == EHCA_EQE_CACHE_SIZE))
diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index c7b8a506af6..368311ce332 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -304,7 +304,7 @@ static int ehca_sense_attributes(struct ehca_shca *shca)
 
 	h_ret = hipz_h_query_hca(shca->ipz_hca_handle, rblock);
 	if (h_ret != H_SUCCESS) {
-		ehca_gen_err("Cannot query device properties. h_ret=%li",
+		ehca_gen_err("Cannot query device properties. h_ret=%lli",
 			     h_ret);
 		ret = -EPERM;
 		goto sense_attributes1;
@@ -391,7 +391,7 @@ static int ehca_sense_attributes(struct ehca_shca *shca)
 	port = (struct hipz_query_port *)rblock;
 	h_ret = hipz_h_query_port(shca->ipz_hca_handle, 1, port);
 	if (h_ret != H_SUCCESS) {
-		ehca_gen_err("Cannot query port properties. h_ret=%li",
+		ehca_gen_err("Cannot query port properties. h_ret=%lli",
 			     h_ret);
 		ret = -EPERM;
 		goto sense_attributes1;
@@ -682,7 +682,7 @@ static ssize_t ehca_show_adapter_handle(struct device *dev,
 {
 	struct ehca_shca *shca = dev->driver_data;
 
-	return sprintf(buf, "%lx\n", shca->ipz_hca_handle.handle);
+	return sprintf(buf, "%llx\n", shca->ipz_hca_handle.handle);
 
 }
 static DEVICE_ATTR(adapter_handle, S_IRUGO, ehca_show_adapter_handle, NULL);
diff --git a/drivers/infiniband/hw/ehca/ehca_mcast.c b/drivers/infiniband/hw/ehca/ehca_mcast.c
index e3ef0264ccc..120aedf9f98 100644
--- a/drivers/infiniband/hw/ehca/ehca_mcast.c
+++ b/drivers/infiniband/hw/ehca/ehca_mcast.c
@@ -88,7 +88,7 @@ int ehca_attach_mcast(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
 	if (h_ret != H_SUCCESS)
 		ehca_err(ibqp->device,
 			 "ehca_qp=%p qp_num=%x hipz_h_attach_mcqp() failed "
-			 "h_ret=%li", my_qp, ibqp->qp_num, h_ret);
+			 "h_ret=%lli", my_qp, ibqp->qp_num, h_ret);
 
 	return ehca2ib_return_code(h_ret);
 }
@@ -125,7 +125,7 @@ int ehca_detach_mcast(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
 	if (h_ret != H_SUCCESS)
 		ehca_err(ibqp->device,
 			 "ehca_qp=%p qp_num=%x hipz_h_detach_mcqp() failed "
-			 "h_ret=%li", my_qp, ibqp->qp_num, h_ret);
+			 "h_ret=%lli", my_qp, ibqp->qp_num, h_ret);
 
 	return ehca2ib_return_code(h_ret);
 }
diff --git a/drivers/infiniband/hw/ehca/ehca_mrmw.c b/drivers/infiniband/hw/ehca/ehca_mrmw.c
index f974367cad4..72f83f7df61 100644
--- a/drivers/infiniband/hw/ehca/ehca_mrmw.c
+++ b/drivers/infiniband/hw/ehca/ehca_mrmw.c
@@ -204,7 +204,7 @@ struct ib_mr *ehca_reg_phys_mr(struct ib_pd *pd,
 	}
 	if ((size == 0) ||
 	    (((u64)iova_start + size) < (u64)iova_start)) {
-		ehca_err(pd->device, "bad input values: size=%lx iova_start=%p",
+		ehca_err(pd->device, "bad input values: size=%llx iova_start=%p",
 			 size, iova_start);
 		ib_mr = ERR_PTR(-EINVAL);
 		goto reg_phys_mr_exit0;
@@ -309,8 +309,8 @@ struct ib_mr *ehca_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
 	}
 
 	if (length == 0 || virt + length < virt) {
-		ehca_err(pd->device, "bad input values: length=%lx "
-			 "virt_base=%lx", length, virt);
+		ehca_err(pd->device, "bad input values: length=%llx "
+			 "virt_base=%llx", length, virt);
 		ib_mr = ERR_PTR(-EINVAL);
 		goto reg_user_mr_exit0;
 	}
@@ -373,7 +373,7 @@ reg_user_mr_fallback:
 			  &e_mr->ib.ib_mr.rkey);
 	if (ret == -EINVAL && pginfo.hwpage_size > PAGE_SIZE) {
 		ehca_warn(pd->device, "failed to register mr "
-			  "with hwpage_size=%lx", hwpage_size);
+			  "with hwpage_size=%llx", hwpage_size);
 		ehca_info(pd->device, "try to register mr with "
 			  "kpage_size=%lx", PAGE_SIZE);
 		/*
@@ -509,7 +509,7 @@ int ehca_rereg_phys_mr(struct ib_mr *mr,
 			goto rereg_phys_mr_exit1;
 		if ((new_size == 0) ||
 		    (((u64)iova_start + new_size) < (u64)iova_start)) {
-			ehca_err(mr->device, "bad input values: new_size=%lx "
+			ehca_err(mr->device, "bad input values: new_size=%llx "
 				 "iova_start=%p", new_size, iova_start);
 			ret = -EINVAL;
 			goto rereg_phys_mr_exit1;
@@ -580,8 +580,8 @@ int ehca_query_mr(struct ib_mr *mr, struct ib_mr_attr *mr_attr)
 
 	h_ret = hipz_h_query_mr(shca->ipz_hca_handle, e_mr, &hipzout);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(mr->device, "hipz_mr_query failed, h_ret=%li mr=%p "
-			 "hca_hndl=%lx mr_hndl=%lx lkey=%x",
+		ehca_err(mr->device, "hipz_mr_query failed, h_ret=%lli mr=%p "
+			 "hca_hndl=%llx mr_hndl=%llx lkey=%x",
 			 h_ret, mr, shca->ipz_hca_handle.handle,
 			 e_mr->ipz_mr_handle.handle, mr->lkey);
 		ret = ehca2ib_return_code(h_ret);
@@ -630,8 +630,8 @@ int ehca_dereg_mr(struct ib_mr *mr)
 	/* TODO: BUSY: MR still has bound window(s) */
 	h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_mr);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(mr->device, "hipz_free_mr failed, h_ret=%li shca=%p "
-			 "e_mr=%p hca_hndl=%lx mr_hndl=%lx mr->lkey=%x",
+		ehca_err(mr->device, "hipz_free_mr failed, h_ret=%lli shca=%p "
+			 "e_mr=%p hca_hndl=%llx mr_hndl=%llx mr->lkey=%x",
 			 h_ret, shca, e_mr, shca->ipz_hca_handle.handle,
 			 e_mr->ipz_mr_handle.handle, mr->lkey);
 		ret = ehca2ib_return_code(h_ret);
@@ -671,8 +671,8 @@ struct ib_mw *ehca_alloc_mw(struct ib_pd *pd)
 	h_ret = hipz_h_alloc_resource_mw(shca->ipz_hca_handle, e_mw,
 					 e_pd->fw_pd, &hipzout);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(pd->device, "hipz_mw_allocate failed, h_ret=%li "
-			 "shca=%p hca_hndl=%lx mw=%p",
+		ehca_err(pd->device, "hipz_mw_allocate failed, h_ret=%lli "
+			 "shca=%p hca_hndl=%llx mw=%p",
 			 h_ret, shca, shca->ipz_hca_handle.handle, e_mw);
 		ib_mw = ERR_PTR(ehca2ib_return_code(h_ret));
 		goto alloc_mw_exit1;
@@ -713,8 +713,8 @@ int ehca_dealloc_mw(struct ib_mw *mw)
 
 	h_ret = hipz_h_free_resource_mw(shca->ipz_hca_handle, e_mw);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(mw->device, "hipz_free_mw failed, h_ret=%li shca=%p "
-			 "mw=%p rkey=%x hca_hndl=%lx mw_hndl=%lx",
+		ehca_err(mw->device, "hipz_free_mw failed, h_ret=%lli shca=%p "
+			 "mw=%p rkey=%x hca_hndl=%llx mw_hndl=%llx",
 			 h_ret, shca, mw, mw->rkey, shca->ipz_hca_handle.handle,
 			 e_mw->ipz_mw_handle.handle);
 		return ehca2ib_return_code(h_ret);
@@ -840,7 +840,7 @@ int ehca_map_phys_fmr(struct ib_fmr *fmr,
 		goto map_phys_fmr_exit0;
 	if (iova % e_fmr->fmr_page_size) {
 		/* only whole-numbered pages */
-		ehca_err(fmr->device, "bad iova, iova=%lx fmr_page_size=%x",
+		ehca_err(fmr->device, "bad iova, iova=%llx fmr_page_size=%x",
 			 iova, e_fmr->fmr_page_size);
 		ret = -EINVAL;
 		goto map_phys_fmr_exit0;
@@ -878,7 +878,7 @@ int ehca_map_phys_fmr(struct ib_fmr *fmr,
 map_phys_fmr_exit0:
 	if (ret)
 		ehca_err(fmr->device, "ret=%i fmr=%p page_list=%p list_len=%x "
-			 "iova=%lx", ret, fmr, page_list, list_len, iova);
+			 "iova=%llx", ret, fmr, page_list, list_len, iova);
 	return ret;
 } /* end ehca_map_phys_fmr() */
 
@@ -964,8 +964,8 @@ int ehca_dealloc_fmr(struct ib_fmr *fmr)
 
 	h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_fmr);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(fmr->device, "hipz_free_mr failed, h_ret=%li e_fmr=%p "
-			 "hca_hndl=%lx fmr_hndl=%lx fmr->lkey=%x",
+		ehca_err(fmr->device, "hipz_free_mr failed, h_ret=%lli e_fmr=%p "
+			 "hca_hndl=%llx fmr_hndl=%llx fmr->lkey=%x",
 			 h_ret, e_fmr, shca->ipz_hca_handle.handle,
 			 e_fmr->ipz_mr_handle.handle, fmr->lkey);
 		ret = ehca2ib_return_code(h_ret);
@@ -1007,8 +1007,8 @@ int ehca_reg_mr(struct ehca_shca *shca,
 					 (u64)iova_start, size, hipz_acl,
 					 e_pd->fw_pd, &hipzout);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(&shca->ib_device, "hipz_alloc_mr failed, h_ret=%li "
-			 "hca_hndl=%lx", h_ret, shca->ipz_hca_handle.handle);
+		ehca_err(&shca->ib_device, "hipz_alloc_mr failed, h_ret=%lli "
+			 "hca_hndl=%llx", h_ret, shca->ipz_hca_handle.handle);
 		ret = ehca2ib_return_code(h_ret);
 		goto ehca_reg_mr_exit0;
 	}
@@ -1033,9 +1033,9 @@ int ehca_reg_mr(struct ehca_shca *shca,
 ehca_reg_mr_exit1:
 	h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_mr);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(&shca->ib_device, "h_ret=%li shca=%p e_mr=%p "
-			 "iova_start=%p size=%lx acl=%x e_pd=%p lkey=%x "
-			 "pginfo=%p num_kpages=%lx num_hwpages=%lx ret=%i",
+		ehca_err(&shca->ib_device, "h_ret=%lli shca=%p e_mr=%p "
+			 "iova_start=%p size=%llx acl=%x e_pd=%p lkey=%x "
+			 "pginfo=%p num_kpages=%llx num_hwpages=%llx ret=%i",
 			 h_ret, shca, e_mr, iova_start, size, acl, e_pd,
 			 hipzout.lkey, pginfo, pginfo->num_kpages,
 			 pginfo->num_hwpages, ret);
@@ -1045,8 +1045,8 @@ ehca_reg_mr_exit1:
 ehca_reg_mr_exit0:
 	if (ret)
 		ehca_err(&shca->ib_device, "ret=%i shca=%p e_mr=%p "
-			 "iova_start=%p size=%lx acl=%x e_pd=%p pginfo=%p "
-			 "num_kpages=%lx num_hwpages=%lx",
+			 "iova_start=%p size=%llx acl=%x e_pd=%p pginfo=%p "
+			 "num_kpages=%llx num_hwpages=%llx",
 			 ret, shca, e_mr, iova_start, size, acl, e_pd, pginfo,
 			 pginfo->num_kpages, pginfo->num_hwpages);
 	return ret;
@@ -1116,8 +1116,8 @@ int ehca_reg_mr_rpages(struct ehca_shca *shca,
 			 */
 			if (h_ret != H_SUCCESS) {
 				ehca_err(&shca->ib_device, "last "
-					 "hipz_reg_rpage_mr failed, h_ret=%li "
-					 "e_mr=%p i=%x hca_hndl=%lx mr_hndl=%lx"
+					 "hipz_reg_rpage_mr failed, h_ret=%lli "
+					 "e_mr=%p i=%x hca_hndl=%llx mr_hndl=%llx"
 					 " lkey=%x", h_ret, e_mr, i,
 					 shca->ipz_hca_handle.handle,
 					 e_mr->ipz_mr_handle.handle,
@@ -1128,8 +1128,8 @@ int ehca_reg_mr_rpages(struct ehca_shca *shca,
 				ret = 0;
 		} else if (h_ret != H_PAGE_REGISTERED) {
 			ehca_err(&shca->ib_device, "hipz_reg_rpage_mr failed, "
-				 "h_ret=%li e_mr=%p i=%x lkey=%x hca_hndl=%lx "
-				 "mr_hndl=%lx", h_ret, e_mr, i,
+				 "h_ret=%lli e_mr=%p i=%x lkey=%x hca_hndl=%llx "
+				 "mr_hndl=%llx", h_ret, e_mr, i,
 				 e_mr->ib.ib_mr.lkey,
 				 shca->ipz_hca_handle.handle,
 				 e_mr->ipz_mr_handle.handle);
@@ -1145,7 +1145,7 @@ ehca_reg_mr_rpages_exit1:
 ehca_reg_mr_rpages_exit0:
 	if (ret)
 		ehca_err(&shca->ib_device, "ret=%i shca=%p e_mr=%p pginfo=%p "
-			 "num_kpages=%lx num_hwpages=%lx", ret, shca, e_mr,
+			 "num_kpages=%llx num_hwpages=%llx", ret, shca, e_mr,
 			 pginfo, pginfo->num_kpages, pginfo->num_hwpages);
 	return ret;
 } /* end ehca_reg_mr_rpages() */
@@ -1184,7 +1184,7 @@ inline int ehca_rereg_mr_rereg1(struct ehca_shca *shca,
 	ret = ehca_set_pagebuf(pginfo, pginfo->num_hwpages, kpage);
 	if (ret) {
 		ehca_err(&shca->ib_device, "set pagebuf failed, e_mr=%p "
-			 "pginfo=%p type=%x num_kpages=%lx num_hwpages=%lx "
+			 "pginfo=%p type=%x num_kpages=%llx num_hwpages=%llx "
 			 "kpage=%p", e_mr, pginfo, pginfo->type,
 			 pginfo->num_kpages, pginfo->num_hwpages, kpage);
 		goto ehca_rereg_mr_rereg1_exit1;
@@ -1205,13 +1205,13 @@ inline int ehca_rereg_mr_rereg1(struct ehca_shca *shca,
 		 * (MW bound or MR is shared)
 		 */
 		ehca_warn(&shca->ib_device, "hipz_h_reregister_pmr failed "
-			  "(Rereg1), h_ret=%li e_mr=%p", h_ret, e_mr);
+			  "(Rereg1), h_ret=%lli e_mr=%p", h_ret, e_mr);
 		*pginfo = pginfo_save;
 		ret = -EAGAIN;
 	} else if ((u64 *)hipzout.vaddr != iova_start) {
 		ehca_err(&shca->ib_device, "PHYP changed iova_start in "
-			 "rereg_pmr, iova_start=%p iova_start_out=%lx e_mr=%p "
-			 "mr_handle=%lx lkey=%x lkey_out=%x", iova_start,
+			 "rereg_pmr, iova_start=%p iova_start_out=%llx e_mr=%p "
+			 "mr_handle=%llx lkey=%x lkey_out=%x", iova_start,
 			 hipzout.vaddr, e_mr, e_mr->ipz_mr_handle.handle,
 			 e_mr->ib.ib_mr.lkey, hipzout.lkey);
 		ret = -EFAULT;
@@ -1235,7 +1235,7 @@ ehca_rereg_mr_rereg1_exit1:
 ehca_rereg_mr_rereg1_exit0:
 	if ( ret && (ret != -EAGAIN) )
 		ehca_err(&shca->ib_device, "ret=%i lkey=%x rkey=%x "
-			 "pginfo=%p num_kpages=%lx num_hwpages=%lx",
+			 "pginfo=%p num_kpages=%llx num_hwpages=%llx",
 			 ret, *lkey, *rkey, pginfo, pginfo->num_kpages,
 			 pginfo->num_hwpages);
 	return ret;
@@ -1263,7 +1263,7 @@ int ehca_rereg_mr(struct ehca_shca *shca,
 	    (e_mr->num_hwpages > MAX_RPAGES) ||
 	    (pginfo->num_hwpages > e_mr->num_hwpages)) {
 		ehca_dbg(&shca->ib_device, "Rereg3 case, "
-			 "pginfo->num_hwpages=%lx e_mr->num_hwpages=%x",
+			 "pginfo->num_hwpages=%llx e_mr->num_hwpages=%x",
 			 pginfo->num_hwpages, e_mr->num_hwpages);
 		rereg_1_hcall = 0;
 		rereg_3_hcall = 1;
@@ -1295,7 +1295,7 @@ int ehca_rereg_mr(struct ehca_shca *shca,
 		h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_mr);
 		if (h_ret != H_SUCCESS) {
 			ehca_err(&shca->ib_device, "hipz_free_mr failed, "
-				 "h_ret=%li e_mr=%p hca_hndl=%lx mr_hndl=%lx "
+				 "h_ret=%lli e_mr=%p hca_hndl=%llx mr_hndl=%llx "
 				 "mr->lkey=%x",
 				 h_ret, e_mr, shca->ipz_hca_handle.handle,
 				 e_mr->ipz_mr_handle.handle,
@@ -1328,8 +1328,8 @@ int ehca_rereg_mr(struct ehca_shca *shca,
 ehca_rereg_mr_exit0:
 	if (ret)
 		ehca_err(&shca->ib_device, "ret=%i shca=%p e_mr=%p "
-			 "iova_start=%p size=%lx acl=%x e_pd=%p pginfo=%p "
-			 "num_kpages=%lx lkey=%x rkey=%x rereg_1_hcall=%x "
+			 "iova_start=%p size=%llx acl=%x e_pd=%p pginfo=%p "
+			 "num_kpages=%llx lkey=%x rkey=%x rereg_1_hcall=%x "
 			 "rereg_3_hcall=%x", ret, shca, e_mr, iova_start, size,
 			 acl, e_pd, pginfo, pginfo->num_kpages, *lkey, *rkey,
 			 rereg_1_hcall, rereg_3_hcall);
@@ -1371,8 +1371,8 @@ int ehca_unmap_one_fmr(struct ehca_shca *shca,
 		 * FMRs are not shared and no MW bound to FMRs
 		 */
 		ehca_err(&shca->ib_device, "hipz_reregister_pmr failed "
-			 "(Rereg1), h_ret=%li e_fmr=%p hca_hndl=%lx "
-			 "mr_hndl=%lx lkey=%x lkey_out=%x",
+			 "(Rereg1), h_ret=%lli e_fmr=%p hca_hndl=%llx "
+			 "mr_hndl=%llx lkey=%x lkey_out=%x",
 			 h_ret, e_fmr, shca->ipz_hca_handle.handle,
 			 e_fmr->ipz_mr_handle.handle,
 			 e_fmr->ib.ib_fmr.lkey, hipzout.lkey);
@@ -1383,7 +1383,7 @@ int ehca_unmap_one_fmr(struct ehca_shca *shca,
 	h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_fmr);
 	if (h_ret != H_SUCCESS) {
 		ehca_err(&shca->ib_device, "hipz_free_mr failed, "
-			 "h_ret=%li e_fmr=%p hca_hndl=%lx mr_hndl=%lx "
+			 "h_ret=%lli e_fmr=%p hca_hndl=%llx mr_hndl=%llx "
 			 "lkey=%x",
 			 h_ret, e_fmr, shca->ipz_hca_handle.handle,
 			 e_fmr->ipz_mr_handle.handle,
@@ -1447,9 +1447,9 @@ int ehca_reg_smr(struct ehca_shca *shca,
 				    (u64)iova_start, hipz_acl, e_pd->fw_pd,
 				    &hipzout);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%li "
+		ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%lli "
 			 "shca=%p e_origmr=%p e_newmr=%p iova_start=%p acl=%x "
-			 "e_pd=%p hca_hndl=%lx mr_hndl=%lx lkey=%x",
+			 "e_pd=%p hca_hndl=%llx mr_hndl=%llx lkey=%x",
 			 h_ret, shca, e_origmr, e_newmr, iova_start, acl, e_pd,
 			 shca->ipz_hca_handle.handle,
 			 e_origmr->ipz_mr_handle.handle,
@@ -1527,7 +1527,7 @@ int ehca_reg_internal_maxmr(
 			  &e_mr->ib.ib_mr.rkey);
 	if (ret) {
 		ehca_err(&shca->ib_device, "reg of internal max MR failed, "
-			 "e_mr=%p iova_start=%p size_maxmr=%lx num_kpages=%x "
+			 "e_mr=%p iova_start=%p size_maxmr=%llx num_kpages=%x "
 			 "num_hwpages=%x", e_mr, iova_start, size_maxmr,
 			 num_kpages, num_hwpages);
 		goto ehca_reg_internal_maxmr_exit1;
@@ -1573,8 +1573,8 @@ int ehca_reg_maxmr(struct ehca_shca *shca,
 				    (u64)iova_start, hipz_acl, e_pd->fw_pd,
 				    &hipzout);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%li "
-			 "e_origmr=%p hca_hndl=%lx mr_hndl=%lx lkey=%x",
+		ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%lli "
+			 "e_origmr=%p hca_hndl=%llx mr_hndl=%llx lkey=%x",
 			 h_ret, e_origmr, shca->ipz_hca_handle.handle,
 			 e_origmr->ipz_mr_handle.handle,
 			 e_origmr->ib.ib_mr.lkey);
@@ -1651,28 +1651,28 @@ int ehca_mr_chk_buf_and_calc_size(struct ib_phys_buf *phys_buf_array,
 	/* check first buffer */
 	if (((u64)iova_start & ~PAGE_MASK) != (pbuf->addr & ~PAGE_MASK)) {
 		ehca_gen_err("iova_start/addr mismatch, iova_start=%p "
-			     "pbuf->addr=%lx pbuf->size=%lx",
+			     "pbuf->addr=%llx pbuf->size=%llx",
 			     iova_start, pbuf->addr, pbuf->size);
 		return -EINVAL;
 	}
 	if (((pbuf->addr + pbuf->size) % PAGE_SIZE) &&
 	    (num_phys_buf > 1)) {
-		ehca_gen_err("addr/size mismatch in 1st buf, pbuf->addr=%lx "
-			     "pbuf->size=%lx", pbuf->addr, pbuf->size);
+		ehca_gen_err("addr/size mismatch in 1st buf, pbuf->addr=%llx "
+			     "pbuf->size=%llx", pbuf->addr, pbuf->size);
 		return -EINVAL;
 	}
 
 	for (i = 0; i < num_phys_buf; i++) {
 		if ((i > 0) && (pbuf->addr % PAGE_SIZE)) {
-			ehca_gen_err("bad address, i=%x pbuf->addr=%lx "
-				     "pbuf->size=%lx",
+			ehca_gen_err("bad address, i=%x pbuf->addr=%llx "
+				     "pbuf->size=%llx",
 				     i, pbuf->addr, pbuf->size);
 			return -EINVAL;
 		}
 		if (((i > 0) &&	/* not 1st */
 		     (i < (num_phys_buf - 1)) &&	/* not last */
 		     (pbuf->size % PAGE_SIZE)) || (pbuf->size == 0)) {
-			ehca_gen_err("bad size, i=%x pbuf->size=%lx",
+			ehca_gen_err("bad size, i=%x pbuf->size=%llx",
 				     i, pbuf->size);
 			return -EINVAL;
 		}
@@ -1705,7 +1705,7 @@ int ehca_fmr_check_page_list(struct ehca_mr *e_fmr,
 	page = page_list;
 	for (i = 0; i < list_len; i++) {
 		if (*page % e_fmr->fmr_page_size) {
-			ehca_gen_err("bad page, i=%x *page=%lx page=%p fmr=%p "
+			ehca_gen_err("bad page, i=%x *page=%llx page=%p fmr=%p "
 				     "fmr_page_size=%x", i, *page, page, e_fmr,
 				     e_fmr->fmr_page_size);
 			return -EINVAL;
@@ -1743,9 +1743,9 @@ static int ehca_set_pagebuf_user1(struct ehca_mr_pginfo *pginfo,
 					     (pginfo->next_hwpage *
 					      pginfo->hwpage_size));
 			if ( !(*kpage) ) {
-				ehca_gen_err("pgaddr=%lx "
-					     "chunk->page_list[i]=%lx "
-					     "i=%x next_hwpage=%lx",
+				ehca_gen_err("pgaddr=%llx "
+					     "chunk->page_list[i]=%llx "
+					     "i=%x next_hwpage=%llx",
 					     pgaddr, (u64)sg_dma_address(
 						     &chunk->page_list[i]),
 					     i, pginfo->next_hwpage);
@@ -1795,11 +1795,11 @@ static int ehca_check_kpages_per_ate(struct scatterlist *page_list,
 	for (t = start_idx; t <= end_idx; t++) {
 		u64 pgaddr = page_to_pfn(sg_page(&page_list[t])) << PAGE_SHIFT;
 		if (ehca_debug_level >= 3)
-			ehca_gen_dbg("chunk_page=%lx value=%016lx", pgaddr,
+			ehca_gen_dbg("chunk_page=%llx value=%016llx", pgaddr,
 				     *(u64 *)abs_to_virt(phys_to_abs(pgaddr)));
 		if (pgaddr - PAGE_SIZE != *prev_pgaddr) {
-			ehca_gen_err("uncontiguous page found pgaddr=%lx "
-				     "prev_pgaddr=%lx page_list_i=%x",
+			ehca_gen_err("uncontiguous page found pgaddr=%llx "
+				     "prev_pgaddr=%llx page_list_i=%x",
 				     pgaddr, *prev_pgaddr, t);
 			return -EINVAL;
 		}
@@ -1833,7 +1833,7 @@ static int ehca_set_pagebuf_user2(struct ehca_mr_pginfo *pginfo,
 					   << PAGE_SHIFT );
 				*kpage = phys_to_abs(pgaddr);
 				if ( !(*kpage) ) {
-					ehca_gen_err("pgaddr=%lx i=%x",
+					ehca_gen_err("pgaddr=%llx i=%x",
 						     pgaddr, i);
 					ret = -EFAULT;
 					return ret;
@@ -1846,8 +1846,8 @@ static int ehca_set_pagebuf_user2(struct ehca_mr_pginfo *pginfo,
 					if (pginfo->hwpage_cnt) {
 						ehca_gen_err(
 							"invalid alignment "
-							"pgaddr=%lx i=%x "
-							"mr_pgsize=%lx",
+							"pgaddr=%llx i=%x "
+							"mr_pgsize=%llx",
 							pgaddr, i,
 							pginfo->hwpage_size);
 						ret = -EFAULT;
@@ -1866,8 +1866,8 @@ static int ehca_set_pagebuf_user2(struct ehca_mr_pginfo *pginfo,
 				if (ehca_debug_level >= 3) {
 					u64 val = *(u64 *)abs_to_virt(
 						phys_to_abs(pgaddr));
-					ehca_gen_dbg("kpage=%lx chunk_page=%lx "
-						     "value=%016lx",
+					ehca_gen_dbg("kpage=%llx chunk_page=%llx "
+						     "value=%016llx",
 						     *kpage, pgaddr, val);
 				}
 				prev_pgaddr = pgaddr;
@@ -1944,9 +1944,9 @@ static int ehca_set_pagebuf_phys(struct ehca_mr_pginfo *pginfo,
 			if ((pginfo->kpage_cnt >= pginfo->num_kpages) ||
 			    (pginfo->hwpage_cnt >= pginfo->num_hwpages)) {
 				ehca_gen_err("kpage_cnt >= num_kpages, "
-					     "kpage_cnt=%lx num_kpages=%lx "
-					     "hwpage_cnt=%lx "
-					     "num_hwpages=%lx i=%x",
+					     "kpage_cnt=%llx num_kpages=%llx "
+					     "hwpage_cnt=%llx "
+					     "num_hwpages=%llx i=%x",
 					     pginfo->kpage_cnt,
 					     pginfo->num_kpages,
 					     pginfo->hwpage_cnt,
@@ -1957,8 +1957,8 @@ static int ehca_set_pagebuf_phys(struct ehca_mr_pginfo *pginfo,
 				(pbuf->addr & ~(pginfo->hwpage_size - 1)) +
 				(pginfo->next_hwpage * pginfo->hwpage_size));
 			if ( !(*kpage) && pbuf->addr ) {
-				ehca_gen_err("pbuf->addr=%lx pbuf->size=%lx "
-					     "next_hwpage=%lx", pbuf->addr,
+				ehca_gen_err("pbuf->addr=%llx pbuf->size=%llx "
+					     "next_hwpage=%llx", pbuf->addr,
 					     pbuf->size, pginfo->next_hwpage);
 				return -EFAULT;
 			}
@@ -1996,8 +1996,8 @@ static int ehca_set_pagebuf_fmr(struct ehca_mr_pginfo *pginfo,
 		*kpage = phys_to_abs((*fmrlist & ~(pginfo->hwpage_size - 1)) +
 				     pginfo->next_hwpage * pginfo->hwpage_size);
 		if ( !(*kpage) ) {
-			ehca_gen_err("*fmrlist=%lx fmrlist=%p "
-				     "next_listelem=%lx next_hwpage=%lx",
+			ehca_gen_err("*fmrlist=%llx fmrlist=%p "
+				     "next_listelem=%llx next_hwpage=%llx",
 				     *fmrlist, fmrlist,
 				     pginfo->u.fmr.next_listelem,
 				     pginfo->next_hwpage);
@@ -2025,7 +2025,7 @@ static int ehca_set_pagebuf_fmr(struct ehca_mr_pginfo *pginfo,
 						    ~(pginfo->hwpage_size - 1));
 				if (prev + pginfo->u.fmr.fmr_pgsize != p) {
 					ehca_gen_err("uncontiguous fmr pages "
-						     "found prev=%lx p=%lx "
+						     "found prev=%llx p=%llx "
 						     "idx=%x", prev, p, i + j);
 					return -EINVAL;
 				}
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index f161cf173db..00c10815971 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -331,7 +331,7 @@ static inline int init_qp_queue(struct ehca_shca *shca,
 		if (cnt == (nr_q_pages - 1)) {	/* last page! */
 			if (h_ret != expected_hret) {
 				ehca_err(ib_dev, "hipz_qp_register_rpage() "
-					 "h_ret=%li", h_ret);
+					 "h_ret=%lli", h_ret);
 				ret = ehca2ib_return_code(h_ret);
 				goto init_qp_queue1;
 			}
@@ -345,7 +345,7 @@ static inline int init_qp_queue(struct ehca_shca *shca,
 		} else {
 			if (h_ret != H_PAGE_REGISTERED) {
 				ehca_err(ib_dev, "hipz_qp_register_rpage() "
-					 "h_ret=%li", h_ret);
+					 "h_ret=%lli", h_ret);
 				ret = ehca2ib_return_code(h_ret);
 				goto init_qp_queue1;
 			}
@@ -709,7 +709,7 @@ static struct ehca_qp *internal_create_qp(
 
 	h_ret = hipz_h_alloc_resource_qp(shca->ipz_hca_handle, &parms);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(pd->device, "h_alloc_resource_qp() failed h_ret=%li",
+		ehca_err(pd->device, "h_alloc_resource_qp() failed h_ret=%lli",
 			 h_ret);
 		ret = ehca2ib_return_code(h_ret);
 		goto create_qp_exit1;
@@ -1010,7 +1010,7 @@ struct ib_srq *ehca_create_srq(struct ib_pd *pd,
 				mqpcb, my_qp->galpas.kernel);
 	if (hret != H_SUCCESS) {
 		ehca_err(pd->device, "Could not modify SRQ to INIT "
-			 "ehca_qp=%p qp_num=%x h_ret=%li",
+			 "ehca_qp=%p qp_num=%x h_ret=%lli",
 			 my_qp, my_qp->real_qp_num, hret);
 		goto create_srq2;
 	}
@@ -1024,7 +1024,7 @@ struct ib_srq *ehca_create_srq(struct ib_pd *pd,
 				mqpcb, my_qp->galpas.kernel);
 	if (hret != H_SUCCESS) {
 		ehca_err(pd->device, "Could not enable SRQ "
-			 "ehca_qp=%p qp_num=%x h_ret=%li",
+			 "ehca_qp=%p qp_num=%x h_ret=%lli",
 			 my_qp, my_qp->real_qp_num, hret);
 		goto create_srq2;
 	}
@@ -1038,7 +1038,7 @@ struct ib_srq *ehca_create_srq(struct ib_pd *pd,
 				mqpcb, my_qp->galpas.kernel);
 	if (hret != H_SUCCESS) {
 		ehca_err(pd->device, "Could not modify SRQ to RTR "
-			 "ehca_qp=%p qp_num=%x h_ret=%li",
+			 "ehca_qp=%p qp_num=%x h_ret=%lli",
 			 my_qp, my_qp->real_qp_num, hret);
 		goto create_srq2;
 	}
@@ -1078,7 +1078,7 @@ static int prepare_sqe_rts(struct ehca_qp *my_qp, struct ehca_shca *shca,
 					   &bad_send_wqe_p, NULL, 2);
 	if (h_ret != H_SUCCESS) {
 		ehca_err(&shca->ib_device, "hipz_h_disable_and_get_wqe() failed"
-			 " ehca_qp=%p qp_num=%x h_ret=%li",
+			 " ehca_qp=%p qp_num=%x h_ret=%lli",
 			 my_qp, qp_num, h_ret);
 		return ehca2ib_return_code(h_ret);
 	}
@@ -1134,7 +1134,7 @@ static int calc_left_cqes(u64 wqe_p, struct ipz_queue *ipz_queue,
 
 	if (ipz_queue_abs_to_offset(ipz_queue, wqe_p, &q_ofs)) {
 		ehca_gen_err("Invalid offset for calculating left cqes "
-				"wqe_p=%#lx wqe_v=%p\n", wqe_p, wqe_v);
+				"wqe_p=%#llx wqe_v=%p\n", wqe_p, wqe_v);
 		return -EFAULT;
 	}
 
@@ -1168,7 +1168,7 @@ static int check_for_left_cqes(struct ehca_qp *my_qp, struct ehca_shca *shca)
 				&send_wqe_p, &recv_wqe_p, 4);
 		if (h_ret != H_SUCCESS) {
 			ehca_err(&shca->ib_device, "disable_and_get_wqe() "
-				 "failed ehca_qp=%p qp_num=%x h_ret=%li",
+				 "failed ehca_qp=%p qp_num=%x h_ret=%lli",
 				 my_qp, qp_num, h_ret);
 			return ehca2ib_return_code(h_ret);
 		}
@@ -1261,7 +1261,7 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 				mqpcb, my_qp->galpas.kernel);
 	if (h_ret != H_SUCCESS) {
 		ehca_err(ibqp->device, "hipz_h_query_qp() failed "
-			 "ehca_qp=%p qp_num=%x h_ret=%li",
+			 "ehca_qp=%p qp_num=%x h_ret=%lli",
 			 my_qp, ibqp->qp_num, h_ret);
 		ret = ehca2ib_return_code(h_ret);
 		goto modify_qp_exit1;
@@ -1690,7 +1690,7 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 
 	if (h_ret != H_SUCCESS) {
 		ret = ehca2ib_return_code(h_ret);
-		ehca_err(ibqp->device, "hipz_h_modify_qp() failed h_ret=%li "
+		ehca_err(ibqp->device, "hipz_h_modify_qp() failed h_ret=%lli "
 			 "ehca_qp=%p qp_num=%x", h_ret, my_qp, ibqp->qp_num);
 		goto modify_qp_exit2;
 	}
@@ -1723,7 +1723,7 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 			ret = ehca2ib_return_code(h_ret);
 			ehca_err(ibqp->device, "ENABLE in context of "
 				 "RESET_2_INIT failed! Maybe you didn't get "
-				 "a LID h_ret=%li ehca_qp=%p qp_num=%x",
+				 "a LID h_ret=%lli ehca_qp=%p qp_num=%x",
 				 h_ret, my_qp, ibqp->qp_num);
 			goto modify_qp_exit2;
 		}
@@ -1909,7 +1909,7 @@ int ehca_query_qp(struct ib_qp *qp,
 	if (h_ret != H_SUCCESS) {
 		ret = ehca2ib_return_code(h_ret);
 		ehca_err(qp->device, "hipz_h_query_qp() failed "
-			 "ehca_qp=%p qp_num=%x h_ret=%li",
+			 "ehca_qp=%p qp_num=%x h_ret=%lli",
 			 my_qp, qp->qp_num, h_ret);
 		goto query_qp_exit1;
 	}
@@ -2074,7 +2074,7 @@ int ehca_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr,
 
 	if (h_ret != H_SUCCESS) {
 		ret = ehca2ib_return_code(h_ret);
-		ehca_err(ibsrq->device, "hipz_h_modify_qp() failed h_ret=%li "
+		ehca_err(ibsrq->device, "hipz_h_modify_qp() failed h_ret=%lli "
 			 "ehca_qp=%p qp_num=%x",
 			 h_ret, my_qp, my_qp->real_qp_num);
 	}
@@ -2108,7 +2108,7 @@ int ehca_query_srq(struct ib_srq *srq, struct ib_srq_attr *srq_attr)
 	if (h_ret != H_SUCCESS) {
 		ret = ehca2ib_return_code(h_ret);
 		ehca_err(srq->device, "hipz_h_query_qp() failed "
-			 "ehca_qp=%p qp_num=%x h_ret=%li",
+			 "ehca_qp=%p qp_num=%x h_ret=%lli",
 			 my_qp, my_qp->real_qp_num, h_ret);
 		goto query_srq_exit1;
 	}
@@ -2179,7 +2179,7 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp,
 
 	h_ret = hipz_h_destroy_qp(shca->ipz_hca_handle, my_qp);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(dev, "hipz_h_destroy_qp() failed h_ret=%li "
+		ehca_err(dev, "hipz_h_destroy_qp() failed h_ret=%lli "
 			 "ehca_qp=%p qp_num=%x", h_ret, my_qp, qp_num);
 		return ehca2ib_return_code(h_ret);
 	}
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index c7112686782..5a3d96f84c7 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -822,7 +822,7 @@ static int generate_flush_cqes(struct ehca_qp *my_qp, struct ib_cq *cq,
 		offset = qmap->next_wqe_idx * ipz_queue->qe_size;
 		wqe = (struct ehca_wqe *)ipz_qeit_calc(ipz_queue, offset);
 		if (!wqe) {
-			ehca_err(cq->device, "Invalid wqe offset=%#lx on "
+			ehca_err(cq->device, "Invalid wqe offset=%#llx on "
 				 "qp_num=%#x", offset, my_qp->real_qp_num);
 			return nr;
 		}
diff --git a/drivers/infiniband/hw/ehca/ehca_sqp.c b/drivers/infiniband/hw/ehca/ehca_sqp.c
index 706d97ad555..44447aaa550 100644
--- a/drivers/infiniband/hw/ehca/ehca_sqp.c
+++ b/drivers/infiniband/hw/ehca/ehca_sqp.c
@@ -85,7 +85,7 @@ u64 ehca_define_sqp(struct ehca_shca *shca,
 
 		if (ret != H_SUCCESS) {
 			ehca_err(&shca->ib_device,
-				 "Can't define AQP1 for port %x. h_ret=%li",
+				 "Can't define AQP1 for port %x. h_ret=%lli",
 				 port, ret);
 			return ret;
 		}
diff --git a/drivers/infiniband/hw/ehca/ehca_tools.h b/drivers/infiniband/hw/ehca/ehca_tools.h
index 21f7d06f14a..f09914cccf5 100644
--- a/drivers/infiniband/hw/ehca/ehca_tools.h
+++ b/drivers/infiniband/hw/ehca/ehca_tools.h
@@ -116,7 +116,7 @@ extern int ehca_debug_level;
 		unsigned char *deb = (unsigned char *)(adr); \
 		for (x = 0; x < l; x += 16) { \
 			printk(KERN_INFO "EHCA_DMP:%s " format \
-			       " adr=%p ofs=%04x %016lx %016lx\n", \
+			       " adr=%p ofs=%04x %016llx %016llx\n", \
 			       __func__, ##args, deb, x, \
 			       *((u64 *)&deb[0]), *((u64 *)&deb[8])); \
 			deb += 16; \
diff --git a/drivers/infiniband/hw/ehca/ehca_uverbs.c b/drivers/infiniband/hw/ehca/ehca_uverbs.c
index e43ed8f8a0c..3cb688d2913 100644
--- a/drivers/infiniband/hw/ehca/ehca_uverbs.c
+++ b/drivers/infiniband/hw/ehca/ehca_uverbs.c
@@ -114,7 +114,7 @@ static int ehca_mmap_fw(struct vm_area_struct *vma, struct h_galpas *galpas,
 
 	physical = galpas->user.fw_handle;
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-	ehca_gen_dbg("vsize=%lx physical=%lx", vsize, physical);
+	ehca_gen_dbg("vsize=%llx physical=%llx", vsize, physical);
 	/* VM_IO | VM_RESERVED are set by remap_pfn_range() */
 	ret = remap_4k_pfn(vma, vma->vm_start, physical >> EHCA_PAGESHIFT,
 			   vma->vm_page_prot);
diff --git a/drivers/infiniband/hw/ehca/hcp_if.c b/drivers/infiniband/hw/ehca/hcp_if.c
index 415d3a465de..d0ab0c0d5e9 100644
--- a/drivers/infiniband/hw/ehca/hcp_if.c
+++ b/drivers/infiniband/hw/ehca/hcp_if.c
@@ -226,7 +226,7 @@ u64 hipz_h_alloc_resource_eq(const struct ipz_adapter_handle adapter_handle,
 			     u32 *eq_ist)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 	u64 allocate_controls;
 
 	/* resource type */
@@ -249,7 +249,7 @@ u64 hipz_h_alloc_resource_eq(const struct ipz_adapter_handle adapter_handle,
 	*eq_ist = (u32)outs[5];
 
 	if (ret == H_NOT_ENOUGH_RESOURCES)
-		ehca_gen_err("Not enough resource - ret=%li ", ret);
+		ehca_gen_err("Not enough resource - ret=%lli ", ret);
 
 	return ret;
 }
@@ -270,7 +270,7 @@ u64 hipz_h_alloc_resource_cq(const struct ipz_adapter_handle adapter_handle,
 			     struct ehca_alloc_cq_parms *param)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_ALLOC_RESOURCE, outs,
 				adapter_handle.handle,   /* r4  */
@@ -287,7 +287,7 @@ u64 hipz_h_alloc_resource_cq(const struct ipz_adapter_handle adapter_handle,
 		hcp_galpas_ctor(&cq->galpas, outs[5], outs[6]);
 
 	if (ret == H_NOT_ENOUGH_RESOURCES)
-		ehca_gen_err("Not enough resources. ret=%li", ret);
+		ehca_gen_err("Not enough resources. ret=%lli", ret);
 
 	return ret;
 }
@@ -297,7 +297,7 @@ u64 hipz_h_alloc_resource_qp(const struct ipz_adapter_handle adapter_handle,
 {
 	u64 ret;
 	u64 allocate_controls, max_r10_reg, r11, r12;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	allocate_controls =
 		EHCA_BMASK_SET(H_ALL_RES_QP_ENHANCED_OPS, parms->ext_type)
@@ -362,7 +362,7 @@ u64 hipz_h_alloc_resource_qp(const struct ipz_adapter_handle adapter_handle,
 		hcp_galpas_ctor(&parms->galpas, outs[6], outs[6]);
 
 	if (ret == H_NOT_ENOUGH_RESOURCES)
-		ehca_gen_err("Not enough resources. ret=%li", ret);
+		ehca_gen_err("Not enough resources. ret=%lli", ret);
 
 	return ret;
 }
@@ -454,7 +454,7 @@ u64 hipz_h_register_rpage_eq(const struct ipz_adapter_handle adapter_handle,
 			     const u64 count)
 {
 	if (count != 1) {
-		ehca_gen_err("Ppage counter=%lx", count);
+		ehca_gen_err("Ppage counter=%llx", count);
 		return H_PARAMETER;
 	}
 	return hipz_h_register_rpage(adapter_handle,
@@ -489,7 +489,7 @@ u64 hipz_h_register_rpage_cq(const struct ipz_adapter_handle adapter_handle,
 			     const struct h_galpa gal)
 {
 	if (count != 1) {
-		ehca_gen_err("Page counter=%lx", count);
+		ehca_gen_err("Page counter=%llx", count);
 		return H_PARAMETER;
 	}
 
@@ -508,7 +508,7 @@ u64 hipz_h_register_rpage_qp(const struct ipz_adapter_handle adapter_handle,
 			     const struct h_galpa galpa)
 {
 	if (count > 1) {
-		ehca_gen_err("Page counter=%lx", count);
+		ehca_gen_err("Page counter=%llx", count);
 		return H_PARAMETER;
 	}
 
@@ -525,7 +525,7 @@ u64 hipz_h_disable_and_get_wqe(const struct ipz_adapter_handle adapter_handle,
 			       int dis_and_get_function_code)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_DISABLE_AND_GETC, outs,
 				adapter_handle.handle,     /* r4 */
@@ -548,7 +548,7 @@ u64 hipz_h_modify_qp(const struct ipz_adapter_handle adapter_handle,
 		     struct h_galpa gal)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 	ret = ehca_plpar_hcall9(H_MODIFY_QP, outs,
 				adapter_handle.handle, /* r4 */
 				qp_handle.handle,      /* r5 */
@@ -557,7 +557,7 @@ u64 hipz_h_modify_qp(const struct ipz_adapter_handle adapter_handle,
 				0, 0, 0, 0, 0);
 
 	if (ret == H_NOT_ENOUGH_RESOURCES)
-		ehca_gen_err("Insufficient resources ret=%li", ret);
+		ehca_gen_err("Insufficient resources ret=%lli", ret);
 
 	return ret;
 }
@@ -579,7 +579,7 @@ u64 hipz_h_destroy_qp(const struct ipz_adapter_handle adapter_handle,
 		      struct ehca_qp *qp)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = hcp_galpas_dtor(&qp->galpas);
 	if (ret) {
@@ -593,7 +593,7 @@ u64 hipz_h_destroy_qp(const struct ipz_adapter_handle adapter_handle,
 				qp->ipz_qp_handle.handle,  /* r6 */
 				0, 0, 0, 0, 0, 0);
 	if (ret == H_HARDWARE)
-		ehca_gen_err("HCA not operational. ret=%li", ret);
+		ehca_gen_err("HCA not operational. ret=%lli", ret);
 
 	ret = ehca_plpar_hcall_norets(H_FREE_RESOURCE,
 				      adapter_handle.handle,     /* r4 */
@@ -601,7 +601,7 @@ u64 hipz_h_destroy_qp(const struct ipz_adapter_handle adapter_handle,
 				      0, 0, 0, 0, 0);
 
 	if (ret == H_RESOURCE)
-		ehca_gen_err("Resource still in use. ret=%li", ret);
+		ehca_gen_err("Resource still in use. ret=%lli", ret);
 
 	return ret;
 }
@@ -625,7 +625,7 @@ u64 hipz_h_define_aqp1(const struct ipz_adapter_handle adapter_handle,
 		       u32 * bma_qp_nr)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_DEFINE_AQP1, outs,
 				adapter_handle.handle, /* r4 */
@@ -636,7 +636,7 @@ u64 hipz_h_define_aqp1(const struct ipz_adapter_handle adapter_handle,
 	*bma_qp_nr = (u32)outs[1];
 
 	if (ret == H_ALIAS_EXIST)
-		ehca_gen_err("AQP1 already exists. ret=%li", ret);
+		ehca_gen_err("AQP1 already exists. ret=%lli", ret);
 
 	return ret;
 }
@@ -658,7 +658,7 @@ u64 hipz_h_attach_mcqp(const struct ipz_adapter_handle adapter_handle,
 				      0, 0);
 
 	if (ret == H_NOT_ENOUGH_RESOURCES)
-		ehca_gen_err("Not enough resources. ret=%li", ret);
+		ehca_gen_err("Not enough resources. ret=%lli", ret);
 
 	return ret;
 }
@@ -697,7 +697,7 @@ u64 hipz_h_destroy_cq(const struct ipz_adapter_handle adapter_handle,
 				      0, 0, 0, 0);
 
 	if (ret == H_RESOURCE)
-		ehca_gen_err("H_FREE_RESOURCE failed ret=%li ", ret);
+		ehca_gen_err("H_FREE_RESOURCE failed ret=%lli ", ret);
 
 	return ret;
 }
@@ -719,7 +719,7 @@ u64 hipz_h_destroy_eq(const struct ipz_adapter_handle adapter_handle,
 				      0, 0, 0, 0, 0);
 
 	if (ret == H_RESOURCE)
-		ehca_gen_err("Resource in use. ret=%li ", ret);
+		ehca_gen_err("Resource in use. ret=%lli ", ret);
 
 	return ret;
 }
@@ -733,7 +733,7 @@ u64 hipz_h_alloc_resource_mr(const struct ipz_adapter_handle adapter_handle,
 			     struct ehca_mr_hipzout_parms *outparms)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_ALLOC_RESOURCE, outs,
 				adapter_handle.handle,            /* r4 */
@@ -774,9 +774,9 @@ u64 hipz_h_register_rpage_mr(const struct ipz_adapter_handle adapter_handle,
 
 	if ((count > 1) && (logical_address_of_page & (EHCA_PAGESIZE-1))) {
 		ehca_gen_err("logical_address_of_page not on a 4k boundary "
-			     "adapter_handle=%lx mr=%p mr_handle=%lx "
+			     "adapter_handle=%llx mr=%p mr_handle=%llx "
 			     "pagesize=%x queue_type=%x "
-			     "logical_address_of_page=%lx count=%lx",
+			     "logical_address_of_page=%llx count=%llx",
 			     adapter_handle.handle, mr,
 			     mr->ipz_mr_handle.handle, pagesize, queue_type,
 			     logical_address_of_page, count);
@@ -794,7 +794,7 @@ u64 hipz_h_query_mr(const struct ipz_adapter_handle adapter_handle,
 		    struct ehca_mr_hipzout_parms *outparms)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_QUERY_MR, outs,
 				adapter_handle.handle,     /* r4 */
@@ -828,7 +828,7 @@ u64 hipz_h_reregister_pmr(const struct ipz_adapter_handle adapter_handle,
 			  struct ehca_mr_hipzout_parms *outparms)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_REREGISTER_PMR, outs,
 				adapter_handle.handle,    /* r4 */
@@ -855,7 +855,7 @@ u64 hipz_h_register_smr(const struct ipz_adapter_handle adapter_handle,
 			struct ehca_mr_hipzout_parms *outparms)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_REGISTER_SMR, outs,
 				adapter_handle.handle,            /* r4 */
@@ -877,7 +877,7 @@ u64 hipz_h_alloc_resource_mw(const struct ipz_adapter_handle adapter_handle,
 			     struct ehca_mw_hipzout_parms *outparms)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_ALLOC_RESOURCE, outs,
 				adapter_handle.handle,      /* r4 */
@@ -895,7 +895,7 @@ u64 hipz_h_query_mw(const struct ipz_adapter_handle adapter_handle,
 		    struct ehca_mw_hipzout_parms *outparms)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_QUERY_MW, outs,
 				adapter_handle.handle,    /* r4 */
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 39167a797f9..a91cb4c3fa5 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1462,7 +1462,8 @@ static void __set_data_seg(struct mlx4_wqe_data_seg *dseg, struct ib_sge *sg)
 }
 
 static int build_lso_seg(struct mlx4_wqe_lso_seg *wqe, struct ib_send_wr *wr,
-			 struct mlx4_ib_qp *qp, unsigned *lso_seg_len)
+			 struct mlx4_ib_qp *qp, unsigned *lso_seg_len,
+			 __be32 *lso_hdr_sz)
 {
 	unsigned halign = ALIGN(sizeof *wqe + wr->wr.ud.hlen, 16);
 
@@ -1479,12 +1480,8 @@ static int build_lso_seg(struct mlx4_wqe_lso_seg *wqe, struct ib_send_wr *wr,
 
 	memcpy(wqe->header, wr->wr.ud.header, wr->wr.ud.hlen);
 
-	/* make sure LSO header is written before overwriting stamping */
-	wmb();
-
-	wqe->mss_hdr_size = cpu_to_be32((wr->wr.ud.mss - wr->wr.ud.hlen) << 16 |
-					wr->wr.ud.hlen);
-
+	*lso_hdr_sz  = cpu_to_be32((wr->wr.ud.mss - wr->wr.ud.hlen) << 16 |
+				   wr->wr.ud.hlen);
 	*lso_seg_len = halign;
 	return 0;
 }
@@ -1518,6 +1515,9 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 	int uninitialized_var(stamp);
 	int uninitialized_var(size);
 	unsigned uninitialized_var(seglen);
+	__be32 dummy;
+	__be32 *lso_wqe;
+	__be32 uninitialized_var(lso_hdr_sz);
 	int i;
 
 	spin_lock_irqsave(&qp->sq.lock, flags);
@@ -1525,6 +1525,8 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 	ind = qp->sq_next_wqe;
 
 	for (nreq = 0; wr; ++nreq, wr = wr->next) {
+		lso_wqe = &dummy;
+
 		if (mlx4_wq_overflow(&qp->sq, nreq, qp->ibqp.send_cq)) {
 			err = -ENOMEM;
 			*bad_wr = wr;
@@ -1606,11 +1608,12 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 			size += sizeof (struct mlx4_wqe_datagram_seg) / 16;
 
 			if (wr->opcode == IB_WR_LSO) {
-				err = build_lso_seg(wqe, wr, qp, &seglen);
+				err = build_lso_seg(wqe, wr, qp, &seglen, &lso_hdr_sz);
 				if (unlikely(err)) {
 					*bad_wr = wr;
 					goto out;
 				}
+				lso_wqe = (__be32 *) wqe;
 				wqe  += seglen;
 				size += seglen / 16;
 			}
@@ -1652,6 +1655,14 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 		for (i = wr->num_sge - 1; i >= 0; --i, --dseg)
 			set_data_seg(dseg, wr->sg_list + i);
 
+		/*
+		 * Possibly overwrite stamping in cacheline with LSO
+		 * segment only after making sure all data segments
+		 * are written.
+		 */
+		wmb();
+		*lso_wqe = lso_hdr_sz;
+
 		ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ?
 				    MLX4_WQE_CTRL_FENCE : 0) | size;
 
@@ -1686,7 +1697,6 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 			stamp_send_wqe(qp, stamp, size * 16);
 			ind = pad_wraparound(qp, ind);
 		}
-
 	}
 
 out:
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index dce0443f9d6..0bd2a4ff084 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -106,23 +106,17 @@ int ipoib_open(struct net_device *dev)
 
 	ipoib_dbg(priv, "bringing up interface\n");
 
-	set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
+	if (!test_and_set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags))
+		napi_enable(&priv->napi);
 
 	if (ipoib_pkey_dev_delay_open(dev))
 		return 0;
 
-	napi_enable(&priv->napi);
+	if (ipoib_ib_dev_open(dev))
+		goto err_disable;
 
-	if (ipoib_ib_dev_open(dev)) {
-		napi_disable(&priv->napi);
-		return -EINVAL;
-	}
-
-	if (ipoib_ib_dev_up(dev)) {
-		ipoib_ib_dev_stop(dev, 1);
-		napi_disable(&priv->napi);
-		return -EINVAL;
-	}
+	if (ipoib_ib_dev_up(dev))
+		goto err_stop;
 
 	if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) {
 		struct ipoib_dev_priv *cpriv;
@@ -144,6 +138,15 @@ int ipoib_open(struct net_device *dev)
 	netif_start_queue(dev);
 
 	return 0;
+
+err_stop:
+	ipoib_ib_dev_stop(dev, 1);
+
+err_disable:
+	napi_disable(&priv->napi);
+	clear_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
+
+	return -EINVAL;
 }
 
 static int ipoib_stop(struct net_device *dev)
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index 59d02e0b8df..425e31112ed 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -409,7 +409,7 @@ static int ipoib_mcast_join_complete(int status,
 	}
 
 	if (mcast->logcount++ < 20) {
-		if (status == -ETIMEDOUT) {
+		if (status == -ETIMEDOUT || status == -EAGAIN) {
 			ipoib_dbg_mcast(priv, "multicast join failed for %pI6, status %d\n",
 					mcast->mcmember.mgid.raw, status);
 		} else {
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
index 2cf1a408871..5a76a551035 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
@@ -61,6 +61,7 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey)
 
 	ppriv = netdev_priv(pdev);
 
+	rtnl_lock();
 	mutex_lock(&ppriv->vlan_mutex);
 
 	/*
@@ -111,7 +112,7 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey)
 		goto device_init_failed;
 	}
 
-	result = register_netdev(priv->dev);
+	result = register_netdevice(priv->dev);
 	if (result) {
 		ipoib_warn(priv, "failed to initialize; error %i", result);
 		goto register_failed;
@@ -134,12 +135,13 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey)
 	list_add_tail(&priv->list, &ppriv->child_intfs);
 
 	mutex_unlock(&ppriv->vlan_mutex);
+	rtnl_unlock();
 
 	return 0;
 
 sysfs_failed:
 	ipoib_delete_debug_files(priv->dev);
-	unregister_netdev(priv->dev);
+	unregister_netdevice(priv->dev);
 
 register_failed:
 	ipoib_dev_cleanup(priv->dev);
@@ -149,6 +151,7 @@ device_init_failed:
 
 err:
 	mutex_unlock(&ppriv->vlan_mutex);
+	rtnl_unlock();
 	return result;
 }
 
@@ -162,10 +165,11 @@ int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey)
 
 	ppriv = netdev_priv(pdev);
 
+	rtnl_lock();
 	mutex_lock(&ppriv->vlan_mutex);
 	list_for_each_entry_safe(priv, tpriv, &ppriv->child_intfs, list) {
 		if (priv->pkey == pkey) {
-			unregister_netdev(priv->dev);
+			unregister_netdevice(priv->dev);
 			ipoib_dev_cleanup(priv->dev);
 			list_del(&priv->list);
 			free_netdev(priv->dev);
@@ -175,6 +179,7 @@ int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey)
 		}
 	}
 	mutex_unlock(&ppriv->vlan_mutex);
+	rtnl_unlock();
 
 	return ret;
 }
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index a3551dd0324..aa30b5cb351 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -431,6 +431,7 @@ set_arg(void __user *b, void *val,int len)
 	return 0;
 }
 
+#ifdef CONFIG_IPPP_FILTER
 static int get_filter(void __user *arg, struct sock_filter **p)
 {
 	struct sock_fprog uprog;
@@ -465,6 +466,7 @@ static int get_filter(void __user *arg, struct sock_filter **p)
 	*p = code;
 	return uprog.len;
 }
+#endif /* CONFIG_IPPP_FILTER */
 
 /*
  * ippp device ioctl
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 90663e01a56..60156dfdc60 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -224,7 +224,7 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
 			break;
 
 		/* If the Guest asked to be stopped, we sleep.  The Guest's
-		 * clock timer or LHCALL_BREAK from the Waker will wake us. */
+		 * clock timer or LHREQ_BREAK from the Waker will wake us. */
 		if (cpu->halted) {
 			set_current_state(TASK_INTERRUPTIBLE);
 			schedule();
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 34bc017b8b3..b8ee103eed5 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -307,9 +307,8 @@ static int close(struct inode *inode, struct file *file)
 	 * kmalloc()ed string, either of which is ok to hand to kfree(). */
 	if (!IS_ERR(lg->dead))
 		kfree(lg->dead);
-	/* We clear the entire structure, which also marks it as free for the
-	 * next user. */
-	memset(lg, 0, sizeof(*lg));
+	/* Free the memory allocated to the lguest_struct */
+	kfree(lg);
 	/* Release lock and exit. */
 	mutex_unlock(&lguest_lock);
 
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 1e3aea9eecf..09658b21847 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -25,13 +25,13 @@ static inline dev_info_t *which_dev(mddev_t *mddev, sector_t sector)
 {
 	dev_info_t *hash;
 	linear_conf_t *conf = mddev_to_conf(mddev);
+	sector_t idx = sector >> conf->sector_shift;
 
 	/*
 	 * sector_div(a,b) returns the remainer and sets a to a/b
 	 */
-	sector >>= conf->sector_shift;
-	(void)sector_div(sector, conf->spacing);
-	hash = conf->hash_table[sector];
+	(void)sector_div(idx, conf->spacing);
+	hash = conf->hash_table[idx];
 
 	while (sector >= hash->num_sectors + hash->start_sector)
 		hash++;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 41e2509bf89..4495104f6c9 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1481,6 +1481,11 @@ static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev)
 		if (find_rdev_nr(mddev, rdev->desc_nr))
 			return -EBUSY;
 	}
+	if (mddev->max_disks && rdev->desc_nr >= mddev->max_disks) {
+		printk(KERN_WARNING "md: %s: array is limited to %d devices\n",
+		       mdname(mddev), mddev->max_disks);
+		return -EBUSY;
+	}
 	bdevname(rdev->bdev,b);
 	while ( (s=strchr(b, '/')) != NULL)
 		*s = '!';
@@ -2441,6 +2446,15 @@ static void analyze_sbs(mddev_t * mddev)
 
 	i = 0;
 	rdev_for_each(rdev, tmp, mddev) {
+		if (rdev->desc_nr >= mddev->max_disks ||
+		    i > mddev->max_disks) {
+			printk(KERN_WARNING
+			       "md: %s: %s: only %d devices permitted\n",
+			       mdname(mddev), bdevname(rdev->bdev, b),
+			       mddev->max_disks);
+			kick_rdev_from_array(rdev);
+			continue;
+		}
 		if (rdev != freshest)
 			if (super_types[mddev->major_version].
 			    validate_super(mddev, rdev)) {
@@ -4614,13 +4628,6 @@ static int hot_add_disk(mddev_t * mddev, dev_t dev)
 	 * noticed in interrupt contexts ...
 	 */
 
-	if (rdev->desc_nr == mddev->max_disks) {
-		printk(KERN_WARNING "%s: can not hot-add to full array!\n",
-			mdname(mddev));
-		err = -EBUSY;
-		goto abort_unbind_export;
-	}
-
 	rdev->raid_disk = -1;
 
 	md_update_sb(mddev, 1);
@@ -4634,9 +4641,6 @@ static int hot_add_disk(mddev_t * mddev, dev_t dev)
 	md_new_event(mddev);
 	return 0;
 
-abort_unbind_export:
-	unbind_rdev_from_array(rdev);
-
 abort_export:
 	export_rdev(rdev);
 	return err;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 7b4f5f7155d..01e3cffd03b 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1640,7 +1640,8 @@ static void raid1d(mddev_t *mddev)
 			}
 
 			bio = r1_bio->bios[r1_bio->read_disk];
-			if ((disk=read_balance(conf, r1_bio)) == -1) {
+			if ((disk=read_balance(conf, r1_bio)) == -1 ||
+			    disk == r1_bio->read_disk) {
 				printk(KERN_ALERT "raid1: %s: unrecoverable I/O"
 				       " read error for block %llu\n",
 				       bdevname(bio->bi_bdev,b),
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index 6098b626811..47fee05eaef 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -576,6 +576,7 @@ static int set_control(struct saa7146_fh *fh, struct v4l2_control *c)
 		vv->vflip = c->value;
 		break;
 	default: {
+		mutex_unlock(&dev->lock);
 		return -EINVAL;
 	}
 	}
diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/common/tuners/mxl5007t.c
index 64379f2bf23..3ec28945c26 100644
--- a/drivers/media/common/tuners/mxl5007t.c
+++ b/drivers/media/common/tuners/mxl5007t.c
@@ -657,7 +657,7 @@ static int mxl5007t_get_status(struct dvb_frontend *fe, u32 *status)
 {
 	struct mxl5007t_state *state = fe->tuner_priv;
 	int rf_locked, ref_locked;
-	s32 rf_input_level;
+	s32 rf_input_level = 0;
 	int ret;
 
 	if (fe->ops.i2c_gate_ctrl)
diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
index 98ee16773ff..7e3aeaa7370 100644
--- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
@@ -93,6 +93,9 @@ struct dvb_ca_slot {
 	/* current state of the CAM */
 	int slot_state;
 
+	/* mutex used for serializing access to one CI slot */
+	struct mutex slot_lock;
+
 	/* Number of CAMCHANGES that have occurred since last processing */
 	atomic_t camchange_count;
 
@@ -711,14 +714,20 @@ static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * b
 	dprintk("%s\n", __func__);
 
 
-	// sanity check
+	/* sanity check */
 	if (bytes_write > ca->slot_info[slot].link_buf_size)
 		return -EINVAL;
 
-	/* check if interface is actually waiting for us to read from it, or if a read is in progress */
+	/* it is possible we are dealing with a single buffer implementation,
+	   thus if there is data available for read or if there is even a read
+	   already in progress, we do nothing but awake the kernel thread to
+	   process the data if necessary. */
 	if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
 		goto exitnowrite;
 	if (status & (STATUSREG_DA | STATUSREG_RE)) {
+		if (status & STATUSREG_DA)
+			dvb_ca_en50221_thread_wakeup(ca);
+
 		status = -EAGAIN;
 		goto exitnowrite;
 	}
@@ -987,6 +996,8 @@ static int dvb_ca_en50221_thread(void *data)
 		/* go through all the slots processing them */
 		for (slot = 0; slot < ca->slot_count; slot++) {
 
+			mutex_lock(&ca->slot_info[slot].slot_lock);
+
 			// check the cam status + deal with CAMCHANGEs
 			while (dvb_ca_en50221_check_camstatus(ca, slot)) {
 				/* clear down an old CI slot if necessary */
@@ -1122,7 +1133,7 @@ static int dvb_ca_en50221_thread(void *data)
 
 			case DVB_CA_SLOTSTATE_RUNNING:
 				if (!ca->open)
-					continue;
+					break;
 
 				// poll slots for data
 				pktcount = 0;
@@ -1146,6 +1157,8 @@ static int dvb_ca_en50221_thread(void *data)
 				}
 				break;
 			}
+
+			mutex_unlock(&ca->slot_info[slot].slot_lock);
 		}
 	}
 
@@ -1181,6 +1194,7 @@ static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file,
 	switch (cmd) {
 	case CA_RESET:
 		for (slot = 0; slot < ca->slot_count; slot++) {
+			mutex_lock(&ca->slot_info[slot].slot_lock);
 			if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE) {
 				dvb_ca_en50221_slot_shutdown(ca, slot);
 				if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)
@@ -1188,6 +1202,7 @@ static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file,
 								     slot,
 								     DVB_CA_EN50221_CAMCHANGE_INSERTED);
 			}
+			mutex_unlock(&ca->slot_info[slot].slot_lock);
 		}
 		ca->next_read_slot = 0;
 		dvb_ca_en50221_thread_wakeup(ca);
@@ -1308,7 +1323,9 @@ static ssize_t dvb_ca_en50221_io_write(struct file *file,
 				goto exit;
 			}
 
+			mutex_lock(&ca->slot_info[slot].slot_lock);
 			status = dvb_ca_en50221_write_data(ca, slot, fragbuf, fraglen + 2);
+			mutex_unlock(&ca->slot_info[slot].slot_lock);
 			if (status == (fraglen + 2)) {
 				written = 1;
 				break;
@@ -1664,6 +1681,7 @@ int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter,
 		ca->slot_info[i].slot_state = DVB_CA_SLOTSTATE_NONE;
 		atomic_set(&ca->slot_info[i].camchange_count, 0);
 		ca->slot_info[i].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED;
+		mutex_init(&ca->slot_info[i].slot_lock);
 	}
 
 	if (signal_pending(current)) {
diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.h b/drivers/media/dvb/dvb-core/dvb_ca_en50221.h
index 8467e63ddc0..7df2e141187 100644
--- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.h
+++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.h
@@ -45,8 +45,10 @@ struct dvb_ca_en50221 {
 	/* the module owning this structure */
 	struct module* owner;
 
-	/* NOTE: the read_*, write_* and poll_slot_status functions must use locks as
-	 * they may be called from several threads at once */
+	/* NOTE: the read_*, write_* and poll_slot_status functions will be
+	 * called for different slots concurrently and need to use locks where
+	 * and if appropriate. There will be no concurrent access to one slot.
+	 */
 
 	/* functions for accessing attribute memory on the CAM */
 	int (*read_attribute_mem)(struct dvb_ca_en50221* ca, int slot, int address);
diff --git a/drivers/media/dvb/dvb-usb/af9005-fe.c b/drivers/media/dvb/dvb-usb/af9005-fe.c
index b1a9c4cdec9..199ece0d488 100644
--- a/drivers/media/dvb/dvb-usb/af9005-fe.c
+++ b/drivers/media/dvb/dvb-usb/af9005-fe.c
@@ -220,7 +220,7 @@ static int af9005_get_post_vit_ber(struct dvb_frontend *fe,
 				   u16 * abort_count)
 {
 	u32 loc_cw_count = 0, loc_err_count;
-	u16 loc_abort_count;
+	u16 loc_abort_count = 0;
 	int ret;
 
 	ret =
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index e1e9aa5c6b8..6a97a40d3df 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -694,7 +694,12 @@ static int af9015_read_config(struct usb_device *udev)
 
 	/* IR remote controller */
 	req.addr = AF9015_EEPROM_IR_MODE;
-	ret = af9015_rw_udev(udev, &req);
+	/* first message will timeout often due to possible hw bug */
+	for (i = 0; i < 4; i++) {
+		ret = af9015_rw_udev(udev, &req);
+		if (!ret)
+			break;
+	}
 	if (ret)
 		goto error;
 	deb_info("%s: IR mode:%d\n", __func__, val);
@@ -835,18 +840,19 @@ static int af9015_read_config(struct usb_device *udev)
 	if (!dvb_usb_af9015_dual_mode)
 		af9015_config.dual_mode = 0;
 
-	/* set buffer size according to USB port speed */
+	/* Set adapter0 buffer size according to USB port speed, adapter1 buffer
+	   size can be static because it is enabled only USB2.0 */
 	for (i = 0; i < af9015_properties_count; i++) {
 		/* USB1.1 set smaller buffersize and disable 2nd adapter */
 		if (udev->speed == USB_SPEED_FULL) {
-			af9015_properties[i].adapter->stream.u.bulk.buffersize =
-				TS_USB11_MAX_PACKET_SIZE;
+			af9015_properties[i].adapter[0].stream.u.bulk.buffersize
+				= TS_USB11_MAX_PACKET_SIZE;
 			/* disable 2nd adapter because we don't have
 			   PID-filters */
 			af9015_config.dual_mode = 0;
 		} else {
-			af9015_properties[i].adapter->stream.u.bulk.buffersize =
-				TS_USB20_MAX_PACKET_SIZE;
+			af9015_properties[i].adapter[0].stream.u.bulk.buffersize
+				= TS_USB20_MAX_PACKET_SIZE;
 		}
 	}
 
@@ -1254,6 +1260,12 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 					.type = USB_BULK,
 					.count = 6,
 					.endpoint = 0x85,
+					.u = {
+						.bulk = {
+							.buffersize =
+						TS_USB20_MAX_PACKET_SIZE,
+						}
+					}
 				},
 			}
 		},
@@ -1353,6 +1365,12 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 					.type = USB_BULK,
 					.count = 6,
 					.endpoint = 0x85,
+					.u = {
+						.bulk = {
+							.buffersize =
+						TS_USB20_MAX_PACKET_SIZE,
+						}
+					}
 				},
 			}
 		},
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 39173278891..635d30a5507 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -1393,6 +1393,9 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_ASUS,	USB_PID_ASUS_U3000H) },
 /* 40 */{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV801E) },
 	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV801E_SE) },
+	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_EXPRESS) },
+	{ USB_DEVICE(USB_VID_TERRATEC,
+			USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1537,7 +1540,8 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			{   "DiBcom STK7700D reference design",
 				{ &dib0700_usb_id_table[14], NULL },
 				{ NULL },
-			}
+			},
+
 		},
 
 		.rc_interval      = DEFAULT_RC_INTERVAL,
@@ -1557,7 +1561,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			},
 		},
 
-		.num_device_descs = 2,
+		.num_device_descs = 3,
 		.devices = {
 			{   "ASUS My Cinema U3000 Mini DVBT Tuner",
 				{ &dib0700_usb_id_table[23], NULL },
@@ -1566,6 +1570,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			{   "Yuan EC372S",
 				{ &dib0700_usb_id_table[31], NULL },
 				{ NULL },
+			},
+			{   "Terratec Cinergy T Express",
+				{ &dib0700_usb_id_table[42], NULL },
+				{ NULL },
 			}
 		},
 
@@ -1653,7 +1661,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			}
 		},
 
-		.num_device_descs = 4,
+		.num_device_descs = 5,
 		.devices = {
 			{   "DiBcom STK7070PD reference design",
 				{ &dib0700_usb_id_table[17], NULL },
@@ -1670,6 +1678,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			{   "Hauppauge Nova-TD-500 (84xxx)",
 				{ &dib0700_usb_id_table[36], NULL },
 				{ NULL },
+			},
+			{  "Terratec Cinergy DT USB XS Diversity",
+				{ &dib0700_usb_id_table[43], NULL },
+				{ NULL },
 			}
 		}
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index a4fca3fca5e..0db0c06ee6f 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -162,8 +162,10 @@
 #define USB_PID_AVERMEDIA_A309				0xa309
 #define USB_PID_TECHNOTREND_CONNECT_S2400               0x3006
 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY	0x005a
+#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2	0x0081
 #define USB_PID_TERRATEC_CINERGY_HT_USB_XE		0x0058
 #define USB_PID_TERRATEC_CINERGY_HT_EXPRESS		0x0060
+#define USB_PID_TERRATEC_CINERGY_T_EXPRESS		0x0062
 #define USB_PID_TERRATEC_CINERGY_T_XXS			0x0078
 #define USB_PID_PINNACLE_EXPRESSCARD_320CX		0x022e
 #define USB_PID_PINNACLE_PCTV2000E			0x022c
diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c
index ec4e08dbc69..1e81e713df6 100644
--- a/drivers/media/dvb/frontends/drx397xD.c
+++ b/drivers/media/dvb/frontends/drx397xD.c
@@ -646,7 +646,7 @@ static int drx_tune(struct drx397xD_state *s,
 	u32 edi = 0, ebx = 0, ebp = 0, edx = 0;
 	u16 v20 = 0, v1E = 0, v16 = 0, v14 = 0, v12 = 0, v10 = 0, v0E = 0;
 
-	int rc, df_tuner;
+	int rc, df_tuner = 0;
 	int a, b, c, d;
 	pr_debug("%s %d\n", __func__, s->config.d60);
 
diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c
index cf4d8936bb8..3e08d985d6e 100644
--- a/drivers/media/dvb/frontends/s5h1409.c
+++ b/drivers/media/dvb/frontends/s5h1409.c
@@ -545,9 +545,6 @@ static int s5h1409_set_frontend(struct dvb_frontend *fe,
 
 	s5h1409_enable_modulation(fe, p->u.vsb.modulation);
 
-	/* Allow the demod to settle */
-	msleep(100);
-
 	if (fe->ops.tuner_ops.set_params) {
 		if (fe->ops.i2c_gate_ctrl)
 			fe->ops.i2c_gate_ctrl(fe, 1);
@@ -562,6 +559,10 @@ static int s5h1409_set_frontend(struct dvb_frontend *fe,
 		s5h1409_set_qam_interleave_mode(fe);
 	}
 
+	/* Issue a reset to the demod so it knows to resync against the
+	   newly tuned frequency */
+	s5h1409_softreset(fe);
+
 	return 0;
 }
 
diff --git a/drivers/media/dvb/frontends/stb0899_algo.c b/drivers/media/dvb/frontends/stb0899_algo.c
index 83dc7e12d5f..a67d1775a43 100644
--- a/drivers/media/dvb/frontends/stb0899_algo.c
+++ b/drivers/media/dvb/frontends/stb0899_algo.c
@@ -31,6 +31,8 @@ inline u32 stb0899_do_div(u64 n, u32 d)
 	return n;
 }
 
+#if 0
+/* These functions are currently unused */
 /*
  * stb0899_calc_srate
  * Compute symbol rate
@@ -63,6 +65,7 @@ static u32 stb0899_get_srate(struct stb0899_state *state)
 
 	return stb0899_calc_srate(internal->master_clk, sfr);
 }
+#endif
 
 /*
  * stb0899_set_srate
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index 1638e1d9f53..83e9e7750c8 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -470,6 +470,7 @@ static void frontend_init(struct budget *budget)
 		budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config, &budget->i2c_adap);
 		if (budget->dvb_frontend) {
 			budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params;
+			budget->dvb_frontend->tuner_priv = NULL;
 			break;
 		}
 		break;
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index 0aa96df80fc..d91e0638448 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -1384,7 +1384,7 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec)
 static int ttusb_dec_init_stb(struct ttusb_dec *dec)
 {
 	int result;
-	unsigned int mode, model, version;
+	unsigned int mode = 0, model = 0, version = 0;
 
 	dprintk("%s\n", __func__);
 
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
index 0747dc8862b..fdfc7bf86b9 100644
--- a/drivers/media/radio/radio-mr800.c
+++ b/drivers/media/radio/radio-mr800.c
@@ -194,10 +194,10 @@ static int amradio_start(struct amradio_device *radio)
 		return retval;
 	}
 
-	mutex_unlock(&radio->lock);
-
 	radio->muted = 0;
 
+	mutex_unlock(&radio->lock);
+
 	return retval;
 }
 
@@ -230,10 +230,10 @@ static int amradio_stop(struct amradio_device *radio)
 		return retval;
 	}
 
-	mutex_unlock(&radio->lock);
-
 	radio->muted = 1;
 
+	mutex_unlock(&radio->lock);
+
 	return retval;
 }
 
@@ -284,10 +284,10 @@ static int amradio_setfreq(struct amradio_device *radio, int freq)
 		return retval;
 	}
 
-	mutex_unlock(&radio->lock);
-
 	radio->stereo = 0;
 
+	mutex_unlock(&radio->lock);
+
 	return retval;
 }
 
diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c
index 14bebf8a116..87e91072627 100644
--- a/drivers/media/video/cs5345.c
+++ b/drivers/media/video/cs5345.c
@@ -18,7 +18,6 @@
  */
 
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/i2c.h>
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 8f1db57bd1d..bfe25841dbf 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -1586,7 +1586,8 @@ static int mpeg_open(struct file *file)
 	lock_kernel();
 	list_for_each(list, &cx23885_devlist) {
 		h = list_entry(list, struct cx23885_dev, devlist);
-		if (h->v4l_device->minor == minor) {
+		if (h->v4l_device &&
+		    h->v4l_device->minor == minor) {
 			dev = h;
 			break;
 		}
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 2d81c4d0434..eaa11893bfe 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -730,12 +730,13 @@ static int video_open(struct file *file)
 	lock_kernel();
 	list_for_each(list, &cx23885_devlist) {
 		h = list_entry(list, struct cx23885_dev, devlist);
-		if (h->video_dev->minor == minor) {
+		if (h->video_dev &&
+		    h->video_dev->minor == minor) {
 			dev  = h;
 			type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 		}
 		if (h->vbi_dev &&
-		   h->vbi_dev->minor == minor) {
+		    h->vbi_dev->minor == minor) {
 			dev  = h;
 			type = V4L2_BUF_TYPE_VBI_CAPTURE;
 		}
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 88f2fd32bfe..25eb3bec9e5 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -1382,6 +1382,14 @@ static int cx25840_log_status(struct v4l2_subdev *sd)
 
 static int cx25840_command(struct i2c_client *client, unsigned cmd, void *arg)
 {
+	/* ignore this command */
+	if (cmd == TUNER_SET_TYPE_ADDR || cmd == TUNER_SET_CONFIG)
+		return 0;
+
+	/* Old-style drivers rely on initialization on first use, so
+	   call the init whenever a command is issued to this driver.
+	   New-style drivers using v4l2_subdev should call init explicitly. */
+	cx25840_init(i2c_get_clientdata(client), 0);
 	return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg);
 }
 
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index 613dfea4ff3..aef5297534a 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -614,34 +614,41 @@ static struct stv0288_config tevii_tuner_earda_config = {
 	.set_ts_params = cx24116_set_ts_param,
 };
 
-static int dvb_register(struct cx8802_dev *dev)
+static int cx8802_alloc_frontends(struct cx8802_dev *dev)
 {
 	struct cx88_core *core = dev->core;
-	struct videobuf_dvb_frontend *fe0, *fe1 = NULL;
-	int mfe_shared = 0; /* bus not shared by default */
+	struct videobuf_dvb_frontend *fe = NULL;
 	int i;
 
-	if (0 != core->i2c_rc) {
-		printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name);
-		goto frontend_detach;
-	}
-
-	if (!core->board.num_frontends)
-		return -EINVAL;
-
 	mutex_init(&dev->frontends.lock);
 	INIT_LIST_HEAD(&dev->frontends.felist);
 
+	if (!core->board.num_frontends)
+		return -ENODEV;
+
 	printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__,
 			 core->board.num_frontends);
 	for (i = 1; i <= core->board.num_frontends; i++) {
-		fe0 = videobuf_dvb_alloc_frontend(&dev->frontends, i);
-		if (!fe0) {
+		fe = videobuf_dvb_alloc_frontend(&dev->frontends, i);
+		if (!fe) {
 			printk(KERN_ERR "%s() failed to alloc\n", __func__);
 			videobuf_dvb_dealloc_frontends(&dev->frontends);
-			goto frontend_detach;
+			return -ENOMEM;
 		}
 	}
+	return 0;
+}
+
+static int dvb_register(struct cx8802_dev *dev)
+{
+	struct cx88_core *core = dev->core;
+	struct videobuf_dvb_frontend *fe0, *fe1 = NULL;
+	int mfe_shared = 0; /* bus not shared by default */
+
+	if (0 != core->i2c_rc) {
+		printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name);
+		goto frontend_detach;
+	}
 
 	/* Get the first frontend */
 	fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
@@ -1243,6 +1250,8 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv)
 	struct cx88_core *core = drv->core;
 	struct cx8802_dev *dev = drv->core->dvbdev;
 	int err;
+	struct videobuf_dvb_frontend *fe;
+	int i;
 
 	dprintk( 1, "%s\n", __func__);
 	dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
@@ -1258,39 +1267,34 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv)
 	/* If vp3054 isn't enabled, a stub will just return 0 */
 	err = vp3054_i2c_probe(dev);
 	if (0 != err)
-		goto fail_probe;
+		goto fail_core;
 
 	/* dvb stuff */
 	printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name);
 	dev->ts_gen_cntrl = 0x0c;
 
+	err = cx8802_alloc_frontends(dev);
+	if (err)
+		goto fail_core;
+
 	err = -ENODEV;
-	if (core->board.num_frontends) {
-		struct videobuf_dvb_frontend *fe;
-		int i;
-
-		for (i = 1; i <= core->board.num_frontends; i++) {
-			fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i);
-			if (fe == NULL) {
-				printk(KERN_ERR "%s() failed to get frontend(%d)\n",
+	for (i = 1; i <= core->board.num_frontends; i++) {
+		fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i);
+		if (fe == NULL) {
+			printk(KERN_ERR "%s() failed to get frontend(%d)\n",
 					__func__, i);
-				goto fail_probe;
-			}
-			videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops,
+			goto fail_probe;
+		}
+		videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops,
 				    &dev->pci->dev, &dev->slock,
 				    V4L2_BUF_TYPE_VIDEO_CAPTURE,
 				    V4L2_FIELD_TOP,
 				    sizeof(struct cx88_buffer),
 				    dev);
-			/* init struct videobuf_dvb */
-			fe->dvb.name = dev->core->name;
-		}
-	} else {
-		/* no frontends allocated */
-		printk(KERN_ERR "%s/2 .num_frontends should be non-zero\n",
-			core->name);
-		goto fail_core;
+		/* init struct videobuf_dvb */
+		fe->dvb.name = dev->core->name;
 	}
+
 	err = dvb_register(dev);
 	if (err)
 		/* frontends/adapter de-allocated in dvb_register */
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index 60a8b3187f1..6025fdd2334 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -336,8 +336,8 @@ struct cx88_core {
 	/* config info -- dvb */
 #if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
 	int 			   (*prev_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
-	void			   (*gate_ctrl)(struct cx88_core  *core, int open);
 #endif
+	void			   (*gate_ctrl)(struct cx88_core  *core, int open);
 
 	/* state info */
 	struct task_struct         *kthread;
diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c
index 94378ccb750..5d882a44e3e 100644
--- a/drivers/media/video/em28xx/em28xx-audio.c
+++ b/drivers/media/video/em28xx/em28xx-audio.c
@@ -62,9 +62,15 @@ static int em28xx_isoc_audio_deinit(struct em28xx *dev)
 
 	dprintk("Stopping isoc\n");
 	for (i = 0; i < EM28XX_AUDIO_BUFS; i++) {
-		usb_unlink_urb(dev->adev.urb[i]);
+		if (!irqs_disabled())
+			usb_kill_urb(dev->adev.urb[i]);
+		else
+			usb_unlink_urb(dev->adev.urb[i]);
 		usb_free_urb(dev->adev.urb[i]);
 		dev->adev.urb[i] = NULL;
+
+		kfree(dev->adev.transfer_buffer[i]);
+		dev->adev.transfer_buffer[i] = NULL;
 	}
 
 	return 0;
@@ -389,11 +395,15 @@ static int snd_em28xx_capture_trigger(struct snd_pcm_substream *substream,
 static snd_pcm_uframes_t snd_em28xx_capture_pointer(struct snd_pcm_substream
 						    *substream)
 {
-	struct em28xx *dev;
+       unsigned long flags;
 
+	struct em28xx *dev;
 	snd_pcm_uframes_t hwptr_done;
+
 	dev = snd_pcm_substream_chip(substream);
+       spin_lock_irqsave(&dev->adev.slock, flags);
 	hwptr_done = dev->adev.hwptr_done_capture;
+       spin_unlock_irqrestore(&dev->adev.slock, flags);
 
 	return hwptr_done;
 }
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index ef9bf008a92..3b3ca3f46d5 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -102,6 +102,18 @@ static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
 /* Board  - EM2870 Kworld 355u
    Analog - No input analog */
 
+static struct em28xx_reg_seq kworld_330u_analog[] = {
+	{EM28XX_R08_GPIO,	0x6d,	~EM_GPIO_4,	10},
+	{EM2880_R04_GPO,	0x00,	0xff,		10},
+	{ -1,			-1,	-1,		-1},
+};
+
+static struct em28xx_reg_seq kworld_330u_digital[] = {
+	{EM28XX_R08_GPIO,	0x6e,	~EM_GPIO_4,	10},
+	{EM2880_R04_GPO,	0x08,	0xff,		10},
+	{ -1,			-1,	-1,		-1},
+};
+
 /* Callback for the most boards */
 static struct em28xx_reg_seq default_tuner_gpio[] = {
 	{EM28XX_R08_GPIO,	EM_GPIO_4,	EM_GPIO_4,	10},
@@ -1177,29 +1189,33 @@ struct em28xx_board em28xx_boards[] = {
 			.gpio     = hauppauge_wintv_hvr_900_analog,
 		} },
 	},
-	[EM2883_BOARD_KWORLD_HYBRID_A316] = {
+	[EM2883_BOARD_KWORLD_HYBRID_330U] = {
 		.name         = "Kworld PlusTV HD Hybrid 330",
 		.tuner_type   = TUNER_XC2028,
 		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
 		.mts_firmware = 1,
 		.has_dvb      = 1,
-		.dvb_gpio     = default_digital,
+		.dvb_gpio     = kworld_330u_digital,
+		.xclk             = EM28XX_XCLK_FREQUENCY_12MHZ,
+		.i2c_speed        = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_EEPROM_ON_BOARD | EM28XX_I2C_EEPROM_KEY_VALID,
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
-			.gpio     = default_analog,
+			.gpio     = kworld_330u_analog,
+			.aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
-			.gpio     = hauppauge_wintv_hvr_900_analog,
+			.gpio     = kworld_330u_analog,
+			.aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
-			.gpio     = hauppauge_wintv_hvr_900_analog,
+			.gpio     = kworld_330u_analog,
 		} },
 	},
 	[EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
@@ -1249,7 +1265,7 @@ struct usb_device_id em28xx_id_table [] = {
 	{ USB_DEVICE(0xeb1a, 0xe310),
 			.driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
 	{ USB_DEVICE(0xeb1a, 0xa316),
-			.driver_info = EM2883_BOARD_KWORLD_HYBRID_A316 },
+			.driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
 	{ USB_DEVICE(0xeb1a, 0xe320),
 			.driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
 	{ USB_DEVICE(0xeb1a, 0xe323),
@@ -1526,6 +1542,10 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
 		/* FIXME: Better to specify the needed IF */
 		ctl->demod = XC3028_FE_DEFAULT;
 		break;
+	case EM2883_BOARD_KWORLD_HYBRID_330U:
+		ctl->demod = XC3028_FE_CHINA;
+		ctl->fname = XC2028_DEFAULT_FIRMWARE;
+		break;
 	default:
 		ctl->demod = XC3028_FE_OREN538;
 	}
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index eb5fb05fab2..94fb1b639a2 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -438,6 +438,10 @@ int em28xx_audio_analog_set(struct em28xx *dev)
 	if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
 		int vol;
 
+		em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200);
+		em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031);
+		em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80);
+
 		/* LSB: left channel - both channels with the same level */
 		vol = (0x1f - dev->volume) | ((0x1f - dev->volume) << 8);
 
@@ -454,6 +458,15 @@ int em28xx_audio_analog_set(struct em28xx *dev)
 				em28xx_warn("couldn't setup AC97 register %d\n",
 				     outputs[i].reg);
 		}
+
+		if (dev->ctl_aoutput & EM28XX_AOUT_PCM_IN) {
+			int sel = ac97_return_record_select(dev->ctl_aoutput);
+
+			/* Use the same input for both left and right channels */
+			sel |= (sel << 8);
+
+			em28xx_write_ac97(dev, AC97_RECORD_SELECT, sel);
+		}
 	}
 
 	return ret;
@@ -847,8 +860,11 @@ void em28xx_uninit_isoc(struct em28xx *dev)
 	for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
 		urb = dev->isoc_ctl.urb[i];
 		if (urb) {
-			usb_kill_urb(urb);
-			usb_unlink_urb(urb);
+			if (!irqs_disabled())
+				usb_kill_urb(urb);
+			else
+				usb_unlink_urb(urb);
+
 			if (dev->isoc_ctl.transfer_buffer[i]) {
 				usb_buffer_free(dev->udev,
 					urb->transfer_buffer_length,
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index d38cb21834d..9ad8527b3fd 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -28,6 +28,7 @@
 
 #include "lgdt330x.h"
 #include "zl10353.h"
+#include "s5h1409.h"
 #ifdef EM28XX_DRX397XD_SUPPORT
 #include "drx397xD.h"
 #endif
@@ -232,6 +233,15 @@ static struct zl10353_config em28xx_zl10353_with_xc3028 = {
 	.if2 = 45600,
 };
 
+static struct s5h1409_config em28xx_s5h1409_with_xc3028 = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_PARALLEL_OUTPUT,
+	.gpio          = S5H1409_GPIO_OFF,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
+};
+
 #ifdef EM28XX_DRX397XD_SUPPORT
 /* [TODO] djh - not sure yet what the device config needs to contain */
 static struct drx397xD_config em28xx_drx397xD_with_xc3028 = {
@@ -412,7 +422,6 @@ static int dvb_init(struct em28xx *dev)
 	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
 	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
 	case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
-	case EM2883_BOARD_KWORLD_HYBRID_A316:
 	case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
 		dvb->frontend = dvb_attach(lgdt330x_attach,
 					   &em2880_lgdt3303_dev,
@@ -433,6 +442,15 @@ static int dvb_init(struct em28xx *dev)
 			goto out_free;
 		}
 		break;
+	case EM2883_BOARD_KWORLD_HYBRID_330U:
+		dvb->frontend = dvb_attach(s5h1409_attach,
+					   &em28xx_s5h1409_with_xc3028,
+					   &dev->i2c_adap);
+		if (attach_xc3028(0x61, dev) < 0) {
+			result = -EINVAL;
+			goto out_free;
+		}
+		break;
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
 #ifdef EM28XX_DRX397XD_SUPPORT
 		/* We don't have the config structure properly populated, so
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 416b691c33c..8e61b2ca916 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -886,10 +886,10 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
 	if (0 == INPUT(i)->type)
 		return -EINVAL;
 
-	mutex_lock(&dev->lock);
-
-	video_mux(dev, i);
+	dev->ctl_input = i;
 
+	mutex_lock(&dev->lock);
+	video_mux(dev, dev->ctl_input);
 	mutex_unlock(&dev->lock);
 	return 0;
 }
@@ -939,6 +939,12 @@ static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a)
 	struct em28xx_fh   *fh  = priv;
 	struct em28xx      *dev = fh->dev;
 
+
+	if (a->index >= MAX_EM28XX_INPUT)
+		return -EINVAL;
+	if (0 == INPUT(a->index)->type)
+		return -EINVAL;
+
 	mutex_lock(&dev->lock);
 
 	dev->ctl_ainput = INPUT(a->index)->amux;
@@ -1950,6 +1956,7 @@ static struct video_device *em28xx_vdev_init(struct em28xx *dev,
 
 int em28xx_register_analog_devices(struct em28xx *dev)
 {
+      u8 val;
 	int ret;
 
 	printk(KERN_INFO "%s: v4l2 driver version %d.%d.%d\n",
@@ -1957,34 +1964,34 @@ int em28xx_register_analog_devices(struct em28xx *dev)
 		(EM28XX_VERSION_CODE >> 16) & 0xff,
 		(EM28XX_VERSION_CODE >> 8) & 0xff, EM28XX_VERSION_CODE & 0xff);
 
+	/* set default norm */
+	dev->norm = em28xx_video_template.current_norm;
+	dev->width = norm_maxw(dev);
+	dev->height = norm_maxh(dev);
+	dev->interlaced = EM28XX_INTERLACED_DEFAULT;
+	dev->hscale = 0;
+	dev->vscale = 0;
+	dev->ctl_input = 0;
+
 	/* Analog specific initialization */
 	dev->format = &format[0];
-	video_mux(dev, 0);
+	video_mux(dev, dev->ctl_input);
+
+	/* Audio defaults */
+	dev->mute = 1;
+	dev->volume = 0x1f;
 
 	/* enable vbi capturing */
 
 /*	em28xx_write_reg(dev, EM28XX_R0E_AUDIOSRC, 0xc0); audio register */
-/*	em28xx_write_reg(dev, EM28XX_R0F_XCLK, 0x80); clk register */
+       val = (u8)em28xx_read_reg(dev, EM28XX_R0F_XCLK);
+       em28xx_write_reg(dev, EM28XX_R0F_XCLK, (EM28XX_XCLK_AUDIO_UNMUTE | val));
 	em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x51);
 
-	dev->mute = 1;		/* maybe not the right place... */
-	dev->volume = 0x1f;
-
 	em28xx_set_outfmt(dev);
 	em28xx_colorlevels_set_default(dev);
 	em28xx_compression_disable(dev);
 
-	/* set default norm */
-	dev->norm = em28xx_video_template.current_norm;
-	dev->width = norm_maxw(dev);
-	dev->height = norm_maxh(dev);
-	dev->interlaced = EM28XX_INTERLACED_DEFAULT;
-	dev->hscale = 0;
-	dev->vscale = 0;
-
-	/* FIXME: This is a very bad hack! Not all devices have TV on input 2 */
-	dev->ctl_input = 2;
-
 	/* allocate and fill video video_device struct */
 	dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
 	if (!dev->vdev) {
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 6c6b94aa05b..dd2cd36fb1b 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -94,7 +94,7 @@
 #define EM2882_BOARD_KWORLD_VS_DVBT		  54
 #define EM2882_BOARD_TERRATEC_HYBRID_XS		  55
 #define EM2882_BOARD_PINNACLE_HYBRID_PRO	  56
-#define EM2883_BOARD_KWORLD_HYBRID_A316		  57
+#define EM2883_BOARD_KWORLD_HYBRID_330U                  57
 #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU	  58
 #define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850	  60
 #define EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2	  61
@@ -300,13 +300,32 @@ enum em28xx_amux {
 };
 
 enum em28xx_aout {
+	/* AC97 outputs */
 	EM28XX_AOUT_MASTER = 1 << 0,
 	EM28XX_AOUT_LINE   = 1 << 1,
 	EM28XX_AOUT_MONO   = 1 << 2,
 	EM28XX_AOUT_LFE    = 1 << 3,
 	EM28XX_AOUT_SURR   = 1 << 4,
+
+	/* PCM IN Mixer - used by AC97_RECORD_SELECT register */
+	EM28XX_AOUT_PCM_IN = 1 << 7,
+
+	/* Bits 10-8 are used to indicate the PCM IN record select */
+	EM28XX_AOUT_PCM_MIC_PCM = 0 << 8,
+	EM28XX_AOUT_PCM_CD	= 1 << 8,
+	EM28XX_AOUT_PCM_VIDEO	= 2 << 8,
+	EM28XX_AOUT_PCM_AUX	= 3 << 8,
+	EM28XX_AOUT_PCM_LINE	= 4 << 8,
+	EM28XX_AOUT_PCM_STEREO	= 5 << 8,
+	EM28XX_AOUT_PCM_MONO	= 6 << 8,
+	EM28XX_AOUT_PCM_PHONE	= 7 << 8,
 };
 
+static inline int ac97_return_record_select(int a_out)
+{
+	return (a_out & 0x700) >> 8;
+}
+
 struct em28xx_reg_seq {
 	int reg;
 	unsigned char val, mask;
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 5e36b9a4ae3..2ed24527ecd 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -423,7 +423,8 @@ static void destroy_urbs(struct gspca_dev *gspca_dev)
 			break;
 
 		gspca_dev->urb[i] = NULL;
-		usb_kill_urb(urb);
+		if (!gspca_dev->present)
+			usb_kill_urb(urb);
 		if (urb->transfer_buffer != NULL)
 			usb_buffer_free(gspca_dev->dev,
 					urb->transfer_buffer_length,
@@ -1950,7 +1951,6 @@ void gspca_disconnect(struct usb_interface *intf)
 	struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
 
 	gspca_dev->present = 0;
-	gspca_dev->streaming = 0;
 
 	usb_set_intfdata(intf, NULL);
 
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index e8e5921cdc3..c46c990987f 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -949,8 +949,10 @@ static int __devinit ivtv_probe(struct pci_dev *dev,
 	itv->instance = atomic_inc_return(&ivtv_instance) - 1;
 
 	retval = v4l2_device_register(&dev->dev, &itv->device);
-	if (retval)
+	if (retval) {
+		kfree(itv);
 		return retval;
+	}
 	/* "ivtv + PCI ID" is a bit of a mouthful, so use
 	   "ivtv + instance" instead. */
 	snprintf(itv->device.name, sizeof(itv->device.name),
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 39fbc970f43..0d810189dd8 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -62,7 +62,6 @@
 #include <linux/poll.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
-#include <linux/version.h>
 #include <asm/io.h>
 
