aboutsummaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorMarkus Lidel <Markus.Lidel@shadowconnect.com>2005-06-23 22:02:16 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-06-24 00:05:28 -0700
commitf10378fff658f61307496e0ae00095041725cf07 (patch)
tree0c0413649317677771fa325dded94f1e12a6a0b7 /include
parentf88e119c4b824a5017456fa094950d0f4092d96c (diff)
[PATCH] I2O: new sysfs attributes and Adaptec specific block device access and 64-bit DMA support
Changes: - Added Bus-OSM which could be used by user space programs to reset a channel on the controller - Make ioctl's in Config-OSM obsolete in prefer for sysfs attributes and move those to its own file - Added sysfs attribute for firmware read and write access for I2O controllers - Added special handling of firmware read and write access for Adaptec controllers - Added vendor id and product id as sysfs-attribute to Executive classes - Added automatic notification of LCT change handling to Exec-OSM - Added flushing function to Block-OSM for later barrier implementation - Use PRIVATE messages for Block access on Adaptec controllers, which are faster then BLOCK class access - Cleaned up support for Promise controller - New messages are now detected using the IRQ status register as suggested by the I2O spec - Added i2o_dma_high() and i2o_dma_low() functions - Added facility for SG tablesize calculation when using 32-bit and 64-bit DMA addresses - Added i2o_dma_map_single() and i2o_dma_map_sg() which could build the SG list for 32-bit as well as 64-bit DMA addresses Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'include')
-rw-r--r--include/linux/i2o-dev.h6
-rw-r--r--include/linux/i2o.h321
2 files changed, 270 insertions, 57 deletions
diff --git a/include/linux/i2o-dev.h b/include/linux/i2o-dev.h
index 3414325bdcf..90c984ecd52 100644
--- a/include/linux/i2o-dev.h
+++ b/include/linux/i2o-dev.h
@@ -32,6 +32,10 @@ typedef unsigned int u32;
#endif /* __KERNEL__ */
+/*
+ * Vendors
+ */
+#define I2O_VENDOR_DPT 0x001b
/*
* I2O Control IOCTLs and structures
@@ -333,7 +337,7 @@ typedef struct _i2o_status_block {
#define I2O_CLASS_ATE_PERIPHERAL 0x061
#define I2O_CLASS_FLOPPY_CONTROLLER 0x070
#define I2O_CLASS_FLOPPY_DEVICE 0x071
-#define I2O_CLASS_BUS_ADAPTER_PORT 0x080
+#define I2O_CLASS_BUS_ADAPTER 0x080
#define I2O_CLASS_PEER_TRANSPORT_AGENT 0x090
#define I2O_CLASS_PEER_TRANSPORT 0x091
#define I2O_CLASS_END 0xfff
diff --git a/include/linux/i2o.h b/include/linux/i2o.h
index e8cd1129001..497ea574f96 100644
--- a/include/linux/i2o.h
+++ b/include/linux/i2o.h
@@ -157,7 +157,8 @@ struct i2o_controller {
void __iomem *in_port; /* Inbout port address */
void __iomem *out_port; /* Outbound port address */
- void __iomem *irq_mask; /* Interrupt register address */
+ void __iomem *irq_status; /* Interrupt status register address */
+ void __iomem *irq_mask; /* Interrupt mask register address */
/* Dynamic LCT related data */
@@ -242,15 +243,6 @@ extern int i2o_msg_post_wait_mem(struct i2o_controller *, u32, unsigned long,
extern void i2o_msg_nop(struct i2o_controller *, u32);
static inline void i2o_flush_reply(struct i2o_controller *, u32);
-/* DMA handling functions */
-static inline int i2o_dma_alloc(struct device *, struct i2o_dma *, size_t,
- unsigned int);
-static inline void i2o_dma_free(struct device *, struct i2o_dma *);
-int i2o_dma_realloc(struct device *, struct i2o_dma *, size_t, unsigned int);
-
-static inline int i2o_dma_map(struct device *, struct i2o_dma *);
-static inline void i2o_dma_unmap(struct device *, struct i2o_dma *);
-
/* IOP functions */
extern int i2o_status_get(struct i2o_controller *);
@@ -275,6 +267,16 @@ static inline u32 i2o_ptr_high(void *ptr)
{
return (u32) ((u64) ptr >> 32);
};
+
+static inline u32 i2o_dma_low(dma_addr_t dma_addr)
+{
+ return (u32) (u64) dma_addr;
+};
+
+static inline u32 i2o_dma_high(dma_addr_t dma_addr)
+{
+ return (u32) ((u64) dma_addr >> 32);
+};
#else
static inline u32 i2o_cntxt_list_add(struct i2o_controller *c, void *ptr)
{
@@ -305,8 +307,246 @@ static inline u32 i2o_ptr_high(void *ptr)
{
return 0;
};
+
+static inline u32 i2o_dma_low(dma_addr_t dma_addr)
+{
+ return (u32) dma_addr;
+};
+
+static inline u32 i2o_dma_high(dma_addr_t dma_addr)
+{
+ return 0;
+};
+#endif
+
+/**
+ * i2o_sg_tablesize - Calculate the maximum number of elements in a SGL
+ * @c: I2O controller for which the calculation should be done
+ * @body_size: maximum body size used for message in 32-bit words.
