aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/i386/kernel/acpi/boot.c76
-rw-r--r--arch/i386/kernel/apic.c15
-rw-r--r--arch/i386/kernel/io_apic.c24
-rw-r--r--arch/i386/kernel/machine_kexec.c23
-rw-r--r--arch/i386/kernel/setup.c350
-rw-r--r--arch/i386/kernel/smpboot.c13
-rw-r--r--arch/i386/mach-generic/probe.c58
-rw-r--r--arch/i386/mm/init.c18
-rw-r--r--include/asm-i386/acpi.h14
-rw-r--r--include/asm-i386/apic.h4
-rw-r--r--include/asm-i386/io_apic.h11
-rw-r--r--include/asm-i386/pgtable.h2
12 files changed, 319 insertions, 289 deletions
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index ee003bc0e8b..87e2ab50b69 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -36,6 +36,8 @@
#include <asm/io.h>
#include <asm/mpspec.h>
+int __initdata acpi_force = 0;
+
#ifdef CONFIG_X86_64
extern void __init clustered_apic_check(void);
@@ -860,8 +862,6 @@ static void __init acpi_process_madt(void)
return;
}
-extern int acpi_force;
-
#ifdef __i386__
static int __init disable_acpi_irq(struct dmi_system_id *d)
@@ -1163,3 +1163,75 @@ int __init acpi_boot_init(void)
return 0;
}
+
+static int __init parse_acpi(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+
+ /* "acpi=off" disables both ACPI table parsing and interpreter */
+ if (strcmp(arg, "off") == 0) {
+ disable_acpi();
+ }
+ /* acpi=force to over-ride black-list */
+ else if (strcmp(arg, "force") == 0) {
+ acpi_force = 1;
+ acpi_ht = 1;
+ acpi_disabled = 0;
+ }
+ /* acpi=strict disables out-of-spec workarounds */
+ else if (strcmp(arg, "strict") == 0) {
+ acpi_strict = 1;
+ }
+ /* Limit ACPI just to boot-time to enable HT */
+ else if (strcmp(arg, "ht") == 0) {
+ if (!acpi_force)
+ disable_acpi();
+ acpi_ht = 1;
+ }
+ /* "acpi=noirq" disables ACPI interrupt routing */
+ else if (strcmp(arg, "noirq") == 0) {
+ acpi_noirq_set();
+ } else {
+ /* Core will printk when we return error. */
+ return -EINVAL;
+ }
+ return 0;
+}
+early_param("acpi", parse_acpi);
+
+/* FIXME: Using pci= for an ACPI parameter is a travesty. */
+static int __init parse_pci(char *arg)
+{
+ if (arg && strcmp(arg, "noacpi") == 0)
+ acpi_disable_pci();
+ return 0;
+}
+early_param("pci", parse_pci);
+
+#ifdef CONFIG_X86_IO_APIC
+static int __init parse_acpi_skip_timer_override(char *arg)
+{
+ acpi_skip_timer_override = 1;
+ return 0;
+}
+early_param("acpi_skip_timer_override", parse_acpi_skip_timer_override);
+#endif /* CONFIG_X86_IO_APIC */
+
+static int __init setup_acpi_sci(char *s)
+{
+ if (!s)
+ return -EINVAL;
+ if (!strcmp(s, "edge"))
+ acpi_sci_flags.trigger = 1;
+ else if (!strcmp(s, "level"))
+ acpi_sci_flags.trigger = 3;
+ else if (!strcmp(s, "high"))
+ acpi_sci_flags.polarity = 1;
+ else if (!strcmp(s, "low"))
+ acpi_sci_flags.polarity = 3;
+ else
+ return -EINVAL;
+ return 0;
+}
+early_param("acpi_sci", setup_acpi_sci);
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index 1a34fc57800..ce75e71b694 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -1372,3 +1372,18 @@ int __init APIC_init_uniprocessor (void)
return 0;
}
+
+static int __init parse_lapic(char *arg)
+{
+ lapic_enable();
+ return 0;
+}
+early_param("lapic", parse_lapic);
+
+static int __init parse_nolapic(char *arg)
+{
+ lapic_disable();
+ return 0;
+}
