aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorHåvard Skinnemoen <haavard.skinnemoen@atmel.com>2008-06-06 18:04:52 +0200
committerDavid Woodhouse <dwmw2@infradead.org>2008-06-07 08:42:51 +0100
commitd4f4c0aa8e36f69e46360b3d3569dc15d6099894 (patch)
tree758e0bcfe4be735048edcd87929beefd30c39658 /drivers
parent62fd71fe710886ba449e932ad7877f4a8340c2d4 (diff)
[MTD] [NAND] rename at91_nand -> atmel_nand: file names and Kconfig
The AT91 NAND driver needs just a few tiny modifications to work on AVR32 as well. Rename it atmel_nand to reflect this. Also move the ECC register definitions into drivers/mtd/nand since they are only useful to the atmel_nand driver, and get rid of the useless filename at the top of each file. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/nand/Kconfig17
-rw-r--r--drivers/mtd/nand/Makefile2
-rw-r--r--drivers/mtd/nand/atmel_nand.c (renamed from drivers/mtd/nand/at91_nand.c)10
-rw-r--r--drivers/mtd/nand/atmel_nand_ecc.h36
4 files changed, 50 insertions, 15 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 7dea6c3a660..cdd2952c153 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -271,7 +271,7 @@ config MTD_NAND_CS553X
If you say "m", the module will be called "cs553x_nand.ko".
-config MTD_NAND_AT91
+config MTD_NAND_ATMEL
bool "Support for NAND Flash / SmartMedia on AT91"
depends on ARCH_AT91
help
@@ -279,14 +279,15 @@ config MTD_NAND_AT91
on Atmel AT91 processors.
choice
prompt "ECC management for NAND Flash / SmartMedia on AT91"
- depends on MTD_NAND_AT91
+ depends on MTD_NAND_ATMEL
-config MTD_NAND_AT91_ECC_HW
+config MTD_NAND_ATMEL_ECC_HW
bool "Hardware ECC"
depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260
help
- Uses hardware ECC provided by the at91sam9260/at91sam9263 chip
- instead of software ECC.
+ Use hardware ECC instead of software ECC when the chip
+ supports it.
+
The hardware ECC controller is capable of single bit error
correction and 2-bit random detection per page.
@@ -296,16 +297,16 @@ config MTD_NAND_AT91_ECC_HW
If unsure, say Y
-config MTD_NAND_AT91_ECC_SOFT
+config MTD_NAND_ATMEL_ECC_SOFT
bool "Software ECC"
help
- Uses software ECC.
+ Use software ECC.
NB : hardware and software ECC schemes are incompatible.
If you switch from one to another, you'll have to erase your
mtd partition.
-config MTD_NAND_AT91_ECC_NONE
+config MTD_NAND_ATMEL_ECC_NONE
bool "No ECC (testing only, DANGEROUS)"
depends on DEBUG_KERNEL
help
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index d95a10c5186..d772581de57 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_MTD_NAND_TS7250) += ts7250.o
obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o
obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
-obj-$(CONFIG_MTD_NAND_AT91) += at91_nand.o
+obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o
obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
diff --git a/drivers/mtd/nand/at91_nand.c b/drivers/mtd/nand/atmel_nand.c
index 2dcaeeae206..51b703155db 100644
--- a/drivers/mtd/nand/at91_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1,6 +1,4 @@
/*
- * drivers/mtd/nand/at91_nand.c
- *
* Copyright (C) 2003 Rick Bronson
*
* Derived from drivers/mtd/nand/autcpu12.c
@@ -36,13 +34,13 @@
#include <asm/arch/board.h>
-#ifdef CONFIG_MTD_NAND_AT91_ECC_HW
+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
#define hard_ecc 1
#else
#define hard_ecc 0
#endif
-#ifdef CONFIG_MTD_NAND_AT91_ECC_NONE
+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE
#define no_ecc 1
#else
#define no_ecc 0
@@ -54,7 +52,7 @@
#define ecc_writel(add, reg, value) \
__raw_writel((value), add + AT91_ECC_##reg)
-#include <asm/arch/at91_ecc.h> /* AT91SAM9260/3 ECC registers */
+#include "atmel_nand_ecc.h" /* Hardware ECC registers */
/* oob layout for large page size
* bad block info is on bytes 0 and 1
@@ -588,5 +586,5 @@ module_exit(at91_nand_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Rick Bronson");
-MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200 / AT91SAM9");
+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91 / AVR32");
MODULE_ALIAS("platform:at91_nand");
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
new file mode 100644
index 00000000000..170db869aac
--- /dev/null
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -0,0 +1,36 @@
+/*
+ * Error Corrected Code Controller (ECC) - System peripherals regsters.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef ATMEL_NAND_ECC_H
+#define ATMEL_NAND_ECC_H
+
+#define AT91_ECC_CR 0x00 /* Control register */
+#define AT91_ECC_RST (1 << 0) /* Reset parity */
+
+#define AT91_ECC_MR 0x04 /* Mode register */
+#define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */
+#define AT91_ECC_PAGESIZE_528 (0)
+#define AT91_ECC_PAGESIZE_1056 (1)
+#define AT91_ECC_PAGESIZE_2112 (2)
+#define AT91_ECC_PAGESIZE_4224 (3)
+
+#define AT91_ECC_SR 0x08 /* Status register */
+#define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */
+#define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
+#define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */
+
+#define AT91_ECC_PR 0x0c /* Parity register */
+#define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */
+#define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
+
+#define AT91_ECC_NPR 0x10 /* NParity register */
+#define AT91_ECC_NPARITY (0xffff << 0) /* NParity */
+
+#endif