aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/kernel/entry_32.S6
-rw-r--r--arch/powerpc/kernel/process.c46
-rw-r--r--arch/powerpc/kernel/ptrace.c72
-rw-r--r--arch/powerpc/kernel/signal.c6
-rw-r--r--arch/powerpc/kernel/traps.c16
-rw-r--r--arch/powerpc/mm/fault.c25
-rw-r--r--include/asm-powerpc/system.h2
7 files changed, 138 insertions, 35 deletions
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index da52269aec1..81c8324a4a3 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -148,7 +148,7 @@ transfer_to_handler:
/* Check to see if the dbcr0 register is set up to debug. Use the
internal debug mode bit to do this. */
lwz r12,THREAD_DBCR0(r12)
- andis. r12,r12,DBCR0_IDM@h
+ andis. r12,r12,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h
beq+ 3f
/* From user and task is ptraced - load up global dbcr0 */
li r12,-1 /* clear all pending debug events */
@@ -292,7 +292,7 @@ syscall_exit_cont:
/* If the process has its own DBCR0 value, load it up. The internal
debug mode bit tells us that dbcr0 should be loaded. */
lwz r0,THREAD+THREAD_DBCR0(r2)
- andis. r10,r0,DBCR0_IDM@h
+ andis. r10,r0,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h
bnel- load_dbcr0
#endif
#ifdef CONFIG_44x
@@ -720,7 +720,7 @@ restore_user:
/* Check whether this process has its own DBCR0 value. The internal
debug mode bit tells us that dbcr0 should be loaded. */
lwz r0,THREAD+THREAD_DBCR0(r2)
- andis. r10,r0,DBCR0_IDM@h
+ andis. r10,r0,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h
bnel- load_dbcr0
#endif
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 219f3634115..db2497ccc11 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -47,6 +47,8 @@
#ifdef CONFIG_PPC64
#include <asm/firmware.h>
#endif
+#include <linux/kprobes.h>
+#include <linux/kdebug.h>
extern unsigned long _get_SP(void);
@@ -239,6 +241,35 @@ void discard_lazy_cpu_state(void)
}
#endif /* CONFIG_SMP */
+void do_dabr(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code)
+{
+ siginfo_t info;
+
+ if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
+ 11, SIGSEGV) == NOTIFY_STOP)
+ return;
+
+ if (debugger_dabr_match(regs))
+ return;
+
+ /* Clear the DAC and struct entries. One shot trigger */
+#if (defined(CONFIG_44x) || defined(CONFIG_BOOKE))
+ mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W
+ | DBCR0_IDM));
+#endif
+
+ /* Clear the DABR */
+ set_dabr(0);
+
+ /* Deliver the signal to userspace */
+ info.si_signo = SIGTRAP;
+ info.si_errno = 0;
+ info.si_code = TRAP_HWBKPT;
+ info.si_addr = (void __user *)address;
+ force_sig_info(SIGTRAP, &info, current);
+}
+
static DEFINE_PER_CPU(unsigned long, current_dabr);
int set_dabr(unsigned long dabr)
@@ -254,6 +285,11 @@ int set_dabr(unsigned long dabr)
#if defined(CONFIG_PPC64) || defined(CONFIG_6xx)
mtspr(SPRN_DABR, dabr);
#endif
+
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+ mtspr(SPRN_DAC1, dabr);
+#endif
+
return 0;
}
@@ -337,6 +373,12 @@ struct task_struct *__switch_to(struct task_struct *prev,
if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
set_dabr(new->thread.dabr);
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+ /* If new thread DAC (HW breakpoint) is the same then leave it */
+ if (new->thread.dabr)
+ set_dabr(new->thread.dabr);
+#endif
+
new_thread = &new->thread;
old_thread = &current->thread;
@@ -525,6 +567,10 @@ void flush_thread(void)
if (current->thread.dabr) {
current->thread.dabr = 0;
set_dabr(0);
+
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+ current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W);
+#endif
}
}
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 8feb93e7890..a5d0e78779c 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -703,7 +703,7 @@ void user_enable_single_step(struct task_struct *task)
if (regs != NULL) {
#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
- task->thread.dbcr0 = DBCR0_IDM | DBCR0_IC;
+ task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
regs->msr |= MSR_DE;
#else
regs->msr |= MSR_SE;
@@ -716,9 +716,16 @@ void user_disable_single_step(struct task_struct *task)
{
struct pt_regs *regs = task->thread.regs;
+
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+ /* If DAC then do not single step, skip */
+ if (task->thread.dabr)
+ return;
+#endif
+
if (regs != NULL) {
#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
- task->thread.dbcr0 = 0;
+ task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_IDM);
regs->msr &= ~MSR_DE;
#else
regs->msr &= ~MSR_SE;
@@ -727,22 +734,75 @@ void user_disable_single_step(struct task_struct *task)
clear_tsk_thread_flag(task, TIF_SINGLESTEP);
}
-static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
+int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
unsigned long data)
{
- /* We only support one DABR and no IABRS at the moment */
+ /* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
+ * For embedded processors we support one DAC and no IAC's at the
+ * moment.