+early_param("nolapic", parse_nolapic);
+
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index b713f27d7e8..fd0df75cfbd 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -66,7 +66,7 @@ int sis_apic_bug = -1;
*/
int nr_ioapic_registers[MAX_IO_APICS];
-int disable_timer_pin_1 __initdata;
+static int disable_timer_pin_1 __initdata;
/*
* Rough estimation of how many shared IRQs there are, can
@@ -2691,3 +2691,25 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
}
#endif /* CONFIG_ACPI */
+
+static int __init parse_disable_timer_pin_1(char *arg)
+{
+ disable_timer_pin_1 = 1;
+ return 0;
+}
+early_param("disable_timer_pin_1", parse_disable_timer_pin_1);
+
+static int __init parse_enable_timer_pin_1(char *arg)
+{
+ disable_timer_pin_1 = -1;
+ return 0;
+}
+early_param("enable_timer_pin_1", parse_enable_timer_pin_1);
+
+static int __init parse_noapic(char *arg)
+{
+ /* disable IO-APIC */
+ disable_ioapic_setup();
+ return 0;
+}
+early_param("noapic", parse_noapic);
diff --git a/arch/i386/kernel/machine_kexec.c b/arch/i386/kernel/machine_kexec.c
index 6b1ae6ba76f..66c3dc99a65 100644
--- a/arch/i386/kernel/machine_kexec.c
+++ b/arch/i386/kernel/machine_kexec.c
@@ -9,6 +9,7 @@
#include <linux/mm.h>
#include <linux/kexec.h>
#include <linux/delay.h>
+#include <linux/init.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
@@ -209,3 +210,25 @@ NORET_TYPE void machine_kexec(struct kimage *image)
rnk = (relocate_new_kernel_t) reboot_code_buffer;
(*rnk)(page_list, reboot_code_buffer, image->start, cpu_has_pae);
}
+
+/* crashkernel=size@addr specifies the location to reserve for
+ * a crash kernel. By reserving this memory we guarantee
+ * that linux never sets it up as a DMA target.
+ * Useful for holding code to do something appropriate
+ * after a kernel panic.
+ */
+static int __init parse_crashkernel(char *arg)
+{
+ unsigned long size, base;
+ size = memparse(arg, &arg);
+ if (*arg == '@') {
+ base = memparse(arg+1, &arg);
+ /* FIXME: Do I want a sanity check
+ * to validate the memory range?
+ */
+ crashk_res.start = base;
+ crashk_res.end = base + size - 1;
+ }
+ return 0;
+}
+early_param("crashkernel", parse_crashkernel);
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index 71a540362b7..c6e31ed386f 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -96,11 +96,6 @@ unsigned long mmu_cr4_features;
#endif
EXPORT_SYMBOL(acpi_disabled);
-#ifdef CONFIG_ACPI
-int __initdata acpi_force = 0;
-extern acpi_interrupt_flags acpi_sci_flags;
-#endif
-
/* for MCA, but anyone else can use it if they want */
unsigned int machine_id;
#ifdef CONFIG_MCA
@@ -148,7 +143,6 @@ EXPORT_SYMBOL(ist_info);
struct e820map e820;
extern void early_cpu_init(void);
-extern void generic_apic_probe(char *);
extern int root_mountflags;
unsigned long saved_videomode;
@@ -700,238 +694,132 @@ static inline void copy_edd(void)
}
#endif
-static void __init parse_cmdline_early (char ** cmdline_p)
-{
- char c = ' ', *to = command_line, *from = saved_command_line;
- int len = 0;
- int userdef = 0;
+static int __initdata user_defined_memmap = 0;
- /* Save unparsed command line copy for /proc/cmdline */
- saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+/*
+ * "mem=nopentium" disables the 4MB page tables.
+ * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
+ * to <mem>, overriding the bios size.
+ * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from
+ * <start> to <start>+<mem>, overriding the bios size.
+ *
+ * HPA tells me bootloaders need to parse mem=, so no new
+ * option should be mem= [also see Documentation/i386/boot.txt]
+ */
+static int __init parse_mem(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
- for (;;) {
- if (c != ' ')
- goto next_char;
- /*
- * "mem=nopentium" disables the 4MB page tables.
- * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
- * to <mem>, overriding the bios size.
- * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from
- * <start> to <start>+<mem>, overriding the bios size.
- *
- * HPA tells me bootloaders need to parse mem=, so no new
- * option should be mem= [also see Documentation/i386/boot.txt]
+ if (strcmp(arg, "nopentium") == 0) {
+ clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
+ disable_pse = 1;
+ } else {
+ /* If the user specifies memory size, we
+ * limit the BIOS-provided memory map to
+ * that size. exactmap can be used to specify
+ * the exact map. mem=number can be used to
+ * trim the existing memory map.
*/
- if (!memcmp(from, "mem=", 4)) {
- if (to != command_line)
- to--;
- if (!memcmp(from+4, "nopentium", 9)) {
- from += 9+4;
- clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
- disable_pse = 1;
- } else {
- /* If the user specifies memory size, we
- * limit the BIOS-provided memory map to
- * that size. exactmap can be used to specify
- * the exact map. mem=number can be used to
- * trim the existing memory map.
- */
- unsigned long long mem_size;
+ unsigned long long mem_size;
- mem_size = memparse(from+4, &from);
- limit_regions(mem_size);
- userdef=1;
- }
- }
-
- else if (!memcmp(from, "memmap=", 7)) {
- if (to != command_line)
- to--;
- if (!memcmp(from+7, "exactmap", 8)) {
-#ifdef CONFIG_CRASH_DUMP
- /* If we are doing a crash dump, we
- * still need to know the real mem
- * size before original memory map is
- * reset.
- */
- find_max_pfn();
- saved_max_pfn = max_pfn;
-#endif
- from += 8+7;
- e820.nr_map = 0;
- userdef = 1;
- } else {
- /* If the user specifies memory size, we
- * limit the BIOS-provided memory map to
- * that size. exactmap can be used to specify
- * the exact map. mem=number can be used to
- * trim the existing memory map.
- */
- unsigned long long start_at, mem_size;
-
- mem_size = memparse(from+7, &from);
- if (*from == '@') {
- start_at = memparse(from+1, &from);
- add_memory_region(start_at, mem_size, E820_RAM);
- } else if (*from == '#') {
- start_at = memparse(from+1, &from);
- add_memory_region(start_at, mem_size, E820_ACPI);
- } else if (*from == '$') {
- start_at = memparse(from+1, &from);
- add_memory_region(start_at, mem_size, E820_RESERVED);
- } else {
- limit_regions(mem_size);
- userdef=1;
- }
- }
- }
-
- else if (!memcmp(from, "noexec=", 7))
- noexec_setup(from + 7);
+ mem_size = memparse(arg, &arg);
+ limit_regions(mem_size);
+ user_defined_memmap = 1;
+ }
+ return 0;
+}
+early_param("mem", parse_mem);
+static int __init parse_memmap(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
-#ifdef CONFIG_X86_SMP
- /*
- * If the BIOS enumerates physical processors before logical,
- * maxcpus=N at enumeration-time can be used to disable HT.
+ if (strcmp(arg, "exactmap") == 0) {
+#ifdef CONFIG_CRASH_DUMP
+ /* If we are doing a crash dump, we
+ * still need to know the real mem
+ * size before original memory map is
+ * reset.
