aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/x86/kernel/Makefile_644
-rw-r--r--arch/x86/kernel/apic_64.c90
-rw-r--r--arch/x86/kernel/i8259_64.c46
-rw-r--r--arch/x86/kernel/smpboot_64.c4
-rw-r--r--arch/x86/kernel/time_64.c107
-rw-r--r--arch/x86_64/Kconfig6
-rw-r--r--include/asm-x86/hpet.h92
-rw-r--r--include/asm-x86/hpet_32.h90
-rw-r--r--include/asm-x86/hpet_64.h18
9 files changed, 158 insertions, 299 deletions
diff --git a/arch/x86/kernel/Makefile_64 b/arch/x86/kernel/Makefile_64
index 3ab017a0a3b..080154e3150 100644
--- a/arch/x86/kernel/Makefile_64
+++ b/arch/x86/kernel/Makefile_64
@@ -8,8 +8,8 @@ obj-y := process_64.o signal_64.o entry_64.o traps_64.o irq_64.o \
ptrace_64.o time_64.o ioport_64.o ldt_64.o setup_64.o i8259_64.o sys_x86_64.o \
x8664_ksyms_64.o i387_64.o syscall_64.o vsyscall_64.o \
setup64.o bootflag.o e820_64.o reboot_64.o quirks.o i8237.o \
- pci-dma_64.o pci-nommu_64.o alternative.o hpet_64.o tsc_64.o bugs_64.o \
- perfctr-watchdog.o
+ pci-dma_64.o pci-nommu_64.o alternative.o hpet_32.o tsc_64.o bugs_64.o \
+ perfctr-watchdog.o i8253_32.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_X86_MCE) += mce_64.o therm_throt.o
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index 2c2807abe1d..b0237caff71 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -857,25 +857,12 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
static void setup_APIC_timer(void)
{
- unsigned long flags;
- int irqen;
+ struct clock_event_device *levt = &__get_cpu_var(lapic_events);
- local_irq_save(flags);
+ memcpy(levt, &lapic_clockevent, sizeof(*levt));
+ levt->cpumask = cpumask_of_cpu(smp_processor_id());
- irqen = ! cpu_isset(smp_processor_id(),
- timer_interrupt_broadcast_ipi_mask);
- __setup_APIC_LVTT(calibration_result, 0, irqen);
- /* Turn off PIT interrupt if we use APIC timer as main timer.
- Only works with the PM timer right now
- TBD fix it for HPET too. */
- if ((pmtmr_ioport != 0) &&
- smp_processor_id() == boot_cpu_id &&
- apic_runs_main_timer == 1 &&
- !cpu_isset(boot_cpu_id, timer_interrupt_broadcast_ipi_mask)) {
- stop_timer_interrupt();
- apic_runs_main_timer++;
- }
- local_irq_restore(flags);
+ clockevents_register_device(levt);
}
/*
@@ -950,18 +937,34 @@ static void __init calibrate_APIC_clock(void)
void __init setup_boot_APIC_clock (void)
{
+ /*
+ * The local apic timer can be disabled via the kernel commandline.
+ * Register the lapic timer as a dummy clock event source on SMP
+ * systems, so the broadcast mechanism is used. On UP systems simply
+ * ignore it.
+ */
if (disable_apic_timer) {
printk(KERN_INFO "Disabling APIC timer\n");
+ /* No broadcast on UP ! */
+ if (num_possible_cpus() > 1)
+ setup_APIC_timer();
return;
}
printk(KERN_INFO "Using local APIC timer interrupts.\n");
- using_apic_timer = 1;
-
calibrate_APIC_clock();
+
/*
- * Now set up the timer for real.
+ * If nmi_watchdog is set to IO_APIC, we need the
+ * PIT/HPET going. Otherwise register lapic as a dummy
+ * device.
*/
+ if (nmi_watchdog != NMI_IO_APIC)
+ lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
+ else
+ printk(KERN_WARNING "APIC timer registered as dummy,"
+ " due to nmi_watchdog=1!\n");
+
setup_APIC_timer();
}
@@ -1073,22 +1076,34 @@ void setup_APIC_extended_lvt(unsigned char lvt_off, unsigned char vector,
void smp_local_timer_interrupt(void)
{
- profile_tick(CPU_PROFILING);
-#ifdef CONFIG_SMP
- update_process_times(user_mode(get_irq_regs()));
-#endif
- if (apic_runs_main_timer > 1 && smp_processor_id() == boot_cpu_id)
- main_timer_handler();
+ int cpu = smp_processor_id();
+ struct clock_event_device *evt = &per_cpu(lapic_events, cpu);
+
/*
- * We take the 'long' return path, and there every subsystem
- * grabs the appropriate locks (kernel lock/ irq lock).
