aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/ata/Kconfig9
-rw-r--r--drivers/ata/Makefile1
-rw-r--r--drivers/ata/ahci.c30
-rw-r--r--drivers/ata/ata_generic.c6
-rw-r--r--drivers/ata/ata_piix.c4
-rw-r--r--drivers/ata/libata-acpi.c71
-rw-r--r--drivers/ata/libata-core.c248
-rw-r--r--drivers/ata/libata-eh.c220
-rw-r--r--drivers/ata/libata-scsi.c44
-rw-r--r--drivers/ata/libata-sff.c8
-rw-r--r--drivers/ata/libata.h13
-rw-r--r--drivers/ata/pata_ali.c2
-rw-r--r--drivers/ata/pata_amd.c6
-rw-r--r--drivers/ata/pata_cs5520.c28
-rw-r--r--drivers/ata/pata_cs5530.c2
-rw-r--r--drivers/ata/pata_hpt366.c2
-rw-r--r--drivers/ata/pata_hpt37x.c2
-rw-r--r--drivers/ata/pata_isapnp.c2
-rw-r--r--drivers/ata/pata_it821x.c4
-rw-r--r--drivers/ata/pata_ixp4xx_cf.c7
-rw-r--r--drivers/ata/pata_legacy.c2
-rw-r--r--drivers/ata/pata_oldpiix.c5
-rw-r--r--drivers/ata/pata_opti.c2
-rw-r--r--drivers/ata/pata_optidma.c2
-rw-r--r--drivers/ata/pata_pcmcia.c9
-rw-r--r--drivers/ata/pata_pdc2027x.c2
-rw-r--r--drivers/ata/pata_pdc202xx_old.c2
-rw-r--r--drivers/ata/pata_platform.c1
-rw-r--r--drivers/ata/pata_qdi.c2
-rw-r--r--drivers/ata/pata_rz1000.c1
-rw-r--r--drivers/ata/pata_scc.c1228
-rw-r--r--drivers/ata/pata_serverworks.c2
-rw-r--r--drivers/ata/pata_sil680.c14
-rw-r--r--drivers/ata/pata_sis.c9
-rw-r--r--drivers/ata/pata_sl82c105.c39
-rw-r--r--drivers/ata/pata_via.c2
-rw-r--r--drivers/ata/pata_winbond.c2
-rw-r--r--drivers/ata/pdc_adma.c4
-rw-r--r--drivers/ata/sata_mv.c39
-rw-r--r--drivers/ata/sata_nv.c226
-rw-r--r--drivers/ata/sata_promise.c32
-rw-r--r--drivers/ata/sata_qstor.c4
-rw-r--r--drivers/ata/sata_sil.c12
-rw-r--r--drivers/ata/sata_sil24.c2
-rw-r--r--drivers/ata/sata_sis.c5
-rw-r--r--drivers/ata/sata_svw.c2
-rw-r--r--drivers/ata/sata_sx4.c16
-rw-r--r--drivers/ata/sata_uli.c2
-rw-r--r--drivers/ata/sata_via.c30
-rw-r--r--drivers/ata/sata_vsc.c125
-rw-r--r--drivers/ata/sis.h5
-rw-r--r--include/linux/ata.h8
-rw-r--r--include/linux/libata.h27
53 files changed, 2014 insertions, 558 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 4af0a4bb578..d16b5b0c8b7 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -562,6 +562,15 @@ config PATA_IXP4XX_CF
If unsure, say N.
+config PATA_SCC
+ tristate "Toshiba's Cell Reference Set IDE support"
+ depends on PCI && PPC_IBM_CELL_BLADE
+ help
+ This option enables support for the built-in IDE controller on
+ Toshiba Cell Reference Board.
+
+ If unsure, say N.
+
endif
endmenu
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 74298afbbaa..13d7397e000 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o
obj-$(CONFIG_PATA_SIS) += pata_sis.o
obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o
obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o
+obj-$(CONFIG_PATA_SCC) += pata_scc.o
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
# Should be last but one libata driver
obj-$(CONFIG_ATA_GENERIC) += ata_generic.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6a3543e0624..6d932409aad 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -46,7 +46,7 @@
#include <linux/libata.h>
#define DRV_NAME "ahci"
-#define DRV_VERSION "2.0"
+#define DRV_VERSION "2.1"
enum {
@@ -198,7 +198,6 @@ struct ahci_port_priv {
void *rx_fis;
dma_addr_t rx_fis_dma;
/* for NCQ spurious interrupt analysis */
- int ncq_saw_spurious_sdb_cnt;
unsigned int ncq_saw_d2h:1;
unsigned int ncq_saw_dmas:1;
};
@@ -1160,23 +1159,24 @@ static void ahci_host_intr(struct ata_port *ap)
known_irq = 1;
}
- if (status & PORT_IRQ_SDB_FIS &&
- pp->ncq_saw_spurious_sdb_cnt < 10) {
+ if (status & PORT_IRQ_SDB_FIS) {
/* SDB FIS containing spurious completions might be
- * dangerous, we need to know more about them. Print
- * more of it.
- */
+ * dangerous, whine and fail commands with HSM
+ * violation. EH will turn off NCQ after several such
+ * failures.
+ */
const __le32 *f = pp->rx_fis + RX_FIS_SDB;
- ata_port_printk(ap, KERN_INFO, "Spurious SDB FIS during NCQ "
- "issue=0x%x SAct=0x%x FIS=%08x:%08x%s\n",
- readl(port_mmio + PORT_CMD_ISSUE),
- readl(port_mmio + PORT_SCR_ACT),
- le32_to_cpu(f[0]), le32_to_cpu(f[1]),
- pp->ncq_saw_spurious_sdb_cnt < 10 ?
- "" : ", shutting up");
+ ata_ehi_push_desc(ehi, "spurious completion during NCQ "
+ "issue=0x%x SAct=0x%x FIS=%08x:%08x",
+ readl(port_mmio + PORT_CMD_ISSUE),
+ readl(port_mmio + PORT_SCR_ACT),
+ le32_to_cpu(f[0]), le32_to_cpu(f[1]));
+
+ ehi->err_mask |= AC_ERR_HSM;
+ ehi->action |= ATA_EH_SOFTRESET;
+ ata_port_freeze(ap);
- pp->ncq_saw_spurious_sdb_cnt++;
known_irq = 1;
}
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index be66ea08da5..f48b4883c93 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -26,7 +26,7 @@
#include <linux/libata.h>
#define DRV_NAME "ata_generic"
-#define DRV_VERSION "0.2.10"
+#define DRV_VERSION "0.2.11"
/*
* A generic parallel ATA driver using libata
@@ -90,10 +90,10 @@ static int generic_set_mode(struct ata_port *ap, struct ata_device **unused)
/* We do need the right mode information for DMA or PIO
and this comes from the current configuration flags */
if (dma_enabled & (1 << (5 + i))) {
- dev->xfer_mode = XFER_MW_DMA_0;
- dev->xfer_shift = ATA_SHIFT_MWDMA;
+ ata_id_to_dma_mode(dev, XFER_MW_DMA_0);
dev->flags &= ~ATA_DFLAG_PIO;
} else {
+ ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
dev->flags |= ATA_DFLAG_PIO;
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 4d716c7347e..61572d8c78a 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -93,7 +93,7 @@
#include <linux/libata.h>
#define DRV_NAME "ata_piix"
-#define DRV_VERSION "2.00ac7"
+#define DRV_VERSION "2.10"
enum {
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
@@ -169,8 +169,6 @@ static const struct pci_device_id piix_pci_tbl[] = {
/* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */
/* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */
{ 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
- { 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
- { 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
/* Intel PIIX4 */
{ 0x8086, 0x7199, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
/* Intel PIIX4 */
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index b4e8be5d292..d14a48e75f1 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -294,9 +294,8 @@ static int do_drive_get_GTF(struct ata_port *ap, int ix,
return 0;
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG,
- "%s: ENTER: ap->id: %d, port#: %d\n",
- __FUNCTION__, ap->id, ap->port_no);
+ ata_dev_printk(atadev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
+ __FUNCTION__, ap->port_no);
if (!ata_dev_enabled(atadev) || (ap->flags & ATA_FLAG_DISABLED)) {
if (ata_msg_probe(ap))
@@ -456,6 +455,9 @@ static void taskfile_load_raw(struct ata_port *ap,
struct ata_device *atadev,
const struct taskfile_array *gtf)
{
+ struct ata_taskfile tf;
+ unsigned int err;
+
if (ata_msg_probe(ap))
ata_dev_printk(atadev, KERN_DEBUG, "%s: (0x1f1-1f7): hex: "
"%02x %02x %02x %02x %02x %02x %02x\n",
@@ -468,35 +470,25 @@ static void taskfile_load_raw(struct ata_port *ap,
&& (gtf->tfa[6] == 0))
return;
- if (ap->ops->qc_issue) {
- struct ata_taskfile tf;
- unsigned int err;
-
- ata_tf_init(atadev, &tf);
-
- /* convert gtf to tf */
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */
- tf.protocol = atadev->class == ATA_DEV_ATAPI ?
- ATA_PROT_ATAPI_NODATA : ATA_PROT_NODATA;
- tf.feature = gtf->tfa[0]; /* 0x1f1 */
- tf.nsect = gtf->tfa[1]; /* 0x1f2 */
- tf.lbal = gtf->tfa[2]; /* 0x1f3 */
- tf.lbam = gtf->tfa[3]; /* 0x1f4 */
- tf.lbah = gtf->tfa[4]; /* 0x1f5 */
- tf.device = gtf->tfa[5]; /* 0x1f6 */
- tf.command = gtf->tfa[6]; /* 0x1f7 */
-
- err = ata_exec_internal(atadev, &tf, NULL, DMA_NONE, NULL, 0);
- if (err && ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_ERR,
- "%s: ata_exec_internal failed: %u\n",
- __FUNCTION__, err);
- } else
- if (ata_msg_warn(ap))
- ata_dev_printk(atadev, KERN_WARNING,
- "%s: SATA driver is missing qc_issue function"
- " entry points\n",
- __FUNCTION__);
+ ata_tf_init(atadev, &tf);
+
+ /* convert gtf to tf */
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */
+ tf.protocol = atadev->class == ATA_DEV_ATAPI ?
+ ATA_PROT_ATAPI_NODATA : ATA_PROT_NODATA;
+ tf.feature = gtf->tfa[0]; /* 0x1f1 */
+ tf.nsect = gtf->tfa[1]; /* 0x1f2 */
+ tf.lbal = gtf->tfa[2]; /* 0x1f3 */
+ tf.lbam = gtf->tfa[3]; /* 0x1f4 */
+ tf.lbah = gtf->tfa[4]; /* 0x1f5 */
+ tf.device = gtf->tfa[5]; /* 0x1f6 */
+ tf.command = gtf->tfa[6]; /* 0x1f7 */
+
+ err = ata_exec_internal(atadev, &tf, NULL, DMA_NONE, NULL, 0);
+ if (err && ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_ERR,
+ "%s: ata_exec_internal failed: %u\n",
+ __FUNCTION__, err);
}
/**
@@ -521,9 +513,8 @@ static int do_drive_set_taskfiles(struct ata_port *ap,
struct taskfile_array *gtf;
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG,
- "%s: ENTER: ap->id: %d, port#: %d\n",
- __FUNCTION__, ap->id, ap->port_no);
+ ata_dev_printk(atadev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
+ __FUNCTION__, ap->port_no);
if (noacpi || !(ap->cbl == ATA_CBL_SATA))
return 0;
@@ -627,9 +618,8 @@ int ata_acpi_push_id(struct ata_port *ap, unsigned int ix)
return 0;
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG,
- "%s: ap->id: %d, ix = %d, port#: %d\n",
- __FUNCTION__, ap->id, ix, ap->port_no);
+ ata_dev_printk(atadev, KERN_DEBUG, "%s: ix = %d, port#: %d\n",
+ __FUNCTION__, ix, ap->port_no);
/* Don't continue if not a SATA device. */
if (!(ap->cbl == ATA_CBL_SATA)) {
@@ -685,9 +675,8 @@ int ata_acpi_push_id(struct ata_port *ap, unsigned int ix)
if (err < 0) {
if (ata_msg_probe(ap))
ata_dev_printk(atadev, KERN_DEBUG,
- "ata%u(%u): %s _SDD error: status = 0x%x\n",
- ap->id, ap->device->devno,
- __FUNCTION__, status);
+ "%s _SDD error: status = 0x%x\n",
+ __FUNCTION__, status);
}
/* always return success */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e900c5edefc..c8d44a7c403 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -59,7 +59,7 @@
#include "libata.h"
-#define DRV_VERSION "2.10" /* must be exactly four chars */
+#define DRV_VERSION "2.20" /* must be exactly four chars */
/* debounce timing parameters in msecs { interval, duration, timeout } */
@@ -72,7 +72,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev,
static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
static void ata_dev_xfermask(struct ata_device *dev);
-static unsigned int ata_unique_id = 1;
+static unsigned int ata_print_id = 1;
static struct workqueue_struct *ata_wq;
struct workqueue_struct *ata_aux_wq;
@@ -315,9 +315,7 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf->flags |= tf_flags;
- if ((dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ_OFF |
- ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ &&
- likely(tag != ATA_TAG_INTERNAL)) {
+ if (ata_ncq_enabled(dev) && likely(tag != ATA_TAG_INTERNAL)) {
/* yay, NCQ */
if (!lba_48_ok(block, n_block))
return -ERANGE;
@@ -600,6 +598,8 @@ void ata_dev_disable(struct ata_device *dev)
{
if (ata_dev_enabled(dev) && ata_msg_drv(dev->ap)) {
ata_dev_printk(dev, KERN_WARNING, "disabled\n");
+ ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 |
+ ATA_DNXFER_QUIET);
dev->class++;
}
}
@@ -708,7 +708,7 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf)
* Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE.
*/
-static unsigned int
+unsigned int
ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err)
{
struct ata_taskfile tf;
@@ -824,6 +824,48 @@ static u64 ata_id_n_sectors(const u16 *id)
}
/**
+ * ata_id_to_dma_mode - Identify DMA mode from id block
+ * @dev: device to identify
+ * @mode: mode to assume if we cannot tell
+ *
+ * Set up the timing values for the device based upon the identify
+ * reported values for the DMA mode. This function is used by drivers
+ * which rely upon firmware configured modes, but wish to report the
+ * mode correctly when possible.
+ *
+ * In addition we emit similarly formatted messages to the default
+ * ata_dev_set_mode handler, in order to provide consistency of
+ * presentation.
