aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/Kconfig1
-rw-r--r--drivers/ata/Kconfig4
-rw-r--r--drivers/ata/ahci.c60
-rw-r--r--drivers/ata/ata_generic.c6
-rw-r--r--drivers/ata/libata-core.c14
-rw-r--r--drivers/ata/libata-sff.c21
-rw-r--r--drivers/ata/pata_cmd64x.c23
-rw-r--r--drivers/ata/pata_hpt3x2n.c6
-rw-r--r--drivers/ata/pata_it821x.c4
-rw-r--r--drivers/ata/pata_ixp4xx_cf.c5
-rw-r--r--drivers/ata/pata_legacy.c4
-rw-r--r--drivers/ata/pata_rz1000.c6
-rw-r--r--drivers/ata/sata_uli.c3
-rw-r--r--drivers/ata/sata_via.c12
-rw-r--r--include/asm-generic/libata-portmap.h4
-rw-r--r--include/asm-powerpc/libata-portmap.h12
-rw-r--r--include/linux/libata.h5
17 files changed, 137 insertions, 53 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 0855d55c194..b268c417c0b 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -484,6 +484,7 @@ config PPC_MAPLE
select PPC_970_NAP
select PPC_NATIVE
select PPC_RTAS
+ select ATA_NONSTANDARD if ATA
default n
help
This option enables support for the Maple 970FX Evaluation Board.
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index da21552d2b1..1c94b43d2c9 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -19,6 +19,10 @@ config ATA
if ATA
+config ATA_NONSTANDARD
+ bool
+ default n
+
config SATA_AHCI
tristate "AHCI SATA support"
depends on PCI
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index e3c7b312287..28a82e3403f 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -75,6 +75,7 @@ enum {
AHCI_CMD_CLR_BUSY = (1 << 10),
RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
+ RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
board_ahci = 0,
@@ -202,6 +203,10 @@ struct ahci_port_priv {
dma_addr_t cmd_tbl_dma;
void *rx_fis;
dma_addr_t rx_fis_dma;
+ /* for NCQ spurious interrupt analysis */
+ int ncq_saw_spurious_sdb_cnt;
+ unsigned int ncq_saw_d2h:1;
+ unsigned int ncq_saw_dmas:1;
};
static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg);
@@ -898,7 +903,7 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class)
/* clear D2H reception area to properly wait for D2H FIS */
ata_tf_init(ap->device, &tf);
- tf.command = 0xff;
+ tf.command = 0x80;
ata_tf_to_fis(&tf, d2h_fis, 0);
rc = sata_std_hardreset(ap, class);
@@ -1109,8 +1114,9 @@ static void ahci_host_intr(struct ata_port *ap)
void __iomem *mmio = ap->host->mmio_base;
void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
struct ata_eh_info *ehi = &ap->eh_info;
+ struct ahci_port_priv *pp = ap->private_data;
u32 status, qc_active;
- int rc;
+ int rc, known_irq = 0;
status = readl(port_mmio + PORT_IRQ_STAT);
writel(status, port_mmio + PORT_IRQ_STAT);
@@ -1137,17 +1143,53 @@ static void ahci_host_intr(struct ata_port *ap)
/* hmmm... a spurious interupt */
- /* some devices send D2H reg with I bit set during NCQ command phase */
- if (ap->sactive && (status & PORT_IRQ_D2H_REG_FIS))
+ /* if !NCQ, ignore. No modern ATA device has broken HSM
+ * implementation for non-NCQ commands.
