aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS6
-rw-r--r--arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h50
-rw-r--r--arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h377
-rw-r--r--drivers/pci/pci.c5
-rw-r--r--drivers/staging/uc2322/aten2011.c4
-rw-r--r--drivers/usb/Kconfig1
-rw-r--r--drivers/usb/Makefile1
-rw-r--r--drivers/usb/class/cdc-acm.c71
-rw-r--r--drivers/usb/class/cdc-acm.h2
-rw-r--r--drivers/usb/class/usbtmc.c6
-rw-r--r--drivers/usb/core/Kconfig16
-rw-r--r--drivers/usb/core/Makefile4
-rw-r--r--drivers/usb/core/config.c192
-rw-r--r--drivers/usb/core/driver.c56
-rw-r--r--drivers/usb/core/endpoint.c160
-rw-r--r--drivers/usb/core/hcd-pci.c244
-rw-r--r--drivers/usb/core/hcd.c220
-rw-r--r--drivers/usb/core/hcd.h55
-rw-r--r--drivers/usb/core/hub.c134
-rw-r--r--drivers/usb/core/hub.h3
-rw-r--r--drivers/usb/core/message.c194
-rw-r--r--drivers/usb/core/sysfs.c12
-rw-r--r--drivers/usb/core/urb.c12
-rw-r--r--drivers/usb/core/usb.c76
-rw-r--r--drivers/usb/core/usb.h13
-rw-r--r--drivers/usb/gadget/Kconfig53
-rw-r--r--drivers/usb/gadget/Makefile8
-rw-r--r--drivers/usb/gadget/at91_udc.c4
-rw-r--r--drivers/usb/gadget/atmel_usba_udc.c20
-rw-r--r--drivers/usb/gadget/audio.c302
-rw-r--r--drivers/usb/gadget/ci13xxx_udc.c6
-rw-r--r--drivers/usb/gadget/f_audio.c707
-rw-r--r--drivers/usb/gadget/f_rndis.c4
-rw-r--r--drivers/usb/gadget/file_storage.c93
-rw-r--r--drivers/usb/gadget/fsl_mx3_udc.c95
-rw-r--r--drivers/usb/gadget/fsl_udc_core.c (renamed from drivers/usb/gadget/fsl_usb2_udc.c)69
-rw-r--r--drivers/usb/gadget/fsl_usb2_udc.h18
-rw-r--r--drivers/usb/gadget/gadget_chips.h8
-rw-r--r--drivers/usb/gadget/goku_udc.c6
-rw-r--r--drivers/usb/gadget/imx_udc.c14
-rw-r--r--drivers/usb/gadget/inode.c14
-rw-r--r--drivers/usb/gadget/langwell_udc.c3373
-rw-r--r--drivers/usb/gadget/langwell_udc.h228
-rw-r--r--drivers/usb/gadget/pxa27x_udc.c71
-rw-r--r--drivers/usb/gadget/pxa27x_udc.h2
-rw-r--r--drivers/usb/gadget/s3c-hsotg.c3269
-rw-r--r--drivers/usb/gadget/u_audio.c319
-rw-r--r--drivers/usb/gadget/u_audio.h56
-rw-r--r--drivers/usb/gadget/u_serial.c1
-rw-r--r--drivers/usb/host/Kconfig20
-rw-r--r--drivers/usb/host/Makefile2
-rw-r--r--drivers/usb/host/ehci-au1xxx.c1
-rw-r--r--drivers/usb/host/ehci-fsl.c1
-rw-r--r--drivers/usb/host/ehci-hcd.c47
-rw-r--r--drivers/usb/host/ehci-hub.c4
-rw-r--r--drivers/usb/host/ehci-ixp4xx.c1
-rw-r--r--drivers/usb/host/ehci-orion.c3
-rw-r--r--drivers/usb/host/ehci-pci.c27
-rw-r--r--drivers/usb/host/ehci-ppc-of.c1
-rw-r--r--drivers/usb/host/ehci-ps3.c1
-rw-r--r--drivers/usb/host/ehci-q.c19
-rw-r--r--drivers/usb/host/ehci-sched.c8
-rw-r--r--drivers/usb/host/ehci.h1
-rw-r--r--drivers/usb/host/fhci-dbg.c2
-rw-r--r--drivers/usb/host/hwa-hc.c21
-rw-r--r--drivers/usb/host/ohci-dbg.c31
-rw-r--r--drivers/usb/host/ohci-hcd.c38
-rw-r--r--drivers/usb/host/ohci-pci.c24
-rw-r--r--drivers/usb/host/pci-quirks.c123
-rw-r--r--drivers/usb/host/r8a66597-hcd.c62
-rw-r--r--drivers/usb/host/r8a66597.h38
-rw-r--r--drivers/usb/host/uhci-hcd.c23
-rw-r--r--drivers/usb/host/uhci-q.c2
-rw-r--r--drivers/usb/host/xhci-dbg.c485
-rw-r--r--drivers/usb/host/xhci-ext-caps.h145
-rw-r--r--drivers/usb/host/xhci-hcd.c1274
-rw-r--r--drivers/usb/host/xhci-hub.c308
-rw-r--r--drivers/usb/host/xhci-mem.c769
-rw-r--r--drivers/usb/host/xhci-pci.c166
-rw-r--r--drivers/usb/host/xhci-ring.c1648
-rw-r--r--drivers/usb/host/xhci.h1157
-rw-r--r--drivers/usb/misc/sisusbvga/Kconfig2
-rw-r--r--drivers/usb/misc/usbtest.c39
-rw-r--r--drivers/usb/mon/mon_text.c2
-rw-r--r--drivers/usb/musb/Kconfig2
-rw-r--r--drivers/usb/musb/blackfin.c11
-rw-r--r--drivers/usb/musb/cppi_dma.c34
-rw-r--r--drivers/usb/musb/cppi_dma.h6
-rw-r--r--drivers/usb/musb/davinci.c54
-rw-r--r--drivers/usb/musb/musb_core.c228
-rw-r--r--drivers/usb/musb/musb_core.h22
-rw-r--r--drivers/usb/musb/musb_gadget.c45
-rw-r--r--drivers/usb/musb/musb_gadget_ep0.c45
-rw-r--r--drivers/usb/musb/musb_host.c273
-rw-r--r--drivers/usb/musb/musb_host.h1
-rw-r--r--drivers/usb/musb/musb_virthub.c35
-rw-r--r--drivers/usb/musb/omap2430.c71
-rw-r--r--drivers/usb/musb/tusb6010.c70
-rw-r--r--drivers/usb/otg/Kconfig14
-rw-r--r--drivers/usb/otg/Makefile1
-rw-r--r--drivers/usb/otg/langwell_otg.c1915
-rw-r--r--drivers/usb/otg/nop-usb-xceiv.c25
-rw-r--r--drivers/usb/otg/twl4030-usb.c28
-rw-r--r--drivers/usb/serial/aircable.c5
-rw-r--r--drivers/usb/serial/belkin_sa.c7
-rw-r--r--drivers/usb/serial/bus.c27
-rw-r--r--drivers/usb/serial/cp210x.c6
-rw-r--r--drivers/usb/serial/cyberjack.c20
-rw-r--r--drivers/usb/serial/cypress_m8.c11
-rw-r--r--drivers/usb/serial/digi_acceleport.c20
-rw-r--r--drivers/usb/serial/empeg.c8
-rw-r--r--drivers/usb/serial/ftdi_sio.c179
-rw-r--r--drivers/usb/serial/ftdi_sio.h13
-rw-r--r--drivers/usb/serial/garmin_gps.c214
-rw-r--r--drivers/usb/serial/generic.c186
-rw-r--r--drivers/usb/serial/io_edgeport.c29
-rw-r--r--drivers/usb/serial/io_tables.h12
-rw-r--r--drivers/usb/serial/io_ti.c22
-rw-r--r--drivers/usb/serial/ipaq.c7
-rw-r--r--drivers/usb/serial/iuu_phoenix.c6
-rw-r--r--drivers/usb/serial/keyspan.c13
-rw-r--r--drivers/usb/serial/keyspan.h12
-rw-r--r--drivers/usb/serial/keyspan_pda.c4
-rw-r--r--drivers/usb/serial/kl5kusb105.c39
-rw-r--r--drivers/usb/serial/kobil_sct.c12
-rw-r--r--drivers/usb/serial/mct_u232.c13
-rw-r--r--drivers/usb/serial/mos7720.c9
-rw-r--r--drivers/usb/serial/mos7840.c358
-rw-r--r--drivers/usb/serial/omninet.c19
-rw-r--r--drivers/usb/serial/opticon.c14
-rw-r--r--drivers/usb/serial/option.c41
-rw-r--r--drivers/usb/serial/oti6858.c7
-rw-r--r--drivers/usb/serial/pl2303.c10
-rw-r--r--drivers/usb/serial/sierra.c185
-rw-r--r--drivers/usb/serial/spcp8x5.c5
-rw-r--r--drivers/usb/serial/symbolserial.c14
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c10
-rw-r--r--drivers/usb/serial/usb-serial.c53
-rw-r--r--drivers/usb/serial/usb_debug.c41
-rw-r--r--drivers/usb/serial/visor.c13
-rw-r--r--drivers/usb/serial/whiteheat.c6
-rw-r--r--drivers/usb/storage/initializers.c14
-rw-r--r--drivers/usb/storage/option_ms.c124
-rw-r--r--drivers/usb/storage/sierra_ms.c2
-rw-r--r--drivers/usb/storage/unusual_devs.h2
-rw-r--r--fs/befs/linuxvfs.c20
-rw-r--r--fs/fat/dir.c29
-rw-r--r--fs/fat/namei_vfat.c4
-rw-r--r--fs/isofs/joliet.c36
-rw-r--r--fs/ncpfs/ncplib_kernel.c8
-rw-r--r--fs/nls/nls_base.c166
-rw-r--r--fs/nls/nls_utf8.c13
-rw-r--r--include/linux/nls.h35
-rw-r--r--include/linux/pci.h8
-rw-r--r--include/linux/pci_ids.h1
-rw-r--r--include/linux/usb.h34
-rw-r--r--include/linux/usb/audio.h265
-rw-r--r--include/linux/usb/ch9.h17
-rw-r--r--include/linux/usb/composite.h3
-rw-r--r--include/linux/usb/langwell_otg.h177
-rw-r--r--include/linux/usb/langwell_udc.h310
-rw-r--r--include/linux/usb/otg.h4
-rw-r--r--include/linux/usb/r8a66597.h44
-rw-r--r--include/linux/usb/serial.h32
164 files changed, 20947 insertions, 2080 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 09f6b3e5708..685784cc023 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6165,6 +6165,12 @@ L: linux-wireless@vger.kernel.org
S: Maintained
F: drivers/net/wireless/rndis_wlan.c
+USB XHCI DRIVER
+P: Sarah Sharp
+M: sarah.a.sharp@intel.com
+L: linux-usb@vger.kernel.org
+S: Supported
+
USB ZC0301 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
new file mode 100644
index 00000000000..36a85f5000c
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
@@ -0,0 +1,50 @@
+/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - USB2.0 Highspeed/OtG device PHY registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Note, this is a seperate header file as some of the clock framework
+ * needs to touch this if the clk_48m is used as the USB OHCI or other
+ * peripheral source.
+*/
+
+#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H
+#define __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H __FILE__
+
+/* S3C64XX_PA_USB_HSPHY */
+
+#define S3C_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY)
+
+#define S3C_PHYPWR S3C_HSOTG_PHYREG(0x00)
+#define SRC_PHYPWR_OTG_DISABLE (1 << 4)
+#define SRC_PHYPWR_ANALOG_POWERDOWN (1 << 3)
+#define SRC_PHYPWR_FORCE_SUSPEND (1 << 1)
+
+#define S3C_PHYCLK S3C_HSOTG_PHYREG(0x04)
+#define S3C_PHYCLK_MODE_USB11 (1 << 6)
+#define S3C_PHYCLK_EXT_OSC (1 << 5)
+#define S3C_PHYCLK_CLK_FORCE (1 << 4)
+#define S3C_PHYCLK_ID_PULL (1 << 2)
+#define S3C_PHYCLK_CLKSEL_MASK (0x3 << 0)
+#define S3C_PHYCLK_CLKSEL_SHIFT (0)
+#define S3C_PHYCLK_CLKSEL_48M (0x0 << 0)
+#define S3C_PHYCLK_CLKSEL_12M (0x2 << 0)
+#define S3C_PHYCLK_CLKSEL_24M (0x3 << 0)
+
+#define S3C_RSTCON S3C_HSOTG_PHYREG(0x08)
+#define S3C_RSTCON_PHYCLK (1 << 2)
+#define S3C_RSTCON_HCLK (1 << 2)
+#define S3C_RSTCON_PHY (1 << 0)
+
+#define S3C_PHYTUNE S3C_HSOTG_PHYREG(0x20)
+
+#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
new file mode 100644
index 00000000000..8d18d9d4d14
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
@@ -0,0 +1,377 @@
+/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - USB2.0 Highspeed/OtG device block registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_H
+#define __PLAT_S3C64XX_REGS_USB_HSOTG_H __FILE__
+
+#define S3C_HSOTG_REG(x) (x)
+
+#define S3C_GOTGCTL S3C_HSOTG_REG(0x000)
+#define S3C_GOTGCTL_BSESVLD (1 << 19)
+#define S3C_GOTGCTL_ASESVLD (1 << 18)
+#define S3C_GOTGCTL_DBNC_SHORT (1 << 17)
+#define S3C_GOTGCTL_CONID_B (1 << 16)
+#define S3C_GOTGCTL_DEVHNPEN (1 << 11)
+#define S3C_GOTGCTL_HSSETHNPEN (1 << 10)
+#define S3C_GOTGCTL_HNPREQ (1 << 9)
+#define S3C_GOTGCTL_HSTNEGSCS (1 << 8)
+#define S3C_GOTGCTL_SESREQ (1 << 1)
+#define S3C_GOTGCTL_SESREQSCS (1 << 0)
+
+#define S3C_GOTGINT S3C_HSOTG_REG(0x004)
+#define S3C_GOTGINT_DbnceDone (1 << 19)
+#define S3C_GOTGINT_ADevTOUTChg (1 << 18)
+#define S3C_GOTGINT_HstNegDet (1 << 17)
+#define S3C_GOTGINT_HstnegSucStsChng (1 << 9)
+#define S3C_GOTGINT_SesReqSucStsChng (1 << 8)
+#define S3C_GOTGINT_SesEndDet (1 << 2)
+
+#define S3C_GAHBCFG S3C_HSOTG_REG(0x008)
+#define S3C_GAHBCFG_PTxFEmpLvl (1 << 8)
+#define S3C_GAHBCFG_NPTxFEmpLvl (1 << 7)
+#define S3C_GAHBCFG_DMAEn (1 << 5)
+#define S3C_GAHBCFG_HBstLen_MASK (0xf << 1)
+#define S3C_GAHBCFG_HBstLen_SHIFT (1)
+#define S3C_GAHBCFG_HBstLen_Single (0x0 << 1)
+#define S3C_GAHBCFG_HBstLen_Incr (0x1 << 1)
+#define S3C_GAHBCFG_HBstLen_Incr4 (0x3 << 1)
+#define S3C_GAHBCFG_HBstLen_Incr8 (0x5 << 1)
+#define S3C_GAHBCFG_HBstLen_Incr16 (0x7 << 1)
+#define S3C_GAHBCFG_GlblIntrEn (1 << 0)
+
+#define S3C_GUSBCFG S3C_HSOTG_REG(0x00C)
+#define S3C_GUSBCFG_PHYLPClkSel (1 << 15)
+#define S3C_GUSBCFG_HNPCap (1 << 9)
+#define S3C_GUSBCFG_SRPCap (1 << 8)
+#define S3C_GUSBCFG_PHYIf16 (1 << 3)
+#define S3C_GUSBCFG_TOutCal_MASK (0x7 << 0)
+#define S3C_GUSBCFG_TOutCal_SHIFT (0)
+#define S3C_GUSBCFG_TOutCal_LIMIT (0x7)
+#define S3C_GUSBCFG_TOutCal(_x) ((_x) << 0)
+
+#define S3C_GRSTCTL S3C_HSOTG_REG(0x010)
+
+#define S3C_GRSTCTL_AHBIdle (1 << 31)
+#define S3C_GRSTCTL_DMAReq (1 << 30)
+#define S3C_GRSTCTL_TxFNum_MASK (0x1f << 6)
+#define S3C_GRSTCTL_TxFNum_SHIFT (6)
+#define S3C_GRSTCTL_TxFNum_LIMIT (0x1f)
+#define S3C_GRSTCTL_TxFNum(_x) ((_x) << 6)
+#define S3C_GRSTCTL_TxFFlsh (1 << 5)
+#define S3C_GRSTCTL_RxFFlsh (1 << 4)
+#define S3C_GRSTCTL_INTknQFlsh (1 << 3)
+#define S3C_GRSTCTL_FrmCntrRst (1 << 2)
+#define S3C_GRSTCTL_HSftRst (1 << 1)
+#define S3C_GRSTCTL_CSftRst (1 << 0)
+
+#define S3C_GINTSTS S3C_HSOTG_REG(0x014)
+#define S3C_GINTMSK S3C_HSOTG_REG(0x018)
+
+#define S3C_GINTSTS_WkUpInt (1 << 31)
+#define S3C_GINTSTS_SessReqInt (1 << 30)
+#define S3C_GINTSTS_DisconnInt (1 << 29)
+#define S3C_GINTSTS_ConIDStsChng (1 << 28)
+#define S3C_GINTSTS_PTxFEmp (1 << 26)
+#define S3C_GINTSTS_HChInt (1 << 25)
+#define S3C_GINTSTS_PrtInt (1 << 24)
+#define S3C_GINTSTS_FetSusp (1 << 22)
+#define S3C_GINTSTS_incompIP (1 << 21)
+#define S3C_GINTSTS_IncomplSOIN (1 << 20)
+#define S3C_GINTSTS_OEPInt (1 << 19)
+#define S3C_GINTSTS_IEPInt (1 << 18)
+#define S3C_GINTSTS_EPMis (1 << 17)
+#define S3C_GINTSTS_EOPF (1 << 15)
+#define S3C_GINTSTS_ISOutDrop (1 << 14)
+#define S3C_GINTSTS_EnumDone (1 << 13)
+#define S3C_GINTSTS_USBRst (1 << 12)
+#define S3C_GINTSTS_USBSusp (1 << 11)
+#define S3C_GINTSTS_ErlySusp (1 << 10)
+#define S3C_GINTSTS_GOUTNakEff (1 << 7)
+#define S3C_GINTSTS_GINNakEff (1 << 6)
+#define S3C_GINTSTS_NPTxFEmp (1 << 5)
+#define S3C_GINTSTS_RxFLvl (1 << 4)
+#define S3C_GINTSTS_SOF (1 << 3)
+#define S3C_GINTSTS_OTGInt (1 << 2)
+#define S3C_GINTSTS_ModeMis (1 << 1)
+#define S3C_GINTSTS_CurMod_Host (1 << 0)
+
+#define S3C_GRXSTSR S3C_HSOTG_REG(0x01C)
+#define S3C_GRXSTSP S3C_HSOTG_REG(0x020)
+
+#define S3C_GRXSTS_FN_MASK (0x7f << 25)
+#define S3C_GRXSTS_FN_SHIFT (25)
+
+#define S3C_GRXSTS_PktSts_MASK (0xf << 17)
+#define S3C_GRXSTS_PktSts_SHIFT (17)
+#define S3C_GRXSTS_PktSts_GlobalOutNAK (0x1 << 17)
+#define S3C_GRXSTS_PktSts_OutRX (0x2 << 17)
+#define S3C_GRXSTS_PktSts_OutDone (0x3 << 17)
+#define S3C_GRXSTS_PktSts_SetupDone (0x4 << 17)
+#define S3C_GRXSTS_PktSts_SetupRX (0x6 << 17)
+
+#define S3C_GRXSTS_DPID_MASK (0x3 << 15)
+#define S3C_GRXSTS_DPID_SHIFT (15)
+#define S3C_GRXSTS_ByteCnt_MASK (0x7ff << 4)
+#define S3C_GRXSTS_ByteCnt_SHIFT (4)
+#define S3C_GRXSTS_EPNum_MASK (0xf << 0)
+#define S3C_GRXSTS_EPNum_SHIFT (0)
+
+#define S3C_GRXFSIZ S3C_HSOTG_REG(0x024)
+
+#define S3C_GNPTXFSIZ S3C_HSOTG_REG(0x028)
+
+#define S3C_GNPTXFSIZ_NPTxFDep_MASK (0xffff << 16)
+#define S3C_GNPTXFSIZ_NPTxFDep_SHIFT (16)
+#define S3C_GNPTXFSIZ_NPTxFDep_LIMIT (0xffff)
+#define S3C_GNPTXFSIZ_NPTxFDep(_x) ((_x) << 16)
+#define S3C_GNPTXFSIZ_NPTxFStAddr_MASK (0xffff << 0)
+#define S3C_GNPTXFSIZ_NPTxFStAddr_SHIFT (0)
+#define S3C_GNPTXFSIZ_NPTxFStAddr_LIMIT (0xffff)
+#define S3C_GNPTXFSIZ_NPTxFStAddr(_x) ((_x) << 0)
+
+#define S3C_GNPTXSTS S3C_HSOTG_REG(0x02C)
+
+#define S3C_GNPTXSTS_NPtxQTop_MASK (0x7f << 24)
+#define S3C_GNPTXSTS_NPtxQTop_SHIFT (24)
+
+#define S3C_GNPTXSTS_NPTxQSpcAvail_MASK (0xff << 16)
+#define S3C_GNPTXSTS_NPTxQSpcAvail_SHIFT (16)
+#define S3C_GNPTXSTS_NPTxQSpcAvail_GET(_v) (((_v) >> 16) & 0xff)
+
+#define S3C_GNPTXSTS_NPTxFSpcAvail_MASK (0xffff << 0)
+#define S3C_GNPTXSTS_NPTxFSpcAvail_SHIFT (0)
+#define S3C_GNPTXSTS_NPTxFSpcAvail_GET(_v) (((_v) >> 0) & 0xffff)
+
+
+#define S3C_HPTXFSIZ S3C_HSOTG_REG(0x100)
+
+#define S3C_DPTXFSIZn(_a) S3C_HSOTG_REG(0x104 + (((_a) - 1) * 4))
+
+#define S3C_DPTXFSIZn_DPTxFSize_MASK (0xffff << 16)
+#define S3C_DPTXFSIZn_DPTxFSize_SHIFT (16)
+#define S3C_DPTXFSIZn_DPTxFSize_GET(_v) (((_v) >> 16) & 0xffff)
+#define S3C_DPTXFSIZn_DPTxFSize_LIMIT (0xffff)
+#define S3C_DPTXFSIZn_DPTxFSize(_x) ((_x) << 16)
+
+#define S3C_DPTXFSIZn_DPTxFStAddr_MASK (0xffff << 0)
+#define S3C_DPTXFSIZn_DPTxFStAddr_SHIFT (0)
+
+/* Device mode registers */
+#define S3C_DCFG S3C_HSOTG_REG(0x800)
+
+#define S3C_DCFG_EPMisCnt_MASK (0x1f << 18)
+#define S3C_DCFG_EPMisCnt_SHIFT (18)
+#define S3C_DCFG_EPMisCnt_LIMIT (0x1f)
+#define S3C_DCFG_EPMisCnt(_x) ((_x) << 18)
+
+#define S3C_DCFG_PerFrInt_MASK (0x3 << 11)
+#define S3C_DCFG_PerFrInt_SHIFT (11)
+#define S3C_DCFG_PerFrInt_LIMIT (0x3)
+#define S3C_DCFG_PerFrInt(_x) ((_x) << 11)
+
+#define S3C_DCFG_DevAddr_MASK (0x7f << 4)
+#define S3C_DCFG_DevAddr_SHIFT (4)
+#define S3C_DCFG_DevAddr_LIMIT (0x7f)
+#define S3C_DCFG_DevAddr(_x) ((_x) << 4)
+
+#define S3C_DCFG_NZStsOUTHShk (1 << 2)
+
+#define S3C_DCFG_DevSpd_MASK (0x3 << 0)
+#define S3C_DCFG_DevSpd_SHIFT (0)
+#define S3C_DCFG_DevSpd_HS (0x0 << 0)
+#define S3C_DCFG_DevSpd_FS (0x1 << 0)
+#define S3C_DCFG_DevSpd_LS (0x2 << 0)
+#define S3C_DCFG_DevSpd_FS48 (0x3 << 0)
+
+#define S3C_DCTL S3C_HSOTG_REG(0x804)
+
+#define S3C_DCTL_PWROnPrgDone (1 << 11)
+#define S3C_DCTL_CGOUTNak (1 << 10)
+#define S3C_DCTL_SGOUTNak (1 << 9)
+#define S3C_DCTL_CGNPInNAK (1 << 8)
+#define S3C_DCTL_SGNPInNAK (1 << 7)
+#define S3C_DCTL_TstCtl_MASK (0x7 << 4)
+#define S3C_DCTL_TstCtl_SHIFT (4)
+#define S3C_DCTL_GOUTNakSts (1 << 3)
+#define S3C_DCTL_GNPINNakSts (1 << 2)
+#define S3C_DCTL_SftDiscon (1 << 1)
+#define S3C_DCTL_RmtWkUpSig (1 << 0)
+
+#define S3C_DSTS S3C_HSOTG_REG(0x808)
+
+#define S3C_DSTS_SOFFN_MASK (0x3fff << 8)
+#define S3C_DSTS_SOFFN_SHIFT (8)
+#define S3C_DSTS_SOFFN_LIMIT (0x3fff)
+#define S3C_DSTS_SOFFN(_x) ((_x) << 8)
+#define S3C_DSTS_ErraticErr (1 << 3)
+#define S3C_DSTS_EnumSpd_MASK (0x3 << 1)
+#define S3C_DSTS_EnumSpd_SHIFT (1)
+#define S3C_DSTS_EnumSpd_HS (0x0 << 1)
+#define S3C_DSTS_EnumSpd_FS (0x1 << 1)
+#define S3C_DSTS_EnumSpd_LS (0x2 << 1)
+#define S3C_DSTS_EnumSpd_FS48 (0x3 << 1)
+
+#define S3C_DSTS_SuspSts (1 << 0)
+
+#define S3C_DIEPMSK S3C_HSOTG_REG(0x810)
+
+#define S3C_DIEPMSK_INEPNakEffMsk (1 << 6)
+#define S3C_DIEPMSK_INTknEPMisMsk (1 << 5)
+#define S3C_DIEPMSK_INTknTXFEmpMsk (1 << 4)
+#define S3C_DIEPMSK_TimeOUTMsk (1 << 3)
+#define S3C_DIEPMSK_AHBErrMsk (1 << 2)
+#define S3C_DIEPMSK_EPDisbldMsk (1 << 1)
+#define S3C_DIEPMSK_XferComplMsk (1 << 0)
+
+#define S3C_DOEPMSK S3C_HSOTG_REG(0x814)
+
+#define S3C_DOEPMSK_Back2BackSetup (1 << 6)
+#define S3C_DOEPMSK_OUTTknEPdisMsk (1 << 4)
+#define S3C_DOEPMSK_SetupMsk (1 << 3)
+#define S3C_DOEPMSK_AHBErrMsk (1 << 2)
+#define S3C_DOEPMSK_EPDisbldMsk (1 << 1)
+#define S3C_DOEPMSK_XferComplMsk (1 << 0)
+
+#define S3C_DAINT S3C_HSOTG_REG(0x818)
+#define S3C_DAINTMSK S3C_HSOTG_REG(0x81C)
+
+#define S3C_DAINT_OutEP_SHIFT (16)
+#define S3C_DAINT_OutEP(x) (1 << ((x) + 16))
+#define S3C_DAINT_InEP(x) (1 << (x))
+
+#define S3C_DTKNQR1 S3C_HSOTG_REG(0x820)
+#define S3C_DTKNQR2 S3C_HSOTG_REG(0x824)
+#define S3C_DTKNQR3 S3C_HSOTG_REG(0x830)
+#define S3C_DTKNQR4 S3C_HSOTG_REG(0x834)
+
+#define S3C_DVBUSDIS S3C_HSOTG_REG(0x828)
+#define S3C_DVBUSPULSE S3C_HSOTG_REG(0x82C)
+
+#define S3C_DIEPCTL0 S3C_HSOTG_REG(0x900)
+#define S3C_DOEPCTL0 S3C_HSOTG_REG(0xB00)
+#define S3C_DIEPCTL(_a) S3C_HSOTG_REG(0x900 + ((_a) * 0x20))
+#define S3C_DOEPCTL(_a) S3C_HSOTG_REG(0xB00 + ((_a) * 0x20))
+
+/* EP0 specialness:
+ * bits[29..28] - reserved (no SetD0PID, SetD1PID)
+ * bits[25..22] - should always be zero, this isn't a periodic endpoint
+ * bits[10..0] - MPS setting differenct for EP0
+*/
+#define S3C_D0EPCTL_MPS_MASK (0x3 << 0)
+#define S3C_D0EPCTL_MPS_SHIFT (0)
+#define S3C_D0EPCTL_MPS_64 (0x0 << 0)
+#define S3C_D0EPCTL_MPS_32 (0x1 << 0)
+#define S3C_D0EPCTL_MPS_16 (0x2 << 0)
+#define S3C_D0EPCTL_MPS_8 (0x3 << 0)
+
+#define S3C_DxEPCTL_EPEna (1 << 31)
+#define S3C_DxEPCTL_EPDis (1 << 30)
+#define S3C_DxEPCTL_SetD1PID (1 << 29)
+#define S3C_DxEPCTL_SetOddFr (1 << 29)
+#define S3C_DxEPCTL_SetD0PID (1 << 28)
+#define S3C_DxEPCTL_SetEvenFr (1 << 28)
+#define S3C_DxEPCTL_SNAK (1 << 27)
+#define S3C_DxEPCTL_CNAK (1 << 26)
+#define S3C_DxEPCTL_TxFNum_MASK (0xf << 22)
+#define S3C_DxEPCTL_TxFNum_SHIFT (22)
+#define S3C_DxEPCTL_TxFNum_LIMIT (0xf)
+#define S3C_DxEPCTL_TxFNum(_x) ((_x) << 22)
+
+#define S3C_DxEPCTL_Stall (1 << 21)
+#define S3C_DxEPCTL_Snp (1 << 20)
+#define S3C_DxEPCTL_EPType_MASK (0x3 << 18)
+#define S3C_DxEPCTL_EPType_SHIFT (18)
+#define S3C_DxEPCTL_EPType_Control (0x0 << 18)
+#define S3C_DxEPCTL_EPType_Iso (0x1 << 18)
+#define S3C_DxEPCTL_EPType_Bulk (0x2 << 18)
+#define S3C_DxEPCTL_EPType_Intterupt (0x3 << 18)
+
+#define S3C_DxEPCTL_NAKsts (1 << 17)
+#define S3C_DxEPCTL_DPID (1 << 16)
+#define S3C_DxEPCTL_EOFrNum (1 << 16)
+#define S3C_DxEPCTL_USBActEp (1 << 15)
+#define S3C_DxEPCTL_NextEp_MASK (0xf << 11)
+#define S3C_DxEPCTL_NextEp_SHIFT (11)
+#define S3C_DxEPCTL_NextEp_LIMIT (0xf)
+#define S3C_DxEPCTL_NextEp(_x) ((_x) << 11)
+
+#define S3C_DxEPCTL_MPS_MASK (0x7ff << 0)
+#define S3C_DxEPCTL_MPS_SHIFT (0)
+#define S3C_DxEPCTL_MPS_LIMIT (0x7ff)
+#define S3C_DxEPCTL_MPS(_x) ((_x) << 0)
+
+#define S3C_DIEPINT(_a) S3C_HSOTG_REG(0x908 + ((_a) * 0x20))
+#define S3C_DOEPINT(_a) S3C_HSOTG_REG(0xB08 + ((_a) * 0x20))
+
+#define S3C_DxEPINT_INEPNakEff (1 << 6)
+#define S3C_DxEPINT_Back2BackSetup (1 << 6)
+#define S3C_DxEPINT_INTknEPMis (1 << 5)
+#define S3C_DxEPINT_INTknTXFEmp (1 << 4)
+#define S3C_DxEPINT_OUTTknEPdis (1 << 4)
+#define S3C_DxEPINT_Timeout (1 << 3)
+#define S3C_DxEPINT_Setup (1 << 3)
+#define S3C_DxEPINT_AHBErr (1 << 2)
+#define S3C_DxEPINT_EPDisbld (1 << 1)
+#define S3C_DxEPINT_XferCompl (1 << 0)
+
+#define S3C_DIEPTSIZ0 S3C_HSOTG_REG(0x910)
+
+#define S3C_DIEPTSIZ0_PktCnt_MASK (0x3 << 19)
+#define S3C_DIEPTSIZ0_PktCnt_SHIFT (19)
+#define S3C_DIEPTSIZ0_PktCnt_LIMIT (0x3)
+#define S3C_DIEPTSIZ0_PktCnt(_x) ((_x) << 19)
+
+#define S3C_DIEPTSIZ0_XferSize_MASK (0x7f << 0)
+#define S3C_DIEPTSIZ0_XferSize_SHIFT (0)
+#define S3C_DIEPTSIZ0_XferSize_LIMIT (0x7f)
+#define S3C_DIEPTSIZ0_XferSize(_x) ((_x) << 0)
+
+
+#define DOEPTSIZ0 S3C_HSOTG_REG(0xB10)
+#define S3C_DOEPTSIZ0_SUPCnt_MASK (0x3 << 29)
+#define S3C_DOEPTSIZ0_SUPCnt_SHIFT (29)
+#define S3C_DOEPTSIZ0_SUPCnt_LIMIT (0x3)
+#define S3C_DOEPTSIZ0_SUPCnt(_x) ((_x) << 29)
+
+#define S3C_DOEPTSIZ0_PktCnt (1 << 19)
+#define S3C_DOEPTSIZ0_XferSize_MASK (0x7f << 0)
+#define S3C_DOEPTSIZ0_XferSize_SHIFT (0)
+
+#define S3C_DIEPTSIZ(_a) S3C_HSOTG_REG(0x910 + ((_a) * 0x20))
+#define S3C_DOEPTSIZ(_a) S3C_HSOTG_REG(0xB10 + ((_a) * 0x20))
+
+#define S3C_DxEPTSIZ_MC_MASK (0x3 << 29)
+#define S3C_DxEPTSIZ_MC_SHIFT (29)
+#define S3C_DxEPTSIZ_MC_LIMIT (0x3)
+#define S3C_DxEPTSIZ_MC(_x) ((_x) << 29)
+
+#define S3C_DxEPTSIZ_PktCnt_MASK (0x3ff << 19)
+#define S3C_DxEPTSIZ_PktCnt_SHIFT (19)
+#define S3C_DxEPTSIZ_PktCnt_GET(_v) (((_v) >> 19) & 0x3ff)
+#define S3C_DxEPTSIZ_PktCnt_LIMIT (0x3ff)
+#define S3C_DxEPTSIZ_PktCnt(_x) ((_x) << 19)
+
+#define S3C_DxEPTSIZ_XferSize_MASK (0x7ffff << 0)
+#define S3C_DxEPTSIZ_XferSize_SHIFT (0)
+#define S3C_DxEPTSIZ_XferSize_GET(_v) (((_v) >> 0) & 0x7ffff)
+#define S3C_DxEPTSIZ_XferSize_LIMIT (0x7ffff)
+#define S3C_DxEPTSIZ_XferSize(_x) ((_x) << 0)
+
+
+#define S3C_DIEPDMA(_a) S3C_HSOTG_REG(0x914 + ((_a) * 0x20))
+#define S3C_DOEPDMA(_a) S3C_HSOTG_REG(0xB14 + ((_a) * 0x20))
+
+#define S3C_EPFIFO(_a) S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000))
+
+#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_H */
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 1a91bf9687a..07bbb9b3b93 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -24,6 +24,11 @@
#include <asm/setup.h>
#include "pci.h"
+const char *pci_power_names[] = {
+ "error", "D0", "D1", "D2", "D3hot", "D3cold", "unknown",
+};
+EXPORT_SYMBOL_GPL(pci_power_names);
+
unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT;
#ifdef CONFIG_PCI_DOMAINS
diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c
index 9c62f787cc9..39d0926d1a9 100644
--- a/drivers/staging/uc2322/aten2011.c
+++ b/drivers/staging/uc2322/aten2011.c
@@ -2336,7 +2336,7 @@ static int ATEN2011_startup(struct usb_serial *serial)
return 0;
}
-static void ATEN2011_shutdown(struct usb_serial *serial)
+static void ATEN2011_release(struct usb_serial *serial)
{
int i;
struct ATENINTL_port *ATEN2011_port;
@@ -2382,7 +2382,7 @@ static struct usb_serial_driver aten_serial_driver = {
.tiocmget = ATEN2011_tiocmget,
.tiocmset = ATEN2011_tiocmset,
.attach = ATEN2011_startup,
- .shutdown = ATEN2011_shutdown,
+ .release = ATEN2011_release,
.read_bulk_callback = ATEN2011_bulk_in_callback,
.read_int_callback = ATEN2011_interrupt_callback,
};
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 5eee3f82be5..dcd49f1e96d 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -64,6 +64,7 @@ config USB_ARCH_HAS_EHCI
config USB
tristate "Support for Host-side USB"
depends on USB_ARCH_HAS_HCD
+ select NLS # for UTF-8 strings
---help---
Universal Serial Bus (USB) is a specification for a serial bus
subsystem which offers higher speeds and more features than the
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 0a3dc5ece63..19cb7d5480d 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_USB_ISP116X_HCD) += host/
obj-$(CONFIG_USB_OHCI_HCD) += host/
obj-$(CONFIG_USB_UHCI_HCD) += host/
obj-$(CONFIG_USB_FHCI_HCD) += host/
+obj-$(CONFIG_USB_XHCI_HCD) += host/
obj-$(CONFIG_USB_SL811_HCD) += host/
obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_USB_R8A66597_HCD) += host/
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index ddeb6919253..38bfdb0f666 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -937,9 +937,9 @@ static int acm_probe(struct usb_interface *intf,
int buflen = intf->altsetting->extralen;
struct usb_interface *control_interface;
struct usb_interface *data_interface;
- struct usb_endpoint_descriptor *epctrl;
- struct usb_endpoint_descriptor *epread;
- struct usb_endpoint_descriptor *epwrite;
+ struct usb_endpoint_descriptor *epctrl = NULL;
+ struct usb_endpoint_descriptor *epread = NULL;
+ struct usb_endpoint_descriptor *epwrite = NULL;
struct usb_device *usb_dev = interface_to_usbdev(intf);
struct acm *acm;
int minor;
@@ -952,6 +952,7 @@ static int acm_probe(struct usb_interface *intf,
unsigned long quirks;
int num_rx_buf;
int i;
+ int combined_interfaces = 0;
/* normal quirks */
quirks = (unsigned long)id->driver_info;
@@ -1033,9 +1034,15 @@ next_desc:
data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
control_interface = intf;
} else {
- dev_dbg(&intf->dev,
- "No union descriptor, giving up\n");
- return -ENODEV;
+ if (intf->cur_altsetting->desc.bNumEndpoints != 3) {
+ dev_dbg(&intf->dev,"No union descriptor, giving up\n");
+ return -ENODEV;
+ } else {
+ dev_warn(&intf->dev,"No union descriptor, testing for castrated device\n");
+ combined_interfaces = 1;
+ control_interface = data_interface = intf;
+ goto look_for_collapsed_interface;
+ }
}
} else {
control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
@@ -1049,6 +1056,36 @@ next_desc:
if (data_interface_num != call_interface_num)
dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n");
+ if (control_interface == data_interface) {
+ /* some broken devices designed for windows work this way */
+ dev_warn(&intf->dev,"Control and data interfaces are not separated!\n");
+ combined_interfaces = 1;
+ /* a popular other OS doesn't use it */
+ quirks |= NO_CAP_LINE;
+ if (data_interface->cur_altsetting->desc.bNumEndpoints != 3) {
+ dev_err(&intf->dev, "This needs exactly 3 endpoints\n");
+ return -EINVAL;
+ }
+look_for_collapsed_interface:
+ for (i = 0; i < 3; i++) {
+ struct usb_endpoint_descriptor *ep;
+ ep = &data_interface->cur_altsetting->endpoint[i].desc;
+
+ if (usb_endpoint_is_int_in(ep))
+ epctrl = ep;
+ else if (usb_endpoint_is_bulk_out(ep))
+ epwrite = ep;
+ else if (usb_endpoint_is_bulk_in(ep))
+ epread = ep;
+ else
+ return -EINVAL;
+ }
+ if (!epctrl || !epread || !epwrite)
+ return -ENODEV;
+ else
+ goto made_compressed_probe;
+ }
+
skip_normal_probe:
/*workaround for switched interfaces */
@@ -1068,10 +1105,11 @@ skip_normal_probe:
}
/* Accept probe requests only for the control interface */
- if (intf != control_interface)
+ if (!combined_interfaces && intf != control_interface)
return -ENODEV;
- if (usb_interface_claimed(data_interface)) { /* valid in this context */
+ if (!combined_interfaces && usb_interface_claimed(data_interface)) {
+ /* valid in this context */
dev_dbg(&intf->dev, "The data interface isn't available\n");
return -EBUSY;
}
@@ -1095,6 +1133,7 @@ skip_normal_probe:
epread = epwrite;
epwrite = t;
}
+made_compressed_probe:
dbg("interfaces are valid");
for (minor = 0; minor < ACM_TTY_MINORS && acm_table[minor]; minor++);
@@ -1112,12 +1151,15 @@ skip_normal_probe:
ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize);
readsize = le16_to_cpu(epread->wMaxPacketSize) *
(quirks == SINGLE_RX_URB ? 1 : 2);
+ acm->combined_interfaces = combined_interfaces;
acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize) * 20;
acm->control = control_interface;
acm->data = data_interface;
acm->minor = minor;
acm->dev = usb_dev;
acm->ctrl_caps = ac_management_function;
+ if (quirks & NO_CAP_LINE)
+ acm->ctrl_caps &= ~USB_CDC_CAP_LINE;
acm->ctrlsize = ctrlsize;
acm->readsize = readsize;
acm->rx_buflimit = num_rx_buf;
@@ -1223,9 +1265,10 @@ skip_normal_probe:
skip_countries:
usb_fill_int_urb(acm->ctrlurb, usb_dev,
- usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
- acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm,
- epctrl->bInterval);
+ usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
+ acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm,
+ /* works around buggy devices */
+ epctrl->bInterval ? epctrl->bInterval : 0xff);
acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
acm->ctrlurb->transfer_dma = acm->ctrl_dma;
@@ -1312,7 +1355,8 @@ static void acm_disconnect(struct usb_interface *intf)
acm->ctrl_dma);
acm_read_buffers_free(acm);
- usb_driver_release_interface(&acm_driver, intf == acm->control ?
+ if (!acm->combined_interfaces)
+ usb_driver_release_interface(&acm_driver, intf == acm->control ?
acm->data : acm->control);
if (acm->port.count == 0) {
@@ -1451,6 +1495,9 @@ static struct usb_device_id acm_ids[] = {
Maybe we should define a new
quirk for this. */
},
+ { USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */
+ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+ },
/* control interfaces with various AT-command sets */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 4c3856420ad..1602324808b 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -125,6 +125,7 @@ struct acm {
unsigned char clocal; /* termios CLOCAL */
unsigned int ctrl_caps; /* control capabilities from the class specific header */
unsigned int susp_count; /* number of suspended interfaces */
+ int combined_interfaces:1; /* control and data collapsed */
struct acm_wb *delayed_wb; /* write queued for a device about to be woken */
};
@@ -133,3 +134,4 @@ struct acm {
/* constants describing various quirks and errors */
#define NO_UNION_NORMAL 1
#define SINGLE_RX_URB 2
+#define NO_CAP_LINE 4
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index c40a9b284cc..3703789d0d2 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -927,21 +927,27 @@ static long usbtmc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
switch (cmd) {
case USBTMC_IOCTL_CLEAR_OUT_HALT:
retval = usbtmc_ioctl_clear_out_halt(data);
+ break;
case USBTMC_IOCTL_CLEAR_IN_HALT:
retval = usbtmc_ioctl_clear_in_halt(data);
+ break;
case USBTMC_IOCTL_INDICATOR_PULSE:
retval = usbtmc_ioctl_indicator_pulse(data);
+ break;
case USBTMC_IOCTL_CLEAR:
retval = usbtmc_ioctl_clear(data);
+ break;
case USBTMC_IOCTL_ABORT_BULK_OUT:
retval = usbtmc_ioctl_abort_bulk_out(data);
+ break;
case USBTMC_IOCTL_ABORT_BULK_IN:
retval = usbtmc_ioctl_abort_bulk_in(data);
+ break;
}
mutex_unlock(&data->io_mutex);
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index e1759d17ac5..69280c35b5c 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -28,7 +28,7 @@ comment "Miscellaneous USB options"
depends on USB
config USB_DEVICEFS
- bool "USB device filesystem"
+ bool "USB device filesystem (DEPRECATED)" if EMBEDDED
depends on USB
---help---
If you say Y here (and to "/proc file system support" in the "File
@@ -46,11 +46,15 @@ config USB_DEVICEFS
For the format of the various /proc/bus/usb/ files, please read
<file:Documentation/usb/proc_usb_info.txt>.
- Usbfs files can't handle Access Control Lists (ACL), which are the
- default way to grant access to USB devices for untrusted users of a
- desktop system. The usbfs functionality is replaced by real
- device-nodes managed by udev. These nodes live in /dev/bus/usb and
- are used by libusb.
+ Modern Linux systems do not use this.
+
+ Usbfs entries are files and not character devices; usbfs can't
+ handle Access Control Lists (ACL) which are the default way to
+ grant access to USB devices for untrusted users of a desktop
+ system.
+
+ The usbfs functionality is replaced by real device-nodes managed by
+ udev. These nodes lived in /dev/bus/usb and are used by libusb.
config USB_DEVICE_CLASS
bool "USB device class-devices (DEPRECATED)"
diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile
index b6078706fb9..ec16e602990 100644
--- a/drivers/usb/core/Makefile
+++ b/drivers/usb/core/Makefile
@@ -4,14 +4,14 @@
usbcore-objs := usb.o hub.o hcd.o urb.o message.o driver.o \
config.o file.o buffer.o sysfs.o endpoint.o \
- devio.o notify.o generic.o quirks.o
+ devio.o notify.o generic.o quirks.o devices.o
ifeq ($(CONFIG_PCI),y)
usbcore-objs += hcd-pci.o
endif
ifeq ($(CONFIG_USB_DEVICEFS),y)
- usbcore-objs += inode.o devices.o
+ usbcore-objs += inode.o
endif
obj-$(CONFIG_USB) += usbcore.o
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 568244c99bd..24dfb33f90c 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -19,6 +19,32 @@ static inline const char *plural(int n)
return (n == 1 ? "" : "s");
}
+/* FIXME: this is a kludge */
+static int find_next_descriptor_more(unsigned char *buffer, int size,
+ int dt1, int dt2, int dt3, int *num_skipped)
+{
+ struct usb_descriptor_header *h;
+ int n = 0;
+ unsigned char *buffer0 = buffer;
+
+ /* Find the next descriptor of type dt1 or dt2 or dt3 */
+ while (size > 0) {
+ h = (struct usb_descriptor_header *) buffer;
+ if (h->bDescriptorType == dt1 || h->bDescriptorType == dt2 ||
+ h->bDescriptorType == dt3)
+ break;
+ buffer += h->bLength;
+ size -= h->bLength;
+ ++n;
+ }
+
+ /* Store the number of descriptors skipped and return the
+ * number of bytes skipped */
+ if (num_skipped)
+ *num_skipped = n;
+ return buffer - buffer0;
+}
+
static int find_next_descriptor(unsigned char *buffer, int size,
int dt1, int dt2, int *num_skipped)
{
@@ -43,6 +69,129 @@ static int find_next_descriptor(unsigned char *buffer, int size,
return buffer - buffer0;
}
+static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
+ int inum, int asnum, struct usb_host_endpoint *ep,
+ int num_ep, unsigned char *buffer, int size)
+{
+ unsigned char *buffer_start = buffer;
+ struct usb_ss_ep_comp_descriptor *desc;
+ int retval;
+ int num_skipped;
+ int max_tx;
+ int i;
+
+ /* Allocate space for the SS endpoint companion descriptor */
+ ep->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
+ GFP_KERNEL);
+ if (!ep->ss_ep_comp)
+ return -ENOMEM;
+ desc = (struct usb_ss_ep_comp_descriptor *) buffer;
+ if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP) {
+ dev_warn(ddev, "No SuperSpeed endpoint companion for config %d "
+ " interface %d altsetting %d ep %d: "
+ "using minimum values\n",
+ cfgno, inum, asnum, ep->desc.bEndpointAddress);
+ ep->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
+ ep->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
+ ep->ss_ep_comp->desc.bMaxBurst = 0;
+ /*
+ * Leave bmAttributes as zero, which will mean no streams for
+ * bulk, and isoc won't support multiple bursts of packets.
+ * With bursts of only one packet, and a Mult of 1, the max
+ * amount of data moved per endpoint service interval is one
+ * packet.
+ */
+ if (usb_endpoint_xfer_isoc(&ep->desc) ||
+ usb_endpoint_xfer_int(&ep->desc))
+ ep->ss_ep_comp->desc.wBytesPerInterval =
+ ep->desc.wMaxPacketSize;
+ /*
+ * The next descriptor is for an Endpoint or Interface,
+ * no extra descriptors to copy into the companion structure,
+ * and we didn't eat up any of the buffer.
+ */
+ retval = 0;
+ goto valid;
+ }
+ memcpy(&ep->ss_ep_comp->desc, desc, USB_DT_SS_EP_COMP_SIZE);
+ desc = &ep->ss_ep_comp->desc;
+ buffer += desc->bLength;
+ size -= desc->bLength;
+
+ /* Eat up the other descriptors we don't care about */
+ ep->ss_ep_comp->extra = buffer;
+ i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
+ USB_DT_INTERFACE, &num_skipped);
+ ep->ss_ep_comp->extralen = i;
+ buffer += i;
+ size -= i;
+ retval = buffer - buffer_start + i;
+ if (num_skipped > 0)
+ dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
+ num_skipped, plural(num_skipped),
+ "SuperSpeed endpoint companion");
+
+ /* Check the various values */
+ if (usb_endpoint_xfer_control(&ep->desc) && desc->bMaxBurst != 0) {
+ dev_warn(ddev, "Control endpoint with bMaxBurst = %d in "
+ "config %d interface %d altsetting %d ep %d: "
+ "setting to zero\n", desc->bMaxBurst,
+ cfgno, inum, asnum, ep->desc.bEndpointAddress);
+ desc->bMaxBurst = 0;
+ }
+ if (desc->bMaxBurst > 15) {
+ dev_warn(ddev, "Endpoint with bMaxBurst = %d in "
+ "config %d interface %d altsetting %d ep %d: "
+ "setting to 15\n", desc->bMaxBurst,
+ cfgno, inum, asnum, ep->desc.bEndpointAddress);
+ desc->bMaxBurst = 15;
+ }
+ if ((usb_endpoint_xfer_control(&ep->desc) || usb_endpoint_xfer_int(&ep->desc))
+ && desc->bmAttributes != 0) {
+ dev_warn(ddev, "%s endpoint with bmAttributes = %d in "
+ "config %d interface %d altsetting %d ep %d: "
+ "setting to zero\n",
+ usb_endpoint_xfer_control(&ep->desc) ? "Control" : "Bulk",
+ desc->bmAttributes,
+ cfgno, inum, asnum, ep->desc.bEndpointAddress);
+ desc->bmAttributes = 0;
+ }
+ if (usb_endpoint_xfer_bulk(&ep->desc) && desc->bmAttributes > 16) {
+ dev_warn(ddev, "Bulk endpoint with more than 65536 streams in "
+ "config %d interface %d altsetting %d ep %d: "
+ "setting to max\n",
+ cfgno, inum, asnum, ep->desc.bEndpointAddress);
+ desc->bmAttributes = 16;
+ }
+ if (usb_endpoint_xfer_isoc(&ep->desc) && desc->bmAttributes > 2) {
+ dev_warn(ddev, "Isoc endpoint has Mult of %d in "
+ "config %d interface %d altsetting %d ep %d: "
+ "setting to 3\n", desc->bmAttributes + 1,
+ cfgno, inum, asnum, ep->desc.bEndpointAddress);
+ desc->bmAttributes = 2;
+ }
+ if (usb_endpoint_xfer_isoc(&ep->desc)) {
+ max_tx = ep->desc.wMaxPacketSize * (desc->bMaxBurst + 1) *
+ (desc->bmAttributes + 1);
+ } else if (usb_endpoint_xfer_int(&ep->desc)) {
+ max_tx = ep->desc.wMaxPacketSize * (desc->bMaxBurst + 1);
+ } else {
+ goto valid;
+ }
+ if (desc->wBytesPerInterval > max_tx) {
+ dev_warn(ddev, "%s endpoint with wBytesPerInterval of %d in "
+ "config %d interface %d altsetting %d ep %d: "
+ "setting to %d\n",
+ usb_endpoint_xfer_isoc(&ep->desc) ? "Isoc" : "Int",
+ desc->wBytesPerInterval,
+ cfgno, inum, asnum, ep->desc.bEndpointAddress,
+ max_tx);
+ desc->wBytesPerInterval = max_tx;
+ }
+valid:
+ return retval;
+}
+
static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
int asnum, struct usb_host_interface *ifp, int num_ep,
unsigned char *buffer, int size)
@@ -50,7 +199,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
unsigned char *buffer0 = buffer;
struct usb_endpoint_descriptor *d;
struct usb_host_endpoint *endpoint;
- int n, i, j;
+ int n, i, j, retval;
d = (struct usb_endpoint_descriptor *) buffer;
buffer += d->bLength;
@@ -92,6 +241,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
if (usb_endpoint_xfer_int(d)) {
i = 1;
switch (to_usb_device(ddev)->speed) {
+ case USB_SPEED_SUPER:
case USB_SPEED_HIGH:
/* Many device manufacturers are using full-speed
* bInterval values in high-speed interrupt endpoint
@@ -161,17 +311,39 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
cfgno, inum, asnum, d->bEndpointAddress,
maxp);
}
-
- /* Skip over any Class Specific or Vendor Specific descriptors;
- * find the next endpoint or interface descriptor */
- endpoint->extra = buffer;
- i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
- USB_DT_INTERFACE, &n);
- endpoint->extralen = i;
+ /* Allocate room for and parse any SS endpoint companion descriptors */
+ if (to_usb_device(ddev)->speed == USB_SPEED_SUPER) {
+ endpoint->extra = buffer;
+ i = find_next_descriptor_more(buffer, size, USB_DT_SS_ENDPOINT_COMP,
+ USB_DT_ENDPOINT, USB_DT_INTERFACE, &n);
+ endpoint->extralen = i;
+ buffer += i;
+ size -= i;
+
+ if (size > 0) {
+ retval = usb_parse_ss_endpoint_companion(ddev, cfgno,
+ inum, asnum, endpoint, num_ep, buffer,
+ size);
+ if (retval >= 0) {
+ buffer += retval;
+ retval = buffer - buffer0;
+ }
+ } else {
+ retval = buffer - buffer0;
+ }
+ } else {
+ /* Skip over any Class Specific or Vendor Specific descriptors;
+ * find the next endpoint or interface descriptor */
+ endpoint->extra = buffer;
+ i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
+ USB_DT_INTERFACE, &n);
+ endpoint->extralen = i;
+ retval = buffer - buffer0 + i;
+ }
if (n > 0)
dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
n, plural(n), "endpoint");
- return buffer - buffer0 + i;
+ return retval;
skip_to_next_endpoint_or_interface_descriptor:
i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
@@ -452,6 +624,8 @@ static int usb_parse_configuration(struct device *ddev, int cfgidx,
kref_init(&intfc->ref);
}
+ /* FIXME: parse the BOS descriptor */
+
/* Skip over any Class Specific or Vendor Specific descriptors;
* find the first interface descriptor */
config->extra = buffer;
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index d0a21a5f820..69e5773abfc 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -154,16 +154,11 @@ static const struct usb_device_id *usb_match_dynamic_id(struct usb_interface *in
static int usb_probe_device(struct device *dev)
{
struct usb_device_driver *udriver = to_usb_device_driver(dev->driver);
- struct usb_device *udev;
+ struct usb_device *udev = to_usb_device(dev);
int error = -ENODEV;
dev_dbg(dev, "%s\n", __func__);
- if (!is_usb_device(dev)) /* Sanity check */
- return error;
-
- udev = to_usb_device(dev);
-
/* TODO: Add real matching code */
/* The device should always appear to be in use
@@ -203,18 +198,13 @@ static void usb_cancel_queued_reset(struct usb_interface *iface)
static int usb_probe_interface(struct device *dev)
{
struct usb_driver *driver = to_usb_driver(dev->driver);
- struct usb_interface *intf;
- struct usb_device *udev;
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct usb_device *udev = interface_to_usbdev(intf);
const struct usb_device_id *id;
int error = -ENODEV;
dev_dbg(dev, "%s\n", __func__);
- if (is_usb_device(dev)) /* Sanity check */
- return error;
-
- intf = to_usb_interface(dev);
- udev = interface_to_usbdev(intf);
intf->needs_binding = 0;
if (udev->authorized == 0) {
@@ -385,7 +375,6 @@ void usb_driver_release_interface(struct usb_driver *driver,
struct usb_interface *iface)
{
struct device *dev = &iface->dev;
- struct usb_device *udev = interface_to_usbdev(iface);
/* this should never happen, don't release something that's not ours */
if (!dev->driver || dev->driver != &driver->drvwrap.driver)
@@ -394,23 +383,19 @@ void usb_driver_release_interface(struct usb_driver *driver,
/* don't release from within disconnect() */
if (iface->condition != USB_INTERFACE_BOUND)
return;
+ iface->condition = USB_INTERFACE_UNBINDING;
- /* don't release if the interface hasn't been added yet */
+ /* Release via the driver core only if the interface
+ * has already been registered
+ */
if (device_is_registered(dev)) {
- iface->condition = USB_INTERFACE_UNBINDING;
device_release_driver(dev);
} else {
- iface->condition = USB_INTERFACE_UNBOUND;
- usb_cancel_queued_reset(iface);
+ down(&dev->sem);
+ usb_unbind_interface(dev);
+ dev->driver = NULL;
+ up(&dev->sem);
}
- dev->driver = NULL;
- usb_set_intfdata(iface, NULL);
-
- usb_pm_lock(udev);
- iface->condition = USB_INTERFACE_UNBOUND;
- mark_quiesced(iface);
- iface->needs_remote_wakeup = 0;
- usb_pm_unlock(udev);
}
EXPORT_SYMBOL_GPL(usb_driver_release_interface);
@@ -598,7 +583,7 @@ static int usb_device_match(struct device *dev, struct device_driver *drv)
/* TODO: Add real matching code */
return 1;
- } else {
+ } else if (is_usb_interface(dev)) {
struct usb_interface *intf;
struct usb_driver *usb_drv;
const struct usb_device_id *id;
@@ -630,11 +615,14 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
/* driver is often null here; dev_dbg() would oops */
pr_debug("usb %s: uevent\n", dev_name(dev));
- if (is_usb_device(dev))
+ if (is_usb_device(dev)) {
usb_dev = to_usb_device(dev);
- else {
+ } else if (is_usb_interface(dev)) {
struct usb_interface *intf = to_usb_interface(dev);
+
usb_dev = interface_to_usbdev(intf);
+ } else {
+ return 0;
}
if (usb_dev->devnum < 0) {
@@ -1762,6 +1750,7 @@ int usb_suspend(struct device *dev, pm_message_t msg)
int usb_resume(struct device *dev, pm_message_t msg)
{
struct usb_device *udev;
+ int status;
udev = to_usb_device(dev);
@@ -1771,7 +1760,14 @@ int usb_resume(struct device *dev, pm_message_t msg)
*/
if (udev->skip_sys_resume)
return 0;
- return usb_external_resume_device(udev, msg);
+ status = usb_external_resume_device(udev, msg);
+
+ /* Avoid PM error messages for devices disconnected while suspended
+ * as we'll display regular disconnect messages just a bit later.
+ */
+ if (status == -ENODEV)
+ return 0;
+ return status;
}
#endif /* CONFIG_PM */
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index 40dee2ac013..bc39fc40bbd 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -15,19 +15,18 @@
#include <linux/usb.h>
#include "usb.h"
-#define MAX_ENDPOINT_MINORS (64*128*32)
-static int usb_endpoint_major;
-static DEFINE_IDR(endpoint_idr);
-
struct ep_device {
struct usb_endpoint_descriptor *desc;
struct usb_device *udev;
struct device dev;
- int minor;
};
#define to_ep_device(_dev) \
container_of(_dev, struct ep_device, dev)
+struct device_type usb_ep_device_type = {
+ .name = "usb_endpoint",
+};
+
struct ep_attribute {
struct attribute attr;
ssize_t (*show)(struct usb_device *,
@@ -160,118 +159,10 @@ static struct attribute_group *ep_dev_groups[] = {
NULL
};
-static int usb_endpoint_major_init(void)
-{
- dev_t dev;
- int error;
-
- error = alloc_chrdev_region(&dev, 0, MAX_ENDPOINT_MINORS,
- "usb_endpoint");
- if (error) {
- printk(KERN_ERR "Unable to get a dynamic major for "
- "usb endpoints.\n");
- return error;
- }
- usb_endpoint_major = MAJOR(dev);
-
- return error;
-}
-
-static void usb_endpoint_major_cleanup(void)
-{
- unregister_chrdev_region(MKDEV(usb_endpoint_major, 0),
- MAX_ENDPOINT_MINORS);
-}
-
-static int endpoint_get_minor(struct ep_device *ep_dev)
-{
- static DEFINE_MUTEX(minor_lock);
- int retval = -ENOMEM;
- int id;
-
- mutex_lock(&minor_lock);
- if (idr_pre_get(&endpoint_idr, GFP_KERNEL) == 0)
- goto exit;
-
- retval = idr_get_new(&endpoint_idr, ep_dev, &id);
- if (retval < 0) {
- if (retval == -EAGAIN)
- retval = -ENOMEM;
- goto exit;
- }
- ep_dev->minor = id & MAX_ID_MASK;
-exit:
- mutex_unlock(&minor_lock);
- return retval;
-}
-
-static void endpoint_free_minor(struct ep_device *ep_dev)
-{
- idr_remove(&endpoint_idr, ep_dev->minor);
-}
-
-static struct endpoint_class {
- struct kref kref;
- struct class *class;
-} *ep_class;
-
-static int init_endpoint_class(void)
-{
- int result = 0;
-
- if (ep_class != NULL) {
- kref_get(&ep_class->kref);
- goto exit;
- }
-
- ep_class = kmalloc(sizeof(*ep_class), GFP_KERNEL);
- if (!ep_class) {
- result = -ENOMEM;
- goto exit;
- }
-
- kref_init(&ep_class->kref);
- ep_class->class = class_create(THIS_MODULE, "usb_endpoint");
- if (IS_ERR(ep_class->class)) {
- result = PTR_ERR(ep_class->class);
- goto class_create_error;
- }
-
- result = usb_endpoint_major_init();
- if (result)
- goto endpoint_major_error;
-
- goto exit;
-
-endpoint_major_error:
- class_destroy(ep_class->class);
-class_create_error:
- kfree(ep_class);
- ep_class = NULL;
-exit:
- return result;
-}
-
-static void release_endpoint_class(struct kref *kref)
-{
- /* Ok, we cheat as we know we only have one ep_class */
- class_destroy(ep_class->class);
- kfree(ep_class);
- ep_class = NULL;
- usb_endpoint_major_cleanup();
-}
-
-static void destroy_endpoint_class(void)
-{
- if (ep_class)
- kref_put(&ep_class->kref, release_endpoint_class);
-}
-
static void ep_device_release(struct device *dev)
{
struct ep_device *ep_dev = to_ep_device(dev);
- endpoint_free_minor(ep_dev);
kfree(ep_dev);
}
@@ -279,62 +170,32 @@ int usb_create_ep_devs(struct device *parent,
struct usb_host_endpoint *endpoint,
struct usb_device *udev)
{
- char name[8];
struct ep_device *ep_dev;
int retval;
- retval = init_endpoint_class();
- if (retval)
- goto exit;
-
ep_dev = kzalloc(sizeof(*ep_dev), GFP_KERNEL);
if (!ep_dev) {
retval = -ENOMEM;
- goto error_alloc;
- }
-
- retval = endpoint_get_minor(ep_dev);
- if (retval) {
- dev_err(parent, "can not allocate minor number for %s\n",
- dev_name(&ep_dev->dev));
- goto error_register;
+ goto exit;
}
ep_dev->desc = &endpoint->desc;
ep_dev->udev = udev;
ep_dev->dev.groups = ep_dev_groups;
- ep_dev->dev.devt = MKDEV(usb_endpoint_major, ep_dev->minor);
- ep_dev->dev.class = ep_class->class;
+ ep_dev->dev.type = &usb_ep_device_type;
ep_dev->dev.parent = parent;
ep_dev->dev.release = ep_device_release;
- dev_set_name(&ep_dev->dev, "usbdev%d.%d_ep%02x",
- udev->bus->busnum, udev->devnum,
- endpoint->desc.bEndpointAddress);
+ dev_set_name(&ep_dev->dev, "ep_%02x", endpoint->desc.bEndpointAddress);
retval = device_register(&ep_dev->dev);
if (retval)
- goto error_chrdev;
+ goto error_register;
- /* create the symlink to the old-style "ep_XX" directory */
- sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress);
- retval = sysfs_create_link(&parent->kobj, &ep_dev->dev.kobj, name);
- if (retval)
- goto error_link;
endpoint->ep_dev = ep_dev;
return retval;
-error_link:
- device_unregister(&ep_dev->dev);
- destroy_endpoint_class();
- return retval;
-
-error_chrdev:
- endpoint_free_minor(ep_dev);
-
error_register:
kfree(ep_dev);
-error_alloc:
- destroy_endpoint_class();
exit:
return retval;
}
@@ -344,12 +205,7 @@ void usb_remove_ep_devs(struct usb_host_endpoint *endpoint)
struct ep_device *ep_dev = endpoint->ep_dev;
if (ep_dev) {
- char name[8];
-
- sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress);
- sysfs_remove_link(&ep_dev->dev.parent->kobj, name);
device_unregister(&ep_dev->dev);
endpoint->ep_dev = NULL;
- destroy_endpoint_class();
}
}
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index a4301dc02d2..91f2885b6ee 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -185,194 +185,198 @@ void usb_hcd_pci_remove(struct pci_dev *dev)
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
-
-#ifdef CONFIG_PM
-
/**
- * usb_hcd_pci_suspend - power management suspend of a PCI-based HCD
- * @dev: USB Host Controller being suspended
- * @message: Power Management message describing this state transition
- *
- * Store this function in the HCD's struct pci_driver as .suspend.
+ * usb_hcd_pci_shutdown - shutdown host controller
+ * @dev: USB Host Controller being shutdown
*/
-int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
+void usb_hcd_pci_shutdown(struct pci_dev *dev)
+{
+ struct usb_hcd *hcd;
+
+ hcd = pci_get_drvdata(dev);
+ if (!hcd)
+ return;
+
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
+
+#ifdef CONFIG_PM_SLEEP
+
+static int check_root_hub_suspended(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
+
+ if (!(hcd->state == HC_STATE_SUSPENDED ||
+ hcd->state == HC_STATE_HALT)) {
+ dev_warn(dev, "Root hub is not suspended\n");
+ return -EBUSY;
+ }
+ return 0;
+}
+
+static int hcd_pci_suspend(struct device *dev)
{
- struct usb_hcd *hcd = pci_get_drvdata(dev);
- int retval = 0;
- int wake, w;
- int has_pci_pm;
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
+ int retval;
/* Root hub suspend should have stopped all downstream traffic,
* and all bus master traffic. And done so for both the interface
* and the stub usb_device (which we check here). But maybe it
* didn't; writing sysfs power/state files ignores such rules...
- *
- * We must ignore the FREEZE vs SUSPEND distinction here, because
- * otherwise the swsusp will save (and restore) garbage state.
*/
- if (!(hcd->state == HC_STATE_SUSPENDED ||
- hcd->state == HC_STATE_HALT)) {
- dev_warn(&dev->dev, "Root hub is not suspended\n");
- retval = -EBUSY;
- goto done;
- }
+ retval = check_root_hub_suspended(dev);
+ if (retval)
+ return retval;
/* We might already be suspended (runtime PM -- not yet written) */
- if (dev->current_state != PCI_D0)
- goto done;
+ if (pci_dev->current_state != PCI_D0)
+ return retval;
if (hcd->driver->pci_suspend) {
- retval = hcd->driver->pci_suspend(hcd, message);
+ retval = hcd->driver->pci_suspend(hcd);
suspend_report_result(hcd->driver->pci_suspend, retval);
if (retval)
- goto done;
+ return retval;
}
- synchronize_irq(dev->irq);
+ synchronize_irq(pci_dev->irq);
/* Downstream ports from this root hub should already be quiesced, so
* there will be no DMA activity. Now we can shut down the upstream
- * link (except maybe for PME# resume signaling) and enter some PCI
- * low power state, if the hardware allows.
+ * link (except maybe for PME# resume signaling). We'll enter a
+ * low power state during suspend_noirq, if the hardware allows.
*/
- pci_disable_device(dev);
+ pci_disable_device(pci_dev);
+ return retval;
+}
+
+static int hcd_pci_suspend_noirq(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
+ int retval;
+
+ retval = check_root_hub_suspended(dev);
+ if (retval)
+ return retval;
- pci_save_state(dev);
+ pci_save_state(pci_dev);
- /* Don't fail on error to enable wakeup. We rely on pci code
- * to reject requests the hardware can't implement, rather
- * than coding the same thing.
+ /* If the root hub is HALTed rather than SUSPENDed,
+ * disallow remote wakeup.
*/
- wake = (hcd->state == HC_STATE_SUSPENDED &&
- device_may_wakeup(&dev->dev));
- w = pci_wake_from_d3(dev, wake);
- if (w < 0)
- wake = w;
- dev_dbg(&dev->dev, "wakeup: %d\n", wake);
-
- /* Don't change state if we don't need to */
- if (message.event == PM_EVENT_FREEZE ||
- message.event == PM_EVENT_PRETHAW) {
- dev_dbg(&dev->dev, "--> no state change\n");
- goto done;
- }
+ if (hcd->state == HC_STATE_HALT)
+ device_set_wakeup_enable(dev, 0);
+ dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
- has_pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
- if (!has_pci_pm) {
- dev_dbg(&dev->dev, "--> PCI D0 legacy\n");
+ /* Possibly enable remote wakeup,
+ * choose the appropriate low-power state, and go to that state.
+ */
+ retval = pci_prepare_to_sleep(pci_dev);
+ if (retval == -EIO) { /* Low-power not supported */
+ dev_dbg(dev, "--> PCI D0 legacy\n");
+ retval = 0;
+ } else if (retval == 0) {
+ dev_dbg(dev, "--> PCI %s\n",
+ pci_power_name(pci_dev->current_state));
} else {
-
- /* NOTE: dev->current_state becomes nonzero only here, and
- * only for devices that support PCI PM. Also, exiting
- * PCI_D3 (but not PCI_D1 or PCI_D2) is allowed to reset
- * some device state (e.g. as part of clock reinit).
- */
- retval = pci_set_power_state(dev, PCI_D3hot);
- suspend_report_result(pci_set_power_state, retval);
- if (retval == 0) {
- dev_dbg(&dev->dev, "--> PCI D3\n");
- } else {
- dev_dbg(&dev->dev, "PCI D3 suspend fail, %d\n",
- retval);
- pci_restore_state(dev);
- }
+ suspend_report_result(pci_prepare_to_sleep, retval);
+ return retval;
}
#ifdef CONFIG_PPC_PMAC
- if (retval == 0) {
- /* Disable ASIC clocks for USB */
- if (machine_is(powermac)) {
- struct device_node *of_node;
-
- of_node = pci_device_to_OF_node(dev);
- if (of_node)
- pmac_call_feature(PMAC_FTR_USB_ENABLE,
- of_node, 0, 0);
- }
+ /* Disable ASIC clocks for USB */
+ if (machine_is(powermac)) {
+ struct device_node *of_node;
+
+ of_node = pci_device_to_OF_node(pci_dev);
+ if (of_node)
+ pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0);
}
#endif
-
- done:
return retval;
}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
-/**
- * usb_hcd_pci_resume - power management resume of a PCI-based HCD
- * @dev: USB Host Controller being resumed
- *
- * Store this function in the HCD's struct pci_driver as .resume.
- */
-int usb_hcd_pci_resume(struct pci_dev *dev)
+static int hcd_pci_resume_noirq(struct device *dev)
{
- struct usb_hcd *hcd;
- int retval;
+ struct pci_dev *pci_dev = to_pci_dev(dev);
#ifdef CONFIG_PPC_PMAC
/* Reenable ASIC clocks for USB */
if (machine_is(powermac)) {
struct device_node *of_node;
- of_node = pci_device_to_OF_node(dev);
+ of_node = pci_device_to_OF_node(pci_dev);
if (of_node)
pmac_call_feature(PMAC_FTR_USB_ENABLE,
of_node, 0, 1);
}
#endif
- pci_restore_state(dev);
+ /* Go back to D0 and disable remote wakeup */
+ pci_back_from_sleep(pci_dev);
+ return 0;
+}
+
+static int resume_common(struct device *dev, bool hibernated)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
+ int retval;
- hcd = pci_get_drvdata(dev);
if (hcd->state != HC_STATE_SUSPENDED) {
- dev_dbg(hcd->self.controller,
- "can't resume, not suspended!\n");
+ dev_dbg(dev, "can't resume, not suspended!\n");
return 0;
}
- pci_enable_wake(dev, PCI_D0, false);
-
- retval = pci_enable_device(dev);
+ retval = pci_enable_device(pci_dev);
if (retval < 0) {
- dev_err(&dev->dev, "can't re-enable after resume, %d!\n",
- retval);
+ dev_err(dev, "can't re-enable after resume, %d!\n", retval);
return retval;
}
- pci_set_master(dev);
-
- /* yes, ignore this result too... */
- (void) pci_wake_from_d3(dev, 0);
+ pci_set_master(pci_dev);
clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
if (hcd->driver->pci_resume) {
- retval = hcd->driver->pci_resume(hcd);
+ retval = hcd->driver->pci_resume(hcd, hibernated);
if (retval) {
- dev_err(hcd->self.controller,
- "PCI post-resume error %d!\n", retval);
+ dev_err(dev, "PCI post-resume error %d!\n", retval);
usb_hc_died(hcd);
}
}
return retval;
}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_resume);
-#endif /* CONFIG_PM */
-
-/**
- * usb_hcd_pci_shutdown - shutdown host controller
- * @dev: USB Host Controller being shutdown
- */
-void usb_hcd_pci_shutdown(struct pci_dev *dev)
+static int hcd_pci_resume(struct device *dev)
{
- struct usb_hcd *hcd;
-
- hcd = pci_get_drvdata(dev);
- if (!hcd)
- return;
+ return resume_common(dev, false);
+}
- if (hcd->driver->shutdown)
- hcd->driver->shutdown(hcd);
+static int hcd_pci_restore(struct device *dev)
+{
+ return resume_common(dev, true);
}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
+struct dev_pm_ops usb_hcd_pci_pm_ops = {
+ .suspend = hcd_pci_suspend,
+ .suspend_noirq = hcd_pci_suspend_noirq,
+ .resume_noirq = hcd_pci_resume_noirq,
+ .resume = hcd_pci_resume,
+ .freeze = check_root_hub_suspended,
+ .freeze_noirq = check_root_hub_suspended,
+ .thaw_noirq = NULL,
+ .thaw = NULL,
+ .poweroff = hcd_pci_suspend,
+ .poweroff_noirq = hcd_pci_suspend_noirq,
+ .restore_noirq = hcd_pci_resume_noirq,
+ .restore = hcd_pci_restore,
+};
+EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
+
+#endif /* CONFIG_PM_SLEEP */
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 42b93da1085..ce3f453f02e 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -128,6 +128,27 @@ static inline int is_root_hub(struct usb_device *udev)
#define KERNEL_REL ((LINUX_VERSION_CODE >> 16) & 0x0ff)
#define KERNEL_VER ((LINUX_VERSION_CODE >> 8) & 0x0ff)
+/* usb 3.0 root hub device descriptor */
+static const u8 usb3_rh_dev_descriptor[18] = {
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x00, 0x03, /* __le16 bcdUSB; v3.0 */
+
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x03, /* __u8 bDeviceProtocol; USB 3.0 hub */
+ 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
+
+ 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */
+ 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
+ KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
+
+ 0x03, /* __u8 iManufacturer; */
+ 0x02, /* __u8 iProduct; */
+ 0x01, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
/* usb 2.0 root hub device descriptor */
static const u8 usb2_rh_dev_descriptor [18] = {
0x12, /* __u8 bLength; */
@@ -273,6 +294,47 @@ static const u8 hs_rh_config_descriptor [] = {
0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
};
+static const u8 ss_rh_config_descriptor[] = {
+ /* one configuration */
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, 0x00, /* __le16 wTotalLength; FIXME */
+ 0x01, /* __u8 bNumInterfaces; (1) */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0xc0, /* __u8 bmAttributes;
+ Bit 7: must be set,
+ 6: Self-powered,
+ 5: Remote wakeup,
+ 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* one interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* one endpoint (status change endpoint) */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
+ * see hub.c:hub_configure() for details. */
+ (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
+ 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
+ /*
+ * All 3.0 hubs should have an endpoint companion descriptor,
+ * but we're ignoring that for now. FIXME?
+ */
+};
+
/*-------------------------------------------------------------------------*/
/*
@@ -426,23 +488,39 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
switch (wValue & 0xff00) {
case USB_DT_DEVICE << 8:
- if (hcd->driver->flags & HCD_USB2)
+ switch (hcd->driver->flags & HCD_MASK) {
+ case HCD_USB3:
+ bufp = usb3_rh_dev_descriptor;
+ break;
+ case HCD_USB2:
bufp = usb2_rh_dev_descriptor;
- else if (hcd->driver->flags & HCD_USB11)
+ break;
+ case HCD_USB11:
bufp = usb11_rh_dev_descriptor;
- else
+ break;
+ default:
goto error;
+ }
len = 18;
if (hcd->has_tt)
patch_protocol = 1;
break;
case USB_DT_CONFIG << 8:
- if (hcd->driver->flags & HCD_USB2) {
+ switch (hcd->driver->flags & HCD_MASK) {
+ case HCD_USB3:
+ bufp = ss_rh_config_descriptor;
+ len = sizeof ss_rh_config_descriptor;
+ break;
+ case HCD_USB2:
bufp = hs_rh_config_descriptor;
len = sizeof hs_rh_config_descriptor;
- } else {
+ break;
+ case HCD_USB11:
bufp = fs_rh_config_descriptor;
len = sizeof fs_rh_config_descriptor;
+ break;
+ default:
+ goto error;
}
if (device_can_wakeup(&hcd->self.root_hub->dev))
patch_wakeup = 1;
@@ -755,23 +833,6 @@ static struct attribute_group usb_bus_attr_group = {
/*-------------------------------------------------------------------------*/
-static struct class *usb_host_class;
-
-int usb_host_init(void)
-{
- int retval = 0;
-
- usb_host_class = class_create(THIS_MODULE, "usb_host");
- if (IS_ERR(usb_host_class))
- retval = PTR_ERR(usb_host_class);
- return retval;
-}
-
-void usb_host_cleanup(void)
-{
- class_destroy(usb_host_class);
-}
-
/**
* usb_bus_init - shared initialization code
* @bus: the bus structure being initialized
@@ -818,12 +879,6 @@ static int usb_register_bus(struct usb_bus *bus)
set_bit (busnum, busmap.busmap);
bus->busnum = busnum;
- bus->dev = device_create(usb_host_class, bus->controller, MKDEV(0, 0),
- bus, "usb_host%d", busnum);
- result = PTR_ERR(bus->dev);
- if (IS_ERR(bus->dev))
- goto error_create_class_dev;
-
/* Add it to the local list of buses */
list_add (&bus->bus_list, &usb_bus_list);
mutex_unlock(&usb_bus_list_lock);
@@ -834,8 +889,6 @@ static int usb_register_bus(struct usb_bus *bus)
"number %d\n", bus->busnum);
return 0;
-error_create_class_dev:
- clear_bit(busnum, busmap.busmap);
error_find_busnum:
mutex_unlock(&usb_bus_list_lock);
return result;
@@ -865,8 +918,6 @@ static void usb_deregister_bus (struct usb_bus *bus)
usb_notify_remove_bus(bus);
clear_bit (bus->busnum, busmap.busmap);
-
- device_unregister(bus->dev);
}
/**
@@ -1199,7 +1250,8 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
/* Map the URB's buffers for DMA access.
* Lower level HCD code should use *_dma exclusively,
- * unless it uses pio or talks to another transport.
+ * unless it uses pio or talks to another transport,
+ * or uses the provided scatter gather list for bulk.
*/
if (is_root_hub(urb->dev))
return 0;
@@ -1520,6 +1572,92 @@ rescan:
}
}
+/* Check whether a new configuration or alt setting for an interface
+ * will exceed the bandwidth for the bus (or the host controller resources).
+ * Only pass in a non-NULL config or interface, not both!
+ * Passing NULL for both new_config and new_intf means the device will be
+ * de-configured by issuing a set configuration 0 command.
+ */
+int usb_hcd_check_bandwidth(struct usb_device *udev,
+ struct usb_host_config *new_config,
+ struct usb_interface *new_intf)
+{
+ int num_intfs, i, j;
+ struct usb_interface_cache *intf_cache;
+ struct usb_host_interface *alt = 0;
+ int ret = 0;
+ struct usb_hcd *hcd;
+ struct usb_host_endpoint *ep;
+
+ hcd = bus_to_hcd(udev->bus);
+ if (!hcd->driver->check_bandwidth)
+ return 0;
+
+ /* Configuration is being removed - set configuration 0 */
+ if (!new_config && !new_intf) {
+ for (i = 1; i < 16; ++i) {
+ ep = udev->ep_out[i];
+ if (ep)
+ hcd->driver->drop_endpoint(hcd, udev, ep);
+ ep = udev->ep_in[i];
+ if (ep)
+ hcd->driver->drop_endpoint(hcd, udev, ep);
+ }
+ hcd->driver->check_bandwidth(hcd, udev);
+ return 0;
+ }
+ /* Check if the HCD says there's enough bandwidth. Enable all endpoints
+ * each interface's alt setting 0 and ask the HCD to check the bandwidth
+ * of the bus. There will always be bandwidth for endpoint 0, so it's
+ * ok to exclude it.
+ */
+ if (new_config) {
+ num_intfs = new_config->desc.bNumInterfaces;
+ /* Remove endpoints (except endpoint 0, which is always on the
+ * schedule) from the old config from the schedule
+ */
+ for (i = 1; i < 16; ++i) {
+ ep = udev->ep_out[i];
+ if (ep) {
+ ret = hcd->driver->drop_endpoint(hcd, udev, ep);
+ if (ret < 0)
+ goto reset;
+ }
+ ep = udev->ep_in[i];
+ if (ep) {
+ ret = hcd->driver->drop_endpoint(hcd, udev, ep);
+ if (ret < 0)
+ goto reset;
+ }
+ }
+ for (i = 0; i < num_intfs; ++i) {
+
+ /* Dig the endpoints for alt setting 0 out of the
+ * interface cache for this interface
+ */
+ intf_cache = new_config->intf_cache[i];
+ for (j = 0; j < intf_cache->num_altsetting; j++) {
+ if (intf_cache->altsetting[j].desc.bAlternateSetting == 0)
+ alt = &intf_cache->altsetting[j];
+ }
+ if (!alt) {
+ printk(KERN_DEBUG "Did not find alt setting 0 for intf %d\n", i);
+ continue;
+ }
+ for (j = 0; j < alt->desc.bNumEndpoints; j++) {
+ ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
+ if (ret < 0)
+ goto reset;
+ }
+ }
+ }
+ ret = hcd->driver->check_bandwidth(hcd, udev);
+reset:
+ if (ret < 0)
+ hcd->driver->reset_bandwidth(hcd, udev);
+ return ret;
+}
+
/* Disables the endpoint: synchronizes with the hcd to make sure all
* endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
* have been called previously. Use for set_configuration, set_interface,
@@ -1897,8 +2035,20 @@ int usb_add_hcd(struct usb_hcd *hcd,
retval = -ENOMEM;
goto err_allocate_root_hub;
}
- rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH :
- USB_SPEED_FULL;
+
+ switch (hcd->driver->flags & HCD_MASK) {
+ case HCD_USB11:
+ rhdev->speed = USB_SPEED_FULL;
+ break;
+ case HCD_USB2:
+ rhdev->speed = USB_SPEED_HIGH;
+ break;
+ case HCD_USB3:
+ rhdev->speed = USB_SPEED_SUPER;
+ break;
+ default:
+ goto err_allocate_root_hub;
+ }
hcd->self.root_hub = rhdev;
/* wakeup flag init defaults to "everything works" for root hubs,
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index e7d4479de41..d397ecfd5b1 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -173,6 +173,8 @@ struct hc_driver {
#define HCD_LOCAL_MEM 0x0002 /* HC needs local memory */
#define HCD_USB11 0x0010 /* USB 1.1 */
#define HCD_USB2 0x0020 /* USB 2.0 */
+#define HCD_USB3 0x0040 /* USB 3.0 */
+#define HCD_MASK 0x0070
/* called to init HCD and root hub */
int (*reset) (struct usb_hcd *hcd);
@@ -182,10 +184,10 @@ struct hc_driver {
* a whole, not just the root hub; they're for PCI bus glue.
*/
/* called after suspending the hub, before entering D3 etc */
- int (*pci_suspend) (struct usb_hcd *hcd, pm_message_t message);
+ int (*pci_suspend)(struct usb_hcd *hcd);
/* called after entering D0 (etc), before resuming the hub */
- int (*pci_resume) (struct usb_hcd *hcd);
+ int (*pci_resume)(struct usb_hcd *hcd, bool hibernated);
/* cleanly make HCD stop writing memory and doing I/O */
void (*stop) (struct usb_hcd *hcd);
@@ -224,6 +226,43 @@ struct hc_driver {
void (*relinquish_port)(struct usb_hcd *, int);
/* has a port been handed over to a companion? */
int (*port_handed_over)(struct usb_hcd *, int);
+
+ /* xHCI specific functions */
+ /* Called by usb_alloc_dev to alloc HC device structures */
+ int (*alloc_dev)(struct usb_hcd *, struct usb_device *);
+ /* Called by usb_release_dev to free HC device structures */
+ void (*free_dev)(struct usb_hcd *, struct usb_device *);
+
+ /* Bandwidth computation functions */
+ /* Note that add_endpoint() can only be called once per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * drop_endpoint() can only be called once per endpoint also.
+ * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
+ * add the endpoint to the schedule with possibly new parameters denoted by a
+ * different endpoint descriptor in usb_host_endpoint.
+ * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
+ * not allowed.
+ */
+ /* Allocate endpoint resources and add them to a new schedule */
+ int (*add_endpoint)(struct usb_hcd *, struct usb_device *, struct usb_host_endpoint *);
+ /* Drop an endpoint from a new schedule */
+ int (*drop_endpoint)(struct usb_hcd *, struct usb_device *, struct usb_host_endpoint *);
+ /* Check that a new hardware configuration, set using
+ * endpoint_enable and endpoint_disable, does not exceed bus
+ * bandwidth. This must be called before any set configuration
+ * or set interface requests are sent to the device.
+ */
+ int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
+ /* Reset the device schedule to the last known good schedule,
+ * which was set from a previous successful call to
+ * check_bandwidth(). This reverts any add_endpoint() and
+ * drop_endpoint() calls since that last successful call.
+ * Used for when a check_bandwidth() call fails due to resource
+ * or bandwidth constraints.
+ */
+ void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
+ /* Returns the hardware-chosen device address */
+ int (*address_device)(struct usb_hcd *, struct usb_device *udev);
};
extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
@@ -242,6 +281,9 @@ extern void usb_hcd_disable_endpoint(struct usb_device *udev,
extern void usb_hcd_reset_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep);
extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
+extern int usb_hcd_check_bandwidth(struct usb_device *udev,
+ struct usb_host_config *new_config,
+ struct usb_interface *new_intf);
extern int usb_hcd_get_frame_number(struct usb_device *udev);
extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
@@ -261,14 +303,11 @@ struct pci_device_id;
extern int usb_hcd_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id);
extern void usb_hcd_pci_remove(struct pci_dev *dev);
-
-#ifdef CONFIG_PM
-extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
-extern int usb_hcd_pci_resume(struct pci_dev *dev);
-#endif /* CONFIG_PM */
-
extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
+#ifdef CONFIG_PM_SLEEP
+extern struct dev_pm_ops usb_hcd_pci_pm_ops;
+#endif
#endif /* CONFIG_PCI */
/* pci-ish (pdev null is ok) buffer alloc/mapping support */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index be86ae3f408..2af3b4f0605 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -155,6 +155,8 @@ static inline char *portspeed(int portstatus)
return "480 Mb/s";
else if (portstatus & (1 << USB_PORT_FEAT_LOWSPEED))
return "1.5 Mb/s";
+ else if (portstatus & (1 << USB_PORT_FEAT_SUPERSPEED))
+ return "5.0 Gb/s";
else
return "12 Mb/s";
}
@@ -457,13 +459,13 @@ static void hub_tt_kevent (struct work_struct *work)
spin_lock_irqsave (&hub->tt.lock, flags);
while (--limit && !list_empty (&hub->tt.clear_list)) {
- struct list_head *temp;
+ struct list_head *next;
struct usb_tt_clear *clear;
struct usb_device *hdev = hub->hdev;
int status;
- temp = hub->tt.clear_list.next;
- clear = list_entry (temp, struct usb_tt_clear, clear_list);
+ next = hub->tt.clear_list.next;
+ clear = list_entry (next, struct usb_tt_clear, clear_list);
list_del (&clear->clear_list);
/* drop lock so HCD can concurrently report other TT errors */
@@ -951,6 +953,9 @@ static int hub_configure(struct usb_hub *hub,
ret);
hub->tt.hub = hdev;
break;
+ case 3:
+ /* USB 3.0 hubs don't have a TT */
+ break;
default:
dev_dbg(hub_dev, "Unrecognized hub protocol %d\n",
hdev->descriptor.bDeviceProtocol);
@@ -1323,6 +1328,11 @@ EXPORT_SYMBOL_GPL(usb_set_device_state);
* 0 is reserved by USB for default address; (b) Linux's USB stack
* uses always #1 for the root hub of the controller. So USB stack's
* port #1, which is wusb virtual-port #0 has address #2.
+ *
+ * Devices connected under xHCI are not as simple. The host controller
+ * supports virtualization, so the hardware assigns device addresses and
+ * the HCD must setup data structures before issuing a set address
+ * command to the hardware.
*/
static void choose_address(struct usb_device *udev)
{
@@ -1642,6 +1652,9 @@ int usb_new_device(struct usb_device *udev)
err = usb_configure_device(udev); /* detect & probe dev/intfs */
if (err < 0)
goto fail;
+ dev_dbg(&udev->dev, "udev %d, busnum %d, minor = %d\n",
+ udev->devnum, udev->bus->busnum,
+ (((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
/* export the usbdev device-node for libusb */
udev->dev.devt = MKDEV(USB_DEVICE_MAJOR,
(((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
@@ -2395,19 +2408,29 @@ EXPORT_SYMBOL_GPL(usb_ep0_reinit);
static int hub_set_address(struct usb_device *udev, int devnum)
{
int retval;
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
- if (devnum <= 1)
+ /*
+ * The host controller will choose the device address,
+ * instead of the core having chosen it earlier
+ */
+ if (!hcd->driver->address_device && devnum <= 1)
return -EINVAL;
if (udev->state == USB_STATE_ADDRESS)
return 0;
if (udev->state != USB_STATE_DEFAULT)
return -EINVAL;
- retval = usb_control_msg(udev, usb_sndaddr0pipe(),
- USB_REQ_SET_ADDRESS, 0, devnum, 0,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (hcd->driver->address_device) {
+ retval = hcd->driver->address_device(hcd, udev);
+ } else {
+ retval = usb_control_msg(udev, usb_sndaddr0pipe(),
+ USB_REQ_SET_ADDRESS, 0, devnum, 0,
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (retval == 0)
+ update_address(udev, devnum);
+ }
if (retval == 0) {
/* Device now using proper address. */
- update_address(udev, devnum);
usb_set_device_state(udev, USB_STATE_ADDRESS);
usb_ep0_reinit(udev);
}
@@ -2430,6 +2453,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
static DEFINE_MUTEX(usb_address0_mutex);
struct usb_device *hdev = hub->hdev;
+ struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
int i, j, retval;
unsigned delay = HUB_SHORT_RESET_TIME;
enum usb_device_speed oldspeed = udev->speed;
@@ -2452,11 +2476,24 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
mutex_lock(&usb_address0_mutex);
- /* Reset the device; full speed may morph to high speed */
- retval = hub_port_reset(hub, port1, udev, delay);
- if (retval < 0) /* error or disconnect */
+ if ((hcd->driver->flags & HCD_USB3) && udev->config) {
+ /* FIXME this will need special handling by the xHCI driver. */
+ dev_dbg(&udev->dev,
+ "xHCI reset of configured device "
+ "not supported yet.\n");
+ retval = -EINVAL;
goto fail;
- /* success, speed is known */
+ } else if (!udev->config && oldspeed == USB_SPEED_SUPER) {
+ /* Don't reset USB 3.0 devices during an initial setup */
+ usb_set_device_state(udev, USB_STATE_DEFAULT);
+ } else {
+ /* Reset the device; full speed may morph to high speed */
+ /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
+ retval = hub_port_reset(hub, port1, udev, delay);
+ if (retval < 0) /* error or disconnect */
+ goto fail;
+ /* success, speed is known */
+ }
retval = -ENODEV;
if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) {
@@ -2471,6 +2508,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
* reported as 0xff in the device descriptor). WUSB1.0[4.8.1].
*/
switch (udev->speed) {
+ case USB_SPEED_SUPER:
case USB_SPEED_VARIABLE: /* fixed at 512 */
udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);
break;
@@ -2496,16 +2534,20 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
case USB_SPEED_LOW: speed = "low"; break;
case USB_SPEED_FULL: speed = "full"; break;
case USB_SPEED_HIGH: speed = "high"; break;
+ case USB_SPEED_SUPER:
+ speed = "super";
+ break;
case USB_SPEED_VARIABLE:
speed = "variable";
type = "Wireless ";
break;
default: speed = "?"; break;
}
- dev_info (&udev->dev,
- "%s %s speed %sUSB device using %s and address %d\n",
- (udev->config) ? "reset" : "new", speed, type,
- udev->bus->controller->driver->name, devnum);
+ if (udev->speed != USB_SPEED_SUPER)
+ dev_info(&udev->dev,
+ "%s %s speed %sUSB device using %s and address %d\n",
+ (udev->config) ? "reset" : "new", speed, type,
+ udev->bus->controller->driver->name, devnum);
/* Set up TT records, if needed */
if (hdev->tt) {
@@ -2530,7 +2572,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
* value.
*/
for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) {
- if (USE_NEW_SCHEME(retry_counter)) {
+ /*
+ * An xHCI controller cannot send any packets to a device until
+ * a set address command successfully completes.
+ */
+ if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3)) {
struct usb_device_descriptor *buf;
int r = 0;
@@ -2596,7 +2642,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
* unauthorized address in the Connect Ack sequence;
* authorization will assign the final address.
*/
- if (udev->wusb == 0) {
+ if (udev->wusb == 0) {
for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
retval = hub_set_address(udev, devnum);
if (retval >= 0)
@@ -2609,13 +2655,20 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
devnum, retval);
goto fail;
}
+ if (udev->speed == USB_SPEED_SUPER) {
+ devnum = udev->devnum;
+ dev_info(&udev->dev,
+ "%s SuperSpeed USB device using %s and address %d\n",
+ (udev->config) ? "reset" : "new",
+ udev->bus->controller->driver->name, devnum);
+ }
/* cope with hardware quirkiness:
* - let SET_ADDRESS settle, some device hardware wants it
* - read ep0 maxpacket even for high and low speed,
*/
msleep(10);
- if (USE_NEW_SCHEME(retry_counter))
+ if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3))
break;
}
@@ -2634,8 +2687,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
if (retval)
goto fail;
- i = udev->descriptor.bMaxPacketSize0 == 0xff? /* wusb device? */
- 512 : udev->descriptor.bMaxPacketSize0;
+ if (udev->descriptor.bMaxPacketSize0 == 0xff ||
+ udev->speed == USB_SPEED_SUPER)
+ i = 512;
+ else
+ i = udev->descriptor.bMaxPacketSize0;
if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) {
if (udev->speed != USB_SPEED_FULL ||
!(i == 8 || i == 16 || i == 32 || i == 64)) {
@@ -2847,19 +2903,41 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
}
usb_set_device_state(udev, USB_STATE_POWERED);
- udev->speed = USB_SPEED_UNKNOWN;
udev->bus_mA = hub->mA_per_port;
udev->level = hdev->level + 1;
udev->wusb = hub_is_wusb(hub);
- /* set the address */
- choose_address(udev);
- if (udev->devnum <= 0) {
- status = -ENOTCONN; /* Don't retry */
- goto loop;
+ /*
+ * USB 3.0 devices are reset automatically before the connect
+ * port status change appears, and the root hub port status
+ * shows the correct speed. We also get port change
+ * notifications for USB 3.0 devices from the USB 3.0 portion of
+ * an external USB 3.0 hub, but this isn't handled correctly yet
+ * FIXME.
+ */
+
+ if (!(hcd->driver->flags & HCD_USB3))
+ udev->speed = USB_SPEED_UNKNOWN;
+ else if ((hdev->parent == NULL) &&
+ (portstatus & (1 << USB_PORT_FEAT_SUPERSPEED)))
+ udev->speed = USB_SPEED_SUPER;
+ else
+ udev->speed = USB_SPEED_UNKNOWN;
+
+ /*
+ * xHCI needs to issue an address device command later
+ * in the hub_port_init sequence for SS/HS/FS/LS devices.
+ */
+ if (!(hcd->driver->flags & HCD_USB3)) {
+ /* set the address */
+ choose_address(udev);
+ if (udev->devnum <= 0) {
+ status = -ENOTCONN; /* Don't retry */
+ goto loop;
+ }
}
- /* reset and get descriptor */
+ /* reset (non-USB 3.0 devices) and get descriptor */
status = hub_port_init(hub, udev, port1, i);
if (status < 0)
goto loop;
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 2a116ce53c9..889c0f32a40 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -47,7 +47,10 @@
#define USB_PORT_FEAT_L1 5 /* L1 suspend */
#define USB_PORT_FEAT_POWER 8
#define USB_PORT_FEAT_LOWSPEED 9
+/* This value was never in Table 11-17 */
#define USB_PORT_FEAT_HIGHSPEED 10
+/* This value is also fake */
+#define USB_PORT_FEAT_SUPERSPEED 11
#define USB_PORT_FEAT_C_CONNECTION 16
#define USB_PORT_FEAT_C_ENABLE 17
#define USB_PORT_FEAT_C_SUSPEND 18
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b6262837765..2bed83caacb 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -10,6 +10,7 @@
#include <linux/mm.h>
#include <linux/timer.h>
#include <linux/ctype.h>
+#include <linux/nls.h>
#include <linux/device.h>
#include <linux/scatterlist.h>
#include <linux/usb/quirks.h>
@@ -364,6 +365,7 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
int i;
int urb_flags;
int dma;
+ int use_sg;
if (!io || !dev || !sg
|| usb_pipecontrol(pipe)
@@ -391,7 +393,19 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
if (io->entries <= 0)
return io->entries;
- io->urbs = kmalloc(io->entries * sizeof *io->urbs, mem_flags);
+ /* If we're running on an xHCI host controller, queue the whole scatter
+ * gather list with one call to urb_enqueue(). This is only for bulk,
+ * as that endpoint type does not care how the data gets broken up
+ * across frames.
+ */
+ if (usb_pipebulk(pipe) &&
+ bus_to_hcd(dev->bus)->driver->flags & HCD_USB3) {
+ io->urbs = kmalloc(sizeof *io->urbs, mem_flags);
+ use_sg = true;
+ } else {
+ io->urbs = kmalloc(io->entries * sizeof *io->urbs, mem_flags);
+ use_sg = false;
+ }
if (!io->urbs)
goto nomem;
@@ -401,62 +415,92 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
if (usb_pipein(pipe))
urb_flags |= URB_SHORT_NOT_OK;
- for_each_sg(sg, sg, io->entries, i) {
- unsigned len;
-
- io->urbs[i] = usb_alloc_urb(0, mem_flags);
- if (!io->urbs[i]) {
- io->entries = i;
+ if (use_sg) {
+ io->urbs[0] = usb_alloc_urb(0, mem_flags);
+ if (!io->urbs[0]) {
+ io->entries = 0;
goto nomem;
}
- io->urbs[i]->dev = NULL;
- io->urbs[i]->pipe = pipe;
- io->urbs[i]->interval = period;
- io->urbs[i]->transfer_flags = urb_flags;
-
- io->urbs[i]->complete = sg_complete;
- io->urbs[i]->context = io;
-
- /*
- * Some systems need to revert to PIO when DMA is temporarily
- * unavailable. For their sakes, both transfer_buffer and
- * transfer_dma are set when possible. However this can only
- * work on systems without:
- *
- * - HIGHMEM, since DMA buffers located in high memory are
- * not directly addressable by the CPU for PIO;
- *
- * - IOMMU, since dma_map_sg() is allowed to use an IOMMU to
- * make virtually discontiguous buffers be "dma-contiguous"
- * so that PIO and DMA need diferent numbers of URBs.
- *
- * So when HIGHMEM or IOMMU are in use, transfer_buffer is NULL
- * to prevent stale pointers and to help spot bugs.
- */
- if (dma) {
- io->urbs[i]->transfer_dma = sg_dma_address(sg);
- len = sg_dma_len(sg);
+ io->urbs[0]->dev = NULL;
+ io->urbs[0]->pipe = pipe;
+ io->urbs[0]->interval = period;
+ io->urbs[0]->transfer_flags = urb_flags;
+
+ io->urbs[0]->complete = sg_complete;
+ io->urbs[0]->context = io;
+ /* A length of zero means transfer the whole sg list */
+ io->urbs[0]->transfer_buffer_length = length;
+ if (length == 0) {
+ for_each_sg(sg, sg, io->entries, i) {
+ io->urbs[0]->transfer_buffer_length +=
+ sg_dma_len(sg);
+ }
+ }
+ io->urbs[0]->sg = io;
+ io->urbs[0]->num_sgs = io->entries;
+ io->entries = 1;
+ } else {
+ for_each_sg(sg, sg, io->entries, i) {
+ unsigned len;
+
+ io->urbs[i] = usb_alloc_urb(0, mem_flags);
+ if (!io->urbs[i]) {
+ io->entries = i;
+ goto nomem;
+ }
+
+ io->urbs[i]->dev = NULL;
+ io->urbs[i]->pipe = pipe;
+ io->urbs[i]->interval = period;
+ io->urbs[i]->transfer_flags = urb_flags;
+
+ io->urbs[i]->complete = sg_complete;
+ io->urbs[i]->context = io;
+
+ /*
+ * Some systems need to revert to PIO when DMA is
+ * temporarily unavailable. For their sakes, both
+ * transfer_buffer and transfer_dma are set when
+ * possible. However this can only work on systems
+ * without:
+ *
+ * - HIGHMEM, since DMA buffers located in high memory
+ * are not directly addressable by the CPU for PIO;
+ *
+ * - IOMMU, since dma_map_sg() is allowed to use an
+ * IOMMU to make virtually discontiguous buffers be
+ * "dma-contiguous" so that PIO and DMA need diferent
+ * numbers of URBs.
+ *
+ * So when HIGHMEM or IOMMU are in use, transfer_buffer
+ * is NULL to prevent stale pointers and to help spot
+ * bugs.
+ */
+ if (dma) {
+ io->urbs[i]->transfer_dma = sg_dma_address(sg);
+ len = sg_dma_len(sg);
#if defined(CONFIG_HIGHMEM) || defined(CONFIG_GART_IOMMU)
- io->urbs[i]->transfer_buffer = NULL;
+ io->urbs[i]->transfer_buffer = NULL;
#else
- io->urbs[i]->transfer_buffer = sg_virt(sg);
+ io->urbs[i]->transfer_buffer = sg_virt(sg);
#endif
- } else {
- /* hc may use _only_ transfer_buffer */
- io->urbs[i]->transfer_buffer = sg_virt(sg);
- len = sg->length;
- }
+ } else {
+ /* hc may use _only_ transfer_buffer */
+ io->urbs[i]->transfer_buffer = sg_virt(sg);
+ len = sg->length;
+ }
- if (length) {
- len = min_t(unsigned, len, length);
- length -= len;
- if (length == 0)
- io->entries = i + 1;
+ if (length) {
+ len = min_t(unsigned, len, length);
+ length -= len;
+ if (length == 0)
+ io->entries = i + 1;
+ }
+ io->urbs[i]->transfer_buffer_length = len;
}
- io->urbs[i]->transfer_buffer_length = len;
+ io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT;
}
- io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT;
/* transaction state */
io->count = io->entries;
@@ -509,6 +553,10 @@ EXPORT_SYMBOL_GPL(usb_sg_init);
* could be transferred. That capability is less useful for low or full
* speed interrupt endpoints, which allow at most one packet per millisecond,
* of at most 8 or 64 bytes (respectively).
+ *
+ * It is not necessary to call this function to reserve bandwidth for devices
+ * under an xHCI host controller, as the bandwidth is reserved when the
+ * configuration or interface alt setting is selected.
*/
void usb_sg_wait(struct usb_sg_request *io)
{
@@ -759,7 +807,7 @@ static int usb_string_sub(struct usb_device *dev, unsigned int langid,
}
/**
- * usb_string - returns ISO 8859-1 version of a string descriptor
+ * usb_string - returns UTF-8 version of a string descriptor
* @dev: the device whose string descriptor is being retrieved
* @index: the number of the descriptor
* @buf: where to put the string
@@ -767,17 +815,10 @@ static int usb_string_sub(struct usb_device *dev, unsigned int langid,
* Context: !in_interrupt ()
*
* This converts the UTF-16LE encoded strings returned by devices, from
- * usb_get_string_descriptor(), to null-terminated ISO-8859-1 encoded ones
- * that are more usable in most kernel contexts. Note that all characters
- * in the chosen descriptor that can't be encoded using ISO-8859-1
- * are converted to the question mark ("?") character, and this function
+ * usb_get_string_descriptor(), to null-terminated UTF-8 encoded ones
+ * that are more usable in most kernel contexts. Note that this function
* chooses strings in the first language supported by the device.
*
- * The ASCII (or, redundantly, "US-ASCII") character set is the seven-bit
- * subset of ISO 8859-1. ISO-8859-1 is the eight-bit subset of Unicode,
- * and is appropriate for use many uses of English and several other
- * Western European languages. (But it doesn't include the "Euro" symbol.)
- *
* This call is synchronous, and may not be used in an interrupt context.
*
* Returns length of the string (>= 0) or usb_control_msg status (< 0).
@@ -786,7 +827,6 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
{
unsigned char *tbuf;
int err;
- unsigned int u, idx;
if (dev->state == USB_STATE_SUSPENDED)
return -EHOSTUNREACH;
@@ -821,16 +861,9 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
goto errout;
size--; /* leave room for trailing NULL char in output buffer */
- for (idx = 0, u = 2; u < err; u += 2) {
- if (idx >= size)
- break;
- if (tbuf[u+1]) /* high byte */
- buf[idx++] = '?'; /* non ISO-8859-1 character */
- else
- buf[idx++] = tbuf[u];
- }
- buf[idx] = 0;
- err = idx;
+ err = utf16s_to_utf8s((wchar_t *) &tbuf[2], (err - 2) / 2,
+ UTF16_LITTLE_ENDIAN, buf, size);
+ buf[err] = 0;
if (tbuf[1] != USB_DT_STRING)
dev_dbg(&dev->dev,
@@ -843,6 +876,9 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
}
EXPORT_SYMBOL_GPL(usb_string);
+/* one UTF-8-encoded 16-bit character has at most three bytes */
+#define MAX_USB_STRING_SIZE (127 * 3 + 1)
+
/**
* usb_cache_string - read a string descriptor and cache it for later use
* @udev: the device whose string descriptor is being read
@@ -860,9 +896,9 @@ char *usb_cache_string(struct usb_device *udev, int index)
if (index <= 0)
return NULL;
- buf = kmalloc(256, GFP_KERNEL);
+ buf = kmalloc(MAX_USB_STRING_SIZE, GFP_KERNEL);
if (buf) {
- len = usb_string(udev, index, buf, 256);
+ len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE);
if (len > 0) {
smallbuf = kmalloc(++len, GFP_KERNEL);
if (!smallbuf)
@@ -1664,6 +1700,21 @@ free_interfaces:
if (ret)
goto free_interfaces;
+ /* Make sure we have bandwidth (and available HCD resources) for this
+ * configuration. Remove endpoints from the schedule if we're dropping
+ * this configuration to set configuration 0. After this point, the
+ * host controller will not allow submissions to dropped endpoints. If
+ * this call fails, the device state is unchanged.
