MERGE-via-pending-tracking-hist-MERGE-via-stable-tracking-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040-1232632141

pending-tracking-hist top was MERGE-via-stable-tracking-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040-1232632141 / fdf777a63bcb59e0dfd78bfe2c6242e01f6d4eb9 ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-stable-tracking-hist-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040

stable-tracking-hist top was MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040 / 90463bfd2d5a3c8b52f6e6d71024a00e052b0ced ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-mokopatches-tracking-hist-fix-stray-endmenu-patch

mokopatches-tracking-hist top was fix-stray-endmenu-patch / 3630e0be570de8057e7f8d2fe501ed353cdf34e6 ... parent commitmessage:
From: Andy Green <andy@openmoko.com>
fix-stray-endmenu.patch

Signed-off-by: Andy Green <andy@openmoko.com>

10 files changed, 2127 insertions, 0 deletions

diff --git a/net/wimax/Kconfig b/net/wimax/Kconfig
new file mode 100644
index 00000000000..18495cdcd10
--- /dev/null
+++ b/net/wimax/Kconfig
@@ -0,0 +1,52 @@
+#
+# WiMAX LAN device configuration
+#
+# Note the ugly 'depends on' on WIMAX: that disallows RFKILL to be a
+# module if WIMAX is to be linked in. The WiMAX code is done in such a
+# way that it doesn't require and explicit dependency on RFKILL in
+# case an embedded system wants to rip it out.
+#
+# As well, enablement of the RFKILL code means we need the INPUT layer
+# support to inject events coming from hw rfkill switches. That
+# dependency could be killed if input.h provided appropiate means to
+# work when input is disabled.
+
+comment "WiMAX Wireless Broadband support requires CONFIG_INPUT enabled"
+	depends on INPUT = n && RFKILL != n
+
+menuconfig WIMAX
+	tristate "WiMAX Wireless Broadband support"
+	depends on (y && RFKILL != m) || m
+	depends on (INPUT && RFKILL != n) || RFKILL = n
+	help
+
+	  Select to configure support for devices that provide
+	  wireless broadband connectivity using the WiMAX protocol
+	  (IEEE 802.16).
+
+	  Please note that most of these devices require signing up
+	  for a service plan with a provider.
+
+	  The different WiMAX drivers can be enabled in the menu entry
+
+	  Device Drivers > Network device support > WiMAX Wireless
+	  Broadband devices
+
+	  If unsure, it is safe to select M (module).
+
+config WIMAX_DEBUG_LEVEL
+	int "WiMAX debug level"
+	depends on WIMAX
+	default 8
+	help
+
+	  Select the maximum debug verbosity level to be compiled into
+	  the WiMAX stack code.
+
+	  By default, debug messages are disabled at runtime and can
+	  be selectively enabled for different parts of the code using
+	  the sysfs debug-levels file.
+
+	  If set at zero, this will compile out all the debug code.
+
+	  It is recommended that it is left at 8.
diff --git a/net/wimax/Makefile b/net/wimax/Makefile
new file mode 100644
index 00000000000..5b80b941c2c
--- /dev/null
+++ b/net/wimax/Makefile
@@ -0,0 +1,13 @@
+
+obj-$(CONFIG_WIMAX)		+= wimax.o
+
+wimax-y :=		\
+	id-table.o	\
+	op-msg.o	\
+	op-reset.o	\
+	op-rfkill.o	\
+	stack.o
+
+wimax-$(CONFIG_DEBUG_FS) += debugfs.o
+
+
diff --git a/net/wimax/debug-levels.h b/net/wimax/debug-levels.h
new file mode 100644
index 00000000000..1c29123a3aa
--- /dev/null
+++ b/net/wimax/debug-levels.h
@@ -0,0 +1,42 @@
+/*
+ * Linux WiMAX Stack
+ * Debug levels control file for the wimax module
+ *
+ *
+ * Copyright (C) 2007-2008 Intel Corporation <linux-wimax@intel.com>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef __debug_levels__h__
+#define __debug_levels__h__
+
+/* Maximum compile and run time debug level for all submodules */
+#define D_MODULENAME wimax
+#define D_MASTER CONFIG_WIMAX_DEBUG_LEVEL
+
+#include <linux/wimax/debug.h>
+
+/* List of all the enabled modules */
+enum d_module {
+	D_SUBMODULE_DECLARE(debugfs),
+	D_SUBMODULE_DECLARE(id_table),
+	D_SUBMODULE_DECLARE(op_msg),
+	D_SUBMODULE_DECLARE(op_reset),
+	D_SUBMODULE_DECLARE(op_rfkill),
+	D_SUBMODULE_DECLARE(stack),
+};
+
+#endif /* #ifndef __debug_levels__h__ */
diff --git a/net/wimax/debugfs.c b/net/wimax/debugfs.c
new file mode 100644
index 00000000000..87cf4430079
--- /dev/null
+++ b/net/wimax/debugfs.c
@@ -0,0 +1,90 @@
+/*
+ * Linux WiMAX
+ * Debugfs support
+ *
+ *
+ * Copyright (C) 2005-2006 Intel Corporation <linux-wimax@intel.com>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/debugfs.h>
+#include <linux/wimax.h>
+#include "wimax-internal.h"
+
+#define D_SUBMODULE debugfs
+#include "debug-levels.h"
+
+
+/* Debug framework control of debug levels */
+struct d_level D_LEVEL[] = {
+	D_SUBMODULE_DEFINE(debugfs),
+	D_SUBMODULE_DEFINE(id_table),
+	D_SUBMODULE_DEFINE(op_msg),
+	D_SUBMODULE_DEFINE(op_reset),
+	D_SUBMODULE_DEFINE(op_rfkill),
+	D_SUBMODULE_DEFINE(stack),
+};
+size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
+
+#define __debugfs_register(prefix, name, parent)			\
+do {									\
+	result = d_level_register_debugfs(prefix, name, parent);	\
+	if (result < 0)							\
+		goto error;						\
+} while (0)
+
+
+int wimax_debugfs_add(struct wimax_dev *wimax_dev)
+{
+	int result;
+	struct net_device *net_dev = wimax_dev->net_dev;
+	struct device *dev = net_dev->dev.parent;
+	struct dentry *dentry;
+	char buf[128];
+
+	snprintf(buf, sizeof(buf), "wimax:%s", net_dev->name);
+	dentry = debugfs_create_dir(buf, NULL);
+	result = PTR_ERR(dentry);
+	if (IS_ERR(dentry)) {
+		if (result == -ENODEV)
+			result = 0;	/* No debugfs support */
+		else
+			dev_err(dev, "Can't create debugfs dentry: %d\n",
+				result);
+		goto out;
+	}
+	wimax_dev->debugfs_dentry = dentry;
+	__debugfs_register("wimax_dl_", debugfs, dentry);
+	__debugfs_register("wimax_dl_", id_table, dentry);
+	__debugfs_register("wimax_dl_", op_msg, dentry);
+	__debugfs_register("wimax_dl_", op_reset, dentry);
+	__debugfs_register("wimax_dl_", op_rfkill, dentry);
+	__debugfs_register("wimax_dl_", stack, dentry);
+	result = 0;
+out:
+	return result;
+
+error:
+	debugfs_remove_recursive(wimax_dev->debugfs_dentry);
+	return result;
+}
+
+void wimax_debugfs_rm(struct wimax_dev *wimax_dev)
+{
+	debugfs_remove_recursive(wimax_dev->debugfs_dentry);
+}
+
+
diff --git a/net/wimax/id-table.c b/net/wimax/id-table.c
new file mode 100644
index 00000000000..5e685f7eda9
--- /dev/null
+++ b/net/wimax/id-table.c
@@ -0,0 +1,144 @@
+/*
+ * Linux WiMAX
+ * Mappping of generic netlink family IDs to net devices
+ *
+ *
+ * Copyright (C) 2005-2006 Intel Corporation <linux-wimax@intel.com>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * We assign a single generic netlink family ID to each device (to
+ * simplify lookup).
+ *
+ * We need a way to map family ID to a wimax_dev pointer.
+ *
+ * The idea is to use a very simple lookup. Using a netlink attribute
+ * with (for example) the interface name implies a heavier search over
+ * all the network devices; seemed kind of a waste given that we know
+ * we are looking for a WiMAX device and that most systems will have
+ * just a single WiMAX adapter.
+ *
+ * We put all the WiMAX devices in the system in a linked list and
+ * match the generic link family ID against the list.
+ *
+ * By using a linked list, the case of a single adapter in the system
+ * becomes (almost) no overhead, while still working for many more. If
+ * it ever goes beyond two, I'll be surprised.
+ */
+#include <linux/device.h>
+#include <net/genetlink.h>
+#include <linux/netdevice.h>
+#include <linux/list.h>
+#include <linux/wimax.h>
+#include "wimax-internal.h"
+
+
+#define D_SUBMODULE id_table
+#include "debug-levels.h"
+
+
+static DEFINE_SPINLOCK(wimax_id_table_lock);
+static struct list_head wimax_id_table = LIST_HEAD_INIT(wimax_id_table);
+
+
+/*
+ * wimax_id_table_add - add a gennetlink familiy ID / wimax_dev mapping
+ *
+ * @wimax_dev: WiMAX device descriptor to associate to the Generic
+ *     Netlink family ID.
+ *
+ * Look for an empty spot in the ID table; if none found, double the
+ * table's size and get the first spot.
