aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/networking/generic-hdlc.txt51
-rw-r--r--Documentation/networking/multicast.txt1
-rw-r--r--Documentation/networking/net-modules.txt3
-rw-r--r--drivers/net/8139cp.c100
-rw-r--r--drivers/net/8139too.c194
-rw-r--r--drivers/net/Kconfig47
-rw-r--r--drivers/net/Makefile4
-rw-r--r--drivers/net/Space.c6
-rw-r--r--drivers/net/arm/etherh.c16
-rw-r--r--drivers/net/au1000_eth.c10
-rw-r--r--drivers/net/bmac.c2
-rw-r--r--drivers/net/dm9000.c1219
-rw-r--r--drivers/net/dm9000.h135
-rw-r--r--drivers/net/fmv18x.c689
-rw-r--r--drivers/net/pcmcia/pcnet_cs.c17
-rw-r--r--drivers/net/ppp_generic.c177
-rw-r--r--drivers/net/r8169.c320
-rw-r--r--drivers/net/sk98lin/skge.c8
-rw-r--r--drivers/net/sk_g16.c2066
-rw-r--r--drivers/net/sk_g16.h165
-rw-r--r--drivers/net/skge.c3386
-rw-r--r--drivers/net/skge.h3005
-rw-r--r--drivers/net/smc91x.c58
-rw-r--r--drivers/net/smc91x.h15
-rw-r--r--drivers/net/starfire.c142
-rw-r--r--drivers/net/starfire_firmware.h346
-rw-r--r--drivers/net/tlan.c4
-rw-r--r--drivers/net/tokenring/ibmtr.c11
-rw-r--r--drivers/net/wan/hdlc_fr.c320
-rw-r--r--drivers/net/wan/hdlc_generic.c16
-rw-r--r--drivers/net/wan/lmc/lmc_main.c8
-rw-r--r--drivers/net/wireless/orinoco.c332
-rw-r--r--drivers/net/wireless/orinoco.h1
-rw-r--r--include/linux/dm9000.h36
-rw-r--r--include/linux/hdlc.h4
-rw-r--r--include/linux/if.h2
-rw-r--r--include/linux/wireless.h283
-rw-r--r--net/core/wireless.c74
38 files changed, 9416 insertions, 3857 deletions
diff --git a/Documentation/networking/generic-hdlc.txt b/Documentation/networking/generic-hdlc.txt
index 7d1dc6b884f..31bc8b759b7 100644
--- a/Documentation/networking/generic-hdlc.txt
+++ b/Documentation/networking/generic-hdlc.txt
@@ -1,21 +1,21 @@
Generic HDLC layer
Krzysztof Halasa <khc@pm.waw.pl>
-January, 2003
Generic HDLC layer currently supports:
-- Frame Relay (ANSI, CCITT and no LMI), with ARP support (no InARP).
- Normal (routed) and Ethernet-bridged (Ethernet device emulation)
- interfaces can share a single PVC.
-- raw HDLC - either IP (IPv4) interface or Ethernet device emulation.
-- Cisco HDLC,
-- PPP (uses syncppp.c),
-- X.25 (uses X.25 routines).
-
-There are hardware drivers for the following cards:
-- C101 by Moxa Technologies Co., Ltd.
-- RISCom/N2 by SDL Communications Inc.
-- and others, some not in the official kernel.
+1. Frame Relay (ANSI, CCITT, Cisco and no LMI).
+ - Normal (routed) and Ethernet-bridged (Ethernet device emulation)
+ interfaces can share a single PVC.
+ - ARP support (no InARP support in the kernel - there is an
+ experimental InARP user-space daemon available on:
+ http://www.kernel.org/pub/linux/utils/net/hdlc/).
+2. raw HDLC - either IP (IPv4) interface or Ethernet device emulation.
+3. Cisco HDLC.
+4. PPP (uses syncppp.c).
+5. X.25 (uses X.25 routines).
+
+Generic HDLC is a protocol driver only - it needs a low-level driver
+for your particular hardware.
Ethernet device emulation (using HDLC or Frame-Relay PVC) is compatible
with IEEE 802.1Q (VLANs) and 802.1D (Ethernet bridging).
@@ -24,7 +24,7 @@ with IEEE 802.1Q (VLANs) and 802.1D (Ethernet bridging).
Make sure the hdlc.o and the hardware driver are loaded. It should
create a number of "hdlc" (hdlc0 etc) network devices, one for each
WAN port. You'll need the "sethdlc" utility, get it from:
- http://hq.pm.waw.pl/hdlc/
+ http://www.kernel.org/pub/linux/utils/net/hdlc/
Compile sethdlc.c utility:
gcc -O2 -Wall -o sethdlc sethdlc.c
@@ -52,12 +52,12 @@ Setting interface:
* v35 | rs232 | x21 | t1 | e1 - sets physical interface for a given port
if the card has software-selectable interfaces
loopback - activate hardware loopback (for testing only)
-* clock ext - external clock (uses DTE RX and TX clock)
-* clock int - internal clock (provides clock signal on DCE clock output)
-* clock txint - TX internal, RX external (provides TX clock on DCE output)
-* clock txfromrx - TX clock derived from RX clock (TX clock on DCE output)
-* rate - sets clock rate in bps (not required for external clock or
- for txfromrx)
+* clock ext - both RX clock and TX clock external
+* clock int - both RX clock and TX clock internal
+* clock txint - RX clock external, TX clock internal
+* clock txfromrx - RX clock external, TX clock derived from RX clock
+* rate - sets clock rate in bps (for "int" or "txint" clock only)
+
Setting protocol:
@@ -79,7 +79,7 @@ Setting protocol:
* x25 - sets X.25 mode
* fr - Frame Relay mode
- lmi ansi / ccitt / none - LMI (link management) type
+ lmi ansi / ccitt / cisco / none - LMI (link management) type
dce - Frame Relay DCE (network) side LMI instead of default DTE (user).
It has nothing to do with clocks!
t391 - link integrity verification polling timer (in seconds) - user
@@ -119,13 +119,14 @@ or
-If you have a problem with N2 or C101 card, you can issue the "private"
-command to see port's packet descriptor rings (in kernel logs):
+If you have a problem with N2, C101 or PLX200SYN card, you can issue the
+"private" command to see port's packet descriptor rings (in kernel logs):
sethdlc hdlc0 private
-The hardware driver has to be build with CONFIG_HDLC_DEBUG_RINGS.
+The hardware driver has to be build with #define DEBUG_RINGS.
Attaching this info to bug reports would be helpful. Anyway, let me know
if you have problems using this.
-For patches and other info look at http://hq.pm.waw.pl/hdlc/
+For patches and other info look at:
+<http://www.kernel.org/pub/linux/utils/net/hdlc/>.
diff --git a/Documentation/networking/multicast.txt b/Documentation/networking/multicast.txt
index 5049a64313d..b06c8c69266 100644
--- a/Documentation/networking/multicast.txt
+++ b/Documentation/networking/multicast.txt
@@ -47,7 +47,6 @@ ni52 <------------------ Buggy ------------------>
ni65 YES YES YES Software(#)
seeq NO NO NO N/A
sgiseek <------------------ Buggy ------------------>
-sk_g16 NO NO YES N/A
smc-ultra YES YES YES Hardware
sunlance YES YES YES Hardware
tulip YES YES YES Hardware
diff --git a/Documentation/networking/net-modules.txt b/Documentation/networking/net-modules.txt
index 3830a83513d..0b27863f155 100644
--- a/Documentation/networking/net-modules.txt
+++ b/Documentation/networking/net-modules.txt
@@ -284,9 +284,6 @@ ppp.c:
seeq8005.c: *Not modularized*
(Probes ports: 0x300, 0x320, 0x340, 0x360)
-sk_g16.c: *Not modularized*
- (Probes ports: 0x100, 0x180, 0x208, 0x220m 0x288, 0x320, 0x328, 0x390)
-
skeleton.c: *Skeleton*
slhc.c:
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index d639cb8dc46..72cdf19e1be 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -54,6 +54,7 @@
#include <linux/config.h>
#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/compiler.h>
#include <linux/netdevice.h>
@@ -91,16 +92,17 @@ KERN_INFO DRV_NAME ": 10/100 PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE
MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
MODULE_DESCRIPTION("RealTek RTL-8139C+ series 10/100 PCI Ethernet driver");
+MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
static int debug = -1;
-MODULE_PARM (debug, "i");
+module_param(debug, int, 0);
MODULE_PARM_DESC (debug, "8139cp: bitmapped message enable number");
/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
The RTL chips use a 64 element hash table based on the Ethernet CRC. */
static int multicast_filter_limit = 32;
-MODULE_PARM (multicast_filter_limit, "i");
+module_param(multicast_filter_limit, int, 0);
MODULE_PARM_DESC (multicast_filter_limit, "8139cp: maximum number of filtered multicast addresses");
#define PFX DRV_NAME ": "
@@ -186,6 +188,9 @@ enum {
RingEnd = (1 << 30), /* End of descriptor ring */
FirstFrag = (1 << 29), /* First segment of a packet */
LastFrag = (1 << 28), /* Final segment of a packet */
+ LargeSend = (1 << 27), /* TCP Large Send Offload (TSO) */
+ MSSShift = 16, /* MSS value position */
+ MSSMask = 0xfff, /* MSS value: 11 bits */
TxError = (1 << 23), /* Tx error summary */
RxError = (1 << 20), /* Rx error summary */
IPCS = (1 << 18), /* Calculate IP checksum */
@@ -312,7 +317,7 @@ struct cp_desc {
struct ring_info {
struct sk_buff *skb;
dma_addr_t mapping;
- unsigned frag;
+ u32 len;
};
struct cp_dma_stats {
@@ -394,6 +399,9 @@ struct cp_private {
static void __cp_set_rx_mode (struct net_device *dev);
static void cp_tx (struct cp_private *cp);
static void cp_clean_rings (struct cp_private *cp);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void cp_poll_controller(struct net_device *dev);
+#endif
static struct pci_device_id cp_pci_tbl[] = {
{ PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139,
@@ -688,6 +696,19 @@ cp_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
return IRQ_HANDLED;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void cp_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ cp_interrupt(dev->irq, dev, NULL);
+ enable_irq(dev->irq);
+}
+#endif
+
static void cp_tx (struct cp_private *cp)
{
unsigned tx_head = cp->tx_head;
@@ -707,7 +728,7 @@ static void cp_tx (struct cp_private *cp)
BUG();
pci_unmap_single(cp->pdev, cp->tx_skb[tx_tail].mapping,
- skb->len, PCI_DMA_TODEVICE);
+ cp->tx_skb[tx_tail].len, PCI_DMA_TODEVICE);
if (status & LastFrag) {
if (status & (TxError | TxFIFOUnder)) {
@@ -749,10 +770,11 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev)
{
struct cp_private *cp = netdev_priv(dev);
unsigned entry;
- u32 eor;
+ u32 eor, flags;
#if CP_VLAN_TAG_USED
u32 vlan_tag = 0;
#endif
+ int mss = 0;
spin_lock_irq(&cp->lock);
@@ -772,6 +794,9 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev)
entry = cp->tx_head;
eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0;
+ if (dev->features & NETIF_F_TSO)
+ mss = skb_shinfo(skb)->tso_size;
+
if (skb_shinfo(skb)->nr_frags == 0) {
struct cp_desc *txd = &cp->tx_ring[entry];
u32 len;
@@ -783,26 +808,26 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev)
txd->addr = cpu_to_le64(mapping);
wmb();
- if (skb->ip_summed == CHECKSUM_HW) {
+ flags = eor | len | DescOwn | FirstFrag | LastFrag;
+
+ if (mss)
+ flags |= LargeSend | ((mss & MSSMask) << MSSShift);
+ else if (skb->ip_summed == CHECKSUM_HW) {
const struct iphdr *ip = skb->nh.iph;
if (ip->protocol == IPPROTO_TCP)
- txd->opts1 = cpu_to_le32(eor | len | DescOwn |
- FirstFrag | LastFrag |
- IPCS | TCPCS);
+ flags |= IPCS | TCPCS;
else if (ip->protocol == IPPROTO_UDP)
- txd->opts1 = cpu_to_le32(eor | len | DescOwn |
- FirstFrag | LastFrag |
- IPCS | UDPCS);
+ flags |= IPCS | UDPCS;
else
- BUG();
- } else
- txd->opts1 = cpu_to_le32(eor | len | DescOwn |
- FirstFrag | LastFrag);
+ WARN_ON(1); /* we need a WARN() */
+ }
+
+ txd->opts1 = cpu_to_le32(flags);
wmb();
cp->tx_skb[entry].skb = skb;
cp->tx_skb[entry].mapping = mapping;
- cp->tx_skb[entry].frag = 0;
+ cp->tx_skb[entry].len = len;
entry = NEXT_TX(entry);
} else {
struct cp_desc *txd;
@@ -820,7 +845,7 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev)
first_len, PCI_DMA_TODEVICE);
cp->tx_skb[entry].skb = skb;
cp->tx_skb[entry].mapping = first_mapping;
- cp->tx_skb[entry].frag = 1;
+ cp->tx_skb[entry].len = first_len;
entry = NEXT_TX(entry);
for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
@@ -836,16 +861,19 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev)
len, PCI_DMA_TODEVICE);
eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0;
- if (skb->ip_summed == CHECKSUM_HW) {
- ctrl = eor | len | DescOwn | IPCS;
+ ctrl = eor | len | DescOwn;
+
+ if (mss)
+ ctrl |= LargeSend |
+ ((mss & MSSMask) << MSSShift);
+ else if (skb->ip_summed == CHECKSUM_HW) {
if (ip->protocol == IPPROTO_TCP)
- ctrl |= TCPCS;
+ ctrl |= IPCS | TCPCS;
else if (ip->protocol == IPPROTO_UDP)
- ctrl |= UDPCS;
+ ctrl |= IPCS | UDPCS;
else
BUG();
- } else
- ctrl = eor | len | DescOwn;
+ }
if (frag == skb_shinfo(skb)->nr_frags - 1)
ctrl |= LastFrag;
@@ -860,7 +888,7 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev)
cp->tx_skb[entry].skb = skb;
cp->tx_skb[entry].mapping = mapping;
- cp->tx_skb[entry].frag = frag + 2;
+ cp->tx_skb[entry].len = len;
entry = NEXT_TX(entry);
}
@@ -1074,7 +1102,6 @@ static int cp_refill_rx (struct cp_private *cp)
cp->rx_skb[i].mapping = pci_map_single(cp->pdev,
skb->tail, cp->rx_buf_sz, PCI_DMA_FROMDEVICE);
cp->rx_skb[i].skb = skb;
- cp->rx_skb[i].frag = 0;
cp->rx_ring[i].opts2 = 0;
cp->rx_ring[i].addr = cpu_to_le64(cp->rx_skb[i].mapping);
@@ -1126,9 +1153,6 @@ static void cp_clean_rings (struct cp_private *cp)
{
unsigned i;
- memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE);
- memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE);
-
for (i = 0; i < CP_RX_RING_SIZE; i++) {
if (cp->rx_skb[i].skb) {
pci_unmap_single(cp->pdev, cp->rx_skb[i].mapping,
@@ -1140,13 +1164,18 @@ static void cp_clean_rings (struct cp_private *cp)
for (i = 0; i < CP_TX_RING_SIZE; i++) {
if (cp->tx_skb[i].skb) {
struct sk_buff *skb = cp->tx_skb[i].skb;
+
pci_unmap_single(cp->pdev, cp->tx_skb[i].mapping,
- skb->len, PCI_DMA_TODEVICE);
- dev_kfree_skb(skb);
+ cp->tx_skb[i].len, PCI_DMA_TODEVICE);
+ if (le32_to_cpu(cp->tx_ring[i].opts1) & LastFrag)
+ dev_kfree_skb(skb);
cp->net_stats.tx_dropped++;
}
}
+ memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE);
+ memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE);
+
memset(&cp->rx_skb, 0, sizeof(struct ring_info) * CP_RX_RING_SIZE);
memset(&cp->tx_skb, 0, sizeof(struct ring_info) * CP_TX_RING_SIZE);
}
@@ -1538,6 +1567,8 @@ static struct ethtool_ops cp_ethtool_ops = {
.set_tx_csum = ethtool_op_set_tx_csum, /* local! */
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = ethtool_op_set_tso,
.get_regs = cp_get_regs,
.get_wol = cp_get_wol,
.set_wol = cp_set_wol,
@@ -1749,6 +1780,9 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
dev->get_stats = cp_get_stats;
dev->do_ioctl = cp_ioctl;
dev->poll = cp_rx_poll;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = cp_poll_controller;
+#endif
dev->weight = 16; /* arbitrary? from NAPI_HOWTO.txt. */
#ifdef BROKEN
dev->change_mtu = cp_change_mtu;
@@ -1768,6 +1802,10 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (pci_using_dac)
dev->features |= NETIF_F_HIGHDMA;
+#if 0 /* disabled by default until verified */
+ dev->features |= NETIF_F_TSO;
+#endif
+
dev->irq = pdev->irq;
rc = register_netdev(dev);
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index d4bd20c21a1..047202c4d9a 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -569,7 +569,7 @@ struct rtl_extra_stats {
};
struct rtl8139_private {
- void *mmio_addr;
+ void __iomem *mmio_addr;
int drv_flags;
struct pci_dev *pci_dev;
u32 msg_enable;
@@ -614,7 +614,7 @@ MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered mu
MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
-static int read_eeprom (void *ioaddr, int location, int addr_len);
+static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
static int rtl8139_open (struct net_device *dev);
static int mdio_read (struct net_device *dev, int phy_id, int location);
static void mdio_write (struct net_device *dev, int phy_id, int location,
@@ -638,46 +638,20 @@ static void __set_rx_mode (struct net_device *dev);
static void rtl8139_hw_start (struct net_device *dev);
static struct ethtool_ops rtl8139_ethtool_ops;
-#ifdef USE_IO_OPS
-
-#define RTL_R8(reg) inb (((unsigned long)ioaddr) + (reg))
-#define RTL_R16(reg) inw (((unsigned long)ioaddr) + (reg))
-#define RTL_R32(reg) ((unsigned long) inl (((unsigned long)ioaddr) + (reg)))
-#define RTL_W8(reg, val8) outb ((val8), ((unsigned long)ioaddr) + (reg))
-#define RTL_W16(reg, val16) outw ((val16), ((unsigned long)ioaddr) + (reg))
-#define RTL_W32(reg, val32) outl ((val32), ((unsigned long)ioaddr) + (reg))
-#define RTL_W8_F RTL_W8
-#define RTL_W16_F RTL_W16
-#define RTL_W32_F RTL_W32
-#undef readb
-#undef readw
-#undef readl
-#undef writeb
-#undef writew
-#undef writel
-#define readb(addr) inb((unsigned long)(addr))
-#define readw(addr) inw((unsigned long)(addr))
-#define readl(addr) inl((unsigned long)(addr))
-#define writeb(val,addr) outb((val),(unsigned long)(addr))
-#define writew(val,addr) outw((val),(unsigned long)(addr))
-#define writel(val,addr) outl((val),(unsigned long)(addr))
-
-#else
-
/* write MMIO register, with flush */
/* Flush avoids rtl8139 bug w/ posted MMIO writes */
-#define RTL_W8_F(reg, val8) do { writeb ((val8), ioaddr + (reg)); readb (ioaddr + (reg)); } while (0)
-#define RTL_W16_F(reg, val16) do { writew ((val16), ioaddr + (reg)); readw (ioaddr + (reg)); } while (0)
-#define RTL_W32_F(reg, val32) do { writel ((val32), ioaddr + (reg)); readl (ioaddr + (reg)); } while (0)
+#define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0)
+#define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0)
+#define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0)
#define MMIO_FLUSH_AUDIT_COMPLETE 1
#if MMIO_FLUSH_AUDIT_COMPLETE
/* write MMIO register */
-#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg))
-#define RTL_W16(reg, val16) writew ((val16), ioaddr + (reg))
-#define RTL_W32(reg, val32) writel ((val32), ioaddr + (reg))
+#define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg))
+#define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg))
+#define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg))
#else
@@ -689,11 +663,9 @@ static struct ethtool_ops rtl8139_ethtool_ops;
#endif /* MMIO_FLUSH_AUDIT_COMPLETE */
/* read MMIO register */
-#define RTL_R8(reg) readb (ioaddr + (reg))
-#define RTL_R16(reg) readw (ioaddr + (reg))
-#define RTL_R32(reg) ((unsigned long) readl (ioaddr + (reg)))
-
-#endif /* USE_IO_OPS */
+#define RTL_R8(reg) ioread8 (ioaddr + (reg))
+#define RTL_R16(reg) ioread16 (ioaddr + (reg))
+#define RTL_R32(reg) ((unsigned long) ioread32 (ioaddr + (reg)))
static const u16 rtl8139_intr_mask =
@@ -740,10 +712,13 @@ static void __rtl8139_cleanup_dev (struct net_device *dev)
assert (tp->pci_dev != NULL);
pdev = tp->pci_dev;
-#ifndef USE_IO_OPS
+#ifdef USE_IO_OPS
+ if (tp->mmio_addr)
+ ioport_unmap (tp->mmio_addr);
+#else
if (tp->mmio_addr)
- iounmap (tp->mmio_addr);
-#endif /* !USE_IO_OPS */
+ pci_iounmap (pdev, tp->mmio_addr);
+#endif /* USE_IO_OPS */
/* it's ok to call this even if we have no regions to free */
pci_release_regions (pdev);
@@ -753,7 +728,7 @@ static void __rtl8139_cleanup_dev (struct net_device *dev)
}
-static void rtl8139_chip_reset (void *ioaddr)
+static void rtl8139_chip_reset (void __iomem *ioaddr)
{
int i;
@@ -773,7 +748,7 @@ static void rtl8139_chip_reset (void *ioaddr)
static int __devinit rtl8139_init_board (struct pci_dev *pdev,
struct net_device **dev_out)
{
- void *ioaddr;
+ void __iomem *ioaddr;
struct net_device *dev;
struct rtl8139_private *tp;
u8 tmp8;
@@ -855,13 +830,18 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
pci_set_master (pdev);
#ifdef USE_IO_OPS
- ioaddr = (void *) pio_start;
+ ioaddr = ioport_map(pio_start, pio_len);
+ if (!ioaddr) {
+ printk (KERN_ERR PFX "%s: cannot map PIO, aborting\n", pci_name(pdev));
+ rc = -EIO;
+ goto err_out;
+ }
dev->base_addr = pio_start;
tp->mmio_addr = ioaddr;
tp->regs_len = pio_len;
#else
/* ioremap MMIO region */
- ioaddr = ioremap (mmio_start, mmio_len);
+ ioaddr = pci_iomap(pdev, 1, 0);
if (ioaddr == NULL) {
printk (KERN_ERR PFX "%s: cannot remap MMIO, aborting\n", pci_name(pdev));
rc = -EIO;
@@ -947,7 +927,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
struct net_device *dev = NULL;
struct rtl8139_private *tp;
int i, addr_len, option;
- void *ioaddr;
+ void __iomem *ioaddr;
static int board_idx = -1;
u8 pci_rev;
@@ -1147,47 +1127,46 @@ static void __devexit rtl8139_remove_one (struct pci_dev *pdev)
No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
*/
-#define eeprom_delay() readl(ee_addr)
+#define eeprom_delay() RTL_R32(Cfg9346)
/* The EEPROM commands include the alway-set leading bit. */
#define EE_WRITE_CMD (5)
#define EE_READ_CMD (6)
#define EE_ERASE_CMD (7)
-static int __devinit read_eeprom (void *ioaddr, int location, int addr_len)
+static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len)
{
int i;
unsigned retval = 0;
- void *ee_addr = ioaddr + Cfg9346;
int read_cmd = location | (EE_READ_CMD << addr_len);
- writeb (EE_ENB & ~EE_CS, ee_addr);
- writeb (EE_ENB, ee_addr);
+ RTL_W8 (Cfg9346, EE_ENB & ~EE_CS);
+ RTL_W8 (Cfg9346, EE_ENB);
eeprom_delay ();
/* Shift the read command bits out. */
for (i = 4 + addr_len; i >= 0; i--) {
int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
- writeb (EE_ENB | dataval, ee_addr);
+ RTL_W8 (Cfg9346, EE_ENB | dataval);
eeprom_delay ();
- writeb (EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
+ RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK);
eeprom_delay ();
}
- writeb (EE_ENB, ee_addr);
+ RTL_W8 (Cfg9346, EE_ENB);
eeprom_delay ();
for (i = 16; i > 0; i--) {
- writeb (EE_ENB | EE_SHIFT_CLK, ee_addr);
+ RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK);
eeprom_delay ();
retval =
- (retval << 1) | ((readb (ee_addr) & EE_DATA_READ) ? 1 :
+ (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 :
0);
- writeb (EE_ENB, ee_addr);
+ RTL_W8 (Cfg9346, EE_ENB);
eeprom_delay ();
}
/* Terminate the EEPROM access. */
- writeb (~EE_CS, ee_addr);
+ RTL_W8 (Cfg9346, ~EE_CS);
eeprom_delay ();
return retval;
@@ -1206,7 +1185,7 @@ static int __devinit read_eeprom (void *ioaddr, int location, int addr_len)
#define MDIO_WRITE0 (MDIO_DIR)
#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
-#define mdio_delay(mdio_addr) readb(mdio_addr)
+#define mdio_delay() RTL_R8(Config4)
static char mii_2_8139_map[8] = {
@@ -1223,15 +1202,15 @@ static char mii_2_8139_map[8] = {
#ifdef CONFIG_8139TOO_8129
/* Syncronize the MII management interface by shifting 32 one bits out. */
-static void mdio_sync (void *mdio_addr)
+static void mdio_sync (void __iomem *ioaddr)
{
int i;
for (i = 32; i >= 0; i--) {
- writeb (MDIO_WRITE1, mdio_addr);
- mdio_delay (mdio_addr);
- writeb (MDIO_WRITE1 | MDIO_CLK, mdio_addr);
- mdio_delay (mdio_addr);
+ RTL_W8 (Config4, MDIO_WRITE1);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK);
+ mdio_delay ();
}
}
#endif
@@ -1241,35 +1220,36 @@ static int mdio_read (struct net_device *dev, int phy_id, int location)
struct rtl8139_private *tp = netdev_priv(dev);
int retval = 0;
#ifdef CONFIG_8139TOO_8129
- void *mdio_addr = tp->mmio_addr + Config4;
+ void __iomem *ioaddr = tp->mmio_addr;
int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
int i;
#endif
if (phy_id > 31) { /* Really a 8139. Use internal registers. */
+ void __iomem *ioaddr = tp->mmio_addr;
return location < 8 && mii_2_8139_map[location] ?
- readw (tp->mmio_addr + mii_2_8139_map[location]) : 0;
+ RTL_R16 (mii_2_8139_map[location]) : 0;
}
#ifdef CONFIG_8139TOO_8129
- mdio_sync (mdio_addr);
+ mdio_sync (ioaddr);
/* Shift the read command bits out. */
for (i = 15; i >= 0; i--) {
int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
- writeb (MDIO_DIR | dataval, mdio_addr);
- mdio_delay (mdio_addr);
- writeb (MDIO_DIR | dataval | MDIO_CLK, mdio_addr);
- mdio_delay (mdio_addr);
+ RTL_W8 (Config4, MDIO_DIR | dataval);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK);
+ mdio_delay ();
}
/* Read the two transition, 16 data, and wire-idle bits. */
for (i = 19; i > 0; i--) {
- writeb (0, mdio_addr);
- mdio_delay (mdio_addr);
- retval = (retval << 1) | ((readb (mdio_addr) & MDIO_DATA_IN) ? 1 : 0);
- writeb (MDIO_CLK, mdio_addr);
- mdio_delay (mdio_addr);
+ RTL_W8 (Config4, 0);
+ mdio_delay ();
+ retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0);
+ RTL_W8 (Config4, MDIO_CLK);
+ mdio_delay ();
}
#endif
@@ -1282,13 +1262,13 @@ static void mdio_write (struct net_device *dev, int phy_id, int location,
{
struct rtl8139_private *tp = netdev_priv(dev);
#ifdef CONFIG_8139TOO_8129
- void *mdio_addr = tp->mmio_addr + Config4;
+ void __iomem *ioaddr = tp->mmio_addr;
int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
int i;
#endif
if (phy_id > 31) { /* Really a 8139. Use internal registers. */
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
if (location == 0) {
RTL_W8 (Cfg9346, Cfg9346_Unlock);
RTL_W16 (BasicModeCtrl, value);
@@ -1299,23 +1279,23 @@ static void mdio_write (struct net_device *dev, int phy_id, int location,
}
#ifdef CONFIG_8139TOO_8129
- mdio_sync (mdio_addr);
+ mdio_sync (ioaddr);
/* Shift the command bits out. */
for (i = 31; i >= 0; i--) {
int dataval =
(mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
- writeb (dataval, mdio_addr);
- mdio_delay (mdio_addr);
- writeb (dataval | MDIO_CLK, mdio_addr);
- mdio_delay (mdio_addr);
+ RTL_W8 (Config4, dataval);
+ mdio_delay ();
+ RTL_W8 (Config4, dataval | MDIO_CLK);
+ mdio_delay ();
}
/* Clear out extra bits. */
for (i = 2; i > 0; i--) {
- writeb (0, mdio_addr);
- mdio_delay (mdio_addr);
- writeb (MDIO_CLK, mdio_addr);
- mdio_delay (mdio_addr);
+ RTL_W8 (Config4, 0);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_CLK);
+ mdio_delay ();
}
#endif
}
@@ -1325,7 +1305,7 @@ static int rtl8139_open (struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
int retval;
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
retval = request_irq (dev->irq, rtl8139_interrupt, SA_SHIRQ, dev->name, dev);
if (retval)
@@ -1382,7 +1362,7 @@ static void rtl_check_media (struct net_device *dev, unsigned int init_media)
static void rtl8139_hw_start (struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
u32 i;
u8 tmp;
@@ -1484,7 +1464,7 @@ static void rtl8139_tune_twister (struct net_device *dev,
struct rtl8139_private *tp)
{
int linkcase;
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
/* This is a complicated state machine to configure the "twister" for
impedance/echos based on the cable length.
@@ -1568,7 +1548,7 @@ static void rtl8139_tune_twister (struct net_device *dev,
static inline void rtl8139_thread_iter (struct net_device *dev,
struct rtl8139_private *tp,
- void *ioaddr)
+ void __iomem *ioaddr)
{
int mii_lpa;
@@ -1676,7 +1656,7 @@ static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
static void rtl8139_tx_timeout (struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
int i;
u8 tmp8;
unsigned long flags;
@@ -1721,7 +1701,7 @@ static void rtl8139_tx_timeout (struct net_device *dev)
static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
unsigned int entry;
unsigned int len = skb->len;
@@ -1763,7 +1743,7 @@ static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
static void rtl8139_tx_interrupt (struct net_device *dev,
struct rtl8139_private *tp,
- void *ioaddr)
+ void __iomem *ioaddr)
{
unsigned long dirty_tx, tx_left;
@@ -1833,7 +1813,7 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
/* TODO: clean this up! Rx reset need not be this intensive */
static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
- struct rtl8139_private *tp, void *ioaddr)
+ struct rtl8139_private *tp, void __iomem *ioaddr)
{
u8 tmp8;
#ifdef CONFIG_8139_OLD_RX_RESET
@@ -1930,7 +1910,7 @@ static __inline__ void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
static void rtl8139_isr_ack(struct rtl8139_private *tp)
{
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
u16 status;
status = RTL_R16 (IntrStatus) & RxAckBits;
@@ -1949,7 +1929,7 @@ static void rtl8139_isr_ack(struct rtl8139_private *tp)
static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
int budget)
{
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
int received = 0;
unsigned char *rx_ring = tp->rx_ring;
unsigned int cur_rx = tp->cur_rx;
@@ -2087,7 +2067,7 @@ out:
static void rtl8139_weird_interrupt (struct net_device *dev,
struct rtl8139_private *tp,
- void *ioaddr,
+ void __iomem *ioaddr,
int status, int link_changed)
{
DPRINTK ("%s: Abnormal interrupt, status %8.8x.\n",
@@ -2127,7 +2107,7 @@ static void rtl8139_weird_interrupt (struct net_device *dev,
static int rtl8139_poll(struct net_device *dev, int *budget)
{
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
int orig_budget = min(*budget, dev->quota);
int done = 1;
@@ -2165,7 +2145,7 @@ static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance,
{
struct net_device *dev = (struct net_device *) dev_instance;
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
u16 status, ackstat;
int link_changed = 0; /* avoid bogus "uninit" warning */
int handled = 0;
@@ -2241,7 +2221,7 @@ static void rtl8139_poll_controller(struct net_device *dev)
static int rtl8139_close (struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
int ret = 0;
unsigned long flags;
@@ -2304,7 +2284,7 @@ static int rtl8139_close (struct net_device *dev)
static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct rtl8139_private *np = netdev_priv(dev);
- void *ioaddr = np->mmio_addr;
+ void __iomem *ioaddr = np->mmio_addr;
spin_lock_irq(&np->lock);
if (rtl_chip_info[np->chipset].flags & HasLWake) {
@@ -2338,7 +2318,7 @@ static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct rtl8139_private *np = netdev_priv(dev);
- void *ioaddr = np->mmio_addr;
+ void __iomem *ioaddr = np->mmio_addr;
u32 support;
u8 cfg3, cfg5;
@@ -2506,7 +2486,7 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
unsigned long flags;
if (netif_running(dev)) {
@@ -2525,7 +2505,7 @@ static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
static void __set_rx_mode (struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
u32 mc_filter[2]; /* Multicast hash filter */
int i, rx_mode;
u32 tmp;
@@ -2586,7 +2566,7 @@ static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata (pdev);
struct rtl8139_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
+ void __iomem *ioaddr = tp->mmio_addr;
unsigned long flags;
pci_save_state (pdev);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f08e01b2fd1..fa9f76c953d 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -824,6 +824,18 @@ config SMC9194
<file:Documentation/networking/net-modules.txt>. The module
will be called smc9194.
+config DM9000
+ tristate "DM9000 support"
+ depends on ARM && NET_ETHERNET
+ select CRC32
+ select MII
+ ---help---
+ Support for DM9000 chipset.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module will be
+ called dm9000.
+
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
depends on NET_ETHERNET && ISA
@@ -989,21 +1001,6 @@ config EEXPRESS_PRO
<file:Documentation/networking/net-modules.txt>. The module
will be called eepro.
-config FMV18X
- tristate "FMV-181/182/183/184 support (OBSOLETE)"
- depends on NET_ISA && OBSOLETE
- ---help---
- If you have a Fujitsu FMV-181/182/183/184 network (Ethernet) card,
- say Y and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- If you use an FMV-183 or FMV-184 and it is not working, you may need
- to disable Plug & Play mode of the card.
-
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
- will be called fmv18x.
-
config HPLAN_PLUS
tristate "HP PCLAN+ (27247B and 27252A) support"
depends on NET_ISA
@@ -1092,14 +1089,6 @@ config SEEQ8005
<file:Documentation/networking/net-modules.txt>. The module
will be called seeq8005.
-config SK_G16
- tristate "SK_G16 support (OBSOLETE)"
- depends on NET_ISA && OBSOLETE
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
config SKMC
tristate "SKnet MCA support"
depends on NET_ETHERNET && MCA && BROKEN
@@ -1932,6 +1921,18 @@ config R8169_VLAN
If in doubt, say Y.
+config SKGE
+ tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL
+ select CRC32
+ ---help---
+ This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
+ and related Gigabit Ethernet adapters. It is a new smaller driver
+ driver with better performance and more complete ethtool support.
+
+ It does not support the link failover and network management
+ features that "portable" vendor supplied sk98lin driver does.
+
config SK98LIN
tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support"
depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 30c7567001f..63c6d1e6d4d 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_FEALNX) += fealnx.o
obj-$(CONFIG_TIGON3) += tg3.o
obj-$(CONFIG_BNX2) += bnx2.o
obj-$(CONFIG_TC35815) += tc35815.o
+obj-$(CONFIG_SKGE) += skge.o
obj-$(CONFIG_SK98LIN) += sk98lin/
obj-$(CONFIG_SKFP) += skfp/
obj-$(CONFIG_VIA_RHINE) += via-rhine.o
@@ -74,7 +75,6 @@ obj-$(CONFIG_MAC8390) += mac8390.o 8390.o
obj-$(CONFIG_APNE) += apne.o 8390.o
obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
obj-$(CONFIG_SHAPER) += shaper.o
-obj-$(CONFIG_SK_G16) += sk_g16.o
obj-$(CONFIG_HP100) += hp100.o
obj-$(CONFIG_SMC9194) += smc9194.o
obj-$(CONFIG_FEC) += fec.o
@@ -122,7 +122,6 @@ obj-$(CONFIG_DEFXX) += defxx.o
obj-$(CONFIG_SGISEEQ) += sgiseeq.o
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
obj-$(CONFIG_AT1700) += at1700.o
-obj-$(CONFIG_FMV18X) += fmv18x.o
obj-$(CONFIG_EL1) += 3c501.o
obj-$(CONFIG_EL16) += 3c507.o
obj-$(CONFIG_ELMC) += 3c523.o
@@ -180,6 +179,7 @@ obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
obj-$(CONFIG_IBMVETH) += ibmveth.o
obj-$(CONFIG_S2IO) += s2io.o
obj-$(CONFIG_SMC91X) += smc91x.o
+obj-$(CONFIG_DM9000) += dm9000.o
obj-$(CONFIG_FEC_8XX) += fec_8xx/
obj-$(CONFIG_ARM) += arm/
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index fb433325aa2..3707df6b0cf 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -210,9 +210,6 @@ static struct devprobe2 isa_probes[] __initdata = {
#ifdef CONFIG_AT1700
{at1700_probe, 0},
#endif
-#ifdef CONFIG_FMV18X /* Fujitsu FMV-181/182 */
- {fmv18x_probe, 0},
-#endif
#ifdef CONFIG_ETH16I
{eth16i_probe, 0}, /* ICL EtherTeam 16i/32 */
#endif
@@ -243,9 +240,6 @@ static struct devprobe2 isa_probes[] __initdata = {
#ifdef CONFIG_ELPLUS /* 3c505 */
{elplus_probe, 0},
#endif
-#ifdef CONFIG_SK_G16
- {SK_init, 0},
-#endif
#ifdef CONFIG_NI5010
{ni5010_probe, 0},
#endif
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index 942a2819576..2e28c201dcc 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -68,6 +68,7 @@ struct etherh_priv {
void __iomem *dma_base;
unsigned int id;
void __iomem *ctrl_port;
+ void __iomem *base;
unsigned char ctrl;
u32 supported;
};
@@ -177,7 +178,7 @@ etherh_setif(struct net_device *dev)
switch (etherh_priv(dev)->id) {
case PROD_I3_ETHERLAN600:
case PROD_I3_ETHERLAN600A:
- addr = (void *)dev->base_addr + EN0_RCNTHI;
+ addr = etherh_priv(dev)->base + EN0_RCNTHI;
switch (dev->if_port) {
case IF_PORT_10BASE2:
@@ -218,7 +219,7 @@ etherh_getifstat(struct net_device *dev)
switch (etherh_priv(dev)->id) {
case PROD_I3_ETHERLAN600:
case PROD_I3_ETHERLAN600A:
- addr = (void *)dev->base_addr + EN0_RCNTHI;
+ addr = etherh_priv(dev)->base + EN0_RCNTHI;
switch (dev->if_port) {
case IF_PORT_10BASE2:
stat = 1;
@@ -281,7 +282,7 @@ static void
etherh_reset(struct net_device *dev)
{
struct ei_device *ei_local = netdev_priv(dev);
- void __iomem *addr = (void *)dev->base_addr;
+ void __iomem *addr = etherh_priv(dev)->base;
writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr);
@@ -327,7 +328,7 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf
ei_local->dmaing = 1;
- addr = (void *)dev->base_addr;
+ addr = etherh_priv(dev)->base;
dma_base = etherh_priv(dev)->dma_base;
count = (count + 1) & ~1;
@@ -387,7 +388,7 @@ etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int
ei_local->dmaing = 1;
- addr = (void *)dev->base_addr;
+ addr = etherh_priv(dev)->base;
dma_base = etherh_priv(dev)->dma_base;
buf = skb->data;
@@ -427,7 +428,7 @@ etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_p
ei_local->dmaing = 1;
- addr = (void *)dev->base_addr;
+ addr = etherh_priv(dev)->base;
dma_base = etherh_priv(dev)->dma_base;
writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
@@ -696,7 +697,8 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
eh->ctrl_port = eh->ioc_fast;
}
- dev->base_addr = (unsigned long)eh->memc + data->ns8390_offset;
+ eh->base = eh->memc + data->ns8390_offset;
+ dev->base_addr = (unsigned long)eh->base;
eh->dma_base = eh->memc + data->dataport_offset;
eh->ctrl_port += data->ctrlport_offset;
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 5a2efd343db..c82b9cd1c92 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -1681,10 +1681,6 @@ static int au1000_init(struct net_device *dev)
control |= MAC_FULL_DUPLEX;
}
- /* fix for startup without cable */
- if (!link)
- dev->flags &= ~IFF_RUNNING;
-
aup->mac->control = control;
aup->mac->vlan1_tag = 0x8100; /* activate vlan support */
au_sync();
@@ -1709,16 +1705,14 @@ static void au1000_timer(unsigned long data)
if_port = dev->if_port;
if (aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed) == 0) {
if (link) {
- if (!(dev->flags & IFF_RUNNING)) {
+ if (!netif_carrier_ok(dev)) {
netif_carrier_on(dev);
- dev->flags |= IFF_RUNNING;
printk(KERN_INFO "%s: link up\n", dev->name);
}
}
else {
- if (dev->flags & IFF_RUNNING) {
+ if (netif_carrier_ok(dev)) {
netif_carrier_off(dev);
- dev->flags &= ~IFF_RUNNING;
dev->if_port = 0;
printk(KERN_INFO "%s: link down\n", dev->name);
}
diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c
index 734bd4ee3f9..00e5257b176 100644
--- a/drivers/net/bmac.c
+++ b/drivers/net/bmac.c
@@ -1412,7 +1412,6 @@ static int bmac_open(struct net_device *dev)
bp->opened = 1;
bmac_reset_and_enable(dev);
enable_irq(dev->irq);
- dev->flags |= IFF_RUNNING;
return 0;
}
@@ -1425,7 +1424,6 @@ static int bmac_close(struct net_device *dev)
int i;
bp->sleeping = 1;
- dev->flags &= ~(IFF_UP | IFF_RUNNING);
/* disable rx and tx */
config = bmread(dev, RXCFG);
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
new file mode 100644
index 00000000000..f4ba0ffb863
--- /dev/null
+++ b/drivers/net/dm9000.c
@@ -0,0 +1,1219 @@
+/*
+ * dm9000.c: Version 1.2 03/18/2003
+ *
+ * A Davicom DM9000 ISA NIC fast Ethernet driver for Linux.
+ * Copyright (C) 1997 Sten Wang
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
+ *
+ * V0.11 06/20/2001 REG_0A bit3=1, default enable BP with DA match
+ * 06/22/2001 Support DM9801 progrmming
+ * E3: R25 = ((R24 + NF) & 0x00ff) | 0xf000
+ * E4: R25 = ((R24 + NF) & 0x00ff) | 0xc200
+ * R17 = (R17 & 0xfff0) | NF + 3
+ * E5: R25 = ((R24 + NF - 3) & 0x00ff) | 0xc200
+ * R17 = (R17 & 0xfff0) | NF
+ *
+ * v1.00 modify by simon 2001.9.5
+ * change for kernel 2.4.x
+ *
+ * v1.1 11/09/2001 fix force mode bug
+ *
+ * v1.2 03/18/2003 Weilun Huang <weilun_huang@davicom.com.tw>:
+ * Fixed phy reset.
+ * Added tx/rx 32 bit mode.
+ * Cleaned up for kernel merge.
+ *
+ * 03/03/2004 Sascha Hauer <s.hauer@pengutronix.de>
+ * Port to 2.6 kernel
+ *
+ * 24-Sep-2004 Ben Dooks <ben@simtec.co.uk>
+ * Cleanup of code to remove ifdefs
+ * Allowed platform device data to influence access width
+ * Reformatting areas of code
+ *
+ * 17-Mar-2005 Sascha Hauer <s.hauer@pengutronix.de>
+ * * removed 2.4 style module parameters
+ * * removed removed unused stat counter and fixed
+ * net_device_stats
+ * * introduced tx_timeout function
+ * * reworked locking
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/version.h>
+#include <linux/spinlock.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/dm9000.h>
+#include <linux/delay.h>
+
+#include <asm/delay.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include "dm9000.h"
+
+/* Board/System/Debug information/definition ---------------- */
+
+#define DM9000_PHY 0x40 /* PHY address 0x01 */
+
+#define TRUE 1
+#define FALSE 0
+
+#define CARDNAME "dm9000"
+#define PFX CARDNAME ": "
+
+#define DM9000_TIMER_WUT jiffies+(HZ*2) /* timer wakeup time : 2 second */
+
+#define DM9000_DEBUG 0
+
+#if DM9000_DEBUG > 2
+#define PRINTK3(args...) printk(CARDNAME ": " args)
+#else
+#define PRINTK3(args...) do { } while(0)
+#endif
+
+#if DM9000_DEBUG > 1
+#define PRINTK2(args...) printk(CARDNAME ": " args)
+#else
+#define PRINTK2(args...) do { } while(0)
+#endif
+
+#if DM9000_DEBUG > 0
+#define PRINTK1(args...) printk(CARDNAME ": " args)
+#define PRINTK(args...) printk(CARDNAME ": " args)
+#else
+#define PRINTK1(args...) do { } while(0)
+#define PRINTK(args...) printk(KERN_DEBUG args)
+#endif
+
+/*
+ * Transmit timeout, default 5 seconds.
+ */
+static int watchdog = 5000;
+module_param(watchdog, int, 0400);
+MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
+
+/* Structure/enum declaration ------------------------------- */
+typedef struct board_info {
+
+ void __iomem *io_addr; /* Register I/O base address */
+ void __iomem *io_data; /* Data I/O address */
+ u16 irq; /* IRQ */
+
+ u16 tx_pkt_cnt;
+ u16 queue_pkt_len;
+ u16 queue_start_addr;
+ u16 dbug_cnt;
+ u8 io_mode; /* 0:word, 2:byte */
+ u8 phy_addr;
+
+ void (*inblk)(void __iomem *port, void *data, int length);
+ void (*outblk)(void __iomem *port, void *data, int length);
+ void (*dumpblk)(void __iomem *port, int length);
+
+ struct resource *addr_res; /* resources found */
+ struct resource *data_res;
+ struct resource *addr_req; /* resources requested */
+ struct resource *data_req;
+ struct resource *irq_res;
+
+ struct timer_list timer;
+ struct net_device_stats stats;
+ unsigned char srom[128];
+ spinlock_t lock;
+
+ struct mii_if_info mii;
+ u32 msg_enable;
+} board_info_t;
+
+/* function declaration ------------------------------------- */
+static int dm9000_probe(struct device *);
+static int dm9000_open(struct net_device *);
+static int dm9000_start_xmit(struct sk_buff *, struct net_device *);
+static int dm9000_stop(struct net_device *);
+static int dm9000_do_ioctl(struct net_device *, struct ifreq *, int);
+
+
+static void dm9000_timer(unsigned long);
+static void dm9000_init_dm9000(struct net_device *);
+
+static struct net_device_stats *dm9000_get_stats(struct net_device *);
+
+static irqreturn_t dm9000_interrupt(int, void *, struct pt_regs *);
+
+static int dm9000_phy_read(struct net_device *dev, int phyaddr_unsused, int reg);
+static void dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg,
+ int value);
+static u16 read_srom_word(board_info_t *, int);
+static void dm9000_rx(struct net_device *);
+static void dm9000_hash_table(struct net_device *);
+
+//#define DM9000_PROGRAM_EEPROM
+#ifdef DM9000_PROGRAM_EEPROM
+static void program_eeprom(board_info_t * db);
+#endif
+/* DM9000 network board routine ---------------------------- */
+
+static void
+dm9000_reset(board_info_t * db)
+{
+ PRINTK1("dm9000x: resetting\n");
+ /* RESET device */
+ writeb(DM9000_NCR, db->io_addr);
+ udelay(200);
+ writeb(NCR_RST, db->io_data);
+ udelay(200);
+}
+
+/*
+ * Read a byte from I/O port
+ */
+static u8
+ior(board_info_t * db, int reg)
+{
+ writeb(reg, db->io_addr);
+ return readb(db->io_data);
+}
+
+/*
+ * Write a byte to I/O port
+ */
+
+static void
+iow(board_info_t * db, int reg, int value)
+{
+ writeb(reg, db->io_addr);
+ writeb(value, db->io_data);
+}
+
+/* routines for sending block to chip */
+
+static void dm9000_outblk_8bit(void __iomem *reg, void *data, int count)
+{
+ writesb(reg, data, count);
+}
+
+static void dm9000_outblk_16bit(void __iomem *reg, void *data, int count)
+{
+ writesw(reg, data, (count+1) >> 1);
+}
+
+static void dm9000_outblk_32bit(void __iomem *reg, void *data, int count)
+{
+ writesl(reg, data, (count+3) >> 2);
+}
+
+/* input block from chip to memory */
+
+static void dm9000_inblk_8bit(void __iomem *reg, void *data, int count)
+{
+ readsb(reg, data, count+1);
+}
+
+
+static void dm9000_inblk_16bit(void __iomem *reg, void *data, int count)
+{
+ readsw(reg, data, (count+1) >> 1);
+}
+
+static void dm9000_inblk_32bit(void __iomem *reg, void *data, int count)
+{
+ readsl(reg, data, (count+3) >> 2);
+}
+
+/* dump block from chip to null */
+
+static void dm9000_dumpblk_8bit(void __iomem *reg, int count)
+{
+ int i;
+ int tmp;
+
+ for (i = 0; i < count; i++)
+ tmp = readb(reg);
+}
+
+static void dm9000_dumpblk_16bit(void __iomem *reg, int count)
+{
+ int i;
+ int tmp;
+
+ count = (count + 1) >> 1;
+
+ for (i = 0; i < count; i++)
+ tmp = readw(reg);
+}
+
+static void dm9000_dumpblk_32bit(void __iomem *reg, int count)
+{
+ int i;
+ int tmp;
+
+ count = (count + 3) >> 2;
+
+ for (i = 0; i < count; i++)
+ tmp = readl(reg);
+}
+
+/* dm9000_set_io
+ *
+ * select the specified set of io routines to use with the
+ * device
+ */
+
+static void dm9000_set_io(struct board_info *db, int byte_width)
+{
+ /* use the size of the data resource to work out what IO
+ * routines we want to use
+ */
+
+ switch (byte_width) {
+ case 1:
+ db->dumpblk = dm9000_dumpblk_8bit;
+ db->outblk = dm9000_outblk_8bit;
+ db->inblk = dm9000_inblk_8bit;
+ break;
+
+ case 2:
+ db->dumpblk = dm9000_dumpblk_16bit;
+ db->outblk = dm9000_outblk_16bit;
+ db->inblk = dm9000_inblk_16bit;
+ break;
+
+ case 3:
+ printk(KERN_ERR PFX ": 3 byte IO, falling back to 16bit\n");
+ db->dumpblk = dm9000_dumpblk_16bit;
+ db->outblk = dm9000_outblk_16bit;
+ db->inblk = dm9000_inblk_16bit;
+ break;
+
+ case 4:
+ default:
+ db->dumpblk = dm9000_dumpblk_32bit;
+ db->outblk = dm9000_outblk_32bit;
+ db->inblk = dm9000_inblk_32bit;
+ break;
+ }
+}
+
+
+/* Our watchdog timed out. Called by the networking layer */
+static void dm9000_timeout(struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+ u8 reg_save;
+ unsigned long flags;
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+ spin_lock_irqsave(db->lock,flags);
+
+ netif_stop_queue(dev);
+ dm9000_reset(db);
+ dm9000_init_dm9000(dev);
+ /* We can accept TX packets again */
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+
+ /* Restore previous register address */
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(db->lock,flags);
+}
+
+
+/* dm9000_release_board
+ *
+ * release a board, and any mapped resources
+ */
+
+static void
+dm9000_release_board(struct platform_device *pdev, struct board_info *db)
+{
+ if (db->data_res == NULL) {
+ if (db->addr_res != NULL)
+ release_mem_region((unsigned long)db->io_addr, 4);
+ return;
+ }
+
+ /* unmap our resources */
+
+ iounmap(db->io_addr);
+ iounmap(db->io_data);
+
+ /* release the resources */
+
+ if (db->data_req != NULL) {
+ release_resource(db->data_req);
+ kfree(db->data_req);
+ }
+
+ if (db->addr_res != NULL) {
+ release_resource(db->data_req);
+ kfree(db->addr_req);
+ }
+}
+
+#define res_size(_r) (((_r)->end - (_r)->start) + 1)
+
+/*
+ * Search DM9000 board, allocate space and register it
+ */
+static int
+dm9000_probe(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct dm9000_plat_data *pdata = pdev->dev.platform_data;
+ struct board_info *db; /* Point a board information structure */
+ struct net_device *ndev;
+ unsigned long base;
+ int ret = 0;
+ int iosize;
+ int i;
+ u32 id_val;
+
+ printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME);
+
+ /* Init network device */
+ ndev = alloc_etherdev(sizeof (struct board_info));
+ if (!ndev) {
+ printk("%s: could not allocate device.\n", CARDNAME);
+ return -ENOMEM;
+ }
+
+ SET_MODULE_OWNER(ndev);
+ SET_NETDEV_DEV(ndev, dev);
+
+ PRINTK2("dm9000_probe()");
+
+ /* setup board info structure */
+ db = (struct board_info *) ndev->priv;
+ memset(db, 0, sizeof (*db));
+
+ if (pdev->num_resources < 2) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ switch (pdev->num_resources) {
+ case 2:
+ base = pdev->resource[0].start;
+
+ if (!request_mem_region(base, 4, ndev->name)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ ndev->base_addr = base;
+ ndev->irq = pdev->resource[1].start;
+ db->io_addr = (void *)base;
+ db->io_data = (void *)(base + 4);
+
+ break;
+
+ case 3:
+ db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ db->irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+ if (db->addr_res == NULL || db->data_res == NULL) {
+ printk(KERN_ERR PFX "insufficient resources\n");
+ ret = -ENOENT;
+ goto out;
+ }
+
+ i = res_size(db->addr_res);
+ db->addr_req = request_mem_region(db->addr_res->start, i,
+ pdev->name);
+
+ if (db->addr_req == NULL) {
+ printk(KERN_ERR PFX "cannot claim address reg area\n");
+ ret = -EIO;
+ goto out;
+ }
+
+ db->io_addr = ioremap(db->addr_res->start, i);
+
+ if (db->io_addr == NULL) {
+ printk(KERN_ERR "failed to ioremap address reg\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ iosize = res_size(db->data_res);
+ db->data_req = request_mem_region(db->data_res->start, iosize,
+ pdev->name);
+
+ if (db->data_req == NULL) {
+ printk(KERN_ERR PFX "cannot claim data reg area\n");
+ ret = -EIO;
+ goto out;
+ }
+
+ db->io_data = ioremap(db->data_res->start, iosize);
+
+ if (db->io_data == NULL) {
+ printk(KERN_ERR "failed to ioremap data reg\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* fill in parameters for net-dev structure */
+
+ ndev->base_addr = (unsigned long)db->io_addr;
+ ndev->irq = db->irq_res->start;
+
+ /* ensure at least we have a default set of IO routines */
+ dm9000_set_io(db, iosize);
+
+ }
+
+ /* check to see if anything is being over-ridden */
+ if (pdata != NULL) {
+ /* check to see if the driver wants to over-ride the
+ * default IO width */
+
+ if (pdata->flags & DM9000_PLATF_8BITONLY)
+ dm9000_set_io(db, 1);
+
+ if (pdata->flags & DM9000_PLATF_16BITONLY)
+ dm9000_set_io(db, 2);
+
+ if (pdata->flags & DM9000_PLATF_32BITONLY)
+ dm9000_set_io(db, 4);
+
+ /* check to see if there are any IO routine
+ * over-rides */
+
+ if (pdata->inblk != NULL)
+ db->inblk = pdata->inblk;
+
+ if (pdata->outblk != NULL)
+ db->outblk = pdata->outblk;
+
+ if (pdata->dumpblk != NULL)
+ db->dumpblk = pdata->dumpblk;
+ }
+
+ dm9000_reset(db);
+
+ /* try two times, DM9000 sometimes gets the first read wrong */
+ for (i = 0; i < 2; i++) {
+ id_val = ior(db, DM9000_VIDL);
+ id_val |= (u32)ior(db, DM9000_VIDH) << 8;
+ id_val |= (u32)ior(db, DM9000_PIDL) << 16;
+ id_val |= (u32)ior(db, DM9000_PIDH) << 24;
+
+ if (id_val == DM9000_ID)
+ break;
+ printk("%s: read wrong id 0x%08x\n", CARDNAME, id_val);
+ }
+
+ if (id_val != DM9000_ID) {
+ printk("%s: wrong id: 0x%08x\n", CARDNAME, id_val);
+ goto release;
+ }
+
+ /* from this point we assume that we have found a DM9000 */
+
+ /* driver system function */
+ ether_setup(ndev);
+
+ ndev->open = &dm9000_open;
+ ndev->hard_start_xmit = &dm9000_start_xmit;
+ ndev->tx_timeout = &dm9000_timeout;
+ ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
+ ndev->stop = &dm9000_stop;
+ ndev->get_stats = &dm9000_get_stats;
+ ndev->set_multicast_list = &dm9000_hash_table;
+ ndev->do_ioctl = &dm9000_do_ioctl;
+
+#ifdef DM9000_PROGRAM_EEPROM
+ program_eeprom(db);
+#endif
+ db->msg_enable = NETIF_MSG_LINK;
+ db->mii.phy_id_mask = 0x1f;
+ db->mii.reg_num_mask = 0x1f;
+ db->mii.force_media = 0;
+ db->mii.full_duplex = 0;
+ db->mii.dev = ndev;
+ db->mii.mdio_read = dm9000_phy_read;
+ db->mii.mdio_write = dm9000_phy_write;
+
+ /* Read SROM content */
+ for (i = 0; i < 64; i++)
+ ((u16 *) db->srom)[i] = read_srom_word(db, i);
+
+ /* Set Node Address */
+ for (i = 0; i < 6; i++)
+ ndev->dev_addr[i] = db->srom[i];
+
+ if (!is_valid_ether_addr(ndev->dev_addr))
+ printk("%s: Invalid ethernet MAC address. Please "
+ "set using ifconfig\n", ndev->name);
+
+ dev_set_drvdata(dev, ndev);
+ ret = register_netdev(ndev);
+
+ if (ret == 0) {
+ printk("%s: dm9000 at %p,%p IRQ %d MAC: ",
+ ndev->name, db->io_addr, db->io_data, ndev->irq);
+ for (i = 0; i < 5; i++)
+ printk("%02x:", ndev->dev_addr[i]);
+ printk("%02x\n", ndev->dev_addr[5]);
+ }
+ return 0;
+
+ release:
+ out:
+ printk("%s: not found (%d).\n", CARDNAME, ret);
+
+ dm9000_release_board(pdev, db);
+ kfree(ndev);
+
+ return ret;
+}
+
+/*
+ * Open the interface.
+ * The interface is opened whenever "ifconfig" actives it.
+ */
+static int
+dm9000_open(struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+
+ PRINTK2("entering dm9000_open\n");
+
+ if (request_irq(dev->irq, &dm9000_interrupt, SA_SHIRQ, dev->name, dev))
+ return -EAGAIN;
+
+ /* Initialize DM9000 board */
+ dm9000_reset(db);
+ dm9000_init_dm9000(dev);
+
+ /* Init driver variable */
+ db->dbug_cnt = 0;
+
+ /* set and active a timer process */
+ init_timer(&db->timer);
+ db->timer.expires = DM9000_TIMER_WUT * 2;
+ db->timer.data = (unsigned long) dev;
+ db->timer.function = &dm9000_timer;
+ add_timer(&db->timer);
+
+ mii_check_media(&db->mii, netif_msg_link(db), 1);
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/*
+ * Initilize dm9000 board
+ */
+static void
+dm9000_init_dm9000(struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+
+ PRINTK1("entering %s\n",__FUNCTION__);
+
+ /* I/O mode */
+ db->io_mode = ior(db, DM9000_ISR) >> 6; /* ISR bit7:6 keeps I/O mode */
+
+ /* GPIO0 on pre-activate PHY */
+ iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */
+ iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */
+ iow(db, DM9000_GPR, 0); /* Enable PHY */
+
+ /* Program operating register */
+ iow(db, DM9000_TCR, 0); /* TX Polling clear */
+ iow(db, DM9000_BPTR, 0x3f); /* Less 3Kb, 200us */
+ iow(db, DM9000_FCR, 0xff); /* Flow Control */
+ iow(db, DM9000_SMCR, 0); /* Special Mode */
+ /* clear TX status */
+ iow(db, DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END);
+ iow(db, DM9000_ISR, ISR_CLR_STATUS); /* Clear interrupt status */
+
+ /* Set address filter table */
+ dm9000_hash_table(dev);
+
+ /* Activate DM9000 */
+ iow(db, DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN);
+ /* Enable TX/RX interrupt mask */
+ iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM);
+
+ /* Init Driver variable */
+ db->tx_pkt_cnt = 0;
+ db->queue_pkt_len = 0;
+ dev->trans_start = 0;
+ spin_lock_init(&db->lock);
+}
+
+/*
+ * Hardware start transmission.
+ * Send a packet to media from the upper layer.
+ */
+static int
+dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+
+ PRINTK3("dm9000_start_xmit\n");
+
+ if (db->tx_pkt_cnt > 1)
+ return 1;
+
+ netif_stop_queue(dev);
+
+ /* Disable all interrupts */
+ iow(db, DM9000_IMR, IMR_PAR);
+
+ /* Move data to DM9000 TX RAM */
+ writeb(DM9000_MWCMD, db->io_addr);
+
+ (db->outblk)(db->io_data, skb->data, skb->len);
+ db->stats.tx_bytes += skb->len;
+
+ /* TX control: First packet immediately send, second packet queue */
+ if (db->tx_pkt_cnt == 0) {
+
+ /* First Packet */
+ db->tx_pkt_cnt++;
+
+ /* Set TX length to DM9000 */
+ iow(db, DM9000_TXPLL, skb->len & 0xff);
+ iow(db, DM9000_TXPLH, (skb->len >> 8) & 0xff);
+
+ /* Issue TX polling command */
+ iow(db, DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
+
+ dev->trans_start = jiffies; /* save the time stamp */
+
+ } else {
+ /* Second packet */
+ db->tx_pkt_cnt++;
+ db->queue_pkt_len = skb->len;
+ }
+
+ /* free this SKB */
+ dev_kfree_skb(skb);
+
+ /* Re-enable resource check */
+ if (db->tx_pkt_cnt == 1)
+ netif_wake_queue(dev);
+
+ /* Re-enable interrupt */
+ iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM);
+
+ return 0;
+}
+
+static void
+dm9000_shutdown(struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+
+ /* RESET device */
+ dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */
+ iow(db, DM9000_GPR, 0x01); /* Power-Down PHY */
+ iow(db, DM9000_IMR, IMR_PAR); /* Disable all interrupt */
+ iow(db, DM9000_RCR, 0x00); /* Disable RX */
+}
+
+/*
+ * Stop the interface.
+ * The interface is stopped when it is brought.
+ */
+static int
+dm9000_stop(struct net_device *ndev)
+{
+ board_info_t *db = (board_info_t *) ndev->priv;
+
+ PRINTK1("entering %s\n",__FUNCTION__);
+
+ /* deleted timer */
+ del_timer(&db->timer);
+
+ netif_stop_queue(ndev);
+ netif_carrier_off(ndev);
+
+ /* free interrupt */
+ free_irq(ndev->irq, ndev);
+
+ dm9000_shutdown(ndev);
+
+ return 0;
+}
+
+/*
+ * DM9000 interrupt handler
+ * receive the packet to upper layer, free the transmitted packet
+ */
+
+void
+dm9000_tx_done(struct net_device *dev, board_info_t * db)
+{
+ int tx_status = ior(db, DM9000_NSR); /* Got TX status */
+
+ if (tx_status & (NSR_TX2END | NSR_TX1END)) {
+ /* One packet sent complete */
+ db->tx_pkt_cnt--;
+ db->stats.tx_packets++;
+
+ /* Queue packet check & send */
+ if (db->tx_pkt_cnt > 0) {
+ iow(db, DM9000_TXPLL, db->queue_pkt_len & 0xff);
+ iow(db, DM9000_TXPLH, (db->queue_pkt_len >> 8) & 0xff);
+ iow(db, DM9000_TCR, TCR_TXREQ);
+ dev->trans_start = jiffies;
+ }
+ netif_wake_queue(dev);
+ }
+}
+
+static irqreturn_t
+dm9000_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ board_info_t *db;
+ int int_status;
+ u8 reg_save;
+
+ PRINTK3("entering %s\n",__FUNCTION__);
+
+ if (!dev) {
+ PRINTK1("dm9000_interrupt() without DEVICE arg\n");
+ return IRQ_HANDLED;
+ }
+
+ /* A real interrupt coming */
+ db = (board_info_t *) dev->priv;
+ spin_lock(&db->lock);
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
+ /* Disable all interrupts */
+ iow(db, DM9000_IMR, IMR_PAR);
+
+ /* Got DM9000 interrupt status */
+ int_status = ior(db, DM9000_ISR); /* Got ISR */
+ iow(db, DM9000_ISR, int_status); /* Clear ISR status */
+
+ /* Received the coming packet */
+ if (int_status & ISR_PRS)
+ dm9000_rx(dev);
+
+ /* Trnasmit Interrupt check */
+ if (int_status & ISR_PTS)
+ dm9000_tx_done(dev, db);
+
+ /* Re-enable interrupt mask */
+ iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM);
+
+ /* Restore previous register address */
+ writeb(reg_save, db->io_addr);
+
+ spin_unlock(&db->lock);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Get statistics from driver.
+ */
+static struct net_device_stats *
+dm9000_get_stats(struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+ return &db->stats;
+}
+
+/*
+ * Process the upper socket ioctl command
+ */
+static int
+dm9000_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ PRINTK1("entering %s\n",__FUNCTION__);
+ return 0;
+}
+
+/*
+ * A periodic timer routine
+ * Dynamic media sense, allocated Rx buffer...
+ */
+static void
+dm9000_timer(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ board_info_t *db = (board_info_t *) dev->priv;
+ u8 reg_save;
+ unsigned long flags;
+
+ PRINTK3("dm9000_timer()\n");
+
+ spin_lock_irqsave(db->lock,flags);
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
+ mii_check_media(&db->mii, netif_msg_link(db), 0);
+
+ /* Restore previous register address */
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(db->lock,flags);
+
+ /* Set timer again */
+ db->timer.expires = DM9000_TIMER_WUT;
+ add_timer(&db->timer);
+}
+
+struct dm9000_rxhdr {
+ u16 RxStatus;
+ u16 RxLen;
+} __attribute__((__packed__));
+
+/*
+ * Received a packet and pass to upper layer
+ */
+static void
+dm9000_rx(struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+ struct dm9000_rxhdr rxhdr;
+ struct sk_buff *skb;
+ u8 rxbyte, *rdptr;
+ int GoodPacket;
+ int RxLen;
+
+ /* Check packet ready or not */
+ do {
+ ior(db, DM9000_MRCMDX); /* Dummy read */
+
+ /* Get most updated data */
+ rxbyte = readb(db->io_data);
+
+ /* Status check: this byte must be 0 or 1 */
+ if (rxbyte > DM9000_PKT_RDY) {
+ printk("status check failed: %d\n", rxbyte);
+ iow(db, DM9000_RCR, 0x00); /* Stop Device */
+ iow(db, DM9000_ISR, IMR_PAR); /* Stop INT request */
+ return;
+ }
+
+ if (rxbyte != DM9000_PKT_RDY)
+ return;
+
+ /* A packet ready now & Get status/length */
+ GoodPacket = TRUE;
+ writeb(DM9000_MRCMD, db->io_addr);
+
+ (db->inblk)(db->io_data, &rxhdr, sizeof(rxhdr));
+
+ RxLen = rxhdr.RxLen;
+
+ /* Packet Status check */
+ if (RxLen < 0x40) {
+ GoodPacket = FALSE;
+ PRINTK1("Bad Packet received (runt)\n");
+ }
+
+ if (RxLen > DM9000_PKT_MAX) {
+ PRINTK1("RST: RX Len:%x\n", RxLen);
+ }
+
+ if (rxhdr.RxStatus & 0xbf00) {
+ GoodPacket = FALSE;
+ if (rxhdr.RxStatus & 0x100) {
+ PRINTK1("fifo error\n");
+ db->stats.rx_fifo_errors++;
+ }
+ if (rxhdr.RxStatus & 0x200) {
+ PRINTK1("crc error\n");
+ db->stats.rx_crc_errors++;
+ }
+ if (rxhdr.RxStatus & 0x8000) {
+ PRINTK1("length error\n");
+ db->stats.rx_length_errors++;
+ }
+ }
+
+ /* Move data from DM9000 */
+ if (GoodPacket
+ && ((skb = dev_alloc_skb(RxLen + 4)) != NULL)) {
+ skb->dev = dev;
+ skb_reserve(skb, 2);
+ rdptr = (u8 *) skb_put(skb, RxLen - 4);
+
+ /* Read received packet from RX SRAM */
+
+ (db->inblk)(db->io_data, rdptr, RxLen);
+ db->stats.rx_bytes += RxLen;
+
+ /* Pass to upper layer */
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ db->stats.rx_packets++;
+
+ } else {
+ /* need to dump the packet's data */
+
+ (db->dumpblk)(db->io_data, RxLen);
+ }
+ } while (rxbyte == DM9000_PKT_RDY);
+}
+
+/*
+ * Read a word data from SROM
+ */
+static u16
+read_srom_word(board_info_t * db, int offset)
+{
+ iow(db, DM9000_EPAR, offset);
+ iow(db, DM9000_EPCR, EPCR_ERPRR);
+ mdelay(8); /* according to the datasheet 200us should be enough,
+ but it doesn't work */
+ iow(db, DM9000_EPCR, 0x0);
+ return (ior(db, DM9000_EPDRL) + (ior(db, DM9000_EPDRH) << 8));
+}
+
+#ifdef DM9000_PROGRAM_EEPROM
+/*
+ * Write a word data to SROM
+ */
+static void
+write_srom_word(board_info_t * db, int offset, u16 val)
+{
+ iow(db, DM9000_EPAR, offset);
+ iow(db, DM9000_EPDRH, ((val >> 8) & 0xff));
+ iow(db, DM9000_EPDRL, (val & 0xff));
+ iow(db, DM9000_EPCR, EPCR_WEP | EPCR_ERPRW);
+ mdelay(8); /* same shit */
+ iow(db, DM9000_EPCR, 0);
+}
+
+/*
+ * Only for development:
+ * Here we write static data to the eeprom in case
+ * we don't have valid content on a new board
+ */
+static void
+program_eeprom(board_info_t * db)
+{
+ u16 eeprom[] = { 0x0c00, 0x007f, 0x1300, /* MAC Address */
+ 0x0000, /* Autoload: accept nothing */
+ 0x0a46, 0x9000, /* Vendor / Product ID */
+ 0x0000, /* pin control */
+ 0x0000,
+ }; /* Wake-up mode control */
+ int i;
+ for (i = 0; i < 8; i++)
+ write_srom_word(db, i, eeprom[i]);
+}
+#endif
+
+
+/*
+ * Calculate the CRC valude of the Rx packet
+ * flag = 1 : return the reverse CRC (for the received packet CRC)
+ * 0 : return the normal CRC (for Hash Table index)
+ */
+
+static unsigned long
+cal_CRC(unsigned char *Data, unsigned int Len, u8 flag)
+{
+
+ u32 crc = ether_crc_le(Len, Data);
+
+ if (flag)
+ return ~crc;
+
+ return crc;
+}
+
+/*
+ * Set DM9000 multicast address
+ */
+static void
+dm9000_hash_table(struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+ struct dev_mc_list *mcptr = dev->mc_list;
+ int mc_cnt = dev->mc_count;
+ u32 hash_val;
+ u16 i, oft, hash_table[4];
+ unsigned long flags;
+
+ PRINTK2("dm9000_hash_table()\n");
+
+ spin_lock_irqsave(&db->lock,flags);
+
+ for (i = 0, oft = 0x10; i < 6; i++, oft++)
+ iow(db, oft, dev->dev_addr[i]);
+
+ /* Clear Hash Table */
+ for (i = 0; i < 4; i++)
+ hash_table[i] = 0x0;
+
+ /* broadcast address */
+ hash_table[3] = 0x8000;
+
+ /* the multicast address in Hash Table : 64 bits */
+ for (i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+ hash_val = cal_CRC((char *) mcptr->dmi_addr, 6, 0) & 0x3f;
+ hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
+ }
+
+ /* Write the hash table to MAC MD table */
+ for (i = 0, oft = 0x16; i < 4; i++) {
+ iow(db, oft++, hash_table[i] & 0xff);
+ iow(db, oft++, (hash_table[i] >> 8) & 0xff);
+ }
+
+ spin_unlock_irqrestore(&db->lock,flags);
+}
+
+
+/*
+ * Read a word from phyxcer
+ */
+static int
+dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&db->lock,flags);
+ /* Fill the phyxcer register into REG_0C */
+ iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+ iow(db, DM9000_EPCR, 0xc); /* Issue phyxcer read command */
+ udelay(100); /* Wait read complete */
+ iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */
+
+ /* The read data keeps on REG_0D & REG_0E */
+ ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
+
+ spin_unlock_irqrestore(&db->lock,flags);
+
+ return ret;
+}
+
+/*
+ * Write a word to phyxcer
+ */
+static void
+dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&db->lock,flags);
+
+ /* Fill the phyxcer register into REG_0C */
+ iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+ /* Fill the written data into REG_0D & REG_0E */
+ iow(db, DM9000_EPDRL, (value & 0xff));
+ iow(db, DM9000_EPDRH, ((value >> 8) & 0xff));
+
+ iow(db, DM9000_EPCR, 0xa); /* Issue phyxcer write command */
+ udelay(500); /* Wait write complete */
+ iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */
+
+ spin_unlock_irqrestore(&db->lock,flags);
+}
+
+static int
+dm9000_drv_suspend(struct device *dev, u32 state, u32 level)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+
+ if (ndev && level == SUSPEND_DISABLE) {
+ if (netif_running(ndev)) {
+ netif_device_detach(ndev);
+ dm9000_shutdown(ndev);
+ }
+ }
+ return 0;
+}
+
+static int
+dm9000_drv_resume(struct device *dev, u32 level)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ board_info_t *db = (board_info_t *) ndev->priv;
+
+ if (ndev && level == RESUME_ENABLE) {
+
+ if (netif_running(ndev)) {
+ dm9000_reset(db);
+ dm9000_init_dm9000(ndev);
+
+ netif_device_attach(ndev);
+ }
+ }
+ return 0;
+}
+
+static int
+dm9000_drv_remove(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct net_device *ndev = dev_get_drvdata(dev);
+
+ dev_set_drvdata(dev, NULL);
+
+ unregister_netdev(ndev);
+ dm9000_release_board(pdev, (board_info_t *) ndev->priv);
+ kfree(ndev); /* free device structure */
+
+ PRINTK1("clean_module() exit\n");
+
+ return 0;
+}
+
+static struct device_driver dm9000_driver = {
+ .name = "dm9000",
+ .bus = &platform_bus_type,
+ .probe = dm9000_probe,
+ .remove = dm9000_drv_remove,
+ .suspend = dm9000_drv_suspend,
+ .resume = dm9000_drv_resume,
+};
+
+static int __init
+dm9000_init(void)
+{
+ return driver_register(&dm9000_driver); /* search board and register */
+}
+
+static void __exit
+dm9000_cleanup(void)
+{
+ driver_unregister(&dm9000_driver);
+}
+
+module_init(dm9000_init);
+module_exit(dm9000_cleanup);
+
+MODULE_AUTHOR("Sascha Hauer, Ben Dooks");
+MODULE_DESCRIPTION("Davicom DM9000 network driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dm9000.h b/drivers/net/dm9000.h
new file mode 100644
index 00000000000..82cad360baf
--- /dev/null
+++ b/drivers/net/dm9000.h
@@ -0,0 +1,135 @@
+/*
+ * dm9000 Ethernet
+ */
+
+#ifndef _DM9000X_H_
+#define _DM9000X_H_
+
+#define DM9000_ID 0x90000A46
+
+/* although the registers are 16 bit, they are 32-bit aligned.
