Merge branch 'for-2.6.33' into for-2.6.34

1 files changed, 673 insertions, 0 deletions

diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
new file mode 100644
index 00000000000..bf1c5be1f5b
--- /dev/null
+++ b/include/linux/i2c/twl.h
@@ -0,0 +1,673 @@
+/*
+ * twl4030.h - header for TWL4030 PM and audio CODEC device
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * Based on tlv320aic23.c:
+ * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef __TWL_H_
+#define __TWL_H_
+
+#include <linux/types.h>
+#include <linux/input/matrix_keypad.h>
+
+/*
+ * Using the twl4030 core we address registers using a pair
+ *	{ module id, relative register offset }
+ * which that core then maps to the relevant
+ *	{ i2c slave, absolute register address }
+ *
+ * The module IDs are meaningful only to the twl4030 core code,
+ * which uses them as array indices to look up the first register
+ * address each module uses within a given i2c slave.
+ */
+
+/* Slave 0 (i2c address 0x48) */
+#define TWL4030_MODULE_USB		0x00
+
+/* Slave 1 (i2c address 0x49) */
+#define TWL4030_MODULE_AUDIO_VOICE	0x01
+#define TWL4030_MODULE_GPIO		0x02
+#define TWL4030_MODULE_INTBR		0x03
+#define TWL4030_MODULE_PIH		0x04
+#define TWL4030_MODULE_TEST		0x05
+
+/* Slave 2 (i2c address 0x4a) */
+#define TWL4030_MODULE_KEYPAD		0x06
+#define TWL4030_MODULE_MADC		0x07
+#define TWL4030_MODULE_INTERRUPTS	0x08
+#define TWL4030_MODULE_LED		0x09
+#define TWL4030_MODULE_MAIN_CHARGE	0x0A
+#define TWL4030_MODULE_PRECHARGE	0x0B
+#define TWL4030_MODULE_PWM0		0x0C
+#define TWL4030_MODULE_PWM1		0x0D
+#define TWL4030_MODULE_PWMA		0x0E
+#define TWL4030_MODULE_PWMB		0x0F
+
+#define TWL5031_MODULE_ACCESSORY	0x10
+#define TWL5031_MODULE_INTERRUPTS	0x11
+
+/* Slave 3 (i2c address 0x4b) */
+#define TWL4030_MODULE_BACKUP		0x12
+#define TWL4030_MODULE_INT		0x13
+#define TWL4030_MODULE_PM_MASTER	0x14
+#define TWL4030_MODULE_PM_RECEIVER	0x15
+#define TWL4030_MODULE_RTC		0x16
+#define TWL4030_MODULE_SECURED_REG	0x17
+
+#define TWL_MODULE_USB		TWL4030_MODULE_USB
+#define TWL_MODULE_AUDIO_VOICE	TWL4030_MODULE_AUDIO_VOICE
+#define TWL_MODULE_PIH		TWL4030_MODULE_PIH
+#define TWL_MODULE_MADC		TWL4030_MODULE_MADC
+#define TWL_MODULE_MAIN_CHARGE	TWL4030_MODULE_MAIN_CHARGE
+#define TWL_MODULE_PM_MASTER	TWL4030_MODULE_PM_MASTER
+#define TWL_MODULE_PM_RECEIVER	TWL4030_MODULE_PM_RECEIVER
+#define TWL_MODULE_RTC		TWL4030_MODULE_RTC
+
+#define GPIO_INTR_OFFSET	0
+#define KEYPAD_INTR_OFFSET	1
+#define BCI_INTR_OFFSET		2
+#define MADC_INTR_OFFSET	3
+#define USB_INTR_OFFSET		4
+#define BCI_PRES_INTR_OFFSET	9
+#define USB_PRES_INTR_OFFSET	10