+ *
+ * Return the maximum number of SG elements in a SG list.
+ */
+static inline u16 i2o_sg_tablesize(struct i2o_controller *c, u16 body_size)
+{
+ i2o_status_block *sb = c->status_block.virt;
+ u16 sg_count =
+ (sb->inbound_frame_size - sizeof(struct i2o_message) / 4) -
+ body_size;
+
+ if (c->pae_support) {
+ /*
+ * for 64-bit a SG attribute element must be added and each
+ * SG element needs 12 bytes instead of 8.
+ */
+ sg_count -= 2;
+ sg_count /= 3;
+ } else
+ sg_count /= 2;
+
+ if (c->short_req && (sg_count > 8))
+ sg_count = 8;
+
+ return sg_count;
+};
+
+/**
+ * i2o_dma_map_single - Map pointer to controller and fill in I2O message.
+ * @c: I2O controller
+ * @ptr: pointer to the data which should be mapped
+ * @size: size of data in bytes
+ * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE
+ * @sg_ptr: pointer to the SG list inside the I2O message
+ *
+ * This function does all necessary DMA handling and also writes the I2O
+ * SGL elements into the I2O message. For details on DMA handling see also
+ * dma_map_single(). The pointer sg_ptr will only be set to the end of the
+ * SG list if the allocation was successful.
+ *
+ * Returns DMA address which must be checked for failures using
+ * dma_mapping_error().
+ */
+static inline dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr,
+ size_t size,
+ enum dma_data_direction direction,
+ u32 __iomem ** sg_ptr)
+{
+ u32 sg_flags;
+ u32 __iomem *mptr = *sg_ptr;
+ dma_addr_t dma_addr;
+
+ switch (direction) {
+ case DMA_TO_DEVICE:
+ sg_flags = 0xd4000000;
+ break;
+ case DMA_FROM_DEVICE:
+ sg_flags = 0xd0000000;
+ break;
+ default:
+ return 0;
+ }
+
+ dma_addr = dma_map_single(&c->pdev->dev, ptr, size, direction);
+ if (!dma_mapping_error(dma_addr)) {
+#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
+ if ((sizeof(dma_addr_t) > 4) && c->pae_support) {
+ writel(0x7C020002, mptr++);
+ writel(PAGE_SIZE, mptr++);
+ }
+#endif
+
+ writel(sg_flags | size, mptr++);
+ writel(i2o_dma_low(dma_addr), mptr++);
+#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
+ if ((sizeof(dma_addr_t) > 4) && c->pae_support)
+ writel(i2o_dma_high(dma_addr), mptr++);
+#endif
+ *sg_ptr = mptr;
+ }
+ return dma_addr;
+};
+
+/**
+ * i2o_dma_map_sg - Map a SG List to controller and fill in I2O message.
+ * @c: I2O controller
+ * @sg: SG list to be mapped
+ * @sg_count: number of elements in the SG list
+ * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE
+ * @sg_ptr: pointer to the SG list inside the I2O message
+ *
+ * This function does all necessary DMA handling and also writes the I2O
+ * SGL elements into the I2O message. For details on DMA handling see also
+ * dma_map_sg(). The pointer sg_ptr will only be set to the end of the SG
+ * list if the allocation was successful.
