aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorJames Bottomley <James.Bottomley@HansenPartnership.com>2008-01-03 12:17:50 -0600
committerJames Bottomley <James.Bottomley@HansenPartnership.com>2008-02-07 18:02:34 -0600
commitc9e86b8b1da8aea2cad6d3a825791c25ea67624d (patch)
treea7ce4c8a8c1ab32ac6b45686ac1aa99ababc1f67 /drivers
parent3dfcb701e1ff7aa21d6623e46b6ec3f7d0d306e1 (diff)
[SCSI] mca_53c9x: remove driver
This driver depends on the deprecated NCR53C9X core and needs to be converted to the esp_scsi core. Acked-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/scsi/Kconfig11
-rw-r--r--drivers/scsi/Makefile1
-rw-r--r--drivers/scsi/mca_53c9x.c520
3 files changed, 0 insertions, 532 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index fa86f340cbb..21675ae8390 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1263,17 +1263,6 @@ config SCSI_NCR53C8XX_NO_DISCONNECT
not allow targets to disconnect is not reasonable if there is more
than 1 device on a SCSI bus. The normal answer therefore is N.
-config SCSI_MCA_53C9X
- tristate "NCR MCA 53C9x SCSI support"
- depends on MCA_LEGACY && SCSI && BROKEN_ON_SMP
- help
- Some MicroChannel machines, notably the NCR 35xx line, use a SCSI
- controller based on the NCR 53C94. This driver will allow use of
- the controller on the 3550, and very possibly others.
-
- To compile this driver as a module, choose M here: the
- module will be called mca_53c9x.
-
config SCSI_PAS16
tristate "PAS16 SCSI support"
depends on ISA && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 999327dbbed..9c9fa7f5c98 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -95,7 +95,6 @@ obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/
obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o
obj-$(CONFIG_SCSI_EATA_PIO) += eata_pio.o
obj-$(CONFIG_SCSI_7000FASST) += wd7000.o
-obj-$(CONFIG_SCSI_MCA_53C9X) += NCR53C9x.o mca_53c9x.o
obj-$(CONFIG_SCSI_IBMMCA) += ibmmca.o
obj-$(CONFIG_SCSI_EATA) += eata.o
obj-$(CONFIG_SCSI_DC395x) += dc395x.o
diff --git a/drivers/scsi/mca_53c9x.c b/drivers/scsi/mca_53c9x.c
deleted file mode 100644
index d693d0f2139..00000000000
--- a/drivers/scsi/mca_53c9x.c
+++ /dev/null
@@ -1,520 +0,0 @@
-/* mca_53c9x.c: Driver for the SCSI adapter found on NCR 35xx
- * (and maybe some other) Microchannel machines
- *
- * Code taken mostly from Cyberstorm SCSI drivers
- * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk)
- *
- * Hacked to work with the NCR MCA stuff by Tymm Twillman (tymm@computer.org)
- *
- * The CyberStorm SCSI driver (and this driver) is based on David S. Miller's
- * ESP driver * for the Sparc computers.
- *
- * Special thanks to Ken Stewart at Symbios (LSI) for helping with info on
- * the 86C01. I was on the brink of going ga-ga...
- *
- * Also thanks to Jesper Skov for helping me with info on how the Amiga
- * does things...
- */
-
-/*
- * This is currently only set up to use one 53c9x card at a time; it could be
- * changed fairly easily to detect/use more than one, but I'm not too sure how
- * many cards that use the 53c9x on MCA systems there are (if, in fact, there
- * are cards that use them, other than the one built into some NCR systems)...
- * If anyone requests this, I'll throw it in, otherwise it's not worth the
- * effort.
- */
-
-/*
- * Info on the 86C01 MCA interface chip at the bottom, if you care enough to
- * look.
- */
-
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/mca.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/mca-legacy.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "NCR53C9x.h"
-
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mca_dma.h>
-#include <asm/pgtable.h>
-
-/*
- * From ibmmca.c (IBM scsi controller card driver) -- used for turning PS2 disk
- * activity LED on and off
- */
-
-#define PS2_SYS_CTR 0x92
-
-/* Ports the ncr's 53c94 can be put at; indexed by pos register value */
-
-#define MCA_53C9X_IO_PORTS { \
- 0x0000, 0x0240, 0x0340, 0x0400, \
- 0x0420, 0x3240, 0x8240, 0xA240, \
- }
-
-/*
- * Supposedly there were some cards put together with the 'c9x and 86c01. If
- * they have different ID's from the ones on the 3500 series machines,
- * you can add them here and hopefully things will work out.