- *
- * We might want to decouple profiling from the 'long path',
- * and do the profiling totally in assembly.
+ * Normally we should not be here till LAPIC has been initialized but
+ * in some cases like kdump, its possible that there is a pending LAPIC
+ * timer interrupt from previous kernel's context and is delivered in
+ * new kernel the moment interrupts are enabled.
*
- * Currently this isn't too much of an issue (performance wise),
- * we can take more than 100K local irqs per second on a 100 MHz P5.
+ * Interrupts are enabled early and LAPIC is setup much later, hence
+ * its possible that when we get here evt->event_handler is NULL.
+ * Check for event_handler being NULL and discard the interrupt as
+ * spurious.
*/
+ if (!evt->event_handler) {
+ printk(KERN_WARNING
+ "Spurious LAPIC timer interrupt on cpu %d\n", cpu);
+ /* Switch it off */
+ lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt);
+ return;
+ }
+
+ /*
+ * the NMI deadlock-detector uses this.
+ */
+ add_pda(apic_timer_irqs, 1);
+
+ evt->event_handler(evt);
}
/*
@@ -1104,11 +1119,6 @@ void smp_apic_timer_interrupt(struct pt_regs *regs)
struct pt_regs *old_regs = set_irq_regs(regs);
/*
- * the NMI deadlock-detector uses this.
- */
- add_pda(apic_timer_irqs, 1);
-
- /*
* NOTE! We'd better ACK the irq immediately,
* because timer handling can be slow.
*/
@@ -1291,7 +1301,7 @@ static __init int setup_noapictimer(char *str)
static __init int setup_apicmaintimer(char *str)
{
apic_runs_main_timer = 1;
- nohpet = 1;
+
return 1;
}
__setup("apicmaintimer", setup_apicmaintimer);
@@ -1307,7 +1317,7 @@ static __init int setup_apicpmtimer(char *s)
{
apic_calibrate_pmtmr = 1;
notsc_setup(NULL);
- return setup_apicmaintimer(NULL);
+ return 0;
}
__setup("apicpmtimer", setup_apicpmtimer);
diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c
index 948cae64609..eb72976cc13 100644
--- a/arch/x86/kernel/i8259_64.c
+++ b/arch/x86/kernel/i8259_64.c
@@ -444,46 +444,6 @@ void __init init_ISA_irqs (void)
}
}
-static void setup_timer_hardware(void)
-{
- outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */
- udelay(10);
- outb_p(LATCH & 0xff , 0x40); /* LSB */
- udelay(10);
- outb(LATCH >> 8 , 0x40); /* MSB */
-}
-
-static int timer_resume(struct sys_device *dev)
-{
- setup_timer_hardware();
- return 0;
-}
-
-void i8254_timer_resume(void)
-{
- setup_timer_hardware();
-}
-
-static struct sysdev_class timer_sysclass = {
- set_kset_name("timer_pit"),
- .resume = timer_resume,
-};
-
-static struct sys_device device_timer = {
- .id = 0,
- .cls = &timer_sysclass,
-};
-
-static int __init init_timer_sysfs(void)
-{
- int error = sysdev_class_register(&timer_sysclass);
- if (!error)
- error = sysdev_register(&device_timer);
- return error;
-}
-
-device_initcall(init_timer_sysfs);
-
void __init init_IRQ(void)
{
int i;
@@ -533,12 +493,6 @@ void __init init_IRQ(void)
set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
- /*
- * Set the clock to HZ Hz, we already have a valid
- * vector now:
- */
- setup_timer_hardware();
-
if (!acpi_ioapic)
setup_irq(2, &irq2);
}
diff --git a/arch/x86/kernel/smpboot_64.c b/arch/x86/kernel/smpboot_64.c