+ *
+ * Returns 0 on failure or 1 on success.
+ */
+static inline int i2o_dma_map_sg(struct i2o_controller *c,
+ struct scatterlist *sg, int sg_count,
+ enum dma_data_direction direction,
+ u32 __iomem ** sg_ptr)
+{
+ u32 sg_flags;
+ u32 __iomem *mptr = *sg_ptr;
+
+ switch (direction) {
+ case DMA_TO_DEVICE:
+ sg_flags = 0x14000000;
+ break;
+ case DMA_FROM_DEVICE:
+ sg_flags = 0x10000000;
+ break;
+ default:
+ return 0;
+ }
+
+ sg_count = dma_map_sg(&c->pdev->dev, sg, sg_count, direction);
+ if (!sg_count)
+ return 0;
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
+ if ((sizeof(dma_addr_t) > 4) && c->pae_support) {
+ writel(0x7C020002, mptr++);
+ writel(PAGE_SIZE, mptr++);
+ }
#endif
+ while (sg_count-- > 0) {
+ if (!sg_count)
+ sg_flags |= 0xC0000000;
+ writel(sg_flags | sg_dma_len(sg), mptr++);
+ writel(i2o_dma_low(sg_dma_address(sg)), mptr++);
+#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
+ if ((sizeof(dma_addr_t) > 4) && c->pae_support)
+ writel(i2o_dma_high(sg_dma_address(sg)), mptr++);
+#endif
+ sg++;
+ }
+ *sg_ptr = mptr;
+
+ return 1;
+};
+
+/**
+ * i2o_dma_alloc - Allocate DMA memory
+ * @dev: struct device pointer to the PCI device of the I2O controller
+ * @addr: i2o_dma struct which should get the DMA buffer
+ * @len: length of the new DMA memory
+ * @gfp_mask: GFP mask
+ *
+ * Allocate a coherent DMA memory and write the pointers into addr.
+ *
+ * Returns 0 on success or -ENOMEM on failure.
+ */
+static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr,
+ size_t len, unsigned int gfp_mask)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ int dma_64 = 0;
+
+ if ((sizeof(dma_addr_t) > 4) && (pdev->dma_mask == DMA_64BIT_MASK)) {
+ dma_64 = 1;
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK))
+ return -ENOMEM;
+ }
+
+ addr->virt = dma_alloc_coherent(dev, len, &addr->phys, gfp_mask);
+
+ if ((sizeof(dma_addr_t) > 4) && dma_64)
+ if (pci_set_dma_mask(pdev, DMA_64BIT_MASK))
+ printk(KERN_WARNING "i2o: unable to set 64-bit DMA");
+
+ if (!addr->virt)
+ return -ENOMEM;
+
+ memset(addr->virt, 0, len);
+ addr->len = len;
+
+ return 0;
+};
+
+/**
+ * i2o_dma_free - Free DMA memory
+ * @dev: struct device pointer to the PCI device of the I2O controller
+ * @addr: i2o_dma struct which contains the DMA buffer
+ *
+ * Free a coherent DMA memory and set virtual address of addr to NULL.
+ */
+static inline void i2o_dma_free(struct device *dev, struct i2o_dma *addr)
+{
+ if (addr->virt) {
+ if (addr->phys)
+ dma_free_coherent(dev, addr->len, addr->virt,
+ addr->phys);
+ else
+ kfree(addr->virt);
+ addr->virt = NULL;
+ }
+};
+
+/**
+ * i2o_dma_realloc - Realloc DMA memory
+ * @dev: struct device pointer to the PCI device of the I2O controller
+ * @addr: pointer to a i2o_dma struct DMA buffer
+ * @len: new length of memory
+ * @gfp_mask: GFP mask
+ *
+ * If there was something allocated in the addr, free it first. If len > 0
+ * than try to allocate it and write the addresses back to the addr
+ * structure. If len == 0 set the virtual address to NULL.
+ *
+ * Returns the 0 on success or negative error code on failure.
