diff options
-rw-r--r-- | Documentation/hwmon/w83781d | 18 | ||||
-rw-r--r-- | drivers/hwmon/Kconfig | 6 | ||||
-rw-r--r-- | drivers/hwmon/w83781d.c | 29 |
3 files changed, 14 insertions, 39 deletions
diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d index dbeadb269a6..6f800a0283e 100644 --- a/Documentation/hwmon/w83781d +++ b/Documentation/hwmon/w83781d @@ -14,10 +14,6 @@ Supported chips: Prefix: 'w83783s' Addresses scanned: I2C 0x2d Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83783s.pdf - * Winbond W83627HF - Prefix: 'w83627hf' - Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports) - Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf * Asus AS99127F Prefix: 'as99127f' Addresses scanned: I2C 0x28 - 0x2f @@ -50,20 +46,18 @@ force_subclients=bus,caddr,saddr,saddr Description ----------- -This driver implements support for the Winbond W83781D, W83782D, W83783S, -W83627HF chips, and the Asus AS99127F chips. We will refer to them -collectively as W8378* chips. +This driver implements support for the Winbond W83781D, W83782D, W83783S +chips, and the Asus AS99127F chips. We will refer to them collectively as +W8378* chips. There is quite some difference between these chips, but they are similar enough that it was sensible to put them together in one driver. -The W83627HF chip is assumed to be identical to the ISA W83782D. The Asus chips are similar to an I2C-only W83782D. Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA as99127f 7 3 0 3 0x31 0x12c3 yes no as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes -w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC) w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no @@ -143,9 +137,9 @@ Individual alarm and beep bits: 0x000400: in6 0x000800: fan3 0x001000: chassis -0x002000: temp3 (W83782D and W83627HF only) -0x010000: in7 (W83782D and W83627HF only) -0x020000: in8 (W83782D and W83627HF only) +0x002000: temp3 (W83782D only) +0x010000: in7 (W83782D only) +0x020000: in8 (W83782D only) If an alarm triggers, it will remain triggered until the hardware register is read at least once. This means that the cause for the alarm may diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index af43d566d77..27e0b34ead5 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -631,13 +631,13 @@ config SENSORS_VT8231 will be called vt8231. config SENSORS_W83781D - tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" + tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" depends on I2C select HWMON_VID help If you say yes here you get support for the Winbond W8378x series - of sensor chips: the W83781D, W83782D, W83783S and W83627HF, - and the similar Asus AS99127F. + of sensor chips: the W83781D, W83782D and W83783S, and the similar + Asus AS99127F. This driver can also be built as a module. If so, the module will be called w83781d. diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index d38b9ede3ab..8d4d1acbf65 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -28,7 +28,6 @@ as99127f 7 3 0 3 0x31 0x12c3 yes no as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes - w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC) w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no @@ -59,7 +58,7 @@ static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, static unsigned short isa_address = 0x290; /* Insmod parameters */ -I2C_CLIENT_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f); +I2C_CLIENT_INSMOD_4(w83781d, w83782d, w83783s, as99127f); I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); @@ -113,7 +112,7 @@ MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); #define W83781D_REG_ALARM1 0x41 #define W83781D_REG_ALARM2 0x42 -/* Real-time status (W83782D, W83783S, W83627HF) */ +/* Real-time status (W83782D, W83783S) */ #define W83782D_REG_ALARM1 0x459 #define W83782D_REG_ALARM2 0x45A #define W83782D_REG_ALARM3 0x45B @@ -962,8 +961,6 @@ w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, client_name = "w83782d subclient"; else if (kind == w83783s) client_name = "w83783s subclient"; - else if (kind == w83627hf) - client_name = "w83627hf subclient"; else if (kind == as99127f) client_name = "as99127f subclient"; @@ -1267,8 +1264,6 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) kind = w83782d; else if (val1 == 0x40 && vendid == winbond && address == 0x2d) kind = w83783s; - else if (val1 == 0x21 && vendid == winbond) - kind = w83627hf; else if (val1 == 0x31) kind = as99127f; else { @@ -1287,8 +1282,6 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) client_name = "w83782d"; } else if (kind == w83783s) { client_name = "w83783s"; - } else if (kind == w83627hf) { - client_name = "w83627hf"; } else if (kind == as99127f) { client_name = "as99127f"; } @@ -1395,10 +1388,6 @@ w83781d_isa_probe(struct platform_device *pdev) reg = w83781d_read_value(data, W83781D_REG_WCHIPID); switch (reg) { - case 0x21: - data->type = w83627hf; - name = "w83627hf"; - break; case 0x30: data->type = w83782d; name = "w83782d"; @@ -1598,11 +1587,6 @@ w83781d_init_device(struct device *dev) int type = data->type; u8 tmp; - if (type == w83627hf) - dev_info(dev, "The W83627HF chip is better supported by the " - "w83627hf driver, support will be dropped from the " - "w83781d driver soon\n"); - if (reset && type != as99127f) { /* this resets registers we don't have documentation for on the as99127f */ /* Resetting the chip has been the default for a long time, @@ -1716,8 +1700,7 @@ static struct w83781d_data *w83781d_update_device(struct device *dev) w83781d_read_value(data, W83781D_REG_IN_MIN(i)); data->in_max[i] = w83781d_read_value(data, W83781D_REG_IN_MAX(i)); - if ((data->type != w83782d) - && (data->type != w83627hf) && (i == 6)) + if ((data->type != w83782d) && (i == 6)) break; } for (i = 0; i < 3; i++) { @@ -1775,7 +1758,7 @@ static struct w83781d_data *w83781d_update_device(struct device *dev) data->fan_div[1] |= (i >> 4) & 0x04; data->fan_div[2] |= (i >> 5) & 0x04; } - if ((data->type == w83782d) || (data->type == w83627hf)) { + if (data->type == w83782d) { data->alarms = w83781d_read_value(data, W83782D_REG_ALARM1) | (w83781d_read_value(data, @@ -1885,13 +1868,11 @@ w83781d_isa_found(unsigned short address) outb_p(W83781D_REG_WCHIPID, address + W83781D_ADDR_REG_OFFSET); val = inb_p(address + W83781D_DATA_REG_OFFSET); if ((val & 0xfe) == 0x10 /* W83781D */ - || val == 0x30 /* W83782D */ - || val == 0x21) /* W83627HF */ + || val == 0x30) /* W83782D */ found = 1; if (found) pr_info("w83781d: Found a %s chip at %#x\n", - val == 0x21 ? "W83627HF" : val == 0x30 ? "W83782D" : "W83781D", (int)address); release: |