+ */
+
+void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown)
+{
+ unsigned int mask;
+ u8 mode;
+
+ /* Pack the DMA modes */
+ mask = ((dev->id[63] >> 8) << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA;
+ if (dev->id[53] & 0x04)
+ mask |= ((dev->id[88] >> 8) << ATA_SHIFT_UDMA) & ATA_MASK_UDMA;
+
+ /* Select the mode in use */
+ mode = ata_xfer_mask2mode(mask);
+
+ if (mode != 0) {
+ ata_dev_printk(dev, KERN_INFO, "configured for %s\n",
+ ata_mode_string(mask));
+ } else {
+ /* SWDMA perhaps ? */
+ mode = unknown;
+ ata_dev_printk(dev, KERN_INFO, "configured for DMA\n");
+ }
+
+ /* Configure the device reporting */
+ dev->xfer_mode = mode;
+ dev->xfer_shift = ata_xfer_mode2shift(mode);
+}
+
+/**
* ata_noop_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
* @device: ATA device (numbered from zero) to select
@@ -891,8 +933,8 @@ void ata_dev_select(struct ata_port *ap, unsigned int device,
unsigned int wait, unsigned int can_sleep)
{
if (ata_msg_probe(ap))
- ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, ata%u: "
- "device %u, wait %u\n", ap->id, device, wait);
+ ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, "
+ "device %u, wait %u\n", device, wait);
if (wait)
ata_wait_idle(ap);
@@ -1392,8 +1434,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
int rc;
if (ata_msg_ctl(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n",
- __FUNCTION__, ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
@@ -1430,7 +1471,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
if (err_mask) {
if (err_mask & AC_ERR_NODEV_HINT) {
DPRINTK("ata%u.%d: NODEV after polling detection\n",
- ap->id, dev->devno);
+ ap->print_id, dev->devno);
return -ENOENT;
}
@@ -1558,15 +1599,13 @@ int ata_dev_configure(struct ata_device *dev)
int rc;
if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
- ata_dev_printk(dev, KERN_INFO,
- "%s: ENTER/EXIT (host %u, dev %u) -- nodev\n",
- __FUNCTION__, ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT -- nodev\n",
+ __FUNCTION__);
return 0;
}
if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n",
- __FUNCTION__, ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
/* set _SDD */
rc = ata_acpi_push_id(ap, dev->devno);
@@ -1610,8 +1649,9 @@ int ata_dev_configure(struct ata_device *dev)
if (dev->class == ATA_DEV_ATA) {
if (ata_id_is_cfa(id)) {
if (id[162] & 1) /* CPRM may make this media unusable */
- ata_dev_printk(dev, KERN_WARNING, "ata%u: device %u supports DRM functions and may not be fully accessable.\n",
- ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_WARNING,
+ "supports DRM functions and may "
+ "not be fully accessable.\n");
snprintf(revbuf, 7, "CFA");
}
else
@@ -1679,7 +1719,7 @@ int ata_dev_configure(struct ata_device *dev)
"%s: %s, %s, max %s\n",
revbuf, modelbuf, fwrevbuf,
ata_mode_string(xfer_mask));
- ata_dev_printk(dev, KERN_INFO,
+ ata_dev_printk(dev, KERN_INFO,
"%Lu sectors, multi %u, CHS %u/%u/%u\n",
(unsigned long long)dev->n_sectors,
dev->multi_count, dev->cylinders,
@@ -1778,7 +1818,7 @@ int ata_bus_probe(struct ata_port *ap)
{
unsigned int classes[ATA_MAX_DEVICES];
int tries[ATA_MAX_DEVICES];
- int i, rc, down_xfermask;
+ int i, rc;
struct ata_device *dev;
ata_port_probe(ap);
@@ -1787,8 +1827,6 @@ int ata_bus_probe(struct ata_port *ap)
tries[i] = ATA_PROBE_MAX_TRIES;
retry:
- down_xfermask = 0;
-
/* reset and determine device classes */
ap->ops->phy_reset(ap);
@@ -1836,10 +1874,8 @@ int ata_bus_probe(struct ata_port *ap)
/* configure transfer mode */
rc = ata_set_mode(ap, &dev);
- if (rc) {
- down_xfermask = 1;
+ if (rc)
goto fail;
- }
for (i = 0; i < ATA_MAX_DEVICES; i++)
if (ata_dev_enabled(&ap->device[i]))
@@ -1851,25 +1887,29 @@ int ata_bus_probe(struct ata_port *ap)
return -ENODEV;
fail:
+ tries[dev->devno]--;
+
switch (rc) {
case -EINVAL:
- case -ENODEV:
+ /* eeek, something went very wrong, give up */
tries[dev->devno] = 0;
break;
+
+ case -ENODEV:
+ /* give it just one more chance */
+ tries[dev->devno] = min(tries[dev->devno], 1);
case -EIO:
- sata_down_spd_limit(ap);
- /* fall through */
- default:
- tries[dev->devno]--;
- if (down_xfermask &&
- ata_down_xfermask_limit(dev, tries[dev->devno] == 1))
- tries[dev->devno] = 0;
+ if (tries[dev->devno] == 1) {
+ /* This is the last chance, better to slow
+ * down than lose it.
+ */
+ sata_down_spd_limit(ap);
+ ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
+ }
}
- if (!tries[dev->devno]) {
- ata_down_xfermask_limit(dev, 1);
+ if (!tries[dev->devno])
ata_dev_disable(dev);
- }
goto retry;
}
@@ -2300,7 +2340,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
/**
* ata_down_xfermask_limit - adjust dev xfer masks downward
* @dev: Device to adjust xfer masks
- * @force_pio0: Force PIO0
+ * @sel: ATA_DNXFER_* selector
*
* Adjust xfer masks of @dev downward. Note that this function
* does not apply the change. Invoking ata_set_mode() afterwards
@@ -2312,37 +2352,78 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
* RETURNS:
* 0 on success, negative errno on failure
*/
-int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0)
+int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel)
{
- unsigned long xfer_mask;
- int highbit;
+ char buf[32];
+ unsigned int orig_mask, xfer_mask;
+ unsigned int pio_mask, mwdma_mask, udma_mask;
+ int quiet, highbit;
- xfer_mask = ata_pack_xfermask(dev->pio_mask, dev->mwdma_mask,
- dev->udma_mask);
+ quiet = !!(sel & ATA_DNXFER_QUIET);
+ sel &= ~ATA_DNXFER_QUIET;
- if (!xfer_mask)
- goto fail;
- /* don't gear down to MWDMA from UDMA, go directly to PIO */
- if (xfer_mask & ATA_MASK_UDMA)
- xfer_mask &= ~ATA_MASK_MWDMA;
+ xfer_mask = orig_mask = ata_pack_xfermask(dev->pio_mask,
+ dev->mwdma_mask,
+ dev->udma_mask);
+ ata_unpack_xfermask(xfer_mask, &pio_mask, &mwdma_mask, &udma_mask);
- highbit = fls(xfer_mask) - 1;
- xfer_mask &= ~(1 << highbit);
- if (force_pio0)
- xfer_mask &= 1 << ATA_SHIFT_PIO;
- if (!xfer_mask)
- goto fail;
+ switch (sel) {
+ case ATA_DNXFER_PIO:
+ highbit = fls(pio_mask) - 1;
+ pio_mask &= ~(1 << highbit);
+ break;
+
+ case ATA_DNXFER_DMA:
+ if (udma_mask) {
+ highbit = fls(udma_mask) - 1;
+ udma_mask &= ~(1 << highbit);
+ if (!udma_mask)
+ return -ENOENT;
+ } else if (mwdma_mask) {
+ highbit = fls(mwdma_mask) - 1;
+ mwdma_mask &= ~(1 << highbit);
+ if (!mwdma_mask)
+ return -ENOENT;
+ }
+ break;
+
+ case ATA_DNXFER_40C:
+ udma_mask &= ATA_UDMA_MASK_40C;
+ break;
+
+ case ATA_DNXFER_FORCE_PIO0:
+ pio_mask &= 1;
+ case ATA_DNXFER_FORCE_PIO:
+ mwdma_mask = 0;
+ udma_mask = 0;
+ break;
+
+ default:
+ BUG();
+ }
+
+ xfer_mask &= ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
+
+ if (!(xfer_mask & ATA_MASK_PIO) || xfer_mask == orig_mask)
+ return -ENOENT;
+
+ if (!quiet) {
+ if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA))
+ snprintf(buf, sizeof(buf), "%s:%s",
+ ata_mode_string(xfer_mask),
+ ata_mode_string(xfer_mask & ATA_MASK_PIO));
+ else
+ snprintf(buf, sizeof(buf), "%s",
+ ata_mode_string(xfer_mask));
+
+ ata_dev_printk(dev, KERN_WARNING,
+ "limiting speed to %s\n", buf);
+ }
ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
&dev->udma_mask);
- ata_dev_printk(dev, KERN_WARNING, "limiting speed to %s\n",
- ata_mode_string(xfer_mask));
-
return 0;
-
- fail:
- return -EINVAL;
}
static int ata_dev_set_mode(struct ata_device *dev)
@@ -2609,7 +2690,7 @@ static unsigned int ata_bus_softreset(struct ata_port *ap,
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- DPRINTK("ata%u: bus reset via SRST\n", ap->id);
+ DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
/* software reset. causes dev0 to be selected */
iowrite8(ap->ctl, ioaddr->ctl_addr);
@@ -2669,7 +2750,7 @@ void ata_bus_reset(struct ata_port *ap)
u8 err;
unsigned int dev0, dev1 = 0, devmask = 0;
- DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no);
+ DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no);
/* determine if device 0/1 are present */
if (ap->flags & ATA_FLAG_SATA_RESET)
@@ -3256,7 +3337,6 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "WPI CDD-820", NULL, ATA_HORKAGE_NODMA },
{ "SAMSUNG CD-ROM SC-148C", NULL, ATA_HORKAGE_NODMA },
{ "SAMSUNG CD-ROM SC", NULL, ATA_HORKAGE_NODMA },
- { "SanDisk SDP3B-64", NULL, ATA_HORKAGE_NODMA },
{ "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA },
{ "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA },
{ "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA },
@@ -3739,7 +3819,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc)
struct scatterlist *lsg = &sg[qc->n_elem - 1];
int n_elem, pre_n_elem, dir, trim_sg = 0;
- VPRINTK("ENTER, ata%u\n", ap->id);
+ VPRINTK("ENTER, ata%u\n", ap->print_id);
WARN_ON(!(qc->flags & ATA_QCFLAG_SG));
/* we must lengthen transfers to end on a 32-bit boundary */
@@ -4140,7 +4220,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc)
if (do_write != i_write)
goto err_out;
- VPRINTK("ata%u: xfering %d bytes\n", ap->id, bytes);
+ VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes);
__atapi_pio_bytes(qc, bytes);
@@ -4257,7 +4337,7 @@ int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
fsm_start:
DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
- ap->id, qc->tf.protocol, ap->hsm_task_state, status);
+ ap->print_id, qc->tf.protocol, ap->hsm_task_state, status);
switch (ap->hsm_task_state) {
case HSM_ST_FIRST:
@@ -4290,8 +4370,8 @@ fsm_start:
* let the EH abort the command or reset the device.
*/
if (unlikely(status & (ATA_ERR | ATA_DF))) {
- printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n",
- ap->id, status);
+ ata_port_printk(ap, KERN_WARNING, "DRQ=1 with device "
+ "error, dev_stat 0x%X\n", status);
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -4348,8 +4428,9 @@ fsm_start:
* let the EH abort the command or reset the device.
*/
if (unlikely(status & (ATA_ERR | ATA_DF))) {
- printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n",
- ap->id, status);
+ ata_port_printk(ap, KERN_WARNING, "DRQ=1 with "
+ "device error, dev_stat 0x%X\n",
+ status);
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -4435,7 +4516,7 @@ fsm_start:
/* no more data to transfer */
DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n",
- ap->id, qc->dev->devno, status);
+ ap->print_id, qc->dev->devno, status);
WARN_ON(qc->err_mask);
@@ -4977,7 +5058,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap,
u8 status, host_stat = 0;
VPRINTK("ata%u: protocol %d task_state %d\n",
- ap->id, qc->tf.protocol, ap->hsm_task_state);
+ ap->print_id, qc->tf.protocol, ap->hsm_task_state);
/* Check whether we are expecting interrupt in this state */
switch (ap->hsm_task_state) {
@@ -4998,7 +5079,8 @@ inline unsigned int ata_host_intr (struct ata_port *ap,
qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
/* check status of DMA engine */
host_stat = ap->ops->bmdma_status(ap);
- VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat);
+ VPRINTK("ata%u: host_stat 0x%X\n",
+ ap->print_id, host_stat);
/* if it's not our irq... */
if (!(host_stat & ATA_DMA_INTR))
@@ -5457,7 +5539,7 @@ void ata_port_init(struct ata_port *ap, struct ata_host *host,
ap->lock = &host->lock;
ap->flags = ATA_FLAG_DISABLED;
- ap->id = ata_unique_id++;
+ ap->print_id = ata_print_id++;
ap->ctl = ATA_DEVCTL_OBS;
ap->host = host;
ap->dev = ent->dev;
@@ -5528,7 +5610,7 @@ static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost)
{
ap->scsi_host = shost;
- shost->unique_id = ap->id;
+ shost->unique_id = ap->print_id;
shost->max_id = 16;
shost->max_lun = 1;
shost->max_channel = 1;
@@ -5792,9 +5874,9 @@ int ata_device_add(const struct ata_probe_ent *ent)
/* wait for EH to finish */
ata_port_wait_eh(ap);
} else {
- DPRINTK("ata%u: bus probe begin\n", ap->id);
+ DPRINTK("ata%u: bus probe begin\n", ap->print_id);
rc = ata_bus_probe(ap);
- DPRINTK("ata%u: bus probe end\n", ap->id);
+ DPRINTK("ata%u: bus probe end\n", ap->print_id);
if (rc) {
/* FIXME: do something useful here?
@@ -5905,11 +5987,7 @@ ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)
{
struct ata_probe_ent *probe_ent;
- /* XXX - the following if can go away once all LLDs are managed */
- if (!list_empty(&dev->devres_head))
- probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
- else
- probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
+ probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
if (!probe_ent) {
printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
kobject_name(&(dev->kobj)));
@@ -6015,11 +6093,10 @@ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
pci_save_state(pdev);
+ pci_disable_device(pdev);
- if (mesg.event == PM_EVENT_SUSPEND) {
- pci_disable_device(pdev);
+ if (mesg.event == PM_EVENT_SUSPEND)
pci_set_power_state(pdev, PCI_D3hot);
- }
}
int ata_pci_device_do_resume(struct pci_dev *pdev)
@@ -6241,6 +6318,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh);
EXPORT_SYMBOL_GPL(ata_bmdma_error_handler);
EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
EXPORT_SYMBOL_GPL(ata_port_probe);
+EXPORT_SYMBOL_GPL(ata_dev_disable);
EXPORT_SYMBOL_GPL(sata_set_spd);
EXPORT_SYMBOL_GPL(sata_phy_debounce);
EXPORT_SYMBOL_GPL(sata_phy_resume);
@@ -6275,6 +6353,7 @@ EXPORT_SYMBOL_GPL(ata_host_suspend);
EXPORT_SYMBOL_GPL(ata_host_resume);
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
+EXPORT_SYMBOL_GPL(ata_id_to_dma_mode);
EXPORT_SYMBOL_GPL(ata_device_blacklisted);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
@@ -6311,3 +6390,4 @@ EXPORT_SYMBOL_GPL(ata_irq_on);
EXPORT_SYMBOL_GPL(ata_dummy_irq_on);
EXPORT_SYMBOL_GPL(ata_irq_ack);
EXPORT_SYMBOL_GPL(ata_dummy_irq_ack);
+EXPORT_SYMBOL_GPL(ata_dev_try_classify);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 52c85af7fe9..cad0d6db6df 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -44,6 +44,12 @@
#include "libata.h"
+enum {
+ ATA_EH_SPDN_NCQ_OFF = (1 << 0),
+ ATA_EH_SPDN_SPEED_DOWN = (1 << 1),
+ ATA_EH_SPDN_FALLBACK_TO_PIO = (1 << 2),
+};
+
static void __ata_port_freeze(struct ata_port *ap);
static void ata_eh_finish(struct ata_port *ap);
static void ata_eh_handle_port_suspend(struct ata_port *ap);
@@ -65,12 +71,9 @@ static void ata_ering_record(struct ata_ering *ering, int is_io,
ent->timestamp = get_jiffies_64();
}
-static struct ata_ering_entry * ata_ering_top(struct ata_ering *ering)
+static void ata_ering_clear(struct ata_ering *ering)
{
- struct ata_ering_entry *ent = &ering->ring[ering->cursor];
- if (!ent->err_mask)
- return NULL;
- return ent;
+ memset(ering, 0, sizeof(*ering));
}
static int ata_ering_map(struct ata_ering *ering,
@@ -585,7 +588,7 @@ static void __ata_port_freeze(struct ata_port *ap)
ap->pflags |= ATA_PFLAG_FROZEN;
- DPRINTK("ata%u port frozen\n", ap->id);
+ DPRINTK("ata%u port frozen\n", ap->print_id);
}
/**
@@ -658,7 +661,7 @@ void ata_eh_thaw_port(struct ata_port *ap)
spin_unlock_irqrestore(ap->lock, flags);
- DPRINTK("ata%u port thawed\n", ap->id);
+ DPRINTK("ata%u port thawed\n", ap->print_id);
}
static void ata_eh_scsidone(struct scsi_cmnd *scmd)
@@ -1159,87 +1162,99 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
return action;
}
-static int ata_eh_categorize_ering_entry(struct ata_ering_entry *ent)
+static int ata_eh_categorize_error(int is_io, unsigned int err_mask)
{
- if (ent->err_mask & (AC_ERR_ATA_BUS | AC_ERR_TIMEOUT))
+ if (err_mask & AC_ERR_ATA_BUS)
return 1;
- if (ent->is_io) {
- if (ent->err_mask & AC_ERR_HSM)
- return 1;
- if ((ent->err_mask &
- (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV)
+ if (err_mask & AC_ERR_TIMEOUT)
+ return 2;
+
+ if (is_io) {
+ if (err_mask & AC_ERR_HSM)
return 2;
+ if ((err_mask &
+ (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV)
+ return 3;
}
return 0;
}
-struct speed_down_needed_arg {
+struct speed_down_verdict_arg {
u64 since;
- int nr_errors[3];
+ int nr_errors[4];
};
-static int speed_down_needed_cb(struct ata_ering_entry *ent, void *void_arg)
+static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg)
{
- struct speed_down_needed_arg *arg = void_arg;
+ struct speed_down_verdict_arg *arg = void_arg;
+ int cat = ata_eh_categorize_error(ent->is_io, ent->err_mask);
if (ent->timestamp < arg->since)
return -1;
- arg->nr_errors[ata_eh_categorize_ering_entry(ent)]++;
+ arg->nr_errors[cat]++;
return 0;
}
/**
- * ata_eh_speed_down_needed - Determine wheter speed down is necessary
+ * ata_eh_speed_down_verdict - Determine speed down verdict
* @dev: Device of interest
*
* This function examines error ring of @dev and determines
- * whether speed down is necessary. Speed down is necessary if
- * there have been more than 3 of Cat-1 errors or 10 of Cat-2
- * errors during last 15 minutes.