+ */
+static inline int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr,
+ size_t len, unsigned int gfp_mask)
+{
+ i2o_dma_free(dev, addr);
+
+ if (len)
+ return i2o_dma_alloc(dev, addr, len, gfp_mask);
+
+ return 0;
+};
+
/* I2O driver (OSM) functions */
extern int i2o_driver_register(struct i2o_driver *);
extern void i2o_driver_unregister(struct i2o_driver *);
@@ -375,10 +615,11 @@ extern int i2o_device_claim_release(struct i2o_device *);
/* Exec OSM functions */
extern int i2o_exec_lct_get(struct i2o_controller *);
-/* device / driver conversion functions */
+/* device / driver / kobject conversion functions */
#define to_i2o_driver(drv) container_of(drv,struct i2o_driver, driver)
#define to_i2o_device(dev) container_of(dev, struct i2o_device, device)
#define to_i2o_controller(dev) container_of(dev, struct i2o_controller, device)
+#define kobj_to_i2o_device(kobj) to_i2o_device(container_of(kobj, struct device, kobj))
/**
* i2o_msg_get - obtain an I2O message from the IOP
@@ -466,8 +707,10 @@ static inline struct i2o_message __iomem *i2o_msg_out_to_virt(struct
i2o_controller *c,
u32 m)
{
- BUG_ON(m < c->out_queue.phys
- || m >= c->out_queue.phys + c->out_queue.len);
+ if (unlikely
+ (m < c->out_queue.phys
+ || m >= c->out_queue.phys + c->out_queue.len))
+ return NULL;
return c->out_queue.virt + (m - c->out_queue.phys);
};
@@ -532,48 +775,6 @@ static inline void i2o_dma_free(struct device *dev, struct i2o_dma *addr)
}
};
-/**
- * i2o_dma_map - Map the memory to DMA
- * @dev: struct device pointer to the PCI device of the I2O controller
- * @addr: i2o_dma struct which should be mapped
- *
- * Map the memory in addr->virt to coherent DMA memory and write the
- * physical address into addr->phys.
- *
- * Returns 0 on success or -ENOMEM on failure.
- */
-static inline int i2o_dma_map(struct device *dev, struct i2o_dma *addr)
-{
- if (!addr->virt)
- return -EFAULT;
-
- if (!addr->phys)
- addr->phys = dma_map_single(dev, addr->virt, addr->len,
- DMA_BIDIRECTIONAL);
- if (!addr->phys)
- return -ENOMEM;
-
- return 0;
-};
-
-/**
- * i2o_dma_unmap - Unmap the DMA memory
- * @dev: struct device pointer to the PCI device of the I2O controller
- * @addr: i2o_dma struct which should be unmapped
- *
- * Unmap the memory in addr->virt from DMA memory.
- */
-static inline void i2o_dma_unmap(struct device *dev, struct i2o_dma *addr)
-{
- if (!addr->virt)
- return;
-
- if (addr->phys) {
- dma_unmap_single(dev, addr->phys, addr->len, DMA_BIDIRECTIONAL);
- addr->phys = 0;
- }
-};
-
/*
* Endian handling wrapped into the macro - keeps the core code
* cleaner.
@@ -726,6 +927,14 @@ extern void i2o_debug_state(struct i2o_controller *c);
#define I2O_CMD_SCSI_BUSRESET 0x27
/*
+ * Bus Adapter Class
+ */
+#define I2O_CMD_BUS_ADAPTER_RESET 0x85
+#define I2O_CMD_BUS_RESET 0x87
+#define I2O_CMD_BUS_SCAN 0x89
+#define I2O_CMD_BUS_QUIESCE 0x8b
+
+/*
* Random Block Storage Class
*/
#define I2O_CMD_BLOCK_READ 0x30
@@ -948,7 +1157,7 @@ extern void i2o_debug_state(struct i2o_controller *c);
/* request queue sizes */
#define I2O_MAX_SECTORS 1024
-#define I2O_MAX_SEGMENTS 128
+#define I2O_MAX_PHYS_SEGMENTS MAX_PHYS_SEGMENTS
#define I2O_REQ_MEMPOOL_SIZE 32