aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/edac/amd76x_edac.c356
-rw-r--r--drivers/edac/e752x_edac.c1069
-rw-r--r--drivers/edac/e7xxx_edac.c558
3 files changed, 1983 insertions, 0 deletions
diff --git a/drivers/edac/amd76x_edac.c b/drivers/edac/amd76x_edac.c
new file mode 100644
index 00000000000..8e2b1295e70
--- /dev/null
+++ b/drivers/edac/amd76x_edac.c
@@ -0,0 +1,356 @@
+/*
+ * AMD 76x Memory Controller kernel module
+ * (C) 2003 Linux Networx (http://lnxi.com)
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written by Thayne Harbaugh
+ * Based on work by Dan Hollis <goemon at anime dot net> and others.
+ * http://www.anime.net/~goemon/linux-ecc/
+ *
+ * $Id: edac_amd76x.c,v 1.4.2.5 2005/10/05 00:43:44 dsp_llnl Exp $
+ *
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include <linux/slab.h>
+
+#include "edac_mc.h"
+
+
+#define AMD76X_NR_CSROWS 8
+#define AMD76X_NR_CHANS 1
+#define AMD76X_NR_DIMMS 4
+
+
+/* AMD 76x register addresses - device 0 function 0 - PCI bridge */
+#define AMD76X_ECC_MODE_STATUS 0x48 /* Mode and status of ECC (32b)
+ *
+ * 31:16 reserved
+ * 15:14 SERR enabled: x1=ue 1x=ce
+ * 13 reserved
+ * 12 diag: disabled, enabled
+ * 11:10 mode: dis, EC, ECC, ECC+scrub
+ * 9:8 status: x1=ue 1x=ce
+ * 7:4 UE cs row
+ * 3:0 CE cs row
+ */
+#define AMD76X_DRAM_MODE_STATUS 0x58 /* DRAM Mode and status (32b)
+ *
+ * 31:26 clock disable 5 - 0
+ * 25 SDRAM init
+ * 24 reserved
+ * 23 mode register service
+ * 22:21 suspend to RAM
+ * 20 burst refresh enable
+ * 19 refresh disable
+ * 18 reserved
+ * 17:16 cycles-per-refresh
+ * 15:8 reserved
+ * 7:0 x4 mode enable 7 - 0
+ */
+#define AMD76X_MEM_BASE_ADDR 0xC0 /* Memory base address (8 x 32b)
+ *
+ * 31:23 chip-select base
+ * 22:16 reserved
+ * 15:7 chip-select mask
+ * 6:3 reserved
+ * 2:1 address mode
+ * 0 chip-select enable
+ */
+
+
+struct amd76x_error_info {
+ u32 ecc_mode_status;
+};
+
+
+enum amd76x_chips {
+ AMD761 = 0,
+ AMD762
+};
+
+
+struct amd76x_dev_info {
+ const char *ctl_name;
+};
+
+
+static const struct amd76x_dev_info amd76x_devs[] = {
+ [AMD761] = {.ctl_name = "AMD761"},
+ [AMD762] = {.ctl_name = "AMD762"},
+};
+
+
+/**
+ * amd76x_get_error_info - fetch error information
+ * @mci: Memory controller
+ * @info: Info to fill in
+ *
+ * Fetch and store the AMD76x ECC status. Clear pending status
+ * on the chip so that further errors will be reported
+ */
+
+static void amd76x_get_error_info (struct mem_ctl_info *mci,
+ struct amd76x_error_info *info)
+{
+ pci_read_config_dword(mci->pdev, AMD76X_ECC_MODE_STATUS,
+ &info->ecc_mode_status);
+
+ if (info->ecc_mode_status & BIT(8))
+ pci_write_bits32(mci->pdev, AMD76X_ECC_MODE_STATUS,
+ (u32) BIT(8), (u32) BIT(8));
+
+ if (info->ecc_mode_status & BIT(9))
+ pci_write_bits32(mci->pdev, AMD76X_ECC_MODE_STATUS,
+ (u32) BIT(9), (u32) BIT(9));
+}
+
+
+/**
+ * amd76x_process_error_info - Error check
+ * @mci: Memory controller
+ * @info: Previously fetched information from chip
+ * @handle_errors: 1 if we should do recovery
+ *
+ * Process the chip state and decide if an error has occurred.
+ * A return of 1 indicates an error. Also if handle_errors is true
+ * then attempt to handle and clean up after the error
+ */
+
+static int amd76x_process_error_info (struct mem_ctl_info *mci,
+ struct amd76x_error_info *info, int handle_errors)
+{
+ int error_found;
+ u32 row;
+
+ error_found = 0;
+
+ /*
+ * Check for an uncorrectable error
+ */
+ if (info->ecc_mode_status & BIT(8)) {
+ error_found = 1;
+
+ if (handle_errors) {
+ row = (info->ecc_mode_status >> 4) & 0xf;
+ edac_mc_handle_ue(mci,
+ mci->csrows[row].first_page, 0, row,
+ mci->ctl_name);
+ }
+ }
+
+ /*
+ * Check for a correctable error
+ */
+ if (info->ecc_mode_status & BIT(9)) {
+ error_found = 1;
+
+ if (handle_errors) {
+ row = info->ecc_mode_status & 0xf;
+ edac_mc_handle_ce(mci,
+ mci->csrows[row].first_page, 0, 0, row, 0,
+ mci->ctl_name);
+ }
+ }
+ return error_found;
+}
+
+/**
+ * amd76x_check - Poll the controller
+ * @mci: Memory controller
+ *
+ * Called by the poll handlers this function reads the status
+ * from the controller and checks for errors.
+ */
+
+static void amd76x_check(struct mem_ctl_info *mci)
+{
+ struct amd76x_error_info info;
+ debugf3("MC: " __FILE__ ": %s()\n", __func__);
+ amd76x_get_error_info(mci, &info);
+ amd76x_process_error_info(mci, &info, 1);
+}
+
+
+/**
+ * amd76x_probe1 - Perform set up for detected device
+ * @pdev; PCI device detected
+ * @dev_idx: Device type index
+ *
+ * We have found an AMD76x and now need to set up the memory
+ * controller status reporting. We configure and set up the
+ * memory controller reporting and claim the device.
+ */
+
+static int amd76x_probe1(struct pci_dev *pdev, int dev_idx)
+{
+ int rc = -ENODEV;
+ int index;
+ struct mem_ctl_info *mci = NULL;
+ enum edac_type ems_modes[] = {
+ EDAC_NONE,
+ EDAC_EC,
+ EDAC_SECDED,
+ EDAC_SECDED
+ };
+ u32 ems;
+ u32 ems_mode;
+
+ debugf0("MC: " __FILE__ ": %s()\n", __func__);
+
+ pci_read_config_dword(pdev, AMD76X_ECC_MODE_STATUS, &ems);
+ ems_mode = (ems >> 10) & 0x3;
+
+ mci = edac_mc_alloc(0, AMD76X_NR_CSROWS, AMD76X_NR_CHANS);
+
+ if (mci == NULL) {
+ rc = -ENOMEM;
+ goto fail;
+ }
+
+ debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
+
+ mci->pdev = pci_dev_get(pdev);
+ mci->mtype_cap = MEM_FLAG_RDDR;
+
+ mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
+ mci->edac_cap = ems_mode ?
+ (EDAC_FLAG_EC | EDAC_FLAG_SECDED) : EDAC_FLAG_NONE;
+
+ mci->mod_name = BS_MOD_STR;
+ mci->mod_ver = "$Revision: 1.4.2.5 $";
+ mci->ctl_name = amd76x_devs[dev_idx].ctl_name;
+ mci->edac_check = amd76x_check;
+ mci->ctl_page_to_phys = NULL;
+
+ for (index = 0; index < mci->nr_csrows; index++) {
+ struct csrow_info *csrow = &mci->csrows[index];
+ u32 mba;
+ u32 mba_base;
+ u32 mba_mask;
+ u32 dms;
+
+ /* find the DRAM Chip Select Base address and mask */
+ pci_read_config_dword(mci->pdev,
+ AMD76X_MEM_BASE_ADDR + (index * 4),
+ &mba);
+
+ if (!(mba & BIT(0)))
+ continue;
+
+ mba_base = mba & 0xff800000UL;
+ mba_mask = ((mba & 0xff80) << 16) | 0x7fffffUL;
+
+ pci_read_config_dword(mci->pdev, AMD76X_DRAM_MODE_STATUS,
+ &dms);
+
+ csrow->first_page = mba_base >> PAGE_SHIFT;
+ csrow->nr_pages = (mba_mask + 1) >> PAGE_SHIFT;
+ csrow->last_page = csrow->first_page + csrow->nr_pages - 1;
+ csrow->page_mask = mba_mask >> PAGE_SHIFT;
+ csrow->grain = csrow->nr_pages << PAGE_SHIFT;
+ csrow->mtype = MEM_RDDR;
+ csrow->dtype = ((dms >> index) & 0x1) ? DEV_X4 : DEV_UNKNOWN;
+ csrow->edac_mode = ems_modes[ems_mode];
+ }
+
+ /* clear counters */
+ pci_write_bits32(mci->pdev, AMD76X_ECC_MODE_STATUS, (u32) (0x3 << 8),
+ (u32) (0x3 << 8));
+
+ if (edac_mc_add_mc(mci)) {
+ debugf3("MC: " __FILE__
+ ": %s(): failed edac_mc_add_mc()\n", __func__);
+ goto fail;
+ }
+
+ /* get this far and it's successful */
+ debugf3("MC: " __FILE__ ": %s(): success\n", __func__);
+ return 0;
+
+fail:
+ if (mci) {
+ if(mci->pdev)
+ pci_dev_put(mci->pdev);
+ edac_mc_free(mci);
+ }
+ return rc;
+}
+
+/* returns count (>= 0), or negative on error */
+static int __devinit amd76x_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ debugf0("MC: " __FILE__ ": %s()\n", __func__);
+
+ /* don't need to call pci_device_enable() */
+ return amd76x_probe1(pdev, ent->driver_data);
+}
+
+
+/**
+ * amd76x_remove_one - driver shutdown
+ * @pdev: PCI device being handed back
+ *
+ * Called when the driver is unloaded. Find the matching mci
+ * structure for the device then delete the mci and free the
+ * resources.