+ * whether NCQ needs to be turned off, transfer speed should be
+ * stepped down, or falling back to PIO is necessary.
*
- * Cat-1 errors are ATA_BUS, TIMEOUT for any command and HSM
- * violation for known supported commands.
+ * Cat-1 is ATA_BUS error for any command.
*
- * Cat-2 errors are unclassified DEV error for known supported
+ * Cat-2 is TIMEOUT for any command or HSM violation for known
+ * supported commands.
+ *
+ * Cat-3 is is unclassified DEV error for known supported
* command.
*
+ * NCQ needs to be turned off if there have been more than 3
+ * Cat-2 + Cat-3 errors during last 10 minutes.
+ *
+ * Speed down is necessary if there have been more than 3 Cat-1 +
+ * Cat-2 errors or 10 Cat-3 errors during last 10 minutes.
+ *
+ * Falling back to PIO mode is necessary if there have been more
+ * than 10 Cat-1 + Cat-2 + Cat-3 errors during last 5 minutes.
+ *
* LOCKING:
* Inherited from caller.
*
* RETURNS:
- * 1 if speed down is necessary, 0 otherwise
+ * OR of ATA_EH_SPDN_* flags.
*/
-static int ata_eh_speed_down_needed(struct ata_device *dev)
+static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev)
{
- const u64 interval = 15LLU * 60 * HZ;
- static const int err_limits[3] = { -1, 3, 10 };
- struct speed_down_needed_arg arg;
- struct ata_ering_entry *ent;
- int err_cat;
- u64 j64;
+ const u64 j5mins = 5LLU * 60 * HZ, j10mins = 10LLU * 60 * HZ;
+ u64 j64 = get_jiffies_64();
+ struct speed_down_verdict_arg arg;
+ unsigned int verdict = 0;
- ent = ata_ering_top(&dev->ering);
- if (!ent)
- return 0;
+ /* scan past 10 mins of error history */
+ memset(&arg, 0, sizeof(arg));
+ arg.since = j64 - min(j64, j10mins);
+ ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg);
- err_cat = ata_eh_categorize_ering_entry(ent);
- if (err_cat == 0)
- return 0;
+ if (arg.nr_errors[2] + arg.nr_errors[3] > 3)
+ verdict |= ATA_EH_SPDN_NCQ_OFF;
+ if (arg.nr_errors[1] + arg.nr_errors[2] > 3 || arg.nr_errors[3] > 10)
+ verdict |= ATA_EH_SPDN_SPEED_DOWN;
+ /* scan past 3 mins of error history */
memset(&arg, 0, sizeof(arg));
+ arg.since = j64 - min(j64, j5mins);
+ ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg);
- j64 = get_jiffies_64();
- if (j64 >= interval)
- arg.since = j64 - interval;
- else
- arg.since = 0;
-
- ata_ering_map(&dev->ering, speed_down_needed_cb, &arg);
+ if (arg.nr_errors[1] + arg.nr_errors[2] + arg.nr_errors[3] > 10)
+ verdict |= ATA_EH_SPDN_FALLBACK_TO_PIO;
- return arg.nr_errors[err_cat] > err_limits[err_cat];
+ return verdict;
}
/**
@@ -1257,31 +1272,80 @@ static int ata_eh_speed_down_needed(struct ata_device *dev)
* Kernel thread context (may sleep).
*
* RETURNS:
- * 0 on success, -errno otherwise
+ * Determined recovery action.
*/
-static int ata_eh_speed_down(struct ata_device *dev, int is_io,
- unsigned int err_mask)
+static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io,
+ unsigned int err_mask)
{
- if (!err_mask)
+ unsigned int verdict;
+ unsigned int action = 0;
+
+ /* don't bother if Cat-0 error */
+ if (ata_eh_categorize_error(is_io, err_mask) == 0)
return 0;
/* record error and determine whether speed down is necessary */
ata_ering_record(&dev->ering, is_io, err_mask);
+ verdict = ata_eh_speed_down_verdict(dev);
- if (!ata_eh_speed_down_needed(dev))
- return 0;
+ /* turn off NCQ? */
+ if ((verdict & ATA_EH_SPDN_NCQ_OFF) &&
+ (dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ |
+ ATA_DFLAG_NCQ_OFF)) == ATA_DFLAG_NCQ) {
+ dev->flags |= ATA_DFLAG_NCQ_OFF;
+ ata_dev_printk(dev, KERN_WARNING,
+ "NCQ disabled due to excessive errors\n");
+ goto done;
+ }
- /* speed down SATA link speed if possible */
- if (sata_down_spd_limit(dev->ap) == 0)
- return ATA_EH_HARDRESET;
+ /* speed down? */
+ if (verdict & ATA_EH_SPDN_SPEED_DOWN) {
+ /* speed down SATA link speed if possible */
+ if (sata_down_spd_limit(dev->ap) == 0) {
+ action |= ATA_EH_HARDRESET;
+ goto done;
+ }
- /* lower transfer mode */
- if (ata_down_xfermask_limit(dev, 0) == 0)
- return ATA_EH_SOFTRESET;
+ /* lower transfer mode */
+ if (dev->spdn_cnt < 2) {
+ static const int dma_dnxfer_sel[] =
+ { ATA_DNXFER_DMA, ATA_DNXFER_40C };
+ static const int pio_dnxfer_sel[] =
+ { ATA_DNXFER_PIO, ATA_DNXFER_FORCE_PIO0 };
+ int sel;
+
+ if (dev->xfer_shift != ATA_SHIFT_PIO)
+ sel = dma_dnxfer_sel[dev->spdn_cnt];
+ else
+ sel = pio_dnxfer_sel[dev->spdn_cnt];
+
+ dev->spdn_cnt++;
+
+ if (ata_down_xfermask_limit(dev, sel) == 0) {
+ action |= ATA_EH_SOFTRESET;
+ goto done;
+ }
+ }
+ }
+
+ /* Fall back to PIO? Slowing down to PIO is meaningless for
+ * SATA. Consider it only for PATA.
+ */
+ if ((verdict & ATA_EH_SPDN_FALLBACK_TO_PIO) && (dev->spdn_cnt >= 2) &&
+ (dev->ap->cbl != ATA_CBL_SATA) &&
+ (dev->xfer_shift != ATA_SHIFT_PIO)) {
+ if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) {
+ dev->spdn_cnt = 0;
+ action |= ATA_EH_SOFTRESET;
+ goto done;
+ }
+ }
- ata_dev_printk(dev, KERN_ERR,
- "speed down requested but no transfer mode left\n");
return 0;
+ done:
+ /* device has been slowed down, blow error history */
+ ata_ering_clear(&dev->ering);
+ return action;
}
/**
@@ -1964,7 +2028,7 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
{
struct ata_eh_context *ehc = &ap->eh_context;
struct ata_device *dev;
- int down_xfermask, i, rc;
+ int i, rc;
DPRINTK("ENTER\n");
@@ -1993,7 +2057,6 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
}
retry:
- down_xfermask = 0;
rc = 0;
/* if UNLOADING, finish immediately */
@@ -2038,10 +2101,8 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
/* configure transfer mode if necessary */
if (ehc->i.flags & ATA_EHI_SETMODE) {
rc = ata_set_mode(ap, &dev);
- if (rc) {
- down_xfermask = 1;
+ if (rc)
goto dev_fail;
- }
ehc->i.flags &= ~ATA_EHI_SETMODE;
}
@@ -2053,20 +2114,27 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
goto out;
dev_fail:
+ ehc->tries[dev->devno]--;
+
switch (rc) {
- case -ENODEV:
- /* device missing, schedule probing */
- ehc->i.probe_mask |= (1 << dev->devno);
case -EINVAL:
+ /* eeek, something went very wrong, give up */
ehc->tries[dev->devno] = 0;
break;
+
+ case -ENODEV:
+ /* device missing or wrong IDENTIFY data, schedule probing */
+ ehc->i.probe_mask |= (1 << dev->devno);
+ /* give it just one more chance */
+ ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
case -EIO:
- sata_down_spd_limit(ap);
- default:
- ehc->tries[dev->devno]--;
- if (down_xfermask &&
- ata_down_xfermask_limit(dev, ehc->tries[dev->devno] == 1))
- ehc->tries[dev->devno] = 0;
+ if (ehc->tries[dev->devno] == 1) {
+ /* This is the last chance, better to slow
+ * down than lose it.
+ */
+ sata_down_spd_limit(ap);
+ ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
+ }
}
if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) {
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 0009818a430..00a9a6c8f83 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -333,6 +333,7 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
scsi_cmd[8] = args[3];
scsi_cmd[10] = args[4];
scsi_cmd[12] = args[5];
+ scsi_cmd[13] = args[6] & 0x0f;
scsi_cmd[14] = args[0];
/* Good values for timeout and retries? Values below
@@ -781,7 +782,7 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
*/
if (qc->err_mask ||
tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
- ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature,
&sb[1], &sb[2], &sb[3], verbose);
sb[1] &= 0x0f;
}
@@ -854,7 +855,7 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc)
*/
if (qc->err_mask ||
tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
- ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature,
&sb[1], &sb[2], &sb[3], verbose);
sb[1] &= 0x0f;
}
@@ -986,29 +987,32 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev;
unsigned long flags;
- int max_depth;
- if (queue_depth < 1)
+ if (queue_depth < 1 || queue_depth == sdev->queue_depth)
return sdev->queue_depth;
dev = ata_scsi_find_dev(ap, sdev);
if (!dev || !ata_dev_enabled(dev))
return sdev->queue_depth;
- max_depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id));
- max_depth = min(ATA_MAX_QUEUE - 1, max_depth);
- if (queue_depth > max_depth)
- queue_depth = max_depth;
-
- scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth);
-
+ /* NCQ enabled? */
spin_lock_irqsave(ap->lock, flags);
- if (queue_depth > 1)
- dev->flags &= ~ATA_DFLAG_NCQ_OFF;
- else
+ dev->flags &= ~ATA_DFLAG_NCQ_OFF;
+ if (queue_depth == 1 || !ata_ncq_enabled(dev)) {
dev->flags |= ATA_DFLAG_NCQ_OFF;
+ queue_depth = 1;
+ }
spin_unlock_irqrestore(ap->lock, flags);
+ /* limit and apply queue depth */
+ queue_depth = min(queue_depth, sdev->host->can_queue);
+ queue_depth = min(queue_depth, ata_id_queue_depth(dev->id));
+ queue_depth = min(queue_depth, ATA_MAX_QUEUE - 1);
+
+ if (sdev->queue_depth == queue_depth)
+ return -EINVAL;
+
+ scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth);
return queue_depth;
}
@@ -1469,7 +1473,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
}
if (need_sense && !ap->ops->error_handler)
- ata_dump_status(ap->id, &qc->result_tf);
+ ata_dump_status(ap->print_id, &qc->result_tf);
qc->scsidone(cmd);
@@ -1495,11 +1499,9 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
static int ata_scmd_need_defer(struct ata_device *dev, int is_io)
{
struct ata_port *ap = dev->ap;
+ int is_ncq = is_io && ata_ncq_enabled(dev);
- if (!(dev->flags & ATA_DFLAG_NCQ))
- return 0;
-
- if (is_io) {
+ if (is_ncq) {
if (!ata_tag_valid(ap->active_tag))
return 0;
} else {
@@ -2774,7 +2776,7 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap,
u8 *scsicmd = cmd->cmnd;
DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
- ap->id,
+ ap->print_id,
scsidev->channel, scsidev->id, scsidev->lun,
scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3],
scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7],
@@ -3234,7 +3236,7 @@ struct ata_port *ata_sas_port_alloc(struct ata_host *host,
ata_port_init(ap, host, ent, 0);
ap->lock = shost->host_lock;
- kfree(ent);
+ devm_kfree(host->dev, ent);
return ap;
}
EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 16bc3e35bdd..2ffcca063d8 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -175,7 +175,7 @@ void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
*/
void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
{
- DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
+ DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
iowrite8(tf->command, ap->ioaddr.command_addr);
ata_pause(ap);
@@ -521,7 +521,7 @@ void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
static int ata_resources_present(struct pci_dev *pdev, int port)
{
int i;
-
+
/* Check the PCI resources for this channel are enabled */
port = port * 2;
for (i = 0; i < 2; i ++) {
@@ -531,7 +531,7 @@ static int ata_resources_present(struct pci_dev *pdev, int port)
}
return 1;
}
-
+
/**
* ata_pci_init_native_mode - Initialize native-mode driver
* @pdev: pci device to be initialized
@@ -576,7 +576,7 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = IRQF_SHARED;
-
+
/* Discard disabled ports. Some controllers show their
unused channels this way */
if (ata_resources_present(pdev, 0) == 0)
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 0ad7781d72a..c42671493e8 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -41,6 +41,15 @@ struct ata_scsi_args {
enum {
/* flags for ata_dev_read_id() */
ATA_READID_POSTRESET = (1 << 0), /* reading ID after reset */
+
+ /* selector for ata_down_xfermask_limit() */
+ ATA_DNXFER_PIO = 0, /* speed down PIO */
+ ATA_DNXFER_DMA = 1, /* speed down DMA */
+ ATA_DNXFER_40C = 2, /* apply 40c cable limit */
+ ATA_DNXFER_FORCE_PIO = 3, /* force PIO */
+ ATA_DNXFER_FORCE_PIO0 = 4, /* force PIO0 */
+
+ ATA_DNXFER_QUIET = (1 << 31),
};
extern struct workqueue_struct *ata_aux_wq;
@@ -69,7 +78,7 @@ extern int ata_dev_revalidate(struct ata_device *dev, unsigned int flags);
extern int ata_dev_configure(struct ata_device *dev);
extern int sata_down_spd_limit(struct ata_port *ap);
extern int sata_set_spd_needed(struct ata_port *ap);
-extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0);
+extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev);
extern void ata_sg_clean(struct ata_queued_cmd *qc);
extern void ata_qc_free(struct ata_queued_cmd *qc);
@@ -150,7 +159,5 @@ extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc);
/* libata-sff.c */
extern u8 ata_irq_on(struct ata_port *ap);
-/* pata_sis.c */
-extern struct ata_port_info sis_info133;
#endif /* __LIBATA_H__ */
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index ab44d18850f..a90ed00c07e 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -34,7 +34,7 @@
#include <linux/dmi.h>
#define DRV_NAME "pata_ali"
-#define DRV_VERSION "0.7.2"
+#define DRV_VERSION "0.7.3"
/*
* Cable special cases
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 619e44b0403..3c760d0f471 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.2.7"
+#define DRV_VERSION "0.2.8"
/**
* timing_setup - shared timing computation and load
@@ -128,7 +128,7 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse
static int amd_pre_reset(struct ata_port *ap)
{
- static const u32 bitmask[2] = {0x03, 0xC0};
+ static const u32 bitmask[2] = {0x03, 0x0C};
static const struct pci_bits amd_enable_bits[] = {
{ 0x40, 1, 0x02, 0x02 },
{ 0x40, 1, 0x01, 0x01 }
@@ -247,7 +247,7 @@ static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev)
*/
static int nv_pre_reset(struct ata_port *ap) {
- static const u8 bitmask[2] = {0x03, 0xC0};
+ static const u8 bitmask[2] = {0x03, 0x0C};
static const struct pci_bits nv_enable_bits[] = {
{ 0x50, 1, 0x02, 0x02 },
{ 0x50, 1, 0x01, 0x01 }
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 1ce8fcfd782..c1334c6c415 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -41,7 +41,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_cs5520"
-#define DRV_VERSION "0.6.3"
+#define DRV_VERSION "0.6.4"
struct pio_clocks
{
@@ -325,6 +325,30 @@ static int cs5520_reinit_one(struct pci_dev *pdev)
pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
return ata_pci_device_resume(pdev);
}
+
+/**
+ * cs5520_pci_device_suspend - device suspend
+ * @pdev: PCI device
+ *
+ * We have to cut and waste bits from the standard method because
+ * the 5520 is a bit odd and not just a pure ATA device. As a result
+ * we must not disable it. The needed code is short and this avoids
+ * chip specific mess in the core code.