+ */
+
+#define DM9000_NCR 0x00
+#define DM9000_NSR 0x01
+#define DM9000_TCR 0x02
+#define DM9000_TSR1 0x03
+#define DM9000_TSR2 0x04
+#define DM9000_RCR 0x05
+#define DM9000_RSR 0x06
+#define DM9000_ROCR 0x07
+#define DM9000_BPTR 0x08
+#define DM9000_FCTR 0x09
+#define DM9000_FCR 0x0A
+#define DM9000_EPCR 0x0B
+#define DM9000_EPAR 0x0C
+#define DM9000_EPDRL 0x0D
+#define DM9000_EPDRH 0x0E
+#define DM9000_WCR 0x0F
+
+#define DM9000_PAR 0x10
+#define DM9000_MAR 0x16
+
+#define DM9000_GPCR 0x1e
+#define DM9000_GPR 0x1f
+#define DM9000_TRPAL 0x22
+#define DM9000_TRPAH 0x23
+#define DM9000_RWPAL 0x24
+#define DM9000_RWPAH 0x25
+
+#define DM9000_VIDL 0x28
+#define DM9000_VIDH 0x29
+#define DM9000_PIDL 0x2A
+#define DM9000_PIDH 0x2B
+
+#define DM9000_CHIPR 0x2C
+#define DM9000_SMCR 0x2F
+
+#define DM9000_MRCMDX 0xF0
+#define DM9000_MRCMD 0xF2
+#define DM9000_MRRL 0xF4
+#define DM9000_MRRH 0xF5
+#define DM9000_MWCMDX 0xF6
+#define DM9000_MWCMD 0xF8
+#define DM9000_MWRL 0xFA
+#define DM9000_MWRH 0xFB
+#define DM9000_TXPLL 0xFC
+#define DM9000_TXPLH 0xFD
+#define DM9000_ISR 0xFE
+#define DM9000_IMR 0xFF
+
+#define NCR_EXT_PHY (1<<7)
+#define NCR_WAKEEN (1<<6)
+#define NCR_FCOL (1<<4)
+#define NCR_FDX (1<<3)
+#define NCR_LBK (3<<1)
+#define NCR_RST (1<<0)
+
+#define NSR_SPEED (1<<7)
+#define NSR_LINKST (1<<6)
+#define NSR_WAKEST (1<<5)
+#define NSR_TX2END (1<<3)
+#define NSR_TX1END (1<<2)
+#define NSR_RXOV (1<<1)
+
+#define TCR_TJDIS (1<<6)
+#define TCR_EXCECM (1<<5)
+#define TCR_PAD_DIS2 (1<<4)
+#define TCR_CRC_DIS2 (1<<3)
+#define TCR_PAD_DIS1 (1<<2)
+#define TCR_CRC_DIS1 (1<<1)
+#define TCR_TXREQ (1<<0)
+
+#define TSR_TJTO (1<<7)
+#define TSR_LC (1<<6)
+#define TSR_NC (1<<5)
+#define TSR_LCOL (1<<4)
+#define TSR_COL (1<<3)
+#define TSR_EC (1<<2)
+
+#define RCR_WTDIS (1<<6)
+#define RCR_DIS_LONG (1<<5)
+#define RCR_DIS_CRC (1<<4)
+#define RCR_ALL (1<<3)
+#define RCR_RUNT (1<<2)
+#define RCR_PRMSC (1<<1)
+#define RCR_RXEN (1<<0)
+
+#define RSR_RF (1<<7)
+#define RSR_MF (1<<6)
+#define RSR_LCS (1<<5)
+#define RSR_RWTO (1<<4)
+#define RSR_PLE (1<<3)
+#define RSR_AE (1<<2)
+#define RSR_CE (1<<1)
+#define RSR_FOE (1<<0)
+
+#define FCTR_HWOT(ot) (( ot & 0xf ) << 4 )
+#define FCTR_LWOT(ot) ( ot & 0xf )
+
+#define IMR_PAR (1<<7)
+#define IMR_ROOM (1<<3)
+#define IMR_ROM (1<<2)
+#define IMR_PTM (1<<1)
+#define IMR_PRM (1<<0)
+
+#define ISR_ROOS (1<<3)
+#define ISR_ROS (1<<2)
+#define ISR_PTS (1<<1)
+#define ISR_PRS (1<<0)
+#define ISR_CLR_STATUS (ISR_ROOS | ISR_ROS | ISR_PTS | ISR_PRS)
+
+#define EPCR_REEP (1<<5)
+#define EPCR_WEP (1<<4)
+#define EPCR_EPOS (1<<3)
+#define EPCR_ERPRR (1<<2)
+#define EPCR_ERPRW (1<<1)
+#define EPCR_ERRE (1<<0)
+
+#define GPCR_GEP_CNTL (1<<0)
+
+#define DM9000_PKT_RDY 0x01 /* Packet ready to receive */
+#define DM9000_PKT_MAX 1536 /* Received packet max size */
+
+#endif /* _DM9000X_H_ */
+
diff --git a/drivers/net/fmv18x.c b/drivers/net/fmv18x.c
deleted file mode 100644
index 04c74852347..00000000000
--- a/drivers/net/fmv18x.c
+++ /dev/null
@@ -1,689 +0,0 @@
-/* fmv18x.c: A network device driver for the Fujitsu FMV-181/182/183/184.
-
- Original: at1700.c (1993-94 by Donald Becker).
- Copyright 1993 United States Government as represented by the
- Director, National Security Agency.
- The author may be reached as becker@scyld.com, or C/O
- Scyld Computing Corporation
- 410 Severn Ave., Suite 210
- Annapolis MD 21403
-
- Modified by Yutaka TAMIYA (tamy@flab.fujitsu.co.jp)
- Copyright 1994 Fujitsu Laboratories Ltd.
- Special thanks to:
- Masayoshi UTAKA (utaka@ace.yk.fujitsu.co.jp)
- for testing this driver.
- H. NEGISHI (agy, negishi@sun45.psd.cs.fujitsu.co.jp)
- for suggestion of some program modification.
- Masahiro SEKIGUCHI <seki@sysrap.cs.fujitsu.co.jp>
- for suggestion of some program modification.
- Kazutoshi MORIOKA (morioka@aurora.oaks.cs.fujitsu.co.jp)
- for testing this driver.
-
- This software may be used and distributed according to the terms
- of the GNU General Public License, incorporated herein by reference.
-
- This is a device driver for the Fujitsu FMV-181/182/183/184, which
- is a straight-forward Fujitsu MB86965 implementation.
-
- Sources:
- at1700.c
- The Fujitsu MB86965 datasheet.
- The Fujitsu FMV-181/182 user's guide
-*/
-
-static const char version[] =
- "fmv18x.c:v2.2.0 09/24/98 Yutaka TAMIYA (tamy@flab.fujitsu.co.jp)\n";
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/spinlock.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-
-#define DRV_NAME "fmv18x"
-
-static unsigned fmv18x_probe_list[] __initdata = {
- 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x300, 0x340, 0
-};
-
-/* use 0 for production, 1 for verification, >2 for debug */
-#ifndef NET_DEBUG
-#define NET_DEBUG 1
-#endif
-static unsigned int net_debug = NET_DEBUG;
-
-typedef unsigned char uchar;
-
-/* Information that need to be kept for each board. */
-struct net_local {
- struct net_device_stats stats;
- long open_time; /* Useless example local info. */
- uint tx_started:1; /* Number of packet on the Tx queue. */
- uint tx_queue_ready:1; /* Tx queue is ready to be sent. */
- uint rx_started:1; /* Packets are Rxing. */
- uchar tx_queue; /* Number of packet on the Tx queue. */
- ushort tx_queue_len; /* Current length of the Tx queue. */
- spinlock_t lock;
-};
-
-
-/* Offsets from the base address. */
-#define STATUS 0
-#define TX_STATUS 0
-#define RX_STATUS 1
-#define TX_INTR 2 /* Bit-mapped interrupt enable registers. */
-#define RX_INTR 3
-#define TX_MODE 4
-#define RX_MODE 5
-#define CONFIG_0 6 /* Misc. configuration settings. */
-#define CONFIG_1 7
-/* Run-time register bank 2 definitions. */
-#define DATAPORT 8 /* Word-wide DMA or programmed-I/O dataport. */
-#define TX_START 10
-#define COL16CNTL 11 /* Controll Reg for 16 collisions */
-#define MODE13 13
-/* Fujitsu FMV-18x Card Configuration */
-#define FJ_STATUS0 0x10
-#define FJ_STATUS1 0x11
-#define FJ_CONFIG0 0x12
-#define FJ_CONFIG1 0x13
-#define FJ_MACADDR 0x14 /* 0x14 - 0x19 */
-#define FJ_BUFCNTL 0x1A
-#define FJ_BUFDATA 0x1C
-#define FMV18X_IO_EXTENT 32
-
-/* Index to functions, as function prototypes. */
-
-static int fmv18x_probe1(struct net_device *dev, short ioaddr);
-static int net_open(struct net_device *dev);
-static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-static void net_rx(struct net_device *dev);
-static void net_timeout(struct net_device *dev);
-static int net_close(struct net_device *dev);
-static struct net_device_stats *net_get_stats(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-
-
-/* Check for a network adaptor of this type, and return '0' iff one exists.
- If dev->base_addr == 0, probe all likely locations.
- If dev->base_addr == 1, always return failure.
- If dev->base_addr == 2, allocate space for the device and return success
- (detachable devices only).
- */
-
-static int io = 0x220;
-static int irq;
-
-struct net_device * __init fmv18x_probe(int unit)
-{
- struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
- unsigned *port;
- int err = 0;
-
- if (!dev)
- return ERR_PTR(-ENODEV);
-
- if (unit >= 0) {
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
- io = dev->base_addr;
- irq = dev->irq;
- }
-
- SET_MODULE_OWNER(dev);
-
- if (io > 0x1ff) { /* Check a single specified location. */
- err = fmv18x_probe1(dev, io);
- } else if (io != 0) { /* Don't probe at all. */
- err = -ENXIO;
- } else {
- for (port = fmv18x_probe_list; *port; port++)
- if (fmv18x_probe1(dev, *port) == 0)
- break;
- if (!*port)
- err = -ENODEV;
- }
- if (err)
- goto out;
- err = register_netdev(dev);
- if (err)
- goto out1;
- return dev;
-out1:
- free_irq(dev->irq, dev);
- release_region(dev->base_addr, FMV18X_IO_EXTENT);
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-
-/* The Fujitsu datasheet suggests that the NIC be probed for by checking its
- "signature", the default bit pattern after a reset. This *doesn't* work --
- there is no way to reset the bus interface without a complete power-cycle!
-
- It turns out that ATI came to the same conclusion I did: the only thing
- that can be done is checking a few bits and then diving right into MAC
- address check. */
-
-static int __init fmv18x_probe1(struct net_device *dev, short ioaddr)
-{
- char irqmap[4] = {3, 7, 10, 15};
- char irqmap_pnp[8] = {3, 4, 5, 7, 9, 10, 11, 15};
- unsigned int i, retval;
- struct net_local *lp;
-
- /* Resetting the chip doesn't reset the ISA interface, so don't bother.
- That means we have to be careful with the register values we probe for.
- */
-
- if (!request_region(ioaddr, FMV18X_IO_EXTENT, DRV_NAME))
- return -EBUSY;
-
- dev->irq = irq;
- dev->base_addr = ioaddr;
-
- /* Check I/O address configuration and Fujitsu vendor code */
- if (inb(ioaddr+FJ_MACADDR ) != 0x00
- || inb(ioaddr+FJ_MACADDR+1) != 0x00
- || inb(ioaddr+FJ_MACADDR+2) != 0x0e) {
- retval = -ENODEV;
- goto out;
- }
-
- /* Check PnP mode for FMV-183/184/183A/184A. */
- /* This PnP routine is very poor. IO and IRQ should be known. */
- if (inb(ioaddr + FJ_STATUS1) & 0x20) {
- for (i = 0; i < 8; i++) {
- if (dev->irq == irqmap_pnp[i])
- break;
- }
- if (i == 8) {
- retval = -ENODEV;
- goto out;
- }
- } else {
- if (fmv18x_probe_list[inb(ioaddr + FJ_CONFIG0) & 0x07] != ioaddr)
- return -ENODEV;
- dev->irq = irqmap[(inb(ioaddr + FJ_CONFIG0)>>6) & 0x03];
- }
-
- /* Snarf the interrupt vector now. */
- retval = request_irq(dev->irq, &net_interrupt, 0, DRV_NAME, dev);
- if (retval) {
- printk ("FMV-18x found at %#3x, but it's unusable due to a conflict on"
- "IRQ %d.\n", ioaddr, dev->irq);
- goto out;
- }
-
- printk("%s: FMV-18x found at %#3x, IRQ %d, address ", dev->name,
- ioaddr, dev->irq);
-
- for(i = 0; i < 6; i++) {
- unsigned char val = inb(ioaddr + FJ_MACADDR + i);
- printk("%02x", val);
- dev->dev_addr[i] = val;
- }
-
- /* "FJ_STATUS0" 12 bit 0x0400 means use regular 100 ohm 10baseT signals,
- rather than 150 ohm shielded twisted pair compensation.
- 0x0000 == auto-sense the interface
- 0x0800 == use TP interface
- 0x1800 == use coax interface
- */
- {
- const char *porttype[] = {"auto-sense", "10baseT", "auto-sense", "10base2/5"};
- ushort setup_value = inb(ioaddr + FJ_STATUS0);
-
- switch( setup_value & 0x07 ){
- case 0x01 /* 10base5 */:
- case 0x02 /* 10base2 */: dev->if_port = 0x18; break;
- case 0x04 /* 10baseT */: dev->if_port = 0x08; break;
- default /* auto-sense*/: dev->if_port = 0x00; break;
- }
- printk(" %s interface.\n", porttype[(dev->if_port>>3) & 3]);
- }
-
- /* Initialize LAN Controller and LAN Card */
- outb(0xda, ioaddr + CONFIG_0); /* Initialize LAN Controller */
- outb(0x00, ioaddr + CONFIG_1); /* Stand by mode */
- outb(0x00, ioaddr + FJ_CONFIG1); /* Disable IRQ of LAN Card */
- outb(0x00, ioaddr + FJ_BUFCNTL); /* Reset ? I'm not sure (TAMIYA) */
-
- /* wait for a while */
- udelay(200);
-
- /* Set the station address in bank zero. */
- outb(0x00, ioaddr + CONFIG_1);
- for (i = 0; i < 6; i++)
- outb(dev->dev_addr[i], ioaddr + 8 + i);
-
- /* Switch to bank 1 and set the multicast table to accept none. */
- outb(0x04, ioaddr + CONFIG_1);
- for (i = 0; i < 8; i++)
- outb(0x00, ioaddr + 8 + i);
-
- /* Switch to bank 2 and lock our I/O address. */
- outb(0x08, ioaddr + CONFIG_1);
- outb(dev->if_port, ioaddr + MODE13);
- outb(0x00, ioaddr + COL16CNTL);
-
- if (net_debug)
- printk(version);
-
- /* Initialize the device structure. */
- dev->priv = kmalloc(sizeof(struct net_local), GFP_KERNEL);
- if (!dev->priv) {
- retval = -ENOMEM;
- goto out_irq;
- }
- memset(dev->priv, 0, sizeof(struct net_local));
- lp = dev->priv;
- spin_lock_init(&lp->lock);
-
- dev->open = net_open;
- dev->stop = net_close;
- dev->hard_start_xmit = net_send_packet;
- dev->tx_timeout = net_timeout;
- dev->watchdog_timeo = HZ/10;
- dev->get_stats = net_get_stats;
- dev->set_multicast_list = set_multicast_list;
- return 0;
-
-out_irq:
- free_irq(dev->irq, dev);
-out:
- release_region(ioaddr, FMV18X_IO_EXTENT);
- return retval;
-}
-
-
-static int net_open(struct net_device *dev)
-{
- struct net_local *lp = dev->priv;
- int ioaddr = dev->base_addr;
-
- /* Set the configuration register 0 to 32K 100ns. byte-wide memory,
- 16 bit bus access, and two 4K Tx, enable the Rx and Tx. */
- outb(0x5a, ioaddr + CONFIG_0);
-
- /* Powerup and switch to register bank 2 for the run-time registers. */
- outb(0xe8, ioaddr + CONFIG_1);
-
- lp->tx_started = 0;
- lp->tx_queue_ready = 1;
- lp->rx_started = 0;
- lp->tx_queue = 0;
- lp->tx_queue_len = 0;
-
- /* Clear Tx and Rx Status */
- outb(0xff, ioaddr + TX_STATUS);
- outb(0xff, ioaddr + RX_STATUS);
- lp->open_time = jiffies;
-
- netif_start_queue(dev);
-
- /* Enable the IRQ of the LAN Card */
- outb(0x80, ioaddr + FJ_CONFIG1);
-
- /* Enable both Tx and Rx interrupts */
- outw(0x8182, ioaddr+TX_INTR);
-
- return 0;
-}
-
-static void net_timeout(struct net_device *dev)
-{
- struct net_local *lp = dev->priv;
- int ioaddr = dev->base_addr;
- unsigned long flags;
-
-
- printk(KERN_WARNING "%s: transmit timed out with status %04x, %s?\n", dev->name,
- htons(inw(ioaddr + TX_STATUS)),
- inb(ioaddr + TX_STATUS) & 0x80
- ? "IRQ conflict" : "network cable problem");
- printk(KERN_WARNING "%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n",
- dev->name, htons(inw(ioaddr + 0)),
- htons(inw(ioaddr + 2)), htons(inw(ioaddr + 4)),
- htons(inw(ioaddr + 6)), htons(inw(ioaddr + 8)),
- htons(inw(ioaddr +10)), htons(inw(ioaddr +12)),
- htons(inw(ioaddr +14)));
- printk(KERN_WARNING "eth card: %04x %04x\n",
- htons(inw(ioaddr+FJ_STATUS0)),
- htons(inw(ioaddr+FJ_CONFIG0)));
- lp->stats.tx_errors++;
- /* ToDo: We should try to restart the adaptor... */
- spin_lock_irqsave(&lp->lock, flags);
-
- /* Initialize LAN Controller and LAN Card */
- outb(0xda, ioaddr + CONFIG_0); /* Initialize LAN Controller */
- outb(0x00, ioaddr + CONFIG_1); /* Stand by mode */
- outb(0x00, ioaddr + FJ_CONFIG1); /* Disable IRQ of LAN Card */
- outb(0x00, ioaddr + FJ_BUFCNTL); /* Reset ? I'm not sure */
- net_open(dev);
- spin_unlock_irqrestore(&lp->lock, flags);
-
- netif_wake_queue(dev);
-}
-
-static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
-{
- struct net_local *lp = dev->priv;
- int ioaddr = dev->base_addr;
- short length = skb->len;
- unsigned char *buf;
- unsigned long flags;
-
- /* Block a transmit from overlapping. */
-
- if (length > ETH_FRAME_LEN) {
- if (net_debug)
- printk("%s: Attempting to send a large packet (%d bytes).\n",
- dev->name, length);
- return 1;
- }
-
- if (length < ETH_ZLEN) {
- skb = skb_padto(skb, ETH_ZLEN);
- if (skb == NULL)
- return 0;
- length = ETH_ZLEN;
- }
- buf = skb->data;
-
- if (net_debug > 4)
- printk("%s: Transmitting a packet of length %lu.\n", dev->name,
- (unsigned long)skb->len);
- /* We may not start transmitting unless we finish transferring
- a packet into the Tx queue. During executing the following
- codes we possibly catch a Tx interrupt. Thus we flag off
- tx_queue_ready, so that we prevent the interrupt routine
- (net_interrupt) to start transmitting. */
- spin_lock_irqsave(&lp->lock, flags);
- lp->tx_queue_ready = 0;
- {
- outw(length, ioaddr + DATAPORT);
- outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
- lp->tx_queue++;
- lp->tx_queue_len += length + 2;
- }
- lp->tx_queue_ready = 1;
- spin_unlock_irqrestore(&lp->lock, flags);
-
- if (lp->tx_started == 0) {
- /* If the Tx is idle, always trigger a transmit. */
- outb(0x80 | lp->tx_queue, ioaddr + TX_START);
- lp->tx_queue = 0;
- lp->tx_queue_len = 0;
- dev->trans_start = jiffies;
- lp->tx_started = 1;
- } else if (lp->tx_queue_len >= 4096 - 1502) /* No room for a packet */
- netif_stop_queue(dev);
-
- dev_kfree_skb(skb);
- return 0;
-}
-
-/* The typical workload of the driver:
- Handle the network interface interrupts. */
-static irqreturn_t
-net_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- struct net_device *dev = dev_id;
- struct net_local *lp;
- int ioaddr, status;
-
- ioaddr = dev->base_addr;
- lp = dev->priv;
- status = inw(ioaddr + TX_STATUS);
- outw(status, ioaddr + TX_STATUS);
-
- if (net_debug > 4)
- printk("%s: Interrupt with status %04x.\n", dev->name, status);
- if (lp->rx_started == 0 &&
- (status & 0xff00 || (inb(ioaddr + RX_MODE) & 0x40) == 0)) {
- /* Got a packet(s).
- We cannot execute net_rx more than once at the same time for
- the same device. During executing net_rx, we possibly catch a
- Tx interrupt. Thus we flag on rx_started, so that we prevent
- the interrupt routine (net_interrupt) to dive into net_rx
- again. */
- lp->rx_started = 1;
- outb(0x00, ioaddr + RX_INTR); /* Disable RX intr. */
- net_rx(dev);
- outb(0x81, ioaddr + RX_INTR); /* Enable RX intr. */
- lp->rx_started = 0;
- }
- if (status & 0x00ff) {
- if (status & 0x02) {
- /* More than 16 collisions occurred */
- if (net_debug > 4)
- printk("%s: 16 Collision occur during Txing.\n", dev->name);
- /* Cancel sending a packet. */
- outb(0x03, ioaddr + COL16CNTL);
- lp->stats.collisions++;
- }
- if (status & 0x82) {
- spin_lock(&lp->lock);
- lp->stats.tx_packets++;
- if (lp->tx_queue && lp->tx_queue_ready) {
- outb(0x80 | lp->tx_queue, ioaddr + TX_START);
- lp->tx_queue = 0;
- lp->tx_queue_len = 0;
- dev->trans_start = jiffies;
- netif_wake_queue(dev); /* Inform upper layers. */
- } else {
- lp->tx_started = 0;
- netif_wake_queue(dev); /* Inform upper layers. */
- }
- spin_unlock(&lp->lock);
- }
- }
- return IRQ_RETVAL(status);
-}
-
-/* We have a good packet(s), get it/them out of the buffers. */
-static void net_rx(struct net_device *dev)
-{
- struct net_local *lp = dev->priv;
- int ioaddr = dev->base_addr;
- int boguscount = 5;
-
- while ((inb(ioaddr + RX_MODE) & 0x40) == 0) {
- /* Clear PKT_RDY bit: by agy 19940922 */
- /* outb(0x80, ioaddr + RX_STATUS); */
- ushort status = inw(ioaddr + DATAPORT);
-
- if (net_debug > 4)
- printk("%s: Rxing packet mode %02x status %04x.\n",
- dev->name, inb(ioaddr + RX_MODE), status);
-#ifndef final_version
- if (status == 0) {
- outb(0x05, ioaddr + 14);
- break;
- }
-#endif
-
- if ((status & 0xF0) != 0x20) { /* There was an error. */
- lp->stats.rx_errors++;
- if (status & 0x08) lp->stats.rx_length_errors++;
- if (status & 0x04) lp->stats.rx_frame_errors++;
- if (status & 0x02) lp->stats.rx_crc_errors++;
- if (status & 0x01) lp->stats.rx_over_errors++;
- } else {
- ushort pkt_len = inw(ioaddr + DATAPORT);
- /* Malloc up new buffer. */
- struct sk_buff *skb;
-
- if (pkt_len > 1550) {
- printk("%s: The FMV-18x claimed a very large packet, size %d.\n",
- dev->name, pkt_len);
- outb(0x05, ioaddr + 14);
- lp->stats.rx_errors++;
- break;
- }
- skb = dev_alloc_skb(pkt_len+3);
- if (skb == NULL) {
- printk("%s: Memory squeeze, dropping packet (len %d).\n",
- dev->name, pkt_len);
- outb(0x05, ioaddr + 14);
- lp->stats.rx_dropped++;
- break;
- }
- skb->dev = dev;
- skb_reserve(skb,2);
-
- insw(ioaddr + DATAPORT, skb_put(skb,pkt_len), (pkt_len + 1) >> 1);
-
- if (net_debug > 5) {
- int i;
- printk("%s: Rxed packet of length %d: ", dev->name, pkt_len);
- for (i = 0; i < 14; i++)
- printk(" %02x", skb->data[i]);
- printk(".\n");
- }
-
- skb->protocol=eth_type_trans(skb, dev);
- netif_rx(skb);
- dev->last_rx = jiffies;
- lp->stats.rx_packets++;
- lp->stats.rx_bytes += pkt_len;
- }
- if (--boguscount <= 0)
- break;
- }
-
- /* If any worth-while packets have been received, dev_rint()
- has done a mark_bh(NET_BH) for us and will work on them
- when we get to the bottom-half routine. */
- {
- int i;
- for (i = 0; i < 20; i++) {
- if ((inb(ioaddr + RX_MODE) & 0x40) == 0x40)
- break;
- (void)inw(ioaddr + DATAPORT); /* dummy status read */
- outb(0x05, ioaddr + 14);
- }
-
- if (net_debug > 5 && i > 0)
- printk("%s: Exint Rx packet with mode %02x after %d ticks.\n",
- dev->name, inb(ioaddr + RX_MODE), i);
- }
-
- return;
-}
-
-/* The inverse routine to net_open(). */
-static int net_close(struct net_device *dev)
-{
- int ioaddr = dev->base_addr;
-
- ((struct net_local *)dev->priv)->open_time = 0;
-
- netif_stop_queue(dev);
-
- /* Set configuration register 0 to disable Tx and Rx. */
- outb(0xda, ioaddr + CONFIG_0);
-
- /* Update the statistics -- ToDo. */
-
- /* Power-down the chip. Green, green, green! */
- outb(0x00, ioaddr + CONFIG_1);
-
- /* Set the ethernet adaptor disable IRQ */
- outb(0x00, ioaddr + FJ_CONFIG1);
-
- return 0;
-}
-
-/* Get the current statistics. This may be called with the card open or
- closed. */
-static struct net_device_stats *net_get_stats(struct net_device *dev)
-{
- struct net_local *lp = dev->priv;
- return &lp->stats;
-}
-
-/* Set or clear the multicast filter for this adaptor.
- num_addrs == -1 Promiscuous mode, receive all packets
- num_addrs == 0 Normal mode, clear multicast list
- num_addrs > 0 Multicast mode, receive normal and MC packets, and do
- best-effort filtering.
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
- short ioaddr = dev->base_addr;
- if (dev->mc_count || dev->flags&(IFF_PROMISC|IFF_ALLMULTI))
- {
- /*
- * We must make the kernel realise we had to move
- * into promisc mode or we start all out war on
- * the cable. - AC
- */
- dev->flags|=IFF_PROMISC;
-
- outb(3, ioaddr + RX_MODE); /* Enable promiscuous mode */
- }
- else
- outb(2, ioaddr + RX_MODE); /* Disable promiscuous, use normal mode */
-}
-
-#ifdef MODULE
-static struct net_device *dev_fmv18x;
-
-MODULE_PARM(io, "i");
-MODULE_PARM(irq, "i");
-MODULE_PARM(net_debug, "i");
-MODULE_PARM_DESC(io, "FMV-18X I/O address");
-MODULE_PARM_DESC(irq, "FMV-18X IRQ number");
-MODULE_PARM_DESC(net_debug, "FMV-18X debug level (0-1,5-6)");
-MODULE_LICENSE("GPL");
-
-int init_module(void)
-{
- if (io == 0)
- printk("fmv18x: You should not use auto-probing with insmod!\n");
- dev_fmv18x = fmv18x_probe(-1);
- if (IS_ERR(dev_fmv18x))
- return PTR_ERR(dev_fmv18x);
- return 0;
-}
-
-void
-cleanup_module(void)
-{
- unregister_netdev(dev_fmv18x);
- free_irq(dev_fmv18x->irq, dev_fmv18x);
- release_region(dev_fmv18x->base_addr, FMV18X_IO_EXTENT);
- free_netdev(dev_fmv18x);
-}
-#endif /* MODULE */
-
-/*
- * Local variables:
- * compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -m486 -c fmv18x.c"
- * version-control: t
- * kept-new-versions: 5
- * tab-width: 4
- * c-indent-level: 4
- * End:
- */
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index b0126304ca0..181b6ed5500 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1537,20 +1537,20 @@ static void shmem_get_8390_hdr(struct net_device *dev,
static void shmem_block_input(struct net_device *dev, int count,
struct sk_buff *skb, int ring_offset)
{
- void __iomem *xfer_start = ei_status.mem + (TX_PAGES<<8)
- + ring_offset
+ void __iomem *base = ei_status.mem;
+ unsigned long offset = (TX_PAGES<<8) + ring_offset
- (ei_status.rx_start_page << 8);
char *buf = skb->data;
- if (xfer_start + count > (void __iomem *)ei_status.rmem_end) {
+ if (offset + count > ei_status.priv) {
/* We must wrap the input move. */
- int semi_count = (void __iomem *)ei_status.rmem_end - xfer_start;
- copyin(buf, xfer_start, semi_count);
+ int semi_count = ei_status.priv - offset;
+ copyin(buf, base + offset, semi_count);
buf += semi_count;
- xfer_start = ei_status.mem + (TX_PAGES<<8);
+ offset = TX_PAGES<<8;
count -= semi_count;
}
- copyin(buf, xfer_start, count);
+ copyin(buf, base + offset, count);
}
/*====================================================================*/
@@ -1611,8 +1611,9 @@ static int setup_shmem_window(dev_link_t *link, int start_pg,
}
ei_status.mem = info->base + offset;
+ ei_status.priv = req.Size;
dev->mem_start = (u_long)ei_status.mem;
- dev->mem_end = ei_status.rmem_end = (u_long)info->base + req.Size;
+ dev->mem_end = dev->mem_start + req.Size;
ei_status.tx_start_page = start_pg;
ei_status.rx_start_page = start_pg + TX_PAGES;
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 3b377f6cd4a..ad4b58af6b7 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1217,36 +1217,43 @@ ppp_push(struct ppp *ppp)
*/
static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
{
- int nch, len, fragsize;
+ int len, fragsize;
int i, bits, hdrlen, mtu;
- int flen, fnb;
+ int flen;
+ int navail, nfree;
+ int nbigger;
unsigned char *p, *q;
struct list_head *list;
struct channel *pch;
struct sk_buff *frag;
struct ppp_channel *chan;
- nch = 0;
+ nfree = 0; /* # channels which have no packet already queued */
+ navail = 0; /* total # of usable channels (not deregistered) */
hdrlen = (ppp->flags & SC_MP_XSHORTSEQ)? MPHDRLEN_SSN: MPHDRLEN;
+ i = 0;
list = &ppp->channels;
while ((list = list->next) != &ppp->channels) {
pch = list_entry(list, struct channel, clist);
- nch += pch->avail = (skb_queue_len(&pch->file.xq) == 0);
- /*
- * If a channel hasn't had a fragment yet, it has to get
- * one before we send any fragments on later channels.
- * If it can't take a fragment now, don't give any
- * to subsequent channels.
- */
- if (!pch->had_frag && !pch->avail) {
- while ((list = list->next) != &ppp->channels) {
- pch = list_entry(list, struct channel, clist);
- pch->avail = 0;
+ navail += pch->avail = (pch->chan != NULL);
+ if (pch->avail) {
+ if (skb_queue_len(&pch->file.xq) == 0
+ || !pch->had_frag) {
+ pch->avail = 2;
+ ++nfree;
}
- break;
+ if (!pch->had_frag && i < ppp->nxchan)
+ ppp->nxchan = i;
}
+ ++i;
}
- if (nch == 0)
+
+ /*
+ * Don't start sending this packet unless at least half of
+ * the channels are free. This gives much better TCP
+ * performance if we have a lot of channels.
+ */
+ if (nfree == 0 || nfree < navail / 2)
return 0; /* can't take now, leave it in xmit_pending */
/* Do protocol field compression (XXX this should be optional) */
@@ -1257,14 +1264,19 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
--len;
}
- /* decide on fragment size */
+ /*
+ * Decide on fragment size.
+ * We create a fragment for each free channel regardless of
+ * how small they are (i.e. even 0 length) in order to minimize
+ * the time that it will take to detect when a channel drops
+ * a fragment.
+ */
fragsize = len;
- if (nch > 1) {
- int maxch = ROUNDUP(len, MIN_FRAG_SIZE);
- if (nch > maxch)
- nch = maxch;
- fragsize = ROUNDUP(fragsize, nch);
- }
+ if (nfree > 1)
+ fragsize = ROUNDUP(fragsize, nfree);
+ /* nbigger channels get fragsize bytes, the rest get fragsize-1,
+ except if nbigger==0, then they all get fragsize. */
+ nbigger = len % nfree;
/* skip to the channel after the one we last used
and start at that one */
@@ -1278,7 +1290,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
/* create a fragment for each channel */
bits = B;
- do {
+ while (nfree > 0 || len > 0) {
list = list->next;
if (list == &ppp->channels) {
i = 0;
@@ -1289,61 +1301,92 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
if (!pch->avail)
continue;
+ /*
+ * Skip this channel if it has a fragment pending already and
+ * we haven't given a fragment to all of the free channels.
+ */
+ if (pch->avail == 1) {
+ if (nfree > 0)
+ continue;
+ } else {
+ --nfree;
+ pch->avail = 1;
+ }
+
/* check the channel's mtu and whether it is still attached. */
spin_lock_bh(&pch->downl);
- if (pch->chan == 0 || (mtu = pch->chan->mtu) < hdrlen) {
- /* can't use this channel */
+ if (pch->chan == NULL) {
+ /* can't use this channel, it's being deregistered */
spin_unlock_bh(&pch->downl);
pch->avail = 0;
- if (--nch == 0)
+ if (--navail == 0)
break;
continue;
}
/*
- * We have to create multiple fragments for this channel
- * if fragsize is greater than the channel's mtu.
+ * Create a fragment for this channel of
+ * min(max(mtu+2-hdrlen, 4), fragsize, len) bytes.
+ * If mtu+2-hdrlen < 4, that is a ridiculously small
+ * MTU, so we use mtu = 2 + hdrlen.
*/
if (fragsize > len)
fragsize = len;
- for (flen = fragsize; flen > 0; flen -= fnb) {
- fnb = flen;
- if (fnb > mtu + 2 - hdrlen)
- fnb = mtu + 2 - hdrlen;
- if (fnb >= len)
- bits |= E;
- frag = alloc_skb(fnb + hdrlen, GFP_ATOMIC);
- if (frag == 0)
- goto noskb;
- q = skb_put(frag, fnb + hdrlen);
- /* make the MP header */
- q[0] = PPP_MP >> 8;
- q[1] = PPP_MP;
- if (ppp->flags & SC_MP_XSHORTSEQ) {
- q[2] = bits + ((ppp->nxseq >> 8) & 0xf);
- q[3] = ppp->nxseq;
- } else {
- q[2] = bits;
- q[3] = ppp->nxseq >> 16;
- q[4] = ppp->nxseq >> 8;
- q[5] = ppp->nxseq;
- }
-
- /* copy the data in */
- memcpy(q + hdrlen, p, fnb);
-
- /* try to send it down the channel */
- chan = pch->chan;
- if (!chan->ops->start_xmit(chan, frag))
- skb_queue_tail(&pch->file.xq, frag);
- pch->had_frag = 1;
- p += fnb;
- len -= fnb;
- ++ppp->nxseq;
- bits = 0;
+ flen = fragsize;
+ mtu = pch->chan->mtu + 2 - hdrlen;
+ if (mtu < 4)
+ mtu = 4;
+ if (flen > mtu)
+ flen = mtu;
+ if (flen == len && nfree == 0)
+ bits |= E;
+ frag = alloc_skb(flen + hdrlen + (flen == 0), GFP_ATOMIC);
+ if (frag == 0)
+ goto noskb;
+ q = skb_put(frag, flen + hdrlen);
+
+ /* make the MP header */
+ q[0] = PPP_MP >> 8;
+ q[1] = PPP_MP;
+ if (ppp->flags & SC_MP_XSHORTSEQ) {
+ q[2] = bits + ((ppp->nxseq >> 8) & 0xf);
+ q[3] = ppp->nxseq;
+ } else {
+ q[2] = bits;
+ q[3] = ppp->nxseq >> 16;
+ q[4] = ppp->nxseq >> 8;
+ q[5] = ppp->nxseq;
}
+
+ /*
+ * Copy the data in.
+ * Unfortunately there is a bug in older versions of
+ * the Linux PPP multilink reconstruction code where it
+ * drops 0-length fragments. Therefore we make sure the
+ * fragment has at least one byte of data. Any bytes
+ * we add in this situation will end up as padding on the
+ * end of the reconstructed packet.
+ */
+ if (flen == 0)
+ *skb_put(frag, 1) = 0;
+ else
+ memcpy(q + hdrlen, p, flen);
+
+ /* try to send it down the channel */
+ chan = pch->chan;
+ if (skb_queue_len(&pch->file.xq)
+ || !chan->ops->start_xmit(chan, frag))
+ skb_queue_tail(&pch->file.xq, frag);
+ pch->had_frag = 1;
+ p += flen;
+ len -= flen;
+ ++ppp->nxseq;
+ bits = 0;
spin_unlock_bh(&pch->downl);
- } while (len > 0);
+
+ if (--nbigger == 0 && fragsize > 0)
+ --fragsize;
+ }
ppp->nxchan = i;
return 1;
@@ -1422,7 +1465,7 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb)
kfree_skb(skb);
return;
}
-
+
proto = PPP_PROTO(skb);
read_lock_bh(&pch->upl);
if (pch->ppp == 0 || proto >= 0xc000 || proto == PPP_CCPFRAG) {
@@ -1691,7 +1734,7 @@ ppp_receive_mp_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
struct list_head *l;
int mphdrlen = (ppp->flags & SC_MP_SHORTSEQ)? MPHDRLEN_SSN: MPHDRLEN;
- if (!pskb_may_pull(skb, mphdrlen + 1) || ppp->mrru == 0)
+ if (!pskb_may_pull(skb, mphdrlen) || ppp->mrru == 0)
goto err; /* no good, throw it away */
/* Decode sequence number and begin/end bits */
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index d6d0e43dab6..ce449fe90e6 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -69,7 +69,13 @@ VERSION 2.2LK <2005/01/25>
#include <asm/io.h>
#include <asm/irq.h>
-#define RTL8169_VERSION "2.2LK"
+#ifdef CONFIG_R8169_NAPI
+#define NAPI_SUFFIX "-NAPI"
+#else
+#define NAPI_SUFFIX ""
+#endif
+
+#define RTL8169_VERSION "2.2LK" NAPI_SUFFIX
#define MODULENAME "r8169"
#define PFX MODULENAME ": "
@@ -85,6 +91,10 @@ VERSION 2.2LK <2005/01/25>
#define dprintk(fmt, args...) do {} while (0)
#endif /* RTL8169_DEBUG */
+#define R8169_MSG_DEFAULT \
+ (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | NETIF_MSG_IFUP | \
+ NETIF_MSG_IFDOWN)
+
#define TX_BUFFS_AVAIL(tp) \
(tp->dirty_tx + NUM_TX_DESC - tp->cur_tx - 1)
@@ -174,8 +184,9 @@ const static struct {
#undef _R
static struct pci_device_id rtl8169_pci_tbl[] = {
- {0x10ec, 0x8169, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {0x1186, 0x4300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169), },
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4300), },
+ { PCI_DEVICE(0x16ec, 0x0116), },
{0,},
};
@@ -183,10 +194,15 @@ MODULE_DEVICE_TABLE(pci, rtl8169_pci_tbl);
static int rx_copybreak = 200;
static int use_dac;
+static struct {
+ u32 msg_enable;
+} debug = { -1 };
enum RTL8169_registers {
MAC0 = 0, /* Ethernet hardware address. */
MAR0 = 8, /* Multicast filter. */
+ CounterAddrLow = 0x10,
+ CounterAddrHigh = 0x14,
TxDescStartAddrLow = 0x20,
TxDescStartAddrHigh = 0x24,
TxHDescStartAddrLow = 0x28,
@@ -328,6 +344,9 @@ enum RTL8169_register_content {
/* _TBICSRBit */
TBILinkOK = 0x02000000,
+
+ /* DumpCounterCommand */
+ CounterDump = 0x8,
};
enum _DescStatusBit {
@@ -385,6 +404,7 @@ struct rtl8169_private {
struct pci_dev *pci_dev; /* Index of PCI device */
struct net_device_stats stats; /* statistics of net device */
spinlock_t lock; /* spin lock flag */
+ u32 msg_enable;
int chipset;
int mac_version;
int phy_version;
@@ -418,9 +438,13 @@ struct rtl8169_private {
MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver");
module_param_array(media, int, &num_media, 0);
+MODULE_PARM_DESC(media, "force phy operation. Deprecated by ethtool (8).");
module_param(rx_copybreak, int, 0);
+MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
module_param(use_dac, int, 0);
MODULE_PARM_DESC(use_dac, "Enable PCI DAC. Unsafe on 32 bit PCI slot.");
+module_param_named(debug, debug.msg_enable, int, 0);
+MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
MODULE_LICENSE("GPL");
MODULE_VERSION(RTL8169_VERSION);
@@ -433,10 +457,10 @@ static void rtl8169_hw_start(struct net_device *dev);
static int rtl8169_close(struct net_device *dev);
static void rtl8169_set_rx_mode(struct net_device *dev);
static void rtl8169_tx_timeout(struct net_device *dev);
-static struct net_device_stats *rtl8169_get_stats(struct net_device *netdev);
+static struct net_device_stats *rtl8169_get_stats(struct net_device *dev);
static int rtl8169_rx_interrupt(struct net_device *, struct rtl8169_private *,
void __iomem *);
-static int rtl8169_change_mtu(struct net_device *netdev, int new_mtu);
+static int rtl8169_change_mtu(struct net_device *dev, int new_mtu);
static void rtl8169_down(struct net_device *dev);
#ifdef CONFIG_R8169_NAPI
@@ -543,9 +567,13 @@ static void rtl8169_check_link_status(struct net_device *dev,
spin_lock_irqsave(&tp->lock, flags);
if (tp->link_ok(ioaddr)) {
netif_carrier_on(dev);
- printk(KERN_INFO PFX "%s: link up\n", dev->name);
- } else
+ if (netif_msg_ifup(tp))
+ printk(KERN_INFO PFX "%s: link up\n", dev->name);
+ } else {
+ if (netif_msg_ifdown(tp))
+ printk(KERN_INFO PFX "%s: link down\n", dev->name);
netif_carrier_off(dev);
+ }
spin_unlock_irqrestore(&tp->lock, flags);
}
@@ -569,7 +597,7 @@ static void rtl8169_link_option(int idx, u8 *autoneg, u16 *speed, u8 *duplex)
option = ((idx < MAX_UNITS) && (idx >= 0)) ? media[idx] : 0xff;
- if ((option != 0xff) && !idx)
+ if ((option != 0xff) && !idx && netif_msg_drv(&debug))
printk(KERN_WARNING PFX "media option is deprecated.\n");
for (p = link_settings; p->media != 0xff; p++) {
@@ -611,9 +639,11 @@ static int rtl8169_set_speed_tbi(struct net_device *dev,
} else if (autoneg == AUTONEG_ENABLE)
RTL_W32(TBICSR, reg | TBINwEnable | TBINwRestart);
else {
- printk(KERN_WARNING PFX
- "%s: incorrect speed setting refused in TBI mode\n",
- dev->name);
+ if (netif_msg_link(tp)) {
+ printk(KERN_WARNING "%s: "
+ "incorrect speed setting refused in TBI mode\n",
+ dev->name);
+ }
ret = -EOPNOTSUPP;
}
@@ -871,12 +901,120 @@ static void rtl8169_get_regs(struct net_device *dev, struct ethtool_regs *regs,
spin_unlock_irqrestore(&tp->lock, flags);
}
+static u32 rtl8169_get_msglevel(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ return tp->msg_enable;
+}
+
+static void rtl8169_set_msglevel(struct net_device *dev, u32 value)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ tp->msg_enable = value;
+}
+
+static const char rtl8169_gstrings[][ETH_GSTRING_LEN] = {
+ "tx_packets",
+ "rx_packets",
+ "tx_errors",
+ "rx_errors",
+ "rx_missed",
+ "align_errors",
+ "tx_single_collisions",
+ "tx_multi_collisions",
+ "unicast",
+ "broadcast",
+ "multicast",
+ "tx_aborted",
+ "tx_underrun",
+};
+
+struct rtl8169_counters {
+ u64 tx_packets;
+ u64 rx_packets;
+ u64 tx_errors;
+ u32 rx_errors;
+ u16 rx_missed;
+ u16 align_errors;
+ u32 tx_one_collision;
+ u32 tx_multi_collision;
+ u64 rx_unicast;
+ u64 rx_broadcast;
+ u32 rx_multicast;
+ u16 tx_aborted;
+ u16 tx_underun;
+};
+
+static int rtl8169_get_stats_count(struct net_device *dev)
+{
+ return ARRAY_SIZE(rtl8169_gstrings);
+}
+
+static void rtl8169_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct rtl8169_counters *counters;
+ dma_addr_t paddr;
+ u32 cmd;
+
+ ASSERT_RTNL();
+
+ counters = pci_alloc_consistent(tp->pci_dev, sizeof(*counters), &paddr);
+ if (!counters)
+ return;
+
+ RTL_W32(CounterAddrHigh, (u64)paddr >> 32);
+ cmd = (u64)paddr & DMA_32BIT_MASK;
+ RTL_W32(CounterAddrLow, cmd);
+ RTL_W32(CounterAddrLow, cmd | CounterDump);
+
+ while (RTL_R32(CounterAddrLow) & CounterDump) {
+ if (msleep_interruptible(1))
+ break;
+ }
+
+ RTL_W32(CounterAddrLow, 0);
+ RTL_W32(CounterAddrHigh, 0);
+
+ data[0] = le64_to_cpu(counters->tx_packets);
+ data[1] = le64_to_cpu(counters->rx_packets);
+ data[2] = le64_to_cpu(counters->tx_errors);
+ data[3] = le32_to_cpu(counters->rx_errors);
+ data[4] = le16_to_cpu(counters->rx_missed);
+ data[5] = le16_to_cpu(counters->align_errors);
+ data[6] = le32_to_cpu(counters->tx_one_collision);
+ data[7] = le32_to_cpu(counters->tx_multi_collision);
+ data[8] = le64_to_cpu(counters->rx_unicast);
+ data[9] = le64_to_cpu(counters->rx_broadcast);
+ data[10] = le32_to_cpu(counters->rx_multicast);
+ data[11] = le16_to_cpu(counters->tx_aborted);
+ data[12] = le16_to_cpu(counters->tx_underun);
+
+ pci_free_consistent(tp->pci_dev, sizeof(*counters), counters, paddr);
+}
+
+static void rtl8169_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ switch(stringset) {
+ case ETH_SS_STATS:
+ memcpy(data, *rtl8169_gstrings, sizeof(rtl8169_gstrings));
+ break;
+ }
+}
+
+
static struct ethtool_ops rtl8169_ethtool_ops = {
.get_drvinfo = rtl8169_get_drvinfo,
.get_regs_len = rtl8169_get_regs_len,
.get_link = ethtool_op_get_link,
.get_settings = rtl8169_get_settings,
.set_settings = rtl8169_set_settings,
+ .get_msglevel = rtl8169_get_msglevel,
+ .set_msglevel = rtl8169_set_msglevel,
.get_rx_csum = rtl8169_get_rx_csum,
.set_rx_csum = rtl8169_set_rx_csum,
.get_tx_csum = ethtool_op_get_tx_csum,
@@ -886,6 +1024,9 @@ static struct ethtool_ops rtl8169_ethtool_ops = {
.get_tso = ethtool_op_get_tso,
.set_tso = ethtool_op_set_tso,
.get_regs = rtl8169_get_regs,
+ .get_strings = rtl8169_get_strings,
+ .get_stats_count = rtl8169_get_stats_count,
+ .get_ethtool_stats = rtl8169_get_ethtool_stats,
};
static void rtl8169_write_gmii_reg_bit(void __iomem *ioaddr, int reg, int bitnum,
@@ -1091,7 +1232,8 @@ static void rtl8169_phy_timer(unsigned long __opaque)
if (tp->link_ok(ioaddr))
goto out_unlock;
- printk(KERN_WARNING PFX "%s: PHY reset until link up\n", dev->name);
+ if (netif_msg_link(tp))
+ printk(KERN_WARNING "%s: PHY reset until link up\n", dev->name);
tp->phy_reset_enable(ioaddr);
@@ -1169,18 +1311,23 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
/* dev zeroed in alloc_etherdev */
dev = alloc_etherdev(sizeof (*tp));
if (dev == NULL) {
- printk(KERN_ERR PFX "unable to alloc new ethernet\n");
+ if (netif_msg_drv(&debug))
+ printk(KERN_ERR PFX "unable to alloc new ethernet\n");
goto err_out;
}
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
tp = netdev_priv(dev);
+ tp->msg_enable = netif_msg_init(debug.msg_enable, R8169_MSG_DEFAULT);
/* enable device (incl. PCI PM wakeup and hotplug setup) */
rc = pci_enable_device(pdev);
- if (rc) {
- printk(KERN_ERR PFX "%s: enable failure\n", pci_name(pdev));
+ if (rc < 0) {
+ if (netif_msg_probe(tp)) {
+ printk(KERN_ERR PFX "%s: enable failure\n",
+ pci_name(pdev));
+ }
goto err_out_free_dev;
}
@@ -1196,29 +1343,39 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
pci_read_config_word(pdev, pm_cap + PCI_PM_CTRL, &pwr_command);
acpi_idle_state = pwr_command & PCI_PM_CTRL_STATE_MASK;
} else {
- printk(KERN_ERR PFX
- "Cannot find PowerManagement capability, aborting.\n");
+ if (netif_msg_probe(tp)) {
+ printk(KERN_ERR PFX
+ "Cannot find PowerManagement capability. "
+ "Aborting.\n");
+ }
goto err_out_mwi;
}
/* make sure PCI base addr 1 is MMIO */
if (!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
- printk(KERN_ERR PFX
- "region #1 not an MMIO resource, aborting\n");
+ if (netif_msg_probe(tp)) {
+ printk(KERN_ERR PFX
+ "region #1 not an MMIO resource, aborting\n");
+ }
rc = -ENODEV;
goto err_out_mwi;
}
/* check for weird/broken PCI region reporting */
if (pci_resource_len(pdev, 1) < R8169_REGS_SIZE) {
- printk(KERN_ERR PFX "Invalid PCI region size(s), aborting\n");
+ if (netif_msg_probe(tp)) {
+ printk(KERN_ERR PFX
+ "Invalid PCI region size(s), aborting\n");
+ }
rc = -ENODEV;
goto err_out_mwi;
}
rc = pci_request_regions(pdev, MODULENAME);
- if (rc) {
- printk(KERN_ERR PFX "%s: could not request regions.\n",
- pci_name(pdev));
+ if (rc < 0) {
+ if (netif_msg_probe(tp)) {
+ printk(KERN_ERR PFX "%s: could not request regions.\n",
+ pci_name(pdev));
+ }
goto err_out_mwi;
}
@@ -1231,7 +1388,10 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
} else {
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc < 0) {
- printk(KERN_ERR PFX "DMA configuration failed.\n");
+ if (netif_msg_probe(tp)) {
+ printk(KERN_ERR PFX
+ "DMA configuration failed.\n");
+ }
goto err_out_free_res;
}
}
@@ -1241,7 +1401,8 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
/* ioremap MMIO region */
ioaddr = ioremap(pci_resource_start(pdev, 1), R8169_REGS_SIZE);
if (ioaddr == NULL) {
- printk(KERN_ERR PFX "cannot remap MMIO, aborting\n");
+ if (netif_msg_probe(tp))
+ printk(KERN_ERR PFX "cannot remap MMIO, aborting\n");
rc = -EIO;
goto err_out_free_res;
}
@@ -1272,9 +1433,11 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
}
if (i < 0) {
/* Unknown chip: assume array element #0, original RTL-8169 */
- printk(KERN_DEBUG PFX
- "PCI device %s: unknown chip version, assuming %s\n",
- pci_name(pdev), rtl_chip_info[0].name);
+ if (netif_msg_probe(tp)) {
+ printk(KERN_DEBUG PFX "PCI device %s: "
+ "unknown chip version, assuming %s\n",
+ pci_name(pdev), rtl_chip_info[0].name);
+ }
i++;
}
tp->chipset = i;
@@ -1308,7 +1471,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
struct rtl8169_private *tp;
void __iomem *ioaddr = NULL;
static int board_idx = -1;
- static int printed_version = 0;
u8 autoneg, duplex;
u16 speed;
int i, rc;
@@ -1318,10 +1480,9 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
board_idx++;
- if (!printed_version) {
+ if (netif_msg_drv(&debug)) {
printk(KERN_INFO "%s Gigabit Ethernet driver %s loaded\n",
MODULENAME, RTL8169_VERSION);
- printed_version = 1;
}
rc = rtl8169_init_board(pdev, &dev, &ioaddr);
@@ -1366,7 +1527,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
#ifdef CONFIG_R8169_NAPI
dev->poll = rtl8169_poll;
dev->weight = R8169_NAPI_WEIGHT;
- printk(KERN_INFO PFX "NAPI enabled\n");
#endif
#ifdef CONFIG_R8169_VLAN
@@ -1391,20 +1551,24 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
return rc;
}
- printk(KERN_DEBUG "%s: Identified chip type is '%s'.\n", dev->name,
- rtl_chip_info[tp->chipset].name);
+ if (netif_msg_probe(tp)) {
+ printk(KERN_DEBUG "%s: Identified chip type is '%s'.\n",
+ dev->name, rtl_chip_info[tp->chipset].name);
+ }
pci_set_drvdata(pdev, dev);
- printk(KERN_INFO "%s: %s at 0x%lx, "
- "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, "
- "IRQ %d\n",
- dev->name,
- rtl_chip_info[ent->driver_data].name,
- dev->base_addr,
- dev->dev_addr[0], dev->dev_addr[1],
- dev->dev_addr[2], dev->dev_addr[3],
- dev->dev_addr[4], dev->dev_addr[5], dev->irq);
+ if (netif_msg_probe(tp)) {
+ printk(KERN_INFO "%s: %s at 0x%lx, "
+ "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, "
+ "IRQ %d\n",
+ dev->name,
+ rtl_chip_info[ent->driver_data].name,
+ dev->base_addr,
+ dev->dev_addr[0], dev->dev_addr[1],
+ dev->dev_addr[2], dev->dev_addr[3],
+ dev->dev_addr[4], dev->dev_addr[5], dev->irq);
+ }
rtl8169_hw_phy_config(dev);
@@ -1427,7 +1591,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
rtl8169_set_speed(dev, autoneg, speed, duplex);
- if (RTL_R8(PHYstatus) & TBI_Enable)
+ if ((RTL_R8(PHYstatus) & TBI_Enable) && netif_msg_link(tp))
printk(KERN_INFO PFX "%s: TBI auto-negotiating\n", dev->name);
return 0;
@@ -1860,8 +2024,13 @@ static void rtl8169_reinit_task(void *_data)
ret = rtl8169_open(dev);
if (unlikely(ret < 0)) {
if (net_ratelimit()) {
- printk(PFX KERN_ERR "%s: reinit failure (status = %d)."
- " Rescheduling.\n", dev->name, ret);
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ if (netif_msg_drv(tp)) {
+ printk(PFX KERN_ERR
+ "%s: reinit failure (status = %d)."
+ " Rescheduling.\n", dev->name, ret);
+ }
}
rtl8169_schedule_work(dev, rtl8169_reinit_task);
}
@@ -1886,8 +2055,12 @@ static void rtl8169_reset_task(void *_data)
netif_wake_queue(dev);
} else {
if (net_ratelimit()) {
- printk(PFX KERN_EMERG "%s: Rx buffers shortage\n",
- dev->name);
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ if (netif_msg_intr(tp)) {
+ printk(PFX KERN_EMERG
+ "%s: Rx buffers shortage\n", dev->name);
+ }
}
rtl8169_schedule_work(dev, rtl8169_reset_task);
}
@@ -1973,8 +2146,11 @@ static int rtl8169_start_xmit(struct sk_buff *skb, struct net_device *dev)
int ret = 0;
if (unlikely(TX_BUFFS_AVAIL(tp) < skb_shinfo(skb)->nr_frags)) {
- printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
- dev->name);
+ if (netif_msg_drv(tp)) {
+ printk(KERN_ERR
+ "%s: BUG! Tx Ring full when queue awake!\n",
+ dev->name);
+ }
goto err_stop;
}
@@ -2049,8 +2225,11 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev)
pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd);
pci_read_config_word(pdev, PCI_STATUS, &pci_status);
- printk(KERN_ERR PFX "%s: PCI error (cmd = 0x%04x, status = 0x%04x).\n",
- dev->name, pci_cmd, pci_status);
+ if (netif_msg_intr(tp)) {
+ printk(KERN_ERR
+ "%s: PCI error (cmd = 0x%04x, status = 0x%04x).\n",
+ dev->name, pci_cmd, pci_status);
+ }
/*
* The recovery sequence below admits a very elaborated explanation:
@@ -2069,7 +2248,8 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev)
/* The infamous DAC f*ckup only happens at boot time */
if ((tp->cp_cmd & PCIDAC) && !tp->dirty_rx && !tp->cur_rx) {
- printk(KERN_INFO PFX "%s: disabling PCI DAC.\n", dev->name);
+ if (netif_msg_intr(tp))
+ printk(KERN_INFO "%s: disabling PCI DAC.\n", dev->name);
tp->cp_cmd &= ~PCIDAC;
RTL_W16(CPlusCmd, tp->cp_cmd);
dev->features &= ~NETIF_F_HIGHDMA;
@@ -2180,7 +2360,7 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
rx_left = rtl8169_rx_quota(rx_left, (u32) dev->quota);
- while (rx_left > 0) {
+ for (; rx_left > 0; rx_left--, cur_rx++) {
unsigned int entry = cur_rx % NUM_RX_DESC;
struct RxDesc *desc = tp->RxDescArray + entry;
u32 status;
@@ -2190,9 +2370,12 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
if (status & DescOwn)
break;
- if (status & RxRES) {
- printk(KERN_INFO "%s: Rx ERROR. status = %08x\n",
- dev->name, status);
+ if (unlikely(status & RxRES)) {
+ if (netif_msg_rx_err(tp)) {
+ printk(KERN_INFO
+ "%s: Rx ERROR. status = %08x\n",
+ dev->name, status);
+ }
tp->stats.rx_errors++;
if (status & (RxRWT | RxRUNT))
tp->stats.rx_length_errors++;
@@ -2214,7 +2397,7 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
tp->stats.rx_dropped++;
tp->stats.rx_length_errors++;
rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
- goto move_on;
+ continue;
}
rtl8169_rx_csum(skb, desc);
@@ -2243,16 +2426,13 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
tp->stats.rx_bytes += pkt_size;
tp->stats.rx_packets++;
}
-move_on:
- cur_rx++;
- rx_left--;
}
count = cur_rx - tp->cur_rx;
tp->cur_rx = cur_rx;
delta = rtl8169_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx);
- if (!delta && count)
+ if (!delta && count && netif_msg_intr(tp))
printk(KERN_INFO "%s: no Rx buffer allocated\n", dev->name);
tp->dirty_rx += delta;
@@ -2263,7 +2443,7 @@ move_on:
* after refill ?
* - how do others driver handle this condition (Uh oh...).
*/
- if (tp->dirty_rx + NUM_RX_DESC == tp->cur_rx)
+ if ((tp->dirty_rx + NUM_RX_DESC == tp->cur_rx) && netif_msg_intr(tp))
printk(KERN_EMERG "%s: Rx buffers exhausted\n", dev->name);
return count;
@@ -2315,7 +2495,7 @@ rtl8169_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
if (likely(netif_rx_schedule_prep(dev)))
__netif_rx_schedule(dev);
- else {
+ else if (netif_msg_intr(tp)) {
printk(KERN_INFO "%s: interrupt %04x taken in poll\n",
dev->name, status);
}
@@ -2334,8 +2514,10 @@ rtl8169_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
} while (boguscnt > 0);
if (boguscnt <= 0) {
- printk(KERN_WARNING "%s: Too much work at interrupt!\n",
- dev->name);
+ if (net_ratelimit() && netif_msg_intr(tp)) {
+ printk(KERN_WARNING
+ "%s: Too much work at interrupt!\n", dev->name);
+ }
/* Clear all interrupt sources. */
RTL_W16(IntrStatus, 0xffff);
}
@@ -2458,8 +2640,10 @@ rtl8169_set_rx_mode(struct net_device *dev)
if (dev->flags & IFF_PROMISC) {
/* Unconditionally log net taps. */
- printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n",
- dev->name);
+ if (netif_msg_link(tp)) {
+ printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n",
+ dev->name);
+ }
rx_mode =
AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
AcceptAllPhys;
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index 05b827f79f5..1ccb2989001 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -4212,7 +4212,7 @@ SK_BOOL DualNet;
Flags);
SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_HARD_RST);
- pAC->dev[Param.Para32[0]]->flags &= ~IFF_RUNNING;
+ netif_carrier_off(pAC->dev[Param.Para32[0]]);
spin_unlock_irqrestore(
&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
Flags);
@@ -4355,7 +4355,7 @@ SK_BOOL DualNet;
}
/* Inform the world that link protocol is up. */
- pAC->dev[Param.Para32[0]]->flags |= IFF_RUNNING;
+ netif_carrier_on(pAC->dev[Param.Para32[0]]);
break;
case SK_DRV_NET_DOWN: /* SK_U32 Reason */
@@ -4368,7 +4368,7 @@ SK_BOOL DualNet;
} else {
DoPrintInterfaceChange = SK_TRUE;
}
- pAC->dev[Param.Para32[1]]->flags &= ~IFF_RUNNING;
+ netif_carrier_off(pAC->dev[Param.Para32[1]]);
break;
case SK_DRV_SWITCH_HARD: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
@@ -4961,7 +4961,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = &SkGePollController;
#endif
- dev->flags &= ~IFF_RUNNING;
SET_NETDEV_DEV(dev, &pdev->dev);
SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps);
@@ -5035,7 +5034,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
dev->set_mac_address = &SkGeSetMacAddr;
dev->do_ioctl = &SkGeIoctl;
dev->change_mtu = &SkGeChangeMtu;
- dev->flags &= ~IFF_RUNNING;
SET_NETDEV_DEV(dev, &pdev->dev);
SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps);
diff --git a/drivers/net/sk_g16.c b/drivers/net/sk_g16.c
deleted file mode 100644
index 134ae0e6495..00000000000
--- a/drivers/net/sk_g16.c
+++ /dev/null
@@ -1,2066 +0,0 @@
-/*-
- * Copyright (C) 1994 by PJD Weichmann & SWS Bern, Switzerland
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * Module : sk_g16.c
- *
- * Version : $Revision: 1.1 $
- *
- * Author : Patrick J.D. Weichmann
- *
- * Date Created : 94/05/26
- * Last Updated : $Date: 1994/06/30 16:25:15 $
- *
- * Description : Schneider & Koch G16 Ethernet Device Driver for
- * Linux Kernel >= 1.1.22
- * Update History :
- * Paul Gortmaker, 03/97: Fix for v2.1.x to use read{b,w}
- * write{b,w} and memcpy -> memcpy_{to,from}io
- *
- * Jeff Garzik, 06/2000, Modularize
- *
--*/
-
-static const char rcsid[] = "$Id: sk_g16.c,v 1.1 1994/06/30 16:25:15 root Exp $";
-
-/*
- * The Schneider & Koch (SK) G16 Network device driver is based
- * on the 'ni6510' driver from Michael Hipp which can be found at
- * ftp://sunsite.unc.edu/pub/Linux/system/Network/drivers/nidrivers.tar.gz
- *
- * Sources: 1) ni6510.c by M. Hipp
- * 2) depca.c by D.C. Davies
- * 3) skeleton.c by D. Becker
- * 4) Am7990 Local Area Network Controller for Ethernet (LANCE),
- * AMD, Pub. #05698, June 1989
- *
- * Many Thanks for helping me to get things working to:
- *
- * A. Cox (A.Cox@swansea.ac.uk)
- * M. Hipp (mhipp@student.uni-tuebingen.de)
- * R. Bolz (Schneider & Koch, Germany)
- *
- * To Do:
- * - Support of SK_G8 and other SK Network Cards.
- * - Autoset memory mapped RAM. Check for free memory and then
- * configure RAM correctly.
- * - SK_close should really set card in to initial state.
- * - Test if IRQ 3 is not switched off. Use autoirq() functionality.
- * (as in /drivers/net/skeleton.c)
- * - Implement Multicast addressing. At minimum something like
- * in depca.c.
- * - Redo the statistics part.
- * - Try to find out if the board is in 8 Bit or 16 Bit slot.
- * If in 8 Bit mode don't use IRQ 11.
- * - (Try to make it slightly faster.)
- * - Power management support
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/fcntl.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-
-#include "sk_g16.h"
-
-/*
- * Schneider & Koch Card Definitions
- * =================================
- */
-
-#define SK_NAME "SK_G16"
-
-/*
- * SK_G16 Configuration
- * --------------------
- */
-
-/*
- * Abbreviations
- * -------------
- *
- * RAM - used for the 16KB shared memory
- * Boot_ROM, ROM - are used for referencing the BootEPROM
- *
- * SK_BOOT_ROM and SK_ADDR are symbolic constants used to configure
- * the behaviour of the driver and the SK_G16.
- *
- * ! See sk_g16.install on how to install and configure the driver !
- *
- * SK_BOOT_ROM defines if the Boot_ROM should be switched off or not.
- *
- * SK_ADDR defines the address where the RAM will be mapped into the real
- * host memory.
- * valid addresses are from 0xa0000 to 0xfc000 in 16Kbyte steps.
- */
-
-#define SK_BOOT_ROM 1 /* 1=BootROM on 0=off */
-
-#define SK_ADDR 0xcc000
-
-/*
- * In POS3 are bits A14-A19 of the address bus. These bits can be set
- * to choose the RAM address. That's why we only can choose the RAM address
- * in 16KB steps.
- */
-
-#define POS_ADDR (rom_addr>>14) /* Do not change this line */
-
-/*
- * SK_G16 I/O PORT's + IRQ's + Boot_ROM locations
- * ----------------------------------------------
- */
-
-/*
- * As nearly every card has also SK_G16 a specified I/O Port region and
- * only a few possible IRQ's.
- * In the Installation Guide from Schneider & Koch is listed a possible
- * Interrupt IRQ2. IRQ2 is always IRQ9 in boards with two cascaded interrupt
- * controllers. So we use in SK_IRQS IRQ9.
- */
-
-/* Don't touch any of the following #defines. */
-
-#define SK_IO_PORTS { 0x100, 0x180, 0x208, 0x220, 0x288, 0x320, 0x328, 0x390, 0 }
-
-#define SK_IRQS { 3, 5, 9, 11, 0 }
-
-#define SK_BOOT_ROM_LOCATIONS { 0xc0000, 0xc4000, 0xc8000, 0xcc000, 0xd0000, 0xd4000, 0xd8000, 0xdc000, 0 }
-
-#define SK_BOOT_ROM_ID { 0x55, 0xaa, 0x10, 0x50, 0x06, 0x33 }
-
-/*
- * SK_G16 POS REGISTERS
- * --------------------
- */
-
-/*
- * SK_G16 has a Programmable Option Select (POS) Register.
- * The POS is composed of 8 separate registers (POS0-7) which
- * are I/O mapped on an address set by the W1 switch.
- *
- */
-
-#define SK_POS_SIZE 8 /* 8 I/O Ports are used by SK_G16 */
-
-#define SK_POS0 ioaddr /* Card-ID Low (R) */
-#define SK_POS1 ioaddr+1 /* Card-ID High (R) */
-#define SK_POS2 ioaddr+2 /* Card-Enable, Boot-ROM Disable (RW) */
-#define SK_POS3 ioaddr+3 /* Base address of RAM */
-#define SK_POS4 ioaddr+4 /* IRQ */
-
-/* POS5 - POS7 are unused */
-
-/*
- * SK_G16 MAC PREFIX
- * -----------------
- */
-
-/*
- * Scheider & Koch manufacturer code (00:00:a5).
- * This must be checked, that we are sure it is a SK card.
- */
-
-#define SK_MAC0 0x00
-#define SK_MAC1 0x00
-#define SK_MAC2 0x5a
-
-/*
- * SK_G16 ID
- * ---------
- */
-
-/*
- * If POS0,POS1 contain the following ID, then we know
- * at which I/O Port Address we are.
- */
-
-#define SK_IDLOW 0xfd
-#define SK_IDHIGH 0x6a
-
-
-/*
- * LANCE POS Bit definitions
- * -------------------------
- */
-
-#define SK_ROM_RAM_ON (POS2_CARD)
-#define SK_ROM_RAM_OFF (POS2_EPROM)
-#define SK_ROM_ON (inb(SK_POS2) & POS2_CARD)
-#define SK_ROM_OFF (inb(SK_POS2) | POS2_EPROM)
-#define SK_RAM_ON (inb(SK_POS2) | POS2_CARD)
-#define SK_RAM_OFF (inb(SK_POS2) & POS2_EPROM)
-
-#define POS2_CARD 0x0001 /* 1 = SK_G16 on 0 = off */
-#define POS2_EPROM 0x0002 /* 1 = Boot EPROM off 0 = on */
-
-/*
- * SK_G16 Memory mapped Registers
- * ------------------------------
- *
- */
-
-#define SK_IOREG (&board->ioreg) /* LANCE data registers. */
-#define SK_PORT (&board->port) /* Control, Status register */
-#define SK_IOCOM (&board->iocom) /* I/O Command */
-
-/*
- * SK_G16 Status/Control Register bits
- * -----------------------------------
- *
- * (C) Controlreg (S) Statusreg
- */
-
-/*
- * Register transfer: 0 = no transfer
- * 1 = transferring data between LANCE and I/O reg
- */
-#define SK_IORUN 0x20
-
-/*
- * LANCE interrupt: 0 = LANCE interrupt occurred
- * 1 = no LANCE interrupt occurred
- */
-#define SK_IRQ 0x10
-
-#define SK_RESET 0x08 /* Reset SK_CARD: 0 = RESET 1 = normal */
-#define SK_RW 0x02 /* 0 = write to 1 = read from */
-#define SK_ADR 0x01 /* 0 = REG DataPort 1 = RAP Reg addr port */
-
-
-#define SK_RREG SK_RW /* Transferdirection to read from lance */
-#define SK_WREG 0 /* Transferdirection to write to lance */
-#define SK_RAP SK_ADR /* Destination Register RAP */
-#define SK_RDATA 0 /* Destination Register REG DataPort */
-
-/*
- * SK_G16 I/O Command
- * ------------------
- */
-
-/*
- * Any bitcombination sets the internal I/O bit (transfer will start)
- * when written to I/O Command
- */
-
-#define SK_DOIO 0x80 /* Do Transfer */
-
-/*
- * LANCE RAP (Register Address Port).
- * ---------------------------------
- */
-
-/*
- * The LANCE internal registers are selected through the RAP.
- * The Registers are:
- *
- * CSR0 - Status and Control flags
- * CSR1 - Low order bits of initialize block (bits 15:00)
- * CSR2 - High order bits of initialize block (bits 07:00, 15:08 are reserved)
- * CSR3 - Allows redefinition of the Bus Master Interface.
- * This register must be set to 0x0002, which means BSWAP = 0,
- * ACON = 1, BCON = 0;
- *
- */
-
-#define CSR0 0x00
-#define CSR1 0x01
-#define CSR2 0x02
-#define CSR3 0x03
-
-/*
- * General Definitions
- * ===================
- */
-
-/*
- * Set the number of Tx and Rx buffers, using Log_2(# buffers).
- * We have 16KB RAM which can be accessed by the LANCE. In the
- * memory are not only the buffers but also the ring descriptors and
- * the initialize block.
- * Don't change anything unless you really know what you do.
- */
-
-#define LC_LOG_TX_BUFFERS 1 /* (2 == 2^^1) 2 Transmit buffers */
-#define LC_LOG_RX_BUFFERS 3 /* (8 == 2^^3) 8 Receive buffers */
-
-/* Descriptor ring sizes */
-
-#define TMDNUM (1 << (LC_LOG_TX_BUFFERS)) /* 2 Transmit descriptor rings */
-#define RMDNUM (1 << (LC_LOG_RX_BUFFERS)) /* 8 Receive Buffers */
-
-/* Define Mask for setting RMD, TMD length in the LANCE init_block */
-
-#define TMDNUMMASK (LC_LOG_TX_BUFFERS << 29)
-#define RMDNUMMASK (LC_LOG_RX_BUFFERS << 29)
-
-/*
- * Data Buffer size is set to maximum packet length.
- */
-
-#define PKT_BUF_SZ 1518
-
-/*
- * The number of low I/O ports used by the ethercard.
- */
-
-#define ETHERCARD_TOTAL_SIZE SK_POS_SIZE
-
-/*
- * SK_DEBUG
- *
- * Here you can choose what level of debugging wanted.
- *
- * If SK_DEBUG and SK_DEBUG2 are undefined, then only the
- * necessary messages will be printed.
- *
- * If SK_DEBUG is defined, there will be many debugging prints
- * which can help to find some mistakes in configuration or even
- * in the driver code.
- *
- * If SK_DEBUG2 is defined, many many messages will be printed
- * which normally you don't need. I used this to check the interrupt
- * routine.
- *
- * (If you define only SK_DEBUG2 then only the messages for
- * checking interrupts will be printed!)
- *
- * Normal way of live is:
- *
- * For the whole thing get going let both symbolic constants
- * undefined. If you face any problems and you know what's going
- * on (you know something about the card and you can interpret some
- * hex LANCE register output) then define SK_DEBUG
- *
- */
-
-#undef SK_DEBUG /* debugging */
-#undef SK_DEBUG2 /* debugging with more verbose report */
-
-#ifdef SK_DEBUG
-#define PRINTK(x) printk x
-#else
-#define PRINTK(x) /**/
-#endif
-
-#ifdef SK_DEBUG2
-#define PRINTK2(x) printk x
-#else
-#define PRINTK2(x) /**/
-#endif
-
-/*
- * SK_G16 RAM
- *
- * The components are memory mapped and can be set in a region from
- * 0x00000 through 0xfc000 in 16KB steps.
- *
- * The Network components are: dual ported RAM, Prom, I/O Reg, Status-,
- * Controlregister and I/O Command.
- *
- * dual ported RAM: This is the only memory region which the LANCE chip
- * has access to. From the Lance it is addressed from 0x0000 to
- * 0x3fbf. The host accesses it normally.
- *
- * PROM: The PROM obtains the ETHERNET-MAC-Address. It is realised as a
- * 8-Bit PROM, this means only the 16 even addresses are used of the
- * 32 Byte Address region. Access to an odd address results in invalid
- * data.
- *
- * LANCE I/O Reg: The I/O Reg is build of 4 single Registers, Low-Byte Write,
- * Hi-Byte Write, Low-Byte Read, Hi-Byte Read.
- * Transfer from or to the LANCE is always in 16Bit so Low and High
- * registers are always relevant.
- *
- * The Data from the Readregister is not the data in the Writeregister!!
- *
- * Port: Status- and Controlregister.
- * Two different registers which share the same address, Status is
- * read-only, Control is write-only.
- *
- * I/O Command:
- * Any bitcombination written in here starts the transmission between
- * Host and LANCE.
- */
-
-typedef struct
-{
- unsigned char ram[0x3fc0]; /* 16KB dual ported ram */
- unsigned char rom[0x0020]; /* 32Byte PROM containing 6Byte MAC */
- unsigned char res1[0x0010]; /* reserved */
- unsigned volatile short ioreg;/* LANCE I/O Register */
- unsigned volatile char port; /* Statusregister and Controlregister */
- unsigned char iocom; /* I/O Command Register */
-} SK_RAM;
-
-/* struct */
-
-/*
- * This is the structure for the dual ported ram. We
- * have exactly 16 320 Bytes. In here there must be:
- *
- * - Initialize Block (starting at a word boundary)
- * - Receive and Transmit Descriptor Rings (quadword boundary)
- * - Data Buffers (arbitrary boundary)
- *
- * This is because LANCE has on SK_G16 only access to the dual ported
- * RAM and nowhere else.
- */
-
-struct SK_ram
-{
- struct init_block ib;
- struct tmd tmde[TMDNUM];
- struct rmd rmde[RMDNUM];
- char tmdbuf[TMDNUM][PKT_BUF_SZ];
- char rmdbuf[RMDNUM][PKT_BUF_SZ];
-};
-
-/*
- * Structure where all necessary information is for ring buffer
- * management and statistics.
- */
-
-struct priv
-{
- struct SK_ram *ram; /* dual ported ram structure */
- struct rmd *rmdhead; /* start of receive ring descriptors */
- struct tmd *tmdhead; /* start of transmit ring descriptors */
- int rmdnum; /* actual used ring descriptor */
- int tmdnum; /* actual transmit descriptor for transmitting data */
- int tmdlast; /* last sent descriptor used for error handling, etc */
- void *rmdbufs[RMDNUM]; /* pointer to the receive buffers */
- void *tmdbufs[TMDNUM]; /* pointer to the transmit buffers */
- struct net_device_stats stats; /* Device driver statistics */
-};
-
-/* global variable declaration */
-
-/* IRQ map used to reserve a IRQ (see SK_open()) */
-
-/* static variables */
-
-static SK_RAM *board; /* pointer to our memory mapped board components */
-static DEFINE_SPINLOCK(SK_lock);
-
-/* Macros */
-
-
-/* Function Prototypes */
-
-/*
- * Device Driver functions
- * -----------------------
- * See for short explanation of each function its definitions header.
- */
-
-static int SK_probe(struct net_device *dev, short ioaddr);
-
-static void SK_timeout(struct net_device *dev);
-static int SK_open(struct net_device *dev);
-static int SK_send_packet(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t SK_interrupt(int irq, void *dev_id, struct pt_regs * regs);
-static void SK_rxintr(struct net_device *dev);
-static void SK_txintr(struct net_device *dev);
-static int SK_close(struct net_device *dev);
-
-static struct net_device_stats *SK_get_stats(struct net_device *dev);
-
-unsigned int SK_rom_addr(void);
-
-static void set_multicast_list(struct net_device *dev);
-
-/*
- * LANCE Functions
- * ---------------
- */
-
-static int SK_lance_init(struct net_device *dev, unsigned short mode);
-void SK_reset_board(void);
-void SK_set_RAP(int reg_number);
-int SK_read_reg(int reg_number);
-int SK_rread_reg(void);
-void SK_write_reg(int reg_number, int value);
-
-/*
- * Debugging functions
- * -------------------
- */
-
-void SK_print_pos(struct net_device *dev, char *text);
-void SK_print_dev(struct net_device *dev, char *text);
-void SK_print_ram(struct net_device *dev);
-
-
-/*-
- * Function : SK_init
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/05/26
- *
- * Description : Check for a SK_G16 network adaptor and initialize it.
- * This function gets called by dev_init which initializes
- * all Network devices.
- *
- * Parameters : I : struct net_device *dev - structure preconfigured
- * from Space.c
- * Return Value : 0 = Driver Found and initialized
- * Errors : ENODEV - no device found
- * ENXIO - not probed
- * Globals : None
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-static int io; /* 0 == probe */
-
-/*
- * Check for a network adaptor of this type, and return '0' if one exists.
