aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorJeff Garzik <jeff@garzik.org>2006-05-20 00:03:38 -0400
committerJeff Garzik <jeff@garzik.org>2006-05-20 00:03:38 -0400
commitbadc48e6605ddeeb2484afae5993c859494decaa (patch)
tree7da638f9bb53b1812b71e40ad6deca91d59ad301 /drivers
parent753a6c4ff4c371a3e4e3408aaba4d03f3cfde73a (diff)
parent2f880b65fdbc2d4915bddc59d75a176329570fdd (diff)
Merge branch 'master' into upstream
Diffstat (limited to 'drivers')
-rw-r--r--drivers/base/class.c32
-rw-r--r--drivers/block/ub.c18
-rw-r--r--drivers/char/Kconfig2
-rw-r--r--drivers/char/pcmcia/cm4000_cs.c10
-rw-r--r--drivers/char/pcmcia/cm4040_cs.c11
-rw-r--r--drivers/char/rio/host.h9
-rw-r--r--drivers/char/rio/rioboot.c1
-rw-r--r--drivers/char/rio/rioctrl.c43
-rw-r--r--drivers/char/rio/rioioctl.h56
-rw-r--r--drivers/char/tpm/Kconfig2
-rw-r--r--drivers/char/tpm/tpm.h2
-rw-r--r--drivers/char/tpm/tpm_tis.c2
-rw-r--r--drivers/char/watchdog/i8xx_tco.c16
-rw-r--r--drivers/char/watchdog/s3c2410_wdt.c6
-rw-r--r--drivers/char/watchdog/sc1200wdt.c2
-rw-r--r--drivers/cpufreq/cpufreq_ondemand.c28
-rw-r--r--drivers/edac/e752x_edac.c17
-rw-r--r--drivers/i2c/busses/scx200_acb.c16
-rw-r--r--drivers/ide/legacy/ide-cs.c1
-rw-r--r--drivers/ieee1394/ohci1394.c2
-rw-r--r--drivers/ieee1394/sbp2.c209
-rw-r--r--drivers/ieee1394/sbp2.h18
-rw-r--r--drivers/infiniband/core/cm.c12
-rw-r--r--drivers/infiniband/core/mad.c47
-rw-r--r--drivers/infiniband/core/mad_priv.h5
-rw-r--r--drivers/infiniband/core/mad_rmpp.c20
-rw-r--r--drivers/infiniband/core/sysfs.c2
-rw-r--r--drivers/infiniband/core/ucm.c12
-rw-r--r--drivers/infiniband/core/uverbs_mem.c4
-rw-r--r--drivers/infiniband/hw/ipath/ipath_driver.c7
-rw-r--r--drivers/infiniband/hw/mthca/mthca_cmd.c2
-rw-r--r--drivers/infiniband/hw/mthca/mthca_cq.c41
-rw-r--r--drivers/infiniband/hw/mthca/mthca_dev.h2
-rw-r--r--drivers/infiniband/hw/mthca/mthca_mr.c15
-rw-r--r--drivers/infiniband/hw/mthca/mthca_provider.h22
-rw-r--r--drivers/infiniband/hw/mthca/mthca_qp.c66
-rw-r--r--drivers/infiniband/hw/mthca/mthca_srq.c23
-rw-r--r--drivers/infiniband/ulp/ipoib/ipoib_vlan.c4
-rw-r--r--drivers/infiniband/ulp/srp/ib_srp.c203
-rw-r--r--drivers/infiniband/ulp/srp/ib_srp.h4
-rw-r--r--drivers/input/touchscreen/corgi_ts.c2
-rw-r--r--drivers/isdn/capi/capi.c1
-rw-r--r--drivers/isdn/gigaset/usb-gigaset.c4
-rw-r--r--drivers/leds/Kconfig7
-rw-r--r--drivers/leds/led-class.c9
-rw-r--r--drivers/leds/ledtrig-timer.c17
-rw-r--r--drivers/message/fusion/mptbase.c63
-rw-r--r--drivers/message/fusion/mptbase.h10
-rw-r--r--drivers/message/fusion/mptfc.c134
-rw-r--r--drivers/message/fusion/mptsas.c99
-rw-r--r--drivers/message/fusion/mptscsih.c50
-rw-r--r--drivers/message/fusion/mptspi.c68
-rw-r--r--drivers/mmc/at91_mci.c3
-rw-r--r--drivers/mmc/au1xmmc.c10
-rw-r--r--drivers/mmc/imxmmc.c84
-rw-r--r--drivers/mmc/mmc.c63
-rw-r--r--drivers/mmc/mmc_block.c7
-rw-r--r--drivers/mmc/mmci.c3
-rw-r--r--drivers/mmc/pxamci.c17
-rw-r--r--drivers/mmc/sdhci.c4
-rw-r--r--drivers/mmc/wbsd.c12
-rw-r--r--drivers/net/au1000_eth.c18
-rw-r--r--drivers/net/b44.c28
-rw-r--r--drivers/net/dl2k.c13
-rw-r--r--drivers/net/hamradio/dmascc.c1
-rw-r--r--drivers/net/hamradio/scc.c1
-rw-r--r--drivers/net/hamradio/yam.c1
-rw-r--r--drivers/net/irda/Makefile2
-rw-r--r--drivers/net/irda/irda-usb.c2
-rw-r--r--drivers/net/irda/sir-dev.h13
-rw-r--r--drivers/net/irda/sir_dev.c315
-rw-r--r--drivers/net/irda/sir_kthread.c508
-rw-r--r--drivers/net/irda/smsc-ircc2.c14
-rw-r--r--drivers/net/ixp2000/enp2611.c13
-rw-r--r--drivers/net/ixp2000/pm3386.c30
-rw-r--r--drivers/net/ixp2000/pm3386.h1
-rw-r--r--drivers/net/ne.c31
-rw-r--r--drivers/net/phy/mdio_bus.c4
-rw-r--r--drivers/net/sis900.c1
-rw-r--r--drivers/net/sky2.c235
-rw-r--r--drivers/net/sky2.h3
-rw-r--r--drivers/net/spider_net.c12
-rw-r--r--drivers/net/spider_net.h2
-rw-r--r--drivers/net/sungem_phy.c45
-rw-r--r--drivers/net/sungem_phy.h1
-rw-r--r--drivers/net/tg3.c11
-rw-r--r--drivers/net/wireless/bcm43xx/bcm43xx_main.c45
-rw-r--r--drivers/net/wireless/bcm43xx/bcm43xx_main.h6
-rw-r--r--drivers/net/wireless/bcm43xx/bcm43xx_phy.c2
-rw-r--r--drivers/net/wireless/bcm43xx/bcm43xx_wx.c7
-rw-r--r--drivers/pci/quirks.c16
-rw-r--r--drivers/pcmcia/pcmcia_ioctl.c23
-rw-r--r--drivers/rtc/rtc-sa1100.c6
-rw-r--r--drivers/s390/net/lcs.c2
-rw-r--r--drivers/sbus/char/openprom.c15
-rw-r--r--drivers/scsi/aic7xxx/aic7xxx_osm_pci.c1
-rw-r--r--drivers/scsi/aic7xxx/aic7xxx_pci.c12
-rw-r--r--drivers/scsi/ibmvscsi/ibmvscsi.c30
-rw-r--r--drivers/scsi/lpfc/lpfc_crtn.h1
-rw-r--r--drivers/scsi/lpfc/lpfc_disc.h1
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c95
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c18
-rw-r--r--drivers/scsi/lpfc/lpfc_hw.h3
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c22
-rw-r--r--drivers/scsi/lpfc/lpfc_mbox.c33
-rw-r--r--drivers/scsi/lpfc/lpfc_nportdisc.c134
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.c68
-rw-r--r--drivers/scsi/lpfc/lpfc_version.h2
-rw-r--r--drivers/scsi/megaraid.c1
-rw-r--r--drivers/scsi/megaraid/megaraid_mbox.c59
-rw-r--r--drivers/scsi/megaraid/megaraid_mbox.h7
-rw-r--r--drivers/scsi/megaraid/megaraid_mm.c6
-rw-r--r--drivers/scsi/qla2xxx/qla_os.c19
-rw-r--r--drivers/scsi/scsi_devinfo.c2
-rw-r--r--drivers/scsi/scsi_lib.c27
-rw-r--r--drivers/scsi/sim710.c2
-rw-r--r--drivers/serial/8250.c74
-rw-r--r--drivers/serial/8250_au1x00.c5
-rw-r--r--drivers/serial/cpm_uart/cpm_uart.h19
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c37
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm1.c2
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm2.c2
-rw-r--r--drivers/serial/imx.c40
-rw-r--r--drivers/serial/serial_core.c123
-rw-r--r--drivers/sn/ioc4.c2
-rw-r--r--drivers/spi/Kconfig8
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/pxa2xx_spi.c1467
-rw-r--r--drivers/spi/spi.c7
-rw-r--r--drivers/spi/spi_bitbang.c104
-rw-r--r--drivers/usb/atm/speedtch.c2
-rw-r--r--drivers/usb/atm/usbatm.c8
-rw-r--r--drivers/usb/core/hcd.c13
-rw-r--r--drivers/usb/core/hub.c23
-rw-r--r--drivers/usb/host/ohci-hcd.c2
-rw-r--r--drivers/usb/input/hid-core.c4
-rw-r--r--drivers/usb/misc/emi26.c4
-rw-r--r--drivers/usb/misc/emi62.c4
-rw-r--r--drivers/usb/net/pegasus.c20
-rw-r--r--drivers/usb/serial/Kconfig10
-rw-r--r--drivers/usb/serial/Makefile1
-rw-r--r--drivers/usb/serial/airprime.c1
-rw-r--r--drivers/usb/serial/ark3116.c465
-rw-r--r--drivers/usb/serial/ftdi_sio.c2
-rw-r--r--drivers/usb/serial/ftdi_sio.h9
-rw-r--r--drivers/usb/serial/generic.c1
-rw-r--r--drivers/usb/serial/omninet.c12
-rw-r--r--drivers/usb/serial/usb-serial.c19
-rw-r--r--drivers/video/backlight/backlight.c18
-rw-r--r--drivers/video/backlight/lcd.c32
-rw-r--r--drivers/video/logo/Makefile2
151 files changed, 4357 insertions, 1817 deletions
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 0e71dff327c..b1ea4df85c7 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -456,6 +456,35 @@ static void class_device_remove_attrs(struct class_device * cd)
}
}
+static int class_device_add_groups(struct class_device * cd)
+{
+ int i;
+ int error = 0;
+
+ if (cd->groups) {
+ for (i = 0; cd->groups[i]; i++) {
+ error = sysfs_create_group(&cd->kobj, cd->groups[i]);
+ if (error) {
+ while (--i >= 0)
+ sysfs_remove_group(&cd->kobj, cd->groups[i]);
+ goto out;
+ }
+ }
+ }
+out:
+ return error;
+}
+
+static void class_device_remove_groups(struct class_device * cd)
+{
+ int i;
+ if (cd->groups) {
+ for (i = 0; cd->groups[i]; i++) {
+ sysfs_remove_group(&cd->kobj, cd->groups[i]);
+ }
+ }
+}
+
static ssize_t show_dev(struct class_device *class_dev, char *buf)
{
return print_dev_t(buf, class_dev->devt);
@@ -559,6 +588,8 @@ int class_device_add(struct class_device *class_dev)
class_name);
}
+ class_device_add_groups(class_dev);
+
kobject_uevent(&class_dev->kobj, KOBJ_ADD);
/* notify any interfaces this device is now here */
@@ -672,6 +703,7 @@ void class_device_del(struct class_device *class_dev)
if (class_dev->devt_attr)
class_device_remove_file(class_dev, class_dev->devt_attr);
class_device_remove_attrs(class_dev);
+ class_device_remove_groups(class_dev);
kobject_uevent(&class_dev->kobj, KOBJ_REMOVE);
kobject_del(&class_dev->kobj);
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index f73446f580d..c688c25992e 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -536,6 +536,9 @@ static void ub_cleanup(struct ub_dev *sc)
kfree(lun);
}
+ usb_set_intfdata(sc->intf, NULL);
+ usb_put_intf(sc->intf);
+ usb_put_dev(sc->dev);
kfree(sc);
}
@@ -2221,7 +2224,12 @@ static int ub_probe(struct usb_interface *intf,
// sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
usb_set_intfdata(intf, sc);
usb_get_dev(sc->dev);
- // usb_get_intf(sc->intf); /* Do we need this? */
+ /*
+ * Since we give the interface struct to the block level through
+ * disk->driverfs_dev, we have to pin it. Otherwise, block_uevent
+ * oopses on close after a disconnect (kernels 2.6.16 and up).
+ */
+ usb_get_intf(sc->intf);
snprintf(sc->name, 12, DRV_NAME "(%d.%d)",
sc->dev->bus->busnum, sc->dev->devnum);
@@ -2286,7 +2294,7 @@ static int ub_probe(struct usb_interface *intf,
err_dev_desc:
usb_set_intfdata(intf, NULL);
- // usb_put_intf(sc->intf);
+ usb_put_intf(sc->intf);
usb_put_dev(sc->dev);
kfree(sc);
err_core:
@@ -2461,12 +2469,6 @@ static void ub_disconnect(struct usb_interface *intf)
* and no URBs left in transit.
*/
- usb_set_intfdata(intf, NULL);
- // usb_put_intf(sc->intf);
- sc->intf = NULL;
- usb_put_dev(sc->dev);
- sc->dev = NULL;
-
ub_put(sc);
}
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 402296670d3..78d928f9d9f 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -291,7 +291,7 @@ config SX
config RIO
tristate "Specialix RIO system support"
- depends on SERIAL_NONSTANDARD && !64BIT
+ depends on SERIAL_NONSTANDARD
help
This is a driver for the Specialix RIO, a smart serial card which
drives an outboard box that can support up to 128 ports. Product
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 02114a0bd0d..128b2632512 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -1981,10 +1981,6 @@ static int __init cmm_init(void)
if (!cmm_class)
return -1;
- rc = pcmcia_register_driver(&cm4000_driver);
- if (rc < 0)
- return rc;
-
major = register_chrdev(0, DEVICE_NAME, &cm4000_fops);
if (major < 0) {
printk(KERN_WARNING MODULE_NAME
@@ -1992,6 +1988,12 @@ static int __init cmm_init(void)
return -1;
}
+ rc = pcmcia_register_driver(&cm4000_driver);
+ if (rc < 0) {
+ unregister_chrdev(major, DEVICE_NAME);
+ return rc;
+ }
+
return 0;
}
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index 29efa64580a..47a8465bf95 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -724,16 +724,19 @@ static int __init cm4040_init(void)
if (!cmx_class)
return -1;
- rc = pcmcia_register_driver(&reader_driver);
- if (rc < 0)
- return rc;
-
major = register_chrdev(0, DEVICE_NAME, &reader_fops);
if (major < 0) {
printk(KERN_WARNING MODULE_NAME
": could not get major number\n");
return -1;
}
+
+ rc = pcmcia_register_driver(&reader_driver);
+ if (rc < 0) {
+ unregister_chrdev(major, DEVICE_NAME);
+ return rc;
+ }
+
return 0;
}
diff --git a/drivers/char/rio/host.h b/drivers/char/rio/host.h
index 3ec73d1a279..179cdbea712 100644
--- a/drivers/char/rio/host.h
+++ b/drivers/char/rio/host.h
@@ -33,12 +33,6 @@
#ifndef __rio_host_h__
#define __rio_host_h__
-#ifdef SCCS_LABELS
-#ifndef lint
-static char *_host_h_sccs_ = "@(#)host.h 1.2";
-#endif
-#endif
-
/*
** the host structure - one per host card in the system.
*/
@@ -77,9 +71,6 @@ struct Host {
#define RC_STARTUP 1
#define RC_RUNNING 2
#define RC_STUFFED 3
-#define RC_SOMETHING 4
-#define RC_SOMETHING_NEW 5
-#define RC_SOMETHING_ELSE 6
#define RC_READY 7
#define RUN_STATE 7
/*
diff --git a/drivers/char/rio/rioboot.c b/drivers/char/rio/rioboot.c
index acda9326c2e..290143addd3 100644
--- a/drivers/char/rio/rioboot.c
+++ b/drivers/char/rio/rioboot.c
@@ -34,6 +34,7 @@
#include <linux/slab.h>
#include <linux/termios.h>
#include <linux/serial.h>
+#include <linux/vmalloc.h>
#include <asm/semaphore.h>
#include <linux/generic_serial.h>
#include <linux/errno.h>
diff --git a/drivers/char/rio/rioctrl.c b/drivers/char/rio/rioctrl.c
index d31aba62bb7..75b2557c37e 100644
--- a/drivers/char/rio/rioctrl.c
+++ b/drivers/char/rio/rioctrl.c
@@ -1394,14 +1394,17 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd)
return RIO_FAIL;
}
- if (((int) ((char) PortP->InUse) == -1) || !(CmdBlkP = RIOGetCmdBlk())) {
- rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block for command %d on port %d\n", Cmd, PortP->PortNum);
+ if ((PortP->InUse == (typeof(PortP->InUse))-1) ||
+ !(CmdBlkP = RIOGetCmdBlk())) {
+ rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block "
+ "for command %d on port %d\n", Cmd, PortP->PortNum);
return RIO_FAIL;
}
- rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n", CmdBlkP, PortP->InUse);
+ rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n",
+ CmdBlkP, PortP->InUse);
- PktCmdP = (struct PktCmd_M *) &CmdBlkP->Packet.data[0];
+ PktCmdP = (struct PktCmd_M *)&CmdBlkP->Packet.data[0];
CmdBlkP->Packet.src_unit = 0;
if (PortP->SecondBlock)
@@ -1425,38 +1428,46 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd)
switch (Cmd) {
case MEMDUMP:
- rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p (addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr);
+ rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p "
+ "(addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr);
PktCmdP->SubCommand = MEMDUMP;
PktCmdP->SubAddr = SubCmd.Addr;
break;
case FCLOSE:
- rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n", CmdBlkP);
+ rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n",
+ CmdBlkP);
break;
case READ_REGISTER:
- rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) command blk %p\n", (int) SubCmd.Addr, CmdBlkP);
+ rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) "
+ "command blk %p\n", (int) SubCmd.Addr, CmdBlkP);
PktCmdP->SubCommand = READ_REGISTER;
PktCmdP->SubAddr = SubCmd.Addr;
break;
case RESUME:
- rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n", CmdBlkP);
+ rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n",
+ CmdBlkP);
break;
case RFLUSH:
- rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n", CmdBlkP);
+ rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n",
+ CmdBlkP);
CmdBlkP->PostFuncP = RIORFlushEnable;
break;
case SUSPEND:
- rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n", CmdBlkP);
+ rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n",
+ CmdBlkP);
break;
case MGET:
- rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n", CmdBlkP);
+ rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n",
+ CmdBlkP);
break;
case MSET:
case MBIC:
case MBIS:
CmdBlkP->Packet.data[4] = (char) PortP->ModemLines;
- rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command blk %p\n", CmdBlkP);
+ rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command "
+ "blk %p\n", CmdBlkP);
break;
case WFLUSH:
@@ -1465,12 +1476,14 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd)
** allowed then we should not bother sending any more to the
** RTA.
*/
- if ((int) ((char) PortP->WflushFlag) == (int) -1) {
- rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, WflushFlag about to wrap!");
+ if (PortP->WflushFlag == (typeof(PortP->WflushFlag))-1) {
+ rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, "
+ "WflushFlag about to wrap!");
RIOFreeCmdBlk(CmdBlkP);
return (RIO_FAIL);
} else {
- rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command blk %p\n", CmdBlkP);
+ rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command "
+ "blk %p\n", CmdBlkP);
CmdBlkP->PostFuncP = RIOWFlushMark;
}
break;
diff --git a/drivers/char/rio/rioioctl.h b/drivers/char/rio/rioioctl.h
index 14b83fae75c..e8af5b30519 100644
--- a/drivers/char/rio/rioioctl.h
+++ b/drivers/char/rio/rioioctl.h
@@ -33,10 +33,6 @@
#ifndef __rioioctl_h__
#define __rioioctl_h__
-#ifdef SCCS_LABELS
-static char *_rioioctl_h_sccs_ = "@(#)rioioctl.h 1.2";
-#endif
-
/*
** RIO device driver - user ioctls and associated structures.
*/
@@ -44,55 +40,13 @@ static char *_rioioctl_h_sccs_ = "@(#)rioioctl.h 1.2";
struct portStats {
int port;
int gather;
- ulong txchars;
- ulong rxchars;
- ulong opens;
- ulong closes;
- ulong ioctls;
+ unsigned long txchars;
+ unsigned long rxchars;
+ unsigned long opens;
+ unsigned long closes;
+ unsigned long ioctls;
};
-
-#define rIOC ('r'<<8)
-#define TCRIOSTATE (rIOC | 1)
-#define TCRIOXPON (rIOC | 2)
-#define TCRIOXPOFF (rIOC | 3)
-#define TCRIOXPCPS (rIOC | 4)
-#define TCRIOXPRINT (rIOC | 5)
-#define TCRIOIXANYON (rIOC | 6)
-#define TCRIOIXANYOFF (rIOC | 7)
-#define TCRIOIXONON (rIOC | 8)
-#define TCRIOIXONOFF (rIOC | 9)
-#define TCRIOMBIS (rIOC | 10)
-#define TCRIOMBIC (rIOC | 11)
-#define TCRIOTRIAD (rIOC | 12)
-#define TCRIOTSTATE (rIOC | 13)
-
-/*
-** 15.10.1998 ARG - ESIL 0761 part fix
-** Add RIO ioctls for manipulating RTS and CTS flow control, (as LynxOS
-** appears to not support hardware flow control).
-*/
-#define TCRIOCTSFLOWEN (rIOC | 14) /* enable CTS flow control */
-#define TCRIOCTSFLOWDIS (rIOC | 15) /* disable CTS flow control */
-#define TCRIORTSFLOWEN (rIOC | 16) /* enable RTS flow control */
-#define TCRIORTSFLOWDIS (rIOC | 17) /* disable RTS flow control */
-
-/*
-** 09.12.1998 ARG - ESIL 0776 part fix
-** Definition for 'RIOC' also appears in daemon.h, so we'd better do a
-** #ifndef here first.
-** 'RIO_QUICK_CHECK' also #define'd here as this ioctl is now
-** allowed to be used by customers.
-**
-** 05.02.1999 ARG -
-** This is what I've decied to do with ioctls etc., which are intended to be
-** invoked from users applications :
-** Anything that needs to be defined here will be removed from daemon.h, that
-** way it won't end up having to be defined/maintained in two places. The only
-** consequence of this is that this file should now be #include'd by daemon.h
-**
-** 'stats' ioctls now #define'd here as they are to be used by customers.
-*/
#define RIOC ('R'<<8)|('i'<<16)|('o'<<24)
#define RIO_QUICK_CHECK (RIOC | 105)
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 1efde3b2761..fe00c7dfb64 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -22,7 +22,7 @@ config TCG_TPM
config TCG_TIS
tristate "TPM Interface Specification 1.2 Interface"
- depends on TCG_TPM
+ depends on TCG_TPM && PNPACPI
---help---
If you have a TPM security chip that is compliant with the
TCG TIS 1.2 TPM specification say Yes and it will be accessible
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 54a4c804e25..050ced247f6 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -140,7 +140,7 @@ extern int tpm_pm_resume(struct device *);
extern struct dentry ** tpm_bios_log_setup(char *);
extern void tpm_bios_log_teardown(struct dentry **);
#else
-static inline struct dentry* tpm_bios_log_setup(char *name)
+static inline struct dentry ** tpm_bios_log_setup(char *name)
{
return NULL;
}
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index b9cae9a238b..f621168f38a 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -55,7 +55,7 @@ enum tis_int_flags {
};
enum tis_defaults {
- TIS_MEM_BASE = 0xFED4000,
+ TIS_MEM_BASE = 0xFED40000,
TIS_MEM_LEN = 0x5000,
TIS_SHORT_TIMEOUT = 750, /* ms */
TIS_LONG_TIMEOUT = 2000, /* 2 sec */
diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c
index a13395e2c37..fa2ba9ebe42 100644
--- a/drivers/char/watchdog/i8xx_tco.c
+++ b/drivers/char/watchdog/i8xx_tco.c
@@ -33,11 +33,6 @@
* 82801E (C-ICH) : document number 273599-001, 273645-002,
* 82801EB (ICH5) : document number 252516-001, 252517-003,
* 82801ER (ICH5R) : document number 252516-001, 252517-003,
- * 82801FB (ICH6) : document number 301473-002, 301474-007,
- * 82801FR (ICH6R) : document number 301473-002, 301474-007,
- * 82801FBM (ICH6-M) : document number 301473-002, 301474-007,
- * 82801FW (ICH6W) : document number 301473-001, 301474-007,
- * 82801FRW (ICH6RW) : document number 301473-001, 301474-007
*
* 20000710 Nils Faerber
* Initial Version 0.01
@@ -66,6 +61,10 @@
* 20050807 Wim Van Sebroeck <wim@iguana.be>
* 0.08 Make sure that the watchdog is only "armed" when started.
* (Kernel Bug 4251)
+ * 20060416 Wim Van Sebroeck <wim@iguana.be>
+ * 0.09 Remove support for the ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW and
+ * ICH7 chipsets. (See Kernel Bug 6031 - other code will support these
+ * chipsets)
*/
/*
@@ -90,7 +89,7 @@
#include "i8xx_tco.h"
/* Module and version information */
-#define TCO_VERSION "0.08"
+#define TCO_VERSION "0.09"
#define TCO_MODULE_NAME "i8xx TCO timer"
#define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION
#define PFX TCO_MODULE_NAME ": "
@@ -391,11 +390,6 @@ static struct pci_device_id i8xx_tco_pci_tbl[] = {
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0, PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, PCI_ANY_ID, PCI_ANY_ID, },
{ 0, }, /* End of list */
};
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index 9dc54736e4e..1ea04e9b2b0 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -423,6 +423,12 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
if (tmr_atboot && started == 0) {
printk(KERN_INFO PFX "Starting Watchdog Timer\n");
s3c2410wdt_start();
+ } else if (!tmr_atboot) {
+ /* if we're not enabling the watchdog, then ensure it is
+ * disabled if it has been left running from the bootloader
+ * or other source */
+
+ s3c2410wdt_stop();
}
return 0;
diff --git a/drivers/char/watchdog/sc1200wdt.c b/drivers/char/watchdog/sc1200wdt.c
index 515ce757204..20b88f9b7be 100644
--- a/drivers/char/watchdog/sc1200wdt.c
+++ b/drivers/char/watchdog/sc1200wdt.c
@@ -377,7 +377,7 @@ static int __init sc1200wdt_init(void)
{
int ret;
- printk(banner);
+ printk("%s\n", banner);
spin_lock_init(&sc1200wdt_lock);
sema_init(&open_sem, 1);
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 956d121cb16..3e6ffcaa5af 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -74,6 +74,8 @@ static unsigned int dbs_enable; /* number of CPUs using this policy */
static DEFINE_MUTEX (dbs_mutex);
static DECLARE_WORK (dbs_work, do_dbs_timer, NULL);
+static struct workqueue_struct *dbs_workq;
+
struct dbs_tuners {
unsigned int sampling_rate;
unsigned int sampling_down_factor;
@@ -364,23 +366,29 @@ static void do_dbs_timer(void *data)
mutex_lock(&dbs_mutex);
for_each_online_cpu(i)
dbs_check_cpu(i);
- schedule_delayed_work(&dbs_work,
- usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
+ queue_delayed_work(dbs_workq, &dbs_work,
+ usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
mutex_unlock(&dbs_mutex);
}
static inline void dbs_timer_init(void)
{
INIT_WORK(&dbs_work, do_dbs_timer, NULL);
- schedule_delayed_work(&dbs_work,
- usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
+ if (!dbs_workq)
+ dbs_workq = create_singlethread_workqueue("ondemand");
+ if (!dbs_workq) {
+ printk(KERN_ERR "ondemand: Cannot initialize kernel thread\n");
+ return;
+ }
+ queue_delayed_work(dbs_workq, &dbs_work,
+ usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
return;
}
static inline void dbs_timer_exit(void)
{
- cancel_delayed_work(&dbs_work);
- return;
+ if (dbs_workq)
+ cancel_rearming_delayed_workqueue(dbs_workq, &dbs_work);
}
static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
@@ -489,8 +497,12 @@ static int __init cpufreq_gov_dbs_init(void)
static void __exit cpufreq_gov_dbs_exit(void)
{
- /* Make sure that the scheduled work is indeed not running */
- flush_scheduled_work();
+ /* Make sure that the scheduled work is indeed not running.
+ Assumes the timer has been cancelled first. */
+ if (dbs_workq) {
+ flush_workqueue(dbs_workq);
+ destroy_workqueue(dbs_workq);
+ }
cpufreq_unregister_governor(&cpufreq_gov_dbs);
}
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index 66572c5323a..fce31936e6d 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -25,6 +25,8 @@
#include <linux/slab.h>
#include "edac_mc.h"
+static int force_function_unhide;
+
#define e752x_printk(level, fmt, arg...) \
edac_printk(level, "e752x", fmt, ##arg)
@@ -782,8 +784,16 @@ static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
debugf0("%s(): mci\n", __func__);
debugf0("Starting Probe1\n");
- /* enable device 0 function 1 */
+ /* check to see if device 0 function 1 is enabled; if it isn't, we
+ * assume the BIOS has reserved it for a reason and is expecting
+ * exclusive access, we take care not to violate that assumption and
+ * fail the probe. */
pci_read_config_byte(pdev, E752X_DEVPRES1, &stat8);
+ if (!force_function_unhide && !(stat8 & (1 << 5))) {
+ printk(KERN_INFO "Contact your BIOS vendor to see if the "
+ "E752x error registers can be safely un-hidden\n");
+ goto fail;
+ }
stat8 |= (1 << 5);
pci_write_config_byte(pdev, E752X_DEVPRES1, stat8);
@@ -1063,3 +1073,8 @@ module_exit(e752x_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Linux Networx (http://lnxi.com) Tom Zimmerman\n");
MODULE_DESCRIPTION("MC support for Intel e752x memory controllers");
+
+module_param(force_function_unhide, int, 0444);
+MODULE_PARM_DESC(force_function_unhide, "if BIOS sets Dev0:Fun1 up as hidden:"
+" 1=force unhide and hope BIOS doesn't fight driver for Dev0:Fun1 access");
+
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 8bd305e47f0..a140e4536a4 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -133,6 +133,9 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
outb(ACBST_STASTR | ACBST_NEGACK, ACBST);
+
+ /* Reset the status register */
+ outb(0, ACBST);
return;
}
@@ -228,6 +231,10 @@ static void scx200_acb_poll(struct scx200_acb_iface *iface)
timeout = jiffies + POLL_TIMEOUT;
while (time_before(jiffies, timeout)) {
status = inb(ACBST);
+
+ /* Reset the status register to avoid the hang */
+ outb(0, ACBST);
+
if ((status & (ACBST_SDAST|ACBST_BER|ACBST_NEGACK)) != 0) {
scx200_acb_machine(iface, status);
return;
@@ -415,7 +422,6 @@ static int __init scx200_acb_create(const char *text, int base, int index)
struct scx200_acb_iface *iface;
struct i2c_adapter *adapter;
int rc;
- char description[64];
iface = kzalloc(sizeof(*iface), GFP_KERNEL);
if (!iface) {
@@ -434,10 +440,7 @@ static int __init scx200_acb_create(const char *text, int base, int index)
mutex_init(&iface->mutex);
- snprintf(description, sizeof(description), "%s ACCESS.bus [%s]",
- text, adapter->name);
-
- if (request_region(base, 8, description) == 0) {
+ if (!request_region(base, 8, adapter->name)) {
printk(KERN_ERR NAME ": can't allocate io 0x%x-0x%x\n",
base, base + 8-1);
rc = -EBUSY;
@@ -524,6 +527,9 @@ static int __init scx200_acb_init(void)
} else if (pci_dev_present(divil_pci))
rc = scx200_add_cs553x();
+ /* If at least one bus was created, init must succeed */
+ if (scx200_acb_list)
+ return 0;
return rc;
}
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 4961f1e764a..602797a4420 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -392,6 +392,7 @@ static struct pcmcia_device_id ide_ids[] = {
PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
+ PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
index 19222878aae..11f13778f13 100644
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -553,7 +553,7 @@ static void ohci_initialize(struct ti_ohci *ohci)
* register content.
* To actually enable physical responses is the job of our interrupt
* handler which programs the physical request filter. */
- reg_write(ohci, OHCI1394_PhyUpperBound, 0xffff0000);
+ reg_write(ohci, OHCI1394_PhyUpperBound, 0x01000000);
DBGMSG("physUpperBoundOffset=%08x",
reg_read(ohci, OHCI1394_PhyUpperBound));
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index f4206604db0..8a23fb54c69 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -42,6 +42,7 @@
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/string.h>
+#include <linux/stringify.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/fs.h>
@@ -117,7 +118,8 @@ MODULE_PARM_DESC(serialize_io, "Serialize I/O coming from scsi drivers (default
*/
static int max_sectors = SBP2_MAX_SECTORS;
module_param(max_sectors, int, 0444);
-MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = 255)");
+MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = "
+ __stringify(SBP2_MAX_SECTORS) ")");
/*
* Exclusive login to sbp2 device? In most cases, the sbp2 driver should
@@ -135,18 +137,45 @@ module_param(exclusive_login, int, 0644);
MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)");
/*
- * SCSI inquiry hack for really badly behaved sbp2 devices. Turn this on
- * if your sbp2 device is not properly handling the SCSI inquiry command.
- * This hack makes the inquiry look more like a typical MS Windows inquiry
- * by enforcing 36 byte inquiry and avoiding access to mode_sense page 8.
+ * If any of the following workarounds is required for your device to work,
+ * please submit the kernel messages logged by sbp2 to the linux1394-devel
+ * mailing list.
*
- * If force_inquiry_hack=1 is required for your device to work,
- * please submit the logged sbp2_firmware_revision value of this device to
- * the linux1394-devel mailing list.
+ * - 128kB max transfer
+ * Limit transfer size. Necessary for some old bridges.
+ *
+ * - 36 byte inquiry
+ * When scsi_mod probes the device, let the inquiry command look like that
+ * from MS Windows.
+ *
+ * - skip mode page 8
+ * Suppress sending of mode_sense for mode page 8 if the device pretends to
+ * support the SCSI Primary Block commands instead of Reduced Block Commands.
+ *
+ * - fix capacity
+ * Tell sd_mod to correct the last sector number reported by read_capacity.
+ * Avoids access beyond actual disk limits on devices with an off-by-one bug.
+ * Don't use this with devices which don't have this bug.
+ *
+ * - override internal blacklist
+ * Instead of adding to the built-in blacklist, use only the workarounds
+ * specified in the module load parameter.
+ * Useful if a blacklist entry interfered with a non-broken device.
*/
+static int sbp2_default_workarounds;
+module_param_named(workarounds, sbp2_default_workarounds, int, 0644);
+MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0"
+ ", 128kB max transfer = " __stringify(SBP2_WORKAROUND_128K_MAX_TRANS)
+ ", 36 byte inquiry = " __stringify(SBP2_WORKAROUND_INQUIRY_36)
+ ", skip mode page 8 = " __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
+ ", fix capacity = " __stringify(SBP2_WORKAROUND_FIX_CAPACITY)
+ ", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
+ ", or a combination)");
+
+/* legacy parameter */
static int force_inquiry_hack;
module_param(force_inquiry_hack, int, 0644);
-MODULE_PARM_DESC(force_inquiry_hack, "Force SCSI inquiry hack (default = 0)");
+MODULE_PARM_DESC(force_inquiry_hack, "Deprecated, use 'workarounds'");
/*
* Export information about protocols/devices supported by this driver.
@@ -266,14 +295,55 @@ static struct hpsb_protocol_driver sbp2_driver = {
};
/*
- * List of device firmwares that require the inquiry hack.
- * Yields a few false positives but did not break other devices so far.
+ * List of devices with known bugs.
+ *
+ * The firmware_revision field, masked with 0xffff00, is the best indicator
+ * for the type of bridge chip of a device. It yields a few false positives
+ * but this did not break correctly behaving devices so far.
*/
-static u32 sbp2_broken_inquiry_list[] = {
- 0x00002800, /* Stefan Richter <stefanr@s5r6.in-berlin.de> */
- /* DViCO Momobay CX-1 */
- 0x00000200 /* Andreas Plesch <plesch@fas.harvard.edu> */
- /* QPS Fire DVDBurner */
+static const struct {
+ u32 firmware_revision;
+ u32 model_id;
+ unsigned workarounds;
+} sbp2_workarounds_table[] = {
+ /* TSB42AA9 */ {
+ .firmware_revision = 0x002800,
+ .workarounds = SBP2_WORKAROUND_INQUIRY_36 |
+ SBP2_WORKAROUND_MODE_SENSE_8,
+ },
+ /* Initio bridges, actually only needed for some older ones */ {
+ .firmware_revision = 0x000200,
+ .workarounds = SBP2_WORKAROUND_INQUIRY_36,
+ },
+ /* Symbios bridge */ {
+ .firmware_revision = 0xa0b800,
+ .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
+ },
+ /*
+ * Note about the following Apple iPod blacklist entries:
+ *
+ * There are iPods (2nd gen, 3rd gen) with model_id==0. Since our
+ * matching logic treats 0 as a wildcard, we cannot match this ID
+ * without rewriting the matching routine. Fortunately these iPods
+ * do not feature the read_capacity bug according to one report.
+ * Read_capacity behaviour as well as model_id could change due to
+ * Apple-supplied firmware updates though.
+ */
+ /* iPod 4th generation */ {
+ .firmware_revision = 0x0a2700,
+ .model_id = 0x000021,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ },
+ /* iPod mini */ {
+ .firmware_revision = 0x0a2700,
+ .model_id = 0x000023,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ },
+ /* iPod Photo */ {
+ .firmware_revision = 0x0a2700,
+ .model_id = 0x00007e,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ }
};
/**************************************
@@ -765,11 +835,16 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
/* Register the status FIFO address range. We could use the same FIFO
* for targets at different nodes. However we need different FIFOs per
- * target in order to support multi-unit devices. */
+ * target in order to support multi-unit devices.
+ * The FIFO is located out of the local host controller's physical range
+ * but, if possible, within the posted write area. Status writes will
+ * then be performed as unified transactions. This slightly reduces
+ * bandwidth usage, and some Prolific based devices seem to require it.
+ */
scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace(
&sbp2_highlevel, ud->ne->host, &sbp2_ops,
sizeof(struct sbp2_status_block), sizeof(quadlet_t),
- ~0ULL, ~0ULL);
+ 0x010000000000ULL, CSR1212_ALL_SPACE_END);
if (!scsi_id->status_fifo_addr) {
SBP2_ERR("failed to allocate status FIFO address range");
goto failed_alloc;
@@ -1450,7 +1525,8 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
struct csr1212_dentry *dentry;
u64 management_agent_addr;
u32 command_set_spec_id, command_set, unit_characteristics,
- firmware_revision, workarounds;
+ firmware_revision;
+ unsigned workarounds;
int i;
SBP2_DEBUG_ENTER();
@@ -1506,12 +1582,8 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
case SBP2_FIRMWARE_REVISION_KEY:
/* Firmware revision */
firmware_revision = kv->value.immediate;
- if (force_inquiry_hack)
- SBP2_INFO("sbp2_firmware_revision = %x",
- (unsigned int)firmware_revision);
- else
- SBP2_DEBUG("sbp2_firmware_revision = %x",
- (unsigned int)firmware_revision);
+ SBP2_DEBUG("sbp2_firmware_revision = %x",
+ (unsigned int)firmware_revision);
break;
default:
@@ -1519,41 +1591,44 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
}
}
- /* This is the start of our broken device checking. We try to hack
- * around oddities and known defects. */
- workarounds = 0x0;
+ workarounds = sbp2_default_workarounds;
+ if (force_inquiry_hack) {
+ SBP2_WARN("force_inquiry_hack is deprecated. "
+ "Use parameter 'workarounds' instead.");
+ workarounds |= SBP2_WORKAROUND_INQUIRY_36;
+ }
- /* If the vendor id is 0xa0b8 (Symbios vendor id), then we have a
- * bridge with 128KB max transfer size limitation. For sanity, we
- * only voice this when the current max_sectors setting
- * exceeds the 128k limit. By default, that is not the case.