+ */
+void wimax_id_table_add(struct wimax_dev *wimax_dev)
+{
+	d_fnstart(3, NULL, "(wimax_dev %p)\n", wimax_dev);
+	spin_lock(&wimax_id_table_lock);
+	list_add(&wimax_dev->id_table_node, &wimax_id_table);
+	spin_unlock(&wimax_id_table_lock);
+	d_fnend(3, NULL, "(wimax_dev %p)\n", wimax_dev);
+}
+
+
+/*
+ * wimax_get_netdev_by_info - lookup a wimax_dev from the gennetlink info
+ *
+ * The generic netlink family ID has been filled out in the
+ * nlmsghdr->nlmsg_type field, so we pull it from there, look it up in
+ * the mapping table and reference the wimax_dev.
+ *
+ * When done, the reference should be dropped with
+ * 'dev_put(wimax_dev->net_dev)'.
+ */
+struct wimax_dev *wimax_dev_get_by_genl_info(
+	struct genl_info *info, int ifindex)
+{
+	struct wimax_dev *wimax_dev = NULL;
+
+	d_fnstart(3, NULL, "(info %p ifindex %d)\n", info, ifindex);
+	spin_lock(&wimax_id_table_lock);
+	list_for_each_entry(wimax_dev, &wimax_id_table, id_table_node) {
+		if (wimax_dev->net_dev->ifindex == ifindex) {
+			dev_hold(wimax_dev->net_dev);
+			break;
+		}
+	}
+	if (wimax_dev == NULL)
+		d_printf(1, NULL, "wimax: no devices found with ifindex %d\n",
+			 ifindex);
+	spin_unlock(&wimax_id_table_lock);
+	d_fnend(3, NULL, "(info %p ifindex %d) = %p\n",
+		info, ifindex, wimax_dev);
+	return wimax_dev;
+}
+
+
+/*
+ * wimax_id_table_rm - Remove a gennetlink familiy ID / wimax_dev mapping
+ *
+ * @id: family ID to remove from the table
+ */
+void wimax_id_table_rm(struct wimax_dev *wimax_dev)
+{
+	spin_lock(&wimax_id_table_lock);
+	list_del_init(&wimax_dev->id_table_node);
+	spin_unlock(&wimax_id_table_lock);
+}
+
+
+/*
+ * Release the gennetlink family id / mapping table
+ *
+ * On debug, verify that the table is empty upon removal. We want the
+ * code always compiled, to ensure it doesn't bit rot. It will be
+ * compiled out if CONFIG_BUG is disabled.
+ */
+void wimax_id_table_release(void)
+{
+	struct wimax_dev *wimax_dev;
+
+#ifndef CONFIG_BUG
+	return;
+#endif
+	spin_lock(&wimax_id_table_lock);
+	list_for_each_entry(wimax_dev, &wimax_id_table, id_table_node) {
+		printk(KERN_ERR "BUG: %s wimax_dev %p ifindex %d not cleared\n",
+		       __func__, wimax_dev, wimax_dev->net_dev->ifindex);
+		WARN_ON(1);
+	}
+	spin_unlock(&wimax_id_table_lock);
+}
diff --git a/net/wimax/op-msg.c b/net/wimax/op-msg.c
new file mode 100644
index 00000000000..cb3b4ad5368
--- /dev/null
+++ b/net/wimax/op-msg.c
@@ -0,0 +1,421 @@
+/*
+ * Linux WiMAX
+ * Generic messaging interface between userspace and driver/device
+ *
+ *
+ * Copyright (C) 2007-2008 Intel Corporation <linux-wimax@intel.com>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This implements a direct communication channel between user space and
+ * the driver/device, by which free form messages can be sent back and
+ * forth.
+ *
+ * This is intended for device-specific features, vendor quirks, etc.
+ *
+ * See include/net/wimax.h
+ *
+ * GENERIC NETLINK ENCODING AND CAPACITY
+ *
+ * A destination "pipe name" is added to each message; it is up to the
+ * drivers to assign or use those names (if using them at all).
+ *
+ * Messages are encoded as a binary netlink attribute using nla_put()
+ * using type NLA_UNSPEC (as some versions of libnl still in
+ * deployment don't yet understand NLA_BINARY).
+ *
+ * The maximum capacity of this transport is PAGESIZE per message (so
+ * the actual payload will be bit smaller depending on the
+ * netlink/generic netlink attributes and headers).
+ *
+ * RECEPTION OF MESSAGES
+ *
+ * When a message is received from user space, it is passed verbatim
+ * to the driver calling wimax_dev->op_msg_from_user(). The return
+ * value from this function is passed back to user space as an ack
+ * over the generic netlink protocol.
+ *
+ * The stack doesn't do any processing or interpretation of these
+ * messages.
+ *
+ * SENDING MESSAGES
+ *
+ * Messages can be sent with wimax_msg().
+ *
+ * If the message delivery needs to happen on a different context to
+ * that of its creation, wimax_msg_alloc() can be used to get a
+ * pointer to the message that can be delivered later on with
+ * wimax_msg_send().
+ *
+ * ROADMAP
+ *
+ * wimax_gnl_doit_msg_from_user()    Process a message from user space
+ *   wimax_dev_get_by_genl_info()
+ *   wimax_dev->op_msg_from_user()   Delivery of message to the driver
+ *
+ * wimax_msg()                       Send a message to user space
+ *   wimax_msg_alloc()
+ *   wimax_msg_send()
+ */
+#include <linux/device.h>
+#include <net/genetlink.h>
+#include <linux/netdevice.h>
+#include <linux/wimax.h>
+#include <linux/security.h>
+#include "wimax-internal.h"
+
+
+#define D_SUBMODULE op_msg
+#include "debug-levels.h"
+
+
+/**
+ * wimax_msg_alloc - Create a new skb for sending a message to userspace
+ *
+ * @wimax_dev: WiMAX device descriptor
+ * @pipe_name: "named pipe" the message will be sent to
+ * @msg: pointer to the message data to send
+ * @size: size of the message to send (in bytes), including the header.
+ * @gfp_flags: flags for memory allocation.
+ *
+ * Returns: %0 if ok, negative errno code on error
+ *
+ * Description:
+ *
+ * Allocates an skb that will contain the message to send to user
+ * space over the messaging pipe and initializes it, copying the
+ * payload.
+ *
+ * Once this call is done, you can deliver it with
+ * wimax_msg_send().
+ *
+ * IMPORTANT:
+ *
+ * Don't use skb_push()/skb_pull()/skb_reserve() on the skb, as
+ * wimax_msg_send() depends on skb->data being placed at the
+ * beginning of the user message.
+ */
+struct sk_buff *wimax_msg_alloc(struct wimax_dev *wimax_dev,
+				const char *pipe_name,
+				const void *msg, size_t size,
+				gfp_t gfp_flags)
+{
+	int result;
+	struct device *dev = wimax_dev->net_dev->dev.parent;
+	size_t msg_size;
+	void *genl_msg;
+	struct sk_buff *skb;
+
+	msg_size = nla_total_size(size)
+		+ nla_total_size(sizeof(u32))
+		+ (pipe_name ? nla_total_size(strlen(pipe_name)) : 0);
+	result = -ENOMEM;
+	skb = genlmsg_new(msg_size, gfp_flags);
+	if (skb == NULL)
+		goto error_new;
+	genl_msg = genlmsg_put(skb, 0, 0, &wimax_gnl_family,
+			       0, WIMAX_GNL_OP_MSG_TO_USER);
+	if (genl_msg == NULL) {
+		dev_err(dev, "no memory to create generic netlink message\n");
+		goto error_genlmsg_put;
+	}
+	result = nla_put_u32(skb, WIMAX_GNL_MSG_IFIDX,
+			     wimax_dev->net_dev->ifindex);
+	if (result < 0) {
+		dev_err(dev, "no memory to add ifindex attribute\n");
+		goto error_nla_put;
+	}
+	if (pipe_name) {
+		result = nla_put_string(skb, WIMAX_GNL_MSG_PIPE_NAME,
+					pipe_name);
+		if (result < 0) {
+			dev_err(dev, "no memory to add pipe_name attribute\n");
+			goto error_nla_put;
+		}
+	}
+	result = nla_put(skb, WIMAX_GNL_MSG_DATA, size, msg);
+	if (result < 0) {
+		dev_err(dev, "no memory to add payload in attribute\n");
+		goto error_nla_put;
+	}
+	genlmsg_end(skb, genl_msg);
+	return skb;
+
+error_nla_put:
+error_genlmsg_put:
+error_new:
+	nlmsg_free(skb);
+	return ERR_PTR(result);
+
+}
+EXPORT_SYMBOL_GPL(wimax_msg_alloc);
+
+
+/**
+ * wimax_msg_data_len - Return a pointer and size of a message's payload
+ *
+ * @msg: Pointer to a message created with wimax_msg_alloc()
+ * @size: Pointer to where to store the message's size
+ *
+ * Returns the pointer to the message data.