- * If dev->base_addr == 0, probe all likely locations.
- * If dev->base_addr == 1, always return failure.
- */
-
-struct net_device * __init SK_init(int unit)
-{
- int *port, ports[] = SK_IO_PORTS; /* SK_G16 supported ports */
- static unsigned version_printed;
- struct net_device *dev = alloc_etherdev(sizeof(struct priv));
- int err = -ENODEV;
-
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- if (unit >= 0) {
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
- io = dev->base_addr;
- }
-
- if (version_printed++ == 0)
- PRINTK(("%s: %s", SK_NAME, rcsid));
-
- if (io > 0xff) { /* Check a single specified address */
- err = -EBUSY;
- /* Check if on specified address is a SK_G16 */
- if (request_region(io, ETHERCARD_TOTAL_SIZE, "sk_g16")) {
- err = SK_probe(dev, io);
- if (!err)
- goto got_it;
- release_region(io, ETHERCARD_TOTAL_SIZE);
- }
- } else if (io > 0) { /* Don't probe at all */
- err = -ENXIO;
- } else {
- /* Autoprobe base_addr */
- for (port = &ports[0]; *port; port++) {
- io = *port;
-
- /* Check if I/O Port region is used by another board */
- if (!request_region(io, ETHERCARD_TOTAL_SIZE, "sk_g16"))
- continue; /* Try next Port address */
-
- /* Check if at ioaddr is a SK_G16 */
- if (SK_probe(dev, io) == 0)
- goto got_it;
-
- release_region(io, ETHERCARD_TOTAL_SIZE);
- }
- }
-err_out:
- free_netdev(dev);
- return ERR_PTR(err);
-
-got_it:
- err = register_netdev(dev);
- if (err) {
- release_region(dev->base_addr, ETHERCARD_TOTAL_SIZE);
- goto err_out;
- }
- return dev;
-
-} /* End of SK_init */
-
-
-MODULE_AUTHOR("Patrick J.D. Weichmann");
-MODULE_DESCRIPTION("Schneider & Koch G16 Ethernet Device Driver");
-MODULE_LICENSE("GPL");
-MODULE_PARM(io, "i");
-MODULE_PARM_DESC(io, "0 to probe common ports (unsafe), or the I/O base of the board");
-
-
-#ifdef MODULE
-
-static struct net_device *SK_dev;
-
-static int __init SK_init_module (void)
-{
- SK_dev = SK_init(-1);
- return IS_ERR(SK_dev) ? PTR_ERR(SK_dev) : 0;
-}
-
-static void __exit SK_cleanup_module (void)
-{
- unregister_netdev(SK_dev);
- release_region(SK_dev->base_addr, ETHERCARD_TOTAL_SIZE);
- free_netdev(SK_dev);
-}
-
-module_init(SK_init_module);
-module_exit(SK_cleanup_module);
-#endif
-
-
-/*-
- * Function : SK_probe
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/05/26
- *
- * Description : This function is called by SK_init and
- * does the main part of initialization.
- *
- * Parameters : I : struct net_device *dev - SK_G16 device structure
- * I : short ioaddr - I/O Port address where POS is.
- * Return Value : 0 = Initialization done
- * Errors : ENODEV - No SK_G16 found
- * -1 - Configuration problem
- * Globals : board - pointer to SK_RAM
- * Update History :
- * YY/MM/DD uid Description
- * 94/06/30 pwe SK_ADDR now checked and at the correct place
--*/
-
-int __init SK_probe(struct net_device *dev, short ioaddr)
-{
- int i,j; /* Counters */
- int sk_addr_flag = 0; /* SK ADDR correct? 1 - no, 0 - yes */
- unsigned int rom_addr; /* used to store RAM address used for POS_ADDR */
-
- struct priv *p = netdev_priv(dev); /* SK_G16 private structure */
-
- if (inb(SK_POS0) != SK_IDLOW || inb(SK_POS1) != SK_IDHIGH)
- return -ENODEV;
- dev->base_addr = ioaddr;
-
- if (SK_ADDR & 0x3fff || SK_ADDR < 0xa0000)
- {
-
- sk_addr_flag = 1;
-
- /*
- * Now here we could use a routine which searches for a free
- * place in the ram and set SK_ADDR if found. TODO.
- */
- }
-
- if (SK_BOOT_ROM) /* Shall we keep Boot_ROM on ? */
- {
- PRINTK(("## %s: SK_BOOT_ROM is set.\n", SK_NAME));
-
- rom_addr = SK_rom_addr();
-
- if (rom_addr == 0) /* No Boot_ROM found */
- {
- if (sk_addr_flag) /* No or Invalid SK_ADDR is defined */
- {
- printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n",
- dev->name, SK_ADDR);
- return -1;
- }
-
- rom_addr = SK_ADDR; /* assign predefined address */
-
- PRINTK(("## %s: NO Bootrom found \n", SK_NAME));
-
- outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */
- outb(POS_ADDR, SK_POS3); /* Set RAM address */
- outb(SK_RAM_ON, SK_POS2); /* enable RAM */
- }
- else if (rom_addr == SK_ADDR)
- {
- printk("%s: RAM + ROM are set to the same address %#08x\n"
- " Check configuration. Now switching off Boot_ROM\n",
- SK_NAME, rom_addr);
-
- outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off*/
- outb(POS_ADDR, SK_POS3); /* Set RAM address */
- outb(SK_RAM_ON, SK_POS2); /* enable RAM */
- }
- else
- {
- PRINTK(("## %s: Found ROM at %#08x\n", SK_NAME, rom_addr));
- PRINTK(("## %s: Keeping Boot_ROM on\n", SK_NAME));
-
- if (sk_addr_flag) /* No or Invalid SK_ADDR is defined */
- {
- printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n",
- dev->name, SK_ADDR);
- return -1;
- }
-
- rom_addr = SK_ADDR;
-
- outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */
- outb(POS_ADDR, SK_POS3); /* Set RAM address */
- outb(SK_ROM_RAM_ON, SK_POS2); /* RAM on, BOOT_ROM on */
- }
- }
- else /* Don't keep Boot_ROM */
- {
- PRINTK(("## %s: SK_BOOT_ROM is not set.\n", SK_NAME));
-
- if (sk_addr_flag) /* No or Invalid SK_ADDR is defined */
- {
- printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n",
- dev->name, SK_ADDR);
- return -1;
- }
-
- rom_addr = SK_rom_addr(); /* Try to find a Boot_ROM */
-
- /* IF we find a Boot_ROM disable it */
-
- outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */
-
- /* We found a Boot_ROM and it's gone. Set RAM address on
- * Boot_ROM address.
- */
-
- if (rom_addr)
- {
- printk("%s: We found Boot_ROM at %#08x. Now setting RAM on"
- "that address\n", SK_NAME, rom_addr);
-
- outb(POS_ADDR, SK_POS3); /* Set RAM on Boot_ROM address */
- }
- else /* We did not find a Boot_ROM, use predefined SK_ADDR for ram */
- {
- if (sk_addr_flag) /* No or Invalid SK_ADDR is defined */
- {
- printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n",
- dev->name, SK_ADDR);
- return -1;
- }
-
- rom_addr = SK_ADDR;
-
- outb(POS_ADDR, SK_POS3); /* Set RAM address */
- }
- outb(SK_RAM_ON, SK_POS2); /* enable RAM */
- }
-
-#ifdef SK_DEBUG
- SK_print_pos(dev, "POS registers after ROM, RAM config");
-#endif
-
- board = (SK_RAM *) isa_bus_to_virt(rom_addr);
-
- /* Read in station address */
- for (i = 0, j = 0; i < ETH_ALEN; i++, j+=2)
- {
- dev->dev_addr[i] = readb(board->rom+j);
- }
-
- /* Check for manufacturer code */
- if (!(dev->dev_addr[0] == SK_MAC0 &&
- dev->dev_addr[1] == SK_MAC1 &&
- dev->dev_addr[2] == SK_MAC2) )
- {
- PRINTK(("## %s: We did not find SK_G16 at RAM location.\n",
- SK_NAME));
- return -ENODEV; /* NO SK_G16 found */
- }
-
- printk("%s: %s found at %#3x, HW addr: %#04x:%02x:%02x:%02x:%02x:%02x\n",
- dev->name,
- "Schneider & Koch Netcard",
- (unsigned int) dev->base_addr,
- dev->dev_addr[0],
- dev->dev_addr[1],
- dev->dev_addr[2],
- dev->dev_addr[3],
- dev->dev_addr[4],
- dev->dev_addr[5]);
-
- memset((char *) dev->priv, 0, sizeof(struct priv)); /* clear memory */
-
- /* Assign our Device Driver functions */
-
- dev->open = SK_open;
- dev->stop = SK_close;
- dev->hard_start_xmit = SK_send_packet;
- dev->get_stats = SK_get_stats;
- dev->set_multicast_list = set_multicast_list;
- dev->tx_timeout = SK_timeout;
- dev->watchdog_timeo = HZ/7;
-
-
- dev->flags &= ~IFF_MULTICAST;
-
- /* Initialize private structure */
-
- p->ram = (struct SK_ram *) rom_addr; /* Set dual ported RAM addr */
- p->tmdhead = &(p->ram)->tmde[0]; /* Set TMD head */
- p->rmdhead = &(p->ram)->rmde[0]; /* Set RMD head */
-
- /* Initialize buffer pointers */
-
- for (i = 0; i < TMDNUM; i++)
- {
- p->tmdbufs[i] = &(p->ram)->tmdbuf[i];
- }
-
- for (i = 0; i < RMDNUM; i++)
- {
- p->rmdbufs[i] = &(p->ram)->rmdbuf[i];
- }
-
-#ifdef SK_DEBUG
- SK_print_pos(dev, "End of SK_probe");
- SK_print_ram(dev);
-#endif
- return 0; /* Initialization done */
-} /* End of SK_probe() */
-
-
-/*-
- * Function : SK_open
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/05/26
- *
- * Description : This function is called sometimes after booting
- * when ifconfig program is run.
- *
- * This function requests an IRQ, sets the correct
- * IRQ in the card. Then calls SK_lance_init() to
- * init and start the LANCE chip. Then if everything is
- * ok returns with 0 (OK), which means SK_G16 is now
- * opened and operational.
- *
- * (Called by dev_open() /net/inet/dev.c)
- *
- * Parameters : I : struct net_device *dev - SK_G16 device structure
- * Return Value : 0 - Device opened
- * Errors : -EAGAIN - Open failed
- * Side Effects : None
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-static int SK_open(struct net_device *dev)
-{
- int i = 0;
- int irqval = 0;
- int ioaddr = dev->base_addr;
-
- int irqtab[] = SK_IRQS;
-
- struct priv *p = netdev_priv(dev);
-
- PRINTK(("## %s: At beginning of SK_open(). CSR0: %#06x\n",
- SK_NAME, SK_read_reg(CSR0)));
-
- if (dev->irq == 0) /* Autoirq */
- {
- i = 0;
-
- /*
- * Check if one IRQ out of SK_IRQS is free and install
- * interrupt handler.
- * Most done by request_irq().
- * irqval: 0 - interrupt handler installed for IRQ irqtab[i]
- * -EBUSY - interrupt busy
- * -EINVAL - irq > 15 or handler = NULL
- */
-
- do
- {
- irqval = request_irq(irqtab[i], &SK_interrupt, 0, "sk_g16", dev);
- i++;
- } while (irqval && irqtab[i]);
-
- if (irqval) /* We tried every possible IRQ but no success */
- {
- printk("%s: unable to get an IRQ\n", dev->name);
- return -EAGAIN;
- }
-
- dev->irq = irqtab[--i];
-
- outb(i<<2, SK_POS4); /* Set Card on probed IRQ */
-
- }
- else if (dev->irq == 2) /* IRQ2 is always IRQ9 */
- {
- if (request_irq(9, &SK_interrupt, 0, "sk_g16", dev))
- {
- printk("%s: unable to get IRQ 9\n", dev->name);
- return -EAGAIN;
- }
- dev->irq = 9;
-
- /*
- * Now we set card on IRQ2.
- * This can be confusing, but remember that IRQ2 on the network
- * card is in reality IRQ9
- */
- outb(0x08, SK_POS4); /* set card to IRQ2 */
-
- }
- else /* Check IRQ as defined in Space.c */
- {
- int i = 0;
-
- /* check if IRQ free and valid. Then install Interrupt handler */
-
- if (request_irq(dev->irq, &SK_interrupt, 0, "sk_g16", dev))
- {
- printk("%s: unable to get selected IRQ\n", dev->name);
- return -EAGAIN;
- }
-
- switch(dev->irq)
- {
- case 3: i = 0;
- break;
- case 5: i = 1;
- break;
- case 2: i = 2;
- break;
- case 11:i = 3;
- break;
- default:
- printk("%s: Preselected IRQ %d is invalid for %s boards",
- dev->name,
- dev->irq,
- SK_NAME);
- return -EAGAIN;
- }
-
- outb(i<<2, SK_POS4); /* Set IRQ on card */
- }
-
- printk("%s: Schneider & Koch G16 at %#3x, IRQ %d, shared mem at %#08x\n",
- dev->name, (unsigned int)dev->base_addr,
- (int) dev->irq, (unsigned int) p->ram);
-
- if (!(i = SK_lance_init(dev, 0))) /* LANCE init OK? */
- {
- netif_start_queue(dev);
-
-#ifdef SK_DEBUG
-
- /*
- * This debug block tries to stop LANCE,
- * reinit LANCE with transmitter and receiver disabled,
- * then stop again and reinit with NORMAL_MODE
- */
-
- printk("## %s: After lance init. CSR0: %#06x\n",
- SK_NAME, SK_read_reg(CSR0));
- SK_write_reg(CSR0, CSR0_STOP);
- printk("## %s: LANCE stopped. CSR0: %#06x\n",
- SK_NAME, SK_read_reg(CSR0));
- SK_lance_init(dev, MODE_DTX | MODE_DRX);
- printk("## %s: Reinit with DTX + DRX off. CSR0: %#06x\n",
- SK_NAME, SK_read_reg(CSR0));
- SK_write_reg(CSR0, CSR0_STOP);
- printk("## %s: LANCE stopped. CSR0: %#06x\n",
- SK_NAME, SK_read_reg(CSR0));
- SK_lance_init(dev, MODE_NORMAL);
- printk("## %s: LANCE back to normal mode. CSR0: %#06x\n",
- SK_NAME, SK_read_reg(CSR0));
- SK_print_pos(dev, "POS regs before returning OK");
-
-#endif /* SK_DEBUG */
-
- return 0; /* SK_open() is successful */
- }
- else /* LANCE init failed */
- {
-
- PRINTK(("## %s: LANCE init failed: CSR0: %#06x\n",
- SK_NAME, SK_read_reg(CSR0)));
-
- return -EAGAIN;
- }
-
-} /* End of SK_open() */
-
-
-/*-
- * Function : SK_lance_init
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/05/26
- *
- * Description : Reset LANCE chip, fill RMD, TMD structures with
- * start values and Start LANCE.
- *
- * Parameters : I : struct net_device *dev - SK_G16 device structure
- * I : int mode - put LANCE into "mode" see data-sheet for
- * more info.
- * Return Value : 0 - Init done
- * Errors : -1 - Init failed
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-static int SK_lance_init(struct net_device *dev, unsigned short mode)
-{
- int i;
- unsigned long flags;
- struct priv *p = netdev_priv(dev);
- struct tmd *tmdp;
- struct rmd *rmdp;
-
- PRINTK(("## %s: At beginning of LANCE init. CSR0: %#06x\n",
- SK_NAME, SK_read_reg(CSR0)));
-
- /* Reset LANCE */
- SK_reset_board();
-
- /* Initialize TMD's with start values */
- p->tmdnum = 0; /* First descriptor for transmitting */
- p->tmdlast = 0; /* First descriptor for reading stats */
-
- for (i = 0; i < TMDNUM; i++) /* Init all TMD's */
- {
- tmdp = p->tmdhead + i;
-
- writel((unsigned long) p->tmdbufs[i], tmdp->u.buffer); /* assign buffer */
-
- /* Mark TMD as start and end of packet */
- writeb(TX_STP | TX_ENP, &tmdp->u.s.status);
- }
-
-
- /* Initialize RMD's with start values */
-
- p->rmdnum = 0; /* First RMD which will be used */
-
- for (i = 0; i < RMDNUM; i++) /* Init all RMD's */
- {
- rmdp = p->rmdhead + i;
-
-
- writel((unsigned long) p->rmdbufs[i], rmdp->u.buffer); /* assign buffer */
-
- /*
- * LANCE must be owner at beginning so that he can fill in
- * receiving packets, set status and release RMD
- */
-
- writeb(RX_OWN, &rmdp->u.s.status);
-
- writew(-PKT_BUF_SZ, &rmdp->blen); /* Buffer Size (two's complement) */
-
- writeb(0, &rmdp->mlen); /* init message length */
-
- }
-
- /* Fill LANCE Initialize Block */
-
- writew(mode, (&((p->ram)->ib.mode))); /* Set operation mode */
-
- for (i = 0; i < ETH_ALEN; i++) /* Set physical address */
- {
- writeb(dev->dev_addr[i], (&((p->ram)->ib.paddr[i])));
- }
-
- for (i = 0; i < 8; i++) /* Set multicast, logical address */
- {
- writeb(0, (&((p->ram)->ib.laddr[i]))); /* We do not use logical addressing */
- }
-
- /* Set ring descriptor pointers and set number of descriptors */
-
- writel((int)p->rmdhead | RMDNUMMASK, (&((p->ram)->ib.rdrp)));
- writel((int)p->tmdhead | TMDNUMMASK, (&((p->ram)->ib.tdrp)));
-
- /* Prepare LANCE Control and Status Registers */
-
- spin_lock_irqsave(&SK_lock, flags);
-
- SK_write_reg(CSR3, CSR3_ACON); /* Ale Control !!!THIS MUST BE SET!!!! */
-
- /*
- * LANCE addresses the RAM from 0x0000 to 0x3fbf and has no access to
- * PC Memory locations.
- *
- * In structure SK_ram is defined that the first thing in ram
- * is the initialization block. So his address is for LANCE always
- * 0x0000
- *
- * CSR1 contains low order bits 15:0 of initialization block address
- * CSR2 is built of:
- * 7:0 High order bits 23:16 of initialization block address
- * 15:8 reserved, must be 0
- */
-
- /* Set initialization block address (must be on word boundary) */
- SK_write_reg(CSR1, 0); /* Set low order bits 15:0 */
- SK_write_reg(CSR2, 0); /* Set high order bits 23:16 */
-
-
- PRINTK(("## %s: After setting CSR1-3. CSR0: %#06x\n",
- SK_NAME, SK_read_reg(CSR0)));
-
- /* Initialize LANCE */
-
- /*
- * INIT = Initialize, when set, causes the LANCE to begin the
- * initialization procedure and access the Init Block.
- */
-
- SK_write_reg(CSR0, CSR0_INIT);
-
- spin_unlock_irqrestore(&SK_lock, flags);
-
- /* Wait until LANCE finished initialization */
-
- SK_set_RAP(CSR0); /* Register Address Pointer to CSR0 */
-
- for (i = 0; (i < 100) && !(SK_rread_reg() & CSR0_IDON); i++)
- ; /* Wait until init done or go ahead if problems (i>=100) */
-
- if (i >= 100) /* Something is wrong ! */
- {
- printk("%s: can't init am7990, status: %04x "
- "init_block: %#08x\n",
- dev->name, (int) SK_read_reg(CSR0),
- (unsigned int) &(p->ram)->ib);
-
-#ifdef SK_DEBUG
- SK_print_pos(dev, "LANCE INIT failed");
- SK_print_dev(dev,"Device Structure:");
-#endif
-
- return -1; /* LANCE init failed */
- }
-
- PRINTK(("## %s: init done after %d ticks\n", SK_NAME, i));
-
- /* Clear Initialize done, enable Interrupts, start LANCE */
-
- SK_write_reg(CSR0, CSR0_IDON | CSR0_INEA | CSR0_STRT);
-
- PRINTK(("## %s: LANCE started. CSR0: %#06x\n", SK_NAME,
- SK_read_reg(CSR0)));
-
- return 0; /* LANCE is up and running */
-
-} /* End of SK_lance_init() */
-
-
-
-/*-
- * Function : SK_send_packet
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/05/27
- *
- * Description : Writes an socket buffer into a transmit descriptor
- * and starts transmission.
- *
- * Parameters : I : struct sk_buff *skb - packet to transfer
- * I : struct net_device *dev - SK_G16 device structure
- * Return Value : 0 - OK
- * 1 - Could not transmit (dev_queue_xmit will queue it)
- * and try to sent it later
- * Globals : None
- * Side Effects : None
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-static void SK_timeout(struct net_device *dev)
-{
- printk(KERN_WARNING "%s: xmitter timed out, try to restart!\n", dev->name);
- SK_lance_init(dev, MODE_NORMAL); /* Reinit LANCE */
- netif_wake_queue(dev); /* Clear Transmitter flag */
- dev->trans_start = jiffies; /* Mark Start of transmission */
-}
-
-static int SK_send_packet(struct sk_buff *skb, struct net_device *dev)
-{
- struct priv *p = netdev_priv(dev);
- struct tmd *tmdp;
- static char pad[64];
-
- PRINTK2(("## %s: SK_send_packet() called, CSR0 %#04x.\n",
- SK_NAME, SK_read_reg(CSR0)));
-
-
- /*
- * Block a timer-based transmit from overlapping.
- * This means check if we are already in.
- */
-
- netif_stop_queue (dev);
-
- {
-
- /* Evaluate Packet length */
- short len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
-
- tmdp = p->tmdhead + p->tmdnum; /* Which descriptor for transmitting */
-
- /* Fill in Transmit Message Descriptor */
-
- /* Copy data into dual ported ram */
-
- memcpy_toio((tmdp->u.buffer & 0x00ffffff), skb->data, skb->len);
- if (len != skb->len)
- memcpy_toio((tmdp->u.buffer & 0x00ffffff) + skb->len, pad, len-skb->len);
-
- writew(-len, &tmdp->blen); /* set length to transmit */
-
- /*
- * Packet start and end is always set because we use the maximum
- * packet length as buffer length.
- * Relinquish ownership to LANCE
- */
-
- writeb(TX_OWN | TX_STP | TX_ENP, &tmdp->u.s.status);
-
- /* Start Demand Transmission */
- SK_write_reg(CSR0, CSR0_TDMD | CSR0_INEA);
-
- dev->trans_start = jiffies; /* Mark start of transmission */
-
- /* Set pointer to next transmit buffer */
- p->tmdnum++;
- p->tmdnum &= TMDNUM-1;
-
- /* Do we own the next transmit buffer ? */
- if (! (readb(&((p->tmdhead + p->tmdnum)->u.s.status)) & TX_OWN) )
- {
- /*
- * We own next buffer and are ready to transmit, so
- * clear busy flag
- */
- netif_start_queue(dev);
- }
-
- p->stats.tx_bytes += skb->len;
-
- }
-
- dev_kfree_skb(skb);
- return 0;
-} /* End of SK_send_packet */
-
-
-/*-
- * Function : SK_interrupt
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/05/27
- *
- * Description : SK_G16 interrupt handler which checks for LANCE
- * Errors, handles transmit and receive interrupts
- *
- * Parameters : I : int irq, void *dev_id, struct pt_regs * regs -
- * Return Value : None
- * Errors : None
- * Globals : None
- * Side Effects : None
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-static irqreturn_t SK_interrupt(int irq, void *dev_id, struct pt_regs * regs)
-{
- int csr0;
- struct net_device *dev = dev_id;
- struct priv *p = netdev_priv(dev);
-
-
- PRINTK2(("## %s: SK_interrupt(). status: %#06x\n",
- SK_NAME, SK_read_reg(CSR0)));
-
- if (dev == NULL)
- {
- printk("SK_interrupt(): IRQ %d for unknown device.\n", irq);
- }
-
- spin_lock (&SK_lock);
-
- csr0 = SK_read_reg(CSR0); /* store register for checking */
-
- /*
- * Acknowledge all of the current interrupt sources, disable
- * Interrupts (INEA = 0)
- */
-
- SK_write_reg(CSR0, csr0 & CSR0_CLRALL);
-
- if (csr0 & CSR0_ERR) /* LANCE Error */
- {
- printk("%s: error: %04x\n", dev->name, csr0);
-
- if (csr0 & CSR0_MISS) /* No place to store packet ? */
- {
- p->stats.rx_dropped++;
- }
- }
-
- if (csr0 & CSR0_RINT) /* Receive Interrupt (packet arrived) */
- {
- SK_rxintr(dev);
- }
-
- if (csr0 & CSR0_TINT) /* Transmit interrupt (packet sent) */
- {
- SK_txintr(dev);
- }
-
- SK_write_reg(CSR0, CSR0_INEA); /* Enable Interrupts */
-
- spin_unlock (&SK_lock);
- return IRQ_HANDLED;
-} /* End of SK_interrupt() */
-
-
-/*-
- * Function : SK_txintr
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/05/27
- *
- * Description : After sending a packet we check status, update
- * statistics and relinquish ownership of transmit
- * descriptor ring.
- *
- * Parameters : I : struct net_device *dev - SK_G16 device structure
- * Return Value : None
- * Errors : None
- * Globals : None
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-static void SK_txintr(struct net_device *dev)
-{
- int tmdstat;
- struct tmd *tmdp;
- struct priv *p = netdev_priv(dev);
-
-
- PRINTK2(("## %s: SK_txintr() status: %#06x\n",
- SK_NAME, SK_read_reg(CSR0)));
-
- tmdp = p->tmdhead + p->tmdlast; /* Which buffer we sent at last ? */
-
- /* Set next buffer */
- p->tmdlast++;
- p->tmdlast &= TMDNUM-1;
-
- tmdstat = readb(&tmdp->u.s.status);
-
- /*
- * We check status of transmitted packet.
- * see LANCE data-sheet for error explanation
- */
- if (tmdstat & TX_ERR) /* Error occurred */
- {
- int stat2 = readw(&tmdp->status2);
-
- printk("%s: TX error: %04x %04x\n", dev->name, tmdstat, stat2);
-
- if (stat2 & TX_TDR) /* TDR problems? */
- {
- printk("%s: tdr-problems \n", dev->name);
- }
-
- if (stat2 & TX_RTRY) /* Failed in 16 attempts to transmit ? */
- p->stats.tx_aborted_errors++;
- if (stat2 & TX_LCOL) /* Late collision ? */
- p->stats.tx_window_errors++;
- if (stat2 & TX_LCAR) /* Loss of Carrier ? */
- p->stats.tx_carrier_errors++;
- if (stat2 & TX_UFLO) /* Underflow error ? */
- {
- p->stats.tx_fifo_errors++;
-
- /*
- * If UFLO error occurs it will turn transmitter of.
- * So we must reinit LANCE
- */
-
- SK_lance_init(dev, MODE_NORMAL);
- }
-
- p->stats.tx_errors++;
-
- writew(0, &tmdp->status2); /* Clear error flags */
- }
- else if (tmdstat & TX_MORE) /* Collisions occurred ? */
- {
- /*
- * Here I have a problem.
- * I only know that there must be one or up to 15 collisions.
- * That's why TX_MORE is set, because after 16 attempts TX_RTRY
- * will be set which means couldn't send packet aborted transfer.
- *
- * First I did not have this in but then I thought at minimum
- * we see that something was not ok.
- * If anyone knows something better than this to handle this
- * please report it.
- */
-
- p->stats.collisions++;
- }
- else /* Packet sent without any problems */
- {
- p->stats.tx_packets++;
- }
-
- /*
- * We mark transmitter not busy anymore, because now we have a free
- * transmit descriptor which can be filled by SK_send_packet and
- * afterwards sent by the LANCE
- *
- * The function which do handle slow IRQ parts is do_bottom_half()
- * which runs at normal kernel priority, that means all interrupt are
- * enabled. (see kernel/irq.c)
- *
- * net_bh does something like this:
- * - check if already in net_bh
- * - try to transmit something from the send queue
- * - if something is in the receive queue send it up to higher
- * levels if it is a known protocol
- * - try to transmit something from the send queue
- */
-
- netif_wake_queue(dev);
-
-} /* End of SK_txintr() */
-
-
-/*-
- * Function : SK_rxintr
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/05/27
- *
- * Description : Buffer sent, check for errors, relinquish ownership
- * of the receive message descriptor.
- *
- * Parameters : I : SK_G16 device structure
- * Return Value : None
- * Globals : None
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-static void SK_rxintr(struct net_device *dev)
-{
-
- struct rmd *rmdp;
- int rmdstat;
- struct priv *p = netdev_priv(dev);
-
- PRINTK2(("## %s: SK_rxintr(). CSR0: %#06x\n",
- SK_NAME, SK_read_reg(CSR0)));
-
- rmdp = p->rmdhead + p->rmdnum;
-
- /* As long as we own the next entry, check status and send
- * it up to higher layer
- */
-
- while (!( (rmdstat = readb(&rmdp->u.s.status)) & RX_OWN))
- {
- /*
- * Start and end of packet must be set, because we use
- * the ethernet maximum packet length (1518) as buffer size.
- *
- * Because our buffers are at maximum OFLO and BUFF errors are
- * not to be concerned (see Data sheet)
- */
-
- if ((rmdstat & (RX_STP | RX_ENP)) != (RX_STP | RX_ENP))
- {
- /* Start of a frame > 1518 Bytes ? */
-
- if (rmdstat & RX_STP)
- {
- p->stats.rx_errors++; /* bad packet received */
- p->stats.rx_length_errors++; /* packet too long */
-
- printk("%s: packet too long\n", dev->name);
- }
-
- /*
- * All other packets will be ignored until a new frame with
- * start (RX_STP) set follows.
- *
- * What we do is just give descriptor free for new incoming
- * packets.
- */
-
- writeb(RX_OWN, &rmdp->u.s.status); /* Relinquish ownership to LANCE */
-
- }
- else if (rmdstat & RX_ERR) /* Receive Error ? */
- {
- printk("%s: RX error: %04x\n", dev->name, (int) rmdstat);
-
- p->stats.rx_errors++;
-
- if (rmdstat & RX_FRAM) p->stats.rx_frame_errors++;
- if (rmdstat & RX_CRC) p->stats.rx_crc_errors++;
-
- writeb(RX_OWN, &rmdp->u.s.status); /* Relinquish ownership to LANCE */
-
- }
- else /* We have a packet which can be queued for the upper layers */
- {
-
- int len = readw(&rmdp->mlen) & 0x0fff; /* extract message length from receive buffer */
- struct sk_buff *skb;
-
- skb = dev_alloc_skb(len+2); /* allocate socket buffer */
-
- if (skb == NULL) /* Could not get mem ? */
- {
-
- /*
- * Couldn't allocate sk_buffer so we give descriptor back
- * to Lance, update statistics and go ahead.
- */
-
- writeb(RX_OWN, &rmdp->u.s.status); /* Relinquish ownership to LANCE */
- printk("%s: Couldn't allocate sk_buff, deferring packet.\n",
- dev->name);
- p->stats.rx_dropped++;
-
- break; /* Jump out */
- }
-
- /* Prepare sk_buff to queue for upper layers */
-
- skb->dev = dev;
- skb_reserve(skb,2); /* Align IP header on 16 byte boundary */
-
- /*
- * Copy data out of our receive descriptor into sk_buff.
- *
- * (rmdp->u.buffer & 0x00ffffff) -> get address of buffer and
- * ignore status fields)
- */
-
- memcpy_fromio(skb_put(skb,len), (rmdp->u.buffer & 0x00ffffff), len);
-
-
- /*
- * Notify the upper protocol layers that there is another packet
- * to handle
- *
- * netif_rx() always succeeds. see /net/inet/dev.c for more.
- */
-
- skb->protocol=eth_type_trans(skb,dev);
- netif_rx(skb); /* queue packet and mark it for processing */
-
- /*
- * Packet is queued and marked for processing so we
- * free our descriptor and update statistics
- */
-
- writeb(RX_OWN, &rmdp->u.s.status);
- dev->last_rx = jiffies;
- p->stats.rx_packets++;
- p->stats.rx_bytes += len;
-
-
- p->rmdnum++;
- p->rmdnum %= RMDNUM;
-
- rmdp = p->rmdhead + p->rmdnum;
- }
- }
-} /* End of SK_rxintr() */
-
-
-/*-
- * Function : SK_close
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/05/26
- *
- * Description : close gets called from dev_close() and should
- * deinstall the card (free_irq, mem etc).
- *
- * Parameters : I : struct net_device *dev - our device structure
- * Return Value : 0 - closed device driver
- * Errors : None
- * Globals : None
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-/* I have tried to set BOOT_ROM on and RAM off but then, after a 'ifconfig
- * down' the system stops. So I don't shut set card to init state.
- */
-
-static int SK_close(struct net_device *dev)
-{
-
- PRINTK(("## %s: SK_close(). CSR0: %#06x\n",
- SK_NAME, SK_read_reg(CSR0)));
-
- netif_stop_queue(dev); /* Transmitter busy */
-
- printk("%s: Shutting %s down CSR0 %#06x\n", dev->name, SK_NAME,
- (int) SK_read_reg(CSR0));
-
- SK_write_reg(CSR0, CSR0_STOP); /* STOP the LANCE */
-
- free_irq(dev->irq, dev); /* Free IRQ */
-
- return 0; /* always succeed */
-
-} /* End of SK_close() */
-
-
-/*-
- * Function : SK_get_stats
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/05/26
- *
- * Description : Return current status structure to upper layers.
- * It is called by sprintf_stats (dev.c).
- *
- * Parameters : I : struct net_device *dev - our device structure
- * Return Value : struct net_device_stats * - our current statistics
- * Errors : None
- * Side Effects : None
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-static struct net_device_stats *SK_get_stats(struct net_device *dev)
-{
-
- struct priv *p = netdev_priv(dev);
-
- PRINTK(("## %s: SK_get_stats(). CSR0: %#06x\n",
- SK_NAME, SK_read_reg(CSR0)));
-
- return &p->stats; /* Return Device status */
-
-} /* End of SK_get_stats() */
-
-
-/*-
- * Function : set_multicast_list
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/05/26
- *
- * Description : This function gets called when a program performs
- * a SIOCSIFFLAGS call. Ifconfig does this if you call
- * 'ifconfig [-]allmulti' which enables or disables the
- * Promiscuous mode.
- * Promiscuous mode is when the Network card accepts all
- * packets, not only the packets which match our MAC
- * Address. It is useful for writing a network monitor,
- * but it is also a security problem. You have to remember
- * that all information on the net is not encrypted.
- *
- * Parameters : I : struct net_device *dev - SK_G16 device Structure
- * Return Value : None
- * Errors : None
- * Globals : None
- * Update History :
- * YY/MM/DD uid Description
- * 95/10/18 ACox New multicast calling scheme
--*/
-
-
-/* Set or clear the multicast filter for SK_G16.
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
-
- if (dev->flags&IFF_PROMISC)
- {
- /* Reinitialize LANCE with MODE_PROM set */
- SK_lance_init(dev, MODE_PROM);
- }
- else if (dev->mc_count==0 && !(dev->flags&IFF_ALLMULTI))
- {
- /* Reinitialize LANCE without MODE_PROM */
- SK_lance_init(dev, MODE_NORMAL);
- }
- else
- {
- /* Multicast with logical address filter on */
- /* Reinitialize LANCE without MODE_PROM */
- SK_lance_init(dev, MODE_NORMAL);
-
- /* Not implemented yet. */
- }
-} /* End of set_multicast_list() */
-
-
-
-/*-
- * Function : SK_rom_addr
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/06/01
- *
- * Description : Try to find a Boot_ROM at all possible locations
- *
- * Parameters : None
- * Return Value : Address where Boot_ROM is
- * Errors : 0 - Did not find Boot_ROM
- * Globals : None
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-unsigned int __init SK_rom_addr(void)
-{
- int i,j;
- int rom_found = 0;
- unsigned int rom_location[] = SK_BOOT_ROM_LOCATIONS;
- unsigned char rom_id[] = SK_BOOT_ROM_ID;
- unsigned char test_byte;
-
- /* Autodetect Boot_ROM */
- PRINTK(("## %s: Autodetection of Boot_ROM\n", SK_NAME));
-
- for (i = 0; (rom_location[i] != 0) && (rom_found == 0); i++)
- {
-
- PRINTK(("## Trying ROM location %#08x", rom_location[i]));
-
- rom_found = 1;
- for (j = 0; j < 6; j++)
- {
- test_byte = readb(rom_location[i]+j);
- PRINTK((" %02x ", *test_byte));
-
- if(test_byte != rom_id[j])
- {
- rom_found = 0;
- }
- }
- PRINTK(("\n"));
- }
-
- if (rom_found == 1)
- {
- PRINTK(("## %s: Boot_ROM found at %#08x\n",
- SK_NAME, rom_location[(i-1)]));
-
- return (rom_location[--i]);
- }
- else
- {
- PRINTK(("%s: No Boot_ROM found\n", SK_NAME));
- return 0;
- }
-} /* End of SK_rom_addr() */
-
-
-
-/* LANCE access functions
- *
- * ! CSR1-3 can only be accessed when in CSR0 the STOP bit is set !
- */
-
-
-/*-
- * Function : SK_reset_board
- *
- * Author : Patrick J.D. Weichmann
- *
- * Date Created : 94/05/25
- *
- * Description : This function resets SK_G16 and all components, but
- * POS registers are not changed
- *
- * Parameters : None
- * Return Value : None
- * Errors : None
- * Globals : SK_RAM *board - SK_RAM structure pointer
- *
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-void SK_reset_board(void)
-{
- writeb(0x00, SK_PORT); /* Reset active */
- mdelay(5); /* Delay min 5ms */
- writeb(SK_RESET, SK_PORT); /* Set back to normal operation */
-
-} /* End of SK_reset_board() */
-
-
-/*-
- * Function : SK_set_RAP
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/05/25
- *
- * Description : Set LANCE Register Address Port to register
- * for later data transfer.
- *
- * Parameters : I : reg_number - which CSR to read/write from/to
- * Return Value : None
- * Errors : None
- * Globals : SK_RAM *board - SK_RAM structure pointer
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-void SK_set_RAP(int reg_number)
-{
- writew(reg_number, SK_IOREG);
- writeb(SK_RESET | SK_RAP | SK_WREG, SK_PORT);
- writeb(SK_DOIO, SK_IOCOM);
-
- while (readb(SK_PORT) & SK_IORUN)
- barrier();
-} /* End of SK_set_RAP() */
-
-
-/*-
- * Function : SK_read_reg
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/05/25
- *
- * Description : Set RAP and read data from a LANCE CSR register
- *
- * Parameters : I : reg_number - which CSR to read from
- * Return Value : Register contents
- * Errors : None
- * Globals : SK_RAM *board - SK_RAM structure pointer
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-int SK_read_reg(int reg_number)
-{
- SK_set_RAP(reg_number);
-
- writeb(SK_RESET | SK_RDATA | SK_RREG, SK_PORT);
- writeb(SK_DOIO, SK_IOCOM);
-
- while (readb(SK_PORT) & SK_IORUN)
- barrier();
- return (readw(SK_IOREG));
-
-} /* End of SK_read_reg() */
-
-
-/*-
- * Function : SK_rread_reg
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/05/28
- *
- * Description : Read data from preseted register.
- * This function requires that you know which
- * Register is actually set. Be aware that CSR1-3
- * can only be accessed when in CSR0 STOP is set.
- *
- * Return Value : Register contents
- * Errors : None
- * Globals : SK_RAM *board - SK_RAM structure pointer
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-int SK_rread_reg(void)
-{
- writeb(SK_RESET | SK_RDATA | SK_RREG, SK_PORT);
-
- writeb(SK_DOIO, SK_IOCOM);
-
- while (readb(SK_PORT) & SK_IORUN)
- barrier();
- return (readw(SK_IOREG));
-
-} /* End of SK_rread_reg() */
-
-
-/*-
- * Function : SK_write_reg
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/05/25
- *
- * Description : This function sets the RAP then fills in the
- * LANCE I/O Reg and starts Transfer to LANCE.
- * It waits until transfer has ended which is max. 7 ms
- * and then it returns.
- *
- * Parameters : I : reg_number - which CSR to write to
- * I : value - what value to fill into register
- * Return Value : None
- * Errors : None
- * Globals : SK_RAM *board - SK_RAM structure pointer
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-void SK_write_reg(int reg_number, int value)
-{
- SK_set_RAP(reg_number);
-
- writew(value, SK_IOREG);
- writeb(SK_RESET | SK_RDATA | SK_WREG, SK_PORT);
- writeb(SK_DOIO, SK_IOCOM);
-
- while (readb(SK_PORT) & SK_IORUN)
- barrier();
-} /* End of SK_write_reg */
-
-
-
-/*
- * Debugging functions
- * -------------------
- */
-
-/*-
- * Function : SK_print_pos
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/05/25
- *
- * Description : This function prints out the 4 POS (Programmable
- * Option Select) Registers. Used mainly to debug operation.
- *
- * Parameters : I : struct net_device *dev - SK_G16 device structure
- * I : char * - Text which will be printed as title
- * Return Value : None
- * Errors : None
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-void SK_print_pos(struct net_device *dev, char *text)
-{
- int ioaddr = dev->base_addr;
-
- unsigned char pos0 = inb(SK_POS0),
- pos1 = inb(SK_POS1),
- pos2 = inb(SK_POS2),
- pos3 = inb(SK_POS3),
- pos4 = inb(SK_POS4);
-
-
- printk("## %s: %s.\n"
- "## pos0=%#4x pos1=%#4x pos2=%#04x pos3=%#08x pos4=%#04x\n",
- SK_NAME, text, pos0, pos1, pos2, (pos3<<14), pos4);
-
-} /* End of SK_print_pos() */
-
-
-
-/*-
- * Function : SK_print_dev
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/05/25
- *
- * Description : This function simply prints out the important fields
- * of the device structure.
- *
- * Parameters : I : struct net_device *dev - SK_G16 device structure
- * I : char *text - Title for printing
- * Return Value : None
- * Errors : None
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-void SK_print_dev(struct net_device *dev, char *text)
-{
- if (dev == NULL)
- {
- printk("## %s: Device Structure. %s\n", SK_NAME, text);
- printk("## DEVICE == NULL\n");
- }
- else
- {
- printk("## %s: Device Structure. %s\n", SK_NAME, text);
- printk("## Device Name: %s Base Address: %#06lx IRQ: %d\n",
- dev->name, dev->base_addr, dev->irq);
-
- printk("## next device: %#08x init function: %#08x\n",
- (int) dev->next, (int) dev->init);
- }
-
-} /* End of SK_print_dev() */
-
-
-
-/*-
- * Function : SK_print_ram
- * Author : Patrick J.D. Weichmann
- * Date Created : 94/06/02
- *
- * Description : This function is used to check how are things set up
- * in the 16KB RAM. Also the pointers to the receive and
- * transmit descriptor rings and rx and tx buffers locations.
- * It contains a minor bug in printing, but has no effect to the values
- * only newlines are not correct.
- *
- * Parameters : I : struct net_device *dev - SK_G16 device structure
- * Return Value : None
- * Errors : None
- * Globals : None
- * Update History :
- * YY/MM/DD uid Description
--*/
-
-void __init SK_print_ram(struct net_device *dev)
-{
-
- int i;
- struct priv *p = netdev_priv(dev);
-
- printk("## %s: RAM Details.\n"
- "## RAM at %#08x tmdhead: %#08x rmdhead: %#08x initblock: %#08x\n",
- SK_NAME,
- (unsigned int) p->ram,
- (unsigned int) p->tmdhead,
- (unsigned int) p->rmdhead,
- (unsigned int) &(p->ram)->ib);
-
- printk("## ");
-
- for(i = 0; i < TMDNUM; i++)
- {
- if (!(i % 3)) /* Every third line do a newline */
- {
- printk("\n## ");
- }
- printk("tmdbufs%d: %#08x ", (i+1), (int) p->tmdbufs[i]);
- }
- printk("## ");
-
- for(i = 0; i < RMDNUM; i++)
- {
- if (!(i % 3)) /* Every third line do a newline */
- {
- printk("\n## ");
- }
- printk("rmdbufs%d: %#08x ", (i+1), (int) p->rmdbufs[i]);
- }
- printk("\n");
-
-} /* End of SK_print_ram() */
-
diff --git a/drivers/net/sk_g16.h b/drivers/net/sk_g16.h
deleted file mode 100644
index 0a5dc0908a0..00000000000
--- a/drivers/net/sk_g16.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*-
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * Module : sk_g16.h
- * Version : $Revision$
- *
- * Author : M.Hipp (mhipp@student.uni-tuebingen.de)
- * changes by : Patrick J.D. Weichmann
- *
- * Date Created : 94/05/25
- *
- * Description : In here are all necessary definitions of
- * the am7990 (LANCE) chip used for writing a
- * network device driver which uses this chip
- *
- * $Log$
--*/
-
-#ifndef SK_G16_H
-
-#define SK_G16_H
-
-
-/*
- * Control and Status Register 0 (CSR0) bit definitions
- *
- * (R=Readable) (W=Writeable) (S=Set on write) (C-Clear on write)
- *
- */
-
-#define CSR0_ERR 0x8000 /* Error summary (R) */
-#define CSR0_BABL 0x4000 /* Babble transmitter timeout error (RC) */
-#define CSR0_CERR 0x2000 /* Collision Error (RC) */
-#define CSR0_MISS 0x1000 /* Missed packet (RC) */
-#define CSR0_MERR 0x0800 /* Memory Error (RC) */
-#define CSR0_RINT 0x0400 /* Receiver Interrupt (RC) */
-#define CSR0_TINT 0x0200 /* Transmit Interrupt (RC) */
-#define CSR0_IDON 0x0100 /* Initialization Done (RC) */
-#define CSR0_INTR 0x0080 /* Interrupt Flag (R) */
-#define CSR0_INEA 0x0040 /* Interrupt Enable (RW) */
-#define CSR0_RXON 0x0020 /* Receiver on (R) */
-#define CSR0_TXON 0x0010 /* Transmitter on (R) */
-#define CSR0_TDMD 0x0008 /* Transmit Demand (RS) */
-#define CSR0_STOP 0x0004 /* Stop (RS) */
-#define CSR0_STRT 0x0002 /* Start (RS) */
-#define CSR0_INIT 0x0001 /* Initialize (RS) */
-
-#define CSR0_CLRALL 0x7f00 /* mask for all clearable bits */
-
-/*
- * Control and Status Register 3 (CSR3) bit definitions
- *
- */
-
-#define CSR3_BSWAP 0x0004 /* Byte Swap (RW) */
-#define CSR3_ACON 0x0002 /* ALE Control (RW) */
-#define CSR3_BCON 0x0001 /* Byte Control (RW) */
-
-/*
- * Initialization Block Mode operation Bit Definitions.
- */
-
-#define MODE_PROM 0x8000 /* Promiscuous Mode */
-#define MODE_INTL 0x0040 /* Internal Loopback */
-#define MODE_DRTY 0x0020 /* Disable Retry */
-#define MODE_COLL 0x0010 /* Force Collision */
-#define MODE_DTCR 0x0008 /* Disable Transmit CRC) */
-#define MODE_LOOP 0x0004 /* Loopback */
-#define MODE_DTX 0x0002 /* Disable the Transmitter */
-#define MODE_DRX 0x0001 /* Disable the Receiver */
-
-#define MODE_NORMAL 0x0000 /* Normal operation mode */
-
-/*
- * Receive message descriptor status bit definitions.
- */
-
-#define RX_OWN 0x80 /* Owner bit 0 = host, 1 = lance */
-#define RX_ERR 0x40 /* Error Summary */
-#define RX_FRAM 0x20 /* Framing Error */
-#define RX_OFLO 0x10 /* Overflow Error */
-#define RX_CRC 0x08 /* CRC Error */
-#define RX_BUFF 0x04 /* Buffer Error */
-#define RX_STP 0x02 /* Start of Packet */
-#define RX_ENP 0x01 /* End of Packet */
-
-
-/*
- * Transmit message descriptor status bit definitions.
- */
-
-#define TX_OWN 0x80 /* Owner bit 0 = host, 1 = lance */
-#define TX_ERR 0x40 /* Error Summary */
-#define TX_MORE 0x10 /* More the 1 retry needed to Xmit */
-#define TX_ONE 0x08 /* One retry needed to Xmit */
-#define TX_DEF 0x04 /* Deferred */
-#define TX_STP 0x02 /* Start of Packet */
-#define TX_ENP 0x01 /* End of Packet */
-
-/*
- * Transmit status (2) (valid if TX_ERR == 1)
- */
-
-#define TX_BUFF 0x8000 /* Buffering error (no ENP) */
-#define TX_UFLO 0x4000 /* Underflow (late memory) */
-#define TX_LCOL 0x1000 /* Late collision */
-#define TX_LCAR 0x0400 /* Loss of Carrier */
-#define TX_RTRY 0x0200 /* Failed after 16 retransmissions */
-#define TX_TDR 0x003f /* Time-domain-reflectometer-value */
-
-
-/*
- * Structures used for Communication with the LANCE
- */
-
-/* LANCE Initialize Block */
-
-struct init_block
-{
- unsigned short mode; /* Mode Register */
- unsigned char paddr[6]; /* Physical Address (MAC) */
- unsigned char laddr[8]; /* Logical Filter Address (not used) */
- unsigned int rdrp; /* Receive Descriptor Ring pointer */
- unsigned int tdrp; /* Transmit Descriptor Ring pointer */
-};
-
-
-/* Receive Message Descriptor Entry */
-
-struct rmd
-{
- union
- {
- unsigned long buffer; /* Address of buffer */
- struct
- {
- unsigned char unused[3];
- unsigned volatile char status; /* Status Bits */
- } s;
- } u;
- volatile short blen; /* Buffer Length (two's complement) */
- unsigned short mlen; /* Message Byte Count */
-};
-
-
-/* Transmit Message Descriptor Entry */
-
-struct tmd
-{
- union
- {
- unsigned long buffer; /* Address of buffer */
- struct
- {
- unsigned char unused[3];
- unsigned volatile char status; /* Status Bits */
- } s;
- } u;
- unsigned short blen; /* Buffer Length (two's complement) */
- unsigned volatile short status2; /* Error Status Bits */
-};
-
-#endif /* End of SK_G16_H */
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
new file mode 100644
index 00000000000..30e8d589d16
--- /dev/null
+++ b/drivers/net/skge.c
@@ -0,0 +1,3386 @@
+/*
+ * New driver for Marvell Yukon chipset and SysKonnect Gigabit
+ * Ethernet adapters. Based on earlier sk98lin, e100 and
+ * FreeBSD if_sk drivers.
+ *
+ * This driver intentionally does not support all the features
+ * of the original driver such as link fail-over and link management because
+ * those should be done at higher levels.
+ *
+ * Copyright (C) 2004, Stephen Hemminger <shemminger@osdl.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/delay.h>
+#include <linux/crc32.h>
+#include <linux/dma-mapping.h>
+#include <asm/irq.h>
+
+#include "skge.h"
+
+#define DRV_NAME "skge"
+#define DRV_VERSION "0.6"
+#define PFX DRV_NAME " "
+
+#define DEFAULT_TX_RING_SIZE 128
+#define DEFAULT_RX_RING_SIZE 512
+#define MAX_TX_RING_SIZE 1024
+#define MAX_RX_RING_SIZE 4096
+#define PHY_RETRIES 1000
+#define ETH_JUMBO_MTU 9000
+#define TX_WATCHDOG (5 * HZ)
+#define NAPI_WEIGHT 64
+#define BLINK_HZ (HZ/4)
+#define LINK_POLL_HZ (HZ/10)
+
+MODULE_DESCRIPTION("SysKonnect Gigabit Ethernet driver");
+MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+static const u32 default_msg
+ = NETIF_MSG_DRV| NETIF_MSG_PROBE| NETIF_MSG_LINK
+ | NETIF_MSG_IFUP| NETIF_MSG_IFDOWN;
+
+static int debug = -1; /* defaults above */
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+static const struct pci_device_id skge_id_table[] = {
+ { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940B,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_SYSKONNECT, 0x9E00, /* SK-9Exx */
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_MARVELL, 0x4320, /* Gigabit Ethernet Controller */
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_MARVELL, 0x5005, /* Marvell (11ab), Belkin */
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1032,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1064,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, skge_id_table);
+
+static int skge_up(struct net_device *dev);
+static int skge_down(struct net_device *dev);
+static void skge_tx_clean(struct skge_port *skge);
+static void skge_xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val);
+static void skge_gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val);
+static void genesis_get_stats(struct skge_port *skge, u64 *data);
+static void yukon_get_stats(struct skge_port *skge, u64 *data);
+static void yukon_init(struct skge_hw *hw, int port);
+static void yukon_reset(struct skge_hw *hw, int port);
+static void genesis_mac_init(struct skge_hw *hw, int port);
+static void genesis_reset(struct skge_hw *hw, int port);
+
+static const int txqaddr[] = { Q_XA1, Q_XA2 };
+static const int rxqaddr[] = { Q_R1, Q_R2 };
+static const u32 rxirqmask[] = { IS_R1_F, IS_R2_F };
+static const u32 txirqmask[] = { IS_XA1_F, IS_XA2_F };
+
+/* Don't need to look at whole 16K.
+ * last interesting register is descriptor poll timer.
+ */
+#define SKGE_REGS_LEN (29*128)
+
+static int skge_get_regs_len(struct net_device *dev)
+{
+ return SKGE_REGS_LEN;
+}
+
+/*
+ * Returns copy of control register region
+ * I/O region is divided into banks and certain regions are unreadable
+ */
+static void skge_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *p)
+{
+ const struct skge_port *skge = netdev_priv(dev);
+ unsigned long offs;
+ const void __iomem *io = skge->hw->regs;
+ static const unsigned long bankmap
+ = (1<<0) | (1<<2) | (1<<8) | (1<<9)
+ | (1<<12) | (1<<13) | (1<<14) | (1<<15) | (1<<16)
+ | (1<<17) | (1<<20) | (1<<21) | (1<<22) | (1<<23)
+ | (1<<24) | (1<<25) | (1<<26) | (1<<27) | (1<<28);
+
+ regs->version = 1;
+ for (offs = 0; offs < regs->len; offs += 128) {
+ u32 len = min_t(u32, 128, regs->len - offs);
+
+ if (bankmap & (1<<(offs/128)))
+ memcpy_fromio(p + offs, io + offs, len);
+ else
+ memset(p + offs, 0, len);
+ }
+}
+
+/* Wake on Lan only supported on Yukon chps with rev 1 or above */
+static int wol_supported(const struct skge_hw *hw)
+{
+ return !((hw->chip_id == CHIP_ID_GENESIS ||
+ (hw->chip_id == CHIP_ID_YUKON && chip_rev(hw) == 0)));
+}
+
+static void skge_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct skge_port *skge = netdev_priv(dev);
+
+ wol->supported = wol_supported(skge->hw) ? WAKE_MAGIC : 0;
+ wol->wolopts = skge->wol ? WAKE_MAGIC : 0;
+}
+
+static int skge_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct skge_port *skge = netdev_priv(dev);
+ struct skge_hw *hw = skge->hw;
+
+ if(wol->wolopts != WAKE_MAGIC && wol->wolopts != 0)
+ return -EOPNOTSUPP;
+
+ if (wol->wolopts == WAKE_MAGIC && !wol_supported(hw))
+ return -EOPNOTSUPP;
+
+ skge->wol = wol->wolopts == WAKE_MAGIC;
+
+ if (skge->wol) {
+ memcpy_toio(hw->regs + WOL_MAC_ADDR, dev->dev_addr, ETH_ALEN);
+
+ skge_write16(hw, WOL_CTRL_STAT,
+ WOL_CTL_ENA_PME_ON_MAGIC_PKT |
+ WOL_CTL_ENA_MAGIC_PKT_UNIT);
+ } else
+ skge_write16(hw, WOL_CTRL_STAT, WOL_CTL_DEFAULT);
+
+ return 0;
+}
+
+
+static int skge_get_settings(struct net_device *dev,
+ struct ethtool_cmd *ecmd)
+{
+ struct skge_port *skge = netdev_priv(dev);
+ struct skge_hw *hw = skge->hw;
+
+ ecmd->transceiver = XCVR_INTERNAL;
+
+ if (iscopper(hw)) {
+ if (hw->chip_id == CHIP_ID_GENESIS)
+ ecmd->supported = SUPPORTED_1000baseT_Full
+ | SUPPORTED_1000baseT_Half
+ | SUPPORTED_Autoneg | SUPPORTED_TP;
+ else {
+ ecmd->supported = SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full
+ | SUPPORTED_1000baseT_Half
+ | SUPPORTED_1000baseT_Full
+ | SUPPORTED_Autoneg| SUPPORTED_TP;
+
+ if (hw->chip_id == CHIP_ID_YUKON)
+ ecmd->supported &= ~SUPPORTED_1000baseT_Half;
+
+ else if (hw->chip_id == CHIP_ID_YUKON_FE)
+ ecmd->supported &= ~(SUPPORTED_1000baseT_Half
+ | SUPPORTED_1000baseT_Full);
+ }
+
+ ecmd->port = PORT_TP;
+ ecmd->phy_address = hw->phy_addr;
+ } else {
+ ecmd->supported = SUPPORTED_1000baseT_Full
+ | SUPPORTED_FIBRE
+ | SUPPORTED_Autoneg;
+
+ ecmd->port = PORT_FIBRE;
+ }
+
+ ecmd->advertising = skge->advertising;
+ ecmd->autoneg = skge->autoneg;
+ ecmd->speed = skge->speed;
+ ecmd->duplex = skge->duplex;
+ return 0;
+}
+
+static u32 skge_modes(const struct skge_hw *hw)
+{
+ u32 modes = ADVERTISED_Autoneg
+ | ADVERTISED_1000baseT_Full | ADVERTISED_1000baseT_Half
+ | ADVERTISED_100baseT_Full | ADVERTISED_100baseT_Half
+ | ADVERTISED_10baseT_Full | ADVERTISED_10baseT_Half;
+
+ if (iscopper(hw)) {
+ modes |= ADVERTISED_TP;
+ switch(hw->chip_id) {
+ case CHIP_ID_GENESIS:
+ modes &= ~(ADVERTISED_100baseT_Full
+ | ADVERTISED_100baseT_Half
+ | ADVERTISED_10baseT_Full
+ | ADVERTISED_10baseT_Half);
+ break;
+
+ case CHIP_ID_YUKON:
+ modes &= ~ADVERTISED_1000baseT_Half;
+ break;
+
+ case CHIP_ID_YUKON_FE:
+ modes &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
+ break;
+ }
+ } else {
+ modes |= ADVERTISED_FIBRE;
+ modes &= ~ADVERTISED_1000baseT_Half;
+ }
+ return modes;
+}
+
+static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct skge_port *skge = netdev_priv(dev);
+ const struct skge_hw *hw = skge->hw;
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ if (ecmd->advertising & skge_modes(hw))
+ return -EINVAL;
+ } else {
+ switch(ecmd->speed) {
+ case SPEED_1000:
+ if (hw->chip_id == CHIP_ID_YUKON_FE)
+ return -EINVAL;
+ break;
+ case SPEED_100:
+ case SPEED_10:
+ if (iscopper(hw) || hw->chip_id == CHIP_ID_GENESIS)
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ skge->autoneg = ecmd->autoneg;
+ skge->speed = ecmd->speed;
+ skge->duplex = ecmd->duplex;
+ skge->advertising = ecmd->advertising;
+
+ if (netif_running(dev)) {
+ skge_down(dev);
+ skge_up(dev);
+ }
+ return (0);
+}
+
+static void skge_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct skge_port *skge = netdev_priv(dev);
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->fw_version, "N/A");
+ strcpy(info->bus_info, pci_name(skge->hw->pdev));
+}
+
+static const struct skge_stat {
+ char name[ETH_GSTRING_LEN];
+ u16 xmac_offset;
+ u16 gma_offset;
+} skge_stats[] = {
+ { "tx_bytes", XM_TXO_OK_HI, GM_TXO_OK_HI },
+ { "rx_bytes", XM_RXO_OK_HI, GM_RXO_OK_HI },
+
+ { "tx_broadcast", XM_TXF_BC_OK, GM_TXF_BC_OK },
+ { "rx_broadcast", XM_RXF_BC_OK, GM_RXF_BC_OK },
+ { "tx_multicast", XM_TXF_MC_OK, GM_TXF_MC_OK },
+ { "rx_multicast", XM_RXF_MC_OK, GM_RXF_MC_OK },
+ { "tx_unicast", XM_TXF_UC_OK, GM_TXF_UC_OK },
+ { "rx_unicast", XM_RXF_UC_OK, GM_RXF_UC_OK },
+ { "tx_mac_pause", XM_TXF_MPAUSE, GM_TXF_MPAUSE },
+ { "rx_mac_pause", XM_RXF_MPAUSE, GM_RXF_MPAUSE },
+
+ { "collisions", XM_TXF_SNG_COL, GM_TXF_SNG_COL },
+ { "multi_collisions", XM_TXF_MUL_COL, GM_TXF_MUL_COL },
+ { "aborted", XM_TXF_ABO_COL, GM_TXF_ABO_COL },
+ { "late_collision", XM_TXF_LAT_COL, GM_TXF_LAT_COL },
+ { "fifo_underrun", XM_TXE_FIFO_UR, GM_TXE_FIFO_UR },
+ { "fifo_overflow", XM_RXE_FIFO_OV, GM_RXE_FIFO_OV },
+
+ { "rx_toolong", XM_RXF_LNG_ERR, GM_RXF_LNG_ERR },
+ { "rx_jabber", XM_RXF_JAB_PKT, GM_RXF_JAB_PKT },
+ { "rx_runt", XM_RXE_RUNT, GM_RXE_FRAG },
+ { "rx_too_long", XM_RXF_LNG_ERR, GM_RXF_LNG_ERR },
+ { "rx_fcs_error", XM_RXF_FCS_ERR, GM_RXF_FCS_ERR },
+};
+
+static int skge_get_stats_count(struct net_device *dev)
+{
+ return ARRAY_SIZE(skge_stats);
+}
+
+static void skge_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct skge_port *skge = netdev_priv(dev);
+
+ if (skge->hw->chip_id == CHIP_ID_GENESIS)
+ genesis_get_stats(skge, data);
+ else
+ yukon_get_stats(skge, data);
+}
+
+/* Use hardware MIB variables for critical path statistics and
+ * transmit feedback not reported at interrupt.
+ * Other errors are accounted for in interrupt handler.
+ */
+static struct net_device_stats *skge_get_stats(struct net_device *dev)
+{
+ struct skge_port *skge = netdev_priv(dev);
+ u64 data[ARRAY_SIZE(skge_stats)];
+
+ if (skge->hw->chip_id == CHIP_ID_GENESIS)
+ genesis_get_stats(skge, data);
+ else
+ yukon_get_stats(skge, data);
+
+ skge->net_stats.tx_bytes = data[0];
+ skge->net_stats.rx_bytes = data[1];
+ skge->net_stats.tx_packets = data[2] + data[4] + data[6];
+ skge->net_stats.rx_packets = data[3] + data[5] + data[7];
+ skge->net_stats.multicast = data[5] + data[7];
+ skge->net_stats.collisions = data[10];
+ skge->net_stats.tx_aborted_errors = data[12];
+
+ return &skge->net_stats;
+}
+
+static void skge_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ int i;
+
+ switch(stringset) {
+ case ETH_SS_STATS:
+ for (i = 0; i < ARRAY_SIZE(skge_stats); i++)
+ memcpy(data + i * ETH_GSTRING_LEN,
+ skge_stats[i].name, ETH_GSTRING_LEN);
+ break;
+ }
+}
+
+static void skge_get_ring_param(struct net_device *dev,
+ struct ethtool_ringparam *p)
+{
+ struct skge_port *skge = netdev_priv(dev);
+
+ p->rx_max_pending = MAX_RX_RING_SIZE;
+ p->tx_max_pending = MAX_TX_RING_SIZE;
+ p->rx_mini_max_pending = 0;
+ p->rx_jumbo_max_pending = 0;
+
+ p->rx_pending = skge->rx_ring.count;
+ p->tx_pending = skge->tx_ring.count;
+ p->rx_mini_pending = 0;
+ p->rx_jumbo_pending = 0;
+}
+
+static int skge_set_ring_param(struct net_device *dev,
+ struct ethtool_ringparam *p)
+{
+ struct skge_port *skge = netdev_priv(dev);
+
+ if (p->rx_pending == 0 || p->rx_pending > MAX_RX_RING_SIZE ||
+ p->tx_pending == 0 || p->tx_pending > MAX_TX_RING_SIZE)
+ return -EINVAL;
+
+ skge->rx_ring.count = p->rx_pending;
+ skge->tx_ring.count = p->tx_pending;
+
+ if (netif_running(dev)) {
+ skge_down(dev);
+ skge_up(dev);
+ }
+
+ return 0;
+}
+
+static u32 skge_get_msglevel(struct net_device *netdev)
+{
+ struct skge_port *skge = netdev_priv(netdev);
+ return skge->msg_enable;
+}
+
+static void skge_set_msglevel(struct net_device *netdev, u32 value)
+{
+ struct skge_port *skge = netdev_priv(netdev);
+ skge->msg_enable = value;
+}
+
+static int skge_nway_reset(struct net_device *dev)
+{
+ struct skge_port *skge = netdev_priv(dev);
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+
+ if (skge->autoneg != AUTONEG_ENABLE || !netif_running(dev))
+ return -EINVAL;
+
+ spin_lock_bh(&hw->phy_lock);
+ if (hw->chip_id == CHIP_ID_GENESIS) {
+ genesis_reset(hw, port);
+ genesis_mac_init(hw, port);
+ } else {
+ yukon_reset(hw, port);
+ yukon_init(hw, port);
+ }
+ spin_unlock_bh(&hw->phy_lock);
+ return 0;
+}
+
+static int skge_set_sg(struct net_device *dev, u32 data)
+{
+ struct skge_port *skge = netdev_priv(dev);
+ struct skge_hw *hw = skge->hw;
+
+ if (hw->chip_id == CHIP_ID_GENESIS && data)
+ return -EOPNOTSUPP;
+ return ethtool_op_set_sg(dev, data);
+}
+
+static int skge_set_tx_csum(struct net_device *dev, u32 data)
+{
+ struct skge_port *skge = netdev_priv(dev);
+ struct skge_hw *hw = skge->hw;
+
+ if (hw->chip_id == CHIP_ID_GENESIS && data)
+ return -EOPNOTSUPP;
+
+ return ethtool_op_set_tx_csum(dev, data);
+}
+
+static u32 skge_get_rx_csum(struct net_device *dev)
+{
+ struct skge_port *skge = netdev_priv(dev);
+
+ return skge->rx_csum;
+}
+
+/* Only Yukon supports checksum offload. */
+static int skge_set_rx_csum(struct net_device *dev, u32 data)
+{
+ struct skge_port *skge = netdev_priv(dev);
+
+ if (skge->hw->chip_id == CHIP_ID_GENESIS && data)
+ return -EOPNOTSUPP;
+
+ skge->rx_csum = data;
+ return 0;
+}
+
+/* Only Yukon II supports TSO (not implemented yet) */
+static int skge_set_tso(struct net_device *dev, u32 data)
+{
+ if (data)
+ return -EOPNOTSUPP;
+ return 0;
+}
+
+static void skge_get_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *ecmd)
+{
+ struct skge_port *skge = netdev_priv(dev);
+
+ ecmd->tx_pause = (skge->flow_control == FLOW_MODE_LOC_SEND)
+ || (skge->flow_control == FLOW_MODE_SYMMETRIC);
+ ecmd->rx_pause = (skge->flow_control == FLOW_MODE_REM_SEND)
+ || (skge->flow_control == FLOW_MODE_SYMMETRIC);
+
+ ecmd->autoneg = skge->autoneg;
+}
+
+static int skge_set_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *ecmd)
+{
+ struct skge_port *skge = netdev_priv(dev);
+
+ skge->autoneg = ecmd->autoneg;
+ if (ecmd->rx_pause && ecmd->tx_pause)
+ skge->flow_control = FLOW_MODE_SYMMETRIC;
+ else if(ecmd->rx_pause && !ecmd->tx_pause)
+ skge->flow_control = FLOW_MODE_REM_SEND;
+ else if(!ecmd->rx_pause && ecmd->tx_pause)
+ skge->flow_control = FLOW_MODE_LOC_SEND;
+ else
+ skge->flow_control = FLOW_MODE_NONE;
+
+ if (netif_running(dev)) {
+ skge_down(dev);
+ skge_up(dev);
+ }
+ return 0;
+}
+
+/* Chip internal frequency for clock calculations */
+static inline u32 hwkhz(const struct skge_hw *hw)
+{
+ if (hw->chip_id == CHIP_ID_GENESIS)
+ return 53215; /* or: 53.125 MHz */
+ else if (hw->chip_id == CHIP_ID_YUKON_EC)
+ return 125000; /* or: 125.000 MHz */
+ else
+ return 78215; /* or: 78.125 MHz */
+}
+
+/* Chip hz to microseconds */
+static inline u32 skge_clk2usec(const struct skge_hw *hw, u32 ticks)
+{
+ return (ticks * 1000) / hwkhz(hw);
+}
+
+/* Microseconds to chip hz */
+static inline u32 skge_usecs2clk(const struct skge_hw *hw, u32 usec)
+{
+ return hwkhz(hw) * usec / 1000;
+}
+
+static int skge_get_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ecmd)
+{
+ struct skge_port *skge = netdev_priv(dev);
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+
+ ecmd->rx_coalesce_usecs = 0;
+ ecmd->tx_coalesce_usecs = 0;
+
+ if (skge_read32(hw, B2_IRQM_CTRL) & TIM_START) {
+ u32 delay = skge_clk2usec(hw, skge_read32(hw, B2_IRQM_INI));
+ u32 msk = skge_read32(hw, B2_IRQM_MSK);
+
+ if (msk & rxirqmask[port])
+ ecmd->rx_coalesce_usecs = delay;
+ if (msk & txirqmask[port])
+ ecmd->tx_coalesce_usecs = delay;
+ }
+
+ return 0;
+}
+
+/* Note: interrupt timer is per board, but can turn on/off per port */
+static int skge_set_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ecmd)
+{
+ struct skge_port *skge = netdev_priv(dev);
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+ u32 msk = skge_read32(hw, B2_IRQM_MSK);
+ u32 delay = 25;
+
+ if (ecmd->rx_coalesce_usecs == 0)
+ msk &= ~rxirqmask[port];
+ else if (ecmd->rx_coalesce_usecs < 25 ||
+ ecmd->rx_coalesce_usecs > 33333)
+ return -EINVAL;
+ else {
+ msk |= rxirqmask[port];
+ delay = ecmd->rx_coalesce_usecs;
+ }
+
+ if (ecmd->tx_coalesce_usecs == 0)
+ msk &= ~txirqmask[port];
+ else if (ecmd->tx_coalesce_usecs < 25 ||
+ ecmd->tx_coalesce_usecs > 33333)
+ return -EINVAL;
+ else {
+ msk |= txirqmask[port];
+ delay = min(delay, ecmd->rx_coalesce_usecs);
+ }
+
+ skge_write32(hw, B2_IRQM_MSK, msk);
+ if (msk == 0)
+ skge_write32(hw, B2_IRQM_CTRL, TIM_STOP);
+ else {
+ skge_write32(hw, B2_IRQM_INI, skge_usecs2clk(hw, delay));
+ skge_write32(hw, B2_IRQM_CTRL, TIM_START);
+ }
+ return 0;
+}
+
+static void skge_led_on(struct skge_hw *hw, int port)
+{
+ if (hw->chip_id == CHIP_ID_GENESIS) {
+ skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_ON);
+ skge_write8(hw, B0_LED, LED_STAT_ON);
+
+ skge_write8(hw, SKGEMAC_REG(port, RX_LED_TST), LED_T_ON);
+ skge_write32(hw, SKGEMAC_REG(port, RX_LED_VAL), 100);
+ skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_START);
+
+ switch (hw->phy_type) {
+ case SK_PHY_BCOM:
+ skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL,
+ PHY_B_PEC_LED_ON);
+ break;
+ case SK_PHY_LONE:
+ skge_xm_phy_write(hw, port, PHY_LONE_LED_CFG,
+ 0x0800);
+ break;
+ default:
+ skge_write8(hw, SKGEMAC_REG(port, TX_LED_TST), LED_T_ON);
+ skge_write32(hw, SKGEMAC_REG(port, TX_LED_VAL), 100);
+ skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_START);
+ }
+ } else {
+ skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+ skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+ PHY_M_LED_MO_DUP(MO_LED_ON) |
+ PHY_M_LED_MO_10(MO_LED_ON) |
+ PHY_M_LED_MO_100(MO_LED_ON) |
+ PHY_M_LED_MO_1000(MO_LED_ON) |
+ PHY_M_LED_MO_RX(MO_LED_ON));
+ }
+}
+
+static void skge_led_off(struct skge_hw *hw, int port)
+{
+ if (hw->chip_id == CHIP_ID_GENESIS) {
+ skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_OFF);
+ skge_write8(hw, B0_LED, LED_STAT_OFF);
+
+ skge_write32(hw, SKGEMAC_REG(port, RX_LED_VAL), 0);
+ skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_T_OFF);
+
+ switch (hw->phy_type) {
+ case SK_PHY_BCOM:
+ skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL,
+ PHY_B_PEC_LED_OFF);
+ break;
+ case SK_PHY_LONE:
+ skge_xm_phy_write(hw, port, PHY_LONE_LED_CFG,
+ PHY_L_LC_LEDT);
+ break;
+ default:
+ skge_write32(hw, SKGEMAC_REG(port, TX_LED_VAL), 0);
+ skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_T_OFF);
+ }
+ } else {
+ skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+ skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+ PHY_M_LED_MO_DUP(MO_LED_OFF) |
+ PHY_M_LED_MO_10(MO_LED_OFF) |
+ PHY_M_LED_MO_100(MO_LED_OFF) |
+ PHY_M_LED_MO_1000(MO_LED_OFF) |
+ PHY_M_LED_MO_RX(MO_LED_OFF));
+ }
+}
+
+static void skge_blink_timer(unsigned long data)
+{
+ struct skge_port *skge = (struct skge_port *) data;
+ struct skge_hw *hw = skge->hw;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->phy_lock, flags);
+ if (skge->blink_on)
+ skge_led_on(hw, skge->port);
+ else
+ skge_led_off(hw, skge->port);
+ spin_unlock_irqrestore(&hw->phy_lock, flags);
+
+ skge->blink_on = !skge->blink_on;
+ mod_timer(&skge->led_blink, jiffies + BLINK_HZ);
+}
+
+/* blink LED's for finding board */
+static int skge_phys_id(struct net_device *dev, u32 data)
+{
+ struct skge_port *skge = netdev_priv(dev);
+
+ if(!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
+ data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
+
+ /* start blinking */
+ skge->blink_on = 1;
+ mod_timer(&skge->led_blink, jiffies+1);
+
+ msleep_interruptible(data * 1000);
+ del_timer_sync(&skge->led_blink);
+
+ skge_led_off(skge->hw, skge->port);
+
+ return 0;
+}
+
+static struct ethtool_ops skge_ethtool_ops = {
+ .get_settings = skge_get_settings,
+ .set_settings = skge_set_settings,
+ .get_drvinfo = skge_get_drvinfo,
+ .get_regs_len = skge_get_regs_len,
+ .get_regs = skge_get_regs,
+ .get_wol = skge_get_wol,
+ .set_wol = skge_set_wol,
+ .get_msglevel = skge_get_msglevel,
+ .set_msglevel = skge_set_msglevel,
+ .nway_reset = skge_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_ringparam = skge_get_ring_param,
+ .set_ringparam = skge_set_ring_param,
+ .get_pauseparam = skge_get_pauseparam,
+ .set_pauseparam = skge_set_pauseparam,
+ .get_coalesce = skge_get_coalesce,
+ .set_coalesce = skge_set_coalesce,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = skge_set_tso,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = skge_set_sg,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = skge_set_tx_csum,
+ .get_rx_csum = skge_get_rx_csum,
+ .set_rx_csum = skge_set_rx_csum,
+ .get_strings = skge_get_strings,
+ .phys_id = skge_phys_id,
+ .get_stats_count = skge_get_stats_count,
+ .get_ethtool_stats = skge_get_ethtool_stats,
+};
+
+/*
+ * Allocate ring elements and chain them together
+ * One-to-one association of board descriptors with ring elements
+ */
+static int skge_ring_alloc(struct skge_ring *ring, void *vaddr, u64 base)
+{
+ struct skge_tx_desc *d;
+ struct skge_element *e;
+ int i;
+
+ ring->start = kmalloc(sizeof(*e)*ring->count, GFP_KERNEL);
+ if (!ring->start)
+ return -ENOMEM;
+
+ for (i = 0, e = ring->start, d = vaddr; i < ring->count; i++, e++, d++) {
+ e->desc = d;
+ if (i == ring->count - 1) {
+ e->next = ring->start;
+ d->next_offset = base;
+ } else {
+ e->next = e + 1;
+ d->next_offset = base + (i+1) * sizeof(*d);
+ }
+ }
+ ring->to_use = ring->to_clean = ring->start;
+
+ return 0;
+}
+
+/* Setup buffer for receiving */
+static inline int skge_rx_alloc(struct skge_port *skge,
+ struct skge_element *e)
+{
+ unsigned long bufsize = skge->netdev->mtu + ETH_HLEN; /* VLAN? */
+ struct skge_rx_desc *rd = e->desc;
+ struct sk_buff *skb;
+ u64 map;
+
+ skb = dev_alloc_skb(bufsize + NET_IP_ALIGN);
+ if (unlikely(!skb)) {
+ printk(KERN_DEBUG PFX "%s: out of memory for receive\n",
+ skge->netdev->name);
+ return -ENOMEM;
+ }
+
+ skb->dev = skge->netdev;
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ map = pci_map_single(skge->hw->pdev, skb->data, bufsize,
+ PCI_DMA_FROMDEVICE);
+
+ rd->dma_lo = map;
+ rd->dma_hi = map >> 32;
+ e->skb = skb;
+ rd->csum1_start = ETH_HLEN;
+ rd->csum2_start = ETH_HLEN;
+ rd->csum1 = 0;
+ rd->csum2 = 0;
+
+ wmb();
+
+ rd->control = BMU_OWN | BMU_STF | BMU_IRQ_EOF | BMU_TCP_CHECK | bufsize;
+ pci_unmap_addr_set(e, mapaddr, map);
+ pci_unmap_len_set(e, maplen, bufsize);
+ return 0;
+}
+
+/* Free all unused buffers in receive ring, assumes receiver stopped */
+static void skge_rx_clean(struct skge_port *skge)
+{
+ struct skge_hw *hw = skge->hw;
+ struct skge_ring *ring = &skge->rx_ring;
+ struct skge_element *e;
+
+ for (e = ring->to_clean; e != ring->to_use; e = e->next) {
+ struct skge_rx_desc *rd = e->desc;
+ rd->control = 0;
+
+ pci_unmap_single(hw->pdev,
+ pci_unmap_addr(e, mapaddr),
+ pci_unmap_len(e, maplen),
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(e->skb);
+ e->skb = NULL;
+ }
+ ring->to_clean = e;
+}
+
+/* Allocate buffers for receive ring
+ * For receive: to_use is refill location
+ * to_clean is next received frame.
