aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/video/geode/display_gx.c28
-rw-r--r--drivers/video/geode/display_gx.h78
-rw-r--r--drivers/video/geode/gxfb.h222
-rw-r--r--drivers/video/geode/video_gx.c92
-rw-r--r--drivers/video/geode/video_gx.h39
5 files changed, 276 insertions, 183 deletions
diff --git a/drivers/video/geode/display_gx.c b/drivers/video/geode/display_gx.c
index 47f422e1997..acf20bf2d26 100644
--- a/drivers/video/geode/display_gx.c
+++ b/drivers/video/geode/display_gx.c
@@ -51,20 +51,21 @@ static void gx_set_mode(struct fb_info *info)
int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
/* Unlock the display controller registers. */
- write_dc(par, DC_UNLOCK, DC_UNLOCK_CODE);
+ write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
gcfg = read_dc(par, DC_GENERAL_CFG);
dcfg = read_dc(par, DC_DISPLAY_CFG);
/* Disable the timing generator. */
- dcfg &= ~(DC_DCFG_TGEN);
+ dcfg &= ~DC_DISPLAY_CFG_TGEN;
write_dc(par, DC_DISPLAY_CFG, dcfg);
/* Wait for pending memory requests before disabling the FIFO load. */
udelay(100);
/* Disable FIFO load and compression. */
- gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
+ gcfg &= ~(DC_GENERAL_CFG_DFLE | DC_GENERAL_CFG_CMPE |
+ DC_GENERAL_CFG_DECE);
write_dc(par, DC_GENERAL_CFG, gcfg);
/* Setup DCLK and its divisor. */
@@ -75,12 +76,13 @@ static void gx_set_mode(struct fb_info *info)
*/
/* Clear all unused feature bits. */
- gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE;
+ gcfg &= DC_GENERAL_CFG_YUVM | DC_GENERAL_CFG_VDSE;
dcfg = 0;
/* Set FIFO priority (default 6/5) and enable. */
/* FIXME: increase fifo priority for 1280x1024 and higher modes? */
- gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
+ gcfg |= (6 << DC_GENERAL_CFG_DFHPEL_SHIFT) |
+ (5 << DC_GENERAL_CFG_DFHPSL_SHIFT) | DC_GENERAL_CFG_DFLE;
/* Framebuffer start offset. */
write_dc(par, DC_FB_ST_OFFSET, 0);
@@ -92,25 +94,25 @@ static void gx_set_mode(struct fb_info *info)
/* Enable graphics and video data and unmask address lines. */
- dcfg |= DC_DCFG_GDEN | DC_DCFG_VDEN | DC_DCFG_A20M | DC_DCFG_A18M;
+ dcfg |= DC_DISPLAY_CFG_GDEN | DC_DISPLAY_CFG_VDEN |
+ DC_DISPLAY_CFG_A20M | DC_DISPLAY_CFG_A18M;
/* Set pixel format. */
switch (info->var.bits_per_pixel) {
case 8:
- dcfg |= DC_DCFG_DISP_MODE_8BPP;
+ dcfg |= DC_DISPLAY_CFG_DISP_MODE_8BPP;
break;
case 16:
- dcfg |= DC_DCFG_DISP_MODE_16BPP;
- dcfg |= DC_DCFG_16BPP_MODE_565;
+ dcfg |= DC_DISPLAY_CFG_DISP_MODE_16BPP;
break;
case 32:
- dcfg |= DC_DCFG_DISP_MODE_24BPP;
- dcfg |= DC_DCFG_PALB;
+ dcfg |= DC_DISPLAY_CFG_DISP_MODE_24BPP;
+ dcfg |= DC_DISPLAY_CFG_PALB;
break;