 #include "pwc.h"
diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c
index d6848f7a503..05221d47dd4 100644
--- a/drivers/media/video/saa7127.c
+++ b/drivers/media/video/saa7127.c
@@ -149,7 +149,7 @@ static const struct i2c_reg_value saa7127_init_config_common[] = {
 	{ SAA7127_REG_COPYGEN_0, 			0x77 },
 	{ SAA7127_REG_COPYGEN_1, 			0x41 },
 	{ SAA7127_REG_COPYGEN_2, 			0x00 },	/* Macrovision enable/disable */
-	{ SAA7127_REG_OUTPUT_PORT_CONTROL, 		0x9e },
+	{ SAA7127_REG_OUTPUT_PORT_CONTROL, 		0xbf },
 	{ SAA7127_REG_GAIN_LUMINANCE_RGB, 		0x00 },
 	{ SAA7127_REG_GAIN_COLORDIFF_RGB, 		0x00 },
 	{ SAA7127_REG_INPUT_PORT_CONTROL_1, 		0x80 },	/* for color bars */
@@ -488,12 +488,18 @@ static int saa7127_set_output_type(struct v4l2_subdev *sd, int output)
 		break;
 
 	case SAA7127_OUTPUT_TYPE_COMPOSITE:
-		state->reg_2d = 0x08;	/* 00001000 CVBS only, RGB DAC's off (high impedance mode) */
+		if (state->ident == V4L2_IDENT_SAA7129)
+			state->reg_2d = 0x20;	/* CVBS only */
+		else
+			state->reg_2d = 0x08;	/* 00001000 CVBS only, RGB DAC's off (high impedance mode) */
 		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
 		break;
 
 	case SAA7127_OUTPUT_TYPE_SVIDEO:
-		state->reg_2d = 0xff;	/* 11111111  croma -> R, luma -> CVBS + G + B */
+		if (state->ident == V4L2_IDENT_SAA7129)
+			state->reg_2d = 0x18;	/* Y + C */
+		else
+			state->reg_2d = 0xff;   /*11111111  croma -> R, luma -> CVBS + G + B */
 		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
 		break;
 
@@ -508,7 +514,10 @@ static int saa7127_set_output_type(struct v4l2_subdev *sd, int output)
 		break;
 
 	case SAA7127_OUTPUT_TYPE_BOTH:
-		state->reg_2d = 0xbf;
+		if (state->ident == V4L2_IDENT_SAA7129)
+			state->reg_2d = 0x38;
+		else
+			state->reg_2d = 0xbf;
 		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
 		break;
 
@@ -731,24 +740,6 @@ static int saa7127_probe(struct i2c_client *client,
 		return -ENODEV;
 	}
 
-	/* Configure Encoder */
-
-	v4l2_dbg(1, debug, sd, "Configuring encoder\n");
-	saa7127_write_inittab(sd, saa7127_init_config_common);
-	saa7127_set_std(sd, V4L2_STD_NTSC);
-	saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH);
-	saa7127_set_vps(sd, &vbi);
-	saa7127_set_wss(sd, &vbi);
-	saa7127_set_cc(sd, &vbi);
-	saa7127_set_xds(sd, &vbi);
-	if (test_image == 1)
-		/* The Encoder has an internal Colorbar generator */
-		/* This can be used for debugging */
-		saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE);
-	else
-		saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL);
-	saa7127_set_video_enable(sd, 1);
-
 	if (id->driver_data) {	/* Chip type is already known */
 		state->ident = id->driver_data;
 	} else {		/* Needs detection */
@@ -770,6 +761,23 @@ static int saa7127_probe(struct i2c_client *client,
 
 	v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
 			client->addr << 1, client->adapter->name);
+
+	v4l2_dbg(1, debug, sd, "Configuring encoder\n");
+	saa7127_write_inittab(sd, saa7127_init_config_common);
+	saa7127_set_std(sd, V4L2_STD_NTSC);
+	saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH);
+	saa7127_set_vps(sd, &vbi);
+	saa7127_set_wss(sd, &vbi);
+	saa7127_set_cc(sd, &vbi);
+	saa7127_set_xds(sd, &vbi);
+	if (test_image == 1)
+		/* The Encoder has an internal Colorbar generator */
+		/* This can be used for debugging */
+		saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE);
+	else
+		saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL);
+	saa7127_set_video_enable(sd, 1);
+
 	if (state->ident == V4L2_IDENT_SAA7129)
 		saa7127_write_inittab(sd, saa7129_init_config_extra);
 	return 0;
diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c
index 26194a0ce92..c750d3dd57d 100644
--- a/drivers/media/video/saa7134/saa7134-alsa.c
+++ b/drivers/media/video/saa7134/saa7134-alsa.c
@@ -1089,7 +1089,11 @@ static int saa7134_alsa_init(void)
 
 	list_for_each(list,&saa7134_devlist) {
 		dev = list_entry(list, struct saa7134_dev, devlist);
-		alsa_device_init(dev);
+		if (dev->pci->device == PCI_DEVICE_ID_PHILIPS_SAA7130)
+			printk(KERN_INFO "%s/alsa: %s doesn't support digital audio\n",
+				dev->name, saa7134_boards[dev->board].name);
+		else
+			alsa_device_init(dev);
 	}
 
 	if (dev == NULL)
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index dfbe08a9ad9..99221d726ed 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -660,6 +660,10 @@ static int saa7134_hwinit1(struct saa7134_dev *dev)
 
 	saa_writel(SAA7134_IRQ1, 0);
 	saa_writel(SAA7134_IRQ2, 0);
+
+	/* Clear any stale IRQ reports */
+	saa_writel(SAA7134_IRQ_REPORT, saa_readl(SAA7134_IRQ_REPORT));
+
 	mutex_init(&dev->lock);
 	spin_lock_init(&dev->slock);
 
diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c
index 454ad1dd750..88c5e942f75 100644
--- a/drivers/media/video/saa717x.c
+++ b/drivers/media/video/saa717x.c
@@ -30,7 +30,6 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c
index 56f0c0eb500..00c6cbe06ab 100644
--- a/drivers/media/video/tda9875.c
+++ b/drivers/media/video/tda9875.c
@@ -242,7 +242,7 @@ static int tda9875_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 static int tda9875_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
 	struct tda9875 *t = to_state(sd);
-	int chvol=0, volume, balance, left, right;
+	int chvol = 0, volume = 0, balance = 0, left, right;
 
 	switch (ctrl->id) {
 	case V4L2_CID_AUDIO_VOLUME:
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 3b0b84c2e45..78277abb733 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -427,6 +427,9 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
 	const char *t_fmt_name2[8] = { " none", "", "", "", "", "", "", "" };
 
 	memset(tvee, 0, sizeof(*tvee));
+	tvee->tuner_type = TUNER_ABSENT;
+	tvee->tuner2_type = TUNER_ABSENT;
+
 	done = len = beenhere = 0;
 
 	/* Different eeprom start offsets for em28xx, cx2388x and cx23418 */
diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c
index ac9aa40d09f..8e23aa53c29 100644
--- a/drivers/media/video/tvp514x.c
+++ b/drivers/media/video/tvp514x.c
@@ -1401,7 +1401,7 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	decoder->pdata = client->dev.platform_data;
 	if (!decoder->pdata) {
-		v4l_err(client, "No platform data\n!!");
+		v4l_err(client, "No platform data!!\n");
 		return -ENODEV;
 	}
 	/*
diff --git a/drivers/media/video/upd64031a.c b/drivers/media/video/upd64031a.c
index 4f16effb530..f4522bb0891 100644
--- a/drivers/media/video/upd64031a.c
+++ b/drivers/media/video/upd64031a.c
@@ -21,7 +21,6 @@
  */
 
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/i2c.h>
diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c
index 4b712f69d1b..a5fb74bf240 100644
--- a/drivers/media/video/upd64083.c
+++ b/drivers/media/video/upd64083.c
@@ -21,7 +21,6 @@
  * 02110-1301, USA.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/i2c.h>
diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c
index 9907b9aff2b..6b66ae4f430 100644
--- a/drivers/media/video/usbvision/usbvision-i2c.c
+++ b/drivers/media/video/usbvision/usbvision-i2c.c
@@ -157,7 +157,7 @@ usbvision_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
 	struct i2c_msg *pmsg;
 	struct usb_usbvision *usbvision;
 	int i, ret;
-	unsigned char addr;
+	unsigned char addr = 0;
 
 	usbvision = (struct usb_usbvision *)i2c_get_adapdata(i2c_adap);
 
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index 2208165aa6f..d2576f6391c 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -1,7 +1,7 @@
 /*
  *      uvc_ctrl.c  --  USB Video Class driver - Controls
  *
- *      Copyright (C) 2005-2008
+ *      Copyright (C) 2005-2009
  *          Laurent Pinchart (laurent.pinchart@skynet.be)
  *
  *      This program is free software; you can redistribute it and/or modify
@@ -12,7 +12,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/uaccess.h>
@@ -29,7 +28,7 @@
 #define UVC_CTRL_DATA_BACKUP	1
 
 /* ------------------------------------------------------------------------
- * Control, formats, ...
+ * Controls
  */
 
 static struct uvc_control_info uvc_ctrls[] = {
@@ -635,7 +634,7 @@ static __s32 uvc_get_le_value(struct uvc_control_mapping *mapping,
 		mask = (1 << bits) - 1;
 	}
 
-	/* Sign-extend the value if needed */
+	/* Sign-extend the value if needed. */
 	if (mapping->data_type == UVC_CTRL_DATA_TYPE_SIGNED)
 		value |= -(value & (1 << (mapping->size - 1)));
 
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index 89d8bd10a85..b12873265cc 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -1,7 +1,7 @@
 /*
  *      uvc_driver.c  --  USB Video Class driver
  *
- *      Copyright (C) 2005-2008
+ *      Copyright (C) 2005-2009
  *          Laurent Pinchart (laurent.pinchart@skynet.be)
  *
  *      This program is free software; you can redistribute it and/or modify
@@ -24,7 +24,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/usb.h>
@@ -49,7 +48,7 @@ static unsigned int uvc_quirks_param;
 unsigned int uvc_trace_param;
 
 /* ------------------------------------------------------------------------
- * Control, formats, ...
+ * Video formats
  */
 
 static struct uvc_format_desc uvc_fmts[] = {
@@ -474,7 +473,7 @@ static int uvc_parse_format(struct uvc_device *dev,
 
 		/* Several UVC chipsets screw up dwMaxVideoFrameBufferSize
 		 * completely. Observed behaviours range from setting the
-		 * value to 1.1x the actual frame size of hardwiring the
+		 * value to 1.1x the actual frame size to hardwiring the
 		 * 16 low bits to 0. This results in a higher than necessary
 		 * memory usage as well as a wrong image size information. For
 		 * uncompressed formats this can be fixed by computing the
@@ -487,7 +486,7 @@ static int uvc_parse_format(struct uvc_device *dev,
 		/* Some bogus devices report dwMinFrameInterval equal to
 		 * dwMaxFrameInterval and have dwFrameIntervalStep set to
 		 * zero. Setting all null intervals to 1 fixes the problem and
-		 * some other divisions by zero which could happen.
+		 * some other divisions by zero that could happen.
 		 */
 		for (i = 0; i < n; ++i) {
 			interval = get_unaligned_le32(&buffer[26+4*i]);
@@ -1200,13 +1199,13 @@ static void uvc_unregister_video(struct uvc_device *dev)
  * Scan the UVC descriptors to locate a chain starting at an Output Terminal
  * and containing the following units:
  *
- * - a USB Streaming Output Terminal
+ * - one Output Terminal (USB Streaming or Display)
  * - zero or one Processing Unit
  * - zero, one or mode single-input Selector Units
  * - zero or one multiple-input Selector Units, provided all inputs are
  *   connected to input terminals
  * - zero, one or mode single-input Extension Units
- * - one Camera Input Terminal, or one or more External terminals.
+ * - one or more Input Terminals (Camera, External or USB Streaming)
  *
  * A side forward scan is made on each detected entity to check for additional
  * extension units.
@@ -1531,10 +1530,6 @@ static int uvc_register_video(struct uvc_device *dev)
 
 	/* Set the driver data before calling video_register_device, otherwise
 	 * uvc_v4l2_open might race us.
-	 *
-	 * FIXME: usb_set_intfdata hasn't been called so far. Is that a
-	 * 	  problem ? Does any function which could be called here get
-	 * 	  a pointer to the usb_interface ?
 	 */
 	dev->video.vdev = vdev;
 	video_set_drvdata(vdev, &dev->video);
@@ -1569,7 +1564,7 @@ void uvc_delete(struct kref *kref)
 	struct uvc_device *dev = container_of(kref, struct uvc_device, kref);
 	struct list_head *p, *n;
 
-	/* Unregister the video device */
+	/* Unregister the video device. */
 	uvc_unregister_video(dev);
 	usb_put_intf(dev->intf);
 	usb_put_dev(dev->udev);
@@ -1612,7 +1607,7 @@ static int uvc_probe(struct usb_interface *intf,
 		uvc_trace(UVC_TRACE_PROBE, "Probing generic UVC device %s\n",
 				udev->devpath);
 
-	/* Allocate memory for the device and initialize it */
+	/* Allocate memory for the device and initialize it. */
 	if ((dev = kzalloc(sizeof *dev, GFP_KERNEL)) == NULL)
 		return -ENOMEM;
 
@@ -1633,14 +1628,14 @@ static int uvc_probe(struct usb_interface *intf,
 			le16_to_cpu(udev->descriptor.idVendor),
 			le16_to_cpu(udev->descriptor.idProduct));
 
-	/* Parse the Video Class control descriptor */
+	/* Parse the Video Class control descriptor. */
 	if (uvc_parse_control(dev) < 0) {
 		uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC "
 			"descriptors.\n");
 		goto error;
 	}
 
-	uvc_printk(KERN_INFO, "Found UVC %u.%02u device %s (%04x:%04x)\n",
+	uvc_printk(KERN_INFO, "Found UVC %u.%02x device %s (%04x:%04x)\n",
 		dev->uvc_version >> 8, dev->uvc_version & 0xff,
 		udev->product ? udev->product : "<unnamed>",
 		le16_to_cpu(udev->descriptor.idVendor),
@@ -1653,18 +1648,18 @@ static int uvc_probe(struct usb_interface *intf,
 			"linux-uvc-devel mailing list.\n");
 	}
 
-	/* Initialize controls */
+	/* Initialize controls. */
 	if (uvc_ctrl_init_device(dev) < 0)
 		goto error;
 
-	/* Register the video devices */
+	/* Register the video devices. */
 	if (uvc_register_video(dev) < 0)
 		goto error;
 
-	/* Save our data pointer in the interface data */
+	/* Save our data pointer in the interface data. */
 	usb_set_intfdata(intf, dev);
 
-	/* Initialize the interrupt URB */
+	/* Initialize the interrupt URB. */
 	if ((ret = uvc_status_init(dev)) < 0) {
 		uvc_printk(KERN_INFO, "Unable to initialize the status "
 			"endpoint (%d), status interrupt will not be "
@@ -1839,24 +1834,24 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0 },
 	/* Apple Built-In iSight */
-	{ .match_flags          = USB_DEVICE_ID_MATCH_DEVICE
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
 	  .idVendor		= 0x05ac,
 	  .idProduct		= 0x8501,
-	  .bInterfaceClass      = USB_CLASS_VIDEO,
-	  .bInterfaceSubClass   = 1,
-	  .bInterfaceProtocol   = 0,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
 	  .driver_info 		= UVC_QUIRK_PROBE_MINMAX
 				| UVC_QUIRK_BUILTIN_ISIGHT },
 	/* Genesys Logic USB 2.0 PC Camera */
-	{ .match_flags          = USB_DEVICE_ID_MATCH_DEVICE
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
-	  .idVendor             = 0x05e3,
-	  .idProduct            = 0x0505,
-	  .bInterfaceClass      = USB_CLASS_VIDEO,
-	  .bInterfaceSubClass   = 1,
-	  .bInterfaceProtocol   = 0,
-	  .driver_info          = UVC_QUIRK_STREAM_NO_FID },
+	  .idVendor		= 0x05e3,
+	  .idProduct		= 0x0505,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_STREAM_NO_FID },
 	/* MT6227 */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
diff --git a/drivers/media/video/uvc/uvc_isight.c b/drivers/media/video/uvc/uvc_isight.c
index 37bdefdbead..436f462685a 100644
--- a/drivers/media/video/uvc/uvc_isight.c
+++ b/drivers/media/video/uvc/uvc_isight.c
@@ -3,6 +3,8 @@
  *
  *	Copyright (C) 2006-2007
  *		Ivan N. Zlatev <contact@i-nz.net>
+ *	Copyright (C) 2008-2009
+ *		Laurent Pinchart <laurent.pinchart@skynet.be>
  *
  *      This program is free software; you can redistribute it and/or modify
  *      it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c
index 42546342e97..0155752e4a5 100644
--- a/drivers/media/video/uvc/uvc_queue.c
+++ b/drivers/media/video/uvc/uvc_queue.c
@@ -1,7 +1,7 @@
 /*
  *      uvc_queue.c  --  USB Video Class driver - Buffers management
  *
- *      Copyright (C) 2005-2008
+ *      Copyright (C) 2005-2009
  *          Laurent Pinchart (laurent.pinchart@skynet.be)
  *
  *      This program is free software; you can redistribute it and/or modify
@@ -12,7 +12,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/mm.h>
 #include <linux/list.h>
 #include <linux/module.h>
@@ -37,22 +36,22 @@
  * to user space will return -EBUSY.
  *
  * Video buffers are managed using two queues. However, unlike most USB video
- * drivers which use an in queue and an out queue, we use a main queue which
- * holds all queued buffers (both 'empty' and 'done' buffers), and an irq
- * queue which holds empty buffers. This design (copied from video-buf)
- * minimizes locking in interrupt, as only one queue is shared between
- * interrupt and user contexts.
+ * drivers that use an in queue and an out queue, we use a main queue to hold
+ * all queued buffers (both 'empty' and 'done' buffers), and an irq queue to
+ * hold empty buffers. This design (copied from video-buf) minimizes locking
+ * in interrupt, as only one queue is shared between interrupt and user
+ * contexts.
  *
  * Use cases
  * ---------
  *
- * Unless stated otherwise, all operations which modify the irq buffers queue
+ * Unless stated otherwise, all operations that modify the irq buffers queue
  * are protected by the irq spinlock.
  *
  * 1. The user queues the buffers, starts streaming and dequeues a buffer.
  *
  *    The buffers are added to the main and irq queues. Both operations are
- *    protected by the queue lock, and the latert is protected by the irq
+ *    protected by the queue lock, and the later is protected by the irq
  *    spinlock as well.
  *
  *    The completion handler fetches a buffer from the irq queue and fills it
@@ -60,7 +59,7 @@
  *    returns immediately.
  *
  *    When the buffer is full, the completion handler removes it from the irq
- *    queue, marks it as ready (UVC_BUF_STATE_DONE) and wake its wait queue.
+ *    queue, marks it as ready (UVC_BUF_STATE_DONE) and wakes its wait queue.
  *    At that point, any process waiting on the buffer will be woken up. If a
  *    process tries to dequeue a buffer after it has been marked ready, the
  *    dequeing will succeed immediately.
@@ -91,8 +90,8 @@ void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type)
 /*
  * Allocate the video buffers.
  *
- * Pages are reserved to make sure they will not be swaped, as they will be
- * filled in URB completion handler.
+ * Pages are reserved to make sure they will not be swapped, as they will be
+ * filled in the URB completion handler.
  *
  * Buffers will be individually mapped, so they must all be page aligned.
  */
@@ -210,8 +209,8 @@ int uvc_query_buffer(struct uvc_video_queue *queue,
 	__uvc_query_buffer(&queue->buffer[v4l2_buf->index], v4l2_buf);
 
 done:
-       mutex_unlock(&queue->mutex);
-       return ret;
+	mutex_unlock(&queue->mutex);
+	return ret;
 }
 
 /*
@@ -236,7 +235,7 @@ int uvc_queue_buffer(struct uvc_video_queue *queue,
 	}
 
 	mutex_lock(&queue->mutex);
-	if (v4l2_buf->index >= queue->count)  {
+	if (v4l2_buf->index >= queue->count) {
 		uvc_trace(UVC_TRACE_CAPTURE, "[E] Out of range index.\n");
 		ret = -EINVAL;
 		goto done;
@@ -429,7 +428,7 @@ done:
  * Cancel the video buffers queue.
  *
  * Cancelling the queue marks all buffers on the irq queue as erroneous,
- * wakes them up and remove them from the queue.
+ * wakes them up and removes them from the queue.
  *
  * If the disconnect parameter is set, further calls to uvc_queue_buffer will
  * fail with -ENODEV.
diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c
index 5d60b264d59..c1e4ae27c61 100644
--- a/drivers/media/video/uvc/uvc_status.c
+++ b/drivers/media/video/uvc/uvc_status.c
@@ -1,7 +1,7 @@
 /*
  *      uvc_status.c  --  USB Video Class driver - Status endpoint
  *
- *      Copyright (C) 2007-2008
+ *      Copyright (C) 2007-2009
  *          Laurent Pinchart (laurent.pinchart@skynet.be)
  *
  *      This program is free software; you can redistribute it and/or modify
@@ -12,7 +12,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/input.h>
 #include <linux/usb.h>
 #include <linux/usb/input.h>
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
index fa150fff2c1..d681519d0c8 100644
--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -1,7 +1,7 @@
 /*
  *      uvc_v4l2.c  --  USB Video Class driver - V4L2 API
  *
- *      Copyright (C) 2005-2008
+ *      Copyright (C) 2005-2009
  *          Laurent Pinchart (laurent.pinchart@skynet.be)
  *
  *      This program is free software; you can redistribute it and/or modify
@@ -37,7 +37,7 @@
  * must be grouped (for instance the Red Balance, Blue Balance and Do White
  * Balance V4L2 controls use the White Balance Component UVC control) or
  * otherwise translated. The approach we take here is to use a translation
- * table for the controls which can be mapped directly, and handle the others
+ * table for the controls that can be mapped directly, and handle the others
  * manually.
  */
 static int uvc_v4l2_query_menu(struct uvc_video_device *video,
@@ -189,7 +189,7 @@ static int uvc_v4l2_try_format(struct uvc_video_device *video,
 		probe->dwMaxVideoFrameSize =
 			video->streaming->ctrl.dwMaxVideoFrameSize;
 
-	/* Probe the device */
+	/* Probe the device. */
 	if ((ret = uvc_probe_video(video, probe)) < 0)
 		goto done;
 
@@ -354,11 +354,11 @@ static int uvc_v4l2_set_streamparm(struct uvc_video_device *video,
  *
  * Each open instance of a UVC device can either be in a privileged or
  * unprivileged state. Only a single instance can be in a privileged state at
- * a given time. Trying to perform an operation which requires privileges will
+ * a given time. Trying to perform an operation that requires privileges will
  * automatically acquire the required privileges if possible, or return -EBUSY
  * otherwise. Privileges are dismissed when closing the instance.
  *
- * Operations which require privileges are:
+ * Operations that require privileges are:
  *
  * - VIDIOC_S_INPUT
  * - VIDIOC_S_PARM
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index e7c31995527..9bc4705be78 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -1,7 +1,7 @@
 /*
  *      uvc_video.c  --  USB Video Class driver - Video handling
  *
- *      Copyright (C) 2005-2008
+ *      Copyright (C) 2005-2009
  *          Laurent Pinchart (laurent.pinchart@skynet.be)
  *
  *      This program is free software; you can redistribute it and/or modify
@@ -12,7 +12,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/usb.h>
@@ -115,7 +114,7 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video,
 		ctrl->wCompQuality = le16_to_cpup((__le16 *)data);
 		ret = 0;
 		goto out;
-	} else if (query == GET_DEF && probe == 1) {
+	} else if (query == GET_DEF && probe == 1 && ret != size) {
 		/* Many cameras don't support the GET_DEF request on their
 		 * video probe control. Warn once and return, the caller will
 		 * fall back to GET_CUR.
@@ -160,7 +159,7 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video,
 	}
 
 	/* Some broken devices return a null or wrong dwMaxVideoFrameSize.
-	 * Try to get the value from the format and frame descriptor.
+	 * Try to get the value from the format and frame descriptors.
 	 */
 	uvc_fixup_buffer_size(video, ctrl);
 	ret = 0;
@@ -191,9 +190,6 @@ static int uvc_set_video_ctrl(struct uvc_video_device *video,
 	*(__le16 *)&data[12] = cpu_to_le16(ctrl->wCompQuality);
 	*(__le16 *)&data[14] = cpu_to_le16(ctrl->wCompWindowSize);
 	*(__le16 *)&data[16] = cpu_to_le16(ctrl->wDelay);
-	/* Note: Some of the fields below are not required for IN devices (see
-	 * UVC spec, 4.3.1.1), but we still copy them in case support for OUT
-	 * devices is added in the future. */
 	put_unaligned_le32(ctrl->dwMaxVideoFrameSize, &data[18]);
 	put_unaligned_le32(ctrl->dwMaxPayloadTransferSize, &data[22]);
 
@@ -400,7 +396,7 @@ static int uvc_video_decode_start(struct uvc_video_device *video,
 	 *
 	 * Empty buffers (bytesused == 0) don't trigger end of frame detection
 	 * as it doesn't make sense to return an empty buffer. This also
-	 * avoids detecting and of frame conditions at FID toggling if the
+	 * avoids detecting end of frame conditions at FID toggling if the
 	 * previous payload had the EOF bit set.
 	 */
 	if (fid != video->last_fid && buf->buf.bytesused != 0) {
@@ -453,6 +449,17 @@ static void uvc_video_decode_end(struct uvc_video_device *video,
 	}
 }
 
+/* Video payload encoding is handled by uvc_video_encode_header() and
+ * uvc_video_encode_data(). Only bulk transfers are currently supported.
+ *
+ * uvc_video_encode_header is called at the start of a payload. It adds header
+ * data to the transfer buffer and returns the header size. As the only known
+ * UVC output device transfers a whole frame in a single payload, the EOF bit
+ * is always set in the header.
+ *
+ * uvc_video_encode_data is called for every URB and copies the data from the
+ * video buffer to the transfer buffer.
+ */
 static int uvc_video_encode_header(struct uvc_video_device *video,
 		struct uvc_buffer *buf, __u8 *data, int len)
 {
@@ -953,7 +960,7 @@ int uvc_video_suspend(struct uvc_video_device *video)
 }
 
 /*
- * Reconfigure the video interface and restart streaming if it was enable
+ * Reconfigure the video interface and restart streaming if it was enabled
  * before suspend.
  *
  * If an error occurs, disable the video queue. This will wake all pending
@@ -985,8 +992,8 @@ int uvc_video_resume(struct uvc_video_device *video)
  */
 
 /*
- * Initialize the UVC video device by retrieving the default format and
- * committing it.
+ * Initialize the UVC video device by switching to alternate setting 0 and
+ * retrieve the default format.
  *
  * Some cameras (namely the Fuji Finepix) set the format and frame
  * indexes to zero. The UVC standard doesn't clearly make this a spec
@@ -1014,7 +1021,7 @@ int uvc_video_init(struct uvc_video_device *video)
 	 */
 	usb_set_interface(video->dev->udev, video->streaming->intfnum, 0);
 
-	/* Some webcams don't suport GET_DEF request on the probe control. We
+	/* Some webcams don't suport GET_DEF requests on the probe control. We
 	 * fall back to GET_CUR if GET_DEF fails.
 	 */
 	if ((ret = uvc_get_video_ctrl(video, probe, 1, GET_DEF)) < 0 &&
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index bcf4361dc1b..027947ea9b6 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -72,149 +72,149 @@ struct uvc_xu_control {
  * UVC constants
  */
 
-#define SC_UNDEFINED                    0x00
-#define SC_VIDEOCONTROL                 0x01
-#define SC_VIDEOSTREAMING               0x02
-#define SC_VIDEO_INTERFACE_COLLECTION   0x03
+#define SC_UNDEFINED			0x00
+#define SC_VIDEOCONTROL			0x01
+#define SC_VIDEOSTREAMING		0x02
+#define SC_VIDEO_INTERFACE_COLLECTION	0x03
 
-#define PC_PROTOCOL_UNDEFINED           0x00
+#define PC_PROTOCOL_UNDEFINED		0x00
 
-#define CS_UNDEFINED                    0x20
-#define CS_DEVICE                       0x21
-#define CS_CONFIGURATION                0x22
-#define CS_STRING                       0x23
-#define CS_INTERFACE                    0x24
-#define CS_ENDPOINT                     0x25
+#define CS_UNDEFINED			0x20
+#define CS_DEVICE			0x21
+#define CS_CONFIGURATION		0x22
+#define CS_STRING			0x23
+#define CS_INTERFACE			0x24
+#define CS_ENDPOINT			0x25
 
 /* VideoControl class specific interface descriptor */
-#define VC_DESCRIPTOR_UNDEFINED         0x00
-#define VC_HEADER                       0x01
-#define VC_INPUT_TERMINAL               0x02
-#define VC_OUTPUT_TERMINAL              0x03
-#define VC_SELECTOR_UNIT                0x04
-#define VC_PROCESSING_UNIT              0x05
-#define VC_EXTENSION_UNIT               0x06
+#define VC_DESCRIPTOR_UNDEFINED		0x00
+#define VC_HEADER			0x01
+#define VC_INPUT_TERMINAL		0x02
+#define VC_OUTPUT_TERMINAL		0x03
+#define VC_SELECTOR_UNIT		0x04
+#define VC_PROCESSING_UNIT		0x05
+#define VC_EXTENSION_UNIT		0x06
 
 /* VideoStreaming class specific interface descriptor */
-#define VS_UNDEFINED                    0x00
-#define VS_INPUT_HEADER                 0x01
-#define VS_OUTPUT_HEADER                0x02
-#define VS_STILL_IMAGE_FRAME            0x03
-#define VS_FORMAT_UNCOMPRESSED          0x04
-#define VS_FRAME_UNCOMPRESSED           0x05
-#define VS_FORMAT_MJPEG                 0x06
-#define VS_FRAME_MJPEG                  0x07
-#define VS_FORMAT_MPEG2TS               0x0a
-#define VS_FORMAT_DV                    0x0c
-#define VS_COLORFORMAT                  0x0d
-#define VS_FORMAT_FRAME_BASED           0x10
-#define VS_FRAME_FRAME_BASED            0x11
-#define VS_FORMAT_STREAM_BASED          0x12
+#define VS_UNDEFINED			0x00
+#define VS_INPUT_HEADER			0x01
+#define VS_OUTPUT_HEADER		0x02
+#define VS_STILL_IMAGE_FRAME		0x03
+#define VS_FORMAT_UNCOMPRESSED		0x04
+#define VS_FRAME_UNCOMPRESSED		0x05
+#define VS_FORMAT_MJPEG			0x06
+#define VS_FRAME_MJPEG			0x07
+#define VS_FORMAT_MPEG2TS		0x0a
+#define VS_FORMAT_DV			0x0c
+#define VS_COLORFORMAT			0x0d
+#define VS_FORMAT_FRAME_BASED		0x10
+#define VS_FRAME_FRAME_BASED		0x11
+#define VS_FORMAT_STREAM_BASED		0x12
 
 /* Endpoint type */
-#define EP_UNDEFINED                    0x00
-#define EP_GENERAL                      0x01
-#define EP_ENDPOINT                     0x02
-#define EP_INTERRUPT                    0x03
+#define EP_UNDEFINED			0x00
+#define EP_GENERAL			0x01
+#define EP_ENDPOINT			0x02
+#define EP_INTERRUPT			0x03
 
 /* Request codes */
-#define RC_UNDEFINED                    0x00
-#define SET_CUR                         0x01
-#define GET_CUR                         0x81
-#define GET_MIN                         0x82
-#define GET_MAX                         0x83
-#define GET_RES                         0x84
-#define GET_LEN                         0x85
-#define GET_INFO                        0x86
-#define GET_DEF                         0x87
+#define RC_UNDEFINED			0x00
+#define SET_CUR				0x01
+#define GET_CUR				0x81
+#define GET_MIN				0x82
+#define GET_MAX				0x83
+#define GET_RES				0x84
+#define GET_LEN				0x85
+#define GET_INFO			0x86
+#define GET_DEF				0x87
 
 /* VideoControl interface controls */
-#define VC_CONTROL_UNDEFINED            0x00
-#define VC_VIDEO_POWER_MODE_CONTROL     0x01
-#define VC_REQUEST_ERROR_CODE_CONTROL   0x02
+#define VC_CONTROL_UNDEFINED		0x00
+#define VC_VIDEO_POWER_MODE_CONTROL	0x01
+#define VC_REQUEST_ERROR_CODE_CONTROL	0x02
 
 /* Terminal controls */
-#define TE_CONTROL_UNDEFINED            0x00
+#define TE_CONTROL_UNDEFINED		0x00
 
 /* Selector Unit controls */
-#define SU_CONTROL_UNDEFINED            0x00
-#define SU_INPUT_SELECT_CONTROL         0x01
+#define SU_CONTROL_UNDEFINED		0x00
+#define SU_INPUT_SELECT_CONTROL		0x01
 
 /* Camera Terminal controls */
-#define CT_CONTROL_UNDEFINED            		0x00
-#define CT_SCANNING_MODE_CONTROL        		0x01
-#define CT_AE_MODE_CONTROL              		0x02
-#define CT_AE_PRIORITY_CONTROL          		0x03
-#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL               0x04
-#define CT_EXPOSURE_TIME_RELATIVE_CONTROL               0x05
-#define CT_FOCUS_ABSOLUTE_CONTROL       		0x06
-#define CT_FOCUS_RELATIVE_CONTROL       		0x07
-#define CT_FOCUS_AUTO_CONTROL           		0x08
-#define CT_IRIS_ABSOLUTE_CONTROL        		0x09
-#define CT_IRIS_RELATIVE_CONTROL        		0x0a
-#define CT_ZOOM_ABSOLUTE_CONTROL        		0x0b
-#define CT_ZOOM_RELATIVE_CONTROL        		0x0c
-#define CT_PANTILT_ABSOLUTE_CONTROL     		0x0d
-#define CT_PANTILT_RELATIVE_CONTROL     		0x0e
-#define CT_ROLL_ABSOLUTE_CONTROL        		0x0f
-#define CT_ROLL_RELATIVE_CONTROL        		0x10
-#define CT_PRIVACY_CONTROL              		0x11
+#define CT_CONTROL_UNDEFINED				0x00
+#define CT_SCANNING_MODE_CONTROL			0x01
+#define CT_AE_MODE_CONTROL				0x02
+#define CT_AE_PRIORITY_CONTROL				0x03
+#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL		0x04
+#define CT_EXPOSURE_TIME_RELATIVE_CONTROL		0x05
+#define CT_FOCUS_ABSOLUTE_CONTROL			0x06
+#define CT_FOCUS_RELATIVE_CONTROL			0x07
+#define CT_FOCUS_AUTO_CONTROL				0x08
+#define CT_IRIS_ABSOLUTE_CONTROL			0x09
+#define CT_IRIS_RELATIVE_CONTROL			0x0a
+#define CT_ZOOM_ABSOLUTE_CONTROL			0x0b
+#define CT_ZOOM_RELATIVE_CONTROL			0x0c
+#define CT_PANTILT_ABSOLUTE_CONTROL			0x0d
+#define CT_PANTILT_RELATIVE_CONTROL			0x0e
+#define CT_ROLL_ABSOLUTE_CONTROL			0x0f
+#define CT_ROLL_RELATIVE_CONTROL			0x10
+#define CT_PRIVACY_CONTROL				0x11
 
 /* Processing Unit controls */
-#define PU_CONTROL_UNDEFINED            		0x00
-#define PU_BACKLIGHT_COMPENSATION_CONTROL               0x01
-#define PU_BRIGHTNESS_CONTROL           		0x02
-#define PU_CONTRAST_CONTROL             		0x03
-#define PU_GAIN_CONTROL                 		0x04
-#define PU_POWER_LINE_FREQUENCY_CONTROL 		0x05
-#define PU_HUE_CONTROL                  		0x06
-#define PU_SATURATION_CONTROL           		0x07
-#define PU_SHARPNESS_CONTROL            		0x08
-#define PU_GAMMA_CONTROL                		0x09
-#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL            0x0a
-#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL       0x0b
-#define PU_WHITE_BALANCE_COMPONENT_CONTROL              0x0c
-#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL         0x0d
-#define PU_DIGITAL_MULTIPLIER_CONTROL   		0x0e
-#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL             0x0f
-#define PU_HUE_AUTO_CONTROL             		0x10
-#define PU_ANALOG_VIDEO_STANDARD_CONTROL                0x11
-#define PU_ANALOG_LOCK_STATUS_CONTROL   		0x12
+#define PU_CONTROL_UNDEFINED				0x00
+#define PU_BACKLIGHT_COMPENSATION_CONTROL		0x01
+#define PU_BRIGHTNESS_CONTROL				0x02
+#define PU_CONTRAST_CONTROL				0x03
+#define PU_GAIN_CONTROL					0x04
+#define PU_POWER_LINE_FREQUENCY_CONTROL			0x05
+#define PU_HUE_CONTROL					0x06
+#define PU_SATURATION_CONTROL				0x07
+#define PU_SHARPNESS_CONTROL				0x08
+#define PU_GAMMA_CONTROL				0x09
+#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL		0x0a
+#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL	0x0b
+#define PU_WHITE_BALANCE_COMPONENT_CONTROL		0x0c
+#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL		0x0d
+#define PU_DIGITAL_MULTIPLIER_CONTROL			0x0e
+#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL		0x0f
+#define PU_HUE_AUTO_CONTROL				0x10
+#define PU_ANALOG_VIDEO_STANDARD_CONTROL		0x11
+#define PU_ANALOG_LOCK_STATUS_CONTROL			0x12
 
 #define LXU_MOTOR_PANTILT_RELATIVE_CONTROL		0x01
 #define LXU_MOTOR_PANTILT_RESET_CONTROL			0x02
 #define LXU_MOTOR_FOCUS_MOTOR_CONTROL			0x03
 
 /* VideoStreaming interface controls */
-#define VS_CONTROL_UNDEFINED            0x00
-#define VS_PROBE_CONTROL                0x01
-#define VS_COMMIT_CONTROL               0x02
-#define VS_STILL_PROBE_CONTROL          0x03
-#define VS_STILL_COMMIT_CONTROL         0x04
-#define VS_STILL_IMAGE_TRIGGER_CONTROL  0x05
-#define VS_STREAM_ERROR_CODE_CONTROL    0x06
-#define VS_GENERATE_KEY_FRAME_CONTROL   0x07
-#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08
-#define VS_SYNC_DELAY_CONTROL           0x09
-
-#define TT_VENDOR_SPECIFIC              0x0100
-#define TT_STREAMING                    0x0101
+#define VS_CONTROL_UNDEFINED		0x00
+#define VS_PROBE_CONTROL		0x01
+#define VS_COMMIT_CONTROL		0x02
+#define VS_STILL_PROBE_CONTROL		0x03
+#define VS_STILL_COMMIT_CONTROL		0x04
+#define VS_STILL_IMAGE_TRIGGER_CONTROL	0x05
+#define VS_STREAM_ERROR_CODE_CONTROL	0x06
+#define VS_GENERATE_KEY_FRAME_CONTROL	0x07
+#define VS_UPDATE_FRAME_SEGMENT_CONTROL	0x08
+#define VS_SYNC_DELAY_CONTROL		0x09
+
+#define TT_VENDOR_SPECIFIC		0x0100
+#define TT_STREAMING			0x0101
 
 /* Input Terminal types */
-#define ITT_VENDOR_SPECIFIC             0x0200
-#define ITT_CAMERA                      0x0201
-#define ITT_MEDIA_TRANSPORT_INPUT       0x0202
+#define ITT_VENDOR_SPECIFIC		0x0200
+#define ITT_CAMERA			0x0201
+#define ITT_MEDIA_TRANSPORT_INPUT	0x0202
 
 /* Output Terminal types */
-#define OTT_VENDOR_SPECIFIC             0x0300
-#define OTT_DISPLAY                     0x0301
-#define OTT_MEDIA_TRANSPORT_OUTPUT      0x0302
+#define OTT_VENDOR_SPECIFIC		0x0300
+#define OTT_DISPLAY			0x0301
+#define OTT_MEDIA_TRANSPORT_OUTPUT	0x0302
 
 /* External Terminal types */
-#define EXTERNAL_VENDOR_SPECIFIC        0x0400
-#define COMPOSITE_CONNECTOR             0x0401
-#define SVIDEO_CONNECTOR                0x0402
-#define COMPONENT_CONNECTOR             0x0403
+#define EXTERNAL_VENDOR_SPECIFIC	0x0400
+#define COMPOSITE_CONNECTOR		0x0401
+#define SVIDEO_CONNECTOR		0x0402
+#define COMPONENT_CONNECTOR		0x0403
 
 #define UVC_TERM_INPUT			0x0000
 #define UVC_TERM_OUTPUT			0x8000
@@ -541,11 +541,11 @@ struct uvc_streaming {
 };
 
 enum uvc_buffer_state {
-	UVC_BUF_STATE_IDLE       = 0,
-	UVC_BUF_STATE_QUEUED     = 1,
-	UVC_BUF_STATE_ACTIVE     = 2,
-	UVC_BUF_STATE_DONE       = 3,
-	UVC_BUF_STATE_ERROR      = 4,
+	UVC_BUF_STATE_IDLE	= 0,
+	UVC_BUF_STATE_QUEUED	= 1,
+	UVC_BUF_STATE_ACTIVE	= 2,
+	UVC_BUF_STATE_DONE	= 3,
+	UVC_BUF_STATE_ERROR	= 4,
 };
 
 struct uvc_buffer {
diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c
index fbe9cc0d433..21208805ea9 100644
--- a/drivers/media/video/v4l2-subdev.c
+++ b/drivers/media/video/v4l2-subdev.c
@@ -28,13 +28,13 @@ int v4l2_subdev_command(struct v4l2_subdev *sd, unsigned cmd, void *arg)
 {
 	switch (cmd) {
 	case VIDIOC_QUERYCTRL:
-		return v4l2_subdev_call(sd, core, querymenu, arg);
+		return v4l2_subdev_call(sd, core, queryctrl, arg);
 	case VIDIOC_G_CTRL:
 		return v4l2_subdev_call(sd, core, g_ctrl, arg);
 	case VIDIOC_S_CTRL:
 		return v4l2_subdev_call(sd, core, s_ctrl, arg);
 	case VIDIOC_QUERYMENU:
-		return v4l2_subdev_call(sd, core, queryctrl, arg);
+		return v4l2_subdev_call(sd, core, querymenu, arg);
 	case VIDIOC_LOG_STATUS:
 		return v4l2_subdev_call(sd, core, log_status);
 	case VIDIOC_DBG_G_CHIP_IDENT:
diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h
index 46b7ad477ce..e873a916250 100644
--- a/drivers/media/video/zoran/zoran.h
+++ b/drivers/media/video/zoran/zoran.h
@@ -349,7 +349,6 @@ struct card_info {
 	u16 i2c_decoder, i2c_encoder;			/* I2C types */
 	u16 video_vfe, video_codec;			/* videocodec types */
 	u16 audio_chip;					/* audio type */
-	u16 vendor_id, device_id;	/* subsystem vendor/device ID */
 
 	int inputs;		/* number of video inputs */
 	struct input {
@@ -401,7 +400,6 @@ struct zoran {
 	char name[32];		/* name of this device */
 	struct pci_dev *pci_dev;	/* PCI device */
 	unsigned char revision;	/* revision of zr36057 */
-	unsigned int zr36057_adr;	/* bus address of IO mem returned by PCI BIOS */
 	unsigned char __iomem *zr36057_mem;/* pointer to mapped IO memory */
 
 	spinlock_t spinlock;	/* Spinlock */
@@ -490,16 +488,10 @@ struct zoran {
 	wait_queue_head_t test_q;
 };
 
-/*The following should be done in more portable way. It depends on define
-  of _ALPHA_BUZ in the Makefile.*/
-
-#ifdef _ALPHA_BUZ
-#define btwrite(dat,adr)    writel((dat), zr->zr36057_adr+(adr))
-#define btread(adr)         readl(zr->zr36057_adr+(adr))
-#else
+/* There was something called _ALPHA_BUZ that used the PCI address instead of
+ * the kernel iomapped address for btread/btwrite.  */
 #define btwrite(dat,adr)    writel((dat), zr->zr36057_mem+(adr))
 #define btread(adr)         readl(zr->zr36057_mem+(adr))
-#endif
 
 #define btand(dat,adr)      btwrite((dat) & btread(adr), adr)
 #define btor(dat,adr)       btwrite((dat) | btread(adr), adr)
diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c
index 05f39195372..5d2f090aa0f 100644
--- a/drivers/media/video/zoran/zoran_card.c
+++ b/drivers/media/video/zoran/zoran_card.c
@@ -61,17 +61,17 @@
 
 extern const struct zoran_format zoran_formats[];
 
-static int card[BUZ_MAX] = { -1, -1, -1, -1 };
+static int card[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 };
 module_param_array(card, int, NULL, 0444);
-MODULE_PARM_DESC(card, "The type of card");
+MODULE_PARM_DESC(card, "Card type");
 
-static int encoder[BUZ_MAX] = { -1, -1, -1, -1 };
+static int encoder[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 };
 module_param_array(encoder, int, NULL, 0444);
-MODULE_PARM_DESC(encoder, "i2c TV encoder");
+MODULE_PARM_DESC(encoder, "Video encoder chip");
 
-static int decoder[BUZ_MAX] = { -1, -1, -1, -1 };
+static int decoder[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 };
 module_param_array(decoder, int, NULL, 0444);
-MODULE_PARM_DESC(decoder, "i2c TV decoder");
+MODULE_PARM_DESC(decoder, "Video decoder chip");
 
 /*
    The video mem address of the video card.
@@ -104,9 +104,9 @@ module_param(default_norm, int, 0444);
 MODULE_PARM_DESC(default_norm, "Default norm (0=PAL, 1=NTSC, 2=SECAM)");
 
 /* /dev/videoN, -1 for autodetect */
-static int video_nr[BUZ_MAX] = {-1, -1, -1, -1};
+static int video_nr[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 };
 module_param_array(video_nr, int, NULL, 0444);
-MODULE_PARM_DESC(video_nr, "video device number (-1=Auto)");
+MODULE_PARM_DESC(video_nr, "Video device number (-1=Auto)");
 
 /*
    Number and size of grab buffers for Video 4 Linux
@@ -153,9 +153,21 @@ MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver");
 MODULE_AUTHOR("Serguei Miridonov");
 MODULE_LICENSE("GPL");
 
+#define ZR_DEVICE(subven, subdev, data)	{ \
+	.vendor = PCI_VENDOR_ID_ZORAN, .device = PCI_DEVICE_ID_ZORAN_36057, \
+	.subvendor = (subven), .subdevice = (subdev), .driver_data = (data) }
+
+static struct pci_device_id zr36067_pci_tbl[] = {
+	ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC10PLUS, DC10plus),
+	ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC30PLUS, DC30plus),
+	ZR_DEVICE(PCI_VENDOR_ID_ELECTRONICDESIGNGMBH, PCI_DEVICE_ID_LML_33R10, LML33R10),
+	ZR_DEVICE(PCI_VENDOR_ID_IOMEGA, PCI_DEVICE_ID_IOMEGA_BUZ, BUZ),
+	ZR_DEVICE(PCI_ANY_ID, PCI_ANY_ID, NUM_CARDS),
+	{0}
+};
+MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl);
 
-int zoran_num;			/* number of Buzs in use */
-struct zoran *zoran[BUZ_MAX];
+static unsigned int zoran_num;		/* number of cards found */
 
 /* videocodec bus functions ZR36060 */
 static u32
@@ -472,8 +484,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = {
 	}, {
 		.type = DC10plus,
 		.name = "DC10plus",
-		.vendor_id = PCI_VENDOR_ID_MIRO,
-		.device_id = PCI_DEVICE_ID_MIRO_DC10PLUS,
 		.i2c_decoder = I2C_DRIVERID_SAA7110,
 		.i2c_encoder = I2C_DRIVERID_ADV7175,
 		.video_codec = CODEC_TYPE_ZR36060,
@@ -531,8 +541,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = {
 	}, {
 		.type = DC30plus,
 		.name = "DC30plus",
-		.vendor_id = PCI_VENDOR_ID_MIRO,
-		.device_id = PCI_DEVICE_ID_MIRO_DC30PLUS,
 		.i2c_decoder = I2C_DRIVERID_VPX3220,
 		.i2c_encoder = I2C_DRIVERID_ADV7175,
 		.video_codec = CODEC_TYPE_ZR36050,
@@ -589,8 +597,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = {
 	}, {
 		.type = LML33R10,
 		.name = "LML33R10",
-		.vendor_id = PCI_VENDOR_ID_ELECTRONICDESIGNGMBH,
-		.device_id = PCI_DEVICE_ID_LML_33R10,
 		.i2c_decoder = I2C_DRIVERID_SAA7114,
 		.i2c_encoder = I2C_DRIVERID_ADV7170,
 		.video_codec = CODEC_TYPE_ZR36060,
@@ -618,8 +624,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = {
 	}, {
 		.type = BUZ,
 		.name = "Buz",
-		.vendor_id = PCI_VENDOR_ID_IOMEGA,
-		.device_id = PCI_DEVICE_ID_IOMEGA_BUZ,
 		.i2c_decoder = I2C_DRIVERID_SAA7111A,
 		.i2c_encoder = I2C_DRIVERID_SAA7185B,
 		.video_codec = CODEC_TYPE_ZR36060,
@@ -649,8 +653,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = {
 		.name = "6-Eyes",
 		/* AverMedia chose not to brand the 6-Eyes. Thus it
 		   can't be autodetected, and requires card=x. */
-		.vendor_id = -1,
-		.device_id = -1,
 		.i2c_decoder = I2C_DRIVERID_KS0127,
 		.i2c_encoder = I2C_DRIVERID_BT866,
 		.video_codec = CODEC_TYPE_ZR36060,
@@ -1138,7 +1140,8 @@ zr36057_init (struct zoran *zr)
 	strcpy(zr->video_dev->name, ZR_DEVNAME(zr));
 	err = video_register_device(zr->video_dev, VFL_TYPE_GRABBER, video_nr[zr->id]);
 	if (err < 0)
-		goto exit_unregister;
+		goto exit_free;
+	video_set_drvdata(zr->video_dev, zr);
 
 	zoran_init_hardware(zr);
 	if (zr36067_debug > 2)
@@ -1153,19 +1156,19 @@ zr36057_init (struct zoran *zr)
 	zr->initialized = 1;
 	return 0;
 
-exit_unregister:
-	zoran_unregister_i2c(zr);
 exit_free:
 	kfree(zr->stat_com);
 	kfree(zr->video_dev);
 	return err;
 }
 
-static void
-zoran_release (struct zoran *zr)
+static void __devexit zoran_remove(struct pci_dev *pdev)
 {
+	struct zoran *zr = pci_get_drvdata(pdev);
+
 	if (!zr->initialized)
 		goto exit_free;
+
 	/* unregister videocodec bus */
 	if (zr->codec) {
 		struct videocodec_master *master = zr->codec->master_data;
@@ -1194,6 +1197,7 @@ zoran_release (struct zoran *zr)
 	pci_disable_device(zr->pci_dev);
 	video_unregister_device(zr->video_dev);
 exit_free:
+	pci_set_drvdata(pdev, NULL);
 	kfree(zr);
 }
 
@@ -1256,338 +1260,329 @@ zoran_setup_videocodec (struct zoran *zr,
  *   Scan for a Buz card (actually for the PCI controller ZR36057),
  *   request the irq and map the io memory
  */
-static int __devinit
-find_zr36057 (void)
+static int __devinit zoran_probe(struct pci_dev *pdev,
+				 const struct pci_device_id *ent)
 {
 	unsigned char latency, need_latency;
 	struct zoran *zr;
-	struct pci_dev *dev = NULL;
 	int result;
 	struct videocodec_master *master_vfe = NULL;
 	struct videocodec_master *master_codec = NULL;
 	int card_num;
 	char *i2c_enc_name, *i2c_dec_name, *codec_name, *vfe_name;
+	unsigned int nr;
 
-	zoran_num = 0;
-	while (zoran_num < BUZ_MAX &&
-	       (dev = pci_get_device(PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057, dev)) != NULL) {
-		card_num = card[zoran_num];
-		zr = kzalloc(sizeof(struct zoran), GFP_KERNEL);
-		if (!zr) {
-			dprintk(1,
-				KERN_ERR
-				"%s: find_zr36057() - kzalloc failed\n",
-				ZORAN_NAME);
-			continue;
-		}
-		zr->pci_dev = dev;
-		//zr->zr36057_mem = NULL;
-		zr->id = zoran_num;
-		snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id);
-		spin_lock_init(&zr->spinlock);
-		mutex_init(&zr->resource_lock);
-		if (pci_enable_device(dev))
-			goto zr_free_mem;
-		zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0);
-		pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION,
-				     &zr->revision);
-		if (zr->revision < 2) {
-			dprintk(1,
-				KERN_INFO
-				"%s: Zoran ZR36057 (rev %d) irq: %d, memory: 0x%08x.\n",
-				ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq,
-				zr->zr36057_adr);
 
-			if (card_num == -1) {
-				dprintk(1,
-					KERN_ERR
-					"%s: find_zr36057() - no card specified, please use the card=X insmod option\n",
-					ZR_DEVNAME(zr));
-				goto zr_free_mem;
-			}
-		} else {
-			int i;
-			unsigned short ss_vendor, ss_device;
+	nr = zoran_num++;
+	if (nr >= BUZ_MAX) {
+		dprintk(1,
+			KERN_ERR
+			"%s: driver limited to %d card(s) maximum\n",
+			ZORAN_NAME, BUZ_MAX);
+		return -ENOENT;
+	}
 
-			ss_vendor = zr->pci_dev->subsystem_vendor;
-			ss_device = zr->pci_dev->subsystem_device;
+	zr = kzalloc(sizeof(struct zoran), GFP_KERNEL);
+	if (!zr) {
+		dprintk(1,
+			KERN_ERR
+			"%s: find_zr36057() - kzalloc failed\n",
+			ZORAN_NAME);
+		return -ENOMEM;
+	}
+	zr->pci_dev = pdev;
+	zr->id = nr;
+	snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id);
+	spin_lock_init(&zr->spinlock);
+	mutex_init(&zr->resource_lock);
+	if (pci_enable_device(pdev))
+		goto zr_free_mem;
+	pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, &zr->revision);
+
+	dprintk(1,
+		KERN_INFO
+		"%s: Zoran ZR360%c7 (rev %d), irq: %d, memory: 0x%08llx\n",
+		ZR_DEVNAME(zr), zr->revision < 2 ? '5' : '6', zr->revision,
+		zr->pci_dev->irq, (uint64_t)pci_resource_start(zr->pci_dev, 0));
+	if (zr->revision >= 2) {
+		dprintk(1,
+			KERN_INFO
+			"%s: Subsystem vendor=0x%04x id=0x%04x\n",
+			ZR_DEVNAME(zr), zr->pci_dev->subsystem_vendor,
+			zr->pci_dev->subsystem_device);
+	}
+
+	/* Use auto-detected card type? */
+	if (card[nr] == -1) {
+		if (zr->revision < 2) {
 			dprintk(1,
-				KERN_INFO
-				"%s: Zoran ZR36067 (rev %d) irq: %d, memory: 0x%08x\n",
-				ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq,
-				zr->zr36057_adr);
+				KERN_ERR
+				"%s: No card type specified, please use the card=X module parameter\n",
+				ZR_DEVNAME(zr));
 			dprintk(1,
-				KERN_INFO
-				"%s: subsystem vendor=0x%04x id=0x%04x\n",
-				ZR_DEVNAME(zr), ss_vendor, ss_device);
-			if (card_num == -1) {
-				dprintk(3,
-					KERN_DEBUG
-					"%s: find_zr36057() - trying to autodetect card type\n",
-					ZR_DEVNAME(zr));
-				for (i=0;i<NUM_CARDS;i++) {
-					if (ss_vendor == zoran_cards[i].vendor_id &&
-					    ss_device == zoran_cards[i].device_id) {
-						dprintk(3,
-							KERN_DEBUG
-							"%s: find_zr36057() - card %s detected\n",
-							ZR_DEVNAME(zr),
-							zoran_cards[i].name);
-						card_num = i;
-						break;
-					}
-				}
-				if (i == NUM_CARDS) {
-					dprintk(1,
-						KERN_ERR
-						"%s: find_zr36057() - unknown card\n",
-						ZR_DEVNAME(zr));
-					goto zr_free_mem;
-				}
-			}
-		}
-
-		if (card_num < 0 || card_num >= NUM_CARDS) {
-			dprintk(2,
 				KERN_ERR
-				"%s: find_zr36057() - invalid cardnum %d\n",
-				ZR_DEVNAME(zr), card_num);
+				"%s: It is not possible to auto-detect ZR36057 based cards\n",
+				ZR_DEVNAME(zr));
 			goto zr_free_mem;
 		}
 
-		/* even though we make this a non pointer and thus
-		 * theoretically allow for making changes to this struct
-		 * on a per-individual card basis at runtime, this is
-		 * strongly discouraged. This structure is intended to
-		 * keep general card information, no settings or anything */
-		zr->card = zoran_cards[card_num];
-		snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)),
-			 "%s[%u]", zr->card.name, zr->id);
-
-		zr->zr36057_mem = ioremap_nocache(zr->zr36057_adr, 0x1000);
-		if (!zr->zr36057_mem) {
+		card_num = ent->driver_data;
+		if (card_num >= NUM_CARDS) {
 			dprintk(1,
 				KERN_ERR
-				"%s: find_zr36057() - ioremap failed\n",
+				"%s: Unknown card, try specifying card=X module parameter\n",
 				ZR_DEVNAME(zr));
 			goto zr_free_mem;
 		}
-
-		result = request_irq(zr->pci_dev->irq,
-				     zoran_irq,
-				     IRQF_SHARED | IRQF_DISABLED,
-				     ZR_DEVNAME(zr),
-				     (void *) zr);
-		if (result < 0) {
-			if (result == -EINVAL) {
-				dprintk(1,
-					KERN_ERR
-					"%s: find_zr36057() - bad irq number or handler\n",
-					ZR_DEVNAME(zr));
-			} else if (result == -EBUSY) {
-				dprintk(1,
-					KERN_ERR
-					"%s: find_zr36057() - IRQ %d busy, change your PnP config in BIOS\n",
-					ZR_DEVNAME(zr), zr->pci_dev->irq);
-			} else {
-				dprintk(1,
-					KERN_ERR
-					"%s: find_zr36057() - can't assign irq, error code %d\n",
-					ZR_DEVNAME(zr), result);
-			}
-			goto zr_unmap;
-		}
-
-		/* set PCI latency timer */
-		pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER,
-				     &latency);
-		need_latency = zr->revision > 1 ? 32 : 48;
-		if (latency != need_latency) {
-			dprintk(2,
-				KERN_INFO
-				"%s: Changing PCI latency from %d to %d.\n",
-				ZR_DEVNAME(zr), latency, need_latency);
-			pci_write_config_byte(zr->pci_dev,
-					      PCI_LATENCY_TIMER,
-					      need_latency);
+		dprintk(3,
+			KERN_DEBUG
+			"%s: %s() - card %s detected\n",
+			ZR_DEVNAME(zr), __func__, zoran_cards[card_num].name);
+	} else {
+		card_num = card[nr];
+		if (card_num >= NUM_CARDS || card_num < 0) {
+			dprintk(1,
+				KERN_ERR
+				"%s: User specified card type %d out of range (0 .. %d)\n",
+				ZR_DEVNAME(zr), card_num, NUM_CARDS - 1);
+			goto zr_free_mem;
 		}
+	}
 
-		zr36057_restart(zr);
-		/* i2c */
-		dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n",
-			ZR_DEVNAME(zr));
+	/* even though we make this a non pointer and thus
+	 * theoretically allow for making changes to this struct
+	 * on a per-individual card basis at runtime, this is
+	 * strongly discouraged. This structure is intended to
+	 * keep general card information, no settings or anything */
+	zr->card = zoran_cards[card_num];
+	snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)),
+		 "%s[%u]", zr->card.name, zr->id);
+
+	zr->zr36057_mem = pci_ioremap_bar(zr->pci_dev, 0);
+	if (!zr->zr36057_mem) {
+		dprintk(1,
+			KERN_ERR
+			"%s: %s() - ioremap failed\n",
+			ZR_DEVNAME(zr), __func__);
+		goto zr_free_mem;
+	}
 
-		/* i2c decoder */
-		if (decoder[zr->id] != -1) {
-			i2c_dec_name = i2cid_to_modulename(decoder[zr->id]);
-			zr->card.i2c_decoder = decoder[zr->id];
-		} else if (zr->card.i2c_decoder != 0) {
-			i2c_dec_name =
-				i2cid_to_modulename(zr->card.i2c_decoder);
+	result = request_irq(zr->pci_dev->irq, zoran_irq,
+			     IRQF_SHARED | IRQF_DISABLED, ZR_DEVNAME(zr), zr);
+	if (result < 0) {
+		if (result == -EINVAL) {
+			dprintk(1,
+				KERN_ERR
+				"%s: find_zr36057() - bad irq number or handler\n",
+				ZR_DEVNAME(zr));
+		} else if (result == -EBUSY) {
+			dprintk(1,
+				KERN_ERR
+				"%s: find_zr36057() - IRQ %d busy, change your PnP config in BIOS\n",
+				ZR_DEVNAME(zr), zr->pci_dev->irq);
 		} else {
-			i2c_dec_name = NULL;
+			dprintk(1,
+				KERN_ERR
+				"%s: find_zr36057() - can't assign irq, error code %d\n",
+				ZR_DEVNAME(zr), result);
 		}
+		goto zr_unmap;
+	}
 
-		if (i2c_dec_name) {
-			if ((result = request_module(i2c_dec_name)) < 0) {
-				dprintk(1,
-					KERN_ERR
-					"%s: failed to load module %s: %d\n",
-					ZR_DEVNAME(zr), i2c_dec_name, result);
-			}
-		}
+	/* set PCI latency timer */
+	pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER,
+			     &latency);
+	need_latency = zr->revision > 1 ? 32 : 48;
+	if (latency != need_latency) {
+		dprintk(2,
+			KERN_INFO
+			"%s: Changing PCI latency from %d to %d\n",
+			ZR_DEVNAME(zr), latency, need_latency);
+		pci_write_config_byte(zr->pci_dev, PCI_LATENCY_TIMER,
+				      need_latency);
+	}
 
-		/* i2c encoder */
-		if (encoder[zr->id] != -1) {
-			i2c_enc_name = i2cid_to_modulename(encoder[zr->id]);
-			zr->card.i2c_encoder = encoder[zr->id];
-		} else if (zr->card.i2c_encoder != 0) {
-			i2c_enc_name =
-				i2cid_to_modulename(zr->card.i2c_encoder);
-		} else {
-			i2c_enc_name = NULL;
-		}
+	zr36057_restart(zr);
+	/* i2c */
+	dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n",
+		ZR_DEVNAME(zr));
+
+	/* i2c decoder */
+	if (decoder[zr->id] != -1) {
+		i2c_dec_name = i2cid_to_modulename(decoder[zr->id]);
+		zr->card.i2c_decoder = decoder[zr->id];
+	} else if (zr->card.i2c_decoder != 0) {
+		i2c_dec_name = i2cid_to_modulename(zr->card.i2c_decoder);
+	} else {
+		i2c_dec_name = NULL;
+	}
 
-		if (i2c_enc_name) {
-			if ((result = request_module(i2c_enc_name)) < 0) {
-				dprintk(1,
-					KERN_ERR
-					"%s: failed to load module %s: %d\n",
-					ZR_DEVNAME(zr), i2c_enc_name, result);
-			}
+	if (i2c_dec_name) {
+		result = request_module(i2c_dec_name);
+		if (result < 0) {
+			dprintk(1,
+				KERN_ERR
+				"%s: failed to load module %s: %d\n",
+				ZR_DEVNAME(zr), i2c_dec_name, result);
 		}
+	}
+
+	/* i2c encoder */
+	if (encoder[zr->id] != -1) {
+		i2c_enc_name = i2cid_to_modulename(encoder[zr->id]);
+		zr->card.i2c_encoder = encoder[zr->id];
+	} else if (zr->card.i2c_encoder != 0) {
+		i2c_enc_name = i2cid_to_modulename(zr->card.i2c_encoder);
+	} else {
+		i2c_enc_name = NULL;
+	}
 
-		if (zoran_register_i2c(zr) < 0) {
+	if (i2c_enc_name) {
+		result = request_module(i2c_enc_name);
+		if (result < 0) {
 			dprintk(1,
 				KERN_ERR
-				"%s: find_zr36057() - can't initialize i2c bus\n",
-				ZR_DEVNAME(zr));
-			goto zr_free_irq;
+				"%s: failed to load module %s: %d\n",
+				ZR_DEVNAME(zr), i2c_enc_name, result);
 		}
+	}
 
-		dprintk(2,
-			KERN_INFO "%s: Initializing videocodec bus...\n",
+	if (zoran_register_i2c(zr) < 0) {
+		dprintk(1,
+			KERN_ERR
+			"%s: find_zr36057() - can't initialize i2c bus\n",
 			ZR_DEVNAME(zr));
+		goto zr_free_irq;
+	}
 
-		if (zr->card.video_codec != 0 &&
-		    (codec_name =
-		     codecid_to_modulename(zr->card.video_codec)) != NULL) {
-			if ((result = request_module(codec_name)) < 0) {
+	dprintk(2,
+		KERN_INFO "%s: Initializing videocodec bus...\n",
+		ZR_DEVNAME(zr));
+
+	if (zr->card.video_codec) {
+		codec_name = codecid_to_modulename(zr->card.video_codec);
+		if (codec_name) {
+			result = request_module(codec_name);
+			if (result) {
 				dprintk(1,
 					KERN_ERR
 					"%s: failed to load modules %s: %d\n",
 					ZR_DEVNAME(zr), codec_name, result);
 			}
 		}
-		if (zr->card.video_vfe != 0 &&
-		    (vfe_name =
-		     codecid_to_modulename(zr->card.video_vfe)) != NULL) {
-			if ((result = request_module(vfe_name)) < 0) {
+	}
+	if (zr->card.video_vfe) {
+		vfe_name = codecid_to_modulename(zr->card.video_vfe);
+		if (vfe_name) {
+			result = request_module(vfe_name);
+			if (result < 0) {
 				dprintk(1,
 					KERN_ERR
 					"%s: failed to load modules %s: %d\n",
 					ZR_DEVNAME(zr), vfe_name, result);
 			}
 		}
+	}
 
-		/* reset JPEG codec */
-		jpeg_codec_sleep(zr, 1);
-		jpeg_codec_reset(zr);
-		/* video bus enabled */
-		/* display codec revision */
-		if (zr->card.video_codec != 0) {
-			master_codec = zoran_setup_videocodec(zr,
-							      zr->card.video_codec);
-			if (!master_codec)
-				goto zr_unreg_i2c;
-			zr->codec = videocodec_attach(master_codec);
-			if (!zr->codec) {
-				dprintk(1,
-					KERN_ERR
-					"%s: find_zr36057() - no codec found\n",
-					ZR_DEVNAME(zr));
-				goto zr_free_codec;
-			}
-			if (zr->codec->type != zr->card.video_codec) {
-				dprintk(1,
-					KERN_ERR
-					"%s: find_zr36057() - wrong codec\n",
-					ZR_DEVNAME(zr));
-				goto zr_detach_codec;
-			}
+	/* reset JPEG codec */
+	jpeg_codec_sleep(zr, 1);
+	jpeg_codec_reset(zr);
+	/* video bus enabled */
+	/* display codec revision */
+	if (zr->card.video_codec != 0) {
+		master_codec = zoran_setup_videocodec(zr, zr->card.video_codec);
+		if (!master_codec)
+			goto zr_unreg_i2c;
+		zr->codec = videocodec_attach(master_codec);
+		if (!zr->codec) {
+			dprintk(1,
+				KERN_ERR
+				"%s: find_zr36057() - no codec found\n",
+				ZR_DEVNAME(zr));
+			goto zr_free_codec;
 		}
-		if (zr->card.video_vfe != 0) {
-			master_vfe = zoran_setup_videocodec(zr,
-							    zr->card.video_vfe);
-			if (!master_vfe)
-				goto zr_detach_codec;
-			zr->vfe = videocodec_attach(master_vfe);
-			if (!zr->vfe) {
-				dprintk(1,
-					KERN_ERR
-					"%s: find_zr36057() - no VFE found\n",
-					ZR_DEVNAME(zr));
-				goto zr_free_vfe;
-			}
-			if (zr->vfe->type != zr->card.video_vfe) {
-				dprintk(1,
-					KERN_ERR
-					"%s: find_zr36057() = wrong VFE\n",
-					ZR_DEVNAME(zr));
-				goto zr_detach_vfe;
-			}
+		if (zr->codec->type != zr->card.video_codec) {
+			dprintk(1,
+				KERN_ERR
+				"%s: find_zr36057() - wrong codec\n",
+				ZR_DEVNAME(zr));
+			goto zr_detach_codec;
+		}
+	}
+	if (zr->card.video_vfe != 0) {
+		master_vfe = zoran_setup_videocodec(zr, zr->card.video_vfe);
+		if (!master_vfe)
+			goto zr_detach_codec;
+		zr->vfe = videocodec_attach(master_vfe);
+		if (!zr->vfe) {
+			dprintk(1,
+				KERN_ERR
+				"%s: find_zr36057() - no VFE found\n",
+				ZR_DEVNAME(zr));
+			goto zr_free_vfe;
+		}
+		if (zr->vfe->type != zr->card.video_vfe) {
+			dprintk(1,
+				KERN_ERR
+				"%s: find_zr36057() = wrong VFE\n",
+				ZR_DEVNAME(zr));
+			goto zr_detach_vfe;
 		}
-		/* Success so keep the pci_dev referenced */
-		pci_dev_get(zr->pci_dev);
-		zoran[zoran_num++] = zr;
-		continue;
-
-		// Init errors
-	      zr_detach_vfe:
-		videocodec_detach(zr->vfe);
-	      zr_free_vfe:
-		kfree(master_vfe);
-	      zr_detach_codec:
-		videocodec_detach(zr->codec);
-	      zr_free_codec:
-		kfree(master_codec);
-	      zr_unreg_i2c:
-		zoran_unregister_i2c(zr);
-	      zr_free_irq:
-		btwrite(0, ZR36057_SPGPPCR);
-		free_irq(zr->pci_dev->irq, zr);
-	      zr_unmap:
-		iounmap(zr->zr36057_mem);
-	      zr_free_mem:
-		kfree(zr);
-		continue;
 	}
-	if (dev)	/* Clean up ref count on early exit */
-		pci_dev_put(dev);
 
-	if (zoran_num == 0) {
-		dprintk(1, KERN_INFO "No known MJPEG cards found.\n");
+	/* take care of Natoma chipset and a revision 1 zr36057 */
+	if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) {
+		zr->jpg_buffers.need_contiguous = 1;
+		dprintk(1,
+			KERN_INFO
+			"%s: ZR36057/Natoma bug, max. buffer size is 128K\n",
+			ZR_DEVNAME(zr));
 	}
-	return zoran_num;
+
+	if (zr36057_init(zr) < 0)
+		goto zr_detach_vfe;
+
+	zoran_proc_init(zr);
+
+	pci_set_drvdata(pdev, zr);
+
+	return 0;
+
+zr_detach_vfe:
+	videocodec_detach(zr->vfe);
+zr_free_vfe:
+	kfree(master_vfe);
+zr_detach_codec:
+	videocodec_detach(zr->codec);
+zr_free_codec:
+	kfree(master_codec);
+zr_unreg_i2c:
+	zoran_unregister_i2c(zr);
+zr_free_irq:
+	btwrite(0, ZR36057_SPGPPCR);
+	free_irq(zr->pci_dev->irq, zr);
+zr_unmap:
+	iounmap(zr->zr36057_mem);
+zr_free_mem:
+	kfree(zr);
+
+	return -ENODEV;
 }
 
-static int __init
-init_dc10_cards (void)
+static struct pci_driver zoran_driver = {
+	.name = "zr36067",
+	.id_table = zr36067_pci_tbl,
+	.probe = zoran_probe,
+	.remove = zoran_remove,
+};
+
+static int __init zoran_init(void)
 {
-	int i;
+	int res;
 
-	memset(zoran, 0, sizeof(zoran));
 	printk(KERN_INFO "Zoran MJPEG board driver version %d.%d.%d\n",
 	       MAJOR_VERSION, MINOR_VERSION, RELEASE_VERSION);
 
-	/* Look for cards */
-	if (find_zr36057() < 0) {
-		return -EIO;
-	}
-	if (zoran_num == 0)
-		return -ENODEV;
-	dprintk(1, KERN_INFO "%s: %d card(s) found\n", ZORAN_NAME,
-		zoran_num);
 	/* check the parameters we have been given, adjust if necessary */
 	if (v4l_nbufs < 2)
 		v4l_nbufs = 2;
@@ -1629,37 +1624,22 @@ init_dc10_cards (void)
 			ZORAN_NAME);
 	}
 
-	/* take care of Natoma chipset and a revision 1 zr36057 */
-	for (i = 0; i < zoran_num; i++) {
-		struct zoran *zr = zoran[i];
-
-		if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) {
-			zr->jpg_buffers.need_contiguous = 1;
-			dprintk(1,
-				KERN_INFO
-				"%s: ZR36057/Natoma bug, max. buffer size is 128K\n",
-				ZR_DEVNAME(zr));
-		}
-
-		if (zr36057_init(zr) < 0) {
-			for (i = 0; i < zoran_num; i++)
-				zoran_release(zoran[i]);
-			return -EIO;
-		}
-		zoran_proc_init(zr);
+	res = pci_register_driver(&zoran_driver);
+	if (res) {
+		dprintk(1,
+			KERN_ERR
+			"%s: Unable to register ZR36057 driver\n",
+			ZORAN_NAME);
+		return res;
 	}
 
 	return 0;
 }
 
-static void __exit
-unload_dc10_cards (void)
+static void __exit zoran_exit(void)
 {
-	int i;
-
-	for (i = 0; i < zoran_num; i++)
-		zoran_release(zoran[i]);
+	pci_unregister_driver(&zoran_driver);
 }
 
-module_init(init_dc10_cards);
-module_exit(unload_dc10_cards);
+module_init(zoran_init);
+module_exit(zoran_exit);
diff --git a/drivers/media/video/zoran/zoran_card.h b/drivers/media/video/zoran/zoran_card.h
index e4dc9d29b40..4507bdc5e33 100644
--- a/drivers/media/video/zoran/zoran_card.h
+++ b/drivers/media/video/zoran/zoran_card.h
@@ -40,8 +40,6 @@ extern int zr36067_debug;
 
 /* Anybody who uses more than four? */
 #define BUZ_MAX 4
-extern int zoran_num;
-extern struct zoran *zoran[BUZ_MAX];
 
 extern struct video_device zoran_template;
 
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index b58b9dda715..120ef235e63 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -1196,83 +1196,54 @@ zoran_close_end_session (struct file *file)
  *   Open a zoran card. Right now the flags stuff is just playing
  */
 
-static int
-zoran_open(struct file  *file)
+static int zoran_open(struct file *file)
 {
-	unsigned int minor = video_devdata(file)->minor;
-	struct zoran *zr = NULL;
+	struct zoran *zr = video_drvdata(file);
 	struct zoran_fh *fh;
-	int i, res, first_open = 0, have_module_locks = 0;
+	int res, first_open = 0;
 
-	lock_kernel();
-	/* find the device */
-	for (i = 0; i < zoran_num; i++) {
-		if (zoran[i]->video_dev->minor == minor) {
-			zr = zoran[i];
-			break;
-		}
-	}
+	dprintk(2, KERN_INFO "%s: zoran_open(%s, pid=[%d]), users(-)=%d\n",
+		ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user + 1);
 
-	if (!zr) {
-		dprintk(1, KERN_ERR "%s: device not found!\n", ZORAN_NAME);
-		res = -ENODEV;
-		goto open_unlock_and_return;
-	}
+	lock_kernel();
 
 	/* see fs/device.c - the kernel already locks during open(),
 	 * so locking ourselves only causes deadlocks */
 	/*mutex_lock(&zr->resource_lock);*/
 
+	if (zr->user >= 2048) {
+		dprintk(1, KERN_ERR "%s: too many users (%d) on device\n",
+			ZR_DEVNAME(zr), zr->user);
+		res = -EBUSY;
+		goto fail_unlock;
+	}
+
 	if (!zr->decoder) {
 		dprintk(1,
 			KERN_ERR "%s: no TV decoder loaded for device!\n",
 			ZR_DEVNAME(zr));
 		res = -EIO;
-		goto open_unlock_and_return;
+		goto fail_unlock;
 	}
 
-	/* try to grab a module lock */
-	if (!try_module_get(THIS_MODULE)) {
-		dprintk(1,
-			KERN_ERR
-			"%s: failed to acquire my own lock! PANIC!\n",
-			ZR_DEVNAME(zr));
-		res = -ENODEV;
-		goto open_unlock_and_return;
-	}
 	if (!try_module_get(zr->decoder->driver->driver.owner)) {
 		dprintk(1,
 			KERN_ERR
-			"%s: failed to grab ownership of i2c decoder\n",
+			"%s: failed to grab ownership of video decoder\n",
 			ZR_DEVNAME(zr));
 		res = -EIO;
-		module_put(THIS_MODULE);
-		goto open_unlock_and_return;
+		goto fail_unlock;
 	}
 	if (zr->encoder &&
 	    !try_module_get(zr->encoder->driver->driver.owner)) {
 		dprintk(1,
 			KERN_ERR
-			"%s: failed to grab ownership of i2c encoder\n",
+			"%s: failed to grab ownership of video encoder\n",
 			ZR_DEVNAME(zr));
 		res = -EIO;
-		module_put(zr->decoder->driver->driver.owner);
-		module_put(THIS_MODULE);
-		goto open_unlock_and_return;
+		goto fail_decoder;
 	}
 
-	have_module_locks = 1;
-
-	if (zr->user >= 2048) {
-		dprintk(1, KERN_ERR "%s: too many users (%d) on device\n",
-			ZR_DEVNAME(zr), zr->user);
-		res = -EBUSY;
-		goto open_unlock_and_return;
-	}
-
-	dprintk(1, KERN_INFO "%s: zoran_open(%s, pid=[%d]), users(-)=%d\n",
-		ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user);
-
 	/* now, create the open()-specific file_ops struct */
 	fh = kzalloc(sizeof(struct zoran_fh), GFP_KERNEL);
 	if (!fh) {
@@ -1281,7 +1252,7 @@ zoran_open(struct file  *file)
 			"%s: zoran_open() - allocation of zoran_fh failed\n",
 			ZR_DEVNAME(zr));
 		res = -ENOMEM;
-		goto open_unlock_and_return;
+		goto fail_encoder;
 	}
 	/* used to be BUZ_MAX_WIDTH/HEIGHT, but that gives overflows
 	 * on norm-change! */
@@ -1292,9 +1263,8 @@ zoran_open(struct file  *file)
 			KERN_ERR
 			"%s: zoran_open() - allocation of overlay_mask failed\n",
 			ZR_DEVNAME(zr));
-		kfree(fh);
 		res = -ENOMEM;
-		goto open_unlock_and_return;
+		goto fail_fh;
 	}
 
 	if (zr->user++ == 0)
@@ -1319,22 +1289,19 @@ zoran_open(struct file  *file)
 
 	return 0;
 
-open_unlock_and_return:
-	/* if we grabbed locks, release them accordingly */
-	if (have_module_locks) {
-		module_put(zr->decoder->driver->driver.owner);
-		if (zr->encoder) {
-			module_put(zr->encoder->driver->driver.owner);
-		}
-		module_put(THIS_MODULE);
-	}
-
-	/* if there's no device found, we didn't obtain the lock either */
-	if (zr) {
-		/*mutex_unlock(&zr->resource_lock);*/
-	}
+fail_fh:
+	kfree(fh);
+fail_encoder:
+	if (zr->encoder)
+		module_put(zr->encoder->driver->driver.owner);
+fail_decoder:
+	module_put(zr->decoder->driver->driver.owner);
+fail_unlock:
 	unlock_kernel();
 
+	dprintk(2, KERN_INFO "%s: open failed (%d), users(-)=%d\n",
+		ZR_DEVNAME(zr), res, zr->user);
+
 	return res;
 }
 
@@ -1344,8 +1311,8 @@ zoran_close(struct file  *file)
 	struct zoran_fh *fh = file->private_data;
 	struct zoran *zr = fh->zr;
 
-	dprintk(1, KERN_INFO "%s: zoran_close(%s, pid=[%d]), users(+)=%d\n",
-		ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user);
+	dprintk(2, KERN_INFO "%s: zoran_close(%s, pid=[%d]), users(+)=%d\n",
+		ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user - 1);
 
 	/* kernel locks (fs/device.c), so don't do that ourselves
 	 * (prevents deadlocks) */
@@ -1391,10 +1358,8 @@ zoran_close(struct file  *file)
 
 	/* release locks on the i2c modules */
 	module_put(zr->decoder->driver->driver.owner);
-	if (zr->encoder) {
-		 module_put(zr->encoder->driver->driver.owner);
-	}
-	module_put(THIS_MODULE);
+	if (zr->encoder)
+		module_put(zr->encoder->driver->driver.owner);
 
 	/*mutex_unlock(&zr->resource_lock);*/
 
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 24508e28e3f..ea9488e7ad6 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -626,7 +626,6 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 	}
 
 	if (client->irq) {
-		set_irq_handler(client->irq, handle_level_irq);
 		ret = request_irq(client->irq, pcf50633_irq,
 				IRQF_TRIGGER_LOW, "pcf50633", pcf);
 
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 419c378bd24..c64e6798878 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -87,14 +87,6 @@ config PHANTOM
 	  If you choose to build module, its name will be phantom. If unsure,
 	  say N here.
 
-config EEPROM_93CX6
-	tristate "EEPROM 93CX6 support"
-	---help---
-	  This is a driver for the EEPROM chipsets 93c46 and 93c66.
-	  The driver supports both read as well as write commands.
-
-	  If unsure, say N.
-
 config SGI_IOC4
 	tristate "SGI IOC4 Base IO support"
 	depends on PCI
@@ -225,11 +217,13 @@ config DELL_LAPTOP
 	depends on EXPERIMENTAL
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on RFKILL
+	depends on POWER_SUPPLY
 	default n
 	---help---
 	This driver adds support for rfkill and backlight control to Dell
 	laptops.
 
 source "drivers/misc/c2port/Kconfig"
+source "drivers/misc/eeprom/Kconfig"
 
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index d5749a7bc77..bc119983055 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -13,10 +13,10 @@ obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
 obj-$(CONFIG_TIFM_7XX1)       	+= tifm_7xx1.o
 obj-$(CONFIG_PHANTOM)		+= phantom.o
 obj-$(CONFIG_SGI_IOC4)		+= ioc4.o
-obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
 obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
 obj-$(CONFIG_KGDB_TESTS)	+= kgdbts.o
 obj-$(CONFIG_SGI_XP)		+= sgi-xp/
 obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
 obj-$(CONFIG_HP_ILO)		+= hpilo.o
 obj-$(CONFIG_C2PORT)		+= c2port/
+obj-y				+= eeprom/
diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
index bf5e4d06543..558bf3f2c27 100644
--- a/drivers/misc/atmel-ssc.c
+++ b/drivers/misc/atmel-ssc.c
@@ -35,7 +35,7 @@ struct ssc_device *ssc_request(unsigned int ssc_num)
 
 	if (!ssc_valid) {
 		spin_unlock(&user_lock);
-		dev_dbg(&ssc->pdev->dev, "could not find requested device\n");
+		pr_err("ssc: ssc%d platform device is missing\n", ssc_num);
 		return ERR_PTR(-ENODEV);
 	}
 
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
new file mode 100644
index 00000000000..c76df8cda5e
--- /dev/null
+++ b/drivers/misc/eeprom/Kconfig
@@ -0,0 +1,59 @@
+menu "EEPROM support"
+
+config EEPROM_AT24
+	tristate "I2C EEPROMs from most vendors"
+	depends on I2C && SYSFS && EXPERIMENTAL
+	help
+	  Enable this driver to get read/write support to most I2C EEPROMs,
+	  after you configure the driver to know about each EEPROM on
+	  your target board.  Use these generic chip names, instead of
+	  vendor-specific ones like at24c64 or 24lc02:
+
+	     24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
+	     24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
+
+	  Unless you like data loss puzzles, always be sure that any chip
+	  you configure as a 24c32 (32 kbit) or larger is NOT really a
+	  24c16 (16 kbit) or smaller, and vice versa. Marking the chip
+	  as read-only won't help recover from this. Also, if your chip
+	  has any software write-protect mechanism you may want to review the
+	  code to make sure this driver won't turn it on by accident.
+
+	  If you use this with an SMBus adapter instead of an I2C adapter,
+	  full functionality is not available.  Only smaller devices are
+	  supported (24c16 and below, max 4 kByte).
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called at24.
+
+config EEPROM_AT25
+	tristate "SPI EEPROMs from most vendors"
+	depends on SPI && SYSFS
+	help
+	  Enable this driver to get read/write support to most SPI EEPROMs,
+	  after you configure the board init code to know about each eeprom
+	  on your target board.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called at25.
+
+config EEPROM_LEGACY
+	tristate "Old I2C EEPROM reader"
+	depends on I2C && SYSFS
+	help
+	  If you say yes here you get read-only access to the EEPROM data
+	  available on modern memory DIMMs and Sony Vaio laptops via I2C. Such
+	  EEPROMs could theoretically be available on other devices as well.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called eeprom.
+
+config EEPROM_93CX6
+	tristate "EEPROM 93CX6 support"
+	help
+	  This is a driver for the EEPROM chipsets 93c46 and 93c66.
+	  The driver supports both read as well as write commands.
+
+	  If unsure, say N.
+
+endmenu
diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
new file mode 100644
index 00000000000..539dd8f8812
--- /dev/null
+++ b/drivers/misc/eeprom/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_EEPROM_AT24)	+= at24.o
+obj-$(CONFIG_EEPROM_AT25)	+= at25.o
+obj-$(CONFIG_EEPROM_LEGACY)	+= eeprom.o
+obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
diff --git a/drivers/i2c/chips/at24.c b/drivers/misc/eeprom/at24.c
index d4775528abc..d4775528abc 100644
--- a/drivers/i2c/chips/at24.c
+++ b/drivers/misc/eeprom/at24.c
diff --git a/drivers/spi/at25.c b/drivers/misc/eeprom/at25.c
index 290dbe99647..290dbe99647 100644
--- a/drivers/spi/at25.c
+++ b/drivers/misc/eeprom/at25.c
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/misc/eeprom/eeprom.c
index 2c27193aeaa..2c27193aeaa 100644
--- a/drivers/i2c/chips/eeprom.c
+++ b/drivers/misc/eeprom/eeprom.c
diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c
index 15b1780025c..15b1780025c 100644
--- a/drivers/misc/eeprom_93cx6.c
+++ b/drivers/misc/eeprom/eeprom_93cx6.c
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
index 05e29828923..f26667a7abf 100644
--- a/drivers/misc/hpilo.c
+++ b/drivers/misc/hpilo.c
@@ -207,7 +207,7 @@ static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data)
 		  &device_ccb->recv_ctrl);
 
 	/* give iLO some time to process stop request */
-	for (retries = 1000; retries > 0; retries--) {
+	for (retries = MAX_WAIT; retries > 0; retries--) {
 		doorbell_set(driver_ccb);
 		udelay(1);
 		if (!(ioread32(&device_ccb->send_ctrl) & (1 << CTRL_BITPOS_A))
@@ -309,7 +309,7 @@ static int ilo_ccb_open(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
 	doorbell_clr(driver_ccb);
 
 	/* make sure iLO is really handling requests */
-	for (i = 1000; i > 0; i--) {
+	for (i = MAX_WAIT; i > 0; i--) {
 		if (ilo_pkt_dequeue(hw, driver_ccb, SENDQ, &pkt_id, NULL, NULL))
 			break;
 		udelay(1);
@@ -326,7 +326,7 @@ static int ilo_ccb_open(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
 
 	return 0;
 free:
-	pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa);
+	ilo_ccb_close(pdev, data);
 out:
 	return error;
 }
@@ -758,7 +758,7 @@ static void __exit ilo_exit(void)
 	class_destroy(ilo_class);
 }
 
-MODULE_VERSION("0.05");
+MODULE_VERSION("0.06");
 MODULE_ALIAS(ILO_NAME);
 MODULE_DESCRIPTION(ILO_NAME);
 MODULE_AUTHOR("David Altobelli <david.altobelli@hp.com>");
diff --git a/drivers/misc/hpilo.h b/drivers/misc/hpilo.h
index a281207696c..b64a20ef07e 100644
--- a/drivers/misc/hpilo.h
+++ b/drivers/misc/hpilo.h
@@ -19,6 +19,8 @@
 #define MAX_ILO_DEV	1
 /* max number of files */
 #define MAX_OPEN	(MAX_CCB * MAX_ILO_DEV)
+/* spin counter for open/close delay */
+#define MAX_WAIT	10000
 
 /*
  * Per device, used to track global memory allocations.
diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h
index a5bd658c2e8..275b78896a7 100644
--- a/drivers/misc/sgi-xp/xpc.h
+++ b/drivers/misc/sgi-xp/xpc.h
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2004-2008 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2004-2009 Silicon Graphics, Inc.  All Rights Reserved.
  */
 
 /*
@@ -514,7 +514,8 @@ struct xpc_channel_uv {
 						/* partition's notify mq */
 
 	struct xpc_send_msg_slot_uv *send_msg_slots;
-	struct xpc_notify_mq_msg_uv *recv_msg_slots;
+	void *recv_msg_slots;	/* each slot will hold a xpc_notify_mq_msg_uv */
+				/* structure plus the user's payload */
 
 	struct xpc_fifo_head_uv msg_slot_free_list;
 	struct xpc_fifo_head_uv recv_msg_list;	/* deliverable payloads */
diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c
index 9cd2ebe2a3b..45fd653dbe3 100644
--- a/drivers/misc/sgi-xp/xpc_channel.c
+++ b/drivers/misc/sgi-xp/xpc_channel.c
@@ -49,9 +49,6 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 		if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING))
 			return;
-
-		DBUG_ON(ch->local_msgqueue == NULL);
-		DBUG_ON(ch->remote_msgqueue == NULL);
 	}
 
 	if (!(ch->flags & XPC_C_OPENREPLY)) {
diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
index 82fb9958f22..2e975762c32 100644
--- a/drivers/misc/sgi-xp/xpc_sn2.c
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -1106,8 +1106,6 @@ xpc_process_activate_IRQ_rcvd_sn2(void)
 	int n_IRQs_expected;
 	int n_IRQs_detected;
 
-	DBUG_ON(xpc_activate_IRQ_rcvd == 0);
-
 	spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
 	n_IRQs_expected = xpc_activate_IRQ_rcvd;
 	xpc_activate_IRQ_rcvd = 0;
@@ -1726,6 +1724,7 @@ xpc_clear_local_msgqueue_flags_sn2(struct xpc_channel *ch)
 		msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue +
 					     (get % ch->local_nentries) *
 					     ch->entry_size);
+		DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
 		msg->flags = 0;
 	} while (++get < ch_sn2->remote_GP.get);
 }
@@ -1740,11 +1739,18 @@ xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch)
 	struct xpc_msg_sn2 *msg;
 	s64 put;
 
-	put = ch_sn2->w_remote_GP.put;
+	/* flags are zeroed when the buffer is allocated */
+	if (ch_sn2->remote_GP.put < ch->remote_nentries)
+		return;
+
+	put = max(ch_sn2->w_remote_GP.put, ch->remote_nentries);
 	do {
 		msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue +
 					     (put % ch->remote_nentries) *
 					     ch->entry_size);
+		DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
+		DBUG_ON(!(msg->flags & XPC_M_SN2_DONE));
+		DBUG_ON(msg->number != put - ch->remote_nentries);
 		msg->flags = 0;
 	} while (++put < ch_sn2->remote_GP.put);
 }
@@ -1836,6 +1842,7 @@ xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number)
 		 */
 		xpc_clear_remote_msgqueue_flags_sn2(ch);
 
+		smp_wmb(); /* ensure flags have been cleared before bte_copy */
 		ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put;
 
 		dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, "
@@ -1934,7 +1941,7 @@ xpc_get_deliverable_payload_sn2(struct xpc_channel *ch)
 			break;
 
 		get = ch_sn2->w_local_GP.get;
-		rmb();	/* guarantee that .get loads before .put */
+		smp_rmb();	/* guarantee that .get loads before .put */
 		if (get == ch_sn2->w_remote_GP.put)
 			break;
 
@@ -1956,11 +1963,13 @@ xpc_get_deliverable_payload_sn2(struct xpc_channel *ch)
 
 			msg = xpc_pull_remote_msg_sn2(ch, get);
 
-			DBUG_ON(msg != NULL && msg->number != get);
-			DBUG_ON(msg != NULL && (msg->flags & XPC_M_SN2_DONE));
-			DBUG_ON(msg != NULL && !(msg->flags & XPC_M_SN2_READY));
+			if (msg != NULL) {
+				DBUG_ON(msg->number != get);
+				DBUG_ON(msg->flags & XPC_M_SN2_DONE);
+				DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
 
-			payload = &msg->payload;
+				payload = &msg->payload;
+			}
 			break;
 		}
 
@@ -2053,7 +2062,7 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags,
 	while (1) {
 
 		put = ch_sn2->w_local_GP.put;
-		rmb();	/* guarantee that .put loads before .get */
+		smp_rmb();	/* guarantee that .put loads before .get */
 		if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) {
 
 			/* There are available message entries. We need to try
@@ -2186,7 +2195,7 @@ xpc_send_payload_sn2(struct xpc_channel *ch, u32 flags, void *payload,
 	 * The preceding store of msg->flags must occur before the following
 	 * load of local_GP->put.
 	 */
-	mb();
+	smp_mb();
 
 	/* see if the message is next in line to be sent, if so send it */
 
@@ -2277,8 +2286,9 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload)
 	dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n",
 		(void *)msg, msg_number, ch->partid, ch->number);
 
-	DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->entry_size) !=
+	DBUG_ON((((u64)msg - (u64)ch->sn.sn2.remote_msgqueue) / ch->entry_size) !=
 		msg_number % ch->remote_nentries);
+	DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
 	DBUG_ON(msg->flags & XPC_M_SN2_DONE);
 
 	msg->flags |= XPC_M_SN2_DONE;
@@ -2287,7 +2297,7 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload)
 	 * The preceding store of msg->flags must occur before the following
 	 * load of local_GP->get.
 	 */
-	mb();
+	smp_mb();
 
 	/*
 	 * See if this message is next in line to be acknowledged as having
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 91a55b1b103..29c0502a96b 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2008-2009 Silicon Graphics, Inc.  All Rights Reserved.
  */
 
 /*
@@ -1010,8 +1010,8 @@ xpc_allocate_recv_msg_slot_uv(struct xpc_channel *ch)
 			continue;
 
 		for (entry = 0; entry < nentries; entry++) {
-			msg_slot = ch_uv->recv_msg_slots + entry *
-			    ch->entry_size;
+			msg_slot = ch_uv->recv_msg_slots +
+			    entry * ch->entry_size;
 
 			msg_slot->hdr.msg_slot_number = entry;
 		}
@@ -1308,9 +1308,8 @@ xpc_handle_notify_mq_msg_uv(struct xpc_partition *part,
 	/* we're dealing with a normal message sent via the notify_mq */
 	ch_uv = &ch->sn.uv;
 
-	msg_slot = (struct xpc_notify_mq_msg_uv *)((u64)ch_uv->recv_msg_slots +
-		    (msg->hdr.msg_slot_number % ch->remote_nentries) *
-		    ch->entry_size);
+	msg_slot = ch_uv->recv_msg_slots +
+	    (msg->hdr.msg_slot_number % ch->remote_nentries) * ch->entry_size;
 
 	BUG_ON(msg->hdr.msg_slot_number != msg_slot->hdr.msg_slot_number);
 	BUG_ON(msg_slot->hdr.size != 0);
@@ -1423,7 +1422,7 @@ xpc_send_payload_uv(struct xpc_channel *ch, u32 flags, void *payload,
 		atomic_inc(&ch->n_to_notify);
 
 		msg_slot->key = key;
-		wmb(); /* a non-NULL func must hit memory after the key */
+		smp_wmb(); /* a non-NULL func must hit memory after the key */
 		msg_slot->func = func;
 
 		if (ch->flags & XPC_C_DISCONNECTING) {
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index 7957f525b2f..6faefcffcb5 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 1999-2008 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 1999-2009 Silicon Graphics, Inc. All rights reserved.
  */
 
 /*
@@ -551,6 +551,7 @@ xpnet_init(void)
 
 	netif_carrier_off(xpnet_device);
 
+	xpnet_device->netdev_ops = &xpnet_netdev_ops;
 	xpnet_device->mtu = XPNET_DEF_MTU;
 
 	/*
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index dfa585f7fea..99d4b28d52e 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -76,6 +76,16 @@ config MMC_OMAP
 
 	  If unsure, say N.
 
+config MMC_OMAP_HS
+	tristate "TI OMAP High Speed Multimedia Card Interface support"
+	depends on ARCH_OMAP2430 || ARCH_OMAP3
+	help
+	  This selects the TI OMAP High Speed Multimedia card Interface.
+	  If you have an OMAP2430 or OMAP3 board with a Multimedia Card slot,
+	  say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_WBSD
 	tristate "Winbond W83L51xD SD/MMC Card Interface support"
 	depends on ISA_DMA_API
@@ -135,6 +145,16 @@ config MMC_IMX
 
 	  If unsure, say N.
 