+ */
+ if (cp)
+ ret = usb_hcd_check_bandwidth(dev, cp, NULL);
+ else
+ ret = usb_hcd_check_bandwidth(dev, NULL, NULL);
+ if (ret < 0) {
+ usb_autosuspend_device(dev);
+ goto free_interfaces;
+ }
+
/* if it's already configured, clear out old state first.
* getting rid of old interfaces means unbinding their drivers.
*/
@@ -1686,6 +1737,7 @@ free_interfaces:
dev->actconfig = cp;
if (!cp) {
usb_set_device_state(dev, USB_STATE_ADDRESS);
+ usb_hcd_check_bandwidth(dev, NULL, NULL);
usb_autosuspend_device(dev);
goto free_interfaces;
}
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index c6678919792..b5c72e45894 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -552,8 +552,8 @@ static struct attribute *dev_string_attrs[] = {
static mode_t dev_string_attrs_are_visible(struct kobject *kobj,
struct attribute *a, int n)
{
- struct usb_device *udev = to_usb_device(
- container_of(kobj, struct device, kobj));
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct usb_device *udev = to_usb_device(dev);
if (a == &dev_attr_manufacturer.attr) {
if (udev->manufacturer == NULL)
@@ -585,8 +585,8 @@ static ssize_t
read_descriptors(struct kobject *kobj, struct bin_attribute *attr,
char *buf, loff_t off, size_t count)
{
- struct usb_device *udev = to_usb_device(
- container_of(kobj, struct device, kobj));
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct usb_device *udev = to_usb_device(dev);
size_t nleft = count;
size_t srclen, n;
int cfgno;
@@ -786,8 +786,8 @@ static struct attribute *intf_assoc_attrs[] = {
static mode_t intf_assoc_attrs_are_visible(struct kobject *kobj,
struct attribute *a, int n)
{
- struct usb_interface *intf = to_usb_interface(
- container_of(kobj, struct device, kobj));
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct usb_interface *intf = to_usb_interface(dev);
if (intf->intf_assoc == NULL)
return 0;
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 3376055f36e..0885d4abdc6 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -241,6 +241,12 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb);
* If the USB subsystem can't allocate sufficient bandwidth to perform
* the periodic request, submitting such a periodic request should fail.
*
+ * For devices under xHCI, the bandwidth is reserved at configuration time, or
+ * when the alt setting is selected. If there is not enough bus bandwidth, the
+ * configuration/alt setting request will fail. Therefore, submissions to
+ * periodic endpoints on devices under xHCI should never fail due to bandwidth
+ * constraints.
+ *
* Device drivers must explicitly request that repetition, by ensuring that
* some URB is always on the endpoint's queue (except possibly for short
* periods during completion callacks). When there is no longer an urb
@@ -351,6 +357,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
if (xfertype == USB_ENDPOINT_XFER_ISOC) {
int n, len;
+ /* FIXME SuperSpeed isoc endpoints have up to 16 bursts */
/* "high bandwidth" mode, 1-3 packets/uframe? */
if (dev->speed == USB_SPEED_HIGH) {
int mult = 1 + ((max >> 11) & 0x03);
@@ -426,6 +433,11 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
return -EINVAL;
/* too big? */
switch (dev->speed) {
+ case USB_SPEED_SUPER: /* units are 125us */
+ /* Handle up to 2^(16-1) microframes */
+ if (urb->interval > (1 << 15))
+ return -EINVAL;
+ max = 1 << 15;
case USB_SPEED_HIGH: /* units are microframes */
/* NOTE usb handles 2^15 */
if (urb->interval > (1024 * 8))
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 927a27dd2f8..a26f73880c3 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -34,6 +34,7 @@
#include <linux/usb.h>
#include <linux/mutex.h>
#include <linux/workqueue.h>
+#include <linux/debugfs.h>
#include <asm/io.h>
#include <linux/scatterlist.h>
@@ -139,8 +140,7 @@ static int __find_interface(struct device *dev, void *data)
struct find_interface_arg *arg = data;
struct usb_interface *intf;
- /* can't look at usb devices, only interfaces */
- if (is_usb_device(dev))
+ if (!is_usb_interface(dev))
return 0;
intf = to_usb_interface(dev);
@@ -184,11 +184,16 @@ EXPORT_SYMBOL_GPL(usb_find_interface);
static void usb_release_dev(struct device *dev)
{
struct usb_device *udev;
+ struct usb_hcd *hcd;
udev = to_usb_device(dev);
+ hcd = bus_to_hcd(udev->bus);
usb_destroy_configuration(udev);
- usb_put_hcd(bus_to_hcd(udev->bus));
+ /* Root hubs aren't real devices, so don't free HCD resources */
+ if (hcd->driver->free_dev && udev->parent)
+ hcd->driver->free_dev(hcd, udev);
+ usb_put_hcd(hcd);
kfree(udev->product);
kfree(udev->manufacturer);
kfree(udev->serial);
@@ -359,6 +364,13 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
kfree(dev);
return NULL;
}
+ /* Root hubs aren't true devices, so don't allocate HCD resources */
+ if (usb_hcd->driver->alloc_dev && parent &&
+ !usb_hcd->driver->alloc_dev(usb_hcd, dev)) {
+ usb_put_hcd(bus_to_hcd(bus));
+ kfree(dev);
+ return NULL;
+ }
device_initialize(&dev->dev);
dev->dev.bus = &usb_bus_type;
@@ -386,18 +398,24 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
*/
if (unlikely(!parent)) {
dev->devpath[0] = '0';
+ dev->route = 0;
dev->dev.parent = bus->controller;
dev_set_name(&dev->dev, "usb%d", bus->busnum);
root_hub = 1;
} else {
/* match any labeling on the hubs; it's one-based */
- if (parent->devpath[0] == '0')
+ if (parent->devpath[0] == '0') {
snprintf(dev->devpath, sizeof dev->devpath,
"%d", port1);
- else
+ /* Root ports are not counted in route string */
+ dev->route = 0;
+ } else {
snprintf(dev->devpath, sizeof dev->devpath,
"%s.%d", parent->devpath, port1);
+ dev->route = parent->route +
+ (port1 << ((parent->level - 1)*4));
+ }
dev->dev.parent = &parent->dev;
dev_set_name(&dev->dev, "%d-%s", bus->busnum, dev->devpath);
@@ -810,12 +828,12 @@ void usb_buffer_dmasync(struct urb *urb)
return;
if (controller->dma_mask) {
- dma_sync_single(controller,
+ dma_sync_single_for_cpu(controller,
urb->transfer_dma, urb->transfer_buffer_length,
usb_pipein(urb->pipe)
? DMA_FROM_DEVICE : DMA_TO_DEVICE);
if (usb_pipecontrol(urb->pipe))
- dma_sync_single(controller,
+ dma_sync_single_for_cpu(controller,
urb->setup_dma,
sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
@@ -933,8 +951,8 @@ void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
|| !controller->dma_mask)
return;
- dma_sync_sg(controller, sg, n_hw_ents,
- is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ dma_sync_sg_for_cpu(controller, sg, n_hw_ents,
+ is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
EXPORT_SYMBOL_GPL(usb_buffer_dmasync_sg);
#endif
@@ -1012,6 +1030,35 @@ static struct notifier_block usb_bus_nb = {
.notifier_call = usb_bus_notify,
};
+struct dentry *usb_debug_root;
+EXPORT_SYMBOL_GPL(usb_debug_root);
+
+struct dentry *usb_debug_devices;
+
+static int usb_debugfs_init(void)
+{
+ usb_debug_root = debugfs_create_dir("usb", NULL);
+ if (!usb_debug_root)
+ return -ENOENT;
+
+ usb_debug_devices = debugfs_create_file("devices", 0444,
+ usb_debug_root, NULL,
+ &usbfs_devices_fops);
+ if (!usb_debug_devices) {
+ debugfs_remove(usb_debug_root);
+ usb_debug_root = NULL;
+ return -ENOENT;
+ }
+
+ return 0;
+}
+
+static void usb_debugfs_cleanup(void)
+{
+ debugfs_remove(usb_debug_devices);
+ debugfs_remove(usb_debug_root);
+}
+
/*
* Init
*/
@@ -1023,6 +1070,10 @@ static int __init usb_init(void)
return 0;
}
+ retval = usb_debugfs_init();
+ if (retval)
+ goto out;
+
retval = ksuspend_usb_init();
if (retval)
goto out;
@@ -1032,9 +1083,6 @@ static int __init usb_init(void)
retval = bus_register_notifier(&usb_bus_type, &usb_bus_nb);
if (retval)
goto bus_notifier_failed;
- retval = usb_host_init();
- if (retval)
- goto host_init_failed;
retval = usb_major_init();
if (retval)
goto major_init_failed;
@@ -1064,8 +1112,6 @@ usb_devio_init_failed:
driver_register_failed:
usb_major_cleanup();
major_init_failed:
- usb_host_cleanup();
-host_init_failed:
bus_unregister_notifier(&usb_bus_type, &usb_bus_nb);
bus_notifier_failed:
bus_unregister(&usb_bus_type);
@@ -1090,10 +1136,10 @@ static void __exit usb_exit(void)
usb_deregister(&usbfs_driver);
usb_devio_cleanup();
usb_hub_cleanup();
- usb_host_cleanup();
bus_unregister_notifier(&usb_bus_type, &usb_bus_nb);
bus_unregister(&usb_bus_type);
ksuspend_usb_cleanup();
+ usb_debugfs_cleanup();
}
subsys_initcall(usb_init);
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 79d8a9ea559..e2a8cfaade1 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -41,8 +41,6 @@ extern int usb_hub_init(void);
extern void usb_hub_cleanup(void);
extern int usb_major_init(void);
extern void usb_major_cleanup(void);
-extern int usb_host_init(void);
-extern void usb_host_cleanup(void);
#ifdef CONFIG_PM
@@ -106,6 +104,7 @@ extern struct workqueue_struct *ksuspend_usb_wq;
extern struct bus_type usb_bus_type;
extern struct device_type usb_device_type;
extern struct device_type usb_if_device_type;
+extern struct device_type usb_ep_device_type;
extern struct usb_device_driver usb_generic_driver;
static inline int is_usb_device(const struct device *dev)
@@ -113,6 +112,16 @@ static inline int is_usb_device(const struct device *dev)
return dev->type == &usb_device_type;
}
+static inline int is_usb_interface(const struct device *dev)
+{
+ return dev->type == &usb_if_device_type;
+}
+
+static inline int is_usb_endpoint(const struct device *dev)
+{
+ return dev->type == &usb_ep_device_type;
+}
+
/* Do the same for device drivers and interface drivers. */
static inline int is_usb_device_driver(struct device_driver *drv)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 080bb1e4b84..5d1ddf485d1 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -156,7 +156,7 @@ config USB_ATMEL_USBA
config USB_GADGET_FSL_USB2
boolean "Freescale Highspeed USB DR Peripheral Controller"
- depends on FSL_SOC
+ depends on FSL_SOC || ARCH_MXC
select USB_GADGET_DUALSPEED
help
Some of Freescale PowerPC processors have a High Speed
@@ -253,7 +253,7 @@ config USB_PXA25X_SMALL
config USB_GADGET_PXA27X
boolean "PXA 27x"
- depends on ARCH_PXA && PXA27x
+ depends on ARCH_PXA && (PXA27x || PXA3xx)
select USB_OTG_UTILS
help
Intel's PXA 27x series XScale ARM v5TE processors include
@@ -272,6 +272,20 @@ config USB_PXA27X
default USB_GADGET
select USB_GADGET_SELECTED
+config USB_GADGET_S3C_HSOTG
+ boolean "S3C HS/OtG USB Device controller"
+ depends on S3C_DEV_USB_HSOTG
+ select USB_GADGET_S3C_HSOTG_PIO
+ help
+ The Samsung S3C64XX USB2.0 high-speed gadget controller
+ integrated into the S3C64XX series SoC.
+
+config USB_S3C_HSOTG
+ tristate
+ depends on USB_GADGET_S3C_HSOTG
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
config USB_GADGET_S3C2410
boolean "S3C2410 USB Device Controller"
depends on ARCH_S3C2410
@@ -460,6 +474,27 @@ config USB_GOKU
default USB_GADGET
select USB_GADGET_SELECTED
+config USB_GADGET_LANGWELL
+ boolean "Intel Langwell USB Device Controller"
+ depends on PCI
+ select USB_GADGET_DUALSPEED
+ help
+ Intel Langwell USB Device Controller is a High-Speed USB
+ On-The-Go device controller.
+
+ The number of programmable endpoints is different through
+ controller revision.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "langwell_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_LANGWELL
+ tristate
+ depends on USB_GADGET_LANGWELL
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
#
# LAST -- dummy/emulated controller
@@ -566,6 +601,20 @@ config USB_ZERO_HNPTEST
the "B-Peripheral" role, that device will use HNP to let this
one serve as the USB host instead (in the "B-Host" role).
+config USB_AUDIO
+ tristate "Audio Gadget (EXPERIMENTAL)"
+ depends on SND
+ help
+ Gadget Audio is compatible with USB Audio Class specification 1.0.
+ It will include at least one AudioControl interface, zero or more
+ AudioStream interface and zero or more MIDIStream interface.
+
+ Gadget Audio will use on-board ALSA (CONFIG_SND) audio card to
+ playback or capture audio stream.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_audio".
+
config USB_ETH
tristate "Ethernet Gadget (with CDC Ethernet support)"
depends on NET
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 39a51d746cb..e6017e6bf6d 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -18,14 +18,21 @@ obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o
obj-$(CONFIG_USB_AT91) += at91_udc.o
obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o
obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
+fsl_usb2_udc-objs := fsl_udc_core.o
+ifeq ($(CONFIG_ARCH_MXC),y)
+fsl_usb2_udc-objs += fsl_mx3_udc.o
+endif
obj-$(CONFIG_USB_M66592) += m66592-udc.o
obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o
obj-$(CONFIG_USB_CI13XXX) += ci13xxx_udc.o
+obj-$(CONFIG_USB_S3C_HSOTG) += s3c-hsotg.o
+obj-$(CONFIG_USB_LANGWELL) += langwell_udc.o
#
# USB gadget drivers
#
g_zero-objs := zero.o
+g_audio-objs := audio.o
g_ether-objs := ether.o
g_serial-objs := serial.o
g_midi-objs := gmidi.o
@@ -35,6 +42,7 @@ g_printer-objs := printer.o
g_cdc-objs := cdc2.o
obj-$(CONFIG_USB_ZERO) += g_zero.o
+obj-$(CONFIG_USB_AUDIO) += g_audio.o
obj-$(CONFIG_USB_ETH) += g_ether.o
obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o
obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 53bcdd2f828..72bae8f39d8 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -485,7 +485,7 @@ static int at91_ep_enable(struct usb_ep *_ep,
return -ESHUTDOWN;
}
- tmp = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ tmp = usb_endpoint_type(desc);
switch (tmp) {
case USB_ENDPOINT_XFER_CONTROL:
DBG("only one control endpoint\n");
@@ -517,7 +517,7 @@ ok:
local_irq_save(flags);
/* initialize endpoint to match this descriptor */
- ep->is_in = (desc->bEndpointAddress & USB_DIR_IN) != 0;
+ ep->is_in = usb_endpoint_dir_in(desc);
ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC);
ep->stopped = 0;
if (ep->is_in)
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 05c913cc365..4e970cf0e29 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -326,13 +326,7 @@ static int vbus_is_present(struct usba_udc *udc)
return 1;
}
-#if defined(CONFIG_AVR32)
-
-static void toggle_bias(int is_on)
-{
-}
-
-#elif defined(CONFIG_ARCH_AT91)
+#if defined(CONFIG_ARCH_AT91SAM9RL)
#include <mach/at91_pmc.h>
@@ -346,7 +340,13 @@ static void toggle_bias(int is_on)
at91_sys_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN));
}
-#endif /* CONFIG_ARCH_AT91 */
+#else
+
+static void toggle_bias(int is_on)
+{
+}
+
+#endif /* CONFIG_ARCH_AT91SAM9RL */
static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
{
@@ -550,12 +550,12 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
ep->ep.name, ept_cfg, maxpacket);
- if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
+ if (usb_endpoint_dir_in(desc)) {
ep->is_in = 1;
ept_cfg |= USBA_EPT_DIR_IN;
}
- switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ switch (usb_endpoint_type(desc)) {
case USB_ENDPOINT_XFER_CONTROL:
ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL);
ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE);
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
new file mode 100644
index 00000000000..94de7e86461
--- /dev/null
+++ b/drivers/usb/gadget/audio.c
@@ -0,0 +1,302 @@
+/*
+ * audio.c -- Audio gadget driver
+ *
+ * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ * Copyright (C) 2008 Analog Devices, Inc
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+
+#include "u_audio.h"
+
+#define DRIVER_DESC "Linux USB Audio Gadget"
+#define DRIVER_VERSION "Dec 18, 2008"
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Kbuild is not very cooperative with respect to linking separately
+ * compiled library objects into one module. So for now we won't use
+ * separate compilation ... ensuring init/exit sections work to shrink
+ * the runtime footprint, and giving us at least some parts of what
+ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
+ */
+#include "composite.c"
+#include "usbstring.c"
+#include "config.c"
+#include "epautoconf.c"
+
+#include "u_audio.c"
+#include "f_audio.c"
+
+/*-------------------------------------------------------------------------*/
+
+/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
+ * Instead: allocate your own, using normal USB-IF procedures.
+ */
+
+/* Thanks to NetChip Technologies for donating this product ID. */
+#define AUDIO_VENDOR_NUM 0x0525 /* NetChip */
+#define AUDIO_PRODUCT_NUM 0xa4a1 /* Linux-USB Audio Gadget */
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_device_descriptor device_desc = {
+ .bLength = sizeof device_desc,
+ .bDescriptorType = USB_DT_DEVICE,
+
+ .bcdUSB = __constant_cpu_to_le16(0x200),
+
+ .bDeviceClass = USB_CLASS_PER_INTERFACE,
+ .bDeviceSubClass = 0,
+ .bDeviceProtocol = 0,
+ /* .bMaxPacketSize0 = f(hardware) */
+
+ /* Vendor and product id defaults change according to what configs
+ * we support. (As does bNumConfigurations.) These values can
+ * also be overridden by module parameters.
+ */
+ .idVendor = __constant_cpu_to_le16(AUDIO_VENDOR_NUM),
+ .idProduct = __constant_cpu_to_le16(AUDIO_PRODUCT_NUM),
+ /* .bcdDevice = f(hardware) */
+ /* .iManufacturer = DYNAMIC */
+ /* .iProduct = DYNAMIC */
+ /* NO SERIAL NUMBER */
+ .bNumConfigurations = 1,
+};
+
+static struct usb_otg_descriptor otg_descriptor = {
+ .bLength = sizeof otg_descriptor,
+ .bDescriptorType = USB_DT_OTG,
+
+ /* REVISIT SRP-only hardware is possible, although
+ * it would not be called "OTG" ...
+ */
+ .bmAttributes = USB_OTG_SRP | USB_OTG_HNP,
+};
+
+static const struct usb_descriptor_header *otg_desc[] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+ NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * Handle USB audio endpoint set/get command in setup class request
+ */
+
+static int audio_set_endpoint_req(struct usb_configuration *c,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ int value = -EOPNOTSUPP;
+ u16 ep = le16_to_cpu(ctrl->wIndex);
+ u16 len = le16_to_cpu(ctrl->wLength);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+
+ DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, endpoint %d\n",
+ ctrl->bRequest, w_value, len, ep);
+
+ switch (ctrl->bRequest) {
+ case SET_CUR:
+ value = 0;
+ break;
+
+ case SET_MIN:
+ break;
+
+ case SET_MAX:
+ break;
+
+ case SET_RES:
+ break;
+
+ case SET_MEM:
+ break;
+
+ default:
+ break;
+ }
+
+ return value;
+}
+
+static int audio_get_endpoint_req(struct usb_configuration *c,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ int value = -EOPNOTSUPP;
+ u8 ep = ((le16_to_cpu(ctrl->wIndex) >> 8) & 0xFF);
+ u16 len = le16_to_cpu(ctrl->wLength);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+
+ DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, endpoint %d\n",
+ ctrl->bRequest, w_value, len, ep);
+
+ switch (ctrl->bRequest) {
+ case GET_CUR:
+ case GET_MIN:
+ case GET_MAX:
+ case GET_RES:
+ value = 3;
+ break;
+ case GET_MEM:
+ break;
+ default:
+ break;
+ }
+
+ return value;
+}
+
+static int
+audio_setup(struct usb_configuration *c, const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ struct usb_request *req = cdev->req;
+ int value = -EOPNOTSUPP;
+ u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u16 w_length = le16_to_cpu(ctrl->wLength);
+
+ /* composite driver infrastructure handles everything except
+ * Audio class messages; interface activation uses set_alt().
+ */
+ switch (ctrl->bRequestType) {
+ case USB_AUDIO_SET_ENDPOINT:
+ value = audio_set_endpoint_req(c, ctrl);
+ break;
+
+ case USB_AUDIO_GET_ENDPOINT:
+ value = audio_get_endpoint_req(c, ctrl);
+ break;
+
+ default:
+ ERROR(cdev, "Invalid control req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ }
+
+ /* respond with data transfer or status phase? */
+ if (value >= 0) {
+ DBG(cdev, "Audio req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ req->zero = 0;
+ req->length = value;
+ value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+ if (value < 0)
+ ERROR(cdev, "Audio response on err %d\n", value);
+ }
+
+ /* device either stalls (value < 0) or reports success */
+ return value;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int __init audio_do_config(struct usb_configuration *c)
+{
+ /* FIXME alloc iConfiguration string, set it in c->strings */
+
+ if (gadget_is_otg(c->cdev->gadget)) {
+ c->descriptors = otg_desc;
+ c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ }
+
+ audio_bind_config(c);
+
+ return 0;
+}
+
+static struct usb_configuration audio_config_driver = {
+ .label = DRIVER_DESC,
+ .bind = audio_do_config,
+ .setup = audio_setup,
+ .bConfigurationValue = 1,
+ /* .iConfiguration = DYNAMIC */
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init audio_bind(struct usb_composite_dev *cdev)
+{
+ int gcnum;
+ int status;
+
+ gcnum = usb_gadget_controller_number(cdev->gadget);
+ if (gcnum >= 0)
+ device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
+ else {
+ ERROR(cdev, "controller '%s' not recognized; trying %s\n",
+ cdev->gadget->name,
+ audio_config_driver.label);
+ device_desc.bcdDevice =
+ __constant_cpu_to_le16(0x0300 | 0x0099);
+ }
+
+ /* device descriptor strings: manufacturer, product */
+ snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
+ init_utsname()->sysname, init_utsname()->release,
+ cdev->gadget->name);
+ status = usb_string_id(cdev);
+ if (status < 0)
+ goto fail;
+ strings_dev[STRING_MANUFACTURER_IDX].id = status;
+ device_desc.iManufacturer = status;
+
+ status = usb_string_id(cdev);
+ if (status < 0)
+ goto fail;
+ strings_dev[STRING_PRODUCT_IDX].id = status;
+ device_desc.iProduct = status;
+
+ status = usb_add_config(cdev, &audio_config_driver);
+ if (status < 0)
+ goto fail;
+
+ INFO(cdev, "%s, version: %s\n", DRIVER_DESC, DRIVER_VERSION);
+ return 0;
+
+fail:
+ return status;
+}
+
+static int __exit audio_unbind(struct usb_composite_dev *cdev)
+{
+ return 0;
+}
+
+static struct usb_composite_driver audio_driver = {
+ .name = "g_audio",
+ .dev = &device_desc,
+ .strings = audio_strings,
+ .bind = audio_bind,
+ .unbind = __exit_p(audio_unbind),
+};
+
+static int __init init(void)
+{
+ return usb_composite_register(&audio_driver);
+}
+module_init(init);
+
+static void __exit cleanup(void)
+{
+ usb_composite_unregister(&audio_driver);
+}
+module_exit(cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Bryan Wu <cooloney@kernel.org>");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 38e531ecae4..c7cb87a6fee 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -1977,9 +1977,9 @@ static int ep_enable(struct usb_ep *ep,
if (!list_empty(&mEp->qh[mEp->dir].queue))
warn("enabling a non-empty endpoint!");
- mEp->dir = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? TX : RX;
- mEp->num = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
- mEp->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ mEp->dir = usb_endpoint_dir_in(desc) ? TX : RX;
+ mEp->num = usb_endpoint_num(desc);
+ mEp->type = usb_endpoint_type(desc);
mEp->ep.maxpacket = __constant_le16_to_cpu(desc->wMaxPacketSize);
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
new file mode 100644
index 00000000000..66527ba2d2e
--- /dev/null
+++ b/drivers/usb/gadget/f_audio.c
@@ -0,0 +1,707 @@
+/*
+ * f_audio.c -- USB Audio class function driver
+ *
+ * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ * Copyright (C) 2008 Analog Devices, Inc
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <asm/atomic.h>
+
+#include "u_audio.h"
+
+#define OUT_EP_MAX_PACKET_SIZE 200
+static int req_buf_size = OUT_EP_MAX_PACKET_SIZE;
+module_param(req_buf_size, int, S_IRUGO);
+MODULE_PARM_DESC(req_buf_size, "ISO OUT endpoint request buffer size");
+
+static int req_count = 256;
+module_param(req_count, int, S_IRUGO);
+MODULE_PARM_DESC(req_count, "ISO OUT endpoint request count");
+
+static int audio_buf_size = 48000;
+module_param(audio_buf_size, int, S_IRUGO);
+MODULE_PARM_DESC(audio_buf_size, "Audio buffer size");
+
+/*
+ * DESCRIPTORS ... most are static, but strings and full
+ * configuration descriptors are built on demand.
+ */
+
+/*
+ * We have two interfaces- AudioControl and AudioStreaming
+ * TODO: only supcard playback currently
+ */
+#define F_AUDIO_AC_INTERFACE 0
+#define F_AUDIO_AS_INTERFACE 1
+#define F_AUDIO_NUM_INTERFACES 2
+
+/* B.3.1 Standard AC Interface Descriptor */
+static struct usb_interface_descriptor ac_interface_desc __initdata = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bNumEndpoints = 0,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
+};
+
+DECLARE_USB_AC_HEADER_DESCRIPTOR(2);
+
+#define USB_DT_AC_HEADER_LENGH USB_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES)
+/* B.3.2 Class-Specific AC Interface Descriptor */
+static struct usb_ac_header_descriptor_2 ac_header_desc = {
+ .bLength = USB_DT_AC_HEADER_LENGH,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = HEADER,
+ .bcdADC = __constant_cpu_to_le16(0x0100),
+ .wTotalLength = __constant_cpu_to_le16(USB_DT_AC_HEADER_LENGH),
+ .bInCollection = F_AUDIO_NUM_INTERFACES,
+ .baInterfaceNr = {
+ [0] = F_AUDIO_AC_INTERFACE,
+ [1] = F_AUDIO_AS_INTERFACE,
+ }
+};
+
+#define INPUT_TERMINAL_ID 1
+static struct usb_input_terminal_descriptor input_terminal_desc = {
+ .bLength = USB_DT_AC_INPUT_TERMINAL_SIZE,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = INPUT_TERMINAL,
+ .bTerminalID = INPUT_TERMINAL_ID,
+ .wTerminalType = USB_AC_TERMINAL_STREAMING,
+ .bAssocTerminal = 0,
+ .wChannelConfig = 0x3,
+};
+
+DECLARE_USB_AC_FEATURE_UNIT_DESCRIPTOR(0);
+
+#define FEATURE_UNIT_ID 2
+static struct usb_ac_feature_unit_descriptor_0 feature_unit_desc = {
+ .bLength = USB_DT_AC_FEATURE_UNIT_SIZE(0),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = FEATURE_UNIT,
+ .bUnitID = FEATURE_UNIT_ID,
+ .bSourceID = INPUT_TERMINAL_ID,
+ .bControlSize = 2,
+ .bmaControls[0] = (FU_MUTE | FU_VOLUME),
+};
+
+static struct usb_audio_control mute_control = {
+ .list = LIST_HEAD_INIT(mute_control.list),
+ .name = "Mute Control",
+ .type = MUTE_CONTROL,
+ /* Todo: add real Mute control code */
+ .set = generic_set_cmd,
+ .get = generic_get_cmd,
+};
+
+static struct usb_audio_control volume_control = {
+ .list = LIST_HEAD_INIT(volume_control.list),
+ .name = "Volume Control",
+ .type = VOLUME_CONTROL,
+ /* Todo: add real Volume control code */
+ .set = generic_set_cmd,
+ .get = generic_get_cmd,
+};
+
+static struct usb_audio_control_selector feature_unit = {
+ .list = LIST_HEAD_INIT(feature_unit.list),
+ .id = FEATURE_UNIT_ID,
+ .name = "Mute & Volume Control",
+ .type = FEATURE_UNIT,
+ .desc = (struct usb_descriptor_header *)&feature_unit_desc,
+};
+
+#define OUTPUT_TERMINAL_ID 3
+static struct usb_output_terminal_descriptor output_terminal_desc = {
+ .bLength = USB_DT_AC_OUTPUT_TERMINAL_SIZE,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = OUTPUT_TERMINAL,
+ .bTerminalID = OUTPUT_TERMINAL_ID,
+ .wTerminalType = USB_AC_OUTPUT_TERMINAL_SPEAKER,
+ .bAssocTerminal = FEATURE_UNIT_ID,
+ .bSourceID = FEATURE_UNIT_ID,
+};
+
+/* B.4.1 Standard AS Interface Descriptor */
+static struct usb_interface_descriptor as_interface_alt_0_desc = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 0,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOSTREAMING,
+};
+
+static struct usb_interface_descriptor as_interface_alt_1_desc = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bAlternateSetting = 1,
+ .bNumEndpoints = 1,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOSTREAMING,
+};
+
+/* B.4.2 Class-Specific AS Interface Descriptor */
+static struct usb_as_header_descriptor as_header_desc = {
+ .bLength = USB_DT_AS_HEADER_SIZE,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = AS_GENERAL,
+ .bTerminalLink = INPUT_TERMINAL_ID,
+ .bDelay = 1,
+ .wFormatTag = USB_AS_AUDIO_FORMAT_TYPE_I_PCM,
+};
+
+DECLARE_USB_AS_FORMAT_TYPE_I_DISCRETE_DESC(1);
+
+static struct usb_as_formate_type_i_discrete_descriptor_1 as_type_i_desc = {
+ .bLength = USB_AS_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(1),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = FORMAT_TYPE,
+ .bFormatType = USB_AS_FORMAT_TYPE_I,
+ .bSubframeSize = 2,
+ .bBitResolution = 16,
+ .bSamFreqType = 1,
+};
+
+/* Standard ISO OUT Endpoint Descriptor */
+static struct usb_endpoint_descriptor as_out_ep_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_AUDIO_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_AS_ENDPOINT_ADAPTIVE
+ | USB_ENDPOINT_XFER_ISOC,
+ .wMaxPacketSize = __constant_cpu_to_le16(OUT_EP_MAX_PACKET_SIZE),
+ .bInterval = 4,
+};
+
+/* Class-specific AS ISO OUT Endpoint Descriptor */
+static struct usb_as_iso_endpoint_descriptor as_iso_out_desc __initdata = {
+ .bLength = USB_AS_ISO_ENDPOINT_DESC_SIZE,
+ .bDescriptorType = USB_DT_CS_ENDPOINT,
+ .bDescriptorSubtype = EP_GENERAL,
+ .bmAttributes = 1,
+ .bLockDelayUnits = 1,
+ .wLockDelay = __constant_cpu_to_le16(1),
+};
+
+static struct usb_descriptor_header *f_audio_desc[] __initdata = {
+ (struct usb_descriptor_header *)&ac_interface_desc,
+ (struct usb_descriptor_header *)&ac_header_desc,
+
+ (struct usb_descriptor_header *)&input_terminal_desc,
+ (struct usb_descriptor_header *)&output_terminal_desc,
+ (struct usb_descriptor_header *)&feature_unit_desc,
+
+ (struct usb_descriptor_header *)&as_interface_alt_0_desc,
+ (struct usb_descriptor_header *)&as_interface_alt_1_desc,
+ (struct usb_descriptor_header *)&as_header_desc,
+
+ (struct usb_descriptor_header *)&as_type_i_desc,
+
+ (struct usb_descriptor_header *)&as_out_ep_desc,
+ (struct usb_descriptor_header *)&as_iso_out_desc,
+ NULL,
+};
+
+/* string IDs are assigned dynamically */
+
+#define STRING_MANUFACTURER_IDX 0
+#define STRING_PRODUCT_IDX 1
+
+static char manufacturer[50];
+
+static struct usb_string strings_dev[] = {
+ [STRING_MANUFACTURER_IDX].s = manufacturer,
+ [STRING_PRODUCT_IDX].s = DRIVER_DESC,
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+ .language = 0x0409, /* en-us */
+ .strings = strings_dev,
+};
+
+static struct usb_gadget_strings *audio_strings[] = {
+ &stringtab_dev,
+ NULL,
+};
+
+/*
+ * This function is an ALSA sound card following USB Audio Class Spec 1.0.
+ */
+
+/*-------------------------------------------------------------------------*/
+struct f_audio_buf {
+ u8 *buf;
+ int actual;
+ struct list_head list;
+};
+
+static struct f_audio_buf *f_audio_buffer_alloc(int buf_size)
+{
+ struct f_audio_buf *copy_buf;
+
+ copy_buf = kzalloc(sizeof *copy_buf, GFP_ATOMIC);
+ if (!copy_buf)
+ return (struct f_audio_buf *)-ENOMEM;
+
+ copy_buf->buf = kzalloc(buf_size, GFP_ATOMIC);
+ if (!copy_buf->buf) {
+ kfree(copy_buf);
+ return (struct f_audio_buf *)-ENOMEM;
+ }
+
+ return copy_buf;
+}
+
+static void f_audio_buffer_free(struct f_audio_buf *audio_buf)
+{
+ kfree(audio_buf->buf);
+ kfree(audio_buf);
+}
+/*-------------------------------------------------------------------------*/
+
+struct f_audio {
+ struct gaudio card;
+
+ /* endpoints handle full and/or high speeds */
+ struct usb_ep *out_ep;
+ struct usb_endpoint_descriptor *out_desc;
+
+ spinlock_t lock;
+ struct f_audio_buf *copy_buf;
+ struct work_struct playback_work;
+ struct list_head play_queue;
+
+ /* Control Set command */
+ struct list_head cs;
+ u8 set_cmd;
+ struct usb_audio_control *set_con;
+};
+
+static inline struct f_audio *func_to_audio(struct usb_function *f)
+{
+ return container_of(f, struct f_audio, card.func);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void f_audio_playback_work(struct work_struct *data)
+{
+ struct f_audio *audio = container_of(data, struct f_audio,
+ playback_work);
+ struct f_audio_buf *play_buf;
+
+ spin_lock_irq(&audio->lock);
+ if (list_empty(&audio->play_queue)) {
+ spin_unlock_irq(&audio->lock);
+ return;
+ }
+ play_buf = list_first_entry(&audio->play_queue,
+ struct f_audio_buf, list);
+ list_del(&play_buf->list);
+ spin_unlock_irq(&audio->lock);
+
+ u_audio_playback(&audio->card, play_buf->buf, play_buf->actual);
+ f_audio_buffer_free(play_buf);
+
+ return;
+}
+
+static int f_audio_out_ep_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct f_audio *audio = req->context;
+ struct usb_composite_dev *cdev = audio->card.func.config->cdev;
+ struct f_audio_buf *copy_buf = audio->copy_buf;
+ int err;
+
+ if (!copy_buf)
+ return -EINVAL;
+
+ /* Copy buffer is full, add it to the play_queue */
+ if (audio_buf_size - copy_buf->actual < req->actual) {
+ list_add_tail(&copy_buf->list, &audio->play_queue);
+ schedule_work(&audio->playback_work);
+ copy_buf = f_audio_buffer_alloc(audio_buf_size);
+ if (copy_buf < 0)
+ return -ENOMEM;
+ }
+
+ memcpy(copy_buf->buf + copy_buf->actual, req->buf, req->actual);
+ copy_buf->actual += req->actual;
+ audio->copy_buf = copy_buf;
+
+ err = usb_ep_queue(ep, req, GFP_ATOMIC);
+ if (err)
+ ERROR(cdev, "%s queue req: %d\n", ep->name, err);
+
+ return 0;
+
+}
+
+static void f_audio_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct f_audio *audio = req->context;
+ int status = req->status;
+ u32 data = 0;
+ struct usb_ep *out_ep = audio->out_ep;
+
+ switch (status) {
+
+ case 0: /* normal completion? */
+ if (ep == out_ep)
+ f_audio_out_ep_complete(ep, req);
+ else if (audio->set_con) {
+ memcpy(&data, req->buf, req->length);
+ audio->set_con->set(audio->set_con, audio->set_cmd,
+ le16_to_cpu(data));
+ audio->set_con = NULL;
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+static int audio_set_intf_req(struct usb_function *f,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct f_audio *audio = func_to_audio(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+ struct usb_request *req = cdev->req;
+ u8 id = ((le16_to_cpu(ctrl->wIndex) >> 8) & 0xFF);
+ u16 len = le16_to_cpu(ctrl->wLength);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u8 con_sel = (w_value >> 8) & 0xFF;
+ u8 cmd = (ctrl->bRequest & 0x0F);
+ struct usb_audio_control_selector *cs;
+ struct usb_audio_control *con;
+
+ DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, entity %d\n",
+ ctrl->bRequest, w_value, len, id);
+
+ list_for_each_entry(cs, &audio->cs, list) {
+ if (cs->id == id) {
+ list_for_each_entry(con, &cs->control, list) {
+ if (con->type == con_sel) {
+ audio->set_con = con;
+ break;
+ }
+ }
+ break;
+ }
+ }
+
+ audio->set_cmd = cmd;
+ req->context = audio;
+ req->complete = f_audio_complete;
+
+ return len;
+}
+
+static int audio_get_intf_req(struct usb_function *f,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct f_audio *audio = func_to_audio(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+ struct usb_request *req = cdev->req;
+ int value = -EOPNOTSUPP;
+ u8 id = ((le16_to_cpu(ctrl->wIndex) >> 8) & 0xFF);
+ u16 len = le16_to_cpu(ctrl->wLength);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u8 con_sel = (w_value >> 8) & 0xFF;
+ u8 cmd = (ctrl->bRequest & 0x0F);
+ struct usb_audio_control_selector *cs;
+ struct usb_audio_control *con;
+
+ DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, entity %d\n",
+ ctrl->bRequest, w_value, len, id);
+
+ list_for_each_entry(cs, &audio->cs, list) {
+ if (cs->id == id) {
+ list_for_each_entry(con, &cs->control, list) {
+ if (con->type == con_sel && con->get) {
+ value = con->get(con, cmd);
+ break;
+ }
+ }
+ break;
+ }
+ }
+
+ req->context = audio;
+ req->complete = f_audio_complete;
+ memcpy(req->buf, &value, len);
+
+ return len;
+}
+
+static int
+f_audio_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_composite_dev *cdev = f->config->cdev;
+ struct usb_request *req = cdev->req;
+ int value = -EOPNOTSUPP;
+ u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u16 w_length = le16_to_cpu(ctrl->wLength);
+
+ /* composite driver infrastructure handles everything except
+ * Audio class messages; interface activation uses set_alt().
+ */
+ switch (ctrl->bRequestType) {
+ case USB_AUDIO_SET_INTF:
+ value = audio_set_intf_req(f, ctrl);
+ break;
+
+ case USB_AUDIO_GET_INTF:
+ value = audio_get_intf_req(f, ctrl);
+ break;
+
+ default:
+ ERROR(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ }
+
+ /* respond with data transfer or status phase? */
+ if (value >= 0) {
+ DBG(cdev, "audio req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ req->zero = 0;
+ req->length = value;
+ value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+ if (value < 0)
+ ERROR(cdev, "audio response on err %d\n", value);
+ }
+
+ /* device either stalls (value < 0) or reports success */
+ return value;
+}
+
+static int f_audio_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+ struct f_audio *audio = func_to_audio(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+ struct usb_ep *out_ep = audio->out_ep;
+ struct usb_request *req;
+ int i = 0, err = 0;
+
+ DBG(cdev, "intf %d, alt %d\n", intf, alt);
+
+ if (intf == 1) {
+ if (alt == 1) {
+ usb_ep_enable(out_ep, audio->out_desc);
+ out_ep->driver_data = audio;
+ audio->copy_buf = f_audio_buffer_alloc(audio_buf_size);
+
+ /*
+ * allocate a bunch of read buffers
+ * and queue them all at once.
+ */
+ for (i = 0; i < req_count && err == 0; i++) {
+ req = usb_ep_alloc_request(out_ep, GFP_ATOMIC);
+ if (req) {
+ req->buf = kzalloc(req_buf_size,
+ GFP_ATOMIC);
+ if (req->buf) {
+ req->length = req_buf_size;
+ req->context = audio;
+ req->complete =
+ f_audio_complete;
+ err = usb_ep_queue(out_ep,
+ req, GFP_ATOMIC);
+ if (err)
+ ERROR(cdev,
+ "%s queue req: %d\n",
+ out_ep->name, err);
+ } else
+ err = -ENOMEM;
+ } else
+ err = -ENOMEM;
+ }
+
+ } else {
+ struct f_audio_buf *copy_buf = audio->copy_buf;
+ if (copy_buf) {
+ list_add_tail(&copy_buf->list,
+ &audio->play_queue);
+ schedule_work(&audio->playback_work);
+ }
+ }
+ }
+
+ return err;
+}
+
+static void f_audio_disable(struct usb_function *f)
+{
+ return;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void f_audio_build_desc(struct f_audio *audio)
+{
+ struct gaudio *card = &audio->card;
+ u8 *sam_freq;
+ int rate;
+
+ /* Set channel numbers */
+ input_terminal_desc.bNrChannels = u_audio_get_playback_channels(card);
+ as_type_i_desc.bNrChannels = u_audio_get_playback_channels(card);
+
+ /* Set sample rates */
+ rate = u_audio_get_playback_rate(card);
+ sam_freq = as_type_i_desc.tSamFreq[0];
+ memcpy(sam_freq, &rate, 3);
+
+ /* Todo: Set Sample bits and other parameters */
+
+ return;
+}
+
+/* audio function driver setup/binding */
+static int __init
+f_audio_bind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ struct f_audio *audio = func_to_audio(f);
+ int status;
+ struct usb_ep *ep;
+
+ f_audio_build_desc(audio);
+
+ /* allocate instance-specific interface IDs, and patch descriptors */
+ status = usb_interface_id(c, f);
+ if (status < 0)
+ goto fail;
+ ac_interface_desc.bInterfaceNumber = status;
+
+ status = usb_interface_id(c, f);
+ if (status < 0)
+ goto fail;
+ as_interface_alt_0_desc.bInterfaceNumber = status;
+ as_interface_alt_1_desc.bInterfaceNumber = status;
+
+ status = -ENODEV;
+
+ /* allocate instance-specific endpoints */
+ ep = usb_ep_autoconfig(cdev->gadget, &as_out_ep_desc);
+ if (!ep)
+ goto fail;
+ audio->out_ep = ep;
+ ep->driver_data = cdev; /* claim */
+
+ status = -ENOMEM;
+
+ /* supcard all relevant hardware speeds... we expect that when
+ * hardware is dual speed, all bulk-capable endpoints work at
+ * both speeds
+ */
+
+ /* copy descriptors, and track endpoint copies */
+ if (gadget_is_dualspeed(c->cdev->gadget)) {
+ c->highspeed = true;
+ f->hs_descriptors = usb_copy_descriptors(f_audio_desc);
+ } else
+ f->descriptors = usb_copy_descriptors(f_audio_desc);
+
+ return 0;
+
+fail:
+
+ return status;
+}
+
+static void
+f_audio_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct f_audio *audio = func_to_audio(f);
+
+ usb_free_descriptors(f->descriptors);
+ kfree(audio);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Todo: add more control selecotor dynamically */
+int __init control_selector_init(struct f_audio *audio)
+{
+ INIT_LIST_HEAD(&audio->cs);
+ list_add(&feature_unit.list, &audio->cs);
+
+ INIT_LIST_HEAD(&feature_unit.control);
+ list_add(&mute_control.list, &feature_unit.control);
+ list_add(&volume_control.list, &feature_unit.control);
+
+ volume_control.data[_CUR] = 0xffc0;
+ volume_control.data[_MIN] = 0xe3a0;
+ volume_control.data[_MAX] = 0xfff0;
+ volume_control.data[_RES] = 0x0030;
+
+ return 0;
+}
+
+/**
+ * audio_bind_config - add USB audio fucntion to a configuration
+ * @c: the configuration to supcard the USB audio function
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ */
+int __init audio_bind_config(struct usb_configuration *c)
+{
+ struct f_audio *audio;
+ int status;
+
+ /* allocate and initialize one new instance */
+ audio = kzalloc(sizeof *audio, GFP_KERNEL);
+ if (!audio)
+ return -ENOMEM;
+
+ audio->card.func.name = "g_audio";
+ audio->card.gadget = c->cdev->gadget;
+
+ INIT_LIST_HEAD(&audio->play_queue);
+ spin_lock_init(&audio->lock);
+
+ /* set up ASLA audio devices */
+ status = gaudio_setup(&audio->card);
+ if (status < 0)
+ goto setup_fail;
+
+ audio->card.func.strings = audio_strings;
+ audio->card.func.bind = f_audio_bind;
+ audio->card.func.unbind = f_audio_unbind;
+ audio->card.func.set_alt = f_audio_set_alt;
+ audio->card.func.setup = f_audio_setup;
+ audio->card.func.disable = f_audio_disable;
+ audio->out_desc = &as_out_ep_desc;
+
+ control_selector_init(audio);
+
+ INIT_WORK(&audio->playback_work, f_audio_playback_work);
+
+ status = usb_add_function(c, &audio->card.func);
+ if (status)
+ goto add_fail;
+
+ INFO(c->cdev, "audio_buf_size %d, req_buf_size %d, req_count %d\n",
+ audio_buf_size, req_buf_size, req_count);
+
+ return status;
+
+add_fail:
+ gaudio_cleanup(&audio->card);
+setup_fail:
+ kfree(audio);
+ return status;
+}
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 3279a472604..424a37c5773 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -475,7 +475,9 @@ static int rndis_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
if (rndis->port.in_ep->driver_data) {
DBG(cdev, "reset rndis\n");
gether_disconnect(&rndis->port);
- } else {
+ }
+
+ if (!rndis->port.in) {
DBG(cdev, "init rndis\n");
rndis->port.in = ep_choose(cdev->gadget,
rndis->hs.in, rndis->fs.in);
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 381a53b3e11..1e6aa504d58 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -248,6 +248,8 @@
#include <linux/freezer.h>
#include <linux/utsname.h>
+#include <asm/unaligned.h>
+
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
@@ -799,29 +801,9 @@ static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
/* Routines for unaligned data access */
-static u16 get_be16(u8 *buf)
-{
- return ((u16) buf[0] << 8) | ((u16) buf[1]);
-}
-
-static u32 get_be32(u8 *buf)
-{
- return ((u32) buf[0] << 24) | ((u32) buf[1] << 16) |
- ((u32) buf[2] << 8) | ((u32) buf[3]);
-}
-
-static void put_be16(u8 *buf, u16 val)
-{
- buf[0] = val >> 8;
- buf[1] = val;
-}
-
-static void put_be32(u8 *buf, u32 val)
+static u32 get_unaligned_be24(u8 *buf)
{
- buf[0] = val >> 24;
- buf[1] = val >> 16;
- buf[2] = val >> 8;
- buf[3] = val & 0xff;
+ return 0xffffff & (u32) get_unaligned_be32(buf - 1);
}
@@ -1582,9 +1564,9 @@ static int do_read(struct fsg_dev *fsg)
/* Get the starting Logical Block Address and check that it's
* not too big */
if (fsg->cmnd[0] == SC_READ_6)
- lba = (fsg->cmnd[1] << 16) | get_be16(&fsg->cmnd[2]);
+ lba = get_unaligned_be24(&fsg->cmnd[1]);
else {
- lba = get_be32(&fsg->cmnd[2]);
+ lba = get_unaligned_be32(&fsg->cmnd[2]);
/* We allow DPO (Disable Page Out = don't save data in the
* cache) and FUA (Force Unit Access = don't read from the
@@ -1717,9 +1699,9 @@ static int do_write(struct fsg_dev *fsg)
/* Get the starting Logical Block Address and check that it's
* not too big */
if (fsg->cmnd[0] == SC_WRITE_6)
- lba = (fsg->cmnd[1] << 16) | get_be16(&fsg->cmnd[2]);
+ lba = get_unaligned_be24(&fsg->cmnd[1]);
else {
- lba = get_be32(&fsg->cmnd[2]);
+ lba = get_unaligned_be32(&fsg->cmnd[2]);
/* We allow DPO (Disable Page Out = don't save data in the
* cache) and FUA (Force Unit Access = write directly to the
@@ -1940,7 +1922,7 @@ static int do_verify(struct fsg_dev *fsg)
/* Get the starting Logical Block Address and check that it's
* not too big */
- lba = get_be32(&fsg->cmnd[2]);
+ lba = get_unaligned_be32(&fsg->cmnd[2]);
if (lba >= curlun->num_sectors) {
curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
return -EINVAL;
@@ -1953,7 +1935,7 @@ static int do_verify(struct fsg_dev *fsg)
return -EINVAL;
}
- verification_length = get_be16(&fsg->cmnd[7]);
+ verification_length = get_unaligned_be16(&fsg->cmnd[7]);
if (unlikely(verification_length == 0))
return -EIO; // No default reply
@@ -2103,7 +2085,7 @@ static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
memset(buf, 0, 18);
buf[0] = valid | 0x70; // Valid, current error
buf[2] = SK(sd);
- put_be32(&buf[3], sdinfo); // Sense information
+ put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */
buf[7] = 18 - 8; // Additional sense length
buf[12] = ASC(sd);
buf[13] = ASCQ(sd);
@@ -2114,7 +2096,7 @@ static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
{
struct lun *curlun = fsg->curlun;
- u32 lba = get_be32(&fsg->cmnd[2]);
+ u32 lba = get_unaligned_be32(&fsg->cmnd[2]);
int pmi = fsg->cmnd[8];
u8 *buf = (u8 *) bh->buf;
@@ -2124,8 +2106,9 @@ static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
return -EINVAL;
}
- put_be32(&buf[0], curlun->num_sectors - 1); // Max logical block
- put_be32(&buf[4], 512); // Block length
+ put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
+ /* Max logical block */
+ put_unaligned_be32(512, &buf[4]); /* Block length */
return 8;
}
@@ -2144,7 +2127,7 @@ static void store_cdrom_address(u8 *dest, int msf, u32 addr)
dest[0] = 0; /* Reserved */
} else {
/* Absolute sector */
- put_be32(dest, addr);
+ put_unaligned_be32(addr, dest);
}
}
@@ -2152,7 +2135,7 @@ static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh)
{
struct lun *curlun = fsg->curlun;
int msf = fsg->cmnd[1] & 0x02;
- u32 lba = get_be32(&fsg->cmnd[2]);
+ u32 lba = get_unaligned_be32(&fsg->cmnd[2]);
u8 *buf = (u8 *) bh->buf;
if ((fsg->cmnd[1] & ~0x02) != 0) { /* Mask away MSF */
@@ -2252,10 +2235,13 @@ static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
buf[2] = 0x04; // Write cache enable,
// Read cache not disabled
// No cache retention priorities
- put_be16(&buf[4], 0xffff); // Don't disable prefetch
- // Minimum prefetch = 0
- put_be16(&buf[8], 0xffff); // Maximum prefetch
- put_be16(&buf[10], 0xffff); // Maximum prefetch ceiling
+ put_unaligned_be16(0xffff, &buf[4]);
+ /* Don't disable prefetch */
+ /* Minimum prefetch = 0 */
+ put_unaligned_be16(0xffff, &buf[8]);
+ /* Maximum prefetch */
+ put_unaligned_be16(0xffff, &buf[10]);
+ /* Maximum prefetch ceiling */
}
buf += 12;
}
@@ -2272,7 +2258,7 @@ static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
if (mscmnd == SC_MODE_SENSE_6)
buf0[0] = len - 1;
else
- put_be16(buf0, len - 2);
+ put_unaligned_be16(len - 2, buf0);
return len;
}
@@ -2360,9 +2346,10 @@ static int do_read_format_capacities(struct fsg_dev *fsg,
buf[3] = 8; // Only the Current/Maximum Capacity Descriptor
buf += 4;
- put_be32(&buf[0], curlun->num_sectors); // Number of blocks
- put_be32(&buf[4], 512); // Block length
- buf[4] = 0x02; // Current capacity
+ put_unaligned_be32(curlun->num_sectors, &buf[0]);
+ /* Number of blocks */
+ put_unaligned_be32(512, &buf[4]); /* Block length */
+ buf[4] = 0x02; /* Current capacity */
return 12;
}
@@ -2882,7 +2869,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
break;
case SC_MODE_SELECT_10:
- fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
(1<<1) | (3<<7), 0,
"MODE SELECT(10)")) == 0)
@@ -2898,7 +2885,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
break;
case SC_MODE_SENSE_10:
- fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
(1<<1) | (1<<2) | (3<<7), 0,
"MODE SENSE(10)")) == 0)
@@ -2923,7 +2910,8 @@ static int do_scsi_command(struct fsg_dev *fsg)
break;
case SC_READ_10:
- fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]) << 9;
+ fsg->data_size_from_cmnd =
+ get_unaligned_be16(&fsg->cmnd[7]) << 9;
if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
(1<<1) | (0xf<<2) | (3<<7), 1,
"READ(10)")) == 0)
@@ -2931,7 +2919,8 @@ static int do_scsi_command(struct fsg_dev *fsg)
break;
case SC_READ_12:
- fsg->data_size_from_cmnd = get_be32(&fsg->cmnd[6]) << 9;
+ fsg->data_size_from_cmnd =
+ get_unaligned_be32(&fsg->cmnd[6]) << 9;
if ((reply = check_command(fsg, 12, DATA_DIR_TO_HOST,
(1<<1) | (0xf<<2) | (0xf<<6), 1,
"READ(12)")) == 0)
@@ -2949,7 +2938,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
case SC_READ_HEADER:
if (!mod_data.cdrom)
goto unknown_cmnd;
- fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
(3<<7) | (0x1f<<1), 1,
"READ HEADER")) == 0)
@@ -2959,7 +2948,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
case SC_READ_TOC:
if (!mod_data.cdrom)
goto unknown_cmnd;
- fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
(7<<6) | (1<<1), 1,
"READ TOC")) == 0)
@@ -2967,7 +2956,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
break;
case SC_READ_FORMAT_CAPACITIES:
- fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
(3<<7), 1,
"READ FORMAT CAPACITIES")) == 0)
@@ -3025,7 +3014,8 @@ static int do_scsi_command(struct fsg_dev *fsg)
break;
case SC_WRITE_10:
- fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]) << 9;
+ fsg->data_size_from_cmnd =
+ get_unaligned_be16(&fsg->cmnd[7]) << 9;
if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
(1<<1) | (0xf<<2) | (3<<7), 1,
"WRITE(10)")) == 0)
@@ -3033,7 +3023,8 @@ static int do_scsi_command(struct fsg_dev *fsg)
break;
case SC_WRITE_12:
- fsg->data_size_from_cmnd = get_be32(&fsg->cmnd[6]) << 9;
+ fsg->data_size_from_cmnd =
+ get_unaligned_be32(&fsg->cmnd[6]) << 9;
if ((reply = check_command(fsg, 12, DATA_DIR_FROM_HOST,
(1<<1) | (0xf<<2) | (0xf<<6), 1,
"WRITE(12)")) == 0)
diff --git a/drivers/usb/gadget/fsl_mx3_udc.c b/drivers/usb/gadget/fsl_mx3_udc.c
new file mode 100644
index 00000000000..4bc2bf3d602
--- /dev/null
+++ b/drivers/usb/gadget/fsl_mx3_udc.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Description:
+ * Helper routines for i.MX3x SoCs from Freescale, needed by the fsl_usb2_udc.c
+ * driver to function correctly on these systems.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fsl_devices.h>
+#include <linux/platform_device.h>
+
+static struct clk *mxc_ahb_clk;
+static struct clk *mxc_usb_clk;
+
+int fsl_udc_clk_init(struct platform_device *pdev)
+{
+ struct fsl_usb2_platform_data *pdata;
+ unsigned long freq;
+ int ret;
+
+ pdata = pdev->dev.platform_data;
+
+ mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
+ if (IS_ERR(mxc_ahb_clk))
+ return PTR_ERR(mxc_ahb_clk);
+
+ ret = clk_enable(mxc_ahb_clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
+ goto eenahb;
+ }
+
+ /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
+ mxc_usb_clk = clk_get(&pdev->dev, "usb");
+ if (IS_ERR(mxc_usb_clk)) {
+ dev_err(&pdev->dev, "clk_get(\"usb\") failed\n");
+ ret = PTR_ERR(mxc_usb_clk);
+ goto egusb;
+ }
+
+ freq = clk_get_rate(mxc_usb_clk);
+ if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
+ (freq < 59999000 || freq > 60001000)) {
+ dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
+ goto eclkrate;
+ }
+
+ ret = clk_enable(mxc_usb_clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n");
+ goto eenusb;
+ }
+
+ return 0;
+
+eenusb:
+eclkrate:
+ clk_put(mxc_usb_clk);
+ mxc_usb_clk = NULL;
+egusb:
+ clk_disable(mxc_ahb_clk);
+eenahb:
+ clk_put(mxc_ahb_clk);
+ return ret;
+}
+
+void fsl_udc_clk_finalize(struct platform_device *pdev)
+{
+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+
+ /* ULPI transceivers don't need usbpll */
+ if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
+ clk_disable(mxc_usb_clk);
+ clk_put(mxc_usb_clk);
+ mxc_usb_clk = NULL;
+ }
+}
+
+void fsl_udc_clk_release(void)
+{
+ if (mxc_usb_clk) {
+ clk_disable(mxc_usb_clk);
+ clk_put(mxc_usb_clk);
+ }
+ clk_disable(mxc_ahb_clk);
+ clk_put(mxc_ahb_clk);
+}
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_udc_core.c
index 9d7b95d4e3d..42a74b8a0bb 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -38,6 +38,7 @@
#include <linux/platform_device.h>
#include <linux/fsl_devices.h>
#include <linux/dmapool.h>
+#include <linux/delay.h>
#include <asm/byteorder.h>
#include <asm/io.h>
@@ -57,7 +58,9 @@ static const char driver_name[] = "fsl-usb2-udc";
static const char driver_desc[] = DRIVER_DESC;
static struct usb_dr_device *dr_regs;
+#ifndef CONFIG_ARCH_MXC
static struct usb_sys_interface *usb_sys_regs;
+#endif
/* it is initialized in probe() */
static struct fsl_udc *udc_controller = NULL;
@@ -174,10 +177,34 @@ static void nuke(struct fsl_ep *ep, int status)
static int dr_controller_setup(struct fsl_udc *udc)
{
- unsigned int tmp = 0, portctrl = 0, ctrl = 0;
+ unsigned int tmp, portctrl;
+#ifndef CONFIG_ARCH_MXC
+ unsigned int ctrl;
+#endif
unsigned long timeout;
#define FSL_UDC_RESET_TIMEOUT 1000
+ /* Config PHY interface */
+ portctrl = fsl_readl(&dr_regs->portsc1);
+ portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH);
+ switch (udc->phy_mode) {
+ case FSL_USB2_PHY_ULPI:
+ portctrl |= PORTSCX_PTS_ULPI;
+ break;
+ case FSL_USB2_PHY_UTMI_WIDE:
+ portctrl |= PORTSCX_PTW_16BIT;
+ /* fall through */
+ case FSL_USB2_PHY_UTMI:
+ portctrl |= PORTSCX_PTS_UTMI;
+ break;
+ case FSL_USB2_PHY_SERIAL:
+ portctrl |= PORTSCX_PTS_FSLS;
+ break;
+ default:
+ return -EINVAL;
+ }
+ fsl_writel(portctrl, &dr_regs->portsc1);
+
/* Stop and reset the usb controller */
tmp = fsl_readl(&dr_regs->usbcmd);
tmp &= ~USB_CMD_RUN_STOP;
@@ -215,31 +242,12 @@ static int dr_controller_setup(struct fsl_udc *udc)
udc->ep_qh, (int)tmp,
fsl_readl(&dr_regs->endpointlistaddr));
- /* Config PHY interface */
- portctrl = fsl_readl(&dr_regs->portsc1);
- portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH);
- switch (udc->phy_mode) {
- case FSL_USB2_PHY_ULPI:
- portctrl |= PORTSCX_PTS_ULPI;
- break;
- case FSL_USB2_PHY_UTMI_WIDE:
- portctrl |= PORTSCX_PTW_16BIT;
- /* fall through */
- case FSL_USB2_PHY_UTMI:
- portctrl |= PORTSCX_PTS_UTMI;
- break;
- case FSL_USB2_PHY_SERIAL:
- portctrl |= PORTSCX_PTS_FSLS;
- break;
- default:
- return -EINVAL;
- }
- fsl_writel(portctrl, &dr_regs->portsc1);
-
/* Config control enable i/o output, cpu endian register */
+#ifndef CONFIG_ARCH_MXC
ctrl = __raw_readl(&usb_sys_regs->control);
ctrl |= USB_CTRL_IOENB;
__raw_writel(ctrl, &usb_sys_regs->control);
+#endif
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
/* Turn on cache snooping hardware, since some PowerPC platforms
@@ -2043,6 +2051,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
size -= t;
next += t;
+#ifndef CONFIG_ARCH_MXC
tmp_reg = usb_sys_regs->snoop1;
t = scnprintf(next, size, "Snoop1 Reg : = [0x%x]\n\n", tmp_reg);
size -= t;
@@ -2053,6 +2062,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
tmp_reg);
size -= t;
next += t;
+#endif
/* ------fsl_udc, fsl_ep, fsl_request structure information ----- */
ep = &udc->eps[0];
@@ -2263,14 +2273,21 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
goto err_kfree;
}
- dr_regs = ioremap(res->start, res->end - res->start + 1);
+ dr_regs = ioremap(res->start, resource_size(res));
if (!dr_regs) {
ret = -ENOMEM;
goto err_release_mem_region;
}
+#ifndef CONFIG_ARCH_MXC
usb_sys_regs = (struct usb_sys_interface *)
((u32)dr_regs + USB_DR_SYS_OFFSET);
+#endif
+
+ /* Initialize USB clocks */
+ ret = fsl_udc_clk_init(pdev);
+ if (ret < 0)
+ goto err_iounmap_noclk;
/* Read Device Controller Capability Parameters register */
dccparams = fsl_readl(&dr_regs->dccparams);
@@ -2308,6 +2325,8 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
* leave usbintr reg untouched */
dr_controller_setup(udc_controller);
+ fsl_udc_clk_finalize(pdev);
+
/* Setup gadget structure */
udc_controller->gadget.ops = &fsl_gadget_ops;
udc_controller->gadget.is_dualspeed = 1;
@@ -2362,6 +2381,8 @@ err_unregister:
err_free_irq:
free_irq(udc_controller->irq, udc_controller);
err_iounmap:
+ fsl_udc_clk_release();
+err_iounmap_noclk:
iounmap(dr_regs);
err_release_mem_region:
release_mem_region(res->start, res->end - res->start + 1);
@@ -2384,6 +2405,8 @@ static int __exit fsl_udc_remove(struct platform_device *pdev)
return -ENODEV;
udc_controller->done = &done;
+ fsl_udc_clk_release();
+
/* DR has been stopped in usb_gadget_unregister_driver() */
remove_proc_file();
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index e63ef12645f..20aeceed48c 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -563,4 +563,22 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length)
* 2 + ((windex & USB_DIR_IN) ? 1 : 0))
#define get_pipe_by_ep(EP) (ep_index(EP) * 2 + ep_is_in(EP))
+struct platform_device;
+#ifdef CONFIG_ARCH_MXC
+int fsl_udc_clk_init(struct platform_device *pdev);
+void fsl_udc_clk_finalize(struct platform_device *pdev);
+void fsl_udc_clk_release(void);
+#else
+static inline int fsl_udc_clk_init(struct platform_device *pdev)
+{
+ return 0;
+}
+static inline void fsl_udc_clk_finalize(struct platform_device *pdev)
+{
+}
+static inline void fsl_udc_clk_release(void)
+{
+}
+#endif
+
#endif
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index ec6d439a2aa..8e0e9a0b736 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -137,6 +137,12 @@
#define gadget_is_musbhdrc(g) 0
#endif
+#ifdef CONFIG_USB_GADGET_LANGWELL
+#define gadget_is_langwell(g) (!strcmp("langwell_udc", (g)->name))
+#else
+#define gadget_is_langwell(g) 0
+#endif
+
/* from Montavista kernel (?) */
#ifdef CONFIG_USB_GADGET_MPC8272
#define gadget_is_mpc8272(g) !strcmp("mpc8272_udc", (g)->name)
@@ -231,6 +237,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
return 0x22;
else if (gadget_is_ci13xxx(gadget))
return 0x23;
+ else if (gadget_is_langwell(gadget))
+ return 0x24;
return -ENOENT;
}
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index de010c939db..112bb40a427 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -110,10 +110,10 @@ goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
return -EINVAL;
if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
return -ESHUTDOWN;
- if (ep->num != (desc->bEndpointAddress & 0x0f))
+ if (ep->num != usb_endpoint_num(desc))
return -EINVAL;
- switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ switch (usb_endpoint_type(desc)) {
case USB_ENDPOINT_XFER_BULK:
case USB_ENDPOINT_XFER_INT:
break;
@@ -142,7 +142,7 @@ goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
/* ep1/ep2 dma direction is chosen early; it works in the other
* direction, with pio. be cautious with out-dma.
*/
- ep->is_in = (USB_DIR_IN & desc->bEndpointAddress) != 0;
+ ep->is_in = usb_endpoint_dir_in(desc);
if (ep->is_in) {
mode |= 1;
ep->dma = (use_dma != 0) && (ep->num == UDC_MSTRD_ENDPOINT);
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 168658b4b4e..c52a681f376 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -415,6 +415,13 @@ static int write_packet(struct imx_ep_struct *imx_ep, struct imx_request *req)
u8 *buf;
int length, count, temp;
+ if (unlikely(__raw_readl(imx_ep->imx_usb->base +
+ USB_EP_STAT(EP_NO(imx_ep))) & EPSTAT_ZLPS)) {
+ D_TRX(imx_ep->imx_usb->dev, "<%s> zlp still queued in EP %s\n",
+ __func__, imx_ep->ep.name);
+ return -1;
+ }
+
buf = req->req.buf + req->req.actual;
prefetch(buf);
@@ -734,9 +741,12 @@ static struct usb_request *imx_ep_alloc_request
{
struct imx_request *req;
+ if (!usb_ep)
+ return NULL;
+
req = kzalloc(sizeof *req, gfp_flags);
- if (!req || !usb_ep)
- return 0;
+ if (!req)
+ return NULL;
INIT_LIST_HEAD(&req->queue);
req->in_use = 0;
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index d20937f28a1..7d33f50b587 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -384,9 +384,8 @@ ep_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
return value;
/* halt any endpoint by doing a "wrong direction" i/o call */
- if (data->desc.bEndpointAddress & USB_DIR_IN) {
- if ((data->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_ISOC)
+ if (usb_endpoint_dir_in(&data->desc)) {
+ if (usb_endpoint_xfer_isoc(&data->desc))
return -EINVAL;
DBG (data->dev, "%s halt\n", data->name);
spin_lock_irq (&data->dev->lock);
@@ -428,9 +427,8 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
return value;
/* halt any endpoint by doing a "wrong direction" i/o call */
- if (!(data->desc.bEndpointAddress & USB_DIR_IN)) {
- if ((data->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_ISOC)
+ if (!usb_endpoint_dir_in(&data->desc)) {
+ if (usb_endpoint_xfer_isoc(&data->desc))
return -EINVAL;
DBG (data->dev, "%s halt\n", data->name);
spin_lock_irq (&data->dev->lock);
@@ -691,7 +689,7 @@ ep_aio_read(struct kiocb *iocb, const struct iovec *iov,
struct ep_data *epdata = iocb->ki_filp->private_data;
char *buf;
- if (unlikely(epdata->desc.bEndpointAddress & USB_DIR_IN))
+ if (unlikely(usb_endpoint_dir_in(&epdata->desc)))
return -EINVAL;
buf = kmalloc(iocb->ki_left, GFP_KERNEL);
@@ -711,7 +709,7 @@ ep_aio_write(struct kiocb *iocb, const struct iovec *iov,
size_t len = 0;
int i = 0;
- if (unlikely(!(epdata->desc.bEndpointAddress & USB_DIR_IN)))
+ if (unlikely(!usb_endpoint_dir_in(&epdata->desc)))
return -EINVAL;
buf = kmalloc(iocb->ki_left, GFP_KERNEL);
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
new file mode 100644
index 00000000000..6829d596135
--- /dev/null
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -0,0 +1,3373 @@
+/*
+ * Intel Langwell USB Device Controller driver
+ * Copyright (C) 2008-2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+
+/* #undef DEBUG */
+/* #undef VERBOSE */
+
+#if defined(CONFIG_USB_LANGWELL_OTG)
+#define OTG_TRANSCEIVER
+#endif
+
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+
+#include "langwell_udc.h"
+
+
+#define DRIVER_DESC "Intel Langwell USB Device Controller driver"
+#define DRIVER_VERSION "16 May 2009"
+
+static const char driver_name[] = "langwell_udc";
+static const char driver_desc[] = DRIVER_DESC;
+
+
+/* controller device global variable */
+static struct langwell_udc *the_controller;
+
+/* for endpoint 0 operations */
+static const struct usb_endpoint_descriptor
+langwell_ep0_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0,
+ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+ .wMaxPacketSize = EP0_MAX_PKT_SIZE,
+};
+
+
+/*-------------------------------------------------------------------------*/
+/* debugging */
+
+#ifdef DEBUG
+#define DBG(dev, fmt, args...) \
+ pr_debug("%s %s: " fmt , driver_name, \
+ pci_name(dev->pdev), ## args)
+#else
+#define DBG(dev, fmt, args...) \
+ do { } while (0)
+#endif /* DEBUG */
+
+
+#ifdef VERBOSE
+#define VDBG DBG
+#else
+#define VDBG(dev, fmt, args...) \
+ do { } while (0)
+#endif /* VERBOSE */
+
+
+#define ERROR(dev, fmt, args...) \
+ pr_err("%s %s: " fmt , driver_name, \
+ pci_name(dev->pdev), ## args)
+
+#define WARNING(dev, fmt, args...) \
+ pr_warning("%s %s: " fmt , driver_name, \
+ pci_name(dev->pdev), ## args)
+
+#define INFO(dev, fmt, args...) \
+ pr_info("%s %s: " fmt , driver_name, \
+ pci_name(dev->pdev), ## args)
+
+
+#ifdef VERBOSE
+static inline void print_all_registers(struct langwell_udc *dev)
+{
+ int i;
+
+ /* Capability Registers */
+ printk(KERN_DEBUG "Capability Registers (offset: "
+ "0x%04x, length: 0x%08x)\n",
+ CAP_REG_OFFSET,
+ (u32)sizeof(struct langwell_cap_regs));
+ printk(KERN_DEBUG "caplength=0x%02x\n",
+ readb(&dev->cap_regs->caplength));
+ printk(KERN_DEBUG "hciversion=0x%04x\n",
+ readw(&dev->cap_regs->hciversion));
+ printk(KERN_DEBUG "hcsparams=0x%08x\n",
+ readl(&dev->cap_regs->hcsparams));
+ printk(KERN_DEBUG "hccparams=0x%08x\n",
+ readl(&dev->cap_regs->hccparams));
+ printk(KERN_DEBUG "dciversion=0x%04x\n",
+ readw(&dev->cap_regs->dciversion));
+ printk(KERN_DEBUG "dccparams=0x%08x\n",
+ readl(&dev->cap_regs->dccparams));
+
+ /* Operational Registers */
+ printk(KERN_DEBUG "Operational Registers (offset: "
+ "0x%04x, length: 0x%08x)\n",
+ OP_REG_OFFSET,
+ (u32)sizeof(struct langwell_op_regs));
+ printk(KERN_DEBUG "extsts=0x%08x\n",
+ readl(&dev->op_regs->extsts));
+ printk(KERN_DEBUG "extintr=0x%08x\n",
+ readl(&dev->op_regs->extintr));
+ printk(KERN_DEBUG "usbcmd=0x%08x\n",
+ readl(&dev->op_regs->usbcmd));
+ printk(KERN_DEBUG "usbsts=0x%08x\n",
+ readl(&dev->op_regs->usbsts));
+ printk(KERN_DEBUG "usbintr=0x%08x\n",
+ readl(&dev->op_regs->usbintr));
+ printk(KERN_DEBUG "frindex=0x%08x\n",
+ readl(&dev->op_regs->frindex));
+ printk(KERN_DEBUG "ctrldssegment=0x%08x\n",
+ readl(&dev->op_regs->ctrldssegment));
+ printk(KERN_DEBUG "deviceaddr=0x%08x\n",
+ readl(&dev->op_regs->deviceaddr));
+ printk(KERN_DEBUG "endpointlistaddr=0x%08x\n",
+ readl(&dev->op_regs->endpointlistaddr));
+ printk(KERN_DEBUG "ttctrl=0x%08x\n",
+ readl(&dev->op_regs->ttctrl));
+ printk(KERN_DEBUG "burstsize=0x%08x\n",
+ readl(&dev->op_regs->burstsize));
+ printk(KERN_DEBUG "txfilltuning=0x%08x\n",
+ readl(&dev->op_regs->txfilltuning));
+ printk(KERN_DEBUG "txttfilltuning=0x%08x\n",
+ readl(&dev->op_regs->txttfilltuning));
+ printk(KERN_DEBUG "ic_usb=0x%08x\n",
+ readl(&dev->op_regs->ic_usb));
+ printk(KERN_DEBUG "ulpi_viewport=0x%08x\n",
+ readl(&dev->op_regs->ulpi_viewport));
+ printk(KERN_DEBUG "configflag=0x%08x\n",
+ readl(&dev->op_regs->configflag));
+ printk(KERN_DEBUG "portsc1=0x%08x\n",
+ readl(&dev->op_regs->portsc1));
+ printk(KERN_DEBUG "devlc=0x%08x\n",
+ readl(&dev->op_regs->devlc));
+ printk(KERN_DEBUG "otgsc=0x%08x\n",
+ readl(&dev->op_regs->otgsc));
+ printk(KERN_DEBUG "usbmode=0x%08x\n",
+ readl(&dev->op_regs->usbmode));
+ printk(KERN_DEBUG "endptnak=0x%08x\n",
+ readl(&dev->op_regs->endptnak));
+ printk(KERN_DEBUG "endptnaken=0x%08x\n",
+ readl(&dev->op_regs->endptnaken));
+ printk(KERN_DEBUG "endptsetupstat=0x%08x\n",
+ readl(&dev->op_regs->endptsetupstat));
+ printk(KERN_DEBUG "endptprime=0x%08x\n",
+ readl(&dev->op_regs->endptprime));
+ printk(KERN_DEBUG "endptflush=0x%08x\n",
+ readl(&dev->op_regs->endptflush));
+ printk(KERN_DEBUG "endptstat=0x%08x\n",
+ readl(&dev->op_regs->endptstat));
+ printk(KERN_DEBUG "endptcomplete=0x%08x\n",
+ readl(&dev->op_regs->endptcomplete));
+
+ for (i = 0; i < dev->ep_max / 2; i++) {
+ printk(KERN_DEBUG "endptctrl[%d]=0x%08x\n",
+ i, readl(&dev->op_regs->endptctrl[i]));
+ }
+}
+#endif /* VERBOSE */
+
+
+/*-------------------------------------------------------------------------*/
+
+#define DIR_STRING(bAddress) (((bAddress) & USB_DIR_IN) ? "in" : "out")
+
+#define is_in(ep) (((ep)->ep_num == 0) ? ((ep)->dev->ep0_dir == \
+ USB_DIR_IN) : ((ep)->desc->bEndpointAddress \
+ & USB_DIR_IN) == USB_DIR_IN)
+
+
+#ifdef DEBUG
+static char *type_string(u8 bmAttributes)
+{
+ switch ((bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_BULK:
+ return "bulk";
+ case USB_ENDPOINT_XFER_ISOC:
+ return "iso";
+ case USB_ENDPOINT_XFER_INT:
+ return "int";
+ };
+
+ return "control";
+}
+#endif
+
+
+/* configure endpoint control registers */
+static void ep_reset(struct langwell_ep *ep, unsigned char ep_num,
+ unsigned char is_in, unsigned char ep_type)
+{
+ struct langwell_udc *dev;
+ u32 endptctrl;
+
+ dev = ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
+ if (is_in) { /* TX */
+ if (ep_num)
+ endptctrl |= EPCTRL_TXR;
+ endptctrl |= EPCTRL_TXE;
+ endptctrl |= ep_type << EPCTRL_TXT_SHIFT;
+ } else { /* RX */
+ if (ep_num)
+ endptctrl |= EPCTRL_RXR;
+ endptctrl |= EPCTRL_RXE;
+ endptctrl |= ep_type << EPCTRL_RXT_SHIFT;
+ }
+
+ writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* reset ep0 dQH and endptctrl */
+static void ep0_reset(struct langwell_udc *dev)
+{
+ struct langwell_ep *ep;
+ int i;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* ep0 in and out */
+ for (i = 0; i < 2; i++) {
+ ep = &dev->ep[i];
+ ep->dev = dev;
+
+ /* ep0 dQH */
+ ep->dqh = &dev->ep_dqh[i];
+
+ /* configure ep0 endpoint capabilities in dQH */
+ ep->dqh->dqh_ios = 1;
+ ep->dqh->dqh_mpl = EP0_MAX_PKT_SIZE;
+
+ /* FIXME: enable ep0-in HW zero length termination select */
+ if (is_in(ep))
+ ep->dqh->dqh_zlt = 0;
+ ep->dqh->dqh_mult = 0;
+
+ /* configure ep0 control registers */
+ ep_reset(&dev->ep[0], 0, i, USB_ENDPOINT_XFER_CONTROL);
+ }
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* endpoints operations */
+
+/* configure endpoint, making it usable */
+static int langwell_ep_enable(struct usb_ep *_ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct langwell_udc *dev;
+ struct langwell_ep *ep;
+ u16 max = 0;
+ unsigned long flags;
+ int retval = 0;
+ unsigned char zlt, ios = 0, mult = 0;
+
+ ep = container_of(_ep, struct langwell_ep, ep);
+ dev = ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (!_ep || !desc || ep->desc
+ || desc->bDescriptorType != USB_DT_ENDPOINT)
+ return -EINVAL;
+
+ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+ return -ESHUTDOWN;
+
+ max = le16_to_cpu(desc->wMaxPacketSize);
+
+ /*
+ * disable HW zero length termination select
+ * driver handles zero length packet through req->req.zero
+ */
+ zlt = 1;
+
+ /*
+ * sanity check type, direction, address, and then
+ * initialize the endpoint capabilities fields in dQH
+ */
+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ ios = 1;
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ if ((dev->gadget.speed == USB_SPEED_HIGH
+ && max != 512)
+ || (dev->gadget.speed == USB_SPEED_FULL
+ && max > 64)) {
+ goto done;
+ }
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
+ goto done;
+
+ switch (dev->gadget.speed) {
+ case USB_SPEED_HIGH:
+ if (max <= 1024)
+ break;
+ case USB_SPEED_FULL:
+ if (max <= 64)
+ break;
+ default:
+ if (max <= 8)
+ break;
+ goto done;
+ }
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ if (strstr(ep->ep.name, "-bulk")
+ || strstr(ep->ep.name, "-int"))
+ goto done;
+
+ switch (dev->gadget.speed) {
+ case USB_SPEED_HIGH:
+ if (max <= 1024)
+ break;
+ case USB_SPEED_FULL:
+ if (max <= 1023)
+ break;
+ default:
+ goto done;
+ }
+ /*
+ * FIXME:
+ * calculate transactions needed for high bandwidth iso
+ */
+ mult = (unsigned char)(1 + ((max >> 11) & 0x03));
+ max = max & 0x8ff; /* bit 0~10 */
+ /* 3 transactions at most */
+ if (mult > 3)
+ goto done;
+ break;
+ default:
+ goto done;
+ }
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* configure endpoint capabilities in dQH */
+ ep->dqh->dqh_ios = ios;
+ ep->dqh->dqh_mpl = cpu_to_le16(max);
+ ep->dqh->dqh_zlt = zlt;
+ ep->dqh->dqh_mult = mult;
+
+ ep->ep.maxpacket = max;
+ ep->desc = desc;
+ ep->stopped = 0;
+ ep->ep_num = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+
+ /* ep_type */
+ ep->ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+ /* configure endpoint control registers */
+ ep_reset(ep, ep->ep_num, is_in(ep), ep->ep_type);
+
+ DBG(dev, "enabled %s (ep%d%s-%s), max %04x\n",
+ _ep->name,
+ ep->ep_num,
+ DIR_STRING(desc->bEndpointAddress),
+ type_string(desc->bmAttributes),
+ max);
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+done:
+ VDBG(dev, "<--- %s()\n", __func__);
+ return retval;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* retire a request */
+static void done(struct langwell_ep *ep, struct langwell_request *req,
+ int status)
+{
+ struct langwell_udc *dev = ep->dev;
+ unsigned stopped = ep->stopped;
+ struct langwell_dtd *curr_dtd, *next_dtd;
+ int i;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* remove the req from ep->queue */
+ list_del_init(&req->queue);
+
+ if (req->req.status == -EINPROGRESS)
+ req->req.status = status;
+ else
+ status = req->req.status;
+
+ /* free dTD for the request */
+ next_dtd = req->head;
+ for (i = 0; i < req->dtd_count; i++) {
+ curr_dtd = next_dtd;
+ if (i != req->dtd_count - 1)
+ next_dtd = curr_dtd->next_dtd_virt;
+ dma_pool_free(dev->dtd_pool, curr_dtd, curr_dtd->dtd_dma);
+ }
+
+ if (req->mapped) {
+ dma_unmap_single(&dev->pdev->dev, req->req.dma, req->req.length,
+ is_in(ep) ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
+ req->req.dma = DMA_ADDR_INVALID;
+ req->mapped = 0;
+ } else
+ dma_sync_single_for_cpu(&dev->pdev->dev, req->req.dma,
+ req->req.length,
+ is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+ if (status != -ESHUTDOWN)
+ DBG(dev, "complete %s, req %p, stat %d, len %u/%u\n",
+ ep->ep.name, &req->req, status,
+ req->req.actual, req->req.length);
+
+ /* don't modify queue heads during completion callback */
+ ep->stopped = 1;
+
+ spin_unlock(&dev->lock);
+ /* complete routine from gadget driver */
+ if (req->req.complete)
+ req->req.complete(&ep->ep, &req->req);
+
+ spin_lock(&dev->lock);
+ ep->stopped = stopped;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+static void langwell_ep_fifo_flush(struct usb_ep *_ep);
+
+/* delete all endpoint requests, called with spinlock held */
+static void nuke(struct langwell_ep *ep, int status)
+{
+ /* called with spinlock held */
+ ep->stopped = 1;
+
+ /* endpoint fifo flush */
+ if (&ep->ep && ep->desc)
+ langwell_ep_fifo_flush(&ep->ep);
+
+ while (!list_empty(&ep->queue)) {
+ struct langwell_request *req = NULL;
+ req = list_entry(ep->queue.next, struct langwell_request,
+ queue);
+ done(ep, req, status);
+ }
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* endpoint is no longer usable */
+static int langwell_ep_disable(struct usb_ep *_ep)
+{
+ struct langwell_ep *ep;
+ unsigned long flags;
+ struct langwell_udc *dev;
+ int ep_num;
+ u32 endptctrl;
+
+ ep = container_of(_ep, struct langwell_ep, ep);
+ dev = ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (!_ep || !ep->desc)
+ return -EINVAL;
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* disable endpoint control register */
+ ep_num = ep->ep_num;
+ endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
+ if (is_in(ep))
+ endptctrl &= ~EPCTRL_TXE;
+ else
+ endptctrl &= ~EPCTRL_RXE;
+ writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
+
+ /* nuke all pending requests (does flush) */
+ nuke(ep, -ESHUTDOWN);
+
+ ep->desc = NULL;
+ ep->stopped = 1;
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ DBG(dev, "disabled %s\n", _ep->name);
+ VDBG(dev, "<--- %s()\n", __func__);
+
+ return 0;
+}
+
+
+/* allocate a request object to use with this endpoint */
+static struct usb_request *langwell_alloc_request(struct usb_ep *_ep,
+ gfp_t gfp_flags)
+{
+ struct langwell_ep *ep;
+ struct langwell_udc *dev;
+ struct langwell_request *req = NULL;
+
+ if (!_ep)
+ return NULL;
+
+ ep = container_of(_ep, struct langwell_ep, ep);
+ dev = ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ req = kzalloc(sizeof(*req), gfp_flags);
+ if (!req)
+ return NULL;
+
+ req->req.dma = DMA_ADDR_INVALID;
+ INIT_LIST_HEAD(&req->queue);
+
+ VDBG(dev, "alloc request for %s\n", _ep->name);
+ VDBG(dev, "<--- %s()\n", __func__);
+ return &req->req;
+}
+
+
+/* free a request object */
+static void langwell_free_request(struct usb_ep *_ep,
+ struct usb_request *_req)
+{
+ struct langwell_ep *ep;
+ struct langwell_udc *dev;
+ struct langwell_request *req = NULL;
+
+ ep = container_of(_ep, struct langwell_ep, ep);
+ dev = ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (!_ep || !_req)
+ return;
+
+ req = container_of(_req, struct langwell_request, req);
+ WARN_ON(!list_empty(&req->queue));
+
+ if (_req)
+ kfree(req);
+
+ VDBG(dev, "free request for %s\n", _ep->name);
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* queue dTD and PRIME endpoint */
+static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
+{
+ u32 bit_mask, usbcmd, endptstat, dtd_dma;
+ u8 dtd_status;
+ int i;
+ struct langwell_dqh *dqh;
+ struct langwell_udc *dev;
+
+ dev = ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ i = ep->ep_num * 2 + is_in(ep);
+ dqh = &dev->ep_dqh[i];
+
+ if (ep->ep_num)
+ VDBG(dev, "%s\n", ep->name);
+ else
+ /* ep0 */
+ VDBG(dev, "%s-%s\n", ep->name, is_in(ep) ? "in" : "out");
+
+ VDBG(dev, "ep_dqh[%d] addr: 0x%08x\n", i, (u32)&(dev->ep_dqh[i]));
+
+ bit_mask = is_in(ep) ?
+ (1 << (ep->ep_num + 16)) : (1 << (ep->ep_num));
+
+ VDBG(dev, "bit_mask = 0x%08x\n", bit_mask);
+
+ /* check if the pipe is empty */
+ if (!(list_empty(&ep->queue))) {
+ /* add dTD to the end of linked list */
+ struct langwell_request *lastreq;
+ lastreq = list_entry(ep->queue.prev,
+ struct langwell_request, queue);
+
+ lastreq->tail->dtd_next =
+ cpu_to_le32(req->head->dtd_dma & DTD_NEXT_MASK);
+
+ /* read prime bit, if 1 goto out */
+ if (readl(&dev->op_regs->endptprime) & bit_mask)
+ goto out;
+
+ do {
+ /* set ATDTW bit in USBCMD */
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ writel(usbcmd | CMD_ATDTW, &dev->op_regs->usbcmd);
+
+ /* read correct status bit */
+ endptstat = readl(&dev->op_regs->endptstat) & bit_mask;
+
+ } while (!(readl(&dev->op_regs->usbcmd) & CMD_ATDTW));
+
+ /* write ATDTW bit to 0 */
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ writel(usbcmd & ~CMD_ATDTW, &dev->op_regs->usbcmd);
+
+ if (endptstat)
+ goto out;
+ }
+
+ /* write dQH next pointer and terminate bit to 0 */
+ dtd_dma = req->head->dtd_dma & DTD_NEXT_MASK;
+ dqh->dtd_next = cpu_to_le32(dtd_dma);
+
+ /* clear active and halt bit */
+ dtd_status = (u8) ~(DTD_STS_ACTIVE | DTD_STS_HALTED);
+ dqh->dtd_status &= dtd_status;
+ VDBG(dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
+
+ /* write 1 to endptprime register to PRIME endpoint */
+ bit_mask = is_in(ep) ? (1 << (ep->ep_num + 16)) : (1 << ep->ep_num);
+ VDBG(dev, "endprime bit_mask = 0x%08x\n", bit_mask);
+ writel(bit_mask, &dev->op_regs->endptprime);
+out:
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* fill in the dTD structure to build a transfer descriptor */
+static struct langwell_dtd *build_dtd(struct langwell_request *req,
+ unsigned *length, dma_addr_t *dma, int *is_last)
+{
+ u32 buf_ptr;
+ struct langwell_dtd *dtd;
+ struct langwell_udc *dev;
+ int i;
+
+ dev = req->ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* the maximum transfer length, up to 16k bytes */
+ *length = min(req->req.length - req->req.actual,
+ (unsigned)DTD_MAX_TRANSFER_LENGTH);
+
+ /* create dTD dma_pool resource */
+ dtd = dma_pool_alloc(dev->dtd_pool, GFP_KERNEL, dma);
+ if (dtd == NULL)
+ return dtd;
+ dtd->dtd_dma = *dma;
+
+ /* initialize buffer page pointers */
+ buf_ptr = (u32)(req->req.dma + req->req.actual);
+ for (i = 0; i < 5; i++)
+ dtd->dtd_buf[i] = cpu_to_le32(buf_ptr + i * PAGE_SIZE);
+
+ req->req.actual += *length;
+
+ /* fill in total bytes with transfer size */
+ dtd->dtd_total = cpu_to_le16(*length);
+ VDBG(dev, "dtd->dtd_total = %d\n", dtd->dtd_total);
+
+ /* set is_last flag if req->req.zero is set or not */
+ if (req->req.zero) {
+ if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
+ *is_last = 1;
+ else
+ *is_last = 0;
+ } else if (req->req.length == req->req.actual) {
+ *is_last = 1;
+ } else
+ *is_last = 0;
+
+ if (*is_last == 0)
+ VDBG(dev, "multi-dtd request!\n");
+
+ /* set interrupt on complete bit for the last dTD */
+ if (*is_last && !req->req.no_interrupt)
+ dtd->dtd_ioc = 1;
+
+ /* set multiplier override 0 for non-ISO and non-TX endpoint */
+ dtd->dtd_multo = 0;
+
+ /* set the active bit of status field to 1 */
+ dtd->dtd_status = DTD_STS_ACTIVE;
+ VDBG(dev, "dtd->dtd_status = 0x%02x\n", dtd->dtd_status);
+
+ VDBG(dev, "length = %d, dma addr= 0x%08x\n", *length, (int)*dma);
+ VDBG(dev, "<--- %s()\n", __func__);
+ return dtd;
+}
+
+
+/* generate dTD linked list for a request */
+static int req_to_dtd(struct langwell_request *req)
+{
+ unsigned count;
+ int is_last, is_first = 1;
+ struct langwell_dtd *dtd, *last_dtd = NULL;
+ struct langwell_udc *dev;
+ dma_addr_t dma;
+
+ dev = req->ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+ do {
+ dtd = build_dtd(req, &count, &dma, &is_last);
+ if (dtd == NULL)
+ return -ENOMEM;
+
+ if (is_first) {
+ is_first = 0;
+ req->head = dtd;
+ } else {
+ last_dtd->dtd_next = cpu_to_le32(dma);
+ last_dtd->next_dtd_virt = dtd;
+ }
+ last_dtd = dtd;
+ req->dtd_count++;
+ } while (!is_last);
+
+ /* set terminate bit to 1 for the last dTD */
+ dtd->dtd_next = DTD_TERM;
+
+ req->tail = dtd;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* queue (submits) an I/O requests to an endpoint */
+static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+ gfp_t gfp_flags)
+{
+ struct langwell_request *req;
+ struct langwell_ep *ep;
+ struct langwell_udc *dev;
+ unsigned long flags;
+ int is_iso = 0, zlflag = 0;
+
+ /* always require a cpu-view buffer */
+ req = container_of(_req, struct langwell_request, req);
+ ep = container_of(_ep, struct langwell_ep, ep);
+
+ if (!_req || !_req->complete || !_req->buf
+ || !list_empty(&req->queue)) {
+ return -EINVAL;
+ }
+
+ if (unlikely(!_ep || !ep->desc))
+ return -EINVAL;
+
+ dev = ep->dev;
+ req->ep = ep;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+ if (req->req.length > ep->ep.maxpacket)
+ return -EMSGSIZE;
+ is_iso = 1;
+ }
+
+ if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
+ return -ESHUTDOWN;
+
+ /* set up dma mapping in case the caller didn't */
+ if (_req->dma == DMA_ADDR_INVALID) {
+ /* WORKAROUND: WARN_ON(size == 0) */
+ if (_req->length == 0) {
+ VDBG(dev, "req->length: 0->1\n");
+ zlflag = 1;
+ _req->length++;
+ }
+
+ _req->dma = dma_map_single(&dev->pdev->dev,
+ _req->buf, _req->length,
+ is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ if (zlflag && (_req->length == 1)) {
+ VDBG(dev, "req->length: 1->0\n");
+ zlflag = 0;
+ _req->length = 0;
+ }
+
+ req->mapped = 1;
+ VDBG(dev, "req->mapped = 1\n");
+ } else {
+ dma_sync_single_for_device(&dev->pdev->dev,
+ _req->dma, _req->length,
+ is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ req->mapped = 0;
+ VDBG(dev, "req->mapped = 0\n");
+ }
+
+ DBG(dev, "%s queue req %p, len %u, buf %p, dma 0x%08x\n",
+ _ep->name,
+ _req, _req->length, _req->buf, _req->dma);
+
+ _req->status = -EINPROGRESS;
+ _req->actual = 0;
+ req->dtd_count = 0;
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* build and put dTDs to endpoint queue */
+ if (!req_to_dtd(req)) {
+ queue_dtd(ep, req);
+ } else {
+ spin_unlock_irqrestore(&dev->lock, flags);
+ return -ENOMEM;
+ }
+
+ /* update ep0 state */
+ if (ep->ep_num == 0)
+ dev->ep0_state = DATA_STATE_XMIT;
+
+ if (likely(req != NULL)) {
+ list_add_tail(&req->queue, &ep->queue);
+ VDBG(dev, "list_add_tail() \n");
+ }
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* dequeue (cancels, unlinks) an I/O request from an endpoint */
+static int langwell_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct langwell_ep *ep;
+ struct langwell_udc *dev;
+ struct langwell_request *req;
+ unsigned long flags;
+ int stopped, ep_num, retval = 0;
+ u32 endptctrl;
+
+ ep = container_of(_ep, struct langwell_ep, ep);
+ dev = ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (!_ep || !ep->desc || !_req)
+ return -EINVAL;
+
+ if (!dev->driver)
+ return -ESHUTDOWN;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ stopped = ep->stopped;
+
+ /* quiesce dma while we patch the queue */
+ ep->stopped = 1;
+ ep_num = ep->ep_num;
+
+ /* disable endpoint control register */
+ endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
+ if (is_in(ep))
+ endptctrl &= ~EPCTRL_TXE;
+ else
+ endptctrl &= ~EPCTRL_RXE;
+ writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
+
+ /* make sure it's still queued on this endpoint */
+ list_for_each_entry(req, &ep->queue, queue) {
+ if (&req->req == _req)
+ break;
+ }
+
+ if (&req->req != _req) {
+ retval = -EINVAL;
+ goto done;
+ }
+
+ /* queue head may be partially complete. */
+ if (ep->queue.next == &req->queue) {
+ DBG(dev, "unlink (%s) dma\n", _ep->name);
+ _req->status = -ECONNRESET;
+ langwell_ep_fifo_flush(&ep->ep);
+
+ /* not the last request in endpoint queue */
+ if (likely(ep->queue.next == &req->queue)) {
+ struct langwell_dqh *dqh;
+ struct langwell_request *next_req;
+
+ dqh = ep->dqh;
+ next_req = list_entry(req->queue.next,
+ struct langwell_request, queue);
+
+ /* point the dQH to the first dTD of next request */
+ writel((u32) next_req->head, &dqh->dqh_current);
+ }
+ } else {
+ struct langwell_request *prev_req;
+
+ prev_req = list_entry(req->queue.prev,
+ struct langwell_request, queue);
+ writel(readl(&req->tail->dtd_next),
+ &prev_req->tail->dtd_next);
+ }
+
+ done(ep, req, -ECONNRESET);
+
+done:
+ /* enable endpoint again */
+ endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
+ if (is_in(ep))
+ endptctrl |= EPCTRL_TXE;
+ else
+ endptctrl |= EPCTRL_RXE;
+ writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
+
+ ep->stopped = stopped;
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return retval;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* endpoint set/clear halt */
+static void ep_set_halt(struct langwell_ep *ep, int value)
+{
+ u32 endptctrl = 0;
+ int ep_num;
+ struct langwell_udc *dev = ep->dev;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ ep_num = ep->ep_num;
+ endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
+
+ /* value: 1 - set halt, 0 - clear halt */
+ if (value) {
+ /* set the stall bit */
+ if (is_in(ep))
+ endptctrl |= EPCTRL_TXS;
+ else
+ endptctrl |= EPCTRL_RXS;
+ } else {
+ /* clear the stall bit and reset data toggle */
+ if (is_in(ep)) {
+ endptctrl &= ~EPCTRL_TXS;
+ endptctrl |= EPCTRL_TXR;
+ } else {
+ endptctrl &= ~EPCTRL_RXS;
+ endptctrl |= EPCTRL_RXR;
+ }
+ }
+
+ writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* set the endpoint halt feature */
+static int langwell_ep_set_halt(struct usb_ep *_ep, int value)
+{
+ struct langwell_ep *ep;
+ struct langwell_udc *dev;
+ unsigned long flags;
+ int retval = 0;
+
+ ep = container_of(_ep, struct langwell_ep, ep);
+ dev = ep->dev;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (!_ep || !ep->desc)
+ return -EINVAL;
+
+ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+ return -ESHUTDOWN;
+
+ if (ep->desc && (ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_ISOC)
+ return -EOPNOTSUPP;
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /*
+ * attempt to halt IN ep will fail if any transfer requests
+ * are still queue
+ */
+ if (!list_empty(&ep->queue) && is_in(ep) && value) {
+ /* IN endpoint FIFO holds bytes */
+ DBG(dev, "%s FIFO holds bytes\n", _ep->name);
+ retval = -EAGAIN;
+ goto done;
+ }
+
+ /* endpoint set/clear halt */
+ if (ep->ep_num) {
+ ep_set_halt(ep, value);
+ } else { /* endpoint 0 */
+ dev->ep0_state = WAIT_FOR_SETUP;
+ dev->ep0_dir = USB_DIR_OUT;
+ }
+done:
+ spin_unlock_irqrestore(&dev->lock, flags);
+ DBG(dev, "%s %s halt\n", _ep->name, value ? "set" : "clear");
+ VDBG(dev, "<--- %s()\n", __func__);
+ return retval;
+}
+
+
+/* set the halt feature and ignores clear requests */
+static int langwell_ep_set_wedge(struct usb_ep *_ep)
+{
+ struct langwell_ep *ep;
+ struct langwell_udc *dev;
+
+ ep = container_of(_ep, struct langwell_ep, ep);
+ dev = ep->dev;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (!_ep || !ep->desc)
+ return -EINVAL;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return usb_ep_set_halt(_ep);
+}
+
+
+/* flush contents of a fifo */
+static void langwell_ep_fifo_flush(struct usb_ep *_ep)
+{
+ struct langwell_ep *ep;
+ struct langwell_udc *dev;
+ u32 flush_bit;
+ unsigned long timeout;
+
+ ep = container_of(_ep, struct langwell_ep, ep);
+ dev = ep->dev;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (!_ep || !ep->desc) {
+ VDBG(dev, "ep or ep->desc is NULL\n");
+ VDBG(dev, "<--- %s()\n", __func__);
+ return;
+ }
+
+ VDBG(dev, "%s-%s fifo flush\n", _ep->name, is_in(ep) ? "in" : "out");
+
+ /* flush endpoint buffer */
+ if (ep->ep_num == 0)
+ flush_bit = (1 << 16) | 1;
+ else if (is_in(ep))
+ flush_bit = 1 << (ep->ep_num + 16); /* TX */
+ else
+ flush_bit = 1 << ep->ep_num; /* RX */
+
+ /* wait until flush complete */
+ timeout = jiffies + FLUSH_TIMEOUT;
+ do {
+ writel(flush_bit, &dev->op_regs->endptflush);
+ while (readl(&dev->op_regs->endptflush)) {
+ if (time_after(jiffies, timeout)) {
+ ERROR(dev, "ep flush timeout\n");
+ goto done;
+ }
+ cpu_relax();
+ }
+ } while (readl(&dev->op_regs->endptstat) & flush_bit);
+done:
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* endpoints operations structure */
+static const struct usb_ep_ops langwell_ep_ops = {
+
+ /* configure endpoint, making it usable */
+ .enable = langwell_ep_enable,
+
+ /* endpoint is no longer usable */
+ .disable = langwell_ep_disable,
+
+ /* allocate a request object to use with this endpoint */
+ .alloc_request = langwell_alloc_request,
+
+ /* free a request object */
+ .free_request = langwell_free_request,
+
+ /* queue (submits) an I/O requests to an endpoint */
+ .queue = langwell_ep_queue,
+
+ /* dequeue (cancels, unlinks) an I/O request from an endpoint */
+ .dequeue = langwell_ep_dequeue,
+
+ /* set the endpoint halt feature */
+ .set_halt = langwell_ep_set_halt,
+
+ /* set the halt feature and ignores clear requests */
+ .set_wedge = langwell_ep_set_wedge,
+
+ /* flush contents of a fifo */
+ .fifo_flush = langwell_ep_fifo_flush,
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/* device controller usb_gadget_ops structure */
+
+/* returns the current frame number */
+static int langwell_get_frame(struct usb_gadget *_gadget)
+{
+ struct langwell_udc *dev;
+ u16 retval;
+
+ if (!_gadget)
+ return -ENODEV;
+
+ dev = container_of(_gadget, struct langwell_udc, gadget);
+ VDBG(dev, "---> %s()\n", __func__);
+
+ retval = readl(&dev->op_regs->frindex) & FRINDEX_MASK;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return retval;
+}
+
+
+/* tries to wake up the host connected to this gadget */
+static int langwell_wakeup(struct usb_gadget *_gadget)
+{
+ struct langwell_udc *dev;
+ u32 portsc1, devlc;
+ unsigned long flags;
+
+ if (!_gadget)
+ return 0;
+
+ dev = container_of(_gadget, struct langwell_udc, gadget);
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* Remote Wakeup feature not enabled by host */
+ if (!dev->remote_wakeup)
+ return -ENOTSUPP;
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ portsc1 = readl(&dev->op_regs->portsc1);
+ if (!(portsc1 & PORTS_SUSP)) {
+ spin_unlock_irqrestore(&dev->lock, flags);
+ return 0;
+ }
+
+ /* LPM L1 to L0, remote wakeup */
+ if (dev->lpm && dev->lpm_state == LPM_L1) {
+ portsc1 |= PORTS_SLP;
+ writel(portsc1, &dev->op_regs->portsc1);
+ }
+
+ /* force port resume */
+ if (dev->usb_state == USB_STATE_SUSPENDED) {
+ portsc1 |= PORTS_FPR;
+ writel(portsc1, &dev->op_regs->portsc1);
+ }
+
+ /* exit PHY low power suspend */
+ devlc = readl(&dev->op_regs->devlc);
+ VDBG(dev, "devlc = 0x%08x\n", devlc);
+ devlc &= ~LPM_PHCD;
+ writel(devlc, &dev->op_regs->devlc);
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* notify controller that VBUS is powered or not */
+static int langwell_vbus_session(struct usb_gadget *_gadget, int is_active)
+{
+ struct langwell_udc *dev;
+ unsigned long flags;
+ u32 usbcmd;
+
+ if (!_gadget)
+ return -ENODEV;
+
+ dev = container_of(_gadget, struct langwell_udc, gadget);
+ VDBG(dev, "---> %s()\n", __func__);
+
+ spin_lock_irqsave(&dev->lock, flags);
+ VDBG(dev, "VBUS status: %s\n", is_active ? "on" : "off");
+
+ dev->vbus_active = (is_active != 0);
+ if (dev->driver && dev->softconnected && dev->vbus_active) {
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ usbcmd |= CMD_RUNSTOP;
+ writel(usbcmd, &dev->op_regs->usbcmd);
+ } else {
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ usbcmd &= ~CMD_RUNSTOP;
+ writel(usbcmd, &dev->op_regs->usbcmd);
+ }
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* constrain controller's VBUS power usage */
+static int langwell_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
+{
+ struct langwell_udc *dev;
+
+ if (!_gadget)
+ return -ENODEV;
+
+ dev = container_of(_gadget, struct langwell_udc, gadget);
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (dev->transceiver) {
+ VDBG(dev, "otg_set_power\n");
+ VDBG(dev, "<--- %s()\n", __func__);
+ return otg_set_power(dev->transceiver, mA);
+ }
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return -ENOTSUPP;
+}
+
+
+/* D+ pullup, software-controlled connect/disconnect to USB host */
+static int langwell_pullup(struct usb_gadget *_gadget, int is_on)
+{
+ struct langwell_udc *dev;
+ u32 usbcmd;
+ unsigned long flags;
+
+ if (!_gadget)
+ return -ENODEV;
+
+ dev = container_of(_gadget, struct langwell_udc, gadget);
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ spin_lock_irqsave(&dev->lock, flags);
+ dev->softconnected = (is_on != 0);
+
+ if (dev->driver && dev->softconnected && dev->vbus_active) {
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ usbcmd |= CMD_RUNSTOP;
+ writel(usbcmd, &dev->op_regs->usbcmd);
+ } else {
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ usbcmd &= ~CMD_RUNSTOP;
+ writel(usbcmd, &dev->op_regs->usbcmd);
+ }
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* device controller usb_gadget_ops structure */
+static const struct usb_gadget_ops langwell_ops = {
+
+ /* returns the current frame number */
+ .get_frame = langwell_get_frame,
+
+ /* tries to wake up the host connected to this gadget */
+ .wakeup = langwell_wakeup,
+
+ /* set the device selfpowered feature, always selfpowered */
+ /* .set_selfpowered = langwell_set_selfpowered, */
+
+ /* notify controller that VBUS is powered or not */
+ .vbus_session = langwell_vbus_session,
+
+ /* constrain controller's VBUS power usage */
+ .vbus_draw = langwell_vbus_draw,
+
+ /* D+ pullup, software-controlled connect/disconnect to USB host */
+ .pullup = langwell_pullup,
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/* device controller operations */
+
+/* reset device controller */
+static int langwell_udc_reset(struct langwell_udc *dev)
+{
+ u32 usbcmd, usbmode, devlc, endpointlistaddr;
+ unsigned long timeout;
+
+ if (!dev)
+ return -EINVAL;
+
+ DBG(dev, "---> %s()\n", __func__);
+
+ /* set controller to stop state */
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ usbcmd &= ~CMD_RUNSTOP;
+ writel(usbcmd, &dev->op_regs->usbcmd);
+
+ /* reset device controller */
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ usbcmd |= CMD_RST;
+ writel(usbcmd, &dev->op_regs->usbcmd);
+
+ /* wait for reset to complete */
+ timeout = jiffies + RESET_TIMEOUT;
+ while (readl(&dev->op_regs->usbcmd) & CMD_RST) {
+ if (time_after(jiffies, timeout)) {
+ ERROR(dev, "device reset timeout\n");
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ }
+
+ /* set controller to device mode */
+ usbmode = readl(&dev->op_regs->usbmode);
+ usbmode |= MODE_DEVICE;
+
+ /* turn setup lockout off, require setup tripwire in usbcmd */
+ usbmode |= MODE_SLOM;
+
+ writel(usbmode, &dev->op_regs->usbmode);
+ usbmode = readl(&dev->op_regs->usbmode);
+ VDBG(dev, "usbmode=0x%08x\n", usbmode);
+
+ /* Write-Clear setup status */
+ writel(0, &dev->op_regs->usbsts);
+
+ /* if support USB LPM, ACK all LPM token */
+ if (dev->lpm) {
+ devlc = readl(&dev->op_regs->devlc);
+ devlc &= ~LPM_STL; /* don't STALL LPM token */
+ devlc &= ~LPM_NYT_ACK; /* ACK LPM token */
+ writel(devlc, &dev->op_regs->devlc);
+ }
+
+ /* fill endpointlistaddr register */
+ endpointlistaddr = dev->ep_dqh_dma;
+ endpointlistaddr &= ENDPOINTLISTADDR_MASK;
+ writel(endpointlistaddr, &dev->op_regs->endpointlistaddr);
+
+ VDBG(dev, "dQH base (vir: %p, phy: 0x%08x), endpointlistaddr=0x%08x\n",
+ dev->ep_dqh, endpointlistaddr,
+ readl(&dev->op_regs->endpointlistaddr));
+ DBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* reinitialize device controller endpoints */
+static int eps_reinit(struct langwell_udc *dev)
+{
+ struct langwell_ep *ep;
+ char name[14];
+ int i;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* initialize ep0 */
+ ep = &dev->ep[0];
+ ep->dev = dev;
+ strncpy(ep->name, "ep0", sizeof(ep->name));
+ ep->ep.name = ep->name;
+ ep->ep.ops = &langwell_ep_ops;
+ ep->stopped = 0;
+ ep->ep.maxpacket = EP0_MAX_PKT_SIZE;
+ ep->ep_num = 0;
+ ep->desc = &langwell_ep0_desc;
+ INIT_LIST_HEAD(&ep->queue);
+
+ ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
+
+ /* initialize other endpoints */
+ for (i = 2; i < dev->ep_max; i++) {
+ ep = &dev->ep[i];
+ if (i % 2)
+ snprintf(name, sizeof(name), "ep%din", i / 2);
+ else
+ snprintf(name, sizeof(name), "ep%dout", i / 2);
+ ep->dev = dev;
+ strncpy(ep->name, name, sizeof(ep->name));
+ ep->ep.name = ep->name;
+
+ ep->ep.ops = &langwell_ep_ops;
+ ep->stopped = 0;
+ ep->ep.maxpacket = (unsigned short) ~0;
+ ep->ep_num = i / 2;
+
+ INIT_LIST_HEAD(&ep->queue);
+ list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
+
+ ep->dqh = &dev->ep_dqh[i];
+ }
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* enable interrupt and set controller to run state */
+static void langwell_udc_start(struct langwell_udc *dev)
+{
+ u32 usbintr, usbcmd;
+ DBG(dev, "---> %s()\n", __func__);
+
+ /* enable interrupts */
+ usbintr = INTR_ULPIE /* ULPI */
+ | INTR_SLE /* suspend */
+ /* | INTR_SRE SOF received */
+ | INTR_URE /* USB reset */
+ | INTR_AAE /* async advance */
+ | INTR_SEE /* system error */
+ | INTR_FRE /* frame list rollover */
+ | INTR_PCE /* port change detect */
+ | INTR_UEE /* USB error interrupt */
+ | INTR_UE; /* USB interrupt */
+ writel(usbintr, &dev->op_regs->usbintr);
+
+ /* clear stopped bit */
+ dev->stopped = 0;
+
+ /* set controller to run */
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ usbcmd |= CMD_RUNSTOP;
+ writel(usbcmd, &dev->op_regs->usbcmd);
+
+ DBG(dev, "<--- %s()\n", __func__);
+ return;
+}
+
+
+/* disable interrupt and set controller to stop state */
+static void langwell_udc_stop(struct langwell_udc *dev)
+{
+ u32 usbcmd;
+
+ DBG(dev, "---> %s()\n", __func__);
+
+ /* disable all interrupts */
+ writel(0, &dev->op_regs->usbintr);
+
+ /* set stopped bit */
+ dev->stopped = 1;
+
+ /* set controller to stop state */
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ usbcmd &= ~CMD_RUNSTOP;
+ writel(usbcmd, &dev->op_regs->usbcmd);
+
+ DBG(dev, "<--- %s()\n", __func__);
+ return;
+}
+
+
+/* stop all USB activities */
+static void stop_activity(struct langwell_udc *dev,
+ struct usb_gadget_driver *driver)
+{
+ struct langwell_ep *ep;
+ DBG(dev, "---> %s()\n", __func__);
+
+ nuke(&dev->ep[0], -ESHUTDOWN);
+
+ list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
+ nuke(ep, -ESHUTDOWN);
+ }
+
+ /* report disconnect; the driver is already quiesced */
+ if (driver) {
+ spin_unlock(&dev->lock);
+ driver->disconnect(&dev->gadget);
+ spin_lock(&dev->lock);
+ }
+
+ DBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* device "function" sysfs attribute file */
+static ssize_t show_function(struct device *_dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct langwell_udc *dev = the_controller;
+
+ if (!dev->driver || !dev->driver->function
+ || strlen(dev->driver->function) > PAGE_SIZE)
+ return 0;
+
+ return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function);
+}
+static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
+
+
+/* device "langwell_udc" sysfs attribute file */
+static ssize_t show_langwell_udc(struct device *_dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct langwell_udc *dev = the_controller;
+ struct langwell_request *req;
+ struct langwell_ep *ep = NULL;
+ char *next;
+ unsigned size;
+ unsigned t;
+ unsigned i;
+ unsigned long flags;
+ u32 tmp_reg;
+
+ next = buf;
+ size = PAGE_SIZE;
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* driver basic information */
+ t = scnprintf(next, size,
+ DRIVER_DESC "\n"
+ "%s version: %s\n"
+ "Gadget driver: %s\n\n",
+ driver_name, DRIVER_VERSION,
+ dev->driver ? dev->driver->driver.name : "(none)");
+ size -= t;
+ next += t;
+
+ /* device registers */
+ tmp_reg = readl(&dev->op_regs->usbcmd);
+ t = scnprintf(next, size,
+ "USBCMD reg:\n"
+ "SetupTW: %d\n"
+ "Run/Stop: %s\n\n",
+ (tmp_reg & CMD_SUTW) ? 1 : 0,
+ (tmp_reg & CMD_RUNSTOP) ? "Run" : "Stop");
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->usbsts);
+ t = scnprintf(next, size,
+ "USB Status Reg:\n"
+ "Device Suspend: %d\n"
+ "Reset Received: %d\n"
+ "System Error: %s\n"
+ "USB Error Interrupt: %s\n\n",
+ (tmp_reg & STS_SLI) ? 1 : 0,
+ (tmp_reg & STS_URI) ? 1 : 0,
+ (tmp_reg & STS_SEI) ? "Error" : "No error",
+ (tmp_reg & STS_UEI) ? "Error detected" : "No error");
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->usbintr);
+ t = scnprintf(next, size,
+ "USB Intrrupt Enable Reg:\n"
+ "Sleep Enable: %d\n"
+ "SOF Received Enable: %d\n"
+ "Reset Enable: %d\n"
+ "System Error Enable: %d\n"
+ "Port Change Dectected Enable: %d\n"
+ "USB Error Intr Enable: %d\n"
+ "USB Intr Enable: %d\n\n",
+ (tmp_reg & INTR_SLE) ? 1 : 0,
+ (tmp_reg & INTR_SRE) ? 1 : 0,
+ (tmp_reg & INTR_URE) ? 1 : 0,
+ (tmp_reg & INTR_SEE) ? 1 : 0,
+ (tmp_reg & INTR_PCE) ? 1 : 0,
+ (tmp_reg & INTR_UEE) ? 1 : 0,
+ (tmp_reg & INTR_UE) ? 1 : 0);
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->frindex);
+ t = scnprintf(next, size,
+ "USB Frame Index Reg:\n"
+ "Frame Number is 0x%08x\n\n",
+ (tmp_reg & FRINDEX_MASK));
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->deviceaddr);
+ t = scnprintf(next, size,
+ "USB Device Address Reg:\n"
+ "Device Addr is 0x%x\n\n",
+ USBADR(tmp_reg));
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->endpointlistaddr);
+ t = scnprintf(next, size,
+ "USB Endpoint List Address Reg:\n"
+ "Endpoint List Pointer is 0x%x\n\n",
+ EPBASE(tmp_reg));
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->portsc1);
+ t = scnprintf(next, size,
+ "USB Port Status & Control Reg:\n"
+ "Port Reset: %s\n"
+ "Port Suspend Mode: %s\n"
+ "Over-current Change: %s\n"
+ "Port Enable/Disable Change: %s\n"
+ "Port Enabled/Disabled: %s\n"
+ "Current Connect Status: %s\n\n",
+ (tmp_reg & PORTS_PR) ? "Reset" : "Not Reset",
+ (tmp_reg & PORTS_SUSP) ? "Suspend " : "Not Suspend",
+ (tmp_reg & PORTS_OCC) ? "Detected" : "No",
+ (tmp_reg & PORTS_PEC) ? "Changed" : "Not Changed",
+ (tmp_reg & PORTS_PE) ? "Enable" : "Not Correct",
+ (tmp_reg & PORTS_CCS) ? "Attached" : "Not Attached");
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->devlc);
+ t = scnprintf(next, size,
+ "Device LPM Control Reg:\n"
+ "Parallel Transceiver : %d\n"
+ "Serial Transceiver : %d\n"
+ "Port Speed: %s\n"
+ "Port Force Full Speed Connenct: %s\n"
+ "PHY Low Power Suspend Clock Disable: %s\n"
+ "BmAttributes: %d\n\n",
+ LPM_PTS(tmp_reg),
+ (tmp_reg & LPM_STS) ? 1 : 0,
+ ({
+ char *s;
+ switch (LPM_PSPD(tmp_reg)) {
+ case LPM_SPEED_FULL:
+ s = "Full Speed"; break;
+ case LPM_SPEED_LOW:
+ s = "Low Speed"; break;
+ case LPM_SPEED_HIGH:
+ s = "High Speed"; break;
+ default:
+ s = "Unknown Speed"; break;
+ }
+ s;
+ }),
+ (tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force",
+ (tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled",
+ LPM_BA(tmp_reg));
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->usbmode);
+ t = scnprintf(next, size,
+ "USB Mode Reg:\n"
+ "Controller Mode is : %s\n\n", ({
+ char *s;
+ switch (MODE_CM(tmp_reg)) {
+ case MODE_IDLE:
+ s = "Idle"; break;
+ case MODE_DEVICE:
+ s = "Device Controller"; break;
+ case MODE_HOST:
+ s = "Host Controller"; break;
+ default:
+ s = "None"; break;
+ }
+ s;
+ }));
+ size -= t;
+ next += t;
+
+ tmp_reg = readl(&dev->op_regs->endptsetupstat);
+ t = scnprintf(next, size,
+ "Endpoint Setup Status Reg:\n"
+ "SETUP on ep 0x%04x\n\n",
+ tmp_reg & SETUPSTAT_MASK);
+ size -= t;
+ next += t;
+
+ for (i = 0; i < dev->ep_max / 2; i++) {
+ tmp_reg = readl(&dev->op_regs->endptctrl[i]);
+ t = scnprintf(next, size, "EP Ctrl Reg [%d]: 0x%08x\n",
+ i, tmp_reg);
+ size -= t;
+ next += t;
+ }
+ tmp_reg = readl(&dev->op_regs->endptprime);
+ t = scnprintf(next, size, "EP Prime Reg: 0x%08x\n\n", tmp_reg);
+ size -= t;
+ next += t;
+
+ /* langwell_udc, langwell_ep, langwell_request structure information */
+ ep = &dev->ep[0];
+ t = scnprintf(next, size, "%s MaxPacketSize: 0x%x, ep_num: %d\n",
+ ep->ep.name, ep->ep.maxpacket, ep->ep_num);
+ size -= t;
+ next += t;
+
+ if (list_empty(&ep->queue)) {
+ t = scnprintf(next, size, "its req queue is empty\n\n");
+ size -= t;
+ next += t;
+ } else {
+ list_for_each_entry(req, &ep->queue, queue) {
+ t = scnprintf(next, size,
+ "req %p actual 0x%x length 0x%x buf %p\n",
+ &req->req, req->req.actual,
+ req->req.length, req->req.buf);
+ size -= t;
+ next += t;
+ }
+ }
+ /* other gadget->eplist ep */
+ list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
+ if (ep->desc) {
+ t = scnprintf(next, size,
+ "\n%s MaxPacketSize: 0x%x, "
+ "ep_num: %d\n",
+ ep->ep.name, ep->ep.maxpacket,
+ ep->ep_num);
+ size -= t;
+ next += t;
+
+ if (list_empty(&ep->queue)) {
+ t = scnprintf(next, size,
+ "its req queue is empty\n\n");
+ size -= t;
+ next += t;
+ } else {
+ list_for_each_entry(req, &ep->queue, queue) {
+ t = scnprintf(next, size,
+ "req %p actual 0x%x length "
+ "0x%x buf %p\n",
+ &req->req, req->req.actual,
+ req->req.length, req->req.buf);
+ size -= t;
+ next += t;
+ }
+ }
+ }
+ }
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+ return PAGE_SIZE - size;
+}
+static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL);
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * when a driver is successfully registered, it will receive
+ * control requests including set_configuration(), which enables
+ * non-control requests. then usb traffic follows until a
+ * disconnect is reported. then a host may connect again, or
+ * the driver might get unbound.