- *
- * It would be really nice if we could detect this before the scsi
- * host gets initialized. That way we can down-force the
- * max_sectors to account for it. That is not currently
- * possible. */
- if ((firmware_revision & 0xffff00) ==
- SBP2_128KB_BROKEN_FIRMWARE &&
- (max_sectors * 512) > (128*1024)) {
- SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB max transfer size.",
- NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid));
- SBP2_WARN("WARNING: Current max_sectors setting is larger than 128KB (%d sectors)!",
- max_sectors);
- workarounds |= SBP2_BREAKAGE_128K_MAX_TRANSFER;
- }
-
- /* Check for a blacklisted set of devices that require us to force
- * a 36 byte host inquiry. This can be overriden as a module param
- * (to force all hosts). */
- for (i = 0; i < ARRAY_SIZE(sbp2_broken_inquiry_list); i++) {
- if ((firmware_revision & 0xffff00) ==
- sbp2_broken_inquiry_list[i]) {
- SBP2_WARN("Node " NODE_BUS_FMT ": Using 36byte inquiry workaround",
- NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid));
- workarounds |= SBP2_BREAKAGE_INQUIRY_HACK;
- break; /* No need to continue. */
+ if (!(workarounds & SBP2_WORKAROUND_OVERRIDE))
+ for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) {
+ if (sbp2_workarounds_table[i].firmware_revision &&
+ sbp2_workarounds_table[i].firmware_revision !=
+ (firmware_revision & 0xffff00))
+ continue;
+ if (sbp2_workarounds_table[i].model_id &&
+ sbp2_workarounds_table[i].model_id != ud->model_id)
+ continue;
+ workarounds |= sbp2_workarounds_table[i].workarounds;
+ break;
}
- }
+
+ if (workarounds)
+ SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": 0x%x "
+ "(firmware_revision 0x%06x, vendor_id 0x%06x,"
+ " model_id 0x%06x)",
+ NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
+ workarounds, firmware_revision,
+ ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id,
+ ud->model_id);
+
+ /* We would need one SCSI host template for each target to adjust
+ * max_sectors on the fly, therefore warn only. */
+ if (workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
+ (max_sectors * 512) > (128 * 1024))
+ SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB "
+ "max transfer size. WARNING: Current max_sectors "
+ "setting is larger than 128KB (%d sectors)",
+ NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
+ max_sectors);
/* If this is a logical unit directory entry, process the parent
* to get the values. */
@@ -2447,19 +2522,25 @@ static int sbp2scsi_slave_alloc(struct scsi_device *sdev)
scsi_id->sdev = sdev;
- if (force_inquiry_hack ||
- scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK) {
+ if (scsi_id->workarounds & SBP2_WORKAROUND_INQUIRY_36)
sdev->inquiry_len = 36;
- sdev->skip_ms_page_8 = 1;
- }
return 0;
}
static int sbp2scsi_slave_configure(struct scsi_device *sdev)
{
+ struct scsi_id_instance_data *scsi_id =
+ (struct scsi_id_instance_data *)sdev->host->hostdata[0];
+
blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
sdev->use_10_for_rw = 1;
sdev->use_10_for_ms = 1;
+
+ if (sdev->type == TYPE_DISK &&
+ scsi_id->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)
+ sdev->skip_ms_page_8 = 1;
+ if (scsi_id->workarounds & SBP2_WORKAROUND_FIX_CAPACITY)
+ sdev->fix_capacity = 1;
return 0;
}
@@ -2603,7 +2684,9 @@ static int sbp2_module_init(void)
scsi_driver_template.cmd_per_lun = 1;
}
- /* Set max sectors (module load option). Default is 255 sectors. */
+ if (sbp2_default_workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
+ (max_sectors * 512) > (128 * 1024))
+ max_sectors = 128 * 1024 / 512;
scsi_driver_template.max_sectors = max_sectors;
/* Register our high level driver with 1394 stack */
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index e2d357a9ea3..f4ccc9d0fba 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -227,11 +227,6 @@ struct sbp2_status_block {
#define SBP2_SW_VERSION_ENTRY 0x00010483
/*
- * Other misc defines
- */
-#define SBP2_128KB_BROKEN_FIRMWARE 0xa0b800
-
-/*
* SCSI specific stuff
*/
@@ -239,6 +234,13 @@ struct sbp2_status_block {
#define SBP2_MAX_SECTORS 255 /* Max sectors supported */
#define SBP2_MAX_CMDS 8 /* This should be safe */
+/* Flags for detected oddities and brokeness */
+#define SBP2_WORKAROUND_128K_MAX_TRANS 0x1
+#define SBP2_WORKAROUND_INQUIRY_36 0x2
+#define SBP2_WORKAROUND_MODE_SENSE_8 0x4
+#define SBP2_WORKAROUND_FIX_CAPACITY 0x8
+#define SBP2_WORKAROUND_OVERRIDE 0x100
+
/* This is the two dma types we use for cmd_dma below */
enum cmd_dma_types {
CMD_DMA_NONE,
@@ -268,10 +270,6 @@ struct sbp2_command_info {
};
-/* A list of flags for detected oddities and brokeness. */
-#define SBP2_BREAKAGE_128K_MAX_TRANSFER 0x1
-#define SBP2_BREAKAGE_INQUIRY_HACK 0x2
-
struct sbp2scsi_host_info;
/*
@@ -345,7 +343,7 @@ struct scsi_id_instance_data {
struct Scsi_Host *scsi_host;
/* Device specific workarounds/brokeness */
- u32 workarounds;
+ unsigned workarounds;
};
/* Sbp2 host data structure (one per IEEE1394 host) */
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 7cfedb8d9bc..86fee43502c 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -34,6 +34,8 @@
*
* $Id: cm.c 2821 2005-07-08 17:07:28Z sean.hefty $
*/
+
+#include <linux/completion.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/idr.h>
@@ -122,7 +124,7 @@ struct cm_id_private {
struct rb_node service_node;
struct rb_node sidr_id_node;
spinlock_t lock; /* Do not acquire inside cm.lock */
- wait_queue_head_t wait;
+ struct completion comp;
atomic_t refcount;
struct ib_mad_send_buf *msg;
@@ -159,7 +161,7 @@ static void cm_work_handler(void *data);
static inline void cm_deref_id(struct cm_id_private *cm_id_priv)
{
if (atomic_dec_and_test(&cm_id_priv->refcount))
- wake_up(&cm_id_priv->wait);
+ complete(&cm_id_priv->comp);
}
static int cm_alloc_msg(struct cm_id_private *cm_id_priv,
@@ -559,7 +561,7 @@ struct ib_cm_id *ib_create_cm_id(struct ib_device *device,
goto error;
spin_lock_init(&cm_id_priv->lock);
- init_waitqueue_head(&cm_id_priv->wait);
+ init_completion(&cm_id_priv->comp);
INIT_LIST_HEAD(&cm_id_priv->work_list);
atomic_set(&cm_id_priv->work_count, -1);
atomic_set(&cm_id_priv->refcount, 1);
@@ -724,8 +726,8 @@ retest:
}
cm_free_id(cm_id->local_id);
- atomic_dec(&cm_id_priv->refcount);
- wait_event(cm_id_priv->wait, !atomic_read(&cm_id_priv->refcount));
+ cm_deref_id(cm_id_priv);
+ wait_for_completion(&cm_id_priv->comp);
while ((work = cm_dequeue_work(cm_id_priv)) != NULL)
cm_free_work(work);
if (cm_id_priv->private_data && cm_id_priv->private_data_len)
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index 469b6923a2e..5ad41a64314 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -352,7 +352,7 @@ struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device,
INIT_WORK(&mad_agent_priv->local_work, local_completions,
mad_agent_priv);
atomic_set(&mad_agent_priv->refcount, 1);
- init_waitqueue_head(&mad_agent_priv->wait);
+ init_completion(&mad_agent_priv->comp);
return &mad_agent_priv->agent;
@@ -467,7 +467,7 @@ struct ib_mad_agent *ib_register_mad_snoop(struct ib_device *device,
mad_snoop_priv->agent.qp = port_priv->qp_info[qpn].qp;
mad_snoop_priv->agent.port_num = port_num;
mad_snoop_priv->mad_snoop_flags = mad_snoop_flags;
- init_waitqueue_head(&mad_snoop_priv->wait);
+ init_completion(&mad_snoop_priv->comp);
mad_snoop_priv->snoop_index = register_snoop_agent(
&port_priv->qp_info[qpn],
mad_snoop_priv);
@@ -486,6 +486,18 @@ error1:
}
EXPORT_SYMBOL(ib_register_mad_snoop);
+static inline void deref_mad_agent(struct ib_mad_agent_private *mad_agent_priv)
+{
+ if (atomic_dec_and_test(&mad_agent_priv->refcount))
+ complete(&mad_agent_priv->comp);
+}
+
+static inline void deref_snoop_agent(struct ib_mad_snoop_private *mad_snoop_priv)
+{
+ if (atomic_dec_and_test(&mad_snoop_priv->refcount))
+ complete(&mad_snoop_priv->comp);
+}
+
static void unregister_mad_agent(struct ib_mad_agent_private *mad_agent_priv)
{
struct ib_mad_port_private *port_priv;
@@ -509,9 +521,8 @@ static void unregister_mad_agent(struct ib_mad_agent_private *mad_agent_priv)
flush_workqueue(port_priv->wq);
ib_cancel_rmpp_recvs(mad_agent_priv);
- atomic_dec(&mad_agent_priv->refcount);
- wait_event(mad_agent_priv->wait,
- !atomic_read(&mad_agent_priv->refcount));
+ deref_mad_agent(mad_agent_priv);
+ wait_for_completion(&mad_agent_priv->comp);
kfree(mad_agent_priv->reg_req);
ib_dereg_mr(mad_agent_priv->agent.mr);
@@ -529,9 +540,8 @@ static void unregister_mad_snoop(struct ib_mad_snoop_private *mad_snoop_priv)
atomic_dec(&qp_info->snoop_count);
spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
- atomic_dec(&mad_snoop_priv->refcount);
- wait_event(mad_snoop_priv->wait,
- !atomic_read(&mad_snoop_priv->refcount));
+ deref_snoop_agent(mad_snoop_priv);
+ wait_for_completion(&mad_snoop_priv->comp);
kfree(mad_snoop_priv);
}
@@ -600,8 +610,7 @@ static void snoop_send(struct ib_mad_qp_info *qp_info,
spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
mad_snoop_priv->agent.snoop_handler(&mad_snoop_priv->agent,
send_buf, mad_send_wc);
- if (atomic_dec_and_test(&mad_snoop_priv->refcount))
- wake_up(&mad_snoop_priv->wait);
+ deref_snoop_agent(mad_snoop_priv);
spin_lock_irqsave(&qp_info->snoop_lock, flags);
}
spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
@@ -626,8 +635,7 @@ static void snoop_recv(struct ib_mad_qp_info *qp_info,
spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
mad_snoop_priv->agent.recv_handler(&mad_snoop_priv->agent,
mad_recv_wc);
- if (atomic_dec_and_test(&mad_snoop_priv->refcount))
- wake_up(&mad_snoop_priv->wait);
+ deref_snoop_agent(mad_snoop_priv);
spin_lock_irqsave(&qp_info->snoop_lock, flags);
}
spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
@@ -968,8 +976,7 @@ void ib_free_send_mad(struct ib_mad_send_buf *send_buf)
free_send_rmpp_list(mad_send_wr);
kfree(send_buf->mad);
- if (atomic_dec_and_test(&mad_agent_priv->refcount))
- wake_up(&mad_agent_priv->wait);
+ deref_mad_agent(mad_agent_priv);
}
EXPORT_SYMBOL(ib_free_send_mad);
@@ -1757,8 +1764,7 @@ static void ib_mad_complete_recv(struct ib_mad_agent_private *mad_agent_priv,
mad_recv_wc = ib_process_rmpp_recv_wc(mad_agent_priv,
mad_recv_wc);
if (!mad_recv_wc) {
- if (atomic_dec_and_test(&mad_agent_priv->refcount))
- wake_up(&mad_agent_priv->wait);
+ deref_mad_agent(mad_agent_priv);
return;
}
}
@@ -1770,8 +1776,7 @@ static void ib_mad_complete_recv(struct ib_mad_agent_private *mad_agent_priv,
if (!mad_send_wr) {
spin_unlock_irqrestore(&mad_agent_priv->lock, flags);
ib_free_recv_mad(mad_recv_wc);
- if (atomic_dec_and_test(&mad_agent_priv->refcount))
- wake_up(&mad_agent_priv->wait);
+ deref_mad_agent(mad_agent_priv);
return;
}
ib_mark_mad_done(mad_send_wr);
@@ -1790,8 +1795,7 @@ static void ib_mad_complete_recv(struct ib_mad_agent_private *mad_agent_priv,
} else {
mad_agent_priv->agent.recv_handler(&mad_agent_priv->agent,
mad_recv_wc);
- if (atomic_dec_and_test(&mad_agent_priv->refcount))
- wake_up(&mad_agent_priv->wait);
+ deref_mad_agent(mad_agent_priv);
}
}
@@ -2021,8 +2025,7 @@ void ib_mad_complete_send_wr(struct ib_mad_send_wr_private *mad_send_wr,
mad_send_wc);
/* Release reference on agent taken when sending */
- if (atomic_dec_and_test(&mad_agent_priv->refcount))
- wake_up(&mad_agent_priv->wait);
+ deref_mad_agent(mad_agent_priv);
return;
done:
spin_unlock_irqrestore(&mad_agent_priv->lock, flags);
diff --git a/drivers/infiniband/core/mad_priv.h b/drivers/infiniband/core/mad_priv.h
index 6c9c133d71e..b4fa28d3160 100644
--- a/drivers/infiniband/core/mad_priv.h
+++ b/drivers/infiniband/core/mad_priv.h
@@ -37,6 +37,7 @@
#ifndef __IB_MAD_PRIV_H__
#define __IB_MAD_PRIV_H__
+#include <linux/completion.h>
#include <linux/pci.h>
#include <linux/kthread.h>
#include <linux/workqueue.h>
@@ -108,7 +109,7 @@ struct ib_mad_agent_private {
struct list_head rmpp_list;
atomic_t refcount;
- wait_queue_head_t wait;
+ struct completion comp;
};
struct ib_mad_snoop_private {
@@ -117,7 +118,7 @@ struct ib_mad_snoop_private {
int snoop_index;
int mad_snoop_flags;
atomic_t refcount;
- wait_queue_head_t wait;
+ struct completion comp;
};
struct ib_mad_send_wr_private {
diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c
index dfd4e588ce0..d4704e054e3 100644
--- a/drivers/infiniband/core/mad_rmpp.c
+++ b/drivers/infiniband/core/mad_rmpp.c
@@ -49,7 +49,7 @@ struct mad_rmpp_recv {
struct list_head list;
struct work_struct timeout_work;
struct work_struct cleanup_work;
- wait_queue_head_t wait;
+ struct completion comp;
enum rmpp_state state;
spinlock_t lock;
atomic_t refcount;
@@ -69,10 +69,16 @@ struct mad_rmpp_recv {
u8 method;
};
+static inline void deref_rmpp_recv(struct mad_rmpp_recv *rmpp_recv)
+{
+ if (atomic_dec_and_test(&rmpp_recv->refcount))
+ complete(&rmpp_recv->comp);
+}
+
static void destroy_rmpp_recv(struct mad_rmpp_recv *rmpp_recv)
{
- atomic_dec(&rmpp_recv->refcount);
- wait_event(rmpp_recv->wait, !atomic_read(&rmpp_recv->refcount));
+ deref_rmpp_recv(rmpp_recv);
+ wait_for_completion(&rmpp_recv->comp);
ib_destroy_ah(rmpp_recv->ah);
kfree(rmpp_recv);
}
@@ -253,7 +259,7 @@ create_rmpp_recv(struct ib_mad_agent_private *agent,
goto error;
rmpp_recv->agent = agent;
- init_waitqueue_head(&rmpp_recv->wait);
+ init_completion(&rmpp_recv->comp);
INIT_WORK(&rmpp_recv->timeout_work, recv_timeout_handler, rmpp_recv);
INIT_WORK(&rmpp_recv->cleanup_work, recv_cleanup_handler, rmpp_recv);
spin_lock_init(&rmpp_recv->lock);
@@ -279,12 +285,6 @@ error: kfree(rmpp_recv);
return NULL;
}
-static inline void deref_rmpp_recv(struct mad_rmpp_recv *rmpp_recv)
-{
- if (atomic_dec_and_test(&rmpp_recv->refcount))
- wake_up(&rmpp_recv->wait);
-}
-
static struct mad_rmpp_recv *
find_rmpp_recv(struct ib_mad_agent_private *agent,
struct ib_mad_recv_wc *mad_recv_wc)
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 15121cb5a1f..21f9282c1b2 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -336,7 +336,7 @@ static ssize_t show_pma_counter(struct ib_port *p, struct port_attribute *attr,
switch (width) {
case 4:
ret = sprintf(buf, "%u\n", (out_mad->data[40 + offset / 8] >>
- (offset % 4)) & 0xf);
+ (4 - (offset % 8))) & 0xf);
break;
case 8:
ret = sprintf(buf, "%u\n", out_mad->data[40 + offset / 8]);
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index f6a05965a4e..9164a09b6cc 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -32,6 +32,8 @@
*
* $Id: ucm.c 2594 2005-06-13 19:46:02Z libor $
*/
+
+#include <linux/completion.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/module.h>
@@ -72,7 +74,7 @@ struct ib_ucm_file {
struct ib_ucm_context {
int id;
- wait_queue_head_t wait;
+ struct completion comp;
atomic_t ref;
int events_reported;
@@ -138,7 +140,7 @@ static struct ib_ucm_context *ib_ucm_ctx_get(struct ib_ucm_file *file, int id)
static void ib_ucm_ctx_put(struct ib_ucm_context *ctx)
{
if (atomic_dec_and_test(&ctx->ref))
- wake_up(&ctx->wait);
+ complete(&ctx->comp);
}
static inline int ib_ucm_new_cm_id(int event)
@@ -178,7 +180,7 @@ static struct ib_ucm_context *ib_ucm_ctx_alloc(struct ib_ucm_file *file)
return NULL;
atomic_set(&ctx->ref, 1);
- init_waitqueue_head(&ctx->wait);
+ init_completion(&ctx->comp);
ctx->file = file;
INIT_LIST_HEAD(&ctx->events);
@@ -586,8 +588,8 @@ static ssize_t ib_ucm_destroy_id(struct ib_ucm_file *file,
if (IS_ERR(ctx))
return PTR_ERR(ctx);
- atomic_dec(&ctx->ref);
- wait_event(ctx->wait, !atomic_read(&ctx->ref));
+ ib_ucm_ctx_put(ctx);
+ wait_for_completion(&ctx->comp);
/* No new events will be generated after destroying the cm_id. */
ib_destroy_cm_id(ctx->cm_id);
diff --git a/drivers/infiniband/core/uverbs_mem.c b/drivers/infiniband/core/uverbs_mem.c
index 36a32c31566..efe147dbeb4 100644
--- a/drivers/infiniband/core/uverbs_mem.c
+++ b/drivers/infiniband/core/uverbs_mem.c
@@ -211,8 +211,10 @@ void ib_umem_release_on_close(struct ib_device *dev, struct ib_umem *umem)
*/
work = kmalloc(sizeof *work, GFP_KERNEL);
- if (!work)
+ if (!work) {
+ mmput(mm);
return;
+ }
INIT_WORK(&work->work, ib_umem_account, work);
work->mm = mm;
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 398add4d4cb..3697edafd6d 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -116,10 +116,9 @@ static int __devinit ipath_init_one(struct pci_dev *,
#define PCI_DEVICE_ID_INFINIPATH_PE800 0x10
static const struct pci_device_id ipath_pci_tbl[] = {
- {PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE,
- PCI_DEVICE_ID_INFINIPATH_HT)},
- {PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE,
- PCI_DEVICE_ID_INFINIPATH_PE800)},
+ { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) },
+ { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_PE800) },
+ { 0, }
};
MODULE_DEVICE_TABLE(pci, ipath_pci_tbl);
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c
index 1985b5dfa48..798e13e14fa 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.c
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.c
@@ -182,7 +182,7 @@ struct mthca_cmd_context {
u8 status;
};
-static int fw_cmd_doorbell = 1;
+static int fw_cmd_doorbell = 0;
module_param(fw_cmd_doorbell, int, 0644);
MODULE_PARM_DESC(fw_cmd_doorbell, "post FW commands through doorbell page if nonzero "
"(and supported by FW)");
diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c
index 312cf90731e..205854e9c66 100644
--- a/drivers/infiniband/hw/mthca/mthca_cq.c
+++ b/drivers/infiniband/hw/mthca/mthca_cq.c
@@ -238,9 +238,9 @@ void mthca_cq_event(struct mthca_dev *dev, u32 cqn,
spin_lock(&dev->cq_table.lock);
cq = mthca_array_get(&dev->cq_table.cq, cqn & (dev->limits.num_cqs - 1));
-
if (cq)
- atomic_inc(&cq->refcount);
+ ++cq->refcount;
+
spin_unlock(&dev->cq_table.lock);
if (!cq) {
@@ -254,8 +254,10 @@ void mthca_cq_event(struct mthca_dev *dev, u32 cqn,
if (cq->ibcq.event_handler)
cq->ibcq.event_handler(&event, cq->ibcq.cq_context);
- if (atomic_dec_and_test(&cq->refcount))
+ spin_lock(&dev->cq_table.lock);
+ if (!--cq->refcount)
wake_up(&cq->wait);
+ spin_unlock(&dev->cq_table.lock);
}
static inline int is_recv_cqe(struct mthca_cqe *cqe)
@@ -267,23 +269,13 @@ static inline int is_recv_cqe(struct mthca_cqe *cqe)
return !(cqe->is_send & 0x80);
}
-void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn,
+void mthca_cq_clean(struct mthca_dev *dev, struct mthca_cq *cq, u32 qpn,
struct mthca_srq *srq)
{
- struct mthca_cq *cq;
struct mthca_cqe *cqe;
u32 prod_index;
int nfreed = 0;
- spin_lock_irq(&dev->cq_table.lock);
- cq = mthca_array_get(&dev->cq_table.cq, cqn & (dev->limits.num_cqs - 1));
- if (cq)
- atomic_inc(&cq->refcount);
- spin_unlock_irq(&dev->cq_table.lock);
-
- if (!cq)
- return;
-
spin_lock_irq(&cq->lock);
/*
@@ -301,7 +293,7 @@ void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn,
if (0)
mthca_dbg(dev, "Cleaning QPN %06x from CQN %06x; ci %d, pi %d\n",
- qpn, cqn, cq->cons_index, prod_index);
+ qpn, cq->cqn, cq->cons_index, prod_index);
/*
* Now sweep backwards through the CQ, removing CQ entries
@@ -325,8 +317,6 @@ void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn,
}
spin_unlock_irq(&cq->lock);
- if (atomic_dec_and_test(&cq->refcount))
- wake_up(&cq->wait);
}
void mthca_cq_resize_copy_cqes(struct mthca_cq *cq)
@@ -821,7 +811,7 @@ int mthca_init_cq(struct mthca_dev *dev, int nent,
}
spin_lock_init(&cq->lock);
- atomic_set(&cq->refcount, 1);
+ cq->refcount = 1;
init_waitqueue_head(&cq->wait);
memset(cq_context, 0, sizeof *cq_context);
@@ -896,6 +886,17 @@ err_out:
return err;
}
+static inline int get_cq_refcount(struct mthca_dev *dev, struct mthca_cq *cq)
+{
+ int c;
+
+ spin_lock_irq(&dev->cq_table.lock);
+ c = cq->refcount;
+ spin_unlock_irq(&dev->cq_table.lock);
+
+ return c;
+}
+
void mthca_free_cq(struct mthca_dev *dev,
struct mthca_cq *cq)
{
@@ -929,6 +930,7 @@ void mthca_free_cq(struct mthca_dev *dev,
spin_lock_irq(&dev->cq_table.lock);
mthca_array_clear(&dev->cq_table.cq,
cq->cqn & (dev->limits.num_cqs - 1));
+ --cq->refcount;
spin_unlock_irq(&dev->cq_table.lock);
if (dev->mthca_flags & MTHCA_FLAG_MSI_X)
@@ -936,8 +938,7 @@ void mthca_free_cq(struct mthca_dev *dev,
else
synchronize_irq(dev->pdev->irq);
- atomic_dec(&cq->refcount);
- wait_event(cq->wait, !atomic_read(&cq->refcount));
+ wait_event(cq->wait, !get_cq_refcount(dev, cq));
if (cq->is_kernel) {
mthca_free_cq_buf(dev, &cq->buf, cq->ibcq.cqe);
diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h
index 4c1dcb4c182..f8160b8de09 100644
--- a/drivers/infiniband/hw/mthca/mthca_dev.h
+++ b/drivers/infiniband/hw/mthca/mthca_dev.h
@@ -496,7 +496,7 @@ void mthca_free_cq(struct mthca_dev *dev,
void mthca_cq_completion(struct mthca_dev *dev, u32 cqn);
void mthca_cq_event(struct mthca_dev *dev, u32 cqn,
enum ib_event_type event_type);
-void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn,
+void mthca_cq_clean(struct mthca_dev *dev, struct mthca_cq *cq, u32 qpn,
struct mthca_srq *srq);
void mthca_cq_resize_copy_cqes(struct mthca_cq *cq);
int mthca_alloc_cq_buf(struct mthca_dev *dev, struct mthca_cq_buf *buf, int nent);
diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c
index 25e1c1db9a4..a486dec1707 100644
--- a/drivers/infiniband/hw/mthca/mthca_mr.c
+++ b/drivers/infiniband/hw/mthca/mthca_mr.c
@@ -761,6 +761,7 @@ void mthca_arbel_fmr_unmap(struct mthca_dev *dev, struct mthca_fmr *fmr)
int __devinit mthca_init_mr_table(struct mthca_dev *dev)
{
+ unsigned long addr;
int err, i;
err = mthca_alloc_init(&dev->mr_table.mpt_alloc,
@@ -796,9 +797,12 @@ int __devinit mthca_init_mr_table(struct mthca_dev *dev)
goto err_fmr_mpt;
}
+ addr = pci_resource_start(dev->pdev, 4) +
+ ((pci_resource_len(dev->pdev, 4) - 1) &
+ dev->mr_table.mpt_base);
+
dev->mr_table.tavor_fmr.mpt_base =
- ioremap(dev->mr_table.mpt_base,
- (1 << i) * sizeof (struct mthca_mpt_entry));
+ ioremap(addr, (1 << i) * sizeof(struct mthca_mpt_entry));
if (!dev->mr_table.tavor_fmr.mpt_base) {
mthca_warn(dev, "MPT ioremap for FMR failed.\n");
@@ -806,9 +810,12 @@ int __devinit mthca_init_mr_table(struct mthca_dev *dev)
goto err_fmr_mpt;
}
+ addr = pci_resource_start(dev->pdev, 4) +
+ ((pci_resource_len(dev->pdev, 4) - 1) &
+ dev->mr_table.mtt_base);
+
dev->mr_table.tavor_fmr.mtt_base =
- ioremap(dev->mr_table.mtt_base,
- (1 << i) * MTHCA_MTT_SEG_SIZE);
+ ioremap(addr, (1 << i) * MTHCA_MTT_SEG_SIZE);
if (!dev->mr_table.tavor_fmr.mtt_base) {
mthca_warn(dev, "MTT ioremap for FMR failed.\n");
err = -ENOMEM;
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.h b/drivers/infiniband/hw/mthca/mthca_provider.h
index 6676a786d69..179a8f610d0 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.h
+++ b/drivers/infiniband/hw/mthca/mthca_provider.h
@@ -139,11 +139,12 @@ struct mthca_ah {
* a qp may be locked, with the send cq locked first. No other
* nesting should be done.
*
- * Each struct mthca_cq/qp also has an atomic_t ref count. The
- * pointer from the cq/qp_table to the struct counts as one reference.
- * This reference also is good for access through the consumer API, so
- * modifying the CQ/QP etc doesn't need to take another reference.
- * Access because of a completion being polled does need a reference.
+ * Each struct mthca_cq/qp also has an ref count, protected by the
+ * corresponding table lock. The pointer from the cq/qp_table to the
+ * struct counts as one reference. This reference also is good for
+ * access through the consumer API, so modifying the CQ/QP etc doesn't
+ * need to take another reference. Access to a QP because of a
+ * completion being polled does not need a reference either.
*
* Finally, each struct mthca_cq/qp has a wait_queue_head_t for the
* destroy function to sleep on.
@@ -159,8 +160,9 @@ struct mthca_ah {
* - decrement ref count; if zero, wake up waiters
*
* To destroy a CQ/QP, we can do the following:
- * - lock cq/qp_table, remove pointer, unlock cq/qp_table lock
- * - decrement ref count
+ * - lock cq/qp_table
+ * - remove pointer and decrement ref count
+ * - unlock cq/qp_table lock
* - wait_event until ref count is zero
*
* It is the consumer's responsibilty to make sure that no QP
@@ -197,7 +199,7 @@ struct mthca_cq_resize {
struct mthca_cq {
struct ib_cq ibcq;
spinlock_t lock;
- atomic_t refcount;
+ int refcount;
int cqn;
u32 cons_index;
struct mthca_cq_buf buf;
@@ -217,7 +219,7 @@ struct mthca_cq {
struct mthca_srq {
struct ib_srq ibsrq;
spinlock_t lock;
- atomic_t refcount;
+ int refcount;
int srqn;
int max;
int max_gs;
@@ -254,7 +256,7 @@ struct mthca_wq {
struct mthca_qp {
struct ib_qp ibqp;
- atomic_t refcount;
+ int refcount;
u32 qpn;
int is_direct;
u8 port; /* for SQP and memfree use only */
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index f37b0e36732..07c13be07a4 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -240,7 +240,7 @@ void mthca_qp_event(struct mthca_dev *dev, u32 qpn,
spin_lock(&dev->qp_table.lock);
qp = mthca_array_get(&dev->qp_table.qp, qpn & (dev->limits.num_qps - 1));
if (qp)
- atomic_inc(&qp->refcount);
+ ++qp->refcount;
spin_unlock(&dev->qp_table.lock);
if (!qp) {
@@ -257,8 +257,10 @@ void mthca_qp_event(struct mthca_dev *dev, u32 qpn,
if (qp->ibqp.event_handler)
qp->ibqp.event_handler(&event, qp->ibqp.qp_context);
- if (atomic_dec_and_test(&qp->refcount))
+ spin_lock(&dev->qp_table.lock);
+ if (!--qp->refcount)
wake_up(&qp->wait);
+ spin_unlock(&dev->qp_table.lock);
}
static int to_mthca_state(enum ib_qp_state ib_state)
@@ -833,10 +835,10 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask)
* entries and reinitialize the QP.
*/
if (new_state == IB_QPS_RESET && !qp->ibqp.uobject) {
- mthca_cq_clean(dev, to_mcq(qp->ibqp.send_cq)->cqn, qp->qpn,
+ mthca_cq_clean(dev, to_mcq(qp->ibqp.send_cq), qp->qpn,
qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL);
if (qp->ibqp.send_cq != qp->ibqp.recv_cq)
- mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq)->cqn, qp->qpn,
+ mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq), qp->qpn,
qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL);
mthca_wq_init(&qp->sq);
@@ -1096,7 +1098,7 @@ static int mthca_alloc_qp_common(struct mthca_dev *dev,
int ret;
int i;
- atomic_set(&qp->refcount, 1);
+ qp->refcount = 1;
init_waitqueue_head(&qp->wait);
qp->state = IB_QPS_RESET;
qp->atomic_rd_en = 0;
@@ -1318,6 +1320,17 @@ int mthca_alloc_sqp(struct mthca_dev *dev,
return err;
}
+static inline int get_qp_refcount(struct mthca_dev *dev, struct mthca_qp *qp)
+{
+ int c;
+
+ spin_lock_irq(&dev->qp_table.lock);
+ c = qp->refcount;
+ spin_unlock_irq(&dev->qp_table.lock);
+
+ return c;
+}
+
void mthca_free_qp(struct mthca_dev *dev,
struct mthca_qp *qp)
{
@@ -1339,14 +1352,14 @@ void mthca_free_qp(struct mthca_dev *dev,
spin_lock(&dev->qp_table.lock);
mthca_array_clear(&dev->qp_table.qp,
qp->qpn & (dev->limits.num_qps - 1));
+ --qp->refcount;
spin_unlock(&dev->qp_table.lock);
if (send_cq != recv_cq)
spin_unlock(&recv_cq->lock);
spin_unlock_irq(&send_cq->lock);
- atomic_dec(&qp->refcount);
- wait_event(qp->wait, !atomic_read(&qp->refcount));
+ wait_event(qp->wait, !get_qp_refcount(dev, qp));
if (qp->state != IB_QPS_RESET)
mthca_MODIFY_QP(dev, qp->state, IB_QPS_RESET, qp->qpn, 0,
@@ -1358,10 +1371,10 @@ void mthca_free_qp(struct mthca_dev *dev,
* unref the mem-free tables and free the QPN in our table.
*/
if (!qp->ibqp.uobject) {
- mthca_cq_clean(dev, to_mcq(qp->ibqp.send_cq)->cqn, qp->qpn,
+ mthca_cq_clean(dev, to_mcq(qp->ibqp.send_cq), qp->qpn,
qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL);
if (qp->ibqp.send_cq != qp->ibqp.recv_cq)
- mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq)->cqn, qp->qpn,
+ mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq), qp->qpn,
qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL);
mthca_free_memfree(dev, qp);
@@ -1714,23 +1727,7 @@ int mthca_tavor_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
ind = qp->rq.next_ind;
- for (nreq = 0; wr; ++nreq, wr = wr->next) {
- if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
- nreq = 0;
-
- doorbell[0] = cpu_to_be32((qp->rq.next_ind << qp->rq.wqe_shift) | size0);
- doorbell[1] = cpu_to_be32(qp->qpn << 8);
-
- wmb();
-
- mthca_write64(doorbell,
- dev->kar + MTHCA_RECEIVE_DOORBELL,
- MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
-
- qp->rq.head += MTHCA_TAVOR_MAX_WQES_PER_RECV_DB;
- size0 = 0;
- }
-
+ for (nreq = 0; wr; wr = wr->next) {
if (mthca_wq_overflow(&qp->rq, nreq, qp->ibqp.recv_cq)) {
mthca_err(dev, "RQ %06x full (%u head, %u tail,"
" %d max, %d nreq)\n", qp->qpn,
@@ -1784,6 +1781,23 @@ int mthca_tavor_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
++ind;
if (unlikely(ind >= qp->rq.max))
ind -= qp->rq.max;
+
+ ++nreq;
+ if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
+ nreq = 0;
+
+ doorbell[0] = cpu_to_be32((qp->rq.next_ind << qp->rq.wqe_shift) | size0);
+ doorbell[1] = cpu_to_be32(qp->qpn << 8);
+
+ wmb();
+
+ mthca_write64(doorbell,
+ dev->kar + MTHCA_RECEIVE_DOORBELL,
+ MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
+
+ qp->rq.head += MTHCA_TAVOR_MAX_WQES_PER_RECV_DB;
+ size0 = 0;
+ }
}
out:
diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c
index adcaf85355a..1ea433291fa 100644
--- a/drivers/infiniband/hw/mthca/mthca_srq.c
+++ b/drivers/infiniband/hw/mthca/mthca_srq.c
@@ -241,7 +241,7 @@ int mthca_alloc_srq(struct mthca_dev *dev, struct mthca_pd *pd,
goto err_out_mailbox;
spin_lock_init(&srq->lock);
- atomic_set(&srq->refcount, 1);
+ srq->refcount = 1;
init_waitqueue_head(&srq->wait);
if (mthca_is_memfree(dev))
@@ -308,6 +308,17 @@ err_out:
return err;
}
+static inline int get_srq_refcount(struct mthca_dev *dev, struct mthca_srq *srq)
+{
+ int c;
+
+ spin_lock_irq(&dev->srq_table.lock);
+ c = srq->refcount;
+ spin_unlock_irq(&dev->srq_table.lock);
+
+ return c;
+}
+
void mthca_free_srq(struct mthca_dev *dev, struct mthca_srq *srq)
{
struct mthca_mailbox *mailbox;
@@ -329,10 +340,10 @@ void mthca_free_srq(struct mthca_dev *dev, struct mthca_srq *srq)
spin_lock_irq(&dev->srq_table.lock);
mthca_array_clear(&dev->srq_table.srq,
srq->srqn & (dev->limits.num_srqs - 1));
+ --srq->refcount;
spin_unlock_irq(&dev->srq_table.lock);
- atomic_dec(&srq->refcount);
- wait_event(srq->wait, !atomic_read(&srq->refcount));
+ wait_event(srq->wait, !get_srq_refcount(dev, srq));
if (!srq->ibsrq.uobject) {
mthca_free_srq_buf(dev, srq);
@@ -414,7 +425,7 @@ void mthca_srq_event(struct mthca_dev *dev, u32 srqn,
spin_lock(&dev->srq_table.lock);
srq = mthca_array_get(&dev->srq_table.srq, srqn & (dev->limits.num_srqs - 1));
if (srq)
- atomic_inc(&srq->refcount);
+ ++srq->refcount;
spin_unlock(&dev->srq_table.lock);
if (!srq) {
@@ -431,8 +442,10 @@ void mthca_srq_event(struct mthca_dev *dev, u32 srqn,
srq->ibsrq.event_handler(&event, srq->ibsrq.srq_context);
out:
- if (atomic_dec_and_test(&srq->refcount))
+ spin_lock(&dev->srq_table.lock);
+ if (!--srq->refcount)
wake_up(&srq->wait);
+ spin_unlock(&dev->srq_table.lock);
}
/*
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
index 4ca175553f9..f887780e809 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
@@ -158,10 +158,8 @@ int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey)
if (priv->pkey == pkey) {
unregister_netdev(priv->dev);
ipoib_dev_cleanup(priv->dev);
-
list_del(&priv->list);
-
- kfree(priv);
+ free_netdev(priv->dev);
ret = 0;
break;
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 5bb55742ada..9cbdffa08dc 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -340,7 +340,10 @@ static void srp_disconnect_target(struct srp_target_port *target)
/* XXX should send SRP_I_LOGOUT request */
init_completion(&target->done);
- ib_send_cm_dreq(target->cm_id, NULL, 0);
+ if (ib_send_cm_dreq(target->cm_id, NULL, 0)) {
+ printk(KERN_DEBUG PFX "Sending CM DREQ failed\n");
+ return;
+ }
wait_for_completion(&target->done);
}
@@ -351,7 +354,6 @@ static void srp_remove_work(void *target_ptr)
spin_lock_irq(target->scsi_host->host_lock);
if (target->state != SRP_TARGET_DEAD) {
spin_unlock_irq(target->scsi_host->host_lock);
- scsi_host_put(target->scsi_host);
return;
}
target->state = SRP_TARGET_REMOVED;
@@ -365,8 +367,6 @@ static void srp_remove_work(void *target_ptr)
ib_destroy_cm_id(target->cm_id);
srp_free_target_ib(target);
scsi_host_put(target->scsi_host);
- /* And another put to really free the target port... */
- scsi_host_put(target->scsi_host);
}
static int srp_connect_target(struct srp_target_port *target)
@@ -409,6 +409,34 @@ static int srp_connect_target(struct srp_target_port *target)
}
}
+static void srp_unmap_data(struct scsi_cmnd *scmnd,
+ struct srp_target_port *target,
+ struct srp_request *req)
+{
+ struct scatterlist *scat;
+ int nents;
+
+ if (!scmnd->request_buffer ||
+ (scmnd->sc_data_direction != DMA_TO_DEVICE &&
+ scmnd->sc_data_direction != DMA_FROM_DEVICE))
+ return;
+
+ /*
+ * This handling of non-SG commands can be killed when the
+ * SCSI midlayer no longer generates non-SG commands.
+ */
+ if (likely(scmnd->use_sg)) {
+ nents = scmnd->use_sg;
+ scat = scmnd->request_buffer;
+ } else {
+ nents = 1;
+ scat = &req->fake_sg;
+ }
+
+ dma_unmap_sg(target->srp_host->dev->dma_device, scat, nents,
+ scmnd->sc_data_direction);
+}
+
static int srp_reconnect_target(struct srp_target_port *target)
{
struct ib_cm_id *new_cm_id;
@@ -455,16 +483,16 @@ static int srp_reconnect_target(struct srp_target_port *target)
list_for_each_entry(req, &target->req_queue, list) {
req->scmnd->result = DID_RESET << 16;
req->scmnd->scsi_done(req->scmnd);
+ srp_unmap_data(req->scmnd, target, req);
}
target->rx_head = 0;
target->tx_head = 0;
target->tx_tail = 0;
- target->req_head = 0;
- for (i = 0; i < SRP_SQ_SIZE - 1; ++i)
- target->req_ring[i].next = i + 1;
- target->req_ring[SRP_SQ_SIZE - 1].next = -1;
+ INIT_LIST_HEAD(&target->free_reqs);
INIT_LIST_HEAD(&target->req_queue);
+ for (i = 0; i < SRP_SQ_SIZE; ++i)
+ list_add_tail(&target->req_ring[i].list, &target->free_reqs);
ret = srp_connect_target(target);
if (ret)
@@ -589,40 +617,10 @@ static int srp_map_data(struct scsi_cmnd *scmnd, struct srp_target_port *target,
return len;
}
-static void srp_unmap_data(struct scsi_cmnd *scmnd,
- struct srp_target_port *target,
- struct srp_request *req)
-{
- struct scatterlist *scat;
- int nents;
-
- if (!scmnd->request_buffer ||
- (scmnd->sc_data_direction != DMA_TO_DEVICE &&
- scmnd->sc_data_direction != DMA_FROM_DEVICE))
- return;
-
- /*
- * This handling of non-SG commands can be killed when the
- * SCSI midlayer no longer generates non-SG commands.
- */
- if (likely(scmnd->use_sg)) {
- nents = scmnd->use_sg;
- scat = scmnd->request_buffer;
- } else {
- nents = 1;
- scat = &req->fake_sg;
- }
-
- dma_unmap_sg(target->srp_host->dev->dma_device, scat, nents,
- scmnd->sc_data_direction);
-}
-
-static void srp_remove_req(struct srp_target_port *target, struct srp_request *req,
- int index)
+static void srp_remove_req(struct srp_target_port *target, struct srp_request *req)
{
- list_del(&req->list);
- req->next = target->req_head;
- target->req_head = index;
+ srp_unmap_data(req->scmnd, target, req);
+ list_move_tail(&req->list, &target->free_reqs);
}
static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp)
@@ -647,7 +645,7 @@ static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp)
req->tsk_status = rsp->data[3];
complete(&req->done);
} else {
- scmnd = req->scmnd;
+ scmnd = req->scmnd;
if (!scmnd)
printk(KERN_ERR "Null scmnd for RSP w/tag %016llx\n",
(unsigned long long) rsp->tag);
@@ -665,14 +663,11 @@ static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp)
else if (rsp->flags & (SRP_RSP_FLAG_DIOVER | SRP_RSP_FLAG_DIUNDER))
scmnd->resid = be32_to_cpu(rsp->data_in_res_cnt);
- srp_unmap_data(scmnd, target, req);
-
if (!req->tsk_mgmt) {
- req->scmnd = NULL;
scmnd->host_scribble = (void *) -1L;
scmnd->scsi_done(scmnd);
- srp_remove_req(target, req, rsp->tag & ~SRP_TAG_TSK_MGMT);
+ srp_remove_req(target, req);
} else
req->cmd_done = 1;
}
@@ -859,7 +854,6 @@ static int srp_queuecommand(struct scsi_cmnd *scmnd,
struct srp_request *req;
struct srp_iu *iu;
struct srp_cmd *cmd;
- long req_index;
int len;
if (target->state == SRP_TARGET_CONNECTING)
@@ -879,22 +873,20 @@ static int srp_queuecommand(struct scsi_cmnd *scmnd,
dma_sync_single_for_cpu(target->srp_host->dev->dma_device, iu->dma,
SRP_MAX_IU_LEN, DMA_TO_DEVICE);
- req_index = target->req_head;
+ req = list_entry(target->free_reqs.next, struct srp_request, list);
scmnd->scsi_done = done;
scmnd->result = 0;
- scmnd->host_scribble = (void *) req_index;
+ scmnd->host_scribble = (void *) (long) req->index;
cmd = iu->buf;
memset(cmd, 0, sizeof *cmd);
cmd->opcode = SRP_CMD;
cmd->lun = cpu_to_be64((u64) scmnd->device->lun << 48);
- cmd->tag = req_index;
+ cmd->tag = req->index;
memcpy(cmd->cdb, scmnd->cmnd, scmnd->cmd_len);
- req = &target->req_ring[req_index];
-
req->scmnd = scmnd;
req->cmd = iu;
req->cmd_done = 0;
@@ -919,8 +911,7 @@ static int srp_queuecommand(struct scsi_cmnd *scmnd,
goto err_unmap;
}
- target->req_head = req->next;
- list_add_tail(&req->list, &target->req_queue);
+ list_move_tail(&req->list, &target->req_queue);
return 0;
@@ -1143,30 +1134,20 @@ static int srp_cm_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event)
return 0;
}
-static int srp_send_tsk_mgmt(struct scsi_cmnd *scmnd, u8 func)
+static int srp_send_tsk_mgmt(struct srp_target_port *target,
+ struct srp_request *req, u8 func)
{
- struct srp_target_port *target = host_to_target(scmnd->device->host);
- struct srp_request *req;
struct srp_iu *iu;
struct srp_tsk_mgmt *tsk_mgmt;
- int req_index;
- int ret = FAILED;
spin_lock_irq(target->scsi_host->host_lock);
if (target->state == SRP_TARGET_DEAD ||
target->state == SRP_TARGET_REMOVED) {
- scmnd->result = DID_BAD_TARGET << 16;
+ req->scmnd->result = DID_BAD_TARGET << 16;
goto out;
}
- if (scmnd->host_scribble == (void *) -1L)
- goto out;
-
- req_index = (long) scmnd->host_scribble;
- printk(KERN_ERR "Abort for req_index %d\n", req_index);
-
- req = &target->req_ring[req_index];
init_completion(&req->done);
iu = __srp_get_tx_iu(target);
@@ -1177,10 +1158,10 @@ static int srp_send_tsk_mgmt(struct scsi_cmnd *scmnd, u8 func)
memset(tsk_mgmt, 0, sizeof *tsk_mgmt);
tsk_mgmt->opcode = SRP_TSK_MGMT;
- tsk_mgmt->lun = cpu_to_be64((u64) scmnd->device->lun << 48);
- tsk_mgmt->tag = req_index | SRP_TAG_TSK_MGMT;
+ tsk_mgmt->lun = cpu_to_be64((u64) req->scmnd->device->lun << 48);
+ tsk_mgmt->tag = req->index | SRP_TAG_TSK_MGMT;
tsk_mgmt->tsk_mgmt_func = func;
- tsk_mgmt->task_tag = req_index;
+ tsk_mgmt->task_tag = req->index;
if (__srp_post_send(target, iu, sizeof *tsk_mgmt))
goto out;
@@ -1188,37 +1169,85 @@ static int srp_send_tsk_mgmt(struct scsi_cmnd *scmnd, u8 func)
req->tsk_mgmt = iu;
spin_unlock_irq(target->scsi_host->host_lock);
+
if (!wait_for_completion_timeout(&req->done,
msecs_to_jiffies(SRP_ABORT_TIMEOUT_MS)))
- return FAILED;
- spin_lock_irq(target->scsi_host->host_lock);
+ return -1;
- if (req->cmd_done) {
- srp_remove_req(target, req, req_index);
- scmnd->scsi_done(scmnd);
- } else if (!req->tsk_status) {
- srp_remove_req(target, req, req_index);
- scmnd->result = DID_ABORT << 16;
- ret = SUCCESS;
- }
+ return 0;
out:
spin_unlock_irq(target->scsi_host->host_lock);
- return ret;
+ return -1;
+}
+
+static int srp_find_req(struct srp_target_port *target,
+ struct scsi_cmnd *scmnd,
+ struct srp_request **req)
+{
+ if (scmnd->host_scribble == (void *) -1L)
+ return -1;
+
+ *req = &target->req_ring[(long) scmnd->host_scribble];
+
+ return 0;
}
static int srp_abort(struct scsi_cmnd *scmnd)
{
+ struct srp_target_port *target = host_to_target(scmnd->device->host);
+ struct srp_request *req;
+ int ret = SUCCESS;
+
printk(KERN_ERR "SRP abort called\n");
- return srp_send_tsk_mgmt(scmnd, SRP_TSK_ABORT_TASK);
+ if (srp_find_req(target, scmnd, &req))
+ return FAILED;
+ if (srp_send_tsk_mgmt(target, req, SRP_TSK_ABORT_TASK))
+ return FAILED;
+
+ spin_lock_irq(target->scsi_host->host_lock);
+
+ if (req->cmd_done) {
+ srp_remove_req(target, req);
+ scmnd->scsi_done(scmnd);
+ } else if (!req->tsk_status) {
+ srp_remove_req(target, req);
+ scmnd->result = DID_ABORT << 16;
+ } else
+ ret = FAILED;
+
+ spin_unlock_irq(target->scsi_host->host_lock);
+
+ return ret;
}
static int srp_reset_device(struct scsi_cmnd *scmnd)
{
+ struct srp_target_port *target = host_to_target(scmnd->device->host);
+ struct srp_request *req, *tmp;
+
printk(KERN_ERR "SRP reset_device called\n");
- return srp_send_tsk_mgmt(scmnd, SRP_TSK_LUN_RESET);
+ if (srp_find_req(target, scmnd, &req))
+ return FAILED;
+ if (srp_send_tsk_mgmt(target, req, SRP_TSK_LUN_RESET))
+ return FAILED;
+ if (req->tsk_status)
+ return FAILED;
+
+ spin_lock_irq(target->scsi_host->host_lock);
+
+ list_for_each_entry_safe(req, tmp, &target->req_queue, list)
+ if (req->scmnd->device == scmnd->device) {
+ req->scmnd->result = DID_RESET << 16;
+ req->scmnd->scsi_done(req->scmnd);
+ srp_remove_req(target, req);
+ }
+
+ spin_unlock_irq(target->scsi_host->host_lock);
+
+ return SUCCESS;
}
static int srp_reset_host(struct scsi_cmnd *scmnd)
@@ -1518,10 +1547,12 @@ static ssize_t srp_create_target(struct class_device *class_dev,
INIT_WORK(&target->work, srp_reconnect_work, target);
- for (i = 0; i < SRP_SQ_SIZE - 1; ++i)
- target->req_ring[i].next = i + 1;
- target->req_ring[SRP_SQ_SIZE - 1].next = -1;
+ INIT_LIST_HEAD(&target->free_reqs);
INIT_LIST_HEAD(&target->req_queue);
+ for (i = 0; i < SRP_SQ_SIZE; ++i) {
+ target->req_ring[i].index = i;
+ list_add_tail(&target->req_ring[i].list, &target->free_reqs);
+ }
ret = srp_parse_options(buf, target);
if (ret)
diff --git a/drivers/infiniband/ulp/srp/ib_srp.h b/drivers/infiniband/ulp/srp/ib_srp.h
index bd7f7c3115d..c5cd43aae86 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.h
+++ b/drivers/infiniband/ulp/srp/ib_srp.h
@@ -101,7 +101,7 @@ struct srp_request {
*/
struct scatterlist fake_sg;
struct completion done;
- short next;
+ short index;
u8 cmd_done;
u8 tsk_status;
};
@@ -133,7 +133,7 @@ struct srp_target_port {
unsigned tx_tail;
struct srp_iu *tx_ring[SRP_SQ_SIZE + 1];
- int req_head;
+ struct list_head free_reqs;
struct list_head req_queue;
struct srp_request req_ring[SRP_SQ_SIZE];
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index 1042987856f..5013703db0e 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -17,7 +17,7 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <asm/irq.h>
+//#include <asm/irq.h>
#include <asm/arch/sharpsl.h>
#include <asm/arch/hardware.h>
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index 9b493f0becc..173c899a1fb 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -1499,7 +1499,6 @@ static int __init capi_init(void)
printk(KERN_ERR "capi20: unable to get major %d\n", capi_major);
return major_ret;
}
- capi_major = major_ret;
capi_class = class_create(THIS_MODULE, "capi");
if (IS_ERR(capi_class)) {
unregister_chrdev(capi_major, "capi20");
diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c
index bfb73fd5077..d86ab68114b 100644
--- a/drivers/isdn/gigaset/usb-gigaset.c
+++ b/drivers/isdn/gigaset/usb-gigaset.c
@@ -710,8 +710,8 @@ static int gigaset_probe(struct usb_interface *interface,
retval = -ENODEV; //FIXME
/* See if the device offered us matches what we can accept */
- if ((le16_to_cpu(udev->descriptor.idVendor != USB_M105_VENDOR_ID)) ||
- (le16_to_cpu(udev->descriptor.idProduct != USB_M105_PRODUCT_ID)))
+ if ((le16_to_cpu(udev->descriptor.idVendor) != USB_M105_VENDOR_ID) ||
+ (le16_to_cpu(udev->descriptor.idProduct) != USB_M105_PRODUCT_ID))
return -ENODEV;
/* this starts to become ascii art... */
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 3f5b6479454..626506234b7 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -4,8 +4,11 @@ menu "LED devices"
config NEW_LEDS
bool "LED Support"
help
- Say Y to enable Linux LED support. This is not related to standard
- keyboard LEDs which are controlled via the input system.
+ Say Y to enable Linux LED support. This allows control of supported
+ LEDs from both userspace and optionally, by kernel events (triggers).