- */
-
-#define MCA_53C9X_IDS { \
- 0x7F4C, \
- 0x0000, \
- }
-
-static int dma_bytes_sent(struct NCR_ESP *, int);
-static int dma_can_transfer(struct NCR_ESP *, Scsi_Cmnd *);
-static void dma_dump_state(struct NCR_ESP *);
-static void dma_init_read(struct NCR_ESP *, __u32, int);
-static void dma_init_write(struct NCR_ESP *, __u32, int);
-static void dma_ints_off(struct NCR_ESP *);
-static void dma_ints_on(struct NCR_ESP *);
-static int dma_irq_p(struct NCR_ESP *);
-static int dma_ports_p(struct NCR_ESP *);
-static void dma_setup(struct NCR_ESP *, __u32, int, int);
-static void dma_led_on(struct NCR_ESP *);
-static void dma_led_off(struct NCR_ESP *);
-
-/* This is where all commands are put before they are trasfered to the
- * 53c9x via PIO.
- */
-
-static volatile unsigned char cmd_buffer[16];
-
-/*
- * We keep the structure that is used to access the registers on the 53c9x
- * here.
- */
-
-static struct ESP_regs eregs;
-
-/***************************************************************** Detection */
-static int mca_esp_detect(struct scsi_host_template *tpnt)
-{
- struct NCR_ESP *esp;
- static int io_port_by_pos[] = MCA_53C9X_IO_PORTS;
- int mca_53c9x_ids[] = MCA_53C9X_IDS;
- int *id_to_check = mca_53c9x_ids;
- int slot;
- int pos[3];
- unsigned int tmp_io_addr;
- unsigned char tmp_byte;
-
-
- if (!MCA_bus)
- return 0;
-
- while (*id_to_check) {
- if ((slot = mca_find_adapter(*id_to_check, 0)) !=
- MCA_NOTFOUND)
- {
- esp = esp_allocate(tpnt, NULL, 0);
-
- pos[0] = mca_read_stored_pos(slot, 2);
- pos[1] = mca_read_stored_pos(slot, 3);
- pos[2] = mca_read_stored_pos(slot, 4);
-
- esp->eregs = &eregs;
-
- /*
- * IO port base is given in the first (non-ID) pos
- * register, like so:
- *
- * Bits 3 2 1 IO base
- * ----------------------------
- * 0 0 0 <disabled>
- * 0 0 1 0x0240
- * 0 1 0 0x0340
- * 0 1 1 0x0400
- * 1 0 0 0x0420
- * 1 0 1 0x3240
- * 1 1 0 0x8240
- * 1 1 1 0xA240
- */
-
- tmp_io_addr =
- io_port_by_pos[(pos[0] & 0x0E) >> 1];
-
- esp->eregs->io_addr = tmp_io_addr + 0x10;
-
- if (esp->eregs->io_addr == 0x0000) {
- printk("Adapter is disabled.\n");
- break;
- }
-
- /*
- * IRQ is specified in bits 4 and 5:
- *
- * Bits 4 5 IRQ
- * -----------------------
- * 0 0 3
- * 0 1 5
- * 1 0 7
- * 1 1 9
- */
-
- esp->irq = ((pos[0] & 0x30) >> 3) + 3;
-
- /*
- * DMA channel is in the low 3 bits of the second
- * POS register
- */
-
- esp->dma = pos[1] & 7;
- esp->slot = slot;
-
- if (request_irq(esp->irq, esp_intr, 0,
- "NCR 53c9x SCSI", esp->ehost))
- {
- printk("Unable to request IRQ %d.\n", esp->irq);
- esp_deallocate(esp);
- scsi_unregister(esp->ehost);
- return 0;
- }
-
- if (request_dma(esp->dma, "NCR 53c9x SCSI")) {
- printk("Unable to request DMA channel %d.\n",
- esp->dma);
- free_irq(esp->irq, esp_intr);
- esp_deallocate(esp);
- scsi_unregister(esp->ehost);
- return 0;
- }
-
- request_region(tmp_io_addr, 32, "NCR 53c9x SCSI");
-
- /*
- * 86C01 handles DMA, IO mode, from address
- * (base + 0x0a)
- */
-
- mca_disable_dma(esp->dma);
- mca_set_dma_io(esp->dma, tmp_io_addr + 0x0a);
- mca_enable_dma(esp->dma);
-
- /* Tell the 86C01 to give us interrupts */
-
- tmp_byte = inb(tmp_io_addr + 0x02) | 0x40;
- outb(tmp_byte, tmp_io_addr + 0x02);
-
- /*
- * Scsi ID -- general purpose register, hi
- * 2 bits; add 4 to this number to get the
- * ID
- */
-
- esp->scsi_id = ((pos[2] & 0xC0) >> 6) + 4;
-
- /* Do command transfer with programmed I/O */
-
- esp->do_pio_cmds = 1;
-