+ */
+
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+ struct langwell_udc *dev = the_controller;
+ unsigned long flags;
+ int retval;
+
+ if (!dev)
+ return -ENODEV;
+
+ DBG(dev, "---> %s()\n", __func__);
+
+ if (dev->driver)
+ return -EBUSY;
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* hook up the driver ... */
+ driver->driver.bus = NULL;
+ dev->driver = driver;
+ dev->gadget.dev.driver = &driver->driver;
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ retval = driver->bind(&dev->gadget);
+ if (retval) {
+ DBG(dev, "bind to driver %s --> %d\n",
+ driver->driver.name, retval);
+ dev->driver = NULL;
+ dev->gadget.dev.driver = NULL;
+ return retval;
+ }
+
+ retval = device_create_file(&dev->pdev->dev, &dev_attr_function);
+ if (retval)
+ goto err_unbind;
+
+ dev->usb_state = USB_STATE_ATTACHED;
+ dev->ep0_state = WAIT_FOR_SETUP;
+ dev->ep0_dir = USB_DIR_OUT;
+
+ /* enable interrupt and set controller to run state */
+ if (dev->got_irq)
+ langwell_udc_start(dev);
+
+ VDBG(dev, "After langwell_udc_start(), print all registers:\n");
+#ifdef VERBOSE
+ print_all_registers(dev);
+#endif
+
+ INFO(dev, "register driver: %s\n", driver->driver.name);
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+
+err_unbind:
+ driver->unbind(&dev->gadget);
+ dev->gadget.dev.driver = NULL;
+ dev->driver = NULL;
+
+ DBG(dev, "<--- %s()\n", __func__);
+ return retval;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+
+/* unregister gadget driver */
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+ struct langwell_udc *dev = the_controller;
+ unsigned long flags;
+
+ if (!dev)
+ return -ENODEV;
+
+ DBG(dev, "---> %s()\n", __func__);
+
+ if (unlikely(!driver || !driver->bind || !driver->unbind))
+ return -EINVAL;
+
+ /* unbind OTG transceiver */
+ if (dev->transceiver)
+ (void)otg_set_peripheral(dev->transceiver, 0);
+
+ /* disable interrupt and set controller to stop state */
+ langwell_udc_stop(dev);
+
+ dev->usb_state = USB_STATE_ATTACHED;
+ dev->ep0_state = WAIT_FOR_SETUP;
+ dev->ep0_dir = USB_DIR_OUT;
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* stop all usb activities */
+ dev->gadget.speed = USB_SPEED_UNKNOWN;
+ stop_activity(dev, driver);
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ /* unbind gadget driver */
+ driver->unbind(&dev->gadget);
+ dev->gadget.dev.driver = NULL;
+ dev->driver = NULL;
+
+ device_remove_file(&dev->pdev->dev, &dev_attr_function);
+
+ INFO(dev, "unregistered driver '%s'\n", driver->driver.name);
+ DBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * setup tripwire is used as a semaphore to ensure that the setup data
+ * payload is extracted from a dQH without being corrupted
+ */
+static void setup_tripwire(struct langwell_udc *dev)
+{
+ u32 usbcmd,
+ endptsetupstat;
+ unsigned long timeout;
+ struct langwell_dqh *dqh;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* ep0 OUT dQH */
+ dqh = &dev->ep_dqh[EP_DIR_OUT];
+
+ /* Write-Clear endptsetupstat */
+ endptsetupstat = readl(&dev->op_regs->endptsetupstat);
+ writel(endptsetupstat, &dev->op_regs->endptsetupstat);
+
+ /* wait until endptsetupstat is cleared */
+ timeout = jiffies + SETUPSTAT_TIMEOUT;
+ while (readl(&dev->op_regs->endptsetupstat)) {
+ if (time_after(jiffies, timeout)) {
+ ERROR(dev, "setup_tripwire timeout\n");
+ break;
+ }
+ cpu_relax();
+ }
+
+ /* while a hazard exists when setup packet arrives */
+ do {
+ /* set setup tripwire bit */
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ writel(usbcmd | CMD_SUTW, &dev->op_regs->usbcmd);
+
+ /* copy the setup packet to local buffer */
+ memcpy(&dev->local_setup_buff, &dqh->dqh_setup, 8);
+ } while (!(readl(&dev->op_regs->usbcmd) & CMD_SUTW));
+
+ /* Write-Clear setup tripwire bit */
+ usbcmd = readl(&dev->op_regs->usbcmd);
+ writel(usbcmd & ~CMD_SUTW, &dev->op_regs->usbcmd);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* protocol ep0 stall, will automatically be cleared on new transaction */
+static void ep0_stall(struct langwell_udc *dev)
+{
+ u32 endptctrl;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* set TX and RX to stall */
+ endptctrl = readl(&dev->op_regs->endptctrl[0]);
+ endptctrl |= EPCTRL_TXS | EPCTRL_RXS;
+ writel(endptctrl, &dev->op_regs->endptctrl[0]);
+
+ /* update ep0 state */
+ dev->ep0_state = WAIT_FOR_SETUP;
+ dev->ep0_dir = USB_DIR_OUT;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* PRIME a status phase for ep0 */
+static int prime_status_phase(struct langwell_udc *dev, int dir)
+{
+ struct langwell_request *req;
+ struct langwell_ep *ep;
+ int status = 0;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (dir == EP_DIR_IN)
+ dev->ep0_dir = USB_DIR_IN;
+ else
+ dev->ep0_dir = USB_DIR_OUT;
+
+ ep = &dev->ep[0];
+ dev->ep0_state = WAIT_FOR_OUT_STATUS;
+
+ req = dev->status_req;
+
+ req->ep = ep;
+ req->req.length = 0;
+ req->req.status = -EINPROGRESS;
+ req->req.actual = 0;
+ req->req.complete = NULL;
+ req->dtd_count = 0;
+
+ if (!req_to_dtd(req))
+ status = queue_dtd(ep, req);
+ else
+ return -ENOMEM;
+
+ if (status)
+ ERROR(dev, "can't queue ep0 status request\n");
+
+ list_add_tail(&req->queue, &ep->queue);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return status;
+}
+
+
+/* SET_ADDRESS request routine */
+static void set_address(struct langwell_udc *dev, u16 value,
+ u16 index, u16 length)
+{
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* save the new address to device struct */
+ dev->dev_addr = (u8) value;
+ VDBG(dev, "dev->dev_addr = %d\n", dev->dev_addr);
+
+ /* update usb state */
+ dev->usb_state = USB_STATE_ADDRESS;
+
+ /* STATUS phase */
+ if (prime_status_phase(dev, EP_DIR_IN))
+ ep0_stall(dev);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* return endpoint by windex */
+static struct langwell_ep *get_ep_by_windex(struct langwell_udc *dev,
+ u16 wIndex)
+{
+ struct langwell_ep *ep;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
+ return &dev->ep[0];
+
+ list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
+ u8 bEndpointAddress;
+ if (!ep->desc)
+ continue;
+
+ bEndpointAddress = ep->desc->bEndpointAddress;
+ if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
+ continue;
+
+ if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
+ == (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
+ return ep;
+ }
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return NULL;
+}
+
+
+/* return whether endpoint is stalled, 0: not stalled; 1: stalled */
+static int ep_is_stall(struct langwell_ep *ep)
+{
+ struct langwell_udc *dev = ep->dev;
+ u32 endptctrl;
+ int retval;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ endptctrl = readl(&dev->op_regs->endptctrl[ep->ep_num]);
+ if (is_in(ep))
+ retval = endptctrl & EPCTRL_TXS ? 1 : 0;
+ else
+ retval = endptctrl & EPCTRL_RXS ? 1 : 0;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return retval;
+}
+
+
+/* GET_STATUS request routine */
+static void get_status(struct langwell_udc *dev, u8 request_type, u16 value,
+ u16 index, u16 length)
+{
+ struct langwell_request *req;
+ struct langwell_ep *ep;
+ u16 status_data = 0; /* 16 bits cpu view status data */
+ int status = 0;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ ep = &dev->ep[0];
+
+ if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
+ /* get device status */
+ status_data = 1 << USB_DEVICE_SELF_POWERED;
+ status_data |= dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+ } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
+ /* get interface status */
+ status_data = 0;
+ } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
+ /* get endpoint status */
+ struct langwell_ep *epn;
+ epn = get_ep_by_windex(dev, index);
+ /* stall if endpoint doesn't exist */
+ if (!epn)
+ goto stall;
+
+ status_data = ep_is_stall(epn) << USB_ENDPOINT_HALT;
+ }
+
+ dev->ep0_dir = USB_DIR_IN;
+
+ /* borrow the per device status_req */
+ req = dev->status_req;
+
+ /* fill in the reqest structure */
+ *((u16 *) req->req.buf) = cpu_to_le16(status_data);
+ req->ep = ep;
+ req->req.length = 2;
+ req->req.status = -EINPROGRESS;
+ req->req.actual = 0;
+ req->req.complete = NULL;
+ req->dtd_count = 0;
+
+ /* prime the data phase */
+ if (!req_to_dtd(req))
+ status = queue_dtd(ep, req);
+ else /* no mem */
+ goto stall;
+
+ if (status) {
+ ERROR(dev, "response error on GET_STATUS request\n");
+ goto stall;
+ }
+
+ list_add_tail(&req->queue, &ep->queue);
+ dev->ep0_state = DATA_STATE_XMIT;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return;
+stall:
+ ep0_stall(dev);
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* setup packet interrupt handler */
+static void handle_setup_packet(struct langwell_udc *dev,
+ struct usb_ctrlrequest *setup)
+{
+ u16 wValue = le16_to_cpu(setup->wValue);
+ u16 wIndex = le16_to_cpu(setup->wIndex);
+ u16 wLength = le16_to_cpu(setup->wLength);
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* ep0 fifo flush */
+ nuke(&dev->ep[0], -ESHUTDOWN);
+
+ DBG(dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+ setup->bRequestType, setup->bRequest,
+ wValue, wIndex, wLength);
+
+ /* RNDIS gadget delegate */
+ if ((setup->bRequestType == 0x21) && (setup->bRequest == 0x00)) {
+ /* USB_CDC_SEND_ENCAPSULATED_COMMAND */
+ goto delegate;
+ }
+
+ /* USB_CDC_GET_ENCAPSULATED_RESPONSE */
+ if ((setup->bRequestType == 0xa1) && (setup->bRequest == 0x01)) {
+ /* USB_CDC_GET_ENCAPSULATED_RESPONSE */
+ goto delegate;
+ }
+
+ /* We process some stardard setup requests here */
+ switch (setup->bRequest) {
+ case USB_REQ_GET_STATUS:
+ DBG(dev, "SETUP: USB_REQ_GET_STATUS\n");
+ /* get status, DATA and STATUS phase */
+ if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
+ != (USB_DIR_IN | USB_TYPE_STANDARD))
+ break;
+ get_status(dev, setup->bRequestType, wValue, wIndex, wLength);
+ goto end;
+
+ case USB_REQ_SET_ADDRESS:
+ DBG(dev, "SETUP: USB_REQ_SET_ADDRESS\n");
+ /* STATUS phase */
+ if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
+ | USB_RECIP_DEVICE))
+ break;
+ set_address(dev, wValue, wIndex, wLength);
+ goto end;
+
+ case USB_REQ_CLEAR_FEATURE:
+ case USB_REQ_SET_FEATURE:
+ /* STATUS phase */
+ {
+ int rc = -EOPNOTSUPP;
+ if (setup->bRequest == USB_REQ_SET_FEATURE)
+ DBG(dev, "SETUP: USB_REQ_SET_FEATURE\n");
+ else if (setup->bRequest == USB_REQ_CLEAR_FEATURE)
+ DBG(dev, "SETUP: USB_REQ_CLEAR_FEATURE\n");
+
+ if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK))
+ == (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) {
+ struct langwell_ep *epn;
+ epn = get_ep_by_windex(dev, wIndex);
+ /* stall if endpoint doesn't exist */
+ if (!epn) {
+ ep0_stall(dev);
+ goto end;
+ }
+
+ if (wValue != 0 || wLength != 0
+ || epn->ep_num > dev->ep_max)
+ break;
+
+ spin_unlock(&dev->lock);
+ rc = langwell_ep_set_halt(&epn->ep,
+ (setup->bRequest == USB_REQ_SET_FEATURE)
+ ? 1 : 0);
+ spin_lock(&dev->lock);
+
+ } else if ((setup->bRequestType & (USB_RECIP_MASK
+ | USB_TYPE_MASK)) == (USB_RECIP_DEVICE
+ | USB_TYPE_STANDARD)) {
+ if (!gadget_is_otg(&dev->gadget))
+ break;
+ else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) {
+ dev->gadget.b_hnp_enable = 1;
+#ifdef OTG_TRANSCEIVER
+ if (!dev->lotg->otg.default_a)
+ dev->lotg->hsm.b_hnp_enable = 1;
+#endif
+ } else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
+ dev->gadget.a_hnp_support = 1;
+ else if (setup->bRequest ==
+ USB_DEVICE_A_ALT_HNP_SUPPORT)
+ dev->gadget.a_alt_hnp_support = 1;
+ else
+ break;
+ rc = 0;
+ } else
+ break;
+
+ if (rc == 0) {
+ if (prime_status_phase(dev, EP_DIR_IN))
+ ep0_stall(dev);
+ }
+ goto end;
+ }
+
+ case USB_REQ_GET_DESCRIPTOR:
+ DBG(dev, "SETUP: USB_REQ_GET_DESCRIPTOR\n");
+ goto delegate;
+
+ case USB_REQ_SET_DESCRIPTOR:
+ DBG(dev, "SETUP: USB_REQ_SET_DESCRIPTOR unsupported\n");
+ goto delegate;
+
+ case USB_REQ_GET_CONFIGURATION:
+ DBG(dev, "SETUP: USB_REQ_GET_CONFIGURATION\n");
+ goto delegate;
+
+ case USB_REQ_SET_CONFIGURATION:
+ DBG(dev, "SETUP: USB_REQ_SET_CONFIGURATION\n");
+ goto delegate;
+
+ case USB_REQ_GET_INTERFACE:
+ DBG(dev, "SETUP: USB_REQ_GET_INTERFACE\n");
+ goto delegate;
+
+ case USB_REQ_SET_INTERFACE:
+ DBG(dev, "SETUP: USB_REQ_SET_INTERFACE\n");
+ goto delegate;
+
+ case USB_REQ_SYNCH_FRAME:
+ DBG(dev, "SETUP: USB_REQ_SYNCH_FRAME unsupported\n");
+ goto delegate;
+
+ default:
+ /* delegate USB standard requests to the gadget driver */
+ goto delegate;
+delegate:
+ /* USB requests handled by gadget */
+ if (wLength) {
+ /* DATA phase from gadget, STATUS phase from udc */
+ dev->ep0_dir = (setup->bRequestType & USB_DIR_IN)
+ ? USB_DIR_IN : USB_DIR_OUT;
+ VDBG(dev, "dev->ep0_dir = 0x%x, wLength = %d\n",
+ dev->ep0_dir, wLength);
+ spin_unlock(&dev->lock);
+ if (dev->driver->setup(&dev->gadget,
+ &dev->local_setup_buff) < 0)
+ ep0_stall(dev);
+ spin_lock(&dev->lock);
+ dev->ep0_state = (setup->bRequestType & USB_DIR_IN)
+ ? DATA_STATE_XMIT : DATA_STATE_RECV;
+ } else {
+ /* no DATA phase, IN STATUS phase from gadget */
+ dev->ep0_dir = USB_DIR_IN;
+ VDBG(dev, "dev->ep0_dir = 0x%x, wLength = %d\n",
+ dev->ep0_dir, wLength);
+ spin_unlock(&dev->lock);
+ if (dev->driver->setup(&dev->gadget,
+ &dev->local_setup_buff) < 0)
+ ep0_stall(dev);
+ spin_lock(&dev->lock);
+ dev->ep0_state = WAIT_FOR_OUT_STATUS;
+ }
+ break;
+ }
+end:
+ VDBG(dev, "<--- %s()\n", __func__);
+ return;
+}
+
+
+/* transfer completion, process endpoint request and free the completed dTDs
+ * for this request
+ */
+static int process_ep_req(struct langwell_udc *dev, int index,
+ struct langwell_request *curr_req)
+{
+ struct langwell_dtd *curr_dtd;
+ struct langwell_dqh *curr_dqh;
+ int td_complete, actual, remaining_length;
+ int i, dir;
+ u8 dtd_status = 0;
+ int retval = 0;
+
+ curr_dqh = &dev->ep_dqh[index];
+ dir = index % 2;
+
+ curr_dtd = curr_req->head;
+ td_complete = 0;
+ actual = curr_req->req.length;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ for (i = 0; i < curr_req->dtd_count; i++) {
+ remaining_length = le16_to_cpu(curr_dtd->dtd_total);
+ actual -= remaining_length;
+
+ /* command execution states by dTD */
+ dtd_status = curr_dtd->dtd_status;
+
+ if (!dtd_status) {
+ /* transfers completed successfully */
+ if (!remaining_length) {
+ td_complete++;
+ VDBG(dev, "dTD transmitted successfully\n");
+ } else {
+ if (dir) {
+ VDBG(dev, "TX dTD remains data\n");
+ retval = -EPROTO;
+ break;
+
+ } else {
+ td_complete++;
+ break;
+ }
+ }
+ } else {
+ /* transfers completed with errors */
+ if (dtd_status & DTD_STS_ACTIVE) {
+ DBG(dev, "request not completed\n");
+ retval = 1;
+ return retval;
+ } else if (dtd_status & DTD_STS_HALTED) {
+ ERROR(dev, "dTD error %08x dQH[%d]\n",
+ dtd_status, index);
+ /* clear the errors and halt condition */
+ curr_dqh->dtd_status = 0;
+ retval = -EPIPE;
+ break;
+ } else if (dtd_status & DTD_STS_DBE) {
+ DBG(dev, "data buffer (overflow) error\n");
+ retval = -EPROTO;
+ break;
+ } else if (dtd_status & DTD_STS_TRE) {
+ DBG(dev, "transaction(ISO) error\n");
+ retval = -EILSEQ;
+ break;
+ } else
+ ERROR(dev, "unknown error (0x%x)!\n",
+ dtd_status);
+ }
+
+ if (i != curr_req->dtd_count - 1)
+ curr_dtd = (struct langwell_dtd *)
+ curr_dtd->next_dtd_virt;
+ }
+
+ if (retval)
+ return retval;
+
+ curr_req->req.actual = actual;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* complete DATA or STATUS phase of ep0 prime status phase if needed */
+static void ep0_req_complete(struct langwell_udc *dev,
+ struct langwell_ep *ep0, struct langwell_request *req)
+{
+ u32 new_addr;
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (dev->usb_state == USB_STATE_ADDRESS) {
+ /* set the new address */
+ new_addr = (u32)dev->dev_addr;
+ writel(new_addr << USBADR_SHIFT, &dev->op_regs->deviceaddr);
+
+ new_addr = USBADR(readl(&dev->op_regs->deviceaddr));
+ VDBG(dev, "new_addr = %d\n", new_addr);
+ }
+
+ done(ep0, req, 0);
+
+ switch (dev->ep0_state) {
+ case DATA_STATE_XMIT:
+ /* receive status phase */
+ if (prime_status_phase(dev, EP_DIR_OUT))
+ ep0_stall(dev);
+ break;
+ case DATA_STATE_RECV:
+ /* send status phase */
+ if (prime_status_phase(dev, EP_DIR_IN))
+ ep0_stall(dev);
+ break;
+ case WAIT_FOR_OUT_STATUS:
+ dev->ep0_state = WAIT_FOR_SETUP;
+ break;
+ case WAIT_FOR_SETUP:
+ ERROR(dev, "unexpect ep0 packets\n");
+ break;
+ default:
+ ep0_stall(dev);
+ break;
+ }
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* USB transfer completion interrupt */
+static void handle_trans_complete(struct langwell_udc *dev)
+{
+ u32 complete_bits;
+ int i, ep_num, dir, bit_mask, status;
+ struct langwell_ep *epn;
+ struct langwell_request *curr_req, *temp_req;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ complete_bits = readl(&dev->op_regs->endptcomplete);
+ VDBG(dev, "endptcomplete register: 0x%08x\n", complete_bits);
+
+ /* Write-Clear the bits in endptcomplete register */
+ writel(complete_bits, &dev->op_regs->endptcomplete);
+
+ if (!complete_bits) {
+ DBG(dev, "complete_bits = 0\n");
+ goto done;
+ }
+
+ for (i = 0; i < dev->ep_max; i++) {
+ ep_num = i / 2;
+ dir = i % 2;
+
+ bit_mask = 1 << (ep_num + 16 * dir);
+
+ if (!(complete_bits & bit_mask))
+ continue;
+
+ /* ep0 */
+ if (i == 1)
+ epn = &dev->ep[0];
+ else
+ epn = &dev->ep[i];
+
+ if (epn->name == NULL) {
+ WARNING(dev, "invalid endpoint\n");
+ continue;
+ }
+
+ if (i < 2)
+ /* ep0 in and out */
+ DBG(dev, "%s-%s transfer completed\n",
+ epn->name,
+ is_in(epn) ? "in" : "out");
+ else
+ DBG(dev, "%s transfer completed\n", epn->name);
+
+ /* process the req queue until an uncomplete request */
+ list_for_each_entry_safe(curr_req, temp_req,
+ &epn->queue, queue) {
+ status = process_ep_req(dev, i, curr_req);
+ VDBG(dev, "%s req status: %d\n", epn->name, status);
+
+ if (status)
+ break;
+
+ /* write back status to req */
+ curr_req->req.status = status;
+
+ /* ep0 request completion */
+ if (ep_num == 0) {
+ ep0_req_complete(dev, epn, curr_req);
+ break;
+ } else {
+ done(epn, curr_req, status);
+ }
+ }
+ }
+done:
+ VDBG(dev, "<--- %s()\n", __func__);
+ return;
+}
+
+
+/* port change detect interrupt handler */
+static void handle_port_change(struct langwell_udc *dev)
+{
+ u32 portsc1, devlc;
+ u32 speed;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (dev->bus_reset)
+ dev->bus_reset = 0;
+
+ portsc1 = readl(&dev->op_regs->portsc1);
+ devlc = readl(&dev->op_regs->devlc);
+ VDBG(dev, "portsc1 = 0x%08x, devlc = 0x%08x\n",
+ portsc1, devlc);
+
+ /* bus reset is finished */
+ if (!(portsc1 & PORTS_PR)) {
+ /* get the speed */
+ speed = LPM_PSPD(devlc);
+ switch (speed) {
+ case LPM_SPEED_HIGH:
+ dev->gadget.speed = USB_SPEED_HIGH;
+ break;
+ case LPM_SPEED_FULL:
+ dev->gadget.speed = USB_SPEED_FULL;
+ break;
+ case LPM_SPEED_LOW:
+ dev->gadget.speed = USB_SPEED_LOW;
+ break;
+ default:
+ dev->gadget.speed = USB_SPEED_UNKNOWN;
+ break;
+ }
+ VDBG(dev, "speed = %d, dev->gadget.speed = %d\n",
+ speed, dev->gadget.speed);
+ }
+
+ /* LPM L0 to L1 */
+ if (dev->lpm && dev->lpm_state == LPM_L0)
+ if (portsc1 & PORTS_SUSP && portsc1 & PORTS_SLP) {
+ INFO(dev, "LPM L0 to L1\n");
+ dev->lpm_state = LPM_L1;
+ }
+
+ /* LPM L1 to L0, force resume or remote wakeup finished */
+ if (dev->lpm && dev->lpm_state == LPM_L1)
+ if (!(portsc1 & PORTS_SUSP)) {
+ if (portsc1 & PORTS_SLP)
+ INFO(dev, "LPM L1 to L0, force resume\n");
+ else
+ INFO(dev, "LPM L1 to L0, remote wakeup\n");
+
+ dev->lpm_state = LPM_L0;
+ }
+
+ /* update USB state */
+ if (!dev->resume_state)
+ dev->usb_state = USB_STATE_DEFAULT;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* USB reset interrupt handler */
+static void handle_usb_reset(struct langwell_udc *dev)
+{
+ u32 deviceaddr,
+ endptsetupstat,
+ endptcomplete;
+ unsigned long timeout;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ /* Write-Clear the device address */
+ deviceaddr = readl(&dev->op_regs->deviceaddr);
+ writel(deviceaddr & ~USBADR_MASK, &dev->op_regs->deviceaddr);
+
+ dev->dev_addr = 0;
+
+ /* clear usb state */
+ dev->resume_state = 0;
+
+ /* LPM L1 to L0, reset */
+ if (dev->lpm)
+ dev->lpm_state = LPM_L0;
+
+ dev->ep0_dir = USB_DIR_OUT;
+ dev->ep0_state = WAIT_FOR_SETUP;
+ dev->remote_wakeup = 0; /* default to 0 on reset */
+ dev->gadget.b_hnp_enable = 0;
+ dev->gadget.a_hnp_support = 0;
+ dev->gadget.a_alt_hnp_support = 0;
+
+ /* Write-Clear all the setup token semaphores */
+ endptsetupstat = readl(&dev->op_regs->endptsetupstat);
+ writel(endptsetupstat, &dev->op_regs->endptsetupstat);
+
+ /* Write-Clear all the endpoint complete status bits */
+ endptcomplete = readl(&dev->op_regs->endptcomplete);
+ writel(endptcomplete, &dev->op_regs->endptcomplete);
+
+ /* wait until all endptprime bits cleared */
+ timeout = jiffies + PRIME_TIMEOUT;
+ while (readl(&dev->op_regs->endptprime)) {
+ if (time_after(jiffies, timeout)) {
+ ERROR(dev, "USB reset timeout\n");
+ break;
+ }
+ cpu_relax();
+ }
+
+ /* write 1s to endptflush register to clear any primed buffers */
+ writel((u32) ~0, &dev->op_regs->endptflush);
+
+ if (readl(&dev->op_regs->portsc1) & PORTS_PR) {
+ VDBG(dev, "USB bus reset\n");
+ /* bus is reseting */
+ dev->bus_reset = 1;
+
+ /* reset all the queues, stop all USB activities */
+ stop_activity(dev, dev->driver);
+ dev->usb_state = USB_STATE_DEFAULT;
+ } else {
+ VDBG(dev, "device controller reset\n");
+ /* controller reset */
+ langwell_udc_reset(dev);
+
+ /* reset all the queues, stop all USB activities */
+ stop_activity(dev, dev->driver);
+
+ /* reset ep0 dQH and endptctrl */
+ ep0_reset(dev);
+
+ /* enable interrupt and set controller to run state */
+ langwell_udc_start(dev);
+
+ dev->usb_state = USB_STATE_ATTACHED;
+ }
+
+#ifdef OTG_TRANSCEIVER
+ /* refer to USB OTG 6.6.2.3 b_hnp_en is cleared */
+ if (!dev->lotg->otg.default_a)
+ dev->lotg->hsm.b_hnp_enable = 0;
+#endif
+
+ VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* USB bus suspend/resume interrupt */
+static void handle_bus_suspend(struct langwell_udc *dev)
+{
+ u32 devlc;
+ DBG(dev, "---> %s()\n", __func__);
+
+ dev->resume_state = dev->usb_state;
+ dev->usb_state = USB_STATE_SUSPENDED;
+
+#ifdef OTG_TRANSCEIVER
+ if (dev->lotg->otg.default_a) {
+ if (dev->lotg->hsm.b_bus_suspend_vld == 1) {
+ dev->lotg->hsm.b_bus_suspend = 1;
+ /* notify transceiver the state changes */
+ if (spin_trylock(&dev->lotg->wq_lock)) {
+ langwell_update_transceiver();
+ spin_unlock(&dev->lotg->wq_lock);
+ }
+ }
+ dev->lotg->hsm.b_bus_suspend_vld++;
+ } else {
+ if (!dev->lotg->hsm.a_bus_suspend) {
+ dev->lotg->hsm.a_bus_suspend = 1;
+ /* notify transceiver the state changes */
+ if (spin_trylock(&dev->lotg->wq_lock)) {
+ langwell_update_transceiver();
+ spin_unlock(&dev->lotg->wq_lock);
+ }
+ }
+ }
+#endif
+
+ /* report suspend to the driver */
+ if (dev->driver) {
+ if (dev->driver->suspend) {
+ spin_unlock(&dev->lock);
+ dev->driver->suspend(&dev->gadget);
+ spin_lock(&dev->lock);
+ DBG(dev, "suspend %s\n", dev->driver->driver.name);
+ }
+ }
+
+ /* enter PHY low power suspend */
+ devlc = readl(&dev->op_regs->devlc);
+ VDBG(dev, "devlc = 0x%08x\n", devlc);
+ devlc |= LPM_PHCD;
+ writel(devlc, &dev->op_regs->devlc);
+
+ DBG(dev, "<--- %s()\n", __func__);
+}
+
+
+static void handle_bus_resume(struct langwell_udc *dev)
+{
+ u32 devlc;
+ DBG(dev, "---> %s()\n", __func__);
+
+ dev->usb_state = dev->resume_state;
+ dev->resume_state = 0;
+
+ /* exit PHY low power suspend */
+ devlc = readl(&dev->op_regs->devlc);
+ VDBG(dev, "devlc = 0x%08x\n", devlc);
+ devlc &= ~LPM_PHCD;
+ writel(devlc, &dev->op_regs->devlc);
+
+#ifdef OTG_TRANSCEIVER
+ if (dev->lotg->otg.default_a == 0)
+ dev->lotg->hsm.a_bus_suspend = 0;
+#endif
+
+ /* report resume to the driver */
+ if (dev->driver) {
+ if (dev->driver->resume) {
+ spin_unlock(&dev->lock);
+ dev->driver->resume(&dev->gadget);
+ spin_lock(&dev->lock);
+ DBG(dev, "resume %s\n", dev->driver->driver.name);
+ }
+ }
+
+ DBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* USB device controller interrupt handler */
+static irqreturn_t langwell_irq(int irq, void *_dev)
+{
+ struct langwell_udc *dev = _dev;
+ u32 usbsts,
+ usbintr,
+ irq_sts,
+ portsc1;
+
+ VDBG(dev, "---> %s()\n", __func__);
+
+ if (dev->stopped) {
+ VDBG(dev, "handle IRQ_NONE\n");
+ VDBG(dev, "<--- %s()\n", __func__);
+ return IRQ_NONE;
+ }
+
+ spin_lock(&dev->lock);
+
+ /* USB status */
+ usbsts = readl(&dev->op_regs->usbsts);
+
+ /* USB interrupt enable */
+ usbintr = readl(&dev->op_regs->usbintr);
+
+ irq_sts = usbsts & usbintr;
+ VDBG(dev, "usbsts = 0x%08x, usbintr = 0x%08x, irq_sts = 0x%08x\n",
+ usbsts, usbintr, irq_sts);
+
+ if (!irq_sts) {
+ VDBG(dev, "handle IRQ_NONE\n");
+ VDBG(dev, "<--- %s()\n", __func__);
+ spin_unlock(&dev->lock);
+ return IRQ_NONE;
+ }
+
+ /* Write-Clear interrupt status bits */
+ writel(irq_sts, &dev->op_regs->usbsts);
+
+ /* resume from suspend */
+ portsc1 = readl(&dev->op_regs->portsc1);
+ if (dev->usb_state == USB_STATE_SUSPENDED)
+ if (!(portsc1 & PORTS_SUSP))
+ handle_bus_resume(dev);
+
+ /* USB interrupt */
+ if (irq_sts & STS_UI) {
+ VDBG(dev, "USB interrupt\n");
+
+ /* setup packet received from ep0 */
+ if (readl(&dev->op_regs->endptsetupstat)
+ & EP0SETUPSTAT_MASK) {
+ VDBG(dev, "USB SETUP packet received interrupt\n");
+ /* setup tripwire semaphone */
+ setup_tripwire(dev);
+ handle_setup_packet(dev, &dev->local_setup_buff);
+ }
+
+ /* USB transfer completion */
+ if (readl(&dev->op_regs->endptcomplete)) {
+ VDBG(dev, "USB transfer completion interrupt\n");
+ handle_trans_complete(dev);
+ }
+ }
+
+ /* SOF received interrupt (for ISO transfer) */
+ if (irq_sts & STS_SRI) {
+ /* FIXME */
+ /* VDBG(dev, "SOF received interrupt\n"); */
+ }
+
+ /* port change detect interrupt */
+ if (irq_sts & STS_PCI) {
+ VDBG(dev, "port change detect interrupt\n");
+ handle_port_change(dev);
+ }
+
+ /* suspend interrrupt */
+ if (irq_sts & STS_SLI) {
+ VDBG(dev, "suspend interrupt\n");
+ handle_bus_suspend(dev);
+ }
+
+ /* USB reset interrupt */
+ if (irq_sts & STS_URI) {
+ VDBG(dev, "USB reset interrupt\n");
+ handle_usb_reset(dev);
+ }
+
+ /* USB error or system error interrupt */
+ if (irq_sts & (STS_UEI | STS_SEI)) {
+ /* FIXME */
+ WARNING(dev, "error IRQ, irq_sts: %x\n", irq_sts);
+ }
+
+ spin_unlock(&dev->lock);
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return IRQ_HANDLED;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* release device structure */
+static void gadget_release(struct device *_dev)
+{
+ struct langwell_udc *dev = the_controller;
+
+ DBG(dev, "---> %s()\n", __func__);
+
+ complete(dev->done);
+
+ DBG(dev, "<--- %s()\n", __func__);
+ kfree(dev);
+}
+
+
+/* tear down the binding between this driver and the pci device */
+static void langwell_udc_remove(struct pci_dev *pdev)
+{
+ struct langwell_udc *dev = the_controller;
+
+ DECLARE_COMPLETION(done);
+
+ BUG_ON(dev->driver);
+ DBG(dev, "---> %s()\n", __func__);
+
+ dev->done = &done;
+
+ /* free memory allocated in probe */
+ if (dev->dtd_pool)
+ dma_pool_destroy(dev->dtd_pool);
+
+ if (dev->status_req) {
+ kfree(dev->status_req->req.buf);
+ kfree(dev->status_req);
+ }
+
+ if (dev->ep_dqh)
+ dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
+ dev->ep_dqh, dev->ep_dqh_dma);
+
+ kfree(dev->ep);
+
+ /* diable IRQ handler */
+ if (dev->got_irq)
+ free_irq(pdev->irq, dev);
+
+#ifndef OTG_TRANSCEIVER
+ if (dev->cap_regs)
+ iounmap(dev->cap_regs);
+
+ if (dev->region)
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+
+ if (dev->enabled)
+ pci_disable_device(pdev);
+#else
+ if (dev->transceiver) {
+ otg_put_transceiver(dev->transceiver);
+ dev->transceiver = NULL;
+ dev->lotg = NULL;
+ }
+#endif
+
+ dev->cap_regs = NULL;
+
+ INFO(dev, "unbind\n");
+ DBG(dev, "<--- %s()\n", __func__);
+
+ device_unregister(&dev->gadget.dev);
+ device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
+
+#ifndef OTG_TRANSCEIVER
+ pci_set_drvdata(pdev, NULL);
+#endif
+
+ /* free dev, wait for the release() finished */
+ wait_for_completion(&done);
+
+ the_controller = NULL;
+}
+
+
+/*
+ * wrap this driver around the specified device, but
+ * don't respond over USB until a gadget driver binds to us.
+ */
+static int langwell_udc_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct langwell_udc *dev;
+#ifndef OTG_TRANSCEIVER
+ unsigned long resource, len;
+#endif
+ void __iomem *base = NULL;
+ size_t size;
+ int retval;
+
+ if (the_controller) {
+ dev_warn(&pdev->dev, "ignoring\n");
+ return -EBUSY;
+ }
+
+ /* alloc, and start init */
+ dev = kzalloc(sizeof *dev, GFP_KERNEL);
+ if (dev == NULL) {
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ /* initialize device spinlock */
+ spin_lock_init(&dev->lock);
+
+ dev->pdev = pdev;
+ DBG(dev, "---> %s()\n", __func__);
+
+#ifdef OTG_TRANSCEIVER
+ /* PCI device is already enabled by otg_transceiver driver */
+ dev->enabled = 1;
+
+ /* mem region and register base */
+ dev->region = 1;
+ dev->transceiver = otg_get_transceiver();
+ dev->lotg = otg_to_langwell(dev->transceiver);
+ base = dev->lotg->regs;
+#else
+ pci_set_drvdata(pdev, dev);
+
+ /* now all the pci goodies ... */
+ if (pci_enable_device(pdev) < 0) {
+ retval = -ENODEV;
+ goto error;
+ }
+ dev->enabled = 1;
+
+ /* control register: BAR 0 */
+ resource = pci_resource_start(pdev, 0);
+ len = pci_resource_len(pdev, 0);
+ if (!request_mem_region(resource, len, driver_name)) {
+ ERROR(dev, "controller already in use\n");
+ retval = -EBUSY;
+ goto error;
+ }
+ dev->region = 1;
+
+ base = ioremap_nocache(resource, len);
+#endif
+ if (base == NULL) {
+ ERROR(dev, "can't map memory\n");
+ retval = -EFAULT;
+ goto error;
+ }
+
+ dev->cap_regs = (struct langwell_cap_regs __iomem *) base;
+ VDBG(dev, "dev->cap_regs: %p\n", dev->cap_regs);
+ dev->op_regs = (struct langwell_op_regs __iomem *)
+ (base + OP_REG_OFFSET);
+ VDBG(dev, "dev->op_regs: %p\n", dev->op_regs);
+
+ /* irq setup after old hardware is cleaned up */
+ if (!pdev->irq) {
+ ERROR(dev, "No IRQ. Check PCI setup!\n");
+ retval = -ENODEV;
+ goto error;
+ }
+
+#ifndef OTG_TRANSCEIVER
+ INFO(dev, "irq %d, io mem: 0x%08lx, len: 0x%08lx, pci mem 0x%p\n",
+ pdev->irq, resource, len, base);
+ /* enables bus-mastering for device dev */
+ pci_set_master(pdev);
+
+ if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
+ driver_name, dev) != 0) {
+ ERROR(dev, "request interrupt %d failed\n", pdev->irq);
+ retval = -EBUSY;
+ goto error;
+ }
+ dev->got_irq = 1;
+#endif
+
+ /* set stopped bit */
+ dev->stopped = 1;
+
+ /* capabilities and endpoint number */
+ dev->lpm = (readl(&dev->cap_regs->hccparams) & HCC_LEN) ? 1 : 0;
+ dev->dciversion = readw(&dev->cap_regs->dciversion);
+ dev->devcap = (readl(&dev->cap_regs->dccparams) & DEVCAP) ? 1 : 0;
+ VDBG(dev, "dev->lpm: %d\n", dev->lpm);
+ VDBG(dev, "dev->dciversion: 0x%04x\n", dev->dciversion);
+ VDBG(dev, "dccparams: 0x%08x\n", readl(&dev->cap_regs->dccparams));
+ VDBG(dev, "dev->devcap: %d\n", dev->devcap);
+ if (!dev->devcap) {
+ ERROR(dev, "can't support device mode\n");
+ retval = -ENODEV;
+ goto error;
+ }
+
+ /* a pair of endpoints (out/in) for each address */
+ dev->ep_max = DEN(readl(&dev->cap_regs->dccparams)) * 2;
+ VDBG(dev, "dev->ep_max: %d\n", dev->ep_max);
+
+ /* allocate endpoints memory */
+ dev->ep = kzalloc(sizeof(struct langwell_ep) * dev->ep_max,
+ GFP_KERNEL);
+ if (!dev->ep) {
+ ERROR(dev, "allocate endpoints memory failed\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ /* allocate device dQH memory */
+ size = dev->ep_max * sizeof(struct langwell_dqh);
+ VDBG(dev, "orig size = %d\n", size);
+ if (size < DQH_ALIGNMENT)
+ size = DQH_ALIGNMENT;
+ else if ((size % DQH_ALIGNMENT) != 0) {
+ size += DQH_ALIGNMENT + 1;
+ size &= ~(DQH_ALIGNMENT - 1);
+ }
+ dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
+ &dev->ep_dqh_dma, GFP_KERNEL);
+ if (!dev->ep_dqh) {
+ ERROR(dev, "allocate dQH memory failed\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ dev->ep_dqh_size = size;
+ VDBG(dev, "ep_dqh_size = %d\n", dev->ep_dqh_size);
+
+ /* initialize ep0 status request structure */
+ dev->status_req = kzalloc(sizeof(struct langwell_request), GFP_KERNEL);
+ if (!dev->status_req) {
+ ERROR(dev, "allocate status_req memory failed\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ INIT_LIST_HEAD(&dev->status_req->queue);
+
+ /* allocate a small amount of memory to get valid address */
+ dev->status_req->req.buf = kmalloc(8, GFP_KERNEL);
+ dev->status_req->req.dma = virt_to_phys(dev->status_req->req.buf);
+
+ dev->resume_state = USB_STATE_NOTATTACHED;
+ dev->usb_state = USB_STATE_POWERED;
+ dev->ep0_dir = USB_DIR_OUT;
+ dev->remote_wakeup = 0; /* default to 0 on reset */
+
+#ifndef OTG_TRANSCEIVER
+ /* reset device controller */
+ langwell_udc_reset(dev);
+#endif
+
+ /* initialize gadget structure */
+ dev->gadget.ops = &langwell_ops; /* usb_gadget_ops */
+ dev->gadget.ep0 = &dev->ep[0].ep; /* gadget ep0 */
+ INIT_LIST_HEAD(&dev->gadget.ep_list); /* ep_list */
+ dev->gadget.speed = USB_SPEED_UNKNOWN; /* speed */
+ dev->gadget.is_dualspeed = 1; /* support dual speed */
+#ifdef OTG_TRANSCEIVER
+ dev->gadget.is_otg = 1; /* support otg mode */
+#endif
+
+ /* the "gadget" abstracts/virtualizes the controller */
+ dev_set_name(&dev->gadget.dev, "gadget");
+ dev->gadget.dev.parent = &pdev->dev;
+ dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
+ dev->gadget.dev.release = gadget_release;
+ dev->gadget.name = driver_name; /* gadget name */
+
+ /* controller endpoints reinit */
+ eps_reinit(dev);
+
+#ifndef OTG_TRANSCEIVER
+ /* reset ep0 dQH and endptctrl */
+ ep0_reset(dev);
+#endif
+
+ /* create dTD dma_pool resource */
+ dev->dtd_pool = dma_pool_create("langwell_dtd",
+ &dev->pdev->dev,
+ sizeof(struct langwell_dtd),
+ DTD_ALIGNMENT,
+ DMA_BOUNDARY);
+
+ if (!dev->dtd_pool) {
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ /* done */
+ INFO(dev, "%s\n", driver_desc);
+ INFO(dev, "irq %d, pci mem %p\n", pdev->irq, base);
+ INFO(dev, "Driver version: " DRIVER_VERSION "\n");
+ INFO(dev, "Support (max) %d endpoints\n", dev->ep_max);
+ INFO(dev, "Device interface version: 0x%04x\n", dev->dciversion);
+ INFO(dev, "Controller mode: %s\n", dev->devcap ? "Device" : "Host");
+ INFO(dev, "Support USB LPM: %s\n", dev->lpm ? "Yes" : "No");
+
+ VDBG(dev, "After langwell_udc_probe(), print all registers:\n");
+#ifdef VERBOSE
+ print_all_registers(dev);
+#endif
+
+ the_controller = dev;
+
+ retval = device_register(&dev->gadget.dev);
+ if (retval)
+ goto error;
+
+ retval = device_create_file(&pdev->dev, &dev_attr_langwell_udc);
+ if (retval)
+ goto error;
+
+ VDBG(dev, "<--- %s()\n", __func__);
+ return 0;
+
+error:
+ if (dev) {
+ DBG(dev, "<--- %s()\n", __func__);
+ langwell_udc_remove(pdev);
+ }
+
+ return retval;
+}
+
+
+/* device controller suspend */
+static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct langwell_udc *dev = the_controller;
+ u32 devlc;
+
+ DBG(dev, "---> %s()\n", __func__);
+
+ /* disable interrupt and set controller to stop state */
+ langwell_udc_stop(dev);
+
+ /* diable IRQ handler */
+ if (dev->got_irq)
+ free_irq(pdev->irq, dev);
+ dev->got_irq = 0;
+
+
+ /* save PCI state */
+ pci_save_state(pdev);
+
+ /* set device power state */
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ /* enter PHY low power suspend */
+ devlc = readl(&dev->op_regs->devlc);
+ VDBG(dev, "devlc = 0x%08x\n", devlc);
+ devlc |= LPM_PHCD;
+ writel(devlc, &dev->op_regs->devlc);
+
+ DBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* device controller resume */
+static int langwell_udc_resume(struct pci_dev *pdev)
+{
+ struct langwell_udc *dev = the_controller;
+ u32 devlc;
+
+ DBG(dev, "---> %s()\n", __func__);
+
+ /* exit PHY low power suspend */
+ devlc = readl(&dev->op_regs->devlc);
+ VDBG(dev, "devlc = 0x%08x\n", devlc);
+ devlc &= ~LPM_PHCD;
+ writel(devlc, &dev->op_regs->devlc);
+
+ /* set device D0 power state */
+ pci_set_power_state(pdev, PCI_D0);
+
+ /* restore PCI state */
+ pci_restore_state(pdev);
+
+ /* enable IRQ handler */
+ if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED, driver_name, dev)
+ != 0) {
+ ERROR(dev, "request interrupt %d failed\n", pdev->irq);
+ return -1;
+ }
+ dev->got_irq = 1;
+
+ /* reset and start controller to run state */
+ if (dev->stopped) {
+ /* reset device controller */
+ langwell_udc_reset(dev);
+
+ /* reset ep0 dQH and endptctrl */
+ ep0_reset(dev);
+
+ /* start device if gadget is loaded */
+ if (dev->driver)
+ langwell_udc_start(dev);
+ }
+
+ /* reset USB status */
+ dev->usb_state = USB_STATE_ATTACHED;
+ dev->ep0_state = WAIT_FOR_SETUP;
+ dev->ep0_dir = USB_DIR_OUT;
+
+ DBG(dev, "<--- %s()\n", __func__);
+ return 0;
+}
+
+
+/* pci driver shutdown */
+static void langwell_udc_shutdown(struct pci_dev *pdev)
+{
+ struct langwell_udc *dev = the_controller;
+ u32 usbmode;
+
+ DBG(dev, "---> %s()\n", __func__);
+
+ /* reset controller mode to IDLE */
+ usbmode = readl(&dev->op_regs->usbmode);
+ DBG(dev, "usbmode = 0x%08x\n", usbmode);
+ usbmode &= (~3 | MODE_IDLE);
+ writel(usbmode, &dev->op_regs->usbmode);
+
+ DBG(dev, "<--- %s()\n", __func__);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static const struct pci_device_id pci_ids[] = { {
+ .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class_mask = ~0,
+ .vendor = 0x8086,
+ .device = 0x0811,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+}, { /* end: all zeroes */ }
+};
+
+
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+
+static struct pci_driver langwell_pci_driver = {
+ .name = (char *) driver_name,
+ .id_table = pci_ids,
+
+ .probe = langwell_udc_probe,
+ .remove = langwell_udc_remove,
+
+ /* device controller suspend/resume */
+ .suspend = langwell_udc_suspend,
+ .resume = langwell_udc_resume,
+
+ .shutdown = langwell_udc_shutdown,
+};
+
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Xiaochen Shen <xiaochen.shen@intel.com>");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+
+static int __init init(void)
+{
+#ifdef OTG_TRANSCEIVER
+ return langwell_register_peripheral(&langwell_pci_driver);
+#else
+ return pci_register_driver(&langwell_pci_driver);
+#endif
+}
+module_init(init);
+
+
+static void __exit cleanup(void)
+{
+#ifdef OTG_TRANSCEIVER
+ return langwell_unregister_peripheral(&langwell_pci_driver);
+#else
+ pci_unregister_driver(&langwell_pci_driver);
+#endif
+}
+module_exit(cleanup);
+
diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h
new file mode 100644
index 00000000000..9719934e1c0
--- /dev/null
+++ b/drivers/usb/gadget/langwell_udc.h
@@ -0,0 +1,228 @@
+/*
+ * Intel Langwell USB Device Controller driver
+ * Copyright (C) 2008-2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/usb/langwell_udc.h>
+
+#if defined(CONFIG_USB_LANGWELL_OTG)
+#include <linux/usb/langwell_otg.h>
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+/* driver data structures and utilities */
+
+/*
+ * dTD: Device Endpoint Transfer Descriptor
+ * describe to the device controller the location and quantity of
+ * data to be send/received for given transfer
+ */
+struct langwell_dtd {
+ u32 dtd_next;
+/* bits 31:5, next transfer element pointer */
+#define DTD_NEXT(d) (((d)>>5)&0x7ffffff)
+#define DTD_NEXT_MASK (0x7ffffff << 5)
+/* terminate */
+#define DTD_TERM BIT(0)
+ /* bits 7:0, execution back states */
+ u32 dtd_status:8;
+#define DTD_STATUS(d) (((d)>>0)&0xff)
+#define DTD_STS_ACTIVE BIT(7) /* active */
+#define DTD_STS_HALTED BIT(6) /* halted */
+#define DTD_STS_DBE BIT(5) /* data buffer error */
+#define DTD_STS_TRE BIT(3) /* transaction error */
+ /* bits 9:8 */
+ u32 dtd_res0:2;
+ /* bits 11:10, multipier override */
+ u32 dtd_multo:2;
+#define DTD_MULTO (BIT(11) | BIT(10))
+ /* bits 14:12 */
+ u32 dtd_res1:3;
+ /* bit 15, interrupt on complete */
+ u32 dtd_ioc:1;
+#define DTD_IOC BIT(15)
+ /* bits 30:16, total bytes */
+ u32 dtd_total:15;
+#define DTD_TOTAL(d) (((d)>>16)&0x7fff)
+#define DTD_MAX_TRANSFER_LENGTH 0x4000
+ /* bit 31 */
+ u32 dtd_res2:1;
+ /* dTD buffer pointer page 0 to 4 */
+ u32 dtd_buf[5];
+#define DTD_OFFSET_MASK 0xfff
+/* bits 31:12, buffer pointer */
+#define DTD_BUFFER(d) (((d)>>12)&0x3ff)
+/* bits 11:0, current offset */
+#define DTD_C_OFFSET(d) (((d)>>0)&0xfff)
+/* bits 10:0, frame number */
+#define DTD_FRAME(d) (((d)>>0)&0x7ff)
+
+ /* driver-private parts */
+
+ /* dtd dma address */
+ dma_addr_t dtd_dma;
+ /* next dtd virtual address */
+ struct langwell_dtd *next_dtd_virt;
+};
+
+
+/*
+ * dQH: Device Endpoint Queue Head
+ * describe where all transfers are managed
+ * 48-byte data structure, aligned on 64-byte boundary
+ *
+ * These are associated with dTD structure
+ */
+struct langwell_dqh {
+ /* endpoint capabilities and characteristics */
+ u32 dqh_res0:15; /* bits 14:0 */
+ u32 dqh_ios:1; /* bit 15, interrupt on setup */
+#define DQH_IOS BIT(15)
+ u32 dqh_mpl:11; /* bits 26:16, maximum packet length */
+#define DQH_MPL (0x7ff << 16)
+ u32 dqh_res1:2; /* bits 28:27 */
+ u32 dqh_zlt:1; /* bit 29, zero length termination */
+#define DQH_ZLT BIT(29)
+ u32 dqh_mult:2; /* bits 31:30 */
+#define DQH_MULT (BIT(30) | BIT(31))
+
+ /* current dTD pointer */
+ u32 dqh_current; /* locate the transfer in progress */
+#define DQH_C_DTD(e) \
+ (((e)>>5)&0x7ffffff) /* bits 31:5, current dTD pointer */
+
+ /* transfer overlay, hardware parts of a struct langwell_dtd */
+ u32 dtd_next;
+ u32 dtd_status:8; /* bits 7:0, execution back states */
+ u32 dtd_res0:2; /* bits 9:8 */
+ u32 dtd_multo:2; /* bits 11:10, multipier override */
+ u32 dtd_res1:3; /* bits 14:12 */
+ u32 dtd_ioc:1; /* bit 15, interrupt on complete */
+ u32 dtd_total:15; /* bits 30:16, total bytes */
+ u32 dtd_res2:1; /* bit 31 */
+ u32 dtd_buf[5]; /* dTD buffer pointer page 0 to 4 */
+
+ u32 dqh_res2;
+ struct usb_ctrlrequest dqh_setup; /* setup packet buffer */
+} __attribute__ ((aligned(64)));
+
+
+/* endpoint data structure */
+struct langwell_ep {
+ struct usb_ep ep;
+ dma_addr_t dma;
+ struct langwell_udc *dev;
+ unsigned long irqs;
+ struct list_head queue;
+ struct langwell_dqh *dqh;
+ const struct usb_endpoint_descriptor *desc;
+ char name[14];
+ unsigned stopped:1,
+ ep_type:2,
+ ep_num:8;
+};
+
+
+/* request data structure */
+struct langwell_request {
+ struct usb_request req;
+ struct langwell_dtd *dtd, *head, *tail;
+ struct langwell_ep *ep;
+ dma_addr_t dtd_dma;
+ struct list_head queue;
+ unsigned dtd_count;
+ unsigned mapped:1;
+};
+
+
+/* ep0 transfer state */
+enum ep0_state {
+ WAIT_FOR_SETUP,
+ DATA_STATE_XMIT,
+ DATA_STATE_NEED_ZLP,
+ WAIT_FOR_OUT_STATUS,
+ DATA_STATE_RECV,
+};
+
+
+/* device suspend state */
+enum lpm_state {
+ LPM_L0, /* on */
+ LPM_L1, /* LPM L1 sleep */
+ LPM_L2, /* suspend */
+ LPM_L3, /* off */
+};
+
+
+/* device data structure */
+struct langwell_udc {
+ /* each pci device provides one gadget, several endpoints */
+ struct usb_gadget gadget;
+ spinlock_t lock; /* device lock */
+ struct langwell_ep *ep;
+ struct usb_gadget_driver *driver;
+ struct otg_transceiver *transceiver;
+ u8 dev_addr;
+ u32 usb_state;
+ u32 resume_state;
+ u32 bus_reset;
+ enum lpm_state lpm_state;
+ enum ep0_state ep0_state;
+ u32 ep0_dir;
+ u16 dciversion;
+ unsigned ep_max;
+ unsigned devcap:1,
+ enabled:1,
+ region:1,
+ got_irq:1,
+ powered:1,
+ remote_wakeup:1,
+ rate:1,
+ is_reset:1,
+ softconnected:1,
+ vbus_active:1,
+ suspended:1,
+ stopped:1,
+ lpm:1; /* LPM capability */
+
+ /* pci state used to access those endpoints */
+ struct pci_dev *pdev;
+
+ /* Langwell otg transceiver */
+ struct langwell_otg *lotg;
+
+ /* control registers */
+ struct langwell_cap_regs __iomem *cap_regs;
+ struct langwell_op_regs __iomem *op_regs;
+
+ struct usb_ctrlrequest local_setup_buff;
+ struct langwell_dqh *ep_dqh;
+ size_t ep_dqh_size;
+ dma_addr_t ep_dqh_dma;
+
+ /* ep0 status request */
+ struct langwell_request *status_req;
+
+ /* dma pool */
+ struct dma_pool *dtd_pool;
+
+ /* make sure release() is done */
+ struct completion *done;
+};
+
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 8cc676ecbb2..1937d8c7b43 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -38,7 +38,6 @@
#include <linux/usb.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
-#include <mach/pxa2xx-regs.h> /* FIXME: for PSSR */
#include <mach/udc.h>
#include "pxa27x_udc.h"
@@ -474,6 +473,23 @@ static inline void udc_clear_mask_UDCCR(struct pxa_udc *udc, int mask)
}
/**
+ * ep_write_UDCCSR - set bits in UDCCSR
+ * @udc: udc device
+ * @mask: bits to set in UDCCR
+ *
+ * Sets bits in UDCCSR (UDCCSR0 and UDCCSR*).
+ *
+ * A specific case is applied to ep0 : the ACM bit is always set to 1, for
+ * SET_INTERFACE and SET_CONFIGURATION.
+ */
+static inline void ep_write_UDCCSR(struct pxa_ep *ep, int mask)
+{
+ if (is_ep0(ep))
+ mask |= UDCCSR0_ACM;
+ udc_ep_writel(ep, UDCCSR, mask);
+}
+
+/**
* ep_count_bytes_remain - get how many bytes in udc endpoint
* @ep: udc endpoint
*
@@ -861,7 +877,7 @@ static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req)
*buf++ = udc_ep_readl(ep, UDCDR);
req->req.actual += count;
- udc_ep_writel(ep, UDCCSR, UDCCSR_PC);
+ ep_write_UDCCSR(ep, UDCCSR_PC);
return count;
}
@@ -969,12 +985,12 @@ static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
if (udccsr & UDCCSR_PC) {
ep_vdbg(ep, "Clearing Transmit Complete, udccsr=%x\n",
udccsr);
- udc_ep_writel(ep, UDCCSR, UDCCSR_PC);
+ ep_write_UDCCSR(ep, UDCCSR_PC);
}
if (udccsr & UDCCSR_TRN) {
ep_vdbg(ep, "Clearing Underrun on, udccsr=%x\n",
udccsr);
- udc_ep_writel(ep, UDCCSR, UDCCSR_TRN);
+ ep_write_UDCCSR(ep, UDCCSR_TRN);
}
count = write_packet(ep, req, max);
@@ -996,7 +1012,7 @@ static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
}
if (is_short)
- udc_ep_writel(ep, UDCCSR, UDCCSR_SP);
+ ep_write_UDCCSR(ep, UDCCSR_SP);
/* requests complete when all IN data is in the FIFO */
if (is_last) {
@@ -1029,7 +1045,7 @@ static int read_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
while (epout_has_pkt(ep)) {
count = read_packet(ep, req);
- udc_ep_writel(ep, UDCCSR, UDCCSR0_OPC);
+ ep_write_UDCCSR(ep, UDCCSR0_OPC);
inc_ep_stats_bytes(ep, count, !USB_DIR_IN);
is_short = (count < ep->fifo_size);
@@ -1074,7 +1090,7 @@ static int write_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
/* Sends either a short packet or a 0 length packet */
if (unlikely(is_short))
- udc_ep_writel(ep, UDCCSR, UDCCSR0_IPR);
+ ep_write_UDCCSR(ep, UDCCSR0_IPR);
ep_dbg(ep, "in %d bytes%s%s, %d left, req=%p, udccsr0=0x%03x\n",
count, is_short ? "/S" : "", is_last ? "/L" : "",
@@ -1277,7 +1293,7 @@ static int pxa_ep_set_halt(struct usb_ep *_ep, int value)
/* FST, FEF bits are the same for control and non control endpoints */
rc = 0;
- udc_ep_writel(ep, UDCCSR, UDCCSR_FST | UDCCSR_FEF);
+ ep_write_UDCCSR(ep, UDCCSR_FST | UDCCSR_FEF);
if (is_ep0(ep))
set_ep0state(ep->dev, STALL);
@@ -1343,7 +1359,7 @@ static void pxa_ep_fifo_flush(struct usb_ep *_ep)
udc_ep_readl(ep, UDCDR);
} else {
/* most IN status is the same, but ISO can't stall */
- udc_ep_writel(ep, UDCCSR,
+ ep_write_UDCCSR(ep,
UDCCSR_PC | UDCCSR_FEF | UDCCSR_TRN
| (EPXFERTYPE_is_ISO(ep) ? 0 : UDCCSR_SST));
}
@@ -1728,6 +1744,7 @@ static void udc_enable(struct pxa_udc *udc)
memset(&udc->stats, 0, sizeof(udc->stats));
udc_set_mask_UDCCR(udc, UDCCR_UDE);
+ ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_ACM);
udelay(2);
if (udc_readl(udc, UDCCR) & UDCCR_EMCE)
dev_err(udc->dev, "Configuration errors, udc disabled\n");
@@ -1893,6 +1910,15 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc,
nuke(ep, -EPROTO);
+ /*
+ * In the PXA320 manual, in the section about Back-to-Back setup
+ * packets, it describes this situation. The solution is to set OPC to
+ * get rid of the status packet, and then continue with the setup
+ * packet. Generalize to pxa27x CPUs.
+ */
+ if (epout_has_pkt(ep) && (ep_count_bytes_remain(ep) == 0))
+ ep_write_UDCCSR(ep, UDCCSR0_OPC);
+
/* read SETUP packet */
for (i = 0; i < 2; i++) {
if (unlikely(ep_is_empty(ep)))
@@ -1919,7 +1945,7 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc,
set_ep0state(udc, OUT_DATA_STAGE);
/* Tell UDC to enter Data Stage */
- udc_ep_writel(ep, UDCCSR, UDCCSR0_SA | UDCCSR0_OPC);
+ ep_write_UDCCSR(ep, UDCCSR0_SA | UDCCSR0_OPC);
i = udc->driver->setup(&udc->gadget, &u.r);
if (i < 0)
@@ -1929,7 +1955,7 @@ out:
stall:
ep_dbg(ep, "protocol STALL, udccsr0=%03x err %d\n",
udc_ep_readl(ep, UDCCSR), i);
- udc_ep_writel(ep, UDCCSR, UDCCSR0_FST | UDCCSR0_FTF);
+ ep_write_UDCCSR(ep, UDCCSR0_FST | UDCCSR0_FTF);
set_ep0state(udc, STALL);
goto out;
}
@@ -1966,6 +1992,8 @@ stall:
* cleared by software.
* - clearing UDCCSR0_OPC always flushes ep0. If in setup stage, never do it
* before reading ep0.
+ * This is true only for PXA27x. This is not true anymore for PXA3xx family
+ * (check Back-to-Back setup packet in developers guide).
* - irq can be called on a "packet complete" event (opc_irq=1), while
* UDCCSR0_OPC is not yet raised (delta can be as big as 100ms
* from experimentation).
@@ -1998,7 +2026,7 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
if (udccsr0 & UDCCSR0_SST) {
ep_dbg(ep, "clearing stall status\n");
nuke(ep, -EPIPE);
- udc_ep_writel(ep, UDCCSR, UDCCSR0_SST);
+ ep_write_UDCCSR(ep, UDCCSR0_SST);
ep0_idle(udc);
}
@@ -2023,7 +2051,7 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
break;
case IN_DATA_STAGE: /* GET_DESCRIPTOR */
if (epout_has_pkt(ep))
- udc_ep_writel(ep, UDCCSR, UDCCSR0_OPC);
+ ep_write_UDCCSR(ep, UDCCSR0_OPC);
if (req && !ep_is_full(ep))
completed = write_ep0_fifo(ep, req);
if (completed)
@@ -2036,7 +2064,7 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
ep0_end_out_req(ep, req);
break;
case STALL:
- udc_ep_writel(ep, UDCCSR, UDCCSR0_FST);
+ ep_write_UDCCSR(ep, UDCCSR0_FST);
break;
case IN_STATUS_STAGE:
/*
@@ -2131,6 +2159,7 @@ static void pxa27x_change_configuration(struct pxa_udc *udc, int config)
set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF);
udc->driver->setup(&udc->gadget, &req);
+ ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_AREN);
}
/**
@@ -2159,6 +2188,7 @@ static void pxa27x_change_interface(struct pxa_udc *udc, int iface, int alt)
set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF);
udc->driver->setup(&udc->gadget, &req);
+ ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_AREN);
}
/*
@@ -2280,7 +2310,7 @@ static void irq_udc_reset(struct pxa_udc *udc)
memset(&udc->stats, 0, sizeof udc->stats);
nuke(ep, -EPROTO);
- udc_ep_writel(ep, UDCCSR, UDCCSR0_FTF | UDCCSR0_OPC);
+ ep_write_UDCCSR(ep, UDCCSR0_FTF | UDCCSR0_OPC);
ep0_idle(udc);
}
@@ -2479,6 +2509,12 @@ static void pxa_udc_shutdown(struct platform_device *_dev)
udc_disable(udc);
}
+#ifdef CONFIG_CPU_PXA27x
+extern void pxa27x_clear_otgph(void);
+#else
+#define pxa27x_clear_otgph() do {} while (0)
+#endif
+
#ifdef CONFIG_PM
/**
* pxa_udc_suspend - Suspend udc device
@@ -2546,8 +2582,7 @@ static int pxa_udc_resume(struct platform_device *_dev)
* Software must configure the USB OTG pad, UDC, and UHC
* to the state they were in before entering sleep mode.
*/
- if (cpu_is_pxa27x())
- PSSR |= PSSR_OTGPH;
+ pxa27x_clear_otgph();
return 0;
}
@@ -2571,7 +2606,7 @@ static struct platform_driver udc_driver = {
static int __init udc_init(void)
{
- if (!cpu_is_pxa27x())
+ if (!cpu_is_pxa27x() && !cpu_is_pxa3xx())
return -ENODEV;
printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index db58125331d..e25225e2658 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -130,6 +130,8 @@
#define UP2OCR_HXOE (1 << 17) /* Transceiver Output Enable */
#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */
+#define UDCCSR0_ACM (1 << 9) /* Ack Control Mode */
+#define UDCCSR0_AREN (1 << 8) /* Ack Response Enable */
#define UDCCSR0_SA (1 << 7) /* Setup Active */
#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
#define UDCCSR0_FST (1 << 5) /* Force Stall */
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
new file mode 100644
index 00000000000..50c71aae2cc
--- /dev/null
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -0,0 +1,3269 @@
+/* linux/drivers/usb/gadget/s3c-hsotg.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C USB2.0 High-speed / OtG driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-usb-hsotg-phy.h>
+#include <plat/regs-usb-hsotg.h>
+#include <plat/regs-sys.h>
+#include <plat/udc-hs.h>
+
+#define DMA_ADDR_INVALID (~((dma_addr_t)0))
+
+/* EP0_MPS_LIMIT
+ *
+ * Unfortunately there seems to be a limit of the amount of data that can
+ * be transfered by IN transactions on EP0. This is either 127 bytes or 3
+ * packets (which practially means 1 packet and 63 bytes of data) when the
+ * MPS is set to 64.
+ *
+ * This means if we are wanting to move >127 bytes of data, we need to
+ * split the transactions up, but just doing one packet at a time does
+ * not work (this may be an implicit DATA0 PID on first packet of the
+ * transaction) and doing 2 packets is outside the controller's limits.
+ *
+ * If we try to lower the MPS size for EP0, then no transfers work properly
+ * for EP0, and the system will fail basic enumeration. As no cause for this
+ * has currently been found, we cannot support any large IN transfers for
+ * EP0.
+ */
+#define EP0_MPS_LIMIT 64
+
+struct s3c_hsotg;
+struct s3c_hsotg_req;
+
+/**
+ * struct s3c_hsotg_ep - driver endpoint definition.
+ * @ep: The gadget layer representation of the endpoint.
+ * @name: The driver generated name for the endpoint.
+ * @queue: Queue of requests for this endpoint.
+ * @parent: Reference back to the parent device structure.
+ * @req: The current request that the endpoint is processing. This is
+ * used to indicate an request has been loaded onto the endpoint
+ * and has yet to be completed (maybe due to data move, or simply
+ * awaiting an ack from the core all the data has been completed).
+ * @debugfs: File entry for debugfs file for this endpoint.
+ * @lock: State lock to protect contents of endpoint.
+ * @dir_in: Set to true if this endpoint is of the IN direction, which
+ * means that it is sending data to the Host.
+ * @index: The index for the endpoint registers.
+ * @name: The name array passed to the USB core.
+ * @halted: Set if the endpoint has been halted.
+ * @periodic: Set if this is a periodic ep, such as Interrupt
+ * @sent_zlp: Set if we've sent a zero-length packet.
+ * @total_data: The total number of data bytes done.
+ * @fifo_size: The size of the FIFO (for periodic IN endpoints)
+ * @fifo_load: The amount of data loaded into the FIFO (periodic IN)
+ * @last_load: The offset of data for the last start of request.
+ * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN
+ *
+ * This is the driver's state for each registered enpoint, allowing it
+ * to keep track of transactions that need doing. Each endpoint has a
+ * lock to protect the state, to try and avoid using an overall lock
+ * for the host controller as much as possible.
+ *
+ * For periodic IN endpoints, we have fifo_size and fifo_load to try
+ * and keep track of the amount of data in the periodic FIFO for each
+ * of these as we don't have a status register that tells us how much
+ * is in each of them.
+ */
+struct s3c_hsotg_ep {
+ struct usb_ep ep;
+ struct list_head queue;
+ struct s3c_hsotg *parent;
+ struct s3c_hsotg_req *req;
+ struct dentry *debugfs;
+
+ spinlock_t lock;
+
+ unsigned long total_data;
+ unsigned int size_loaded;
+ unsigned int last_load;
+ unsigned int fifo_load;
+ unsigned short fifo_size;
+
+ unsigned char dir_in;
+ unsigned char index;
+
+ unsigned int halted:1;
+ unsigned int periodic:1;
+ unsigned int sent_zlp:1;
+
+ char name[10];
+};
+
+#define S3C_HSOTG_EPS (8+1) /* limit to 9 for the moment */
+
+/**
+ * struct s3c_hsotg - driver state.
+ * @dev: The parent device supplied to the probe function
+ * @driver: USB gadget driver
+ * @plat: The platform specific configuration data.
+ * @regs: The memory area mapped for accessing registers.
+ * @regs_res: The resource that was allocated when claiming register space.
+ * @irq: The IRQ number we are using
+ * @debug_root: root directrory for debugfs.
+ * @debug_file: main status file for debugfs.
+ * @debug_fifo: FIFO status file for debugfs.
+ * @ep0_reply: Request used for ep0 reply.
+ * @ep0_buff: Buffer for EP0 reply data, if needed.
+ * @ctrl_buff: Buffer for EP0 control requests.
+ * @ctrl_req: Request for EP0 control packets.
+ * @eps: The endpoints being supplied to the gadget framework
+ */
+struct s3c_hsotg {
+ struct device *dev;
+ struct usb_gadget_driver *driver;
+ struct s3c_hsotg_plat *plat;
+
+ void __iomem *regs;
+ struct resource *regs_res;
+ int irq;
+
+ struct dentry *debug_root;
+ struct dentry *debug_file;
+ struct dentry *debug_fifo;
+
+ struct usb_request *ep0_reply;
+ struct usb_request *ctrl_req;
+ u8 ep0_buff[8];
+ u8 ctrl_buff[8];
+
+ struct usb_gadget gadget;
+ struct s3c_hsotg_ep eps[];
+};
+
+/**
+ * struct s3c_hsotg_req - data transfer request
+ * @req: The USB gadget request
+ * @queue: The list of requests for the endpoint this is queued for.
+ * @in_progress: Has already had size/packets written to core
+ * @mapped: DMA buffer for this request has been mapped via dma_map_single().
+ */
+struct s3c_hsotg_req {
+ struct usb_request req;
+ struct list_head queue;
+ unsigned char in_progress;
+ unsigned char mapped;
+};
+
+/* conversion functions */
+static inline struct s3c_hsotg_req *our_req(struct usb_request *req)
+{
+ return container_of(req, struct s3c_hsotg_req, req);
+}
+
+static inline struct s3c_hsotg_ep *our_ep(struct usb_ep *ep)
+{
+ return container_of(ep, struct s3c_hsotg_ep, ep);
+}
+
+static inline struct s3c_hsotg *to_hsotg(struct usb_gadget *gadget)
+{
+ return container_of(gadget, struct s3c_hsotg, gadget);
+}
+
+static inline void __orr32(void __iomem *ptr, u32 val)
+{
+ writel(readl(ptr) | val, ptr);
+}
+
+static inline void __bic32(void __iomem *ptr, u32 val)
+{
+ writel(readl(ptr) & ~val, ptr);
+}
+
+/* forward decleration of functions */
+static void s3c_hsotg_dump(struct s3c_hsotg *hsotg);
+
+/**
+ * using_dma - return the DMA status of the driver.
+ * @hsotg: The driver state.
+ *
+ * Return true if we're using DMA.
+ *
+ * Currently, we have the DMA support code worked into everywhere
+ * that needs it, but the AMBA DMA implementation in the hardware can
+ * only DMA from 32bit aligned addresses. This means that gadgets such
+ * as the CDC Ethernet cannot work as they often pass packets which are
+ * not 32bit aligned.
+ *
+ * Unfortunately the choice to use DMA or not is global to the controller
+ * and seems to be only settable when the controller is being put through
+ * a core reset. This means we either need to fix the gadgets to take
+ * account of DMA alignment, or add bounce buffers (yuerk).
+ *
+ * Until this issue is sorted out, we always return 'false'.
+ */
+static inline bool using_dma(struct s3c_hsotg *hsotg)
+{
+ return false; /* support is not complete */
+}
+
+/**
+ * s3c_hsotg_en_gsint - enable one or more of the general interrupt
+ * @hsotg: The device state
+ * @ints: A bitmask of the interrupts to enable
+ */
+static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints)
+{
+ u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK);
+ u32 new_gsintmsk;
+
+ new_gsintmsk = gsintmsk | ints;
+
+ if (new_gsintmsk != gsintmsk) {
+ dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk);
+ writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK);
+ }
+}
+
+/**
+ * s3c_hsotg_disable_gsint - disable one or more of the general interrupt
+ * @hsotg: The device state
+ * @ints: A bitmask of the interrupts to enable
+ */
+static void s3c_hsotg_disable_gsint(struct s3c_hsotg *hsotg, u32 ints)
+{
+ u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK);
+ u32 new_gsintmsk;
+
+ new_gsintmsk = gsintmsk & ~ints;
+
+ if (new_gsintmsk != gsintmsk)
+ writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK);
+}
+
+/**
+ * s3c_hsotg_ctrl_epint - enable/disable an endpoint irq
+ * @hsotg: The device state
+ * @ep: The endpoint index
+ * @dir_in: True if direction is in.
+ * @en: The enable value, true to enable
+ *
+ * Set or clear the mask for an individual endpoint's interrupt
+ * request.
+ */
+static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg,
+ unsigned int ep, unsigned int dir_in,
+ unsigned int en)
+{
+ unsigned long flags;
+ u32 bit = 1 << ep;
+ u32 daint;
+
+ if (!dir_in)
+ bit <<= 16;
+
+ local_irq_save(flags);
+ daint = readl(hsotg->regs + S3C_DAINTMSK);
+ if (en)
+ daint |= bit;
+ else
+ daint &= ~bit;
+ writel(daint, hsotg->regs + S3C_DAINTMSK);
+ local_irq_restore(flags);
+}
+
+/**
+ * s3c_hsotg_init_fifo - initialise non-periodic FIFOs
+ * @hsotg: The device instance.
+ */
+static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
+{
+ /* the ryu 2.6.24 release ahs
+ writel(0x1C0, hsotg->regs + S3C_GRXFSIZ);
+ writel(S3C_GNPTXFSIZ_NPTxFStAddr(0x200) |
+ S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
+ hsotg->regs + S3C_GNPTXFSIZ);
+ */
+
+ /* set FIFO sizes to 2048/0x1C0 */
+
+ writel(2048, hsotg->regs + S3C_GRXFSIZ);
+ writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) |
+ S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
+ hsotg->regs + S3C_GNPTXFSIZ);
+}
+
+/**
+ * @ep: USB endpoint to allocate request for.
+ * @flags: Allocation flags
+ *
+ * Allocate a new USB request structure appropriate for the specified endpoint
+ */
+struct usb_request *s3c_hsotg_ep_alloc_request(struct usb_ep *ep, gfp_t flags)
+{
+ struct s3c_hsotg_req *req;
+
+ req = kzalloc(sizeof(struct s3c_hsotg_req), flags);
+ if (!req)
+ return NULL;
+
+ INIT_LIST_HEAD(&req->queue);
+
+ req->req.dma = DMA_ADDR_INVALID;
+ return &req->req;
+}
+
+/**
+ * is_ep_periodic - return true if the endpoint is in periodic mode.
+ * @hs_ep: The endpoint to query.
+ *
+ * Returns true if the endpoint is in periodic mode, meaning it is being
+ * used for an Interrupt or ISO transfer.
+ */
+static inline int is_ep_periodic(struct s3c_hsotg_ep *hs_ep)
+{
+ return hs_ep->periodic;
+}
+
+/**
+ * s3c_hsotg_unmap_dma - unmap the DMA memory being used for the request
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint for the request
+ * @hs_req: The request being processed.
+ *
+ * This is the reverse of s3c_hsotg_map_dma(), called for the completion
+ * of a request to ensure the buffer is ready for access by the caller.
+*/
+static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep,
+ struct s3c_hsotg_req *hs_req)
+{
+ struct usb_request *req = &hs_req->req;
+ enum dma_data_direction dir;
+
+ dir = hs_ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
+
+ /* ignore this if we're not moving any data */
+ if (hs_req->req.length == 0)
+ return;
+
+ if (hs_req->mapped) {
+ /* we mapped this, so unmap and remove the dma */
+
+ dma_unmap_single(hsotg->dev, req->dma, req->length, dir);
+
+ req->dma = DMA_ADDR_INVALID;
+ hs_req->mapped = 0;
+ } else {
+ dma_sync_single(hsotg->dev, req->dma, req->length, dir);
+ }
+}
+
+/**
+ * s3c_hsotg_write_fifo - write packet Data to the TxFIFO
+ * @hsotg: The controller state.
+ * @hs_ep: The endpoint we're going to write for.
+ * @hs_req: The request to write data for.
+ *
+ * This is called when the TxFIFO has some space in it to hold a new
+ * transmission and we have something to give it. The actual setup of
+ * the data size is done elsewhere, so all we have to do is to actually
+ * write the data.
+ *
+ * The return value is zero if there is more space (or nothing was done)
+ * otherwise -ENOSPC is returned if the FIFO space was used up.
+ *
+ * This routine is only needed for PIO
+*/
+static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep,
+ struct s3c_hsotg_req *hs_req)
+{
+ bool periodic = is_ep_periodic(hs_ep);
+ u32 gnptxsts = readl(hsotg->regs + S3C_GNPTXSTS);
+ int buf_pos = hs_req->req.actual;
+ int to_write = hs_ep->size_loaded;
+ void *data;
+ int can_write;
+ int pkt_round;
+
+ to_write -= (buf_pos - hs_ep->last_load);
+
+ /* if there's nothing to write, get out early */
+ if (to_write == 0)
+ return 0;
+
+ if (periodic) {
+ u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index));
+ int size_left;
+ int size_done;
+
+ /* work out how much data was loaded so we can calculate
+ * how much data is left in the fifo. */
+
+ size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
+
+ dev_dbg(hsotg->dev, "%s: left=%d, load=%d, fifo=%d, size %d\n",
+ __func__, size_left,
+ hs_ep->size_loaded, hs_ep->fifo_load, hs_ep->fifo_size);
+
+ /* how much of the data has moved */
+ size_done = hs_ep->size_loaded - size_left;
+
+ /* how much data is left in the fifo */
+ can_write = hs_ep->fifo_load - size_done;
+ dev_dbg(hsotg->dev, "%s: => can_write1=%d\n",
+ __func__, can_write);
+
+ can_write = hs_ep->fifo_size - can_write;
+ dev_dbg(hsotg->dev, "%s: => can_write2=%d\n",
+ __func__, can_write);
+
+ if (can_write <= 0) {
+ s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
+ return -ENOSPC;
+ }
+ } else {
+ if (S3C_GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) {
+ dev_dbg(hsotg->dev,
+ "%s: no queue slots available (0x%08x)\n",
+ __func__, gnptxsts);
+
+ s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_NPTxFEmp);
+ return -ENOSPC;
+ }
+
+ can_write = S3C_GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts);
+ }
+
+ dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n",
+ __func__, gnptxsts, can_write, to_write, hs_ep->ep.maxpacket);
+
+ /* limit to 512 bytes of data, it seems at least on the non-periodic
+ * FIFO, requests of >512 cause the endpoint to get stuck with a
+ * fragment of the end of the transfer in it.
+ */
+ if (can_write > 512)
+ can_write = 512;
+
+ /* see if we can write data */
+
+ if (to_write > can_write) {
+ to_write = can_write;
+ pkt_round = to_write % hs_ep->ep.maxpacket;
+
+ /* Not sure, but we probably shouldn't be writing partial
+ * packets into the FIFO, so round the write down to an
+ * exact number of packets.
+ *
+ * Note, we do not currently check to see if we can ever
+ * write a full packet or not to the FIFO.
+ */
+
+ if (pkt_round)
+ to_write -= pkt_round;
+
+ /* enable correct FIFO interrupt to alert us when there
+ * is more room left. */
+
+ s3c_hsotg_en_gsint(hsotg,
+ periodic ? S3C_GINTSTS_PTxFEmp :
+ S3C_GINTSTS_NPTxFEmp);
+ }
+
+ dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n",
+ to_write, hs_req->req.length, can_write, buf_pos);
+
+ if (to_write <= 0)
+ return -ENOSPC;
+
+ hs_req->req.actual = buf_pos + to_write;
+ hs_ep->total_data += to_write;
+
+ if (periodic)
+ hs_ep->fifo_load += to_write;
+
+ to_write = DIV_ROUND_UP(to_write, 4);
+ data = hs_req->req.buf + buf_pos;
+
+ writesl(hsotg->regs + S3C_EPFIFO(hs_ep->index), data, to_write);
+
+ return (to_write >= can_write) ? -ENOSPC : 0;
+}
+
+/**
+ * get_ep_limit - get the maximum data legnth for this endpoint
+ * @hs_ep: The endpoint
+ *
+ * Return the maximum data that can be queued in one go on a given endpoint
+ * so that transfers that are too long can be split.
+ */
+static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep)
+{
+ int index = hs_ep->index;
+ unsigned maxsize;
+ unsigned maxpkt;
+
+ if (index != 0) {
+ maxsize = S3C_DxEPTSIZ_XferSize_LIMIT + 1;
+ maxpkt = S3C_DxEPTSIZ_PktCnt_LIMIT + 1;
+ } else {
+ if (hs_ep->dir_in) {
+ /* maxsize = S3C_DIEPTSIZ0_XferSize_LIMIT + 1; */
+ maxsize = 64+64+1;
+ maxpkt = S3C_DIEPTSIZ0_PktCnt_LIMIT + 1;
+ } else {
+ maxsize = 0x3f;
+ maxpkt = 2;
+ }
+ }
+
+ /* we made the constant loading easier above by using +1 */
+ maxpkt--;
+ maxsize--;
+
+ /* constrain by packet count if maxpkts*pktsize is greater
+ * than the length register size. */
+
+ if ((maxpkt * hs_ep->ep.maxpacket) < maxsize)
+ maxsize = maxpkt * hs_ep->ep.maxpacket;
+
+ return maxsize;
+}
+
+/**
+ * s3c_hsotg_start_req - start a USB request from an endpoint's queue
+ * @hsotg: The controller state.
+ * @hs_ep: The endpoint to process a request for
+ * @hs_req: The request to start.
+ * @continuing: True if we are doing more for the current request.
+ *
+ * Start the given request running by setting the endpoint registers
+ * appropriately, and writing any data to the FIFOs.
+ */
+static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep,
+ struct s3c_hsotg_req *hs_req,
+ bool continuing)
+{
+ struct usb_request *ureq = &hs_req->req;
+ int index = hs_ep->index;
+ int dir_in = hs_ep->dir_in;
+ u32 epctrl_reg;
+ u32 epsize_reg;
+ u32 epsize;
+ u32 ctrl;
+ unsigned length;
+ unsigned packets;
+ unsigned maxreq;
+
+ if (index != 0) {
+ if (hs_ep->req && !continuing) {
+ dev_err(hsotg->dev, "%s: active request\n", __func__);
+ WARN_ON(1);
+ return;
+ } else if (hs_ep->req != hs_req && continuing) {
+ dev_err(hsotg->dev,
+ "%s: continue different req\n", __func__);
+ WARN_ON(1);
+ return;
+ }
+ }
+
+ epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
+ epsize_reg = dir_in ? S3C_DIEPTSIZ(index) : S3C_DOEPTSIZ(index);
+
+ dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n",
+ __func__, readl(hsotg->regs + epctrl_reg), index,
+ hs_ep->dir_in ? "in" : "out");
+
+ length = ureq->length - ureq->actual;
+
+ if (0)
+ dev_dbg(hsotg->dev,
+ "REQ buf %p len %d dma 0x%08x noi=%d zp=%d snok=%d\n",
+ ureq->buf, length, ureq->dma,
+ ureq->no_interrupt, ureq->zero, ureq->short_not_ok);
+
+ maxreq = get_ep_limit(hs_ep);
+ if (length > maxreq) {
+ int round = maxreq % hs_ep->ep.maxpacket;
+
+ dev_dbg(hsotg->dev, "%s: length %d, max-req %d, r %d\n",
+ __func__, length, maxreq, round);
+
+ /* round down to multiple of packets */
+ if (round)
+ maxreq -= round;
+
+ length = maxreq;
+ }
+
+ if (length)
+ packets = DIV_ROUND_UP(length, hs_ep->ep.maxpacket);
+ else
+ packets = 1; /* send one packet if length is zero. */
+
+ if (dir_in && index != 0)
+ epsize = S3C_DxEPTSIZ_MC(1);
+ else
+ epsize = 0;
+
+ if (index != 0 && ureq->zero) {
+ /* test for the packets being exactly right for the
+ * transfer */
+
+ if (length == (packets * hs_ep->ep.maxpacket))
+ packets++;
+ }
+
+ epsize |= S3C_DxEPTSIZ_PktCnt(packets);
+ epsize |= S3C_DxEPTSIZ_XferSize(length);
+
+ dev_dbg(hsotg->dev, "%s: %d@%d/%d, 0x%08x => 0x%08x\n",
+ __func__, packets, length, ureq->length, epsize, epsize_reg);
+
+ /* store the request as the current one we're doing */
+ hs_ep->req = hs_req;
+
+ /* write size / packets */
+ writel(epsize, hsotg->regs + epsize_reg);
+
+ ctrl = readl(hsotg->regs + epctrl_reg);
+
+ if (ctrl & S3C_DxEPCTL_Stall) {
+ dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index);
+
+ /* not sure what we can do here, if it is EP0 then we should
+ * get this cleared once the endpoint has transmitted the
+ * STALL packet, otherwise it needs to be cleared by the
+ * host.
+ */
+ }
+
+ if (using_dma(hsotg)) {
+ unsigned int dma_reg;
+
+ /* write DMA address to control register, buffer already
+ * synced by s3c_hsotg_ep_queue(). */
+
+ dma_reg = dir_in ? S3C_DIEPDMA(index) : S3C_DOEPDMA(index);
+ writel(ureq->dma, hsotg->regs + dma_reg);
+
+ dev_dbg(hsotg->dev, "%s: 0x%08x => 0x%08x\n",
+ __func__, ureq->dma, dma_reg);
+ }
+
+ ctrl |= S3C_DxEPCTL_EPEna; /* ensure ep enabled */
+ ctrl |= S3C_DxEPCTL_USBActEp;
+ ctrl |= S3C_DxEPCTL_CNAK; /* clear NAK set by core */
+
+ dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
+ writel(ctrl, hsotg->regs + epctrl_reg);
+
+ /* set these, it seems that DMA support increments past the end
+ * of the packet buffer so we need to calculate the length from
+ * this information. */
+ hs_ep->size_loaded = length;
+ hs_ep->last_load = ureq->actual;
+
+ if (dir_in && !using_dma(hsotg)) {
+ /* set these anyway, we may need them for non-periodic in */
+ hs_ep->fifo_load = 0;
+
+ s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req);
+ }
+
+ /* clear the INTknTXFEmpMsk when we start request, more as a aide
+ * to debugging to see what is going on. */
+ if (dir_in)
+ writel(S3C_DIEPMSK_INTknTXFEmpMsk,
+ hsotg->regs + S3C_DIEPINT(index));
+
+ /* Note, trying to clear the NAK here causes problems with transmit
+ * on the S3C6400 ending up with the TXFIFO becomming full. */
+
+ /* check ep is enabled */
+ if (!(readl(hsotg->regs + epctrl_reg) & S3C_DxEPCTL_EPEna))
+ dev_warn(hsotg->dev,
+ "ep%d: failed to become enabled (DxEPCTL=0x%08x)?\n",
+ index, readl(hsotg->regs + epctrl_reg));
+
+ dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n",
+ __func__, readl(hsotg->regs + epctrl_reg));
+}
+
+/**
+ * s3c_hsotg_map_dma - map the DMA memory being used for the request
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint the request is on.
+ * @req: The request being processed.
+ *
+ * We've been asked to queue a request, so ensure that the memory buffer
+ * is correctly setup for DMA. If we've been passed an extant DMA address
+ * then ensure the buffer has been synced to memory. If our buffer has no
+ * DMA memory, then we map the memory and mark our request to allow us to
+ * cleanup on completion.
+*/
+static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep,
+ struct usb_request *req)
+{
+ enum dma_data_direction dir;
+ struct s3c_hsotg_req *hs_req = our_req(req);
+
+ dir = hs_ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
+
+ /* if the length is zero, ignore the DMA data */
+ if (hs_req->req.length == 0)
+ return 0;
+
+ if (req->dma == DMA_ADDR_INVALID) {
+ dma_addr_t dma;
+
+ dma = dma_map_single(hsotg->dev, req->buf, req->length, dir);
+
+ if (unlikely(dma_mapping_error(hsotg->dev, dma)))
+ goto dma_error;
+
+ if (dma & 3) {
+ dev_err(hsotg->dev, "%s: unaligned dma buffer\n",
+ __func__);
+
+ dma_unmap_single(hsotg->dev, dma, req->length, dir);
+ return -EINVAL;
+ }
+
+ hs_req->mapped = 1;
+ req->dma = dma;
+ } else {
+ dma_sync_single(hsotg->dev, req->dma, req->length, dir);
+ hs_req->mapped = 0;
+ }
+
+ return 0;
+
+dma_error:
+ dev_err(hsotg->dev, "%s: failed to map buffer %p, %d bytes\n",
+ __func__, req->buf, req->length);
+
+ return -EIO;
+}
+
+static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
+ gfp_t gfp_flags)
+{
+ struct s3c_hsotg_req *hs_req = our_req(req);
+ struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+ struct s3c_hsotg *hs = hs_ep->parent;
+ unsigned long irqflags;
+ bool first;
+
+ dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n",
+ ep->name, req, req->length, req->buf, req->no_interrupt,
+ req->zero, req->short_not_ok);
+
+ /* initialise status of the request */
+ INIT_LIST_HEAD(&hs_req->queue);
+ req->actual = 0;
+ req->status = -EINPROGRESS;
+
+ /* if we're using DMA, sync the buffers as necessary */
+ if (using_dma(hs)) {
+ int ret = s3c_hsotg_map_dma(hs, hs_ep, req);
+ if (ret)
+ return ret;
+ }
+
+ spin_lock_irqsave(&hs_ep->lock, irqflags);
+
+ first = list_empty(&hs_ep->queue);
+ list_add_tail(&hs_req->queue, &hs_ep->queue);
+
+ if (first)
+ s3c_hsotg_start_req(hs, hs_ep, hs_req, false);
+
+ spin_unlock_irqrestore(&hs_ep->lock, irqflags);
+
+ return 0;
+}
+
+static void s3c_hsotg_ep_free_request(struct usb_ep *ep,
+ struct usb_request *req)
+{
+ struct s3c_hsotg_req *hs_req = our_req(req);
+
+ kfree(hs_req);
+}
+
+/**
+ * s3c_hsotg_complete_oursetup - setup completion callback
+ * @ep: The endpoint the request was on.
+ * @req: The request completed.
+ *
+ * Called on completion of any requests the driver itself
+ * submitted that need cleaning up.
+ */
+static void s3c_hsotg_complete_oursetup(struct usb_ep *ep,
+ struct usb_request *req)
+{
+ struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+ struct s3c_hsotg *hsotg = hs_ep->parent;
+
+ dev_dbg(hsotg->dev, "%s: ep %p, req %p\n", __func__, ep, req);
+
+ s3c_hsotg_ep_free_request(ep, req);
+}
+
+/**
+ * ep_from_windex - convert control wIndex value to endpoint
+ * @hsotg: The driver state.
+ * @windex: The control request wIndex field (in host order).
+ *
+ * Convert the given wIndex into a pointer to an driver endpoint
+ * structure, or return NULL if it is not a valid endpoint.
+*/
+static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg,
+ u32 windex)
+{
+ struct s3c_hsotg_ep *ep = &hsotg->eps[windex & 0x7F];
+ int dir = (windex & USB_DIR_IN) ? 1 : 0;
+ int idx = windex & 0x7F;
+
+ if (windex >= 0x100)
+ return NULL;
+
+ if (idx > S3C_HSOTG_EPS)
+ return NULL;
+
+ if (idx && ep->dir_in != dir)
+ return NULL;
+
+ return ep;
+}
+
+/**
+ * s3c_hsotg_send_reply - send reply to control request
+ * @hsotg: The device state
+ * @ep: Endpoint 0
+ * @buff: Buffer for request
+ * @length: Length of reply.
+ *
+ * Create a request and queue it on the given endpoint. This is useful as
+ * an internal method of sending replies to certain control requests, etc.
+ */
+static int s3c_hsotg_send_reply(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *ep,
+ void *buff,
+ int length)
+{
+ struct usb_request *req;
+ int ret;
+
+ dev_dbg(hsotg->dev, "%s: buff %p, len %d\n", __func__, buff, length);
+
+ req = s3c_hsotg_ep_alloc_request(&ep->ep, GFP_ATOMIC);
+ hsotg->ep0_reply = req;
+ if (!req) {
+ dev_warn(hsotg->dev, "%s: cannot alloc req\n", __func__);
+ return -ENOMEM;
+ }
+
+ req->buf = hsotg->ep0_buff;
+ req->length = length;
+ req->zero = 1; /* always do zero-length final transfer */
+ req->complete = s3c_hsotg_complete_oursetup;
+
+ if (length)
+ memcpy(req->buf, buff, length);
+ else
+ ep->sent_zlp = 1;
+
+ ret = s3c_hsotg_ep_queue(&ep->ep, req, GFP_ATOMIC);
+ if (ret) {
+ dev_warn(hsotg->dev, "%s: cannot queue req\n", __func__);
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * s3c_hsotg_process_req_status - process request GET_STATUS
+ * @hsotg: The device state
+ * @ctrl: USB control request
+ */
+static int s3c_hsotg_process_req_status(struct s3c_hsotg *hsotg,
+ struct usb_ctrlrequest *ctrl)
+{
+ struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
+ struct s3c_hsotg_ep *ep;
+ __le16 reply;
+ int ret;
+
+ dev_dbg(hsotg->dev, "%s: USB_REQ_GET_STATUS\n", __func__);
+
+ if (!ep0->dir_in) {
+ dev_warn(hsotg->dev, "%s: direction out?\n", __func__);
+ return -EINVAL;
+ }
+
+ switch (ctrl->bRequestType & USB_RECIP_MASK) {
+ case USB_RECIP_DEVICE:
+ reply = cpu_to_le16(0); /* bit 0 => self powered,
+ * bit 1 => remote wakeup */
+ break;
+
+ case USB_RECIP_INTERFACE:
+ /* currently, the data result should be zero */
+ reply = cpu_to_le16(0);
+ break;
+
+ case USB_RECIP_ENDPOINT:
+ ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex));
+ if (!ep)
+ return -ENOENT;
+
+ reply = cpu_to_le16(ep->halted ? 1 : 0);
+ break;
+
+ default:
+ return 0;
+ }
+
+ if (le16_to_cpu(ctrl->wLength) != 2)
+ return -EINVAL;
+
+ ret = s3c_hsotg_send_reply(hsotg, ep0, &reply, 2);
+ if (ret) {
+ dev_err(hsotg->dev, "%s: failed to send reply\n", __func__);
+ return ret;
+ }
+
+ return 1;
+}
+
+static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value);
+
+/**
+ * s3c_hsotg_process_req_featire - process request {SET,CLEAR}_FEATURE
+ * @hsotg: The device state
+ * @ctrl: USB control request
+ */
+static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
+ struct usb_ctrlrequest *ctrl)
+{
+ bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
+ struct s3c_hsotg_ep *ep;
+
+ dev_dbg(hsotg->dev, "%s: %s_FEATURE\n",
+ __func__, set ? "SET" : "CLEAR");
+
+ if (ctrl->bRequestType == USB_RECIP_ENDPOINT) {
+ ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex));
+ if (!ep) {
+ dev_dbg(hsotg->dev, "%s: no endpoint for 0x%04x\n",
+ __func__, le16_to_cpu(ctrl->wIndex));
+ return -ENOENT;
+ }
+
+ switch (le16_to_cpu(ctrl->wValue)) {
+ case USB_ENDPOINT_HALT:
+ s3c_hsotg_ep_sethalt(&ep->ep, set);
+ break;
+
+ default:
+ return -ENOENT;
+ }
+ } else
+ return -ENOENT; /* currently only deal with endpoint */
+
+ return 1;
+}
+
+/**
+ * s3c_hsotg_process_control - process a control request
+ * @hsotg: The device state
+ * @ctrl: The control request received
+ *
+ * The controller has received the SETUP phase of a control request, and
+ * needs to work out what to do next (and whether to pass it on to the
+ * gadget driver).