+config MMC_MXC
+	tristate "Freescale i.MX2/3 Multimedia Card Interface support"
+	depends on ARCH_MXC
+	help
+	  This selects the Freescale i.MX2/3 Multimedia card Interface.
+	  If you have a i.MX platform with a Multimedia Card slot,
+	  say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_TIFM_SD
 	tristate "TI Flash Media MMC/SD Interface support  (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && PCI
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index f4853288bbb..dedec55861d 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -9,12 +9,14 @@ endif
 obj-$(CONFIG_MMC_ARMMMCI)	+= mmci.o
 obj-$(CONFIG_MMC_PXA)		+= pxamci.o
 obj-$(CONFIG_MMC_IMX)		+= imxmmc.o
+obj-$(CONFIG_MMC_MXC)		+= mxcmmc.o
 obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o
 obj-$(CONFIG_MMC_SDHCI_PCI)	+= sdhci-pci.o
 obj-$(CONFIG_MMC_RICOH_MMC)	+= ricoh_mmc.o
 obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
 obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)		+= omap.o
+obj-$(CONFIG_MMC_OMAP_HS)	+= omap_hsmmc.o
 obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
 obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
 obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 1bcbdd6763a..2909bbc8ad0 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -430,6 +430,8 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 				clk = 255;
 			host->cclk = host->mclk / (2 * (clk + 1));
 		}
+		if (host->hw_designer == 0x80)
+			clk |= MCI_FCEN; /* Bug fix in ST IP block */
 		clk |= MCI_CLK_ENABLE;
 	}
 
@@ -440,15 +442,27 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_POWER_OFF:
 		break;
 	case MMC_POWER_UP:
-		pwr |= MCI_PWR_UP;
-		break;
+		/* The ST version does not have this, fall through to POWER_ON */
+		if (host->hw_designer != 0x80) {
+			pwr |= MCI_PWR_UP;
+			break;
+		}
 	case MMC_POWER_ON:
 		pwr |= MCI_PWR_ON;
 		break;
 	}
 
-	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
-		pwr |= MCI_ROD;
+	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
+		if (host->hw_designer != 0x80)
+			pwr |= MCI_ROD;
+		else {
+			/*
+			 * The ST Micro variant use the ROD bit for something
+			 * else and only has OD (Open Drain).
+			 */
+			pwr |= MCI_OD;
+		}
+	}
 
 	writel(clk, host->base + MMCICLOCK);
 
@@ -500,6 +514,12 @@ static int mmci_probe(struct amba_device *dev, void *id)
 	}
 
 	host = mmc_priv(mmc);
+	/* Bits 12 thru 19 is the designer */
+	host->hw_designer = (dev->periphid >> 12) & 0xff;
+	/* Bits 20 thru 23 is the revison */
+	host->hw_revision = (dev->periphid >> 20) & 0xf;
+	DBG(host, "designer ID = 0x%02x\n", host->hw_designer);
+	DBG(host, "revision = 0x%01x\n", host->hw_revision);
 	host->clk = clk_get(&dev->dev, NULL);
 	if (IS_ERR(host->clk)) {
 		ret = PTR_ERR(host->clk);
@@ -693,6 +713,15 @@ static struct amba_id mmci_ids[] = {
 		.id	= 0x00041181,
 		.mask	= 0x000fffff,
 	},
+	/* ST Micro variants */
+	{
+		.id     = 0x00180180,
+		.mask   = 0x00ffffff,
+	},
+	{
+		.id     = 0x00280180,
+		.mask   = 0x00ffffff,
+	},
 	{ 0, 0 },
 };
 
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 0f39c490f02..0441bac1c0e 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -11,13 +11,23 @@
 #define MCI_PWR_OFF		0x00
 #define MCI_PWR_UP		0x02
 #define MCI_PWR_ON		0x03
+#define MCI_DATA2DIREN		(1 << 2)
+#define MCI_CMDDIREN		(1 << 3)
+#define MCI_DATA0DIREN		(1 << 4)
+#define MCI_DATA31DIREN		(1 << 5)
 #define MCI_OD			(1 << 6)
 #define MCI_ROD			(1 << 7)
+/* The ST Micro version does not have ROD */
+#define MCI_FBCLKEN		(1 << 7)
+#define MCI_DATA74DIREN		(1 << 8)
 
 #define MMCICLOCK		0x004
 #define MCI_CLK_ENABLE		(1 << 8)
 #define MCI_CLK_PWRSAVE		(1 << 9)
 #define MCI_CLK_BYPASS		(1 << 10)
+#define MCI_WIDE_BUS		(1 << 11)
+/* HW flow control on the ST Micro version */
+#define MCI_FCEN		(1 << 13)
 
 #define MMCIARGUMENT		0x008
 #define MMCICOMMAND		0x00c
@@ -26,6 +36,10 @@
 #define MCI_CPSM_INTERRUPT	(1 << 8)
 #define MCI_CPSM_PENDING	(1 << 9)
 #define MCI_CPSM_ENABLE		(1 << 10)
+#define MCI_SDIO_SUSP		(1 << 11)
+#define MCI_ENCMD_COMPL		(1 << 12)
+#define MCI_NIEN		(1 << 13)
+#define MCI_CE_ATACMD		(1 << 14)
 
 #define MMCIRESPCMD		0x010
 #define MMCIRESPONSE0		0x014
@@ -39,6 +53,11 @@
 #define MCI_DPSM_DIRECTION	(1 << 1)
 #define MCI_DPSM_MODE		(1 << 2)
 #define MCI_DPSM_DMAENABLE	(1 << 3)
+#define MCI_DPSM_BLOCKSIZE	(1 << 4)
+#define MCI_DPSM_RWSTART	(1 << 8)
+#define MCI_DPSM_RWSTOP		(1 << 9)
+#define MCI_DPSM_RWMOD		(1 << 10)
+#define MCI_DPSM_SDIOEN		(1 << 11)
 
 #define MMCIDATACNT		0x030
 #define MMCISTATUS		0x034
@@ -63,6 +82,8 @@
 #define MCI_RXFIFOEMPTY		(1 << 19)
 #define MCI_TXDATAAVLBL		(1 << 20)
 #define MCI_RXDATAAVLBL		(1 << 21)
+#define MCI_SDIOIT		(1 << 22)
+#define MCI_CEATAEND		(1 << 23)
 
 #define MMCICLEAR		0x038
 #define MCI_CMDCRCFAILCLR	(1 << 0)
@@ -75,6 +96,8 @@
 #define MCI_CMDSENTCLR		(1 << 7)
 #define MCI_DATAENDCLR		(1 << 8)
 #define MCI_DATABLOCKENDCLR	(1 << 10)
+#define MCI_SDIOITC		(1 << 22)
+#define MCI_CEATAENDC		(1 << 23)
 
 #define MMCIMASK0		0x03c
 #define MCI_CMDCRCFAILMASK	(1 << 0)
@@ -98,6 +121,8 @@
 #define MCI_RXFIFOEMPTYMASK	(1 << 19)
 #define MCI_TXDATAAVLBLMASK	(1 << 20)
 #define MCI_RXDATAAVLBLMASK	(1 << 21)
+#define MCI_SDIOITMASK		(1 << 22)
+#define MCI_CEATAENDMASK	(1 << 23)
 
 #define MMCIMASK1		0x040
 #define MMCIFIFOCNT		0x048
@@ -136,6 +161,9 @@ struct mmci_host {
 	u32			pwr;
 	struct mmc_platform_data *plat;
 
+	u8			hw_designer;
+	u8			hw_revision:4;
+
 	struct timer_list	timer;
 	unsigned int		oldstat;
 
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
new file mode 100644
index 00000000000..dda0be4e25d
--- /dev/null
+++ b/drivers/mmc/host/mxcmmc.c
@@ -0,0 +1,880 @@
+/*
+ *  linux/drivers/mmc/host/mxcmmc.c - Freescale i.MX MMCI driver
+ *
+ *  This is a driver for the SDHC controller found in Freescale MX2/MX3
+ *  SoCs. It is basically the same hardware as found on MX1 (imxmmc.c).
+ *  Unlike the hardware found on MX1, this hardware just works and does
+ *  not need all the quirks found in imxmmc.c, hence the seperate driver.
+ *
+ *  Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *  Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
+ *
+ *  derived from pxamci.c by Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <mach/mmc.h>
+
+#ifdef CONFIG_ARCH_MX2
+#include <mach/dma-mx1-mx2.h>
+#define HAS_DMA
+#endif
+
+#define DRIVER_NAME "imx-mmc"
+
+#define MMC_REG_STR_STP_CLK		0x00
+#define MMC_REG_STATUS			0x04
+#define MMC_REG_CLK_RATE		0x08
+#define MMC_REG_CMD_DAT_CONT		0x0C
+#define MMC_REG_RES_TO			0x10
+#define MMC_REG_READ_TO			0x14
+#define MMC_REG_BLK_LEN			0x18
+#define MMC_REG_NOB			0x1C
+#define MMC_REG_REV_NO			0x20
+#define MMC_REG_INT_CNTR		0x24
+#define MMC_REG_CMD			0x28
+#define MMC_REG_ARG			0x2C
+#define MMC_REG_RES_FIFO		0x34
+#define MMC_REG_BUFFER_ACCESS		0x38
+
+#define STR_STP_CLK_RESET               (1 << 3)
+#define STR_STP_CLK_START_CLK           (1 << 1)
+#define STR_STP_CLK_STOP_CLK            (1 << 0)
+
+#define STATUS_CARD_INSERTION		(1 << 31)
+#define STATUS_CARD_REMOVAL		(1 << 30)
+#define STATUS_YBUF_EMPTY		(1 << 29)
+#define STATUS_XBUF_EMPTY		(1 << 28)
+#define STATUS_YBUF_FULL		(1 << 27)
+#define STATUS_XBUF_FULL		(1 << 26)
+#define STATUS_BUF_UND_RUN		(1 << 25)
+#define STATUS_BUF_OVFL			(1 << 24)
+#define STATUS_SDIO_INT_ACTIVE		(1 << 14)
+#define STATUS_END_CMD_RESP		(1 << 13)
+#define STATUS_WRITE_OP_DONE		(1 << 12)
+#define STATUS_DATA_TRANS_DONE		(1 << 11)
+#define STATUS_READ_OP_DONE		(1 << 11)
+#define STATUS_WR_CRC_ERROR_CODE_MASK	(3 << 10)
+#define STATUS_CARD_BUS_CLK_RUN		(1 << 8)
+#define STATUS_BUF_READ_RDY		(1 << 7)
+#define STATUS_BUF_WRITE_RDY		(1 << 6)
+#define STATUS_RESP_CRC_ERR		(1 << 5)
+#define STATUS_CRC_READ_ERR		(1 << 3)
+#define STATUS_CRC_WRITE_ERR		(1 << 2)
+#define STATUS_TIME_OUT_RESP		(1 << 1)
+#define STATUS_TIME_OUT_READ		(1 << 0)
+#define STATUS_ERR_MASK			0x2f
+
+#define CMD_DAT_CONT_CMD_RESP_LONG_OFF	(1 << 12)
+#define CMD_DAT_CONT_STOP_READWAIT	(1 << 11)
+#define CMD_DAT_CONT_START_READWAIT	(1 << 10)
+#define CMD_DAT_CONT_BUS_WIDTH_4	(2 << 8)
+#define CMD_DAT_CONT_INIT		(1 << 7)
+#define CMD_DAT_CONT_WRITE		(1 << 4)
+#define CMD_DAT_CONT_DATA_ENABLE	(1 << 3)
+#define CMD_DAT_CONT_RESPONSE_48BIT_CRC	(1 << 0)
+#define CMD_DAT_CONT_RESPONSE_136BIT	(2 << 0)
+#define CMD_DAT_CONT_RESPONSE_48BIT	(3 << 0)
+
+#define INT_SDIO_INT_WKP_EN		(1 << 18)
+#define INT_CARD_INSERTION_WKP_EN	(1 << 17)
+#define INT_CARD_REMOVAL_WKP_EN		(1 << 16)
+#define INT_CARD_INSERTION_EN		(1 << 15)
+#define INT_CARD_REMOVAL_EN		(1 << 14)
+#define INT_SDIO_IRQ_EN			(1 << 13)
+#define INT_DAT0_EN			(1 << 12)
+#define INT_BUF_READ_EN			(1 << 4)
+#define INT_BUF_WRITE_EN		(1 << 3)
+#define INT_END_CMD_RES_EN		(1 << 2)
+#define INT_WRITE_OP_DONE_EN		(1 << 1)
+#define INT_READ_OP_EN			(1 << 0)
+
+struct mxcmci_host {
+	struct mmc_host		*mmc;
+	struct resource		*res;
+	void __iomem		*base;
+	int			irq;
+	int			detect_irq;
+	int			dma;
+	int			do_dma;
+	unsigned int		power_mode;
+	struct imxmmc_platform_data *pdata;
+
+	struct mmc_request	*req;
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+
+	unsigned int		dma_nents;
+	unsigned int		datasize;
+	unsigned int		dma_dir;
+
+	u16			rev_no;
+	unsigned int		cmdat;
+
+	struct clk		*clk;
+
+	int			clock;
+
+	struct work_struct	datawork;
+};
+
+static inline int mxcmci_use_dma(struct mxcmci_host *host)
+{
+	return host->do_dma;
+}
+
+static void mxcmci_softreset(struct mxcmci_host *host)
+{
+	int i;
+
+	/* reset sequence */
+	writew(STR_STP_CLK_RESET, host->base + MMC_REG_STR_STP_CLK);
+	writew(STR_STP_CLK_RESET | STR_STP_CLK_START_CLK,
+			host->base + MMC_REG_STR_STP_CLK);
+
+	for (i = 0; i < 8; i++)
+		writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK);
+
+	writew(0xff, host->base + MMC_REG_RES_TO);
+}
+
+static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
+{
+	unsigned int nob = data->blocks;
+	unsigned int blksz = data->blksz;
+	unsigned int datasize = nob * blksz;
+#ifdef HAS_DMA
+	struct scatterlist *sg;
+	int i;
+#endif
+	if (data->flags & MMC_DATA_STREAM)
+		nob = 0xffff;
+
+	host->data = data;
+	data->bytes_xfered = 0;
+
+	writew(nob, host->base + MMC_REG_NOB);
+	writew(blksz, host->base + MMC_REG_BLK_LEN);
+	host->datasize = datasize;
+
+#ifdef HAS_DMA
+	for_each_sg(data->sg, sg, data->sg_len, i) {
+		if (sg->offset & 3 || sg->length & 3) {
+			host->do_dma = 0;
+			return;
+		}
+	}
+
+	if (data->flags & MMC_DATA_READ) {
+		host->dma_dir = DMA_FROM_DEVICE;
+		host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
+					     data->sg_len,  host->dma_dir);
+
+		imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
+				 host->res->start + MMC_REG_BUFFER_ACCESS,
+				 DMA_MODE_READ);
+	} else {
+		host->dma_dir = DMA_TO_DEVICE;
+		host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
+					     data->sg_len,  host->dma_dir);
+
+		imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
+				 host->res->start + MMC_REG_BUFFER_ACCESS,
+				 DMA_MODE_WRITE);
+	}
+
+	wmb();
+
+	imx_dma_enable(host->dma);
+#endif /* HAS_DMA */
+}
+
+static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,
+		unsigned int cmdat)
+{
+	WARN_ON(host->cmd != NULL);
+	host->cmd = cmd;
+
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_R1: /* short CRC, OPCODE */
+	case MMC_RSP_R1B:/* short CRC, OPCODE, BUSY */
+		cmdat |= CMD_DAT_CONT_RESPONSE_48BIT_CRC;
+		break;
+	case MMC_RSP_R2: /* long 136 bit + CRC */
+		cmdat |= CMD_DAT_CONT_RESPONSE_136BIT;
+		break;
+	case MMC_RSP_R3: /* short */
+		cmdat |= CMD_DAT_CONT_RESPONSE_48BIT;
+		break;
+	case MMC_RSP_NONE:
+		break;
+	default:
+		dev_err(mmc_dev(host->mmc), "unhandled response type 0x%x\n",
+				mmc_resp_type(cmd));
+		cmd->error = -EINVAL;
+		return -EINVAL;
+	}
+
+	if (mxcmci_use_dma(host))
+		writel(INT_READ_OP_EN | INT_WRITE_OP_DONE_EN |
+				INT_END_CMD_RES_EN,
+				host->base + MMC_REG_INT_CNTR);
+	else
+		writel(INT_END_CMD_RES_EN, host->base + MMC_REG_INT_CNTR);
+
+	writew(cmd->opcode, host->base + MMC_REG_CMD);
+	writel(cmd->arg, host->base + MMC_REG_ARG);
+	writew(cmdat, host->base + MMC_REG_CMD_DAT_CONT);
+
+	return 0;
+}
+
+static void mxcmci_finish_request(struct mxcmci_host *host,
+		struct mmc_request *req)
+{
+	writel(0, host->base + MMC_REG_INT_CNTR);
+
+	host->req = NULL;
+	host->cmd = NULL;
+	host->data = NULL;
+
+	mmc_request_done(host->mmc, req);
+}
+
+static int mxcmci_finish_data(struct mxcmci_host *host, unsigned int stat)
+{
+	struct mmc_data *data = host->data;
+	int data_error;
+
+#ifdef HAS_DMA
+	if (mxcmci_use_dma(host)) {
+		imx_dma_disable(host->dma);
+		dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_nents,
+				host->dma_dir);
+	}
+#endif
+
+	if (stat & STATUS_ERR_MASK) {
+		dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n",
+				stat);
+		if (stat & STATUS_CRC_READ_ERR) {
+			data->error = -EILSEQ;
+		} else if (stat & STATUS_CRC_WRITE_ERR) {
+			u32 err_code = (stat >> 9) & 0x3;
+			if (err_code == 2) /* No CRC response */
+				data->error = -ETIMEDOUT;
+			else
+				data->error = -EILSEQ;
+		} else if (stat & STATUS_TIME_OUT_READ) {
+			data->error = -ETIMEDOUT;
+		} else {
+			data->error = -EIO;
+		}
+	} else {
+		data->bytes_xfered = host->datasize;
+	}
+
+	data_error = data->error;
+
+	host->data = NULL;
+
+	return data_error;
+}
+
+static void mxcmci_read_response(struct mxcmci_host *host, unsigned int stat)
+{
+	struct mmc_command *cmd = host->cmd;
+	int i;
+	u32 a, b, c;
+
+	if (!cmd)
+		return;
+
+	if (stat & STATUS_TIME_OUT_RESP) {
+		dev_dbg(mmc_dev(host->mmc), "CMD TIMEOUT\n");
+		cmd->error = -ETIMEDOUT;
+	} else if (stat & STATUS_RESP_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
+		dev_dbg(mmc_dev(host->mmc), "cmd crc error\n");
+		cmd->error = -EILSEQ;
+	}
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136) {
+			for (i = 0; i < 4; i++) {
+				a = readw(host->base + MMC_REG_RES_FIFO);
+				b = readw(host->base + MMC_REG_RES_FIFO);
+				cmd->resp[i] = a << 16 | b;
+			}
+		} else {
+			a = readw(host->base + MMC_REG_RES_FIFO);
+			b = readw(host->base + MMC_REG_RES_FIFO);
+			c = readw(host->base + MMC_REG_RES_FIFO);
+			cmd->resp[0] = a << 24 | b << 8 | c >> 8;
+		}
+	}
+}
+
+static int mxcmci_poll_status(struct mxcmci_host *host, u32 mask)
+{
+	u32 stat;
+	unsigned long timeout = jiffies + HZ;
+
+	do {
+		stat = readl(host->base + MMC_REG_STATUS);
+		if (stat & STATUS_ERR_MASK)
+			return stat;
+		if (time_after(jiffies, timeout))
+			return STATUS_TIME_OUT_READ;
+		if (stat & mask)
+			return 0;
+		cpu_relax();
+	} while (1);
+}
+
+static int mxcmci_pull(struct mxcmci_host *host, void *_buf, int bytes)
+{
+	unsigned int stat;
+	u32 *buf = _buf;
+
+	while (bytes > 3) {
+		stat = mxcmci_poll_status(host,
+				STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE);
+		if (stat)
+			return stat;
+		*buf++ = readl(host->base + MMC_REG_BUFFER_ACCESS);
+		bytes -= 4;
+	}
+
+	if (bytes) {
+		u8 *b = (u8 *)buf;
+		u32 tmp;
+
+		stat = mxcmci_poll_status(host,
+				STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE);
+		if (stat)
+			return stat;
+		tmp = readl(host->base + MMC_REG_BUFFER_ACCESS);
+		memcpy(b, &tmp, bytes);
+	}
+
+	return 0;
+}
+
+static int mxcmci_push(struct mxcmci_host *host, void *_buf, int bytes)
+{
+	unsigned int stat;
+	u32 *buf = _buf;
+
+	while (bytes > 3) {
+		stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
+		if (stat)
+			return stat;
+		writel(*buf++, host->base + MMC_REG_BUFFER_ACCESS);
+		bytes -= 4;
+	}
+
+	if (bytes) {
+		u8 *b = (u8 *)buf;
+		u32 tmp;
+
+		stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
+		if (stat)
+			return stat;
+
+		memcpy(&tmp, b, bytes);
+		writel(tmp, host->base + MMC_REG_BUFFER_ACCESS);
+	}
+
+	stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
+	if (stat)
+		return stat;
+
+	return 0;
+}
+
+static int mxcmci_transfer_data(struct mxcmci_host *host)
+{
+	struct mmc_data *data = host->req->data;
+	struct scatterlist *sg;
+	int stat, i;
+
+	host->datasize = 0;
+
+	host->data = data;
+	host->datasize = 0;
+
+	if (data->flags & MMC_DATA_READ) {
+		for_each_sg(data->sg, sg, data->sg_len, i) {
+			stat = mxcmci_pull(host, sg_virt(sg), sg->length);
+			if (stat)
+				return stat;
+			host->datasize += sg->length;
+		}
+	} else {
+		for_each_sg(data->sg, sg, data->sg_len, i) {
+			stat = mxcmci_push(host, sg_virt(sg), sg->length);
+			if (stat)
+				return stat;
+			host->datasize += sg->length;
+		}
+		stat = mxcmci_poll_status(host, STATUS_WRITE_OP_DONE);
+		if (stat)
+			return stat;
+	}
+	return 0;
+}
+
+static void mxcmci_datawork(struct work_struct *work)
+{
+	struct mxcmci_host *host = container_of(work, struct mxcmci_host,
+						  datawork);
+	int datastat = mxcmci_transfer_data(host);
+	mxcmci_finish_data(host, datastat);
+
+	if (host->req->stop) {
+		if (mxcmci_start_cmd(host, host->req->stop, 0)) {
+			mxcmci_finish_request(host, host->req);
+			return;
+		}
+	} else {
+		mxcmci_finish_request(host, host->req);
+	}
+}
+
+#ifdef HAS_DMA
+static void mxcmci_data_done(struct mxcmci_host *host, unsigned int stat)
+{
+	struct mmc_data *data = host->data;
+	int data_error;
+
+	if (!data)
+		return;
+
+	data_error = mxcmci_finish_data(host, stat);
+
+	mxcmci_read_response(host, stat);
+	host->cmd = NULL;
+
+	if (host->req->stop) {
+		if (mxcmci_start_cmd(host, host->req->stop, 0)) {
+			mxcmci_finish_request(host, host->req);
+			return;
+		}
+	} else {
+		mxcmci_finish_request(host, host->req);
+	}
+}
+#endif /* HAS_DMA */
+
+static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat)
+{
+	mxcmci_read_response(host, stat);
+	host->cmd = NULL;
+
+	if (!host->data && host->req) {
+		mxcmci_finish_request(host, host->req);
+		return;
+	}
+
+	/* For the DMA case the DMA engine handles the data transfer
+	 * automatically. For non DMA we have to to it ourselves.
+	 * Don't do it in interrupt context though.
+	 */
+	if (!mxcmci_use_dma(host) && host->data)
+		schedule_work(&host->datawork);
+
+}
+
+static irqreturn_t mxcmci_irq(int irq, void *devid)
+{
+	struct mxcmci_host *host = devid;
+	u32 stat;
+
+	stat = readl(host->base + MMC_REG_STATUS);
+	writel(stat, host->base + MMC_REG_STATUS);
+
+	dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat);
+
+	if (stat & STATUS_END_CMD_RESP)
+		mxcmci_cmd_done(host, stat);
+#ifdef HAS_DMA
+	if (mxcmci_use_dma(host) &&
+		  (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE)))
+		mxcmci_data_done(host, stat);
+#endif
+	return IRQ_HANDLED;
+}
+
+static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+	struct mxcmci_host *host = mmc_priv(mmc);
+	unsigned int cmdat = host->cmdat;
+
+	WARN_ON(host->req != NULL);
+
+	host->req = req;
+	host->cmdat &= ~CMD_DAT_CONT_INIT;
+#ifdef HAS_DMA
+	host->do_dma = 1;
+#endif
+	if (req->data) {
+		mxcmci_setup_data(host, req->data);
+
+		cmdat |= CMD_DAT_CONT_DATA_ENABLE;
+
+		if (req->data->flags & MMC_DATA_WRITE)
+			cmdat |= CMD_DAT_CONT_WRITE;
+	}
+
+	if (mxcmci_start_cmd(host, req->cmd, cmdat))
+		mxcmci_finish_request(host, req);
+}
+
+static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios)
+{
+	unsigned int divider;
+	int prescaler = 0;
+	unsigned int clk_in = clk_get_rate(host->clk);
+
+	while (prescaler <= 0x800) {
+		for (divider = 1; divider <= 0xF; divider++) {
+			int x;
+
+			x = (clk_in / (divider + 1));
+
+			if (prescaler)
+				x /= (prescaler * 2);
+
+			if (x <= clk_ios)
+				break;
+		}
+		if (divider < 0x10)
+			break;
+
+		if (prescaler == 0)
+			prescaler = 1;
+		else
+			prescaler <<= 1;
+	}
+
+	writew((prescaler << 4) | divider, host->base + MMC_REG_CLK_RATE);
+
+	dev_dbg(mmc_dev(host->mmc), "scaler: %d divider: %d in: %d out: %d\n",
+			prescaler, divider, clk_in, clk_ios);
+}
+
+static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct mxcmci_host *host = mmc_priv(mmc);
+#ifdef HAS_DMA
+	unsigned int blen;
+	/*
+	 * use burstlen of 64 in 4 bit mode (--> reg value  0)
+	 * use burstlen of 16 in 1 bit mode (--> reg value 16)
+	 */
+	if (ios->bus_width == MMC_BUS_WIDTH_4)
+		blen = 0;
+	else
+		blen = 16;
+
+	imx_dma_config_burstlen(host->dma, blen);
+#endif
+	if (ios->bus_width == MMC_BUS_WIDTH_4)
+		host->cmdat |= CMD_DAT_CONT_BUS_WIDTH_4;
+	else
+		host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4;
+
+	if (host->power_mode != ios->power_mode) {
+		if (host->pdata && host->pdata->setpower)
+			host->pdata->setpower(mmc_dev(mmc), ios->vdd);
+		host->power_mode = ios->power_mode;
+		if (ios->power_mode == MMC_POWER_ON)
+			host->cmdat |= CMD_DAT_CONT_INIT;
+	}
+
+	if (ios->clock) {
+		mxcmci_set_clk_rate(host, ios->clock);
+		writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK);
+	} else {
+		writew(STR_STP_CLK_STOP_CLK, host->base + MMC_REG_STR_STP_CLK);
+	}
+
+	host->clock = ios->clock;
+}
+
+static irqreturn_t mxcmci_detect_irq(int irq, void *data)
+{
+	struct mmc_host *mmc = data;
+
+	dev_dbg(mmc_dev(mmc), "%s\n", __func__);
+
+	mmc_detect_change(mmc, msecs_to_jiffies(250));
+	return IRQ_HANDLED;
+}
+
+static int mxcmci_get_ro(struct mmc_host *mmc)
+{
+	struct mxcmci_host *host = mmc_priv(mmc);
+
+	if (host->pdata && host->pdata->get_ro)
+		return !!host->pdata->get_ro(mmc_dev(mmc));
+	/*
+	 * Board doesn't support read only detection; let the mmc core
+	 * decide what to do.
+	 */
+	return -ENOSYS;
+}
+
+
+static const struct mmc_host_ops mxcmci_ops = {
+	.request	= mxcmci_request,
+	.set_ios	= mxcmci_set_ios,
+	.get_ro		= mxcmci_get_ro,
+};
+
+static int mxcmci_probe(struct platform_device *pdev)
+{
+	struct mmc_host *mmc;
+	struct mxcmci_host *host = NULL;
+	struct resource *r;
+	int ret = 0, irq;
+
+	printk(KERN_INFO "i.MX SDHC driver\n");
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (!r || irq < 0)
+		return -EINVAL;
+
+	r = request_mem_region(r->start, resource_size(r), pdev->name);
+	if (!r)
+		return -EBUSY;
+
+	mmc = mmc_alloc_host(sizeof(struct mxcmci_host), &pdev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto out_release_mem;
+	}
+
+	mmc->ops = &mxcmci_ops;
+	mmc->caps = MMC_CAP_4_BIT_DATA;
+
+	/* MMC core transfer sizes tunable parameters */
+	mmc->max_hw_segs = 64;
+	mmc->max_phys_segs = 64;
+	mmc->max_blk_size = 2048;
+	mmc->max_blk_count = 65535;
+	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+	mmc->max_seg_size = mmc->max_seg_size;
+
+	host = mmc_priv(mmc);
+	host->base = ioremap(r->start, resource_size(r));
+	if (!host->base) {
+		ret = -ENOMEM;
+		goto out_free;
+	}
+
+	host->mmc = mmc;
+	host->pdata = pdev->dev.platform_data;
+
+	if (host->pdata && host->pdata->ocr_avail)
+		mmc->ocr_avail = host->pdata->ocr_avail;
+	else
+		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+	host->res = r;
+	host->irq = irq;
+
+	host->clk = clk_get(&pdev->dev, "sdhc_clk");
+	if (IS_ERR(host->clk)) {
+		ret = PTR_ERR(host->clk);
+		goto out_iounmap;
+	}
+	clk_enable(host->clk);
+
+	mxcmci_softreset(host);
+
+	host->rev_no = readw(host->base + MMC_REG_REV_NO);
+	if (host->rev_no != 0x400) {
+		ret = -ENODEV;
+		dev_err(mmc_dev(host->mmc), "wrong rev.no. 0x%08x. aborting.\n",
+			host->rev_no);
+		goto out_clk_put;
+	}
+
+	mmc->f_min = clk_get_rate(host->clk) >> 7;
+	mmc->f_max = clk_get_rate(host->clk) >> 1;
+
+	/* recommended in data sheet */
+	writew(0x2db4, host->base + MMC_REG_READ_TO);
+
+	writel(0, host->base + MMC_REG_INT_CNTR);
+
+#ifdef HAS_DMA
+	host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW);
+	if (host->dma < 0) {
+		dev_err(mmc_dev(host->mmc), "imx_dma_request_by_prio failed\n");
+		ret = -EBUSY;
+		goto out_clk_put;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!r) {
+		ret = -EINVAL;
+		goto out_free_dma;
+	}
+
+	ret = imx_dma_config_channel(host->dma,
+				     IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO,
+				     IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+				     r->start, 0);
+	if (ret) {
+		dev_err(mmc_dev(host->mmc), "failed to config DMA channel\n");
+		goto out_free_dma;
+	}
+#endif
+	INIT_WORK(&host->datawork, mxcmci_datawork);
+
+	ret = request_irq(host->irq, mxcmci_irq, 0, DRIVER_NAME, host);
+	if (ret)
+		goto out_free_dma;
+
+	platform_set_drvdata(pdev, mmc);
+
+	if (host->pdata && host->pdata->init) {
+		ret = host->pdata->init(&pdev->dev, mxcmci_detect_irq,
+				host->mmc);
+		if (ret)
+			goto out_free_irq;
+	}
+
+	mmc_add_host(mmc);
+
+	return 0;
+
+out_free_irq:
+	free_irq(host->irq, host);
+out_free_dma:
+#ifdef HAS_DMA
+	imx_dma_free(host->dma);
+#endif
+out_clk_put:
+	clk_disable(host->clk);
+	clk_put(host->clk);
+out_iounmap:
+	iounmap(host->base);
+out_free:
+	mmc_free_host(mmc);
+out_release_mem:
+	release_mem_region(host->res->start, resource_size(host->res));
+	return ret;
+}
+
+static int mxcmci_remove(struct platform_device *pdev)
+{
+	struct mmc_host *mmc = platform_get_drvdata(pdev);
+	struct mxcmci_host *host = mmc_priv(mmc);
+
+	platform_set_drvdata(pdev, NULL);
+
+	mmc_remove_host(mmc);
+
+	if (host->pdata && host->pdata->exit)
+		host->pdata->exit(&pdev->dev, mmc);
+
+	free_irq(host->irq, host);
+	iounmap(host->base);
+#ifdef HAS_DMA
+	imx_dma_free(host->dma);
+#endif
+	clk_disable(host->clk);
+	clk_put(host->clk);
+
+	release_mem_region(host->res->start, resource_size(host->res));
+	release_resource(host->res);
+
+	mmc_free_host(mmc);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int mxcmci_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct mmc_host *mmc = platform_get_drvdata(dev);
+	int ret = 0;
+
+	if (mmc)
+		ret = mmc_suspend_host(mmc, state);
+
+	return ret;
+}
+
+static int mxcmci_resume(struct platform_device *dev)
+{
+	struct mmc_host *mmc = platform_get_drvdata(dev);
+	struct mxcmci_host *host;
+	int ret = 0;
+
+	if (mmc) {
+		host = mmc_priv(mmc);
+		ret = mmc_resume_host(mmc);
+	}
+
+	return ret;
+}
+#else
+#define mxcmci_suspend  NULL
+#define mxcmci_resume   NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver mxcmci_driver = {
+	.probe		= mxcmci_probe,
+	.remove		= mxcmci_remove,
+	.suspend	= mxcmci_suspend,
+	.resume		= mxcmci_resume,
+	.driver		= {
+		.name		= DRIVER_NAME,
+		.owner		= THIS_MODULE,
+	}
+};
+
+static int __init mxcmci_init(void)
+{
+	return platform_driver_register(&mxcmci_driver);
+}
+
+static void __exit mxcmci_exit(void)
+{
+	platform_driver_unregister(&mxcmci_driver);
+}
+
+module_init(mxcmci_init);
+module_exit(mxcmci_exit);
+
+MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver");
+MODULE_AUTHOR("Sascha Hauer, Pengutronix");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:imx-mmc");
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
new file mode 100644
index 00000000000..db37490f67e
--- /dev/null
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -0,0 +1,1242 @@
+/*
+ * drivers/mmc/host/omap_hsmmc.c
+ *
+ * Driver for OMAP2430/3430 MMC controller.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ *
+ * Authors:
+ *	Syed Mohammed Khasim	<x0khasim@ti.com>
+ *	Madhusudhan		<madhu.cr@ti.com>
+ *	Mohit Jalori		<mjalori@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/mmc/host.h>
+#include <linux/io.h>
+#include <linux/semaphore.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/mmc.h>
+#include <mach/cpu.h>
+
+/* OMAP HSMMC Host Controller Registers */
+#define OMAP_HSMMC_SYSCONFIG	0x0010
+#define OMAP_HSMMC_CON		0x002C
+#define OMAP_HSMMC_BLK		0x0104
+#define OMAP_HSMMC_ARG		0x0108
+#define OMAP_HSMMC_CMD		0x010C
+#define OMAP_HSMMC_RSP10	0x0110
+#define OMAP_HSMMC_RSP32	0x0114
+#define OMAP_HSMMC_RSP54	0x0118
+#define OMAP_HSMMC_RSP76	0x011C
+#define OMAP_HSMMC_DATA		0x0120
+#define OMAP_HSMMC_HCTL		0x0128
+#define OMAP_HSMMC_SYSCTL	0x012C
+#define OMAP_HSMMC_STAT		0x0130
+#define OMAP_HSMMC_IE		0x0134
+#define OMAP_HSMMC_ISE		0x0138
+#define OMAP_HSMMC_CAPA		0x0140
+
+#define VS18			(1 << 26)
+#define VS30			(1 << 25)
+#define SDVS18			(0x5 << 9)
+#define SDVS30			(0x6 << 9)
+#define SDVSCLR			0xFFFFF1FF
+#define SDVSDET			0x00000400
+#define AUTOIDLE		0x1
+#define SDBP			(1 << 8)
+#define DTO			0xe
+#define ICE			0x1
+#define ICS			0x2
+#define CEN			(1 << 2)
+#define CLKD_MASK		0x0000FFC0
+#define CLKD_SHIFT		6
+#define DTO_MASK		0x000F0000
+#define DTO_SHIFT		16
+#define INT_EN_MASK		0x307F0033
+#define INIT_STREAM		(1 << 1)
+#define DP_SELECT		(1 << 21)
+#define DDIR			(1 << 4)
+#define DMA_EN			0x1
+#define MSBS			(1 << 5)
+#define BCE			(1 << 1)
+#define FOUR_BIT		(1 << 1)
+#define CC			0x1
+#define TC			0x02
+#define OD			0x1
+#define ERR			(1 << 15)
+#define CMD_TIMEOUT		(1 << 16)
+#define DATA_TIMEOUT		(1 << 20)
+#define CMD_CRC			(1 << 17)
+#define DATA_CRC		(1 << 21)
+#define CARD_ERR		(1 << 28)
+#define STAT_CLEAR		0xFFFFFFFF
+#define INIT_STREAM_CMD		0x00000000
+#define DUAL_VOLT_OCR_BIT	7
+#define SRC			(1 << 25)
+#define SRD			(1 << 26)
+
+/*
+ * FIXME: Most likely all the data using these _DEVID defines should come
+ * from the platform_data, or implemented in controller and slot specific
+ * functions.
+ */
+#define OMAP_MMC1_DEVID		0
+#define OMAP_MMC2_DEVID		1
+
+#define OMAP_MMC_DATADIR_NONE	0
+#define OMAP_MMC_DATADIR_READ	1
+#define OMAP_MMC_DATADIR_WRITE	2
+#define MMC_TIMEOUT_MS		20
+#define OMAP_MMC_MASTER_CLOCK	96000000
+#define DRIVER_NAME		"mmci-omap-hs"
+
+/*
+ * One controller can have multiple slots, like on some omap boards using
+ * omap.c controller driver. Luckily this is not currently done on any known
+ * omap_hsmmc.c device.
+ */
+#define mmc_slot(host)		(host->pdata->slots[host->slot_id])
+
+/*
+ * MMC Host controller read/write API's
+ */
+#define OMAP_HSMMC_READ(base, reg)	\
+	__raw_readl((base) + OMAP_HSMMC_##reg)
+
+#define OMAP_HSMMC_WRITE(base, reg, val) \
+	__raw_writel((val), (base) + OMAP_HSMMC_##reg)
+
+struct mmc_omap_host {
+	struct	device		*dev;
+	struct	mmc_host	*mmc;
+	struct	mmc_request	*mrq;
+	struct	mmc_command	*cmd;
+	struct	mmc_data	*data;
+	struct	clk		*fclk;
+	struct	clk		*iclk;
+	struct	clk		*dbclk;
+	struct	semaphore	sem;
+	struct	work_struct	mmc_carddetect_work;
+	void	__iomem		*base;
+	resource_size_t		mapbase;
+	unsigned int		id;
+	unsigned int		dma_len;
+	unsigned int		dma_dir;
+	unsigned char		bus_mode;
+	unsigned char		datadir;
+	u32			*buffer;
+	u32			bytesleft;
+	int			suspended;
+	int			irq;
+	int			carddetect;
+	int			use_dma, dma_ch;
+	int			initstr;
+	int			slot_id;
+	int			dbclk_enabled;
+	struct	omap_mmc_platform_data	*pdata;
+};
+
+/*
+ * Stop clock to the card
+ */
+static void omap_mmc_stop_clock(struct mmc_omap_host *host)
+{
+	OMAP_HSMMC_WRITE(host->base, SYSCTL,
+		OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN);
+	if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0)
+		dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n");
+}
+
+/*
+ * Send init stream sequence to card
+ * before sending IDLE command
+ */
+static void send_init_stream(struct mmc_omap_host *host)
+{
+	int reg = 0;
+	unsigned long timeout;
+
+	disable_irq(host->irq);
+	OMAP_HSMMC_WRITE(host->base, CON,
+		OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM);
+	OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD);
+
+	timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
+	while ((reg != CC) && time_before(jiffies, timeout))
+		reg = OMAP_HSMMC_READ(host->base, STAT) & CC;
+
+	OMAP_HSMMC_WRITE(host->base, CON,
+		OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM);
+	enable_irq(host->irq);
+}
+
+static inline
+int mmc_omap_cover_is_closed(struct mmc_omap_host *host)
+{
+	int r = 1;
+
+	if (host->pdata->slots[host->slot_id].get_cover_state)
+		r = host->pdata->slots[host->slot_id].get_cover_state(host->dev,
+			host->slot_id);
+	return r;
+}
+
+static ssize_t
+mmc_omap_show_cover_switch(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
+	struct mmc_omap_host *host = mmc_priv(mmc);
+
+	return sprintf(buf, "%s\n", mmc_omap_cover_is_closed(host) ? "closed" :
+		       "open");
+}
+
+static DEVICE_ATTR(cover_switch, S_IRUGO, mmc_omap_show_cover_switch, NULL);
+
+static ssize_t
+mmc_omap_show_slot_name(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
+	struct mmc_omap_host *host = mmc_priv(mmc);
+	struct omap_mmc_slot_data slot = host->pdata->slots[host->slot_id];
+
+	return sprintf(buf, "slot:%s\n", slot.name);
+}
+
+static DEVICE_ATTR(slot_name, S_IRUGO, mmc_omap_show_slot_name, NULL);
+
+/*
+ * Configure the response type and send the cmd.
+ */
+static void
+mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd,
+	struct mmc_data *data)
+{
+	int cmdreg = 0, resptype = 0, cmdtype = 0;
+
+	dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n",
+		mmc_hostname(host->mmc), cmd->opcode, cmd->arg);
+	host->cmd = cmd;
+
+	/*
+	 * Clear status bits and enable interrupts
+	 */
+	OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
+	OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
+	OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136)
+			resptype = 1;
+		else
+			resptype = 2;
+	}
+
+	/*
+	 * Unlike OMAP1 controller, the cmdtype does not seem to be based on
+	 * ac, bc, adtc, bcr. Only commands ending an open ended transfer need
+	 * a val of 0x3, rest 0x0.
+	 */
+	if (cmd == host->mrq->stop)
+		cmdtype = 0x3;
+
+	cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
+
+	if (data) {
+		cmdreg |= DP_SELECT | MSBS | BCE;
+		if (data->flags & MMC_DATA_READ)
+			cmdreg |= DDIR;
+		else
+			cmdreg &= ~(DDIR);
+	}
+
+	if (host->use_dma)
+		cmdreg |= DMA_EN;
+
+	OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg);
+	OMAP_HSMMC_WRITE(host->base, CMD, cmdreg);
+}
+
+/*
+ * Notify the transfer complete to MMC core
+ */
+static void
+mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
+{
+	host->data = NULL;
+
+	if (host->use_dma && host->dma_ch != -1)
+		dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
+			host->dma_dir);
+
+	host->datadir = OMAP_MMC_DATADIR_NONE;
+
+	if (!data->error)
+		data->bytes_xfered += data->blocks * (data->blksz);
+	else
+		data->bytes_xfered = 0;
+
+	if (!data->stop) {
+		host->mrq = NULL;
+		mmc_request_done(host->mmc, data->mrq);
+		return;
+	}
+	mmc_omap_start_command(host, data->stop, NULL);
+}
+
+/*
+ * Notify the core about command completion
+ */
+static void
+mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
+{
+	host->cmd = NULL;
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136) {
+			/* response type 2 */
+			cmd->resp[3] = OMAP_HSMMC_READ(host->base, RSP10);
+			cmd->resp[2] = OMAP_HSMMC_READ(host->base, RSP32);
+			cmd->resp[1] = OMAP_HSMMC_READ(host->base, RSP54);
+			cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP76);
+		} else {
+			/* response types 1, 1b, 3, 4, 5, 6 */
+			cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10);
+		}
+	}
+	if (host->data == NULL || cmd->error) {
+		host->mrq = NULL;
+		mmc_request_done(host->mmc, cmd->mrq);
+	}
+}
+
+/*
+ * DMA clean up for command errors
+ */
+static void mmc_dma_cleanup(struct mmc_omap_host *host)
+{
+	host->data->error = -ETIMEDOUT;
+
+	if (host->use_dma && host->dma_ch != -1) {
+		dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len,
+			host->dma_dir);
+		omap_free_dma(host->dma_ch);
+		host->dma_ch = -1;
+		up(&host->sem);
+	}
+	host->data = NULL;
+	host->datadir = OMAP_MMC_DATADIR_NONE;
+}
+
+/*
+ * Readable error output
+ */
+#ifdef CONFIG_MMC_DEBUG
+static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status)
+{
+	/* --- means reserved bit without definition at documentation */
+	static const char *mmc_omap_status_bits[] = {
+		"CC", "TC", "BGE", "---", "BWR", "BRR", "---", "---", "CIRQ",
+		"OBI", "---", "---", "---", "---", "---", "ERRI", "CTO", "CCRC",
+		"CEB", "CIE", "DTO", "DCRC", "DEB", "---", "ACE", "---",
+		"---", "---", "---", "CERR", "CERR", "BADA", "---", "---", "---"
+	};
+	char res[256];
+	char *buf = res;
+	int len, i;
+
+	len = sprintf(buf, "MMC IRQ 0x%x :", status);
+	buf += len;
+
+	for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++)
+		if (status & (1 << i)) {
+			len = sprintf(buf, " %s", mmc_omap_status_bits[i]);
+			buf += len;
+		}
+
+	dev_dbg(mmc_dev(host->mmc), "%s\n", res);
+}
+#endif  /* CONFIG_MMC_DEBUG */
+
+
+/*
+ * MMC controller IRQ handler
+ */
+static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
+{
+	struct mmc_omap_host *host = dev_id;
+	struct mmc_data *data;
+	int end_cmd = 0, end_trans = 0, status;
+
+	if (host->cmd == NULL && host->data == NULL) {
+		OMAP_HSMMC_WRITE(host->base, STAT,
+			OMAP_HSMMC_READ(host->base, STAT));
+		return IRQ_HANDLED;
+	}
+
+	data = host->data;
+	status = OMAP_HSMMC_READ(host->base, STAT);
+	dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
+
+	if (status & ERR) {
+#ifdef CONFIG_MMC_DEBUG
+		mmc_omap_report_irq(host, status);
+#endif
+		if ((status & CMD_TIMEOUT) ||
+			(status & CMD_CRC)) {
+			if (host->cmd) {
+				if (status & CMD_TIMEOUT) {
+					OMAP_HSMMC_WRITE(host->base, SYSCTL,
+						OMAP_HSMMC_READ(host->base,
+								SYSCTL) | SRC);
+					while (OMAP_HSMMC_READ(host->base,
+							SYSCTL) & SRC)
+						;
+
+					host->cmd->error = -ETIMEDOUT;
+				} else {
+					host->cmd->error = -EILSEQ;
+				}
+				end_cmd = 1;
+			}
+			if (host->data)
+				mmc_dma_cleanup(host);
+		}
+		if ((status & DATA_TIMEOUT) ||
+			(status & DATA_CRC)) {
+			if (host->data) {
+				if (status & DATA_TIMEOUT)
+					mmc_dma_cleanup(host);
+				else
+					host->data->error = -EILSEQ;
+				OMAP_HSMMC_WRITE(host->base, SYSCTL,
+					OMAP_HSMMC_READ(host->base,
+							SYSCTL) | SRD);
+				while (OMAP_HSMMC_READ(host->base,
+						SYSCTL) & SRD)
+					;
+				end_trans = 1;
+			}
+		}
+		if (status & CARD_ERR) {
+			dev_dbg(mmc_dev(host->mmc),
+				"Ignoring card err CMD%d\n", host->cmd->opcode);
+			if (host->cmd)
+				end_cmd = 1;
+			if (host->data)
+				end_trans = 1;
+		}
+	}
+
+	OMAP_HSMMC_WRITE(host->base, STAT, status);
+
+	if (end_cmd || (status & CC))
+		mmc_omap_cmd_done(host, host->cmd);
+	if (end_trans || (status & TC))
+		mmc_omap_xfer_done(host, data);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Switch MMC operating voltage
+ */
+static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
+{
+	u32 reg_val = 0;
+	int ret;
+
+	/* Disable the clocks */
+	clk_disable(host->fclk);
+	clk_disable(host->iclk);
+	clk_disable(host->dbclk);
+
+	/* Turn the power off */
+	ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
+	if (ret != 0)
+		goto err;
+
+	/* Turn the power ON with given VDD 1.8 or 3.0v */
+	ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd);
+	if (ret != 0)
+		goto err;
+
+	clk_enable(host->fclk);
+	clk_enable(host->iclk);
+	clk_enable(host->dbclk);
+
+	OMAP_HSMMC_WRITE(host->base, HCTL,
+		OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
+	reg_val = OMAP_HSMMC_READ(host->base, HCTL);
+	/*
+	 * If a MMC dual voltage card is detected, the set_ios fn calls
+	 * this fn with VDD bit set for 1.8V. Upon card removal from the
+	 * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF.
+	 *
+	 * Only MMC1 supports 3.0V.  MMC2 will not function if SDVS30 is
+	 * set in HCTL.
+	 */
+	if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) ||
+				((1 << vdd) == MMC_VDD_33_34)))
+		reg_val |= SDVS30;
+	if ((1 << vdd) == MMC_VDD_165_195)
+		reg_val |= SDVS18;
+
+	OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
+
+	OMAP_HSMMC_WRITE(host->base, HCTL,
+		OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
+
+	return 0;
+err:
+	dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n");
+	return ret;
+}
+
+/*
+ * Work Item to notify the core about card insertion/removal
+ */
+static void mmc_omap_detect(struct work_struct *work)
+{
+	struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
+						mmc_carddetect_work);
+
+	sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
+	if (host->carddetect) {
+		mmc_detect_change(host->mmc, (HZ * 200) / 1000);
+	} else {
+		OMAP_HSMMC_WRITE(host->base, SYSCTL,
+			OMAP_HSMMC_READ(host->base, SYSCTL) | SRD);
+		while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD)
+			;
+
+		mmc_detect_change(host->mmc, (HZ * 50) / 1000);
+	}
+}
+
+/*
+ * ISR for handling card insertion and removal
+ */
+static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id)
+{
+	struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id;
+
+	host->carddetect = mmc_slot(host).card_detect(irq);
+	schedule_work(&host->mmc_carddetect_work);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * DMA call back function
+ */
+static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data)
+{
+	struct mmc_omap_host *host = data;
+
+	if (ch_status & OMAP2_DMA_MISALIGNED_ERR_IRQ)
+		dev_dbg(mmc_dev(host->mmc), "MISALIGNED_ADRS_ERR\n");
+
+	if (host->dma_ch < 0)
+		return;
+
+	omap_free_dma(host->dma_ch);
+	host->dma_ch = -1;
+	/*
+	 * DMA Callback: run in interrupt context.
+	 * mutex_unlock will through a kernel warning if used.
+	 */
+	up(&host->sem);
+}
+
+/*
+ * Configure dma src and destination parameters
+ */
+static int mmc_omap_config_dma_param(int sync_dir, struct mmc_omap_host *host,
+				struct mmc_data *data)
+{
+	if (sync_dir == 0) {
+		omap_set_dma_dest_params(host->dma_ch, 0,
+			OMAP_DMA_AMODE_CONSTANT,
+			(host->mapbase + OMAP_HSMMC_DATA), 0, 0);
+		omap_set_dma_src_params(host->dma_ch, 0,
+			OMAP_DMA_AMODE_POST_INC,
+			sg_dma_address(&data->sg[0]), 0, 0);
+	} else {
+		omap_set_dma_src_params(host->dma_ch, 0,
+			OMAP_DMA_AMODE_CONSTANT,
+			(host->mapbase + OMAP_HSMMC_DATA), 0, 0);
+		omap_set_dma_dest_params(host->dma_ch, 0,
+			OMAP_DMA_AMODE_POST_INC,
+			sg_dma_address(&data->sg[0]), 0, 0);
+	}
+	return 0;
+}
+/*
+ * Routine to configure and start DMA for the MMC card
+ */
+static int
+mmc_omap_start_dma_transfer(struct mmc_omap_host *host, struct mmc_request *req)
+{
+	int sync_dev, sync_dir = 0;
+	int dma_ch = 0, ret = 0, err = 1;
+	struct mmc_data *data = req->data;
+
+	/*
+	 * If for some reason the DMA transfer is still active,
+	 * we wait for timeout period and free the dma
+	 */
+	if (host->dma_ch != -1) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(100);
+		if (down_trylock(&host->sem)) {
+			omap_free_dma(host->dma_ch);
+			host->dma_ch = -1;
+			up(&host->sem);
+			return err;
+		}
+	} else {
+		if (down_trylock(&host->sem))
+			return err;
+	}
+
+	if (!(data->flags & MMC_DATA_WRITE)) {
+		host->dma_dir = DMA_FROM_DEVICE;
+		if (host->id == OMAP_MMC1_DEVID)
+			sync_dev = OMAP24XX_DMA_MMC1_RX;
+		else
+			sync_dev = OMAP24XX_DMA_MMC2_RX;
+	} else {
+		host->dma_dir = DMA_TO_DEVICE;
+		if (host->id == OMAP_MMC1_DEVID)
+			sync_dev = OMAP24XX_DMA_MMC1_TX;
+		else
+			sync_dev = OMAP24XX_DMA_MMC2_TX;
+	}
+
+	ret = omap_request_dma(sync_dev, "MMC/SD", mmc_omap_dma_cb,
+			host, &dma_ch);
+	if (ret != 0) {
+		dev_dbg(mmc_dev(host->mmc),
+			"%s: omap_request_dma() failed with %d\n",
+			mmc_hostname(host->mmc), ret);
+		return ret;
+	}
+
+	host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
+			data->sg_len, host->dma_dir);
+	host->dma_ch = dma_ch;
+
+	if (!(data->flags & MMC_DATA_WRITE))
+		mmc_omap_config_dma_param(1, host, data);
+	else
+		mmc_omap_config_dma_param(0, host, data);
+
+	if ((data->blksz % 4) == 0)
+		omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S32,
+			(data->blksz / 4), data->blocks, OMAP_DMA_SYNC_FRAME,
+			sync_dev, sync_dir);
+	else
+		/* REVISIT: The MMC buffer increments only when MSB is written.
+		 * Return error for blksz which is non multiple of four.
+		 */
+		return -EINVAL;
+
+	omap_start_dma(dma_ch);
+	return 0;
+}
+
+static void set_data_timeout(struct mmc_omap_host *host,
+			     struct mmc_request *req)
+{
+	unsigned int timeout, cycle_ns;
+	uint32_t reg, clkd, dto = 0;
+
+	reg = OMAP_HSMMC_READ(host->base, SYSCTL);
+	clkd = (reg & CLKD_MASK) >> CLKD_SHIFT;
+	if (clkd == 0)
+		clkd = 1;
+
+	cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd);
+	timeout = req->data->timeout_ns / cycle_ns;
+	timeout += req->data->timeout_clks;
+	if (timeout) {
+		while ((timeout & 0x80000000) == 0) {
+			dto += 1;
+			timeout <<= 1;
+		}
+		dto = 31 - dto;
+		timeout <<= 1;
+		if (timeout && dto)
+			dto += 1;
+		if (dto >= 13)
+			dto -= 13;
+		else
+			dto = 0;
+		if (dto > 14)
+			dto = 14;
+	}
+
+	reg &= ~DTO_MASK;
+	reg |= dto << DTO_SHIFT;
+	OMAP_HSMMC_WRITE(host->base, SYSCTL, reg);
+}
+
+/*
+ * Configure block length for MMC/SD cards and initiate the transfer.
+ */
+static int
+mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
+{
+	int ret;
+	host->data = req->data;
+
+	if (req->data == NULL) {
+		host->datadir = OMAP_MMC_DATADIR_NONE;
+		OMAP_HSMMC_WRITE(host->base, BLK, 0);
+		return 0;
+	}
+
+	OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz)
+					| (req->data->blocks << 16));
+	set_data_timeout(host, req);
+
+	host->datadir = (req->data->flags & MMC_DATA_WRITE) ?
+			OMAP_MMC_DATADIR_WRITE : OMAP_MMC_DATADIR_READ;
+
+	if (host->use_dma) {
+		ret = mmc_omap_start_dma_transfer(host, req);
+		if (ret != 0) {
+			dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n");
+			return ret;
+		}
+	}
+	return 0;
+}
+
+/*
+ * Request function. for read/write operation
+ */
+static void omap_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+	struct mmc_omap_host *host = mmc_priv(mmc);
+
+	WARN_ON(host->mrq != NULL);
+	host->mrq = req;
+	mmc_omap_prepare_data(host, req);
+	mmc_omap_start_command(host, req->cmd, req->data);
+}
+
+
+/* Routine to configure clock values. Exposed API to core */
+static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct mmc_omap_host *host = mmc_priv(mmc);
+	u16 dsor = 0;
+	unsigned long regval;
+	unsigned long timeout;
+
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF:
+		mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
+		/*
+		 * Reset bus voltage to 3V if it got set to 1.8V earlier.
+		 * REVISIT: If we are able to detect cards after unplugging
+		 * a 1.8V card, this code should not be needed.
+		 */
+		if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
+			int vdd = fls(host->mmc->ocr_avail) - 1;
+			if (omap_mmc_switch_opcond(host, vdd) != 0)
+				host->mmc->ios.vdd = vdd;
+		}
+		break;
+	case MMC_POWER_UP:
+		mmc_slot(host).set_power(host->dev, host->slot_id, 1, ios->vdd);
+		break;
+	}
+
+	switch (mmc->ios.bus_width) {
+	case MMC_BUS_WIDTH_4:
+		OMAP_HSMMC_WRITE(host->base, HCTL,
+			OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT);
+		break;
+	case MMC_BUS_WIDTH_1:
+		OMAP_HSMMC_WRITE(host->base, HCTL,
+			OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT);
+		break;
+	}
+
+	if (host->id == OMAP_MMC1_DEVID) {
+		/* Only MMC1 can operate at 3V/1.8V */
+		if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
+			(ios->vdd == DUAL_VOLT_OCR_BIT)) {
+				/*
+				 * The mmc_select_voltage fn of the core does
+				 * not seem to set the power_mode to
+				 * MMC_POWER_UP upon recalculating the voltage.
+				 * vdd 1.8v.
+				 */
+				if (omap_mmc_switch_opcond(host, ios->vdd) != 0)
+					dev_dbg(mmc_dev(host->mmc),
+						"Switch operation failed\n");
+		}
+	}
+
+	if (ios->clock) {
+		dsor = OMAP_MMC_MASTER_CLOCK / ios->clock;
+		if (dsor < 1)
+			dsor = 1;
+
+		if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock)
+			dsor++;
+
+		if (dsor > 250)
+			dsor = 250;
+	}
+	omap_mmc_stop_clock(host);
+	regval = OMAP_HSMMC_READ(host->base, SYSCTL);
+	regval = regval & ~(CLKD_MASK);
+	regval = regval | (dsor << 6) | (DTO << 16);
+	OMAP_HSMMC_WRITE(host->base, SYSCTL, regval);
+	OMAP_HSMMC_WRITE(host->base, SYSCTL,
+		OMAP_HSMMC_READ(host->base, SYSCTL) | ICE);
+
+	/* Wait till the ICS bit is set */
+	timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
+	while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != 0x2
+		&& time_before(jiffies, timeout))
+		msleep(1);
+
+	OMAP_HSMMC_WRITE(host->base, SYSCTL,
+		OMAP_HSMMC_READ(host->base, SYSCTL) | CEN);
+
+	if (ios->power_mode == MMC_POWER_ON)
+		send_init_stream(host);
+
+	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
+		OMAP_HSMMC_WRITE(host->base, CON,
+				OMAP_HSMMC_READ(host->base, CON) | OD);
+}
+
+static int omap_hsmmc_get_cd(struct mmc_host *mmc)
+{
+	struct mmc_omap_host *host = mmc_priv(mmc);
+	struct omap_mmc_platform_data *pdata = host->pdata;
+
+	if (!pdata->slots[0].card_detect)
+		return -ENOSYS;
+	return pdata->slots[0].card_detect(pdata->slots[0].card_detect_irq);
+}
+
+static int omap_hsmmc_get_ro(struct mmc_host *mmc)
+{
+	struct mmc_omap_host *host = mmc_priv(mmc);
+	struct omap_mmc_platform_data *pdata = host->pdata;
+
+	if (!pdata->slots[0].get_ro)
+		return -ENOSYS;
+	return pdata->slots[0].get_ro(host->dev, 0);
+}
+
+static struct mmc_host_ops mmc_omap_ops = {
+	.request = omap_mmc_request,
+	.set_ios = omap_mmc_set_ios,
+	.get_cd = omap_hsmmc_get_cd,
+	.get_ro = omap_hsmmc_get_ro,
+	/* NYET -- enable_sdio_irq */
+};
+
+static int __init omap_mmc_probe(struct platform_device *pdev)
+{
+	struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
+	struct mmc_host *mmc;
+	struct mmc_omap_host *host = NULL;
+	struct resource *res;
+	int ret = 0, irq;
+	u32 hctl, capa;
+
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "Platform Data is missing\n");
+		return -ENXIO;
+	}
+
+	if (pdata->nr_slots == 0) {
+		dev_err(&pdev->dev, "No Slots\n");
+		return -ENXIO;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (res == NULL || irq < 0)
+		return -ENXIO;
+
+	res = request_mem_region(res->start, res->end - res->start + 1,
+							pdev->name);
+	if (res == NULL)
+		return -EBUSY;
+
+	mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	host		= mmc_priv(mmc);
+	host->mmc	= mmc;
+	host->pdata	= pdata;
+	host->dev	= &pdev->dev;
+	host->use_dma	= 1;
+	host->dev->dma_mask = &pdata->dma_mask;
+	host->dma_ch	= -1;
+	host->irq	= irq;
+	host->id	= pdev->id;
+	host->slot_id	= 0;
+	host->mapbase	= res->start;
+	host->base	= ioremap(host->mapbase, SZ_4K);
+
+	platform_set_drvdata(pdev, host);
+	INIT_WORK(&host->mmc_carddetect_work, mmc_omap_detect);
+
+	mmc->ops	= &mmc_omap_ops;
+	mmc->f_min	= 400000;
+	mmc->f_max	= 52000000;
+
+	sema_init(&host->sem, 1);
+
+	host->iclk = clk_get(&pdev->dev, "mmchs_ick");
+	if (IS_ERR(host->iclk)) {
+		ret = PTR_ERR(host->iclk);
+		host->iclk = NULL;
+		goto err1;
+	}
+	host->fclk = clk_get(&pdev->dev, "mmchs_fck");
+	if (IS_ERR(host->fclk)) {
+		ret = PTR_ERR(host->fclk);
+		host->fclk = NULL;
+		clk_put(host->iclk);
+		goto err1;
+	}
+
+	if (clk_enable(host->fclk) != 0) {
+		clk_put(host->iclk);
+		clk_put(host->fclk);
+		goto err1;
+	}
+
+	if (clk_enable(host->iclk) != 0) {
+		clk_disable(host->fclk);
+		clk_put(host->iclk);
+		clk_put(host->fclk);
+		goto err1;
+	}
+
+	host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck");
+	/*
+	 * MMC can still work without debounce clock.
+	 */
+	if (IS_ERR(host->dbclk))
+		dev_warn(mmc_dev(host->mmc), "Failed to get debounce clock\n");
+	else
+		if (clk_enable(host->dbclk) != 0)
+			dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
+							" clk failed\n");
+		else
+			host->dbclk_enabled = 1;
+
+#ifdef CONFIG_MMC_BLOCK_BOUNCE
+	mmc->max_phys_segs = 1;
+	mmc->max_hw_segs = 1;
+#endif
+	mmc->max_blk_size = 512;       /* Block Length at max can be 1024 */
+	mmc->max_blk_count = 0xFFFF;    /* No. of Blocks is 16 bits */
+	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+	mmc->max_seg_size = mmc->max_req_size;
+
+	mmc->ocr_avail = mmc_slot(host).ocr_mask;
+	mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
+
+	if (pdata->slots[host->slot_id].wires >= 4)
+		mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+	/* Only MMC1 supports 3.0V */
+	if (host->id == OMAP_MMC1_DEVID) {
+		hctl = SDVS30;
+		capa = VS30 | VS18;
+	} else {
+		hctl = SDVS18;
+		capa = VS18;
+	}
+
+	OMAP_HSMMC_WRITE(host->base, HCTL,
+			OMAP_HSMMC_READ(host->base, HCTL) | hctl);
+
+	OMAP_HSMMC_WRITE(host->base, CAPA,
+			OMAP_HSMMC_READ(host->base, CAPA) | capa);
+
+	/* Set the controller to AUTO IDLE mode */
+	OMAP_HSMMC_WRITE(host->base, SYSCONFIG,
+			OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE);
+
+	/* Set SD bus power bit */
+	OMAP_HSMMC_WRITE(host->base, HCTL,
+			OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
+
+	/* Request IRQ for MMC operations */
+	ret = request_irq(host->irq, mmc_omap_irq, IRQF_DISABLED,
+			mmc_hostname(mmc), host);
+	if (ret) {
+		dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
+		goto err_irq;
+	}
+
+	if (pdata->init != NULL) {
+		if (pdata->init(&pdev->dev) != 0) {
+			dev_dbg(mmc_dev(host->mmc),
+				"Unable to configure MMC IRQs\n");
+			goto err_irq_cd_init;
+		}
+	}
+
+	/* Request IRQ for card detect */
+	if ((mmc_slot(host).card_detect_irq) && (mmc_slot(host).card_detect)) {
+		ret = request_irq(mmc_slot(host).card_detect_irq,
+				  omap_mmc_cd_handler,
+				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
+					  | IRQF_DISABLED,
+				  mmc_hostname(mmc), host);
+		if (ret) {
+			dev_dbg(mmc_dev(host->mmc),
+				"Unable to grab MMC CD IRQ\n");
+			goto err_irq_cd;
+		}
+	}
+
+	OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
+	OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
+
+	mmc_add_host(mmc);
+
+	if (host->pdata->slots[host->slot_id].name != NULL) {
+		ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name);
+		if (ret < 0)
+			goto err_slot_name;
+	}
+	if (mmc_slot(host).card_detect_irq && mmc_slot(host).card_detect &&
+			host->pdata->slots[host->slot_id].get_cover_state) {
+		ret = device_create_file(&mmc->class_dev,
+					&dev_attr_cover_switch);
+		if (ret < 0)
+			goto err_cover_switch;
+	}
+
+	return 0;
+
+err_cover_switch:
+	device_remove_file(&mmc->class_dev, &dev_attr_cover_switch);
+err_slot_name:
+	mmc_remove_host(mmc);
+err_irq_cd:
+	free_irq(mmc_slot(host).card_detect_irq, host);
+err_irq_cd_init:
+	free_irq(host->irq, host);
+err_irq:
+	clk_disable(host->fclk);
+	clk_disable(host->iclk);
+	clk_put(host->fclk);
+	clk_put(host->iclk);
+	if (host->dbclk_enabled) {
+		clk_disable(host->dbclk);
+		clk_put(host->dbclk);
+	}
+
+err1:
+	iounmap(host->base);
+err:
+	dev_dbg(mmc_dev(host->mmc), "Probe Failed\n");
+	release_mem_region(res->start, res->end - res->start + 1);
+	if (host)
+		mmc_free_host(mmc);
+	return ret;
+}
+
+static int omap_mmc_remove(struct platform_device *pdev)
+{
+	struct mmc_omap_host *host = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	if (host) {
+		mmc_remove_host(host->mmc);
+		if (host->pdata->cleanup)
+			host->pdata->cleanup(&pdev->dev);
+		free_irq(host->irq, host);
+		if (mmc_slot(host).card_detect_irq)
+			free_irq(mmc_slot(host).card_detect_irq, host);
+		flush_scheduled_work();
+
+		clk_disable(host->fclk);
+		clk_disable(host->iclk);
+		clk_put(host->fclk);
+		clk_put(host->iclk);
+		if (host->dbclk_enabled) {
+			clk_disable(host->dbclk);
+			clk_put(host->dbclk);
+		}
+
+		mmc_free_host(host->mmc);
+		iounmap(host->base);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res)
+		release_mem_region(res->start, res->end - res->start + 1);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	int ret = 0;
+	struct mmc_omap_host *host = platform_get_drvdata(pdev);
+
+	if (host && host->suspended)
+		return 0;
+
+	if (host) {
+		ret = mmc_suspend_host(host->mmc, state);
+		if (ret == 0) {
+			host->suspended = 1;
+
+			OMAP_HSMMC_WRITE(host->base, ISE, 0);
+			OMAP_HSMMC_WRITE(host->base, IE, 0);
+
+			if (host->pdata->suspend) {
+				ret = host->pdata->suspend(&pdev->dev,
+								host->slot_id);
+				if (ret)
+					dev_dbg(mmc_dev(host->mmc),
+						"Unable to handle MMC board"
+						" level suspend\n");
+			}
+
+			if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
+				OMAP_HSMMC_WRITE(host->base, HCTL,
+					OMAP_HSMMC_READ(host->base, HCTL)
+					& SDVSCLR);
+				OMAP_HSMMC_WRITE(host->base, HCTL,
+					OMAP_HSMMC_READ(host->base, HCTL)
+					| SDVS30);
+				OMAP_HSMMC_WRITE(host->base, HCTL,
+					OMAP_HSMMC_READ(host->base, HCTL)
+					| SDBP);
+			}
+
+			clk_disable(host->fclk);
+			clk_disable(host->iclk);
+			clk_disable(host->dbclk);
+		}
+
+	}
+	return ret;
+}
+
+/* Routine to resume the MMC device */
+static int omap_mmc_resume(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct mmc_omap_host *host = platform_get_drvdata(pdev);
+
+	if (host && !host->suspended)
+		return 0;
+
+	if (host) {
+
+		ret = clk_enable(host->fclk);
+		if (ret)
+			goto clk_en_err;
+
+		ret = clk_enable(host->iclk);
+		if (ret) {
+			clk_disable(host->fclk);
+			clk_put(host->fclk);
+			goto clk_en_err;
+		}
+
+		if (clk_enable(host->dbclk) != 0)
+			dev_dbg(mmc_dev(host->mmc),
+					"Enabling debounce clk failed\n");
+
+		if (host->pdata->resume) {
+			ret = host->pdata->resume(&pdev->dev, host->slot_id);
+			if (ret)
+				dev_dbg(mmc_dev(host->mmc),
+					"Unmask interrupt failed\n");
+		}
+
+		/* Notify the core to resume the host */
+		ret = mmc_resume_host(host->mmc);
+		if (ret == 0)
+			host->suspended = 0;
+	}
+
+	return ret;
+
+clk_en_err:
+	dev_dbg(mmc_dev(host->mmc),
+		"Failed to enable MMC clocks during resume\n");
+	return ret;
+}
+
+#else
+#define omap_mmc_suspend	NULL
+#define omap_mmc_resume		NULL
+#endif
+
+static struct platform_driver omap_mmc_driver = {
+	.probe		= omap_mmc_probe,
+	.remove		= omap_mmc_remove,
+	.suspend	= omap_mmc_suspend,
+	.resume		= omap_mmc_resume,
+	.driver		= {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init omap_mmc_init(void)
+{
+	/* Register the MMC driver */
+	return platform_driver_register(&omap_mmc_driver);
+}
+
+static void __exit omap_mmc_cleanup(void)
+{
+	/* Unregister MMC driver */
+	platform_driver_unregister(&omap_mmc_driver);
+}
+
+module_init(omap_mmc_init);
+module_exit(omap_mmc_cleanup);
+
+MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 3c5483b75da..9702ad3774c 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -180,7 +180,15 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 	else
 		DALGN &= ~(1 << host->dma);
 	DDADR(host->dma) = host->sg_dma;
-	DCSR(host->dma) = DCSR_RUN;
+
+	/*
+	 * workaround for erratum #91:
+	 * only start DMA now if we are doing a read,
+	 * otherwise we wait until CMD/RESP has finished
+	 * before starting DMA.
+	 */
+	if (!cpu_is_pxa27x() || data->flags & MMC_DATA_READ)
+		DCSR(host->dma) = DCSR_RUN;
 }
 
 static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat)
@@ -251,23 +259,28 @@ static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat)
 	if (stat & STAT_TIME_OUT_RESPONSE) {
 		cmd->error = -ETIMEDOUT;
 	} else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
-#ifdef CONFIG_PXA27x
 		/*
 		 * workaround for erratum #42:
 		 * Intel PXA27x Family Processor Specification Update Rev 001
 		 * A bogus CRC error can appear if the msb of a 136 bit
 		 * response is a one.
 		 */
-		if (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000) {
+		if (cpu_is_pxa27x() &&
+		    (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000))
 			pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode);
-		} else
-#endif
-		cmd->error = -EILSEQ;
+		else
+			cmd->error = -EILSEQ;
 	}
 
 	pxamci_disable_irq(host, END_CMD_RES);
 	if (host->data && !cmd->error) {
 		pxamci_enable_irq(host, DATA_TRAN_DONE);
+		/*
+		 * workaround for erratum #91, if doing write
+		 * enable DMA late
+		 */
+		if (cpu_is_pxa27x() && host->data->flags & MMC_DATA_WRITE)
+			DCSR(host->dma) = DCSR_RUN;
 	} else {
 		pxamci_finish_request(host, host->mrq);
 	}
diff --git a/drivers/mmc/host/ricoh_mmc.c b/drivers/mmc/host/ricoh_mmc.c
index be9e7b32b34..f6279051332 100644
--- a/drivers/mmc/host/ricoh_mmc.c
+++ b/drivers/mmc/host/ricoh_mmc.c
@@ -196,7 +196,7 @@ static void __devexit ricoh_mmc_remove(struct pci_dev *pdev)
 	pci_set_drvdata(pdev, NULL);
 }
 
-static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state)
+static int ricoh_mmc_suspend_late(struct pci_dev *pdev, pm_message_t state)
 {
 	struct pci_dev *fw_dev = NULL;
 
@@ -210,7 +210,7 @@ static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state)
 	return 0;
 }
 
-static int ricoh_mmc_resume(struct pci_dev *pdev)
+static int ricoh_mmc_resume_early(struct pci_dev *pdev)
 {
 	struct pci_dev *fw_dev = NULL;
 
@@ -229,8 +229,8 @@ static struct pci_driver ricoh_mmc_driver = {
 	.id_table =	pci_ids,
 	.probe = 	ricoh_mmc_probe,
 	.remove =	__devexit_p(ricoh_mmc_remove),
-	.suspend =	ricoh_mmc_suspend,
-	.resume =	ricoh_mmc_resume,
+	.suspend_late =	ricoh_mmc_suspend_late,
+	.resume_early =	ricoh_mmc_resume_early,
 };
 
 /*****************************************************************************\
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index fcc98a4cce3..35a98eec741 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -20,7 +20,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 
-#include <asm/dma.h>
+#include <mach/dma.h>
 
 #include <mach/regs-sdi.h>
 #include <mach/regs-gpio.h>
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index 7df6bbf0e4d..6f6a0f6dafd 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -453,7 +453,7 @@ static struct platform_driver sa1100_mtd_driver = {
 	.resume		= sa1100_mtd_resume,
 	.shutdown	= sa1100_mtd_shutdown,
 	.driver		= {
-		.name	= "flash",
+		.name	= "sa1100-mtd",
 		.owner	= THIS_MODULE,
 	},
 };
@@ -474,4 +474,4 @@ module_exit(sa1100_mtd_exit);
 MODULE_AUTHOR("Nicolas Pitre");
 MODULE_DESCRIPTION("SA1100 CFI map driver");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:flash");
+MODULE_ALIAS("platform:sa1100-mtd");
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 65929db2944..1f6eb257871 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -676,7 +676,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 
 	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->numchips = %d\n",
 	        chip->numchips);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %ld\n",
+	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %lld\n",
 	        chip->chipsize);
 	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->pagemask = %8x\n",
 	        chip->pagemask);
@@ -703,7 +703,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.layout = %p\n",
 	        chip->ecc.layout);
 	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %d\n", mtd->size);
+	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
 	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
 	        mtd->erasesize);
 	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->writesize = %d\n",
@@ -932,8 +932,8 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
 #endif
 		add_mtd_device(&priv->mtd);
 
-	printk(KERN_INFO "eLBC NAND device at 0x%zx, bank %d\n",
-	       res.start, priv->bank);
+	printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n",
+	       (unsigned long long)res.start, priv->bank);
 	return 0;
 
 err:
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index 9bd6c9ac844..a8b9376cf32 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -107,7 +107,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev,
 	if (pasemi_nand_mtd)
 		return -ENODEV;
 
-	pr_debug("pasemi_nand at %lx-%lx\n", res.start, res.end);
+	pr_debug("pasemi_nand at %llx-%llx\n", res.start, res.end);
 
 	/* Allocate memory for MTD device structure and private data */
 	pasemi_nand_mtd = kzalloc(sizeof(struct mtd_info) +
@@ -170,7 +170,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev,
 		goto out_lpc;
 	}
 
-	printk(KERN_INFO "PA Semi NAND flash at %08lx, control at I/O %x\n",
+	printk(KERN_INFO "PA Semi NAND flash at %08llx, control at I/O %x\n",
 	       res.start, lpcctl);
 
 	return 0;
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 96ecc1766fa..77a4f144615 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -629,7 +629,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 	}
 
 	if (c->gpio_irq) {
-		if ((r = omap_request_gpio(c->gpio_irq)) < 0) {
+		if ((r = gpio_request(c->gpio_irq, "OneNAND irq")) < 0) {
 			dev_err(&pdev->dev,  "Failed to request GPIO%d for "
 				"OneNAND\n", c->gpio_irq);
 			goto err_iounmap;
@@ -726,7 +726,7 @@ err_release_dma:
 		free_irq(gpio_to_irq(c->gpio_irq), c);
 err_release_gpio:
 	if (c->gpio_irq)
-		omap_free_gpio(c->gpio_irq);
+		gpio_free(c->gpio_irq);
 err_iounmap:
 	iounmap(c->onenand.base);
 err_release_mem_region:
@@ -761,7 +761,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 	if (c->gpio_irq) {
 		free_irq(gpio_to_irq(c->gpio_irq), c);
-		omap_free_gpio(c->gpio_irq);
+		gpio_free(c->gpio_irq);
 	}
 	iounmap(c->onenand.base);
 	release_mem_region(c->phys_base, ONENAND_IO_SIZE);
diff --git a/drivers/mtd/ubi/Kconfig.debug b/drivers/mtd/ubi/Kconfig.debug
index 1e2ee22edef..2246f154e2f 100644
--- a/drivers/mtd/ubi/Kconfig.debug
+++ b/drivers/mtd/ubi/Kconfig.debug
@@ -33,16 +33,6 @@ config MTD_UBI_DEBUG_DISABLE_BGT
 	  This option switches the background thread off by default. The thread
 	  may be also be enabled/disabled via UBI sysfs.
 
-config MTD_UBI_DEBUG_USERSPACE_IO
-	bool "Direct user-space write/erase support"
-	default n
-	depends on MTD_UBI_DEBUG
-	help
-	  By default, users cannot directly write and erase individual
-	  eraseblocks of dynamic volumes, and have to use update operation
-	  instead. This option enables this capability - it is very useful for
-	  debugging and testing.
-
 config MTD_UBI_DEBUG_EMULATE_BITFLIPS
 	bool "Emulate flash bit-flips"
 	depends on MTD_UBI_DEBUG
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 9082768cc6c..4048db83aef 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -263,8 +263,12 @@ static ssize_t dev_attribute_show(struct device *dev,
 	return ret;
 }
 
-/* Fake "release" method for UBI devices */
-static void dev_release(struct device *dev) { }
+static void dev_release(struct device *dev)
+{
+	struct ubi_device *ubi = container_of(dev, struct ubi_device, dev);
+
+	kfree(ubi);
+}
 
 /**
  * ubi_sysfs_init - initialize sysfs for an UBI device.
@@ -380,7 +384,7 @@ static void free_user_volumes(struct ubi_device *ubi)
  */
 static int uif_init(struct ubi_device *ubi)
 {
-	int i, err, do_free = 0;
+	int i, err;
 	dev_t dev;
 
 	sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num);
@@ -427,13 +431,10 @@ static int uif_init(struct ubi_device *ubi)
 
 out_volumes:
 	kill_volumes(ubi);
-	do_free = 0;
 out_sysfs:
 	ubi_sysfs_close(ubi);
 	cdev_del(&ubi->cdev);
 out_unreg:
-	if (do_free)
-		free_user_volumes(ubi);
 	unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1);
 	ubi_err("cannot initialize UBI %s, error %d", ubi->ubi_name, err);
 	return err;
@@ -947,6 +948,12 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
 	if (ubi->bgt_thread)
 		kthread_stop(ubi->bgt_thread);
 
+	/*
+	 * Get a reference to the device in order to prevent 'dev_release()'
+	 * from freeing @ubi object.
+	 */
+	get_device(&ubi->dev);
+
 	uif_close(ubi);
 	ubi_wl_close(ubi);
 	free_internal_volumes(ubi);
@@ -958,7 +965,7 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
 	vfree(ubi->dbg_peb_buf);
 #endif
 	ubi_msg("mtd%d is detached from ubi%d", ubi->mtd->index, ubi->ubi_num);
-	kfree(ubi);
+	put_device(&ubi->dev);
 	return 0;
 }
 
diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index 98cf31ed081..e63c8fc3df3 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -40,9 +40,9 @@
 #include <linux/ioctl.h>
 #include <linux/capability.h>
 #include <linux/uaccess.h>
-#include <linux/smp_lock.h>
+#include <linux/compat.h>
+#include <linux/math64.h>
 #include <mtd/ubi-user.h>
-#include <asm/div64.h>
 #include "ubi.h"
 
 /**
@@ -195,7 +195,6 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count,
 	int err, lnum, off, len,  tbuf_size;
 	size_t count_save = count;
 	void *tbuf;
-	uint64_t tmp;
 
 	dbg_gen("read %zd bytes from offset %lld of volume %d",
 		count, *offp, vol->vol_id);
@@ -225,10 +224,7 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count,
 		return -ENOMEM;
 
 	len = count > tbuf_size ? tbuf_size : count;
-
-	tmp = *offp;
-	off = do_div(tmp, vol->usable_leb_size);
-	lnum = tmp;
+	lnum = div_u64_rem(*offp, vol->usable_leb_size, &off);
 
 	do {
 		cond_resched();
@@ -263,12 +259,9 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count,
 	return err ? err : count_save - count;
 }
 
-#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO
-
 /*
  * This function allows to directly write to dynamic UBI volumes, without
- * issuing the volume update operation. Available only as a debugging feature.
- * Very useful for testing UBI.
+ * issuing the volume update operation.
  */
 static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 				     size_t count, loff_t *offp)
@@ -279,7 +272,9 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 	int lnum, off, len, tbuf_size, err = 0;
 	size_t count_save = count;
 	char *tbuf;
-	uint64_t tmp;
+
+	if (!vol->direct_writes)
+		return -EPERM;
 
 	dbg_gen("requested: write %zd bytes to offset %lld of volume %u",
 		count, *offp, vol->vol_id);
@@ -287,10 +282,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 	if (vol->vol_type == UBI_STATIC_VOLUME)
 		return -EROFS;
 
-	tmp = *offp;
-	off = do_div(tmp, vol->usable_leb_size);
-	lnum = tmp;
-
+	lnum = div_u64_rem(*offp, vol->usable_leb_size, &off);
 	if (off & (ubi->min_io_size - 1)) {
 		dbg_err("unaligned position");
 		return -EINVAL;
@@ -347,10 +339,6 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 	return err ? err : count_save - count;
 }
 
-#else
-#define vol_cdev_direct_write(file, buf, count, offp) (-EPERM)
-#endif /* CONFIG_MTD_UBI_DEBUG_USERSPACE_IO */
-
 static ssize_t vol_cdev_write(struct file *file, const char __user *buf,
 			      size_t count, loff_t *offp)
 {
@@ -402,8 +390,8 @@ static ssize_t vol_cdev_write(struct file *file, const char __user *buf,
 	return count;
 }
 
-static int vol_cdev_ioctl(struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg)
+static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
+			   unsigned long arg)
 {
 	int err = 0;
 	struct ubi_volume_desc *desc = file->private_data;
@@ -487,7 +475,6 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file,
 		break;
 	}
 
-#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO
 	/* Logical eraseblock erasure command */
 	case UBI_IOCEBER:
 	{
@@ -518,13 +505,77 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file,
 		err = ubi_wl_flush(ubi);
 		break;
 	}
-#endif
+
+	/* Logical eraseblock map command */
+	case UBI_IOCEBMAP:
+	{
+		struct ubi_map_req req;
+
+		err = copy_from_user(&req, argp, sizeof(struct ubi_map_req));
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+		err = ubi_leb_map(desc, req.lnum, req.dtype);
+		break;
+	}
+
+	/* Logical eraseblock un-map command */
+	case UBI_IOCEBUNMAP:
+	{
+		int32_t lnum;
+
+		err = get_user(lnum, (__user int32_t *)argp);
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+		err = ubi_leb_unmap(desc, lnum);
+		break;
+	}
+
+	/* Check if logical eraseblock is mapped command */
+	case UBI_IOCEBISMAP:
+	{
+		int32_t lnum;
+
+		err = get_user(lnum, (__user int32_t *)argp);
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+		err = ubi_is_mapped(desc, lnum);
+		break;
+	}
+
+	/* Set volume property command*/
+	case UBI_IOCSETPROP:
+	{
+		struct ubi_set_prop_req req;
+
+		err = copy_from_user(&req, argp,
+				sizeof(struct ubi_set_prop_req));
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+		switch (req.property) {
+		case UBI_PROP_DIRECT_WRITE:
+			mutex_lock(&ubi->volumes_mutex);
+			desc->vol->direct_writes = !!req.value;
+			mutex_unlock(&ubi->volumes_mutex);
+			break;
+		default:
+			err = -EINVAL;
+			break;
+		}
+		break;
+	}
 
 	default:
 		err = -ENOTTY;
 		break;
 	}
-
 	return err;
 }
 
@@ -762,8 +813,8 @@ out_free:
 	return err;
 }
 
-static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg)
+static long ubi_cdev_ioctl(struct file *file, unsigned int cmd,
+			   unsigned long arg)
 {
 	int err = 0;
 	struct ubi_device *ubi;
@@ -773,7 +824,7 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
 	if (!capable(CAP_SYS_RESOURCE))
 		return -EPERM;
 
-	ubi = ubi_get_by_major(imajor(inode));
+	ubi = ubi_get_by_major(imajor(file->f_mapping->host));
 	if (!ubi)
 		return -ENODEV;
 
@@ -843,7 +894,6 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
 	case UBI_IOCRSVOL:
 	{
 		int pebs;
-		uint64_t tmp;
 		struct ubi_rsvol_req req;
 
 		dbg_gen("re-size volume");
@@ -863,9 +913,8 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
 			break;
 		}
 
-		tmp = req.bytes;
-		pebs = !!do_div(tmp, desc->vol->usable_leb_size);
-		pebs += tmp;
+		pebs = div_u64(req.bytes + desc->vol->usable_leb_size - 1,
+			       desc->vol->usable_leb_size);
 
 		mutex_lock(&ubi->volumes_mutex);
 		err = ubi_resize_volume(desc, pebs);
@@ -909,8 +958,8 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
 	return err;
 }
 
-static int ctrl_cdev_ioctl(struct inode *inode, struct file *file,
-			   unsigned int cmd, unsigned long arg)
+static long ctrl_cdev_ioctl(struct file *file, unsigned int cmd,
+			    unsigned long arg)
 {
 	int err = 0;
 	void __user *argp = (void __user *)arg;
@@ -986,26 +1035,59 @@ static int ctrl_cdev_ioctl(struct inode *inode, struct file *file,
 	return err;
 }
 
-/* UBI control character device operations */
-struct file_operations ubi_ctrl_cdev_operations = {
-	.ioctl = ctrl_cdev_ioctl,
-	.owner = THIS_MODULE,
+#ifdef CONFIG_COMPAT
+static long vol_cdev_compat_ioctl(struct file *file, unsigned int cmd,
+				  unsigned long arg)
+{
+	unsigned long translated_arg = (unsigned long)compat_ptr(arg);
+
+	return vol_cdev_ioctl(file, cmd, translated_arg);
+}
+
+static long ubi_cdev_compat_ioctl(struct file *file, unsigned int cmd,
+				  unsigned long arg)
+{
+	unsigned long translated_arg = (unsigned long)compat_ptr(arg);
+
+	return ubi_cdev_ioctl(file, cmd, translated_arg);
+}
+
+static long ctrl_cdev_compat_ioctl(struct file *file, unsigned int cmd,
+				   unsigned long arg)
+{
+	unsigned long translated_arg = (unsigned long)compat_ptr(arg);
+
+	return ctrl_cdev_ioctl(file, cmd, translated_arg);
+}
+#else
+#define vol_cdev_compat_ioctl  NULL
+#define ubi_cdev_compat_ioctl  NULL
+#define ctrl_cdev_compat_ioctl NULL
+#endif
+
+/* UBI volume character device operations */
+const struct file_operations ubi_vol_cdev_operations = {
+	.owner          = THIS_MODULE,
+	.open           = vol_cdev_open,
+	.release        = vol_cdev_release,
+	.llseek         = vol_cdev_llseek,
+	.read           = vol_cdev_read,
+	.write          = vol_cdev_write,
+	.unlocked_ioctl = vol_cdev_ioctl,
+	.compat_ioctl   = vol_cdev_compat_ioctl,
 };
 
 /* UBI character device operations */
-struct file_operations ubi_cdev_operations = {
-	.owner = THIS_MODULE,
-	.ioctl = ubi_cdev_ioctl,
-	.llseek = no_llseek,
+const struct file_operations ubi_cdev_operations = {
+	.owner          = THIS_MODULE,
+	.llseek         = no_llseek,
+	.unlocked_ioctl = ubi_cdev_ioctl,
+	.compat_ioctl   = ubi_cdev_compat_ioctl,
 };
 
-/* UBI volume character device operations */
-struct file_operations ubi_vol_cdev_operations = {
-	.owner   = THIS_MODULE,
-	.open    = vol_cdev_open,
-	.release = vol_cdev_release,
-	.llseek  = vol_cdev_llseek,
-	.read    = vol_cdev_read,
-	.write   = vol_cdev_write,
-	.ioctl   = vol_cdev_ioctl,
+/* UBI control character device operations */
+const struct file_operations ubi_ctrl_cdev_operations = {
+	.owner          = THIS_MODULE,
+	.unlocked_ioctl = ctrl_cdev_ioctl,
+	.compat_ioctl   = ctrl_cdev_compat_ioctl,
 };
diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c
index 6dd4f5e77f8..49cd55ade9c 100644
--- a/drivers/mtd/ubi/gluebi.c
+++ b/drivers/mtd/ubi/gluebi.c
@@ -28,7 +28,7 @@
  * eraseblock size is equivalent to the logical eraseblock size of the volume.
  */
 
-#include <asm/div64.h>
+#include <linux/math64.h>
 #include "ubi.h"
 
 /**
@@ -109,7 +109,6 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len,
 	int err = 0, lnum, offs, total_read;
 	struct ubi_volume *vol;
 	struct ubi_device *ubi;
-	uint64_t tmp = from;
 
 	dbg_gen("read %zd bytes from offset %lld", len, from);
 
@@ -119,9 +118,7 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len,
 	vol = container_of(mtd, struct ubi_volume, gluebi_mtd);
 	ubi = vol->ubi;
 
-	offs = do_div(tmp, mtd->erasesize);
-	lnum = tmp;
-
+	lnum = div_u64_rem(from, mtd->erasesize, &offs);
 	total_read = len;
 	while (total_read) {
 		size_t to_read = mtd->erasesize - offs;
@@ -160,7 +157,6 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len,
 	int err = 0, lnum, offs, total_written;
 	struct ubi_volume *vol;
 	struct ubi_device *ubi;
-	uint64_t tmp = to;
 
 	dbg_gen("write %zd bytes to offset %lld", len, to);
 
@@ -173,8 +169,7 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len,
 	if (ubi->ro_mode)
 		return -EROFS;
 
-	offs = do_div(tmp, mtd->erasesize);
-	lnum = tmp;
+	lnum = div_u64_rem(to, mtd->erasesize, &offs);
 
 	if (len % mtd->writesize || offs % mtd->writesize)
 		return -EINVAL;
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index ecde202a5a1..c3d653ba5ca 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -42,7 +42,7 @@
 
 #include <linux/err.h>
 #include <linux/crc32.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
 #include "ubi.h"
 
 #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
@@ -904,10 +904,8 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi)
 	dbg_msg("scanning is finished");
 
 	/* Calculate mean erase counter */
-	if (si->ec_count) {
-		do_div(si->ec_sum, si->ec_count);
-		si->mean_ec = si->ec_sum;
-	}
+	if (si->ec_count)
+		si->mean_ec = div_u64(si->ec_sum, si->ec_count);
 
 	if (si->is_empty)
 		ubi_msg("empty MTD device detected");
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 4a8ec485c91..c055511bb1b 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -206,6 +206,7 @@ struct ubi_volume_desc;
  * @upd_marker: %1 if the update marker is set for this volume
  * @updating: %1 if the volume is being updated
  * @changing_leb: %1 if the atomic LEB change ioctl command is in progress
+ * @direct_writes: %1 if direct writes are enabled for this volume
  *
  * @gluebi_desc: gluebi UBI volume descriptor
  * @gluebi_refcount: reference count of the gluebi MTD device
@@ -253,6 +254,7 @@ struct ubi_volume {
 	unsigned int upd_marker:1;
 	unsigned int updating:1;
 	unsigned int changing_leb:1;
+	unsigned int direct_writes:1;
 
 #ifdef CONFIG_MTD_UBI_GLUEBI
 	/*
@@ -304,7 +306,8 @@ struct ubi_wl_entry;
  * @vtbl_size: size of the volume table in bytes
  * @vtbl: in-RAM volume table copy
  * @volumes_mutex: protects on-flash volume table and serializes volume
- *                 changes, like creation, deletion, update, re-size and re-name
+ *                 changes, like creation, deletion, update, re-size,
+ *                 re-name and set property
  *
  * @max_ec: current highest erase counter value
  * @mean_ec: current mean erase counter value
@@ -449,9 +452,9 @@ struct ubi_device {
 };
 
 extern struct kmem_cache *ubi_wl_entry_slab;
-extern struct file_operations ubi_ctrl_cdev_operations;
-extern struct file_operations ubi_cdev_operations;
-extern struct file_operations ubi_vol_cdev_operations;
+extern const struct file_operations ubi_ctrl_cdev_operations;
+extern const struct file_operations ubi_cdev_operations;
+extern const struct file_operations ubi_vol_cdev_operations;
 extern struct class *ubi_class;
 extern struct mutex ubi_devices_mutex;
 
diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c
index 8b89cc18ff0..6b4d1ae891a 100644
--- a/drivers/mtd/ubi/upd.c
+++ b/drivers/mtd/ubi/upd.c
@@ -40,7 +40,7 @@
 
 #include <linux/err.h>
 #include <linux/uaccess.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
 #include "ubi.h"
 
 /**
@@ -89,7 +89,6 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol,
 			       long long bytes)
 {
 	int err;
-	uint64_t tmp;
 	struct ubi_vtbl_record vtbl_rec;
 
 	dbg_gen("clear update marker for volume %d", vol->vol_id);
@@ -101,9 +100,9 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol,
 
 	if (vol->vol_type == UBI_STATIC_VOLUME) {
 		vol->corrupted = 0;
-		vol->used_bytes = tmp = bytes;
-		vol->last_eb_bytes = do_div(tmp, vol->usable_leb_size);
-		vol->used_ebs = tmp;
+		vol->used_bytes = bytes;
+		vol->used_ebs = div_u64_rem(bytes, vol->usable_leb_size,
+					    &vol->last_eb_bytes);
 		if (vol->last_eb_bytes)
 			vol->used_ebs += 1;
 		else
@@ -131,7 +130,6 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
 		     long long bytes)
 {
 	int i, err;
-	uint64_t tmp;
 
 	dbg_gen("start update of volume %d, %llu bytes", vol->vol_id, bytes);
 	ubi_assert(!vol->updating && !vol->changing_leb);
@@ -161,9 +159,8 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
 	if (!vol->upd_buf)
 		return -ENOMEM;
 
-	tmp = bytes;
-	vol->upd_ebs = !!do_div(tmp, vol->usable_leb_size);
-	vol->upd_ebs += tmp;
+	vol->upd_ebs = div_u64(bytes + vol->usable_leb_size - 1,
+			       vol->usable_leb_size);
 	vol->upd_bytes = bytes;
 	vol->upd_received = 0;
 	return 0;
@@ -282,7 +279,6 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
 			 const void __user *buf, int count)
 {
-	uint64_t tmp;
 	int lnum, offs, err = 0, len, to_write = count;
 
 	dbg_gen("write %d of %lld bytes, %lld already passed",
@@ -291,10 +287,7 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
 	if (ubi->ro_mode)
 		return -EROFS;
 
-	tmp = vol->upd_received;
-	offs = do_div(tmp, vol->usable_leb_size);
-	lnum = tmp;
-
+	lnum = div_u64_rem(vol->upd_received,  vol->usable_leb_size, &offs);
 	if (vol->upd_received + count > vol->upd_bytes)
 		to_write = count = vol->upd_bytes - vol->upd_received;
 
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index 22e1d7398fc..df5483562b7 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -24,7 +24,7 @@
  */
 
 #include <linux/err.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
 #include "ubi.h"
 
 #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
@@ -205,7 +205,6 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	int i, err, vol_id = req->vol_id, do_free = 1;
 	struct ubi_volume *vol;
 	struct ubi_vtbl_record vtbl_rec;
-	uint64_t bytes;
 	dev_t dev;
 
 	if (ubi->ro_mode)
@@ -255,10 +254,8 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 
 	/* Calculate how many eraseblocks are requested */
 	vol->usable_leb_size = ubi->leb_size - ubi->leb_size % req->alignment;
-	bytes = req->bytes;
-	if (do_div(bytes, vol->usable_leb_size))
-		vol->reserved_pebs = 1;
-	vol->reserved_pebs += bytes;
+	vol->reserved_pebs += div_u64(req->bytes + vol->usable_leb_size - 1,
+				      vol->usable_leb_size);
 
 	/* Reserve physical eraseblocks */
 	if (vol->reserved_pebs > ubi->avail_pebs) {
@@ -301,10 +298,10 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 		vol->used_bytes =
 			(long long)vol->used_ebs * vol->usable_leb_size;
 	} else {
-		bytes = vol->used_bytes;
-		vol->last_eb_bytes = do_div(bytes, vol->usable_leb_size);
-		vol->used_ebs = bytes;
-		if (vol->last_eb_bytes)
+		vol->used_ebs = div_u64_rem(vol->used_bytes,
+					    vol->usable_leb_size,
+					    &vol->last_eb_bytes);
+		if (vol->last_eb_bytes != 0)
 			vol->used_ebs += 1;
 		else
 			vol->last_eb_bytes = vol->usable_leb_size;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9fe8cb7d43a..6bdfd47d679 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1829,7 +1829,7 @@ config 68360_ENET
 
 config FEC
 	bool "FEC ethernet controller (of ColdFire CPUs)"
-	depends on M523x || M527x || M5272 || M528x || M520x
+	depends on M523x || M527x || M5272 || M528x || M520x || M532x
 	help
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
 	  controller on some Motorola ColdFire processors.
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index 0c628a9e533..c2d012fcc29 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -208,9 +208,9 @@ am79c961_init_for_open(struct net_device *dev)
 	/*
 	 * Stop the chip.
 	 */
-	spin_lock_irqsave(priv->chip_lock, flags);
+	spin_lock_irqsave(&priv->chip_lock, flags);
 	write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP);
-	spin_unlock_irqrestore(priv->chip_lock, flags);
+	spin_unlock_irqrestore(&priv->chip_lock, flags);
 
 	write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */
 	write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */
@@ -332,10 +332,10 @@ am79c961_close(struct net_device *dev)
 	netif_stop_queue(dev);
 	netif_carrier_off(dev);
 
-	spin_lock_irqsave(priv->chip_lock, flags);
+	spin_lock_irqsave(&priv->chip_lock, flags);
 	write_rreg (dev->base_addr, CSR0, CSR0_STOP);
 	write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
-	spin_unlock_irqrestore(priv->chip_lock, flags);
+	spin_unlock_irqrestore(&priv->chip_lock, flags);
 
 	free_irq (dev->irq, dev);
 
@@ -391,7 +391,7 @@ static void am79c961_setmulticastlist (struct net_device *dev)
 			am79c961_mc_hash(dmi, multi_hash);
 	}
 
-	spin_lock_irqsave(priv->chip_lock, flags);
+	spin_lock_irqsave(&priv->chip_lock, flags);
 
 	stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP;
 
@@ -405,9 +405,9 @@ static void am79c961_setmulticastlist (struct net_device *dev)
 		 * Spin waiting for chip to report suspend mode
 		 */
 		while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) {
-			spin_unlock_irqrestore(priv->chip_lock, flags);
+			spin_unlock_irqrestore(&priv->chip_lock, flags);
 			nop();
-			spin_lock_irqsave(priv->chip_lock, flags);
+			spin_lock_irqsave(&priv->chip_lock, flags);
 		}
 	}
 
@@ -429,7 +429,7 @@ static void am79c961_setmulticastlist (struct net_device *dev)
 		write_rreg(dev->base_addr, CTRL1, 0);
 	}
 
-	spin_unlock_irqrestore(priv->chip_lock, flags);
+	spin_unlock_irqrestore(&priv->chip_lock, flags);
 }
 
 static void am79c961_timeout(struct net_device *dev)
@@ -467,10 +467,10 @@ am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev)
 	am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP);
 	priv->txhead = head;
 
-	spin_lock_irqsave(priv->chip_lock, flags);
+	spin_lock_irqsave(&priv->chip_lock, flags);
 	write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA);
 	dev->trans_start = jiffies;
-	spin_unlock_irqrestore(priv->chip_lock, flags);
+	spin_unlock_irqrestore(&priv->chip_lock, flags);
 
 	/*
 	 * If the next packet is owned by the ethernet device,
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index d15d8b79d8e..54b52e5b182 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -646,7 +646,7 @@ static const struct net_device_ops etherh_netdev_ops = {
 	.ndo_get_stats		= ei_get_stats,
 	.ndo_set_multicast_list = ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= eth_set_mac_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= ei_poll,
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 6fcccef4cf3..15a5cf0f676 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -1,6 +1,6 @@
 /* bnx2x.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2008 Broadcom Corporation
+ * Copyright (c) 2007-2009 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -271,14 +271,7 @@ struct bnx2x_fastpath {
 
 #define bnx2x_fp(bp, nr, var)		(bp->fp[nr].var)
 
-#define BNX2X_HAS_TX_WORK(fp) \
-			((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) || \
-			 (fp->tx_pkt_prod != fp->tx_pkt_cons))
-
-#define BNX2X_HAS_RX_WORK(fp) \
-			(fp->rx_comp_cons != rx_cons_sb)
-
-#define BNX2X_HAS_WORK(fp)	(BNX2X_HAS_RX_WORK(fp) || BNX2X_HAS_TX_WORK(fp))
+#define BNX2X_HAS_WORK(fp)	(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))
 