}
/* Enable timing generator. */
- dcfg |= DC_DCFG_TGEN;
+ dcfg |= DC_DISPLAY_CFG_TGEN;
/* Horizontal and vertical timings. */
hactive = info->var.xres;
@@ -148,7 +150,7 @@ static void gx_set_mode(struct fb_info *info)
par->vid_ops->configure_display(info);
/* Relock display controller registers */
- write_dc(par, DC_UNLOCK, 0);
+ write_dc(par, DC_UNLOCK, DC_UNLOCK_LOCK);
}
static void gx_set_hw_palette_reg(struct fb_info *info, unsigned regno,
diff --git a/drivers/video/geode/display_gx.h b/drivers/video/geode/display_gx.h
index df94e4fc662..56e9d2ea52c 100644
--- a/drivers/video/geode/display_gx.h
+++ b/drivers/video/geode/display_gx.h
@@ -19,82 +19,4 @@ extern struct geode_dc_ops gx_dc_ops;
/* MSR that tells us if a TFT or CRT is attached */
#define GLD_MSR_CONFIG_DM_FP 0x40
-/* Display controller registers */
-
-#define DC_UNLOCK 0x00
-# define DC_UNLOCK_CODE 0x00004758
-
-#define DC_GENERAL_CFG 0x04
-# define DC_GCFG_DFLE 0x00000001
-# define DC_GCFG_CURE 0x00000002
-# define DC_GCFG_ICNE 0x00000004
-# define DC_GCFG_VIDE 0x00000008
-# define DC_GCFG_CMPE 0x00000020
-# define DC_GCFG_DECE 0x00000040
-# define DC_GCFG_VGAE 0x00000080
-# define DC_GCFG_DFHPSL_MASK 0x00000F00
-# define DC_GCFG_DFHPSL_POS 8
-# define DC_GCFG_DFHPEL_MASK 0x0000F000
-# define DC_GCFG_DFHPEL_POS 12
-# define DC_GCFG_STFM 0x00010000
-# define DC_GCFG_FDTY 0x00020000
-# define DC_GCFG_VGAFT 0x00040000
-# define DC_GCFG_VDSE 0x00080000
-# define DC_GCFG_YUVM 0x00100000
-# define DC_GCFG_VFSL 0x00800000
-# define DC_GCFG_SIGE 0x01000000
-# define DC_GCFG_SGRE 0x02000000
-# define DC_GCFG_SGFR 0x04000000
-# define DC_GCFG_CRC_MODE 0x08000000
-# define DC_GCFG_DIAG 0x10000000
-# define DC_GCFG_CFRW 0x20000000
-
-#define DC_DISPLAY_CFG 0x08
-# define DC_DCFG_TGEN 0x00000001
-# define DC_DCFG_GDEN 0x00000008
-# define DC_DCFG_VDEN 0x00000010
-# define DC_DCFG_TRUP 0x00000040
-# define DC_DCFG_DISP_MODE_MASK 0x00000300
-# define DC_DCFG_DISP_MODE_8BPP 0x00000000
-# define DC_DCFG_DISP_MODE_16BPP 0x00000100
-# define DC_DCFG_DISP_MODE_24BPP 0x00000200
-# define DC_DCFG_16BPP_MODE_MASK 0x00000c00
-# define DC_DCFG_16BPP_MODE_565 0x00000000
-# define DC_DCFG_16BPP_MODE_555 0x00000100
-# define DC_DCFG_16BPP_MODE_444 0x00000200
-# define DC_DCFG_DCEN 0x00080000
-# define DC_DCFG_PALB 0x02000000
-# define DC_DCFG_FRLK 0x04000000
-# define DC_DCFG_VISL 0x08000000
-# define DC_DCFG_FRSL 0x20000000
-# define DC_DCFG_A18M 0x40000000
-# define DC_DCFG_A20M 0x80000000
-
-#define DC_FB_ST_OFFSET 0x10
-
-#define DC_LINE_SIZE 0x30
-# define DC_LINE_SIZE_FB_LINE_SIZE_MASK 0x000007ff
-# define DC_LINE_SIZE_FB_LINE_SIZE_POS 0