+ */
+static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
+ struct usb_ctrlrequest *ctrl)
+{
+ struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
+ int ret = 0;
+ u32 dcfg;
+
+ ep0->sent_zlp = 0;
+
+ dev_dbg(hsotg->dev, "ctrl Req=%02x, Type=%02x, V=%04x, L=%04x\n",
+ ctrl->bRequest, ctrl->bRequestType,
+ ctrl->wValue, ctrl->wLength);
+
+ /* record the direction of the request, for later use when enquing
+ * packets onto EP0. */
+
+ ep0->dir_in = (ctrl->bRequestType & USB_DIR_IN) ? 1 : 0;
+ dev_dbg(hsotg->dev, "ctrl: dir_in=%d\n", ep0->dir_in);
+
+ /* if we've no data with this request, then the last part of the
+ * transaction is going to implicitly be IN. */
+ if (ctrl->wLength == 0)
+ ep0->dir_in = 1;
+
+ if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+ switch (ctrl->bRequest) {
+ case USB_REQ_SET_ADDRESS:
+ dcfg = readl(hsotg->regs + S3C_DCFG);
+ dcfg &= ~S3C_DCFG_DevAddr_MASK;
+ dcfg |= ctrl->wValue << S3C_DCFG_DevAddr_SHIFT;
+ writel(dcfg, hsotg->regs + S3C_DCFG);
+
+ dev_info(hsotg->dev, "new address %d\n", ctrl->wValue);
+
+ ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0);
+ return;
+
+ case USB_REQ_GET_STATUS:
+ ret = s3c_hsotg_process_req_status(hsotg, ctrl);
+ break;
+
+ case USB_REQ_CLEAR_FEATURE:
+ case USB_REQ_SET_FEATURE:
+ ret = s3c_hsotg_process_req_feature(hsotg, ctrl);
+ break;
+ }
+ }
+
+ /* as a fallback, try delivering it to the driver to deal with */
+
+ if (ret == 0 && hsotg->driver) {
+ ret = hsotg->driver->setup(&hsotg->gadget, ctrl);
+ if (ret < 0)
+ dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret);
+ }
+
+ if (ret > 0) {
+ if (!ep0->dir_in) {
+ /* need to generate zlp in reply or take data */
+ /* todo - deal with any data we might be sent? */
+ ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0);
+ }
+ }
+
+ /* the request is either unhandlable, or is not formatted correctly
+ * so respond with a STALL for the status stage to indicate failure.
+ */
+
+ if (ret < 0) {
+ u32 reg;
+ u32 ctrl;
+
+ dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in);
+ reg = (ep0->dir_in) ? S3C_DIEPCTL0 : S3C_DOEPCTL0;
+
+ /* S3C_DxEPCTL_Stall will be cleared by EP once it has
+ * taken effect, so no need to clear later. */
+
+ ctrl = readl(hsotg->regs + reg);
+ ctrl |= S3C_DxEPCTL_Stall;
+ ctrl |= S3C_DxEPCTL_CNAK;
+ writel(ctrl, hsotg->regs + reg);
+
+ dev_dbg(hsotg->dev,
+ "writen DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
+ ctrl, reg, readl(hsotg->regs + reg));
+
+ /* don't belive we need to anything more to get the EP
+ * to reply with a STALL packet */
+ }
+}
+
+static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
+
+/**
+ * s3c_hsotg_complete_setup - completion of a setup transfer
+ * @ep: The endpoint the request was on.
+ * @req: The request completed.
+ *
+ * Called on completion of any requests the driver itself submitted for
+ * EP0 setup packets
+ */
+static void s3c_hsotg_complete_setup(struct usb_ep *ep,
+ struct usb_request *req)
+{
+ struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+ struct s3c_hsotg *hsotg = hs_ep->parent;
+
+ if (req->status < 0) {
+ dev_dbg(hsotg->dev, "%s: failed %d\n", __func__, req->status);
+ return;
+ }
+
+ if (req->actual == 0)
+ s3c_hsotg_enqueue_setup(hsotg);
+ else
+ s3c_hsotg_process_control(hsotg, req->buf);
+}
+
+/**
+ * s3c_hsotg_enqueue_setup - start a request for EP0 packets
+ * @hsotg: The device state.
+ *
+ * Enqueue a request on EP0 if necessary to received any SETUP packets
+ * received from the host.
+ */
+static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg)
+{
+ struct usb_request *req = hsotg->ctrl_req;
+ struct s3c_hsotg_req *hs_req = our_req(req);
+ int ret;
+
+ dev_dbg(hsotg->dev, "%s: queueing setup request\n", __func__);
+
+ req->zero = 0;
+ req->length = 8;
+ req->buf = hsotg->ctrl_buff;
+ req->complete = s3c_hsotg_complete_setup;
+
+ if (!list_empty(&hs_req->queue)) {
+ dev_dbg(hsotg->dev, "%s already queued???\n", __func__);
+ return;
+ }
+
+ hsotg->eps[0].dir_in = 0;
+
+ ret = s3c_hsotg_ep_queue(&hsotg->eps[0].ep, req, GFP_ATOMIC);
+ if (ret < 0) {
+ dev_err(hsotg->dev, "%s: failed queue (%d)\n", __func__, ret);
+ /* Don't think there's much we can do other than watch the
+ * driver fail. */
+ }
+}
+
+/**
+ * get_ep_head - return the first request on the endpoint
+ * @hs_ep: The controller endpoint to get
+ *
+ * Get the first request on the endpoint.
+*/
+static struct s3c_hsotg_req *get_ep_head(struct s3c_hsotg_ep *hs_ep)
+{
+ if (list_empty(&hs_ep->queue))
+ return NULL;
+
+ return list_first_entry(&hs_ep->queue, struct s3c_hsotg_req, queue);
+}
+
+/**
+ * s3c_hsotg_complete_request - complete a request given to us
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint the request was on.
+ * @hs_req: The request to complete.
+ * @result: The result code (0 => Ok, otherwise errno)
+ *
+ * The given request has finished, so call the necessary completion
+ * if it has one and then look to see if we can start a new request
+ * on the endpoint.
+ *
+ * Note, expects the ep to already be locked as appropriate.
+*/
+static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep,
+ struct s3c_hsotg_req *hs_req,
+ int result)
+{
+ bool restart;
+
+ if (!hs_req) {
+ dev_dbg(hsotg->dev, "%s: nothing to complete?\n", __func__);
+ return;
+ }
+
+ dev_dbg(hsotg->dev, "complete: ep %p %s, req %p, %d => %p\n",
+ hs_ep, hs_ep->ep.name, hs_req, result, hs_req->req.complete);
+
+ /* only replace the status if we've not already set an error
+ * from a previous transaction */
+
+ if (hs_req->req.status == -EINPROGRESS)
+ hs_req->req.status = result;
+
+ hs_ep->req = NULL;
+ list_del_init(&hs_req->queue);
+
+ if (using_dma(hsotg))
+ s3c_hsotg_unmap_dma(hsotg, hs_ep, hs_req);
+
+ /* call the complete request with the locks off, just in case the
+ * request tries to queue more work for this endpoint. */
+
+ if (hs_req->req.complete) {
+ spin_unlock(&hs_ep->lock);
+ hs_req->req.complete(&hs_ep->ep, &hs_req->req);
+ spin_lock(&hs_ep->lock);
+ }
+
+ /* Look to see if there is anything else to do. Note, the completion
+ * of the previous request may have caused a new request to be started
+ * so be careful when doing this. */
+
+ if (!hs_ep->req && result >= 0) {
+ restart = !list_empty(&hs_ep->queue);
+ if (restart) {
+ hs_req = get_ep_head(hs_ep);
+ s3c_hsotg_start_req(hsotg, hs_ep, hs_req, false);
+ }
+ }
+}
+
+/**
+ * s3c_hsotg_complete_request_lock - complete a request given to us (locked)
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint the request was on.
+ * @hs_req: The request to complete.
+ * @result: The result code (0 => Ok, otherwise errno)
+ *
+ * See s3c_hsotg_complete_request(), but called with the endpoint's
+ * lock held.
+*/
+static void s3c_hsotg_complete_request_lock(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep,
+ struct s3c_hsotg_req *hs_req,
+ int result)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&hs_ep->lock, flags);
+ s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
+ spin_unlock_irqrestore(&hs_ep->lock, flags);
+}
+
+/**
+ * s3c_hsotg_rx_data - receive data from the FIFO for an endpoint
+ * @hsotg: The device state.
+ * @ep_idx: The endpoint index for the data
+ * @size: The size of data in the fifo, in bytes
+ *
+ * The FIFO status shows there is data to read from the FIFO for a given
+ * endpoint, so sort out whether we need to read the data into a request
+ * that has been made for that endpoint.
+ */
+static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
+{
+ struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep_idx];
+ struct s3c_hsotg_req *hs_req = hs_ep->req;
+ void __iomem *fifo = hsotg->regs + S3C_EPFIFO(ep_idx);
+ int to_read;
+ int max_req;
+ int read_ptr;
+
+ if (!hs_req) {
+ u32 epctl = readl(hsotg->regs + S3C_DOEPCTL(ep_idx));
+ int ptr;
+
+ dev_warn(hsotg->dev,
+ "%s: FIFO %d bytes on ep%d but no req (DxEPCTl=0x%08x)\n",
+ __func__, size, ep_idx, epctl);
+
+ /* dump the data from the FIFO, we've nothing we can do */
+ for (ptr = 0; ptr < size; ptr += 4)
+ (void)readl(fifo);
+
+ return;
+ }
+
+ spin_lock(&hs_ep->lock);
+
+ to_read = size;
+ read_ptr = hs_req->req.actual;
+ max_req = hs_req->req.length - read_ptr;
+
+ if (to_read > max_req) {
+ /* more data appeared than we where willing
+ * to deal with in this request.
+ */
+
+ /* currently we don't deal this */
+ WARN_ON_ONCE(1);
+ }
+
+ dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n",
+ __func__, to_read, max_req, read_ptr, hs_req->req.length);
+
+ hs_ep->total_data += to_read;
+ hs_req->req.actual += to_read;
+ to_read = DIV_ROUND_UP(to_read, 4);
+
+ /* note, we might over-write the buffer end by 3 bytes depending on
+ * alignment of the data. */
+ readsl(fifo, hs_req->req.buf + read_ptr, to_read);
+
+ spin_unlock(&hs_ep->lock);
+}
+
+/**
+ * s3c_hsotg_send_zlp - send zero-length packet on control endpoint
+ * @hsotg: The device instance
+ * @req: The request currently on this endpoint
+ *
+ * Generate a zero-length IN packet request for terminating a SETUP
+ * transaction.
+ *
+ * Note, since we don't write any data to the TxFIFO, then it is
+ * currently belived that we do not need to wait for any space in
+ * the TxFIFO.
+ */
+static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_req *req)
+{
+ u32 ctrl;
+
+ if (!req) {
+ dev_warn(hsotg->dev, "%s: no request?\n", __func__);
+ return;
+ }
+
+ if (req->req.length == 0) {
+ hsotg->eps[0].sent_zlp = 1;
+ s3c_hsotg_enqueue_setup(hsotg);
+ return;
+ }
+
+ hsotg->eps[0].dir_in = 1;
+ hsotg->eps[0].sent_zlp = 1;
+
+ dev_dbg(hsotg->dev, "sending zero-length packet\n");
+
+ /* issue a zero-sized packet to terminate this */
+ writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) |
+ S3C_DxEPTSIZ_XferSize(0), hsotg->regs + S3C_DIEPTSIZ(0));
+
+ ctrl = readl(hsotg->regs + S3C_DIEPCTL0);
+ ctrl |= S3C_DxEPCTL_CNAK; /* clear NAK set by core */
+ ctrl |= S3C_DxEPCTL_EPEna; /* ensure ep enabled */
+ ctrl |= S3C_DxEPCTL_USBActEp;
+ writel(ctrl, hsotg->regs + S3C_DIEPCTL0);
+}
+
+/**
+ * s3c_hsotg_handle_outdone - handle receiving OutDone/SetupDone from RXFIFO
+ * @hsotg: The device instance
+ * @epnum: The endpoint received from
+ * @was_setup: Set if processing a SetupDone event.
+ *
+ * The RXFIFO has delivered an OutDone event, which means that the data
+ * transfer for an OUT endpoint has been completed, either by a short
+ * packet or by the finish of a transfer.
+*/
+static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
+ int epnum, bool was_setup)
+{
+ struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum];
+ struct s3c_hsotg_req *hs_req = hs_ep->req;
+ struct usb_request *req = &hs_req->req;
+ int result = 0;
+
+ if (!hs_req) {
+ dev_dbg(hsotg->dev, "%s: no request active\n", __func__);
+ return;
+ }
+
+ if (using_dma(hsotg)) {
+ u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum));
+ unsigned size_done;
+ unsigned size_left;
+
+ /* Calculate the size of the transfer by checking how much
+ * is left in the endpoint size register and then working it
+ * out from the amount we loaded for the transfer.
+ *
+ * We need to do this as DMA pointers are always 32bit aligned
+ * so may overshoot/undershoot the transfer.
+ */
+
+ size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
+
+ size_done = hs_ep->size_loaded - size_left;
+ size_done += hs_ep->last_load;
+
+ req->actual = size_done;
+ }
+
+ if (req->actual < req->length && req->short_not_ok) {
+ dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n",
+ __func__, req->actual, req->length);
+
+ /* todo - what should we return here? there's no one else
+ * even bothering to check the status. */
+ }
+
+ if (epnum == 0) {
+ if (!was_setup && req->complete != s3c_hsotg_complete_setup)
+ s3c_hsotg_send_zlp(hsotg, hs_req);
+ }
+
+ s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, result);
+}
+
+/**
+ * s3c_hsotg_read_frameno - read current frame number
+ * @hsotg: The device instance
+ *
+ * Return the current frame number
+*/
+static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
+{
+ u32 dsts;
+
+ dsts = readl(hsotg->regs + S3C_DSTS);
+ dsts &= S3C_DSTS_SOFFN_MASK;
+ dsts >>= S3C_DSTS_SOFFN_SHIFT;
+
+ return dsts;
+}
+
+/**
+ * s3c_hsotg_handle_rx - RX FIFO has data
+ * @hsotg: The device instance
+ *
+ * The IRQ handler has detected that the RX FIFO has some data in it
+ * that requires processing, so find out what is in there and do the
+ * appropriate read.
+ *
+ * The RXFIFO is a true FIFO, the packets comming out are still in packet
+ * chunks, so if you have x packets received on an endpoint you'll get x
+ * FIFO events delivered, each with a packet's worth of data in it.
+ *
+ * When using DMA, we should not be processing events from the RXFIFO
+ * as the actual data should be sent to the memory directly and we turn
+ * on the completion interrupts to get notifications of transfer completion.
+ */
+void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg)
+{
+ u32 grxstsr = readl(hsotg->regs + S3C_GRXSTSP);
+ u32 epnum, status, size;
+
+ WARN_ON(using_dma(hsotg));
+
+ epnum = grxstsr & S3C_GRXSTS_EPNum_MASK;
+ status = grxstsr & S3C_GRXSTS_PktSts_MASK;
+
+ size = grxstsr & S3C_GRXSTS_ByteCnt_MASK;
+ size >>= S3C_GRXSTS_ByteCnt_SHIFT;
+
+ if (1)
+ dev_dbg(hsotg->dev, "%s: GRXSTSP=0x%08x (%d@%d)\n",
+ __func__, grxstsr, size, epnum);
+
+#define __status(x) ((x) >> S3C_GRXSTS_PktSts_SHIFT)
+
+ switch (status >> S3C_GRXSTS_PktSts_SHIFT) {
+ case __status(S3C_GRXSTS_PktSts_GlobalOutNAK):
+ dev_dbg(hsotg->dev, "GlobalOutNAK\n");
+ break;
+
+ case __status(S3C_GRXSTS_PktSts_OutDone):
+ dev_dbg(hsotg->dev, "OutDone (Frame=0x%08x)\n",
+ s3c_hsotg_read_frameno(hsotg));
+
+ if (!using_dma(hsotg))
+ s3c_hsotg_handle_outdone(hsotg, epnum, false);
+ break;
+
+ case __status(S3C_GRXSTS_PktSts_SetupDone):
+ dev_dbg(hsotg->dev,
+ "SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
+ s3c_hsotg_read_frameno(hsotg),
+ readl(hsotg->regs + S3C_DOEPCTL(0)));
+
+ s3c_hsotg_handle_outdone(hsotg, epnum, true);
+ break;
+
+ case __status(S3C_GRXSTS_PktSts_OutRX):
+ s3c_hsotg_rx_data(hsotg, epnum, size);
+ break;
+
+ case __status(S3C_GRXSTS_PktSts_SetupRX):
+ dev_dbg(hsotg->dev,
+ "SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
+ s3c_hsotg_read_frameno(hsotg),
+ readl(hsotg->regs + S3C_DOEPCTL(0)));
+
+ s3c_hsotg_rx_data(hsotg, epnum, size);
+ break;
+
+ default:
+ dev_warn(hsotg->dev, "%s: unknown status %08x\n",
+ __func__, grxstsr);
+
+ s3c_hsotg_dump(hsotg);
+ break;
+ }
+}
+
+/**
+ * s3c_hsotg_ep0_mps - turn max packet size into register setting
+ * @mps: The maximum packet size in bytes.
+*/
+static u32 s3c_hsotg_ep0_mps(unsigned int mps)
+{
+ switch (mps) {
+ case 64:
+ return S3C_D0EPCTL_MPS_64;
+ case 32:
+ return S3C_D0EPCTL_MPS_32;
+ case 16:
+ return S3C_D0EPCTL_MPS_16;
+ case 8:
+ return S3C_D0EPCTL_MPS_8;
+ }
+
+ /* bad max packet size, warn and return invalid result */
+ WARN_ON(1);
+ return (u32)-1;
+}
+
+/**
+ * s3c_hsotg_set_ep_maxpacket - set endpoint's max-packet field
+ * @hsotg: The driver state.
+ * @ep: The index number of the endpoint
+ * @mps: The maximum packet size in bytes
+ *
+ * Configure the maximum packet size for the given endpoint, updating
+ * the hardware control registers to reflect this.
+ */
+static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg,
+ unsigned int ep, unsigned int mps)
+{
+ struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep];
+ void __iomem *regs = hsotg->regs;
+ u32 mpsval;
+ u32 reg;
+
+ if (ep == 0) {
+ /* EP0 is a special case */
+ mpsval = s3c_hsotg_ep0_mps(mps);
+ if (mpsval > 3)
+ goto bad_mps;
+ } else {
+ if (mps >= S3C_DxEPCTL_MPS_LIMIT+1)
+ goto bad_mps;
+
+ mpsval = mps;
+ }
+
+ hs_ep->ep.maxpacket = mps;
+
+ /* update both the in and out endpoint controldir_ registers, even
+ * if one of the directions may not be in use. */
+
+ reg = readl(regs + S3C_DIEPCTL(ep));
+ reg &= ~S3C_DxEPCTL_MPS_MASK;
+ reg |= mpsval;
+ writel(reg, regs + S3C_DIEPCTL(ep));
+
+ reg = readl(regs + S3C_DOEPCTL(ep));
+ reg &= ~S3C_DxEPCTL_MPS_MASK;
+ reg |= mpsval;
+ writel(reg, regs + S3C_DOEPCTL(ep));
+
+ return;
+
+bad_mps:
+ dev_err(hsotg->dev, "ep%d: bad mps of %d\n", ep, mps);
+}
+
+
+/**
+ * s3c_hsotg_trytx - check to see if anything needs transmitting
+ * @hsotg: The driver state
+ * @hs_ep: The driver endpoint to check.
+ *
+ * Check to see if there is a request that has data to send, and if so
+ * make an attempt to write data into the FIFO.
+ */
+static int s3c_hsotg_trytx(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep)
+{
+ struct s3c_hsotg_req *hs_req = hs_ep->req;
+
+ if (!hs_ep->dir_in || !hs_req)
+ return 0;
+
+ if (hs_req->req.actual < hs_req->req.length) {
+ dev_dbg(hsotg->dev, "trying to write more for ep%d\n",
+ hs_ep->index);
+ return s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req);
+ }
+
+ return 0;
+}
+
+/**
+ * s3c_hsotg_complete_in - complete IN transfer
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint that has just completed.
+ *
+ * An IN transfer has been completed, update the transfer's state and then
+ * call the relevant completion routines.
+ */
+static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep)
+{
+ struct s3c_hsotg_req *hs_req = hs_ep->req;
+ u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index));
+ int size_left, size_done;
+
+ if (!hs_req) {
+ dev_dbg(hsotg->dev, "XferCompl but no req\n");
+ return;
+ }
+
+ /* Calculate the size of the transfer by checking how much is left
+ * in the endpoint size register and then working it out from
+ * the amount we loaded for the transfer.
+ *
+ * We do this even for DMA, as the transfer may have incremented
+ * past the end of the buffer (DMA transfers are always 32bit
+ * aligned).
+ */
+
+ size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
+
+ size_done = hs_ep->size_loaded - size_left;
+ size_done += hs_ep->last_load;
+
+ if (hs_req->req.actual != size_done)
+ dev_dbg(hsotg->dev, "%s: adjusting size done %d => %d\n",
+ __func__, hs_req->req.actual, size_done);
+
+ hs_req->req.actual = size_done;
+
+ /* if we did all of the transfer, and there is more data left
+ * around, then try restarting the rest of the request */
+
+ if (!size_left && hs_req->req.actual < hs_req->req.length) {
+ dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__);
+ s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true);
+ } else
+ s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, 0);
+}
+
+/**
+ * s3c_hsotg_epint - handle an in/out endpoint interrupt
+ * @hsotg: The driver state
+ * @idx: The index for the endpoint (0..15)
+ * @dir_in: Set if this is an IN endpoint
+ *
+ * Process and clear any interrupt pending for an individual endpoint
+*/
+static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
+ int dir_in)
+{
+ struct s3c_hsotg_ep *hs_ep = &hsotg->eps[idx];
+ u32 epint_reg = dir_in ? S3C_DIEPINT(idx) : S3C_DOEPINT(idx);
+ u32 epctl_reg = dir_in ? S3C_DIEPCTL(idx) : S3C_DOEPCTL(idx);
+ u32 epsiz_reg = dir_in ? S3C_DIEPTSIZ(idx) : S3C_DOEPTSIZ(idx);
+ u32 ints;
+ u32 clear = 0;
+
+ ints = readl(hsotg->regs + epint_reg);
+
+ dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n",
+ __func__, idx, dir_in ? "in" : "out", ints);
+
+ if (ints & S3C_DxEPINT_XferCompl) {
+ dev_dbg(hsotg->dev,
+ "%s: XferCompl: DxEPCTL=0x%08x, DxEPTSIZ=%08x\n",
+ __func__, readl(hsotg->regs + epctl_reg),
+ readl(hsotg->regs + epsiz_reg));
+
+ /* we get OutDone from the FIFO, so we only need to look
+ * at completing IN requests here */
+ if (dir_in) {
+ s3c_hsotg_complete_in(hsotg, hs_ep);
+
+ if (idx == 0)
+ s3c_hsotg_enqueue_setup(hsotg);
+ } else if (using_dma(hsotg)) {
+ /* We're using DMA, we need to fire an OutDone here
+ * as we ignore the RXFIFO. */
+
+ s3c_hsotg_handle_outdone(hsotg, idx, false);
+ }
+
+ clear |= S3C_DxEPINT_XferCompl;
+ }
+
+ if (ints & S3C_DxEPINT_EPDisbld) {
+ dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__);
+ clear |= S3C_DxEPINT_EPDisbld;
+ }
+
+ if (ints & S3C_DxEPINT_AHBErr) {
+ dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__);
+ clear |= S3C_DxEPINT_AHBErr;
+ }
+
+ if (ints & S3C_DxEPINT_Setup) { /* Setup or Timeout */
+ dev_dbg(hsotg->dev, "%s: Setup/Timeout\n", __func__);
+
+ if (using_dma(hsotg) && idx == 0) {
+ /* this is the notification we've received a
+ * setup packet. In non-DMA mode we'd get this
+ * from the RXFIFO, instead we need to process
+ * the setup here. */
+
+ if (dir_in)
+ WARN_ON_ONCE(1);
+ else
+ s3c_hsotg_handle_outdone(hsotg, 0, true);
+ }
+
+ clear |= S3C_DxEPINT_Setup;
+ }
+
+ if (ints & S3C_DxEPINT_Back2BackSetup) {
+ dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__);
+ clear |= S3C_DxEPINT_Back2BackSetup;
+ }
+
+ if (dir_in) {
+ /* not sure if this is important, but we'll clear it anyway
+ */
+ if (ints & S3C_DIEPMSK_INTknTXFEmpMsk) {
+ dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n",
+ __func__, idx);
+ clear |= S3C_DIEPMSK_INTknTXFEmpMsk;
+ }
+
+ /* this probably means something bad is happening */
+ if (ints & S3C_DIEPMSK_INTknEPMisMsk) {
+ dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n",
+ __func__, idx);
+ clear |= S3C_DIEPMSK_INTknEPMisMsk;
+ }
+ }
+
+ writel(clear, hsotg->regs + epint_reg);
+}
+
+/**
+ * s3c_hsotg_irq_enumdone - Handle EnumDone interrupt (enumeration done)
+ * @hsotg: The device state.
+ *
+ * Handle updating the device settings after the enumeration phase has
+ * been completed.
+*/
+static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
+{
+ u32 dsts = readl(hsotg->regs + S3C_DSTS);
+ int ep0_mps = 0, ep_mps;
+
+ /* This should signal the finish of the enumeration phase
+ * of the USB handshaking, so we should now know what rate
+ * we connected at. */
+
+ dev_dbg(hsotg->dev, "EnumDone (DSTS=0x%08x)\n", dsts);
+
+ /* note, since we're limited by the size of transfer on EP0, and
+ * it seems IN transfers must be a even number of packets we do
+ * not advertise a 64byte MPS on EP0. */
+
+ /* catch both EnumSpd_FS and EnumSpd_FS48 */
+ switch (dsts & S3C_DSTS_EnumSpd_MASK) {
+ case S3C_DSTS_EnumSpd_FS:
+ case S3C_DSTS_EnumSpd_FS48:
+ hsotg->gadget.speed = USB_SPEED_FULL;
+ dev_info(hsotg->dev, "new device is full-speed\n");
+
+ ep0_mps = EP0_MPS_LIMIT;
+ ep_mps = 64;
+ break;
+
+ case S3C_DSTS_EnumSpd_HS:
+ dev_info(hsotg->dev, "new device is high-speed\n");
+ hsotg->gadget.speed = USB_SPEED_HIGH;
+
+ ep0_mps = EP0_MPS_LIMIT;
+ ep_mps = 512;
+ break;
+
+ case S3C_DSTS_EnumSpd_LS:
+ hsotg->gadget.speed = USB_SPEED_LOW;
+ dev_info(hsotg->dev, "new device is low-speed\n");
+
+ /* note, we don't actually support LS in this driver at the
+ * moment, and the documentation seems to imply that it isn't
+ * supported by the PHYs on some of the devices.
+ */
+ break;
+ }
+
+ /* we should now know the maximum packet size for an
+ * endpoint, so set the endpoints to a default value. */
+
+ if (ep0_mps) {
+ int i;
+ s3c_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps);
+ for (i = 1; i < S3C_HSOTG_EPS; i++)
+ s3c_hsotg_set_ep_maxpacket(hsotg, i, ep_mps);
+ }
+
+ /* ensure after enumeration our EP0 is active */
+
+ s3c_hsotg_enqueue_setup(hsotg);
+
+ dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+ readl(hsotg->regs + S3C_DIEPCTL0),
+ readl(hsotg->regs + S3C_DOEPCTL0));
+}
+
+/**
+ * kill_all_requests - remove all requests from the endpoint's queue
+ * @hsotg: The device state.
+ * @ep: The endpoint the requests may be on.
+ * @result: The result code to use.
+ * @force: Force removal of any current requests
+ *
+ * Go through the requests on the given endpoint and mark them
+ * completed with the given result code.
+ */
+static void kill_all_requests(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *ep,
+ int result, bool force)
+{
+ struct s3c_hsotg_req *req, *treq;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ep->lock, flags);
+
+ list_for_each_entry_safe(req, treq, &ep->queue, queue) {
+ /* currently, we can't do much about an already
+ * running request on an in endpoint */
+
+ if (ep->req == req && ep->dir_in && !force)
+ continue;
+
+ s3c_hsotg_complete_request(hsotg, ep, req,
+ result);
+ }
+
+ spin_unlock_irqrestore(&ep->lock, flags);
+}
+
+#define call_gadget(_hs, _entry) \
+ if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \
+ (_hs)->driver && (_hs)->driver->_entry) \
+ (_hs)->driver->_entry(&(_hs)->gadget);
+
+/**
+ * s3c_hsotg_disconnect_irq - disconnect irq service
+ * @hsotg: The device state.
+ *
+ * A disconnect IRQ has been received, meaning that the host has
+ * lost contact with the bus. Remove all current transactions
+ * and signal the gadget driver that this has happened.
+*/
+static void s3c_hsotg_disconnect_irq(struct s3c_hsotg *hsotg)
+{
+ unsigned ep;
+
+ for (ep = 0; ep < S3C_HSOTG_EPS; ep++)
+ kill_all_requests(hsotg, &hsotg->eps[ep], -ESHUTDOWN, true);
+
+ call_gadget(hsotg, disconnect);
+}
+
+/**
+ * s3c_hsotg_irq_fifoempty - TX FIFO empty interrupt handler
+ * @hsotg: The device state:
+ * @periodic: True if this is a periodic FIFO interrupt
+ */
+static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic)
+{
+ struct s3c_hsotg_ep *ep;
+ int epno, ret;
+
+ /* look through for any more data to transmit */
+
+ for (epno = 0; epno < S3C_HSOTG_EPS; epno++) {
+ ep = &hsotg->eps[epno];
+
+ if (!ep->dir_in)
+ continue;
+
+ if ((periodic && !ep->periodic) ||
+ (!periodic && ep->periodic))
+ continue;
+
+ ret = s3c_hsotg_trytx(hsotg, ep);
+ if (ret < 0)
+ break;
+ }
+}
+
+static struct s3c_hsotg *our_hsotg;
+
+/* IRQ flags which will trigger a retry around the IRQ loop */
+#define IRQ_RETRY_MASK (S3C_GINTSTS_NPTxFEmp | \
+ S3C_GINTSTS_PTxFEmp | \
+ S3C_GINTSTS_RxFLvl)
+
+/**
+ * s3c_hsotg_irq - handle device interrupt
+ * @irq: The IRQ number triggered
+ * @pw: The pw value when registered the handler.
+ */
+static irqreturn_t s3c_hsotg_irq(int irq, void *pw)
+{
+ struct s3c_hsotg *hsotg = pw;
+ int retry_count = 8;
+ u32 gintsts;
+ u32 gintmsk;
+
+irq_retry:
+ gintsts = readl(hsotg->regs + S3C_GINTSTS);
+ gintmsk = readl(hsotg->regs + S3C_GINTMSK);
+
+ dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n",
+ __func__, gintsts, gintsts & gintmsk, gintmsk, retry_count);
+
+ gintsts &= gintmsk;
+
+ if (gintsts & S3C_GINTSTS_OTGInt) {
+ u32 otgint = readl(hsotg->regs + S3C_GOTGINT);
+
+ dev_info(hsotg->dev, "OTGInt: %08x\n", otgint);
+
+ writel(otgint, hsotg->regs + S3C_GOTGINT);
+ writel(S3C_GINTSTS_OTGInt, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_DisconnInt) {
+ dev_dbg(hsotg->dev, "%s: DisconnInt\n", __func__);
+ writel(S3C_GINTSTS_DisconnInt, hsotg->regs + S3C_GINTSTS);
+
+ s3c_hsotg_disconnect_irq(hsotg);
+ }
+
+ if (gintsts & S3C_GINTSTS_SessReqInt) {
+ dev_dbg(hsotg->dev, "%s: SessReqInt\n", __func__);
+ writel(S3C_GINTSTS_SessReqInt, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_EnumDone) {
+ s3c_hsotg_irq_enumdone(hsotg);
+ writel(S3C_GINTSTS_EnumDone, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_ConIDStsChng) {
+ dev_dbg(hsotg->dev, "ConIDStsChg (DSTS=0x%08x, GOTCTL=%08x)\n",
+ readl(hsotg->regs + S3C_DSTS),
+ readl(hsotg->regs + S3C_GOTGCTL));
+
+ writel(S3C_GINTSTS_ConIDStsChng, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & (S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt)) {
+ u32 daint = readl(hsotg->regs + S3C_DAINT);
+ u32 daint_out = daint >> S3C_DAINT_OutEP_SHIFT;
+ u32 daint_in = daint & ~(daint_out << S3C_DAINT_OutEP_SHIFT);
+ int ep;
+
+ dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint);
+
+ for (ep = 0; ep < 15 && daint_out; ep++, daint_out >>= 1) {
+ if (daint_out & 1)
+ s3c_hsotg_epint(hsotg, ep, 0);
+ }
+
+ for (ep = 0; ep < 15 && daint_in; ep++, daint_in >>= 1) {
+ if (daint_in & 1)
+ s3c_hsotg_epint(hsotg, ep, 1);
+ }
+
+ writel(daint, hsotg->regs + S3C_DAINT);
+ writel(gintsts & (S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt),
+ hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_USBRst) {
+ dev_info(hsotg->dev, "%s: USBRst\n", __func__);
+ dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
+ readl(hsotg->regs + S3C_GNPTXSTS));
+
+ kill_all_requests(hsotg, &hsotg->eps[0], -ECONNRESET, true);
+
+ /* it seems after a reset we can end up with a situation
+ * where the TXFIFO still has data in it... try flushing
+ * it to remove anything that may still be in it.
+ */
+
+ if (1) {
+ writel(S3C_GRSTCTL_TxFNum(0) | S3C_GRSTCTL_TxFFlsh,
+ hsotg->regs + S3C_GRSTCTL);
+
+ dev_info(hsotg->dev, "GNPTXSTS=%08x\n",
+ readl(hsotg->regs + S3C_GNPTXSTS));
+ }
+
+ s3c_hsotg_enqueue_setup(hsotg);
+
+ writel(S3C_GINTSTS_USBRst, hsotg->regs + S3C_GINTSTS);
+ }
+
+ /* check both FIFOs */
+
+ if (gintsts & S3C_GINTSTS_NPTxFEmp) {
+ dev_dbg(hsotg->dev, "NPTxFEmp\n");
+
+ /* Disable the interrupt to stop it happening again
+ * unless one of these endpoint routines decides that
+ * it needs re-enabling */
+
+ s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_NPTxFEmp);
+ s3c_hsotg_irq_fifoempty(hsotg, false);
+
+ writel(S3C_GINTSTS_NPTxFEmp, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_PTxFEmp) {
+ dev_dbg(hsotg->dev, "PTxFEmp\n");
+
+ /* See note in S3C_GINTSTS_NPTxFEmp */
+
+ s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
+ s3c_hsotg_irq_fifoempty(hsotg, true);
+
+ writel(S3C_GINTSTS_PTxFEmp, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_RxFLvl) {
+ /* note, since GINTSTS_RxFLvl doubles as FIFO-not-empty,
+ * we need to retry s3c_hsotg_handle_rx if this is still
+ * set. */
+
+ s3c_hsotg_handle_rx(hsotg);
+ writel(S3C_GINTSTS_RxFLvl, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_ModeMis) {
+ dev_warn(hsotg->dev, "warning, mode mismatch triggered\n");
+ writel(S3C_GINTSTS_ModeMis, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_USBSusp) {
+ dev_info(hsotg->dev, "S3C_GINTSTS_USBSusp\n");
+ writel(S3C_GINTSTS_USBSusp, hsotg->regs + S3C_GINTSTS);
+
+ call_gadget(hsotg, suspend);
+ }
+
+ if (gintsts & S3C_GINTSTS_WkUpInt) {
+ dev_info(hsotg->dev, "S3C_GINTSTS_WkUpIn\n");
+ writel(S3C_GINTSTS_WkUpInt, hsotg->regs + S3C_GINTSTS);
+
+ call_gadget(hsotg, resume);
+ }
+
+ if (gintsts & S3C_GINTSTS_ErlySusp) {
+ dev_dbg(hsotg->dev, "S3C_GINTSTS_ErlySusp\n");
+ writel(S3C_GINTSTS_ErlySusp, hsotg->regs + S3C_GINTSTS);
+ }
+
+ /* these next two seem to crop-up occasionally causing the core
+ * to shutdown the USB transfer, so try clearing them and logging
+ * the occurence. */
+
+ if (gintsts & S3C_GINTSTS_GOUTNakEff) {
+ dev_info(hsotg->dev, "GOUTNakEff triggered\n");
+
+ s3c_hsotg_dump(hsotg);
+
+ writel(S3C_DCTL_CGOUTNak, hsotg->regs + S3C_DCTL);
+ writel(S3C_GINTSTS_GOUTNakEff, hsotg->regs + S3C_GINTSTS);
+ }
+
+ if (gintsts & S3C_GINTSTS_GINNakEff) {
+ dev_info(hsotg->dev, "GINNakEff triggered\n");
+
+ s3c_hsotg_dump(hsotg);
+
+ writel(S3C_DCTL_CGNPInNAK, hsotg->regs + S3C_DCTL);
+ writel(S3C_GINTSTS_GINNakEff, hsotg->regs + S3C_GINTSTS);
+ }
+
+ /* if we've had fifo events, we should try and go around the
+ * loop again to see if there's any point in returning yet. */
+
+ if (gintsts & IRQ_RETRY_MASK && --retry_count > 0)
+ goto irq_retry;
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * s3c_hsotg_ep_enable - enable the given endpoint
+ * @ep: The USB endpint to configure
+ * @desc: The USB endpoint descriptor to configure with.
+ *
+ * This is called from the USB gadget code's usb_ep_enable().
+*/
+static int s3c_hsotg_ep_enable(struct usb_ep *ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+ struct s3c_hsotg *hsotg = hs_ep->parent;
+ unsigned long flags;
+ int index = hs_ep->index;
+ u32 epctrl_reg;
+ u32 epctrl;
+ u32 mps;
+ int dir_in;
+
+ dev_dbg(hsotg->dev,
+ "%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n",
+ __func__, ep->name, desc->bEndpointAddress, desc->bmAttributes,
+ desc->wMaxPacketSize, desc->bInterval);
+
+ /* not to be called for EP0 */
+ WARN_ON(index == 0);
+
+ dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0;
+ if (dir_in != hs_ep->dir_in) {
+ dev_err(hsotg->dev, "%s: direction mismatch!\n", __func__);
+ return -EINVAL;
+ }
+
+ mps = le16_to_cpu(desc->wMaxPacketSize);
+
+ /* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */
+
+ epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
+ epctrl = readl(hsotg->regs + epctrl_reg);
+
+ dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n",
+ __func__, epctrl, epctrl_reg);
+
+ spin_lock_irqsave(&hs_ep->lock, flags);
+
+ epctrl &= ~(S3C_DxEPCTL_EPType_MASK | S3C_DxEPCTL_MPS_MASK);
+ epctrl |= S3C_DxEPCTL_MPS(mps);
+
+ /* mark the endpoint as active, otherwise the core may ignore
+ * transactions entirely for this endpoint */
+ epctrl |= S3C_DxEPCTL_USBActEp;
+
+ /* set the NAK status on the endpoint, otherwise we might try and
+ * do something with data that we've yet got a request to process
+ * since the RXFIFO will take data for an endpoint even if the
+ * size register hasn't been set.
+ */
+
+ epctrl |= S3C_DxEPCTL_SNAK;
+
+ /* update the endpoint state */
+ hs_ep->ep.maxpacket = mps;
+
+ /* default, set to non-periodic */
+ hs_ep->periodic = 0;
+
+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_ISOC:
+ dev_err(hsotg->dev, "no current ISOC support\n");
+ return -EINVAL;
+
+ case USB_ENDPOINT_XFER_BULK:
+ epctrl |= S3C_DxEPCTL_EPType_Bulk;
+ break;
+
+ case USB_ENDPOINT_XFER_INT:
+ if (dir_in) {
+ /* Allocate our TxFNum by simply using the index
+ * of the endpoint for the moment. We could do
+ * something better if the host indicates how
+ * many FIFOs we are expecting to use. */
+
+ hs_ep->periodic = 1;
+ epctrl |= S3C_DxEPCTL_TxFNum(index);
+ }
+
+ epctrl |= S3C_DxEPCTL_EPType_Intterupt;
+ break;
+
+ case USB_ENDPOINT_XFER_CONTROL:
+ epctrl |= S3C_DxEPCTL_EPType_Control;
+ break;
+ }
+
+ /* for non control endpoints, set PID to D0 */
+ if (index)
+ epctrl |= S3C_DxEPCTL_SetD0PID;
+
+ dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n",
+ __func__, epctrl);
+
+ writel(epctrl, hsotg->regs + epctrl_reg);
+ dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x\n",
+ __func__, readl(hsotg->regs + epctrl_reg));
+
+ /* enable the endpoint interrupt */
+ s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
+
+ spin_unlock_irqrestore(&hs_ep->lock, flags);
+ return 0;
+}
+
+static int s3c_hsotg_ep_disable(struct usb_ep *ep)
+{
+ struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+ struct s3c_hsotg *hsotg = hs_ep->parent;
+ int dir_in = hs_ep->dir_in;
+ int index = hs_ep->index;
+ unsigned long flags;
+ u32 epctrl_reg;
+ u32 ctrl;
+
+ dev_info(hsotg->dev, "%s(ep %p)\n", __func__, ep);
+
+ if (ep == &hsotg->eps[0].ep) {
+ dev_err(hsotg->dev, "%s: called for ep0\n", __func__);
+ return -EINVAL;
+ }
+
+ epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
+
+ /* terminate all requests with shutdown */
+ kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false);
+
+ spin_lock_irqsave(&hs_ep->lock, flags);
+
+ ctrl = readl(hsotg->regs + epctrl_reg);
+ ctrl &= ~S3C_DxEPCTL_EPEna;
+ ctrl &= ~S3C_DxEPCTL_USBActEp;
+ ctrl |= S3C_DxEPCTL_SNAK;
+
+ dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
+ writel(ctrl, hsotg->regs + epctrl_reg);
+
+ /* disable endpoint interrupts */
+ s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0);
+
+ spin_unlock_irqrestore(&hs_ep->lock, flags);
+ return 0;
+}
+
+/**
+ * on_list - check request is on the given endpoint
+ * @ep: The endpoint to check.
+ * @test: The request to test if it is on the endpoint.
+*/
+static bool on_list(struct s3c_hsotg_ep *ep, struct s3c_hsotg_req *test)
+{
+ struct s3c_hsotg_req *req, *treq;
+
+ list_for_each_entry_safe(req, treq, &ep->queue, queue) {
+ if (req == test)
+ return true;
+ }
+
+ return false;
+}
+
+static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+ struct s3c_hsotg_req *hs_req = our_req(req);
+ struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+ struct s3c_hsotg *hs = hs_ep->parent;
+ unsigned long flags;
+
+ dev_info(hs->dev, "ep_dequeue(%p,%p)\n", ep, req);
+
+ if (hs_req == hs_ep->req) {
+ dev_dbg(hs->dev, "%s: already in progress\n", __func__);
+ return -EINPROGRESS;
+ }
+
+ spin_lock_irqsave(&hs_ep->lock, flags);
+
+ if (!on_list(hs_ep, hs_req)) {
+ spin_unlock_irqrestore(&hs_ep->lock, flags);
+ return -EINVAL;
+ }
+
+ s3c_hsotg_complete_request(hs, hs_ep, hs_req, -ECONNRESET);
+ spin_unlock_irqrestore(&hs_ep->lock, flags);
+
+ return 0;
+}
+
+static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
+{
+ struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+ struct s3c_hsotg *hs = hs_ep->parent;
+ int index = hs_ep->index;
+ unsigned long irqflags;
+ u32 epreg;
+ u32 epctl;
+
+ dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value);
+
+ spin_lock_irqsave(&hs_ep->lock, irqflags);
+
+ /* write both IN and OUT control registers */
+
+ epreg = S3C_DIEPCTL(index);
+ epctl = readl(hs->regs + epreg);
+
+ if (value)
+ epctl |= S3C_DxEPCTL_Stall;
+ else
+ epctl &= ~S3C_DxEPCTL_Stall;
+
+ writel(epctl, hs->regs + epreg);
+
+ epreg = S3C_DOEPCTL(index);
+ epctl = readl(hs->regs + epreg);
+
+ if (value)
+ epctl |= S3C_DxEPCTL_Stall;
+ else
+ epctl &= ~S3C_DxEPCTL_Stall;
+
+ writel(epctl, hs->regs + epreg);
+
+ spin_unlock_irqrestore(&hs_ep->lock, irqflags);
+
+ return 0;
+}
+
+static struct usb_ep_ops s3c_hsotg_ep_ops = {
+ .enable = s3c_hsotg_ep_enable,
+ .disable = s3c_hsotg_ep_disable,
+ .alloc_request = s3c_hsotg_ep_alloc_request,
+ .free_request = s3c_hsotg_ep_free_request,
+ .queue = s3c_hsotg_ep_queue,
+ .dequeue = s3c_hsotg_ep_dequeue,
+ .set_halt = s3c_hsotg_ep_sethalt,
+ /* note, don't belive we have any call for the fifo routines */
+};
+
+/**
+ * s3c_hsotg_corereset - issue softreset to the core
+ * @hsotg: The device state
+ *
+ * Issue a soft reset to the core, and await the core finishing it.
+*/
+static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
+{
+ int timeout;
+ u32 grstctl;
+
+ dev_dbg(hsotg->dev, "resetting core\n");
+
+ /* issue soft reset */
+ writel(S3C_GRSTCTL_CSftRst, hsotg->regs + S3C_GRSTCTL);
+
+ timeout = 1000;
+ do {
+ grstctl = readl(hsotg->regs + S3C_GRSTCTL);
+ } while (!(grstctl & S3C_GRSTCTL_CSftRst) && timeout-- > 0);
+
+ if (!grstctl & S3C_GRSTCTL_CSftRst) {
+ dev_err(hsotg->dev, "Failed to get CSftRst asserted\n");
+ return -EINVAL;
+ }
+
+ timeout = 1000;
+
+ while (1) {
+ u32 grstctl = readl(hsotg->regs + S3C_GRSTCTL);
+
+ if (timeout-- < 0) {
+ dev_info(hsotg->dev,
+ "%s: reset failed, GRSTCTL=%08x\n",
+ __func__, grstctl);
+ return -ETIMEDOUT;
+ }
+
+ if (grstctl & S3C_GRSTCTL_CSftRst)
+ continue;
+
+ if (!(grstctl & S3C_GRSTCTL_AHBIdle))
+ continue;
+
+ break; /* reset done */
+ }
+
+ dev_dbg(hsotg->dev, "reset successful\n");
+ return 0;
+}
+
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+ struct s3c_hsotg *hsotg = our_hsotg;
+ int ret;
+
+ if (!hsotg) {
+ printk(KERN_ERR "%s: called with no device\n", __func__);
+ return -ENODEV;
+ }
+
+ if (!driver) {
+ dev_err(hsotg->dev, "%s: no driver\n", __func__);
+ return -EINVAL;
+ }
+
+ if (driver->speed != USB_SPEED_HIGH &&
+ driver->speed != USB_SPEED_FULL) {
+ dev_err(hsotg->dev, "%s: bad speed\n", __func__);
+ }
+
+ if (!driver->bind || !driver->setup) {
+ dev_err(hsotg->dev, "%s: missing entry points\n", __func__);
+ return -EINVAL;
+ }
+
+ WARN_ON(hsotg->driver);
+
+ driver->driver.bus = NULL;
+ hsotg->driver = driver;
+ hsotg->gadget.dev.driver = &driver->driver;
+ hsotg->gadget.dev.dma_mask = hsotg->dev->dma_mask;
+ hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+
+ ret = device_add(&hsotg->gadget.dev);
+ if (ret) {
+ dev_err(hsotg->dev, "failed to register gadget device\n");
+ goto err;
+ }
+
+ ret = driver->bind(&hsotg->gadget);
+ if (ret) {
+ dev_err(hsotg->dev, "failed bind %s\n", driver->driver.name);
+
+ hsotg->gadget.dev.driver = NULL;
+ hsotg->driver = NULL;
+ goto err;
+ }
+
+ /* we must now enable ep0 ready for host detection and then
+ * set configuration. */
+
+ s3c_hsotg_corereset(hsotg);
+
+ /* set the PLL on, remove the HNP/SRP and set the PHY */
+ writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) |
+ (0x5 << 10), hsotg->regs + S3C_GUSBCFG);
+
+ /* looks like soft-reset changes state of FIFOs */
+ s3c_hsotg_init_fifo(hsotg);
+
+ __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
+
+ writel(1 << 18 | S3C_DCFG_DevSpd_HS, hsotg->regs + S3C_DCFG);
+
+ writel(S3C_GINTSTS_DisconnInt | S3C_GINTSTS_SessReqInt |
+ S3C_GINTSTS_ConIDStsChng | S3C_GINTSTS_USBRst |
+ S3C_GINTSTS_EnumDone | S3C_GINTSTS_OTGInt |
+ S3C_GINTSTS_USBSusp | S3C_GINTSTS_WkUpInt |
+ S3C_GINTSTS_GOUTNakEff | S3C_GINTSTS_GINNakEff |
+ S3C_GINTSTS_ErlySusp,
+ hsotg->regs + S3C_GINTMSK);
+
+ if (using_dma(hsotg))
+ writel(S3C_GAHBCFG_GlblIntrEn | S3C_GAHBCFG_DMAEn |
+ S3C_GAHBCFG_HBstLen_Incr4,
+ hsotg->regs + S3C_GAHBCFG);
+ else
+ writel(S3C_GAHBCFG_GlblIntrEn, hsotg->regs + S3C_GAHBCFG);
+
+ /* Enabling INTknTXFEmpMsk here seems to be a big mistake, we end
+ * up being flooded with interrupts if the host is polling the
+ * endpoint to try and read data. */
+
+ writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
+ S3C_DIEPMSK_INTknEPMisMsk |
+ S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk,
+ hsotg->regs + S3C_DIEPMSK);
+
+ /* don't need XferCompl, we get that from RXFIFO in slave mode. In
+ * DMA mode we may need this. */
+ writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk |
+ S3C_DOEPMSK_EPDisbldMsk |
+ using_dma(hsotg) ? (S3C_DIEPMSK_XferComplMsk |
+ S3C_DIEPMSK_TimeOUTMsk) : 0,
+ hsotg->regs + S3C_DOEPMSK);
+
+ writel(0, hsotg->regs + S3C_DAINTMSK);
+
+ dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+ readl(hsotg->regs + S3C_DIEPCTL0),
+ readl(hsotg->regs + S3C_DOEPCTL0));
+
+ /* enable in and out endpoint interrupts */
+ s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt);
+
+ /* Enable the RXFIFO when in slave mode, as this is how we collect
+ * the data. In DMA mode, we get events from the FIFO but also
+ * things we cannot process, so do not use it. */
+ if (!using_dma(hsotg))
+ s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_RxFLvl);
+
+ /* Enable interrupts for EP0 in and out */
+ s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1);
+ s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1);
+
+ __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone);
+ udelay(10); /* see openiboot */
+ __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone);
+
+ dev_info(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL));
+
+ /* S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by
+ writing to the EPCTL register.. */
+
+ /* set to read 1 8byte packet */
+ writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) |
+ S3C_DxEPTSIZ_XferSize(8), hsotg->regs + DOEPTSIZ0);
+
+ writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
+ S3C_DxEPCTL_CNAK | S3C_DxEPCTL_EPEna |
+ S3C_DxEPCTL_USBActEp,
+ hsotg->regs + S3C_DOEPCTL0);
+
+ /* enable, but don't activate EP0in */
+ writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
+ S3C_DxEPCTL_USBActEp, hsotg->regs + S3C_DIEPCTL0);
+
+ s3c_hsotg_enqueue_setup(hsotg);
+
+ dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+ readl(hsotg->regs + S3C_DIEPCTL0),
+ readl(hsotg->regs + S3C_DOEPCTL0));
+
+ /* clear global NAKs */
+ writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK,
+ hsotg->regs + S3C_DCTL);
+
+ /* remove the soft-disconnect and let's go */
+ __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
+
+ /* report to the user, and return */
+
+ dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name);
+ return 0;
+
+err:
+ hsotg->driver = NULL;
+ hsotg->gadget.dev.driver = NULL;
+ return ret;
+}
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+ struct s3c_hsotg *hsotg = our_hsotg;
+ int ep;
+
+ if (!hsotg)
+ return -ENODEV;
+
+ if (!driver || driver != hsotg->driver || !driver->unbind)
+ return -EINVAL;
+
+ /* all endpoints should be shutdown */
+ for (ep = 0; ep < S3C_HSOTG_EPS; ep++)
+ s3c_hsotg_ep_disable(&hsotg->eps[ep].ep);
+
+ call_gadget(hsotg, disconnect);
+
+ driver->unbind(&hsotg->gadget);
+ hsotg->driver = NULL;
+ hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+
+ device_del(&hsotg->gadget.dev);
+
+ dev_info(hsotg->dev, "unregistered gadget driver '%s'\n",
+ driver->driver.name);
+
+ return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget)
+{
+ return s3c_hsotg_read_frameno(to_hsotg(gadget));
+}
+
+static struct usb_gadget_ops s3c_hsotg_gadget_ops = {
+ .get_frame = s3c_hsotg_gadget_getframe,
+};
+
+/**
+ * s3c_hsotg_initep - initialise a single endpoint
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint to be initialised.
+ * @epnum: The endpoint number
+ *
+ * Initialise the given endpoint (as part of the probe and device state
+ * creation) to give to the gadget driver. Setup the endpoint name, any
+ * direction information and other state that may be required.
+ */
+static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
+ struct s3c_hsotg_ep *hs_ep,
+ int epnum)
+{
+ u32 ptxfifo;
+ char *dir;
+
+ if (epnum == 0)
+ dir = "";
+ else if ((epnum % 2) == 0) {
+ dir = "out";
+ } else {
+ dir = "in";
+ hs_ep->dir_in = 1;
+ }
+
+ hs_ep->index = epnum;
+
+ snprintf(hs_ep->name, sizeof(hs_ep->name), "ep%d%s", epnum, dir);
+
+ INIT_LIST_HEAD(&hs_ep->queue);
+ INIT_LIST_HEAD(&hs_ep->ep.ep_list);
+
+ spin_lock_init(&hs_ep->lock);
+
+ /* add to the list of endpoints known by the gadget driver */
+ if (epnum)
+ list_add_tail(&hs_ep->ep.ep_list, &hsotg->gadget.ep_list);
+
+ hs_ep->parent = hsotg;
+ hs_ep->ep.name = hs_ep->name;
+ hs_ep->ep.maxpacket = epnum ? 512 : EP0_MPS_LIMIT;
+ hs_ep->ep.ops = &s3c_hsotg_ep_ops;
+
+ /* Read the FIFO size for the Periodic TX FIFO, even if we're
+ * an OUT endpoint, we may as well do this if in future the
+ * code is changed to make each endpoint's direction changeable.
+ */
+
+ ptxfifo = readl(hsotg->regs + S3C_DPTXFSIZn(epnum));
+ hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo);
+
+ /* if we're using dma, we need to set the next-endpoint pointer
+ * to be something valid.
+ */
+
+ if (using_dma(hsotg)) {
+ u32 next = S3C_DxEPCTL_NextEp((epnum + 1) % 15);
+ writel(next, hsotg->regs + S3C_DIEPCTL(epnum));
+ writel(next, hsotg->regs + S3C_DOEPCTL(epnum));
+ }
+}
+
+/**
+ * s3c_hsotg_otgreset - reset the OtG phy block
+ * @hsotg: The host state.
+ *
+ * Power up the phy, set the basic configuration and start the PHY.
+ */
+static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg)
+{
+ u32 osc;
+
+ writel(0, S3C_PHYPWR);
+ mdelay(1);
+
+ osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0;
+
+ writel(osc | 0x10, S3C_PHYCLK);
+
+ /* issue a full set of resets to the otg and core */
+
+ writel(S3C_RSTCON_PHY, S3C_RSTCON);
+ udelay(20); /* at-least 10uS */
+ writel(0, S3C_RSTCON);
+}
+
+
+static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
+{
+ /* unmask subset of endpoint interrupts */
+
+ writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
+ S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk,
+ hsotg->regs + S3C_DIEPMSK);
+
+ writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk |
+ S3C_DOEPMSK_EPDisbldMsk | S3C_DOEPMSK_XferComplMsk,
+ hsotg->regs + S3C_DOEPMSK);
+
+ writel(0, hsotg->regs + S3C_DAINTMSK);
+
+ if (0) {
+ /* post global nak until we're ready */
+ writel(S3C_DCTL_SGNPInNAK | S3C_DCTL_SGOUTNak,
+ hsotg->regs + S3C_DCTL);
+ }
+
+ /* setup fifos */
+
+ dev_info(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
+ readl(hsotg->regs + S3C_GRXFSIZ),
+ readl(hsotg->regs + S3C_GNPTXFSIZ));
+
+ s3c_hsotg_init_fifo(hsotg);
+
+ /* set the PLL on, remove the HNP/SRP and set the PHY */
+ writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) | (0x5 << 10),
+ hsotg->regs + S3C_GUSBCFG);
+
+ writel(using_dma(hsotg) ? S3C_GAHBCFG_DMAEn : 0x0,
+ hsotg->regs + S3C_GAHBCFG);
+}
+
+static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
+{
+ struct device *dev = hsotg->dev;
+ void __iomem *regs = hsotg->regs;
+ u32 val;
+ int idx;
+
+ dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n",
+ readl(regs + S3C_DCFG), readl(regs + S3C_DCTL),
+ readl(regs + S3C_DIEPMSK));
+
+ dev_info(dev, "GAHBCFG=0x%08x, 0x44=0x%08x\n",
+ readl(regs + S3C_GAHBCFG), readl(regs + 0x44));
+
+ dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
+ readl(regs + S3C_GRXFSIZ), readl(regs + S3C_GNPTXFSIZ));
+
+ /* show periodic fifo settings */
+
+ for (idx = 1; idx <= 15; idx++) {
+ val = readl(regs + S3C_DPTXFSIZn(idx));
+ dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx,
+ val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT,
+ val & S3C_DPTXFSIZn_DPTxFStAddr_MASK);
+ }
+
+ for (idx = 0; idx < 15; idx++) {
+ dev_info(dev,
+ "ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx,
+ readl(regs + S3C_DIEPCTL(idx)),
+ readl(regs + S3C_DIEPTSIZ(idx)),
+ readl(regs + S3C_DIEPDMA(idx)));
+
+ val = readl(regs + S3C_DOEPCTL(idx));
+ dev_info(dev,
+ "ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n",
+ idx, readl(regs + S3C_DOEPCTL(idx)),
+ readl(regs + S3C_DOEPTSIZ(idx)),
+ readl(regs + S3C_DOEPDMA(idx)));
+
+ }
+
+ dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n",
+ readl(regs + S3C_DVBUSDIS), readl(regs + S3C_DVBUSPULSE));
+}
+
+
+/**
+ * state_show - debugfs: show overall driver and device state.
+ * @seq: The seq file to write to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows the overall state of the hardware and
+ * some general information about each of the endpoints available
+ * to the system.
+ */
+static int state_show(struct seq_file *seq, void *v)
+{
+ struct s3c_hsotg *hsotg = seq->private;
+ void __iomem *regs = hsotg->regs;
+ int idx;
+
+ seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n",
+ readl(regs + S3C_DCFG),
+ readl(regs + S3C_DCTL),
+ readl(regs + S3C_DSTS));
+
+ seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n",
+ readl(regs + S3C_DIEPMSK), readl(regs + S3C_DOEPMSK));
+
+ seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n",
+ readl(regs + S3C_GINTMSK),
+ readl(regs + S3C_GINTSTS));
+
+ seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n",
+ readl(regs + S3C_DAINTMSK),
+ readl(regs + S3C_DAINT));
+
+ seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n",
+ readl(regs + S3C_GNPTXSTS),
+ readl(regs + S3C_GRXSTSR));
+
+ seq_printf(seq, "\nEndpoint status:\n");
+
+ for (idx = 0; idx < 15; idx++) {
+ u32 in, out;
+
+ in = readl(regs + S3C_DIEPCTL(idx));
+ out = readl(regs + S3C_DOEPCTL(idx));
+
+ seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x",
+ idx, in, out);
+
+ in = readl(regs + S3C_DIEPTSIZ(idx));
+ out = readl(regs + S3C_DOEPTSIZ(idx));
+
+ seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
+ in, out);
+
+ seq_printf(seq, "\n");
+ }
+
+ return 0;
+}
+
+static int state_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, state_show, inode->i_private);
+}
+
+static const struct file_operations state_fops = {
+ .owner = THIS_MODULE,
+ .open = state_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/**
+ * fifo_show - debugfs: show the fifo information
+ * @seq: The seq_file to write data to.
+ * @v: Unused parameter.
+ *
+ * Show the FIFO information for the overall fifo and all the
+ * periodic transmission FIFOs.
+*/
+static int fifo_show(struct seq_file *seq, void *v)
+{
+ struct s3c_hsotg *hsotg = seq->private;
+ void __iomem *regs = hsotg->regs;
+ u32 val;
+ int idx;
+
+ seq_printf(seq, "Non-periodic FIFOs:\n");
+ seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + S3C_GRXFSIZ));
+
+ val = readl(regs + S3C_GNPTXFSIZ);
+ seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n",
+ val >> S3C_GNPTXFSIZ_NPTxFDep_SHIFT,
+ val & S3C_GNPTXFSIZ_NPTxFStAddr_MASK);
+
+ seq_printf(seq, "\nPeriodic TXFIFOs:\n");
+
+ for (idx = 1; idx <= 15; idx++) {
+ val = readl(regs + S3C_DPTXFSIZn(idx));
+
+ seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx,
+ val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT,
+ val & S3C_DPTXFSIZn_DPTxFStAddr_MASK);
+ }
+
+ return 0;
+}
+
+static int fifo_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, fifo_show, inode->i_private);
+}
+
+static const struct file_operations fifo_fops = {
+ .owner = THIS_MODULE,
+ .open = fifo_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+
+static const char *decode_direction(int is_in)
+{
+ return is_in ? "in" : "out";
+}
+
+/**
+ * ep_show - debugfs: show the state of an endpoint.
+ * @seq: The seq_file to write data to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows the state of the given endpoint (one is
+ * registered for each available).
+*/
+static int ep_show(struct seq_file *seq, void *v)
+{
+ struct s3c_hsotg_ep *ep = seq->private;
+ struct s3c_hsotg *hsotg = ep->parent;
+ struct s3c_hsotg_req *req;
+ void __iomem *regs = hsotg->regs;
+ int index = ep->index;
+ int show_limit = 15;
+ unsigned long flags;
+
+ seq_printf(seq, "Endpoint index %d, named %s, dir %s:\n",
+ ep->index, ep->ep.name, decode_direction(ep->dir_in));
+
+ /* first show the register state */
+
+ seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n",
+ readl(regs + S3C_DIEPCTL(index)),
+ readl(regs + S3C_DOEPCTL(index)));
+
+ seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n",
+ readl(regs + S3C_DIEPDMA(index)),
+ readl(regs + S3C_DOEPDMA(index)));
+
+ seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n",
+ readl(regs + S3C_DIEPINT(index)),
+ readl(regs + S3C_DOEPINT(index)));
+
+ seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n",
+ readl(regs + S3C_DIEPTSIZ(index)),
+ readl(regs + S3C_DOEPTSIZ(index)));
+
+ seq_printf(seq, "\n");
+ seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
+ seq_printf(seq, "total_data=%ld\n", ep->total_data);
+
+ seq_printf(seq, "request list (%p,%p):\n",
+ ep->queue.next, ep->queue.prev);
+
+ spin_lock_irqsave(&ep->lock, flags);
+
+ list_for_each_entry(req, &ep->queue, queue) {
+ if (--show_limit < 0) {
+ seq_printf(seq, "not showing more requests...\n");
+ break;
+ }
+
+ seq_printf(seq, "%c req %p: %d bytes @%p, ",
+ req == ep->req ? '*' : ' ',
+ req, req->req.length, req->req.buf);
+ seq_printf(seq, "%d done, res %d\n",
+ req->req.actual, req->req.status);
+ }
+
+ spin_unlock_irqrestore(&ep->lock, flags);
+
+ return 0;
+}
+
+static int ep_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ep_show, inode->i_private);
+}
+
+static const struct file_operations ep_fops = {
+ .owner = THIS_MODULE,
+ .open = ep_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/**
+ * s3c_hsotg_create_debug - create debugfs directory and files
+ * @hsotg: The driver state
+ *
+ * Create the debugfs files to allow the user to get information
+ * about the state of the system. The directory name is created
+ * with the same name as the device itself, in case we end up
+ * with multiple blocks in future systems.
+*/
+static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
+{
+ struct dentry *root;
+ unsigned epidx;
+
+ root = debugfs_create_dir(dev_name(hsotg->dev), NULL);
+ hsotg->debug_root = root;
+ if (IS_ERR(root)) {
+ dev_err(hsotg->dev, "cannot create debug root\n");
+ return;
+ }
+
+ /* create general state file */
+
+ hsotg->debug_file = debugfs_create_file("state", 0444, root,
+ hsotg, &state_fops);
+
+ if (IS_ERR(hsotg->debug_file))
+ dev_err(hsotg->dev, "%s: failed to create state\n", __func__);
+
+ hsotg->debug_fifo = debugfs_create_file("fifo", 0444, root,
+ hsotg, &fifo_fops);
+
+ if (IS_ERR(hsotg->debug_fifo))
+ dev_err(hsotg->dev, "%s: failed to create fifo\n", __func__);
+
+ /* create one file for each endpoint */
+
+ for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) {
+ struct s3c_hsotg_ep *ep = &hsotg->eps[epidx];
+
+ ep->debugfs = debugfs_create_file(ep->name, 0444,
+ root, ep, &ep_fops);
+
+ if (IS_ERR(ep->debugfs))
+ dev_err(hsotg->dev, "failed to create %s debug file\n",
+ ep->name);
+ }
+}
+
+/**
+ * s3c_hsotg_delete_debug - cleanup debugfs entries
+ * @hsotg: The driver state
+ *
+ * Cleanup (remove) the debugfs files for use on module exit.
+*/
+static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
+{
+ unsigned epidx;
+
+ for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) {
+ struct s3c_hsotg_ep *ep = &hsotg->eps[epidx];
+ debugfs_remove(ep->debugfs);
+ }
+
+ debugfs_remove(hsotg->debug_file);
+ debugfs_remove(hsotg->debug_fifo);
+ debugfs_remove(hsotg->debug_root);
+}
+
+/**
+ * s3c_hsotg_gate - set the hardware gate for the block
+ * @pdev: The device we bound to
+ * @on: On or off.
+ *
+ * Set the hardware gate setting into the block. If we end up on
+ * something other than an S3C64XX, then we might need to change this
+ * to using a platform data callback, or some other mechanism.
+ */
+static void s3c_hsotg_gate(struct platform_device *pdev, bool on)
+{
+ unsigned long flags;
+ u32 others;
+
+ local_irq_save(flags);
+
+ others = __raw_readl(S3C64XX_OTHERS);
+ if (on)
+ others |= S3C64XX_OTHERS_USBMASK;
+ else
+ others &= ~S3C64XX_OTHERS_USBMASK;
+ __raw_writel(others, S3C64XX_OTHERS);
+
+ local_irq_restore(flags);
+}
+
+struct s3c_hsotg_plat s3c_hsotg_default_pdata;
+
+static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
+{
+ struct s3c_hsotg_plat *plat = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct s3c_hsotg *hsotg;
+ struct resource *res;
+ int epnum;
+ int ret;
+
+ if (!plat)
+ plat = &s3c_hsotg_default_pdata;
+
+ hsotg = kzalloc(sizeof(struct s3c_hsotg) +
+ sizeof(struct s3c_hsotg_ep) * S3C_HSOTG_EPS,
+ GFP_KERNEL);
+ if (!hsotg) {
+ dev_err(dev, "cannot get memory\n");
+ return -ENOMEM;
+ }
+
+ hsotg->dev = dev;
+ hsotg->plat = plat;
+
+ platform_set_drvdata(pdev, hsotg);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "cannot find register resource 0\n");
+ ret = -EINVAL;
+ goto err_mem;
+ }
+
+ hsotg->regs_res = request_mem_region(res->start, resource_size(res),
+ dev_name(dev));
+ if (!hsotg->regs_res) {
+ dev_err(dev, "cannot reserve registers\n");
+ ret = -ENOENT;
+ goto err_mem;
+ }
+
+ hsotg->regs = ioremap(res->start, resource_size(res));
+ if (!hsotg->regs) {
+ dev_err(dev, "cannot map registers\n");
+ ret = -ENXIO;
+ goto err_regs_res;
+ }
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0) {
+ dev_err(dev, "cannot find IRQ\n");
+ goto err_regs;
+ }
+
+ hsotg->irq = ret;
+
+ ret = request_irq(ret, s3c_hsotg_irq, 0, dev_name(dev), hsotg);
+ if (ret < 0) {
+ dev_err(dev, "cannot claim IRQ\n");
+ goto err_regs;
+ }
+
+ dev_info(dev, "regs %p, irq %d\n", hsotg->regs, hsotg->irq);
+
+ device_initialize(&hsotg->gadget.dev);
+
+ dev_set_name(&hsotg->gadget.dev, "gadget");
+
+ hsotg->gadget.is_dualspeed = 1;
+ hsotg->gadget.ops = &s3c_hsotg_gadget_ops;
+ hsotg->gadget.name = dev_name(dev);
+
+ hsotg->gadget.dev.parent = dev;
+ hsotg->gadget.dev.dma_mask = dev->dma_mask;
+
+ /* setup endpoint information */
+
+ INIT_LIST_HEAD(&hsotg->gadget.ep_list);
+ hsotg->gadget.ep0 = &hsotg->eps[0].ep;
+
+ /* allocate EP0 request */
+
+ hsotg->ctrl_req = s3c_hsotg_ep_alloc_request(&hsotg->eps[0].ep,
+ GFP_KERNEL);
+ if (!hsotg->ctrl_req) {
+ dev_err(dev, "failed to allocate ctrl req\n");
+ goto err_regs;
+ }
+
+ /* reset the system */
+
+ s3c_hsotg_gate(pdev, true);
+
+ s3c_hsotg_otgreset(hsotg);
+ s3c_hsotg_corereset(hsotg);
+ s3c_hsotg_init(hsotg);
+
+ /* initialise the endpoints now the core has been initialised */
+ for (epnum = 0; epnum < S3C_HSOTG_EPS; epnum++)
+ s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum);
+
+ s3c_hsotg_create_debug(hsotg);
+
+ s3c_hsotg_dump(hsotg);
+
+ our_hsotg = hsotg;
+ return 0;
+
+err_regs:
+ iounmap(hsotg->regs);
+
+err_regs_res:
+ release_resource(hsotg->regs_res);
+ kfree(hsotg->regs_res);
+
+err_mem:
+ kfree(hsotg);
+ return ret;
+}
+
+static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
+{
+ struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
+
+ s3c_hsotg_delete_debug(hsotg);
+
+ usb_gadget_unregister_driver(hsotg->driver);
+
+ free_irq(hsotg->irq, hsotg);
+ iounmap(hsotg->regs);
+
+ release_resource(hsotg->regs_res);
+ kfree(hsotg->regs_res);
+
+ s3c_hsotg_gate(pdev, false);
+
+ kfree(hsotg);
+ return 0;
+}
+
+#if 1
+#define s3c_hsotg_suspend NULL
+#define s3c_hsotg_resume NULL
+#endif
+
+static struct platform_driver s3c_hsotg_driver = {
+ .driver = {
+ .name = "s3c-hsotg",
+ .owner = THIS_MODULE,
+ },
+ .probe = s3c_hsotg_probe,
+ .remove = __devexit_p(s3c_hsotg_remove),
+ .suspend = s3c_hsotg_suspend,
+ .resume = s3c_hsotg_resume,
+};
+
+static int __init s3c_hsotg_modinit(void)
+{
+ return platform_driver_register(&s3c_hsotg_driver);
+}
+
+static void __exit s3c_hsotg_modexit(void)
+{
+ platform_driver_unregister(&s3c_hsotg_driver);
+}
+
+module_init(s3c_hsotg_modinit);
+module_exit(s3c_hsotg_modexit);
+
+MODULE_DESCRIPTION("Samsung S3C USB High-speed/OtG device");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c-hsotg");
diff --git a/drivers/usb/gadget/u_audio.c b/drivers/usb/gadget/u_audio.c
new file mode 100644
index 00000000000..0f3d22fc030
--- /dev/null
+++ b/drivers/usb/gadget/u_audio.c
@@ -0,0 +1,319 @@
+/*
+ * u_audio.c -- ALSA audio utilities for Gadget stack
+ *
+ * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ * Copyright (C) 2008 Analog Devices, Inc
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/random.h>
+#include <linux/syscalls.h>
+
+#include "u_audio.h"
+
+/*
+ * This component encapsulates the ALSA devices for USB audio gadget
+ */
+
+#define FILE_PCM_PLAYBACK "/dev/snd/pcmC0D0p"
+#define FILE_PCM_CAPTURE "/dev/snd/pcmC0D0c"
+#define FILE_CONTROL "/dev/snd/controlC0"
+
+static char *fn_play = FILE_PCM_PLAYBACK;
+module_param(fn_play, charp, S_IRUGO);
+MODULE_PARM_DESC(fn_play, "Playback PCM device file name");
+
+static char *fn_cap = FILE_PCM_CAPTURE;
+module_param(fn_cap, charp, S_IRUGO);
+MODULE_PARM_DESC(fn_cap, "Capture PCM device file name");
+
+static char *fn_cntl = FILE_CONTROL;
+module_param(fn_cntl, charp, S_IRUGO);
+MODULE_PARM_DESC(fn_cntl, "Control device file name");
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * Some ALSA internal helper functions
+ */
+static int snd_interval_refine_set(struct snd_interval *i, unsigned int val)
+{
+ struct snd_interval t;
+ t.empty = 0;
+ t.min = t.max = val;
+ t.openmin = t.openmax = 0;
+ t.integer = 1;
+ return snd_interval_refine(i, &t);
+}
+
+static int _snd_pcm_hw_param_set(struct snd_pcm_hw_params *params,
+ snd_pcm_hw_param_t var, unsigned int val,
+ int dir)
+{
+ int changed;
+ if (hw_is_mask(var)) {
+ struct snd_mask *m = hw_param_mask(params, var);
+ if (val == 0 && dir < 0) {
+ changed = -EINVAL;
+ snd_mask_none(m);
+ } else {
+ if (dir > 0)
+ val++;
+ else if (dir < 0)
+ val--;
+ changed = snd_mask_refine_set(
+ hw_param_mask(params, var), val);
+ }
+ } else if (hw_is_interval(var)) {
+ struct snd_interval *i = hw_param_interval(params, var);
+ if (val == 0 && dir < 0) {
+ changed = -EINVAL;
+ snd_interval_none(i);
+ } else if (dir == 0)
+ changed = snd_interval_refine_set(i, val);
+ else {
+ struct snd_interval t;
+ t.openmin = 1;
+ t.openmax = 1;
+ t.empty = 0;
+ t.integer = 0;
+ if (dir < 0) {
+ t.min = val - 1;
+ t.max = val;
+ } else {
+ t.min = val;
+ t.max = val+1;
+ }
+ changed = snd_interval_refine(i, &t);
+ }
+ } else
+ return -EINVAL;
+ if (changed) {
+ params->cmask |= 1 << var;
+ params->rmask |= 1 << var;
+ }
+ return changed;
+}
+/*-------------------------------------------------------------------------*/
+
+/**
+ * Set default hardware params
+ */
+static int playback_default_hw_params(struct gaudio_snd_dev *snd)
+{
+ struct snd_pcm_substream *substream = snd->substream;
+ struct snd_pcm_hw_params *params;
+ snd_pcm_sframes_t result;
+
+ /*
+ * SNDRV_PCM_ACCESS_RW_INTERLEAVED,
+ * SNDRV_PCM_FORMAT_S16_LE
+ * CHANNELS: 2
+ * RATE: 48000
+ */
+ snd->access = SNDRV_PCM_ACCESS_RW_INTERLEAVED;
+ snd->format = SNDRV_PCM_FORMAT_S16_LE;
+ snd->channels = 2;
+ snd->rate = 48000;
+
+ params = kzalloc(sizeof(*params), GFP_KERNEL);
+ if (!params)
+ return -ENOMEM;
+
+ _snd_pcm_hw_params_any(params);
+ _snd_pcm_hw_param_set(params, SNDRV_PCM_HW_PARAM_ACCESS,
+ snd->access, 0);
+ _snd_pcm_hw_param_set(params, SNDRV_PCM_HW_PARAM_FORMAT,
+ snd->format, 0);
+ _snd_pcm_hw_param_set(params, SNDRV_PCM_HW_PARAM_CHANNELS,
+ snd->channels, 0);
+ _snd_pcm_hw_param_set(params, SNDRV_PCM_HW_PARAM_RATE,
+ snd->rate, 0);
+
+ snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL);
+ snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_HW_PARAMS, params);
+
+ result = snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_PREPARE, NULL);
+ if (result < 0) {
+ ERROR(snd->card,
+ "Preparing sound card failed: %d\n", (int)result);
+ kfree(params);
+ return result;
+ }
+
+ /* Store the hardware parameters */
+ snd->access = params_access(params);
+ snd->format = params_format(params);
+ snd->channels = params_channels(params);
+ snd->rate = params_rate(params);
+
+ kfree(params);
+
+ INFO(snd->card,
+ "Hardware params: access %x, format %x, channels %d, rate %d\n",
+ snd->access, snd->format, snd->channels, snd->rate);
+
+ return 0;
+}
+
+/**
+ * Playback audio buffer data by ALSA PCM device
+ */
+static size_t u_audio_playback(struct gaudio *card, void *buf, size_t count)
+{
+ struct gaudio_snd_dev *snd = &card->playback;
+ struct snd_pcm_substream *substream = snd->substream;
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ mm_segment_t old_fs;
+ ssize_t result;
+ snd_pcm_sframes_t frames;
+
+try_again:
+ if (runtime->status->state == SNDRV_PCM_STATE_XRUN ||
+ runtime->status->state == SNDRV_PCM_STATE_SUSPENDED) {
+ result = snd_pcm_kernel_ioctl(substream,
+ SNDRV_PCM_IOCTL_PREPARE, NULL);
+ if (result < 0) {
+ ERROR(card, "Preparing sound card failed: %d\n",
+ (int)result);
+ return result;
+ }
+ }
+
+ frames = bytes_to_frames(runtime, count);
+ old_fs = get_fs();
+ set_fs(KERNEL_DS);
+ result = snd_pcm_lib_write(snd->substream, buf, frames);
+ if (result != frames) {
+ ERROR(card, "Playback error: %d\n", (int)result);
+ set_fs(old_fs);
+ goto try_again;
+ }
+ set_fs(old_fs);
+
+ return 0;
+}
+
+static int u_audio_get_playback_channels(struct gaudio *card)
+{
+ return card->playback.channels;
+}
+
+static int u_audio_get_playback_rate(struct gaudio *card)
+{
+ return card->playback.rate;
+}
+
+/**
+ * Open ALSA PCM and control device files
+ * Initial the PCM or control device
+ */
+static int gaudio_open_snd_dev(struct gaudio *card)
+{
+ struct snd_pcm_file *pcm_file;
+ struct gaudio_snd_dev *snd;
+
+ if (!card)
+ return -ENODEV;
+
+ /* Open control device */
+ snd = &card->control;
+ snd->filp = filp_open(fn_cntl, O_RDWR, 0);
+ if (IS_ERR(snd->filp)) {
+ int ret = PTR_ERR(snd->filp);
+ ERROR(card, "unable to open sound control device file: %s\n",
+ fn_cntl);
+ snd->filp = NULL;
+ return ret;
+ }
+ snd->card = card;
+
+ /* Open PCM playback device and setup substream */
+ snd = &card->playback;
+ snd->filp = filp_open(fn_play, O_WRONLY, 0);
+ if (IS_ERR(snd->filp)) {
+ ERROR(card, "No such PCM playback device: %s\n", fn_play);
+ snd->filp = NULL;
+ }
+ pcm_file = snd->filp->private_data;
+ snd->substream = pcm_file->substream;
+ snd->card = card;
+ playback_default_hw_params(snd);
+
+ /* Open PCM capture device and setup substream */
+ snd = &card->capture;
+ snd->filp = filp_open(fn_cap, O_RDONLY, 0);
+ if (IS_ERR(snd->filp)) {
+ ERROR(card, "No such PCM capture device: %s\n", fn_cap);
+ snd->filp = NULL;
+ }
+ pcm_file = snd->filp->private_data;
+ snd->substream = pcm_file->substream;
+ snd->card = card;
+
+ return 0;
+}
+
+/**
+ * Close ALSA PCM and control device files
+ */
+static int gaudio_close_snd_dev(struct gaudio *gau)
+{
+ struct gaudio_snd_dev *snd;
+
+ /* Close control device */
+ snd = &gau->control;
+ if (!IS_ERR(snd->filp))
+ filp_close(snd->filp, current->files);
+
+ /* Close PCM playback device and setup substream */
+ snd = &gau->playback;
+ if (!IS_ERR(snd->filp))
+ filp_close(snd->filp, current->files);
+
+ /* Close PCM capture device and setup substream */
+ snd = &gau->capture;
+ if (!IS_ERR(snd->filp))
+ filp_close(snd->filp, current->files);
+
+ return 0;
+}
+
+/**
+ * gaudio_setup - setup ALSA interface and preparing for USB transfer
+ *
+ * This sets up PCM, mixer or MIDI ALSA devices fore USB gadget using.
+ *
+ * Returns negative errno, or zero on success
+ */
+int __init gaudio_setup(struct gaudio *card)
+{
+ int ret;
+
+ ret = gaudio_open_snd_dev(card);
+ if (ret)
+ ERROR(card, "we need at least one control device\n");
+
+ return ret;
+
+}
+
+/**
+ * gaudio_cleanup - remove ALSA device interface
+ *
+ * This is called to free all resources allocated by @gaudio_setup().
+ */
+void gaudio_cleanup(struct gaudio *card)
+{
+ if (card)
+ gaudio_close_snd_dev(card);
+}
+
diff --git a/drivers/usb/gadget/u_audio.h b/drivers/usb/gadget/u_audio.h
new file mode 100644
index 00000000000..cc8d159c648
--- /dev/null
+++ b/drivers/usb/gadget/u_audio.h
@@ -0,0 +1,56 @@
+/*
+ * u_audio.h -- interface to USB gadget "ALSA AUDIO" utilities
+ *
+ * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ * Copyright (C) 2008 Analog Devices, Inc
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __U_AUDIO_H
+#define __U_AUDIO_H
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/composite.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#include "gadget_chips.h"
+
+/*
+ * This represents the USB side of an audio card device, managed by a USB
+ * function which provides control and stream interfaces.
+ */
+
+struct gaudio_snd_dev {
+ struct gaudio *card;
+ struct file *filp;
+ struct snd_pcm_substream *substream;
+ int access;
+ int format;
+ int channels;
+ int rate;
+};
+
+struct gaudio {
+ struct usb_function func;
+ struct usb_gadget *gadget;
+
+ /* ALSA sound device interfaces */
+ struct gaudio_snd_dev control;
+ struct gaudio_snd_dev playback;
+ struct gaudio_snd_dev capture;
+
+ /* TODO */
+};
+
+int gaudio_setup(struct gaudio *card);
+void gaudio_cleanup(struct gaudio *card);
+
+#endif /* __U_AUDIO_H */
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 0a4d99ab40d..fc6e709f45b 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -371,6 +371,7 @@ __acquires(&port->port_lock)
req->length = len;
list_del(&req->list);
+ req->zero = (gs_buf_data_avail(&port->port_write_buf) == 0);
pr_vdebug(PREFIX "%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n",
port->port_num, len, *((u8 *)req->buf),
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 845479f7c70..1576a0520ad 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -17,6 +17,26 @@ config USB_C67X00_HCD
To compile this driver as a module, choose M here: the
module will be called c67x00.
+config USB_XHCI_HCD
+ tristate "xHCI HCD (USB 3.0) support (EXPERIMENTAL)"
+ depends on USB && PCI && EXPERIMENTAL
+ ---help---
+ The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
+ "SuperSpeed" host controller hardware.
+
+ To compile this driver as a module, choose M here: the
+ module will be called xhci-hcd.
+
+config USB_XHCI_HCD_DEBUGGING
+ bool "Debugging for the xHCI host controller"
+ depends on USB_XHCI_HCD
+ ---help---
+ Say 'Y' to turn on debugging for the xHCI host controller driver.
+ This will spew debugging output, even in interrupt context.
+ This should only be used for debugging xHCI driver bugs.
+
+ If unsure, say N.
+
config USB_EHCI_HCD
tristate "EHCI HCD (USB 2.0) support"
depends on USB && USB_ARCH_HAS_EHCI
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index f163571e33d..289d748bb41 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -12,6 +12,7 @@ fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \
ifeq ($(CONFIG_FHCI_DEBUG),y)
fhci-objs += fhci-dbg.o
endif
+xhci-objs := xhci-hcd.o xhci-mem.o xhci-pci.o xhci-ring.o xhci-hub.o xhci-dbg.o
obj-$(CONFIG_USB_WHCI_HCD) += whci/
@@ -23,6 +24,7 @@ obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
+obj-$(CONFIG_USB_XHCI_HCD) += xhci.o
obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index bf69f473910..c3a778bd359 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -97,6 +97,7 @@ static const struct hc_driver ehci_au1xxx_hc_driver = {
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 01c3da34f67..bf86809c512 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -309,6 +309,7 @@ static const struct hc_driver ehci_fsl_hc_driver = {
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c637207a1c8..2b72473544d 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1024,6 +1024,51 @@ done:
return;
}
+static void
+ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct ehci_qh *qh;
+ int eptype = usb_endpoint_type(&ep->desc);
+
+ if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
+ return;
+
+ rescan:
+ spin_lock_irq(&ehci->lock);
+ qh = ep->hcpriv;
+
+ /* For Bulk and Interrupt endpoints we maintain the toggle state
+ * in the hardware; the toggle bits in udev aren't used at all.
+ * When an endpoint is reset by usb_clear_halt() we must reset
+ * the toggle bit in the QH.
+ */
+ if (qh) {
+ if (!list_empty(&qh->qtd_list)) {
+ WARN_ONCE(1, "clear_halt for a busy endpoint\n");
+ } else if (qh->qh_state == QH_STATE_IDLE) {
+ qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
+ } else {
+ /* It's not safe to write into the overlay area
+ * while the QH is active. Unlink it first and
+ * wait for the unlink to complete.
+ */
+ if (qh->qh_state == QH_STATE_LINKED) {
+ if (eptype == USB_ENDPOINT_XFER_BULK) {
+ unlink_async(ehci, qh);
+ } else {
+ intr_deschedule(ehci, qh);
+ (void) qh_schedule(ehci, qh);
+ }
+ }
+ spin_unlock_irq(&ehci->lock);
+ schedule_timeout_uninterruptible(1);
+ goto rescan;
+ }
+ }
+ spin_unlock_irq(&ehci->lock);
+}
+
static int ehci_get_frame (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
@@ -1097,7 +1142,7 @@ static int __init ehci_hcd_init(void)
sizeof(struct ehci_itd), sizeof(struct ehci_sitd));
#ifdef DEBUG
- ehci_debug_root = debugfs_create_dir("ehci", NULL);
+ ehci_debug_root = debugfs_create_dir("ehci", usb_debug_root);
if (!ehci_debug_root) {
retval = -ENOENT;
goto err_debug;
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 97a53a48a3d..f46ad27c9a9 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -391,7 +391,7 @@ static inline void create_companion_file(struct ehci_hcd *ehci)
/* with integrated TT there is no companion! */
if (!ehci_is_TDI(ehci))
- i = device_create_file(ehci_to_hcd(ehci)->self.dev,
+ i = device_create_file(ehci_to_hcd(ehci)->self.controller,
&dev_attr_companion);
}
@@ -399,7 +399,7 @@ static inline void remove_companion_file(struct ehci_hcd *ehci)
{
/* with integrated TT there is no companion! */
if (!ehci_is_TDI(ehci))
- device_remove_file(ehci_to_hcd(ehci)->self.dev,
+ device_remove_file(ehci_to_hcd(ehci)->self.controller,
&dev_attr_companion);
}
diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c
index 9c32063a0c2..a44bb4a9495 100644
--- a/drivers/usb/host/ehci-ixp4xx.c
+++ b/drivers/usb/host/ehci-ixp4xx.c
@@ -51,6 +51,7 @@ static const struct hc_driver ixp4xx_ehci_hc_driver = {
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
.get_frame_number = ehci_get_frame,
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 9d487908012..770dd9aba62 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -149,6 +149,7 @@ static const struct hc_driver ehci_orion_hc_driver = {
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
@@ -187,7 +188,7 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
}
}
-static int __init ehci_orion_drv_probe(struct platform_device *pdev)
+static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
{
struct orion_ehci_data *pd = pdev->dev.platform_data;
struct resource *res;
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 5aa8bce90e1..f3683e1da16 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -268,7 +268,7 @@ done:
* Also they depend on separate root hub suspend/resume.
*/
-static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
+static int ehci_pci_suspend(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
unsigned long flags;
@@ -293,12 +293,6 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void)ehci_readl(ehci, &ehci->regs->intr_enable);
- /* make sure snapshot being resumed re-enumerates everything */
- if (message.event == PM_EVENT_PRETHAW) {
- ehci_halt(ehci);
- ehci_reset(ehci);
- }
-
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
bail:
spin_unlock_irqrestore (&ehci->lock, flags);
@@ -309,7 +303,7 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
return rc;
}
-static int ehci_pci_resume(struct usb_hcd *hcd)
+static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
@@ -322,10 +316,12 @@ static int ehci_pci_resume(struct usb_hcd *hcd)
/* Mark hardware accessible again as we are out of D3 state by now */
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- /* If CF is still set, we maintained PCI Vaux power.
+ /* If CF is still set and we aren't resuming from hibernation
+ * then we maintained PCI Vaux power.
* Just undo the effect of ehci_pci_suspend().
*/
- if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
+ if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF &&
+ !hibernated) {
int mask = INTR_MASK;
if (!hcd->self.root_hub->do_remote_wakeup)
@@ -335,7 +331,6 @@ static int ehci_pci_resume(struct usb_hcd *hcd)
return 0;
}
- ehci_dbg(ehci, "lost power, restarting\n");
usb_root_hub_lost_power(hcd->self.root_hub);
/* Else reset, to cope with power loss or flush-to-storage
@@ -393,6 +388,7 @@ static const struct hc_driver ehci_pci_hc_driver = {
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
@@ -429,10 +425,11 @@ static struct pci_driver ehci_pci_driver = {
.probe = usb_hcd_pci_probe,
.remove = usb_hcd_pci_remove,
+ .shutdown = usb_hcd_pci_shutdown,
-#ifdef CONFIG_PM
- .suspend = usb_hcd_pci_suspend,
- .resume = usb_hcd_pci_resume,
+#ifdef CONFIG_PM_SLEEP
+ .driver = {
+ .pm = &usb_hcd_pci_pm_ops
+ },
#endif
- .shutdown = usb_hcd_pci_shutdown,
};
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index ef732b704f5..fbd272288fc 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -61,6 +61,7 @@ static const struct hc_driver ehci_ppc_of_hc_driver = {
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index bb870b8f81b..eecd2a0680a 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -65,6 +65,7 @@ static const struct hc_driver ps3_ehci_hc_driver = {
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
.get_frame_number = ehci_get_frame,
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 1976b1b3778..3192f683f80 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -93,22 +93,6 @@ qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd)
qh->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma);
qh->hw_alt_next = EHCI_LIST_END(ehci);
- /* Except for control endpoints, we make hardware maintain data
- * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
- * and set the pseudo-toggle in udev. Only usb_clear_halt() will
- * ever clear it.
- */
- if (!(qh->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) {
- unsigned is_out, epnum;
-
- is_out = !(qtd->hw_token & cpu_to_hc32(ehci, 1 << 8));
- epnum = (hc32_to_cpup(ehci, &qh->hw_info1) >> 8) & 0x0f;
- if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) {
- qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
- usb_settoggle (qh->dev, epnum, is_out, 1);
- }
- }
-
/* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
wmb ();
qh->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
@@ -850,7 +834,6 @@ done:
qh->qh_state = QH_STATE_IDLE;
qh->hw_info1 = cpu_to_hc32(ehci, info1);
qh->hw_info2 = cpu_to_hc32(ehci, info2);
- usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
qh_refresh (ehci, qh);
return qh;
}
@@ -881,7 +864,7 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
}
}
- /* clear halt and/or toggle; and maybe recover from silicon quirk */
+ /* clear halt and maybe recover from silicon quirk */
if (qh->qh_state == QH_STATE_IDLE)
qh_refresh (ehci, qh);
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 556d0ec0c1f..9d1babc7ff6 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -760,8 +760,10 @@ static int qh_schedule(struct ehci_hcd *ehci, struct ehci_qh *qh)
if (status) {
/* "normal" case, uframing flexible except with splits */
if (qh->period) {
- frame = qh->period - 1;
- do {
+ int i;
+
+ for (i = qh->period; status && i > 0; --i) {
+ frame = ++ehci->random_frame % qh->period;
for (uframe = 0; uframe < 8; uframe++) {
status = check_intr_schedule (ehci,
frame, uframe, qh,
@@ -769,7 +771,7 @@ static int qh_schedule(struct ehci_hcd *ehci, struct ehci_qh *qh)
if (status == 0)
break;
}
- } while (status && frame--);
+ }
/* qh->period == 0 means every uframe */
} else {
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 6cff195e1a3..90ad3395bb2 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -116,6 +116,7 @@ struct ehci_hcd { /* one per controller */
struct timer_list watchdog;
unsigned long actions;
unsigned stamp;
+ unsigned random_frame;
unsigned long next_statechange;
u32 command;
diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c
index ea8a4255c5d..e799f86dab1 100644
--- a/drivers/usb/host/fhci-dbg.c
+++ b/drivers/usb/host/fhci-dbg.c
@@ -108,7 +108,7 @@ void fhci_dfs_create(struct fhci_hcd *fhci)
{
struct device *dev = fhci_to_hcd(fhci)->self.controller;
- fhci->dfs_root = debugfs_create_dir(dev_name(dev), NULL);
+ fhci->dfs_root = debugfs_create_dir(dev_name(dev), usb_debug_root);
if (!fhci->dfs_root) {
WARN_ON(1);
return;
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index cbf30e515f2..88b03214622 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -172,25 +172,6 @@ error_cluster_id_get:
}
-static int hwahc_op_suspend(struct usb_hcd *usb_hcd, pm_message_t msg)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
- dev_err(wusbhc->dev, "%s (%p [%p], 0x%lx) UNIMPLEMENTED\n", __func__,
- usb_hcd, hwahc, *(unsigned long *) &msg);
- return -ENOSYS;
-}
-
-static int hwahc_op_resume(struct usb_hcd *usb_hcd)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
-
- dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
- usb_hcd, hwahc);
- return -ENOSYS;
-}
-
/*
* No need to abort pipes, as when this is called, all the children
* has been disconnected and that has done it [through
@@ -598,8 +579,6 @@ static struct hc_driver hwahc_hc_driver = {
.flags = HCD_USB2, /* FIXME */
.reset = hwahc_op_reset,
.start = hwahc_op_start,
- .pci_suspend = hwahc_op_suspend,
- .pci_resume = hwahc_op_resume,
.stop = hwahc_op_stop,
.get_frame_number = hwahc_op_get_frame_number,
.urb_enqueue = hwahc_op_urb_enqueue,
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index d3269656aa4..811f5dfdc58 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -431,7 +431,7 @@ static struct dentry *ohci_debug_root;
struct debug_buffer {
ssize_t (*fill_func)(struct debug_buffer *); /* fill method */
- struct device *dev;
+ struct ohci_hcd *ohci;
struct mutex mutex; /* protect filling of buffer */
size_t count; /* number of characters filled into buffer */
char *page;
@@ -505,15 +505,11 @@ show_list (struct ohci_hcd *ohci, char *buf, size_t count, struct ed *ed)
static ssize_t fill_async_buffer(struct debug_buffer *buf)
{
- struct usb_bus *bus;
- struct usb_hcd *hcd;
struct ohci_hcd *ohci;
size_t temp;
unsigned long flags;
- bus = dev_get_drvdata(buf->dev);
- hcd = bus_to_hcd(bus);
- ohci = hcd_to_ohci(hcd);
+ ohci = buf->ohci;
/* display control and bulk lists together, for simplicity */
spin_lock_irqsave (&ohci->lock, flags);
@@ -529,8 +525,6 @@ static ssize_t fill_async_buffer(struct debug_buffer *buf)
static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
{
- struct usb_bus *bus;
- struct usb_hcd *hcd;
struct ohci_hcd *ohci;
struct ed **seen, *ed;
unsigned long flags;
@@ -542,9 +536,7 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
return 0;
seen_count = 0;
- bus = (struct usb_bus *)dev_get_drvdata(buf->dev);
- hcd = bus_to_hcd(bus);
- ohci = hcd_to_ohci(hcd);
+ ohci = buf->ohci;
next = buf->page;
size = PAGE_SIZE;
@@ -626,7 +618,6 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
static ssize_t fill_registers_buffer(struct debug_buffer *buf)
{
- struct usb_bus *bus;
struct usb_hcd *hcd;
struct ohci_hcd *ohci;
struct ohci_regs __iomem *regs;
@@ -635,9 +626,8 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
char *next;
u32 rdata;
- bus = (struct usb_bus *)dev_get_drvdata(buf->dev);
- hcd = bus_to_hcd(bus);
- ohci = hcd_to_ohci(hcd);
+ ohci = buf->ohci;
+ hcd = ohci_to_hcd(ohci);
regs = ohci->regs;
next = buf->page;
size = PAGE_SIZE;
@@ -710,7 +700,7 @@ done:
return PAGE_SIZE - size;
}
-static struct debug_buffer *alloc_buffer(struct device *dev,
+static struct debug_buffer *alloc_buffer(struct ohci_hcd *ohci,
ssize_t (*fill_func)(struct debug_buffer *))
{
struct debug_buffer *buf;
@@ -718,7 +708,7 @@ static struct debug_buffer *alloc_buffer(struct device *dev,
buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
if (buf) {
- buf->dev = dev;
+ buf->ohci = ohci;
buf->fill_func = fill_func;
mutex_init(&buf->mutex);
}
@@ -810,26 +800,25 @@ static int debug_registers_open(struct inode *inode, struct file *file)
static inline void create_debug_files (struct ohci_hcd *ohci)
{
struct usb_bus *bus = &ohci_to_hcd(ohci)->self;
- struct device *dev = bus->dev;
ohci->debug_dir = debugfs_create_dir(bus->bus_name, ohci_debug_root);
if (!ohci->debug_dir)
goto dir_error;
ohci->debug_async = debugfs_create_file("async", S_IRUGO,
- ohci->debug_dir, dev,
+ ohci->debug_dir, ohci,
&debug_async_fops);
if (!ohci->debug_async)
goto async_error;
ohci->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
- ohci->debug_dir, dev,
+ ohci->debug_dir, ohci,
&debug_periodic_fops);
if (!ohci->debug_periodic)
goto periodic_error;
ohci->debug_registers = debugfs_create_file("registers", S_IRUGO,
- ohci->debug_dir, dev,
+ ohci->debug_dir, ohci,
&debug_registers_fops);
if (!ohci->debug_registers)
goto registers_error;
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 25db704f3a2..58151687d35 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -571,7 +571,7 @@ static int ohci_init (struct ohci_hcd *ohci)
*/
static int ohci_run (struct ohci_hcd *ohci)
{
- u32 mask, temp;
+ u32 mask, val;
int first = ohci->fminterval == 0;
struct usb_hcd *hcd = ohci_to_hcd(ohci);
@@ -580,8 +580,8 @@ static int ohci_run (struct ohci_hcd *ohci)
/* boot firmware should have set this up (5.1.1.3.1) */
if (first) {
- temp = ohci_readl (ohci, &ohci->regs->fminterval);
- ohci->fminterval = temp & 0x3fff;
+ val = ohci_readl (ohci, &ohci->regs->fminterval);
+ ohci->fminterval = val & 0x3fff;
if (ohci->fminterval != FI)
ohci_dbg (ohci, "fminterval delta %d\n",
ohci->fminterval - FI);
@@ -600,25 +600,25 @@ static int ohci_run (struct ohci_hcd *ohci)
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_OPER:
- temp = 0;
+ val = 0;
break;
case OHCI_USB_SUSPEND:
case OHCI_USB_RESUME:
ohci->hc_control &= OHCI_CTRL_RWC;
ohci->hc_control |= OHCI_USB_RESUME;
- temp = 10 /* msec wait */;
+ val = 10 /* msec wait */;
break;
// case OHCI_USB_RESET:
default:
ohci->hc_control &= OHCI_CTRL_RWC;
ohci->hc_control |= OHCI_USB_RESET;
- temp = 50 /* msec wait */;
+ val = 50 /* msec wait */;
break;
}
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
// flush the writes
(void) ohci_readl (ohci, &ohci->regs->control);
- msleep(temp);
+ msleep(val);
memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
@@ -628,9 +628,9 @@ static int ohci_run (struct ohci_hcd *ohci)
retry:
/* HC Reset requires max 10 us delay */
ohci_writel (ohci, OHCI_HCR, &ohci->regs->cmdstatus);
- temp = 30; /* ... allow extra time */
+ val = 30; /* ... allow extra time */
while ((ohci_readl (ohci, &ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
- if (--temp == 0) {
+ if (--val == 0) {
spin_unlock_irq (&ohci->lock);
ohci_err (ohci, "USB HC reset timed out!\n");
return -1;
@@ -699,23 +699,23 @@ retry:
ohci_writel (ohci, mask, &ohci->regs->intrenable);
/* handle root hub init quirks ... */
- temp = roothub_a (ohci);
- temp &= ~(RH_A_PSM | RH_A_OCPM);
+ val = roothub_a (ohci);
+ val &= ~(RH_A_PSM | RH_A_OCPM);
if (ohci->flags & OHCI_QUIRK_SUPERIO) {
/* NSC 87560 and maybe others */
- temp |= RH_A_NOCP;
- temp &= ~(RH_A_POTPGT | RH_A_NPS);
- ohci_writel (ohci, temp, &ohci->regs->roothub.a);
+ val |= RH_A_NOCP;
+ val &= ~(RH_A_POTPGT | RH_A_NPS);
+ ohci_writel (ohci, val, &ohci->regs->roothub.a);
} else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
(ohci->flags & OHCI_QUIRK_HUB_POWER)) {
/* hub power always on; required for AMD-756 and some
* Mac platforms. ganged overcurrent reporting, if any.
*/
- temp |= RH_A_NPS;
- ohci_writel (ohci, temp, &ohci->regs->roothub.a);
+ val |= RH_A_NPS;
+ ohci_writel (ohci, val, &ohci->regs->roothub.a);
}
ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
- ohci_writel (ohci, (temp & RH_A_NPS) ? 0 : RH_B_PPCM,
+ ohci_writel (ohci, (val & RH_A_NPS) ? 0 : RH_B_PPCM,
&ohci->regs->roothub.b);
// flush those writes
(void) ohci_readl (ohci, &ohci->regs->control);
@@ -724,7 +724,7 @@ retry:
spin_unlock_irq (&ohci->lock);
// POTPGT delay is bits 24-31, in 2 ms units.
- mdelay ((temp >> 23) & 0x1fe);
+ mdelay ((val >> 23) & 0x1fe);
hcd->state = HC_STATE_RUNNING;
if (quirk_zfmicro(ohci)) {
@@ -1105,7 +1105,7 @@ static int __init ohci_hcd_mod_init(void)
set_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
#ifdef DEBUG
- ohci_debug_root = debugfs_create_dir("ohci", NULL);
+ ohci_debug_root = debugfs_create_dir("ohci", usb_debug_root);
if (!ohci_debug_root) {
retval = -ENOENT;
goto error_debug;
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index f9961b4c0da..d2ba04dd785 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -372,7 +372,7 @@ static int __devinit ohci_pci_start (struct usb_hcd *hcd)
#ifdef CONFIG_PM
-static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
+static int ohci_pci_suspend(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
unsigned long flags;
@@ -394,10 +394,6 @@ static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
(void)ohci_readl(ohci, &ohci->regs->intrdisable);
- /* make sure snapshot being resumed re-enumerates everything */
- if (message.event == PM_EVENT_PRETHAW)
- ohci_usb_reset(ohci);
-
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
bail:
spin_unlock_irqrestore (&ohci->lock, flags);
@@ -406,9 +402,14 @@ static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
}
-static int ohci_pci_resume (struct usb_hcd *hcd)
+static int ohci_pci_resume(struct usb_hcd *hcd, bool hibernated)
{
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ /* Make sure resume from hibernation re-enumerates everything */
+ if (hibernated)
+ ohci_usb_reset(hcd_to_ohci(hcd));
+
ohci_finish_controller_resume(hcd);
return 0;
}
@@ -484,12 +485,11 @@ static struct pci_driver ohci_pci_driver = {
.probe = usb_hcd_pci_probe,
.remove = usb_hcd_pci_remove,
+ .shutdown = usb_hcd_pci_shutdown,
-#ifdef CONFIG_PM
- .suspend = usb_hcd_pci_suspend,
- .resume = usb_hcd_pci_resume,
+#ifdef CONFIG_PM_SLEEP
+ .driver = {
+ .pm = &usb_hcd_pci_pm_ops
+ },
#endif
-
- .shutdown = usb_hcd_pci_shutdown,
};
-
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 033c2846ce5..83b5f9cea85 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/acpi.h>
#include "pci-quirks.h"
+#include "xhci-ext-caps.h"
#define UHCI_USBLEGSUP 0xc0 /* legacy support */
@@ -341,7 +342,127 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
return;
}
+/*
+ * handshake - spin reading a register until handshake completes
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @wait_usec: timeout in microseconds
+ * @delay_usec: delay in microseconds to wait between polling
+ *
+ * Polls a register every delay_usec microseconds.
+ * Returns 0 when the mask bits have the value done.
+ * Returns -ETIMEDOUT if this condition is not true after
+ * wait_usec microseconds have passed.
+ */
+static int handshake(void __iomem *ptr, u32 mask, u32 done,
+ int wait_usec, int delay_usec)
+{
+ u32 result;
+
+ do {
+ result = readl(ptr);
+ result &= mask;
+ if (result == done)
+ return 0;
+ udelay(delay_usec);
+ wait_usec -= delay_usec;
+ } while (wait_usec > 0);
+ return -ETIMEDOUT;
+}
+
+/**
+ * PCI Quirks for xHCI.