 
 /* MC hsi */
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index fefa6ab1306..aea26b4dc45 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -1,4 +1,4 @@
-/* Copyright 2008 Broadcom Corporation
+/* Copyright 2008-2009 Broadcom Corporation
  *
  * Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
@@ -317,6 +317,9 @@ static u8 bnx2x_emac_enable(struct link_params *params,
 		val &= ~0x810;
 	EMAC_WR(bp, EMAC_REG_EMAC_MODE, val);
 
+	/* enable emac */
+	REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 1);
+
 	/* enable emac for jumbo packets */
 	EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE,
 		(EMAC_RX_MTU_SIZE_JUMBO_ENA |
@@ -1609,7 +1612,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 				      u32 gp_status)
 {
 	struct bnx2x *bp = params->bp;
-
+	u16 new_line_speed;
 	u8 rc = 0;
 	vars->link_status = 0;
 
@@ -1629,7 +1632,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 
 		switch (gp_status & GP_STATUS_SPEED_MASK) {
 		case GP_STATUS_10M:
-			vars->line_speed = SPEED_10;
+			new_line_speed = SPEED_10;
 			if (vars->duplex == DUPLEX_FULL)
 				vars->link_status |= LINK_10TFD;
 			else
@@ -1637,7 +1640,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 			break;
 
 		case GP_STATUS_100M:
-			vars->line_speed = SPEED_100;
+			new_line_speed = SPEED_100;
 			if (vars->duplex == DUPLEX_FULL)
 				vars->link_status |= LINK_100TXFD;
 			else
@@ -1646,7 +1649,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 
 		case GP_STATUS_1G:
 		case GP_STATUS_1G_KX:
-			vars->line_speed = SPEED_1000;
+			new_line_speed = SPEED_1000;
 			if (vars->duplex == DUPLEX_FULL)
 				vars->link_status |= LINK_1000TFD;
 			else
@@ -1654,7 +1657,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 			break;
 
 		case GP_STATUS_2_5G:
-			vars->line_speed = SPEED_2500;
+			new_line_speed = SPEED_2500;
 			if (vars->duplex == DUPLEX_FULL)
 				vars->link_status |= LINK_2500TFD;
 			else
@@ -1671,32 +1674,32 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 		case GP_STATUS_10G_KX4:
 		case GP_STATUS_10G_HIG:
 		case GP_STATUS_10G_CX4:
-			vars->line_speed = SPEED_10000;
+			new_line_speed = SPEED_10000;
 			vars->link_status |= LINK_10GTFD;
 			break;
 
 		case GP_STATUS_12G_HIG:
-			vars->line_speed = SPEED_12000;
+			new_line_speed = SPEED_12000;
 			vars->link_status |= LINK_12GTFD;
 			break;
 
 		case GP_STATUS_12_5G:
-			vars->line_speed = SPEED_12500;
+			new_line_speed = SPEED_12500;
 			vars->link_status |= LINK_12_5GTFD;
 			break;
 
 		case GP_STATUS_13G:
-			vars->line_speed = SPEED_13000;
+			new_line_speed = SPEED_13000;
 			vars->link_status |= LINK_13GTFD;
 			break;
 
 		case GP_STATUS_15G:
-			vars->line_speed = SPEED_15000;
+			new_line_speed = SPEED_15000;
 			vars->link_status |= LINK_15GTFD;
 			break;
 
 		case GP_STATUS_16G:
-			vars->line_speed = SPEED_16000;
+			new_line_speed = SPEED_16000;
 			vars->link_status |= LINK_16GTFD;
 			break;
 
@@ -1708,6 +1711,15 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 			break;
 		}
 
+		/* Upon link speed change set the NIG into drain mode.
+		Comes to deals with possible FIFO glitch due to clk change
+		when speed is decreased without link down indicator */
+		if (new_line_speed != vars->line_speed) {
+			REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE
+				    + params->port*4, 0);
+			msleep(1);
+		}
+		vars->line_speed = new_line_speed;
 		vars->link_status |= LINK_STATUS_SERDES_LINK;
 
 		if ((params->req_line_speed == SPEED_AUTO_NEG) &&
@@ -3571,7 +3583,7 @@ static void bnx2x_set_xgxs_loopback(struct link_params *params,
 			       (MDIO_REG_BANK_CL73_IEEEB0 +
 				(MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)),
 			       0x6041);
-
+		msleep(200);
 		/* set aer mmd back */
 		bnx2x_set_aer_mmd(params, vars);
 
@@ -3870,9 +3882,15 @@ static u8 bnx2x_link_initialize(struct link_params *params,
 	}
 
 	if (vars->phy_flags & PHY_XGXS_FLAG) {
-		if (params->req_line_speed &&
+		if ((params->req_line_speed &&
 		    ((params->req_line_speed == SPEED_100) ||
-		     (params->req_line_speed == SPEED_10))) {
+		     (params->req_line_speed == SPEED_10))) ||
+		    (!params->req_line_speed &&
+		     (params->speed_cap_mask >=
+		       PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) &&
+		     (params->speed_cap_mask <
+		       PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
+		     ))  {
 			vars->phy_flags |= PHY_SGMII_FLAG;
 		} else {
 			vars->phy_flags &= ~PHY_SGMII_FLAG;
@@ -4194,6 +4212,11 @@ static u8 bnx2x_update_link_down(struct link_params *params,
 	/* activate nig drain */
 	REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
 
+	/* disable emac */
+	REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
+
+	msleep(10);
+
 	/* reset BigMac */
 	bnx2x_bmac_rx_disable(bp, params->port);
 	REG_WR(bp, GRCBASE_MISC +
@@ -4238,6 +4261,7 @@ static u8 bnx2x_update_link_up(struct link_params *params,
 
 	/* update shared memory */
 	bnx2x_update_mng(params, vars->link_status);
+	msleep(20);
 	return rc;
 }
 /* This function should called upon link interrupt */
@@ -4276,6 +4300,9 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 	  REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
 	  REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
 
+	/* disable emac */
+	REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
+
 	ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
 	/* Check external link change only for non-direct */
@@ -4377,10 +4404,11 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base)
 			      ext_phy_addr[port],
 			      MDIO_PMA_DEVAD,
 			      MDIO_PMA_REG_ROM_VER1, &fw_ver1);
-		if (fw_ver1 == 0) {
+		if (fw_ver1 == 0 || fw_ver1 == 0x4321) {
 			DP(NETIF_MSG_LINK,
-				 "bnx2x_8073_common_init_phy port %x "
-				 "fw Download failed\n", port);
+				 "bnx2x_8073_common_init_phy port %x:"
+				 "Download failed. fw version = 0x%x\n",
+				 port, fw_ver1);
 			return -EINVAL;
 		}
 
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 7c533797c06..d3e7775a9cc 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -1,6 +1,6 @@
 /* bnx2x_main.c: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2008 Broadcom Corporation
+ * Copyright (c) 2007-2009 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -57,8 +57,8 @@
 #include "bnx2x.h"
 #include "bnx2x_init.h"
 
-#define DRV_MODULE_VERSION	"1.45.23"
-#define DRV_MODULE_RELDATE	"2008/11/03"
+#define DRV_MODULE_VERSION	"1.45.26"
+#define DRV_MODULE_RELDATE	"2009/01/26"
 #define BNX2X_BC_VER		0x040200
 
 /* Time in jiffies before concluding the transmitter is hung */
@@ -69,7 +69,7 @@ static char version[] __devinitdata =
 	DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
 
 MODULE_AUTHOR("Eliezer Tamir");
-MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
+MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710/57711/57711E Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
 
@@ -733,6 +733,24 @@ static u16 bnx2x_ack_int(struct bnx2x *bp)
  * fast path service functions
  */
 
+static inline int bnx2x_has_tx_work(struct bnx2x_fastpath *fp)
+{
+	u16 tx_cons_sb;
+
+	/* Tell compiler that status block fields can change */
+	barrier();
+	tx_cons_sb = le16_to_cpu(*fp->tx_cons_sb);
+	return (fp->tx_pkt_cons != tx_cons_sb);
+}
+
+static inline int bnx2x_has_tx_work_unload(struct bnx2x_fastpath *fp)
+{
+	/* Tell compiler that consumer and producer can change */
+	barrier();
+	return (fp->tx_pkt_prod != fp->tx_pkt_cons);
+
+}
+
 /* free skb in the packet ring at pos idx
  * return idx of last bd freed
  */
@@ -5137,12 +5155,21 @@ static void enable_blocks_attention(struct bnx2x *bp)
 }
 
 
+static void bnx2x_reset_common(struct bnx2x *bp)
+{
+	/* reset_common */
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
+	       0xd3ffff7f);
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403);
+}
+
 static int bnx2x_init_common(struct bnx2x *bp)
 {
 	u32 val, i;
 
 	DP(BNX2X_MSG_MCP, "starting common init  func %d\n", BP_FUNC(bp));
 
+	bnx2x_reset_common(bp);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc);
 
@@ -6123,8 +6150,8 @@ static void bnx2x_netif_start(struct bnx2x *bp)
 static void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw)
 {
 	bnx2x_int_disable_sync(bp, disable_hw);
+	bnx2x_napi_disable(bp);
 	if (netif_running(bp->dev)) {
-		bnx2x_napi_disable(bp);
 		netif_tx_disable(bp->dev);
 		bp->dev->trans_start = jiffies;	/* prevent tx timeout */
 	}
@@ -6144,7 +6171,7 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp, int set)
 	 * multicast 64-127:port0 128-191:port1
 	 */
 	config->hdr.length_6b = 2;
-	config->hdr.offset = port ? 31 : 0;
+	config->hdr.offset = port ? 32 : 0;
 	config->hdr.client_id = BP_CL_ID(bp);
 	config->hdr.reserved1 = 0;
 
@@ -6308,7 +6335,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev);
 static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 {
 	u32 load_code;
-	int i, rc;
+	int i, rc = 0;
 #ifdef BNX2X_STOP_ON_ERROR
 	if (unlikely(bp->panic))
 		return -EPERM;
@@ -6316,48 +6343,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 
 	bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
 
-	/* Send LOAD_REQUEST command to MCP
-	   Returns the type of LOAD command:
-	   if it is the first port to be initialized
-	   common blocks should be initialized, otherwise - not
-	*/
-	if (!BP_NOMCP(bp)) {
-		load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
-		if (!load_code) {
-			BNX2X_ERR("MCP response failure, aborting\n");
-			return -EBUSY;
-		}
-		if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED)
-			return -EBUSY; /* other port in diagnostic mode */
-
-	} else {
-		int port = BP_PORT(bp);
-
-		DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n",
-		   load_count[0], load_count[1], load_count[2]);
-		load_count[0]++;
-		load_count[1 + port]++;
-		DP(NETIF_MSG_IFUP, "NO MCP new load counts       %d, %d, %d\n",
-		   load_count[0], load_count[1], load_count[2]);
-		if (load_count[0] == 1)
-			load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
-		else if (load_count[1 + port] == 1)
-			load_code = FW_MSG_CODE_DRV_LOAD_PORT;
-		else
-			load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
-	}
-
-	if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
-	    (load_code == FW_MSG_CODE_DRV_LOAD_PORT))
-		bp->port.pmf = 1;
-	else
-		bp->port.pmf = 0;
-	DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
-
-	/* if we can't use MSI-X we only need one fp,
-	 * so try to enable MSI-X with the requested number of fp's
-	 * and fallback to inta with one fp
-	 */
 	if (use_inta) {
 		bp->num_queues = 1;
 
@@ -6372,7 +6357,15 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		else
 			bp->num_queues = 1;
 
-		if (bnx2x_enable_msix(bp)) {
+		DP(NETIF_MSG_IFUP,
+		   "set number of queues to %d\n", bp->num_queues);
+
+		/* if we can't use MSI-X we only need one fp,
+		 * so try to enable MSI-X with the requested number of fp's
+		 * and fallback to MSI or legacy INTx with one fp
+		 */
+		rc = bnx2x_enable_msix(bp);
+		if (rc) {
 			/* failed to enable MSI-X */
 			bp->num_queues = 1;
 			if (use_multi)
@@ -6380,8 +6373,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 					  " to enable MSI-X\n");
 		}
 	}
-	DP(NETIF_MSG_IFUP,
-	   "set number of queues to %d\n", bp->num_queues);
 
 	if (bnx2x_alloc_mem(bp))
 		return -ENOMEM;
@@ -6390,30 +6381,85 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		bnx2x_fp(bp, i, disable_tpa) =
 					((bp->flags & TPA_ENABLE_FLAG) == 0);
 
+	for_each_queue(bp, i)
+		netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
+			       bnx2x_poll, 128);
+
+#ifdef BNX2X_STOP_ON_ERROR
+	for_each_queue(bp, i) {
+		struct bnx2x_fastpath *fp = &bp->fp[i];
+
+		fp->poll_no_work = 0;
+		fp->poll_calls = 0;
+		fp->poll_max_calls = 0;
+		fp->poll_complete = 0;
+		fp->poll_exit = 0;
+	}
+#endif
+	bnx2x_napi_enable(bp);
+
 	if (bp->flags & USING_MSIX_FLAG) {
 		rc = bnx2x_req_msix_irqs(bp);
 		if (rc) {
 			pci_disable_msix(bp->pdev);
-			goto load_error;
+			goto load_error1;
 		}
+		printk(KERN_INFO PFX "%s: using MSI-X\n", bp->dev->name);
 	} else {
 		bnx2x_ack_int(bp);
 		rc = bnx2x_req_irq(bp);
 		if (rc) {
-			BNX2X_ERR("IRQ request failed, aborting\n");
-			goto load_error;
+			BNX2X_ERR("IRQ request failed  rc %d, aborting\n", rc);
+			goto load_error1;
 		}
 	}
 
-	for_each_queue(bp, i)
-		netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
-			       bnx2x_poll, 128);
+	/* Send LOAD_REQUEST command to MCP
+	   Returns the type of LOAD command:
+	   if it is the first port to be initialized
+	   common blocks should be initialized, otherwise - not
+	*/
+	if (!BP_NOMCP(bp)) {
+		load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
+		if (!load_code) {
+			BNX2X_ERR("MCP response failure, aborting\n");
+			rc = -EBUSY;
+			goto load_error2;
+		}
+		if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) {
+			rc = -EBUSY; /* other port in diagnostic mode */
+			goto load_error2;
+		}
+
+	} else {
+		int port = BP_PORT(bp);
+
+		DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n",
+		   load_count[0], load_count[1], load_count[2]);
+		load_count[0]++;
+		load_count[1 + port]++;
+		DP(NETIF_MSG_IFUP, "NO MCP new load counts       %d, %d, %d\n",
+		   load_count[0], load_count[1], load_count[2]);
+		if (load_count[0] == 1)
+			load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
+		else if (load_count[1 + port] == 1)
+			load_code = FW_MSG_CODE_DRV_LOAD_PORT;
+		else
+			load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
+	}
+
+	if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
+	    (load_code == FW_MSG_CODE_DRV_LOAD_PORT))
+		bp->port.pmf = 1;
+	else
+		bp->port.pmf = 0;
+	DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
 
 	/* Initialize HW */
 	rc = bnx2x_init_hw(bp, load_code);
 	if (rc) {
 		BNX2X_ERR("HW init failed, aborting\n");
-		goto load_int_disable;
+		goto load_error2;
 	}
 
 	/* Setup NIC internals and enable interrupts */
@@ -6425,7 +6471,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		if (!load_code) {
 			BNX2X_ERR("MCP response failure, aborting\n");
 			rc = -EBUSY;
-			goto load_rings_free;
+			goto load_error3;
 		}
 	}
 
@@ -6434,7 +6480,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	rc = bnx2x_setup_leading(bp);
 	if (rc) {
 		BNX2X_ERR("Setup leading failed!\n");
-		goto load_netif_stop;
+		goto load_error3;
 	}
 
 	if (CHIP_IS_E1H(bp))
@@ -6447,7 +6493,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		for_each_nondefault_queue(bp, i) {
 			rc = bnx2x_setup_multi(bp, i);
 			if (rc)
-				goto load_netif_stop;
+				goto load_error3;
 		}
 
 	if (CHIP_IS_E1(bp))
@@ -6463,18 +6509,18 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	case LOAD_NORMAL:
 		/* Tx queue should be only reenabled */
 		netif_wake_queue(bp->dev);
+		/* Initialize the receive filter. */
 		bnx2x_set_rx_mode(bp->dev);
 		break;
 
 	case LOAD_OPEN:
 		netif_start_queue(bp->dev);
+		/* Initialize the receive filter. */
 		bnx2x_set_rx_mode(bp->dev);
-		if (bp->flags & USING_MSIX_FLAG)
-			printk(KERN_INFO PFX "%s: using MSI-X\n",
-			       bp->dev->name);
 		break;
 
 	case LOAD_DIAG:
+		/* Initialize the receive filter. */
 		bnx2x_set_rx_mode(bp->dev);
 		bp->state = BNX2X_STATE_DIAG;
 		break;
@@ -6492,20 +6538,25 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 
 	return 0;
 
-load_netif_stop:
-	bnx2x_napi_disable(bp);
-load_rings_free:
+load_error3:
+	bnx2x_int_disable_sync(bp, 1);
+	if (!BP_NOMCP(bp)) {
+		bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP);
+		bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+	}
+	bp->port.pmf = 0;
 	/* Free SKBs, SGEs, TPA pool and driver internals */
 	bnx2x_free_skbs(bp);
 	for_each_queue(bp, i)
 		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
-load_int_disable:
-	bnx2x_int_disable_sync(bp, 1);
+load_error2:
 	/* Release IRQs */
 	bnx2x_free_irq(bp);
-load_error:
+load_error1:
+	bnx2x_napi_disable(bp);
+	for_each_queue(bp, i)
+		netif_napi_del(&bnx2x_fp(bp, i, napi));
 	bnx2x_free_mem(bp);
-	bp->port.pmf = 0;
 
 	/* TBD we really need to reset the chip
 	   if we want to recover from this */
@@ -6578,6 +6629,7 @@ static int bnx2x_stop_leading(struct bnx2x *bp)
 		}
 		cnt--;
 		msleep(1);
+		rmb(); /* Refresh the dsb_sp_prod */
 	}
 	bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD;
 	bp->fp[0].state = BNX2X_FP_STATE_CLOSED;
@@ -6629,14 +6681,6 @@ static void bnx2x_reset_port(struct bnx2x *bp)
 	/* TODO: Close Doorbell port? */
 }
 
-static void bnx2x_reset_common(struct bnx2x *bp)
-{
-	/* reset_common */
-	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
-	       0xd3ffff7f);
-	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403);
-}
-
 static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code)
 {
 	DP(BNX2X_MSG_MCP, "function %d  reset_code %x\n",
@@ -6677,20 +6721,22 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 	bnx2x_set_storm_rx_mode(bp);
 
 	bnx2x_netif_stop(bp, 1);
-	if (!netif_running(bp->dev))
-		bnx2x_napi_disable(bp);
+
 	del_timer_sync(&bp->timer);
 	SHMEM_WR(bp, func_mb[BP_FUNC(bp)].drv_pulse_mb,
 		 (DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq));
 	bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
+	/* Release IRQs */
+	bnx2x_free_irq(bp);
+
 	/* Wait until tx fast path tasks complete */
 	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
 		cnt = 1000;
 		smp_rmb();
-		while (BNX2X_HAS_TX_WORK(fp)) {
+		while (bnx2x_has_tx_work_unload(fp)) {
 
 			bnx2x_tx_int(fp, 1000);
 			if (!cnt) {
@@ -6711,9 +6757,6 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 	/* Give HW time to discard old tx messages */
 	msleep(1);
 
-	/* Release IRQs */
-	bnx2x_free_irq(bp);
-
 	if (CHIP_IS_E1(bp)) {
 		struct mac_configuration_cmd *config =
 						bnx2x_sp(bp, mcast_config);
@@ -6822,6 +6865,8 @@ unload_error:
 	bnx2x_free_skbs(bp);
 	for_each_queue(bp, i)
 		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
+	for_each_queue(bp, i)
+		netif_napi_del(&bnx2x_fp(bp, i, napi));
 	bnx2x_free_mem(bp);
 
 	bp->state = BNX2X_STATE_CLOSED;
@@ -6874,10 +6919,6 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
 		 */
 		bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
 		val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
-		if (val == 0x7)
-			REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
-		bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
-
 		if (val == 0x7) {
 			u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
 			/* save our func */
@@ -6885,6 +6926,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
 			u32 swap_en;
 			u32 swap_val;
 
+			/* clear the UNDI indication */
+			REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
+
 			BNX2X_DEV_INFO("UNDI is active! reset device\n");
 
 			/* try unload UNDI on port 0 */
@@ -6910,6 +6954,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
 				bnx2x_fw_command(bp, reset_code);
 			}
 
+			/* now it's safe to release the lock */
+			bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+
 			REG_WR(bp, (BP_PORT(bp) ? HC_REG_CONFIG_1 :
 				    HC_REG_CONFIG_0), 0x1000);
 
@@ -6954,7 +7001,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
 			bp->fw_seq =
 			       (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
 				DRV_MSG_SEQ_NUMBER_MASK);
-		}
+
+		} else
+			bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
 	}
 }
 
@@ -6971,7 +7020,7 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
 	id |= ((val & 0xf) << 12);
 	val = REG_RD(bp, MISC_REG_CHIP_METAL);
 	id |= ((val & 0xff) << 4);
-	REG_RD(bp, MISC_REG_BOND_ID);
+	val = REG_RD(bp, MISC_REG_BOND_ID);
 	id |= (val & 0xf);
 	bp->common.chip_id = id;
 	bp->link_params.chip_id = bp->common.chip_id;
@@ -8103,6 +8152,9 @@ static int bnx2x_get_eeprom(struct net_device *dev,
 	struct bnx2x *bp = netdev_priv(dev);
 	int rc;
 
+	if (!netif_running(dev))
+		return -EAGAIN;
+
 	DP(BNX2X_MSG_NVM, "ethtool_eeprom: cmd %d\n"
 	   DP_LEVEL "  magic 0x%x  offset 0x%x (%d)  len 0x%x (%d)\n",
 	   eeprom->cmd, eeprom->magic, eeprom->offset, eeprom->offset,
@@ -8705,18 +8757,17 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode, u8 link_up)
 
 	if (loopback_mode == BNX2X_MAC_LOOPBACK) {
 		bp->link_params.loopback_mode = LOOPBACK_BMAC;
-		bnx2x_acquire_phy_lock(bp);
 		bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-		bnx2x_release_phy_lock(bp);
 
 	} else if (loopback_mode == BNX2X_PHY_LOOPBACK) {
+		u16 cnt = 1000;
 		bp->link_params.loopback_mode = LOOPBACK_XGXS_10;
-		bnx2x_acquire_phy_lock(bp);
 		bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-		bnx2x_release_phy_lock(bp);
 		/* wait until link state is restored */
-		bnx2x_wait_for_link(bp, link_up);
-
+		if (link_up)
+			while (cnt-- && bnx2x_test_link(&bp->link_params,
+							&bp->link_vars))
+				msleep(10);
 	} else
 		return -EINVAL;
 
@@ -8822,6 +8873,7 @@ static int bnx2x_test_loopback(struct bnx2x *bp, u8 link_up)
 		return BNX2X_LOOPBACK_FAILED;
 
 	bnx2x_netif_stop(bp, 1);
+	bnx2x_acquire_phy_lock(bp);
 
 	if (bnx2x_run_loopback(bp, BNX2X_MAC_LOOPBACK, link_up)) {
 		DP(NETIF_MSG_PROBE, "MAC loopback failed\n");
@@ -8833,6 +8885,7 @@ static int bnx2x_test_loopback(struct bnx2x *bp, u8 link_up)
 		rc |= BNX2X_PHY_LOOPBACK_FAILED;
 	}
 
+	bnx2x_release_phy_lock(bp);
 	bnx2x_netif_start(bp);
 
 	return rc;
@@ -8906,7 +8959,10 @@ static int bnx2x_test_intr(struct bnx2x *bp)
 		return -ENODEV;
 
 	config->hdr.length_6b = 0;
-	config->hdr.offset = 0;
+	if (CHIP_IS_E1(bp))
+		config->hdr.offset = (BP_PORT(bp) ? 32 : 0);
+	else
+		config->hdr.offset = BP_FUNC(bp);
 	config->hdr.client_id = BP_CL_ID(bp);
 	config->hdr.reserved1 = 0;
 
@@ -9271,6 +9327,18 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state)
 	return 0;
 }
 
+static inline int bnx2x_has_rx_work(struct bnx2x_fastpath *fp)
+{
+	u16 rx_cons_sb;
+
+	/* Tell compiler that status block fields can change */
+	barrier();
+	rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
+	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
+		rx_cons_sb++;
+	return (fp->rx_comp_cons != rx_cons_sb);
+}
+
 /*
  * net_device service functions
  */
@@ -9281,7 +9349,6 @@ static int bnx2x_poll(struct napi_struct *napi, int budget)
 						 napi);
 	struct bnx2x *bp = fp->bp;
 	int work_done = 0;
-	u16 rx_cons_sb;
 
 #ifdef BNX2X_STOP_ON_ERROR
 	if (unlikely(bp->panic))
@@ -9294,19 +9361,12 @@ static int bnx2x_poll(struct napi_struct *napi, int budget)
 
 	bnx2x_update_fpsb_idx(fp);
 
-	if (BNX2X_HAS_TX_WORK(fp))
+	if (bnx2x_has_tx_work(fp))
 		bnx2x_tx_int(fp, budget);
 
-	rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
-	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
-		rx_cons_sb++;
-	if (BNX2X_HAS_RX_WORK(fp))
+	if (bnx2x_has_rx_work(fp))
 		work_done = bnx2x_rx_int(fp, budget);
-
 	rmb(); /* BNX2X_HAS_WORK() reads the status block */
-	rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
-	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
-		rx_cons_sb++;
 
 	/* must not complete if we consumed full budget */
 	if ((work_done < budget) && !BNX2X_HAS_WORK(fp)) {
@@ -9417,6 +9477,7 @@ static inline u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb)
 	return rc;
 }
 
+#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
 /* check if packet requires linearization (packet is too fragmented) */
 static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb,
 			     u32 xmit_type)
@@ -9494,6 +9555,7 @@ exit_lbl:
 
 	return to_copy;
 }
+#endif
 
 /* called with netif_tx_lock
  * bnx2x_tx_int() runs without netif_tx_lock unless it needs to call
@@ -9534,6 +9596,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	   skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr,
 	   ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type);
 
+#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
 	/* First, check if we need to linearize the skb
 	   (due to FW restrictions) */
 	if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) {
@@ -9546,6 +9609,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			return NETDEV_TX_OK;
 		}
 	}
+#endif
 
 	/*
 	Please read carefully. First we use one BD which we mark as start,
@@ -9776,6 +9840,8 @@ static int bnx2x_open(struct net_device *dev)
 {
 	struct bnx2x *bp = netdev_priv(dev);
 
+	netif_carrier_off(dev);
+
 	bnx2x_set_power_state(bp, PCI_D0);
 
 	return bnx2x_nic_load(bp, LOAD_OPEN);
@@ -9859,7 +9925,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev)
 				for (; i < old; i++) {
 					if (CAM_IS_INVALID(config->
 							   config_table[i])) {
-						i--; /* already invalidated */
+						/* already invalidated */
 						break;
 					}
 					/* invalidate */
@@ -10269,22 +10335,18 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 		return rc;
 	}
 
-	rc = register_netdev(dev);
-	if (rc) {
-		dev_err(&pdev->dev, "Cannot register net device\n");
-		goto init_one_exit;
-	}
-
 	pci_set_drvdata(pdev, dev);
 
 	rc = bnx2x_init_bp(bp);
+	if (rc)
+		goto init_one_exit;
+
+	rc = register_netdev(dev);
 	if (rc) {
-		unregister_netdev(dev);
+		dev_err(&pdev->dev, "Cannot register net device\n");
 		goto init_one_exit;
 	}
 
-	netif_carrier_off(dev);
-
 	bp->common.name = board_info[ent->driver_data].name;
 	printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx,"
 	       " IRQ %d, ", dev->name, bp->common.name,
@@ -10432,6 +10494,8 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
 	bnx2x_free_skbs(bp);
 	for_each_queue(bp, i)
 		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
+	for_each_queue(bp, i)
+		netif_napi_del(&bnx2x_fp(bp, i, napi));
 	bnx2x_free_mem(bp);
 
 	bp->state = BNX2X_STATE_CLOSED;
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index a67b0c358ae..d084e5fc4b5 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -1,6 +1,6 @@
 /* bnx2x_reg.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2008 Broadcom Corporation
+ * Copyright (c) 2007-2009 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 840b3d1a22f..bbbc3bb08aa 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -806,7 +806,7 @@ static int cas_reset_mii_phy(struct cas *cp)
 
 	cas_phy_write(cp, MII_BMCR, BMCR_RESET);
 	udelay(100);
-	while (limit--) {
+	while (--limit) {
 		val = cas_phy_read(cp, MII_BMCR);
 		if ((val & BMCR_RESET) == 0)
 			break;
@@ -979,7 +979,7 @@ static void cas_phy_init(struct cas *cp)
 		writel(val, cp->regs + REG_PCS_MII_CTRL);
 
 		limit = STOP_TRIES;
-		while (limit-- > 0) {
+		while (--limit > 0) {
 			udelay(10);
 			if ((readl(cp->regs + REG_PCS_MII_CTRL) &
 			     PCS_MII_RESET) == 0)
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 14f9fb3e879..d31791f6029 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -2104,6 +2104,7 @@ static void init_lro_mgr(struct sge_qset *qs, struct net_lro_mgr *lro_mgr)
 {
 	lro_mgr->dev = qs->netdev;
 	lro_mgr->features = LRO_F_NAPI;
+	lro_mgr->frag_align_pad = NET_IP_ALIGN;
 	lro_mgr->ip_summed = CHECKSUM_UNNECESSARY;
 	lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
 	lro_mgr->max_desc = T3_MAX_LRO_SES;
@@ -2275,8 +2276,7 @@ no_mem:
 		} else if ((len = ntohl(r->len_cq)) != 0) {
 			struct sge_fl *fl;
 
-			if (eth)
-				lro = qs->lro_enabled && is_eth_tcp(rss_hi);
+			lro &= eth && is_eth_tcp(rss_hi);
 
 			fl = (len & F_RSPD_FLQ) ? &qs->fl[1] : &qs->fl[0];
 			if (fl->use_pages) {
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 26474c92193..6bd63cc67b3 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -31,7 +31,7 @@
 
 char e1000_driver_name[] = "e1000";
 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
-#define DRV_VERSION "7.3.20-k3-NAPI"
+#define DRV_VERSION "7.3.21-k3-NAPI"
 const char e1000_driver_version[] = DRV_VERSION;
 static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
 
@@ -940,7 +940,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		err = pci_enable_device(pdev);
 	} else {
 		bars = pci_select_bars(pdev, IORESOURCE_MEM);
-		err = pci_enable_device(pdev);
+		err = pci_enable_device_mem(pdev);
 	}
 	if (err)
 		return err;
@@ -3712,7 +3712,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
 	struct e1000_hw *hw = &adapter->hw;
 	u32 rctl, icr = er32(ICR);
 
-	if (unlikely(!icr))
+	if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags)))
 		return IRQ_NONE;  /* Not our interrupt */
 
 	/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index cf43ee743b3..0890162953e 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -981,11 +981,15 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
 		ew32(PBA_ECC, reg);
 	}
 
-	/* PCI-Ex Control Register */
+	/* PCI-Ex Control Registers */
 	if (hw->mac.type == e1000_82574) {
 		reg = er32(GCR);
 		reg |= (1 << 22);
 		ew32(GCR, reg);
+
+		reg = er32(GCR2);
+		reg |= 1;
+		ew32(GCR2, reg);
 	}
 
 	return;
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index f25e961c6b3..2d4ce0492df 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -206,6 +206,7 @@ enum e1e_registers {
 	E1000_MANC2H    = 0x05860, /* Management Control To Host - RW */
 	E1000_SW_FW_SYNC = 0x05B5C, /* Software-Firmware Synchronization - RW */
 	E1000_GCR	= 0x05B00, /* PCI-Ex Control */
+	E1000_GCR2      = 0x05B64, /* PCI-Ex Control #2 */
 	E1000_FACTPS    = 0x05B30, /* Function Active and Power State to MNG */
 	E1000_SWSM      = 0x05B50, /* SW Semaphore */
 	E1000_FWSM      = 0x05B54, /* FW Semaphore */
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 7e33c129d51..2769083bfe8 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -1698,7 +1698,7 @@ static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_priva
 	/*
 	 * Set MII speed to 2.5 MHz
 	 */
-	fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
+	fep->phy_speed = (MCF_CLK / 3) / (2500000 * 2 ) * 2;
 	fecp->fec_mii_speed = fep->phy_speed;
 
 	fec_restart(dev, 0);
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index ea530673236..acae2d8cd68 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -351,6 +351,9 @@ static int gfar_probe(struct of_device *ofdev,
 	/* Reset MAC layer */
 	gfar_write(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
 
+	/* We need to delay at least 3 TX clocks */
+	udelay(2);
+
 	tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
 	gfar_write(&priv->regs->maccfg1, tempval);
 
@@ -1423,15 +1426,11 @@ static void gfar_vlan_rx_register(struct net_device *dev,
 {
 	struct gfar_private *priv = netdev_priv(dev);
 	unsigned long flags;
-	struct vlan_group *old_grp;
 	u32 tempval;
 
 	spin_lock_irqsave(&priv->rxlock, flags);
 
-	old_grp = priv->vlgrp;
-
-	if (old_grp == grp)
-		return;
+	priv->vlgrp = grp;
 
 	if (grp) {
 		/* Enable VLAN tag insertion */
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index b1a83344acc..eaa86897f5c 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -312,7 +312,7 @@ extern const char gfar_driver_version[];
 #define ATTRELI_EI(x) (x)
 
 #define BD_LFLAG(flags) ((flags) << 16)
-#define BD_LENGTH_MASK		0x00ff
+#define BD_LENGTH_MASK		0x0000ffff
 
 /* TxBD status field bits */
 #define TXBD_READY		0x8000
diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c
index f3706e415b4..f49a426ad68 100644
--- a/drivers/net/gianfar_mii.c
+++ b/drivers/net/gianfar_mii.c
@@ -234,6 +234,8 @@ static int gfar_mdio_probe(struct of_device *ofdev,
 	if (NULL == new_bus)
 		return -ENOMEM;
 
+	device_init_wakeup(&ofdev->dev, 1);
+
 	new_bus->name = "Gianfar MII Bus",
 	new_bus->read = &gfar_mdio_read,
 	new_bus->write = &gfar_mdio_write,
diff --git a/drivers/net/ibm_newemac/phy.c b/drivers/net/ibm_newemac/phy.c
index c40cd8df221..ac9d964e59e 100644
--- a/drivers/net/ibm_newemac/phy.c
+++ b/drivers/net/ibm_newemac/phy.c
@@ -60,7 +60,7 @@ int emac_mii_reset_phy(struct mii_phy *phy)
 
 	udelay(300);
 
-	while (limit--) {
+	while (--limit) {
 		val = phy_read(phy, MII_BMCR);
 		if (val >= 0 && (val & BMCR_RESET) == 0)
 			break;
@@ -84,7 +84,7 @@ int emac_mii_reset_gpcs(struct mii_phy *phy)
 
 	udelay(300);
 
-	while (limit--) {
+	while (--limit) {
 		val = gpcs_phy_read(phy, MII_BMCR);
 		if (val >= 0 && (val & BMCR_RESET) == 0)
 			break;
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index f5e2e7235fc..13ca73f96ec 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -699,11 +699,18 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw)
 
 	/* SGMII link check is done through the PCS register. */
 	if ((hw->phy.media_type != e1000_media_type_copper) ||
-	    (igb_sgmii_active_82575(hw)))
+	    (igb_sgmii_active_82575(hw))) {
 		ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed,
 		                                             &duplex);
-	else
+		/*
+		 * Use this flag to determine if link needs to be checked or
+		 * not.  If  we have link clear the flag so that we do not
+		 * continue to check for link.
+		 */
+		hw->mac.get_link_status = !hw->mac.serdes_has_link;
+	} else {
 		ret_val = igb_check_for_copper_link(hw);
+	}
 
 	return ret_val;
 }
diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index 5a27825cc48..aebef8e48e7 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -300,11 +300,10 @@ struct igb_adapter {
 
 #define IGB_FLAG_HAS_MSI           (1 << 0)
 #define IGB_FLAG_MSI_ENABLE        (1 << 1)
-#define IGB_FLAG_HAS_DCA           (1 << 2)
-#define IGB_FLAG_DCA_ENABLED       (1 << 3)
-#define IGB_FLAG_IN_NETPOLL        (1 << 5)
-#define IGB_FLAG_QUAD_PORT_A       (1 << 6)
-#define IGB_FLAG_NEED_CTX_IDX      (1 << 7)
+#define IGB_FLAG_DCA_ENABLED       (1 << 2)
+#define IGB_FLAG_IN_NETPOLL        (1 << 3)
+#define IGB_FLAG_QUAD_PORT_A       (1 << 4)
+#define IGB_FLAG_NEED_CTX_IDX      (1 << 5)
 
 enum e1000_state_t {
 	__IGB_TESTING,
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index b82b0fb2056..a50db5398fa 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -206,10 +206,11 @@ static int __init igb_init_module(void)
 
 	global_quad_port_a = 0;
 
-	ret = pci_register_driver(&igb_driver);
 #ifdef CONFIG_IGB_DCA
 	dca_register_notify(&dca_notifier);
 #endif
+
+	ret = pci_register_driver(&igb_driver);
 	return ret;
 }
 
@@ -1156,11 +1157,10 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 
 	/* set flags */
 	switch (hw->mac.type) {
-	case e1000_82576:
 	case e1000_82575:
-		adapter->flags |= IGB_FLAG_HAS_DCA;
 		adapter->flags |= IGB_FLAG_NEED_CTX_IDX;
 		break;
+	case e1000_82576:
 	default:
 		break;
 	}
@@ -1310,8 +1310,7 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 		goto err_register;
 
 #ifdef CONFIG_IGB_DCA
-	if ((adapter->flags & IGB_FLAG_HAS_DCA) &&
-	    (dca_add_requester(&pdev->dev) == 0)) {
+	if (dca_add_requester(&pdev->dev) == 0) {
 		adapter->flags |= IGB_FLAG_DCA_ENABLED;
 		dev_info(&pdev->dev, "DCA enabled\n");
 		/* Always use CB2 mode, difference is masked
@@ -1835,11 +1834,11 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
 	rctl |= E1000_RCTL_SECRC;
 
 	/*
-	 * disable store bad packets, long packet enable, and clear size bits.
+	 * disable store bad packets and clear size bits.
 	 */
-	rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_LPE | E1000_RCTL_SZ_256);
+	rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256);
 
-	if (adapter->netdev->mtu > ETH_DATA_LEN)
+	/* enable LPE when to prevent packets larger than max_frame_size */
 		rctl |= E1000_RCTL_LPE;
 
 	/* Setup buffer sizes */
@@ -1865,7 +1864,7 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
 	 */
 	/* allocations using alloc_page take too long for regular MTU
 	 * so only enable packet split for jumbo frames */
-	if (rctl & E1000_RCTL_LPE) {
+	if (adapter->netdev->mtu > ETH_DATA_LEN) {
 		adapter->rx_ps_hdr_size = IGB_RXBUFFER_128;
 		srrctl |= adapter->rx_ps_hdr_size <<
 			 E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
@@ -3473,19 +3472,16 @@ static int __igb_notify_dca(struct device *dev, void *data)
 	struct e1000_hw *hw = &adapter->hw;
 	unsigned long event = *(unsigned long *)data;
 
-	if (!(adapter->flags & IGB_FLAG_HAS_DCA))
-		goto out;
-
 	switch (event) {
 	case DCA_PROVIDER_ADD:
 		/* if already enabled, don't do it again */
 		if (adapter->flags & IGB_FLAG_DCA_ENABLED)
 			break;
-		adapter->flags |= IGB_FLAG_DCA_ENABLED;
 		/* Always use CB2 mode, difference is masked
 		 * in the CB driver. */
 		wr32(E1000_DCA_CTRL, 2);
 		if (dca_add_requester(dev) == 0) {
+			adapter->flags |= IGB_FLAG_DCA_ENABLED;
 			dev_info(&adapter->pdev->dev, "DCA enabled\n");
 			igb_setup_dca(adapter);
 			break;
@@ -3502,7 +3498,7 @@ static int __igb_notify_dca(struct device *dev, void *data)
 		}
 		break;
 	}
-out:
+
 	return 0;
 }
 
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index acef3c65cd2..d2f4d5f508b 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -318,6 +318,9 @@ static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter,
 		rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
 		rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN;
 		rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN;
+		rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN);
+		rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
+			    IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q), rxctrl);
 		rx_ring->cpu = cpu;
 	}
@@ -1741,6 +1744,32 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 	IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
 }
 
+static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	/* add VID to filter table */
+	hw->mac.ops.set_vfta(&adapter->hw, vid, 0, true);
+}
+
+static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	if (!test_bit(__IXGBE_DOWN, &adapter->state))
+		ixgbe_irq_disable(adapter);
+
+	vlan_group_set_device(adapter->vlgrp, vid, NULL);
+
+	if (!test_bit(__IXGBE_DOWN, &adapter->state))
+		ixgbe_irq_enable(adapter);
+
+	/* remove VID from filter table */
+	hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false);
+}
+
 static void ixgbe_vlan_rx_register(struct net_device *netdev,
                                    struct vlan_group *grp)
 {
@@ -1760,6 +1789,7 @@ static void ixgbe_vlan_rx_register(struct net_device *netdev,
 	ctrl |= IXGBE_VLNCTRL_VME;
 	ctrl &= ~IXGBE_VLNCTRL_CFIEN;
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
+	ixgbe_vlan_rx_add_vid(netdev, 0);
 
 	if (grp) {
 		/* enable VLAN tag insert/strip */
@@ -1773,32 +1803,6 @@ static void ixgbe_vlan_rx_register(struct net_device *netdev,
 		ixgbe_irq_enable(adapter);
 }
 
-static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
-{
-	struct ixgbe_adapter *adapter = netdev_priv(netdev);
-	struct ixgbe_hw *hw = &adapter->hw;
-
-	/* add VID to filter table */
-	hw->mac.ops.set_vfta(&adapter->hw, vid, 0, true);
-}
-
-static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
-{
-	struct ixgbe_adapter *adapter = netdev_priv(netdev);
-	struct ixgbe_hw *hw = &adapter->hw;
-
-	if (!test_bit(__IXGBE_DOWN, &adapter->state))
-		ixgbe_irq_disable(adapter);
-
-	vlan_group_set_device(adapter->vlgrp, vid, NULL);
-
-	if (!test_bit(__IXGBE_DOWN, &adapter->state))
-		ixgbe_irq_enable(adapter);
-
-	/* remove VID from filter table */
-	hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false);
-}
-
 static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter)
 {
 	ixgbe_vlan_rx_register(adapter->netdev, adapter->vlgrp);
@@ -2074,6 +2078,9 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 
 	ixgbe_irq_enable(adapter);
 
+	/* enable transmits */
+	netif_tx_start_all_queues(netdev);
+
 	/* bring the link up in the watchdog, this could race with our first
 	 * link up interrupt but shouldn't be a problem */
 	adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
@@ -3475,7 +3482,6 @@ static void ixgbe_watchdog_task(struct work_struct *work)
 			        (FLOW_TX ? "TX" : "None"))));
 
 			netif_carrier_on(netdev);
-			netif_tx_wake_all_queues(netdev);
 		} else {
 			/* Force detection of hung controller */
 			adapter->detect_tx_hung = true;
@@ -3487,7 +3493,6 @@ static void ixgbe_watchdog_task(struct work_struct *work)
 			printk(KERN_INFO "ixgbe: %s NIC Link is Down\n",
 			       netdev->name);
 			netif_carrier_off(netdev);
-			netif_tx_stop_all_queues(netdev);
 		}
 	}
 
@@ -4218,7 +4223,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	}
 
 	netif_carrier_off(netdev);
-	netif_tx_stop_all_queues(netdev);
 
 	strcpy(netdev->name, "eth%d");
 	err = register_netdev(netdev);
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 83a11ff9ffd..f011c57c920 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -404,6 +404,9 @@
 #define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */
 #define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */
 #define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */
+#define IXGBE_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */
+#define IXGBE_DCA_RXCTRL_DESC_WRO_EN (1 << 13) /* DCA Rx wr Desc Relax Order */
+#define IXGBE_DCA_RXCTRL_DESC_HSRO_EN (1 << 15) /* DCA Rx Split Header RO */
 
 #define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
 #define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 1d6e48e1336..75010cac76a 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -416,6 +416,9 @@ static int korina_rx(struct net_device *dev, int limit)
 			if (devcs & ETH_RX_MP)
 				dev->stats.multicast++;
 
+			/* 16 bit align */
+			skb_reserve(skb_new, 2);
+
 			lp->rx_skb[lp->rx_next_done] = skb_new;
 		}
 
@@ -740,6 +743,7 @@ static struct ethtool_ops netdev_ethtool_ops = {
 static void korina_alloc_ring(struct net_device *dev)
 {
 	struct korina_private *lp = netdev_priv(dev);
+	struct sk_buff *skb;
 	int i;
 
 	/* Initialize the transmit descriptors */
@@ -755,8 +759,6 @@ static void korina_alloc_ring(struct net_device *dev)
 
 	/* Initialize the receive descriptors */
 	for (i = 0; i < KORINA_NUM_RDS; i++) {
-		struct sk_buff *skb = lp->rx_skb[i];
-
 		skb = dev_alloc_skb(KORINA_RBSIZE + 2);
 		if (!skb)
 			break;
@@ -769,11 +771,12 @@ static void korina_alloc_ring(struct net_device *dev)
 		lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]);
 	}
 
-	/* loop back */
-	lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[0]);
-	lp->rx_next_done  = 0;
+	/* loop back receive descriptors, so the last
+	 * descriptor points to the first one */
+	lp->rd_ring[i - 1].link = CPHYSADDR(&lp->rd_ring[0]);
+	lp->rd_ring[i - 1].control |= DMA_DESC_COD;
 
-	lp->rd_ring[i].control |= DMA_DESC_COD;
+	lp->rx_next_done  = 0;
 	lp->rx_chain_head = 0;
 	lp->rx_chain_tail = 0;
 	lp->rx_chain_status = desc_empty;
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index a04da4ecaa8..f6c4936e2fa 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -321,6 +321,10 @@ static void macb_tx(struct macb *bp)
 		printk(KERN_ERR "%s: TX underrun, resetting buffers\n",
 			bp->dev->name);
 
+		/* Transfer ongoing, disable transmitter, to avoid confusion */
+		if (status & MACB_BIT(TGO))
+			macb_writel(bp, NCR, macb_readl(bp, NCR) & ~MACB_BIT(TE));
+
 		head = bp->tx_head;
 
 		/*Mark all the buffer as used to avoid sending a lost buffer*/
@@ -343,6 +347,10 @@ static void macb_tx(struct macb *bp)
 		}
 
 		bp->tx_head = bp->tx_tail = 0;
+
+		/* Enable the transmitter again */
+		if (status & MACB_BIT(TGO))
+			macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(TE));
 	}
 
 	if (!(status & MACB_BIT(COMP)))
diff --git a/drivers/net/mlx4/profile.c b/drivers/net/mlx4/profile.c
index 919fb9eb1b6..cebdf3243ca 100644
--- a/drivers/net/mlx4/profile.c
+++ b/drivers/net/mlx4/profile.c
@@ -107,9 +107,9 @@ u64 mlx4_make_profile(struct mlx4_dev *dev,
 	profile[MLX4_RES_AUXC].num    = request->num_qp;
 	profile[MLX4_RES_SRQ].num     = request->num_srq;
 	profile[MLX4_RES_CQ].num      = request->num_cq;
-	profile[MLX4_RES_EQ].num      = min(dev_cap->max_eqs,
-					    dev_cap->reserved_eqs +
-					    num_possible_cpus() + 1);
+	profile[MLX4_RES_EQ].num      = min_t(unsigned, dev_cap->max_eqs,
+					      dev_cap->reserved_eqs +
+					      num_possible_cpus() + 1);
 	profile[MLX4_RES_DMPT].num    = request->num_mpt;
 	profile[MLX4_RES_CMPT].num    = MLX4_NUM_CMPTS;
 	profile[MLX4_RES_MTT].num     = request->num_mtt;
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 7253a499d9c..5f31bbb614a 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -136,21 +136,23 @@ static char mv643xx_eth_driver_version[] = "1.4";
 /*
  * SDMA configuration register.
  */
+#define RX_BURST_SIZE_4_64BIT		(2 << 1)
 #define RX_BURST_SIZE_16_64BIT		(4 << 1)
 #define BLM_RX_NO_SWAP			(1 << 4)
 #define BLM_TX_NO_SWAP			(1 << 5)
+#define TX_BURST_SIZE_4_64BIT		(2 << 22)
 #define TX_BURST_SIZE_16_64BIT		(4 << 22)
 
 #if defined(__BIG_ENDIAN)
 #define PORT_SDMA_CONFIG_DEFAULT_VALUE		\
-		(RX_BURST_SIZE_16_64BIT	|	\
-		TX_BURST_SIZE_16_64BIT)
+		(RX_BURST_SIZE_4_64BIT	|	\
+		 TX_BURST_SIZE_4_64BIT)
 #elif defined(__LITTLE_ENDIAN)
 #define PORT_SDMA_CONFIG_DEFAULT_VALUE		\
-		(RX_BURST_SIZE_16_64BIT	|	\
-		BLM_RX_NO_SWAP		|	\
-		BLM_TX_NO_SWAP		|	\
-		TX_BURST_SIZE_16_64BIT)
+		(RX_BURST_SIZE_4_64BIT	|	\
+		 BLM_RX_NO_SWAP		|	\
+		 BLM_TX_NO_SWAP		|	\
+		 TX_BURST_SIZE_4_64BIT)
 #else
 #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined
 #endif
@@ -1594,7 +1596,7 @@ oom:
 			entry = addr_crc(a);
 		}
 
-		table[entry >> 2] |= 1 << (entry & 3);
+		table[entry >> 2] |= 1 << (8 * (entry & 3));
 	}
 
 	for (i = 0; i < 0x100; i += 4) {
@@ -2210,6 +2212,7 @@ static int mv643xx_eth_stop(struct net_device *dev)
 	struct mv643xx_eth_private *mp = netdev_priv(dev);
 	int i;
 
+	wrlp(mp, INT_MASK_EXT, 0x00000000);
 	wrlp(mp, INT_MASK, 0x00000000);
 	rdlp(mp, INT_MASK);
 
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 6bb71b687f7..e9c1296b267 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -1,7 +1,7 @@
 /*************************************************************************
  * myri10ge.c: Myricom Myri-10G Ethernet driver.
  *
- * Copyright (C) 2005 - 2007 Myricom, Inc.
+ * Copyright (C) 2005 - 2009 Myricom, Inc.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -75,7 +75,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.4.4-1.398"
+#define MYRI10GE_VERSION_STR "1.4.4-1.401"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -3786,7 +3786,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (status != 0) {
 		dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n",
 			status);
-		goto abort_with_netdev;
+		goto abort_with_enabled;
 	}
 
 	pci_set_master(pdev);
@@ -3801,13 +3801,13 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 	if (status != 0) {
 		dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
-		goto abort_with_netdev;
+		goto abort_with_enabled;
 	}
 	(void)pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
 	mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
 				      &mgp->cmd_bus, GFP_KERNEL);
 	if (mgp->cmd == NULL)
-		goto abort_with_netdev;
+		goto abort_with_enabled;
 
 	mgp->board_span = pci_resource_len(pdev, 0);
 	mgp->iomem_base = pci_resource_start(pdev, 0);
@@ -3943,8 +3943,10 @@ abort_with_mtrr:
 	dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
 			  mgp->cmd, mgp->cmd_bus);
 
-abort_with_netdev:
+abort_with_enabled:
+	pci_disable_device(pdev);
 
+abort_with_netdev:
 	free_netdev(netdev);
 	return status;
 }
@@ -3990,6 +3992,7 @@ static void myri10ge_remove(struct pci_dev *pdev)
 			  mgp->cmd, mgp->cmd_bus);
 
 	free_netdev(netdev);
+	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
 }
 
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index c11c568fd7d..9c78c963b72 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -146,7 +146,7 @@
 
 #define MAX_RX_BUFFER_LENGTH		1760
 #define MAX_RX_JUMBO_BUFFER_LENGTH 	8062
-#define MAX_RX_LRO_BUFFER_LENGTH	((48*1024)-512)
+#define MAX_RX_LRO_BUFFER_LENGTH	(8062)
 #define RX_DMA_MAP_LEN			(MAX_RX_BUFFER_LENGTH - 2)
 #define RX_JUMBO_DMA_MAP_LEN	\
 	(MAX_RX_JUMBO_BUFFER_LENGTH - 2)
@@ -207,11 +207,11 @@
 
 #define MAX_CMD_DESCRIPTORS		4096
 #define MAX_RCV_DESCRIPTORS		16384
-#define MAX_CMD_DESCRIPTORS_HOST	(MAX_CMD_DESCRIPTORS / 4)
-#define MAX_RCV_DESCRIPTORS_1G		(MAX_RCV_DESCRIPTORS / 4)
-#define MAX_RCV_DESCRIPTORS_10G		8192
+#define MAX_CMD_DESCRIPTORS_HOST	1024
+#define MAX_RCV_DESCRIPTORS_1G		2048
+#define MAX_RCV_DESCRIPTORS_10G		4096
 #define MAX_JUMBO_RCV_DESCRIPTORS	1024
-#define MAX_LRO_RCV_DESCRIPTORS		64
+#define MAX_LRO_RCV_DESCRIPTORS		8
 #define MAX_RCVSTATUS_DESCRIPTORS	MAX_RCV_DESCRIPTORS
 #define MAX_JUMBO_RCV_DESC	MAX_JUMBO_RCV_DESCRIPTORS
 #define MAX_RCV_DESC		MAX_RCV_DESCRIPTORS
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index c0bd40fcf70..0894a7be022 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -561,7 +561,10 @@ netxen_nic_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
 	}
 	ring->tx_pending = adapter->max_tx_desc_count;
 
-	ring->rx_max_pending = MAX_RCV_DESCRIPTORS;
+	if (adapter->ahw.board_type == NETXEN_NIC_GBE)
+		ring->rx_max_pending = MAX_RCV_DESCRIPTORS_1G;
+	else
+		ring->rx_max_pending = MAX_RCV_DESCRIPTORS_10G;
 	ring->tx_max_pending = MAX_CMD_DESCRIPTORS_HOST;
 	ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS;
 	ring->rx_mini_max_pending = 0;
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index ca7c8d8050c..ffd37bea162 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -947,8 +947,10 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 	}
 	for (i = 0; i < n; i++) {
 		if (netxen_rom_fast_read(adapter, 8*i + 4*offset, &val) != 0 ||
-		netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0)
+		netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) {
+			kfree(buf);
 			return -EIO;
+		}
 
 		buf[i].addr = addr;
 		buf[i].data = val;
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index d854f07ef4d..645d384fe87 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -735,17 +735,18 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops);
 
-	/* ScatterGather support */
-	netdev->features = NETIF_F_SG;
-	netdev->features |= NETIF_F_IP_CSUM;
-	netdev->features |= NETIF_F_TSO;
+	netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+	netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+
 	if (NX_IS_REVISION_P3(revision_id)) {
-		netdev->features |= NETIF_F_IPV6_CSUM;
-		netdev->features |= NETIF_F_TSO6;
+		netdev->features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
+		netdev->vlan_features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
 	}
 
-	if (adapter->pci_using_dac)
+	if (adapter->pci_using_dac) {
 		netdev->features |= NETIF_F_HIGHDMA;
+		netdev->vlan_features |= NETIF_F_HIGHDMA;
+	}
 
 	/*
 	 * Set the CRB window to invalid. If any register in window 0 is
@@ -1166,6 +1167,14 @@ static bool netxen_tso_check(struct net_device *netdev,
 {
 	bool tso = false;
 	u8 opcode = TX_ETHER_PKT;
+	__be16 protocol = skb->protocol;
+	u16 flags = 0;
+
+	if (protocol == __constant_htons(ETH_P_8021Q)) {
+		struct vlan_ethhdr *vh = (struct vlan_ethhdr *)skb->data;
+		protocol = vh->h_vlan_encapsulated_proto;
+		flags = FLAGS_VLAN_TAGGED;
+	}
 
 	if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
 			skb_shinfo(skb)->gso_size > 0) {
@@ -1174,21 +1183,21 @@ static bool netxen_tso_check(struct net_device *netdev,
 		desc->total_hdr_length =
 			skb_transport_offset(skb) + tcp_hdrlen(skb);
 
-		opcode = (skb->protocol == htons(ETH_P_IPV6)) ?
+		opcode = (protocol == __constant_htons(ETH_P_IPV6)) ?
 				TX_TCP_LSO6 : TX_TCP_LSO;
 		tso = true;
 
 	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		u8 l4proto;
 
-		if (skb->protocol == htons(ETH_P_IP)) {
+		if (protocol == __constant_htons(ETH_P_IP)) {
 			l4proto = ip_hdr(skb)->protocol;
 
 			if (l4proto == IPPROTO_TCP)
 				opcode = TX_TCP_PKT;
 			else if(l4proto == IPPROTO_UDP)
 				opcode = TX_UDP_PKT;
-		} else if (skb->protocol == htons(ETH_P_IPV6)) {
+		} else if (protocol == __constant_htons(ETH_P_IPV6)) {
 			l4proto = ipv6_hdr(skb)->nexthdr;
 
 			if (l4proto == IPPROTO_TCP)
@@ -1199,7 +1208,7 @@ static bool netxen_tso_check(struct net_device *netdev,
 	}
 	desc->tcp_hdr_offset = skb_transport_offset(skb);
 	desc->ip_hdr_offset = skb_network_offset(skb);
-	netxen_set_tx_flags_opcode(desc, 0, opcode);
+	netxen_set_tx_flags_opcode(desc, flags, opcode);
 	return tso;
 }
 
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index c38ed777f0a..a6999403f37 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -586,7 +586,7 @@ static int pcnet_config(struct pcmcia_device *link)
     }
 
     if ((link->conf.ConfigBase == 0x03c0)
-	&& (link->manf_id == 0x149) && (link->card_id = 0xc1ab)) {
+	&& (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
 	printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n");
 	printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n");
 	goto failed;
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 11adf6ed462..811a637695c 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -296,9 +296,8 @@ static int mdio_bus_suspend(struct device * dev, pm_message_t state)
 	struct phy_driver *phydrv = to_phy_driver(drv);
 	struct phy_device *phydev = to_phy_device(dev);
 
-	if ((!device_may_wakeup(phydev->dev.parent)) &&
-		(phydrv && phydrv->suspend))
-			ret = phydrv->suspend(phydev);
+	if (drv && phydrv->suspend && !device_may_wakeup(phydev->dev.parent))
+		ret = phydrv->suspend(phydev);
 
 	return ret;
 }
@@ -310,8 +309,7 @@ static int mdio_bus_resume(struct device * dev)
 	struct phy_driver *phydrv = to_phy_driver(drv);
 	struct phy_device *phydev = to_phy_device(dev);
 
-	if ((!device_may_wakeup(phydev->dev.parent)) &&
-		(phydrv && phydrv->resume))
+	if (drv && phydrv->resume && !device_may_wakeup(phydev->dev.parent))
 		ret = phydrv->resume(phydev);
 
 	return ret;
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index c05d38d4635..1387187543e 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -81,6 +81,9 @@ static struct phy_driver lan83c185_driver = {
 	.ack_interrupt	= smsc_phy_ack_interrupt,
 	.config_intr	= smsc_phy_config_intr,
 
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+
 	.driver		= { .owner = THIS_MODULE, }
 };
 
@@ -102,6 +105,9 @@ static struct phy_driver lan8187_driver = {
 	.ack_interrupt	= smsc_phy_ack_interrupt,
 	.config_intr	= smsc_phy_config_intr,
 
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+
 	.driver		= { .owner = THIS_MODULE, }
 };
 
@@ -123,6 +129,9 @@ static struct phy_driver lan8700_driver = {
 	.ack_interrupt	= smsc_phy_ack_interrupt,
 	.config_intr	= smsc_phy_config_intr,
 
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+
 	.driver		= { .owner = THIS_MODULE, }
 };
 
@@ -144,6 +153,9 @@ static struct phy_driver lan911x_int_driver = {
 	.ack_interrupt	= smsc_phy_ack_interrupt,
 	.config_intr	= smsc_phy_config_intr,
 
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+
 	.driver		= { .owner = THIS_MODULE, }
 };
 
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index ec231424668..335da4831ab 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -2168,7 +2168,7 @@ static void gelic_wl_connected_event(struct gelic_wl_info *wl,
 		complete(&wl->assoc_done);
 		netif_carrier_on(port_to_netdev(wl_port(wl)));
 	} else
-		pr_debug("%s: event %#lx under wpa\n",
+		pr_debug("%s: event %#llx under wpa\n",
 				 __func__, event);
 }
 
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index c1dadadfab1..e6fdce9206c 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -787,12 +787,12 @@ struct mbox_params {
 
 struct flash_params {
 	u8 dev_id_str[4];
-	u16 size;
-	u16 csum;
-	u16 ver;
-	u16 sub_dev_id;
+	__le16 size;
+	__le16 csum;
+	__le16 ver;
+	__le16 sub_dev_id;
 	u8 mac_addr[6];
-	u16 res;
+	__le16 res;
 };
 
 
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 45421c8b601..3d1d7b6e55a 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -641,7 +641,7 @@ static void ql_enable_all_completion_interrupts(struct ql_adapter *qdev)
 
 }
 
-static int ql_read_flash_word(struct ql_adapter *qdev, int offset, u32 *data)
+static int ql_read_flash_word(struct ql_adapter *qdev, int offset, __le32 *data)
 {
 	int status = 0;
 	/* wait for reg to come ready */
@@ -656,8 +656,11 @@ static int ql_read_flash_word(struct ql_adapter *qdev, int offset, u32 *data)
 			FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR);
 	if (status)
 		goto exit;
-	/* get the data */
-	*data = ql_read32(qdev, FLASH_DATA);
+	 /* This data is stored on flash as an array of
+	 * __le32.  Since ql_read32() returns cpu endian
+	 * we need to swap it back.
+	 */
+	*data = cpu_to_le32(ql_read32(qdev, FLASH_DATA));
 exit:
 	return status;
 }
@@ -666,13 +669,20 @@ static int ql_get_flash_params(struct ql_adapter *qdev)
 {
 	int i;
 	int status;
-	u32 *p = (u32 *)&qdev->flash;
+	__le32 *p = (__le32 *)&qdev->flash;
+	u32 offset = 0;
+
+	/* Second function's parameters follow the first
+	 * function's.
+	 */
+	if (qdev->func)
+		offset = sizeof(qdev->flash) / sizeof(u32);
 
 	if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
 		return -ETIMEDOUT;
 
 	for (i = 0; i < sizeof(qdev->flash) / sizeof(u32); i++, p++) {
-		status = ql_read_flash_word(qdev, i, p);
+		status = ql_read_flash_word(qdev, i+offset, p);
 		if (status) {
 			QPRINTK(qdev, IFUP, ERR, "Error reading flash.\n");
 			goto exit;
@@ -3826,7 +3836,7 @@ static int qlge_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct net_device *ndev = pci_get_drvdata(pdev);
 	struct ql_adapter *qdev = netdev_priv(ndev);
-	int err;
+	int err, i;
 
 	netif_device_detach(ndev);
 
@@ -3836,6 +3846,9 @@ static int qlge_suspend(struct pci_dev *pdev, pm_message_t state)
 			return err;
 	}
 
+	for (i = qdev->rss_ring_first_cq_id; i < qdev->rx_ring_count; i++)
+		netif_napi_del(&qdev->rx_ring[i].napi);
+
 	err = pci_save_state(pdev);
 	if (err)
 		return err;
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 72fd9e97c19..b2dcdb5ed8b 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -438,7 +438,6 @@ static void r6040_down(struct net_device *dev)
 {
 	struct r6040_private *lp = netdev_priv(dev);
 	void __iomem *ioaddr = lp->base;
-	struct pci_dev *pdev = lp->pdev;
 	int limit = 2048;
 	u16 *adrp;
 	u16 cmd;
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 7673fd92eaf..ab0e09bf154 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -676,9 +676,8 @@ static int efx_init_port(struct efx_nic *efx)
 	rc = efx->phy_op->init(efx);
 	if (rc)
 		return rc;
-	efx->phy_op->reconfigure(efx);
-
 	mutex_lock(&efx->mac_lock);
+	efx->phy_op->reconfigure(efx);
 	rc = falcon_switch_mac(efx);
 	mutex_unlock(&efx->mac_lock);
 	if (rc)
@@ -686,7 +685,7 @@ static int efx_init_port(struct efx_nic *efx)
 	efx->mac_op->reconfigure(efx);
 
 	efx->port_initialized = true;
-	efx->stats_enabled = true;
+	efx_stats_enable(efx);
 	return 0;
 
 fail:
@@ -735,6 +734,7 @@ static void efx_fini_port(struct efx_nic *efx)
 	if (!efx->port_initialized)
 		return;
 
+	efx_stats_disable(efx);
 	efx->phy_op->fini(efx);
 	efx->port_initialized = false;
 
@@ -1361,6 +1361,20 @@ static int efx_net_stop(struct net_device *net_dev)
 	return 0;
 }
 
+void efx_stats_disable(struct efx_nic *efx)
+{
+	spin_lock(&efx->stats_lock);
+	++efx->stats_disable_count;
+	spin_unlock(&efx->stats_lock);
+}
+
+void efx_stats_enable(struct efx_nic *efx)
+{
+	spin_lock(&efx->stats_lock);
+	--efx->stats_disable_count;
+	spin_unlock(&efx->stats_lock);
+}
+
 /* Context: process, dev_base_lock or RTNL held, non-blocking. */
 static struct net_device_stats *efx_net_stats(struct net_device *net_dev)
 {
@@ -1369,12 +1383,12 @@ static struct net_device_stats *efx_net_stats(struct net_device *net_dev)
 	struct net_device_stats *stats = &net_dev->stats;
 
 	/* Update stats if possible, but do not wait if another thread
-	 * is updating them (or resetting the NIC); slightly stale
-	 * stats are acceptable.
+	 * is updating them or if MAC stats fetches are temporarily
+	 * disabled; slightly stale stats are acceptable.
 	 */
 	if (!spin_trylock(&efx->stats_lock))
 		return stats;
-	if (efx->stats_enabled) {
+	if (!efx->stats_disable_count) {
 		efx->mac_op->update_stats(efx);
 		falcon_update_nic_stats(efx);
 	}
@@ -1622,16 +1636,12 @@ static void efx_unregister_netdev(struct efx_nic *efx)
 
 /* Tears down the entire software state and most of the hardware state
  * before reset.  */
-void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+void efx_reset_down(struct efx_nic *efx, enum reset_type method,
+		    struct ethtool_cmd *ecmd)
 {
 	EFX_ASSERT_RESET_SERIALISED(efx);
 
-	/* The net_dev->get_stats handler is quite slow, and will fail
-	 * if a fetch is pending over reset. Serialise against it. */
-	spin_lock(&efx->stats_lock);
-	efx->stats_enabled = false;
-	spin_unlock(&efx->stats_lock);
-
+	efx_stats_disable(efx);
 	efx_stop_all(efx);
 	mutex_lock(&efx->mac_lock);
 	mutex_lock(&efx->spi_lock);
@@ -1639,6 +1649,8 @@ void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 	efx->phy_op->get_settings(efx, ecmd);
 
 	efx_fini_channels(efx);
+	if (efx->port_initialized && method != RESET_TYPE_INVISIBLE)
+		efx->phy_op->fini(efx);
 }
 
 /* This function will always ensure that the locks acquired in
@@ -1646,7 +1658,8 @@ void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd)
  * that we were unable to reinitialise the hardware, and the
  * driver should be disabled. If ok is false, then the rx and tx
  * engines are not restarted, pending a RESET_DISABLE. */
-int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok)
+int efx_reset_up(struct efx_nic *efx, enum reset_type method,
+		 struct ethtool_cmd *ecmd, bool ok)
 {
 	int rc;
 
@@ -1658,6 +1671,15 @@ int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok)
 		ok = false;
 	}
 
+	if (efx->port_initialized && method != RESET_TYPE_INVISIBLE) {
+		if (ok) {
+			rc = efx->phy_op->init(efx);
+			if (rc)
+				ok = false;
+		} else
+			efx->port_initialized = false;
+	}
+
 	if (ok) {
 		efx_init_channels(efx);
 
@@ -1670,7 +1692,7 @@ int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok)
 
 	if (ok) {
 		efx_start_all(efx);
-		efx->stats_enabled = true;
+		efx_stats_enable(efx);
 	}
 	return rc;
 }
@@ -1702,7 +1724,7 @@ static int efx_reset(struct efx_nic *efx)
 
 	EFX_INFO(efx, "resetting (%d)\n", method);
 
-	efx_reset_down(efx, &ecmd);
+	efx_reset_down(efx, method, &ecmd);
 
 	rc = falcon_reset_hw(efx, method);
 	if (rc) {
@@ -1721,10 +1743,10 @@ static int efx_reset(struct efx_nic *efx)
 
 	/* Leave device stopped if necessary */
 	if (method == RESET_TYPE_DISABLE) {
-		efx_reset_up(efx, &ecmd, false);
+		efx_reset_up(efx, method, &ecmd, false);
 		rc = -EIO;
 	} else {
-		rc = efx_reset_up(efx, &ecmd, true);
+		rc = efx_reset_up(efx, method, &ecmd, true);
 	}
 
 out_disable:
@@ -1876,6 +1898,7 @@ static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type,
 	efx->rx_checksum_enabled = true;
 	spin_lock_init(&efx->netif_stop_lock);
 	spin_lock_init(&efx->stats_lock);
+	efx->stats_disable_count = 1;
 	mutex_init(&efx->mac_lock);
 	efx->mac_op = &efx_dummy_mac_operations;
 	efx->phy_op = &efx_dummy_phy_operations;
diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h
index 0dd7a532c78..55d0f131b0e 100644
--- a/drivers/net/sfc/efx.h
+++ b/drivers/net/sfc/efx.h
@@ -36,13 +36,16 @@ extern void efx_process_channel_now(struct efx_channel *channel);
 extern void efx_flush_queues(struct efx_nic *efx);
 
 /* Ports */
+extern void efx_stats_disable(struct efx_nic *efx);
+extern void efx_stats_enable(struct efx_nic *efx);
 extern void efx_reconfigure_port(struct efx_nic *efx);
 extern void __efx_reconfigure_port(struct efx_nic *efx);
 
 /* Reset handling */
-extern void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd);
-extern int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd,
-			bool ok);
+extern void efx_reset_down(struct efx_nic *efx, enum reset_type method,
+			   struct ethtool_cmd *ecmd);
+extern int efx_reset_up(struct efx_nic *efx, enum reset_type method,
+			struct ethtool_cmd *ecmd, bool ok);
 
 /* Global */
 extern void efx_schedule_reset(struct efx_nic *efx, enum reset_type type);
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index 53d259e9018..7b5924c039b 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -219,9 +219,6 @@ int efx_ethtool_set_settings(struct net_device *net_dev,
 	struct efx_nic *efx = netdev_priv(net_dev);
 	int rc;
 
-	if (EFX_WORKAROUND_13963(efx) && !ecmd->autoneg)
-		return -EINVAL;
-
 	/* Falcon GMAC does not support 1000Mbps HD */
 	if (ecmd->speed == SPEED_1000 && ecmd->duplex != DUPLEX_FULL) {
 		EFX_LOG(efx, "rejecting unsupported 1000Mbps HD"
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index 5b9f2d9cc4e..d5378e60fcd 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -824,10 +824,6 @@ static void falcon_handle_rx_not_ok(struct efx_rx_queue *rx_queue,
 			    rx_ev_pause_frm ? " [PAUSE]" : "");
 	}
 #endif
-
-	if (unlikely(rx_ev_eth_crc_err && EFX_WORKAROUND_10750(efx) &&
-		     efx->phy_type == PHY_TYPE_SFX7101))
-		tenxpress_crc_err(efx);
 }
 
 /* Handle receive events that are not in-order. */
@@ -1887,7 +1883,7 @@ static int falcon_reset_macs(struct efx_nic *efx)
 
 	/* MAC stats will fail whilst the TX fifo is draining. Serialise
 	 * the drain sequence with the statistics fetch */
-	spin_lock(&efx->stats_lock);
+	efx_stats_disable(efx);
 
 	falcon_read(efx, &reg, MAC0_CTRL_REG_KER);
 	EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0, 1);
@@ -1917,7 +1913,7 @@ static int falcon_reset_macs(struct efx_nic *efx)
 		udelay(10);
 	}
 
-	spin_unlock(&efx->stats_lock);
+	efx_stats_enable(efx);
 
 	/* If we've reset the EM block and the link is up, then
 	 * we'll have to kick the XAUI link so the PHY can recover */
@@ -2277,6 +2273,10 @@ int falcon_switch_mac(struct efx_nic *efx)
 	struct efx_mac_operations *old_mac_op = efx->mac_op;
 	efx_oword_t nic_stat;
 	unsigned strap_val;
+	int rc = 0;
+
+	/* Don't try to fetch MAC stats while we're switching MACs */
+	efx_stats_disable(efx);
 
 	/* Internal loopbacks override the phy speed setting */
 	if (efx->loopback_mode == LOOPBACK_GMAC) {
@@ -2287,16 +2287,12 @@ int falcon_switch_mac(struct efx_nic *efx)
 		efx->link_fd = true;
 	}
 
+	WARN_ON(!mutex_is_locked(&efx->mac_lock));
 	efx->mac_op = (EFX_IS10G(efx) ?
 		       &falcon_xmac_operations : &falcon_gmac_operations);
-	if (old_mac_op == efx->mac_op)
-		return 0;
-
-	WARN_ON(!mutex_is_locked(&efx->mac_lock));
-
-	/* Not all macs support a mac-level link state */
-	efx->mac_up = true;
 
+	/* Always push the NIC_STAT_REG setting even if the mac hasn't
+	 * changed, because this function is run post online reset */
 	falcon_read(efx, &nic_stat, NIC_STAT_REG);
 	strap_val = EFX_IS10G(efx) ? 5 : 3;
 	if (falcon_rev(efx) >= FALCON_REV_B0) {
@@ -2309,9 +2305,17 @@ int falcon_switch_mac(struct efx_nic *efx)
 		BUG_ON(EFX_OWORD_FIELD(nic_stat, STRAP_PINS) != strap_val);
 	}
 
+	if (old_mac_op == efx->mac_op)
+		goto out;
 
 	EFX_LOG(efx, "selected %cMAC\n", EFX_IS10G(efx) ? 'X' : 'G');
-	return falcon_reset_macs(efx);
+	/* Not all macs support a mac-level link state */
+	efx->mac_up = true;
+
+	rc = falcon_reset_macs(efx);
+out:
+	efx_stats_enable(efx);
+	return rc;
 }
 
 /* This call is responsible for hooking in the MAC and PHY operations */
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index f6a16428113..f9e2f95c3b4 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -15,6 +15,7 @@
 #include "net_driver.h"
 #include "mdio_10g.h"
 #include "boards.h"
+#include "workarounds.h"
 
 int mdio_clause45_reset_mmd(struct efx_nic *port, int mmd,
 			    int spins, int spintime)
@@ -179,17 +180,12 @@ bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask)
 		return false;
 	else if (efx_phy_mode_disabled(efx->phy_mode))
 		return false;
-	else if (efx->loopback_mode == LOOPBACK_PHYXS) {
+	else if (efx->loopback_mode == LOOPBACK_PHYXS)
 		mmd_mask &= ~(MDIO_MMDREG_DEVS_PHYXS |
 			      MDIO_MMDREG_DEVS_PCS |
 			      MDIO_MMDREG_DEVS_PMAPMD |
 			      MDIO_MMDREG_DEVS_AN);
-		if (!mmd_mask) {
-			reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS,
-						 MDIO_PHYXS_STATUS2);
-			return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN));
-		}
-	} else if (efx->loopback_mode == LOOPBACK_PCS)
+	else if (efx->loopback_mode == LOOPBACK_PCS)
 		mmd_mask &= ~(MDIO_MMDREG_DEVS_PCS |
 			      MDIO_MMDREG_DEVS_PMAPMD |
 			      MDIO_MMDREG_DEVS_AN);
@@ -197,6 +193,13 @@ bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask)
 		mmd_mask &= ~(MDIO_MMDREG_DEVS_PMAPMD |
 			      MDIO_MMDREG_DEVS_AN);
 
+	if (!mmd_mask) {
+		/* Use presence of XGMII faults in leui of link state */
+		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS,
+					 MDIO_PHYXS_STATUS2);
+		return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN));
+	}
+
 	while (mmd_mask) {
 		if (mmd_mask & 1) {
 			/* Double reads because link state is latched, and a
@@ -263,7 +266,7 @@ void mdio_clause45_set_mmds_lpower(struct efx_nic *efx,
 	}
 }
 
-static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp)
+static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr)
 {
 	int phy_id = efx->mii.phy_id;
 	u32 result = 0;
@@ -278,9 +281,6 @@ static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp)
 		result |= ADVERTISED_100baseT_Half;
 	if (reg & ADVERTISE_100FULL)
 		result |= ADVERTISED_100baseT_Full;
-	if (reg & LPA_RESV)
-		result |= xnp;
-
 	return result;
 }
 
@@ -310,7 +310,7 @@ void mdio_clause45_get_settings(struct efx_nic *efx,
  */
 void mdio_clause45_get_settings_ext(struct efx_nic *efx,
 				    struct ethtool_cmd *ecmd,
-				    u32 xnp, u32 xnp_lpa)
+				    u32 npage_adv, u32 npage_lpa)
 {
 	int phy_id = efx->mii.phy_id;
 	int reg;
@@ -361,8 +361,8 @@ void mdio_clause45_get_settings_ext(struct efx_nic *efx,
 			ecmd->autoneg = AUTONEG_ENABLE;
 			ecmd->advertising |=
 				ADVERTISED_Autoneg |
-				mdio_clause45_get_an(efx,
-						     MDIO_AN_ADVERTISE, xnp);
+				mdio_clause45_get_an(efx, MDIO_AN_ADVERTISE) |
+				npage_adv;
 		} else
 			ecmd->autoneg = AUTONEG_DISABLE;
 	} else
@@ -371,27 +371,30 @@ void mdio_clause45_get_settings_ext(struct efx_nic *efx,
 	if (ecmd->autoneg) {
 		/* If AN is complete, report best common mode,
 		 * otherwise report best advertised mode. */
-		u32 common = ecmd->advertising;
+		u32 modes = 0;
 		if (mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
 				       MDIO_MMDREG_STAT1) &
-		    (1 << MDIO_AN_STATUS_AN_DONE_LBN)) {
-			common &= mdio_clause45_get_an(efx, MDIO_AN_LPA,
-						       xnp_lpa);
-		}
-		if (common & ADVERTISED_10000baseT_Full) {
+		    (1 << MDIO_AN_STATUS_AN_DONE_LBN))
+			modes = (ecmd->advertising &
+				 (mdio_clause45_get_an(efx, MDIO_AN_LPA) |
+				  npage_lpa));
+		if (modes == 0)
+			modes = ecmd->advertising;
+
+		if (modes & ADVERTISED_10000baseT_Full) {
 			ecmd->speed = SPEED_10000;
 			ecmd->duplex = DUPLEX_FULL;
-		} else if (common & (ADVERTISED_1000baseT_Full |
-				     ADVERTISED_1000baseT_Half)) {
+		} else if (modes & (ADVERTISED_1000baseT_Full |
+				    ADVERTISED_1000baseT_Half)) {
 			ecmd->speed = SPEED_1000;
-			ecmd->duplex = !!(common & ADVERTISED_1000baseT_Full);
-		} else if (common & (ADVERTISED_100baseT_Full |
-				     ADVERTISED_100baseT_Half)) {
+			ecmd->duplex = !!(modes & ADVERTISED_1000baseT_Full);
+		} else if (modes & (ADVERTISED_100baseT_Full |
+				    ADVERTISED_100baseT_Half)) {
 			ecmd->speed = SPEED_100;
-			ecmd->duplex = !!(common & ADVERTISED_100baseT_Full);
+			ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full);
 		} else {
 			ecmd->speed = SPEED_10;
-			ecmd->duplex = !!(common & ADVERTISED_10baseT_Full);
+			ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full);
 		}
 	} else {
 		/* Report forced settings */
@@ -415,7 +418,7 @@ int mdio_clause45_set_settings(struct efx_nic *efx,
 	int phy_id = efx->mii.phy_id;
 	struct ethtool_cmd prev;
 	u32 required;
-	int ctrl1_bits, reg;
+	int reg;
 
 	efx->phy_op->get_settings(efx, &prev);
 
@@ -430,99 +433,83 @@ int mdio_clause45_set_settings(struct efx_nic *efx,
 	if (prev.port != PORT_TP || ecmd->port != PORT_TP)
 		return -EINVAL;
 
-	/* Check that PHY supports these settings and work out the
-	 * basic control bits */
-	if (ecmd->duplex) {
+	/* Check that PHY supports these settings */
+	if (ecmd->autoneg) {
+		required = SUPPORTED_Autoneg;
+	} else if (ecmd->duplex) {
 		switch (ecmd->speed) {
-		case SPEED_10:
-			ctrl1_bits = BMCR_FULLDPLX;
-			required = SUPPORTED_10baseT_Full;
-			break;
-		case SPEED_100:
-			ctrl1_bits = BMCR_SPEED100 | BMCR_FULLDPLX;
-			required = SUPPORTED_100baseT_Full;
-			break;
-		case SPEED_1000:
-			ctrl1_bits = BMCR_SPEED1000 | BMCR_FULLDPLX;
-			required = SUPPORTED_1000baseT_Full;
-			break;
-		case SPEED_10000:
-			ctrl1_bits = (BMCR_SPEED1000 | BMCR_SPEED100 |
-				      BMCR_FULLDPLX);
-			required = SUPPORTED_10000baseT_Full;
-			break;
-		default:
-			return -EINVAL;
+		case SPEED_10:  required = SUPPORTED_10baseT_Full;  break;
+		case SPEED_100: required = SUPPORTED_100baseT_Full; break;
+		default:        return -EINVAL;
 		}
 	} else {
 		switch (ecmd->speed) {
-		case SPEED_10:
-			ctrl1_bits = 0;
-			required = SUPPORTED_10baseT_Half;
-			break;
-		case SPEED_100:
-			ctrl1_bits = BMCR_SPEED100;
-			required = SUPPORTED_100baseT_Half;
-			break;
-		case SPEED_1000:
-			ctrl1_bits = BMCR_SPEED1000;
-			required = SUPPORTED_1000baseT_Half;
-			break;
-		default:
-			return -EINVAL;
+		case SPEED_10:  required = SUPPORTED_10baseT_Half;  break;
+		case SPEED_100: required = SUPPORTED_100baseT_Half; break;
+		default:        return -EINVAL;
 		}
 	}
-	if (ecmd->autoneg)
-		required |= SUPPORTED_Autoneg;
 	required |= ecmd->advertising;
 	if (required & ~prev.supported)
 		return -EINVAL;
 
-	/* Set the basic control bits */
-	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-				 MDIO_MMDREG_CTRL1);
-	reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | 0x003c);
-	reg |= ctrl1_bits;
-	mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, MDIO_MMDREG_CTRL1,
-			    reg);
-
-	/* Set the AN registers */
-	if (ecmd->autoneg != prev.autoneg ||
-	    ecmd->advertising != prev.advertising) {
-		bool xnp = false;
-
-		if (efx->phy_op->set_xnp_advertise)
-			xnp = efx->phy_op->set_xnp_advertise(efx,
-							     ecmd->advertising);
-
-		if (ecmd->autoneg) {
-			reg = 0;
-			if (ecmd->advertising & ADVERTISED_10baseT_Half)
-				reg |= ADVERTISE_10HALF;
-			if (ecmd->advertising & ADVERTISED_10baseT_Full)
-				reg |= ADVERTISE_10FULL;
-			if (ecmd->advertising & ADVERTISED_100baseT_Half)
-				reg |= ADVERTISE_100HALF;
-			if (ecmd->advertising & ADVERTISED_100baseT_Full)
-				reg |= ADVERTISE_100FULL;
-			if (xnp)
-				reg |= ADVERTISE_RESV;
-			mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
-					    MDIO_AN_ADVERTISE, reg);
-		}
+	if (ecmd->autoneg) {
+		bool xnp = (ecmd->advertising & ADVERTISED_10000baseT_Full
+			    || EFX_WORKAROUND_13204(efx));
+
+		/* Set up the base page */
+		reg = ADVERTISE_CSMA;
+		if (ecmd->advertising & ADVERTISED_10baseT_Half)
+			reg |= ADVERTISE_10HALF;
+		if (ecmd->advertising & ADVERTISED_10baseT_Full)
+			reg |= ADVERTISE_10FULL;
+		if (ecmd->advertising & ADVERTISED_100baseT_Half)
+			reg |= ADVERTISE_100HALF;
+		if (ecmd->advertising & ADVERTISED_100baseT_Full)
+			reg |= ADVERTISE_100FULL;
+		if (xnp)
+			reg |= ADVERTISE_RESV;
+		else if (ecmd->advertising & (ADVERTISED_1000baseT_Half |
+					      ADVERTISED_1000baseT_Full))
+			reg |= ADVERTISE_NPAGE;
+		reg |= efx_fc_advertise(efx->wanted_fc);
+		mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
+				    MDIO_AN_ADVERTISE, reg);
+
+		/* Set up the (extended) next page if necessary */
+		if (efx->phy_op->set_npage_adv)
+			efx->phy_op->set_npage_adv(efx, ecmd->advertising);
 
+		/* Enable and restart AN */
 		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
 					 MDIO_MMDREG_CTRL1);
-		if (ecmd->autoneg)
-			reg |= BMCR_ANENABLE | BMCR_ANRESTART;
-		else
-			reg &= ~BMCR_ANENABLE;
+		reg |= BMCR_ANENABLE;
+		if (!(EFX_WORKAROUND_15195(efx) &&
+		      LOOPBACK_MASK(efx) & efx->phy_op->loopbacks))
+			reg |= BMCR_ANRESTART;
 		if (xnp)
 			reg |= 1 << MDIO_AN_CTRL_XNP_LBN;
 		else
 			reg &= ~(1 << MDIO_AN_CTRL_XNP_LBN);
 		mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
 				    MDIO_MMDREG_CTRL1, reg);
+	} else {
+		/* Disable AN */
+		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN,
+				       MDIO_MMDREG_CTRL1,
+				       __ffs(BMCR_ANENABLE), false);
+
+		/* Set the basic control bits */
+		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
+					 MDIO_MMDREG_CTRL1);
+		reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX |
+			 0x003c);
+		if (ecmd->speed == SPEED_100)
+			reg |= BMCR_SPEED100;
+		if (ecmd->duplex)
+			reg |= BMCR_FULLDPLX;
+		mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
+				    MDIO_MMDREG_CTRL1, reg);
 	}
 
 	return 0;
diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h
index 09bf801d056..8ba49773ce7 100644
--- a/drivers/net/sfc/mdio_10g.h
+++ b/drivers/net/sfc/mdio_10g.h
@@ -155,7 +155,8 @@
 #define MDIO_AN_XNP			22
 #define MDIO_AN_LPA_XNP			25
 
-#define MDIO_AN_10GBT_ADVERTISE		32
+#define MDIO_AN_10GBT_CTRL		32
+#define MDIO_AN_10GBT_CTRL_ADV_10G_LBN	12
 #define MDIO_AN_10GBT_STATUS		(33)
 #define MDIO_AN_10GBT_STATUS_MS_FLT_LBN (15) /* MASTER/SLAVE config fault */
 #define MDIO_AN_10GBT_STATUS_MS_LBN     (14) /* MASTER/SLAVE config */
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 5f255f75754..e019ad1fb9a 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -566,7 +566,7 @@ struct efx_mac_operations {
  * @poll: Poll for hardware state. Serialised by the mac_lock.
  * @get_settings: Get ethtool settings. Serialised by the mac_lock.
  * @set_settings: Set ethtool settings. Serialised by the mac_lock.
- * @set_xnp_advertise: Set abilities advertised in Extended Next Page
+ * @set_npage_adv: Set abilities advertised in (Extended) Next Page
  *	(only needed where AN bit is set in mmds)
  * @num_tests: Number of PHY-specific tests/results
  * @test_names: Names of the tests/results
@@ -586,7 +586,7 @@ struct efx_phy_operations {
 			      struct ethtool_cmd *ecmd);
 	int (*set_settings) (struct efx_nic *efx,
 			     struct ethtool_cmd *ecmd);
-	bool (*set_xnp_advertise) (struct efx_nic *efx, u32);
+	void (*set_npage_adv) (struct efx_nic *efx, u32);
 	u32 num_tests;
 	const char *const *test_names;
 	int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags);
@@ -754,8 +754,7 @@ union efx_multicast_hash {
  *	&struct net_device_stats.
  * @stats_buffer: DMA buffer for statistics
  * @stats_lock: Statistics update lock. Serialises statistics fetches
- * @stats_enabled: Temporarily disable statistics fetches.
- *	Serialised by @stats_lock
+ * @stats_disable_count: Nest count for disabling statistics fetches
  * @mac_op: MAC interface
  * @mac_address: Permanent MAC address
  * @phy_type: PHY type
@@ -837,7 +836,7 @@ struct efx_nic {
 	struct efx_mac_stats mac_stats;
 	struct efx_buffer stats_buffer;
 	spinlock_t stats_lock;
-	bool stats_enabled;
+	unsigned int stats_disable_count;
 
 	struct efx_mac_operations *mac_op;
 	unsigned char mac_address[ETH_ALEN];
diff --git a/drivers/net/sfc/phy.h b/drivers/net/sfc/phy.h
index 58c493ef81b..07e855c148b 100644
--- a/drivers/net/sfc/phy.h
+++ b/drivers/net/sfc/phy.h
@@ -17,7 +17,6 @@ extern struct efx_phy_operations falcon_sfx7101_phy_ops;
 extern struct efx_phy_operations falcon_sft9001_phy_ops;
 
 extern void tenxpress_phy_blink(struct efx_nic *efx, bool blink);
-extern void tenxpress_crc_err(struct efx_nic *efx);
 
 /****************************************************************************
  * Exported functions from the driver for XFP optical PHYs
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index dba0d64d50c..0a598084c51 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -665,6 +665,7 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests,
 {
 	enum efx_loopback_mode loopback_mode = efx->loopback_mode;
 	int phy_mode = efx->phy_mode;
+	enum reset_type reset_method = RESET_TYPE_INVISIBLE;
 	struct ethtool_cmd ecmd;
 	struct efx_channel *channel;
 	int rc_test = 0, rc_reset = 0, rc;
@@ -718,21 +719,21 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests,
 	mutex_unlock(&efx->mac_lock);
 
 	/* free up all consumers of SRAM (including all the queues) */
-	efx_reset_down(efx, &ecmd);
+	efx_reset_down(efx, reset_method, &ecmd);
 
 	rc = efx_test_chip(efx, tests);
 	if (rc && !rc_test)
 		rc_test = rc;
 
 	/* reset the chip to recover from the register test */
-	rc_reset = falcon_reset_hw(efx, RESET_TYPE_ALL);
+	rc_reset = falcon_reset_hw(efx, reset_method);
 
 	/* Ensure that the phy is powered and out of loopback
 	 * for the bist and loopback tests */
 	efx->phy_mode &= ~PHY_MODE_LOW_POWER;
 	efx->loopback_mode = LOOPBACK_NONE;
 
-	rc = efx_reset_up(efx, &ecmd, rc_reset == 0);
+	rc = efx_reset_up(efx, reset_method, &ecmd, rc_reset == 0);
 	if (rc && !rc_reset)
 		rc_reset = rc;
 
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
index 16b80acb999..cb25ae5b257 100644
--- a/drivers/net/sfc/sfe4001.c
+++ b/drivers/net/sfc/sfe4001.c
@@ -186,19 +186,22 @@ static int sfn4111t_reset(struct efx_nic *efx)
 {
 	efx_oword_t reg;
 
-	/* GPIO pins are also used for I2C, so block that temporarily */
+	/* GPIO 3 and the GPIO register are shared with I2C, so block that */
 	mutex_lock(&efx->i2c_adap.bus_lock);
 
+	/* Pull RST_N (GPIO 2) low then let it up again, setting the
+	 * FLASH_CFG_1 strap (GPIO 3) appropriately.  Only change the
+	 * output enables; the output levels should always be 0 (low)
+	 * and we rely on external pull-ups. */
 	falcon_read(efx, &reg, GPIO_CTL_REG_KER);
 	EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, true);
-	EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, false);
 	falcon_write(efx, &reg, GPIO_CTL_REG_KER);
 	msleep(1000);
-	EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, true);
-	EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, true);
-	EFX_SET_OWORD_FIELD(reg, GPIO3_OUT,
-			    !(efx->phy_mode & PHY_MODE_SPECIAL));
+	EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, false);
+	EFX_SET_OWORD_FIELD(reg, GPIO3_OEN,
+			    !!(efx->phy_mode & PHY_MODE_SPECIAL));
 	falcon_write(efx, &reg, GPIO_CTL_REG_KER);
+	msleep(1);
 
 	mutex_unlock(&efx->i2c_adap.bus_lock);
 
@@ -232,12 +235,18 @@ static ssize_t set_phy_flash_cfg(struct device *dev,
 	} else if (efx->state != STATE_RUNNING || netif_running(efx->net_dev)) {
 		err = -EBUSY;
 	} else {
+		/* Reset the PHY, reconfigure the MAC and enable/disable
+		 * MAC stats accordingly. */
 		efx->phy_mode = new_mode;
+		if (new_mode & PHY_MODE_SPECIAL)
+			efx_stats_disable(efx);
 		if (efx->board_info.type == EFX_BOARD_SFE4001)
 			err = sfe4001_poweron(efx);
 		else
 			err = sfn4111t_reset(efx);
 		efx_reconfigure_port(efx);
+		if (!(new_mode & PHY_MODE_SPECIAL))
+			efx_stats_enable(efx);
 	}
 	rtnl_unlock();
 
@@ -326,6 +335,11 @@ int sfe4001_init(struct efx_nic *efx)
 	efx->board_info.monitor = sfe4001_check_hw;
 	efx->board_info.fini = sfe4001_fini;
 
+	if (efx->phy_mode & PHY_MODE_SPECIAL) {
+		/* PHY won't generate a 156.25 MHz clock and MAC stats fetch
+		 * will fail. */
+		efx_stats_disable(efx);
+	}
 	rc = sfe4001_poweron(efx);
 	if (rc)
 		goto fail_ioexp;
@@ -372,17 +386,25 @@ static void sfn4111t_fini(struct efx_nic *efx)
 	i2c_unregister_device(efx->board_info.hwmon_client);
 }
 
-static struct i2c_board_info sfn4111t_hwmon_info = {
+static struct i2c_board_info sfn4111t_a0_hwmon_info = {
 	I2C_BOARD_INFO("max6647", 0x4e),
 	.irq		= -1,
 };
 
+static struct i2c_board_info sfn4111t_r5_hwmon_info = {
+	I2C_BOARD_INFO("max6646", 0x4d),
+	.irq		= -1,
+};
+
 int sfn4111t_init(struct efx_nic *efx)
 {
 	int rc;
 
 	efx->board_info.hwmon_client =
-		i2c_new_device(&efx->i2c_adap, &sfn4111t_hwmon_info);
+		i2c_new_device(&efx->i2c_adap,
+			       (efx->board_info.minor < 5) ?
+			       &sfn4111t_a0_hwmon_info :
+			       &sfn4111t_r5_hwmon_info);
 	if (!efx->board_info.hwmon_client)
 		return -EIO;
 
@@ -394,8 +416,10 @@ int sfn4111t_init(struct efx_nic *efx)
 	if (rc)
 		goto fail_hwmon;
 
-	if (efx->phy_mode & PHY_MODE_SPECIAL)
+	if (efx->phy_mode & PHY_MODE_SPECIAL) {
+		efx_stats_disable(efx);
 		sfn4111t_reset(efx);
+	}
 
 	return 0;
 
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index 9ecb77da954..f0efd246962 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -67,6 +67,8 @@
 #define PMA_PMD_EXT_CLK312_WIDTH 1
 #define PMA_PMD_EXT_LPOWER_LBN  12
 #define PMA_PMD_EXT_LPOWER_WIDTH 1
+#define PMA_PMD_EXT_ROBUST_LBN	14
+#define PMA_PMD_EXT_ROBUST_WIDTH 1
 #define PMA_PMD_EXT_SSR_LBN	15
 #define PMA_PMD_EXT_SSR_WIDTH	1
 
@@ -177,35 +179,24 @@
 #define C22EXT_STATUS_LINK_LBN  2
 #define C22EXT_STATUS_LINK_WIDTH 1
 
-#define C22EXT_MSTSLV_REG       49162
-#define C22EXT_MSTSLV_1000_HD_LBN 10
-#define C22EXT_MSTSLV_1000_HD_WIDTH 1
-#define C22EXT_MSTSLV_1000_FD_LBN 11
-#define C22EXT_MSTSLV_1000_FD_WIDTH 1
+#define C22EXT_MSTSLV_CTRL			49161
+#define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN	8
+#define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN	9
+
+#define C22EXT_MSTSLV_STATUS			49162
+#define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN	10
+#define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN	11
 
 /* Time to wait between powering down the LNPGA and turning off the power
  * rails */
 #define LNPGA_PDOWN_WAIT	(HZ / 5)
 
-static int crc_error_reset_threshold = 100;
-module_param(crc_error_reset_threshold, int, 0644);
-MODULE_PARM_DESC(crc_error_reset_threshold,
-		 "Max number of CRC errors before XAUI reset");
-
 struct tenxpress_phy_data {
 	enum efx_loopback_mode loopback_mode;
-	atomic_t bad_crc_count;
 	enum efx_phy_mode phy_mode;
 	int bad_lp_tries;
 };
 
-void tenxpress_crc_err(struct efx_nic *efx)
-{
-	struct tenxpress_phy_data *phy_data = efx->phy_data;
-	if (phy_data != NULL)
-		atomic_inc(&phy_data->bad_crc_count);
-}
-
 static ssize_t show_phy_short_reach(struct device *dev,
 				    struct device_attribute *attr, char *buf)
 {
@@ -284,7 +275,9 @@ static int tenxpress_init(struct efx_nic *efx)
 					 PMA_PMD_XCONTROL_REG);
 		reg |= ((1 << PMA_PMD_EXT_GMII_EN_LBN) |
 			(1 << PMA_PMD_EXT_CLK_OUT_LBN) |
-			(1 << PMA_PMD_EXT_CLK312_LBN));
+			(1 << PMA_PMD_EXT_CLK312_LBN) |
+			(1 << PMA_PMD_EXT_ROBUST_LBN));
+
 		mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
 				    PMA_PMD_XCONTROL_REG, reg);
 		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
@@ -346,6 +339,7 @@ static int tenxpress_phy_init(struct efx_nic *efx)
 	rc = tenxpress_init(efx);
 	if (rc < 0)
 		goto fail;
+	mdio_clause45_set_pause(efx);
 
 	if (efx->phy_type == PHY_TYPE_SFT9001B) {
 		rc = device_create_file(&efx->pci_dev->dev,
@@ -376,8 +370,8 @@ static int tenxpress_special_reset(struct efx_nic *efx)
 
 	/* The XGMAC clock is driven from the SFC7101/SFT9001 312MHz clock, so
 	 * a special software reset can glitch the XGMAC sufficiently for stats
-	 * requests to fail. Since we don't often special_reset, just lock. */
-	spin_lock(&efx->stats_lock);
+	 * requests to fail. */
+	efx_stats_disable(efx);
 
 	/* Initiate reset */
 	reg = mdio_clause45_read(efx, efx->mii.phy_id,
@@ -392,17 +386,17 @@ static int tenxpress_special_reset(struct efx_nic *efx)
 	rc = mdio_clause45_wait_reset_mmds(efx,
 					   TENXPRESS_REQUIRED_DEVS);
 	if (rc < 0)
-		goto unlock;
+		goto out;
 