+
+ This is not related to standard keyboard LEDs which are controlled
+ via the input system.
config LEDS_CLASS
tristate "LED Class Support"
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index b0b5d05fadd..c75d0ef1609 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -19,6 +19,7 @@
#include <linux/sysdev.h>
#include <linux/timer.h>
#include <linux/err.h>
+#include <linux/ctype.h>
#include <linux/leds.h>
#include "leds.h"
@@ -43,9 +44,13 @@ static ssize_t led_brightness_store(struct class_device *dev,
ssize_t ret = -EINVAL;
char *after;
unsigned long state = simple_strtoul(buf, &after, 10);
+ size_t count = after - buf;
- if (after - buf > 0) {
- ret = after - buf;
+ if (*after && isspace(*after))
+ count++;
+
+ if (count == size) {
+ ret = count;
led_set_brightness(led_cdev, state);
}
diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c
index f484b5d6dbf..fbf141ef46e 100644
--- a/drivers/leds/ledtrig-timer.c
+++ b/drivers/leds/ledtrig-timer.c
@@ -20,6 +20,7 @@
#include <linux/device.h>
#include <linux/sysdev.h>
#include <linux/timer.h>
+#include <linux/ctype.h>
#include <linux/leds.h>
#include "leds.h"
@@ -69,11 +70,15 @@ static ssize_t led_delay_on_store(struct class_device *dev, const char *buf,
int ret = -EINVAL;
char *after;
unsigned long state = simple_strtoul(buf, &after, 10);
+ size_t count = after - buf;
- if (after - buf > 0) {
+ if (*after && isspace(*after))
+ count++;
+
+ if (count == size) {
timer_data->delay_on = state;
mod_timer(&timer_data->timer, jiffies + 1);
- ret = after - buf;
+ ret = count;
}
return ret;
@@ -97,11 +102,15 @@ static ssize_t led_delay_off_store(struct class_device *dev, const char *buf,
int ret = -EINVAL;
char *after;
unsigned long state = simple_strtoul(buf, &after, 10);
+ size_t count = after - buf;
+
+ if (*after && isspace(*after))
+ count++;
- if (after - buf > 0) {
+ if (count == size) {
timer_data->delay_off = state;
mod_timer(&timer_data->timer, jiffies + 1);
- ret = after - buf;
+ ret = count;
}
return ret;
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 266414ca281..9080853fe28 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1189,7 +1189,6 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->diagPending = 0;
spin_lock_init(&ioc->diagLock);
spin_lock_init(&ioc->fc_rescan_work_lock);
- spin_lock_init(&ioc->fc_rport_lock);
spin_lock_init(&ioc->initializing_hba_lock);
/* Initialize the event logging.
@@ -5736,11 +5735,13 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
return rc;
}
+# define EVENT_DESCR_STR_SZ 100
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
static void
EventDescriptionStr(u8 event, u32 evData0, char *evStr)
{
- char *ds;
+ char *ds = NULL;
switch(event) {
case MPI_EVENT_NONE:
@@ -5777,9 +5778,9 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
ds = "Loop State(LIP) Change";
else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
- ds = "Loop State(LPE) Change"; /* ??? */
+ ds = "Loop State(LPE) Change"; /* ??? */
else
- ds = "Loop State(LPB) Change"; /* ??? */
+ ds = "Loop State(LPB) Change"; /* ??? */
break;
case MPI_EVENT_LOGOUT:
ds = "Logout";
@@ -5841,27 +5842,32 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
break;
case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
{
- char buf[50];
u8 id = (u8)(evData0);
u8 ReasonCode = (u8)(evData0 >> 16);
switch (ReasonCode) {
case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
- sprintf(buf,"SAS Device Status Change: Added: id=%d", id);
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Added: id=%d", id);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
- sprintf(buf,"SAS Device Status Change: Deleted: id=%d", id);
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Deleted: id=%d", id);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
- sprintf(buf,"SAS Device Status Change: SMART Data: id=%d", id);
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: SMART Data: id=%d",
+ id);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
- sprintf(buf,"SAS Device Status Change: No Persistancy Added: id=%d", id);
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: No Persistancy "
+ "Added: id=%d", id);
break;
default:
- sprintf(buf,"SAS Device Status Change: Unknown: id=%d", id);
- break;
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Unknown: id=%d", id);
+ break;
}
- ds = buf;
break;
}
case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
@@ -5878,41 +5884,46 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
break;
case MPI_EVENT_SAS_PHY_LINK_STATUS:
{
- char buf[50];
u8 LinkRates = (u8)(evData0 >> 8);
u8 PhyNumber = (u8)(evData0);
LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
switch (LinkRates) {
case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
- sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS PHY Link Status: Phy=%d:"
" Rate Unknown",PhyNumber);
break;
case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
- sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS PHY Link Status: Phy=%d:"
" Phy Disabled",PhyNumber);
break;
case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
- sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS PHY Link Status: Phy=%d:"
" Failed Speed Nego",PhyNumber);
break;
case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
- sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS PHY Link Status: Phy=%d:"
" Sata OOB Completed",PhyNumber);
break;
case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
- sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS PHY Link Status: Phy=%d:"
" Rate 1.5 Gbps",PhyNumber);
break;
case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
- sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS PHY Link Status: Phy=%d:"
" Rate 3.0 Gpbs",PhyNumber);
break;
default:
- sprintf(buf,"SAS PHY Link Status: Phy=%d", PhyNumber);
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS PHY Link Status: Phy=%d", PhyNumber);
break;
}
- ds = buf;
break;
}
case MPI_EVENT_SAS_DISCOVERY_ERROR:
@@ -5921,9 +5932,8 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
case MPI_EVENT_IR_RESYNC_UPDATE:
{
u8 resync_complete = (u8)(evData0 >> 16);
- char buf[40];
- sprintf(buf,"IR Resync Update: Complete = %d:",resync_complete);
- ds = buf;
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR Resync Update: Complete = %d:",resync_complete);
break;
}
case MPI_EVENT_IR2:
@@ -5976,7 +5986,8 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
ds = "Unknown";
break;
}
- strcpy(evStr,ds);
+ if (ds)
+ strncpy(evStr, ds, EVENT_DESCR_STR_SZ);
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -5998,7 +6009,7 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
int ii;
int r = 0;
int handlers = 0;
- char evStr[100];
+ char evStr[EVENT_DESCR_STR_SZ];
u8 event;
/*
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index be7e8501b53..f673cca507e 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
#define COPYRIGHT "Copyright (c) 1999-2005 " MODULEAUTHOR
#endif
-#define MPT_LINUX_VERSION_COMMON "3.03.08"
-#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.08"
+#define MPT_LINUX_VERSION_COMMON "3.03.09"
+#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.09"
#define WHAT_MAGIC_STRING "@" "(" "#" ")"
#define show_mptmod_ver(s,ver) \
@@ -489,7 +489,6 @@ typedef struct _RaidCfgData {
#define MPT_RPORT_INFO_FLAGS_REGISTERED 0x01 /* rport registered */
#define MPT_RPORT_INFO_FLAGS_MISSING 0x02 /* missing from DevPage0 scan */
-#define MPT_RPORT_INFO_FLAGS_MAPPED_VDEV 0x04 /* target mapped in vdev */
/*
* data allocated for each fc rport device
@@ -501,7 +500,6 @@ struct mptfc_rport_info
struct scsi_target *starget;
FCDevicePage0_t pg0;
u8 flags;
- u8 remap_needed;
};
/*
@@ -628,11 +626,11 @@ typedef struct _MPT_ADAPTER
struct work_struct mptscsih_persistTask;
struct list_head fc_rports;
- spinlock_t fc_rport_lock; /* list and ri flags */
spinlock_t fc_rescan_work_lock;
int fc_rescan_work_count;
struct work_struct fc_rescan_work;
-
+ char fc_rescan_work_q_name[KOBJ_NAME_LEN];
+ struct workqueue_struct *fc_rescan_work_q;
} MPT_ADAPTER;
/*
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index b343f2a68b1..856487741ef 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -341,9 +341,6 @@ mptfc_generate_rport_ids(FCDevicePage0_t *pg0, struct fc_rport_identifiers *rid)
rid->port_name = ((u64)pg0->WWPN.High) << 32 | (u64)pg0->WWPN.Low;
rid->port_id = pg0->PortIdentifier;
rid->roles = FC_RPORT_ROLE_UNKNOWN;
- rid->roles |= FC_RPORT_ROLE_FCP_TARGET;
- if (pg0->Protocol & MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR)
- rid->roles |= FC_RPORT_ROLE_FCP_INITIATOR;
return 0;
}
@@ -355,15 +352,18 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
struct fc_rport *rport;
struct mptfc_rport_info *ri;
int new_ri = 1;
- u64 pn;
- unsigned long flags;
+ u64 pn, nn;
VirtTarget *vtarget;
+ u32 roles = FC_RPORT_ROLE_UNKNOWN;
if (mptfc_generate_rport_ids(pg0, &rport_ids) < 0)
return;
+ roles |= FC_RPORT_ROLE_FCP_TARGET;
+ if (pg0->Protocol & MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR)
+ roles |= FC_RPORT_ROLE_FCP_INITIATOR;
+
/* scan list looking for a match */
- spin_lock_irqsave(&ioc->fc_rport_lock, flags);
list_for_each_entry(ri, &ioc->fc_rports, list) {
pn = (u64)ri->pg0.WWPN.High << 32 | (u64)ri->pg0.WWPN.Low;
if (pn == rport_ids.port_name) { /* match */
@@ -373,11 +373,9 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
}
}
if (new_ri) { /* allocate one */
- spin_unlock_irqrestore(&ioc->fc_rport_lock, flags);
ri = kzalloc(sizeof(struct mptfc_rport_info), GFP_KERNEL);
if (!ri)
return;
- spin_lock_irqsave(&ioc->fc_rport_lock, flags);
list_add_tail(&ri->list, &ioc->fc_rports);
}
@@ -387,14 +385,11 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
/* MPT_RPORT_INFO_FLAGS_REGISTERED - rport not previously deleted */
if (!(ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED)) {
ri->flags |= MPT_RPORT_INFO_FLAGS_REGISTERED;
- spin_unlock_irqrestore(&ioc->fc_rport_lock, flags);
rport = fc_remote_port_add(ioc->sh, channel, &rport_ids);
- spin_lock_irqsave(&ioc->fc_rport_lock, flags);
if (rport) {
ri->rport = rport;
if (new_ri) /* may have been reset by user */
rport->dev_loss_tmo = mptfc_dev_loss_tmo;
- *((struct mptfc_rport_info **)rport->dd_data) = ri;
/*
* if already mapped, remap here. If not mapped,
* target_alloc will allocate vtarget and map,
@@ -406,16 +401,21 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
vtarget->target_id = pg0->CurrentTargetID;
vtarget->bus_id = pg0->CurrentBus;
}
- ri->remap_needed = 0;
}
+ *((struct mptfc_rport_info **)rport->dd_data) = ri;
+ /* scan will be scheduled once rport becomes a target */
+ fc_remote_port_rolechg(rport,roles);
+
+ pn = (u64)ri->pg0.WWPN.High << 32 | (u64)ri->pg0.WWPN.Low;
+ nn = (u64)ri->pg0.WWNN.High << 32 | (u64)ri->pg0.WWNN.Low;
dfcprintk ((MYIOC_s_INFO_FMT
"mptfc_reg_dev.%d: %x, %llx / %llx, tid %d, "
"rport tid %d, tmo %d\n",
ioc->name,
ioc->sh->host_no,
pg0->PortIdentifier,
- pg0->WWNN,
- pg0->WWPN,
+ (unsigned long long)nn,
+ (unsigned long long)pn,
pg0->CurrentTargetID,
ri->rport->scsi_target_id,
ri->rport->dev_loss_tmo));
@@ -425,8 +425,6 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
ri = NULL;
}
}
- spin_unlock_irqrestore(&ioc->fc_rport_lock,flags);
-
}
/*
@@ -476,7 +474,6 @@ mptfc_target_alloc(struct scsi_target *starget)
vtarget->target_id = ri->pg0.CurrentTargetID;
vtarget->bus_id = ri->pg0.CurrentBus;
ri->starget = starget;
- ri->remap_needed = 0;
rc = 0;
}
}
@@ -502,10 +499,10 @@ mptfc_slave_alloc(struct scsi_device *sdev)
VirtDevice *vdev;
struct scsi_target *starget;
struct fc_rport *rport;
- unsigned long flags;
- rport = starget_to_rport(scsi_target(sdev));
+ starget = scsi_target(sdev);
+ rport = starget_to_rport(starget);
if (!rport || fc_remote_port_chkready(rport))
return -ENXIO;
@@ -519,10 +516,8 @@ mptfc_slave_alloc(struct scsi_device *sdev)
return -ENOMEM;
}
- spin_lock_irqsave(&hd->ioc->fc_rport_lock,flags);
sdev->hostdata = vdev;
- starget = scsi_target(sdev);
vtarget = starget->hostdata;
if (vtarget->num_luns == 0) {
@@ -535,14 +530,16 @@ mptfc_slave_alloc(struct scsi_device *sdev)
vdev->vtarget = vtarget;
vdev->lun = sdev->lun;
- spin_unlock_irqrestore(&hd->ioc->fc_rport_lock,flags);
-
vtarget->num_luns++;
+
#ifdef DMPT_DEBUG_FC
- {
+ {
+ u64 nn, pn;
struct mptfc_rport_info *ri;
ri = *((struct mptfc_rport_info **)rport->dd_data);
+ pn = (u64)ri->pg0.WWPN.High << 32 | (u64)ri->pg0.WWPN.Low;
+ nn = (u64)ri->pg0.WWNN.High << 32 | (u64)ri->pg0.WWNN.Low;
dfcprintk ((MYIOC_s_INFO_FMT
"mptfc_slv_alloc.%d: num_luns %d, sdev.id %d, "
"CurrentTargetID %d, %x %llx %llx\n",
@@ -550,7 +547,9 @@ mptfc_slave_alloc(struct scsi_device *sdev)
sdev->host->host_no,
vtarget->num_luns,
sdev->id, ri->pg0.CurrentTargetID,
- ri->pg0.PortIdentifier, ri->pg0.WWPN, ri->pg0.WWNN));
+ ri->pg0.PortIdentifier,
+ (unsigned long long)pn,
+ (unsigned long long)nn));
}
#endif
@@ -570,11 +569,31 @@ mptfc_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
done(SCpnt);
return 0;
}
+
+ /* dd_data is null until finished adding target */
ri = *((struct mptfc_rport_info **)rport->dd_data);
- if (unlikely(ri->remap_needed))
- return SCSI_MLQUEUE_HOST_BUSY;
+ if (unlikely(!ri)) {
+ dfcprintk ((MYIOC_s_INFO_FMT
+ "mptfc_qcmd.%d: %d:%d, dd_data is null.\n",
+ ((MPT_SCSI_HOST *) SCpnt->device->host->hostdata)->ioc->name,
+ ((MPT_SCSI_HOST *) SCpnt->device->host->hostdata)->ioc->sh->host_no,
+ SCpnt->device->id,SCpnt->device->lun));
+ SCpnt->result = DID_IMM_RETRY << 16;
+ done(SCpnt);
+ return 0;
+ }
- return mptscsih_qcmd(SCpnt,done);
+ err = mptscsih_qcmd(SCpnt,done);
+#ifdef DMPT_DEBUG_FC
+ if (unlikely(err)) {
+ dfcprintk ((MYIOC_s_INFO_FMT
+ "mptfc_qcmd.%d: %d:%d, mptscsih_qcmd returns non-zero.\n",
+ ((MPT_SCSI_HOST *) SCpnt->device->host->hostdata)->ioc->name,
+ ((MPT_SCSI_HOST *) SCpnt->device->host->hostdata)->ioc->sh->host_no,
+ SCpnt->device->id,SCpnt->device->lun));
+ }
+#endif
+ return err;
}
static void
@@ -615,18 +634,17 @@ mptfc_rescan_devices(void *arg)
MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
int ii;
int work_to_do;
+ u64 pn;
unsigned long flags;
struct mptfc_rport_info *ri;
do {
/* start by tagging all ports as missing */
- spin_lock_irqsave(&ioc->fc_rport_lock,flags);
list_for_each_entry(ri, &ioc->fc_rports, list) {
if (ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED) {
ri->flags |= MPT_RPORT_INFO_FLAGS_MISSING;
}
}
- spin_unlock_irqrestore(&ioc->fc_rport_lock,flags);
/*
* now rescan devices known to adapter,
@@ -639,33 +657,24 @@ mptfc_rescan_devices(void *arg)
}
/* delete devices still missing */
- spin_lock_irqsave(&ioc->fc_rport_lock, flags);
list_for_each_entry(ri, &ioc->fc_rports, list) {
/* if newly missing, delete it */
- if ((ri->flags & (MPT_RPORT_INFO_FLAGS_REGISTERED |
- MPT_RPORT_INFO_FLAGS_MISSING))
- == (MPT_RPORT_INFO_FLAGS_REGISTERED |
- MPT_RPORT_INFO_FLAGS_MISSING)) {
+ if (ri->flags & MPT_RPORT_INFO_FLAGS_MISSING) {
ri->flags &= ~(MPT_RPORT_INFO_FLAGS_REGISTERED|
MPT_RPORT_INFO_FLAGS_MISSING);
- ri->remap_needed = 1;
- fc_remote_port_delete(ri->rport);
- /*
- * remote port not really deleted 'cause
- * binding is by WWPN and driver only
- * registers FCP_TARGETs but cannot trust
- * data structures.
- */
+ fc_remote_port_delete(ri->rport); /* won't sleep */
ri->rport = NULL;
+
+ pn = (u64)ri->pg0.WWPN.High << 32 |
+ (u64)ri->pg0.WWPN.Low;
dfcprintk ((MYIOC_s_INFO_FMT
"mptfc_rescan.%d: %llx deleted\n",
ioc->name,
ioc->sh->host_no,
- ri->pg0.WWPN));
+ (unsigned long long)pn));
}
}
- spin_unlock_irqrestore(&ioc->fc_rport_lock,flags);
/*
* allow multiple passes as target state
@@ -870,10 +879,23 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto out_mptfc_probe;
}
- for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
- mptfc_init_host_attr(ioc,ii);
- mptfc_GetFcDevPage0(ioc,ii,mptfc_register_dev);
- }
+ /* initialize workqueue */
+
+ snprintf(ioc->fc_rescan_work_q_name, KOBJ_NAME_LEN, "mptfc_wq_%d",
+ sh->host_no);
+ ioc->fc_rescan_work_q =
+ create_singlethread_workqueue(ioc->fc_rescan_work_q_name);
+ if (!ioc->fc_rescan_work_q)
+ goto out_mptfc_probe;
+
+ /*
+ * scan for rports -
+ * by doing it via the workqueue, some locking is eliminated
+ */
+
+ ioc->fc_rescan_work_count = 1;
+ queue_work(ioc->fc_rescan_work_q, &ioc->fc_rescan_work);
+ flush_workqueue(ioc->fc_rescan_work_q);
return 0;
@@ -949,8 +971,18 @@ mptfc_init(void)
static void __devexit
mptfc_remove(struct pci_dev *pdev)
{
- MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
- struct mptfc_rport_info *p, *n;
+ MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
+ struct mptfc_rport_info *p, *n;
+ struct workqueue_struct *work_q;
+ unsigned long flags;
+
+ /* destroy workqueue */
+ if ((work_q=ioc->fc_rescan_work_q)) {
+ spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
+ ioc->fc_rescan_work_q = NULL;
+ spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
+ destroy_workqueue(work_q);
+ }
fc_remove_host(ioc->sh);
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index e9716b10ace..af6ec553ff7 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -91,6 +91,7 @@ enum mptsas_hotplug_action {
MPTSAS_DEL_DEVICE,
MPTSAS_ADD_RAID,
MPTSAS_DEL_RAID,
+ MPTSAS_IGNORE_EVENT,
};
struct mptsas_hotplug_event {
@@ -298,6 +299,26 @@ mptsas_find_portinfo_by_handle(MPT_ADAPTER *ioc, u16 handle)
return rc;
}
+/*
+ * Returns true if there is a scsi end device
+ */
+static inline int
+mptsas_is_end_device(struct mptsas_devinfo * attached)
+{
+ if ((attached->handle) &&
+ (attached->device_info &
+ MPI_SAS_DEVICE_INFO_END_DEVICE) &&
+ ((attached->device_info &
+ MPI_SAS_DEVICE_INFO_SSP_TARGET) |
+ (attached->device_info &
+ MPI_SAS_DEVICE_INFO_STP_TARGET) |
+ (attached->device_info &
+ MPI_SAS_DEVICE_INFO_SATA_DEVICE)))
+ return 1;
+ else
+ return 0;
+}
+
static int
mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
u32 form, u32 form_specific)
@@ -872,7 +893,11 @@ mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info,
SasDevicePage0_t *buffer;
dma_addr_t dma_handle;
__le64 sas_address;
- int error;
+ int error=0;
+
+ if (ioc->sas_discovery_runtime &&
+ mptsas_is_end_device(device_info))
+ goto out;
hdr.PageVersion = MPI_SASDEVICE0_PAGEVERSION;
hdr.ExtPageLength = 0;
@@ -1009,7 +1034,11 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
CONFIGPARMS cfg;
SasExpanderPage1_t *buffer;
dma_addr_t dma_handle;
- int error;
+ int error=0;
+
+ if (ioc->sas_discovery_runtime &&
+ mptsas_is_end_device(&phy_info->attached))
+ goto out;
hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
hdr.ExtPageLength = 0;
@@ -1068,26 +1097,6 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
return error;
}
-/*
- * Returns true if there is a scsi end device
- */
-static inline int
-mptsas_is_end_device(struct mptsas_devinfo * attached)
-{
- if ((attached->handle) &&
- (attached->device_info &
- MPI_SAS_DEVICE_INFO_END_DEVICE) &&
- ((attached->device_info &
- MPI_SAS_DEVICE_INFO_SSP_TARGET) |
- (attached->device_info &
- MPI_SAS_DEVICE_INFO_STP_TARGET) |
- (attached->device_info &
- MPI_SAS_DEVICE_INFO_SATA_DEVICE)))
- return 1;
- else
- return 0;
-}
-
static void
mptsas_parse_device_info(struct sas_identify *identify,
struct mptsas_devinfo *device_info)
@@ -1737,6 +1746,9 @@ mptsas_hotplug_work(void *arg)
break;
case MPTSAS_ADD_DEVICE:
+ if (ev->phys_disk_num_valid)
+ mpt_findImVolumes(ioc);
+
/*
* Refresh sas device pg0 data
*/
@@ -1868,6 +1880,9 @@ mptsas_hotplug_work(void *arg)
scsi_device_put(sdev);
mpt_findImVolumes(ioc);
break;
+ case MPTSAS_IGNORE_EVENT:
+ default:
+ break;
}
kfree(ev);
@@ -1940,7 +1955,8 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc,
EVENT_DATA_RAID *raid_event_data)
{
struct mptsas_hotplug_event *ev;
- RAID_VOL0_STATUS * volumeStatus;
+ int status = le32_to_cpu(raid_event_data->SettingsStatus);
+ int state = (status >> 8) & 0xff;
if (ioc->bus_type != SAS)
return;
@@ -1955,6 +1971,7 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc,
INIT_WORK(&ev->work, mptsas_hotplug_work, ev);
ev->ioc = ioc;
ev->id = raid_event_data->VolumeID;
+ ev->event_type = MPTSAS_IGNORE_EVENT;
switch (raid_event_data->ReasonCode) {
case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
@@ -1966,6 +1983,25 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc,
ev->phys_disk_num = raid_event_data->PhysDiskNum;
ev->event_type = MPTSAS_DEL_DEVICE;
break;
+ case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
+ switch (state) {
+ case MPI_PD_STATE_ONLINE:
+ ioc->raid_data.isRaid = 1;
+ ev->phys_disk_num_valid = 1;
+ ev->phys_disk_num = raid_event_data->PhysDiskNum;
+ ev->event_type = MPTSAS_ADD_DEVICE;
+ break;
+ case MPI_PD_STATE_MISSING:
+ case MPI_PD_STATE_NOT_COMPATIBLE:
+ case MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST:
+ case MPI_PD_STATE_FAILED_AT_HOST_REQUEST:
+ case MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON:
+ ev->event_type = MPTSAS_DEL_DEVICE;
+ break;
+ default:
+ break;
+ }
+ break;
case MPI_EVENT_RAID_RC_VOLUME_DELETED:
ev->event_type = MPTSAS_DEL_RAID;
break;
@@ -1973,11 +2009,18 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc,
ev->event_type = MPTSAS_ADD_RAID;
break;
case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
- volumeStatus = (RAID_VOL0_STATUS *) &
- raid_event_data->SettingsStatus;
- ev->event_type = (volumeStatus->State ==
- MPI_RAIDVOL0_STATUS_STATE_FAILED) ?
- MPTSAS_DEL_RAID : MPTSAS_ADD_RAID;
+ switch (state) {
+ case MPI_RAIDVOL0_STATUS_STATE_FAILED:
+ case MPI_RAIDVOL0_STATUS_STATE_MISSING:
+ ev->event_type = MPTSAS_DEL_RAID;
+ break;
+ case MPI_RAIDVOL0_STATUS_STATE_OPTIMAL:
+ case MPI_RAIDVOL0_STATUS_STATE_DEGRADED:
+ ev->event_type = MPTSAS_ADD_RAID;
+ break;
+ default:
+ break;
+ }
break;
default:
break;
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 3729062db31..84fa271eb8f 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -632,7 +632,11 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
/* Spoof to SCSI Selection Timeout! */
- sc->result = DID_NO_CONNECT << 16;
+ if (ioc->bus_type != FC)
+ sc->result = DID_NO_CONNECT << 16;
+ /* else fibre, just stall until rescan event */
+ else
+ sc->result = DID_REQUEUE << 16;
if (hd->sel_timeout[pScsiReq->TargetID] < 0xFFFF)
hd->sel_timeout[pScsiReq->TargetID]++;
@@ -877,7 +881,7 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
struct scsi_cmnd *sc;
dsprintk((KERN_INFO MYNAM ": search_running target %d lun %d max %d\n",
- vdevice->target_id, vdevice->lun, max));
+ vdevice->vtarget->target_id, vdevice->lun, max));
for (ii=0; ii < max; ii++) {
if ((sc = hd->ScsiLookup[ii]) != NULL) {
@@ -1645,7 +1649,6 @@ int
mptscsih_abort(struct scsi_cmnd * SCpnt)
{
MPT_SCSI_HOST *hd;
- MPT_ADAPTER *ioc;
MPT_FRAME_HDR *mf;
u32 ctx2abort;
int scpnt_idx;
@@ -1663,14 +1666,6 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
return FAILED;
}
- ioc = hd->ioc;
- if (hd->resetPending) {
- return FAILED;
- }
-
- if (hd->timeouts < -1)
- hd->timeouts++;
-
/* Find this command
*/
if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(SCpnt)) < 0) {
@@ -1684,6 +1679,13 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
return SUCCESS;
}
+ if (hd->resetPending) {
+ return FAILED;
+ }
+
+ if (hd->timeouts < -1)
+ hd->timeouts++;
+
printk(KERN_WARNING MYNAM ": %s: attempting task abort! (sc=%p)\n",
hd->ioc->name, SCpnt);
scsi_print_command(SCpnt);
@@ -1703,7 +1705,7 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
vdev = SCpnt->device->hostdata;
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
vdev->vtarget->bus_id, vdev->vtarget->target_id, vdev->lun,
- ctx2abort, mptscsih_get_tm_timeout(ioc));
+ ctx2abort, mptscsih_get_tm_timeout(hd->ioc));
printk (KERN_WARNING MYNAM ": %s: task abort: %s (sc=%p)\n",
hd->ioc->name,
@@ -2521,15 +2523,15 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
/* 7. FC: Rescan for blocked rports which might have returned.
*/
- else if (ioc->bus_type == FC) {
- int work_count;
- unsigned long flags;
-
+ if (ioc->bus_type == FC) {
spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
- work_count = ++ioc->fc_rescan_work_count;
+ if (ioc->fc_rescan_work_q) {
+ if (ioc->fc_rescan_work_count++ == 0) {
+ queue_work(ioc->fc_rescan_work_q,
+ &ioc->fc_rescan_work);
+ }
+ }
spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
- if (work_count == 1)
- schedule_work(&ioc->fc_rescan_work);
}
dtmprintk((MYIOC_s_WARN_FMT "Post-Reset complete.\n", ioc->name));
@@ -2544,7 +2546,6 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
{
MPT_SCSI_HOST *hd;
u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
- int work_count;
unsigned long flags;
devtverboseprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
@@ -2569,10 +2570,13 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
case MPI_EVENT_RESCAN: /* 06 */
spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
- work_count = ++ioc->fc_rescan_work_count;
+ if (ioc->fc_rescan_work_q) {
+ if (ioc->fc_rescan_work_count++ == 0) {
+ queue_work(ioc->fc_rescan_work_q,
+ &ioc->fc_rescan_work);
+ }
+ }
spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
- if (work_count == 1)
- schedule_work(&ioc->fc_rescan_work);
break;
/*
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 09c745b19cc..f2a4d382ea1 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -783,6 +783,70 @@ static struct pci_device_id mptspi_pci_table[] = {
};
MODULE_DEVICE_TABLE(pci, mptspi_pci_table);
+
+/*
+ * renegotiate for a given target
+ */
+static void
+mptspi_dv_renegotiate_work(void *data)
+{
+ struct work_queue_wrapper *wqw = (struct work_queue_wrapper *)data;
+ struct _MPT_SCSI_HOST *hd = wqw->hd;
+ struct scsi_device *sdev;
+
+ kfree(wqw);
+
+ shost_for_each_device(sdev, hd->ioc->sh)
+ mptspi_dv_device(hd, sdev);
+}
+
+static void
+mptspi_dv_renegotiate(struct _MPT_SCSI_HOST *hd)
+{
+ struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC);
+
+ if (!wqw)
+ return;
+
+ INIT_WORK(&wqw->work, mptspi_dv_renegotiate_work, wqw);
+ wqw->hd = hd;
+
+ schedule_work(&wqw->work);
+}
+
+/*
+ * spi module reset handler
+ */
+static int
+mptspi_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
+{
+ struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)ioc->sh->hostdata;
+ int rc;
+
+ rc = mptscsih_ioc_reset(ioc, reset_phase);
+
+ if (reset_phase == MPT_IOC_POST_RESET)
+ mptspi_dv_renegotiate(hd);
+
+ return rc;
+}
+
+/*
+ * spi module resume handler
+ */
+static int
+mptspi_resume(struct pci_dev *pdev)
+{
+ MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
+ struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)ioc->sh->hostdata;
+ int rc;
+
+ rc = mptscsih_resume(pdev);
+ mptspi_dv_renegotiate(hd);
+
+ return rc;
+}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
@@ -1032,7 +1096,7 @@ static struct pci_driver mptspi_driver = {
.shutdown = mptscsih_shutdown,
#ifdef CONFIG_PM
.suspend = mptscsih_suspend,
- .resume = mptscsih_resume,
+ .resume = mptspi_resume,
#endif
};
@@ -1061,7 +1125,7 @@ mptspi_init(void)
": Registered for IOC event notifications\n"));
}
- if (mpt_reset_register(mptspiDoneCtx, mptscsih_ioc_reset) == 0) {
+ if (mpt_reset_register(mptspiDoneCtx, mptspi_ioc_reset) == 0) {
dprintk((KERN_INFO MYNAM
": Registered for IOC reset notifications\n"));
}
diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c
index 6061c2d101a..88f0eef9cf3 100644
--- a/drivers/mmc/at91_mci.c
+++ b/drivers/mmc/at91_mci.c
@@ -621,9 +621,6 @@ static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
struct at91mci_host *host = mmc_priv(mmc);
unsigned long at91_master_clock = clk_get_rate(mci_clk);
- DBG("Clock %uHz, busmode %u, powermode %u, Vdd %u\n",
- ios->clock, ios->bus_mode, ios->power_mode, ios->vdd);
-
if (host)
host->bus_mode = ios->bus_mode;
else
diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c
index c0326bbc5f2..5dc4bee7abe 100644
--- a/drivers/mmc/au1xmmc.c
+++ b/drivers/mmc/au1xmmc.c
@@ -310,7 +310,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
}
else
data->bytes_xfered =
- (data->blocks * (1 << data->blksz_bits)) -
+ (data->blocks * data->blksz) -
host->pio.len;
}
@@ -575,7 +575,7 @@ static int
au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
{
- int datalen = data->blocks * (1 << data->blksz_bits);
+ int datalen = data->blocks * data->blksz;
if (dma != 0)
host->flags |= HOST_F_DMA;
@@ -596,7 +596,7 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
if (host->dma.len == 0)
return MMC_ERR_TIMEOUT;
- au_writel((1 << data->blksz_bits) - 1, HOST_BLKSIZE(host));
+ au_writel(data->blksz - 1, HOST_BLKSIZE(host));
if (host->flags & HOST_F_DMA) {
int i;
@@ -720,10 +720,6 @@ static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios)
{
struct au1xmmc_host *host = mmc_priv(mmc);
- DBG("set_ios (power=%u, clock=%uHz, vdd=%u, mode=%u)\n",
- host->id, ios->power_mode, ios->clock, ios->vdd,
- ios->bus_mode);
-
if (ios->power_mode == MMC_POWER_OFF)
au1xmmc_set_power(host, 0);
else if (ios->power_mode == MMC_POWER_ON) {
diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c
index ffb7f55d346..a4eb1d0e7a7 100644
--- a/drivers/mmc/imxmmc.c
+++ b/drivers/mmc/imxmmc.c
@@ -102,6 +102,7 @@ struct imxmci_host {
#define IMXMCI_PEND_CPU_DATA_b 5
#define IMXMCI_PEND_CARD_XCHG_b 6
#define IMXMCI_PEND_SET_INIT_b 7
+#define IMXMCI_PEND_STARTED_b 8
#define IMXMCI_PEND_IRQ_m (1 << IMXMCI_PEND_IRQ_b)
#define IMXMCI_PEND_DMA_END_m (1 << IMXMCI_PEND_DMA_END_b)
@@ -111,6 +112,7 @@ struct imxmci_host {
#define IMXMCI_PEND_CPU_DATA_m (1 << IMXMCI_PEND_CPU_DATA_b)
#define IMXMCI_PEND_CARD_XCHG_m (1 << IMXMCI_PEND_CARD_XCHG_b)
#define IMXMCI_PEND_SET_INIT_m (1 << IMXMCI_PEND_SET_INIT_b)
+#define IMXMCI_PEND_STARTED_m (1 << IMXMCI_PEND_STARTED_b)
static void imxmci_stop_clock(struct imxmci_host *host)
{
@@ -131,23 +133,52 @@ static void imxmci_stop_clock(struct imxmci_host *host)
dev_dbg(mmc_dev(host->mmc), "imxmci_stop_clock blocked, no luck\n");
}
-static void imxmci_start_clock(struct imxmci_host *host)
+static int imxmci_start_clock(struct imxmci_host *host)
{
- int i = 0;
+ unsigned int trials = 0;
+ unsigned int delay_limit = 128;
+ unsigned long flags;
+
MMC_STR_STP_CLK &= ~STR_STP_CLK_STOP_CLK;
- while(i < 0x1000) {
- if(!(i & 0x7f))
- MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK;
- if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN) {
- /* Check twice before cut */
+ clear_bit(IMXMCI_PEND_STARTED_b, &host->pending_events);
+
+ /*
+ * Command start of the clock, this usually succeeds in less
+ * then 6 delay loops, but during card detection (low clockrate)
+ * it takes up to 5000 delay loops and sometimes fails for the first time
+ */
+ MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK;
+
+ do {
+ unsigned int delay = delay_limit;
+
+ while(delay--){
if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN)
- return;
+ /* Check twice before cut */
+ if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN)
+ return 0;
+
+ if(test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events))
+ return 0;
}
- i++;
- }
- dev_dbg(mmc_dev(host->mmc), "imxmci_start_clock blocked, no luck\n");
+ local_irq_save(flags);
+ /*
+ * Ensure, that request is not doubled under all possible circumstances.
+ * It is possible, that cock running state is missed, because some other
+ * IRQ or schedule delays this function execution and the clocks has
+ * been already stopped by other means (response processing, SDHC HW)
+ */
+ if(!test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events))
+ MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK;
+ local_irq_restore(flags);
+
+ } while(++trials<256);
+
+ dev_err(mmc_dev(host->mmc), "imxmci_start_clock blocked, no luck\n");
+
+ return -1;
}
static void imxmci_softreset(void)
@@ -187,8 +218,10 @@ static int imxmci_busy_wait_for_status(struct imxmci_host *host,
if(!loops)
return 0;
- dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
- loops, where, *pstat, stat_mask);
+ /* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */
+ if(!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock>=8000000))
+ dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
+ loops, where, *pstat, stat_mask);
return loops;
}
@@ -302,6 +335,9 @@ static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd,
WARN_ON(host->cmd != NULL);
host->cmd = cmd;
+ /* Ensure, that clock are stopped else command programming and start fails */
+ imxmci_stop_clock(host);
+
if (cmd->flags & MMC_RSP_BUSY)
cmdat |= CMD_DAT_CONT_BUSY;
@@ -498,7 +534,7 @@ static int imxmci_data_done(struct imxmci_host *host, unsigned int stat)
data_error = imxmci_finish_data(host, stat);
- if (host->req->stop && (data_error == MMC_ERR_NONE)) {
+ if (host->req->stop) {
imxmci_stop_clock(host);
imxmci_start_cmd(host, host->req->stop, 0);
} else {
@@ -522,7 +558,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
int trans_done = 0;
unsigned int stat = *pstat;
- if(host->actual_bus_width == MMC_BUS_WIDTH_4)
+ if(host->actual_bus_width != MMC_BUS_WIDTH_4)
burst_len = 16;
else
burst_len = 64;
@@ -560,8 +596,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
stat = MMC_STATUS;
/* Flush extra bytes from FIFO */
- while(flush_len >= 2){
- flush_len -= 2;
+ while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){
i = MMC_BUFFER_ACCESS;
stat = MMC_STATUS;
stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */
@@ -622,6 +657,7 @@ static irqreturn_t imxmci_irq(int irq, void *devid, struct pt_regs *regs)
atomic_set(&host->stuck_timeout, 0);
host->status_reg = stat;
set_bit(IMXMCI_PEND_IRQ_b, &host->pending_events);
+ set_bit(IMXMCI_PEND_STARTED_b, &host->pending_events);
tasklet_schedule(&host->tasklet);
return IRQ_RETVAL(handled);;
@@ -714,10 +750,6 @@ static void imxmci_tasklet_fnc(unsigned long data)
data_dir_mask = STATUS_DATA_TRANS_DONE;
}
- imxmci_busy_wait_for_status(host, &stat,
- data_dir_mask,
- 50, "imxmci_tasklet_fnc data");
-
if(stat & data_dir_mask) {
clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events);
imxmci_data_done(host, stat);
@@ -775,10 +807,6 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
struct imxmci_host *host = mmc_priv(mmc);
int prescaler;
- dev_dbg(mmc_dev(host->mmc), "clock %u power %u vdd %u width %u\n",
- ios->clock, ios->power_mode, ios->vdd,
- (ios->bus_width==MMC_BUS_WIDTH_4)?4:1);
-
if( ios->bus_width==MMC_BUS_WIDTH_4 ) {
host->actual_bus_width = MMC_BUS_WIDTH_4;
imx_gpio_mode(PB11_PF_SD_DAT3);
@@ -837,7 +865,11 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
imxmci_stop_clock(host);
MMC_CLK_RATE = (prescaler<<3) | clk;
- imxmci_start_clock(host);
+ /*
+ * Under my understanding, clock should not be started there, because it would
+ * initiate SDHC sequencer and send last or random command into card
+ */
+ /*imxmci_start_clock(host);*/
dev_dbg(mmc_dev(host->mmc), "MMC_CLK_RATE: 0x%08x\n", MMC_CLK_RATE);
} else {
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index da6ddd910fc..6201f3086a0 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -59,21 +59,23 @@ static const unsigned int tacc_mant[] = {
/**
- * mmc_request_done - finish processing an MMC command
- * @host: MMC host which completed command
- * @mrq: MMC request which completed
+ * mmc_request_done - finish processing an MMC request
+ * @host: MMC host which completed request
+ * @mrq: MMC request which request
*
* MMC drivers should call this function when they have completed
- * their processing of a command. This should be called before the
- * data part of the command has completed.
+ * their processing of a request.
*/
void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
{
struct mmc_command *cmd = mrq->cmd;
- int err = mrq->cmd->error;
- pr_debug("MMC: req done (%02x): %d: %08x %08x %08x %08x\n",
- cmd->opcode, err, cmd->resp[0], cmd->resp[1],
- cmd->resp[2], cmd->resp[3]);
+ int err = cmd->error;
+
+ pr_debug("%s: req done (CMD%u): %d/%d/%d: %08x %08x %08x %08x\n",
+ mmc_hostname(host), cmd->opcode, err,
+ mrq->data ? mrq->data->error : 0,
+ mrq->stop ? mrq->stop->error : 0,
+ cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
if (err && cmd->retries) {
cmd->retries--;
@@ -97,8 +99,9 @@ EXPORT_SYMBOL(mmc_request_done);
void
mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
{
- pr_debug("MMC: starting cmd %02x arg %08x flags %08x\n",
- mrq->cmd->opcode, mrq->cmd->arg, mrq->cmd->flags);
+ pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
+ mmc_hostname(host), mrq->cmd->opcode,
+ mrq->cmd->arg, mrq->cmd->flags);
WARN_ON(host->card_busy == NULL);
@@ -312,6 +315,18 @@ void mmc_release_host(struct mmc_host *host)
EXPORT_SYMBOL(mmc_release_host);
+static inline void mmc_set_ios(struct mmc_host *host)
+{
+ struct mmc_ios *ios = &host->ios;
+
+ pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n",
+ mmc_hostname(host), ios->clock, ios->bus_mode,
+ ios->power_mode, ios->chip_select, ios->vdd,
+ ios->bus_width);
+
+ host->ops->set_ios(host, ios);
+}
+
static int mmc_select_card(struct mmc_host *host, struct mmc_card *card)
{
int err;
@@ -364,7 +379,7 @@ static int mmc_select_card(struct mmc_host *host, struct mmc_card *card)
}
}
- host->ops->set_ios(host, &host->ios);
+ mmc_set_ios(host);
return MMC_ERR_NONE;
}
@@ -415,7 +430,7 @@ static u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
ocr = 3 << bit;
host->ios.vdd = bit;
- host->ops->set_ios(host, &host->ios);
+ mmc_set_ios(host);
} else {
ocr = 0;
}
@@ -549,6 +564,7 @@ static void mmc_decode_csd(struct mmc_card *card)
csd->read_partial = UNSTUFF_BITS(resp, 79, 1);
csd->write_misalign = UNSTUFF_BITS(resp, 78, 1);
csd->read_misalign = UNSTUFF_BITS(resp, 77, 1);
+ csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
} else {
@@ -583,6 +599,7 @@ static void mmc_decode_csd(struct mmc_card *card)
csd->read_partial = UNSTUFF_BITS(resp, 79, 1);
csd->write_misalign = UNSTUFF_BITS(resp, 78, 1);
csd->read_misalign = UNSTUFF_BITS(resp, 77, 1);
+ csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
}
@@ -666,7 +683,7 @@ static void mmc_idle_cards(struct mmc_host *host)
struct mmc_command cmd;
host->ios.chip_select = MMC_CS_HIGH;
- host->ops->set_ios(host, &host->ios);
+ mmc_set_ios(host);
mmc_delay(1);
@@ -679,7 +696,7 @@ static void mmc_idle_cards(struct mmc_host *host)
mmc_delay(1);
host->ios.chip_select = MMC_CS_DONTCARE;
- host->ops->set_ios(host, &host->ios);
+ mmc_set_ios(host);
mmc_delay(1);
}
@@ -704,13 +721,13 @@ static void mmc_power_up(struct mmc_host *host)
host->ios.chip_select = MMC_CS_DONTCARE;
host->ios.power_mode = MMC_POWER_UP;
host->ios.bus_width = MMC_BUS_WIDTH_1;
- host->ops->set_ios(host, &host->ios);
+ mmc_set_ios(host);
mmc_delay(1);
host->ios.clock = host->f_min;
host->ios.power_mode = MMC_POWER_ON;
- host->ops->set_ios(host, &host->ios);
+ mmc_set_ios(host);
mmc_delay(2);
}
@@ -723,7 +740,7 @@ static void mmc_power_off(struct mmc_host *host)
host->ios.chip_select = MMC_CS_DONTCARE;
host->ios.power_mode = MMC_POWER_OFF;
host->ios.bus_width = MMC_BUS_WIDTH_1;
- host->ops->set_ios(host, &host->ios);
+ mmc_set_ios(host);
}
static int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
@@ -934,6 +951,7 @@ static void mmc_read_scrs(struct mmc_host *host)
data.timeout_ns = card->csd.tacc_ns * 10;
data.timeout_clks = card->csd.tacc_clks * 10;
data.blksz_bits = 3;
+ data.blksz = 1 << 3;
data.blocks = 1;
data.flags = MMC_DATA_READ;
data.sg = &sg;
@@ -971,7 +989,8 @@ static unsigned int mmc_calculate_clock(struct mmc_host *host)
if (!mmc_card_dead(card) && max_dtr > card->csd.max_dtr)
max_dtr = card->csd.max_dtr;
- pr_debug("MMC: selected %d.%03dMHz transfer rate\n",
+ pr_debug("%s: selected %d.%03dMHz transfer rate\n",
+ mmc_hostname(host),
max_dtr / 1000000, (max_dtr / 1000) % 1000);
return max_dtr;
@@ -1046,7 +1065,7 @@ static void mmc_setup(struct mmc_host *host)
} else {
host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
host->ios.clock = host->f_min;
- host->ops->set_ios(host, &host->ios);
+ mmc_set_ios(host);
/*
* We should remember the OCR mask from the existing
@@ -1082,7 +1101,7 @@ static void mmc_setup(struct mmc_host *host)
* Ok, now switch to push-pull mode.
*/
host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
- host->ops->set_ios(host, &host->ios);
+ mmc_set_ios(host);
mmc_read_csds(host);
@@ -1128,7 +1147,7 @@ static void mmc_rescan(void *data)
* attached cards and the host support.
*/
host->ios.clock = mmc_calculate_clock(host);
- host->ops->set_ios(host, &host->ios);
+ mmc_set_ios(host);
}
mmc_release_host(host);
diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c
index 8eb2a2ede64..e39cc05c64c 100644
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@@ -175,6 +175,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.data.timeout_ns = card->csd.tacc_ns * 10;
brq.data.timeout_clks = card->csd.tacc_clks * 10;
brq.data.blksz_bits = md->block_bits;
+ brq.data.blksz = 1 << md->block_bits;
brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
brq.stop.opcode = MMC_STOP_TRANSMISSION;
brq.stop.arg = 0;
@@ -187,6 +188,12 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.cmd.opcode = MMC_WRITE_BLOCK;
brq.data.flags |= MMC_DATA_WRITE;
brq.data.blocks = 1;
+
+ /*
+ * Scale up the timeout by the r2w factor
+ */
+ brq.data.timeout_ns <<= card->csd.r2w_factor;
+ brq.data.timeout_clks <<= card->csd.r2w_factor;
}
if (brq.data.blocks > 1) {
diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c
index df7e861e2fc..da8e4d7339c 100644
--- a/drivers/mmc/mmci.c
+++ b/drivers/mmc/mmci.c
@@ -402,9 +402,6 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
struct mmci_host *host = mmc_priv(mmc);
u32 clk = 0, pwr = 0;
- DBG(host, "clock %uHz busmode %u powermode %u Vdd %u\n",
- ios->clock, ios->bus_mode, ios->power_mode, ios->vdd);
-
if (ios->clock) {
if (ios->clock >= host->mclk) {
clk = MCI_CLK_BYPASS;
diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c
index eb42cb34942..b49368fd96b 100644
--- a/drivers/mmc/pxamci.c
+++ b/drivers/mmc/pxamci.c
@@ -119,7 +119,7 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
nob = 0xffff;
writel(nob, host->base + MMC_NOB);
- writel(1 << data->blksz_bits, host->base + MMC_BLKLEN);
+ writel(data->blksz, host->base + MMC_BLKLEN);
clks = (unsigned long long)data->timeout_ns * CLOCKRATE;
do_div(clks, 1000000000UL);
@@ -198,7 +198,6 @@ static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd,
static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq)
{
- pr_debug("PXAMCI: request done\n");
host->mrq = NULL;
host->cmd = NULL;
host->data = NULL;
@@ -284,14 +283,14 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
* data blocks as being in error.