+ *
+ * if (to_use == to_clean)
+ * then ring all frames in ring need buffers
+ * if (to_use->next == to_clean)
+ * then ring all frames in ring have buffers
+ */
+static int skge_rx_fill(struct skge_port *skge)
+{
+ struct skge_ring *ring = &skge->rx_ring;
+ struct skge_element *e;
+ int ret = 0;
+
+ for (e = ring->to_use; e->next != ring->to_clean; e = e->next) {
+ if (skge_rx_alloc(skge, e)) {
+ ret = 1;
+ break;
+ }
+
+ }
+ ring->to_use = e;
+
+ return ret;
+}
+
+static void skge_link_up(struct skge_port *skge)
+{
+ netif_carrier_on(skge->netdev);
+ if (skge->tx_avail > MAX_SKB_FRAGS + 1)
+ netif_wake_queue(skge->netdev);
+
+ if (netif_msg_link(skge))
+ printk(KERN_INFO PFX
+ "%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
+ skge->netdev->name, skge->speed,
+ skge->duplex == DUPLEX_FULL ? "full" : "half",
+ (skge->flow_control == FLOW_MODE_NONE) ? "none" :
+ (skge->flow_control == FLOW_MODE_LOC_SEND) ? "tx only" :
+ (skge->flow_control == FLOW_MODE_REM_SEND) ? "rx only" :
+ (skge->flow_control == FLOW_MODE_SYMMETRIC) ? "tx and rx" :
+ "unknown");
+}
+
+static void skge_link_down(struct skge_port *skge)
+{
+ netif_carrier_off(skge->netdev);
+ netif_stop_queue(skge->netdev);
+
+ if (netif_msg_link(skge))
+ printk(KERN_INFO PFX "%s: Link is down.\n", skge->netdev->name);
+}
+
+static u16 skge_xm_phy_read(struct skge_hw *hw, int port, u16 reg)
+{
+ int i;
+ u16 v;
+
+ skge_xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr);
+ v = skge_xm_read16(hw, port, XM_PHY_DATA);
+ if (hw->phy_type != SK_PHY_XMAC) {
+ for (i = 0; i < PHY_RETRIES; i++) {
+ udelay(1);
+ if (skge_xm_read16(hw, port, XM_MMU_CMD)
+ & XM_MMU_PHY_RDY)
+ goto ready;
+ }
+
+ printk(KERN_WARNING PFX "%s: phy read timed out\n",
+ hw->dev[port]->name);
+ return 0;
+ ready:
+ v = skge_xm_read16(hw, port, XM_PHY_DATA);
+ }
+
+ return v;
+}
+
+static void skge_xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val)
+{
+ int i;
+
+ skge_xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr);
+ for (i = 0; i < PHY_RETRIES; i++) {
+ if (!(skge_xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY))
+ goto ready;
+ cpu_relax();
+ }
+ printk(KERN_WARNING PFX "%s: phy write failed to come ready\n",
+ hw->dev[port]->name);
+
+
+ ready:
+ skge_xm_write16(hw, port, XM_PHY_DATA, val);
+ for (i = 0; i < PHY_RETRIES; i++) {
+ udelay(1);
+ if (!(skge_xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY))
+ return;
+ }
+ printk(KERN_WARNING PFX "%s: phy write timed out\n",
+ hw->dev[port]->name);
+}
+
+static void genesis_init(struct skge_hw *hw)
+{
+ /* set blink source counter */
+ skge_write32(hw, B2_BSC_INI, (SK_BLK_DUR * SK_FACT_53) / 100);
+ skge_write8(hw, B2_BSC_CTRL, BSC_START);
+
+ /* configure mac arbiter */
+ skge_write16(hw, B3_MA_TO_CTRL, MA_RST_CLR);
+
+ /* configure mac arbiter timeout values */
+ skge_write8(hw, B3_MA_TOINI_RX1, SK_MAC_TO_53);
+ skge_write8(hw, B3_MA_TOINI_RX2, SK_MAC_TO_53);
+ skge_write8(hw, B3_MA_TOINI_TX1, SK_MAC_TO_53);
+ skge_write8(hw, B3_MA_TOINI_TX2, SK_MAC_TO_53);
+
+ skge_write8(hw, B3_MA_RCINI_RX1, 0);
+ skge_write8(hw, B3_MA_RCINI_RX2, 0);
+ skge_write8(hw, B3_MA_RCINI_TX1, 0);
+ skge_write8(hw, B3_MA_RCINI_TX2, 0);
+
+ /* configure packet arbiter timeout */
+ skge_write16(hw, B3_PA_CTRL, PA_RST_CLR);
+ skge_write16(hw, B3_PA_TOINI_RX1, SK_PKT_TO_MAX);
+ skge_write16(hw, B3_PA_TOINI_TX1, SK_PKT_TO_MAX);
+ skge_write16(hw, B3_PA_TOINI_RX2, SK_PKT_TO_MAX);
+ skge_write16(hw, B3_PA_TOINI_TX2, SK_PKT_TO_MAX);
+}
+
+static void genesis_reset(struct skge_hw *hw, int port)
+{
+ int i;
+ u64 zero = 0;
+
+ /* reset the statistics module */
+ skge_xm_write32(hw, port, XM_GP_PORT, XM_GP_RES_STAT);
+ skge_xm_write16(hw, port, XM_IMSK, 0xffff); /* disable XMAC IRQs */
+ skge_xm_write32(hw, port, XM_MODE, 0); /* clear Mode Reg */
+ skge_xm_write16(hw, port, XM_TX_CMD, 0); /* reset TX CMD Reg */
+ skge_xm_write16(hw, port, XM_RX_CMD, 0); /* reset RX CMD Reg */
+
+ /* disable all PHY IRQs */
+ if (hw->phy_type == SK_PHY_BCOM)
+ skge_xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff);
+
+ skge_xm_outhash(hw, port, XM_HSM, (u8 *) &zero);
+ for (i = 0; i < 15; i++)
+ skge_xm_outaddr(hw, port, XM_EXM(i), (u8 *) &zero);
+ skge_xm_outhash(hw, port, XM_SRC_CHK, (u8 *) &zero);
+}
+
+
+static void genesis_mac_init(struct skge_hw *hw, int port)
+{
+ struct skge_port *skge = netdev_priv(hw->dev[port]);
+ int i;
+ u32 r;
+ u16 id1;
+ u16 ctrl1, ctrl2, ctrl3, ctrl4, ctrl5;
+
+ /* magic workaround patterns for Broadcom */
+ static const struct {
+ u16 reg;
+ u16 val;
+ } A1hack[] = {
+ { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 },
+ { 0x17, 0x0013 }, { 0x15, 0x0404 }, { 0x17, 0x8006 },
+ { 0x15, 0x0132 }, { 0x17, 0x8006 }, { 0x15, 0x0232 },
+ { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 },
+ }, C0hack[] = {
+ { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1204 },
+ { 0x17, 0x0013 }, { 0x15, 0x0A04 }, { 0x18, 0x0420 },
+ };
+
+
+ /* initialize Rx, Tx and Link LED */
+ skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_ON);
+ skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON);
+
+ skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_START);
+ skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_START);
+
+ /* Unreset the XMAC. */
+ skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
+
+ /*
+ * Perform additional initialization for external PHYs,
+ * namely for the 1000baseTX cards that use the XMAC's
+ * GMII mode.
+ */
+ spin_lock_bh(&hw->phy_lock);
+ if (hw->phy_type != SK_PHY_XMAC) {
+ /* Take PHY out of reset. */
+ r = skge_read32(hw, B2_GP_IO);
+ if (port == 0)
+ r |= GP_DIR_0|GP_IO_0;
+ else
+ r |= GP_DIR_2|GP_IO_2;
+
+ skge_write32(hw, B2_GP_IO, r);
+ skge_read32(hw, B2_GP_IO);
+
+ /* Enable GMII mode on the XMAC. */
+ skge_xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
+
+ id1 = skge_xm_phy_read(hw, port, PHY_XMAC_ID1);
+
+ /* Optimize MDIO transfer by suppressing preamble. */
+ skge_xm_write16(hw, port, XM_MMU_CMD,
+ skge_xm_read16(hw, port, XM_MMU_CMD)
+ | XM_MMU_NO_PRE);
+
+ if (id1 == PHY_BCOM_ID1_C0) {
+ /*
+ * Workaround BCOM Errata for the C0 type.
+ * Write magic patterns to reserved registers.
+ */
+ for (i = 0; i < ARRAY_SIZE(C0hack); i++)
+ skge_xm_phy_write(hw, port,
+ C0hack[i].reg, C0hack[i].val);
+
+ } else if (id1 == PHY_BCOM_ID1_A1) {
+ /*
+ * Workaround BCOM Errata for the A1 type.
+ * Write magic patterns to reserved registers.
+ */
+ for (i = 0; i < ARRAY_SIZE(A1hack); i++)
+ skge_xm_phy_write(hw, port,
+ A1hack[i].reg, A1hack[i].val);
+ }
+
+ /*
+ * Workaround BCOM Errata (#10523) for all BCom PHYs.
+ * Disable Power Management after reset.
+ */
+ r = skge_xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL);
+ skge_xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r | PHY_B_AC_DIS_PM);
+ }
+
+ /* Dummy read */
+ skge_xm_read16(hw, port, XM_ISRC);
+
+ r = skge_xm_read32(hw, port, XM_MODE);
+ skge_xm_write32(hw, port, XM_MODE, r|XM_MD_CSA);
+
+ /* We don't need the FCS appended to the packet. */
+ r = skge_xm_read16(hw, port, XM_RX_CMD);
+ skge_xm_write16(hw, port, XM_RX_CMD, r | XM_RX_STRIP_FCS);
+
+ /* We want short frames padded to 60 bytes. */
+ r = skge_xm_read16(hw, port, XM_TX_CMD);
+ skge_xm_write16(hw, port, XM_TX_CMD, r | XM_TX_AUTO_PAD);
+
+ /*
+ * Enable the reception of all error frames. This is is
+ * a necessary evil due to the design of the XMAC. The
+ * XMAC's receive FIFO is only 8K in size, however jumbo
+ * frames can be up to 9000 bytes in length. When bad
+ * frame filtering is enabled, the XMAC's RX FIFO operates
+ * in 'store and forward' mode. For this to work, the
+ * entire frame has to fit into the FIFO, but that means
+ * that jumbo frames larger than 8192 bytes will be
+ * truncated. Disabling all bad frame filtering causes
+ * the RX FIFO to operate in streaming mode, in which
+ * case the XMAC will start transfering frames out of the
+ * RX FIFO as soon as the FIFO threshold is reached.
+ */
+ r = skge_xm_read32(hw, port, XM_MODE);
+ skge_xm_write32(hw, port, XM_MODE,
+ XM_MD_RX_CRCE|XM_MD_RX_LONG|XM_MD_RX_RUNT|
+ XM_MD_RX_ERR|XM_MD_RX_IRLE);
+
+ skge_xm_outaddr(hw, port, XM_SA, hw->dev[port]->dev_addr);
+ skge_xm_outaddr(hw, port, XM_EXM(0), hw->dev[port]->dev_addr);
+
+ /*
+ * Bump up the transmit threshold. This helps hold off transmit
+ * underruns when we're blasting traffic from both ports at once.
+ */
+ skge_xm_write16(hw, port, XM_TX_THR, 512);
+
+ /* Configure MAC arbiter */
+ skge_write16(hw, B3_MA_TO_CTRL, MA_RST_CLR);
+
+ /* configure timeout values */
+ skge_write8(hw, B3_MA_TOINI_RX1, 72);
+ skge_write8(hw, B3_MA_TOINI_RX2, 72);
+ skge_write8(hw, B3_MA_TOINI_TX1, 72);
+ skge_write8(hw, B3_MA_TOINI_TX2, 72);
+
+ skge_write8(hw, B3_MA_RCINI_RX1, 0);
+ skge_write8(hw, B3_MA_RCINI_RX2, 0);
+ skge_write8(hw, B3_MA_RCINI_TX1, 0);
+ skge_write8(hw, B3_MA_RCINI_TX2, 0);
+
+ /* Configure Rx MAC FIFO */
+ skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_RST_CLR);
+ skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_ENA_TIM_PAT);
+ skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_ENA_OP_MD);
+
+ /* Configure Tx MAC FIFO */
+ skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_RST_CLR);
+ skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF);
+ skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_ENA_OP_MD);
+
+ if (hw->dev[port]->mtu > ETH_DATA_LEN) {
+ /* Enable frame flushing if jumbo frames used */
+ skge_write16(hw, SKGEMAC_REG(port,RX_MFF_CTRL1), MFF_ENA_FLUSH);
+ } else {
+ /* enable timeout timers if normal frames */
+ skge_write16(hw, B3_PA_CTRL,
+ port == 0 ? PA_ENA_TO_TX1 : PA_ENA_TO_TX2);
+ }
+
+
+ r = skge_xm_read16(hw, port, XM_RX_CMD);
+ if (hw->dev[port]->mtu > ETH_DATA_LEN)
+ skge_xm_write16(hw, port, XM_RX_CMD, r | XM_RX_BIG_PK_OK);
+ else
+ skge_xm_write16(hw, port, XM_RX_CMD, r & ~(XM_RX_BIG_PK_OK));
+
+ switch (hw->phy_type) {
+ case SK_PHY_XMAC:
+ if (skge->autoneg == AUTONEG_ENABLE) {
+ ctrl1 = PHY_X_AN_FD | PHY_X_AN_HD;
+
+ switch (skge->flow_control) {
+ case FLOW_MODE_NONE:
+ ctrl1 |= PHY_X_P_NO_PAUSE;
+ break;
+ case FLOW_MODE_LOC_SEND:
+ ctrl1 |= PHY_X_P_ASYM_MD;
+ break;
+ case FLOW_MODE_SYMMETRIC:
+ ctrl1 |= PHY_X_P_SYM_MD;
+ break;
+ case FLOW_MODE_REM_SEND:
+ ctrl1 |= PHY_X_P_BOTH_MD;
+ break;
+ }
+
+ skge_xm_phy_write(hw, port, PHY_XMAC_AUNE_ADV, ctrl1);
+ ctrl2 = PHY_CT_ANE | PHY_CT_RE_CFG;
+ } else {
+ ctrl2 = 0;
+ if (skge->duplex == DUPLEX_FULL)
+ ctrl2 |= PHY_CT_DUP_MD;
+ }
+
+ skge_xm_phy_write(hw, port, PHY_XMAC_CTRL, ctrl2);
+ break;
+
+ case SK_PHY_BCOM:
+ ctrl1 = PHY_CT_SP1000;
+ ctrl2 = 0;
+ ctrl3 = PHY_SEL_TYPE;
+ ctrl4 = PHY_B_PEC_EN_LTR;
+ ctrl5 = PHY_B_AC_TX_TST;
+
+ if (skge->autoneg == AUTONEG_ENABLE) {
+ /*
+ * Workaround BCOM Errata #1 for the C5 type.
+ * 1000Base-T Link Acquisition Failure in Slave Mode
+ * Set Repeater/DTE bit 10 of the 1000Base-T Control Register
+ */
+ ctrl2 |= PHY_B_1000C_RD;
+ if (skge->advertising & ADVERTISED_1000baseT_Half)
+ ctrl2 |= PHY_B_1000C_AHD;
+ if (skge->advertising & ADVERTISED_1000baseT_Full)
+ ctrl2 |= PHY_B_1000C_AFD;
+
+ /* Set Flow-control capabilities */
+ switch (skge->flow_control) {
+ case FLOW_MODE_NONE:
+ ctrl3 |= PHY_B_P_NO_PAUSE;
+ break;
+ case FLOW_MODE_LOC_SEND:
+ ctrl3 |= PHY_B_P_ASYM_MD;
+ break;
+ case FLOW_MODE_SYMMETRIC:
+ ctrl3 |= PHY_B_P_SYM_MD;
+ break;
+ case FLOW_MODE_REM_SEND:
+ ctrl3 |= PHY_B_P_BOTH_MD;
+ break;
+ }
+
+ /* Restart Auto-negotiation */
+ ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG;
+ } else {
+ if (skge->duplex == DUPLEX_FULL)
+ ctrl1 |= PHY_CT_DUP_MD;
+
+ ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */
+ }
+
+ skge_xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, ctrl2);
+ skge_xm_phy_write(hw, port, PHY_BCOM_AUNE_ADV, ctrl3);
+
+ if (skge->netdev->mtu > ETH_DATA_LEN) {
+ ctrl4 |= PHY_B_PEC_HIGH_LA;
+ ctrl5 |= PHY_B_AC_LONG_PACK;
+
+ skge_xm_phy_write(hw, port,PHY_BCOM_AUX_CTRL, ctrl5);
+ }
+
+ skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ctrl4);
+ skge_xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl1);
+ break;
+ }
+ spin_unlock_bh(&hw->phy_lock);
+
+ /* Clear MIB counters */
+ skge_xm_write16(hw, port, XM_STAT_CMD,
+ XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+ /* Clear two times according to Errata #3 */
+ skge_xm_write16(hw, port, XM_STAT_CMD,
+ XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+
+ /* Start polling for link status */
+ mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
+}
+
+static void genesis_stop(struct skge_port *skge)
+{
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+
+ /* Clear Tx packet arbiter timeout IRQ */
+ skge_write16(hw, B3_PA_CTRL,
+ port == 0 ? PA_CLR_TO_TX1 : PA_CLR_TO_TX2);
+
+ /*
+ * If the transfer stucks at the MAC the STOP command will not
+ * terminate if we don't flush the XMAC's transmit FIFO !
+ */
+ skge_xm_write32(hw, port, XM_MODE,
+ skge_xm_read32(hw, port, XM_MODE)|XM_MD_FTF);
+
+
+ /* Reset the MAC */
+ skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_SET_MAC_RST);
+
+ /* For external PHYs there must be special handling */
+ if (hw->phy_type != SK_PHY_XMAC) {
+ u32 reg = skge_read32(hw, B2_GP_IO);
+
+ if (port == 0) {
+ reg |= GP_DIR_0;
+ reg &= ~GP_IO_0;
+ } else {
+ reg |= GP_DIR_2;
+ reg &= ~GP_IO_2;
+ }
+ skge_write32(hw, B2_GP_IO, reg);
+ skge_read32(hw, B2_GP_IO);
+ }
+
+ skge_xm_write16(hw, port, XM_MMU_CMD,
+ skge_xm_read16(hw, port, XM_MMU_CMD)
+ & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX));
+
+ skge_xm_read16(hw, port, XM_MMU_CMD);
+}
+
+
+static void genesis_get_stats(struct skge_port *skge, u64 *data)
+{
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+ int i;
+ unsigned long timeout = jiffies + HZ;
+
+ skge_xm_write16(hw, port,
+ XM_STAT_CMD, XM_SC_SNP_TXC | XM_SC_SNP_RXC);
+
+ /* wait for update to complete */
+ while (skge_xm_read16(hw, port, XM_STAT_CMD)
+ & (XM_SC_SNP_TXC | XM_SC_SNP_RXC)) {
+ if (time_after(jiffies, timeout))
+ break;
+ udelay(10);
+ }
+
+ /* special case for 64 bit octet counter */
+ data[0] = (u64) skge_xm_read32(hw, port, XM_TXO_OK_HI) << 32
+ | skge_xm_read32(hw, port, XM_TXO_OK_LO);
+ data[1] = (u64) skge_xm_read32(hw, port, XM_RXO_OK_HI) << 32
+ | skge_xm_read32(hw, port, XM_RXO_OK_LO);
+
+ for (i = 2; i < ARRAY_SIZE(skge_stats); i++)
+ data[i] = skge_xm_read32(hw, port, skge_stats[i].xmac_offset);
+}
+
+static void genesis_mac_intr(struct skge_hw *hw, int port)
+{
+ struct skge_port *skge = netdev_priv(hw->dev[port]);
+ u16 status = skge_xm_read16(hw, port, XM_ISRC);
+
+ pr_debug("genesis_intr status %x\n", status);
+ if (hw->phy_type == SK_PHY_XMAC) {
+ /* LInk down, start polling for state change */
+ if (status & XM_IS_INP_ASS) {
+ skge_xm_write16(hw, port, XM_IMSK,
+ skge_xm_read16(hw, port, XM_IMSK) | XM_IS_INP_ASS);
+ mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
+ }
+ else if (status & XM_IS_AND)
+ mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
+ }
+
+ if (status & XM_IS_TXF_UR) {
+ skge_xm_write32(hw, port, XM_MODE, XM_MD_FTF);
+ ++skge->net_stats.tx_fifo_errors;
+ }
+ if (status & XM_IS_RXF_OV) {
+ skge_xm_write32(hw, port, XM_MODE, XM_MD_FRF);
+ ++skge->net_stats.rx_fifo_errors;
+ }
+}
+
+static void skge_gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val)
+{
+ int i;
+
+ skge_gma_write16(hw, port, GM_SMI_DATA, val);
+ skge_gma_write16(hw, port, GM_SMI_CTRL,
+ GM_SMI_CT_PHY_AD(hw->phy_addr) | GM_SMI_CT_REG_AD(reg));
+ for (i = 0; i < PHY_RETRIES; i++) {
+ udelay(1);
+
+ if (!(skge_gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY))
+ break;
+ }
+}
+
+static u16 skge_gm_phy_read(struct skge_hw *hw, int port, u16 reg)
+{
+ int i;
+
+ skge_gma_write16(hw, port, GM_SMI_CTRL,
+ GM_SMI_CT_PHY_AD(hw->phy_addr)
+ | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
+
+ for (i = 0; i < PHY_RETRIES; i++) {
+ udelay(1);
+ if (skge_gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL)
+ goto ready;
+ }
+
+ printk(KERN_WARNING PFX "%s: phy read timeout\n",
+ hw->dev[port]->name);
+ return 0;
+ ready:
+ return skge_gma_read16(hw, port, GM_SMI_DATA);
+}
+
+static void genesis_link_down(struct skge_port *skge)
+{
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+
+ pr_debug("genesis_link_down\n");
+
+ skge_xm_write16(hw, port, XM_MMU_CMD,
+ skge_xm_read16(hw, port, XM_MMU_CMD)
+ & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX));
+
+ /* dummy read to ensure writing */
+ (void) skge_xm_read16(hw, port, XM_MMU_CMD);
+
+ skge_link_down(skge);
+}
+
+static void genesis_link_up(struct skge_port *skge)
+{
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+ u16 cmd;
+ u32 mode, msk;
+
+ pr_debug("genesis_link_up\n");
+ cmd = skge_xm_read16(hw, port, XM_MMU_CMD);
+
+ /*
+ * enabling pause frame reception is required for 1000BT
+ * because the XMAC is not reset if the link is going down
+ */
+ if (skge->flow_control == FLOW_MODE_NONE ||
+ skge->flow_control == FLOW_MODE_LOC_SEND)
+ cmd |= XM_MMU_IGN_PF;
+ else
+ /* Enable Pause Frame Reception */
+ cmd &= ~XM_MMU_IGN_PF;
+
+ skge_xm_write16(hw, port, XM_MMU_CMD, cmd);
+
+ mode = skge_xm_read32(hw, port, XM_MODE);
+ if (skge->flow_control == FLOW_MODE_SYMMETRIC ||
+ skge->flow_control == FLOW_MODE_LOC_SEND) {
+ /*
+ * Configure Pause Frame Generation
+ * Use internal and external Pause Frame Generation.
+ * Sending pause frames is edge triggered.
+ * Send a Pause frame with the maximum pause time if
+ * internal oder external FIFO full condition occurs.
+ * Send a zero pause time frame to re-start transmission.
+ */
+ /* XM_PAUSE_DA = '010000C28001' (default) */
+ /* XM_MAC_PTIME = 0xffff (maximum) */
+ /* remember this value is defined in big endian (!) */
+ skge_xm_write16(hw, port, XM_MAC_PTIME, 0xffff);
+
+ mode |= XM_PAUSE_MODE;
+ skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_ENA_PAUSE);
+ } else {
+ /*
+ * disable pause frame generation is required for 1000BT
+ * because the XMAC is not reset if the link is going down
+ */
+ /* Disable Pause Mode in Mode Register */
+ mode &= ~XM_PAUSE_MODE;
+
+ skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_DIS_PAUSE);
+ }
+
+ skge_xm_write32(hw, port, XM_MODE, mode);
+
+ msk = XM_DEF_MSK;
+ if (hw->phy_type != SK_PHY_XMAC)
+ msk |= XM_IS_INP_ASS; /* disable GP0 interrupt bit */
+
+ skge_xm_write16(hw, port, XM_IMSK, msk);
+ skge_xm_read16(hw, port, XM_ISRC);
+
+ /* get MMU Command Reg. */
+ cmd = skge_xm_read16(hw, port, XM_MMU_CMD);
+ if (hw->phy_type != SK_PHY_XMAC && skge->duplex == DUPLEX_FULL)
+ cmd |= XM_MMU_GMII_FD;
+
+ if (hw->phy_type == SK_PHY_BCOM) {
+ /*
+ * Workaround BCOM Errata (#10523) for all BCom Phys
+ * Enable Power Management after link up
+ */
+ skge_xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL,
+ skge_xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL)
+ & ~PHY_B_AC_DIS_PM);
+ skge_xm_phy_write(hw, port, PHY_BCOM_INT_MASK,
+ PHY_B_DEF_MSK);
+ }
+
+ /* enable Rx/Tx */
+ skge_xm_write16(hw, port, XM_MMU_CMD,
+ cmd | XM_MMU_ENA_RX | XM_MMU_ENA_TX);
+ skge_link_up(skge);
+}
+
+
+static void genesis_bcom_intr(struct skge_port *skge)
+{
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+ u16 stat = skge_xm_phy_read(hw, port, PHY_BCOM_INT_STAT);
+
+ pr_debug("genesis_bcom intr stat=%x\n", stat);
+
+ /* Workaround BCom Errata:
+ * enable and disable loopback mode if "NO HCD" occurs.
+ */
+ if (stat & PHY_B_IS_NO_HDCL) {
+ u16 ctrl = skge_xm_phy_read(hw, port, PHY_BCOM_CTRL);
+ skge_xm_phy_write(hw, port, PHY_BCOM_CTRL,
+ ctrl | PHY_CT_LOOP);
+ skge_xm_phy_write(hw, port, PHY_BCOM_CTRL,
+ ctrl & ~PHY_CT_LOOP);
+ }
+
+ stat = skge_xm_phy_read(hw, port, PHY_BCOM_STAT);
+ if (stat & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) {
+ u16 aux = skge_xm_phy_read(hw, port, PHY_BCOM_AUX_STAT);
+ if ( !(aux & PHY_B_AS_LS) && netif_carrier_ok(skge->netdev))
+ genesis_link_down(skge);
+
+ else if (stat & PHY_B_IS_LST_CHANGE) {
+ if (aux & PHY_B_AS_AN_C) {
+ switch (aux & PHY_B_AS_AN_RES_MSK) {
+ case PHY_B_RES_1000FD:
+ skge->duplex = DUPLEX_FULL;
+ break;
+ case PHY_B_RES_1000HD:
+ skge->duplex = DUPLEX_HALF;
+ break;
+ }
+
+ switch (aux & PHY_B_AS_PAUSE_MSK) {
+ case PHY_B_AS_PAUSE_MSK:
+ skge->flow_control = FLOW_MODE_SYMMETRIC;
+ break;
+ case PHY_B_AS_PRR:
+ skge->flow_control = FLOW_MODE_REM_SEND;
+ break;
+ case PHY_B_AS_PRT:
+ skge->flow_control = FLOW_MODE_LOC_SEND;
+ break;
+ default:
+ skge->flow_control = FLOW_MODE_NONE;
+ }
+ skge->speed = SPEED_1000;
+ }
+ genesis_link_up(skge);
+ }
+ else
+ mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
+ }
+}
+
+/* Perodic poll of phy status to check for link transistion */
+static void skge_link_timer(unsigned long __arg)
+{
+ struct skge_port *skge = (struct skge_port *) __arg;
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+
+ if (hw->chip_id != CHIP_ID_GENESIS || !netif_running(skge->netdev))
+ return;
+
+ spin_lock_bh(&hw->phy_lock);
+ if (hw->phy_type == SK_PHY_BCOM)
+ genesis_bcom_intr(skge);
+ else {
+ int i;
+ for (i = 0; i < 3; i++)
+ if (skge_xm_read16(hw, port, XM_ISRC) & XM_IS_INP_ASS)
+ break;
+
+ if (i == 3)
+ mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
+ else
+ genesis_link_up(skge);
+ }
+ spin_unlock_bh(&hw->phy_lock);
+}
+
+/* Marvell Phy Initailization */
+static void yukon_init(struct skge_hw *hw, int port)
+{
+ struct skge_port *skge = netdev_priv(hw->dev[port]);
+ u16 ctrl, ct1000, adv;
+ u16 ledctrl, ledover;
+
+ pr_debug("yukon_init\n");
+ if (skge->autoneg == AUTONEG_ENABLE) {
+ u16 ectrl = skge_gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
+
+ ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
+ PHY_M_EC_MAC_S_MSK);
+ ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ);
+
+ /* on PHY 88E1111 there is a change for downshift control */
+ if (hw->chip_id == CHIP_ID_YUKON_EC)
+ ectrl |= PHY_M_EC_M_DSC_2(0) | PHY_M_EC_DOWN_S_ENA;
+ else
+ ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1);
+
+ skge_gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl);
+ }
+
+ ctrl = skge_gm_phy_read(hw, port, PHY_MARV_CTRL);
+ if (skge->autoneg == AUTONEG_DISABLE)
+ ctrl &= ~PHY_CT_ANE;
+
+ ctrl |= PHY_CT_RESET;
+ skge_gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
+
+ ctrl = 0;
+ ct1000 = 0;
+ adv = PHY_SEL_TYPE;
+
+ if (skge->autoneg == AUTONEG_ENABLE) {
+ if (iscopper(hw)) {
+ if (skge->advertising & ADVERTISED_1000baseT_Full)
+ ct1000 |= PHY_M_1000C_AFD;
+ if (skge->advertising & ADVERTISED_1000baseT_Half)
+ ct1000 |= PHY_M_1000C_AHD;
+ if (skge->advertising & ADVERTISED_100baseT_Full)
+ adv |= PHY_M_AN_100_FD;
+ if (skge->advertising & ADVERTISED_100baseT_Half)
+ adv |= PHY_M_AN_100_HD;
+ if (skge->advertising & ADVERTISED_10baseT_Full)
+ adv |= PHY_M_AN_10_FD;
+ if (skge->advertising & ADVERTISED_10baseT_Half)
+ adv |= PHY_M_AN_10_HD;
+
+ /* Set Flow-control capabilities */
+ switch (skge->flow_control) {
+ case FLOW_MODE_NONE:
+ adv |= PHY_B_P_NO_PAUSE;
+ break;
+ case FLOW_MODE_LOC_SEND:
+ adv |= PHY_B_P_ASYM_MD;
+ break;
+ case FLOW_MODE_SYMMETRIC:
+ adv |= PHY_B_P_SYM_MD;
+ break;
+ case FLOW_MODE_REM_SEND:
+ adv |= PHY_B_P_BOTH_MD;
+ break;
+ }
+ } else { /* special defines for FIBER (88E1011S only) */
+ adv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD;
+
+ /* Set Flow-control capabilities */
+ switch (skge->flow_control) {
+ case FLOW_MODE_NONE:
+ adv |= PHY_M_P_NO_PAUSE_X;
+ break;
+ case FLOW_MODE_LOC_SEND:
+ adv |= PHY_M_P_ASYM_MD_X;
+ break;
+ case FLOW_MODE_SYMMETRIC:
+ adv |= PHY_M_P_SYM_MD_X;
+ break;
+ case FLOW_MODE_REM_SEND:
+ adv |= PHY_M_P_BOTH_MD_X;
+ break;
+ }
+ }
+ /* Restart Auto-negotiation */
+ ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
+ } else {
+ /* forced speed/duplex settings */
+ ct1000 = PHY_M_1000C_MSE;
+
+ if (skge->duplex == DUPLEX_FULL)
+ ctrl |= PHY_CT_DUP_MD;
+
+ switch (skge->speed) {
+ case SPEED_1000:
+ ctrl |= PHY_CT_SP1000;
+ break;
+ case SPEED_100:
+ ctrl |= PHY_CT_SP100;
+ break;
+ }
+
+ ctrl |= PHY_CT_RESET;
+ }
+
+ if (hw->chip_id != CHIP_ID_YUKON_FE)
+ skge_gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
+
+ skge_gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
+ skge_gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
+
+ /* Setup Phy LED's */
+ ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
+ ledover = 0;
+
+ if (hw->chip_id == CHIP_ID_YUKON_FE) {
+ /* on 88E3082 these bits are at 11..9 (shifted left) */
+ ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1;
+
+ skge_gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR,
+ ((skge_gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR)
+
+ & ~PHY_M_FELP_LED1_MSK)
+ | PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL)));
+ } else {
+ /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
+ ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
+
+ /* turn off the Rx LED (LED_RX) */
+ ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
+ }
+
+ /* disable blink mode (LED_DUPLEX) on collisions */
+ ctrl |= PHY_M_LEDC_DP_CTRL;
+ skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
+
+ if (skge->autoneg == AUTONEG_DISABLE || skge->speed == SPEED_100) {
+ /* turn on 100 Mbps LED (LED_LINK100) */
+ ledover |= PHY_M_LED_MO_100(MO_LED_ON);
+ }
+
+ if (ledover)
+ skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
+
+ /* Enable phy interrupt on autonegotiation complete (or link up) */
+ if (skge->autoneg == AUTONEG_ENABLE)
+ skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
+ else
+ skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+}
+
+static void yukon_reset(struct skge_hw *hw, int port)
+{
+ skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);/* disable PHY IRQs */
+ skge_gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
+ skge_gma_write16(hw, port, GM_MC_ADDR_H2, 0);
+ skge_gma_write16(hw, port, GM_MC_ADDR_H3, 0);
+ skge_gma_write16(hw, port, GM_MC_ADDR_H4, 0);
+
+ skge_gma_write16(hw, port, GM_RX_CTRL,
+ skge_gma_read16(hw, port, GM_RX_CTRL)
+ | GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
+}
+
+static void yukon_mac_init(struct skge_hw *hw, int port)
+{
+ struct skge_port *skge = netdev_priv(hw->dev[port]);
+ int i;
+ u32 reg;
+ const u8 *addr = hw->dev[port]->dev_addr;
+
+ /* WA code for COMA mode -- set PHY reset */
+ if (hw->chip_id == CHIP_ID_YUKON_LITE &&
+ chip_rev(hw) == CHIP_REV_YU_LITE_A3)
+ skge_write32(hw, B2_GP_IO,
+ (skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9));
+
+ /* hard reset */
+ skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), GPC_RST_SET);
+ skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_RST_SET);
+
+ /* WA code for COMA mode -- clear PHY reset */
+ if (hw->chip_id == CHIP_ID_YUKON_LITE &&
+ chip_rev(hw) == CHIP_REV_YU_LITE_A3)
+ skge_write32(hw, B2_GP_IO,
+ (skge_read32(hw, B2_GP_IO) | GP_DIR_9)
+ & ~GP_IO_9);
+
+ /* Set hardware config mode */
+ reg = GPC_INT_POL_HI | GPC_DIS_FC | GPC_DIS_SLEEP |
+ GPC_ENA_XC | GPC_ANEG_ADV_ALL_M | GPC_ENA_PAUSE;
+ reg |= iscopper(hw) ? GPC_HWCFG_GMII_COP : GPC_HWCFG_GMII_FIB;
+
+ /* Clear GMC reset */
+ skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), reg | GPC_RST_SET);
+ skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), reg | GPC_RST_CLR);
+ skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR);
+ if (skge->autoneg == AUTONEG_DISABLE) {
+ reg = GM_GPCR_AU_ALL_DIS;
+ skge_gma_write16(hw, port, GM_GP_CTRL,
+ skge_gma_read16(hw, port, GM_GP_CTRL) | reg);
+
+ switch (skge->speed) {
+ case SPEED_1000:
+ reg |= GM_GPCR_SPEED_1000;
+ /* fallthru */
+ case SPEED_100:
+ reg |= GM_GPCR_SPEED_100;
+ }
+
+ if (skge->duplex == DUPLEX_FULL)
+ reg |= GM_GPCR_DUP_FULL;
+ } else
+ reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL;
+ switch (skge->flow_control) {
+ case FLOW_MODE_NONE:
+ skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
+ reg |= GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
+ break;
+ case FLOW_MODE_LOC_SEND:
+ /* disable Rx flow-control */
+ reg |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
+ }
+
+ skge_gma_write16(hw, port, GM_GP_CTRL, reg);
+ skge_read16(hw, GMAC_IRQ_SRC);
+
+ spin_lock_bh(&hw->phy_lock);
+ yukon_init(hw, port);
+ spin_unlock_bh(&hw->phy_lock);
+
+ /* MIB clear */
+ reg = skge_gma_read16(hw, port, GM_PHY_ADDR);
+ skge_gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR);
+
+ for (i = 0; i < GM_MIB_CNT_SIZE; i++)
+ skge_gma_read16(hw, port, GM_MIB_CNT_BASE + 8*i);
+ skge_gma_write16(hw, port, GM_PHY_ADDR, reg);
+
+ /* transmit control */
+ skge_gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF));
+
+ /* receive control reg: unicast + multicast + no FCS */
+ skge_gma_write16(hw, port, GM_RX_CTRL,
+ GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA);
+
+ /* transmit flow control */
+ skge_gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff);
+
+ /* transmit parameter */
+ skge_gma_write16(hw, port, GM_TX_PARAM,
+ TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) |
+ TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) |
+ TX_IPG_JAM_DATA(TX_IPG_JAM_DEF));
+
+ /* serial mode register */
+ reg = GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
+ if (hw->dev[port]->mtu > 1500)
+ reg |= GM_SMOD_JUMBO_ENA;
+
+ skge_gma_write16(hw, port, GM_SERIAL_MODE, reg);
+
+ /* physical address: used for pause frames */
+ skge_gm_set_addr(hw, port, GM_SRC_ADDR_1L, addr);
+ /* virtual address for data */
+ skge_gm_set_addr(hw, port, GM_SRC_ADDR_2L, addr);
+
+ /* enable interrupt mask for counter overflows */
+ skge_gma_write16(hw, port, GM_TX_IRQ_MSK, 0);
+ skge_gma_write16(hw, port, GM_RX_IRQ_MSK, 0);
+ skge_gma_write16(hw, port, GM_TR_IRQ_MSK, 0);
+
+ /* Initialize Mac Fifo */
+
+ /* Configure Rx MAC FIFO */
+ skge_write16(hw, SKGEMAC_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK);
+ reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
+ if (hw->chip_id == CHIP_ID_YUKON_LITE &&
+ chip_rev(hw) == CHIP_REV_YU_LITE_A3)
+ reg &= ~GMF_RX_F_FL_ON;
+ skge_write8(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
+ skge_write16(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), reg);
+ skge_write16(hw, SKGEMAC_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF);
+
+ /* Configure Tx MAC FIFO */
+ skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
+ skge_write16(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
+}
+
+static void yukon_stop(struct skge_port *skge)
+{
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+
+ if (hw->chip_id == CHIP_ID_YUKON_LITE &&
+ chip_rev(hw) == CHIP_REV_YU_LITE_A3) {
+ skge_write32(hw, B2_GP_IO,
+ skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9);
+ }
+
+ skge_gma_write16(hw, port, GM_GP_CTRL,
+ skge_gma_read16(hw, port, GM_GP_CTRL)
+ & ~(GM_GPCR_RX_ENA|GM_GPCR_RX_ENA));
+ skge_gma_read16(hw, port, GM_GP_CTRL);
+
+ /* set GPHY Control reset */
+ skge_gma_write32(hw, port, GPHY_CTRL, GPC_RST_SET);
+ skge_gma_write32(hw, port, GMAC_CTRL, GMC_RST_SET);
+}
+
+static void yukon_get_stats(struct skge_port *skge, u64 *data)
+{
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+ int i;
+
+ data[0] = (u64) skge_gma_read32(hw, port, GM_TXO_OK_HI) << 32
+ | skge_gma_read32(hw, port, GM_TXO_OK_LO);
+ data[1] = (u64) skge_gma_read32(hw, port, GM_RXO_OK_HI) << 32
+ | skge_gma_read32(hw, port, GM_RXO_OK_LO);
+
+ for (i = 2; i < ARRAY_SIZE(skge_stats); i++)
+ data[i] = skge_gma_read32(hw, port,
+ skge_stats[i].gma_offset);
+}
+
+static void yukon_mac_intr(struct skge_hw *hw, int port)
+{
+ struct skge_port *skge = netdev_priv(hw->dev[port]);
+ u8 status = skge_read8(hw, SKGEMAC_REG(port, GMAC_IRQ_SRC));
+
+ pr_debug("yukon_intr status %x\n", status);
+ if (status & GM_IS_RX_FF_OR) {
+ ++skge->net_stats.rx_fifo_errors;
+ skge_gma_write8(hw, port, RX_GMF_CTRL_T, GMF_CLI_RX_FO);
+ }
+ if (status & GM_IS_TX_FF_UR) {
+ ++skge->net_stats.tx_fifo_errors;
+ skge_gma_write8(hw, port, TX_GMF_CTRL_T, GMF_CLI_TX_FU);
+ }
+
+}
+
+static u16 yukon_speed(const struct skge_hw *hw, u16 aux)
+{
+ if (hw->chip_id == CHIP_ID_YUKON_FE)
+ return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10;
+
+ switch(aux & PHY_M_PS_SPEED_MSK) {
+ case PHY_M_PS_SPEED_1000:
+ return SPEED_1000;
+ case PHY_M_PS_SPEED_100:
+ return SPEED_100;
+ default:
+ return SPEED_10;
+ }
+}
+
+static void yukon_link_up(struct skge_port *skge)
+{
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+ u16 reg;
+
+ pr_debug("yukon_link_up\n");
+
+ /* Enable Transmit FIFO Underrun */
+ skge_write8(hw, GMAC_IRQ_MSK, GMAC_DEF_MSK);
+
+ reg = skge_gma_read16(hw, port, GM_GP_CTRL);
+ if (skge->duplex == DUPLEX_FULL || skge->autoneg == AUTONEG_ENABLE)
+ reg |= GM_GPCR_DUP_FULL;
+
+ /* enable Rx/Tx */
+ reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
+ skge_gma_write16(hw, port, GM_GP_CTRL, reg);
+
+ skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+ skge_link_up(skge);
+}
+
+static void yukon_link_down(struct skge_port *skge)
+{
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+
+ pr_debug("yukon_link_down\n");
+ skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
+ skge_gm_phy_write(hw, port, GM_GP_CTRL,
+ skge_gm_phy_read(hw, port, GM_GP_CTRL)
+ & ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA));
+
+ if (hw->chip_id != CHIP_ID_YUKON_FE &&
+ skge->flow_control == FLOW_MODE_REM_SEND) {
+ /* restore Asymmetric Pause bit */
+ skge_gm_phy_write(hw, port, PHY_MARV_AUNE_ADV,
+ skge_gm_phy_read(hw, port,
+ PHY_MARV_AUNE_ADV)
+ | PHY_M_AN_ASP);
+
+ }
+
+ yukon_reset(hw, port);
+ skge_link_down(skge);
+
+ yukon_init(hw, port);
+}
+
+static void yukon_phy_intr(struct skge_port *skge)
+{
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+ const char *reason = NULL;
+ u16 istatus, phystat;
+
+ istatus = skge_gm_phy_read(hw, port, PHY_MARV_INT_STAT);
+ phystat = skge_gm_phy_read(hw, port, PHY_MARV_PHY_STAT);
+ pr_debug("yukon phy intr istat=%x phy_stat=%x\n", istatus, phystat);
+
+ if (istatus & PHY_M_IS_AN_COMPL) {
+ if (skge_gm_phy_read(hw, port, PHY_MARV_AUNE_LP)
+ & PHY_M_AN_RF) {
+ reason = "remote fault";
+ goto failed;
+ }
+
+ if (!(hw->chip_id == CHIP_ID_YUKON_FE || hw->chip_id == CHIP_ID_YUKON_EC)
+ && (skge_gm_phy_read(hw, port, PHY_MARV_1000T_STAT)
+ & PHY_B_1000S_MSF)) {
+ reason = "master/slave fault";
+ goto failed;
+ }
+
+ if (!(phystat & PHY_M_PS_SPDUP_RES)) {
+ reason = "speed/duplex";
+ goto failed;
+ }
+
+ skge->duplex = (phystat & PHY_M_PS_FULL_DUP)
+ ? DUPLEX_FULL : DUPLEX_HALF;
+ skge->speed = yukon_speed(hw, phystat);
+
+ /* Tx & Rx Pause Enabled bits are at 9..8 */
+ if (hw->chip_id == CHIP_ID_YUKON_XL)
+ phystat >>= 6;
+
+ /* We are using IEEE 802.3z/D5.0 Table 37-4 */
+ switch (phystat & PHY_M_PS_PAUSE_MSK) {
+ case PHY_M_PS_PAUSE_MSK:
+ skge->flow_control = FLOW_MODE_SYMMETRIC;
+ break;
+ case PHY_M_PS_RX_P_EN:
+ skge->flow_control = FLOW_MODE_REM_SEND;
+ break;
+ case PHY_M_PS_TX_P_EN:
+ skge->flow_control = FLOW_MODE_LOC_SEND;
+ break;
+ default:
+ skge->flow_control = FLOW_MODE_NONE;
+ }
+
+ if (skge->flow_control == FLOW_MODE_NONE ||
+ (skge->speed < SPEED_1000 && skge->duplex == DUPLEX_HALF))
+ skge_write8(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
+ else
+ skge_write8(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
+ yukon_link_up(skge);
+ return;
+ }
+
+ if (istatus & PHY_M_IS_LSP_CHANGE)
+ skge->speed = yukon_speed(hw, phystat);
+
+ if (istatus & PHY_M_IS_DUP_CHANGE)
+ skge->duplex = (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
+ if (istatus & PHY_M_IS_LST_CHANGE) {
+ if (phystat & PHY_M_PS_LINK_UP)
+ yukon_link_up(skge);
+ else
+ yukon_link_down(skge);
+ }
+ return;
+ failed:
+ printk(KERN_ERR PFX "%s: autonegotiation failed (%s)\n",
+ skge->netdev->name, reason);
+
+ /* XXX restart autonegotiation? */
+}
+
+static void skge_ramset(struct skge_hw *hw, u16 q, u32 start, size_t len)
+{
+ u32 end;
+
+ start /= 8;
+ len /= 8;
+ end = start + len - 1;
+
+ skge_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
+ skge_write32(hw, RB_ADDR(q, RB_START), start);
+ skge_write32(hw, RB_ADDR(q, RB_WP), start);
+ skge_write32(hw, RB_ADDR(q, RB_RP), start);
+ skge_write32(hw, RB_ADDR(q, RB_END), end);
+
+ if (q == Q_R1 || q == Q_R2) {
+ /* Set thresholds on receive queue's */
+ skge_write32(hw, RB_ADDR(q, RB_RX_UTPP),
+ start + (2*len)/3);
+ skge_write32(hw, RB_ADDR(q, RB_RX_LTPP),
+ start + (len/3));
+ } else {
+ /* Enable store & forward on Tx queue's because
+ * Tx FIFO is only 4K on Genesis and 1K on Yukon
+ */
+ skge_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD);
+ }
+
+ skge_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD);
+}
+
+/* Setup Bus Memory Interface */
+static void skge_qset(struct skge_port *skge, u16 q,
+ const struct skge_element *e)
+{
+ struct skge_hw *hw = skge->hw;
+ u32 watermark = 0x600;
+ u64 base = skge->dma + (e->desc - skge->mem);
+
+ /* optimization to reduce window on 32bit/33mhz */
+ if ((skge_read16(hw, B0_CTST) & (CS_BUS_CLOCK | CS_BUS_SLOT_SZ)) == 0)
+ watermark /= 2;
+
+ skge_write32(hw, Q_ADDR(q, Q_CSR), CSR_CLR_RESET);
+ skge_write32(hw, Q_ADDR(q, Q_F), watermark);
+ skge_write32(hw, Q_ADDR(q, Q_DA_H), (u32)(base >> 32));
+ skge_write32(hw, Q_ADDR(q, Q_DA_L), (u32)base);
+}
+
+static int skge_up(struct net_device *dev)
+{
+ struct skge_port *skge = netdev_priv(dev);
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+ u32 chunk, ram_addr;
+ size_t rx_size, tx_size;
+ int err;
+
+ if (netif_msg_ifup(skge))
+ printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
+
+ rx_size = skge->rx_ring.count * sizeof(struct skge_rx_desc);
+ tx_size = skge->tx_ring.count * sizeof(struct skge_tx_desc);
+ skge->mem_size = tx_size + rx_size;
+ skge->mem = pci_alloc_consistent(hw->pdev, skge->mem_size, &skge->dma);
+ if (!skge->mem)
+ return -ENOMEM;
+
+ memset(skge->mem, 0, skge->mem_size);
+
+ if ((err = skge_ring_alloc(&skge->rx_ring, skge->mem, skge->dma)))
+ goto free_pci_mem;
+
+ if (skge_rx_fill(skge))
+ goto free_rx_ring;
+
+ if ((err = skge_ring_alloc(&skge->tx_ring, skge->mem + rx_size,
+ skge->dma + rx_size)))
+ goto free_rx_ring;
+
+ skge->tx_avail = skge->tx_ring.count - 1;
+
+ /* Initialze MAC */
+ if (hw->chip_id == CHIP_ID_GENESIS)
+ genesis_mac_init(hw, port);
+ else
+ yukon_mac_init(hw, port);
+
+ /* Configure RAMbuffers */
+ chunk = hw->ram_size / (isdualport(hw) ? 4 : 2);
+ ram_addr = hw->ram_offset + 2 * chunk * port;
+
+ skge_ramset(hw, rxqaddr[port], ram_addr, chunk);
+ skge_qset(skge, rxqaddr[port], skge->rx_ring.to_clean);
+
+ BUG_ON(skge->tx_ring.to_use != skge->tx_ring.to_clean);
+ skge_ramset(hw, txqaddr[port], ram_addr+chunk, chunk);
+ skge_qset(skge, txqaddr[port], skge->tx_ring.to_use);
+
+ /* Start receiver BMU */
+ wmb();
+ skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_START | CSR_IRQ_CL_F);
+
+ pr_debug("skge_up completed\n");
+ return 0;
+
+ free_rx_ring:
+ skge_rx_clean(skge);
+ kfree(skge->rx_ring.start);
+ free_pci_mem:
+ pci_free_consistent(hw->pdev, skge->mem_size, skge->mem, skge->dma);
+
+ return err;
+}
+
+static int skge_down(struct net_device *dev)
+{
+ struct skge_port *skge = netdev_priv(dev);
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+
+ if (netif_msg_ifdown(skge))
+ printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
+
+ netif_stop_queue(dev);
+
+ del_timer_sync(&skge->led_blink);
+ del_timer_sync(&skge->link_check);
+
+ /* Stop transmitter */
+ skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP);
+ skge_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
+ RB_RST_SET|RB_DIS_OP_MD);
+
+ if (hw->chip_id == CHIP_ID_GENESIS)
+ genesis_stop(skge);
+ else
+ yukon_stop(skge);
+
+ /* Disable Force Sync bit and Enable Alloc bit */
+ skge_write8(hw, SKGEMAC_REG(port, TXA_CTRL),
+ TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
+
+ /* Stop Interval Timer and Limit Counter of Tx Arbiter */
+ skge_write32(hw, SKGEMAC_REG(port, TXA_ITI_INI), 0L);
+ skge_write32(hw, SKGEMAC_REG(port, TXA_LIM_INI), 0L);
+
+ /* Reset PCI FIFO */
+ skge_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_SET_RESET);
+ skge_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
+
+ /* Reset the RAM Buffer async Tx queue */
+ skge_write8(hw, RB_ADDR(port == 0 ? Q_XA1 : Q_XA2, RB_CTRL), RB_RST_SET);
+ /* stop receiver */
+ skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_STOP);
+ skge_write32(hw, RB_ADDR(port ? Q_R2 : Q_R1, RB_CTRL),
+ RB_RST_SET|RB_DIS_OP_MD);
+ skge_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_SET_RESET);
+
+ if (hw->chip_id == CHIP_ID_GENESIS) {
+ skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_RST_SET);
+ skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_RST_SET);
+ skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_STOP);
+ skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_STOP);
+ } else {
+ skge_write8(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
+ skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
+ }
+
+ /* turn off led's */
+ skge_write16(hw, B0_LED, LED_STAT_OFF);
+
+ skge_tx_clean(skge);
+ skge_rx_clean(skge);
+
+ kfree(skge->rx_ring.start);
+ kfree(skge->tx_ring.start);
+ pci_free_consistent(hw->pdev, skge->mem_size, skge->mem, skge->dma);
+ return 0;
+}
+
+static int skge_xmit_frame(struct sk_buff *skb, struct net_device *dev)
+{
+ struct skge_port *skge = netdev_priv(dev);
+ struct skge_hw *hw = skge->hw;
+ struct skge_ring *ring = &skge->tx_ring;
+ struct skge_element *e;
+ struct skge_tx_desc *td;
+ int i;
+ u32 control, len;
+ u64 map;
+ unsigned long flags;
+
+ skb = skb_padto(skb, ETH_ZLEN);
+ if (!skb)
+ return NETDEV_TX_OK;
+
+ local_irq_save(flags);
+ if (!spin_trylock(&skge->tx_lock)) {
+ /* Collision - tell upper layer to requeue */
+ local_irq_restore(flags);
+ return NETDEV_TX_LOCKED;
+ }
+
+ if (unlikely(skge->tx_avail < skb_shinfo(skb)->nr_frags +1)) {
+ netif_stop_queue(dev);
+ spin_unlock_irqrestore(&skge->tx_lock, flags);
+
+ printk(KERN_WARNING PFX "%s: ring full when queue awake!\n",
+ dev->name);
+ return NETDEV_TX_BUSY;
+ }
+
+ e = ring->to_use;
+ td = e->desc;
+ e->skb = skb;
+ len = skb_headlen(skb);
+ map = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
+ pci_unmap_addr_set(e, mapaddr, map);
+ pci_unmap_len_set(e, maplen, len);
+
+ td->dma_lo = map;
+ td->dma_hi = map >> 32;
+
+ if (skb->ip_summed == CHECKSUM_HW) {
+ const struct iphdr *ip
+ = (const struct iphdr *) (skb->data + ETH_HLEN);
+ int offset = skb->h.raw - skb->data;
+
+ /* This seems backwards, but it is what the sk98lin
+ * does. Looks like hardware is wrong?
+ */
+ if (ip->protocol == IPPROTO_UDP
+ && chip_rev(hw) == 0 && hw->chip_id == CHIP_ID_YUKON)
+ control = BMU_TCP_CHECK;
+ else
+ control = BMU_UDP_CHECK;
+
+ td->csum_offs = 0;
+ td->csum_start = offset;
+ td->csum_write = offset + skb->csum;
+ } else
+ control = BMU_CHECK;
+
+ if (!skb_shinfo(skb)->nr_frags) /* single buffer i.e. no fragments */
+ control |= BMU_EOF| BMU_IRQ_EOF;
+ else {
+ struct skge_tx_desc *tf = td;
+
+ control |= BMU_STFWD;
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+ map = pci_map_page(hw->pdev, frag->page, frag->page_offset,
+ frag->size, PCI_DMA_TODEVICE);
+
+ e = e->next;
+ e->skb = NULL;
+ tf = e->desc;
+ tf->dma_lo = map;
+ tf->dma_hi = (u64) map >> 32;
+ pci_unmap_addr_set(e, mapaddr, map);
+ pci_unmap_len_set(e, maplen, frag->size);
+
+ tf->control = BMU_OWN | BMU_SW | control | frag->size;
+ }
+ tf->control |= BMU_EOF | BMU_IRQ_EOF;
+ }
+ /* Make sure all the descriptors written */
+ wmb();
+ td->control = BMU_OWN | BMU_SW | BMU_STF | control | len;
+ wmb();
+
+ skge_write8(hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_START);
+
+ if (netif_msg_tx_queued(skge))
+ printk(KERN_DEBUG "%s: tx queued, slot %td, len %d\n",
+ dev->name, e - ring->start, skb->len);
+
+ ring->to_use = e->next;
+ skge->tx_avail -= skb_shinfo(skb)->nr_frags + 1;
+ if (skge->tx_avail <= MAX_SKB_FRAGS + 1) {
+ pr_debug("%s: transmit queue full\n", dev->name);
+ netif_stop_queue(dev);
+ }
+
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&skge->tx_lock, flags);
+
+ return NETDEV_TX_OK;
+}
+
+static inline void skge_tx_free(struct skge_hw *hw, struct skge_element *e)
+{
+ if (e->skb) {
+ pci_unmap_single(hw->pdev,
+ pci_unmap_addr(e, mapaddr),
+ pci_unmap_len(e, maplen),
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb_any(e->skb);
+ e->skb = NULL;
+ } else {
+ pci_unmap_page(hw->pdev,
+ pci_unmap_addr(e, mapaddr),
+ pci_unmap_len(e, maplen),
+ PCI_DMA_TODEVICE);
+ }
+}
+
+static void skge_tx_clean(struct skge_port *skge)
+{
+ struct skge_ring *ring = &skge->tx_ring;
+ struct skge_element *e;
+ unsigned long flags;
+
+ spin_lock_irqsave(&skge->tx_lock, flags);
+ for (e = ring->to_clean; e != ring->to_use; e = e->next) {
+ ++skge->tx_avail;
+ skge_tx_free(skge->hw, e);
+ }
+ ring->to_clean = e;
+ spin_unlock_irqrestore(&skge->tx_lock, flags);
+}
+
+static void skge_tx_timeout(struct net_device *dev)
+{
+ struct skge_port *skge = netdev_priv(dev);
+
+ if (netif_msg_timer(skge))
+ printk(KERN_DEBUG PFX "%s: tx timeout\n", dev->name);
+
+ skge_write8(skge->hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_STOP);
+ skge_tx_clean(skge);
+}
+
+static int skge_change_mtu(struct net_device *dev, int new_mtu)
+{
+ int err = 0;
+
+ if(new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
+ return -EINVAL;
+
+ dev->mtu = new_mtu;
+
+ if (netif_running(dev)) {
+ skge_down(dev);
+ skge_up(dev);
+ }
+
+ return err;
+}
+
+static void genesis_set_multicast(struct net_device *dev)
+{
+ struct skge_port *skge = netdev_priv(dev);
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+ int i, count = dev->mc_count;
+ struct dev_mc_list *list = dev->mc_list;
+ u32 mode;
+ u8 filter[8];
+
+ mode = skge_xm_read32(hw, port, XM_MODE);
+ mode |= XM_MD_ENA_HASH;
+ if (dev->flags & IFF_PROMISC)
+ mode |= XM_MD_ENA_PROM;
+ else
+ mode &= ~XM_MD_ENA_PROM;
+
+ if (dev->flags & IFF_ALLMULTI)
+ memset(filter, 0xff, sizeof(filter));
+ else {
+ memset(filter, 0, sizeof(filter));
+ for(i = 0; list && i < count; i++, list = list->next) {
+ u32 crc = crc32_le(~0, list->dmi_addr, ETH_ALEN);
+ u8 bit = 63 - (crc & 63);
+
+ filter[bit/8] |= 1 << (bit%8);
+ }
+ }
+
+ skge_xm_outhash(hw, port, XM_HSM, filter);
+
+ skge_xm_write32(hw, port, XM_MODE, mode);
+}
+
+static void yukon_set_multicast(struct net_device *dev)
+{
+ struct skge_port *skge = netdev_priv(dev);
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+ struct dev_mc_list *list = dev->mc_list;
+ u16 reg;
+ u8 filter[8];
+
+ memset(filter, 0, sizeof(filter));
+
+ reg = skge_gma_read16(hw, port, GM_RX_CTRL);
+ reg |= GM_RXCR_UCF_ENA;
+
+ if (dev->flags & IFF_PROMISC) /* promiscious */
+ reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
+ else if (dev->flags & IFF_ALLMULTI) /* all multicast */
+ memset(filter, 0xff, sizeof(filter));
+ else if (dev->mc_count == 0) /* no multicast */
+ reg &= ~GM_RXCR_MCF_ENA;
+ else {
+ int i;
+ reg |= GM_RXCR_MCF_ENA;
+
+ for(i = 0; list && i < dev->mc_count; i++, list = list->next) {
+ u32 bit = ether_crc(ETH_ALEN, list->dmi_addr) & 0x3f;
+ filter[bit/8] |= 1 << (bit%8);
+ }
+ }
+
+
+ skge_gma_write16(hw, port, GM_MC_ADDR_H1,
+ (u16)filter[0] | ((u16)filter[1] << 8));
+ skge_gma_write16(hw, port, GM_MC_ADDR_H2,
+ (u16)filter[2] | ((u16)filter[3] << 8));
+ skge_gma_write16(hw, port, GM_MC_ADDR_H3,
+ (u16)filter[4] | ((u16)filter[5] << 8));
+ skge_gma_write16(hw, port, GM_MC_ADDR_H4,
+ (u16)filter[6] | ((u16)filter[7] << 8));
+
+ skge_gma_write16(hw, port, GM_RX_CTRL, reg);
+}
+
+static inline int bad_phy_status(const struct skge_hw *hw, u32 status)
+{
+ if (hw->chip_id == CHIP_ID_GENESIS)
+ return (status & (XMR_FS_ERR | XMR_FS_2L_VLAN)) != 0;
+ else
+ return (status & GMR_FS_ANY_ERR) ||
+ (status & GMR_FS_RX_OK) == 0;
+}
+
+static void skge_rx_error(struct skge_port *skge, int slot,
+ u32 control, u32 status)
+{
+ if (netif_msg_rx_err(skge))
+ printk(KERN_DEBUG PFX "%s: rx err, slot %d control 0x%x status 0x%x\n",
+ skge->netdev->name, slot, control, status);
+
+ if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF)
+ || (control & BMU_BBC) > skge->netdev->mtu + VLAN_ETH_HLEN)
+ skge->net_stats.rx_length_errors++;
+ else {
+ if (skge->hw->chip_id == CHIP_ID_GENESIS) {
+ if (status & (XMR_FS_RUNT|XMR_FS_LNG_ERR))
+ skge->net_stats.rx_length_errors++;
+ if (status & XMR_FS_FRA_ERR)
+ skge->net_stats.rx_frame_errors++;
+ if (status & XMR_FS_FCS_ERR)
+ skge->net_stats.rx_crc_errors++;
+ } else {
+ if (status & (GMR_FS_LONG_ERR|GMR_FS_UN_SIZE))
+ skge->net_stats.rx_length_errors++;
+ if (status & GMR_FS_FRAGMENT)
+ skge->net_stats.rx_frame_errors++;
+ if (status & GMR_FS_CRC_ERR)
+ skge->net_stats.rx_crc_errors++;
+ }
+ }
+}
+
+static int skge_poll(struct net_device *dev, int *budget)
+{
+ struct skge_port *skge = netdev_priv(dev);
+ struct skge_hw *hw = skge->hw;
+ struct skge_ring *ring = &skge->rx_ring;
+ struct skge_element *e;
+ unsigned int to_do = min(dev->quota, *budget);
+ unsigned int work_done = 0;
+ int done;
+ static const u32 irqmask[] = { IS_PORT_1, IS_PORT_2 };
+
+ for (e = ring->to_clean; e != ring->to_use && work_done < to_do;
+ e = e->next) {
+ struct skge_rx_desc *rd = e->desc;
+ struct sk_buff *skb = e->skb;
+ u32 control, len, status;
+
+ rmb();
+ control = rd->control;
+ if (control & BMU_OWN)
+ break;
+
+ len = control & BMU_BBC;
+ e->skb = NULL;
+
+ pci_unmap_single(hw->pdev,
+ pci_unmap_addr(e, mapaddr),
+ pci_unmap_len(e, maplen),
+ PCI_DMA_FROMDEVICE);
+
+ status = rd->status;
+ if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF)
+ || len > dev->mtu + VLAN_ETH_HLEN
+ || bad_phy_status(hw, status)) {
+ skge_rx_error(skge, e - ring->start, control, status);
+ dev_kfree_skb(skb);
+ continue;
+ }
+
+ if (netif_msg_rx_status(skge))
+ printk(KERN_DEBUG PFX "%s: rx slot %td status 0x%x len %d\n",
+ dev->name, e - ring->start, rd->status, len);
+
+ skb_put(skb, len);
+ skb->protocol = eth_type_trans(skb, dev);
+
+ if (skge->rx_csum) {
+ skb->csum = le16_to_cpu(rd->csum2);
+ skb->ip_summed = CHECKSUM_HW;
+ }
+
+ dev->last_rx = jiffies;
+ netif_receive_skb(skb);
+
+ ++work_done;
+ }
+ ring->to_clean = e;
+
+ *budget -= work_done;
+ dev->quota -= work_done;
+ done = work_done < to_do;
+
+ if (skge_rx_fill(skge))
+ done = 0;
+
+ /* restart receiver */
+ wmb();
+ skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR),
+ CSR_START | CSR_IRQ_CL_F);
+
+ if (done) {
+ local_irq_disable();
+ hw->intr_mask |= irqmask[skge->port];
+ /* Order is important since data can get interrupted */
+ skge_write32(hw, B0_IMSK, hw->intr_mask);
+ __netif_rx_complete(dev);
+ local_irq_enable();
+ }
+
+ return !done;
+}
+
+static inline void skge_tx_intr(struct net_device *dev)
+{
+ struct skge_port *skge = netdev_priv(dev);
+ struct skge_hw *hw = skge->hw;
+ struct skge_ring *ring = &skge->tx_ring;
+ struct skge_element *e;
+
+ spin_lock(&skge->tx_lock);
+ for(e = ring->to_clean; e != ring->to_use; e = e->next) {
+ struct skge_tx_desc *td = e->desc;
+ u32 control;
+
+ rmb();
+ control = td->control;
+ if (control & BMU_OWN)
+ break;
+
+ if (unlikely(netif_msg_tx_done(skge)))
+ printk(KERN_DEBUG PFX "%s: tx done slot %td status 0x%x\n",
+ dev->name, e - ring->start, td->status);
+
+ skge_tx_free(hw, e);
+ e->skb = NULL;
+ ++skge->tx_avail;
+ }
+ ring->to_clean = e;
+ skge_write8(hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_IRQ_CL_F);
+
+ if (skge->tx_avail > MAX_SKB_FRAGS + 1)
+ netif_wake_queue(dev);
+
+ spin_unlock(&skge->tx_lock);
+}
+
+static void skge_mac_parity(struct skge_hw *hw, int port)
+{
+ printk(KERN_ERR PFX "%s: mac data parity error\n",
+ hw->dev[port] ? hw->dev[port]->name
+ : (port == 0 ? "(port A)": "(port B"));
+
+ if (hw->chip_id == CHIP_ID_GENESIS)
+ skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1),
+ MFF_CLR_PERR);
+ else
+ /* HW-Bug #8: cleared by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE */
+ skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T),
+ (hw->chip_id == CHIP_ID_YUKON && chip_rev(hw) == 0)
+ ? GMF_CLI_TX_FC : GMF_CLI_TX_PE);
+}
+
+static void skge_pci_clear(struct skge_hw *hw)
+{
+ u16 status;
+
+ status = skge_read16(hw, SKGEPCI_REG(PCI_STATUS));
+ skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ skge_write16(hw, SKGEPCI_REG(PCI_STATUS),
+ status | PCI_STATUS_ERROR_BITS);
+ skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+}
+
+static void skge_mac_intr(struct skge_hw *hw, int port)
+{
+ if (hw->chip_id == CHIP_ID_GENESIS)
+ genesis_mac_intr(hw, port);
+ else
+ yukon_mac_intr(hw, port);
+}
+
+/* Handle device specific framing and timeout interrupts */
+static void skge_error_irq(struct skge_hw *hw)
+{
+ u32 hwstatus = skge_read32(hw, B0_HWE_ISRC);
+
+ if (hw->chip_id == CHIP_ID_GENESIS) {
+ /* clear xmac errors */
+ if (hwstatus & (IS_NO_STAT_M1|IS_NO_TIST_M1))
+ skge_write16(hw, SKGEMAC_REG(0, RX_MFF_CTRL1), MFF_CLR_INSTAT);
+ if (hwstatus & (IS_NO_STAT_M2|IS_NO_TIST_M2))
+ skge_write16(hw, SKGEMAC_REG(0, RX_MFF_CTRL2), MFF_CLR_INSTAT);
+ } else {
+ /* Timestamp (unused) overflow */
+ if (hwstatus & IS_IRQ_TIST_OV)
+ skge_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
+
+ if (hwstatus & IS_IRQ_SENSOR) {
+ /* no sensors on 32-bit Yukon */
+ if (!(skge_read16(hw, B0_CTST) & CS_BUS_SLOT_SZ)) {
+ printk(KERN_ERR PFX "ignoring bogus sensor interrups\n");
+ skge_write32(hw, B0_HWE_IMSK,
+ IS_ERR_MSK & ~IS_IRQ_SENSOR);
+ } else
+ printk(KERN_WARNING PFX "sensor interrupt\n");
+ }
+
+
+ }
+
+ if (hwstatus & IS_RAM_RD_PAR) {
+ printk(KERN_ERR PFX "Ram read data parity error\n");
+ skge_write16(hw, B3_RI_CTRL, RI_CLR_RD_PERR);
+ }
+
+ if (hwstatus & IS_RAM_WR_PAR) {
+ printk(KERN_ERR PFX "Ram write data parity error\n");
+ skge_write16(hw, B3_RI_CTRL, RI_CLR_WR_PERR);
+ }
+
+ if (hwstatus & IS_M1_PAR_ERR)
+ skge_mac_parity(hw, 0);
+
+ if (hwstatus & IS_M2_PAR_ERR)
+ skge_mac_parity(hw, 1);
+
+ if (hwstatus & IS_R1_PAR_ERR)
+ skge_write32(hw, B0_R1_CSR, CSR_IRQ_CL_P);
+
+ if (hwstatus & IS_R2_PAR_ERR)
+ skge_write32(hw, B0_R2_CSR, CSR_IRQ_CL_P);
+
+ if (hwstatus & (IS_IRQ_MST_ERR|IS_IRQ_STAT)) {
+ printk(KERN_ERR PFX "hardware error detected (status 0x%x)\n",
+ hwstatus);
+
+ skge_pci_clear(hw);
+
+ hwstatus = skge_read32(hw, B0_HWE_ISRC);
+ if (hwstatus & IS_IRQ_STAT) {
+ printk(KERN_WARNING PFX "IRQ status %x: still set ignoring hardware errors\n",
+ hwstatus);
+ hw->intr_mask &= ~IS_HW_ERR;
+ }
+ }
+}
+
+/*
+ * Interrrupt from PHY are handled in tasklet (soft irq)
+ * because accessing phy registers requires spin wait which might
+ * cause excess interrupt latency.