 	/* Try and reconfigure the device */
 	rc = tenxpress_init(efx);
 	if (rc < 0)
-		goto unlock;
+		goto out;
 
 	/* Wait for the XGXS state machine to churn */
 	mdelay(10);
-unlock:
-	spin_unlock(&efx->stats_lock);
+out:
+	efx_stats_enable(efx);
 	return rc;
 }
 
@@ -520,7 +514,7 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx)
 {
 	struct tenxpress_phy_data *phy_data = efx->phy_data;
 	struct ethtool_cmd ecmd;
-	bool phy_mode_change, loop_reset, loop_toggle, loopback;
+	bool phy_mode_change, loop_reset;
 
 	if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) {
 		phy_data->phy_mode = efx->phy_mode;
@@ -531,12 +525,10 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx)
 
 	phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL &&
 			   phy_data->phy_mode != PHY_MODE_NORMAL);
-	loopback = LOOPBACK_MASK(efx) & efx->phy_op->loopbacks;
-	loop_toggle = LOOPBACK_CHANGED(phy_data, efx, efx->phy_op->loopbacks);
 	loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, efx->phy_op->loopbacks) ||
 		      LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY));
 
-	if (loop_reset || loop_toggle || loopback || phy_mode_change) {
+	if (loop_reset || phy_mode_change) {
 		int rc;
 
 		efx->phy_op->get_settings(efx, &ecmd);
@@ -551,20 +543,6 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx)
 				falcon_reset_xaui(efx);
 		}
 
-		if (efx->phy_type != PHY_TYPE_SFX7101) {
-			/* Only change autoneg once, on coming out or
-			 * going into loopback */
-			if (loop_toggle)
-				ecmd.autoneg = !loopback;
-			if (loopback) {
-				ecmd.duplex = DUPLEX_FULL;
-				if (efx->loopback_mode == LOOPBACK_GPHY)
-					ecmd.speed = SPEED_1000;
-				else
-					ecmd.speed = SPEED_10000;
-			}
-		}
-
 		rc = efx->phy_op->set_settings(efx, &ecmd);
 		WARN_ON(rc);
 	}
@@ -623,13 +601,6 @@ static void tenxpress_phy_poll(struct efx_nic *efx)
 
 	if (phy_data->phy_mode != PHY_MODE_NORMAL)
 		return;
-
-	if (EFX_WORKAROUND_10750(efx) &&
-	    atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) {
-		EFX_ERR(efx, "Resetting XAUI due to too many CRC errors\n");
-		falcon_reset_xaui(efx);
-		atomic_set(&phy_data->bad_crc_count, 0);
-	}
 }
 
 static void tenxpress_phy_fini(struct efx_nic *efx)
@@ -772,107 +743,76 @@ reset:
 	return rc;
 }
 
-static u32 tenxpress_get_xnp_lpa(struct efx_nic *efx)
+static void
+tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
-	int phy = efx->mii.phy_id;
-	u32 lpa = 0;
+	int phy_id = efx->mii.phy_id;
+	u32 adv = 0, lpa = 0;
 	int reg;
 
 	if (efx->phy_type != PHY_TYPE_SFX7101) {
-		reg = mdio_clause45_read(efx, phy, MDIO_MMD_C22EXT,
-					 C22EXT_MSTSLV_REG);
-		if (reg & (1 << C22EXT_MSTSLV_1000_HD_LBN))
+		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
+					 C22EXT_MSTSLV_CTRL);
+		if (reg & (1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN))
+			adv |= ADVERTISED_1000baseT_Full;
+		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
+					 C22EXT_MSTSLV_STATUS);
+		if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN))
 			lpa |= ADVERTISED_1000baseT_Half;
-		if (reg & (1 << C22EXT_MSTSLV_1000_FD_LBN))
+		if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN))
 			lpa |= ADVERTISED_1000baseT_Full;
 	}
-	reg = mdio_clause45_read(efx, phy, MDIO_MMD_AN, MDIO_AN_10GBT_STATUS);
+	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
+				 MDIO_AN_10GBT_CTRL);
+	if (reg & (1 << MDIO_AN_10GBT_CTRL_ADV_10G_LBN))
+		adv |= ADVERTISED_10000baseT_Full;
+	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
+				 MDIO_AN_10GBT_STATUS);
 	if (reg & (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN))
 		lpa |= ADVERTISED_10000baseT_Full;
-	return lpa;
-}
 
-static void sfx7101_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
-{
-	mdio_clause45_get_settings_ext(efx, ecmd, ADVERTISED_10000baseT_Full,
-				       tenxpress_get_xnp_lpa(efx));
-	ecmd->supported |= SUPPORTED_10000baseT_Full;
-	ecmd->advertising |= ADVERTISED_10000baseT_Full;
+	mdio_clause45_get_settings_ext(efx, ecmd, adv, lpa);
+
+	if (efx->phy_type != PHY_TYPE_SFX7101)
+		ecmd->supported |= (SUPPORTED_100baseT_Full |
+				    SUPPORTED_1000baseT_Full);
+
+	/* In loopback, the PHY automatically brings up the correct interface,
+	 * but doesn't advertise the correct speed. So override it */
+	if (efx->loopback_mode == LOOPBACK_GPHY)
+		ecmd->speed = SPEED_1000;
+	else if (LOOPBACK_MASK(efx) & efx->phy_op->loopbacks)
+		ecmd->speed = SPEED_10000;
 }
 
-static void sft9001_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
-	int phy_id = efx->mii.phy_id;
-	u32 xnp_adv = 0;
-	int reg;
-
-	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-				 PMA_PMD_SPEED_ENABLE_REG);
-	if (EFX_WORKAROUND_13204(efx) && (reg & (1 << PMA_PMD_100TX_ADV_LBN)))
-		xnp_adv |= ADVERTISED_100baseT_Full;
-	if (reg & (1 << PMA_PMD_1000T_ADV_LBN))
-		xnp_adv |= ADVERTISED_1000baseT_Full;
-	if (reg & (1 << PMA_PMD_10000T_ADV_LBN))
-		xnp_adv |= ADVERTISED_10000baseT_Full;
-
-	mdio_clause45_get_settings_ext(efx, ecmd, xnp_adv,
-				       tenxpress_get_xnp_lpa(efx));
-
-	ecmd->supported |= (SUPPORTED_100baseT_Half |
-			    SUPPORTED_100baseT_Full |
-			    SUPPORTED_1000baseT_Full);
+	if (!ecmd->autoneg)
+		return -EINVAL;
 
-	/* Use the vendor defined C22ext register for duplex settings */
-	if (ecmd->speed != SPEED_10000 && !ecmd->autoneg) {
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
-					 GPHY_XCONTROL_REG);
-		ecmd->duplex = (reg & (1 << GPHY_DUPLEX_LBN) ?
-				DUPLEX_FULL : DUPLEX_HALF);
-	}
+	return mdio_clause45_set_settings(efx, ecmd);
 }
 
-static int sft9001_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising)
 {
-	int phy_id = efx->mii.phy_id;
-	int rc;
-
-	rc = mdio_clause45_set_settings(efx, ecmd);
-	if (rc)
-		return rc;
-
-	if (ecmd->speed != SPEED_10000 && !ecmd->autoneg)
-		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
-				       GPHY_XCONTROL_REG, GPHY_DUPLEX_LBN,
-				       ecmd->duplex == DUPLEX_FULL);
-
-	return rc;
+	mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_AN,
+			       MDIO_AN_10GBT_CTRL,
+			       MDIO_AN_10GBT_CTRL_ADV_10G_LBN,
+			       advertising & ADVERTISED_10000baseT_Full);
 }
 
-static bool sft9001_set_xnp_advertise(struct efx_nic *efx, u32 advertising)
+static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising)
 {
-	int phy = efx->mii.phy_id;
-	int reg = mdio_clause45_read(efx, phy, MDIO_MMD_PMAPMD,
-				     PMA_PMD_SPEED_ENABLE_REG);
-	bool enabled;
-
-	reg &= ~((1 << 2) | (1 << 3));
-	if (EFX_WORKAROUND_13204(efx) &&
-	    (advertising & ADVERTISED_100baseT_Full))
-		reg |= 1 << PMA_PMD_100TX_ADV_LBN;
-	if (advertising & ADVERTISED_1000baseT_Full)
-		reg |= 1 << PMA_PMD_1000T_ADV_LBN;
-	if (advertising & ADVERTISED_10000baseT_Full)
-		reg |= 1 << PMA_PMD_10000T_ADV_LBN;
-	mdio_clause45_write(efx, phy, MDIO_MMD_PMAPMD,
-			    PMA_PMD_SPEED_ENABLE_REG, reg);
-
-	enabled = (advertising &
-		   (ADVERTISED_1000baseT_Half |
-		    ADVERTISED_1000baseT_Full |
-		    ADVERTISED_10000baseT_Full));
-	if (EFX_WORKAROUND_13204(efx))
-		enabled |= (advertising & ADVERTISED_100baseT_Full);
-	return enabled;
+	int phy_id = efx->mii.phy_id;
+
+	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
+			       C22EXT_MSTSLV_CTRL,
+			       C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN,
+			       advertising & ADVERTISED_1000baseT_Full);
+	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN,
+			       MDIO_AN_10GBT_CTRL,
+			       MDIO_AN_10GBT_CTRL_ADV_10G_LBN,
+			       advertising & ADVERTISED_10000baseT_Full);
 }
 
 struct efx_phy_operations falcon_sfx7101_phy_ops = {
@@ -882,8 +822,9 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = {
 	.poll             = tenxpress_phy_poll,
 	.fini             = tenxpress_phy_fini,
 	.clear_interrupt  = efx_port_dummy_op_void,
-	.get_settings	  = sfx7101_get_settings,
-	.set_settings	  = mdio_clause45_set_settings,
+	.get_settings	  = tenxpress_get_settings,
+	.set_settings	  = tenxpress_set_settings,
+	.set_npage_adv    = sfx7101_set_npage_adv,
 	.num_tests	  = ARRAY_SIZE(sfx7101_test_names),
 	.test_names	  = sfx7101_test_names,
 	.run_tests	  = sfx7101_run_tests,
@@ -898,9 +839,9 @@ struct efx_phy_operations falcon_sft9001_phy_ops = {
 	.poll             = tenxpress_phy_poll,
 	.fini             = tenxpress_phy_fini,
 	.clear_interrupt  = efx_port_dummy_op_void,
-	.get_settings	  = sft9001_get_settings,
-	.set_settings	  = sft9001_set_settings,
-	.set_xnp_advertise = sft9001_set_xnp_advertise,
+	.get_settings	  = tenxpress_get_settings,
+	.set_settings	  = tenxpress_set_settings,
+	.set_npage_adv    = sft9001_set_npage_adv,
 	.num_tests	  = ARRAY_SIZE(sft9001_test_names),
 	.test_names	  = sft9001_test_names,
 	.run_tests	  = sft9001_run_tests,
diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h
index 82e03e1d737..78de68f4a95 100644
--- a/drivers/net/sfc/workarounds.h
+++ b/drivers/net/sfc/workarounds.h
@@ -18,8 +18,8 @@
 #define EFX_WORKAROUND_ALWAYS(efx) 1
 #define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1)
 #define EFX_WORKAROUND_10G(efx) EFX_IS10G(efx)
-#define EFX_WORKAROUND_SFX7101(efx) ((efx)->phy_type == PHY_TYPE_SFX7101)
-#define EFX_WORKAROUND_SFT9001A(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A)
+#define EFX_WORKAROUND_SFT9001(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A || \
+				     (efx)->phy_type == PHY_TYPE_SFT9001B)
 
 /* XAUI resets if link not detected */
 #define EFX_WORKAROUND_5147 EFX_WORKAROUND_ALWAYS
@@ -29,8 +29,6 @@
 #define EFX_WORKAROUND_7884 EFX_WORKAROUND_10G
 /* TX pkt parser problem with <= 16 byte TXes */
 #define EFX_WORKAROUND_9141 EFX_WORKAROUND_ALWAYS
-/* Low rate CRC errors require XAUI reset */
-#define EFX_WORKAROUND_10750 EFX_WORKAROUND_SFX7101
 /* TX_EV_PKT_ERR can be caused by a dangling TX descriptor
  * or a PCIe error (bug 11028) */
 #define EFX_WORKAROUND_10727 EFX_WORKAROUND_ALWAYS
@@ -55,8 +53,8 @@
 #define EFX_WORKAROUND_8071 EFX_WORKAROUND_FALCON_A
 
 /* Need to send XNP pages for 100BaseT */
-#define EFX_WORKAROUND_13204 EFX_WORKAROUND_SFT9001A
-/* Need to keep AN enabled */
-#define EFX_WORKAROUND_13963 EFX_WORKAROUND_SFT9001A
+#define EFX_WORKAROUND_13204 EFX_WORKAROUND_SFT9001
+/* Don't restart AN in near-side loopback */
+#define EFX_WORKAROUND_15195 EFX_WORKAROUND_SFT9001
 
 #endif /* EFX_WORKAROUNDS_H */
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index 607efeaf0bc..9a00e5566af 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -1003,9 +1003,9 @@ static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 		break;
 	case SKFP_CLR_STATS:	/* Zero out the driver statistics */
 		if (!capable(CAP_NET_ADMIN)) {
-			memset(&lp->MacStat, 0, sizeof(lp->MacStat));
-		} else {
 			status = -EPERM;
+		} else {
+			memset(&lp->MacStat, 0, sizeof(lp->MacStat));
 		}
 		break;
 	default:
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 3668e81e474..994703cc0db 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1403,9 +1403,6 @@ static int sky2_up(struct net_device *dev)
 
  	}
 
-	if (netif_msg_ifup(sky2))
-		printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
-
 	netif_carrier_off(dev);
 
 	/* must be power of 2 */
@@ -1484,6 +1481,9 @@ static int sky2_up(struct net_device *dev)
 	sky2_write32(hw, B0_IMSK, imask);
 
 	sky2_set_multicast(dev);
+
+	if (netif_msg_ifup(sky2))
+		printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
 	return 0;
 
 err_out:
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index bf3aa2a1eff..223cde0d43b 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -220,9 +220,9 @@ static void smc911x_reset(struct net_device *dev)
 
 	/* make sure EEPROM has finished loading before setting GPIO_CFG */
 	timeout=1000;
-	while ( timeout-- && (SMC_GET_E2P_CMD(lp) & E2P_CMD_EPC_BUSY_)) {
+	while (--timeout && (SMC_GET_E2P_CMD(lp) & E2P_CMD_EPC_BUSY_))
 		udelay(10);
-	}
+
 	if (timeout == 0){
 		PRINTK("%s: smc911x_reset timeout waiting for EEPROM busy\n", dev->name);
 		return;
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index f513bdf1c88..783c1a7b869 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -953,7 +953,7 @@ smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktbytes)
 		do {
 			udelay(1);
 			val = smsc911x_reg_read(pdata, RX_DP_CTRL);
-		} while (timeout-- && (val & RX_DP_CTRL_RX_FFWD_));
+		} while (--timeout && (val & RX_DP_CTRL_RX_FFWD_));
 
 		if (unlikely(timeout == 0))
 			SMSC_WARNING(HW, "Timed out waiting for "
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index c14a4c6452c..a1e4b3895b3 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -498,7 +498,7 @@ static void smsc9420_check_mac_address(struct net_device *dev)
 static void smsc9420_stop_tx(struct smsc9420_pdata *pd)
 {
 	u32 dmac_control, mac_cr, dma_intr_ena;
-	int timeOut = 1000;
+	int timeout = 1000;
 
 	/* disable TX DMAC */
 	dmac_control = smsc9420_reg_read(pd, DMAC_CONTROL);
@@ -506,13 +506,13 @@ static void smsc9420_stop_tx(struct smsc9420_pdata *pd)
 	smsc9420_reg_write(pd, DMAC_CONTROL, dmac_control);
 
 	/* Wait max 10ms for transmit process to stop */
-	while (timeOut--) {
+	while (--timeout) {
 		if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_TS_)
 			break;
 		udelay(10);
 	}
 
-	if (!timeOut)
+	if (!timeout)
 		smsc_warn(IFDOWN, "TX DMAC failed to stop");
 
 	/* ACK Tx DMAC stop bit */
@@ -596,7 +596,7 @@ static void smsc9420_free_rx_ring(struct smsc9420_pdata *pd)
 
 static void smsc9420_stop_rx(struct smsc9420_pdata *pd)
 {
-	int timeOut = 1000;
+	int timeout = 1000;
 	u32 mac_cr, dmac_control, dma_intr_ena;
 
 	/* mask RX DMAC interrupts */
@@ -617,13 +617,13 @@ static void smsc9420_stop_rx(struct smsc9420_pdata *pd)
 	smsc9420_pci_flush_write(pd);
 
 	/* wait up to 10ms for receive to stop */
-	while (timeOut--) {
+	while (--timeout) {
 		if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_RS_)
 			break;
 		udelay(10);
 	}
 
-	if (!timeOut)
+	if (!timeout)
 		smsc_warn(IFDOWN, "RX DMAC did not stop! timeout.");
 
 	/* ACK the Rx DMAC stop bit */
@@ -1378,6 +1378,7 @@ static int smsc9420_open(struct net_device *dev)
 
 	/* test the IRQ connection to the ISR */
 	smsc_dbg(IFUP, "Testing ISR using IRQ %d", dev->irq);
+	pd->software_irq_signal = false;
 
 	spin_lock_irqsave(&pd->int_lock, flags);
 	/* configure interrupt deassertion timer and enable interrupts */
@@ -1393,8 +1394,6 @@ static int smsc9420_open(struct net_device *dev)
 	smsc9420_pci_flush_write(pd);
 
 	timeout = 1000;
-	pd->software_irq_signal = false;
-	smp_wmb();
 	while (timeout--) {
 		if (pd->software_irq_signal)
 			break;
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 86c765d83de..b17efa9cc53 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -148,7 +148,7 @@ static u16 __phy_read(struct gem *gp, int phy_addr, int reg)
 	cmd |= (MIF_FRAME_TAMSB);
 	writel(cmd, gp->regs + MIF_FRAME);
 
-	while (limit--) {
+	while (--limit) {
 		cmd = readl(gp->regs + MIF_FRAME);
 		if (cmd & MIF_FRAME_TALSB)
 			break;
diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
index 61843fd5752..78f8cee5fd7 100644
--- a/drivers/net/sungem_phy.c
+++ b/drivers/net/sungem_phy.c
@@ -79,7 +79,7 @@ static int reset_one_mii_phy(struct mii_phy* phy, int phy_id)
 
 	udelay(100);
 
-	while (limit--) {
+	while (--limit) {
 		val = __phy_read(phy, phy_id, MII_BMCR);
 		if ((val & BMCR_RESET) == 0)
 			break;
diff --git a/drivers/net/sunqe.c b/drivers/net/sunqe.c
index 6e8f377355f..fe0c3f24456 100644
--- a/drivers/net/sunqe.c
+++ b/drivers/net/sunqe.c
@@ -227,7 +227,7 @@ static int qe_init(struct sunqe *qep, int from_irq)
 	if (!(sbus_readb(mregs + MREGS_PHYCONFIG) & MREGS_PHYCONFIG_LTESTDIS)) {
 		int tries = 50;
 
-		while (tries--) {
+		while (--tries) {
 			u8 tmp;
 
 			mdelay(5);
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 5e2dbaee125..8b3f8468538 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7535,11 +7535,58 @@ static int tg3_test_msi(struct tg3 *tp)
 	return err;
 }
 
+static int tg3_request_firmware(struct tg3 *tp)
+{
+	const __be32 *fw_data;
+
+	if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) {
+		printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n",
+		       tp->dev->name, tp->fw_needed);
+		return -ENOENT;
+	}
+
+	fw_data = (void *)tp->fw->data;
+
+	/* Firmware blob starts with version numbers, followed by
+	 * start address and _full_ length including BSS sections
+	 * (which must be longer than the actual data, of course
+	 */
+
+	tp->fw_len = be32_to_cpu(fw_data[2]);	/* includes bss */
+	if (tp->fw_len < (tp->fw->size - 12)) {
+		printk(KERN_ERR "%s: bogus length %d in \"%s\"\n",
+		       tp->dev->name, tp->fw_len, tp->fw_needed);
+		release_firmware(tp->fw);
+		tp->fw = NULL;
+		return -EINVAL;
+	}
+
+	/* We no longer need firmware; we have it. */
+	tp->fw_needed = NULL;
+	return 0;
+}
+
 static int tg3_open(struct net_device *dev)
 {
 	struct tg3 *tp = netdev_priv(dev);
 	int err;
 
+	if (tp->fw_needed) {
+		err = tg3_request_firmware(tp);
+		if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) {
+			if (err)
+				return err;
+		} else if (err) {
+			printk(KERN_WARNING "%s: TSO capability disabled.\n",
+			       tp->dev->name);
+			tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
+		} else if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
+			printk(KERN_NOTICE "%s: TSO capability restored.\n",
+			       tp->dev->name);
+			tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
+		}
+	}
+
 	netif_carrier_off(tp->dev);
 
 	err = tg3_set_power_state(tp, PCI_D0);
@@ -12934,7 +12981,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	struct net_device *dev;
 	struct tg3 *tp;
 	int err, pm_cap;
-	const char *fw_name = NULL;
 	char str[40];
 	u64 dma_mask, persist_dma_mask;
 
@@ -13091,7 +13137,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	tg3_init_bufmgr_config(tp);
 
 	if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0)
-		fw_name = FIRMWARE_TG3;
+		tp->fw_needed = FIRMWARE_TG3;
 
 	if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
 		tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
@@ -13104,37 +13150,10 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 		tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
 	} else {
 		tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE | TG3_FLG2_TSO_BUG;
-	}
-	if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) {
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)
-			fw_name = FIRMWARE_TG3TSO5;
+			tp->fw_needed = FIRMWARE_TG3TSO5;
 		else
-			fw_name = FIRMWARE_TG3TSO;
-	}
-
-	if (fw_name) {
-		const __be32 *fw_data;
-
-		err = request_firmware(&tp->fw, fw_name, &tp->pdev->dev);
-		if (err) {
-			printk(KERN_ERR "tg3: Failed to load firmware \"%s\"\n",
-			       fw_name);
-			goto err_out_iounmap;
-		}
-
-		fw_data = (void *)tp->fw->data;
-
-		/* Firmware blob starts with version numbers, followed by
-		   start address and _full_ length including BSS sections
-		   (which must be longer than the actual data, of course */
-
-		tp->fw_len = be32_to_cpu(fw_data[2]);	/* includes bss */
-		if (tp->fw_len < (tp->fw->size - 12)) {
-			printk(KERN_ERR "tg3: bogus length %d in \"%s\"\n",
-			       tp->fw_len, fw_name);
-			err = -EINVAL;
-			goto err_out_fw;
-		}
+			tp->fw_needed = FIRMWARE_TG3TSO;
 	}
 
 	/* TSO is on by default on chips that support hardware TSO.
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index ae5da603c6a..508def3e077 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2764,6 +2764,7 @@ struct tg3 {
 	struct ethtool_coalesce		coal;
 
 	/* firmware info */
+	const char			*fw_needed;
 	const struct firmware		*fw;
 	u32				fw_len; /* includes BSS */
 };
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index 75461dbd487..a9fd2b2ccaf 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -1237,7 +1237,7 @@ static void tsi108_init_phy(struct net_device *dev)
 	spin_lock_irqsave(&phy_lock, flags);
 
 	tsi108_write_mii(data, MII_BMCR, BMCR_RESET);
-	while (i--){
+	while (--i) {
 		if(!(tsi108_read_mii(data, MII_BMCR) & BMCR_RESET))
 			break;
 		udelay(10);
diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c
index 1210fb3748a..db7d5e11855 100644
--- a/drivers/net/tulip/21142.c
+++ b/drivers/net/tulip/21142.c
@@ -9,6 +9,11 @@
 
 	Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
 	for more information on this driver.
+
+	DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller
+	Hardware Reference Manual" is currently available at :
+	http://developer.intel.com/design/network/manuals/278074.htm
+
 	Please submit bugs to http://bugzilla.kernel.org/ .
 */
 
@@ -32,7 +37,11 @@ void t21142_media_task(struct work_struct *work)
 	int csr12 = ioread32(ioaddr + CSR12);
 	int next_tick = 60*HZ;
 	int new_csr6 = 0;
+	int csr14 = ioread32(ioaddr + CSR14);
 
+	/* CSR12[LS10,LS100] are not reliable during autonegotiation */
+	if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000)
+		csr12 |= 6;
 	if (tulip_debug > 2)
 		printk(KERN_INFO"%s: 21143 negotiation status %8.8x, %s.\n",
 			   dev->name, csr12, medianame[dev->if_port]);
@@ -76,7 +85,7 @@ void t21142_media_task(struct work_struct *work)
 			new_csr6 = 0x83860000;
 			dev->if_port = 3;
 			iowrite32(0, ioaddr + CSR13);
-			iowrite32(0x0003FF7F, ioaddr + CSR14);
+			iowrite32(0x0003FFFF, ioaddr + CSR14);
 			iowrite16(8, ioaddr + CSR15);
 			iowrite32(1, ioaddr + CSR13);
 		}
@@ -132,10 +141,14 @@ void t21142_lnk_change(struct net_device *dev, int csr5)
 	struct tulip_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->base_addr;
 	int csr12 = ioread32(ioaddr + CSR12);
+	int csr14 = ioread32(ioaddr + CSR14);
 
+	/* CSR12[LS10,LS100] are not reliable during autonegotiation */
+	if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000)
+		csr12 |= 6;
 	if (tulip_debug > 1)
 		printk(KERN_INFO"%s: 21143 link status interrupt %8.8x, CSR5 %x, "
-			   "%8.8x.\n", dev->name, csr12, csr5, ioread32(ioaddr + CSR14));
+			   "%8.8x.\n", dev->name, csr12, csr5, csr14);
 
 	/* If NWay finished and we have a negotiated partner capability. */
 	if (tp->nway  &&  !tp->nwayset  &&  (csr12 & 0x7000) == 0x5000) {
@@ -143,7 +156,9 @@ void t21142_lnk_change(struct net_device *dev, int csr5)
 		int negotiated = tp->sym_advertise & (csr12 >> 16);
 		tp->lpar = csr12 >> 16;
 		tp->nwayset = 1;
-		if (negotiated & 0x0100)		dev->if_port = 5;
+		/* If partner cannot negotiate, it is 10Mbps Half Duplex */
+		if (!(csr12 & 0x8000))		dev->if_port = 0;
+		else if (negotiated & 0x0100)	dev->if_port = 5;
 		else if (negotiated & 0x0080)	dev->if_port = 3;
 		else if (negotiated & 0x0040)	dev->if_port = 4;
 		else if (negotiated & 0x0020)	dev->if_port = 0;
@@ -214,7 +229,7 @@ void t21142_lnk_change(struct net_device *dev, int csr5)
 			tp->timer.expires = RUN_AT(3*HZ);
 			add_timer(&tp->timer);
 		} else if (dev->if_port == 5)
-			iowrite32(ioread32(ioaddr + CSR14) & ~0x080, ioaddr + CSR14);
+			iowrite32(csr14 & ~0x080, ioaddr + CSR14);
 	} else if (dev->if_port == 0  ||  dev->if_port == 4) {
 		if ((csr12 & 4) == 0)
 			printk(KERN_INFO"%s: 21143 10baseT link beat good.\n",
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index d5d53b633cf..0bf2114738b 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -392,7 +392,7 @@ static void de_rx (struct de_private *de)
 	unsigned drop = 0;
 	int rc;
 
-	while (rx_work--) {
+	while (--rx_work) {
 		u32 status, len;
 		dma_addr_t mapping;
 		struct sk_buff *skb, *copy_skb;
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 11441225bf4..e87986867ba 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1536,6 +1536,11 @@ static void adjust_link(struct net_device *dev)
 static int init_phy(struct net_device *dev)
 {
 	struct ucc_geth_private *priv = netdev_priv(dev);
+	struct device_node *np = priv->node;
+	struct device_node *phy, *mdio;
+	const phandle *ph;
+	char bus_name[MII_BUS_ID_SIZE];
+	const unsigned int *id;
 	struct phy_device *phydev;
 	char phy_id[BUS_ID_SIZE];
 
@@ -1543,8 +1548,18 @@ static int init_phy(struct net_device *dev)
 	priv->oldspeed = 0;
 	priv->oldduplex = -1;
 
-	snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, priv->ug_info->mdio_bus,
-		 priv->ug_info->phy_address);
+	ph = of_get_property(np, "phy-handle", NULL);
+	phy = of_find_node_by_phandle(*ph);
+	mdio = of_get_parent(phy);
+
+	id = of_get_property(phy, "reg", NULL);
+
+	of_node_put(phy);
+	of_node_put(mdio);
+
+	uec_mdio_bus_name(bus_name, mdio);
+	snprintf(phy_id, sizeof(phy_id), "%s:%02x",
+                                bus_name, *id);
 
 	phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface);
 
@@ -3748,6 +3763,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 
 	ugeth->ug_info = ug_info;
 	ugeth->dev = dev;
+	ugeth->node = np;
 
 	return 0;
 }
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 8f699cb773e..16cbe42ba43 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -1186,6 +1186,8 @@ struct ucc_geth_private {
 	int oldspeed;
 	int oldduplex;
 	int oldlink;
+
+	struct device_node *node;
 };
 
 void uec_set_ethtool_ops(struct net_device *netdev);
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index c001d261366..54635911305 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -156,7 +156,7 @@ static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *ma
 	if (err)
 		goto reg_map_fail;
 
-	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", res.start);
+	uec_mdio_bus_name(new_bus->id, np);
 
 	new_bus->irq = kmalloc(32 * sizeof(int), GFP_KERNEL);
 
@@ -283,3 +283,13 @@ void uec_mdio_exit(void)
 {
 	of_unregister_platform_driver(&uec_mdio_driver);
 }
+
+void uec_mdio_bus_name(char *name, struct device_node *np)
+{
+        const u32 *reg;
+
+        reg = of_get_property(np, "reg", NULL);
+
+        snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0);
+}
+
diff --git a/drivers/net/ucc_geth_mii.h b/drivers/net/ucc_geth_mii.h
index 1e45b2028a5..840cf80235b 100644
--- a/drivers/net/ucc_geth_mii.h
+++ b/drivers/net/ucc_geth_mii.h
@@ -97,4 +97,5 @@ int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum);
 int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value);
 int __init uec_mdio_init(void);
 void uec_mdio_exit(void);
+void uec_mdio_bus_name(char *name, struct device_node *np);
 #endif				/* __UEC_MII_H */
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 0d0fa91c025..fe98acaead9 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -455,6 +455,7 @@ static const struct usb_device_id hso_ids[] = {
 	{icon321_port_device(0x0af0, 0xd033)},	/* Icon-322 */
 	{USB_DEVICE(0x0af0, 0x7301)},		/* GE40x */
 	{USB_DEVICE(0x0af0, 0x7361)},		/* GE40x */
+	{USB_DEVICE(0x0af0, 0x7381)},		/* GE40x */
 	{USB_DEVICE(0x0af0, 0x7401)},		/* GI 0401 */
 	{USB_DEVICE(0x0af0, 0x7501)},		/* GTM 382 */
 	{USB_DEVICE(0x0af0, 0x7601)},		/* GE40x */
@@ -462,7 +463,8 @@ static const struct usb_device_id hso_ids[] = {
 	{USB_DEVICE(0x0af0, 0x7801)},
 	{USB_DEVICE(0x0af0, 0x7901)},
 	{USB_DEVICE(0x0af0, 0x7361)},
-	{icon321_port_device(0x0af0, 0xd051)},
+	{USB_DEVICE(0x0af0, 0xd057)},
+	{USB_DEVICE(0x0af0, 0xd055)},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, hso_ids);
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 5385d66b306..ced8f36ebd0 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -94,10 +94,18 @@ static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data)
 {
 	struct usb_device *xdev = dev->udev;
 	int ret;
+	void *buffer;
+
+	buffer = kmalloc(size, GFP_NOIO);
+	if (buffer == NULL)
+		return -ENOMEM;
 
 	ret = usb_control_msg(xdev, usb_rcvctrlpipe(xdev, 0), MCS7830_RD_BREQ,
-			      MCS7830_RD_BMREQ, 0x0000, index, data,
+			      MCS7830_RD_BMREQ, 0x0000, index, buffer,
 			      size, MCS7830_CTRL_TIMEOUT);
+	memcpy(data, buffer, size);
+	kfree(buffer);
+
 	return ret;
 }
 
@@ -105,10 +113,18 @@ static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, void *data)
 {
 	struct usb_device *xdev = dev->udev;
 	int ret;
+	void *buffer;
+
+	buffer = kmalloc(size, GFP_NOIO);
+	if (buffer == NULL)
+		return -ENOMEM;
+
+	memcpy(buffer, data, size);
 
 	ret = usb_control_msg(xdev, usb_sndctrlpipe(xdev, 0), MCS7830_WR_BREQ,
-			      MCS7830_WR_BMREQ, 0x0000, index, data,
+			      MCS7830_WR_BMREQ, 0x0000, index, buffer,
 			      size, MCS7830_CTRL_TIMEOUT);
+	kfree(buffer);
 	return ret;
 }
 
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index a75f91dc315..c5691fdb707 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1302,7 +1302,7 @@ static void velocity_free_rd_ring(struct velocity_info *vptr)
 static int velocity_init_td_ring(struct velocity_info *vptr)
 {
 	dma_addr_t curr;
-	unsigned int j;
+	int j;
 
 	/* Init the TD ring entries */
 	for (j = 0; j < vptr->tx.numq; j++) {
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 43f6523c40b..c68808336c8 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -24,6 +24,7 @@
 #include <linux/virtio.h>
 #include <linux/virtio_net.h>
 #include <linux/scatterlist.h>
+#include <linux/if_vlan.h>
 
 static int napi_weight = 128;
 module_param(napi_weight, int, 0444);
@@ -33,7 +34,7 @@ module_param(csum, bool, 0444);
 module_param(gso, bool, 0444);
 
 /* FIXME: MTU in config. */
-#define MAX_PACKET_LEN (ETH_HLEN+ETH_DATA_LEN)
+#define MAX_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN)
 #define GOOD_COPY_LEN	128
 
 struct virtnet_info
@@ -286,7 +287,7 @@ static void try_fill_recv_maxbufs(struct virtnet_info *vi)
 		skb_put(skb, MAX_PACKET_LEN);
 
 		hdr = skb_vnet_hdr(skb);
-		sg_init_one(sg, hdr, sizeof(*hdr));
+		sg_set_buf(sg, hdr, sizeof(*hdr));
 
 		if (vi->big_packets) {
 			for (i = 0; i < MAX_SKB_FRAGS; i++) {
@@ -487,9 +488,9 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
 
 	/* Encode metadata header at front. */
 	if (vi->mergeable_rx_bufs)
-		sg_init_one(sg, mhdr, sizeof(*mhdr));
+		sg_set_buf(sg, mhdr, sizeof(*mhdr));
 	else
-		sg_init_one(sg, hdr, sizeof(*hdr));
+		sg_set_buf(sg, hdr, sizeof(*hdr));
 
 	num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
 
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index d3d37fed689..15d9f51b292 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -609,7 +609,7 @@ void i2400m_msg_to_dev_cancel_wait(struct i2400m *i2400m, int code)
 	spin_lock_irqsave(&i2400m->rx_lock, flags);
 	ack_skb = i2400m->ack_skb;
 	if (ack_skb && !IS_ERR(ack_skb))
-		kfree(ack_skb);
+		kfree_skb(ack_skb);
 	i2400m->ack_skb = ERR_PTR(code);
 	spin_unlock_irqrestore(&i2400m->rx_lock, flags);
 }
diff --git a/drivers/net/wimax/i2400m/debugfs.c b/drivers/net/wimax/i2400m/debugfs.c
index 62663298597..9b81af3f80a 100644
--- a/drivers/net/wimax/i2400m/debugfs.c
+++ b/drivers/net/wimax/i2400m/debugfs.c
@@ -234,20 +234,6 @@ struct dentry *debugfs_create_i2400m_reset(
 				   &fops_i2400m_reset);
 }
 
-/*
- * Debug levels control; see debug.h
- */
-struct d_level D_LEVEL[] = {
-	D_SUBMODULE_DEFINE(control),
-	D_SUBMODULE_DEFINE(driver),
-	D_SUBMODULE_DEFINE(debugfs),
-	D_SUBMODULE_DEFINE(fw),
-	D_SUBMODULE_DEFINE(netdev),
-	D_SUBMODULE_DEFINE(rfkill),
-	D_SUBMODULE_DEFINE(rx),
-	D_SUBMODULE_DEFINE(tx),
-};
-size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
 
 #define __debugfs_register(prefix, name, parent)			\
 do {									\
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index 5f98047e18c..e80a0b65a75 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -707,6 +707,22 @@ void i2400m_release(struct i2400m *i2400m)
 EXPORT_SYMBOL_GPL(i2400m_release);
 
 
+/*
+ * Debug levels control; see debug.h
+ */
+struct d_level D_LEVEL[] = {
+	D_SUBMODULE_DEFINE(control),
+	D_SUBMODULE_DEFINE(driver),
+	D_SUBMODULE_DEFINE(debugfs),
+	D_SUBMODULE_DEFINE(fw),
+	D_SUBMODULE_DEFINE(netdev),
+	D_SUBMODULE_DEFINE(rfkill),
+	D_SUBMODULE_DEFINE(rx),
+	D_SUBMODULE_DEFINE(tx),
+};
+size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
+
+
 static
 int __init i2400m_driver_init(void)
 {
diff --git a/drivers/net/wimax/i2400m/usb-rx.c b/drivers/net/wimax/i2400m/usb-rx.c
index 074cc1f8985..a314799967c 100644
--- a/drivers/net/wimax/i2400m/usb-rx.c
+++ b/drivers/net/wimax/i2400m/usb-rx.c
@@ -184,6 +184,8 @@ void i2400mu_rx_size_maybe_shrink(struct i2400mu *i2400mu)
  *   NOTE: this function might realloc the skb (if it is too small),
  *   so always update with the one returned.
  *   ERR_PTR() is < 0 on error.
+ *   Will return NULL if it cannot reallocate -- this can be
+ *   considered a transient retryable error.
  */
 static
 struct sk_buff *i2400mu_rx(struct i2400mu *i2400mu, struct sk_buff *rx_skb)
@@ -243,8 +245,8 @@ retry:
 			if (printk_ratelimit())
 				dev_err(dev, "RX: Can't reallocate skb to %d; "
 					"RX dropped\n", rx_size);
-			kfree(rx_skb);
-			result = 0;
+			kfree_skb(rx_skb);
+			rx_skb = NULL;
 			goto out;	/* drop it...*/
 		}
 		kfree_skb(rx_skb);
@@ -344,7 +346,8 @@ int i2400mu_rxd(void *_i2400mu)
 		if (IS_ERR(rx_skb))
 			goto out;
 		atomic_dec(&i2400mu->rx_pending_count);
-		if (rx_skb->len == 0) {	/* some ignorable condition */
+		if (rx_skb == NULL || rx_skb->len == 0) {
+			/* some "ignorable" condition */
 			kfree_skb(rx_skb);
 			continue;
 		}
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 8ef87356e08..a533ed60bb4 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -1028,6 +1028,8 @@ ath5k_setup_bands(struct ieee80211_hw *hw)
  * it's done by reseting the chip.  To accomplish this we must
  * first cleanup any pending DMA, then restart stuff after a la
  * ath5k_init.
+ *
+ * Called with sc->lock.
  */
 static int
 ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
@@ -2814,11 +2816,17 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct ath5k_softc *sc = hw->priv;
 	struct ieee80211_conf *conf = &hw->conf;
+	int ret;
+
+	mutex_lock(&sc->lock);
 
 	sc->bintval = conf->beacon_int;
 	sc->power_level = conf->power_level;
 
-	return ath5k_chan_set(sc, conf->channel);
+	ret = ath5k_chan_set(sc, conf->channel);
+
+	mutex_unlock(&sc->lock);
+	return ret;
 }
 
 static int
diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c
index 04ab457a8fa..1b71b934bb5 100644
--- a/drivers/net/wireless/ath9k/rc.c
+++ b/drivers/net/wireless/ath9k/rc.c
@@ -490,7 +490,7 @@ static inline int ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table,
 
 static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw)
 {
-	if (WLAN_RC_PHY_HT(phy) & !(capflag & WLAN_RC_HT_FLAG))
+	if (WLAN_RC_PHY_HT(phy) && !(capflag & WLAN_RC_HT_FLAG))
 		return 0;
 	if (WLAN_RC_PHY_DS(phy) && !(capflag & WLAN_RC_DS_FLAG))
 		return 0;
diff --git a/drivers/net/wireless/ath9k/regd_common.h b/drivers/net/wireless/ath9k/regd_common.h
index 9112c030b1e..6df1b3b77c2 100644
--- a/drivers/net/wireless/ath9k/regd_common.h
+++ b/drivers/net/wireless/ath9k/regd_common.h
@@ -228,7 +228,7 @@ enum {
 };
 
 #define REG_DOMAIN_2GHZ_MASK    (REQ_MASK & \
-	(!(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB)))
+	(~(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB)))
 #define REG_DOMAIN_5GHZ_MASK    REQ_MASK
 
 static struct reg_dmn_pair_mapping regDomainPairs[] = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index 9b60a0c5de5..21c841847d8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -638,12 +638,16 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
 	s8 scale_action = 0;
 	unsigned long flags;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-	u16 fc, rate_mask;
+	u16 fc;
+	u16 rate_mask = 0;
 	struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_r;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
 	IWL_DEBUG_RATE("enter\n");
 
+	if (sta)
+		rate_mask = sta->supp_rates[sband->band];
+
 	/* Send management frames and broadcast/multicast data using lowest
 	 * rate. */
 	fc = le16_to_cpu(hdr->frame_control);
@@ -651,11 +655,15 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
 	    is_multicast_ether_addr(hdr->addr1) ||
 	    !sta || !priv_sta) {
 		IWL_DEBUG_RATE("leave: No STA priv data to update!\n");
-		info->control.rates[0].idx = rate_lowest_index(sband, sta);
+		if (!rate_mask)
+			info->control.rates[0].idx =
+					rate_lowest_index(sband, NULL);
+		else
+			info->control.rates[0].idx =
+					rate_lowest_index(sband, sta);
 		return;
 	}
 
-	rate_mask = sta->supp_rates[sband->band];
 	index = min(rs_sta->last_txrate_idx & 0xffff, IWL_RATE_COUNT - 1);
 
 	if (sband->band == IEEE80211_BAND_5GHZ)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index f3f17929ca0..27f50471aed 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -944,7 +944,8 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
 	}
 
 	/* See if there's a better rate or modulation mode to try. */
-	rs_rate_scale_perform(priv, hdr, sta, lq_sta);
+	if (sta && sta->supp_rates[sband->band])
+		rs_rate_scale_perform(priv, hdr, sta, lq_sta);
 out:
 	return;
 }
@@ -2101,14 +2102,23 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct iwl_lq_sta *lq_sta = priv_sta;
 	int rate_idx;
+	u64 mask_bit = 0;
 
 	IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n");
 
+	if (sta)
+		mask_bit = sta->supp_rates[sband->band];
+
 	/* Send management frames and broadcast/multicast data using lowest
 	 * rate. */
 	if (!ieee80211_is_data(hdr->frame_control) ||
 	    is_multicast_ether_addr(hdr->addr1) || !sta || !lq_sta) {
-		info->control.rates[0].idx = rate_lowest_index(sband, sta);
+		if (!mask_bit)
+			info->control.rates[0].idx =
+					rate_lowest_index(sband, NULL);
+		else
+			info->control.rates[0].idx =
+					rate_lowest_index(sband, sta);
 		return;
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 5da6b35cd26..c01ea48da5f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1719,6 +1719,10 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 	priv->ucode_data_backup.len = data_size;
 	iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
 
+	if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
+	    !priv->ucode_data_backup.v_addr)
+		goto err_pci_alloc;
+
 	/* Initialization instructions and data */
 	if (init_size && init_data_size) {
 		priv->ucode_init.len = init_size;
@@ -2482,7 +2486,7 @@ static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		dev_kfree_skb_any(skb);
 
 	IWL_DEBUG_MACDUMP("leave\n");
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static int iwl_mac_add_interface(struct ieee80211_hw *hw,
@@ -4038,6 +4042,7 @@ static int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 		priv->is_open = 1;
 	}
 
+	pci_save_state(pdev);
 	pci_set_power_state(pdev, PCI_D3hot);
 
 	return 0;
@@ -4048,6 +4053,7 @@ static int iwl_pci_resume(struct pci_dev *pdev)
 	struct iwl_priv *priv = pci_get_drvdata(pdev);
 
 	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
 
 	if (priv->is_open)
 		iwl_mac_start(priv->hw);
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index 8c71ad4f88c..4b35b30e493 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -224,7 +224,7 @@ int iwl_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 		IWL_ERROR("Error: Response NULL in '%s'\n",
 			  get_cmd_string(cmd->id));
 		ret = -EIO;
-		goto out;
+		goto cancel;
 	}
 
 	ret = 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 412f66bac1a..70a8b21ca39 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -480,6 +480,9 @@ void iwl_clear_stations_table(struct iwl_priv *priv)
 	priv->num_stations = 0;
 	memset(priv->stations, 0, sizeof(priv->stations));
 
+	/* clean ucode key table bit map */
+	priv->ucode_key_table = 0;
+
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 }
 EXPORT_SYMBOL(iwl_clear_stations_table);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index d64580805d6..5b44d322b99 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -745,7 +745,7 @@ static int iwl3945_send_cmd_sync(struct iwl3945_priv *priv, struct iwl3945_host_
 		IWL_ERROR("Error: Response NULL in '%s'\n",
 			  get_cmd_string(cmd->id));
 		ret = -EIO;
-		goto out;
+		goto cancel;
 	}
 
 	ret = 0;
@@ -6538,7 +6538,7 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		dev_kfree_skb_any(skb);
 
 	IWL_DEBUG_MAC80211("leave\n");
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static int iwl3945_mac_add_interface(struct ieee80211_hw *hw,
@@ -8143,6 +8143,7 @@ static int iwl3945_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 		priv->is_open = 1;
 	}
 
+	pci_save_state(pdev);
 	pci_set_power_state(pdev, PCI_D3hot);
 
 	return 0;
@@ -8153,6 +8154,7 @@ static int iwl3945_pci_resume(struct pci_dev *pdev)
 	struct iwl3945_priv *priv = pci_get_drvdata(pdev);
 
 	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
 
 	if (priv->is_open)
 		iwl3945_mac_start(priv->hw);
diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h
index e173b1b46c2..f6a79a653b7 100644
--- a/drivers/net/wireless/libertas/hostcmd.h
+++ b/drivers/net/wireless/libertas/hostcmd.h
@@ -32,7 +32,7 @@ struct txpd {
 	u8 pktdelay_2ms;
 	/* reserved */
 	u8 reserved1;
-};
+} __attribute__ ((packed));
 
 /* RxPD Descriptor */
 struct rxpd {
@@ -63,7 +63,7 @@ struct rxpd {
 	/* Pkt Priority */
 	u8 priority;
 	u8 reserved[3];
-};
+} __attribute__ ((packed));
 
 struct cmd_header {
 	__le16 command;
@@ -97,7 +97,7 @@ struct enc_key {
 struct lbs_offset_value {
 	u32 offset;
 	u32 value;
-};
+} __attribute__ ((packed));
 
 /* Define general data structure */
 /* cmd_DS_GEN */
@@ -107,7 +107,7 @@ struct cmd_ds_gen {
 	__le16 seqnum;
 	__le16 result;
 	void *cmdresp[0];
-};
+} __attribute__ ((packed));
 
 #define S_DS_GEN sizeof(struct cmd_ds_gen)
 
@@ -163,7 +163,7 @@ struct cmd_ds_802_11_subscribe_event {
 	 * bump this up a bit.
 	 */
 	uint8_t tlv[128];
-};
+} __attribute__ ((packed));
 
 /*
  * This scan handle Country Information IE(802.11d compliant)
@@ -180,7 +180,7 @@ struct cmd_ds_802_11_scan {
 	mrvlietypes_chanlistparamset_t ChanListParamSet;
 	mrvlietypes_ratesparamset_t OpRateSet;
 #endif
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_scan_rsp {
 	struct cmd_header hdr;
@@ -188,7 +188,7 @@ struct cmd_ds_802_11_scan_rsp {
 	__le16 bssdescriptsize;
 	uint8_t nr_sets;
 	uint8_t bssdesc_and_tlvbuffer[0];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_get_log {
 	struct cmd_header hdr;
@@ -206,33 +206,33 @@ struct cmd_ds_802_11_get_log {
 	__le32 fcserror;
 	__le32 txframe;
 	__le32 wepundecryptable;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_mac_control {
 	struct cmd_header hdr;
 	__le16 action;
 	u16 reserved;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_mac_multicast_adr {
 	struct cmd_header hdr;
 	__le16 action;
 	__le16 nr_of_adrs;
 	u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_authenticate {
 	u8 macaddr[ETH_ALEN];
 	u8 authtype;
 	u8 reserved[10];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_deauthenticate {
 	struct cmd_header hdr;
 
 	u8 macaddr[ETH_ALEN];
 	__le16 reasoncode;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_associate {
 	u8 peerstaaddr[6];
@@ -251,7 +251,7 @@ struct cmd_ds_802_11_associate {
 
 struct cmd_ds_802_11_associate_rsp {
 	struct ieeetypes_assocrsp assocRsp;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_set_wep {
 	struct cmd_header hdr;
@@ -265,7 +265,7 @@ struct cmd_ds_802_11_set_wep {
 	/* 40, 128bit or TXWEP */
 	uint8_t keytype[4];
 	uint8_t keymaterial[4][16];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_3_get_stat {
 	__le32 xmitok;
@@ -274,7 +274,7 @@ struct cmd_ds_802_3_get_stat {
 	__le32 rcverror;
 	__le32 rcvnobuffer;
 	__le32 rcvcrcerror;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_get_stat {
 	__le32 txfragmentcnt;
@@ -294,7 +294,7 @@ struct cmd_ds_802_11_get_stat {
 	__le32 txbeacon;
 	__le32 rxbeacon;
 	__le32 wepundecryptable;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_snmp_mib {
 	struct cmd_header hdr;
@@ -303,58 +303,58 @@ struct cmd_ds_802_11_snmp_mib {
 	__le16 oid;
 	__le16 bufsize;
 	u8 value[128];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_mac_reg_map {
 	__le16 buffersize;
 	u8 regmap[128];
 	__le16 reserved;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_bbp_reg_map {
 	__le16 buffersize;
 	u8 regmap[128];
 	__le16 reserved;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_rf_reg_map {
 	__le16 buffersize;
 	u8 regmap[64];
 	__le16 reserved;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_mac_reg_access {
 	__le16 action;
 	__le16 offset;
 	__le32 value;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_bbp_reg_access {
 	__le16 action;
 	__le16 offset;
 	u8 value;
 	u8 reserved[3];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_rf_reg_access {
 	__le16 action;
 	__le16 offset;
 	u8 value;
 	u8 reserved[3];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_radio_control {
 	struct cmd_header hdr;
 
 	__le16 action;
 	__le16 control;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_beacon_control {
 	__le16 action;
 	__le16 beacon_enable;
 	__le16 beacon_period;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_sleep_params {
 	struct cmd_header hdr;
@@ -379,7 +379,7 @@ struct cmd_ds_802_11_sleep_params {
 
 	/* reserved field, should be set to zero */
 	__le16 reserved;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_inactivity_timeout {
 	struct cmd_header hdr;
@@ -389,7 +389,7 @@ struct cmd_ds_802_11_inactivity_timeout {
 
 	/* Inactivity timeout in msec */
 	__le16 timeout;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rf_channel {
 	struct cmd_header hdr;
@@ -399,7 +399,7 @@ struct cmd_ds_802_11_rf_channel {
 	__le16 rftype;      /* unused */
 	__le16 reserved;    /* unused */
 	u8 channellist[32]; /* unused */
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rssi {
 	/* weighting factor */
@@ -408,21 +408,21 @@ struct cmd_ds_802_11_rssi {
 	__le16 reserved_0;
 	__le16 reserved_1;
 	__le16 reserved_2;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rssi_rsp {
 	__le16 SNR;
 	__le16 noisefloor;
 	__le16 avgSNR;
 	__le16 avgnoisefloor;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_mac_address {
 	struct cmd_header hdr;
 
 	__le16 action;
 	u8 macadd[ETH_ALEN];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rf_tx_power {
 	struct cmd_header hdr;
@@ -431,7 +431,7 @@ struct cmd_ds_802_11_rf_tx_power {
 	__le16 curlevel;
 	s8 maxlevel;
 	s8 minlevel;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rf_antenna {
 	__le16 action;
@@ -439,33 +439,33 @@ struct cmd_ds_802_11_rf_antenna {
 	/* Number of antennas or 0xffff(diversity) */
 	__le16 antennamode;
 
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_monitor_mode {
 	__le16 action;
 	__le16 mode;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_set_boot2_ver {
 	struct cmd_header hdr;
 
 	__le16 action;
 	__le16 version;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_fw_wake_method {
 	struct cmd_header hdr;
 
 	__le16 action;
 	__le16 method;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_sleep_period {
 	struct cmd_header hdr;
 
 	__le16 action;
 	__le16 period;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_ps_mode {
 	__le16 action;
@@ -473,7 +473,7 @@ struct cmd_ds_802_11_ps_mode {
 	__le16 multipledtim;
 	__le16 reserved;
 	__le16 locallisteninterval;
-};
+} __attribute__ ((packed));
 
 struct cmd_confirm_sleep {
 	struct cmd_header hdr;
@@ -483,7 +483,7 @@ struct cmd_confirm_sleep {
 	__le16 multipledtim;
 	__le16 reserved;
 	__le16 locallisteninterval;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_data_rate {
 	struct cmd_header hdr;
@@ -491,14 +491,14 @@ struct cmd_ds_802_11_data_rate {
 	__le16 action;
 	__le16 reserved;
 	u8 rates[MAX_RATES];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rate_adapt_rateset {
 	struct cmd_header hdr;
 	__le16 action;
 	__le16 enablehwauto;
 	__le16 bitmap;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_ad_hoc_start {
 	struct cmd_header hdr;
@@ -520,7 +520,7 @@ struct cmd_ds_802_11_ad_hoc_result {
 
 	u8 pad[3];
 	u8 bssid[ETH_ALEN];
-};
+} __attribute__ ((packed));
 
 struct adhoc_bssdesc {
 	u8 bssid[ETH_ALEN];
@@ -578,7 +578,7 @@ struct MrvlIEtype_keyParamSet {
 
 	/* key material of size keylen */
 	u8 key[32];
-};
+} __attribute__ ((packed));
 
 #define MAX_WOL_RULES 		16
 
@@ -590,7 +590,7 @@ struct host_wol_rule {
 	__le16 reserve;
 	__be32 sig_mask;
 	__be32 signature;
-};
+} __attribute__ ((packed));
 
 struct wol_config {
 	uint8_t action;
@@ -598,8 +598,7 @@ struct wol_config {
 	uint8_t no_rules_in_cmd;
 	uint8_t result;
 	struct host_wol_rule rule[MAX_WOL_RULES];
-};
-
+} __attribute__ ((packed));
 
 struct cmd_ds_host_sleep {
 	struct cmd_header hdr;
diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c
index c3bb85e0251..45a04faa781 100644
--- a/drivers/net/wireless/orinoco/orinoco.c
+++ b/drivers/net/wireless/orinoco/orinoco.c
@@ -1673,7 +1673,7 @@ static void print_linkstatus(struct net_device *dev, u16 status)
 		s = "UNKNOWN";
 	}
 	
-	printk(KERN_INFO "%s: New link status: %s (%04x)\n",
+	printk(KERN_DEBUG "%s: New link status: %s (%04x)\n",
 	       dev->name, s, status);
 }
 
@@ -5068,33 +5068,30 @@ static int orinoco_ioctl_set_genie(struct net_device *dev,
 	struct orinoco_private *priv = netdev_priv(dev);
 	u8 *buf;
 	unsigned long flags;
-	int err = 0;
 
 	/* cut off at IEEE80211_MAX_DATA_LEN */
 	if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) ||
 	    (wrqu->data.length && (extra == NULL)))
 		return -EINVAL;
 
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
 	if (wrqu->data.length) {
 		buf = kmalloc(wrqu->data.length, GFP_KERNEL);
-		if (buf == NULL) {
-			err = -ENOMEM;
-			goto out;
-		}
+		if (buf == NULL)
+			return -ENOMEM;
 
 		memcpy(buf, extra, wrqu->data.length);
-		kfree(priv->wpa_ie);
-		priv->wpa_ie = buf;
-		priv->wpa_ie_len = wrqu->data.length;
-	} else {
-		kfree(priv->wpa_ie);
-		priv->wpa_ie = NULL;
-		priv->wpa_ie_len = 0;
+	} else
+		buf = NULL;
+
+	if (orinoco_lock(priv, &flags) != 0) {
+		kfree(buf);
+		return -EBUSY;
 	}
 
+	kfree(priv->wpa_ie);
+	priv->wpa_ie = buf;
+	priv->wpa_ie_len = wrqu->data.length;
+
 	if (priv->wpa_ie) {
 		/* Looks like wl_lkm wants to check the auth alg, and
 		 * somehow pass it to the firmware.
@@ -5103,9 +5100,8 @@ static int orinoco_ioctl_set_genie(struct net_device *dev,
 		 */
 	}
 
-out:
 	orinoco_unlock(priv, &flags);
-	return err;
+	return 0;
 }
 
 static int orinoco_ioctl_get_genie(struct net_device *dev,
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index c6a370fa9bc..34561e6e816 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -451,8 +451,8 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 			}
 			if (err)
 				goto err;
-
-		}
+			}
+			break;
 		case PDR_PRISM_ZIF_TX_IQ_CALIBRATION:
 			priv->iq_autocal = kmalloc(data_len, GFP_KERNEL);
 			if (!priv->iq_autocal) {
@@ -745,7 +745,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
 		struct p54_hdr *entry_hdr;
 		struct p54_tx_data *entry_data;
-		int pad = 0;
+		unsigned int pad = 0, frame_len;
 
 		range = (void *)info->rate_driver_data;
 		if (range->start_addr != addr) {
@@ -768,6 +768,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 		__skb_unlink(entry, &priv->tx_queue);
 		spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 
+		frame_len = entry->len;
 		entry_hdr = (struct p54_hdr *) entry->data;
 		entry_data = (struct p54_tx_data *) entry_hdr->data;
 		priv->tx_stats[entry_data->hw_queue].len--;
@@ -814,15 +815,28 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 		info->status.ack_signal = p54_rssi_to_dbm(dev,
 				(int)payload->ack_rssi);
 
-		if (entry_data->key_type == P54_CRYPTO_TKIPMICHAEL) {
+		/* Undo all changes to the frame. */
+		switch (entry_data->key_type) {
+		case P54_CRYPTO_TKIPMICHAEL: {
 			u8 *iv = (u8 *)(entry_data->align + pad +
-				        entry_data->crypt_offset);
+					entry_data->crypt_offset);
 
 			/* Restore the original TKIP IV. */
 			iv[2] = iv[0];
 			iv[0] = iv[1];
 			iv[1] = (iv[0] | 0x20) & 0x7f;	/* WEPSeed - 8.3.2.2 */
+
+			frame_len -= 12; /* remove TKIP_MMIC + TKIP_ICV */
+			break;
+			}
+		case P54_CRYPTO_AESCCMP:
+			frame_len -= 8; /* remove CCMP_MIC */
+			break;
+		case P54_CRYPTO_WEP:
+			frame_len -= 4; /* remove WEP_ICV */
+			break;
 		}
+		skb_trim(entry, frame_len);
 		skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
 		ieee80211_tx_status_irqsafe(dev, entry);
 		goto out;
@@ -1147,7 +1161,7 @@ static int p54_set_tim(struct ieee80211_hw *dev, struct ieee80211_sta *sta,
 
 	skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET,
 		      sizeof(struct p54_hdr) + sizeof(*tim),
-		      P54_CONTROL_TYPE_TIM, GFP_KERNEL);
+		      P54_CONTROL_TYPE_TIM, GFP_ATOMIC);
 	if (!skb)
 		return -ENOMEM;
 
@@ -1610,7 +1624,7 @@ static int p54_scan(struct ieee80211_hw *dev, u16 mode, u16 dwell)
 
  err:
 	printk(KERN_ERR "%s: frequency change failed\n", wiphy_name(dev->wiphy));
-	kfree_skb(skb);
+	p54_free_skb(dev, skb);
 	return -EINVAL;
 }
 
@@ -2077,7 +2091,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
 			algo = P54_CRYPTO_AESCCMP;
 			break;
 		default:
-			return -EINVAL;
+			return -EOPNOTSUPP;
 		}
 	}
 
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 6a6a72f6f82..5de2ebfb28c 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -144,11 +144,8 @@ static void p54u_tx_cb(struct urb *urb)
 	struct sk_buff *skb = urb->context;
 	struct ieee80211_hw *dev = (struct ieee80211_hw *)
 		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
-	struct p54u_priv *priv = dev->priv;
 
-	skb_pull(skb, priv->common.tx_hdr_len);
-	if (FREE_AFTER_TX(skb))
-		p54_free_skb(dev, skb);
+	p54_free_skb(dev, skb);
 }
 
 static void p54u_tx_dummy_cb(struct urb *urb) { }
@@ -230,7 +227,10 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb)
 			  p54u_tx_dummy_cb, dev);
 	usb_fill_bulk_urb(data_urb, priv->udev,
 			  usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-			  skb->data, skb->len, p54u_tx_cb, skb);
+			  skb->data, skb->len, FREE_AFTER_TX(skb) ?
+			  p54u_tx_cb : p54u_tx_dummy_cb, skb);
+	addr_urb->transfer_flags |= URB_ZERO_PACKET;
+	data_urb->transfer_flags |= URB_ZERO_PACKET;
 
 	usb_anchor_urb(addr_urb, &priv->submitted);
 	err = usb_submit_urb(addr_urb, GFP_ATOMIC);
@@ -239,7 +239,7 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb)
 		goto out;
 	}
 
-	usb_anchor_urb(addr_urb, &priv->submitted);
+	usb_anchor_urb(data_urb, &priv->submitted);
 	err = usb_submit_urb(data_urb, GFP_ATOMIC);
 	if (err)
 		usb_unanchor_urb(data_urb);
@@ -269,28 +269,24 @@ static void p54u_tx_lm87(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
 	struct p54u_priv *priv = dev->priv;
 	struct urb *data_urb;
-	struct lm87_tx_hdr *hdr;
-	__le32 checksum;
-	__le32 addr = ((struct p54_hdr *)skb->data)->req_id;
+	struct lm87_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr);
 
 	data_urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!data_urb)
 		return;
 
-	checksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len);
-	hdr = (struct lm87_tx_hdr *)skb_push(skb, sizeof(*hdr));
-	hdr->chksum = checksum;
-	hdr->device_addr = addr;
+	hdr->chksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len);
+	hdr->device_addr = ((struct p54_hdr *)skb->data)->req_id;
 
 	usb_fill_bulk_urb(data_urb, priv->udev,
 			  usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-			  skb->data, skb->len, p54u_tx_cb, skb);
+			  hdr, skb->len + sizeof(*hdr),  FREE_AFTER_TX(skb) ?
+			  p54u_tx_cb : p54u_tx_dummy_cb, skb);
 	data_urb->transfer_flags |= URB_ZERO_PACKET;
 
 	usb_anchor_urb(data_urb, &priv->submitted);
 	if (usb_submit_urb(data_urb, GFP_ATOMIC)) {
 		usb_unanchor_urb(data_urb);
-		skb_pull(skb, sizeof(*hdr));
 		p54_free_skb(dev, skb);
 	}
 	usb_free_urb(data_urb);
@@ -300,11 +296,9 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
 	struct p54u_priv *priv = dev->priv;
 	struct urb *int_urb, *data_urb;
-	struct net2280_tx_hdr *hdr;
+	struct net2280_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr);
 	struct net2280_reg_write *reg;
 	int err = 0;
-	__le32 addr = ((struct p54_hdr *) skb->data)->req_id;
-	__le16 len = cpu_to_le16(skb->len);
 
 	reg = kmalloc(sizeof(*reg), GFP_ATOMIC);
 	if (!reg)
@@ -327,10 +321,9 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb)
 	reg->addr = cpu_to_le32(P54U_DEV_BASE);
 	reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA);
 
-	hdr = (void *)skb_push(skb, sizeof(*hdr));
 	memset(hdr, 0, sizeof(*hdr));
-	hdr->len = len;
-	hdr->device_addr = addr;
+	hdr->len = cpu_to_le16(skb->len);
+	hdr->device_addr = ((struct p54_hdr *) skb->data)->req_id;
 
 	usb_fill_bulk_urb(int_urb, priv->udev,
 		usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV), reg, sizeof(*reg),
@@ -341,11 +334,13 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb)
 	 * free what's inside the transfer_buffer after the callback routine
 	 * has completed.
 	 */
-	int_urb->transfer_flags |= URB_FREE_BUFFER;
+	int_urb->transfer_flags |= URB_FREE_BUFFER | URB_ZERO_PACKET;
 
 	usb_fill_bulk_urb(data_urb, priv->udev,
 			  usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-			  skb->data, skb->len, p54u_tx_cb, skb);
+			  hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ?
+			  p54u_tx_cb : p54u_tx_dummy_cb, skb);
+	data_urb->transfer_flags |= URB_ZERO_PACKET;
 
 	usb_anchor_urb(int_urb, &priv->submitted);
 	err = usb_submit_urb(int_urb, GFP_ATOMIC);
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 607ce9f61b5..ed93ac41297 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -1649,9 +1649,7 @@ static char *rndis_translate_scan(struct net_device *dev,
 				  char *end_buf,
 				  struct ndis_80211_bssid_ex *bssid)
 {
-#ifdef DEBUG
 	struct usbnet *usbdev = netdev_priv(dev);
-#endif
 	u8 *ie;
 	char *current_val;
 	int bssid_len, ie_len, i;
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 746a8f36b93..0709decec9c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -154,6 +154,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
+	struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
 	struct ieee80211_rate *rate =
 	    ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
 	const struct rt2x00_rate *hwrate;
@@ -313,7 +314,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 		 * When preamble is enabled we should set the
 		 * preamble bit for the signal.
 		 */
-		if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+		if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
 			txdesc->signal |= 0x08;
 	}
 }
diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
index c3f53a92180..3298cae1e12 100644
--- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c
+++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
@@ -162,7 +162,7 @@ void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
 
 void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
 {
-	if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->flags))
+	if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state))
 		return;
 
 	cancel_delayed_work_sync(&rt2x00dev->rfkill_work);
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 6ad6bac3770..22bc07ef2f3 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -273,6 +273,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 
 	usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep),
 			  buf, skb->len, rtl8187_tx_cb, skb);
+	urb->transfer_flags |= URB_ZERO_PACKET;
 	usb_anchor_urb(urb, &priv->anchored);
 	rc = usb_submit_urb(urb, GFP_ATOMIC);
 	if (rc < 0) {
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
index 4e75e8e7fa9..78df281b297 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
@@ -285,7 +285,10 @@ static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
 	ofdm_power = priv->channels[channel - 1].hw_value >> 4;
 
 	cck_power = min(cck_power, (u8)11);
-	ofdm_power = min(ofdm_power, (u8)35);
+	if (ofdm_power > (u8)15)
+		ofdm_power = 25;
+	else
+		ofdm_power += 10;
 
 	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
 			 rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1);
@@ -536,7 +539,10 @@ static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
 	cck_power += priv->txpwr_base & 0xF;
 	cck_power = min(cck_power, (u8)35);
 
-	ofdm_power = min(ofdm_power, (u8)15);
+	if (ofdm_power > (u8)15)
+		ofdm_power = 25;
+	else
+		ofdm_power += 10;
 	ofdm_power += priv->txpwr_base >> 4;
 	ofdm_power = min(ofdm_power, (u8)35);
 
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index b5db57d2fcf..17527f765b3 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -84,6 +84,7 @@ static struct usb_device_id usb_ids[] = {
 	{ USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
+	{ USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B },
 	/* "Driverless" devices that need ejecting */
 	{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
 	{ USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c
index 2e03b6d796d..e76d715e434 100644
--- a/drivers/oprofile/cpu_buffer.c
+++ b/drivers/oprofile/cpu_buffer.c
@@ -393,16 +393,21 @@ oprofile_write_reserve(struct op_entry *entry, struct pt_regs * const regs,
 	return;
 
 fail:
+	entry->event = NULL;
 	cpu_buf->sample_lost_overflow++;
 }
 
 int oprofile_add_data(struct op_entry *entry, unsigned long val)
 {
+	if (!entry->event)
+		return 0;
 	return op_cpu_buffer_add_data(entry, val);
 }
 
 int oprofile_write_commit(struct op_entry *entry)
 {
+	if (!entry->event)
+		return -EINVAL;
 	return op_cpu_buffer_write_commit(entry);
 }
 
diff --git a/drivers/oprofile/cpu_buffer.h b/drivers/oprofile/cpu_buffer.h
index 63f81c44846..272995d2029 100644
--- a/drivers/oprofile/cpu_buffer.h
+++ b/drivers/oprofile/cpu_buffer.h
@@ -66,6 +66,13 @@ static inline void op_cpu_buffer_reset(int cpu)
 	cpu_buf->last_task = NULL;
 }
 
+/*
+ * op_cpu_buffer_add_data() and op_cpu_buffer_write_commit() may be
+ * called only if op_cpu_buffer_write_reserve() did not return NULL or
+ * entry->event != NULL, otherwise entry->size or entry->event will be
+ * used uninitialized.
+ */
+
 struct op_sample
 *op_cpu_buffer_write_reserve(struct op_entry *entry, unsigned long size);
 int op_cpu_buffer_write_commit(struct op_entry *entry);
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index 3fac8f81d59..a70cf16ee1a 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -668,7 +668,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
  * @dev: instance of PCI owned by the driver that's asking
  * @mask:  number of address bits this PCI device can handle
  *
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
  */
 static int sba_dma_supported( struct device *dev, u64 mask)
 {
@@ -680,8 +680,8 @@ static int sba_dma_supported( struct device *dev, u64 mask)
 		return(0);
 	}
 
-	/* Documentation/DMA-mapping.txt tells drivers to try 64-bit first,
-	 * then fall back to 32-bit if that fails.
+	/* Documentation/PCI/PCI-DMA-mapping.txt tells drivers to try 64-bit
+	 * first, then fall back to 32-bit if that fails.
 	 * We are just "encouraging" 32-bit DMA masks here since we can
 	 * never allow IOMMU bypass unless we add special support for ZX1.
 	 */
@@ -706,7 +706,7 @@ static int sba_dma_supported( struct device *dev, u64 mask)
  * @size:  number of bytes to map in driver buffer.
  * @direction:  R/W or both.
  *
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
  */
 static dma_addr_t
 sba_map_single(struct device *dev, void *addr, size_t size,
@@ -785,7 +785,7 @@ sba_map_single(struct device *dev, void *addr, size_t size,
  * @size:  number of bytes mapped in driver buffer.
  * @direction:  R/W or both.
  *
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
  */
 static void
 sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
@@ -861,7 +861,7 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
  * @size:  number of bytes mapped in driver buffer.
  * @dma_handle:  IOVA of new buffer.
  *
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
  */
 static void *sba_alloc_consistent(struct device *hwdev, size_t size,
 					dma_addr_t *dma_handle, gfp_t gfp)
@@ -892,7 +892,7 @@ static void *sba_alloc_consistent(struct device *hwdev, size_t size,
  * @vaddr:  virtual address IOVA of "consistent" buffer.
  * @dma_handler:  IO virtual address of "consistent" buffer.
  *
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
  */
 static void
 sba_free_consistent(struct device *hwdev, size_t size, void *vaddr,
@@ -927,7 +927,7 @@ int dump_run_sg = 0;
  * @nents:  number of entries in list
  * @direction:  R/W or both.
  *
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
  */
 static int
 sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
@@ -1011,7 +1011,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
  * @nents:  number of entries in list
  * @direction:  R/W or both.
  *
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
  */
 static void 
 sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents,
diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile
index e31fb91652c..2aa117c8cd8 100644
--- a/drivers/pci/hotplug/Makefile
+++ b/drivers/pci/hotplug/Makefile
@@ -5,11 +5,15 @@
 obj-$(CONFIG_HOTPLUG_PCI)		+= pci_hotplug.o
 obj-$(CONFIG_HOTPLUG_PCI_COMPAQ)	+= cpqphp.o
 obj-$(CONFIG_HOTPLUG_PCI_IBM)		+= ibmphp.o
+
+# pciehp should be linked before acpiphp in order to allow the native driver
+# to attempt to bind first. We can then fall back to generic support.
+
+obj-$(CONFIG_HOTPLUG_PCI_PCIE)		+= pciehp.o
 obj-$(CONFIG_HOTPLUG_PCI_ACPI)		+= acpiphp.o
 obj-$(CONFIG_HOTPLUG_PCI_ACPI_IBM)	+= acpiphp_ibm.o
 obj-$(CONFIG_HOTPLUG_PCI_CPCI_ZT5550)	+= cpcihp_zt5550.o
 obj-$(CONFIG_HOTPLUG_PCI_CPCI_GENERIC)	+= cpcihp_generic.o
-obj-$(CONFIG_HOTPLUG_PCI_PCIE)		+= pciehp.o
 obj-$(CONFIG_HOTPLUG_PCI_SHPC)		+= shpchp.o
 obj-$(CONFIG_HOTPLUG_PCI_RPA)		+= rpaphp.o
 obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR)	+= rpadlpar_io.o
diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c
index b0e7de9e536..d8649e12729 100644
--- a/drivers/pci/hotplug/fakephp.c
+++ b/drivers/pci/hotplug/fakephp.c
@@ -195,13 +195,13 @@ static void remove_slot_worker(struct work_struct *work)
  * Tries hard not to re-enable already existing devices;
  * also handles scanning of subfunctions.
  */
-static void pci_rescan_slot(struct pci_dev *temp)
+static int pci_rescan_slot(struct pci_dev *temp)
 {
 	struct pci_bus *bus = temp->bus;
 	struct pci_dev *dev;
 	int func;
-	int retval;
 	u8 hdr_type;
+	int count = 0;
 
 	if (!pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type)) {
 		temp->hdr_type = hdr_type & 0x7f;
@@ -213,17 +213,12 @@ static void pci_rescan_slot(struct pci_dev *temp)
 				dbg("New device on %s function %x:%x\n",
 					bus->name, temp->devfn >> 3,
 					temp->devfn & 7);
-				retval = pci_bus_add_device(dev);
-				if (retval)
-					dev_err(&dev->dev, "error adding "
-						"device, continuing.\n");
-				else
-					add_slot(dev);
+				count++;
 			}
 		}
 		/* multifunction device? */
 		if (!(hdr_type & 0x80))
-			return;
+			return count;
 
 		/* continue scanning for other functions */
 		for (func = 1, temp->devfn++; func < 8; func++, temp->devfn++) {
@@ -239,16 +234,13 @@ static void pci_rescan_slot(struct pci_dev *temp)
 					dbg("New device on %s function %x:%x\n",
 						bus->name, temp->devfn >> 3,
 						temp->devfn & 7);
-					retval = pci_bus_add_device(dev);
-					if (retval)
-						dev_err(&dev->dev, "error adding "
-							"device, continuing.\n");
-					else
-						add_slot(dev);
+					count++;
 				}
 			}
 		}
 	}
+
+	return count;
 }
 
 
@@ -262,6 +254,8 @@ static void pci_rescan_bus(const struct pci_bus *bus)
 {
 	unsigned int devfn;
 	struct pci_dev *dev;
+	int retval;
+	int found = 0;
 	dev = alloc_pci_dev();
 	if (!dev)
 		return;
@@ -270,7 +264,23 @@ static void pci_rescan_bus(const struct pci_bus *bus)
 	dev->sysdata = bus->sysdata;
 	for (devfn = 0; devfn < 0x100; devfn += 8) {
 		dev->devfn = devfn;
-		pci_rescan_slot(dev);
+		found += pci_rescan_slot(dev);
+	}
+
+	if (found) {
+		pci_bus_assign_resources(bus);
+		list_for_each_entry(dev, &bus->devices, bus_list) {
+			/* Skip already-added devices */
+			if (dev->is_added)
+					continue;
+			retval = pci_bus_add_device(dev);
+			if (retval)
+				dev_err(&dev->dev,
+					"Error adding device, continuing\n");
+			else
+				add_slot(dev);
+		}
+		pci_bus_add_devices(bus);
 	}
 	kfree(dev);
 }
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 5482d4ed825..c2485542f54 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -126,8 +126,10 @@ static int set_lock_status(struct hotplug_slot *hotplug_slot, u8 status)
 	mutex_lock(&slot->ctrl->crit_sect);
 
 	/* has it been >1 sec since our last toggle? */
-	if ((get_seconds() - slot->last_emi_toggle) < 1)
+	if ((get_seconds() - slot->last_emi_toggle) < 1) {
+		mutex_unlock(&slot->ctrl->crit_sect);
 		return -EINVAL;
+	}
 
 	/* see what our current state is */
 	retval = get_lock_status(hotplug_slot, &value);
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index b4a90badd0a..44f15ff70c1 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -103,6 +103,16 @@ static void msix_set_enable(struct pci_dev *dev, int enable)
 	}
 }
 
+/*
+ * Essentially, this is ((1 << (1 << x)) - 1), but without the
+ * undefinedness of a << 32.
+ */
+static inline __attribute_const__ u32 msi_mask(unsigned x)
+{
+	static const u32 mask[] = { 1, 2, 4, 0xf, 0xff, 0xffff, 0xffffffff };
+	return mask[x];
+}
+
 static void msix_flush_writes(struct irq_desc *desc)
 {
 	struct msi_desc *entry;
@@ -398,21 +408,18 @@ static int msi_capability_init(struct pci_dev *dev)
 	entry->msi_attrib.masked = 1;
 	entry->msi_attrib.default_irq = dev->irq;	/* Save IOAPIC IRQ */
 	entry->msi_attrib.pos = pos;
-	if (entry->msi_attrib.maskbit) {
-		entry->mask_base = (void __iomem *)(long)msi_mask_bits_reg(pos,
-				entry->msi_attrib.is_64);
-	}
 	entry->dev = dev;
 	if (entry->msi_attrib.maskbit) {
-		unsigned int maskbits, temp;
+		unsigned int base, maskbits, temp;
+
+		base = msi_mask_bits_reg(pos, entry->msi_attrib.is_64);
+		entry->mask_base = (void __iomem *)(long)base;
+
 		/* All MSIs are unmasked by default, Mask them all */
-		pci_read_config_dword(dev,
-			msi_mask_bits_reg(pos, entry->msi_attrib.is_64),
-			&maskbits);
-		temp = (1 << multi_msi_capable(control));
-		temp = ((temp - 1) & ~temp);
+		pci_read_config_dword(dev, base, &maskbits);
+		temp = msi_mask((control & PCI_MSI_FLAGS_QMASK) >> 1);
 		maskbits |= temp;
-		pci_write_config_dword(dev, entry->msi_attrib.is_64, maskbits);
+		pci_write_config_dword(dev, base, maskbits);
 		entry->msi_attrib.maskbits_mask = temp;
 	}
 	list_add_tail(&entry->list, &dev->msi_list);
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index c697f268085..ab1d615425a 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -355,17 +355,28 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state)
 	int i = 0;
 
 	if (drv && drv->suspend) {
+		pci_dev->state_saved = false;
+
 		i = drv->suspend(pci_dev, state);
 		suspend_report_result(drv->suspend, i);
-	} else {
-		pci_save_state(pci_dev);
-		/*
-		 * This is for compatibility with existing code with legacy PM
-		 * support.
-		 */
-		pci_pm_set_unknown_state(pci_dev);
+		if (i)
+			return i;
+
+		if (pci_dev->state_saved)
+			goto Fixup;
+
+		if (WARN_ON_ONCE(pci_dev->current_state != PCI_D0))
+			goto Fixup;
 	}
 
+	pci_save_state(pci_dev);
+	pci_dev->state_saved = true;
+	/*
+	 * This is for compatibility with existing code with legacy PM support.
+	 */
+	pci_pm_set_unknown_state(pci_dev);
+
+ Fixup:
 	pci_fixup_device(pci_fixup_suspend, pci_dev);
 
 	return i;
@@ -386,81 +397,35 @@ static int pci_legacy_suspend_late(struct device *dev, pm_message_t state)
 
 static int pci_legacy_resume_early(struct device *dev)
 {
-	int error = 0;
 	struct pci_dev * pci_dev = to_pci_dev(dev);
 	struct pci_driver * drv = pci_dev->driver;
 
-	pci_fixup_device(pci_fixup_resume_early, pci_dev);
-
-	if (drv && drv->resume_early)
-		error = drv->resume_early(pci_dev);
-	return error;
+	return drv && drv->resume_early ?
+			drv->resume_early(pci_dev) : 0;
 }
 
 static int pci_legacy_resume(struct device *dev)
 {
-	int error;
 	struct pci_dev * pci_dev = to_pci_dev(dev);
 	struct pci_driver * drv = pci_dev->driver;
 
 	pci_fixup_device(pci_fixup_resume, pci_dev);
 
-	if (drv && drv->resume) {
-		error = drv->resume(pci_dev);
-	} else {
-		/* restore the PCI config space */
-		pci_restore_state(pci_dev);
-		error = pci_pm_reenable_device(pci_dev);
-	}
-	return error;
+	return drv && drv->resume ?
+			drv->resume(pci_dev) : pci_pm_reenable_device(pci_dev);
 }
 
 /* Auxiliary functions used by the new power management framework */
 
-static int pci_restore_standard_config(struct pci_dev *pci_dev)
-{
-	struct pci_dev *parent = pci_dev->bus->self;
-	int error = 0;
-
-	/* Check if the device's bus is operational */
-	if (!parent || parent->current_state == PCI_D0) {
-		pci_restore_state(pci_dev);
-		pci_update_current_state(pci_dev, PCI_D0);
-	} else {
-		dev_warn(&pci_dev->dev, "unable to restore config, "
-			"bridge %s in low power state D%d\n", pci_name(parent),
-			parent->current_state);
-		pci_dev->current_state = PCI_UNKNOWN;
-		error = -EAGAIN;
-	}
-
-	return error;
-}
-
-static bool pci_is_bridge(struct pci_dev *pci_dev)
-{
-	return !!(pci_dev->subordinate);
-}
-
 static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
 {
-	if (pci_restore_standard_config(pci_dev))
-		pci_fixup_device(pci_fixup_resume_early, pci_dev);
+	pci_restore_standard_config(pci_dev);
+	pci_dev->state_saved = false;
+	pci_fixup_device(pci_fixup_resume_early, pci_dev);
 }
 
 static int pci_pm_default_resume(struct pci_dev *pci_dev)
 {
-	/*
-	 * pci_restore_standard_config() should have been called once already,
-	 * but it would have failed if the device's parent bridge had not been
-	 * in power state D0 at that time.  Check it and try again if necessary.
-	 */
-	if (pci_dev->current_state == PCI_UNKNOWN) {
-		int error = pci_restore_standard_config(pci_dev);
-		if (error)
-			return error;
-	}
-
 	pci_fixup_device(pci_fixup_resume, pci_dev);
 
 	if (!pci_is_bridge(pci_dev))
@@ -575,11 +540,11 @@ static int pci_pm_resume_noirq(struct device *dev)
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
+	pci_pm_default_resume_noirq(pci_dev);
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume_early(dev);
 
-	pci_pm_default_resume_noirq(pci_dev);
-
 	if (drv && drv->pm && drv->pm->resume_noirq)
 		error = drv->pm->resume_noirq(dev);
 
@@ -592,6 +557,13 @@ static int pci_pm_resume(struct device *dev)
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
+	/*
+	 * This is necessary for the suspend error path in which resume is
+	 * called without restoring the standard config registers of the device.
+	 */
+	if (pci_dev->state_saved)
+		pci_restore_standard_config(pci_dev);
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume(dev);
 
@@ -697,7 +669,10 @@ static int pci_pm_poweroff(struct device *dev)
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_suspend(dev, PMSG_HIBERNATE);
 
-	if (drv && drv->pm && drv->pm->poweroff) {
+	if (!drv || !drv->pm)
+		return 0;
+
+	if (drv->pm->poweroff) {
 		error = drv->pm->poweroff(dev);
 		suspend_report_result(drv->pm->poweroff, error);
 	}
@@ -730,11 +705,11 @@ static int pci_pm_restore_noirq(struct device *dev)
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
+	pci_pm_default_resume_noirq(pci_dev);
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume_early(dev);
 
-	pci_pm_default_resume_noirq(pci_dev);
-
 	if (drv && drv->pm && drv->pm->restore_noirq)
 		error = drv->pm->restore_noirq(dev);
 
@@ -747,6 +722,13 @@ static int pci_pm_restore(struct device *dev)
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
+	/*
+	 * This is necessary for the hibernation error path in which restore is
+	 * called without restoring the standard config registers of the device.
+	 */
+	if (pci_dev->state_saved)
+		pci_restore_standard_config(pci_dev);
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume(dev);
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e491fdedf70..48807556b47 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -22,7 +22,7 @@
 #include <asm/dma.h>	/* isa_dma_bridge_buggy */
 #include "pci.h"
 
-unsigned int pci_pm_d3_delay = 10;
+unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT;
 
 #ifdef CONFIG_PCI_DOMAINS
 int pci_domains_supported = 1;
@@ -426,6 +426,7 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
  *                           given PCI device
  * @dev: PCI device to handle.
  * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
+ * @wait: If 'true', wait for the device to change its power state
  *
  * RETURN VALUE:
  * -EINVAL if the requested state is invalid.
@@ -435,7 +436,7 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
  * 0 if device's power state has been successfully changed.
  */
 static int
-pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
+pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
 {
 	u16 pmcsr;
 	bool need_restore = false;
@@ -480,8 +481,10 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 		break;
 	case PCI_UNKNOWN: /* Boot-up */
 		if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
-		 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
+		 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) {
 			need_restore = true;
+			wait = true;
+		}
 		/* Fall-through: force to D0 */
 	default:
 		pmcsr = 0;
@@ -491,12 +494,15 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 	/* enter specified state */
 	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
 
+	if (!wait)
+		return 0;
+
 	/* Mandatory power management transition delays */
 	/* see PCI PM 1.1 5.6.1 table 18 */
 	if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
 		msleep(pci_pm_d3_delay);
 	else if (state == PCI_D2 || dev->current_state == PCI_D2)
-		udelay(200);
+		udelay(PCI_PM_D2_DELAY);
 
 	dev->current_state = state;
 
@@ -515,7 +521,7 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 	if (need_restore)
 		pci_restore_bars(dev);
 
-	if (dev->bus->self)
+	if (wait && dev->bus->self)
 		pcie_aspm_pm_state_change(dev->bus->self);
 
 	return 0;
@@ -585,7 +591,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 	if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
 		return 0;
 
-	error = pci_raw_set_power_state(dev, state);
+	error = pci_raw_set_power_state(dev, state, true);
 
 	if (state > PCI_D0 && platform_pci_power_manageable(dev)) {
 		/* Allow the platform to finalize the transition */
@@ -730,6 +736,7 @@ pci_save_state(struct pci_dev *dev)
 	/* XXX: 100% dword access ok here? */
 	for (i = 0; i < 16; i++)
 		pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]);
+	dev->state_saved = true;
 	if ((i = pci_save_pcie_state(dev)) != 0)
 		return i;
 	if ((i = pci_save_pcix_state(dev)) != 0)
@@ -1374,6 +1381,50 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev)
 }
 
 /**
+ * pci_restore_standard_config - restore standard config registers of PCI device
+ * @dev: PCI device to handle
+ *
+ * This function assumes that the device's configuration space is accessible.
+ * If the device needs to be powered up, the function will wait for it to
+ * change the state.
+ */
+int pci_restore_standard_config(struct pci_dev *dev)
+{
+	pci_power_t prev_state;
+	int error;
+
+	pci_update_current_state(dev, PCI_D0);
+
+	prev_state = dev->current_state;
+	if (prev_state == PCI_D0)
+		goto Restore;
+
+	error = pci_raw_set_power_state(dev, PCI_D0, false);
+	if (error)
+		return error;
+
+	/*
+	 * This assumes that we won't get a bus in B2 or B3 from the BIOS, but
+	 * we've made this assumption forever and it appears to be universally
+	 * satisfied.
+	 */
+	switch(prev_state) {
+	case PCI_D3cold:
+	case PCI_D3hot:
+		mdelay(pci_pm_d3_delay);
+		break;
+	case PCI_D2:
+		udelay(PCI_PM_D2_DELAY);
+		break;
+	}
+
+	dev->current_state = PCI_D0;
+
+ Restore:
+	return pci_restore_state(dev);
+}
+
+/**
  * pci_enable_ari - enable ARI forwarding if hardware support it
  * @dev: the PCI device
  */
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 1351bb4addd..26ddf78ac30 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -49,6 +49,12 @@ extern void pci_disable_enabled_device(struct pci_dev *dev);
 extern void pci_pm_init(struct pci_dev *dev);
 extern void platform_pci_wakeup_init(struct pci_dev *dev);
 extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);
+extern int pci_restore_standard_config(struct pci_dev *dev);
+
+static inline bool pci_is_bridge(struct pci_dev *pci_dev)
+{
+	return !!(pci_dev->subordinate);
+}
 
 extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
 extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 7c789f0a94d..f41135f2fb2 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -382,6 +382,11 @@ static int __init hp_wmi_input_setup(void)
 		case KE_SW:
 			set_bit(EV_SW, hp_wmi_input_dev->evbit);
 			set_bit(key->keycode, hp_wmi_input_dev->swbit);
+
+			/* Set initial dock state */
+			input_report_switch(hp_wmi_input_dev, key->keycode,
+					    hp_wmi_dock_state());
+			input_sync(hp_wmi_input_dev);
 			break;
 		}
 	}
@@ -441,6 +446,7 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 		bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set;
 		bluetooth_rfkill->user_claim_unsupported = 1;
 		err = rfkill_register(bluetooth_rfkill);
+		if (err)
 			goto register_bluetooth_error;
 	}
 
@@ -457,9 +463,11 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 
 	return 0;
 register_wwan_err:
-	rfkill_unregister(bluetooth_rfkill);
+	if (bluetooth_rfkill)
+		rfkill_unregister(bluetooth_rfkill);
 register_bluetooth_error:
-	rfkill_unregister(wifi_rfkill);
+	if (wifi_rfkill)
+		rfkill_unregister(wifi_rfkill);
 add_sysfs_error:
 	cleanup_sysfs(device);
 	return err;
diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
index d30bb766fce..b56a704409d 100644
--- a/drivers/power/pda_power.c
+++ b/drivers/power/pda_power.c
@@ -20,7 +20,7 @@
 
 static inline unsigned int get_irq_flags(struct resource *res)
 {
-	unsigned int flags = IRQF_DISABLED | IRQF_SHARED;
+	unsigned int flags = IRQF_SAMPLE_RANDOM | IRQF_SHARED;
 
 	flags |= res->flags & IRQF_TRIGGER_MASK;
 
diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c
index 366565aba86..c175e38a4cd 100644
--- a/drivers/regulator/bq24022.c
+++ b/drivers/regulator/bq24022.c
@@ -152,11 +152,7 @@ static void __exit bq24022_exit(void)
 	platform_driver_unregister(&bq24022_driver);
 }
 
-/*
- * make sure this is probed before gpio_vbus and pda_power,
- * but after asic3 or other GPIO expander drivers.
- */
-subsys_initcall(bq24022_init);
+module_init(bq24022_init);
 module_exit(bq24022_exit);
 
 MODULE_AUTHOR("Philipp Zabel");
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index 7aa35248181..5056e23e441 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -1435,7 +1435,7 @@ int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink,
 	struct platform_device *pdev;
 	int ret;
 
-	if (lednum > ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) {
+	if (lednum >= ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) {
 		dev_err(wm8350->dev, "Invalid LED index %d\n", lednum);
 		return -ENODEV;
 	}
diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c
index 48b372e038a..56e23d44ba5 100644
--- a/drivers/regulator/wm8400-regulator.c
+++ b/drivers/regulator/wm8400-regulator.c
@@ -289,7 +289,7 @@ static struct regulator_desc regulators[] = {
 	},
 };
 
-static int __init wm8400_regulator_probe(struct platform_device *pdev)
+static int __devinit wm8400_regulator_probe(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev;
 
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index cced4d10831..81450fbd8b1 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -241,6 +241,12 @@ config RTC_DRV_M41T80_WDT
 	  If you say Y here you will get support for the
 	  watchdog timer in the ST M41T60 and M41T80 RTC chips series.
 