+#define RTC_INTR_OFFSET		11
+
+/*
+ * Offset from TWL6030_IRQ_BASE / pdata->irq_base
+ */
+#define PWR_INTR_OFFSET		0
+#define HOTDIE_INTR_OFFSET	12
+#define SMPSLDO_INTR_OFFSET	13
+#define BATDETECT_INTR_OFFSET	14
+#define SIMDETECT_INTR_OFFSET	15
+#define MMCDETECT_INTR_OFFSET	16
+#define GASGAUGE_INTR_OFFSET	17
+#define USBOTG_INTR_OFFSET	4
+#define CHARGER_INTR_OFFSET	2
+#define RSV_INTR_OFFSET		0
+
+/* INT register offsets */
+#define REG_INT_STS_A			0x00
+#define REG_INT_STS_B			0x01
+#define REG_INT_STS_C			0x02
+
+#define REG_INT_MSK_LINE_A		0x03
+#define REG_INT_MSK_LINE_B		0x04
+#define REG_INT_MSK_LINE_C		0x05
+
+#define REG_INT_MSK_STS_A		0x06
+#define REG_INT_MSK_STS_B		0x07
+#define REG_INT_MSK_STS_C		0x08
+
+/* MASK INT REG GROUP A */
+#define TWL6030_PWR_INT_MASK 		0x07
+#define TWL6030_RTC_INT_MASK 		0x18
+#define TWL6030_HOTDIE_INT_MASK 	0x20
+#define TWL6030_SMPSLDOA_INT_MASK	0xC0
+
+/* MASK INT REG GROUP B */
+#define TWL6030_SMPSLDOB_INT_MASK 	0x01
+#define TWL6030_BATDETECT_INT_MASK 	0x02
+#define TWL6030_SIMDETECT_INT_MASK 	0x04
+#define TWL6030_MMCDETECT_INT_MASK 	0x08
+#define TWL6030_GPADC_INT_MASK 		0x60
+#define TWL6030_GASGAUGE_INT_MASK 	0x80
+
+/* MASK INT REG GROUP C */
+#define TWL6030_USBOTG_INT_MASK  	0x0F
+#define TWL6030_CHARGER_CTRL_INT_MASK 	0x10
+#define TWL6030_CHARGER_FAULT_INT_MASK 	0x60
+
+
+#define TWL4030_CLASS_ID 		0x4030
+#define TWL6030_CLASS_ID 		0x6030
+unsigned int twl_rev(void);
+#define GET_TWL_REV (twl_rev())
+#define TWL_CLASS_IS(class, id)			\
+static inline int twl_class_is_ ##class(void)	\
+{						\
+	return ((id) == (GET_TWL_REV)) ? 1 : 0;	\
+}
+
+TWL_CLASS_IS(4030, TWL4030_CLASS_ID)
+TWL_CLASS_IS(6030, TWL6030_CLASS_ID)
+
+/*
+ * Read and write single 8-bit registers
+ */
+int twl_i2c_write_u8(u8 mod_no, u8 val, u8 reg);
+int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg);
+
+/*
+ * Read and write several 8-bit registers at once.
+ *
+ * IMPORTANT:  For twl_i2c_write(), allocate num_bytes + 1
+ * for the value, and populate your data starting at offset 1.
+ */
+int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
+int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
+
+int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
+int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * NOTE:  at up to 1024 registers, this is a big chip.
+ *
+ * Avoid putting register declarations in this file, instead of into
+ * a driver-private file, unless some of the registers in a block
+ * need to be shared with other drivers.  One example is blocks that
+ * have Secondary IRQ Handler (SIH) registers.