+ */
+static void skge_extirq(unsigned long data)
+{
+ struct skge_hw *hw = (struct skge_hw *) data;
+ int port;
+
+ spin_lock(&hw->phy_lock);
+ for (port = 0; port < 2; port++) {
+ struct net_device *dev = hw->dev[port];
+
+ if (dev && netif_running(dev)) {
+ struct skge_port *skge = netdev_priv(dev);
+
+ if (hw->chip_id != CHIP_ID_GENESIS)
+ yukon_phy_intr(skge);
+ else if (hw->phy_type == SK_PHY_BCOM)
+ genesis_bcom_intr(skge);
+ }
+ }
+ spin_unlock(&hw->phy_lock);
+
+ local_irq_disable();
+ hw->intr_mask |= IS_EXT_REG;
+ skge_write32(hw, B0_IMSK, hw->intr_mask);
+ local_irq_enable();
+}
+
+static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct skge_hw *hw = dev_id;
+ u32 status = skge_read32(hw, B0_SP_ISRC);
+
+ if (status == 0 || status == ~0) /* hotplug or shared irq */
+ return IRQ_NONE;
+
+ status &= hw->intr_mask;
+
+ if ((status & IS_R1_F) && netif_rx_schedule_prep(hw->dev[0])) {
+ status &= ~IS_R1_F;
+ hw->intr_mask &= ~IS_R1_F;
+ skge_write32(hw, B0_IMSK, hw->intr_mask);
+ __netif_rx_schedule(hw->dev[0]);
+ }
+
+ if ((status & IS_R2_F) && netif_rx_schedule_prep(hw->dev[1])) {
+ status &= ~IS_R2_F;
+ hw->intr_mask &= ~IS_R2_F;
+ skge_write32(hw, B0_IMSK, hw->intr_mask);
+ __netif_rx_schedule(hw->dev[1]);
+ }
+
+ if (status & IS_XA1_F)
+ skge_tx_intr(hw->dev[0]);
+
+ if (status & IS_XA2_F)
+ skge_tx_intr(hw->dev[1]);
+
+ if (status & IS_MAC1)
+ skge_mac_intr(hw, 0);
+
+ if (status & IS_MAC2)
+ skge_mac_intr(hw, 1);
+
+ if (status & IS_HW_ERR)
+ skge_error_irq(hw);
+
+ if (status & IS_EXT_REG) {
+ hw->intr_mask &= ~IS_EXT_REG;
+ tasklet_schedule(&hw->ext_tasklet);
+ }
+
+ if (status)
+ skge_write32(hw, B0_IMSK, hw->intr_mask);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void skge_netpoll(struct net_device *dev)
+{
+ struct skge_port *skge = netdev_priv(dev);
+
+ disable_irq(dev->irq);
+ skge_intr(dev->irq, skge->hw, NULL);
+ enable_irq(dev->irq);
+}
+#endif
+
+static int skge_set_mac_address(struct net_device *dev, void *p)
+{
+ struct skge_port *skge = netdev_priv(dev);
+ struct sockaddr *addr = p;
+ int err = 0;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ skge_down(dev);
+ memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
+ memcpy_toio(skge->hw->regs + B2_MAC_1 + skge->port*8,
+ dev->dev_addr, ETH_ALEN);
+ memcpy_toio(skge->hw->regs + B2_MAC_2 + skge->port*8,
+ dev->dev_addr, ETH_ALEN);
+ if (dev->flags & IFF_UP)
+ err = skge_up(dev);
+ return err;
+}
+
+static const struct {
+ u8 id;
+ const char *name;
+} skge_chips[] = {
+ { CHIP_ID_GENESIS, "Genesis" },
+ { CHIP_ID_YUKON, "Yukon" },
+ { CHIP_ID_YUKON_LITE, "Yukon-Lite"},
+ { CHIP_ID_YUKON_LP, "Yukon-LP"},
+ { CHIP_ID_YUKON_XL, "Yukon-2 XL"},
+ { CHIP_ID_YUKON_EC, "YUKON-2 EC"},
+ { CHIP_ID_YUKON_FE, "YUKON-2 FE"},
+};
+
+static const char *skge_board_name(const struct skge_hw *hw)
+{
+ int i;
+ static char buf[16];
+
+ for (i = 0; i < ARRAY_SIZE(skge_chips); i++)
+ if (skge_chips[i].id == hw->chip_id)
+ return skge_chips[i].name;
+
+ snprintf(buf, sizeof buf, "chipid 0x%x", hw->chip_id);
+ return buf;
+}
+
+
+/*
+ * Setup the board data structure, but don't bring up
+ * the port(s)
+ */
+static int skge_reset(struct skge_hw *hw)
+{
+ u16 ctst;
+ u8 t8;
+ int i, ports;
+
+ ctst = skge_read16(hw, B0_CTST);
+
+ /* do a SW reset */
+ skge_write8(hw, B0_CTST, CS_RST_SET);
+ skge_write8(hw, B0_CTST, CS_RST_CLR);
+
+ /* clear PCI errors, if any */
+ skge_pci_clear(hw);
+
+ skge_write8(hw, B0_CTST, CS_MRST_CLR);
+
+ /* restore CLK_RUN bits (for Yukon-Lite) */
+ skge_write16(hw, B0_CTST,
+ ctst & (CS_CLK_RUN_HOT|CS_CLK_RUN_RST|CS_CLK_RUN_ENA));
+
+ hw->chip_id = skge_read8(hw, B2_CHIP_ID);
+ hw->phy_type = skge_read8(hw, B2_E_1) & 0xf;
+ hw->pmd_type = skge_read8(hw, B2_PMD_TYP);
+
+ switch(hw->chip_id) {
+ case CHIP_ID_GENESIS:
+ switch (hw->phy_type) {
+ case SK_PHY_XMAC:
+ hw->phy_addr = PHY_ADDR_XMAC;
+ break;
+ case SK_PHY_BCOM:
+ hw->phy_addr = PHY_ADDR_BCOM;
+ break;
+ default:
+ printk(KERN_ERR PFX "%s: unsupported phy type 0x%x\n",
+ pci_name(hw->pdev), hw->phy_type);
+ return -EOPNOTSUPP;
+ }
+ break;
+
+ case CHIP_ID_YUKON:
+ case CHIP_ID_YUKON_LITE:
+ case CHIP_ID_YUKON_LP:
+ if (hw->phy_type < SK_PHY_MARV_COPPER && hw->pmd_type != 'S')
+ hw->phy_type = SK_PHY_MARV_COPPER;
+
+ hw->phy_addr = PHY_ADDR_MARV;
+ if (!iscopper(hw))
+ hw->phy_type = SK_PHY_MARV_FIBER;
+
+ break;
+
+ default:
+ printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n",
+ pci_name(hw->pdev), hw->chip_id);
+ return -EOPNOTSUPP;
+ }
+
+ hw->mac_cfg = skge_read8(hw, B2_MAC_CFG);
+ ports = isdualport(hw) ? 2 : 1;
+
+ /* read the adapters RAM size */
+ t8 = skge_read8(hw, B2_E_0);
+ if (hw->chip_id == CHIP_ID_GENESIS) {
+ if (t8 == 3) {
+ /* special case: 4 x 64k x 36, offset = 0x80000 */
+ hw->ram_size = 0x100000;
+ hw->ram_offset = 0x80000;
+ } else
+ hw->ram_size = t8 * 512;
+ }
+ else if (t8 == 0)
+ hw->ram_size = 0x20000;
+ else
+ hw->ram_size = t8 * 4096;
+
+ if (hw->chip_id == CHIP_ID_GENESIS)
+ genesis_init(hw);
+ else {
+ /* switch power to VCC (WA for VAUX problem) */
+ skge_write8(hw, B0_POWER_CTRL,
+ PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
+ for (i = 0; i < ports; i++) {
+ skge_write16(hw, SKGEMAC_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
+ skge_write16(hw, SKGEMAC_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
+ }
+ }
+
+ /* turn off hardware timer (unused) */
+ skge_write8(hw, B2_TI_CTRL, TIM_STOP);
+ skge_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ);
+ skge_write8(hw, B0_LED, LED_STAT_ON);
+
+ /* enable the Tx Arbiters */
+ for (i = 0; i < ports; i++)
+ skge_write8(hw, SKGEMAC_REG(i, TXA_CTRL), TXA_ENA_ARB);
+
+ /* Initialize ram interface */
+ skge_write16(hw, B3_RI_CTRL, RI_RST_CLR);
+
+ skge_write8(hw, B3_RI_WTO_R1, SK_RI_TO_53);
+ skge_write8(hw, B3_RI_WTO_XA1, SK_RI_TO_53);
+ skge_write8(hw, B3_RI_WTO_XS1, SK_RI_TO_53);
+ skge_write8(hw, B3_RI_RTO_R1, SK_RI_TO_53);
+ skge_write8(hw, B3_RI_RTO_XA1, SK_RI_TO_53);
+ skge_write8(hw, B3_RI_RTO_XS1, SK_RI_TO_53);
+ skge_write8(hw, B3_RI_WTO_R2, SK_RI_TO_53);
+ skge_write8(hw, B3_RI_WTO_XA2, SK_RI_TO_53);
+ skge_write8(hw, B3_RI_WTO_XS2, SK_RI_TO_53);
+ skge_write8(hw, B3_RI_RTO_R2, SK_RI_TO_53);
+ skge_write8(hw, B3_RI_RTO_XA2, SK_RI_TO_53);
+ skge_write8(hw, B3_RI_RTO_XS2, SK_RI_TO_53);
+
+ skge_write32(hw, B0_HWE_IMSK, IS_ERR_MSK);
+
+ /* Set interrupt moderation for Transmit only
+ * Receive interrupts avoided by NAPI
+ */
+ skge_write32(hw, B2_IRQM_MSK, IS_XA1_F|IS_XA2_F);
+ skge_write32(hw, B2_IRQM_INI, skge_usecs2clk(hw, 100));
+ skge_write32(hw, B2_IRQM_CTRL, TIM_START);
+
+ hw->intr_mask = IS_HW_ERR | IS_EXT_REG | IS_PORT_1;
+ if (isdualport(hw))
+ hw->intr_mask |= IS_PORT_2;
+ skge_write32(hw, B0_IMSK, hw->intr_mask);
+
+ if (hw->chip_id != CHIP_ID_GENESIS)
+ skge_write8(hw, GMAC_IRQ_MSK, 0);
+
+ spin_lock_bh(&hw->phy_lock);
+ for (i = 0; i < ports; i++) {
+ if (hw->chip_id == CHIP_ID_GENESIS)
+ genesis_reset(hw, i);
+ else
+ yukon_reset(hw, i);
+ }
+ spin_unlock_bh(&hw->phy_lock);
+
+ return 0;
+}
+
+/* Initialize network device */
+static struct net_device *skge_devinit(struct skge_hw *hw, int port)
+{
+ struct skge_port *skge;
+ struct net_device *dev = alloc_etherdev(sizeof(*skge));
+
+ if (!dev) {
+ printk(KERN_ERR "skge etherdev alloc failed");
+ return NULL;
+ }
+
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &hw->pdev->dev);
+ dev->open = skge_up;
+ dev->stop = skge_down;
+ dev->hard_start_xmit = skge_xmit_frame;
+ dev->get_stats = skge_get_stats;
+ if (hw->chip_id == CHIP_ID_GENESIS)
+ dev->set_multicast_list = genesis_set_multicast;
+ else
+ dev->set_multicast_list = yukon_set_multicast;
+
+ dev->set_mac_address = skge_set_mac_address;
+ dev->change_mtu = skge_change_mtu;
+ SET_ETHTOOL_OPS(dev, &skge_ethtool_ops);
+ dev->tx_timeout = skge_tx_timeout;
+ dev->watchdog_timeo = TX_WATCHDOG;
+ dev->poll = skge_poll;
+ dev->weight = NAPI_WEIGHT;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = skge_netpoll;
+#endif
+ dev->irq = hw->pdev->irq;
+ dev->features = NETIF_F_LLTX;
+
+ skge = netdev_priv(dev);
+ skge->netdev = dev;
+ skge->hw = hw;
+ skge->msg_enable = netif_msg_init(debug, default_msg);
+ skge->tx_ring.count = DEFAULT_TX_RING_SIZE;
+ skge->rx_ring.count = DEFAULT_RX_RING_SIZE;
+
+ /* Auto speed and flow control */
+ skge->autoneg = AUTONEG_ENABLE;
+ skge->flow_control = FLOW_MODE_SYMMETRIC;
+ skge->duplex = -1;
+ skge->speed = -1;
+ skge->advertising = skge_modes(hw);
+
+ hw->dev[port] = dev;
+
+ skge->port = port;
+
+ spin_lock_init(&skge->tx_lock);
+
+ init_timer(&skge->link_check);
+ skge->link_check.function = skge_link_timer;
+ skge->link_check.data = (unsigned long) skge;
+
+ init_timer(&skge->led_blink);
+ skge->led_blink.function = skge_blink_timer;
+ skge->led_blink.data = (unsigned long) skge;
+
+ if (hw->chip_id != CHIP_ID_GENESIS) {
+ dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
+ skge->rx_csum = 1;
+ }
+
+ /* read the mac address */
+ memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port*8, ETH_ALEN);
+
+ /* device is off until link detection */
+ netif_carrier_off(dev);
+ netif_stop_queue(dev);
+
+ return dev;
+}
+
+static void __devinit skge_show_addr(struct net_device *dev)
+{
+ const struct skge_port *skge = netdev_priv(dev);
+
+ if (netif_msg_probe(skge))
+ printk(KERN_INFO PFX "%s: addr %02x:%02x:%02x:%02x:%02x:%02x\n",
+ dev->name,
+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
+}
+
+static int __devinit skge_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev, *dev1;
+ struct skge_hw *hw;
+ int err, using_dac = 0;
+
+ if ((err = pci_enable_device(pdev))) {
+ printk(KERN_ERR PFX "%s cannot enable PCI device\n",
+ pci_name(pdev));
+ goto err_out;
+ }
+
+ if ((err = pci_request_regions(pdev, DRV_NAME))) {
+ printk(KERN_ERR PFX "%s cannot obtain PCI resources\n",
+ pci_name(pdev));
+ goto err_out_disable_pdev;
+ }
+
+ pci_set_master(pdev);
+
+ if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)))
+ using_dac = 1;
+ else if (!(err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
+ printk(KERN_ERR PFX "%s no usable DMA configuration\n",
+ pci_name(pdev));
+ goto err_out_free_regions;
+ }
+
+#ifdef __BIG_ENDIAN
+ /* byte swap decriptors in hardware */
+ {
+ u32 reg;
+
+ pci_read_config_dword(pdev, PCI_DEV_REG2, &reg);
+ reg |= PCI_REV_DESC;
+ pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
+ }
+#endif
+
+ err = -ENOMEM;
+ hw = kmalloc(sizeof(*hw), GFP_KERNEL);
+ if (!hw) {
+ printk(KERN_ERR PFX "%s: cannot allocate hardware struct\n",
+ pci_name(pdev));
+ goto err_out_free_regions;
+ }
+
+ memset(hw, 0, sizeof(*hw));
+ hw->pdev = pdev;
+ spin_lock_init(&hw->phy_lock);
+ tasklet_init(&hw->ext_tasklet, skge_extirq, (unsigned long) hw);
+
+ hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
+ if (!hw->regs) {
+ printk(KERN_ERR PFX "%s: cannot map device registers\n",
+ pci_name(pdev));
+ goto err_out_free_hw;
+ }
+
+ if ((err = request_irq(pdev->irq, skge_intr, SA_SHIRQ, DRV_NAME, hw))) {
+ printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
+ pci_name(pdev), pdev->irq);
+ goto err_out_iounmap;
+ }
+ pci_set_drvdata(pdev, hw);
+
+ err = skge_reset(hw);
+ if (err)
+ goto err_out_free_irq;
+
+ printk(KERN_INFO PFX "addr 0x%lx irq %d chip %s rev %d\n",
+ pci_resource_start(pdev, 0), pdev->irq,
+ skge_board_name(hw), chip_rev(hw));
+
+ if ((dev = skge_devinit(hw, 0)) == NULL)
+ goto err_out_led_off;
+
+ if (using_dac)
+ dev->features |= NETIF_F_HIGHDMA;
+
+ if ((err = register_netdev(dev))) {
+ printk(KERN_ERR PFX "%s: cannot register net device\n",
+ pci_name(pdev));
+ goto err_out_free_netdev;
+ }
+
+ skge_show_addr(dev);
+
+ if (isdualport(hw) && (dev1 = skge_devinit(hw, 1))) {
+ if (using_dac)
+ dev1->features |= NETIF_F_HIGHDMA;
+
+ if (register_netdev(dev1) == 0)
+ skge_show_addr(dev1);
+ else {
+ /* Failure to register second port need not be fatal */
+ printk(KERN_WARNING PFX "register of second port failed\n");
+ hw->dev[1] = NULL;
+ free_netdev(dev1);
+ }
+ }
+
+ return 0;
+
+err_out_free_netdev:
+ free_netdev(dev);
+err_out_led_off:
+ skge_write16(hw, B0_LED, LED_STAT_OFF);
+err_out_free_irq:
+ free_irq(pdev->irq, hw);
+err_out_iounmap:
+ iounmap(hw->regs);
+err_out_free_hw:
+ kfree(hw);
+err_out_free_regions:
+ pci_release_regions(pdev);
+err_out_disable_pdev:
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+err_out:
+ return err;
+}
+
+static void __devexit skge_remove(struct pci_dev *pdev)
+{
+ struct skge_hw *hw = pci_get_drvdata(pdev);
+ struct net_device *dev0, *dev1;
+
+ if(!hw)
+ return;
+
+ if ((dev1 = hw->dev[1]))
+ unregister_netdev(dev1);
+ dev0 = hw->dev[0];
+ unregister_netdev(dev0);
+
+ tasklet_kill(&hw->ext_tasklet);
+
+ free_irq(pdev->irq, hw);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ if (dev1)
+ free_netdev(dev1);
+ free_netdev(dev0);
+ skge_write16(hw, B0_LED, LED_STAT_OFF);
+ iounmap(hw->regs);
+ kfree(hw);
+ pci_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+static int skge_suspend(struct pci_dev *pdev, u32 state)
+{
+ struct skge_hw *hw = pci_get_drvdata(pdev);
+ int i, wol = 0;
+
+ for(i = 0; i < 2; i++) {
+ struct net_device *dev = hw->dev[i];
+
+ if (dev) {
+ struct skge_port *skge = netdev_priv(dev);
+ if (netif_running(dev)) {
+ netif_carrier_off(dev);
+ skge_down(dev);
+ }
+ netif_device_detach(dev);
+ wol |= skge->wol;
+ }
+ }
+
+ pci_save_state(pdev);
+ pci_enable_wake(pdev, state, wol);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+static int skge_resume(struct pci_dev *pdev)
+{
+ struct skge_hw *hw = pci_get_drvdata(pdev);
+ int i;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_wake(pdev, PCI_D0, 0);
+
+ skge_reset(hw);
+
+ for(i = 0; i < 2; i++) {
+ struct net_device *dev = hw->dev[i];
+ if (dev) {
+ netif_device_attach(dev);
+ if(netif_running(dev))
+ skge_up(dev);
+ }
+ }
+ return 0;
+}
+#endif
+
+static struct pci_driver skge_driver = {
+ .name = DRV_NAME,
+ .id_table = skge_id_table,
+ .probe = skge_probe,
+ .remove = __devexit_p(skge_remove),
+#ifdef CONFIG_PM
+ .suspend = skge_suspend,
+ .resume = skge_resume,
+#endif
+};
+
+static int __init skge_init_module(void)
+{
+ return pci_module_init(&skge_driver);
+}
+
+static void __exit skge_cleanup_module(void)
+{
+ pci_unregister_driver(&skge_driver);
+}
+
+module_init(skge_init_module);
+module_exit(skge_cleanup_module);
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
new file mode 100644
index 00000000000..36c62b68fab
--- /dev/null
+++ b/drivers/net/skge.h
@@ -0,0 +1,3005 @@
+/*
+ * Definitions for the new Marvell Yukon / SysKonenct driver.
+ */
+#ifndef _SKGE_H
+#define _SKGE_H
+
+/* PCI config registers */
+#define PCI_DEV_REG1 0x40
+#define PCI_DEV_REG2 0x44
+#ifndef PCI_VPD
+#define PCI_VPD 0x50
+#endif
+
+/* PCI_OUR_REG_2 32 bit Our Register 2 */
+enum {
+ PCI_VPD_WR_THR = 0xff<<24, /* Bit 31..24: VPD Write Threshold */
+ PCI_DEV_SEL = 0x7f<<17, /* Bit 23..17: EEPROM Device Select */
+ PCI_VPD_ROM_SZ = 7 <<14, /* Bit 16..14: VPD ROM Size */
+ /* Bit 13..12: reserved */
+ PCI_EN_DUMMY_RD = 1<<3, /* Enable Dummy Read */
+ PCI_REV_DESC = 1<<2, /* Reverse Desc. Bytes */
+ PCI_USEDATA64 = 1<<0, /* Use 64Bit Data bus ext */
+};
+
+/* PCI_VPD_ADR_REG 16 bit VPD Address Register */
+enum {
+ PCI_VPD_FLAG = 1<<15, /* starts VPD rd/wr cycle */
+ PCI_VPD_ADR_MSK =0x7fffL, /* Bit 14.. 0: VPD Address Mask */
+ VPD_RES_ID = 0x82,
+ VPD_RES_READ = 0x90,
+ VPD_RES_WRITE = 0x81,
+ VPD_RES_END = 0x78,
+};
+
+
+#define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \
+ PCI_STATUS_SIG_SYSTEM_ERROR | \
+ PCI_STATUS_REC_MASTER_ABORT | \
+ PCI_STATUS_REC_TARGET_ABORT | \
+ PCI_STATUS_PARITY)
+
+
+enum csr_regs {
+ B0_RAP = 0x0000,
+ B0_CTST = 0x0004,
+ B0_LED = 0x0006,
+ B0_POWER_CTRL = 0x0007,
+ B0_ISRC = 0x0008,
+ B0_IMSK = 0x000c,
+ B0_HWE_ISRC = 0x0010,
+ B0_HWE_IMSK = 0x0014,
+ B0_SP_ISRC = 0x0018,
+ B0_XM1_IMSK = 0x0020,
+ B0_XM1_ISRC = 0x0028,
+ B0_XM1_PHY_ADDR = 0x0030,
+ B0_XM1_PHY_DATA = 0x0034,
+ B0_XM2_IMSK = 0x0040,
+ B0_XM2_ISRC = 0x0048,
+ B0_XM2_PHY_ADDR = 0x0050,
+ B0_XM2_PHY_DATA = 0x0054,
+ B0_R1_CSR = 0x0060,
+ B0_R2_CSR = 0x0064,
+ B0_XS1_CSR = 0x0068,
+ B0_XA1_CSR = 0x006c,
+ B0_XS2_CSR = 0x0070,
+ B0_XA2_CSR = 0x0074,
+
+ B2_MAC_1 = 0x0100,
+ B2_MAC_2 = 0x0108,
+ B2_MAC_3 = 0x0110,
+ B2_CONN_TYP = 0x0118,
+ B2_PMD_TYP = 0x0119,
+ B2_MAC_CFG = 0x011a,
+ B2_CHIP_ID = 0x011b,
+ B2_E_0 = 0x011c,
+ B2_E_1 = 0x011d,
+ B2_E_2 = 0x011e,
+ B2_E_3 = 0x011f,
+ B2_FAR = 0x0120,
+ B2_FDP = 0x0124,
+ B2_LD_CTRL = 0x0128,
+ B2_LD_TEST = 0x0129,
+ B2_TI_INI = 0x0130,
+ B2_TI_VAL = 0x0134,
+ B2_TI_CTRL = 0x0138,
+ B2_TI_TEST = 0x0139,
+ B2_IRQM_INI = 0x0140,
+ B2_IRQM_VAL = 0x0144,
+ B2_IRQM_CTRL = 0x0148,
+ B2_IRQM_TEST = 0x0149,
+ B2_IRQM_MSK = 0x014c,
+ B2_IRQM_HWE_MSK = 0x0150,
+ B2_TST_CTRL1 = 0x0158,
+ B2_TST_CTRL2 = 0x0159,
+ B2_GP_IO = 0x015c,
+ B2_I2C_CTRL = 0x0160,
+ B2_I2C_DATA = 0x0164,
+ B2_I2C_IRQ = 0x0168,
+ B2_I2C_SW = 0x016c,
+ B2_BSC_INI = 0x0170,
+ B2_BSC_VAL = 0x0174,
+ B2_BSC_CTRL = 0x0178,
+ B2_BSC_STAT = 0x0179,
+ B2_BSC_TST = 0x017a,
+
+ B3_RAM_ADDR = 0x0180,
+ B3_RAM_DATA_LO = 0x0184,
+ B3_RAM_DATA_HI = 0x0188,
+ B3_RI_WTO_R1 = 0x0190,
+ B3_RI_WTO_XA1 = 0x0191,
+ B3_RI_WTO_XS1 = 0x0192,
+ B3_RI_RTO_R1 = 0x0193,
+ B3_RI_RTO_XA1 = 0x0194,
+ B3_RI_RTO_XS1 = 0x0195,
+ B3_RI_WTO_R2 = 0x0196,
+ B3_RI_WTO_XA2 = 0x0197,
+ B3_RI_WTO_XS2 = 0x0198,
+ B3_RI_RTO_R2 = 0x0199,
+ B3_RI_RTO_XA2 = 0x019a,
+ B3_RI_RTO_XS2 = 0x019b,
+ B3_RI_TO_VAL = 0x019c,
+ B3_RI_CTRL = 0x01a0,
+ B3_RI_TEST = 0x01a2,
+ B3_MA_TOINI_RX1 = 0x01b0,
+ B3_MA_TOINI_RX2 = 0x01b1,
+ B3_MA_TOINI_TX1 = 0x01b2,
+ B3_MA_TOINI_TX2 = 0x01b3,
+ B3_MA_TOVAL_RX1 = 0x01b4,
+ B3_MA_TOVAL_RX2 = 0x01b5,
+ B3_MA_TOVAL_TX1 = 0x01b6,
+ B3_MA_TOVAL_TX2 = 0x01b7,
+ B3_MA_TO_CTRL = 0x01b8,
+ B3_MA_TO_TEST = 0x01ba,
+ B3_MA_RCINI_RX1 = 0x01c0,
+ B3_MA_RCINI_RX2 = 0x01c1,
+ B3_MA_RCINI_TX1 = 0x01c2,
+ B3_MA_RCINI_TX2 = 0x01c3,
+ B3_MA_RCVAL_RX1 = 0x01c4,
+ B3_MA_RCVAL_RX2 = 0x01c5,
+ B3_MA_RCVAL_TX1 = 0x01c6,
+ B3_MA_RCVAL_TX2 = 0x01c7,
+ B3_MA_RC_CTRL = 0x01c8,
+ B3_MA_RC_TEST = 0x01ca,
+ B3_PA_TOINI_RX1 = 0x01d0,
+ B3_PA_TOINI_RX2 = 0x01d4,
+ B3_PA_TOINI_TX1 = 0x01d8,
+ B3_PA_TOINI_TX2 = 0x01dc,
+ B3_PA_TOVAL_RX1 = 0x01e0,
+ B3_PA_TOVAL_RX2 = 0x01e4,
+ B3_PA_TOVAL_TX1 = 0x01e8,
+ B3_PA_TOVAL_TX2 = 0x01ec,
+ B3_PA_CTRL = 0x01f0,
+ B3_PA_TEST = 0x01f2,
+};
+
+/* B0_CTST 16 bit Control/Status register */
+enum {
+ CS_CLK_RUN_HOT = 1<<13,/* CLK_RUN hot m. (YUKON-Lite only) */
+ CS_CLK_RUN_RST = 1<<12,/* CLK_RUN reset (YUKON-Lite only) */
+ CS_CLK_RUN_ENA = 1<<11,/* CLK_RUN enable (YUKON-Lite only) */
+ CS_VAUX_AVAIL = 1<<10,/* VAUX available (YUKON only) */
+ CS_BUS_CLOCK = 1<<9, /* Bus Clock 0/1 = 33/66 MHz */
+ CS_BUS_SLOT_SZ = 1<<8, /* Slot Size 0/1 = 32/64 bit slot */
+ CS_ST_SW_IRQ = 1<<7, /* Set IRQ SW Request */
+ CS_CL_SW_IRQ = 1<<6, /* Clear IRQ SW Request */
+ CS_STOP_DONE = 1<<5, /* Stop Master is finished */
+ CS_STOP_MAST = 1<<4, /* Command Bit to stop the master */
+ CS_MRST_CLR = 1<<3, /* Clear Master reset */
+ CS_MRST_SET = 1<<2, /* Set Master reset */
+ CS_RST_CLR = 1<<1, /* Clear Software reset */
+ CS_RST_SET = 1, /* Set Software reset */
+
+/* B0_LED 8 Bit LED register */
+/* Bit 7.. 2: reserved */
+ LED_STAT_ON = 1<<1, /* Status LED on */
+ LED_STAT_OFF = 1, /* Status LED off */
+
+/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */
+ PC_VAUX_ENA = 1<<7, /* Switch VAUX Enable */
+ PC_VAUX_DIS = 1<<6, /* Switch VAUX Disable */
+ PC_VCC_ENA = 1<<5, /* Switch VCC Enable */
+ PC_VCC_DIS = 1<<4, /* Switch VCC Disable */
+ PC_VAUX_ON = 1<<3, /* Switch VAUX On */
+ PC_VAUX_OFF = 1<<2, /* Switch VAUX Off */
+ PC_VCC_ON = 1<<1, /* Switch VCC On */
+ PC_VCC_OFF = 1<<0, /* Switch VCC Off */
+};
+
+/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */
+enum {
+ IS_ALL_MSK = 0xbffffffful, /* All Interrupt bits */
+ IS_HW_ERR = 1<<31, /* Interrupt HW Error */
+ /* Bit 30: reserved */
+ IS_PA_TO_RX1 = 1<<29, /* Packet Arb Timeout Rx1 */
+ IS_PA_TO_RX2 = 1<<28, /* Packet Arb Timeout Rx2 */
+ IS_PA_TO_TX1 = 1<<27, /* Packet Arb Timeout Tx1 */
+ IS_PA_TO_TX2 = 1<<26, /* Packet Arb Timeout Tx2 */
+ IS_I2C_READY = 1<<25, /* IRQ on end of I2C Tx */
+ IS_IRQ_SW = 1<<24, /* SW forced IRQ */
+ IS_EXT_REG = 1<<23, /* IRQ from LM80 or PHY (GENESIS only) */
+ /* IRQ from PHY (YUKON only) */
+ IS_TIMINT = 1<<22, /* IRQ from Timer */
+ IS_MAC1 = 1<<21, /* IRQ from MAC 1 */
+ IS_LNK_SYNC_M1 = 1<<20, /* Link Sync Cnt wrap MAC 1 */
+ IS_MAC2 = 1<<19, /* IRQ from MAC 2 */
+ IS_LNK_SYNC_M2 = 1<<18, /* Link Sync Cnt wrap MAC 2 */
+/* Receive Queue 1 */
+ IS_R1_B = 1<<17, /* Q_R1 End of Buffer */
+ IS_R1_F = 1<<16, /* Q_R1 End of Frame */
+ IS_R1_C = 1<<15, /* Q_R1 Encoding Error */
+/* Receive Queue 2 */
+ IS_R2_B = 1<<14, /* Q_R2 End of Buffer */
+ IS_R2_F = 1<<13, /* Q_R2 End of Frame */
+ IS_R2_C = 1<<12, /* Q_R2 Encoding Error */
+/* Synchronous Transmit Queue 1 */
+ IS_XS1_B = 1<<11, /* Q_XS1 End of Buffer */
+ IS_XS1_F = 1<<10, /* Q_XS1 End of Frame */
+ IS_XS1_C = 1<<9, /* Q_XS1 Encoding Error */
+/* Asynchronous Transmit Queue 1 */
+ IS_XA1_B = 1<<8, /* Q_XA1 End of Buffer */
+ IS_XA1_F = 1<<7, /* Q_XA1 End of Frame */
+ IS_XA1_C = 1<<6, /* Q_XA1 Encoding Error */
+/* Synchronous Transmit Queue 2 */
+ IS_XS2_B = 1<<5, /* Q_XS2 End of Buffer */
+ IS_XS2_F = 1<<4, /* Q_XS2 End of Frame */
+ IS_XS2_C = 1<<3, /* Q_XS2 Encoding Error */
+/* Asynchronous Transmit Queue 2 */
+ IS_XA2_B = 1<<2, /* Q_XA2 End of Buffer */
+ IS_XA2_F = 1<<1, /* Q_XA2 End of Frame */
+ IS_XA2_C = 1<<0, /* Q_XA2 Encoding Error */
+
+ IS_PORT_1 = IS_XA1_F| IS_R1_F| IS_MAC1,
+ IS_PORT_2 = IS_XA2_F| IS_R2_F| IS_MAC2,
+};
+
+
+/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */
+enum {
+ IS_ERR_MSK = 0x00003fff,/* All Error bits */
+
+ IS_IRQ_TIST_OV = 1<<13, /* Time Stamp Timer Overflow (YUKON only) */
+ IS_IRQ_SENSOR = 1<<12, /* IRQ from Sensor (YUKON only) */
+ IS_IRQ_MST_ERR = 1<<11, /* IRQ master error detected */
+ IS_IRQ_STAT = 1<<10, /* IRQ status exception */
+ IS_NO_STAT_M1 = 1<<9, /* No Rx Status from MAC 1 */
+ IS_NO_STAT_M2 = 1<<8, /* No Rx Status from MAC 2 */
+ IS_NO_TIST_M1 = 1<<7, /* No Time Stamp from MAC 1 */
+ IS_NO_TIST_M2 = 1<<6, /* No Time Stamp from MAC 2 */
+ IS_RAM_RD_PAR = 1<<5, /* RAM Read Parity Error */
+ IS_RAM_WR_PAR = 1<<4, /* RAM Write Parity Error */
+ IS_M1_PAR_ERR = 1<<3, /* MAC 1 Parity Error */
+ IS_M2_PAR_ERR = 1<<2, /* MAC 2 Parity Error */
+ IS_R1_PAR_ERR = 1<<1, /* Queue R1 Parity Error */
+ IS_R2_PAR_ERR = 1<<0, /* Queue R2 Parity Error */
+};
+
+/* B2_TST_CTRL1 8 bit Test Control Register 1 */
+enum {
+ TST_FRC_DPERR_MR = 1<<7, /* force DATAPERR on MST RD */
+ TST_FRC_DPERR_MW = 1<<6, /* force DATAPERR on MST WR */
+ TST_FRC_DPERR_TR = 1<<5, /* force DATAPERR on TRG RD */
+ TST_FRC_DPERR_TW = 1<<4, /* force DATAPERR on TRG WR */
+ TST_FRC_APERR_M = 1<<3, /* force ADDRPERR on MST */
+ TST_FRC_APERR_T = 1<<2, /* force ADDRPERR on TRG */
+ TST_CFG_WRITE_ON = 1<<1, /* Enable Config Reg WR */
+ TST_CFG_WRITE_OFF= 1<<0, /* Disable Config Reg WR */
+};
+
+/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */
+enum {
+ CFG_CHIP_R_MSK = 0xf<<4, /* Bit 7.. 4: Chip Revision */
+ /* Bit 3.. 2: reserved */
+ CFG_DIS_M2_CLK = 1<<1, /* Disable Clock for 2nd MAC */
+ CFG_SNG_MAC = 1<<0, /* MAC Config: 0=2 MACs / 1=1 MAC*/
+};
+
+/* B2_CHIP_ID 8 bit Chip Identification Number */
+enum {
+ CHIP_ID_GENESIS = 0x0a, /* Chip ID for GENESIS */
+ CHIP_ID_YUKON = 0xb0, /* Chip ID for YUKON */
+ CHIP_ID_YUKON_LITE = 0xb1, /* Chip ID for YUKON-Lite (Rev. A1-A3) */
+ CHIP_ID_YUKON_LP = 0xb2, /* Chip ID for YUKON-LP */
+ CHIP_ID_YUKON_XL = 0xb3, /* Chip ID for YUKON-2 XL */
+ CHIP_ID_YUKON_EC = 0xb6, /* Chip ID for YUKON-2 EC */
+ CHIP_ID_YUKON_FE = 0xb7, /* Chip ID for YUKON-2 FE */
+
+ CHIP_REV_YU_LITE_A1 = 3, /* Chip Rev. for YUKON-Lite A1,A2 */
+ CHIP_REV_YU_LITE_A3 = 7, /* Chip Rev. for YUKON-Lite A3 */
+};
+
+/* B2_LD_TEST 8 bit EPROM loader test register */
+enum {
+ LD_T_ON = 1<<3, /* Loader Test mode on */
+ LD_T_OFF = 1<<2, /* Loader Test mode off */
+ LD_T_STEP = 1<<1, /* Decrement FPROM addr. Counter */
+ LD_START = 1<<0, /* Start loading FPROM */
+};
+
+/* B2_TI_CTRL 8 bit Timer control */
+/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */
+enum {
+ TIM_START = 1<<2, /* Start Timer */
+ TIM_STOP = 1<<1, /* Stop Timer */
+ TIM_CLR_IRQ = 1<<0, /* Clear Timer IRQ (!IRQM) */
+};
+
+/* B2_TI_TEST 8 Bit Timer Test */
+/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */
+/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */
+enum {
+ TIM_T_ON = 1<<2, /* Test mode on */
+ TIM_T_OFF = 1<<1, /* Test mode off */
+ TIM_T_STEP = 1<<0, /* Test step */
+};
+
+/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */
+/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */
+/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */
+enum {
+ DPT_MSK = 0x00ffffffL, /* Bit 23.. 0: Desc Poll Timer Bits */
+
+ DPT_START = 1<<1, /* Start Descriptor Poll Timer */
+ DPT_STOP = 1<<0, /* Stop Descriptor Poll Timer */
+};
+
+/* B2_GP_IO 32 bit General Purpose I/O Register */
+enum {
+ GP_DIR_9 = 1<<25, /* IO_9 direct, 0=In/1=Out */
+ GP_DIR_8 = 1<<24, /* IO_8 direct, 0=In/1=Out */
+ GP_DIR_7 = 1<<23, /* IO_7 direct, 0=In/1=Out */
+ GP_DIR_6 = 1<<22, /* IO_6 direct, 0=In/1=Out */
+ GP_DIR_5 = 1<<21, /* IO_5 direct, 0=In/1=Out */
+ GP_DIR_4 = 1<<20, /* IO_4 direct, 0=In/1=Out */
+ GP_DIR_3 = 1<<19, /* IO_3 direct, 0=In/1=Out */
+ GP_DIR_2 = 1<<18, /* IO_2 direct, 0=In/1=Out */
+ GP_DIR_1 = 1<<17, /* IO_1 direct, 0=In/1=Out */
+ GP_DIR_0 = 1<<16, /* IO_0 direct, 0=In/1=Out */
+
+ GP_IO_9 = 1<<9, /* IO_9 pin */
+ GP_IO_8 = 1<<8, /* IO_8 pin */
+ GP_IO_7 = 1<<7, /* IO_7 pin */
+ GP_IO_6 = 1<<6, /* IO_6 pin */
+ GP_IO_5 = 1<<5, /* IO_5 pin */
+ GP_IO_4 = 1<<4, /* IO_4 pin */
+ GP_IO_3 = 1<<3, /* IO_3 pin */
+ GP_IO_2 = 1<<2, /* IO_2 pin */
+ GP_IO_1 = 1<<1, /* IO_1 pin */
+ GP_IO_0 = 1<<0, /* IO_0 pin */
+};
+
+/* Rx/Tx Path related Arbiter Test Registers */
+/* B3_MA_TO_TEST 16 bit MAC Arbiter Timeout Test Reg */
+/* B3_MA_RC_TEST 16 bit MAC Arbiter Recovery Test Reg */
+/* B3_PA_TEST 16 bit Packet Arbiter Test Register */
+/* Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */
+enum {
+ TX2_T_EV = 1<<15,/* TX2 Timeout/Recv Event occured */
+ TX2_T_ON = 1<<14,/* TX2 Timeout/Recv Timer Test On */
+ TX2_T_OFF = 1<<13,/* TX2 Timeout/Recv Timer Tst Off */
+ TX2_T_STEP = 1<<12,/* TX2 Timeout/Recv Timer Step */
+ TX1_T_EV = 1<<11,/* TX1 Timeout/Recv Event occured */
+ TX1_T_ON = 1<<10,/* TX1 Timeout/Recv Timer Test On */
+ TX1_T_OFF = 1<<9, /* TX1 Timeout/Recv Timer Tst Off */
+ TX1_T_STEP = 1<<8, /* TX1 Timeout/Recv Timer Step */
+ RX2_T_EV = 1<<7, /* RX2 Timeout/Recv Event occured */
+ RX2_T_ON = 1<<6, /* RX2 Timeout/Recv Timer Test On */
+ RX2_T_OFF = 1<<5, /* RX2 Timeout/Recv Timer Tst Off */
+ RX2_T_STEP = 1<<4, /* RX2 Timeout/Recv Timer Step */
+ RX1_T_EV = 1<<3, /* RX1 Timeout/Recv Event occured */
+ RX1_T_ON = 1<<2, /* RX1 Timeout/Recv Timer Test On */
+ RX1_T_OFF = 1<<1, /* RX1 Timeout/Recv Timer Tst Off */
+ RX1_T_STEP = 1<<0, /* RX1 Timeout/Recv Timer Step */
+};
+
+/* Descriptor Bit Definition */
+/* TxCtrl Transmit Buffer Control Field */
+/* RxCtrl Receive Buffer Control Field */
+enum {
+ BMU_OWN = 1<<31, /* OWN bit: 0=host/1=BMU */
+ BMU_STF = 1<<30, /* Start of Frame */
+ BMU_EOF = 1<<29, /* End of Frame */
+ BMU_IRQ_EOB = 1<<28, /* Req "End of Buffer" IRQ */
+ BMU_IRQ_EOF = 1<<27, /* Req "End of Frame" IRQ */
+ /* TxCtrl specific bits */
+ BMU_STFWD = 1<<26, /* (Tx) Store & Forward Frame */
+ BMU_NO_FCS = 1<<25, /* (Tx) Disable MAC FCS (CRC) generation */
+ BMU_SW = 1<<24, /* (Tx) 1 bit res. for SW use */
+ /* RxCtrl specific bits */
+ BMU_DEV_0 = 1<<26, /* (Rx) Transfer data to Dev0 */
+ BMU_STAT_VAL = 1<<25, /* (Rx) Rx Status Valid */
+ BMU_TIST_VAL = 1<<24, /* (Rx) Rx TimeStamp Valid */
+ /* Bit 23..16: BMU Check Opcodes */
+ BMU_CHECK = 0x55<<16, /* Default BMU check */
+ BMU_TCP_CHECK = 0x56<<16, /* Descr with TCP ext */
+ BMU_UDP_CHECK = 0x57<<16, /* Descr with UDP ext (YUKON only) */
+ BMU_BBC = 0xffffL, /* Bit 15.. 0: Buffer Byte Counter */
+};
+
+/* B2_BSC_CTRL 8 bit Blink Source Counter Control */
+enum {
+ BSC_START = 1<<1, /* Start Blink Source Counter */
+ BSC_STOP = 1<<0, /* Stop Blink Source Counter */
+};
+
+/* B2_BSC_STAT 8 bit Blink Source Counter Status */
+enum {
+ BSC_SRC = 1<<0, /* Blink Source, 0=Off / 1=On */
+};
+
+/* B2_BSC_TST 16 bit Blink Source Counter Test Reg */
+enum {
+ BSC_T_ON = 1<<2, /* Test mode on */
+ BSC_T_OFF = 1<<1, /* Test mode off */
+ BSC_T_STEP = 1<<0, /* Test step */
+};
+
+/* B3_RAM_ADDR 32 bit RAM Address, to read or write */
+ /* Bit 31..19: reserved */
+#define RAM_ADR_RAN 0x0007ffffL /* Bit 18.. 0: RAM Address Range */
+/* RAM Interface Registers */
+
+/* B3_RI_CTRL 16 bit RAM Iface Control Register */
+enum {
+ RI_CLR_RD_PERR = 1<<9, /* Clear IRQ RAM Read Parity Err */
+ RI_CLR_WR_PERR = 1<<8, /* Clear IRQ RAM Write Parity Err*/
+
+ RI_RST_CLR = 1<<1, /* Clear RAM Interface Reset */
+ RI_RST_SET = 1<<0, /* Set RAM Interface Reset */
+};
+
+/* B3_RI_TEST 8 bit RAM Iface Test Register */
+enum {
+ RI_T_EV = 1<<3, /* Timeout Event occured */
+ RI_T_ON = 1<<2, /* Timeout Timer Test On */
+ RI_T_OFF = 1<<1, /* Timeout Timer Test Off */
+ RI_T_STEP = 1<<0, /* Timeout Timer Step */
+};
+
+/* MAC Arbiter Registers */
+/* B3_MA_TO_CTRL 16 bit MAC Arbiter Timeout Ctrl Reg */
+enum {
+ MA_FOE_ON = 1<<3, /* XMAC Fast Output Enable ON */
+ MA_FOE_OFF = 1<<2, /* XMAC Fast Output Enable OFF */
+ MA_RST_CLR = 1<<1, /* Clear MAC Arbiter Reset */
+ MA_RST_SET = 1<<0, /* Set MAC Arbiter Reset */
+
+};
+
+/* Timeout values */
+#define SK_MAC_TO_53 72 /* MAC arbiter timeout */
+#define SK_PKT_TO_53 0x2000 /* Packet arbiter timeout */
+#define SK_PKT_TO_MAX 0xffff /* Maximum value */
+#define SK_RI_TO_53 36 /* RAM interface timeout */
+
+
+/* B3_MA_RC_CTRL 16 bit MAC Arbiter Recovery Ctrl Reg */
+enum {
+ MA_ENA_REC_TX2 = 1<<7, /* Enable Recovery Timer TX2 */
+ MA_DIS_REC_TX2 = 1<<6, /* Disable Recovery Timer TX2 */
+ MA_ENA_REC_TX1 = 1<<5, /* Enable Recovery Timer TX1 */
+ MA_DIS_REC_TX1 = 1<<4, /* Disable Recovery Timer TX1 */
+ MA_ENA_REC_RX2 = 1<<3, /* Enable Recovery Timer RX2 */
+ MA_DIS_REC_RX2 = 1<<2, /* Disable Recovery Timer RX2 */
+ MA_ENA_REC_RX1 = 1<<1, /* Enable Recovery Timer RX1 */
+ MA_DIS_REC_RX1 = 1<<0, /* Disable Recovery Timer RX1 */
+};
+
+/* Packet Arbiter Registers */
+/* B3_PA_CTRL 16 bit Packet Arbiter Ctrl Register */
+enum {
+ PA_CLR_TO_TX2 = 1<<13, /* Clear IRQ Packet Timeout TX2 */
+ PA_CLR_TO_TX1 = 1<<12, /* Clear IRQ Packet Timeout TX1 */
+ PA_CLR_TO_RX2 = 1<<11, /* Clear IRQ Packet Timeout RX2 */
+ PA_CLR_TO_RX1 = 1<<10, /* Clear IRQ Packet Timeout RX1 */
+ PA_ENA_TO_TX2 = 1<<9, /* Enable Timeout Timer TX2 */
+ PA_DIS_TO_TX2 = 1<<8, /* Disable Timeout Timer TX2 */
+ PA_ENA_TO_TX1 = 1<<7, /* Enable Timeout Timer TX1 */
+ PA_DIS_TO_TX1 = 1<<6, /* Disable Timeout Timer TX1 */
+ PA_ENA_TO_RX2 = 1<<5, /* Enable Timeout Timer RX2 */
+ PA_DIS_TO_RX2 = 1<<4, /* Disable Timeout Timer RX2 */
+ PA_ENA_TO_RX1 = 1<<3, /* Enable Timeout Timer RX1 */
+ PA_DIS_TO_RX1 = 1<<2, /* Disable Timeout Timer RX1 */
+ PA_RST_CLR = 1<<1, /* Clear MAC Arbiter Reset */
+ PA_RST_SET = 1<<0, /* Set MAC Arbiter Reset */
+};
+
+#define PA_ENA_TO_ALL (PA_ENA_TO_RX1 | PA_ENA_TO_RX2 |\
+ PA_ENA_TO_TX1 | PA_ENA_TO_TX2)
+
+
+/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
+/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */
+/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */
+/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */
+/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */
+
+#define TXA_MAX_VAL 0x00ffffffUL /* Bit 23.. 0: Max TXA Timer/Cnt Val */
+
+/* TXA_CTRL 8 bit Tx Arbiter Control Register */
+enum {
+ TXA_ENA_FSYNC = 1<<7, /* Enable force of sync Tx queue */
+ TXA_DIS_FSYNC = 1<<6, /* Disable force of sync Tx queue */
+ TXA_ENA_ALLOC = 1<<5, /* Enable alloc of free bandwidth */
+ TXA_DIS_ALLOC = 1<<4, /* Disable alloc of free bandwidth */
+ TXA_START_RC = 1<<3, /* Start sync Rate Control */
+ TXA_STOP_RC = 1<<2, /* Stop sync Rate Control */
+ TXA_ENA_ARB = 1<<1, /* Enable Tx Arbiter */
+ TXA_DIS_ARB = 1<<0, /* Disable Tx Arbiter */
+};
+
+/*
+ * Bank 4 - 5
+ */
+/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
+enum {
+ TXA_ITI_INI = 0x0200,/* 32 bit Tx Arb Interval Timer Init Val*/
+ TXA_ITI_VAL = 0x0204,/* 32 bit Tx Arb Interval Timer Value */
+ TXA_LIM_INI = 0x0208,/* 32 bit Tx Arb Limit Counter Init Val */
+ TXA_LIM_VAL = 0x020c,/* 32 bit Tx Arb Limit Counter Value */
+ TXA_CTRL = 0x0210,/* 8 bit Tx Arbiter Control Register */
+ TXA_TEST = 0x0211,/* 8 bit Tx Arbiter Test Register */
+ TXA_STAT = 0x0212,/* 8 bit Tx Arbiter Status Register */
+};
+
+
+enum {
+ B6_EXT_REG = 0x0300,/* External registers (GENESIS only) */
+ B7_CFG_SPC = 0x0380,/* copy of the Configuration register */
+ B8_RQ1_REGS = 0x0400,/* Receive Queue 1 */
+ B8_RQ2_REGS = 0x0480,/* Receive Queue 2 */
+ B8_TS1_REGS = 0x0600,/* Transmit sync queue 1 */
+ B8_TA1_REGS = 0x0680,/* Transmit async queue 1 */
+ B8_TS2_REGS = 0x0700,/* Transmit sync queue 2 */
+ B8_TA2_REGS = 0x0780,/* Transmit sync queue 2 */
+ B16_RAM_REGS = 0x0800,/* RAM Buffer Registers */
+};
+
+/* Queue Register Offsets, use Q_ADDR() to access */
+enum {
+ B8_Q_REGS = 0x0400, /* base of Queue registers */
+ Q_D = 0x00, /* 8*32 bit Current Descriptor */
+ Q_DA_L = 0x20, /* 32 bit Current Descriptor Address Low dWord */
+ Q_DA_H = 0x24, /* 32 bit Current Descriptor Address High dWord */
+ Q_AC_L = 0x28, /* 32 bit Current Address Counter Low dWord */
+ Q_AC_H = 0x2c, /* 32 bit Current Address Counter High dWord */
+ Q_BC = 0x30, /* 32 bit Current Byte Counter */
+ Q_CSR = 0x34, /* 32 bit BMU Control/Status Register */
+ Q_F = 0x38, /* 32 bit Flag Register */
+ Q_T1 = 0x3c, /* 32 bit Test Register 1 */
+ Q_T1_TR = 0x3c, /* 8 bit Test Register 1 Transfer SM */
+ Q_T1_WR = 0x3d, /* 8 bit Test Register 1 Write Descriptor SM */
+ Q_T1_RD = 0x3e, /* 8 bit Test Register 1 Read Descriptor SM */
+ Q_T1_SV = 0x3f, /* 8 bit Test Register 1 Supervisor SM */
+ Q_T2 = 0x40, /* 32 bit Test Register 2 */
+ Q_T3 = 0x44, /* 32 bit Test Register 3 */
+
+/* Yukon-2 */
+ Q_DONE = 0x24, /* 16 bit Done Index (Yukon-2 only) */
+ Q_WM = 0x40, /* 16 bit FIFO Watermark */
+ Q_AL = 0x42, /* 8 bit FIFO Alignment */
+ Q_RSP = 0x44, /* 16 bit FIFO Read Shadow Pointer */
+ Q_RSL = 0x46, /* 8 bit FIFO Read Shadow Level */
+ Q_RP = 0x48, /* 8 bit FIFO Read Pointer */
+ Q_RL = 0x4a, /* 8 bit FIFO Read Level */
+ Q_WP = 0x4c, /* 8 bit FIFO Write Pointer */
+ Q_WSP = 0x4d, /* 8 bit FIFO Write Shadow Pointer */
+ Q_WL = 0x4e, /* 8 bit FIFO Write Level */
+ Q_WSL = 0x4f, /* 8 bit FIFO Write Shadow Level */
+};
+#define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs))
+
+/* RAM Buffer Register Offsets */
+enum {
+
+ RB_START = 0x00,/* 32 bit RAM Buffer Start Address */
+ RB_END = 0x04,/* 32 bit RAM Buffer End Address */
+ RB_WP = 0x08,/* 32 bit RAM Buffer Write Pointer */
+ RB_RP = 0x0c,/* 32 bit RAM Buffer Read Pointer */
+ RB_RX_UTPP = 0x10,/* 32 bit Rx Upper Threshold, Pause Packet */
+ RB_RX_LTPP = 0x14,/* 32 bit Rx Lower Threshold, Pause Packet */
+ RB_RX_UTHP = 0x18,/* 32 bit Rx Upper Threshold, High Prio */
+ RB_RX_LTHP = 0x1c,/* 32 bit Rx Lower Threshold, High Prio */
+ /* 0x10 - 0x1f: reserved at Tx RAM Buffer Registers */
+ RB_PC = 0x20,/* 32 bit RAM Buffer Packet Counter */
+ RB_LEV = 0x24,/* 32 bit RAM Buffer Level Register */
+ RB_CTRL = 0x28,/* 32 bit RAM Buffer Control Register */
+ RB_TST1 = 0x29,/* 8 bit RAM Buffer Test Register 1 */
+ RB_TST2 = 0x2a,/* 8 bit RAM Buffer Test Register 2 */
+};
+
+/* Receive and Transmit Queues */
+enum {
+ Q_R1 = 0x0000, /* Receive Queue 1 */
+ Q_R2 = 0x0080, /* Receive Queue 2 */
+ Q_XS1 = 0x0200, /* Synchronous Transmit Queue 1 */
+ Q_XA1 = 0x0280, /* Asynchronous Transmit Queue 1 */
+ Q_XS2 = 0x0300, /* Synchronous Transmit Queue 2 */
+ Q_XA2 = 0x0380, /* Asynchronous Transmit Queue 2 */
+};
+
+/* Different MAC Types */
+enum {
+ SK_MAC_XMAC = 0, /* Xaqti XMAC II */
+ SK_MAC_GMAC = 1, /* Marvell GMAC */
+};
+
+/* Different PHY Types */
+enum {
+ SK_PHY_XMAC = 0,/* integrated in XMAC II */
+ SK_PHY_BCOM = 1,/* Broadcom BCM5400 */
+ SK_PHY_LONE = 2,/* Level One LXT1000 [not supported]*/
+ SK_PHY_NAT = 3,/* National DP83891 [not supported] */
+ SK_PHY_MARV_COPPER= 4,/* Marvell 88E1011S */
+ SK_PHY_MARV_FIBER = 5,/* Marvell 88E1011S working on fiber */
+};
+
+/* PHY addresses (bits 12..8 of PHY address reg) */
+enum {
+ PHY_ADDR_XMAC = 0<<8,
+ PHY_ADDR_BCOM = 1<<8,
+ PHY_ADDR_LONE = 3<<8,
+ PHY_ADDR_NAT = 0<<8,
+/* GPHY address (bits 15..11 of SMI control reg) */
+ PHY_ADDR_MARV = 0,
+};
+
+#define RB_ADDR(offs, queue) (B16_RAM_REGS + (queue) + (offs))
+
+/* Receive MAC FIFO, Receive LED, and Link_Sync regs (GENESIS only) */
+enum {
+ RX_MFF_EA = 0x0c00,/* 32 bit Receive MAC FIFO End Address */
+ RX_MFF_WP = 0x0c04,/* 32 bit Receive MAC FIFO Write Pointer */
+
+ RX_MFF_RP = 0x0c0c,/* 32 bit Receive MAC FIFO Read Pointer */
+ RX_MFF_PC = 0x0c10,/* 32 bit Receive MAC FIFO Packet Cnt */
+ RX_MFF_LEV = 0x0c14,/* 32 bit Receive MAC FIFO Level */
+ RX_MFF_CTRL1 = 0x0c18,/* 16 bit Receive MAC FIFO Control Reg 1*/
+ RX_MFF_STAT_TO = 0x0c1a,/* 8 bit Receive MAC Status Timeout */
+ RX_MFF_TIST_TO = 0x0c1b,/* 8 bit Receive MAC Time Stamp Timeout */
+ RX_MFF_CTRL2 = 0x0c1c,/* 8 bit Receive MAC FIFO Control Reg 2*/
+ RX_MFF_TST1 = 0x0c1d,/* 8 bit Receive MAC FIFO Test Reg 1 */
+ RX_MFF_TST2 = 0x0c1e,/* 8 bit Receive MAC FIFO Test Reg 2 */
+
+ RX_LED_INI = 0x0c20,/* 32 bit Receive LED Cnt Init Value */
+ RX_LED_VAL = 0x0c24,/* 32 bit Receive LED Cnt Current Value */
+ RX_LED_CTRL = 0x0c28,/* 8 bit Receive LED Cnt Control Reg */
+ RX_LED_TST = 0x0c29,/* 8 bit Receive LED Cnt Test Register */
+
+ LNK_SYNC_INI = 0x0c30,/* 32 bit Link Sync Cnt Init Value */
+ LNK_SYNC_VAL = 0x0c34,/* 32 bit Link Sync Cnt Current Value */
+ LNK_SYNC_CTRL = 0x0c38,/* 8 bit Link Sync Cnt Control Register */
+ LNK_SYNC_TST = 0x0c39,/* 8 bit Link Sync Cnt Test Register */
+ LNK_LED_REG = 0x0c3c,/* 8 bit Link LED Register */
+};
+
+/* Receive and Transmit MAC FIFO Registers (GENESIS only) */
+/* RX_MFF_CTRL1 16 bit Receive MAC FIFO Control Reg 1 */
+enum {
+ MFF_ENA_RDY_PAT = 1<<13, /* Enable Ready Patch */
+ MFF_DIS_RDY_PAT = 1<<12, /* Disable Ready Patch */
+ MFF_ENA_TIM_PAT = 1<<11, /* Enable Timing Patch */
+ MFF_DIS_TIM_PAT = 1<<10, /* Disable Timing Patch */
+ MFF_ENA_ALM_FUL = 1<<9, /* Enable AlmostFull Sign */
+ MFF_DIS_ALM_FUL = 1<<8, /* Disable AlmostFull Sign */
+ MFF_ENA_PAUSE = 1<<7, /* Enable Pause Signaling */
+ MFF_DIS_PAUSE = 1<<6, /* Disable Pause Signaling */
+ MFF_ENA_FLUSH = 1<<5, /* Enable Frame Flushing */
+ MFF_DIS_FLUSH = 1<<4, /* Disable Frame Flushing */
+ MFF_ENA_TIST = 1<<3, /* Enable Time Stamp Gener */
+ MFF_DIS_TIST = 1<<2, /* Disable Time Stamp Gener */
+ MFF_CLR_INTIST = 1<<1, /* Clear IRQ No Time Stamp */
+ MFF_CLR_INSTAT = 1<<0, /* Clear IRQ No Status */
+#define MFF_RX_CTRL_DEF MFF_ENA_TIM_PAT
+};
+
+/* TX_MFF_CTRL1 16 bit Transmit MAC FIFO Control Reg 1 */
+enum {
+ MFF_CLR_PERR = 1<<15, /* Clear Parity Error IRQ */
+ /* Bit 14: reserved */
+ MFF_ENA_PKT_REC = 1<<13, /* Enable Packet Recovery */
+ MFF_DIS_PKT_REC = 1<<12, /* Disable Packet Recovery */
+
+ MFF_ENA_W4E = 1<<7, /* Enable Wait for Empty */
+ MFF_DIS_W4E = 1<<6, /* Disable Wait for Empty */
+
+ MFF_ENA_LOOPB = 1<<3, /* Enable Loopback */
+ MFF_DIS_LOOPB = 1<<2, /* Disable Loopback */
+ MFF_CLR_MAC_RST = 1<<1, /* Clear XMAC Reset */
+ MFF_SET_MAC_RST = 1<<0, /* Set XMAC Reset */
+};
+
+#define MFF_TX_CTRL_DEF (MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH)
+
+/* RX_MFF_TST2 8 bit Receive MAC FIFO Test Register 2 */
+/* TX_MFF_TST2 8 bit Transmit MAC FIFO Test Register 2 */
+enum {
+ MFF_WSP_T_ON = 1<<6, /* Tx: Write Shadow Ptr TestOn */
+ MFF_WSP_T_OFF = 1<<5, /* Tx: Write Shadow Ptr TstOff */
+ MFF_WSP_INC = 1<<4, /* Tx: Write Shadow Ptr Increment */
+ MFF_PC_DEC = 1<<3, /* Packet Counter Decrement */
+ MFF_PC_T_ON = 1<<2, /* Packet Counter Test On */
+ MFF_PC_T_OFF = 1<<1, /* Packet Counter Test Off */
+ MFF_PC_INC = 1<<0, /* Packet Counter Increment */
+};
+
+/* RX_MFF_TST1 8 bit Receive MAC FIFO Test Register 1 */
+/* TX_MFF_TST1 8 bit Transmit MAC FIFO Test Register 1 */
+enum {
+ MFF_WP_T_ON = 1<<6, /* Write Pointer Test On */
+ MFF_WP_T_OFF = 1<<5, /* Write Pointer Test Off */
+ MFF_WP_INC = 1<<4, /* Write Pointer Increm */
+
+ MFF_RP_T_ON = 1<<2, /* Read Pointer Test On */
+ MFF_RP_T_OFF = 1<<1, /* Read Pointer Test Off */
+ MFF_RP_DEC = 1<<0, /* Read Pointer Decrement */
+};
+
+/* RX_MFF_CTRL2 8 bit Receive MAC FIFO Control Reg 2 */
+/* TX_MFF_CTRL2 8 bit Transmit MAC FIFO Control Reg 2 */
+enum {
+ MFF_ENA_OP_MD = 1<<3, /* Enable Operation Mode */
+ MFF_DIS_OP_MD = 1<<2, /* Disable Operation Mode */
+ MFF_RST_CLR = 1<<1, /* Clear MAC FIFO Reset */
+ MFF_RST_SET = 1<<0, /* Set MAC FIFO Reset */
+};
+
+
+/* Link LED Counter Registers (GENESIS only) */
+
+/* RX_LED_CTRL 8 bit Receive LED Cnt Control Reg */
+/* TX_LED_CTRL 8 bit Transmit LED Cnt Control Reg */
+/* LNK_SYNC_CTRL 8 bit Link Sync Cnt Control Register */
+enum {
+ LED_START = 1<<2, /* Start Timer */
+ LED_STOP = 1<<1, /* Stop Timer */
+ LED_STATE = 1<<0, /* Rx/Tx: LED State, 1=LED on */
+};
+
+/* RX_LED_TST 8 bit Receive LED Cnt Test Register */
+/* TX_LED_TST 8 bit Transmit LED Cnt Test Register */
+/* LNK_SYNC_TST 8 bit Link Sync Cnt Test Register */
+enum {
+ LED_T_ON = 1<<2, /* LED Counter Test mode On */
+ LED_T_OFF = 1<<1, /* LED Counter Test mode Off */
+ LED_T_STEP = 1<<0, /* LED Counter Step */
+};
+
+/* LNK_LED_REG 8 bit Link LED Register */
+enum {
+ LED_BLK_ON = 1<<5, /* Link LED Blinking On */
+ LED_BLK_OFF = 1<<4, /* Link LED Blinking Off */
+ LED_SYNC_ON = 1<<3, /* Use Sync Wire to switch LED */
+ LED_SYNC_OFF = 1<<2, /* Disable Sync Wire Input */
+ LED_ON = 1<<1, /* switch LED on */
+ LED_OFF = 1<<0, /* switch LED off */
+};
+
+/* Receive GMAC FIFO (YUKON and Yukon-2) */
+enum {
+ RX_GMF_EA = 0x0c40,/* 32 bit Rx GMAC FIFO End Address */
+ RX_GMF_AF_THR = 0x0c44,/* 32 bit Rx GMAC FIFO Almost Full Thresh. */
+ RX_GMF_CTRL_T = 0x0c48,/* 32 bit Rx GMAC FIFO Control/Test */
+ RX_GMF_FL_MSK = 0x0c4c,/* 32 bit Rx GMAC FIFO Flush Mask */
+ RX_GMF_FL_THR = 0x0c50,/* 32 bit Rx GMAC FIFO Flush Threshold */
+ RX_GMF_TR_THR = 0x0c54,/* 32 bit Rx Truncation Threshold (Yukon-2) */
+
+ RX_GMF_VLAN = 0x0c5c,/* 32 bit Rx VLAN Type Register (Yukon-2) */
+ RX_GMF_WP = 0x0c60,/* 32 bit Rx GMAC FIFO Write Pointer */
+
+ RX_GMF_WLEV = 0x0c68,/* 32 bit Rx GMAC FIFO Write Level */
+
+ RX_GMF_RP = 0x0c70,/* 32 bit Rx GMAC FIFO Read Pointer */
+
+ RX_GMF_RLEV = 0x0c78,/* 32 bit Rx GMAC FIFO Read Level */
+};
+
+
+/* TXA_TEST 8 bit Tx Arbiter Test Register */
+enum {
+ TXA_INT_T_ON = 1<<5, /* Tx Arb Interval Timer Test On */
+ TXA_INT_T_OFF = 1<<4, /* Tx Arb Interval Timer Test Off */
+ TXA_INT_T_STEP = 1<<3, /* Tx Arb Interval Timer Step */
+ TXA_LIM_T_ON = 1<<2, /* Tx Arb Limit Timer Test On */
+ TXA_LIM_T_OFF = 1<<1, /* Tx Arb Limit Timer Test Off */
+ TXA_LIM_T_STEP = 1<<0, /* Tx Arb Limit Timer Step */
+};
+
+/* TXA_STAT 8 bit Tx Arbiter Status Register */
+enum {
+ TXA_PRIO_XS = 1<<0, /* sync queue has prio to send */
+};
+
+
+/* Q_BC 32 bit Current Byte Counter */
+
+/* BMU Control Status Registers */
+/* B0_R1_CSR 32 bit BMU Ctrl/Stat Rx Queue 1 */
+/* B0_R2_CSR 32 bit BMU Ctrl/Stat Rx Queue 2 */
+/* B0_XA1_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */
+/* B0_XS1_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 1 */
+/* B0_XA2_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */
+/* B0_XS2_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 2 */
+/* Q_CSR 32 bit BMU Control/Status Register */
+
+enum {
+ CSR_SV_IDLE = 1<<24, /* BMU SM Idle */
+
+ CSR_DESC_CLR = 1<<21, /* Clear Reset for Descr */
+ CSR_DESC_SET = 1<<20, /* Set Reset for Descr */
+ CSR_FIFO_CLR = 1<<19, /* Clear Reset for FIFO */
+ CSR_FIFO_SET = 1<<18, /* Set Reset for FIFO */
+ CSR_HPI_RUN = 1<<17, /* Release HPI SM */
+ CSR_HPI_RST = 1<<16, /* Reset HPI SM to Idle */
+ CSR_SV_RUN = 1<<15, /* Release Supervisor SM */
+ CSR_SV_RST = 1<<14, /* Reset Supervisor SM */
+ CSR_DREAD_RUN = 1<<13, /* Release Descr Read SM */
+ CSR_DREAD_RST = 1<<12, /* Reset Descr Read SM */
+ CSR_DWRITE_RUN = 1<<11, /* Release Descr Write SM */
+ CSR_DWRITE_RST = 1<<10, /* Reset Descr Write SM */
+ CSR_TRANS_RUN = 1<<9, /* Release Transfer SM */
+ CSR_TRANS_RST = 1<<8, /* Reset Transfer SM */
+ CSR_ENA_POL = 1<<7, /* Enable Descr Polling */
+ CSR_DIS_POL = 1<<6, /* Disable Descr Polling */
+ CSR_STOP = 1<<5, /* Stop Rx/Tx Queue */
+ CSR_START = 1<<4, /* Start Rx/Tx Queue */
+ CSR_IRQ_CL_P = 1<<3, /* (Rx) Clear Parity IRQ */
+ CSR_IRQ_CL_B = 1<<2, /* Clear EOB IRQ */
+ CSR_IRQ_CL_F = 1<<1, /* Clear EOF IRQ */
+ CSR_IRQ_CL_C = 1<<0, /* Clear ERR IRQ */
+};
+
+#define CSR_SET_RESET (CSR_DESC_SET | CSR_FIFO_SET | CSR_HPI_RST |\
+ CSR_SV_RST | CSR_DREAD_RST | CSR_DWRITE_RST |\
+ CSR_TRANS_RST)
+#define CSR_CLR_RESET (CSR_DESC_CLR | CSR_FIFO_CLR | CSR_HPI_RUN |\
+ CSR_SV_RUN | CSR_DREAD_RUN | CSR_DWRITE_RUN |\
+ CSR_TRANS_RUN)
+
+/* Q_F 32 bit Flag Register */
+enum {
+ F_ALM_FULL = 1<<27, /* Rx FIFO: almost full */
+ F_EMPTY = 1<<27, /* Tx FIFO: empty flag */
+ F_FIFO_EOF = 1<<26, /* Tag (EOF Flag) bit in FIFO */
+ F_WM_REACHED = 1<<25, /* Watermark reached */
+
+ F_FIFO_LEVEL = 0x1fL<<16, /* Bit 23..16: # of Qwords in FIFO */
+ F_WATER_MARK = 0x0007ffL, /* Bit 10.. 0: Watermark */
+};
+
+/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */
+/* RB_START 32 bit RAM Buffer Start Address */
+/* RB_END 32 bit RAM Buffer End Address */
+/* RB_WP 32 bit RAM Buffer Write Pointer */
+/* RB_RP 32 bit RAM Buffer Read Pointer */
+/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */
+/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */
+/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */
+/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */
+/* RB_PC 32 bit RAM Buffer Packet Counter */
+/* RB_LEV 32 bit RAM Buffer Level Register */
+
+#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */
+/* RB_TST2 8 bit RAM Buffer Test Register 2 */
+/* RB_TST1 8 bit RAM Buffer Test Register 1 */
+
+/* RB_CTRL 8 bit RAM Buffer Control Register */
+enum {
+ RB_ENA_STFWD = 1<<5, /* Enable Store & Forward */
+ RB_DIS_STFWD = 1<<4, /* Disable Store & Forward */
+ RB_ENA_OP_MD = 1<<3, /* Enable Operation Mode */
+ RB_DIS_OP_MD = 1<<2, /* Disable Operation Mode */
+ RB_RST_CLR = 1<<1, /* Clear RAM Buf STM Reset */
+ RB_RST_SET = 1<<0, /* Set RAM Buf STM Reset */
+};
+
+/* Transmit MAC FIFO and Transmit LED Registers (GENESIS only), */
+enum {
+ TX_MFF_EA = 0x0d00,/* 32 bit Transmit MAC FIFO End Address */
+ TX_MFF_WP = 0x0d04,/* 32 bit Transmit MAC FIFO WR Pointer */
+ TX_MFF_WSP = 0x0d08,/* 32 bit Transmit MAC FIFO WR Shadow Ptr */
+ TX_MFF_RP = 0x0d0c,/* 32 bit Transmit MAC FIFO RD Pointer */
+ TX_MFF_PC = 0x0d10,/* 32 bit Transmit MAC FIFO Packet Cnt */
+ TX_MFF_LEV = 0x0d14,/* 32 bit Transmit MAC FIFO Level */
+ TX_MFF_CTRL1 = 0x0d18,/* 16 bit Transmit MAC FIFO Ctrl Reg 1 */
+ TX_MFF_WAF = 0x0d1a,/* 8 bit Transmit MAC Wait after flush */
+
+ TX_MFF_CTRL2 = 0x0d1c,/* 8 bit Transmit MAC FIFO Ctrl Reg 2 */
+ TX_MFF_TST1 = 0x0d1d,/* 8 bit Transmit MAC FIFO Test Reg 1 */
+ TX_MFF_TST2 = 0x0d1e,/* 8 bit Transmit MAC FIFO Test Reg 2 */
+
+ TX_LED_INI = 0x0d20,/* 32 bit Transmit LED Cnt Init Value */
+ TX_LED_VAL = 0x0d24,/* 32 bit Transmit LED Cnt Current Val */
+ TX_LED_CTRL = 0x0d28,/* 8 bit Transmit LED Cnt Control Reg */
+ TX_LED_TST = 0x0d29,/* 8 bit Transmit LED Cnt Test Reg */
+};
+
+/* Counter and Timer constants, for a host clock of 62.5 MHz */
+#define SK_XMIT_DUR 0x002faf08UL /* 50 ms */
+#define SK_BLK_DUR 0x01dcd650UL /* 500 ms */
+
+#define SK_DPOLL_DEF 0x00ee6b28UL /* 250 ms at 62.5 MHz */
+
+#define SK_DPOLL_MAX 0x00ffffffUL /* 268 ms at 62.5 MHz */
+ /* 215 ms at 78.12 MHz */
+
+#define SK_FACT_62 100 /* is given in percent */
+#define SK_FACT_53 85 /* on GENESIS: 53.12 MHz */
+#define SK_FACT_78 125 /* on YUKON: 78.12 MHz */
+
+
+/* Transmit GMAC FIFO (YUKON only) */
+enum {
+ TX_GMF_EA = 0x0d40,/* 32 bit Tx GMAC FIFO End Address */
+ TX_GMF_AE_THR = 0x0d44,/* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/
+ TX_GMF_CTRL_T = 0x0d48,/* 32 bit Tx GMAC FIFO Control/Test */
+
+ TX_GMF_WP = 0x0d60,/* 32 bit Tx GMAC FIFO Write Pointer */
+ TX_GMF_WSP = 0x0d64,/* 32 bit Tx GMAC FIFO Write Shadow Ptr. */
+ TX_GMF_WLEV = 0x0d68,/* 32 bit Tx GMAC FIFO Write Level */
+
+ TX_GMF_RP = 0x0d70,/* 32 bit Tx GMAC FIFO Read Pointer */
+ TX_GMF_RSTP = 0x0d74,/* 32 bit Tx GMAC FIFO Restart Pointer */
+ TX_GMF_RLEV = 0x0d78,/* 32 bit Tx GMAC FIFO Read Level */
+
+ /* Descriptor Poll Timer Registers */
+ B28_DPT_INI = 0x0e00,/* 24 bit Descriptor Poll Timer Init Val */
+ B28_DPT_VAL = 0x0e04,/* 24 bit Descriptor Poll Timer Curr Val */
+ B28_DPT_CTRL = 0x0e08,/* 8 bit Descriptor Poll Timer Ctrl Reg */
+
+ B28_DPT_TST = 0x0e0a,/* 8 bit Descriptor Poll Timer Test Reg */
+
+ /* Time Stamp Timer Registers (YUKON only) */
+ GMAC_TI_ST_VAL = 0x0e14,/* 32 bit Time Stamp Timer Curr Val */
+ GMAC_TI_ST_CTRL = 0x0e18,/* 8 bit Time Stamp Timer Ctrl Reg */
+ GMAC_TI_ST_TST = 0x0e1a,/* 8 bit Time Stamp Timer Test Reg */
+};
+
+/* Status BMU Registers (Yukon-2 only)*/
+enum {
+ STAT_CTRL = 0x0e80,/* 32 bit Status BMU Control Reg */
+ STAT_LAST_IDX = 0x0e84,/* 16 bit Status BMU Last Index */
+ /* 0x0e85 - 0x0e86: reserved */
+ STAT_LIST_ADDR_LO = 0x0e88,/* 32 bit Status List Start Addr (low) */
+ STAT_LIST_ADDR_HI = 0x0e8c,/* 32 bit Status List Start Addr (high) */
+ STAT_TXA1_RIDX = 0x0e90,/* 16 bit Status TxA1 Report Index Reg */
+ STAT_TXS1_RIDX = 0x0e92,/* 16 bit Status TxS1 Report Index Reg */
+ STAT_TXA2_RIDX = 0x0e94,/* 16 bit Status TxA2 Report Index Reg */
+ STAT_TXS2_RIDX = 0x0e96,/* 16 bit Status TxS2 Report Index Reg */
+ STAT_TX_IDX_TH = 0x0e98,/* 16 bit Status Tx Index Threshold Reg */
+ STAT_PUT_IDX = 0x0e9c,/* 16 bit Status Put Index Reg */
+
+/* FIFO Control/Status Registers (Yukon-2 only)*/
+ STAT_FIFO_WP = 0x0ea0,/* 8 bit Status FIFO Write Pointer Reg */
+ STAT_FIFO_RP = 0x0ea4,/* 8 bit Status FIFO Read Pointer Reg */
+ STAT_FIFO_RSP = 0x0ea6,/* 8 bit Status FIFO Read Shadow Ptr */
+ STAT_FIFO_LEVEL = 0x0ea8,/* 8 bit Status FIFO Level Reg */
+ STAT_FIFO_SHLVL = 0x0eaa,/* 8 bit Status FIFO Shadow Level Reg */
+ STAT_FIFO_WM = 0x0eac,/* 8 bit Status FIFO Watermark Reg */
+ STAT_FIFO_ISR_WM = 0x0ead,/* 8 bit Status FIFO ISR Watermark Reg */
+
+/* Level and ISR Timer Registers (Yukon-2 only)*/
+ STAT_LEV_TIMER_INI = 0x0eb0,/* 32 bit Level Timer Init. Value Reg */
+ STAT_LEV_TIMER_CNT = 0x0eb4,/* 32 bit Level Timer Counter Reg */
+ STAT_LEV_TIMER_CTRL = 0x0eb8,/* 8 bit Level Timer Control Reg */
+ STAT_LEV_TIMER_TEST = 0x0eb9,/* 8 bit Level Timer Test Reg */
+ STAT_TX_TIMER_INI = 0x0ec0,/* 32 bit Tx Timer Init. Value Reg */
+ STAT_TX_TIMER_CNT = 0x0ec4,/* 32 bit Tx Timer Counter Reg */
+ STAT_TX_TIMER_CTRL = 0x0ec8,/* 8 bit Tx Timer Control Reg */
+ STAT_TX_TIMER_TEST = 0x0ec9,/* 8 bit Tx Timer Test Reg */
+ STAT_ISR_TIMER_INI = 0x0ed0,/* 32 bit ISR Timer Init. Value Reg */
+ STAT_ISR_TIMER_CNT = 0x0ed4,/* 32 bit ISR Timer Counter Reg */
+ STAT_ISR_TIMER_CTRL = 0x0ed8,/* 8 bit ISR Timer Control Reg */
+ STAT_ISR_TIMER_TEST = 0x0ed9,/* 8 bit ISR Timer Test Reg */
+
+ ST_LAST_IDX_MASK = 0x007f,/* Last Index Mask */
+ ST_TXRP_IDX_MASK = 0x0fff,/* Tx Report Index Mask */
+ ST_TXTH_IDX_MASK = 0x0fff,/* Tx Threshold Index Mask */
+ ST_WM_IDX_MASK = 0x3f,/* FIFO Watermark Index Mask */
+};
+
+enum {
+ LINKLED_OFF = 0x01,
+ LINKLED_ON = 0x02,
+ LINKLED_LINKSYNC_OFF = 0x04,
+ LINKLED_LINKSYNC_ON = 0x08,
+ LINKLED_BLINK_OFF = 0x10,
+ LINKLED_BLINK_ON = 0x20,
+};
+
+/* GMAC and GPHY Control Registers (YUKON only) */
+enum {
+ GMAC_CTRL = 0x0f00,/* 32 bit GMAC Control Reg */
+ GPHY_CTRL = 0x0f04,/* 32 bit GPHY Control Reg */
+ GMAC_IRQ_SRC = 0x0f08,/* 8 bit GMAC Interrupt Source Reg */
+ GMAC_IRQ_MSK = 0x0f0c,/* 8 bit GMAC Interrupt Mask Reg */
+ GMAC_LINK_CTRL = 0x0f10,/* 16 bit Link Control Reg */
+
+/* Wake-up Frame Pattern Match Control Registers (YUKON only) */
+
+ WOL_REG_OFFS = 0x20,/* HW-Bug: Address is + 0x20 against spec. */
+
+ WOL_CTRL_STAT = 0x0f20,/* 16 bit WOL Control/Status Reg */
+ WOL_MATCH_CTL = 0x0f22,/* 8 bit WOL Match Control Reg */
+ WOL_MATCH_RES = 0x0f23,/* 8 bit WOL Match Result Reg */
+ WOL_MAC_ADDR = 0x0f24,/* 32 bit WOL MAC Address */
+ WOL_PATT_PME = 0x0f2a,/* 8 bit WOL PME Match Enable (Yukon-2) */
+ WOL_PATT_ASFM = 0x0f2b,/* 8 bit WOL ASF Match Enable (Yukon-2) */
+ WOL_PATT_RPTR = 0x0f2c,/* 8 bit WOL Pattern Read Pointer */
+
+/* WOL Pattern Length Registers (YUKON only) */
+
+ WOL_PATT_LEN_LO = 0x0f30,/* 32 bit WOL Pattern Length 3..0 */
+ WOL_PATT_LEN_HI = 0x0f34,/* 24 bit WOL Pattern Length 6..4 */
+
+/* WOL Pattern Counter Registers (YUKON only) */
+
+ WOL_PATT_CNT_0 = 0x0f38,/* 32 bit WOL Pattern Counter 3..0 */
+ WOL_PATT_CNT_4 = 0x0f3c,/* 24 bit WOL Pattern Counter 6..4 */
+};
+
+enum {
+ WOL_PATT_RAM_1 = 0x1000,/* WOL Pattern RAM Link 1 */
+ WOL_PATT_RAM_2 = 0x1400,/* WOL Pattern RAM Link 2 */
+};
+
+enum {
+ BASE_XMAC_1 = 0x2000,/* XMAC 1 registers */
+ BASE_GMAC_1 = 0x2800,/* GMAC 1 registers */
+ BASE_XMAC_2 = 0x3000,/* XMAC 2 registers */
+ BASE_GMAC_2 = 0x3800,/* GMAC 2 registers */
+};
+
+/*
+ * Receive Frame Status Encoding
+ */
+enum {
+ XMR_FS_LEN = 0x3fff<<18, /* Bit 31..18: Rx Frame Length */
+ XMR_FS_2L_VLAN = 1<<17, /* Bit 17: tagged wh 2Lev VLAN ID*/
+ XMR_FS_1_VLAN = 1<<16, /* Bit 16: tagged wh 1ev VLAN ID*/
+ XMR_FS_BC = 1<<15, /* Bit 15: Broadcast Frame */
+ XMR_FS_MC = 1<<14, /* Bit 14: Multicast Frame */
+ XMR_FS_UC = 1<<13, /* Bit 13: Unicast Frame */
+
+ XMR_FS_BURST = 1<<11, /* Bit 11: Burst Mode */
+ XMR_FS_CEX_ERR = 1<<10, /* Bit 10: Carrier Ext. Error */
+ XMR_FS_802_3 = 1<<9, /* Bit 9: 802.3 Frame */
+ XMR_FS_COL_ERR = 1<<8, /* Bit 8: Collision Error */
+ XMR_FS_CAR_ERR = 1<<7, /* Bit 7: Carrier Event Error */
+ XMR_FS_LEN_ERR = 1<<6, /* Bit 6: In-Range Length Error */
+ XMR_FS_FRA_ERR = 1<<5, /* Bit 5: Framing Error */
+ XMR_FS_RUNT = 1<<4, /* Bit 4: Runt Frame */
+ XMR_FS_LNG_ERR = 1<<3, /* Bit 3: Giant (Jumbo) Frame */
+ XMR_FS_FCS_ERR = 1<<2, /* Bit 2: Frame Check Sequ Err */
+ XMR_FS_ERR = 1<<1, /* Bit 1: Frame Error */
+ XMR_FS_MCTRL = 1<<0, /* Bit 0: MAC Control Packet */
+
+/*
+ * XMR_FS_ERR will be set if
+ * XMR_FS_FCS_ERR, XMR_FS_LNG_ERR, XMR_FS_RUNT,
+ * XMR_FS_FRA_ERR, XMR_FS_LEN_ERR, or XMR_FS_CEX_ERR
+ * is set. XMR_FS_LNG_ERR and XMR_FS_LEN_ERR will issue
+ * XMR_FS_ERR unless the corresponding bit in the Receive Command
+ * Register is set.