+config RTC_DRV_DM355EVM
+	tristate "TI DaVinci DM355 EVM RTC"
+	depends on MFD_DM355EVM_MSP
+	help
+	  Supports the RTC firmware in the MSP430 on the DM355 EVM.
+
 config RTC_DRV_TWL92330
 	boolean "TI TWL92330/Menelaus"
 	depends on MENELAUS
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 6e28021abb9..0e697aa51ca 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_RTC_DRV_AT91SAM9)	+= rtc-at91sam9.o
 obj-$(CONFIG_RTC_DRV_AU1XXX)	+= rtc-au1xxx.o
 obj-$(CONFIG_RTC_DRV_BFIN)	+= rtc-bfin.o
 obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc-cmos.o
+obj-$(CONFIG_RTC_DRV_DM355EVM)	+= rtc-dm355evm.o
 obj-$(CONFIG_RTC_DRV_DS1216)	+= rtc-ds1216.o
 obj-$(CONFIG_RTC_DRV_DS1286)	+= rtc-ds1286.o
 obj-$(CONFIG_RTC_DRV_DS1302)	+= rtc-ds1302.o
diff --git a/drivers/rtc/rtc-dm355evm.c b/drivers/rtc/rtc-dm355evm.c
new file mode 100644
index 00000000000..58d4e18530d
--- /dev/null
+++ b/drivers/rtc/rtc-dm355evm.c
@@ -0,0 +1,175 @@
+/*
+ * rtc-dm355evm.c - access battery-backed counter in MSP430 firmware
+ *
+ * Copyright (c) 2008 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+
+#include <linux/i2c/dm355evm_msp.h>
+
+
+/*
+ * The MSP430 firmware on the DM355 EVM uses a watch crystal to feed
+ * a 1 Hz counter.  When a backup battery is supplied, that makes a
+ * reasonable RTC for applications where alarms and non-NTP drift
+ * compensation aren't important.
+ *
+ * The only real glitch is the inability to read or write all four
+ * counter bytes atomically:  the count may increment in the middle
+ * of an operation, causing trouble when the LSB rolls over.
+ *
+ * This driver was tested with firmware revision A4.
+ */
+union evm_time {
+	u8	bytes[4];
+	u32	value;
+};
+
+static int dm355evm_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	union evm_time	time;
+	int		status;
+	int		tries = 0;
+
+	do {
+		/*
+		 * Read LSB(0) to MSB(3) bytes.  Defend against the counter
+		 * rolling over by re-reading until the value is stable,
+		 * and assuming the four reads take at most a few seconds.
+		 */
+		status = dm355evm_msp_read(DM355EVM_MSP_RTC_0);
+		if (status < 0)
+			return status;
+		if (tries && time.bytes[0] == status)
+			break;
+		time.bytes[0] = status;
+
+		status = dm355evm_msp_read(DM355EVM_MSP_RTC_1);
+		if (status < 0)
+			return status;
+		if (tries && time.bytes[1] == status)
+			break;
+		time.bytes[1] = status;
+
+		status = dm355evm_msp_read(DM355EVM_MSP_RTC_2);
+		if (status < 0)
+			return status;
+		if (tries && time.bytes[2] == status)
+			break;
+		time.bytes[2] = status;
+
+		status = dm355evm_msp_read(DM355EVM_MSP_RTC_3);
+		if (status < 0)
+			return status;
+		if (tries && time.bytes[3] == status)
+			break;
+		time.bytes[3] = status;
+
+	} while (++tries < 5);
+
+	dev_dbg(dev, "read timestamp %08x\n", time.value);
+
+	rtc_time_to_tm(le32_to_cpu(time.value), tm);
+	return 0;
+}
+
+static int dm355evm_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	union evm_time	time;
+	unsigned long	value;
+	int		status;
+
+	rtc_tm_to_time(tm, &value);
+	time.value = cpu_to_le32(value);
+
+	dev_dbg(dev, "write timestamp %08x\n", time.value);
+
+	/*
+	 * REVISIT handle non-atomic writes ... maybe just retry until
+	 * byte[1] sticks (no rollover)?
+	 */
+	status = dm355evm_msp_write(time.bytes[0], DM355EVM_MSP_RTC_0);
+	if (status < 0)
+		return status;
+
+	status = dm355evm_msp_write(time.bytes[1], DM355EVM_MSP_RTC_1);
+	if (status < 0)
+		return status;
+
+	status = dm355evm_msp_write(time.bytes[2], DM355EVM_MSP_RTC_2);
+	if (status < 0)
+		return status;
+
+	status = dm355evm_msp_write(time.bytes[3], DM355EVM_MSP_RTC_3);
+	if (status < 0)
+		return status;
+
+	return 0;
+}
+
+static struct rtc_class_ops dm355evm_rtc_ops = {
+	.read_time	= dm355evm_rtc_read_time,
+	.set_time	= dm355evm_rtc_set_time,
+};
+
+/*----------------------------------------------------------------------*/
+
+static int __devinit dm355evm_rtc_probe(struct platform_device *pdev)
+{
+	struct rtc_device *rtc;
+
+	rtc = rtc_device_register(pdev->name,
+				  &pdev->dev, &dm355evm_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc)) {
+		dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
+			PTR_ERR(rtc));
+		return PTR_ERR(rtc);
+	}
+	platform_set_drvdata(pdev, rtc);
+
+	return 0;
+}
+
+static int __devexit dm355evm_rtc_remove(struct platform_device *pdev)
+{
+	struct rtc_device *rtc = platform_get_drvdata(pdev);
+
+	rtc_device_unregister(rtc);
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+/*
+ * I2C is used to talk to the MSP430, but this platform device is
+ * exposed by an MFD driver that manages I2C communications.
+ */
+static struct platform_driver rtc_dm355evm_driver = {
+	.probe		= dm355evm_rtc_probe,
+	.remove		= __devexit_p(dm355evm_rtc_remove),
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "rtc-dm355evm",
+	},
+};
+
+static int __init dm355evm_rtc_init(void)
+{
+	return platform_driver_register(&rtc_dm355evm_driver);
+}
+module_init(dm355evm_rtc_init);
+
+static void __exit dm355evm_rtc_exit(void)
+{
+	platform_driver_unregister(&rtc_dm355evm_driver);
+}
+module_exit(dm355evm_rtc_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-ds1390.c b/drivers/rtc/rtc-ds1390.c
index e54b5c619bd..e01b955db07 100644
--- a/drivers/rtc/rtc-ds1390.c
+++ b/drivers/rtc/rtc-ds1390.c
@@ -122,7 +122,6 @@ static const struct rtc_class_ops ds1390_rtc_ops = {
 
 static int __devinit ds1390_probe(struct spi_device *spi)
 {
-	struct rtc_device *rtc;
 	unsigned char tmp;
 	struct ds1390 *chip;
 	int res;
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index acca6678cb2..49c3bfa1afd 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -70,7 +70,9 @@ static char debug_buffer[255];
 static void lcs_tasklet(unsigned long);
 static void lcs_start_kernel_thread(struct work_struct *);
 static void lcs_get_frames_cb(struct lcs_channel *, struct lcs_buffer *);
+#ifdef CONFIG_IP_MULTICAST
 static int lcs_send_delipm(struct lcs_card *, struct lcs_ipm_list *);
+#endif /* CONFIG_IP_MULTICAST */
 static int lcs_recovery(void *ptr);
 
 /**
@@ -1285,6 +1287,8 @@ out:
 	lcs_clear_thread_running_bit(card, LCS_SET_MC_THREAD);
 	return 0;
 }
+#endif /* CONFIG_IP_MULTICAST */
+
 /**
  * function called by net device to
  * handle multicast address relevant things
@@ -1292,6 +1296,7 @@ out:
 static void
 lcs_set_multicast_list(struct net_device *dev)
 {
+#ifdef CONFIG_IP_MULTICAST
         struct lcs_card *card;
 
         LCS_DBF_TEXT(4, trace, "setmulti");
@@ -1299,9 +1304,8 @@ lcs_set_multicast_list(struct net_device *dev)
 
         if (!lcs_set_thread_start_bit(card, LCS_SET_MC_THREAD))
 		schedule_work(&card->kernel_thread_starter);
-}
-
 #endif /* CONFIG_IP_MULTICAST */
+}
 
 static long
 lcs_check_irb_error(struct ccw_device *cdev, struct irb *irb)
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c
index 68a64123af8..8ee01b90733 100644
--- a/drivers/scsi/arm/cumana_2.c
+++ b/drivers/scsi/arm/cumana_2.c
@@ -390,7 +390,8 @@ static struct scsi_host_template cumanascsi2_template = {
 	.eh_abort_handler		= fas216_eh_abort,
 	.can_queue			= 1,
 	.this_id			= 7,
-	.sg_tablesize			= SG_ALL,
+	.sg_tablesize			= SCSI_MAX_SG_CHAIN_SEGMENTS,
+	.dma_boundary			= IOMD_DMA_BOUNDARY,
 	.cmd_per_lun			= 1,
 	.use_clustering			= DISABLE_CLUSTERING,
 	.proc_name			= "cumanascsi2",
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c
index bb2477b3fb0..d8435132f46 100644
--- a/drivers/scsi/arm/eesox.c
+++ b/drivers/scsi/arm/eesox.c
@@ -508,7 +508,8 @@ static struct scsi_host_template eesox_template = {
 	.eh_abort_handler		= fas216_eh_abort,
 	.can_queue			= 1,
 	.this_id			= 7,
-	.sg_tablesize			= SG_ALL,
+	.sg_tablesize			= SCSI_MAX_SG_CHAIN_SEGMENTS,
+	.dma_boundary			= IOMD_DMA_BOUNDARY,
 	.cmd_per_lun			= 1,
 	.use_clustering			= DISABLE_CLUSTERING,
 	.proc_name			= "eesox",
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c
index d9a546d1917..e2297b4c1b9 100644
--- a/drivers/scsi/arm/powertec.c
+++ b/drivers/scsi/arm/powertec.c
@@ -302,7 +302,8 @@ static struct scsi_host_template powertecscsi_template = {
 
 	.can_queue			= 8,
 	.this_id			= 7,
-	.sg_tablesize			= SG_ALL,
+	.sg_tablesize			= SCSI_MAX_SG_CHAIN_SEGMENTS,
+	.dma_boundary			= IOMD_DMA_BOUNDARY,
 	.cmd_per_lun			= 2,
 	.use_clustering			= ENABLE_CLUSTERING,
 	.proc_name			= "powertec",
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 91ef669d98f..a1a511bdec8 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -1322,7 +1322,9 @@ static int ibmvfc_map_sg_data(struct scsi_cmnd *scmd,
 					       &evt->ext_list_token);
 
 		if (!evt->ext_list) {
-			scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n");
+			scsi_dma_unmap(scmd);
+			if (vhost->log_level > IBMVFC_DEFAULT_LOG_LEVEL)
+				scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n");
 			return -ENOMEM;
 		}
 	}
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 7225b6e2029..257c24115de 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1981,6 +1981,7 @@ void iscsi_pool_free(struct iscsi_pool *q)
 		kfree(q->pool[i]);
 	if (q->pool)
 		kfree(q->pool);
+	kfree(q->queue);
 }
 EXPORT_SYMBOL_GPL(iscsi_pool_free);
 
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index c7acef50d5d..33a3c13fd89 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1016,6 +1016,9 @@ qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport)
 	struct Scsi_Host *host = rport_to_shost(rport);
 	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
 
+	if (!fcport)
+		return;
+
 	qla2x00_abort_fcport_cmds(fcport);
 
 	/*
@@ -1033,6 +1036,9 @@ qla2x00_terminate_rport_io(struct fc_rport *rport)
 {
 	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
 
+	if (!fcport)
+		return;
+
 	/*
 	 * At this point all fcport's software-states are cleared.  Perform any
 	 * final cleanup of firmware resources (PCBs and XCBs).
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index ba491335375..a336b4bc81a 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -34,6 +34,7 @@ extern void qla24xx_update_fw_options(scsi_qla_host_t *);
 extern void qla81xx_update_fw_options(scsi_qla_host_t *);
 extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *);
 extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *);
+extern int qla81xx_load_risc(scsi_qla_host_t *, uint32_t *);
 
 extern int qla2x00_loop_resync(scsi_qla_host_t *);
 
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 9ad4d0968e5..f6368a1d302 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3562,6 +3562,9 @@ qla24xx_reset_adapter(scsi_qla_host_t *vha)
 	WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
 	RD_REG_DWORD(&reg->hccr);
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+	if (IS_NOPOLLING_TYPE(ha))
+		ha->isp_ops->enable_intrs(ha);
 }
 
 /* On sparc systems, obtain port and node WWN from firmware
@@ -3847,6 +3850,10 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 	uint32_t i;
 	struct qla_hw_data *ha = vha->hw;
 	struct req_que *req = ha->req_q_map[0];
+
+	qla_printk(KERN_INFO, ha,
+	    "FW: Loading from flash (%x)...\n", ha->flt_region_fw);
+
 	rval = QLA_SUCCESS;
 
 	segments = FA_RISC_CODE_SEGMENTS;
@@ -4022,8 +4029,8 @@ fail_fw_integrity:
 	return QLA_FUNCTION_FAILED;
 }
 
-int
-qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+static int
+qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 {
 	int	rval;
 	int	segments, fragment;
@@ -4043,12 +4050,12 @@ qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 		qla_printk(KERN_ERR, ha, "Firmware images can be retrieved "
 		    "from: " QLA_FW_URL ".\n");
 
-		/* Try to load RISC code from flash. */
-		qla_printk(KERN_ERR, ha, "Attempting to load (potentially "
-		    "outdated) firmware from flash.\n");
-		return qla24xx_load_risc_flash(vha, srisc_addr);
+		return QLA_FUNCTION_FAILED;
 	}
 
+	qla_printk(KERN_INFO, ha,
+	    "FW: Loading via request-firmware...\n");
+
 	rval = QLA_SUCCESS;
 
 	segments = FA_RISC_CODE_SEGMENTS;
@@ -4133,6 +4140,40 @@ fail_fw_integrity:
 	return QLA_FUNCTION_FAILED;
 }
 
+int
+qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+{
+	int rval;
+
+	/*
+	 * FW Load priority:
+	 * 1) Firmware via request-firmware interface (.bin file).
+	 * 2) Firmware residing in flash.
+	 */
+	rval = qla24xx_load_risc_blob(vha, srisc_addr);
+	if (rval == QLA_SUCCESS)
+		return rval;
+
+	return qla24xx_load_risc_flash(vha, srisc_addr);
+}
+
+int
+qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+{
+	int rval;
+
+	/*
+	 * FW Load priority:
+	 * 1) Firmware residing in flash.
+	 * 2) Firmware via request-firmware interface (.bin file).
+	 */
+	rval = qla24xx_load_risc_flash(vha, srisc_addr);
+	if (rval == QLA_SUCCESS)
+		return rval;
+
+	return qla24xx_load_risc_blob(vha, srisc_addr);
+}
+
 void
 qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha)
 {
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 789fc576f22..e28ad81baf1 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1868,6 +1868,7 @@ qla24xx_disable_msix(struct qla_hw_data *ha)
 static int
 qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
 {
+#define MIN_MSIX_COUNT	2
 	int i, ret;
 	struct msix_entry *entries;
 	struct qla_msix_entry *qentry;
@@ -1883,12 +1884,16 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
 
 	ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
 	if (ret) {
+		if (ret < MIN_MSIX_COUNT)
+			goto msix_failed;
+
 		qla_printk(KERN_WARNING, ha,
 			"MSI-X: Failed to enable support -- %d/%d\n"
 			" Retry with %d vectors\n", ha->msix_count, ret, ret);
 		ha->msix_count = ret;
 		ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
 		if (ret) {
+msix_failed:
 			qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable"
 				" support, giving up -- %d/%d\n",
 				ha->msix_count, ret);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index db4df45234a..f94ffbb98e9 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -58,14 +58,11 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 	 * seconds. This is to serialize actual issuing of mailbox cmds during
 	 * non ISP abort time.
 	 */
-	if (!abort_active) {
-		if (!wait_for_completion_timeout(&ha->mbx_cmd_comp,
-		    mcp->tov * HZ)) {
-			/* Timeout occurred. Return error. */
-			DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
-			    "Exiting.\n", __func__, base_vha->host_no));
-			return QLA_FUNCTION_TIMEOUT;
-		}
+	if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, mcp->tov * HZ)) {
+		/* Timeout occurred. Return error. */
+		DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
+		    "Exiting.\n", __func__, base_vha->host_no));
+		return QLA_FUNCTION_TIMEOUT;
 	}
 
 	ha->flags.mbox_busy = 1;
@@ -265,8 +262,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 	}
 
 	/* Allow next mbx cmd to come in. */
-	if (!abort_active)
-		complete(&ha->mbx_cmd_comp);
+	complete(&ha->mbx_cmd_comp);
 
 	if (rval) {
 		DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, "
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index cf32653fe01..c11f872d3e1 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -65,8 +65,6 @@ MODULE_PARM_DESC(ql2xextended_error_logging,
 
 static void qla2x00_free_device(scsi_qla_host_t *);
 
-static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
-
 int ql2xfdmienable=1;
 module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
 MODULE_PARM_DESC(ql2xfdmienable,
@@ -800,6 +798,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 		if (ha->isp_ops->abort_command(vha, sp, req)) {
 			DEBUG2(printk("%s(%ld): abort_command "
 			"mbx failed.\n", __func__, vha->host_no));
+			ret = FAILED;
 		} else {
 			DEBUG3(printk("%s(%ld): abort_command "
 			"mbx success.\n", __func__, vha->host_no));
@@ -1241,9 +1240,8 @@ qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
  * supported addressing method.
  */
 static void
-qla2x00_config_dma_addressing(scsi_qla_host_t *vha)
+qla2x00_config_dma_addressing(struct qla_hw_data *ha)
 {
-	struct qla_hw_data *ha = vha->hw;
 	/* Assume a 32bit DMA mask. */
 	ha->flags.enable_64bit_addressing = 0;
 
@@ -1480,7 +1478,7 @@ static struct isp_operations qla81xx_isp_ops = {
 	.reset_adapter		= qla24xx_reset_adapter,
 	.nvram_config		= qla81xx_nvram_config,
 	.update_fw_options	= qla81xx_update_fw_options,
-	.load_risc		= qla24xx_load_risc,
+	.load_risc		= qla81xx_load_risc,
 	.pci_info_str		= qla24xx_pci_info_str,
 	.fw_version_str		= qla24xx_fw_version_str,
 	.intr_handler		= qla24xx_intr_handler,
@@ -1869,6 +1867,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	set_bit(0, (unsigned long *) ha->vp_idx_map);
 
+	qla2x00_config_dma_addressing(ha);
 	ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp);
 	if (!ret) {
 		qla_printk(KERN_WARNING, ha,
@@ -1888,13 +1887,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		    "[ERROR] Failed to allocate memory for scsi_host\n");
 
 		ret = -ENOMEM;
+		qla2x00_mem_free(ha);
+		qla2x00_free_que(ha, req, rsp);
 		goto probe_hw_failed;
 	}
 
 	pci_set_drvdata(pdev, base_vha);
 
-	qla2x00_config_dma_addressing(base_vha);
-
 	host = base_vha->host;
 	base_vha->req_ques[0] = req->id;
 	host->can_queue = req->length + 128;
@@ -1917,14 +1916,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* Set up the irqs */
 	ret = qla2x00_request_irqs(ha, rsp);
 	if (ret)
-		goto probe_failed;
-
+		goto probe_init_failed;
 	/* Alloc arrays of request and response ring ptrs */
 	if (!qla2x00_alloc_queues(ha)) {
 		qla_printk(KERN_WARNING, ha,
 		"[ERROR] Failed to allocate memory for queue"
 		" pointers\n");
-		goto probe_failed;
+		goto probe_init_failed;
 	}
 	ha->rsp_q_map[0] = rsp;
 	ha->req_q_map[0] = req;
@@ -1997,6 +1995,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	return 0;
 
+probe_init_failed:
+	qla2x00_free_que(ha, req, rsp);
+	ha->max_queues = 0;
+
 probe_failed:
 	qla2x00_free_device(base_vha);
 
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 303f8ee11f2..9c3b694c049 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -944,9 +944,9 @@ qla24xx_unprotect_flash(struct qla_hw_data *ha)
 	if (!ha->fdt_wrt_disable)
 		return;
 
-	/* Disable flash write-protection. */
+	/* Disable flash write-protection, first clear SR protection bit */
 	qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
-	/* Some flash parts need an additional zero-write to clear bits.*/
+	/* Then write zero again to clear remaining SR bits.*/
 	qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
 }
 
@@ -980,12 +980,11 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
     uint32_t dwords)
 {
 	int ret;
-	uint32_t liter, miter;
+	uint32_t liter;
 	uint32_t sec_mask, rest_addr;
-	uint32_t fdata, findex;
+	uint32_t fdata;
 	dma_addr_t optrom_dma;
 	void *optrom = NULL;
-	uint32_t *s, *d;
 	struct qla_hw_data *ha = vha->hw;
 
 	ret = QLA_SUCCESS;
@@ -1003,17 +1002,15 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
 	}
 
 	rest_addr = (ha->fdt_block_size >> 2) - 1;
-	sec_mask = (ha->optrom_size >> 2) - (ha->fdt_block_size >> 2);
+	sec_mask = ~rest_addr;
 
 	qla24xx_unprotect_flash(ha);
 
 	for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
-
-		findex = faddr;
-		fdata = (findex & sec_mask) << 2;
+		fdata = (faddr & sec_mask) << 2;
 
 		/* Are we at the beginning of a sector? */
-		if ((findex & rest_addr) == 0) {
+		if ((faddr & rest_addr) == 0) {
 			/* Do sector unprotect. */
 			if (ha->fdt_unprotect_sec_cmd)
 				qla24xx_write_flash_dword(ha,
@@ -1024,7 +1021,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
 			    (fdata & 0xff00) |((fdata << 16) &
 			    0xff0000) | ((fdata >> 16) & 0xff));
 			if (ret != QLA_SUCCESS) {
-				DEBUG9(qla_printk("Unable to flash sector: "
+				DEBUG9(qla_printk("Unable to erase sector: "
 				    "address=%x.\n", faddr));
 				break;
 			}
@@ -1033,9 +1030,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
 		/* Go with burst-write. */
 		if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) {
 			/* Copy data to DMA'ble buffer. */
-			for (miter = 0, s = optrom, d = dwptr;
-			    miter < OPTROM_BURST_DWORDS; miter++, s++, d++)
-				*s = cpu_to_le32(*d);
+			memcpy(optrom, dwptr, OPTROM_BURST_SIZE);
 
 			ret = qla2x00_load_ram(vha, optrom_dma,
 			    flash_data_addr(ha, faddr),
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 808bab6ef06..cfa4c11a479 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.00-k1"
+#define QLA2XXX_VERSION      "8.03.00-k2"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index d6be0762eb9..b586f27c3bd 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -244,6 +244,7 @@ struct ddb_entry {
 	uint8_t ip_addr[ISCSI_IPADDR_SIZE];
 	uint8_t iscsi_name[ISCSI_NAME_SIZE];	/* 72 x48 */
 	uint8_t iscsi_alias[0x20];
+	uint8_t isid[6];
 };
 
 /*
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 109c5f5985e..af8c3233e8a 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -342,8 +342,12 @@ static struct ddb_entry* qla4xxx_get_ddb_entry(struct scsi_qla_host *ha,
 	DEBUG2(printk("scsi%ld: %s: Looking for ddb[%d]\n", ha->host_no,
 		      __func__, fw_ddb_index));
 	list_for_each_entry(ddb_entry, &ha->ddb_list, list) {
-		if (memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name,
-			   ISCSI_NAME_SIZE) == 0) {
+		if ((memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name,
+			   ISCSI_NAME_SIZE) == 0) &&
+			(ddb_entry->tpgt ==
+				le32_to_cpu(fw_ddb_entry->tgt_portal_grp)) &&
+			(memcmp(ddb_entry->isid, fw_ddb_entry->isid,
+				sizeof(ddb_entry->isid)) == 0)) {
 			found++;
 			break;
 		}
@@ -430,6 +434,8 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha,
 
 	ddb_entry->port = le16_to_cpu(fw_ddb_entry->port);
 	ddb_entry->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp);
+	memcpy(ddb_entry->isid, fw_ddb_entry->isid, sizeof(ddb_entry->isid));
+
 	memcpy(&ddb_entry->iscsi_name[0], &fw_ddb_entry->iscsi_name[0],
 	       min(sizeof(ddb_entry->iscsi_name),
 		   sizeof(fw_ddb_entry->iscsi_name)));
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 2a3671233b1..536d8e510f6 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -806,6 +806,8 @@ pci_default_setup(struct serial_private *priv,
 #define PCI_SUBDEVICE_ID_OCTPRO422	0x0208
 #define PCI_SUBDEVICE_ID_POCTAL232	0x0308
 #define PCI_SUBDEVICE_ID_POCTAL422	0x0408
+#define PCI_VENDOR_ID_ADVANTECH		0x13fe
+#define PCI_DEVICE_ID_ADVANTECH_PCI3620	0x3620
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
@@ -2152,6 +2154,10 @@ static int pciserial_resume_one(struct pci_dev *dev)
 #endif
 
 static struct pci_device_id serial_pci_tbl[] = {
+	/* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */
+	{	PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
+		PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0,
+		pbn_b2_8_921600 },
 	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
 		PCI_SUBVENDOR_ID_CONNECT_TECH,
 		PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 3e525e38a5d..7d7f576da20 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -982,7 +982,7 @@ config SERIAL_SH_SCI_CONSOLE
 
 config SERIAL_PNX8XXX
 	bool "Enable PNX8XXX SoCs' UART Support"
-	depends on MIPS && SOC_PNX8550
+	depends on MIPS && (SOC_PNX8550 || SOC_PNX833X)
 	select SERIAL_CORE
 	help
 	  If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 338cf8a08b4..92187e28608 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -180,7 +180,7 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	return rc;
 }
 
-static void jsm_remove_one(struct pci_dev *pdev)
+static void __devexit jsm_remove_one(struct pci_dev *pdev)
 {
 	struct jsm_board *brd = pci_get_drvdata(pdev);
 	int i = 0;
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 3547558d2ca..324c74d2f66 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -161,6 +161,11 @@ static void jsm_tty_stop_rx(struct uart_port *port)
 	channel->ch_bd->bd_ops->disable_receiver(channel);
 }
 
+static void jsm_tty_enable_ms(struct uart_port *port)
+{
+	/* Nothing needed */
+}
+
 static void jsm_tty_break(struct uart_port *port, int break_state)
 {
 	unsigned long lock_flags;
@@ -345,6 +350,7 @@ static struct uart_ops jsm_ops = {
 	.start_tx	= jsm_tty_start_tx,
 	.send_xchar	= jsm_tty_send_xchar,
 	.stop_rx	= jsm_tty_stop_rx,
+	.enable_ms	= jsm_tty_enable_ms,
 	.break_ctl	= jsm_tty_break,
 	.startup	= jsm_tty_open,
 	.shutdown	= jsm_tty_close,
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index b2001c5b145..56841fe5f48 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -212,10 +212,18 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
 {
 	unsigned long flags;
 	unsigned int baud, baudclk;
+#if defined(CONFIG_M5272)
+	unsigned int baudfr;
+#endif
 	unsigned char mr1, mr2;
 
 	baud = uart_get_baud_rate(port, termios, old, 0, 230400);
+#if defined(CONFIG_M5272)
+	baudclk = (MCF_BUSCLK / baud) / 32;
+	baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16;
+#else
 	baudclk = ((MCF_BUSCLK / baud) + 16) / 32;
+#endif
 
 	mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR;
 	mr2 = 0;
@@ -262,6 +270,9 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
 	writeb(mr2, port->membase + MCFUART_UMR);
 	writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1);
 	writeb((baudclk & 0xff), port->membase + MCFUART_UBG2);
+#if defined(CONFIG_M5272)
+	writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD);
+#endif
 	writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER,
 		port->membase + MCFUART_UCSR);
 	writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE,
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 38c600c0dbb..3599828b976 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -32,7 +32,9 @@
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721)
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
-#define SCIF_ORER    0x0200   /* overrun error bit */
+# define PORT_PTCR	   0xA405011EUL
+# define PORT_PVCR	   0xA4050122UL
+# define SCIF_ORER	   0x0200   /* overrun error bit */
 #elif defined(CONFIG_SH_RTS7751R2D)
 # define SCSPTR1 0xFFE0001C /* 8 bit SCIF */
 # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
@@ -393,6 +395,7 @@ SCIx_FNS(SCSCR,  0x08, 16, 0x08, 16)
 SCIx_FNS(SCxTDR, 0x20,  8, 0x0c,  8)
 SCIx_FNS(SCxSR,  0x14, 16, 0x10, 16)
 SCIx_FNS(SCxRDR, 0x24,  8, 0x14,  8)
+SCIx_FNS(SCSPTR, 0,     0,    0,  0)
 SCIF_FNS(SCTDSR, 0x0c,  8)
 SCIF_FNS(SCFER,  0x10, 16)
 SCIF_FNS(SCFCR,  0x18, 16)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 4a6fe01831a..83a185d5296 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -230,17 +230,6 @@ config SPI_XILINX
 #
 comment "SPI Protocol Masters"
 
-config SPI_AT25
-	tristate "SPI EEPROMs from most vendors"
-	depends on SYSFS
-	help
-	  Enable this driver to get read/write support to most SPI EEPROMs,
-	  after you configure the board init code to know about each eeprom
-	  on your target board.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called at25.
-
 config SPI_SPIDEV
 	tristate "User mode SPI device driver support"
 	depends on EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 5e9f521b884..5d0451936d8 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.o
 # 	... add above this line ...
 
 # SPI protocol drivers (device/link on bus)
-obj-$(CONFIG_SPI_AT25)		+= at25.o
 obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
 obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
 # 	... add above this line ...
diff --git a/drivers/staging/agnx/agnx.h b/drivers/staging/agnx/agnx.h
index a75b0db3726..20f36da6247 100644
--- a/drivers/staging/agnx/agnx.h
+++ b/drivers/staging/agnx/agnx.h
@@ -1,6 +1,8 @@
 #ifndef AGNX_H_
 #define AGNX_H_
 
+#include <linux/io.h>
+
 #include "xmit.h"
 
 #define PFX				KBUILD_MODNAME ": "
diff --git a/drivers/staging/altpciechdma/altpciechdma.c b/drivers/staging/altpciechdma/altpciechdma.c
index 8e2b4ca0651..f516140ca97 100644
--- a/drivers/staging/altpciechdma/altpciechdma.c
+++ b/drivers/staging/altpciechdma/altpciechdma.c
@@ -531,7 +531,7 @@ static int __devinit dma_test(struct ape_dev *ape, struct pci_dev *dev)
         goto fail;
 
 	/* allocate and map coherently-cached memory for a DMA-able buffer */
-	/* @see 2.6.26.2/Documentation/DMA-mapping.txt line 318 */
+	/* @see Documentation/PCI/PCI-DMA-mapping.txt, near line 318 */
 	buffer_virt = (u8 *)pci_alloc_consistent(dev, PAGE_SIZE * 4, &buffer_bus);
 	if (!buffer_virt) {
 		printk(KERN_DEBUG "Could not allocate coherent DMA buffer.\n");
@@ -846,7 +846,7 @@ static int __devinit probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 #if 1 // @todo For now, disable 64-bit, because I do not understand the implications (DAC!)
 	/* query for DMA transfer */
-	/* @see Documentation/DMA-mapping.txt */
+	/* @see Documentation/PCI/PCI-DMA-mapping.txt */
 	if (!pci_set_dma_mask(dev, DMA_64BIT_MASK)) {
 		pci_set_consistent_dma_mask(dev, DMA_64BIT_MASK);
 		/* use 64-bit DMA */
diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index 6a4ceacb33f..758131cad08 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -319,6 +319,7 @@ int task_get_unused_fd_flags(struct task_struct *tsk, int flags)
 	int fd, error;
 	struct fdtable *fdt;
 	unsigned long rlim_cur;
+	unsigned long irqs;
 
 	if (files == NULL)
 		return -ESRCH;
@@ -335,12 +336,11 @@ repeat:
 	 * N.B. For clone tasks sharing a files structure, this test
 	 * will limit the total number of files that can be opened.
 	 */
-	rcu_read_lock();
-	if (tsk->signal)
+	rlim_cur = 0;
+	if (lock_task_sighand(tsk, &irqs)) {
 		rlim_cur = tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur;
-	else
-		rlim_cur = 0;
-	rcu_read_unlock();
+		unlock_task_sighand(tsk, &irqs);
+	}
 	if (fd >= rlim_cur)
 		goto out;
 
@@ -2649,14 +2649,14 @@ static void binder_vma_open(struct vm_area_struct *vma)
 {
 	struct binder_proc *proc = vma->vm_private_data;
 	if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
-		printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot);
+		printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot));
 	dump_stack();
 }
 static void binder_vma_close(struct vm_area_struct *vma)
 {
 	struct binder_proc *proc = vma->vm_private_data;
 	if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
-		printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot);
+		printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot));
 	proc->vma = NULL;
 }
 
@@ -2677,7 +2677,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma)
 		vma->vm_end = vma->vm_start + SZ_4M;
 
 	if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
-		printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot);
+		printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot));
 
 	if (vma->vm_flags & FORBIDDEN_MMAP_FLAGS) {
 		ret = -EPERM;
diff --git a/drivers/staging/android/lowmemorykiller.txt b/drivers/staging/android/lowmemorykiller.txt
new file mode 100644
index 00000000000..bd5c0c02896
--- /dev/null
+++ b/drivers/staging/android/lowmemorykiller.txt
@@ -0,0 +1,16 @@
+The lowmemorykiller driver lets user-space specify a set of memory thresholds
+where processes with a range of oom_adj values will get killed. Specify the
+minimum oom_adj values in /sys/module/lowmemorykiller/parameters/adj and the
+number of free pages in /sys/module/lowmemorykiller/parameters/minfree. Both
+files take a comma separated list of numbers in ascending order.
+
+For example, write "0,8" to /sys/module/lowmemorykiller/parameters/adj and
+"1024,4096" to /sys/module/lowmemorykiller/parameters/minfree to kill processes
+with a oom_adj value of 8 or higher when the free memory drops below 4096 pages
+and kill processes with a oom_adj value of 0 or higher when the free memory
+drops below 1024 pages.
+
+The driver considers memory used for caches to be free, but if a large
+percentage of the cached memory is locked this can be very inaccurate
+and processes may not get killed until the normal oom killer is triggered.
+
diff --git a/drivers/staging/android/timed_gpio.c b/drivers/staging/android/timed_gpio.c
index bea68c9fc94..903270cbbe0 100644
--- a/drivers/staging/android/timed_gpio.c
+++ b/drivers/staging/android/timed_gpio.c
@@ -18,7 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/hrtimer.h>
 #include <linux/err.h>
-#include <asm/arch/gpio.h>
+#include <linux/gpio.h>
 
 #include "timed_gpio.h"
 
@@ -49,7 +49,8 @@ static ssize_t gpio_enable_show(struct device *dev, struct device_attribute *att
 
 	if (hrtimer_active(&gpio_data->timer)) {
 		ktime_t r = hrtimer_get_remaining(&gpio_data->timer);
-		remaining = r.tv.sec * 1000 + r.tv.nsec / 1000000;
+		struct timeval t = ktime_to_timeval(r);
+		remaining = t.tv_sec * 1000 + t.tv_usec;
 	} else
 		remaining = 0;
 
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index b501bfb9c75..b47ca1e7e38 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -1,6 +1,7 @@
 config COMEDI
 	tristate "Data Acquision support (comedi)"
 	default N
+	depends on m
 	---help---
 	  Enable support a wide range of data acquision devices
 	  for Linux.
diff --git a/drivers/staging/meilhaus/Kconfig b/drivers/staging/meilhaus/Kconfig
index 6def83fa2c9..923af22a468 100644
--- a/drivers/staging/meilhaus/Kconfig
+++ b/drivers/staging/meilhaus/Kconfig
@@ -4,6 +4,7 @@
 
 menuconfig MEILHAUS
 	tristate "Meilhaus support"
+	depends on m
 	---help---
 	  If you have a Meilhaus card, say Y (or M) here.
 
@@ -18,7 +19,7 @@ if MEILHAUS
 config ME0600
 	tristate "Meilhaus ME-600 support"
 	default n
-	depends on PCI
+	depends on PCI && m
 	help
 	  This driver supports the Meilhaus ME-600 family of boards
 	  that do data collection and multipurpose I/O.
@@ -29,7 +30,7 @@ config ME0600
 config ME0900
 	tristate "Meilhaus ME-900 support"
 	default n
-	depends on PCI
+	depends on PCI && m
 	help
 	  This driver supports the Meilhaus ME-900 family of boards
 	  that do data collection and multipurpose I/O.
@@ -40,7 +41,7 @@ config ME0900
 config ME1000
 	tristate "Meilhaus ME-1000 support"
 	default n
-	depends on PCI
+	depends on PCI && m
 	help
 	  This driver supports the Meilhaus ME-1000 family of boards
 	  that do data collection and multipurpose I/O.
@@ -51,7 +52,7 @@ config ME1000
 config ME1400
 	tristate "Meilhaus ME-1400 support"
 	default n
-	depends on PCI
+	depends on PCI && m
 	help
 	  This driver supports the Meilhaus ME-1400 family of boards
 	  that do data collection and multipurpose I/O.
@@ -62,7 +63,7 @@ config ME1400
 config ME1600
 	tristate "Meilhaus ME-1600 support"
 	default n
-	depends on PCI
+	depends on PCI && m
 	help
 	  This driver supports the Meilhaus ME-1600 family of boards
 	  that do data collection and multipurpose I/O.
@@ -73,7 +74,7 @@ config ME1600
 config ME4600
 	tristate "Meilhaus ME-4600 support"
 	default n
-	depends on PCI
+	depends on PCI && m
 	help
 	  This driver supports the Meilhaus ME-4600 family of boards
 	  that do data collection and multipurpose I/O.
@@ -84,7 +85,7 @@ config ME4600
 config ME6000
 	tristate "Meilhaus ME-6000 support"
 	default n
-	depends on PCI
+	depends on PCI && m
 	help
 	  This driver supports the Meilhaus ME-6000 family of boards
 	  that do data collection and multipurpose I/O.
@@ -95,7 +96,7 @@ config ME6000
 config ME8100
 	tristate "Meilhaus ME-8100 support"
 	default n
-	depends on PCI
+	depends on PCI && m
 	help
 	  This driver supports the Meilhaus ME-8100 family of boards
 	  that do data collection and multipurpose I/O.
@@ -106,7 +107,7 @@ config ME8100
 config ME8200
 	tristate "Meilhaus ME-8200 support"
 	default n
-	depends on PCI
+	depends on PCI && m
 	help
 	  This driver supports the Meilhaus ME-8200 family of boards
 	  that do data collection and multipurpose I/O.
@@ -117,7 +118,7 @@ config ME8200
 config MEDUMMY
 	tristate "Meilhaus dummy driver"
 	default n
-	depends on PCI
+	depends on PCI && m
 	help
 	  This provides a dummy driver for the Meilhaus driver package
 
diff --git a/drivers/staging/poch/poch.c b/drivers/staging/poch/poch.c
index ec343ef53a8..0d111ddfabb 100644
--- a/drivers/staging/poch/poch.c
+++ b/drivers/staging/poch/poch.c
@@ -1026,7 +1026,7 @@ static int poch_ioctl(struct inode *inode, struct file *filp,
 		}
 		break;
 	case POCH_IOC_GET_COUNTERS:
-		if (access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters)))
+		if (!access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters)))
 			return -EFAULT;
 
 		spin_lock_irq(&channel->counters_lock);
diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c
index 72e209276ea..22f93dd0ba0 100644
--- a/drivers/staging/usbip/usbip_common.c
+++ b/drivers/staging/usbip/usbip_common.c
@@ -406,8 +406,20 @@ void usbip_start_threads(struct usbip_device *ud)
 	/*
 	 * threads are invoked per one device (per one connection).
 	 */
-	kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0);
-	kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0);
+	int retval;
+
+	retval = kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0);
+	if (retval < 0) {
+		printk(KERN_ERR "Creating tcp_rx thread for ud %p failed.\n",
+				ud);
+		return;
+	}
+	retval = kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0);
+	if (retval < 0) {
+		printk(KERN_ERR "Creating tcp_tx thread for ud %p failed.\n",
+				ud);
+		return;
+	}
 
 	/* confirm threads are starting */
 	wait_for_completion(&ud->tcp_rx.thread_done);
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 8b7c419b876..8bcde8cde55 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_USB_EHCI_HCD)	+= host/
 obj-$(CONFIG_USB_ISP116X_HCD)	+= host/
 obj-$(CONFIG_USB_OHCI_HCD)	+= host/
 obj-$(CONFIG_USB_UHCI_HCD)	+= host/
+obj-$(CONFIG_USB_FHCI_HCD)	+= host/
 obj-$(CONFIG_USB_SL811_HCD)	+= host/
 obj-$(CONFIG_USB_U132_HCD)	+= host/
 obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 00b47ea24f8..97ba4a985ed 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1349,6 +1349,12 @@ static struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x0e8d, 0x3329), /* i-blue 747, Qstarz BT-Q1000, Holux M-241 */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
+	{ USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
 	{ USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
@@ -1370,6 +1376,9 @@ static struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
 
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index b5775af3ba2..3f3ee135193 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -226,6 +226,7 @@ static const struct quirk_printer_struct quirk_printers[] = {
 	{ 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */
 	{ 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */
 	{ 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */
+	{ 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */
 	{ 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */
 	{ 0, 0 }
 };
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 26fece124e0..7513bb083c1 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1700,7 +1700,7 @@ const struct file_operations usbdev_file_operations = {
 	.release =	usbdev_release,
 };
 
-void usb_fs_classdev_common_remove(struct usb_device *udev)
+static void usbdev_remove(struct usb_device *udev)
 {
 	struct dev_state *ps;
 	struct siginfo sinfo;
@@ -1742,10 +1742,15 @@ static void usb_classdev_remove(struct usb_device *dev)
 {
 	if (dev->usb_classdev)
 		device_unregister(dev->usb_classdev);
-	usb_fs_classdev_common_remove(dev);
 }
 
-static int usb_classdev_notify(struct notifier_block *self,
+#else
+#define usb_classdev_add(dev)		0
+#define usb_classdev_remove(dev)	do {} while (0)
+
+#endif
+
+static int usbdev_notify(struct notifier_block *self,
 			       unsigned long action, void *dev)
 {
 	switch (action) {
@@ -1755,15 +1760,15 @@ static int usb_classdev_notify(struct notifier_block *self,
 		break;
 	case USB_DEVICE_REMOVE:
 		usb_classdev_remove(dev);
+		usbdev_remove(dev);
 		break;
 	}
 	return NOTIFY_OK;
 }
 
 static struct notifier_block usbdev_nb = {
-	.notifier_call = 	usb_classdev_notify,
+	.notifier_call = 	usbdev_notify,
 };
-#endif
 
 static struct cdev usb_device_cdev;
 
@@ -1798,9 +1803,8 @@ int __init usb_devio_init(void)
 	 * to /sys/dev
 	 */
 	usb_classdev_class->dev_kobj = NULL;
-
-	usb_register_notify(&usbdev_nb);
 #endif
+	usb_register_notify(&usbdev_nb);
 out:
 	return retval;
 
@@ -1811,8 +1815,8 @@ error_cdev:
 
 void usb_devio_cleanup(void)
 {
-#ifdef CONFIG_USB_DEVICE_CLASS
 	usb_unregister_notify(&usbdev_nb);
+#ifdef CONFIG_USB_DEVICE_CLASS
 	class_destroy(usb_classdev_class);
 #endif
 	cdev_del(&usb_device_cdev);
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 98760553bc9..d0a21a5f820 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -284,7 +284,7 @@ static int usb_unbind_interface(struct device *dev)
 	 * supports "soft" unbinding.
 	 */
 	if (!driver->soft_unbind)
-		usb_disable_interface(udev, intf);
+		usb_disable_interface(udev, intf, false);
 
 	driver->disconnect(intf);
 	usb_cancel_queued_reset(intf);
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 507741ed448..c54fc40458b 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -128,7 +128,6 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	}
 
 	pci_set_master(dev);
-	device_set_wakeup_enable(&dev->dev, 1);
 
 	retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
 	if (retval != 0)
@@ -201,6 +200,7 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
 	struct usb_hcd		*hcd = pci_get_drvdata(dev);
 	int			retval = 0;
 	int			wake, w;
+	int			has_pci_pm;
 
 	/* Root hub suspend should have stopped all downstream traffic,
 	 * and all bus master traffic.  And done so for both the interface
@@ -230,6 +230,15 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
 
 	synchronize_irq(dev->irq);
 
+	/* Downstream ports from this root hub should already be quiesced, so
+	 * there will be no DMA activity.  Now we can shut down the upstream
+	 * link (except maybe for PME# resume signaling) and enter some PCI
+	 * low power state, if the hardware allows.
+	 */
+	pci_disable_device(dev);
+
+	pci_save_state(dev);
+
 	/* Don't fail on error to enable wakeup.  We rely on pci code
 	 * to reject requests the hardware can't implement, rather
 	 * than coding the same thing.
@@ -241,35 +250,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
 		wake = w;
 	dev_dbg(&dev->dev, "wakeup: %d\n", wake);
 
-	/* Downstream ports from this root hub should already be quiesced, so
-	 * there will be no DMA activity.  Now we can shut down the upstream
-	 * link (except maybe for PME# resume signaling) and enter some PCI
-	 * low power state, if the hardware allows.
-	 */
-	pci_disable_device(dev);
- done:
-	return retval;
-}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
-
-/**
- * usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled
- * @dev: USB Host Controller being suspended
- * @message: Power Management message describing this state transition
- *
- * Store this function in the HCD's struct pci_driver as .suspend_late.
- */
-int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message)
-{
-	int			retval = 0;
-	int			has_pci_pm;
-
-	/* We might already be suspended (runtime PM -- not yet written) */
-	if (dev->current_state != PCI_D0)
-		goto done;
-
-	pci_save_state(dev);
-
 	/* Don't change state if we don't need to */
 	if (message.event == PM_EVENT_FREEZE ||
 			message.event == PM_EVENT_PRETHAW) {
@@ -315,7 +295,7 @@ int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message)
  done:
 	return retval;
 }
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late);
+EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
 
 /**
  * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled
@@ -325,65 +305,8 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late);
  */
 int usb_hcd_pci_resume_early(struct pci_dev *dev)
 {
-	int		retval = 0;
-	pci_power_t	state = dev->current_state;
-
-#ifdef CONFIG_PPC_PMAC
-	/* Reenable ASIC clocks for USB */
-	if (machine_is(powermac)) {
-		struct device_node *of_node;
-
-		of_node = pci_device_to_OF_node(dev);
-		if (of_node)
-			pmac_call_feature(PMAC_FTR_USB_ENABLE,
-						of_node, 0, 1);
-	}
-#endif
-
-	/* NOTE:  chip docs cover clean "real suspend" cases (what Linux
-	 * calls "standby", "suspend to RAM", and so on).  There are also
-	 * dirty cases when swsusp fakes a suspend in "shutdown" mode.
-	 */
-	if (state != PCI_D0) {
-#ifdef	DEBUG
-		int	pci_pm;
-		u16	pmcr;
-
-		pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-		pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr);
-		pmcr &= PCI_PM_CTRL_STATE_MASK;
-		if (pmcr) {
-			/* Clean case:  power to USB and to HC registers was
-			 * maintained; remote wakeup is easy.
-			 */
-			dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr);
-		} else {
-			/* Clean:  HC lost Vcc power, D0 uninitialized
-			 *   + Vaux may have preserved port and transceiver
-			 *     state ... for remote wakeup from D3cold
-			 *   + or not; HCD must reinit + re-enumerate
-			 *
-			 * Dirty: D0 semi-initialized cases with swsusp
-			 *   + after BIOS init
-			 *   + after Linux init (HCD statically linked)
-			 */
-			dev_dbg(&dev->dev, "resume from previous PCI D%d\n",
-					state);
-		}
-#endif
-
-		retval = pci_set_power_state(dev, PCI_D0);
-	} else {
-		/* Same basic cases: clean (powered/not), dirty */
-		dev_dbg(&dev->dev, "PCI legacy resume\n");
-	}
-
-	if (retval < 0)
-		dev_err(&dev->dev, "can't resume: %d\n", retval);
-	else
-		pci_restore_state(dev);
-
-	return retval;
+	pci_restore_state(dev);
+	return 0;
 }
 EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early);
 
@@ -398,6 +321,18 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
 	struct usb_hcd		*hcd;
 	int			retval;
 
+#ifdef CONFIG_PPC_PMAC
+	/* Reenable ASIC clocks for USB */
+	if (machine_is(powermac)) {
+		struct device_node *of_node;
+
+		of_node = pci_device_to_OF_node(dev);
+		if (of_node)
+			pmac_call_feature(PMAC_FTR_USB_ENABLE,
+						of_node, 0, 1);
+	}
+#endif
+
 	hcd = pci_get_drvdata(dev);
 	if (hcd->state != HC_STATE_SUSPENDED) {
 		dev_dbg(hcd->self.controller,
@@ -405,6 +340,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
 		return 0;
 	}
 
+	pci_enable_wake(dev, PCI_D0, false);
+
 	retval = pci_enable_device(dev);
 	if (retval < 0) {
 		dev_err(&dev->dev, "can't re-enable after resume, %d!\n",
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 572d2cf46e8..5b94a56bec2 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev);
 
 #ifdef CONFIG_PM
 extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
-extern int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t msg);
 extern int usb_hcd_pci_resume_early(struct pci_dev *dev);
 extern int usb_hcd_pci_resume(struct pci_dev *dev);
 #endif /* CONFIG_PM */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 94d5ee263c2..cd50d86029e 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2382,8 +2382,8 @@ static int hub_port_debounce(struct usb_hub *hub, int port1)
 
 void usb_ep0_reinit(struct usb_device *udev)
 {
-	usb_disable_endpoint(udev, 0 + USB_DIR_IN);
-	usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
+	usb_disable_endpoint(udev, 0 + USB_DIR_IN, true);
+	usb_disable_endpoint(udev, 0 + USB_DIR_OUT, true);
 	usb_enable_endpoint(udev, &udev->ep0, true);
 }
 EXPORT_SYMBOL_GPL(usb_ep0_reinit);
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 2a129cb7bb5..dff5760a37f 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -717,7 +717,6 @@ static void usbfs_remove_device(struct usb_device *dev)
 		fs_remove_file (dev->usbfs_dentry);
 		dev->usbfs_dentry = NULL;
 	}
-	usb_fs_classdev_common_remove(dev);
 }
 
 static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev)
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index de51667dd64..31fb204f44c 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1039,14 +1039,15 @@ static void remove_intf_ep_devs(struct usb_interface *intf)
  * @dev: the device whose endpoint is being disabled
  * @epaddr: the endpoint's address.  Endpoint number for output,
  *	endpoint number + USB_DIR_IN for input
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ *	controller hardware
  *
- * Deallocates hcd/hardware state for this endpoint ... and nukes all
- * pending urbs.
- *
- * If the HCD hasn't registered a disable() function, this sets the
- * endpoint's maxpacket size to 0 to prevent further submissions.
+ * Disables the endpoint for URB submission and nukes all pending URBs.
+ * If @reset_hardware is set then also deallocates hcd/hardware state
+ * for the endpoint.
  */
-void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr)
+void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
+		bool reset_hardware)
 {
 	unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
 	struct usb_host_endpoint *ep;
@@ -1056,15 +1057,18 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr)
 
 	if (usb_endpoint_out(epaddr)) {
 		ep = dev->ep_out[epnum];
-		dev->ep_out[epnum] = NULL;
+		if (reset_hardware)
+			dev->ep_out[epnum] = NULL;
 	} else {
 		ep = dev->ep_in[epnum];
-		dev->ep_in[epnum] = NULL;
+		if (reset_hardware)
+			dev->ep_in[epnum] = NULL;
 	}
 	if (ep) {
 		ep->enabled = 0;
 		usb_hcd_flush_endpoint(dev, ep);
-		usb_hcd_disable_endpoint(dev, ep);
+		if (reset_hardware)
+			usb_hcd_disable_endpoint(dev, ep);
 	}
 }
 
@@ -1072,17 +1076,21 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr)
  * usb_disable_interface -- Disable all endpoints for an interface
  * @dev: the device whose interface is being disabled
  * @intf: pointer to the interface descriptor
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ *	controller hardware
  *
  * Disables all the endpoints for the interface's current altsetting.
  */
-void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf)
+void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
+		bool reset_hardware)
 {
 	struct usb_host_interface *alt = intf->cur_altsetting;
 	int i;
 
 	for (i = 0; i < alt->desc.bNumEndpoints; ++i) {
 		usb_disable_endpoint(dev,
-				alt->endpoint[i].desc.bEndpointAddress);
+				alt->endpoint[i].desc.bEndpointAddress,
+				reset_hardware);
 	}
 }
 
@@ -1103,8 +1111,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
 	dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
 		skip_ep0 ? "non-ep0" : "all");
 	for (i = skip_ep0; i < 16; ++i) {
-		usb_disable_endpoint(dev, i);
-		usb_disable_endpoint(dev, i + USB_DIR_IN);
+		usb_disable_endpoint(dev, i, true);
+		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
 	}
 	dev->toggle[0] = dev->toggle[1] = 0;
 
@@ -1274,7 +1282,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 		remove_intf_ep_devs(iface);
 		usb_remove_sysfs_intf_files(iface);
 	}
-	usb_disable_interface(dev, iface);
+	usb_disable_interface(dev, iface, true);
 
 	iface->cur_altsetting = alt;
 
@@ -1353,8 +1361,8 @@ int usb_reset_configuration(struct usb_device *dev)
 	 */
 
 	for (i = 1; i < 16; ++i) {
-		usb_disable_endpoint(dev, i);
-		usb_disable_endpoint(dev, i + USB_DIR_IN);
+		usb_disable_endpoint(dev, i, true);
+		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
 	}
 
 	config = dev->actconfig;
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 386177867a8..79d8a9ea559 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -15,9 +15,10 @@ extern void usb_enable_endpoint(struct usb_device *dev,
 		struct usb_host_endpoint *ep, bool reset_toggle);
 extern void usb_enable_interface(struct usb_device *dev,
 		struct usb_interface *intf, bool reset_toggles);
-extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr);
+extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
+		bool reset_hardware);
 extern void usb_disable_interface(struct usb_device *dev,
-		struct usb_interface *intf);
+		struct usb_interface *intf, bool reset_hardware);
 extern void usb_release_interface_cache(struct kref *ref);
 extern void usb_disable_device(struct usb_device *dev, int skip_ep0);
 extern int usb_deauthorize_device(struct usb_device *);
@@ -151,7 +152,6 @@ extern struct usb_driver usbfs_driver;
 extern const struct file_operations usbfs_devices_fops;
 extern const struct file_operations usbdev_file_operations;
 extern void usbfs_conn_disc_event(void);
-extern void usb_fs_classdev_common_remove(struct usb_device *udev);
 
 extern int usb_devio_init(void);
 extern void usb_devio_cleanup(void);
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index f2da0269e1b..5d11c291f1a 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -683,6 +683,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	struct usb_request		*req = cdev->req;
 	int				value = -EOPNOTSUPP;
 	u16				w_index = le16_to_cpu(ctrl->wIndex);
+	u8				intf = w_index & 0xFF;
 	u16				w_value = le16_to_cpu(ctrl->wValue);
 	u16				w_length = le16_to_cpu(ctrl->wLength);
 	struct usb_function		*f = NULL;
@@ -769,10 +770,10 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			goto unknown;
 		if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
 			break;
-		f = cdev->config->interface[w_index];
+		f = cdev->config->interface[intf];
 		if (!f)
 			break;
-		if (w_value && !f->get_alt)
+		if (w_value && !f->set_alt)
 			break;
 		value = f->set_alt(f, w_index, w_value);
 		break;
@@ -781,7 +782,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			goto unknown;
 		if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
 			break;
-		f = cdev->config->interface[w_index];
+		f = cdev->config->interface[intf];
 		if (!f)
 			break;
 		/* lots of interfaces only need altsetting zero... */
@@ -808,7 +809,7 @@ unknown:
 		 */
 		if ((ctrl->bRequestType & USB_RECIP_MASK)
 				== USB_RECIP_INTERFACE) {
-			f = cdev->config->interface[w_index];
+			f = cdev->config->interface[intf];
 			if (f && f->setup)
 				value = f->setup(f, ctrl);
 			else
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index cde8fdf15d5..77c5d0a8a06 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -297,7 +297,7 @@ void imx_ep_stall(struct imx_ep_struct *imx_ep)
 
 		for (i = 0; i < 100; i ++) {
 			temp = __raw_readl(imx_usb->base + USB_EP_STAT(EP_NO(imx_ep)));
-	 		if (!temp & EPSTAT_STALL)
+			if (!(temp & EPSTAT_STALL))
 	 			break;
 	 		udelay(20);
 	 	}
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2b476b6b3d4..2c63bfb1f8d 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -140,6 +140,7 @@ config USB_OHCI_HCD
 	tristate "OHCI HCD support"
 	depends on USB && USB_ARCH_HAS_OHCI
 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
+	select USB_OTG_UTILS if ARCH_OMAP
 	---help---
 	  The Open Host Controller Interface (OHCI) is a standard for accessing
 	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
@@ -238,6 +239,23 @@ config USB_UHCI_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called uhci-hcd.
 
+config USB_FHCI_HCD
+	tristate "Freescale QE USB Host Controller support"
+	depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE
+	select FSL_GTM
+	select QE_USB
+	help
+	  This driver enables support for Freescale QE USB Host Controller
+	  (as found on MPC8360 and MPC8323 processors), the driver supports
+	  Full and Low Speed USB.
+
+config FHCI_DEBUG
+	bool "Freescale QE USB Host Controller debug support"
+	depends on USB_FHCI_HCD && DEBUG_FS
+	help
+	  Say "y" to see some FHCI debug information and statistics
+	  throught debugfs.
+
 config USB_U132_HCD
 	tristate "Elan U132 Adapter Host Controller"
 	depends on USB && USB_FTDI_ELAN
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index e5f3f20787e..f163571e33d 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -7,6 +7,11 @@ ifeq ($(CONFIG_USB_DEBUG),y)
 endif
 
 isp1760-objs := isp1760-hcd.o isp1760-if.o
+fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \
+	     fhci-tds.o fhci-sched.o
+ifeq ($(CONFIG_FHCI_DEBUG),y)
+fhci-objs += fhci-dbg.o
+endif
 
 obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
 
@@ -17,6 +22,7 @@ obj-$(CONFIG_USB_OXU210HP_HCD)	+= oxu210hp-hcd.o
 obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
 obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
 obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
+obj-$(CONFIG_USB_FHCI_HCD)	+= fhci.o
 obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
 obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
 obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index bdc6e86e1f8..bb21fb0a496 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -230,7 +230,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		pci_read_config_word(pdev, 0x62, &port_wake);
 		if (port_wake & 0x0001) {
 			dev_warn(&pdev->dev, "Enabling legacy PCI PM\n");
-			device_init_wakeup(&pdev->dev, 1);
+			device_set_wakeup_capable(&pdev->dev, 1);
 		}
 	}
 