+ */
+ if (!ap->sactive)
return;
- /* ignore interim PIO setup fis interrupts */
- if (ata_tag_valid(ap->active_tag) && (status & PORT_IRQ_PIOS_FIS))
- return;
+ if (status & PORT_IRQ_D2H_REG_FIS) {
+ if (!pp->ncq_saw_d2h)
+ ata_port_printk(ap, KERN_INFO,
+ "D2H reg with I during NCQ, "
+ "this message won't be printed again\n");
+ pp->ncq_saw_d2h = 1;
+ known_irq = 1;
+ }
+
+ if (status & PORT_IRQ_DMAS_FIS) {
+ if (!pp->ncq_saw_dmas)
+ ata_port_printk(ap, KERN_INFO,
+ "DMAS FIS during NCQ, "
+ "this message won't be printed again\n");
+ pp->ncq_saw_dmas = 1;
+ known_irq = 1;
+ }
+
+ if (status & PORT_IRQ_SDB_FIS &&
+ pp->ncq_saw_spurious_sdb_cnt < 10) {
+ /* SDB FIS containing spurious completions might be
+ * dangerous, we need to know more about them. Print
+ * more of it.
+ */
+ const u32 *f = pp->rx_fis + RX_FIS_SDB;
+
+ ata_port_printk(ap, KERN_INFO, "Spurious SDB FIS during NCQ "
+ "issue=0x%x SAct=0x%x FIS=%08x:%08x%s\n",
+ readl(port_mmio + PORT_CMD_ISSUE),
+ readl(port_mmio + PORT_SCR_ACT),
+ le32_to_cpu(f[0]), le32_to_cpu(f[1]),
+ pp->ncq_saw_spurious_sdb_cnt < 10 ?
+ "" : ", shutting up");
+
+ pp->ncq_saw_spurious_sdb_cnt++;
+ known_irq = 1;
+ }
- if (ata_ratelimit())
+ if (!known_irq)
ata_port_printk(ap, KERN_INFO, "spurious interrupt "
- "(irq_stat 0x%x active_tag %d sactive 0x%x)\n",
+ "(irq_stat 0x%x active_tag 0x%x sactive 0x%x)\n",
status, ap->active_tag, ap->sactive);
}
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 908751d27e7..24af56081b5 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -64,6 +64,7 @@ static void generic_error_handler(struct ata_port *ap)
/**
* generic_set_mode - mode setting
* @ap: interface to set up
+ * @unused: returned device on error
*
* Use a non standard set_mode function. We don't want to be tuned.
* The BIOS configured everything. Our job is not to fiddle. We
@@ -71,7 +72,7 @@ static void generic_error_handler(struct ata_port *ap)
* and respect them.
*/
-static void generic_set_mode(struct ata_port *ap)
+static int generic_set_mode(struct ata_port *ap, struct ata_device **unused)
{
int dma_enabled = 0;
int i;
@@ -82,7 +83,7 @@ static void generic_set_mode(struct ata_port *ap)
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- if (ata_dev_enabled(dev)) {
+ if (ata_dev_ready(dev)) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
dev->dma_mode = XFER_MW_DMA_0;
@@ -99,6 +100,7 @@ static void generic_set_mode(struct ata_port *ap)
}
}
}
+ return 0;
}
static struct scsi_host_template generic_sht = {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 0d51d13b16b..a388a8df004 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2431,18 +2431,8 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
int i, rc = 0, used_dma = 0, found = 0;
/* has private set_mode? */
- if (ap->ops->set_mode) {
- /* FIXME: make ->set_mode handle no device case and
- * return error code and failing device on failure.