index 32f50783edc..57ccf7cb6b9 100644
--- a/arch/x86/kernel/smpboot_64.c
+++ b/arch/x86/kernel/smpboot_64.c
@@ -223,8 +223,6 @@ void __cpuinit smp_callin(void)
local_irq_disable();
Dprintk("Stack at about %p\n",&cpuid);
- disable_APIC_timer();
-
/*
* Save our processor parameters
*/
@@ -348,8 +346,6 @@ void __cpuinit start_secondary(void)
enable_8259A_irq(0);
}
- enable_APIC_timer();
-
/*
* The sibling maps must be set before turing the online map on for
* this cpu
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index d899216e01c..7781df1d50e 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -28,6 +28,8 @@
#include <linux/cpu.h>
#include <linux/kallsyms.h>
#include <linux/acpi.h>
+#include <linux/clockchips.h>
+
#ifdef CONFIG_ACPI
#include <acpi/achware.h> /* for PM timer frequency */
#include <acpi/acpi_bus.h>
@@ -46,12 +48,8 @@
#include <asm/nmi.h>
#include <asm/vgtod.h>
-static char *timename = NULL;
-
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL(rtc_lock);
-DEFINE_SPINLOCK(i8253_lock);
-EXPORT_SYMBOL(i8253_lock);
volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES;
@@ -194,6 +192,13 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static irqreturn_t timer_event_interrupt(int irq, void *dev_id)
+{
+ global_clock_event->event_handler(global_clock_event);
+
+ return IRQ_HANDLED;
+}
+
unsigned long read_persistent_clock(void)
{
unsigned int year, mon, day, hour, min, sec;
@@ -291,42 +296,8 @@ static unsigned int __init tsc_calibrate_cpu_khz(void)
return pmc_now * tsc_khz / (tsc_now - tsc_start);
}
-static void __pit_init(int val, u8 mode)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&i8253_lock, flags);
- outb_p(mode, PIT_MODE);
- outb_p(val & 0xff, PIT_CH0); /* LSB */
- outb_p(val >> 8, PIT_CH0); /* MSB */
- spin_unlock_irqrestore(&i8253_lock, flags);
-}
-
-void __init pit_init(void)
-{
- __pit_init(LATCH, 0x34); /* binary, mode 2, LSB/MSB, ch 0 */
-}
-
-void pit_stop_interrupt(void)
-{
- __pit_init(0, 0x30); /* mode 0 */
-}
-
-void stop_timer_interrupt(void)
-{
- char *name;
- if (hpet_address) {
- name = "HPET";
- hpet_timer_stop_set_go(0);
- } else {
- name = "PIT";
- pit_stop_interrupt();
- }
- printk(KERN_INFO "timer: %s interrupt stopped.\n", name);
-}
-
static struct irqaction irq0 = {
- .handler = timer_interrupt,
+ .handler = timer_event_interrupt,
.flags = IRQF_DISABLED | IRQF_IRQPOLL | IRQF_NOBALANCING,
.mask = CPU_MASK_NONE,
.name = "timer"
@@ -334,20 +305,10 @@ static struct irqaction irq0 = {
void __init time_init(void)
{
- if (nohpet)
- hpet_address = 0;
-
- if (hpet_arch_init())
- hpet_address = 0;
+ if (!hpet_enable())
+ setup_pit_timer();
- if (hpet_use_timer) {
- /* set tick_nsec to use the proper rate for HPET */
- tick_nsec = TICK_NSEC_HPET;
- timename = "HPET";
- } else {
- pit_init();
- timename = "PIT";
- }
+ setup_irq(0, &irq0);
tsc_calibrate();
@@ -369,46 +330,4 @@ void __init time_init(void)
printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
cpu_khz / 1000, cpu_khz % 1000);
init_tsc_clocksource();
-
- setup_irq(0, &irq0);
-}
-
-/*
- * sysfs support for the timer.