+ *
+ * Takes care of the handoff between the Pre-OS (i.e. BIOS) and the OS.
+ * It signals to the BIOS that the OS wants control of the host controller,
+ * and then waits 5 seconds for the BIOS to hand over control.
+ * If we timeout, assume the BIOS is broken and take control anyway.
+ */
+static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
+{
+ void __iomem *base;
+ int ext_cap_offset;
+ void __iomem *op_reg_base;
+ u32 val;
+ int timeout;
+
+ if (!mmio_resource_enabled(pdev, 0))
+ return;
+
+ base = ioremap_nocache(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (base == NULL)
+ return;
+ /*
+ * Find the Legacy Support Capability register -
+ * this is optional for xHCI host controllers.
+ */
+ ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET);
+ do {
+ if (!ext_cap_offset)
+ /* We've reached the end of the extended capabilities */
+ goto hc_init;
+ val = readl(base + ext_cap_offset);
+ if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY)
+ break;
+ ext_cap_offset = xhci_find_next_cap_offset(base, ext_cap_offset);
+ } while (1);
+
+ /* If the BIOS owns the HC, signal that the OS wants it, and wait */
+ if (val & XHCI_HC_BIOS_OWNED) {
+ writel(val & XHCI_HC_OS_OWNED, base + ext_cap_offset);
+
+ /* Wait for 5 seconds with 10 microsecond polling interval */
+ timeout = handshake(base + ext_cap_offset, XHCI_HC_BIOS_OWNED,
+ 0, 5000, 10);
+
+ /* Assume a buggy BIOS and take HC ownership anyway */
+ if (timeout) {
+ dev_warn(&pdev->dev, "xHCI BIOS handoff failed"
+ " (BIOS bug ?) %08x\n", val);
+ writel(val & ~XHCI_HC_BIOS_OWNED, base + ext_cap_offset);
+ }
+ }
+
+ /* Disable any BIOS SMIs */
+ writel(XHCI_LEGACY_DISABLE_SMI,
+ base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+
+hc_init:
+ op_reg_base = base + XHCI_HC_LENGTH(readl(base));
+
+ /* Wait for the host controller to be ready before writing any
+ * operational or runtime registers. Wait 5 seconds and no more.
+ */
+ timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_CNR, 0,
+ 5000, 10);
+ /* Assume a buggy HC and start HC initialization anyway */
+ if (timeout) {
+ val = readl(op_reg_base + XHCI_STS_OFFSET);
+ dev_warn(&pdev->dev,
+ "xHCI HW not ready after 5 sec (HC bug?) "
+ "status = 0x%x\n", val);
+ }
+
+ /* Send the halt and disable interrupts command */
+ val = readl(op_reg_base + XHCI_CMD_OFFSET);
+ val &= ~(XHCI_CMD_RUN | XHCI_IRQS);
+ writel(val, op_reg_base + XHCI_CMD_OFFSET);
+
+ /* Wait for the HC to halt - poll every 125 usec (one microframe). */
+ timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_HALT, 1,
+ XHCI_MAX_HALT_USEC, 125);
+ if (timeout) {
+ val = readl(op_reg_base + XHCI_STS_OFFSET);
+ dev_warn(&pdev->dev,
+ "xHCI HW did not halt within %d usec "
+ "status = 0x%x\n", XHCI_MAX_HALT_USEC, val);
+ }
+
+ iounmap(base);
+}
static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
{
@@ -351,5 +472,7 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
quirk_usb_handoff_ohci(pdev);
else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI)
quirk_usb_disable_ehci(pdev);
+ else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
+ quirk_usb_handoff_xhci(pdev);
}
DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index f1626e58c14..56976cc0352 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -46,31 +46,10 @@ MODULE_LICENSE("GPL");
MODULE_AUTHOR("Yoshihiro Shimoda");
MODULE_ALIAS("platform:r8a66597_hcd");
-#define DRIVER_VERSION "10 Apr 2008"
+#define DRIVER_VERSION "2009-05-26"
static const char hcd_name[] = "r8a66597_hcd";
-/* module parameters */
-#if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-static unsigned short clock = XTAL12;
-module_param(clock, ushort, 0644);
-MODULE_PARM_DESC(clock, "input clock: 48MHz=32768, 24MHz=16384, 12MHz=0 "
- "(default=0)");
-#endif
-
-static unsigned short vif = LDRV;
-module_param(vif, ushort, 0644);
-MODULE_PARM_DESC(vif, "input VIF: 3.3V=32768, 1.5V=0(default=32768)");
-
-static unsigned short endian;
-module_param(endian, ushort, 0644);
-MODULE_PARM_DESC(endian, "data endian: big=256, little=0 (default=0)");
-
-static unsigned short irq_sense = 0xff;
-module_param(irq_sense, ushort, 0644);
-MODULE_PARM_DESC(irq_sense, "IRQ sense: low level=32, falling edge=0 "
- "(default=32)");
-
static void packet_write(struct r8a66597 *r8a66597, u16 pipenum);
static int r8a66597_get_frame(struct usb_hcd *hcd);
@@ -136,7 +115,8 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
}
} while ((tmp & USBE) != USBE);
r8a66597_bclr(r8a66597, USBE, SYSCFG0);
- r8a66597_mdfy(r8a66597, clock, XTAL, SYSCFG0);
+ r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata), XTAL,
+ SYSCFG0);
i = 0;
r8a66597_bset(r8a66597, XCKE, SYSCFG0);
@@ -203,6 +183,9 @@ static void r8a66597_disable_port(struct r8a66597 *r8a66597, int port)
static int enable_controller(struct r8a66597 *r8a66597)
{
int ret, port;
+ u16 vif = r8a66597->pdata->vif ? LDRV : 0;
+ u16 irq_sense = r8a66597->irq_sense_low ? INTL : 0;
+ u16 endian = r8a66597->pdata->endian ? BIGEND : 0;
ret = r8a66597_clock_enable(r8a66597);
if (ret < 0)
@@ -2373,7 +2356,7 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev)
return 0;
}
-static int __init r8a66597_probe(struct platform_device *pdev)
+static int __devinit r8a66597_probe(struct platform_device *pdev)
{
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
char clk_name[8];
@@ -2418,6 +2401,12 @@ static int __init r8a66597_probe(struct platform_device *pdev)
goto clean_up;
}
+ if (pdev->dev.platform_data == NULL) {
+ dev_err(&pdev->dev, "no platform data\n");
+ ret = -ENODEV;
+ goto clean_up;
+ }
+
/* initialize hcd */
hcd = usb_create_hcd(&r8a66597_hc_driver, &pdev->dev, (char *)hcd_name);
if (!hcd) {
@@ -2428,6 +2417,8 @@ static int __init r8a66597_probe(struct platform_device *pdev)
r8a66597 = hcd_to_r8a66597(hcd);
memset(r8a66597, 0, sizeof(struct r8a66597));
dev_set_drvdata(&pdev->dev, r8a66597);
+ r8a66597->pdata = pdev->dev.platform_data;
+ r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
@@ -2458,29 +2449,6 @@ static int __init r8a66597_probe(struct platform_device *pdev)
hcd->rsrc_start = res->start;
- /* irq_sense setting on cmdline takes precedence over resource
- * settings, so the introduction of irqflags in IRQ resourse
- * won't disturb existing setups */
- switch (irq_sense) {
- case INTL:
- irq_trigger = IRQF_TRIGGER_LOW;
- break;
- case 0:
- irq_trigger = IRQF_TRIGGER_FALLING;
- break;
- case 0xff:
- if (irq_trigger)
- irq_sense = (irq_trigger & IRQF_TRIGGER_LOW) ?
- INTL : 0;
- else {
- irq_sense = INTL;
- irq_trigger = IRQF_TRIGGER_LOW;
- }
- break;
- default:
- dev_err(&pdev->dev, "Unknown irq_sense value.\n");
- }
-
ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to add hcd\n");
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index f49208f1bb7..d72680b433f 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -30,6 +30,8 @@
#include <linux/clk.h>
#endif
+#include <linux/usb/r8a66597.h>
+
#define SYSCFG0 0x00
#define SYSCFG1 0x02
#define SYSSTS0 0x04
@@ -488,6 +490,7 @@ struct r8a66597 {
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
struct clk *clk;
#endif
+ struct r8a66597_platdata *pdata;
struct r8a66597_device device0;
struct r8a66597_root_hub root_hub[R8A66597_MAX_ROOT_HUB];
struct list_head pipe_queue[R8A66597_MAX_NUM_PIPE];
@@ -506,6 +509,7 @@ struct r8a66597 {
unsigned long child_connect_map[4];
unsigned bus_suspended:1;
+ unsigned irq_sense_low:1;
};
static inline struct r8a66597 *hcd_to_r8a66597(struct usb_hcd *hcd)
@@ -660,10 +664,36 @@ static inline void r8a66597_port_power(struct r8a66597 *r8a66597, int port,
{
unsigned long dvstctr_reg = get_dvstctr_reg(port);
- if (power)
- r8a66597_bset(r8a66597, VBOUT, dvstctr_reg);
- else
- r8a66597_bclr(r8a66597, VBOUT, dvstctr_reg);
+ if (r8a66597->pdata->port_power) {
+ r8a66597->pdata->port_power(port, power);
+ } else {
+ if (power)
+ r8a66597_bset(r8a66597, VBOUT, dvstctr_reg);
+ else
+ r8a66597_bclr(r8a66597, VBOUT, dvstctr_reg);
+ }
+}
+
+static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata)
+{
+ u16 clock = 0;
+
+ switch (pdata->xtal) {
+ case R8A66597_PLATDATA_XTAL_12MHZ:
+ clock = XTAL12;
+ break;
+ case R8A66597_PLATDATA_XTAL_24MHZ:
+ clock = XTAL24;
+ break;
+ case R8A66597_PLATDATA_XTAL_48MHZ:
+ clock = XTAL48;
+ break;
+ default:
+ printk(KERN_ERR "r8a66597: platdata clock is wrong.\n");
+ break;
+ }
+
+ return clock;
}
#define get_pipectr_addr(pipenum) (PIPE1CTR + (pipenum - 1) * 2)
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index cf5e4cf7ea4..274751b4409 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -769,7 +769,7 @@ static int uhci_rh_resume(struct usb_hcd *hcd)
return rc;
}
-static int uhci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
+static int uhci_pci_suspend(struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int rc = 0;
@@ -795,10 +795,6 @@ static int uhci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
/* FIXME: Enable non-PME# remote wakeup? */
- /* make sure snapshot being resumed re-enumerates everything */
- if (message.event == PM_EVENT_PRETHAW)
- uhci_hc_died(uhci);
-
done_okay:
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
done:
@@ -806,7 +802,7 @@ done:
return rc;
}
-static int uhci_pci_resume(struct usb_hcd *hcd)
+static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
@@ -820,6 +816,10 @@ static int uhci_pci_resume(struct usb_hcd *hcd)
spin_lock_irq(&uhci->lock);
+ /* Make sure resume from hibernation re-enumerates everything */
+ if (hibernated)
+ uhci_hc_died(uhci);
+
/* FIXME: Disable non-PME# remote wakeup? */
/* The firmware or a boot kernel may have changed the controller
@@ -940,10 +940,11 @@ static struct pci_driver uhci_pci_driver = {
.remove = usb_hcd_pci_remove,
.shutdown = uhci_shutdown,
-#ifdef CONFIG_PM
- .suspend = usb_hcd_pci_suspend,
- .resume = usb_hcd_pci_resume,
-#endif /* PM */
+#ifdef CONFIG_PM_SLEEP
+ .driver = {
+ .pm = &usb_hcd_pci_pm_ops
+ },
+#endif
};
static int __init uhci_hcd_init(void)
@@ -961,7 +962,7 @@ static int __init uhci_hcd_init(void)
errbuf = kmalloc(ERRBUF_LEN, GFP_KERNEL);
if (!errbuf)
goto errbuf_failed;
- uhci_debugfs_root = debugfs_create_dir("uhci", NULL);
+ uhci_debugfs_root = debugfs_create_dir("uhci", usb_debug_root);
if (!uhci_debugfs_root)
goto debug_failed;
}
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 3e5807d14ff..64e57bfe236 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -260,7 +260,7 @@ static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci,
INIT_LIST_HEAD(&qh->node);
if (udev) { /* Normal QH */
- qh->type = hep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ qh->type = usb_endpoint_type(&hep->desc);
if (qh->type != USB_ENDPOINT_XFER_ISOC) {
qh->dummy_td = uhci_alloc_td(uhci);
if (!qh->dummy_td) {
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
new file mode 100644
index 00000000000..2501c571f85
--- /dev/null
+++ b/drivers/usb/host/xhci-dbg.c
@@ -0,0 +1,485 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "xhci.h"
+
+#define XHCI_INIT_VALUE 0x0
+
+/* Add verbose debugging later, just print everything for now */
+
+void xhci_dbg_regs(struct xhci_hcd *xhci)
+{
+ u32 temp;
+
+ xhci_dbg(xhci, "// xHCI capability registers at %p:\n",
+ xhci->cap_regs);
+ temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
+ xhci_dbg(xhci, "// @%p = 0x%x (CAPLENGTH AND HCIVERSION)\n",
+ &xhci->cap_regs->hc_capbase, temp);
+ xhci_dbg(xhci, "// CAPLENGTH: 0x%x\n",
+ (unsigned int) HC_LENGTH(temp));
+#if 0
+ xhci_dbg(xhci, "// HCIVERSION: 0x%x\n",
+ (unsigned int) HC_VERSION(temp));
+#endif
+
+ xhci_dbg(xhci, "// xHCI operational registers at %p:\n", xhci->op_regs);
+
+ temp = xhci_readl(xhci, &xhci->cap_regs->run_regs_off);
+ xhci_dbg(xhci, "// @%p = 0x%x RTSOFF\n",
+ &xhci->cap_regs->run_regs_off,
+ (unsigned int) temp & RTSOFF_MASK);
+ xhci_dbg(xhci, "// xHCI runtime registers at %p:\n", xhci->run_regs);
+
+ temp = xhci_readl(xhci, &xhci->cap_regs->db_off);
+ xhci_dbg(xhci, "// @%p = 0x%x DBOFF\n", &xhci->cap_regs->db_off, temp);
+ xhci_dbg(xhci, "// Doorbell array at %p:\n", xhci->dba);
+}
+
+static void xhci_print_cap_regs(struct xhci_hcd *xhci)
+{
+ u32 temp;
+
+ xhci_dbg(xhci, "xHCI capability registers at %p:\n", xhci->cap_regs);
+
+ temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
+ xhci_dbg(xhci, "CAPLENGTH AND HCIVERSION 0x%x:\n",
+ (unsigned int) temp);
+ xhci_dbg(xhci, "CAPLENGTH: 0x%x\n",
+ (unsigned int) HC_LENGTH(temp));
+ xhci_dbg(xhci, "HCIVERSION: 0x%x\n",
+ (unsigned int) HC_VERSION(temp));
+
+ temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
+ xhci_dbg(xhci, "HCSPARAMS 1: 0x%x\n",
+ (unsigned int) temp);
+ xhci_dbg(xhci, " Max device slots: %u\n",
+ (unsigned int) HCS_MAX_SLOTS(temp));
+ xhci_dbg(xhci, " Max interrupters: %u\n",
+ (unsigned int) HCS_MAX_INTRS(temp));
+ xhci_dbg(xhci, " Max ports: %u\n",
+ (unsigned int) HCS_MAX_PORTS(temp));
+
+ temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
+ xhci_dbg(xhci, "HCSPARAMS 2: 0x%x\n",
+ (unsigned int) temp);
+ xhci_dbg(xhci, " Isoc scheduling threshold: %u\n",
+ (unsigned int) HCS_IST(temp));
+ xhci_dbg(xhci, " Maximum allowed segments in event ring: %u\n",
+ (unsigned int) HCS_ERST_MAX(temp));
+
+ temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
+ xhci_dbg(xhci, "HCSPARAMS 3 0x%x:\n",
+ (unsigned int) temp);
+ xhci_dbg(xhci, " Worst case U1 device exit latency: %u\n",
+ (unsigned int) HCS_U1_LATENCY(temp));
+ xhci_dbg(xhci, " Worst case U2 device exit latency: %u\n",
+ (unsigned int) HCS_U2_LATENCY(temp));
+
+ temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+ xhci_dbg(xhci, "HCC PARAMS 0x%x:\n", (unsigned int) temp);
+ xhci_dbg(xhci, " HC generates %s bit addresses\n",
+ HCC_64BIT_ADDR(temp) ? "64" : "32");
+ /* FIXME */
+ xhci_dbg(xhci, " FIXME: more HCCPARAMS debugging\n");
+
+ temp = xhci_readl(xhci, &xhci->cap_regs->run_regs_off);
+ xhci_dbg(xhci, "RTSOFF 0x%x:\n", temp & RTSOFF_MASK);
+}
+
+static void xhci_print_command_reg(struct xhci_hcd *xhci)
+{
+ u32 temp;
+
+ temp = xhci_readl(xhci, &xhci->op_regs->command);
+ xhci_dbg(xhci, "USBCMD 0x%x:\n", temp);
+ xhci_dbg(xhci, " HC is %s\n",
+ (temp & CMD_RUN) ? "running" : "being stopped");
+ xhci_dbg(xhci, " HC has %sfinished hard reset\n",
+ (temp & CMD_RESET) ? "not " : "");
+ xhci_dbg(xhci, " Event Interrupts %s\n",
+ (temp & CMD_EIE) ? "enabled " : "disabled");
+ xhci_dbg(xhci, " Host System Error Interrupts %s\n",
+ (temp & CMD_EIE) ? "enabled " : "disabled");
+ xhci_dbg(xhci, " HC has %sfinished light reset\n",
+ (temp & CMD_LRESET) ? "not " : "");
+}
+
+static void xhci_print_status(struct xhci_hcd *xhci)
+{
+ u32 temp;
+
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ xhci_dbg(xhci, "USBSTS 0x%x:\n", temp);
+ xhci_dbg(xhci, " Event ring is %sempty\n",
+ (temp & STS_EINT) ? "not " : "");
+ xhci_dbg(xhci, " %sHost System Error\n",
+ (temp & STS_FATAL) ? "WARNING: " : "No ");
+ xhci_dbg(xhci, " HC is %s\n",
+ (temp & STS_HALT) ? "halted" : "running");
+}
+
+static void xhci_print_op_regs(struct xhci_hcd *xhci)
+{
+ xhci_dbg(xhci, "xHCI operational registers at %p:\n", xhci->op_regs);
+ xhci_print_command_reg(xhci);
+ xhci_print_status(xhci);
+}
+
+static void xhci_print_ports(struct xhci_hcd *xhci)
+{
+ u32 __iomem *addr;
+ int i, j;
+ int ports;
+ char *names[NUM_PORT_REGS] = {
+ "status",
+ "power",
+ "link",
+ "reserved",
+ };
+
+ ports = HCS_MAX_PORTS(xhci->hcs_params1);
+ addr = &xhci->op_regs->port_status_base;
+ for (i = 0; i < ports; i++) {
+ for (j = 0; j < NUM_PORT_REGS; ++j) {
+ xhci_dbg(xhci, "%p port %s reg = 0x%x\n",
+ addr, names[j],
+ (unsigned int) xhci_readl(xhci, addr));
+ addr++;
+ }
+ }
+}
+
+void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num)
+{
+ void *addr;
+ u32 temp;
+
+ addr = &ir_set->irq_pending;
+ temp = xhci_readl(xhci, addr);
+ if (temp == XHCI_INIT_VALUE)
+ return;
+
+ xhci_dbg(xhci, " %p: ir_set[%i]\n", ir_set, set_num);
+
+ xhci_dbg(xhci, " %p: ir_set.pending = 0x%x\n", addr,
+ (unsigned int)temp);
+
+ addr = &ir_set->irq_control;
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.control = 0x%x\n", addr,
+ (unsigned int)temp);
+
+ addr = &ir_set->erst_size;
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.erst_size = 0x%x\n", addr,
+ (unsigned int)temp);
+
+ addr = &ir_set->rsvd;
+ temp = xhci_readl(xhci, addr);
+ if (temp != XHCI_INIT_VALUE)
+ xhci_dbg(xhci, " WARN: %p: ir_set.rsvd = 0x%x\n",
+ addr, (unsigned int)temp);
+
+ addr = &ir_set->erst_base[0];
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.erst_base[0] = 0x%x\n",
+ addr, (unsigned int) temp);
+
+ addr = &ir_set->erst_base[1];
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.erst_base[1] = 0x%x\n",
+ addr, (unsigned int) temp);
+
+ addr = &ir_set->erst_dequeue[0];
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.erst_dequeue[0] = 0x%x\n",
+ addr, (unsigned int) temp);
+
+ addr = &ir_set->erst_dequeue[1];
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.erst_dequeue[1] = 0x%x\n",
+ addr, (unsigned int) temp);
+}
+
+void xhci_print_run_regs(struct xhci_hcd *xhci)
+{
+ u32 temp;
+ int i;
+
+ xhci_dbg(xhci, "xHCI runtime registers at %p:\n", xhci->run_regs);
+ temp = xhci_readl(xhci, &xhci->run_regs->microframe_index);
+ xhci_dbg(xhci, " %p: Microframe index = 0x%x\n",
+ &xhci->run_regs->microframe_index,
+ (unsigned int) temp);
+ for (i = 0; i < 7; ++i) {
+ temp = xhci_readl(xhci, &xhci->run_regs->rsvd[i]);
+ if (temp != XHCI_INIT_VALUE)
+ xhci_dbg(xhci, " WARN: %p: Rsvd[%i] = 0x%x\n",
+ &xhci->run_regs->rsvd[i],
+ i, (unsigned int) temp);
+ }
+}
+
+void xhci_print_registers(struct xhci_hcd *xhci)
+{
+ xhci_print_cap_regs(xhci);
+ xhci_print_op_regs(xhci);
+ xhci_print_ports(xhci);
+}
+
+void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb)
+{
+ int i;
+ for (i = 0; i < 4; ++i)
+ xhci_dbg(xhci, "Offset 0x%x = 0x%x\n",
+ i*4, trb->generic.field[i]);
+}
+
+/**
+ * Debug a transfer request block (TRB).
+ */
+void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
+{
+ u64 address;
+ u32 type = xhci_readl(xhci, &trb->link.control) & TRB_TYPE_BITMASK;
+
+ switch (type) {
+ case TRB_TYPE(TRB_LINK):
+ xhci_dbg(xhci, "Link TRB:\n");
+ xhci_print_trb_offsets(xhci, trb);
+
+ address = trb->link.segment_ptr[0] +
+ (((u64) trb->link.segment_ptr[1]) << 32);
+ xhci_dbg(xhci, "Next ring segment DMA address = 0x%llx\n", address);
+
+ xhci_dbg(xhci, "Interrupter target = 0x%x\n",
+ GET_INTR_TARGET(trb->link.intr_target));
+ xhci_dbg(xhci, "Cycle bit = %u\n",
+ (unsigned int) (trb->link.control & TRB_CYCLE));
+ xhci_dbg(xhci, "Toggle cycle bit = %u\n",
+ (unsigned int) (trb->link.control & LINK_TOGGLE));
+ xhci_dbg(xhci, "No Snoop bit = %u\n",
+ (unsigned int) (trb->link.control & TRB_NO_SNOOP));
+ break;
+ case TRB_TYPE(TRB_TRANSFER):
+ address = trb->trans_event.buffer[0] +
+ (((u64) trb->trans_event.buffer[1]) << 32);
+ /*
+ * FIXME: look at flags to figure out if it's an address or if
+ * the data is directly in the buffer field.
+ */
+ xhci_dbg(xhci, "DMA address or buffer contents= %llu\n", address);
+ break;
+ case TRB_TYPE(TRB_COMPLETION):
+ address = trb->event_cmd.cmd_trb[0] +
+ (((u64) trb->event_cmd.cmd_trb[1]) << 32);
+ xhci_dbg(xhci, "Command TRB pointer = %llu\n", address);
+ xhci_dbg(xhci, "Completion status = %u\n",
+ (unsigned int) GET_COMP_CODE(trb->event_cmd.status));
+ xhci_dbg(xhci, "Flags = 0x%x\n", (unsigned int) trb->event_cmd.flags);
+ break;
+ default:
+ xhci_dbg(xhci, "Unknown TRB with TRB type ID %u\n",
+ (unsigned int) type>>10);
+ xhci_print_trb_offsets(xhci, trb);
+ break;
+ }
+}
+
+/**
+ * Debug a segment with an xHCI ring.
+ *
+ * @return The Link TRB of the segment, or NULL if there is no Link TRB
+ * (which is a bug, since all segments must have a Link TRB).
+ *
+ * Prints out all TRBs in the segment, even those after the Link TRB.
+ *
+ * XXX: should we print out TRBs that the HC owns? As long as we don't
+ * write, that should be fine... We shouldn't expect that the memory pointed to
+ * by the TRB is valid at all. Do we care about ones the HC owns? Probably,
+ * for HC debugging.
+ */
+void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg)
+{
+ int i;
+ u32 addr = (u32) seg->dma;
+ union xhci_trb *trb = seg->trbs;
+
+ for (i = 0; i < TRBS_PER_SEGMENT; ++i) {
+ trb = &seg->trbs[i];
+ xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n", addr,
+ (unsigned int) trb->link.segment_ptr[0],
+ (unsigned int) trb->link.segment_ptr[1],
+ (unsigned int) trb->link.intr_target,
+ (unsigned int) trb->link.control);
+ addr += sizeof(*trb);
+ }
+}
+
+void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring)
+{
+ xhci_dbg(xhci, "Ring deq = %p (virt), 0x%llx (dma)\n",
+ ring->dequeue,
+ (unsigned long long)xhci_trb_virt_to_dma(ring->deq_seg,
+ ring->dequeue));
+ xhci_dbg(xhci, "Ring deq updated %u times\n",
+ ring->deq_updates);
+ xhci_dbg(xhci, "Ring enq = %p (virt), 0x%llx (dma)\n",
+ ring->enqueue,
+ (unsigned long long)xhci_trb_virt_to_dma(ring->enq_seg,
+ ring->enqueue));
+ xhci_dbg(xhci, "Ring enq updated %u times\n",
+ ring->enq_updates);
+}
+
+/**
+ * Debugging for an xHCI ring, which is a queue broken into multiple segments.
+ *
+ * Print out each segment in the ring. Check that the DMA address in
+ * each link segment actually matches the segment's stored DMA address.
+ * Check that the link end bit is only set at the end of the ring.
+ * Check that the dequeue and enqueue pointers point to real data in this ring
+ * (not some other ring).
+ */
+void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring)
+{
+ /* FIXME: Throw an error if any segment doesn't have a Link TRB */
+ struct xhci_segment *seg;
+ struct xhci_segment *first_seg = ring->first_seg;
+ xhci_debug_segment(xhci, first_seg);
+
+ if (!ring->enq_updates && !ring->deq_updates) {
+ xhci_dbg(xhci, " Ring has not been updated\n");
+ return;
+ }
+ for (seg = first_seg->next; seg != first_seg; seg = seg->next)
+ xhci_debug_segment(xhci, seg);
+}
+
+void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst)
+{
+ u32 addr = (u32) erst->erst_dma_addr;
+ int i;
+ struct xhci_erst_entry *entry;
+
+ for (i = 0; i < erst->num_entries; ++i) {
+ entry = &erst->entries[i];
+ xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n",
+ (unsigned int) addr,
+ (unsigned int) entry->seg_addr[0],
+ (unsigned int) entry->seg_addr[1],
+ (unsigned int) entry->seg_size,
+ (unsigned int) entry->rsvd);
+ addr += sizeof(*entry);
+ }
+}
+
+void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci)
+{
+ u32 val;
+
+ val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
+ xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = 0x%x\n", val);
+ val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[1]);
+ xhci_dbg(xhci, "// xHC command ring deq ptr high bits = 0x%x\n", val);
+}
+
+void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep)
+{
+ int i, j;
+ int last_ep_ctx = 31;
+ /* Fields are 32 bits wide, DMA addresses are in bytes */
+ int field_size = 32 / 8;
+
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n",
+ &ctx->drop_flags, (unsigned long long)dma,
+ ctx->drop_flags);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n",
+ &ctx->add_flags, (unsigned long long)dma,
+ ctx->add_flags);
+ dma += field_size;
+ for (i = 0; i > 6; ++i) {
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
+ &ctx->rsvd[i], (unsigned long long)dma,
+ ctx->rsvd[i], i);
+ dma += field_size;
+ }
+
+ xhci_dbg(xhci, "Slot Context:\n");
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info\n",
+ &ctx->slot.dev_info,
+ (unsigned long long)dma, ctx->slot.dev_info);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info2\n",
+ &ctx->slot.dev_info2,
+ (unsigned long long)dma, ctx->slot.dev_info2);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tt_info\n",
+ &ctx->slot.tt_info,
+ (unsigned long long)dma, ctx->slot.tt_info);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_state\n",
+ &ctx->slot.dev_state,
+ (unsigned long long)dma, ctx->slot.dev_state);
+ dma += field_size;
+ for (i = 0; i > 4; ++i) {
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
+ &ctx->slot.reserved[i], (unsigned long long)dma,
+ ctx->slot.reserved[i], i);
+ dma += field_size;
+ }
+
+ if (last_ep < 31)
+ last_ep_ctx = last_ep + 1;
+ for (i = 0; i < last_ep_ctx; ++i) {
+ xhci_dbg(xhci, "Endpoint %02d Context:\n", i);
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n",
+ &ctx->ep[i].ep_info,
+ (unsigned long long)dma, ctx->ep[i].ep_info);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info2\n",
+ &ctx->ep[i].ep_info2,
+ (unsigned long long)dma, ctx->ep[i].ep_info2);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[0]\n",
+ &ctx->ep[i].deq[0],
+ (unsigned long long)dma, ctx->ep[i].deq[0]);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[1]\n",
+ &ctx->ep[i].deq[1],
+ (unsigned long long)dma, ctx->ep[i].deq[1]);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tx_info\n",
+ &ctx->ep[i].tx_info,
+ (unsigned long long)dma, ctx->ep[i].tx_info);
+ dma += field_size;
+ for (j = 0; j < 3; ++j) {
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
+ &ctx->ep[i].reserved[j],
+ (unsigned long long)dma,
+ ctx->ep[i].reserved[j], j);
+ dma += field_size;
+ }
+ }
+}
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
new file mode 100644
index 00000000000..ecc131c3fe3
--- /dev/null
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -0,0 +1,145 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+/* Up to 16 microframes to halt an HC - one microframe is 125 microsectonds */
+#define XHCI_MAX_HALT_USEC (16*125)
+/* HC not running - set to 1 when run/stop bit is cleared. */
+#define XHCI_STS_HALT (1<<0)
+
+/* HCCPARAMS offset from PCI base address */
+#define XHCI_HCC_PARAMS_OFFSET 0x10
+/* HCCPARAMS contains the first extended capability pointer */
+#define XHCI_HCC_EXT_CAPS(p) (((p)>>16)&0xffff)
+
+/* Command and Status registers offset from the Operational Registers address */
+#define XHCI_CMD_OFFSET 0x00
+#define XHCI_STS_OFFSET 0x04
+
+#define XHCI_MAX_EXT_CAPS 50
+
+/* Capability Register */
+/* bits 7:0 - how long is the Capabilities register */
+#define XHCI_HC_LENGTH(p) (((p)>>00)&0x00ff)
+
+/* Extended capability register fields */
+#define XHCI_EXT_CAPS_ID(p) (((p)>>0)&0xff)
+#define XHCI_EXT_CAPS_NEXT(p) (((p)>>8)&0xff)
+#define XHCI_EXT_CAPS_VAL(p) ((p)>>16)
+/* Extended capability IDs - ID 0 reserved */
+#define XHCI_EXT_CAPS_LEGACY 1
+#define XHCI_EXT_CAPS_PROTOCOL 2
+#define XHCI_EXT_CAPS_PM 3
+#define XHCI_EXT_CAPS_VIRT 4
+#define XHCI_EXT_CAPS_ROUTE 5
+/* IDs 6-9 reserved */
+#define XHCI_EXT_CAPS_DEBUG 10
+/* USB Legacy Support Capability - section 7.1.1 */
+#define XHCI_HC_BIOS_OWNED (1 << 16)
+#define XHCI_HC_OS_OWNED (1 << 24)
+
+/* USB Legacy Support Capability - section 7.1.1 */
+/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
+#define XHCI_LEGACY_SUPPORT_OFFSET (0x00)
+
+/* USB Legacy Support Control and Status Register - section 7.1.2 */
+/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
+#define XHCI_LEGACY_CONTROL_OFFSET (0x04)
+/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
+#define XHCI_LEGACY_DISABLE_SMI ((0x3 << 1) + (0xff << 5) + (0x7 << 17))
+
+/* command register values to disable interrupts and halt the HC */
+/* start/stop HC execution - do not write unless HC is halted*/
+#define XHCI_CMD_RUN (1 << 0)
+/* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */
+#define XHCI_CMD_EIE (1 << 2)
+/* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */
+#define XHCI_CMD_HSEIE (1 << 3)
+/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
+#define XHCI_CMD_EWE (1 << 10)
+
+#define XHCI_IRQS (XHCI_CMD_EIE | XHCI_CMD_HSEIE | XHCI_CMD_EWE)
+
+/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
+#define XHCI_STS_CNR (1 << 11)
+
+#include <linux/io.h>
+
+/**
+ * Return the next extended capability pointer register.
+ *
+ * @base PCI register base address.
+ *
+ * @ext_offset Offset of the 32-bit register that contains the extended
+ * capabilites pointer. If searching for the first extended capability, pass
+ * in XHCI_HCC_PARAMS_OFFSET. If searching for the next extended capability,
+ * pass in the offset of the current extended capability register.
+ *
+ * Returns 0 if there is no next extended capability register or returns the register offset
+ * from the PCI registers base address.
+ */
+static inline int xhci_find_next_cap_offset(void __iomem *base, int ext_offset)
+{
+ u32 next;
+
+ next = readl(base + ext_offset);
+
+ if (ext_offset == XHCI_HCC_PARAMS_OFFSET)
+ /* Find the first extended capability */
+ next = XHCI_HCC_EXT_CAPS(next);
+ else
+ /* Find the next extended capability */
+ next = XHCI_EXT_CAPS_NEXT(next);
+ if (!next)
+ return 0;
+ /*
+ * Address calculation from offset of extended capabilities
+ * (or HCCPARAMS) register - see section 5.3.6 and section 7.
+ */
+ return ext_offset + (next << 2);
+}
+
+/**
+ * Find the offset of the extended capabilities with capability ID id.
+ *
+ * @base PCI MMIO registers base address.
+ * @ext_offset Offset from base of the first extended capability to look at,
+ * or the address of HCCPARAMS.
+ * @id Extended capability ID to search for.
+ *
+ * This uses an arbitrary limit of XHCI_MAX_EXT_CAPS extended capabilities
+ * to make sure that the list doesn't contain a loop.
+ */
+static inline int xhci_find_ext_cap_by_id(void __iomem *base, int ext_offset, int id)
+{
+ u32 val;
+ int limit = XHCI_MAX_EXT_CAPS;
+
+ while (ext_offset && limit > 0) {
+ val = readl(base + ext_offset);
+ if (XHCI_EXT_CAPS_ID(val) == id)
+ break;
+ ext_offset = xhci_find_next_cap_offset(base, ext_offset);
+ limit--;
+ }
+ if (limit > 0)
+ return ext_offset;
+ return 0;
+}
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c
new file mode 100644
index 00000000000..dba3e07ccd0
--- /dev/null
+++ b/drivers/usb/host/xhci-hcd.c
@@ -0,0 +1,1274 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/irq.h>
+#include <linux/module.h>
+
+#include "xhci.h"
+
+#define DRIVER_AUTHOR "Sarah Sharp"
+#define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
+
+/* TODO: copied from ehci-hcd.c - can this be refactored? */
+/*
+ * handshake - spin reading hc until handshake completes or fails
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @usec: timeout in microseconds
+ *
+ * Returns negative errno, or zero on success
+ *
+ * Success happens when the "mask" bits have the specified value (hardware
+ * handshake done). There are two failure modes: "usec" have passed (major
+ * hardware flakeout), or the register reads as all-ones (hardware removed).
+ */
+static int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+ u32 mask, u32 done, int usec)
+{
+ u32 result;
+
+ do {
+ result = xhci_readl(xhci, ptr);
+ if (result == ~(u32)0) /* card removed */
+ return -ENODEV;
+ result &= mask;
+ if (result == done)
+ return 0;
+ udelay(1);
+ usec--;
+ } while (usec > 0);
+ return -ETIMEDOUT;
+}
+
+/*
+ * Force HC into halt state.
+ *
+ * Disable any IRQs and clear the run/stop bit.
+ * HC will complete any current and actively pipelined transactions, and
+ * should halt within 16 microframes of the run/stop bit being cleared.
+ * Read HC Halted bit in the status register to see when the HC is finished.
+ * XXX: shouldn't we set HC_STATE_HALT here somewhere?
+ */
+int xhci_halt(struct xhci_hcd *xhci)
+{
+ u32 halted;
+ u32 cmd;
+ u32 mask;
+
+ xhci_dbg(xhci, "// Halt the HC\n");
+ /* Disable all interrupts from the host controller */
+ mask = ~(XHCI_IRQS);
+ halted = xhci_readl(xhci, &xhci->op_regs->status) & STS_HALT;
+ if (!halted)
+ mask &= ~CMD_RUN;
+
+ cmd = xhci_readl(xhci, &xhci->op_regs->command);
+ cmd &= mask;
+ xhci_writel(xhci, cmd, &xhci->op_regs->command);
+
+ return handshake(xhci, &xhci->op_regs->status,
+ STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
+}
+
+/*
+ * Reset a halted HC, and set the internal HC state to HC_STATE_HALT.
+ *
+ * This resets pipelines, timers, counters, state machines, etc.
+ * Transactions will be terminated immediately, and operational registers
+ * will be set to their defaults.
+ */
+int xhci_reset(struct xhci_hcd *xhci)
+{
+ u32 command;
+ u32 state;
+
+ state = xhci_readl(xhci, &xhci->op_regs->status);
+ BUG_ON((state & STS_HALT) == 0);
+
+ xhci_dbg(xhci, "// Reset the HC\n");
+ command = xhci_readl(xhci, &xhci->op_regs->command);
+ command |= CMD_RESET;
+ xhci_writel(xhci, command, &xhci->op_regs->command);
+ /* XXX: Why does EHCI set this here? Shouldn't other code do this? */
+ xhci_to_hcd(xhci)->state = HC_STATE_HALT;
+
+ return handshake(xhci, &xhci->op_regs->command, CMD_RESET, 0, 250 * 1000);
+}
+
+/*
+ * Stop the HC from processing the endpoint queues.
+ */
+static void xhci_quiesce(struct xhci_hcd *xhci)
+{
+ /*
+ * Queues are per endpoint, so we need to disable an endpoint or slot.
+ *
+ * To disable a slot, we need to insert a disable slot command on the
+ * command ring and ring the doorbell. This will also free any internal
+ * resources associated with the slot (which might not be what we want).
+ *
+ * A Release Endpoint command sounds better - doesn't free internal HC
+ * memory, but removes the endpoints from the schedule and releases the
+ * bandwidth, disables the doorbells, and clears the endpoint enable
+ * flag. Usually used prior to a set interface command.
+ *
+ * TODO: Implement after command ring code is done.
+ */
+ BUG_ON(!HC_IS_RUNNING(xhci_to_hcd(xhci)->state));
+ xhci_dbg(xhci, "Finished quiescing -- code not written yet\n");
+}
+
+#if 0
+/* Set up MSI-X table for entry 0 (may claim other entries later) */
+static int xhci_setup_msix(struct xhci_hcd *xhci)
+{
+ int ret;
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+ xhci->msix_count = 0;
+ /* XXX: did I do this right? ixgbe does kcalloc for more than one */
+ xhci->msix_entries = kmalloc(sizeof(struct msix_entry), GFP_KERNEL);
+ if (!xhci->msix_entries) {
+ xhci_err(xhci, "Failed to allocate MSI-X entries\n");
+ return -ENOMEM;
+ }
+ xhci->msix_entries[0].entry = 0;
+
+ ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count);
+ if (ret) {
+ xhci_err(xhci, "Failed to enable MSI-X\n");
+ goto free_entries;
+ }
+
+ /*
+ * Pass the xhci pointer value as the request_irq "cookie".
+ * If more irqs are added, this will need to be unique for each one.
+ */
+ ret = request_irq(xhci->msix_entries[0].vector, &xhci_irq, 0,
+ "xHCI", xhci_to_hcd(xhci));
+ if (ret) {
+ xhci_err(xhci, "Failed to allocate MSI-X interrupt\n");
+ goto disable_msix;
+ }
+ xhci_dbg(xhci, "Finished setting up MSI-X\n");
+ return 0;
+
+disable_msix:
+ pci_disable_msix(pdev);
+free_entries:
+ kfree(xhci->msix_entries);
+ xhci->msix_entries = NULL;
+ return ret;
+}
+
+/* XXX: code duplication; can xhci_setup_msix call this? */
+/* Free any IRQs and disable MSI-X */
+static void xhci_cleanup_msix(struct xhci_hcd *xhci)
+{
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+ if (!xhci->msix_entries)
+ return;
+
+ free_irq(xhci->msix_entries[0].vector, xhci);
+ pci_disable_msix(pdev);
+ kfree(xhci->msix_entries);
+ xhci->msix_entries = NULL;
+ xhci_dbg(xhci, "Finished cleaning up MSI-X\n");
+}
+#endif
+
+/*
+ * Initialize memory for HCD and xHC (one-time init).
+ *
+ * Program the PAGESIZE register, initialize the device context array, create
+ * device contexts (?), set up a command ring segment (or two?), create event
+ * ring (one for now).
+ */
+int xhci_init(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ int retval = 0;
+
+ xhci_dbg(xhci, "xhci_init\n");
+ spin_lock_init(&xhci->lock);
+ retval = xhci_mem_init(xhci, GFP_KERNEL);
+ xhci_dbg(xhci, "Finished xhci_init\n");
+
+ return retval;
+}
+
+/*
+ * Called in interrupt context when there might be work
+ * queued on the event ring
+ *
+ * xhci->lock must be held by caller.
+ */
+static void xhci_work(struct xhci_hcd *xhci)
+{
+ u32 temp;
+
+ /*
+ * Clear the op reg interrupt status first,
+ * so we can receive interrupts from other MSI-X interrupters.
+ * Write 1 to clear the interrupt status.
+ */
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ temp |= STS_EINT;
+ xhci_writel(xhci, temp, &xhci->op_regs->status);
+ /* FIXME when MSI-X is supported and there are multiple vectors */
+ /* Clear the MSI-X event interrupt status */
+
+ /* Acknowledge the interrupt */
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ temp |= 0x3;
+ xhci_writel(xhci, temp, &xhci->ir_set->irq_pending);
+ /* Flush posted writes */
+ xhci_readl(xhci, &xhci->ir_set->irq_pending);
+
+ /* FIXME this should be a delayed service routine that clears the EHB */
+ xhci_handle_event(xhci);
+
+ /* Clear the event handler busy flag; the event ring should be empty. */
+ temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+ xhci_writel(xhci, temp & ~ERST_EHB, &xhci->ir_set->erst_dequeue[0]);
+ /* Flush posted writes -- FIXME is this necessary? */
+ xhci_readl(xhci, &xhci->ir_set->irq_pending);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * xHCI spec says we can get an interrupt, and if the HC has an error condition,
+ * we might get bad data out of the event ring. Section 4.10.2.7 has a list of
+ * indicators of an event TRB error, but we check the status *first* to be safe.
+ */
+irqreturn_t xhci_irq(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ u32 temp, temp2;
+
+ spin_lock(&xhci->lock);
+ /* Check if the xHC generated the interrupt, or the irq is shared */
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
+ spin_unlock(&xhci->lock);
+ return IRQ_NONE;
+ }
+
+ if (temp & STS_FATAL) {
+ xhci_warn(xhci, "WARNING: Host System Error\n");
+ xhci_halt(xhci);
+ xhci_to_hcd(xhci)->state = HC_STATE_HALT;
+ spin_unlock(&xhci->lock);
+ return -ESHUTDOWN;
+ }
+
+ xhci_work(xhci);
+ spin_unlock(&xhci->lock);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+void xhci_event_ring_work(unsigned long arg)
+{
+ unsigned long flags;
+ int temp;
+ struct xhci_hcd *xhci = (struct xhci_hcd *) arg;
+ int i, j;
+
+ xhci_dbg(xhci, "Poll event ring: %lu\n", jiffies);
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ xhci_dbg(xhci, "op reg status = 0x%x\n", temp);
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ xhci_dbg(xhci, "ir_set 0 pending = 0x%x\n", temp);
+ xhci_dbg(xhci, "No-op commands handled = %d\n", xhci->noops_handled);
+ xhci_dbg(xhci, "HC error bitmask = 0x%x\n", xhci->error_bitmask);
+ xhci->error_bitmask = 0;
+ xhci_dbg(xhci, "Event ring:\n");
+ xhci_debug_segment(xhci, xhci->event_ring->deq_seg);
+ xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
+ temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+ temp &= ERST_PTR_MASK;
+ xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
+ xhci_dbg(xhci, "Command ring:\n");
+ xhci_debug_segment(xhci, xhci->cmd_ring->deq_seg);
+ xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+ xhci_dbg_cmd_ptrs(xhci);
+ for (i = 0; i < MAX_HC_SLOTS; ++i) {
+ if (xhci->devs[i]) {
+ for (j = 0; j < 31; ++j) {
+ if (xhci->devs[i]->ep_rings[j]) {
+ xhci_dbg(xhci, "Dev %d endpoint ring %d:\n", i, j);
+ xhci_debug_segment(xhci, xhci->devs[i]->ep_rings[j]->deq_seg);
+ }
+ }
+ }
+ }
+
+ if (xhci->noops_submitted != NUM_TEST_NOOPS)
+ if (xhci_setup_one_noop(xhci))
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ if (!xhci->zombie)
+ mod_timer(&xhci->event_ring_timer, jiffies + POLL_TIMEOUT * HZ);
+ else
+ xhci_dbg(xhci, "Quit polling the event ring.\n");
+}
+#endif
+
+/*
+ * Start the HC after it was halted.
+ *
+ * This function is called by the USB core when the HC driver is added.
+ * Its opposite is xhci_stop().
+ *
+ * xhci_init() must be called once before this function can be called.
+ * Reset the HC, enable device slot contexts, program DCBAAP, and
+ * set command ring pointer and event ring pointer.
+ *
+ * Setup MSI-X vectors and enable interrupts.
+ */
+int xhci_run(struct usb_hcd *hcd)
+{
+ u32 temp;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ void (*doorbell)(struct xhci_hcd *) = NULL;
+
+ hcd->uses_new_polling = 1;
+ hcd->poll_rh = 0;
+
+ xhci_dbg(xhci, "xhci_run\n");
+#if 0 /* FIXME: MSI not setup yet */
+ /* Do this at the very last minute */
+ ret = xhci_setup_msix(xhci);
+ if (!ret)
+ return ret;
+
+ return -ENOSYS;
+#endif
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+ init_timer(&xhci->event_ring_timer);
+ xhci->event_ring_timer.data = (unsigned long) xhci;
+ xhci->event_ring_timer.function = xhci_event_ring_work;
+ /* Poll the event ring */
+ xhci->event_ring_timer.expires = jiffies + POLL_TIMEOUT * HZ;
+ xhci->zombie = 0;
+ xhci_dbg(xhci, "Setting event ring polling timer\n");
+ add_timer(&xhci->event_ring_timer);
+#endif
+
+ xhci_dbg(xhci, "// Set the interrupt modulation register\n");
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
+ temp &= ~ER_IRQ_INTERVAL_MASK;
+ temp |= (u32) 160;
+ xhci_writel(xhci, temp, &xhci->ir_set->irq_control);
+
+ /* Set the HCD state before we enable the irqs */
+ hcd->state = HC_STATE_RUNNING;
+ temp = xhci_readl(xhci, &xhci->op_regs->command);
+ temp |= (CMD_EIE);
+ xhci_dbg(xhci, "// Enable interrupts, cmd = 0x%x.\n",
+ temp);
+ xhci_writel(xhci, temp, &xhci->op_regs->command);
+
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ xhci_dbg(xhci, "// Enabling event ring interrupter %p by writing 0x%x to irq_pending\n",
+ xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp));
+ xhci_writel(xhci, ER_IRQ_ENABLE(temp),
+ &xhci->ir_set->irq_pending);
+ xhci_print_ir_set(xhci, xhci->ir_set, 0);
+
+ if (NUM_TEST_NOOPS > 0)
+ doorbell = xhci_setup_one_noop(xhci);
+
+ xhci_dbg(xhci, "Command ring memory map follows:\n");
+ xhci_debug_ring(xhci, xhci->cmd_ring);
+ xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+ xhci_dbg_cmd_ptrs(xhci);
+
+ xhci_dbg(xhci, "ERST memory map follows:\n");
+ xhci_dbg_erst(xhci, &xhci->erst);
+ xhci_dbg(xhci, "Event ring:\n");
+ xhci_debug_ring(xhci, xhci->event_ring);
+ xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
+ temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+ temp &= ERST_PTR_MASK;
+ xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
+ temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[1]);
+ xhci_dbg(xhci, "ERST deq upper = 0x%x\n", temp);
+
+ temp = xhci_readl(xhci, &xhci->op_regs->command);
+ temp |= (CMD_RUN);
+ xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
+ temp);
+ xhci_writel(xhci, temp, &xhci->op_regs->command);
+ /* Flush PCI posted writes */
+ temp = xhci_readl(xhci, &xhci->op_regs->command);
+ xhci_dbg(xhci, "// @%p = 0x%x\n", &xhci->op_regs->command, temp);
+ if (doorbell)
+ (*doorbell)(xhci);
+
+ xhci_dbg(xhci, "Finished xhci_run\n");
+ return 0;
+}
+
+/*
+ * Stop xHCI driver.
+ *
+ * This function is called by the USB core when the HC driver is removed.
+ * Its opposite is xhci_run().
+ *
+ * Disable device contexts, disable IRQs, and quiesce the HC.
+ * Reset the HC, finish any completed transactions, and cleanup memory.
+ */
+void xhci_stop(struct usb_hcd *hcd)
+{
+ u32 temp;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+ spin_lock_irq(&xhci->lock);
+ if (HC_IS_RUNNING(hcd->state))
+ xhci_quiesce(xhci);
+ xhci_halt(xhci);
+ xhci_reset(xhci);
+ spin_unlock_irq(&xhci->lock);
+
+#if 0 /* No MSI yet */
+ xhci_cleanup_msix(xhci);
+#endif
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+ /* Tell the event ring poll function not to reschedule */
+ xhci->zombie = 1;
+ del_timer_sync(&xhci->event_ring_timer);
+#endif
+
+ xhci_dbg(xhci, "// Disabling event ring interrupts\n");
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ xhci_writel(xhci, ER_IRQ_DISABLE(temp),
+ &xhci->ir_set->irq_pending);
+ xhci_print_ir_set(xhci, xhci->ir_set, 0);
+
+ xhci_dbg(xhci, "cleaning up memory\n");
+ xhci_mem_cleanup(xhci);
+ xhci_dbg(xhci, "xhci_stop completed - status = %x\n",
+ xhci_readl(xhci, &xhci->op_regs->status));
+}
+
+/*
+ * Shutdown HC (not bus-specific)
+ *
+ * This is called when the machine is rebooting or halting. We assume that the
+ * machine will be powered off, and the HC's internal state will be reset.
+ * Don't bother to free memory.
+ */
+void xhci_shutdown(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+ spin_lock_irq(&xhci->lock);
+ xhci_halt(xhci);
+ spin_unlock_irq(&xhci->lock);
+
+#if 0
+ xhci_cleanup_msix(xhci);
+#endif
+
+ xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n",
+ xhci_readl(xhci, &xhci->op_regs->status));
+}
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * xhci_get_endpoint_index - Used for passing endpoint bitmasks between the core and
+ * HCDs. Find the index for an endpoint given its descriptor. Use the return
+ * value to right shift 1 for the bitmask.
+ *
+ * Index = (epnum * 2) + direction - 1,
+ * where direction = 0 for OUT, 1 for IN.
+ * For control endpoints, the IN index is used (OUT index is unused), so
+ * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2)
+ */
+unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc)
+{
+ unsigned int index;
+ if (usb_endpoint_xfer_control(desc))
+ index = (unsigned int) (usb_endpoint_num(desc)*2);
+ else
+ index = (unsigned int) (usb_endpoint_num(desc)*2) +
+ (usb_endpoint_dir_in(desc) ? 1 : 0) - 1;
+ return index;
+}
+
+/* Find the flag for this endpoint (for use in the control context). Use the
+ * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is
+ * bit 1, etc.
+ */
+unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc)
+{
+ return 1 << (xhci_get_endpoint_index(desc) + 1);
+}
+
+/* Compute the last valid endpoint context index. Basically, this is the
+ * endpoint index plus one. For slot contexts with more than valid endpoint,
+ * we find the most significant bit set in the added contexts flags.
+ * e.g. ep 1 IN (with epnum 0x81) => added_ctxs = 0b1000
+ * fls(0b1000) = 4, but the endpoint context index is 3, so subtract one.
+ */
+static inline unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
+{
+ return fls(added_ctxs) - 1;
+}
+
+/* Returns 1 if the arguments are OK;
+ * returns 0 this is a root hub; returns -EINVAL for NULL pointers.
+ */
+int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint *ep, int check_ep, const char *func) {
+ if (!hcd || (check_ep && !ep) || !udev) {
+ printk(KERN_DEBUG "xHCI %s called with invalid args\n",
+ func);
+ return -EINVAL;
+ }
+ if (!udev->parent) {
+ printk(KERN_DEBUG "xHCI %s called for root hub\n",
+ func);
+ return 0;
+ }
+ if (!udev->slot_id) {
+ printk(KERN_DEBUG "xHCI %s called with unaddressed device\n",
+ func);
+ return -EINVAL;
+ }
+ return 1;
+}
+
+/*
+ * non-error returns are a promise to giveback() the urb later
+ * we drop ownership so next owner (or urb unlink) can get it
+ */
+int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ unsigned long flags;
+ int ret = 0;
+ unsigned int slot_id, ep_index;
+
+ if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, true, __func__) <= 0)
+ return -EINVAL;
+
+ slot_id = urb->dev->slot_id;
+ ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (!xhci->devs || !xhci->devs[slot_id]) {
+ if (!in_interrupt())
+ dev_warn(&urb->dev->dev, "WARN: urb submitted for dev with no Slot ID\n");
+ ret = -EINVAL;
+ goto exit;
+ }
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!in_interrupt())
+ xhci_dbg(xhci, "urb submitted during PCI suspend\n");
+ ret = -ESHUTDOWN;
+ goto exit;
+ }
+ if (usb_endpoint_xfer_control(&urb->ep->desc))
+ ret = xhci_queue_ctrl_tx(xhci, mem_flags, urb,
+ slot_id, ep_index);
+ else if (usb_endpoint_xfer_bulk(&urb->ep->desc))
+ ret = xhci_queue_bulk_tx(xhci, mem_flags, urb,
+ slot_id, ep_index);
+ else
+ ret = -EINVAL;
+exit:
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return ret;
+}
+
+/*
+ * Remove the URB's TD from the endpoint ring. This may cause the HC to stop
+ * USB transfers, potentially stopping in the middle of a TRB buffer. The HC
+ * should pick up where it left off in the TD, unless a Set Transfer Ring
+ * Dequeue Pointer is issued.
+ *
+ * The TRBs that make up the buffers for the canceled URB will be "removed" from
+ * the ring. Since the ring is a contiguous structure, they can't be physically
+ * removed. Instead, there are two options:
+ *
+ * 1) If the HC is in the middle of processing the URB to be canceled, we
+ * simply move the ring's dequeue pointer past those TRBs using the Set
+ * Transfer Ring Dequeue Pointer command. This will be the common case,
+ * when drivers timeout on the last submitted URB and attempt to cancel.
+ *
+ * 2) If the HC is in the middle of a different TD, we turn the TRBs into a
+ * series of 1-TRB transfer no-op TDs. (No-ops shouldn't be chained.) The
+ * HC will need to invalidate the any TRBs it has cached after the stop
+ * endpoint command, as noted in the xHCI 0.95 errata.
+ *
+ * 3) The TD may have completed by the time the Stop Endpoint Command
+ * completes, so software needs to handle that case too.
+ *
+ * This function should protect against the TD enqueueing code ringing the
+ * doorbell while this code is waiting for a Stop Endpoint command to complete.
+ * It also needs to account for multiple cancellations on happening at the same
+ * time for the same endpoint.
+ *
+ * Note that this function can be called in any context, or so says
+ * usb_hcd_unlink_urb()
+ */
+int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+ unsigned long flags;
+ int ret;
+ struct xhci_hcd *xhci;
+ struct xhci_td *td;
+ unsigned int ep_index;
+ struct xhci_ring *ep_ring;
+
+ xhci = hcd_to_xhci(hcd);
+ spin_lock_irqsave(&xhci->lock, flags);
+ /* Make sure the URB hasn't completed or been unlinked already */
+ ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (ret || !urb->hcpriv)
+ goto done;
+
+ xhci_dbg(xhci, "Cancel URB %p\n", urb);
+ ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+ ep_ring = xhci->devs[urb->dev->slot_id]->ep_rings[ep_index];
+ td = (struct xhci_td *) urb->hcpriv;
+
+ ep_ring->cancels_pending++;
+ list_add_tail(&td->cancelled_td_list, &ep_ring->cancelled_td_list);
+ /* Queue a stop endpoint command, but only if this is
+ * the first cancellation to be handled.
+ */
+ if (ep_ring->cancels_pending == 1) {
+ xhci_queue_stop_endpoint(xhci, urb->dev->slot_id, ep_index);
+ xhci_ring_cmd_db(xhci);
+ }
+done:
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return ret;
+}
+
+/* Drop an endpoint from a new bandwidth configuration for this device.
+ * Only one call to this function is allowed per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
+ * add the endpoint to the schedule with possibly new parameters denoted by a
+ * different endpoint descriptor in usb_host_endpoint.
+ * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
+ * not allowed.
+ *
+ * The USB core will not allow URBs to be queued to an endpoint that is being
+ * disabled, so there's no need for mutual exclusion to protect
+ * the xhci->devs[slot_id] structure.
+ */
+int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_hcd *xhci;
+ struct xhci_device_control *in_ctx;
+ unsigned int last_ctx;
+ unsigned int ep_index;
+ struct xhci_ep_ctx *ep_ctx;
+ u32 drop_flag;
+ u32 new_add_flags, new_drop_flags, new_slot_info;
+ int ret;
+
+ ret = xhci_check_args(hcd, udev, ep, 1, __func__);
+ if (ret <= 0)
+ return ret;
+ xhci = hcd_to_xhci(hcd);
+ xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+
+ drop_flag = xhci_get_endpoint_flag(&ep->desc);
+ if (drop_flag == SLOT_FLAG || drop_flag == EP0_FLAG) {
+ xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n",
+ __func__, drop_flag);
+ return 0;
+ }
+
+ if (!xhci->devs || !xhci->devs[udev->slot_id]) {
+ xhci_warn(xhci, "xHCI %s called with unaddressed device\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+ /* If the HC already knows the endpoint is disabled,
+ * or the HCD has noted it is disabled, ignore this request
+ */
+ if ((ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED ||
+ in_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
+ xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
+ __func__, ep);
+ return 0;
+ }
+
+ in_ctx->drop_flags |= drop_flag;
+ new_drop_flags = in_ctx->drop_flags;
+
+ in_ctx->add_flags = ~drop_flag;
+ new_add_flags = in_ctx->add_flags;
+
+ last_ctx = xhci_last_valid_endpoint(in_ctx->add_flags);
+ /* Update the last valid endpoint context, if we deleted the last one */
+ if ((in_ctx->slot.dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
+ in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
+ in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+ }
+ new_slot_info = in_ctx->slot.dev_info;
+
+ xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
+
+ xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
+ (unsigned int) ep->desc.bEndpointAddress,
+ udev->slot_id,
+ (unsigned int) new_drop_flags,
+ (unsigned int) new_add_flags,
+ (unsigned int) new_slot_info);
+ return 0;
+}
+
+/* Add an endpoint to a new possible bandwidth configuration for this device.
+ * Only one call to this function is allowed per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
+ * add the endpoint to the schedule with possibly new parameters denoted by a
+ * different endpoint descriptor in usb_host_endpoint.
+ * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
+ * not allowed.
+ *
+ * The USB core will not allow URBs to be queued to an endpoint until the
+ * configuration or alt setting is installed in the device, so there's no need
+ * for mutual exclusion to protect the xhci->devs[slot_id] structure.
+ */
+int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_hcd *xhci;
+ struct xhci_device_control *in_ctx;
+ unsigned int ep_index;
+ struct xhci_ep_ctx *ep_ctx;
+ u32 added_ctxs;
+ unsigned int last_ctx;
+ u32 new_add_flags, new_drop_flags, new_slot_info;
+ int ret = 0;
+
+ ret = xhci_check_args(hcd, udev, ep, 1, __func__);
+ if (ret <= 0)
+ return ret;
+ xhci = hcd_to_xhci(hcd);
+
+ added_ctxs = xhci_get_endpoint_flag(&ep->desc);
+ last_ctx = xhci_last_valid_endpoint(added_ctxs);
+ if (added_ctxs == SLOT_FLAG || added_ctxs == EP0_FLAG) {
+ /* FIXME when we have to issue an evaluate endpoint command to
+ * deal with ep0 max packet size changing once we get the
+ * descriptors
+ */
+ xhci_dbg(xhci, "xHCI %s - can't add slot or ep 0 %#x\n",
+ __func__, added_ctxs);
+ return 0;
+ }
+
+ if (!xhci->devs || !xhci->devs[udev->slot_id]) {
+ xhci_warn(xhci, "xHCI %s called with unaddressed device\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+ /* If the HCD has already noted the endpoint is enabled,
+ * ignore this request.
+ */
+ if (in_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
+ xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
+ __func__, ep);
+ return 0;
+ }
+
+ /*
+ * Configuration and alternate setting changes must be done in
+ * process context, not interrupt context (or so documenation
+ * for usb_set_interface() and usb_set_configuration() claim).
+ */
+ if (xhci_endpoint_init(xhci, xhci->devs[udev->slot_id],
+ udev, ep, GFP_KERNEL) < 0) {
+ dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n",
+ __func__, ep->desc.bEndpointAddress);
+ return -ENOMEM;
+ }
+
+ in_ctx->add_flags |= added_ctxs;
+ new_add_flags = in_ctx->add_flags;
+
+ /* If xhci_endpoint_disable() was called for this endpoint, but the
+ * xHC hasn't been notified yet through the check_bandwidth() call,
+ * this re-adds a new state for the endpoint from the new endpoint
+ * descriptors. We must drop and re-add this endpoint, so we leave the
+ * drop flags alone.
+ */
+ new_drop_flags = in_ctx->drop_flags;
+
+ /* Update the last valid endpoint context, if we just added one past */
+ if ((in_ctx->slot.dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
+ in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
+ in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+ }
+ new_slot_info = in_ctx->slot.dev_info;
+
+ xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
+ (unsigned int) ep->desc.bEndpointAddress,
+ udev->slot_id,
+ (unsigned int) new_drop_flags,
+ (unsigned int) new_add_flags,
+ (unsigned int) new_slot_info);
+ return 0;
+}
+
+static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev)
+{
+ struct xhci_ep_ctx *ep_ctx;
+ int i;
+
+ /* When a device's add flag and drop flag are zero, any subsequent
+ * configure endpoint command will leave that endpoint's state
+ * untouched. Make sure we don't leave any old state in the input
+ * endpoint contexts.
+ */
+ virt_dev->in_ctx->drop_flags = 0;
+ virt_dev->in_ctx->add_flags = 0;
+ virt_dev->in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
+ /* Endpoint 0 is always valid */
+ virt_dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+ for (i = 1; i < 31; ++i) {
+ ep_ctx = &virt_dev->in_ctx->ep[i];
+ ep_ctx->ep_info = 0;
+ ep_ctx->ep_info2 = 0;
+ ep_ctx->deq[0] = 0;
+ ep_ctx->deq[1] = 0;
+ ep_ctx->tx_info = 0;
+ }
+}
+
+/* Called after one or more calls to xhci_add_endpoint() or
+ * xhci_drop_endpoint(). If this call fails, the USB core is expected
+ * to call xhci_reset_bandwidth().
+ *
+ * Since we are in the middle of changing either configuration or
+ * installing a new alt setting, the USB core won't allow URBs to be
+ * enqueued for any endpoint on the old config or interface. Nothing
+ * else should be touching the xhci->devs[slot_id] structure, so we
+ * don't need to take the xhci->lock for manipulating that.
+ */
+int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ int i;
+ int ret = 0;
+ int timeleft;
+ unsigned long flags;
+ struct xhci_hcd *xhci;
+ struct xhci_virt_device *virt_dev;
+
+ ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
+ if (ret <= 0)
+ return ret;
+ xhci = hcd_to_xhci(hcd);
+
+ if (!udev->slot_id || !xhci->devs || !xhci->devs[udev->slot_id]) {
+ xhci_warn(xhci, "xHCI %s called with unaddressed device\n",
+ __func__);
+ return -EINVAL;
+ }
+ xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+ virt_dev = xhci->devs[udev->slot_id];
+
+ /* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
+ virt_dev->in_ctx->add_flags |= SLOT_FLAG;
+ virt_dev->in_ctx->add_flags &= ~EP0_FLAG;
+ virt_dev->in_ctx->drop_flags &= ~SLOT_FLAG;
+ virt_dev->in_ctx->drop_flags &= ~EP0_FLAG;
+ xhci_dbg(xhci, "New Input Control Context:\n");
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma,
+ LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx_dma,
+ udev->slot_id);
+ if (ret < 0) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "FIXME allocate a new ring segment\n");
+ return -ENOMEM;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* Wait for the configure endpoint command to complete */
+ timeleft = wait_for_completion_interruptible_timeout(
+ &virt_dev->cmd_completion,
+ USB_CTRL_SET_TIMEOUT);
+ if (timeleft <= 0) {
+ xhci_warn(xhci, "%s while waiting for configure endpoint command\n",
+ timeleft == 0 ? "Timeout" : "Signal");
+ /* FIXME cancel the configure endpoint command */
+ return -ETIME;
+ }
+
+ switch (virt_dev->cmd_status) {
+ case COMP_ENOMEM:
+ dev_warn(&udev->dev, "Not enough host controller resources "
+ "for new device state.\n");
+ ret = -ENOMEM;
+ /* FIXME: can we allocate more resources for the HC? */
+ break;
+ case COMP_BW_ERR:
+ dev_warn(&udev->dev, "Not enough bandwidth "
+ "for new device state.\n");
+ ret = -ENOSPC;
+ /* FIXME: can we go back to the old state? */
+ break;
+ case COMP_TRB_ERR:
+ /* the HCD set up something wrong */
+ dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, add flag = 1, "
+ "and endpoint is not disabled.\n");
+ ret = -EINVAL;
+ break;
+ case COMP_SUCCESS:
+ dev_dbg(&udev->dev, "Successful Endpoint Configure command\n");
+ break;
+ default:
+ xhci_err(xhci, "ERROR: unexpected command completion "
+ "code 0x%x.\n", virt_dev->cmd_status);
+ ret = -EINVAL;
+ break;
+ }
+ if (ret) {
+ /* Callee should call reset_bandwidth() */
+ return ret;
+ }
+
+ xhci_dbg(xhci, "Output context after successful config ep cmd:\n");
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma,
+ LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+
+ xhci_zero_in_ctx(virt_dev);
+ /* Free any old rings */
+ for (i = 1; i < 31; ++i) {
+ if (virt_dev->new_ep_rings[i]) {
+ xhci_ring_free(xhci, virt_dev->ep_rings[i]);
+ virt_dev->ep_rings[i] = virt_dev->new_ep_rings[i];
+ virt_dev->new_ep_rings[i] = NULL;
+ }
+ }
+
+ return ret;
+}
+
+void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct xhci_hcd *xhci;
+ struct xhci_virt_device *virt_dev;
+ int i, ret;
+
+ ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
+ if (ret <= 0)
+ return;
+ xhci = hcd_to_xhci(hcd);
+
+ if (!xhci->devs || !xhci->devs[udev->slot_id]) {
+ xhci_warn(xhci, "xHCI %s called with unaddressed device\n",
+ __func__);
+ return;
+ }
+ xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+ virt_dev = xhci->devs[udev->slot_id];
+ /* Free any rings allocated for added endpoints */
+ for (i = 0; i < 31; ++i) {
+ if (virt_dev->new_ep_rings[i]) {
+ xhci_ring_free(xhci, virt_dev->new_ep_rings[i]);
+ virt_dev->new_ep_rings[i] = NULL;
+ }
+ }
+ xhci_zero_in_ctx(virt_dev);
+}
+
+/*
+ * At this point, the struct usb_device is about to go away, the device has
+ * disconnected, and all traffic has been stopped and the endpoints have been
+ * disabled. Free any HC data structures associated with that device.
+ */
+void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ unsigned long flags;
+
+ if (udev->slot_id == 0)
+ return;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+ return;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ /*
+ * Event command completion handler will free any data structures
+ * associated with the slot. XXX Can free sleep?
+ */
+}
+
+/*
+ * Returns 0 if the xHC ran out of device slots, the Enable Slot command
+ * timed out, or allocating memory failed. Returns 1 on success.
+ */
+int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ unsigned long flags;
+ int timeleft;
+ int ret;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0);
+ if (ret) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+ return 0;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* XXX: how much time for xHC slot assignment? */
+ timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
+ USB_CTRL_SET_TIMEOUT);
+ if (timeleft <= 0) {
+ xhci_warn(xhci, "%s while waiting for a slot\n",
+ timeleft == 0 ? "Timeout" : "Signal");
+ /* FIXME cancel the enable slot request */
+ return 0;
+ }
+
+ if (!xhci->slot_id) {
+ xhci_err(xhci, "Error while assigning device slot ID\n");
+ return 0;
+ }
+ /* xhci_alloc_virt_device() does not touch rings; no need to lock */
+ if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_KERNEL)) {
+ /* Disable slot, if we can do it without mem alloc */
+ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id))
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return 0;
+ }
+ udev->slot_id = xhci->slot_id;
+ /* Is this a LS or FS device under a HS hub? */
+ /* Hub or peripherial? */
+ return 1;
+}
+
+/*
+ * Issue an Address Device command (which will issue a SetAddress request to
+ * the device).
+ * We should be protected by the usb_address0_mutex in khubd's hub_port_init, so
+ * we should only issue and wait on one address command at the same time.
+ *
+ * We add one to the device address issued by the hardware because the USB core
+ * uses address 1 for the root hubs (even though they're not really devices).
+ */
+int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ unsigned long flags;
+ int timeleft;
+ struct xhci_virt_device *virt_dev;
+ int ret = 0;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ u32 temp;
+
+ if (!udev->slot_id) {
+ xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id);
+ return -EINVAL;
+ }
+
+ virt_dev = xhci->devs[udev->slot_id];
+
+ /* If this is a Set Address to an unconfigured device, setup ep 0 */
+ if (!udev->config)
+ xhci_setup_addressable_virt_dev(xhci, udev);
+ /* Otherwise, assume the core has the device configured how it wants */
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_queue_address_device(xhci, virt_dev->in_ctx_dma,
+ udev->slot_id);
+ if (ret) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+ return ret;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */
+ timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
+ USB_CTRL_SET_TIMEOUT);
+ /* FIXME: From section 4.3.4: "Software shall be responsible for timing
+ * the SetAddress() "recovery interval" required by USB and aborting the
+ * command on a timeout.
+ */
+ if (timeleft <= 0) {
+ xhci_warn(xhci, "%s while waiting for a slot\n",
+ timeleft == 0 ? "Timeout" : "Signal");
+ /* FIXME cancel the address device command */
+ return -ETIME;
+ }
+
+ switch (virt_dev->cmd_status) {
+ case COMP_CTX_STATE:
+ case COMP_EBADSLT:
+ xhci_err(xhci, "Setup ERROR: address device command for slot %d.\n",
+ udev->slot_id);
+ ret = -EINVAL;
+ break;
+ case COMP_TX_ERR:
+ dev_warn(&udev->dev, "Device not responding to set address.\n");
+ ret = -EPROTO;
+ break;
+ case COMP_SUCCESS:
+ xhci_dbg(xhci, "Successful Address Device command\n");
+ break;
+ default:
+ xhci_err(xhci, "ERROR: unexpected command completion "
+ "code 0x%x.\n", virt_dev->cmd_status);
+ ret = -EINVAL;
+ break;
+ }
+ if (ret) {
+ return ret;
+ }
+ temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[0]);
+ xhci_dbg(xhci, "Op regs DCBAA ptr[0] = %#08x\n", temp);
+ temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[1]);
+ xhci_dbg(xhci, "Op regs DCBAA ptr[1] = %#08x\n", temp);
+ xhci_dbg(xhci, "Slot ID %d dcbaa entry[0] @%p = %#08x\n",
+ udev->slot_id,
+ &xhci->dcbaa->dev_context_ptrs[2*udev->slot_id],
+ xhci->dcbaa->dev_context_ptrs[2*udev->slot_id]);
+ xhci_dbg(xhci, "Slot ID %d dcbaa entry[1] @%p = %#08x\n",
+ udev->slot_id,
+ &xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1],
+ xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1]);
+ xhci_dbg(xhci, "Output Context DMA address = %#08llx\n",
+ (unsigned long long)virt_dev->out_ctx_dma);
+ xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma, 2);
+ xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, 2);
+ /*
+ * USB core uses address 1 for the roothubs, so we add one to the
+ * address given back to us by the HC.
+ */
+ udev->devnum = (virt_dev->out_ctx->slot.dev_state & DEV_ADDR_MASK) + 1;
+ /* Zero the input context control for later use */
+ virt_dev->in_ctx->add_flags = 0;
+ virt_dev->in_ctx->drop_flags = 0;
+ /* Mirror flags in the output context for future ep enable/disable */
+ virt_dev->out_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
+ virt_dev->out_ctx->drop_flags = 0;
+
+ xhci_dbg(xhci, "Device address = %d\n", udev->devnum);
+ /* XXX Meh, not sure if anyone else but choose_address uses this. */
+ set_bit(udev->devnum, udev->bus->devmap.devicemap);
+
+ return 0;
+}
+
+int xhci_get_frame(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ /* EHCI mods by the periodic size. Why? */
+ return xhci_readl(xhci, &xhci->run_regs->microframe_index) >> 3;
+}
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+
+static int __init xhci_hcd_init(void)
+{
+#ifdef CONFIG_PCI
+ int retval = 0;
+
+ retval = xhci_register_pci();
+
+ if (retval < 0) {
+ printk(KERN_DEBUG "Problem registering PCI driver.");
+ return retval;
+ }
+#endif
+ /*
+ * Check the compiler generated sizes of structures that must be laid
+ * out in specific ways for hardware access.
+ */
+ BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_slot_ctx) != 8*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_ep_ctx) != 8*32/8);
+ /* xhci_device_control has eight fields, and also
+ * embeds one xhci_slot_ctx and 31 xhci_ep_ctx
+ */
+ BUILD_BUG_ON(sizeof(struct xhci_device_control) != (8+8+8*31)*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8);
+ BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_cap_regs) != 7*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
+ /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
+ BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8);
+ return 0;
+}
+module_init(xhci_hcd_init);
+
+static void __exit xhci_hcd_cleanup(void)
+{
+#ifdef CONFIG_PCI
+ xhci_unregister_pci();
+#endif
+}
+module_exit(xhci_hcd_cleanup);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
new file mode 100644
index 00000000000..eac5b53aa9e
--- /dev/null
+++ b/drivers/usb/host/xhci-hub.c
@@ -0,0 +1,308 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/unaligned.h>
+
+#include "xhci.h"
+
+static void xhci_hub_descriptor(struct xhci_hcd *xhci,
+ struct usb_hub_descriptor *desc)
+{
+ int ports;
+ u16 temp;
+
+ ports = HCS_MAX_PORTS(xhci->hcs_params1);
+
+ /* USB 3.0 hubs have a different descriptor, but we fake this for now */
+ desc->bDescriptorType = 0x29;
+ desc->bPwrOn2PwrGood = 10; /* xhci section 5.4.9 says 20ms max */
+ desc->bHubContrCurrent = 0;
+
+ desc->bNbrPorts = ports;
+ temp = 1 + (ports / 8);
+ desc->bDescLength = 7 + 2 * temp;
+
+ /* Why does core/hcd.h define bitmap? It's just confusing. */
+ memset(&desc->DeviceRemovable[0], 0, temp);
+ memset(&desc->DeviceRemovable[temp], 0xff, temp);
+
+ /* Ugh, these should be #defines, FIXME */
+ /* Using table 11-13 in USB 2.0 spec. */
+ temp = 0;
+ /* Bits 1:0 - support port power switching, or power always on */
+ if (HCC_PPC(xhci->hcc_params))
+ temp |= 0x0001;
+ else
+ temp |= 0x0002;
+ /* Bit 2 - root hubs are not part of a compound device */
+ /* Bits 4:3 - individual port over current protection */
+ temp |= 0x0008;
+ /* Bits 6:5 - no TTs in root ports */
+ /* Bit 7 - no port indicators */
+ desc->wHubCharacteristics = (__force __u16) cpu_to_le16(temp);
+}
+
+static unsigned int xhci_port_speed(unsigned int port_status)
+{
+ if (DEV_LOWSPEED(port_status))
+ return 1 << USB_PORT_FEAT_LOWSPEED;
+ if (DEV_HIGHSPEED(port_status))
+ return 1 << USB_PORT_FEAT_HIGHSPEED;
+ if (DEV_SUPERSPEED(port_status))
+ return 1 << USB_PORT_FEAT_SUPERSPEED;
+ /*
+ * FIXME: Yes, we should check for full speed, but the core uses that as
+ * a default in portspeed() in usb/core/hub.c (which is the only place
+ * USB_PORT_FEAT_*SPEED is used).
+ */
+ return 0;
+}
+
+/*
+ * These bits are Read Only (RO) and should be saved and written to the
+ * registers: 0, 3, 10:13, 30
+ * connect status, over-current status, port speed, and device removable.
+ * connect status and port speed are also sticky - meaning they're in
+ * the AUX well and they aren't changed by a hot, warm, or cold reset.
+ */
+#define XHCI_PORT_RO ((1<<0) | (1<<3) | (0xf<<10) | (1<<30))
+/*
+ * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
+ * bits 5:8, 9, 14:15, 25:27
+ * link state, port power, port indicator state, "wake on" enable state
+ */
+#define XHCI_PORT_RWS ((0xf<<5) | (1<<9) | (0x3<<14) | (0x7<<25))
+/*
+ * These bits are RW; writing a 1 sets the bit, writing a 0 has no effect:
+ * bit 4 (port reset)
+ */
+#define XHCI_PORT_RW1S ((1<<4))
+/*
+ * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
+ * bits 1, 17, 18, 19, 20, 21, 22, 23
+ * port enable/disable, and
+ * change bits: connect, PED, warm port reset changed (reserved zero for USB 2.0 ports),
+ * over-current, reset, link state, and L1 change
+ */
+#define XHCI_PORT_RW1CS ((1<<1) | (0x7f<<17))
+/*
+ * Bit 16 is RW, and writing a '1' to it causes the link state control to be
+ * latched in
+ */
+#define XHCI_PORT_RW ((1<<16))
+/*
+ * These bits are Reserved Zero (RsvdZ) and zero should be written to them:
+ * bits 2, 24, 28:31
+ */
+#define XHCI_PORT_RZ ((1<<2) | (1<<24) | (0xf<<28))
+
+/*
+ * Given a port state, this function returns a value that would result in the
+ * port being in the same state, if the value was written to the port status
+ * control register.
+ * Save Read Only (RO) bits and save read/write bits where
+ * writing a 0 clears the bit and writing a 1 sets the bit (RWS).
+ * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
+ */
+static u32 xhci_port_state_to_neutral(u32 state)
+{
+ /* Save read-only status and port state */
+ return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
+}
+
+int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ int ports;
+ unsigned long flags;
+ u32 temp, status;
+ int retval = 0;
+ u32 __iomem *addr;
+ char *port_change_bit;
+
+ ports = HCS_MAX_PORTS(xhci->hcs_params1);
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ switch (typeReq) {
+ case GetHubStatus:
+ /* No power source, over-current reported per port */
+ memset(buf, 0, 4);
+ break;
+ case GetHubDescriptor:
+ xhci_hub_descriptor(xhci, (struct usb_hub_descriptor *) buf);
+ break;
+ case GetPortStatus:
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ status = 0;
+ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff);
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, "get port status, actual port %d status = 0x%x\n", wIndex, temp);
+
+ /* wPortChange bits */
+ if (temp & PORT_CSC)
+ status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+ if (temp & PORT_PEC)
+ status |= 1 << USB_PORT_FEAT_C_ENABLE;
+ if ((temp & PORT_OCC))
+ status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
+ /*
+ * FIXME ignoring suspend, reset, and USB 2.1/3.0 specific
+ * changes
+ */
+ if (temp & PORT_CONNECT) {
+ status |= 1 << USB_PORT_FEAT_CONNECTION;
+ status |= xhci_port_speed(temp);
+ }
+ if (temp & PORT_PE)
+ status |= 1 << USB_PORT_FEAT_ENABLE;
+ if (temp & PORT_OC)
+ status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+ if (temp & PORT_RESET)
+ status |= 1 << USB_PORT_FEAT_RESET;
+ if (temp & PORT_POWER)
+ status |= 1 << USB_PORT_FEAT_POWER;
+ xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
+ put_unaligned(cpu_to_le32(status), (__le32 *) buf);
+ break;
+ case SetPortFeature:
+ wIndex &= 0xff;
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff);
+ temp = xhci_readl(xhci, addr);
+ temp = xhci_port_state_to_neutral(temp);
+ switch (wValue) {
+ case USB_PORT_FEAT_POWER:
+ /*
+ * Turn on ports, even if there isn't per-port switching.
+ * HC will report connect events even before this is set.
+ * However, khubd will ignore the roothub events until
+ * the roothub is registered.
+ */
+ xhci_writel(xhci, temp | PORT_POWER, addr);
+
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp);
+ break;
+ case USB_PORT_FEAT_RESET:
+ temp = (temp | PORT_RESET);
+ xhci_writel(xhci, temp, addr);
+
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp);
+ break;
+ default:
+ goto error;
+ }
+ temp = xhci_readl(xhci, addr); /* unblock any posted writes */
+ break;
+ case ClearPortFeature:
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ addr = &xhci->op_regs->port_status_base +
+ NUM_PORT_REGS*(wIndex & 0xff);
+ temp = xhci_readl(xhci, addr);
+ temp = xhci_port_state_to_neutral(temp);
+ switch (wValue) {
+ case USB_PORT_FEAT_C_RESET:
+ status = PORT_RC;
+ port_change_bit = "reset";
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ status = PORT_CSC;
+ port_change_bit = "connect";
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ status = PORT_OCC;
+ port_change_bit = "over-current";
+ break;
+ default:
+ goto error;
+ }
+ /* Change bits are all write 1 to clear */
+ xhci_writel(xhci, temp | status, addr);
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, "clear port %s change, actual port %d status = 0x%x\n",
+ port_change_bit, wIndex, temp);
+ temp = xhci_readl(xhci, addr); /* unblock any posted writes */
+ break;
+ default:
+error:
+ /* "stall" on error */
+ retval = -EPIPE;
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return retval;
+}
+
+/*
+ * Returns 0 if the status hasn't changed, or the number of bytes in buf.
+ * Ports are 0-indexed from the HCD point of view,
+ * and 1-indexed from the USB core pointer of view.
+ * xHCI instances can have up to 127 ports, so FIXME if you see more than 15.
+ *
+ * Note that the status change bits will be cleared as soon as a port status
+ * change event is generated, so we use the saved status from that event.
+ */
+int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ unsigned long flags;
+ u32 temp, status;
+ int i, retval;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ int ports;
+ u32 __iomem *addr;
+
+ ports = HCS_MAX_PORTS(xhci->hcs_params1);
+
+ /* Initial status is no changes */
+ buf[0] = 0;
+ status = 0;
+ if (ports > 7) {
+ buf[1] = 0;
+ retval = 2;
+ } else {
+ retval = 1;
+ }
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ /* For each port, did anything change? If so, set that bit in buf. */
+ for (i = 0; i < ports; i++) {
+ addr = &xhci->op_regs->port_status_base +
+ NUM_PORT_REGS*i;
+ temp = xhci_readl(xhci, addr);
+ if (temp & (PORT_CSC | PORT_PEC | PORT_OCC)) {
+ if (i < 7)
+ buf[0] |= 1 << (i + 1);
+ else
+ buf[1] |= 1 << (i - 7);
+ status = 1;
+ }
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return status ? retval : 0;
+}
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
new file mode 100644
index 00000000000..c8a72de1c50
--- /dev/null
+++ b/drivers/usb/host/xhci-mem.c
@@ -0,0 +1,769 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/usb.h>
+#include <linux/pci.h>
+#include <linux/dmapool.h>
+
+#include "xhci.h"
+
+/*
+ * Allocates a generic ring segment from the ring pool, sets the dma address,
+ * initializes the segment to zero, and sets the private next pointer to NULL.
+ *
+ * Section 4.11.1.1:
+ * "All components of all Command and Transfer TRBs shall be initialized to '0'"
+ */
+static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, gfp_t flags)
+{
+ struct xhci_segment *seg;
+ dma_addr_t dma;
+
+ seg = kzalloc(sizeof *seg, flags);
+ if (!seg)
+ return 0;
+ xhci_dbg(xhci, "Allocating priv segment structure at %p\n", seg);
+
+ seg->trbs = dma_pool_alloc(xhci->segment_pool, flags, &dma);
+ if (!seg->trbs) {
+ kfree(seg);
+ return 0;
+ }
+ xhci_dbg(xhci, "// Allocating segment at %p (virtual) 0x%llx (DMA)\n",
+ seg->trbs, (unsigned long long)dma);
+
+ memset(seg->trbs, 0, SEGMENT_SIZE);
+ seg->dma = dma;
+ seg->next = NULL;
+
+ return seg;
+}
+
+static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
+{
+ if (!seg)
+ return;
+ if (seg->trbs) {
+ xhci_dbg(xhci, "Freeing DMA segment at %p (virtual) 0x%llx (DMA)\n",
+ seg->trbs, (unsigned long long)seg->dma);
+ dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
+ seg->trbs = NULL;
+ }
+ xhci_dbg(xhci, "Freeing priv segment structure at %p\n", seg);
+ kfree(seg);
+}
+
+/*
+ * Make the prev segment point to the next segment.
+ *
+ * Change the last TRB in the prev segment to be a Link TRB which points to the
+ * DMA address of the next segment. The caller needs to set any Link TRB
+ * related flags, such as End TRB, Toggle Cycle, and no snoop.
+ */
+static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
+ struct xhci_segment *next, bool link_trbs)
+{
+ u32 val;
+
+ if (!prev || !next)
+ return;
+ prev->next = next;
+ if (link_trbs) {
+ prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr[0] = next->dma;
+
+ /* Set the last TRB in the segment to have a TRB type ID of Link TRB */
+ val = prev->trbs[TRBS_PER_SEGMENT-1].link.control;
+ val &= ~TRB_TYPE_BITMASK;
+ val |= TRB_TYPE(TRB_LINK);
+ prev->trbs[TRBS_PER_SEGMENT-1].link.control = val;
+ }
+ xhci_dbg(xhci, "Linking segment 0x%llx to segment 0x%llx (DMA)\n",
+ (unsigned long long)prev->dma,
+ (unsigned long long)next->dma);
+}
+
+/* XXX: Do we need the hcd structure in all these functions? */
+void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring)
+{
+ struct xhci_segment *seg;
+ struct xhci_segment *first_seg;
+
+ if (!ring || !ring->first_seg)
+ return;
+ first_seg = ring->first_seg;
+ seg = first_seg->next;
+ xhci_dbg(xhci, "Freeing ring at %p\n", ring);
+ while (seg != first_seg) {
+ struct xhci_segment *next = seg->next;
+ xhci_segment_free(xhci, seg);
+ seg = next;
+ }
+ xhci_segment_free(xhci, first_seg);
+ ring->first_seg = NULL;
+ kfree(ring);
+}
+
+/**
+ * Create a new ring with zero or more segments.
+ *
+ * Link each segment together into a ring.
+ * Set the end flag and the cycle toggle bit on the last segment.
+ * See section 4.9.1 and figures 15 and 16.
+ */
+static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
+ unsigned int num_segs, bool link_trbs, gfp_t flags)
+{
+ struct xhci_ring *ring;
+ struct xhci_segment *prev;
+
+ ring = kzalloc(sizeof *(ring), flags);
+ xhci_dbg(xhci, "Allocating ring at %p\n", ring);
+ if (!ring)
+ return 0;
+
+ INIT_LIST_HEAD(&ring->td_list);
+ INIT_LIST_HEAD(&ring->cancelled_td_list);
+ if (num_segs == 0)
+ return ring;
+
+ ring->first_seg = xhci_segment_alloc(xhci, flags);
+ if (!ring->first_seg)
+ goto fail;
+ num_segs--;
+
+ prev = ring->first_seg;
+ while (num_segs > 0) {
+ struct xhci_segment *next;
+
+ next = xhci_segment_alloc(xhci, flags);
+ if (!next)
+ goto fail;
+ xhci_link_segments(xhci, prev, next, link_trbs);
+
+ prev = next;
+ num_segs--;
+ }
+ xhci_link_segments(xhci, prev, ring->first_seg, link_trbs);
+
+ if (link_trbs) {
+ /* See section 4.9.2.1 and 6.4.4.1 */
+ prev->trbs[TRBS_PER_SEGMENT-1].link.control |= (LINK_TOGGLE);
+ xhci_dbg(xhci, "Wrote link toggle flag to"
+ " segment %p (virtual), 0x%llx (DMA)\n",
+ prev, (unsigned long long)prev->dma);
+ }
+ /* The ring is empty, so the enqueue pointer == dequeue pointer */
+ ring->enqueue = ring->first_seg->trbs;
+ ring->enq_seg = ring->first_seg;
+ ring->dequeue = ring->enqueue;
+ ring->deq_seg = ring->first_seg;
+ /* The ring is initialized to 0. The producer must write 1 to the cycle
+ * bit to handover ownership of the TRB, so PCS = 1. The consumer must
+ * compare CCS to the cycle bit to check ownership, so CCS = 1.
+ */
+ ring->cycle_state = 1;
+
+ return ring;
+
+fail:
+ xhci_ring_free(xhci, ring);
+ return 0;
+}
+
+/* All the xhci_tds in the ring's TD list should be freed at this point */
+void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
+{
+ struct xhci_virt_device *dev;
+ int i;
+
+ /* Slot ID 0 is reserved */
+ if (slot_id == 0 || !xhci->devs[slot_id])
+ return;
+
+ dev = xhci->devs[slot_id];
+ xhci->dcbaa->dev_context_ptrs[2*slot_id] = 0;
+ xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+ if (!dev)
+ return;
+
+ for (i = 0; i < 31; ++i)
+ if (dev->ep_rings[i])
+ xhci_ring_free(xhci, dev->ep_rings[i]);
+
+ if (dev->in_ctx)
+ dma_pool_free(xhci->device_pool,
+ dev->in_ctx, dev->in_ctx_dma);
+ if (dev->out_ctx)
+ dma_pool_free(xhci->device_pool,
+ dev->out_ctx, dev->out_ctx_dma);
+ kfree(xhci->devs[slot_id]);
+ xhci->devs[slot_id] = 0;
+}
+
+int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
+ struct usb_device *udev, gfp_t flags)
+{
+ dma_addr_t dma;
+ struct xhci_virt_device *dev;
+
+ /* Slot ID 0 is reserved */
+ if (slot_id == 0 || xhci->devs[slot_id]) {
+ xhci_warn(xhci, "Bad Slot ID %d\n", slot_id);
+ return 0;
+ }
+
+ xhci->devs[slot_id] = kzalloc(sizeof(*xhci->devs[slot_id]), flags);
+ if (!xhci->devs[slot_id])
+ return 0;
+ dev = xhci->devs[slot_id];
+
+ /* Allocate the (output) device context that will be used in the HC */
+ dev->out_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+ if (!dev->out_ctx)
+ goto fail;
+ dev->out_ctx_dma = dma;
+ xhci_dbg(xhci, "Slot %d output ctx = 0x%llx (dma)\n", slot_id,
+ (unsigned long long)dma);
+ memset(dev->out_ctx, 0, sizeof(*dev->out_ctx));
+
+ /* Allocate the (input) device context for address device command */
+ dev->in_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+ if (!dev->in_ctx)
+ goto fail;
+ dev->in_ctx_dma = dma;
+ xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id,
+ (unsigned long long)dma);
+ memset(dev->in_ctx, 0, sizeof(*dev->in_ctx));
+
+ /* Allocate endpoint 0 ring */
+ dev->ep_rings[0] = xhci_ring_alloc(xhci, 1, true, flags);
+ if (!dev->ep_rings[0])
+ goto fail;
+
+ init_completion(&dev->cmd_completion);
+
+ /*
+ * Point to output device context in dcbaa; skip the output control
+ * context, which is eight 32 bit fields (or 32 bytes long)
+ */
+ xhci->dcbaa->dev_context_ptrs[2*slot_id] =
+ (u32) dev->out_ctx_dma + (32);
+ xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n",
+ slot_id,
+ &xhci->dcbaa->dev_context_ptrs[2*slot_id],
+ (unsigned long long)dev->out_ctx_dma);
+ xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+
+ return 1;
+fail:
+ xhci_free_virt_device(xhci, slot_id);
+ return 0;
+}
+
+/* Setup an xHCI virtual device for a Set Address command */
+int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
+{
+ struct xhci_virt_device *dev;
+ struct xhci_ep_ctx *ep0_ctx;
+ struct usb_device *top_dev;
+
+ dev = xhci->devs[udev->slot_id];
+ /* Slot ID 0 is reserved */
+ if (udev->slot_id == 0 || !dev) {
+ xhci_warn(xhci, "Slot ID %d is not assigned to this device\n",
+ udev->slot_id);
+ return -EINVAL;
+ }
+ ep0_ctx = &dev->in_ctx->ep[0];
+
+ /* 2) New slot context and endpoint 0 context are valid*/
+ dev->in_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
+
+ /* 3) Only the control endpoint is valid - one endpoint context */
+ dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+
+ switch (udev->speed) {
+ case USB_SPEED_SUPER:
+ dev->in_ctx->slot.dev_info |= (u32) udev->route;
+ dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_SS;
+ break;
+ case USB_SPEED_HIGH:
+ dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_HS;
+ break;
+ case USB_SPEED_FULL:
+ dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_FS;
+ break;
+ case USB_SPEED_LOW:
+ dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_LS;
+ break;
+ case USB_SPEED_VARIABLE:
+ xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
+ return -EINVAL;
+ break;
+ default:
+ /* Speed was set earlier, this shouldn't happen. */
+ BUG();
+ }
+ /* Find the root hub port this device is under */
+ for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
+ top_dev = top_dev->parent)
+ /* Found device below root hub */;
+ dev->in_ctx->slot.dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
+ xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum);
+
+ /* Is this a LS/FS device under a HS hub? */
+ /*
+ * FIXME: I don't think this is right, where does the TT info for the
+ * roothub or parent hub come from?
+ */
+ if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) &&
+ udev->tt) {
+ dev->in_ctx->slot.tt_info = udev->tt->hub->slot_id;
+ dev->in_ctx->slot.tt_info |= udev->ttport << 8;
+ }
+ xhci_dbg(xhci, "udev->tt = %p\n", udev->tt);
+ xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);
+
+ /* Step 4 - ring already allocated */
+ /* Step 5 */
+ ep0_ctx->ep_info2 = EP_TYPE(CTRL_EP);
+ /*
+ * See section 4.3 bullet 6:
+ * The default Max Packet size for ep0 is "8 bytes for a USB2
+ * LS/FS/HS device or 512 bytes for a USB3 SS device"
+ * XXX: Not sure about wireless USB devices.
+ */
+ if (udev->speed == USB_SPEED_SUPER)
+ ep0_ctx->ep_info2 |= MAX_PACKET(512);
+ else
+ ep0_ctx->ep_info2 |= MAX_PACKET(8);
+ /* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
+ ep0_ctx->ep_info2 |= MAX_BURST(0);
+ ep0_ctx->ep_info2 |= ERROR_COUNT(3);
+
+ ep0_ctx->deq[0] =
+ dev->ep_rings[0]->first_seg->dma;
+ ep0_ctx->deq[0] |= dev->ep_rings[0]->cycle_state;
+ ep0_ctx->deq[1] = 0;
+
+ /* Steps 7 and 8 were done in xhci_alloc_virt_device() */
+
+ return 0;
+}
+
+/* Return the polling or NAK interval.
+ *
+ * The polling interval is expressed in "microframes". If xHCI's Interval field
+ * is set to N, it will service the endpoint every 2^(Interval)*125us.
+ *
+ * The NAK interval is one NAK per 1 to 255 microframes, or no NAKs if interval
+ * is set to 0.
+ */
+static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ unsigned int interval = 0;
+
+ switch (udev->speed) {
+ case USB_SPEED_HIGH:
+ /* Max NAK rate */
+ if (usb_endpoint_xfer_control(&ep->desc) ||
+ usb_endpoint_xfer_bulk(&ep->desc))
+ interval = ep->desc.bInterval;
+ /* Fall through - SS and HS isoc/int have same decoding */
+ case USB_SPEED_SUPER:
+ if (usb_endpoint_xfer_int(&ep->desc) ||
+ usb_endpoint_xfer_isoc(&ep->desc)) {
+ if (ep->desc.bInterval == 0)
+ interval = 0;
+ else
+ interval = ep->desc.bInterval - 1;
+ if (interval > 15)
+ interval = 15;
+ if (interval != ep->desc.bInterval + 1)
+ dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n",
+ ep->desc.bEndpointAddress, 1 << interval);
+ }
+ break;
+ /* Convert bInterval (in 1-255 frames) to microframes and round down to
+ * nearest power of 2.
+ */
+ case USB_SPEED_FULL:
+ case USB_SPEED_LOW:
+ if (usb_endpoint_xfer_int(&ep->desc) ||
+ usb_endpoint_xfer_isoc(&ep->desc)) {
+ interval = fls(8*ep->desc.bInterval) - 1;
+ if (interval > 10)
+ interval = 10;
+ if (interval < 3)
+ interval = 3;
+ if ((1 << interval) != 8*ep->desc.bInterval)
+ dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n",
+ ep->desc.bEndpointAddress, 1 << interval);
+ }
+ break;
+ default:
+ BUG();
+ }
+ return EP_INTERVAL(interval);
+}
+
+static inline u32 xhci_get_endpoint_type(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ int in;
+ u32 type;
+
+ in = usb_endpoint_dir_in(&ep->desc);
+ if (usb_endpoint_xfer_control(&ep->desc)) {
+ type = EP_TYPE(CTRL_EP);
+ } else if (usb_endpoint_xfer_bulk(&ep->desc)) {
+ if (in)
+ type = EP_TYPE(BULK_IN_EP);
+ else
+ type = EP_TYPE(BULK_OUT_EP);
+ } else if (usb_endpoint_xfer_isoc(&ep->desc)) {
+ if (in)
+ type = EP_TYPE(ISOC_IN_EP);
+ else
+ type = EP_TYPE(ISOC_OUT_EP);
+ } else if (usb_endpoint_xfer_int(&ep->desc)) {
+ if (in)
+ type = EP_TYPE(INT_IN_EP);
+ else
+ type = EP_TYPE(INT_OUT_EP);
+ } else {
+ BUG();
+ }
+ return type;
+}
+
+int xhci_endpoint_init(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev,
+ struct usb_device *udev,
+ struct usb_host_endpoint *ep,
+ gfp_t mem_flags)
+{
+ unsigned int ep_index;
+ struct xhci_ep_ctx *ep_ctx;
+ struct xhci_ring *ep_ring;
+ unsigned int max_packet;
+ unsigned int max_burst;
+
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+
+ /* Set up the endpoint ring */
+ virt_dev->new_ep_rings[ep_index] = xhci_ring_alloc(xhci, 1, true, mem_flags);
+ if (!virt_dev->new_ep_rings[ep_index])
+ return -ENOMEM;
+ ep_ring = virt_dev->new_ep_rings[ep_index];
+ ep_ctx->deq[0] = ep_ring->first_seg->dma | ep_ring->cycle_state;
+ ep_ctx->deq[1] = 0;
+
+ ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep);
+
+ /* FIXME dig Mult and streams info out of ep companion desc */
+
+ /* Allow 3 retries for everything but isoc */
+ if (!usb_endpoint_xfer_isoc(&ep->desc))
+ ep_ctx->ep_info2 = ERROR_COUNT(3);
+ else
+ ep_ctx->ep_info2 = ERROR_COUNT(0);
+
+ ep_ctx->ep_info2 |= xhci_get_endpoint_type(udev, ep);
+
+ /* Set the max packet size and max burst */
+ switch (udev->speed) {
+ case USB_SPEED_SUPER:
+ max_packet = ep->desc.wMaxPacketSize;
+ ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
+ /* dig out max burst from ep companion desc */
+ max_packet = ep->ss_ep_comp->desc.bMaxBurst;
+ ep_ctx->ep_info2 |= MAX_BURST(max_packet);
+ break;
+ case USB_SPEED_HIGH:
+ /* bits 11:12 specify the number of additional transaction
+ * opportunities per microframe (USB 2.0, section 9.6.6)
+ */
+ if (usb_endpoint_xfer_isoc(&ep->desc) ||
+ usb_endpoint_xfer_int(&ep->desc)) {
+ max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
+ ep_ctx->ep_info2 |= MAX_BURST(max_burst);
+ }
+ /* Fall through */
+ case USB_SPEED_FULL:
+ case USB_SPEED_LOW:
+ max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+ ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
+ break;
+ default:
+ BUG();
+ }
+ /* FIXME Debug endpoint context */
+ return 0;
+}
+
+void xhci_endpoint_zero(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev,
+ struct usb_host_endpoint *ep)
+{
+ unsigned int ep_index;
+ struct xhci_ep_ctx *ep_ctx;
+
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+
+ ep_ctx->ep_info = 0;
+ ep_ctx->ep_info2 = 0;
+ ep_ctx->deq[0] = 0;
+ ep_ctx->deq[1] = 0;
+ ep_ctx->tx_info = 0;
+ /* Don't free the endpoint ring until the set interface or configuration
+ * request succeeds.
+ */
+}
+
+void xhci_mem_cleanup(struct xhci_hcd *xhci)
+{
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+ int size;
+ int i;
+
+ /* Free the Event Ring Segment Table and the actual Event Ring */
+ xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
+ xhci_writel(xhci, 0, &xhci->ir_set->erst_base[0]);
+ xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
+ xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[0]);
+ xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
+ size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
+ if (xhci->erst.entries)
+ pci_free_consistent(pdev, size,
+ xhci->erst.entries, xhci->erst.erst_dma_addr);
+ xhci->erst.entries = NULL;
+ xhci_dbg(xhci, "Freed ERST\n");
+ if (xhci->event_ring)
+ xhci_ring_free(xhci, xhci->event_ring);
+ xhci->event_ring = NULL;
+ xhci_dbg(xhci, "Freed event ring\n");
+
+ xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[0]);
+ xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[1]);
+ if (xhci->cmd_ring)
+ xhci_ring_free(xhci, xhci->cmd_ring);
+ xhci->cmd_ring = NULL;
+ xhci_dbg(xhci, "Freed command ring\n");
+
+ for (i = 1; i < MAX_HC_SLOTS; ++i)
+ xhci_free_virt_device(xhci, i);
+
+ if (xhci->segment_pool)
+ dma_pool_destroy(xhci->segment_pool);
+ xhci->segment_pool = NULL;
+ xhci_dbg(xhci, "Freed segment pool\n");
+
+ if (xhci->device_pool)
+ dma_pool_destroy(xhci->device_pool);
+ xhci->device_pool = NULL;
+ xhci_dbg(xhci, "Freed device context pool\n");
+
+ xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[0]);
+ xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[1]);
+ if (xhci->dcbaa)
+ pci_free_consistent(pdev, sizeof(*xhci->dcbaa),
+ xhci->dcbaa, xhci->dcbaa->dma);
+ xhci->dcbaa = NULL;
+
+ xhci->page_size = 0;
+ xhci->page_shift = 0;
+}
+
+int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
+{
+ dma_addr_t dma;
+ struct device *dev = xhci_to_hcd(xhci)->self.controller;
+ unsigned int val, val2;
+ struct xhci_segment *seg;
+ u32 page_size;
+ int i;
+
+ page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
+ xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size);
+ for (i = 0; i < 16; i++) {
+ if ((0x1 & page_size) != 0)
+ break;
+ page_size = page_size >> 1;
+ }
+ if (i < 16)
+ xhci_dbg(xhci, "Supported page size of %iK\n", (1 << (i+12)) / 1024);
+ else
+ xhci_warn(xhci, "WARN: no supported page size\n");
+ /* Use 4K pages, since that's common and the minimum the HC supports */
+ xhci->page_shift = 12;
+ xhci->page_size = 1 << xhci->page_shift;
+ xhci_dbg(xhci, "HCD page size set to %iK\n", xhci->page_size / 1024);
+
+ /*
+ * Program the Number of Device Slots Enabled field in the CONFIG
+ * register with the max value of slots the HC can handle.
+ */
+ val = HCS_MAX_SLOTS(xhci_readl(xhci, &xhci->cap_regs->hcs_params1));
+ xhci_dbg(xhci, "// xHC can handle at most %d device slots.\n",
+ (unsigned int) val);
+ val2 = xhci_readl(xhci, &xhci->op_regs->config_reg);
+ val |= (val2 & ~HCS_SLOTS_MASK);
+ xhci_dbg(xhci, "// Setting Max device slots reg = 0x%x.\n",
+ (unsigned int) val);
+ xhci_writel(xhci, val, &xhci->op_regs->config_reg);
+
+ /*
+ * Section 5.4.8 - doorbell array must be
+ * "physically contiguous and 64-byte (cache line) aligned".
+ */
+ xhci->dcbaa = pci_alloc_consistent(to_pci_dev(dev),
+ sizeof(*xhci->dcbaa), &dma);
+ if (!xhci->dcbaa)
+ goto fail;
+ memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa));
+ xhci->dcbaa->dma = dma;
+ xhci_dbg(xhci, "// Device context base array address = 0x%llx (DMA), %p (virt)\n",
+ (unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
+ xhci_writel(xhci, dma, &xhci->op_regs->dcbaa_ptr[0]);
+ xhci_writel(xhci, (u32) 0, &xhci->op_regs->dcbaa_ptr[1]);
+
+ /*
+ * Initialize the ring segment pool. The ring must be a contiguous
+ * structure comprised of TRBs. The TRBs must be 16 byte aligned,
+ * however, the command ring segment needs 64-byte aligned segments,
+ * so we pick the greater alignment need.
+ */
+ xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
+ SEGMENT_SIZE, 64, xhci->page_size);
+ /* See Table 46 and Note on Figure 55 */
+ /* FIXME support 64-byte contexts */
+ xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,
+ sizeof(struct xhci_device_control),
+ 64, xhci->page_size);
+ if (!xhci->segment_pool || !xhci->device_pool)
+ goto fail;
+
+ /* Set up the command ring to have one segments for now. */
+ xhci->cmd_ring = xhci_ring_alloc(xhci, 1, true, flags);
+ if (!xhci->cmd_ring)
+ goto fail;
+ xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
+ xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
+ (unsigned long long)xhci->cmd_ring->first_seg->dma);
+
+ /* Set the address in the Command Ring Control register */
+ val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
+ val = (val & ~CMD_RING_ADDR_MASK) |
+ (xhci->cmd_ring->first_seg->dma & CMD_RING_ADDR_MASK) |
+ xhci->cmd_ring->cycle_state;
+ xhci_dbg(xhci, "// Setting command ring address low bits to 0x%x\n", val);
+ xhci_writel(xhci, val, &xhci->op_regs->cmd_ring[0]);
+ xhci_dbg(xhci, "// Setting command ring address high bits to 0x0\n");
+ xhci_writel(xhci, (u32) 0, &xhci->op_regs->cmd_ring[1]);
+ xhci_dbg_cmd_ptrs(xhci);
+
+ val = xhci_readl(xhci, &xhci->cap_regs->db_off);
+ val &= DBOFF_MASK;
+ xhci_dbg(xhci, "// Doorbell array is located at offset 0x%x"
+ " from cap regs base addr\n", val);
+ xhci->dba = (void *) xhci->cap_regs + val;
+ xhci_dbg_regs(xhci);
+ xhci_print_run_regs(xhci);
+ /* Set ir_set to interrupt register set 0 */
+ xhci->ir_set = (void *) xhci->run_regs->ir_set;
+
+ /*
+ * Event ring setup: Allocate a normal ring, but also setup
+ * the event ring segment table (ERST). Section 4.9.3.