+ */
+
+static void __devexit amd76x_remove_one(struct pci_dev *pdev)
+{
+ struct mem_ctl_info *mci;
+
+ debugf0(__FILE__ ": %s()\n", __func__);
+
+ if ((mci = edac_mc_find_mci_by_pdev(pdev)) == NULL)
+ return;
+ if (edac_mc_del_mc(mci))
+ return;
+ pci_dev_put(mci->pdev);
+ edac_mc_free(mci);
+}
+
+
+static const struct pci_device_id amd76x_pci_tbl[] __devinitdata = {
+ {PCI_VEND_DEV(AMD, FE_GATE_700C), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ AMD762},
+ {PCI_VEND_DEV(AMD, FE_GATE_700E), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ AMD761},
+ {0,} /* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, amd76x_pci_tbl);
+
+
+static struct pci_driver amd76x_driver = {
+ .name = BS_MOD_STR,
+ .probe = amd76x_init_one,
+ .remove = __devexit_p(amd76x_remove_one),
+ .id_table = amd76x_pci_tbl,
+};
+
+int __init amd76x_init(void)
+{
+ return pci_register_driver(&amd76x_driver);
+}
+
+static void __exit amd76x_exit(void)
+{
+ pci_unregister_driver(&amd76x_driver);
+}
+
+module_init(amd76x_init);
+module_exit(amd76x_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh");
+MODULE_DESCRIPTION("MC support for AMD 76x memory controllers");
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
new file mode 100644
index 00000000000..959f584f568
--- /dev/null
+++ b/drivers/edac/e752x_edac.c
@@ -0,0 +1,1069 @@
+/*
+ * Intel e752x Memory Controller kernel module
+ * (C) 2004 Linux Networx (http://lnxi.com)
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * See "enum e752x_chips" below for supported chipsets
+ *
+ * Written by Tom Zimmerman
+ *
+ * Contributors:
+ * Thayne Harbaugh at realmsys.com (?)
+ * Wang Zhenyu at intel.com
+ * Dave Jiang at mvista.com
+ *
+ * $Id: bluesmoke_e752x.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $
+ *
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include <linux/slab.h>
+
+#include "edac_mc.h"
+
+
+#ifndef PCI_DEVICE_ID_INTEL_7520_0
+#define PCI_DEVICE_ID_INTEL_7520_0 0x3590
+#endif /* PCI_DEVICE_ID_INTEL_7520_0 */
+
+#ifndef PCI_DEVICE_ID_INTEL_7520_1_ERR
+#define PCI_DEVICE_ID_INTEL_7520_1_ERR 0x3591
+#endif /* PCI_DEVICE_ID_INTEL_7520_1_ERR */
+
+#ifndef PCI_DEVICE_ID_INTEL_7525_0
+#define PCI_DEVICE_ID_INTEL_7525_0 0x359E
+#endif /* PCI_DEVICE_ID_INTEL_7525_0 */
+
+#ifndef PCI_DEVICE_ID_INTEL_7525_1_ERR
+#define PCI_DEVICE_ID_INTEL_7525_1_ERR 0x3593
+#endif /* PCI_DEVICE_ID_INTEL_7525_1_ERR */
+
+#ifndef PCI_DEVICE_ID_INTEL_7320_0
+#define PCI_DEVICE_ID_INTEL_7320_0 0x3592
+#endif /* PCI_DEVICE_ID_INTEL_7320_0 */
+
+#ifndef PCI_DEVICE_ID_INTEL_7320_1_ERR
+#define PCI_DEVICE_ID_INTEL_7320_1_ERR 0x3593
+#endif /* PCI_DEVICE_ID_INTEL_7320_1_ERR */
+
+#define E752X_NR_CSROWS 8 /* number of csrows */
+
+
+/* E752X register addresses - device 0 function 0 */
+#define E752X_DRB 0x60 /* DRAM row boundary register (8b) */
+#define E752X_DRA 0x70 /* DRAM row attribute register (8b) */
+ /*
+ * 31:30 Device width row 7
+ * 01=x8 10=x4 11=x8 DDR2
+ * 27:26 Device width row 6
+ * 23:22 Device width row 5
+ * 19:20 Device width row 4
+ * 15:14 Device width row 3
+ * 11:10 Device width row 2
+ * 7:6 Device width row 1
+ * 3:2 Device width row 0
+ */
+#define E752X_DRC 0x7C /* DRAM controller mode reg (32b) */
+ /* FIXME:IS THIS RIGHT? */
+ /*
+ * 22 Number channels 0=1,1=2
+ * 19:18 DRB Granularity 32/64MB
+ */
+#define E752X_DRM 0x80 /* Dimm mapping register */
+#define E752X_DDRCSR 0x9A /* DDR control and status reg (16b) */
+ /*
+ * 14:12 1 single A, 2 single B, 3 dual
+ */
+#define E752X_TOLM 0xC4 /* DRAM top of low memory reg (16b) */
+#define E752X_REMAPBASE 0xC6 /* DRAM remap base address reg (16b) */
+#define E752X_REMAPLIMIT 0xC8 /* DRAM remap limit address reg (16b) */
+#define E752X_REMAPOFFSET 0xCA /* DRAM remap limit offset reg (16b) */
+
+/* E752X register addresses - device 0 function 1 */
+#define E752X_FERR_GLOBAL 0x40 /* Global first error register (32b) */
+#define E752X_NERR_GLOBAL 0x44 /* Global next error register (32b) */
+#define E752X_HI_FERR 0x50 /* Hub interface first error reg (8b) */
+#define E752X_HI_NERR 0x52 /* Hub interface next error reg (8b) */
+#define E752X_HI_ERRMASK 0x54 /* Hub interface error mask reg (8b) */
+#define E752X_HI_SMICMD 0x5A /* Hub interface SMI command reg (8b) */
+#define E752X_SYSBUS_FERR 0x60 /* System buss first error reg (16b) */
+#define E752X_SYSBUS_NERR 0x62 /* System buss next error reg (16b) */
+#define E752X_SYSBUS_ERRMASK 0x64 /* System buss error mask reg (16b) */
+#define E752X_SYSBUS_SMICMD 0x6A /* System buss SMI command reg (16b) */
+#define E752X_BUF_FERR 0x70 /* Memory buffer first error reg (8b) */
+#define E752X_BUF_NERR 0x72 /* Memory buffer next error reg (8b) */
+#define E752X_BUF_ERRMASK 0x74 /* Memory buffer error mask reg (8b) */
+#define E752X_BUF_SMICMD 0x7A /* Memory buffer SMI command reg (8b) */
+#define E752X_DRAM_FERR 0x80 /* DRAM first error register (16b) */
+#define E752X_DRAM_NERR 0x82 /* DRAM next error register (16b) */
+#define E752X_DRAM_ERRMASK 0x84 /* DRAM error mask register (8b) */
+#define E752X_DRAM_SMICMD 0x8A /* DRAM SMI command register (8b) */
+#define E752X_DRAM_RETR_ADD 0xAC /* DRAM Retry address register (32b) */
+#define E752X_DRAM_SEC1_ADD 0xA0 /* DRAM first correctable memory */
+ /* error address register (32b) */
+ /*
+ * 31 Reserved
+ * 30:2 CE address (64 byte block 34:6)
+ * 1 Reserved
+ * 0 HiLoCS
+ */
+#define E752X_DRAM_SEC2_ADD 0xC8 /* DRAM first correctable memory */
+ /* error address register (32b) */
+ /*
+ * 31 Reserved
+ * 30:2 CE address (64 byte block 34:6)
+ * 1 Reserved
+ * 0 HiLoCS
+ */
+#define E752X_DRAM_DED_ADD 0xA4 /* DRAM first uncorrectable memory */