*/
if (data->error == MMC_ERR_NONE)
- data->bytes_xfered = data->blocks << data->blksz_bits;
+ data->bytes_xfered = data->blocks * data->blksz;
else
data->bytes_xfered = 0;
pxamci_disable_irq(host, DATA_TRAN_DONE);
host->data = NULL;
- if (host->mrq->stop && data->error == MMC_ERR_NONE) {
+ if (host->mrq->stop) {
pxamci_stop_clock(host);
pxamci_start_cmd(host, host->mrq->stop, 0);
} else {
@@ -309,12 +308,10 @@ static irqreturn_t pxamci_irq(int irq, void *devid, struct pt_regs *regs)
ireg = readl(host->base + MMC_I_REG);
- pr_debug("PXAMCI: irq %08x\n", ireg);
-
if (ireg) {
unsigned stat = readl(host->base + MMC_STAT);
- pr_debug("PXAMCI: stat %08x\n", stat);
+ pr_debug("PXAMCI: irq %08x stat %08x\n", ireg, stat);
if (ireg & END_CMD_RES)
handled |= pxamci_cmd_done(host, stat);
@@ -368,10 +365,6 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct pxamci_host *host = mmc_priv(mmc);
- pr_debug("pxamci_set_ios: clock %u power %u vdd %u.%02u\n",
- ios->clock, ios->power_mode, ios->vdd / 100,
- ios->vdd % 100);
-
if (ios->clock) {
unsigned int clk = CLOCKRATE / ios->clock;
if (CLOCKRATE / clk > ios->clock)
@@ -397,7 +390,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
host->cmdat |= CMDAT_INIT;
}
- pr_debug("pxamci_set_ios: clkrt = %x cmdat = %x\n",
+ pr_debug("PXAMCI: clkrt = %x cmdat = %x\n",
host->clkrt, host->cmdat);
}
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index bdbfca05002..b0053280ff2 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -570,10 +570,6 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
spin_lock_irqsave(&host->lock, flags);
- DBG("clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n",
- ios->clock, ios->bus_mode, ios->power_mode, ios->chip_select,
- ios->vdd, ios->bus_width);
-
/*
* Reset the chip on each power off.
* Should clear out any weird states.
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index 511f7b0b31d..8167332d401 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -662,14 +662,14 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
unsigned long dmaflags;
DBGF("blksz %04x blks %04x flags %08x\n",
- 1 << data->blksz_bits, data->blocks, data->flags);
+ data->blksz, data->blocks, data->flags);
DBGF("tsac %d ms nsac %d clk\n",
data->timeout_ns / 1000000, data->timeout_clks);
/*
* Calculate size.
*/
- host->size = data->blocks << data->blksz_bits;
+ host->size = data->blocks * data->blksz;
/*
* Check timeout values for overflow.
@@ -696,12 +696,12 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
* Two bytes are needed for each data line.
*/
if (host->bus_width == MMC_BUS_WIDTH_1) {
- blksize = (1 << data->blksz_bits) + 2;
+ blksize = data->blksz + 2;
wbsd_write_index(host, WBSD_IDX_PBSMSB, (blksize >> 4) & 0xF0);
wbsd_write_index(host, WBSD_IDX_PBSLSB, blksize & 0xFF);
} else if (host->bus_width == MMC_BUS_WIDTH_4) {
- blksize = (1 << data->blksz_bits) + 2 * 4;
+ blksize = data->blksz + 2 * 4;
wbsd_write_index(host, WBSD_IDX_PBSMSB,
((blksize >> 4) & 0xF0) | WBSD_DATA_WIDTH);
@@ -931,10 +931,6 @@ static void wbsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
struct wbsd_host *host = mmc_priv(mmc);
u8 clk, setup, pwr;
- DBGF("clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n",
- ios->clock, ios->bus_mode, ios->power_mode, ios->chip_select,
- ios->vdd, ios->bus_width);
-
spin_lock_bh(&host->lock);
/*
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index d5dfc784bcc..e1fe960d71b 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -52,6 +52,7 @@
#include <linux/mii.h>
#include <linux/skbuff.h>
#include <linux/delay.h>
+#include <linux/crc32.h>
#include <asm/mipsregs.h>
#include <asm/irq.h>
#include <asm/io.h>
@@ -2038,23 +2039,6 @@ static void au1000_tx_timeout(struct net_device *dev)
netif_wake_queue(dev);
}
-
-static unsigned const ethernet_polynomial = 0x04c11db7U;
-static inline u32 ether_crc(int length, unsigned char *data)
-{
- int crc = -1;
-
- while(--length >= 0) {
- unsigned char current_octet = *data++;
- int bit;
- for (bit = 0; bit < 8; bit++, current_octet >>= 1)
- crc = (crc << 1) ^
- ((crc < 0) ^ (current_octet & 1) ?
- ethernet_polynomial : 0);
- }
- return crc;
-}
-
static void set_rx_mode(struct net_device *dev)
{
struct au1000_private *aup = (struct au1000_private *) dev->priv;
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 3d306681919..d8233e0b789 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -650,9 +650,11 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
/* Hardware bug work-around, the chip is unable to do PCI DMA
to/from anything above 1GB :-( */
- if (mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
+ if (dma_mapping_error(mapping) ||
+ mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
/* Sigh... */
- pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
+ if (!dma_mapping_error(mapping))
+ pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
dev_kfree_skb_any(skb);
skb = __dev_alloc_skb(RX_PKT_BUF_SZ,GFP_DMA);
if (skb == NULL)
@@ -660,8 +662,10 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
mapping = pci_map_single(bp->pdev, skb->data,
RX_PKT_BUF_SZ,
PCI_DMA_FROMDEVICE);
- if (mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
- pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
+ if (dma_mapping_error(mapping) ||
+ mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
+ if (!dma_mapping_error(mapping))
+ pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
dev_kfree_skb_any(skb);
return -ENOMEM;
}
@@ -967,9 +971,10 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
}
mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE);
- if (mapping + len > B44_DMA_MASK) {
+ if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) {
/* Chip can't handle DMA to/from >1GB, use bounce buffer */
- pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE);
+ if (!dma_mapping_error(mapping))
+ pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE);
bounce_skb = __dev_alloc_skb(TX_PKT_BUF_SZ,
GFP_ATOMIC|GFP_DMA);
@@ -978,8 +983,9 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
mapping = pci_map_single(bp->pdev, bounce_skb->data,
len, PCI_DMA_TODEVICE);
- if (mapping + len > B44_DMA_MASK) {
- pci_unmap_single(bp->pdev, mapping,
+ if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) {
+ if (!dma_mapping_error(mapping))
+ pci_unmap_single(bp->pdev, mapping,
len, PCI_DMA_TODEVICE);
dev_kfree_skb_any(bounce_skb);
goto err_out;
@@ -1203,7 +1209,8 @@ static int b44_alloc_consistent(struct b44 *bp)
DMA_TABLE_BYTES,
DMA_BIDIRECTIONAL);
- if (rx_ring_dma + size > B44_DMA_MASK) {
+ if (dma_mapping_error(rx_ring_dma) ||
+ rx_ring_dma + size > B44_DMA_MASK) {
kfree(rx_ring);
goto out_err;
}
@@ -1229,7 +1236,8 @@ static int b44_alloc_consistent(struct b44 *bp)
DMA_TABLE_BYTES,
DMA_TO_DEVICE);
- if (tx_ring_dma + size > B44_DMA_MASK) {
+ if (dma_mapping_error(tx_ring_dma) ||
+ tx_ring_dma + size > B44_DMA_MASK) {
kfree(tx_ring);
goto out_err;
}
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 1f3627470c9..038447fb5c5 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -53,6 +53,7 @@
#define DRV_VERSION "v1.17b"
#define DRV_RELDATE "2006/03/10"
#include "dl2k.h"
+#include <linux/dma-mapping.h>
static char version[] __devinitdata =
KERN_INFO DRV_NAME " " DRV_VERSION " " DRV_RELDATE "\n";
@@ -765,7 +766,7 @@ rio_free_tx (struct net_device *dev, int irq)
break;
skb = np->tx_skbuff[entry];
pci_unmap_single (np->pdev,
- np->tx_ring[entry].fraginfo & 0xffffffffffff,
+ np->tx_ring[entry].fraginfo & DMA_48BIT_MASK,
skb->len, PCI_DMA_TODEVICE);
if (irq)
dev_kfree_skb_irq (skb);
@@ -893,7 +894,7 @@ receive_packet (struct net_device *dev)
/* Small skbuffs for short packets */
if (pkt_len > copy_thresh) {
pci_unmap_single (np->pdev,
- desc->fraginfo & 0xffffffffffff,
+ desc->fraginfo & DMA_48BIT_MASK,
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
skb_put (skb = np->rx_skbuff[entry], pkt_len);
@@ -901,7 +902,7 @@ receive_packet (struct net_device *dev)
} else if ((skb = dev_alloc_skb (pkt_len + 2)) != NULL) {
pci_dma_sync_single_for_cpu(np->pdev,
desc->fraginfo &
- 0xffffffffffff,
+ DMA_48BIT_MASK,
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
skb->dev = dev;
@@ -913,7 +914,7 @@ receive_packet (struct net_device *dev)
skb_put (skb, pkt_len);
pci_dma_sync_single_for_device(np->pdev,
desc->fraginfo &
- 0xffffffffffff,
+ DMA_48BIT_MASK,
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
}
@@ -1800,7 +1801,7 @@ rio_close (struct net_device *dev)
skb = np->rx_skbuff[i];
if (skb) {
pci_unmap_single(np->pdev,
- np->rx_ring[i].fraginfo & 0xffffffffffff,
+ np->rx_ring[i].fraginfo & DMA_48BIT_MASK,
skb->len, PCI_DMA_FROMDEVICE);
dev_kfree_skb (skb);
np->rx_skbuff[i] = NULL;
@@ -1810,7 +1811,7 @@ rio_close (struct net_device *dev)
skb = np->tx_skbuff[i];
if (skb) {
pci_unmap_single(np->pdev,
- np->tx_ring[i].fraginfo & 0xffffffffffff,
+ np->tx_ring[i].fraginfo & DMA_48BIT_MASK,
skb->len, PCI_DMA_TODEVICE);
dev_kfree_skb (skb);
np->tx_skbuff[i] = NULL;
diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c
index 79a8fbcf5f9..0d5fccc984b 100644
--- a/drivers/net/hamradio/dmascc.c
+++ b/drivers/net/hamradio/dmascc.c
@@ -582,7 +582,6 @@ static int __init setup_adapter(int card_base, int type, int n)
INIT_WORK(&priv->rx_work, rx_bh, priv);
dev->priv = priv;
sprintf(dev->name, "dmascc%i", 2 * n + i);
- SET_MODULE_OWNER(dev);
dev->base_addr = card_base;
dev->irq = irq;
dev->open = scc_open;
diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c
index 6ace0e914fd..5927784df3f 100644
--- a/drivers/net/hamradio/scc.c
+++ b/drivers/net/hamradio/scc.c
@@ -1550,7 +1550,6 @@ static unsigned char ax25_nocall[AX25_ADDR_LEN] =
static void scc_net_setup(struct net_device *dev)
{
- SET_MODULE_OWNER(dev);
dev->tx_queue_len = 16; /* should be enough... */
dev->open = scc_net_open;
diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c
index fe22479eb20..b49884048ca 100644
--- a/drivers/net/hamradio/yam.c
+++ b/drivers/net/hamradio/yam.c
@@ -1098,7 +1098,6 @@ static void yam_setup(struct net_device *dev)
dev->base_addr = yp->iobase;
dev->irq = yp->irq;
- SET_MODULE_OWNER(dev);
dev->open = yam_open;
dev->stop = yam_close;
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index 27ab75f2079..c1ce2398efe 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -46,4 +46,4 @@ obj-$(CONFIG_MA600_DONGLE) += ma600-sir.o
obj-$(CONFIG_TOIM3232_DONGLE) += toim3232-sir.o
# The SIR helper module
-sir-dev-objs := sir_dev.o sir_dongle.o sir_kthread.o
+sir-dev-objs := sir_dev.o sir_dongle.o
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 96bdb73c228..cd87593e4e8 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1778,7 +1778,7 @@ static int irda_usb_probe(struct usb_interface *intf,
if (self->needspatch) {
ret = usb_control_msg (self->usbdev, usb_sndctrlpipe (self->usbdev, 0),
- 0x02, 0x40, 0, 0, 0, 0, msecs_to_jiffies(500));
+ 0x02, 0x40, 0, 0, NULL, 0, 500);
if (ret < 0) {
IRDA_DEBUG (0, "usb_control_msg failed %d\n", ret);
goto err_out_3;
diff --git a/drivers/net/irda/sir-dev.h b/drivers/net/irda/sir-dev.h
index f69fb4cec76..9fa294a546d 100644
--- a/drivers/net/irda/sir-dev.h
+++ b/drivers/net/irda/sir-dev.h
@@ -15,23 +15,14 @@
#define IRDA_SIR_H
#include <linux/netdevice.h>
+#include <linux/workqueue.h>
#include <net/irda/irda.h>
#include <net/irda/irda_device.h> // iobuff_t
-/* FIXME: unify irda_request with sir_fsm! */
-
-struct irda_request {
- struct list_head lh_request;
- unsigned long pending;
- void (*func)(void *);
- void *data;
- struct timer_list timer;
-};
-
struct sir_fsm {
struct semaphore sem;
- struct irda_request rq;
+ struct work_struct work;
unsigned state, substate;
int param;
int result;
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
index ea7c9464d46..3b5854d10c1 100644
--- a/drivers/net/irda/sir_dev.c
+++ b/drivers/net/irda/sir_dev.c
@@ -23,6 +23,298 @@
#include "sir-dev.h"
+
+static struct workqueue_struct *irda_sir_wq;
+
+/* STATE MACHINE */
+
+/* substate handler of the config-fsm to handle the cases where we want
+ * to wait for transmit completion before changing the port configuration
+ */
+
+static int sirdev_tx_complete_fsm(struct sir_dev *dev)
+{
+ struct sir_fsm *fsm = &dev->fsm;
+ unsigned next_state, delay;
+ unsigned bytes_left;
+
+ do {
+ next_state = fsm->substate; /* default: stay in current substate */
+ delay = 0;
+
+ switch(fsm->substate) {
+
+ case SIRDEV_STATE_WAIT_XMIT:
+ if (dev->drv->chars_in_buffer)
+ bytes_left = dev->drv->chars_in_buffer(dev);
+ else
+ bytes_left = 0;
+ if (!bytes_left) {
+ next_state = SIRDEV_STATE_WAIT_UNTIL_SENT;
+ break;
+ }
+
+ if (dev->speed > 115200)
+ delay = (bytes_left*8*10000) / (dev->speed/100);
+ else if (dev->speed > 0)
+ delay = (bytes_left*10*10000) / (dev->speed/100);
+ else
+ delay = 0;
+ /* expected delay (usec) until remaining bytes are sent */
+ if (delay < 100) {
+ udelay(delay);
+ delay = 0;
+ break;
+ }
+ /* sleep some longer delay (msec) */
+ delay = (delay+999) / 1000;
+ break;
+
+ case SIRDEV_STATE_WAIT_UNTIL_SENT:
+ /* block until underlaying hardware buffer are empty */
+ if (dev->drv->wait_until_sent)
+ dev->drv->wait_until_sent(dev);
+ next_state = SIRDEV_STATE_TX_DONE;
+ break;
+
+ case SIRDEV_STATE_TX_DONE:
+ return 0;
+
+ default:
+ IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ fsm->substate = next_state;
+ } while (delay == 0);
+ return delay;
+}
+
+/*
+ * Function sirdev_config_fsm
+ *
+ * State machine to handle the configuration of the device (and attached dongle, if any).
+ * This handler is scheduled for execution in kIrDAd context, so we can sleep.
+ * however, kIrDAd is shared by all sir_dev devices so we better don't sleep there too
+ * long. Instead, for longer delays we start a timer to reschedule us later.
+ * On entry, fsm->sem is always locked and the netdev xmit queue stopped.
+ * Both must be unlocked/restarted on completion - but only on final exit.
+ */
+
+static void sirdev_config_fsm(void *data)
+{
+ struct sir_dev *dev = data;
+ struct sir_fsm *fsm = &dev->fsm;
+ int next_state;
+ int ret = -1;
+ unsigned delay;
+
+ IRDA_DEBUG(2, "%s(), <%ld>\n", __FUNCTION__, jiffies);
+
+ do {
+ IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n",
+ __FUNCTION__, fsm->state, fsm->substate);
+
+ next_state = fsm->state;
+ delay = 0;
+
+ switch(fsm->state) {
+
+ case SIRDEV_STATE_DONGLE_OPEN:
+ if (dev->dongle_drv != NULL) {
+ ret = sirdev_put_dongle(dev);
+ if (ret) {
+ fsm->result = -EINVAL;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+ }
+
+ /* Initialize dongle */
+ ret = sirdev_get_dongle(dev, fsm->param);
+ if (ret) {
+ fsm->result = ret;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+
+ /* Dongles are powered through the modem control lines which
+ * were just set during open. Before resetting, let's wait for
+ * the power to stabilize. This is what some dongle drivers did
+ * in open before, while others didn't - should be safe anyway.
+ */
+
+ delay = 50;
+ fsm->substate = SIRDEV_STATE_DONGLE_RESET;
+ next_state = SIRDEV_STATE_DONGLE_RESET;
+
+ fsm->param = 9600;
+
+ break;
+
+ case SIRDEV_STATE_DONGLE_CLOSE:
+ /* shouldn't we just treat this as success=? */
+ if (dev->dongle_drv == NULL) {
+ fsm->result = -EINVAL;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+
+ ret = sirdev_put_dongle(dev);
+ if (ret) {
+ fsm->result = ret;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+ next_state = SIRDEV_STATE_DONE;
+ break;
+
+ case SIRDEV_STATE_SET_DTR_RTS:
+ ret = sirdev_set_dtr_rts(dev,
+ (fsm->param&0x02) ? TRUE : FALSE,
+ (fsm->param&0x01) ? TRUE : FALSE);
+ next_state = SIRDEV_STATE_DONE;
+ break;
+
+ case SIRDEV_STATE_SET_SPEED:
+ fsm->substate = SIRDEV_STATE_WAIT_XMIT;
+ next_state = SIRDEV_STATE_DONGLE_CHECK;
+ break;
+
+ case SIRDEV_STATE_DONGLE_CHECK:
+ ret = sirdev_tx_complete_fsm(dev);
+ if (ret < 0) {
+ fsm->result = ret;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+ if ((delay=ret) != 0)
+ break;
+
+ if (dev->dongle_drv) {
+ fsm->substate = SIRDEV_STATE_DONGLE_RESET;
+ next_state = SIRDEV_STATE_DONGLE_RESET;
+ }
+ else {
+ dev->speed = fsm->param;
+ next_state = SIRDEV_STATE_PORT_SPEED;
+ }
+ break;
+
+ case SIRDEV_STATE_DONGLE_RESET:
+ if (dev->dongle_drv->reset) {
+ ret = dev->dongle_drv->reset(dev);
+ if (ret < 0) {
+ fsm->result = ret;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+ }
+ else
+ ret = 0;
+ if ((delay=ret) == 0) {
+ /* set serial port according to dongle default speed */
+ if (dev->drv->set_speed)
+ dev->drv->set_speed(dev, dev->speed);
+ fsm->substate = SIRDEV_STATE_DONGLE_SPEED;
+ next_state = SIRDEV_STATE_DONGLE_SPEED;
+ }
+ break;
+
+ case SIRDEV_STATE_DONGLE_SPEED:
+ if (dev->dongle_drv->reset) {
+ ret = dev->dongle_drv->set_speed(dev, fsm->param);
+ if (ret < 0) {
+ fsm->result = ret;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+ }
+ else
+ ret = 0;
+ if ((delay=ret) == 0)
+ next_state = SIRDEV_STATE_PORT_SPEED;
+ break;
+
+ case SIRDEV_STATE_PORT_SPEED:
+ /* Finally we are ready to change the serial port speed */
+ if (dev->drv->set_speed)
+ dev->drv->set_speed(dev, dev->speed);
+ dev->new_speed = 0;
+ next_state = SIRDEV_STATE_DONE;
+ break;
+
+ case SIRDEV_STATE_DONE:
+ /* Signal network layer so it can send more frames */
+ netif_wake_queue(dev->netdev);
+ next_state = SIRDEV_STATE_COMPLETE;
+ break;
+
+ default:
+ IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
+ fsm->result = -EINVAL;
+ /* fall thru */
+
+ case SIRDEV_STATE_ERROR:
+ IRDA_ERROR("%s - error: %d\n", __FUNCTION__, fsm->result);
+
+#if 0 /* don't enable this before we have netdev->tx_timeout to recover */
+ netif_stop_queue(dev->netdev);
+#else
+ netif_wake_queue(dev->netdev);
+#endif
+ /* fall thru */
+
+ case SIRDEV_STATE_COMPLETE:
+ /* config change finished, so we are not busy any longer */
+ sirdev_enable_rx(dev);
+ up(&fsm->sem);
+ return;
+ }
+ fsm->state = next_state;
+ } while(!delay);
+
+ queue_delayed_work(irda_sir_wq, &fsm->work, msecs_to_jiffies(delay));
+}
+
+/* schedule some device configuration task for execution by kIrDAd
+ * on behalf of the above state machine.
+ * can be called from process or interrupt/tasklet context.
+ */
+
+int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned param)
+{
+ struct sir_fsm *fsm = &dev->fsm;
+
+ IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __FUNCTION__, initial_state, param);
+
+ if (down_trylock(&fsm->sem)) {
+ if (in_interrupt() || in_atomic() || irqs_disabled()) {
+ IRDA_DEBUG(1, "%s(), state machine busy!\n", __FUNCTION__);
+ return -EWOULDBLOCK;
+ } else
+ down(&fsm->sem);
+ }
+
+ if (fsm->state == SIRDEV_STATE_DEAD) {
+ /* race with sirdev_close should never happen */
+ IRDA_ERROR("%s(), instance staled!\n", __FUNCTION__);
+ up(&fsm->sem);
+ return -ESTALE; /* or better EPIPE? */
+ }
+
+ netif_stop_queue(dev->netdev);
+ atomic_set(&dev->enable_rx, 0);
+
+ fsm->state = initial_state;
+ fsm->param = param;
+ fsm->result = 0;
+
+ INIT_WORK(&fsm->work, sirdev_config_fsm, dev);
+ queue_work(irda_sir_wq, &fsm->work);
+ return 0;
+}
+
+
/***************************************************************************/
void sirdev_enable_rx(struct sir_dev *dev)
@@ -619,10 +911,6 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n
spin_lock_init(&dev->tx_lock);
init_MUTEX(&dev->fsm.sem);
- INIT_LIST_HEAD(&dev->fsm.rq.lh_request);
- dev->fsm.rq.pending = 0;
- init_timer(&dev->fsm.rq.timer);
-
dev->drv = drv;
dev->netdev = ndev;
@@ -682,3 +970,22 @@ int sirdev_put_instance(struct sir_dev *dev)
}
EXPORT_SYMBOL(sirdev_put_instance);
+static int __init sir_wq_init(void)
+{
+ irda_sir_wq = create_singlethread_workqueue("irda_sir_wq");
+ if (!irda_sir_wq)
+ return -ENOMEM;
+ return 0;
+}
+
+static void __exit sir_wq_exit(void)
+{
+ destroy_workqueue(irda_sir_wq);
+}
+
+module_init(sir_wq_init);
+module_exit(sir_wq_exit);
+
+MODULE_AUTHOR("Martin Diehl <info@mdiehl.de>");
+MODULE_DESCRIPTION("IrDA SIR core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/irda/sir_kthread.c b/drivers/net/irda/sir_kthread.c
deleted file mode 100644
index e3904d6bfec..00000000000
--- a/drivers/net/irda/sir_kthread.c
+++ /dev/null
@@ -1,508 +0,0 @@
-/*********************************************************************
- *
- * sir_kthread.c: dedicated thread to process scheduled
- * sir device setup requests
- *
- * Copyright (c) 2002 Martin Diehl
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/init.h>
-#include <linux/smp_lock.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-
-#include <net/irda/irda.h>
-
-#include "sir-dev.h"
-
-/**************************************************************************
- *
- * kIrDAd kernel thread and config state machine
- *
- */
-
-struct irda_request_queue {
- struct list_head request_list;
- spinlock_t lock;
- task_t *thread;
- struct completion exit;
- wait_queue_head_t kick, done;
- atomic_t num_pending;
-};
-
-static struct irda_request_queue irda_rq_queue;
-
-static int irda_queue_request(struct irda_request *rq)
-{
- int ret = 0;
- unsigned long flags;
-
- if (!test_and_set_bit(0, &rq->pending)) {
- spin_lock_irqsave(&irda_rq_queue.lock, flags);
- list_add_tail(&rq->lh_request, &irda_rq_queue.request_list);
- wake_up(&irda_rq_queue.kick);
- atomic_inc(&irda_rq_queue.num_pending);
- spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
- ret = 1;
- }
- return ret;
-}
-
-static void irda_request_timer(unsigned long data)
-{
- struct irda_request *rq = (struct irda_request *)data;
- unsigned long flags;
-
- spin_lock_irqsave(&irda_rq_queue.lock, flags);
- list_add_tail(&rq->lh_request, &irda_rq_queue.request_list);
- wake_up(&irda_rq_queue.kick);
- spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
-}
-
-static int irda_queue_delayed_request(struct irda_request *rq, unsigned long delay)
-{
- int ret = 0;
- struct timer_list *timer = &rq->timer;
-
- if (!test_and_set_bit(0, &rq->pending)) {
- timer->expires = jiffies + delay;
- timer->function = irda_request_timer;
- timer->data = (unsigned long)rq;
- atomic_inc(&irda_rq_queue.num_pending);
- add_timer(timer);
- ret = 1;
- }
- return ret;
-}
-
-static void run_irda_queue(void)
-{
- unsigned long flags;
- struct list_head *entry, *tmp;
- struct irda_request *rq;
-
- spin_lock_irqsave(&irda_rq_queue.lock, flags);
- list_for_each_safe(entry, tmp, &irda_rq_queue.request_list) {
- rq = list_entry(entry, struct irda_request, lh_request);
- list_del_init(entry);
- spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
-
- clear_bit(0, &rq->pending);
- rq->func(rq->data);
-
- if (atomic_dec_and_test(&irda_rq_queue.num_pending))
- wake_up(&irda_rq_queue.done);
-
- spin_lock_irqsave(&irda_rq_queue.lock, flags);
- }
- spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
-}
-
-static int irda_thread(void *startup)
-{
- DECLARE_WAITQUEUE(wait, current);
-
- daemonize("kIrDAd");
-
- irda_rq_queue.thread = current;
-
- complete((struct completion *)startup);
-
- while (irda_rq_queue.thread != NULL) {
-
- /* We use TASK_INTERRUPTIBLE, rather than
- * TASK_UNINTERRUPTIBLE. Andrew Morton made this
- * change ; he told me that it is safe, because "signal
- * blocking is now handled in daemonize()", he added
- * that the problem is that "uninterruptible sleep
- * contributes to load average", making user worry.
- * Jean II */
- set_task_state(current, TASK_INTERRUPTIBLE);
- add_wait_queue(&irda_rq_queue.kick, &wait);
- if (list_empty(&irda_rq_queue.request_list))
- schedule();
- else
- __set_task_state(current, TASK_RUNNING);
- remove_wait_queue(&irda_rq_queue.kick, &wait);
-
- /* make swsusp happy with our thread */
- try_to_freeze();
-
- run_irda_queue();
- }
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,35)
- reparent_to_init();
-#endif
- complete_and_exit(&irda_rq_queue.exit, 0);
- /* never reached */
- return 0;
-}
-
-
-static void flush_irda_queue(void)
-{
- if (atomic_read(&irda_rq_queue.num_pending)) {
-
- DECLARE_WAITQUEUE(wait, current);
-
- if (!list_empty(&irda_rq_queue.request_list))
- run_irda_queue();
-
- set_task_state(current, TASK_UNINTERRUPTIBLE);
- add_wait_queue(&irda_rq_queue.done, &wait);
- if (atomic_read(&irda_rq_queue.num_pending))
- schedule();
- else
- __set_task_state(current, TASK_RUNNING);
- remove_wait_queue(&irda_rq_queue.done, &wait);
- }
-}
-
-/* substate handler of the config-fsm to handle the cases where we want
- * to wait for transmit completion before changing the port configuration
- */
-
-static int irda_tx_complete_fsm(struct sir_dev *dev)
-{
- struct sir_fsm *fsm = &dev->fsm;
- unsigned next_state, delay;
- unsigned bytes_left;
-
- do {
- next_state = fsm->substate; /* default: stay in current substate */
- delay = 0;
-
- switch(fsm->substate) {
-
- case SIRDEV_STATE_WAIT_XMIT:
- if (dev->drv->chars_in_buffer)
- bytes_left = dev->drv->chars_in_buffer(dev);
- else
- bytes_left = 0;
- if (!bytes_left) {
- next_state = SIRDEV_STATE_WAIT_UNTIL_SENT;
- break;
- }
-
- if (dev->speed > 115200)
- delay = (bytes_left*8*10000) / (dev->speed/100);
- else if (dev->speed > 0)
- delay = (bytes_left*10*10000) / (dev->speed/100);
- else
- delay = 0;
- /* expected delay (usec) until remaining bytes are sent */
- if (delay < 100) {
- udelay(delay);
- delay = 0;
- break;
- }
- /* sleep some longer delay (msec) */
- delay = (delay+999) / 1000;
- break;
-
- case SIRDEV_STATE_WAIT_UNTIL_SENT:
- /* block until underlaying hardware buffer are empty */
- if (dev->drv->wait_until_sent)
- dev->drv->wait_until_sent(dev);
- next_state = SIRDEV_STATE_TX_DONE;
- break;
-
- case SIRDEV_STATE_TX_DONE:
- return 0;
-
- default:
- IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
- return -EINVAL;
- }
- fsm->substate = next_state;
- } while (delay == 0);
- return delay;
-}
-
-/*
- * Function irda_config_fsm
- *
- * State machine to handle the configuration of the device (and attached dongle, if any).
- * This handler is scheduled for execution in kIrDAd context, so we can sleep.
- * however, kIrDAd is shared by all sir_dev devices so we better don't sleep there too
- * long. Instead, for longer delays we start a timer to reschedule us later.
- * On entry, fsm->sem is always locked and the netdev xmit queue stopped.
- * Both must be unlocked/restarted on completion - but only on final exit.
- */
-
-static void irda_config_fsm(void *data)
-{
- struct sir_dev *dev = data;
- struct sir_fsm *fsm = &dev->fsm;
- int next_state;
- int ret = -1;
- unsigned delay;
-
- IRDA_DEBUG(2, "%s(), <%ld>\n", __FUNCTION__, jiffies);
-
- do {
- IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n",
- __FUNCTION__, fsm->state, fsm->substate);
-
- next_state = fsm->state;
- delay = 0;
-
- switch(fsm->state) {
-
- case SIRDEV_STATE_DONGLE_OPEN:
- if (dev->dongle_drv != NULL) {
- ret = sirdev_put_dongle(dev);
- if (ret) {
- fsm->result = -EINVAL;
- next_state = SIRDEV_STATE_ERROR;
- break;
- }
- }
-
- /* Initialize dongle */
- ret = sirdev_get_dongle(dev, fsm->param);
- if (ret) {
- fsm->result = ret;
- next_state = SIRDEV_STATE_ERROR;
- break;
- }
-
- /* Dongles are powered through the modem control lines which
- * were just set during open. Before resetting, let's wait for
- * the power to stabilize. This is what some dongle drivers did
- * in open before, while others didn't - should be safe anyway.
- */
-
- delay = 50;
- fsm->substate = SIRDEV_STATE_DONGLE_RESET;
- next_state = SIRDEV_STATE_DONGLE_RESET;
-
- fsm->param = 9600;
-
- break;
-
- case SIRDEV_STATE_DONGLE_CLOSE:
- /* shouldn't we just treat this as success=? */
- if (dev->dongle_drv == NULL) {
- fsm->result = -EINVAL;
- next_state = SIRDEV_STATE_ERROR;
- break;
- }
-
- ret = sirdev_put_dongle(dev);
- if (ret) {
- fsm->result = ret;
- next_state = SIRDEV_STATE_ERROR;
- break;
- }
- next_state = SIRDEV_STATE_DONE;
- break;
-
- case SIRDEV_STATE_SET_DTR_RTS:
- ret = sirdev_set_dtr_rts(dev,
- (fsm->param&0x02) ? TRUE : FALSE,
- (fsm->param&0x01) ? TRUE : FALSE);
- next_state = SIRDEV_STATE_DONE;
- break;
-
- case SIRDEV_STATE_SET_SPEED:
- fsm->substate = SIRDEV_STATE_WAIT_XMIT;
- next_state = SIRDEV_STATE_DONGLE_CHECK;
- break;
-
- case SIRDEV_STATE_DONGLE_CHECK:
- ret = irda_tx_complete_fsm(dev);
- if (ret < 0) {
- fsm->result = ret;
- next_state = SIRDEV_STATE_ERROR;
- break;
- }
- if ((delay=ret) != 0)
- break;
-
- if (dev->dongle_drv) {
- fsm->substate = SIRDEV_STATE_DONGLE_RESET;
- next_state = SIRDEV_STATE_DONGLE_RESET;
- }
- else {
- dev->speed = fsm->param;
- next_state = SIRDEV_STATE_PORT_SPEED;
- }
- break;
-
- case SIRDEV_STATE_DONGLE_RESET:
- if (dev->dongle_drv->reset) {
- ret = dev->dongle_drv->reset(dev);
- if (ret < 0) {
- fsm->result = ret;
- next_state = SIRDEV_STATE_ERROR;
- break;
- }
- }
- else
- ret = 0;
- if ((delay=ret) == 0) {
- /* set serial port according to dongle default speed */
- if (dev->drv->set_speed)
- dev->drv->set_speed(dev, dev->speed);
- fsm->substate = SIRDEV_STATE_DONGLE_SPEED;
- next_state = SIRDEV_STATE_DONGLE_SPEED;
- }
- break;
-
- case SIRDEV_STATE_DONGLE_SPEED:
- if (dev->dongle_drv->reset) {
- ret = dev->dongle_drv->set_speed(dev, fsm->param);
- if (ret < 0) {
- fsm->result = ret;
- next_state = SIRDEV_STATE_ERROR;
- break;
- }
- }
- else
- ret = 0;
- if ((delay=ret) == 0)
- next_state = SIRDEV_STATE_PORT_SPEED;
- break;
-
- case SIRDEV_STATE_PORT_SPEED:
- /* Finally we are ready to change the serial port speed */
- if (dev->drv->set_speed)
- dev->drv->set_speed(dev, dev->speed);
- dev->new_speed = 0;
- next_state = SIRDEV_STATE_DONE;
- break;
-
- case SIRDEV_STATE_DONE:
- /* Signal network layer so it can send more frames */
- netif_wake_queue(dev->netdev);
- next_state = SIRDEV_STATE_COMPLETE;
- break;
-
- default:
- IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
- fsm->result = -EINVAL;
- /* fall thru */
-
- case SIRDEV_STATE_ERROR:
- IRDA_ERROR("%s - error: %d\n", __FUNCTION__, fsm->result);
-
-#if 0 /* don't enable this before we have netdev->tx_timeout to recover */
- netif_stop_queue(dev->netdev);
-#else
- netif_wake_queue(dev->netdev);
-#endif
- /* fall thru */
-
- case SIRDEV_STATE_COMPLETE:
- /* config change finished, so we are not busy any longer */
- sirdev_enable_rx(dev);
- up(&fsm->sem);
- return;
- }
- fsm->state = next_state;
- } while(!delay);
-
- irda_queue_delayed_request(&fsm->rq, msecs_to_jiffies(delay));
-}
-
-/* schedule some device configuration task for execution by kIrDAd
- * on behalf of the above state machine.
- * can be called from process or interrupt/tasklet context.
- */
-
-int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned param)
-{
- struct sir_fsm *fsm = &dev->fsm;
- int xmit_was_down;
-
- IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __FUNCTION__, initial_state, param);
-
- if (down_trylock(&fsm->sem)) {
- if (in_interrupt() || in_atomic() || irqs_disabled()) {
- IRDA_DEBUG(1, "%s(), state machine busy!\n", __FUNCTION__);
- return -EWOULDBLOCK;
- } else
- down(&fsm->sem);
- }
-
- if (fsm->state == SIRDEV_STATE_DEAD) {
- /* race with sirdev_close should never happen */
- IRDA_ERROR("%s(), instance staled!\n", __FUNCTION__);
- up(&fsm->sem);
- return -ESTALE; /* or better EPIPE? */
- }
-
- xmit_was_down = netif_queue_stopped(dev->netdev);
- netif_stop_queue(dev->netdev);
- atomic_set(&dev->enable_rx, 0);
-
- fsm->state = initial_state;
- fsm->param = param;
- fsm->result = 0;
-
- INIT_LIST_HEAD(&fsm->rq.lh_request);
- fsm->rq.pending = 0;
- fsm->rq.func = irda_config_fsm;
- fsm->rq.data = dev;
-
- if (!irda_queue_request(&fsm->rq)) { /* returns 0 on error! */
- atomic_set(&dev->enable_rx, 1);
- if (!xmit_was_down)
- netif_wake_queue(dev->netdev);
- up(&fsm->sem);
- return -EAGAIN;
- }
- return 0;
-}
-
-static int __init irda_thread_create(void)
-{
- struct completion startup;
- int pid;
-
- spin_lock_init(&irda_rq_queue.lock);
- irda_rq_queue.thread = NULL;
- INIT_LIST_HEAD(&irda_rq_queue.request_list);
- init_waitqueue_head(&irda_rq_queue.kick);
- init_waitqueue_head(&irda_rq_queue.done);
- atomic_set(&irda_rq_queue.num_pending, 0);
-
- init_completion(&startup);
- pid = kernel_thread(irda_thread, &startup, CLONE_FS|CLONE_FILES);
- if (pid <= 0)
- return -EAGAIN;
- else
- wait_for_completion(&startup);
-
- return 0;
-}
-
-static void __exit irda_thread_join(void)
-{
- if (irda_rq_queue.thread) {
- flush_irda_queue();
- init_completion(&irda_rq_queue.exit);
- irda_rq_queue.thread = NULL;
- wake_up(&irda_rq_queue.kick);
- wait_for_completion(&irda_rq_queue.exit);
- }
-}
-
-module_init(irda_thread_create);
-module_exit(irda_thread_join);
-
-MODULE_AUTHOR("Martin Diehl <info@mdiehl.de>");
-MODULE_DESCRIPTION("IrDA SIR core");
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 58f76cefbc8..a4674044bd6 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -54,6 +54,7 @@
#include <linux/rtnetlink.h>
#include <linux/serial_reg.h>
#include <linux/dma-mapping.h>
+#include <linux/pnp.h>
#include <linux/platform_device.h>
#include <asm/io.h>
@@ -358,6 +359,16 @@ static inline void register_bank(int iobase, int bank)
iobase + IRCC_MASTER);
}
+#ifdef CONFIG_PNP
+/* PNP hotplug support */
+static const struct pnp_device_id smsc_ircc_pnp_table[] = {
+ { .id = "SMCf010", .driver_data = 0 },
+ /* and presumably others */
+ { }
+};
+MODULE_DEVICE_TABLE(pnp, smsc_ircc_pnp_table);
+#endif
+
/*******************************************************************************
*
@@ -2072,7 +2083,8 @@ static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self)
/* PROBING
*
- *
+ * REVISIT we can be told about the device by PNP, and should use that info
+ * instead of probing hardware and creating a platform_device ...
*/
static int __init smsc_ircc_look_for_chips(void)
diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c
index 6f7dce8eba5..b67f586d739 100644
--- a/drivers/net/ixp2000/enp2611.c
+++ b/drivers/net/ixp2000/enp2611.c
@@ -149,6 +149,8 @@ static void enp2611_check_link_status(unsigned long __dummy)
int status;
dev = nds[i];
+ if (dev == NULL)
+ continue;
status = pm3386_is_link_up(i);
if (status && !netif_carrier_ok(dev)) {
@@ -191,6 +193,7 @@ static void enp2611_set_port_admin_status(int port, int up)
static int __init enp2611_init_module(void)
{
+ int ports;
int i;
if (!machine_is_enp2611())
@@ -199,7 +202,8 @@ static int __init enp2611_init_module(void)
caleb_reset();
pm3386_reset();
- for (i = 0; i < 3; i++) {
+ ports = pm3386_port_count();
+ for (i = 0; i < ports; i++) {
nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv));
if (nds[i] == NULL) {
while (--i >= 0)
@@ -215,9 +219,10 @@ static int __init enp2611_init_module(void)
ixp2400_msf_init(&enp2611_msf_parameters);
- if (ixpdev_init(3, nds, enp2611_set_port_admin_status)) {
- for (i = 0; i < 3; i++)
- free_netdev(nds[i]);
+ if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) {
+ for (i = 0; i < ports; i++)
+ if (nds[i])
+ free_netdev(nds[i]);
return -EINVAL;
}
diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ixp2000/pm3386.c
index 5c7ab756405..5224651c9aa 100644
--- a/drivers/net/ixp2000/pm3386.c
+++ b/drivers/net/ixp2000/pm3386.c
@@ -86,40 +86,53 @@ static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value)
pm3386_reg_write(port >> 1, reg, value);
}
+int pm3386_secondary_present(void)
+{
+ return pm3386_reg_read(1, 0) == 0x3386;
+}
void pm3386_reset(void)
{
u8 mac[3][6];
+ int secondary;
+
+ secondary = pm3386_secondary_present();
/* Save programmed MAC addresses. */
pm3386_get_mac(0, mac[0]);
pm3386_get_mac(1, mac[1]);
- pm3386_get_mac(2, mac[2]);
+ if (secondary)
+ pm3386_get_mac(2, mac[2]);
/* Assert analog and digital reset. */
pm3386_reg_write(0, 0x002, 0x0060);
- pm3386_reg_write(1, 0x002, 0x0060);
+ if (secondary)
+ pm3386_reg_write(1, 0x002, 0x0060);
mdelay(1);
/* Deassert analog reset. */
pm3386_reg_write(0, 0x002, 0x0062);
- pm3386_reg_write(1, 0x002, 0x0062);
+ if (secondary)
+ pm3386_reg_write(1, 0x002, 0x0062);
mdelay(10);
/* Deassert digital reset. */
pm3386_reg_write(0, 0x002, 0x0063);
- pm3386_reg_write(1, 0x002, 0x0063);
+ if (secondary)
+ pm3386_reg_write(1, 0x002, 0x0063);
mdelay(10);
/* Restore programmed MAC addresses. */
pm3386_set_mac(0, mac[0]);
pm3386_set_mac(1, mac[1]);
- pm3386_set_mac(2, mac[2]);
+ if (secondary)
+ pm3386_set_mac(2, mac[2]);
/* Disable carrier on all ports. */
pm3386_set_carrier(0, 0);
pm3386_set_carrier(1, 0);
- pm3386_set_carrier(2, 0);
+ if (secondary)
+ pm3386_set_carrier(2, 0);
}
static u16 swaph(u16 x)
@@ -127,6 +140,11 @@ static u16 swaph(u16 x)
return ((x << 8) | (x >> 8)) & 0xffff;
}
+int pm3386_port_count(void)
+{
+ return 2 + pm3386_secondary_present();
+}
+
void pm3386_init_port(int port)
{
int pm = port >> 1;
diff --git a/drivers/net/ixp2000/pm3386.h b/drivers/net/ixp2000/pm3386.h
index fe92bb056ac..cc4183dca91 100644
--- a/drivers/net/ixp2000/pm3386.h
+++ b/drivers/net/ixp2000/pm3386.h
@@ -13,6 +13,7 @@
#define __PM3386_H
void pm3386_reset(void);
+int pm3386_port_count(void);
void pm3386_init_port(int port);
void pm3386_get_mac(int port, u8 *mac);
void pm3386_set_mac(int port, u8 *mac);
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 93c494bcd18..b32765215f7 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -139,8 +139,9 @@ bad_clone_list[] __initdata = {
#if defined(CONFIG_PLAT_MAPPI)
# define DCR_VAL 0x4b
-#elif defined(CONFIG_PLAT_OAKS32R)
-# define DCR_VAL 0x48
+#elif defined(CONFIG_PLAT_OAKS32R) || \
+ defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+# define DCR_VAL 0x48 /* 8-bit mode */
#else
# define DCR_VAL 0x49
#endif
@@ -396,10 +397,22 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr)
/* We must set the 8390 for word mode. */
outb_p(DCR_VAL, ioaddr + EN0_DCFG);
start_page = NESM_START_PG;
- stop_page = NESM_STOP_PG;
+
+ /*
+ * Realtek RTL8019AS datasheet says that the PSTOP register
+ * shouldn't exceed 0x60 in 8-bit mode.
+ * This chip can be identified by reading the signature from
+ * the remote byte count registers (otherwise write-only)...