+ */
+ xhci_dbg(xhci, "// Allocating event ring\n");
+ xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, false, flags);
+ if (!xhci->event_ring)
+ goto fail;
+
+ xhci->erst.entries = pci_alloc_consistent(to_pci_dev(dev),
+ sizeof(struct xhci_erst_entry)*ERST_NUM_SEGS, &dma);
+ if (!xhci->erst.entries)
+ goto fail;
+ xhci_dbg(xhci, "// Allocated event ring segment table at 0x%llx\n",
+ (unsigned long long)dma);
+
+ memset(xhci->erst.entries, 0, sizeof(struct xhci_erst_entry)*ERST_NUM_SEGS);
+ xhci->erst.num_entries = ERST_NUM_SEGS;
+ xhci->erst.erst_dma_addr = dma;
+ xhci_dbg(xhci, "Set ERST to 0; private num segs = %i, virt addr = %p, dma addr = 0x%llx\n",
+ xhci->erst.num_entries,
+ xhci->erst.entries,
+ (unsigned long long)xhci->erst.erst_dma_addr);
+
+ /* set ring base address and size for each segment table entry */
+ for (val = 0, seg = xhci->event_ring->first_seg; val < ERST_NUM_SEGS; val++) {
+ struct xhci_erst_entry *entry = &xhci->erst.entries[val];
+ entry->seg_addr[0] = seg->dma;
+ entry->seg_addr[1] = 0;
+ entry->seg_size = TRBS_PER_SEGMENT;
+ entry->rsvd = 0;
+ seg = seg->next;
+ }
+
+ /* set ERST count with the number of entries in the segment table */
+ val = xhci_readl(xhci, &xhci->ir_set->erst_size);
+ val &= ERST_SIZE_MASK;
+ val |= ERST_NUM_SEGS;
+ xhci_dbg(xhci, "// Write ERST size = %i to ir_set 0 (some bits preserved)\n",
+ val);
+ xhci_writel(xhci, val, &xhci->ir_set->erst_size);
+
+ xhci_dbg(xhci, "// Set ERST entries to point to event ring.\n");
+ /* set the segment table base address */
+ xhci_dbg(xhci, "// Set ERST base address for ir_set 0 = 0x%llx\n",
+ (unsigned long long)xhci->erst.erst_dma_addr);
+ val = xhci_readl(xhci, &xhci->ir_set->erst_base[0]);
+ val &= ERST_PTR_MASK;
+ val |= (xhci->erst.erst_dma_addr & ~ERST_PTR_MASK);
+ xhci_writel(xhci, val, &xhci->ir_set->erst_base[0]);
+ xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
+
+ /* Set the event ring dequeue address */
+ xhci_set_hc_event_deq(xhci);
+ xhci_dbg(xhci, "Wrote ERST address to ir_set 0.\n");
+ xhci_print_ir_set(xhci, xhci->ir_set, 0);
+
+ /*
+ * XXX: Might need to set the Interrupter Moderation Register to
+ * something other than the default (~1ms minimum between interrupts).
+ * See section 5.5.1.2.
+ */
+ init_completion(&xhci->addr_dev);
+ for (i = 0; i < MAX_HC_SLOTS; ++i)
+ xhci->devs[i] = 0;
+
+ return 0;
+fail:
+ xhci_warn(xhci, "Couldn't initialize memory\n");
+ xhci_mem_cleanup(xhci);
+ return -ENOMEM;
+}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
new file mode 100644
index 00000000000..1462709e26c
--- /dev/null
+++ b/drivers/usb/host/xhci-pci.c
@@ -0,0 +1,166 @@
+/*
+ * xHCI host controller driver PCI Bus Glue.
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/pci.h>
+
+#include "xhci.h"
+
+static const char hcd_name[] = "xhci_hcd";
+
+/* called after powerup, by probe or system-pm "wakeup" */
+static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
+{
+ /*
+ * TODO: Implement finding debug ports later.
+ * TODO: see if there are any quirks that need to be added to handle
+ * new extended capabilities.
+ */
+
+ /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
+ if (!pci_set_mwi(pdev))
+ xhci_dbg(xhci, "MWI active\n");
+
+ xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
+ return 0;
+}
+
+/* called during probe() after chip reset completes */
+static int xhci_pci_setup(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ int retval;
+
+ xhci->cap_regs = hcd->regs;
+ xhci->op_regs = hcd->regs +
+ HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
+ xhci->run_regs = hcd->regs +
+ (xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
+ /* Cache read-only capability registers */
+ xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
+ xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
+ xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
+ xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+ xhci_print_registers(xhci);
+
+ /* Make sure the HC is halted. */
+ retval = xhci_halt(xhci);
+ if (retval)
+ return retval;
+
+ xhci_dbg(xhci, "Resetting HCD\n");
+ /* Reset the internal HC memory state and registers. */
+ retval = xhci_reset(xhci);
+ if (retval)
+ return retval;
+ xhci_dbg(xhci, "Reset complete\n");
+
+ xhci_dbg(xhci, "Calling HCD init\n");
+ /* Initialize HCD and host controller data structures. */
+ retval = xhci_init(hcd);
+ if (retval)
+ return retval;
+ xhci_dbg(xhci, "Called HCD init\n");
+
+ pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
+ xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
+
+ /* Find any debug ports */
+ return xhci_pci_reinit(xhci, pdev);
+}
+
+static const struct hc_driver xhci_pci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "xHCI Host Controller",
+ .hcd_priv_size = sizeof(struct xhci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = xhci_irq,
+ .flags = HCD_MEMORY | HCD_USB3,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = xhci_pci_setup,
+ .start = xhci_run,
+ /* suspend and resume implemented later */
+ .stop = xhci_stop,
+ .shutdown = xhci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = xhci_urb_enqueue,
+ .urb_dequeue = xhci_urb_dequeue,
+ .alloc_dev = xhci_alloc_dev,
+ .free_dev = xhci_free_dev,
+ .add_endpoint = xhci_add_endpoint,
+ .drop_endpoint = xhci_drop_endpoint,
+ .check_bandwidth = xhci_check_bandwidth,
+ .reset_bandwidth = xhci_reset_bandwidth,
+ .address_device = xhci_address_device,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = xhci_get_frame,
+
+ /* Root hub support */
+ .hub_control = xhci_hub_control,
+ .hub_status_data = xhci_hub_status_data,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* PCI driver selection metadata; PCI hotplugging uses this */
+static const struct pci_device_id pci_ids[] = { {
+ /* handle any USB 3.0 xHCI controller */
+ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
+ .driver_data = (unsigned long) &xhci_pci_hc_driver,
+ },
+ { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+/* pci driver glue; this is a "new style" PCI driver module */
+static struct pci_driver xhci_pci_driver = {
+ .name = (char *) hcd_name,
+ .id_table = pci_ids,
+
+ .probe = usb_hcd_pci_probe,
+ .remove = usb_hcd_pci_remove,
+ /* suspend and resume implemented later */
+
+ .shutdown = usb_hcd_pci_shutdown,
+};
+
+int xhci_register_pci()
+{
+ return pci_register_driver(&xhci_pci_driver);
+}
+
+void xhci_unregister_pci()
+{
+ pci_unregister_driver(&xhci_pci_driver);
+}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
new file mode 100644
index 00000000000..02d81985c45
--- /dev/null
+++ b/drivers/usb/host/xhci-ring.c
@@ -0,0 +1,1648 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Ring initialization rules:
+ * 1. Each segment is initialized to zero, except for link TRBs.
+ * 2. Ring cycle state = 0. This represents Producer Cycle State (PCS) or
+ * Consumer Cycle State (CCS), depending on ring function.
+ * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment.
+ *
+ * Ring behavior rules:
+ * 1. A ring is empty if enqueue == dequeue. This means there will always be at
+ * least one free TRB in the ring. This is useful if you want to turn that
+ * into a link TRB and expand the ring.
+ * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a
+ * link TRB, then load the pointer with the address in the link TRB. If the
+ * link TRB had its toggle bit set, you may need to update the ring cycle
+ * state (see cycle bit rules). You may have to do this multiple times
+ * until you reach a non-link TRB.
+ * 3. A ring is full if enqueue++ (for the definition of increment above)
+ * equals the dequeue pointer.
+ *
+ * Cycle bit rules:
+ * 1. When a consumer increments a dequeue pointer and encounters a toggle bit
+ * in a link TRB, it must toggle the ring cycle state.
+ * 2. When a producer increments an enqueue pointer and encounters a toggle bit
+ * in a link TRB, it must toggle the ring cycle state.
+ *
+ * Producer rules:
+ * 1. Check if ring is full before you enqueue.
+ * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing.
+ * Update enqueue pointer between each write (which may update the ring
+ * cycle state).
+ * 3. Notify consumer. If SW is producer, it rings the doorbell for command
+ * and endpoint rings. If HC is the producer for the event ring,
+ * and it generates an interrupt according to interrupt modulation rules.
+ *
+ * Consumer rules:
+ * 1. Check if TRB belongs to you. If the cycle bit == your ring cycle state,
+ * the TRB is owned by the consumer.
+ * 2. Update dequeue pointer (which may update the ring cycle state) and
+ * continue processing TRBs until you reach a TRB which is not owned by you.
+ * 3. Notify the producer. SW is the consumer for the event ring, and it
+ * updates event ring dequeue pointer. HC is the consumer for the command and
+ * endpoint rings; it generates events on the event ring for these.
+ */
+
+#include <linux/scatterlist.h>
+#include "xhci.h"
+
+/*
+ * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
+ * address of the TRB.
+ */
+dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg,
+ union xhci_trb *trb)
+{
+ unsigned long segment_offset;
+
+ if (!seg || !trb || trb < seg->trbs)
+ return 0;
+ /* offset in TRBs */
+ segment_offset = trb - seg->trbs;
+ if (segment_offset > TRBS_PER_SEGMENT)
+ return 0;
+ return seg->dma + (segment_offset * sizeof(*trb));
+}
+
+/* Does this link TRB point to the first segment in a ring,
+ * or was the previous TRB the last TRB on the last segment in the ERST?
+ */
+static inline bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ struct xhci_segment *seg, union xhci_trb *trb)
+{
+ if (ring == xhci->event_ring)
+ return (trb == &seg->trbs[TRBS_PER_SEGMENT]) &&
+ (seg->next == xhci->event_ring->first_seg);
+ else
+ return trb->link.control & LINK_TOGGLE;
+}
+
+/* Is this TRB a link TRB or was the last TRB the last TRB in this event ring
+ * segment? I.e. would the updated event TRB pointer step off the end of the
+ * event seg?
+ */
+static inline int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ struct xhci_segment *seg, union xhci_trb *trb)
+{
+ if (ring == xhci->event_ring)
+ return trb == &seg->trbs[TRBS_PER_SEGMENT];
+ else
+ return (trb->link.control & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK);
+}
+
+/* Updates trb to point to the next TRB in the ring, and updates seg if the next
+ * TRB is in a new segment. This does not skip over link TRBs, and it does not
+ * effect the ring dequeue or enqueue pointers.
+ */
+static void next_trb(struct xhci_hcd *xhci,
+ struct xhci_ring *ring,
+ struct xhci_segment **seg,
+ union xhci_trb **trb)
+{
+ if (last_trb(xhci, ring, *seg, *trb)) {
+ *seg = (*seg)->next;
+ *trb = ((*seg)->trbs);
+ } else {
+ *trb = (*trb)++;
+ }
+}
+
+/*
+ * See Cycle bit rules. SW is the consumer for the event ring only.
+ * Don't make a ring full of link TRBs. That would be dumb and this would loop.
+ */
+static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
+{
+ union xhci_trb *next = ++(ring->dequeue);
+
+ ring->deq_updates++;
+ /* Update the dequeue pointer further if that was a link TRB or we're at
+ * the end of an event ring segment (which doesn't have link TRBS)
+ */
+ while (last_trb(xhci, ring, ring->deq_seg, next)) {
+ if (consumer && last_trb_on_last_seg(xhci, ring, ring->deq_seg, next)) {
+ ring->cycle_state = (ring->cycle_state ? 0 : 1);
+ if (!in_interrupt())
+ xhci_dbg(xhci, "Toggle cycle state for ring %p = %i\n",
+ ring,
+ (unsigned int) ring->cycle_state);
+ }
+ ring->deq_seg = ring->deq_seg->next;
+ ring->dequeue = ring->deq_seg->trbs;
+ next = ring->dequeue;
+ }
+}
+
+/*
+ * See Cycle bit rules. SW is the consumer for the event ring only.
+ * Don't make a ring full of link TRBs. That would be dumb and this would loop.
+ *
+ * If we've just enqueued a TRB that is in the middle of a TD (meaning the
+ * chain bit is set), then set the chain bit in all the following link TRBs.
+ * If we've enqueued the last TRB in a TD, make sure the following link TRBs
+ * have their chain bit cleared (so that each Link TRB is a separate TD).
+ *
+ * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
+ * set, but other sections talk about dealing with the chain bit set.
+ * Assume section 6.4.4.1 is wrong, and the chain bit can be set in a Link TRB.
+ */
+static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
+{
+ u32 chain;
+ union xhci_trb *next;
+
+ chain = ring->enqueue->generic.field[3] & TRB_CHAIN;
+ next = ++(ring->enqueue);
+
+ ring->enq_updates++;
+ /* Update the dequeue pointer further if that was a link TRB or we're at
+ * the end of an event ring segment (which doesn't have link TRBS)
+ */
+ while (last_trb(xhci, ring, ring->enq_seg, next)) {
+ if (!consumer) {
+ if (ring != xhci->event_ring) {
+ next->link.control &= ~TRB_CHAIN;
+ next->link.control |= chain;
+ /* Give this link TRB to the hardware */
+ wmb();
+ if (next->link.control & TRB_CYCLE)
+ next->link.control &= (u32) ~TRB_CYCLE;
+ else
+ next->link.control |= (u32) TRB_CYCLE;
+ }
+ /* Toggle the cycle bit after the last ring segment. */
+ if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
+ ring->cycle_state = (ring->cycle_state ? 0 : 1);
+ if (!in_interrupt())
+ xhci_dbg(xhci, "Toggle cycle state for ring %p = %i\n",
+ ring,
+ (unsigned int) ring->cycle_state);
+ }
+ }
+ ring->enq_seg = ring->enq_seg->next;
+ ring->enqueue = ring->enq_seg->trbs;
+ next = ring->enqueue;
+ }
+}
+
+/*
+ * Check to see if there's room to enqueue num_trbs on the ring. See rules
+ * above.
+ * FIXME: this would be simpler and faster if we just kept track of the number
+ * of free TRBs in a ring.
+ */
+static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ unsigned int num_trbs)
+{
+ int i;
+ union xhci_trb *enq = ring->enqueue;
+ struct xhci_segment *enq_seg = ring->enq_seg;
+
+ /* Check if ring is empty */
+ if (enq == ring->dequeue)
+ return 1;
+ /* Make sure there's an extra empty TRB available */
+ for (i = 0; i <= num_trbs; ++i) {
+ if (enq == ring->dequeue)
+ return 0;
+ enq++;
+ while (last_trb(xhci, ring, enq_seg, enq)) {
+ enq_seg = enq_seg->next;
+ enq = enq_seg->trbs;
+ }
+ }
+ return 1;
+}
+
+void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
+{
+ u32 temp;
+ dma_addr_t deq;
+
+ deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
+ xhci->event_ring->dequeue);
+ if (deq == 0 && !in_interrupt())
+ xhci_warn(xhci, "WARN something wrong with SW event ring "
+ "dequeue ptr.\n");
+ /* Update HC event ring dequeue pointer */
+ temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+ temp &= ERST_PTR_MASK;
+ if (!in_interrupt())
+ xhci_dbg(xhci, "// Write event ring dequeue pointer\n");
+ xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
+ xhci_writel(xhci, (deq & ~ERST_PTR_MASK) | temp,
+ &xhci->ir_set->erst_dequeue[0]);
+}
+
+/* Ring the host controller doorbell after placing a command on the ring */
+void xhci_ring_cmd_db(struct xhci_hcd *xhci)
+{
+ u32 temp;
+
+ xhci_dbg(xhci, "// Ding dong!\n");
+ temp = xhci_readl(xhci, &xhci->dba->doorbell[0]) & DB_MASK;
+ xhci_writel(xhci, temp | DB_TARGET_HOST, &xhci->dba->doorbell[0]);
+ /* Flush PCI posted writes */
+ xhci_readl(xhci, &xhci->dba->doorbell[0]);
+}
+
+static void ring_ep_doorbell(struct xhci_hcd *xhci,
+ unsigned int slot_id,
+ unsigned int ep_index)
+{
+ struct xhci_ring *ep_ring;
+ u32 field;
+ __u32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
+
+ ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+ /* Don't ring the doorbell for this endpoint if there are pending
+ * cancellations because the we don't want to interrupt processing.
+ */
+ if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)) {
+ field = xhci_readl(xhci, db_addr) & DB_MASK;
+ xhci_writel(xhci, field | EPI_TO_DB(ep_index), db_addr);
+ /* Flush PCI posted writes - FIXME Matthew Wilcox says this
+ * isn't time-critical and we shouldn't make the CPU wait for
+ * the flush.
+ */
+ xhci_readl(xhci, db_addr);
+ }
+}
+
+/*
+ * Find the segment that trb is in. Start searching in start_seg.
+ * If we must move past a segment that has a link TRB with a toggle cycle state
+ * bit set, then we will toggle the value pointed at by cycle_state.
+ */
+static struct xhci_segment *find_trb_seg(
+ struct xhci_segment *start_seg,
+ union xhci_trb *trb, int *cycle_state)
+{
+ struct xhci_segment *cur_seg = start_seg;
+ struct xhci_generic_trb *generic_trb;
+
+ while (cur_seg->trbs > trb ||
+ &cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) {
+ generic_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1].generic;
+ if (TRB_TYPE(generic_trb->field[3]) == TRB_LINK &&
+ (generic_trb->field[3] & LINK_TOGGLE))
+ *cycle_state = ~(*cycle_state) & 0x1;
+ cur_seg = cur_seg->next;
+ if (cur_seg == start_seg)
+ /* Looped over the entire list. Oops! */
+ return 0;
+ }
+ return cur_seg;
+}
+
+struct dequeue_state {
+ struct xhci_segment *new_deq_seg;
+ union xhci_trb *new_deq_ptr;
+ int new_cycle_state;
+};
+
+/*
+ * Move the xHC's endpoint ring dequeue pointer past cur_td.
+ * Record the new state of the xHC's endpoint ring dequeue segment,
+ * dequeue pointer, and new consumer cycle state in state.
+ * Update our internal representation of the ring's dequeue pointer.
+ *
+ * We do this in three jumps:
+ * - First we update our new ring state to be the same as when the xHC stopped.
+ * - Then we traverse the ring to find the segment that contains
+ * the last TRB in the TD. We toggle the xHC's new cycle state when we pass
+ * any link TRBs with the toggle cycle bit set.
+ * - Finally we move the dequeue state one TRB further, toggling the cycle bit
+ * if we've moved it past a link TRB with the toggle cycle bit set.
+ */
+static void find_new_dequeue_state(struct xhci_hcd *xhci,
+ unsigned int slot_id, unsigned int ep_index,
+ struct xhci_td *cur_td, struct dequeue_state *state)
+{
+ struct xhci_virt_device *dev = xhci->devs[slot_id];
+ struct xhci_ring *ep_ring = dev->ep_rings[ep_index];
+ struct xhci_generic_trb *trb;
+
+ state->new_cycle_state = 0;
+ state->new_deq_seg = find_trb_seg(cur_td->start_seg,
+ ep_ring->stopped_trb,
+ &state->new_cycle_state);
+ if (!state->new_deq_seg)
+ BUG();
+ /* Dig out the cycle state saved by the xHC during the stop ep cmd */
+ state->new_cycle_state = 0x1 & dev->out_ctx->ep[ep_index].deq[0];
+
+ state->new_deq_ptr = cur_td->last_trb;
+ state->new_deq_seg = find_trb_seg(state->new_deq_seg,
+ state->new_deq_ptr,
+ &state->new_cycle_state);
+ if (!state->new_deq_seg)
+ BUG();
+
+ trb = &state->new_deq_ptr->generic;
+ if (TRB_TYPE(trb->field[3]) == TRB_LINK &&
+ (trb->field[3] & LINK_TOGGLE))
+ state->new_cycle_state = ~(state->new_cycle_state) & 0x1;
+ next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
+
+ /* Don't update the ring cycle state for the producer (us). */
+ ep_ring->dequeue = state->new_deq_ptr;
+ ep_ring->deq_seg = state->new_deq_seg;
+}
+
+static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
+ struct xhci_td *cur_td)
+{
+ struct xhci_segment *cur_seg;
+ union xhci_trb *cur_trb;
+
+ for (cur_seg = cur_td->start_seg, cur_trb = cur_td->first_trb;
+ true;
+ next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
+ if ((cur_trb->generic.field[3] & TRB_TYPE_BITMASK) ==
+ TRB_TYPE(TRB_LINK)) {
+ /* Unchain any chained Link TRBs, but
+ * leave the pointers intact.
+ */
+ cur_trb->generic.field[3] &= ~TRB_CHAIN;
+ xhci_dbg(xhci, "Cancel (unchain) link TRB\n");
+ xhci_dbg(xhci, "Address = %p (0x%llx dma); "
+ "in seg %p (0x%llx dma)\n",
+ cur_trb,
+ (unsigned long long)xhci_trb_virt_to_dma(cur_seg, cur_trb),
+ cur_seg,
+ (unsigned long long)cur_seg->dma);
+ } else {
+ cur_trb->generic.field[0] = 0;
+ cur_trb->generic.field[1] = 0;
+ cur_trb->generic.field[2] = 0;
+ /* Preserve only the cycle bit of this TRB */
+ cur_trb->generic.field[3] &= TRB_CYCLE;
+ cur_trb->generic.field[3] |= TRB_TYPE(TRB_TR_NOOP);
+ xhci_dbg(xhci, "Cancel TRB %p (0x%llx dma) "
+ "in seg %p (0x%llx dma)\n",
+ cur_trb,
+ (unsigned long long)xhci_trb_virt_to_dma(cur_seg, cur_trb),
+ cur_seg,
+ (unsigned long long)cur_seg->dma);
+ }
+ if (cur_trb == cur_td->last_trb)
+ break;
+ }
+}
+
+static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
+ unsigned int ep_index, struct xhci_segment *deq_seg,
+ union xhci_trb *deq_ptr, u32 cycle_state);
+
+/*
+ * When we get a command completion for a Stop Endpoint Command, we need to
+ * unlink any cancelled TDs from the ring. There are two ways to do that:
+ *
+ * 1. If the HW was in the middle of processing the TD that needs to be
+ * cancelled, then we must move the ring's dequeue pointer past the last TRB
+ * in the TD with a Set Dequeue Pointer Command.
+ * 2. Otherwise, we turn all the TRBs in the TD into No-op TRBs (with the chain
+ * bit cleared) so that the HW will skip over them.
+ */
+static void handle_stopped_endpoint(struct xhci_hcd *xhci,
+ union xhci_trb *trb)
+{
+ unsigned int slot_id;
+ unsigned int ep_index;
+ struct xhci_ring *ep_ring;
+ struct list_head *entry;
+ struct xhci_td *cur_td = 0;
+ struct xhci_td *last_unlinked_td;
+
+ struct dequeue_state deq_state;
+#ifdef CONFIG_USB_HCD_STAT
+ ktime_t stop_time = ktime_get();
+#endif
+
+ memset(&deq_state, 0, sizeof(deq_state));
+ slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
+ ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+ ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+
+ if (list_empty(&ep_ring->cancelled_td_list))
+ return;
+
+ /* Fix up the ep ring first, so HW stops executing cancelled TDs.
+ * We have the xHCI lock, so nothing can modify this list until we drop
+ * it. We're also in the event handler, so we can't get re-interrupted
+ * if another Stop Endpoint command completes
+ */
+ list_for_each(entry, &ep_ring->cancelled_td_list) {
+ cur_td = list_entry(entry, struct xhci_td, cancelled_td_list);
+ xhci_dbg(xhci, "Cancelling TD starting at %p, 0x%llx (dma).\n",
+ cur_td->first_trb,
+ (unsigned long long)xhci_trb_virt_to_dma(cur_td->start_seg, cur_td->first_trb));
+ /*
+ * If we stopped on the TD we need to cancel, then we have to
+ * move the xHC endpoint ring dequeue pointer past this TD.
+ */
+ if (cur_td == ep_ring->stopped_td)
+ find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
+ &deq_state);
+ else
+ td_to_noop(xhci, ep_ring, cur_td);
+ /*
+ * The event handler won't see a completion for this TD anymore,
+ * so remove it from the endpoint ring's TD list. Keep it in
+ * the cancelled TD list for URB completion later.
+ */
+ list_del(&cur_td->td_list);
+ ep_ring->cancels_pending--;
+ }
+ last_unlinked_td = cur_td;
+
+ /* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
+ if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
+ xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
+ "new deq ptr = %p (0x%llx dma), new cycle = %u\n",
+ deq_state.new_deq_seg,
+ (unsigned long long)deq_state.new_deq_seg->dma,
+ deq_state.new_deq_ptr,
+ (unsigned long long)xhci_trb_virt_to_dma(deq_state.new_deq_seg, deq_state.new_deq_ptr),
+ deq_state.new_cycle_state);
+ queue_set_tr_deq(xhci, slot_id, ep_index,
+ deq_state.new_deq_seg,
+ deq_state.new_deq_ptr,
+ (u32) deq_state.new_cycle_state);
+ /* Stop the TD queueing code from ringing the doorbell until
+ * this command completes. The HC won't set the dequeue pointer
+ * if the ring is running, and ringing the doorbell starts the
+ * ring running.
+ */
+ ep_ring->state |= SET_DEQ_PENDING;
+ xhci_ring_cmd_db(xhci);
+ } else {
+ /* Otherwise just ring the doorbell to restart the ring */
+ ring_ep_doorbell(xhci, slot_id, ep_index);
+ }
+
+ /*
+ * Drop the lock and complete the URBs in the cancelled TD list.
+ * New TDs to be cancelled might be added to the end of the list before
+ * we can complete all the URBs for the TDs we already unlinked.
+ * So stop when we've completed the URB for the last TD we unlinked.
+ */
+ do {
+ cur_td = list_entry(ep_ring->cancelled_td_list.next,
+ struct xhci_td, cancelled_td_list);
+ list_del(&cur_td->cancelled_td_list);
+
+ /* Clean up the cancelled URB */
+#ifdef CONFIG_USB_HCD_STAT
+ hcd_stat_update(xhci->tp_stat, cur_td->urb->actual_length,
+ ktime_sub(stop_time, cur_td->start_time));
+#endif
+ cur_td->urb->hcpriv = NULL;
+ usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), cur_td->urb);
+
+ xhci_dbg(xhci, "Giveback cancelled URB %p\n", cur_td->urb);
+ spin_unlock(&xhci->lock);
+ /* Doesn't matter what we pass for status, since the core will
+ * just overwrite it (because the URB has been unlinked).
+ */
+ usb_hcd_giveback_urb(xhci_to_hcd(xhci), cur_td->urb, 0);
+ kfree(cur_td);
+
+ spin_lock(&xhci->lock);
+ } while (cur_td != last_unlinked_td);
+
+ /* Return to the event handler with xhci->lock re-acquired */
+}
+
+/*
+ * When we get a completion for a Set Transfer Ring Dequeue Pointer command,
+ * we need to clear the set deq pending flag in the endpoint ring state, so that
+ * the TD queueing code can ring the doorbell again. We also need to ring the
+ * endpoint doorbell to restart the ring, but only if there aren't more
+ * cancellations pending.
+ */
+static void handle_set_deq_completion(struct xhci_hcd *xhci,
+ struct xhci_event_cmd *event,
+ union xhci_trb *trb)
+{
+ unsigned int slot_id;
+ unsigned int ep_index;
+ struct xhci_ring *ep_ring;
+ struct xhci_virt_device *dev;
+
+ slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
+ ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+ dev = xhci->devs[slot_id];
+ ep_ring = dev->ep_rings[ep_index];
+
+ if (GET_COMP_CODE(event->status) != COMP_SUCCESS) {
+ unsigned int ep_state;
+ unsigned int slot_state;
+
+ switch (GET_COMP_CODE(event->status)) {
+ case COMP_TRB_ERR:
+ xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because "
+ "of stream ID configuration\n");
+ break;
+ case COMP_CTX_STATE:
+ xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due "
+ "to incorrect slot or ep state.\n");
+ ep_state = dev->out_ctx->ep[ep_index].ep_info;
+ ep_state &= EP_STATE_MASK;
+ slot_state = dev->out_ctx->slot.dev_state;
+ slot_state = GET_SLOT_STATE(slot_state);
+ xhci_dbg(xhci, "Slot state = %u, EP state = %u\n",
+ slot_state, ep_state);
+ break;
+ case COMP_EBADSLT:
+ xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because "
+ "slot %u was not enabled.\n", slot_id);
+ break;
+ default:
+ xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown "
+ "completion code of %u.\n",
+ GET_COMP_CODE(event->status));
+ break;
+ }
+ /* OK what do we do now? The endpoint state is hosed, and we
+ * should never get to this point if the synchronization between
+ * queueing, and endpoint state are correct. This might happen
+ * if the device gets disconnected after we've finished
+ * cancelling URBs, which might not be an error...
+ */
+ } else {
+ xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq[0] = 0x%x, "
+ "deq[1] = 0x%x.\n",
+ dev->out_ctx->ep[ep_index].deq[0],
+ dev->out_ctx->ep[ep_index].deq[1]);
+ }
+
+ ep_ring->state &= ~SET_DEQ_PENDING;
+ ring_ep_doorbell(xhci, slot_id, ep_index);
+}
+
+
+static void handle_cmd_completion(struct xhci_hcd *xhci,
+ struct xhci_event_cmd *event)
+{
+ int slot_id = TRB_TO_SLOT_ID(event->flags);
+ u64 cmd_dma;
+ dma_addr_t cmd_dequeue_dma;
+
+ cmd_dma = (((u64) event->cmd_trb[1]) << 32) + event->cmd_trb[0];
+ cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+ xhci->cmd_ring->dequeue);
+ /* Is the command ring deq ptr out of sync with the deq seg ptr? */
+ if (cmd_dequeue_dma == 0) {
+ xhci->error_bitmask |= 1 << 4;
+ return;
+ }
+ /* Does the DMA address match our internal dequeue pointer address? */
+ if (cmd_dma != (u64) cmd_dequeue_dma) {
+ xhci->error_bitmask |= 1 << 5;
+ return;
+ }
+ switch (xhci->cmd_ring->dequeue->generic.field[3] & TRB_TYPE_BITMASK) {
+ case TRB_TYPE(TRB_ENABLE_SLOT):
+ if (GET_COMP_CODE(event->status) == COMP_SUCCESS)
+ xhci->slot_id = slot_id;
+ else
+ xhci->slot_id = 0;
+ complete(&xhci->addr_dev);
+ break;
+ case TRB_TYPE(TRB_DISABLE_SLOT):
+ if (xhci->devs[slot_id])
+ xhci_free_virt_device(xhci, slot_id);
+ break;
+ case TRB_TYPE(TRB_CONFIG_EP):
+ xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status);
+ complete(&xhci->devs[slot_id]->cmd_completion);
+ break;
+ case TRB_TYPE(TRB_ADDR_DEV):
+ xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status);
+ complete(&xhci->addr_dev);
+ break;
+ case TRB_TYPE(TRB_STOP_RING):
+ handle_stopped_endpoint(xhci, xhci->cmd_ring->dequeue);
+ break;
+ case TRB_TYPE(TRB_SET_DEQ):
+ handle_set_deq_completion(xhci, event, xhci->cmd_ring->dequeue);
+ break;
+ case TRB_TYPE(TRB_CMD_NOOP):
+ ++xhci->noops_handled;
+ break;
+ default:
+ /* Skip over unknown commands on the event ring */
+ xhci->error_bitmask |= 1 << 6;
+ break;
+ }
+ inc_deq(xhci, xhci->cmd_ring, false);
+}
+
+static void handle_port_status(struct xhci_hcd *xhci,
+ union xhci_trb *event)
+{
+ u32 port_id;
+
+ /* Port status change events always have a successful completion code */
+ if (GET_COMP_CODE(event->generic.field[2]) != COMP_SUCCESS) {
+ xhci_warn(xhci, "WARN: xHC returned failed port status event\n");
+ xhci->error_bitmask |= 1 << 8;
+ }
+ /* FIXME: core doesn't care about all port link state changes yet */
+ port_id = GET_PORT_ID(event->generic.field[0]);
+ xhci_dbg(xhci, "Port Status Change Event for port %d\n", port_id);
+
+ /* Update event ring dequeue pointer before dropping the lock */
+ inc_deq(xhci, xhci->event_ring, true);
+ xhci_set_hc_event_deq(xhci);
+
+ spin_unlock(&xhci->lock);
+ /* Pass this up to the core */
+ usb_hcd_poll_rh_status(xhci_to_hcd(xhci));
+ spin_lock(&xhci->lock);
+}
+
+/*
+ * This TD is defined by the TRBs starting at start_trb in start_seg and ending
+ * at end_trb, which may be in another segment. If the suspect DMA address is a
+ * TRB in this TD, this function returns that TRB's segment. Otherwise it
+ * returns 0.
+ */
+static struct xhci_segment *trb_in_td(
+ struct xhci_segment *start_seg,
+ union xhci_trb *start_trb,
+ union xhci_trb *end_trb,
+ dma_addr_t suspect_dma)
+{
+ dma_addr_t start_dma;
+ dma_addr_t end_seg_dma;
+ dma_addr_t end_trb_dma;
+ struct xhci_segment *cur_seg;
+
+ start_dma = xhci_trb_virt_to_dma(start_seg, start_trb);
+ cur_seg = start_seg;
+
+ do {
+ /* We may get an event for a Link TRB in the middle of a TD */
+ end_seg_dma = xhci_trb_virt_to_dma(cur_seg,
+ &start_seg->trbs[TRBS_PER_SEGMENT - 1]);
+ /* If the end TRB isn't in this segment, this is set to 0 */
+ end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb);
+
+ if (end_trb_dma > 0) {
+ /* The end TRB is in this segment, so suspect should be here */
+ if (start_dma <= end_trb_dma) {
+ if (suspect_dma >= start_dma && suspect_dma <= end_trb_dma)
+ return cur_seg;
+ } else {
+ /* Case for one segment with
+ * a TD wrapped around to the top
+ */
+ if ((suspect_dma >= start_dma &&
+ suspect_dma <= end_seg_dma) ||
+ (suspect_dma >= cur_seg->dma &&
+ suspect_dma <= end_trb_dma))
+ return cur_seg;
+ }
+ return 0;
+ } else {
+ /* Might still be somewhere in this segment */
+ if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma)
+ return cur_seg;
+ }
+ cur_seg = cur_seg->next;
+ start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
+ } while (1);
+
+}
+
+/*
+ * If this function returns an error condition, it means it got a Transfer
+ * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
+ * At this point, the host controller is probably hosed and should be reset.
+ */
+static int handle_tx_event(struct xhci_hcd *xhci,
+ struct xhci_transfer_event *event)
+{
+ struct xhci_virt_device *xdev;
+ struct xhci_ring *ep_ring;
+ int ep_index;
+ struct xhci_td *td = 0;
+ dma_addr_t event_dma;
+ struct xhci_segment *event_seg;
+ union xhci_trb *event_trb;
+ struct urb *urb = 0;
+ int status = -EINPROGRESS;
+
+ xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)];
+ if (!xdev) {
+ xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
+ return -ENODEV;
+ }
+
+ /* Endpoint ID is 1 based, our index is zero based */
+ ep_index = TRB_TO_EP_ID(event->flags) - 1;
+ ep_ring = xdev->ep_rings[ep_index];
+ if (!ep_ring || (xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
+ xhci_err(xhci, "ERROR Transfer event pointed to disabled endpoint\n");
+ return -ENODEV;
+ }
+
+ event_dma = event->buffer[0];
+ if (event->buffer[1] != 0)
+ xhci_warn(xhci, "WARN ignoring upper 32-bits of 64-bit TRB dma address\n");
+
+ /* This TRB should be in the TD at the head of this ring's TD list */
+ if (list_empty(&ep_ring->td_list)) {
+ xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
+ TRB_TO_SLOT_ID(event->flags), ep_index);
+ xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
+ (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
+ xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
+ urb = NULL;
+ goto cleanup;
+ }
+ td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
+
+ /* Is this a TRB in the currently executing TD? */
+ event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
+ td->last_trb, event_dma);
+ if (!event_seg) {
+ /* HC is busted, give up! */
+ xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n");
+ return -ESHUTDOWN;
+ }
+ event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)];
+ xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
+ (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
+ xhci_dbg(xhci, "Offset 0x00 (buffer[0]) = 0x%x\n",
+ (unsigned int) event->buffer[0]);
+ xhci_dbg(xhci, "Offset 0x04 (buffer[0]) = 0x%x\n",
+ (unsigned int) event->buffer[1]);
+ xhci_dbg(xhci, "Offset 0x08 (transfer length) = 0x%x\n",
+ (unsigned int) event->transfer_len);
+ xhci_dbg(xhci, "Offset 0x0C (flags) = 0x%x\n",
+ (unsigned int) event->flags);
+
+ /* Look for common error cases */
+ switch (GET_COMP_CODE(event->transfer_len)) {
+ /* Skip codes that require special handling depending on
+ * transfer type
+ */
+ case COMP_SUCCESS:
+ case COMP_SHORT_TX:
+ break;
+ case COMP_STOP:
+ xhci_dbg(xhci, "Stopped on Transfer TRB\n");
+ break;
+ case COMP_STOP_INVAL:
+ xhci_dbg(xhci, "Stopped on No-op or Link TRB\n");
+ break;
+ case COMP_STALL:
+ xhci_warn(xhci, "WARN: Stalled endpoint\n");
+ status = -EPIPE;
+ break;
+ case COMP_TRB_ERR:
+ xhci_warn(xhci, "WARN: TRB error on endpoint\n");
+ status = -EILSEQ;
+ break;
+ case COMP_TX_ERR:
+ xhci_warn(xhci, "WARN: transfer error on endpoint\n");
+ status = -EPROTO;
+ break;
+ case COMP_DB_ERR:
+ xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
+ status = -ENOSR;
+ break;
+ default:
+ xhci_warn(xhci, "ERROR Unknown event condition, HC probably busted\n");
+ urb = NULL;
+ goto cleanup;
+ }
+ /* Now update the urb's actual_length and give back to the core */
+ /* Was this a control transfer? */
+ if (usb_endpoint_xfer_control(&td->urb->ep->desc)) {
+ xhci_debug_trb(xhci, xhci->event_ring->dequeue);
+ switch (GET_COMP_CODE(event->transfer_len)) {
+ case COMP_SUCCESS:
+ if (event_trb == ep_ring->dequeue) {
+ xhci_warn(xhci, "WARN: Success on ctrl setup TRB without IOC set??\n");
+ status = -ESHUTDOWN;
+ } else if (event_trb != td->last_trb) {
+ xhci_warn(xhci, "WARN: Success on ctrl data TRB without IOC set??\n");
+ status = -ESHUTDOWN;
+ } else {
+ xhci_dbg(xhci, "Successful control transfer!\n");
+ status = 0;
+ }
+ break;
+ case COMP_SHORT_TX:
+ xhci_warn(xhci, "WARN: short transfer on control ep\n");
+ status = -EREMOTEIO;
+ break;
+ default:
+ /* Others already handled above */
+ break;
+ }
+ /*
+ * Did we transfer any data, despite the errors that might have
+ * happened? I.e. did we get past the setup stage?
+ */
+ if (event_trb != ep_ring->dequeue) {
+ /* The event was for the status stage */
+ if (event_trb == td->last_trb) {
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length;
+ } else {
+ /* Maybe the event was for the data stage? */
+ if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL)
+ /* We didn't stop on a link TRB in the middle */
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length -
+ TRB_LEN(event->transfer_len);
+ }
+ }
+ } else {
+ switch (GET_COMP_CODE(event->transfer_len)) {
+ case COMP_SUCCESS:
+ /* Double check that the HW transferred everything. */
+ if (event_trb != td->last_trb) {
+ xhci_warn(xhci, "WARN Successful completion "
+ "on short TX\n");
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ status = -EREMOTEIO;
+ else
+ status = 0;
+ } else {
+ xhci_dbg(xhci, "Successful bulk transfer!\n");
+ status = 0;
+ }
+ break;
+ case COMP_SHORT_TX:
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ status = -EREMOTEIO;
+ else
+ status = 0;
+ break;
+ default:
+ /* Others already handled above */
+ break;
+ }
+ dev_dbg(&td->urb->dev->dev,
+ "ep %#x - asked for %d bytes, "
+ "%d bytes untransferred\n",
+ td->urb->ep->desc.bEndpointAddress,
+ td->urb->transfer_buffer_length,
+ TRB_LEN(event->transfer_len));
+ /* Fast path - was this the last TRB in the TD for this URB? */
+ if (event_trb == td->last_trb) {
+ if (TRB_LEN(event->transfer_len) != 0) {
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length -
+ TRB_LEN(event->transfer_len);
+ if (td->urb->actual_length < 0) {
+ xhci_warn(xhci, "HC gave bad length "
+ "of %d bytes left\n",
+ TRB_LEN(event->transfer_len));
+ td->urb->actual_length = 0;
+ }
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ status = -EREMOTEIO;
+ else
+ status = 0;
+ } else {
+ td->urb->actual_length = td->urb->transfer_buffer_length;
+ /* Ignore a short packet completion if the
+ * untransferred length was zero.
+ */
+ status = 0;
+ }
+ } else {
+ /* Slow path - walk the list, starting from the dequeue
+ * pointer, to get the actual length transferred.
+ */
+ union xhci_trb *cur_trb;
+ struct xhci_segment *cur_seg;
+
+ td->urb->actual_length = 0;
+ for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg;
+ cur_trb != event_trb;
+ next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
+ if (TRB_TYPE(cur_trb->generic.field[3]) != TRB_TR_NOOP &&
+ TRB_TYPE(cur_trb->generic.field[3]) != TRB_LINK)
+ td->urb->actual_length +=
+ TRB_LEN(cur_trb->generic.field[2]);
+ }
+ /* If the ring didn't stop on a Link or No-op TRB, add
+ * in the actual bytes transferred from the Normal TRB
+ */
+ if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL)
+ td->urb->actual_length +=
+ TRB_LEN(cur_trb->generic.field[2]) -
+ TRB_LEN(event->transfer_len);
+ }
+ }
+ /* The Endpoint Stop Command completion will take care of
+ * any stopped TDs. A stopped TD may be restarted, so don't update the
+ * ring dequeue pointer or take this TD off any lists yet.
+ */
+ if (GET_COMP_CODE(event->transfer_len) == COMP_STOP_INVAL ||
+ GET_COMP_CODE(event->transfer_len) == COMP_STOP) {
+ ep_ring->stopped_td = td;
+ ep_ring->stopped_trb = event_trb;
+ } else {
+ /* Update ring dequeue pointer */
+ while (ep_ring->dequeue != td->last_trb)
+ inc_deq(xhci, ep_ring, false);
+ inc_deq(xhci, ep_ring, false);
+
+ /* Clean up the endpoint's TD list */
+ urb = td->urb;
+ list_del(&td->td_list);
+ /* Was this TD slated to be cancelled but completed anyway? */
+ if (!list_empty(&td->cancelled_td_list)) {
+ list_del(&td->cancelled_td_list);
+ ep_ring->cancels_pending--;
+ }
+ kfree(td);
+ urb->hcpriv = NULL;
+ }
+cleanup:
+ inc_deq(xhci, xhci->event_ring, true);
+ xhci_set_hc_event_deq(xhci);
+
+ /* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */
+ if (urb) {
+ usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
+ spin_unlock(&xhci->lock);
+ usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
+ spin_lock(&xhci->lock);
+ }
+ return 0;
+}
+
+/*
+ * This function handles all OS-owned events on the event ring. It may drop
+ * xhci->lock between event processing (e.g. to pass up port status changes).
+ */
+void xhci_handle_event(struct xhci_hcd *xhci)
+{
+ union xhci_trb *event;
+ int update_ptrs = 1;
+ int ret;
+
+ if (!xhci->event_ring || !xhci->event_ring->dequeue) {
+ xhci->error_bitmask |= 1 << 1;
+ return;
+ }
+
+ event = xhci->event_ring->dequeue;
+ /* Does the HC or OS own the TRB? */
+ if ((event->event_cmd.flags & TRB_CYCLE) !=
+ xhci->event_ring->cycle_state) {
+ xhci->error_bitmask |= 1 << 2;
+ return;
+ }
+
+ /* FIXME: Handle more event types. */
+ switch ((event->event_cmd.flags & TRB_TYPE_BITMASK)) {
+ case TRB_TYPE(TRB_COMPLETION):
+ handle_cmd_completion(xhci, &event->event_cmd);
+ break;
+ case TRB_TYPE(TRB_PORT_STATUS):
+ handle_port_status(xhci, event);
+ update_ptrs = 0;
+ break;
+ case TRB_TYPE(TRB_TRANSFER):
+ ret = handle_tx_event(xhci, &event->trans_event);
+ if (ret < 0)
+ xhci->error_bitmask |= 1 << 9;
+ else
+ update_ptrs = 0;
+ break;
+ default:
+ xhci->error_bitmask |= 1 << 3;
+ }
+
+ if (update_ptrs) {
+ /* Update SW and HC event ring dequeue pointer */
+ inc_deq(xhci, xhci->event_ring, true);
+ xhci_set_hc_event_deq(xhci);
+ }
+ /* Are there more items on the event ring? */
+ xhci_handle_event(xhci);
+}
+
+/**** Endpoint Ring Operations ****/
+
+/*
+ * Generic function for queueing a TRB on a ring.
+ * The caller must have checked to make sure there's room on the ring.
+ */
+static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ bool consumer,
+ u32 field1, u32 field2, u32 field3, u32 field4)
+{
+ struct xhci_generic_trb *trb;
+
+ trb = &ring->enqueue->generic;
+ trb->field[0] = field1;
+ trb->field[1] = field2;
+ trb->field[2] = field3;
+ trb->field[3] = field4;
+ inc_enq(xhci, ring, consumer);
+}
+
+/*
+ * Does various checks on the endpoint ring, and makes it ready to queue num_trbs.
+ * FIXME allocate segments if the ring is full.
+ */
+static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
+ u32 ep_state, unsigned int num_trbs, gfp_t mem_flags)
+{
+ /* Make sure the endpoint has been added to xHC schedule */
+ xhci_dbg(xhci, "Endpoint state = 0x%x\n", ep_state);
+ switch (ep_state) {
+ case EP_STATE_DISABLED:
+ /*
+ * USB core changed config/interfaces without notifying us,
+ * or hardware is reporting the wrong state.
+ */
+ xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
+ return -ENOENT;
+ case EP_STATE_HALTED:
+ case EP_STATE_ERROR:
+ xhci_warn(xhci, "WARN waiting for halt or error on ep "
+ "to be cleared\n");
+ /* FIXME event handling code for error needs to clear it */
+ /* XXX not sure if this should be -ENOENT or not */
+ return -EINVAL;
+ case EP_STATE_STOPPED:
+ case EP_STATE_RUNNING:
+ break;
+ default:
+ xhci_err(xhci, "ERROR unknown endpoint state for ep\n");
+ /*
+ * FIXME issue Configure Endpoint command to try to get the HC
+ * back into a known state.
+ */
+ return -EINVAL;
+ }
+ if (!room_on_ring(xhci, ep_ring, num_trbs)) {
+ /* FIXME allocate more room */
+ xhci_err(xhci, "ERROR no room on ep ring\n");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static int prepare_transfer(struct xhci_hcd *xhci,
+ struct xhci_virt_device *xdev,
+ unsigned int ep_index,
+ unsigned int num_trbs,
+ struct urb *urb,
+ struct xhci_td **td,
+ gfp_t mem_flags)
+{
+ int ret;
+
+ ret = prepare_ring(xhci, xdev->ep_rings[ep_index],
+ xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK,
+ num_trbs, mem_flags);
+ if (ret)
+ return ret;
+ *td = kzalloc(sizeof(struct xhci_td), mem_flags);
+ if (!*td)
+ return -ENOMEM;
+ INIT_LIST_HEAD(&(*td)->td_list);
+ INIT_LIST_HEAD(&(*td)->cancelled_td_list);
+
+ ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb);
+ if (unlikely(ret)) {
+ kfree(*td);
+ return ret;
+ }
+
+ (*td)->urb = urb;
+ urb->hcpriv = (void *) (*td);
+ /* Add this TD to the tail of the endpoint ring's TD list */
+ list_add_tail(&(*td)->td_list, &xdev->ep_rings[ep_index]->td_list);
+ (*td)->start_seg = xdev->ep_rings[ep_index]->enq_seg;
+ (*td)->first_trb = xdev->ep_rings[ep_index]->enqueue;
+
+ return 0;
+}
+
+static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb)
+{
+ int num_sgs, num_trbs, running_total, temp, i;
+ struct scatterlist *sg;
+
+ sg = NULL;
+ num_sgs = urb->num_sgs;
+ temp = urb->transfer_buffer_length;
+
+ xhci_dbg(xhci, "count sg list trbs: \n");
+ num_trbs = 0;
+ for_each_sg(urb->sg->sg, sg, num_sgs, i) {
+ unsigned int previous_total_trbs = num_trbs;
+ unsigned int len = sg_dma_len(sg);
+
+ /* Scatter gather list entries may cross 64KB boundaries */
+ running_total = TRB_MAX_BUFF_SIZE -
+ (sg_dma_address(sg) & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ if (running_total != 0)
+ num_trbs++;
+
+ /* How many more 64KB chunks to transfer, how many more TRBs? */
+ while (running_total < sg_dma_len(sg)) {
+ num_trbs++;
+ running_total += TRB_MAX_BUFF_SIZE;
+ }
+ xhci_dbg(xhci, " sg #%d: dma = %#llx, len = %#x (%d), num_trbs = %d\n",
+ i, (unsigned long long)sg_dma_address(sg),
+ len, len, num_trbs - previous_total_trbs);
+
+ len = min_t(int, len, temp);
+ temp -= len;
+ if (temp == 0)
+ break;
+ }
+ xhci_dbg(xhci, "\n");
+ if (!in_interrupt())
+ dev_dbg(&urb->dev->dev, "ep %#x - urb len = %d, sglist used, num_trbs = %d\n",
+ urb->ep->desc.bEndpointAddress,
+ urb->transfer_buffer_length,
+ num_trbs);
+ return num_trbs;
+}
+
+static void check_trb_math(struct urb *urb, int num_trbs, int running_total)
+{
+ if (num_trbs != 0)
+ dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated number of "
+ "TRBs, %d left\n", __func__,
+ urb->ep->desc.bEndpointAddress, num_trbs);
+ if (running_total != urb->transfer_buffer_length)
+ dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
+ "queued %#x (%d), asked for %#x (%d)\n",
+ __func__,
+ urb->ep->desc.bEndpointAddress,
+ running_total, running_total,
+ urb->transfer_buffer_length,
+ urb->transfer_buffer_length);
+}
+
+static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
+ unsigned int ep_index, int start_cycle,
+ struct xhci_generic_trb *start_trb, struct xhci_td *td)
+{
+ /*
+ * Pass all the TRBs to the hardware at once and make sure this write
+ * isn't reordered.
+ */
+ wmb();
+ start_trb->field[3] |= start_cycle;
+ ring_ep_doorbell(xhci, slot_id, ep_index);
+}
+
+static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ struct urb *urb, int slot_id, unsigned int ep_index)
+{
+ struct xhci_ring *ep_ring;
+ unsigned int num_trbs;
+ struct xhci_td *td;
+ struct scatterlist *sg;
+ int num_sgs;
+ int trb_buff_len, this_sg_len, running_total;
+ bool first_trb;
+ u64 addr;
+
+ struct xhci_generic_trb *start_trb;
+ int start_cycle;
+
+ ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+ num_trbs = count_sg_trbs_needed(xhci, urb);
+ num_sgs = urb->num_sgs;
+
+ trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
+ ep_index, num_trbs, urb, &td, mem_flags);
+ if (trb_buff_len < 0)
+ return trb_buff_len;
+ /*
+ * Don't give the first TRB to the hardware (by toggling the cycle bit)
+ * until we've finished creating all the other TRBs. The ring's cycle
+ * state may change as we enqueue the other TRBs, so save it too.
+ */
+ start_trb = &ep_ring->enqueue->generic;
+ start_cycle = ep_ring->cycle_state;
+
+ running_total = 0;
+ /*
+ * How much data is in the first TRB?
+ *
+ * There are three forces at work for TRB buffer pointers and lengths:
+ * 1. We don't want to walk off the end of this sg-list entry buffer.
+ * 2. The transfer length that the driver requested may be smaller than
+ * the amount of memory allocated for this scatter-gather list.
+ * 3. TRBs buffers can't cross 64KB boundaries.
+ */
+ sg = urb->sg->sg;
+ addr = (u64) sg_dma_address(sg);
+ this_sg_len = sg_dma_len(sg);
+ trb_buff_len = TRB_MAX_BUFF_SIZE -
+ (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
+ if (trb_buff_len > urb->transfer_buffer_length)
+ trb_buff_len = urb->transfer_buffer_length;
+ xhci_dbg(xhci, "First length to xfer from 1st sglist entry = %u\n",
+ trb_buff_len);
+
+ first_trb = true;
+ /* Queue the first TRB, even if it's zero-length */
+ do {
+ u32 field = 0;
+
+ /* Don't change the cycle bit of the first TRB until later */
+ if (first_trb)
+ first_trb = false;
+ else
+ field |= ep_ring->cycle_state;
+
+ /* Chain all the TRBs together; clear the chain bit in the last
+ * TRB to indicate it's the last TRB in the chain.
+ */
+ if (num_trbs > 1) {
+ field |= TRB_CHAIN;
+ } else {
+ /* FIXME - add check for ZERO_PACKET flag before this */
+ td->last_trb = ep_ring->enqueue;
+ field |= TRB_IOC;
+ }
+ xhci_dbg(xhci, " sg entry: dma = %#x, len = %#x (%d), "
+ "64KB boundary at %#x, end dma = %#x\n",
+ (unsigned int) addr, trb_buff_len, trb_buff_len,
+ (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
+ (unsigned int) addr + trb_buff_len);
+ if (TRB_MAX_BUFF_SIZE -
+ (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)) < trb_buff_len) {
+ xhci_warn(xhci, "WARN: sg dma xfer crosses 64KB boundaries!\n");
+ xhci_dbg(xhci, "Next boundary at %#x, end dma = %#x\n",
+ (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
+ (unsigned int) addr + trb_buff_len);
+ }
+ queue_trb(xhci, ep_ring, false,
+ (u32) addr,
+ (u32) ((u64) addr >> 32),
+ TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+ /* We always want to know if the TRB was short,
+ * or we won't get an event when it completes.
+ * (Unless we use event data TRBs, which are a
+ * waste of space and HC resources.)
+ */
+ field | TRB_ISP | TRB_TYPE(TRB_NORMAL));
+ --num_trbs;
+ running_total += trb_buff_len;
+
+ /* Calculate length for next transfer --
+ * Are we done queueing all the TRBs for this sg entry?
+ */
+ this_sg_len -= trb_buff_len;
+ if (this_sg_len == 0) {
+ --num_sgs;
+ if (num_sgs == 0)
+ break;
+ sg = sg_next(sg);
+ addr = (u64) sg_dma_address(sg);
+ this_sg_len = sg_dma_len(sg);
+ } else {
+ addr += trb_buff_len;
+ }
+
+ trb_buff_len = TRB_MAX_BUFF_SIZE -
+ (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
+ if (running_total + trb_buff_len > urb->transfer_buffer_length)
+ trb_buff_len =
+ urb->transfer_buffer_length - running_total;
+ } while (running_total < urb->transfer_buffer_length);
+
+ check_trb_math(urb, num_trbs, running_total);
+ giveback_first_trb(xhci, slot_id, ep_index, start_cycle, start_trb, td);
+ return 0;
+}
+
+/* This is very similar to what ehci-q.c qtd_fill() does */
+int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ struct urb *urb, int slot_id, unsigned int ep_index)
+{
+ struct xhci_ring *ep_ring;
+ struct xhci_td *td;
+ int num_trbs;
+ struct xhci_generic_trb *start_trb;
+ bool first_trb;
+ int start_cycle;
+ u32 field;
+
+ int running_total, trb_buff_len, ret;
+ u64 addr;
+
+ if (urb->sg)
+ return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
+
+ ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+
+ num_trbs = 0;
+ /* How much data is (potentially) left before the 64KB boundary? */
+ running_total = TRB_MAX_BUFF_SIZE -
+ (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+
+ /* If there's some data on this 64KB chunk, or we have to send a
+ * zero-length transfer, we need at least one TRB
+ */
+ if (running_total != 0 || urb->transfer_buffer_length == 0)
+ num_trbs++;
+ /* How many more 64KB chunks to transfer, how many more TRBs? */
+ while (running_total < urb->transfer_buffer_length) {
+ num_trbs++;
+ running_total += TRB_MAX_BUFF_SIZE;
+ }
+ /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
+
+ if (!in_interrupt())
+ dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d), addr = %#llx, num_trbs = %d\n",
+ urb->ep->desc.bEndpointAddress,
+ urb->transfer_buffer_length,
+ urb->transfer_buffer_length,
+ (unsigned long long)urb->transfer_dma,
+ num_trbs);
+
+ ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
+ num_trbs, urb, &td, mem_flags);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Don't give the first TRB to the hardware (by toggling the cycle bit)
+ * until we've finished creating all the other TRBs. The ring's cycle
+ * state may change as we enqueue the other TRBs, so save it too.
+ */
+ start_trb = &ep_ring->enqueue->generic;
+ start_cycle = ep_ring->cycle_state;
+
+ running_total = 0;
+ /* How much data is in the first TRB? */
+ addr = (u64) urb->transfer_dma;
+ trb_buff_len = TRB_MAX_BUFF_SIZE -
+ (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ if (urb->transfer_buffer_length < trb_buff_len)
+ trb_buff_len = urb->transfer_buffer_length;
+
+ first_trb = true;
+
+ /* Queue the first TRB, even if it's zero-length */
+ do {
+ field = 0;
+
+ /* Don't change the cycle bit of the first TRB until later */
+ if (first_trb)
+ first_trb = false;
+ else
+ field |= ep_ring->cycle_state;
+
+ /* Chain all the TRBs together; clear the chain bit in the last
+ * TRB to indicate it's the last TRB in the chain.
+ */
+ if (num_trbs > 1) {
+ field |= TRB_CHAIN;
+ } else {
+ /* FIXME - add check for ZERO_PACKET flag before this */
+ td->last_trb = ep_ring->enqueue;
+ field |= TRB_IOC;
+ }
+ queue_trb(xhci, ep_ring, false,
+ (u32) addr,
+ (u32) ((u64) addr >> 32),
+ TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+ /* We always want to know if the TRB was short,
+ * or we won't get an event when it completes.
+ * (Unless we use event data TRBs, which are a
+ * waste of space and HC resources.)
+ */
+ field | TRB_ISP | TRB_TYPE(TRB_NORMAL));
+ --num_trbs;
+ running_total += trb_buff_len;
+
+ /* Calculate length for next transfer */
+ addr += trb_buff_len;
+ trb_buff_len = urb->transfer_buffer_length - running_total;
+ if (trb_buff_len > TRB_MAX_BUFF_SIZE)
+ trb_buff_len = TRB_MAX_BUFF_SIZE;
+ } while (running_total < urb->transfer_buffer_length);
+
+ check_trb_math(urb, num_trbs, running_total);
+ giveback_first_trb(xhci, slot_id, ep_index, start_cycle, start_trb, td);
+ return 0;
+}
+
+/* Caller must have locked xhci->lock */
+int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ struct urb *urb, int slot_id, unsigned int ep_index)
+{
+ struct xhci_ring *ep_ring;
+ int num_trbs;
+ int ret;
+ struct usb_ctrlrequest *setup;
+ struct xhci_generic_trb *start_trb;
+ int start_cycle;
+ u32 field;
+ struct xhci_td *td;
+
+ ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+
+ /*
+ * Need to copy setup packet into setup TRB, so we can't use the setup
+ * DMA address.
+ */
+ if (!urb->setup_packet)
+ return -EINVAL;
+
+ if (!in_interrupt())
+ xhci_dbg(xhci, "Queueing ctrl tx for slot id %d, ep %d\n",
+ slot_id, ep_index);
+ /* 1 TRB for setup, 1 for status */
+ num_trbs = 2;
+ /*
+ * Don't need to check if we need additional event data and normal TRBs,
+ * since data in control transfers will never get bigger than 16MB
+ * XXX: can we get a buffer that crosses 64KB boundaries?
+ */
+ if (urb->transfer_buffer_length > 0)
+ num_trbs++;
+ ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, num_trbs,
+ urb, &td, mem_flags);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Don't give the first TRB to the hardware (by toggling the cycle bit)
+ * until we've finished creating all the other TRBs. The ring's cycle
+ * state may change as we enqueue the other TRBs, so save it too.
+ */
+ start_trb = &ep_ring->enqueue->generic;
+ start_cycle = ep_ring->cycle_state;
+
+ /* Queue setup TRB - see section 6.4.1.2.1 */
+ /* FIXME better way to translate setup_packet into two u32 fields? */
+ setup = (struct usb_ctrlrequest *) urb->setup_packet;
+ queue_trb(xhci, ep_ring, false,
+ /* FIXME endianness is probably going to bite my ass here. */
+ setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16,
+ setup->wIndex | setup->wLength << 16,
+ TRB_LEN(8) | TRB_INTR_TARGET(0),
+ /* Immediate data in pointer */
+ TRB_IDT | TRB_TYPE(TRB_SETUP));
+
+ /* If there's data, queue data TRBs */
+ field = 0;
+ if (urb->transfer_buffer_length > 0) {
+ if (setup->bRequestType & USB_DIR_IN)
+ field |= TRB_DIR_IN;
+ queue_trb(xhci, ep_ring, false,
+ lower_32_bits(urb->transfer_dma),
+ upper_32_bits(urb->transfer_dma),
+ TRB_LEN(urb->transfer_buffer_length) | TRB_INTR_TARGET(0),
+ /* Event on short tx */
+ field | TRB_ISP | TRB_TYPE(TRB_DATA) | ep_ring->cycle_state);
+ }
+
+ /* Save the DMA address of the last TRB in the TD */
+ td->last_trb = ep_ring->enqueue;
+
+ /* Queue status TRB - see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */
+ /* If the device sent data, the status stage is an OUT transfer */
+ if (urb->transfer_buffer_length > 0 && setup->bRequestType & USB_DIR_IN)
+ field = 0;
+ else
+ field = TRB_DIR_IN;
+ queue_trb(xhci, ep_ring, false,
+ 0,
+ 0,
+ TRB_INTR_TARGET(0),
+ /* Event on completion */
+ field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state);
+
+ giveback_first_trb(xhci, slot_id, ep_index, start_cycle, start_trb, td);
+ return 0;
+}
+
+/**** Command Ring Operations ****/
+
+/* Generic function for queueing a command TRB on the command ring */
+static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, u32 field3, u32 field4)
+{
+ if (!room_on_ring(xhci, xhci->cmd_ring, 1)) {
+ if (!in_interrupt())
+ xhci_err(xhci, "ERR: No room for command on command ring\n");
+ return -ENOMEM;
+ }
+ queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
+ field4 | xhci->cmd_ring->cycle_state);
+ return 0;
+}
+
+/* Queue a no-op command on the command ring */
+static int queue_cmd_noop(struct xhci_hcd *xhci)
+{
+ return queue_command(xhci, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP));
+}
+
+/*
+ * Place a no-op command on the command ring to test the command and
+ * event ring.
+ */
+void *xhci_setup_one_noop(struct xhci_hcd *xhci)
+{
+ if (queue_cmd_noop(xhci) < 0)
+ return NULL;
+ xhci->noops_submitted++;
+ return xhci_ring_cmd_db;
+}
+
+/* Queue a slot enable or disable request on the command ring */
+int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id)
+{
+ return queue_command(xhci, 0, 0, 0,
+ TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id));
+}
+
+/* Queue an address device command TRB */
+int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+ u32 slot_id)
+{
+ return queue_command(xhci, in_ctx_ptr, 0, 0,
+ TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id));
+}
+
+/* Queue a configure endpoint command TRB */
+int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+ u32 slot_id)
+{
+ return queue_command(xhci, in_ctx_ptr, 0, 0,
+ TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id));
+}
+
+int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
+ unsigned int ep_index)
+{
+ u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
+ u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
+ u32 type = TRB_TYPE(TRB_STOP_RING);
+
+ return queue_command(xhci, 0, 0, 0,
+ trb_slot_id | trb_ep_index | type);
+}
+
+/* Set Transfer Ring Dequeue Pointer command.
+ * This should not be used for endpoints that have streams enabled.
+ */
+static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
+ unsigned int ep_index, struct xhci_segment *deq_seg,
+ union xhci_trb *deq_ptr, u32 cycle_state)
+{
+ dma_addr_t addr;
+ u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
+ u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
+ u32 type = TRB_TYPE(TRB_SET_DEQ);
+
+ addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr);
+ if (addr == 0)
+ xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
+ xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n",
+ deq_seg, deq_ptr);
+ return queue_command(xhci, (u32) addr | cycle_state, 0, 0,
+ trb_slot_id | trb_ep_index | type);
+}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
new file mode 100644
index 00000000000..8936eeb5588
--- /dev/null
+++ b/drivers/usb/host/xhci.h
@@ -0,0 +1,1157 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_XHCI_HCD_H
+#define __LINUX_XHCI_HCD_H
+
+#include <linux/usb.h>
+#include <linux/timer.h>
+
+#include "../core/hcd.h"
+/* Code sharing between pci-quirks and xhci hcd */
+#include "xhci-ext-caps.h"
+
+/* xHCI PCI Configuration Registers */
+#define XHCI_SBRN_OFFSET (0x60)
+
+/* Max number of USB devices for any host controller - limit in section 6.1 */
+#define MAX_HC_SLOTS 256
+/* Section 5.3.3 - MaxPorts */
+#define MAX_HC_PORTS 127
+
+/*
+ * xHCI register interface.
+ * This corresponds to the eXtensible Host Controller Interface (xHCI)
+ * Revision 0.95 specification
+ *
+ * Registers should always be accessed with double word or quad word accesses.
+ *
+ * Some xHCI implementations may support 64-bit address pointers. Registers
+ * with 64-bit address pointers should be written to with dword accesses by
+ * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
+ * xHCI implementations that do not support 64-bit address pointers will ignore
+ * the high dword, and write order is irrelevant.
+ */
+
+/**
+ * struct xhci_cap_regs - xHCI Host Controller Capability Registers.
+ * @hc_capbase: length of the capabilities register and HC version number
+ * @hcs_params1: HCSPARAMS1 - Structural Parameters 1
+ * @hcs_params2: HCSPARAMS2 - Structural Parameters 2
+ * @hcs_params3: HCSPARAMS3 - Structural Parameters 3
+ * @hcc_params: HCCPARAMS - Capability Parameters
+ * @db_off: DBOFF - Doorbell array offset
+ * @run_regs_off: RTSOFF - Runtime register space offset
+ */
+struct xhci_cap_regs {
+ u32 hc_capbase;
+ u32 hcs_params1;
+ u32 hcs_params2;
+ u32 hcs_params3;
+ u32 hcc_params;
+ u32 db_off;
+ u32 run_regs_off;
+ /* Reserved up to (CAPLENGTH - 0x1C) */
+};
+
+/* hc_capbase bitmasks */
+/* bits 7:0 - how long is the Capabilities register */
+#define HC_LENGTH(p) XHCI_HC_LENGTH(p)
+/* bits 31:16 */
+#define HC_VERSION(p) (((p) >> 16) & 0xffff)
+
+/* HCSPARAMS1 - hcs_params1 - bitmasks */
+/* bits 0:7, Max Device Slots */
+#define HCS_MAX_SLOTS(p) (((p) >> 0) & 0xff)
+#define HCS_SLOTS_MASK 0xff
+/* bits 8:18, Max Interrupters */
+#define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff)
+/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
+#define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f)
+
+/* HCSPARAMS2 - hcs_params2 - bitmasks */
+/* bits 0:3, frames or uframes that SW needs to queue transactions
+ * ahead of the HW to meet periodic deadlines */
+#define HCS_IST(p) (((p) >> 0) & 0xf)
+/* bits 4:7, max number of Event Ring segments */
+#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf)
+/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
+/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
+
+/* HCSPARAMS3 - hcs_params3 - bitmasks */
+/* bits 0:7, Max U1 to U0 latency for the roothub ports */
+#define HCS_U1_LATENCY(p) (((p) >> 0) & 0xff)
+/* bits 16:31, Max U2 to U0 latency for the roothub ports */
+#define HCS_U2_LATENCY(p) (((p) >> 16) & 0xffff)
+
+/* HCCPARAMS - hcc_params - bitmasks */
+/* true: HC can use 64-bit address pointers */
+#define HCC_64BIT_ADDR(p) ((p) & (1 << 0))
+/* true: HC can do bandwidth negotiation */
+#define HCC_BANDWIDTH_NEG(p) ((p) & (1 << 1))
+/* true: HC uses 64-byte Device Context structures
+ * FIXME 64-byte context structures aren't supported yet.
+ */
+#define HCC_64BYTE_CONTEXT(p) ((p) & (1 << 2))
+/* true: HC has port power switches */
+#define HCC_PPC(p) ((p) & (1 << 3))
+/* true: HC has port indicators */
+#define HCS_INDICATOR(p) ((p) & (1 << 4))
+/* true: HC has Light HC Reset Capability */
+#define HCC_LIGHT_RESET(p) ((p) & (1 << 5))
+/* true: HC supports latency tolerance messaging */
+#define HCC_LTC(p) ((p) & (1 << 6))
+/* true: no secondary Stream ID Support */
+#define HCC_NSS(p) ((p) & (1 << 7))
+/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
+#define HCC_MAX_PSA (1 << ((((p) >> 12) & 0xf) + 1))
+/* Extended Capabilities pointer from PCI base - section 5.3.6 */
+#define HCC_EXT_CAPS(p) XHCI_HCC_EXT_CAPS(p)
+
+/* db_off bitmask - bits 0:1 reserved */
+#define DBOFF_MASK (~0x3)
+
+/* run_regs_off bitmask - bits 0:4 reserved */
+#define RTSOFF_MASK (~0x1f)
+
+
+/* Number of registers per port */
+#define NUM_PORT_REGS 4
+
+/**
+ * struct xhci_op_regs - xHCI Host Controller Operational Registers.
+ * @command: USBCMD - xHC command register
+ * @status: USBSTS - xHC status register
+ * @page_size: This indicates the page size that the host controller
+ * supports. If bit n is set, the HC supports a page size
+ * of 2^(n+12), up to a 128MB page size.
+ * 4K is the minimum page size.
+ * @cmd_ring: CRP - 64-bit Command Ring Pointer
+ * @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer
+ * @config_reg: CONFIG - Configure Register
+ * @port_status_base: PORTSCn - base address for Port Status and Control
+ * Each port has a Port Status and Control register,
+ * followed by a Port Power Management Status and Control
+ * register, a Port Link Info register, and a reserved
+ * register.
+ * @port_power_base: PORTPMSCn - base address for
+ * Port Power Management Status and Control
+ * @port_link_base: PORTLIn - base address for Port Link Info (current
+ * Link PM state and control) for USB 2.1 and USB 3.0
+ * devices.
+ */
+struct xhci_op_regs {
+ u32 command;
+ u32 status;
+ u32 page_size;
+ u32 reserved1;
+ u32 reserved2;
+ u32 dev_notification;
+ u32 cmd_ring[2];
+ /* rsvd: offset 0x20-2F */
+ u32 reserved3[4];
+ u32 dcbaa_ptr[2];
+ u32 config_reg;
+ /* rsvd: offset 0x3C-3FF */
+ u32 reserved4[241];
+ /* port 1 registers, which serve as a base address for other ports */
+ u32 port_status_base;
+ u32 port_power_base;
+ u32 port_link_base;
+ u32 reserved5;
+ /* registers for ports 2-255 */
+ u32 reserved6[NUM_PORT_REGS*254];
+};
+
+/* USBCMD - USB command - command bitmasks */
+/* start/stop HC execution - do not write unless HC is halted*/
+#define CMD_RUN XHCI_CMD_RUN
+/* Reset HC - resets internal HC state machine and all registers (except
+ * PCI config regs). HC does NOT drive a USB reset on the downstream ports.
+ * The xHCI driver must reinitialize the xHC after setting this bit.
+ */
+#define CMD_RESET (1 << 1)
+/* Event Interrupt Enable - a '1' allows interrupts from the host controller */
+#define CMD_EIE XHCI_CMD_EIE
+/* Host System Error Interrupt Enable - get out-of-band signal for HC errors */
+#define CMD_HSEIE XHCI_CMD_HSEIE
+/* bits 4:6 are reserved (and should be preserved on writes). */
+/* light reset (port status stays unchanged) - reset completed when this is 0 */
+#define CMD_LRESET (1 << 7)
+/* FIXME: ignoring host controller save/restore state for now. */
+#define CMD_CSS (1 << 8)
+#define CMD_CRS (1 << 9)
+/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
+#define CMD_EWE XHCI_CMD_EWE
+/* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root
+ * hubs are in U3 (selective suspend), disconnect, disabled, or powered-off.
+ * '0' means the xHC can power it off if all ports are in the disconnect,
+ * disabled, or powered-off state.
+ */
+#define CMD_PM_INDEX (1 << 11)
+/* bits 12:31 are reserved (and should be preserved on writes). */
+
+/* USBSTS - USB status - status bitmasks */
+/* HC not running - set to 1 when run/stop bit is cleared. */
+#define STS_HALT XHCI_STS_HALT
+/* serious error, e.g. PCI parity error. The HC will clear the run/stop bit. */
+#define STS_FATAL (1 << 2)
+/* event interrupt - clear this prior to clearing any IP flags in IR set*/
+#define STS_EINT (1 << 3)
+/* port change detect */
+#define STS_PORT (1 << 4)
+/* bits 5:7 reserved and zeroed */
+/* save state status - '1' means xHC is saving state */
+#define STS_SAVE (1 << 8)
+/* restore state status - '1' means xHC is restoring state */
+#define STS_RESTORE (1 << 9)
+/* true: save or restore error */
+#define STS_SRE (1 << 10)
+/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
+#define STS_CNR XHCI_STS_CNR
+/* true: internal Host Controller Error - SW needs to reset and reinitialize */
+#define STS_HCE (1 << 12)
+/* bits 13:31 reserved and should be preserved */
+
+/*
+ * DNCTRL - Device Notification Control Register - dev_notification bitmasks
+ * Generate a device notification event when the HC sees a transaction with a
+ * notification type that matches a bit set in this bit field.
+ */
+#define DEV_NOTE_MASK (0xffff)
+#define ENABLE_DEV_NOTE(x) (1 << x)
+/* Most of the device notification types should only be used for debug.
+ * SW does need to pay attention to function wake notifications.
+ */
+#define DEV_NOTE_FWAKE ENABLE_DEV_NOTE(1)
+
+/* CRCR - Command Ring Control Register - cmd_ring bitmasks */
+/* bit 0 is the command ring cycle state */
+/* stop ring operation after completion of the currently executing command */
+#define CMD_RING_PAUSE (1 << 1)
+/* stop ring immediately - abort the currently executing command */
+#define CMD_RING_ABORT (1 << 2)
+/* true: command ring is running */
+#define CMD_RING_RUNNING (1 << 3)
+/* bits 4:5 reserved and should be preserved */
+/* Command Ring pointer - bit mask for the lower 32 bits. */
+#define CMD_RING_ADDR_MASK (0xffffffc0)
+
+/* CONFIG - Configure Register - config_reg bitmasks */
+/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
+#define MAX_DEVS(p) ((p) & 0xff)
+/* bits 8:31 - reserved and should be preserved */
+
+/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
+/* true: device connected */
+#define PORT_CONNECT (1 << 0)
+/* true: port enabled */
+#define PORT_PE (1 << 1)
+/* bit 2 reserved and zeroed */
+/* true: port has an over-current condition */
+#define PORT_OC (1 << 3)
+/* true: port reset signaling asserted */
+#define PORT_RESET (1 << 4)
+/* Port Link State - bits 5:8
+ * A read gives the current link PM state of the port,
+ * a write with Link State Write Strobe set sets the link state.
+ */
+/* true: port has power (see HCC_PPC) */
+#define PORT_POWER (1 << 9)
+/* bits 10:13 indicate device speed:
+ * 0 - undefined speed - port hasn't be initialized by a reset yet
+ * 1 - full speed
+ * 2 - low speed
+ * 3 - high speed
+ * 4 - super speed
+ * 5-15 reserved
+ */
+#define DEV_SPEED_MASK (0xf << 10)
+#define XDEV_FS (0x1 << 10)
+#define XDEV_LS (0x2 << 10)
+#define XDEV_HS (0x3 << 10)
+#define XDEV_SS (0x4 << 10)
+#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10))
+#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS)
+#define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS)
+#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS)
+#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS)
+/* Bits 20:23 in the Slot Context are the speed for the device */
+#define SLOT_SPEED_FS (XDEV_FS << 10)
+#define SLOT_SPEED_LS (XDEV_LS << 10)
+#define SLOT_SPEED_HS (XDEV_HS << 10)
+#define SLOT_SPEED_SS (XDEV_SS << 10)
+/* Port Indicator Control */
+#define PORT_LED_OFF (0 << 14)
+#define PORT_LED_AMBER (1 << 14)
+#define PORT_LED_GREEN (2 << 14)
+#define PORT_LED_MASK (3 << 14)
+/* Port Link State Write Strobe - set this when changing link state */
+#define PORT_LINK_STROBE (1 << 16)
+/* true: connect status change */
+#define PORT_CSC (1 << 17)
+/* true: port enable change */
+#define PORT_PEC (1 << 18)
+/* true: warm reset for a USB 3.0 device is done. A "hot" reset puts the port
+ * into an enabled state, and the device into the default state. A "warm" reset
+ * also resets the link, forcing the device through the link training sequence.
+ * SW can also look at the Port Reset register to see when warm reset is done.
+ */
+#define PORT_WRC (1 << 19)
+/* true: over-current change */
+#define PORT_OCC (1 << 20)
+/* true: reset change - 1 to 0 transition of PORT_RESET */
+#define PORT_RC (1 << 21)
+/* port link status change - set on some port link state transitions:
+ * Transition Reason
+ * ------------------------------------------------------------------------------
+ * - U3 to Resume Wakeup signaling from a device
+ * - Resume to Recovery to U0 USB 3.0 device resume
+ * - Resume to U0 USB 2.0 device resume
+ * - U3 to Recovery to U0 Software resume of USB 3.0 device complete
+ * - U3 to U0 Software resume of USB 2.0 device complete
+ * - U2 to U0 L1 resume of USB 2.1 device complete
+ * - U0 to U0 (???) L1 entry rejection by USB 2.1 device
+ * - U0 to disabled L1 entry error with USB 2.1 device
+ * - Any state to inactive Error on USB 3.0 port
+ */
+#define PORT_PLC (1 << 22)
+/* port configure error change - port failed to configure its link partner */
+#define PORT_CEC (1 << 23)
+/* bit 24 reserved */
+/* wake on connect (enable) */
+#define PORT_WKCONN_E (1 << 25)
+/* wake on disconnect (enable) */
+#define PORT_WKDISC_E (1 << 26)
+/* wake on over-current (enable) */
+#define PORT_WKOC_E (1 << 27)
+/* bits 28:29 reserved */
+/* true: device is removable - for USB 3.0 roothub emulation */
+#define PORT_DEV_REMOVE (1 << 30)
+/* Initiate a warm port reset - complete when PORT_WRC is '1' */
+#define PORT_WR (1 << 31)
+
+/* Port Power Management Status and Control - port_power_base bitmasks */
+/* Inactivity timer value for transitions into U1, in microseconds.
+ * Timeout can be up to 127us. 0xFF means an infinite timeout.
+ */
+#define PORT_U1_TIMEOUT(p) ((p) & 0xff)
+/* Inactivity timer value for transitions into U2 */
+#define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8)
+/* Bits 24:31 for port testing */
+
+
+/**
+ * struct xhci_intr_reg - Interrupt Register Set
+ * @irq_pending: IMAN - Interrupt Management Register. Used to enable
+ * interrupts and check for pending interrupts.
+ * @irq_control: IMOD - Interrupt Moderation Register.
+ * Used to throttle interrupts.
+ * @erst_size: Number of segments in the Event Ring Segment Table (ERST).
+ * @erst_base: ERST base address.
+ * @erst_dequeue: Event ring dequeue pointer.
+ *
+ * Each interrupter (defined by a MSI-X vector) has an event ring and an Event
+ * Ring Segment Table (ERST) associated with it. The event ring is comprised of
+ * multiple segments of the same size. The HC places events on the ring and
+ * "updates the Cycle bit in the TRBs to indicate to software the current
+ * position of the Enqueue Pointer." The HCD (Linux) processes those events and
+ * updates the dequeue pointer.
+ */
+struct xhci_intr_reg {
+ u32 irq_pending;
+ u32 irq_control;
+ u32 erst_size;
+ u32 rsvd;
+ u32 erst_base[2];
+ u32 erst_dequeue[2];
+};
+
+/* irq_pending bitmasks */
+#define ER_IRQ_PENDING(p) ((p) & 0x1)
+/* bits 2:31 need to be preserved */
+/* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */
+#define ER_IRQ_CLEAR(p) ((p) & 0xfffffffe)
+#define ER_IRQ_ENABLE(p) ((ER_IRQ_CLEAR(p)) | 0x2)
+#define ER_IRQ_DISABLE(p) ((ER_IRQ_CLEAR(p)) & ~(0x2))
+
+/* irq_control bitmasks */
+/* Minimum interval between interrupts (in 250ns intervals). The interval
+ * between interrupts will be longer if there are no events on the event ring.
+ * Default is 4000 (1 ms).
+ */
+#define ER_IRQ_INTERVAL_MASK (0xffff)
+/* Counter used to count down the time to the next interrupt - HW use only */
+#define ER_IRQ_COUNTER_MASK (0xffff << 16)
+
+/* erst_size bitmasks */
+/* Preserve bits 16:31 of erst_size */
+#define ERST_SIZE_MASK (0xffff << 16)
+
+/* erst_dequeue bitmasks */
+/* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
+ * where the current dequeue pointer lies. This is an optional HW hint.
+ */
+#define ERST_DESI_MASK (0x7)
+/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by
+ * a work queue (or delayed service routine)?
+ */
+#define ERST_EHB (1 << 3)
+#define ERST_PTR_MASK (0xf)
+
+/**
+ * struct xhci_run_regs
+ * @microframe_index:
+ * MFINDEX - current microframe number
+ *
+ * Section 5.5 Host Controller Runtime Registers:
+ * "Software should read and write these registers using only Dword (32 bit)
+ * or larger accesses"
+ */
+struct xhci_run_regs {
+ u32 microframe_index;
+ u32 rsvd[7];
+ struct xhci_intr_reg ir_set[128];
+};
+
+/**
+ * struct doorbell_array
+ *
+ * Section 5.6
+ */
+struct xhci_doorbell_array {
+ u32 doorbell[256];
+};
+
+#define DB_TARGET_MASK 0xFFFFFF00
+#define DB_STREAM_ID_MASK 0x0000FFFF
+#define DB_TARGET_HOST 0x0
+#define DB_STREAM_ID_HOST 0x0
+#define DB_MASK (0xff << 8)
+
+/* Endpoint Target - bits 0:7 */
+#define EPI_TO_DB(p) (((p) + 1) & 0xff)
+
+
+/**
+ * struct xhci_slot_ctx
+ * @dev_info: Route string, device speed, hub info, and last valid endpoint
+ * @dev_info2: Max exit latency for device number, root hub port number
+ * @tt_info: tt_info is used to construct split transaction tokens
+ * @dev_state: slot state and device address
+ *
+ * Slot Context - section 6.2.1.1. This assumes the HC uses 32-byte context
+ * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
+ * reserved at the end of the slot context for HC internal use.
+ */
+struct xhci_slot_ctx {
+ u32 dev_info;
+ u32 dev_info2;
+ u32 tt_info;
+ u32 dev_state;
+ /* offset 0x10 to 0x1f reserved for HC internal use */
+ u32 reserved[4];
+};
+
+/* dev_info bitmasks */
+/* Route String - 0:19 */
+#define ROUTE_STRING_MASK (0xfffff)
+/* Device speed - values defined by PORTSC Device Speed field - 20:23 */
+#define DEV_SPEED (0xf << 20)
+/* bit 24 reserved */
+/* Is this LS/FS device connected through a HS hub? - bit 25 */
+#define DEV_MTT (0x1 << 25)
+/* Set if the device is a hub - bit 26 */
+#define DEV_HUB (0x1 << 26)
+/* Index of the last valid endpoint context in this device context - 27:31 */
+#define LAST_CTX_MASK (0x1f << 27)
+#define LAST_CTX(p) ((p) << 27)
+#define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1)
+#define SLOT_FLAG (1 << 0)
+#define EP0_FLAG (1 << 1)
+
+/* dev_info2 bitmasks */
+/* Max Exit Latency (ms) - worst case time to wake up all links in dev path */
+#define MAX_EXIT (0xffff)
+/* Root hub port number that is needed to access the USB device */
+#define ROOT_HUB_PORT(p) (((p) & 0xff) << 16)
+
+/* tt_info bitmasks */
+/*
+ * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub
+ * The Slot ID of the hub that isolates the high speed signaling from
+ * this low or full-speed device. '0' if attached to root hub port.
+ */
+#define TT_SLOT (0xff)
+/*
+ * The number of the downstream facing port of the high-speed hub
+ * '0' if the device is not low or full speed.
+ */
+#define TT_PORT (0xff << 8)
+
+/* dev_state bitmasks */
+/* USB device address - assigned by the HC */
+#define DEV_ADDR_MASK (0xff)
+/* bits 8:26 reserved */
+/* Slot state */
+#define SLOT_STATE (0x1f << 27)
+#define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27)
+
+
+/**
+ * struct xhci_ep_ctx
+ * @ep_info: endpoint state, streams, mult, and interval information.
+ * @ep_info2: information on endpoint type, max packet size, max burst size,
+ * error count, and whether the HC will force an event for all
+ * transactions.
+ * @deq: 64-bit ring dequeue pointer address. If the endpoint only
+ * defines one stream, this points to the endpoint transfer ring.
+ * Otherwise, it points to a stream context array, which has a
+ * ring pointer for each flow.
+ * @tx_info:
+ * Average TRB lengths for the endpoint ring and
+ * max payload within an Endpoint Service Interval Time (ESIT).
+ *
+ * Endpoint Context - section 6.2.1.2. This assumes the HC uses 32-byte context
+ * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
+ * reserved at the end of the endpoint context for HC internal use.
+ */
+struct xhci_ep_ctx {
+ u32 ep_info;
+ u32 ep_info2;
+ u32 deq[2];
+ u32 tx_info;
+ /* offset 0x14 - 0x1f reserved for HC internal use */
+ u32 reserved[3];
+};
+
+/* ep_info bitmasks */
+/*
+ * Endpoint State - bits 0:2
+ * 0 - disabled
+ * 1 - running
+ * 2 - halted due to halt condition - ok to manipulate endpoint ring
+ * 3 - stopped
+ * 4 - TRB error
+ * 5-7 - reserved
+ */
+#define EP_STATE_MASK (0xf)
+#define EP_STATE_DISABLED 0
+#define EP_STATE_RUNNING 1
+#define EP_STATE_HALTED 2
+#define EP_STATE_STOPPED 3
+#define EP_STATE_ERROR 4
+/* Mult - Max number of burtst within an interval, in EP companion desc. */
+#define EP_MULT(p) ((p & 0x3) << 8)
+/* bits 10:14 are Max Primary Streams */
+/* bit 15 is Linear Stream Array */
+/* Interval - period between requests to an endpoint - 125u increments. */
+#define EP_INTERVAL(p) ((p & 0xff) << 16)
+
+/* ep_info2 bitmasks */
+/*
+ * Force Event - generate transfer events for all TRBs for this endpoint
+ * This will tell the HC to ignore the IOC and ISP flags (for debugging only).
+ */
+#define FORCE_EVENT (0x1)
+#define ERROR_COUNT(p) (((p) & 0x3) << 1)
+#define EP_TYPE(p) ((p) << 3)
+#define ISOC_OUT_EP 1
+#define BULK_OUT_EP 2
+#define INT_OUT_EP 3
+#define CTRL_EP 4
+#define ISOC_IN_EP 5
+#define BULK_IN_EP 6
+#define INT_IN_EP 7
+/* bit 6 reserved */
+/* bit 7 is Host Initiate Disable - for disabling stream selection */
+#define MAX_BURST(p) (((p)&0xff) << 8)
+#define MAX_PACKET(p) (((p)&0xffff) << 16)
+
+
+/**
+ * struct xhci_device_control
+ * Input/Output context; see section 6.2.5.
+ *
+ * @drop_context: set the bit of the endpoint context you want to disable
+ * @add_context: set the bit of the endpoint context you want to enable
+ */
+struct xhci_device_control {
+ u32 drop_flags;
+ u32 add_flags;
+ u32 rsvd[6];
+ struct xhci_slot_ctx slot;
+ struct xhci_ep_ctx ep[31];
+};
+
+/* drop context bitmasks */
+#define DROP_EP(x) (0x1 << x)
+/* add context bitmasks */
+#define ADD_EP(x) (0x1 << x)
+
+
+struct xhci_virt_device {
+ /*
+ * Commands to the hardware are passed an "input context" that
+ * tells the hardware what to change in its data structures.
+ * The hardware will return changes in an "output context" that
+ * software must allocate for the hardware. We need to keep
+ * track of input and output contexts separately because
+ * these commands might fail and we don't trust the hardware.
+ */
+ struct xhci_device_control *out_ctx;
+ dma_addr_t out_ctx_dma;
+ /* Used for addressing devices and configuration changes */
+ struct xhci_device_control *in_ctx;
+ dma_addr_t in_ctx_dma;
+ /* FIXME when stream support is added */
+ struct xhci_ring *ep_rings[31];
+ /* Temporary storage in case the configure endpoint command fails and we
+ * have to restore the device state to the previous state
+ */
+ struct xhci_ring *new_ep_rings[31];
+ struct completion cmd_completion;
+ /* Status of the last command issued for this device */
+ u32 cmd_status;
+};
+
+
+/**
+ * struct xhci_device_context_array
+ * @dev_context_ptr array of 64-bit DMA addresses for device contexts
+ */
+struct xhci_device_context_array {
+ /* 64-bit device addresses; we only write 32-bit addresses */
+ u32 dev_context_ptrs[2*MAX_HC_SLOTS];
+ /* private xHCD pointers */
+ dma_addr_t dma;
+};
+/* TODO: write function to set the 64-bit device DMA address */
+/*
+ * TODO: change this to be dynamically sized at HC mem init time since the HC
+ * might not be able to handle the maximum number of devices possible.
+ */
+
+
+struct xhci_stream_ctx {
+ /* 64-bit stream ring address, cycle state, and stream type */
+ u32 stream_ring[2];
+ /* offset 0x14 - 0x1f reserved for HC internal use */
+ u32 reserved[2];
+};
+
+
+struct xhci_transfer_event {
+ /* 64-bit buffer address, or immediate data */
+ u32 buffer[2];
+ u32 transfer_len;
+ /* This field is interpreted differently based on the type of TRB */
+ u32 flags;
+};
+
+/** Transfer Event bit fields **/
+#define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f)
+
+/* Completion Code - only applicable for some types of TRBs */
+#define COMP_CODE_MASK (0xff << 24)
+#define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24)
+#define COMP_SUCCESS 1
+/* Data Buffer Error */
+#define COMP_DB_ERR 2
+/* Babble Detected Error */
+#define COMP_BABBLE 3
+/* USB Transaction Error */
+#define COMP_TX_ERR 4
+/* TRB Error - some TRB field is invalid */
+#define COMP_TRB_ERR 5
+/* Stall Error - USB device is stalled */
+#define COMP_STALL 6
+/* Resource Error - HC doesn't have memory for that device configuration */
+#define COMP_ENOMEM 7
+/* Bandwidth Error - not enough room in schedule for this dev config */
+#define COMP_BW_ERR 8
+/* No Slots Available Error - HC ran out of device slots */
+#define COMP_ENOSLOTS 9
+/* Invalid Stream Type Error */
+#define COMP_STREAM_ERR 10
+/* Slot Not Enabled Error - doorbell rung for disabled device slot */
+#define COMP_EBADSLT 11
+/* Endpoint Not Enabled Error */
+#define COMP_EBADEP 12
+/* Short Packet */
+#define COMP_SHORT_TX 13
+/* Ring Underrun - doorbell rung for an empty isoc OUT ep ring */
+#define COMP_UNDERRUN 14
+/* Ring Overrun - isoc IN ep ring is empty when ep is scheduled to RX */
+#define COMP_OVERRUN 15
+/* Virtual Function Event Ring Full Error */
+#define COMP_VF_FULL 16
+/* Parameter Error - Context parameter is invalid */
+#define COMP_EINVAL 17
+/* Bandwidth Overrun Error - isoc ep exceeded its allocated bandwidth */
+#define COMP_BW_OVER 18
+/* Context State Error - illegal context state transition requested */
+#define COMP_CTX_STATE 19
+/* No Ping Response Error - HC didn't get PING_RESPONSE in time to TX */
+#define COMP_PING_ERR 20
+/* Event Ring is full */
+#define COMP_ER_FULL 21
+/* Missed Service Error - HC couldn't service an isoc ep within interval */
+#define COMP_MISSED_INT 23
+/* Successfully stopped command ring */
+#define COMP_CMD_STOP 24
+/* Successfully aborted current command and stopped command ring */
+#define COMP_CMD_ABORT 25
+/* Stopped - transfer was terminated by a stop endpoint command */
+#define COMP_STOP 26
+/* Same as COMP_EP_STOPPED, but the transfered length in the event is invalid */
+#define COMP_STOP_INVAL 27
+/* Control Abort Error - Debug Capability - control pipe aborted */
+#define COMP_DBG_ABORT 28
+/* TRB type 29 and 30 reserved */
+/* Isoc Buffer Overrun - an isoc IN ep sent more data than could fit in TD */
+#define COMP_BUFF_OVER 31
+/* Event Lost Error - xHC has an "internal event overrun condition" */
+#define COMP_ISSUES 32
+/* Undefined Error - reported when other error codes don't apply */
+#define COMP_UNKNOWN 33
+/* Invalid Stream ID Error */
+#define COMP_STRID_ERR 34
+/* Secondary Bandwidth Error - may be returned by a Configure Endpoint cmd */
+/* FIXME - check for this */
+#define COMP_2ND_BW_ERR 35
+/* Split Transaction Error */
+#define COMP_SPLIT_ERR 36
+
+struct xhci_link_trb {
+ /* 64-bit segment pointer*/
+ u32 segment_ptr[2];
+ u32 intr_target;
+ u32 control;
+};
+
+/* control bitfields */
+#define LINK_TOGGLE (0x1<<1)
+
+/* Command completion event TRB */
+struct xhci_event_cmd {
+ /* Pointer to command TRB, or the value passed by the event data trb */
+ u32 cmd_trb[2];
+ u32 status;
+ u32 flags;
+};
+
+/* flags bitmasks */
+/* bits 16:23 are the virtual function ID */
+/* bits 24:31 are the slot ID */
+#define TRB_TO_SLOT_ID(p) (((p) & (0xff<<24)) >> 24)
+#define SLOT_ID_FOR_TRB(p) (((p) & 0xff) << 24)
+
+/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */
+#define TRB_TO_EP_INDEX(p) ((((p) & (0x1f << 16)) >> 16) - 1)
+#define EP_ID_FOR_TRB(p) ((((p) + 1) & 0x1f) << 16)
+
+
+/* Port Status Change Event TRB fields */
+/* Port ID - bits 31:24 */
+#define GET_PORT_ID(p) (((p) & (0xff << 24)) >> 24)
+
+/* Normal TRB fields */
+/* transfer_len bitmasks - bits 0:16 */
+#define TRB_LEN(p) ((p) & 0x1ffff)
+/* TD size - number of bytes remaining in the TD (including this TRB):
+ * bits 17 - 21. Shift the number of bytes by 10. */
+#define TD_REMAINDER(p) ((((p) >> 10) & 0x1f) << 17)
+/* Interrupter Target - which MSI-X vector to target the completion event at */
+#define TRB_INTR_TARGET(p) (((p) & 0x3ff) << 22)
+#define GET_INTR_TARGET(p) (((p) >> 22) & 0x3ff)
+
+/* Cycle bit - indicates TRB ownership by HC or HCD */
+#define TRB_CYCLE (1<<0)
+/*
+ * Force next event data TRB to be evaluated before task switch.
+ * Used to pass OS data back after a TD completes.
+ */
+#define TRB_ENT (1<<1)
+/* Interrupt on short packet */
+#define TRB_ISP (1<<2)
+/* Set PCIe no snoop attribute */
+#define TRB_NO_SNOOP (1<<3)
+/* Chain multiple TRBs into a TD */
+#define TRB_CHAIN (1<<4)
+/* Interrupt on completion */
+#define TRB_IOC (1<<5)
+/* The buffer pointer contains immediate data */
+#define TRB_IDT (1<<6)
+
+
+/* Control transfer TRB specific fields */
+#define TRB_DIR_IN (1<<16)
+
+struct xhci_generic_trb {
+ u32 field[4];
+};
+
+union xhci_trb {
+ struct xhci_link_trb link;
+ struct xhci_transfer_event trans_event;
+ struct xhci_event_cmd event_cmd;
+ struct xhci_generic_trb generic;
+};
+
+/* TRB bit mask */
+#define TRB_TYPE_BITMASK (0xfc00)
+#define TRB_TYPE(p) ((p) << 10)
+/* TRB type IDs */
+/* bulk, interrupt, isoc scatter/gather, and control data stage */
+#define TRB_NORMAL 1
+/* setup stage for control transfers */
+#define TRB_SETUP 2
+/* data stage for control transfers */
+#define TRB_DATA 3
+/* status stage for control transfers */
+#define TRB_STATUS 4
+/* isoc transfers */
+#define TRB_ISOC 5
+/* TRB for linking ring segments */
+#define TRB_LINK 6
+#define TRB_EVENT_DATA 7
+/* Transfer Ring No-op (not for the command ring) */
+#define TRB_TR_NOOP 8
+/* Command TRBs */
+/* Enable Slot Command */
+#define TRB_ENABLE_SLOT 9
+/* Disable Slot Command */
+#define TRB_DISABLE_SLOT 10
+/* Address Device Command */
+#define TRB_ADDR_DEV 11
+/* Configure Endpoint Command */
+#define TRB_CONFIG_EP 12
+/* Evaluate Context Command */
+#define TRB_EVAL_CONTEXT 13
+/* Reset Transfer Ring Command */
+#define TRB_RESET_RING 14
+/* Stop Transfer Ring Command */
+#define TRB_STOP_RING 15
+/* Set Transfer Ring Dequeue Pointer Command */
+#define TRB_SET_DEQ 16
+/* Reset Device Command */
+#define TRB_RESET_DEV 17
+/* Force Event Command (opt) */
+#define TRB_FORCE_EVENT 18
+/* Negotiate Bandwidth Command (opt) */
+#define TRB_NEG_BANDWIDTH 19
+/* Set Latency Tolerance Value Command (opt) */
+#define TRB_SET_LT 20
+/* Get port bandwidth Command */
+#define TRB_GET_BW 21
+/* Force Header Command - generate a transaction or link management packet */
+#define TRB_FORCE_HEADER 22
+/* No-op Command - not for transfer rings */
+#define TRB_CMD_NOOP 23
+/* TRB IDs 24-31 reserved */
+/* Event TRBS */
+/* Transfer Event */
+#define TRB_TRANSFER 32
+/* Command Completion Event */
+#define TRB_COMPLETION 33
+/* Port Status Change Event */
+#define TRB_PORT_STATUS 34
+/* Bandwidth Request Event (opt) */
+#define TRB_BANDWIDTH_EVENT 35
+/* Doorbell Event (opt) */
+#define TRB_DOORBELL 36
+/* Host Controller Event */
+#define TRB_HC_EVENT 37
+/* Device Notification Event - device sent function wake notification */
+#define TRB_DEV_NOTE 38
+/* MFINDEX Wrap Event - microframe counter wrapped */
+#define TRB_MFINDEX_WRAP 39
+/* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
+
+/*
+ * TRBS_PER_SEGMENT must be a multiple of 4,
+ * since the command ring is 64-byte aligned.
+ * It must also be greater than 16.
+ */
+#define TRBS_PER_SEGMENT 64
+#define SEGMENT_SIZE (TRBS_PER_SEGMENT*16)
+/* TRB buffer pointers can't cross 64KB boundaries */
+#define TRB_MAX_BUFF_SHIFT 16
+#define TRB_MAX_BUFF_SIZE (1 << TRB_MAX_BUFF_SHIFT)
+
+struct xhci_segment {
+ union xhci_trb *trbs;
+ /* private to HCD */
+ struct xhci_segment *next;
+ dma_addr_t dma;
+};
+
+struct xhci_td {
+ struct list_head td_list;
+ struct list_head cancelled_td_list;
+ struct urb *urb;
+ struct xhci_segment *start_seg;
+ union xhci_trb *first_trb;
+ union xhci_trb *last_trb;
+};
+
+struct xhci_ring {
+ struct xhci_segment *first_seg;
+ union xhci_trb *enqueue;
+ struct xhci_segment *enq_seg;
+ unsigned int enq_updates;
+ union xhci_trb *dequeue;
+ struct xhci_segment *deq_seg;
+ unsigned int deq_updates;
+ struct list_head td_list;
+ /* ---- Related to URB cancellation ---- */
+ struct list_head cancelled_td_list;
+ unsigned int cancels_pending;
+ unsigned int state;
+#define SET_DEQ_PENDING (1 << 0)
+ /* The TRB that was last reported in a stopped endpoint ring */
+ union xhci_trb *stopped_trb;
+ struct xhci_td *stopped_td;
+ /*
+ * Write the cycle state into the TRB cycle field to give ownership of
+ * the TRB to the host controller (if we are the producer), or to check
+ * if we own the TRB (if we are the consumer). See section 4.9.1.
+ */
+ u32 cycle_state;
+};
+
+struct xhci_erst_entry {
+ /* 64-bit event ring segment address */
+ u32 seg_addr[2];
+ u32 seg_size;
+ /* Set to zero */
+ u32 rsvd;
+};
+
+struct xhci_erst {
+ struct xhci_erst_entry *entries;
+ unsigned int num_entries;
+ /* xhci->event_ring keeps track of segment dma addresses */
+ dma_addr_t erst_dma_addr;
+ /* Num entries the ERST can contain */
+ unsigned int erst_size;
+};
+
+/*
+ * Each segment table entry is 4*32bits long. 1K seems like an ok size:
+ * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
+ * meaning 64 ring segments.
+ * Initial allocated size of the ERST, in number of entries */
+#define ERST_NUM_SEGS 1
+/* Initial allocated size of the ERST, in number of entries */
+#define ERST_SIZE 64
+/* Initial number of event segment rings allocated */
+#define ERST_ENTRIES 1
+/* Poll every 60 seconds */
+#define POLL_TIMEOUT 60
+/* XXX: Make these module parameters */
+
+
+/* There is one ehci_hci structure per controller */
+struct xhci_hcd {
+ /* glue to PCI and HCD framework */
+ struct xhci_cap_regs __iomem *cap_regs;
+ struct xhci_op_regs __iomem *op_regs;
+ struct xhci_run_regs __iomem *run_regs;
+ struct xhci_doorbell_array __iomem *dba;
+ /* Our HCD's current interrupter register set */
+ struct xhci_intr_reg __iomem *ir_set;
+
+ /* Cached register copies of read-only HC data */
+ __u32 hcs_params1;
+ __u32 hcs_params2;
+ __u32 hcs_params3;
+ __u32 hcc_params;
+
+ spinlock_t lock;
+
+ /* packed release number */
+ u8 sbrn;
+ u16 hci_version;
+ u8 max_slots;
+ u8 max_interrupters;
+ u8 max_ports;
+ u8 isoc_threshold;
+ int event_ring_max;
+ int addr_64;
+ /* 4KB min, 128MB max */
+ int page_size;
+ /* Valid values are 12 to 20, inclusive */
+ int page_shift;
+ /* only one MSI vector for now, but might need more later */
+ int msix_count;
+ struct msix_entry *msix_entries;
+ /* data structures */
+ struct xhci_device_context_array *dcbaa;
+ struct xhci_ring *cmd_ring;
+ struct xhci_ring *event_ring;
+ struct xhci_erst erst;
+ /* slot enabling and address device helpers */
+ struct completion addr_dev;
+ int slot_id;
+ /* Internal mirror of the HW's dcbaa */
+ struct xhci_virt_device *devs[MAX_HC_SLOTS];
+
+ /* DMA pools */
+ struct dma_pool *device_pool;
+ struct dma_pool *segment_pool;
+
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+ /* Poll the rings - for debugging */
+ struct timer_list event_ring_timer;
+ int zombie;
+#endif
+ /* Statistics */
+ int noops_submitted;
+ int noops_handled;
+ int error_bitmask;
+};
+
+/* For testing purposes */
+#define NUM_TEST_NOOPS 0
+
+/* convert between an HCD pointer and the corresponding EHCI_HCD */
+static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd)
+{
+ return (struct xhci_hcd *) (hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
+{
+ return container_of((void *) xhci, struct usb_hcd, hcd_priv);
+}
+
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+#define XHCI_DEBUG 1
+#else
+#define XHCI_DEBUG 0
+#endif
+
+#define xhci_dbg(xhci, fmt, args...) \
+ do { if (XHCI_DEBUG) dev_dbg(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0)
+#define xhci_info(xhci, fmt, args...) \
+ do { if (XHCI_DEBUG) dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0)
+#define xhci_err(xhci, fmt, args...) \
+ dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+#define xhci_warn(xhci, fmt, args...) \
+ dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+
+/* TODO: copied from ehci.h - can be refactored? */
+/* xHCI spec says all registers are little endian */
+static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
+ __u32 __iomem *regs)
+{
+ return readl(regs);
+}
+static inline void xhci_writel(struct xhci_hcd *xhci,
+ const unsigned int val, __u32 __iomem *regs)
+{
+ if (!in_interrupt())
+ xhci_dbg(xhci,
+ "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
+ regs, val);
+ writel(val, regs);
+}
+
+/* xHCI debugging */
+void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num);
+void xhci_print_registers(struct xhci_hcd *xhci);
+void xhci_dbg_regs(struct xhci_hcd *xhci);
+void xhci_print_run_regs(struct xhci_hcd *xhci);
+void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb);
+void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb);
+void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg);
+void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring);
+void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
+void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
+void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
+void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep);
+
+/* xHCI memory managment */
+void xhci_mem_cleanup(struct xhci_hcd *xhci);
+int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
+void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
+int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
+int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
+unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
+unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
+void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
+int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
+ struct usb_device *udev, struct usb_host_endpoint *ep,
+ gfp_t mem_flags);
+void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
+
+#ifdef CONFIG_PCI
+/* xHCI PCI glue */
+int xhci_register_pci(void);
+void xhci_unregister_pci(void);
+#endif
+
+/* xHCI host controller glue */
+int xhci_halt(struct xhci_hcd *xhci);
+int xhci_reset(struct xhci_hcd *xhci);
+int xhci_init(struct usb_hcd *hcd);
+int xhci_run(struct usb_hcd *hcd);
+void xhci_stop(struct usb_hcd *hcd);
+void xhci_shutdown(struct usb_hcd *hcd);
+int xhci_get_frame(struct usb_hcd *hcd);
+irqreturn_t xhci_irq(struct usb_hcd *hcd);
+int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
+void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
+int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
+int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
+int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
+int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
+void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
+
+/* xHCI ring, segment, TRB, and TD functions */
+dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
+void xhci_ring_cmd_db(struct xhci_hcd *xhci);
+void *xhci_setup_one_noop(struct xhci_hcd *xhci);
+void xhci_handle_event(struct xhci_hcd *xhci);
+void xhci_set_hc_event_deq(struct xhci_hcd *xhci);
+int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
+int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+ u32 slot_id);
+int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
+ unsigned int ep_index);
+int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
+ int slot_id, unsigned int ep_index);
+int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
+ int slot_id, unsigned int ep_index);
+int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+ u32 slot_id);
+
+/* xHCI roothub code */
+int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
+ char *buf, u16 wLength);
+int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+
+#endif /* __LINUX_XHCI_HCD_H */
diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig
index 7603cbe0865..30ea7ca6846 100644
--- a/drivers/usb/misc/sisusbvga/Kconfig
+++ b/drivers/usb/misc/sisusbvga/Kconfig
@@ -1,7 +1,7 @@
config USB_SISUSBVGA
tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)"
- depends on USB && USB_EHCI_HCD
+ depends on USB && (USB_MUSB_HDRC || USB_EHCI_HCD)
---help---
Say Y here if you intend to attach a USB2VGA dongle based on a
Net2280 and a SiS315 chip.