+ */
+
+#define TWL4030_SIH_CTRL_EXCLEN_MASK	BIT(0)
+#define TWL4030_SIH_CTRL_PENDDIS_MASK	BIT(1)
+#define TWL4030_SIH_CTRL_COR_MASK	BIT(2)
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * GPIO Block Register offsets (use TWL4030_MODULE_GPIO)
+ */
+
+#define REG_GPIODATAIN1			0x0
+#define REG_GPIODATAIN2			0x1
+#define REG_GPIODATAIN3			0x2
+#define REG_GPIODATADIR1		0x3
+#define REG_GPIODATADIR2		0x4
+#define REG_GPIODATADIR3		0x5
+#define REG_GPIODATAOUT1		0x6
+#define REG_GPIODATAOUT2		0x7
+#define REG_GPIODATAOUT3		0x8
+#define REG_CLEARGPIODATAOUT1		0x9
+#define REG_CLEARGPIODATAOUT2		0xA
+#define REG_CLEARGPIODATAOUT3		0xB
+#define REG_SETGPIODATAOUT1		0xC
+#define REG_SETGPIODATAOUT2		0xD
+#define REG_SETGPIODATAOUT3		0xE
+#define REG_GPIO_DEBEN1			0xF
+#define REG_GPIO_DEBEN2			0x10
+#define REG_GPIO_DEBEN3			0x11
+#define REG_GPIO_CTRL			0x12
+#define REG_GPIOPUPDCTR1		0x13
+#define REG_GPIOPUPDCTR2		0x14
+#define REG_GPIOPUPDCTR3		0x15
+#define REG_GPIOPUPDCTR4		0x16
+#define REG_GPIOPUPDCTR5		0x17
+#define REG_GPIO_ISR1A			0x19
+#define REG_GPIO_ISR2A			0x1A
+#define REG_GPIO_ISR3A			0x1B
+#define REG_GPIO_IMR1A			0x1C
+#define REG_GPIO_IMR2A			0x1D
+#define REG_GPIO_IMR3A			0x1E
+#define REG_GPIO_ISR1B			0x1F
+#define REG_GPIO_ISR2B			0x20
+#define REG_GPIO_ISR3B			0x21
+#define REG_GPIO_IMR1B			0x22
+#define REG_GPIO_IMR2B			0x23
+#define REG_GPIO_IMR3B			0x24
+#define REG_GPIO_EDR1			0x28
+#define REG_GPIO_EDR2			0x29
+#define REG_GPIO_EDR3			0x2A
+#define REG_GPIO_EDR4			0x2B
+#define REG_GPIO_EDR5			0x2C
+#define REG_GPIO_SIH_CTRL		0x2D
+
+/* Up to 18 signals are available as GPIOs, when their
+ * pins are not assigned to another use (such as ULPI/USB).
+ */
+#define TWL4030_GPIO_MAX		18
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Keypad register offsets (use TWL4030_MODULE_KEYPAD)
+ * ... SIH/interrupt only
+ */
+
+#define TWL4030_KEYPAD_KEYP_ISR1	0x11
+#define TWL4030_KEYPAD_KEYP_IMR1	0x12
+#define TWL4030_KEYPAD_KEYP_ISR2	0x13
+#define TWL4030_KEYPAD_KEYP_IMR2	0x14
+#define TWL4030_KEYPAD_KEYP_SIR		0x15	/* test register */
+#define TWL4030_KEYPAD_KEYP_EDR		0x16
+#define TWL4030_KEYPAD_KEYP_SIH_CTRL	0x17
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Multichannel ADC register offsets (use TWL4030_MODULE_MADC)
+ * ... SIH/interrupt only
+ */
+
+#define TWL4030_MADC_ISR1		0x61
+#define TWL4030_MADC_IMR1		0x62
+#define TWL4030_MADC_ISR2		0x63
+#define TWL4030_MADC_IMR2		0x64
+#define TWL4030_MADC_SIR		0x65	/* test register */
+#define TWL4030_MADC_EDR		0x66
+#define TWL4030_MADC_SIH_CTRL		0x67
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Battery charger register offsets (use TWL4030_MODULE_INTERRUPTS)
+ */
+
+#define TWL4030_INTERRUPTS_BCIISR1A	0x0
+#define TWL4030_INTERRUPTS_BCIISR2A	0x1
+#define TWL4030_INTERRUPTS_BCIIMR1A	0x2
+#define TWL4030_INTERRUPTS_BCIIMR2A	0x3
+#define TWL4030_INTERRUPTS_BCIISR1B	0x4
+#define TWL4030_INTERRUPTS_BCIISR2B	0x5
+#define TWL4030_INTERRUPTS_BCIIMR1B	0x6
+#define TWL4030_INTERRUPTS_BCIIMR2B	0x7