+ */
if (addr > 0)
return -EINVAL;
- /* The bottom 3 bits are flags */
if ((data & ~0x7UL) >= TASK_SIZE)
return -EIO;
- /* Ensure translation is on */
+#ifdef CONFIG_PPC64
+
+ /* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
+ * It was assumed, on previous implementations, that 3 bits were
+ * passed together with the data address, fitting the design of the
+ * DABR register, as follows:
+ *
+ * bit 0: Read flag
+ * bit 1: Write flag
+ * bit 2: Breakpoint translation
+ *
+ * Thus, we use them here as so.
+ */
+
+ /* Ensure breakpoint translation bit is set */
if (data && !(data & DABR_TRANSLATION))
return -EIO;
+ /* Move contents to the DABR register */
task->thread.dabr = data;
+
+#endif
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+
+ /* As described above, it was assumed 3 bits were passed with the data
+ * address, but we will assume only the mode bits will be passed
+ * as to not cause alignment restrictions for DAC-based processors.
+ */
+
+ /* DAC's hold the whole address without any mode flags */
+ task->thread.dabr = data & ~0x3UL;
+
+ if (task->thread.dabr == 0) {
+ task->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM);
+ task->thread.regs->msr &= ~MSR_DE;
+ return 0;
+ }
+
+ /* Read or Write bits must be set */
+
+ if (!(data & 0x3UL))
+ return -EINVAL;
+
+ /* Set the Internal Debugging flag (IDM bit 1) for the DBCR0
+ register */
+ task->thread.dbcr0 = DBCR0_IDM;
+
+ /* Check for write and read flags and set DBCR0
+ accordingly */
+ if (data & 0x1UL)
+ task->thread.dbcr0 |= DBSR_DAC1R;
+ if (data & 0x2UL)
+ task->thread.dbcr0 |= DBSR_DAC1W;
+
+ task->thread.regs->msr |= MSR_DE;
+#endif
return 0;
}
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index ad55488939c..7aada783ec6 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -145,8 +145,12 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
* user space. The DABR will have been cleared if it
* triggered inside the kernel.
*/
- if (current->thread.dabr)
+ if (current->thread.dabr) {
set_dabr(current->thread.dabr);
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+ mtspr(SPRN_DBCR0, current->thread.dbcr0);
+#endif
+ }
if (is32) {
if (ka.sa.sa_flags & SA_SIGINFO)
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 878fbddb6ae..81ccb8dd1a5 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1067,6 +1067,22 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
}
_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
+ } else if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) {
+ regs->msr &= ~MSR_DE;
+
+ if (user_mode(regs)) {
+ current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W |
+ DBCR0_IDM);
+ } else {
+ /* Disable DAC interupts */
+ mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R |
+ DBSR_DAC1W | DBCR0_IDM));
+
+ /* Clear the DAC event */
+ mtspr(SPRN_DBSR, (DBSR_DAC1R | DBSR_DAC1W));
+ }
+ /* Setup and send the trap to the handler */
+ do_dabr(regs, mfspr(SPRN_DAC1), debug_status);
}
}
#endif /* CONFIG_4xx || CONFIG_BOOKE */
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 1707d00331f..565b7a237c8 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -100,31 +100,6 @@ static int store_updates_sp(struct pt_regs *regs)
return 0;
}
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-static void do_dabr(struct pt_regs *regs, unsigned long address,
- unsigned long error_code)
-{
- siginfo_t info;
-
- if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
- 11, SIGSEGV) == NOTIFY_STOP)
- return;
-
- if (debugger_dabr_match(regs))
- return;
-
- /* Clear the DABR */
- set_dabr(0);
-
- /* Deliver the signal to userspace */
- info.si_signo = SIGTRAP;
- info.si_errno = 0;
- info.si_code = TRAP_HWBKPT;
- info.si_addr = (void __user *)address;
- force_sig_info(SIGTRAP, &info, current);
-}
-#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
-
/*
* For 600- and 800-family processors, the error_code parameter is DSISR
* for a data fault, SRR1 for an instruction fault. For 400-family processors
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
index e6e25e2364e..d6648c14332 100644
--- a/include/asm-powerpc/system.h
+++ b/include/asm-powerpc/system.h
@@ -110,6 +110,8 @@ static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
#endif
extern int set_dabr(unsigned long dabr);
+extern void do_dabr(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code);
extern void print_backtrace(unsigned long *);
extern void show_regs(struct pt_regs * regs);
extern void flush_instruction_cache(void);