@@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver = {
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.suspend_late =	usb_hcd_pci_suspend_late,
 	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif
diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c
new file mode 100644
index 00000000000..34e14edf390
--- /dev/null
+++ b/drivers/usb/host/fhci-dbg.c
@@ -0,0 +1,139 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er)
+{
+	int i;
+
+	if (usb_er == -1) {
+		fhci->usb_irq_stat[12]++;
+		return;
+	}
+
+	for (i = 0; i < 12; ++i) {
+		if (usb_er & (1 << i))
+			fhci->usb_irq_stat[i]++;
+	}
+}
+
+static int fhci_dfs_regs_show(struct seq_file *s, void *v)
+{
+	struct fhci_hcd *fhci = s->private;
+	struct fhci_regs __iomem *regs = fhci->regs;
+
+	seq_printf(s,
+		"mode: 0x%x\n" "addr: 0x%x\n"
+		"command: 0x%x\n" "ep0: 0x%x\n"
+		"event: 0x%x\n" "mask: 0x%x\n"
+		"status: 0x%x\n" "SOF timer: %d\n"
+		"frame number: %d\n"
+		"lines status: 0x%x\n",
+		in_8(&regs->usb_mod), in_8(&regs->usb_addr),
+		in_8(&regs->usb_comm), in_be16(&regs->usb_ep[0]),
+		in_be16(&regs->usb_event), in_be16(&regs->usb_mask),
+		in_8(&regs->usb_status), in_be16(&regs->usb_sof_tmr),
+		in_be16(&regs->usb_frame_num),
+		fhci_ioports_check_bus_state(fhci));
+
+	return 0;
+}
+
+static int fhci_dfs_irq_stat_show(struct seq_file *s, void *v)
+{
+	struct fhci_hcd *fhci = s->private;
+	int *usb_irq_stat = fhci->usb_irq_stat;
+
+	seq_printf(s,
+		"RXB: %d\n" "TXB: %d\n" "BSY: %d\n"
+		"SOF: %d\n" "TXE0: %d\n" "TXE1: %d\n"
+		"TXE2: %d\n" "TXE3: %d\n" "IDLE: %d\n"
+		"RESET: %d\n" "SFT: %d\n" "MSF: %d\n"
+		"IDLE_ONLY: %d\n",
+		usb_irq_stat[0], usb_irq_stat[1], usb_irq_stat[2],
+		usb_irq_stat[3], usb_irq_stat[4], usb_irq_stat[5],
+		usb_irq_stat[6], usb_irq_stat[7], usb_irq_stat[8],
+		usb_irq_stat[9], usb_irq_stat[10], usb_irq_stat[11],
+		usb_irq_stat[12]);
+
+	return 0;
+}
+
+static int fhci_dfs_regs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, fhci_dfs_regs_show, inode->i_private);
+}
+
+static int fhci_dfs_irq_stat_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, fhci_dfs_irq_stat_show, inode->i_private);
+}
+
+static const struct file_operations fhci_dfs_regs_fops = {
+	.open = fhci_dfs_regs_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static const struct file_operations fhci_dfs_irq_stat_fops = {
+	.open = fhci_dfs_irq_stat_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+void fhci_dfs_create(struct fhci_hcd *fhci)
+{
+	struct device *dev = fhci_to_hcd(fhci)->self.controller;
+
+	fhci->dfs_root = debugfs_create_dir(dev->bus_id, NULL);
+	if (!fhci->dfs_root) {
+		WARN_ON(1);
+		return;
+	}
+
+	fhci->dfs_regs = debugfs_create_file("regs", S_IFREG | S_IRUGO,
+		fhci->dfs_root, fhci, &fhci_dfs_regs_fops);
+
+	fhci->dfs_irq_stat = debugfs_create_file("irq_stat",
+		S_IFREG | S_IRUGO, fhci->dfs_root, fhci,
+		&fhci_dfs_irq_stat_fops);
+
+	WARN_ON(!fhci->dfs_regs || !fhci->dfs_irq_stat);
+}
+
+void fhci_dfs_destroy(struct fhci_hcd *fhci)
+{
+	if (!fhci->dfs_root)
+		return;
+
+	if (fhci->dfs_irq_stat)
+		debugfs_remove(fhci->dfs_irq_stat);
+
+	if (fhci->dfs_regs)
+		debugfs_remove(fhci->dfs_regs);
+
+	debugfs_remove(fhci->dfs_root);
+}
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
new file mode 100644
index 00000000000..ba622cc8a9b
--- /dev/null
+++ b/drivers/usb/host/fhci-hcd.c
@@ -0,0 +1,836 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <asm/qe.h>
+#include <asm/fsl_gtm.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+void fhci_start_sof_timer(struct fhci_hcd *fhci)
+{
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	/* clear frame_n */
+	out_be16(&fhci->pram->frame_num, 0);
+
+	out_be16(&fhci->regs->usb_sof_tmr, 0);
+	setbits8(&fhci->regs->usb_mod, USB_MODE_SFTE);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+void fhci_stop_sof_timer(struct fhci_hcd *fhci)
+{
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	clrbits8(&fhci->regs->usb_mod, USB_MODE_SFTE);
+	gtm_stop_timer16(fhci->timer);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+u16 fhci_get_sof_timer_count(struct fhci_usb *usb)
+{
+	return be16_to_cpu(in_be16(&usb->fhci->regs->usb_sof_tmr) / 12);
+}
+
+/* initialize the endpoint zero */
+static u32 endpoint_zero_init(struct fhci_usb *usb,
+			      enum fhci_mem_alloc data_mem,
+			      u32 ring_len)
+{
+	u32 rc;
+
+	rc = fhci_create_ep(usb, data_mem, ring_len);
+	if (rc)
+		return rc;
+
+	/* inilialize endpoint registers */
+	fhci_init_ep_registers(usb, usb->ep0, data_mem);
+
+	return 0;
+}
+
+/* enable the USB interrupts */
+void fhci_usb_enable_interrupt(struct fhci_usb *usb)
+{
+	struct fhci_hcd *fhci = usb->fhci;
+
+	if (usb->intr_nesting_cnt == 1) {
+		/* initialize the USB interrupt */
+		enable_irq(fhci_to_hcd(fhci)->irq);
+
+		/* initialize the event register and mask register */
+		out_be16(&usb->fhci->regs->usb_event, 0xffff);
+		out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+		/* enable the timer interrupts */
+		enable_irq(fhci->timer->irq);
+	} else if (usb->intr_nesting_cnt > 1)
+		fhci_info(fhci, "unbalanced USB interrupts nesting\n");
+	usb->intr_nesting_cnt--;
+}
+
+/* diable the usb interrupt */
+void fhci_usb_disable_interrupt(struct fhci_usb *usb)
+{
+	struct fhci_hcd *fhci = usb->fhci;
+
+	if (usb->intr_nesting_cnt == 0) {
+		/* diable the timer interrupt */
+		disable_irq_nosync(fhci->timer->irq);
+
+		/* disable the usb interrupt */
+		disable_irq_nosync(fhci_to_hcd(fhci)->irq);
+		out_be16(&usb->fhci->regs->usb_mask, 0);
+	}
+	usb->intr_nesting_cnt++;
+}
+
+/* enable the USB controller */
+static u32 fhci_usb_enable(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	out_be16(&usb->fhci->regs->usb_event, 0xffff);
+	out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+	setbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+	mdelay(100);
+
+	return 0;
+}
+
+/* disable the USB controller */
+static u32 fhci_usb_disable(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	fhci_usb_disable_interrupt(usb);
+	fhci_port_disable(fhci);
+
+	/* disable the usb controller */
+	if (usb->port_status == FHCI_PORT_FULL ||
+			usb->port_status == FHCI_PORT_LOW)
+		fhci_device_disconnected_interrupt(fhci);
+
+	clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+	return 0;
+}
+
+/* check the bus state by polling the QE bit on the IO ports */
+int fhci_ioports_check_bus_state(struct fhci_hcd *fhci)
+{
+	u8 bits = 0;
+
+	/* check USBOE,if transmitting,exit */
+	if (!gpio_get_value(fhci->gpios[GPIO_USBOE]))
+		return -1;
+
+	/* check USBRP */
+	if (gpio_get_value(fhci->gpios[GPIO_USBRP]))
+		bits |= 0x2;
+
+	/* check USBRN */
+	if (gpio_get_value(fhci->gpios[GPIO_USBRN]))
+		bits |= 0x1;
+
+	return bits;
+}
+
+static void fhci_mem_free(struct fhci_hcd *fhci)
+{
+	struct ed *ed;
+	struct ed *next_ed;
+	struct td *td;
+	struct td *next_td;
+
+	list_for_each_entry_safe(ed, next_ed, &fhci->empty_eds, node) {
+		list_del(&ed->node);
+		kfree(ed);
+	}
+
+	list_for_each_entry_safe(td, next_td, &fhci->empty_tds, node) {
+		list_del(&td->node);
+		kfree(td);
+	}
+
+	kfree(fhci->vroot_hub);
+	fhci->vroot_hub = NULL;
+
+	kfree(fhci->hc_list);
+	fhci->hc_list = NULL;
+}
+
+static int fhci_mem_init(struct fhci_hcd *fhci)
+{
+	int i;
+
+	fhci->hc_list = kzalloc(sizeof(*fhci->hc_list), GFP_KERNEL);
+	if (!fhci->hc_list)
+		goto err;
+
+	INIT_LIST_HEAD(&fhci->hc_list->ctrl_list);
+	INIT_LIST_HEAD(&fhci->hc_list->bulk_list);
+	INIT_LIST_HEAD(&fhci->hc_list->iso_list);
+	INIT_LIST_HEAD(&fhci->hc_list->intr_list);
+	INIT_LIST_HEAD(&fhci->hc_list->done_list);
+
+	fhci->vroot_hub = kzalloc(sizeof(*fhci->vroot_hub), GFP_KERNEL);
+	if (!fhci->vroot_hub)
+		goto err;
+
+	INIT_LIST_HEAD(&fhci->empty_eds);
+	INIT_LIST_HEAD(&fhci->empty_tds);
+
+	/* initialize work queue to handle done list */
+	fhci_tasklet.data = (unsigned long)fhci;
+	fhci->process_done_task = &fhci_tasklet;
+
+	for (i = 0; i < MAX_TDS; i++) {
+		struct td *td;
+
+		td = kmalloc(sizeof(*td), GFP_KERNEL);
+		if (!td)
+			goto err;
+		fhci_recycle_empty_td(fhci, td);
+	}
+	for (i = 0; i < MAX_EDS; i++) {
+		struct ed *ed;
+
+		ed = kmalloc(sizeof(*ed), GFP_KERNEL);
+		if (!ed)
+			goto err;
+		fhci_recycle_empty_ed(fhci, ed);
+	}
+
+	fhci->active_urbs = 0;
+	return 0;
+err:
+	fhci_mem_free(fhci);
+	return -ENOMEM;
+}
+
+/* destroy the fhci_usb structure */
+static void fhci_usb_free(void *lld)
+{
+	struct fhci_usb *usb = lld;
+	struct fhci_hcd *fhci = usb->fhci;
+
+	if (usb) {
+		fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+		fhci_ep0_free(usb);
+		kfree(usb->actual_frame);
+		kfree(usb);
+	}
+}
+
+/* initialize the USB */
+static int fhci_usb_init(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	memset_io(usb->fhci->pram, 0, FHCI_PRAM_SIZE);
+
+	usb->port_status = FHCI_PORT_DISABLED;
+	usb->max_frame_usage = FRAME_TIME_USAGE;
+	usb->sw_transaction_time = SW_FIX_TIME_BETWEEN_TRANSACTION;
+
+	usb->actual_frame = kzalloc(sizeof(*usb->actual_frame), GFP_KERNEL);
+	if (!usb->actual_frame) {
+		fhci_usb_free(usb);
+		return -ENOMEM;
+	}
+
+	INIT_LIST_HEAD(&usb->actual_frame->tds_list);
+
+	/* initializing registers on chip, clear frame number */
+	out_be16(&fhci->pram->frame_num, 0);
+
+	/* clear rx state */
+	out_be32(&fhci->pram->rx_state, 0);
+
+	/* set mask register */
+	usb->saved_msk = (USB_E_TXB_MASK |
+			  USB_E_TXE1_MASK |
+			  USB_E_IDLE_MASK |
+			  USB_E_RESET_MASK | USB_E_SFT_MASK | USB_E_MSF_MASK);
+
+	out_8(&usb->fhci->regs->usb_mod, USB_MODE_HOST | USB_MODE_EN);
+
+	/* clearing the mask register */
+	out_be16(&usb->fhci->regs->usb_mask, 0);
+
+	/* initialing the event register */
+	out_be16(&usb->fhci->regs->usb_event, 0xffff);
+
+	if (endpoint_zero_init(usb, DEFAULT_DATA_MEM, DEFAULT_RING_LEN) != 0) {
+		fhci_usb_free(usb);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* initialize the fhci_usb struct and the corresponding data staruct */
+static struct fhci_usb *fhci_create_lld(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb;
+
+	/* allocate memory for SCC data structure */
+	usb = kzalloc(sizeof(*usb), GFP_KERNEL);
+	if (!usb) {
+		fhci_err(fhci, "no memory for SCC data struct\n");
+		return NULL;
+	}
+
+	usb->fhci = fhci;
+	usb->hc_list = fhci->hc_list;
+	usb->vroot_hub = fhci->vroot_hub;
+
+	usb->transfer_confirm = fhci_transfer_confirm_callback;
+
+	return usb;
+}
+
+static int fhci_start(struct usb_hcd *hcd)
+{
+	int ret;
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+	ret = fhci_mem_init(fhci);
+	if (ret) {
+		fhci_err(fhci, "failed to allocate memory\n");
+		goto err;
+	}
+
+	fhci->usb_lld = fhci_create_lld(fhci);
+	if (!fhci->usb_lld) {
+		fhci_err(fhci, "low level driver config failed\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	ret = fhci_usb_init(fhci);
+	if (ret) {
+		fhci_err(fhci, "low level driver initialize failed\n");
+		goto err;
+	}
+
+	spin_lock_init(&fhci->lock);
+
+	/* connect the virtual root hub */
+	fhci->vroot_hub->dev_num = 1;	/* this field may be needed to fix */
+	fhci->vroot_hub->hub.wHubStatus = 0;
+	fhci->vroot_hub->hub.wHubChange = 0;
+	fhci->vroot_hub->port.wPortStatus = 0;
+	fhci->vroot_hub->port.wPortChange = 0;
+
+	hcd->state = HC_STATE_RUNNING;
+
+	/*
+	 * From here on, khubd concurrently accesses the root
+	 * hub; drivers will be talking to enumerated devices.
+	 * (On restart paths, khubd already knows about the root
+	 * hub and could find work as soon as we wrote FLAG_CF.)
+	 *
+	 * Before this point the HC was idle/ready.  After, khubd
+	 * and device drivers may start it running.
+	 */
+	fhci_usb_enable(fhci);
+	return 0;
+err:
+	fhci_mem_free(fhci);
+	return ret;
+}
+
+static void fhci_stop(struct usb_hcd *hcd)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+	fhci_usb_disable_interrupt(fhci->usb_lld);
+	fhci_usb_disable(fhci);
+
+	fhci_usb_free(fhci->usb_lld);
+	fhci->usb_lld = NULL;
+	fhci_mem_free(fhci);
+}
+
+static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+			    gfp_t mem_flags)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	u32 pipe = urb->pipe;
+	int ret;
+	int i;
+	int size = 0;
+	struct urb_priv *urb_priv;
+	unsigned long flags;
+
+	switch (usb_pipetype(pipe)) {
+	case PIPE_CONTROL:
+		/* 1 td fro setup,1 for ack */
+		size = 2;
+	case PIPE_BULK:
+		/* one td for every 4096 bytes(can be upto 8k) */
+		size += urb->transfer_buffer_length / 4096;
+		/* ...add for any remaining bytes... */
+		if ((urb->transfer_buffer_length % 4096) != 0)
+			size++;
+		/* ..and maybe a zero length packet to wrap it up */
+		if (size == 0)
+			size++;
+		else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
+			 && (urb->transfer_buffer_length
+			     % usb_maxpacket(urb->dev, pipe,
+					     usb_pipeout(pipe))) != 0)
+			size++;
+		break;
+	case PIPE_ISOCHRONOUS:
+		size = urb->number_of_packets;
+		if (size <= 0)
+			return -EINVAL;
+		for (i = 0; i < urb->number_of_packets; i++) {
+			urb->iso_frame_desc[i].actual_length = 0;
+			urb->iso_frame_desc[i].status = (u32) (-EXDEV);
+		}
+		break;
+	case PIPE_INTERRUPT:
+		size = 1;
+	}
+
+	/* allocate the private part of the URB */
+	urb_priv = kzalloc(sizeof(*urb_priv), mem_flags);
+	if (!urb_priv)
+		return -ENOMEM;
+
+	/* allocate the private part of the URB */
+	urb_priv->tds = kzalloc(size * sizeof(struct td), mem_flags);
+	if (!urb_priv->tds) {
+		kfree(urb_priv);
+		return -ENOMEM;
+	}
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (ret)
+		goto err;
+
+	/* fill the private part of the URB */
+	urb_priv->num_of_tds = size;
+
+	urb->status = -EINPROGRESS;
+	urb->actual_length = 0;
+	urb->error_count = 0;
+	urb->hcpriv = urb_priv;
+
+	fhci_queue_urb(fhci, urb);
+err:
+	if (ret) {
+		kfree(urb_priv->tds);
+		kfree(urb_priv);
+	}
+	spin_unlock_irqrestore(&fhci->lock, flags);
+	return ret;
+}
+
+/* dequeue FHCI URB */
+static int fhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	struct fhci_usb *usb = fhci->usb_lld;
+	int ret = -EINVAL;
+	unsigned long flags;
+
+	if (!urb || !urb->dev || !urb->dev->bus)
+		goto out;
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (ret)
+		goto out2;
+
+	if (usb->port_status != FHCI_PORT_DISABLED) {
+		struct urb_priv *urb_priv;
+
+		/*
+		 * flag the urb's data for deletion in some upcoming
+		 * SF interrupt's delete list processing
+		 */
+		urb_priv = urb->hcpriv;
+
+		if (!urb_priv || (urb_priv->state == URB_DEL))
+			goto out2;
+
+		urb_priv->state = URB_DEL;
+
+		/* already pending? */
+		urb_priv->ed->state = FHCI_ED_URB_DEL;
+	} else {
+		fhci_urb_complete_free(fhci, urb);
+	}
+
+out2:
+	spin_unlock_irqrestore(&fhci->lock, flags);
+out:
+	return ret;
+}
+
+static void fhci_endpoint_disable(struct usb_hcd *hcd,
+				  struct usb_host_endpoint *ep)
+{
+	struct fhci_hcd *fhci;
+	struct ed *ed;
+	unsigned long flags;
+
+	fhci = hcd_to_fhci(hcd);
+	spin_lock_irqsave(&fhci->lock, flags);
+	ed = ep->hcpriv;
+	if (ed) {
+		while (ed->td_head != NULL) {
+			struct td *td = fhci_remove_td_from_ed(ed);
+			fhci_urb_complete_free(fhci, td->urb);
+		}
+		fhci_recycle_empty_ed(fhci, ed);
+		ep->hcpriv = NULL;
+	}
+	spin_unlock_irqrestore(&fhci->lock, flags);
+}
+
+static int fhci_get_frame_number(struct usb_hcd *hcd)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+	return get_frame_num(fhci);
+}
+
+static const struct hc_driver fhci_driver = {
+	.description = "fsl,usb-fhci",
+	.product_desc = "FHCI HOST Controller",
+	.hcd_priv_size = sizeof(struct fhci_hcd),
+
+	/* generic hardware linkage */
+	.irq = fhci_irq,
+	.flags = HCD_USB11 | HCD_MEMORY,
+
+	/* basic lifecycle operation */
+	.start = fhci_start,
+	.stop = fhci_stop,
+
+	/* managing i/o requests and associated device resources */
+	.urb_enqueue = fhci_urb_enqueue,
+	.urb_dequeue = fhci_urb_dequeue,
+	.endpoint_disable = fhci_endpoint_disable,
+
+	/* scheduling support */
+	.get_frame_number = fhci_get_frame_number,
+
+	/* root hub support */
+	.hub_status_data = fhci_hub_status_data,
+	.hub_control = fhci_hub_control,
+};
+
+static int __devinit of_fhci_probe(struct of_device *ofdev,
+				   const struct of_device_id *ofid)
+{
+	struct device *dev = &ofdev->dev;
+	struct device_node *node = ofdev->node;
+	struct usb_hcd *hcd;
+	struct fhci_hcd *fhci;
+	struct resource usb_regs;
+	unsigned long pram_addr;
+	unsigned int usb_irq;
+	const char *sprop;
+	const u32 *iprop;
+	int size;
+	int ret;
+	int i;
+	int j;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	sprop = of_get_property(node, "mode", NULL);
+	if (sprop && strcmp(sprop, "host"))
+		return -ENODEV;
+
+	hcd = usb_create_hcd(&fhci_driver, dev, dev->bus_id);
+	if (!hcd) {
+		dev_err(dev, "could not create hcd\n");
+		return -ENOMEM;
+	}
+
+	fhci = hcd_to_fhci(hcd);
+	hcd->self.controller = dev;
+	dev_set_drvdata(dev, hcd);
+
+	iprop = of_get_property(node, "hub-power-budget", &size);
+	if (iprop && size == sizeof(*iprop))
+		hcd->power_budget = *iprop;
+
+	/* FHCI registers. */
+	ret = of_address_to_resource(node, 0, &usb_regs);
+	if (ret) {
+		dev_err(dev, "could not get regs\n");
+		goto err_regs;
+	}
+
+	hcd->regs = ioremap(usb_regs.start, usb_regs.end - usb_regs.start + 1);
+	if (!hcd->regs) {
+		dev_err(dev, "could not ioremap regs\n");
+		ret = -ENOMEM;
+		goto err_regs;
+	}
+	fhci->regs = hcd->regs;
+
+	/* Parameter RAM. */
+	iprop = of_get_property(node, "reg", &size);
+	if (!iprop || size < sizeof(*iprop) * 4) {
+		dev_err(dev, "can't get pram offset\n");
+		ret = -EINVAL;
+		goto err_pram;
+	}
+
+	pram_addr = cpm_muram_alloc_fixed(iprop[2], FHCI_PRAM_SIZE);
+	if (IS_ERR_VALUE(pram_addr)) {
+		dev_err(dev, "failed to allocate usb pram\n");
+		ret = -ENOMEM;
+		goto err_pram;
+	}
+	fhci->pram = cpm_muram_addr(pram_addr);
+
+	/* GPIOs and pins */
+	for (i = 0; i < NUM_GPIOS; i++) {
+		int gpio;
+		enum of_gpio_flags flags;
+
+		gpio = of_get_gpio_flags(node, i, &flags);
+		fhci->gpios[i] = gpio;
+		fhci->alow_gpios[i] = flags & OF_GPIO_ACTIVE_LOW;
+
+		if (!gpio_is_valid(gpio)) {
+			if (i < GPIO_SPEED) {
+				dev_err(dev, "incorrect GPIO%d: %d\n",
+					i, gpio);
+				goto err_gpios;
+			} else {
+				dev_info(dev, "assuming board doesn't have "
+					"%s gpio\n", i == GPIO_SPEED ?
+					"speed" : "power");
+				continue;
+			}
+		}
+
+		ret = gpio_request(gpio, dev->bus_id);
+		if (ret) {
+			dev_err(dev, "failed to request gpio %d", i);
+			goto err_gpios;
+		}
+
+		if (i >= GPIO_SPEED) {
+			ret = gpio_direction_output(gpio, 0);
+			if (ret) {
+				dev_err(dev, "failed to set gpio %d as "
+					"an output\n", i);
+				i++;
+				goto err_gpios;
+			}
+		}
+	}
+
+	for (j = 0; j < NUM_PINS; j++) {
+		fhci->pins[j] = qe_pin_request(ofdev->node, j);
+		if (IS_ERR(fhci->pins[j])) {
+			ret = PTR_ERR(fhci->pins[j]);
+			dev_err(dev, "can't get pin %d: %d\n", j, ret);
+			goto err_pins;
+		}
+	}
+
+	/* Frame limit timer and its interrupt. */
+	fhci->timer = gtm_get_timer16();
+	if (IS_ERR(fhci->timer)) {
+		ret = PTR_ERR(fhci->timer);
+		dev_err(dev, "failed to request qe timer: %i", ret);
+		goto err_get_timer;
+	}
+
+	ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq,
+			  IRQF_DISABLED, "qe timer (usb)", hcd);
+	if (ret) {
+		dev_err(dev, "failed to request timer irq");
+		goto err_timer_irq;
+	}
+
+	/* USB Host interrupt. */
+	usb_irq = irq_of_parse_and_map(node, 0);
+	if (usb_irq == NO_IRQ) {
+		dev_err(dev, "could not get usb irq\n");
+		ret = -EINVAL;
+		goto err_usb_irq;
+	}
+
+	/* Clocks. */
+	sprop = of_get_property(node, "fsl,fullspeed-clock", NULL);
+	if (sprop) {
+		fhci->fullspeed_clk = qe_clock_source(sprop);
+		if (fhci->fullspeed_clk == QE_CLK_DUMMY) {
+			dev_err(dev, "wrong fullspeed-clock\n");
+			ret = -EINVAL;
+			goto err_clocks;
+		}
+	}
+
+	sprop = of_get_property(node, "fsl,lowspeed-clock", NULL);
+	if (sprop) {
+		fhci->lowspeed_clk = qe_clock_source(sprop);
+		if (fhci->lowspeed_clk == QE_CLK_DUMMY) {
+			dev_err(dev, "wrong lowspeed-clock\n");
+			ret = -EINVAL;
+			goto err_clocks;
+		}
+	}
+
+	if (fhci->fullspeed_clk == QE_CLK_NONE &&
+			fhci->lowspeed_clk == QE_CLK_NONE) {
+		dev_err(dev, "no clocks specified\n");
+		ret = -EINVAL;
+		goto err_clocks;
+	}
+
+	dev_info(dev, "at 0x%p, irq %d\n", hcd->regs, usb_irq);
+
+	fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+
+	/* Start with full-speed, if possible. */
+	if (fhci->fullspeed_clk != QE_CLK_NONE) {
+		fhci_config_transceiver(fhci, FHCI_PORT_FULL);
+		qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK);
+	} else {
+		fhci_config_transceiver(fhci, FHCI_PORT_LOW);
+		qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3);
+	}
+
+	/* Clear and disable any pending interrupts. */
+	out_be16(&fhci->regs->usb_event, 0xffff);
+	out_be16(&fhci->regs->usb_mask, 0);
+
+	ret = usb_add_hcd(hcd, usb_irq, IRQF_DISABLED);
+	if (ret < 0)
+		goto err_add_hcd;
+
+	fhci_dfs_create(fhci);
+
+	return 0;
+
+err_add_hcd:
+err_clocks:
+	irq_dispose_mapping(usb_irq);
+err_usb_irq:
+	free_irq(fhci->timer->irq, hcd);
+err_timer_irq:
+	gtm_put_timer16(fhci->timer);
+err_get_timer:
+err_pins:
+	while (--j >= 0)
+		qe_pin_free(fhci->pins[j]);
+err_gpios:
+	while (--i >= 0) {
+		if (gpio_is_valid(fhci->gpios[i]))
+			gpio_free(fhci->gpios[i]);
+	}
+	cpm_muram_free(pram_addr);
+err_pram:
+	iounmap(hcd->regs);
+err_regs:
+	usb_put_hcd(hcd);
+	return ret;
+}
+
+static int __devexit fhci_remove(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	int i;
+	int j;
+
+	usb_remove_hcd(hcd);
+	free_irq(fhci->timer->irq, hcd);
+	gtm_put_timer16(fhci->timer);
+	cpm_muram_free(cpm_muram_offset(fhci->pram));
+	for (i = 0; i < NUM_GPIOS; i++) {
+		if (!gpio_is_valid(fhci->gpios[i]))
+			continue;
+		gpio_free(fhci->gpios[i]);
+	}
+	for (j = 0; j < NUM_PINS; j++)
+		qe_pin_free(fhci->pins[j]);
+	fhci_dfs_destroy(fhci);
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+static int __devexit of_fhci_remove(struct of_device *ofdev)
+{
+	return fhci_remove(&ofdev->dev);
+}
+
+static struct of_device_id of_fhci_match[] = {
+	{ .compatible = "fsl,mpc8323-qe-usb", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_fhci_match);
+
+static struct of_platform_driver of_fhci_driver = {
+	.name		= "fsl,usb-fhci",
+	.match_table	= of_fhci_match,
+	.probe		= of_fhci_probe,
+	.remove		= __devexit_p(of_fhci_remove),
+};
+
+static int __init fhci_module_init(void)
+{
+	return of_register_platform_driver(&of_fhci_driver);
+}
+module_init(fhci_module_init);
+
+static void __exit fhci_module_exit(void)
+{
+	of_unregister_platform_driver(&of_fhci_driver);
+}
+module_exit(fhci_module_exit);
+
+MODULE_DESCRIPTION("USB Freescale Host Controller Interface Driver");
+MODULE_AUTHOR("Shlomi Gridish <gridish@freescale.com>, "
+	      "Jerry Huang <Chang-Ming.Huang@freescale.com>, "
+	      "Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c
new file mode 100644
index 00000000000..0cfaedc3e12
--- /dev/null
+++ b/drivers/usb/host/fhci-hub.c
@@ -0,0 +1,345 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/gpio.h>
+#include <asm/qe.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+/* virtual root hub specific descriptor */
+static u8 root_hub_des[] = {
+	0x09, /* blength */
+	0x29, /* bDescriptorType;hub-descriptor */
+	0x01, /* bNbrPorts */
+	0x00, /* wHubCharacteristics */
+	0x00,
+	0x01, /* bPwrOn2pwrGood;2ms */
+	0x00, /* bHubContrCurrent;0mA */
+	0x00, /* DeviceRemoveable */
+	0xff, /* PortPwrCtrlMask */
+};
+
+static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on)
+{
+	int gpio = fhci->gpios[gpio_nr];
+	bool alow = fhci->alow_gpios[gpio_nr];
+
+	if (!gpio_is_valid(gpio))
+		return;
+
+	gpio_set_value(gpio, on ^ alow);
+	mdelay(5);
+}
+
+void fhci_config_transceiver(struct fhci_hcd *fhci,
+			     enum fhci_port_status status)
+{
+	fhci_dbg(fhci, "-> %s: %d\n", __func__, status);
+
+	switch (status) {
+	case FHCI_PORT_POWER_OFF:
+		fhci_gpio_set_value(fhci, GPIO_POWER, false);
+		break;
+	case FHCI_PORT_DISABLED:
+	case FHCI_PORT_WAITING:
+		fhci_gpio_set_value(fhci, GPIO_POWER, true);
+		break;
+	case FHCI_PORT_LOW:
+		fhci_gpio_set_value(fhci, GPIO_SPEED, false);
+		break;
+	case FHCI_PORT_FULL:
+		fhci_gpio_set_value(fhci, GPIO_SPEED, true);
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+
+	fhci_dbg(fhci, "<- %s: %d\n", __func__, status);
+}
+
+/* disable the USB port by clearing the EN bit in the USBMOD register */
+void fhci_port_disable(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld;
+	enum fhci_port_status port_status;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_stop_sof_timer(fhci);
+
+	fhci_flush_all_transmissions(usb);
+
+	fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld);
+	port_status = usb->port_status;
+	usb->port_status = FHCI_PORT_DISABLED;
+
+	/* Enable IDLE since we want to know if something comes along */
+	usb->saved_msk |= USB_E_IDLE_MASK;
+	out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+	/* check if during the disconnection process attached new device */
+	if (port_status == FHCI_PORT_WAITING)
+		fhci_device_connected_interrupt(fhci);
+	usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE;
+	usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE;
+	fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* enable the USB port by setting the EN bit in the USBMOD register */
+void fhci_port_enable(void *lld)
+{
+	struct fhci_usb *usb = (struct fhci_usb *)lld;
+	struct fhci_hcd *fhci = usb->fhci;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_config_transceiver(fhci, usb->port_status);
+
+	if ((usb->port_status != FHCI_PORT_FULL) &&
+			(usb->port_status != FHCI_PORT_LOW))
+		fhci_start_sof_timer(fhci);
+
+	usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE;
+	usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE;
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+void fhci_io_port_generate_reset(struct fhci_hcd *fhci)
+{
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	gpio_direction_output(fhci->gpios[GPIO_USBOE], 0);
+	gpio_direction_output(fhci->gpios[GPIO_USBTP], 0);
+	gpio_direction_output(fhci->gpios[GPIO_USBTN], 0);
+
+	mdelay(5);
+
+	qe_pin_set_dedicated(fhci->pins[PIN_USBOE]);
+	qe_pin_set_dedicated(fhci->pins[PIN_USBTP]);
+	qe_pin_set_dedicated(fhci->pins[PIN_USBTN]);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* generate the RESET condition on the bus */
+void fhci_port_reset(void *lld)
+{
+	struct fhci_usb *usb = (struct fhci_usb *)lld;
+	struct fhci_hcd *fhci = usb->fhci;
+	u8 mode;
+	u16 mask;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_stop_sof_timer(fhci);
+	/* disable the USB controller */
+	mode = in_8(&fhci->regs->usb_mod);
+	out_8(&fhci->regs->usb_mod, mode & (~USB_MODE_EN));
+
+	/* disable idle interrupts */
+	mask = in_be16(&fhci->regs->usb_mask);
+	out_be16(&fhci->regs->usb_mask, mask & (~USB_E_IDLE_MASK));
+
+	fhci_io_port_generate_reset(fhci);
+
+	/* enable interrupt on this endpoint */
+	out_be16(&fhci->regs->usb_mask, mask);
+
+	/* enable the USB controller */
+	mode = in_8(&fhci->regs->usb_mod);
+	out_8(&fhci->regs->usb_mod, mode | USB_MODE_EN);
+	fhci_start_sof_timer(fhci);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+int fhci_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	int ret = 0;
+	unsigned long flags;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION |
+			USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND |
+			USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) {
+		*buf = 1 << 1;
+		ret = 1;
+		fhci_dbg(fhci, "-- %s\n", __func__);
+	}
+
+	spin_unlock_irqrestore(&fhci->lock, flags);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+
+	return ret;
+}
+
+int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+			    u16 wIndex, char *buf, u16 wLength)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	int retval = 0;
+	int len = 0;
+	struct usb_hub_status *hub_status;
+	struct usb_port_status *port_status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	switch (typeReq) {
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		fhci->vroot_hub->feature &= (1 << wValue);
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			fhci->vroot_hub->port.wPortStatus &=
+			    ~USB_PORT_STAT_ENABLE;
+			fhci_port_disable(fhci);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_ENABLE;
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			fhci->vroot_hub->port.wPortStatus &=
+			    ~USB_PORT_STAT_SUSPEND;
+			fhci_stop_sof_timer(fhci);
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_SUSPEND;
+			break;
+		case USB_PORT_FEAT_POWER:
+			fhci->vroot_hub->port.wPortStatus &=
+			    ~USB_PORT_STAT_POWER;
+			fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_CONNECTION;
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_OVERCURRENT;
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_RESET;
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case GetHubDescriptor:
+		memcpy(buf, root_hub_des, sizeof(root_hub_des));
+		buf[3] = 0x11; /* per-port power, no ovrcrnt */
+		len = (buf[0] < wLength) ? buf[0] : wLength;
+		break;
+	case GetHubStatus:
+		hub_status = (struct usb_hub_status *)buf;
+		hub_status->wHubStatus =
+		    cpu_to_le16(fhci->vroot_hub->hub.wHubStatus);
+		hub_status->wHubChange =
+		    cpu_to_le16(fhci->vroot_hub->hub.wHubChange);
+		len = 4;
+		break;
+	case GetPortStatus:
+		port_status = (struct usb_port_status *)buf;
+		port_status->wPortStatus =
+		    cpu_to_le16(fhci->vroot_hub->port.wPortStatus);
+		port_status->wPortChange =
+		    cpu_to_le16(fhci->vroot_hub->port.wPortChange);
+		len = 4;
+		break;
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case SetPortFeature:
+		fhci->vroot_hub->feature |= (1 << wValue);
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_ENABLE;
+			fhci_port_enable(fhci->usb_lld);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_SUSPEND;
+			fhci_stop_sof_timer(fhci);
+			break;
+		case USB_PORT_FEAT_RESET:
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_RESET;
+			fhci_port_reset(fhci->usb_lld);
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_ENABLE;
+			fhci->vroot_hub->port.wPortStatus &=
+			    ~USB_PORT_STAT_RESET;
+			break;
+		case USB_PORT_FEAT_POWER:
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_POWER;
+			fhci_config_transceiver(fhci, FHCI_PORT_WAITING);
+			break;
+		default:
+			goto error;
+		}
+		break;
+	default:
+error:
+		retval = -EPIPE;
+	}
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+
+	spin_unlock_irqrestore(&fhci->lock, flags);
+
+	return retval;
+}
diff --git a/drivers/usb/host/fhci-mem.c b/drivers/usb/host/fhci-mem.c
new file mode 100644
index 00000000000..2c0736c9971
--- /dev/null
+++ b/drivers/usb/host/fhci-mem.c
@@ -0,0 +1,113 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+static void init_td(struct td *td)
+{
+	memset(td, 0, sizeof(*td));
+	INIT_LIST_HEAD(&td->node);
+	INIT_LIST_HEAD(&td->frame_lh);
+}
+
+static void init_ed(struct ed *ed)
+{
+	memset(ed, 0, sizeof(*ed));
+	INIT_LIST_HEAD(&ed->td_list);
+	INIT_LIST_HEAD(&ed->node);
+}
+
+static struct td *get_empty_td(struct fhci_hcd *fhci)
+{
+	struct td *td;
+
+	if (!list_empty(&fhci->empty_tds)) {
+		td = list_entry(fhci->empty_tds.next, struct td, node);
+		list_del(fhci->empty_tds.next);
+	} else {
+		td = kmalloc(sizeof(*td), GFP_ATOMIC);
+		if (!td)
+			fhci_err(fhci, "No memory to allocate to TD\n");
+		else
+			init_td(td);
+	}
+
+	return td;
+}
+
+void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td)
+{
+	init_td(td);
+	list_add(&td->node, &fhci->empty_tds);
+}
+
+struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci)
+{
+	struct ed *ed;
+
+	if (!list_empty(&fhci->empty_eds)) {
+		ed = list_entry(fhci->empty_eds.next, struct ed, node);
+		list_del(fhci->empty_eds.next);
+	} else {
+		ed = kmalloc(sizeof(*ed), GFP_ATOMIC);
+		if (!ed)
+			fhci_err(fhci, "No memory to allocate to ED\n");
+		else
+			init_ed(ed);
+	}
+
+	return ed;
+}
+
+void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed)
+{
+	init_ed(ed);
+	list_add(&ed->node, &fhci->empty_eds);
+}
+
+struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb,
+			struct urb_priv *urb_priv, struct ed *ed, u16 index,
+			enum fhci_ta_type type, int toggle, u8 *data, u32 len,
+			u16 interval, u16 start_frame, bool ioc)
+{
+	struct td *td = get_empty_td(fhci);
+
+	if (!td)
+		return NULL;
+
+	td->urb = urb;
+	td->ed = ed;
+	td->type = type;
+	td->toggle = toggle;
+	td->data = data;
+	td->len = len;
+	td->iso_index = index;
+	td->interval = interval;
+	td->start_frame = start_frame;
+	td->ioc = ioc;
+	td->status = USB_TD_OK;
+
+	urb_priv->tds[index] = td;
+
+	return td;
+}
diff --git a/drivers/usb/host/fhci-q.c b/drivers/usb/host/fhci-q.c
new file mode 100644
index 00000000000..b0a1446ba29
--- /dev/null
+++ b/drivers/usb/host/fhci-q.c
@@ -0,0 +1,284 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+/* maps the hardware error code to the USB error code */
+static int status_to_error(u32 status)
+{
+	if (status == USB_TD_OK)
+		return 0;
+	else if (status & USB_TD_RX_ER_CRC)
+		return -EILSEQ;
+	else if (status & USB_TD_RX_ER_NONOCT)
+		return -EPROTO;
+	else if (status & USB_TD_RX_ER_OVERUN)
+		return -ECOMM;
+	else if (status & USB_TD_RX_ER_BITSTUFF)
+		return -EPROTO;
+	else if (status & USB_TD_RX_ER_PID)
+		return -EILSEQ;
+	else if (status & (USB_TD_TX_ER_NAK | USB_TD_TX_ER_TIMEOUT))
+		return -ETIMEDOUT;
+	else if (status & USB_TD_TX_ER_STALL)
+		return -EPIPE;
+	else if (status & USB_TD_TX_ER_UNDERUN)
+		return -ENOSR;
+	else if (status & USB_TD_RX_DATA_UNDERUN)
+		return -EREMOTEIO;
+	else if (status & USB_TD_RX_DATA_OVERUN)
+		return -EOVERFLOW;
+	else
+		return -EINVAL;
+}
+
+void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td)
+{
+	list_add_tail(&td->frame_lh, &frame->tds_list);
+}
+
+void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number)
+{
+	int i;
+
+	for (i = 0; i < number; i++) {
+		struct td *td = td_list[i];
+		list_add_tail(&td->node, &ed->td_list);
+	}
+	if (ed->td_head == NULL)
+		ed->td_head = td_list[0];
+}
+
+static struct td *peek_td_from_ed(struct ed *ed)
+{
+	struct td *td;
+
+	if (!list_empty(&ed->td_list))
+		td = list_entry(ed->td_list.next, struct td, node);
+	else
+		td = NULL;
+
+	return td;
+}
+
+struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame)
+{
+	struct td *td;
+
+	if (!list_empty(&frame->tds_list)) {
+		td = list_entry(frame->tds_list.next, struct td, frame_lh);
+		list_del_init(frame->tds_list.next);
+	} else
+		td = NULL;
+
+	return td;
+}
+
+struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame)
+{
+	struct td *td;
+
+	if (!list_empty(&frame->tds_list))
+		td = list_entry(frame->tds_list.next, struct td, frame_lh);
+	else
+		td = NULL;
+
+	return td;
+}
+
+struct td *fhci_remove_td_from_ed(struct ed *ed)
+{
+	struct td *td;
+
+	if (!list_empty(&ed->td_list)) {
+		td = list_entry(ed->td_list.next, struct td, node);
+		list_del_init(ed->td_list.next);
+
+		/* if this TD was the ED's head, find next TD */
+		if (!list_empty(&ed->td_list))
+			ed->td_head = list_entry(ed->td_list.next, struct td,
+						 node);
+		else
+			ed->td_head = NULL;
+	} else
+		td = NULL;
+
+	return td;
+}
+
+struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list)
+{
+	struct td *td;
+
+	if (!list_empty(&p_list->done_list)) {
+		td = list_entry(p_list->done_list.next, struct td, node);
+		list_del_init(p_list->done_list.next);
+	} else
+		td = NULL;
+
+	return td;
+}
+
+void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed)
+{
+	struct td *td;
+
+	td = ed->td_head;
+	list_del_init(&td->node);
+
+	/* If this TD was the ED's head,find next TD */
+	if (!list_empty(&ed->td_list))
+		ed->td_head = list_entry(ed->td_list.next, struct td, node);
+	else {
+		ed->td_head = NULL;
+		ed->state = FHCI_ED_SKIP;
+	}
+	ed->toggle_carry = td->toggle;
+	list_add_tail(&td->node, &usb->hc_list->done_list);
+	if (td->ioc)
+		usb->transfer_confirm(usb->fhci);
+}
+
+/* free done FHCI URB resource such as ED and TD */
+static void free_urb_priv(struct fhci_hcd *fhci, struct urb *urb)
+{
+	int i;
+	struct urb_priv *urb_priv = urb->hcpriv;
+	struct ed *ed = urb_priv->ed;
+
+	for (i = 0; i < urb_priv->num_of_tds; i++) {
+		list_del_init(&urb_priv->tds[i]->node);
+		fhci_recycle_empty_td(fhci, urb_priv->tds[i]);
+	}
+
+	/* if this TD was the ED's head,find the next TD */
+	if (!list_empty(&ed->td_list))
+		ed->td_head = list_entry(ed->td_list.next, struct td, node);
+	else
+		ed->td_head = NULL;
+
+	kfree(urb_priv->tds);
+	kfree(urb_priv);
+	urb->hcpriv = NULL;
+
+	/* if this TD was the ED's head,find next TD */
+	if (ed->td_head == NULL)
+		list_del_init(&ed->node);
+	fhci->active_urbs--;
+}
+
+/* this routine called to complete and free done URB */
+void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb)
+{
+	free_urb_priv(fhci, urb);
+
+	if (urb->status == -EINPROGRESS) {
+		if (urb->actual_length != urb->transfer_buffer_length &&
+				urb->transfer_flags & URB_SHORT_NOT_OK)
+			urb->status = -EREMOTEIO;
+		else
+			urb->status = 0;
+	}
+
+	usb_hcd_unlink_urb_from_ep(fhci_to_hcd(fhci), urb);
+
+	spin_unlock(&fhci->lock);
+
+	usb_hcd_giveback_urb(fhci_to_hcd(fhci), urb, urb->status);
+
+	spin_lock(&fhci->lock);
+}
+
+/*
+ * caculate transfer length/stats and update the urb
+ * Precondition: irqsafe(only for urb-?status locking)
+ */
+void fhci_done_td(struct urb *urb, struct td *td)
+{
+	struct ed *ed = td->ed;
+	u32 cc = td->status;
+
+	/* ISO...drivers see per-TD length/status */
+	if (ed->mode == FHCI_TF_ISO) {
+		u32 len;
+		if (!(urb->transfer_flags & URB_SHORT_NOT_OK &&
+				cc == USB_TD_RX_DATA_UNDERUN))
+			cc = USB_TD_OK;
+
+		if (usb_pipeout(urb->pipe))
+			len = urb->iso_frame_desc[td->iso_index].length;
+		else
+			len = td->actual_len;
+
+		urb->actual_length += len;
+		urb->iso_frame_desc[td->iso_index].actual_length = len;
+		urb->iso_frame_desc[td->iso_index].status =
+			status_to_error(cc);
+	}
+
+	/* BULK,INT,CONTROL... drivers see aggregate length/status,
+	 * except that "setup" bytes aren't counted and "short" transfers
+	 * might not be reported as errors.
+	 */
+	else {
+		if (td->error_cnt >= 3)
+			urb->error_count = 3;
+
+		/* control endpoint only have soft stalls */
+
+		/* update packet status if needed(short may be ok) */
+		if (!(urb->transfer_flags & URB_SHORT_NOT_OK) &&
+				cc == USB_TD_RX_DATA_UNDERUN) {
+			ed->state = FHCI_ED_OPER;
+			cc = USB_TD_OK;
+		}
+		if (cc != USB_TD_OK) {
+			if (urb->status == -EINPROGRESS)
+				urb->status = status_to_error(cc);
+		}
+
+		/* count all non-empty packets except control SETUP packet */
+		if (td->type != FHCI_TA_SETUP || td->iso_index != 0)
+			urb->actual_length += td->actual_len;
+	}
+}
+
+/* there are some pedning request to unlink */
+void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed)
+{
+	struct td *td = peek_td_from_ed(ed);
+	struct urb *urb = td->urb;
+	struct urb_priv *urb_priv = urb->hcpriv;
+
+	if (urb_priv->state == URB_DEL) {
+		td = fhci_remove_td_from_ed(ed);
+		/* HC may have partly processed this TD */
+		if (td->status != USB_TD_INPROGRESS)
+			fhci_done_td(urb, td);
+
+		/* URB is done;clean up */
+		if (++(urb_priv->tds_cnt) == urb_priv->num_of_tds)
+			fhci_urb_complete_free(fhci, urb);
+	}
+}
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
new file mode 100644
index 00000000000..bb63b68ddb7
--- /dev/null
+++ b/drivers/usb/host/fhci-sched.c
@@ -0,0 +1,888 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <asm/qe.h>
+#include <asm/fsl_gtm.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+static void recycle_frame(struct fhci_usb *usb, struct packet *pkt)
+{
+	pkt->data = NULL;
+	pkt->len = 0;
+	pkt->status = USB_TD_OK;
+	pkt->info = 0;
+	pkt->priv_data = NULL;
+
+	cq_put(usb->ep0->empty_frame_Q, pkt);
+}
+
+/* confirm submitted packet */
+void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt)
+{
+	struct td *td;
+	struct packet *td_pkt;
+	struct ed *ed;
+	u32 trans_len;
+	bool td_done = false;
+
+	td = fhci_remove_td_from_frame(usb->actual_frame);
+	td_pkt = td->pkt;
+	trans_len = pkt->len;
+	td->status = pkt->status;
+	if (td->type == FHCI_TA_IN && td_pkt->info & PKT_DUMMY_PACKET) {
+		if ((td->data + td->actual_len) && trans_len)
+			memcpy(td->data + td->actual_len, pkt->data,
+			       trans_len);
+		cq_put(usb->ep0->dummy_packets_Q, pkt->data);
+	}
+
+	recycle_frame(usb, pkt);
+
+	ed = td->ed;
+	if (ed->mode == FHCI_TF_ISO) {
+		if (ed->td_list.next->next != &ed->td_list) {
+			struct td *td_next =
+			    list_entry(ed->td_list.next->next, struct td,
+				       node);
+
+			td_next->start_frame = usb->actual_frame->frame_num;
+		}
+		td->actual_len = trans_len;
+		td_done = true;
+	} else if ((td->status & USB_TD_ERROR) &&
+			!(td->status & USB_TD_TX_ER_NAK)) {
+		/*
+		 * There was an error on the transaction (but not NAK).
+		 * If it is fatal error (data underrun, stall, bad pid or 3
+		 * errors exceeded), mark this TD as done.
+		 */
+		if ((td->status & USB_TD_RX_DATA_UNDERUN) ||
+				(td->status & USB_TD_TX_ER_STALL) ||
+				(td->status & USB_TD_RX_ER_PID) ||
+				(++td->error_cnt >= 3)) {
+			ed->state = FHCI_ED_HALTED;
+			td_done = true;
+
+			if (td->status & USB_TD_RX_DATA_UNDERUN) {
+				fhci_dbg(usb->fhci, "td err fu\n");
+				td->toggle = !td->toggle;
+				td->actual_len += trans_len;
+			} else {
+				fhci_dbg(usb->fhci, "td err f!u\n");
+			}
+		} else {
+			fhci_dbg(usb->fhci, "td err !f\n");
+			/* it is not a fatal error -retry this transaction */
+			td->nak_cnt = 0;
+			td->error_cnt++;
+			td->status = USB_TD_OK;
+		}
+	} else if (td->status & USB_TD_TX_ER_NAK) {
+		/* there was a NAK response */
+		fhci_vdbg(usb->fhci, "td nack\n");
+		td->nak_cnt++;
+		td->error_cnt = 0;
+		td->status = USB_TD_OK;
+	} else {
+		/* there was no error on transaction */
+		td->error_cnt = 0;
+		td->nak_cnt = 0;
+		td->toggle = !td->toggle;
+		td->actual_len += trans_len;
+
+		if (td->len == td->actual_len)
+			td_done = true;
+	}
+
+	if (td_done)
+		fhci_move_td_from_ed_to_done_list(usb, ed);
+}
+
+/*
+ * Flush all transmitted packets from BDs
+ * This routine is called when disabling the USB port to flush all
+ * transmissions that are allready scheduled in the BDs
+ */
+void fhci_flush_all_transmissions(struct fhci_usb *usb)
+{
+	u8 mode;
+	struct td *td;
+
+	mode = in_8(&usb->fhci->regs->usb_mod);
+	clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+	fhci_flush_bds(usb);
+
+	while ((td = fhci_peek_td_from_frame(usb->actual_frame)) != NULL) {
+		struct packet *pkt = td->pkt;
+
+		pkt->status = USB_TD_TX_ER_TIMEOUT;
+		fhci_transaction_confirm(usb, pkt);
+	}
+
+	usb->actual_frame->frame_status = FRAME_END_TRANSMISSION;
+
+	/* reset the event register */
+	out_be16(&usb->fhci->regs->usb_event, 0xffff);
+	/* enable the USB controller */
+	out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN);
+}
+
+/*
+ * This function forms the packet and transmit the packet. This function
+ * will handle all endpoint type:ISO,interrupt,control and bulk
+ */
+static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td)
+{
+	u32 fw_transaction_time, len = 0;
+	struct packet *pkt;
+	u8 *data = NULL;
+
+	/* calcalate data address,len and toggle and then add the transaction */
+	if (td->toggle == USB_TD_TOGGLE_CARRY)
+		td->toggle = ed->toggle_carry;
+
+	switch (ed->mode) {
+	case FHCI_TF_ISO:
+		len = td->len;
+		if (td->type != FHCI_TA_IN)
+			data = td->data;
+		break;
+	case FHCI_TF_CTRL:
+	case FHCI_TF_BULK:
+		len = min(td->len - td->actual_len, ed->max_pkt_size);
+		if (!((td->type == FHCI_TA_IN) &&
+		      ((len + td->actual_len) == td->len)))
+			data = td->data + td->actual_len;
+		break;
+	case FHCI_TF_INTR:
+		len = min(td->len, ed->max_pkt_size);
+		if (!((td->type == FHCI_TA_IN) &&
+		      ((td->len + CRC_SIZE) >= ed->max_pkt_size)))
+			data = td->data;
+		break;
+	default:
+		break;
+	}
+
+	if (usb->port_status == FHCI_PORT_FULL)
+		fw_transaction_time = (((len + PROTOCOL_OVERHEAD) * 11) >> 4);
+	else
+		fw_transaction_time = ((len + PROTOCOL_OVERHEAD) * 6);
+
+	/* check if there's enough space in this frame to submit this TD */
+	if (usb->actual_frame->total_bytes + len + PROTOCOL_OVERHEAD >=
+			usb->max_bytes_per_frame) {
+		fhci_vdbg(usb->fhci, "not enough space in this frame: "
+			  "%d %d %d\n", usb->actual_frame->total_bytes, len,
+			  usb->max_bytes_per_frame);
+		return -1;
+	}
+
+	/* check if there's enough time in this frame to submit this TD */
+	if (usb->actual_frame->frame_status != FRAME_IS_PREPARED &&
+	    (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION ||
+	     (fw_transaction_time + usb->sw_transaction_time >=
+	      1000 - fhci_get_sof_timer_count(usb)))) {
+		fhci_dbg(usb->fhci, "not enough time in this frame\n");
+		return -1;
+	}
+
+	/* update frame object fields before transmitting */
+	pkt = cq_get(usb->ep0->empty_frame_Q);
+	if (!pkt) {
+		fhci_dbg(usb->fhci, "there is no empty frame\n");
+		return -1;
+	}
+	td->pkt = pkt;
+
+	pkt->info = 0;
+	if (data == NULL) {
+		data = cq_get(usb->ep0->dummy_packets_Q);
+		BUG_ON(!data);
+		pkt->info = PKT_DUMMY_PACKET;
+	}
+	pkt->data = data;
+	pkt->len = len;
+	pkt->status = USB_TD_OK;
+	/* update TD status field before transmitting */
+	td->status = USB_TD_INPROGRESS;
+	/* update actual frame time object with the actual transmission */
+	usb->actual_frame->total_bytes += (len + PROTOCOL_OVERHEAD);
+	fhci_add_td_to_frame(usb->actual_frame, td);
+
+	if (usb->port_status != FHCI_PORT_FULL &&
+			usb->port_status != FHCI_PORT_LOW) {
+		pkt->status = USB_TD_TX_ER_TIMEOUT;
+		pkt->len = 0;
+		fhci_transaction_confirm(usb, pkt);
+	} else if (fhci_host_transaction(usb, pkt, td->type, ed->dev_addr,
+			ed->ep_addr, ed->mode, ed->speed, td->toggle)) {
+		/* remove TD from actual frame */
+		list_del_init(&td->frame_lh);
+		td->status = USB_TD_OK;
+		if (pkt->info & PKT_DUMMY_PACKET)
+			cq_put(usb->ep0->dummy_packets_Q, pkt->data);
+		recycle_frame(usb, pkt);
+		usb->actual_frame->total_bytes -= (len + PROTOCOL_OVERHEAD);
+		fhci_err(usb->fhci, "host transaction failed\n");
+		return -1;
+	}
+
+	return len;
+}
+
+static void move_head_to_tail(struct list_head *list)
+{
+	struct list_head *node = list->next;
+
+	if (!list_empty(list)) {
+		list_del(node);
+		list_add_tail(node, list);
+	}
+}
+
+/*
+ * This function goes through the endpoint list and schedules the
+ * transactions within this list
+ */
+static int scan_ed_list(struct fhci_usb *usb,
+			struct list_head *list, enum fhci_tf_mode list_type)
+{
+	static const int frame_part[4] = {
+		[FHCI_TF_CTRL] = MAX_BYTES_PER_FRAME,
+		[FHCI_TF_ISO] = (MAX_BYTES_PER_FRAME *
+				 MAX_PERIODIC_FRAME_USAGE) / 100,
+		[FHCI_TF_BULK] = MAX_BYTES_PER_FRAME,
+		[FHCI_TF_INTR] = (MAX_BYTES_PER_FRAME *
+				  MAX_PERIODIC_FRAME_USAGE) / 100
+	};
+	struct ed *ed;
+	struct td *td;
+	int ans = 1;
+	u32 save_transaction_time = usb->sw_transaction_time;
+
+	list_for_each_entry(ed, list, node) {
+		td = ed->td_head;
+
+		if (!td || (td && td->status == USB_TD_INPROGRESS))
+			continue;
+
+		if (ed->state != FHCI_ED_OPER) {
+			if (ed->state == FHCI_ED_URB_DEL) {
+				td->status = USB_TD_OK;
+				fhci_move_td_from_ed_to_done_list(usb, ed);
+				ed->state = FHCI_ED_SKIP;
+			}
+			continue;
+		}
+
+		/*
+		 * if it isn't interrupt pipe or it is not iso pipe and the
+		 * interval time passed
+		 */
+		if ((list_type == FHCI_TF_INTR || list_type == FHCI_TF_ISO) &&
+				(((usb->actual_frame->frame_num -
+				   td->start_frame) & 0x7ff) < td->interval))
+			continue;
+
+		if (add_packet(usb, ed, td) < 0)
+			continue;
+
+		/* update time stamps in the TD */
+		td->start_frame = usb->actual_frame->frame_num;
+		usb->sw_transaction_time += save_transaction_time;
+
+		if (usb->actual_frame->total_bytes >=
+					usb->max_bytes_per_frame) {
+			usb->actual_frame->frame_status =
+				FRAME_DATA_END_TRANSMISSION;
+			fhci_push_dummy_bd(usb->ep0);
+			ans = 0;
+			break;
+		}
+
+		if (usb->actual_frame->total_bytes >= frame_part[list_type])
+			break;
+	}
+
+	/* be fair to each ED(move list head around) */
+	move_head_to_tail(list);
+	usb->sw_transaction_time = save_transaction_time;
+
+	return ans;
+}
+
+static u32 rotate_frames(struct fhci_usb *usb)
+{
+	struct fhci_hcd *fhci = usb->fhci;
+
+	if (!list_empty(&usb->actual_frame->tds_list)) {
+		if ((((in_be16(&fhci->pram->frame_num) & 0x07ff) -
+		      usb->actual_frame->frame_num) & 0x7ff) > 5)
+			fhci_flush_actual_frame(usb);
+		else
+			return -EINVAL;
+	}
+
+	usb->actual_frame->frame_status = FRAME_IS_PREPARED;
+	usb->actual_frame->frame_num = in_be16(&fhci->pram->frame_num) & 0x7ff;
+	usb->actual_frame->total_bytes = 0;
+
+	return 0;
+}
+
+/*
+ * This function schedule the USB transaction and will process the
+ * endpoint in the following order: iso, interrupt, control and bulk.
+ */
+void fhci_schedule_transactions(struct fhci_usb *usb)
+{
+	int left = 1;
+
+	if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)
+		if (rotate_frames(usb) != 0)
+			return;
+
+	if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)
+		return;
+
+	if (usb->actual_frame->total_bytes == 0) {
+		/*
+		 * schedule the next available ISO transfer
+		 *or next stage of the ISO transfer
+		 */
+		scan_ed_list(usb, &usb->hc_list->iso_list, FHCI_TF_ISO);
+
+		/*
+		 * schedule the next available interrupt transfer or
+		 * the next stage of the interrupt transfer
+		 */
+		scan_ed_list(usb, &usb->hc_list->intr_list, FHCI_TF_INTR);
+
+		/*
+		 * schedule the next available control transfer
+		 * or the next stage of the control transfer
+		 */
+		left = scan_ed_list(usb, &usb->hc_list->ctrl_list,
+				    FHCI_TF_CTRL);
+	}
+
+	/*
+	 * schedule the next available bulk transfer or the next stage of the
+	 * bulk transfer
+	 */
+	if (left > 0)
+		scan_ed_list(usb, &usb->hc_list->bulk_list, FHCI_TF_BULK);
+}
+
+/* Handles SOF interrupt */
+static void sof_interrupt(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	if ((usb->port_status == FHCI_PORT_DISABLED) &&
+	    (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_CONNECTION) &&
+	    !(usb->vroot_hub->port.wPortChange & USB_PORT_STAT_C_CONNECTION)) {
+		if (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_LOW_SPEED)
+			usb->port_status = FHCI_PORT_LOW;
+		else
+			usb->port_status = FHCI_PORT_FULL;
+		/* Disable IDLE */
+		usb->saved_msk &= ~USB_E_IDLE_MASK;
+		out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+	}
+
+	gtm_set_exact_timer16(fhci->timer, usb->max_frame_usage, false);
+
+	fhci_host_transmit_actual_frame(usb);
+	usb->actual_frame->frame_status = FRAME_IS_TRANSMITTED;
+
+	fhci_schedule_transactions(usb);
+}
+
+/* Handles device disconnected interrupt on port */
+void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_usb_disable_interrupt(usb);
+	clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+	usb->port_status = FHCI_PORT_DISABLED;
+
+	fhci_stop_sof_timer(fhci);
+
+	/* Enable IDLE since we want to know if something comes along */
+	usb->saved_msk |= USB_E_IDLE_MASK;
+	out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+	usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_CONNECTION;
+	usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_CONNECTION;
+	usb->max_bytes_per_frame = 0;
+	fhci_usb_enable_interrupt(usb);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* detect a new device connected on the USB port */
+void fhci_device_connected_interrupt(struct fhci_hcd *fhci)
+{
+
+	struct fhci_usb *usb = fhci->usb_lld;
+	int state;
+	int ret;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_usb_disable_interrupt(usb);
+	state = fhci_ioports_check_bus_state(fhci);
+
+	/* low-speed device was connected to the USB port */
+	if (state == 1) {
+		ret = qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3);
+		if (ret) {
+			fhci_warn(fhci, "Low-Speed device is not supported, "
+				  "try use BRGx\n");
+			goto out;
+		}
+
+		usb->port_status = FHCI_PORT_LOW;
+		setbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+		usb->vroot_hub->port.wPortStatus |=
+		    (USB_PORT_STAT_LOW_SPEED |
+		     USB_PORT_STAT_CONNECTION);
+		usb->vroot_hub->port.wPortChange |=
+		    USB_PORT_STAT_C_CONNECTION;
+		usb->max_bytes_per_frame =
+		    (MAX_BYTES_PER_FRAME >> 3) - 7;
+		fhci_port_enable(usb);
+	} else if (state == 2) {
+		ret = qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK);
+		if (ret) {
+			fhci_warn(fhci, "Full-Speed device is not supported, "
+				  "try use CLKx\n");
+			goto out;
+		}
+
+		usb->port_status = FHCI_PORT_FULL;
+		clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+		usb->vroot_hub->port.wPortStatus &=
+		    ~USB_PORT_STAT_LOW_SPEED;
+		usb->vroot_hub->port.wPortStatus |=
+		    USB_PORT_STAT_CONNECTION;
+		usb->vroot_hub->port.wPortChange |=
+		    USB_PORT_STAT_C_CONNECTION;
+		usb->max_bytes_per_frame = (MAX_BYTES_PER_FRAME - 15);
+		fhci_port_enable(usb);
+	}
+out:
+	fhci_usb_enable_interrupt(usb);
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd)
+{
+	struct usb_hcd *hcd = _hcd;
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	spin_lock(&fhci->lock);
+
+	gtm_set_exact_timer16(fhci->timer, 1000, false);
+
+	if (usb->actual_frame->frame_status == FRAME_IS_TRANSMITTED) {
+		usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION;
+		fhci_push_dummy_bd(usb->ep0);
+	}
+
+	fhci_schedule_transactions(usb);
+
+	spin_unlock(&fhci->lock);
+
+	return IRQ_HANDLED;
+}
+
+/* Cancel transmission on the USB endpoint */
+static void abort_transmission(struct fhci_usb *usb)
+{
+	fhci_dbg(usb->fhci, "-> %s\n", __func__);
+	/* issue stop Tx command */
+	qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0);
+	/* flush Tx FIFOs */
+	out_8(&usb->fhci->regs->usb_comm, USB_CMD_FLUSH_FIFO | EP_ZERO);
+	udelay(1000);
+	/* reset Tx BDs */
+	fhci_flush_bds(usb);
+	/* issue restart Tx command */
+	qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0);
+	fhci_dbg(usb->fhci, "<- %s\n", __func__);
+}
+
+irqreturn_t fhci_irq(struct usb_hcd *hcd)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	struct fhci_usb *usb;
+	u16 usb_er = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	usb = fhci->usb_lld;
+
+	usb_er |= in_be16(&usb->fhci->regs->usb_event) &
+		  in_be16(&usb->fhci->regs->usb_mask);
+
+	/* clear event bits for next time */
+	out_be16(&usb->fhci->regs->usb_event, usb_er);
+
+	fhci_dbg_isr(fhci, usb_er);
+
+	if (usb_er & USB_E_RESET_MASK) {
+		if ((usb->port_status == FHCI_PORT_FULL) ||
+				(usb->port_status == FHCI_PORT_LOW)) {
+			fhci_device_disconnected_interrupt(fhci);
+			usb_er &= ~USB_E_IDLE_MASK;
+		} else if (usb->port_status == FHCI_PORT_WAITING) {
+			usb->port_status = FHCI_PORT_DISCONNECTING;
+
+			/* Turn on IDLE since we want to disconnect */
+			usb->saved_msk |= USB_E_IDLE_MASK;
+			out_be16(&usb->fhci->regs->usb_event,
+				 usb->saved_msk);
+		} else if (usb->port_status == FHCI_PORT_DISABLED) {
+			if (fhci_ioports_check_bus_state(fhci) == 1 &&
+					usb->port_status != FHCI_PORT_LOW &&
+					usb->port_status != FHCI_PORT_FULL)
+				fhci_device_connected_interrupt(fhci);
+		}
+		usb_er &= ~USB_E_RESET_MASK;
+	}
+
+	if (usb_er & USB_E_MSF_MASK) {
+		abort_transmission(fhci->usb_lld);
+		usb_er &= ~USB_E_MSF_MASK;
+	}
+
+	if (usb_er & (USB_E_SOF_MASK | USB_E_SFT_MASK)) {
+		sof_interrupt(fhci);
+		usb_er &= ~(USB_E_SOF_MASK | USB_E_SFT_MASK);
+	}
+
+	if (usb_er & USB_E_TXB_MASK) {
+		fhci_tx_conf_interrupt(fhci->usb_lld);
+		usb_er &= ~USB_E_TXB_MASK;
+	}
+
+	if (usb_er & USB_E_TXE1_MASK) {
+		fhci_tx_conf_interrupt(fhci->usb_lld);
+		usb_er &= ~USB_E_TXE1_MASK;
+	}
+
+	if (usb_er & USB_E_IDLE_MASK) {
+		if (usb->port_status == FHCI_PORT_DISABLED &&
+				usb->port_status != FHCI_PORT_LOW &&
+				usb->port_status != FHCI_PORT_FULL) {
+			usb_er &= ~USB_E_RESET_MASK;
+			fhci_device_connected_interrupt(fhci);
+		} else if (usb->port_status ==
+				FHCI_PORT_DISCONNECTING) {
+			/* XXX usb->port_status = FHCI_PORT_WAITING; */
+			/* Disable IDLE */
+			usb->saved_msk &= ~USB_E_IDLE_MASK;
+			out_be16(&usb->fhci->regs->usb_mask,
+				 usb->saved_msk);
+		} else {
+			fhci_dbg_isr(fhci, -1);
+		}
+
+		usb_er &= ~USB_E_IDLE_MASK;
+	}
+
+	spin_unlock_irqrestore(&fhci->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+
+/*
+ * Process normal completions(error or sucess) and clean the schedule.
+ *
+ * This is the main path for handing urbs back to drivers. The only other patth
+ * is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning
+ * the (re-reversed) done list as this does.
+ */
+static void process_done_list(unsigned long data)
+{
+	struct urb *urb;
+	struct ed *ed;
+	struct td *td;
+	struct urb_priv *urb_priv;
+	struct fhci_hcd *fhci = (struct fhci_hcd *)data;
+
+	disable_irq(fhci->timer->irq);
+	disable_irq(fhci_to_hcd(fhci)->irq);
+	spin_lock(&fhci->lock);
+
+	td = fhci_remove_td_from_done_list(fhci->hc_list);
+	while (td != NULL) {
+		urb = td->urb;
+		urb_priv = urb->hcpriv;
+		ed = td->ed;
+
+		/* update URB's length and status from TD */
+		fhci_done_td(urb, td);
+		urb_priv->tds_cnt++;
+
+		/*
+		 * if all this urb's TDs are done, call complete()
+		 * Interrupt transfers are the onley special case:
+		 * they are reissued,until "deleted" by usb_unlink_urb
+		 * (real work done in a SOF intr, by process_del_list)
+		 */
+		if (urb_priv->tds_cnt == urb_priv->num_of_tds) {
+			fhci_urb_complete_free(fhci, urb);
+		} else if (urb_priv->state == URB_DEL &&
+				ed->state == FHCI_ED_SKIP) {
+			fhci_del_ed_list(fhci, ed);
+			ed->state = FHCI_ED_OPER;
+		} else if (ed->state == FHCI_ED_HALTED) {
+			urb_priv->state = URB_DEL;
+			ed->state = FHCI_ED_URB_DEL;
+			fhci_del_ed_list(fhci, ed);
+			ed->state = FHCI_ED_OPER;
+		}
+
+		td = fhci_remove_td_from_done_list(fhci->hc_list);
+	}
+
+	spin_unlock(&fhci->lock);
+	enable_irq(fhci->timer->irq);
+	enable_irq(fhci_to_hcd(fhci)->irq);
+}
+
+DECLARE_TASKLET(fhci_tasklet, process_done_list, 0);
+
+/* transfer complted callback */
+u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci)
+{
+	if (!fhci->process_done_task->state)
+		tasklet_schedule(fhci->process_done_task);
+	return 0;
+}
+
+/*
+ * adds urb to the endpoint descriptor list
+ * arguments:
+ * fhci		data structure for the Low level host controller
+ * ep		USB Host endpoint data structure
+ * urb		USB request block data structure
+ */
+void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb)
+{
+	struct ed *ed = urb->ep->hcpriv;
+	struct urb_priv *urb_priv = urb->hcpriv;
+	u32 data_len = urb->transfer_buffer_length;
+	int urb_state = 0;
+	int toggle = 0;
+	struct td *td;
+	u8 *data;
+	u16 cnt = 0;
+
+	if (ed == NULL) {
+		ed = fhci_get_empty_ed(fhci);
+		ed->dev_addr = usb_pipedevice(urb->pipe);
+		ed->ep_addr = usb_pipeendpoint(urb->pipe);
+		switch (usb_pipetype(urb->pipe)) {
+		case PIPE_CONTROL:
+			ed->mode = FHCI_TF_CTRL;
+			break;
+		case PIPE_BULK:
+			ed->mode = FHCI_TF_BULK;
+			break;
+		case PIPE_INTERRUPT:
+			ed->mode = FHCI_TF_INTR;
+			break;
+		case PIPE_ISOCHRONOUS:
+			ed->mode = FHCI_TF_ISO;
+			break;
+		default:
+			break;
+		}
+		ed->speed = (urb->dev->speed == USB_SPEED_LOW) ?
+			FHCI_LOW_SPEED : FHCI_FULL_SPEED;
+		ed->max_pkt_size = usb_maxpacket(urb->dev,
+			urb->pipe, usb_pipeout(urb->pipe));
+		urb->ep->hcpriv = ed;
+		fhci_dbg(fhci, "new ep speed=%d max_pkt_size=%d\n",
+			 ed->speed, ed->max_pkt_size);
+	}
+
+	/* for ISO transfer calculate start frame index */
+	if (ed->mode == FHCI_TF_ISO && urb->transfer_flags & URB_ISO_ASAP)
+		urb->start_frame = ed->td_head ? ed->last_iso + 1 :
+						 get_frame_num(fhci);
+
+	/*
+	 * OHCI handles the DATA toggle itself,we just use the USB
+	 * toggle bits
+	 */
+	if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			  usb_pipeout(urb->pipe)))
+		toggle = USB_TD_TOGGLE_CARRY;
+	else {
+		toggle = USB_TD_TOGGLE_DATA0;
+		usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			      usb_pipeout(urb->pipe), 1);
+	}
+
+	urb_priv->tds_cnt = 0;
+	urb_priv->ed = ed;
+	if (data_len > 0)
+		data = urb->transfer_buffer;
+	else
+		data = NULL;
+
+	switch (ed->mode) {
+	case FHCI_TF_BULK:
+		if (urb->transfer_flags & URB_ZERO_PACKET &&
+				urb->transfer_buffer_length > 0 &&
+				((urb->transfer_buffer_length %
+				usb_maxpacket(urb->dev, urb->pipe,
+				usb_pipeout(urb->pipe))) == 0))
+			urb_state = US_BULK0;
+		while (data_len > 4096) {
+			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+							 FHCI_TA_IN,
+				cnt ? USB_TD_TOGGLE_CARRY :
+				      toggle,
+				data, 4096, 0, 0, true);
+			data += 4096;
+			data_len -= 4096;
+			cnt++;
+		}
+
+		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+			usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN,
+			cnt ? USB_TD_TOGGLE_CARRY : toggle,
+			data, data_len, 0, 0, true);
+		cnt++;
+
+		if (urb->transfer_flags & URB_ZERO_PACKET &&
+				cnt < urb_priv->num_of_tds) {
+			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+							 FHCI_TA_IN,
+				USB_TD_TOGGLE_CARRY, NULL, 0, 0, 0, true);
+			cnt++;
+		}
+		break;
+	case FHCI_TF_INTR:
+		urb->start_frame = get_frame_num(fhci) + 1;
+		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+			usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN,
+			USB_TD_TOGGLE_DATA0, data, data_len,
+			urb->interval, urb->start_frame, true);
+		break;
+	case FHCI_TF_CTRL:
+		ed->dev_addr = usb_pipedevice(urb->pipe);
+		ed->max_pkt_size = usb_maxpacket(urb->dev, urb->pipe,
+			usb_pipeout(urb->pipe));
+		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, FHCI_TA_SETUP,
+			USB_TD_TOGGLE_DATA0, urb->setup_packet, 8, 0, 0, true);
+
+		if (data_len > 0) {
+			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+							 FHCI_TA_IN,
+				USB_TD_TOGGLE_DATA1, data, data_len, 0, 0,
+				true);
+		}
+		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+			usb_pipeout(urb->pipe) ? FHCI_TA_IN : FHCI_TA_OUT,
+			USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true);
+		urb_state = US_CTRL_SETUP;
+		break;
+	case FHCI_TF_ISO:
+		for (cnt = 0; cnt < urb->number_of_packets; cnt++) {
+			u16 frame = urb->start_frame;
+
+			/*
+			 * FIXME scheduling should handle frame counter
+			 * roll-around ... exotic case (and OHCI has
+			 * a 2^16 iso range, vs other HCs max of 2^10)
+			 */
+			frame += cnt * urb->interval;
+			frame &= 0x07ff;
+			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+							 FHCI_TA_IN,
+				USB_TD_TOGGLE_DATA0,
+				data + urb->iso_frame_desc[cnt].offset,
+				urb->iso_frame_desc[cnt].length,
+				urb->interval, frame, true);
+		}
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * set the state of URB
+	 * control pipe:3 states -- setup,data,status
+	 * interrupt and bulk pipe:1 state -- data
+	 */
+	urb->pipe &= ~0x1f;
+	urb->pipe |= urb_state & 0x1f;
+
+	urb_priv->state = URB_INPROGRESS;
+
+	if (!ed->td_head) {
+		ed->state = FHCI_ED_OPER;
+		switch (ed->mode) {
+		case FHCI_TF_CTRL:
+			list_add(&ed->node, &fhci->hc_list->ctrl_list);
+			break;
+		case FHCI_TF_BULK:
+			list_add(&ed->node, &fhci->hc_list->bulk_list);
+			break;
+		case FHCI_TF_INTR:
+			list_add(&ed->node, &fhci->hc_list->intr_list);
+			break;
+		case FHCI_TF_ISO:
+			list_add(&ed->node, &fhci->hc_list->iso_list);
+			break;
+		default:
+			break;
+		}
+	}
+
+	fhci_add_tds_to_ed(ed, urb_priv->tds, urb_priv->num_of_tds);
+	fhci->active_urbs++;
+}
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
new file mode 100644
index 00000000000..b4033229031
--- /dev/null
+++ b/drivers/usb/host/fhci-tds.c
@@ -0,0 +1,626 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+#define DUMMY_BD_BUFFER  0xdeadbeef
+#define DUMMY2_BD_BUFFER 0xbaadf00d
+
+/* Transaction Descriptors bits */
+#define TD_R		0x8000 /* ready bit */
+#define TD_W		0x2000 /* wrap bit */
+#define TD_I		0x1000 /* interrupt on completion */
+#define TD_L		0x0800 /* last */
+#define TD_TC		0x0400 /* transmit CRC */
+#define TD_CNF		0x0200 /* CNF - Must be always 1 */
+#define TD_LSP		0x0100 /* Low-speed transaction */
+#define TD_PID		0x00c0 /* packet id */
+#define TD_RXER		0x0020 /* Rx error or not */
+
+#define TD_NAK		0x0010 /* No ack. */
+#define TD_STAL		0x0008 /* Stall recieved */
+#define TD_TO		0x0004 /* time out */
+#define TD_UN		0x0002 /* underrun */
+#define TD_NO		0x0010 /* Rx Non Octet Aligned Packet */
+#define TD_AB		0x0008 /* Frame Aborted */
+#define TD_CR		0x0004 /* CRC Error */
+#define TD_OV		0x0002 /* Overrun */
+#define TD_BOV		0x0001 /* Buffer Overrun */
+
+#define TD_ERRORS	(TD_NAK | TD_STAL | TD_TO | TD_UN | \
+			 TD_NO | TD_AB | TD_CR | TD_OV | TD_BOV)
+
+#define TD_PID_DATA0	0x0080 /* Data 0 toggle */
+#define TD_PID_DATA1	0x00c0 /* Data 1 toggle */
+#define TD_PID_TOGGLE	0x00c0 /* Data 0/1 toggle mask */
+
+#define TD_TOK_SETUP	0x0000
+#define TD_TOK_OUT	0x4000
+#define TD_TOK_IN	0x8000
+#define TD_ISO		0x1000
+#define TD_ENDP		0x0780
+#define TD_ADDR		0x007f
+
+#define TD_ENDP_SHIFT 7
+
+struct usb_td {
+	__be16 status;
+	__be16 length;
+	__be32 buf_ptr;
+	__be16 extra;
+	__be16 reserved;
+};
+
+static struct usb_td __iomem *next_bd(struct usb_td __iomem *base,
+				      struct usb_td __iomem *td,
+				      u16 status)
+{
+	if (status & TD_W)
+		return base;
+	else
+		return ++td;
+}
+
+void fhci_push_dummy_bd(struct endpoint *ep)
+{
+	if (ep->already_pushed_dummy_bd == false) {
+		u16 td_status = in_be16(&ep->empty_td->status);
+
+		out_be32(&ep->empty_td->buf_ptr, DUMMY_BD_BUFFER);
+		/* get the next TD in the ring */
+		ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status);
+		ep->already_pushed_dummy_bd = true;
+	}
+}
+
+/* destroy an USB endpoint */
+void fhci_ep0_free(struct fhci_usb *usb)
+{
+	struct endpoint *ep;
+	int size;
+
+	ep = usb->ep0;
+	if (ep) {
+		if (ep->td_base)
+			cpm_muram_free(cpm_muram_offset(ep->td_base));
+
+		if (ep->conf_frame_Q) {
+			size = cq_howmany(ep->conf_frame_Q);
+			for (; size; size--) {
+				struct packet *pkt = cq_get(ep->conf_frame_Q);
+
+				kfree(pkt);
+			}
+			cq_delete(ep->conf_frame_Q);
+		}
+
+		if (ep->empty_frame_Q) {
+			size = cq_howmany(ep->empty_frame_Q);
+			for (; size; size--) {
+				struct packet *pkt = cq_get(ep->empty_frame_Q);
+
+				kfree(pkt);
+			}
+			cq_delete(ep->empty_frame_Q);
+		}
+
+		if (ep->dummy_packets_Q) {
+			size = cq_howmany(ep->dummy_packets_Q);
+			for (; size; size--) {
+				u8 *buff = cq_get(ep->dummy_packets_Q);
+
+				kfree(buff);
+			}
+			cq_delete(ep->dummy_packets_Q);
+		}
+
+		kfree(ep);
+		usb->ep0 = NULL;
+	}
+}
+
+/*
+ * create the endpoint structure
+ *
+ * arguments:
+ * usb		A pointer to the data structure of the USB
+ * data_mem	The data memory partition(BUS)
+ * ring_len	TD ring length
+ */
+u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
+			   u32 ring_len)
+{
+	struct endpoint *ep;
+	struct usb_td __iomem *td;
+	unsigned long ep_offset;
+	char *err_for = "enpoint PRAM";
+	int ep_mem_size;
+	u32 i;
+
+	/* we need at least 3 TDs in the ring */
+	if (!(ring_len > 2)) {
+		fhci_err(usb->fhci, "illegal TD ring length parameters\n");
+		return -EINVAL;
+	}
+
+	ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+	if (!ep)
+		return -ENOMEM;
+
+	ep_mem_size = ring_len * sizeof(*td) + sizeof(struct fhci_ep_pram);
+	ep_offset = cpm_muram_alloc(ep_mem_size, 32);
+	if (IS_ERR_VALUE(ep_offset))
+		goto err;
+	ep->td_base = cpm_muram_addr(ep_offset);
+
+	/* zero all queue pointers */
+	ep->conf_frame_Q = cq_new(ring_len + 2);
+	ep->empty_frame_Q = cq_new(ring_len + 2);
+	ep->dummy_packets_Q = cq_new(ring_len + 2);
+	if (!ep->conf_frame_Q || !ep->empty_frame_Q || !ep->dummy_packets_Q) {
+		err_for = "frame_queues";
+		goto err;
+	}
+
+	for (i = 0; i < (ring_len + 1); i++) {
+		struct packet *pkt;
+		u8 *buff;
+
+		pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
+		if (!pkt) {
+			err_for = "frame";
+			goto err;
+		}
+
+		buff = kmalloc(1028 * sizeof(*buff), GFP_KERNEL);
+		if (!buff) {
+			kfree(pkt);
+			err_for = "buffer";
+			goto err;
+		}
+		cq_put(ep->empty_frame_Q, pkt);
+		cq_put(ep->dummy_packets_Q, buff);
+	}
+
+	/* we put the endpoint parameter RAM right behind the TD ring */
+	ep->ep_pram_ptr = (void __iomem *)ep->td_base + sizeof(*td) * ring_len;
+
+	ep->conf_td = ep->td_base;
+	ep->empty_td = ep->td_base;
+
+	ep->already_pushed_dummy_bd = false;
+
+	/* initialize tds */
+	td = ep->td_base;
+	for (i = 0; i < ring_len; i++) {
+		out_be32(&td->buf_ptr, 0);
+		out_be16(&td->status, 0);
+		out_be16(&td->length, 0);
+		out_be16(&td->extra, 0);
+		td++;
+	}
+	td--;
+	out_be16(&td->status, TD_W); /* for last TD set Wrap bit */
+	out_be16(&td->length, 0);
+
+	/* endpoint structure has been created */
+	usb->ep0 = ep;
+
+	return 0;
+err:
+	fhci_ep0_free(usb);
+	kfree(ep);
+	fhci_err(usb->fhci, "no memory for the %s\n", err_for);
+	return -ENOMEM;
+}
+
+/*
+ * initialize the endpoint register according to the given parameters
+ *
+ * artuments:
+ * usb		A pointer to the data strucutre of the USB
+ * ep		A pointer to the endpoint structre
+ * data_mem	The data memory partition(BUS)
+ */
+void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep,
+			    enum fhci_mem_alloc data_mem)
+{
+	u8 rt;
+
+	/* set the endpoint registers according to the endpoint */
+	out_be16(&usb->fhci->regs->usb_ep[0],
+		 USB_TRANS_CTR | USB_EP_MF | USB_EP_RTE);
+	out_be16(&usb->fhci->pram->ep_ptr[0],
+		 cpm_muram_offset(ep->ep_pram_ptr));
+
+	rt = (BUS_MODE_BO_BE | BUS_MODE_GBL);
+#ifdef MULTI_DATA_BUS
+	if (data_mem == MEM_SECONDARY)
+		rt |= BUS_MODE_DTB;
+#endif
+	out_8(&ep->ep_pram_ptr->rx_func_code, rt);
+	out_8(&ep->ep_pram_ptr->tx_func_code, rt);
+	out_be16(&ep->ep_pram_ptr->rx_buff_len, 1028);
+	out_be16(&ep->ep_pram_ptr->rx_base, 0);
+	out_be16(&ep->ep_pram_ptr->tx_base, cpm_muram_offset(ep->td_base));
+	out_be16(&ep->ep_pram_ptr->rx_bd_ptr, 0);
+	out_be16(&ep->ep_pram_ptr->tx_bd_ptr, cpm_muram_offset(ep->td_base));
+	out_be32(&ep->ep_pram_ptr->tx_state, 0);
+}
+
+/*
+ * Collect the submitted frames and inform the application about them
+ * It is also prepearing the TDs for new frames. If the Tx interrupts
+ * are diabled, the application should call that routine to get
+ * confirmation about the submitted frames. Otherwise, the routine is
+ * called frome the interrupt service routine during the Tx interrupt.
+ * In that case the application is informed by calling the application
+ * specific 'fhci_transaction_confirm' routine
+ */
+static void fhci_td_transaction_confirm(struct fhci_usb *usb)
+{
+	struct endpoint *ep = usb->ep0;
+	struct packet *pkt;
+	struct usb_td __iomem *td;
+	u16 extra_data;
+	u16 td_status;
+	u16 td_length;
+	u32 buf;
+
+	/*
+	 * collect transmitted BDs from the chip. The routine clears all BDs
+	 * with R bit = 0 and the pointer to data buffer is not NULL, that is
+	 * BDs which point to the transmitted data buffer
+	 */
+	while (1) {
+		td = ep->conf_td;
+		td_status = in_be16(&td->status);
+		td_length = in_be16(&td->length);
+		buf = in_be32(&td->buf_ptr);
+		extra_data = in_be16(&td->extra);
+
+		/* check if the TD is empty */
+		if (!(!(td_status & TD_R) && ((td_status & ~TD_W) || buf)))
+			break;
+		/* check if it is a dummy buffer */
+		else if ((buf == DUMMY_BD_BUFFER) && !(td_status & ~TD_W))
+			break;
+
+		/* mark TD as empty */
+		clrbits16(&td->status, ~TD_W);
+		out_be16(&td->length, 0);
+		out_be32(&td->buf_ptr, 0);
+		out_be16(&td->extra, 0);
+		/* advance the TD pointer */
+		ep->conf_td = next_bd(ep->td_base, ep->conf_td, td_status);
+
+		/* check if it is a dummy buffer(type2) */
+		if ((buf == DUMMY2_BD_BUFFER) && !(td_status & ~TD_W))
+			continue;
+
+		pkt = cq_get(ep->conf_frame_Q);
+		if (!pkt)
+			fhci_err(usb->fhci, "no frame to confirm\n");
+
+		if (td_status & TD_ERRORS) {
+			if (td_status & TD_RXER) {
+				if (td_status & TD_CR)
+					pkt->status = USB_TD_RX_ER_CRC;
+				else if (td_status & TD_AB)
+					pkt->status = USB_TD_RX_ER_BITSTUFF;
+				else if (td_status & TD_OV)
+					pkt->status = USB_TD_RX_ER_OVERUN;
+				else if (td_status & TD_BOV)
+					pkt->status = USB_TD_RX_DATA_OVERUN;
+				else if (td_status & TD_NO)
+					pkt->status = USB_TD_RX_ER_NONOCT;
+				else
+					fhci_err(usb->fhci, "illegal error "
+						 "occured\n");
+			} else if (td_status & TD_NAK)
+				pkt->status = USB_TD_TX_ER_NAK;
+			else if (td_status & TD_TO)
+				pkt->status = USB_TD_TX_ER_TIMEOUT;
+			else if (td_status & TD_UN)
+				pkt->status = USB_TD_TX_ER_UNDERUN;
+			else if (td_status & TD_STAL)
+				pkt->status = USB_TD_TX_ER_STALL;
+			else
+				fhci_err(usb->fhci, "illegal error occured\n");
+		} else if ((extra_data & TD_TOK_IN) &&
+				pkt->len > td_length - CRC_SIZE) {
+			pkt->status = USB_TD_RX_DATA_UNDERUN;
+		}
+
+		if (extra_data & TD_TOK_IN)
+			pkt->len = td_length - CRC_SIZE;
+		else if (pkt->info & PKT_ZLP)
+			pkt->len = 0;
+		else
+			pkt->len = td_length;
+
+		fhci_transaction_confirm(usb, pkt);
+	}
+}
+
+/*
+ * Submitting a data frame to a specified endpoint of a USB device
+ * The frame is put in the driver's transmit queue for this endpoint
+ *
+ * Arguments:
+ * usb          A pointer to the USB structure
+ * pkt          A pointer to the user frame structure
+ * trans_type   Transaction tyep - IN,OUT or SETUP
+ * dest_addr    Device address - 0~127
+ * dest_ep      Endpoint number of the device - 0~16
+ * trans_mode   Pipe type - ISO,Interrupt,bulk or control
+ * dest_speed   USB speed - Low speed or FULL speed
+ * data_toggle  Data sequence toggle - 0 or 1
+ */
+u32 fhci_host_transaction(struct fhci_usb *usb,
+			  struct packet *pkt,
+			  enum fhci_ta_type trans_type,
+			  u8 dest_addr,
+			  u8 dest_ep,
+			  enum fhci_tf_mode trans_mode,
+			  enum fhci_speed dest_speed, u8 data_toggle)
+{
+	struct endpoint *ep = usb->ep0;
+	struct usb_td __iomem *td;
+	u16 extra_data;
+	u16 td_status;
+
+	fhci_usb_disable_interrupt(usb);
+	/* start from the next BD that should be filled */
+	td = ep->empty_td;
+	td_status = in_be16(&td->status);
+
+	if (td_status & TD_R && in_be16(&td->length)) {
+		/* if the TD is not free */
+		fhci_usb_enable_interrupt(usb);
+		return -1;
+	}
+
+	/* get the next TD in the ring */
+	ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status);
+	fhci_usb_enable_interrupt(usb);
+	pkt->priv_data = td;
+	out_be32(&td->buf_ptr, virt_to_phys(pkt->data));
+	/* sets up transaction parameters - addr,endp,dir,and type */
+	extra_data = (dest_ep << TD_ENDP_SHIFT) | dest_addr;
+	switch (trans_type) {
+	case FHCI_TA_IN:
+		extra_data |= TD_TOK_IN;
+		break;
+	case FHCI_TA_OUT:
+		extra_data |= TD_TOK_OUT;
+		break;
+	case FHCI_TA_SETUP:
+		extra_data |= TD_TOK_SETUP;
+		break;
+	}
+	if (trans_mode == FHCI_TF_ISO)
+		extra_data |= TD_ISO;
+	out_be16(&td->extra, extra_data);
+
+	/* sets up the buffer descriptor */
+	td_status = ((td_status & TD_W) | TD_R | TD_L | TD_I | TD_CNF);
+	if (!(pkt->info & PKT_NO_CRC))
+		td_status |= TD_TC;
+
+	switch (trans_type) {
+	case FHCI_TA_IN:
+		if (data_toggle)
+			pkt->info |= PKT_PID_DATA1;
+		else
+			pkt->info |= PKT_PID_DATA0;
+		break;
+	default:
+		if (data_toggle) {
+			td_status |= TD_PID_DATA1;
+			pkt->info |= PKT_PID_DATA1;
+		} else {
+			td_status |= TD_PID_DATA0;
+			pkt->info |= PKT_PID_DATA0;
+		}
+		break;
+	}
+
+	if ((dest_speed == FHCI_LOW_SPEED) &&
+	    (usb->port_status == FHCI_PORT_FULL))
+		td_status |= TD_LSP;
+
+	out_be16(&td->status, td_status);
+
+	/* set up buffer length */
+	if (trans_type == FHCI_TA_IN)
+		out_be16(&td->length, pkt->len + CRC_SIZE);
+	else
+		out_be16(&td->length, pkt->len);
+
+	/* put the frame to the confirmation queue */
+	cq_put(ep->conf_frame_Q, pkt);
+
+	if (cq_howmany(ep->conf_frame_Q) == 1)
+		out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO);
+
+	return 0;
+}
+
+/* Reset the Tx BD ring */
+void fhci_flush_bds(struct fhci_usb *usb)
+{
+	u16 extra_data;
+	u16 td_status;
+	u32 buf;
+	struct usb_td __iomem *td;
+	struct endpoint *ep = usb->ep0;
+
+	td = ep->td_base;
+	while (1) {
+		td_status = in_be16(&td->status);
+		buf = in_be32(&td->buf_ptr);
+		extra_data = in_be16(&td->extra);
+
+		/* if the TD is not empty - we'll confirm it as Timeout */
+		if (td_status & TD_R)
+			out_be16(&td->status, (td_status & ~TD_R) | TD_TO);
+		/* if this TD is dummy - let's skip this TD */
+		else if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER)
+			out_be32(&td->buf_ptr, DUMMY2_BD_BUFFER);
+		/* if this is the last TD - break */
+		if (td_status & TD_W)
+			break;
+
+		td++;
+	}
+
+	fhci_td_transaction_confirm(usb);
+
+	td = ep->td_base;
+	do {
+		out_be16(&td->status, 0);
+		out_be16(&td->length, 0);
+		out_be32(&td->buf_ptr, 0);
+		out_be16(&td->extra, 0);
+		td++;
+	} while (!(in_be16(&td->status) & TD_W));
+	out_be16(&td->status, TD_W); /* for last TD set Wrap bit */
+	out_be16(&td->length, 0);
+	out_be32(&td->buf_ptr, 0);
+	out_be16(&td->extra, 0);
+
+	out_be16(&ep->ep_pram_ptr->tx_bd_ptr,
+		 in_be16(&ep->ep_pram_ptr->tx_base));
+	out_be32(&ep->ep_pram_ptr->tx_state, 0);
+	out_be16(&ep->ep_pram_ptr->tx_cnt, 0);
+	ep->empty_td = ep->td_base;
+	ep->conf_td = ep->td_base;
+}
+
+/*
+ * Flush all transmitted packets from TDs in the actual frame.
+ * This routine is called when something wrong with the controller and
+ * we want to get rid of the actual frame and start again next frame
+ */
+void fhci_flush_actual_frame(struct fhci_usb *usb)
+{
+	u8 mode;
+	u16 tb_ptr;
+	u16 extra_data;
+	u16 td_status;
+	u32 buf_ptr;
+	struct usb_td __iomem *td;
+	struct endpoint *ep = usb->ep0;
+
+	/* disable the USB controller */
+	mode = in_8(&usb->fhci->regs->usb_mod);
+	out_8(&usb->fhci->regs->usb_mod, mode & ~USB_MODE_EN);
+
+	tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr);
+	td = cpm_muram_addr(tb_ptr);
+	td_status = in_be16(&td->status);
+	buf_ptr = in_be32(&td->buf_ptr);
+	extra_data = in_be16(&td->extra);
+	do {
+		if (td_status & TD_R) {
+			out_be16(&td->status, (td_status & ~TD_R) | TD_TO);
+		} else {
+			out_be32(&td->buf_ptr, 0);
+			ep->already_pushed_dummy_bd = false;
+			break;
+		}
+
+		/* advance the TD pointer */
+		td = next_bd(ep->td_base, td, td_status);
+		td_status = in_be16(&td->status);
+		buf_ptr = in_be32(&td->buf_ptr);
+		extra_data = in_be16(&td->extra);
+	} while ((td_status & TD_R) || buf_ptr);
+
+	fhci_td_transaction_confirm(usb);
+
+	out_be16(&ep->ep_pram_ptr->tx_bd_ptr,
+		 in_be16(&ep->ep_pram_ptr->tx_base));
+	out_be32(&ep->ep_pram_ptr->tx_state, 0);
+	out_be16(&ep->ep_pram_ptr->tx_cnt, 0);
+	ep->empty_td = ep->td_base;
+	ep->conf_td = ep->td_base;
+
+	usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION;
+
+	/* reset the event register */
+	out_be16(&usb->fhci->regs->usb_event, 0xffff);
+	/* enable the USB controller */
+	out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN);
+}
+
+/* handles Tx confirm and Tx error interrupt */
+void fhci_tx_conf_interrupt(struct fhci_usb *usb)
+{
+	fhci_td_transaction_confirm(usb);
+
+	/*
+	 * Schedule another transaction to this frame only if we have
+	 * already confirmed all transaction in the frame.
+	 */
+	if (((fhci_get_sof_timer_count(usb) < usb->max_frame_usage) ||
+	     (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)) &&
+	    (list_empty(&usb->actual_frame->tds_list)))
+		fhci_schedule_transactions(usb);
+}
+
+void fhci_host_transmit_actual_frame(struct fhci_usb *usb)
+{
+	u16 tb_ptr;
+	u16 td_status;
+	struct usb_td __iomem *td;
+	struct endpoint *ep = usb->ep0;
+
+	tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr);
+	td = cpm_muram_addr(tb_ptr);
+
+	if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) {
+		struct usb_td __iomem *old_td = td;
+
+		ep->already_pushed_dummy_bd = false;
+		td_status = in_be16(&td->status);
+		/* gets the next TD in the ring */
+		td = next_bd(ep->td_base, td, td_status);
+		tb_ptr = cpm_muram_offset(td);
+		out_be16(&ep->ep_pram_ptr->tx_bd_ptr, tb_ptr);
+
+		/* start transmit only if we have something in the TDs */
+		if (in_be16(&td->status) & TD_R)
+			out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO);
+
+		if (in_be32(&ep->conf_td->buf_ptr) == DUMMY_BD_BUFFER) {
+			out_be32(&old_td->buf_ptr, 0);
+			ep->conf_td = next_bd(ep->td_base, ep->conf_td,
+					      td_status);
+		} else {
+			out_be32(&old_td->buf_ptr, DUMMY2_BD_BUFFER);
+		}
+	}
+}
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
new file mode 100644
index 00000000000..7116284ed21
--- /dev/null
+++ b/drivers/usb/host/fhci.h
@@ -0,0 +1,607 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __FHCI_H
+#define __FHCI_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/kfifo.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <asm/qe.h>
+#include "../core/hcd.h"
+
+#define USB_CLOCK	48000000
+
+#define FHCI_PRAM_SIZE 0x100
+
+#define MAX_EDS		32
+#define MAX_TDS		32
+
+
+/* CRC16 field size */
+#define CRC_SIZE 2
+
+/* USB protocol overhead for each frame transmitted from the host */
+#define PROTOCOL_OVERHEAD 7
+
+/* Packet structure, info field */
+#define PKT_PID_DATA0		0x80000000 /* PID - Data toggle zero */
+#define PKT_PID_DATA1		0x40000000 /* PID - Data toggle one  */
+#define PKT_PID_SETUP		0x20000000 /* PID - Setup bit */
+#define PKT_SETUP_STATUS	0x10000000 /* Setup status bit */
+#define PKT_SETADDR_STATUS	0x08000000 /* Set address status bit */
+#define PKT_SET_HOST_LAST	0x04000000 /* Last data packet */
+#define PKT_HOST_DATA		0x02000000 /* Data packet */
+#define PKT_FIRST_IN_FRAME	0x01000000 /* First packet in the frame */
+#define PKT_TOKEN_FRAME		0x00800000 /* Token packet */
+#define PKT_ZLP			0x00400000 /* Zero length packet */
+#define PKT_IN_TOKEN_FRAME	0x00200000 /* IN token packet */
+#define PKT_OUT_TOKEN_FRAME	0x00100000 /* OUT token packet */
+#define PKT_SETUP_TOKEN_FRAME	0x00080000 /* SETUP token packet */
+#define PKT_STALL_FRAME		0x00040000 /* STALL packet */
+#define PKT_NACK_FRAME		0x00020000 /* NACK packet */
+#define PKT_NO_PID		0x00010000 /* No PID */
+#define PKT_NO_CRC		0x00008000 /* don't append CRC */
+#define PKT_HOST_COMMAND	0x00004000 /* Host command packet */
+#define PKT_DUMMY_PACKET	0x00002000 /* Dummy packet, used for mmm */
+#define PKT_LOW_SPEED_PACKET	0x00001000 /* Low-Speed packet */
+
+#define TRANS_OK		(0)
+#define TRANS_INPROGRESS	(-1)
+#define TRANS_DISCARD		(-2)
+#define TRANS_FAIL		(-3)
+
+#define PS_INT		0
+#define PS_DISCONNECTED	1
+#define PS_CONNECTED	2
+#define PS_READY	3
+#define PS_MISSING	4
+
+/* Transfer Descriptor status field */
+#define USB_TD_OK		0x00000000 /* TD transmited or received ok */
+#define USB_TD_INPROGRESS	0x80000000 /* TD is being transmitted */
+#define USB_TD_RX_ER_NONOCT	0x40000000 /* Tx Non Octet Aligned Packet */
+#define USB_TD_RX_ER_BITSTUFF	0x20000000 /* Frame Aborted-Received pkt */
+#define USB_TD_RX_ER_CRC	0x10000000 /* CRC error */
+#define USB_TD_RX_ER_OVERUN	0x08000000 /* Over - run occured */
+#define USB_TD_RX_ER_PID	0x04000000 /* wrong PID received */
+#define USB_TD_RX_DATA_UNDERUN	0x02000000 /* shorter than expected */
+#define USB_TD_RX_DATA_OVERUN	0x01000000 /* longer than expected */
+#define USB_TD_TX_ER_NAK	0x00800000 /* NAK handshake */
+#define USB_TD_TX_ER_STALL	0x00400000 /* STALL handshake */
+#define USB_TD_TX_ER_TIMEOUT	0x00200000 /* transmit time out */
+#define USB_TD_TX_ER_UNDERUN	0x00100000 /* transmit underrun */
+
+#define USB_TD_ERROR (USB_TD_RX_ER_NONOCT | USB_TD_RX_ER_BITSTUFF | \
+		USB_TD_RX_ER_CRC | USB_TD_RX_ER_OVERUN | USB_TD_RX_ER_PID | \
+		USB_TD_RX_DATA_UNDERUN | USB_TD_RX_DATA_OVERUN | \
+		USB_TD_TX_ER_NAK | USB_TD_TX_ER_STALL | \
+		USB_TD_TX_ER_TIMEOUT | USB_TD_TX_ER_UNDERUN)
+
+/* Transfer Descriptor toggle field */
+#define USB_TD_TOGGLE_DATA0	0
+#define USB_TD_TOGGLE_DATA1	1
+#define USB_TD_TOGGLE_CARRY	2
+
+/* #define MULTI_DATA_BUS */
+
+/* Bus mode register RBMR/TBMR */
+#define BUS_MODE_GBL	0x20	/* Global snooping */
+#define BUS_MODE_BO	0x18	/* Byte ordering */
+#define BUS_MODE_BO_BE	0x10	/* Byte ordering - Big-endian */
+#define BUS_MODE_DTB	0x02	/* Data bus */
+
+/* FHCI QE USB Register Description */
+
+/* USB Mode Register bit define */
+#define USB_MODE_EN		0x01
+#define USB_MODE_HOST		0x02
+#define USB_MODE_TEST		0x04
+#define USB_MODE_SFTE		0x08
+#define USB_MODE_RESUME		0x40
+#define USB_MODE_LSS		0x80
+
+/* USB Slave Address Register Mask */
+#define USB_SLVADDR_MASK	0x7F
+
+/* USB Endpoint register define */
+#define USB_EPNUM_MASK		0xF000
+#define USB_EPNUM_SHIFT		12
+
+#define USB_TRANS_MODE_SHIFT	8
+#define USB_TRANS_CTR		0x0000
+#define USB_TRANS_INT		0x0100
+#define USB_TRANS_BULK		0x0200
+#define USB_TRANS_ISO		0x0300
+
+#define USB_EP_MF		0x0020
+#define USB_EP_RTE		0x0010
+
+#define USB_THS_SHIFT		2
+#define USB_THS_MASK		0x000c
+#define USB_THS_NORMAL		0x0
+#define USB_THS_IGNORE_IN	0x0004
+#define USB_THS_NACK		0x0008
+#define USB_THS_STALL		0x000c
+
+#define USB_RHS_SHIFT   	0
+#define USB_RHS_MASK		0x0003
+#define USB_RHS_NORMAL  	0x0
+#define USB_RHS_IGNORE_OUT	0x0001
+#define USB_RHS_NACK		0x0002
+#define USB_RHS_STALL		0x0003
+
+#define USB_RTHS_MASK		0x000f
+
+/* USB Command Register define */
+#define USB_CMD_STR_FIFO	0x80
+#define USB_CMD_FLUSH_FIFO	0x40
+#define USB_CMD_ISFT		0x20
+#define USB_CMD_DSFT		0x10
+#define USB_CMD_EP_MASK		0x03
+
+/* USB Event and Mask Register define */
+#define USB_E_MSF_MASK		0x0800
+#define USB_E_SFT_MASK		0x0400
+#define USB_E_RESET_MASK	0x0200
+#define USB_E_IDLE_MASK		0x0100
+#define USB_E_TXE4_MASK		0x0080
+#define USB_E_TXE3_MASK		0x0040
+#define USB_E_TXE2_MASK		0x0020
+#define USB_E_TXE1_MASK		0x0010
+#define USB_E_SOF_MASK		0x0008
+#define USB_E_BSY_MASK		0x0004
+#define USB_E_TXB_MASK		0x0002
+#define USB_E_RXB_MASK		0x0001
+
+/* Freescale USB Host controller registers */
+struct fhci_regs {
+	u8 usb_mod;		/* mode register */
+	u8 usb_addr;		/* address register */
+	u8 usb_comm;		/* command register */
+	u8 reserved1[1];
+	__be16 usb_ep[4];	/* endpoint register */
+	u8 reserved2[4];
+	__be16 usb_event;	/* event register */
+	u8 reserved3[2];
+	__be16 usb_mask;	/* mask register */
+	u8 reserved4[1];
+	u8 usb_status;		/* status register */
+	__be16 usb_sof_tmr;	/* Start Of Frame timer */
+	u8 reserved5[2];
+	__be16 usb_frame_num;	/* frame number register */
+	u8 reserved6[1];
+};
+
+/* Freescale USB HOST */
+struct fhci_pram {
+	__be16 ep_ptr[4];	/* Endpoint porter reg */
+	__be32 rx_state;	/* Rx internal state */
+	__be32 rx_ptr;		/* Rx internal data pointer */
+	__be16 frame_num;	/* Frame number */
+	__be16 rx_cnt;		/* Rx byte count */
+	__be32 rx_temp;		/* Rx temp */
+	__be32 rx_data_temp;	/* Rx data temp */
+	__be16 rx_u_ptr;	/* Rx microcode return address temp */
+	u8 reserved1[2];	/* reserved area */
+	__be32 sof_tbl;		/* SOF lookup table pointer */
+	u8 sof_u_crc_temp;	/* SOF micorcode CRC5 temp reg */
+	u8 reserved2[0xdb];
+};
+
+/* Freescale USB Endpoint*/
+struct fhci_ep_pram {
+	__be16 rx_base;		/* Rx BD base address */
+	__be16 tx_base;		/* Tx BD base address */
+	u8 rx_func_code;	/* Rx function code */
+	u8 tx_func_code;	/* Tx function code */
+	__be16 rx_buff_len;	/* Rx buffer length */
+	__be16 rx_bd_ptr;	/* Rx BD pointer */
+	__be16 tx_bd_ptr;	/* Tx BD pointer */
+	__be32 tx_state;	/* Tx internal state */
+	__be32 tx_ptr;		/* Tx internal data pointer */
+	__be16 tx_crc;		/* temp transmit CRC */
+	__be16 tx_cnt;		/* Tx byte count */
+	__be32 tx_temp;		/* Tx temp */
+	__be16 tx_u_ptr;	/* Tx microcode return address temp */
+	__be16 reserved;
+};
+
+struct fhci_controller_list {
+	struct list_head ctrl_list;	/* control endpoints */
+	struct list_head bulk_list;	/* bulk endpoints */
+	struct list_head iso_list;	/* isochronous endpoints */
+	struct list_head intr_list;	/* interruput endpoints */
+	struct list_head done_list;	/* done transfers */
+};
+
+struct virtual_root_hub {
+	int dev_num;	/* USB address of the root hub */
+	u32 feature;	/* indicates what feature has been set */
+	struct usb_hub_status hub;
+	struct usb_port_status port;
+};
+
+enum fhci_gpios {
+	GPIO_USBOE = 0,
+	GPIO_USBTP,
+	GPIO_USBTN,
+	GPIO_USBRP,
+	GPIO_USBRN,
+	/* these are optional */
+	GPIO_SPEED,
+	GPIO_POWER,
+	NUM_GPIOS,
+};
+
+enum fhci_pins {
+	PIN_USBOE = 0,
+	PIN_USBTP,
+	PIN_USBTN,
+	NUM_PINS,
+};
+
+struct fhci_hcd {
+	enum qe_clock fullspeed_clk;
+	enum qe_clock lowspeed_clk;
+	struct qe_pin *pins[NUM_PINS];
+	int gpios[NUM_GPIOS];
+	bool alow_gpios[NUM_GPIOS];
+
+	struct fhci_regs __iomem *regs;	/* I/O memory used to communicate */
+	struct fhci_pram __iomem *pram;	/* Parameter RAM */
+	struct gtm_timer *timer;
+
+	spinlock_t lock;
+	struct fhci_usb *usb_lld; /* Low-level driver */
+	struct virtual_root_hub *vroot_hub; /* the virtual root hub */
+	int active_urbs;
+	struct fhci_controller_list *hc_list;
+	struct tasklet_struct *process_done_task; /* tasklet for done list */
+
+	struct list_head empty_eds;
+	struct list_head empty_tds;
+
+#ifdef CONFIG_FHCI_DEBUG
+	int usb_irq_stat[13];
+	struct dentry *dfs_root;
+	struct dentry *dfs_regs;
+	struct dentry *dfs_irq_stat;
+#endif
+};
+
+#define USB_FRAME_USAGE 90
+#define FRAME_TIME_USAGE (USB_FRAME_USAGE*10)	/* frame time usage */
+#define SW_FIX_TIME_BETWEEN_TRANSACTION 150	/* SW */
+#define MAX_BYTES_PER_FRAME (USB_FRAME_USAGE*15)
+#define MAX_PERIODIC_FRAME_USAGE 90
+
+/* transaction type */
+enum fhci_ta_type {
+	FHCI_TA_IN = 0,	/* input transaction */
+	FHCI_TA_OUT,	/* output transaction */
+	FHCI_TA_SETUP,	/* setup transaction */
+};
+
+/* transfer mode */
+enum fhci_tf_mode {
+	FHCI_TF_CTRL = 0,
+	FHCI_TF_ISO,
+	FHCI_TF_BULK,
+	FHCI_TF_INTR,
+};
+
+enum fhci_speed {
+	FHCI_FULL_SPEED,
+	FHCI_LOW_SPEED,
+};
+
+/* endpoint state */
+enum fhci_ed_state {
+	FHCI_ED_NEW = 0, /* pipe is new */
+	FHCI_ED_OPER,    /* pipe is operating */
+	FHCI_ED_URB_DEL, /* pipe is in hold because urb is being deleted */
+	FHCI_ED_SKIP,    /* skip this pipe */
+	FHCI_ED_HALTED,  /* pipe is halted */
+};
+
+enum fhci_port_status {
+	FHCI_PORT_POWER_OFF = 0,
+	FHCI_PORT_DISABLED,
+	FHCI_PORT_DISCONNECTING,
+	FHCI_PORT_WAITING,	/* waiting for connection */
+	FHCI_PORT_FULL,		/* full speed connected */
+	FHCI_PORT_LOW,		/* low speed connected */
+};
+
+enum fhci_mem_alloc {
+	MEM_CACHABLE_SYS = 0x00000001,	/* primary DDR,cachable */
+	MEM_NOCACHE_SYS = 0x00000004,	/* primary DDR,non-cachable */
+	MEM_SECONDARY = 0x00000002,	/* either secondary DDR or SDRAM */
+	MEM_PRAM = 0x00000008,		/* multi-user RAM identifier */
+};
+
+/* USB default parameters*/
+#define DEFAULT_RING_LEN	8
+#define DEFAULT_DATA_MEM	MEM_CACHABLE_SYS
+
+struct ed {
+	u8 dev_addr;		/* device address */
+	u8 ep_addr;		/* endpoint address */
+	enum fhci_tf_mode mode;	/* USB transfer mode */
+	enum fhci_speed speed;
+	unsigned int max_pkt_size;
+	enum fhci_ed_state state;
+	struct list_head td_list; /* a list of all queued TD to this pipe */
+	struct list_head node;
+
+	/* read only parameters, should be cleared upon initialization */
+	u8 toggle_carry;	/* toggle carry from the last TD submitted */
+	u32 last_iso;		/* time stamp of last queued ISO transfer */
+	struct td *td_head;	/* a pointer to the current TD handled */
+};
+
+struct td {
+	void *data;		 /* a pointer to the data buffer */
+	unsigned int len;	 /* length of the data to be submitted */
+	unsigned int actual_len; /* actual bytes transfered on this td */
+	enum fhci_ta_type type;	 /* transaction type */
+	u8 toggle;		 /* toggle for next trans. within this TD */
+	u16 iso_index;		 /* ISO transaction index */
+	u16 start_frame;	 /* start frame time stamp */
+	u16 interval;		 /* interval between trans. (for ISO/Intr) */
+	u32 status;		 /* status of the TD */
+	struct ed *ed;		 /* a handle to the corresponding ED */
+	struct urb *urb;	 /* a handle to the corresponding URB */
+	bool ioc;		 /* Inform On Completion */
+	struct list_head node;
+
+	/* read only parameters should be cleared upon initialization */
+	struct packet *pkt;
+	int nak_cnt;
+	int error_cnt;
+	struct list_head frame_lh;
+};
+
+struct packet {
+	u8 *data;	/* packet data */
+	u32 len;	/* packet length */
+	u32 status;	/* status of the packet - equivalent to the status
+			 * field for the corresponding structure td */
+	u32 info;	/* packet information */
+	void __iomem *priv_data; /* private data of the driver (TDs or BDs) */
+};
+
+/* struct for each URB */
+#define URB_INPROGRESS	0
+#define URB_DEL		1
+
+/* URB states (state field) */
+#define US_BULK		0
+#define US_BULK0	1
+
+/* three setup states */
+#define US_CTRL_SETUP	2
+#define US_CTRL_DATA	1
+#define US_CTRL_ACK	0
+
+#define EP_ZERO	0
+
+struct urb_priv {
+	int num_of_tds;
+	int tds_cnt;
+	int state;
+
+	struct td **tds;
+	struct ed *ed;
+	struct timer_list time_out;
+};
+
+struct endpoint {
+	/* Pointer to ep parameter RAM */
+	struct fhci_ep_pram __iomem *ep_pram_ptr;
+
+	/* Host transactions */
+	struct usb_td __iomem *td_base; /* first TD in the ring */
+	struct usb_td __iomem *conf_td; /* next TD for confirm after transac */
+	struct usb_td __iomem *empty_td;/* next TD for new transaction req. */
+	struct kfifo *empty_frame_Q;  /* Empty frames list to use */
+	struct kfifo *conf_frame_Q;   /* frames passed to TDs,waiting for tx */
+	struct kfifo *dummy_packets_Q;/* dummy packets for the CRC overun */
+
+	bool already_pushed_dummy_bd;
+};
+
+/* struct for each 1mSec frame time */
+#define FRAME_IS_TRANSMITTED		0x00
+#define FRAME_TIMER_END_TRANSMISSION	0x01
+#define FRAME_DATA_END_TRANSMISSION	0x02
+#define FRAME_END_TRANSMISSION		0x03
+#define FRAME_IS_PREPARED		0x04
+
+struct fhci_time_frame {
+	u16 frame_num;	 /* frame number */
+	u16 total_bytes; /* total bytes submitted within this frame */
+	u8 frame_status; /* flag that indicates to stop fill this frame */
+	struct list_head tds_list; /* all tds of this frame */
+};
+
+/* internal driver structure*/
+struct fhci_usb {
+	u16 saved_msk;		 /* saving of the USB mask register */
+	struct endpoint *ep0;	 /* pointer for endpoint0 structure */
+	int intr_nesting_cnt;	 /* interrupt nesting counter */
+	u16 max_frame_usage;	 /* max frame time usage,in micro-sec */
+	u16 max_bytes_per_frame; /* max byte can be tx in one time frame */
+	u32 sw_transaction_time; /* sw complete trans time,in micro-sec */
+	struct fhci_time_frame *actual_frame;
+	struct fhci_controller_list *hc_list;	/* main structure for hc */
+	struct virtual_root_hub *vroot_hub;
+	enum fhci_port_status port_status;	/* v_rh port status */
+
+	u32 (*transfer_confirm)(struct fhci_hcd *fhci);
+
+	struct fhci_hcd *fhci;
+};
+
+/*
+ * Various helpers and prototypes below.
+ */
+
+static inline u16 get_frame_num(struct fhci_hcd *fhci)
+{
+	return in_be16(&fhci->pram->frame_num) & 0x07ff;
+}
+
+#define fhci_dbg(fhci, fmt, args...) \
+		dev_dbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_vdbg(fhci, fmt, args...) \
+		dev_vdbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_err(fhci, fmt, args...) \
+		dev_err(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_info(fhci, fmt, args...) \
+		dev_info(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_warn(fhci, fmt, args...) \
+		dev_warn(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+
+static inline struct fhci_hcd *hcd_to_fhci(struct usb_hcd *hcd)
+{
+	return (struct fhci_hcd *)hcd->hcd_priv;
+}
+
+static inline struct usb_hcd *fhci_to_hcd(struct fhci_hcd *fhci)
+{
+	return container_of((void *)fhci, struct usb_hcd, hcd_priv);
+}
+
+/* fifo of pointers */
+static inline struct kfifo *cq_new(int size)
+{
+	return kfifo_alloc(size * sizeof(void *), GFP_KERNEL, NULL);
+}
+
+static inline void cq_delete(struct kfifo *kfifo)
+{
+	kfifo_free(kfifo);
+}
+
+static inline unsigned int cq_howmany(struct kfifo *kfifo)
+{
+	return __kfifo_len(kfifo) / sizeof(void *);
+}
+
+static inline int cq_put(struct kfifo *kfifo, void *p)
+{
+	return __kfifo_put(kfifo, (void *)&p, sizeof(p));
+}
+
+static inline void *cq_get(struct kfifo *kfifo)
+{
+	void *p = NULL;
+
+	__kfifo_get(kfifo, (void *)&p, sizeof(p));
+	return p;
+}
+
+/* fhci-hcd.c */
+void fhci_start_sof_timer(struct fhci_hcd *fhci);
+void fhci_stop_sof_timer(struct fhci_hcd *fhci);
+u16 fhci_get_sof_timer_count(struct fhci_usb *usb);
+void fhci_usb_enable_interrupt(struct fhci_usb *usb);
+void fhci_usb_disable_interrupt(struct fhci_usb *usb);
+int fhci_ioports_check_bus_state(struct fhci_hcd *fhci);
+
+/* fhci-mem.c */
+void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td);
+void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed);
+struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci);
+struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb,
+			struct urb_priv *urb_priv, struct ed *ed, u16 index,
+			enum fhci_ta_type type, int toggle, u8 *data, u32 len,
+			u16 interval, u16 start_frame, bool ioc);
+void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number);
+
+/* fhci-hub.c */
+void fhci_config_transceiver(struct fhci_hcd *fhci,
+			enum fhci_port_status status);
+void fhci_port_disable(struct fhci_hcd *fhci);
+void fhci_port_enable(void *lld);
+void fhci_io_port_generate_reset(struct fhci_hcd *fhci);
+void fhci_port_reset(void *lld);
+int fhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+		     u16 wIndex, char *buf, u16 wLength);
+
+/* fhci-tds.c */
+void fhci_flush_bds(struct fhci_usb *usb);
+void fhci_flush_actual_frame(struct fhci_usb *usb);
+u32 fhci_host_transaction(struct fhci_usb *usb, struct packet *pkt,
+			  enum fhci_ta_type trans_type, u8 dest_addr,
+			  u8 dest_ep, enum fhci_tf_mode trans_mode,
+			  enum fhci_speed dest_speed, u8 data_toggle);
+void fhci_host_transmit_actual_frame(struct fhci_usb *usb);
+void fhci_tx_conf_interrupt(struct fhci_usb *usb);
+void fhci_push_dummy_bd(struct endpoint *ep);
+u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
+		   u32 ring_len);
+void fhci_init_ep_registers(struct fhci_usb *usb,
+			    struct endpoint *ep,
+			    enum fhci_mem_alloc data_mem);
+void fhci_ep0_free(struct fhci_usb *usb);
+
+/* fhci-sched.c */
+extern struct tasklet_struct fhci_tasklet;
+void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt);
+void fhci_flush_all_transmissions(struct fhci_usb *usb);
+void fhci_schedule_transactions(struct fhci_usb *usb);
+void fhci_device_connected_interrupt(struct fhci_hcd *fhci);
+void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci);
+void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb);
+u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci);
+irqreturn_t fhci_irq(struct usb_hcd *hcd);
+irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd);
+
+/* fhci-q.h */
+void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb);
+struct td *fhci_remove_td_from_ed(struct ed *ed);
+struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame);
+void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed);
+struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame);
+void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td);
+struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list);
+void fhci_done_td(struct urb *urb, struct td *td);
+void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed);
+
+#ifdef CONFIG_FHCI_DEBUG
+
+void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er);
+void fhci_dfs_destroy(struct fhci_hcd *fhci);
+void fhci_dfs_create(struct fhci_hcd *fhci);
+
+#else
+
+static inline void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) {}
+static inline void fhci_dfs_destroy(struct fhci_hcd *fhci) {}
+static inline void fhci_dfs_create(struct fhci_hcd *fhci) {}
+
+#endif /* CONFIG_FHCI_DEBUG */
+
+#endif /* __FHCI_H */
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index fb3055f084b..7cf74f8c2db 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -28,8 +28,6 @@
 #include <linux/signal.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
-
 static struct clk *usb_host_clock;
 
 static void ep93xx_start_hc(struct device *dev)
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 65a9609f4ad..5cf5f1eca4f 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -593,12 +593,10 @@ static int ohci_run (struct ohci_hcd *ohci)
 	 * to be checked in case boot firmware (BIOS/SMM/...) has set up
 	 * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM).
 	 * If the bus glue detected wakeup capability then it should
-	 * already be enabled.  Either way, if wakeup should be enabled
-	 * but isn't, we'll enable it now.
+	 * already be enabled; if so we'll just enable it again.
 	 */
-	if ((ohci->hc_control & OHCI_CTRL_RWC) != 0
-			&& !device_can_wakeup(hcd->self.controller))
-		device_init_wakeup(hcd->self.controller, 1);
+	if ((ohci->hc_control & OHCI_CTRL_RWC) != 0)
+		device_set_wakeup_capable(hcd->self.controller, 1);
 
 	switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 	case OHCI_USB_OPER:
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 4bbddb73abd..f3aaba35e91 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -315,14 +315,14 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver,
 		return -ENODEV;
 	}
 
-	usb_host_ck = clk_get(0, "usb_hhc_ck");
+	usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck");
 	if (IS_ERR(usb_host_ck))
 		return PTR_ERR(usb_host_ck);
 
 	if (!cpu_is_omap15xx())
-		usb_dc_ck = clk_get(0, "usb_dc_ck");
+		usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck");
 	else
-		usb_dc_ck = clk_get(0, "lb_ck");
+		usb_dc_ck = clk_get(&pdev->dev, "lb_ck");
 
 	if (IS_ERR(usb_dc_ck)) {
 		clk_put(usb_host_ck);
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 8b28ae7865b..5d625c3fd42 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver = {
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.suspend_late =	usb_hcd_pci_suspend_late,
 	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 4e221060f58..944f7e0ca4d 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver = {
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.suspend_late =	usb_hcd_pci_suspend_late,
 	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif	/* PM */
diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c
index 577c0d29849..2291c5f5af5 100644
--- a/drivers/usb/host/whci/asl.c
+++ b/drivers/usb/host/whci/asl.c
@@ -170,12 +170,17 @@ void asl_stop(struct whc *whc)
 void asl_update(struct whc *whc, uint32_t wusbcmd)
 {
 	struct wusbhc *wusbhc = &whc->wusbhc;
+	long t;
 
 	mutex_lock(&wusbhc->mutex);
 	if (wusbhc->active) {
 		whc_write_wusbcmd(whc, wusbcmd, wusbcmd);
-		wait_event(whc->async_list_wq,
-			   (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0);
+		t = wait_event_timeout(
+			whc->async_list_wq,
+			(le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0,
+			msecs_to_jiffies(1000));
+		if (t == 0)
+			whc_hw_error(whc, "ASL update timeout");
 	}
 	mutex_unlock(&wusbhc->mutex);
 }
diff --git a/drivers/usb/host/whci/hw.c b/drivers/usb/host/whci/hw.c
index d498e720321..6afa2e37916 100644
--- a/drivers/usb/host/whci/hw.c
+++ b/drivers/usb/host/whci/hw.c
@@ -87,3 +87,18 @@ out:
 
 	return ret;
 }
+
+/**
+ * whc_hw_error - recover from a hardware error
+ * @whc:    the WHCI HC that broke.
+ * @reason: a description of the failure.
+ *
+ * Recover from broken hardware with a full reset.
+ */
+void whc_hw_error(struct whc *whc, const char *reason)
+{
+	struct wusbhc *wusbhc = &whc->wusbhc;
+
+	dev_err(&whc->umc->dev, "hardware error: %s\n", reason);
+	wusbhc_reset_all(wusbhc);
+}
diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c
index 2ae5abf69a6..7dc85a0bee7 100644
--- a/drivers/usb/host/whci/pzl.c
+++ b/drivers/usb/host/whci/pzl.c
@@ -183,12 +183,17 @@ void pzl_stop(struct whc *whc)
 void pzl_update(struct whc *whc, uint32_t wusbcmd)
 {
 	struct wusbhc *wusbhc = &whc->wusbhc;
+	long t;
 
 	mutex_lock(&wusbhc->mutex);
 	if (wusbhc->active) {
 		whc_write_wusbcmd(whc, wusbcmd, wusbcmd);
-		wait_event(whc->periodic_list_wq,
-			   (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0);
+		t = wait_event_timeout(
+			whc->periodic_list_wq,
+			(le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0,
+			msecs_to_jiffies(1000));
+		if (t == 0)
+			whc_hw_error(whc, "PZL update timeout");
 	}
 	mutex_unlock(&wusbhc->mutex);
 }
diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h
index 0f3540f04f5..d3543a181dc 100644
--- a/drivers/usb/host/whci/whcd.h
+++ b/drivers/usb/host/whci/whcd.h
@@ -137,6 +137,7 @@ void whc_clean_up(struct whc *whc);
 /* hw.c */
 void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val);
 int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len);
+void whc_hw_error(struct whc *whc, const char *reason);
 
 /* wusb.c */
 int whc_wusbhc_start(struct wusbhc *wusbhc);
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 189a9db0350..ad4fb15b5dc 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -57,7 +57,6 @@
 #define USB_DEVICE_ID_LD_MACHINETEST	0x2040	/* USB Product ID of Machine Test System */
 
 #define USB_VENDOR_ID_VERNIER		0x08f7
-#define USB_DEVICE_ID_VERNIER_LABPRO	0x0001
 #define USB_DEVICE_ID_VERNIER_GOTEMP	0x0002
 #define USB_DEVICE_ID_VERNIER_SKIP	0x0003
 #define USB_DEVICE_ID_VERNIER_CYCLOPS	0x0004
@@ -85,7 +84,6 @@ static struct usb_device_id ld_usb_table [] = {
 	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) },
 	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) },
 	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) },
-	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
 	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
 	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
 	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) },
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index e06810aef2d..4cf27c72423 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -37,6 +37,7 @@
 #define MON_IOCX_GET   _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get)
 #define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch)
 #define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8)
+
 #ifdef CONFIG_COMPAT
 #define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32)
 #define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32)
@@ -921,21 +922,6 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file,
 		}
 		break;
 
-#ifdef CONFIG_COMPAT
-	case MON_IOCX_GET32: {
-		struct mon_bin_get32 getb;
-
-		if (copy_from_user(&getb, (void __user *)arg,
-					    sizeof(struct mon_bin_get32)))
-			return -EFAULT;
-
-		ret = mon_bin_get_event(file, rp,
-		    compat_ptr(getb.hdr32), compat_ptr(getb.data32),
-		    getb.alloc32);
-		}
-		break;
-#endif
-
 	case MON_IOCX_MFETCH:
 		{
 		struct mon_bin_mfetch mfetch;
@@ -962,7 +948,57 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file,
 		}
 		break;
 
+	case MON_IOCG_STATS: {
+		struct mon_bin_stats __user *sp;
+		unsigned int nevents;
+		unsigned int ndropped;
+
+		spin_lock_irqsave(&rp->b_lock, flags);
+		ndropped = rp->cnt_lost;
+		rp->cnt_lost = 0;
+		spin_unlock_irqrestore(&rp->b_lock, flags);
+		nevents = mon_bin_queued(rp);
+
+		sp = (struct mon_bin_stats __user *)arg;
+		if (put_user(rp->cnt_lost, &sp->dropped))
+			return -EFAULT;
+		if (put_user(nevents, &sp->queued))
+			return -EFAULT;
+
+		}
+		break;
+
+	default:
+		return -ENOTTY;
+	}
+
+	return ret;
+}
+
 #ifdef CONFIG_COMPAT
+static long mon_bin_compat_ioctl(struct file *file,
+    unsigned int cmd, unsigned long arg)
+{
+	struct mon_reader_bin *rp = file->private_data;
+	int ret;
+
+	switch (cmd) {
+
+	case MON_IOCX_GET32: {
+		struct mon_bin_get32 getb;
+
+		if (copy_from_user(&getb, (void __user *)arg,
+					    sizeof(struct mon_bin_get32)))
+			return -EFAULT;
+
+		ret = mon_bin_get_event(file, rp,
+		    compat_ptr(getb.hdr32), compat_ptr(getb.data32),
+		    getb.alloc32);
+		if (ret < 0)
+			return ret;
+		}
+		return 0;
+
 	case MON_IOCX_MFETCH32:
 		{
 		struct mon_bin_mfetch32 mfetch;
@@ -986,37 +1022,25 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file,
 			return ret;
 		if (put_user(ret, &uptr->nfetch32))
 			return -EFAULT;
-		ret = 0;
 		}
-		break;
-#endif
-
-	case MON_IOCG_STATS: {
-		struct mon_bin_stats __user *sp;
-		unsigned int nevents;
-		unsigned int ndropped;
-
-		spin_lock_irqsave(&rp->b_lock, flags);
-		ndropped = rp->cnt_lost;
-		rp->cnt_lost = 0;
-		spin_unlock_irqrestore(&rp->b_lock, flags);
-		nevents = mon_bin_queued(rp);
+		return 0;
 
-		sp = (struct mon_bin_stats __user *)arg;
-		if (put_user(rp->cnt_lost, &sp->dropped))
-			return -EFAULT;
-		if (put_user(nevents, &sp->queued))
-			return -EFAULT;
+	case MON_IOCG_STATS:
+		return mon_bin_ioctl(NULL, file, cmd,
+					    (unsigned long) compat_ptr(arg));
 
-		}
-		break;
+	case MON_IOCQ_URB_LEN:
+	case MON_IOCQ_RING_SIZE:
+	case MON_IOCT_RING_SIZE:
+	case MON_IOCH_MFLUSH:
+		return mon_bin_ioctl(NULL, file, cmd, arg);
 
 	default:
-		return -ENOTTY;
+		;
 	}
-
-	return ret;
+	return -ENOTTY;
 }
+#endif /* CONFIG_COMPAT */
 
 static unsigned int
 mon_bin_poll(struct file *file, struct poll_table_struct *wait)
@@ -1094,6 +1118,9 @@ static const struct file_operations mon_fops_binary = {
 	/* .write =	mon_text_write, */
 	.poll =		mon_bin_poll,
 	.ioctl =	mon_bin_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl =	mon_bin_compat_ioctl,
+#endif
 	.release =	mon_bin_release,
 	.mmap =		mon_bin_mmap,
 };
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 5af7379cd9a..9985db08e7d 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -11,6 +11,7 @@ config USB_MUSB_HDRC
 	depends on (USB || USB_GADGET) && HAVE_CLK
 	depends on !SUPERH
 	select TWL4030_USB if MACH_OMAP_3430SDP
+	select USB_OTG_UTILS
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	help
 	  Say Y here if your system has a dual role high speed USB
@@ -49,7 +50,7 @@ comment "OMAP 343x high speed USB support"
 	depends on USB_MUSB_HDRC && ARCH_OMAP34XX
 
 comment "Blackfin high speed USB Support"
-	depends on USB_MUSB_HDRC && (BF54x && !BF544) || (BF52x && !BF522 && !BF523)
+	depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523))
 
 config USB_TUSB6010
 	boolean "TUSB 6010 support"
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 5ad6d0893cb..569ef0fed0f 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -9,6 +9,7 @@
 #include <linux/usb.h>
 
 #include "musb_core.h"
+#include "musb_debug.h"
 #include "cppi_dma.h"
 
 
@@ -423,6 +424,7 @@ cppi_rndis_update(struct cppi_channel *c, int is_rx,
 	}
 }
 
+#ifdef CONFIG_USB_MUSB_DEBUG
 static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
 {
 	pr_debug("RXBD/%s %08x: "
@@ -431,10 +433,11 @@ static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
 			bd->hw_next, bd->hw_bufp, bd->hw_off_len,
 			bd->hw_options);
 }
+#endif
 
 static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx)
 {
-#if MUSB_DEBUG > 0
+#ifdef CONFIG_USB_MUSB_DEBUG
 	struct cppi_descriptor	*bd;
 
 	if (!_dbg_level(level))
@@ -881,12 +884,14 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
 	bd->hw_options |= CPPI_SOP_SET;
 	tail->hw_options |= CPPI_EOP_SET;
 
-	if (debug >= 5) {
+#ifdef CONFIG_USB_MUSB_DEBUG
+	if (_dbg_level(5)) {
 		struct cppi_descriptor	*d;
 
 		for (d = rx->head; d; d = d->next)
 			cppi_dump_rxbd("S", d);
 	}
+#endif
 
 	/* in case the preceding transfer left some state... */
 	tail = rx->last_processed;
@@ -990,6 +995,7 @@ static int cppi_channel_program(struct dma_channel *ch,
 	cppi_ch->offset = 0;
 	cppi_ch->maxpacket = maxpacket;
 	cppi_ch->buf_len = len;
+	cppi_ch->channel.actual_len = 0;
 
 	/* TX channel? or RX? */
 	if (cppi_ch->transmit)
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 0d566dc5ce0..5a8fd5d57a1 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -32,9 +32,10 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <mach/arch/hardware.h>
-#include <mach/arch/memory.h>
-#include <mach/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/memory.h>
+#include <mach/gpio.h>
+
 #include <asm/mach-types.h>
 
 #include "musb_core.h"
@@ -370,12 +371,6 @@ int musb_platform_set_mode(struct musb *musb, u8 mode)
 	return -EIO;
 }
 
-int musb_platform_set_mode(struct musb *musb, u8 mode)
-{
-       /* EVM can't do this (right?) */
-       return -EIO;
-}
-
 int __init musb_platform_init(struct musb *musb)
 {
 	void __iomem	*tibase = musb->ctrl_base;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 6c7faacfb53..2cc34fa05b7 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1824,8 +1824,9 @@ static void musb_free(struct musb *musb)
 	musb_gadget_cleanup(musb);
 #endif
 
-	if (musb->nIrq >= 0 && musb->irq_wake) {
-		disable_irq_wake(musb->nIrq);
+	if (musb->nIrq >= 0) {
+		if (musb->irq_wake)
+			disable_irq_wake(musb->nIrq);
 		free_irq(musb->nIrq, musb);
 	}
 	if (is_dma_capable() && musb->dma_controller) {
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 6197daeab8f..4ea30538798 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -874,10 +874,10 @@ static int musb_gadget_enable(struct usb_ep *ep,
 		status = -EBUSY;
 		goto fail;
 	}
-	musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	musb_ep->type = usb_endpoint_type(desc);
 
 	/* check direction and (later) maxpacket size against endpoint */
-	if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum)
+	if (usb_endpoint_num(desc) != epnum)
 		goto fail;
 
 	/* REVISIT this rules out high bandwidth periodic transfers */
@@ -890,7 +890,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
 	 * packet size (or fail), set the mode, clear the fifo
 	 */
 	musb_ep_select(mbase, epnum);
-	if (desc->bEndpointAddress & USB_DIR_IN) {
+	if (usb_endpoint_dir_in(desc)) {
 		u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
 
 		if (hw_ep->is_shared_fifo)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 99fa6123487..a035ceccf95 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1847,8 +1847,8 @@ static int musb_urb_enqueue(
 		goto done;
 	}
 
-	qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-	qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	qh->epnum = usb_endpoint_num(epd);
+	qh->type = usb_endpoint_type(epd);
 
 	/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
 	qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 52f7f29cebd..7e073a0d7ac 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -15,8 +15,8 @@
 #include <linux/usb.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
 
 #include "musb_core.h"
 
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 8e8dbdb9b39..ee55b449ffd 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -6,14 +6,14 @@
 
 comment "OTG and related infrastructure"
 
-if USB || USB_GADGET
-
 config USB_OTG_UTILS
 	bool
 	help
 	  Select this to make sure the build includes objects from
 	  the OTG infrastructure directory.
 
+if USB || USB_GADGET
+
 #
 # USB Transceiver Drivers
 #
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index cfaf1f08553..027f4b7dde8 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -85,6 +85,8 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
 	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
+	{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
+	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
 	{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c70a8f667d8..75597337583 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -660,6 +660,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
+	{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
+	{ USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 373ee09975b..1b62eff475d 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -854,6 +854,10 @@
 #define FTDI_DOMINTELL_DGQG_PID	0xEF50	/* Master */
 #define FTDI_DOMINTELL_DUSB_PID	0xEF51	/* DUSB01 module */
 
+/* Alti-2 products  http://www.alti-2.com */
+#define ALTI2_VID	0x1BC9
+#define ALTI2_N3_PID	0x6001	/* Neptune 3 */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
@@ -881,6 +885,11 @@
 #define RATOC_PRODUCT_ID_USB60F	0xb020
 
 /*
+ * DIEBOLD BCS SE923
+ */
+#define DIEBOLD_BCS_SE923_PID	0xfb99
+
+/*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ
  *   wValue:         0
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5ed183477aa..6c89da9c6fe 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -158,6 +158,13 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define HUAWEI_PRODUCT_E143E			0x143E
 #define HUAWEI_PRODUCT_E143F			0x143F
 
+#define QUANTA_VENDOR_ID			0x0408
+#define QUANTA_PRODUCT_Q101			0xEA02
+#define QUANTA_PRODUCT_Q111			0xEA03
+#define QUANTA_PRODUCT_GLX			0xEA04
+#define QUANTA_PRODUCT_GKE			0xEA05
+#define QUANTA_PRODUCT_GLE			0xEA06
+
 #define NOVATELWIRELESS_VENDOR_ID		0x1410
 
 /* YISO PRODUCTS */
@@ -224,7 +231,7 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define ONDA_VENDOR_ID				0x19d2
 #define ONDA_PRODUCT_MSA501HS			0x0001
 #define ONDA_PRODUCT_ET502HS			0x0002
-#define ONDA_PRODUCT_MT503HS			0x0200
+#define ONDA_PRODUCT_MT503HS			0x2000
 
 #define BANDRICH_VENDOR_ID			0x1A8D
 #define BANDRICH_PRODUCT_C100_1			0x1002
@@ -298,6 +305,11 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q101) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q111) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 3cf41df302d..baf591137b8 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -184,6 +184,7 @@ static struct usb_device_id ti_id_table_3410[7+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
+	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
@@ -191,6 +192,7 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
+	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = {
@@ -205,6 +207,7 @@ static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] =
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
+	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 	{ }
 };
 
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index 7e4752fbf23..b7ea5dbadee 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -27,7 +27,9 @@
 
 /* Vendor and product ids */
 #define TI_VENDOR_ID			0x0451
+#define IBM_VENDOR_ID			0x04b3
 #define TI_3410_PRODUCT_ID		0x3410
+#define IBM_4543_PRODUCT_ID		0x4543
 #define TI_3410_EZ430_ID		0xF430  /* TI ez430 development tool */
 #define TI_5052_BOOT_PRODUCT_ID		0x5052	/* no EEPROM, no firmware */
 #define TI_5152_BOOT_PRODUCT_ID		0x5152	/* no EEPROM, no firmware */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index a7f9513fa19..69269f73956 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -995,6 +995,16 @@ UNUSUAL_DEV(  0x071b, 0x3203, 0x0000, 0x0000,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
 
+/* Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
+ * Support the following product :
+ *    "Dane-Elec MediaTouch"
+ */
+UNUSUAL_DEV(  0x071b, 0x32bb, 0x0000, 0x0000,
+		"RockChip",
+		"MTP",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
+
 /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
  * This USB MP3/AVI player device fails and disconnects if more than 128
  * sectors (64kB) are read/written in a single command, and may be present
@@ -1251,6 +1261,13 @@ UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
+/* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */
+UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
+		"Argosy",
+		"Storage",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY),
+
 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
  * Flag will support Bulk devices which use a standards-violating 32-byte
  * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
@@ -1589,6 +1606,13 @@ UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT ),
 
+/* Reported by The Solutor <thesolutor@gmail.com> */
+UNUSUAL_DEV(  0x0fce, 0xd0e1, 0x0000, 0x0000,
+		"Sony Ericsson",
+		"MD400",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_DEVICE),
+
 /* Reported by Jan Mate <mate@fiit.stuba.sk>
  * and by Soeren Sonnenburg <kernel@nn7.de> */
 UNUSUAL_DEV(  0x0fce, 0xe030, 0x0000, 0x0000,
@@ -2031,15 +2055,11 @@ UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x0201,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Reported by Mauro Andreolini <andreoli@weblab.ing.unimo.it>
- * This entry is needed to bypass the ZeroCD mechanism
- * and to properly load as a modem device.
- */
-UNUSUAL_DEV(  0x19d2, 0x2000, 0x0000, 0x0000,
-		"Onda ET502HS",
-		"USB MMC Storage",
+UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
+		"ST",
+		"2A",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_IGNORE_DEVICE),
+		US_FL_FIX_CAPACITY),
 
 /* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
  * and Renato Perini <rperini@email.it>
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index e2e7e4bc846..8e18141bb2e 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -386,6 +386,7 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc,
 			  | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED);
 	port->change |= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE;
 	if (wusb_dev) {
+		dev_dbg(wusbhc->dev, "disconnecting device from port %d\n", wusb_dev->port_idx);
 		if (!list_empty(&wusb_dev->cack_node))
 			list_del_init(&wusb_dev->cack_node);
 		/* For the one in cack_add() */
diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c
index 3937bf6f8ce..9fe4246cecb 100644
--- a/drivers/usb/wusbcore/rh.c
+++ b/drivers/usb/wusbcore/rh.c
@@ -100,6 +100,9 @@ static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx)
 	struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx);
 	struct wusb_dev *wusb_dev = port->wusb_dev;
 
+	if (wusb_dev == NULL)
+		return -ENOTCONN;
+
 	port->status |= USB_PORT_STAT_RESET;
 	port->change |= USB_PORT_STAT_C_RESET;
 
diff --git a/drivers/uwb/allocator.c b/drivers/uwb/allocator.c
index c8185e6b0cd..c13cec7dcbc 100644
--- a/drivers/uwb/allocator.c
+++ b/drivers/uwb/allocator.c
@@ -15,7 +15,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/uwb.h>
 
diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c
index 2b4f9406789..4f5ca99a04b 100644
--- a/drivers/uwb/drp.c
+++ b/drivers/uwb/drp.c
@@ -66,14 +66,14 @@ static void uwb_rc_set_drp_cmd_done(struct uwb_rc *rc, void *arg,
 	} else
 		dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: timeout\n");
 
-	spin_lock(&rc->rsvs_lock);
+	spin_lock_bh(&rc->rsvs_lock);
 	if (rc->set_drp_ie_pending > 1) {
 		rc->set_drp_ie_pending = 0;
 		uwb_rsv_queue_update(rc);	
 	} else {
 		rc->set_drp_ie_pending = 0;	
 	}
-	spin_unlock(&rc->rsvs_lock);
+	spin_unlock_bh(&rc->rsvs_lock);
 }
 
 /**
diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c
index ec6eecb32f3..6b76f4bb4cc 100644
--- a/drivers/uwb/rsv.c
+++ b/drivers/uwb/rsv.c
@@ -114,7 +114,8 @@ void uwb_rsv_dump(char *text, struct uwb_rsv *rsv)
 		devaddr = rsv->target.devaddr;
 	uwb_dev_addr_print(target, sizeof(target), &devaddr);
 
-	dev_dbg(dev, "rsv %s -> %s: %s\n", owner, target, uwb_rsv_state_str(rsv->state));
+	dev_dbg(dev, "rsv %s %s -> %s: %s\n",
+		text, owner, target, uwb_rsv_state_str(rsv->state));
 }
 
 static void uwb_rsv_release(struct kref *kref)
@@ -511,8 +512,7 @@ void uwb_rsv_remove(struct uwb_rsv *rsv)
 
 	if (uwb_rsv_is_owner(rsv))
 		uwb_rsv_put_stream(rsv);
-	
-	del_timer_sync(&rsv->timer);
+
 	uwb_dev_put(rsv->owner);
 	if (rsv->target.type == UWB_RSV_TARGET_DEV)
 		uwb_dev_put(rsv->target.dev);
@@ -870,7 +870,7 @@ void uwb_rsv_queue_update(struct uwb_rc *rc)
  */
 void uwb_rsv_sched_update(struct uwb_rc *rc)
 {
-	spin_lock(&rc->rsvs_lock);
+	spin_lock_bh(&rc->rsvs_lock);
 	if (!delayed_work_pending(&rc->rsv_update_work)) {
 		if (rc->set_drp_ie_pending > 0) {
 			rc->set_drp_ie_pending++;
@@ -879,7 +879,7 @@ void uwb_rsv_sched_update(struct uwb_rc *rc)
 		uwb_rsv_queue_update(rc);
 	}
 unlock:
-	spin_unlock(&rc->rsvs_lock);
+	spin_unlock_bh(&rc->rsvs_lock);
 }
 
 /*
@@ -943,13 +943,22 @@ void uwb_rsv_remove_all(struct uwb_rc *rc)
 
 	mutex_lock(&rc->rsvs_mutex);
 	list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) {
-		uwb_rsv_remove(rsv);
+		if (rsv->state != UWB_RSV_STATE_NONE)
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+		del_timer_sync(&rsv->timer);
 	}
 	/* Cancel any postponed update. */
 	rc->set_drp_ie_pending = 0;
 	mutex_unlock(&rc->rsvs_mutex);
 
 	cancel_delayed_work_sync(&rc->rsv_update_work);
+	flush_workqueue(rc->rsv_workq);
+
+	mutex_lock(&rc->rsvs_mutex);
+	list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) {
+		uwb_rsv_remove(rsv);
+	}
+	mutex_unlock(&rc->rsvs_mutex);
 }
 
 void uwb_rsv_init(struct uwb_rc *rc)
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6372f8b17b4..5aa099bc769 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -41,7 +41,7 @@ menuconfig FB
 	  You need an utility program called fbset to make full use of frame
 	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
 	  and the Framebuffer-HOWTO at
-	  <http://www.tahallah.demon.co.uk/programming/prog.html> for more
+	  <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more
 	  information.
 