+ /* error address register (32b) */
+ /*
+ * 31 Reserved
+ * 30:2 CE address (64 byte block 34:6)
+ * 1 Reserved
+ * 0 HiLoCS
+ */
+#define E752X_DRAM_SCRB_ADD 0xA8 /* DRAM first uncorrectable scrub memory */
+ /* error address register (32b) */
+ /*
+ * 31 Reserved
+ * 30:2 CE address (64 byte block 34:6)
+ * 1 Reserved
+ * 0 HiLoCS
+ */
+#define E752X_DRAM_SEC1_SYNDROME 0xC4 /* DRAM first correctable memory */
+ /* error syndrome register (16b) */
+#define E752X_DRAM_SEC2_SYNDROME 0xC6 /* DRAM second correctable memory */
+ /* error syndrome register (16b) */
+#define E752X_DEVPRES1 0xF4 /* Device Present 1 register (8b) */
+
+/* ICH5R register addresses - device 30 function 0 */
+#define ICH5R_PCI_STAT 0x06 /* PCI status register (16b) */
+#define ICH5R_PCI_2ND_STAT 0x1E /* PCI status secondary reg (16b) */
+#define ICH5R_PCI_BRIDGE_CTL 0x3E /* PCI bridge control register (16b) */
+
+enum e752x_chips {
+ E7520 = 0,
+ E7525 = 1,
+ E7320 = 2
+};
+
+
+struct e752x_pvt {
+ struct pci_dev *bridge_ck;
+ struct pci_dev *dev_d0f0;
+ struct pci_dev *dev_d0f1;
+ u32 tolm;
+ u32 remapbase;
+ u32 remaplimit;
+ int mc_symmetric;
+ u8 map[8];
+ int map_type;
+ const struct e752x_dev_info *dev_info;
+};
+
+
+struct e752x_dev_info {
+ u16 err_dev;
+ const char *ctl_name;
+};
+
+struct e752x_error_info {
+ u32 ferr_global;
+ u32 nerr_global;
+ u8 hi_ferr;
+ u8 hi_nerr;
+ u16 sysbus_ferr;
+ u16 sysbus_nerr;
+ u8 buf_ferr;
+ u8 buf_nerr;
+ u16 dram_ferr;
+ u16 dram_nerr;
+ u32 dram_sec1_add;
+ u32 dram_sec2_add;
+ u16 dram_sec1_syndrome;
+ u16 dram_sec2_syndrome;
+ u32 dram_ded_add;
+ u32 dram_scrb_add;
+ u32 dram_retr_add;
+};
+
+static const struct e752x_dev_info e752x_devs[] = {
+ [E7520] = {
+ .err_dev = PCI_DEVICE_ID_INTEL_7520_1_ERR,
+ .ctl_name = "E7520"},
+ [E7525] = {
+ .err_dev = PCI_DEVICE_ID_INTEL_7525_1_ERR,
+ .ctl_name = "E7525"},
+ [E7320] = {
+ .err_dev = PCI_DEVICE_ID_INTEL_7320_1_ERR,
+ .ctl_name = "E7320"},
+};
+
+
+static unsigned long ctl_page_to_phys(struct mem_ctl_info *mci,
+ unsigned long page)
+{
+ u32 remap;
+ struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info;
+
+ debugf3("MC: " __FILE__ ": %s()\n", __func__);
+
+ if (page < pvt->tolm)
+ return page;
+ if ((page >= 0x100000) && (page < pvt->remapbase))
+ return page;
+ remap = (page - pvt->tolm) + pvt->remapbase;
+ if (remap < pvt->remaplimit)
+ return remap;
+ printk(KERN_ERR "Invalid page %lx - out of range\n", page);
+ return pvt->tolm - 1;
+}
+
+static void do_process_ce(struct mem_ctl_info *mci, u16 error_one,
+ u32 sec1_add, u16 sec1_syndrome)
+{
+ u32 page;
+ int row;
+ int channel;
+ int i;
+ struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info;
+
+ debugf3("MC: " __FILE__ ": %s()\n", __func__);
+
+ /* convert the addr to 4k page */
+ page = sec1_add >> (PAGE_SHIFT - 4);
+
+ /* FIXME - check for -1 */
+ if (pvt->mc_symmetric) {
+ /* chip select are bits 14 & 13 */
+ row = ((page >> 1) & 3);
+ printk(KERN_WARNING
+ "Test row %d Table %d %d %d %d %d %d %d %d\n",
+ row, pvt->map[0], pvt->map[1], pvt->map[2],
+ pvt->map[3], pvt->map[4], pvt->map[5],
+ pvt->map[6], pvt->map[7]);
+
+ /* test for channel remapping */
+ for (i = 0; i < 8; i++) {
+ if (pvt->map[i] == row)
+ break;
+ }
+ printk(KERN_WARNING "Test computed row %d\n", i);
+ if (i < 8)
+ row = i;
+ else
+ printk(KERN_WARNING
+ "MC%d: row %d not found in remap table\n",
+ mci->mc_idx, row);
+ } else
+ row = edac_mc_find_csrow_by_page(mci, page);
+ /* 0 = channel A, 1 = channel B */
+ channel = !(error_one & 1);
+
+ if (!pvt->map_type)
+ row = 7 - row;
+ edac_mc_handle_ce(mci, page, 0, sec1_syndrome, row, channel,
+ "e752x CE");
+}
+
+
+static inline void process_ce(struct mem_ctl_info *mci, u16 error_one,
+ u32 sec1_add, u16 sec1_syndrome, int *error_found,
+ int handle_error)
+{
+ *error_found = 1;
+
+ if (handle_error)
+ do_process_ce(mci, error_one, sec1_add, sec1_syndrome);
+}
+
+static void do_process_ue(struct mem_ctl_info *mci, u16 error_one, u32 ded_add,
+ u32 scrb_add)
+{
+ u32 error_2b, block_page;
+ int row;
+ struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info;
+
+ debugf3("MC: " __FILE__ ": %s()\n", __func__);
+
+ if (error_one & 0x0202) {
+ error_2b = ded_add;
+ /* convert to 4k address */
+ block_page = error_2b >> (PAGE_SHIFT - 4);
+ row = pvt->mc_symmetric ?
+ /* chip select are bits 14 & 13 */
+ ((block_page >> 1) & 3) :
+ edac_mc_find_csrow_by_page(mci, block_page);
+ edac_mc_handle_ue(mci, block_page, 0, row,
+ "e752x UE from Read");
+ }
+ if (error_one & 0x0404) {
+ error_2b = scrb_add;
+ /* convert to 4k address */
+ block_page = error_2b >> (PAGE_SHIFT - 4);
+ row = pvt->mc_symmetric ?
+ /* chip select are bits 14 & 13 */
+ ((block_page >> 1) & 3) :
+ edac_mc_find_csrow_by_page(mci, block_page);
+ edac_mc_handle_ue(mci, block_page, 0, row,
+ "e752x UE from Scruber");
+ }
+}
+
+static inline void process_ue(struct mem_ctl_info *mci, u16 error_one,
+ u32 ded_add, u32 scrb_add, int *error_found, int handle_error)
+{
+ *error_found = 1;
+
+ if (handle_error)
+ do_process_ue(mci, error_one, ded_add, scrb_add);
+}
+
+static inline void process_ue_no_info_wr(struct mem_ctl_info *mci,
+ int *error_found, int handle_error)
+{
+ *error_found = 1;
+
+ if (!handle_error)
+ return;
+
+ debugf3("MC: " __FILE__ ": %s()\n", __func__);
+ edac_mc_handle_ue_no_info(mci, "e752x UE log memory write");
+}
+
+static void do_process_ded_retry(struct mem_ctl_info *mci, u16 error,
+ u32 retry_add)
+{
+ u32 error_1b, page;
+ int row;
+ struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info;
+
+ error_1b = retry_add;
+ page = error_1b >> (PAGE_SHIFT - 4); /* convert the addr to 4k page */
+ row = pvt->mc_symmetric ?
+ ((page >> 1) & 3) : /* chip select are bits 14 & 13 */
+ edac_mc_find_csrow_by_page(mci, page);
+ printk(KERN_WARNING
+ "MC%d: CE page 0x%lx, row %d : Memory read retry\n",
+ mci->mc_idx, (long unsigned int) page, row);
+}
+
+static inline void process_ded_retry(struct mem_ctl_info *mci, u16 error,
+ u32 retry_add, int *error_found, int handle_error)
+{
+ *error_found = 1;
+
+ if (handle_error)
+ do_process_ded_retry(mci, error, retry_add);
+}
+
+static inline void process_threshold_ce(struct mem_ctl_info *mci, u16 error,
+ int *error_found, int handle_error)
+{
+ *error_found = 1;
+
+ if (handle_error)
+ printk(KERN_WARNING "MC%d: Memory threshold CE\n",
+ mci->mc_idx);
+}
+
+char *global_message[11] = {
+ "PCI Express C1", "PCI Express C", "PCI Express B1",
+ "PCI Express B", "PCI Express A1", "PCI Express A",
+ "DMA Controler", "HUB Interface", "System Bus",
+ "DRAM Controler", "Internal Buffer"
+};
+
+char *fatal_message[2] = { "Non-Fatal ", "Fatal " };
+
+static void do_global_error(int fatal, u32 errors)
+{
+ int i;
+
+ for (i = 0; i < 11; i++) {
+ if (errors & (1 << i))
+ printk(KERN_WARNING "%sError %s\n",
+ fatal_message[fatal], global_message[i]);
+ }
+}
+
+static inline void global_error(int fatal, u32 errors, int *error_found,
+ int handle_error)
+{
+ *error_found = 1;
+
+ if (handle_error)
+ do_global_error(fatal, errors);
+}
+
+char *hub_message[7] = {
+ "HI Address or Command Parity", "HI Illegal Access",
+ "HI Internal Parity", "Out of Range Access",
+ "HI Data Parity", "Enhanced Config Access",
+ "Hub Interface Target Abort"
+};
+
+static void do_hub_error(int fatal, u8 errors)
+{
+ int i;
+
+ for (i = 0; i < 7; i++) {
+ if (errors & (1 << i))
+ printk(KERN_WARNING "%sError %s\n",
+ fatal_message[fatal], hub_message[i]);
+ }
+}
+
+static inline void hub_error(int fatal, u8 errors, int *error_found,
+ int handle_error)
+{
+ *error_found = 1;
+
+ if (handle_error)
+ do_hub_error(fatal, errors);
+}
+
+char *membuf_message[4] = {
+ "Internal PMWB to DRAM parity",
+ "Internal PMWB to System Bus Parity",
+ "Internal System Bus or IO to PMWB Parity",
+ "Internal DRAM to PMWB Parity"
+};
+
+static void do_membuf_error(u8 errors)
+{
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ if (errors & (1 << i))
+ printk(KERN_WARNING "Non-Fatal Error %s\n",
+ membuf_message[i]);
+ }
+}
+
+static inline void membuf_error(u8 errors, int *error_found, int handle_error)
+{
+ *error_found = 1;
+
+ if (handle_error)
+ do_membuf_error(errors);
+}
+
+char *sysbus_message[10] = {
+ "Addr or Request Parity",
+ "Data Strobe Glitch",
+ "Addr Strobe Glitch",
+ "Data Parity",
+ "Addr Above TOM",
+ "Non DRAM Lock Error",
+ "MCERR", "BINIT",
+ "Memory Parity",
+ "IO Subsystem Parity"
+};
+
+static void do_sysbus_error(int fatal, u32 errors)
+{
+ int i;
+
+ for (i = 0; i < 10; i++) {
+ if (errors & (1 << i))
+ printk(KERN_WARNING "%sError System Bus %s\n",
+ fatal_message[fatal], global_message[i]);
+ }
+}
+
+static inline void sysbus_error(int fatal, u32 errors, int *error_found,
+ int handle_error)
+{
+ *error_found = 1;
+
+ if (handle_error)
+ do_sysbus_error(fatal, errors);
+}
+
+static void e752x_check_hub_interface (struct e752x_error_info *info,
+ int *error_found, int handle_error)
+{
+ u8 stat8;
+
+ //pci_read_config_byte(dev,E752X_HI_FERR,&stat8);
+ stat8 = info->hi_ferr;
+ if(stat8 & 0x7f) { /* Error, so process */
+ stat8 &= 0x7f;
+ if(stat8 & 0x2b)
+ hub_error(1, stat8 & 0x2b, error_found, handle_error);
+ if(stat8 & 0x54)
+ hub_error(0, stat8 & 0x54, error_found, handle_error);
+ }
+ //pci_read_config_byte(dev,E752X_HI_NERR,&stat8);
+ stat8 = info->hi_nerr;
+ if(stat8 & 0x7f) { /* Error, so process */
+ stat8 &= 0x7f;
+ if (stat8 & 0x2b)
+ hub_error(1, stat8 & 0x2b, error_found, handle_error);
+ if(stat8 & 0x54)
+ hub_error(0, stat8 & 0x54, error_found, handle_error);
+ }
+}
+
+static void e752x_check_sysbus (struct e752x_error_info *info, int *error_found,
+ int handle_error)
+{
+ u32 stat32, error32;
+
+ //pci_read_config_dword(dev,E752X_SYSBUS_FERR,&stat32);
+ stat32 = info->sysbus_ferr + (info->sysbus_nerr << 16);
+
+ if (stat32 == 0)
+ return; /* no errors */
+
+ error32 = (stat32 >> 16) & 0x3ff;
+ stat32 = stat32 & 0x3ff;
+ if(stat32 & 0x083)
+ sysbus_error(1, stat32 & 0x083, error_found, handle_error);
+ if(stat32 & 0x37c)
+ sysbus_error(0, stat32 & 0x37c, error_found, handle_error);
+ if(error32 & 0x083)
+ sysbus_error(1, error32 & 0x083, error_found, handle_error);
+ if(error32 & 0x37c)
+ sysbus_error(0, error32 & 0x37c, error_found, handle_error);
+}
+
+static void e752x_check_membuf (struct e752x_error_info *info, int *error_found,
+ int handle_error)
+{
+ u8 stat8;
+
+ stat8 = info->buf_ferr;
+ if (stat8 & 0x0f) { /* Error, so process */
+ stat8 &= 0x0f;
+ membuf_error(stat8, error_found, handle_error);
+ }
+ stat8 = info->buf_nerr;
+ if (stat8 & 0x0f) { /* Error, so process */
+ stat8 &= 0x0f;
+ membuf_error(stat8, error_found, handle_error);
+ }
+}
+
+static void e752x_check_dram (struct mem_ctl_info *mci,
+ struct e752x_error_info *info, int *error_found, int handle_error)
+{
+ u16 error_one, error_next;
+
+ error_one = info->dram_ferr;
+ error_next = info->dram_nerr;
+
+ /* decode and report errors */
+ if(error_one & 0x0101) /* check first error correctable */
+ process_ce(mci, error_one, info->dram_sec1_add,
+ info->dram_sec1_syndrome, error_found,
+ handle_error);
+
+ if(error_next & 0x0101) /* check next error correctable */
+ process_ce(mci, error_next, info->dram_sec2_add,
+ info->dram_sec2_syndrome, error_found,
+ handle_error);
+
+ if(error_one & 0x4040)
+ process_ue_no_info_wr(mci, error_found, handle_error);
+
+ if(error_next & 0x4040)
+ process_ue_no_info_wr(mci, error_found, handle_error);
+
+ if(error_one & 0x2020)
+ process_ded_retry(mci, error_one, info->dram_retr_add,
+ error_found, handle_error);
+
+ if(error_next & 0x2020)
+ process_ded_retry(mci, error_next, info->dram_retr_add,
+ error_found, handle_error);
+
+ if(error_one & 0x0808)
+ process_threshold_ce(mci, error_one, error_found,
+ handle_error);
+
+ if(error_next & 0x0808)
+ process_threshold_ce(mci, error_next, error_found,
+ handle_error);
+
+ if(error_one & 0x0606)
+ process_ue(mci, error_one, info->dram_ded_add,
+ info->dram_scrb_add, error_found, handle_error);
+
+ if(error_next & 0x0606)
+ process_ue(mci, error_next, info->dram_ded_add,
+ info->dram_scrb_add, error_found, handle_error);
+}
+
+static void e752x_get_error_info (struct mem_ctl_info *mci,
+ struct e752x_error_info *info)
+{
+ struct pci_dev *dev;
+ struct e752x_pvt *pvt;
+
+ memset(info, 0, sizeof(*info));
+ pvt = (struct e752x_pvt *) mci->pvt_info;
+ dev = pvt->dev_d0f1;
+
+ pci_read_config_dword(dev, E752X_FERR_GLOBAL, &info->ferr_global);
+
+ if (info->ferr_global) {
+ pci_read_config_byte(dev, E752X_HI_FERR, &info->hi_ferr);
+ pci_read_config_word(dev, E752X_SYSBUS_FERR,
+ &info->sysbus_ferr);
+ pci_read_config_byte(dev, E752X_BUF_FERR, &info->buf_ferr);
+ pci_read_config_word(dev, E752X_DRAM_FERR,
+ &info->dram_ferr);
+ pci_read_config_dword(dev, E752X_DRAM_SEC1_ADD,
+ &info->dram_sec1_add);
+ pci_read_config_word(dev, E752X_DRAM_SEC1_SYNDROME,
+ &info->dram_sec1_syndrome);
+ pci_read_config_dword(dev, E752X_DRAM_DED_ADD,
+ &info->dram_ded_add);
+ pci_read_config_dword(dev, E752X_DRAM_SCRB_ADD,
+ &info->dram_scrb_add);
+ pci_read_config_dword(dev, E752X_DRAM_RETR_ADD,
+ &info->dram_retr_add);
+
+ if (info->hi_ferr & 0x7f)
+ pci_write_config_byte(dev, E752X_HI_FERR,
+ info->hi_ferr);
+
+ if (info->sysbus_ferr)
+ pci_write_config_word(dev, E752X_SYSBUS_FERR,
+ info->sysbus_ferr);
+
+ if (info->buf_ferr & 0x0f)
+ pci_write_config_byte(dev, E752X_BUF_FERR,
+ info->buf_ferr);
+
+ if (info->dram_ferr)
+ pci_write_bits16(pvt->bridge_ck, E752X_DRAM_FERR,
+ info->dram_ferr, info->dram_ferr);
+
+ pci_write_config_dword(dev, E752X_FERR_GLOBAL,
+ info->ferr_global);
+ }
+
+ pci_read_config_dword(dev, E752X_NERR_GLOBAL, &info->nerr_global);
+
+ if (info->nerr_global) {
+ pci_read_config_byte(dev, E752X_HI_NERR, &info->hi_nerr);
+ pci_read_config_word(dev, E752X_SYSBUS_NERR,
+ &info->sysbus_nerr);
+ pci_read_config_byte(dev, E752X_BUF_NERR, &info->buf_nerr);
+ pci_read_config_word(dev, E752X_DRAM_NERR,
+ &info->dram_nerr);
+ pci_read_config_dword(dev, E752X_DRAM_SEC2_ADD,
+ &info->dram_sec2_add);
+ pci_read_config_word(dev, E752X_DRAM_SEC2_SYNDROME,
+ &info->dram_sec2_syndrome);
+
+ if (info->hi_nerr & 0x7f)
+ pci_write_config_byte(dev, E752X_HI_NERR,
+ info->hi_nerr);
+
+ if (info->sysbus_nerr)
+ pci_write_config_word(dev, E752X_SYSBUS_NERR,
+ info->sysbus_nerr);
+
+ if (info->buf_nerr & 0x0f)
+ pci_write_config_byte(dev, E752X_BUF_NERR,
+ info->buf_nerr);
+
+ if (info->dram_nerr)
+ pci_write_bits16(pvt->bridge_ck, E752X_DRAM_NERR,
+ info->dram_nerr, info->dram_nerr);
+
+ pci_write_config_dword(dev, E752X_NERR_GLOBAL,
+ info->nerr_global);
+ }
+}
+
+static int e752x_process_error_info (struct mem_ctl_info *mci,
+ struct e752x_error_info *info, int handle_errors)
+{
+ u32 error32, stat32;
+ int error_found;
+
+ error_found = 0;
+ error32 = (info->ferr_global >> 18) & 0x3ff;
+ stat32 = (info->ferr_global >> 4) & 0x7ff;
+
+ if (error32)
+ global_error(1, error32, &error_found, handle_errors);
+
+ if (stat32)
+ global_error(0, stat32, &error_found, handle_errors);
+
+ error32 = (info->nerr_global >> 18) & 0x3ff;
+ stat32 = (info->nerr_global >> 4) & 0x7ff;
+
+ if (error32)
+ global_error(1, error32, &error_found, handle_errors);
+
+ if (stat32)
+ global_error(0, stat32, &error_found, handle_errors);
+
+ e752x_check_hub_interface(info, &error_found, handle_errors);
+ e752x_check_sysbus(info, &error_found, handle_errors);
+ e752x_check_membuf(info, &error_found, handle_errors);
+ e752x_check_dram(mci, info, &error_found, handle_errors);
+ return error_found;
+}
+
+static void e752x_check(struct mem_ctl_info *mci)
+{
+ struct e752x_error_info info;
+ debugf3("MC: " __FILE__ ": %s()\n", __func__);
+ e752x_get_error_info(mci, &info);
+ e752x_process_error_info(mci, &info, 1);
+}
+
+static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
+{
+ int rc = -ENODEV;
+ int index;
+ u16 pci_data, stat;
+ u32 stat32;
+ u16 stat16;
+ u8 stat8;
+ struct mem_ctl_info *mci = NULL;
+ struct e752x_pvt *pvt = NULL;
+ u16 ddrcsr;
+ u32 drc;
+ int drc_chan; /* Number of channels 0=1chan,1=2chan */
+ int drc_drbg; /* DRB granularity 0=64mb,1=128mb */
+ int drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */
+ u32 dra;
+ unsigned long last_cumul_size;
+ struct pci_dev *pres_dev;
+ struct pci_dev *dev = NULL;
+
+ debugf0("MC: " __FILE__ ": %s(): mci\n", __func__);
+ debugf0("Starting Probe1\n");
+
+ /* enable device 0 function 1 */
+ pci_read_config_byte(pdev, E752X_DEVPRES1, &stat8);
+ stat8 |= (1 << 5);
+ pci_write_config_byte(pdev, E752X_DEVPRES1, stat8);
+
+ /* need to find out the number of channels */
+ pci_read_config_dword(pdev, E752X_DRC, &drc);
+ pci_read_config_word(pdev, E752X_DDRCSR, &ddrcsr);
+ /* FIXME: should check >>12 or 0xf, true for all? */
+ /* Dual channel = 1, Single channel = 0 */
+ drc_chan = (((ddrcsr >> 12) & 3) == 3);
+ drc_drbg = drc_chan + 1; /* 128 in dual mode, 64 in single */
+ drc_ddim = (drc >> 20) & 0x3;
+
+ mci = edac_mc_alloc(sizeof(*pvt), E752X_NR_CSROWS, drc_chan + 1);
+
+ if (mci == NULL) {
+ rc = -ENOMEM;
+ goto fail;
+ }
+
+ debugf3("MC: " __FILE__ ": %s(): init mci\n", __func__);
+
+ mci->mtype_cap = MEM_FLAG_RDDR;
+ mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED |
+ EDAC_FLAG_S4ECD4ED;
+ /* FIXME - what if different memory types are in different csrows? */
+ mci->mod_name = BS_MOD_STR;
+ mci->mod_ver = "$Revision: 1.5.2.11 $";
+ mci->pdev = pdev;
+
+ debugf3("MC: " __FILE__ ": %s(): init pvt\n", __func__);
+ pvt = (struct e752x_pvt *) mci->pvt_info;
+ pvt->dev_info = &e752x_devs[dev_idx];
+ pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
+ pvt->dev_info->err_dev,
+ pvt->bridge_ck);
+ if (pvt->bridge_ck == NULL)
+ pvt->bridge_ck = pci_scan_single_device(pdev->bus,
+ PCI_DEVFN(0, 1));
+ if (pvt->bridge_ck == NULL) {
+ printk(KERN_ERR "MC: error reporting device not found:"
+ "vendor %x device 0x%x (broken BIOS?)\n",
+ PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].err_dev);
+ goto fail;
+ }
+ pvt->mc_symmetric = ((ddrcsr & 0x10) != 0);
+
+ debugf3("MC: " __FILE__ ": %s(): more mci init\n", __func__);
+ mci->ctl_name = pvt->dev_info->ctl_name;
+ mci->edac_check = e752x_check;
+ mci->ctl_page_to_phys = ctl_page_to_phys;
+
+ /* find out the device types */
+ pci_read_config_dword(pdev, E752X_DRA, &dra);
+
+ /*
+ * The dram row boundary (DRB) reg values are boundary address for
+ * each DRAM row with a granularity of 64 or 128MB (single/dual
+ * channel operation). DRB regs are cumulative; therefore DRB7 will
+ * contain the total memory contained in all eight rows.
+ */
+ for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
+ u8 value;
+ u32 cumul_size;
+ /* mem_dev 0=x8, 1=x4 */
+ int mem_dev = (dra >> (index * 4 + 2)) & 0x3;
+ struct csrow_info *csrow = &mci->csrows[index];
+
+ mem_dev = (mem_dev == 2);
+ pci_read_config_byte(mci->pdev, E752X_DRB + index, &value);
+ /* convert a 128 or 64 MiB DRB to a page size. */
+ cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
+ debugf3("MC: " __FILE__ ": %s(): (%d) cumul_size 0x%x\n",
+ __func__, index, cumul_size);
+ if (cumul_size == last_cumul_size)
+ continue; /* not populated */
+
+ csrow->first_page = last_cumul_size;
+ csrow->last_page = cumul_size - 1;
+ csrow->nr_pages = cumul_size - last_cumul_size;
+ last_cumul_size = cumul_size;
+ csrow->grain = 1 << 12; /* 4KiB - resolution of CELOG */
+ csrow->mtype = MEM_RDDR; /* only one type supported */
+ csrow->dtype = mem_dev ? DEV_X4 : DEV_X8;
+
+ /*
+ * if single channel or x8 devices then SECDED
+ * if dual channel and x4 then S4ECD4ED
+ */
+ if (drc_ddim) {
+ if (drc_chan && mem_dev) {
+ csrow->edac_mode = EDAC_S4ECD4ED;
+ mci->edac_cap |= EDAC_FLAG_S4ECD4ED;
+ } else {
+ csrow->edac_mode = EDAC_SECDED;
+ mci->edac_cap |= EDAC_FLAG_SECDED;
+ }
+ } else
+ csrow->edac_mode = EDAC_NONE;
+ }
+
+ /* Fill in the memory map table */
+ {
+ u8 value;
+ u8 last = 0;
+ u8 row = 0;
+ for (index = 0; index < 8; index += 2) {
+
+ pci_read_config_byte(mci->pdev, E752X_DRB + index,
+ &value);
+ /* test if there is a dimm in this slot */
+ if (value == last) {
+ /* no dimm in the slot, so flag it as empty */
+ pvt->map[index] = 0xff;
+ pvt->map[index + 1] = 0xff;
+ } else { /* there is a dimm in the slot */
+ pvt->map[index] = row;
+ row++;
+ last = value;
+ /* test the next value to see if the dimm is
+ double sided */
+ pci_read_config_byte(mci->pdev,
+ E752X_DRB + index + 1,
+ &value);
+ pvt->map[index + 1] = (value == last) ?