- */
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- if (ata_dev_ready(&ap->device[i])) {
- ap->ops->set_mode(ap);
- break;
- }
- }
- return 0;
- }
+ if (ap->ops->set_mode)
+ return ap->ops->set_mode(ap, r_failed_dev);
/* step 1: calculate xfer_mask */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 623cec914c9..12c88c58803 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -827,7 +827,8 @@ void ata_bmdma_error_handler(struct ata_port *ap)
*/
void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
{
- ata_bmdma_stop(qc);
+ if (qc->ap->ioaddr.bmdma_addr)
+ ata_bmdma_stop(qc);
}
#ifdef CONFIG_PCI
@@ -870,7 +871,8 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
bmdma = pci_resource_start(pdev, 4);
if (bmdma) {
- if (inb(bmdma + 2) & 0x80)
+ if ((!(port[p]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (inb(bmdma + 2) & 0x80))
probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
probe_ent->port[p].bmdma_addr = bmdma;
}
@@ -886,7 +888,8 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
bmdma = pci_resource_start(pdev, 4);
if (bmdma) {
bmdma += 8;
- if(inb(bmdma + 2) & 0x80)
+ if ((!(port[p]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (inb(bmdma + 2) & 0x80))
probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
probe_ent->port[p].bmdma_addr = bmdma;
}
@@ -914,13 +917,14 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
probe_ent->irq_flags = IRQF_SHARED;
if (port_mask & ATA_PORT_PRIMARY) {
- probe_ent->irq = ATA_PRIMARY_IRQ;
+ probe_ent->irq = ATA_PRIMARY_IRQ(pdev);
probe_ent->port[0].cmd_addr = ATA_PRIMARY_CMD;
probe_ent->port[0].altstatus_addr =
probe_ent->port[0].ctl_addr = ATA_PRIMARY_CTL;
if (bmdma) {
probe_ent->port[0].bmdma_addr = bmdma;
- if (inb(bmdma + 2) & 0x80)
+ if ((!(port[0]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (inb(bmdma + 2) & 0x80))
probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
}
ata_std_ports(&probe_ent->port[0]);
@@ -929,15 +933,16 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
if (port_mask & ATA_PORT_SECONDARY) {
if (probe_ent->irq)
- probe_ent->irq2 = ATA_SECONDARY_IRQ;
+ probe_ent->irq2 = ATA_SECONDARY_IRQ(pdev);
else
- probe_ent->irq = ATA_SECONDARY_IRQ;
+ probe_ent->irq = ATA_SECONDARY_IRQ(pdev);
probe_ent->port[1].cmd_addr = ATA_SECONDARY_CMD;
probe_ent->port[1].altstatus_addr =
probe_ent->port[1].ctl_addr = ATA_SECONDARY_CTL;
if (bmdma) {
probe_ent->port[1].bmdma_addr = bmdma + 8;
- if (inb(bmdma + 10) & 0x80)
+ if ((!(port[1]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (inb(bmdma + 10) & 0x80))
probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
}
ata_std_ports(&probe_ent->port[1]);
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 15841a56369..449162cbf93 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -197,7 +197,7 @@ static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev)
static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
static const u8 udma_data[] = {
- 0x31, 0x21, 0x11, 0x25, 0x15, 0x05
+ 0x30, 0x20, 0x10, 0x20, 0x10, 0x00
};
static const u8 mwdma_data[] = {
0x30, 0x20, 0x10
@@ -213,12 +213,21 @@ static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
pci_read_config_byte(pdev, pciD, &regD);
pci_read_config_byte(pdev, pciU, &regU);
- regD &= ~(0x20 << shift);
- regU &= ~(0x35 << shift);
+ /* DMA bits off */
+ regD &= ~(0x20 << adev->devno);
+ /* DMA control bits */
+ regU &= ~(0x30 << shift);
+ /* DMA timing bits */
+ regU &= ~(0x05 << adev->devno);
- if (adev->dma_mode >= XFER_UDMA_0)
+ if (adev->dma_mode >= XFER_UDMA_0) {
+ /* Merge thge timing value */
regU |= udma_data[adev->dma_mode - XFER_UDMA_0] << shift;
- else
+ /* Merge the control bits */
+ regU |= 1 << adev->devno; /* UDMA on */
+ if (adev->dma_mode > 2) /* 15nS timing */
+ regU |= 4 << adev->devno;
+ } else
regD |= mwdma_data[adev->dma_mode - XFER_MW_DMA_0] << shift;
regD |= 0x20 << adev->devno;
@@ -239,8 +248,8 @@ static void cmd648_bmdma_stop(struct ata_queued_cmd *qc)
struct ata_port *ap = qc->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u8 dma_intr;
- int dma_reg = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
- int dma_mask = ap->port_no ? ARTTIM2 : CFR;
+ int dma_mask = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
+ int dma_reg = ap->port_no ? ARTTIM2 : CFR;
ata_bmdma_stop(qc);
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index f6817b4093a..886fab9aa62 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x2n"
-#define DRV_VERSION "0.3"
+#define DRV_VERSION "0.3.2"
enum {
HPT_PCI_FAST = (1 << 31),
@@ -297,11 +297,11 @@ static int hpt3x2n_pair_idle(struct ata_port *ap)
return 0;
}
-static int hpt3x2n_use_dpll(struct ata_port *ap, int reading)
+static int hpt3x2n_use_dpll(struct ata_port *ap, int writing)
{
long flags = (long)ap->host->private_data;
/* See if we should use the DPLL */
- if (reading == 0)
+ if (writing)
return USE_DPLL; /* Needed for write */
if (flags & PCI66)
return USE_DPLL; /* Needed at 66Mhz */
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 0b56ff3d1cf..e8afd486434 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -476,6 +476,7 @@ static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc)
/**
* it821x_smart_set_mode - mode setting
* @ap: interface to set up
+ * @unused: device that failed (error only)
*
* Use a non standard set_mode function. We don't want to be tuned.