 	  Say Y here and to the driver for your graphics board below if you
@@ -2123,6 +2123,32 @@ config FB_PRE_INIT_FB
 	  Select this option if display contents should be inherited as set by
 	  the bootloader.
 
+config FB_MX3
+       tristate "MX3 Framebuffer support"
+       depends on FB && MX3_IPU
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       default y
+       help
+         This is a framebuffer device for the i.MX31 LCD Controller. So
+         far only synchronous displays are supported. If you plan to use
+         an LCD display with your i.MX31 system, say Y here.
+
+config FB_BROADSHEET
+	tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
+	depends on FB
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	help
+	  This driver implements support for the E-Ink Broadsheet
+	  controller. The release name for this device was Epson S1D13521
+	  and could also have been called by other names when coupled with
+	  a bridge adapter.
+
 source "drivers/video/omap/Kconfig"
 
 source "drivers/video/backlight/Kconfig"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index be2b657546e..edd5a85c1eb 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_FB_PMAG_BA)	  += pmag-ba-fb.o
 obj-$(CONFIG_FB_PMAGB_B)	  += pmagb-b-fb.o
 obj-$(CONFIG_FB_MAXINE)		  += maxinefb.o
 obj-$(CONFIG_FB_METRONOME)        += metronomefb.o
+obj-$(CONFIG_FB_BROADSHEET)       += broadsheetfb.o
 obj-$(CONFIG_FB_S1D13XXX)	  += s1d13xxxfb.o
 obj-$(CONFIG_FB_SH7760)		  += sh7760fb.o
 obj-$(CONFIG_FB_IMX)              += imxfb.o
@@ -132,6 +133,7 @@ obj-$(CONFIG_FB_VGA16)            += vga16fb.o
 obj-$(CONFIG_FB_OF)               += offb.o
 obj-$(CONFIG_FB_BF54X_LQ043)	  += bf54x-lq043fb.o
 obj-$(CONFIG_FB_BFIN_T350MCQB)	  += bfin-t350mcqb-fb.o
+obj-$(CONFIG_FB_MX3)              += mx3fb.o
 
 # the test framebuffer is last
 obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index db16112cf19..fb2b0f5b23b 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -1475,7 +1475,7 @@ static int aty128fb_set_par(struct fb_info *info)
 	aty128_set_pll(&par->pll, par);
 	aty128_set_fifo(&par->fifo_reg, par);
 
-	config = aty_ld_le32(CONFIG_CNTL) & ~3;
+	config = aty_ld_le32(CNFG_CNTL) & ~3;
 
 #if defined(__BIG_ENDIAN)
 	if (par->crtc.bpp == 32)
@@ -1484,7 +1484,7 @@ static int aty128fb_set_par(struct fb_info *info)
 		config |= 1;	/* make aperture do 16 bit swapping */
 #endif
 
-	aty_st_le32(CONFIG_CNTL, config);
+	aty_st_le32(CNFG_CNTL, config);
 	aty_st_8(CRTC_EXT_CNTL + 1, 0);	/* turn the video back on */
 
 	info->fix.line_length = (par->crtc.vxres * par->crtc.bpp) >> 3;
@@ -1875,7 +1875,7 @@ static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_i
 	u32 dac;
 
 	/* Get the chip revision */
-	chip_rev = (aty_ld_le32(CONFIG_CNTL) >> 16) & 0x1F;
+	chip_rev = (aty_ld_le32(CNFG_CNTL) >> 16) & 0x1F;
 
 	strcpy(video_card, "Rage128 XX ");
 	video_card[8] = ent->device >> 8;
@@ -2057,7 +2057,7 @@ static int __devinit aty128_probe(struct pci_dev *pdev, const struct pci_device_
 
 	/* Grab memory size from the card */
 	// How does this relate to the resource length from the PCI hardware?
-	par->vram_size = aty_ld_le32(CONFIG_MEMSIZE) & 0x03FFFFFF;
+	par->vram_size = aty_ld_le32(CNFG_MEMSIZE) & 0x03FFFFFF;
 
 	/* Virtualize the framebuffer */
 	info->screen_base = ioremap(fb_addr, par->vram_size);
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index cc6b470073d..1d6e16d346a 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -135,7 +135,7 @@
 #if defined(CONFIG_PM) || defined(CONFIG_PMAC_BACKLIGHT) || \
 defined (CONFIG_FB_ATY_GENERIC_LCD) || defined(CONFIG_FB_ATY_BACKLIGHT)
 static const u32 lt_lcd_regs[] = {
-	CONFIG_PANEL_LG,
+	CNFG_PANEL_LG,
 	LCD_GEN_CNTL_LG,
 	DSTN_CONTROL_LG,
 	HFB_PITCH_ADDR_LG,
@@ -446,7 +446,7 @@ static int __devinit correct_chipset(struct atyfb_par *par)
 	par->pll_limits.ecp_max = aty_chips[i].ecp_max;
 	par->features = aty_chips[i].features;
 
-	chip_id = aty_ld_le32(CONFIG_CHIP_ID, par);
+	chip_id = aty_ld_le32(CNFG_CHIP_ID, par);
 	type = chip_id & CFG_CHIP_TYPE;
 	rev = (chip_id & CFG_CHIP_REV) >> 24;
 
@@ -629,7 +629,7 @@ static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc)
 		    crtc->lcd_index = aty_ld_le32(LCD_INDEX, par);
 		    aty_st_le32(LCD_INDEX, crtc->lcd_index, par);
 		}
-		crtc->lcd_config_panel = aty_ld_lcd(CONFIG_PANEL, par);
+		crtc->lcd_config_panel = aty_ld_lcd(CNFG_PANEL, par);
 		crtc->lcd_gen_cntl = aty_ld_lcd(LCD_GEN_CNTL, par);
 
 
@@ -676,7 +676,7 @@ static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc)
 		aty_st_le32(CRTC_GEN_CNTL, crtc->gen_cntl & ~(CRTC_EXT_DISP_EN | CRTC_EN), par);
 
 		/* update non-shadow registers first */
-		aty_st_lcd(CONFIG_PANEL, crtc->lcd_config_panel, par);
+		aty_st_lcd(CNFG_PANEL, crtc->lcd_config_panel, par);
 		aty_st_lcd(LCD_GEN_CNTL, crtc->lcd_gen_cntl &
 			~(CRTC_RW_SELECT | SHADOW_EN | SHADOW_RW_EN), par);
 
@@ -858,7 +858,7 @@ static int aty_var_to_crtc(const struct fb_info *info,
 		if (!M64_HAS(MOBIL_BUS))
 			crtc->lcd_index |= CRTC2_DISPLAY_DIS;
 
-		crtc->lcd_config_panel = aty_ld_lcd(CONFIG_PANEL, par) | 0x4000;
+		crtc->lcd_config_panel = aty_ld_lcd(CNFG_PANEL, par) | 0x4000;
 		crtc->lcd_gen_cntl = aty_ld_lcd(LCD_GEN_CNTL, par) & ~CRTC_RW_SELECT;
 
 		crtc->lcd_gen_cntl &=
@@ -2254,7 +2254,7 @@ static int __devinit aty_init(struct fb_info *info)
 	if (!M64_HAS(INTEGRATED)) {
 		u32 stat0;
 		u8 dac_type, dac_subtype, clk_type;
-		stat0 = aty_ld_le32(CONFIG_STAT0, par);
+		stat0 = aty_ld_le32(CNFG_STAT0, par);
 		par->bus_type = (stat0 >> 0) & 0x07;
 		par->ram_type = (stat0 >> 3) & 0x07;
 		ramname = aty_gx_ram[par->ram_type];
@@ -2324,7 +2324,7 @@ static int __devinit aty_init(struct fb_info *info)
 		par->dac_ops = &aty_dac_ct;
 		par->pll_ops = &aty_pll_ct;
 		par->bus_type = PCI;
-		par->ram_type = (aty_ld_le32(CONFIG_STAT0, par) & 0x07);
+		par->ram_type = (aty_ld_le32(CNFG_STAT0, par) & 0x07);
 		ramname = aty_ct_ram[par->ram_type];
 		/* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */
 		if (par->pll_limits.mclk == 67 && par->ram_type < SDRAM)
@@ -2433,7 +2433,7 @@ static int __devinit aty_init(struct fb_info *info)
 		}
 
 	if (M64_HAS(MAGIC_VRAM_SIZE)) {
-		if (aty_ld_le32(CONFIG_STAT1, par) & 0x40000000)
+		if (aty_ld_le32(CNFG_STAT1, par) & 0x40000000)
 			info->fix.smem_len += 0x400000;
 	}
 
@@ -2946,7 +2946,7 @@ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev,
 		 * Fix PROMs idea of MEM_CNTL settings...
 		 */
 		mem = aty_ld_le32(MEM_CNTL, par);
-		chip_id = aty_ld_le32(CONFIG_CHIP_ID, par);
+		chip_id = aty_ld_le32(CNFG_CHIP_ID, par);
 		if (((chip_id & CFG_CHIP_TYPE) == VT_CHIP_ID) && !((chip_id >> 24) & 1)) {
 			switch (mem & 0x0f) {
 			case 3:
@@ -2964,7 +2964,7 @@ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev,
 			default:
 				break;
 			}
-			if ((aty_ld_le32(CONFIG_STAT0, par) & 7) >= SDRAM)
+			if ((aty_ld_le32(CNFG_STAT0, par) & 7) >= SDRAM)
 				mem &= ~(0x00700000);
 		}
 		mem &= ~(0xcf80e000);	/* Turn off all undocumented bits. */
@@ -3572,7 +3572,7 @@ static int __init atyfb_atari_probe(void)
 		}
 
 		/* Fake pci_id for correct_chipset() */
-		switch (aty_ld_le32(CONFIG_CHIP_ID, par) & CFG_CHIP_TYPE) {
+		switch (aty_ld_le32(CNFG_CHIP_ID, par) & CFG_CHIP_TYPE) {
 		case 0x00d7:
 			par->pci_id = PCI_CHIP_MACH64GX;
 			break;
diff --git a/drivers/video/aty/mach64_ct.c b/drivers/video/aty/mach64_ct.c
index c50c7cf26fe..2745b853948 100644
--- a/drivers/video/aty/mach64_ct.c
+++ b/drivers/video/aty/mach64_ct.c
@@ -8,6 +8,9 @@
 #include <asm/io.h>
 #include <video/mach64.h>
 #include "atyfb.h"
+#ifdef CONFIG_PPC
+#include <asm/machdep.h>
+#endif
 
 #undef DEBUG
 
@@ -536,6 +539,14 @@ static int __devinit aty_init_pll_ct(const struct fb_info *info,
 	pll->ct.xclk_post_div_real = postdividers[xpost_div];
 	pll->ct.mclk_fb_div = q * pll->ct.xclk_post_div_real / 8;
 
+#ifdef CONFIG_PPC
+	if (machine_is(powermac)) {
+		/* Override PLL_EXT_CNTL & 0x07. */
+		pll->ct.xclk_post_div = xpost_div;
+		pll->ct.xclk_ref_div = 1;
+	}
+#endif
+
 #ifdef DEBUG
 	pllmclk = (1000000 * pll->ct.mclk_fb_mult * pll->ct.mclk_fb_div) /
 			(par->ref_clk_per * pll->ct.pll_ref_div);
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index d0f1a7fc2c9..16bb7e3c031 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -1936,8 +1936,8 @@ static void fixup_memory_mappings(struct radeonfb_info *rinfo)
 	OUTREG(CRTC_GEN_CNTL, save_crtc_gen_cntl | CRTC_DISP_REQ_EN_B);
 	mdelay(100);
 
-	aper_base = INREG(CONFIG_APER_0_BASE);
-	aper_size = INREG(CONFIG_APER_SIZE);
+	aper_base = INREG(CNFG_APER_0_BASE);
+	aper_size = INREG(CNFG_APER_SIZE);
 
 #ifdef SET_MC_FB_FROM_APERTURE
 	/* Set framebuffer to be at the same address as set in PCI BAR */
@@ -2024,11 +2024,11 @@ static void radeon_identify_vram(struct radeonfb_info *rinfo)
                      ~CRTC_H_CUTOFF_ACTIVE_EN);
           }
         } else {
-          tmp = INREG(CONFIG_MEMSIZE);
+          tmp = INREG(CNFG_MEMSIZE);
         }
 
 	/* mem size is bits [28:0], mask off the rest */
-	rinfo->video_ram = tmp & CONFIG_MEMSIZE_MASK;
+	rinfo->video_ram = tmp & CNFG_MEMSIZE_MASK;
 
 	/*
 	 * Hack to get around some busted production M6's
@@ -2228,7 +2228,7 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
 	 */
 	rinfo->errata = 0;
 	if (rinfo->family == CHIP_FAMILY_R300 &&
-	    (INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK)
+	    (INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK)
 	    == CFG_ATI_REV_A11)
 		rinfo->errata |= CHIP_ERRATA_R300_CG;
 
diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c
index 2c5567175dc..359fc64e761 100644
--- a/drivers/video/aty/radeon_i2c.c
+++ b/drivers/video/aty/radeon_i2c.c
@@ -72,7 +72,6 @@ static int radeon_setup_i2c_bus(struct radeon_i2c_chan *chan, const char *name)
 	snprintf(chan->adapter.name, sizeof(chan->adapter.name),
 		 "radeonfb %s", name);
 	chan->adapter.owner		= THIS_MODULE;
-	chan->adapter.id		= I2C_HW_B_RADEON;
 	chan->adapter.algo_data		= &chan->algo;
 	chan->adapter.dev.parent	= &chan->rinfo->pdev->dev;
 	chan->algo.setsda		= radeon_gpio_setsda;
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index 675abdafc2d..c4ac2a032fc 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -333,7 +333,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo)
 	if (!rinfo->has_CRTC2) {
                 tmp = INPLL(pllSCLK_CNTL);
 
-		if ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) > CFG_ATI_REV_A13)
+		if ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) > CFG_ATI_REV_A13)
                     tmp &= ~(SCLK_CNTL__FORCE_CP	| SCLK_CNTL__FORCE_RB);
                 tmp &= ~(SCLK_CNTL__FORCE_HDP		| SCLK_CNTL__FORCE_DISP1 |
 			 SCLK_CNTL__FORCE_TOP		| SCLK_CNTL__FORCE_SE   |
@@ -468,9 +468,9 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo)
 
 	/*RAGE_6::A11 A12 A12N1 A13, RV250::A11 A12, R300*/
 	if ((rinfo->family == CHIP_FAMILY_RV250 &&
-	     ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) ||
+	     ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) ||
 	    ((rinfo->family == CHIP_FAMILY_RV100) &&
-	     ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) <= CFG_ATI_REV_A13))) {
+	     ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) <= CFG_ATI_REV_A13))) {
 		tmp |= SCLK_CNTL__FORCE_CP;
 		tmp |= SCLK_CNTL__FORCE_VIP;
 	}
@@ -486,7 +486,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo)
 		/* RV200::A11 A12 RV250::A11 A12 */
 		if (((rinfo->family == CHIP_FAMILY_RV200) ||
 		     (rinfo->family == CHIP_FAMILY_RV250)) &&
-		    ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13))
+		    ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13))
 			tmp |= SCLK_MORE_CNTL__FORCEON;
 
 		OUTPLL(pllSCLK_MORE_CNTL, tmp);
@@ -497,7 +497,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo)
 	/* RV200::A11 A12, RV250::A11 A12 */
 	if (((rinfo->family == CHIP_FAMILY_RV200) ||
 	     (rinfo->family == CHIP_FAMILY_RV250)) &&
-	    ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) {
+	    ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) {
 		tmp = INPLL(pllPLL_PWRMGT_CNTL);
 		tmp |= PLL_PWRMGT_CNTL__TCL_BYPASS_DISABLE;
 		OUTPLL(pllPLL_PWRMGT_CNTL, tmp);
@@ -702,7 +702,7 @@ static void radeon_pm_restore_regs(struct radeonfb_info *rinfo)
 	OUTREG(DISPLAY_BASE_ADDR, rinfo->save_regs[31]);
 	OUTREG(MC_AGP_LOCATION, rinfo->save_regs[32]);
 	OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]);
-	OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
+	OUTREG(CNFG_MEMSIZE, rinfo->video_ram);
 
 	OUTREG(DISP_MISC_CNTL, rinfo->save_regs[9]);
 	OUTREG(DISP_PWR_MAN, rinfo->save_regs[10]);
@@ -1723,7 +1723,7 @@ static void radeon_reinitialize_M10(struct radeonfb_info *rinfo)
 	OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]);
 	OUTREG(MC_FB_LOCATION, rinfo->save_regs[30]);
 	OUTREG(OV0_BASE_ADDR, rinfo->save_regs[80]);
-	OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
+	OUTREG(CNFG_MEMSIZE, rinfo->video_ram);
 	OUTREG(BUS_CNTL, rinfo->save_regs[36]);
 	OUTREG(BUS_CNTL1, rinfo->save_regs[14]);
 	OUTREG(MPP_TB_CONFIG, rinfo->save_regs[37]);
@@ -1961,7 +1961,7 @@ static void radeon_pm_m9p_reconfigure_mc(struct radeonfb_info *rinfo)
 	OUTMC(rinfo, ixMC_CHP_IO_CNTL_B1, rinfo->save_regs[68] /*0x141555ff*/);
 	OUTMC(rinfo, ixMC_IMP_CNTL_0, rinfo->save_regs[71] /*0x00009249*/);
 	OUTREG(MC_IND_INDEX, 0);
-	OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
+	OUTREG(CNFG_MEMSIZE, rinfo->video_ram);
 
 	mdelay(20);
 }
@@ -2361,7 +2361,7 @@ static void radeon_reinitialize_QW(struct radeonfb_info *rinfo)
 	OUTMC(rinfo, ixMC_IMP_CNTL_0, 0x00009249);
 	OUTREG(MC_IND_INDEX, 0);
 
-	OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
+	OUTREG(CNFG_MEMSIZE, rinfo->video_ram);
 
 	radeon_pm_full_reset_sdram(rinfo);
 
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 363b3cb2f01..63d75949816 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_BACKLIGHT_OMAP1)	+= omap1_bl.o
 obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
 obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
 obj-$(CONFIG_BACKLIGHT_PWM)	+= pwm_bl.o
-obj-$(CONFIG_BACKLIGHT_DA903X)	+= da903x.o
+obj-$(CONFIG_BACKLIGHT_DA903X)	+= da903x_bl.o
 obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o
 obj-$(CONFIG_BACKLIGHT_TOSA)	+= tosa_bl.o
 obj-$(CONFIG_BACKLIGHT_SAHARA)	+= kb3886_bl.o
diff --git a/drivers/video/backlight/da903x.c b/drivers/video/backlight/da903x_bl.c
index 93bb4340cc6..93bb4340cc6 100644
--- a/drivers/video/backlight/da903x.c
+++ b/drivers/video/backlight/da903x_bl.c
diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c
new file mode 100644
index 00000000000..509cb92e873
--- /dev/null
+++ b/drivers/video/broadsheetfb.c
@@ -0,0 +1,568 @@
+/*
+ * broadsheetfb.c -- FB driver for E-Ink Broadsheet controller
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This driver is written to be used with the Broadsheet display controller.
+ *
+ * It is intended to be architecture independent. A board specific driver
+ * must be used to perform all the physical IO interactions.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/uaccess.h>
+
+#include <video/broadsheetfb.h>
+
+/* Display specific information */
+#define DPY_W 800
+#define DPY_H 600
+
+static struct fb_fix_screeninfo broadsheetfb_fix __devinitdata = {
+	.id =		"broadsheetfb",
+	.type =		FB_TYPE_PACKED_PIXELS,
+	.visual =	FB_VISUAL_STATIC_PSEUDOCOLOR,
+	.xpanstep =	0,
+	.ypanstep =	0,
+	.ywrapstep =	0,
+	.line_length =	DPY_W,
+	.accel =	FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo broadsheetfb_var __devinitdata = {
+	.xres		= DPY_W,
+	.yres		= DPY_H,
+	.xres_virtual	= DPY_W,
+	.yres_virtual	= DPY_H,
+	.bits_per_pixel	= 8,
+	.grayscale	= 1,
+	.red =		{ 0, 4, 0 },
+	.green =	{ 0, 4, 0 },
+	.blue =		{ 0, 4, 0 },
+	.transp =	{ 0, 0, 0 },
+};
+
+/* main broadsheetfb functions */
+static void broadsheet_issue_data(struct broadsheetfb_par *par, u16 data)
+{
+	par->board->set_ctl(par, BS_WR, 0);
+	par->board->set_hdb(par, data);
+	par->board->set_ctl(par, BS_WR, 1);
+}
+
+static void broadsheet_issue_cmd(struct broadsheetfb_par *par, u16 data)
+{
+	par->board->set_ctl(par, BS_DC, 0);
+	broadsheet_issue_data(par, data);
+}
+
+static void broadsheet_send_command(struct broadsheetfb_par *par, u16 data)
+{
+	par->board->wait_for_rdy(par);
+
+	par->board->set_ctl(par, BS_CS, 0);
+	broadsheet_issue_cmd(par, data);
+	par->board->set_ctl(par, BS_DC, 1);
+	par->board->set_ctl(par, BS_CS, 1);
+}
+
+static void broadsheet_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
+					int argc, u16 *argv)
+{
+	int i;
+
+	par->board->wait_for_rdy(par);
+
+	par->board->set_ctl(par, BS_CS, 0);
+	broadsheet_issue_cmd(par, cmd);
+	par->board->set_ctl(par, BS_DC, 1);
+
+	for (i = 0; i < argc; i++)
+		broadsheet_issue_data(par, argv[i]);
+	par->board->set_ctl(par, BS_CS, 1);
+}
+
+static void broadsheet_burst_write(struct broadsheetfb_par *par, int size,
+					u16 *data)
+{
+	int i;
+	u16 tmp;
+
+	par->board->set_ctl(par, BS_CS, 0);
+	par->board->set_ctl(par, BS_DC, 1);
+
+	for (i = 0; i < size; i++) {
+		par->board->set_ctl(par, BS_WR, 0);
+		tmp = (data[i] & 0x0F) << 4;
+		tmp |= (data[i] & 0x0F00) << 4;
+		par->board->set_hdb(par, tmp);
+		par->board->set_ctl(par, BS_WR, 1);
+	}
+
+	par->board->set_ctl(par, BS_CS, 1);
+}
+
+static u16 broadsheet_get_data(struct broadsheetfb_par *par)
+{
+	u16 res;
+	/* wait for ready to go hi. (lo is busy) */
+	par->board->wait_for_rdy(par);
+
+	/* cs lo, dc lo for cmd, we lo for each data, db as usual */
+	par->board->set_ctl(par, BS_DC, 1);
+	par->board->set_ctl(par, BS_CS, 0);
+	par->board->set_ctl(par, BS_WR, 0);
+
+	res = par->board->get_hdb(par);
+
+	/* strobe wr */
+	par->board->set_ctl(par, BS_WR, 1);
+	par->board->set_ctl(par, BS_CS, 1);
+
+	return res;
+}
+
+static void broadsheet_write_reg(struct broadsheetfb_par *par, u16 reg,
+					u16 data)
+{
+	/* wait for ready to go hi. (lo is busy) */
+	par->board->wait_for_rdy(par);
+
+	/* cs lo, dc lo for cmd, we lo for each data, db as usual */
+	par->board->set_ctl(par, BS_CS, 0);
+
+	broadsheet_issue_cmd(par, BS_CMD_WR_REG);
+
+	par->board->set_ctl(par, BS_DC, 1);
+
+	broadsheet_issue_data(par, reg);
+	broadsheet_issue_data(par, data);
+
+	par->board->set_ctl(par, BS_CS, 1);
+}
+
+static u16 broadsheet_read_reg(struct broadsheetfb_par *par, u16 reg)
+{
+	broadsheet_send_command(par, reg);
+	msleep(100);
+	return broadsheet_get_data(par);
+}
+
+static void __devinit broadsheet_init_display(struct broadsheetfb_par *par)
+{
+	u16 args[5];
+
+	args[0] = DPY_W;
+	args[1] = DPY_H;
+	args[2] = (100 | (1 << 8) | (1 << 9)); /* sdcfg */
+	args[3] = 2; /* gdrv cfg */
+	args[4] = (4 | (1 << 7)); /* lut index format */
+	broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
+
+	/* did the controller really set it? */
+	broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
+
+	args[0] = 4; /* fsync len */
+	args[1] = (10 << 8) | 4; /* fend/fbegin len */
+	args[2] = 10; /* line sync len */
+	args[3] = (100 << 8) | 4; /* line end/begin len */
+	args[4] = 6; /* pixel clock cfg */
+	broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_TMG, 5, args);
+
+	/* setup waveform */
+	args[0] = 0x886;
+	args[1] = 0;
+	broadsheet_send_cmdargs(par, BS_CMD_RD_WFM_INFO, 2, args);
+
+	broadsheet_send_command(par, BS_CMD_UPD_GDRV_CLR);
+
+	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+	broadsheet_write_reg(par, 0x330, 0x84);
+
+	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+	args[0] = (0x3 << 4);
+	broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args);
+
+	args[0] = 0x154;
+	broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
+
+	broadsheet_burst_write(par, DPY_W*DPY_H/2,
+				(u16 *) par->info->screen_base);
+
+	broadsheet_send_command(par, BS_CMD_LD_IMG_END);
+
+	args[0] = 0x4300;
+	broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
+
+	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
+
+	par->board->wait_for_rdy(par);
+}
+
+static void __devinit broadsheet_init(struct broadsheetfb_par *par)
+{
+	broadsheet_send_command(par, BS_CMD_INIT_SYS_RUN);
+	/* the controller needs a second */
+	msleep(1000);
+	broadsheet_init_display(par);
+}
+
+static void broadsheetfb_dpy_update_pages(struct broadsheetfb_par *par,
+						u16 y1, u16 y2)
+{
+	u16 args[5];
+	unsigned char *buf = (unsigned char *)par->info->screen_base;
+
+	/* y1 must be a multiple of 4 so drop the lower bits */
+	y1 &= 0xFFFC;
+	/* y2 must be a multiple of 4 , but - 1 so up the lower bits */
+	y2 |= 0x0003;
+
+	args[0] = 0x3 << 4;
+	args[1] = 0;
+	args[2] = y1;
+	args[3] = cpu_to_le16(par->info->var.xres);
+	args[4] = y2;
+	broadsheet_send_cmdargs(par, BS_CMD_LD_IMG_AREA, 5, args);
+
+	args[0] = 0x154;
+	broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
+
+	buf += y1 * par->info->var.xres;
+	broadsheet_burst_write(par, ((1 + y2 - y1) * par->info->var.xres)/2,
+				(u16 *) buf);
+
+	broadsheet_send_command(par, BS_CMD_LD_IMG_END);
+
+	args[0] = 0x4300;
+	broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
+
+	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
+
+	par->board->wait_for_rdy(par);
+
+}
+
+static void broadsheetfb_dpy_update(struct broadsheetfb_par *par)
+{
+	u16 args[5];
+
+	args[0] = 0x3 << 4;
+	broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args);
+
+	args[0] = 0x154;
+	broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
+	broadsheet_burst_write(par, DPY_W*DPY_H/2,
+				(u16 *) par->info->screen_base);
+
+	broadsheet_send_command(par, BS_CMD_LD_IMG_END);
+
+	args[0] = 0x4300;
+	broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
+
+	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
+
+	par->board->wait_for_rdy(par);
+
+}
+
+/* this is called back from the deferred io workqueue */
+static void broadsheetfb_dpy_deferred_io(struct fb_info *info,
+				struct list_head *pagelist)
+{
+	u16 y1 = 0, h = 0;
+	int prev_index = -1;
+	struct page *cur;
+	struct fb_deferred_io *fbdefio = info->fbdefio;
+	int h_inc;
+	u16 yres = info->var.yres;
+	u16 xres = info->var.xres;
+
+	/* height increment is fixed per page */
+	h_inc = DIV_ROUND_UP(PAGE_SIZE , xres);
+
+	/* walk the written page list and swizzle the data */
+	list_for_each_entry(cur, &fbdefio->pagelist, lru) {
+		if (prev_index < 0) {
+			/* just starting so assign first page */
+			y1 = (cur->index << PAGE_SHIFT) / xres;
+			h = h_inc;
+		} else if ((prev_index + 1) == cur->index) {
+			/* this page is consecutive so increase our height */
+			h += h_inc;
+		} else {
+			/* page not consecutive, issue previous update first */
+			broadsheetfb_dpy_update_pages(info->par, y1, y1 + h);
+			/* start over with our non consecutive page */
+			y1 = (cur->index << PAGE_SHIFT) / xres;
+			h = h_inc;
+		}
+		prev_index = cur->index;
+	}
+
+	/* if we still have any pages to update we do so now */
+	if (h >= yres) {
+		/* its a full screen update, just do it */
+		broadsheetfb_dpy_update(info->par);
+	} else {
+		broadsheetfb_dpy_update_pages(info->par, y1,
+						min((u16) (y1 + h), yres));
+	}
+}
+
+static void broadsheetfb_fillrect(struct fb_info *info,
+				   const struct fb_fillrect *rect)
+{
+	struct broadsheetfb_par *par = info->par;
+
+	sys_fillrect(info, rect);
+
+	broadsheetfb_dpy_update(par);
+}
+
+static void broadsheetfb_copyarea(struct fb_info *info,
+				   const struct fb_copyarea *area)
+{
+	struct broadsheetfb_par *par = info->par;
+
+	sys_copyarea(info, area);
+
+	broadsheetfb_dpy_update(par);
+}
+
+static void broadsheetfb_imageblit(struct fb_info *info,
+				const struct fb_image *image)
+{
+	struct broadsheetfb_par *par = info->par;
+
+	sys_imageblit(info, image);
+
+	broadsheetfb_dpy_update(par);
+}
+
+/*
+ * this is the slow path from userspace. they can seek and write to
+ * the fb. it's inefficient to do anything less than a full screen draw
+ */
+static ssize_t broadsheetfb_write(struct fb_info *info, const char __user *buf,
+				size_t count, loff_t *ppos)
+{
+	struct broadsheetfb_par *par = info->par;
+	unsigned long p = *ppos;
+	void *dst;
+	int err = 0;
+	unsigned long total_size;
+
+	if (info->state != FBINFO_STATE_RUNNING)
+		return -EPERM;
+
+	total_size = info->fix.smem_len;
+
+	if (p > total_size)
+		return -EFBIG;
+
+	if (count > total_size) {
+		err = -EFBIG;
+		count = total_size;
+	}
+
+	if (count + p > total_size) {
+		if (!err)
+			err = -ENOSPC;
+
+		count = total_size - p;
+	}
+
+	dst = (void *)(info->screen_base + p);
+
+	if (copy_from_user(dst, buf, count))
+		err = -EFAULT;
+
+	if  (!err)
+		*ppos += count;
+
+	broadsheetfb_dpy_update(par);
+
+	return (err) ? err : count;
+}
+
+static struct fb_ops broadsheetfb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_read        = fb_sys_read,
+	.fb_write	= broadsheetfb_write,
+	.fb_fillrect	= broadsheetfb_fillrect,
+	.fb_copyarea	= broadsheetfb_copyarea,
+	.fb_imageblit	= broadsheetfb_imageblit,
+};
+
+static struct fb_deferred_io broadsheetfb_defio = {
+	.delay		= HZ/4,
+	.deferred_io	= broadsheetfb_dpy_deferred_io,
+};
+
+static int __devinit broadsheetfb_probe(struct platform_device *dev)
+{
+	struct fb_info *info;
+	struct broadsheet_board *board;
+	int retval = -ENOMEM;
+	int videomemorysize;
+	unsigned char *videomemory;
+	struct broadsheetfb_par *par;
+	int i;
+
+	/* pick up board specific routines */
+	board = dev->dev.platform_data;
+	if (!board)
+		return -EINVAL;
+
+	/* try to count device specific driver, if can't, platform recalls */
+	if (!try_module_get(board->owner))
+		return -ENODEV;
+
+	info = framebuffer_alloc(sizeof(struct broadsheetfb_par), &dev->dev);
+	if (!info)
+		goto err;
+
+	videomemorysize = (DPY_W*DPY_H);
+	videomemory = vmalloc(videomemorysize);
+	if (!videomemory)
+		goto err_fb_rel;
+
+	memset(videomemory, 0, videomemorysize);
+
+	info->screen_base = (char *)videomemory;
+	info->fbops = &broadsheetfb_ops;
+
+	info->var = broadsheetfb_var;
+	info->fix = broadsheetfb_fix;
+	info->fix.smem_len = videomemorysize;
+	par = info->par;
+	par->info = info;
+	par->board = board;
+	par->write_reg = broadsheet_write_reg;
+	par->read_reg = broadsheet_read_reg;
+	init_waitqueue_head(&par->waitq);
+
+	info->flags = FBINFO_FLAG_DEFAULT;
+
+	info->fbdefio = &broadsheetfb_defio;
+	fb_deferred_io_init(info);
+
+	retval = fb_alloc_cmap(&info->cmap, 16, 0);
+	if (retval < 0) {
+		dev_err(&dev->dev, "Failed to allocate colormap\n");
+		goto err_vfree;
+	}
+
+	/* set cmap */
+	for (i = 0; i < 16; i++)
+		info->cmap.red[i] = (((2*i)+1)*(0xFFFF))/32;
+	memcpy(info->cmap.green, info->cmap.red, sizeof(u16)*16);
+	memcpy(info->cmap.blue, info->cmap.red, sizeof(u16)*16);
+
+	retval = par->board->setup_irq(info);
+	if (retval < 0)
+		goto err_cmap;
+
+	/* this inits the dpy */
+	retval = board->init(par);
+	if (retval < 0)
+		goto err_free_irq;
+
+	broadsheet_init(par);
+
+	retval = register_framebuffer(info);
+	if (retval < 0)
+		goto err_free_irq;
+	platform_set_drvdata(dev, info);
+
+	printk(KERN_INFO
+	       "fb%d: Broadsheet frame buffer, using %dK of video memory\n",
+	       info->node, videomemorysize >> 10);
+
+
+	return 0;
+
+err_free_irq:
+	board->cleanup(par);
+err_cmap:
+	fb_dealloc_cmap(&info->cmap);
+err_vfree:
+	vfree(videomemory);
+err_fb_rel:
+	framebuffer_release(info);
+err:
+	module_put(board->owner);
+	return retval;
+
+}
+
+static int __devexit broadsheetfb_remove(struct platform_device *dev)
+{
+	struct fb_info *info = platform_get_drvdata(dev);
+
+	if (info) {
+		struct broadsheetfb_par *par = info->par;
+		unregister_framebuffer(info);
+		fb_deferred_io_cleanup(info);
+		par->board->cleanup(par);
+		fb_dealloc_cmap(&info->cmap);
+		vfree((void *)info->screen_base);
+		module_put(par->board->owner);
+		framebuffer_release(info);
+	}
+	return 0;
+}
+
+static struct platform_driver broadsheetfb_driver = {
+	.probe	= broadsheetfb_probe,
+	.remove = broadsheetfb_remove,
+	.driver	= {
+		.owner	= THIS_MODULE,
+		.name	= "broadsheetfb",
+	},
+};
+
+static int __init broadsheetfb_init(void)
+{
+	return platform_driver_register(&broadsheetfb_driver);
+}
+
+static void __exit broadsheetfb_exit(void)
+{
+	platform_driver_unregister(&broadsheetfb_driver);
+}
+
+module_init(broadsheetfb_init);
+module_exit(broadsheetfb_exit);
+
+MODULE_DESCRIPTION("fbdev driver for Broadsheet controller");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index 7a9e42e3a9a..51b373657aa 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -1425,7 +1425,7 @@ static void cyberpro_common_resume(struct cfb_info *cfb)
 
 #ifdef CONFIG_ARCH_SHARK
 
-#include <mach/hardware.h>
+#include <mach/framebuffer.h>
 
 static int __devinit cyberpro_vl_probe(void)
 {
diff --git a/drivers/video/fbcmap.c b/drivers/video/fbcmap.c
index 91b78e69150..f53b9f1d6ab 100644
--- a/drivers/video/fbcmap.c
+++ b/drivers/video/fbcmap.c
@@ -250,10 +250,6 @@ int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *info)
 	int rc, size = cmap->len * sizeof(u16);
 	struct fb_cmap umap;
 
-	if (cmap->start < 0 || (!info->fbops->fb_setcolreg &&
-			        !info->fbops->fb_setcmap))
-		return -EINVAL;
-
 	memset(&umap, 0, sizeof(struct fb_cmap));
 	rc = fb_alloc_cmap(&umap, cmap->len, cmap->transp != NULL);
 	if (rc)
@@ -262,11 +258,23 @@ int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *info)
 	    copy_from_user(umap.green, cmap->green, size) ||
 	    copy_from_user(umap.blue, cmap->blue, size) ||
 	    (cmap->transp && copy_from_user(umap.transp, cmap->transp, size))) {
-		fb_dealloc_cmap(&umap);
-		return -EFAULT;
+		rc = -EFAULT;
+		goto out;
 	}
 	umap.start = cmap->start;
+	if (!lock_fb_info(info)) {
+		rc = -ENODEV;
+		goto out;
+	}
+	if (cmap->start < 0 || (!info->fbops->fb_setcolreg &&
+				!info->fbops->fb_setcmap)) {
+		rc = -EINVAL;
+		goto out1;
+	}
 	rc = fb_set_cmap(&umap, info);
+out1:
+	unlock_fb_info(info);
+out:
 	fb_dealloc_cmap(&umap);
 	return rc;
 }
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 756efeb91ab..cfd9dce1ce0 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1013,132 +1013,139 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
 	struct fb_var_screeninfo var;
 	struct fb_fix_screeninfo fix;
 	struct fb_con2fbmap con2fb;
+	struct fb_cmap cmap_from;
 	struct fb_cmap_user cmap;
 	struct fb_event event;
 	void __user *argp = (void __user *)arg;
 	long ret = 0;
 
-	fb = info->fbops;
-	if (!fb)
-		return -ENODEV;
-
 	switch (cmd) {
 	case FBIOGET_VSCREENINFO:
-		ret = copy_to_user(argp, &info->var,
-				    sizeof(var)) ? -EFAULT : 0;
+		if (!lock_fb_info(info))
+			return -ENODEV;
+		var = info->var;
+		unlock_fb_info(info);
+
+		ret = copy_to_user(argp, &var, sizeof(var)) ? -EFAULT : 0;
 		break;
 	case FBIOPUT_VSCREENINFO:
-		if (copy_from_user(&var, argp, sizeof(var))) {
-			ret =  -EFAULT;
-			break;
-		}
+		if (copy_from_user(&var, argp, sizeof(var)))
+			return -EFAULT;
+		if (!lock_fb_info(info))
+			return -ENODEV;
 		acquire_console_sem();
 		info->flags |= FBINFO_MISC_USEREVENT;
 		ret = fb_set_var(info, &var);
 		info->flags &= ~FBINFO_MISC_USEREVENT;
 		release_console_sem();
-		if (ret == 0 && copy_to_user(argp, &var, sizeof(var)))
+		unlock_fb_info(info);
+		if (!ret && copy_to_user(argp, &var, sizeof(var)))
 			ret = -EFAULT;
 		break;
 	case FBIOGET_FSCREENINFO:
-		ret = copy_to_user(argp, &info->fix,
-				    sizeof(fix)) ? -EFAULT : 0;
+		if (!lock_fb_info(info))
+			return -ENODEV;
+		fix = info->fix;
+		unlock_fb_info(info);
+
+		ret = copy_to_user(argp, &fix, sizeof(fix)) ? -EFAULT : 0;
 		break;
 	case FBIOPUTCMAP:
 		if (copy_from_user(&cmap, argp, sizeof(cmap)))
-			ret = -EFAULT;
-		else
-			ret = fb_set_user_cmap(&cmap, info);
+			return -EFAULT;
+		ret = fb_set_user_cmap(&cmap, info);
 		break;
 	case FBIOGETCMAP:
 		if (copy_from_user(&cmap, argp, sizeof(cmap)))
-			ret = -EFAULT;
-		else
-			ret = fb_cmap_to_user(&info->cmap, &cmap);
+			return -EFAULT;
+		if (!lock_fb_info(info))
+			return -ENODEV;
+		cmap_from = info->cmap;
+		unlock_fb_info(info);
+		ret = fb_cmap_to_user(&cmap_from, &cmap);
 		break;
 	case FBIOPAN_DISPLAY:
-		if (copy_from_user(&var, argp, sizeof(var))) {
-			ret = -EFAULT;
-			break;
-		}
+		if (copy_from_user(&var, argp, sizeof(var)))
+			return -EFAULT;
+		if (!lock_fb_info(info))
+			return -ENODEV;
 		acquire_console_sem();
 		ret = fb_pan_display(info, &var);
 		release_console_sem();
+		unlock_fb_info(info);
 		if (ret == 0 && copy_to_user(argp, &var, sizeof(var)))
-			ret = -EFAULT;
+			return -EFAULT;
 		break;
 	case FBIO_CURSOR:
 		ret = -EINVAL;
 		break;
 	case FBIOGET_CON2FBMAP:
 		if (copy_from_user(&con2fb, argp, sizeof(con2fb)))
-			ret = -EFAULT;
-		else if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES)
-			ret = -EINVAL;
-		else {
-			con2fb.framebuffer = -1;
-			event.info = info;
-			event.data = &con2fb;
-			fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP,
-								&event);
-			ret = copy_to_user(argp, &con2fb,
-				    sizeof(con2fb)) ? -EFAULT : 0;
-		}
+			return -EFAULT;
+		if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES)
+			return -EINVAL;
+		con2fb.framebuffer = -1;
+		event.data = &con2fb;
+
+		if (!lock_fb_info(info))
+			return -ENODEV;
+		event.info = info;
+		fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP, &event);
+		unlock_fb_info(info);
+
+		ret = copy_to_user(argp, &con2fb, sizeof(con2fb)) ? -EFAULT : 0;
 		break;
 	case FBIOPUT_CON2FBMAP:
-		if (copy_from_user(&con2fb, argp, sizeof(con2fb))) {
-			ret = -EFAULT;
-			break;
-		}
-		if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES) {
-			ret = -EINVAL;
-			break;
-		}
-		if (con2fb.framebuffer < 0 || con2fb.framebuffer >= FB_MAX) {
-			ret = -EINVAL;
-			break;
-		}
+		if (copy_from_user(&con2fb, argp, sizeof(con2fb)))
+			return -EFAULT;
+		if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES)
+			return -EINVAL;
+		if (con2fb.framebuffer < 0 || con2fb.framebuffer >= FB_MAX)
+			return -EINVAL;
 		if (!registered_fb[con2fb.framebuffer])
 			request_module("fb%d", con2fb.framebuffer);
 		if (!registered_fb[con2fb.framebuffer]) {
 			ret = -EINVAL;
 			break;
 		}
-		event.info = info;
 		event.data = &con2fb;
+		if (!lock_fb_info(info))
+			return -ENODEV;
+		event.info = info;
 		ret = fb_notifier_call_chain(FB_EVENT_SET_CONSOLE_MAP,
 					      &event);
+		unlock_fb_info(info);
 		break;
 	case FBIOBLANK:
+		if (!lock_fb_info(info))
+			return -ENODEV;
 		acquire_console_sem();
 		info->flags |= FBINFO_MISC_USEREVENT;
 		ret = fb_blank(info, arg);
 		info->flags &= ~FBINFO_MISC_USEREVENT;
 		release_console_sem();
-		break;;
+		unlock_fb_info(info);
+		break;
 	default:
-		if (fb->fb_ioctl == NULL)
-			ret = -ENOTTY;
-		else
+		if (!lock_fb_info(info))
+			return -ENODEV;
+		fb = info->fbops;
+		if (fb->fb_ioctl)
 			ret = fb->fb_ioctl(info, cmd, arg);
+		else
+			ret = -ENOTTY;
+		unlock_fb_info(info);
 	}
 	return ret;
 }
 
 static long fb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-__acquires(&info->lock)
-__releases(&info->lock)
 {
 	struct inode *inode = file->f_path.dentry->d_inode;
 	int fbidx = iminor(inode);
-	struct fb_info *info;
-	long ret;
+	struct fb_info *info = registered_fb[fbidx];
 
-	info = registered_fb[fbidx];
-	mutex_lock(&info->lock);
-	ret = do_fb_ioctl(info, cmd, arg);
-	mutex_unlock(&info->lock);
-	return ret;
+	return do_fb_ioctl(info, cmd, arg);
 }
 
 #ifdef CONFIG_COMPAT
@@ -1257,8 +1264,6 @@ static int fb_get_fscreeninfo(struct fb_info *info, unsigned int cmd,
 
 static long fb_compat_ioctl(struct file *file, unsigned int cmd,
 			    unsigned long arg)
-__acquires(&info->lock)
-__releases(&info->lock)
 {
 	struct inode *inode = file->f_path.dentry->d_inode;
 	int fbidx = iminor(inode);
@@ -1266,7 +1271,6 @@ __releases(&info->lock)
 	struct fb_ops *fb = info->fbops;
 	long ret = -ENOIOCTLCMD;
 
-	mutex_lock(&info->lock);
 	switch(cmd) {
 	case FBIOGET_VSCREENINFO:
 	case FBIOPUT_VSCREENINFO:
@@ -1292,7 +1296,6 @@ __releases(&info->lock)
 			ret = fb->fb_compat_ioctl(info, cmd, arg);
 		break;
 	}
-	mutex_unlock(&info->lock);
 	return ret;
 }
 #endif
diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c
index 7787c3322ff..9dd55e5324a 100644
--- a/drivers/video/i810/i810-i2c.c
+++ b/drivers/video/i810/i810-i2c.c
@@ -90,7 +90,6 @@ static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name)
         chan->adapter.owner             = THIS_MODULE;
         chan->adapter.algo_data         = &chan->algo;
         chan->adapter.dev.parent        = &chan->par->dev->dev;
-	chan->adapter.id                = I2C_HW_B_I810;
 	chan->algo.setsda               = i810i2c_setsda;
 	chan->algo.setscl               = i810i2c_setscl;
 	chan->algo.getsda               = i810i2c_getsda;
diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c
index 5d896b81f4e..b3065492bb2 100644
--- a/drivers/video/intelfb/intelfb_i2c.c
+++ b/drivers/video/intelfb/intelfb_i2c.c
@@ -111,7 +111,6 @@ static int intelfb_setup_i2c_bus(struct intelfb_info *dinfo,
 		 "intelfb %s", name);
 	chan->adapter.class		= class;
 	chan->adapter.owner		= THIS_MODULE;
-	chan->adapter.id		= I2C_HW_B_INTELFB;
 	chan->adapter.algo_data		= &chan->algo;
 	chan->adapter.dev.parent	= &chan->dinfo->pdev->dev;
 	chan->algo.setsda		= intelfb_gpio_setsda;
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
new file mode 100644
index 00000000000..8a75d05f433
--- /dev/null
+++ b/drivers/video/mx3fb.c
@@ -0,0 +1,1555 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/console.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+
+#include <mach/hardware.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define MX3FB_NAME             "mx3_sdc_fb"
+
+#define MX3FB_REG_OFFSET       0xB4
+
+/* SDC Registers */
+#define SDC_COM_CONF           (0xB4 - MX3FB_REG_OFFSET)
+#define SDC_GW_CTRL            (0xB8 - MX3FB_REG_OFFSET)
+#define SDC_FG_POS             (0xBC - MX3FB_REG_OFFSET)
+#define SDC_BG_POS             (0xC0 - MX3FB_REG_OFFSET)
+#define SDC_CUR_POS            (0xC4 - MX3FB_REG_OFFSET)
+#define SDC_PWM_CTRL           (0xC8 - MX3FB_REG_OFFSET)
+#define SDC_CUR_MAP            (0xCC - MX3FB_REG_OFFSET)
+#define SDC_HOR_CONF           (0xD0 - MX3FB_REG_OFFSET)
+#define SDC_VER_CONF           (0xD4 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_1       (0xD8 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_2       (0xDC - MX3FB_REG_OFFSET)
+
+/* Register bits */
+#define SDC_COM_TFT_COLOR      0x00000001UL
+#define SDC_COM_FG_EN          0x00000010UL
+#define SDC_COM_GWSEL          0x00000020UL
+#define SDC_COM_GLB_A          0x00000040UL
+#define SDC_COM_KEY_COLOR_G    0x00000080UL
+#define SDC_COM_BG_EN          0x00000200UL
+#define SDC_COM_SHARP          0x00001000UL
+
+#define SDC_V_SYNC_WIDTH_L     0x00000001UL
+
+/* Display Interface registers */
+#define DI_DISP_IF_CONF                (0x0124 - MX3FB_REG_OFFSET)
+#define DI_DISP_SIG_POL                (0x0128 - MX3FB_REG_OFFSET)
+#define DI_SER_DISP1_CONF      (0x012C - MX3FB_REG_OFFSET)
+#define DI_SER_DISP2_CONF      (0x0130 - MX3FB_REG_OFFSET)
+#define DI_HSP_CLK_PER         (0x0134 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_1   (0x0138 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_2   (0x013C - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_3   (0x0140 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_1   (0x0144 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_2   (0x0148 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_3   (0x014C - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_1   (0x0150 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_2   (0x0154 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_3   (0x0158 - MX3FB_REG_OFFSET)
+#define DI_DISP3_TIME_CONF     (0x015C - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB0_MAP       (0x0160 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB1_MAP       (0x0164 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB2_MAP       (0x0168 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB0_MAP       (0x016C - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB1_MAP       (0x0170 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB2_MAP       (0x0174 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB0_MAP       (0x0178 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB1_MAP       (0x017C - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB2_MAP       (0x0180 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB0_MAP       (0x0184 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB1_MAP       (0x0188 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB2_MAP       (0x018C - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB0_MAP       (0x0190 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB1_MAP       (0x0194 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB2_MAP       (0x0198 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB0_MAP       (0x019C - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB1_MAP       (0x01A0 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB2_MAP       (0x01A4 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B0_MAP                (0x01A8 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B1_MAP                (0x01AC - MX3FB_REG_OFFSET)
+#define DI_DISP3_B2_MAP                (0x01B0 - MX3FB_REG_OFFSET)
+#define DI_DISP_ACC_CC         (0x01B4 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_CONF       (0x01B8 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_DATA       (0x01BC - MX3FB_REG_OFFSET)
+
+/* DI_DISP_SIG_POL bits */
+#define DI_D3_VSYNC_POL_SHIFT          28
+#define DI_D3_HSYNC_POL_SHIFT          27
+#define DI_D3_DRDY_SHARP_POL_SHIFT     26
+#define DI_D3_CLK_POL_SHIFT            25
+#define DI_D3_DATA_POL_SHIFT           24
+
+/* DI_DISP_IF_CONF bits */
+#define DI_D3_CLK_IDLE_SHIFT           26
+#define DI_D3_CLK_SEL_SHIFT            25
+#define DI_D3_DATAMSK_SHIFT            24
+
+enum ipu_panel {
+       IPU_PANEL_SHARP_TFT,
+       IPU_PANEL_TFT,
+};
+
+struct ipu_di_signal_cfg {
+       unsigned datamask_en:1;
+       unsigned clksel_en:1;
+       unsigned clkidle_en:1;
+       unsigned data_pol:1;    /* true = inverted */
+       unsigned clk_pol:1;     /* true = rising edge */
+       unsigned enable_pol:1;
+       unsigned Hsync_pol:1;   /* true = active high */
+       unsigned Vsync_pol:1;
+};
+
+static const struct fb_videomode mx3fb_modedb[] = {
+       {
+               /* 240x320 @ 60 Hz */
+               .name           = "Sharp-QVGA",
+               .refresh        = 60,
+               .xres           = 240,
+               .yres           = 320,
+               .pixclock       = 185925,
+               .left_margin    = 9,
+               .right_margin   = 16,
+               .upper_margin   = 7,
+               .lower_margin   = 9,
+               .hsync_len      = 1,
+               .vsync_len      = 1,
+               .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+                                 FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+                                 FB_SYNC_CLK_IDLE_EN,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* 240x33 @ 60 Hz */
+               .name           = "Sharp-CLI",
+               .refresh        = 60,
+               .xres           = 240,
+               .yres           = 33,
+               .pixclock       = 185925,
+               .left_margin    = 9,
+               .right_margin   = 16,
+               .upper_margin   = 7,
+               .lower_margin   = 9 + 287,
+               .hsync_len      = 1,
+               .vsync_len      = 1,
+               .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+                                 FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+                                 FB_SYNC_CLK_IDLE_EN,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* 640x480 @ 60 Hz */
+               .name           = "NEC-VGA",
+               .refresh        = 60,
+               .xres           = 640,
+               .yres           = 480,
+               .pixclock       = 38255,
+               .left_margin    = 144,
+               .right_margin   = 0,
+               .upper_margin   = 34,
+               .lower_margin   = 40,
+               .hsync_len      = 1,
+               .vsync_len      = 1,
+               .sync           = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* NTSC TV output */
+               .name           = "TV-NTSC",
+               .refresh        = 60,
+               .xres           = 640,
+               .yres           = 480,
+               .pixclock       = 37538,
+               .left_margin    = 38,
+               .right_margin   = 858 - 640 - 38 - 3,
+               .upper_margin   = 36,
+               .lower_margin   = 518 - 480 - 36 - 1,
+               .hsync_len      = 3,
+               .vsync_len      = 1,
+               .sync           = 0,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* PAL TV output */
+               .name           = "TV-PAL",
+               .refresh        = 50,
+               .xres           = 640,
+               .yres           = 480,
+               .pixclock       = 37538,
+               .left_margin    = 38,
+               .right_margin   = 960 - 640 - 38 - 32,
+               .upper_margin   = 32,
+               .lower_margin   = 555 - 480 - 32 - 3,
+               .hsync_len      = 32,
+               .vsync_len      = 3,
+               .sync           = 0,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* TV output VGA mode, 640x480 @ 65 Hz */
+               .name           = "TV-VGA",
+               .refresh        = 60,
+               .xres           = 640,
+               .yres           = 480,
+               .pixclock       = 40574,
+               .left_margin    = 35,
+               .right_margin   = 45,
+               .upper_margin   = 9,
+               .lower_margin   = 1,
+               .hsync_len      = 46,
+               .vsync_len      = 5,
+               .sync           = 0,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       },
+};
+
+struct mx3fb_data {
+       struct fb_info          *fbi;
+       int                     backlight_level;
+       void __iomem            *reg_base;
+       spinlock_t              lock;
+       struct device           *dev;
+
+       uint32_t                h_start_width;
+       uint32_t                v_start_width;
+};
+
+struct dma_chan_request {
+       struct mx3fb_data       *mx3fb;
+       enum ipu_channel        id;
+};
+
+/* MX3 specific framebuffer information. */
+struct mx3fb_info {
+       int                             blank;
+       enum ipu_channel                ipu_ch;
+       uint32_t                        cur_ipu_buf;
+
+       u32                             pseudo_palette[16];
+
+       struct completion               flip_cmpl;
+       struct mutex                    mutex;  /* Protects fb-ops */
+       struct mx3fb_data               *mx3fb;
+       struct idmac_channel            *idmac_channel;
+       struct dma_async_tx_descriptor  *txd;
+       dma_cookie_t                    cookie;
+       struct scatterlist              sg[2];
+
+       u32                             sync;   /* preserve var->sync flags */
+};
+
+static void mx3fb_dma_done(void *);
+
+/* Used fb-mode and bpp. Can be set on kernel command line, therefore file-static. */
+static const char *fb_mode;
+static unsigned long default_bpp = 16;
+
+static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg)
+{
+       return __raw_readl(mx3fb->reg_base + reg);
+}
+
+static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg)
+{
+       __raw_writel(value, mx3fb->reg_base + reg);
+}
+
+static const uint32_t di_mappings[] = {
+       0x1600AAAA, 0x00E05555, 0x00070000, 3,  /* RGB888 */
+       0x0005000F, 0x000B000F, 0x0011000F, 1,  /* RGB666 */
+       0x0011000F, 0x000B000F, 0x0005000F, 1,  /* BGR666 */
+       0x0004003F, 0x000A000F, 0x000F003F, 1   /* RGB565 */
+};
+
+static void sdc_fb_init(struct mx3fb_info *fbi)
+{
+       struct mx3fb_data *mx3fb = fbi->mx3fb;
+       uint32_t reg;
+
+       reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+
+       mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF);
+}
+
+/* Returns enabled flag before uninit */
+static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi)
+{
+       struct mx3fb_data *mx3fb = fbi->mx3fb;
+       uint32_t reg;
+
+       reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+
+       mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF);
+
+       return reg & SDC_COM_BG_EN;
+}
+
+static void sdc_enable_channel(struct mx3fb_info *mx3_fbi)
+{
+       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+       struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+       struct dma_chan *dma_chan = &ichan->dma_chan;
+       unsigned long flags;
+       dma_cookie_t cookie;
+
+       dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
+               to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
+
+       /* This enables the channel */
+       if (mx3_fbi->cookie < 0) {
+               mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan,
+                     &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+               if (!mx3_fbi->txd) {
+                       dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n",
+                               dma_chan->chan_id);
+                       return;
+               }
+
+               mx3_fbi->txd->callback_param    = mx3_fbi->txd;
+               mx3_fbi->txd->callback          = mx3fb_dma_done;
+
+               cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd);
+               dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__,
+                      mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+       } else {
+               if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) {
+                       dev_err(mx3fb->dev, "Cannot enable channel %d\n",
+                               dma_chan->chan_id);
+                       return;
+               }
+
+               /* Just re-activate the same buffer */
+               dma_async_issue_pending(dma_chan);
+               cookie = mx3_fbi->cookie;
+               dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__,
+                      mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+       }
+
+       if (cookie >= 0) {
+               spin_lock_irqsave(&mx3fb->lock, flags);
+               sdc_fb_init(mx3_fbi);
+               mx3_fbi->cookie = cookie;
+               spin_unlock_irqrestore(&mx3fb->lock, flags);
+       }
+
+       /*
+        * Attention! Without this msleep the channel keeps generating
+        * interrupts. Next sdc_set_brightness() is going to be called
+        * from mx3fb_blank().
+        */
+       msleep(2);
+}
+
+static void sdc_disable_channel(struct mx3fb_info *mx3_fbi)
+{
+       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+       uint32_t enabled;
+       unsigned long flags;
+
+       spin_lock_irqsave(&mx3fb->lock, flags);
+
+       enabled = sdc_fb_uninit(mx3_fbi);
+
+       spin_unlock_irqrestore(&mx3fb->lock, flags);
+
+       mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan);
+       mx3_fbi->txd = NULL;
+       mx3_fbi->cookie = -EINVAL;
+}
+
+/**
+ * sdc_set_window_pos() - set window position of the respective plane.
+ * @mx3fb:     mx3fb context.
+ * @channel:   IPU DMAC channel ID.
+ * @x_pos:     X coordinate relative to the top left corner to place window at.
+ * @y_pos:     Y coordinate relative to the top left corner to place window at.
+ * @return:    0 on success or negative error code on failure.
+ */
+static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel,
+                             int16_t x_pos, int16_t y_pos)
+{
+       x_pos += mx3fb->h_start_width;
+       y_pos += mx3fb->v_start_width;
+
+       if (channel != IDMAC_SDC_0)
+               return -EINVAL;
+
+       mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS);
+       return 0;
+}
+
+/**
+ * sdc_init_panel() - initialize a synchronous LCD panel.
+ * @mx3fb:             mx3fb context.
+ * @panel:             panel type.
+ * @pixel_clk:         desired pixel clock frequency in Hz.
+ * @width:             width of panel in pixels.
+ * @height:            height of panel in pixels.
+ * @pixel_fmt:         pixel format of buffer as FOURCC ASCII code.
+ * @h_start_width:     number of pixel clocks between the HSYNC signal pulse
+ *                     and the start of valid data.
+ * @h_sync_width:      width of the HSYNC signal in units of pixel clocks.
+ * @h_end_width:       number of pixel clocks between the end of valid data
+ *                     and the HSYNC signal for next line.
+ * @v_start_width:     number of lines between the VSYNC signal pulse and the
+ *                     start of valid data.
+ * @v_sync_width:      width of the VSYNC signal in units of lines
+ * @v_end_width:       number of lines between the end of valid data and the
+ *                     VSYNC signal for next frame.
+ * @sig:               bitfield of signal polarities for LCD interface.
+ * @return:            0 on success or negative error code on failure.
+ */
+static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel,
+                         uint32_t pixel_clk,
+                         uint16_t width, uint16_t height,
+                         enum pixel_fmt pixel_fmt,
+                         uint16_t h_start_width, uint16_t h_sync_width,
+                         uint16_t h_end_width, uint16_t v_start_width,
+                         uint16_t v_sync_width, uint16_t v_end_width,
+                         struct ipu_di_signal_cfg sig)
+{
+       unsigned long lock_flags;
+       uint32_t reg;
+       uint32_t old_conf;
+       uint32_t div;
+       struct clk *ipu_clk;
+
+       dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height);
+
+       if (v_sync_width == 0 || h_sync_width == 0)
+               return -EINVAL;
+
+       /* Init panel size and blanking periods */
+       reg = ((uint32_t) (h_sync_width - 1) << 26) |
+               ((uint32_t) (width + h_start_width + h_end_width - 1) << 16);
+       mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF);
+
+#ifdef DEBUG
+       printk(KERN_CONT " hor_conf %x,", reg);
+#endif
+
+       reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L |
+           ((uint32_t) (height + v_start_width + v_end_width - 1) << 16);
+       mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF);
+
+#ifdef DEBUG
+       printk(KERN_CONT " ver_conf %x\n", reg);
+#endif
+
+       mx3fb->h_start_width = h_start_width;
+       mx3fb->v_start_width = v_start_width;
+
+       switch (panel) {
+       case IPU_PANEL_SHARP_TFT:
+               mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1);
+               mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2);
+               mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
+               break;
+       case IPU_PANEL_TFT:
+               mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF);
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       /* Init clocking */
+
+       /*
+        * Calculate divider: fractional part is 4 bits so simply multiple by
+        * 24 to get fractional part, as long as we stay under ~250MHz and on
+        * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
+        */
+       dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk);
+
+       ipu_clk = clk_get(mx3fb->dev, "ipu_clk");
+       div = clk_get_rate(ipu_clk) * 16 / pixel_clk;
+       clk_put(ipu_clk);
+
+       if (div < 0x40) {       /* Divider less than 4 */
+               dev_dbg(mx3fb->dev,
+                       "InitPanel() - Pixel clock divider less than 4\n");
+               div = 0x40;
+       }
+
+       spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+       /*
+        * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits
+        * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing
+        * debug. DISP3_IF_CLK_UP_WR is 0
+        */
+       mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF);
+
+       /* DI settings */
+       old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF;
+       old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT |
+           sig.clksel_en << DI_D3_CLK_SEL_SHIFT |
+           sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT;
+       mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF);
+
+       old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF;
+       old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT |
+           sig.clk_pol << DI_D3_CLK_POL_SHIFT |
+           sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
+           sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
+           sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
+       mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL);
+
+       switch (pixel_fmt) {
+       case IPU_PIX_FMT_RGB24:
+               mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP);
+               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+                            ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC);
+               break;
+       case IPU_PIX_FMT_RGB666:
+               mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP);
+               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+                            ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC);
+               break;
+       case IPU_PIX_FMT_BGR666:
+               mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP);
+               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+                            ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC);
+               break;
+       default:
+               mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP);
+               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+                            ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC);
+               break;
+       }
+
+       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+       dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n",
+               mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF));
+       dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n",
+               mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL));
+       dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n",
+               mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF));
+
+       return 0;
+}
+
+/**
+ * sdc_set_color_key() - set the transparent color key for SDC graphic plane.
+ * @mx3fb:     mx3fb context.
+ * @channel:   IPU DMAC channel ID.
+ * @enable:    boolean to enable or disable color keyl.
+ * @color_key: 24-bit RGB color to use as transparent color key.
+ * @return:    0 on success or negative error code on failure.
+ */
+static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel,
+                            bool enable, uint32_t color_key)
+{
+       uint32_t reg, sdc_conf;
+       unsigned long lock_flags;
+
+       spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+       sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+       if (channel == IDMAC_SDC_0)
+               sdc_conf &= ~SDC_COM_GWSEL;
+       else
+               sdc_conf |= SDC_COM_GWSEL;
+
+       if (enable) {
+               reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L;
+               mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL),
+                            SDC_GW_CTRL);
+
+               sdc_conf |= SDC_COM_KEY_COLOR_G;
+       } else {
+               sdc_conf &= ~SDC_COM_KEY_COLOR_G;
+       }
+       mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF);
+
+       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+       return 0;
+}
+
+/**
+ * sdc_set_global_alpha() - set global alpha blending modes.
+ * @mx3fb:     mx3fb context.
+ * @enable:    boolean to enable or disable global alpha blending. If disabled,
+ *             per pixel blending is used.
+ * @alpha:     global alpha value.
+ * @return:    0 on success or negative error code on failure.
+ */
+static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha)
+{
+       uint32_t reg;
+       unsigned long lock_flags;
+
+       spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+       if (enable) {
+               reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL;
+               mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL);
+
+               reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+               mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF);
+       } else {
+               reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+               mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF);
+       }
+
+       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+       return 0;
+}
+
+static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value)
+{
+       /* This might be board-specific */
+       mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL);
+       return;
+}
+
+static uint32_t bpp_to_pixfmt(int bpp)
+{
+       uint32_t pixfmt = 0;
+       switch (bpp) {
+       case 24:
+               pixfmt = IPU_PIX_FMT_BGR24;
+               break;
+       case 32:
+               pixfmt = IPU_PIX_FMT_BGR32;
+               break;
+       case 16:
+               pixfmt = IPU_PIX_FMT_RGB565;
+               break;
+       }
+       return pixfmt;
+}
+
+static int mx3fb_blank(int blank, struct fb_info *fbi);
+static int mx3fb_map_video_memory(struct fb_info *fbi);
+static int mx3fb_unmap_video_memory(struct fb_info *fbi);
+
+/**
+ * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings.
+ * @info:      framebuffer information pointer
+ * @return:    0 on success or negative error code on failure.
+ */
+static int mx3fb_set_fix(struct fb_info *fbi)
+{
+       struct fb_fix_screeninfo *fix = &fbi->fix;
+       struct fb_var_screeninfo *var = &fbi->var;
+
+       strncpy(fix->id, "DISP3 BG", 8);
+
+       fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+
+       fix->type = FB_TYPE_PACKED_PIXELS;
+       fix->accel = FB_ACCEL_NONE;
+       fix->visual = FB_VISUAL_TRUECOLOR;
+       fix->xpanstep = 1;
+       fix->ypanstep = 1;
+
+       return 0;
+}
+
+static void mx3fb_dma_done(void *arg)
+{
+       struct idmac_tx_desc *tx_desc = to_tx_desc(arg);
+       struct dma_chan *chan = tx_desc->txd.chan;
+       struct idmac_channel *ichannel = to_idmac_chan(chan);
+       struct mx3fb_data *mx3fb = ichannel->client;
+       struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
+
+       dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
+
+       /* We only need one interrupt, it will be re-enabled as needed */
+       disable_irq(ichannel->eof_irq);
+
+       complete(&mx3_fbi->flip_cmpl);
+}
+
+/**
+ * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
+ * @fbi:       framebuffer information pointer.
+ * @return:    0 on success or negative error code on failure.
+ */
+static int mx3fb_set_par(struct fb_info *fbi)
+{
+       u32 mem_len;
+       struct ipu_di_signal_cfg sig_cfg;
+       enum ipu_panel mode = IPU_PANEL_TFT;
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+       struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+       struct idmac_video_param *video = &ichan->params.video;
+       struct scatterlist *sg = mx3_fbi->sg;
+       size_t screen_size;
+
+       dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
+
+       mutex_lock(&mx3_fbi->mutex);
+
+       /* Total cleanup */
+       if (mx3_fbi->txd)
+               sdc_disable_channel(mx3_fbi);
+
+       mx3fb_set_fix(fbi);
+
+       mem_len = fbi->var.yres_virtual * fbi->fix.line_length;
+       if (mem_len > fbi->fix.smem_len) {
+               if (fbi->fix.smem_start)
+                       mx3fb_unmap_video_memory(fbi);
+
+               fbi->fix.smem_len = mem_len;
+               if (mx3fb_map_video_memory(fbi) < 0) {
+                       mutex_unlock(&mx3_fbi->mutex);
+                       return -ENOMEM;
+               }
+       }
+
+       screen_size = fbi->fix.line_length * fbi->var.yres;
+
+       sg_init_table(&sg[0], 1);
+       sg_init_table(&sg[1], 1);
+
+       sg_dma_address(&sg[0])  = fbi->fix.smem_start;
+       sg_set_page(&sg[0], virt_to_page(fbi->screen_base),
+                   fbi->fix.smem_len,
+                   offset_in_page(fbi->screen_base));
+
+       if (mx3_fbi->ipu_ch == IDMAC_SDC_0) {
+               memset(&sig_cfg, 0, sizeof(sig_cfg));
+               if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
+                       sig_cfg.Hsync_pol = true;
+               if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
+                       sig_cfg.Vsync_pol = true;
+               if (fbi->var.sync & FB_SYNC_CLK_INVERT)
+                       sig_cfg.clk_pol = true;
+               if (fbi->var.sync & FB_SYNC_DATA_INVERT)
+                       sig_cfg.data_pol = true;
+               if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
+                       sig_cfg.enable_pol = true;
+               if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
+                       sig_cfg.clkidle_en = true;
+               if (fbi->var.sync & FB_SYNC_CLK_SEL_EN)
+                       sig_cfg.clksel_en = true;
+               if (fbi->var.sync & FB_SYNC_SHARP_MODE)
+                       mode = IPU_PANEL_SHARP_TFT;
+
+               dev_dbg(fbi->device, "pixclock = %ul Hz\n",
+                       (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL));
+
+               if (sdc_init_panel(mx3fb, mode,
+                                  (PICOS2KHZ(fbi->var.pixclock)) * 1000UL,
+                                  fbi->var.xres, fbi->var.yres,
+                                  (fbi->var.sync & FB_SYNC_SWAP_RGB) ?
+                                  IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666,
+                                  fbi->var.left_margin,
+                                  fbi->var.hsync_len,
+                                  fbi->var.right_margin +
+                                  fbi->var.hsync_len,
+                                  fbi->var.upper_margin,
+                                  fbi->var.vsync_len,
+                                  fbi->var.lower_margin +
+                                  fbi->var.vsync_len, sig_cfg) != 0) {
+                       mutex_unlock(&mx3_fbi->mutex);
+                       dev_err(fbi->device,
+                               "mx3fb: Error initializing panel.\n");
+                       return -EINVAL;
+               }
+       }
+
+       sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0);
+
+       mx3_fbi->cur_ipu_buf    = 0;
+
+       video->out_pixel_fmt    = bpp_to_pixfmt(fbi->var.bits_per_pixel);
+       video->out_width        = fbi->var.xres;
+       video->out_height       = fbi->var.yres;
+       video->out_stride       = fbi->var.xres_virtual;
+
+       if (mx3_fbi->blank == FB_BLANK_UNBLANK)
+               sdc_enable_channel(mx3_fbi);
+
+       mutex_unlock(&mx3_fbi->mutex);
+
+       return 0;
+}
+
+/**
+ * mx3fb_check_var() - check and adjust framebuffer variable parameters.
+ * @var:       framebuffer variable parameters
+ * @fbi:       framebuffer information pointer
+ */
+static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
+{
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       u32 vtotal;
+       u32 htotal;
+
+       dev_dbg(fbi->device, "%s\n", __func__);
+
+       if (var->xres_virtual < var->xres)
+               var->xres_virtual = var->xres;
+       if (var->yres_virtual < var->yres)
+               var->yres_virtual = var->yres;
+
+       if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
+           (var->bits_per_pixel != 16))
+               var->bits_per_pixel = default_bpp;
+
+       switch (var->bits_per_pixel) {
+       case 16:
+               var->red.length = 5;
+               var->red.offset = 11;
+               var->red.msb_right = 0;
+
+               var->green.length = 6;
+               var->green.offset = 5;
+               var->green.msb_right = 0;
+
+               var->blue.length = 5;
+               var->blue.offset = 0;
+               var->blue.msb_right = 0;
+
+               var->transp.length = 0;
+               var->transp.offset = 0;
+               var->transp.msb_right = 0;
+               break;
+       case 24:
+               var->red.length = 8;
+               var->red.offset = 16;
+               var->red.msb_right = 0;
+
+               var->green.length = 8;
+               var->green.offset = 8;
+               var->green.msb_right = 0;
+
+               var->blue.length = 8;
+               var->blue.offset = 0;
+               var->blue.msb_right = 0;
+
+               var->transp.length = 0;
+               var->transp.offset = 0;
+               var->transp.msb_right = 0;
+               break;
+       case 32:
+               var->red.length = 8;
+               var->red.offset = 16;
+               var->red.msb_right = 0;
+
+               var->green.length = 8;
+               var->green.offset = 8;
+               var->green.msb_right = 0;
+
+               var->blue.length = 8;
+               var->blue.offset = 0;
+               var->blue.msb_right = 0;
+
+               var->transp.length = 8;
+               var->transp.offset = 24;
+               var->transp.msb_right = 0;
+               break;
+       }
+
+       if (var->pixclock < 1000) {
+               htotal = var->xres + var->right_margin + var->hsync_len +
+                   var->left_margin;
+               vtotal = var->yres + var->lower_margin + var->vsync_len +
+                   var->upper_margin;
+               var->pixclock = (vtotal * htotal * 6UL) / 100UL;
+               var->pixclock = KHZ2PICOS(var->pixclock);
+               dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n",
+                       var->pixclock);
+       }
+
+       var->height = -1;
+       var->width = -1;
+       var->grayscale = 0;
+
+       /* Preserve sync flags */
+       var->sync |= mx3_fbi->sync;
+       mx3_fbi->sync |= var->sync;
+
+       return 0;
+}
+
+static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf)
+{
+       chan &= 0xffff;
+       chan >>= 16 - bf->length;
+       return chan << bf->offset;
+}
+
+static int mx3fb_setcolreg(unsigned int regno, unsigned int red,
+                          unsigned int green, unsigned int blue,
+                          unsigned int trans, struct fb_info *fbi)
+{
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       u32 val;
+       int ret = 1;
+
+       dev_dbg(fbi->device, "%s\n", __func__);
+
+       mutex_lock(&mx3_fbi->mutex);
+       /*
+        * If greyscale is true, then we convert the RGB value
+        * to greyscale no matter what visual we are using.
+        */
+       if (fbi->var.grayscale)
+               red = green = blue = (19595 * red + 38470 * green +
+                                     7471 * blue) >> 16;
+       switch (fbi->fix.visual) {
+       case FB_VISUAL_TRUECOLOR:
+               /*
+                * 16-bit True Colour.  We encode the RGB value
+                * according to the RGB bitfield information.
+                */
+               if (regno < 16) {
+                       u32 *pal = fbi->pseudo_palette;
+
+                       val = chan_to_field(red, &fbi->var.red);
+                       val |= chan_to_field(green, &fbi->var.green);
+                       val |= chan_to_field(blue, &fbi->var.blue);
+
+                       pal[regno] = val;
+
+                       ret = 0;
+               }
+               break;
+
+       case FB_VISUAL_STATIC_PSEUDOCOLOR:
+       case FB_VISUAL_PSEUDOCOLOR:
+               break;
+       }
+       mutex_unlock(&mx3_fbi->mutex);
+
+       return ret;
+}
+
+/**
+ * mx3fb_blank() - blank the display.
+ */
+static int mx3fb_blank(int blank, struct fb_info *fbi)
+{
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+
+       dev_dbg(fbi->device, "%s\n", __func__);
+
+       dev_dbg(fbi->device, "blank = %d\n", blank);
+
+       if (mx3_fbi->blank == blank)
+               return 0;
+
+       mutex_lock(&mx3_fbi->mutex);
+       mx3_fbi->blank = blank;
+
+       switch (blank) {
+       case FB_BLANK_POWERDOWN:
+       case FB_BLANK_VSYNC_SUSPEND:
+       case FB_BLANK_HSYNC_SUSPEND:
+       case FB_BLANK_NORMAL:
+               sdc_disable_channel(mx3_fbi);
+               sdc_set_brightness(mx3fb, 0);
+               break;
+       case FB_BLANK_UNBLANK:
+               sdc_enable_channel(mx3_fbi);
+               sdc_set_brightness(mx3fb, mx3fb->backlight_level);
+               break;
+       }
+       mutex_unlock(&mx3_fbi->mutex);
+
+       return 0;
+}
+
+/**
+ * mx3fb_pan_display() - pan or wrap the display
+ * @var:       variable screen buffer information.
+ * @info:      framebuffer information pointer.
+ *
+ * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag
+ */
+static int mx3fb_pan_display(struct fb_var_screeninfo *var,
+                            struct fb_info *fbi)
+{
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       u32 y_bottom;
+       unsigned long base;
+       off_t offset;
+       dma_cookie_t cookie;
+       struct scatterlist *sg = mx3_fbi->sg;
+       struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan;
+       struct dma_async_tx_descriptor *txd;
+       int ret;
+
+       dev_dbg(fbi->device, "%s [%c]\n", __func__,
+               list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+');
+
+       if (var->xoffset > 0) {
+               dev_dbg(fbi->device, "x panning not supported\n");
+               return -EINVAL;
+       }
+
+       if (fbi->var.xoffset == var->xoffset &&
+           fbi->var.yoffset == var->yoffset)
+               return 0;       /* No change, do nothing */
+
+       y_bottom = var->yoffset;
+
+       if (!(var->vmode & FB_VMODE_YWRAP))
+               y_bottom += var->yres;
+
+       if (y_bottom > fbi->var.yres_virtual)
+               return -EINVAL;
+
+       mutex_lock(&mx3_fbi->mutex);
+
+       offset = (var->yoffset * var->xres_virtual + var->xoffset) *
+               (var->bits_per_pixel / 8);
+       base = fbi->fix.smem_start + offset;
+
+       dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n",
+               mx3_fbi->cur_ipu_buf, base);
+
+       /*
+        * We enable the End of Frame interrupt, which will free a tx-descriptor,
+        * which we will need for the next device_prep_slave_sg(). The
+        * IRQ-handler will disable the IRQ again.
+        */
+       init_completion(&mx3_fbi->flip_cmpl);
+       enable_irq(mx3_fbi->idmac_channel->eof_irq);
+
+       ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10);
+       if (ret <= 0) {
+               mutex_unlock(&mx3_fbi->mutex);
+               dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ?
+                        "user interrupt" : "timeout");
+               return ret ? : -ETIMEDOUT;
+       }
+
+       mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf;
+
+       sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base;
+       sg_set_page(&sg[mx3_fbi->cur_ipu_buf],
+                   virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len,
+                   offset_in_page(fbi->screen_base + offset));
+
+       txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg +
+               mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+       if (!txd) {
+               dev_err(fbi->device,
+                       "Error preparing a DMA transaction descriptor.\n");
+               mutex_unlock(&mx3_fbi->mutex);
+               return -EIO;
+       }
+
+       txd->callback_param     = txd;
+       txd->callback           = mx3fb_dma_done;
+
+       /*
+        * Emulate original mx3fb behaviour: each new call to idmac_tx_submit()
+        * should switch to another buffer
+        */
+       cookie = txd->tx_submit(txd);
+       dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie);
+       if (cookie < 0) {
+               dev_err(fbi->device,
+                       "Error updating SDC buf %d to address=0x%08lX\n",
+                       mx3_fbi->cur_ipu_buf, base);
+               mutex_unlock(&mx3_fbi->mutex);
+               return -EIO;
+       }
+
+       if (mx3_fbi->txd)
+               async_tx_ack(mx3_fbi->txd);
+       mx3_fbi->txd = txd;
+
+       fbi->var.xoffset = var->xoffset;
+       fbi->var.yoffset = var->yoffset;
+
+       if (var->vmode & FB_VMODE_YWRAP)
+               fbi->var.vmode |= FB_VMODE_YWRAP;
+       else
+               fbi->var.vmode &= ~FB_VMODE_YWRAP;
+
+       mutex_unlock(&mx3_fbi->mutex);
+
+       dev_dbg(fbi->device, "Update complete\n");
+
+       return 0;
+}
+
+/*
+ * This structure contains the pointers to the control functions that are
+ * invoked by the core framebuffer driver to perform operations like
+ * blitting, rectangle filling, copy regions and cursor definition.
+ */
+static struct fb_ops mx3fb_ops = {
+       .owner = THIS_MODULE,
+       .fb_set_par = mx3fb_set_par,
+       .fb_check_var = mx3fb_check_var,
+       .fb_setcolreg = mx3fb_setcolreg,
+       .fb_pan_display = mx3fb_pan_display,
+       .fb_fillrect = cfb_fillrect,
+       .fb_copyarea = cfb_copyarea,
+       .fb_imageblit = cfb_imageblit,
+       .fb_blank = mx3fb_blank,
+};
+
+#ifdef CONFIG_PM
+/*
+ * Power management hooks.      Note that we won't be called from IRQ context,
+ * unlike the blank functions above, so we may sleep.
+ */
+
+/*
+ * Suspends the framebuffer and blanks the screen. Power management support
+ */
+static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
+{
+       struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+       struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+
+       acquire_console_sem();
+       fb_set_suspend(drv_data->fbi, 1);
+       release_console_sem();
+
+       if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+               sdc_disable_channel(mx3_fbi);
+               sdc_set_brightness(mx3fb, 0);
+
+       }
+       return 0;
+}
+
+/*
+ * Resumes the framebuffer and unblanks the screen. Power management support
+ */
+static int mx3fb_resume(struct platform_device *pdev)
+{
+       struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+       struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+
+       if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+               sdc_enable_channel(mx3_fbi);
+               sdc_set_brightness(mx3fb, drv_data->backlight_level);
+       }
+
+       acquire_console_sem();
+       fb_set_suspend(drv_data->fbi, 0);
+       release_console_sem();
+
+       return 0;
+}
+#else
+#define mx3fb_suspend   NULL
+#define mx3fb_resume    NULL
+#endif
+
+/*
+ * Main framebuffer functions
+ */
+
+/**
+ * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer.
+ * @fbi:       framebuffer information pointer
+ * @return:    Error code indicating success or failure
+ *
+ * This buffer is remapped into a non-cached, non-buffered, memory region to
+ * allow palette and pixel writes to occur without flushing the cache. Once this
+ * area is remapped, all virtual memory access to the video memory should occur
+ * at the new region.
+ */
+static int mx3fb_map_video_memory(struct fb_info *fbi)
+{
+       int retval = 0;
+       dma_addr_t addr;
+
+       fbi->screen_base = dma_alloc_writecombine(fbi->device,
+                                                 fbi->fix.smem_len,
+                                                 &addr, GFP_DMA);
+
+       if (!fbi->screen_base) {
+               dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
+                       fbi->fix.smem_len);
+               retval = -EBUSY;
+               goto err0;
+       }
+
+       fbi->fix.smem_start = addr;
+
+       dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
+               (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
+
+       fbi->screen_size = fbi->fix.smem_len;
+
+       /* Clear the screen */
+       memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
+
+       return 0;
+
+err0:
+       fbi->fix.smem_len = 0;
+       fbi->fix.smem_start = 0;
+       fbi->screen_base = NULL;
+       return retval;
+}
+
+/**
+ * mx3fb_unmap_video_memory() - de-allocate frame buffer memory.
+ * @fbi:       framebuffer information pointer
+ * @return:    error code indicating success or failure
+ */
+static int mx3fb_unmap_video_memory(struct fb_info *fbi)
+{
+       dma_free_writecombine(fbi->device, fbi->fix.smem_len,
+                             fbi->screen_base, fbi->fix.smem_start);
+
+       fbi->screen_base = 0;
+       fbi->fix.smem_start = 0;
+       fbi->fix.smem_len = 0;
+       return 0;
+}
+
+/**
+ * mx3fb_init_fbinfo() - initialize framebuffer information object.
+ * @return:    initialized framebuffer structure.
+ */
+static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
+{
+       struct fb_info *fbi;
+       struct mx3fb_info *mx3fbi;
+       int ret;
+
+       /* Allocate sufficient memory for the fb structure */
+       fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev);
+       if (!fbi)
+               return NULL;
+
+       mx3fbi                  = fbi->par;
+       mx3fbi->cookie          = -EINVAL;
+       mx3fbi->cur_ipu_buf     = 0;
+
+       fbi->var.activate       = FB_ACTIVATE_NOW;
+
+       fbi->fbops              = ops;
+       fbi->flags              = FBINFO_FLAG_DEFAULT;
+       fbi->pseudo_palette     = mx3fbi->pseudo_palette;
+
+       mutex_init(&mx3fbi->mutex);
+
+       /* Allocate colormap */
+       ret = fb_alloc_cmap(&fbi->cmap, 16, 0);
+       if (ret < 0) {
+               framebuffer_release(fbi);
+               return NULL;
+       }
+
+       return fbi;
+}
+
+static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
+{
+       struct device *dev = mx3fb->dev;
+       struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data;
+       const char *name = mx3fb_pdata->name;
+       unsigned int irq;
+       struct fb_info *fbi;
+       struct mx3fb_info *mx3fbi;
+       const struct fb_videomode *mode;
+       int ret, num_modes;
+
+       ichan->client = mx3fb;
+       irq = ichan->eof_irq;
+
+       if (ichan->dma_chan.chan_id != IDMAC_SDC_0)
+               return -EINVAL;
+
+       fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops);
+       if (!fbi)
+               return -ENOMEM;
+
+       if (!fb_mode)
+               fb_mode = name;
+
+       if (!fb_mode) {
+               ret = -EINVAL;
+               goto emode;
+       }
+
+       if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
+               mode = mx3fb_pdata->mode;
+               num_modes = mx3fb_pdata->num_modes;
+       } else {
+               mode = mx3fb_modedb;
+               num_modes = ARRAY_SIZE(mx3fb_modedb);
+       }
+
+       if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
+                         num_modes, NULL, default_bpp)) {
+               ret = -EBUSY;
+               goto emode;
+       }
+
+       fb_videomode_to_modelist(mode, num_modes, &fbi->modelist);
+
+       /* Default Y virtual size is 2x panel size */
+       fbi->var.yres_virtual = fbi->var.yres * 2;
+
+       mx3fb->fbi = fbi;
+
+       /* set Display Interface clock period */
+       mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER);
+       /* Might need to trigger HSP clock change - see 44.3.3.8.5 */
+
+       sdc_set_brightness(mx3fb, 255);
+       sdc_set_global_alpha(mx3fb, true, 0xFF);
+       sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0);
+
+       mx3fbi                  = fbi->par;
+       mx3fbi->idmac_channel   = ichan;
+       mx3fbi->ipu_ch          = ichan->dma_chan.chan_id;
+       mx3fbi->mx3fb           = mx3fb;
+       mx3fbi->blank           = FB_BLANK_NORMAL;
+
+       init_completion(&mx3fbi->flip_cmpl);
+       disable_irq(ichan->eof_irq);
+       dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
+       ret = mx3fb_set_par(fbi);
+       if (ret < 0)
+               goto esetpar;
+
+       mx3fb_blank(FB_BLANK_UNBLANK, fbi);
+
+       dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+
+       ret = register_framebuffer(fbi);
+       if (ret < 0)
+               goto erfb;
+
+       return 0;
+
+erfb:
+esetpar:
+emode:
+       fb_dealloc_cmap(&fbi->cmap);
+       framebuffer_release(fbi);
+
+       return ret;
+}
+
+static bool chan_filter(struct dma_chan *chan, void *arg)
+{
+       struct dma_chan_request *rq = arg;
+       struct device *dev;
+       struct mx3fb_platform_data *mx3fb_pdata;
+
+       if (!rq)
+               return false;
+
+       dev = rq->mx3fb->dev;
+       mx3fb_pdata = dev->platform_data;
+
+       return rq->id == chan->chan_id &&
+               mx3fb_pdata->dma_dev == chan->device->dev;
+}
+
+static void release_fbi(struct fb_info *fbi)
+{
+       mx3fb_unmap_video_memory(fbi);
+
+       fb_dealloc_cmap(&fbi->cmap);
+
+       unregister_framebuffer(fbi);
+       framebuffer_release(fbi);
+}
+
+static int mx3fb_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       int ret;
+       struct resource *sdc_reg;
+       struct mx3fb_data *mx3fb;
+       dma_cap_mask_t mask;
+       struct dma_chan *chan;
+       struct dma_chan_request rq;
+
+       /*
+        * Display Interface (DI) and Synchronous Display Controller (SDC)
+        * registers
+        */
+       sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!sdc_reg)
+               return -EINVAL;
+
+       mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL);
+       if (!mx3fb)
+               return -ENOMEM;
+
+       spin_lock_init(&mx3fb->lock);
+
+       mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg));
+       if (!mx3fb->reg_base) {
+               ret = -ENOMEM;
+               goto eremap;
+       }
+
+       pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end,
+                mx3fb->reg_base);
+
+       /* IDMAC interface */
+       dmaengine_get();
+
+       mx3fb->dev = dev;
+       platform_set_drvdata(pdev, mx3fb);
+
+       rq.mx3fb = mx3fb;
+
+       dma_cap_zero(mask);
+       dma_cap_set(DMA_SLAVE, mask);
+       dma_cap_set(DMA_PRIVATE, mask);
+       rq.id = IDMAC_SDC_0;
+       chan = dma_request_channel(mask, chan_filter, &rq);
+       if (!chan) {
+               ret = -EBUSY;
+               goto ersdc0;
+       }
+
+       ret = init_fb_chan(mx3fb, to_idmac_chan(chan));
+       if (ret < 0)
+               goto eisdc0;
+
+       mx3fb->backlight_level = 255;
+
+       return 0;
+
+eisdc0:
+       dma_release_channel(chan);
+ersdc0:
+       dmaengine_put();
+       iounmap(mx3fb->reg_base);
+eremap:
+       kfree(mx3fb);
+       dev_err(dev, "mx3fb: failed to register fb\n");
+       return ret;
+}
+
+static int mx3fb_remove(struct platform_device *dev)
+{
+       struct mx3fb_data *mx3fb = platform_get_drvdata(dev);
+       struct fb_info *fbi = mx3fb->fbi;
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       struct dma_chan *chan;
+
+       chan = &mx3_fbi->idmac_channel->dma_chan;
+       release_fbi(fbi);
+
+       dma_release_channel(chan);
+       dmaengine_put();
+
+       iounmap(mx3fb->reg_base);
+       kfree(mx3fb);
+       return 0;
+}
+
+static struct platform_driver mx3fb_driver = {
+       .driver = {
+                  .name = MX3FB_NAME,
+       },
+       .probe = mx3fb_probe,
+       .remove = mx3fb_remove,
+       .suspend = mx3fb_suspend,
+       .resume = mx3fb_resume,
+};
+
+/*
+ * Parse user specified options (`video=mx3fb:')
+ * example:
+ *     video=mx3fb:bpp=16
+ */
+static int mx3fb_setup(void)
+{
+#ifndef MODULE
+       char *opt, *options = NULL;
+
+       if (fb_get_options("mx3fb", &options))
+               return -ENODEV;
+
+       if (!options || !*options)
+               return 0;
+
+       while ((opt = strsep(&options, ",")) != NULL) {
+               if (!*opt)
+                       continue;
+               if (!strncmp(opt, "bpp=", 4))
+                       default_bpp = simple_strtoul(opt + 4, NULL, 0);
+               else
+                       fb_mode = opt;
+       }
+#endif
+
+       return 0;
+}
+
+static int __init mx3fb_init(void)
+{
+       int ret = mx3fb_setup();
+
+       if (ret < 0)
+               return ret;
+
+       ret = platform_driver_register(&mx3fb_driver);
+       return ret;
+}
+
+static void __exit mx3fb_exit(void)
+{
+       platform_driver_unregister(&mx3fb_driver);
+}
+
+module_init(mx3fb_init);
+module_exit(mx3fb_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("MX3 framebuffer driver");
+MODULE_ALIAS("platform:" MX3FB_NAME);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c
index 6fd7cb8f9b8..6aaddb4f678 100644
--- a/drivers/video/nvidia/nv_i2c.c
+++ b/drivers/video/nvidia/nv_i2c.c
@@ -87,7 +87,6 @@ static int nvidia_setup_i2c_bus(struct nvidia_i2c_chan *chan, const char *name,
 
 	strcpy(chan->adapter.name, name);
 	chan->adapter.owner = THIS_MODULE;
-	chan->adapter.id = I2C_HW_B_NVIDIA;
 	chan->adapter.class = i2c_class;
 	chan->adapter.algo_data = &chan->algo;
 	chan->adapter.dev.parent = &chan->par->pci_dev->dev;
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index 6e2ea751876..ab394925667 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -800,14 +800,14 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
 	/* FIXME:
 	 * According to errata some platforms have a clock rate limitiation
 	 */
-	lcdc.lcd_ck = clk_get(NULL, "lcd_ck");
+	lcdc.lcd_ck = clk_get(fbdev->dev, "lcd_ck");
 	if (IS_ERR(lcdc.lcd_ck)) {
 		dev_err(fbdev->dev, "unable to access LCD clock\n");
 		r = PTR_ERR(lcdc.lcd_ck);
 		goto fail0;
 	}
 
-	tc_ck = clk_get(NULL, "tc_ck");
+	tc_ck = clk_get(fbdev->dev, "tc_ck");
 	if (IS_ERR(tc_ck)) {
 		dev_err(fbdev->dev, "unable to access TC clock\n");
 		r = PTR_ERR(tc_ck);
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index 79cf0b1976a..b0b4513ba53 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -1017,6 +1017,10 @@ static int s3c2410fb_resume(struct platform_device *dev)
 
 	s3c2410fb_init_registers(fbinfo);
 
+	/* re-activate our display after resume */
+	s3c2410fb_activate_var(fbinfo);
+	s3c2410fb_blank(FB_BLANK_UNBLANK, fbinfo);
+
 	return 0;
 }
 
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 076f946fa0f..022d07abbf9 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -251,22 +251,6 @@ static struct sa1100fb_mach_info pal_info __initdata = {
 #endif
 #endif
 
-#ifdef CONFIG_SA1100_H3800
-static struct sa1100fb_mach_info h3800_info __initdata = {
-	.pixclock	= 174757, 	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 3,		.vsync_len	= 3,
-	.left_margin	= 12,		.upper_margin	= 10,
-	.right_margin	= 17,		.lower_margin	= 1,
-
-	.cmap_static	= 1,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#endif
-
 #ifdef CONFIG_SA1100_H3600
 static struct sa1100fb_mach_info h3600_info __initdata = {
 	.pixclock	= 174757, 	.bpp		= 16,
@@ -432,11 +416,6 @@ sa1100fb_get_machine_info(struct sa1100fb_info *fbi)
 		fbi->rgb[RGB_16] = &h3600_rgb_16;
 	}
 #endif
-#ifdef CONFIG_SA1100_H3800
-	if (machine_is_h3800()) {
-		inf = &h3800_info;
-	}
-#endif
 #ifdef CONFIG_SA1100_COLLIE
 	if (machine_is_collie()) {
 		inf = &collie_info;
diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c
index 783d4adffb9..574b29e9f8f 100644
--- a/drivers/video/savage/savagefb-i2c.c
+++ b/drivers/video/savage/savagefb-i2c.c
@@ -137,7 +137,6 @@ static int savage_setup_i2c_bus(struct savagefb_i2c_chan *chan,
 	if (chan->par) {
 		strcpy(chan->adapter.name, name);
 		chan->adapter.owner		= THIS_MODULE;
-		chan->adapter.id		= I2C_HW_B_SAVAGE;
 		chan->adapter.algo_data		= &chan->algo;
 		chan->adapter.dev.parent	= &chan->par->pcidev->dev;
 		chan->algo.udelay		= 10;
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index bef6b45e8a5..330aacbdec1 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -192,7 +192,7 @@ static irqreturn_t vp_interrupt(int irq, void *opaque)
 		drv = container_of(vp_dev->vdev.dev.driver,
 				   struct virtio_driver, driver);
 
-		if (drv->config_changed)
+		if (drv && drv->config_changed)
 			drv->config_changed(&vp_dev->vdev);
 	}
 
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 3efa12f9ee5..09a3d5522b4 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -187,10 +187,10 @@ config EP93XX_WATCHDOG
 
 config OMAP_WATCHDOG
 	tristate "OMAP Watchdog"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
 	help
-	  Support for TI OMAP1610/OMAP1710/OMAP2420 watchdog.  Say 'Y' here to
-	  enable the OMAP1610/OMAP1710 watchdog timer.
+	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog.  Say 'Y'
+	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer.
 
 config PNX4008_WATCHDOG
 	tristate "PNX4008 Watchdog"
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 993e5f52afe..5531691f46e 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -13,6 +13,7 @@
 #include <linux/errno.h>
 #include <linux/fs.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 8dc7109d61b..efa4b363ce7 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -298,6 +298,14 @@ static int decrease_reservation(unsigned long nr_pages)
 		frame_list[i] = pfn_to_mfn(pfn);
 
 		scrub_page(page);
+
+		if (!PageHighMem(page)) {
+			ret = HYPERVISOR_update_va_mapping(
+				(unsigned long)__va(pfn << PAGE_SHIFT),
+				__pte_ma(0), 0);
+			BUG_ON(ret);
+                }
+
 	}
 
 	/* Ensure that ballooned highmem pages don't have kmaps. */
@@ -490,7 +498,7 @@ static ssize_t store_target_kb(struct sys_device *dev,
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	target_bytes = memparse(buf, &endchar);
+	target_bytes = simple_strtoull(buf, &endchar, 0) * 1024;
 
 	balloon_set_new_target(target_bytes >> PAGE_SHIFT);
 
@@ -500,8 +508,39 @@ static ssize_t store_target_kb(struct sys_device *dev,
 static SYSDEV_ATTR(target_kb, S_IRUGO | S_IWUSR,
 		   show_target_kb, store_target_kb);
 
+
+static ssize_t show_target(struct sys_device *dev, struct sysdev_attribute *attr,
+			      char *buf)
+{
+	return sprintf(buf, "%llu\n",
+		       (u64)balloon_stats.target_pages << PAGE_SHIFT);
+}
+
+static ssize_t store_target(struct sys_device *dev,
+			    struct sysdev_attribute *attr,
+			    const char *buf,
+			    size_t count)
+{
+	char *endchar;
+	unsigned long long target_bytes;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	target_bytes = memparse(buf, &endchar);
+
+	balloon_set_new_target(target_bytes >> PAGE_SHIFT);
+
+	return count;
+}
+
+static SYSDEV_ATTR(target, S_IRUGO | S_IWUSR,
+		   show_target, store_target);
+
+
 static struct sysdev_attribute *balloon_attrs[] = {
 	&attr_target_kb,
+	&attr_target,
 };
 
 static struct attribute *balloon_info_attrs[] = {
diff --git a/drivers/xen/xenfs/xenbus.c b/drivers/xen/xenfs/xenbus.c
index 875a4c59c59..a9592d981b1 100644
--- a/drivers/xen/xenfs/xenbus.c
+++ b/drivers/xen/xenfs/xenbus.c
@@ -291,7 +291,7 @@ static void watch_fired(struct xenbus_watch *watch,
 static int xenbus_write_transaction(unsigned msg_type,
 				    struct xenbus_file_priv *u)
 {
-	int rc, ret;
+	int rc;
 	void *reply;
 	struct xenbus_transaction_holder *trans = NULL;
 	LIST_HEAD(staging_q);
@@ -326,15 +326,14 @@ static int xenbus_write_transaction(unsigned msg_type,
 	}
 
 	mutex_lock(&u->reply_mutex);
-	ret = queue_reply(&staging_q, &u->u.msg, sizeof(u->u.msg));
-	if (!ret)
-		ret = queue_reply(&staging_q, reply, u->u.msg.len);
-	if (!ret) {
+	rc = queue_reply(&staging_q, &u->u.msg, sizeof(u->u.msg));
+	if (!rc)
+		rc = queue_reply(&staging_q, reply, u->u.msg.len);
+	if (!rc) {
 		list_splice_tail(&staging_q, &u->read_buffers);
 		wake_up(&u->read_waitq);
 	} else {
 		queue_cleanup(&staging_q);
-		rc = ret;
 	}
 	mutex_unlock(&u->reply_mutex);