+#define TWL4030_INTERRUPTS_BCISIR1	0x8	/* test register */
+#define TWL4030_INTERRUPTS_BCISIR2	0x9	/* test register */
+#define TWL4030_INTERRUPTS_BCIEDR1	0xa
+#define TWL4030_INTERRUPTS_BCIEDR2	0xb
+#define TWL4030_INTERRUPTS_BCIEDR3	0xc
+#define TWL4030_INTERRUPTS_BCISIHCTRL	0xd
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Power Interrupt block register offsets (use TWL4030_MODULE_INT)
+ */
+
+#define TWL4030_INT_PWR_ISR1		0x0
+#define TWL4030_INT_PWR_IMR1		0x1
+#define TWL4030_INT_PWR_ISR2		0x2
+#define TWL4030_INT_PWR_IMR2		0x3
+#define TWL4030_INT_PWR_SIR		0x4	/* test register */
+#define TWL4030_INT_PWR_EDR1		0x5
+#define TWL4030_INT_PWR_EDR2		0x6
+#define TWL4030_INT_PWR_SIH_CTRL	0x7
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Accessory Interrupts
+ */
+#define TWL5031_ACIIMR_LSB		0x05
+#define TWL5031_ACIIMR_MSB		0x06
+#define TWL5031_ACIIDR_LSB		0x07
+#define TWL5031_ACIIDR_MSB		0x08
+#define TWL5031_ACCISR1			0x0F
+#define TWL5031_ACCIMR1			0x10
+#define TWL5031_ACCISR2			0x11
+#define TWL5031_ACCIMR2			0x12
+#define TWL5031_ACCSIR			0x13
+#define TWL5031_ACCEDR1			0x14
+#define TWL5031_ACCSIHCTRL		0x15
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Battery Charger Controller
+ */
+
+#define TWL5031_INTERRUPTS_BCIISR1	0x0
+#define TWL5031_INTERRUPTS_BCIIMR1	0x1
+#define TWL5031_INTERRUPTS_BCIISR2	0x2
+#define TWL5031_INTERRUPTS_BCIIMR2	0x3
+#define TWL5031_INTERRUPTS_BCISIR	0x4
+#define TWL5031_INTERRUPTS_BCIEDR1	0x5
+#define TWL5031_INTERRUPTS_BCIEDR2	0x6
+#define TWL5031_INTERRUPTS_BCISIHCTRL	0x7
+
+/*----------------------------------------------------------------------*/
+
+/* Power bus message definitions */
+
+/* The TWL4030/5030 splits its power-management resources (the various
+ * regulators, clock and reset lines) into 3 processor groups - P1, P2 and
+ * P3. These groups can then be configured to transition between sleep, wait-on
+ * and active states by sending messages to the power bus.  See Section 5.4.2
+ * Power Resources of TWL4030 TRM
+ */
+
+/* Processor groups */
+#define DEV_GRP_NULL		0x0
+#define DEV_GRP_P1		0x1	/* P1: all OMAP devices */
+#define DEV_GRP_P2		0x2	/* P2: all Modem devices */
+#define DEV_GRP_P3		0x4	/* P3: all peripheral devices */
+
+/* Resource groups */
+#define RES_GRP_RES		0x0	/* Reserved */
+#define RES_GRP_PP		0x1	/* Power providers */
+#define RES_GRP_RC		0x2	/* Reset and control */
+#define RES_GRP_PP_RC		0x3
+#define RES_GRP_PR		0x4	/* Power references */
+#define RES_GRP_PP_PR		0x5
+#define RES_GRP_RC_PR		0x6
+#define RES_GRP_ALL		0x7	/* All resource groups */
+
+#define RES_TYPE2_R0		0x0
+
+#define RES_TYPE_ALL		0x7
+
+/* Resource states */
+#define RES_STATE_WRST		0xF
+#define RES_STATE_ACTIVE	0xE
+#define RES_STATE_SLEEP		0x8
+#define RES_STATE_OFF		0x0
+
+/* Power resources */
+
+/* Power providers */
+#define RES_VAUX1               1
+#define RES_VAUX2               2
+#define RES_VAUX3               3
+#define RES_VAUX4               4
+#define RES_VMMC1               5