*/
- else if (!memcmp(from, "maxcpus=", 8)) {
- extern unsigned int maxcpus;
-
- maxcpus = simple_strtoul(from + 8, NULL, 0);
- }
+ find_max_pfn();
+ saved_max_pfn = max_pfn;
#endif
-
-#ifdef CONFIG_ACPI
- /* "acpi=off" disables both ACPI table parsing and interpreter */
- else if (!memcmp(from, "acpi=off", 8)) {
- disable_acpi();
- }
-
- /* acpi=force to over-ride black-list */
- else if (!memcmp(from, "acpi=force", 10)) {
- acpi_force = 1;
- acpi_ht = 1;
- acpi_disabled = 0;
- }
-
- /* acpi=strict disables out-of-spec workarounds */
- else if (!memcmp(from, "acpi=strict", 11)) {
- acpi_strict = 1;
- }
-
- /* Limit ACPI just to boot-time to enable HT */
- else if (!memcmp(from, "acpi=ht", 7)) {
- if (!acpi_force)
- disable_acpi();
- acpi_ht = 1;
- }
-
- /* "pci=noacpi" disable ACPI IRQ routing and PCI scan */
- else if (!memcmp(from, "pci=noacpi", 10)) {
- acpi_disable_pci();
- }
- /* "acpi=noirq" disables ACPI interrupt routing */
- else if (!memcmp(from, "acpi=noirq", 10)) {
- acpi_noirq_set();
+ e820.nr_map = 0;
+ user_defined_memmap = 1;
+ } else {
+ /* If the user specifies memory size, we
+ * limit the BIOS-provided memory map to
+ * that size. exactmap can be used to specify
+ * the exact map. mem=number can be used to
+ * trim the existing memory map.
+ */
+ unsigned long long start_at, mem_size;
+
+ mem_size = memparse(arg, &arg);
+ if (*arg == '@') {
+ start_at = memparse(arg+1, &arg);
+ add_memory_region(start_at, mem_size, E820_RAM);
+ } else if (*arg == '#') {
+ start_at = memparse(arg+1, &arg);
+ add_memory_region(start_at, mem_size, E820_ACPI);
+ } else if (*arg == '$') {
+ start_at = memparse(arg+1, &arg);
+ add_memory_region(start_at, mem_size, E820_RESERVED);
+ } else {
+ limit_regions(mem_size);
+ user_defined_memmap = 1;
}
+ }
+ return 0;
+}
+early_param("memmap", parse_memmap);
- else if (!memcmp(from, "acpi_sci=edge", 13))
- acpi_sci_flags.trigger = 1;
-
- else if (!memcmp(from, "acpi_sci=level", 14))
- acpi_sci_flags.trigger = 3;
-
- else if (!memcmp(from, "acpi_sci=high", 13))
- acpi_sci_flags.polarity = 1;
-
- else if (!memcmp(from, "acpi_sci=low", 12))
- acpi_sci_flags.polarity = 3;
-
-#ifdef CONFIG_X86_IO_APIC
- else if (!memcmp(from, "acpi_skip_timer_override", 24))
- acpi_skip_timer_override = 1;
-
- if (!memcmp(from, "disable_timer_pin_1", 19))
- disable_timer_pin_1 = 1;
- if (!memcmp(from, "enable_timer_pin_1", 18))
- disable_timer_pin_1 = -1;
+#ifdef CONFIG_PROC_VMCORE
+/* elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel.
+ */
+static int __init parse_elfcorehdr(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
- /* disable IO-APIC */
- else if (!memcmp(from, "noapic", 6))
- disable_ioapic_setup();
-#endif /* CONFIG_X86_IO_APIC */
-#endif /* CONFIG_ACPI */
+ elfcorehdr_addr = memparse(arg, &arg);
+ return 0;
+}
+early_param("elfcorehdr", parse_elfcorehdr);
+#endif /* CONFIG_PROC_VMCORE */
-#ifdef CONFIG_X86_LOCAL_APIC
- /* enable local APIC */
- else if (!memcmp(from, "lapic", 5))
- lapic_enable();
+/*
+ * highmem=size forces highmem to be exactly 'size' bytes.