-# define DC_LINE_SIZE_CB_LINE_SIZE_MASK 0x007f0000
-# define DC_LINE_SIZE_CB_LINE_SIZE_POS 16
-# define DC_LINE_SIZE_VID_LINE_SIZE_MASK 0xff000000
-# define DC_LINE_SIZE_VID_LINE_SIZE_POS 24
-
-#define DC_GFX_PITCH 0x34
-# define DC_GFX_PITCH_FB_PITCH_MASK 0x0000ffff
-# define DC_GFX_PITCH_FB_PITCH_POS 0
-# define DC_GFX_PITCH_CB_PITCH_MASK 0xffff0000
-# define DC_GFX_PITCH_CB_PITCH_POS 16
-
-#define DC_H_ACTIVE_TIMING 0x40
-#define DC_H_BLANK_TIMING 0x44
-#define DC_H_SYNC_TIMING 0x48
-#define DC_V_ACTIVE_TIMING 0x50
-#define DC_V_BLANK_TIMING 0x54
-#define DC_V_SYNC_TIMING 0x58
-
-#define DC_PAL_ADDRESS 0x70
-#define DC_PAL_DATA 0x74
-
-#define DC_GLIU0_MEM_OFFSET 0x84
#endif /* !__DISPLAY_GX1_H__ */
diff --git a/drivers/video/geode/gxfb.h b/drivers/video/geode/gxfb.h
index 42fa10db619..d408ad354d2 100644
--- a/drivers/video/geode/gxfb.h
+++ b/drivers/video/geode/gxfb.h
@@ -13,35 +13,243 @@
#include <linux/io.h>
+/* Display Controller registers (table 6-38 from the data book) */
+enum dc_registers {
+ DC_UNLOCK = 0,
+ DC_GENERAL_CFG,
+ DC_DISPLAY_CFG,
+ DC_RSVD_0,
+
+ DC_FB_ST_OFFSET,
+ DC_CB_ST_OFFSET,
+ DC_CURS_ST_OFFSET,
+ DC_ICON_ST_OFFSET,
+
+ DC_VID_Y_ST_OFFSET,
+ DC_VID_U_ST_OFFSET,
+ DC_VID_V_ST_OFFSET,
+ DC_RSVD_1,
+
+ DC_LINE_SIZE,
+ DC_GFX_PITCH,
+ DC_VID_YUV_PITCH,
+ DC_RSVD_2,
+
+ DC_H_ACTIVE_TIMING,
+ DC_H_BLANK_TIMING,
+ DC_H_SYNC_TIMING,
+ DC_RSVD_3,
+
+ DC_V_ACTIVE_TIMING,
+ DC_V_BLANK_TIMING,
+ DC_V_SYNC_TIMING,
+ DC_RSVD_4,
+
+ DC_CURSOR_X,
+ DC_CURSOR_Y,
+ DC_ICON_X,
+ DC_LINE_CNT,
+
+ DC_PAL_ADDRESS,
+ DC_PAL_DATA,
+ DC_DFIFO_DIAG,
+ DC_CFIFO_DIAG,
+
+ DC_VID_DS_DELTA,
+ DC_GLIU0_MEM_OFFSET,
+ DC_RSVD_5,
+ DC_DV_ACC, /* 0x8c */
+};
+
+#define DC_UNLOCK_LOCK 0x00000000
+#define DC_UNLOCK_UNLOCK 0x00004758 /* magic value */
+
+#define DC_GENERAL_CFG_YUVM (1 << 20)
+#define DC_GENERAL_CFG_VDSE (1 << 19)
+#define DC_GENERAL_CFG_DFHPEL_SHIFT 12
+#define DC_GENERAL_CFG_DFHPSL_SHIFT 8
+#define DC_GENERAL_CFG_DECE (1 << 6)
+#define DC_GENERAL_CFG_CMPE (1 << 5)
+#define DC_GENERAL_CFG_VIDE (1 << 3)
+#define DC_GENERAL_CFG_ICNE (1 << 2)
+#define DC_GENERAL_CFG_CURE (1 << 1)
+#define DC_GENERAL_CFG_DFLE (1 << 0)
+
+#define DC_DISPLAY_CFG_A20M (1 << 31)
+#define DC_DISPLAY_CFG_A18M (1 << 30)
+#define DC_DISPLAY_CFG_PALB (1 << 25)
+#define DC_DISPLAY_CFG_DISP_MODE_24BPP (1 << 9)
+#define DC_DISPLAY_CFG_DISP_MODE_16BPP (1 << 8)
+#define DC_DISPLAY_CFG_DISP_MODE_8BPP (0)
+#define DC_DISPLAY_CFG_VDEN (1 << 4)
+#define DC_DISPLAY_CFG_GDEN (1 << 3)
+#define DC_DISPLAY_CFG_TGEN (1 << 0)
+
+
+/*
+ * Video Processor registers (table 6-54).
