aboutsummaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2008-08-13 20:50:10 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2008-08-13 20:50:10 -0700
commitb635acec48bcaa9183fcbf4e3955616b0d4119b5 (patch)
tree55bf04579019674736355927743bbb4a8913d5d5 /include
parent9921b256bb7402143a5bf0b722582562b6485eb8 (diff)
parentca6d1b1333bc2e61e37982de1f28d8604c232414 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (47 commits) usb: musb: pass configuration specifics via pdata usb: musb: fix hanging when rmmod gadget driver USB: Add MUSB and TUSB support USB: serial: remove CONFIG_USB_DEBUG from sierra and option drivers USB: Add vendor/product id of ZTE MF628 to option USB: quirk PLL power down mode USB: omap_udc: fix compilation with debug enabled usb: cdc-acm: drain writes on close usb: cdc-acm: stop dropping tx buffers usb: cdc-acm: bugfix release() usb gadget: issue notifications from ACM function usb gadget: remove needless struct members USB: sh: r8a66597-hcd: fix disconnect regression USB: isp1301: fix compilation USB: fix compiler warning fix usb-storage: unusual_devs entry for Nokia 5300 USB: cdc-acm.c: Fix compile warnings USB: BandRich BandLuxe C150/C250 HSPA Data Card Driver USB: ftdi_sio: add support for PHI Fisco data cable (FT232BM based, VID/PID 0403:e40b) usb: isp1760: don't be noisy about short packets. ...
Diffstat (limited to 'include')
-rw-r--r--include/linux/usb.h2
-rw-r--r--include/linux/usb/musb.h98
-rw-r--r--include/linux/usb/serial.h3
3 files changed, 102 insertions, 1 deletions
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 5811c5da69f..0924cd9c30f 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -110,6 +110,8 @@ enum usb_interface_condition {
* @sysfs_files_created: sysfs attributes exist
* @needs_remote_wakeup: flag set when the driver requires remote-wakeup
* capability during autosuspend.
+ * @needs_binding: flag set when the driver should be re-probed or unbound
+ * following a reset or suspend operation it doesn't support.
* @dev: driver model's view of this device
* @usb_dev: if an interface is bound to the USB major, this will point
* to the sysfs representation for that device.
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
new file mode 100644
index 00000000000..630962c04ca
--- /dev/null
+++ b/include/linux/usb/musb.h
@@ -0,0 +1,98 @@
+/*
+ * This is used to for host and peripheral modes of the driver for
+ * Inventra (Multidrop) Highspeed Dual-Role Controllers: (M)HDRC.
+ *
+ * Board initialization should put one of these into dev->platform_data,
+ * probably on some platform_device named "musb_hdrc". It encapsulates
+ * key configuration differences between boards.
+ */
+
+/* The USB role is defined by the connector used on the board, so long as
+ * standards are being followed. (Developer boards sometimes won't.)
+ */
+enum musb_mode {
+ MUSB_UNDEFINED = 0,
+ MUSB_HOST, /* A or Mini-A connector */
+ MUSB_PERIPHERAL, /* B or Mini-B connector */
+ MUSB_OTG /* Mini-AB connector */
+};
+
+struct clk;
+
+struct musb_hdrc_eps_bits {
+ const char name[16];
+ u8 bits;
+};
+
+struct musb_hdrc_config {
+ /* MUSB configuration-specific details */
+ unsigned multipoint:1; /* multipoint device */
+ unsigned dyn_fifo:1; /* supports dynamic fifo sizing */
+ unsigned soft_con:1; /* soft connect required */
+ unsigned utm_16:1; /* utm data witdh is 16 bits */
+ unsigned big_endian:1; /* true if CPU uses big-endian */
+ unsigned mult_bulk_tx:1; /* Tx ep required for multbulk pkts */
+ unsigned mult_bulk_rx:1; /* Rx ep required for multbulk pkts */
+ unsigned high_iso_tx:1; /* Tx ep required for HB iso */
+ unsigned high_iso_rx:1; /* Rx ep required for HD iso */
+ unsigned dma:1; /* supports DMA */
+ unsigned vendor_req:1; /* vendor registers required */
+
+ u8 num_eps; /* number of endpoints _with_ ep0 */
+ u8 dma_channels; /* number of dma channels */
+ u8 dyn_fifo_size; /* dynamic size in bytes */
+ u8 vendor_ctrl; /* vendor control reg width */
+ u8 vendor_stat; /* vendor status reg witdh */
+ u8 dma_req_chan; /* bitmask for required dma channels */
+ u8 ram_bits; /* ram address size */
+
+ struct musb_hdrc_eps_bits *eps_bits;
+};
+
+struct musb_hdrc_platform_data {
+ /* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
+ u8 mode;
+
+ /* for clk_get() */
+ const char *clock;
+
+ /* (HOST or OTG) switch VBUS on/off */
+ int (*set_vbus)(struct device *dev, int is_on);
+
+ /* (HOST or OTG) mA/2 power supplied on (default = 8mA) */
+ u8 power;
+
+ /* (PERIPHERAL) mA/2 max power consumed (default = 100mA) */
+ u8 min_power;
+
+ /* (HOST or OTG) msec/2 after VBUS on till power good */
+ u8 potpgt;
+
+ /* Power the device on or off */
+ int (*set_power)(int state);
+
+ /* Turn device clock on or off */
+ int (*set_clock)(struct clk *clock, int is_on);
+
+ /* MUSB configuration-specific details */
+ struct musb_hdrc_config *config;
+};
+
+
+/* TUSB 6010 support */
+
+#define TUSB6010_OSCCLK_60 16667 /* psec/clk @ 60.0 MHz */
+#define TUSB6010_REFCLK_24 41667 /* psec/clk @ 24.0 MHz XI */
+#define TUSB6010_REFCLK_19 52083 /* psec/clk @ 19.2 MHz CLKIN */
+
+#ifdef CONFIG_ARCH_OMAP2
+
+extern int __init tusb6010_setup_interface(
+ struct musb_hdrc_platform_data *data,
+ unsigned ps_refclk, unsigned waitpin,
+ unsigned async_cs, unsigned sync_cs,
+ unsigned irq, unsigned dmachan);
+
+extern int tusb6010_platform_retime(unsigned is_refclk);
+
+#endif /* OMAP2 */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 09a3e6a7518..655341d0f53 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -17,7 +17,8 @@
#include <linux/mutex.h>
#define SERIAL_TTY_MAJOR 188 /* Nice legal number now */
-#define SERIAL_TTY_MINORS 255 /* loads of devices :) */
+#define SERIAL_TTY_MINORS 254 /* loads of devices :) */
+#define SERIAL_TTY_NO_MINOR 255 /* No minor was assigned */
/* The maximum number of ports one device can grab at once */
#define MAX_NUM_PORTS 8