- /* Required functions */
-
- esp->dma_bytes_sent = &dma_bytes_sent;
- esp->dma_can_transfer = &dma_can_transfer;
- esp->dma_dump_state = &dma_dump_state;
- esp->dma_init_read = &dma_init_read;
- esp->dma_init_write = &dma_init_write;
- esp->dma_ints_off = &dma_ints_off;
- esp->dma_ints_on = &dma_ints_on;
- esp->dma_irq_p = &dma_irq_p;
- esp->dma_ports_p = &dma_ports_p;
- esp->dma_setup = &dma_setup;
-
- /* Optional functions */
-
- esp->dma_barrier = NULL;
- esp->dma_drain = NULL;
- esp->dma_invalidate = NULL;
- esp->dma_irq_entry = NULL;
- esp->dma_irq_exit = NULL;
- esp->dma_led_on = dma_led_on;
- esp->dma_led_off = dma_led_off;
- esp->dma_poll = NULL;
- esp->dma_reset = NULL;
-
- /* Set the command buffer */
-
- esp->esp_command = (volatile unsigned char*)
- cmd_buffer;
- esp->esp_command_dvma = isa_virt_to_bus(cmd_buffer);
-
- /* SCSI chip speed */
-
- esp->cfreq = 25000000;
-
- /* Differential SCSI? I think not. */
-
- esp->diff = 0;
-
- esp_initialize(esp);
-
- printk(" Adapter found in slot %2d: io port 0x%x "
- "irq %d dma channel %d\n", slot + 1, tmp_io_addr,
- esp->irq, esp->dma);
-
- mca_set_adapter_name(slot, "NCR 53C9X SCSI Adapter");
- mca_mark_as_used(slot);
-
- break;
- }
-
- id_to_check++;
- }
-
- return esps_in_use;
-}
-
-
-/******************************************************************* Release */
-
-static int mca_esp_release(struct Scsi_Host *host)
-{
- struct NCR_ESP *esp = (struct NCR_ESP *)host->hostdata;
- unsigned char tmp_byte;
-
- esp_deallocate(esp);
- /*
- * Tell the 86C01 to stop sending interrupts
- */
-
- tmp_byte = inb(esp->eregs->io_addr - 0x0E);
- tmp_byte &= ~0x40;
- outb(tmp_byte, esp->eregs->io_addr - 0x0E);
-
- free_irq(esp->irq, esp_intr);
- free_dma(esp->dma);
-
- mca_mark_as_unused(esp->slot);
-
- return 0;
-}
-
-/************************************************************* DMA Functions */
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
-{
- /* Ask the 53c9x. It knows. */
-
- return fifo_count;
-}
-
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- /*
- * The MCA dma channels can only do up to 128K bytes at a time.
- * (16 bit mode)
- */
-
- unsigned long sz = sp->SCp.this_residual;
- if(sz > 0x20000)
- sz = 0x20000;
- return sz;
-}
-
-static void dma_dump_state(struct NCR_ESP *esp)
-{
- /*
- * Doesn't quite match up to the other drivers, but we do what we
- * can.
- */
-
- ESPLOG(("esp%d: dma channel <%d>\n", esp->esp_id, esp->dma));
- ESPLOG(("bytes left to dma: %d\n", mca_get_dma_residue(esp->dma)));
-}
-
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length)
-{
- unsigned long flags;
-
-
- save_flags(flags);
- cli();
-
- mca_disable_dma(esp->dma);
- mca_set_dma_mode(esp->dma, MCA_DMA_MODE_XFER | MCA_DMA_MODE_16 |
- MCA_DMA_MODE_IO);
- mca_set_dma_addr(esp->dma, addr);
- mca_set_dma_count(esp->dma, length / 2); /* !!! */
- mca_enable_dma(esp->dma);
-
- restore_flags(flags);
-}
-
-static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length)
-{
- unsigned long flags;
-
-
- save_flags(flags);
- cli();
-
- mca_disable_dma(esp->dma);
- mca_set_dma_mode(esp->dma, MCA_DMA_MODE_XFER | MCA_DMA_MODE_WRITE |
- MCA_DMA_MODE_16 | MCA_DMA_MODE_IO);
- mca_set_dma_addr(esp->dma, addr);
- mca_set_dma_count(esp->dma, length / 2); /* !!! */
- mca_enable_dma(esp->dma);
-
- restore_flags(flags);
-}
-
-static void dma_ints_off(struct NCR_ESP *esp)
-{
- /*
- * Tell the 'C01 to shut up. All interrupts are routed through it.