+ * There is space for 64 bit values, but we never use more than the
+ * lower 32 bits. The actual register save/restore code only bothers
+ * to restore those 32 bits.
+ */
+enum vp_registers {
+ VP_VCFG = 0,
+ VP_DCFG,
+
+ VP_VX,
+ VP_VY,
+
+ VP_VS,
+ VP_VCK,
+
+ VP_VCM,
+ VP_GAR,
+
+ VP_GDR,
+ VP_RSVD_0,
+
+ VP_MISC,
+ VP_CCS,
+
+ VP_RSVD_1,
+ VP_RSVD_2,
+
+ VP_RSVD_3,
+ VP_VDC,
+
+ VP_VCO,
+ VP_CRC,
+
+ VP_CRC32,
+ VP_VDE,
+
+ VP_CCK,
+ VP_CCM,
+
+ VP_CC1,
+ VP_CC2,
+
+ VP_A1X,
+ VP_A1Y,
+
+ VP_A1C,
+ VP_A1T,
+
+ VP_A2X,
+ VP_A2Y,
+
+ VP_A2C,
+ VP_A2T,
+
+ VP_A3X,
+ VP_A3Y,
+
+ VP_A3C,
+ VP_A3T,
+
+ VP_VRR,
+ VP_AWT,
+
+ VP_VTM, /* 0x130 */
+};
+
+#define VP_VCFG_VID_EN (1 << 0)
+
+#define VP_DCFG_DAC_VREF (1 << 26)
+#define VP_DCFG_GV_GAM (1 << 21)
+#define VP_DCFG_VG_CK (1 << 20)
+#define VP_DCFG_CRT_SYNC_SKW_DEFAULT (1 << 16)
+#define VP_DCFG_CRT_SYNC_SKW ((1 << 14) | (1 << 15) | (1 << 16))
+#define VP_DCFG_CRT_VSYNC_POL (1 << 9)
+#define VP_DCFG_CRT_HSYNC_POL (1 << 8)
+#define VP_DCFG_FP_DATA_EN (1 << 7) /* undocumented */
+#define VP_DCFG_FP_PWR_EN (1 << 6) /* undocumented */
+#define VP_DCFG_DAC_BL_EN (1 << 3)
+#define VP_DCFG_VSYNC_EN (1 << 2)
+#define VP_DCFG_HSYNC_EN (1 << 1)
+#define VP_DCFG_CRT_EN (1 << 0)
+
+#define VP_MISC_GAM_EN (1 << 0)
+#define VP_MISC_DACPWRDN (1 << 10)
+#define VP_MISC_APWRDN (1 << 11)
+
+
+/*
+ * Flat Panel registers (table 6-55).
+ * Also 64 bit registers; see above note about 32-bit handling.