+ */
+};
+
+/*
+,* XMAC-PHY Registers, indirect addressed over the XMAC
+ */
+enum {
+ PHY_XMAC_CTRL = 0x00,/* 16 bit r/w PHY Control Register */
+ PHY_XMAC_STAT = 0x01,/* 16 bit r/w PHY Status Register */
+ PHY_XMAC_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */
+ PHY_XMAC_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */
+ PHY_XMAC_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */
+ PHY_XMAC_AUNE_LP = 0x05,/* 16 bit r/o Link Partner Abi Reg */
+ PHY_XMAC_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */
+ PHY_XMAC_NEPG = 0x07,/* 16 bit r/w Next Page Register */
+ PHY_XMAC_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */
+
+ PHY_XMAC_EXT_STAT = 0x0f,/* 16 bit r/o Ext Status Register */
+ PHY_XMAC_RES_ABI = 0x10,/* 16 bit r/o PHY Resolved Ability */
+};
+/*
+ * Broadcom-PHY Registers, indirect addressed over XMAC
+ */
+enum {
+ PHY_BCOM_CTRL = 0x00,/* 16 bit r/w PHY Control Register */
+ PHY_BCOM_STAT = 0x01,/* 16 bit r/o PHY Status Register */
+ PHY_BCOM_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */
+ PHY_BCOM_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */
+ PHY_BCOM_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */
+ PHY_BCOM_AUNE_LP = 0x05,/* 16 bit r/o Link Part Ability Reg */
+ PHY_BCOM_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */
+ PHY_BCOM_NEPG = 0x07,/* 16 bit r/w Next Page Register */
+ PHY_BCOM_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */
+ /* Broadcom-specific registers */
+ PHY_BCOM_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */
+ PHY_BCOM_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */
+ PHY_BCOM_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Reg */
+ PHY_BCOM_P_EXT_CTRL = 0x10,/* 16 bit r/w PHY Extended Ctrl Reg */
+ PHY_BCOM_P_EXT_STAT = 0x11,/* 16 bit r/o PHY Extended Stat Reg */
+ PHY_BCOM_RE_CTR = 0x12,/* 16 bit r/w Receive Error Counter */
+ PHY_BCOM_FC_CTR = 0x13,/* 16 bit r/w False Carrier Sense Cnt */
+ PHY_BCOM_RNO_CTR = 0x14,/* 16 bit r/w Receiver NOT_OK Cnt */
+
+ PHY_BCOM_AUX_CTRL = 0x18,/* 16 bit r/w Auxiliary Control Reg */
+ PHY_BCOM_AUX_STAT = 0x19,/* 16 bit r/o Auxiliary Stat Summary */
+ PHY_BCOM_INT_STAT = 0x1a,/* 16 bit r/o Interrupt Status Reg */
+ PHY_BCOM_INT_MASK = 0x1b,/* 16 bit r/w Interrupt Mask Reg */
+};
+
+/*
+ * Marvel-PHY Registers, indirect addressed over GMAC
+ */
+enum {
+ PHY_MARV_CTRL = 0x00,/* 16 bit r/w PHY Control Register */
+ PHY_MARV_STAT = 0x01,/* 16 bit r/o PHY Status Register */
+ PHY_MARV_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */
+ PHY_MARV_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */
+ PHY_MARV_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */
+ PHY_MARV_AUNE_LP = 0x05,/* 16 bit r/o Link Part Ability Reg */
+ PHY_MARV_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */
+ PHY_MARV_NEPG = 0x07,/* 16 bit r/w Next Page Register */
+ PHY_MARV_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */
+ /* Marvel-specific registers */
+ PHY_MARV_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */
+ PHY_MARV_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */
+ PHY_MARV_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Reg */
+ PHY_MARV_PHY_CTRL = 0x10,/* 16 bit r/w PHY Specific Ctrl Reg */
+ PHY_MARV_PHY_STAT = 0x11,/* 16 bit r/o PHY Specific Stat Reg */
+ PHY_MARV_INT_MASK = 0x12,/* 16 bit r/w Interrupt Mask Reg */
+ PHY_MARV_INT_STAT = 0x13,/* 16 bit r/o Interrupt Status Reg */
+ PHY_MARV_EXT_CTRL = 0x14,/* 16 bit r/w Ext. PHY Specific Ctrl */
+ PHY_MARV_RXE_CNT = 0x15,/* 16 bit r/w Receive Error Counter */
+ PHY_MARV_EXT_ADR = 0x16,/* 16 bit r/w Ext. Ad. for Cable Diag. */
+ PHY_MARV_PORT_IRQ = 0x17,/* 16 bit r/o Port 0 IRQ (88E1111 only) */
+ PHY_MARV_LED_CTRL = 0x18,/* 16 bit r/w LED Control Reg */
+ PHY_MARV_LED_OVER = 0x19,/* 16 bit r/w Manual LED Override Reg */
+ PHY_MARV_EXT_CTRL_2 = 0x1a,/* 16 bit r/w Ext. PHY Specific Ctrl 2 */
+ PHY_MARV_EXT_P_STAT = 0x1b,/* 16 bit r/w Ext. PHY Spec. Stat Reg */
+ PHY_MARV_CABLE_DIAG = 0x1c,/* 16 bit r/o Cable Diagnostic Reg */
+ PHY_MARV_PAGE_ADDR = 0x1d,/* 16 bit r/w Extended Page Address Reg */
+ PHY_MARV_PAGE_DATA = 0x1e,/* 16 bit r/w Extended Page Data Reg */
+
+/* for 10/100 Fast Ethernet PHY (88E3082 only) */
+ PHY_MARV_FE_LED_PAR = 0x16,/* 16 bit r/w LED Parallel Select Reg. */
+ PHY_MARV_FE_LED_SER = 0x17,/* 16 bit r/w LED Stream Select S. LED */
+ PHY_MARV_FE_VCT_TX = 0x1a,/* 16 bit r/w VCT Reg. for TXP/N Pins */
+ PHY_MARV_FE_VCT_RX = 0x1b,/* 16 bit r/o VCT Reg. for RXP/N Pins */
+ PHY_MARV_FE_SPEC_2 = 0x1c,/* 16 bit r/w Specific Control Reg. 2 */
+};
+
+/* Level One-PHY Registers, indirect addressed over XMAC */
+enum {
+ PHY_LONE_CTRL = 0x00,/* 16 bit r/w PHY Control Register */
+ PHY_LONE_STAT = 0x01,/* 16 bit r/o PHY Status Register */
+ PHY_LONE_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */
+ PHY_LONE_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */
+ PHY_LONE_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */
+ PHY_LONE_AUNE_LP = 0x05,/* 16 bit r/o Link Part Ability Reg */
+ PHY_LONE_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */
+ PHY_LONE_NEPG = 0x07,/* 16 bit r/w Next Page Register */
+ PHY_LONE_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */
+ /* Level One-specific registers */
+ PHY_LONE_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */
+ PHY_LONE_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */
+ PHY_LONE_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Reg */
+ PHY_LONE_PORT_CFG = 0x10,/* 16 bit r/w Port Configuration Reg*/
+ PHY_LONE_Q_STAT = 0x11,/* 16 bit r/o Quick Status Reg */
+ PHY_LONE_INT_ENAB = 0x12,/* 16 bit r/w Interrupt Enable Reg */
+ PHY_LONE_INT_STAT = 0x13,/* 16 bit r/o Interrupt Status Reg */
+ PHY_LONE_LED_CFG = 0x14,/* 16 bit r/w LED Configuration Reg */
+ PHY_LONE_PORT_CTRL = 0x15,/* 16 bit r/w Port Control Reg */
+ PHY_LONE_CIM = 0x16,/* 16 bit r/o CIM Reg */
+};
+
+/* National-PHY Registers, indirect addressed over XMAC */
+enum {
+ PHY_NAT_CTRL = 0x00,/* 16 bit r/w PHY Control Register */
+ PHY_NAT_STAT = 0x01,/* 16 bit r/w PHY Status Register */
+ PHY_NAT_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */
+ PHY_NAT_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */
+ PHY_NAT_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */
+ PHY_NAT_AUNE_LP = 0x05,/* 16 bit r/o Link Partner Ability Reg */
+ PHY_NAT_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */
+ PHY_NAT_NEPG = 0x07,/* 16 bit r/w Next Page Register */
+ PHY_NAT_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner Reg */
+ /* National-specific registers */
+ PHY_NAT_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */
+ PHY_NAT_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */
+ PHY_NAT_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Register */
+ PHY_NAT_EXT_CTRL1 = 0x10,/* 16 bit r/o Extended Control Reg1 */
+ PHY_NAT_Q_STAT1 = 0x11,/* 16 bit r/o Quick Status Reg1 */
+ PHY_NAT_10B_OP = 0x12,/* 16 bit r/o 10Base-T Operations Reg */
+ PHY_NAT_EXT_CTRL2 = 0x13,/* 16 bit r/o Extended Control Reg1 */
+ PHY_NAT_Q_STAT2 = 0x14,/* 16 bit r/o Quick Status Reg2 */
+
+ PHY_NAT_PHY_ADDR = 0x19,/* 16 bit r/o PHY Address Register */
+};
+
+enum {
+ PHY_CT_RESET = 1<<15, /* Bit 15: (sc) clear all PHY related regs */
+ PHY_CT_LOOP = 1<<14, /* Bit 14: enable Loopback over PHY */
+ PHY_CT_SPS_LSB = 1<<13, /* Bit 13: Speed select, lower bit */
+ PHY_CT_ANE = 1<<12, /* Bit 12: Auto-Negotiation Enabled */
+ PHY_CT_PDOWN = 1<<11, /* Bit 11: Power Down Mode */
+ PHY_CT_ISOL = 1<<10, /* Bit 10: Isolate Mode */
+ PHY_CT_RE_CFG = 1<<9, /* Bit 9: (sc) Restart Auto-Negotiation */
+ PHY_CT_DUP_MD = 1<<8, /* Bit 8: Duplex Mode */
+ PHY_CT_COL_TST = 1<<7, /* Bit 7: Collision Test enabled */
+ PHY_CT_SPS_MSB = 1<<6, /* Bit 6: Speed select, upper bit */
+};
+
+enum {
+ PHY_CT_SP1000 = PHY_CT_SPS_MSB, /* enable speed of 1000 Mbps */
+ PHY_CT_SP100 = PHY_CT_SPS_LSB, /* enable speed of 100 Mbps */
+ PHY_CT_SP10 = 0, /* enable speed of 10 Mbps */
+};
+
+enum {
+ PHY_ST_EXT_ST = 1<<8, /* Bit 8: Extended Status Present */
+
+ PHY_ST_PRE_SUP = 1<<6, /* Bit 6: Preamble Suppression */
+ PHY_ST_AN_OVER = 1<<5, /* Bit 5: Auto-Negotiation Over */
+ PHY_ST_REM_FLT = 1<<4, /* Bit 4: Remote Fault Condition Occured */
+ PHY_ST_AN_CAP = 1<<3, /* Bit 3: Auto-Negotiation Capability */
+ PHY_ST_LSYNC = 1<<2, /* Bit 2: Link Synchronized */
+ PHY_ST_JAB_DET = 1<<1, /* Bit 1: Jabber Detected */
+ PHY_ST_EXT_REG = 1<<0, /* Bit 0: Extended Register available */
+};
+
+enum {
+ PHY_I1_OUI_MSK = 0x3f<<10, /* Bit 15..10: Organization Unique ID */
+ PHY_I1_MOD_NUM = 0x3f<<4, /* Bit 9.. 4: Model Number */
+ PHY_I1_REV_MSK = 0xf, /* Bit 3.. 0: Revision Number */
+};
+
+/* different Broadcom PHY Ids */
+enum {
+ PHY_BCOM_ID1_A1 = 0x6041,
+ PHY_BCOM_ID1_B2 = 0x6043,
+ PHY_BCOM_ID1_C0 = 0x6044,
+ PHY_BCOM_ID1_C5 = 0x6047,
+};
+
+/* different Marvell PHY Ids */
+enum {
+ PHY_MARV_ID0_VAL= 0x0141, /* Marvell Unique Identifier */
+ PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */
+ PHY_MARV_ID1_B2 = 0x0C25, /* Yukon-Plus (PHY 88E1011) */
+ PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */
+ PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */
+};
+
+enum {
+ PHY_AN_NXT_PG = 1<<15, /* Bit 15: Request Next Page */
+ PHY_X_AN_ACK = 1<<14, /* Bit 14: (ro) Acknowledge Received */
+ PHY_X_AN_RFB = 3<<12,/* Bit 13..12: Remote Fault Bits */
+
+ PHY_X_AN_PAUSE = 3<<7,/* Bit 8.. 7: Pause Bits */
+ PHY_X_AN_HD = 1<<6, /* Bit 6: Half Duplex */
+ PHY_X_AN_FD = 1<<5, /* Bit 5: Full Duplex */
+};
+
+enum {
+ PHY_B_AN_RF = 1<<13, /* Bit 13: Remote Fault */
+
+ PHY_B_AN_ASP = 1<<11, /* Bit 11: Asymmetric Pause */
+ PHY_B_AN_PC = 1<<10, /* Bit 10: Pause Capable */
+ PHY_B_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/
+};
+
+enum {
+ PHY_L_AN_RF = 1<<13, /* Bit 13: Remote Fault */
+ /* Bit 12: reserved */
+ PHY_L_AN_ASP = 1<<11, /* Bit 11: Asymmetric Pause */
+ PHY_L_AN_PC = 1<<10, /* Bit 10: Pause Capable */
+
+ PHY_L_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/
+};
+
+/* PHY_NAT_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement */
+/* PHY_NAT_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/
+/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */
+enum {
+ PHY_N_AN_RF = 1<<13, /* Bit 13: Remote Fault */
+
+ PHY_N_AN_100F = 1<<11, /* Bit 11: 100Base-T2 FD Support */
+ PHY_N_AN_100H = 1<<10, /* Bit 10: 100Base-T2 HD Support */
+
+ PHY_N_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/
+};
+
+/* field type definition for PHY_x_AN_SEL */
+enum {
+ PHY_SEL_TYPE = 1, /* 00001 = Ethernet */
+};
+
+enum {
+ PHY_ANE_LP_NP = 1<<3, /* Bit 3: Link Partner can Next Page */
+ PHY_ANE_LOC_NP = 1<<2, /* Bit 2: Local PHY can Next Page */
+ PHY_ANE_RX_PG = 1<<1, /* Bit 1: Page Received */
+};
+
+enum {
+ PHY_ANE_PAR_DF = 1<<4, /* Bit 4: Parallel Detection Fault */
+
+ PHY_ANE_LP_CAP = 1<<0, /* Bit 0: Link Partner Auto-Neg. Cap. */
+};
+
+enum {
+ PHY_NP_MORE = 1<<15, /* Bit 15: More, Next Pages to follow */
+ PHY_NP_ACK1 = 1<<14, /* Bit 14: (ro) Ack1, for receiving a message */
+ PHY_NP_MSG_VAL = 1<<13, /* Bit 13: Message Page valid */
+ PHY_NP_ACK2 = 1<<12, /* Bit 12: Ack2, comply with msg content */
+ PHY_NP_TOG = 1<<11, /* Bit 11: Toggle Bit, ensure sync */
+ PHY_NP_MSG = 0x07ff, /* Bit 10..0: Message from/to Link Partner */
+};
+
+enum {
+ PHY_X_EX_FD = 1<<15, /* Bit 15: Device Supports Full Duplex */
+ PHY_X_EX_HD = 1<<14, /* Bit 14: Device Supports Half Duplex */
+};
+
+enum {
+ PHY_X_RS_PAUSE = 3<<7,/* Bit 8..7: selected Pause Mode */
+ PHY_X_RS_HD = 1<<6, /* Bit 6: Half Duplex Mode selected */
+ PHY_X_RS_FD = 1<<5, /* Bit 5: Full Duplex Mode selected */
+ PHY_X_RS_ABLMIS = 1<<4, /* Bit 4: duplex or pause cap mismatch */
+ PHY_X_RS_PAUMIS = 1<<3, /* Bit 3: pause capability mismatch */
+};
+
+/** Remote Fault Bits (PHY_X_AN_RFB) encoding */
+enum {
+ X_RFB_OK = 0<<12,/* Bit 13..12 No errors, Link OK */
+ X_RFB_LF = 1<<12, /* Bit 13..12 Link Failure */
+ X_RFB_OFF = 2<<12,/* Bit 13..12 Offline */
+ X_RFB_AN_ERR = 3<<12,/* Bit 13..12 Auto-Negotiation Error */
+};
+
+/* Pause Bits (PHY_X_AN_PAUSE and PHY_X_RS_PAUSE) encoding */
+enum {
+ PHY_X_P_NO_PAUSE = 0<<7,/* Bit 8..7: no Pause Mode */
+ PHY_X_P_SYM_MD = 1<<7, /* Bit 8..7: symmetric Pause Mode */
+ PHY_X_P_ASYM_MD = 2<<7,/* Bit 8..7: asymmetric Pause Mode */
+ PHY_X_P_BOTH_MD = 3<<7,/* Bit 8..7: both Pause Mode */
+};
+
+
+/* Broadcom-Specific */
+/***** PHY_BCOM_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/
+enum {
+ PHY_B_1000C_TEST = 7<<13,/* Bit 15..13: Test Modes */
+ PHY_B_1000C_MSE = 1<<12, /* Bit 12: Master/Slave Enable */
+ PHY_B_1000C_MSC = 1<<11, /* Bit 11: M/S Configuration */
+ PHY_B_1000C_RD = 1<<10, /* Bit 10: Repeater/DTE */
+ PHY_B_1000C_AFD = 1<<9, /* Bit 9: Advertise Full Duplex */
+ PHY_B_1000C_AHD = 1<<8, /* Bit 8: Advertise Half Duplex */
+};
+
+/***** PHY_BCOM_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/
+/***** PHY_MARV_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/
+enum {
+ PHY_B_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */
+ PHY_B_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */
+ PHY_B_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */
+ PHY_B_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status */
+ PHY_B_1000S_LP_FD = 1<<11, /* Bit 11: Link Partner can FD */
+ PHY_B_1000S_LP_HD = 1<<10, /* Bit 10: Link Partner can HD */
+ /* Bit 9..8: reserved */
+ PHY_B_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */
+};
+
+/***** PHY_BCOM_EXT_STAT 16 bit r/o Extended Status Register *****/
+enum {
+ PHY_B_ES_X_FD_CAP = 1<<15, /* Bit 15: 1000Base-X FD capable */
+ PHY_B_ES_X_HD_CAP = 1<<14, /* Bit 14: 1000Base-X HD capable */
+ PHY_B_ES_T_FD_CAP = 1<<13, /* Bit 13: 1000Base-T FD capable */
+ PHY_B_ES_T_HD_CAP = 1<<12, /* Bit 12: 1000Base-T HD capable */
+};
+
+/***** PHY_BCOM_P_EXT_CTRL 16 bit r/w PHY Extended Control Reg *****/
+enum {
+ PHY_B_PEC_MAC_PHY = 1<<15, /* Bit 15: 10BIT/GMI-Interface */
+ PHY_B_PEC_DIS_CROSS = 1<<14, /* Bit 14: Disable MDI Crossover */
+ PHY_B_PEC_TX_DIS = 1<<13, /* Bit 13: Tx output Disabled */
+ PHY_B_PEC_INT_DIS = 1<<12, /* Bit 12: Interrupts Disabled */
+ PHY_B_PEC_F_INT = 1<<11, /* Bit 11: Force Interrupt */
+ PHY_B_PEC_BY_45 = 1<<10, /* Bit 10: Bypass 4B5B-Decoder */
+ PHY_B_PEC_BY_SCR = 1<<9, /* Bit 9: Bypass Scrambler */
+ PHY_B_PEC_BY_MLT3 = 1<<8, /* Bit 8: Bypass MLT3 Encoder */
+ PHY_B_PEC_BY_RXA = 1<<7, /* Bit 7: Bypass Rx Alignm. */
+ PHY_B_PEC_RES_SCR = 1<<6, /* Bit 6: Reset Scrambler */
+ PHY_B_PEC_EN_LTR = 1<<5, /* Bit 5: Ena LED Traffic Mode */
+ PHY_B_PEC_LED_ON = 1<<4, /* Bit 4: Force LED's on */
+ PHY_B_PEC_LED_OFF = 1<<3, /* Bit 3: Force LED's off */
+ PHY_B_PEC_EX_IPG = 1<<2, /* Bit 2: Extend Tx IPG Mode */
+ PHY_B_PEC_3_LED = 1<<1, /* Bit 1: Three Link LED mode */
+ PHY_B_PEC_HIGH_LA = 1<<0, /* Bit 0: GMII FIFO Elasticy */
+};
+
+/***** PHY_BCOM_P_EXT_STAT 16 bit r/o PHY Extended Status Reg *****/
+enum {
+ PHY_B_PES_CROSS_STAT = 1<<13, /* Bit 13: MDI Crossover Status */
+ PHY_B_PES_INT_STAT = 1<<12, /* Bit 12: Interrupt Status */
+ PHY_B_PES_RRS = 1<<11, /* Bit 11: Remote Receiver Stat. */
+ PHY_B_PES_LRS = 1<<10, /* Bit 10: Local Receiver Stat. */
+ PHY_B_PES_LOCKED = 1<<9, /* Bit 9: Locked */
+ PHY_B_PES_LS = 1<<8, /* Bit 8: Link Status */
+ PHY_B_PES_RF = 1<<7, /* Bit 7: Remote Fault */
+ PHY_B_PES_CE_ER = 1<<6, /* Bit 6: Carrier Ext Error */
+ PHY_B_PES_BAD_SSD = 1<<5, /* Bit 5: Bad SSD */
+ PHY_B_PES_BAD_ESD = 1<<4, /* Bit 4: Bad ESD */
+ PHY_B_PES_RX_ER = 1<<3, /* Bit 3: Receive Error */
+ PHY_B_PES_TX_ER = 1<<2, /* Bit 2: Transmit Error */
+ PHY_B_PES_LOCK_ER = 1<<1, /* Bit 1: Lock Error */
+ PHY_B_PES_MLT3_ER = 1<<0, /* Bit 0: MLT3 code Error */
+};
+
+/***** PHY_BCOM_FC_CTR 16 bit r/w False Carrier Counter *****/
+enum {
+ PHY_B_FC_CTR = 0xff, /* Bit 7..0: False Carrier Counter */
+
+/***** PHY_BCOM_RNO_CTR 16 bit r/w Receive NOT_OK Counter *****/
+ PHY_B_RC_LOC_MSK = 0xff00, /* Bit 15..8: Local Rx NOT_OK cnt */
+ PHY_B_RC_REM_MSK = 0x00ff, /* Bit 7..0: Remote Rx NOT_OK cnt */
+
+/***** PHY_BCOM_AUX_CTRL 16 bit r/w Auxiliary Control Reg *****/
+ PHY_B_AC_L_SQE = 1<<15, /* Bit 15: Low Squelch */
+ PHY_B_AC_LONG_PACK = 1<<14, /* Bit 14: Rx Long Packets */
+ PHY_B_AC_ER_CTRL = 3<<12,/* Bit 13..12: Edgerate Control */
+ /* Bit 11: reserved */
+ PHY_B_AC_TX_TST = 1<<10, /* Bit 10: Tx test bit, always 1 */
+ /* Bit 9.. 8: reserved */
+ PHY_B_AC_DIS_PRF = 1<<7, /* Bit 7: dis part resp filter */
+ /* Bit 6: reserved */
+ PHY_B_AC_DIS_PM = 1<<5, /* Bit 5: dis power management */
+ /* Bit 4: reserved */
+ PHY_B_AC_DIAG = 1<<3, /* Bit 3: Diagnostic Mode */
+};
+
+/***** PHY_BCOM_AUX_STAT 16 bit r/o Auxiliary Status Reg *****/
+enum {
+ PHY_B_AS_AN_C = 1<<15, /* Bit 15: AutoNeg complete */
+ PHY_B_AS_AN_CA = 1<<14, /* Bit 14: AN Complete Ack */
+ PHY_B_AS_ANACK_D = 1<<13, /* Bit 13: AN Ack Detect */
+ PHY_B_AS_ANAB_D = 1<<12, /* Bit 12: AN Ability Detect */
+ PHY_B_AS_NPW = 1<<11, /* Bit 11: AN Next Page Wait */
+ PHY_B_AS_AN_RES_MSK = 7<<8,/* Bit 10..8: AN HDC */
+ PHY_B_AS_PDF = 1<<7, /* Bit 7: Parallel Detect. Fault */
+ PHY_B_AS_RF = 1<<6, /* Bit 6: Remote Fault */
+ PHY_B_AS_ANP_R = 1<<5, /* Bit 5: AN Page Received */
+ PHY_B_AS_LP_ANAB = 1<<4, /* Bit 4: LP AN Ability */
+ PHY_B_AS_LP_NPAB = 1<<3, /* Bit 3: LP Next Page Ability */
+ PHY_B_AS_LS = 1<<2, /* Bit 2: Link Status */
+ PHY_B_AS_PRR = 1<<1, /* Bit 1: Pause Resolution-Rx */
+ PHY_B_AS_PRT = 1<<0, /* Bit 0: Pause Resolution-Tx */
+};
+#define PHY_B_AS_PAUSE_MSK (PHY_B_AS_PRR | PHY_B_AS_PRT)
+
+/***** PHY_BCOM_INT_STAT 16 bit r/o Interrupt Status Reg *****/
+/***** PHY_BCOM_INT_MASK 16 bit r/w Interrupt Mask Reg *****/
+enum {
+ PHY_B_IS_PSE = 1<<14, /* Bit 14: Pair Swap Error */
+ PHY_B_IS_MDXI_SC = 1<<13, /* Bit 13: MDIX Status Change */
+ PHY_B_IS_HCT = 1<<12, /* Bit 12: counter above 32k */
+ PHY_B_IS_LCT = 1<<11, /* Bit 11: counter above 128 */
+ PHY_B_IS_AN_PR = 1<<10, /* Bit 10: Page Received */
+ PHY_B_IS_NO_HDCL = 1<<9, /* Bit 9: No HCD Link */
+ PHY_B_IS_NO_HDC = 1<<8, /* Bit 8: No HCD */
+ PHY_B_IS_NEG_USHDC = 1<<7, /* Bit 7: Negotiated Unsup. HCD */
+ PHY_B_IS_SCR_S_ER = 1<<6, /* Bit 6: Scrambler Sync Error */
+ PHY_B_IS_RRS_CHANGE = 1<<5, /* Bit 5: Remote Rx Stat Change */
+ PHY_B_IS_LRS_CHANGE = 1<<4, /* Bit 4: Local Rx Stat Change */
+ PHY_B_IS_DUP_CHANGE = 1<<3, /* Bit 3: Duplex Mode Change */
+ PHY_B_IS_LSP_CHANGE = 1<<2, /* Bit 2: Link Speed Change */
+ PHY_B_IS_LST_CHANGE = 1<<1, /* Bit 1: Link Status Changed */
+ PHY_B_IS_CRC_ER = 1<<0, /* Bit 0: CRC Error */
+};
+#define PHY_B_DEF_MSK (~(PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE))
+
+/* Pause Bits (PHY_B_AN_ASP and PHY_B_AN_PC) encoding */
+enum {
+ PHY_B_P_NO_PAUSE = 0<<10,/* Bit 11..10: no Pause Mode */
+ PHY_B_P_SYM_MD = 1<<10, /* Bit 11..10: symmetric Pause Mode */
+ PHY_B_P_ASYM_MD = 2<<10,/* Bit 11..10: asymmetric Pause Mode */
+ PHY_B_P_BOTH_MD = 3<<10,/* Bit 11..10: both Pause Mode */
+};
+/*
+ * Resolved Duplex mode and Capabilities (Aux Status Summary Reg)
+ */
+enum {
+ PHY_B_RES_1000FD = 7<<8,/* Bit 10..8: 1000Base-T Full Dup. */
+ PHY_B_RES_1000HD = 6<<8,/* Bit 10..8: 1000Base-T Half Dup. */
+};
+
+/*
+ * Level One-Specific
+ */
+/***** PHY_LONE_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/
+enum {
+ PHY_L_1000C_TEST = 7<<13,/* Bit 15..13: Test Modes */
+ PHY_L_1000C_MSE = 1<<12, /* Bit 12: Master/Slave Enable */
+ PHY_L_1000C_MSC = 1<<11, /* Bit 11: M/S Configuration */
+ PHY_L_1000C_RD = 1<<10, /* Bit 10: Repeater/DTE */
+ PHY_L_1000C_AFD = 1<<9, /* Bit 9: Advertise Full Duplex */
+ PHY_L_1000C_AHD = 1<<8, /* Bit 8: Advertise Half Duplex */
+};
+
+/***** PHY_LONE_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/
+enum {
+ PHY_L_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */
+ PHY_L_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */
+ PHY_L_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */
+ PHY_L_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status */
+ PHY_L_1000S_LP_FD = 1<<11, /* Bit 11: Link Partner can FD */
+ PHY_L_1000S_LP_HD = 1<<10, /* Bit 10: Link Partner can HD */
+
+ PHY_L_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */
+
+/***** PHY_LONE_EXT_STAT 16 bit r/o Extended Status Register *****/
+ PHY_L_ES_X_FD_CAP = 1<<15, /* Bit 15: 1000Base-X FD capable */
+ PHY_L_ES_X_HD_CAP = 1<<14, /* Bit 14: 1000Base-X HD capable */
+ PHY_L_ES_T_FD_CAP = 1<<13, /* Bit 13: 1000Base-T FD capable */
+ PHY_L_ES_T_HD_CAP = 1<<12, /* Bit 12: 1000Base-T HD capable */
+};
+
+/***** PHY_LONE_PORT_CFG 16 bit r/w Port Configuration Reg *****/
+enum {
+ PHY_L_PC_REP_MODE = 1<<15, /* Bit 15: Repeater Mode */
+
+ PHY_L_PC_TX_DIS = 1<<13, /* Bit 13: Tx output Disabled */
+ PHY_L_PC_BY_SCR = 1<<12, /* Bit 12: Bypass Scrambler */
+ PHY_L_PC_BY_45 = 1<<11, /* Bit 11: Bypass 4B5B-Decoder */
+ PHY_L_PC_JAB_DIS = 1<<10, /* Bit 10: Jabber Disabled */
+ PHY_L_PC_SQE = 1<<9, /* Bit 9: Enable Heartbeat */
+ PHY_L_PC_TP_LOOP = 1<<8, /* Bit 8: TP Loopback */
+ PHY_L_PC_SSS = 1<<7, /* Bit 7: Smart Speed Selection */
+ PHY_L_PC_FIFO_SIZE = 1<<6, /* Bit 6: FIFO Size */
+ PHY_L_PC_PRE_EN = 1<<5, /* Bit 5: Preamble Enable */
+ PHY_L_PC_CIM = 1<<4, /* Bit 4: Carrier Integrity Mon */
+ PHY_L_PC_10_SER = 1<<3, /* Bit 3: Use Serial Output */
+ PHY_L_PC_ANISOL = 1<<2, /* Bit 2: Unisolate Port */
+ PHY_L_PC_TEN_BIT = 1<<1, /* Bit 1: 10bit iface mode on */
+ PHY_L_PC_ALTCLOCK = 1<<0, /* Bit 0: (ro) ALTCLOCK Mode on */
+};
+
+/***** PHY_LONE_Q_STAT 16 bit r/o Quick Status Reg *****/
+enum {
+ PHY_L_QS_D_RATE = 3<<14,/* Bit 15..14: Data Rate */
+ PHY_L_QS_TX_STAT = 1<<13, /* Bit 13: Transmitting */
+ PHY_L_QS_RX_STAT = 1<<12, /* Bit 12: Receiving */
+ PHY_L_QS_COL_STAT = 1<<11, /* Bit 11: Collision */
+ PHY_L_QS_L_STAT = 1<<10, /* Bit 10: Link is up */
+ PHY_L_QS_DUP_MOD = 1<<9, /* Bit 9: Full/Half Duplex */
+ PHY_L_QS_AN = 1<<8, /* Bit 8: AutoNeg is On */
+ PHY_L_QS_AN_C = 1<<7, /* Bit 7: AN is Complete */
+ PHY_L_QS_LLE = 7<<4,/* Bit 6..4: Line Length Estim. */
+ PHY_L_QS_PAUSE = 1<<3, /* Bit 3: LP advertised Pause */
+ PHY_L_QS_AS_PAUSE = 1<<2, /* Bit 2: LP adv. asym. Pause */
+ PHY_L_QS_ISOLATE = 1<<1, /* Bit 1: CIM Isolated */
+ PHY_L_QS_EVENT = 1<<0, /* Bit 0: Event has occurred */
+};
+
+/***** PHY_LONE_INT_ENAB 16 bit r/w Interrupt Enable Reg *****/
+/***** PHY_LONE_INT_STAT 16 bit r/o Interrupt Status Reg *****/
+enum {
+ PHY_L_IS_AN_F = 1<<13, /* Bit 13: Auto-Negotiation fault */
+ PHY_L_IS_CROSS = 1<<11, /* Bit 11: Crossover used */
+ PHY_L_IS_POL = 1<<10, /* Bit 10: Polarity correct. used */
+ PHY_L_IS_SS = 1<<9, /* Bit 9: Smart Speed Downgrade */
+ PHY_L_IS_CFULL = 1<<8, /* Bit 8: Counter Full */
+ PHY_L_IS_AN_C = 1<<7, /* Bit 7: AutoNeg Complete */
+ PHY_L_IS_SPEED = 1<<6, /* Bit 6: Speed Changed */
+ PHY_L_IS_DUP = 1<<5, /* Bit 5: Duplex Changed */
+ PHY_L_IS_LS = 1<<4, /* Bit 4: Link Status Changed */
+ PHY_L_IS_ISOL = 1<<3, /* Bit 3: Isolate Occured */
+ PHY_L_IS_MDINT = 1<<2, /* Bit 2: (ro) STAT: MII Int Pending */
+ PHY_L_IS_INTEN = 1<<1, /* Bit 1: ENAB: Enable IRQs */
+ PHY_L_IS_FORCE = 1<<0, /* Bit 0: ENAB: Force Interrupt */
+};
+
+/* int. mask */
+#define PHY_L_DEF_MSK (PHY_L_IS_LS | PHY_L_IS_ISOL | PHY_L_IS_INTEN)
+
+/***** PHY_LONE_LED_CFG 16 bit r/w LED Configuration Reg *****/
+enum {
+ PHY_L_LC_LEDC = 3<<14,/* Bit 15..14: Col/Blink/On/Off */
+ PHY_L_LC_LEDR = 3<<12,/* Bit 13..12: Rx/Blink/On/Off */
+ PHY_L_LC_LEDT = 3<<10,/* Bit 11..10: Tx/Blink/On/Off */
+ PHY_L_LC_LEDG = 3<<8,/* Bit 9..8: Giga/Blink/On/Off */
+ PHY_L_LC_LEDS = 3<<6,/* Bit 7..6: 10-100/Blink/On/Off */
+ PHY_L_LC_LEDL = 3<<4,/* Bit 5..4: Link/Blink/On/Off */
+ PHY_L_LC_LEDF = 3<<2,/* Bit 3..2: Duplex/Blink/On/Off */
+ PHY_L_LC_PSTRECH= 1<<1, /* Bit 1: Strech LED Pulses */
+ PHY_L_LC_FREQ = 1<<0, /* Bit 0: 30/100 ms */
+};
+
+/***** PHY_LONE_PORT_CTRL 16 bit r/w Port Control Reg *****/
+enum {
+ PHY_L_PC_TX_TCLK = 1<<15, /* Bit 15: Enable TX_TCLK */
+ PHY_L_PC_ALT_NP = 1<<13, /* Bit 14: Alternate Next Page */
+ PHY_L_PC_GMII_ALT= 1<<12, /* Bit 13: Alternate GMII driver */
+ PHY_L_PC_TEN_CRS = 1<<10, /* Bit 10: Extend CRS*/
+};
+
+/***** PHY_LONE_CIM 16 bit r/o CIM Reg *****/
+enum {
+ PHY_L_CIM_ISOL = 0xff<<8,/* Bit 15..8: Isolate Count */
+ PHY_L_CIM_FALSE_CAR = 0xff, /* Bit 7..0: False Carrier Count */
+};
+
+/*
+ * Pause Bits (PHY_L_AN_ASP and PHY_L_AN_PC) encoding
+ */
+enum {
+ PHY_L_P_NO_PAUSE= 0<<10,/* Bit 11..10: no Pause Mode */
+ PHY_L_P_SYM_MD = 1<<10, /* Bit 11..10: symmetric Pause Mode */
+ PHY_L_P_ASYM_MD = 2<<10,/* Bit 11..10: asymmetric Pause Mode */
+ PHY_L_P_BOTH_MD = 3<<10,/* Bit 11..10: both Pause Mode */
+};
+
+/*
+ * National-Specific
+ */
+/***** PHY_NAT_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/
+enum {
+ PHY_N_1000C_TEST= 7<<13,/* Bit 15..13: Test Modes */
+ PHY_N_1000C_MSE = 1<<12, /* Bit 12: Master/Slave Enable */
+ PHY_N_1000C_MSC = 1<<11, /* Bit 11: M/S Configuration */
+ PHY_N_1000C_RD = 1<<10, /* Bit 10: Repeater/DTE */
+ PHY_N_1000C_AFD = 1<<9, /* Bit 9: Advertise Full Duplex */
+ PHY_N_1000C_AHD = 1<<8, /* Bit 8: Advertise Half Duplex */
+ PHY_N_1000C_APC = 1<<7, /* Bit 7: Asymmetric Pause Cap. */};
+
+
+/***** PHY_NAT_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/
+enum {
+ PHY_N_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */
+ PHY_N_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */
+ PHY_N_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */
+ PHY_N_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status*/
+ PHY_N_1000S_LP_FD= 1<<11, /* Bit 11: Link Partner can FD */
+ PHY_N_1000S_LP_HD= 1<<10, /* Bit 10: Link Partner can HD */
+ PHY_N_1000C_LP_APC= 1<<9, /* Bit 9: LP Asym. Pause Cap. */
+ PHY_N_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */
+};
+
+/***** PHY_NAT_EXT_STAT 16 bit r/o Extended Status Register *****/
+enum {
+ PHY_N_ES_X_FD_CAP= 1<<15, /* Bit 15: 1000Base-X FD capable */
+ PHY_N_ES_X_HD_CAP= 1<<14, /* Bit 14: 1000Base-X HD capable */
+ PHY_N_ES_T_FD_CAP= 1<<13, /* Bit 13: 1000Base-T FD capable */
+ PHY_N_ES_T_HD_CAP= 1<<12, /* Bit 12: 1000Base-T HD capable */
+};
+
+/** Marvell-Specific */
+enum {
+ PHY_M_AN_NXT_PG = 1<<15, /* Request Next Page */
+ PHY_M_AN_ACK = 1<<14, /* (ro) Acknowledge Received */
+ PHY_M_AN_RF = 1<<13, /* Remote Fault */
+
+ PHY_M_AN_ASP = 1<<11, /* Asymmetric Pause */
+ PHY_M_AN_PC = 1<<10, /* MAC Pause implemented */
+ PHY_M_AN_100_T4 = 1<<9, /* Not cap. 100Base-T4 (always 0) */
+ PHY_M_AN_100_FD = 1<<8, /* Advertise 100Base-TX Full Duplex */
+ PHY_M_AN_100_HD = 1<<7, /* Advertise 100Base-TX Half Duplex */
+ PHY_M_AN_10_FD = 1<<6, /* Advertise 10Base-TX Full Duplex */
+ PHY_M_AN_10_HD = 1<<5, /* Advertise 10Base-TX Half Duplex */
+ PHY_M_AN_SEL_MSK =0x1f<<4, /* Bit 4.. 0: Selector Field Mask */
+};
+
+/* special defines for FIBER (88E1011S only) */
+enum {
+ PHY_M_AN_ASP_X = 1<<8, /* Asymmetric Pause */
+ PHY_M_AN_PC_X = 1<<7, /* MAC Pause implemented */
+ PHY_M_AN_1000X_AHD = 1<<6, /* Advertise 10000Base-X Half Duplex */
+ PHY_M_AN_1000X_AFD = 1<<5, /* Advertise 10000Base-X Full Duplex */
+};
+
+/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */
+enum {
+ PHY_M_P_NO_PAUSE_X = 0<<7,/* Bit 8.. 7: no Pause Mode */
+ PHY_M_P_SYM_MD_X = 1<<7, /* Bit 8.. 7: symmetric Pause Mode */
+ PHY_M_P_ASYM_MD_X = 2<<7,/* Bit 8.. 7: asymmetric Pause Mode */
+ PHY_M_P_BOTH_MD_X = 3<<7,/* Bit 8.. 7: both Pause Mode */
+};
+
+/***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/
+enum {
+ PHY_M_1000C_TEST = 7<<13,/* Bit 15..13: Test Modes */
+ PHY_M_1000C_MSE = 1<<12, /* Manual Master/Slave Enable */
+ PHY_M_1000C_MSC = 1<<11, /* M/S Configuration (1=Master) */
+ PHY_M_1000C_MPD = 1<<10, /* Multi-Port Device */
+ PHY_M_1000C_AFD = 1<<9, /* Advertise Full Duplex */
+ PHY_M_1000C_AHD = 1<<8, /* Advertise Half Duplex */
+};
+
+/***** PHY_MARV_PHY_CTRL 16 bit r/w PHY Specific Ctrl Reg *****/
+enum {
+ PHY_M_PC_TX_FFD_MSK = 3<<14,/* Bit 15..14: Tx FIFO Depth Mask */
+ PHY_M_PC_RX_FFD_MSK = 3<<12,/* Bit 13..12: Rx FIFO Depth Mask */
+ PHY_M_PC_ASS_CRS_TX = 1<<11, /* Assert CRS on Transmit */
+ PHY_M_PC_FL_GOOD = 1<<10, /* Force Link Good */
+ PHY_M_PC_EN_DET_MSK = 3<<8,/* Bit 9.. 8: Energy Detect Mask */
+ PHY_M_PC_ENA_EXT_D = 1<<7, /* Enable Ext. Distance (10BT) */
+ PHY_M_PC_MDIX_MSK = 3<<5,/* Bit 6.. 5: MDI/MDIX Config. Mask */
+ PHY_M_PC_DIS_125CLK = 1<<4, /* Disable 125 CLK */
+ PHY_M_PC_MAC_POW_UP = 1<<3, /* MAC Power up */
+ PHY_M_PC_SQE_T_ENA = 1<<2, /* SQE Test Enabled */
+ PHY_M_PC_POL_R_DIS = 1<<1, /* Polarity Reversal Disabled */
+ PHY_M_PC_DIS_JABBER = 1<<0, /* Disable Jabber */
+};
+
+enum {
+ PHY_M_PC_EN_DET = 2<<8, /* Energy Detect (Mode 1) */
+ PHY_M_PC_EN_DET_PLUS = 3<<8, /* Energy Detect Plus (Mode 2) */
+};
+
+#define PHY_M_PC_MDI_XMODE(x) (((x)<<5) & PHY_M_PC_MDIX_MSK)
+
+enum {
+ PHY_M_PC_MAN_MDI = 0, /* 00 = Manual MDI configuration */
+ PHY_M_PC_MAN_MDIX = 1, /* 01 = Manual MDIX configuration */
+ PHY_M_PC_ENA_AUTO = 3, /* 11 = Enable Automatic Crossover */
+};
+
+/* for 10/100 Fast Ethernet PHY (88E3082 only) */
+enum {
+ PHY_M_PC_ENA_DTE_DT = 1<<15, /* Enable Data Terminal Equ. (DTE) Detect */
+ PHY_M_PC_ENA_ENE_DT = 1<<14, /* Enable Energy Detect (sense & pulse) */
+ PHY_M_PC_DIS_NLP_CK = 1<<13, /* Disable Normal Link Puls (NLP) Check */
+ PHY_M_PC_ENA_LIP_NP = 1<<12, /* Enable Link Partner Next Page Reg. */
+ PHY_M_PC_DIS_NLP_GN = 1<<11, /* Disable Normal Link Puls Generation */
+
+ PHY_M_PC_DIS_SCRAMB = 1<<9, /* Disable Scrambler */
+ PHY_M_PC_DIS_FEFI = 1<<8, /* Disable Far End Fault Indic. (FEFI) */
+
+ PHY_M_PC_SH_TP_SEL = 1<<6, /* Shielded Twisted Pair Select */
+ PHY_M_PC_RX_FD_MSK = 3<<2,/* Bit 3.. 2: Rx FIFO Depth Mask */
+};
+
+/***** PHY_MARV_PHY_STAT 16 bit r/o PHY Specific Status Reg *****/
+enum {
+ PHY_M_PS_SPEED_MSK = 3<<14, /* Bit 15..14: Speed Mask */
+ PHY_M_PS_SPEED_1000 = 1<<15, /* 10 = 1000 Mbps */
+ PHY_M_PS_SPEED_100 = 1<<14, /* 01 = 100 Mbps */
+ PHY_M_PS_SPEED_10 = 0, /* 00 = 10 Mbps */
+ PHY_M_PS_FULL_DUP = 1<<13, /* Full Duplex */
+ PHY_M_PS_PAGE_REC = 1<<12, /* Page Received */
+ PHY_M_PS_SPDUP_RES = 1<<11, /* Speed & Duplex Resolved */
+ PHY_M_PS_LINK_UP = 1<<10, /* Link Up */
+ PHY_M_PS_CABLE_MSK = 7<<7, /* Bit 9.. 7: Cable Length Mask */
+ PHY_M_PS_MDI_X_STAT = 1<<6, /* MDI Crossover Stat (1=MDIX) */
+ PHY_M_PS_DOWNS_STAT = 1<<5, /* Downshift Status (1=downsh.) */
+ PHY_M_PS_ENDET_STAT = 1<<4, /* Energy Detect Status (1=act) */
+ PHY_M_PS_TX_P_EN = 1<<3, /* Tx Pause Enabled */
+ PHY_M_PS_RX_P_EN = 1<<2, /* Rx Pause Enabled */
+ PHY_M_PS_POL_REV = 1<<1, /* Polarity Reversed */
+ PHY_M_PS_JABBER = 1<<0, /* Jabber */
+};
+
+#define PHY_M_PS_PAUSE_MSK (PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN)
+
+/* for 10/100 Fast Ethernet PHY (88E3082 only) */
+enum {
+ PHY_M_PS_DTE_DETECT = 1<<15, /* Data Terminal Equipment (DTE) Detected */
+ PHY_M_PS_RES_SPEED = 1<<14, /* Resolved Speed (1=100 Mbps, 0=10 Mbps */
+};
+
+enum {
+ PHY_M_IS_AN_ERROR = 1<<15, /* Auto-Negotiation Error */
+ PHY_M_IS_LSP_CHANGE = 1<<14, /* Link Speed Changed */
+ PHY_M_IS_DUP_CHANGE = 1<<13, /* Duplex Mode Changed */
+ PHY_M_IS_AN_PR = 1<<12, /* Page Received */
+ PHY_M_IS_AN_COMPL = 1<<11, /* Auto-Negotiation Completed */
+ PHY_M_IS_LST_CHANGE = 1<<10, /* Link Status Changed */
+ PHY_M_IS_SYMB_ERROR = 1<<9, /* Symbol Error */
+ PHY_M_IS_FALSE_CARR = 1<<8, /* False Carrier */
+ PHY_M_IS_FIFO_ERROR = 1<<7, /* FIFO Overflow/Underrun Error */
+ PHY_M_IS_MDI_CHANGE = 1<<6, /* MDI Crossover Changed */
+ PHY_M_IS_DOWNSH_DET = 1<<5, /* Downshift Detected */
+ PHY_M_IS_END_CHANGE = 1<<4, /* Energy Detect Changed */
+
+ PHY_M_IS_DTE_CHANGE = 1<<2, /* DTE Power Det. Status Changed */
+ PHY_M_IS_POL_CHANGE = 1<<1, /* Polarity Changed */
+ PHY_M_IS_JABBER = 1<<0, /* Jabber */
+};
+
+#define PHY_M_DEF_MSK ( PHY_M_IS_AN_ERROR | PHY_M_IS_LSP_CHANGE | \
+ PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR)
+
+/***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/
+enum {
+ PHY_M_EC_ENA_BC_EXT = 1<<15, /* Enable Block Carr. Ext. (88E1111 only) */
+ PHY_M_EC_ENA_LIN_LB = 1<<14, /* Enable Line Loopback (88E1111 only) */
+
+ PHY_M_EC_DIS_LINK_P = 1<<12, /* Disable Link Pulses (88E1111 only) */
+ PHY_M_EC_M_DSC_MSK = 3<<10, /* Bit 11..10: Master Downshift Counter */
+ /* (88E1011 only) */
+ PHY_M_EC_S_DSC_MSK = 3<<8,/* Bit 9.. 8: Slave Downshift Counter */
+ /* (88E1011 only) */
+ PHY_M_EC_M_DSC_MSK2 = 7<<9,/* Bit 11.. 9: Master Downshift Counter */
+ /* (88E1111 only) */
+ PHY_M_EC_DOWN_S_ENA = 1<<8, /* Downshift Enable (88E1111 only) */
+ /* !!! Errata in spec. (1 = disable) */
+ PHY_M_EC_RX_TIM_CT = 1<<7, /* RGMII Rx Timing Control*/
+ PHY_M_EC_MAC_S_MSK = 7<<4,/* Bit 6.. 4: Def. MAC interface speed */
+ PHY_M_EC_FIB_AN_ENA = 1<<3, /* Fiber Auto-Neg. Enable (88E1011S only) */
+ PHY_M_EC_DTE_D_ENA = 1<<2, /* DTE Detect Enable (88E1111 only) */
+ PHY_M_EC_TX_TIM_CT = 1<<1, /* RGMII Tx Timing Control */
+ PHY_M_EC_TRANS_DIS = 1<<0, /* Transmitter Disable (88E1111 only) */};
+
+#define PHY_M_EC_M_DSC(x) ((x)<<10) /* 00=1x; 01=2x; 10=3x; 11=4x */
+#define PHY_M_EC_S_DSC(x) ((x)<<8) /* 00=dis; 01=1x; 10=2x; 11=3x */
+#define PHY_M_EC_MAC_S(x) ((x)<<4) /* 01X=0; 110=2.5; 111=25 (MHz) */
+
+#define PHY_M_EC_M_DSC_2(x) ((x)<<9) /* 000=1x; 001=2x; 010=3x; 011=4x */
+ /* 100=5x; 101=6x; 110=7x; 111=8x */
+enum {
+ MAC_TX_CLK_0_MHZ = 2,
+ MAC_TX_CLK_2_5_MHZ = 6,
+ MAC_TX_CLK_25_MHZ = 7,
+};
+
+/***** PHY_MARV_LED_CTRL 16 bit r/w LED Control Reg *****/
+enum {
+ PHY_M_LEDC_DIS_LED = 1<<15, /* Disable LED */
+ PHY_M_LEDC_PULS_MSK = 7<<12,/* Bit 14..12: Pulse Stretch Mask */
+ PHY_M_LEDC_F_INT = 1<<11, /* Force Interrupt */
+ PHY_M_LEDC_BL_R_MSK = 7<<8,/* Bit 10.. 8: Blink Rate Mask */
+ PHY_M_LEDC_DP_C_LSB = 1<<7, /* Duplex Control (LSB, 88E1111 only) */
+ PHY_M_LEDC_TX_C_LSB = 1<<6, /* Tx Control (LSB, 88E1111 only) */
+ PHY_M_LEDC_LK_C_MSK = 7<<3,/* Bit 5.. 3: Link Control Mask */
+ /* (88E1111 only) */
+};
+
+enum {
+ PHY_M_LEDC_LINK_MSK = 3<<3,/* Bit 4.. 3: Link Control Mask */
+ /* (88E1011 only) */
+ PHY_M_LEDC_DP_CTRL = 1<<2, /* Duplex Control */
+ PHY_M_LEDC_DP_C_MSB = 1<<2, /* Duplex Control (MSB, 88E1111 only) */
+ PHY_M_LEDC_RX_CTRL = 1<<1, /* Rx Activity / Link */
+ PHY_M_LEDC_TX_CTRL = 1<<0, /* Tx Activity / Link */
+ PHY_M_LEDC_TX_C_MSB = 1<<0, /* Tx Control (MSB, 88E1111 only) */
+};
+
+#define PHY_M_LED_PULS_DUR(x) ( ((x)<<12) & PHY_M_LEDC_PULS_MSK)
+
+enum {
+ PULS_NO_STR = 0,/* no pulse stretching */
+ PULS_21MS = 1,/* 21 ms to 42 ms */
+ PULS_42MS = 2,/* 42 ms to 84 ms */
+ PULS_84MS = 3,/* 84 ms to 170 ms */
+ PULS_170MS = 4,/* 170 ms to 340 ms */
+ PULS_340MS = 5,/* 340 ms to 670 ms */
+ PULS_670MS = 6,/* 670 ms to 1.3 s */
+ PULS_1300MS = 7,/* 1.3 s to 2.7 s */
+};
+
+#define PHY_M_LED_BLINK_RT(x) ( ((x)<<8) & PHY_M_LEDC_BL_R_MSK)
+
+enum {
+ BLINK_42MS = 0,/* 42 ms */
+ BLINK_84MS = 1,/* 84 ms */
+ BLINK_170MS = 2,/* 170 ms */
+ BLINK_340MS = 3,/* 340 ms */
+ BLINK_670MS = 4,/* 670 ms */
+};
+
+/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/
+#define PHY_M_LED_MO_SGMII(x) ((x)<<14) /* Bit 15..14: SGMII AN Timer */
+ /* Bit 13..12: reserved */
+#define PHY_M_LED_MO_DUP(x) ((x)<<10) /* Bit 11..10: Duplex */
+#define PHY_M_LED_MO_10(x) ((x)<<8) /* Bit 9.. 8: Link 10 */
+#define PHY_M_LED_MO_100(x) ((x)<<6) /* Bit 7.. 6: Link 100 */
+#define PHY_M_LED_MO_1000(x) ((x)<<4) /* Bit 5.. 4: Link 1000 */
+#define PHY_M_LED_MO_RX(x) ((x)<<2) /* Bit 3.. 2: Rx */
+#define PHY_M_LED_MO_TX(x) ((x)<<0) /* Bit 1.. 0: Tx */
+
+enum {
+ MO_LED_NORM = 0,
+ MO_LED_BLINK = 1,
+ MO_LED_OFF = 2,
+ MO_LED_ON = 3,
+};
+
+/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/
+enum {
+ PHY_M_EC2_FI_IMPED = 1<<6, /* Fiber Input Impedance */
+ PHY_M_EC2_FO_IMPED = 1<<5, /* Fiber Output Impedance */
+ PHY_M_EC2_FO_M_CLK = 1<<4, /* Fiber Mode Clock Enable */
+ PHY_M_EC2_FO_BOOST = 1<<3, /* Fiber Output Boost */
+ PHY_M_EC2_FO_AM_MSK = 7,/* Bit 2.. 0: Fiber Output Amplitude */
+};
+
+/***** PHY_MARV_EXT_P_STAT 16 bit r/w Ext. PHY Specific Status *****/
+enum {
+ PHY_M_FC_AUTO_SEL = 1<<15, /* Fiber/Copper Auto Sel. Dis. */
+ PHY_M_FC_AN_REG_ACC = 1<<14, /* Fiber/Copper AN Reg. Access */
+ PHY_M_FC_RESOLUTION = 1<<13, /* Fiber/Copper Resolution */
+ PHY_M_SER_IF_AN_BP = 1<<12, /* Ser. IF AN Bypass Enable */
+ PHY_M_SER_IF_BP_ST = 1<<11, /* Ser. IF AN Bypass Status */
+ PHY_M_IRQ_POLARITY = 1<<10, /* IRQ polarity */
+ PHY_M_DIS_AUT_MED = 1<<9, /* Disable Aut. Medium Reg. Selection */
+ /* (88E1111 only) */
+ /* Bit 9.. 4: reserved (88E1011 only) */
+ PHY_M_UNDOC1 = 1<<7, /* undocumented bit !! */
+ PHY_M_DTE_POW_STAT = 1<<4, /* DTE Power Status (88E1111 only) */
+ PHY_M_MODE_MASK = 0xf, /* Bit 3.. 0: copy of HWCFG MODE[3:0] */
+};
+
+/***** PHY_MARV_CABLE_DIAG 16 bit r/o Cable Diagnostic Reg *****/
+enum {
+ PHY_M_CABD_ENA_TEST = 1<<15, /* Enable Test (Page 0) */
+ PHY_M_CABD_DIS_WAIT = 1<<15, /* Disable Waiting Period (Page 1) */
+ /* (88E1111 only) */
+ PHY_M_CABD_STAT_MSK = 3<<13, /* Bit 14..13: Status Mask */
+ PHY_M_CABD_AMPL_MSK = 0x1f<<8,/* Bit 12.. 8: Amplitude Mask */
+ /* (88E1111 only) */
+ PHY_M_CABD_DIST_MSK = 0xff, /* Bit 7.. 0: Distance Mask */
+};
+
+/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */
+enum {
+ CABD_STAT_NORMAL= 0,
+ CABD_STAT_SHORT = 1,
+ CABD_STAT_OPEN = 2,
+ CABD_STAT_FAIL = 3,
+};
+
+/* for 10/100 Fast Ethernet PHY (88E3082 only) */
+/***** PHY_MARV_FE_LED_PAR 16 bit r/w LED Parallel Select Reg. *****/
+ /* Bit 15..12: reserved (used internally) */
+enum {
+ PHY_M_FELP_LED2_MSK = 0xf<<8, /* Bit 11.. 8: LED2 Mask (LINK) */
+ PHY_M_FELP_LED1_MSK = 0xf<<4, /* Bit 7.. 4: LED1 Mask (ACT) */
+ PHY_M_FELP_LED0_MSK = 0xf, /* Bit 3.. 0: LED0 Mask (SPEED) */
+};
+
+#define PHY_M_FELP_LED2_CTRL(x) ( ((x)<<8) & PHY_M_FELP_LED2_MSK)
+#define PHY_M_FELP_LED1_CTRL(x) ( ((x)<<4) & PHY_M_FELP_LED1_MSK)
+#define PHY_M_FELP_LED0_CTRL(x) ( ((x)<<0) & PHY_M_FELP_LED0_MSK)
+
+enum {
+ LED_PAR_CTRL_COLX = 0x00,
+ LED_PAR_CTRL_ERROR = 0x01,
+ LED_PAR_CTRL_DUPLEX = 0x02,
+ LED_PAR_CTRL_DP_COL = 0x03,
+ LED_PAR_CTRL_SPEED = 0x04,
+ LED_PAR_CTRL_LINK = 0x05,
+ LED_PAR_CTRL_TX = 0x06,
+ LED_PAR_CTRL_RX = 0x07,
+ LED_PAR_CTRL_ACT = 0x08,
+ LED_PAR_CTRL_LNK_RX = 0x09,
+ LED_PAR_CTRL_LNK_AC = 0x0a,
+ LED_PAR_CTRL_ACT_BL = 0x0b,
+ LED_PAR_CTRL_TX_BL = 0x0c,
+ LED_PAR_CTRL_RX_BL = 0x0d,
+ LED_PAR_CTRL_COL_BL = 0x0e,
+ LED_PAR_CTRL_INACT = 0x0f
+};
+
+/*****,PHY_MARV_FE_SPEC_2 16 bit r/w Specific Control Reg. 2 *****/
+enum {
+ PHY_M_FESC_DIS_WAIT = 1<<2, /* Disable TDR Waiting Period */
+ PHY_M_FESC_ENA_MCLK = 1<<1, /* Enable MAC Rx Clock in sleep mode */
+ PHY_M_FESC_SEL_CL_A = 1<<0, /* Select Class A driver (100B-TX) */
+};
+
+/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */
+/***** PHY_MARV_PHY_CTRL (page 2) 16 bit r/w MAC Specific Ctrl *****/
+enum {
+ PHY_M_MAC_MD_MSK = 7<<7, /* Bit 9.. 7: Mode Select Mask */
+ PHY_M_MAC_MD_AUTO = 3,/* Auto Copper/1000Base-X */
+ PHY_M_MAC_MD_COPPER = 5,/* Copper only */
+ PHY_M_MAC_MD_1000BX = 7,/* 1000Base-X only */
+};
+#define PHY_M_MAC_MODE_SEL(x) ( ((x)<<7) & PHY_M_MAC_MD_MSK)
+
+/***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/
+enum {
+ PHY_M_LEDC_LOS_MSK = 0xf<<12,/* Bit 15..12: LOS LED Ctrl. Mask */
+ PHY_M_LEDC_INIT_MSK = 0xf<<8, /* Bit 11.. 8: INIT LED Ctrl. Mask */
+ PHY_M_LEDC_STA1_MSK = 0xf<<4,/* Bit 7.. 4: STAT1 LED Ctrl. Mask */
+ PHY_M_LEDC_STA0_MSK = 0xf, /* Bit 3.. 0: STAT0 LED Ctrl. Mask */
+};
+
+#define PHY_M_LEDC_LOS_CTRL(x) ( ((x)<<12) & PHY_M_LEDC_LOS_MSK)
+#define PHY_M_LEDC_INIT_CTRL(x) ( ((x)<<8) & PHY_M_LEDC_INIT_MSK)
+#define PHY_M_LEDC_STA1_CTRL(x) ( ((x)<<4) & PHY_M_LEDC_STA1_MSK)
+#define PHY_M_LEDC_STA0_CTRL(x) ( ((x)<<0) & PHY_M_LEDC_STA0_MSK)
+
+/* GMAC registers */
+/* Port Registers */
+enum {
+ GM_GP_STAT = 0x0000, /* 16 bit r/o General Purpose Status */
+ GM_GP_CTRL = 0x0004, /* 16 bit r/w General Purpose Control */
+ GM_TX_CTRL = 0x0008, /* 16 bit r/w Transmit Control Reg. */
+ GM_RX_CTRL = 0x000c, /* 16 bit r/w Receive Control Reg. */
+ GM_TX_FLOW_CTRL = 0x0010, /* 16 bit r/w Transmit Flow-Control */
+ GM_TX_PARAM = 0x0014, /* 16 bit r/w Transmit Parameter Reg. */
+ GM_SERIAL_MODE = 0x0018, /* 16 bit r/w Serial Mode Register */
+/* Source Address Registers */
+ GM_SRC_ADDR_1L = 0x001c, /* 16 bit r/w Source Address 1 (low) */
+ GM_SRC_ADDR_1M = 0x0020, /* 16 bit r/w Source Address 1 (middle) */
+ GM_SRC_ADDR_1H = 0x0024, /* 16 bit r/w Source Address 1 (high) */
+ GM_SRC_ADDR_2L = 0x0028, /* 16 bit r/w Source Address 2 (low) */
+ GM_SRC_ADDR_2M = 0x002c, /* 16 bit r/w Source Address 2 (middle) */
+ GM_SRC_ADDR_2H = 0x0030, /* 16 bit r/w Source Address 2 (high) */
+
+/* Multicast Address Hash Registers */
+ GM_MC_ADDR_H1 = 0x0034, /* 16 bit r/w Multicast Address Hash 1 */
+ GM_MC_ADDR_H2 = 0x0038, /* 16 bit r/w Multicast Address Hash 2 */
+ GM_MC_ADDR_H3 = 0x003c, /* 16 bit r/w Multicast Address Hash 3 */
+ GM_MC_ADDR_H4 = 0x0040, /* 16 bit r/w Multicast Address Hash 4 */
+
+/* Interrupt Source Registers */
+ GM_TX_IRQ_SRC = 0x0044, /* 16 bit r/o Tx Overflow IRQ Source */
+ GM_RX_IRQ_SRC = 0x0048, /* 16 bit r/o Rx Overflow IRQ Source */
+ GM_TR_IRQ_SRC = 0x004c, /* 16 bit r/o Tx/Rx Over. IRQ Source */
+
+/* Interrupt Mask Registers */
+ GM_TX_IRQ_MSK = 0x0050, /* 16 bit r/w Tx Overflow IRQ Mask */
+ GM_RX_IRQ_MSK = 0x0054, /* 16 bit r/w Rx Overflow IRQ Mask */
+ GM_TR_IRQ_MSK = 0x0058, /* 16 bit r/w Tx/Rx Over. IRQ Mask */
+
+/* Serial Management Interface (SMI) Registers */
+ GM_SMI_CTRL = 0x0080, /* 16 bit r/w SMI Control Register */
+ GM_SMI_DATA = 0x0084, /* 16 bit r/w SMI Data Register */
+ GM_PHY_ADDR = 0x0088, /* 16 bit r/w GPHY Address Register */
+};
+
+/* MIB Counters */
+#define GM_MIB_CNT_BASE 0x0100 /* Base Address of MIB Counters */
+#define GM_MIB_CNT_SIZE 44 /* Number of MIB Counters */
+
+/*
+ * MIB Counters base address definitions (low word) -
+ * use offset 4 for access to high word (32 bit r/o)
+ */
+enum {
+ GM_RXF_UC_OK = GM_MIB_CNT_BASE + 0, /* Unicast Frames Received OK */
+ GM_RXF_BC_OK = GM_MIB_CNT_BASE + 8, /* Broadcast Frames Received OK */
+ GM_RXF_MPAUSE = GM_MIB_CNT_BASE + 16, /* Pause MAC Ctrl Frames Received */
+ GM_RXF_MC_OK = GM_MIB_CNT_BASE + 24, /* Multicast Frames Received OK */
+ GM_RXF_FCS_ERR = GM_MIB_CNT_BASE + 32, /* Rx Frame Check Seq. Error */
+ /* GM_MIB_CNT_BASE + 40: reserved */
+ GM_RXO_OK_LO = GM_MIB_CNT_BASE + 48, /* Octets Received OK Low */
+ GM_RXO_OK_HI = GM_MIB_CNT_BASE + 56, /* Octets Received OK High */
+ GM_RXO_ERR_LO = GM_MIB_CNT_BASE + 64, /* Octets Received Invalid Low */
+ GM_RXO_ERR_HI = GM_MIB_CNT_BASE + 72, /* Octets Received Invalid High */
+ GM_RXF_SHT = GM_MIB_CNT_BASE + 80, /* Frames <64 Byte Received OK */
+ GM_RXE_FRAG = GM_MIB_CNT_BASE + 88, /* Frames <64 Byte Received with FCS Err */
+ GM_RXF_64B = GM_MIB_CNT_BASE + 96, /* 64 Byte Rx Frame */
+ GM_RXF_127B = GM_MIB_CNT_BASE + 104, /* 65-127 Byte Rx Frame */
+ GM_RXF_255B = GM_MIB_CNT_BASE + 112, /* 128-255 Byte Rx Frame */
+ GM_RXF_511B = GM_MIB_CNT_BASE + 120, /* 256-511 Byte Rx Frame */
+ GM_RXF_1023B = GM_MIB_CNT_BASE + 128, /* 512-1023 Byte Rx Frame */
+ GM_RXF_1518B = GM_MIB_CNT_BASE + 136, /* 1024-1518 Byte Rx Frame */
+ GM_RXF_MAX_SZ = GM_MIB_CNT_BASE + 144, /* 1519-MaxSize Byte Rx Frame */
+ GM_RXF_LNG_ERR = GM_MIB_CNT_BASE + 152, /* Rx Frame too Long Error */
+ GM_RXF_JAB_PKT = GM_MIB_CNT_BASE + 160, /* Rx Jabber Packet Frame */
+ /* GM_MIB_CNT_BASE + 168: reserved */
+ GM_RXE_FIFO_OV = GM_MIB_CNT_BASE + 176, /* Rx FIFO overflow Event */
+ /* GM_MIB_CNT_BASE + 184: reserved */
+ GM_TXF_UC_OK = GM_MIB_CNT_BASE + 192, /* Unicast Frames Xmitted OK */
+ GM_TXF_BC_OK = GM_MIB_CNT_BASE + 200, /* Broadcast Frames Xmitted OK */
+ GM_TXF_MPAUSE = GM_MIB_CNT_BASE + 208, /* Pause MAC Ctrl Frames Xmitted */
+ GM_TXF_MC_OK = GM_MIB_CNT_BASE + 216, /* Multicast Frames Xmitted OK */
+ GM_TXO_OK_LO = GM_MIB_CNT_BASE + 224, /* Octets Transmitted OK Low */
+ GM_TXO_OK_HI = GM_MIB_CNT_BASE + 232, /* Octets Transmitted OK High */
+ GM_TXF_64B = GM_MIB_CNT_BASE + 240, /* 64 Byte Tx Frame */
+ GM_TXF_127B = GM_MIB_CNT_BASE + 248, /* 65-127 Byte Tx Frame */
+ GM_TXF_255B = GM_MIB_CNT_BASE + 256, /* 128-255 Byte Tx Frame */
+ GM_TXF_511B = GM_MIB_CNT_BASE + 264, /* 256-511 Byte Tx Frame */
+ GM_TXF_1023B = GM_MIB_CNT_BASE + 272, /* 512-1023 Byte Tx Frame */
+ GM_TXF_1518B = GM_MIB_CNT_BASE + 280, /* 1024-1518 Byte Tx Frame */
+ GM_TXF_MAX_SZ = GM_MIB_CNT_BASE + 288, /* 1519-MaxSize Byte Tx Frame */
+
+ GM_TXF_COL = GM_MIB_CNT_BASE + 304, /* Tx Collision */
+ GM_TXF_LAT_COL = GM_MIB_CNT_BASE + 312, /* Tx Late Collision */
+ GM_TXF_ABO_COL = GM_MIB_CNT_BASE + 320, /* Tx aborted due to Exces. Col. */
+ GM_TXF_MUL_COL = GM_MIB_CNT_BASE + 328, /* Tx Multiple Collision */
+ GM_TXF_SNG_COL = GM_MIB_CNT_BASE + 336, /* Tx Single Collision */
+ GM_TXE_FIFO_UR = GM_MIB_CNT_BASE + 344, /* Tx FIFO Underrun Event */
+};
+
+/* GMAC Bit Definitions */
+/* GM_GP_STAT 16 bit r/o General Purpose Status Register */
+enum {
+ GM_GPSR_SPEED = 1<<15, /* Bit 15: Port Speed (1 = 100 Mbps) */
+ GM_GPSR_DUPLEX = 1<<14, /* Bit 14: Duplex Mode (1 = Full) */
+ GM_GPSR_FC_TX_DIS = 1<<13, /* Bit 13: Tx Flow-Control Mode Disabled */
+ GM_GPSR_LINK_UP = 1<<12, /* Bit 12: Link Up Status */
+ GM_GPSR_PAUSE = 1<<11, /* Bit 11: Pause State */
+ GM_GPSR_TX_ACTIVE = 1<<10, /* Bit 10: Tx in Progress */
+ GM_GPSR_EXC_COL = 1<<9, /* Bit 9: Excessive Collisions Occured */
+ GM_GPSR_LAT_COL = 1<<8, /* Bit 8: Late Collisions Occured */
+
+ GM_GPSR_PHY_ST_CH = 1<<5, /* Bit 5: PHY Status Change */
+ GM_GPSR_GIG_SPEED = 1<<4, /* Bit 4: Gigabit Speed (1 = 1000 Mbps) */
+ GM_GPSR_PART_MODE = 1<<3, /* Bit 3: Partition mode */
+ GM_GPSR_FC_RX_DIS = 1<<2, /* Bit 2: Rx Flow-Control Mode Disabled */
+ GM_GPSR_PROM_EN = 1<<1, /* Bit 1: Promiscuous Mode Enabled */
+};
+
+/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */
+enum {
+ GM_GPCR_PROM_ENA = 1<<14, /* Bit 14: Enable Promiscuous Mode */
+ GM_GPCR_FC_TX_DIS = 1<<13, /* Bit 13: Disable Tx Flow-Control Mode */
+ GM_GPCR_TX_ENA = 1<<12, /* Bit 12: Enable Transmit */
+ GM_GPCR_RX_ENA = 1<<11, /* Bit 11: Enable Receive */
+ GM_GPCR_BURST_ENA = 1<<10, /* Bit 10: Enable Burst Mode */
+ GM_GPCR_LOOP_ENA = 1<<9, /* Bit 9: Enable MAC Loopback Mode */
+ GM_GPCR_PART_ENA = 1<<8, /* Bit 8: Enable Partition Mode */
+ GM_GPCR_GIGS_ENA = 1<<7, /* Bit 7: Gigabit Speed (1000 Mbps) */
+ GM_GPCR_FL_PASS = 1<<6, /* Bit 6: Force Link Pass */
+ GM_GPCR_DUP_FULL = 1<<5, /* Bit 5: Full Duplex Mode */
+ GM_GPCR_FC_RX_DIS = 1<<4, /* Bit 4: Disable Rx Flow-Control Mode */
+ GM_GPCR_SPEED_100 = 1<<3, /* Bit 3: Port Speed 100 Mbps */
+ GM_GPCR_AU_DUP_DIS = 1<<2, /* Bit 2: Disable Auto-Update Duplex */
+ GM_GPCR_AU_FCT_DIS = 1<<1, /* Bit 1: Disable Auto-Update Flow-C. */
+ GM_GPCR_AU_SPD_DIS = 1<<0, /* Bit 0: Disable Auto-Update Speed */
+};
+
+#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100)
+#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS|GM_GPCR_AU_SPD_DIS)
+
+/* GM_TX_CTRL 16 bit r/w Transmit Control Register */
+enum {
+ GM_TXCR_FORCE_JAM = 1<<15, /* Bit 15: Force Jam / Flow-Control */
+ GM_TXCR_CRC_DIS = 1<<14, /* Bit 14: Disable insertion of CRC */
+ GM_TXCR_PAD_DIS = 1<<13, /* Bit 13: Disable padding of packets */
+ GM_TXCR_COL_THR_MSK = 1<<10, /* Bit 12..10: Collision Threshold */
+};
+
+#define TX_COL_THR(x) (((x)<<10) & GM_TXCR_COL_THR_MSK)
+#define TX_COL_DEF 0x04
+
+/* GM_RX_CTRL 16 bit r/w Receive Control Register */
+enum {
+ GM_RXCR_UCF_ENA = 1<<15, /* Bit 15: Enable Unicast filtering */
+ GM_RXCR_MCF_ENA = 1<<14, /* Bit 14: Enable Multicast filtering */
+ GM_RXCR_CRC_DIS = 1<<13, /* Bit 13: Remove 4-byte CRC */
+ GM_RXCR_PASS_FC = 1<<12, /* Bit 12: Pass FC packets to FIFO */
+};
+
+/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */
+enum {
+ GM_TXPA_JAMLEN_MSK = 0x03<<14, /* Bit 15..14: Jam Length */
+ GM_TXPA_JAMIPG_MSK = 0x1f<<9, /* Bit 13..9: Jam IPG */
+ GM_TXPA_JAMDAT_MSK = 0x1f<<4, /* Bit 8..4: IPG Jam to Data */
+
+ TX_JAM_LEN_DEF = 0x03,
+ TX_JAM_IPG_DEF = 0x0b,
+ TX_IPG_JAM_DEF = 0x1c,
+};
+
+#define TX_JAM_LEN_VAL(x) (((x)<<14) & GM_TXPA_JAMLEN_MSK)
+#define TX_JAM_IPG_VAL(x) (((x)<<9) & GM_TXPA_JAMIPG_MSK)
+#define TX_IPG_JAM_DATA(x) (((x)<<4) & GM_TXPA_JAMDAT_MSK)
+
+
+/* GM_SERIAL_MODE 16 bit r/w Serial Mode Register */
+enum {
+ GM_SMOD_DATABL_MSK = 0x1f<<11, /* Bit 15..11: Data Blinder (r/o) */
+ GM_SMOD_LIMIT_4 = 1<<10, /* Bit 10: 4 consecutive Tx trials */
+ GM_SMOD_VLAN_ENA = 1<<9, /* Bit 9: Enable VLAN (Max. Frame Len) */
+ GM_SMOD_JUMBO_ENA = 1<<8, /* Bit 8: Enable Jumbo (Max. Frame Len) */
+ GM_SMOD_IPG_MSK = 0x1f /* Bit 4..0: Inter-Packet Gap (IPG) */
+};
+
+#define DATA_BLIND_VAL(x) (((x)<<11) & GM_SMOD_DATABL_MSK)
+#define DATA_BLIND_DEF 0x04
+
+#define IPG_DATA_VAL(x) (x & GM_SMOD_IPG_MSK)
+#define IPG_DATA_DEF 0x1e
+
+/* GM_SMI_CTRL 16 bit r/w SMI Control Register */
+enum {
+ GM_SMI_CT_PHY_A_MSK = 0x1f<<11,/* Bit 15..11: PHY Device Address */
+ GM_SMI_CT_REG_A_MSK = 0x1f<<6,/* Bit 10.. 6: PHY Register Address */
+ GM_SMI_CT_OP_RD = 1<<5, /* Bit 5: OpCode Read (0=Write)*/
+ GM_SMI_CT_RD_VAL = 1<<4, /* Bit 4: Read Valid (Read completed) */
+ GM_SMI_CT_BUSY = 1<<3, /* Bit 3: Busy (Operation in progress) */
+};
+
+#define GM_SMI_CT_PHY_AD(x) (((x)<<11) & GM_SMI_CT_PHY_A_MSK)
+#define GM_SMI_CT_REG_AD(x) (((x)<<6) & GM_SMI_CT_REG_A_MSK)
+
+/* GM_PHY_ADDR 16 bit r/w GPHY Address Register */
+enum {
+ GM_PAR_MIB_CLR = 1<<5, /* Bit 5: Set MIB Clear Counter Mode */
+ GM_PAR_MIB_TST = 1<<4, /* Bit 4: MIB Load Counter (Test Mode) */
+};
+
+/* Receive Frame Status Encoding */
+enum {
+ GMR_FS_LEN = 0xffff<<16, /* Bit 31..16: Rx Frame Length */
+ GMR_FS_VLAN = 1<<13, /* Bit 13: VLAN Packet */
+ GMR_FS_JABBER = 1<<12, /* Bit 12: Jabber Packet */
+ GMR_FS_UN_SIZE = 1<<11, /* Bit 11: Undersize Packet */
+ GMR_FS_MC = 1<<10, /* Bit 10: Multicast Packet */
+ GMR_FS_BC = 1<<9, /* Bit 9: Broadcast Packet */
+ GMR_FS_RX_OK = 1<<8, /* Bit 8: Receive OK (Good Packet) */
+ GMR_FS_GOOD_FC = 1<<7, /* Bit 7: Good Flow-Control Packet */
+ GMR_FS_BAD_FC = 1<<6, /* Bit 6: Bad Flow-Control Packet */
+ GMR_FS_MII_ERR = 1<<5, /* Bit 5: MII Error */
+ GMR_FS_LONG_ERR = 1<<4, /* Bit 4: Too Long Packet */
+ GMR_FS_FRAGMENT = 1<<3, /* Bit 3: Fragment */
+
+ GMR_FS_CRC_ERR = 1<<1, /* Bit 1: CRC Error */
+ GMR_FS_RX_FF_OV = 1<<0, /* Bit 0: Rx FIFO Overflow */
+
+/*
+ * GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR)
+ */
+ GMR_FS_ANY_ERR = GMR_FS_CRC_ERR | GMR_FS_LONG_ERR |
+ GMR_FS_MII_ERR | GMR_FS_BAD_FC | GMR_FS_GOOD_FC |
+ GMR_FS_JABBER,
+/* Rx GMAC FIFO Flush Mask (default) */
+ RX_FF_FL_DEF_MSK = GMR_FS_CRC_ERR | GMR_FS_RX_FF_OV |GMR_FS_MII_ERR |
+ GMR_FS_BAD_FC | GMR_FS_GOOD_FC | GMR_FS_UN_SIZE |
+ GMR_FS_JABBER,
+};
+
+/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */
+enum {
+ GMF_WP_TST_ON = 1<<14, /* Write Pointer Test On */
+ GMF_WP_TST_OFF = 1<<13, /* Write Pointer Test Off */
+ GMF_WP_STEP = 1<<12, /* Write Pointer Step/Increment */
+
+ GMF_RP_TST_ON = 1<<10, /* Read Pointer Test On */
+ GMF_RP_TST_OFF = 1<<9, /* Read Pointer Test Off */
+ GMF_RP_STEP = 1<<8, /* Read Pointer Step/Increment */
+ GMF_RX_F_FL_ON = 1<<7, /* Rx FIFO Flush Mode On */
+ GMF_RX_F_FL_OFF = 1<<6, /* Rx FIFO Flush Mode Off */