+ */
+
+static int cs5520_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc = 0;
+
+ rc = ata_host_suspend(host, mesg);
+ if (rc)
+ return rc;
+
+ pci_save_state(pdev);
+ return 0;
+}
+
/* For now keep DMA off. We can set it for all but A rev CS5510 once the
core ATA code can handle it */
@@ -340,7 +364,7 @@ static struct pci_driver cs5520_pci_driver = {
.id_table = pata_cs5520,
.probe = cs5520_init_one,
.remove = cs5520_remove_one,
- .suspend = ata_pci_device_suspend,
+ .suspend = cs5520_pci_device_suspend,
.resume = cs5520_reinit_one,
};
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 3d7b7d87ec6..78c7cdfff69 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -35,7 +35,7 @@
#include <linux/dmi.h>
#define DRV_NAME "pata_cs5530"
-#define DRV_VERSION "0.7.1"
+#define DRV_VERSION "0.7.2"
static void __iomem *cs5530_port_base(struct ata_port *ap)
{
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 27d724b5eea..e7d33c628a6 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -27,7 +27,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt366"
-#define DRV_VERSION "0.5.3"
+#define DRV_VERSION "0.6.0"
struct hpt_clock {
u8 xfer_speed;
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 4ffc392052c..f331eeeafa0 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.5.2"
+#define DRV_VERSION "0.6.0"
struct hpt_clock {
u8 xfer_speed;
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 1bf5ec18b2e..d5f2e85e28f 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -17,7 +17,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_isapnp"
-#define DRV_VERSION "0.1.5"
+#define DRV_VERSION "0.2.0"
static struct scsi_host_template isapnp_sht = {
.module = THIS_MODULE,
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 73394c75be4..903137a6da5 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -80,7 +80,7 @@
#define DRV_NAME "pata_it821x"
-#define DRV_VERSION "0.3.3"
+#define DRV_VERSION "0.3.4"
struct it821x_dev
{
@@ -503,10 +503,12 @@ static int it821x_smart_set_mode(struct ata_port *ap, struct ata_device **unused
/* We do need the right mode information for DMA or PIO
and this comes from the current configuration flags */
if (dma_enabled & (1 << (5 + i))) {
+ ata_dev_printk(dev, KERN_INFO, "configured for DMA\n");
dev->xfer_mode = XFER_MW_DMA_0;
dev->xfer_shift = ATA_SHIFT_MWDMA;
dev->flags &= ~ATA_DFLAG_PIO;
} else {
+ ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
dev->flags |= ATA_DFLAG_PIO;
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 3222ac7b945..9a0523b5c94 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -23,15 +23,16 @@
#include <scsi/scsi_host.h>
#define DRV_NAME "pata_ixp4xx_cf"
-#define DRV_VERSION "0.1.1ac1"
+#define DRV_VERSION "0.1.2"
-static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device *adev)
+static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error)
{
int i;
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- if (ata_dev_enabled(dev)) {
+ if (ata_dev_ready(dev)) {
+ ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 98c1fee4b30..6ee61c67163 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -64,7 +64,7 @@
#include <linux/platform_device.h>
#define DRV_NAME "pata_legacy"
-#define DRV_VERSION "0.5.3"
+#define DRV_VERSION "0.5.4"
#define NR_HOST 6
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 45215aa05e7..2389107a200 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -25,7 +25,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_oldpiix"
-#define DRV_VERSION "0.5.3"
+#define DRV_VERSION "0.5.4"
/**
* oldpiix_pre_reset - probe begin
@@ -209,10 +209,9 @@ static unsigned int oldpiix_qc_issue_prot(struct ata_queued_cmd *qc)
struct ata_device *adev = qc->dev;
if (adev != ap->private_data) {
+ oldpiix_set_piomode(ap, adev);
if (adev->dma_mode)
oldpiix_set_dmamode(ap, adev);
- else if (adev->pio_mode)
- oldpiix_set_piomode(ap, adev);
}
return ata_qc_issue_prot(qc);
}
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index da1aa148b37..1b3cd5369f0 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -34,7 +34,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_opti"
-#define DRV_VERSION "0.2.7"
+#define DRV_VERSION "0.2.8"
enum {
READ_REG = 0, /* index of Read cycle timing register */
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index d80b36e209c..b76c976e505 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -33,7 +33,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_optidma"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.2.4"
enum {
READ_REG = 0, /* index of Read cycle timing register */
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 8928a6dfac5..103720f873c 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -42,7 +42,7 @@
#define DRV_NAME "pata_pcmcia"
-#define DRV_VERSION "0.2.11"
+#define DRV_VERSION "0.3.0"
/*
* Private data structure to glue stuff together
@@ -319,14 +319,17 @@ static void pcmcia_remove_one(struct pcmcia_device *pdev)
static struct pcmcia_device_id pcmcia_devices[] = {
PCMCIA_DEVICE_FUNC_ID(4),
PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */
+ PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
+ PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
- PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),
+ PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
- PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar */
+ PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */
+ PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */
PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 61537873d28..93bcdadb7be 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -35,7 +35,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_pdc2027x"
-#define DRV_VERSION "0.74-ac5"
+#define DRV_VERSION "0.8"
#undef PDC_DEBUG
#ifdef PDC_DEBUG
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 6dd63413a52..80685388c2b 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -21,7 +21,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_pdc202xx_old"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.3.0"
/**
* pdc2024x_pre_reset - probe begin
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 479a326114e..02ea95fcba6 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -42,6 +42,7 @@ static int pata_platform_set_mode(struct ata_port *ap, struct ata_device **unuse
dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
dev->flags |= ATA_DFLAG_PIO;
+ ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
}
}
return 0;
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 4362141976a..c2f87da6033 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -26,7 +26,7 @@
#include <linux/platform_device.h>
#define DRV_NAME "pata_qdi"
-#define DRV_VERSION "0.2.4"
+#define DRV_VERSION "0.3.0"
#define NR_HOST 4 /* Two 6580s */
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 71a2bac09e0..60fc598f765 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -71,6 +71,7 @@ static int rz1000_set_mode(struct ata_port *ap, struct ata_device **unused)
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
dev->flags |= ATA_DFLAG_PIO;
+ ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
}
}
return 0;
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
new file mode 100644
index 00000000000..45866098fbf
--- /dev/null
+++ b/drivers/ata/pata_scc.c
@@ -0,0 +1,1228 @@
+/*
+ * Support for IDE interfaces on Celleb platform
+ *
+ * (C) Copyright 2006 TOSHIBA CORPORATION
+ *
+ * This code is based on drivers/ata/ata_piix.c:
+ * Copyright 2003-2005 Red Hat Inc
+ * Copyright 2003-2005 Jeff Garzik
+ * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
+ * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
+ *
+ * and drivers/ata/ahci.c:
+ * Copyright 2004-2005 Red Hat, Inc.
+ *
+ * and drivers/ata/libata-core.c:
+ * Copyright 2003-2004 Red Hat, Inc. All rights reserved.
+ * Copyright 2003-2004 Jeff Garzik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_scc"
+#define DRV_VERSION "0.1"
+
+#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
+
+/* PCI BARs */
+#define SCC_CTRL_BAR 0
+#define SCC_BMID_BAR 1
+
+/* offset of CTRL registers */
+#define SCC_CTL_PIOSHT 0x000
+#define SCC_CTL_PIOCT 0x004
+#define SCC_CTL_MDMACT 0x008
+#define SCC_CTL_MCRCST 0x00C
+#define SCC_CTL_SDMACT 0x010
+#define SCC_CTL_SCRCST 0x014
+#define SCC_CTL_UDENVT 0x018
+#define SCC_CTL_TDVHSEL 0x020
+#define SCC_CTL_MODEREG 0x024
+#define SCC_CTL_ECMODE 0xF00
+#define SCC_CTL_MAEA0 0xF50
+#define SCC_CTL_MAEC0 0xF54
+#define SCC_CTL_CCKCTRL 0xFF0
+
+/* offset of BMID registers */
+#define SCC_DMA_CMD 0x000
+#define SCC_DMA_STATUS 0x004
+#define SCC_DMA_TABLE_OFS 0x008
+#define SCC_DMA_INTMASK 0x010
+#define SCC_DMA_INTST 0x014
+#define SCC_DMA_PTERADD 0x018
+#define SCC_REG_CMD_ADDR 0x020
+#define SCC_REG_DATA 0x000
+#define SCC_REG_ERR 0x004
+#define SCC_REG_FEATURE 0x004
+#define SCC_REG_NSECT 0x008
+#define SCC_REG_LBAL 0x00C
+#define SCC_REG_LBAM 0x010
+#define SCC_REG_LBAH 0x014
+#define SCC_REG_DEVICE 0x018
+#define SCC_REG_STATUS 0x01C
+#define SCC_REG_CMD 0x01C
+#define SCC_REG_ALTSTATUS 0x020
+
+/* register value */
+#define TDVHSEL_MASTER 0x00000001
+#define TDVHSEL_SLAVE 0x00000004
+
+#define MODE_JCUSFEN 0x00000080
+
+#define ECMODE_VALUE 0x01
+
+#define CCKCTRL_ATARESET 0x00040000
+#define CCKCTRL_BUFCNT 0x00020000
+#define CCKCTRL_CRST 0x00010000
+#define CCKCTRL_OCLKEN 0x00000100
+#define CCKCTRL_ATACLKOEN 0x00000002
+#define CCKCTRL_LCLKEN 0x00000001
+
+#define QCHCD_IOS_SS 0x00000001
+
+#define QCHSD_STPDIAG 0x00020000
+
+#define INTMASK_MSK 0xD1000012
+#define INTSTS_SERROR 0x80000000
+#define INTSTS_PRERR 0x40000000
+#define INTSTS_RERR 0x10000000
+#define INTSTS_ICERR 0x01000000
+#define INTSTS_BMSINT 0x00000010
+#define INTSTS_BMHE 0x00000008
+#define INTSTS_IOIRQS 0x00000004
+#define INTSTS_INTRQ 0x00000002
+#define INTSTS_ACTEINT 0x00000001
+
+
+/* PIO transfer mode table */
+/* JCHST */
+static const unsigned long JCHSTtbl[2][7] = {
+ {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
+ {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
+};
+
+/* JCHHT */
+static const unsigned long JCHHTtbl[2][7] = {
+ {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
+ {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
+};
+
+/* JCHCT */
+static const unsigned long JCHCTtbl[2][7] = {
+ {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
+ {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
+};
+
+/* DMA transfer mode table */
+/* JCHDCTM/JCHDCTS */
+static const unsigned long JCHDCTxtbl[2][7] = {
+ {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
+ {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
+};
+
+/* JCSTWTM/JCSTWTS */
+static const unsigned long JCSTWTxtbl[2][7] = {
+ {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
+ {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
+};
+
+/* JCTSS */
+static const unsigned long JCTSStbl[2][7] = {
+ {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
+ {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
+};
+
+/* JCENVT */
+static const unsigned long JCENVTtbl[2][7] = {
+ {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
+ {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
+};
+
+/* JCACTSELS/JCACTSELM */
+static const unsigned long JCACTSELtbl[2][7] = {
+ {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
+};
+
+static const struct pci_device_id scc_pci_tbl[] = {
+ {PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { } /* terminate list */
+};
+
+/**
+ * scc_set_piomode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: um
+ *
+ * Set PIO mode for device.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev)
+{
+ unsigned int pio = adev->pio_mode - XFER_PIO_0;
+ void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
+ void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
+ void __iomem *piosht_port = ctrl_base + SCC_CTL_PIOSHT;
+ void __iomem *pioct_port = ctrl_base + SCC_CTL_PIOCT;
+ unsigned long reg;
+ int offset;
+
+ reg = in_be32(cckctrl_port);
+ if (reg & CCKCTRL_ATACLKOEN)
+ offset = 1; /* 133MHz */
+ else
+ offset = 0; /* 100MHz */
+
+ reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
+ out_be32(piosht_port, reg);
+ reg = JCHCTtbl[offset][pio];
+ out_be32(pioct_port, reg);
+}
+
+/**
+ * scc_set_dmamode - Initialize host controller PATA DMA timings
+ * @ap: Port whose timings we are configuring
+ * @adev: um
+ * @udma: udma mode, 0 - 6
+ *
+ * Set UDMA mode for device.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev)
+{
+ unsigned int udma = adev->dma_mode;
+ unsigned int is_slave = (adev->devno != 0);
+ u8 speed = udma;
+ void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
+ void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
+ void __iomem *mdmact_port = ctrl_base + SCC_CTL_MDMACT;
+ void __iomem *mcrcst_port = ctrl_base + SCC_CTL_MCRCST;
+ void __iomem *sdmact_port = ctrl_base + SCC_CTL_SDMACT;
+ void __iomem *scrcst_port = ctrl_base + SCC_CTL_SCRCST;
+ void __iomem *udenvt_port = ctrl_base + SCC_CTL_UDENVT;
+ void __iomem *tdvhsel_port = ctrl_base + SCC_CTL_TDVHSEL;
+ int offset, idx;
+
+ if (in_be32(cckctrl_port) & CCKCTRL_ATACLKOEN)
+ offset = 1; /* 133MHz */
+ else
+ offset = 0; /* 100MHz */
+
+ if (speed >= XFER_UDMA_0)
+ idx = speed - XFER_UDMA_0;
+ else
+ return;
+
+ if (is_slave) {
+ out_be32(sdmact_port, JCHDCTxtbl[offset][idx]);
+ out_be32(scrcst_port, JCSTWTxtbl[offset][idx]);
+ out_be32(tdvhsel_port,
+ (in_be32(tdvhsel_port) & ~TDVHSEL_SLAVE) | (JCACTSELtbl[offset][idx] << 2));
+ } else {
+ out_be32(mdmact_port, JCHDCTxtbl[offset][idx]);
+ out_be32(mcrcst_port, JCSTWTxtbl[offset][idx]);
+ out_be32(tdvhsel_port,
+ (in_be32(tdvhsel_port) & ~TDVHSEL_MASTER) | JCACTSELtbl[offset][idx]);
+ }
+ out_be32(udenvt_port,
+ JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]);
+}
+
+/**
+ * scc_tf_load - send taskfile registers to host controller
+ * @ap: Port to which output is sent
+ * @tf: ATA taskfile register set
+ *
+ * Note: Original code is ata_tf_load().
+ */
+
+static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+ if (tf->ctl != ap->last_ctl) {
+ out_be32(ioaddr->ctl_addr, tf->ctl);
+ ap->last_ctl = tf->ctl;
+ ata_wait_idle(ap);
+ }
+
+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ out_be32(ioaddr->feature_addr, tf->hob_feature);
+ out_be32(ioaddr->nsect_addr, tf->hob_nsect);
+ out_be32(ioaddr->lbal_addr, tf->hob_lbal);
+ out_be32(ioaddr->lbam_addr, tf->hob_lbam);
+ out_be32(ioaddr->lbah_addr, tf->hob_lbah);
+ VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+ tf->hob_feature,
+ tf->hob_nsect,
+ tf->hob_lbal,
+ tf->hob_lbam,
+ tf->hob_lbah);
+ }
+
+ if (is_addr) {
+ out_be32(ioaddr->feature_addr, tf->feature);
+ out_be32(ioaddr->nsect_addr, tf->nsect);
+ out_be32(ioaddr->lbal_addr, tf->lbal);
+ out_be32(ioaddr->lbam_addr, tf->lbam);
+ out_be32(ioaddr->lbah_addr, tf->lbah);
+ VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+ tf->feature,
+ tf->nsect,
+ tf->lbal,
+ tf->lbam,
+ tf->lbah);
+ }
+
+ if (tf->flags & ATA_TFLAG_DEVICE) {
+ out_be32(ioaddr->device_addr, tf->device);
+ VPRINTK("device 0x%X\n", tf->device);
+ }
+
+ ata_wait_idle(ap);
+}
+
+/**
+ * scc_check_status - Read device status reg & clear interrupt
+ * @ap: port where the device is
+ *
+ * Note: Original code is ata_check_status().
+ */
+
+static u8 scc_check_status (struct ata_port *ap)
+{
+ return in_be32(ap->ioaddr.status_addr);
+}
+
+/**
+ * scc_tf_read - input device's ATA taskfile shadow registers
+ * @ap: Port from which input is read
+ * @tf: ATA taskfile register set for storing input
+ *
+ * Note: Original code is ata_tf_read().
+ */
+
+static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ tf->command = scc_check_status(ap);
+ tf->feature = in_be32(ioaddr->error_addr);
+ tf->nsect = in_be32(ioaddr->nsect_addr);
+ tf->lbal = in_be32(ioaddr->lbal_addr);
+ tf->lbam = in_be32(ioaddr->lbam_addr);
+ tf->lbah = in_be32(ioaddr->lbah_addr);
+ tf->device = in_be32(ioaddr->device_addr);
+
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ out_be32(ioaddr->ctl_addr, tf->ctl | ATA_HOB);
+ tf->hob_feature = in_be32(ioaddr->error_addr);
+ tf->hob_nsect = in_be32(ioaddr->nsect_addr);
+ tf->hob_lbal = in_be32(ioaddr->lbal_addr);
+ tf->hob_lbam = in_be32(ioaddr->lbam_addr);
+ tf->hob_lbah = in_be32(ioaddr->lbah_addr);
+ }
+}
+
+/**
+ * scc_exec_command - issue ATA command to host controller
+ * @ap: port to which command is being issued
+ * @tf: ATA taskfile register set
+ *
+ * Note: Original code is ata_exec_command().