- */
-
-static int timer_suspend(struct sys_device *dev, pm_message_t state)
-{
- return 0;
}
-
-static int timer_resume(struct sys_device *dev)
-{
- if (hpet_address)
- hpet_reenable();
- else
- i8254_timer_resume();
- return 0;
-}
-
-static struct sysdev_class timer_sysclass = {
- .resume = timer_resume,
- .suspend = timer_suspend,
- set_kset_name("timer"),
-};
-
-/* XXX this sysfs stuff should probably go elsewhere later -john */
-static struct sys_device device_timer = {
- .id = 0,
- .cls = &timer_sysclass,
-};
-
-static int time_init_device(void)
-{
- int error = sysdev_class_register(&timer_sysclass);
- if (!error)
- error = sysdev_register(&device_timer);
- return error;
-}
-
-device_initcall(time_init_device);
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index a9534c21c30..eb80f5aca54 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -40,7 +40,11 @@ config CLOCKSOURCE_WATCHDOG
bool
default y
-config GENERIC_CLOCKEVENTS_MIGR
+config GENERIC_CLOCKEVENTS
+ bool
+ default y
+
+config GENERIC_CLOCKEVENTS_BROADCAST
bool
default y
diff --git a/include/asm-x86/hpet.h b/include/asm-x86/hpet.h
index 9eff4860125..e2976ed30b7 100644
--- a/include/asm-x86/hpet.h
+++ b/include/asm-x86/hpet.h
@@ -1,5 +1,89 @@
-#ifdef CONFIG_X86_32
-# include "hpet_32.h"
+#ifndef ASM_X86_HPET_H
+#define ASM_X86_HPET_H
+
+#ifdef CONFIG_HPET_TIMER
+
+/*
+ * Documentation on HPET can be found at:
+ * http://www.intel.com/ial/home/sp/pcmmspec.htm
+ * ftp://download.intel.com/ial/home/sp/mmts098.pdf
+ */
+
+#define HPET_MMAP_SIZE 1024
+
+#define HPET_ID 0x000
+#define HPET_PERIOD 0x004
+#define HPET_CFG 0x010
+#define HPET_STATUS 0x020
+#define HPET_COUNTER 0x0f0
+#define HPET_T0_CFG 0x100
+#define HPET_T0_CMP 0x108
+#define HPET_T0_ROUTE 0x110
+#define HPET_T1_CFG 0x120
+#define HPET_T1_CMP 0x128
+#define HPET_T1_ROUTE 0x130
+#define HPET_T2_CFG 0x140
+#define HPET_T2_CMP 0x148
+#define HPET_T2_ROUTE 0x150
+
+#define HPET_ID_REV 0x000000ff
+#define HPET_ID_NUMBER 0x00001f00
+#define HPET_ID_64BIT 0x00002000
+#define HPET_ID_LEGSUP 0x00008000
+#define HPET_ID_VENDOR 0xffff0000
+#define HPET_ID_NUMBER_SHIFT 8
+#define HPET_ID_VENDOR_SHIFT 16
+
+#define HPET_ID_VENDOR_8086 0x8086
+
+#define HPET_CFG_ENABLE 0x001
+#define HPET_CFG_LEGACY 0x002
+#define HPET_LEGACY_8254 2
+#define HPET_LEGACY_RTC 8
+
+#define HPET_TN_LEVEL 0x0002
+#define HPET_TN_ENABLE 0x0004
+#define HPET_TN_PERIODIC 0x0008
+#define HPET_TN_PERIODIC_CAP 0x0010
+#define HPET_TN_64BIT_CAP 0x0020
+#define HPET_TN_SETVAL 0x0040
+#define HPET_TN_32BIT 0x0100
+#define HPET_TN_ROUTE 0x3e00
+#define HPET_TN_FSB 0x4000
+#define HPET_TN_FSB_CAP 0x8000
+#define HPET_TN_ROUTE_SHIFT 9
+
+/* Max HPET Period is 10^8 femto sec as in HPET spec */
+#define HPET_MAX_PERIOD 100000000UL
+/*
+ * Min HPET period is 10^5 femto sec just for safety. If it is less than this,
+ * then 32 bit HPET counter wrapsaround in less than 0.5 sec.