+ GMF_CLI_RX_FO = 1<<5, /* Clear IRQ Rx FIFO Overrun */
+ GMF_CLI_RX_FC = 1<<4, /* Clear IRQ Rx Frame Complete */
+ GMF_OPER_ON = 1<<3, /* Operational Mode On */
+ GMF_OPER_OFF = 1<<2, /* Operational Mode Off */
+ GMF_RST_CLR = 1<<1, /* Clear GMAC FIFO Reset */
+ GMF_RST_SET = 1<<0, /* Set GMAC FIFO Reset */
+
+ RX_GMF_FL_THR_DEF = 0xa, /* flush threshold (default) */
+};
+
+
+/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */
+enum {
+ GMF_WSP_TST_ON = 1<<18,/* Write Shadow Pointer Test On */
+ GMF_WSP_TST_OFF = 1<<17,/* Write Shadow Pointer Test Off */
+ GMF_WSP_STEP = 1<<16,/* Write Shadow Pointer Step/Increment */
+
+ GMF_CLI_TX_FU = 1<<6, /* Clear IRQ Tx FIFO Underrun */
+ GMF_CLI_TX_FC = 1<<5, /* Clear IRQ Tx Frame Complete */
+ GMF_CLI_TX_PE = 1<<4, /* Clear IRQ Tx Parity Error */
+};
+
+/* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */
+enum {
+ GMT_ST_START = 1<<2, /* Start Time Stamp Timer */
+ GMT_ST_STOP = 1<<1, /* Stop Time Stamp Timer */
+ GMT_ST_CLR_IRQ = 1<<0, /* Clear Time Stamp Timer IRQ */
+};
+
+/* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */
+enum {
+ GMC_H_BURST_ON = 1<<7, /* Half Duplex Burst Mode On */
+ GMC_H_BURST_OFF = 1<<6, /* Half Duplex Burst Mode Off */
+ GMC_F_LOOPB_ON = 1<<5, /* FIFO Loopback On */
+ GMC_F_LOOPB_OFF = 1<<4, /* FIFO Loopback Off */
+ GMC_PAUSE_ON = 1<<3, /* Pause On */
+ GMC_PAUSE_OFF = 1<<2, /* Pause Off */
+ GMC_RST_CLR = 1<<1, /* Clear GMAC Reset */
+ GMC_RST_SET = 1<<0, /* Set GMAC Reset */
+};
+
+/* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */
+enum {
+ GPC_SEL_BDT = 1<<28, /* Select Bi-Dir. Transfer for MDC/MDIO */
+ GPC_INT_POL_HI = 1<<27, /* IRQ Polarity is Active HIGH */
+ GPC_75_OHM = 1<<26, /* Use 75 Ohm Termination instead of 50 */
+ GPC_DIS_FC = 1<<25, /* Disable Automatic Fiber/Copper Detection */
+ GPC_DIS_SLEEP = 1<<24, /* Disable Energy Detect */
+ GPC_HWCFG_M_3 = 1<<23, /* HWCFG_MODE[3] */
+ GPC_HWCFG_M_2 = 1<<22, /* HWCFG_MODE[2] */
+ GPC_HWCFG_M_1 = 1<<21, /* HWCFG_MODE[1] */
+ GPC_HWCFG_M_0 = 1<<20, /* HWCFG_MODE[0] */
+ GPC_ANEG_0 = 1<<19, /* ANEG[0] */
+ GPC_ENA_XC = 1<<18, /* Enable MDI crossover */
+ GPC_DIS_125 = 1<<17, /* Disable 125 MHz clock */
+ GPC_ANEG_3 = 1<<16, /* ANEG[3] */
+ GPC_ANEG_2 = 1<<15, /* ANEG[2] */
+ GPC_ANEG_1 = 1<<14, /* ANEG[1] */
+ GPC_ENA_PAUSE = 1<<13, /* Enable Pause (SYM_OR_REM) */
+ GPC_PHYADDR_4 = 1<<12, /* Bit 4 of Phy Addr */
+ GPC_PHYADDR_3 = 1<<11, /* Bit 3 of Phy Addr */
+ GPC_PHYADDR_2 = 1<<10, /* Bit 2 of Phy Addr */
+ GPC_PHYADDR_1 = 1<<9, /* Bit 1 of Phy Addr */
+ GPC_PHYADDR_0 = 1<<8, /* Bit 0 of Phy Addr */
+ /* Bits 7..2: reserved */
+ GPC_RST_CLR = 1<<1, /* Clear GPHY Reset */
+ GPC_RST_SET = 1<<0, /* Set GPHY Reset */
+};
+
+#define GPC_HWCFG_GMII_COP (GPC_HWCFG_M_3|GPC_HWCFG_M_2 | GPC_HWCFG_M_1 | GPC_HWCFG_M_0)
+#define GPC_HWCFG_GMII_FIB (GPC_HWCFG_M_2 | GPC_HWCFG_M_1 | GPC_HWCFG_M_0)
+#define GPC_ANEG_ADV_ALL_M (GPC_ANEG_3 | GPC_ANEG_2 | GPC_ANEG_1 | GPC_ANEG_0)
+
+/* forced speed and duplex mode (don't mix with other ANEG bits) */
+#define GPC_FRC10MBIT_HALF 0
+#define GPC_FRC10MBIT_FULL GPC_ANEG_0
+#define GPC_FRC100MBIT_HALF GPC_ANEG_1
+#define GPC_FRC100MBIT_FULL (GPC_ANEG_0 | GPC_ANEG_1)
+
+/* auto-negotiation with limited advertised speeds */
+/* mix only with master/slave settings (for copper) */
+#define GPC_ADV_1000_HALF GPC_ANEG_2
+#define GPC_ADV_1000_FULL GPC_ANEG_3
+#define GPC_ADV_ALL (GPC_ANEG_2 | GPC_ANEG_3)
+
+/* master/slave settings */
+/* only for copper with 1000 Mbps */
+#define GPC_FORCE_MASTER 0
+#define GPC_FORCE_SLAVE GPC_ANEG_0
+#define GPC_PREF_MASTER GPC_ANEG_1
+#define GPC_PREF_SLAVE (GPC_ANEG_1 | GPC_ANEG_0)
+
+/* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */
+/* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */
+enum {
+ GM_IS_TX_CO_OV = 1<<5, /* Transmit Counter Overflow IRQ */
+ GM_IS_RX_CO_OV = 1<<4, /* Receive Counter Overflow IRQ */
+ GM_IS_TX_FF_UR = 1<<3, /* Transmit FIFO Underrun */
+ GM_IS_TX_COMPL = 1<<2, /* Frame Transmission Complete */
+ GM_IS_RX_FF_OR = 1<<1, /* Receive FIFO Overrun */
+ GM_IS_RX_COMPL = 1<<0, /* Frame Reception Complete */
+
+#define GMAC_DEF_MSK (GM_IS_TX_CO_OV | GM_IS_RX_CO_OV | GM_IS_TX_FF_UR)
+
+/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */
+ /* Bits 15.. 2: reserved */
+ GMLC_RST_CLR = 1<<1, /* Clear GMAC Link Reset */
+ GMLC_RST_SET = 1<<0, /* Set GMAC Link Reset */
+
+
+/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */
+ WOL_CTL_LINK_CHG_OCC = 1<<15,
+ WOL_CTL_MAGIC_PKT_OCC = 1<<14,
+ WOL_CTL_PATTERN_OCC = 1<<13,
+ WOL_CTL_CLEAR_RESULT = 1<<12,
+ WOL_CTL_ENA_PME_ON_LINK_CHG = 1<<11,
+ WOL_CTL_DIS_PME_ON_LINK_CHG = 1<<10,
+ WOL_CTL_ENA_PME_ON_MAGIC_PKT = 1<<9,
+ WOL_CTL_DIS_PME_ON_MAGIC_PKT = 1<<8,
+ WOL_CTL_ENA_PME_ON_PATTERN = 1<<7,
+ WOL_CTL_DIS_PME_ON_PATTERN = 1<<6,
+ WOL_CTL_ENA_LINK_CHG_UNIT = 1<<5,
+ WOL_CTL_DIS_LINK_CHG_UNIT = 1<<4,
+ WOL_CTL_ENA_MAGIC_PKT_UNIT = 1<<3,
+ WOL_CTL_DIS_MAGIC_PKT_UNIT = 1<<2,
+ WOL_CTL_ENA_PATTERN_UNIT = 1<<1,
+ WOL_CTL_DIS_PATTERN_UNIT = 1<<0,
+};
+
+#define WOL_CTL_DEFAULT \
+ (WOL_CTL_DIS_PME_ON_LINK_CHG | \
+ WOL_CTL_DIS_PME_ON_PATTERN | \
+ WOL_CTL_DIS_PME_ON_MAGIC_PKT | \
+ WOL_CTL_DIS_LINK_CHG_UNIT | \
+ WOL_CTL_DIS_PATTERN_UNIT | \
+ WOL_CTL_DIS_MAGIC_PKT_UNIT)
+
+/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */
+#define WOL_CTL_PATT_ENA(x) (1 << (x))
+
+
+/* XMAC II registers */
+enum {
+ XM_MMU_CMD = 0x0000, /* 16 bit r/w MMU Command Register */
+ XM_POFF = 0x0008, /* 32 bit r/w Packet Offset Register */
+ XM_BURST = 0x000c, /* 32 bit r/w Burst Register for half duplex*/
+ XM_1L_VLAN_TAG = 0x0010, /* 16 bit r/w One Level VLAN Tag ID */
+ XM_2L_VLAN_TAG = 0x0014, /* 16 bit r/w Two Level VLAN Tag ID */
+ XM_TX_CMD = 0x0020, /* 16 bit r/w Transmit Command Register */
+ XM_TX_RT_LIM = 0x0024, /* 16 bit r/w Transmit Retry Limit Register */
+ XM_TX_STIME = 0x0028, /* 16 bit r/w Transmit Slottime Register */
+ XM_TX_IPG = 0x002c, /* 16 bit r/w Transmit Inter Packet Gap */
+ XM_RX_CMD = 0x0030, /* 16 bit r/w Receive Command Register */
+ XM_PHY_ADDR = 0x0034, /* 16 bit r/w PHY Address Register */
+ XM_PHY_DATA = 0x0038, /* 16 bit r/w PHY Data Register */
+ XM_GP_PORT = 0x0040, /* 32 bit r/w General Purpose Port Register */
+ XM_IMSK = 0x0044, /* 16 bit r/w Interrupt Mask Register */
+ XM_ISRC = 0x0048, /* 16 bit r/o Interrupt Status Register */
+ XM_HW_CFG = 0x004c, /* 16 bit r/w Hardware Config Register */
+ XM_TX_LO_WM = 0x0060, /* 16 bit r/w Tx FIFO Low Water Mark */
+ XM_TX_HI_WM = 0x0062, /* 16 bit r/w Tx FIFO High Water Mark */
+ XM_TX_THR = 0x0064, /* 16 bit r/w Tx Request Threshold */
+ XM_HT_THR = 0x0066, /* 16 bit r/w Host Request Threshold */
+ XM_PAUSE_DA = 0x0068, /* NA reg r/w Pause Destination Address */
+ XM_CTL_PARA = 0x0070, /* 32 bit r/w Control Parameter Register */
+ XM_MAC_OPCODE = 0x0074, /* 16 bit r/w Opcode for MAC control frames */
+ XM_MAC_PTIME = 0x0076, /* 16 bit r/w Pause time for MAC ctrl frames*/
+ XM_TX_STAT = 0x0078, /* 32 bit r/o Tx Status LIFO Register */
+
+ XM_EXM_START = 0x0080, /* r/w Start Address of the EXM Regs */
+#define XM_EXM(reg) (XM_EXM_START + ((reg) << 3))
+};
+
+enum {
+ XM_SRC_CHK = 0x0100, /* NA reg r/w Source Check Address Register */
+ XM_SA = 0x0108, /* NA reg r/w Station Address Register */
+ XM_HSM = 0x0110, /* 64 bit r/w Hash Match Address Registers */
+ XM_RX_LO_WM = 0x0118, /* 16 bit r/w Receive Low Water Mark */
+ XM_RX_HI_WM = 0x011a, /* 16 bit r/w Receive High Water Mark */
+ XM_RX_THR = 0x011c, /* 32 bit r/w Receive Request Threshold */
+ XM_DEV_ID = 0x0120, /* 32 bit r/o Device ID Register */
+ XM_MODE = 0x0124, /* 32 bit r/w Mode Register */
+ XM_LSA = 0x0128, /* NA reg r/o Last Source Register */
+ XM_TS_READ = 0x0130, /* 32 bit r/o Time Stamp Read Register */
+ XM_TS_LOAD = 0x0134, /* 32 bit r/o Time Stamp Load Value */
+ XM_STAT_CMD = 0x0200, /* 16 bit r/w Statistics Command Register */
+ XM_RX_CNT_EV = 0x0204, /* 32 bit r/o Rx Counter Event Register */
+ XM_TX_CNT_EV = 0x0208, /* 32 bit r/o Tx Counter Event Register */
+ XM_RX_EV_MSK = 0x020c, /* 32 bit r/w Rx Counter Event Mask */
+ XM_TX_EV_MSK = 0x0210, /* 32 bit r/w Tx Counter Event Mask */
+ XM_TXF_OK = 0x0280, /* 32 bit r/o Frames Transmitted OK Conuter */
+ XM_TXO_OK_HI = 0x0284, /* 32 bit r/o Octets Transmitted OK High Cnt*/
+ XM_TXO_OK_LO = 0x0288, /* 32 bit r/o Octets Transmitted OK Low Cnt */
+ XM_TXF_BC_OK = 0x028c, /* 32 bit r/o Broadcast Frames Xmitted OK */
+ XM_TXF_MC_OK = 0x0290, /* 32 bit r/o Multicast Frames Xmitted OK */
+ XM_TXF_UC_OK = 0x0294, /* 32 bit r/o Unicast Frames Xmitted OK */
+ XM_TXF_LONG = 0x0298, /* 32 bit r/o Tx Long Frame Counter */
+ XM_TXE_BURST = 0x029c, /* 32 bit r/o Tx Burst Event Counter */
+ XM_TXF_MPAUSE = 0x02a0, /* 32 bit r/o Tx Pause MAC Ctrl Frame Cnt */
+ XM_TXF_MCTRL = 0x02a4, /* 32 bit r/o Tx MAC Ctrl Frame Counter */
+ XM_TXF_SNG_COL = 0x02a8, /* 32 bit r/o Tx Single Collision Counter */
+ XM_TXF_MUL_COL = 0x02ac, /* 32 bit r/o Tx Multiple Collision Counter */
+ XM_TXF_ABO_COL = 0x02b0, /* 32 bit r/o Tx aborted due to Exces. Col. */
+ XM_TXF_LAT_COL = 0x02b4, /* 32 bit r/o Tx Late Collision Counter */
+ XM_TXF_DEF = 0x02b8, /* 32 bit r/o Tx Deferred Frame Counter */
+ XM_TXF_EX_DEF = 0x02bc, /* 32 bit r/o Tx Excessive Deferall Counter */
+ XM_TXE_FIFO_UR = 0x02c0, /* 32 bit r/o Tx FIFO Underrun Event Cnt */
+ XM_TXE_CS_ERR = 0x02c4, /* 32 bit r/o Tx Carrier Sense Error Cnt */
+ XM_TXP_UTIL = 0x02c8, /* 32 bit r/o Tx Utilization in % */
+ XM_TXF_64B = 0x02d0, /* 32 bit r/o 64 Byte Tx Frame Counter */
+ XM_TXF_127B = 0x02d4, /* 32 bit r/o 65-127 Byte Tx Frame Counter */
+ XM_TXF_255B = 0x02d8, /* 32 bit r/o 128-255 Byte Tx Frame Counter */
+ XM_TXF_511B = 0x02dc, /* 32 bit r/o 256-511 Byte Tx Frame Counter */
+ XM_TXF_1023B = 0x02e0, /* 32 bit r/o 512-1023 Byte Tx Frame Counter*/
+ XM_TXF_MAX_SZ = 0x02e4, /* 32 bit r/o 1024-MaxSize Byte Tx Frame Cnt*/
+ XM_RXF_OK = 0x0300, /* 32 bit r/o Frames Received OK */
+ XM_RXO_OK_HI = 0x0304, /* 32 bit r/o Octets Received OK High Cnt */
+ XM_RXO_OK_LO = 0x0308, /* 32 bit r/o Octets Received OK Low Counter*/
+ XM_RXF_BC_OK = 0x030c, /* 32 bit r/o Broadcast Frames Received OK */
+ XM_RXF_MC_OK = 0x0310, /* 32 bit r/o Multicast Frames Received OK */
+ XM_RXF_UC_OK = 0x0314, /* 32 bit r/o Unicast Frames Received OK */
+ XM_RXF_MPAUSE = 0x0318, /* 32 bit r/o Rx Pause MAC Ctrl Frame Cnt */
+ XM_RXF_MCTRL = 0x031c, /* 32 bit r/o Rx MAC Ctrl Frame Counter */
+ XM_RXF_INV_MP = 0x0320, /* 32 bit r/o Rx invalid Pause Frame Cnt */
+ XM_RXF_INV_MOC = 0x0324, /* 32 bit r/o Rx Frames with inv. MAC Opcode*/
+ XM_RXE_BURST = 0x0328, /* 32 bit r/o Rx Burst Event Counter */
+ XM_RXE_FMISS = 0x032c, /* 32 bit r/o Rx Missed Frames Event Cnt */
+ XM_RXF_FRA_ERR = 0x0330, /* 32 bit r/o Rx Framing Error Counter */
+ XM_RXE_FIFO_OV = 0x0334, /* 32 bit r/o Rx FIFO overflow Event Cnt */
+ XM_RXF_JAB_PKT = 0x0338, /* 32 bit r/o Rx Jabber Packet Frame Cnt */
+ XM_RXE_CAR_ERR = 0x033c, /* 32 bit r/o Rx Carrier Event Error Cnt */
+ XM_RXF_LEN_ERR = 0x0340, /* 32 bit r/o Rx in Range Length Error */
+ XM_RXE_SYM_ERR = 0x0344, /* 32 bit r/o Rx Symbol Error Counter */
+ XM_RXE_SHT_ERR = 0x0348, /* 32 bit r/o Rx Short Event Error Cnt */
+ XM_RXE_RUNT = 0x034c, /* 32 bit r/o Rx Runt Event Counter */
+ XM_RXF_LNG_ERR = 0x0350, /* 32 bit r/o Rx Frame too Long Error Cnt */
+ XM_RXF_FCS_ERR = 0x0354, /* 32 bit r/o Rx Frame Check Seq. Error Cnt */
+ XM_RXF_CEX_ERR = 0x035c, /* 32 bit r/o Rx Carrier Ext Error Frame Cnt*/
+ XM_RXP_UTIL = 0x0360, /* 32 bit r/o Rx Utilization in % */
+ XM_RXF_64B = 0x0368, /* 32 bit r/o 64 Byte Rx Frame Counter */
+ XM_RXF_127B = 0x036c, /* 32 bit r/o 65-127 Byte Rx Frame Counter */
+ XM_RXF_255B = 0x0370, /* 32 bit r/o 128-255 Byte Rx Frame Counter */
+ XM_RXF_511B = 0x0374, /* 32 bit r/o 256-511 Byte Rx Frame Counter */
+ XM_RXF_1023B = 0x0378, /* 32 bit r/o 512-1023 Byte Rx Frame Counter*/
+ XM_RXF_MAX_SZ = 0x037c, /* 32 bit r/o 1024-MaxSize Byte Rx Frame Cnt*/
+};
+
+/* XM_MMU_CMD 16 bit r/w MMU Command Register */
+enum {
+ XM_MMU_PHY_RDY = 1<<12,/* Bit 12: PHY Read Ready */
+ XM_MMU_PHY_BUSY = 1<<11,/* Bit 11: PHY Busy */
+ XM_MMU_IGN_PF = 1<<10,/* Bit 10: Ignore Pause Frame */
+ XM_MMU_MAC_LB = 1<<9, /* Bit 9: Enable MAC Loopback */
+ XM_MMU_FRC_COL = 1<<7, /* Bit 7: Force Collision */
+ XM_MMU_SIM_COL = 1<<6, /* Bit 6: Simulate Collision */
+ XM_MMU_NO_PRE = 1<<5, /* Bit 5: No MDIO Preamble */
+ XM_MMU_GMII_FD = 1<<4, /* Bit 4: GMII uses Full Duplex */
+ XM_MMU_RAT_CTRL = 1<<3, /* Bit 3: Enable Rate Control */
+ XM_MMU_GMII_LOOP= 1<<2, /* Bit 2: PHY is in Loopback Mode */
+ XM_MMU_ENA_RX = 1<<1, /* Bit 1: Enable Receiver */
+ XM_MMU_ENA_TX = 1<<0, /* Bit 0: Enable Transmitter */
+};
+
+
+/* XM_TX_CMD 16 bit r/w Transmit Command Register */
+enum {
+ XM_TX_BK2BK = 1<<6, /* Bit 6: Ignor Carrier Sense (Tx Bk2Bk)*/
+ XM_TX_ENC_BYP = 1<<5, /* Bit 5: Set Encoder in Bypass Mode */
+ XM_TX_SAM_LINE = 1<<4, /* Bit 4: (sc) Start utilization calculation */
+ XM_TX_NO_GIG_MD = 1<<3, /* Bit 3: Disable Carrier Extension */
+ XM_TX_NO_PRE = 1<<2, /* Bit 2: Disable Preamble Generation */
+ XM_TX_NO_CRC = 1<<1, /* Bit 1: Disable CRC Generation */
+ XM_TX_AUTO_PAD = 1<<0, /* Bit 0: Enable Automatic Padding */
+};
+
+/* XM_TX_RT_LIM 16 bit r/w Transmit Retry Limit Register */
+#define XM_RT_LIM_MSK 0x1f /* Bit 4..0: Tx Retry Limit */
+
+
+/* XM_TX_STIME 16 bit r/w Transmit Slottime Register */
+#define XM_STIME_MSK 0x7f /* Bit 6..0: Tx Slottime bits */
+
+
+/* XM_TX_IPG 16 bit r/w Transmit Inter Packet Gap */
+#define XM_IPG_MSK 0xff /* Bit 7..0: IPG value bits */
+
+
+/* XM_RX_CMD 16 bit r/w Receive Command Register */
+enum {
+ XM_RX_LENERR_OK = 1<<8, /* Bit 8 don't set Rx Err bit for */
+ /* inrange error packets */
+ XM_RX_BIG_PK_OK = 1<<7, /* Bit 7 don't set Rx Err bit for */
+ /* jumbo packets */
+ XM_RX_IPG_CAP = 1<<6, /* Bit 6 repl. type field with IPG */
+ XM_RX_TP_MD = 1<<5, /* Bit 5: Enable transparent Mode */
+ XM_RX_STRIP_FCS = 1<<4, /* Bit 4: Enable FCS Stripping */
+ XM_RX_SELF_RX = 1<<3, /* Bit 3: Enable Rx of own packets */
+ XM_RX_SAM_LINE = 1<<2, /* Bit 2: (sc) Start utilization calculation */
+ XM_RX_STRIP_PAD = 1<<1, /* Bit 1: Strip pad bytes of Rx frames */
+ XM_RX_DIS_CEXT = 1<<0, /* Bit 0: Disable carrier ext. check */
+};
+
+
+/* XM_PHY_ADDR 16 bit r/w PHY Address Register */
+#define XM_PHY_ADDR_SZ 0x1f /* Bit 4..0: PHY Address bits */
+
+
+/* XM_GP_PORT 32 bit r/w General Purpose Port Register */
+enum {
+ XM_GP_ANIP = 1<<6, /* Bit 6: (ro) Auto-Neg. in progress */
+ XM_GP_FRC_INT = 1<<5, /* Bit 5: (sc) Force Interrupt */
+ XM_GP_RES_MAC = 1<<3, /* Bit 3: (sc) Reset MAC and FIFOs */
+ XM_GP_RES_STAT = 1<<2, /* Bit 2: (sc) Reset the statistics module */
+ XM_GP_INP_ASS = 1<<0, /* Bit 0: (ro) GP Input Pin asserted */
+};
+
+
+/* XM_IMSK 16 bit r/w Interrupt Mask Register */
+/* XM_ISRC 16 bit r/o Interrupt Status Register */
+enum {
+ XM_IS_LNK_AE = 1<<14, /* Bit 14: Link Asynchronous Event */
+ XM_IS_TX_ABORT = 1<<13, /* Bit 13: Transmit Abort, late Col. etc */
+ XM_IS_FRC_INT = 1<<12, /* Bit 12: Force INT bit set in GP */
+ XM_IS_INP_ASS = 1<<11, /* Bit 11: Input Asserted, GP bit 0 set */
+ XM_IS_LIPA_RC = 1<<10, /* Bit 10: Link Partner requests config */
+ XM_IS_RX_PAGE = 1<<9, /* Bit 9: Page Received */
+ XM_IS_TX_PAGE = 1<<8, /* Bit 8: Next Page Loaded for Transmit */
+ XM_IS_AND = 1<<7, /* Bit 7: Auto-Negotiation Done */
+ XM_IS_TSC_OV = 1<<6, /* Bit 6: Time Stamp Counter Overflow */
+ XM_IS_RXC_OV = 1<<5, /* Bit 5: Rx Counter Event Overflow */
+ XM_IS_TXC_OV = 1<<4, /* Bit 4: Tx Counter Event Overflow */
+ XM_IS_RXF_OV = 1<<3, /* Bit 3: Receive FIFO Overflow */
+ XM_IS_TXF_UR = 1<<2, /* Bit 2: Transmit FIFO Underrun */
+ XM_IS_TX_COMP = 1<<1, /* Bit 1: Frame Tx Complete */
+ XM_IS_RX_COMP = 1<<0, /* Bit 0: Frame Rx Complete */
+};
+
+#define XM_DEF_MSK (~(XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE | \
+ XM_IS_AND | XM_IS_RXC_OV | XM_IS_TXC_OV | \
+ XM_IS_RXF_OV | XM_IS_TXF_UR))
+
+
+/* XM_HW_CFG 16 bit r/w Hardware Config Register */
+enum {
+ XM_HW_GEN_EOP = 1<<3, /* Bit 3: generate End of Packet pulse */
+ XM_HW_COM4SIG = 1<<2, /* Bit 2: use Comma Detect for Sig. Det.*/
+ XM_HW_GMII_MD = 1<<0, /* Bit 0: GMII Interface selected */
+};
+
+
+/* XM_TX_LO_WM 16 bit r/w Tx FIFO Low Water Mark */
+/* XM_TX_HI_WM 16 bit r/w Tx FIFO High Water Mark */
+#define XM_TX_WM_MSK 0x01ff /* Bit 9.. 0 Tx FIFO Watermark bits */
+
+/* XM_TX_THR 16 bit r/w Tx Request Threshold */
+/* XM_HT_THR 16 bit r/w Host Request Threshold */
+/* XM_RX_THR 16 bit r/w Rx Request Threshold */
+#define XM_THR_MSK 0x03ff /* Bit 10.. 0 Rx/Tx Request Threshold bits */
+
+
+/* XM_TX_STAT 32 bit r/o Tx Status LIFO Register */
+enum {
+ XM_ST_VALID = (1UL<<31), /* Bit 31: Status Valid */
+ XM_ST_BYTE_CNT = (0x3fffL<<17), /* Bit 30..17: Tx frame Length */
+ XM_ST_RETRY_CNT = (0x1fL<<12), /* Bit 16..12: Retry Count */
+ XM_ST_EX_COL = 1<<11, /* Bit 11: Excessive Collisions */
+ XM_ST_EX_DEF = 1<<10, /* Bit 10: Excessive Deferral */
+ XM_ST_BURST = 1<<9, /* Bit 9: p. xmitted in burst md*/
+ XM_ST_DEFER = 1<<8, /* Bit 8: packet was defered */
+ XM_ST_BC = 1<<7, /* Bit 7: Broadcast packet */
+ XM_ST_MC = 1<<6, /* Bit 6: Multicast packet */
+ XM_ST_UC = 1<<5, /* Bit 5: Unicast packet */
+ XM_ST_TX_UR = 1<<4, /* Bit 4: FIFO Underrun occured */
+ XM_ST_CS_ERR = 1<<3, /* Bit 3: Carrier Sense Error */
+ XM_ST_LAT_COL = 1<<2, /* Bit 2: Late Collision Error */
+ XM_ST_MUL_COL = 1<<1, /* Bit 1: Multiple Collisions */
+ XM_ST_SGN_COL = 1<<0, /* Bit 0: Single Collision */
+};
+
+/* XM_RX_LO_WM 16 bit r/w Receive Low Water Mark */
+/* XM_RX_HI_WM 16 bit r/w Receive High Water Mark */
+#define XM_RX_WM_MSK 0x03ff /* Bit 11.. 0: Rx FIFO Watermark bits */
+
+
+/* XM_DEV_ID 32 bit r/o Device ID Register */
+#define XM_DEV_OUI (0x00ffffffUL<<8) /* Bit 31..8: Device OUI */
+#define XM_DEV_REV (0x07L << 5) /* Bit 7..5: Chip Rev Num */
+
+
+/* XM_MODE 32 bit r/w Mode Register */
+enum {
+ XM_MD_ENA_REJ = 1<<26, /* Bit 26: Enable Frame Reject */
+ XM_MD_SPOE_E = 1<<25, /* Bit 25: Send Pause on Edge */
+ /* extern generated */
+ XM_MD_TX_REP = 1<<24, /* Bit 24: Transmit Repeater Mode */
+ XM_MD_SPOFF_I = 1<<23, /* Bit 23: Send Pause on FIFO full */
+ /* intern generated */
+ XM_MD_LE_STW = 1<<22, /* Bit 22: Rx Stat Word in Little Endian */
+ XM_MD_TX_CONT = 1<<21, /* Bit 21: Send Continuous */
+ XM_MD_TX_PAUSE = 1<<20, /* Bit 20: (sc) Send Pause Frame */
+ XM_MD_ATS = 1<<19, /* Bit 19: Append Time Stamp */
+ XM_MD_SPOL_I = 1<<18, /* Bit 18: Send Pause on Low */
+ /* intern generated */
+ XM_MD_SPOH_I = 1<<17, /* Bit 17: Send Pause on High */
+ /* intern generated */
+ XM_MD_CAP = 1<<16, /* Bit 16: Check Address Pair */
+ XM_MD_ENA_HASH = 1<<15, /* Bit 15: Enable Hashing */
+ XM_MD_CSA = 1<<14, /* Bit 14: Check Station Address */
+ XM_MD_CAA = 1<<13, /* Bit 13: Check Address Array */
+ XM_MD_RX_MCTRL = 1<<12, /* Bit 12: Rx MAC Control Frame */
+ XM_MD_RX_RUNT = 1<<11, /* Bit 11: Rx Runt Frames */
+ XM_MD_RX_IRLE = 1<<10, /* Bit 10: Rx in Range Len Err Frame */
+ XM_MD_RX_LONG = 1<<9, /* Bit 9: Rx Long Frame */
+ XM_MD_RX_CRCE = 1<<8, /* Bit 8: Rx CRC Error Frame */
+ XM_MD_RX_ERR = 1<<7, /* Bit 7: Rx Error Frame */
+ XM_MD_DIS_UC = 1<<6, /* Bit 6: Disable Rx Unicast */
+ XM_MD_DIS_MC = 1<<5, /* Bit 5: Disable Rx Multicast */
+ XM_MD_DIS_BC = 1<<4, /* Bit 4: Disable Rx Broadcast */
+ XM_MD_ENA_PROM = 1<<3, /* Bit 3: Enable Promiscuous */
+ XM_MD_ENA_BE = 1<<2, /* Bit 2: Enable Big Endian */
+ XM_MD_FTF = 1<<1, /* Bit 1: (sc) Flush Tx FIFO */
+ XM_MD_FRF = 1<<0, /* Bit 0: (sc) Flush Rx FIFO */
+};
+
+#define XM_PAUSE_MODE (XM_MD_SPOE_E | XM_MD_SPOL_I | XM_MD_SPOH_I)
+#define XM_DEF_MODE (XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\
+ XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA | XM_MD_CAA)
+
+/* XM_STAT_CMD 16 bit r/w Statistics Command Register */
+enum {
+ XM_SC_SNP_RXC = 1<<5, /* Bit 5: (sc) Snap Rx Counters */
+ XM_SC_SNP_TXC = 1<<4, /* Bit 4: (sc) Snap Tx Counters */
+ XM_SC_CP_RXC = 1<<3, /* Bit 3: Copy Rx Counters Continuously */
+ XM_SC_CP_TXC = 1<<2, /* Bit 2: Copy Tx Counters Continuously */
+ XM_SC_CLR_RXC = 1<<1, /* Bit 1: (sc) Clear Rx Counters */
+ XM_SC_CLR_TXC = 1<<0, /* Bit 0: (sc) Clear Tx Counters */
+};
+
+
+/* XM_RX_CNT_EV 32 bit r/o Rx Counter Event Register */
+/* XM_RX_EV_MSK 32 bit r/w Rx Counter Event Mask */
+enum {
+ XMR_MAX_SZ_OV = 1<<31, /* Bit 31: 1024-MaxSize Rx Cnt Ov*/
+ XMR_1023B_OV = 1<<30, /* Bit 30: 512-1023Byte Rx Cnt Ov*/
+ XMR_511B_OV = 1<<29, /* Bit 29: 256-511 Byte Rx Cnt Ov*/
+ XMR_255B_OV = 1<<28, /* Bit 28: 128-255 Byte Rx Cnt Ov*/
+ XMR_127B_OV = 1<<27, /* Bit 27: 65-127 Byte Rx Cnt Ov */
+ XMR_64B_OV = 1<<26, /* Bit 26: 64 Byte Rx Cnt Ov */
+ XMR_UTIL_OV = 1<<25, /* Bit 25: Rx Util Cnt Overflow */
+ XMR_UTIL_UR = 1<<24, /* Bit 24: Rx Util Cnt Underrun */
+ XMR_CEX_ERR_OV = 1<<23, /* Bit 23: CEXT Err Cnt Ov */
+ XMR_FCS_ERR_OV = 1<<21, /* Bit 21: Rx FCS Error Cnt Ov */
+ XMR_LNG_ERR_OV = 1<<20, /* Bit 20: Rx too Long Err Cnt Ov*/
+ XMR_RUNT_OV = 1<<19, /* Bit 19: Runt Event Cnt Ov */
+ XMR_SHT_ERR_OV = 1<<18, /* Bit 18: Rx Short Ev Err Cnt Ov*/
+ XMR_SYM_ERR_OV = 1<<17, /* Bit 17: Rx Sym Err Cnt Ov */
+ XMR_CAR_ERR_OV = 1<<15, /* Bit 15: Rx Carr Ev Err Cnt Ov */
+ XMR_JAB_PKT_OV = 1<<14, /* Bit 14: Rx Jabb Packet Cnt Ov */
+ XMR_FIFO_OV = 1<<13, /* Bit 13: Rx FIFO Ov Ev Cnt Ov */
+ XMR_FRA_ERR_OV = 1<<12, /* Bit 12: Rx Framing Err Cnt Ov */
+ XMR_FMISS_OV = 1<<11, /* Bit 11: Rx Missed Ev Cnt Ov */
+ XMR_BURST = 1<<10, /* Bit 10: Rx Burst Event Cnt Ov */
+ XMR_INV_MOC = 1<<9, /* Bit 9: Rx with inv. MAC OC Ov*/
+ XMR_INV_MP = 1<<8, /* Bit 8: Rx inv Pause Frame Ov */
+ XMR_MCTRL_OV = 1<<7, /* Bit 7: Rx MAC Ctrl-F Cnt Ov */
+ XMR_MPAUSE_OV = 1<<6, /* Bit 6: Rx Pause MAC Ctrl-F Ov*/
+ XMR_UC_OK_OV = 1<<5, /* Bit 5: Rx Unicast Frame CntOv*/
+ XMR_MC_OK_OV = 1<<4, /* Bit 4: Rx Multicast Cnt Ov */
+ XMR_BC_OK_OV = 1<<3, /* Bit 3: Rx Broadcast Cnt Ov */
+ XMR_OK_LO_OV = 1<<2, /* Bit 2: Octets Rx OK Low CntOv*/
+ XMR_OK_HI_OV = 1<<1, /* Bit 1: Octets Rx OK Hi Cnt Ov*/
+ XMR_OK_OV = 1<<0, /* Bit 0: Frames Received Ok Ov */
+};
+
+#define XMR_DEF_MSK (XMR_OK_LO_OV | XMR_OK_HI_OV)
+
+/* XM_TX_CNT_EV 32 bit r/o Tx Counter Event Register */
+/* XM_TX_EV_MSK 32 bit r/w Tx Counter Event Mask */
+enum {
+ XMT_MAX_SZ_OV = 1<<25, /* Bit 25: 1024-MaxSize Tx Cnt Ov*/
+ XMT_1023B_OV = 1<<24, /* Bit 24: 512-1023Byte Tx Cnt Ov*/
+ XMT_511B_OV = 1<<23, /* Bit 23: 256-511 Byte Tx Cnt Ov*/
+ XMT_255B_OV = 1<<22, /* Bit 22: 128-255 Byte Tx Cnt Ov*/
+ XMT_127B_OV = 1<<21, /* Bit 21: 65-127 Byte Tx Cnt Ov */
+ XMT_64B_OV = 1<<20, /* Bit 20: 64 Byte Tx Cnt Ov */
+ XMT_UTIL_OV = 1<<19, /* Bit 19: Tx Util Cnt Overflow */
+ XMT_UTIL_UR = 1<<18, /* Bit 18: Tx Util Cnt Underrun */
+ XMT_CS_ERR_OV = 1<<17, /* Bit 17: Tx Carr Sen Err Cnt Ov*/
+ XMT_FIFO_UR_OV = 1<<16, /* Bit 16: Tx FIFO Ur Ev Cnt Ov */
+ XMT_EX_DEF_OV = 1<<15, /* Bit 15: Tx Ex Deferall Cnt Ov */
+ XMT_DEF = 1<<14, /* Bit 14: Tx Deferred Cnt Ov */
+ XMT_LAT_COL_OV = 1<<13, /* Bit 13: Tx Late Col Cnt Ov */
+ XMT_ABO_COL_OV = 1<<12, /* Bit 12: Tx abo dueto Ex Col Ov*/
+ XMT_MUL_COL_OV = 1<<11, /* Bit 11: Tx Mult Col Cnt Ov */
+ XMT_SNG_COL = 1<<10, /* Bit 10: Tx Single Col Cnt Ov */
+ XMT_MCTRL_OV = 1<<9, /* Bit 9: Tx MAC Ctrl Counter Ov*/
+ XMT_MPAUSE = 1<<8, /* Bit 8: Tx Pause MAC Ctrl-F Ov*/
+ XMT_BURST = 1<<7, /* Bit 7: Tx Burst Event Cnt Ov */
+ XMT_LONG = 1<<6, /* Bit 6: Tx Long Frame Cnt Ov */
+ XMT_UC_OK_OV = 1<<5, /* Bit 5: Tx Unicast Cnt Ov */
+ XMT_MC_OK_OV = 1<<4, /* Bit 4: Tx Multicast Cnt Ov */
+ XMT_BC_OK_OV = 1<<3, /* Bit 3: Tx Broadcast Cnt Ov */
+ XMT_OK_LO_OV = 1<<2, /* Bit 2: Octets Tx OK Low CntOv*/
+ XMT_OK_HI_OV = 1<<1, /* Bit 1: Octets Tx OK Hi Cnt Ov*/
+ XMT_OK_OV = 1<<0, /* Bit 0: Frames Tx Ok Ov */
+};
+
+#define XMT_DEF_MSK (XMT_OK_LO_OV | XMT_OK_HI_OV)
+
+struct skge_rx_desc {
+ u32 control;
+ u32 next_offset;
+ u32 dma_lo;
+ u32 dma_hi;
+ u32 status;
+ u32 timestamp;
+ u16 csum2;
+ u16 csum1;
+ u16 csum2_start;
+ u16 csum1_start;
+};
+
+struct skge_tx_desc {
+ u32 control;
+ u32 next_offset;
+ u32 dma_lo;
+ u32 dma_hi;
+ u32 status;
+ u32 csum_offs;
+ u16 csum_write;
+ u16 csum_start;
+ u32 rsvd;
+};
+
+struct skge_element {
+ struct skge_element *next;
+ void *desc;
+ struct sk_buff *skb;
+ DECLARE_PCI_UNMAP_ADDR(mapaddr);
+ DECLARE_PCI_UNMAP_LEN(maplen);
+};
+
+struct skge_ring {
+ struct skge_element *to_clean;
+ struct skge_element *to_use;
+ struct skge_element *start;
+ unsigned long count;
+};
+
+
+struct skge_hw {
+ void __iomem *regs;
+ struct pci_dev *pdev;
+ u32 intr_mask;
+ struct net_device *dev[2];
+
+ u8 mac_cfg;
+ u8 chip_id;
+ u8 phy_type;
+ u8 pmd_type;
+ u16 phy_addr;
+
+ u32 ram_size;
+ u32 ram_offset;
+
+ struct tasklet_struct ext_tasklet;
+ spinlock_t phy_lock;
+};
+
+static inline int isdualport(const struct skge_hw *hw)
+{
+ return !(hw->mac_cfg & CFG_SNG_MAC);
+}
+
+static inline u8 chip_rev(const struct skge_hw *hw)
+{
+ return (hw->mac_cfg & CFG_CHIP_R_MSK) >> 4;
+}
+
+static inline int iscopper(const struct skge_hw *hw)
+{
+ return (hw->pmd_type == 'T');
+}
+
+enum {
+ FLOW_MODE_NONE = 0, /* No Flow-Control */
+ FLOW_MODE_LOC_SEND = 1, /* Local station sends PAUSE */
+ FLOW_MODE_REM_SEND = 2, /* Symmetric or just remote */
+ FLOW_MODE_SYMMETRIC = 3, /* Both stations may send PAUSE */
+};
+
+struct skge_port {
+ u32 msg_enable;
+ struct skge_hw *hw;
+ struct net_device *netdev;
+ int port;
+
+ spinlock_t tx_lock;
+ u32 tx_avail;
+ struct skge_ring tx_ring;
+ struct skge_ring rx_ring;
+
+ struct net_device_stats net_stats;
+
+ u8 rx_csum;
+ u8 blink_on;
+ u8 flow_control;
+ u8 wol;
+ u8 autoneg; /* AUTONEG_ENABLE, AUTONEG_DISABLE */
+ u8 duplex; /* DUPLEX_HALF, DUPLEX_FULL */
+ u16 speed; /* SPEED_1000, SPEED_100, ... */
+ u32 advertising;
+
+ void *mem; /* PCI memory for rings */
+ dma_addr_t dma;
+ unsigned long mem_size;
+
+ struct timer_list link_check;
+ struct timer_list led_blink;
+};
+
+
+/* Register accessor for memory mapped device */
+static inline u32 skge_read32(const struct skge_hw *hw, int reg)
+{
+ return readl(hw->regs + reg);
+
+}
+
+static inline u16 skge_read16(const struct skge_hw *hw, int reg)
+{
+ return readw(hw->regs + reg);
+}
+
+static inline u8 skge_read8(const struct skge_hw *hw, int reg)
+{
+ return readb(hw->regs + reg);
+}
+
+static inline void skge_write32(const struct skge_hw *hw, int reg, u32 val)
+{
+ writel(val, hw->regs + reg);
+}
+
+static inline void skge_write16(const struct skge_hw *hw, int reg, u16 val)
+{
+ writew(val, hw->regs + reg);
+}
+
+static inline void skge_write8(const struct skge_hw *hw, int reg, u8 val)
+{
+ writeb(val, hw->regs + reg);
+}
+
+/* MAC Related Registers inside the device. */
+#define SKGEMAC_REG(port,reg) (((port)<<7)+(reg))
+
+/* PCI config space can be accessed via memory mapped space */
+#define SKGEPCI_REG(reg) ((reg)+ 0x380)
+
+#define SKGEXM_REG(port, reg) \
+ ((BASE_XMAC_1 + (port) * (BASE_XMAC_2 - BASE_XMAC_1)) | (reg) << 1)
+
+static inline u32 skge_xm_read32(const struct skge_hw *hw, int port, int reg)
+{
+ return skge_read32(hw, SKGEXM_REG(port,reg));
+}
+
+static inline u16 skge_xm_read16(const struct skge_hw *hw, int port, int reg)
+{
+ return skge_read16(hw, SKGEXM_REG(port,reg));
+}
+
+static inline u8 skge_xm_read8(const struct skge_hw *hw, int port, int reg)
+{
+ return skge_read8(hw, SKGEXM_REG(port,reg));
+}
+
+static inline void skge_xm_write32(const struct skge_hw *hw, int port, int r, u32 v)
+{
+ skge_write32(hw, SKGEXM_REG(port,r), v);
+}
+
+static inline void skge_xm_write16(const struct skge_hw *hw, int port, int r, u16 v)
+{
+ skge_write16(hw, SKGEXM_REG(port,r), v);
+}
+
+static inline void skge_xm_write8(const struct skge_hw *hw, int port, int r, u8 v)
+{
+ skge_write8(hw, SKGEXM_REG(port,r), v);
+}
+
+static inline void skge_xm_outhash(const struct skge_hw *hw, int port, int reg,
+ const u8 *hash)
+{
+ skge_xm_write16(hw, port, reg,
+ (u16)hash[0] | ((u16)hash[1] << 8));
+ skge_xm_write16(hw, port, reg+2,
+ (u16)hash[2] | ((u16)hash[3] << 8));
+ skge_xm_write16(hw, port, reg+4,
+ (u16)hash[4] | ((u16)hash[5] << 8));
+ skge_xm_write16(hw, port, reg+6,
+ (u16)hash[6] | ((u16)hash[7] << 8));
+}
+
+static inline void skge_xm_outaddr(const struct skge_hw *hw, int port, int reg,
+ const u8 *addr)
+{
+ skge_xm_write16(hw, port, reg,
+ (u16)addr[0] | ((u16)addr[1] << 8));
+ skge_xm_write16(hw, port, reg,
+ (u16)addr[2] | ((u16)addr[3] << 8));
+ skge_xm_write16(hw, port, reg,
+ (u16)addr[4] | ((u16)addr[5] << 8));
+}
+
+
+#define SKGEGMA_REG(port,reg) \
+ ((reg) + BASE_GMAC_1 + \
+ (port) * (BASE_GMAC_2-BASE_GMAC_1))
+
+static inline u16 skge_gma_read16(const struct skge_hw *hw, int port, int reg)
+{
+ return skge_read16(hw, SKGEGMA_REG(port,reg));
+}
+
+static inline u32 skge_gma_read32(const struct skge_hw *hw, int port, int reg)
+{
+ return (u32) skge_read16(hw, SKGEGMA_REG(port,reg))
+ | ((u32)skge_read16(hw, SKGEGMA_REG(port,reg+4)) << 16);
+}
+
+static inline u8 skge_gma_read8(const struct skge_hw *hw, int port, int reg)
+{
+ return skge_read8(hw, SKGEGMA_REG(port,reg));
+}
+
+static inline void skge_gma_write16(const struct skge_hw *hw, int port, int r, u16 v)
+{
+ skge_write16(hw, SKGEGMA_REG(port,r), v);
+}
+
+static inline void skge_gma_write32(const struct skge_hw *hw, int port, int r, u32 v)
+{
+ skge_write16(hw, SKGEGMA_REG(port, r), (u16) v);
+ skge_write32(hw, SKGEGMA_REG(port, r+4), (u16)(v >> 16));
+}
+
+static inline void skge_gma_write8(const struct skge_hw *hw, int port, int r, u8 v)
+{
+ skge_write8(hw, SKGEGMA_REG(port,r), v);
+}
+
+static inline void skge_gm_set_addr(struct skge_hw *hw, int port, int reg,
+ const u8 *addr)
+{
+ skge_gma_write16(hw, port, reg,
+ (u16) addr[0] | ((u16) addr[1] << 8));
+ skge_gma_write16(hw, port, reg+4,
+ (u16) addr[2] | ((u16) addr[3] << 8));
+ skge_gma_write16(hw, port, reg+8,
+ (u16) addr[4] | ((u16) addr[5] << 8));
+}
+
+#endif
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 5e561ba4433..fd80048f7f7 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -129,7 +129,7 @@ MODULE_PARM_DESC(nowait, "set to 1 for no wait state");
/*
* Transmit timeout, default 5 seconds.
*/
-static int watchdog = 5000;
+static int watchdog = 1000;
module_param(watchdog, int, 0400);
MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
@@ -660,15 +660,14 @@ static void smc_hardware_send_pkt(unsigned long data)
SMC_outw(((len & 1) ? (0x2000 | buf[len-1]) : 0), ioaddr, DATA_REG);
/*
- * If THROTTLE_TX_PKTS is set, we look at the TX_EMPTY flag
- * before queueing this packet for TX, and if it's clear then
- * we stop the queue here. This will have the effect of
- * having at most 2 packets queued for TX in the chip's memory
- * at all time. If THROTTLE_TX_PKTS is not set then the queue
- * is stopped only when memory allocation (MC_ALLOC) does not
- * succeed right away.
+ * If THROTTLE_TX_PKTS is set, we stop the queue here. This will
+ * have the effect of having at most one packet queued for TX
+ * in the chip's memory at all time.
+ *
+ * If THROTTLE_TX_PKTS is not set then the queue is stopped only
+ * when memory allocation (MC_ALLOC) does not succeed right away.
*/
- if (THROTTLE_TX_PKTS && !(SMC_GET_INT() & IM_TX_EMPTY_INT))
+ if (THROTTLE_TX_PKTS)
netif_stop_queue(dev);
/* queue the packet for TX */
@@ -792,17 +791,20 @@ static void smc_tx(struct net_device *dev)
DBG(2, "%s: TX STATUS 0x%04x PNR 0x%02x\n",
dev->name, tx_status, packet_no);
- if (!(tx_status & TS_SUCCESS))
+ if (!(tx_status & ES_TX_SUC))
lp->stats.tx_errors++;
- if (tx_status & TS_LOSTCAR)
+
+ if (tx_status & ES_LOSTCARR)
lp->stats.tx_carrier_errors++;
- if (tx_status & TS_LATCOL) {
- PRINTK("%s: late collision occurred on last xmit\n", dev->name);
+ if (tx_status & (ES_LATCOL | ES_16COL)) {
+ PRINTK("%s: %s occurred on last xmit\n", dev->name,
+ (tx_status & ES_LATCOL) ?
+ "late collision" : "too many collisions");
lp->stats.tx_window_errors++;
if (!(lp->stats.tx_window_errors & 63) && net_ratelimit()) {
- printk(KERN_INFO "%s: unexpectedly large numbers of "
- "late collisions. Please check duplex "
+ printk(KERN_INFO "%s: unexpectedly large number of "
+ "bad collisions. Please check duplex "
"setting.\n", dev->name);
}
}
@@ -1236,7 +1238,7 @@ static void smc_10bt_check_media(struct net_device *dev, int init)
old_carrier = netif_carrier_ok(dev) ? 1 : 0;
SMC_SELECT_BANK(0);
- new_carrier = SMC_inw(ioaddr, EPH_STATUS_REG) & ES_LINK_OK ? 1 : 0;
+ new_carrier = (SMC_GET_EPH_STATUS() & ES_LINK_OK) ? 1 : 0;
SMC_SELECT_BANK(2);
if (init || (old_carrier != new_carrier)) {
@@ -1308,15 +1310,16 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
if (!status)
break;
- if (status & IM_RCV_INT) {
- DBG(3, "%s: RX irq\n", dev->name);
- smc_rcv(dev);
- } else if (status & IM_TX_INT) {
+ if (status & IM_TX_INT) {
+ /* do this before RX as it will free memory quickly */
DBG(3, "%s: TX int\n", dev->name);
smc_tx(dev);
SMC_ACK_INT(IM_TX_INT);
if (THROTTLE_TX_PKTS)
netif_wake_queue(dev);
+ } else if (status & IM_RCV_INT) {
+ DBG(3, "%s: RX irq\n", dev->name);
+ smc_rcv(dev);
} else if (status & IM_ALLOC_INT) {
DBG(3, "%s: Allocation irq\n", dev->name);
tasklet_hi_schedule(&lp->tx_task);
@@ -1337,7 +1340,10 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
/* multiple collisions */
lp->stats.collisions += card_stats & 0xF;
} else if (status & IM_RX_OVRN_INT) {
- DBG(1, "%s: RX overrun\n", dev->name);
+ DBG(1, "%s: RX overrun (EPH_ST 0x%04x)\n", dev->name,
+ ({ int eph_st; SMC_SELECT_BANK(0);
+ eph_st = SMC_GET_EPH_STATUS();
+ SMC_SELECT_BANK(2); eph_st; }) );
SMC_ACK_INT(IM_RX_OVRN_INT);
lp->stats.rx_errors++;
lp->stats.rx_fifo_errors++;
@@ -1389,7 +1395,7 @@ static void smc_timeout(struct net_device *dev)
{
struct smc_local *lp = netdev_priv(dev);
void __iomem *ioaddr = lp->base;
- int status, mask, meminfo, fifo;
+ int status, mask, eph_st, meminfo, fifo;
DBG(2, "%s: %s\n", dev->name, __FUNCTION__);
@@ -1398,11 +1404,13 @@ static void smc_timeout(struct net_device *dev)
mask = SMC_GET_INT_MASK();
fifo = SMC_GET_FIFO();
SMC_SELECT_BANK(0);
+ eph_st = SMC_GET_EPH_STATUS();
meminfo = SMC_GET_MIR();
SMC_SELECT_BANK(2);
spin_unlock_irq(&lp->lock);
- PRINTK( "%s: INT 0x%02x MASK 0x%02x MEM 0x%04x FIFO 0x%04x\n",
- dev->name, status, mask, meminfo, fifo );
+ PRINTK( "%s: TX timeout (INT 0x%02x INTMASK 0x%02x "
+ "MEM 0x%04x FIFO 0x%04x EPH_ST 0x%04x)\n",
+ dev->name, status, mask, meminfo, fifo, eph_st );
smc_reset(dev);
smc_enable(dev);
@@ -1863,7 +1871,7 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr)
SMC_SELECT_BANK(1);
val = SMC_GET_BASE();
val = ((val & 0x1F00) >> 3) << SMC_IO_SHIFT;
- if (((unsigned long)ioaddr & ((PAGE_SIZE-1)<<SMC_IO_SHIFT)) != val) { /*XXX: WTF? */
+ if (((unsigned int)ioaddr & (0x3e0 << SMC_IO_SHIFT)) != val) {
printk("%s: IOADDR %p doesn't match configuration (%x).\n",
CARDNAME, ioaddr, val);
}
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index ddd2688e7d3..946528e6b74 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -151,7 +151,7 @@
/* We actually can't write halfwords properly if not word aligned */
static inline void
-SMC_outw(u16 val, unsigned long ioaddr, int reg)
+SMC_outw(u16 val, void __iomem *ioaddr, int reg)
{
if (reg & 2) {
unsigned int v = val << 16;
@@ -317,7 +317,7 @@ static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l)
#define SMC_insl(a, r, p, l) \
smc_pxa_dma_insl(a, lp->physaddr, r, dev->dma, p, l)
static inline void
-smc_pxa_dma_insl(u_long ioaddr, u_long physaddr, int reg, int dma,
+smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
u_char *buf, int len)
{
dma_addr_t dmabuf;
@@ -355,7 +355,7 @@ smc_pxa_dma_insl(u_long ioaddr, u_long physaddr, int reg, int dma,
#define SMC_insw(a, r, p, l) \
smc_pxa_dma_insw(a, lp->physaddr, r, dev->dma, p, l)
static inline void
-smc_pxa_dma_insw(u_long ioaddr, u_long physaddr, int reg, int dma,
+smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
u_char *buf, int len)
{
dma_addr_t dmabuf;
@@ -681,14 +681,6 @@ static const char * chip_ids[ 16 ] = {
/*
- . Transmit status bits
-*/
-#define TS_SUCCESS 0x0001
-#define TS_LOSTCAR 0x0400
-#define TS_LATCOL 0x0200
-#define TS_16COL 0x0010
-
-/*
. Receive status bits
*/
#define RS_ALGNERR 0x8000
@@ -845,6 +837,7 @@ static const char * chip_ids[ 16 ] = {
#define SMC_GET_FIFO() SMC_inw( ioaddr, FIFO_REG )
#define SMC_GET_PTR() SMC_inw( ioaddr, PTR_REG )
#define SMC_SET_PTR(x) SMC_outw( x, ioaddr, PTR_REG )
+#define SMC_GET_EPH_STATUS() SMC_inw( ioaddr, EPH_STATUS_REG )
#define SMC_GET_RCR() SMC_inw( ioaddr, RCR_REG )
#define SMC_SET_RCR(x) SMC_outw( x, ioaddr, RCR_REG )
#define SMC_GET_REV() SMC_inw( ioaddr, REV_REG )
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 236bdd3f6ba..12e2b6826fa 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -2,7 +2,7 @@
/*
Written 1998-2000 by Donald Becker.
- Current maintainer is Ion Badulescu <ionut@cs.columbia.edu>. Please
+ Current maintainer is Ion Badulescu <ionut ta badula tod org>. Please
send all bug reports to me, and not to Donald Becker, as this code
has been heavily modified from Donald's original version.
@@ -129,12 +129,18 @@
- put the chip to a D3 slumber on driver unload
- added config option to enable/disable NAPI
-TODO: bugfixes (no bugs known as of right now)
+ LK1.4.2 (Ion Badulescu)
+ - finally added firmware (GPL'ed by Adaptec)
+ - removed compatibility code for 2.2.x
+
+TODO: - fix forced speed/duplexing code (broken a long time ago, when
+ somebody converted the driver to use the generic MII code)
+ - fix VLAN support
*/
#define DRV_NAME "starfire"
-#define DRV_VERSION "1.03+LK1.4.1"
-#define DRV_RELDATE "February 10, 2002"
+#define DRV_VERSION "1.03+LK1.4.2"
+#define DRV_RELDATE "January 19, 2005"
#include <linux/config.h>
#include <linux/version.h>
@@ -145,25 +151,15 @@ TODO: bugfixes (no bugs known as of right now)
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/crc32.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/if_vlan.h>
#include <asm/processor.h> /* Processor type for cache alignment. */
#include <asm/uaccess.h>
#include <asm/io.h>
-/*
- * Adaptec's license for their drivers (which is where I got the
- * firmware files) does not allow one to redistribute them. Thus, we can't
- * include the firmware with this driver.
- *
- * However, should a legal-to-distribute firmware become available,
- * the driver developer would need only to obtain the firmware in the
- * form of a C header file.
- * Once that's done, the #undef below must be changed into a #define
- * for this driver to really use the firmware. Note that Rx/Tx
- * hardware TCP checksumming is not possible without the firmware.
- *
- * WANTED: legal firmware to include with this GPL'd driver.
- */
-#undef HAS_FIRMWARE
+#include "starfire_firmware.h"
/*
* The current frame processor firmware fails to checksum a fragment
* of length 1. If and when this is fixed, the #define below can be removed.
@@ -172,13 +168,7 @@ TODO: bugfixes (no bugs known as of right now)
/*
* Define this if using the driver with the zero-copy patch
*/
-#if defined(HAS_FIRMWARE) && defined(MAX_SKB_FRAGS)
#define ZEROCOPY
-#endif
-
-#ifdef HAS_FIRMWARE
-#include "starfire_firmware.h"
-#endif /* HAS_FIRMWARE */
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
#define VLAN_SUPPORT
@@ -202,11 +192,7 @@ static int mtu;
The Starfire has a 512 element hash table based on the Ethernet CRC. */
static int multicast_filter_limit = 512;
/* Whether to do TCP/UDP checksums in hardware */
-#ifdef HAS_FIRMWARE
static int enable_hw_cksum = 1;
-#else
-static int enable_hw_cksum = 0;
-#endif
#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
/*
@@ -291,43 +277,15 @@ static int full_duplex[MAX_UNITS] = {0, };
#define RX_DESC_ADDR_SIZE RxDescAddr32bit
#endif
-#ifdef MAX_SKB_FRAGS
#define skb_first_frag_len(skb) skb_headlen(skb)
#define skb_num_frags(skb) (skb_shinfo(skb)->nr_frags + 1)
-#else /* not MAX_SKB_FRAGS */
-#define skb_first_frag_len(skb) (skb->len)
-#define skb_num_frags(skb) 1
-#endif /* not MAX_SKB_FRAGS */
-
-/* 2.2.x compatibility code */
-#if LINUX_VERSION_CODE < 0x20300
-
-#include "starfire-kcomp22.h"
-
-#else /* LINUX_VERSION_CODE > 0x20300 */
-
-#include <linux/crc32.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-
-#include <linux/if_vlan.h>
-
-#define init_tx_timer(dev, func, timeout) \
- dev->tx_timeout = func; \
- dev->watchdog_timeo = timeout;
-#define kick_tx_timer(dev, func, timeout)
-
-#define netif_start_if(dev)
-#define netif_stop_if(dev)
-
-#define PCI_SLOT_NAME(pci_dev) pci_name(pci_dev)
-
-#endif /* LINUX_VERSION_CODE > 0x20300 */
#ifdef HAVE_NETDEV_POLL
#define init_poll(dev) \
+do { \
dev->poll = &netdev_poll; \
- dev->weight = max_interrupt_work;
+ dev->weight = max_interrupt_work; \
+} while (0)
#define netdev_rx(dev, ioaddr) \
do { \
u32 intr_enable; \
@@ -341,7 +299,7 @@ do { \
/* Paranoia check */ \
intr_enable = readl(ioaddr + IntrEnable); \
if (intr_enable & (IntrRxDone | IntrRxEmpty)) { \
- printk("%s: interrupt while in polling mode!\n", dev->name); \
+ printk(KERN_INFO "%s: interrupt while in polling mode!\n", dev->name); \
intr_enable &= ~(IntrRxDone | IntrRxEmpty); \
writel(intr_enable, ioaddr + IntrEnable); \
} \
@@ -371,6 +329,7 @@ KERN_INFO " (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELD
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver");
MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
module_param(max_interrupt_work, int, 0);
module_param(mtu, int, 0);
@@ -425,7 +384,7 @@ on the 32/64 bitness of the architecture), and relies on automatic
minimum-length padding. It does not use the completion queue
consumer index, but instead checks for non-zero status entries.
-For receive this driver uses type 0/1/2/3 receive descriptors. The driver
+For receive this driver uses type 2/3 receive descriptors. The driver
allocates full frame size skbuffs for the Rx ring buffers, so all frames
should fit in a single descriptor. The driver does not use the completion
queue consumer index, but instead checks for non-zero status entries.
@@ -476,7 +435,7 @@ IVc. Errata
*/
-
+
enum chip_capability_flags {CanHaveMII=1, };
@@ -670,7 +629,6 @@ struct full_rx_done_desc {
u32 timestamp;
};
/* XXX: this is ugly and I'm not sure it's worth the trouble -Ion */
-#ifdef HAS_FIRMWARE
#ifdef VLAN_SUPPORT
typedef struct full_rx_done_desc rx_done_desc;
#define RxComplType RxComplType3
@@ -678,15 +636,6 @@ typedef struct full_rx_done_desc rx_done_desc;
typedef struct csum_rx_done_desc rx_done_desc;
#define RxComplType RxComplType2
#endif /* not VLAN_SUPPORT */
-#else /* not HAS_FIRMWARE */
-#ifdef VLAN_SUPPORT
-typedef struct basic_rx_done_desc rx_done_desc;
-#define RxComplType RxComplType1
-#else /* not VLAN_SUPPORT */
-typedef struct short_rx_done_desc rx_done_desc;
-#define RxComplType RxComplType0
-#endif /* not VLAN_SUPPORT */
-#endif /* not HAS_FIRMWARE */
enum rx_done_bits {
RxOK=0x20000000, RxFIFOErr=0x10000000, RxBufQ2=0x08000000,
@@ -898,13 +847,10 @@ static int __devinit starfire_init_one(struct pci_dev *pdev,
/* enable MWI -- it vastly improves Rx performance on sparc64 */
pci_set_mwi(pdev);
-#ifdef MAX_SKB_FRAGS
- dev->features |= NETIF_F_SG;
-#endif /* MAX_SKB_FRAGS */
#ifdef ZEROCOPY
/* Starfire can do TCP/UDP checksumming */
if (enable_hw_cksum)
- dev->features |= NETIF_F_IP_CSUM;
+ dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
#endif /* ZEROCOPY */
#ifdef VLAN_SUPPORT
dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
@@ -1008,7 +954,8 @@ static int __devinit starfire_init_one(struct pci_dev *pdev,
/* The chip-specific entries in the device structure. */
dev->open = &netdev_open;
dev->hard_start_xmit = &start_tx;
- init_tx_timer(dev, tx_timeout, TX_TIMEOUT);
+ dev->tx_timeout = tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
init_poll(dev);
dev->stop = &netdev_close;
dev->get_stats = &get_stats;
@@ -1039,7 +986,7 @@ static int __devinit starfire_init_one(struct pci_dev *pdev,
if ((mdio_read(dev, phy, MII_BMCR) & BMCR_RESET) == 0)
break;
if (boguscnt == 0) {
- printk("%s: PHY reset never completed!\n", dev->name);
+ printk("%s: PHY#%d reset never completed!\n", dev->name, phy);
continue;
}
mii_status = mdio_read(dev, phy, MII_BMSR);
@@ -1110,6 +1057,7 @@ static int netdev_open(struct net_device *dev)
size_t tx_done_q_size, rx_done_q_size, tx_ring_size, rx_ring_size;
/* Do we ever need to reset the chip??? */
+
retval = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev);
if (retval)
return retval;
@@ -1211,7 +1159,6 @@ static int netdev_open(struct net_device *dev)
writel(np->intr_timer_ctrl, ioaddr + IntrTimerCtrl);
- netif_start_if(dev);
netif_start_queue(dev);
if (debug > 1)
@@ -1238,13 +1185,11 @@ static int netdev_open(struct net_device *dev)
writel(ETH_P_8021Q, ioaddr + VlanType);
#endif /* VLAN_SUPPORT */
-#ifdef HAS_FIRMWARE
/* Load Rx/Tx firmware into the frame processors */
for (i = 0; i < FIRMWARE_RX_SIZE * 2; i++)
writel(firmware_rx[i], ioaddr + RxGfpMem + i * 4);
for (i = 0; i < FIRMWARE_TX_SIZE * 2; i++)
writel(firmware_tx[i], ioaddr + TxGfpMem + i * 4);
-#endif /* HAS_FIRMWARE */
if (enable_hw_cksum)
/* Enable the Rx and Tx units, and the Rx/Tx frame processors. */
writel(TxEnable|TxGFPEnable|RxEnable|RxGFPEnable, ioaddr + GenCtrl);
@@ -1378,8 +1323,6 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev)
u32 status;
int i;
- kick_tx_timer(dev, tx_timeout, TX_TIMEOUT);
-
/*
* be cautious here, wrapping the queue has weird semantics
* and we may not have enough slots even when it seems we do.
@@ -1404,7 +1347,7 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev)
}
if (has_bad_length)
- skb_checksum_help(skb);
+ skb_checksum_help(skb, 0);
}
#endif /* ZEROCOPY && HAS_BROKEN_FIRMWARE */
@@ -1433,12 +1376,10 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev)
np->tx_info[entry].mapping =
pci_map_single(np->pci_dev, skb->data, skb_first_frag_len(skb), PCI_DMA_TODEVICE);
} else {
-#ifdef MAX_SKB_FRAGS
skb_frag_t *this_frag = &skb_shinfo(skb)->frags[i - 1];
status |= this_frag->size;
np->tx_info[entry].mapping =
pci_map_single(np->pci_dev, page_address(this_frag->page) + this_frag->page_offset, this_frag->size, PCI_DMA_TODEVICE);
-#endif /* MAX_SKB_FRAGS */
}
np->tx_ring[entry].addr = cpu_to_dma(np->tx_info[entry].mapping);
@@ -1531,7 +1472,6 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs
np->tx_info[entry].mapping = 0;
np->dirty_tx += np->tx_info[entry].used_slots;
entry = (entry + np->tx_info[entry].used_slots) % TX_RING_SIZE;
-#ifdef MAX_SKB_FRAGS
{
int i;
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
@@ -1543,7 +1483,7 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs
entry++;
}
}
-#endif /* MAX_SKB_FRAGS */
+
dev_kfree_skb_irq(skb);
}
np->tx_done_q[np->tx_done].status = 0;
@@ -1603,7 +1543,7 @@ static int __netdev_rx(struct net_device *dev, int *quota)
if (debug > 4)
printk(KERN_DEBUG " netdev_rx() status of %d was %#8.8x.\n", np->rx_done, desc_status);
if (!(desc_status & RxOK)) {
- /* There was a error. */
+ /* There was an error. */
if (debug > 2)
printk(KERN_DEBUG " netdev_rx() Rx error was %#8.8x.\n", desc_status);
np->stats.rx_errors++;
@@ -1656,11 +1596,10 @@ static int __netdev_rx(struct net_device *dev, int *quota)
#endif
skb->protocol = eth_type_trans(skb, dev);
-#if defined(HAS_FIRMWARE) || defined(VLAN_SUPPORT)
+#ifdef VLAN_SUPPORT
if (debug > 4)
printk(KERN_DEBUG " netdev_rx() status2 of %d was %#4.4x.\n", np->rx_done, le16_to_cpu(desc->status2));
#endif
-#ifdef HAS_FIRMWARE
if (le16_to_cpu(desc->status2) & 0x0100) {
skb->ip_summed = CHECKSUM_UNNECESSARY;
np->stats.rx_compressed++;
@@ -1679,7 +1618,6 @@ static int __netdev_rx(struct net_device *dev, int *quota)
skb->csum = le16_to_cpu(desc->csum);
printk(KERN_DEBUG "%s: checksum_hw, status2 = %#x\n", dev->name, le16_to_cpu(desc->status2));
}
-#endif /* HAS_FIRMWARE */
#ifdef VLAN_SUPPORT
if (np->vlgrp && le16_to_cpu(desc->status2) & 0x0200) {
if (debug > 4)
@@ -1900,9 +1838,6 @@ static struct net_device_stats *get_stats(struct net_device *dev)
}
-/* Chips may use the upper or lower CRC bits, and may reverse and/or invert
- them. Select the endian-ness that results in minimal calculations.
-*/
static void set_rx_mode(struct net_device *dev)
{
struct netdev_private *np = netdev_priv(dev);
@@ -1969,6 +1904,8 @@ static void set_rx_mode(struct net_device *dev)
memset(mc_filter, 0, sizeof(mc_filter));
for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
i++, mclist = mclist->next) {
+ /* The chip uses the upper 9 CRC bits
+ as index into the hash table */
int bit_nr = ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 23;
__u32 *fptr = (__u32 *) &mc_filter[(bit_nr >> 4) & ~1];
@@ -2001,7 +1938,7 @@ static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
struct netdev_private *np = netdev_priv(dev);
strcpy(info->driver, DRV_NAME);
strcpy(info->version, DRV_VERSION);
- strcpy(info->bus_info, PCI_SLOT_NAME(np->pci_dev));
+ strcpy(info->bus_info, pci_name(np->pci_dev));
}
static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
@@ -2083,7 +2020,6 @@ static int netdev_close(struct net_device *dev)
int i;
netif_stop_queue(dev);
- netif_stop_if(dev);
if (debug > 1) {
printk(KERN_DEBUG "%s: Shutting down ethercard, Intr status %#8.8x.\n",
@@ -2184,7 +2120,13 @@ static int __init starfire_init (void)
/* when a module, this is printed whether or not devices are found in probe */
#ifdef MODULE
printk(version);
+#ifdef HAVE_NETDEV_POLL
+ printk(KERN_INFO DRV_NAME ": polling (NAPI) enabled\n");
+#else
+ printk(KERN_INFO DRV_NAME ": polling (NAPI) disabled\n");
#endif
+#endif
+
#ifndef ADDR_64BITS
/* we can do this test only at run-time... sigh */
if (sizeof(dma_addr_t) == sizeof(u64)) {
@@ -2192,10 +2134,6 @@ static int __init starfire_init (void)
return -ENODEV;
}
#endif /* not ADDR_64BITS */
-#ifndef HAS_FIRMWARE
- /* unconditionally disable hw cksums if firmware is not present */
- enable_hw_cksum = 0;
-#endif /* not HAS_FIRMWARE */
return pci_module_init (&starfire_driver);
}
diff --git a/drivers/net/starfire_firmware.h b/drivers/net/starfire_firmware.h
new file mode 100644
index 00000000000..0a668528955
--- /dev/null
+++ b/drivers/net/starfire_firmware.h
@@ -0,0 +1,346 @@
+/*
+ * Copyright 2003 Adaptec, Inc.
+ *
+ * Please read the following license before using the Adaptec Software
+ * ("Program"). If you do not agree to the license terms, do not use the
+ * Program:
+ *
+ * You agree to be bound by version 2 of the General Public License ("GPL")
+ * dated June 1991, which can be found at http://www.fsf.org/licenses/gpl.html.
+ * If the link is broken, write to Free Software Foundation, 59 Temple Place,
+ * Boston, Massachusetts 02111-1307.
+ *
+ * BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE IT IS LICENSED "AS IS" AND
+ * THERE IS NO WARRANTY FOR THE PROGRAM, INCLUDING BUT NOT LIMITED TO THE
+ * IMPLIED WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * (TO THE EXTENT PERMITTED BY APPLICABLE LAW). USE OF THE PROGRAM IS AT YOUR
+ * OWN RISK. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE LIABLE TO YOU FOR
+ * DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
+ * ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM.