+ */
+const void *wimax_msg_data_len(struct sk_buff *msg, size_t *size)
+{
+	struct nlmsghdr *nlh = (void *) msg->head;
+	struct nlattr *nla;
+
+	nla = nlmsg_find_attr(nlh, sizeof(struct genlmsghdr),
+			      WIMAX_GNL_MSG_DATA);
+	if (nla == NULL) {
+		printk(KERN_ERR "Cannot find attribute WIMAX_GNL_MSG_DATA\n");
+		return NULL;
+	}
+	*size = nla_len(nla);
+	return nla_data(nla);
+}
+EXPORT_SYMBOL_GPL(wimax_msg_data_len);
+
+
+/**
+ * wimax_msg_data - Return a pointer to a message's payload
+ *
+ * @msg: Pointer to a message created with wimax_msg_alloc()
+ */
+const void *wimax_msg_data(struct sk_buff *msg)
+{
+	struct nlmsghdr *nlh = (void *) msg->head;
+	struct nlattr *nla;
+
+	nla = nlmsg_find_attr(nlh, sizeof(struct genlmsghdr),
+			      WIMAX_GNL_MSG_DATA);
+	if (nla == NULL) {
+		printk(KERN_ERR "Cannot find attribute WIMAX_GNL_MSG_DATA\n");
+		return NULL;
+	}
+	return nla_data(nla);
+}
+EXPORT_SYMBOL_GPL(wimax_msg_data);
+
+
+/**
+ * wimax_msg_len - Return a message's payload length
+ *
+ * @msg: Pointer to a message created with wimax_msg_alloc()
+ */
+ssize_t wimax_msg_len(struct sk_buff *msg)
+{
+	struct nlmsghdr *nlh = (void *) msg->head;
+	struct nlattr *nla;
+
+	nla = nlmsg_find_attr(nlh, sizeof(struct genlmsghdr),
+			      WIMAX_GNL_MSG_DATA);
+	if (nla == NULL) {
+		printk(KERN_ERR "Cannot find attribute WIMAX_GNL_MSG_DATA\n");
+		return -EINVAL;
+	}
+	return nla_len(nla);
+}
+EXPORT_SYMBOL_GPL(wimax_msg_len);
+
+
+/**
+ * wimax_msg_send - Send a pre-allocated message to user space
+ *
+ * @wimax_dev: WiMAX device descriptor
+ *
+ * @skb: &struct sk_buff returned by wimax_msg_alloc(). Note the
+ *     ownership of @skb is transferred to this function.
+ *
+ * Returns: 0 if ok, < 0 errno code on error
+ *
+ * Description:
+ *
+ * Sends a free-form message that was preallocated with
+ * wimax_msg_alloc() and filled up.
+ *
+ * Assumes that once you pass an skb to this function for sending, it
+ * owns it and will release it when done (on success).
+ *
+ * IMPORTANT:
+ *
+ * Don't use skb_push()/skb_pull()/skb_reserve() on the skb, as
+ * wimax_msg_send() depends on skb->data being placed at the
+ * beginning of the user message.
+ */
+int wimax_msg_send(struct wimax_dev *wimax_dev, struct sk_buff *skb)
+{
+	int result;
+	struct device *dev = wimax_dev->net_dev->dev.parent;
+	void *msg = skb->data;
+	size_t size = skb->len;
+	might_sleep();
+
+	d_printf(1, dev, "CTX: wimax msg, %zu bytes\n", size);
+	d_dump(2, dev, msg, size);
+	result = genlmsg_multicast(skb, 0, wimax_gnl_mcg.id, GFP_KERNEL);
+	d_printf(1, dev, "CTX: genl multicast result %d\n", result);
+	if (result == -ESRCH)	/* Nobody connected, ignore it */
+		result = 0;	/* btw, the skb is freed already */
+	return result;
+}
+EXPORT_SYMBOL_GPL(wimax_msg_send);
+
+
+/**
+ * wimax_msg - Send a message to user space
+ *
+ * @wimax_dev: WiMAX device descriptor (properly referenced)
+ * @pipe_name: "named pipe" the message will be sent to
+ * @buf: pointer to the message to send.
+ * @size: size of the buffer pointed to by @buf (in bytes).
+ * @gfp_flags: flags for memory allocation.
+ *
+ * Returns: %0 if ok, negative errno code on error.
+ *
+ * Description:
+ *
+ * Sends a free-form message to user space on the device @wimax_dev.
+ *
+ * NOTES:
+ *
+ * Once the @skb is given to this function, who will own it and will
+ * release it when done (unless it returns error).
+ */
+int wimax_msg(struct wimax_dev *wimax_dev, const char *pipe_name,
+	      const void *buf, size_t size, gfp_t gfp_flags)
+{
+	int result = -ENOMEM;
+	struct sk_buff *skb;
+
+	skb = wimax_msg_alloc(wimax_dev, pipe_name, buf, size, gfp_flags);
+	if (skb == NULL)
+		goto error_msg_new;
+	result = wimax_msg_send(wimax_dev, skb);
+error_msg_new:
+	return result;
+}
+EXPORT_SYMBOL_GPL(wimax_msg);
+
+
+static const
+struct nla_policy wimax_gnl_msg_policy[WIMAX_GNL_ATTR_MAX + 1] = {
+	[WIMAX_GNL_MSG_IFIDX] = {
+		.type = NLA_U32,
+	},
+	[WIMAX_GNL_MSG_DATA] = {
+		.type = NLA_UNSPEC,	/* libnl doesn't grok BINARY yet */
+	},
+};
+
+
+/*
+ * Relays a message from user space to the driver
+ *
+ * The skb is passed to the driver-specific function with the netlink
+ * and generic netlink headers already stripped.
+ *
+ * This call will block while handling/relaying the message.
+ */
+static
+int wimax_gnl_doit_msg_from_user(struct sk_buff *skb, struct genl_info *info)
+{
+	int result, ifindex;
+	struct wimax_dev *wimax_dev;
+	struct device *dev;
+	struct nlmsghdr *nlh = info->nlhdr;
+	char *pipe_name;
+	void *msg_buf;
+	size_t msg_len;
+
+	might_sleep();
+	d_fnstart(3, NULL, "(skb %p info %p)\n", skb, info);
+	result = -ENODEV;
+	if (info->attrs[WIMAX_GNL_MSG_IFIDX] == NULL) {
+		printk(KERN_ERR "WIMAX_GNL_MSG_FROM_USER: can't find IFIDX "
+		       "attribute\n");
+		goto error_no_wimax_dev;
+	}
+	ifindex = nla_get_u32(info->attrs[WIMAX_GNL_MSG_IFIDX]);
+	wimax_dev = wimax_dev_get_by_genl_info(info, ifindex);
+	if (wimax_dev == NULL)
+		goto error_no_wimax_dev;
+	dev = wimax_dev_to_dev(wimax_dev);
+
+	/* Unpack arguments */
+	result = -EINVAL;
+	if (info->attrs[WIMAX_GNL_MSG_DATA] == NULL) {
+		dev_err(dev, "WIMAX_GNL_MSG_FROM_USER: can't find MSG_DATA "
+			"attribute\n");
+		goto error_no_data;
+	}
+	msg_buf = nla_data(info->attrs[WIMAX_GNL_MSG_DATA]);
+	msg_len = nla_len(info->attrs[WIMAX_GNL_MSG_DATA]);
+
+	if (info->attrs[WIMAX_GNL_MSG_PIPE_NAME] == NULL)
+		pipe_name = NULL;
+	else {
+		struct nlattr *attr = info->attrs[WIMAX_GNL_MSG_PIPE_NAME];
+		size_t attr_len = nla_len(attr);
+		/* libnl-1.1 does not yet support NLA_NUL_STRING */
+		result = -ENOMEM;
+		pipe_name = kstrndup(nla_data(attr), attr_len + 1, GFP_KERNEL);
+		if (pipe_name == NULL)
+			goto error_alloc;
+		pipe_name[attr_len] = 0;
+	}
+	mutex_lock(&wimax_dev->mutex);
+	result = wimax_dev_is_ready(wimax_dev);
+	if (result < 0)
+		goto error_not_ready;
+	result = -ENOSYS;
+	if (wimax_dev->op_msg_from_user == NULL)
+		goto error_noop;
+
+	d_printf(1, dev,
+		 "CRX: nlmsghdr len %u type %u flags 0x%04x seq 0x%x pid %u\n",
+		 nlh->nlmsg_len, nlh->nlmsg_type, nlh->nlmsg_flags,
+		 nlh->nlmsg_seq, nlh->nlmsg_pid);
+	d_printf(1, dev, "CRX: wimax message %zu bytes\n", msg_len);
+	d_dump(2, dev, msg_buf, msg_len);
+
+	result = wimax_dev->op_msg_from_user(wimax_dev, pipe_name,
+					     msg_buf, msg_len, info);
+error_noop:
+error_not_ready:
+	mutex_unlock(&wimax_dev->mutex);
+error_alloc:
+	kfree(pipe_name);
+error_no_data:
+	dev_put(wimax_dev->net_dev);
+error_no_wimax_dev:
+	d_fnend(3, NULL, "(skb %p info %p) = %d\n", skb, info, result);
+	return result;
+}
+
+
+/*
+ * Generic Netlink glue
+ */
+
+struct genl_ops wimax_gnl_msg_from_user = {
+	.cmd = WIMAX_GNL_OP_MSG_FROM_USER,
+	.flags = GENL_ADMIN_PERM,
+	.policy = wimax_gnl_msg_policy,
+	.doit = wimax_gnl_doit_msg_from_user,
+	.dumpit = NULL,
+};
+
diff --git a/net/wimax/op-reset.c b/net/wimax/op-reset.c
new file mode 100644
index 00000000000..ca269178c4d
--- /dev/null
+++ b/net/wimax/op-reset.c
@@ -0,0 +1,143 @@
+/*
+ * Linux WiMAX
+ * Implement and export a method for resetting a WiMAX device
+ *
+ *
+ * Copyright (C) 2008 Intel Corporation <linux-wimax@intel.com>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This implements a simple synchronous call to reset a WiMAX device.
+ *
+ * Resets aim at being warm, keeping the device handles active;
+ * however, when that fails, it falls back to a cold reset (that will
+ * disconnect and reconnect the device).
+ */
+
+#include <net/wimax.h>
+#include <net/genetlink.h>
+#include <linux/wimax.h>
+#include <linux/security.h>
+#include "wimax-internal.h"
+
+#define D_SUBMODULE op_reset
+#include "debug-levels.h"
+
+
+/**
+ * wimax_reset - Reset a WiMAX device
+ *
+ * @wimax_dev: WiMAX device descriptor
+ *
+ * Returns:
+ *
+ * %0 if ok and a warm reset was done (the device still exists in
+ * the system).