+ * This works even on boxes that have no highmem otherwise.
+ * This also works to reduce highmem size on bigger boxes.
+ */
+static int __init parse_highmem(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
- /* disable local APIC */
- else if (!memcmp(from, "nolapic", 6))
- lapic_disable();
-#endif /* CONFIG_X86_LOCAL_APIC */
+ highmem_pages = memparse(arg, &arg) >> PAGE_SHIFT;
+ return 0;
+}
+early_param("highmem", parse_highmem);
-#ifdef CONFIG_KEXEC
- /* crashkernel=size@addr specifies the location to reserve for
- * a crash kernel. By reserving this memory we guarantee
- * that linux never set's it up as a DMA target.
- * Useful for holding code to do something appropriate
- * after a kernel panic.
- */
- else if (!memcmp(from, "crashkernel=", 12)) {
- unsigned long size, base;
- size = memparse(from+12, &from);
- if (*from == '@') {
- base = memparse(from+1, &from);
- /* FIXME: Do I want a sanity check
- * to validate the memory range?
- */
- crashk_res.start = base;
- crashk_res.end = base + size - 1;
- }
- }
-#endif
-#ifdef CONFIG_PROC_VMCORE
- /* elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel.
- */
- else if (!memcmp(from, "elfcorehdr=", 11))
- elfcorehdr_addr = memparse(from+11, &from);
-#endif
+/*
+ * vmalloc=size forces the vmalloc area to be exactly 'size'
+ * bytes. This can be used to increase (or decrease) the
+ * vmalloc area - the default is 128m.
+ */
+static int __init parse_vmalloc(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
- /*
- * highmem=size forces highmem to be exactly 'size' bytes.
- * This works even on boxes that have no highmem otherwise.
- * This also works to reduce highmem size on bigger boxes.
- */
- else if (!memcmp(from, "highmem=", 8))
- highmem_pages = memparse(from+8, &from) >> PAGE_SHIFT;
-
- /*
- * vmalloc=size forces the vmalloc area to be exactly 'size'
- * bytes. This can be used to increase (or decrease) the
- * vmalloc area - the default is 128m.
- */
- else if (!memcmp(from, "vmalloc=", 8))
- __VMALLOC_RESERVE = memparse(from+8, &from);
-
- next_char:
- c = *(from++);
- if (!c)
- break;
- if (COMMAND_LINE_SIZE <= ++len)
- break;
- *(to++) = c;
- }
- *to = '\0';
- *cmdline_p = command_line;
- if (userdef) {
- printk(KERN_INFO "user-defined physical RAM map:\n");
- print_memory_map("user");
- }
+ __VMALLOC_RESERVE = memparse(arg, &arg);
+ return 0;
}
+early_param("vmalloc", parse_vmalloc);
/*
* Callback for efi_memory_walk.
@@ -1507,17 +1395,15 @@ void __init setup_arch(char **cmdline_p)
data_resource.start = virt_to_phys(_etext);
data_resource.end = virt_to_phys(_edata)-1;
- parse_cmdline_early(cmdline_p);
+ parse_early_param();
-#ifdef CONFIG_EARLY_PRINTK
- {
- char *s = strstr(*cmdline_p, "earlyprintk=");
- if (s) {
- setup_early_printk(strchr(s, '=') + 1);
- printk("early console enabled\n");
- }
+ if (user_defined_memmap) {
+ printk(KERN_INFO "user-defined physical RAM map:\n");
+ print_memory_map("user");
}
-#endif
+
+ strlcpy(command_line, saved_command_line, COMMAND_LINE_SIZE);
+ *cmdline_p = command_line;
max_low_pfn = setup_memory();
@@ -1546,7 +1432,7 @@ void __init setup_arch(char **cmdline_p)
dmi_scan_machine();
#ifdef CONFIG_X86_GENERICARCH
- generic_apic_probe(*cmdline_p);
+ generic_apic_probe();
#endif
if (efi_enabled)
efi_map_memmap();
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index 9367af76ce3..517eb387455 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -1491,3 +1491,16 @@ void __init smp_intr_init(void)
/* IPI for generic function call */
set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
}
+
+/*
+ * If the BIOS enumerates physical processors before logical,
+ * maxcpus=N at enumeration-time can be used to disable HT.
