diff options
| -rw-r--r-- | drivers/hwmon/adm1021.c | 105 |
1 files changed, 53 insertions, 52 deletions
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index ecbf69484bf..b11e06f644b 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -78,7 +78,6 @@ clearing it. Weird, ey? --Phil */ /* Each client has this additional data */ struct adm1021_data { - struct i2c_client client; struct device *hwmon_dev; enum chips type; @@ -98,23 +97,42 @@ struct adm1021_data { u8 remote_temp_offset_prec; }; -static int adm1021_attach_adapter(struct i2c_adapter *adapter); -static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind); +static int adm1021_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adm1021_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void adm1021_init_client(struct i2c_client *client); -static int adm1021_detach_client(struct i2c_client *client); +static int adm1021_remove(struct i2c_client *client); static struct adm1021_data *adm1021_update_device(struct device *dev); /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */ static int read_only; +static const struct i2c_device_id adm1021_id[] = { + { "adm1021", adm1021 }, + { "adm1023", adm1023 }, + { "max1617", max1617 }, + { "max1617a", max1617a }, + { "thmc10", thmc10 }, + { "lm84", lm84 }, + { "gl523sm", gl523sm }, + { "mc1066", mc1066 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm1021_id); + /* This is the driver that will be inserted */ static struct i2c_driver adm1021_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "adm1021", }, - .attach_adapter = adm1021_attach_adapter, - .detach_client = adm1021_detach_client, + .probe = adm1021_probe, + .remove = adm1021_remove, + .id_table = adm1021_id, + .detect = adm1021_detect, + .address_data = &addr_data, }; static ssize_t show_temp(struct device *dev, @@ -216,13 +234,6 @@ static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2); static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); -static int adm1021_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, adm1021_detect); -} - static struct attribute *adm1021_attributes[] = { &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp1_min.dev_attr.attr, @@ -243,36 +254,21 @@ static const struct attribute_group adm1021_group = { .attrs = adm1021_attributes, }; -static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adm1021_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { + struct i2c_adapter *adapter = client->adapter; int i; - struct i2c_client *client; - struct adm1021_data *data; - int err = 0; const char *type_name = ""; int conv_rate, status, config; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { pr_debug("adm1021: detect failed, " "smbus byte data not supported!\n"); - goto error0; - } - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access adm1021 register values. */ - - if (!(data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL))) { - pr_debug("adm1021: detect failed, kzalloc failed!\n"); - err = -ENOMEM; - goto error0; + return -ENODEV; } - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &adm1021_driver; status = i2c_smbus_read_byte_data(client, ADM1021_REG_STATUS); conv_rate = i2c_smbus_read_byte_data(client, ADM1021_REG_CONV_RATE_R); @@ -284,8 +280,7 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) || (conv_rate & 0xF8) != 0x00) { pr_debug("adm1021: detect failed, " "chip not detected!\n"); - err = -ENODEV; - goto error1; + return -ENODEV; } } @@ -336,24 +331,36 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) type_name = "mc1066"; } pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n", - type_name, i2c_adapter_id(adapter), address); + type_name, i2c_adapter_id(adapter), client->addr); + strlcpy(info->type, type_name, I2C_NAME_SIZE); - /* Fill in the remaining client fields */ - strlcpy(client->name, type_name, I2C_NAME_SIZE); - data->type = kind; - mutex_init(&data->update_lock); + return 0; +} - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto error1; +static int adm1021_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adm1021_data *data; + int err; + + data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL); + if (!data) { + pr_debug("adm1021: detect failed, kzalloc failed!\n"); + err = -ENOMEM; + goto error0; + } + + i2c_set_clientdata(client, data); + data->type = id->driver_data; + mutex_init(&data->update_lock); /* Initialize the ADM1021 chip */ - if (kind != lm84 && !read_only) + if (data->type != lm84 && !read_only) adm1021_init_client(client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &adm1021_group))) - goto error2; + goto error1; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -365,8 +372,6 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) error3: sysfs_remove_group(&client->dev.kobj, &adm1021_group); -error2: - i2c_detach_client(client); error1: kfree(data); error0: @@ -382,17 +387,13 @@ static void adm1021_init_client(struct i2c_client *client) i2c_smbus_write_byte_data(client, ADM1021_REG_CONV_RATE_W, 0x04); } -static int adm1021_detach_client(struct i2c_client *client) +static int adm1021_remove(struct i2c_client *client) { struct adm1021_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &adm1021_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } |