diff options
| -rw-r--r-- | drivers/usb/host/xhci-hcd.c | 77 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-pci.c | 13 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-ring.c | 61 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.h | 20 |
4 files changed, 148 insertions, 23 deletions
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index 4353c1c7893..1d4a1e3f953 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -224,7 +224,7 @@ int xhci_init(struct usb_hcd *hcd) xhci_dbg(xhci, "QUIRK: Not clearing Link TRB chain bits.\n"); xhci->quirks |= XHCI_LINK_TRB_QUIRK; } else { - xhci_dbg(xhci, "xHCI has no QUIRKS\n"); + xhci_dbg(xhci, "xHCI doesn't need link TRB QUIRK\n"); } retval = xhci_mem_init(xhci, GFP_KERNEL); xhci_dbg(xhci, "Finished xhci_init\n"); @@ -567,13 +567,22 @@ unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc) return 1 << (xhci_get_endpoint_index(desc) + 1); } +/* Find the flag for this endpoint (for use in the control context). Use the + * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is + * bit 1, etc. + */ +unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index) +{ + return 1 << (ep_index + 1); +} + /* Compute the last valid endpoint context index. Basically, this is the * endpoint index plus one. For slot contexts with more than valid endpoint, * we find the most significant bit set in the added contexts flags. * e.g. ep 1 IN (with epnum 0x81) => added_ctxs = 0b1000 * fls(0b1000) = 4, but the endpoint context index is 3, so subtract one. */ -static inline unsigned int xhci_last_valid_endpoint(u32 added_ctxs) +unsigned int xhci_last_valid_endpoint(u32 added_ctxs) { return fls(added_ctxs) - 1; } @@ -1230,8 +1239,44 @@ void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) xhci_zero_in_ctx(xhci, virt_dev); } +void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci, + unsigned int slot_id, unsigned int ep_index, + struct xhci_dequeue_state *deq_state) +{ + struct xhci_container_ctx *in_ctx; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_ep_ctx *ep_ctx; + u32 added_ctxs; + dma_addr_t addr; + + xhci_endpoint_copy(xhci, xhci->devs[slot_id], ep_index); + in_ctx = xhci->devs[slot_id]->in_ctx; + ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index); + addr = xhci_trb_virt_to_dma(deq_state->new_deq_seg, + deq_state->new_deq_ptr); + if (addr == 0) { + xhci_warn(xhci, "WARN Cannot submit config ep after " + "reset ep command\n"); + xhci_warn(xhci, "WARN deq seg = %p, deq ptr = %p\n", + deq_state->new_deq_seg, + deq_state->new_deq_ptr); + return; + } + ep_ctx->deq = addr | deq_state->new_cycle_state; + + xhci_slot_copy(xhci, xhci->devs[slot_id]); + + ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + added_ctxs = xhci_get_endpoint_flag_from_index(ep_index); + ctrl_ctx->add_flags = added_ctxs | SLOT_FLAG; + ctrl_ctx->drop_flags = added_ctxs; + + xhci_dbg(xhci, "Slot ID %d Input Context:\n", slot_id); + xhci_dbg_ctx(xhci, in_ctx, ep_index); +} + void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, - struct usb_device *udev, struct usb_host_endpoint *ep, + struct usb_device *udev, unsigned int ep_index, struct xhci_ring *ep_ring) { struct xhci_dequeue_state deq_state; @@ -1241,12 +1286,26 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, * or it will attempt to resend it on the next doorbell ring. */ xhci_find_new_dequeue_state(xhci, udev->slot_id, - ep_index, ep_ring->stopped_td, &deq_state); + ep_index, ep_ring->stopped_td, + &deq_state); - xhci_dbg(xhci, "Queueing new dequeue state\n"); - xhci_queue_new_dequeue_state(xhci, ep_ring, - udev->slot_id, - ep_index, &deq_state); + /* HW with the reset endpoint quirk will use the saved dequeue state to + * issue a configure endpoint command later. + */ + if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) { + xhci_dbg(xhci, "Queueing new dequeue state\n"); + xhci_queue_new_dequeue_state(xhci, ep_ring, + udev->slot_id, + ep_index, &deq_state); + } else { + /* Better hope no one uses the input context between now and the + * reset endpoint completion! + */ + xhci_dbg(xhci, "Setting up input context for " + "configure endpoint command\n"); + xhci_setup_input_ctx_for_quirk(xhci, udev->slot_id, + ep_index, &deq_state); + } } /* Deal with stalled endpoints. The core should have sent the control message @@ -1293,7 +1352,7 @@ void xhci_endpoint_reset(struct usb_hcd *hcd, * command. Better hope that last command worked! */ if (!ret) { - xhci_cleanup_stalled_ring(xhci, udev, ep, ep_index, ep_ring); + xhci_cleanup_stalled_ring(xhci, udev, ep_index, ep_ring); kfree(ep_ring->stopped_td); xhci_ring_cmd_db(xhci); } diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 592fe7e623f..8fb308d43bc 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -24,6 +24,10 @@ #include "xhci.h" +/* Device for a quirk */ +#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 +#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 + static const char hcd_name[] = "xhci_hcd"; /* called after powerup, by probe or system-pm "wakeup" */ @@ -62,6 +66,15 @@ static int xhci_pci_setup(struct usb_hcd *hcd) xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params); xhci_print_registers(xhci); + /* Look for vendor-specific quirks */ + if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && + pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && + pdev->revision == 0x0) { + xhci->quirks |= XHCI_RESET_EP_QUIRK; + xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure" + " endpoint cmd after reset endpoint\n"); + } + /* Make sure the HC is halted. */ retval = xhci_halt(xhci); if (retval) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index c831194b096..35374ddc31c 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -469,7 +469,6 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, * ring running. */ ep_ring->state |= SET_DEQ_PENDING; - xhci_ring_cmd_db(xhci); } /* @@ -538,6 +537,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, if (deq_state.new_deq_ptr && deq_state.new_deq_seg) { xhci_queue_new_dequeue_state(xhci, ep_ring, slot_id, ep_index, &deq_state); + xhci_ring_cmd_db(xhci); } else { /* Otherwise just ring the doorbell to restart the ring */ ring_ep_doorbell(xhci, slot_id, ep_index); @@ -651,18 +651,31 @@ static void handle_reset_ep_completion(struct xhci_hcd *xhci, { int slot_id; unsigned int ep_index; + struct xhci_ring *ep_ring; slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]); ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]); + ep_ring = xhci->devs[slot_id]->ep_rings[ep_index]; /* This command will only fail if the endpoint wasn't halted, * but we don't care. */ xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n", (unsigned int) GET_COMP_CODE(event->status)); - /* Clear our internal halted state and restart the ring */ - xhci->devs[slot_id]->ep_rings[ep_index]->state &= ~EP_HALTED; - ring_ep_doorbell(xhci, slot_id, ep_index); + /* HW with the reset endpoint quirk needs to have a configure endpoint + * command complete before the endpoint can be used. Queue that here + * because the HW can't handle two commands being queued in a row. + */ + if (xhci->quirks & XHCI_RESET_EP_QUIRK) { + xhci_dbg(xhci, "Queueing configure endpoint command\n"); + xhci_queue_configure_endpoint(xhci, + xhci->devs[slot_id]->in_ctx->dma, slot_id); + xhci_ring_cmd_db(xhci); + } else { + /* Clear our internal halted state and restart the ring */ + ep_ring->state &= ~EP_HALTED; + ring_ep_doorbell(xhci, slot_id, ep_index); + } } static void handle_cmd_completion(struct xhci_hcd *xhci, @@ -671,6 +684,10 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, int slot_id = TRB_TO_SLOT_ID(event->flags); u64 cmd_dma; dma_addr_t cmd_dequeue_dma; + struct xhci_input_control_ctx *ctrl_ctx; + unsigned int ep_index; + struct xhci_ring *ep_ring; + unsigned int ep_state; cmd_dma = event->cmd_trb; cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, @@ -698,8 +715,39 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, xhci_free_virt_device(xhci, slot_id); break; case TRB_TYPE(TRB_CONFIG_EP): - xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status); - complete(&xhci->devs[slot_id]->cmd_completion); + /* + * Configure endpoint commands can come from the USB core + * configuration or alt setting changes, or because the HW + * needed an extra configure endpoint command after a reset + * endpoint command. In the latter case, the xHCI driver is + * not waiting on the configure endpoint command. + */ + ctrl_ctx = xhci_get_input_control_ctx(xhci, + xhci->devs[slot_id]->in_ctx); + /* Input ctx add_flags are the endpoint index plus one */ + ep_index = xhci_last_valid_endpoint(ctrl_ctx->add_flags) - 1; + ep_ring = xhci->devs[slot_id]->ep_rings[ep_index]; + if (!ep_ring) { + /* This must have been an initial configure endpoint */ + xhci->devs[slot_id]->cmd_status = + GET_COMP_CODE(event->status); + complete(&xhci->devs[slot_id]->cmd_completion); + break; + } + ep_state = ep_ring->state; + xhci_dbg(xhci, "Completed config ep cmd - last ep index = %d, " + "state = %d\n", ep_index, ep_state); + if (xhci->quirks & XHCI_RESET_EP_QUIRK && + ep_state & EP_HALTED) { + /* Clear our internal halted state and restart ring */ + xhci->devs[slot_id]->ep_rings[ep_index]->state &= + ~EP_HALTED; + ring_ep_doorbell(xhci, slot_id, ep_index); + } else { + xhci->devs[slot_id]->cmd_status = + GET_COMP_CODE(event->status); + complete(&xhci->devs[slot_id]->cmd_completion); + } break; case TRB_TYPE(TRB_EVAL_CONTEXT): xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status); @@ -958,7 +1006,6 @@ static int handle_tx_event(struct xhci_hcd *xhci, xhci_queue_reset_ep(xhci, slot_id, ep_index); xhci_cleanup_stalled_ring(xhci, td->urb->dev, - td->urb->ep, ep_index, ep_ring); xhci_ring_cmd_db(xhci); goto td_cleanup; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index b1abaeb62b4..bc64b500feb 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -929,6 +929,12 @@ struct xhci_td { union xhci_trb *last_trb; }; +struct xhci_dequeue_state { + struct xhci_segment *new_deq_seg; + union xhci_trb *new_deq_ptr; + int new_cycle_state; +}; + struct xhci_ring { struct xhci_segment *first_seg; union xhci_trb *enqueue; @@ -955,12 +961,6 @@ struct xhci_ring { u32 cycle_state; }; -struct xhci_dequeue_state { - struct xhci_segment *new_deq_seg; - union xhci_trb *new_deq_ptr; - int new_cycle_state; -}; - struct xhci_erst_entry { /* 64-bit event ring segment address */ u64 seg_addr; @@ -1063,6 +1063,7 @@ struct xhci_hcd { int error_bitmask; unsigned int quirks; #define XHCI_LINK_TRB_QUIRK (1 << 0) +#define XHCI_RESET_EP_QUIRK (1 << 1) }; /* For testing purposes */ @@ -1170,6 +1171,8 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev); unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc); unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc); +unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index); +unsigned int xhci_last_valid_endpoint(u32 added_ctxs); void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep); void xhci_endpoint_copy(struct xhci_hcd *xhci, struct xhci_virt_device *vdev, unsigned int ep_index); @@ -1233,8 +1236,11 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, unsigned int slot_id, unsigned int ep_index, struct xhci_dequeue_state *deq_state); void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, - struct usb_device *udev, struct usb_host_endpoint *ep, + struct usb_device *udev, unsigned int ep_index, struct xhci_ring *ep_ring); +void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci, + unsigned int slot_id, unsigned int ep_index, + struct xhci_dequeue_state *deq_state); /* xHCI roothub code */ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, |