* The BIOS configured everything. Our job is not to fiddle. We
@@ -483,7 +484,7 @@ static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc)
* and respect them.
*/
-static void it821x_smart_set_mode(struct ata_port *ap)
+static int it821x_smart_set_mode(struct ata_port *ap, struct ata_device **unused)
{
int dma_enabled = 0;
int i;
@@ -512,6 +513,7 @@ static void it821x_smart_set_mode(struct ata_port *ap)
}
}
}
+ return 0;
}
/**
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index cb8924109f5..23b8aab3ebd 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -23,9 +23,9 @@
#include <scsi/scsi_host.h>
#define DRV_NAME "pata_ixp4xx_cf"
-#define DRV_VERSION "0.1.1"
+#define DRV_VERSION "0.1.1ac1"
-static void ixp4xx_set_mode(struct ata_port *ap)
+static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device *adev)
{
int i;
@@ -38,6 +38,7 @@ static void ixp4xx_set_mode(struct ata_port *ap)
dev->flags |= ATA_DFLAG_PIO;
}
}
+ return 0;
}
static void ixp4xx_phy_reset(struct ata_port *ap)
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index e7bf9d89c8e..581cb33c6f4 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -96,6 +96,7 @@ static int pio_mask = 0x1F; /* PIO range for autospeed devices */
/**
* legacy_set_mode - mode setting
* @ap: IDE interface
+ * @unused: Device that failed when error is returned
*
* Use a non standard set_mode function. We don't want to be tuned.
*
@@ -105,7 +106,7 @@ static int pio_mask = 0x1F; /* PIO range for autospeed devices */
* expand on this as per hdparm in the base kernel.
*/
-static void legacy_set_mode(struct ata_port *ap)
+static int legacy_set_mode(struct ata_port *ap, struct ata_device **unused)
{
int i;
@@ -118,6 +119,7 @@ static void legacy_set_mode(struct ata_port *ap)
dev->flags |= ATA_DFLAG_PIO;
}
}
+ return 0;
}
static struct scsi_host_template legacy_sht = {
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index adf4cc134f2..cec0729225e 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -52,19 +52,20 @@ static void rz1000_error_handler(struct ata_port *ap)
/**
* rz1000_set_mode - mode setting function
* @ap: ATA interface
+ * @unused: returned device on set_mode failure
*
* Use a non standard set_mode function. We don't want to be tuned. We
* would prefer to be BIOS generic but for the fact our hardware is
* whacked out.
