Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (26 commits)
  i2c-rpx: Remove
  i2c-mpc: work around missing-9th-clock-pulse bug
  i2c: New PMC MSP71xx TWI bus driver
  i2c-savage4: Delete many unused defines
  i2c/tsl2550: Speed up initialization
  i2c: New bus driver for the TAOS evaluation modules
  i2c-i801: Use the internal 32-byte buffer on ICH4+
  i2c-i801: Various cleanups
  i2c: Add support for the TSL2550
  i2c-pxa: Support new-style I2C drivers
  i2c-gpio: Make some internal functions static
  i2c-gpio: Add support for new-style clients
  i2c-iop3xx: Switch to static adapter numbering
  i2c-sis5595: Resolve resource conflict with sis5595
  matroxfb: Clean-up i2c header inclusions
  i2c-nforce2: Add support for SMBus block transactions
  i2c-mpc: Use i2c_add_numbered_adapter
  i2c-mv64xxx: Use i2c_add_numbered_adapter
  i2c-piix4: Add support for the ATI SB700
  i2c: New DS1682 chip driver
  ...

3 files changed, 15 insertions, 6 deletions

diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index cae7d618030..2eaba21b9b1 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -90,7 +90,7 @@ extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
 				      const u8 *values);
 /* Returns the number of read bytes */
 extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
-					 u8 command, u8 *values);
+					 u8 command, u8 length, u8 *values);
 extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
 					  u8 command, u8 length,
 					  const u8 *values);
@@ -150,15 +150,20 @@ struct i2c_driver {
 
 /**
  * struct i2c_client - represent an I2C slave device
+ * @flags: I2C_CLIENT_TEN indicates the device uses a ten bit chip address;
+ *	I2C_CLIENT_PEC indicates it uses SMBus Packet Error Checking
  * @addr: Address used on the I2C bus connected to the parent adapter.
  * @name: Indicates the type of the device, usually a chip name that's
  *	generic enough to hide second-sourcing and compatible revisions.
+ * @adapter: manages the bus segment hosting this I2C device
  * @dev: Driver model device node for the slave.
+ * @irq: indicates the IRQ generated by this device (if any)
  * @driver_name: Identifies new-style driver used with this device; also
  *	used as the module name for hotplug/coldplug modprobe support.
  *
  * An i2c_client identifies a single device (i.e. chip) connected to an
- * i2c bus. The behaviour is defined by the routines of the driver.
+ * i2c bus. The behaviour exposed to Linux is defined by the driver
+ * managing the device.
  */
 struct i2c_client {
 	unsigned short flags;		/* div., see below		*/
@@ -180,7 +185,8 @@ struct i2c_client {
 
 static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj)
 {
-	return to_i2c_client(container_of(kobj, struct device, kobj));
+	struct device * const dev = container_of(kobj, struct device, kobj);
+	return to_i2c_client(dev);
 }
 
 static inline void *i2c_get_clientdata (struct i2c_client *dev)
@@ -201,7 +207,7 @@ static inline void i2c_set_clientdata (struct i2c_client *dev, void *data)
  * @addr: stored in i2c_client.addr
  * @platform_data: stored in i2c_client.dev.platform_data
  * @irq: stored in i2c_client.irq
-
+ *
  * I2C doesn't actually support hardware probing, although controllers and
  * devices may be able to use I2C_SMBUS_QUICK to tell whether or not there's
  * a device at a given address.  Drivers commonly need more information than
@@ -210,7 +216,7 @@ static inline void i2c_set_clientdata (struct i2c_client *dev, void *data)
  * i2c_board_info is used to build tables of information listing I2C devices
  * that are present.  This information is used to grow the driver model tree
  * for "new style" I2C drivers.  For mainboards this is done statically using
- * i2c_register_board_info(), where @bus_num represents an adapter that isn't
+ * i2c_register_board_info(); bus numbers identify adapters that aren't
  * yet available.  For add-on boards, i2c_new_device() does this dynamically
  * with the adapter already known.
  */
@@ -518,8 +524,9 @@ union i2c_smbus_data {
 #define I2C_SMBUS_WORD_DATA	    3
 #define I2C_SMBUS_PROC_CALL	    4
 #define I2C_SMBUS_BLOCK_DATA	    5
-#define I2C_SMBUS_I2C_BLOCK_DATA    6
+#define I2C_SMBUS_I2C_BLOCK_BROKEN  6
 #define I2C_SMBUS_BLOCK_PROC_CALL   7		/* SMBus 2.0 */
+#define I2C_SMBUS_I2C_BLOCK_DATA    8
 
 
 /* ----- commands for the ioctl like i2c_command call:
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 75c4d4d0689..8300001e907 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -371,6 +371,7 @@
 #define PCI_DEVICE_ID_ATI_IXP600_SMBUS	0x4385
 #define PCI_DEVICE_ID_ATI_IXP600_IDE	0x438c
 #define PCI_DEVICE_ID_ATI_IXP700_SATA	0x4390
+#define PCI_DEVICE_ID_ATI_IXP700_SMBUS	0x4395
 #define PCI_DEVICE_ID_ATI_IXP700_IDE	0x439c
 
 #define PCI_VENDOR_ID_VLSI		0x1004
diff --git a/include/linux/serio.h b/include/linux/serio.h
index 1ebf0455e22..d9377ce9ffd 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -209,5 +209,6 @@ static inline void serio_unpin_driver(struct serio *serio)
 #define SERIO_PENMOUNT	0x31
 #define SERIO_TOUCHRIGHT	0x32
 #define SERIO_TOUCHWIN	0x33
+#define SERIO_TAOSEVM	0x34
 
 #endif