+ */
+
+static void scc_exec_command (struct ata_port *ap,
+ const struct ata_taskfile *tf)
+{
+ DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
+
+ out_be32(ap->ioaddr.command_addr, tf->command);
+ ata_pause(ap);
+}
+
+/**
+ * scc_check_altstatus - Read device alternate status reg
+ * @ap: port where the device is
+ */
+
+static u8 scc_check_altstatus (struct ata_port *ap)
+{
+ return in_be32(ap->ioaddr.altstatus_addr);
+}
+
+/**
+ * scc_std_dev_select - Select device 0/1 on ATA bus
+ * @ap: ATA channel to manipulate
+ * @device: ATA device (numbered from zero) to select
+ *
+ * Note: Original code is ata_std_dev_select().
+ */
+
+static void scc_std_dev_select (struct ata_port *ap, unsigned int device)
+{
+ u8 tmp;
+
+ if (device == 0)
+ tmp = ATA_DEVICE_OBS;
+ else
+ tmp = ATA_DEVICE_OBS | ATA_DEV1;
+
+ out_be32(ap->ioaddr.device_addr, tmp);
+ ata_pause(ap);
+}
+
+/**
+ * scc_bmdma_setup - Set up PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * Note: Original code is ata_bmdma_setup().
+ */
+
+static void scc_bmdma_setup (struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+ u8 dmactl;
+ void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+ /* load PRD table addr */
+ out_be32(mmio + SCC_DMA_TABLE_OFS, ap->prd_dma);
+
+ /* specify data direction, triple-check start bit is clear */
+ dmactl = in_be32(mmio + SCC_DMA_CMD);
+ dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
+ if (!rw)
+ dmactl |= ATA_DMA_WR;
+ out_be32(mmio + SCC_DMA_CMD, dmactl);
+
+ /* issue r/w command */
+ ap->ops->exec_command(ap, &qc->tf);
+}
+
+/**
+ * scc_bmdma_start - Start a PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * Note: Original code is ata_bmdma_start().
+ */
+
+static void scc_bmdma_start (struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ u8 dmactl;
+ void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+ /* start host DMA transaction */
+ dmactl = in_be32(mmio + SCC_DMA_CMD);
+ out_be32(mmio + SCC_DMA_CMD, dmactl | ATA_DMA_START);
+}
+
+/**
+ * scc_devchk - PATA device presence detection
+ * @ap: ATA channel to examine
+ * @device: Device to examine (starting at zero)
+ *
+ * Note: Original code is ata_devchk().
+ */
+
+static unsigned int scc_devchk (struct ata_port *ap,
+ unsigned int device)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ u8 nsect, lbal;
+
+ ap->ops->dev_select(ap, device);
+
+ out_be32(ioaddr->nsect_addr, 0x55);
+ out_be32(ioaddr->lbal_addr, 0xaa);
+
+ out_be32(ioaddr->nsect_addr, 0xaa);
+ out_be32(ioaddr->lbal_addr, 0x55);
+
+ out_be32(ioaddr->nsect_addr, 0x55);
+ out_be32(ioaddr->lbal_addr, 0xaa);
+
+ nsect = in_be32(ioaddr->nsect_addr);
+ lbal = in_be32(ioaddr->lbal_addr);
+
+ if ((nsect == 0x55) && (lbal == 0xaa))
+ return 1; /* we found a device */
+
+ return 0; /* nothing found */
+}
+
+/**
+ * scc_bus_post_reset - PATA device post reset
+ *
+ * Note: Original code is ata_bus_post_reset().
+ */
+
+static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ unsigned int dev0 = devmask & (1 << 0);
+ unsigned int dev1 = devmask & (1 << 1);
+ unsigned long timeout;
+
+ /* if device 0 was found in ata_devchk, wait for its
+ * BSY bit to clear
+ */
+ if (dev0)
+ ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+
+ /* if device 1 was found in ata_devchk, wait for
+ * register access, then wait for BSY to clear
+ */
+ timeout = jiffies + ATA_TMOUT_BOOT;
+ while (dev1) {
+ u8 nsect, lbal;
+
+ ap->ops->dev_select(ap, 1);
+ nsect = in_be32(ioaddr->nsect_addr);
+ lbal = in_be32(ioaddr->lbal_addr);
+ if ((nsect == 1) && (lbal == 1))
+ break;
+ if (time_after(jiffies, timeout)) {
+ dev1 = 0;
+ break;
+ }
+ msleep(50); /* give drive a breather */
+ }
+ if (dev1)
+ ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+
+ /* is all this really necessary? */
+ ap->ops->dev_select(ap, 0);
+ if (dev1)
+ ap->ops->dev_select(ap, 1);
+ if (dev0)
+ ap->ops->dev_select(ap, 0);
+}
+
+/**
+ * scc_bus_softreset - PATA device software reset
+ *
+ * Note: Original code is ata_bus_softreset().
+ */
+
+static unsigned int scc_bus_softreset (struct ata_port *ap,
+ unsigned int devmask)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
+
+ /* software reset. causes dev0 to be selected */
+ out_be32(ioaddr->ctl_addr, ap->ctl);
+ udelay(20);
+ out_be32(ioaddr->ctl_addr, ap->ctl | ATA_SRST);
+ udelay(20);
+ out_be32(ioaddr->ctl_addr, ap->ctl);
+
+ /* spec mandates ">= 2ms" before checking status.
+ * We wait 150ms, because that was the magic delay used for
+ * ATAPI devices in Hale Landis's ATADRVR, for the period of time
+ * between when the ATA command register is written, and then
+ * status is checked. Because waiting for "a while" before
+ * checking status is fine, post SRST, we perform this magic
+ * delay here as well.
+ *
+ * Old drivers/ide uses the 2mS rule and then waits for ready
+ */
+ msleep(150);
+
+ /* Before we perform post reset processing we want to see if
+ * the bus shows 0xFF because the odd clown forgets the D7
+ * pulldown resistor.
+ */
+ if (scc_check_status(ap) == 0xFF)
+ return 0;
+
+ scc_bus_post_reset(ap, devmask);
+
+ return 0;
+}
+
+/**
+ * scc_std_softreset - reset host port via ATA SRST
+ * @ap: port to reset
+ * @classes: resulting classes of attached devices
+ *
+ * Note: Original code is ata_std_softreset().
+ */
+
+static int scc_std_softreset (struct ata_port *ap, unsigned int *classes)
+{
+ unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
+ unsigned int devmask = 0, err_mask;
+ u8 err;
+
+ DPRINTK("ENTER\n");
+
+ if (ata_port_offline(ap)) {
+ classes[0] = ATA_DEV_NONE;
+ goto out;
+ }
+
+ /* determine if device 0/1 are present */
+ if (scc_devchk(ap, 0))
+ devmask |= (1 << 0);
+ if (slave_possible && scc_devchk(ap, 1))
+ devmask |= (1 << 1);
+
+ /* select device 0 again */
+ ap->ops->dev_select(ap, 0);
+
+ /* issue bus reset */
+ DPRINTK("about to softreset, devmask=%x\n", devmask);
+ err_mask = scc_bus_softreset(ap, devmask);
+ if (err_mask) {
+ ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n",
+ err_mask);
+ return -EIO;
+ }
+
+ /* determine by signature whether we have ATA or ATAPI devices */
+ classes[0] = ata_dev_try_classify(ap, 0, &err);
+ if (slave_possible && err != 0x81)
+ classes[1] = ata_dev_try_classify(ap, 1, &err);
+
+ out:
+ DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
+ return 0;
+}
+
+/**
+ * scc_bmdma_stop - Stop PCI IDE BMDMA transfer
+ * @qc: Command we are ending DMA for
+ */
+
+static void scc_bmdma_stop (struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
+ void __iomem *bmid_base = ap->host->iomap[SCC_BMID_BAR];
+ u32 reg;
+
+ while (1) {
+ reg = in_be32(bmid_base + SCC_DMA_INTST);
+
+ if (reg & INTSTS_SERROR) {
+ printk(KERN_WARNING "%s: SERROR\n", DRV_NAME);
+ out_be32(bmid_base + SCC_DMA_INTST, INTSTS_SERROR|INTSTS_BMSINT);
+ out_be32(bmid_base + SCC_DMA_CMD,
+ in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
+ continue;
+ }
+
+ if (reg & INTSTS_PRERR) {
+ u32 maea0, maec0;
+ maea0 = in_be32(ctrl_base + SCC_CTL_MAEA0);
+ maec0 = in_be32(ctrl_base + SCC_CTL_MAEC0);
+ printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", DRV_NAME, maea0, maec0);
+ out_be32(bmid_base + SCC_DMA_INTST, INTSTS_PRERR|INTSTS_BMSINT);
+ out_be32(bmid_base + SCC_DMA_CMD,
+ in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
+ continue;
+ }
+
+ if (reg & INTSTS_RERR) {
+ printk(KERN_WARNING "%s: Response Error\n", DRV_NAME);
+ out_be32(bmid_base + SCC_DMA_INTST, INTSTS_RERR|INTSTS_BMSINT);
+ out_be32(bmid_base + SCC_DMA_CMD,
+ in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
+ continue;
+ }
+
+ if (reg & INTSTS_ICERR) {
+ out_be32(bmid_base + SCC_DMA_CMD,
+ in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
+ printk(KERN_WARNING "%s: Illegal Configuration\n", DRV_NAME);
+ out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ICERR|INTSTS_BMSINT);
+ continue;
+ }
+
+ if (reg & INTSTS_BMSINT) {
+ unsigned int classes;
+ printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME);
+ out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT);
+ /* TBD: SW reset */
+ scc_std_softreset(ap, &classes);
+ continue;
+ }
+
+ if (reg & INTSTS_BMHE) {
+ out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMHE);
+ continue;
+ }
+
+ if (reg & INTSTS_ACTEINT) {
+ out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ACTEINT);
+ continue;
+ }
+
+ if (reg & INTSTS_IOIRQS) {
+ out_be32(bmid_base + SCC_DMA_INTST, INTSTS_IOIRQS);
+ continue;
+ }
+ break;
+ }
+
+ /* clear start/stop bit */
+ out_be32(bmid_base + SCC_DMA_CMD,
+ in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
+
+ /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
+ ata_altstatus(ap); /* dummy read */
+}
+
+/**
+ * scc_bmdma_status - Read PCI IDE BMDMA status
+ * @ap: Port associated with this ATA transaction.
+ */
+
+static u8 scc_bmdma_status (struct ata_port *ap)
+{
+ u8 host_stat;
+ void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+ host_stat = in_be32(mmio + SCC_DMA_STATUS);
+
+ /* Workaround for PTERADD: emulate DMA_INTR when
+ * - IDE_STATUS[ERR] = 1
+ * - INT_STATUS[INTRQ] = 1
+ * - DMA_STATUS[IORACTA] = 1
+ */
+ if (!(host_stat & ATA_DMA_INTR)) {
+ u32 int_status = in_be32(mmio + SCC_DMA_INTST);
+ if (ata_altstatus(ap) & ATA_ERR &&
+ int_status & INTSTS_INTRQ &&
+ host_stat & ATA_DMA_ACTIVE)
+ host_stat |= ATA_DMA_INTR;
+ }
+
+ return host_stat;
+}
+
+/**
+ * scc_data_xfer - Transfer data by PIO
+ * @adev: device for this I/O
+ * @buf: data buffer
+ * @buflen: buffer length
+ * @write_data: read/write
+ *
+ * Note: Original code is ata_data_xfer().
+ */
+
+static void scc_data_xfer (struct ata_device *adev, unsigned char *buf,
+ unsigned int buflen, int write_data)
+{
+ struct ata_port *ap = adev->ap;
+ unsigned int words = buflen >> 1;
+ unsigned int i;
+ u16 *buf16 = (u16 *) buf;
+ void __iomem *mmio = ap->ioaddr.data_addr;
+
+ /* Transfer multiple of 2 bytes */
+ if (write_data) {
+ for (i = 0; i < words; i++)
+ out_be32(mmio, cpu_to_le16(buf16[i]));
+ } else {
+ for (i = 0; i < words; i++)
+ buf16[i] = le16_to_cpu(in_be32(mmio));
+ }
+
+ /* Transfer trailing 1 byte, if any. */
+ if (unlikely(buflen & 0x01)) {
+ u16 align_buf[1] = { 0 };
+ unsigned char *trailing_buf = buf + buflen - 1;
+
+ if (write_data) {
+ memcpy(align_buf, trailing_buf, 1);
+ out_be32(mmio, cpu_to_le16(align_buf[0]));
+ } else {
+ align_buf[0] = le16_to_cpu(in_be32(mmio));
+ memcpy(trailing_buf, align_buf, 1);
+ }
+ }
+}
+
+/**
+ * scc_irq_on - Enable interrupts on a port.
+ * @ap: Port on which interrupts are enabled.
+ *
+ * Note: Original code is ata_irq_on().
+ */
+
+static u8 scc_irq_on (struct ata_port *ap)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ u8 tmp;
+
+ ap->ctl &= ~ATA_NIEN;
+ ap->last_ctl = ap->ctl;
+
+ out_be32(ioaddr->ctl_addr, ap->ctl);
+ tmp = ata_wait_idle(ap);
+
+ ap->ops->irq_clear(ap);
+
+ return tmp;
+}
+
+/**
+ * scc_irq_ack - Acknowledge a device interrupt.
+ * @ap: Port on which interrupts are enabled.
+ *
+ * Note: Original code is ata_irq_ack().
+ */
+
+static u8 scc_irq_ack (struct ata_port *ap, unsigned int chk_drq)
+{
+ unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
+ u8 host_stat, post_stat, status;
+
+ status = ata_busy_wait(ap, bits, 1000);
+ if (status & bits)
+ if (ata_msg_err(ap))
+ printk(KERN_ERR "abnormal status 0x%X\n", status);
+
+ /* get controller status; clear intr, err bits */
+ host_stat = in_be32(ap->ioaddr.bmdma_addr + SCC_DMA_STATUS);
+ out_be32(ap->ioaddr.bmdma_addr + SCC_DMA_STATUS,
+ host_stat | ATA_DMA_INTR | ATA_DMA_ERR);
+
+ post_stat = in_be32(ap->ioaddr.bmdma_addr + SCC_DMA_STATUS);
+
+ if (ata_msg_intr(ap))
+ printk(KERN_INFO "%s: irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n",
+ __FUNCTION__,
+ host_stat, post_stat, status);
+
+ return status;
+}
+
+/**
+ * scc_bmdma_freeze - Freeze BMDMA controller port
+ * @ap: port to freeze
+ *
+ * Note: Original code is ata_bmdma_freeze().
+ */
+
+static void scc_bmdma_freeze (struct ata_port *ap)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ ap->ctl |= ATA_NIEN;
+ ap->last_ctl = ap->ctl;
+
+ out_be32(ioaddr->ctl_addr, ap->ctl);
+
+ /* Under certain circumstances, some controllers raise IRQ on
+ * ATA_NIEN manipulation. Also, many controllers fail to mask
+ * previously pending IRQ on ATA_NIEN assertion. Clear it.
+ */
+ ata_chk_status(ap);
+
+ ap->ops->irq_clear(ap);
+}
+
+/**
+ * scc_pata_prereset - prepare for reset
+ * @ap: ATA port to be reset
+ */
+
+static int scc_pata_prereset (struct ata_port *ap)
+{
+ ap->cbl = ATA_CBL_PATA80;
+ return ata_std_prereset(ap);
+}
+
+/**
+ * scc_std_postreset - standard postreset callback
+ * @ap: the target ata_port
+ * @classes: classes of attached devices
+ *
+ * Note: Original code is ata_std_postreset().
+ */
+
+static void scc_std_postreset (struct ata_port *ap, unsigned int *classes)
+{
+ DPRINTK("ENTER\n");
+
+ /* re-enable interrupts */
+ if (!ap->ops->error_handler)
+ ap->ops->irq_on(ap);
+
+ /* is double-select really necessary? */
+ if (classes[0] != ATA_DEV_NONE)
+ ap->ops->dev_select(ap, 1);
+ if (classes[1] != ATA_DEV_NONE)
+ ap->ops->dev_select(ap, 0);
+
+ /* bail out if no device is present */
+ if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
+ DPRINTK("EXIT, no device\n");
+ return;
+ }
+
+ /* set up device control */
+ if (ap->ioaddr.ctl_addr)
+ out_be32(ap->ioaddr.ctl_addr, ap->ctl);
+
+ DPRINTK("EXIT\n");
+}
+
+/**
+ * scc_error_handler - Stock error handler for BMDMA controller
+ * @ap: port to handle error for
+ */
+
+static void scc_error_handler (struct ata_port *ap)
+{
+ ata_bmdma_drive_eh(ap, scc_pata_prereset, scc_std_softreset, NULL,
+ scc_std_postreset);
+}
+
+/**
+ * scc_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Note: Original code is ata_bmdma_irq_clear().