*/
-static void rz1000_set_mode(struct ata_port *ap)
+static int rz1000_set_mode(struct ata_port *ap, struct ata_device **unused)
{
int i;
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- if (ata_dev_enabled(dev)) {
+ if (ata_dev_ready(dev)) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
@@ -72,6 +73,7 @@ static void rz1000_set_mode(struct ata_port *ap)
dev->flags |= ATA_DFLAG_PIO;
}
}
+ return 0;
}
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 5c603ca3a50..a43aec62d50 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -128,7 +128,8 @@ static const struct ata_port_operations uli_ops = {
static struct ata_port_info uli_port_info = {
.sht = &uli_sht,
- .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_IGN_SIMPLEX,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &uli_ops,
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 88f0565c888..d3d5c0d5703 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -74,6 +74,7 @@ enum {
static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+static void svia_noop_freeze(struct ata_port *ap);
static void vt6420_error_handler(struct ata_port *ap);
static const struct pci_device_id svia_pci_tbl[] = {
@@ -128,7 +129,7 @@ static const struct ata_port_operations vt6420_sata_ops = {
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_pio_data_xfer,
- .freeze = ata_bmdma_freeze,
+ .freeze = svia_noop_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = vt6420_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
@@ -204,6 +205,15 @@ static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
outl(val, ap->ioaddr.scr_addr + (4 * sc_reg));
}
+static void svia_noop_freeze(struct ata_port *ap)
+{
+ /* Some VIA controllers choke if ATA_NIEN is manipulated in
+ * certain way. Leave it alone and just clear pending IRQ.
+ */
+ ata_chk_status(ap);
+ ata_bmdma_irq_clear(ap);
+}
+
/**
* vt6420_prereset - prereset for vt6420
* @ap: target ATA port
diff --git a/include/asm-generic/libata-portmap.h b/include/asm-generic/libata-portmap.h
index 9202fd02d5b..62fb3618293 100644
--- a/include/asm-generic/libata-portmap.h
+++ b/include/asm-generic/libata-portmap.h
@@ -3,10 +3,10 @@
#define ATA_PRIMARY_CMD 0x1F0
#define ATA_PRIMARY_CTL 0x3F6
-#define ATA_PRIMARY_IRQ 14
+#define ATA_PRIMARY_IRQ(dev) 14
#define ATA_SECONDARY_CMD 0x170
#define ATA_SECONDARY_CTL 0x376
-#define ATA_SECONDARY_IRQ 15
+#define ATA_SECONDARY_IRQ(dev) 15
#endif
diff --git a/include/asm-powerpc/libata-portmap.h b/include/asm-powerpc/libata-portmap.h
new file mode 100644
index 00000000000..4d8518049f4
--- /dev/null
+++ b/include/asm-powerpc/libata-portmap.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_POWERPC_LIBATA_PORTMAP_H
+#define __ASM_POWERPC_LIBATA_PORTMAP_H
+
+#define ATA_PRIMARY_CMD 0x1F0
+#define ATA_PRIMARY_CTL 0x3F6
+#define ATA_PRIMARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 0)
+
+#define ATA_SECONDARY_CMD 0x170
+#define ATA_SECONDARY_CTL 0x376
+#define ATA_SECONDARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 1)
+
+#endif
diff --git a/include/linux/libata.h b/include/linux/libata.h
index f7f268e3874..22aa69e2090 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -177,6 +177,7 @@ enum {
* Register FIS clearing BSY */
ATA_FLAG_DEBUGMSG = (1 << 13),
ATA_FLAG_SETXFER_POLLING= (1 << 14), /* use polling for SETXFER */
+ ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */
/* The following flag belongs to ap->pflags but is kept in
* ap->flags because it's referenced in many LLDs and will be
@@ -612,11 +613,11 @@ struct ata_port_operations {
void (*dev_select)(struct ata_port *ap, unsigned int device);
void (*phy_reset) (struct ata_port *ap); /* obsolete */
- void (*set_mode) (struct ata_port *ap);
+ int (*set_mode) (struct ata_port *ap, struct ata_device **r_failed_dev);
void (*post_set_mode) (struct ata_port *ap);
- int (*check_atapi_dma) (struct ata_queued_cmd *qc);
+ int (*check_atapi_dma) (struct ata_queued_cmd *qc);
void (*bmdma_setup) (struct ata_queued_cmd *qc);
void (*bmdma_start) (struct ata_queued_cmd *qc);