Merge branch 'linus' into perfcounters/core-v2

Merge reason: we have gathered quite a few conflicts, need to merge upstream

Conflicts:
	arch/powerpc/kernel/Makefile
	arch/x86/ia32/ia32entry.S
	arch/x86/include/asm/hardirq.h
	arch/x86/include/asm/unistd_32.h
	arch/x86/include/asm/unistd_64.h
	arch/x86/kernel/cpu/common.c
	arch/x86/kernel/irq.c
	arch/x86/kernel/syscall_table_32.S
	arch/x86/mm/iomap_32.c
	include/linux/sched.h
	kernel/Makefile

Signed-off-by: Ingo Molnar <mingo@elte.hu>

5 files changed, 92 insertions, 13 deletions

diff --git a/include/linux/regulator/bq24022.h b/include/linux/regulator/bq24022.h
index e84b0a9feda..a6d014005d4 100644
--- a/include/linux/regulator/bq24022.h
+++ b/include/linux/regulator/bq24022.h
@@ -10,6 +10,8 @@
  *
  */
 
+struct regulator_init_data;
+
 /**
  * bq24022_mach_info - platform data for bq24022
  * @gpio_nce: GPIO line connected to the nCE pin, used to enable / disable charging
@@ -18,4 +20,5 @@
 struct bq24022_mach_info {
 	int gpio_nce;
 	int gpio_iset2;
+	struct regulator_init_data *init_data;
 };
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 801bf77ff4e..277f4b964df 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
  *
- * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -88,6 +88,7 @@
  * FAIL           Regulator output has failed.
  * OVER_TEMP      Regulator over temp.
  * FORCE_DISABLE  Regulator shut down by software.
+ * VOLTAGE_CHANGE Regulator voltage changed.
  *
  * NOTE: These events can be OR'ed together when passed into handler.
  */
@@ -98,6 +99,7 @@
 #define REGULATOR_EVENT_FAIL			0x08
 #define REGULATOR_EVENT_OVER_TEMP		0x10
 #define REGULATOR_EVENT_FORCE_DISABLE		0x20
+#define REGULATOR_EVENT_VOLTAGE_CHANGE		0x40
 
 struct regulator;
 
@@ -140,6 +142,8 @@ int regulator_bulk_disable(int num_consumers,
 void regulator_bulk_free(int num_consumers,
 			 struct regulator_bulk_data *consumers);
 
+int regulator_count_voltages(struct regulator *regulator);
+int regulator_list_voltage(struct regulator *regulator, unsigned selector);
 int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
 int regulator_get_voltage(struct regulator *regulator);
 int regulator_set_current_limit(struct regulator *regulator,
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 2dae05705f1..4848d8dacd9 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
  *
- * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -21,25 +21,38 @@
 struct regulator_dev;
 struct regulator_init_data;
 
+enum regulator_status {
+	REGULATOR_STATUS_OFF,
+	REGULATOR_STATUS_ON,
+	REGULATOR_STATUS_ERROR,
+	/* fast/normal/idle/standby are flavors of "on" */
+	REGULATOR_STATUS_FAST,
+	REGULATOR_STATUS_NORMAL,
+	REGULATOR_STATUS_IDLE,
+	REGULATOR_STATUS_STANDBY,
+};
+
 /**
  * struct regulator_ops - regulator operations.
  *
- * This struct describes regulator operations which can be implemented by
- * regulator chip drivers.
- *
- * @enable: Enable the regulator.
- * @disable: Disable the regulator.
+ * @enable: Configure the regulator as enabled.
+ * @disable: Configure the regulator as disabled.
  * @is_enabled: Return 1 if the regulator is enabled, 0 otherwise.
  *
  * @set_voltage: Set the voltage for the regulator within the range specified.
  *               The driver should select the voltage closest to min_uV.
  * @get_voltage: Return the currently configured voltage for the regulator.
+ * @list_voltage: Return one of the supported voltages, in microvolts; zero
+ *	if the selector indicates a voltage that is unusable on this system;
+ *	or negative errno.  Selectors range from zero to one less than
+ *	regulator_desc.n_voltages.  Voltages may be reported in any order.
  *
  * @set_current_limit: Configure a limit for a current-limited regulator.
- * @get_current_limit: Get the limit for a current-limited regulator.
+ * @get_current_limit: Get the configured limit for a current-limited regulator.
  *
- * @set_mode: Set the operating mode for the regulator.
- * @get_mode: Get the current operating mode for the regulator.
+ * @get_mode: Get the configured operating mode for the regulator.
+ * @get_status: Return actual (not as-configured) status of regulator, as a
+ *	REGULATOR_STATUS value (or negative errno)
  * @get_optimum_mode: Get the most efficient operating mode for the regulator
  *                    when running with the specified parameters.
  *
@@ -51,9 +64,15 @@ struct regulator_init_data;
  *                       suspended.
  * @set_suspend_mode: Set the operating mode for the regulator when the
  *                    system is suspended.
+ *
+ * This struct describes regulator operations which can be implemented by
+ * regulator chip drivers.
  */
 struct regulator_ops {
 