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 5f1a19d1497..a9f06d76960 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1072,23 +1072,34 @@ static int unlink1 (struct usbtest_dev *dev, int pipe, int size, int async)
*/
msleep (jiffies % (2 * INTERRUPT_RATE));
if (async) {
-retry:
- retval = usb_unlink_urb (urb);
- if (retval == -EBUSY || retval == -EIDRM) {
- /* we can't unlink urbs while they're completing.
- * or if they've completed, and we haven't resubmitted.
- * "normal" drivers would prevent resubmission, but
- * since we're testing unlink paths, we can't.
- */
- ERROR(dev, "unlink retry\n");
- goto retry;
+ while (!completion_done(&completion)) {
+ retval = usb_unlink_urb(urb);
+
+ switch (retval) {
+ case -EBUSY:
+ case -EIDRM:
+ /* we can't unlink urbs while they're completing
+ * or if they've completed, and we haven't
+ * resubmitted. "normal" drivers would prevent
+ * resubmission, but since we're testing unlink
+ * paths, we can't.
+ */
+ ERROR(dev, "unlink retry\n");
+ continue;
+ case 0:
+ case -EINPROGRESS:
+ break;
+
+ default:
+ dev_err(&dev->intf->dev,
+ "unlink fail %d\n", retval);
+ return retval;
+ }
+
+ break;
}
} else
usb_kill_urb (urb);
- if (!(retval == 0 || retval == -EINPROGRESS)) {
- dev_err(&dev->intf->dev, "unlink fail %d\n", retval);
- return retval;
- }
wait_for_completion (&completion);
retval = urb->status;
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index 1f715436d6d..a7eb4c99342 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -733,7 +733,7 @@ int __init mon_text_init(void)
{
struct dentry *mondir;
- mondir = debugfs_create_dir("usbmon", NULL);
+ mondir = debugfs_create_dir("usbmon", usb_debug_root);
if (IS_ERR(mondir)) {
printk(KERN_NOTICE TAG ": debugfs is not available\n");
return -ENODEV;
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index b66e8544d8b..70073b157f0 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -10,6 +10,7 @@ comment "Enable Host or Gadget support to see Inventra options"
config USB_MUSB_HDRC
depends on (USB || USB_GADGET) && HAVE_CLK
depends on !SUPERH
+ select NOP_USB_XCEIV if ARCH_DAVINCI
select TWL4030_USB if MACH_OMAP_3430SDP
select USB_OTG_UTILS
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
@@ -55,6 +56,7 @@ comment "Blackfin high speed USB Support"
config USB_TUSB6010
boolean "TUSB 6010 support"
depends on USB_MUSB_HDRC && !USB_MUSB_SOC
+ select NOP_USB_XCEIV
default y
help
The TUSB 6010 chip, from Texas Instruments, connects a discrete
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 78613485209..f2f66ebc736 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -143,7 +143,7 @@ static void musb_conn_timer_handler(unsigned long _musb)
u16 val;
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_IDLE:
case OTG_STATE_A_WAIT_BCON:
/* Start a new session */
@@ -154,7 +154,7 @@ static void musb_conn_timer_handler(unsigned long _musb)
val = musb_readw(musb->mregs, MUSB_DEVCTL);
if (!(val & MUSB_DEVCTL_BDEVICE)) {
gpio_set_value(musb->config->gpio_vrsel, 1);
- musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
} else {
gpio_set_value(musb->config->gpio_vrsel, 0);
@@ -247,6 +247,11 @@ int __init musb_platform_init(struct musb *musb)
}
gpio_direction_output(musb->config->gpio_vrsel, 0);
+ usb_nop_xceiv_register();
+ musb->xceiv = otg_get_transceiver();
+ if (!musb->xceiv)
+ return -ENODEV;
+
if (ANOMALY_05000346) {
bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
SSYNC();
@@ -291,7 +296,7 @@ int __init musb_platform_init(struct musb *musb)
musb_conn_timer_handler, (unsigned long) musb);
}
if (is_peripheral_enabled(musb))
- musb->xceiv.set_power = bfin_set_power;
+ musb->xceiv->set_power = bfin_set_power;
musb->isr = blackfin_interrupt;
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 1976e9b4180..c3577bbbae6 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -6,6 +6,7 @@
* The TUSB6020, using VLYNQ, has CPPI that looks much like DaVinci.
*/
+#include <linux/platform_device.h>
#include <linux/usb.h>
#include "musb_core.h"
@@ -1145,17 +1146,27 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch)
return completed;
}
-void cppi_completion(struct musb *musb, u32 rx, u32 tx)
+irqreturn_t cppi_interrupt(int irq, void *dev_id)
{
- void __iomem *tibase;
- int i, index;
+ struct musb *musb = dev_id;
struct cppi *cppi;
+ void __iomem *tibase;
struct musb_hw_ep *hw_ep = NULL;
+ u32 rx, tx;
+ int i, index;
cppi = container_of(musb->dma_controller, struct cppi, controller);
tibase = musb->ctrl_base;
+ tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
+ rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
+
+ if (!tx && !rx)
+ return IRQ_NONE;
+
+ DBG(4, "CPPI IRQ Tx%x Rx%x\n", tx, rx);
+
/* process TX channels */
for (index = 0; tx; tx = tx >> 1, index++) {
struct cppi_channel *tx_ch;
@@ -1273,6 +1284,8 @@ void cppi_completion(struct musb *musb, u32 rx, u32 tx)
/* write to CPPI EOI register to re-enable interrupts */
musb_writel(tibase, DAVINCI_CPPI_EOI_REG, 0);
+
+ return IRQ_HANDLED;
}
/* Instantiate a software object representing a DMA controller. */
@@ -1280,6 +1293,9 @@ struct dma_controller *__init
dma_controller_create(struct musb *musb, void __iomem *mregs)
{
struct cppi *controller;
+ struct device *dev = musb->controller;
+ struct platform_device *pdev = to_platform_device(dev);
+ int irq = platform_get_irq(pdev, 1);
controller = kzalloc(sizeof *controller, GFP_KERNEL);
if (!controller)
@@ -1310,6 +1326,15 @@ dma_controller_create(struct musb *musb, void __iomem *mregs)
return NULL;
}
+ if (irq > 0) {
+ if (request_irq(irq, cppi_interrupt, 0, "cppi-dma", musb)) {
+ dev_err(dev, "request_irq %d failed!\n", irq);
+ dma_controller_destroy(&controller->controller);
+ return NULL;
+ }
+ controller->irq = irq;
+ }
+
return &controller->controller;
}
@@ -1322,6 +1347,9 @@ void dma_controller_destroy(struct dma_controller *c)
cppi = container_of(c, struct cppi, controller);
+ if (cppi->irq)
+ free_irq(cppi->irq, cppi->musb);
+
/* assert: caller stopped the controller first */
dma_pool_destroy(cppi->pool);
diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h
index 729b4071787..8a39de3e6e4 100644
--- a/drivers/usb/musb/cppi_dma.h
+++ b/drivers/usb/musb/cppi_dma.h
@@ -119,6 +119,8 @@ struct cppi {
void __iomem *mregs; /* Mentor regs */
void __iomem *tibase; /* TI/CPPI regs */
+ int irq;
+
struct cppi_channel tx[4];
struct cppi_channel rx[4];
@@ -127,7 +129,7 @@ struct cppi {
struct list_head tx_complete;
};
-/* irq handling hook */
-extern void cppi_completion(struct musb *, u32 rx, u32 tx);
+/* CPPI IRQ handler */
+extern irqreturn_t cppi_interrupt(int, void *);
#endif /* end of ifndef _CPPI_DMA_H_ */
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 10d11ab113a..180d7daa409 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -215,7 +215,7 @@ static void otg_timer(unsigned long _musb)
DBG(7, "poll devctl %02x (%s)\n", devctl, otg_state_string(musb));
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_WAIT_VFALL:
/* Wait till VBUS falls below SessionEnd (~0.2V); the 1.3 RTL
* seems to mis-handle session "start" otherwise (or in our
@@ -226,7 +226,7 @@ static void otg_timer(unsigned long _musb)
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
break;
}
- musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT);
break;
@@ -251,7 +251,7 @@ static void otg_timer(unsigned long _musb)
if (devctl & MUSB_DEVCTL_BDEVICE)
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
else
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
break;
default:
break;
@@ -265,6 +265,7 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
irqreturn_t retval = IRQ_NONE;
struct musb *musb = __hci;
void __iomem *tibase = musb->ctrl_base;
+ struct cppi *cppi;
u32 tmp;
spin_lock_irqsave(&musb->lock, flags);
@@ -281,16 +282,9 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
/* CPPI interrupts share the same IRQ line, but have their own
* mask, state, "vector", and EOI registers.
*/
- if (is_cppi_enabled()) {
- u32 cppi_tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
- u32 cppi_rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
-
- if (cppi_tx || cppi_rx) {
- DBG(4, "CPPI IRQ t%x r%x\n", cppi_tx, cppi_rx);
- cppi_completion(musb, cppi_rx, cppi_tx);
- retval = IRQ_HANDLED;
- }
- }
+ cppi = container_of(musb->dma_controller, struct cppi, controller);
+ if (is_cppi_enabled() && musb->dma_controller && !cppi->irq)
+ retval = cppi_interrupt(irq, __hci);
/* ack and handle non-CPPI interrupts */
tmp = musb_readl(tibase, DAVINCI_USB_INT_SRC_MASKED_REG);
@@ -331,21 +325,21 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
* to stop registering in devctl.
*/
musb->int_usb &= ~MUSB_INTR_VBUSERROR;
- musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
WARNING("VBUS error workaround (delay coming)\n");
} else if (is_host_enabled(musb) && drvvbus) {
musb->is_active = 1;
MUSB_HST_MODE(musb);
- musb->xceiv.default_a = 1;
- musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->default_a = 1;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
del_timer(&otg_workaround);
} else {
musb->is_active = 0;
MUSB_DEV_MODE(musb);
- musb->xceiv.default_a = 0;
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->default_a = 0;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
}
@@ -367,17 +361,12 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
/* poll for ID change */
if (is_otg_enabled(musb)
- && musb->xceiv.state == OTG_STATE_B_IDLE)
+ && musb->xceiv->state == OTG_STATE_B_IDLE)
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
spin_unlock_irqrestore(&musb->lock, flags);
- /* REVISIT we sometimes get unhandled IRQs
- * (e.g. ep0). not clear why...
- */
- if (retval != IRQ_HANDLED)
- DBG(5, "unhandled? %08x\n", tmp);
- return IRQ_HANDLED;
+ return retval;
}
int musb_platform_set_mode(struct musb *musb, u8 mode)
@@ -391,6 +380,11 @@ int __init musb_platform_init(struct musb *musb)
void __iomem *tibase = musb->ctrl_base;
u32 revision;
+ usb_nop_xceiv_register();
+ musb->xceiv = otg_get_transceiver();
+ if (!musb->xceiv)
+ return -ENODEV;
+
musb->mregs += DAVINCI_BASE_OFFSET;
clk_enable(musb->clock);
@@ -398,7 +392,7 @@ int __init musb_platform_init(struct musb *musb)
/* returns zero if e.g. not clocked */
revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
if (revision == 0)
- return -ENODEV;
+ goto fail;
if (is_host_enabled(musb))
setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
@@ -432,6 +426,10 @@ int __init musb_platform_init(struct musb *musb)
musb->isr = davinci_interrupt;
return 0;
+
+fail:
+ usb_nop_xceiv_unregister();
+ return -ENODEV;
}
int musb_platform_exit(struct musb *musb)
@@ -442,7 +440,7 @@ int musb_platform_exit(struct musb *musb)
davinci_source_power(musb, 0 /*off*/, 1);
/* delay, to avoid problems with module reload */
- if (is_host_enabled(musb) && musb->xceiv.default_a) {
+ if (is_host_enabled(musb) && musb->xceiv->default_a) {
int maxdelay = 30;
u8 devctl, warn = 0;
@@ -471,5 +469,7 @@ int musb_platform_exit(struct musb *musb)
clk_disable(musb->clock);
+ usb_nop_xceiv_unregister();
+
return 0;
}
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 4000cf6d1e8..554a414f65d 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -112,6 +112,7 @@
#include "davinci.h"
#endif
+#define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON)
unsigned musb_debug;
@@ -267,7 +268,7 @@ void musb_load_testpacket(struct musb *musb)
const char *otg_state_string(struct musb *musb)
{
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_IDLE: return "a_idle";
case OTG_STATE_A_WAIT_VRISE: return "a_wait_vrise";
case OTG_STATE_A_WAIT_BCON: return "a_wait_bcon";
@@ -288,12 +289,6 @@ const char *otg_state_string(struct musb *musb)
#ifdef CONFIG_USB_MUSB_OTG
/*
- * See also USB_OTG_1-3.pdf 6.6.5 Timers
- * REVISIT: Are the other timers done in the hardware?
- */
-#define TB_ASE0_BRST 100 /* Min 3.125 ms */
-
-/*
* Handles OTG hnp timeouts, such as b_ase0_brst
*/
void musb_otg_timer_func(unsigned long data)
@@ -302,16 +297,18 @@ void musb_otg_timer_func(unsigned long data)
unsigned long flags;
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_B_WAIT_ACON:
DBG(1, "HNP: b_wait_acon timeout; back to b_peripheral\n");
musb_g_disconnect(musb);
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
musb->is_active = 0;
break;
+ case OTG_STATE_A_SUSPEND:
case OTG_STATE_A_WAIT_BCON:
- DBG(1, "HNP: a_wait_bcon timeout; back to a_host\n");
- musb_hnp_stop(musb);
+ DBG(1, "HNP: %s timeout\n", otg_state_string(musb));
+ musb_set_vbus(musb, 0);
+ musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
break;
default:
DBG(1, "HNP: Unhandled mode %s\n", otg_state_string(musb));
@@ -320,10 +317,8 @@ void musb_otg_timer_func(unsigned long data)
spin_unlock_irqrestore(&musb->lock, flags);
}
-static DEFINE_TIMER(musb_otg_timer, musb_otg_timer_func, 0, 0);
-
/*
- * Stops the B-device HNP state. Caller must take care of locking.
+ * Stops the HNP transition. Caller must take care of locking.
*/
void musb_hnp_stop(struct musb *musb)
{
@@ -331,20 +326,17 @@ void musb_hnp_stop(struct musb *musb)
void __iomem *mbase = musb->mregs;
u8 reg;
- switch (musb->xceiv.state) {
+ DBG(1, "HNP: stop from %s\n", otg_state_string(musb));
+
+ switch (musb->xceiv->state) {
case OTG_STATE_A_PERIPHERAL:
- case OTG_STATE_A_WAIT_VFALL:
- case OTG_STATE_A_WAIT_BCON:
- DBG(1, "HNP: Switching back to A-host\n");
musb_g_disconnect(musb);
- musb->xceiv.state = OTG_STATE_A_IDLE;
- MUSB_HST_MODE(musb);
- musb->is_active = 0;
+ DBG(1, "HNP: back to %s\n", otg_state_string(musb));
break;
case OTG_STATE_B_HOST:
DBG(1, "HNP: Disabling HR\n");
hcd->self.is_b_host = 0;
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
MUSB_DEV_MODE(musb);
reg = musb_readb(mbase, MUSB_POWER);
reg |= MUSB_POWER_SUSPENDM;
@@ -402,7 +394,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
if (devctl & MUSB_DEVCTL_HM) {
#ifdef CONFIG_USB_MUSB_HDRC_HCD
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_SUSPEND:
/* remote wakeup? later, GetPortStatus
* will stop RESUME signaling
@@ -425,12 +417,12 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
musb->rh_timer = jiffies
+ msecs_to_jiffies(20);
- musb->xceiv.state = OTG_STATE_A_HOST;
+ musb->xceiv->state = OTG_STATE_A_HOST;
musb->is_active = 1;
usb_hcd_resume_root_hub(musb_to_hcd(musb));
break;
case OTG_STATE_B_WAIT_ACON:
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
musb->is_active = 1;
MUSB_DEV_MODE(musb);
break;
@@ -441,11 +433,11 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
}
#endif
} else {
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
#ifdef CONFIG_USB_MUSB_HDRC_HCD
case OTG_STATE_A_SUSPEND:
/* possibly DISCONNECT is upcoming */
- musb->xceiv.state = OTG_STATE_A_HOST;
+ musb->xceiv->state = OTG_STATE_A_HOST;
usb_hcd_resume_root_hub(musb_to_hcd(musb));
break;
#endif
@@ -490,7 +482,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
*/
musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
musb->ep0_stage = MUSB_EP0_START;
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
MUSB_HST_MODE(musb);
musb_set_vbus(musb, 1);
@@ -516,7 +508,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
* REVISIT: do delays from lots of DEBUG_KERNEL checks
* make trouble here, keeping VBUS < 4.4V ?
*/
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_HOST:
/* recovery is dicey once we've gotten past the
* initial stages of enumeration, but if VBUS
@@ -594,37 +586,40 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
if (devctl & MUSB_DEVCTL_LSDEV)
musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
- if (hcd->status_urb)
- usb_hcd_poll_rh_status(hcd);
- else
- usb_hcd_resume_root_hub(hcd);
-
- MUSB_HST_MODE(musb);
-
/* indicate new connection to OTG machine */
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_B_PERIPHERAL:
if (int_usb & MUSB_INTR_SUSPEND) {
DBG(1, "HNP: SUSPEND+CONNECT, now b_host\n");
- musb->xceiv.state = OTG_STATE_B_HOST;
- hcd->self.is_b_host = 1;
int_usb &= ~MUSB_INTR_SUSPEND;
+ goto b_host;
} else
DBG(1, "CONNECT as b_peripheral???\n");
break;
case OTG_STATE_B_WAIT_ACON:
- DBG(1, "HNP: Waiting to switch to b_host state\n");
- musb->xceiv.state = OTG_STATE_B_HOST;
+ DBG(1, "HNP: CONNECT, now b_host\n");
+b_host:
+ musb->xceiv->state = OTG_STATE_B_HOST;
hcd->self.is_b_host = 1;
+ musb->ignore_disconnect = 0;
+ del_timer(&musb->otg_timer);
break;
default:
if ((devctl & MUSB_DEVCTL_VBUS)
== (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
- musb->xceiv.state = OTG_STATE_A_HOST;
+ musb->xceiv->state = OTG_STATE_A_HOST;
hcd->self.is_b_host = 0;
}
break;
}
+
+ /* poke the root hub */
+ MUSB_HST_MODE(musb);
+ if (hcd->status_urb)
+ usb_hcd_poll_rh_status(hcd);
+ else
+ usb_hcd_resume_root_hub(hcd);
+
DBG(1, "CONNECT (%s) devctl %02x\n",
otg_state_string(musb), devctl);
}
@@ -650,7 +645,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
}
} else if (is_peripheral_capable()) {
DBG(1, "BUS RESET as %s\n", otg_state_string(musb));
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
#ifdef CONFIG_USB_OTG
case OTG_STATE_A_SUSPEND:
/* We need to ignore disconnect on suspend
@@ -661,24 +656,27 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
musb_g_reset(musb);
/* FALLTHROUGH */
case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */
- DBG(1, "HNP: Setting timer as %s\n",
- otg_state_string(musb));
- musb_otg_timer.data = (unsigned long)musb;
- mod_timer(&musb_otg_timer, jiffies
- + msecs_to_jiffies(100));
+ /* never use invalid T(a_wait_bcon) */
+ DBG(1, "HNP: in %s, %d msec timeout\n",
+ otg_state_string(musb),
+ TA_WAIT_BCON(musb));
+ mod_timer(&musb->otg_timer, jiffies
+ + msecs_to_jiffies(TA_WAIT_BCON(musb)));
break;
case OTG_STATE_A_PERIPHERAL:
- musb_hnp_stop(musb);
+ musb->ignore_disconnect = 0;
+ del_timer(&musb->otg_timer);
+ musb_g_reset(musb);
break;
case OTG_STATE_B_WAIT_ACON:
DBG(1, "HNP: RESET (%s), to b_peripheral\n",
otg_state_string(musb));
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
musb_g_reset(musb);
break;
#endif
case OTG_STATE_B_IDLE:
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
/* FALLTHROUGH */
case OTG_STATE_B_PERIPHERAL:
musb_g_reset(musb);
@@ -763,7 +761,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
MUSB_MODE(musb), devctl);
handled = IRQ_HANDLED;
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
#ifdef CONFIG_USB_MUSB_HDRC_HCD
case OTG_STATE_A_HOST:
case OTG_STATE_A_SUSPEND:
@@ -776,7 +774,16 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
#endif /* HOST */
#ifdef CONFIG_USB_MUSB_OTG
case OTG_STATE_B_HOST:
- musb_hnp_stop(musb);
+ /* REVISIT this behaves for "real disconnect"
+ * cases; make sure the other transitions from
+ * from B_HOST act right too. The B_HOST code
+ * in hnp_stop() is currently not used...
+ */
+ musb_root_disconnect(musb);
+ musb_to_hcd(musb)->self.is_b_host = 0;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+ MUSB_DEV_MODE(musb);
+ musb_g_disconnect(musb);
break;
case OTG_STATE_A_PERIPHERAL:
musb_hnp_stop(musb);
@@ -805,26 +812,35 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
otg_state_string(musb), devctl, power);
handled = IRQ_HANDLED;
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
#ifdef CONFIG_USB_MUSB_OTG
case OTG_STATE_A_PERIPHERAL:
- /*
- * We cannot stop HNP here, devctl BDEVICE might be
- * still set.
+ /* We also come here if the cable is removed, since
+ * this silicon doesn't report ID-no-longer-grounded.
+ *
+ * We depend on T(a_wait_bcon) to shut us down, and
+ * hope users don't do anything dicey during this
+ * undesired detour through A_WAIT_BCON.
*/
+ musb_hnp_stop(musb);
+ usb_hcd_resume_root_hub(musb_to_hcd(musb));
+ musb_root_disconnect(musb);
+ musb_platform_try_idle(musb, jiffies
+ + msecs_to_jiffies(musb->a_wait_bcon
+ ? : OTG_TIME_A_WAIT_BCON));
break;
#endif
case OTG_STATE_B_PERIPHERAL:
musb_g_suspend(musb);
musb->is_active = is_otg_enabled(musb)
- && musb->xceiv.gadget->b_hnp_enable;
+ && musb->xceiv->gadget->b_hnp_enable;
if (musb->is_active) {
#ifdef CONFIG_USB_MUSB_OTG
- musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+ musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
DBG(1, "HNP: Setting timer for b_ase0_brst\n");
- musb_otg_timer.data = (unsigned long)musb;
- mod_timer(&musb_otg_timer, jiffies
- + msecs_to_jiffies(TB_ASE0_BRST));
+ mod_timer(&musb->otg_timer, jiffies
+ + msecs_to_jiffies(
+ OTG_TIME_B_ASE0_BRST));
#endif
}
break;
@@ -834,9 +850,9 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
+ msecs_to_jiffies(musb->a_wait_bcon));
break;
case OTG_STATE_A_HOST:
- musb->xceiv.state = OTG_STATE_A_SUSPEND;
+ musb->xceiv->state = OTG_STATE_A_SUSPEND;
musb->is_active = is_otg_enabled(musb)
- && musb->xceiv.host->b_hnp_enable;
+ && musb->xceiv->host->b_hnp_enable;
break;
case OTG_STATE_B_HOST:
/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
@@ -1068,14 +1084,13 @@ static struct fifo_cfg __initdata mode_4_cfg[] = {
{ .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 512, },
-{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 512, },
-{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 512, },
-{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 512, },
-{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 512, },
-{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 512, },
-{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 512, },
-{ .hw_ep_num = 13, .style = FIFO_TX, .maxpacket = 512, },
-{ .hw_ep_num = 13, .style = FIFO_RX, .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 256, },
+{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 64, },
+{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 256, },
+{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 64, },
+{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 256, },
+{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 64, },
+{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 4096, },
{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
};
@@ -1335,11 +1350,11 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
}
if (reg & MUSB_CONFIGDATA_HBRXE) {
strcat(aInfo, ", HB-ISO Rx");
- strcat(aInfo, " (X)"); /* no driver support */
+ musb->hb_iso_rx = true;
}
if (reg & MUSB_CONFIGDATA_HBTXE) {
strcat(aInfo, ", HB-ISO Tx");
- strcat(aInfo, " (X)"); /* no driver support */
+ musb->hb_iso_tx = true;
}
if (reg & MUSB_CONFIGDATA_SOFTCONE)
strcat(aInfo, ", SoftConn");
@@ -1481,13 +1496,7 @@ static irqreturn_t generic_interrupt(int irq, void *__hci)
spin_unlock_irqrestore(&musb->lock, flags);
- /* REVISIT we sometimes get spurious IRQs on g_ep0
- * not clear why...
- */
- if (retval != IRQ_HANDLED)
- DBG(5, "spurious?\n");
-
- return IRQ_HANDLED;
+ return retval;
}
#else
@@ -1687,8 +1696,9 @@ musb_vbus_store(struct device *dev, struct device_attribute *attr,
}
spin_lock_irqsave(&musb->lock, flags);
- musb->a_wait_bcon = val;
- if (musb->xceiv.state == OTG_STATE_A_WAIT_BCON)
+ /* force T(a_wait_bcon) to be zero/unlimited *OR* valid */
+ musb->a_wait_bcon = val ? max_t(int, val, OTG_TIME_A_WAIT_BCON) : 0 ;
+ if (musb->xceiv->state == OTG_STATE_A_WAIT_BCON)
musb->is_active = 0;
musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
spin_unlock_irqrestore(&musb->lock, flags);
@@ -1706,10 +1716,13 @@ musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
spin_lock_irqsave(&musb->lock, flags);
val = musb->a_wait_bcon;
+ /* FIXME get_vbus_status() is normally #defined as false...
+ * and is effectively TUSB-specific.
+ */
vbus = musb_platform_get_vbus_status(musb);
spin_unlock_irqrestore(&musb->lock, flags);
- return sprintf(buf, "Vbus %s, timeout %lu\n",
+ return sprintf(buf, "Vbus %s, timeout %lu msec\n",
vbus ? "on" : "off", val);
}
static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store);
@@ -1749,8 +1762,8 @@ static void musb_irq_work(struct work_struct *data)
struct musb *musb = container_of(data, struct musb, irq_work);
static int old_state;
- if (musb->xceiv.state != old_state) {
- old_state = musb->xceiv.state;
+ if (musb->xceiv->state != old_state) {
+ old_state = musb->xceiv->state;
sysfs_notify(&musb->controller->kobj, NULL, "mode");
}
}
@@ -1782,6 +1795,7 @@ allocate_instance(struct device *dev,
hcd->uses_new_polling = 1;
musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+ musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
#else
musb = kzalloc(sizeof *musb, GFP_KERNEL);
if (!musb)
@@ -1847,7 +1861,7 @@ static void musb_free(struct musb *musb)
}
#ifdef CONFIG_USB_MUSB_OTG
- put_device(musb->xceiv.dev);
+ put_device(musb->xceiv->dev);
#endif
#ifdef CONFIG_USB_MUSB_HDRC_HCD
@@ -1928,10 +1942,18 @@ bad_config:
}
}
- /* assume vbus is off */
-
- /* platform adjusts musb->mregs and musb->isr if needed,
- * and activates clocks
+ /* The musb_platform_init() call:
+ * - adjusts musb->mregs and musb->isr if needed,
+ * - may initialize an integrated tranceiver
+ * - initializes musb->xceiv, usually by otg_get_transceiver()
+ * - activates clocks.
+ * - stops powering VBUS
+ * - assigns musb->board_set_vbus if host mode is enabled
+ *
+ * There are various transciever configurations. Blackfin,
+ * DaVinci, TUSB60x0, and others integrate them. OMAP3 uses
+ * external/discrete ones in various flavors (twl4030 family,
+ * isp1504, non-OTG, etc) mostly hooking up through ULPI.
*/
musb->isr = generic_interrupt;
status = musb_platform_init(musb);
@@ -1968,6 +1990,10 @@ bad_config:
if (status < 0)
goto fail2;
+#ifdef CONFIG_USB_OTG
+ setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
+#endif
+
/* Init IRQ workqueue before request_irq */
INIT_WORK(&musb->irq_work, musb_irq_work);
@@ -1999,17 +2025,17 @@ bad_config:
? "DMA" : "PIO",
musb->nIrq);
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
- /* host side needs more setup, except for no-host modes */
- if (musb->board_mode != MUSB_PERIPHERAL) {
+ /* host side needs more setup */
+ if (is_host_enabled(musb)) {
struct usb_hcd *hcd = musb_to_hcd(musb);
- if (musb->board_mode == MUSB_OTG)
+ otg_set_host(musb->xceiv, &hcd->self);
+
+ if (is_otg_enabled(musb))
hcd->self.otg_port = 1;
- musb->xceiv.host = &hcd->self;
+ musb->xceiv->host = &hcd->self;
hcd->power_budget = 2 * (plat->power ? : 250);
}
-#endif /* CONFIG_USB_MUSB_HDRC_HCD */
/* For the host-only role, we can activate right away.
* (We expect the ID pin to be forcibly grounded!!)
@@ -2017,8 +2043,8 @@ bad_config:
*/
if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
MUSB_HST_MODE(musb);
- musb->xceiv.default_a = 1;
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->default_a = 1;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
if (status)
@@ -2033,8 +2059,8 @@ bad_config:
} else /* peripheral is enabled */ {
MUSB_DEV_MODE(musb);
- musb->xceiv.default_a = 0;
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->default_a = 0;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
status = musb_gadget_setup(musb);
if (status)
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index efb39b5e55b..f3772ca3b2c 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -40,6 +40,7 @@
#include <linux/interrupt.h>
#include <linux/smp_lock.h>
#include <linux/errno.h>
+#include <linux/timer.h>
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/usb/ch9.h>
@@ -171,7 +172,8 @@ enum musb_h_ep0_state {
/* peripheral side ep0 states */
enum musb_g_ep0_state {
- MUSB_EP0_STAGE_SETUP, /* idle, waiting for setup */
+ MUSB_EP0_STAGE_IDLE, /* idle, waiting for SETUP */
+ MUSB_EP0_STAGE_SETUP, /* received SETUP */
MUSB_EP0_STAGE_TX, /* IN data */
MUSB_EP0_STAGE_RX, /* OUT data */
MUSB_EP0_STAGE_STATUSIN, /* (after OUT data) */
@@ -179,10 +181,15 @@ enum musb_g_ep0_state {
MUSB_EP0_STAGE_ACKWAIT, /* after zlp, before statusin */
} __attribute__ ((packed));
-/* OTG protocol constants */
+/*
+ * OTG protocol constants. See USB OTG 1.3 spec,
+ * sections 5.5 "Device Timings" and 6.6.5 "Timers".
+ */
#define OTG_TIME_A_WAIT_VRISE 100 /* msec (max) */
-#define OTG_TIME_A_WAIT_BCON 0 /* 0=infinite; min 1000 msec */
-#define OTG_TIME_A_IDLE_BDIS 200 /* msec (min) */
+#define OTG_TIME_A_WAIT_BCON 1100 /* min 1 second */
+#define OTG_TIME_A_AIDL_BDIS 200 /* min 200 msec */
+#define OTG_TIME_B_ASE0_BRST 100 /* min 3.125 ms */
+
/*************************** REGISTER ACCESS ********************************/
@@ -331,6 +338,8 @@ struct musb {
struct list_head control; /* of musb_qh */
struct list_head in_bulk; /* of musb_qh */
struct list_head out_bulk; /* of musb_qh */
+
+ struct timer_list otg_timer;
#endif
/* called with IRQs blocked; ON/nonzero implies starting a session,
@@ -355,7 +364,7 @@ struct musb {
u16 int_rx;
u16 int_tx;
- struct otg_transceiver xceiv;
+ struct otg_transceiver *xceiv;
int nIrq;
unsigned irq_wake:1;
@@ -386,6 +395,9 @@ struct musb {
unsigned is_multipoint:1;
unsigned ignore_disconnect:1; /* during bus resets */
+ unsigned hb_iso_rx:1; /* high bandwidth iso rx? */
+ unsigned hb_iso_tx:1; /* high bandwidth iso tx? */
+
#ifdef C_MP_TX
unsigned bulk_split:1;
#define can_bulk_split(musb,type) \
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index f79440cdfe7..8b3c4e2ed7b 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -310,7 +310,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
/* setup DMA, then program endpoint CSR */
request_size = min(request->length,
musb_ep->dma->max_len);
- if (request_size <= musb_ep->packet_sz)
+ if (request_size < musb_ep->packet_sz)
musb_ep->dma->desired_mode = 0;
else
musb_ep->dma->desired_mode = 1;
@@ -349,7 +349,8 @@ static void txstate(struct musb *musb, struct musb_request *req)
#elif defined(CONFIG_USB_TI_CPPI_DMA)
/* program endpoint CSR first, then setup DMA */
csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
- csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB;
+ csr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_DMAMODE |
+ MUSB_TXCSR_MODE;
musb_writew(epio, MUSB_TXCSR,
(MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
| csr);
@@ -1405,7 +1406,7 @@ static int musb_gadget_wakeup(struct usb_gadget *gadget)
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_B_PERIPHERAL:
/* NOTE: OTG state machine doesn't include B_SUSPENDED;
* that's part of the standard usb 1.1 state machine, and
@@ -1507,9 +1508,9 @@ static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
{
struct musb *musb = gadget_to_musb(gadget);
- if (!musb->xceiv.set_power)
+ if (!musb->xceiv->set_power)
return -EOPNOTSUPP;
- return otg_set_power(&musb->xceiv, mA);
+ return otg_set_power(musb->xceiv, mA);
}
static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
@@ -1732,11 +1733,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
spin_lock_irqsave(&musb->lock, flags);
- /* REVISIT always use otg_set_peripheral(), handling
- * issues including the root hub one below ...
- */
- musb->xceiv.gadget = &musb->g;
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ otg_set_peripheral(musb->xceiv, &musb->g);
musb->is_active = 1;
/* FIXME this ignores the softconnect flag. Drivers are
@@ -1748,6 +1745,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
if (!is_otg_enabled(musb))
musb_start(musb);
+ otg_set_peripheral(musb->xceiv, &musb->g);
+
spin_unlock_irqrestore(&musb->lock, flags);
if (is_otg_enabled(musb)) {
@@ -1761,8 +1760,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
if (retval < 0) {
DBG(1, "add_hcd failed, %d\n", retval);
spin_lock_irqsave(&musb->lock, flags);
- musb->xceiv.gadget = NULL;
- musb->xceiv.state = OTG_STATE_UNDEFINED;
+ otg_set_peripheral(musb->xceiv, NULL);
musb->gadget_driver = NULL;
musb->g.dev.driver = NULL;
spin_unlock_irqrestore(&musb->lock, flags);
@@ -1845,8 +1843,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
(void) musb_gadget_vbus_draw(&musb->g, 0);
- musb->xceiv.state = OTG_STATE_UNDEFINED;
+ musb->xceiv->state = OTG_STATE_UNDEFINED;
stop_activity(musb, driver);
+ otg_set_peripheral(musb->xceiv, NULL);
DBG(3, "unregistering driver %s\n", driver->function);
spin_unlock_irqrestore(&musb->lock, flags);
@@ -1882,7 +1881,7 @@ EXPORT_SYMBOL(usb_gadget_unregister_driver);
void musb_g_resume(struct musb *musb)
{
musb->is_suspended = 0;
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_B_IDLE:
break;
case OTG_STATE_B_WAIT_ACON:
@@ -1908,10 +1907,10 @@ void musb_g_suspend(struct musb *musb)
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
DBG(3, "devctl %02x\n", devctl);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_B_IDLE:
if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
break;
case OTG_STATE_B_PERIPHERAL:
musb->is_suspended = 1;
@@ -1957,22 +1956,24 @@ void musb_g_disconnect(struct musb *musb)
spin_lock(&musb->lock);
}
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
default:
#ifdef CONFIG_USB_MUSB_OTG
DBG(2, "Unhandled disconnect %s, setting a_idle\n",
otg_state_string(musb));
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
+ MUSB_HST_MODE(musb);
break;
case OTG_STATE_A_PERIPHERAL:
- musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+ MUSB_HST_MODE(musb);
break;
case OTG_STATE_B_WAIT_ACON:
case OTG_STATE_B_HOST:
#endif
case OTG_STATE_B_PERIPHERAL:
case OTG_STATE_B_IDLE:
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
break;
case OTG_STATE_B_SRP_INIT:
break;
@@ -2028,10 +2029,10 @@ __acquires(musb->lock)
* or else after HNP, as A-Device
*/
if (devctl & MUSB_DEVCTL_BDEVICE) {
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
musb->g.is_a_peripheral = 0;
} else if (is_otg_enabled(musb)) {
- musb->xceiv.state = OTG_STATE_A_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
musb->g.is_a_peripheral = 1;
} else
WARN_ON(1);
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 3f5e30ddfa2..40ed50ecedf 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -4,6 +4,7 @@
* Copyright 2005 Mentor Graphics Corporation
* Copyright (C) 2005-2006 by Texas Instruments
* Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -58,7 +59,8 @@
static char *decode_ep0stage(u8 stage)
{
switch (stage) {
- case MUSB_EP0_STAGE_SETUP: return "idle";
+ case MUSB_EP0_STAGE_IDLE: return "idle";
+ case MUSB_EP0_STAGE_SETUP: return "setup";
case MUSB_EP0_STAGE_TX: return "in";
case MUSB_EP0_STAGE_RX: return "out";
case MUSB_EP0_STAGE_ACKWAIT: return "wait";
@@ -628,7 +630,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
musb_writew(regs, MUSB_CSR0,
csr & ~MUSB_CSR0_P_SENTSTALL);
retval = IRQ_HANDLED;
- musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+ musb->ep0_state = MUSB_EP0_STAGE_IDLE;
csr = musb_readw(regs, MUSB_CSR0);
}
@@ -636,7 +638,18 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
if (csr & MUSB_CSR0_P_SETUPEND) {
musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDSETUPEND);
retval = IRQ_HANDLED;
- musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+ /* Transition into the early status phase */
+ switch (musb->ep0_state) {
+ case MUSB_EP0_STAGE_TX:
+ musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
+ break;
+ case MUSB_EP0_STAGE_RX:
+ musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+ break;
+ default:
+ ERR("SetupEnd came in a wrong ep0stage %s",
+ decode_ep0stage(musb->ep0_state));
+ }
csr = musb_readw(regs, MUSB_CSR0);
/* NOTE: request may need completion */
}
@@ -697,11 +710,31 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
if (req)
musb_g_ep0_giveback(musb, req);
}
+
+ /*
+ * In case when several interrupts can get coalesced,
+ * check to see if we've already received a SETUP packet...
+ */
+ if (csr & MUSB_CSR0_RXPKTRDY)
+ goto setup;
+
+ retval = IRQ_HANDLED;
+ musb->ep0_state = MUSB_EP0_STAGE_IDLE;
+ break;
+
+ case MUSB_EP0_STAGE_IDLE:
+ /*
+ * This state is typically (but not always) indiscernible
+ * from the status states since the corresponding interrupts
+ * tend to happen within too little period of time (with only
+ * a zero-length packet in between) and so get coalesced...
+ */
retval = IRQ_HANDLED;
musb->ep0_state = MUSB_EP0_STAGE_SETUP;
/* FALLTHROUGH */
case MUSB_EP0_STAGE_SETUP:
+setup:
if (csr & MUSB_CSR0_RXPKTRDY) {
struct usb_ctrlrequest setup;
int handled = 0;
@@ -783,7 +816,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
stall:
DBG(3, "stall (%d)\n", handled);
musb->ackpend |= MUSB_CSR0_P_SENDSTALL;
- musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+ musb->ep0_state = MUSB_EP0_STAGE_IDLE;
finish:
musb_writew(regs, MUSB_CSR0,
musb->ackpend);
@@ -803,7 +836,7 @@ finish:
/* "can't happen" */
WARN_ON(1);
musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SENDSTALL);
- musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+ musb->ep0_state = MUSB_EP0_STAGE_IDLE;
break;
}
@@ -959,7 +992,7 @@ static int musb_g_ep0_halt(struct usb_ep *e, int value)
csr |= MUSB_CSR0_P_SENDSTALL;
musb_writew(regs, MUSB_CSR0, csr);
- musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+ musb->ep0_state = MUSB_EP0_STAGE_IDLE;
musb->ackpend = 0;
break;
default:
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index db1b57415ec..94a2a350a41 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -181,6 +181,19 @@ static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep)
musb_writew(ep->regs, MUSB_TXCSR, txcsr);
}
+static void musb_ep_set_qh(struct musb_hw_ep *ep, int is_in, struct musb_qh *qh)
+{
+ if (is_in != 0 || ep->is_shared_fifo)
+ ep->in_qh = qh;
+ if (is_in == 0 || ep->is_shared_fifo)
+ ep->out_qh = qh;
+}
+
+static struct musb_qh *musb_ep_get_qh(struct musb_hw_ep *ep, int is_in)
+{
+ return is_in ? ep->in_qh : ep->out_qh;
+}
+
/*
* Start the URB at the front of an endpoint's queue
* end must be claimed from the caller.
@@ -210,7 +223,6 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
case USB_ENDPOINT_XFER_CONTROL:
/* control transfers always start with SETUP */
is_in = 0;
- hw_ep->out_qh = qh;
musb->ep0_stage = MUSB_EP0_START;
buf = urb->setup_packet;
len = 8;
@@ -239,10 +251,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
epnum, buf + offset, len);
/* Configure endpoint */
- if (is_in || hw_ep->is_shared_fifo)
- hw_ep->in_qh = qh;
- else
- hw_ep->out_qh = qh;
+ musb_ep_set_qh(hw_ep, is_in, qh);
musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len);
/* transmit may have more work: start it when it is time */
@@ -286,9 +295,8 @@ start:
}
}
-/* caller owns controller lock, irqs are blocked */
-static void
-__musb_giveback(struct musb *musb, struct urb *urb, int status)
+/* Context: caller owns controller lock, IRQs are blocked */
+static void musb_giveback(struct musb *musb, struct urb *urb, int status)
__releases(musb->lock)
__acquires(musb->lock)
{
@@ -321,60 +329,57 @@ __acquires(musb->lock)
spin_lock(&musb->lock);
}
-/* for bulk/interrupt endpoints only */
-static inline void
-musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb)
+/* For bulk/interrupt endpoints only */
+static inline void musb_save_toggle(struct musb_qh *qh, int is_in,
+ struct urb *urb)
{
- struct usb_device *udev = urb->dev;
+ void __iomem *epio = qh->hw_ep->regs;
u16 csr;
- void __iomem *epio = ep->regs;
- struct musb_qh *qh;
- /* FIXME: the current Mentor DMA code seems to have
+ /*
+ * FIXME: the current Mentor DMA code seems to have
* problems getting toggle correct.
*/
- if (is_in || ep->is_shared_fifo)
- qh = ep->in_qh;
+ if (is_in)
+ csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE;
else
- qh = ep->out_qh;
+ csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE;
- if (!is_in) {
- csr = musb_readw(epio, MUSB_TXCSR);
- usb_settoggle(udev, qh->epnum, 1,
- (csr & MUSB_TXCSR_H_DATATOGGLE)
- ? 1 : 0);
- } else {
- csr = musb_readw(epio, MUSB_RXCSR);
- usb_settoggle(udev, qh->epnum, 0,
- (csr & MUSB_RXCSR_H_DATATOGGLE)
- ? 1 : 0);
- }
+ usb_settoggle(urb->dev, qh->epnum, !is_in, csr ? 1 : 0);
}
-/* caller owns controller lock, irqs are blocked */
-static struct musb_qh *
-musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
+/*
+ * Advance this hardware endpoint's queue, completing the specified URB and
+ * advancing to either the next URB queued to that qh, or else invalidating
+ * that qh and advancing to the next qh scheduled after the current one.
+ *
+ * Context: caller owns controller lock, IRQs are blocked
+ */
+static void musb_advance_schedule(struct musb *musb, struct urb *urb,
+ struct musb_hw_ep *hw_ep, int is_in)
{
+ struct musb_qh *qh = musb_ep_get_qh(hw_ep, is_in);
struct musb_hw_ep *ep = qh->hw_ep;
- struct musb *musb = ep->musb;
- int is_in = usb_pipein(urb->pipe);
int ready = qh->is_ready;
+ int status;
+
+ status = (urb->status == -EINPROGRESS) ? 0 : urb->status;
/* save toggle eagerly, for paranoia */
switch (qh->type) {
case USB_ENDPOINT_XFER_BULK:
case USB_ENDPOINT_XFER_INT:
- musb_save_toggle(ep, is_in, urb);
+ musb_save_toggle(qh, is_in, urb);
break;
case USB_ENDPOINT_XFER_ISOC:
- if (status == 0 && urb->error_count)
+ if (urb->error_count)
status = -EXDEV;
break;
}
qh->is_ready = 0;
- __musb_giveback(musb, urb, status);
+ musb_giveback(musb, urb, status);
qh->is_ready = ready;
/* reclaim resources (and bandwidth) ASAP; deschedule it, and
@@ -388,11 +393,8 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
else
ep->tx_reinit = 1;
- /* clobber old pointers to this qh */
- if (is_in || ep->is_shared_fifo)
- ep->in_qh = NULL;
- else
- ep->out_qh = NULL;
+ /* Clobber old pointers to this qh */
+ musb_ep_set_qh(ep, is_in, NULL);
qh->hep->hcpriv = NULL;
switch (qh->type) {
@@ -421,36 +423,10 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
break;
}
}
- return qh;
-}
-
-/*
- * Advance this hardware endpoint's queue, completing the specified urb and
- * advancing to either the next urb queued to that qh, or else invalidating
- * that qh and advancing to the next qh scheduled after the current one.
- *
- * Context: caller owns controller lock, irqs are blocked
- */
-static void
-musb_advance_schedule(struct musb *musb, struct urb *urb,
- struct musb_hw_ep *hw_ep, int is_in)
-{
- struct musb_qh *qh;
-
- if (is_in || hw_ep->is_shared_fifo)
- qh = hw_ep->in_qh;
- else
- qh = hw_ep->out_qh;
-
- if (urb->status == -EINPROGRESS)
- qh = musb_giveback(qh, urb, 0);
- else
- qh = musb_giveback(qh, urb, urb->status);
if (qh != NULL && qh->is_ready) {
DBG(4, "... next ep%d %cX urb %p\n",
- hw_ep->epnum, is_in ? 'R' : 'T',
- next_urb(qh));
+ hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh));
musb_start_urb(musb, is_in, qh);
}
}
@@ -629,7 +605,8 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg);
musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg);
/* NOTE: bulk combining rewrites high bits of maxpacket */
- musb_writew(ep->regs, MUSB_RXMAXP, qh->maxpacket);
+ musb_writew(ep->regs, MUSB_RXMAXP,
+ qh->maxpacket | ((qh->hb_mult - 1) << 11));
ep->rx_reinit = 0;
}
@@ -651,9 +628,10 @@ static bool musb_tx_dma_program(struct dma_controller *dma,
csr = musb_readw(epio, MUSB_TXCSR);
if (length > pkt_size) {
mode = 1;
- csr |= MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_DMAENAB;
+ csr |= MUSB_TXCSR_DMAMODE | MUSB_TXCSR_DMAENAB;
+ /* autoset shouldn't be set in high bandwidth */
+ if (qh->hb_mult == 1)
+ csr |= MUSB_TXCSR_AUTOSET;
} else {
mode = 0;
csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
@@ -703,15 +681,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
void __iomem *mbase = musb->mregs;
struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
- struct musb_qh *qh;
- u16 packet_sz;
-
- if (!is_out || hw_ep->is_shared_fifo)
- qh = hw_ep->in_qh;
- else
- qh = hw_ep->out_qh;
-
- packet_sz = qh->maxpacket;
+ struct musb_qh *qh = musb_ep_get_qh(hw_ep, !is_out);
+ u16 packet_sz = qh->maxpacket;
DBG(3, "%s hw%d urb %p spd%d dev%d ep%d%s "
"h_addr%02x h_port%02x bytes %d\n",
@@ -1129,17 +1100,14 @@ void musb_host_tx(struct musb *musb, u8 epnum)
u16 tx_csr;
size_t length = 0;
size_t offset = 0;
- struct urb *urb;
struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
- struct musb_qh *qh = hw_ep->is_shared_fifo ? hw_ep->in_qh
- : hw_ep->out_qh;
+ struct musb_qh *qh = hw_ep->out_qh;
+ struct urb *urb = next_urb(qh);
u32 status = 0;
void __iomem *mbase = musb->mregs;
struct dma_channel *dma;
- urb = next_urb(qh);
-
musb_ep_select(mbase, epnum);
tx_csr = musb_readw(epio, MUSB_TXCSR);
@@ -1427,7 +1395,7 @@ static void musb_bulk_rx_nak_timeout(struct musb *musb, struct musb_hw_ep *ep)
urb->actual_length += dma->actual_len;
dma->actual_len = 0L;
}
- musb_save_toggle(ep, 1, urb);
+ musb_save_toggle(cur_qh, 1, urb);
/* move cur_qh to end of queue */
list_move_tail(&cur_qh->ring, &musb->in_bulk);
@@ -1531,6 +1499,10 @@ void musb_host_rx(struct musb *musb, u8 epnum)
/* packet error reported later */
iso_err = true;
}
+ } else if (rx_csr & MUSB_RXCSR_INCOMPRX) {
+ DBG(3, "end %d high bandwidth incomplete ISO packet RX\n",
+ epnum);
+ status = -EPROTO;
}
/* faults abort the transfer */
@@ -1738,7 +1710,11 @@ void musb_host_rx(struct musb *musb, u8 epnum)
val &= ~MUSB_RXCSR_H_AUTOREQ;
else
val |= MUSB_RXCSR_H_AUTOREQ;
- val |= MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB;
+ val |= MUSB_RXCSR_DMAENAB;
+
+ /* autoclear shouldn't be set in high bandwidth */
+ if (qh->hb_mult == 1)
+ val |= MUSB_RXCSR_AUTOCLEAR;
musb_writew(epio, MUSB_RXCSR,
MUSB_RXCSR_H_WZC_BITS | val);
@@ -1817,19 +1793,17 @@ static int musb_schedule(
epnum++, hw_ep++) {
int diff;
- if (is_in || hw_ep->is_shared_fifo) {
- if (hw_ep->in_qh != NULL)
- continue;
- } else if (hw_ep->out_qh != NULL)
+ if (musb_ep_get_qh(hw_ep, is_in) != NULL)
continue;
if (hw_ep == musb->bulk_ep)
continue;
if (is_in)
- diff = hw_ep->max_packet_sz_rx - qh->maxpacket;
+ diff = hw_ep->max_packet_sz_rx;
else
- diff = hw_ep->max_packet_sz_tx - qh->maxpacket;
+ diff = hw_ep->max_packet_sz_tx;
+ diff -= (qh->maxpacket * qh->hb_mult);
if (diff >= 0 && best_diff > diff) {
best_diff = diff;
@@ -1932,15 +1906,27 @@ static int musb_urb_enqueue(
qh->is_ready = 1;
qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
+ qh->type = usb_endpoint_type(epd);
- /* no high bandwidth support yet */
- if (qh->maxpacket & ~0x7ff) {
- ret = -EMSGSIZE;
- goto done;
+ /* Bits 11 & 12 of wMaxPacketSize encode high bandwidth multiplier.
+ * Some musb cores don't support high bandwidth ISO transfers; and
+ * we don't (yet!) support high bandwidth interrupt transfers.
+ */
+ qh->hb_mult = 1 + ((qh->maxpacket >> 11) & 0x03);
+ if (qh->hb_mult > 1) {
+ int ok = (qh->type == USB_ENDPOINT_XFER_ISOC);
+
+ if (ok)
+ ok = (usb_pipein(urb->pipe) && musb->hb_iso_rx)
+ || (usb_pipeout(urb->pipe) && musb->hb_iso_tx);
+ if (!ok) {
+ ret = -EMSGSIZE;
+ goto done;
+ }
+ qh->maxpacket &= 0x7ff;
}
qh->epnum = usb_endpoint_num(epd);
- qh->type = usb_endpoint_type(epd);
/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
@@ -2052,14 +2038,15 @@ done:
* called with controller locked, irqs blocked
* that hardware queue advances to the next transfer, unless prevented
*/
-static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
+static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
{
struct musb_hw_ep *ep = qh->hw_ep;
void __iomem *epio = ep->regs;
unsigned hw_end = ep->epnum;
void __iomem *regs = ep->musb->mregs;
- u16 csr;
+ int is_in = usb_pipein(urb->pipe);
int status = 0;
+ u16 csr;
musb_ep_select(regs, hw_end);
@@ -2112,14 +2099,14 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
struct musb *musb = hcd_to_musb(hcd);
struct musb_qh *qh;
- struct list_head *sched;
unsigned long flags;
+ int is_in = usb_pipein(urb->pipe);
int ret;
DBG(4, "urb=%p, dev%d ep%d%s\n", urb,
usb_pipedevice(urb->pipe),
usb_pipeendpoint(urb->pipe),
- usb_pipein(urb->pipe) ? "in" : "out");
+ is_in ? "in" : "out");
spin_lock_irqsave(&musb->lock, flags);
ret = usb_hcd_check_unlink_urb(hcd, urb, status);
@@ -2130,47 +2117,25 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
if (!qh)
goto done;
- /* Any URB not actively programmed into endpoint hardware can be
+ /*
+ * Any URB not actively programmed into endpoint hardware can be
* immediately given back; that's any URB not at the head of an
* endpoint queue, unless someday we get real DMA queues. And even
* if it's at the head, it might not be known to the hardware...
*
- * Otherwise abort current transfer, pending dma, etc.; urb->status
+ * Otherwise abort current transfer, pending DMA, etc.; urb->status
* has already been updated. This is a synchronous abort; it'd be
* OK to hold off until after some IRQ, though.
+ *
+ * NOTE: qh is invalid unless !list_empty(&hep->urb_list)
*/
- if (!qh->is_ready || urb->urb_list.prev != &qh->hep->urb_list)
- ret = -EINPROGRESS;
- else {
- switch (qh->type) {
- case USB_ENDPOINT_XFER_CONTROL:
- sched = &musb->control;
- break;
- case USB_ENDPOINT_XFER_BULK:
- if (qh->mux == 1) {
- if (usb_pipein(urb->pipe))
- sched = &musb->in_bulk;
- else
- sched = &musb->out_bulk;
- break;
- }
- default:
- /* REVISIT when we get a schedule tree, periodic
- * transfers won't always be at the head of a
- * singleton queue...
- */
- sched = NULL;
- break;
- }
- }
-
- /* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
- if (ret < 0 || (sched && qh != first_qh(sched))) {
+ if (!qh->is_ready
+ || urb->urb_list.prev != &qh->hep->urb_list
+ || musb_ep_get_qh(qh->hw_ep, is_in) != qh) {
int ready = qh->is_ready;
- ret = 0;
qh->is_ready = 0;
- __musb_giveback(musb, urb, 0);
+ musb_giveback(musb, urb, 0);
qh->is_ready = ready;
/* If nothing else (usually musb_giveback) is using it
@@ -2182,7 +2147,7 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
kfree(qh);
}
} else
- ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+ ret = musb_cleanup_urb(urb, qh);
done:
spin_unlock_irqrestore(&musb->lock, flags);
return ret;
@@ -2192,13 +2157,11 @@ done:
static void
musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
{
- u8 epnum = hep->desc.bEndpointAddress;
+ u8 is_in = hep->desc.bEndpointAddress & USB_DIR_IN;
unsigned long flags;
struct musb *musb = hcd_to_musb(hcd);
- u8 is_in = epnum & USB_DIR_IN;
struct musb_qh *qh;
struct urb *urb;
- struct list_head *sched;
spin_lock_irqsave(&musb->lock, flags);
@@ -2206,31 +2169,11 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
if (qh == NULL)
goto exit;
- switch (qh->type) {
- case USB_ENDPOINT_XFER_CONTROL:
- sched = &musb->control;
- break;
- case USB_ENDPOINT_XFER_BULK:
- if (qh->mux == 1) {
- if (is_in)
- sched = &musb->in_bulk;
- else
- sched = &musb->out_bulk;
- break;
- }
- default:
- /* REVISIT when we get a schedule tree, periodic transfers
- * won't always be at the head of a singleton queue...
- */
- sched = NULL;
- break;
- }
-
- /* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
+ /* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
- /* kick first urb off the hardware, if needed */
+ /* Kick the first URB off the hardware, if needed */
qh->is_ready = 0;
- if (!sched || qh == first_qh(sched)) {
+ if (musb_ep_get_qh(qh->hw_ep, is_in) == qh) {
urb = next_urb(qh);
/* make software (then hardware) stop ASAP */
@@ -2238,7 +2181,7 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
urb->status = -ESHUTDOWN;
/* cleanup */
- musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+ musb_cleanup_urb(urb, qh);
/* Then nuke all the others ... and advance the
* queue on hw_ep (e.g. bulk ring) when we're done.
@@ -2254,7 +2197,7 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
* will activate any of these as it advances.
*/
while (!list_empty(&hep->urb_list))
- __musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
+ musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
hep->hcpriv = NULL;
list_del(&qh->ring);
@@ -2293,7 +2236,7 @@ static int musb_bus_suspend(struct usb_hcd *hcd)
{
struct musb *musb = hcd_to_musb(hcd);
- if (musb->xceiv.state == OTG_STATE_A_SUSPEND)
+ if (musb->xceiv->state == OTG_STATE_A_SUSPEND)
return 0;
if (is_host_active(musb) && musb->is_active) {
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
index 0b7fbcd2196..14b00776638 100644
--- a/drivers/usb/musb/musb_host.h
+++ b/drivers/usb/musb/musb_host.h
@@ -67,6 +67,7 @@ struct musb_qh {
u8 is_ready; /* safe to modify hw_ep */
u8 type; /* XFERTYPE_* */
u8 epnum;
+ u8 hb_mult; /* high bandwidth pkts per uf */
u16 maxpacket;
u16 frame; /* for periodic schedule */
unsigned iso_idx; /* in urb->iso_frame_desc[] */
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index bf677acc83d..bfe5fe4ebfe 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -78,18 +78,22 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
DBG(3, "Root port suspended, power %02x\n", power);
musb->port1_status |= USB_PORT_STAT_SUSPEND;
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_HOST:
- musb->xceiv.state = OTG_STATE_A_SUSPEND;
+ musb->xceiv->state = OTG_STATE_A_SUSPEND;
musb->is_active = is_otg_enabled(musb)
- && musb->xceiv.host->b_hnp_enable;
+ && musb->xceiv->host->b_hnp_enable;
+ if (musb->is_active)
+ mod_timer(&musb->otg_timer, jiffies
+ + msecs_to_jiffies(
+ OTG_TIME_A_AIDL_BDIS));
musb_platform_try_idle(musb, 0);
break;
#ifdef CONFIG_USB_MUSB_OTG
case OTG_STATE_B_HOST:
- musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+ musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
musb->is_active = is_otg_enabled(musb)
- && musb->xceiv.host->b_hnp_enable;
+ && musb->xceiv->host->b_hnp_enable;
musb_platform_try_idle(musb, 0);
break;
#endif
@@ -116,7 +120,7 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
void __iomem *mbase = musb->mregs;
#ifdef CONFIG_USB_MUSB_OTG
- if (musb->xceiv.state == OTG_STATE_B_IDLE) {
+ if (musb->xceiv->state == OTG_STATE_B_IDLE) {
DBG(2, "HNP: Returning from HNP; no hub reset from b_idle\n");
musb->port1_status &= ~USB_PORT_STAT_RESET;
return;
@@ -186,14 +190,23 @@ void musb_root_disconnect(struct musb *musb)
usb_hcd_poll_rh_status(musb_to_hcd(musb));
musb->is_active = 0;
- switch (musb->xceiv.state) {
- case OTG_STATE_A_HOST:
+ switch (musb->xceiv->state) {
case OTG_STATE_A_SUSPEND:
- musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+#ifdef CONFIG_USB_MUSB_OTG
+ if (is_otg_enabled(musb)
+ && musb->xceiv->host->b_hnp_enable) {
+ musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
+ musb->g.is_a_peripheral = 1;
+ break;
+ }
+#endif
+ /* FALLTHROUGH */
+ case OTG_STATE_A_HOST:
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
musb->is_active = 0;
break;
case OTG_STATE_A_WAIT_VFALL:
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
break;
default:
DBG(1, "host disconnect (%s)\n", otg_state_string(musb));
@@ -332,7 +345,7 @@ int musb_hub_control(
musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
usb_hcd_poll_rh_status(musb_to_hcd(musb));
/* NOTE: it might really be A_WAIT_BCON ... */
- musb->xceiv.state = OTG_STATE_A_HOST;
+ musb->xceiv->state = OTG_STATE_A_HOST;
}
put_unaligned(cpu_to_le32(musb->port1_status
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 60924ce0849..34875201ee0 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -44,7 +44,6 @@
#define get_cpu_rev() 2
#endif
-#define MUSB_TIMEOUT_A_WAIT_BCON 1100
static struct timer_list musb_idle_timer;
@@ -61,17 +60,17 @@ static void musb_do_idle(unsigned long _musb)
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_WAIT_BCON:
devctl &= ~MUSB_DEVCTL_SESSION;
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (devctl & MUSB_DEVCTL_BDEVICE) {
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
MUSB_DEV_MODE(musb);
} else {
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
MUSB_HST_MODE(musb);
}
break;
@@ -89,7 +88,7 @@ static void musb_do_idle(unsigned long _musb)
musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
usb_hcd_poll_rh_status(musb_to_hcd(musb));
/* NOTE: it might really be A_WAIT_BCON ... */
- musb->xceiv.state = OTG_STATE_A_HOST;
+ musb->xceiv->state = OTG_STATE_A_HOST;
}
break;
#endif
@@ -97,9 +96,9 @@ static void musb_do_idle(unsigned long _musb)
case OTG_STATE_A_HOST:
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (devctl & MUSB_DEVCTL_BDEVICE)
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
else
- musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
#endif
default:
break;
@@ -118,7 +117,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
/* Never idle if active, or when VBUS timeout is not set as host */
if (musb->is_active || ((musb->a_wait_bcon == 0)
- && (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+ && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
del_timer(&musb_idle_timer);
last_timer = jiffies;
@@ -163,8 +162,8 @@ static void omap_set_vbus(struct musb *musb, int is_on)
if (is_on) {
musb->is_active = 1;
- musb->xceiv.default_a = 1;
- musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->default_a = 1;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
MUSB_HST_MODE(musb);
@@ -175,8 +174,8 @@ static void omap_set_vbus(struct musb *musb, int is_on)
* jumping right to B_IDLE...
*/
- musb->xceiv.default_a = 0;
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->default_a = 0;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
devctl &= ~MUSB_DEVCTL_SESSION;
MUSB_DEV_MODE(musb);
@@ -188,10 +187,6 @@ static void omap_set_vbus(struct musb *musb, int is_on)
otg_state_string(musb),
musb_readb(musb->mregs, MUSB_DEVCTL));
}
-static int omap_set_power(struct otg_transceiver *x, unsigned mA)
-{
- return 0;
-}
static int musb_platform_resume(struct musb *musb);
@@ -202,24 +197,6 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
devctl |= MUSB_DEVCTL_SESSION;
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
- switch (musb_mode) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
- case MUSB_HOST:
- otg_set_host(&musb->xceiv, musb->xceiv.host);
- break;
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
- case MUSB_PERIPHERAL:
- otg_set_peripheral(&musb->xceiv, musb->xceiv.gadget);
- break;
-#endif
-#ifdef CONFIG_USB_MUSB_OTG
- case MUSB_OTG:
- break;
-#endif
- default:
- return -EINVAL;
- }
return 0;
}
@@ -231,6 +208,16 @@ int __init musb_platform_init(struct musb *musb)
omap_cfg_reg(AE5_2430_USB0HS_STP);
#endif
+ /* We require some kind of external transceiver, hooked
+ * up through ULPI. TWL4030-family PMICs include one,
+ * which needs a driver, drivers aren't always needed.
+ */
+ musb->xceiv = otg_get_transceiver();
+ if (!musb->xceiv) {
+ pr_err("HS USB OTG: no transceiver configured\n");
+ return -ENODEV;
+ }
+
musb_platform_resume(musb);
l = omap_readl(OTG_SYSCONFIG);
@@ -240,7 +227,12 @@ int __init musb_platform_init(struct musb *musb)
l &= ~AUTOIDLE; /* disable auto idle */
l &= ~NOIDLE; /* remove possible noidle */
l |= SMARTIDLE; /* enable smart idle */
- l |= AUTOIDLE; /* enable auto idle */
+ /*
+ * MUSB AUTOIDLE don't work in 3430.
+ * Workaround by Richard Woodruff/TI
+ */
+ if (!cpu_is_omap3430())
+ l |= AUTOIDLE; /* enable auto idle */
omap_writel(l, OTG_SYSCONFIG);
l = omap_readl(OTG_INTERFSEL);
@@ -257,9 +249,6 @@ int __init musb_platform_init(struct musb *musb)
if (is_host_enabled(musb))
musb->board_set_vbus = omap_set_vbus;
- if (is_peripheral_enabled(musb))
- musb->xceiv.set_power = omap_set_power;
- musb->a_wait_bcon = MUSB_TIMEOUT_A_WAIT_BCON;
setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
@@ -282,8 +271,7 @@ int musb_platform_suspend(struct musb *musb)
l |= ENABLEWAKEUP; /* enable wakeup */
omap_writel(l, OTG_SYSCONFIG);
- if (musb->xceiv.set_suspend)
- musb->xceiv.set_suspend(&musb->xceiv, 1);
+ otg_set_suspend(musb->xceiv, 1);
if (musb->set_clock)
musb->set_clock(musb->clock, 0);
@@ -300,8 +288,7 @@ static int musb_platform_resume(struct musb *musb)
if (!musb->clock)
return 0;
- if (musb->xceiv.set_suspend)
- musb->xceiv.set_suspend(&musb->xceiv, 0);
+ otg_set_suspend(musb->xceiv, 0);
if (musb->set_clock)
musb->set_clock(musb->clock, 1);
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 4ac1477d356..88b587c703e 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -259,6 +259,8 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
tusb_fifo_read_unaligned(fifo, buf, len);
}
+static struct musb *the_musb;
+
#ifdef CONFIG_USB_GADGET_MUSB_HDRC
/* This is used by gadget drivers, and OTG transceiver logic, allowing
@@ -269,7 +271,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
*/
static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
{
- struct musb *musb = container_of(x, struct musb, xceiv);
+ struct musb *musb = the_musb;
void __iomem *tbase = musb->ctrl_base;
u32 reg;
@@ -419,7 +421,7 @@ static void musb_do_idle(unsigned long _musb)
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_WAIT_BCON:
if ((musb->a_wait_bcon != 0)
&& (musb->idle_timeout == 0
@@ -483,7 +485,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
/* Never idle if active, or when VBUS timeout is not set as host */
if (musb->is_active || ((musb->a_wait_bcon == 0)
- && (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+ && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
del_timer(&musb_idle_timer);
last_timer = jiffies;
@@ -532,8 +534,8 @@ static void tusb_source_power(struct musb *musb, int is_on)
if (musb->set_clock)
musb->set_clock(musb->clock, 1);
timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
- musb->xceiv.default_a = 1;
- musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->default_a = 1;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
conf |= TUSB_DEV_CONF_USB_HOST_MODE;
@@ -546,24 +548,24 @@ static void tusb_source_power(struct musb *musb, int is_on)
/* If ID pin is grounded, we want to be a_idle */
otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) {
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_WAIT_VRISE:
case OTG_STATE_A_WAIT_BCON:
- musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
break;
case OTG_STATE_A_WAIT_VFALL:
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
break;
default:
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
}
musb->is_active = 0;
- musb->xceiv.default_a = 1;
+ musb->xceiv->default_a = 1;
MUSB_HST_MODE(musb);
} else {
musb->is_active = 0;
- musb->xceiv.default_a = 0;
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->default_a = 0;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
MUSB_DEV_MODE(musb);
}
@@ -674,7 +676,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
else
default_a = is_host_enabled(musb);
DBG(2, "Default-%c\n", default_a ? 'A' : 'B');
- musb->xceiv.default_a = default_a;
+ musb->xceiv->default_a = default_a;
tusb_source_power(musb, default_a);
/* Don't allow idling immediately */
@@ -686,7 +688,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) {
/* B-dev state machine: no vbus ~= disconnect */
- if ((is_otg_enabled(musb) && !musb->xceiv.default_a)
+ if ((is_otg_enabled(musb) && !musb->xceiv->default_a)
|| !is_host_enabled(musb)) {
#ifdef CONFIG_USB_MUSB_HDRC_HCD
/* ? musb_root_disconnect(musb); */
@@ -701,9 +703,9 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) {
DBG(1, "Forcing disconnect (no interrupt)\n");
- if (musb->xceiv.state != OTG_STATE_B_IDLE) {
+ if (musb->xceiv->state != OTG_STATE_B_IDLE) {
/* INTR_DISCONNECT can hide... */
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
musb->int_usb |= MUSB_INTR_DISCONNECT;
}
musb->is_active = 0;
@@ -717,7 +719,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
DBG(2, "vbus change, %s, otg %03x\n",
otg_state_string(musb), otg_stat);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_IDLE:
DBG(2, "Got SRP, turning on VBUS\n");
musb_set_vbus(musb, 1);
@@ -765,7 +767,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
DBG(4, "%s timer, %03x\n", otg_state_string(musb), otg_stat);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_WAIT_VRISE:
/* VBUS has probably been valid for a while now,
* but may well have bounced out of range a bit
@@ -777,7 +779,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
DBG(2, "devctl %02x\n", devctl);
break;
}
- musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
musb->is_active = 0;
idle_timeout = jiffies
+ msecs_to_jiffies(musb->a_wait_bcon);
@@ -1093,9 +1095,14 @@ int __init musb_platform_init(struct musb *musb)
{
struct platform_device *pdev;
struct resource *mem;
- void __iomem *sync;
+ void __iomem *sync = NULL;
int ret;
+ usb_nop_xceiv_register();
+ musb->xceiv = otg_get_transceiver();
+ if (!musb->xceiv)
+ return -ENODEV;
+
pdev = to_platform_device(musb->controller);
/* dma address for async dma */
@@ -1106,14 +1113,16 @@ int __init musb_platform_init(struct musb *musb)
mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!mem) {
pr_debug("no sync dma resource?\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto done;
}
musb->sync = mem->start;
sync = ioremap(mem->start, mem->end - mem->start + 1);
if (!sync) {
pr_debug("ioremap for sync failed\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto done;
}
musb->sync_va = sync;
@@ -1126,28 +1135,37 @@ int __init musb_platform_init(struct musb *musb)
if (ret) {
printk(KERN_ERR "Could not start tusb6010 (%d)\n",
ret);
- return -ENODEV;
+ goto done;
}
musb->isr = tusb_interrupt;
if (is_host_enabled(musb))
musb->board_set_vbus = tusb_source_power;
- if (is_peripheral_enabled(musb))
- musb->xceiv.set_power = tusb_draw_power;
+ if (is_peripheral_enabled(musb)) {
+ musb->xceiv->set_power = tusb_draw_power;
+ the_musb = musb;
+ }
setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+done:
+ if (ret < 0) {
+ if (sync)
+ iounmap(sync);
+ usb_nop_xceiv_unregister();
+ }
return ret;
}
int musb_platform_exit(struct musb *musb)
{
del_timer_sync(&musb_idle_timer);
+ the_musb = NULL;
if (musb->board_set_power)
musb->board_set_power(0);
iounmap(musb->sync_va);
-
+ usb_nop_xceiv_unregister();
return 0;
}
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index aa884d072f0..69feeec1628 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -59,4 +59,18 @@ config NOP_USB_XCEIV
built-in with usb ip or which are autonomous and doesn't require any
phy programming such as ISP1x04 etc.
+config USB_LANGWELL_OTG
+ tristate "Intel Langwell USB OTG dual-role support"
+ depends on USB && MRST
+ select USB_OTG
+ select USB_OTG_UTILS
+ help
+ Say Y here if you want to build Intel Langwell USB OTG
+ transciever driver in kernel. This driver implements role
+ switch between EHCI host driver and Langwell USB OTG
+ client driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called langwell_otg.
+
endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 20816785652..6d1abdd3c0a 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_USB_OTG_UTILS) += otg.o
obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o
+obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o
obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o
ccflags-$(CONFIG_USB_DEBUG) += -DDEBUG
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
new file mode 100644
index 00000000000..6f628d0e9f3
--- /dev/null
+++ b/drivers/usb/otg/langwell_otg.c
@@ -0,0 +1,1915 @@
+/*
+ * Intel Langwell USB OTG transceiver driver
+ * Copyright (C) 2008 - 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+/* This driver helps to switch Langwell OTG controller function between host
+ * and peripheral. It works with EHCI driver and Langwell client controller
+ * driver together.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/notifier.h>
+#include <asm/ipc_defs.h>
+#include <linux/delay.h>
+#include "../core/hcd.h"
+
+#include <linux/usb/langwell_otg.h>
+
+#define DRIVER_DESC "Intel Langwell USB OTG transceiver driver"
+#define DRIVER_VERSION "3.0.0.32L.0002"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Henry Yuan <hang.yuan@intel.com>, Hao Wu <hao.wu@intel.com>");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+static const char driver_name[] = "langwell_otg";
+
+static int langwell_otg_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id);
+static void langwell_otg_remove(struct pci_dev *pdev);
+static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message);
+static int langwell_otg_resume(struct pci_dev *pdev);
+
+static int langwell_otg_set_host(struct otg_transceiver *otg,
+ struct usb_bus *host);
+static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
+ struct usb_gadget *gadget);
+static int langwell_otg_start_srp(struct otg_transceiver *otg);
+
+static const struct pci_device_id pci_ids[] = {{
+ .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class_mask = ~0,
+ .vendor = 0x8086,
+ .device = 0x0811,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+}, { /* end: all zeroes */ }
+};
+
+static struct pci_driver otg_pci_driver = {
+ .name = (char *) driver_name,
+ .id_table = pci_ids,
+
+ .probe = langwell_otg_probe,
+ .remove = langwell_otg_remove,
+
+ .suspend = langwell_otg_suspend,
+ .resume = langwell_otg_resume,
+};
+
+static const char *state_string(enum usb_otg_state state)
+{
+ switch (state) {
+ case OTG_STATE_A_IDLE:
+ return "a_idle";
+ case OTG_STATE_A_WAIT_VRISE:
+ return "a_wait_vrise";
+ case OTG_STATE_A_WAIT_BCON:
+ return "a_wait_bcon";
+ case OTG_STATE_A_HOST:
+ return "a_host";
+ case OTG_STATE_A_SUSPEND:
+ return "a_suspend";
+ case OTG_STATE_A_PERIPHERAL:
+ return "a_peripheral";
+ case OTG_STATE_A_WAIT_VFALL:
+ return "a_wait_vfall";
+ case OTG_STATE_A_VBUS_ERR:
+ return "a_vbus_err";
+ case OTG_STATE_B_IDLE:
+ return "b_idle";
+ case OTG_STATE_B_SRP_INIT:
+ return "b_srp_init";
+ case OTG_STATE_B_PERIPHERAL:
+ return "b_peripheral";
+ case OTG_STATE_B_WAIT_ACON:
+ return "b_wait_acon";
+ case OTG_STATE_B_HOST:
+ return "b_host";
+ default:
+ return "UNDEFINED";
+ }
+}
+
+/* HSM timers */
+static inline struct langwell_otg_timer *otg_timer_initializer
+(void (*function)(unsigned long), unsigned long expires, unsigned long data)
+{
+ struct langwell_otg_timer *timer;
+ timer = kmalloc(sizeof(struct langwell_otg_timer), GFP_KERNEL);
+ timer->function = function;
+ timer->expires = expires;
+ timer->data = data;
+ return timer;
+}
+
+static struct langwell_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr,
+ *a_aidl_bdis_tmr, *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_res_tmr,
+ *b_bus_suspend_tmr;
+
+static struct list_head active_timers;
+
+static struct langwell_otg *the_transceiver;
+
+/* host/client notify transceiver when event affects HNP state */
+void langwell_update_transceiver()
+{
+ otg_dbg("transceiver driver is notified\n");
+ queue_work(the_transceiver->qwork, &the_transceiver->work);
+}
+EXPORT_SYMBOL(langwell_update_transceiver);
+
+static int langwell_otg_set_host(struct otg_transceiver *otg,
+ struct usb_bus *host)
+{
+ otg->host = host;
+
+ return 0;
+}
+
+static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
+ struct usb_gadget *gadget)
+{
+ otg->gadget = gadget;
+
+ return 0;
+}
+
+static int langwell_otg_set_power(struct otg_transceiver *otg,
+ unsigned mA)
+{
+ return 0;
+}
+
+/* A-device drives vbus, controlled through PMIC CHRGCNTL register*/
+static void langwell_otg_drv_vbus(int on)
+{
+ struct ipc_pmic_reg_data pmic_data = {0};
+ struct ipc_pmic_reg_data battery_data;
+
+ /* Check if battery is attached or not */
+ battery_data.pmic_reg_data[0].register_address = 0xd2;
+ battery_data.ioc = 0;
+ battery_data.num_entries = 1;
+ if (ipc_pmic_register_read(&battery_data)) {
+ otg_dbg("Failed to read PMIC register 0xd2.\n");
+ return;
+ }
+
+ if ((battery_data.pmic_reg_data[0].value & 0x20) == 0) {
+ otg_dbg("no battery attached\n");
+ return;
+ }
+
+ /* Workaround for battery attachment issue */
+ if (battery_data.pmic_reg_data[0].value == 0x34) {
+ otg_dbg("battery \n");
+ return;
+ }
+
+ otg_dbg("battery attached\n");
+
+ pmic_data.ioc = 0;
+ pmic_data.pmic_reg_data[0].register_address = 0xD4;
+ pmic_data.num_entries = 1;
+ if (on)
+ pmic_data.pmic_reg_data[0].value = 0x20;
+ else
+ pmic_data.pmic_reg_data[0].value = 0xc0;
+
+ if (ipc_pmic_register_write(&pmic_data, TRUE))
+ otg_dbg("Failed to write PMIC.\n");
+
+}
+
+/* charge vbus or discharge vbus through a resistor to ground */
+static void langwell_otg_chrg_vbus(int on)
+{
+
+ u32 val;
+
+ val = readl(the_transceiver->regs + CI_OTGSC);
+
+ if (on)
+ writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VC,
+ the_transceiver->regs + CI_OTGSC);
+ else
+ writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VD,
+ the_transceiver->regs + CI_OTGSC);
+
+}
+
+/* Start SRP */
+static int langwell_otg_start_srp(struct otg_transceiver *otg)
+{
+ u32 val;
+
+ otg_dbg("Start SRP ->\n");
+
+ val = readl(the_transceiver->regs + CI_OTGSC);
+
+ writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP,
+ the_transceiver->regs + CI_OTGSC);
+
+ /* Check if the data plus is finished or not */
+ msleep(8);
+ val = readl(the_transceiver->regs + CI_OTGSC);
+ if (val & (OTGSC_HADP | OTGSC_DP))
+ otg_dbg("DataLine SRP Error\n");
+
+ /* FIXME: VBus SRP */
+
+ return 0;
+}
+
+
+/* stop SOF via bus_suspend */
+static void langwell_otg_loc_sof(int on)
+{
+ struct usb_hcd *hcd;
+ int err;
+
+ otg_dbg("loc_sof -> %d\n", on);
+
+ hcd = bus_to_hcd(the_transceiver->otg.host);
+ if (on)
+ err = hcd->driver->bus_resume(hcd);
+ else
+ err = hcd->driver->bus_suspend(hcd);
+
+ if (err)
+ otg_dbg("Failed to resume/suspend bus - %d\n", err);
+}
+
+static void langwell_otg_phy_low_power(int on)
+{
+ u32 val;
+
+ otg_dbg("phy low power mode-> %d\n", on);
+
+ val = readl(the_transceiver->regs + CI_HOSTPC1);
+ if (on)
+ writel(val | HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
+ else
+ writel(val & ~HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
+}
+
+/* Enable/Disable OTG interrupt */
+static void langwell_otg_intr(int on)
+{
+ u32 val;
+
+ otg_dbg("interrupt -> %d\n", on);
+
+ val = readl(the_transceiver->regs + CI_OTGSC);
+ if (on) {
+ val = val | (OTGSC_INTEN_MASK | OTGSC_IDPU);
+ writel(val, the_transceiver->regs + CI_OTGSC);
+ } else {
+ val = val & ~(OTGSC_INTEN_MASK | OTGSC_IDPU);
+ writel(val, the_transceiver->regs + CI_OTGSC);
+ }
+}
+
+/* set HAAR: Hardware Assist Auto-Reset */
+static void langwell_otg_HAAR(int on)
+{
+ u32 val;
+
+ otg_dbg("HAAR -> %d\n", on);
+
+ val = readl(the_transceiver->regs + CI_OTGSC);
+ if (on)
+ writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HAAR,
+ the_transceiver->regs + CI_OTGSC);
+ else
+ writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HAAR,
+ the_transceiver->regs + CI_OTGSC);
+}
+
+/* set HABA: Hardware Assist B-Disconnect to A-Connect */
+static void langwell_otg_HABA(int on)
+{
+ u32 val;
+
+ otg_dbg("HABA -> %d\n", on);
+
+ val = readl(the_transceiver->regs + CI_OTGSC);
+ if (on)
+ writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HABA,
+ the_transceiver->regs + CI_OTGSC);
+ else
+ writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HABA,
+ the_transceiver->regs + CI_OTGSC);
+}
+
+static int langwell_otg_check_se0_srp(int on)
+{
+ u32 val;
+
+ int delay_time = TB_SE0_SRP * 10; /* step is 100us */
+
+ otg_dbg("check_se0_srp -> \n");
+
+ do {
+ udelay(100);
+ if (!delay_time--)
+ break;
+ val = readl(the_transceiver->regs + CI_PORTSC1);
+ val &= PORTSC_LS;
+ } while (!val);
+
+ otg_dbg("check_se0_srp <- \n");
+ return val;
+}
+
+/* The timeout callback function to set time out bit */
+static void set_tmout(unsigned long indicator)
+{
+ *(int *)indicator = 1;
+}
+
+void langwell_otg_nsf_msg(unsigned long indicator)
+{
+ switch (indicator) {
+ case 2:
+ case 4:
+ case 6:
+ case 7:
+ printk(KERN_ERR "OTG:NSF-%lu - deivce not responding\n",
+ indicator);
+ break;
+ case 3:
+ printk(KERN_ERR "OTG:NSF-%lu - deivce not supported\n",
+ indicator);
+ break;
+ default:
+ printk(KERN_ERR "Do not have this kind of NSF\n");
+ break;
+ }
+}
+
+/* Initialize timers */
+static void langwell_otg_init_timers(struct otg_hsm *hsm)
+{
+ /* HSM used timers */
+ a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
+ (unsigned long)&hsm->a_wait_vrise_tmout);
+ a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
+ (unsigned long)&hsm->a_wait_bcon_tmout);
+ a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
+ (unsigned long)&hsm->a_aidl_bdis_tmout);
+ b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
+ (unsigned long)&hsm->b_ase0_brst_tmout);
+ b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
+ (unsigned long)&hsm->b_se0_srp);
+ b_srp_res_tmr = otg_timer_initializer(&set_tmout, TB_SRP_RES,
+ (unsigned long)&hsm->b_srp_res_tmout);
+ b_bus_suspend_tmr = otg_timer_initializer(&set_tmout, TB_BUS_SUSPEND,
+ (unsigned long)&hsm->b_bus_suspend_tmout);
+}
+
+/* Free timers */
+static void langwell_otg_free_timers(void)
+{
+ kfree(a_wait_vrise_tmr);
+ kfree(a_wait_bcon_tmr);
+ kfree(a_aidl_bdis_tmr);
+ kfree(b_ase0_brst_tmr);
+ kfree(b_se0_srp_tmr);
+ kfree(b_srp_res_tmr);
+ kfree(b_bus_suspend_tmr);
+}
+
+/* Add timer to timer list */
+static void langwell_otg_add_timer(void *gtimer)
+{
+ struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
+ struct langwell_otg_timer *tmp_timer;
+ u32 val32;
+
+ /* Check if the timer is already in the active list,
+ * if so update timer count
+ */
+ list_for_each_entry(tmp_timer, &active_timers, list)
+ if (tmp_timer == timer) {
+ timer->count = timer->expires;
+ return;
+ }
+ timer->count = timer->expires;
+
+ if (list_empty(&active_timers)) {
+ val32 = readl(the_transceiver->regs + CI_OTGSC);
+ writel(val32 | OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
+ }
+
+ list_add_tail(&timer->list, &active_timers);
+}
+
+/* Remove timer from the timer list; clear timeout status */
+static void langwell_otg_del_timer(void *gtimer)
+{
+ struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
+ struct langwell_otg_timer *tmp_timer, *del_tmp;
+ u32 val32;
+
+ list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
+ if (tmp_timer == timer)
+ list_del(&timer->list);
+
+ if (list_empty(&active_timers)) {
+ val32 = readl(the_transceiver->regs + CI_OTGSC);
+ writel(val32 & ~OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
+ }
+}
+
+/* Reduce timer count by 1, and find timeout conditions.*/
+static int langwell_otg_tick_timer(u32 *int_sts)
+{
+ struct langwell_otg_timer *tmp_timer, *del_tmp;
+ int expired = 0;
+
+ list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
+ tmp_timer->count--;
+ /* check if timer expires */
+ if (!tmp_timer->count) {
+ list_del(&tmp_timer->list);
+ tmp_timer->function(tmp_timer->data);
+ expired = 1;
+ }
+ }
+
+ if (list_empty(&active_timers)) {
+ otg_dbg("tick timer: disable 1ms int\n");
+ *int_sts = *int_sts & ~OTGSC_1MSE;
+ }
+ return expired;
+}
+
+static void reset_otg(void)
+{
+ u32 val;
+ int delay_time = 1000;
+
+ otg_dbg("reseting OTG controller ...\n");
+ val = readl(the_transceiver->regs + CI_USBCMD);
+ writel(val | USBCMD_RST, the_transceiver->regs + CI_USBCMD);
+ do {
+ udelay(100);
+ if (!delay_time--)
+ otg_dbg("reset timeout\n");
+ val = readl(the_transceiver->regs + CI_USBCMD);
+ val &= USBCMD_RST;
+ } while (val != 0);
+ otg_dbg("reset done.\n");
+}
+
+static void set_host_mode(void)
+{
+ u32 val;
+
+ reset_otg();
+ val = readl(the_transceiver->regs + CI_USBMODE);
+ val = (val & (~USBMODE_CM)) | USBMODE_HOST;
+ writel(val, the_transceiver->regs + CI_USBMODE);
+}
+
+static void set_client_mode(void)
+{
+ u32 val;
+
+ reset_otg();
+ val = readl(the_transceiver->regs + CI_USBMODE);
+ val = (val & (~USBMODE_CM)) | USBMODE_DEVICE;
+ writel(val, the_transceiver->regs + CI_USBMODE);
+}
+
+static void init_hsm(void)
+{
+ struct langwell_otg *langwell = the_transceiver;
+ u32 val32;
+
+ /* read OTGSC after reset */
+ val32 = readl(langwell->regs + CI_OTGSC);
+ otg_dbg("%s: OTGSC init value = 0x%x\n", __func__, val32);
+
+ /* set init state */
+ if (val32 & OTGSC_ID) {
+ langwell->hsm.id = 1;
+ langwell->otg.default_a = 0;
+ set_client_mode();
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ langwell_otg_drv_vbus(0);
+ } else {
+ langwell->hsm.id = 0;
+ langwell->otg.default_a = 1;
+ set_host_mode();
+ langwell->otg.state = OTG_STATE_A_IDLE;
+ }
+
+ /* set session indicator */
+ if (val32 & OTGSC_BSE)
+ langwell->hsm.b_sess_end = 1;
+ if (val32 & OTGSC_BSV)
+ langwell->hsm.b_sess_vld = 1;
+ if (val32 & OTGSC_ASV)
+ langwell->hsm.a_sess_vld = 1;
+ if (val32 & OTGSC_AVV)
+ langwell->hsm.a_vbus_vld = 1;
+
+ /* defautly power the bus */
+ langwell->hsm.a_bus_req = 1;
+ langwell->hsm.a_bus_drop = 0;
+ /* defautly don't request bus as B device */
+ langwell->hsm.b_bus_req = 0;
+ /* no system error */
+ langwell->hsm.a_clr_err = 0;
+}
+
+static irqreturn_t otg_dummy_irq(int irq, void *_dev)
+{
+ void __iomem *reg_base = _dev;
+ u32 val;
+ u32 int_mask = 0;
+
+ val = readl(reg_base + CI_USBMODE);
+ if ((val & USBMODE_CM) != USBMODE_DEVICE)
+ return IRQ_NONE;
+
+ val = readl(reg_base + CI_USBSTS);
+ int_mask = val & INTR_DUMMY_MASK;
+
+ if (int_mask == 0)
+ return IRQ_NONE;
+
+ /* clear hsm.b_conn here since host driver can't detect it
+ * otg_dummy_irq called means B-disconnect happened.
+ */
+ if (the_transceiver->hsm.b_conn) {
+ the_transceiver->hsm.b_conn = 0;
+ if (spin_trylock(&the_transceiver->wq_lock)) {
+ queue_work(the_transceiver->qwork,
+ &the_transceiver->work);
+ spin_unlock(&the_transceiver->wq_lock);
+ }
+ }
+ /* Clear interrupts */
+ writel(int_mask, reg_base + CI_USBSTS);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t otg_irq(int irq, void *_dev)
+{
+ struct langwell_otg *langwell = _dev;
+ u32 int_sts, int_en;
+ u32 int_mask = 0;
+ int flag = 0;
+
+ int_sts = readl(langwell->regs + CI_OTGSC);
+ int_en = (int_sts & OTGSC_INTEN_MASK) >> 8;
+ int_mask = int_sts & int_en;
+ if (int_mask == 0)
+ return IRQ_NONE;
+
+ if (int_mask & OTGSC_IDIS) {
+ otg_dbg("%s: id change int\n", __func__);
+ langwell->hsm.id = (int_sts & OTGSC_ID) ? 1 : 0;
+ flag = 1;
+ }
+ if (int_mask & OTGSC_DPIS) {
+ otg_dbg("%s: data pulse int\n", __func__);
+ langwell->hsm.a_srp_det = (int_sts & OTGSC_DPS) ? 1 : 0;
+ flag = 1;
+ }
+ if (int_mask & OTGSC_BSEIS) {
+ otg_dbg("%s: b session end int\n", __func__);
+ langwell->hsm.b_sess_end = (int_sts & OTGSC_BSE) ? 1 : 0;
+ flag = 1;
+ }
+ if (int_mask & OTGSC_BSVIS) {
+ otg_dbg("%s: b session valid int\n", __func__);
+ langwell->hsm.b_sess_vld = (int_sts & OTGSC_BSV) ? 1 : 0;
+ flag = 1;
+ }
+ if (int_mask & OTGSC_ASVIS) {
+ otg_dbg("%s: a session valid int\n", __func__);
+ langwell->hsm.a_sess_vld = (int_sts & OTGSC_ASV) ? 1 : 0;
+ flag = 1;
+ }
+ if (int_mask & OTGSC_AVVIS) {
+ otg_dbg("%s: a vbus valid int\n", __func__);
+ langwell->hsm.a_vbus_vld = (int_sts & OTGSC_AVV) ? 1 : 0;
+ flag = 1;
+ }
+
+ if (int_mask & OTGSC_1MSS) {
+ /* need to schedule otg_work if any timer is expired */
+ if (langwell_otg_tick_timer(&int_sts))
+ flag = 1;
+ }
+
+ writel((int_sts & ~OTGSC_INTSTS_MASK) | int_mask,
+ langwell->regs + CI_OTGSC);
+ if (flag)
+ queue_work(langwell->qwork, &langwell->work);
+
+ return IRQ_HANDLED;
+}
+
+static void langwell_otg_work(struct work_struct *work)
+{
+ struct langwell_otg *langwell = container_of(work,
+ struct langwell_otg, work);
+ int retval;
+
+ otg_dbg("%s: old state = %s\n", __func__,
+ state_string(langwell->otg.state));
+
+ switch (langwell->otg.state) {
+ case OTG_STATE_UNDEFINED:
+ case OTG_STATE_B_IDLE:
+ if (!langwell->hsm.id) {
+ langwell_otg_del_timer(b_srp_res_tmr);
+ langwell->otg.default_a = 1;
+ langwell->hsm.a_srp_det = 0;
+
+ langwell_otg_chrg_vbus(0);
+ langwell_otg_drv_vbus(0);
+
+ set_host_mode();
+ langwell->otg.state = OTG_STATE_A_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (langwell->hsm.b_srp_res_tmout) {
+ langwell->hsm.b_srp_res_tmout = 0;
+ langwell->hsm.b_bus_req = 0;
+ langwell_otg_nsf_msg(6);
+ } else if (langwell->hsm.b_sess_vld) {
+ langwell_otg_del_timer(b_srp_res_tmr);
+ langwell->hsm.b_sess_end = 0;
+ langwell->hsm.a_bus_suspend = 0;
+
+ langwell_otg_chrg_vbus(0);
+ if (langwell->client_ops) {
+ langwell->client_ops->resume(langwell->pdev);
+ langwell->otg.state = OTG_STATE_B_PERIPHERAL;
+ } else
+ otg_dbg("client driver not loaded.\n");
+
+ } else if (langwell->hsm.b_bus_req &&
+ (langwell->hsm.b_sess_end)) {
+ /* workaround for b_se0_srp detection */
+ retval = langwell_otg_check_se0_srp(0);
+ if (retval) {
+ langwell->hsm.b_bus_req = 0;
+ otg_dbg("LS is not SE0, try again later\n");
+ } else {
+ /* Start SRP */
+ langwell_otg_start_srp(&langwell->otg);
+ langwell_otg_add_timer(b_srp_res_tmr);
+ }
+ }
+ break;
+ case OTG_STATE_B_SRP_INIT:
+ if (!langwell->hsm.id) {
+ langwell->otg.default_a = 1;
+ langwell->hsm.a_srp_det = 0;
+
+ langwell_otg_drv_vbus(0);
+ langwell_otg_chrg_vbus(0);
+
+ langwell->otg.state = OTG_STATE_A_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (langwell->hsm.b_sess_vld) {
+ langwell_otg_chrg_vbus(0);
+ if (langwell->client_ops) {
+ langwell->client_ops->resume(langwell->pdev);
+ langwell->otg.state = OTG_STATE_B_PERIPHERAL;
+ } else
+ otg_dbg("client driver not loaded.\n");
+ }
+ break;
+ case OTG_STATE_B_PERIPHERAL:
+ if (!langwell->hsm.id) {
+ langwell->otg.default_a = 1;
+ langwell->hsm.a_srp_det = 0;
+
+ langwell_otg_drv_vbus(0);
+ langwell_otg_chrg_vbus(0);
+ set_host_mode();
+
+ if (langwell->client_ops) {
+ langwell->client_ops->suspend(langwell->pdev,
+ PMSG_FREEZE);
+ } else
+ otg_dbg("client driver has been removed.\n");
+
+ langwell->otg.state = OTG_STATE_A_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (!langwell->hsm.b_sess_vld) {
+ langwell->hsm.b_hnp_enable = 0;
+
+ if (langwell->client_ops) {
+ langwell->client_ops->suspend(langwell->pdev,
+ PMSG_FREEZE);
+ } else
+ otg_dbg("client driver has been removed.\n");
+
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ } else if (langwell->hsm.b_bus_req && langwell->hsm.b_hnp_enable
+ && langwell->hsm.a_bus_suspend) {
+
+ if (langwell->client_ops) {
+ langwell->client_ops->suspend(langwell->pdev,
+ PMSG_FREEZE);
+ } else
+ otg_dbg("client driver has been removed.\n");
+
+ langwell_otg_HAAR(1);
+ langwell->hsm.a_conn = 0;
+
+ if (langwell->host_ops) {
+ langwell->host_ops->probe(langwell->pdev,
+ langwell->host_ops->id_table);
+ langwell->otg.state = OTG_STATE_B_WAIT_ACON;
+ } else
+ otg_dbg("host driver not loaded.\n");
+
+ langwell->hsm.a_bus_resume = 0;
+ langwell->hsm.b_ase0_brst_tmout = 0;
+ langwell_otg_add_timer(b_ase0_brst_tmr);
+ }
+ break;
+
+ case OTG_STATE_B_WAIT_ACON:
+ if (!langwell->hsm.id) {
+ langwell_otg_del_timer(b_ase0_brst_tmr);
+ langwell->otg.default_a = 1;
+ langwell->hsm.a_srp_det = 0;
+
+ langwell_otg_drv_vbus(0);
+ langwell_otg_chrg_vbus(0);
+ set_host_mode();
+
+ langwell_otg_HAAR(0);
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell->otg.state = OTG_STATE_A_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (!langwell->hsm.b_sess_vld) {
+ langwell_otg_del_timer(b_ase0_brst_tmr);
+ langwell->hsm.b_hnp_enable = 0;
+ langwell->hsm.b_bus_req = 0;
+ langwell_otg_chrg_vbus(0);
+ langwell_otg_HAAR(0);
+
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ } else if (langwell->hsm.a_conn) {
+ langwell_otg_del_timer(b_ase0_brst_tmr);
+ langwell_otg_HAAR(0);
+ langwell->otg.state = OTG_STATE_B_HOST;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (langwell->hsm.a_bus_resume ||
+ langwell->hsm.b_ase0_brst_tmout) {
+ langwell_otg_del_timer(b_ase0_brst_tmr);
+ langwell_otg_HAAR(0);
+ langwell_otg_nsf_msg(7);
+
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+
+ langwell->hsm.a_bus_suspend = 0;
+ langwell->hsm.b_bus_req = 0;
+
+ if (langwell->client_ops)
+ langwell->client_ops->resume(langwell->pdev);
+ else
+ otg_dbg("client driver not loaded.\n");
+
+ langwell->otg.state = OTG_STATE_B_PERIPHERAL;
+ }
+ break;
+
+ case OTG_STATE_B_HOST:
+ if (!langwell->hsm.id) {
+ langwell->otg.default_a = 1;
+ langwell->hsm.a_srp_det = 0;
+
+ langwell_otg_drv_vbus(0);
+ langwell_otg_chrg_vbus(0);
+ set_host_mode();
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell->otg.state = OTG_STATE_A_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (!langwell->hsm.b_sess_vld) {
+ langwell->hsm.b_hnp_enable = 0;
+ langwell->hsm.b_bus_req = 0;
+ langwell_otg_chrg_vbus(0);
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ } else if ((!langwell->hsm.b_bus_req) ||
+ (!langwell->hsm.a_conn)) {
+ langwell->hsm.b_bus_req = 0;
+ langwell_otg_loc_sof(0);
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+
+ langwell->hsm.a_bus_suspend = 0;
+
+ if (langwell->client_ops)
+ langwell->client_ops->resume(langwell->pdev);
+ else
+ otg_dbg("client driver not loaded.\n");
+
+ langwell->otg.state = OTG_STATE_B_PERIPHERAL;
+ }
+ break;
+
+ case OTG_STATE_A_IDLE:
+ langwell->otg.default_a = 1;
+ if (langwell->hsm.id) {
+ langwell->otg.default_a = 0;
+ langwell->hsm.b_bus_req = 0;
+ langwell_otg_drv_vbus(0);
+ langwell_otg_chrg_vbus(0);
+
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (langwell->hsm.a_sess_vld) {
+ langwell_otg_drv_vbus(1);
+ langwell->hsm.a_srp_det = 1;
+ langwell->hsm.a_wait_vrise_tmout = 0;
+ langwell_otg_add_timer(a_wait_vrise_tmr);
+ langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (!langwell->hsm.a_bus_drop &&
+ (langwell->hsm.a_srp_det || langwell->hsm.a_bus_req)) {
+ langwell_otg_drv_vbus(1);
+ langwell->hsm.a_wait_vrise_tmout = 0;
+ langwell_otg_add_timer(a_wait_vrise_tmr);
+ langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
+ queue_work(langwell->qwork, &langwell->work);
+ }
+ break;
+ case OTG_STATE_A_WAIT_VRISE:
+ if (langwell->hsm.id) {
+ langwell_otg_del_timer(a_wait_vrise_tmr);
+ langwell->hsm.b_bus_req = 0;
+ langwell->otg.default_a = 0;
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ } else if (langwell->hsm.a_vbus_vld) {
+ langwell_otg_del_timer(a_wait_vrise_tmr);
+ if (langwell->host_ops)
+ langwell->host_ops->probe(langwell->pdev,
+ langwell->host_ops->id_table);
+ else
+ otg_dbg("host driver not loaded.\n");
+ langwell->hsm.b_conn = 0;
+ langwell->hsm.a_set_b_hnp_en = 0;
+ langwell->hsm.a_wait_bcon_tmout = 0;
+ langwell_otg_add_timer(a_wait_bcon_tmr);
+ langwell->otg.state = OTG_STATE_A_WAIT_BCON;
+ } else if (langwell->hsm.a_wait_vrise_tmout) {
+ if (langwell->hsm.a_vbus_vld) {
+ if (langwell->host_ops)
+ langwell->host_ops->probe(
+ langwell->pdev,
+ langwell->host_ops->id_table);
+ else
+ otg_dbg("host driver not loaded.\n");
+ langwell->hsm.b_conn = 0;
+ langwell->hsm.a_set_b_hnp_en = 0;
+ langwell->hsm.a_wait_bcon_tmout = 0;
+ langwell_otg_add_timer(a_wait_bcon_tmr);
+ langwell->otg.state = OTG_STATE_A_WAIT_BCON;
+ } else {
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_VBUS_ERR;
+ }
+ }
+ break;
+ case OTG_STATE_A_WAIT_BCON:
+ if (langwell->hsm.id) {
+ langwell_otg_del_timer(a_wait_bcon_tmr);
+
+ langwell->otg.default_a = 0;
+ langwell->hsm.b_bus_req = 0;
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (!langwell->hsm.a_vbus_vld) {
+ langwell_otg_del_timer(a_wait_bcon_tmr);
+
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_VBUS_ERR;
+ } else if (langwell->hsm.a_bus_drop ||
+ (langwell->hsm.a_wait_bcon_tmout &&
+ !langwell->hsm.a_bus_req)) {
+ langwell_otg_del_timer(a_wait_bcon_tmr);
+
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+ } else if (langwell->hsm.b_conn) {
+ langwell_otg_del_timer(a_wait_bcon_tmr);
+
+ langwell->hsm.a_suspend_req = 0;
+ langwell->otg.state = OTG_STATE_A_HOST;
+ if (!langwell->hsm.a_bus_req &&
+ langwell->hsm.a_set_b_hnp_en) {
+ /* It is not safe enough to do a fast
+ * transistion from A_WAIT_BCON to
+ * A_SUSPEND */
+ msleep(10000);
+ if (langwell->hsm.a_bus_req)
+ break;
+
+ if (request_irq(langwell->pdev->irq,
+ otg_dummy_irq, IRQF_SHARED,
+ driver_name, langwell->regs) != 0) {
+ otg_dbg("request interrupt %d fail\n",
+ langwell->pdev->irq);
+ }
+
+ langwell_otg_HABA(1);
+ langwell->hsm.b_bus_resume = 0;
+ langwell->hsm.a_aidl_bdis_tmout = 0;
+ langwell_otg_add_timer(a_aidl_bdis_tmr);
+
+ langwell_otg_loc_sof(0);
+ langwell->otg.state = OTG_STATE_A_SUSPEND;
+ } else if (!langwell->hsm.a_bus_req &&
+ !langwell->hsm.a_set_b_hnp_en) {
+ struct pci_dev *pdev = langwell->pdev;
+ if (langwell->host_ops)
+ langwell->host_ops->remove(pdev);
+ else
+ otg_dbg("host driver removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+ }
+ }
+ break;
+ case OTG_STATE_A_HOST:
+ if (langwell->hsm.id) {
+ langwell->otg.default_a = 0;
+ langwell->hsm.b_bus_req = 0;
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (langwell->hsm.a_bus_drop ||
+ (!langwell->hsm.a_set_b_hnp_en && !langwell->hsm.a_bus_req)) {
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+ } else if (!langwell->hsm.a_vbus_vld) {
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_VBUS_ERR;
+ } else if (langwell->hsm.a_set_b_hnp_en
+ && !langwell->hsm.a_bus_req) {
+ /* Set HABA to enable hardware assistance to signal
+ * A-connect after receiver B-disconnect. Hardware
+ * will then set client mode and enable URE, SLE and
+ * PCE after the assistance. otg_dummy_irq is used to
+ * clean these ints when client driver is not resumed.
