aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/ide/pci/siimage.c62
1 files changed, 12 insertions, 50 deletions
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index f1ca154dd52..72dade14c72 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -38,9 +38,6 @@
#include <asm/io.h>
-#undef SIIMAGE_VIRTUAL_DMAPIO
-#undef SIIMAGE_LARGE_DMA
-
/**
* pdev_is_sata - check if device is SATA
* @pdev: PCI device to check
@@ -461,36 +458,6 @@ static int siimage_io_ide_dma_test_irq (ide_drive_t *drive)
return 0;
}
-#if 0
-/**
- * siimage_mmio_ide_dma_count - DMA bytes done
- * @drive
- *
- * If we are doing VDMA the CMD680 requires a little bit
- * of more careful handling and we have to read the counts
- * off ourselves. For non VDMA life is normal.
- */
-
-static int siimage_mmio_ide_dma_count (ide_drive_t *drive)
-{
-#ifdef SIIMAGE_VIRTUAL_DMAPIO
- struct request *rq = HWGROUP(drive)->rq;
- ide_hwif_t *hwif = HWIF(drive);
- u32 count = (rq->nr_sectors * SECTOR_SIZE);
- u32 rcount = 0;
- unsigned long addr = siimage_selreg(hwif, 0x1C);
-
- hwif->OUTL(count, addr);
- rcount = hwif->INL(addr);
-
- printk("\n%s: count = %d, rcount = %d, nr_sectors = %lu\n",
- drive->name, count, rcount, rq->nr_sectors);
-
-#endif /* SIIMAGE_VIRTUAL_DMAPIO */
- return __ide_dma_count(drive);
-}
-#endif
-
/**
* siimage_mmio_ide_dma_test_irq - check we caused an IRQ
* @drive: drive we are testing
@@ -512,12 +479,10 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive)
u32 sata_error = hwif->INL(SATA_ERROR_REG);
hwif->OUTL(sata_error, SATA_ERROR_REG);
watchdog = (sata_error & 0x00680000) ? 1 : 0;
-#if 1
printk(KERN_WARNING "%s: sata_error = 0x%08x, "
"watchdog = %d, %s\n",
drive->name, sata_error, watchdog,
__FUNCTION__);
-#endif
} else {
watchdog = (ext_stat & 0x8000) ? 1 : 0;
@@ -863,7 +828,7 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const ch
* time.
*
* The hardware supports buffered taskfiles and also some rather nice
- * extended PRD tables. Unfortunately right now we don't.
+ * extended PRD tables. For better SI3112 support use the libata driver
*/
static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
@@ -900,9 +865,6 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
* so we can't currently use it sanely since we want to
* use LBA48 mode.
*/
-// base += 0x10;
-// hwif->no_lba48 = 1;
-
hw.io_ports[IDE_DATA_OFFSET] = base;
hw.io_ports[IDE_ERROR_OFFSET] = base + 1;
hw.io_ports[IDE_NSECTOR_OFFSET] = base + 2;
@@ -936,15 +898,8 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
base = (unsigned long) addr;
-#ifdef SIIMAGE_LARGE_DMA
-/* Watch the brackets - even Ken and Dennis get some language design wrong */
- hwif->dma_base = base + (ch ? 0x18 : 0x10);
- hwif->dma_base2 = base + (ch ? 0x08 : 0x00);
- hwif->dma_prdtable = hwif->dma_base2 + 4;
-#else /* ! SIIMAGE_LARGE_DMA */
hwif->dma_base = base + (ch ? 0x08 : 0x00);
hwif->dma_base2 = base + (ch ? 0x18 : 0x10);
-#endif /* SIIMAGE_LARGE_DMA */
hwif->mmio = 2;
}
@@ -1052,9 +1007,16 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
hwif->reset_poll = &siimage_reset_poll;
hwif->pre_reset = &siimage_pre_reset;
- if(is_sata(hwif))
+ if(is_sata(hwif)) {
+ static int first = 1;
+
hwif->busproc = &siimage_busproc;
+ if (first) {
+ printk(KERN_INFO "siimage: For full SATA support you should use the libata sata_sil module.\n");
+ first = 0;
+ }
+ }
if (!hwif->dma_base) {
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
@@ -1121,10 +1083,10 @@ static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_devi
}
static struct pci_device_id siimage_pci_tbl[] = {
- { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680), 0},
#ifdef CONFIG_BLK_DEV_IDE_SATA
- { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
- { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
+ { PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112), 1},
+ { PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA), 2},
#endif
{ 0, },
};