+ */
+ if ((DCR_VAL & 0x01) == 0 && /* 8-bit mode */
+ inb(ioaddr + EN0_RCNTLO) == 0x50 &&
+ inb(ioaddr + EN0_RCNTHI) == 0x70)
+ stop_page = 0x60;
+ else
+ stop_page = NESM_STOP_PG;
} else {
start_page = NE1SM_START_PG;
- stop_page = NE1SM_STOP_PG;
+ stop_page = NE1SM_STOP_PG;
}
#if defined(CONFIG_PLAT_MAPPI) || defined(CONFIG_PLAT_OAKS32R)
@@ -509,15 +522,9 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr)
ei_status.name = name;
ei_status.tx_start_page = start_page;
ei_status.stop_page = stop_page;
-#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
- wordlength = 1;
-#endif
-#ifdef CONFIG_PLAT_OAKS32R
- ei_status.word16 = 0;
-#else
- ei_status.word16 = (wordlength == 2);
-#endif
+ /* Use 16-bit mode only if this wasn't overridden by DCR_VAL */
+ ei_status.word16 = (wordlength == 2 && (DCR_VAL & 0x01));
ei_status.rx_start_page = start_page + TX_PAGES;
#ifdef PACKETBUF_MEMSIZE
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 459443b572c..1b236bdf6b9 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -60,8 +60,10 @@ int mdiobus_register(struct mii_bus *bus)
for (i = 0; i < PHY_MAX_ADDR; i++) {
struct phy_device *phydev;
- if (bus->phy_mask & (1 << i))
+ if (bus->phy_mask & (1 << i)) {
+ bus->phy_map[i] = NULL;
continue;
+ }
phydev = get_phy_device(bus, i);
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 3b3e1046d0a..d0587417220 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -128,6 +128,7 @@ static const struct mii_chip_info {
} mii_chip_table[] = {
{ "SiS 900 Internal MII PHY", 0x001d, 0x8000, LAN },
{ "SiS 7014 Physical Layer Solution", 0x0016, 0xf830, LAN },
+ { "SiS 900 on Foxconn 661 7MI", 0x0143, 0xBC70, LAN },
{ "Altimata AC101LF PHY", 0x0022, 0x5520, LAN },
{ "ADM 7001 LAN PHY", 0x002e, 0xcc60, LAN },
{ "AMD 79C901 10BASE-T PHY", 0x0000, 0x6B70, LAN },
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 227df9876a2..62be6d99d05 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -51,7 +51,7 @@
#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.2"
+#define DRV_VERSION "1.3"
#define PFX DRV_NAME " "
/*
@@ -79,6 +79,8 @@
#define NAPI_WEIGHT 64
#define PHY_RETRIES 1000
+#define RING_NEXT(x,s) (((x)+1) & ((s)-1))
+
static const u32 default_msg =
NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
| NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
@@ -96,6 +98,10 @@ static int disable_msi = 0;
module_param(disable_msi, int, 0);
MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
+static int idle_timeout = 100;
+module_param(idle_timeout, int, 0);
+MODULE_PARM_DESC(idle_timeout, "Idle timeout workaround for lost interrupts (ms)");
+
static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
@@ -122,6 +128,7 @@ MODULE_DEVICE_TABLE(pci, sky2_id_table);
/* Avoid conditionals by using array */
static const unsigned txqaddr[] = { Q_XA1, Q_XA2 };
static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
+static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
/* This driver supports yukon2 chipset only */
static const char *yukon2_name[] = {
@@ -298,7 +305,8 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
u16 ctrl, ct1000, adv, pg, ledctrl, ledover;
- if (sky2->autoneg == AUTONEG_ENABLE && hw->chip_id != CHIP_ID_YUKON_XL) {
+ if (sky2->autoneg == AUTONEG_ENABLE &&
+ (hw->chip_id != CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
@@ -326,7 +334,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
if (sky2->autoneg == AUTONEG_ENABLE &&
- hw->chip_id == CHIP_ID_YUKON_XL) {
+ (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
ctrl &= ~PHY_M_PC_DSC_MSK;
ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
}
@@ -442,10 +450,11 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
/* set LED Function Control register */
- gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
- PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */
- PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
- PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
+ PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */
+ PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
+ PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */
/* set Polarity Control register */
gm_phy_write(hw, port, PHY_MARV_PHY_STAT,
@@ -459,6 +468,25 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
/* restore page register */
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
break;
+ case CHIP_ID_YUKON_EC_U:
+ pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+
+ /* select page 3 to access LED control register */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
+
+ /* set LED Function Control register */
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
+ PHY_M_LEDC_INIT_CTRL(8) | /* 10 Mbps */
+ PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
+ PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */
+
+ /* set Blink Rate in LED Timer Control Register */
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK,
+ ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS));
+ /* restore page register */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+ break;
default:
/* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
@@ -467,19 +495,21 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
}
- if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == CHIP_REV_YU_EC_A1) {
/* apply fixes in PHY AFE */
- gm_phy_write(hw, port, 22, 255);
+ pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
+
/* increase differential signal amplitude in 10BASE-T */
- gm_phy_write(hw, port, 24, 0xaa99);
- gm_phy_write(hw, port, 23, 0x2011);
+ gm_phy_write(hw, port, 0x18, 0xaa99);
+ gm_phy_write(hw, port, 0x17, 0x2011);
/* fix for IEEE A/B Symmetry failure in 1000BASE-T */
- gm_phy_write(hw, port, 24, 0xa204);
- gm_phy_write(hw, port, 23, 0x2002);
+ gm_phy_write(hw, port, 0x18, 0xa204);
+ gm_phy_write(hw, port, 0x17, 0x2002);
/* set page register to 0 */
- gm_phy_write(hw, port, 22, 0);
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
} else {
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
@@ -553,6 +583,11 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
if (sky2->duplex == DUPLEX_FULL)
reg |= GM_GPCR_DUP_FULL;
+
+ /* turn off pause in 10/100mbps half duplex */
+ else if (sky2->speed != SPEED_1000 &&
+ hw->chip_id != CHIP_ID_YUKON_EC_U)
+ sky2->tx_pause = sky2->rx_pause = 0;
} else
reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL;
@@ -719,7 +754,7 @@ static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2)
{
struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod;
- sky2->tx_prod = (sky2->tx_prod + 1) % TX_RING_SIZE;
+ sky2->tx_prod = RING_NEXT(sky2->tx_prod, TX_RING_SIZE);
return le;
}
@@ -735,7 +770,7 @@ static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
{
struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put;
- sky2->rx_put = (sky2->rx_put + 1) % RX_LE_SIZE;
+ sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE);
return le;
}
@@ -985,8 +1020,19 @@ static int sky2_up(struct net_device *dev)
struct sky2_hw *hw = sky2->hw;
unsigned port = sky2->port;
u32 ramsize, rxspace, imask;
- int err = -ENOMEM;
+ int err;
+ struct net_device *otherdev = hw->dev[sky2->port^1];
+ /* Block bringing up both ports at the same time on a dual port card.
+ * There is an unfixed bug where receiver gets confused and picks up
+ * packets out of order. Until this is fixed, prevent data corruption.
+ */
+ if (otherdev && netif_running(otherdev)) {
+ printk(KERN_INFO PFX "dual port support is disabled.\n");
+ return -EBUSY;
+ }
+
+ err = -ENOMEM;
if (netif_msg_ifup(sky2))
printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
@@ -1050,7 +1096,7 @@ static int sky2_up(struct net_device *dev)
/* Enable interrupts from phy/mac for port */
imask = sky2_read32(hw, B0_IMSK);
- imask |= (port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2;
+ imask |= portirq_msk[port];
sky2_write32(hw, B0_IMSK, imask);
return 0;
@@ -1078,7 +1124,7 @@ err_out:
/* Modular subtraction in ring */
static inline int tx_dist(unsigned tail, unsigned head)
{
- return (head - tail) % TX_RING_SIZE;
+ return (head - tail) & (TX_RING_SIZE - 1);
}
/* Number of list elements available for next tx */
@@ -1255,7 +1301,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
le->opcode = OP_BUFFER | HW_OWNER;
fre = sky2->tx_ring
- + ((re - sky2->tx_ring) + i + 1) % TX_RING_SIZE;
+ + RING_NEXT((re - sky2->tx_ring) + i, TX_RING_SIZE);
pci_unmap_addr_set(fre, mapaddr, mapping);
}
@@ -1315,7 +1361,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
struct tx_ring_info *fre;
- fre = sky2->tx_ring + (put + i + 1) % TX_RING_SIZE;
+ fre = sky2->tx_ring + RING_NEXT(put + i, TX_RING_SIZE);
pci_unmap_page(pdev, pci_unmap_addr(fre, mapaddr),
skb_shinfo(skb)->frags[i].size,
PCI_DMA_TODEVICE);
@@ -1401,7 +1447,7 @@ static int sky2_down(struct net_device *dev)
/* Disable port IRQ */
imask = sky2_read32(hw, B0_IMSK);
- imask &= ~(sky2->port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2;
+ imask &= ~portirq_msk[port];
sky2_write32(hw, B0_IMSK, imask);
/* turn off LED's */
@@ -1498,17 +1544,26 @@ static void sky2_link_up(struct sky2_port *sky2)
sky2_write8(hw, SK_REG(port, LNK_LED_REG),
LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
- if (hw->chip_id == CHIP_ID_YUKON_XL) {
+ if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U) {
u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+ u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */
+
+ switch(sky2->speed) {
+ case SPEED_10:
+ led |= PHY_M_LEDC_INIT_CTRL(7);
+ break;
+
+ case SPEED_100:
+ led |= PHY_M_LEDC_STA1_CTRL(7);
+ break;
+
+ case SPEED_1000:
+ led |= PHY_M_LEDC_STA0_CTRL(7);
+ break;
+ }
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
- gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
- PHY_M_LEDC_INIT_CTRL(sky2->speed ==
- SPEED_10 ? 7 : 0) |
- PHY_M_LEDC_STA1_CTRL(sky2->speed ==
- SPEED_100 ? 7 : 0) |
- PHY_M_LEDC_STA0_CTRL(sky2->speed ==
- SPEED_1000 ? 7 : 0));
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, led);
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
}
@@ -1583,7 +1638,7 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
sky2->speed = sky2_phy_speed(hw, aux);
/* Pause bits are offset (9..8) */
- if (hw->chip_id == CHIP_ID_YUKON_XL)
+ if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)
aux >>= 6;
sky2->rx_pause = (aux & PHY_M_PS_RX_P_EN) != 0;
@@ -1859,35 +1914,28 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
static int sky2_status_intr(struct sky2_hw *hw, int to_do)
{
int work_done = 0;
+ u16 hwidx = sky2_read16(hw, STAT_PUT_IDX);
rmb();
- for(;;) {
+ while (hw->st_idx != hwidx) {
struct sky2_status_le *le = hw->st_le + hw->st_idx;
struct net_device *dev;
struct sky2_port *sky2;
struct sk_buff *skb;
u32 status;
u16 length;
- u8 link, opcode;
-
- opcode = le->opcode;
- if (!opcode)
- break;
- opcode &= ~HW_OWNER;
- hw->st_idx = (hw->st_idx + 1) % STATUS_RING_SIZE;
- le->opcode = 0;
+ hw->st_idx = RING_NEXT(hw->st_idx, STATUS_RING_SIZE);
- link = le->link;
- BUG_ON(link >= 2);
- dev = hw->dev[link];
+ BUG_ON(le->link >= 2);
+ dev = hw->dev[le->link];
sky2 = netdev_priv(dev);
length = le->length;
status = le->status;
- switch (opcode) {
+ switch (le->opcode & ~HW_OWNER) {
case OP_RXSTAT:
skb = sky2_receive(sky2, length, status);
if (!skb)
@@ -1927,7 +1975,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
case OP_TXINDEXLE:
/* TX index reports status for both ports */
- sky2_tx_done(hw->dev[0], status & 0xffff);
+ BUILD_BUG_ON(TX_RING_SIZE > 0x1000);
+ sky2_tx_done(hw->dev[0], status & 0xfff);
if (hw->dev[1])
sky2_tx_done(hw->dev[1],
((status >> 24) & 0xff)
@@ -1937,8 +1986,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
default:
if (net_ratelimit())
printk(KERN_WARNING PFX
- "unknown status opcode 0x%x\n", opcode);
- break;
+ "unknown status opcode 0x%x\n", le->opcode);
+ goto exit_loop;
}
}
@@ -2089,12 +2138,13 @@ static void sky2_descriptor_error(struct sky2_hw *hw, unsigned port,
*/
static void sky2_idle(unsigned long arg)
{
- struct net_device *dev = (struct net_device *) arg;
+ struct sky2_hw *hw = (struct sky2_hw *) arg;
+ struct net_device *dev = hw->dev[0];
- local_irq_disable();
if (__netif_rx_schedule_prep(dev))
__netif_rx_schedule(dev);
- local_irq_enable();
+
+ mod_timer(&hw->idle_timer, jiffies + msecs_to_jiffies(idle_timeout));
}
@@ -2105,65 +2155,46 @@ static int sky2_poll(struct net_device *dev0, int *budget)
int work_done = 0;
u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
- restart_poll:
- if (unlikely(status & ~Y2_IS_STAT_BMU)) {
- if (status & Y2_IS_HW_ERR)
- sky2_hw_intr(hw);
-
- if (status & Y2_IS_IRQ_PHY1)
- sky2_phy_intr(hw, 0);
+ if (status & Y2_IS_HW_ERR)
+ sky2_hw_intr(hw);
- if (status & Y2_IS_IRQ_PHY2)
- sky2_phy_intr(hw, 1);
+ if (status & Y2_IS_IRQ_PHY1)
+ sky2_phy_intr(hw, 0);
- if (status & Y2_IS_IRQ_MAC1)
- sky2_mac_intr(hw, 0);
+ if (status & Y2_IS_IRQ_PHY2)
+ sky2_phy_intr(hw, 1);
- if (status & Y2_IS_IRQ_MAC2)
- sky2_mac_intr(hw, 1);
+ if (status & Y2_IS_IRQ_MAC1)
+ sky2_mac_intr(hw, 0);
- if (status & Y2_IS_CHK_RX1)
- sky2_descriptor_error(hw, 0, "receive", Y2_IS_CHK_RX1);
+ if (status & Y2_IS_IRQ_MAC2)
+ sky2_mac_intr(hw, 1);
- if (status & Y2_IS_CHK_RX2)
- sky2_descriptor_error(hw, 1, "receive", Y2_IS_CHK_RX2);
+ if (status & Y2_IS_CHK_RX1)
+ sky2_descriptor_error(hw, 0, "receive", Y2_IS_CHK_RX1);
- if (status & Y2_IS_CHK_TXA1)
- sky2_descriptor_error(hw, 0, "transmit", Y2_IS_CHK_TXA1);
+ if (status & Y2_IS_CHK_RX2)
+ sky2_descriptor_error(hw, 1, "receive", Y2_IS_CHK_RX2);
- if (status & Y2_IS_CHK_TXA2)
- sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
- }
-
- if (status & Y2_IS_STAT_BMU) {
- work_done += sky2_status_intr(hw, work_limit - work_done);
- *budget -= work_done;
- dev0->quota -= work_done;
+ if (status & Y2_IS_CHK_TXA1)
+ sky2_descriptor_error(hw, 0, "transmit", Y2_IS_CHK_TXA1);
- if (work_done >= work_limit)
- return 1;
+ if (status & Y2_IS_CHK_TXA2)
+ sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
+ if (status & Y2_IS_STAT_BMU)
sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
- }
- mod_timer(&hw->idle_timer, jiffies + HZ);
+ work_done = sky2_status_intr(hw, work_limit);
+ *budget -= work_done;
+ dev0->quota -= work_done;
- local_irq_disable();
- __netif_rx_complete(dev0);
+ if (work_done >= work_limit)
+ return 1;
- status = sky2_read32(hw, B0_Y2_SP_LISR);
-
- if (unlikely(status)) {
- /* More work pending, try and keep going */
- if (__netif_rx_schedule_prep(dev0)) {
- __netif_rx_reschedule(dev0, work_done);
- status = sky2_read32(hw, B0_Y2_SP_EISR);
- local_irq_enable();
- goto restart_poll;
- }
- }
+ netif_rx_complete(dev0);
- local_irq_enable();
+ status = sky2_read32(hw, B0_Y2_SP_LISR);
return 0;
}
@@ -2244,13 +2275,6 @@ static int __devinit sky2_reset(struct sky2_hw *hw)
return -EOPNOTSUPP;
}
- /* This chip is new and not tested yet */
- if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
- pr_info(PFX "%s: is a version of Yukon 2 chipset that has not been tested yet.\n",
- pci_name(hw->pdev));
- pr_info("Please report success/failure to maintainer <shemminger@osdl.org>\n");
- }
-
/* disable ASF */
if (hw->chip_id <= CHIP_ID_YUKON_EC) {
sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
@@ -3302,7 +3326,10 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
- setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) dev);
+ setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw);
+ if (idle_timeout > 0)
+ mod_timer(&hw->idle_timer,
+ jiffies + msecs_to_jiffies(idle_timeout));
pci_set_drvdata(pdev, hw);
@@ -3342,6 +3369,8 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
del_timer_sync(&hw->idle_timer);
sky2_write32(hw, B0_IMSK, 0);
+ synchronize_irq(hw->pdev->irq);
+
dev0 = hw->dev[0];
dev1 = hw->dev[1];
if (dev1)
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index b026f5653f0..8012994c9b9 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -378,6 +378,9 @@ enum {
CHIP_REV_YU_EC_A1 = 0, /* Chip Rev. for Yukon-EC A1/A0 */
CHIP_REV_YU_EC_A2 = 1, /* Chip Rev. for Yukon-EC A2 */
CHIP_REV_YU_EC_A3 = 2, /* Chip Rev. for Yukon-EC A3 */
+
+ CHIP_REV_YU_EC_U_A0 = 0,
+ CHIP_REV_YU_EC_U_A1 = 1,
};
/* B2_Y2_CLK_GATE 8 bit Clock Gating (Yukon-2 only) */
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 43f5e86fc55..394339d5e87 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -1652,6 +1652,8 @@ spider_net_enable_card(struct spider_net_card *card)
{ SPIDER_NET_GFTRESTRT, SPIDER_NET_RESTART_VALUE },
{ SPIDER_NET_GMRWOLCTRL, 0 },
+ { SPIDER_NET_GTESTMD, 0x10000000 },
+ { SPIDER_NET_GTTQMSK, 0x00400040 },
{ SPIDER_NET_GTESTMD, 0 },
{ SPIDER_NET_GMACINTEN, 0 },
@@ -1792,15 +1794,7 @@ spider_net_setup_phy(struct spider_net_card *card)
if (phy->def->ops->setup_forced)
phy->def->ops->setup_forced(phy, SPEED_1000, DUPLEX_FULL);
- /* the following two writes could be moved to sungem_phy.c */
- /* enable fiber mode */
- spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0x9020);
- /* LEDs active in both modes, autosense prio = fiber */
- spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0x945f);
-
- /* switch off fibre autoneg */
- spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0xfc01);
- spider_net_write_phy(card->netdev, 1, 0x0b, 0x0004);
+ phy->def->ops->enable_fiber(phy);
phy->def->ops->read_link(phy);
pr_info("Found %s with %i Mbps, %s-duplex.\n", phy->def->name,
diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h
index 5922b529a04..3b8d951cf73 100644
--- a/drivers/net/spider_net.h
+++ b/drivers/net/spider_net.h
@@ -120,6 +120,8 @@ extern char spider_net_driver_name[];
#define SPIDER_NET_GMRUAFILnR 0x00000500
#define SPIDER_NET_GMRUA0FIL15R 0x00000578
+#define SPIDER_NET_GTTQMSK 0x00000934
+
/* RX DMA controller registers, all 0x00000a.. are for DMA controller A,
* 0x00000b.. for DMA controller B, etc. */
#define SPIDER_NET_GDADCHA 0x00000a00
diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
index 046371ee5bb..b2ddd5e7930 100644
--- a/drivers/net/sungem_phy.c
+++ b/drivers/net/sungem_phy.c
@@ -329,6 +329,30 @@ static int bcm5421_init(struct mii_phy* phy)
return 0;
}
+static int bcm5421_enable_fiber(struct mii_phy* phy)
+{
+ /* enable fiber mode */
+ phy_write(phy, MII_NCONFIG, 0x9020);
+ /* LEDs active in both modes, autosense prio = fiber */
+ phy_write(phy, MII_NCONFIG, 0x945f);
+
+ /* switch off fibre autoneg */
+ phy_write(phy, MII_NCONFIG, 0xfc01);
+ phy_write(phy, 0x0b, 0x0004);
+
+ return 0;
+}
+
+static int bcm5461_enable_fiber(struct mii_phy* phy)
+{
+ phy_write(phy, MII_NCONFIG, 0xfc0c);
+ phy_write(phy, MII_BMCR, 0x4140);
+ phy_write(phy, MII_NCONFIG, 0xfc0b);
+ phy_write(phy, MII_BMCR, 0x0140);
+
+ return 0;
+}
+
static int bcm54xx_setup_aneg(struct mii_phy *phy, u32 advertise)
{
u16 ctl, adv;
@@ -762,6 +786,7 @@ static struct mii_phy_ops bcm5421_phy_ops = {
.setup_forced = bcm54xx_setup_forced,
.poll_link = genmii_poll_link,
.read_link = bcm54xx_read_link,
+ .enable_fiber = bcm5421_enable_fiber,
};
static struct mii_phy_def bcm5421_phy_def = {
@@ -792,6 +817,25 @@ static struct mii_phy_def bcm5421k2_phy_def = {
.ops = &bcm5421k2_phy_ops
};
+static struct mii_phy_ops bcm5461_phy_ops = {
+ .init = bcm5421_init,
+ .suspend = generic_suspend,
+ .setup_aneg = bcm54xx_setup_aneg,
+ .setup_forced = bcm54xx_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = bcm54xx_read_link,
+ .enable_fiber = bcm5461_enable_fiber,
+};
+
+static struct mii_phy_def bcm5461_phy_def = {
+ .phy_id = 0x002060c0,
+ .phy_id_mask = 0xfffffff0,
+ .name = "BCM5461",
+ .features = MII_GBIT_FEATURES,
+ .magic_aneg = 1,
+ .ops = &bcm5461_phy_ops
+};
+
/* Broadcom BCM 5462 built-in Vesta */
static struct mii_phy_ops bcm5462V_phy_ops = {
.init = bcm5421_init,
@@ -857,6 +901,7 @@ static struct mii_phy_def* mii_phy_table[] = {
&bcm5411_phy_def,
&bcm5421_phy_def,
&bcm5421k2_phy_def,
+ &bcm5461_phy_def,
&bcm5462V_phy_def,
&marvell_phy_def,
&genmii_phy_def,
diff --git a/drivers/net/sungem_phy.h b/drivers/net/sungem_phy.h
index 430544496c5..69e125197fc 100644
--- a/drivers/net/sungem_phy.h
+++ b/drivers/net/sungem_phy.h
@@ -12,6 +12,7 @@ struct mii_phy_ops
int (*setup_forced)(struct mii_phy *phy, int speed, int fd);
int (*poll_link)(struct mii_phy *phy);
int (*read_link)(struct mii_phy *phy);
+ int (*enable_fiber)(struct mii_phy *phy);
};
/* Structure used to statically define an mii/gii based PHY */
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index beeb612be98..e1b33a25a25 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7653,21 +7653,23 @@ static int tg3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->supported |= (SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
- if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
+ if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)) {
cmd->supported |= (SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_MII);
- else
+ cmd->port = PORT_TP;
+ } else {
cmd->supported |= SUPPORTED_FIBRE;
+ cmd->port = PORT_FIBRE;
+ }
cmd->advertising = tp->link_config.advertising;
if (netif_running(dev)) {
cmd->speed = tp->link_config.active_speed;
cmd->duplex = tp->link_config.active_duplex;
}
- cmd->port = 0;
cmd->phy_address = PHY_ADDR;
cmd->transceiver = 0;
cmd->autoneg = tp->link_config.autoneg;
@@ -8454,6 +8456,9 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
tx_len = 1514;
skb = dev_alloc_skb(tx_len);
+ if (!skb)
+ return -ENOMEM;
+
tx_data = skb_put(skb, tx_len);
memcpy(tx_data, tp->dev->dev_addr, 6);
memset(tx_data + 6, 0x0, 8);
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index 19852866072..8d0f61816c1 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -939,9 +939,9 @@ static int bcm43xx_sprom_extract(struct bcm43xx_private *bcm)
return 0;
}
-static void bcm43xx_geo_init(struct bcm43xx_private *bcm)
+static int bcm43xx_geo_init(struct bcm43xx_private *bcm)
{
- struct ieee80211_geo geo;
+ struct ieee80211_geo *geo;
struct ieee80211_channel *chan;
int have_a = 0, have_bg = 0;
int i;
@@ -949,7 +949,10 @@ static void bcm43xx_geo_init(struct bcm43xx_private *bcm)
struct bcm43xx_phyinfo *phy;
const char *iso_country;
- memset(&geo, 0, sizeof(geo));
+ geo = kzalloc(sizeof(*geo), GFP_KERNEL);
+ if (!geo)
+ return -ENOMEM;
+
for (i = 0; i < bcm->nr_80211_available; i++) {
phy = &(bcm->core_80211_ext[i].phy);
switch (phy->type) {
@@ -967,31 +970,36 @@ static void bcm43xx_geo_init(struct bcm43xx_private *bcm)
iso_country = bcm43xx_locale_iso(bcm->sprom.locale);
if (have_a) {
- for (i = 0, channel = 0; channel < 201; channel++) {
- chan = &geo.a[i++];
+ for (i = 0, channel = IEEE80211_52GHZ_MIN_CHANNEL;
+ channel <= IEEE80211_52GHZ_MAX_CHANNEL; channel++) {
+ chan = &geo->a[i++];
chan->freq = bcm43xx_channel_to_freq_a(channel);
chan->channel = channel;
}
- geo.a_channels = i;
+ geo->a_channels = i;
}
if (have_bg) {
- for (i = 0, channel = 1; channel < 15; channel++) {
- chan = &geo.bg[i++];
+ for (i = 0, channel = IEEE80211_24GHZ_MIN_CHANNEL;
+ channel <= IEEE80211_24GHZ_MAX_CHANNEL; channel++) {
+ chan = &geo->bg[i++];
chan->freq = bcm43xx_channel_to_freq_bg(channel);
chan->channel = channel;
}
- geo.bg_channels = i;
+ geo->bg_channels = i;
}
- memcpy(geo.name, iso_country, 2);
+ memcpy(geo->name, iso_country, 2);
if (0 /*TODO: Outdoor use only */)
- geo.name[2] = 'O';
+ geo->name[2] = 'O';
else if (0 /*TODO: Indoor use only */)
- geo.name[2] = 'I';
+ geo->name[2] = 'I';
else
- geo.name[2] = ' ';
- geo.name[3] = '\0';
+ geo->name[2] = ' ';
+ geo->name[3] = '\0';
+
+ ieee80211_set_geo(bcm->ieee, geo);
+ kfree(geo);
- ieee80211_set_geo(bcm->ieee, &geo);
+ return 0;
}
/* DummyTransmission function, as documented on
@@ -3464,16 +3472,17 @@ static int bcm43xx_attach_board(struct bcm43xx_private *bcm)
goto err_80211_unwind;
bcm43xx_wireless_core_disable(bcm);
}
+ err = bcm43xx_geo_init(bcm);
+ if (err)
+ goto err_80211_unwind;
bcm43xx_pctl_set_crystal(bcm, 0);
/* Set the MAC address in the networking subsystem */
- if (bcm43xx_current_phy(bcm)->type == BCM43xx_PHYTYPE_A)
+ if (is_valid_ether_addr(bcm->sprom.et1macaddr))
memcpy(bcm->net_dev->dev_addr, bcm->sprom.et1macaddr, 6);
else
memcpy(bcm->net_dev->dev_addr, bcm->sprom.il0macaddr, 6);
- bcm43xx_geo_init(bcm);
-
snprintf(bcm->nick, IW_ESSID_MAX_SIZE,
"Broadcom %04X", bcm->chip_id);
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.h b/drivers/net/wireless/bcm43xx/bcm43xx_main.h
index eca79a38594..30a202b258b 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.h
@@ -118,12 +118,14 @@ int bcm43xx_channel_to_freq(struct bcm43xx_private *bcm,
static inline
int bcm43xx_is_valid_channel_a(u8 channel)
{
- return (channel <= 200);
+ return (channel >= IEEE80211_52GHZ_MIN_CHANNEL
+ && channel <= IEEE80211_52GHZ_MAX_CHANNEL);
}
static inline
int bcm43xx_is_valid_channel_bg(u8 channel)
{
- return (channel >= 1 && channel <= 14);
+ return (channel >= IEEE80211_24GHZ_MIN_CHANNEL
+ && channel <= IEEE80211_24GHZ_MAX_CHANNEL);
}
static inline
int bcm43xx_is_valid_channel(struct bcm43xx_private *bcm,
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
index 33137165727..b0abac51553 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
@@ -1287,7 +1287,7 @@ static void bcm43xx_phy_initg(struct bcm43xx_private *bcm)
if (radio->revision == 8)
bcm43xx_phy_write(bcm, 0x0805, 0x3230);
bcm43xx_phy_init_pctl(bcm);
- if (bcm->chip_id == 0x4306 && bcm->chip_package != 2) {
+ if (bcm->chip_id == 0x4306 && bcm->chip_package == 2) {
bcm43xx_phy_write(bcm, 0x0429,
bcm43xx_phy_read(bcm, 0x0429) & 0xBFFF);
bcm43xx_phy_write(bcm, 0x04C3,
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
index 3edbb481a0a..b45063974ae 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
@@ -182,8 +182,11 @@ static int bcm43xx_wx_set_mode(struct net_device *net_dev,
mode = BCM43xx_INITIAL_IWMODE;
bcm43xx_lock_mmio(bcm, flags);
- if (bcm->ieee->iw_mode != mode)
- bcm43xx_set_iwmode(bcm, mode);
+ if (bcm->initialized) {
+ if (bcm->ieee->iw_mode != mode)
+ bcm43xx_set_iwmode(bcm, mode);
+ } else
+ bcm->ieee->iw_mode = mode;
bcm43xx_unlock_mmio(bcm, flags);
return 0;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 19e2b174d33..d378478612f 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -634,6 +634,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vi
* non-x86 architectures (yes Via exists on PPC among other places),
* we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
* interrupts delivered properly.
+ *
+ * Some of the on-chip devices are actually '586 devices' so they are
+ * listed here.
*/
static void quirk_via_irq(struct pci_dev *dev)
{
@@ -648,6 +651,10 @@ static void quirk_via_irq(struct pci_dev *dev)
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
}
}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_irq);
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq);
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq);
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq);
@@ -895,6 +902,7 @@ static void __init k8t_sound_hostbridge(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);
+#ifndef CONFIG_ACPI_SLEEP
/*
* On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
* is not activated. The myth is that Asus said that they do not want the
@@ -906,8 +914,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_ho
* bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
* becomes necessary to do this tweak in two steps -- I've chosen the Host
* bridge as trigger.
+ *
+ * Actually, leaving it unhidden and not redoing the quirk over suspend2ram
+ * will cause thermal management to break down, and causing machine to
+ * overheat.
*/
-static int __initdata asus_hides_smbus = 0;
+static int __initdata asus_hides_smbus;
static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
{
@@ -1050,6 +1062,8 @@ static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6 );
+#endif
+
/*
* SiS 96x south bridge: BIOS typically hides SMBus device...
*/
diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c
index c53db7ceda5..738b1ef595a 100644
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ b/drivers/pcmcia/pcmcia_ioctl.c
@@ -426,7 +426,7 @@ static int ds_open(struct inode *inode, struct file *file)
if (!warning_printed) {
printk(KERN_INFO "pcmcia: Detected deprecated PCMCIA ioctl "
- "usage.\n");
+ "usage from process: %s.\n", current->comm);
printk(KERN_INFO "pcmcia: This interface will soon be removed from "
"the kernel; please expect breakage unless you upgrade "
"to new tools.\n");
@@ -601,8 +601,12 @@ static int ds_ioctl(struct inode * inode, struct file * file,
ret = CS_BAD_ARGS;
else {
struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->config.Function);
- ret = pccard_get_configuration_info(s, p_dev, &buf->config);
- pcmcia_put_dev(p_dev);
+ if (p_dev == NULL)
+ ret = CS_BAD_ARGS;
+ else {
+ ret = pccard_get_configuration_info(s, p_dev, &buf->config);
+ pcmcia_put_dev(p_dev);
+ }
}
break;
case DS_GET_FIRST_TUPLE:
@@ -632,8 +636,12 @@ static int ds_ioctl(struct inode * inode, struct file * file,
ret = CS_BAD_ARGS;
else {
struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->status.Function);
- ret = pccard_get_status(s, p_dev, &buf->status);
- pcmcia_put_dev(p_dev);
+ if (p_dev == NULL)
+ ret = CS_BAD_ARGS;
+ else {
+ ret = pccard_get_status(s, p_dev, &buf->status);
+ pcmcia_put_dev(p_dev);
+ }
}
break;
case DS_VALIDATE_CIS:
@@ -665,9 +673,10 @@ static int ds_ioctl(struct inode * inode, struct file * file,
if (!(buf->conf_reg.Function &&
(buf->conf_reg.Function >= s->functions))) {
struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->conf_reg.Function);
- if (p_dev)
+ if (p_dev) {
ret = pcmcia_access_configuration_register(p_dev, &buf->conf_reg);
- pcmcia_put_dev(p_dev);
+ pcmcia_put_dev(p_dev);
+ }
}
break;
case DS_GET_FIRST_REGION:
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index a23ec54989f..2bc8aad4721 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -178,9 +178,9 @@ static int sa1100_rtc_open(struct device *dev)
return 0;
fail_pi:
- free_irq(IRQ_RTCAlrm, NULL);
+ free_irq(IRQ_RTCAlrm, dev);
fail_ai:
- free_irq(IRQ_RTC1Hz, NULL);
+ free_irq(IRQ_RTC1Hz, dev);
fail_ui:
return ret;
}
@@ -295,7 +295,7 @@ static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
{
- seq_printf(seq, "trim/divider\t: 0x%08x\n", RTTR);
+ seq_printf(seq, "trim/divider\t: 0x%08lx\n", RTTR);
seq_printf(seq, "alarm_IRQ\t: %s\n",
(RTSR & RTSR_ALE) ? "yes" : "no" );
seq_printf(seq, "update_IRQ\t: %s\n",
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 5d6b7a57b02..e65da921a82 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -1348,7 +1348,7 @@ lcs_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
index = (struct ccw1 *) __va((addr_t) irb->scsw.cpa)
- channel->ccws;
if ((irb->scsw.actl & SCSW_ACTL_SUSPENDED) ||
- (irb->scsw.cstat | SCHN_STAT_PCI))
+ (irb->scsw.cstat & SCHN_STAT_PCI))
/* Bloody io subsystem tells us lies about cpa... */
index = (index - 1) & (LCS_NUM_BUFFS - 1);
while (channel->io_idx != index) {
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index 383a95f34a0..239e108b8ed 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -392,13 +392,16 @@ static int openprom_bsd_ioctl(struct inode * inode, struct file * file,
return -ENOMEM;
}
- prom_getproperty(op.op_nodeid, str, tmp, len);
-
- tmp[len] = '\0';
+ cnt = prom_getproperty(op.op_nodeid, str, tmp, len);
+ if (cnt <= 0) {
+ error = -EINVAL;
+ } else {
+ tmp[len] = '\0';
- if (__copy_to_user(argp, &op, sizeof(op)) != 0
- || copy_to_user(op.op_buf, tmp, len) != 0)
- error = -EFAULT;
+ if (__copy_to_user(argp, &op, sizeof(op)) != 0 ||
+ copy_to_user(op.op_buf, tmp, len) != 0)
+ error = -EFAULT;
+ }
kfree(tmp);
kfree(str);
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
index cb30d9c1153..0c9c2f400bf 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
@@ -219,6 +219,7 @@ ahc_linux_pci_dev_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
ahc->flags |= AHC_39BIT_ADDRESSING;
} else {
if (dma_set_mask(dev, DMA_32BIT_MASK)) {
+ ahc_free(ahc);
printk(KERN_WARNING "aic7xxx: No suitable DMA available.\n");
return (-ENODEV);
}
diff --git a/drivers/scsi/aic7xxx/aic7xxx_pci.c b/drivers/scsi/aic7xxx/aic7xxx_pci.c
index 5f586140e05..3adecef2178 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_pci.c
@@ -2036,12 +2036,12 @@ ahc_pci_resume(struct ahc_softc *ahc)
* that the OS doesn't know about and rely on our chip
* reset handler to handle the rest.
*/
- ahc_pci_write_config(ahc->dev_softc, DEVCONFIG, /*bytes*/4,
- ahc->bus_softc.pci_softc.devconfig);
- ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND, /*bytes*/1,
- ahc->bus_softc.pci_softc.command);
- ahc_pci_write_config(ahc->dev_softc, CSIZE_LATTIME, /*bytes*/1,
- ahc->bus_softc.pci_softc.csize_lattime);
+ ahc_pci_write_config(ahc->dev_softc, DEVCONFIG,
+ ahc->bus_softc.pci_softc.devconfig, /*bytes*/4);
+ ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND,
+ ahc->bus_softc.pci_softc.command, /*bytes*/1);
+ ahc_pci_write_config(ahc->dev_softc, CSIZE_LATTIME,
+ ahc->bus_softc.pci_softc.csize_lattime, /*bytes*/1);
if ((ahc->flags & AHC_HAS_TERM_LOGIC) != 0) {
struct seeprom_descriptor sd;
u_int sxfrctl1;
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 0a8ad37ae89..2e9be83a697 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -739,7 +739,8 @@ static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
{
struct viosrp_adapter_info *req;
struct srp_event_struct *evt_struct;
-
+ dma_addr_t addr;
+
evt_struct = get_event_struct(&hostdata->pool);
if (!evt_struct) {
printk(KERN_ERR "ibmvscsi: couldn't allocate an event "
@@ -757,10 +758,10 @@ static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
req->common.type = VIOSRP_ADAPTER_INFO_TYPE;
req->common.length = sizeof(hostdata->madapter_info);
- req->buffer = dma_map_single(hostdata->dev,
- &hostdata->madapter_info,
- sizeof(hostdata->madapter_info),
- DMA_BIDIRECTIONAL);
+ req->buffer = addr = dma_map_single(hostdata->dev,
+ &hostdata->madapter_info,
+ sizeof(hostdata->madapter_info),
+ DMA_BIDIRECTIONAL);
if (dma_mapping_error(req->buffer)) {
printk(KERN_ERR
@@ -770,8 +771,13 @@ static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
return;
}
- if (ibmvscsi_send_srp_event(evt_struct, hostdata))
+ if (ibmvscsi_send_srp_event(evt_struct, hostdata)) {
printk(KERN_ERR "ibmvscsi: couldn't send ADAPTER_INFO_REQ!\n");
+ dma_unmap_single(hostdata->dev,
+ addr,
+ sizeof(hostdata->madapter_info),
+ DMA_BIDIRECTIONAL);
+ }
};
/**
@@ -1259,6 +1265,7 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
{
struct viosrp_host_config *host_config;
struct srp_event_struct *evt_struct;
+ dma_addr_t addr;
int rc;
evt_struct = get_event_struct(&hostdata->pool);
@@ -1279,8 +1286,9 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
memset(host_config, 0x00, sizeof(*host_config));
host_config->common.type = VIOSRP_HOST_CONFIG_TYPE;
host_config->common.length = length;
- host_config->buffer = dma_map_single(hostdata->dev, buffer, length,
- DMA_BIDIRECTIONAL);
+ host_config->buffer = addr = dma_map_single(hostdata->dev, buffer,
+ length,
+ DMA_BIDIRECTIONAL);
if (dma_mapping_error(host_config->buffer)) {
printk(KERN_ERR
@@ -1291,11 +1299,9 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
init_completion(&evt_struct->comp);
rc = ibmvscsi_send_srp_event(evt_struct, hostdata);
- if (rc == 0) {
+ if (rc == 0)
wait_for_completion(&evt_struct->comp);
- dma_unmap_single(hostdata->dev, host_config->buffer,
- length, DMA_BIDIRECTIONAL);
- }
+ dma_unmap_single(hostdata->dev, addr, length, DMA_BIDIRECTIONAL);
return rc;
}
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index fad607b2e6f..ee22173fce4 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -27,7 +27,6 @@ void lpfc_config_link(struct lpfc_hba *, LPFC_MBOXQ_t *);
int lpfc_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_read_config(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_read_lnk_stat(struct lpfc_hba *, LPFC_MBOXQ_t *);
-void lpfc_set_slim(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t);
int lpfc_reg_login(struct lpfc_hba *, uint32_t, uint8_t *, LPFC_MBOXQ_t *,
uint32_t);
void lpfc_unreg_login(struct lpfc_hba *, uint32_t, LPFC_MBOXQ_t *);
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
index 8932b1be2b6..41cf5d3ea6c 100644
--- a/drivers/scsi/lpfc/lpfc_disc.h
+++ b/drivers/scsi/lpfc/lpfc_disc.h
@@ -113,6 +113,7 @@ struct lpfc_nodelist {
#define NLP_NPR_ADISC 0x2000000 /* Issue ADISC when dq'ed from
NPR list */
#define NLP_DELAY_REMOVE 0x4000000 /* Defer removal till end of DSM */
+#define NLP_NODEV_REMOVE 0x8000000 /* Defer removal till discovery ends */
/* Defines for list searchs */
#define NLP_SEARCH_MAPPED 0x1 /* search mapped */
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 4813beaaca8..283b7d824c3 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -302,10 +302,6 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
if (lpfc_reg_login(phba, Fabric_DID, (uint8_t *) sp, mbox, 0))
goto fail_free_mbox;
- /*
- * set_slim mailbox command needs to execute first,
- * queue this command to be processed later.
- */
mbox->mbox_cmpl = lpfc_mbx_cmpl_fabric_reg_login;
mbox->context2 = ndlp;
@@ -781,25 +777,26 @@ lpfc_cmpl_els_plogi(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
if (disc && phba->num_disc_nodes) {
/* Check to see if there are more PLOGIs to be sent */
lpfc_more_plogi(phba);
- }
- if (phba->num_disc_nodes == 0) {
- spin_lock_irq(phba->host->host_lock);
- phba->fc_flag &= ~FC_NDISC_ACTIVE;
- spin_unlock_irq(phba->host->host_lock);
+ if (phba->num_disc_nodes == 0) {
+ spin_lock_irq(phba->host->host_lock);
+ phba->fc_flag &= ~FC_NDISC_ACTIVE;
+ spin_unlock_irq(phba->host->host_lock);
- lpfc_can_disctmo(phba);
- if (phba->fc_flag & FC_RSCN_MODE) {
- /* Check to see if more RSCNs came in while we were
- * processing this one.
- */
- if ((phba->fc_rscn_id_cnt == 0) &&
- (!(phba->fc_flag & FC_RSCN_DISCOVERY))) {
- spin_lock_irq(phba->host->host_lock);
- phba->fc_flag &= ~FC_RSCN_MODE;
- spin_unlock_irq(phba->host->host_lock);
- } else {
- lpfc_els_handle_rscn(phba);
+ lpfc_can_disctmo(phba);
+ if (phba->fc_flag & FC_RSCN_MODE) {
+ /*
+ * Check to see if more RSCNs came in while
+ * we were processing this one.
+ */
+ if ((phba->fc_rscn_id_cnt == 0) &&
+ (!(phba->fc_flag & FC_RSCN_DISCOVERY))) {
+ spin_lock_irq(phba->host->host_lock);
+ phba->fc_flag &= ~FC_RSCN_MODE;
+ spin_unlock_irq(phba->host->host_lock);
+ } else {
+ lpfc_els_handle_rscn(phba);
+ }
}
}
}
@@ -1263,7 +1260,7 @@ lpfc_issue_els_logo(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp,
psli = &phba->sli;
pring = &psli->ring[LPFC_ELS_RING];
- cmdsize = 2 * (sizeof (uint32_t) + sizeof (struct lpfc_name));
+ cmdsize = (2 * sizeof (uint32_t)) + sizeof (struct lpfc_name);
elsiocb = lpfc_prep_els_iocb(phba, 1, cmdsize, retry, ndlp,
ndlp->nlp_DID, ELS_CMD_LOGO);
if (!elsiocb)
@@ -1451,22 +1448,23 @@ lpfc_cancel_retry_delay_tmo(struct lpfc_hba *phba, struct lpfc_nodelist * nlp)
* PLOGIs to be sent
*/
lpfc_more_plogi(phba);
- }
- if (phba->num_disc_nodes == 0) {
- phba->fc_flag &= ~FC_NDISC_ACTIVE;
- lpfc_can_disctmo(phba);
- if (phba->fc_flag & FC_RSCN_MODE) {
- /* Check to see if more RSCNs
- * came in while we were
- * processing this one.
- */
- if((phba->fc_rscn_id_cnt==0) &&
- (!(phba->fc_flag & FC_RSCN_DISCOVERY))) {
- phba->fc_flag &= ~FC_RSCN_MODE;
- }
- else {
- lpfc_els_handle_rscn(phba);
+ if (phba->num_disc_nodes == 0) {
+ phba->fc_flag &= ~FC_NDISC_ACTIVE;
+ lpfc_can_disctmo(phba);
+ if (phba->fc_flag & FC_RSCN_MODE) {
+ /*
+ * Check to see if more RSCNs
+ * came in while we were
+ * processing this one.
+ */
+ if((phba->fc_rscn_id_cnt==0) &&
+ !(phba->fc_flag & FC_RSCN_DISCOVERY)) {
+ phba->fc_flag &= ~FC_RSCN_MODE;
+ }
+ else {
+ lpfc_els_handle_rscn(phba);
+ }
}
}
}
@@ -1872,9 +1870,6 @@ lpfc_cmpl_els_acc(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
if (mbox) {
if ((rspiocb->iocb.ulpStatus == 0)
&& (ndlp->nlp_flag & NLP_ACC_REGLOGIN)) {
- /* set_slim mailbox command needs to execute first,
- * queue this command to be processed later.
- */
lpfc_unreg_rpi(phba, ndlp);
mbox->mbox_cmpl = lpfc_mbx_cmpl_reg_login;
mbox->context2 = ndlp;
@@ -1920,6 +1915,7 @@ lpfc_els_rsp_acc(struct lpfc_hba * phba, uint32_t flag,
uint8_t *pcmd;
uint16_t cmdsize;
int rc;
+ ELS_PKT *els_pkt_ptr;
psli = &phba->sli;
pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
@@ -1958,6 +1954,23 @@ lpfc_els_rsp_acc(struct lpfc_hba * phba, uint32_t flag,
pcmd += sizeof (uint32_t);
memcpy(pcmd, &phba->fc_sparam, sizeof (struct serv_parm));
break;
+ case ELS_CMD_PRLO:
+ cmdsize = sizeof (uint32_t) + sizeof (PRLO);
+ elsiocb = lpfc_prep_els_iocb(phba, 0, cmdsize, oldiocb->retry,
+ ndlp, ndlp->nlp_DID, ELS_CMD_PRLO);
+ if (!elsiocb)
+ return 1;
+
+ icmd = &elsiocb->iocb;
+ icmd->ulpContext = oldcmd->ulpContext; /* Xri */
+ pcmd = (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
+
+ memcpy(pcmd, ((struct lpfc_dmabuf *) oldiocb->context2)->virt,
+ sizeof (uint32_t) + sizeof (PRLO));
+ *((uint32_t *) (pcmd)) = ELS_CMD_PRLO_ACC;
+ els_pkt_ptr = (ELS_PKT *) pcmd;
+ els_pkt_ptr->un.prlo.acceptRspCode = PRLO_REQ_EXECUTED;
+ break;
default:
return 1;
}
@@ -2498,7 +2511,7 @@ lpfc_els_rcv_rscn(struct lpfc_hba * phba,
/* If we are about to begin discovery, just ACC the RSCN.
* Discovery processing will satisfy it.