+ */
+
+static void scc_bmdma_irq_clear (struct ata_port *ap)
+{
+ void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+ if (!mmio)
+ return;
+
+ out_be32(mmio + SCC_DMA_STATUS, in_be32(mmio + SCC_DMA_STATUS));
+}
+
+/**
+ * scc_port_start - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Allocate space for PRD table using ata_port_start().
+ * Set PRD table address for PTERADD. (PRD Transfer End Read)
+ */
+
+static int scc_port_start (struct ata_port *ap)
+{
+ void __iomem *mmio = ap->ioaddr.bmdma_addr;
+ int rc;
+
+ rc = ata_port_start(ap);
+ if (rc)
+ return rc;
+
+ out_be32(mmio + SCC_DMA_PTERADD, ap->prd_dma);
+ return 0;
+}
+
+/**
+ * scc_port_stop - Undo scc_port_start()
+ * @ap: Port to shut down
+ *
+ * Reset PTERADD.
+ */
+
+static void scc_port_stop (struct ata_port *ap)
+{
+ void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+ out_be32(mmio + SCC_DMA_PTERADD, 0);
+}
+
+static struct scsi_host_template scc_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
+ .bios_param = ata_std_bios_param,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
+};
+
+static const struct ata_port_operations scc_pata_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = scc_set_piomode,
+ .set_dmamode = scc_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = scc_tf_load,
+ .tf_read = scc_tf_read,
+ .exec_command = scc_exec_command,
+ .check_status = scc_check_status,
+ .check_altstatus = scc_check_altstatus,
+ .dev_select = scc_std_dev_select,
+
+ .bmdma_setup = scc_bmdma_setup,
+ .bmdma_start = scc_bmdma_start,
+ .bmdma_stop = scc_bmdma_stop,
+ .bmdma_status = scc_bmdma_status,
+ .data_xfer = scc_data_xfer,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .freeze = scc_bmdma_freeze,
+ .error_handler = scc_error_handler,
+ .post_internal_cmd = scc_bmdma_stop,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = scc_bmdma_irq_clear,
+ .irq_on = scc_irq_on,
+ .irq_ack = scc_irq_ack,
+
+ .port_start = scc_port_start,
+ .port_stop = scc_port_stop,
+};
+
+static struct ata_port_info scc_port_info[] = {
+ {
+ .sht = &scc_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x00,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &scc_pata_ops,
+ },
+};
+
+/**
+ * scc_reset_controller - initialize SCC PATA controller.
+ */
+
+static int scc_reset_controller(struct ata_probe_ent *probe_ent)
+{
+ void __iomem *ctrl_base = probe_ent->iomap[SCC_CTRL_BAR];
+ void __iomem *bmid_base = probe_ent->iomap[SCC_BMID_BAR];
+ void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
+ void __iomem *mode_port = ctrl_base + SCC_CTL_MODEREG;
+ void __iomem *ecmode_port = ctrl_base + SCC_CTL_ECMODE;
+ void __iomem *intmask_port = bmid_base + SCC_DMA_INTMASK;
+ void __iomem *dmastatus_port = bmid_base + SCC_DMA_STATUS;
+ u32 reg = 0;
+
+ out_be32(cckctrl_port, reg);
+ reg |= CCKCTRL_ATACLKOEN;
+ out_be32(cckctrl_port, reg);
+ reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
+ out_be32(cckctrl_port, reg);
+ reg |= CCKCTRL_CRST;
+ out_be32(cckctrl_port, reg);
+
+ for (;;) {
+ reg = in_be32(cckctrl_port);
+ if (reg & CCKCTRL_CRST)
+ break;
+ udelay(5000);
+ }
+
+ reg |= CCKCTRL_ATARESET;
+ out_be32(cckctrl_port, reg);
+ out_be32(ecmode_port, ECMODE_VALUE);
+ out_be32(mode_port, MODE_JCUSFEN);
+ out_be32(intmask_port, INTMASK_MSK);
+
+ if (in_be32(dmastatus_port) & QCHSD_STPDIAG) {
+ printk(KERN_WARNING "%s: failed to detect 80c cable. (PDIAG# is high)\n", DRV_NAME);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * scc_setup_ports - initialize ioaddr with SCC PATA port offsets.
+ * @ioaddr: IO address structure to be initialized
+ * @base: base address of BMID region
+ */
+
+static void scc_setup_ports (struct ata_ioports *ioaddr, void __iomem *base)
+{
+ ioaddr->cmd_addr = base + SCC_REG_CMD_ADDR;
+ ioaddr->altstatus_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS;
+ ioaddr->ctl_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS;
+ ioaddr->bmdma_addr = base;
+ ioaddr->data_addr = ioaddr->cmd_addr + SCC_REG_DATA;
+ ioaddr->error_addr = ioaddr->cmd_addr + SCC_REG_ERR;
+ ioaddr->feature_addr = ioaddr->cmd_addr + SCC_REG_FEATURE;
+ ioaddr->nsect_addr = ioaddr->cmd_addr + SCC_REG_NSECT;
+ ioaddr->lbal_addr = ioaddr->cmd_addr + SCC_REG_LBAL;
+ ioaddr->lbam_addr = ioaddr->cmd_addr + SCC_REG_LBAM;
+ ioaddr->lbah_addr = ioaddr->cmd_addr + SCC_REG_LBAH;
+ ioaddr->device_addr = ioaddr->cmd_addr + SCC_REG_DEVICE;
+ ioaddr->status_addr = ioaddr->cmd_addr + SCC_REG_STATUS;
+ ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD;
+}
+
+static int scc_host_init(struct ata_probe_ent *probe_ent)
+{
+ struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
+ int rc;
+
+ rc = scc_reset_controller(probe_ent);
+ if (rc)
+ return rc;
+
+ probe_ent->n_ports = 1;
+
+ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ return rc;
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ return rc;
+
+ scc_setup_ports(&probe_ent->port[0], probe_ent->iomap[SCC_BMID_BAR]);
+
+ pci_set_master(pdev);
+
+ return 0;
+}
+
+/**
+ * scc_init_one - Register SCC PATA device with kernel services
+ * @pdev: PCI device to register
+ * @ent: Entry in scc_pci_tbl matching with @pdev
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, or -ERRNO value.
+ */
+
+static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int printed_version;
+ unsigned int board_idx = (unsigned int) ent->driver_data;
+ struct device *dev = &pdev->dev;
+ struct ata_probe_ent *probe_ent;
+ int rc;
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "version " DRV_VERSION "\n");
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = pcim_iomap_regions(pdev, (1 << SCC_CTRL_BAR) | (1 << SCC_BMID_BAR), DRV_NAME);
+ if (rc == -EBUSY)
+ pcim_pin_device(pdev);
+ if (rc)
+ return rc;
+
+ probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
+ if (!probe_ent)
+ return -ENOMEM;
+
+ probe_ent->dev = dev;
+ INIT_LIST_HEAD(&probe_ent->node);
+
+ probe_ent->sht = scc_port_info[board_idx].sht;
+ probe_ent->port_flags = scc_port_info[board_idx].flags;
+ probe_ent->pio_mask = scc_port_info[board_idx].pio_mask;
+ probe_ent->udma_mask = scc_port_info[board_idx].udma_mask;
+ probe_ent->port_ops = scc_port_info[board_idx].port_ops;
+
+ probe_ent->irq = pdev->irq;
+ probe_ent->irq_flags = IRQF_SHARED;
+ probe_ent->iomap = pcim_iomap_table(pdev);
+
+ rc = scc_host_init(probe_ent);
+ if (rc)
+ return rc;
+
+ if (!ata_device_add(probe_ent))
+ return -ENODEV;
+
+ devm_kfree(dev, probe_ent);
+ return 0;
+}
+
+static struct pci_driver scc_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = scc_pci_tbl,
+ .probe = scc_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
+#endif
+};
+
+static int __init scc_init (void)
+{
+ int rc;
+
+ DPRINTK("pci_register_driver\n");
+ rc = pci_register_driver(&scc_pci_driver);
+ if (rc)
+ return rc;
+
+ DPRINTK("done\n");
+ return 0;
+}
+
+static void __exit scc_exit (void)
+{
+ pci_unregister_driver(&scc_pci_driver);
+}
+
+module_init(scc_init);
+module_exit(scc_exit);
+
+MODULE_AUTHOR("Toshiba corp");
+MODULE_DESCRIPTION("SCSI low-level driver for Toshiba SCC PATA controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index ad5b43fef3d..dde7eb9f72b 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -41,7 +41,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_serverworks"
-#define DRV_VERSION "0.3.9"
+#define DRV_VERSION "0.4.0"
#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index ed79fabe025..1cb67b221c2 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -33,7 +33,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_sil680"
-#define DRV_VERSION "0.4.1"
+#define DRV_VERSION "0.4.5"
/**
* sil680_selreg - return register base
@@ -139,10 +139,13 @@ static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
unsigned long tfaddr = sil680_selreg(ap, 0x02);
unsigned long addr = sil680_seldev(ap, adev, 0x04);
+ unsigned long addr_mask = 0x80 + 4 * ap->port_no;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int pio = adev->pio_mode - XFER_PIO_0;
int lowest_pio = pio;
+ int port_shift = 4 * adev->devno;
u16 reg;
+ u8 mode;
struct ata_device *pair = ata_dev_pair(adev);
@@ -153,10 +156,17 @@ static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
pci_write_config_word(pdev, tfaddr, speed_t[lowest_pio]);
pci_read_config_word(pdev, tfaddr-2, &reg);
+ pci_read_config_byte(pdev, addr_mask, &mode);
+
reg &= ~0x0200; /* Clear IORDY */
- if (ata_pio_need_iordy(adev))
+ mode &= ~(3 << port_shift); /* Clear IORDY and DMA bits */
+
+ if (ata_pio_need_iordy(adev)) {
reg |= 0x0200; /* Enable IORDY */
+ mode |= 1 << port_shift;
+ }
pci_write_config_word(pdev, tfaddr-2, reg);
+ pci_write_config_byte(pdev, addr_mask, mode);
}
/**
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 560103d55b2..be300923b27 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -32,11 +32,10 @@
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <linux/ata.h>
-#include "libata.h"
+#include "sis.h"
-#undef DRV_NAME /* already defined in libata.h, for libata-core */
#define DRV_NAME "pata_sis"
-#define DRV_VERSION "0.4.5"
+#define DRV_VERSION "0.5.0"
struct sis_chipset {
u16 device; /* PCI host ID */
@@ -151,7 +150,7 @@ static int sis_66_pre_reset(struct ata_port *ap)
if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+ ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
return 0;
}
/* Older chips keep cable detect in bits 4/5 of reg 0x48 */
@@ -197,7 +196,7 @@ static int sis_old_pre_reset(struct ata_port *ap)
if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+ ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
return 0;
}
ap->cbl = ATA_CBL_PATA40;
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 96e890fd645..13e81f0ef1f 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -7,6 +7,13 @@
* SL82C105/Winbond 553 IDE driver
*
* and in part on the documentation and errata sheet
+ *
+ *
+ * Note: The controller like many controllers has shared timings for
+ * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back
+ * in the dma_stop function. Thus we actually don't need a set_dmamode
+ * method as the PIO method is always called and will set the right PIO
+ * timing parameters.
*/
#include <linux/kernel.h>
@@ -19,7 +26,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_sl82c105"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.3.0"
enum {
/*
@@ -126,33 +133,6 @@ static void sl82c105_configure_dmamode(struct ata_port *ap, struct ata_device *a
}
/**
- * sl82c105_set_dmamode - set initial DMA mode data
- * @ap: ATA interface
- * @adev: ATA device
- *
- * Called to do the DMA mode setup. This replaces the PIO timings
- * for the device in question. Set appropriate PIO timings not DMA
- * timings at this point.