- */
-
- outb(inb(esp->eregs->io_addr - 0x0E) & ~0x40,
- esp->eregs->io_addr - 0x0E);
-}
-
-static void dma_ints_on(struct NCR_ESP *esp)
-{
- /*
- * Ok. You can speak again.
- */
-
- outb(inb(esp->eregs->io_addr - 0x0E) | 0x40,
- esp->eregs->io_addr - 0x0E);
-}
-
-static int dma_irq_p(struct NCR_ESP *esp)
-{
- /*
- * DaveM says that this should return a "yes" if there is an interrupt
- * or a DMA error occurred. I copied the Amiga driver's semantics,
- * though, because it seems to work and we can't really tell if
- * a DMA error happened. This gives the "yes" if the scsi chip
- * is sending an interrupt and no DMA activity is taking place
- */
-
- return (!(inb(esp->eregs->io_addr - 0x04) & 1) &&
- !(inb(esp->eregs->io_addr - 0x04) & 2) );
-}
-
-static int dma_ports_p(struct NCR_ESP *esp)
-{
- /*
- * Check to see if interrupts are enabled on the 'C01 (in case abort
- * is entered multiple times, so we only do the abort once)
- */
-
- return (inb(esp->eregs->io_addr - 0x0E) & 0x40) ? 1:0;
-}
-
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
-{
- if(write){
- dma_init_write(esp, addr, count);
- } else {
- dma_init_read(esp, addr, count);
- }
-}
-
-/*
- * These will not play nicely with other disk controllers that try to use the
- * disk active LED... but what can you do? Don't answer that.
- *
- * Stolen shamelessly from ibmmca.c -- IBM Microchannel SCSI adapter driver
- *
- */
-
-static void dma_led_on(struct NCR_ESP *esp)
-{
- outb(inb(PS2_SYS_CTR) | 0xc0, PS2_SYS_CTR);
-}
-
-static void dma_led_off(struct NCR_ESP *esp)
-{
- outb(inb(PS2_SYS_CTR) & 0x3f, PS2_SYS_CTR);
-}
-
-static struct scsi_host_template driver_template = {
- .proc_name = "mca_53c9x",
- .name = "NCR 53c9x SCSI",
- .detect = mca_esp_detect,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .release = mca_esp_release,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .can_queue = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .unchecked_isa_dma = 1,
- .use_clustering = DISABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
-
-/*
- * OK, here's the goods I promised. The NCR 86C01 is an MCA interface chip
- * that handles enabling/diabling IRQ, dma interfacing, IO port selection
- * and other fun stuff. It takes up 16 addresses, and the chip it is
- * connnected to gets the following 16. Registers are as follows:
- *
- * Offsets 0-1 : Card ID
- *
- * Offset 2 : Mode enable register --
- * Bit 7 : Data Word width (1 = 16, 0 = 8)
- * Bit 6 : IRQ enable (1 = enabled)
- * Bits 5,4 : IRQ select
- * 0 0 : IRQ 3
- * 0 1 : IRQ 5
- * 1 0 : IRQ 7
- * 1 1 : IRQ 9
- * Bits 3-1 : Base Address
- * 0 0 0 : <disabled>
- * 0 0 1 : 0x0240
- * 0 1 0 : 0x0340
- * 0 1 1 : 0x0400
- * 1 0 0 : 0x0420
- * 1 0 1 : 0x3240
- * 1 1 0 : 0x8240
- * 1 1 1 : 0xA240
- * Bit 0 : Card enable (1 = enabled)
- *
- * Offset 3 : DMA control register --
- * Bit 7 : DMA enable (1 = enabled)
- * Bits 6,5 : Preemt Count Select (transfers to complete after
- * 'C01 has been preempted on MCA bus)
- * 0 0 : 0
- * 0 1 : 1
- * 1 0 : 3
- * 1 1 : 7
- * (all these wacky numbers; I'm sure there's a reason somewhere)
- * Bit 4 : Fairness enable (1 = fair bus priority)
- * Bits 3-0 : Arbitration level (0-15 consecutive)
- *
- * Offset 4 : General purpose register
- * Bits 7-3 : User definable (here, 7,6 are SCSI ID)
- * Bits 2-0 : reserved
- *
- * Offset 10 : DMA decode register (used for IO based DMA; also can do
- * PIO through this port)
- *
- * Offset 12 : Status
- * Bits 7-2 : reserved
- * Bit 1 : DMA pending (1 = pending)
- * Bit 0 : IRQ pending (0 = pending)
- *
- * Exciting, huh?
- *
- */