+ */
+
+/* we're actually in the VP register space, starting at address 0x400 */
+#define VP_FP_START 0x400
+
+enum fp_registers {
+ FP_PT1 = 0,
+ FP_PT2,
+
+ FP_PM,
+ FP_DFC,
+
+ FP_BLFSR,
+ FP_RLFSR,
+
+ FP_FMI,
+ FP_FMD,
+
+ FP_RSVD_0,
+ FP_DCA,
+
+ FP_DMD,
+ FP_CRC,
+
+ FP_FBB, /* 0x460 */
+};
+
+#define FP_PT1_VSIZE_SHIFT 16 /* undocumented? */
+#define FP_PT1_VSIZE_MASK 0x7FF0000 /* undocumented? */
+
+#define FP_PT2_HSP (1 << 22)
+#define FP_PT2_VSP (1 << 23)
+
+#define FP_PM_P (1 << 24) /* panel power on */
+#define FP_PM_PANEL_PWR_UP (1 << 3) /* r/o */
+#define FP_PM_PANEL_PWR_DOWN (1 << 2) /* r/o */
+#define FP_PM_PANEL_OFF (1 << 1) /* r/o */
+#define FP_PM_PANEL_ON (1 << 0) /* r/o */
+
+#define FP_DFC_NFI ((1 << 4) | (1 << 5) | (1 << 6))
+
+
+/* register access functions */
+
static inline uint32_t read_dc(struct geodefb_par *par, int reg)
{
- return readl(par->dc_regs + reg);
+ return readl(par->dc_regs + 4*reg);
}
static inline void write_dc(struct geodefb_par *par, int reg, uint32_t val)
{
- writel(val, par->dc_regs + reg);
-
+ writel(val, par->dc_regs + 4*reg);
}
+
static inline uint32_t read_vp(struct geodefb_par *par, int reg)
{
- return readl(par->vid_regs + reg);
+ return readl(par->vid_regs + 8*reg);
}
static inline void write_vp(struct geodefb_par *par, int reg, uint32_t val)
{
- writel(val, par->vid_regs + reg);
+ writel(val, par->vid_regs + 8*reg);
}
static inline uint32_t read_fp(struct geodefb_par *par, int reg)
{
- return readl(par->vid_regs + reg);
+ return readl(par->vid_regs + 8*reg + VP_FP_START);
}
static inline void write_fp(struct geodefb_par *par, int reg, uint32_t val)
{
- writel(val, par->vid_regs + reg);
+ writel(val, par->vid_regs + 8*reg + VP_FP_START);
}
#endif
diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c
index e45d94143da..1b98b7b4e85 100644
--- a/drivers/video/geode/video_gx.c
+++ b/drivers/video/geode/video_gx.c
@@ -193,16 +193,16 @@ gx_configure_tft(struct fb_info *info)
/* Turn off the panel */
- fp = read_fp(par, GX_FP_PM);
- fp &= ~GX_FP_PM_P;
- write_fp(par, GX_FP_PM, fp);
+ fp = read_fp(par, FP_PM);
+ fp &= ~FP_PM_P;
+ write_fp(par, FP_PM, fp);
/* Set timing 1 */
- fp = read_fp(par, GX_FP_PT1);
- fp &= GX_FP_PT1_VSIZE_MASK;
- fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
- write_fp(par, GX_FP_PT1, fp);
+ fp = read_fp(par, FP_PT1);
+ fp &= FP_PT1_VSIZE_MASK;
+ fp |= info->var.yres << FP_PT1_VSIZE_SHIFT;
+ write_fp(par, FP_PT1, fp);
/* Timing 2 */
/* Set bits that are always on for TFT */
@@ -212,27 +212,27 @@ gx_configure_tft(struct fb_info *info)
/* Configure sync polarity */
if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
- fp |= GX_FP_PT2_VSP;
+ fp |= FP_PT2_VSP;
if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