+ *
+ * -%ENODEV if a cold/bus reset had to be done (device has
+ * disconnected and reconnected, so current handle is not valid
+ * any more).
+ *
+ * -%EINVAL if the device is not even registered.
+ *
+ * Any other negative error code shall be considered as
+ * non-recoverable.
+ *
+ * Description:
+ *
+ * Called when wanting to reset the device for any reason. Device is
+ * taken back to power on status.
+ *
+ * This call blocks; on succesful return, the device has completed the
+ * reset process and is ready to operate.
+ */
+int wimax_reset(struct wimax_dev *wimax_dev)
+{
+	int result = -EINVAL;
+	struct device *dev = wimax_dev_to_dev(wimax_dev);
+	enum wimax_st state;
+
+	might_sleep();
+	d_fnstart(3, dev, "(wimax_dev %p)\n", wimax_dev);
+	mutex_lock(&wimax_dev->mutex);
+	dev_hold(wimax_dev->net_dev);
+	state = wimax_dev->state;
+	mutex_unlock(&wimax_dev->mutex);
+
+	if (state >= WIMAX_ST_DOWN) {
+		mutex_lock(&wimax_dev->mutex_reset);
+		result = wimax_dev->op_reset(wimax_dev);
+		mutex_unlock(&wimax_dev->mutex_reset);
+	}
+	dev_put(wimax_dev->net_dev);
+
+	d_fnend(3, dev, "(wimax_dev %p) = %d\n", wimax_dev, result);
+	return result;
+}
+EXPORT_SYMBOL(wimax_reset);
+
+
+static const
+struct nla_policy wimax_gnl_reset_policy[WIMAX_GNL_ATTR_MAX + 1] = {
+	[WIMAX_GNL_RESET_IFIDX] = {
+		.type = NLA_U32,
+	},
+};
+
+
+/*
+ * Exporting to user space over generic netlink
+ *
+ * Parse the reset command from user space, return error code.
+ *
+ * No attributes.
+ */
+static
+int wimax_gnl_doit_reset(struct sk_buff *skb, struct genl_info *info)
+{
+	int result, ifindex;
+	struct wimax_dev *wimax_dev;
+	struct device *dev;
+
+	d_fnstart(3, NULL, "(skb %p info %p)\n", skb, info);
+	result = -ENODEV;
+	if (info->attrs[WIMAX_GNL_RESET_IFIDX] == NULL) {
+		printk(KERN_ERR "WIMAX_GNL_OP_RFKILL: can't find IFIDX "
+			"attribute\n");
+		goto error_no_wimax_dev;
+	}
+	ifindex = nla_get_u32(info->attrs[WIMAX_GNL_RESET_IFIDX]);
+	wimax_dev = wimax_dev_get_by_genl_info(info, ifindex);
+	if (wimax_dev == NULL)
+		goto error_no_wimax_dev;
+	dev = wimax_dev_to_dev(wimax_dev);
+	/* Execute the operation and send the result back to user space */
+	result = wimax_reset(wimax_dev);
+	dev_put(wimax_dev->net_dev);
+error_no_wimax_dev:
+	d_fnend(3, NULL, "(skb %p info %p) = %d\n", skb, info, result);
+	return result;
+}
+
+
+struct genl_ops wimax_gnl_reset = {
+	.cmd = WIMAX_GNL_OP_RESET,
+	.flags = GENL_ADMIN_PERM,
+	.policy = wimax_gnl_reset_policy,
+	.doit = wimax_gnl_doit_reset,
+	.dumpit = NULL,
+};
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
new file mode 100644
index 00000000000..2b75aee0421
--- /dev/null
+++ b/net/wimax/op-rfkill.c
@@ -0,0 +1,532 @@
+/*
+ * Linux WiMAX
+ * RF-kill framework integration
+ *
+ *
+ * Copyright (C) 2008 Intel Corporation <linux-wimax@intel.com>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This integrates into the Linux Kernel rfkill susbystem so that the
+ * drivers just have to do the bare minimal work, which is providing a
+ * method to set the software RF-Kill switch and to report changes in
+ * the software and hardware switch status.
+ *
+ * A non-polled generic rfkill device is embedded into the WiMAX
+ * subsystem's representation of a device.
+ *
+ * FIXME: Need polled support? use a timer or add the implementation
+ *     to the stack.
+ *
+ * All device drivers have to do is after wimax_dev_init(), call
+ * wimax_report_rfkill_hw() and wimax_report_rfkill_sw() to update
+ * initial state and then every time it changes. See wimax.h:struct
+ * wimax_dev for more information.
+ *
+ * ROADMAP
+ *
+ * wimax_gnl_doit_rfkill()      User space calling wimax_rfkill()
+ *   wimax_rfkill()             Kernel calling wimax_rfkill()
+ *     __wimax_rf_toggle_radio()
+ *
+ * wimax_rfkill_toggle_radio()  RF-Kill subsytem calling
+ *   __wimax_rf_toggle_radio()
+ *
+ * __wimax_rf_toggle_radio()
+ *   wimax_dev->op_rfkill_sw_toggle() Driver backend
+ *   __wimax_state_change()
+ *
+ * wimax_report_rfkill_sw()     Driver reports state change
+ *   __wimax_state_change()
+ *
+ * wimax_report_rfkill_hw()     Driver reports state change
+ *   __wimax_state_change()
+ *
+ * wimax_rfkill_add()           Initialize/shutdown rfkill support
+ * wimax_rfkill_rm()            [called by wimax_dev_add/rm()]
+ */
+
+#include <net/wimax.h>
+#include <net/genetlink.h>
+#include <linux/wimax.h>
+#include <linux/security.h>
+#include <linux/rfkill.h>
+#include <linux/input.h>
+#include "wimax-internal.h"
+
+#define D_SUBMODULE op_rfkill
+#include "debug-levels.h"
+
+#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
+
+
+/**
+ * wimax_report_rfkill_hw - Reports changes in the hardware RF switch
+ *
+ * @wimax_dev: WiMAX device descriptor
+ *
+ * @state: New state of the RF Kill switch. %WIMAX_RF_ON radio on,
+ *     %WIMAX_RF_OFF radio off.
+ *
+ * When the device detects a change in the state of thehardware RF
+ * switch, it must call this function to let the WiMAX kernel stack
+ * know that the state has changed so it can be properly propagated.
+ *
+ * The WiMAX stack caches the state (the driver doesn't need to). As
+ * well, as the change is propagated it will come back as a request to
+ * change the software state to mirror the hardware state.
+ *
+ * If the device doesn't have a hardware kill switch, just report
+ * it on initialization as always on (%WIMAX_RF_ON, radio on).
+ */
+void wimax_report_rfkill_hw(struct wimax_dev *wimax_dev,
+			    enum wimax_rf_state state)
+{
+	int result;
+	struct device *dev = wimax_dev_to_dev(wimax_dev);
+	enum wimax_st wimax_state;
+	enum rfkill_state rfkill_state;
+
+	d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state);
+	BUG_ON(state == WIMAX_RF_QUERY);
+	BUG_ON(state != WIMAX_RF_ON && state != WIMAX_RF_OFF);
+
+	mutex_lock(&wimax_dev->mutex);
+	result = wimax_dev_is_ready(wimax_dev);
+	if (result < 0)
+		goto error_not_ready;
+
+	if (state != wimax_dev->rf_hw) {
+		wimax_dev->rf_hw = state;
+		rfkill_state = state == WIMAX_RF_ON ?
+			RFKILL_STATE_OFF : RFKILL_STATE_ON;
+		if (wimax_dev->rf_hw == WIMAX_RF_ON
+		    && wimax_dev->rf_sw == WIMAX_RF_ON)
+			wimax_state = WIMAX_ST_READY;
+		else
+			wimax_state = WIMAX_ST_RADIO_OFF;
+		__wimax_state_change(wimax_dev, wimax_state);
+		input_report_key(wimax_dev->rfkill_input, KEY_WIMAX,
+				 rfkill_state);
+	}
+error_not_ready:
+	mutex_unlock(&wimax_dev->mutex);
+	d_fnend(3, dev, "(wimax_dev %p state %u) = void [%d]\n",
+		wimax_dev, state, result);
+}
+EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
+
+
+/**
+ * wimax_report_rfkill_sw - Reports changes in the software RF switch
+ *
+ * @wimax_dev: WiMAX device descriptor
+ *
+ * @state: New state of the RF kill switch. %WIMAX_RF_ON radio on,
+ *     %WIMAX_RF_OFF radio off.
+ *
+ * Reports changes in the software RF switch state to the the WiMAX
+ * stack.
+ *
+ * The main use is during initialization, so the driver can query the
+ * device for its current software radio kill switch state and feed it
+ * to the system.
+ *
+ * On the side, the device does not change the software state by
+ * itself. In practice, this can happen, as the device might decide to
+ * switch (in software) the radio off for different reasons.
+ */
+void wimax_report_rfkill_sw(struct wimax_dev *wimax_dev,
+			    enum wimax_rf_state state)
+{
+	int result;
+	struct device *dev = wimax_dev_to_dev(wimax_dev);
+	enum wimax_st wimax_state;
+
+	d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state);
+	BUG_ON(state == WIMAX_RF_QUERY);
+	BUG_ON(state != WIMAX_RF_ON && state != WIMAX_RF_OFF);
+
+	mutex_lock(&wimax_dev->mutex);
+	result = wimax_dev_is_ready(wimax_dev);
+	if (result < 0)
+		goto error_not_ready;
+
+	if (state != wimax_dev->rf_sw) {
+		wimax_dev->rf_sw = state;
+		if (wimax_dev->rf_hw == WIMAX_RF_ON
+		    && wimax_dev->rf_sw == WIMAX_RF_ON)
+			wimax_state = WIMAX_ST_READY;
+		else
+			wimax_state = WIMAX_ST_RADIO_OFF;
+		__wimax_state_change(wimax_dev, wimax_state);
+	}
+error_not_ready:
+	mutex_unlock(&wimax_dev->mutex);
+	d_fnend(3, dev, "(wimax_dev %p state %u) = void [%d]\n",
+		wimax_dev, state, result);
+}
+EXPORT_SYMBOL_GPL(wimax_report_rfkill_sw);
+
+
+/*
+ * Callback for the RF Kill toggle operation
+ *
+ * This function is called by:
+ *
+ * - The rfkill subsystem when the RF-Kill key is pressed in the
+ *   hardware and the driver notifies through
+ *   wimax_report_rfkill_hw(). The rfkill subsystem ends up calling back
+ *   here so the software RF Kill switch state is changed to reflect
+ *   the hardware switch state.