+ */
+static int __init parse_maxcpus(char *arg)
+{
+ extern unsigned int maxcpus;
+
+ maxcpus = simple_strtoul(arg, NULL, 0);
+ return 0;
+}
+early_param("maxcpus", parse_maxcpus);
diff --git a/arch/i386/mach-generic/probe.c b/arch/i386/mach-generic/probe.c
index 793d1b47325..94b1fd9cbe3 100644
--- a/arch/i386/mach-generic/probe.c
+++ b/arch/i386/mach-generic/probe.c
@@ -9,6 +9,7 @@
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
+#include <linux/errno.h>
#include <asm/fixmap.h>
#include <asm/mpspec.h>
#include <asm/apicdef.h>
@@ -29,7 +30,24 @@ struct genapic *apic_probe[] __initdata = {
NULL,
};
-static int cmdline_apic;
+static int cmdline_apic __initdata;
+static int __init parse_apic(char *arg)
+{
+ int i;
+
+ if (!arg)
+ return -EINVAL;
+
+ for (i = 0; apic_probe[i]; i++) {
+ if (!strcmp(apic_probe[i]->name, arg)) {
+ genapic = apic_probe[i];
+ cmdline_apic = 1;
+ return 0;
+ }
+ }
+ return -ENOENT;
+}
+early_param("apic", parse_apic);
void __init generic_bigsmp_probe(void)
{
@@ -48,40 +66,20 @@ void __init generic_bigsmp_probe(void)
}
}
-void __init generic_apic_probe(char *command_line)
+void __init generic_apic_probe(void)
{
- char *s;
- int i;
- int changed = 0;
-
- s = strstr(command_line, "apic=");
- if (s && (s == command_line || isspace(s[-1]))) {
- char *p = strchr(s, ' '), old;
- if (!p)
- p = strchr(s, '\0');
- old = *p;
- *p = 0;
- for (i = 0; !changed && apic_probe[i]; i++) {
- if (!strcmp(apic_probe[i]->name, s+5)) {
- changed = 1;
+ if (!cmdline_apic) {
+ int i;
+ for (i = 0; apic_probe[i]; i++) {
+ if (apic_probe[i]->probe()) {
genapic = apic_probe[i];
+ break;
}
}
- if (!changed)
- printk(KERN_ERR "Unknown genapic `%s' specified.\n", s);
- *p = old;
- cmdline_apic = changed;
- }
- for (i = 0; !changed && apic_probe[i]; i++) {
- if (apic_probe[i]->probe()) {
- changed = 1;
- genapic = apic_probe[i];
- }
+ /* Not visible without early console */
+ if (!apic_probe[i])
+ panic("Didn't find an APIC driver");
}
- /* Not visible without early console */
- if (!changed)
- panic("Didn't find an APIC driver");
-
printk(KERN_INFO "Using APIC driver %s\n", genapic->name);
}
diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c
index d0c2fdf6a4d..951386606d0 100644
--- a/arch/i386/mm/init.c
+++ b/arch/i386/mm/init.c
@@ -435,16 +435,22 @@ u64 __supported_pte_mask __read_mostly = ~_PAGE_NX;
* on Enable
* off Disable
*/
-void __init noexec_setup(const char *str)
+static int __init noexec_setup(char *str)
{
- if (!strncmp(str, "on",2) && cpu_has_nx) {
- __supported_pte_mask |= _PAGE_NX;
- disable_nx = 0;
- } else if (!strncmp(str,"off",3)) {
+ if (!str || !strcmp(str, "on")) {
+ if (cpu_has_nx) {
+ __supported_pte_mask |= _PAGE_NX;
+ disable_nx = 0;
+ }
+ } else if (!strcmp(str,"off")) {
disable_nx = 1;