+#define RES_VMMC2               6
+#define RES_VPLL1               7
+#define RES_VPLL2               8
+#define RES_VSIM                9
+#define RES_VDAC                10
+#define RES_VINTANA1            11
+#define RES_VINTANA2            12
+#define RES_VINTDIG             13
+#define RES_VIO                 14
+#define RES_VDD1                15
+#define RES_VDD2                16
+#define RES_VUSB_1V5            17
+#define RES_VUSB_1V8            18
+#define RES_VUSB_3V1            19
+#define RES_VUSBCP              20
+#define RES_REGEN               21
+/* Reset and control */
+#define RES_NRES_PWRON          22
+#define RES_CLKEN               23
+#define RES_SYSEN               24
+#define RES_HFCLKOUT            25
+#define RES_32KCLKOUT           26
+#define RES_RESET               27
+/* Power Reference */
+#define RES_Main_Ref            28
+
+#define TOTAL_RESOURCES		28
+/*
+ * Power Bus Message Format ... these can be sent individually by Linux,
+ * but are usually part of downloaded scripts that are run when various
+ * power events are triggered.
+ *
+ *  Broadcast Message (16 Bits):
+ *    DEV_GRP[15:13] MT[12]  RES_GRP[11:9]  RES_TYPE2[8:7] RES_TYPE[6:4]
+ *    RES_STATE[3:0]
+ *
+ *  Singular Message (16 Bits):
+ *    DEV_GRP[15:13] MT[12]  RES_ID[11:4]  RES_STATE[3:0]
+ */
+
+#define MSG_BROADCAST(devgrp, grp, type, type2, state) \
+	( (devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \
+	| (type) << 4 | (state))
+
+#define MSG_SINGULAR(devgrp, id, state) \
+	((devgrp) << 13 | 0 << 12 | (id) << 4 | (state))
+
+#define MSG_BROADCAST_ALL(devgrp, state) \
+	((devgrp) << 5 | (state))
+
+#define MSG_BROADCAST_REF MSG_BROADCAST_ALL
+#define MSG_BROADCAST_PROV MSG_BROADCAST_ALL
+#define MSG_BROADCAST__CLK_RST MSG_BROADCAST_ALL
+/*----------------------------------------------------------------------*/
+
+struct twl4030_clock_init_data {
+	bool ck32k_lowpwr_enable;
+};
+
+struct twl4030_bci_platform_data {
+	int *battery_tmp_tbl;
+	unsigned int tblsize;
+};
+
+/* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */
+struct twl4030_gpio_platform_data {
+	int		gpio_base;
+	unsigned	irq_base, irq_end;
+
+	/* package the two LED signals as output-only GPIOs? */
+	bool		use_leds;
+
+	/* gpio-n should control VMMC(n+1) if BIT(n) in mmc_cd is set */
+	u8		mmc_cd;
+
+	/* if BIT(N) is set, or VMMC(n+1) is linked, debounce GPIO-N */
+	u32		debounce;
+
+	/* For gpio-N, bit (1 << N) in "pullups" is set if that pullup
+	 * should be enabled.  Else, if that bit is set in "pulldowns",
+	 * that pulldown is enabled.  Don't waste power by letting any
+	 * digital inputs float...
+	 */
+	u32		pullups;
+	u32		pulldowns;
+
+	int		(*setup)(struct device *dev,
+				unsigned gpio, unsigned ngpio);
+	int		(*teardown)(struct device *dev,
+				unsigned gpio, unsigned ngpio);
+};
+
+struct twl4030_madc_platform_data {
+	int		irq_line;
+};
+
+/* Boards have uniqe mappings of {row, col} --> keycode.
+ * Column and row are 8 bits each, but range only from 0..7.