- fp |= GX_FP_PT2_HSP;
+ fp |= FP_PT2_HSP;
- write_fp(par, GX_FP_PT2, fp);
+ write_fp(par, FP_PT2, fp);
/* Set the dither control */
- write_fp(par, GX_FP_DFC, 0x70);
+ write_fp(par, FP_DFC, FP_DFC_NFI);
/* Enable the FP data and power (in case the BIOS didn't) */
- fp = read_vp(par, GX_DCFG);
- fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN;
- write_vp(par, GX_DCFG, fp);
+ fp = read_vp(par, VP_DCFG);
+ fp |= VP_DCFG_FP_PWR_EN | VP_DCFG_FP_DATA_EN;
+ write_vp(par, VP_DCFG, fp);
/* Unblank the panel */
- fp = read_fp(par, GX_FP_PM);
- fp |= GX_FP_PM_P;
- write_fp(par, GX_FP_PM, fp);
+ fp = read_fp(par, FP_PM);
+ fp |= FP_PM_P;
+ write_fp(par, FP_PM, fp);
}
static void gx_configure_display(struct fb_info *info)
@@ -241,55 +241,55 @@ static void gx_configure_display(struct fb_info *info)
u32 dcfg, misc;
/* Write the display configuration */
- dcfg = read_vp(par, GX_DCFG);
+ dcfg = read_vp(par, VP_DCFG);
/* Disable hsync and vsync */
- dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
- write_vp(par, GX_DCFG, dcfg);
+ dcfg &= ~(VP_DCFG_VSYNC_EN | VP_DCFG_HSYNC_EN);
+ write_vp(par, VP_DCFG, dcfg);
/* Clear bits from existing mode. */
- dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
- | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL
- | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
+ dcfg &= ~(VP_DCFG_CRT_SYNC_SKW
+ | VP_DCFG_CRT_HSYNC_POL | VP_DCFG_CRT_VSYNC_POL
+ | VP_DCFG_VSYNC_EN | VP_DCFG_HSYNC_EN);
/* Set default sync skew. */
- dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT;
+ dcfg |= VP_DCFG_CRT_SYNC_SKW_DEFAULT;
/* Enable hsync and vsync. */
- dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN;
+ dcfg |= VP_DCFG_HSYNC_EN | VP_DCFG_VSYNC_EN;
- misc = read_vp(par, GX_MISC);
+ misc = read_vp(par, VP_MISC);
/* Disable gamma correction */
- misc |= GX_MISC_GAM_EN;
+ misc |= VP_MISC_GAM_EN;
if (par->enable_crt) {
/* Power up the CRT DACs */
- misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
- write_vp(par, GX_MISC, misc);
+ misc &= ~(VP_MISC_APWRDN | VP_MISC_DACPWRDN);
+ write_vp(par, VP_MISC, misc);
/* Only change the sync polarities if we are running
* in CRT mode. The FP polarities will be handled in
* gxfb_configure_tft */
if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
- dcfg |= GX_DCFG_CRT_HSYNC_POL;
+ dcfg |= VP_DCFG_CRT_HSYNC_POL;
if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
- dcfg |= GX_DCFG_CRT_VSYNC_POL;
+ dcfg |= VP_DCFG_CRT_VSYNC_POL;
} else {
/* Power down the CRT DACs if in FP mode */
- misc |= (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
- write_vp(par, GX_MISC, misc);
+ misc |= (VP_MISC_APWRDN | VP_MISC_DACPWRDN);
+ write_vp(par, VP_MISC, misc);
}
/* Enable the display logic */
/* Set up the DACS to blank normally */
- dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
+ dcfg |= VP_DCFG_CRT_EN | VP_DCFG_DAC_BL_EN;
/* Enable the external DAC VREF? */
- write_vp(par, GX_DCFG, dcfg);
+ write_vp(par, VP_DCFG, dcfg);
/* Set up the flat panel (if it is enabled) */
@@ -323,26 +323,26 @@ static int gx_blank_display(struct fb_info *info, int blank_mode)
default:
return -EINVAL;
}
- dcfg = read_vp(par, GX_DCFG);
- dcfg &= ~(GX_DCFG_DAC_BL_EN
- | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN);
+ dcfg = read_vp(par, VP_DCFG);
+ dcfg &= ~(VP_DCFG_DAC_BL_EN
+ | VP_DCFG_HSYNC_EN | VP_DCFG_VSYNC_EN);
if (!blank)
- dcfg |= GX_DCFG_DAC_BL_EN;
+ dcfg |= VP_DCFG_DAC_BL_EN;
if (hsync)
- dcfg |= GX_DCFG_HSYNC_EN;
+ dcfg |= VP_DCFG_HSYNC_EN;
if (vsync)
- dcfg |= GX_DCFG_VSYNC_EN;
- write_vp(par, GX_DCFG, dcfg);
+ dcfg |= VP_DCFG_VSYNC_EN;
+ write_vp(par, VP_DCFG, dcfg);
/* Power on/off flat panel. */
if (par->enable_crt == 0) {
- fp_pm = read_fp(par, GX_FP_PM);
+ fp_pm = read_fp(par, FP_PM);
if (blank_mode == FB_BLANK_POWERDOWN)
- fp_pm &= ~GX_FP_PM_P;
+ fp_pm &= ~FP_PM_P;
else
- fp_pm |= GX_FP_PM_P;
- write_fp(par, GX_FP_PM, fp_pm);
+ fp_pm |= FP_PM_P;
+ write_fp(par, FP_PM, fp_pm);
}
return 0;
diff --git a/drivers/video/geode/video_gx.h b/drivers/video/geode/video_gx.h
index d21bca02059..5457bd04ec7 100644
--- a/drivers/video/geode/video_gx.h
+++ b/drivers/video/geode/video_gx.h
@@ -17,45 +17,6 @@ extern struct geode_vid_ops gx_vid_ops;
#define GX_VP_PAD_SELECT_MASK 0x3FFFFFFF
#define GX_VP_PAD_SELECT_TFT 0x1FFFFFFF
-/* Geode GX video processor registers */
-
-#define GX_DCFG 0x0008
-# define GX_DCFG_CRT_EN 0x00000001
-# define GX_DCFG_HSYNC_EN 0x00000002
-# define GX_DCFG_VSYNC_EN 0x00000004
-# define GX_DCFG_DAC_BL_EN 0x00000008
-# define GX_DCFG_FP_PWR_EN 0x00000040
-# define GX_DCFG_FP_DATA_EN 0x00000080
-# define GX_DCFG_CRT_HSYNC_POL 0x00000100
-# define GX_DCFG_CRT_VSYNC_POL 0x00000200
-# define GX_DCFG_CRT_SYNC_SKW_MASK 0x0001C000
-# define GX_DCFG_CRT_SYNC_SKW_DFLT 0x00010000
-# define GX_DCFG_VG_CK 0x00100000
-# define GX_DCFG_GV_GAM 0x00200000
-# define GX_DCFG_DAC_VREF 0x04000000
-
-/* Geode GX MISC video configuration */
-
-#define GX_MISC 0x50
-#define GX_MISC_GAM_EN 0x00000001
-#define GX_MISC_DAC_PWRDN 0x00000400
-#define GX_MISC_A_PWRDN 0x00000800
-
-/* Geode GX flat panel display control registers */
-
-#define GX_FP_PT1 0x0400
-#define GX_FP_PT1_VSIZE_MASK 0x7FF0000
-#define GX_FP_PT1_VSIZE_SHIFT 16
-
-#define GX_FP_PT2 0x408
-#define GX_FP_PT2_VSP (1 << 23)
-#define GX_FP_PT2_HSP (1 << 22)
-
-#define GX_FP_PM 0x410
-# define GX_FP_PM_P 0x01000000
-
-#define GX_FP_DFC 0x418
-
/* Geode GX clock control MSRs */
# define MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 (0x0000000000000002ull)