*/
- if (phba->hba_state < LPFC_NS_QRY) {
+ if (phba->hba_state <= LPFC_NS_QRY) {
lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL,
newnode);
return 0;
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 6721e679df6..adb086009ae 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -311,8 +311,8 @@ lpfc_workq_post_event(struct lpfc_hba * phba, void *arg1, void *arg2,
evtp->evt_arg2 = arg2;
evtp->evt = evt;
- list_add_tail(&evtp->evt_listp, &phba->work_list);
spin_lock_irq(phba->host->host_lock);
+ list_add_tail(&evtp->evt_listp, &phba->work_list);
if (phba->work_wait)
wake_up(phba->work_wait);
spin_unlock_irq(phba->host->host_lock);
@@ -1071,10 +1071,6 @@ lpfc_register_remote_port(struct lpfc_hba * phba,
/* initialize static port data */
rport->maxframe_size = ndlp->nlp_maxframe;
rport->supported_classes = ndlp->nlp_class_sup;
- if ((rport->scsi_target_id != -1) &&
- (rport->scsi_target_id < MAX_FCP_TARGET)) {
- ndlp->nlp_sid = rport->scsi_target_id;
- }
rdata = rport->dd_data;
rdata->pnode = ndlp;
@@ -1087,6 +1083,10 @@ lpfc_register_remote_port(struct lpfc_hba * phba,
if (rport_ids.roles != FC_RPORT_ROLE_UNKNOWN)
fc_remote_port_rolechg(rport, rport_ids.roles);
+ if ((rport->scsi_target_id != -1) &&
+ (rport->scsi_target_id < MAX_FCP_TARGET)) {
+ ndlp->nlp_sid = rport->scsi_target_id;
+ }
return;
}
@@ -1238,6 +1238,7 @@ lpfc_nlp_list(struct lpfc_hba * phba, struct lpfc_nodelist * nlp, int list)
evt_listp);
}
+ nlp->nlp_flag &= ~NLP_NODEV_REMOVE;
nlp->nlp_type |= NLP_FC_NODE;
break;
case NLP_MAPPED_LIST:
@@ -1258,6 +1259,7 @@ lpfc_nlp_list(struct lpfc_hba * phba, struct lpfc_nodelist * nlp, int list)
evt_listp);
}
+ nlp->nlp_flag &= ~NLP_NODEV_REMOVE;
break;
case NLP_NPR_LIST:
nlp->nlp_flag |= list;
@@ -1402,6 +1404,8 @@ lpfc_check_sli_ndlp(struct lpfc_hba * phba,
if (icmd->ulpContext == (volatile ushort)ndlp->nlp_rpi)
return 1;
case CMD_ELS_REQUEST64_CR:
+ if (icmd->un.elsreq64.remoteID == ndlp->nlp_DID)
+ return 1;
case CMD_XMIT_ELS_RSP64_CX:
if (iocb->context1 == (uint8_t *) ndlp)
return 1;
@@ -1901,10 +1905,8 @@ lpfc_setup_disc_node(struct lpfc_hba * phba, uint32_t did)
*/
if (ndlp->nlp_flag & NLP_DELAY_TMO)
lpfc_cancel_retry_delay_tmo(phba, ndlp);
- } else {
- ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+ } else
ndlp = NULL;
- }
} else {
flg = ndlp->nlp_flag & NLP_LIST_MASK;
if ((flg == NLP_ADISC_LIST) || (flg == NLP_PLOGI_LIST))
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 54d04188f7c..eedf9880136 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -449,6 +449,7 @@ struct serv_parm { /* Structure is in Big Endian format */
#define ELS_CMD_RRQ 0x12000000
#define ELS_CMD_PRLI 0x20100014
#define ELS_CMD_PRLO 0x21100014
+#define ELS_CMD_PRLO_ACC 0x02100014
#define ELS_CMD_PDISC 0x50000000
#define ELS_CMD_FDISC 0x51000000
#define ELS_CMD_ADISC 0x52000000
@@ -484,6 +485,7 @@ struct serv_parm { /* Structure is in Big Endian format */
#define ELS_CMD_RRQ 0x12
#define ELS_CMD_PRLI 0x14001020
#define ELS_CMD_PRLO 0x14001021
+#define ELS_CMD_PRLO_ACC 0x14001002
#define ELS_CMD_PDISC 0x50
#define ELS_CMD_FDISC 0x51
#define ELS_CMD_ADISC 0x52
@@ -1539,6 +1541,7 @@ typedef struct {
#define FLAGS_TOPOLOGY_FAILOVER 0x0400 /* Bit 10 */
#define FLAGS_LINK_SPEED 0x0800 /* Bit 11 */
+#define FLAGS_IMED_ABORT 0x04000 /* Bit 14 */
uint32_t link_speed;
#define LINK_SPEED_AUTO 0 /* Auto selection */
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 66d5d003555..908d0f27706 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -294,15 +294,6 @@ lpfc_config_port_post(struct lpfc_hba * phba)
}
}
- /* This should turn on DELAYED ABTS for ELS timeouts */
- lpfc_set_slim(phba, pmb, 0x052198, 0x1);
- if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
- phba->hba_state = LPFC_HBA_ERROR;
- mempool_free( pmb, phba->mbox_mem_pool);
- return -EIO;
- }
-
-
lpfc_read_config(phba, pmb);
if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
lpfc_printf_log(phba,
@@ -804,7 +795,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp)
int max_speed;
char * ports;
char * bus;
- } m;
+ } m = {"<Unknown>", 0, "", ""};
pci_read_config_byte(phba->pcidev, PCI_HEADER_TYPE, &hdrtype);
ports = (hdrtype == 0x80) ? "2-port " : "";
@@ -1627,7 +1618,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
error = lpfc_alloc_sysfs_attr(phba);
if (error)
- goto out_kthread_stop;
+ goto out_remove_host;
error = request_irq(phba->pcidev->irq, lpfc_intr_handler, SA_SHIRQ,
LPFC_DRIVER_NAME, phba);
@@ -1644,8 +1635,10 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
error = lpfc_sli_hba_setup(phba);
- if (error)
+ if (error) {
+ error = -ENODEV;
goto out_free_irq;
+ }
if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
spin_lock_irq(phba->host->host_lock);
@@ -1700,6 +1693,9 @@ out_free_irq:
free_irq(phba->pcidev->irq, phba);
out_free_sysfs_attr:
lpfc_free_sysfs_attr(phba);
+out_remove_host:
+ fc_remove_host(phba->host);
+ scsi_remove_host(phba->host);
out_kthread_stop:
kthread_stop(phba->worker_thread);
out_free_iocbq:
@@ -1721,12 +1717,14 @@ out_iounmap_slim:
out_idr_remove:
idr_remove(&lpfc_hba_index, phba->brd_no);
out_put_host:
+ phba->host = NULL;
scsi_host_put(host);
out_release_regions:
pci_release_regions(pdev);
out_disable_device:
pci_disable_device(pdev);
out:
+ pci_set_drvdata(pdev, NULL);
return error;
}
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index c585e2b2e58..e42f22aaf71 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -200,6 +200,9 @@ lpfc_init_link(struct lpfc_hba * phba,
break;
}
+ /* Enable asynchronous ABTS responses from firmware */
+ mb->un.varInitLnk.link_flags |= FLAGS_IMED_ABORT;
+
/* NEW_FEATURE
* Setting up the link speed
*/
@@ -292,36 +295,6 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint32_t did, LPFC_MBOXQ_t * pmb)
return;
}
-/***********************************************/
-
-/* command to write slim */
-/***********************************************/
-void
-lpfc_set_slim(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint32_t addr,
- uint32_t value)
-{
- MAILBOX_t *mb;
-
- mb = &pmb->mb;
- memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
-
- /* addr = 0x090597 is AUTO ABTS disable for ELS commands */
- /* addr = 0x052198 is DELAYED ABTS enable for ELS commands */
-
- /*
- * Always turn on DELAYED ABTS for ELS timeouts
- */
- if ((addr == 0x052198) && (value == 0))
- value = 1;
-
- mb->un.varWords[0] = addr;
- mb->un.varWords[1] = value;
-
- mb->mbxCommand = MBX_SET_SLIM;
- mb->mbxOwner = OWN_HOST;
- return;
-}
-
/**********************************************/
/* lpfc_read_nv Issue a READ CONFIG */
/* mailbox command */
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 3d77bd999b7..27d60ad897c 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -465,14 +465,18 @@ lpfc_rcv_padisc(struct lpfc_hba * phba,
static int
lpfc_rcv_logo(struct lpfc_hba * phba,
struct lpfc_nodelist * ndlp,
- struct lpfc_iocbq *cmdiocb)
+ struct lpfc_iocbq *cmdiocb,
+ uint32_t els_cmd)
{
/* Put ndlp on NPR list with 1 sec timeout for plogi, ACC logo */
/* Only call LOGO ACC for first LOGO, this avoids sending unnecessary
* PLOGIs during LOGO storms from a device.
*/
ndlp->nlp_flag |= NLP_LOGO_ACC;
- lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL, 0);
+ if (els_cmd == ELS_CMD_PRLO)
+ lpfc_els_rsp_acc(phba, ELS_CMD_PRLO, cmdiocb, ndlp, NULL, 0);
+ else
+ lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL, 0);
if (!(ndlp->nlp_type & NLP_FABRIC) ||
(ndlp->nlp_state == NLP_STE_ADISC_ISSUE)) {
@@ -681,7 +685,7 @@ lpfc_rcv_logo_plogi_issue(struct lpfc_hba * phba,
/* software abort outstanding PLOGI */
lpfc_els_abort(phba, ndlp, 1);
- lpfc_rcv_logo(phba, ndlp, cmdiocb);
+ lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
return ndlp->nlp_state;
}
@@ -788,10 +792,6 @@ lpfc_cmpl_plogi_plogi_issue(struct lpfc_hba * phba,
if (lpfc_reg_login
(phba, irsp->un.elsreq64.remoteID,
(uint8_t *) sp, mbox, 0) == 0) {
- /* set_slim mailbox command needs to
- * execute first, queue this command to
- * be processed later.
- */
switch (ndlp->nlp_DID) {
case NameServer_DID:
mbox->mbox_cmpl =
@@ -832,11 +832,17 @@ static uint32_t
lpfc_device_rm_plogi_issue(struct lpfc_hba * phba,
struct lpfc_nodelist * ndlp, void *arg, uint32_t evt)
{
- /* software abort outstanding PLOGI */
- lpfc_els_abort(phba, ndlp, 1);
+ if(ndlp->nlp_flag & NLP_NPR_2B_DISC) {
+ ndlp->nlp_flag |= NLP_NODEV_REMOVE;
+ return ndlp->nlp_state;
+ }
+ else {
+ /* software abort outstanding PLOGI */
+ lpfc_els_abort(phba, ndlp, 1);
- lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
- return NLP_STE_FREED_NODE;
+ lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+ return NLP_STE_FREED_NODE;
+ }
}
static uint32_t
@@ -851,7 +857,7 @@ lpfc_device_recov_plogi_issue(struct lpfc_hba * phba,
ndlp->nlp_state = NLP_STE_NPR_NODE;
lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
spin_lock_irq(phba->host->host_lock);
- ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+ ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
spin_unlock_irq(phba->host->host_lock);
return ndlp->nlp_state;
@@ -905,7 +911,7 @@ lpfc_rcv_logo_adisc_issue(struct lpfc_hba * phba,
/* software abort outstanding ADISC */
lpfc_els_abort(phba, ndlp, 0);
- lpfc_rcv_logo(phba, ndlp, cmdiocb);
+ lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
return ndlp->nlp_state;
}
@@ -932,7 +938,7 @@ lpfc_rcv_prlo_adisc_issue(struct lpfc_hba * phba,
cmdiocb = (struct lpfc_iocbq *) arg;
/* Treat like rcv logo */
- lpfc_rcv_logo(phba, ndlp, cmdiocb);
+ lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_PRLO);
return ndlp->nlp_state;
}
@@ -987,11 +993,17 @@ lpfc_device_rm_adisc_issue(struct lpfc_hba * phba,
struct lpfc_nodelist * ndlp, void *arg,
uint32_t evt)
{
- /* software abort outstanding ADISC */
- lpfc_els_abort(phba, ndlp, 1);
+ if(ndlp->nlp_flag & NLP_NPR_2B_DISC) {
+ ndlp->nlp_flag |= NLP_NODEV_REMOVE;
+ return ndlp->nlp_state;
+ }
+ else {
+ /* software abort outstanding ADISC */
+ lpfc_els_abort(phba, ndlp, 1);
- lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
- return NLP_STE_FREED_NODE;
+ lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+ return NLP_STE_FREED_NODE;
+ }
}
static uint32_t
@@ -1006,7 +1018,7 @@ lpfc_device_recov_adisc_issue(struct lpfc_hba * phba,
ndlp->nlp_state = NLP_STE_NPR_NODE;
lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
spin_lock_irq(phba->host->host_lock);
- ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+ ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
ndlp->nlp_flag |= NLP_NPR_ADISC;
spin_unlock_irq(phba->host->host_lock);
@@ -1048,7 +1060,7 @@ lpfc_rcv_logo_reglogin_issue(struct lpfc_hba * phba,
cmdiocb = (struct lpfc_iocbq *) arg;
- lpfc_rcv_logo(phba, ndlp, cmdiocb);
+ lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
return ndlp->nlp_state;
}
@@ -1073,7 +1085,7 @@ lpfc_rcv_prlo_reglogin_issue(struct lpfc_hba * phba,
struct lpfc_iocbq *cmdiocb;
cmdiocb = (struct lpfc_iocbq *) arg;
- lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL, 0);
+ lpfc_els_rsp_acc(phba, ELS_CMD_PRLO, cmdiocb, ndlp, NULL, 0);
return ndlp->nlp_state;
}
@@ -1133,8 +1145,14 @@ lpfc_device_rm_reglogin_issue(struct lpfc_hba * phba,
struct lpfc_nodelist * ndlp, void *arg,
uint32_t evt)
{
- lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
- return NLP_STE_FREED_NODE;
+ if(ndlp->nlp_flag & NLP_NPR_2B_DISC) {
+ ndlp->nlp_flag |= NLP_NODEV_REMOVE;
+ return ndlp->nlp_state;
+ }
+ else {
+ lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+ return NLP_STE_FREED_NODE;
+ }
}
static uint32_t
@@ -1146,7 +1164,7 @@ lpfc_device_recov_reglogin_issue(struct lpfc_hba * phba,
ndlp->nlp_state = NLP_STE_NPR_NODE;
lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
spin_lock_irq(phba->host->host_lock);
- ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+ ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
spin_unlock_irq(phba->host->host_lock);
return ndlp->nlp_state;
}
@@ -1186,7 +1204,7 @@ lpfc_rcv_logo_prli_issue(struct lpfc_hba * phba,
/* Software abort outstanding PRLI before sending acc */
lpfc_els_abort(phba, ndlp, 1);
- lpfc_rcv_logo(phba, ndlp, cmdiocb);
+ lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
return ndlp->nlp_state;
}
@@ -1214,7 +1232,7 @@ lpfc_rcv_prlo_prli_issue(struct lpfc_hba * phba,
struct lpfc_iocbq *cmdiocb;
cmdiocb = (struct lpfc_iocbq *) arg;
- lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL, 0);
+ lpfc_els_rsp_acc(phba, ELS_CMD_PRLO, cmdiocb, ndlp, NULL, 0);
return ndlp->nlp_state;
}
@@ -1278,11 +1296,17 @@ static uint32_t
lpfc_device_rm_prli_issue(struct lpfc_hba * phba,
struct lpfc_nodelist * ndlp, void *arg, uint32_t evt)
{
- /* software abort outstanding PRLI */
- lpfc_els_abort(phba, ndlp, 1);
+ if(ndlp->nlp_flag & NLP_NPR_2B_DISC) {
+ ndlp->nlp_flag |= NLP_NODEV_REMOVE;
+ return ndlp->nlp_state;
+ }
+ else {
+ /* software abort outstanding PLOGI */
+ lpfc_els_abort(phba, ndlp, 1);
- lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
- return NLP_STE_FREED_NODE;
+ lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+ return NLP_STE_FREED_NODE;
+ }
}
@@ -1313,7 +1337,7 @@ lpfc_device_recov_prli_issue(struct lpfc_hba * phba,
ndlp->nlp_state = NLP_STE_NPR_NODE;
lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
spin_lock_irq(phba->host->host_lock);
- ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+ ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
spin_unlock_irq(phba->host->host_lock);
return ndlp->nlp_state;
}
@@ -1351,7 +1375,7 @@ lpfc_rcv_logo_unmap_node(struct lpfc_hba * phba,
cmdiocb = (struct lpfc_iocbq *) arg;
- lpfc_rcv_logo(phba, ndlp, cmdiocb);
+ lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
return ndlp->nlp_state;
}
@@ -1375,7 +1399,7 @@ lpfc_rcv_prlo_unmap_node(struct lpfc_hba * phba,
cmdiocb = (struct lpfc_iocbq *) arg;
- lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL, 0);
+ lpfc_els_rsp_acc(phba, ELS_CMD_PRLO, cmdiocb, ndlp, NULL, 0);
return ndlp->nlp_state;
}
@@ -1386,7 +1410,7 @@ lpfc_device_recov_unmap_node(struct lpfc_hba * phba,
ndlp->nlp_prev_state = NLP_STE_UNMAPPED_NODE;
ndlp->nlp_state = NLP_STE_NPR_NODE;
lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
- ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+ ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
lpfc_disc_set_adisc(phba, ndlp);
return ndlp->nlp_state;
@@ -1424,7 +1448,7 @@ lpfc_rcv_logo_mapped_node(struct lpfc_hba * phba,
cmdiocb = (struct lpfc_iocbq *) arg;
- lpfc_rcv_logo(phba, ndlp, cmdiocb);
+ lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
return ndlp->nlp_state;
}
@@ -1456,7 +1480,7 @@ lpfc_rcv_prlo_mapped_node(struct lpfc_hba * phba,
spin_unlock_irq(phba->host->host_lock);
/* Treat like rcv logo */
- lpfc_rcv_logo(phba, ndlp, cmdiocb);
+ lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_PRLO);
return ndlp->nlp_state;
}
@@ -1469,7 +1493,7 @@ lpfc_device_recov_mapped_node(struct lpfc_hba * phba,
ndlp->nlp_state = NLP_STE_NPR_NODE;
lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
spin_lock_irq(phba->host->host_lock);
- ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+ ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
spin_unlock_irq(phba->host->host_lock);
lpfc_disc_set_adisc(phba, ndlp);
return ndlp->nlp_state;
@@ -1551,7 +1575,7 @@ lpfc_rcv_logo_npr_node(struct lpfc_hba * phba,
cmdiocb = (struct lpfc_iocbq *) arg;
- lpfc_rcv_logo(phba, ndlp, cmdiocb);
+ lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
return ndlp->nlp_state;
}
@@ -1617,9 +1641,16 @@ lpfc_cmpl_plogi_npr_node(struct lpfc_hba * phba,
struct lpfc_nodelist * ndlp, void *arg, uint32_t evt)
{
struct lpfc_iocbq *cmdiocb, *rspiocb;
+ IOCB_t *irsp;
cmdiocb = (struct lpfc_iocbq *) arg;
rspiocb = cmdiocb->context_un.rsp_iocb;
+
+ irsp = &rspiocb->iocb;
+ if (irsp->ulpStatus) {
+ lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+ return NLP_STE_FREED_NODE;
+ }
return ndlp->nlp_state;
}
@@ -1628,9 +1659,16 @@ lpfc_cmpl_prli_npr_node(struct lpfc_hba * phba,
struct lpfc_nodelist * ndlp, void *arg, uint32_t evt)
{
struct lpfc_iocbq *cmdiocb, *rspiocb;
+ IOCB_t *irsp;
cmdiocb = (struct lpfc_iocbq *) arg;
rspiocb = cmdiocb->context_un.rsp_iocb;
+
+ irsp = &rspiocb->iocb;
+ if (irsp->ulpStatus && (ndlp->nlp_flag & NLP_NODEV_REMOVE)) {
+ lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+ return NLP_STE_FREED_NODE;
+ }
return ndlp->nlp_state;
}
@@ -1649,9 +1687,16 @@ lpfc_cmpl_adisc_npr_node(struct lpfc_hba * phba,
uint32_t evt)
{
struct lpfc_iocbq *cmdiocb, *rspiocb;
+ IOCB_t *irsp;
cmdiocb = (struct lpfc_iocbq *) arg;
rspiocb = cmdiocb->context_un.rsp_iocb;
+
+ irsp = &rspiocb->iocb;
+ if (irsp->ulpStatus && (ndlp->nlp_flag & NLP_NODEV_REMOVE)) {
+ lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+ return NLP_STE_FREED_NODE;
+ }
return ndlp->nlp_state;
}
@@ -1668,7 +1713,12 @@ lpfc_cmpl_reglogin_npr_node(struct lpfc_hba * phba,
if (!mb->mbxStatus)
ndlp->nlp_rpi = mb->un.varWords[0];
-
+ else {
+ if (ndlp->nlp_flag & NLP_NODEV_REMOVE) {
+ lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+ return NLP_STE_FREED_NODE;
+ }
+ }
return ndlp->nlp_state;
}
@@ -1677,6 +1727,10 @@ lpfc_device_rm_npr_node(struct lpfc_hba * phba,
struct lpfc_nodelist * ndlp, void *arg,
uint32_t evt)
{
+ if (ndlp->nlp_flag & NLP_NPR_2B_DISC) {
+ ndlp->nlp_flag |= NLP_NODEV_REMOVE;
+ return ndlp->nlp_state;
+ }
lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
return NLP_STE_FREED_NODE;
}
@@ -1687,7 +1741,7 @@ lpfc_device_recov_npr_node(struct lpfc_hba * phba,
uint32_t evt)
{
spin_lock_irq(phba->host->host_lock);
- ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+ ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
spin_unlock_irq(phba->host->host_lock);
if (ndlp->nlp_flag & NLP_DELAY_TMO) {
lpfc_cancel_retry_delay_tmo(phba, ndlp);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index f9379987372..7dc4c2e6bed 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -629,8 +629,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba,
struct lpfc_iocbq *piocbq;
IOCB_t *piocb;
struct fcp_cmnd *fcp_cmnd;
- struct scsi_device *scsi_dev = lpfc_cmd->pCmd->device;
- struct lpfc_rport_data *rdata = scsi_dev->hostdata;
+ struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
struct lpfc_nodelist *ndlp = rdata->pnode;
if ((ndlp == NULL) || (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) {
@@ -665,56 +664,18 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba,
piocb->ulpTimeout = lpfc_cmd->timeout;
}
- lpfc_cmd->rdata = rdata;
-
- switch (task_mgmt_cmd) {
- case FCP_LUN_RESET:
- /* Issue LUN Reset to TGT <num> LUN <num> */
- lpfc_printf_log(phba,
- KERN_INFO,
- LOG_FCP,
- "%d:0703 Issue LUN Reset to TGT %d LUN %d "
- "Data: x%x x%x\n",
- phba->brd_no,
- scsi_dev->id, scsi_dev->lun,
- ndlp->nlp_rpi, ndlp->nlp_flag);
-
- break;
- case FCP_ABORT_TASK_SET:
- /* Issue Abort Task Set to TGT <num> LUN <num> */
- lpfc_printf_log(phba,
- KERN_INFO,
- LOG_FCP,
- "%d:0701 Issue Abort Task Set to TGT %d LUN %d "
- "Data: x%x x%x\n",
- phba->brd_no,
- scsi_dev->id, scsi_dev->lun,
- ndlp->nlp_rpi, ndlp->nlp_flag);
-
- break;
- case FCP_TARGET_RESET:
- /* Issue Target Reset to TGT <num> */
- lpfc_printf_log(phba,
- KERN_INFO,
- LOG_FCP,
- "%d:0702 Issue Target Reset to TGT %d "
- "Data: x%x x%x\n",
- phba->brd_no,
- scsi_dev->id, ndlp->nlp_rpi,
- ndlp->nlp_flag);
- break;
- }
-
return (1);
}
static int
-lpfc_scsi_tgt_reset(struct lpfc_scsi_buf * lpfc_cmd, struct lpfc_hba * phba)
+lpfc_scsi_tgt_reset(struct lpfc_scsi_buf * lpfc_cmd, struct lpfc_hba * phba,
+ unsigned tgt_id, struct lpfc_rport_data *rdata)
{
struct lpfc_iocbq *iocbq;
struct lpfc_iocbq *iocbqrsp;
int ret;
+ lpfc_cmd->rdata = rdata;
ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_TARGET_RESET);
if (!ret)
return FAILED;
@@ -726,6 +687,13 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf * lpfc_cmd, struct lpfc_hba * phba)
if (!iocbqrsp)
return FAILED;
+ /* Issue Target Reset to TGT <num> */
+ lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
+ "%d:0702 Issue Target Reset to TGT %d "
+ "Data: x%x x%x\n",
+ phba->brd_no, tgt_id, rdata->pnode->nlp_rpi,
+ rdata->pnode->nlp_flag);
+
ret = lpfc_sli_issue_iocb_wait(phba,
&phba->sli.ring[phba->sli.fcp_ring],
iocbq, iocbqrsp, lpfc_cmd->timeout);
@@ -1021,6 +989,7 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
lpfc_cmd->pCmd = cmnd;
lpfc_cmd->timeout = 60;
lpfc_cmd->scsi_hba = phba;
+ lpfc_cmd->rdata = rdata;
ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_LUN_RESET);
if (!ret)
@@ -1033,6 +1002,11 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
if (iocbqrsp == NULL)
goto out_free_scsi_buf;
+ lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
+ "%d:0703 Issue LUN Reset to TGT %d LUN %d "
+ "Data: x%x x%x\n", phba->brd_no, cmnd->device->id,
+ cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
+
ret = lpfc_sli_issue_iocb_wait(phba,
&phba->sli.ring[phba->sli.fcp_ring],
iocbq, iocbqrsp, lpfc_cmd->timeout);
@@ -1104,7 +1078,6 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
int match;
int ret = FAILED, i, err_count = 0;
int cnt, loopcnt;
- unsigned int midlayer_id = 0;
struct lpfc_scsi_buf * lpfc_cmd;
lpfc_block_requests(phba);
@@ -1124,7 +1097,6 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
* targets known to the driver. Should any target reset
* fail, this routine returns failure to the midlayer.
*/
- midlayer_id = cmnd->device->id;
for (i = 0; i < MAX_FCP_TARGET; i++) {
/* Search the mapped list for this target ID */
match = 0;
@@ -1137,9 +1109,8 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
if (!match)
continue;
- lpfc_cmd->pCmd->device->id = i;
- lpfc_cmd->pCmd->device->hostdata = ndlp->rport->dd_data;
- ret = lpfc_scsi_tgt_reset(lpfc_cmd, phba);
+ ret = lpfc_scsi_tgt_reset(lpfc_cmd, phba,
+ i, ndlp->rport->dd_data);
if (ret != SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
"%d:0713 Bus Reset on target %d failed\n",
@@ -1158,7 +1129,6 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
* the targets. Unfortunately, some targets do not abide by
* this forcing the driver to double check.
*/
- cmnd->device->id = midlayer_id;
cnt = lpfc_sli_sum_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring],
0, 0, LPFC_CTX_HOST);
if (cnt)
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 4cf1366108b..6b737568b83 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.1.4"
+#define LPFC_DRIVER_VERSION "8.1.6"
#define LPFC_DRIVER_NAME "lpfc"
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 80b68a2481b..de35ffe2f79 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -4471,7 +4471,6 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru)
{
Scsi_Cmnd *scmd;
struct scsi_device *sdev;
- unsigned long flags = 0;
scb_t *scb;
int rval;
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index c11e5ce6865..bec1424eda8 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -10,7 +10,7 @@
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_mbox.c
- * Version : v2.20.4.7 (Nov 14 2005)
+ * Version : v2.20.4.8 (Apr 11 2006)
*
* Authors:
* Atul Mukker <Atul.Mukker@lsil.com>
@@ -2278,6 +2278,7 @@ megaraid_mbox_dpc(unsigned long devp)
unsigned long flags;
uint8_t c;
int status;
+ uioc_t *kioc;
if (!adapter) return;
@@ -2320,6 +2321,9 @@ megaraid_mbox_dpc(unsigned long devp)
// remove from local clist
list_del_init(&scb->list);
+ kioc = (uioc_t *)scb->gp;
+ kioc->status = 0;
+
megaraid_mbox_mm_done(adapter, scb);
continue;
@@ -2636,6 +2640,7 @@ megaraid_reset_handler(struct scsi_cmnd *scp)
int recovery_window;
int recovering;
int i;
+ uioc_t *kioc;
adapter = SCP2ADAPTER(scp);
raid_dev = ADAP2RAIDDEV(adapter);
@@ -2655,32 +2660,51 @@ megaraid_reset_handler(struct scsi_cmnd *scp)
// Also, reset all the commands currently owned by the driver
spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
list_for_each_entry_safe(scb, tmp, &adapter->pend_list, list) {
-
list_del_init(&scb->list); // from pending list
- con_log(CL_ANN, (KERN_WARNING
- "megaraid: %ld:%d[%d:%d], reset from pending list\n",
- scp->serial_number, scb->sno,
- scb->dev_channel, scb->dev_target));
+ if (scb->sno >= MBOX_MAX_SCSI_CMDS) {
+ con_log(CL_ANN, (KERN_WARNING
+ "megaraid: IOCTL packet with %d[%d:%d] being reset\n",
+ scb->sno, scb->dev_channel, scb->dev_target));
- scp->result = (DID_RESET << 16);
- scp->scsi_done(scp);
+ scb->status = -1;
- megaraid_dealloc_scb(adapter, scb);
+ kioc = (uioc_t *)scb->gp;
+ kioc->status = -EFAULT;
+
+ megaraid_mbox_mm_done(adapter, scb);
+ } else {
+ if (scb->scp == scp) { // Found command
+ con_log(CL_ANN, (KERN_WARNING
+ "megaraid: %ld:%d[%d:%d], reset from pending list\n",
+ scp->serial_number, scb->sno,
+ scb->dev_channel, scb->dev_target));
+ } else {
+ con_log(CL_ANN, (KERN_WARNING
+ "megaraid: IO packet with %d[%d:%d] being reset\n",
+ scb->sno, scb->dev_channel, scb->dev_target));
+ }
+
+ scb->scp->result = (DID_RESET << 16);
+ scb->scp->scsi_done(scb->scp);
+
+ megaraid_dealloc_scb(adapter, scb);
+ }
}
spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
if (adapter->outstanding_cmds) {
con_log(CL_ANN, (KERN_NOTICE
"megaraid: %d outstanding commands. Max wait %d sec\n",
- adapter->outstanding_cmds, MBOX_RESET_WAIT));
+ adapter->outstanding_cmds,
+ (MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT)));
}
recovery_window = MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT;
recovering = adapter->outstanding_cmds;
- for (i = 0; i < recovery_window && adapter->outstanding_cmds; i++) {
+ for (i = 0; i < recovery_window; i++) {
megaraid_ack_sequence(adapter);
@@ -2689,12 +2713,11 @@ megaraid_reset_handler(struct scsi_cmnd *scp)
con_log(CL_ANN, (
"megaraid mbox: Wait for %d commands to complete:%d\n",
adapter->outstanding_cmds,
- MBOX_RESET_WAIT - i));
+ (MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT) - i));
}
// bailout if no recovery happended in reset time
- if ((i == MBOX_RESET_WAIT) &&
- (recovering == adapter->outstanding_cmds)) {
+ if (adapter->outstanding_cmds == 0) {
break;
}
@@ -2918,12 +2941,13 @@ mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[])
wmb();
WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
- for (i = 0; i < 0xFFFFF; i++) {
+ for (i = 0; i < MBOX_SYNC_WAIT_CNT; i++) {
if (mbox->numstatus != 0xFF) break;
rmb();
+ udelay(MBOX_SYNC_DELAY_200);
}
- if (i == 0xFFFFF) {
+ if (i == MBOX_SYNC_WAIT_CNT) {
// We may need to re-calibrate the counter
con_log(CL_ANN, (KERN_CRIT
"megaraid: fast sync command timed out\n"));
@@ -3475,7 +3499,7 @@ megaraid_cmm_register(adapter_t *adapter)
adp.drvr_data = (unsigned long)adapter;
adp.pdev = adapter->pdev;
adp.issue_uioc = megaraid_mbox_mm_handler;
- adp.timeout = 300;
+ adp.timeout = MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT;
adp.max_kioc = MBOX_MAX_USER_CMDS;
if ((rval = mraid_mm_register_adp(&adp)) != 0) {
@@ -3702,7 +3726,6 @@ megaraid_mbox_mm_done(adapter_t *adapter, scb_t *scb)
unsigned long flags;
kioc = (uioc_t *)scb->gp;
- kioc->status = 0;
mbox64 = (mbox64_t *)(unsigned long)kioc->cmdbuf;
mbox64->mbox32.status = scb->status;
raw_mbox = (uint8_t *)&mbox64->mbox32;
diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h
index 882fb1a0b57..868fb0ec93e 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.h
+++ b/drivers/scsi/megaraid/megaraid_mbox.h
@@ -21,8 +21,8 @@
#include "megaraid_ioctl.h"
-#define MEGARAID_VERSION "2.20.4.7"
-#define MEGARAID_EXT_VERSION "(Release Date: Mon Nov 14 12:27:22 EST 2005)"
+#define MEGARAID_VERSION "2.20.4.8"
+#define MEGARAID_EXT_VERSION "(Release Date: Mon Apr 11 12:27:22 EST 2006)"
/*
@@ -100,6 +100,9 @@
#define MBOX_BUSY_WAIT 10 // max usec to wait for busy mailbox
#define MBOX_RESET_WAIT 180 // wait these many seconds in reset
#define MBOX_RESET_EXT_WAIT 120 // extended wait reset
+#define MBOX_SYNC_WAIT_CNT 0xFFFF // wait loop index for synchronous mode
+
+#define MBOX_SYNC_DELAY_200 200 // 200 micro-seconds
/*
* maximum transfer that can happen through the firmware commands issued
diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c
index 8f3ce043229..e8f534fb336 100644
--- a/drivers/scsi/megaraid/megaraid_mm.c
+++ b/drivers/scsi/megaraid/megaraid_mm.c
@@ -898,10 +898,8 @@ mraid_mm_register_adp(mraid_mmadp_t *lld_adp)
adapter = kmalloc(sizeof(mraid_mmadp_t), GFP_KERNEL);
- if (!adapter) {
- rval = -ENOMEM;
- goto memalloc_error;
- }
+ if (!adapter)
+ return -ENOMEM;
memset(adapter, 0, sizeof(mraid_mmadp_t));
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 017729c59a4..584fe5d8e50 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -599,6 +599,7 @@ qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha)
* Either SUCCESS or FAILED.
*
* Note:
+* Only return FAILED if command not returned by firmware.
**************************************************************************/
int
qla2xxx_eh_abort(struct scsi_cmnd *cmd)
@@ -609,11 +610,12 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
unsigned int id, lun;
unsigned long serial;
unsigned long flags;
+ int wait = 0;
if (!CMD_SP(cmd))
- return FAILED;
+ return SUCCESS;
- ret = FAILED;
+ ret = SUCCESS;
id = cmd->device->id;
lun = cmd->device->lun;
@@ -642,7 +644,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
} else {
DEBUG3(printk("%s(%ld): abort_command "
"mbx success.\n", __func__, ha->host_no));
- ret = SUCCESS;
+ wait = 1;
}
spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -651,17 +653,18 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Wait for the command to be returned. */
- if (ret == SUCCESS) {
+ if (wait) {
if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
qla_printk(KERN_ERR, ha,
"scsi(%ld:%d:%d): Abort handler timed out -- %lx "
"%x.\n", ha->host_no, id, lun, serial, ret);
+ ret = FAILED;
}
}
qla_printk(KERN_INFO, ha,
- "scsi(%ld:%d:%d): Abort command issued -- %lx %x.\n", ha->host_no,
- id, lun, serial, ret);
+ "scsi(%ld:%d:%d): Abort command issued -- %d %lx %x.\n",
+ ha->host_no, id, lun, wait, serial, ret);
return ret;
}
@@ -1700,8 +1703,8 @@ qla2x00_free_device(scsi_qla_host_t *ha)
ha->flags.online = 0;
/* Detach interrupts */
- if (ha->pdev->irq)
- free_irq(ha->pdev->irq, ha);
+ if (ha->host->irq)
+ free_irq(ha->host->irq, ha);
/* release io space registers */
if (ha->iobase)
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index c750d3399a9..941c1e15c89 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -56,6 +56,8 @@ static struct {
{"DENON", "DRD-25X", "V", BLIST_NOLUN}, /* locks up */
{"HITACHI", "DK312C", "CM81", BLIST_NOLUN}, /* responds to all lun */
{"HITACHI", "DK314C", "CR21", BLIST_NOLUN}, /* responds to all lun */
+ {"IBM", "2104-DU3", NULL, BLIST_NOLUN}, /* locks up */
+ {"IBM", "2104-TU3", NULL, BLIST_NOLUN}, /* locks up */
{"IMS", "CDD521/10", "2.06", BLIST_NOLUN}, /* locks up */
{"MAXTOR", "XT-3280", "PR02", BLIST_NOLUN}, /* locks up */
{"MAXTOR", "XT-4380S", "B3C", BLIST_NOLUN}, /* locks up */
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 7b0f9a3810d..764a8b375ea 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1067,16 +1067,29 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
break;
case NOT_READY:
/*
- * If the device is in the process of becoming ready,
- * retry.
+ * If the device is in the process of becoming
+ * ready, or has a temporary blockage, retry.
*/
- if (sshdr.asc == 0x04 && sshdr.ascq == 0x01) {
- scsi_requeue_command(q, cmd);
- return;
+ if (sshdr.asc == 0x04) {
+ switch (sshdr.ascq) {
+ case 0x01: /* becoming ready */
+ case 0x04: /* format in progress */
+ case 0x05: /* rebuild in progress */
+ case 0x06: /* recalculation in progress */
+ case 0x07: /* operation in progress */
+ case 0x08: /* Long write in progress */
+ case 0x09: /* self test in progress */
+ scsi_requeue_command(q, cmd);
+ return;
+ default:
+ break;
+ }
}
- if (!(req->flags & REQ_QUIET))
+ if (!(req->flags & REQ_QUIET)) {
scmd_printk(KERN_INFO, cmd,
- "Device not ready.\n");
+ "Device not ready: ");
+ scsi_print_sense_hdr("", &sshdr);
+ }
scsi_end_request(cmd, 0, this_count, 1);
return;
case VOLUME_OVERFLOW:
diff --git a/drivers/scsi/sim710.c b/drivers/scsi/sim710.c
index 3274ab76c8d..255886a9ac5 100644
--- a/drivers/scsi/sim710.c
+++ b/drivers/scsi/sim710.c
@@ -75,7 +75,7 @@ param_setup(char *str)
else if(!strncmp(pos, "id:", 3)) {
if(slot == -1) {
printk(KERN_WARNING "sim710: Must specify slot for id parameter\n");
- } else if(slot > MAX_SLOTS) {
+ } else if(slot >= MAX_SLOTS) {
printk(KERN_WARNING "sim710: Illegal slot %d for id %d\n", slot, val);
} else {
id_array[slot] = val;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 674b15c78f6..bbf78aaf9e0 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -362,6 +362,40 @@ serial_out(struct uart_8250_port *up, int offset, int value)
#define serial_inp(up, offset) serial_in(up, offset)
#define serial_outp(up, offset, value) serial_out(up, offset, value)
+/* Uart divisor latch read */
+static inline int _serial_dl_read(struct uart_8250_port *up)
+{
+ return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8;
+}
+
+/* Uart divisor latch write */
+static inline void _serial_dl_write(struct uart_8250_port *up, int value)
+{
+ serial_outp(up, UART_DLL, value & 0xff);
+ serial_outp(up, UART_DLM, value >> 8 & 0xff);
+}
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+/* Au1x00 haven't got a standard divisor latch */
+static int serial_dl_read(struct uart_8250_port *up)
+{
+ if (up->port.iotype == UPIO_AU)
+ return __raw_readl(up->port.membase + 0x28);
+ else
+ return _serial_dl_read(up);
+}
+
+static void serial_dl_write(struct uart_8250_port *up, int value)
+{
+ if (up->port.iotype == UPIO_AU)
+ __raw_writel(value, up->port.membase + 0x28);
+ else
+ _serial_dl_write(up, value);
+}
+#else
+#define serial_dl_read(up) _serial_dl_read(up)
+#define serial_dl_write(up, value) _serial_dl_write(up, value)
+#endif
/*
* For the 16C950
@@ -494,7 +528,8 @@ static void disable_rsa(struct uart_8250_port *up)
*/
static int size_fifo(struct uart_8250_port *up)
{
- unsigned char old_fcr, old_mcr, old_dll, old_dlm, old_lcr;
+ unsigned char old_fcr, old_mcr, old_lcr;
+ unsigned short old_dl;
int count;
old_lcr = serial_inp(up, UART_LCR);
@@ -505,10 +540,8 @@ static int size_fifo(struct uart_8250_port *up)
UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
serial_outp(up, UART_MCR, UART_MCR_LOOP);
serial_outp(up, UART_LCR, UART_LCR_DLAB);
- old_dll = serial_inp(up, UART_DLL);
- old_dlm = serial_inp(up, UART_DLM);
- serial_outp(up, UART_DLL, 0x01);
- serial_outp(up, UART_DLM, 0x00);
+ old_dl = serial_dl_read(up);
+ serial_dl_write(up, 0x0001);
serial_outp(up, UART_LCR, 0x03);
for (count = 0; count < 256; count++)
serial_outp(up, UART_TX, count);
@@ -519,8 +552,7 @@ static int size_fifo(struct uart_8250_port *up)
serial_outp(up, UART_FCR, old_fcr);
serial_outp(up, UART_MCR, old_mcr);
serial_outp(up, UART_LCR, UART_LCR_DLAB);
- serial_outp(up, UART_DLL, old_dll);
- serial_outp(up, UART_DLM, old_dlm);
+ serial_dl_write(up, old_dl);
serial_outp(up, UART_LCR, old_lcr);
return count;
@@ -750,8 +782,7 @@ static void autoconfig_16550a(struct uart_8250_port *up)
serial_outp(up, UART_LCR, 0xE0);
- quot = serial_inp(up, UART_DLM) << 8;
- quot += serial_inp(up, UART_DLL);
+ quot = serial_dl_read(up);
quot <<= 3;
status1 = serial_in(up, 0x04); /* EXCR1 */
@@ -759,8 +790,7 @@ static void autoconfig_16550a(struct uart_8250_port *up)
status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
serial_outp(up, 0x04, status1);
- serial_outp(up, UART_DLL, quot & 0xff);
- serial_outp(up, UART_DLM, quot >> 8);
+ serial_dl_write(up, quot);
serial_outp(up, UART_LCR, 0);
@@ -1862,8 +1892,7 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios,
serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
}
- serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */
- serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */
+ serial_dl_write(up, quot);
/*
* LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
@@ -1906,6 +1935,9 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
int ret = 0;
switch (up->port.iotype) {
+ case UPIO_AU:
+ size = 0x100000;
+ /* fall thru */
case UPIO_MEM:
if (!up->port.mapbase)
break;
@@ -1938,6 +1970,9 @@ static void serial8250_release_std_resource(struct uart_8250_port *up)
unsigned int size = 8 << up->port.regshift;
switch (up->port.iotype) {
+ case UPIO_AU:
+ size = 0x100000;
+ /* fall thru */
case UPIO_MEM:
if (!up->port.mapbase)
break;
@@ -2200,10 +2235,17 @@ static void
serial8250_console_write(struct console *co, const char *s, unsigned int count)
{
struct uart_8250_port *up = &serial8250_ports[co->index];
+ unsigned long flags;
unsigned int ier;
+ int locked = 1;
touch_nmi_watchdog();
+ if (oops_in_progress) {
+ locked = spin_trylock_irqsave(&up->port.lock, flags);
+ } else
+ spin_lock_irqsave(&up->port.lock, flags);
+
/*
* First save the IER then disable the interrupts
*/
@@ -2221,8 +2263,10 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
* and restore the IER
*/
wait_for_xmitr(up, BOTH_EMPTY);
- up->ier |= UART_IER_THRI;
- serial_out(up, UART_IER, ier | UART_IER_THRI);
+ serial_out(up, UART_IER, ier);
+
+ if (locked)
+ spin_unlock_irqrestore(&up->port.lock, flags);
}
static int serial8250_console_setup(struct console *co, char *options)
diff --git a/drivers/serial/8250_au1x00.c b/drivers/serial/8250_au1x00.c
index 3d1bfd07208..58015fd14be 100644
--- a/drivers/serial/8250_au1x00.c
+++ b/drivers/serial/8250_au1x00.c
@@ -30,13 +30,12 @@
{ \
.iobase = _base, \
.membase = (void __iomem *)_base,\
- .mapbase = _base, \
+ .mapbase = CPHYSADDR(_base), \
.irq = _irq, \
.uartclk = 0, /* filled */ \
.regshift = 2, \
.iotype = UPIO_AU, \
- .flags = UPF_SKIP_TEST | \
- UPF_IOREMAP, \
+ .flags = UPF_SKIP_TEST \
}
static struct plat_serial8250_port au1x00_data[] = {
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index aa5eb7ddeda..3b35cb77953 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -5,6 +5,13 @@
*
* Copyright (C) 2004 Freescale Semiconductor, Inc.
*
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
*/
#ifndef CPM_UART_H
#define CPM_UART_H
@@ -101,12 +108,13 @@ static inline unsigned long cpu2cpm_addr(void* addr, struct uart_cpm_port *pinfo
int offset;
u32 val = (u32)addr;
/* sane check */
- if ((val >= (u32)pinfo->mem_addr) &&
+ if (likely((val >= (u32)pinfo->mem_addr)) &&
(val<((u32)pinfo->mem_addr + pinfo->mem_size))) {
offset = val - (u32)pinfo->mem_addr;
return pinfo->dma_addr+offset;
}
- printk("%s(): address %x to translate out of range!\n", __FUNCTION__, val);
+ /* something nasty happened */
+ BUG();
return 0;
}
@@ -115,12 +123,13 @@ static inline void *cpm2cpu_addr(unsigned long addr, struct uart_cpm_port *pinfo
int offset;
u32 val = addr;
/* sane check */
- if ((val >= pinfo->dma_addr) &&
- (val<(pinfo->dma_addr + pinfo->mem_size))) {
+ if (likely((val >= pinfo->dma_addr) &&
+ (val<(pinfo->dma_addr + pinfo->mem_size)))) {
offset = val - (u32)pinfo->dma_addr;
return (void*)(pinfo->mem_addr+offset);
}
- printk("%s(): address %x to translate out of range!\n", __FUNCTION__, val);
+ /* something nasty happened */
+ BUG();
return 0;
}
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index ced193bf9e1..969f9490043 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -12,7 +12,8 @@
*
* Copyright (C) 2004 Freescale Semiconductor, Inc.
* (C) 2004 Intracom, S.A.
- * (C) 2005 MontaVista Software, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
+ * (C) 2005-2006 MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -81,7 +82,7 @@ early_uart_get_pdev(int index)
}
-void cpm_uart_count(void)
+static void cpm_uart_count(void)
{
cpm_uart_nr = 0;
#ifdef CONFIG_SERIAL_CPM_SMC1
@@ -104,6 +105,21 @@ void cpm_uart_count(void)
#endif
}
+/* Get UART number by its id */
+static int cpm_uart_id2nr(int id)
+{
+ int i;
+ if (id < UART_NR) {
+ for (i=0; i<UART_NR; i++) {
+ if (cpm_uart_port_map[i] == id)
+ return i;
+ }
+ }
+
+ /* not found or invalid argument */
+ return -1;
+}
+
/*
* Check, if transmit buffers are processed
*/
@@ -457,7 +473,11 @@ static void cpm_uart_shutdown(struct uart_port *port)
}
/* Shut them really down and reinit buffer descriptors */
- cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+ if (IS_SMC(pinfo))
+ cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+ else
+ cpm_line_cr_cmd(line, CPM_CR_GRA_STOP_TX);
+
cpm_uart_initbd(pinfo);
}
}
@@ -1008,7 +1028,11 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
int line;
u32 mem, pram;
- for (line=0; line<UART_NR && cpm_uart_port_map[line]!=pdata->fs_no; line++);
+ line = cpm_uart_id2nr(idx);
+ if(line < 0) {
+ printk(KERN_ERR"%s(): port %d is not registered", __FUNCTION__, idx);
+ return -1;
+ }
pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx];
@@ -1241,8 +1265,7 @@ static int cpm_uart_drv_probe(struct device *dev)
}
pdata = pdev->dev.platform_data;
- pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n",
- cpm_uart_port_map[pdata->fs_no]);
+ pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no));
if ((ret = cpm_uart_drv_get_platform_data(pdev, 0)))
return ret;
@@ -1261,7 +1284,7 @@ static int cpm_uart_drv_remove(struct device *dev)
struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
pr_debug("cpm_uart_drv_remove: Removing CPM UART %d\n",
- cpm_uart_port_map[pdata->fs_no]);
+ cpm_uart_id2nr(pdata->fs_no));
uart_remove_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
return 0;
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index a5a30622637..17406a05ce1 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -8,6 +8,8 @@
*
* Copyright (C) 2004 Freescale Semiconductor, Inc.
* (C) 2004 Intracom, S.A.
+ * (C) 2006 MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index 7c6b07aeea9..4b2de08f46d 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -8,6 +8,8 @@
*
* Copyright (C) 2004 Freescale Semiconductor, Inc.
* (C) 2004 Intracom, S.A.