+ * a PERSISTENT_KEY is "always on" and never reported.
+ */
+#define PERSISTENT_KEY(r, c)	KEY((r), (c), KEY_RESERVED)
+
+struct twl4030_keypad_data {
+	const struct matrix_keymap_data *keymap_data;
+	unsigned rows;
+	unsigned cols;
+	bool rep;
+};
+
+enum twl4030_usb_mode {
+	T2_USB_MODE_ULPI = 1,
+	T2_USB_MODE_CEA2011_3PIN = 2,
+};
+
+struct twl4030_usb_data {
+	enum twl4030_usb_mode	usb_mode;
+};
+
+struct twl4030_ins {
+	u16 pmb_message;
+	u8 delay;
+};
+
+struct twl4030_script {
+	struct twl4030_ins *script;
+	unsigned size;
+	u8 flags;
+#define TWL4030_WRST_SCRIPT	(1<<0)
+#define TWL4030_WAKEUP12_SCRIPT	(1<<1)
+#define TWL4030_WAKEUP3_SCRIPT	(1<<2)
+#define TWL4030_SLEEP_SCRIPT	(1<<3)
+};
+
+struct twl4030_resconfig {
+	u8 resource;
+	u8 devgroup;	/* Processor group that Power resource belongs to */
+	u8 type;	/* Power resource addressed, 6 / broadcast message */
+	u8 type2;	/* Power resource addressed, 3 / broadcast message */
+	u8 remap_off;	/* off state remapping */
+	u8 remap_sleep;	/* sleep state remapping */
+};
+
+struct twl4030_power_data {
+	struct twl4030_script **scripts;
+	unsigned num;
+	struct twl4030_resconfig *resource_config;
+#define TWL4030_RESCONFIG_UNDEF	((u8)-1)
+};
+
+extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts);
+
+struct twl4030_codec_audio_data {
+	unsigned int	audio_mclk;
+	unsigned int ramp_delay_value;
+	unsigned int hs_extmute:1;
+	void (*set_hs_extmute)(int mute);
+};
+
+struct twl4030_codec_vibra_data {
+	unsigned int	audio_mclk;
+	unsigned int	coexist;
+};
+
+struct twl4030_codec_data {
+	unsigned int	audio_mclk;
+	struct twl4030_codec_audio_data		*audio;
+	struct twl4030_codec_vibra_data		*vibra;
+};
+
+struct twl4030_platform_data {
+	unsigned				irq_base, irq_end;
+	struct twl4030_clock_init_data		*clock;
+	struct twl4030_bci_platform_data	*bci;
+	struct twl4030_gpio_platform_data	*gpio;
+	struct twl4030_madc_platform_data	*madc;
+	struct twl4030_keypad_data		*keypad;
+	struct twl4030_usb_data			*usb;
+	struct twl4030_power_data		*power;
+	struct twl4030_codec_data		*codec;
+
+	/* Common LDO regulators for TWL4030/TWL6030 */
+	struct regulator_init_data		*vdac;
+	struct regulator_init_data		*vaux1;
+	struct regulator_init_data		*vaux2;
+	struct regulator_init_data		*vaux3;
+	/* TWL4030 LDO regulators */
+	struct regulator_init_data		*vpll1;
+	struct regulator_init_data		*vpll2;
+	struct regulator_init_data		*vmmc1;
+	struct regulator_init_data		*vmmc2;
+	struct regulator_init_data		*vsim;
+	struct regulator_init_data		*vaux4;
+	struct regulator_init_data		*vio;
+	struct regulator_init_data		*vdd1;
+	struct regulator_init_data		*vdd2;
+	struct regulator_init_data		*vintana1;
+	struct regulator_init_data		*vintana2;
+	struct regulator_init_data		*vintdig;
+	/* TWL6030 LDO regulators */
+	struct regulator_init_data              *vmmc;
+	struct regulator_init_data              *vpp;