+ 0xff : /* the dimm is single sided,
+ so flag as empty */
+ row; /* this is a double sided dimm
+ to save the next row # */
+ row++;
+ last = value;
+ }
+ }
+ }
+
+ /* set the map type. 1 = normal, 0 = reversed */
+ pci_read_config_byte(mci->pdev, E752X_DRM, &stat8);
+ pvt->map_type = ((stat8 & 0x0f) > ((stat8 >> 4) & 0x0f));
+
+ mci->edac_cap |= EDAC_FLAG_NONE;
+
+ debugf3("MC: " __FILE__ ": %s(): tolm, remapbase, remaplimit\n",
+ __func__);
+ /* load the top of low memory, remap base, and remap limit vars */
+ pci_read_config_word(mci->pdev, E752X_TOLM, &pci_data);
+ pvt->tolm = ((u32) pci_data) << 4;
+ pci_read_config_word(mci->pdev, E752X_REMAPBASE, &pci_data);
+ pvt->remapbase = ((u32) pci_data) << 14;
+ pci_read_config_word(mci->pdev, E752X_REMAPLIMIT, &pci_data);
+ pvt->remaplimit = ((u32) pci_data) << 14;
+ printk("tolm = %x, remapbase = %x, remaplimit = %x\n", pvt->tolm,
+ pvt->remapbase, pvt->remaplimit);
+
+ if (edac_mc_add_mc(mci)) {
+ debugf3("MC: " __FILE__
+ ": %s(): failed edac_mc_add_mc()\n",
+ __func__);
+ goto fail;
+ }
+
+ /* Walk through the PCI table and clear errors */
+ switch (dev_idx) {
+ case E7520:
+ dev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_7520_0, NULL);
+ break;
+ case E7525:
+ dev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_7525_0, NULL);
+ break;
+ case E7320:
+ dev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_7320_0, NULL);
+ break;
+ }
+
+
+ pvt->dev_d0f0 = dev;
+ for (pres_dev = dev;
+ ((struct pci_dev *) pres_dev->global_list.next != dev);
+ pres_dev = (struct pci_dev *) pres_dev->global_list.next) {
+ pci_read_config_dword(pres_dev, PCI_COMMAND, &stat32);
+ stat = (u16) (stat32 >> 16);
+ /* clear any error bits */
+ if (stat32 & ((1 << 6) + (1 << 8)))
+ pci_write_config_word(pres_dev, PCI_STATUS, stat);
+ }
+ /* find the error reporting device and clear errors */
+ dev = pvt->dev_d0f1 = pci_dev_get(pvt->bridge_ck);
+ /* Turn off error disable & SMI in case the BIOS turned it on */
+ pci_write_config_byte(dev, E752X_HI_ERRMASK, 0x00);
+ pci_write_config_byte(dev, E752X_HI_SMICMD, 0x00);
+ pci_write_config_word(dev, E752X_SYSBUS_ERRMASK, 0x00);
+ pci_write_config_word(dev, E752X_SYSBUS_SMICMD, 0x00);
+ pci_write_config_byte(dev, E752X_BUF_ERRMASK, 0x00);
+ pci_write_config_byte(dev, E752X_BUF_SMICMD, 0x00);
+ pci_write_config_byte(dev, E752X_DRAM_ERRMASK, 0x00);
+ pci_write_config_byte(dev, E752X_DRAM_SMICMD, 0x00);
+ /* clear other MCH errors */
+ pci_read_config_dword(dev, E752X_FERR_GLOBAL, &stat32);
+ pci_write_config_dword(dev, E752X_FERR_GLOBAL, stat32);
+ pci_read_config_dword(dev, E752X_NERR_GLOBAL, &stat32);
+ pci_write_config_dword(dev, E752X_NERR_GLOBAL, stat32);
+ pci_read_config_byte(dev, E752X_HI_FERR, &stat8);
+ pci_write_config_byte(dev, E752X_HI_FERR, stat8);
+ pci_read_config_byte(dev, E752X_HI_NERR, &stat8);
+ pci_write_config_byte(dev, E752X_HI_NERR, stat8);
+ pci_read_config_dword(dev, E752X_SYSBUS_FERR, &stat32);
+ pci_write_config_dword(dev, E752X_SYSBUS_FERR, stat32);
+ pci_read_config_byte(dev, E752X_BUF_FERR, &stat8);
+ pci_write_config_byte(dev, E752X_BUF_FERR, stat8);
+ pci_read_config_byte(dev, E752X_BUF_NERR, &stat8);
+ pci_write_config_byte(dev, E752X_BUF_NERR, stat8);
+ pci_read_config_word(dev, E752X_DRAM_FERR, &stat16);
+ pci_write_config_word(dev, E752X_DRAM_FERR, stat16);
+ pci_read_config_word(dev, E752X_DRAM_NERR, &stat16);
+ pci_write_config_word(dev, E752X_DRAM_NERR, stat16);
+
+ /* get this far and it's successful */
+ debugf3("MC: " __FILE__ ": %s(): success\n", __func__);
+ return 0;
+
+fail:
+ if (mci) {
+ if (pvt->dev_d0f0)
+ pci_dev_put(pvt->dev_d0f0);
+ if (pvt->dev_d0f1)
+ pci_dev_put(pvt->dev_d0f1);
+ if (pvt->bridge_ck)
+ pci_dev_put(pvt->bridge_ck);
+ edac_mc_free(mci);
+ }
+ return rc;
+}
+
+/* returns count (>= 0), or negative on error */
+static int __devinit e752x_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ debugf0("MC: " __FILE__ ": %s()\n", __func__);
+
+ /* wake up and enable device */
+ if(pci_enable_device(pdev) < 0)
+ return -EIO;
+ return e752x_probe1(pdev, ent->driver_data);
+}
+
+
+static void __devexit e752x_remove_one(struct pci_dev *pdev)
+{
+ struct mem_ctl_info *mci;
+ struct e752x_pvt *pvt;
+
+ debugf0(__FILE__ ": %s()\n", __func__);
+
+ if ((mci = edac_mc_find_mci_by_pdev(pdev)) == NULL)
+ return;
+
+ if (edac_mc_del_mc(mci))
+ return;
+
+ pvt = (struct e752x_pvt *) mci->pvt_info;
+ pci_dev_put(pvt->dev_d0f0);
+ pci_dev_put(pvt->dev_d0f1);
+ pci_dev_put(pvt->bridge_ck);
+ edac_mc_free(mci);
+}
+
+
+static const struct pci_device_id e752x_pci_tbl[] __devinitdata = {
+ {PCI_VEND_DEV(INTEL, 7520_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ E7520},
+ {PCI_VEND_DEV(INTEL, 7525_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ E7525},
+ {PCI_VEND_DEV(INTEL, 7320_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ E7320},
+ {0,} /* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, e752x_pci_tbl);
+
+
+static struct pci_driver e752x_driver = {
+ name: BS_MOD_STR,
+ probe: e752x_init_one,
+ remove: __devexit_p(e752x_remove_one),
+ id_table: e752x_pci_tbl,
+};
+
+
+int __init e752x_init(void)
+{
+ int pci_rc;
+
+ debugf3("MC: " __FILE__ ": %s()\n", __func__);
+ pci_rc = pci_register_driver(&e752x_driver);
+ return (pci_rc < 0) ? pci_rc : 0;
+}
+
+
+static void __exit e752x_exit(void)
+{
+ debugf3("MC: " __FILE__ ": %s()\n", __func__);
+ pci_unregister_driver(&e752x_driver);
+}
+
+
+module_init(e752x_init);
+module_exit(e752x_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Linux Networx (http://lnxi.com) Tom Zimmerman\n");
+MODULE_DESCRIPTION("MC support for Intel e752x memory controllers");
diff --git a/drivers/edac/e7xxx_edac.c b/drivers/edac/e7xxx_edac.c
new file mode 100644
index 00000000000..066be43f5ec
--- /dev/null
+++ b/drivers/edac/e7xxx_edac.c
@@ -0,0 +1,558 @@
+/*
+ * Intel e7xxx Memory Controller kernel module
+ * (C) 2003 Linux Networx (http://lnxi.com)
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * See "enum e7xxx_chips" below for supported chipsets
+ *
+ * Written by Thayne Harbaugh
+ * Based on work by Dan Hollis <goemon at anime dot net> and others.