__supported_pte_mask &= ~_PAGE_NX;
- }
+ } else
+ return -EINVAL;
+
+ return 0;
}
+early_param("noexec", noexec_setup);
int nx_enabled = 0;
#ifdef CONFIG_X86_PAE
diff --git a/include/asm-i386/acpi.h b/include/asm-i386/acpi.h
index 20f52395421..6016632d032 100644
--- a/include/asm-i386/acpi.h
+++ b/include/asm-i386/acpi.h
@@ -131,21 +131,7 @@ static inline void disable_acpi(void)
extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
#ifdef CONFIG_X86_IO_APIC
-extern int skip_ioapic_setup;
extern int acpi_skip_timer_override;
-
-static inline void disable_ioapic_setup(void)
-{
- skip_ioapic_setup = 1;
-}
-
-static inline int ioapic_setup_disabled(void)
-{
- return skip_ioapic_setup;
-}
-
-#else
-static inline void disable_ioapic_setup(void) { }
#endif
static inline void acpi_noirq_set(void) { acpi_noirq = 1; }
diff --git a/include/asm-i386/apic.h b/include/asm-i386/apic.h
index 2c1e371cebb..8c5331ceca7 100644
--- a/include/asm-i386/apic.h
+++ b/include/asm-i386/apic.h
@@ -42,6 +42,8 @@ static inline void lapic_enable(void)
} while (0)
+extern void generic_apic_probe(void);
+
#ifdef CONFIG_X86_LOCAL_APIC
/*
@@ -117,8 +119,6 @@ extern void enable_APIC_timer(void);
extern void enable_NMI_through_LVT0 (void * dummy);
-extern int disable_timer_pin_1;
-
void smp_send_timer_broadcast_ipi(struct pt_regs *regs);
void switch_APIC_timer_to_ipi(void *cpumask);
void switch_ipi_to_APIC_timer(void *cpumask);
diff --git a/include/asm-i386/io_apic.h b/include/asm-i386/io_apic.h
index 5092e819b8a..5d309275a1d 100644
--- a/include/asm-i386/io_apic.h
+++ b/include/asm-i386/io_apic.h
@@ -188,6 +188,16 @@ static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned
/* 1 if "noapic" boot option passed */
extern int skip_ioapic_setup;
+static inline void disable_ioapic_setup(void)
+{
+ skip_ioapic_setup = 1;
+}
+
+static inline int ioapic_setup_disabled(void)
+{
+ return skip_ioapic_setup;
+}
+
/*
* If we use the IO-APIC for IRQ routing, disable automatic
* assignment of PCI IRQ's.
@@ -206,6 +216,7 @@ extern int (*ioapic_renumber_irq)(int ioapic, int irq);
#else /* !CONFIG_X86_IO_APIC */
#define io_apic_assign_pci_irqs 0
+static inline void disable_ioapic_setup(void) { }
#endif
extern int assign_irq_vector(int irq);
diff --git a/include/asm-i386/pgtable.h b/include/asm-i386/pgtable.h
index 09697fec3d2..64140f2f1b9 100644
--- a/include/asm-i386/pgtable.h
+++ b/include/asm-i386/pgtable.h
@@ -391,8 +391,6 @@ extern pte_t *lookup_address(unsigned long address);
static inline int set_kernel_exec(unsigned long vaddr, int enable) { return 0;}
#endif
-extern void noexec_setup(const char *str);
-
#if defined(CONFIG_HIGHPTE)
#define pte_offset_map(dir, address) \
((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE0) + pte_index(address))