+ * (C) 2006 MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index c3b7a6673e9..d202eb4f384 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -45,6 +45,7 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware.h>
+#include <asm/arch/imx-uart.h>
/* We've been assigned a range on the "Low-density serial ports" major */
#define SERIAL_IMX_MAJOR 204
@@ -73,7 +74,8 @@ struct imx_port {
struct uart_port port;
struct timer_list timer;
unsigned int old_status;
- int txirq,rxirq,rtsirq;
+ int txirq,rxirq,rtsirq;
+ int have_rtscts:1;
};
/*
@@ -491,8 +493,12 @@ imx_set_termios(struct uart_port *port, struct termios *termios,
ucr2 = UCR2_SRST | UCR2_IRTS;
if (termios->c_cflag & CRTSCTS) {
- ucr2 &= ~UCR2_IRTS;
- ucr2 |= UCR2_CTSC;
+ if( sport->have_rtscts ) {
+ ucr2 &= ~UCR2_IRTS;
+ ucr2 |= UCR2_CTSC;
+ } else {
+ termios->c_cflag &= ~CRTSCTS;
+ }
}
if (termios->c_cflag & CSTOPB)
@@ -719,27 +725,6 @@ static void __init imx_init_ports(void)
imx_ports[i].timer.function = imx_timeout;
imx_ports[i].timer.data = (unsigned long)&imx_ports[i];
}
-
- imx_gpio_mode(PC9_PF_UART1_CTS);
- imx_gpio_mode(PC10_PF_UART1_RTS);
- imx_gpio_mode(PC11_PF_UART1_TXD);
- imx_gpio_mode(PC12_PF_UART1_RXD);
- imx_gpio_mode(PB28_PF_UART2_CTS);
- imx_gpio_mode(PB29_PF_UART2_RTS);
-
- imx_gpio_mode(PB30_PF_UART2_TXD);
- imx_gpio_mode(PB31_PF_UART2_RXD);
-
-#if 0 /* We don't need these, on the mx1 the _modem_ side of the uart
- * is implemented.
- */
- imx_gpio_mode(PD7_AF_UART2_DTR);
- imx_gpio_mode(PD8_AF_UART2_DCD);
- imx_gpio_mode(PD9_AF_UART2_RI);
- imx_gpio_mode(PD10_AF_UART2_DSR);
-#endif
-
-
}
#ifdef CONFIG_SERIAL_IMX_CONSOLE
@@ -932,7 +917,14 @@ static int serial_imx_resume(struct platform_device *dev)
static int serial_imx_probe(struct platform_device *dev)
{
+ struct imxuart_platform_data *pdata;
+
imx_ports[dev->id].port.dev = &dev->dev;
+
+ pdata = (struct imxuart_platform_data *)dev->dev.platform_data;
+ if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
+ imx_ports[dev->id].have_rtscts = 1;
+
uart_add_one_port(&imx_reg, &imx_ports[dev->id].port);
platform_set_drvdata(dev, &imx_ports[dev->id]);
return 0;
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index fcd7744c425..17839e753e4 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1500,20 +1500,18 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
static struct uart_state *uart_get(struct uart_driver *drv, int line)
{
struct uart_state *state;
+ int ret = 0;
- mutex_lock(&port_mutex);
state = drv->state + line;
if (mutex_lock_interruptible(&state->mutex)) {
- state = ERR_PTR(-ERESTARTSYS);
- goto out;
+ ret = -ERESTARTSYS;
+ goto err;
}
state->count++;
- if (!state->port) {
- state->count--;
- mutex_unlock(&state->mutex);
- state = ERR_PTR(-ENXIO);
- goto out;
+ if (!state->port || state->port->flags & UPF_DEAD) {
+ ret = -ENXIO;
+ goto err_unlock;
}
if (!state->info) {
@@ -1531,15 +1529,17 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
tasklet_init(&state->info->tlet, uart_tasklet_action,
(unsigned long)state);
} else {
- state->count--;
- mutex_unlock(&state->mutex);
- state = ERR_PTR(-ENOMEM);
+ ret = -ENOMEM;
+ goto err_unlock;
}
}
-
- out:
- mutex_unlock(&port_mutex);
return state;
+
+ err_unlock:
+ state->count--;
+ mutex_unlock(&state->mutex);
+ err:
+ return ERR_PTR(ret);
}
/*
@@ -1907,9 +1907,12 @@ uart_set_options(struct uart_port *port, struct console *co,
static void uart_change_pm(struct uart_state *state, int pm_state)
{
struct uart_port *port = state->port;
- if (port->ops->pm)
- port->ops->pm(port, pm_state, state->pm_state);
- state->pm_state = pm_state;
+
+ if (state->pm_state != pm_state) {
+ if (port->ops->pm)
+ port->ops->pm(port, pm_state, state->pm_state);
+ state->pm_state = pm_state;
+ }
}
int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
@@ -2085,45 +2088,6 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
}
}
-/*
- * This reverses the effects of uart_configure_port, hanging up the
- * port before removal.
- */
-static void
-uart_unconfigure_port(struct uart_driver *drv, struct uart_state *state)
-{
- struct uart_port *port = state->port;
- struct uart_info *info = state->info;
-
- if (info && info->tty)
- tty_vhangup(info->tty);
-
- mutex_lock(&state->mutex);
-
- state->info = NULL;
-
- /*
- * Free the port IO and memory resources, if any.
- */
- if (port->type != PORT_UNKNOWN)
- port->ops->release_port(port);
-
- /*
- * Indicate that there isn't a port here anymore.
- */
- port->type = PORT_UNKNOWN;
-
- /*
- * Kill the tasklet, and free resources.
- */
- if (info) {
- tasklet_kill(&info->tlet);
- kfree(info);
- }
-
- mutex_unlock(&state->mutex);
-}
-
static struct tty_operations uart_ops = {
.open = uart_open,
.close = uart_close,
@@ -2270,6 +2234,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
state = drv->state + port->line;
mutex_lock(&port_mutex);
+ mutex_lock(&state->mutex);
if (state->port) {
ret = -EINVAL;
goto out;
@@ -2304,7 +2269,13 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
port->cons && !(port->cons->flags & CON_ENABLED))
register_console(port->cons);
+ /*
+ * Ensure UPF_DEAD is not set.
+ */
+ port->flags &= ~UPF_DEAD;
+
out:
+ mutex_unlock(&state->mutex);
mutex_unlock(&port_mutex);
return ret;
@@ -2322,6 +2293,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
{
struct uart_state *state = drv->state + port->line;
+ struct uart_info *info;
BUG_ON(in_interrupt());
@@ -2332,11 +2304,48 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
mutex_lock(&port_mutex);
/*
+ * Mark the port "dead" - this prevents any opens from
+ * succeeding while we shut down the port.
+ */
+ mutex_lock(&state->mutex);
+ port->flags |= UPF_DEAD;
+ mutex_unlock(&state->mutex);
+
+ /*
* Remove the devices from devfs
*/
tty_unregister_device(drv->tty_driver, port->line);
- uart_unconfigure_port(drv, state);
+ info = state->info;
+ if (info && info->tty)
+ tty_vhangup(info->tty);
+
+ /*
+ * All users of this port should now be disconnected from
+ * this driver, and the port shut down. We should be the
+ * only thread fiddling with this port from now on.
+ */
+ state->info = NULL;
+
+ /*
+ * Free the port IO and memory resources, if any.
+ */
+ if (port->type != PORT_UNKNOWN)
+ port->ops->release_port(port);
+
+ /*
+ * Indicate that there isn't a port here anymore.
+ */
+ port->type = PORT_UNKNOWN;
+
+ /*
+ * Kill the tasklet, and free resources.
+ */
+ if (info) {
+ tasklet_kill(&info->tlet);
+ kfree(info);
+ }
+
state->port = NULL;
mutex_unlock(&port_mutex);
diff --git a/drivers/sn/ioc4.c b/drivers/sn/ioc4.c
index 67140a5804f..cdeff909403 100644
--- a/drivers/sn/ioc4.c
+++ b/drivers/sn/ioc4.c
@@ -310,7 +310,7 @@ ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
pci_set_drvdata(idd->idd_pdev, idd);
mutex_lock(&ioc4_mutex);
- list_add(&idd->idd_list, &ioc4_devices);
+ list_add_tail(&idd->idd_list, &ioc4_devices);
/* Add this IOC4 to all submodules */
list_for_each_entry(is, &ioc4_submodules, is_list) {
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 7a75faeb052..9ce1d01469b 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -75,6 +75,14 @@ config SPI_BUTTERFLY
inexpensive battery powered microcontroller evaluation board.
This same cable can be used to flash new firmware.
+config SPI_PXA2XX
+ tristate "PXA2xx SSP SPI master"
+ depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL
+ help
+ This enables using a PXA2xx SSP port as a SPI master controller.
+ The driver can be configured to use any SSP port and additional
+ documentation can be found a Documentation/spi/pxa2xx.
+
#
# Add new SPI master controllers in alphabetical order above this line
#
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index c2c87e845ab..1bca5f95de2 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_SPI_MASTER) += spi.o
# SPI master controller drivers (bus)
obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
+obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
# ... add above this line ...
# SPI protocol drivers (device/link on bus)
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
new file mode 100644
index 00000000000..596bf820b70
--- /dev/null
+++ b/drivers/spi/pxa2xx_spi.c
@@ -0,0 +1,1467 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/delay.h>
+#include <asm/dma.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx_spi.h>
+
+MODULE_AUTHOR("Stephen Street");
+MODULE_DESCRIPTION("PXA2xx SSP SPI Contoller");
+MODULE_LICENSE("GPL");
+
+#define MAX_BUSES 3
+
+#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
+#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
+#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
+
+#define DEFINE_SSP_REG(reg, off) \
+static inline u32 read_##reg(void *p) { return __raw_readl(p + (off)); } \
+static inline void write_##reg(u32 v, void *p) { __raw_writel(v, p + (off)); }
+
+DEFINE_SSP_REG(SSCR0, 0x00)
+DEFINE_SSP_REG(SSCR1, 0x04)
+DEFINE_SSP_REG(SSSR, 0x08)
+DEFINE_SSP_REG(SSITR, 0x0c)
+DEFINE_SSP_REG(SSDR, 0x10)
+DEFINE_SSP_REG(SSTO, 0x28)
+DEFINE_SSP_REG(SSPSP, 0x2c)
+
+#define START_STATE ((void*)0)
+#define RUNNING_STATE ((void*)1)
+#define DONE_STATE ((void*)2)
+#define ERROR_STATE ((void*)-1)
+
+#define QUEUE_RUNNING 0
+#define QUEUE_STOPPED 1
+
+struct driver_data {
+ /* Driver model hookup */
+ struct platform_device *pdev;
+
+ /* SPI framework hookup */
+ enum pxa_ssp_type ssp_type;
+ struct spi_master *master;
+
+ /* PXA hookup */
+ struct pxa2xx_spi_master *master_info;
+
+ /* DMA setup stuff */
+ int rx_channel;
+ int tx_channel;
+ u32 *null_dma_buf;
+
+ /* SSP register addresses */
+ void *ioaddr;
+ u32 ssdr_physical;
+
+ /* SSP masks*/
+ u32 dma_cr1;
+ u32 int_cr1;
+ u32 clear_sr;
+ u32 mask_sr;
+
+ /* Driver message queue */
+ struct workqueue_struct *workqueue;
+ struct work_struct pump_messages;
+ spinlock_t lock;
+ struct list_head queue;
+ int busy;
+ int run;
+
+ /* Message Transfer pump */
+ struct tasklet_struct pump_transfers;
+
+ /* Current message transfer state info */
+ struct spi_message* cur_msg;
+ struct spi_transfer* cur_transfer;
+ struct chip_data *cur_chip;
+ size_t len;
+ void *tx;
+ void *tx_end;
+ void *rx;
+ void *rx_end;
+ int dma_mapped;
+ dma_addr_t rx_dma;
+ dma_addr_t tx_dma;
+ size_t rx_map_len;
+ size_t tx_map_len;
+ u8 n_bytes;
+ u32 dma_width;
+ int cs_change;
+ void (*write)(struct driver_data *drv_data);
+ void (*read)(struct driver_data *drv_data);
+ irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
+ void (*cs_control)(u32 command);
+};
+
+struct chip_data {
+ u32 cr0;
+ u32 cr1;
+ u32 to;
+ u32 psp;
+ u32 timeout;
+ u8 n_bytes;
+ u32 dma_width;
+ u32 dma_burst_size;
+ u32 threshold;
+ u32 dma_threshold;
+ u8 enable_dma;
+ u8 bits_per_word;
+ u32 speed_hz;
+ void (*write)(struct driver_data *drv_data);
+ void (*read)(struct driver_data *drv_data);
+ void (*cs_control)(u32 command);
+};
+
+static void pump_messages(void *data);
+
+static int flush(struct driver_data *drv_data)
+{
+ unsigned long limit = loops_per_jiffy << 1;
+
+ void *reg = drv_data->ioaddr;
+
+ do {
+ while (read_SSSR(reg) & SSSR_RNE) {
+ read_SSDR(reg);
+ }
+ } while ((read_SSSR(reg) & SSSR_BSY) && limit--);
+ write_SSSR(SSSR_ROR, reg);
+
+ return limit;
+}
+
+static void restore_state(struct driver_data *drv_data)
+{
+ void *reg = drv_data->ioaddr;
+
+ /* Clear status and disable clock */
+ write_SSSR(drv_data->clear_sr, reg);
+ write_SSCR0(drv_data->cur_chip->cr0 & ~SSCR0_SSE, reg);
+
+ /* Load the registers */
+ write_SSCR1(drv_data->cur_chip->cr1, reg);
+ write_SSCR0(drv_data->cur_chip->cr0, reg);
+ if (drv_data->ssp_type != PXA25x_SSP) {
+ write_SSTO(0, reg);
+ write_SSPSP(drv_data->cur_chip->psp, reg);
+ }
+}
+
+static void null_cs_control(u32 command)
+{
+}
+
+static void null_writer(struct driver_data *drv_data)
+{
+ void *reg = drv_data->ioaddr;
+ u8 n_bytes = drv_data->n_bytes;
+
+ while ((read_SSSR(reg) & SSSR_TNF)
+ && (drv_data->tx < drv_data->tx_end)) {
+ write_SSDR(0, reg);
+ drv_data->tx += n_bytes;
+ }
+}
+
+static void null_reader(struct driver_data *drv_data)
+{
+ void *reg = drv_data->ioaddr;
+ u8 n_bytes = drv_data->n_bytes;
+
+ while ((read_SSSR(reg) & SSSR_RNE)
+ && (drv_data->rx < drv_data->rx_end)) {
+ read_SSDR(reg);
+ drv_data->rx += n_bytes;
+ }
+}
+
+static void u8_writer(struct driver_data *drv_data)
+{
+ void *reg = drv_data->ioaddr;
+
+ while ((read_SSSR(reg) & SSSR_TNF)
+ && (drv_data->tx < drv_data->tx_end)) {
+ write_SSDR(*(u8 *)(drv_data->tx), reg);
+ ++drv_data->tx;
+ }
+}
+
+static void u8_reader(struct driver_data *drv_data)
+{
+ void *reg = drv_data->ioaddr;
+
+ while ((read_SSSR(reg) & SSSR_RNE)
+ && (drv_data->rx < drv_data->rx_end)) {
+ *(u8 *)(drv_data->rx) = read_SSDR(reg);
+ ++drv_data->rx;
+ }
+}
+
+static void u16_writer(struct driver_data *drv_data)
+{
+ void *reg = drv_data->ioaddr;
+
+ while ((read_SSSR(reg) & SSSR_TNF)
+ && (drv_data->tx < drv_data->tx_end)) {
+ write_SSDR(*(u16 *)(drv_data->tx), reg);
+ drv_data->tx += 2;
+ }
+}
+
+static void u16_reader(struct driver_data *drv_data)
+{
+ void *reg = drv_data->ioaddr;
+
+ while ((read_SSSR(reg) & SSSR_RNE)
+ && (drv_data->rx < drv_data->rx_end)) {
+ *(u16 *)(drv_data->rx) = read_SSDR(reg);
+ drv_data->rx += 2;
+ }
+}
+static void u32_writer(struct driver_data *drv_data)
+{
+ void *reg = drv_data->ioaddr;
+
+ while ((read_SSSR(reg) & SSSR_TNF)
+ && (drv_data->tx < drv_data->tx_end)) {
+ write_SSDR(*(u32 *)(drv_data->tx), reg);
+ drv_data->tx += 4;
+ }
+}
+
+static void u32_reader(struct driver_data *drv_data)
+{
+ void *reg = drv_data->ioaddr;
+
+ while ((read_SSSR(reg) & SSSR_RNE)
+ && (drv_data->rx < drv_data->rx_end)) {
+ *(u32 *)(drv_data->rx) = read_SSDR(reg);
+ drv_data->rx += 4;
+ }
+}
+
+static void *next_transfer(struct driver_data *drv_data)
+{
+ struct spi_message *msg = drv_data->cur_msg;
+ struct spi_transfer *trans = drv_data->cur_transfer;
+
+ /* Move to next transfer */
+ if (trans->transfer_list.next != &msg->transfers) {
+ drv_data->cur_transfer =
+ list_entry(trans->transfer_list.next,
+ struct spi_transfer,
+ transfer_list);
+ return RUNNING_STATE;
+ } else
+ return DONE_STATE;
+}
+
+static int map_dma_buffers(struct driver_data *drv_data)
+{
+ struct spi_message *msg = drv_data->cur_msg;
+ struct device *dev = &msg->spi->dev;
+
+ if (!drv_data->cur_chip->enable_dma)
+ return 0;
+
+ if (msg->is_dma_mapped)
+ return drv_data->rx_dma && drv_data->tx_dma;
+
+ if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
+ return 0;
+
+ /* Modify setup if rx buffer is null */
+ if (drv_data->rx == NULL) {
+ *drv_data->null_dma_buf = 0;
+ drv_data->rx = drv_data->null_dma_buf;
+ drv_data->rx_map_len = 4;
+ } else
+ drv_data->rx_map_len = drv_data->len;
+
+
+ /* Modify setup if tx buffer is null */
+ if (drv_data->tx == NULL) {
+ *drv_data->null_dma_buf = 0;
+ drv_data->tx = drv_data->null_dma_buf;
+ drv_data->tx_map_len = 4;
+ } else
+ drv_data->tx_map_len = drv_data->len;
+
+ /* Stream map the rx buffer */
+ drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
+ drv_data->rx_map_len,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(drv_data->rx_dma))
+ return 0;
+
+ /* Stream map the tx buffer */
+ drv_data->tx_dma = dma_map_single(dev, drv_data->tx,
+ drv_data->tx_map_len,
+ DMA_TO_DEVICE);
+
+ if (dma_mapping_error(drv_data->tx_dma)) {
+ dma_unmap_single(dev, drv_data->rx_dma,
+ drv_data->rx_map_len, DMA_FROM_DEVICE);
+ return 0;
+ }
+
+ return 1;
+}
+
+static void unmap_dma_buffers(struct driver_data *drv_data)
+{
+ struct device *dev;
+
+ if (!drv_data->dma_mapped)
+ return;
+
+ if (!drv_data->cur_msg->is_dma_mapped) {
+ dev = &drv_data->cur_msg->spi->dev;
+ dma_unmap_single(dev, drv_data->rx_dma,
+ drv_data->rx_map_len, DMA_FROM_DEVICE);
+ dma_unmap_single(dev, drv_data->tx_dma,
+ drv_data->tx_map_len, DMA_TO_DEVICE);
+ }
+
+ drv_data->dma_mapped = 0;
+}
+
+/* caller already set message->status; dma and pio irqs are blocked */
+static void giveback(struct spi_message *message, struct driver_data *drv_data)
+{
+ struct spi_transfer* last_transfer;
+
+ last_transfer = list_entry(message->transfers.prev,
+ struct spi_transfer,
+ transfer_list);
+
+ if (!last_transfer->cs_change)
+ drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+ message->state = NULL;
+ if (message->complete)
+ message->complete(message->context);
+
+ drv_data->cur_msg = NULL;
+ drv_data->cur_transfer = NULL;
+ drv_data->cur_chip = NULL;
+ queue_work(drv_data->workqueue, &drv_data->pump_messages);
+}
+
+static int wait_ssp_rx_stall(void *ioaddr)
+{
+ unsigned long limit = loops_per_jiffy << 1;
+
+ while ((read_SSSR(ioaddr) & SSSR_BSY) && limit--)
+ cpu_relax();
+
+ return limit;
+}
+
+static int wait_dma_channel_stop(int channel)
+{
+ unsigned long limit = loops_per_jiffy << 1;
+
+ while (!(DCSR(channel) & DCSR_STOPSTATE) && limit--)
+ cpu_relax();
+
+ return limit;
+}
+
+static void dma_handler(int channel, void *data, struct pt_regs *regs)
+{
+ struct driver_data *drv_data = data;
+ struct spi_message *msg = drv_data->cur_msg;
+ void *reg = drv_data->ioaddr;
+ u32 irq_status = DCSR(channel) & DMA_INT_MASK;
+ u32 trailing_sssr = 0;
+
+ if (irq_status & DCSR_BUSERR) {
+
+ /* Disable interrupts, clear status and reset DMA */
+ if (drv_data->ssp_type != PXA25x_SSP)
+ write_SSTO(0, reg);
+ write_SSSR(drv_data->clear_sr, reg);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+ DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+ DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+
+ if (flush(drv_data) == 0)
+ dev_err(&drv_data->pdev->dev,
+ "dma_handler: flush fail\n");
+
+ unmap_dma_buffers(drv_data);
+
+ if (channel == drv_data->tx_channel)
+ dev_err(&drv_data->pdev->dev,
+ "dma_handler: bad bus address on "
+ "tx channel %d, source %x target = %x\n",
+ channel, DSADR(channel), DTADR(channel));
+ else
+ dev_err(&drv_data->pdev->dev,
+ "dma_handler: bad bus address on "
+ "rx channel %d, source %x target = %x\n",
+ channel, DSADR(channel), DTADR(channel));
+
+ msg->state = ERROR_STATE;
+ tasklet_schedule(&drv_data->pump_transfers);
+ }
+
+ /* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */
+ if ((drv_data->ssp_type == PXA25x_SSP)
+ && (channel == drv_data->tx_channel)
+ && (irq_status & DCSR_ENDINTR)) {
+
+ /* Wait for rx to stall */
+ if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
+ dev_err(&drv_data->pdev->dev,
+ "dma_handler: ssp rx stall failed\n");
+
+ /* Clear and disable interrupts on SSP and DMA channels*/
+ write_SSSR(drv_data->clear_sr, reg);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+ DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+ DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+ if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
+ dev_err(&drv_data->pdev->dev,
+ "dma_handler: dma rx channel stop failed\n");
+
+ unmap_dma_buffers(drv_data);
+
+ /* Read trailing bytes */
+ /* Calculate number of trailing bytes, read them */
+ trailing_sssr = read_SSSR(reg);
+ if ((trailing_sssr & 0xf008) != 0xf000) {
+ drv_data->rx = drv_data->rx_end -
+ (((trailing_sssr >> 12) & 0x0f) + 1);
+ drv_data->read(drv_data);
+ }
+ msg->actual_length += drv_data->len;
+
+ /* Release chip select if requested, transfer delays are
+ * handled in pump_transfers */
+ if (drv_data->cs_change)
+ drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+ /* Move to next transfer */
+ msg->state = next_transfer(drv_data);
+
+ /* Schedule transfer tasklet */
+ tasklet_schedule(&drv_data->pump_transfers);
+ }
+}
+
+static irqreturn_t dma_transfer(struct driver_data *drv_data)
+{
+ u32 irq_status;
+ u32 trailing_sssr = 0;
+ struct spi_message *msg = drv_data->cur_msg;
+ void *reg = drv_data->ioaddr;
+
+ irq_status = read_SSSR(reg) & drv_data->mask_sr;
+ if (irq_status & SSSR_ROR) {
+ /* Clear and disable interrupts on SSP and DMA channels*/
+ if (drv_data->ssp_type != PXA25x_SSP)
+ write_SSTO(0, reg);
+ write_SSSR(drv_data->clear_sr, reg);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+ DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+ DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+ unmap_dma_buffers(drv_data);
+
+ if (flush(drv_data) == 0)
+ dev_err(&drv_data->pdev->dev,
+ "dma_transfer: flush fail\n");
+
+ dev_warn(&drv_data->pdev->dev, "dma_transfer: fifo overun\n");
+
+ drv_data->cur_msg->state = ERROR_STATE;
+ tasklet_schedule(&drv_data->pump_transfers);
+
+ return IRQ_HANDLED;
+ }
+
+ /* Check for false positive timeout */
+ if ((irq_status & SSSR_TINT) && DCSR(drv_data->tx_channel) & DCSR_RUN) {
+ write_SSSR(SSSR_TINT, reg);
+ return IRQ_HANDLED;
+ }
+
+ if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {
+
+ /* Clear and disable interrupts on SSP and DMA channels*/
+ if (drv_data->ssp_type != PXA25x_SSP)
+ write_SSTO(0, reg);
+ write_SSSR(drv_data->clear_sr, reg);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+ DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+ DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+
+ if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
+ dev_err(&drv_data->pdev->dev,
+ "dma_transfer: dma rx channel stop failed\n");
+
+ if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
+ dev_err(&drv_data->pdev->dev,
+ "dma_transfer: ssp rx stall failed\n");
+
+ unmap_dma_buffers(drv_data);
+
+ /* Calculate number of trailing bytes, read them */
+ trailing_sssr = read_SSSR(reg);
+ if ((trailing_sssr & 0xf008) != 0xf000) {
+ drv_data->rx = drv_data->rx_end -
+ (((trailing_sssr >> 12) & 0x0f) + 1);
+ drv_data->read(drv_data);
+ }
+ msg->actual_length += drv_data->len;
+
+ /* Release chip select if requested, transfer delays are
+ * handled in pump_transfers */
+ if (drv_data->cs_change)
+ drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+ /* Move to next transfer */
+ msg->state = next_transfer(drv_data);
+
+ /* Schedule transfer tasklet */
+ tasklet_schedule(&drv_data->pump_transfers);
+
+ return IRQ_HANDLED;
+ }
+
+ /* Opps problem detected */
+ return IRQ_NONE;
+}
+
+static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
+{
+ u32 irq_status;
+ struct spi_message *msg = drv_data->cur_msg;
+ void *reg = drv_data->ioaddr;
+ irqreturn_t handled = IRQ_NONE;
+ unsigned long limit = loops_per_jiffy << 1;
+
+ while ((irq_status = (read_SSSR(reg) & drv_data->mask_sr))) {
+
+ if (irq_status & SSSR_ROR) {
+
+ /* Clear and disable interrupts */
+ if (drv_data->ssp_type != PXA25x_SSP)
+ write_SSTO(0, reg);
+ write_SSSR(drv_data->clear_sr, reg);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
+
+ if (flush(drv_data) == 0)
+ dev_err(&drv_data->pdev->dev,
+ "interrupt_transfer: flush fail\n");
+
+ dev_warn(&drv_data->pdev->dev,
+ "interrupt_transfer: fifo overun\n");
+
+ msg->state = ERROR_STATE;
+ tasklet_schedule(&drv_data->pump_transfers);
+
+ return IRQ_HANDLED;
+ }
+
+ /* Look for false positive timeout */
+ if ((irq_status & SSSR_TINT)
+ && (drv_data->rx < drv_data->rx_end))
+ write_SSSR(SSSR_TINT, reg);
+
+ /* Pump data */
+ drv_data->read(drv_data);
+ drv_data->write(drv_data);
+
+ if (drv_data->tx == drv_data->tx_end) {
+ /* Disable tx interrupt */
+ write_SSCR1(read_SSCR1(reg) & ~SSCR1_TIE, reg);
+
+ /* PXA25x_SSP has no timeout, read trailing bytes */
+ if (drv_data->ssp_type == PXA25x_SSP) {
+ while ((read_SSSR(reg) & SSSR_BSY) && limit--)
+ drv_data->read(drv_data);
+
+ if (limit == 0)
+ dev_err(&drv_data->pdev->dev,
+ "interrupt_transfer: "
+ "trailing byte read failed\n");
+ }
+ }
+
+ if ((irq_status & SSSR_TINT)
+ || (drv_data->rx == drv_data->rx_end)) {
+
+ /* Clear timeout */
+ if (drv_data->ssp_type != PXA25x_SSP)
+ write_SSTO(0, reg);
+ write_SSSR(drv_data->clear_sr, reg);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
+
+ /* Update total byte transfered */
+ msg->actual_length += drv_data->len;
+
+ /* Release chip select if requested, transfer delays are
+ * handled in pump_transfers */
+ if (drv_data->cs_change)
+ drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+ /* Move to next transfer */
+ msg->state = next_transfer(drv_data);
+
+ /* Schedule transfer tasklet */
+ tasklet_schedule(&drv_data->pump_transfers);
+
+ return IRQ_HANDLED;
+ }
+
+ /* We did something */
+ handled = IRQ_HANDLED;
+ }
+
+ return handled;
+}
+
+static irqreturn_t ssp_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct driver_data *drv_data = (struct driver_data *)dev_id;
+
+ if (!drv_data->cur_msg) {
+ dev_err(&drv_data->pdev->dev, "bad message state "
+ "in interrupt handler\n");
+ /* Never fail */
+ return IRQ_HANDLED;
+ }
+
+ return drv_data->transfer_handler(drv_data);
+}
+
+static void pump_transfers(unsigned long data)
+{
+ struct driver_data *drv_data = (struct driver_data *)data;
+ struct spi_message *message = NULL;
+ struct spi_transfer *transfer = NULL;
+ struct spi_transfer *previous = NULL;
+ struct chip_data *chip = NULL;
+ void *reg = drv_data->ioaddr;
+ u32 clk_div = 0;
+ u8 bits = 0;
+ u32 speed = 0;
+ u32 cr0;
+
+ /* Get current state information */
+ message = drv_data->cur_msg;
+ transfer = drv_data->cur_transfer;
+ chip = drv_data->cur_chip;
+
+ /* Handle for abort */
+ if (message->state == ERROR_STATE) {
+ message->status = -EIO;
+ giveback(message, drv_data);
+ return;
+ }
+
+ /* Handle end of message */
+ if (message->state == DONE_STATE) {
+ message->status = 0;
+ giveback(message, drv_data);
+ return;
+ }
+
+ /* Delay if requested at end of transfer*/
+ if (message->state == RUNNING_STATE) {
+ previous = list_entry(transfer->transfer_list.prev,
+ struct spi_transfer,
+ transfer_list);
+ if (previous->delay_usecs)
+ udelay(previous->delay_usecs);
+ }
+
+ /* Setup the transfer state based on the type of transfer */
+ if (flush(drv_data) == 0) {
+ dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
+ message->status = -EIO;
+ giveback(message, drv_data);
+ return;
+ }
+ drv_data->n_bytes = chip->n_bytes;
+ drv_data->dma_width = chip->dma_width;
+ drv_data->cs_control = chip->cs_control;
+ drv_data->tx = (void *)transfer->tx_buf;
+ drv_data->tx_end = drv_data->tx + transfer->len;
+ drv_data->rx = transfer->rx_buf;
+ drv_data->rx_end = drv_data->rx + transfer->len;
+ drv_data->rx_dma = transfer->rx_dma;
+ drv_data->tx_dma = transfer->tx_dma;
+ drv_data->len = transfer->len;
+ drv_data->write = drv_data->tx ? chip->write : null_writer;
+ drv_data->read = drv_data->rx ? chip->read : null_reader;
+ drv_data->cs_change = transfer->cs_change;
+
+ /* Change speed and bit per word on a per transfer */
+ if (transfer->speed_hz || transfer->bits_per_word) {
+
+ /* Disable clock */
+ write_SSCR0(chip->cr0 & ~SSCR0_SSE, reg);
+ cr0 = chip->cr0;
+ bits = chip->bits_per_word;
+ speed = chip->speed_hz;
+
+ if (transfer->speed_hz)
+ speed = transfer->speed_hz;
+
+ if (transfer->bits_per_word)
+ bits = transfer->bits_per_word;
+
+ if (reg == SSP1_VIRT)
+ clk_div = SSP1_SerClkDiv(speed);
+ else if (reg == SSP2_VIRT)
+ clk_div = SSP2_SerClkDiv(speed);
+ else if (reg == SSP3_VIRT)
+ clk_div = SSP3_SerClkDiv(speed);
+
+ if (bits <= 8) {
+ drv_data->n_bytes = 1;
+ drv_data->dma_width = DCMD_WIDTH1;
+ drv_data->read = drv_data->read != null_reader ?
+ u8_reader : null_reader;
+ drv_data->write = drv_data->write != null_writer ?
+ u8_writer : null_writer;
+ } else if (bits <= 16) {
+ drv_data->n_bytes = 2;
+ drv_data->dma_width = DCMD_WIDTH2;
+ drv_data->read = drv_data->read != null_reader ?
+ u16_reader : null_reader;
+ drv_data->write = drv_data->write != null_writer ?
+ u16_writer : null_writer;
+ } else if (bits <= 32) {
+ drv_data->n_bytes = 4;
+ drv_data->dma_width = DCMD_WIDTH4;
+ drv_data->read = drv_data->read != null_reader ?
+ u32_reader : null_reader;
+ drv_data->write = drv_data->write != null_writer ?
+ u32_writer : null_writer;
+ }
+
+ cr0 = clk_div
+ | SSCR0_Motorola
+ | SSCR0_DataSize(bits & 0x0f)
+ | SSCR0_SSE
+ | (bits > 16 ? SSCR0_EDSS : 0);
+
+ /* Start it back up */
+ write_SSCR0(cr0, reg);
+ }
+
+ message->state = RUNNING_STATE;
+
+ /* Try to map dma buffer and do a dma transfer if successful */
+ if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) {
+
+ /* Ensure we have the correct interrupt handler */
+ drv_data->transfer_handler = dma_transfer;
+
+ /* Setup rx DMA Channel */
+ DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+ DSADR(drv_data->rx_channel) = drv_data->ssdr_physical;
+ DTADR(drv_data->rx_channel) = drv_data->rx_dma;
+ if (drv_data->rx == drv_data->null_dma_buf)
+ /* No target address increment */
+ DCMD(drv_data->rx_channel) = DCMD_FLOWSRC
+ | drv_data->dma_width
+ | chip->dma_burst_size
+ | drv_data->len;
+ else
+ DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR
+ | DCMD_FLOWSRC
+ | drv_data->dma_width
+ | chip->dma_burst_size
+ | drv_data->len;
+
+ /* Setup tx DMA Channel */
+ DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+ DSADR(drv_data->tx_channel) = drv_data->tx_dma;
+ DTADR(drv_data->tx_channel) = drv_data->ssdr_physical;
+ if (drv_data->tx == drv_data->null_dma_buf)
+ /* No source address increment */
+ DCMD(drv_data->tx_channel) = DCMD_FLOWTRG
+ | drv_data->dma_width
+ | chip->dma_burst_size
+ | drv_data->len;
+ else
+ DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR
+ | DCMD_FLOWTRG
+ | drv_data->dma_width
+ | chip->dma_burst_size
+ | drv_data->len;
+
+ /* Enable dma end irqs on SSP to detect end of transfer */
+ if (drv_data->ssp_type == PXA25x_SSP)
+ DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN;
+
+ /* Fix me, need to handle cs polarity */
+ drv_data->cs_control(PXA2XX_CS_ASSERT);
+
+ /* Go baby, go */
+ write_SSSR(drv_data->clear_sr, reg);
+ DCSR(drv_data->rx_channel) |= DCSR_RUN;
+ DCSR(drv_data->tx_channel) |= DCSR_RUN;
+ if (drv_data->ssp_type != PXA25x_SSP)
+ write_SSTO(chip->timeout, reg);
+ write_SSCR1(chip->cr1
+ | chip->dma_threshold
+ | drv_data->dma_cr1,
+ reg);
+ } else {
+ /* Ensure we have the correct interrupt handler */
+ drv_data->transfer_handler = interrupt_transfer;
+
+ /* Fix me, need to handle cs polarity */
+ drv_data->cs_control(PXA2XX_CS_ASSERT);
+
+ /* Go baby, go */
+ write_SSSR(drv_data->clear_sr, reg);
+ if (drv_data->ssp_type != PXA25x_SSP)
+ write_SSTO(chip->timeout, reg);
+ write_SSCR1(chip->cr1
+ | chip->threshold
+ | drv_data->int_cr1,
+ reg);
+ }
+}
+
+static void pump_messages(void *data)
+{
+ struct driver_data *drv_data = data;
+ unsigned long flags;
+
+ /* Lock queue and check for queue work */
+ spin_lock_irqsave(&drv_data->lock, flags);
+ if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
+ drv_data->busy = 0;
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+ return;
+ }
+
+ /* Make sure we are not already running a message */
+ if (drv_data->cur_msg) {
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+ return;
+ }
+
+ /* Extract head of queue */
+ drv_data->cur_msg = list_entry(drv_data->queue.next,
+ struct spi_message, queue);
+ list_del_init(&drv_data->cur_msg->queue);
+ drv_data->busy = 1;
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ /* Initial message state*/
+ drv_data->cur_msg->state = START_STATE;
+ drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
+ struct spi_transfer,
+ transfer_list);
+
+ /* Setup the SSP using the per chip configuration */
+ drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
+ restore_state(drv_data);
+
+ /* Mark as busy and launch transfers */
+ tasklet_schedule(&drv_data->pump_transfers);
+}
+
+static int transfer(struct spi_device *spi, struct spi_message *msg)
+{
+ struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+ unsigned long flags;
+
+ spin_lock_irqsave(&drv_data->lock, flags);
+
+ if (drv_data->run == QUEUE_STOPPED) {
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+ return -ESHUTDOWN;
+ }
+
+ msg->actual_length = 0;
+ msg->status = -EINPROGRESS;
+ msg->state = START_STATE;
+
+ list_add_tail(&msg->queue, &drv_data->queue);
+
+ if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
+ queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ return 0;
+}
+
+static int setup(struct spi_device *spi)
+{
+ struct pxa2xx_spi_chip *chip_info = NULL;
+ struct chip_data *chip;
+ struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+ unsigned int clk_div;
+
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+ if (drv_data->ssp_type != PXA25x_SSP
+ && (spi->bits_per_word < 4 || spi->bits_per_word > 32))
+ return -EINVAL;
+ else if (spi->bits_per_word < 4 || spi->bits_per_word > 16)
+ return -EINVAL;
+
+ /* Only alloc (or use chip_info) on first setup */
+ chip = spi_get_ctldata(spi);
+ if (chip == NULL) {
+ chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->cs_control = null_cs_control;
+ chip->enable_dma = 0;
+ chip->timeout = 5;
+ chip->threshold = SSCR1_RxTresh(1) | SSCR1_TxTresh(1);
+ chip->dma_burst_size = drv_data->master_info->enable_dma ?
+ DCMD_BURST8 : 0;
+
+ chip_info = spi->controller_data;
+ }
+
+ /* chip_info isn't always needed */
+ if (chip_info) {
+ if (chip_info->cs_control)
+ chip->cs_control = chip_info->cs_control;
+
+ chip->timeout = (chip_info->timeout_microsecs * 10000) / 2712;
+
+ chip->threshold = SSCR1_RxTresh(chip_info->rx_threshold)
+ | SSCR1_TxTresh(chip_info->tx_threshold);
+
+ chip->enable_dma = chip_info->dma_burst_size != 0
+ && drv_data->master_info->enable_dma;
+ chip->dma_threshold = 0;
+
+ if (chip->enable_dma) {
+ if (chip_info->dma_burst_size <= 8) {
+ chip->dma_threshold = SSCR1_RxTresh(8)
+ | SSCR1_TxTresh(8);
+ chip->dma_burst_size = DCMD_BURST8;
+ } else if (chip_info->dma_burst_size <= 16) {
+ chip->dma_threshold = SSCR1_RxTresh(16)
+ | SSCR1_TxTresh(16);
+ chip->dma_burst_size = DCMD_BURST16;
+ } else {
+ chip->dma_threshold = SSCR1_RxTresh(32)
+ | SSCR1_TxTresh(32);
+ chip->dma_burst_size = DCMD_BURST32;
+ }
+ }
+
+
+ if (chip_info->enable_loopback)
+ chip->cr1 = SSCR1_LBM;
+ }
+
+ if (drv_data->ioaddr == SSP1_VIRT)
+ clk_div = SSP1_SerClkDiv(spi->max_speed_hz);
+ else if (drv_data->ioaddr == SSP2_VIRT)
+ clk_div = SSP2_SerClkDiv(spi->max_speed_hz);
+ else if (drv_data->ioaddr == SSP3_VIRT)
+ clk_div = SSP3_SerClkDiv(spi->max_speed_hz);
+ else
+ return -ENODEV;
+ chip->speed_hz = spi->max_speed_hz;
+
+ chip->cr0 = clk_div
+ | SSCR0_Motorola
+ | SSCR0_DataSize(spi->bits_per_word & 0x0f)
+ | SSCR0_SSE
+ | (spi->bits_per_word > 16 ? SSCR0_EDSS : 0);
+ chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) << 4)
+ | (((spi->mode & SPI_CPOL) != 0) << 3);
+
+ /* NOTE: PXA25x_SSP _could_ use external clocking ... */
+ if (drv_data->ssp_type != PXA25x_SSP)
+ dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+ spi->bits_per_word,
+ (CLOCK_SPEED_HZ)
+ / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
+ spi->mode & 0x3);
+ else
+ dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+ spi->bits_per_word,
+ (CLOCK_SPEED_HZ/2)
+ / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
+ spi->mode & 0x3);
+
+ if (spi->bits_per_word <= 8) {
+ chip->n_bytes = 1;
+ chip->dma_width = DCMD_WIDTH1;
+ chip->read = u8_reader;
+ chip->write = u8_writer;
+ } else if (spi->bits_per_word <= 16) {
+ chip->n_bytes = 2;
+ chip->dma_width = DCMD_WIDTH2;
+ chip->read = u16_reader;
+ chip->write = u16_writer;
+ } else if (spi->bits_per_word <= 32) {
+ chip->cr0 |= SSCR0_EDSS;
+ chip->n_bytes = 4;
+ chip->dma_width = DCMD_WIDTH4;
+ chip->read = u32_reader;
+ chip->write = u32_writer;
+ } else {
+ dev_err(&spi->dev, "invalid wordsize\n");
+ kfree(chip);
+ return -ENODEV;
+ }
+ chip->bits_per_word = spi->bits_per_word;
+
+ spi_set_ctldata(spi, chip);
+
+ return 0;
+}
+
+static void cleanup(const struct spi_device *spi)
+{
+ struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
+
+ kfree(chip);
+}
+
+static int init_queue(struct driver_data *drv_data)
+{
+ INIT_LIST_HEAD(&drv_data->queue);
+ spin_lock_init(&drv_data->lock);
+
+ drv_data->run = QUEUE_STOPPED;
+ drv_data->busy = 0;
+
+ tasklet_init(&drv_data->pump_transfers,
+ pump_transfers, (unsigned long)drv_data);
+
+ INIT_WORK(&drv_data->pump_messages, pump_messages, drv_data);
+ drv_data->workqueue = create_singlethread_workqueue(
+ drv_data->master->cdev.dev->bus_id);
+ if (drv_data->workqueue == NULL)
+ return -EBUSY;
+
+ return 0;
+}
+
+static int start_queue(struct driver_data *drv_data)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&drv_data->lock, flags);
+
+ if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+ return -EBUSY;
+ }
+
+ drv_data->run = QUEUE_RUNNING;
+ drv_data->cur_msg = NULL;
+ drv_data->cur_transfer = NULL;
+ drv_data->cur_chip = NULL;
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+ return 0;
+}
+
+static int stop_queue(struct driver_data *drv_data)
+{
+ unsigned long flags;
+ unsigned limit = 500;
+ int status = 0;
+
+ spin_lock_irqsave(&drv_data->lock, flags);
+
+ /* This is a bit lame, but is optimized for the common execution path.