+	/* enumerate supported voltages */
+	int (*list_voltage) (struct regulator_dev *, unsigned selector);
+
 	/* get/set regulator voltage */
 	int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV);
 	int (*get_voltage) (struct regulator_dev *);
@@ -72,6 +91,13 @@ struct regulator_ops {
 	int (*set_mode) (struct regulator_dev *, unsigned int mode);
 	unsigned int (*get_mode) (struct regulator_dev *);
 
+	/* report regulator status ... most other accessors report
+	 * control inputs, this reports results of combining inputs
+	 * from Linux (and other sources) with the actual load.
+	 * returns REGULATOR_STATUS_* or negative errno.
+	 */
+	int (*get_status)(struct regulator_dev *);
+
 	/* get most efficient regulator operating mode for load */
 	unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV,
 					  int output_uV, int load_uA);
@@ -106,6 +132,7 @@ enum regulator_type {
  *
  * @name: Identifying name for the regulator.
  * @id: Numerical identifier for the regulator.
+ * @n_voltages: Number of selectors available for ops.list_voltage().
  * @ops: Regulator operations table.
  * @irq: Interrupt number for the regulator.
  * @type: Indicates if the regulator is a voltage or current regulator.
@@ -114,14 +141,48 @@ enum regulator_type {
 struct regulator_desc {
 	const char *name;
 	int id;
+	unsigned n_voltages;
 	struct regulator_ops *ops;
 	int irq;
 	enum regulator_type type;
 	struct module *owner;
 };
 
+/*
+ * struct regulator_dev
+ *
+ * Voltage / Current regulator class device. One for each
+ * regulator.
+ *
+ * This should *not* be used directly by anything except the regulator
+ * core and notification injection (which should take the mutex and do
+ * no other direct access).
+ */
+struct regulator_dev {
+	struct regulator_desc *desc;
+	int use_count;
+
+	/* lists we belong to */
+	struct list_head list; /* list of all regulators */
+	struct list_head slist; /* list of supplied regulators */
+
+	/* lists we own */
+	struct list_head consumer_list; /* consumers we supply */
+	struct list_head supply_list; /* regulators we supply */
+
+	struct blocking_notifier_head notifier;
+	struct mutex mutex; /* consumer lock */
+	struct module *owner;
+	struct device dev;
+	struct regulation_constraints *constraints;
+	struct regulator_dev *supply;	/* for tree */
+
+	void *reg_data;		/* regulator_dev data */
+};
+
 struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
-	struct device *dev, void *driver_data);
+	struct device *dev, struct regulator_init_data *init_data,
+	void *driver_data);
 void regulator_unregister(struct regulator_dev *rdev);
 
 int regulator_notifier_call_chain(struct regulator_dev *rdev,
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
index 1387a5d2190..91b4da31f1b 100644
--- a/include/linux/regulator/fixed.h
+++ b/include/linux/regulator/fixed.h
@@ -14,9 +14,12 @@
 #ifndef __REGULATOR_FIXED_H
 #define __REGULATOR_FIXED_H
 
+struct regulator_init_data;
+
 struct fixed_voltage_config {
 	const char *supply_name;
 	int microvolts;
+	struct regulator_init_data *init_data;
 };
 
 #endif
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index 3794773b23d..bac64fa390f 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
  *
- * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -73,7 +73,9 @@ struct regulator_state {
  *
  * @always_on: Set if the regulator should never be disabled.
  * @boot_on: Set if the regulator is enabled when the system is initially
- *           started.
+ *           started.  If the regulator is not enabled by the hardware or
+ *           bootloader then it will be enabled when the constraints are
+ *           applied.
  * @apply_uV: Apply the voltage constraint when initialising.
  *
  * @input_uV: Input voltage for regulator when supplied by another regulator.
@@ -83,6 +85,7 @@ struct regulator_state {
  * @state_standby: State for regulator when system is suspended in standby
  *                 mode.
  * @initial_state: Suspend state to set by default.
+ * @initial_mode: Mode to set at startup.
  */
 struct regulation_constraints {
 
@@ -111,6 +114,9 @@ struct regulation_constraints {
 	struct regulator_state state_standby;
 	suspend_state_t initial_state; /* suspend state to set at init */
 
+	/* mode to set on startup */
+	unsigned int initial_mode;
+
 	/* constriant flags */
 	unsigned always_on:1;	/* regulator never off when system is on */
 	unsigned boot_on:1;	/* bootloader/firmware enabled regulator */
@@ -160,4 +166,6 @@ struct regulator_init_data {
 
 int regulator_suspend_prepare(suspend_state_t state);
 
+void regulator_has_full_constraints(void);
+
 #endif