+ * http://www.anime.net/~goemon/linux-ecc/
+ *
+ * Contributors:
+ * Eric Biederman (Linux Networx)
+ * Tom Zimmerman (Linux Networx)
+ * Jim Garlick (Lawrence Livermore National Labs)
+ * Dave Peterson (Lawrence Livermore National Labs)
+ * That One Guy (Some other place)
+ * Wang Zhenyu (intel.com)
+ *
+ * $Id: edac_e7xxx.c,v 1.5.2.9 2005/10/05 00:43:44 dsp_llnl Exp $
+ *
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include "edac_mc.h"
+
+
+#ifndef PCI_DEVICE_ID_INTEL_7205_0
+#define PCI_DEVICE_ID_INTEL_7205_0 0x255d
+#endif /* PCI_DEVICE_ID_INTEL_7205_0 */
+
+#ifndef PCI_DEVICE_ID_INTEL_7205_1_ERR
+#define PCI_DEVICE_ID_INTEL_7205_1_ERR 0x2551
+#endif /* PCI_DEVICE_ID_INTEL_7205_1_ERR */
+
+#ifndef PCI_DEVICE_ID_INTEL_7500_0
+#define PCI_DEVICE_ID_INTEL_7500_0 0x2540
+#endif /* PCI_DEVICE_ID_INTEL_7500_0 */
+
+#ifndef PCI_DEVICE_ID_INTEL_7500_1_ERR
+#define PCI_DEVICE_ID_INTEL_7500_1_ERR 0x2541
+#endif /* PCI_DEVICE_ID_INTEL_7500_1_ERR */
+
+#ifndef PCI_DEVICE_ID_INTEL_7501_0
+#define PCI_DEVICE_ID_INTEL_7501_0 0x254c
+#endif /* PCI_DEVICE_ID_INTEL_7501_0 */
+
+#ifndef PCI_DEVICE_ID_INTEL_7501_1_ERR
+#define PCI_DEVICE_ID_INTEL_7501_1_ERR 0x2541
+#endif /* PCI_DEVICE_ID_INTEL_7501_1_ERR */
+
+#ifndef PCI_DEVICE_ID_INTEL_7505_0
+#define PCI_DEVICE_ID_INTEL_7505_0 0x2550
+#endif /* PCI_DEVICE_ID_INTEL_7505_0 */
+
+#ifndef PCI_DEVICE_ID_INTEL_7505_1_ERR
+#define PCI_DEVICE_ID_INTEL_7505_1_ERR 0x2551
+#endif /* PCI_DEVICE_ID_INTEL_7505_1_ERR */
+
+
+#define E7XXX_NR_CSROWS 8 /* number of csrows */
+#define E7XXX_NR_DIMMS 8 /* FIXME - is this correct? */
+
+
+/* E7XXX register addresses - device 0 function 0 */
+#define E7XXX_DRB 0x60 /* DRAM row boundary register (8b) */
+#define E7XXX_DRA 0x70 /* DRAM row attribute register (8b) */
+ /*
+ * 31 Device width row 7 0=x8 1=x4
+ * 27 Device width row 6
+ * 23 Device width row 5
+ * 19 Device width row 4
+ * 15 Device width row 3
+ * 11 Device width row 2
+ * 7 Device width row 1
+ * 3 Device width row 0
+ */
+#define E7XXX_DRC 0x7C /* DRAM controller mode reg (32b) */
+ /*
+ * 22 Number channels 0=1,1=2
+ * 19:18 DRB Granularity 32/64MB
+ */
+#define E7XXX_TOLM 0xC4 /* DRAM top of low memory reg (16b) */
+#define E7XXX_REMAPBASE 0xC6 /* DRAM remap base address reg (16b) */
+#define E7XXX_REMAPLIMIT 0xC8 /* DRAM remap limit address reg (16b) */
+
+/* E7XXX register addresses - device 0 function 1 */
+#define E7XXX_DRAM_FERR 0x80 /* DRAM first error register (8b) */
+#define E7XXX_DRAM_NERR 0x82 /* DRAM next error register (8b) */
+#define E7XXX_DRAM_CELOG_ADD 0xA0 /* DRAM first correctable memory */
+ /* error address register (32b) */
+ /*
+ * 31:28 Reserved
+ * 27:6 CE address (4k block 33:12)
+ * 5:0 Reserved
+ */
+#define E7XXX_DRAM_UELOG_ADD 0xB0 /* DRAM first uncorrectable memory */
+ /* error address register (32b) */
+ /*
+ * 31:28 Reserved
+ * 27:6 CE address (4k block 33:12)
+ * 5:0 Reserved
+ */
+#define E7XXX_DRAM_CELOG_SYNDROME 0xD0 /* DRAM first correctable memory */
+ /* error syndrome register (16b) */
+
+enum e7xxx_chips {
+ E7500 = 0,
+ E7501,
+ E7505,
+ E7205,
+};
+
+
+struct e7xxx_pvt {
+ struct pci_dev *bridge_ck;
+ u32 tolm;
+ u32 remapbase;
+ u32 remaplimit;
+ const struct e7xxx_dev_info *dev_info;
+};
+
+
+struct e7xxx_dev_info {
+ u16 err_dev;
+ const char *ctl_name;
+};
+
+
+struct e7xxx_error_info {
+ u8 dram_ferr;
+ u8 dram_nerr;
+ u32 dram_celog_add;
+ u16 dram_celog_syndrome;
+ u32 dram_uelog_add;
+};
+
+static const struct e7xxx_dev_info e7xxx_devs[] = {
+ [E7500] = {
+ .err_dev = PCI_DEVICE_ID_INTEL_7500_1_ERR,
+ .ctl_name = "E7500"},
+ [E7501] = {
+ .err_dev = PCI_DEVICE_ID_INTEL_7501_1_ERR,
+ .ctl_name = "E7501"},
+ [E7505] = {
+ .err_dev = PCI_DEVICE_ID_INTEL_7505_1_ERR,
+ .ctl_name = "E7505"},
+ [E7205] = {
+ .err_dev = PCI_DEVICE_ID_INTEL_7205_1_ERR,
+ .ctl_name = "E7205"},
+};
+
+
+/* FIXME - is this valid for both SECDED and S4ECD4ED? */
+static inline int e7xxx_find_channel(u16 syndrome)
+{
+ debugf3("MC: " __FILE__ ": %s()\n", __func__);
+
+ if ((syndrome & 0xff00) == 0)
+ return 0;
+ if ((syndrome & 0x00ff) == 0)
+ return 1;
+ if ((syndrome & 0xf000) == 0 || (syndrome & 0x0f00) == 0)
+ return 0;
+ return 1;
+}
+
+
+static unsigned long
+ctl_page_to_phys(struct mem_ctl_info *mci, unsigned long page)
+{
+ u32 remap;
+ struct e7xxx_pvt *pvt = (struct e7xxx_pvt *) mci->pvt_info;
+
+ debugf3("MC: " __FILE__ ": %s()\n", __func__);
+
+ if ((page < pvt->tolm) ||
+ ((page >= 0x100000) && (page < pvt->remapbase)))
+ return page;
+ remap = (page - pvt->tolm) + pvt->remapbase;
+ if (remap < pvt->remaplimit)
+ return remap;
+ printk(KERN_ERR "Invalid page %lx - out of range\n", page);
+ return pvt->tolm - 1;
+}
+
+
+static void process_ce(struct mem_ctl_info *mci, struct e7xxx_error_info *info)
+{
+ u32 error_1b, page;
+ u16 syndrome;
+ int row;
+ int channel;
+
+ debugf3("MC: " __FILE__ ": %s()\n", __func__);
+
+ /* read the error address */
+ error_1b = info->dram_celog_add;
+ /* FIXME - should use PAGE_SHIFT */
+ page = error_1b >> 6; /* convert the address to 4k page */
+ /* read the syndrome */
+ syndrome = info->dram_celog_syndrome;
+ /* FIXME - check for -1 */
+ row = edac_mc_find_csrow_by_page(mci, page);
+ /* convert syndrome to channel */
+ channel = e7xxx_find_channel(syndrome);
+ edac_mc_handle_ce(mci, page, 0, syndrome, row, channel,
+ "e7xxx CE");
+}
+
+
+static void process_ce_no_info(struct mem_ctl_info *mci)
+{
+ debugf3("MC: " __FILE__ ": %s()\n", __func__);
+ edac_mc_handle_ce_no_info(mci, "e7xxx CE log register overflow");
+}
+
+
+static void process_ue(struct mem_ctl_info *mci, struct e7xxx_error_info *info)
+{
+ u32 error_2b, block_page;
+ int row;
+
+ debugf3("MC: " __FILE__ ": %s()\n", __func__);
+
+ /* read the error address */
+ error_2b = info->dram_uelog_add;
+ /* FIXME - should use PAGE_SHIFT */
+ block_page = error_2b >> 6; /* convert to 4k address */
+ row = edac_mc_find_csrow_by_page(mci, block_page);
+ edac_mc_handle_ue(mci, block_page, 0, row, "e7xxx UE");
+}
+
+
+static void process_ue_no_info(struct mem_ctl_info *mci)
+{
+ debugf3("MC: " __FILE__ ": %s()\n", __func__);
+ edac_mc_handle_ue_no_info(mci, "e7xxx UE log register overflow");
+}
+
+
+static void e7xxx_get_error_info (struct mem_ctl_info *mci,
+ struct e7xxx_error_info *info)
+{
+ struct e7xxx_pvt *pvt;
+
+ pvt = (struct e7xxx_pvt *) mci->pvt_info;
+ pci_read_config_byte(pvt->bridge_ck, E7XXX_DRAM_FERR,
+ &info->dram_ferr);
+ pci_read_config_byte(pvt->bridge_ck, E7XXX_DRAM_NERR,
+ &info->dram_nerr);
+
+ if ((info->dram_ferr & 1) || (info->dram_nerr & 1)) {
+ pci_read_config_dword(pvt->bridge_ck, E7XXX_DRAM_CELOG_ADD,
+ &info->dram_celog_add);
+ pci_read_config_word(pvt->bridge_ck,
+ E7XXX_DRAM_CELOG_SYNDROME, &info->dram_celog_syndrome);
+ }
+
+ if ((info->dram_ferr & 2) || (info->dram_nerr & 2))
+ pci_read_config_dword(pvt->bridge_ck, E7XXX_DRAM_UELOG_ADD,
+ &info->dram_uelog_add);
+
+ if (info->dram_ferr & 3)
+ pci_write_bits8(pvt->bridge_ck, E7XXX_DRAM_FERR, 0x03,
+ 0x03);
+
+ if (info->dram_nerr & 3)
+ pci_write_bits8(pvt->bridge_ck, E7XXX_DRAM_NERR, 0x03,
+ 0x03);
+}
+
+
+static int e7xxx_process_error_info (struct mem_ctl_info *mci,
+ struct e7xxx_error_info *info, int handle_errors)
+{
+ int error_found;
+
+ error_found = 0;
+
+ /* decode and report errors */