+	struct regulator_init_data              *vusim;
+	struct regulator_init_data              *vana;
+	struct regulator_init_data              *vcxio;
+	struct regulator_init_data              *vusb;
+};
+
+/*----------------------------------------------------------------------*/
+
+int twl4030_sih_setup(int module);
+
+/* Offsets to Power Registers */
+#define TWL4030_VDAC_DEV_GRP		0x3B
+#define TWL4030_VDAC_DEDICATED		0x3E
+#define TWL4030_VAUX1_DEV_GRP		0x17
+#define TWL4030_VAUX1_DEDICATED		0x1A
+#define TWL4030_VAUX2_DEV_GRP		0x1B
+#define TWL4030_VAUX2_DEDICATED		0x1E
+#define TWL4030_VAUX3_DEV_GRP		0x1F
+#define TWL4030_VAUX3_DEDICATED		0x22
+
+#if defined(CONFIG_TWL4030_BCI_BATTERY) || \
+	defined(CONFIG_TWL4030_BCI_BATTERY_MODULE)
+	extern int twl4030charger_usb_en(int enable);
+#else
+	static inline int twl4030charger_usb_en(int enable) { return 0; }
+#endif
+
+/*----------------------------------------------------------------------*/
+
+/* Linux-specific regulator identifiers ... for now, we only support
+ * the LDOs, and leave the three buck converters alone.  VDD1 and VDD2
+ * need to tie into hardware based voltage scaling (cpufreq etc), while
+ * VIO is generally fixed.
+ */
+
+/* TWL4030 SMPS/LDO's */
+/* EXTERNAL dc-to-dc buck converters */
+#define TWL4030_REG_VDD1	0
+#define TWL4030_REG_VDD2	1
+#define TWL4030_REG_VIO		2
+
+/* EXTERNAL LDOs */
+#define TWL4030_REG_VDAC	3
+#define TWL4030_REG_VPLL1	4
+#define TWL4030_REG_VPLL2	5	/* not on all chips */
+#define TWL4030_REG_VMMC1	6
+#define TWL4030_REG_VMMC2	7	/* not on all chips */
+#define TWL4030_REG_VSIM	8	/* not on all chips */
+#define TWL4030_REG_VAUX1	9	/* not on all chips */
+#define TWL4030_REG_VAUX2_4030	10	/* (twl4030-specific) */
+#define TWL4030_REG_VAUX2	11	/* (twl5030 and newer) */
+#define TWL4030_REG_VAUX3	12	/* not on all chips */
+#define TWL4030_REG_VAUX4	13	/* not on all chips */
+
+/* INTERNAL LDOs */
+#define TWL4030_REG_VINTANA1	14
+#define TWL4030_REG_VINTANA2	15
+#define TWL4030_REG_VINTDIG	16
+#define TWL4030_REG_VUSB1V5	17
+#define TWL4030_REG_VUSB1V8	18
+#define TWL4030_REG_VUSB3V1	19
+
+/* TWL6030 SMPS/LDO's */
+/* EXTERNAL dc-to-dc buck convertor contollable via SR */
+#define TWL6030_REG_VDD1	30
+#define TWL6030_REG_VDD2	31
+#define TWL6030_REG_VDD3	32
+
+/* Non SR compliant dc-to-dc buck convertors */
+#define	TWL6030_REG_VMEM	33
+#define TWL6030_REG_V2V1	34
+#define	TWL6030_REG_V1V29	35
+#define TWL6030_REG_V1V8	36
+
+/* EXTERNAL LDOs */
+#define TWL6030_REG_VAUX1_6030	37
+#define TWL6030_REG_VAUX2_6030	38
+#define TWL6030_REG_VAUX3_6030	39
+#define TWL6030_REG_VMMC	40
+#define TWL6030_REG_VPP		41
+#define TWL6030_REG_VUSIM	42
+#define TWL6030_REG_VANA	43
+#define TWL6030_REG_VCXIO	44
+#define TWL6030_REG_VDAC	45
+#define TWL6030_REG_VUSB	46
+
+/* INTERNAL LDOs */
+#define TWL6030_REG_VRTC	47
+
+#endif /* End of __TWL4030_H */