+ *
+ * - When the user sets the state through sysfs' rfkill/state file
+ *
+ * - When the user calls wimax_rfkill().
+ *
+ * This call blocks!
+ *
+ * WARNING! When we call rfkill_unregister(), this will be called with
+ * state 0!
+ *
+ * WARNING: wimax_dev must be locked
+ */
+static
+int __wimax_rf_toggle_radio(struct wimax_dev *wimax_dev,
+			    enum wimax_rf_state state)
+{
+	int result = 0;
+	struct device *dev = wimax_dev_to_dev(wimax_dev);
+	enum wimax_st wimax_state;
+
+	might_sleep();
+	d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state);
+	if (wimax_dev->rf_sw == state)
+		goto out_no_change;
+	if (wimax_dev->op_rfkill_sw_toggle != NULL)
+		result = wimax_dev->op_rfkill_sw_toggle(wimax_dev, state);
+	else if (state == WIMAX_RF_OFF)	/* No op? can't turn off */
+		result = -ENXIO;
+	else				/* No op? can turn on */
+		result = 0;		/* should never happen tho */
+	if (result >= 0) {
+		result = 0;
+		wimax_dev->rf_sw = state;
+		wimax_state = state == WIMAX_RF_ON ?
+			WIMAX_ST_READY : WIMAX_ST_RADIO_OFF;
+		__wimax_state_change(wimax_dev, wimax_state);
+	}
+out_no_change:
+	d_fnend(3, dev, "(wimax_dev %p state %u) = %d\n",
+		wimax_dev, state, result);
+	return result;
+}
+
+
+/*
+ * Translate from rfkill state to wimax state
+ *
+ * NOTE: Special state handling rules here
+ *
+ *     Just pretend the call didn't happen if we are in a state where
+ *     we know for sure it cannot be handled (WIMAX_ST_DOWN or
+ *     __WIMAX_ST_QUIESCING). rfkill() needs it to register and
+ *     unregister, as it will run this path.
+ *
+ * NOTE: This call will block until the operation is completed.
+ */
+static
+int wimax_rfkill_toggle_radio(void *data, enum rfkill_state state)
+{
+	int result;
+	struct wimax_dev *wimax_dev = data;
+	struct device *dev = wimax_dev_to_dev(wimax_dev);
+	enum wimax_rf_state rf_state;
+
+	d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state);
+	switch (state) {
+	case RFKILL_STATE_ON:
+		rf_state = WIMAX_RF_OFF;
+		break;
+	case RFKILL_STATE_OFF:
+		rf_state = WIMAX_RF_ON;
+		break;
+	default:
+		BUG();
+	}
+	mutex_lock(&wimax_dev->mutex);
+	if (wimax_dev->state <= __WIMAX_ST_QUIESCING)
+		result = 0;	/* just pretend it didn't happen */
+	else
+		result = __wimax_rf_toggle_radio(wimax_dev, rf_state);
+	mutex_unlock(&wimax_dev->mutex);
+	d_fnend(3, dev, "(wimax_dev %p state %u) = %d\n",
+		wimax_dev, state, result);
+	return result;
+}
+
+
+/**
+ * wimax_rfkill - Set the software RF switch state for a WiMAX device
+ *
+ * @wimax_dev: WiMAX device descriptor
+ *
+ * @state: New RF state.
+ *
+ * Returns:
+ *
+ * >= 0 toggle state if ok, < 0 errno code on error. The toggle state
+ * is returned as a bitmap, bit 0 being the hardware RF state, bit 1
+ * the software RF state.
+ *
+ * 0 means disabled (%WIMAX_RF_ON, radio on), 1 means enabled radio
+ * off (%WIMAX_RF_OFF).
+ *
+ * Description:
+ *
+ * Called by the user when he wants to request the WiMAX radio to be
+ * switched on (%WIMAX_RF_ON) or off (%WIMAX_RF_OFF). With
+ * %WIMAX_RF_QUERY, just the current state is returned.
+ *
+ * NOTE:
+ *
+ * This call will block until the operation is complete.
+ */
+int wimax_rfkill(struct wimax_dev *wimax_dev, enum wimax_rf_state state)
+{
+	int result;
+	struct device *dev = wimax_dev_to_dev(wimax_dev);
+
+	d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state);
+	mutex_lock(&wimax_dev->mutex);
+	result = wimax_dev_is_ready(wimax_dev);
+	if (result < 0)
+		goto error_not_ready;
+	switch (state) {
+	case WIMAX_RF_ON:
+	case WIMAX_RF_OFF:
+		result = __wimax_rf_toggle_radio(wimax_dev, state);
+		if (result < 0)
+			goto error;
+		break;
+	case WIMAX_RF_QUERY:
+		break;
+	default:
+		result = -EINVAL;
+		goto error;
+	}
+	result = wimax_dev->rf_sw << 1 | wimax_dev->rf_hw;
+error:
+error_not_ready:
+	mutex_unlock(&wimax_dev->mutex);
+	d_fnend(3, dev, "(wimax_dev %p state %u) = %d\n",
+		wimax_dev, state, result);
+	return result;
+}
+EXPORT_SYMBOL(wimax_rfkill);
+
+
+/*
+ * Register a new WiMAX device's RF Kill support
+ *
+ * WARNING: wimax_dev->mutex must be unlocked
+ */
+int wimax_rfkill_add(struct wimax_dev *wimax_dev)
+{
+	int result;
+	struct rfkill *rfkill;
+	struct input_dev *input_dev;
+	struct device *dev = wimax_dev_to_dev(wimax_dev);
+
+	d_fnstart(3, dev, "(wimax_dev %p)\n", wimax_dev);
+	/* Initialize RF Kill */
+	result = -ENOMEM;
+	rfkill = rfkill_allocate(dev, RFKILL_TYPE_WIMAX);
+	if (rfkill == NULL)
+		goto error_rfkill_allocate;
+	wimax_dev->rfkill = rfkill;
+
+	rfkill->name = wimax_dev->name;
+	rfkill->state = RFKILL_STATE_OFF;
+	rfkill->data = wimax_dev;
+	rfkill->toggle_radio = wimax_rfkill_toggle_radio;
+	rfkill->user_claim_unsupported = 1;
+
+	/* Initialize the input device for the hw key */
+	input_dev = input_allocate_device();
+	if (input_dev == NULL)
+		goto error_input_allocate;
+	wimax_dev->rfkill_input = input_dev;
+	d_printf(1, dev, "rfkill %p input %p\n", rfkill, input_dev);
+
+	input_dev->name = wimax_dev->name;
+	/* FIXME: get a real device bus ID and stuff? do we care? */
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0xffff;
+	input_dev->evbit[0] = BIT(EV_KEY);
+	set_bit(KEY_WIMAX, input_dev->keybit);
+
+	/* Register both */
+	result = input_register_device(wimax_dev->rfkill_input);
+	if (result < 0)
+		goto error_input_register;
+	result = rfkill_register(wimax_dev->rfkill);
+	if (result < 0)
+		goto error_rfkill_register;
+
+	/* If there is no SW toggle op, SW RFKill is always on */
+	if (wimax_dev->op_rfkill_sw_toggle == NULL)
+		wimax_dev->rf_sw = WIMAX_RF_ON;
+
+	d_fnend(3, dev, "(wimax_dev %p) = 0\n", wimax_dev);
+	return 0;
+
+	/* if rfkill_register() suceeds, can't use rfkill_free() any
+	 * more, only rfkill_unregister() [it owns the refcount]; with
+	 * the input device we have the same issue--hence the if. */
+error_rfkill_register:
+	input_unregister_device(wimax_dev->rfkill_input);
+	wimax_dev->rfkill_input = NULL;
+error_input_register:
+	if (wimax_dev->rfkill_input)
+		input_free_device(wimax_dev->rfkill_input);
+error_input_allocate:
+	rfkill_free(wimax_dev->rfkill);
+error_rfkill_allocate:
+	d_fnend(3, dev, "(wimax_dev %p) = %d\n", wimax_dev, result);
+	return result;
+}
+
+
+/*
+ * Deregister a WiMAX device's RF Kill support
+ *
+ * Ick, we can't call rfkill_free() after rfkill_unregister()...oh
+ * well.