+ */
+#define HPET_MIN_PERIOD 100000UL
+
+/* hpet memory map physical address */
+extern unsigned long hpet_address;
+extern int is_hpet_enabled(void);
+extern int hpet_enable(void);
+
+#ifdef CONFIG_HPET_EMULATE_RTC
+
+#include <linux/interrupt.h>
+
+extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask);
+extern int hpet_set_rtc_irq_bit(unsigned long bit_mask);
+extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min,
+ unsigned char sec);
+extern int hpet_set_periodic_freq(unsigned long freq);
+extern int hpet_rtc_dropped_irq(void);
+extern int hpet_rtc_timer_init(void);
+extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id);
+
+#endif /* CONFIG_HPET_EMULATE_RTC */
+
#else
-# include "hpet_64.h"
-#endif
+
+static inline int hpet_enable(void) { return 0; }
+
+#endif /* CONFIG_HPET_TIMER */
+#endif /* ASM_X86_HPET_H */
diff --git a/include/asm-x86/hpet_32.h b/include/asm-x86/hpet_32.h
deleted file mode 100644
index c82dc7ed96b..00000000000
--- a/include/asm-x86/hpet_32.h
+++ /dev/null
@@ -1,90 +0,0 @@
-
-#ifndef _I386_HPET_H
-#define _I386_HPET_H
-
-#ifdef CONFIG_HPET_TIMER
-
-/*
- * Documentation on HPET can be found at:
- * http://www.intel.com/ial/home/sp/pcmmspec.htm
- * ftp://download.intel.com/ial/home/sp/mmts098.pdf
- */
-
-#define HPET_MMAP_SIZE 1024
-
-#define HPET_ID 0x000
-#define HPET_PERIOD 0x004
-#define HPET_CFG 0x010
-#define HPET_STATUS 0x020
-#define HPET_COUNTER 0x0f0
-#define HPET_T0_CFG 0x100
-#define HPET_T0_CMP 0x108
-#define HPET_T0_ROUTE 0x110
-#define HPET_T1_CFG 0x120
-#define HPET_T1_CMP 0x128
-#define HPET_T1_ROUTE 0x130
-#define HPET_T2_CFG 0x140
-#define HPET_T2_CMP 0x148
-#define HPET_T2_ROUTE 0x150
-
-#define HPET_ID_REV 0x000000ff
-#define HPET_ID_NUMBER 0x00001f00
-#define HPET_ID_64BIT 0x00002000
-#define HPET_ID_LEGSUP 0x00008000
-#define HPET_ID_VENDOR 0xffff0000
-#define HPET_ID_NUMBER_SHIFT 8
-#define HPET_ID_VENDOR_SHIFT 16
-
-#define HPET_ID_VENDOR_8086 0x8086
-
-#define HPET_CFG_ENABLE 0x001
-#define HPET_CFG_LEGACY 0x002
-#define HPET_LEGACY_8254 2
-#define HPET_LEGACY_RTC 8
-
-#define HPET_TN_LEVEL 0x0002
-#define HPET_TN_ENABLE 0x0004
-#define HPET_TN_PERIODIC 0x0008
-#define HPET_TN_PERIODIC_CAP 0x0010
-#define HPET_TN_64BIT_CAP 0x0020
-#define HPET_TN_SETVAL 0x0040
-#define HPET_TN_32BIT 0x0100
-#define HPET_TN_ROUTE 0x3e00
-#define HPET_TN_FSB 0x4000
-#define HPET_TN_FSB_CAP 0x8000
-#define HPET_TN_ROUTE_SHIFT 9
-
-/* Max HPET Period is 10^8 femto sec as in HPET spec */
-#define HPET_MAX_PERIOD 100000000UL
-/*
- * Min HPET period is 10^5 femto sec just for safety. If it is less than this,
- * then 32 bit HPET counter wrapsaround in less than 0.5 sec.
- */
-#define HPET_MIN_PERIOD 100000UL
-
-/* hpet memory map physical address */
-extern unsigned long hpet_address;
-extern int is_hpet_enabled(void);
-extern int hpet_enable(void);
-
-#ifdef CONFIG_HPET_EMULATE_RTC
-
-#include <linux/interrupt.h>
-
-extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask);
-extern int hpet_set_rtc_irq_bit(unsigned long bit_mask);
-extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min,
- unsigned char sec);
-extern int hpet_set_periodic_freq(unsigned long freq);
-extern int hpet_rtc_dropped_irq(void);
-extern int hpet_rtc_timer_init(void);
-extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id);
-
-#endif /* CONFIG_HPET_EMULATE_RTC */
-
-#else
-
-static inline int hpet_enable(void) { return 0; }
-
-#endif /* CONFIG_HPET_TIMER */
-#endif /* _I386_HPET_H */
diff --git a/include/asm-x86/hpet_64.h b/include/asm-x86/hpet_64.h
deleted file mode 100644
index fd4decac93a..00000000000
--- a/include/asm-x86/hpet_64.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _ASM_X8664_HPET_H
-#define _ASM_X8664_HPET_H 1
-
-#include <asm/hpet_32.h>
-
-#define HPET_TICK_RATE (HZ * 100000UL)
-
-extern int hpet_rtc_timer_init(void);
-extern int hpet_arch_init(void);
-extern int hpet_timer_stop_set_go(unsigned long tick);
-extern int hpet_reenable(void);
-extern unsigned int hpet_calibrate_tsc(void);
-
-extern int hpet_use_timer;
-extern unsigned long hpet_period;
-extern unsigned long hpet_tick;
-
-#endif