- */
-
-static void sl82c105_set_dmamode(struct ata_port *ap, struct ata_device *adev)
-{
- switch(adev->dma_mode) {
- case XFER_MW_DMA_0:
- sl82c105_configure_piomode(ap, adev, 0);
- break;
- case XFER_MW_DMA_1:
- sl82c105_configure_piomode(ap, adev, 3);
- break;
- case XFER_MW_DMA_2:
- sl82c105_configure_piomode(ap, adev, 4);
- break;
- default:
- BUG();
- }
-}
-
-/**
* sl82c105_reset_engine - Reset the DMA engine
* @ap: ATA interface
*
@@ -222,7 +202,7 @@ static void sl82c105_bmdma_stop(struct ata_queued_cmd *qc)
/* This will redo the initial setup of the DMA device to matching
PIO timings */
- sl82c105_set_dmamode(ap, qc->dev);
+ sl82c105_set_piomode(ap, qc->dev);
}
static struct scsi_host_template sl82c105_sht = {
@@ -246,7 +226,6 @@ static struct scsi_host_template sl82c105_sht = {
static struct ata_port_operations sl82c105_port_ops = {
.port_disable = ata_port_disable,
.set_piomode = sl82c105_set_piomode,
- .set_dmamode = sl82c105_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 220fcd6c549..20fc2d0dcfa 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -170,7 +170,7 @@ static int via_pre_reset(struct ata_port *ap)
ap->cbl = ATA_CBL_PATA40;
else
ap->cbl = ATA_CBL_PATA_UNK;
-
+
return ata_std_prereset(ap);
}
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 0888b4f19f4..6c111035fc8 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -17,7 +17,7 @@
#include <linux/platform_device.h>
#define DRV_NAME "pata_winbond"
-#define DRV_VERSION "0.0.1"
+#define DRV_VERSION "0.0.2"
#define NR_HOST 4 /* Two winbond controllers, two channels each */
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 857ac23217a..5dd3ca8b5f2 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -44,7 +44,7 @@
#include <linux/libata.h>
#define DRV_NAME "pdc_adma"
-#define DRV_VERSION "0.04"
+#define DRV_VERSION "0.05"
/* macro to calculate base address for ATA regs */
#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40))
@@ -498,7 +498,7 @@ static inline unsigned int adma_intr_mmio(struct ata_host *host)
if ((status & ATA_BUSY))
continue;
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
- ap->id, qc->tf.protocol, status);
+ ap->print_id, qc->tf.protocol, status);
/* complete taskfile transaction */
pp->state = adma_state_idle;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index d689df52eae..a65ba636aaa 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -35,7 +35,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "0.7"
+#define DRV_VERSION "0.8"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -137,14 +137,19 @@ enum {
PCI_ERR = (1 << 18),
TRAN_LO_DONE = (1 << 19), /* 6xxx: IRQ coalescing */
TRAN_HI_DONE = (1 << 20), /* 6xxx: IRQ coalescing */
+ PORTS_0_3_COAL_DONE = (1 << 8),
+ PORTS_4_7_COAL_DONE = (1 << 17),
PORTS_0_7_COAL_DONE = (1 << 21), /* 6xxx: IRQ coalescing */
GPIO_INT = (1 << 22),
SELF_INT = (1 << 23),
TWSI_INT = (1 << 24),
HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */
+ HC_MAIN_RSVD_5 = (0x1fff << 19), /* bits 31-19 */
HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE |
PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT |
HC_MAIN_RSVD),
+ HC_MAIN_MASKED_IRQS_5 = (PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE |
+ HC_MAIN_RSVD_5),
/* SATAHC registers */
HC_CFG_OFS = 0,
@@ -814,23 +819,27 @@ static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio)
u32 cfg = readl(port_mmio + EDMA_CFG_OFS);
/* set up non-NCQ EDMA configuration */
- cfg &= ~0x1f; /* clear queue depth */
- cfg &= ~EDMA_CFG_NCQ; /* clear NCQ mode */
cfg &= ~(1 << 9); /* disable equeue */
- if (IS_GEN_I(hpriv))
+ if (IS_GEN_I(hpriv)) {
+ cfg &= ~0x1f; /* clear queue depth */
cfg |= (1 << 8); /* enab config burst size mask */
+ }
- else if (IS_GEN_II(hpriv))
+ else if (IS_GEN_II(hpriv)) {
+ cfg &= ~0x1f; /* clear queue depth */
cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN;
+ cfg &= ~(EDMA_CFG_NCQ | EDMA_CFG_NCQ_GO_ON_ERR); /* clear NCQ */
+ }
else if (IS_GEN_IIE(hpriv)) {
- cfg |= (1 << 23); /* dis RX PM port mask */
- cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */
+ cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */
+ cfg |= (1 << 22); /* enab 4-entry host queue cache */
cfg &= ~(1 << 19); /* dis 128-entry queue (for now?) */
cfg |= (1 << 18); /* enab early completion */
- cfg |= (1 << 17); /* enab host q cache */
- cfg |= (1 << 22); /* enab cutthrough */
+ cfg |= (1 << 17); /* enab cut-through (dis stor&forwrd) */
+ cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */
+ cfg &= ~(EDMA_CFG_NCQ | EDMA_CFG_NCQ_GO_ON_ERR); /* clear NCQ */
}
writelfl(cfg, port_mmio + EDMA_CFG_OFS);
@@ -1276,7 +1285,7 @@ static void mv_err_intr(struct ata_port *ap, int reset_allowed)
pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
}
DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x "
- "SERR: 0x%08x\n", ap->id, edma_err_cause, serr);
+ "SERR: 0x%08x\n", ap->print_id, edma_err_cause, serr);
/* Clear EDMA now that SERR cleanup done */
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
@@ -2052,7 +2061,7 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio)
port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS;
/* unused: */
- port->cmd_addr = port->bmdma_addr = port->scr_addr = 0;
+ port->cmd_addr = port->bmdma_addr = port->scr_addr = NULL;
/* Clear any currently outstanding port interrupt conditions */
serr_ofs = mv_scr_offset(SCR_ERROR);
@@ -2240,7 +2249,11 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent,
/* and unmask interrupt generation for host regs */
writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS);
- writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS);
+
+ if (IS_50XX(hpriv))
+ writelfl(~HC_MAIN_MASKED_IRQS_5, mmio + HC_MAIN_IRQ_MASK_OFS);
+ else
+ writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS);
VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x "
"PCI int cause/mask=0x%08x/0x%08x\n",
@@ -2347,7 +2360,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
return rc;
/* Enable interrupts */
- if (msi && !pci_enable_msi(pdev))
+ if (msi && pci_enable_msi(pdev))
pci_intx(pdev, 1);
mv_dump_pci_cfg(pdev, 0x68);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index ab92f208dae..30eed12b363 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -219,6 +219,7 @@ struct nv_adma_port_priv {
void __iomem * gen_block;
void __iomem * notifier_clear_block;
u8 flags;
+ int last_issue_ncq;
};
struct nv_host_priv {
@@ -254,10 +255,7 @@ static int nv_adma_port_suspend(struct ata_port *ap, pm_message_t mesg);
static int nv_adma_port_resume(struct ata_port *ap);
static void nv_adma_error_handler(struct ata_port *ap);
static void nv_adma_host_stop(struct ata_host *host);
-static void nv_adma_bmdma_setup(struct ata_queued_cmd *qc);
-static void nv_adma_bmdma_start(struct ata_queued_cmd *qc);
-static void nv_adma_bmdma_stop(struct ata_queued_cmd *qc);
-static u8 nv_adma_bmdma_status(struct ata_port *ap);
+static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc);
enum nv_host_type
{
@@ -432,16 +430,16 @@ static const struct ata_port_operations nv_adma_ops = {
.exec_command = ata_exec_command,
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
- .bmdma_setup = nv_adma_bmdma_setup,
- .bmdma_start = nv_adma_bmdma_start,
- .bmdma_stop = nv_adma_bmdma_stop,
- .bmdma_status = nv_adma_bmdma_status,
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
.qc_prep = nv_adma_qc_prep,
.qc_issue = nv_adma_qc_issue,
.freeze = nv_ck804_freeze,
.thaw = nv_ck804_thaw,
.error_handler = nv_adma_error_handler,
- .post_internal_cmd = nv_adma_bmdma_stop,
+ .post_internal_cmd = nv_adma_post_internal_cmd,
.data_xfer = ata_data_xfer,
.irq_handler = nv_adma_interrupt,
.irq_clear = nv_adma_irq_clear,
@@ -661,30 +659,31 @@ static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb)
{
unsigned int idx = 0;
- cpb[idx++] = cpu_to_le16((ATA_REG_DEVICE << 8) | tf->device | WNB);
-
- if ((tf->flags & ATA_TFLAG_LBA48) == 0) {
- cpb[idx++] = cpu_to_le16(IGN);
- cpb[idx++] = cpu_to_le16(IGN);
- cpb[idx++] = cpu_to_le16(IGN);
- cpb[idx++] = cpu_to_le16(IGN);
- cpb[idx++] = cpu_to_le16(IGN);
- }
- else {
- cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->hob_feature);
- cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->hob_nsect);
- cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->hob_lbal);
- cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->hob_lbam);
- cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->hob_lbah);
+ if(tf->flags & ATA_TFLAG_ISADDR) {
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->hob_feature | WNB);
+ cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->hob_nsect);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->hob_lbal);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->hob_lbam);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->hob_lbah);
+ cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature);
+ } else
+ cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature | WNB);
+
+ cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->nsect);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->lbal);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->lbam);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->lbah);
}
- cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature);
- cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->nsect);
- cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->lbal);
- cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->lbam);
- cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->lbah);
+
+ if(tf->flags & ATA_TFLAG_DEVICE)
+ cpb[idx++] = cpu_to_le16((ATA_REG_DEVICE << 8) | tf->device);
cpb[idx++] = cpu_to_le16((ATA_REG_CMD << 8) | tf->command | CMDEND);
+ while(idx < 12)
+ cpb[idx++] = cpu_to_le16(IGN);
+
return idx;
}
@@ -741,6 +740,17 @@ static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err)
DPRINTK("Completing qc from tag %d with err_mask %u\n",cpb_num,
qc->err_mask);
ata_qc_complete(qc);
+ } else {
+ struct ata_eh_info *ehi = &ap->eh_info;
+ /* Notifier bits set without a command may indicate the drive
+ is misbehaving. Raise host state machine violation on this
+ condition. */
+ ata_port_printk(ap, KERN_ERR, "notifier for tag %d with no command?\n",
+ cpb_num);
+ ehi->err_mask |= AC_ERR_HSM;
+ ehi->action |= ATA_EH_SOFTRESET;
+ ata_port_freeze(ap);
+ return 1;
}
}
return 0;
@@ -852,22 +862,14 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
if (status & (NV_ADMA_STAT_DONE |
NV_ADMA_STAT_CPBERR)) {
+ u32 check_commands = notifier | notifier_error;
+ int pos, error = 0;
/** Check CPBs for completed commands */
-
- if (ata_tag_valid(ap->active_tag)) {
- /* Non-NCQ command */
- nv_adma_check_cpb(ap, ap->active_tag,
- notifier_error & (1 << ap->active_tag));
- } else {
- int pos, error = 0;
- u32 active = ap->sactive;
-
- while ((pos = ffs(active)) && !error) {
- pos--;
- error = nv_adma_check_cpb(ap, pos,
- notifier_error & (1 << pos) );
- active &= ~(1 << pos );
- }
+ while ((pos = ffs(check_commands)) && !error) {
+ pos--;
+ error = nv_adma_check_cpb(ap, pos,
+ notifier_error & (1 << pos) );
+ check_commands &= ~(1 << pos );
}
}
}
@@ -905,73 +907,12 @@ static void nv_adma_irq_clear(struct ata_port *ap)
iowrite8(ioread8(dma_stat_addr), dma_stat_addr);
}
-static void nv_adma_bmdma_setup(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
- struct nv_adma_port_priv *pp = ap->private_data;
- u8 dmactl;
-
- if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
- WARN_ON(1);
- return;
- }
-
- /* load PRD table addr. */
- iowrite32(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
-
- /* specify data direction, triple-check start bit is clear */
- dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
- dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
- if (!rw)
- dmactl |= ATA_DMA_WR;
-
- iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
- /* issue r/w command */
- ata_exec_command(ap, &qc->tf);
-}
-
-static void nv_adma_bmdma_start(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct nv_adma_port_priv *pp = ap->private_data;
- u8 dmactl;
-
- if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
- WARN_ON(1);
- return;
- }
-
- /* start host DMA transaction */
- dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
- iowrite8(dmactl | ATA_DMA_START,
- ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-}
-
-static void nv_adma_bmdma_stop(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct nv_adma_port_priv *pp = ap->private_data;
-
- if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE))
- return;
-
- /* clear start/stop bit */
- iowrite8(ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START,
- ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
- /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_altstatus(ap); /* dummy read */
-}
-
-static u8 nv_adma_bmdma_status(struct ata_port *ap)
+static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc)
{
- struct nv_adma_port_priv *pp = ap->private_data;
-
- WARN_ON(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE));
+ struct nv_adma_port_priv *pp = qc->ap->private_data;
- return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ if(pp->flags & NV_ADMA_PORT_REGISTER_MODE)
+ ata_bmdma_post_internal_cmd(qc);
}
static int nv_adma_port_start(struct ata_port *ap)
@@ -1040,14 +981,15 @@ static int nv_adma_port_start(struct ata_port *ap)
/* clear GO for register mode, enable interrupt */
tmp = readw(mmio + NV_ADMA_CTL);
- writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+ writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
+ NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw( mmio + NV_ADMA_CTL ); /* flush posted write */
udelay(1);
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw( mmio + NV_ADMA_CTL ); /* flush posted write */
return 0;
}
@@ -1099,14 +1041,15 @@ static int nv_adma_port_resume(struct ata_port *ap)
/* clear GO for register mode, enable interrupt */
tmp = readw(mmio + NV_ADMA_CTL);
- writew((tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+ writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
+ NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw( mmio + NV_ADMA_CTL ); /* flush posted write */
udelay(1);
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw( mmio + NV_ADMA_CTL ); /* flush posted write */
return 0;
}
@@ -1163,11 +1106,7 @@ static void nv_adma_fill_aprd(struct ata_queued_cmd *qc,
int idx,
struct nv_adma_prd *aprd)
{
- u8 flags;
-
- memset(aprd, 0, sizeof(struct nv_adma_prd));
-
- flags = 0;
+ u8 flags = 0;
if (qc->tf.flags & ATA_TFLAG_WRITE)
flags |= NV_APRD_WRITE;
if (idx == qc->n_elem - 1)
@@ -1178,6 +1117,7 @@ static void nv_adma_fill_aprd(struct ata_queued_cmd *qc,
aprd->addr = cpu_to_le64(((u64)sg_dma_address(sg)));
aprd->len = cpu_to_le32(((u32)sg_dma_len(sg))); /* len in bytes */
aprd->flags = flags;
+ aprd->packet_len = 0;
}
static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb)
@@ -1198,6 +1138,8 @@ static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb)
}
if (idx > 5)
cpb->next_aprd = cpu_to_le64(((u64)(pp->aprd_dma + NV_ADMA_SGTBL_SZ * qc->tag)));
+ else
+ cpb->next_aprd = cpu_to_le64(0);
}
static int nv_adma_use_reg_mode(struct ata_queued_cmd *qc)
@@ -1230,7 +1172,10 @@ static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
return;
}
- memset(cpb, 0, sizeof(struct nv_adma_cpb));
+ cpb->resp_flags = NV_CPB_RESP_DONE;
+ wmb();
+ cpb->ctl_flags = 0;
+ wmb();
cpb->len = 3;
cpb->tag = qc->tag;
@@ -1254,12 +1199,15 @@ static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
finished filling in all of the contents */
wmb();
cpb->ctl_flags = ctl_flags;
+ wmb();
+ cpb->resp_flags = 0;
}
static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
{
struct nv_adma_port_priv *pp = qc->ap->private_data;
void __iomem *mmio = pp->ctl_block;
+ int curr_ncq = (qc->tf.protocol == ATA_PROT_NCQ);
VPRINTK("ENTER\n");
@@ -1274,6 +1222,14 @@ static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
/* write append register, command tag in lower 8 bits
and (number of cpbs to append -1) in top 8 bits */
wmb();
+
+ if(curr_ncq != pp->last_issue_ncq) {
+ /* Seems to need some delay before switching between NCQ and non-NCQ
+ commands, else we get command timeouts and such. */
+ udelay(20);
+ pp->last_issue_ncq = curr_ncq;
+ }
+
writew(qc->tag, mmio + NV_ADMA_APPEND);
DPRINTK("Issued tag %u\n",qc->tag);
@@ -1447,6 +1403,30 @@ static void nv_adma_error_handler(struct ata_port *ap)
int i;
u16 tmp;
+ if(ata_tag_valid(ap->active_tag) || ap->sactive) {
+ u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
+ u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
+ u32 gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL);
+ u32 status = readw(mmio + NV_ADMA_STAT);
+ u8 cpb_count = readb(mmio + NV_ADMA_CPB_COUNT);
+ u8 next_cpb_idx = readb(mmio + NV_ADMA_NEXT_CPB_IDX);
+
+ ata_port_printk(ap, KERN_ERR, "EH in ADMA mode, notifier 0x%X "
+ "notifier_error 0x%X gen_ctl 0x%X status 0x%X "
+ "next cpb count 0x%X next cpb idx 0x%x\n",
+ notifier, notifier_error, gen_ctl, status,
+ cpb_count, next_cpb_idx);
+
+ for( i=0;i<NV_ADMA_MAX_CPBS;i++) {
+ struct nv_adma_cpb *cpb = &pp->cpb[i];
+ if( (ata_tag_valid(ap->active_tag) && i == ap->active_tag) ||
+ ap->sactive & (1 << i) )
+ ata_port_printk(ap, KERN_ERR,
+ "CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n",
+ i, cpb->ctl_flags, cpb->resp_flags);
+ }
+ }
+
/* Push us back into port register mode for error handling. */
nv_adma_register_mode(ap);
@@ -1460,10 +1440,10 @@ static void nv_adma_error_handler(struct ata_port *ap)
/* Reset channel */
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw( mmio + NV_ADMA_CTL ); /* flush posted write */
udelay(1);
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw( mmio + NV_ADMA_CTL ); /* flush posted write */
}
ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index cf9ed8c3930..2339813ce9f 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -45,7 +45,7 @@
#include "sata_promise.h"
#define DRV_NAME "sata_promise"
-#define DRV_VERSION "1.05"
+#define DRV_VERSION "2.00"
enum {
@@ -218,6 +218,7 @@ static const struct ata_port_operations pdc_pata_ops = {
.freeze = pdc_freeze,
.thaw = pdc_thaw,
.error_handler = pdc_error_handler,
+ .post_internal_cmd = pdc_post_internal_cmd,
.data_xfer = ata_data_xfer,
.irq_handler = pdc_interrupt,
.irq_clear = pdc_irq_clear,
@@ -776,7 +777,8 @@ static int pdc_old_check_atapi_dma(struct ata_queued_cmd *qc)
return pdc_check_atapi_dma(qc);
}
-static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