+ *
+ * WARNING: wimax_dev->mutex must be unlocked
+ */
+void wimax_rfkill_rm(struct wimax_dev *wimax_dev)
+{
+	struct device *dev = wimax_dev_to_dev(wimax_dev);
+	d_fnstart(3, dev, "(wimax_dev %p)\n", wimax_dev);
+	rfkill_unregister(wimax_dev->rfkill);	/* frees */
+	input_unregister_device(wimax_dev->rfkill_input);
+	d_fnend(3, dev, "(wimax_dev %p)\n", wimax_dev);
+}
+
+
+#else /* #ifdef CONFIG_RFKILL */
+
+void wimax_report_rfkill_hw(struct wimax_dev *wimax_dev,
+			    enum wimax_rf_state state)
+{
+}
+EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
+
+void wimax_report_rfkill_sw(struct wimax_dev *wimax_dev,
+			    enum wimax_rf_state state)
+{
+}
+EXPORT_SYMBOL_GPL(wimax_report_rfkill_sw);
+
+int wimax_rfkill(struct wimax_dev *wimax_dev,
+		 enum wimax_rf_state state)
+{
+	return WIMAX_RF_ON << 1 | WIMAX_RF_ON;
+}
+EXPORT_SYMBOL_GPL(wimax_rfkill);
+
+int wimax_rfkill_add(struct wimax_dev *wimax_dev)
+{
+	return 0;
+}
+
+void wimax_rfkill_rm(struct wimax_dev *wimax_dev)
+{
+}
+
+#endif /* #ifdef CONFIG_RFKILL */
+
+
+/*
+ * Exporting to user space over generic netlink
+ *
+ * Parse the rfkill command from user space, return a combination
+ * value that describe the states of the different toggles.
+ *
+ * Only one attribute: the new state requested (on, off or no change,
+ * just query).
+ */
+
+static const
+struct nla_policy wimax_gnl_rfkill_policy[WIMAX_GNL_ATTR_MAX + 1] = {
+	[WIMAX_GNL_RFKILL_IFIDX] = {
+		.type = NLA_U32,
+	},
+	[WIMAX_GNL_RFKILL_STATE] = {
+		.type = NLA_U32		/* enum wimax_rf_state */
+	},
+};
+
+
+static
+int wimax_gnl_doit_rfkill(struct sk_buff *skb, struct genl_info *info)
+{
+	int result, ifindex;
+	struct wimax_dev *wimax_dev;
+	struct device *dev;
+	enum wimax_rf_state new_state;
+
+	d_fnstart(3, NULL, "(skb %p info %p)\n", skb, info);
+	result = -ENODEV;
+	if (info->attrs[WIMAX_GNL_RFKILL_IFIDX] == NULL) {
+		printk(KERN_ERR "WIMAX_GNL_OP_RFKILL: can't find IFIDX "
+			"attribute\n");
+		goto error_no_wimax_dev;
+	}
+	ifindex = nla_get_u32(info->attrs[WIMAX_GNL_RFKILL_IFIDX]);
+	wimax_dev = wimax_dev_get_by_genl_info(info, ifindex);
+	if (wimax_dev == NULL)
+		goto error_no_wimax_dev;
+	dev = wimax_dev_to_dev(wimax_dev);
+	result = -EINVAL;
+	if (info->attrs[WIMAX_GNL_RFKILL_STATE] == NULL) {
+		dev_err(dev, "WIMAX_GNL_RFKILL: can't find RFKILL_STATE "
+			"attribute\n");
+		goto error_no_pid;
+	}
+	new_state = nla_get_u32(info->attrs[WIMAX_GNL_RFKILL_STATE]);
+
+	/* Execute the operation and send the result back to user space */
+	result = wimax_rfkill(wimax_dev, new_state);
+error_no_pid:
+	dev_put(wimax_dev->net_dev);
+error_no_wimax_dev:
+	d_fnend(3, NULL, "(skb %p info %p) = %d\n", skb, info, result);
+	return result;
+}
+
+
+struct genl_ops wimax_gnl_rfkill = {
+	.cmd = WIMAX_GNL_OP_RFKILL,
+	.flags = GENL_ADMIN_PERM,
+	.policy = wimax_gnl_rfkill_policy,
+	.doit = wimax_gnl_doit_rfkill,
+	.dumpit = NULL,
+};
+
diff --git a/net/wimax/stack.c b/net/wimax/stack.c
new file mode 100644
index 00000000000..d4da92f8981
--- /dev/null
+++ b/net/wimax/stack.c
@@ -0,0 +1,599 @@
+/*
+ * Linux WiMAX
+ * Initialization, addition and removal of wimax devices
+ *
+ *
+ * Copyright (C) 2005-2006 Intel Corporation <linux-wimax@intel.com>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This implements:
+ *
+ *   - basic life cycle of 'struct wimax_dev' [wimax_dev_*()]; on
+ *     addition/registration initialize all subfields and allocate
+ *     generic netlink resources for user space communication. On
+ *     removal/unregistration, undo all that.
+ *
+ *   - device state machine [wimax_state_change()] and support to send
+ *     reports to user space when the state changes
+ *     [wimax_gnl_re_state_change*()].
+ *
+ * See include/net/wimax.h for rationales and design.
+ *
+ * ROADMAP
+ *
+ * [__]wimax_state_change()     Called by drivers to update device's state
+ *   wimax_gnl_re_state_change_alloc()
+ *   wimax_gnl_re_state_change_send()
+ *
+ * wimax_dev_init()	        Init a device
+ * wimax_dev_add()              Register
+ *   wimax_rfkill_add()
+ *   wimax_gnl_add()            Register all the generic netlink resources.
+ *   wimax_id_table_add()
+ * wimax_dev_rm()               Unregister
+ *   wimax_id_table_rm()
+ *   wimax_gnl_rm()
+ *   wimax_rfkill_rm()
+ */
+#include <linux/device.h>
+#include <net/genetlink.h>
+#include <linux/netdevice.h>
+#include <linux/wimax.h>
+#include "wimax-internal.h"
+
+
+#define D_SUBMODULE stack
+#include "debug-levels.h"
+
+/*
+ * Authoritative source for the RE_STATE_CHANGE attribute policy
+ *
+ * We don't really use it here, but /me likes to keep the definition
+ * close to where the data is generated.
+ */
+/*
+static const
+struct nla_policy wimax_gnl_re_status_change[WIMAX_GNL_ATTR_MAX + 1] = {
+	[WIMAX_GNL_STCH_STATE_OLD] = { .type = NLA_U8 },
+	[WIMAX_GNL_STCH_STATE_NEW] = { .type = NLA_U8 },
+};
+*/
+
+
+/*
+ * Allocate a Report State Change message
+ *
+ * @header: save it, you need it for _send()
+ *
+ * Creates and fills a basic state change message; different code
+ * paths can then add more attributes to the message as needed.
+ *
+ * Use wimax_gnl_re_state_change_send() to send the returned skb.
+ *
+ * Returns: skb with the genl message if ok, IS_ERR() ptr on error
+ *     with an errno code.
+ */
+static
+struct sk_buff *wimax_gnl_re_state_change_alloc(
+	struct wimax_dev *wimax_dev,
+	enum wimax_st new_state, enum wimax_st old_state,
+	void **header)
+{
+	int result;
+	struct device *dev = wimax_dev_to_dev(wimax_dev);
+	void *data;
+	struct sk_buff *report_skb;
+
+	d_fnstart(3, dev, "(wimax_dev %p new_state %u old_state %u)\n",
+		  wimax_dev, new_state, old_state);
+	result = -ENOMEM;
+	report_skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (report_skb == NULL) {
+		dev_err(dev, "RE_STCH: can't create message\n");
+		goto error_new;
+	}
+	data = genlmsg_put(report_skb, 0, wimax_gnl_mcg.id, &wimax_gnl_family,
+			   0, WIMAX_GNL_RE_STATE_CHANGE);
+	if (data == NULL) {
+		dev_err(dev, "RE_STCH: can't put data into message\n");
+		goto error_put;
+	}
+	*header = data;
+
+	result = nla_put_u8(report_skb, WIMAX_GNL_STCH_STATE_OLD, old_state);
+	if (result < 0) {
+		dev_err(dev, "RE_STCH: Error adding OLD attr: %d\n", result);
+		goto error_put;
+	}
+	result = nla_put_u8(report_skb, WIMAX_GNL_STCH_STATE_NEW, new_state);
+	if (result < 0) {
+		dev_err(dev, "RE_STCH: Error adding NEW attr: %d\n", result);
+		goto error_put;
+	}
+	result = nla_put_u32(report_skb, WIMAX_GNL_STCH_IFIDX,
+			     wimax_dev->net_dev->ifindex);
+	if (result < 0) {
+		dev_err(dev, "RE_STCH: Error adding IFINDEX attribute\n");
+		goto error_put;
+	}
+	d_fnend(3, dev, "(wimax_dev %p new_state %u old_state %u) = %p\n",
+		wimax_dev, new_state, old_state, report_skb);
+	return report_skb;
+
+error_put:
+	nlmsg_free(report_skb);
+error_new:
+	d_fnend(3, dev, "(wimax_dev %p new_state %u old_state %u) = %d\n",
+		wimax_dev, new_state, old_state, result);
+	return ERR_PTR(result);
+}
+
+
+/*
+ * Send a Report State Change message (as created with _alloc).
+ *
+ * @report_skb: as returned by wimax_gnl_re_state_change_alloc()
+ * @header: as returned by wimax_gnl_re_state_change_alloc()
+ *
+ * Returns: 0 if ok, < 0 errno code on error.
+ *
+ * If the message is  NULL, pretend it didn't happen.
+ */
+static
+int wimax_gnl_re_state_change_send(
+	struct wimax_dev *wimax_dev, struct sk_buff *report_skb,
+	void *header)
+{
+	int result = 0;
+	struct device *dev = wimax_dev_to_dev(wimax_dev);
+	d_fnstart(3, dev, "(wimax_dev %p report_skb %p)\n",
+		  wimax_dev, report_skb);
+	if (report_skb == NULL)
+		goto out;
+	genlmsg_end(report_skb, header);
+	result = genlmsg_multicast(report_skb, 0, wimax_gnl_mcg.id, GFP_KERNEL);
+	if (result == -ESRCH)	/* Nobody connected, ignore it */
+		result = 0;	/* btw, the skb is freed already */
+	if (result < 0) {
+		dev_err(dev, "RE_STCH: Error sending: %d\n", result);
+		nlmsg_free(report_skb);
+	}
+out:
+	d_fnend(3, dev, "(wimax_dev %p report_skb %p) = %d\n",
+		wimax_dev, report_skb, result);
+	return result;
+}
+
+
+static
+void __check_new_state(enum wimax_st old_state, enum wimax_st new_state,
+		       unsigned allowed_states_bm)
+{
+	if (WARN_ON(((1 << new_state) & allowed_states_bm) == 0)) {
+		printk(KERN_ERR "SW BUG! Forbidden state change %u -> %u\n",
+			old_state, new_state);
+	}
+}
+
+
+/*
+ * Set the current state of a WiMAX device [unlocking version of
+ * wimax_state_change().