+ if (info->dram_ferr & 1) { /* check first error correctable */
+ error_found = 1;
+
+ if (handle_errors)
+ process_ce(mci, info);
+ }
+
+ if (info->dram_ferr & 2) { /* check first error uncorrectable */
+ error_found = 1;
+
+ if (handle_errors)
+ process_ue(mci, info);
+ }
+
+ if (info->dram_nerr & 1) { /* check next error correctable */
+ error_found = 1;
+
+ if (handle_errors) {
+ if (info->dram_ferr & 1)
+ process_ce_no_info(mci);
+ else
+ process_ce(mci, info);
+ }
+ }
+
+ if (info->dram_nerr & 2) { /* check next error uncorrectable */
+ error_found = 1;
+
+ if (handle_errors) {
+ if (info->dram_ferr & 2)
+ process_ue_no_info(mci);
+ else
+ process_ue(mci, info);
+ }
+ }
+
+ return error_found;
+}
+
+
+static void e7xxx_check(struct mem_ctl_info *mci)
+{
+ struct e7xxx_error_info info;
+
+ debugf3("MC: " __FILE__ ": %s()\n", __func__);
+ e7xxx_get_error_info(mci, &info);
+ e7xxx_process_error_info(mci, &info, 1);
+}
+
+
+static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx)
+{
+ int rc = -ENODEV;
+ int index;
+ u16 pci_data;
+ struct mem_ctl_info *mci = NULL;
+ struct e7xxx_pvt *pvt = NULL;
+ u32 drc;
+ int drc_chan = 1; /* Number of channels 0=1chan,1=2chan */
+ int drc_drbg = 1; /* DRB granularity 0=32mb,1=64mb */
+ int drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */
+ u32 dra;
+ unsigned long last_cumul_size;
+
+
+ debugf0("MC: " __FILE__ ": %s(): mci\n", __func__);
+
+ /* need to find out the number of channels */
+ pci_read_config_dword(pdev, E7XXX_DRC, &drc);
+ /* only e7501 can be single channel */
+ if (dev_idx == E7501) {
+ drc_chan = ((drc >> 22) & 0x1);
+ drc_drbg = (drc >> 18) & 0x3;
+ }
+ drc_ddim = (drc >> 20) & 0x3;
+
+ mci = edac_mc_alloc(sizeof(*pvt), E7XXX_NR_CSROWS, drc_chan + 1);
+
+ if (mci == NULL) {
+ rc = -ENOMEM;
+ goto fail;
+ }
+
+ debugf3("MC: " __FILE__ ": %s(): init mci\n", __func__);
+
+ mci->mtype_cap = MEM_FLAG_RDDR;
+ mci->edac_ctl_cap =
+ EDAC_FLAG_NONE | EDAC_FLAG_SECDED | EDAC_FLAG_S4ECD4ED;
+ /* FIXME - what if different memory types are in different csrows? */
+ mci->mod_name = BS_MOD_STR;
+ mci->mod_ver = "$Revision: 1.5.2.9 $";
+ mci->pdev = pdev;
+
+ debugf3("MC: " __FILE__ ": %s(): init pvt\n", __func__);
+ pvt = (struct e7xxx_pvt *) mci->pvt_info;
+ pvt->dev_info = &e7xxx_devs[dev_idx];
+ pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
+ pvt->dev_info->err_dev,
+ pvt->bridge_ck);
+ if (!pvt->bridge_ck) {
+ printk(KERN_ERR
+ "MC: error reporting device not found:"
+ "vendor %x device 0x%x (broken BIOS?)\n",
+ PCI_VENDOR_ID_INTEL, e7xxx_devs[dev_idx].err_dev);
+ goto fail;
+ }
+
+ debugf3("MC: " __FILE__ ": %s(): more mci init\n", __func__);
+ mci->ctl_name = pvt->dev_info->ctl_name;
+
+ mci->edac_check = e7xxx_check;
+ mci->ctl_page_to_phys = ctl_page_to_phys;
+
+ /* find out the device types */
+ pci_read_config_dword(pdev, E7XXX_DRA, &dra);
+
+ /*
+ * The dram row boundary (DRB) reg values are boundary address
+ * for each DRAM row with a granularity of 32 or 64MB (single/dual
+ * channel operation). DRB regs are cumulative; therefore DRB7 will
+ * contain the total memory contained in all eight rows.
+ */
+ for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
+ u8 value;
+ u32 cumul_size;
+ /* mem_dev 0=x8, 1=x4 */
+ int mem_dev = (dra >> (index * 4 + 3)) & 0x1;
+ struct csrow_info *csrow = &mci->csrows[index];
+
+ pci_read_config_byte(mci->pdev, E7XXX_DRB + index, &value);
+ /* convert a 64 or 32 MiB DRB to a page size. */
+ cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
+ debugf3("MC: " __FILE__ ": %s(): (%d) cumul_size 0x%x\n",
+ __func__, index, cumul_size);
+ if (cumul_size == last_cumul_size)
+ continue; /* not populated */
+
+ csrow->first_page = last_cumul_size;
+ csrow->last_page = cumul_size - 1;
+ csrow->nr_pages = cumul_size - last_cumul_size;
+ last_cumul_size = cumul_size;
+ csrow->grain = 1 << 12; /* 4KiB - resolution of CELOG */
+ csrow->mtype = MEM_RDDR; /* only one type supported */
+ csrow->dtype = mem_dev ? DEV_X4 : DEV_X8;
+
+ /*
+ * if single channel or x8 devices then SECDED
+ * if dual channel and x4 then S4ECD4ED
+ */
+ if (drc_ddim) {
+ if (drc_chan && mem_dev) {
+ csrow->edac_mode = EDAC_S4ECD4ED;
+ mci->edac_cap |= EDAC_FLAG_S4ECD4ED;
+ } else {
+ csrow->edac_mode = EDAC_SECDED;
+ mci->edac_cap |= EDAC_FLAG_SECDED;
+ }
+ } else
+ csrow->edac_mode = EDAC_NONE;
+ }
+
+ mci->edac_cap |= EDAC_FLAG_NONE;
+
+ debugf3("MC: " __FILE__ ": %s(): tolm, remapbase, remaplimit\n",
+ __func__);
+ /* load the top of low memory, remap base, and remap limit vars */
+ pci_read_config_word(mci->pdev, E7XXX_TOLM, &pci_data);
+ pvt->tolm = ((u32) pci_data) << 4;
+ pci_read_config_word(mci->pdev, E7XXX_REMAPBASE, &pci_data);
+ pvt->remapbase = ((u32) pci_data) << 14;
+ pci_read_config_word(mci->pdev, E7XXX_REMAPLIMIT, &pci_data);
+ pvt->remaplimit = ((u32) pci_data) << 14;
+ printk("tolm = %x, remapbase = %x, remaplimit = %x\n", pvt->tolm,
+ pvt->remapbase, pvt->remaplimit);
+
+ /* clear any pending errors, or initial state bits */
+ pci_write_bits8(pvt->bridge_ck, E7XXX_DRAM_FERR, 0x03, 0x03);
+ pci_write_bits8(pvt->bridge_ck, E7XXX_DRAM_NERR, 0x03, 0x03);
+
+ if (edac_mc_add_mc(mci) != 0) {
+ debugf3("MC: " __FILE__
+ ": %s(): failed edac_mc_add_mc()\n",
+ __func__);
+ goto fail;
+ }
+
+ /* get this far and it's successful */
+ debugf3("MC: " __FILE__ ": %s(): success\n", __func__);
+ return 0;
+
+fail:
+ if (mci != NULL) {
+ if(pvt != NULL && pvt->bridge_ck)
+ pci_dev_put(pvt->bridge_ck);
+ edac_mc_free(mci);
+ }
+
+ return rc;
+}
+
+/* returns count (>= 0), or negative on error */
+static int __devinit
+e7xxx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ debugf0("MC: " __FILE__ ": %s()\n", __func__);
+
+ /* wake up and enable device */
+ return pci_enable_device(pdev) ?
+ -EIO : e7xxx_probe1(pdev, ent->driver_data);
+}
+
+
+static void __devexit e7xxx_remove_one(struct pci_dev *pdev)
+{
+ struct mem_ctl_info *mci;
+ struct e7xxx_pvt *pvt;
+
+ debugf0(__FILE__ ": %s()\n", __func__);
+
+ if (((mci = edac_mc_find_mci_by_pdev(pdev)) != 0) &&
+ edac_mc_del_mc(mci)) {
+ pvt = (struct e7xxx_pvt *) mci->pvt_info;
+ pci_dev_put(pvt->bridge_ck);
+ edac_mc_free(mci);
+ }
+}
+
+
+static const struct pci_device_id e7xxx_pci_tbl[] __devinitdata = {
+ {PCI_VEND_DEV(INTEL, 7205_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ E7205},
+ {PCI_VEND_DEV(INTEL, 7500_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ E7500},
+ {PCI_VEND_DEV(INTEL, 7501_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ E7501},
+ {PCI_VEND_DEV(INTEL, 7505_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ E7505},
+ {0,} /* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, e7xxx_pci_tbl);
+
+
+static struct pci_driver e7xxx_driver = {
+ .name = BS_MOD_STR,
+ .probe = e7xxx_init_one,
+ .remove = __devexit_p(e7xxx_remove_one),
+ .id_table = e7xxx_pci_tbl,
+};
+
+
+int __init e7xxx_init(void)
+{
+ return pci_register_driver(&e7xxx_driver);
+}
+
+
+static void __exit e7xxx_exit(void)
+{
+ pci_unregister_driver(&e7xxx_driver);
+}
+
+module_init(e7xxx_init);
+module_exit(e7xxx_exit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh et al\n"
+ "Based on.work by Dan Hollis et al");
+MODULE_DESCRIPTION("MC support for Intel e7xxx memory controllers");