+static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base,
+ void __iomem *scr_addr)
{
port->cmd_addr = base;
port->data_addr = base;
@@ -791,6 +793,7 @@ static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
port->status_addr = base + 0x1c;
port->altstatus_addr =
port->ctl_addr = base + 0x38;
+ port->scr_addr = scr_addr;
}
@@ -903,11 +906,8 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
base = probe_ent->iomap[PDC_MMIO_BAR];
- pdc_ata_setup_port(&probe_ent->port[0], base + 0x200);
- pdc_ata_setup_port(&probe_ent->port[1], base + 0x280);
-
- probe_ent->port[0].scr_addr = base + 0x400;
- probe_ent->port[1].scr_addr = base + 0x500;
+ pdc_ata_setup_port(&probe_ent->port[0], base + 0x200, base + 0x400);
+ pdc_ata_setup_port(&probe_ent->port[1], base + 0x280, base + 0x500);
/* notice 4-port boards */
switch (board_idx) {
@@ -916,12 +916,8 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
/* Fall through */
case board_20319:
probe_ent->n_ports = 4;
-
- pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
- pdc_ata_setup_port(&probe_ent->port[3], base + 0x380);
-
- probe_ent->port[2].scr_addr = base + 0x600;
- probe_ent->port[3].scr_addr = base + 0x700;
+ pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, base + 0x600);
+ pdc_ata_setup_port(&probe_ent->port[3], base + 0x380, base + 0x700);
break;
case board_2057x:
hp->flags |= PDC_FLAG_GEN_II;
@@ -931,7 +927,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
tmp = readb(base + PDC_FLASH_CTL+1);
if (!(tmp & 0x80)) {
probe_ent->n_ports = 3;
- pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
+ pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, NULL);
hp->port_flags[2] = ATA_FLAG_SLAVE_POSS;
printk(KERN_INFO DRV_NAME " PATA port found\n");
} else
@@ -941,12 +937,8 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
break;
case board_20619:
probe_ent->n_ports = 4;
-
- pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
- pdc_ata_setup_port(&probe_ent->port[3], base + 0x380);
-
- probe_ent->port[2].scr_addr = base + 0x600;
- probe_ent->port[3].scr_addr = base + 0x700;
+ pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, NULL);
+ pdc_ata_setup_port(&probe_ent->port[3], base + 0x380, NULL);
break;
default:
BUG();
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 6097d8f2a0c..8786b45f291 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -39,7 +39,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_qstor"
-#define DRV_VERSION "0.06"
+#define DRV_VERSION "0.07"
enum {
QS_MMIO_BAR = 4,
@@ -446,7 +446,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host *host)
if ((status & ATA_BUSY))
continue;
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
- ap->id, qc->tf.protocol, status);
+ ap->print_id, qc->tf.protocol, status);
/* complete taskfile transaction */
pp->state = qs_state_idle;
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index dca3d3749f0..f7179c646be 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -46,7 +46,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_sil"
-#define DRV_VERSION "2.0"
+#define DRV_VERSION "2.1"
enum {
SIL_MMIO_BAR = 5,
@@ -339,7 +339,7 @@ static inline void __iomem *sil_scr_addr(struct ata_port *ap, unsigned int sc_re
break;
}
- return 0;
+ return NULL;
}
static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg)
@@ -386,9 +386,15 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
goto freeze;
}
- if (unlikely(!qc || qc->tf.ctl & ATA_NIEN))
+ if (unlikely(!qc))
goto freeze;
+ if (unlikely(qc->tf.flags & ATA_TFLAG_POLLING)) {
+ /* this sometimes happens, just clear IRQ */
+ ata_chk_status(ap);
+ return;
+ }
+
/* Check whether we are expecting interrupt in this state */
switch (ap->hsm_task_state) {
case HSM_ST_FIRST:
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index e65e8d55da3..5d083f43f90 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -30,7 +30,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_sil24"
-#define DRV_VERSION "0.3"
+#define DRV_VERSION "0.8"
/*
* Port request block (PRB) 32 bytes
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 49c9e2bd706..1879e0cd56a 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -40,9 +40,8 @@
#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
-#include "libata.h"
+#include "sis.h"
-#undef DRV_NAME /* already defined in libata.h, for libata-core */
#define DRV_NAME "sata_sis"
#define DRV_VERSION "0.7"
@@ -310,7 +309,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
case 0x10:
ppi[1] = &sis_info133;
break;
-
+
case 0x30:
ppi[0] = &sis_info133;
break;
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 4e428999420..b121195cc59 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -53,7 +53,7 @@
#endif /* CONFIG_PPC_OF */
#define DRV_NAME "sata_svw"
-#define DRV_VERSION "2.0"
+#define DRV_VERSION "2.1"
enum {
K2_FLAG_NO_ATAPI_DMA = (1 << 29),
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 0ebd77b080d..1a081c3a8c0 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -44,7 +44,7 @@
#include "sata_promise.h"
#define DRV_NAME "sata_sx4"
-#define DRV_VERSION "0.9"
+#define DRV_VERSION "0.10"
enum {
@@ -421,7 +421,7 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc)
WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP));
- VPRINTK("ata%u: ENTER\n", ap->id);
+ VPRINTK("ata%u: ENTER\n", ap->print_id);
/* hard-code chip #0 */
mmio += PDC_CHIP0_OFS;
@@ -478,7 +478,7 @@ static void pdc20621_nodata_prep(struct ata_queued_cmd *qc)
unsigned int portno = ap->port_no;
unsigned int i;
- VPRINTK("ata%u: ENTER\n", ap->id);
+ VPRINTK("ata%u: ENTER\n", ap->print_id);
/* hard-code chip #0 */
mmio += PDC_CHIP0_OFS;
@@ -605,7 +605,7 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc)
/* hard-code chip #0 */
mmio += PDC_CHIP0_OFS;
- VPRINTK("ata%u: ENTER\n", ap->id);
+ VPRINTK("ata%u: ENTER\n", ap->print_id);
wmb(); /* flush PRD, pkt writes */
@@ -672,7 +672,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
/* step two - DMA from DIMM to host */
if (doing_hdma) {
- VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->id,
+ VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->print_id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* get drive status; clear intr; complete txn */
qc->err_mask |= ac_err_mask(ata_wait_idle(ap));
@@ -683,7 +683,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
/* step one - exec ATA command */
else {
u8 seq = (u8) (port_no + 1 + 4);
- VPRINTK("ata%u: read ata, 0x%x 0x%x\n", ap->id,
+ VPRINTK("ata%u: read ata, 0x%x 0x%x\n", ap->print_id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* submit hdma pkt */
@@ -698,7 +698,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
/* step one - DMA from host to DIMM */
if (doing_hdma) {
u8 seq = (u8) (port_no + 1);
- VPRINTK("ata%u: write hdma, 0x%x 0x%x\n", ap->id,
+ VPRINTK("ata%u: write hdma, 0x%x 0x%x\n", ap->print_id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* submit ata pkt */
@@ -711,7 +711,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
/* step two - execute ATA command */
else {
- VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->id,
+ VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->print_id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* get drive status; clear intr; complete txn */
qc->err_mask |= ac_err_mask(ata_wait_idle(ap));
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 80131eec68f..d659ace80f4 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -36,7 +36,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_uli"
-#define DRV_VERSION "1.0"
+#define DRV_VERSION "1.1"
enum {
uli_5289 = 0,
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index baca6d79bb0..598e6a26a48 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -46,7 +46,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_via"
-#define DRV_VERSION "2.0"
+#define DRV_VERSION "2.1"
enum board_ids_enum {
vt6420,
@@ -60,7 +60,7 @@ enum {
SATA_PATA_SHARING = 0x49, /* PATA/SATA sharing func ctrl */
PATA_UDMA_TIMING = 0xB3, /* PATA timing for DMA/ cable detect */
PATA_PIO_TIMING = 0xAB, /* PATA timing register */
-
+
PORT0 = (1 << 1),
PORT1 = (1 << 0),
ALL_PORTS = PORT0 | PORT1,
@@ -151,7 +151,7 @@ static const struct ata_port_operations vt6420_sata_ops = {
static const struct ata_port_operations vt6421_pata_ops = {
.port_disable = ata_port_disable,
-
+
.set_piomode = vt6421_set_pio_mode,
.set_dmamode = vt6421_set_dma_mode,
@@ -185,7 +185,7 @@ static const struct ata_port_operations vt6421_pata_ops = {
static const struct ata_port_operations vt6421_sata_ops = {
.port_disable = ata_port_disable,
-
+
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
@@ -423,16 +423,21 @@ static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev)
{
struct ata_probe_ent *probe_ent;
struct ata_port_info *ppi[2];
- void __iomem * const *iomap;
+ void __iomem *bar5;
ppi[0] = ppi[1] = &vt6420_port_info;
probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent)
return NULL;
- iomap = pcim_iomap_table(pdev);
- probe_ent->port[0].scr_addr = svia_scr_addr(iomap[5], 0);
- probe_ent->port[1].scr_addr = svia_scr_addr(iomap[5], 1);
+ bar5 = pcim_iomap(pdev, 5, 0);
+ if (!bar5) {
+ dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n");
+ return NULL;
+ }
+
+ probe_ent->port[0].scr_addr = svia_scr_addr(bar5, 0);
+ probe_ent->port[1].scr_addr = svia_scr_addr(bar5, 1);
return probe_ent;
}
@@ -460,6 +465,13 @@ static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev)
probe_ent->mwdma_mask = 0x07;
probe_ent->udma_mask = 0x7f;
+ for (i = 0; i < 6; i++)
+ if (!pcim_iomap(pdev, i, 0)) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "failed to iomap PCI BAR %d\n", i);
+ return NULL;
+ }
+
for (i = 0; i < N_PORTS; i++)
vt6421_init_addrs(probe_ent, pcim_iomap_table(pdev), i);
@@ -522,7 +534,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
return rc;
- rc = pcim_iomap_regions(pdev, 0x1f, DRV_NAME);
+ rc = pci_request_regions(pdev, DRV_NAME);
if (rc) {
pcim_pin_device(pdev);
return rc;
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 2fd037bde09..170bad1b415 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -47,7 +47,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_vsc"
-#define DRV_VERSION "2.0"
+#define DRV_VERSION "2.1"
enum {
VSC_MMIO_BAR = 0,
@@ -98,10 +98,6 @@ enum {
VSC_SATA_INT_PHY_CHANGE),
};
-#define is_vsc_sata_int_err(port_idx, int_status) \
- (int_status & (VSC_SATA_INT_ERROR << (8 * port_idx)))
-
-
static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
if (sc_reg > SCR_CONTROL)
@@ -119,6 +115,28 @@ static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
}
+static void vsc_freeze(struct ata_port *ap)
+{
+ void __iomem *mask_addr;
+
+ mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
+ VSC_SATA_INT_MASK_OFFSET + ap->port_no;
+
+ writeb(0, mask_addr);
+}
+
+
+static void vsc_thaw(struct ata_port *ap)
+{
+ void __iomem *mask_addr;
+
+ mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
+ VSC_SATA_INT_MASK_OFFSET + ap->port_no;
+
+ writeb(0xff, mask_addr);
+}
+
+
static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
{
void __iomem *mask_addr;
@@ -203,6 +221,36 @@ static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
}
}
+static inline void vsc_error_intr(u8 port_status, struct ata_port *ap)
+{
+ if (port_status & (VSC_SATA_INT_PHY_CHANGE | VSC_SATA_INT_ERROR_M))
+ ata_port_freeze(ap);
+ else
+ ata_port_abort(ap);
+}
+
+static void vsc_port_intr(u8 port_status, struct ata_port *ap)
+{
+ struct ata_queued_cmd *qc;
+ int handled = 0;
+
+ if (unlikely(port_status & VSC_SATA_INT_ERROR)) {
+ vsc_error_intr(port_status, ap);
+ return;
+ }
+
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
+ handled = ata_host_intr(ap, qc);
+
+ /* We received an interrupt during a polled command,
+ * or some other spurious condition. Interrupt reporting
+ * with this hardware is fairly reliable so it is safe to
+ * simply clear the interrupt
+ */
+ if (unlikely(!handled))
+ ata_chk_status(ap);
+}
/*
* vsc_sata_interrupt
@@ -214,59 +262,36 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance)
struct ata_host *host = dev_instance;
unsigned int i;
unsigned int handled = 0;
- u32 int_status;
-
- spin_lock(&host->lock);
+ u32 status;
- int_status = readl(host->iomap[VSC_MMIO_BAR] +
- VSC_SATA_INT_STAT_OFFSET);
+ status = readl(host->iomap[VSC_MMIO_BAR] + VSC_SATA_INT_STAT_OFFSET);
- for (i = 0; i < host->n_ports; i++) {
- if (int_status & ((u32) 0xFF << (8 * i))) {
- struct ata_port *ap;
+ if (unlikely(status == 0xffffffff || status == 0)) {
+ if (status)
+ dev_printk(KERN_ERR, host->dev,
+ ": IRQ status == 0xffffffff, "
+ "PCI fault or device removal?\n");
+ goto out;
+ }
- ap = host->ports[i];
+ spin_lock(&host->lock);
- if (is_vsc_sata_int_err(i, int_status)) {
- u32 err_status;
- printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__);
- err_status = ap ? vsc_sata_scr_read(ap, SCR_ERROR) : 0;
- vsc_sata_scr_write(ap, SCR_ERROR, err_status);
- handled++;
- }
+ for (i = 0; i < host->n_ports; i++) {
+ u8 port_status = (status >> (8 * i)) & 0xff;
+ if (port_status) {
+ struct ata_port *ap = host->ports[i];
if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
- struct ata_queued_cmd *qc;
-
- qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
- handled += ata_host_intr(ap, qc);
- else if (is_vsc_sata_int_err(i, int_status)) {
- /*
- * On some chips (i.e. Intel 31244), an error
- * interrupt will sneak in at initialization
- * time (phy state changes). Clearing the SCR
- * error register is not required, but it prevents
- * the phy state change interrupts from recurring
- * later.
- */
- u32 err_status;
- err_status = vsc_sata_scr_read(ap, SCR_ERROR);
- printk(KERN_DEBUG "%s: clearing interrupt, "
- "status %x; sata err status %x\n",
- __FUNCTION__,
- int_status, err_status);
- vsc_sata_scr_write(ap, SCR_ERROR, err_status);
- /* Clear interrupt status */
- ata_chk_status(ap);
- handled++;
- }
- }
+ vsc_port_intr(port_status, ap);
+ handled++;
+ } else
+ dev_printk(KERN_ERR, host->dev,
+ ": interrupt from disabled port %d\n", i);
}
}
spin_unlock(&host->lock);
-
+out:
return IRQ_RETVAL(handled);
}
@@ -304,8 +329,8 @@ static const struct ata_port_operations vsc_sata_ops = {
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
+ .freeze = vsc_freeze,
+ .thaw = vsc_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.irq_handler = vsc_sata_interrupt,
diff --git a/drivers/ata/sis.h b/drivers/ata/sis.h
new file mode 100644
index 00000000000..231da8fc220
--- /dev/null
+++ b/drivers/ata/sis.h
@@ -0,0 +1,5 @@
+
+struct ata_port_info;
+
+/* pata_sis.c */
+extern struct ata_port_info sis_info133;
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 272736e3799..c331da2da5f 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -282,7 +282,6 @@ struct ata_taskfile {
};
#define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0)
-#define ata_id_is_sata(id) ((id)[93] == 0)
#define ata_id_rahead_enabled(id) ((id)[85] & (1 << 6))
#define ata_id_wcache_enabled(id) ((id)[85] & (1 << 5))
#define ata_id_hpa_enabled(id) ((id)[85] & (1 << 10))
@@ -324,6 +323,11 @@ static inline unsigned int ata_id_major_version(const u16 *id)
return mver;
}
+static inline int ata_id_is_sata(const u16 *id)
+{
+ return ata_id_major_version(id) >= 5 && id[93] == 0;
+}
+
static inline int ata_id_current_chs_valid(const u16 *id)
{
/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
@@ -350,7 +354,7 @@ static inline int ata_id_is_cfa(const u16 *id)
static inline int ata_drive_40wire(const u16 *dev_id)
{
- if (ata_id_major_version(dev_id) >= 5 && ata_id_is_sata(dev_id))
+ if (ata_id_is_sata(dev_id))
return 0; /* SATA */
if ((dev_id[93] & 0xE000) == 0x6000)
return 0; /* 80 wire */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 86762a9f52b..045fb3a72d5 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -495,6 +495,7 @@ struct ata_device {
/* error history */
struct ata_ering ering;
+ int spdn_cnt;
unsigned int horkage; /* List of broken features */
#ifdef CONFIG_SATA_ACPI
/* ACPI objects info */
@@ -535,8 +536,8 @@ struct ata_port {
spinlock_t *lock;
unsigned long flags; /* ATA_FLAG_xxx */
unsigned int pflags; /* ATA_PFLAG_xxx */
- unsigned int id; /* unique id req'd by scsi midlyr */
- unsigned int port_no; /* unique port #; from zero */
+ unsigned int print_id; /* user visible unique port ID */
+ unsigned int port_no; /* 0 based port no. inside the host */
struct ata_prd *prd; /* our SG list */
dma_addr_t prd_dma; /* and its DMA mapping */
@@ -759,6 +760,7 @@ extern void ata_port_queue_task(struct ata_port *ap, work_func_t fn,
extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
unsigned long interval_msec,
unsigned long timeout_msec);
+extern unsigned int ata_dev_try_classify(struct ata_port *, unsigned int, u8 *);
/*
* Default driver ops implementations
@@ -786,10 +788,12 @@ extern void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf,
extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem);
extern unsigned int ata_dev_classify(const struct ata_taskfile *tf);
+extern void ata_dev_disable(struct ata_device *adev);
extern void ata_id_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len);
extern void ata_id_c_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len);
+extern void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown);
extern unsigned long ata_device_blacklisted(const struct ata_device *dev);
extern void ata_bmdma_setup (struct ata_queued_cmd *qc);
extern void ata_bmdma_start (struct ata_queued_cmd *qc);
@@ -890,10 +894,10 @@ extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
* printk helpers
*/
#define ata_port_printk(ap, lv, fmt, args...) \
- printk(lv"ata%u: "fmt, (ap)->id , ##args)
+ printk(lv"ata%u: "fmt, (ap)->print_id , ##args)
#define ata_dev_printk(dev, lv, fmt, args...) \
- printk(lv"ata%u.%02u: "fmt, (dev)->ap->id, (dev)->devno , ##args)
+ printk(lv"ata%u.%02u: "fmt, (dev)->ap->print_id, (dev)->devno , ##args)
/*
* ata_eh_info helpers
@@ -1031,6 +1035,21 @@ static inline u8 ata_chk_status(struct ata_port *ap)
return ap->ops->check_status(ap);
}
+/**
+ * ata_ncq_enabled - Test whether NCQ is enabled
+ * @dev: ATA device to test for
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * 1 if NCQ is enabled for @dev, 0 otherwise.
+ */
+static inline int ata_ncq_enabled(struct ata_device *dev)
+{
+ return (dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ_OFF |
+ ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ;
+}
/**
* ata_pause - Flush writes and pause 400 nanoseconds.