+ */
+void __wimax_state_change(struct wimax_dev *wimax_dev, enum wimax_st new_state)
+{
+	struct device *dev = wimax_dev_to_dev(wimax_dev);
+	enum wimax_st old_state = wimax_dev->state;
+	struct sk_buff *stch_skb;
+	void *header;
+
+	d_fnstart(3, dev, "(wimax_dev %p new_state %u [old %u])\n",
+		  wimax_dev, new_state, old_state);
+
+	if (WARN_ON(new_state >= __WIMAX_ST_INVALID)) {
+		dev_err(dev, "SW BUG: requesting invalid state %u\n",
+			new_state);
+		goto out;
+	}
+	if (old_state == new_state)
+		goto out;
+	header = NULL;	/* gcc complains? can't grok why */
+	stch_skb = wimax_gnl_re_state_change_alloc(
+		wimax_dev, new_state, old_state, &header);
+
+	/* Verify the state transition and do exit-from-state actions */
+	switch (old_state) {
+	case __WIMAX_ST_NULL:
+		__check_new_state(old_state, new_state,
+				  1 << WIMAX_ST_DOWN);
+		break;
+	case WIMAX_ST_DOWN:
+		__check_new_state(old_state, new_state,
+				  1 << __WIMAX_ST_QUIESCING
+				  | 1 << WIMAX_ST_UNINITIALIZED
+				  | 1 << WIMAX_ST_RADIO_OFF);
+		break;
+	case __WIMAX_ST_QUIESCING:
+		__check_new_state(old_state, new_state, 1 << WIMAX_ST_DOWN);
+		break;
+	case WIMAX_ST_UNINITIALIZED:
+		__check_new_state(old_state, new_state,
+				  1 << __WIMAX_ST_QUIESCING
+				  | 1 << WIMAX_ST_RADIO_OFF);
+		break;
+	case WIMAX_ST_RADIO_OFF:
+		__check_new_state(old_state, new_state,
+				  1 << __WIMAX_ST_QUIESCING
+				  | 1 << WIMAX_ST_READY);
+		break;
+	case WIMAX_ST_READY:
+		__check_new_state(old_state, new_state,
+				  1 << __WIMAX_ST_QUIESCING
+				  | 1 << WIMAX_ST_RADIO_OFF
+				  | 1 << WIMAX_ST_SCANNING
+				  | 1 << WIMAX_ST_CONNECTING
+				  | 1 << WIMAX_ST_CONNECTED);
+		break;
+	case WIMAX_ST_SCANNING:
+		__check_new_state(old_state, new_state,
+				  1 << __WIMAX_ST_QUIESCING
+				  | 1 << WIMAX_ST_RADIO_OFF
+				  | 1 << WIMAX_ST_READY
+				  | 1 << WIMAX_ST_CONNECTING
+				  | 1 << WIMAX_ST_CONNECTED);
+		break;
+	case WIMAX_ST_CONNECTING:
+		__check_new_state(old_state, new_state,
+				  1 << __WIMAX_ST_QUIESCING
+				  | 1 << WIMAX_ST_RADIO_OFF
+				  | 1 << WIMAX_ST_READY
+				  | 1 << WIMAX_ST_SCANNING
+				  | 1 << WIMAX_ST_CONNECTED);
+		break;
+	case WIMAX_ST_CONNECTED:
+		__check_new_state(old_state, new_state,
+				  1 << __WIMAX_ST_QUIESCING
+				  | 1 << WIMAX_ST_RADIO_OFF
+				  | 1 << WIMAX_ST_READY);
+		netif_tx_disable(wimax_dev->net_dev);
+		netif_carrier_off(wimax_dev->net_dev);
+		break;
+	case __WIMAX_ST_INVALID:
+	default:
+		dev_err(dev, "SW BUG: wimax_dev %p is in unknown state %u\n",
+			wimax_dev, wimax_dev->state);
+		WARN_ON(1);
+		goto out;
+	}
+
+	/* Execute the actions of entry to the new state */
+	switch (new_state) {
+	case __WIMAX_ST_NULL:
+		dev_err(dev, "SW BUG: wimax_dev %p entering NULL state "
+			"from %u\n", wimax_dev, wimax_dev->state);
+		WARN_ON(1);		/* Nobody can enter this state */
+		break;
+	case WIMAX_ST_DOWN:
+		break;
+	case __WIMAX_ST_QUIESCING:
+		break;
+	case WIMAX_ST_UNINITIALIZED:
+		break;
+	case WIMAX_ST_RADIO_OFF:
+		break;
+	case WIMAX_ST_READY:
+		break;
+	case WIMAX_ST_SCANNING:
+		break;
+	case WIMAX_ST_CONNECTING:
+		break;
+	case WIMAX_ST_CONNECTED:
+		netif_carrier_on(wimax_dev->net_dev);
+		netif_wake_queue(wimax_dev->net_dev);
+		break;
+	case __WIMAX_ST_INVALID:
+	default:
+		BUG();
+	}
+	__wimax_state_set(wimax_dev, new_state);
+	if (stch_skb)
+		wimax_gnl_re_state_change_send(wimax_dev, stch_skb, header);
+out:
+	d_fnend(3, dev, "(wimax_dev %p new_state %u [old %u]) = void\n",
+		wimax_dev, new_state, old_state);
+	return;
+}
+
+
+/**
+ * wimax_state_change - Set the current state of a WiMAX device
+ *
+ * @wimax_dev: WiMAX device descriptor (properly referenced)
+ * @new_state: New state to switch to
+ *
+ * This implements the state changes for the wimax devices. It will
+ *
+ * - verify that the state transition is legal (for now it'll just
+ *   print a warning if not) according to the table in
+ *   linux/wimax.h's documentation for 'enum wimax_st'.
+ *
+ * - perform the actions needed for leaving the current state and
+ *   whichever are needed for entering the new state.
+ *
+ * - issue a report to user space indicating the new state (and an
+ *   optional payload with information about the new state).
+ *
+ * NOTE: @wimax_dev must be locked
+ */
+void wimax_state_change(struct wimax_dev *wimax_dev, enum wimax_st new_state)
+{
+	mutex_lock(&wimax_dev->mutex);
+	__wimax_state_change(wimax_dev, new_state);
+	mutex_unlock(&wimax_dev->mutex);
+	return;
+}
+EXPORT_SYMBOL_GPL(wimax_state_change);
+
+
+/**
+ * wimax_state_get() - Return the current state of a WiMAX device
+ *
+ * @wimax_dev: WiMAX device descriptor
+ *
+ * Returns: Current state of the device according to its driver.
+ */
+enum wimax_st wimax_state_get(struct wimax_dev *wimax_dev)
+{
+	enum wimax_st state;
+	mutex_lock(&wimax_dev->mutex);
+	state = wimax_dev->state;
+	mutex_unlock(&wimax_dev->mutex);
+	return state;
+}
+EXPORT_SYMBOL_GPL(wimax_state_get);
+
+
+/**
+ * wimax_dev_init - initialize a newly allocated instance
+ *
+ * @wimax_dev: WiMAX device descriptor to initialize.
+ *
+ * Initializes fields of a freshly allocated @wimax_dev instance. This
+ * function assumes that after allocation, the memory occupied by
+ * @wimax_dev was zeroed.
+ */
+void wimax_dev_init(struct wimax_dev *wimax_dev)
+{
+	INIT_LIST_HEAD(&wimax_dev->id_table_node);
+	__wimax_state_set(wimax_dev, WIMAX_ST_UNINITIALIZED);
+	mutex_init(&wimax_dev->mutex);
+	mutex_init(&wimax_dev->mutex_reset);
+}
+EXPORT_SYMBOL_GPL(wimax_dev_init);
+
+/*
+ * This extern is declared here because it's easier to keep track --
+ * both declarations are a list of the same
+ */
+extern struct genl_ops
+	wimax_gnl_msg_from_user,
+	wimax_gnl_reset,
+	wimax_gnl_rfkill;
+
+static
+struct genl_ops *wimax_gnl_ops[] = {
+	&wimax_gnl_msg_from_user,
+	&wimax_gnl_reset,
+	&wimax_gnl_rfkill,
+};
+
+
+static
+size_t wimax_addr_scnprint(char *addr_str, size_t addr_str_size,
+			   unsigned char *addr, size_t addr_len)
+{
+	unsigned cnt, total;
+	for (total = cnt = 0; cnt < addr_len; cnt++)
+		total += scnprintf(addr_str + total, addr_str_size - total,
+				   "%02x%c", addr[cnt],
+				   cnt == addr_len - 1 ? '\0' : ':');
+	return total;
+}
+
+
+/**
+ * wimax_dev_add - Register a new WiMAX device
+ *
+ * @wimax_dev: WiMAX device descriptor (as embedded in your @net_dev's
+ *     priv data). You must have called wimax_dev_init() on it before.
+ *
+ * @net_dev: net device the @wimax_dev is associated with. The
+ *     function expects SET_NETDEV_DEV() and register_netdev() were
+ *     already called on it.
+ *
+ * Registers the new WiMAX device, sets up the user-kernel control
+ * interface (generic netlink) and common WiMAX infrastructure.
+ *
+ * Note that the parts that will allow interaction with user space are
+ * setup at the very end, when the rest is in place, as once that
+ * happens, the driver might get user space control requests via
+ * netlink or from debugfs that might translate into calls into
+ * wimax_dev->op_*().
+ */
+int wimax_dev_add(struct wimax_dev *wimax_dev, struct net_device *net_dev)
+{
+	int result;
+	struct device *dev = net_dev->dev.parent;
+	char addr_str[32];
+
+	d_fnstart(3, dev, "(wimax_dev %p net_dev %p)\n", wimax_dev, net_dev);
+
+	/* Do the RFKILL setup before locking, as RFKILL will call
+	 * into our functions. */
+	wimax_dev->net_dev = net_dev;
+	result = wimax_rfkill_add(wimax_dev);
+	if (result < 0)
+		goto error_rfkill_add;
+
+	/* Set up user-space interaction */
+	mutex_lock(&wimax_dev->mutex);
+	wimax_id_table_add(wimax_dev);
+	result = wimax_debugfs_add(wimax_dev);
+	if (result < 0) {
+		dev_err(dev, "cannot initialize debugfs: %d\n",
+			result);
+		goto error_debugfs_add;
+	}
+
+	__wimax_state_set(wimax_dev, WIMAX_ST_DOWN);
+	mutex_unlock(&wimax_dev->mutex);
+
+	wimax_addr_scnprint(addr_str, sizeof(addr_str),
+			    net_dev->dev_addr, net_dev->addr_len);
+	dev_err(dev, "WiMAX interface %s (%s) ready\n",
+		net_dev->name, addr_str);
+	d_fnend(3, dev, "(wimax_dev %p net_dev %p) = 0\n", wimax_dev, net_dev);
+	return 0;
+
+error_debugfs_add:
+	wimax_id_table_rm(wimax_dev);
+	mutex_unlock(&wimax_dev->mutex);
+	wimax_rfkill_rm(wimax_dev);
+error_rfkill_add:
+	d_fnend(3, dev, "(wimax_dev %p net_dev %p) = %d\n",
+		wimax_dev, net_dev, result);
+	return result;
+}
+EXPORT_SYMBOL_GPL(wimax_dev_add);
+
+
+/**
+ * wimax_dev_rm - Unregister an existing WiMAX device
+ *
+ * @wimax_dev: WiMAX device descriptor
+ *
+ * Unregisters a WiMAX device previously registered for use with
+ * wimax_add_rm().
+ *
+ * IMPORTANT! Must call before calling unregister_netdev().
+ *
+ * After this function returns, you will not get any more user space
+ * control requests (via netlink or debugfs) and thus to wimax_dev->ops.
+ *
+ * Reentrancy control is ensured by setting the state to
+ * %__WIMAX_ST_QUIESCING. rfkill operations coming through
+ * wimax_*rfkill*() will be stopped by the quiescing state; ops coming
+ * from the rfkill subsystem will be stopped by the support being
+ * removed by wimax_rfkill_rm().
+ */
+void wimax_dev_rm(struct wimax_dev *wimax_dev)
+{
+	d_fnstart(3, NULL, "(wimax_dev %p)\n", wimax_dev);
+
+	mutex_lock(&wimax_dev->mutex);
+	__wimax_state_change(wimax_dev, __WIMAX_ST_QUIESCING);
+	wimax_debugfs_rm(wimax_dev);
+	wimax_id_table_rm(wimax_dev);
+	__wimax_state_change(wimax_dev, WIMAX_ST_DOWN);
+	mutex_unlock(&wimax_dev->mutex);
+	wimax_rfkill_rm(wimax_dev);
+	d_fnend(3, NULL, "(wimax_dev %p) = void\n", wimax_dev);
+}
+EXPORT_SYMBOL_GPL(wimax_dev_rm);
+
+struct genl_family wimax_gnl_family = {
+	.id = GENL_ID_GENERATE,
+	.name = "WiMAX",
+	.version = WIMAX_GNL_VERSION,
+	.hdrsize = 0,
+	.maxattr = WIMAX_GNL_ATTR_MAX,
+};
+
+struct genl_multicast_group wimax_gnl_mcg = {
+	.name = "msg",
+};
+
+
+
+/* Shutdown the wimax stack */
+static
+int __init wimax_subsys_init(void)
+{
+	int result, cnt;
+
+	d_fnstart(4, NULL, "()\n");
+	snprintf(wimax_gnl_family.name, sizeof(wimax_gnl_family.name),
+		 "WiMAX");
+	result = genl_register_family(&wimax_gnl_family);
+	if (unlikely(result < 0)) {
+		printk(KERN_ERR "cannot register generic netlink family: %d\n",
+		       result);
+		goto error_register_family;
+	}
+
+	for (cnt = 0; cnt < ARRAY_SIZE(wimax_gnl_ops); cnt++) {
+		result = genl_register_ops(&wimax_gnl_family,
+					   wimax_gnl_ops[cnt]);
+		d_printf(4, NULL, "registering generic netlink op code "
+			 "%u: %d\n", wimax_gnl_ops[cnt]->cmd, result);
+		if (unlikely(result < 0)) {
+			printk(KERN_ERR "cannot register generic netlink op "
+			       "code %u: %d\n",
+			       wimax_gnl_ops[cnt]->cmd, result);
+			goto error_register_ops;
+		}
+	}
+
+	result = genl_register_mc_group(&wimax_gnl_family, &wimax_gnl_mcg);
+	if (result < 0)
+		goto error_mc_group;
+	d_fnend(4, NULL, "() = 0\n");
+	return 0;
+
+error_mc_group:
+error_register_ops:
+	for (cnt--; cnt >= 0; cnt--)
+		genl_unregister_ops(&wimax_gnl_family,
+				    wimax_gnl_ops[cnt]);
+	genl_unregister_family(&wimax_gnl_family);
+error_register_family:
+	d_fnend(4, NULL, "() = %d\n", result);
+	return result;
+
+}
+module_init(wimax_subsys_init);
+
+
+/* Shutdown the wimax stack */
+static
+void __exit wimax_subsys_exit(void)
+{
+	int cnt;
+	wimax_id_table_release();
+	genl_unregister_mc_group(&wimax_gnl_family, &wimax_gnl_mcg);
+	for (cnt = ARRAY_SIZE(wimax_gnl_ops) - 1; cnt >= 0; cnt--)
+		genl_unregister_ops(&wimax_gnl_family,
+				    wimax_gnl_ops[cnt]);
+	genl_unregister_family(&wimax_gnl_family);
+}
+module_exit(wimax_subsys_exit);
+
+MODULE_AUTHOR("Intel Corporation <linux-wimax@intel.com>");
+MODULE_DESCRIPTION("Linux WiMAX stack");
+MODULE_LICENSE("GPL");
+
diff --git a/net/wimax/wimax-internal.h b/net/wimax/wimax-internal.h
new file mode 100644
index 00000000000..1e743d21485
--- /dev/null
+++ b/net/wimax/wimax-internal.h
@@ -0,0 +1,91 @@
+/*
+ * Linux WiMAX
+ * Internal API for kernel space WiMAX stack
+ *
+ *
+ * Copyright (C) 2007 Intel Corporation <linux-wimax@intel.com>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This header file is for declarations and definitions internal to
+ * the WiMAX stack. For public APIs and documentation, see
+ * include/net/wimax.h and include/linux/wimax.h.
+ */
+
+#ifndef __WIMAX_INTERNAL_H__
+#define __WIMAX_INTERNAL_H__
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <net/wimax.h>
+
+
+/*
+ * Decide if a (locked) device is ready for use
+ *
+ * Before using the device structure, it must be locked
+ * (wimax_dev->mutex). As well, most operations need to call this
+ * function to check if the state is the right one.
+ *
+ * An error value will be returned if the state is not the right
+ * one. In that case, the caller should not attempt to use the device
+ * and just unlock it.
+ */
+static inline __must_check
+int wimax_dev_is_ready(struct wimax_dev *wimax_dev)
+{
+	if (wimax_dev->state == __WIMAX_ST_NULL)
+		return -EINVAL;	/* Device is not even registered! */
+	if (wimax_dev->state == WIMAX_ST_DOWN)
+		return -ENOMEDIUM;
+	if (wimax_dev->state == __WIMAX_ST_QUIESCING)
+		return -ESHUTDOWN;
+	return 0;
+}
+
+
+static inline
+void __wimax_state_set(struct wimax_dev *wimax_dev, enum wimax_st state)
+{
+	wimax_dev->state = state;
+}
+extern void __wimax_state_change(struct wimax_dev *, enum wimax_st);
+
+#ifdef CONFIG_DEBUG_FS
+extern int wimax_debugfs_add(struct wimax_dev *);
+extern void wimax_debugfs_rm(struct wimax_dev *);
+#else
+static inline int wimax_debugfs_add(struct wimax_dev *wimax_dev)
+{
+	return 0;
+}
+static inline void wimax_debugfs_rm(struct wimax_dev *wimax_dev) {}
+#endif
+
+extern void wimax_id_table_add(struct wimax_dev *);
+extern struct wimax_dev *wimax_dev_get_by_genl_info(struct genl_info *, int);
+extern void wimax_id_table_rm(struct wimax_dev *);
+extern void wimax_id_table_release(void);
+
+extern int wimax_rfkill_add(struct wimax_dev *);
+extern void wimax_rfkill_rm(struct wimax_dev *);
+
+extern struct genl_family wimax_gnl_family;
+extern struct genl_multicast_group wimax_gnl_mcg;
+
+#endif /* #ifdef __KERNEL__ */
+#endif /* #ifndef __WIMAX_INTERNAL_H__ */