+ * A wait_queue on the drv_data->busy could be used, but then the common
+ * execution path (pump_messages) would be required to call wake_up or
+ * friends on every SPI message. Do this instead */
+ drv_data->run = QUEUE_STOPPED;
+ while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+ msleep(10);
+ spin_lock_irqsave(&drv_data->lock, flags);
+ }
+
+ if (!list_empty(&drv_data->queue) || drv_data->busy)
+ status = -EBUSY;
+
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ return status;
+}
+
+static int destroy_queue(struct driver_data *drv_data)
+{
+ int status;
+
+ status = stop_queue(drv_data);
+ if (status != 0)
+ return status;
+
+ destroy_workqueue(drv_data->workqueue);
+
+ return 0;
+}
+
+static int pxa2xx_spi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct pxa2xx_spi_master *platform_info;
+ struct spi_master *master;
+ struct driver_data *drv_data = 0;
+ struct resource *memory_resource;
+ int irq;
+ int status = 0;
+
+ platform_info = dev->platform_data;
+
+ if (platform_info->ssp_type == SSP_UNDEFINED) {
+ dev_err(&pdev->dev, "undefined SSP\n");
+ return -ENODEV;
+ }
+
+ /* Allocate master with space for drv_data and null dma buffer */
+ master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
+ if (!master) {
+ dev_err(&pdev->dev, "can not alloc spi_master\n");
+ return -ENOMEM;
+ }
+ drv_data = spi_master_get_devdata(master);
+ drv_data->master = master;
+ drv_data->master_info = platform_info;
+ drv_data->pdev = pdev;
+
+ master->bus_num = pdev->id;
+ master->num_chipselect = platform_info->num_chipselect;
+ master->cleanup = cleanup;
+ master->setup = setup;
+ master->transfer = transfer;
+
+ drv_data->ssp_type = platform_info->ssp_type;
+ drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
+ sizeof(struct driver_data)), 8);
+
+ /* Setup register addresses */
+ memory_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!memory_resource) {
+ dev_err(&pdev->dev, "memory resources not defined\n");
+ status = -ENODEV;
+ goto out_error_master_alloc;
+ }
+
+ drv_data->ioaddr = (void *)io_p2v(memory_resource->start);
+ drv_data->ssdr_physical = memory_resource->start + 0x00000010;
+ if (platform_info->ssp_type == PXA25x_SSP) {
+ drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
+ drv_data->dma_cr1 = 0;
+ drv_data->clear_sr = SSSR_ROR;
+ drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR;
+ } else {
+ drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE;
+ drv_data->dma_cr1 = SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE;
+ drv_data->clear_sr = SSSR_ROR | SSSR_TINT;
+ drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR;
+ }
+
+ /* Attach to IRQ */
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "irq resource not defined\n");
+ status = -ENODEV;
+ goto out_error_master_alloc;
+ }
+
+ status = request_irq(irq, ssp_int, SA_INTERRUPT, dev->bus_id, drv_data);
+ if (status < 0) {
+ dev_err(&pdev->dev, "can not get IRQ\n");
+ goto out_error_master_alloc;
+ }
+
+ /* Setup DMA if requested */
+ drv_data->tx_channel = -1;
+ drv_data->rx_channel = -1;
+ if (platform_info->enable_dma) {
+
+ /* Get two DMA channels (rx and tx) */
+ drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx",
+ DMA_PRIO_HIGH,
+ dma_handler,
+ drv_data);
+ if (drv_data->rx_channel < 0) {
+ dev_err(dev, "problem (%d) requesting rx channel\n",
+ drv_data->rx_channel);
+ status = -ENODEV;
+ goto out_error_irq_alloc;
+ }
+ drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx",
+ DMA_PRIO_MEDIUM,
+ dma_handler,
+ drv_data);
+ if (drv_data->tx_channel < 0) {
+ dev_err(dev, "problem (%d) requesting tx channel\n",
+ drv_data->tx_channel);
+ status = -ENODEV;
+ goto out_error_dma_alloc;
+ }
+
+ if (drv_data->ioaddr == SSP1_VIRT) {
+ DRCMRRXSSDR = DRCMR_MAPVLD
+ | drv_data->rx_channel;
+ DRCMRTXSSDR = DRCMR_MAPVLD
+ | drv_data->tx_channel;
+ } else if (drv_data->ioaddr == SSP2_VIRT) {
+ DRCMRRXSS2DR = DRCMR_MAPVLD
+ | drv_data->rx_channel;
+ DRCMRTXSS2DR = DRCMR_MAPVLD
+ | drv_data->tx_channel;
+ } else if (drv_data->ioaddr == SSP3_VIRT) {
+ DRCMRRXSS3DR = DRCMR_MAPVLD
+ | drv_data->rx_channel;
+ DRCMRTXSS3DR = DRCMR_MAPVLD
+ | drv_data->tx_channel;
+ } else {
+ dev_err(dev, "bad SSP type\n");
+ goto out_error_dma_alloc;
+ }
+ }
+
+ /* Enable SOC clock */
+ pxa_set_cken(platform_info->clock_enable, 1);
+
+ /* Load default SSP configuration */
+ write_SSCR0(0, drv_data->ioaddr);
+ write_SSCR1(SSCR1_RxTresh(4) | SSCR1_TxTresh(12), drv_data->ioaddr);
+ write_SSCR0(SSCR0_SerClkDiv(2)
+ | SSCR0_Motorola
+ | SSCR0_DataSize(8),
+ drv_data->ioaddr);
+ if (drv_data->ssp_type != PXA25x_SSP)
+ write_SSTO(0, drv_data->ioaddr);
+ write_SSPSP(0, drv_data->ioaddr);
+
+ /* Initial and start queue */
+ status = init_queue(drv_data);
+ if (status != 0) {
+ dev_err(&pdev->dev, "problem initializing queue\n");
+ goto out_error_clock_enabled;
+ }
+ status = start_queue(drv_data);
+ if (status != 0) {
+ dev_err(&pdev->dev, "problem starting queue\n");
+ goto out_error_clock_enabled;
+ }
+
+ /* Register with the SPI framework */
+ platform_set_drvdata(pdev, drv_data);
+ status = spi_register_master(master);
+ if (status != 0) {
+ dev_err(&pdev->dev, "problem registering spi master\n");
+ goto out_error_queue_alloc;
+ }
+
+ return status;
+
+out_error_queue_alloc:
+ destroy_queue(drv_data);
+
+out_error_clock_enabled:
+ pxa_set_cken(platform_info->clock_enable, 0);
+
+out_error_dma_alloc:
+ if (drv_data->tx_channel != -1)
+ pxa_free_dma(drv_data->tx_channel);
+ if (drv_data->rx_channel != -1)
+ pxa_free_dma(drv_data->rx_channel);
+
+out_error_irq_alloc:
+ free_irq(irq, drv_data);
+
+out_error_master_alloc:
+ spi_master_put(master);
+ return status;
+}
+
+static int pxa2xx_spi_remove(struct platform_device *pdev)
+{
+ struct driver_data *drv_data = platform_get_drvdata(pdev);
+ int irq;
+ int status = 0;
+
+ if (!drv_data)
+ return 0;
+
+ /* Remove the queue */
+ status = destroy_queue(drv_data);
+ if (status != 0)
+ return status;
+
+ /* Disable the SSP at the peripheral and SOC level */
+ write_SSCR0(0, drv_data->ioaddr);
+ pxa_set_cken(drv_data->master_info->clock_enable, 0);
+
+ /* Release DMA */
+ if (drv_data->master_info->enable_dma) {
+ if (drv_data->ioaddr == SSP1_VIRT) {
+ DRCMRRXSSDR = 0;
+ DRCMRTXSSDR = 0;
+ } else if (drv_data->ioaddr == SSP2_VIRT) {
+ DRCMRRXSS2DR = 0;
+ DRCMRTXSS2DR = 0;
+ } else if (drv_data->ioaddr == SSP3_VIRT) {
+ DRCMRRXSS3DR = 0;
+ DRCMRTXSS3DR = 0;
+ }
+ pxa_free_dma(drv_data->tx_channel);
+ pxa_free_dma(drv_data->rx_channel);
+ }
+
+ /* Release IRQ */
+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0)
+ free_irq(irq, drv_data);
+
+ /* Disconnect from the SPI framework */
+ spi_unregister_master(drv_data->master);
+
+ /* Prevent double remove */
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static void pxa2xx_spi_shutdown(struct platform_device *pdev)
+{
+ int status = 0;
+
+ if ((status = pxa2xx_spi_remove(pdev)) != 0)
+ dev_err(&pdev->dev, "shutdown failed with %d\n", status);
+}
+
+#ifdef CONFIG_PM
+static int suspend_devices(struct device *dev, void *pm_message)
+{
+ pm_message_t *state = pm_message;
+
+ if (dev->power.power_state.event != state->event) {
+ dev_warn(dev, "pm state does not match request\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct driver_data *drv_data = platform_get_drvdata(pdev);
+ int status = 0;
+
+ /* Check all childern for current power state */
+ if (device_for_each_child(&pdev->dev, &state, suspend_devices) != 0) {
+ dev_warn(&pdev->dev, "suspend aborted\n");
+ return -1;
+ }
+
+ status = stop_queue(drv_data);
+ if (status != 0)
+ return status;
+ write_SSCR0(0, drv_data->ioaddr);
+ pxa_set_cken(drv_data->master_info->clock_enable, 0);
+
+ return 0;
+}
+
+static int pxa2xx_spi_resume(struct platform_device *pdev)
+{
+ struct driver_data *drv_data = platform_get_drvdata(pdev);
+ int status = 0;
+
+ /* Enable the SSP clock */
+ pxa_set_cken(drv_data->master_info->clock_enable, 1);
+
+ /* Start the queue running */
+ status = start_queue(drv_data);
+ if (status != 0) {
+ dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
+ return status;
+ }
+
+ return 0;
+}
+#else
+#define pxa2xx_spi_suspend NULL
+#define pxa2xx_spi_resume NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver driver = {
+ .driver = {
+ .name = "pxa2xx-spi",
+ .bus = &platform_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = pxa2xx_spi_probe,
+ .remove = __devexit_p(pxa2xx_spi_remove),
+ .shutdown = pxa2xx_spi_shutdown,
+ .suspend = pxa2xx_spi_suspend,
+ .resume = pxa2xx_spi_resume,
+};
+
+static int __init pxa2xx_spi_init(void)
+{
+ platform_driver_register(&driver);
+
+ return 0;
+}
+module_init(pxa2xx_spi_init);
+
+static void __exit pxa2xx_spi_exit(void)
+{
+ platform_driver_unregister(&driver);
+}
+module_exit(pxa2xx_spi_exit);
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 94f5e8ed83a..7a3f733051e 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -395,7 +395,7 @@ EXPORT_SYMBOL_GPL(spi_alloc_master);
int __init_or_module
spi_register_master(struct spi_master *master)
{
- static atomic_t dyn_bus_id = ATOMIC_INIT(0);
+ static atomic_t dyn_bus_id = ATOMIC_INIT((1<<16) - 1);
struct device *dev = master->cdev.dev;
int status = -ENODEV;
int dynamic = 0;
@@ -404,7 +404,7 @@ spi_register_master(struct spi_master *master)
return -ENODEV;
/* convention: dynamically assigned bus IDs count down from the max */
- if (master->bus_num == 0) {
+ if (master->bus_num < 0) {
master->bus_num = atomic_dec_return(&dyn_bus_id);
dynamic = 1;
}
@@ -522,7 +522,8 @@ int spi_sync(struct spi_device *spi, struct spi_message *message)
}
EXPORT_SYMBOL_GPL(spi_sync);
-#define SPI_BUFSIZ (SMP_CACHE_BYTES)
+/* portable code must never pass more than 32 bytes */
+#define SPI_BUFSIZ max(32,SMP_CACHE_BYTES)
static u8 *buf;
diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c
index f037e559326..dd2f950b21a 100644
--- a/drivers/spi/spi_bitbang.c
+++ b/drivers/spi/spi_bitbang.c
@@ -138,6 +138,45 @@ static unsigned bitbang_txrx_32(
return t->len - count;
}
+int spi_bitbang_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct spi_bitbang_cs *cs = spi->controller_state;
+ u8 bits_per_word;
+ u32 hz;
+
+ if (t) {
+ bits_per_word = t->bits_per_word;
+ hz = t->speed_hz;
+ } else {
+ bits_per_word = 0;
+ hz = 0;
+ }
+
+ /* spi_transfer level calls that work per-word */
+ if (!bits_per_word)
+ bits_per_word = spi->bits_per_word;
+ if (bits_per_word <= 8)
+ cs->txrx_bufs = bitbang_txrx_8;
+ else if (bits_per_word <= 16)
+ cs->txrx_bufs = bitbang_txrx_16;
+ else if (bits_per_word <= 32)
+ cs->txrx_bufs = bitbang_txrx_32;
+ else
+ return -EINVAL;
+
+ /* nsecs = (clock period)/2 */
+ if (!hz)
+ hz = spi->max_speed_hz;
+ if (hz) {
+ cs->nsecs = (1000000000/2) / hz;
+ if (cs->nsecs > (MAX_UDELAY_MS * 1000 * 1000))
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(spi_bitbang_setup_transfer);
+
/**
* spi_bitbang_setup - default setup for per-word I/O loops
*/
@@ -145,8 +184,16 @@ int spi_bitbang_setup(struct spi_device *spi)
{
struct spi_bitbang_cs *cs = spi->controller_state;
struct spi_bitbang *bitbang;
+ int retval;
- if (!spi->max_speed_hz)
+ bitbang = spi_master_get_devdata(spi->master);
+
+ /* REVISIT: some systems will want to support devices using lsb-first
+ * bit encodings on the wire. In pure software that would be trivial,
+ * just bitbang_txrx_le_cphaX() routines shifting the other way, and
+ * some hardware controllers also have this support.
+ */
+ if ((spi->mode & SPI_LSB_FIRST) != 0)
return -EINVAL;
if (!cs) {
@@ -155,32 +202,20 @@ int spi_bitbang_setup(struct spi_device *spi)
return -ENOMEM;
spi->controller_state = cs;
}
- bitbang = spi_master_get_devdata(spi->master);
if (!spi->bits_per_word)
spi->bits_per_word = 8;
- /* spi_transfer level calls that work per-word */
- if (spi->bits_per_word <= 8)
- cs->txrx_bufs = bitbang_txrx_8;
- else if (spi->bits_per_word <= 16)
- cs->txrx_bufs = bitbang_txrx_16;
- else if (spi->bits_per_word <= 32)
- cs->txrx_bufs = bitbang_txrx_32;
- else
- return -EINVAL;
-
/* per-word shift register access, in hardware or bitbanging */
cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)];
if (!cs->txrx_word)
return -EINVAL;
- /* nsecs = (clock period)/2 */
- cs->nsecs = (1000000000/2) / (spi->max_speed_hz);
- if (cs->nsecs > MAX_UDELAY_MS * 1000)
- return -EINVAL;
+ retval = spi_bitbang_setup_transfer(spi, NULL);
+ if (retval < 0)
+ return retval;
- dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n",
+ dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
__FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
spi->bits_per_word, 2 * cs->nsecs);
@@ -246,6 +281,8 @@ static void bitbang_work(void *_bitbang)
unsigned tmp;
unsigned cs_change;
int status;
+ int (*setup_transfer)(struct spi_device *,
+ struct spi_transfer *);
m = container_of(bitbang->queue.next, struct spi_message,
queue);
@@ -262,6 +299,7 @@ static void bitbang_work(void *_bitbang)
tmp = 0;
cs_change = 1;
status = 0;
+ setup_transfer = NULL;
list_for_each_entry (t, &m->transfers, transfer_list) {
if (bitbang->shutdown) {
@@ -269,6 +307,20 @@ static void bitbang_work(void *_bitbang)
break;
}
+ /* override or restore speed and wordsize */
+ if (t->speed_hz || t->bits_per_word) {
+ setup_transfer = bitbang->setup_transfer;
+ if (!setup_transfer) {
+ status = -ENOPROTOOPT;
+ break;
+ }
+ }
+ if (setup_transfer) {
+ status = setup_transfer(spi, t);
+ if (status < 0)
+ break;
+ }
+
/* set up default clock polarity, and activate chip;
* this implicitly updates clock and spi modes as
* previously recorded for this device via setup().
@@ -325,6 +377,10 @@ static void bitbang_work(void *_bitbang)
m->status = status;
m->complete(m->context);
+ /* restore speed and wordsize */
+ if (setup_transfer)
+ setup_transfer(spi, NULL);
+
/* normally deactivate chipselect ... unless no error and
* cs_change has hinted that the next message will probably
* be for this chip too.
@@ -348,6 +404,7 @@ int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m)
{
struct spi_bitbang *bitbang;
unsigned long flags;
+ int status = 0;
m->actual_length = 0;
m->status = -EINPROGRESS;
@@ -357,11 +414,15 @@ int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m)
return -ESHUTDOWN;
spin_lock_irqsave(&bitbang->lock, flags);
- list_add_tail(&m->queue, &bitbang->queue);
- queue_work(bitbang->workqueue, &bitbang->work);
+ if (!spi->max_speed_hz)
+ status = -ENETDOWN;
+ else {
+ list_add_tail(&m->queue, &bitbang->queue);
+ queue_work(bitbang->workqueue, &bitbang->work);
+ }
spin_unlock_irqrestore(&bitbang->lock, flags);
- return 0;
+ return status;
}
EXPORT_SYMBOL_GPL(spi_bitbang_transfer);
@@ -406,6 +467,9 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
bitbang->use_dma = 0;
bitbang->txrx_bufs = spi_bitbang_bufs;
if (!bitbang->master->setup) {
+ if (!bitbang->setup_transfer)
+ bitbang->setup_transfer =
+ spi_bitbang_setup_transfer;
bitbang->master->setup = spi_bitbang_setup;
bitbang->master->cleanup = spi_bitbang_cleanup;
}
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 7860c8a5800..956b7a1e8af 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -69,7 +69,7 @@ static const char speedtch_driver_name[] = "speedtch";
#define RESUBMIT_DELAY 1000 /* milliseconds */
#define DEFAULT_BULK_ALTSETTING 1
-#define DEFAULT_ISOC_ALTSETTING 2
+#define DEFAULT_ISOC_ALTSETTING 3
#define DEFAULT_DL_512_FIRST 0
#define DEFAULT_ENABLE_ISOC 0
#define DEFAULT_SW_BUFFERING 0
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index c1211fc037d..546249843b8 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -99,11 +99,11 @@ static const char usbatm_driver_name[] = "usbatm";
#define UDSL_MAX_RCV_URBS 16
#define UDSL_MAX_SND_URBS 16
-#define UDSL_MAX_BUF_SIZE 64 * 1024 /* bytes */
+#define UDSL_MAX_BUF_SIZE 65536
#define UDSL_DEFAULT_RCV_URBS 4
#define UDSL_DEFAULT_SND_URBS 4
-#define UDSL_DEFAULT_RCV_BUF_SIZE 64 * ATM_CELL_SIZE /* bytes */
-#define UDSL_DEFAULT_SND_BUF_SIZE 64 * ATM_CELL_SIZE /* bytes */
+#define UDSL_DEFAULT_RCV_BUF_SIZE 3392 /* 64 * ATM_CELL_SIZE */
+#define UDSL_DEFAULT_SND_BUF_SIZE 3392 /* 64 * ATM_CELL_SIZE */
#define ATM_CELL_HEADER (ATM_CELL_SIZE - ATM_CELL_PAYLOAD)
@@ -135,7 +135,7 @@ MODULE_PARM_DESC(rcv_buf_bytes,
module_param(snd_buf_bytes, uint, S_IRUGO);
MODULE_PARM_DESC(snd_buf_bytes,
"Size of the buffers used for transmission, in bytes (range: 1-"
- __MODULE_STRING(UDSL_MAX_SND_BUF_SIZE) ", default: "
+ __MODULE_STRING(UDSL_MAX_BUF_SIZE) ", default: "
__MODULE_STRING(UDSL_DEFAULT_SND_BUF_SIZE) ")");
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index fbd938d4ea5..e2e00ba4e1e 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1805,6 +1805,12 @@ int usb_add_hcd(struct usb_hcd *hcd,
USB_SPEED_FULL;
hcd->self.root_hub = rhdev;
+ /* wakeup flag init defaults to "everything works" for root hubs,
+ * but drivers can override it in reset() if needed, along with
+ * recording the overall controller's system wakeup capability.
+ */
+ device_init_wakeup(&rhdev->dev, 1);
+
/* "reset" is misnamed; its role is now one-time init. the controller
* should already have been reset (and boot firmware kicked off etc).
*/
@@ -1813,13 +1819,6 @@ int usb_add_hcd(struct usb_hcd *hcd,
goto err_hcd_driver_setup;
}
- /* wakeup flag init is in transition; for now we can't rely on PCI to
- * initialize these bits properly, so we let reset() override it.
- * This init should _precede_ the reset() once PCI behaves.
- */
- device_init_wakeup(&rhdev->dev,
- device_can_wakeup(hcd->self.controller));
-
/* NOTE: root hub and controller capabilities may not be the same */
if (device_can_wakeup(hcd->self.controller)
&& device_can_wakeup(&hcd->self.root_hub->dev))
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 0c87f73f293..90b8d43c6b3 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1168,19 +1168,9 @@ static inline const char *plural(int n)
static int choose_configuration(struct usb_device *udev)
{
int i;
- u16 devstatus;
- int bus_powered;
int num_configs;
struct usb_host_config *c, *best;
- /* If this fails, assume the device is bus-powered */
- devstatus = 0;
- usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
- le16_to_cpus(&devstatus);
- bus_powered = ((devstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0);
- dev_dbg(&udev->dev, "device is %s-powered\n",
- bus_powered ? "bus" : "self");
-
best = NULL;
c = udev->config;
num_configs = udev->descriptor.bNumConfigurations;
@@ -1197,6 +1187,19 @@ static int choose_configuration(struct usb_device *udev)
* similar errors in their descriptors. If the next test
* were allowed to execute, such configurations would always
* be rejected and the devices would not work as expected.
+ * In the meantime, we run the risk of selecting a config
+ * that requires external power at a time when that power
+ * isn't available. It seems to be the lesser of two evils.
+ *
+ * Bugzilla #6448 reports a device that appears to crash
+ * when it receives a GET_DEVICE_STATUS request! We don't
+ * have any other way to tell whether a device is self-powered,
+ * but since we don't use that information anywhere but here,
+ * the call has been removed.
+ *
+ * Maybe the GET_DEVICE_STATUS call and the test below can
+ * be reinstated when device firmwares become more reliable.
+ * Don't hold your breath.
*/
#if 0
/* Rule out self-powered configs for a bus-powered device */
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 544f7589912..73f5a379d9b 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -863,7 +863,7 @@ static int ohci_restart (struct ohci_hcd *ohci)
i = ohci->num_ports;
while (i--)
ohci_writel (ohci, RH_PS_PSS,
- &ohci->regs->roothub.portstatus [temp]);
+ &ohci->regs->roothub.portstatus [i]);
ohci_dbg (ohci, "restart complete\n");
}
return 0;
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index f419bd82ab7..435273e7c85 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1557,6 +1557,9 @@ void hid_init_reports(struct hid_device *hid)
#define USB_VENDOR_ID_HP 0x03f0
#define USB_DEVICE_ID_HP_USBHUB_KB 0x020c
+#define USB_VENDOR_ID_IBM 0x04b3
+#define USB_DEVICE_ID_IBM_USBHUB_KB 0x3005
+
#define USB_VENDOR_ID_CREATIVELABS 0x062a
#define USB_DEVICE_ID_CREATIVELABS_SILVERCREST 0x0201
@@ -1681,6 +1684,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET},
{ USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVELABS_SILVERCREST, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_IBM, USB_DEVICE_ID_IBM_USBHUB_KB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_SILVERCREST, USB_DEVICE_ID_SILVERCREST_KB, HID_QUIRK_NOGET },
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 3824df33094..1fd9cb85f4c 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/usb.h>
+#include <linux/delay.h>
#define MAX_INTEL_HEX_RECORD_LENGTH 16
typedef struct _INTEL_HEX_RECORD
@@ -114,6 +115,7 @@ static int emi26_load_firmware (struct usb_device *dev)
/* De-assert reset (let the CPU run) */
err = emi26_set_reset(dev,0);
+ msleep(250); /* let device settle */
/* 2. We upload the FPGA firmware into the EMI
* Note: collect up to 1023 (yes!) bytes and send them with
@@ -150,6 +152,7 @@ static int emi26_load_firmware (struct usb_device *dev)
goto wraperr;
}
}
+ msleep(250); /* let device settle */
/* De-assert reset (let the CPU run) */
err = emi26_set_reset(dev,0);
@@ -192,6 +195,7 @@ static int emi26_load_firmware (struct usb_device *dev)
err("%s - error loading firmware: error = %d", __FUNCTION__, err);
goto wraperr;
}
+ msleep(250); /* let device settle */
/* return 1 to fail the driver inialization
* and give real driver change to load */
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 52fea2e08db..fe351371f27 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/usb.h>
+#include <linux/delay.h>
#define MAX_INTEL_HEX_RECORD_LENGTH 16
typedef struct _INTEL_HEX_RECORD
@@ -123,6 +124,7 @@ static int emi62_load_firmware (struct usb_device *dev)
/* De-assert reset (let the CPU run) */
err = emi62_set_reset(dev,0);
+ msleep(250); /* let device settle */
/* 2. We upload the FPGA firmware into the EMI
* Note: collect up to 1023 (yes!) bytes and send them with
@@ -166,6 +168,7 @@ static int emi62_load_firmware (struct usb_device *dev)
err("%s - error loading firmware: error = %d", __FUNCTION__, err);
goto wraperr;
}
+ msleep(250); /* let device settle */
/* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
@@ -228,6 +231,7 @@ static int emi62_load_firmware (struct usb_device *dev)
err("%s - error loading firmware: error = %d", __FUNCTION__, err);
goto wraperr;
}
+ msleep(250); /* let device settle */
kfree(buf);
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index 2deb4c01539..7683926a1b6 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -318,6 +318,8 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
set_register(pegasus, PhyCtrl, (indx | PHY_READ));
for (i = 0; i < REG_TIMEOUT; i++) {
ret = get_registers(pegasus, PhyCtrl, 1, data);
+ if (ret == -ESHUTDOWN)
+ goto fail;
if (data[0] & PHY_DONE)
break;
}
@@ -326,6 +328,7 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
*regd = le16_to_cpu(regdi);
return ret;
}
+fail:
if (netif_msg_drv(pegasus))
dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
@@ -354,12 +357,15 @@ static int write_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 regd)
set_register(pegasus, PhyCtrl, (indx | PHY_WRITE));
for (i = 0; i < REG_TIMEOUT; i++) {
ret = get_registers(pegasus, PhyCtrl, 1, data);
+ if (ret == -ESHUTDOWN)
+ goto fail;
if (data[0] & PHY_DONE)
break;
}
if (i < REG_TIMEOUT)
return ret;
+fail:
if (netif_msg_drv(pegasus))
dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
return -ETIMEDOUT;
@@ -387,6 +393,8 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
if (tmp & EPROM_DONE)
break;
+ if (ret == -ESHUTDOWN)
+ goto fail;
}
if (i < REG_TIMEOUT) {
ret = get_registers(pegasus, EpromData, 2, &retdatai);
@@ -394,6 +402,7 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
return ret;
}
+fail:
if (netif_msg_drv(pegasus))
dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
return -ETIMEDOUT;
@@ -433,12 +442,15 @@ static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data)
for (i = 0; i < REG_TIMEOUT; i++) {
ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
+ if (ret == -ESHUTDOWN)
+ goto fail;
if (tmp & EPROM_DONE)
break;
}
disable_eprom_write(pegasus);
if (i < REG_TIMEOUT)
return ret;
+fail:
if (netif_msg_drv(pegasus))
dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
return -ETIMEDOUT;
@@ -1378,9 +1390,8 @@ static int pegasus_suspend (struct usb_interface *intf, pm_message_t message)
struct pegasus *pegasus = usb_get_intfdata(intf);
netif_device_detach (pegasus->net);
+ cancel_delayed_work(&pegasus->carrier_check);
if (netif_running(pegasus->net)) {
- cancel_delayed_work(&pegasus->carrier_check);
-
usb_kill_urb(pegasus->rx_urb);
usb_kill_urb(pegasus->intr_urb);
}
@@ -1400,10 +1411,9 @@ static int pegasus_resume (struct usb_interface *intf)
pegasus->intr_urb->status = 0;
pegasus->intr_urb->actual_length = 0;
intr_callback(pegasus->intr_urb, NULL);
-
- queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
- CARRIER_CHECK_DELAY);
}
+ queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
+ CARRIER_CHECK_DELAY);
return 0;
}
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index f96b73f54bf..5c60be52156 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -71,6 +71,16 @@ config USB_SERIAL_ANYDATA
To compile this driver as a module, choose M here: the
module will be called anydata.
+config USB_SERIAL_ARK3116
+ tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)"
+ depends on USB_SERIAL && EXPERIMENTAL
+ help
+ Say Y here if you want to use a ARK Micro 3116 USB to Serial
+ device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ark3116
+
config USB_SERIAL_BELKIN
tristate "USB Belkin and Peracom Single Port Serial Driver"
depends on USB_SERIAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 93c21245b1a..5a0960fc9d3 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -13,6 +13,7 @@ usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y)
obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o
obj-$(CONFIG_USB_SERIAL_ANYDATA) += anydata.o
+obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o
obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o
obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o
obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index dbf1f063098..694b205f9b7 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -18,6 +18,7 @@
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0xf3d, 0x0112) }, /* AirPrime CDMA Wireless PC Card */
{ USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
+ { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless Aircard 580 */
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
new file mode 100644
index 00000000000..8dec796222a
--- /dev/null
+++ b/drivers/usb/serial/ark3116.c
@@ -0,0 +1,465 @@
+/*
+ * ark3116
+ * - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547,
+ * productid=0x0232) (used in a datacable called KQ-U8A)
+ *
+ * - based on code by krisfx -> thanks !!
+ * (see http://www.linuxquestions.org/questions/showthread.php?p=2184457#post2184457)
+ *
+ * - based on logs created by usbsnoopy
+ *
+ * Author : Simon Schulz [ark3116_driver<AT>auctionant.de]
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+
+static int debug;
+
+static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x6547, 0x0232) },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct ark3116_private {
+ spinlock_t lock;
+ u8 termios_initialized;
+};
+
+static inline void ARK3116_SND(struct usb_serial *serial, int seq,
+ __u8 request, __u8 requesttype,
+ __u16 value, __u16 index)
+{
+ int result;
+ result = usb_control_msg(serial->dev,
+ usb_sndctrlpipe(serial->dev,0),
+ request, requesttype, value, index,
+ NULL,0x00, 1000);
+ dbg("%03d > ok",seq);
+}
+
+static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
+ __u8 request, __u8 requesttype,
+ __u16 value, __u16 index, __u8 expected,
+ char *buf)
+{
+ int result;
+ result = usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev,0),
+ request, requesttype, value, index,
+ buf, 0x0000001, 1000);
+ if (result)
+ dbg("%03d < %d bytes [0x%02X]",seq, result, buf[0]);
+ else
+ dbg("%03d < 0 bytes", seq);
+}
+
+
+static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
+ __u8 request, __u8 requesttype,
+ __u16 value, __u16 index, char *buf)
+{
+ usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev,0),
+ request, requesttype, value, index,
+ buf, 0x0000001, 1000);
+}
+
+
+static int ark3116_attach(struct usb_serial *serial)
+{
+ char *buf;
+ struct ark3116_private *priv;
+ int i;
+
+ for (i = 0; i < serial->num_ports; ++i) {
+ priv = kmalloc (sizeof (struct ark3116_private), GFP_KERNEL);
+ if (!priv)
+ goto cleanup;
+ memset (priv, 0x00, sizeof (struct ark3116_private));
+ spin_lock_init(&priv->lock);
+
+ usb_set_serial_port_data(serial->port[i], priv);
+ }
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf) {
+ dbg("error kmalloc -> out of mem ?");
+ goto cleanup;
+ }
+
+ /* 3 */
+ ARK3116_SND(serial, 3,0xFE,0x40,0x0008,0x0002);
+ ARK3116_SND(serial, 4,0xFE,0x40,0x0008,0x0001);
+ ARK3116_SND(serial, 5,0xFE,0x40,0x0000,0x0008);
+ ARK3116_SND(serial, 6,0xFE,0x40,0x0000,0x000B);
+
+ /* <-- seq7 */
+ ARK3116_RCV(serial, 7,0xFE,0xC0,0x0000,0x0003, 0x00, buf);
+ ARK3116_SND(serial, 8,0xFE,0x40,0x0080,0x0003);
+ ARK3116_SND(serial, 9,0xFE,0x40,0x001A,0x0000);
+ ARK3116_SND(serial,10,0xFE,0x40,0x0000,0x0001);
+ ARK3116_SND(serial,11,0xFE,0x40,0x0000,0x0003);
+
+ /* <-- seq12 */
+ ARK3116_RCV(serial,12,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+ ARK3116_SND(serial,13,0xFE,0x40,0x0000,0x0004);
+
+ /* 14 */
+ ARK3116_RCV(serial,14,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+ ARK3116_SND(serial,15,0xFE,0x40,0x0000,0x0004);
+
+ /* 16 */
+ ARK3116_RCV(serial,16,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+ /* --> seq17 */
+ ARK3116_SND(serial,17,0xFE,0x40,0x0001,0x0004);
+
+ /* <-- seq18 */
+ ARK3116_RCV(serial,18,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
+
+ /* --> seq19 */
+ ARK3116_SND(serial,19,0xFE,0x40,0x0003,0x0004);
+
+
+ /* <-- seq20 */
+ /* seems like serial port status info (RTS, CTS,...) */
+ /* returns modem control line status ?! */
+ ARK3116_RCV(serial,20,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
+
+ /* set 9600 baud & do some init ?! */
+ ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
+ ARK3116_SND(serial,148,0xFE,0x40,0x0038,0x0000);
+ ARK3116_SND(serial,149,0xFE,0x40,0x0001,0x0001);
+ ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
+ ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
+ ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
+ ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
+ ARK3116_SND(serial,154,0xFE,0x40,0x0003,0x0003);
+
+ kfree(buf);
+ return(0);
+
+cleanup:
+ for (--i; i>=0; --i)
+ usb_set_serial_port_data(serial->port[i], NULL);
+ return -ENOMEM;
+}
+
+static void ark3116_set_termios(struct usb_serial_port *port,
+ struct termios *old_termios)
+{
+ struct usb_serial *serial = port->serial;
+ struct ark3116_private *priv = usb_get_serial_port_data(port);
+ unsigned int cflag = port->tty->termios->c_cflag;
+ unsigned long flags;
+ int baud;
+ int ark3116_baud;
+ char *buf;
+ char config;
+
+ config = 0;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if ((!port->tty) || (!port->tty->termios)) {
+ dbg("%s - no tty structures", __FUNCTION__);
+ return;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (!priv->termios_initialized) {
+ *(port->tty->termios) = tty_std_termios;
+ port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ priv->termios_initialized = 1;
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ cflag = port->tty->termios->c_cflag;
+
+ /* check that they really want us to change something: */
+ if (old_termios) {
+ if ((cflag == old_termios->c_cflag) &&
+ (RELEVANT_IFLAG(port->tty->termios->c_iflag) ==
+ RELEVANT_IFLAG(old_termios->c_iflag))) {
+ dbg("%s - nothing to change...", __FUNCTION__);
+ return;
+ }
+ }
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf) {
+ dbg("error kmalloc");
+ return;
+ }
+
+ /* set data bit count (8/7/6/5) */
+ if (cflag & CSIZE){
+ switch (cflag & CSIZE){
+ case CS5:
+ config |= 0x00;
+ dbg("setting CS5");
+ break;
+ case CS6:
+ config |= 0x01;
+ dbg("setting CS6");
+ break;
+ case CS7:
+ config |= 0x02;
+ dbg("setting CS7");
+ break;
+ default:
+ err ("CSIZE was set but not CS5-CS8, using CS8!");
+ case CS8:
+ config |= 0x03;
+ dbg("setting CS8");
+ break;
+ }
+ }
+
+ /* set parity (NONE,EVEN,ODD) */
+ if (cflag & PARENB){
+ if (cflag & PARODD) {
+ config |= 0x08;
+ dbg("setting parity to ODD");
+ } else {
+ config |= 0x18;
+ dbg("setting parity to EVEN");
+ }
+ } else {
+ dbg("setting parity to NONE");
+ }
+
+ /* SET STOPBIT (1/2) */
+ if (cflag & CSTOPB) {
+ config |= 0x04;
+ dbg ("setting 2 stop bits");
+ } else {
+ dbg ("setting 1 stop bit");
+ }
+
+
+ /* set baudrate: */
+ baud = 0;
+ switch (cflag & CBAUD){
+ case B0:
+ err("can't set 0baud, using 9600 instead");
+ break;
+ case B75: baud = 75; break;
+ case B150: baud = 150; break;
+ case B300: baud = 300; break;
+ case B600: baud = 600; break;
+ case B1200: baud = 1200; break;
+ case B1800: baud = 1800; break;
+ case B2400: baud = 2400; break;
+ case B4800: baud = 4800; break;
+ case B9600: baud = 9600; break;
+ case B19200: baud = 19200; break;
+ case B38400: baud = 38400; break;
+ case B57600: baud = 57600; break;
+ case B115200: baud = 115200; break;
+ case B230400: baud = 230400; break;
+ case B460800: baud = 460800; break;
+ default:
+ dbg("does not support the baudrate requested (fix it)");
+ break;
+ }
+
+ /* set 9600 as default (if given baudrate is invalid for example) */
+ if (baud == 0)
+ baud = 9600;
+
+ /*
+ * found by try'n'error, be careful, maybe there are other options
+ * for multiplicator etc!
+ */
+ if (baud == 460800)
+ /* strange, for 460800 the formula is wrong
+ * (dont use round(), then 9600baud is wrong) */
+ ark3116_baud = 7;
+ else
+ ark3116_baud = 3000000 / baud;
+
+ /* ? */
+ ARK3116_RCV(serial,0,0xFE,0xC0,0x0000,0x0003, 0x03, buf);
+ /* offset = buf[0]; */
+ /* offset = 0x03; */
+ /* dbg("using 0x%04X as target for 0x0003:",0x0080+offset); */
+
+
+ /* set baudrate */
+ dbg("setting baudrate to %d (->reg=%d)",baud,ark3116_baud);
+ ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
+ ARK3116_SND(serial,148,0xFE,0x40,(ark3116_baud & 0x00FF) ,0x0000);
+ ARK3116_SND(serial,149,0xFE,0x40,(ark3116_baud & 0xFF00)>>8,0x0001);
+ ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
+
+ /* ? */
+ ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
+ ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
+
+ /* set data bit count, stop bit count & parity: */
+ dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config);
+ ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
+ ARK3116_SND(serial,154,0xFE,0x40,config,0x0003);
+
+ if (cflag & CRTSCTS)
+ dbg("CRTSCTS not supported by chipset ?!");
+
+ /* TEST ARK3116_SND(154,0xFE,0x40,0xFFFF, 0x0006); */
+
+ kfree(buf);
+ return;
+}
+
+static int ark3116_open(struct usb_serial_port *port, struct file *filp)
+{
+ struct termios tmp_termios;
+ struct usb_serial *serial = port->serial;
+ char *buf;
+ int result = 0;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf) {
+ dbg("error kmalloc -> out of mem ?");
+ return -ENOMEM;
+ }
+
+ result = usb_serial_generic_open(port, filp);
+ if (result)
+ return result;
+
+ /* open */
+ ARK3116_RCV(serial,111,0xFE,0xC0,0x0000,0x0003, 0x02, buf);
+
+ ARK3116_SND(serial,112,0xFE,0x40,0x0082,0x0003);
+ ARK3116_SND(serial,113,0xFE,0x40,0x001A,0x0000);
+ ARK3116_SND(serial,114,0xFE,0x40,0x0000,0x0001);
+ ARK3116_SND(serial,115,0xFE,0x40,0x0002,0x0003);
+
+ ARK3116_RCV(serial,116,0xFE,0xC0,0x0000,0x0004, 0x03, buf);
+ ARK3116_SND(serial,117,0xFE,0x40,0x0002,0x0004);
+
+ ARK3116_RCV(serial,118,0xFE,0xC0,0x0000,0x0004, 0x02, buf);
+ ARK3116_SND(serial,119,0xFE,0x40,0x0000,0x0004);
+
+ ARK3116_RCV(serial,120,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+
+ ARK3116_SND(serial,121,0xFE,0x40,0x0001,0x0004);
+
+ ARK3116_RCV(serial,122,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
+
+ ARK3116_SND(serial,123,0xFE,0x40,0x0003,0x0004);
+
+ /* returns different values (control lines ?!) */
+ ARK3116_RCV(serial,124,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
+
+ /* initialise termios: */
+ if (port->tty)
+ ark3116_set_termios(port, &tmp_termios);
+
+ kfree(buf);
+
+ return result;
+
+}
+
+static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ dbg("ioctl not supported yet...");
+ return -ENOIOCTLCMD;
+}
+
+static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
+{
+ struct usb_serial *serial = port->serial;
+ char *buf;
+ char temp;
+
+ /* seems like serial port status info (RTS, CTS,...) is stored
+ * in reg(?) 0x0006
+ * pcb connection point 11 = GND -> sets bit4 of response
+ * pcb connection point 7 = GND -> sets bit6 of response
+ */
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf) {
+ dbg("error kmalloc");
+ return -ENOMEM;
+ }
+
+ /* read register: */
+ ARK3116_RCV_QUIET(serial,0xFE,0xC0,0x0000,0x0006,buf);
+ temp = buf[0];
+ kfree(buf);
+
+ /* i do not really know if bit4=CTS and bit6=DSR... was just a
+ * quick guess !!
+ */
+ return (temp & (1<<4) ? TIOCM_CTS : 0) |
+ (temp & (1<<6) ? TIOCM_DSR : 0);
+}
+
+static struct usb_driver ark3116_driver = {
+ .name = "ark3116",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+};
+
+static struct usb_serial_driver ark3116_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ark3116",
+ },
+ .id_table = id_table,
+ .num_interrupt_in = 1,
+ .num_bulk_in = 1,
+ .num_bulk_out = 1,
+ .num_ports = 1,
+ .attach = ark3116_attach,
+ .set_termios = ark3116_set_termios,
+ .ioctl = ark3116_ioctl,
+ .tiocmget = ark3116_tiocmget,
+ .open = ark3116_open,
+};
+
+static int __init ark3116_init(void)
+{
+ int retval;
+
+ retval = usb_serial_register(&ark3116_device);
+ if (retval)
+ return retval;
+ retval = usb_register(&ark3116_driver);
+ if (retval)
+ usb_serial_deregister(&ark3116_device);
+ return retval;
+}
+
+static void __exit ark3116_exit(void)
+{
+ usb_deregister(&ark3116_driver);
+ usb_serial_deregister(&ark3116_device);
+}
+
+module_init(ark3116_init);
+module_exit(ark3116_exit);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 82151207d81..986d7622273 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -307,6 +307,7 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
static struct usb_device_id id_table_combined [] = {
+ { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
@@ -498,6 +499,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
{ USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 2c55a5ea9c9..d69a917e768 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -32,6 +32,10 @@
#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
+/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
+#define FTDI_ACTZWAVE_PID 0xF2D0
+
+
/* www.irtrans.de device */
#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
@@ -426,6 +430,11 @@
#define PAPOUCH_VID 0x5050 /* Vendor ID */
#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
+/*
+ * ACG Identification Technologies GmbH products (http://www.acg.de/).
+ * Submitted by anton -at- goto10 -dot- org.
+ */
+#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 476cda107f4..c62cc287651 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -138,6 +138,7 @@ int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp)
return result;
}
+EXPORT_SYMBOL_GPL(usb_serial_generic_open);
static void generic_cleanup (struct usb_serial_port *port)
{
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 4d40704dea2..238033a8709 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -257,14 +257,14 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf
return (0);
}
- spin_lock(&port->lock);
- if (port->write_urb_busy) {
- spin_unlock(&port->lock);
+ spin_lock(&wport->lock);
+ if (wport->write_urb_busy) {
+ spin_unlock(&wport->lock);
dbg("%s - already writing", __FUNCTION__);
return 0;
}
- port->write_urb_busy = 1;
- spin_unlock(&port->lock);
+ wport->write_urb_busy = 1;
+ spin_unlock(&wport->lock);
count = (count > OMNINET_BULKOUTSIZE) ? OMNINET_BULKOUTSIZE : count;
@@ -283,7 +283,7 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf
wport->write_urb->dev = serial->dev;
result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
if (result) {
- port->write_urb_busy = 0;
+ wport->write_urb_busy = 0;
err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
} else
result = count;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 071f86a59c0..9c36f0ece20 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -189,11 +189,15 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
portNumber = tty->index - serial->minor;
port = serial->port[portNumber];
- if (!port)
- return -ENODEV;
+ if (!port) {
+ retval = -ENODEV;
+ goto bailout_kref_put;
+ }
- if (mutex_lock_interruptible(&port->mutex))
- return -ERESTARTSYS;
+ if (mutex_lock_interruptible(&port->mutex)) {
+ retval = -ERESTARTSYS;
+ goto bailout_kref_put;
+ }
++port->open_count;
@@ -209,7 +213,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
* safe because we are called with BKL held */
if (!try_module_get(serial->type->driver.owner)) {
retval = -ENODEV;
- goto bailout_kref_put;
+ goto bailout_mutex_unlock;
}
/* only call the device specific open if this
@@ -224,10 +228,11 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
bailout_module_put:
module_put(serial->type->driver.owner);
-bailout_kref_put:
- kref_put(&serial->kref, destroy_serial);
+bailout_mutex_unlock:
port->open_count = 0;
mutex_unlock(&port->mutex);
+bailout_kref_put:
+ kref_put(&serial->kref, destroy_serial);
return retval;
}
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index 334b1db1bd7..27597c576ef 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -29,12 +29,15 @@ static ssize_t backlight_show_power(struct class_device *cdev, char *buf)
static ssize_t backlight_store_power(struct class_device *cdev, const char *buf, size_t count)
{
- int rc = -ENXIO, power;
+ int rc = -ENXIO;
char *endp;
struct backlight_device *bd = to_backlight_device(cdev);
+ int power = simple_strtoul(buf, &endp, 0);
+ size_t size = endp - buf;
- power = simple_strtoul(buf, &endp, 0);
- if (*endp && !isspace(*endp))
+ if (*endp && isspace(*endp))
+ size++;
+ if (size != count)
return -EINVAL;
down(&bd->sem);
@@ -65,12 +68,15 @@ static ssize_t backlight_show_brightness(struct class_device *cdev, char *buf)
static ssize_t backlight_store_brightness(struct class_device *cdev, const char *buf, size_t count)
{
- int rc = -ENXIO, brightness;
+ int rc = -ENXIO;
char *endp;
struct backlight_device *bd = to_backlight_device(cdev);
+ int brightness = simple_strtoul(buf, &endp, 0);
+ size_t size = endp - buf;
- brightness = simple_strtoul(buf, &endp, 0);
- if (*endp && !isspace(*endp))
+ if (*endp && isspace(*endp))
+ size++;
+ if (size != count)
return -EINVAL;
down(&bd->sem);
diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c
index 86908a60c63..bc8ab005a3f 100644
--- a/drivers/video/backlight/lcd.c
+++ b/drivers/video/backlight/lcd.c
@@ -31,12 +31,15 @@ static ssize_t lcd_show_power(struct class_device *cdev, char *buf)
static ssize_t lcd_store_power(struct class_device *cdev, const char *buf, size_t count)
{
- int rc, power;
+ int rc = -ENXIO;
char *endp;
struct lcd_device *ld = to_lcd_device(cdev);
+ int power = simple_strtoul(buf, &endp, 0);
+ size_t size = endp - buf;
- power = simple_strtoul(buf, &endp, 0);
- if (*endp && !isspace(*endp))
+ if (*endp && isspace(*endp))
+ size++;
+ if (size != count)
return -EINVAL;
down(&ld->sem);
@@ -44,8 +47,7 @@ static ssize_t lcd_store_power(struct class_device *cdev, const char *buf, size_
pr_debug("lcd: set power to %d\n", power);
ld->props->set_power(ld, power);
rc = count;
- } else
- rc = -ENXIO;
+ }
up(&ld->sem);
return rc;
@@ -53,14 +55,12 @@ static ssize_t lcd_store_power(struct class_device *cdev, const char *buf, size_
static ssize_t lcd_show_contrast(struct class_device *cdev, char *buf)
{
- int rc;
+ int rc = -ENXIO;
struct lcd_device *ld = to_lcd_device(cdev);
down(&ld->sem);
if (likely(ld->props && ld->props->get_contrast))
rc = sprintf(buf, "%d\n", ld->props->get_contrast(ld));
- else
- rc = -ENXIO;
up(&ld->sem);
return rc;
@@ -68,12 +68,15 @@ static ssize_t lcd_show_contrast(struct class_device *cdev, char *buf)
static ssize_t lcd_store_contrast(struct class_device *cdev, const char *buf, size_t count)
{
- int rc, contrast;
+ int rc = -ENXIO;
char *endp;
struct lcd_device *ld = to_lcd_device(cdev);
+ int contrast = simple_strtoul(buf, &endp, 0);
+ size_t size = endp - buf;
- contrast = simple_strtoul(buf, &endp, 0);
- if (*endp && !isspace(*endp))
+ if (*endp && isspace(*endp))
+ size++;
+ if (size != count)
return -EINVAL;
down(&ld->sem);
@@ -81,8 +84,7 @@ static ssize_t lcd_store_contrast(struct class_device *cdev, const char *buf, si
pr_debug("lcd: set contrast to %d\n", contrast);
ld->props->set_contrast(ld, contrast);
rc = count;
- } else
- rc = -ENXIO;
+ }
up(&ld->sem);
return rc;
@@ -90,14 +92,12 @@ static ssize_t lcd_store_contrast(struct class_device *cdev, const char *buf, si
static ssize_t lcd_show_max_contrast(struct class_device *cdev, char *buf)
{
- int rc;
+ int rc = -ENXIO;
struct lcd_device *ld = to_lcd_device(cdev);
down(&ld->sem);
if (likely(ld->props))
rc = sprintf(buf, "%d\n", ld->props->max_contrast);
- else
- rc = -ENXIO;
up(&ld->sem);
return rc;
diff --git a/drivers/video/logo/Makefile b/drivers/video/logo/Makefile
index 4ef5cd19609..b985dfad6c6 100644
--- a/drivers/video/logo/Makefile
+++ b/drivers/video/logo/Makefile
@@ -34,7 +34,7 @@ extra-y += $(call logo-cfiles,_clut224,ppm)
extra-y += $(call logo-cfiles,_gray256,pgm)
# Create commands like "pnmtologo -t mono -n logo_mac_mono -o ..."
-quiet_cmd_logo = LOGO $@
+quiet_cmd_logo = LOGO $@
cmd_logo = scripts/pnmtologo \
-t $(patsubst $*_%,%,$(notdir $(basename $<))) \
-n $(notdir $(basename $<)) -o $@ $<