+ *
+ */
+
+static const u32 firmware_rx[] = {
+ 0x010003dc, 0x00000000,
+ 0x04000421, 0x00000086,
+ 0x80000015, 0x0000180e,
+ 0x81000015, 0x00006664,
+ 0x1a0040ab, 0x00000b06,
+ 0x14200011, 0x00000000,
+ 0x14204022, 0x0000aaaa,
+ 0x14204022, 0x00000300,
+ 0x14204022, 0x00000000,
+ 0x1a0040ab, 0x00000b14,
+ 0x14200011, 0x00000000,
+ 0x83000015, 0x00000002,
+ 0x04000021, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x04000421, 0x00000087,
+ 0x00000010, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00008015, 0x00000000,
+ 0x0000003e, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x82000015, 0x00004000,
+ 0x009e8050, 0x00000000,
+ 0x03008015, 0x00000000,
+ 0x86008015, 0x00000000,
+ 0x82000015, 0x00008000,
+ 0x0100001c, 0x00000000,
+ 0x000050a0, 0x0000010c,
+ 0x4e20d011, 0x00006008,
+ 0x1420d012, 0x00004008,
+ 0x0000f090, 0x00007000,
+ 0x0000c8b0, 0x00003000,
+ 0x00004040, 0x00000000,
+ 0x00108015, 0x00000000,
+ 0x00a2c150, 0x00004000,
+ 0x00a400b0, 0x00000014,
+ 0x00000020, 0x00000000,
+ 0x2500400d, 0x00002525,
+ 0x00047220, 0x00003100,
+ 0x00934070, 0x00000000,
+ 0x00000020, 0x00000000,
+ 0x00924460, 0x00000184,
+ 0x2b20c011, 0x00000000,
+ 0x0000c420, 0x00000540,
+ 0x36014018, 0x0000422d,
+ 0x14200011, 0x00000000,
+ 0x00924460, 0x00000183,
+ 0x3200001f, 0x00000034,
+ 0x02ac0015, 0x00000002,
+ 0x00a60110, 0x00000008,
+ 0x42200011, 0x00000000,
+ 0x00924060, 0x00000103,
+ 0x0000001e, 0x00000000,
+ 0x00000020, 0x00000100,
+ 0x0000001e, 0x00000000,
+ 0x00924460, 0x00000086,
+ 0x00004080, 0x00000000,
+ 0x0092c070, 0x00000000,
+ 0x00924060, 0x00000100,
+ 0x0000c890, 0x00005000,
+ 0x00a6c110, 0x00000000,
+ 0x00b0c090, 0x00000012,
+ 0x021c0015, 0x00000000,
+ 0x3200001f, 0x00000034,
+ 0x00924460, 0x00000510,
+ 0x44210011, 0x00000000,
+ 0x42000011, 0x00000000,
+ 0x83000015, 0x00000040,
+ 0x00924460, 0x00000508,
+ 0x45014018, 0x00004545,
+ 0x00808050, 0x00000000,
+ 0x62208012, 0x00000000,
+ 0x82000015, 0x00000800,
+ 0x15200011, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x80000015, 0x0000eea4,
+ 0x81000015, 0x0000005f,
+ 0x00000060, 0x00000000,
+ 0x00004120, 0x00000000,
+ 0x00004a00, 0x00004000,
+ 0x00924460, 0x00000190,
+ 0x5601401a, 0x00005956,
+ 0x14000011, 0x00000000,
+ 0x00934050, 0x00000018,
+ 0x00930050, 0x00000018,
+ 0x3601403a, 0x0000002d,
+ 0x000643a9, 0x00000000,
+ 0x0000c420, 0x00000140,
+ 0x5601401a, 0x00005956,
+ 0x14000011, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x000642a9, 0x00000000,
+ 0x00024420, 0x00000183,
+ 0x5601401a, 0x00005956,
+ 0x82000015, 0x00002000,
+ 0x15200011, 0x00000000,
+ 0x82000015, 0x00000010,
+ 0x15200011, 0x00000000,
+ 0x82000015, 0x00000010,
+ 0x15200011, 0x00000000,
+}; /* 104 Rx instructions */
+#define FIRMWARE_RX_SIZE 104
+
+static const u32 firmware_tx[] = {
+ 0x010003dc, 0x00000000,
+ 0x04000421, 0x00000086,
+ 0x80000015, 0x0000180e,
+ 0x81000015, 0x00006664,
+ 0x1a0040ab, 0x00000b06,
+ 0x14200011, 0x00000000,
+ 0x14204022, 0x0000aaaa,
+ 0x14204022, 0x00000300,
+ 0x14204022, 0x00000000,
+ 0x1a0040ab, 0x00000b14,
+ 0x14200011, 0x00000000,
+ 0x83000015, 0x00000002,
+ 0x04000021, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x04000421, 0x00000087,
+ 0x00000010, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00008015, 0x00000000,
+ 0x0000003e, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x82000015, 0x00004000,
+ 0x009e8050, 0x00000000,
+ 0x03008015, 0x00000000,
+ 0x86008015, 0x00000000,
+ 0x82000015, 0x00008000,
+ 0x0100001c, 0x00000000,
+ 0x000050a0, 0x0000010c,
+ 0x4e20d011, 0x00006008,
+ 0x1420d012, 0x00004008,
+ 0x0000f090, 0x00007000,
+ 0x0000c8b0, 0x00003000,
+ 0x00004040, 0x00000000,
+ 0x00108015, 0x00000000,
+ 0x00a2c150, 0x00004000,
+ 0x00a400b0, 0x00000014,
+ 0x00000020, 0x00000000,
+ 0x2500400d, 0x00002525,
+ 0x00047220, 0x00003100,
+ 0x00934070, 0x00000000,
+ 0x00000020, 0x00000000,
+ 0x00924460, 0x00000184,
+ 0x2b20c011, 0x00000000,
+ 0x0000c420, 0x00000540,
+ 0x36014018, 0x0000422d,
+ 0x14200011, 0x00000000,
+ 0x00924460, 0x00000183,
+ 0x3200001f, 0x00000034,
+ 0x02ac0015, 0x00000002,
+ 0x00a60110, 0x00000008,
+ 0x42200011, 0x00000000,
+ 0x00924060, 0x00000103,
+ 0x0000001e, 0x00000000,
+ 0x00000020, 0x00000100,
+ 0x0000001e, 0x00000000,
+ 0x00924460, 0x00000086,
+ 0x00004080, 0x00000000,
+ 0x0092c070, 0x00000000,
+ 0x00924060, 0x00000100,
+ 0x0000c890, 0x00005000,
+ 0x00a6c110, 0x00000000,
+ 0x00b0c090, 0x00000012,
+ 0x021c0015, 0x00000000,
+ 0x3200001f, 0x00000034,
+ 0x00924460, 0x00000510,
+ 0x44210011, 0x00000000,
+ 0x42000011, 0x00000000,
+ 0x83000015, 0x00000040,
+ 0x00924460, 0x00000508,
+ 0x45014018, 0x00004545,
+ 0x00808050, 0x00000000,
+ 0x62208012, 0x00000000,
+ 0x82000015, 0x00000800,
+ 0x15200011, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x80000015, 0x0000eea4,
+ 0x81000015, 0x0000005f,
+ 0x00000060, 0x00000000,
+ 0x00004120, 0x00000000,
+ 0x00004a00, 0x00004000,
+ 0x00924460, 0x00000190,
+ 0x5601401a, 0x00005956,
+ 0x14000011, 0x00000000,
+ 0x00934050, 0x00000018,
+ 0x00930050, 0x00000018,
+ 0x3601403a, 0x0000002d,
+ 0x000643a9, 0x00000000,
+ 0x0000c420, 0x00000140,
+ 0x5601401a, 0x00005956,
+ 0x14000011, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x000642a9, 0x00000000,
+ 0x00024420, 0x00000183,
+ 0x5601401a, 0x00005956,
+ 0x82000015, 0x00002000,
+ 0x15200011, 0x00000000,
+ 0x82000015, 0x00000010,
+ 0x15200011, 0x00000000,
+ 0x82000015, 0x00000010,
+ 0x15200011, 0x00000000,
+}; /* 104 Tx instructions */
+#define FIRMWARE_TX_SIZE 104
+#if 0
+static const u32 firmware_wol[] = {
+ 0x010003dc, 0x00000000,
+ 0x19000421, 0x00000087,
+ 0x80000015, 0x00001a1a,
+ 0x81000015, 0x00001a1a,
+ 0x1a0040ab, 0x00000b06,
+ 0x15200011, 0x00000000,
+ 0x15204022, 0x0000aaaa,
+ 0x15204022, 0x00000300,
+ 0x15204022, 0x00000000,
+ 0x1a0040ab, 0x00000b15,
+ 0x15200011, 0x00000000,
+ 0x83000015, 0x00000002,
+ 0x04000021, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x04000421, 0x00000087,
+ 0x00000010, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00008015, 0x00000000,
+ 0x0000003e, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x82000015, 0x00004000,
+ 0x82000015, 0x00008000,
+ 0x0000000c, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00004080, 0x00000100,
+ 0x1f20c011, 0x00001122,
+ 0x2720f011, 0x00003011,
+ 0x19200071, 0x00000000,
+ 0x1a200051, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x1d2040a4, 0x00003344,
+ 0x1d2040a2, 0x00005566,
+ 0x000040a0, 0x00000100,
+ 0x00108050, 0x00000001,
+ 0x1a208012, 0x00000006,
+ 0x82000015, 0x00008080,
+ 0x010003dc, 0x00000000,
+ 0x1d2040a4, 0x00002233,
+ 0x1d2040a4, 0x00004455,
+ 0x2d208011, 0x00000005,
+ 0x1d2040a4, 0x00006611,
+ 0x00108050, 0x00000001,
+ 0x27200011, 0x00000000,
+ 0x1d2050a4, 0x00006600,
+ 0x82000015, 0x00008080,
+ 0x010003dc, 0x00000000,
+ 0x00000050, 0x00000000,
+ 0x1b200031, 0x00000000,
+ 0x0000001e, 0x00000000,
+ 0x0000001e, 0x00000000,
+ 0x0000001e, 0x00000000,
+ 0x0000001e, 0x00000000,
+ 0x00924460, 0x00000086,
+ 0x00004080, 0x00000000,
+ 0x0092c070, 0x00000000,
+ 0x00924060, 0x00000100,
+ 0x0000c890, 0x00005000,
+ 0x00a6c110, 0x00000000,
+ 0x00b0c090, 0x00000012,
+ 0x021c0015, 0x00000000,
+ 0x3200001f, 0x00000034,
+ 0x00924460, 0x00000510,
+ 0x44210011, 0x00000000,
+ 0x42000011, 0x00000000,
+ 0x83000015, 0x00000040,
+ 0x00924460, 0x00000508,
+ 0x476a0012, 0x00000100,
+ 0x83000015, 0x00000008,
+ 0x16200011, 0x00000000,
+ 0x001e8050, 0x00000000,
+ 0x001e8050, 0x00000000,
+ 0x00808050, 0x00000000,
+ 0x03008015, 0x00000000,
+ 0x62208012, 0x00000000,
+ 0x82000015, 0x00000800,
+ 0x16200011, 0x00000000,
+ 0x80000015, 0x0000eea4,
+ 0x81000015, 0x0000005f,
+ 0x00000020, 0x00000000,
+ 0x00004120, 0x00000000,
+ 0x00004a00, 0x00004000,
+ 0x00924460, 0x00000190,
+ 0x5c01401a, 0x0000595c,
+ 0x15000011, 0x00000000,
+ 0x00934050, 0x00000018,
+ 0x00930050, 0x00000018,
+ 0x3601403a, 0x0000002d,
+ 0x00064029, 0x00000000,
+ 0x0000c420, 0x00000140,
+ 0x5c01401a, 0x0000595c,
+ 0x15000011, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00000010, 0x00000000,
+ 0x00064029, 0x00000000,
+ 0x00024420, 0x00000183,
+ 0x5c01401a, 0x0000595c,
+ 0x82000015, 0x00002000,
+ 0x16200011, 0x00000000,
+ 0x82000015, 0x00000010,
+ 0x16200011, 0x00000000,
+ 0x82000015, 0x00000010,
+ 0x16200011, 0x00000000,
+}; /* 104 WoL instructions */
+#define FIRMWARE_WOL_SIZE 104
+#endif
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 9680a308c62..cf31c062985 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -2819,7 +2819,7 @@ void TLan_PhyMonitor( struct net_device *dev )
if (priv->link) {
priv->link = 0;
printk(KERN_DEBUG "TLAN: %s has lost link\n", dev->name);
- dev->flags &= ~IFF_RUNNING;
+ netif_carrier_off(dev);
TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT );
return;
}
@@ -2829,7 +2829,7 @@ void TLan_PhyMonitor( struct net_device *dev )
if ((phy_status & MII_GS_LINK) && !priv->link) {
priv->link = 1;
printk(KERN_DEBUG "TLAN: %s has reestablished link\n", dev->name);
- dev->flags |= IFF_RUNNING;
+ netif_carrier_on(dev);
}
/* Setup a new monitor */
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index c098863bdd9..3873917a9c2 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -888,11 +888,6 @@ static int tok_open(struct net_device *dev)
ti->sap_status = CLOSED; /* CLOSED or OPEN */
ti->open_failure = NO; /* NO or YES */
ti->open_mode = MANUAL; /* MANUAL or AUTOMATIC */
- /* 12/2000 not typical Linux, but we can use RUNNING to let us know when
- the network has crapped out or cables are disconnected. Useful because
- the IFF_UP flag stays up the whole time, until ifconfig tr0 down.
- */
- dev->flags &= ~IFF_RUNNING;
ti->sram_phys &= ~1; /* to reverse what we do in tok_close */
/* init the spinlock */
@@ -1242,7 +1237,7 @@ irqreturn_t tok_interrupt(int irq, void *dev_id, struct pt_regs *regs)
ti->open_status = CLOSED;
ti->sap_status = CLOSED;
ti->open_mode = AUTOMATIC;
- dev->flags &= ~IFF_RUNNING;
+ netif_carrier_off(dev);
netif_stop_queue(dev);
ti->open_action = RESTART;
outb(0, dev->base_addr + ADAPTRESET);
@@ -1323,7 +1318,7 @@ irqreturn_t tok_interrupt(int irq, void *dev_id, struct pt_regs *regs)
break;
}
netif_wake_queue(dev);
- dev->flags |= IFF_RUNNING;/*BMS 12/2000*/
+ netif_carrier_on(dev);
break;
case DIR_INTERRUPT:
case DIR_MOD_OPEN_PARAMS:
@@ -1427,7 +1422,7 @@ irqreturn_t tok_interrupt(int irq, void *dev_id, struct pt_regs *regs)
ring_status);
if(ring_status& (REMOVE_RECV|AUTO_REMOVAL|LOBE_FAULT)){
netif_stop_queue(dev);
- dev->flags &= ~IFF_RUNNING;/*not typical Linux*/
+ netif_carrier_off(dev);
DPRINTK("Remove received, or Auto-removal error"
", or Lobe fault\n");
DPRINTK("We'll try to reopen the closed adapter"
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 7f450b51a6c..a5d6891c9d4 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -2,7 +2,7 @@
* Generic HDLC support routines for Linux
* Frame Relay support
*
- * Copyright (C) 1999 - 2003 Krzysztof Halasa <khc@pm.waw.pl>
+ * Copyright (C) 1999 - 2005 Krzysztof Halasa <khc@pm.waw.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
@@ -27,6 +27,10 @@
active = open and "link reliable"
exist = new = not used
+ CCITT LMI: ITU-T Q.933 Annex A
+ ANSI LMI: ANSI T1.617 Annex D
+ CISCO LMI: the original, aka "Gang of Four" LMI
+
*/
#include <linux/module.h>
@@ -49,45 +53,41 @@
#undef DEBUG_ECN
#undef DEBUG_LINK
-#define MAXLEN_LMISTAT 20 /* max size of status enquiry frame */
-
-#define PVC_STATE_NEW 0x01
-#define PVC_STATE_ACTIVE 0x02
-#define PVC_STATE_FECN 0x08 /* FECN condition */
-#define PVC_STATE_BECN 0x10 /* BECN condition */
-
-
-#define FR_UI 0x03
-#define FR_PAD 0x00
-
-#define NLPID_IP 0xCC
-#define NLPID_IPV6 0x8E
-#define NLPID_SNAP 0x80
-#define NLPID_PAD 0x00
-#define NLPID_Q933 0x08
-
-
-#define LMI_DLCI 0 /* LMI DLCI */
-#define LMI_PROTO 0x08
-#define LMI_CALLREF 0x00 /* Call Reference */
-#define LMI_ANSI_LOCKSHIFT 0x95 /* ANSI lockshift */
-#define LMI_REPTYPE 1 /* report type */
-#define LMI_CCITT_REPTYPE 0x51
-#define LMI_ALIVE 3 /* keep alive */
-#define LMI_CCITT_ALIVE 0x53
-#define LMI_PVCSTAT 7 /* pvc status */
-#define LMI_CCITT_PVCSTAT 0x57
-#define LMI_FULLREP 0 /* full report */
-#define LMI_INTEGRITY 1 /* link integrity report */
-#define LMI_SINGLE 2 /* single pvc report */
+#define FR_UI 0x03
+#define FR_PAD 0x00
+
+#define NLPID_IP 0xCC
+#define NLPID_IPV6 0x8E
+#define NLPID_SNAP 0x80
+#define NLPID_PAD 0x00
+#define NLPID_CCITT_ANSI_LMI 0x08
+#define NLPID_CISCO_LMI 0x09
+
+
+#define LMI_CCITT_ANSI_DLCI 0 /* LMI DLCI */
+#define LMI_CISCO_DLCI 1023
+
+#define LMI_CALLREF 0x00 /* Call Reference */
+#define LMI_ANSI_LOCKSHIFT 0x95 /* ANSI locking shift */
+#define LMI_ANSI_CISCO_REPTYPE 0x01 /* report type */
+#define LMI_CCITT_REPTYPE 0x51
+#define LMI_ANSI_CISCO_ALIVE 0x03 /* keep alive */
+#define LMI_CCITT_ALIVE 0x53
+#define LMI_ANSI_CISCO_PVCSTAT 0x07 /* PVC status */
+#define LMI_CCITT_PVCSTAT 0x57
+
+#define LMI_FULLREP 0x00 /* full report */
+#define LMI_INTEGRITY 0x01 /* link integrity report */
+#define LMI_SINGLE 0x02 /* single PVC report */
+
#define LMI_STATUS_ENQUIRY 0x75
#define LMI_STATUS 0x7D /* reply */
#define LMI_REPT_LEN 1 /* report type element length */
#define LMI_INTEG_LEN 2 /* link integrity element length */
-#define LMI_LENGTH 13 /* standard LMI frame length */
-#define LMI_ANSI_LENGTH 14
+#define LMI_CCITT_CISCO_LENGTH 13 /* LMI frame lengths */
+#define LMI_ANSI_LENGTH 14
typedef struct {
@@ -223,51 +223,34 @@ static inline struct net_device** get_dev_p(pvc_device *pvc, int type)
}
-static inline u16 status_to_dlci(u8 *status, int *active, int *new)
-{
- *new = (status[2] & 0x08) ? 1 : 0;
- *active = (status[2] & 0x02) ? 1 : 0;
-
- return ((status[0] & 0x3F) << 4) | ((status[1] & 0x78) >> 3);
-}
-
-
-static inline void dlci_to_status(u16 dlci, u8 *status, int active, int new)
-{
- status[0] = (dlci >> 4) & 0x3F;
- status[1] = ((dlci << 3) & 0x78) | 0x80;
- status[2] = 0x80;
-
- if (new)
- status[2] |= 0x08;
- else if (active)
- status[2] |= 0x02;
-}
-
-
-
static int fr_hard_header(struct sk_buff **skb_p, u16 dlci)
{
u16 head_len;
struct sk_buff *skb = *skb_p;
switch (skb->protocol) {
- case __constant_ntohs(ETH_P_IP):
+ case __constant_ntohs(NLPID_CCITT_ANSI_LMI):
head_len = 4;
skb_push(skb, head_len);
- skb->data[3] = NLPID_IP;
+ skb->data[3] = NLPID_CCITT_ANSI_LMI;
break;
- case __constant_ntohs(ETH_P_IPV6):
+ case __constant_ntohs(NLPID_CISCO_LMI):
head_len = 4;
skb_push(skb, head_len);
- skb->data[3] = NLPID_IPV6;
+ skb->data[3] = NLPID_CISCO_LMI;
break;
- case __constant_ntohs(LMI_PROTO):
+ case __constant_ntohs(ETH_P_IP):
+ head_len = 4;
+ skb_push(skb, head_len);
+ skb->data[3] = NLPID_IP;
+ break;
+
+ case __constant_ntohs(ETH_P_IPV6):
head_len = 4;
skb_push(skb, head_len);
- skb->data[3] = LMI_PROTO;
+ skb->data[3] = NLPID_IPV6;
break;
case __constant_ntohs(ETH_P_802_3):
@@ -461,13 +444,14 @@ static void fr_lmi_send(struct net_device *dev, int fullrep)
hdlc_device *hdlc = dev_to_hdlc(dev);
struct sk_buff *skb;
pvc_device *pvc = hdlc->state.fr.first_pvc;
- int len = (hdlc->state.fr.settings.lmi == LMI_ANSI) ? LMI_ANSI_LENGTH
- : LMI_LENGTH;
- int stat_len = 3;
+ int lmi = hdlc->state.fr.settings.lmi;
+ int dce = hdlc->state.fr.settings.dce;
+ int len = lmi == LMI_ANSI ? LMI_ANSI_LENGTH : LMI_CCITT_CISCO_LENGTH;
+ int stat_len = (lmi == LMI_CISCO) ? 6 : 3;
u8 *data;
int i = 0;
- if (hdlc->state.fr.settings.dce && fullrep) {
+ if (dce && fullrep) {
len += hdlc->state.fr.dce_pvc_count * (2 + stat_len);
if (len > HDLC_MAX_MRU) {
printk(KERN_WARNING "%s: Too many PVCs while sending "
@@ -484,29 +468,31 @@ static void fr_lmi_send(struct net_device *dev, int fullrep)
}
memset(skb->data, 0, len);
skb_reserve(skb, 4);
- skb->protocol = __constant_htons(LMI_PROTO);
- fr_hard_header(&skb, LMI_DLCI);
+ if (lmi == LMI_CISCO) {
+ skb->protocol = __constant_htons(NLPID_CISCO_LMI);
+ fr_hard_header(&skb, LMI_CISCO_DLCI);
+ } else {
+ skb->protocol = __constant_htons(NLPID_CCITT_ANSI_LMI);
+ fr_hard_header(&skb, LMI_CCITT_ANSI_DLCI);
+ }
data = skb->tail;
data[i++] = LMI_CALLREF;
- data[i++] = hdlc->state.fr.settings.dce
- ? LMI_STATUS : LMI_STATUS_ENQUIRY;
- if (hdlc->state.fr.settings.lmi == LMI_ANSI)
+ data[i++] = dce ? LMI_STATUS : LMI_STATUS_ENQUIRY;
+ if (lmi == LMI_ANSI)
data[i++] = LMI_ANSI_LOCKSHIFT;
- data[i++] = (hdlc->state.fr.settings.lmi == LMI_CCITT)
- ? LMI_CCITT_REPTYPE : LMI_REPTYPE;
+ data[i++] = lmi == LMI_CCITT ? LMI_CCITT_REPTYPE :
+ LMI_ANSI_CISCO_REPTYPE;
data[i++] = LMI_REPT_LEN;
data[i++] = fullrep ? LMI_FULLREP : LMI_INTEGRITY;
-
- data[i++] = (hdlc->state.fr.settings.lmi == LMI_CCITT)
- ? LMI_CCITT_ALIVE : LMI_ALIVE;
+ data[i++] = lmi == LMI_CCITT ? LMI_CCITT_ALIVE : LMI_ANSI_CISCO_ALIVE;
data[i++] = LMI_INTEG_LEN;
data[i++] = hdlc->state.fr.txseq =fr_lmi_nextseq(hdlc->state.fr.txseq);
data[i++] = hdlc->state.fr.rxseq;
- if (hdlc->state.fr.settings.dce && fullrep) {
+ if (dce && fullrep) {
while (pvc) {
- data[i++] = (hdlc->state.fr.settings.lmi == LMI_CCITT)
- ? LMI_CCITT_PVCSTAT : LMI_PVCSTAT;
+ data[i++] = lmi == LMI_CCITT ? LMI_CCITT_PVCSTAT :
+ LMI_ANSI_CISCO_PVCSTAT;
data[i++] = stat_len;
/* LMI start/restart */
@@ -523,8 +509,20 @@ static void fr_lmi_send(struct net_device *dev, int fullrep)
fr_log_dlci_active(pvc);
}
- dlci_to_status(pvc->dlci, data + i,
- pvc->state.active, pvc->state.new);
+ if (lmi == LMI_CISCO) {
+ data[i] = pvc->dlci >> 8;
+ data[i + 1] = pvc->dlci & 0xFF;
+ } else {
+ data[i] = (pvc->dlci >> 4) & 0x3F;
+ data[i + 1] = ((pvc->dlci << 3) & 0x78) | 0x80;
+ data[i + 2] = 0x80;
+ }
+
+ if (pvc->state.new)
+ data[i + 2] |= 0x08;
+ else if (pvc->state.active)
+ data[i + 2] |= 0x02;
+
i += stat_len;
pvc = pvc->next;
}
@@ -569,6 +567,8 @@ static void fr_set_link_state(int reliable, struct net_device *dev)
pvc_carrier(0, pvc);
pvc->state.exist = pvc->state.active = 0;
pvc->state.new = 0;
+ if (!hdlc->state.fr.settings.dce)
+ pvc->state.bandwidth = 0;
pvc = pvc->next;
}
}
@@ -583,11 +583,12 @@ static void fr_timer(unsigned long arg)
int i, cnt = 0, reliable;
u32 list;
- if (hdlc->state.fr.settings.dce)
+ if (hdlc->state.fr.settings.dce) {
reliable = hdlc->state.fr.request &&
time_before(jiffies, hdlc->state.fr.last_poll +
hdlc->state.fr.settings.t392 * HZ);
- else {
+ hdlc->state.fr.request = 0;
+ } else {
hdlc->state.fr.last_errors <<= 1; /* Shift the list */
if (hdlc->state.fr.request) {
if (hdlc->state.fr.reliable)
@@ -634,65 +635,88 @@ static void fr_timer(unsigned long arg)
static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
- int stat_len;
pvc_device *pvc;
- int reptype = -1, error, no_ram;
u8 rxseq, txseq;
- int i;
+ int lmi = hdlc->state.fr.settings.lmi;
+ int dce = hdlc->state.fr.settings.dce;
+ int stat_len = (lmi == LMI_CISCO) ? 6 : 3, reptype, error, no_ram, i;
- if (skb->len < ((hdlc->state.fr.settings.lmi == LMI_ANSI)
- ? LMI_ANSI_LENGTH : LMI_LENGTH)) {
+ if (skb->len < (lmi == LMI_ANSI ? LMI_ANSI_LENGTH :
+ LMI_CCITT_CISCO_LENGTH)) {
printk(KERN_INFO "%s: Short LMI frame\n", dev->name);
return 1;
}
- if (skb->data[5] != (!hdlc->state.fr.settings.dce ?
- LMI_STATUS : LMI_STATUS_ENQUIRY)) {
- printk(KERN_INFO "%s: LMI msgtype=%x, Not LMI status %s\n",
- dev->name, skb->data[2],
- hdlc->state.fr.settings.dce ? "enquiry" : "reply");
+ if (skb->data[3] != (lmi == LMI_CISCO ? NLPID_CISCO_LMI :
+ NLPID_CCITT_ANSI_LMI)) {
+ printk(KERN_INFO "%s: Received non-LMI frame with LMI"
+ " DLCI\n", dev->name);
+ return 1;
+ }
+
+ if (skb->data[4] != LMI_CALLREF) {
+ printk(KERN_INFO "%s: Invalid LMI Call reference (0x%02X)\n",
+ dev->name, skb->data[4]);
+ return 1;
+ }
+
+ if (skb->data[5] != (dce ? LMI_STATUS_ENQUIRY : LMI_STATUS)) {
+ printk(KERN_INFO "%s: Invalid LMI Message type (0x%02X)\n",
+ dev->name, skb->data[5]);
return 1;
}
- i = (hdlc->state.fr.settings.lmi == LMI_ANSI) ? 7 : 6;
+ if (lmi == LMI_ANSI) {
+ if (skb->data[6] != LMI_ANSI_LOCKSHIFT) {
+ printk(KERN_INFO "%s: Not ANSI locking shift in LMI"
+ " message (0x%02X)\n", dev->name, skb->data[6]);
+ return 1;
+ }
+ i = 7;
+ } else
+ i = 6;
- if (skb->data[i] !=
- ((hdlc->state.fr.settings.lmi == LMI_CCITT)
- ? LMI_CCITT_REPTYPE : LMI_REPTYPE)) {
- printk(KERN_INFO "%s: Not a report type=%x\n",
+ if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_REPTYPE :
+ LMI_ANSI_CISCO_REPTYPE)) {
+ printk(KERN_INFO "%s: Not an LMI Report type IE (0x%02X)\n",
dev->name, skb->data[i]);
return 1;
}
- i++;
- i++; /* Skip length field */
+ if (skb->data[++i] != LMI_REPT_LEN) {
+ printk(KERN_INFO "%s: Invalid LMI Report type IE length"
+ " (%u)\n", dev->name, skb->data[i]);
+ return 1;
+ }
- reptype = skb->data[i++];
+ reptype = skb->data[++i];
+ if (reptype != LMI_INTEGRITY && reptype != LMI_FULLREP) {
+ printk(KERN_INFO "%s: Unsupported LMI Report type (0x%02X)\n",
+ dev->name, reptype);
+ return 1;
+ }
- if (skb->data[i]!=
- ((hdlc->state.fr.settings.lmi == LMI_CCITT)
- ? LMI_CCITT_ALIVE : LMI_ALIVE)) {
- printk(KERN_INFO "%s: Unsupported status element=%x\n",
- dev->name, skb->data[i]);
+ if (skb->data[++i] != (lmi == LMI_CCITT ? LMI_CCITT_ALIVE :
+ LMI_ANSI_CISCO_ALIVE)) {
+ printk(KERN_INFO "%s: Not an LMI Link integrity verification"
+ " IE (0x%02X)\n", dev->name, skb->data[i]);
return 1;
}
- i++;
- i++; /* Skip length field */
+ if (skb->data[++i] != LMI_INTEG_LEN) {
+ printk(KERN_INFO "%s: Invalid LMI Link integrity verification"
+ " IE length (%u)\n", dev->name, skb->data[i]);
+ return 1;
+ }
+ i++;
hdlc->state.fr.rxseq = skb->data[i++]; /* TX sequence from peer */
rxseq = skb->data[i++]; /* Should confirm our sequence */
txseq = hdlc->state.fr.txseq;
- if (hdlc->state.fr.settings.dce) {
- if (reptype != LMI_FULLREP && reptype != LMI_INTEGRITY) {
- printk(KERN_INFO "%s: Unsupported report type=%x\n",
- dev->name, reptype);
- return 1;
- }
+ if (dce)
hdlc->state.fr.last_poll = jiffies;
- }
error = 0;
if (!hdlc->state.fr.reliable)
@@ -703,7 +727,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb)
error = 1;
}
- if (hdlc->state.fr.settings.dce) {
+ if (dce) {
if (hdlc->state.fr.fullrep_sent && !error) {
/* Stop sending full report - the last one has been confirmed by DTE */
hdlc->state.fr.fullrep_sent = 0;
@@ -725,6 +749,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb)
hdlc->state.fr.dce_changed = 0;
}
+ hdlc->state.fr.request = 1; /* got request */
fr_lmi_send(dev, reptype == LMI_FULLREP ? 1 : 0);
return 0;
}
@@ -739,7 +764,6 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb)
if (reptype != LMI_FULLREP)
return 0;
- stat_len = 3;
pvc = hdlc->state.fr.first_pvc;
while (pvc) {
@@ -750,24 +774,35 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb)
no_ram = 0;
while (skb->len >= i + 2 + stat_len) {
u16 dlci;
+ u32 bw;
unsigned int active, new;
- if (skb->data[i] != ((hdlc->state.fr.settings.lmi == LMI_CCITT)
- ? LMI_CCITT_PVCSTAT : LMI_PVCSTAT)) {
- printk(KERN_WARNING "%s: Invalid PVCSTAT ID: %x\n",
- dev->name, skb->data[i]);
+ if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_PVCSTAT :
+ LMI_ANSI_CISCO_PVCSTAT)) {
+ printk(KERN_INFO "%s: Not an LMI PVC status IE"
+ " (0x%02X)\n", dev->name, skb->data[i]);
return 1;
}
- i++;
- if (skb->data[i] != stat_len) {
- printk(KERN_WARNING "%s: Invalid PVCSTAT length: %x\n",
- dev->name, skb->data[i]);
+ if (skb->data[++i] != stat_len) {
+ printk(KERN_INFO "%s: Invalid LMI PVC status IE length"
+ " (%u)\n", dev->name, skb->data[i]);
return 1;
}
i++;
- dlci = status_to_dlci(skb->data + i, &active, &new);
+ new = !! (skb->data[i + 2] & 0x08);
+ active = !! (skb->data[i + 2] & 0x02);
+ if (lmi == LMI_CISCO) {
+ dlci = (skb->data[i] << 8) | skb->data[i + 1];
+ bw = (skb->data[i + 3] << 16) |
+ (skb->data[i + 4] << 8) |
+ (skb->data[i + 5]);
+ } else {
+ dlci = ((skb->data[i] & 0x3F) << 4) |
+ ((skb->data[i + 1] & 0x78) >> 3);
+ bw = 0;
+ }
pvc = add_pvc(dev, dlci);
@@ -783,9 +818,11 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb)
pvc->state.deleted = 0;
if (active != pvc->state.active ||
new != pvc->state.new ||
+ bw != pvc->state.bandwidth ||
!pvc->state.exist) {
pvc->state.new = new;
pvc->state.active = active;
+ pvc->state.bandwidth = bw;
pvc_carrier(active, pvc);
fr_log_dlci_active(pvc);
}
@@ -801,6 +838,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb)
pvc_carrier(0, pvc);
pvc->state.active = pvc->state.new = 0;
pvc->state.exist = 0;
+ pvc->state.bandwidth = 0;
fr_log_dlci_active(pvc);
}
pvc = pvc->next;
@@ -829,22 +867,15 @@ static int fr_rx(struct sk_buff *skb)
dlci = q922_to_dlci(skb->data);
- if (dlci == LMI_DLCI) {
- if (hdlc->state.fr.settings.lmi == LMI_NONE)
- goto rx_error; /* LMI packet with no LMI? */
-
- if (data[3] == LMI_PROTO) {
- if (fr_lmi_recv(ndev, skb))
- goto rx_error;
- else {
- dev_kfree_skb_any(skb);
- return NET_RX_SUCCESS;
- }
- }
-
- printk(KERN_INFO "%s: Received non-LMI frame with LMI DLCI\n",
- ndev->name);
- goto rx_error;
+ if ((dlci == LMI_CCITT_ANSI_DLCI &&
+ (hdlc->state.fr.settings.lmi == LMI_ANSI ||
+ hdlc->state.fr.settings.lmi == LMI_CCITT)) ||
+ (dlci == LMI_CISCO_DLCI &&
+ hdlc->state.fr.settings.lmi == LMI_CISCO)) {
+ if (fr_lmi_recv(ndev, skb))
+ goto rx_error;
+ dev_kfree_skb_any(skb);
+ return NET_RX_SUCCESS;
}
pvc = find_pvc(hdlc, dlci);
@@ -1170,7 +1201,8 @@ int hdlc_fr_ioctl(struct net_device *dev, struct ifreq *ifr)
if ((new_settings.lmi != LMI_NONE &&
new_settings.lmi != LMI_ANSI &&
- new_settings.lmi != LMI_CCITT) ||
+ new_settings.lmi != LMI_CCITT &&
+ new_settings.lmi != LMI_CISCO) ||
new_settings.t391 < 1 ||
new_settings.t392 < 2 ||
new_settings.n391 < 1 ||
diff --git a/drivers/net/wan/hdlc_generic.c b/drivers/net/wan/hdlc_generic.c
index 6ed064cb446..a63f6a2cc4f 100644
--- a/drivers/net/wan/hdlc_generic.c
+++ b/drivers/net/wan/hdlc_generic.c
@@ -1,7 +1,7 @@
/*
* Generic HDLC support routines for Linux
*
- * Copyright (C) 1999 - 2003 Krzysztof Halasa <khc@pm.waw.pl>
+ * Copyright (C) 1999 - 2005 Krzysztof Halasa <khc@pm.waw.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
@@ -38,7 +38,7 @@
#include <linux/hdlc.h>
-static const char* version = "HDLC support module revision 1.17";
+static const char* version = "HDLC support module revision 1.18";
#undef DEBUG_LINK
@@ -126,10 +126,13 @@ void hdlc_set_carrier(int on, struct net_device *dev)
if (!hdlc->open)
goto carrier_exit;
- if (hdlc->carrier)
+ if (hdlc->carrier) {
+ printk(KERN_INFO "%s: Carrier detected\n", dev->name);
__hdlc_set_carrier_on(dev);
- else
+ } else {
+ printk(KERN_INFO "%s: Carrier lost\n", dev->name);
__hdlc_set_carrier_off(dev);
+ }
carrier_exit:
spin_unlock_irqrestore(&hdlc->state_lock, flags);
@@ -157,8 +160,11 @@ int hdlc_open(struct net_device *dev)
spin_lock_irq(&hdlc->state_lock);
- if (hdlc->carrier)
+ if (hdlc->carrier) {
+ printk(KERN_INFO "%s: Carrier detected\n", dev->name);
__hdlc_set_carrier_on(dev);
+ } else
+ printk(KERN_INFO "%s: No carrier\n", dev->name);
hdlc->open = 1;
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 15e545f66cd..2b948ea397d 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -723,7 +723,7 @@ static void lmc_watchdog (unsigned long data) /*fold00*/
/* lmc_reset (sc); Why reset??? The link can go down ok */
/* Inform the world that link has been lost */
- dev->flags &= ~IFF_RUNNING;
+ netif_carrier_off(dev);
}
/*
@@ -736,7 +736,7 @@ static void lmc_watchdog (unsigned long data) /*fold00*/
/* lmc_reset (sc); Again why reset??? */
/* Inform the world that link protocol is back up. */
- dev->flags |= IFF_RUNNING;
+ netif_carrier_on(dev);
/* Now we have to tell the syncppp that we had an outage
* and that it should deal. Calling sppp_reopen here
@@ -1168,8 +1168,6 @@ static void lmc_running_reset (struct net_device *dev) /*fold00*/
sc->lmc_media->set_link_status (sc, 1);
sc->lmc_media->set_status (sc, NULL);
- //dev->flags |= IFF_RUNNING;
-
netif_wake_queue(dev);
sc->lmc_txfull = 0;
@@ -1233,8 +1231,6 @@ static int lmc_ifdown (struct net_device *dev) /*fold00*/
csr6 &= ~LMC_DEC_SR; /* Turn off the Receive bit */
LMC_CSR_WRITE (sc, csr_command, csr6);
- dev->flags &= ~IFF_RUNNING;
-
sc->stats.rx_missed_errors +=
LMC_CSR_READ (sc, csr_missed_frames) & 0xffff;
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index a3a32430ae9..b1078baa1d5 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -492,6 +492,9 @@ EXPORT_SYMBOL(orinoco_debug);
static int suppress_linkstatus; /* = 0 */
module_param(suppress_linkstatus, bool, 0644);
MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes");
+static int ignore_disconnect; /* = 0 */
+module_param(ignore_disconnect, int, 0644);
+MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer");
/********************************************************************/
/* Compile time configuration and compatibility stuff */
@@ -604,7 +607,6 @@ struct hermes_rx_descriptor {
static int orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static int __orinoco_program_rids(struct net_device *dev);
static void __orinoco_set_multicast_list(struct net_device *dev);
-static int orinoco_debug_dump_recs(struct net_device *dev);
/********************************************************************/
/* Internal helper functions */
@@ -655,7 +657,7 @@ static int orinoco_open(struct net_device *dev)
return err;
}
-int orinoco_stop(struct net_device *dev)
+static int orinoco_stop(struct net_device *dev)
{
struct orinoco_private *priv = netdev_priv(dev);
int err = 0;
@@ -686,7 +688,7 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev)
struct orinoco_private *priv = netdev_priv(dev);
hermes_t *hw = &priv->hw;
struct iw_statistics *wstats = &priv->wstats;
- int err = 0;
+ int err;
unsigned long flags;
if (! netif_device_present(dev)) {
@@ -695,9 +697,21 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev)
return NULL; /* FIXME: Can we do better than this? */
}
+ /* If busy, return the old stats. Returning NULL may cause
+ * the interface to disappear from /proc/net/wireless */
if (orinoco_lock(priv, &flags) != 0)
- return NULL; /* FIXME: Erg, we've been signalled, how
- * do we propagate this back up? */
+ return wstats;
+
+ /* We can't really wait for the tallies inquiry command to
+ * complete, so we just use the previous results and trigger
+ * a new tallies inquiry command for next time - Jean II */
+ /* FIXME: Really we should wait for the inquiry to come back -
+ * as it is the stats we give don't make a whole lot of sense.
+ * Unfortunately, it's not clear how to do that within the
+ * wireless extensions framework: I think we're in user
+ * context, but a lock seems to be held by the time we get in
+ * here so we're not safe to sleep here. */
+ hermes_inquire(hw, HERMES_INQ_TALLIES);
if (priv->iw_mode == IW_MODE_ADHOC) {
memset(&wstats->qual, 0, sizeof(wstats->qual));
@@ -716,25 +730,16 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev)
err = HERMES_READ_RECORD(hw, USER_BAP,
HERMES_RID_COMMSQUALITY, &cq);
-
- wstats->qual.qual = (int)le16_to_cpu(cq.qual);
- wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95;
- wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95;
- wstats->qual.updated = 7;
+
+ if (!err) {
+ wstats->qual.qual = (int)le16_to_cpu(cq.qual);
+ wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95;
+ wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95;
+ wstats->qual.updated = 7;
+ }
}
- /* We can't really wait for the tallies inquiry command to
- * complete, so we just use the previous results and trigger
- * a new tallies inquiry command for next time - Jean II */
- /* FIXME: We're in user context (I think?), so we should just
- wait for the tallies to come through */
- err = hermes_inquire(hw, HERMES_INQ_TALLIES);
-
orinoco_unlock(priv, &flags);
-
- if (err)
- return NULL;
-
return wstats;
}
@@ -1275,9 +1280,10 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
len = sizeof(tallies);
}
- /* Read directly the data (no seek) */
- hermes_read_words(hw, HERMES_DATA1, (void *) &tallies,
- len / 2); /* FIXME: blech! */
+ err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len,
+ infofid, sizeof(info));
+ if (err)
+ break;
/* Increment our various counters */
/* wstats->discard.nwid - no wrong BSSID stuff */
@@ -1307,8 +1313,10 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
break;
}
- hermes_read_words(hw, HERMES_DATA1, (void *) &linkstatus,
- len / 2);
+ err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len,
+ infofid, sizeof(info));
+ if (err)
+ break;
newstatus = le16_to_cpu(linkstatus.linkstatus);
connected = (newstatus == HERMES_LINKSTATUS_CONNECTED)
@@ -1317,7 +1325,7 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
if (connected)
netif_carrier_on(dev);
- else
+ else if (!ignore_disconnect)
netif_carrier_off(dev);
if (newstatus != priv->last_linkstatus)
@@ -1350,6 +1358,8 @@ int __orinoco_up(struct net_device *dev)
struct hermes *hw = &priv->hw;
int err;
+ netif_carrier_off(dev); /* just to make sure */
+
err = __orinoco_program_rids(dev);
if (err) {
printk(KERN_ERR "%s: Error %d configuring card\n",
@@ -1413,7 +1423,7 @@ int orinoco_reinit_firmware(struct net_device *dev)
return err;
err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
- if (err == -EIO) {
+ if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) {
/* Try workaround for old Symbol firmware bug */
printk(KERN_WARNING "%s: firmware ALLOC bug detected "
"(old Symbol firmware?). Trying to work around... ",
@@ -1610,17 +1620,15 @@ static int __orinoco_program_rids(struct net_device *dev)
return err;
}
/* Set the channel/frequency */
- if (priv->channel == 0) {
- printk(KERN_DEBUG "%s: Channel is 0 in __orinoco_program_rids()\n", dev->name);
- if (priv->createibss)
- priv->channel = 10;
- }
- err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFOWNCHANNEL,
- priv->channel);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting channel\n",
- dev->name, err);
- return err;
+ if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFOWNCHANNEL,
+ priv->channel);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting channel %d\n",
+ dev->name, err, priv->channel);
+ return err;
+ }
}
if (priv->has_ibss) {
@@ -1916,7 +1924,7 @@ static void orinoco_reset(struct net_device *dev)
{
struct orinoco_private *priv = netdev_priv(dev);
struct hermes *hw = &priv->hw;
- int err = 0;
+ int err;
unsigned long flags;
if (orinoco_lock(priv, &flags) != 0)
@@ -1938,20 +1946,20 @@ static void orinoco_reset(struct net_device *dev)
orinoco_unlock(priv, &flags);
- if (priv->hard_reset)
+ if (priv->hard_reset) {
err = (*priv->hard_reset)(priv);
- if (err) {
- printk(KERN_ERR "%s: orinoco_reset: Error %d "
- "performing hard reset\n", dev->name, err);
- /* FIXME: shutdown of some sort */
- return;
+ if (err) {
+ printk(KERN_ERR "%s: orinoco_reset: Error %d "
+ "performing hard reset\n", dev->name, err);
+ goto disable;
+ }
}
err = orinoco_reinit_firmware(dev);
if (err) {
printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n",
dev->name, err);
- return;
+ goto disable;
}
spin_lock_irq(&priv->lock); /* This has to be called from user context */
@@ -1972,6 +1980,10 @@ static void orinoco_reset(struct net_device *dev)
spin_unlock_irq(&priv->lock);
return;
+ disable:
+ hermes_set_irqmask(hw, 0);
+ netif_device_detach(dev);
+ printk(KERN_ERR "%s: Device has been disabled!\n", dev->name);
}
/********************************************************************/
@@ -2056,7 +2068,7 @@ irqreturn_t orinoco_interrupt(int irq, void *dev_id, struct pt_regs *regs)
if (events & HERMES_EV_ALLOC)
__orinoco_ev_alloc(dev, hw);
- hermes_write_regn(hw, EVACK, events);
+ hermes_write_regn(hw, EVACK, evstat);
evstat = hermes_read_regn(hw, EVSTAT);
events = evstat & hw->inten;
@@ -2215,6 +2227,8 @@ static int determine_firmware(struct net_device *dev)
firmver >= 0x31000;
priv->has_preamble = (firmver >= 0x20000);
priv->ibss_port = 4;
+ priv->broken_disableport = (firmver == 0x25013) ||
+ (firmver >= 0x30000 && firmver <= 0x31000);
/* Tested with Intel firmware : 0x20015 => Jean II */
/* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */
break;
@@ -2267,7 +2281,7 @@ static int orinoco_init(struct net_device *dev)
priv->nicbuf_size = IEEE802_11_FRAME_LEN + ETH_HLEN;
/* Initialize the firmware */
- err = hermes_init(hw);
+ err = orinoco_reinit_firmware(dev);
if (err != 0) {
printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n",
dev->name, err);
@@ -2400,31 +2414,12 @@ static int orinoco_init(struct net_device *dev)
/* By default use IEEE/IBSS ad-hoc mode if we have it */
priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss);
set_port_type(priv);
- priv->channel = 10; /* default channel, more-or-less arbitrary */
+ priv->channel = 0; /* use firmware default */
priv->promiscuous = 0;
priv->wep_on = 0;
priv->tx_key = 0;
- err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
- if (err == -EIO) {
- /* Try workaround for old Symbol firmware bug */
- printk(KERN_WARNING "%s: firmware ALLOC bug detected "
- "(old Symbol firmware?). Trying to work around... ",
- dev->name);
-
- priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
- err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
- if (err)
- printk("failed!\n");
- else
- printk("ok.\n");
- }
- if (err) {
- printk("%s: Error %d allocating Tx buffer\n", dev->name, err);
- goto out;
- }
-
/* Make the hardware available, as long as it hasn't been
* removed elsewhere (e.g. by PCMCIA hot unplug) */
spin_lock_irq(&priv->lock);
@@ -2450,7 +2445,7 @@ struct net_device *alloc_orinocodev(int sizeof_card,
priv = netdev_priv(dev);
priv->ndev = dev;
if (sizeof_card)
- priv->card = (void *)((unsigned long)netdev_priv(dev)
+ priv->card = (void *)((unsigned long)priv
+ sizeof(struct orinoco_private));
else
priv->card = NULL;
@@ -2555,6 +2550,7 @@ static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
}
len = le16_to_cpu(essidbuf.len);
+ BUG_ON(len > IW_ESSID_MAX_SIZE);
memset(buf, 0, IW_ESSID_MAX_SIZE+1);
memcpy(buf, p, len);
@@ -2923,13 +2919,14 @@ static int orinoco_ioctl_setessid(struct net_device *dev, struct iw_point *erq)
memset(&essidbuf, 0, sizeof(essidbuf));
if (erq->flags) {
- if (erq->length > IW_ESSID_MAX_SIZE)
+ /* iwconfig includes the NUL in the specified length */
+ if (erq->length > IW_ESSID_MAX_SIZE+1)
return -E2BIG;
if (copy_from_user(&essidbuf, erq->pointer, erq->length))
return -EFAULT;
- essidbuf[erq->length] = '\0';
+ essidbuf[IW_ESSID_MAX_SIZE] = '\0';
}
if (orinoco_lock(priv, &flags) != 0)
@@ -3855,7 +3852,6 @@ orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{ SIOCIWFIRSTPRIV + 0x7, 0,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
"get_ibssport" },
- { SIOCIWLASTPRIV, 0, 0, "dump_recs" },
};
wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]);
@@ -3943,14 +3939,6 @@ orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
err = orinoco_ioctl_getibssport(dev, wrq);
break;
- case SIOCIWLASTPRIV:
- err = orinoco_debug_dump_recs(dev);
- if (err)
- printk(KERN_ERR "%s: Unable to dump records (%d)\n",
- dev->name, err);
- break;
-
-
default:
err = -EOPNOTSUPP;
}
@@ -3964,187 +3952,6 @@ orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
return err;
}
-struct {
- u16 rid;
- char *name;
- int displaytype;
-#define DISPLAY_WORDS 0
-#define DISPLAY_BYTES 1
-#define DISPLAY_STRING 2
-#define DISPLAY_XSTRING 3
-} record_table[] = {
-#define DEBUG_REC(name,type) { HERMES_RID_##name, #name, DISPLAY_##type }
- DEBUG_REC(CNFPORTTYPE,WORDS),
- DEBUG_REC(CNFOWNMACADDR,BYTES),
- DEBUG_REC(CNFDESIREDSSID,STRING),
- DEBUG_REC(CNFOWNCHANNEL,WORDS),
- DEBUG_REC(CNFOWNSSID,STRING),
- DEBUG_REC(CNFOWNATIMWINDOW,WORDS),
- DEBUG_REC(CNFSYSTEMSCALE,WORDS),
- DEBUG_REC(CNFMAXDATALEN,WORDS),
- DEBUG_REC(CNFPMENABLED,WORDS),
- DEBUG_REC(CNFPMEPS,WORDS),
- DEBUG_REC(CNFMULTICASTRECEIVE,WORDS),
- DEBUG_REC(CNFMAXSLEEPDURATION,WORDS),
- DEBUG_REC(CNFPMHOLDOVERDURATION,WORDS),
- DEBUG_REC(CNFOWNNAME,STRING),
- DEBUG_REC(CNFOWNDTIMPERIOD,WORDS),
- DEBUG_REC(CNFMULTICASTPMBUFFERING,WORDS),
- DEBUG_REC(CNFWEPENABLED_AGERE,WORDS),
- DEBUG_REC(CNFMANDATORYBSSID_SYMBOL,WORDS),
- DEBUG_REC(CNFWEPDEFAULTKEYID,WORDS),
- DEBUG_REC(CNFDEFAULTKEY0,BYTES),
- DEBUG_REC(CNFDEFAULTKEY1,BYTES),
- DEBUG_REC(CNFMWOROBUST_AGERE,WORDS),
- DEBUG_REC(CNFDEFAULTKEY2,BYTES),
- DEBUG_REC(CNFDEFAULTKEY3,BYTES),
- DEBUG_REC(CNFWEPFLAGS_INTERSIL,WORDS),
- DEBUG_REC(CNFWEPKEYMAPPINGTABLE,WORDS),
- DEBUG_REC(CNFAUTHENTICATION,WORDS),
- DEBUG_REC(CNFMAXASSOCSTA,WORDS),
- DEBUG_REC(CNFKEYLENGTH_SYMBOL,WORDS),
- DEBUG_REC(CNFTXCONTROL,WORDS),
- DEBUG_REC(CNFROAMINGMODE,WORDS),
- DEBUG_REC(CNFHOSTAUTHENTICATION,WORDS),
- DEBUG_REC(CNFRCVCRCERROR,WORDS),
- DEBUG_REC(CNFMMLIFE,WORDS),
- DEBUG_REC(CNFALTRETRYCOUNT,WORDS),
- DEBUG_REC(CNFBEACONINT,WORDS),
- DEBUG_REC(CNFAPPCFINFO,WORDS),
- DEBUG_REC(CNFSTAPCFINFO,WORDS),
- DEBUG_REC(CNFPRIORITYQUSAGE,WORDS),
- DEBUG_REC(CNFTIMCTRL,WORDS),
- DEBUG_REC(CNFTHIRTY2TALLY,WORDS),
- DEBUG_REC(CNFENHSECURITY,WORDS),
- DEBUG_REC(CNFGROUPADDRESSES,BYTES),
- DEBUG_REC(CNFCREATEIBSS,WORDS),
- DEBUG_REC(CNFFRAGMENTATIONTHRESHOLD,WORDS),
- DEBUG_REC(CNFRTSTHRESHOLD,WORDS),
- DEBUG_REC(CNFTXRATECONTROL,WORDS),
- DEBUG_REC(CNFPROMISCUOUSMODE,WORDS),
- DEBUG_REC(CNFBASICRATES_SYMBOL,WORDS),
- DEBUG_REC(CNFPREAMBLE_SYMBOL,WORDS),
- DEBUG_REC(CNFSHORTPREAMBLE,WORDS),
- DEBUG_REC(CNFWEPKEYS_AGERE,BYTES),
- DEBUG_REC(CNFEXCLUDELONGPREAMBLE,WORDS),
- DEBUG_REC(CNFTXKEY_AGERE,WORDS),
- DEBUG_REC(CNFAUTHENTICATIONRSPTO,WORDS),
- DEBUG_REC(CNFBASICRATES,WORDS),
- DEBUG_REC(CNFSUPPORTEDRATES,WORDS),
- DEBUG_REC(CNFTICKTIME,WORDS),
- DEBUG_REC(CNFSCANREQUEST,WORDS),
- DEBUG_REC(CNFJOINREQUEST,WORDS),
- DEBUG_REC(CNFAUTHENTICATESTATION,WORDS),
- DEBUG_REC(CNFCHANNELINFOREQUEST,WORDS),
- DEBUG_REC(MAXLOADTIME,WORDS),
- DEBUG_REC(DOWNLOADBUFFER,WORDS),
- DEBUG_REC(PRIID,WORDS),
- DEBUG_REC(PRISUPRANGE,WORDS),
- DEBUG_REC(CFIACTRANGES,WORDS),
- DEBUG_REC(NICSERNUM,XSTRING),
- DEBUG_REC(NICID,WORDS),
- DEBUG_REC(MFISUPRANGE,WORDS),
- DEBUG_REC(CFISUPRANGE,WORDS),
- DEBUG_REC(CHANNELLIST,WORDS),
- DEBUG_REC(REGULATORYDOMAINS,WORDS),
- DEBUG_REC(TEMPTYPE,WORDS),
-/* DEBUG_REC(CIS,BYTES), */
- DEBUG_REC(STAID,WORDS),
- DEBUG_REC(CURRENTSSID,STRING),
- DEBUG_REC(CURRENTBSSID,BYTES),
- DEBUG_REC(COMMSQUALITY,WORDS),
- DEBUG_REC(CURRENTTXRATE,WORDS),
- DEBUG_REC(CURRENTBEACONINTERVAL,WORDS),
- DEBUG_REC(CURRENTSCALETHRESHOLDS,WORDS),
- DEBUG_REC(PROTOCOLRSPTIME,WORDS),
- DEBUG_REC(SHORTRETRYLIMIT,WORDS),
- DEBUG_REC(LONGRETRYLIMIT,WORDS),
- DEBUG_REC(MAXTRANSMITLIFETIME,WORDS),
- DEBUG_REC(MAXRECEIVELIFETIME,WORDS),
- DEBUG_REC(CFPOLLABLE,WORDS),
- DEBUG_REC(AUTHENTICATIONALGORITHMS,WORDS),
- DEBUG_REC(PRIVACYOPTIONIMPLEMENTED,WORDS),
- DEBUG_REC(OWNMACADDR,BYTES),
- DEBUG_REC(SCANRESULTSTABLE,WORDS),
- DEBUG_REC(PHYTYPE,WORDS),
- DEBUG_REC(CURRENTCHANNEL,WORDS),
- DEBUG_REC(CURRENTPOWERSTATE,WORDS),
- DEBUG_REC(CCAMODE,WORDS),
- DEBUG_REC(SUPPORTEDDATARATES,WORDS),
- DEBUG_REC(BUILDSEQ,BYTES),
- DEBUG_REC(FWID,XSTRING)
-#undef DEBUG_REC
-};
-
-#define DEBUG_LTV_SIZE 128
-
-static int orinoco_debug_dump_recs(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- u8 *val8;
- u16 *val16;
- int i,j;
- u16 length;
- int err;
-
- /* I'm not sure: we might have a lock here, so we'd better go
- atomic, just in case. */
- val8 = kmalloc(DEBUG_LTV_SIZE + 2, GFP_ATOMIC);
- if (! val8)
- return -ENOMEM;
- val16 = (u16 *)val8;
-
- for (i = 0; i < ARRAY_SIZE(record_table); i++) {
- u16 rid = record_table[i].rid;
- int len;
-
- memset(val8, 0, DEBUG_LTV_SIZE + 2);
-
- err = hermes_read_ltv(hw, USER_BAP, rid, DEBUG_LTV_SIZE,
- &length, val8);
- if (err) {
- DEBUG(0, "Error %d reading RID 0x%04x\n", err, rid);
- continue;
- }
- val16 = (u16 *)val8;
- if (length == 0)
- continue;
-
- printk(KERN_DEBUG "%-15s (0x%04x): length=%d (%d bytes)\tvalue=",
- record_table[i].name,
- rid, length, (length-1)*2);
- len = min(((int)length-1)*2, DEBUG_LTV_SIZE);
-
- switch (record_table[i].displaytype) {
- case DISPLAY_WORDS:
- for (j = 0; j < len / 2; j++)
- printk("%04X-", le16_to_cpu(val16[j]));
- break;
-
- case DISPLAY_BYTES:
- default:
- for (j = 0; j < len; j++)
- printk("%02X:", val8[j]);
- break;
-
- case DISPLAY_STRING:
- len = min(len, le16_to_cpu(val16[0])+2);
- val8[len] = '\0';
- printk("\"%s\"", (char *)&val16[1]);
- break;
-
- case DISPLAY_XSTRING:
- printk("'%s'", (char *)val8);
- }
-
- printk("\n");
- }
-
- kfree(val8);
-
- return 0;
-}
/********************************************************************/
/* Debugging */
@@ -4218,7 +4025,6 @@ EXPORT_SYMBOL(free_orinocodev);
EXPORT_SYMBOL(__orinoco_up);
EXPORT_SYMBOL(__orinoco_down);
-EXPORT_SYMBOL(orinoco_stop);
EXPORT_SYMBOL(orinoco_reinit_firmware);
EXPORT_SYMBOL(orinoco_interrupt);
diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h
index 13e42c2afb2..f749b50d108 100644
--- a/drivers/net/wireless/orinoco.h
+++ b/drivers/net/wireless/orinoco.h
@@ -119,7 +119,6 @@ extern struct net_device *alloc_orinocodev(int sizeof_card,
extern void free_orinocodev(struct net_device *dev);
extern int __orinoco_up(struct net_device *dev);
extern int __orinoco_down(struct net_device *dev);
-extern int orinoco_stop(struct net_device *dev);
extern int orinoco_reinit_firmware(struct net_device *dev);
extern irqreturn_t orinoco_interrupt(int irq, void * dev_id, struct pt_regs *regs);
diff --git a/include/linux/dm9000.h b/include/linux/dm9000.h
new file mode 100644
index 00000000000..0008e2ad0c9
--- /dev/null
+++ b/include/linux/dm9000.h
@@ -0,0 +1,36 @@
+/* include/linux/dm9000.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for dm9000 platform data
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#ifndef __DM9000_PLATFORM_DATA
+#define __DM9000_PLATFORM_DATA __FILE__
+
+/* IO control flags */
+
+#define DM9000_PLATF_8BITONLY (0x0001)
+#define DM9000_PLATF_16BITONLY (0x0002)
+#define DM9000_PLATF_32BITONLY (0x0004)
+
+/* platfrom data for platfrom device structure's platfrom_data field */
+
+struct dm9000_plat_data {
+ unsigned int flags;
+
+ /* allow replacement IO routines */
+
+ void (*inblk)(void __iomem *reg, void *data, int len);
+ void (*outblk)(void __iomem *reg, void *data, int len);
+ void (*dumpblk)(void __iomem *reg, int len);
+};
+
+#endif /* __DM9000_PLATFORM_DATA */
+
diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h
index 503194e62fe..ed2927ef1ff 100644
--- a/include/linux/hdlc.h
+++ b/include/linux/hdlc.h
@@ -1,7 +1,7 @@
/*
* Generic HDLC support routines for Linux
*
- * Copyright (C) 1999-2003 Krzysztof Halasa <khc@pm.waw.pl>
+ * Copyright (C) 1999-2005 Krzysztof Halasa <khc@pm.waw.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
@@ -41,6 +41,7 @@
#define LMI_NONE 1 /* No LMI, all PVCs are static */
#define LMI_ANSI 2 /* ANSI Annex D */
#define LMI_CCITT 3 /* ITU-T Annex A */
+#define LMI_CISCO 4 /* The "original" LMI, aka Gang of Four */
#define HDLC_MAX_MTU 1500 /* Ethernet 1500 bytes */
#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */
@@ -89,6 +90,7 @@ typedef struct pvc_device_struct {
unsigned int deleted: 1;
unsigned int fecn: 1;
unsigned int becn: 1;
+ unsigned int bandwidth; /* Cisco LMI reporting only */
}state;
}pvc_device;
diff --git a/include/linux/if.h b/include/linux/if.h
index d73a9d62f20..ce627d9092e 100644
--- a/include/linux/if.h
+++ b/include/linux/if.h
@@ -33,7 +33,7 @@
#define IFF_LOOPBACK 0x8 /* is a loopback net */
#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */
#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */
-#define IFF_RUNNING 0x40 /* resources allocated */
+#define IFF_RUNNING 0x40 /* interface running and carrier ok */
#define IFF_NOARP 0x80 /* no ARP protocol */
#define IFF_PROMISC 0x100 /* receive all packets */
#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/
diff --git a/include/linux/wireless.h b/include/linux/wireless.h
index 2f51f2b6562..ae485f9c916 100644
--- a/include/linux/wireless.h
+++ b/include/linux/wireless.h
@@ -1,10 +1,10 @@
/*
* This file define a set of standard wireless extensions
*
- * Version : 17 21.6.04
+ * Version : 18 12.3.05
*
* Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com>
- * Copyright (c) 1997-2004 Jean Tourrilhes, All Rights Reserved.
+ * Copyright (c) 1997-2005 Jean Tourrilhes, All Rights Reserved.
*/
#ifndef _LINUX_WIRELESS_H
@@ -82,7 +82,7 @@
* (there is some stuff that will be added in the future...)
* I just plan to increment with each new version.
*/
-#define WIRELESS_EXT 17
+#define WIRELESS_EXT 18
/*
* Changes :
@@ -182,6 +182,21 @@
* - Document (struct iw_quality *)->updated, add new flags (INVALID)
* - Wireless Event capability in struct iw_range
* - Add support for relative TxPower (yick !)
+ *
+ * V17 to V18 (From Jouni Malinen <jkmaline@cc.hut.fi>)
+ * ----------
+ * - Add support for WPA/WPA2
+ * - Add extended encoding configuration (SIOCSIWENCODEEXT and
+ * SIOCGIWENCODEEXT)
+ * - Add SIOCSIWGENIE/SIOCGIWGENIE
+ * - Add SIOCSIWMLME
+ * - Add SIOCSIWPMKSA
+ * - Add struct iw_range bit field for supported encoding capabilities
+ * - Add optional scan request parameters for SIOCSIWSCAN
+ * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
+ * related parameters (extensible up to 4096 parameter values)
+ * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
+ * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
*/
/**************************** CONSTANTS ****************************/
@@ -256,6 +271,30 @@
#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */
#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */
+/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
+ * This ioctl uses struct iw_point and data buffer that includes IE id and len
+ * fields. More than one IE may be included in the request. Setting the generic
+ * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
+ * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
+ * are required to report the used IE as a wireless event, e.g., when
+ * associating with an AP. */
+#define SIOCSIWGENIE 0x8B30 /* set generic IE */
+#define SIOCGIWGENIE 0x8B31 /* get generic IE */
+
+/* WPA : IEEE 802.11 MLME requests */
+#define SIOCSIWMLME 0x8B16 /* request MLME operation; uses
+ * struct iw_mlme */
+/* WPA : Authentication mode parameters */
+#define SIOCSIWAUTH 0x8B32 /* set authentication mode params */
+#define SIOCGIWAUTH 0x8B33 /* get authentication mode params */
+
+/* WPA : Extended version of encoding configuration */
+#define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */
+#define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */
+
+/* WPA2 : PMKSA cache management */
+#define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */
+
/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
/* These 32 ioctl are wireless device private, for 16 commands.
@@ -297,6 +336,34 @@
#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */
#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */
#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */
+#define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..)
+ * (scan results); This includes id and
+ * length fields. One IWEVGENIE may
+ * contain more than one IE. Scan
+ * results may contain one or more
+ * IWEVGENIE events. */
+#define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure
+ * (struct iw_michaelmicfailure)
+ */
+#define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request.
+ * The data includes id and length
+ * fields and may contain more than one
+ * IE. This event is required in
+ * Managed mode if the driver
+ * generates its own WPA/RSN IE. This
+ * should be sent just before
+ * IWEVREGISTERED event for the
+ * association. */
+#define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association
+ * Response. The data includes id and
+ * length fields and may contain more
+ * than one IE. This may be sent
+ * between IWEVASSOCREQIE and
+ * IWEVREGISTERED events for the
+ * association. */
+#define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN
+ * pre-authentication
+ * (struct iw_pmkid_cand) */
#define IWEVFIRST 0x8C00
@@ -432,12 +499,94 @@
#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */
#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */
#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */
+/* struct iw_scan_req scan_type */
+#define IW_SCAN_TYPE_ACTIVE 0
+#define IW_SCAN_TYPE_PASSIVE 1
/* Maximum size of returned data */
#define IW_SCAN_MAX_DATA 4096 /* In bytes */
/* Max number of char in custom event - use multiple of them if needed */
#define IW_CUSTOM_MAX 256 /* In bytes */
+/* Generic information element */
+#define IW_GENERIC_IE_MAX 1024
+
+/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
+#define IW_MLME_DEAUTH 0
+#define IW_MLME_DISASSOC 1
+
+/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
+#define IW_AUTH_INDEX 0x0FFF
+#define IW_AUTH_FLAGS 0xF000
+/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
+ * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
+ * parameter that is being set/get to; value will be read/written to
+ * struct iw_param value field) */
+#define IW_AUTH_WPA_VERSION 0
+#define IW_AUTH_CIPHER_PAIRWISE 1
+#define IW_AUTH_CIPHER_GROUP 2
+#define IW_AUTH_KEY_MGMT 3
+#define IW_AUTH_TKIP_COUNTERMEASURES 4
+#define IW_AUTH_DROP_UNENCRYPTED 5
+#define IW_AUTH_80211_AUTH_ALG 6
+#define IW_AUTH_WPA_ENABLED 7
+#define IW_AUTH_RX_UNENCRYPTED_EAPOL 8
+#define IW_AUTH_ROAMING_CONTROL 9
+#define IW_AUTH_PRIVACY_INVOKED 10
+
+/* IW_AUTH_WPA_VERSION values (bit field) */
+#define IW_AUTH_WPA_VERSION_DISABLED 0x00000001
+#define IW_AUTH_WPA_VERSION_WPA 0x00000002
+#define IW_AUTH_WPA_VERSION_WPA2 0x00000004
+
+/* IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values (bit field) */
+#define IW_AUTH_CIPHER_NONE 0x00000001
+#define IW_AUTH_CIPHER_WEP40 0x00000002
+#define IW_AUTH_CIPHER_TKIP 0x00000004
+#define IW_AUTH_CIPHER_CCMP 0x00000008
+#define IW_AUTH_CIPHER_WEP104 0x00000010
+
+/* IW_AUTH_KEY_MGMT values (bit field) */
+#define IW_AUTH_KEY_MGMT_802_1X 1
+#define IW_AUTH_KEY_MGMT_PSK 2
+
+/* IW_AUTH_80211_AUTH_ALG values (bit field) */
+#define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001
+#define IW_AUTH_ALG_SHARED_KEY 0x00000002
+#define IW_AUTH_ALG_LEAP 0x00000004
+
+/* IW_AUTH_ROAMING_CONTROL values */
+#define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */
+#define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming
+ * control */
+
+/* SIOCSIWENCODEEXT definitions */
+#define IW_ENCODE_SEQ_MAX_SIZE 8
+/* struct iw_encode_ext ->alg */
+#define IW_ENCODE_ALG_NONE 0
+#define IW_ENCODE_ALG_WEP 1
+#define IW_ENCODE_ALG_TKIP 2
+#define IW_ENCODE_ALG_CCMP 3
+/* struct iw_encode_ext ->ext_flags */
+#define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001
+#define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002
+#define IW_ENCODE_EXT_GROUP_KEY 0x00000004
+#define IW_ENCODE_EXT_SET_TX_KEY 0x00000008
+
+/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
+#define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */
+#define IW_MICFAILURE_GROUP 0x00000004
+#define IW_MICFAILURE_PAIRWISE 0x00000008
+#define IW_MICFAILURE_STAKEY 0x00000010
+#define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported)
+ */
+
+/* Bit field values for enc_capa in struct iw_range */
+#define IW_ENC_CAPA_WPA 0x00000001
+#define IW_ENC_CAPA_WPA2 0x00000002
+#define IW_ENC_CAPA_CIPHER_TKIP 0x00000004
+#define IW_ENC_CAPA_CIPHER_CCMP 0x00000008
+
/* Event capability macros - in (struct iw_range *)->event_capa
* Because we have more than 32 possible events, we use an array of
* 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
@@ -546,6 +695,132 @@ struct iw_thrspy
struct iw_quality high; /* High threshold */
};
+/*
+ * Optional data for scan request
+ *
+ * Note: these optional parameters are controlling parameters for the
+ * scanning behavior, these do not apply to getting scan results
+ * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
+ * provide a merged results with all BSSes even if the previous scan
+ * request limited scanning to a subset, e.g., by specifying an SSID.
+ * Especially, scan results are required to include an entry for the
+ * current BSS if the driver is in Managed mode and associated with an AP.
+ */
+struct iw_scan_req
+{
+ __u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
+ __u8 essid_len;
+ __u8 num_channels; /* num entries in channel_list;
+ * 0 = scan all allowed channels */
+ __u8 flags; /* reserved as padding; use zero, this may
+ * be used in the future for adding flags
+ * to request different scan behavior */
+ struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
+ * individual address of a specific BSS */
+
+ /*
+ * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
+ * the current ESSID. This allows scan requests for specific ESSID
+ * without having to change the current ESSID and potentially breaking
+ * the current association.
+ */
+ __u8 essid[IW_ESSID_MAX_SIZE];
+
+ /*
+ * Optional parameters for changing the default scanning behavior.
+ * These are based on the MLME-SCAN.request from IEEE Std 802.11.
+ * TU is 1.024 ms. If these are set to 0, driver is expected to use
+ * reasonable default values. min_channel_time defines the time that
+ * will be used to wait for the first reply on each channel. If no
+ * replies are received, next channel will be scanned after this. If
+ * replies are received, total time waited on the channel is defined by
+ * max_channel_time.
+ */
+ __u32 min_channel_time; /* in TU */
+ __u32 max_channel_time; /* in TU */
+
+ struct iw_freq channel_list[IW_MAX_FREQUENCIES];
+};
+
+/* ------------------------- WPA SUPPORT ------------------------- */
+
+/*
+ * Extended data structure for get/set encoding (this is used with
+ * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
+ * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
+ * only the data contents changes (key data -> this structure, including
+ * key data).
+ *
+ * If the new key is the first group key, it will be set as the default
+ * TX key. Otherwise, default TX key index is only changed if
+ * IW_ENCODE_EXT_SET_TX_KEY flag is set.
+ *
+ * Key will be changed with SIOCSIWENCODEEXT in all cases except for
+ * special "change TX key index" operation which is indicated by setting
+ * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
+ *
+ * tx_seq/rx_seq are only used when respective
+ * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
+ * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
+ * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
+ * used only by an Authenticator (AP or an IBSS station) to get the
+ * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
+ * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
+ * debugging/testing.
+ */
+struct iw_encode_ext
+{
+ __u32 ext_flags; /* IW_ENCODE_EXT_* */
+ __u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+ __u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+ struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
+ * (group) keys or unicast address for
+ * individual keys */
+ __u16 alg; /* IW_ENCODE_ALG_* */
+ __u16 key_len;
+ __u8 key[0];
+};
+
+/* SIOCSIWMLME data */
+struct iw_mlme
+{
+ __u16 cmd; /* IW_MLME_* */
+ __u16 reason_code;
+ struct sockaddr addr;
+};
+
+/* SIOCSIWPMKSA data */
+#define IW_PMKSA_ADD 1
+#define IW_PMKSA_REMOVE 2
+#define IW_PMKSA_FLUSH 3
+
+#define IW_PMKID_LEN 16
+
+struct iw_pmksa
+{
+ __u32 cmd; /* IW_PMKSA_* */
+ struct sockaddr bssid;
+ __u8 pmkid[IW_PMKID_LEN];
+};
+
+/* IWEVMICHAELMICFAILURE data */
+struct iw_michaelmicfailure
+{
+ __u32 flags;
+ struct sockaddr src_addr;
+ __u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+};
+
+/* IWEVPMKIDCAND data */
+#define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */
+struct iw_pmkid_cand
+{
+ __u32 flags; /* IW_PMKID_CAND_* */
+ __u32 index; /* the smaller the index, the higher the
+ * priority */
+ struct sockaddr bssid;
+};
+
/* ------------------------ WIRELESS STATS ------------------------ */
/*
* Wireless statistics (used for /proc/net/wireless)
@@ -725,6 +1000,8 @@ struct iw_range
struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */
/* Note : this frequency list doesn't need to fit channel numbers,
* because each entry contain its channel index */
+
+ __u32 enc_capa; /* IW_ENC_CAPA_* bit field */
};
/*
diff --git a/net/core/wireless.c b/net/core/wireless.c
index 750cc5daeb0..b2fe378dfbf 100644
--- a/net/core/wireless.c
+++ b/net/core/wireless.c
@@ -2,7 +2,7 @@
* This file implement the Wireless Extensions APIs.
*
* Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com>
- * Copyright (c) 1997-2004 Jean Tourrilhes, All Rights Reserved.
+ * Copyright (c) 1997-2005 Jean Tourrilhes, All Rights Reserved.
*
* (As all part of the Linux kernel, this file is GPL)
*/
@@ -187,6 +187,12 @@ static const struct iw_ioctl_description standard_ioctl[] = {
.header_type = IW_HEADER_TYPE_ADDR,
.flags = IW_DESCR_FLAG_DUMP,
},
+ [SIOCSIWMLME - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .min_tokens = sizeof(struct iw_mlme),
+ .max_tokens = sizeof(struct iw_mlme),
+ },
[SIOCGIWAPLIST - SIOCIWFIRST] = {
.header_type = IW_HEADER_TYPE_POINT,
.token_size = sizeof(struct sockaddr) +
@@ -195,7 +201,10 @@ static const struct iw_ioctl_description standard_ioctl[] = {
.flags = IW_DESCR_FLAG_NOMAX,
},
[SIOCSIWSCAN - SIOCIWFIRST] = {
- .header_type = IW_HEADER_TYPE_PARAM,
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .min_tokens = 0,
+ .max_tokens = sizeof(struct iw_scan_req),
},
[SIOCGIWSCAN - SIOCIWFIRST] = {
.header_type = IW_HEADER_TYPE_POINT,
@@ -273,6 +282,42 @@ static const struct iw_ioctl_description standard_ioctl[] = {
[SIOCGIWPOWER - SIOCIWFIRST] = {
.header_type = IW_HEADER_TYPE_PARAM,
},
+ [SIOCSIWGENIE - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_GENERIC_IE_MAX,
+ },
+ [SIOCGIWGENIE - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_GENERIC_IE_MAX,
+ },
+ [SIOCSIWAUTH - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCGIWAUTH - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_PARAM,
+ },
+ [SIOCSIWENCODEEXT - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .min_tokens = sizeof(struct iw_encode_ext),
+ .max_tokens = sizeof(struct iw_encode_ext) +
+ IW_ENCODING_TOKEN_MAX,
+ },
+ [SIOCGIWENCODEEXT - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .min_tokens = sizeof(struct iw_encode_ext),
+ .max_tokens = sizeof(struct iw_encode_ext) +
+ IW_ENCODING_TOKEN_MAX,
+ },
+ [SIOCSIWPMKSA - SIOCIWFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .min_tokens = sizeof(struct iw_pmksa),
+ .max_tokens = sizeof(struct iw_pmksa),
+ },
};
static const int standard_ioctl_num = (sizeof(standard_ioctl) /
sizeof(struct iw_ioctl_description));
@@ -299,6 +344,31 @@ static const struct iw_ioctl_description standard_event[] = {
[IWEVEXPIRED - IWEVFIRST] = {
.header_type = IW_HEADER_TYPE_ADDR,
},
+ [IWEVGENIE - IWEVFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_GENERIC_IE_MAX,
+ },
+ [IWEVMICHAELMICFAILURE - IWEVFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = sizeof(struct iw_michaelmicfailure),
+ },
+ [IWEVASSOCREQIE - IWEVFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_GENERIC_IE_MAX,
+ },
+ [IWEVASSOCRESPIE - IWEVFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = IW_GENERIC_IE_MAX,
+ },
+ [IWEVPMKIDCAND - IWEVFIRST] = {
+ .header_type = IW_HEADER_TYPE_POINT,
+ .token_size = 1,
+ .max_tokens = sizeof(struct iw_pmkid_cand),
+ },
};
static const int standard_event_num = (sizeof(standard_event) /
sizeof(struct iw_ioctl_description));