+ */
+ if (request_irq(langwell->pdev->irq,
+ otg_dummy_irq, IRQF_SHARED, driver_name,
+ langwell->regs) != 0) {
+ otg_dbg("request interrupt %d failed\n",
+ langwell->pdev->irq);
+ }
+
+ /* set HABA */
+ langwell_otg_HABA(1);
+ langwell->hsm.b_bus_resume = 0;
+ langwell->hsm.a_aidl_bdis_tmout = 0;
+ langwell_otg_add_timer(a_aidl_bdis_tmr);
+ langwell_otg_loc_sof(0);
+ langwell->otg.state = OTG_STATE_A_SUSPEND;
+ } else if (!langwell->hsm.b_conn || !langwell->hsm.a_bus_req) {
+ langwell->hsm.a_wait_bcon_tmout = 0;
+ langwell->hsm.a_set_b_hnp_en = 0;
+ langwell_otg_add_timer(a_wait_bcon_tmr);
+ langwell->otg.state = OTG_STATE_A_WAIT_BCON;
+ }
+ break;
+ case OTG_STATE_A_SUSPEND:
+ if (langwell->hsm.id) {
+ langwell_otg_del_timer(a_aidl_bdis_tmr);
+ langwell_otg_HABA(0);
+ free_irq(langwell->pdev->irq, langwell->regs);
+ langwell->otg.default_a = 0;
+ langwell->hsm.b_bus_req = 0;
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (langwell->hsm.a_bus_req ||
+ langwell->hsm.b_bus_resume) {
+ langwell_otg_del_timer(a_aidl_bdis_tmr);
+ langwell_otg_HABA(0);
+ free_irq(langwell->pdev->irq, langwell->regs);
+ langwell->hsm.a_suspend_req = 0;
+ langwell_otg_loc_sof(1);
+ langwell->otg.state = OTG_STATE_A_HOST;
+ } else if (langwell->hsm.a_aidl_bdis_tmout ||
+ langwell->hsm.a_bus_drop) {
+ langwell_otg_del_timer(a_aidl_bdis_tmr);
+ langwell_otg_HABA(0);
+ free_irq(langwell->pdev->irq, langwell->regs);
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+ } else if (!langwell->hsm.b_conn &&
+ langwell->hsm.a_set_b_hnp_en) {
+ langwell_otg_del_timer(a_aidl_bdis_tmr);
+ langwell_otg_HABA(0);
+ free_irq(langwell->pdev->irq, langwell->regs);
+
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+
+ langwell->hsm.b_bus_suspend = 0;
+ langwell->hsm.b_bus_suspend_vld = 0;
+ langwell->hsm.b_bus_suspend_tmout = 0;
+
+ /* msleep(200); */
+ if (langwell->client_ops)
+ langwell->client_ops->resume(langwell->pdev);
+ else
+ otg_dbg("client driver not loaded.\n");
+
+ langwell_otg_add_timer(b_bus_suspend_tmr);
+ langwell->otg.state = OTG_STATE_A_PERIPHERAL;
+ break;
+ } else if (!langwell->hsm.a_vbus_vld) {
+ langwell_otg_del_timer(a_aidl_bdis_tmr);
+ langwell_otg_HABA(0);
+ free_irq(langwell->pdev->irq, langwell->regs);
+ if (langwell->host_ops)
+ langwell->host_ops->remove(langwell->pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_VBUS_ERR;
+ }
+ break;
+ case OTG_STATE_A_PERIPHERAL:
+ if (langwell->hsm.id) {
+ langwell_otg_del_timer(b_bus_suspend_tmr);
+ langwell->otg.default_a = 0;
+ langwell->hsm.b_bus_req = 0;
+ if (langwell->client_ops)
+ langwell->client_ops->suspend(langwell->pdev,
+ PMSG_FREEZE);
+ else
+ otg_dbg("client driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (!langwell->hsm.a_vbus_vld) {
+ langwell_otg_del_timer(b_bus_suspend_tmr);
+ if (langwell->client_ops)
+ langwell->client_ops->suspend(langwell->pdev,
+ PMSG_FREEZE);
+ else
+ otg_dbg("client driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_VBUS_ERR;
+ } else if (langwell->hsm.a_bus_drop) {
+ langwell_otg_del_timer(b_bus_suspend_tmr);
+ if (langwell->client_ops)
+ langwell->client_ops->suspend(langwell->pdev,
+ PMSG_FREEZE);
+ else
+ otg_dbg("client driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+ } else if (langwell->hsm.b_bus_suspend) {
+ langwell_otg_del_timer(b_bus_suspend_tmr);
+ if (langwell->client_ops)
+ langwell->client_ops->suspend(langwell->pdev,
+ PMSG_FREEZE);
+ else
+ otg_dbg("client driver has been removed.\n");
+
+ if (langwell->host_ops)
+ langwell->host_ops->probe(langwell->pdev,
+ langwell->host_ops->id_table);
+ else
+ otg_dbg("host driver not loaded.\n");
+ langwell->hsm.a_set_b_hnp_en = 0;
+ langwell->hsm.a_wait_bcon_tmout = 0;
+ langwell_otg_add_timer(a_wait_bcon_tmr);
+ langwell->otg.state = OTG_STATE_A_WAIT_BCON;
+ } else if (langwell->hsm.b_bus_suspend_tmout) {
+ u32 val;
+ val = readl(langwell->regs + CI_PORTSC1);
+ if (!(val & PORTSC_SUSP))
+ break;
+ if (langwell->client_ops)
+ langwell->client_ops->suspend(langwell->pdev,
+ PMSG_FREEZE);
+ else
+ otg_dbg("client driver has been removed.\n");
+ if (langwell->host_ops)
+ langwell->host_ops->probe(langwell->pdev,
+ langwell->host_ops->id_table);
+ else
+ otg_dbg("host driver not loaded.\n");
+ langwell->hsm.a_set_b_hnp_en = 0;
+ langwell->hsm.a_wait_bcon_tmout = 0;
+ langwell_otg_add_timer(a_wait_bcon_tmr);
+ langwell->otg.state = OTG_STATE_A_WAIT_BCON;
+ }
+ break;
+ case OTG_STATE_A_VBUS_ERR:
+ if (langwell->hsm.id) {
+ langwell->otg.default_a = 0;
+ langwell->hsm.a_clr_err = 0;
+ langwell->hsm.a_srp_det = 0;
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (langwell->hsm.a_clr_err) {
+ langwell->hsm.a_clr_err = 0;
+ langwell->hsm.a_srp_det = 0;
+ reset_otg();
+ init_hsm();
+ if (langwell->otg.state == OTG_STATE_A_IDLE)
+ queue_work(langwell->qwork, &langwell->work);
+ }
+ break;
+ case OTG_STATE_A_WAIT_VFALL:
+ if (langwell->hsm.id) {
+ langwell->otg.default_a = 0;
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ queue_work(langwell->qwork, &langwell->work);
+ } else if (langwell->hsm.a_bus_req) {
+ langwell_otg_drv_vbus(1);
+ langwell->hsm.a_wait_vrise_tmout = 0;
+ langwell_otg_add_timer(a_wait_vrise_tmr);
+ langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
+ } else if (!langwell->hsm.a_sess_vld) {
+ langwell->hsm.a_srp_det = 0;
+ langwell_otg_drv_vbus(0);
+ set_host_mode();
+ langwell->otg.state = OTG_STATE_A_IDLE;
+ }
+ break;
+ default:
+ ;
+ }
+
+ otg_dbg("%s: new state = %s\n", __func__,
+ state_string(langwell->otg.state));
+}
+
+ static ssize_t
+show_registers(struct device *_dev, struct device_attribute *attr, char *buf)
+{
+ struct langwell_otg *langwell;
+ char *next;
+ unsigned size;
+ unsigned t;
+
+ langwell = the_transceiver;
+ next = buf;
+ size = PAGE_SIZE;
+
+ t = scnprintf(next, size,
+ "\n"
+ "USBCMD = 0x%08x \n"
+ "USBSTS = 0x%08x \n"
+ "USBINTR = 0x%08x \n"
+ "ASYNCLISTADDR = 0x%08x \n"
+ "PORTSC1 = 0x%08x \n"
+ "HOSTPC1 = 0x%08x \n"
+ "OTGSC = 0x%08x \n"
+ "USBMODE = 0x%08x \n",
+ readl(langwell->regs + 0x30),
+ readl(langwell->regs + 0x34),
+ readl(langwell->regs + 0x38),
+ readl(langwell->regs + 0x48),
+ readl(langwell->regs + 0x74),
+ readl(langwell->regs + 0xb4),
+ readl(langwell->regs + 0xf4),
+ readl(langwell->regs + 0xf8)
+ );
+ size -= t;
+ next += t;
+
+ return PAGE_SIZE - size;
+}
+static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
+
+static ssize_t
+show_hsm(struct device *_dev, struct device_attribute *attr, char *buf)
+{
+ struct langwell_otg *langwell;
+ char *next;
+ unsigned size;
+ unsigned t;
+
+ langwell = the_transceiver;
+ next = buf;
+ size = PAGE_SIZE;
+
+ t = scnprintf(next, size,
+ "\n"
+ "current state = %s\n"
+ "a_bus_resume = \t%d\n"
+ "a_bus_suspend = \t%d\n"
+ "a_conn = \t%d\n"
+ "a_sess_vld = \t%d\n"
+ "a_srp_det = \t%d\n"
+ "a_vbus_vld = \t%d\n"
+ "b_bus_resume = \t%d\n"
+ "b_bus_suspend = \t%d\n"
+ "b_conn = \t%d\n"
+ "b_se0_srp = \t%d\n"
+ "b_sess_end = \t%d\n"
+ "b_sess_vld = \t%d\n"
+ "id = \t%d\n"
+ "a_set_b_hnp_en = \t%d\n"
+ "b_srp_done = \t%d\n"
+ "b_hnp_enable = \t%d\n"
+ "a_wait_vrise_tmout = \t%d\n"
+ "a_wait_bcon_tmout = \t%d\n"
+ "a_aidl_bdis_tmout = \t%d\n"
+ "b_ase0_brst_tmout = \t%d\n"
+ "a_bus_drop = \t%d\n"
+ "a_bus_req = \t%d\n"
+ "a_clr_err = \t%d\n"
+ "a_suspend_req = \t%d\n"
+ "b_bus_req = \t%d\n"
+ "b_bus_suspend_tmout = \t%d\n"
+ "b_bus_suspend_vld = \t%d\n",
+ state_string(langwell->otg.state),
+ langwell->hsm.a_bus_resume,
+ langwell->hsm.a_bus_suspend,
+ langwell->hsm.a_conn,
+ langwell->hsm.a_sess_vld,
+ langwell->hsm.a_srp_det,
+ langwell->hsm.a_vbus_vld,
+ langwell->hsm.b_bus_resume,
+ langwell->hsm.b_bus_suspend,
+ langwell->hsm.b_conn,
+ langwell->hsm.b_se0_srp,
+ langwell->hsm.b_sess_end,
+ langwell->hsm.b_sess_vld,
+ langwell->hsm.id,
+ langwell->hsm.a_set_b_hnp_en,
+ langwell->hsm.b_srp_done,
+ langwell->hsm.b_hnp_enable,
+ langwell->hsm.a_wait_vrise_tmout,
+ langwell->hsm.a_wait_bcon_tmout,
+ langwell->hsm.a_aidl_bdis_tmout,
+ langwell->hsm.b_ase0_brst_tmout,
+ langwell->hsm.a_bus_drop,
+ langwell->hsm.a_bus_req,
+ langwell->hsm.a_clr_err,
+ langwell->hsm.a_suspend_req,
+ langwell->hsm.b_bus_req,
+ langwell->hsm.b_bus_suspend_tmout,
+ langwell->hsm.b_bus_suspend_vld
+ );
+ size -= t;
+ next += t;
+
+ return PAGE_SIZE - size;
+}
+static DEVICE_ATTR(hsm, S_IRUGO, show_hsm, NULL);
+
+static ssize_t
+get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct langwell_otg *langwell;
+ char *next;
+ unsigned size;
+ unsigned t;
+
+ langwell = the_transceiver;
+ next = buf;
+ size = PAGE_SIZE;
+
+ t = scnprintf(next, size, "%d", langwell->hsm.a_bus_req);
+ size -= t;
+ next += t;
+
+ return PAGE_SIZE - size;
+}
+
+static ssize_t
+set_a_bus_req(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct langwell_otg *langwell;
+ langwell = the_transceiver;
+ if (!langwell->otg.default_a)
+ return -1;
+ if (count > 2)
+ return -1;
+
+ if (buf[0] == '0') {
+ langwell->hsm.a_bus_req = 0;
+ otg_dbg("a_bus_req = 0\n");
+ } else if (buf[0] == '1') {
+ /* If a_bus_drop is TRUE, a_bus_req can't be set */
+ if (langwell->hsm.a_bus_drop)
+ return -1;
+ langwell->hsm.a_bus_req = 1;
+ otg_dbg("a_bus_req = 1\n");
+ }
+ if (spin_trylock(&langwell->wq_lock)) {
+ queue_work(langwell->qwork, &langwell->work);
+ spin_unlock(&langwell->wq_lock);
+ }
+ return count;
+}
+static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req);
+
+static ssize_t
+get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct langwell_otg *langwell;
+ char *next;
+ unsigned size;
+ unsigned t;
+
+ langwell = the_transceiver;
+ next = buf;
+ size = PAGE_SIZE;
+
+ t = scnprintf(next, size, "%d", langwell->hsm.a_bus_drop);
+ size -= t;
+ next += t;
+
+ return PAGE_SIZE - size;
+}
+
+static ssize_t
+set_a_bus_drop(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct langwell_otg *langwell;
+ langwell = the_transceiver;
+ if (!langwell->otg.default_a)
+ return -1;
+ if (count > 2)
+ return -1;
+
+ if (buf[0] == '0') {
+ langwell->hsm.a_bus_drop = 0;
+ otg_dbg("a_bus_drop = 0\n");
+ } else if (buf[0] == '1') {
+ langwell->hsm.a_bus_drop = 1;
+ langwell->hsm.a_bus_req = 0;
+ otg_dbg("a_bus_drop = 1, then a_bus_req = 0\n");
+ }
+ if (spin_trylock(&langwell->wq_lock)) {
+ queue_work(langwell->qwork, &langwell->work);
+ spin_unlock(&langwell->wq_lock);
+ }
+ return count;
+}
+static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO,
+ get_a_bus_drop, set_a_bus_drop);
+
+static ssize_t
+get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct langwell_otg *langwell;
+ char *next;
+ unsigned size;
+ unsigned t;
+
+ langwell = the_transceiver;
+ next = buf;
+ size = PAGE_SIZE;
+
+ t = scnprintf(next, size, "%d", langwell->hsm.b_bus_req);
+ size -= t;
+ next += t;
+
+ return PAGE_SIZE - size;
+}
+
+static ssize_t
+set_b_bus_req(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct langwell_otg *langwell;
+ langwell = the_transceiver;
+
+ if (langwell->otg.default_a)
+ return -1;
+
+ if (count > 2)
+ return -1;
+
+ if (buf[0] == '0') {
+ langwell->hsm.b_bus_req = 0;
+ otg_dbg("b_bus_req = 0\n");
+ } else if (buf[0] == '1') {
+ langwell->hsm.b_bus_req = 1;
+ otg_dbg("b_bus_req = 1\n");
+ }
+ if (spin_trylock(&langwell->wq_lock)) {
+ queue_work(langwell->qwork, &langwell->work);
+ spin_unlock(&langwell->wq_lock);
+ }
+ return count;
+}
+static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req);
+
+static ssize_t
+set_a_clr_err(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct langwell_otg *langwell;
+ langwell = the_transceiver;
+
+ if (!langwell->otg.default_a)
+ return -1;
+ if (count > 2)
+ return -1;
+
+ if (buf[0] == '1') {
+ langwell->hsm.a_clr_err = 1;
+ otg_dbg("a_clr_err = 1\n");
+ }
+ if (spin_trylock(&langwell->wq_lock)) {
+ queue_work(langwell->qwork, &langwell->work);
+ spin_unlock(&langwell->wq_lock);
+ }
+ return count;
+}
+static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err);
+
+static struct attribute *inputs_attrs[] = {
+ &dev_attr_a_bus_req.attr,
+ &dev_attr_a_bus_drop.attr,
+ &dev_attr_b_bus_req.attr,
+ &dev_attr_a_clr_err.attr,
+ NULL,
+};
+
+static struct attribute_group debug_dev_attr_group = {
+ .name = "inputs",
+ .attrs = inputs_attrs,
+};
+
+int langwell_register_host(struct pci_driver *host_driver)
+{
+ int ret = 0;
+
+ the_transceiver->host_ops = host_driver;
+ queue_work(the_transceiver->qwork, &the_transceiver->work);
+ otg_dbg("host controller driver is registered\n");
+
+ return ret;
+}
+EXPORT_SYMBOL(langwell_register_host);
+
+void langwell_unregister_host(struct pci_driver *host_driver)
+{
+ if (the_transceiver->host_ops)
+ the_transceiver->host_ops->remove(the_transceiver->pdev);
+ the_transceiver->host_ops = NULL;
+ the_transceiver->hsm.a_bus_drop = 1;
+ queue_work(the_transceiver->qwork, &the_transceiver->work);
+ otg_dbg("host controller driver is unregistered\n");
+}
+EXPORT_SYMBOL(langwell_unregister_host);
+
+int langwell_register_peripheral(struct pci_driver *client_driver)
+{
+ int ret = 0;
+
+ if (client_driver)
+ ret = client_driver->probe(the_transceiver->pdev,
+ client_driver->id_table);
+ if (!ret) {
+ the_transceiver->client_ops = client_driver;
+ queue_work(the_transceiver->qwork, &the_transceiver->work);
+ otg_dbg("client controller driver is registered\n");
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(langwell_register_peripheral);
+
+void langwell_unregister_peripheral(struct pci_driver *client_driver)
+{
+ if (the_transceiver->client_ops)
+ the_transceiver->client_ops->remove(the_transceiver->pdev);
+ the_transceiver->client_ops = NULL;
+ the_transceiver->hsm.b_bus_req = 0;
+ queue_work(the_transceiver->qwork, &the_transceiver->work);
+ otg_dbg("client controller driver is unregistered\n");
+}
+EXPORT_SYMBOL(langwell_unregister_peripheral);
+
+static int langwell_otg_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ unsigned long resource, len;
+ void __iomem *base = NULL;
+ int retval;
+ u32 val32;
+ struct langwell_otg *langwell;
+ char qname[] = "langwell_otg_queue";
+
+ retval = 0;
+ otg_dbg("\notg controller is detected.\n");
+ if (pci_enable_device(pdev) < 0) {
+ retval = -ENODEV;
+ goto done;
+ }
+
+ langwell = kzalloc(sizeof *langwell, GFP_KERNEL);
+ if (langwell == NULL) {
+ retval = -ENOMEM;
+ goto done;
+ }
+ the_transceiver = langwell;
+
+ /* control register: BAR 0 */
+ resource = pci_resource_start(pdev, 0);
+ len = pci_resource_len(pdev, 0);
+ if (!request_mem_region(resource, len, driver_name)) {
+ retval = -EBUSY;
+ goto err;
+ }
+ langwell->region = 1;
+
+ base = ioremap_nocache(resource, len);
+ if (base == NULL) {
+ retval = -EFAULT;
+ goto err;
+ }
+ langwell->regs = base;
+
+ if (!pdev->irq) {
+ otg_dbg("No IRQ.\n");
+ retval = -ENODEV;
+ goto err;
+ }
+
+ langwell->qwork = create_workqueue(qname);
+ if (!langwell->qwork) {
+ otg_dbg("cannot create workqueue %s\n", qname);
+ retval = -ENOMEM;
+ goto err;
+ }
+ INIT_WORK(&langwell->work, langwell_otg_work);
+
+ /* OTG common part */
+ langwell->pdev = pdev;
+ langwell->otg.dev = &pdev->dev;
+ langwell->otg.label = driver_name;
+ langwell->otg.set_host = langwell_otg_set_host;
+ langwell->otg.set_peripheral = langwell_otg_set_peripheral;
+ langwell->otg.set_power = langwell_otg_set_power;
+ langwell->otg.start_srp = langwell_otg_start_srp;
+ langwell->otg.state = OTG_STATE_UNDEFINED;
+ if (otg_set_transceiver(&langwell->otg)) {
+ otg_dbg("can't set transceiver\n");
+ retval = -EBUSY;
+ goto err;
+ }
+
+ reset_otg();
+ init_hsm();
+
+ spin_lock_init(&langwell->lock);
+ spin_lock_init(&langwell->wq_lock);
+ INIT_LIST_HEAD(&active_timers);
+ langwell_otg_init_timers(&langwell->hsm);
+
+ if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
+ driver_name, langwell) != 0) {
+ otg_dbg("request interrupt %d failed\n", pdev->irq);
+ retval = -EBUSY;
+ goto err;
+ }
+
+ /* enable OTGSC int */
+ val32 = OTGSC_DPIE | OTGSC_BSEIE | OTGSC_BSVIE |
+ OTGSC_ASVIE | OTGSC_AVVIE | OTGSC_IDIE | OTGSC_IDPU;
+ writel(val32, langwell->regs + CI_OTGSC);
+
+ retval = device_create_file(&pdev->dev, &dev_attr_registers);
+ if (retval < 0) {
+ otg_dbg("Can't register sysfs attribute: %d\n", retval);
+ goto err;
+ }
+
+ retval = device_create_file(&pdev->dev, &dev_attr_hsm);
+ if (retval < 0) {
+ otg_dbg("Can't hsm sysfs attribute: %d\n", retval);
+ goto err;
+ }
+
+ retval = sysfs_create_group(&pdev->dev.kobj, &debug_dev_attr_group);
+ if (retval < 0) {
+ otg_dbg("Can't register sysfs attr group: %d\n", retval);
+ goto err;
+ }
+
+ if (langwell->otg.state == OTG_STATE_A_IDLE)
+ queue_work(langwell->qwork, &langwell->work);
+
+ return 0;
+
+err:
+ if (the_transceiver)
+ langwell_otg_remove(pdev);
+done:
+ return retval;
+}
+
+static void langwell_otg_remove(struct pci_dev *pdev)
+{
+ struct langwell_otg *langwell;
+
+ langwell = the_transceiver;
+
+ if (langwell->qwork) {
+ flush_workqueue(langwell->qwork);
+ destroy_workqueue(langwell->qwork);
+ }
+ langwell_otg_free_timers();
+
+ /* disable OTGSC interrupt as OTGSC doesn't change in reset */
+ writel(0, langwell->regs + CI_OTGSC);
+
+ if (pdev->irq)
+ free_irq(pdev->irq, langwell);
+ if (langwell->regs)
+ iounmap(langwell->regs);
+ if (langwell->region)
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+
+ otg_set_transceiver(NULL);
+ pci_disable_device(pdev);
+ sysfs_remove_group(&pdev->dev.kobj, &debug_dev_attr_group);
+ device_remove_file(&pdev->dev, &dev_attr_hsm);
+ device_remove_file(&pdev->dev, &dev_attr_registers);
+ kfree(langwell);
+ langwell = NULL;
+}
+
+static void transceiver_suspend(struct pci_dev *pdev)
+{
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+ langwell_otg_phy_low_power(1);
+}
+
+static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message)
+{
+ int ret = 0;
+ struct langwell_otg *langwell;
+
+ langwell = the_transceiver;
+
+ /* Disbale OTG interrupts */
+ langwell_otg_intr(0);
+
+ if (pdev->irq)
+ free_irq(pdev->irq, langwell);
+
+ /* Prevent more otg_work */
+ flush_workqueue(langwell->qwork);
+ spin_lock(&langwell->wq_lock);
+
+ /* start actions */
+ switch (langwell->otg.state) {
+ case OTG_STATE_A_IDLE:
+ case OTG_STATE_B_IDLE:
+ case OTG_STATE_A_WAIT_VFALL:
+ case OTG_STATE_A_VBUS_ERR:
+ transceiver_suspend(pdev);
+ break;
+ case OTG_STATE_A_WAIT_VRISE:
+ langwell_otg_del_timer(a_wait_vrise_tmr);
+ langwell->hsm.a_srp_det = 0;
+ langwell_otg_drv_vbus(0);
+ langwell->otg.state = OTG_STATE_A_IDLE;
+ transceiver_suspend(pdev);
+ break;
+ case OTG_STATE_A_WAIT_BCON:
+ langwell_otg_del_timer(a_wait_bcon_tmr);
+ if (langwell->host_ops)
+ ret = langwell->host_ops->suspend(pdev, message);
+ langwell_otg_drv_vbus(0);
+ break;
+ case OTG_STATE_A_HOST:
+ if (langwell->host_ops)
+ ret = langwell->host_ops->suspend(pdev, message);
+ langwell_otg_drv_vbus(0);
+ langwell_otg_phy_low_power(1);
+ break;
+ case OTG_STATE_A_SUSPEND:
+ langwell_otg_del_timer(a_aidl_bdis_tmr);
+ langwell_otg_HABA(0);
+ if (langwell->host_ops)
+ langwell->host_ops->remove(pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ transceiver_suspend(pdev);
+ langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+ break;
+ case OTG_STATE_A_PERIPHERAL:
+ if (langwell->client_ops)
+ ret = langwell->client_ops->suspend(pdev, message);
+ else
+ otg_dbg("client driver has been removed.\n");
+ langwell_otg_drv_vbus(0);
+ transceiver_suspend(pdev);
+ langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+ break;
+ case OTG_STATE_B_HOST:
+ if (langwell->host_ops)
+ langwell->host_ops->remove(pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell->hsm.b_bus_req = 0;
+ transceiver_suspend(pdev);
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ break;
+ case OTG_STATE_B_PERIPHERAL:
+ if (langwell->client_ops)
+ ret = langwell->client_ops->suspend(pdev, message);
+ else
+ otg_dbg("client driver has been removed.\n");
+ break;
+ case OTG_STATE_B_WAIT_ACON:
+ langwell_otg_del_timer(b_ase0_brst_tmr);
+ langwell_otg_HAAR(0);
+ if (langwell->host_ops)
+ langwell->host_ops->remove(pdev);
+ else
+ otg_dbg("host driver has been removed.\n");
+ langwell->hsm.b_bus_req = 0;
+ langwell->otg.state = OTG_STATE_B_IDLE;
+ transceiver_suspend(pdev);
+ break;
+ default:
+ otg_dbg("error state before suspend\n ");
+ break;
+ }
+ spin_unlock(&langwell->wq_lock);
+
+ return ret;
+}
+
+static void transceiver_resume(struct pci_dev *pdev)
+{
+ pci_restore_state(pdev);
+ pci_set_power_state(pdev, PCI_D0);
+ langwell_otg_phy_low_power(0);
+}
+
+static int langwell_otg_resume(struct pci_dev *pdev)
+{
+ int ret = 0;
+ struct langwell_otg *langwell;
+
+ langwell = the_transceiver;
+
+ spin_lock(&langwell->wq_lock);
+
+ switch (langwell->otg.state) {
+ case OTG_STATE_A_IDLE:
+ case OTG_STATE_B_IDLE:
+ case OTG_STATE_A_WAIT_VFALL:
+ case OTG_STATE_A_VBUS_ERR:
+ transceiver_resume(pdev);
+ break;
+ case OTG_STATE_A_WAIT_BCON:
+ langwell_otg_add_timer(a_wait_bcon_tmr);
+ langwell_otg_drv_vbus(1);
+ if (langwell->host_ops)
+ ret = langwell->host_ops->resume(pdev);
+ break;
+ case OTG_STATE_A_HOST:
+ langwell_otg_drv_vbus(1);
+ langwell_otg_phy_low_power(0);
+ if (langwell->host_ops)
+ ret = langwell->host_ops->resume(pdev);
+ break;
+ case OTG_STATE_B_PERIPHERAL:
+ if (langwell->client_ops)
+ ret = langwell->client_ops->resume(pdev);
+ else
+ otg_dbg("client driver not loaded.\n");
+ break;
+ default:
+ otg_dbg("error state before suspend\n ");
+ break;
+ }
+
+ if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
+ driver_name, the_transceiver) != 0) {
+ otg_dbg("request interrupt %d failed\n", pdev->irq);
+ ret = -EBUSY;
+ }
+
+ /* enable OTG interrupts */
+ langwell_otg_intr(1);
+
+ spin_unlock(&langwell->wq_lock);
+
+ queue_work(langwell->qwork, &langwell->work);
+
+
+ return ret;
+}
+
+static int __init langwell_otg_init(void)
+{
+ return pci_register_driver(&otg_pci_driver);
+}
+module_init(langwell_otg_init);
+
+static void __exit langwell_otg_cleanup(void)
+{
+ pci_unregister_driver(&otg_pci_driver);
+}
+module_exit(langwell_otg_cleanup);
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index c567168f89a..9ed5ea56867 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -22,8 +22,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Current status:
- * this is to add "nop" transceiver for all those phy which is
- * autonomous such as isp1504 etc.
+ * This provides a "nop" transceiver for PHYs which are
+ * autonomous such as isp1504, isp1707, etc.
*/
#include <linux/module.h>
@@ -36,30 +36,25 @@ struct nop_usb_xceiv {
struct device *dev;
};
-static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device nop_xceiv_device = {
- .name = "nop_usb_xceiv",
- .id = -1,
- .dev = {
- .dma_mask = &nop_xceiv_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = NULL,
- },
-};
+static struct platform_device *pd;
void usb_nop_xceiv_register(void)
{
- if (platform_device_register(&nop_xceiv_device) < 0) {
+ if (pd)
+ return;
+ pd = platform_device_register_simple("nop_usb_xceiv", -1, NULL, 0);
+ if (!pd) {
printk(KERN_ERR "Unable to register usb nop transceiver\n");
return;
}
}
+EXPORT_SYMBOL(usb_nop_xceiv_register);
void usb_nop_xceiv_unregister(void)
{
- platform_device_unregister(&nop_xceiv_device);
+ platform_device_unregister(pd);
}
+EXPORT_SYMBOL(usb_nop_xceiv_unregister);
static inline struct nop_usb_xceiv *xceiv_to_nop(struct otg_transceiver *x)
{
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index d9478d0e1c8..9e3e7a5c258 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -217,6 +217,7 @@
/* In module TWL4030_MODULE_PM_MASTER */
#define PROTECT_KEY 0x0E
+#define STS_HW_CONDITIONS 0x0F
/* In module TWL4030_MODULE_PM_RECEIVER */
#define VUSB_DEDICATED1 0x7D
@@ -351,15 +352,26 @@ static enum linkstat twl4030_usb_linkstat(struct twl4030_usb *twl)
int status;
int linkstat = USB_LINK_UNKNOWN;
- /* STS_HW_CONDITIONS */
- status = twl4030_readb(twl, TWL4030_MODULE_PM_MASTER, 0x0f);
+ /*
+ * For ID/VBUS sensing, see manual section 15.4.8 ...
+ * except when using only battery backup power, two
+ * comparators produce VBUS_PRES and ID_PRES signals,
+ * which don't match docs elsewhere. But ... BIT(7)
+ * and BIT(2) of STS_HW_CONDITIONS, respectively, do
+ * seem to match up. If either is true the USB_PRES
+ * signal is active, the OTG module is activated, and
+ * its interrupt may be raised (may wake the system).
+ */
+ status = twl4030_readb(twl, TWL4030_MODULE_PM_MASTER,
+ STS_HW_CONDITIONS);
if (status < 0)
dev_err(twl->dev, "USB link status err %d\n", status);
- else if (status & BIT(7))
- linkstat = USB_LINK_VBUS;
- else if (status & BIT(2))
- linkstat = USB_LINK_ID;
- else
+ else if (status & (BIT(7) | BIT(2))) {
+ if (status & BIT(2))
+ linkstat = USB_LINK_ID;
+ else
+ linkstat = USB_LINK_VBUS;
+ } else
linkstat = USB_LINK_NONE;
dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
@@ -641,7 +653,7 @@ static int twl4030_set_host(struct otg_transceiver *x, struct usb_bus *host)
return 0;
}
-static int __init twl4030_usb_probe(struct platform_device *pdev)
+static int __devinit twl4030_usb_probe(struct platform_device *pdev)
{
struct twl4030_usb_data *pdata = pdev->dev.platform_data;
struct twl4030_usb *twl;
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 6d106e74265..2cbfab3716e 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -364,7 +364,7 @@ static int aircable_attach(struct usb_serial *serial)
return 0;
}
-static void aircable_shutdown(struct usb_serial *serial)
+static void aircable_release(struct usb_serial *serial)
{
struct usb_serial_port *port = serial->port[0];
@@ -375,7 +375,6 @@ static void aircable_shutdown(struct usb_serial *serial)
if (priv) {
serial_buf_free(priv->tx_buf);
serial_buf_free(priv->rx_buf);
- usb_set_serial_port_data(port, NULL);
kfree(priv);
}
}
@@ -601,7 +600,7 @@ static struct usb_serial_driver aircable_device = {
.num_ports = 1,
.attach = aircable_attach,
.probe = aircable_probe,
- .shutdown = aircable_shutdown,
+ .release = aircable_release,
.write = aircable_write,
.write_room = aircable_write_room,
.write_bulk_callback = aircable_write_bulk_callback,
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 2bfd6dd85b5..7033b031b44 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -90,7 +90,7 @@ static int debug;
/* function prototypes for a Belkin USB Serial Adapter F5U103 */
static int belkin_sa_startup(struct usb_serial *serial);
-static void belkin_sa_shutdown(struct usb_serial *serial);
+static void belkin_sa_release(struct usb_serial *serial);
static int belkin_sa_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
static void belkin_sa_close(struct usb_serial_port *port);
@@ -142,7 +142,7 @@ static struct usb_serial_driver belkin_device = {
.tiocmget = belkin_sa_tiocmget,
.tiocmset = belkin_sa_tiocmset,
.attach = belkin_sa_startup,
- .shutdown = belkin_sa_shutdown,
+ .release = belkin_sa_release,
};
@@ -197,14 +197,13 @@ static int belkin_sa_startup(struct usb_serial *serial)
}
-static void belkin_sa_shutdown(struct usb_serial *serial)
+static void belkin_sa_release(struct usb_serial *serial)
{
struct belkin_sa_private *priv;
int i;
dbg("%s", __func__);
- /* stop reads and writes on all ports */
for (i = 0; i < serial->num_ports; ++i) {
/* My special items, the standard routines free my urbs */
priv = usb_get_serial_port_data(serial->port[i]);
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 83bbb5bca2e..ba555c528cc 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -59,23 +59,22 @@ static int usb_serial_device_probe(struct device *dev)
retval = -ENODEV;
goto exit;
}
+ if (port->dev_state != PORT_REGISTERING)
+ goto exit;
driver = port->serial->type;
if (driver->port_probe) {
- if (!try_module_get(driver->driver.owner)) {
- dev_err(dev, "module get failed, exiting\n");
- retval = -EIO;
- goto exit;
- }
retval = driver->port_probe(port);
- module_put(driver->driver.owner);
if (retval)
goto exit;
}
retval = device_create_file(dev, &dev_attr_port_number);
- if (retval)
+ if (retval) {
+ if (driver->port_remove)
+ retval = driver->port_remove(port);
goto exit;
+ }
minor = port->number;
tty_register_device(usb_serial_tty_driver, minor, dev);
@@ -98,19 +97,15 @@ static int usb_serial_device_remove(struct device *dev)
if (!port)
return -ENODEV;
+ if (port->dev_state != PORT_UNREGISTERING)
+ return retval;
+
device_remove_file(&port->dev, &dev_attr_port_number);
driver = port->serial->type;
- if (driver->port_remove) {
- if (!try_module_get(driver->driver.owner)) {
- dev_err(dev, "module get failed, exiting\n");
- retval = -EIO;
- goto exit;
- }
+ if (driver->port_remove)
retval = driver->port_remove(port);
- module_put(driver->driver.owner);
- }
-exit:
+
minor = port->number;
tty_unregister_device(usb_serial_tty_driver, minor);
dev_info(dev, "%s converter now disconnected from ttyUSB%d\n",
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 16a154d3b2f..2b9eeda62bf 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -50,7 +50,7 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
unsigned int, unsigned int);
static void cp210x_break_ctl(struct tty_struct *, int);
static int cp210x_startup(struct usb_serial *);
-static void cp210x_shutdown(struct usb_serial *);
+static void cp210x_disconnect(struct usb_serial *);
static int debug;
@@ -137,7 +137,7 @@ static struct usb_serial_driver cp210x_device = {
.tiocmget = cp210x_tiocmget,
.tiocmset = cp210x_tiocmset,
.attach = cp210x_startup,
- .shutdown = cp210x_shutdown,
+ .disconnect = cp210x_disconnect,
};
/* Config request types */
@@ -792,7 +792,7 @@ static int cp210x_startup(struct usb_serial *serial)
return 0;
}
-static void cp210x_shutdown(struct usb_serial *serial)
+static void cp210x_disconnect(struct usb_serial *serial)
{
int i;
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 933ba913e66..336523fd736 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -58,7 +58,8 @@ static int debug;
/* Function prototypes */
static int cyberjack_startup(struct usb_serial *serial);
-static void cyberjack_shutdown(struct usb_serial *serial);
+static void cyberjack_disconnect(struct usb_serial *serial);
+static void cyberjack_release(struct usb_serial *serial);
static int cyberjack_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
static void cyberjack_close(struct usb_serial_port *port);
@@ -94,7 +95,8 @@ static struct usb_serial_driver cyberjack_device = {
.id_table = id_table,
.num_ports = 1,
.attach = cyberjack_startup,
- .shutdown = cyberjack_shutdown,
+ .disconnect = cyberjack_disconnect,
+ .release = cyberjack_release,
.open = cyberjack_open,
.close = cyberjack_close,
.write = cyberjack_write,
@@ -148,17 +150,25 @@ static int cyberjack_startup(struct usb_serial *serial)
return 0;
}
-static void cyberjack_shutdown(struct usb_serial *serial)
+static void cyberjack_disconnect(struct usb_serial *serial)
{
int i;
dbg("%s", __func__);
- for (i = 0; i < serial->num_ports; ++i) {
+ for (i = 0; i < serial->num_ports; ++i)
usb_kill_urb(serial->port[i]->interrupt_in_urb);
+}
+
+static void cyberjack_release(struct usb_serial *serial)
+{
+ int i;
+
+ dbg("%s", __func__);
+
+ for (i = 0; i < serial->num_ports; ++i) {
/* My special items, the standard routines free my urbs */
kfree(usb_get_serial_port_data(serial->port[i]));
- usb_set_serial_port_data(serial->port[i], NULL);
}
}
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 669f9384853..9734085fd2f 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -171,7 +171,7 @@ struct cypress_buf {
static int cypress_earthmate_startup(struct usb_serial *serial);
static int cypress_hidcom_startup(struct usb_serial *serial);
static int cypress_ca42v2_startup(struct usb_serial *serial);
-static void cypress_shutdown(struct usb_serial *serial);
+static void cypress_release(struct usb_serial *serial);
static int cypress_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
static void cypress_close(struct usb_serial_port *port);
@@ -215,7 +215,7 @@ static struct usb_serial_driver cypress_earthmate_device = {
.id_table = id_table_earthmate,
.num_ports = 1,
.attach = cypress_earthmate_startup,
- .shutdown = cypress_shutdown,
+ .release = cypress_release,
.open = cypress_open,
.close = cypress_close,
.dtr_rts = cypress_dtr_rts,
@@ -242,7 +242,7 @@ static struct usb_serial_driver cypress_hidcom_device = {
.id_table = id_table_cyphidcomrs232,
.num_ports = 1,
.attach = cypress_hidcom_startup,
- .shutdown = cypress_shutdown,
+ .release = cypress_release,
.open = cypress_open,
.close = cypress_close,
.dtr_rts = cypress_dtr_rts,
@@ -269,7 +269,7 @@ static struct usb_serial_driver cypress_ca42v2_device = {
.id_table = id_table_nokiaca42v2,
.num_ports = 1,
.attach = cypress_ca42v2_startup,
- .shutdown = cypress_shutdown,
+ .release = cypress_release,
.open = cypress_open,
.close = cypress_close,
.dtr_rts = cypress_dtr_rts,
@@ -616,7 +616,7 @@ static int cypress_ca42v2_startup(struct usb_serial *serial)
} /* cypress_ca42v2_startup */
-static void cypress_shutdown(struct usb_serial *serial)
+static void cypress_release(struct usb_serial *serial)
{
struct cypress_private *priv;
@@ -629,7 +629,6 @@ static void cypress_shutdown(struct usb_serial *serial)
if (priv) {
cypress_buf_free(priv->buf);
kfree(priv);
- usb_set_serial_port_data(serial->port[0], NULL);
}
}
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 30f5140eff0..f4808091c47 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -460,7 +460,8 @@ static int digi_carrier_raised(struct usb_serial_port *port);
static void digi_dtr_rts(struct usb_serial_port *port, int on);
static int digi_startup_device(struct usb_serial *serial);
static int digi_startup(struct usb_serial *serial);
-static void digi_shutdown(struct usb_serial *serial);
+static void digi_disconnect(struct usb_serial *serial);
+static void digi_release(struct usb_serial *serial);
static void digi_read_bulk_callback(struct urb *urb);
static int digi_read_inb_callback(struct urb *urb);
static int digi_read_oob_callback(struct urb *urb);
@@ -524,7 +525,8 @@ static struct usb_serial_driver digi_acceleport_2_device = {
.tiocmget = digi_tiocmget,
.tiocmset = digi_tiocmset,
.attach = digi_startup,
- .shutdown = digi_shutdown,
+ .disconnect = digi_disconnect,
+ .release = digi_release,
};
static struct usb_serial_driver digi_acceleport_4_device = {
@@ -550,7 +552,8 @@ static struct usb_serial_driver digi_acceleport_4_device = {
.tiocmget = digi_tiocmget,
.tiocmset = digi_tiocmset,
.attach = digi_startup,
- .shutdown = digi_shutdown,
+ .disconnect = digi_disconnect,
+ .release = digi_release,
};
@@ -1556,16 +1559,23 @@ static int digi_startup(struct usb_serial *serial)
}
-static void digi_shutdown(struct usb_serial *serial)
+static void digi_disconnect(struct usb_serial *serial)
{
int i;
- dbg("digi_shutdown: TOP, in_interrupt()=%ld", in_interrupt());
+ dbg("digi_disconnect: TOP, in_interrupt()=%ld", in_interrupt());
/* stop reads and writes on all ports */
for (i = 0; i < serial->type->num_ports + 1; i++) {
usb_kill_urb(serial->port[i]->read_urb);
usb_kill_urb(serial->port[i]->write_urb);
}
+}
+
+
+static void digi_release(struct usb_serial *serial)
+{
+ int i;
+ dbg("digi_release: TOP, in_interrupt()=%ld", in_interrupt());
/* free the private data structures for all ports */
/* number of regular ports + 1 for the out-of-band port */
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 2b141ccb0cd..80cb3471adb 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -90,7 +90,6 @@ static int empeg_chars_in_buffer(struct tty_struct *tty);
static void empeg_throttle(struct tty_struct *tty);
static void empeg_unthrottle(struct tty_struct *tty);
static int empeg_startup(struct usb_serial *serial);
-static void empeg_shutdown(struct usb_serial *serial);
static void empeg_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios);
static void empeg_write_bulk_callback(struct urb *urb);
@@ -124,7 +123,6 @@ static struct usb_serial_driver empeg_device = {
.throttle = empeg_throttle,
.unthrottle = empeg_unthrottle,
.attach = empeg_startup,
- .shutdown = empeg_shutdown,
.set_termios = empeg_set_termios,
.write = empeg_write,
.write_room = empeg_write_room,
@@ -427,12 +425,6 @@ static int empeg_startup(struct usb_serial *serial)
}
-static void empeg_shutdown(struct usb_serial *serial)
-{
- dbg("%s", __func__);
-}
-
-
static void empeg_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 683304d6061..3dc3768ca71 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -47,7 +47,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.4.3"
+#define DRIVER_VERSION "v1.5.0"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
@@ -82,7 +82,8 @@ struct ftdi_private {
int rx_processed;
unsigned long rx_bytes;
- __u16 interface; /* FT2232C port interface (0 for FT232/245) */
+ __u16 interface; /* FT2232C, FT2232H or FT4232H port interface
+ (0 for FT232/245) */
speed_t force_baud; /* if non-zero, force the baud rate to
this value */
@@ -94,6 +95,7 @@ struct ftdi_private {
unsigned long tx_bytes;
unsigned long tx_outstanding_bytes;
unsigned long tx_outstanding_urbs;
+ unsigned short max_packet_size;
};
/* struct ftdi_sio_quirk is used by devices requiring special attention. */
@@ -164,6 +166,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
@@ -673,6 +676,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
@@ -693,12 +697,13 @@ static const char *ftdi_chip_name[] = {
[FT232BM] = "FT232BM",
[FT2232C] = "FT2232C",
[FT232RL] = "FT232RL",
+ [FT2232H] = "FT2232H",
+ [FT4232H] = "FT4232H"
};
/* Constants for read urb and write urb */
#define BUFSZ 512
-#define PKTSZ 64
/* rx_flags */
#define THROTTLED 0x01
@@ -715,7 +720,6 @@ static const char *ftdi_chip_name[] = {
/* function prototypes for a FTDI serial converter */
static int ftdi_sio_probe(struct usb_serial *serial,
const struct usb_device_id *id);
-static void ftdi_shutdown(struct usb_serial *serial);
static int ftdi_sio_port_probe(struct usb_serial_port *port);
static int ftdi_sio_port_remove(struct usb_serial_port *port);
static int ftdi_open(struct tty_struct *tty,
@@ -744,6 +748,8 @@ static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
static unsigned short int ftdi_232am_baud_to_divisor(int baud);
static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base);
static __u32 ftdi_232bm_baud_to_divisor(int baud);
+static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base);
+static __u32 ftdi_2232h_baud_to_divisor(int baud);
static struct usb_serial_driver ftdi_sio_device = {
.driver = {
@@ -772,7 +778,6 @@ static struct usb_serial_driver ftdi_sio_device = {
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
- .shutdown = ftdi_shutdown,
};
@@ -838,6 +843,36 @@ static __u32 ftdi_232bm_baud_to_divisor(int baud)
return ftdi_232bm_baud_base_to_divisor(baud, 48000000);
}
+static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
+{
+ static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
+ __u32 divisor;
+ int divisor3;
+
+ /* hi-speed baud rate is 10-bit sampling instead of 16-bit */
+ divisor3 = (base / 10 / baud) * 8;
+
+ divisor = divisor3 >> 3;
+ divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
+ /* Deal with special cases for highest baud rates. */
+ if (divisor == 1)
+ divisor = 0;
+ else if (divisor == 0x4001)
+ divisor = 1;
+ /*
+ * Set this bit to turn off a divide by 2.5 on baud rate generator
+ * This enables baud rates up to 12Mbaud but cannot reach below 1200
+ * baud with this bit set
+ */
+ divisor |= 0x00020000;
+ return divisor;
+}
+
+static __u32 ftdi_2232h_baud_to_divisor(int baud)
+{
+ return ftdi_2232h_baud_base_to_divisor(baud, 120000000);
+}
+
#define set_mctrl(port, set) update_mctrl((port), (set), 0)
#define clear_mctrl(port, clear) update_mctrl((port), 0, (clear))
@@ -996,6 +1031,19 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
baud = 9600;
}
break;
+ case FT2232H: /* FT2232H chip */
+ case FT4232H: /* FT4232H chip */
+ if ((baud <= 12000000) & (baud >= 1200)) {
+ div_value = ftdi_2232h_baud_to_divisor(baud);
+ } else if (baud < 1200) {
+ div_value = ftdi_232bm_baud_to_divisor(baud);
+ } else {
+ dbg("%s - Baud rate too high!", __func__);
+ div_value = ftdi_232bm_baud_to_divisor(9600);
+ div_okay = 0;
+ baud = 9600;
+ }
+ break;
} /* priv->chip_type */
if (div_okay) {
@@ -1196,14 +1244,29 @@ static void ftdi_determine_type(struct usb_serial_port *port)
if (interfaces > 1) {
int inter;
- /* Multiple interfaces. Assume FT2232C. */
- priv->chip_type = FT2232C;
+ /* Multiple interfaces.*/
+ if (version == 0x0800) {
+ priv->chip_type = FT4232H;
+ /* Hi-speed - baud clock runs at 120MHz */
+ priv->baud_base = 120000000 / 2;
+ } else if (version == 0x0700) {
+ priv->chip_type = FT2232H;
+ /* Hi-speed - baud clock runs at 120MHz */
+ priv->baud_base = 120000000 / 2;
+ } else
+ priv->chip_type = FT2232C;
+
/* Determine interface code. */
inter = serial->interface->altsetting->desc.bInterfaceNumber;
- if (inter == 0)
- priv->interface = PIT_SIOA;
- else
- priv->interface = PIT_SIOB;
+ if (inter == 0) {
+ priv->interface = INTERFACE_A;
+ } else if (inter == 1) {
+ priv->interface = INTERFACE_B;
+ } else if (inter == 2) {
+ priv->interface = INTERFACE_C;
+ } else if (inter == 3) {
+ priv->interface = INTERFACE_D;
+ }
/* BM-type devices have a bug where bcdDevice gets set
* to 0x200 when iSerialNumber is 0. */
if (version < 0x500) {
@@ -1231,6 +1294,45 @@ static void ftdi_determine_type(struct usb_serial_port *port)
}
+/* Determine the maximum packet size for the device. This depends on the chip
+ * type and the USB host capabilities. The value should be obtained from the
+ * device descriptor as the chip will use the appropriate values for the host.*/
+static void ftdi_set_max_packet_size(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ struct usb_device *udev = serial->dev;
+
+ struct usb_interface *interface = serial->interface;
+ struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
+
+ unsigned num_endpoints;
+ int i = 0;
+
+ num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
+ dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
+
+ /* NOTE: some customers have programmed FT232R/FT245R devices
+ * with an endpoint size of 0 - not good. In this case, we
+ * want to override the endpoint descriptor setting and use a
+ * value of 64 for wMaxPacketSize */
+ for (i = 0; i < num_endpoints; i++) {
+ dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1,
+ interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
+ ep_desc = &interface->cur_altsetting->endpoint[i].desc;
+ if (ep_desc->wMaxPacketSize == 0) {
+ ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
+ dev_info(&udev->dev, "Overriding wMaxPacketSize on endpoint %d\n", i);
+ }
+ }
+
+ /* set max packet size based on descriptor */
+ priv->max_packet_size = ep_desc->wMaxPacketSize;
+
+ dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
+}
+
+
/*
* ***************************************************************************
* Sysfs Attribute
@@ -1314,7 +1416,9 @@ static int create_sysfs_attrs(struct usb_serial_port *port)
if ((!retval) &&
(priv->chip_type == FT232BM ||
priv->chip_type == FT2232C ||
- priv->chip_type == FT232RL)) {
+ priv->chip_type == FT232RL ||
+ priv->chip_type == FT2232H ||
+ priv->chip_type == FT4232H)) {
retval = device_create_file(&port->dev,
&dev_attr_latency_timer);
}
@@ -1333,7 +1437,9 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
device_remove_file(&port->dev, &dev_attr_event_char);
if (priv->chip_type == FT232BM ||
priv->chip_type == FT2232C ||
- priv->chip_type == FT232RL) {
+ priv->chip_type == FT232RL ||
+ priv->chip_type == FT2232H ||
+ priv->chip_type == FT4232H) {
device_remove_file(&port->dev, &dev_attr_latency_timer);
}
}
@@ -1416,6 +1522,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
usb_set_serial_port_data(port, priv);
ftdi_determine_type(port);
+ ftdi_set_max_packet_size(port);
read_latency_timer(port);
create_sysfs_attrs(port);
return 0;
@@ -1485,18 +1592,6 @@ static int ftdi_mtxorb_hack_setup(struct usb_serial *serial)
return 0;
}
-/* ftdi_shutdown is called from usbserial:usb_serial_disconnect
- * it is called when the usb device is disconnected
- *
- * usbserial:usb_serial_disconnect
- * calls __serial_close for each open of the port
- * shutdown is called then (ie ftdi_shutdown)
- */
-static void ftdi_shutdown(struct usb_serial *serial)
-{
- dbg("%s", __func__);
-}
-
static void ftdi_sio_priv_release(struct kref *k)
{
struct ftdi_private *priv = container_of(k, struct ftdi_private, kref);
@@ -1671,8 +1766,8 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
if (data_offset > 0) {
/* Original sio needs control bytes too... */
transfer_size += (data_offset *
- ((count + (PKTSZ - 1 - data_offset)) /
- (PKTSZ - data_offset)));
+ ((count + (priv->max_packet_size - 1 - data_offset)) /
+ (priv->max_packet_size - data_offset)));
}
buffer = kmalloc(transfer_size, GFP_ATOMIC);
@@ -1694,7 +1789,7 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
if (data_offset > 0) {
/* Original sio requires control byte at start of
each packet. */
- int user_pktsz = PKTSZ - data_offset;
+ int user_pktsz = priv->max_packet_size - data_offset;
int todo = count;
unsigned char *first_byte = buffer;
const unsigned char *current_position = buf;
@@ -1775,11 +1870,6 @@ static void ftdi_write_bulk_callback(struct urb *urb)
dbg("%s - port %d", __func__, port->number);
- if (status) {
- dbg("nonzero write bulk status received: %d", status);
- return;
- }
-
priv = usb_get_serial_port_data(port);
if (!priv) {
dbg("%s - bad port private data pointer - exiting", __func__);
@@ -1790,13 +1880,18 @@ static void ftdi_write_bulk_callback(struct urb *urb)
data_offset = priv->write_offset;
if (data_offset > 0) {
/* Subtract the control bytes */
- countback -= (data_offset * DIV_ROUND_UP(countback, PKTSZ));
+ countback -= (data_offset * DIV_ROUND_UP(countback, priv->max_packet_size));
}
spin_lock_irqsave(&priv->tx_lock, flags);
--priv->tx_outstanding_urbs;
priv->tx_outstanding_bytes -= countback;
spin_unlock_irqrestore(&priv->tx_lock, flags);
+ if (status) {
+ dbg("nonzero write bulk status received: %d", status);
+ return;
+ }
+
usb_serial_port_softint(port);
} /* ftdi_write_bulk_callback */
@@ -1892,7 +1987,7 @@ static void ftdi_read_bulk_callback(struct urb *urb)
/* count data bytes, but not status bytes */
countread = urb->actual_length;
- countread -= 2 * DIV_ROUND_UP(countread, PKTSZ);
+ countread -= 2 * DIV_ROUND_UP(countread, priv->max_packet_size);
spin_lock_irqsave(&priv->rx_lock, flags);
priv->rx_bytes += countread;
spin_unlock_irqrestore(&priv->rx_lock, flags);
@@ -1965,7 +2060,7 @@ static void ftdi_process_read(struct work_struct *work)
need_flip = 0;
for (packet_offset = priv->rx_processed;
- packet_offset < urb->actual_length; packet_offset += PKTSZ) {
+ packet_offset < urb->actual_length; packet_offset += priv->max_packet_size) {
int length;
/* Compare new line status to the old one, signal if different/
@@ -1980,7 +2075,7 @@ static void ftdi_process_read(struct work_struct *work)
priv->prev_status = new_status;
}
- length = min_t(u32, PKTSZ, urb->actual_length-packet_offset)-2;
+ length = min_t(u32, priv->max_packet_size, urb->actual_length-packet_offset)-2;
if (length < 0) {
dev_err(&port->dev, "%s - bad packet length: %d\n",
__func__, length+2);
@@ -2011,6 +2106,7 @@ static void ftdi_process_read(struct work_struct *work)
if (data[packet_offset+1] & FTDI_RS_BI) {
error_flag = TTY_BREAK;
dbg("BREAK received");
+ usb_serial_handle_break(port);
}
if (data[packet_offset+1] & FTDI_RS_PE) {
error_flag = TTY_PARITY;
@@ -2025,8 +2121,11 @@ static void ftdi_process_read(struct work_struct *work)
/* Note that the error flag is duplicated for
every character received since we don't know
which character it applied to */
- tty_insert_flip_char(tty,
- data[packet_offset + i], error_flag);
+ if (!usb_serial_handle_sysrq_char(port,
+ data[packet_offset + i]))
+ tty_insert_flip_char(tty,
+ data[packet_offset + i],
+ error_flag);
}
need_flip = 1;
}
@@ -2332,6 +2431,8 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
case FT232BM:
case FT2232C:
case FT232RL:
+ case FT2232H:
+ case FT4232H:
/* the 8U232AM returns a two byte value (the sio is a 1 byte
value) - in the same format as the data returned from the in
point */
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 12330fa1c09..f1d440a728a 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -10,7 +10,7 @@
* The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side,
* USB on the other.
*
- * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details
+ * Thanx to FTDI (http://www.ftdichip.com) for so kindly providing details
* of the protocol required to talk to the device and ongoing assistence
* during development.
*
@@ -28,11 +28,15 @@
#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
+#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */
#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */
+/* Larsen and Brusgaard AltiTrack/USBtrack */
+#define LARSENBRUSGAARD_VID 0x0FD8
+#define LB_ALTITRACK_PID 0x0001
/* www.canusb.com Lawicel CANUSB device */
#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
@@ -873,6 +877,11 @@
#define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */
#define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */
+/* Interface indicies for FT2232, FT2232H and FT4232H devices*/
+#define INTERFACE_A 1
+#define INTERFACE_B 2
+#define INTERFACE_C 3
+#define INTERFACE_D 4
/*
* FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
@@ -1036,6 +1045,8 @@ typedef enum {
FT232BM = 3,
FT2232C = 4,
FT232RL = 5,
+ FT2232H = 6,
+ FT4232H = 7
} ftdi_chip_type_t;
typedef enum {
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index ee25a3fe3b0..8839f1c70b7 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1,7 +1,7 @@
/*
* Garmin GPS driver
*
- * Copyright (C) 2006,2007 Hermann Kneissel herkne@users.sourceforge.net
+ * Copyright (C) 2006-2009 Hermann Kneissel herkne@users.sourceforge.net
*
* The latest version of the driver can be found at
* http://sourceforge.net/projects/garmin-gps/
@@ -51,7 +51,7 @@ static int debug;
*/
#define VERSION_MAJOR 0
-#define VERSION_MINOR 31
+#define VERSION_MINOR 33
#define _STR(s) #s
#define _DRIVER_VERSION(a, b) "v" _STR(a) "." _STR(b)
@@ -129,7 +129,6 @@ struct garmin_data {
__u8 state;
__u16 flags;
__u8 mode;
- __u8 ignorePkts;
__u8 count;
__u8 pkt_id;
__u32 serial_num;
@@ -141,8 +140,6 @@ struct garmin_data {
__u8 inbuffer [GPS_IN_BUFSIZ]; /* tty -> usb */
__u8 outbuffer[GPS_OUT_BUFSIZ]; /* usb -> tty */
__u8 privpkt[4*6];
- atomic_t req_count;
- atomic_t resp_count;
spinlock_t lock;
struct list_head pktlist;
};
@@ -170,6 +167,8 @@ struct garmin_data {
#define FLAGS_BULK_IN_ACTIVE 0x0020
#define FLAGS_BULK_IN_RESTART 0x0010
#define FLAGS_THROTTLED 0x0008
+#define APP_REQ_SEEN 0x0004
+#define APP_RESP_SEEN 0x0002
#define CLEAR_HALT_REQUIRED 0x0001
#define FLAGS_QUEUING 0x0100
@@ -184,20 +183,16 @@ struct garmin_data {
/* function prototypes */
-static void gsp_next_packet(struct garmin_data *garmin_data_p);
-static int garmin_write_bulk(struct usb_serial_port *port,
+static int gsp_next_packet(struct garmin_data *garmin_data_p);
+static int garmin_write_bulk(struct usb_serial_port *port,
const unsigned char *buf, int count,
int dismiss_ack);
/* some special packets to be send or received */
static unsigned char const GARMIN_START_SESSION_REQ[]
= { 0, 0, 0, 0, 5, 0, 0, 0, 0, 0, 0, 0 };
-static unsigned char const GARMIN_START_SESSION_REQ2[]
- = { 0, 0, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 };
static unsigned char const GARMIN_START_SESSION_REPLY[]
= { 0, 0, 0, 0, 6, 0, 0, 0, 4, 0, 0, 0 };
-static unsigned char const GARMIN_SESSION_ACTIVE_REPLY[]
- = { 0, 0, 0, 0, 17, 0, 0, 0, 4, 0, 0, 0, 0, 16, 0, 0 };
static unsigned char const GARMIN_BULK_IN_AVAIL_REPLY[]
= { 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0 };
static unsigned char const GARMIN_APP_LAYER_REPLY[]
@@ -233,13 +228,6 @@ static struct usb_driver garmin_driver = {
};
-static inline int noResponseFromAppLayer(struct garmin_data *garmin_data_p)
-{
- return atomic_read(&garmin_data_p->req_count) ==
- atomic_read(&garmin_data_p->resp_count);
-}
-
-
static inline int getLayerId(const __u8 *usbPacket)
{
return __le32_to_cpup((__le32 *)(usbPacket));
@@ -325,8 +313,11 @@ static int pkt_add(struct garmin_data *garmin_data_p,
state = garmin_data_p->state;
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+ dbg("%s - added: pkt: %d - %d bytes",
+ __func__, pkt->seq, data_length);
+
/* in serial mode, if someone is waiting for data from
- the device, iconvert and send the next packet to tty. */
+ the device, convert and send the next packet to tty. */
if (result && (state == STATE_GSP_WAIT_DATA))
gsp_next_packet(garmin_data_p);
}
@@ -411,7 +402,7 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id)
/*
* called for a complete packet received from tty layer
*
- * the complete packet (pkzid ... cksum) is in garmin_data_p->inbuf starting
+ * the complete packet (pktid ... cksum) is in garmin_data_p->inbuf starting
* at GSP_INITIAL_OFFSET.
*
* count - number of bytes in the input buffer including space reserved for
@@ -501,7 +492,6 @@ static int gsp_receive(struct garmin_data *garmin_data_p,
unsigned long flags;
int offs = 0;
int ack_or_nak_seen = 0;
- int i = 0;
__u8 *dest;
int size;
/* dleSeen: set if last byte read was a DLE */
@@ -519,8 +509,8 @@ static int gsp_receive(struct garmin_data *garmin_data_p,
skip = garmin_data_p->flags & FLAGS_GSP_SKIP;
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
- dbg("%s - dle=%d skip=%d size=%d count=%d",
- __func__, dleSeen, skip, size, count);
+ /* dbg("%s - dle=%d skip=%d size=%d count=%d",
+ __func__, dleSeen, skip, size, count); */
if (size == 0)
size = GSP_INITIAL_OFFSET;
@@ -568,7 +558,6 @@ static int gsp_receive(struct garmin_data *garmin_data_p,
} else if (!skip) {
if (dleSeen) {
- dbg("non-masked DLE at %d - restarting", i);
size = GSP_INITIAL_OFFSET;
dleSeen = 0;
}
@@ -599,19 +588,19 @@ static int gsp_receive(struct garmin_data *garmin_data_p,
else
garmin_data_p->flags &= ~FLAGS_GSP_DLESEEN;
- if (ack_or_nak_seen)
- garmin_data_p->state = STATE_GSP_WAIT_DATA;
-
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
- if (ack_or_nak_seen)
- gsp_next_packet(garmin_data_p);
+ if (ack_or_nak_seen) {
+ if (gsp_next_packet(garmin_data_p) > 0)
+ garmin_data_p->state = STATE_ACTIVE;
+ else
+ garmin_data_p->state = STATE_GSP_WAIT_DATA;
+ }
return count;
}
-
/*
* Sends a usb packet to the tty
*
@@ -733,29 +722,28 @@ static int gsp_send(struct garmin_data *garmin_data_p,
}
-
-
-
/*
* Process the next pending data packet - if there is one
*/
-static void gsp_next_packet(struct garmin_data *garmin_data_p)
+static int gsp_next_packet(struct garmin_data *garmin_data_p)
{
+ int result = 0;
struct garmin_packet *pkt = NULL;
while ((pkt = pkt_pop(garmin_data_p)) != NULL) {
dbg("%s - next pkt: %d", __func__, pkt->seq);
- if (gsp_send(garmin_data_p, pkt->data, pkt->size) > 0) {
+ result = gsp_send(garmin_data_p, pkt->data, pkt->size);
+ if (result > 0) {
kfree(pkt);
- return;
+ return result;
}
kfree(pkt);
}
+ return result;
}
-
/******************************************************************************
* garmin native mode
******************************************************************************/
@@ -888,14 +876,6 @@ static int garmin_clear(struct garmin_data *garmin_data_p)
unsigned long flags;
int status = 0;
- struct usb_serial_port *port = garmin_data_p->port;
-
- if (port != NULL && atomic_read(&garmin_data_p->resp_count)) {
- /* send a terminate command */
- status = garmin_write_bulk(port, GARMIN_STOP_TRANSFER_REQ,
- sizeof(GARMIN_STOP_TRANSFER_REQ), 1);
- }
-
/* flush all queued data */
pkt_clear(garmin_data_p);
@@ -908,16 +888,12 @@ static int garmin_clear(struct garmin_data *garmin_data_p)
}
-
-
-
-
static int garmin_init_session(struct usb_serial_port *port)
{
- unsigned long flags;
struct usb_serial *serial = port->serial;
struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
int status = 0;
+ int i = 0;
if (status == 0) {
usb_kill_urb(port->interrupt_in_urb);
@@ -931,30 +907,25 @@ static int garmin_init_session(struct usb_serial_port *port)
__func__, status);
}
+ /*
+ * using the initialization method from gpsbabel. See comments in
+ * gpsbabel/jeeps/gpslibusb.c gusb_reset_toggles()
+ */
if (status == 0) {
dbg("%s - starting session ...", __func__);
garmin_data_p->state = STATE_ACTIVE;
- status = garmin_write_bulk(port, GARMIN_START_SESSION_REQ,
- sizeof(GARMIN_START_SESSION_REQ), 0);
-
- if (status >= 0) {
-
- spin_lock_irqsave(&garmin_data_p->lock, flags);
- garmin_data_p->ignorePkts++;
- spin_unlock_irqrestore(&garmin_data_p->lock, flags);
- /* not needed, but the win32 driver does it too ... */
+ for (i = 0; i < 3; i++) {
status = garmin_write_bulk(port,
- GARMIN_START_SESSION_REQ2,
- sizeof(GARMIN_START_SESSION_REQ2), 0);
- if (status >= 0) {
- status = 0;
- spin_lock_irqsave(&garmin_data_p->lock, flags);
- garmin_data_p->ignorePkts++;
- spin_unlock_irqrestore(&garmin_data_p->lock,
- flags);
- }
+ GARMIN_START_SESSION_REQ,
+ sizeof(GARMIN_START_SESSION_REQ), 0);
+
+ if (status < 0)
+ break;
}
+
+ if (status > 0)
+ status = 0;
}
return status;
@@ -962,8 +933,6 @@ static int garmin_init_session(struct usb_serial_port *port)
-
-
static int garmin_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp)
{
@@ -977,8 +946,6 @@ static int garmin_open(struct tty_struct *tty,
garmin_data_p->mode = initial_mode;
garmin_data_p->count = 0;
garmin_data_p->flags = 0;
- atomic_set(&garmin_data_p->req_count, 0);
- atomic_set(&garmin_data_p->resp_count, 0);
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
/* shutdown any bulk reads that might be going on */
@@ -1006,6 +973,7 @@ static void garmin_close(struct usb_serial_port *port)
return;
mutex_lock(&port->serial->disc_mutex);
+
if (!port->serial->disconnected)
garmin_clear(garmin_data_p);
@@ -1013,25 +981,17 @@ static void garmin_close(struct usb_serial_port *port)
usb_kill_urb(port->read_urb);
usb_kill_urb(port->write_urb);
- if (!port->serial->disconnected) {
- if (noResponseFromAppLayer(garmin_data_p) ||
- ((garmin_data_p->flags & CLEAR_HALT_REQUIRED) != 0)) {
- process_resetdev_request(port);
- garmin_data_p->state = STATE_RESET;
- } else {
- garmin_data_p->state = STATE_DISCONNECTED;
- }
- } else {
+ /* keep reset state so we know that we must start a new session */
+ if (garmin_data_p->state != STATE_RESET)
garmin_data_p->state = STATE_DISCONNECTED;
- }
+
mutex_unlock(&port->serial->disc_mutex);
}
+
static void garmin_write_bulk_callback(struct urb *urb)
{
- unsigned long flags;
struct usb_serial_port *port = urb->context;
- int status = urb->status;
if (port) {
struct garmin_data *garmin_data_p =
@@ -1039,20 +999,13 @@ static void garmin_write_bulk_callback(struct urb *urb)
dbg("%s - port %d", __func__, port->number);
- if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)
- && (garmin_data_p->mode == MODE_GARMIN_SERIAL)) {
- gsp_send_ack(garmin_data_p,
- ((__u8 *)urb->transfer_buffer)[4]);
- }
+ if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)) {
- if (status) {
- dbg("%s - nonzero write bulk status received: %d",
- __func__, status);
- spin_lock_irqsave(&garmin_data_p->lock, flags);
- garmin_data_p->flags |= CLEAR_HALT_REQUIRED;
- spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+ if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
+ gsp_send_ack(garmin_data_p,
+ ((__u8 *)urb->transfer_buffer)[4]);
+ }
}
-
usb_serial_port_softint(port);
}
@@ -1108,7 +1061,11 @@ static int garmin_write_bulk(struct usb_serial_port *port,
urb->transfer_flags |= URB_ZERO_PACKET;
if (GARMIN_LAYERID_APPL == getLayerId(buffer)) {
- atomic_inc(&garmin_data_p->req_count);
+
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
+ garmin_data_p->flags |= APP_REQ_SEEN;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
pkt_clear(garmin_data_p);
garmin_data_p->state = STATE_GSP_WAIT_DATA;
@@ -1140,6 +1097,9 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
usb_serial_debug_data(debug, &port->dev, __func__, count, buf);
+ if (garmin_data_p->state == STATE_RESET)
+ return -EIO;
+
/* check for our private packets */
if (count >= GARMIN_PKTHDR_LENGTH) {
len = PRIVPKTSIZ;
@@ -1184,7 +1144,7 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
break;
case PRIV_PKTID_RESET_REQ:
- atomic_inc(&garmin_data_p->req_count);
+ process_resetdev_request(port);
break;
case PRIV_PKTID_SET_DEF_MODE:
@@ -1200,8 +1160,6 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
}
}
- garmin_data_p->ignorePkts = 0;
-
if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
return gsp_receive(garmin_data_p, buf, count);
} else { /* MODE_NATIVE */
@@ -1224,31 +1182,33 @@ static int garmin_write_room(struct tty_struct *tty)
static void garmin_read_process(struct garmin_data *garmin_data_p,
unsigned char *data, unsigned data_length)
{
+ unsigned long flags;
+
if (garmin_data_p->flags & FLAGS_DROP_DATA) {
/* abort-transfer cmd is actice */
dbg("%s - pkt dropped", __func__);
} else if (garmin_data_p->state != STATE_DISCONNECTED &&
garmin_data_p->state != STATE_RESET) {
- /* remember any appl.layer packets, so we know
- if a reset is required or not when closing
- the device */
- if (0 == memcmp(data, GARMIN_APP_LAYER_REPLY,
- sizeof(GARMIN_APP_LAYER_REPLY))) {
- atomic_inc(&garmin_data_p->resp_count);
- }
-
/* if throttling is active or postprecessing is required
put the received data in the input queue, otherwise
send it directly to the tty port */
if (garmin_data_p->flags & FLAGS_QUEUING) {
pkt_add(garmin_data_p, data, data_length);
- } else if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
- if (getLayerId(data) == GARMIN_LAYERID_APPL)
+ } else if (getLayerId(data) == GARMIN_LAYERID_APPL) {
+
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
+ garmin_data_p->flags |= APP_RESP_SEEN;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
+ if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
pkt_add(garmin_data_p, data, data_length);
- } else {
- send_to_tty(garmin_data_p->port, data, data_length);
+ } else {
+ send_to_tty(garmin_data_p->port, data,
+ data_length);
+ }
}
+ /* ignore system layer packets ... */
}
}
@@ -1363,8 +1323,6 @@ static void garmin_read_int_callback(struct urb *urb)
} else {
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags |= FLAGS_BULK_IN_ACTIVE;
- /* do not send this packet to the user */
- garmin_data_p->ignorePkts = 1;
spin_unlock_irqrestore(&garmin_data_p->lock,
flags);
}
@@ -1391,17 +1349,7 @@ static void garmin_read_int_callback(struct urb *urb)
__func__, garmin_data_p->serial_num);
}
- if (garmin_data_p->ignorePkts) {
- /* this reply belongs to a request generated by the driver,
- ignore it. */
- dbg("%s - pkt ignored (%d)",
- __func__, garmin_data_p->ignorePkts);
- spin_lock_irqsave(&garmin_data_p->lock, flags);
- garmin_data_p->ignorePkts--;
- spin_unlock_irqrestore(&garmin_data_p->lock, flags);
- } else {
- garmin_read_process(garmin_data_p, data, urb->actual_length);
- }
+ garmin_read_process(garmin_data_p, data, urb->actual_length);
port->interrupt_in_urb->dev = port->serial->dev;
retval = usb_submit_urb(urb, GFP_ATOMIC);
@@ -1527,7 +1475,7 @@ static int garmin_attach(struct usb_serial *serial)
}
-static void garmin_shutdown(struct usb_serial *serial)
+static void garmin_disconnect(struct usb_serial *serial)
{
struct usb_serial_port *port = serial->port[0];
struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
@@ -1536,8 +1484,17 @@ static void garmin_shutdown(struct usb_serial *serial)
usb_kill_urb(port->interrupt_in_urb);
del_timer_sync(&garmin_data_p->timer);
+}
+
+
+static void garmin_release(struct usb_serial *serial)
+{
+ struct usb_serial_port *port = serial->port[0];
+ struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
+
+ dbg("%s", __func__);
+
kfree(garmin_data_p);
- usb_set_serial_port_data(port, NULL);
}
@@ -1556,7 +1513,8 @@ static struct usb_serial_driver garmin_device = {
.throttle = garmin_throttle,
.unthrottle = garmin_unthrottle,
.attach = garmin_attach,
- .shutdown = garmin_shutdown,
+ .disconnect = garmin_disconnect,
+ .release = garmin_release,
.write = garmin_write,
.write_room = garmin_write_room,
.write_bulk_callback = garmin_write_bulk_callback,
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index be82ea95672..932d6241b78 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -63,7 +63,8 @@ struct usb_serial_driver usb_serial_generic_device = {
.id_table = generic_device_ids,
.usb_driver = &generic_driver,
.num_ports = 1,
- .shutdown = usb_serial_generic_shutdown,
+ .disconnect = usb_serial_generic_disconnect,
+ .release = usb_serial_generic_release,
.throttle = usb_serial_generic_throttle,
.unthrottle = usb_serial_generic_unthrottle,
.resume = usb_serial_generic_resume,
@@ -190,6 +191,88 @@ void usb_serial_generic_close(struct usb_serial_port *port)
generic_cleanup(port);
}
+static int usb_serial_multi_urb_write(struct tty_struct *tty,
+ struct usb_serial_port *port, const unsigned char *buf, int count)
+{
+ unsigned long flags;
+ struct urb *urb;
+ unsigned char *buffer;
+ int status;
+ int towrite;
+ int bwrite = 0;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ if (count == 0)
+ dbg("%s - write request of 0 bytes", __func__);
+
+ while (count > 0) {
+ towrite = (count > port->bulk_out_size) ?
+ port->bulk_out_size : count;
+ spin_lock_irqsave(&port->lock, flags);
+ if (port->urbs_in_flight >
+ port->serial->type->max_in_flight_urbs) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ dbg("%s - write limit hit\n", __func__);
+ return bwrite;
+ }
+ port->tx_bytes_flight += towrite;
+ port->urbs_in_flight++;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ buffer = kmalloc(towrite, GFP_ATOMIC);
+ if (!buffer) {
+ dev_err(&port->dev,
+ "%s ran out of kernel memory for urb ...\n", __func__);
+ goto error_no_buffer;
+ }
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ dev_err(&port->dev, "%s - no more free urbs\n",
+ __func__);
+ goto error_no_urb;
+ }
+
+ /* Copy data */
+ memcpy(buffer, buf + bwrite, towrite);
+ usb_serial_debug_data(debug, &port->dev, __func__,
+ towrite, buffer);
+ /* fill the buffer and send it */
+ usb_fill_bulk_urb(urb, port->serial->dev,
+ usb_sndbulkpipe(port->serial->dev,
+ port->bulk_out_endpointAddress),
+ buffer, towrite,
+ usb_serial_generic_write_bulk_callback, port);
+
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status) {
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, status);
+ goto error;
+ }
+
+ /* This urb is the responsibility of the host driver now */
+ usb_free_urb(urb);
+ dbg("%s write: %d", __func__, towrite);
+ count -= towrite;
+ bwrite += towrite;
+ }
+ return bwrite;
+
+error:
+ usb_free_urb(urb);
+error_no_urb:
+ kfree(buffer);
+error_no_buffer:
+ spin_lock_irqsave(&port->lock, flags);
+ port->urbs_in_flight--;
+ port->tx_bytes_flight -= towrite;
+ spin_unlock_irqrestore(&port->lock, flags);
+ return bwrite;
+}
+
int usb_serial_generic_write(struct tty_struct *tty,
struct usb_serial_port *port, const unsigned char *buf, int count)
{
@@ -207,6 +290,11 @@ int usb_serial_generic_write(struct tty_struct *tty,
/* only do something if we have a bulk out endpoint */
if (serial->num_bulk_out) {
unsigned long flags;
+
+ if (serial->type->max_in_flight_urbs)
+ return usb_serial_multi_urb_write(tty, port,
+ buf, count);
+
spin_lock_irqsave(&port->lock, flags);
if (port->write_urb_busy) {
spin_unlock_irqrestore(&port->lock, flags);
@@ -252,20 +340,26 @@ int usb_serial_generic_write(struct tty_struct *tty,
/* no bulk out, so return 0 bytes written */
return 0;
}
+EXPORT_SYMBOL_GPL(usb_serial_generic_write);
int usb_serial_generic_write_room(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
+ unsigned long flags;
int room = 0;
dbg("%s - port %d", __func__, port->number);
-
- /* FIXME: Locking */
- if (serial->num_bulk_out) {
- if (!(port->write_urb_busy))
- room = port->bulk_out_size;
+ spin_lock_irqsave(&port->lock, flags);
+ if (serial->type->max_in_flight_urbs) {
+ if (port->urbs_in_flight < serial->type->max_in_flight_urbs)
+ room = port->bulk_out_size *
+ (serial->type->max_in_flight_urbs -
+ port->urbs_in_flight);
+ } else if (serial->num_bulk_out && !(port->write_urb_busy)) {
+ room = port->bulk_out_size;
}
+ spin_unlock_irqrestore(&port->lock, flags);
dbg("%s - returns %d", __func__, room);
return room;
@@ -276,11 +370,16 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
int chars = 0;
+ unsigned long flags;
dbg("%s - port %d", __func__, port->number);
- /* FIXME: Locking */
- if (serial->num_bulk_out) {
+ if (serial->type->max_in_flight_urbs) {
+ spin_lock_irqsave(&port->lock, flags);
+ chars = port->tx_bytes_flight;
+ spin_unlock_irqrestore(&port->lock, flags);
+ } else if (serial->num_bulk_out) {
+ /* FIXME: Locking */
if (port->write_urb_busy)
chars = port->write_urb->transfer_buffer_length;
}
@@ -290,7 +389,8 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
}
-static void resubmit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
+void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port,
+ gfp_t mem_flags)
{
struct urb *urb = port->read_urb;
struct usb_serial *serial = port->serial;
@@ -311,25 +411,28 @@ static void resubmit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
"%s - failed resubmitting read urb, error %d\n",
__func__, result);
}
+EXPORT_SYMBOL_GPL(usb_serial_generic_resubmit_read_urb);
/* Push data to tty layer and resubmit the bulk read URB */
static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
{
struct urb *urb = port->read_urb;
struct tty_struct *tty = tty_port_tty_get(&port->port);
- int room;
+ char *ch = (char *)urb->transfer_buffer;
+ int i;
+
+ if (!tty)
+ goto done;
/* Push data to tty */
- if (tty && urb->actual_length) {
- room = tty_buffer_request_room(tty, urb->actual_length);
- if (room) {
- tty_insert_flip_string(tty, urb->transfer_buffer, room);
- tty_flip_buffer_push(tty);
- }
+ for (i = 0; i < urb->actual_length; i++, ch++) {
+ if (!usb_serial_handle_sysrq_char(port, *ch))
+ tty_insert_flip_char(tty, *ch, TTY_NORMAL);
}
+ tty_flip_buffer_push(tty);
tty_kref_put(tty);
-
- resubmit_read_urb(port, GFP_ATOMIC);
+done:
+ usb_serial_generic_resubmit_read_urb(port, GFP_ATOMIC);
}
void usb_serial_generic_read_bulk_callback(struct urb *urb)
@@ -363,12 +466,24 @@ EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
void usb_serial_generic_write_bulk_callback(struct urb *urb)
{
+ unsigned long flags;
struct usb_serial_port *port = urb->context;
int status = urb->status;
dbg("%s - port %d", __func__, port->number);
- port->write_urb_busy = 0;
+ if (port->serial->type->max_in_flight_urbs) {
+ spin_lock_irqsave(&port->lock, flags);
+ --port->urbs_in_flight;
+ port->tx_bytes_flight -= urb->transfer_buffer_length;
+ if (port->urbs_in_flight < 0)
+ port->urbs_in_flight = 0;
+ spin_unlock_irqrestore(&port->lock, flags);
+ } else {
+ /* Handle the case for single urb mode */
+ port->write_urb_busy = 0;
+ }
+
if (status) {
dbg("%s - nonzero write bulk status received: %d",
__func__, status);
@@ -408,11 +523,36 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty)
if (was_throttled) {
/* Resume reading from device */
- resubmit_read_urb(port, GFP_KERNEL);
+ usb_serial_generic_resubmit_read_urb(port, GFP_KERNEL);
+ }
+}
+
+int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch)
+{
+ if (port->sysrq && port->console) {
+ if (ch && time_before(jiffies, port->sysrq)) {
+ handle_sysrq(ch, tty_port_tty_get(&port->port));
+ port->sysrq = 0;
+ return 1;
+ }
+ port->sysrq = 0;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_serial_handle_sysrq_char);
+
+int usb_serial_handle_break(struct usb_serial_port *port)
+{
+ if (!port->sysrq) {
+ port->sysrq = jiffies + HZ*5;
+ return 1;
}
+ port->sysrq = 0;
+ return 0;
}
+EXPORT_SYMBOL_GPL(usb_serial_handle_break);
-void usb_serial_generic_shutdown(struct usb_serial *serial)
+void usb_serial_generic_disconnect(struct usb_serial *serial)
{
int i;
@@ -423,3 +563,7 @@ void usb_serial_generic_shutdown(struct usb_serial *serial)
generic_cleanup(serial->port[i]);
}
+void usb_serial_generic_release(struct usb_serial *serial)
+{
+ dbg("%s", __func__);
+}
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 53ef5996e33..0191693625d 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -224,7 +224,8 @@ static int edge_tiocmget(struct tty_struct *tty, struct file *file);
static int edge_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static int edge_startup(struct usb_serial *serial);
-static void edge_shutdown(struct usb_serial *serial);
+static void edge_disconnect(struct usb_serial *serial);
+static void edge_release(struct usb_serial *serial);
#include "io_tables.h" /* all of the devices that this driver supports */
@@ -3193,21 +3194,16 @@ static int edge_startup(struct usb_serial *serial)
/****************************************************************************
- * edge_shutdown
+ * edge_disconnect
* This function is called whenever the device is removed from the usb bus.
****************************************************************************/
-static void edge_shutdown(struct usb_serial *serial)
+static void edge_disconnect(struct usb_serial *serial)
{
struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
- int i;
dbg("%s", __func__);
/* stop reads and writes on all ports */
- for (i = 0; i < serial->num_ports; ++i) {
- kfree(usb_get_serial_port_data(serial->port[i]));
- usb_set_serial_port_data(serial->port[i], NULL);
- }
/* free up our endpoint stuff */
if (edge_serial->is_epic) {
usb_kill_urb(edge_serial->interrupt_read_urb);
@@ -3218,9 +3214,24 @@ static void edge_shutdown(struct usb_serial *serial)
usb_free_urb(edge_serial->read_urb);
kfree(edge_serial->bulk_in_buffer);
}
+}
+
+
+/****************************************************************************
+ * edge_release
+ * This function is called when the device structure is deallocated.
+ ****************************************************************************/
+static void edge_release(struct usb_serial *serial)
+{
+ struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+ int i;
+
+ dbg("%s", __func__);
+
+ for (i = 0; i < serial->num_ports; ++i)
+ kfree(usb_get_serial_port_data(serial->port[i]));
kfree(edge_serial);
- usb_set_serial_data(serial, NULL);
}
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index 7eb9d67b81b..9241d314751 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -117,7 +117,8 @@ static struct usb_serial_driver edgeport_2port_device = {
.throttle = edge_throttle,
.unthrottle = edge_unthrottle,
.attach = edge_startup,
- .shutdown = edge_shutdown,
+ .disconnect = edge_disconnect,
+ .release = edge_release,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
@@ -145,7 +146,8 @@ static struct usb_serial_driver edgeport_4port_device = {
.throttle = edge_throttle,
.unthrottle = edge_unthrottle,
.attach = edge_startup,
- .shutdown = edge_shutdown,
+ .disconnect = edge_disconnect,
+ .release = edge_release,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
@@ -173,7 +175,8 @@ static struct usb_serial_driver edgeport_8port_device = {
.throttle = edge_throttle,
.unthrottle = edge_unthrottle,
.attach = edge_startup,
- .shutdown = edge_shutdown,
+ .disconnect = edge_disconnect,
+ .release = edge_release,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
@@ -200,7 +203,8 @@ static struct usb_serial_driver epic_device = {
.throttle = edge_throttle,
.unthrottle = edge_unthrottle,
.attach = edge_startup,
- .shutdown = edge_shutdown,
+ .disconnect = edge_disconnect,
+ .release = edge_release,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index db964db42d3..e8bc42f92e7 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2663,7 +2663,7 @@ cleanup:
return -ENOMEM;
}
-static void edge_shutdown(struct usb_serial *serial)
+static void edge_disconnect(struct usb_serial *serial)
{
int i;
struct edgeport_port *edge_port;
@@ -2673,12 +2673,22 @@ static void edge_shutdown(struct usb_serial *serial)
for (i = 0; i < serial->num_ports; ++i) {
edge_port = usb_get_serial_port_data(serial->port[i]);
edge_remove_sysfs_attrs(edge_port->port);
+ }
+}
+
+static void edge_release(struct usb_serial *serial)
+{
+ int i;
+ struct edgeport_port *edge_port;
+
+ dbg("%s", __func__);
+
+ for (i = 0; i < serial->num_ports; ++i) {
+ edge_port = usb_get_serial_port_data(serial->port[i]);
edge_buf_free(edge_port->ep_out_buf);
kfree(edge_port);
- usb_set_serial_port_data(serial->port[i], NULL);
}
kfree(usb_get_serial_data(serial));
- usb_set_serial_data(serial, NULL);
}
@@ -2915,7 +2925,8 @@ static struct usb_serial_driver edgeport_1port_device = {
.throttle = edge_throttle,
.unthrottle = edge_unthrottle,
.attach = edge_startup,
- .shutdown = edge_shutdown,
+ .disconnect = edge_disconnect,
+ .release = edge_release,
.port_probe = edge_create_sysfs_attrs,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
@@ -2944,7 +2955,8 @@ static struct usb_serial_driver edgeport_2port_device = {
.throttle = edge_throttle,
.unthrottle = edge_unthrottle,
.attach = edge_startup,
- .shutdown = edge_shutdown,
+ .disconnect = edge_disconnect,
+ .release = edge_release,
.port_probe = edge_create_sysfs_attrs,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index c610a99fa47..2545d45ce16 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -79,7 +79,6 @@ static int ipaq_open(struct tty_struct *tty,
static void ipaq_close(struct usb_serial_port *port);
static int ipaq_calc_num_ports(struct usb_serial *serial);
static int ipaq_startup(struct usb_serial *serial);
-static void ipaq_shutdown(struct usb_serial *serial);
static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int ipaq_write_bulk(struct usb_serial_port *port,
@@ -576,7 +575,6 @@ static struct usb_serial_driver ipaq_device = {
.close = ipaq_close,
.attach = ipaq_startup,
.calc_num_ports = ipaq_calc_num_ports,
- .shutdown = ipaq_shutdown,
.write = ipaq_write,
.write_room = ipaq_write_room,
.chars_in_buffer = ipaq_chars_in_buffer,
@@ -990,11 +988,6 @@ static int ipaq_startup(struct usb_serial *serial)
return usb_reset_configuration(serial->dev);
}
-static void ipaq_shutdown(struct usb_serial *serial)
-{
- dbg("%s", __func__);
-}
-
static int __init ipaq_init(void)
{
int retval;
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 76a3cc327bb..96873a7a32b 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -121,8 +121,8 @@ static int iuu_startup(struct usb_serial *serial)
return 0;
}
-/* Shutdown function */
-static void iuu_shutdown(struct usb_serial *serial)
+/* Release function */
+static void iuu_release(struct usb_serial *serial)
{
struct usb_serial_port *port = serial->port[0];
struct iuu_private *priv = usb_get_serial_port_data(port);
@@ -1202,7 +1202,7 @@ static struct usb_serial_driver iuu_device = {
.tiocmset = iuu_tiocmset,
.set_termios = iuu_set_termios,
.attach = iuu_startup,
- .shutdown = iuu_shutdown,
+ .release = iuu_release,
};
static int __init iuu_init(void)
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index f1195a98f31..2594b8743d3 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -2689,7 +2689,7 @@ static int keyspan_startup(struct usb_serial *serial)
return 0;
}
-static void keyspan_shutdown(struct usb_serial *serial)
+static void keyspan_disconnect(struct usb_serial *serial)
{
int i, j;
struct usb_serial_port *port;
@@ -2729,6 +2729,17 @@ static void keyspan_shutdown(struct usb_serial *serial)
usb_free_urb(p_priv->out_urbs[j]);
}
}
+}
+
+static void keyspan_release(struct usb_serial *serial)
+{
+ int i;
+ struct usb_serial_port *port;
+ struct keyspan_serial_private *s_priv;
+
+ dbg("%s", __func__);
+
+ s_priv = usb_get_serial_data(serial);
/* dbg("Freeing serial->private."); */
kfree(s_priv);
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 0d4569b6076..3107ed15af6 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -41,7 +41,8 @@ static int keyspan_open (struct tty_struct *tty,
static void keyspan_close (struct usb_serial_port *port);
static void keyspan_dtr_rts (struct usb_serial_port *port, int on);
static int keyspan_startup (struct usb_serial *serial);
-static void keyspan_shutdown (struct usb_serial *serial);
+static void keyspan_disconnect (struct usb_serial *serial);
+static void keyspan_release (struct usb_serial *serial);
static int keyspan_write_room (struct tty_struct *tty);
static int keyspan_write (struct tty_struct *tty,
@@ -569,7 +570,8 @@ static struct usb_serial_driver keyspan_1port_device = {
.tiocmget = keyspan_tiocmget,
.tiocmset = keyspan_tiocmset,
.attach = keyspan_startup,
- .shutdown = keyspan_shutdown,
+ .disconnect = keyspan_disconnect,
+ .release = keyspan_release,
};
static struct usb_serial_driver keyspan_2port_device = {
@@ -590,7 +592,8 @@ static struct usb_serial_driver keyspan_2port_device = {
.tiocmget = keyspan_tiocmget,
.tiocmset = keyspan_tiocmset,
.attach = keyspan_startup,
- .shutdown = keyspan_shutdown,
+ .disconnect = keyspan_disconnect,
+ .release = keyspan_release,
};
static struct usb_serial_driver keyspan_4port_device = {
@@ -611,7 +614,8 @@ static struct usb_serial_driver keyspan_4port_device = {
.tiocmget = keyspan_tiocmget,
.tiocmset = keyspan_tiocmset,
.attach = keyspan_startup,
- .shutdown = keyspan_shutdown,
+ .disconnect = keyspan_disconnect,
+ .release = keyspan_release,
};
#endif
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index ab769dbea1b..d0b12e40c2b 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -809,7 +809,7 @@ static int keyspan_pda_startup(struct usb_serial *serial)
return 0;
}
-static void keyspan_pda_shutdown(struct usb_serial *serial)
+static void keyspan_pda_release(struct usb_serial *serial)
{
dbg("%s", __func__);
@@ -869,7 +869,7 @@ static struct usb_serial_driver keyspan_pda_device = {
.tiocmget = keyspan_pda_tiocmget,
.tiocmset = keyspan_pda_tiocmset,
.attach = keyspan_pda_startup,
- .shutdown = keyspan_pda_shutdown,
+ .release = keyspan_pda_release,
};
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index fa817c66b3e..0f44bb8e8d4 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -73,7 +73,8 @@ static int debug;
* Function prototypes
*/
static int klsi_105_startup(struct usb_serial *serial);
-static void klsi_105_shutdown(struct usb_serial *serial);
+static void klsi_105_disconnect(struct usb_serial *serial);
+static void klsi_105_release(struct usb_serial *serial);
static int klsi_105_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
static void klsi_105_close(struct usb_serial_port *port);
@@ -131,7 +132,8 @@ static struct usb_serial_driver kl5kusb105d_device = {
.tiocmget = klsi_105_tiocmget,
.tiocmset = klsi_105_tiocmset,
.attach = klsi_105_startup,
- .shutdown = klsi_105_shutdown,
+ .disconnect = klsi_105_disconnect,
+ .release = klsi_105_release,
.throttle = klsi_105_throttle,
.unthrottle = klsi_105_unthrottle,
};
@@ -315,7 +317,7 @@ err_cleanup:
} /* klsi_105_startup */
-static void klsi_105_shutdown(struct usb_serial *serial)
+static void klsi_105_disconnect(struct usb_serial *serial)
{
int i;
@@ -325,33 +327,36 @@ static void klsi_105_shutdown(struct usb_serial *serial)
for (i = 0; i < serial->num_ports; ++i) {
struct klsi_105_private *priv =
usb_get_serial_port_data(serial->port[i]);
- unsigned long flags;
if (priv) {
/* kill our write urb pool */
int j;
struct urb **write_urbs = priv->write_urb_pool;
- spin_lock_irqsave(&priv->lock, flags);
for (j = 0; j < NUM_URBS; j++) {
if (write_urbs[j]) {
- /* FIXME - uncomment the following
- * usb_kill_urb call when the host
- * controllers get fixed to set
- * urb->dev = NULL after the urb is
- * finished. Otherwise this call
- * oopses. */
- /* usb_kill_urb(write_urbs[j]); */
- kfree(write_urbs[j]->transfer_buffer);
+ usb_kill_urb(write_urbs[j]);
usb_free_urb(write_urbs[j]);
}
}
- spin_unlock_irqrestore(&priv->lock, flags);
- kfree(priv);
- usb_set_serial_port_data(serial->port[i], NULL);
}
}
-} /* klsi_105_shutdown */
+} /* klsi_105_disconnect */
+
+
+static void klsi_105_release(struct usb_serial *serial)
+{
+ int i;
+
+ dbg("%s", __func__);
+
+ for (i = 0; i < serial->num_ports; ++i) {
+ struct klsi_105_private *priv =
+ usb_get_serial_port_data(serial->port[i]);
+
+ kfree(priv);
+ }
+} /* klsi_105_release */
static int klsi_105_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp)
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 6b570498287..6db0e561f68 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -69,7 +69,7 @@ static int debug;
/* Function prototypes */
static int kobil_startup(struct usb_serial *serial);
-static void kobil_shutdown(struct usb_serial *serial);
+static void kobil_release(struct usb_serial *serial);
static int kobil_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
static void kobil_close(struct usb_serial_port *port);
@@ -117,7 +117,7 @@ static struct usb_serial_driver kobil_device = {
.id_table = id_table,
.num_ports = 1,
.attach = kobil_startup,
- .shutdown = kobil_shutdown,
+ .release = kobil_release,
.ioctl = kobil_ioctl,
.set_termios = kobil_set_termios,
.tiocmget = kobil_tiocmget,
@@ -201,17 +201,13 @@ static int kobil_startup(struct usb_serial *serial)
}
-static void kobil_shutdown(struct usb_serial *serial)
+static void kobil_release(struct usb_serial *serial)
{
int i;
dbg("%s - port %d", __func__, serial->port[0]->number);
- for (i = 0; i < serial->num_ports; ++i) {
- while (serial->port[i]->port.count > 0)
- kobil_close(serial->port[i]);
+ for (i = 0; i < serial->num_ports; ++i)
kfree(usb_get_serial_port_data(serial->port[i]));
- usb_set_serial_port_data(serial->port[i], NULL);
- }
}
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 873795548fc..d8825e159aa 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -92,7 +92,7 @@ static int debug;
* Function prototypes
*/
static int mct_u232_startup(struct usb_serial *serial);
-static void mct_u232_shutdown(struct usb_serial *serial);
+static void mct_u232_release(struct usb_serial *serial);
static int mct_u232_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
static void mct_u232_close(struct usb_serial_port *port);
@@ -149,7 +149,7 @@ static struct usb_serial_driver mct_u232_device = {
.tiocmget = mct_u232_tiocmget,
.tiocmset = mct_u232_tiocmset,
.attach = mct_u232_startup,
- .shutdown = mct_u232_shutdown,
+ .release = mct_u232_release,
};
@@ -407,7 +407,7 @@ static int mct_u232_startup(struct usb_serial *serial)
} /* mct_u232_startup */
-static void mct_u232_shutdown(struct usb_serial *serial)
+static void mct_u232_release(struct usb_serial *serial)
{
struct mct_u232_private *priv;
int i;
@@ -417,12 +417,9 @@ static void mct_u232_shutdown(struct usb_serial *serial)
for (i = 0; i < serial->num_ports; ++i) {
/* My special items, the standard routines free my urbs */
priv = usb_get_serial_port_data(serial->port[i]);
- if (priv) {
- usb_set_serial_port_data(serial->port[i], NULL);
- kfree(priv);
- }
+ kfree(priv);
}
-} /* mct_u232_shutdown */
+} /* mct_u232_release */
static int mct_u232_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp)
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 9e1a013ee7f..bfc5ce000ef 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1521,19 +1521,16 @@ static int mos7720_startup(struct usb_serial *serial)
return 0;
}
-static void mos7720_shutdown(struct usb_serial *serial)
+static void mos7720_release(struct usb_serial *serial)
{
int i;
/* free private structure allocated for serial port */
- for (i = 0; i < serial->num_ports; ++i) {
+ for (i = 0; i < serial->num_ports; ++i)
kfree(usb_get_serial_port_data(serial->port[i]));
- usb_set_serial_port_data(serial->port[i], NULL);
- }
/* free private structure allocated for serial device */
kfree(usb_get_serial_data(serial));
- usb_set_serial_data(serial, NULL);
}
static struct usb_driver usb_driver = {
@@ -1558,7 +1555,7 @@ static struct usb_serial_driver moschip7720_2port_driver = {
.throttle = mos7720_throttle,
.unthrottle = mos7720_unthrottle,
.attach = mos7720_startup,
- .shutdown = mos7720_shutdown,
+ .release = mos7720_release,
.ioctl = mos7720_ioctl,
.set_termios = mos7720_set_termios,
.write = mos7720_write,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 10b78a37214..c40f95c1951 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -238,7 +238,7 @@ static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg,
{
struct usb_device *dev = port->serial->dev;
val = val & 0x00ff;
- dbg("mos7840_set_reg_sync offset is %x, value %x\n", reg, val);
+ dbg("mos7840_set_reg_sync offset is %x, value %x", reg, val);
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
MCS_WR_RTYPE, val, reg, NULL, 0,
@@ -260,7 +260,7 @@ static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg,
ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
MCS_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH,
MOS_WDR_TIMEOUT);
- dbg("mos7840_get_reg_sync offset is %x, return val %x\n", reg, *val);
+ dbg("mos7840_get_reg_sync offset is %x, return val %x", reg, *val);
*val = (*val) & 0x00ff;
return ret;
}
@@ -282,18 +282,18 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
if (port->serial->num_ports == 4) {
val |= (((__u16) port->number -
(__u16) (port->serial->minor)) + 1) << 8;
- dbg("mos7840_set_uart_reg application number is %x\n", val);
+ dbg("mos7840_set_uart_reg application number is %x", val);
} else {
if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
val |= (((__u16) port->number -
(__u16) (port->serial->minor)) + 1) << 8;
- dbg("mos7840_set_uart_reg application number is %x\n",
+ dbg("mos7840_set_uart_reg application number is %x",
val);
} else {
val |=
(((__u16) port->number -
(__u16) (port->serial->minor)) + 2) << 8;
- dbg("mos7840_set_uart_reg application number is %x\n",
+ dbg("mos7840_set_uart_reg application number is %x",
val);
}
}
@@ -315,24 +315,24 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
int ret = 0;
__u16 Wval;
- /* dbg("application number is %4x \n",
+ /* dbg("application number is %4x",
(((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */
/* Wval is same as application number */
if (port->serial->num_ports == 4) {
Wval =
(((__u16) port->number - (__u16) (port->serial->minor)) +
1) << 8;
- dbg("mos7840_get_uart_reg application number is %x\n", Wval);
+ dbg("mos7840_get_uart_reg application number is %x", Wval);
} else {
if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
Wval = (((__u16) port->number -
(__u16) (port->serial->minor)) + 1) << 8;
- dbg("mos7840_get_uart_reg application number is %x\n",
+ dbg("mos7840_get_uart_reg application number is %x",
Wval);
} else {
Wval = (((__u16) port->number -
(__u16) (port->serial->minor)) + 2) << 8;
- dbg("mos7840_get_uart_reg application number is %x\n",
+ dbg("mos7840_get_uart_reg application number is %x",
Wval);
}
}
@@ -346,11 +346,11 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
static void mos7840_dump_serial_port(struct moschip_port *mos7840_port)
{
- dbg("***************************************\n");
- dbg("SpRegOffset is %2x\n", mos7840_port->SpRegOffset);
- dbg("ControlRegOffset is %2x \n", mos7840_port->ControlRegOffset);
- dbg("DCRRegOffset is %2x \n", mos7840_port->DcrRegOffset);
- dbg("***************************************\n");
+ dbg("***************************************");
+ dbg("SpRegOffset is %2x", mos7840_port->SpRegOffset);
+ dbg("ControlRegOffset is %2x", mos7840_port->ControlRegOffset);
+ dbg("DCRRegOffset is %2x", mos7840_port->DcrRegOffset);
+ dbg("***************************************");
}
@@ -474,12 +474,12 @@ static void mos7840_control_callback(struct urb *urb)
goto exit;
}
- dbg("%s urb buffer size is %d\n", __func__, urb->actual_length);
- dbg("%s mos7840_port->MsrLsr is %d port %d\n", __func__,
+ dbg("%s urb buffer size is %d", __func__, urb->actual_length);
+ dbg("%s mos7840_port->MsrLsr is %d port %d", __func__,
mos7840_port->MsrLsr, mos7840_port->port_num);
data = urb->transfer_buffer;
regval = (__u8) data[0];
- dbg("%s data is %x\n", __func__, regval);
+ dbg("%s data is %x", __func__, regval);
if (mos7840_port->MsrLsr == 0)
mos7840_handle_new_msr(mos7840_port, regval);
else if (mos7840_port->MsrLsr == 1)
@@ -538,7 +538,7 @@ static void mos7840_interrupt_callback(struct urb *urb)
__u16 wval, wreg = 0;
int status = urb->status;
- dbg("%s", " : Entering\n");
+ dbg("%s", " : Entering");
switch (status) {
case 0:
@@ -570,7 +570,7 @@ static void mos7840_interrupt_callback(struct urb *urb)
* Byte 5 FIFO status for both */
if (length && length > 5) {
- dbg("%s \n", "Wrong data !!!");
+ dbg("%s", "Wrong data !!!");
return;
}
@@ -587,17 +587,17 @@ static void mos7840_interrupt_callback(struct urb *urb)
(__u16) (serial->minor)) + 1) << 8;
if (mos7840_port->open) {
if (sp[i] & 0x01) {
- dbg("SP%d No Interrupt !!!\n", i);
+ dbg("SP%d No Interrupt !!!", i);
} else {
switch (sp[i] & 0x0f) {
case SERIAL_IIR_RLS:
dbg("Serial Port %d: Receiver status error or ", i);
- dbg("address bit detected in 9-bit mode\n");
+ dbg("address bit detected in 9-bit mode");
mos7840_port->MsrLsr = 1;
wreg = LINE_STATUS_REGISTER;
break;
case SERIAL_IIR_MS:
- dbg("Serial Port %d: Modem status change\n", i);
+ dbg("Serial Port %d: Modem status change", i);
mos7840_port->MsrLsr = 0;
wreg = MODEM_STATUS_REGISTER;
break;
@@ -689,7 +689,7 @@ static void mos7840_bulk_in_callback(struct urb *urb)
mos7840_port = urb->context;
if (!mos7840_port) {
- dbg("%s", "NULL mos7840_port pointer \n");
+ dbg("%s", "NULL mos7840_port pointer");
mos7840_port->read_urb_busy = false;
return;
}
@@ -702,41 +702,41 @@ static void mos7840_bulk_in_callback(struct urb *urb)
port = (struct usb_serial_port *)mos7840_port->port;
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Port Paranoia failed \n");
+ dbg("%s", "Port Paranoia failed");
mos7840_port->read_urb_busy = false;
return;
}
serial = mos7840_get_usb_serial(port, __func__);
if (!serial) {
- dbg("%s\n", "Bad serial pointer ");
+ dbg("%s", "Bad serial pointer");
mos7840_port->read_urb_busy = false;
return;
}
- dbg("%s\n", "Entering... \n");
+ dbg("%s", "Entering... ");
data = urb->transfer_buffer;
- dbg("%s", "Entering ........... \n");
+ dbg("%s", "Entering ...........");
if (urb->actual_length) {
tty = tty_port_tty_get(&mos7840_port->port->port);
if (tty) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
- dbg(" %s \n", data);
+ dbg(" %s ", data);
tty_flip_buffer_push(tty);
tty_kref_put(tty);
}
mos7840_port->icount.rx += urb->actual_length;
smp_wmb();
- dbg("mos7840_port->icount.rx is %d:\n",
+ dbg("mos7840_port->icount.rx is %d:",
mos7840_port->icount.rx);
}
if (!mos7840_port->read_urb) {
- dbg("%s", "URB KILLED !!!\n");
+ dbg("%s", "URB KILLED !!!");
mos7840_port->read_urb_busy = false;
return;
}
@@ -777,16 +777,16 @@ static void mos7840_bulk_out_data_callback(struct urb *urb)
spin_unlock(&mos7840_port->pool_lock);
if (status) {
- dbg("nonzero write bulk status received:%d\n", status);
+ dbg("nonzero write bulk status received:%d", status);
return;
}
if (mos7840_port_paranoia_check(mos7840_port->port, __func__)) {
- dbg("%s", "Port Paranoia failed \n");
+ dbg("%s", "Port Paranoia failed");
return;
}
- dbg("%s \n", "Entering .........");
+ dbg("%s", "Entering .........");
tty = tty_port_tty_get(&mos7840_port->port->port);
if (tty && mos7840_port->open)
@@ -830,15 +830,17 @@ static int mos7840_open(struct tty_struct *tty,
struct moschip_port *mos7840_port;
struct moschip_port *port0;
+ dbg ("%s enter", __func__);
+
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Port Paranoia failed \n");
+ dbg("%s", "Port Paranoia failed");
return -ENODEV;
}
serial = port->serial;
if (mos7840_serial_paranoia_check(serial, __func__)) {
- dbg("%s", "Serial Paranoia failed \n");
+ dbg("%s", "Serial Paranoia failed");
return -ENODEV;
}
@@ -891,20 +893,20 @@ static int mos7840_open(struct tty_struct *tty,
Data = 0x0;
status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
if (status < 0) {
- dbg("Reading Spreg failed\n");
+ dbg("Reading Spreg failed");
return -1;
}
Data |= 0x80;
status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
if (status < 0) {
- dbg("writing Spreg failed\n");
+ dbg("writing Spreg failed");
return -1;
}
Data &= ~0x80;
status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
if (status < 0) {
- dbg("writing Spreg failed\n");
+ dbg("writing Spreg failed");
return -1;
}
/* End of block to be checked */
@@ -913,7 +915,7 @@ static int mos7840_open(struct tty_struct *tty,
status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset,
&Data);
if (status < 0) {
- dbg("Reading Controlreg failed\n");
+ dbg("Reading Controlreg failed");
return -1;
}
Data |= 0x08; /* Driver done bit */
@@ -921,7 +923,7 @@ static int mos7840_open(struct tty_struct *tty,
status = mos7840_set_reg_sync(port,
mos7840_port->ControlRegOffset, Data);
if (status < 0) {
- dbg("writing Controlreg failed\n");
+ dbg("writing Controlreg failed");
return -1;
}
/* do register settings here */
@@ -932,21 +934,21 @@ static int mos7840_open(struct tty_struct *tty,
Data = 0x00;
status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
if (status < 0) {
- dbg("disableing interrupts failed\n");
+ dbg("disabling interrupts failed");
return -1;
}
/* Set FIFO_CONTROL_REGISTER to the default value */
Data = 0x00;
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
if (status < 0) {
- dbg("Writing FIFO_CONTROL_REGISTER failed\n");
+ dbg("Writing FIFO_CONTROL_REGISTER failed");
return -1;
}
Data = 0xcf;
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
if (status < 0) {
- dbg("Writing FIFO_CONTROL_REGISTER failed\n");
+ dbg("Writing FIFO_CONTROL_REGISTER failed");
return -1;
}
@@ -1043,12 +1045,12 @@ static int mos7840_open(struct tty_struct *tty,
* (can't set it up in mos7840_startup as the *
* structures were not set up at that time.) */
- dbg("port number is %d \n", port->number);
- dbg("serial number is %d \n", port->serial->minor);
- dbg("Bulkin endpoint is %d \n", port->bulk_in_endpointAddress);
- dbg("BulkOut endpoint is %d \n", port->bulk_out_endpointAddress);
- dbg("Interrupt endpoint is %d \n", port->interrupt_in_endpointAddress);
- dbg("port's number in the device is %d\n", mos7840_port->port_num);
+ dbg("port number is %d", port->number);
+ dbg("serial number is %d", port->serial->minor);
+ dbg("Bulkin endpoint is %d", port->bulk_in_endpointAddress);
+ dbg("BulkOut endpoint is %d", port->bulk_out_endpointAddress);
+ dbg("Interrupt endpoint is %d", port->interrupt_in_endpointAddress);
+ dbg("port's number in the device is %d", mos7840_port->port_num);
mos7840_port->read_urb = port->read_urb;
/* set up our bulk in urb */
@@ -1061,7 +1063,7 @@ static int mos7840_open(struct tty_struct *tty,
mos7840_port->read_urb->transfer_buffer_length,
mos7840_bulk_in_callback, mos7840_port);
- dbg("mos7840_open: bulkin endpoint is %d\n",
+ dbg("mos7840_open: bulkin endpoint is %d",
port->bulk_in_endpointAddress);
mos7840_port->read_urb_busy = true;
response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
@@ -1087,9 +1089,11 @@ static int mos7840_open(struct tty_struct *tty,
mos7840_port->icount.tx = 0;
mos7840_port->icount.rx = 0;
- dbg("\n\nusb_serial serial:%p mos7840_port:%p\n usb_serial_port port:%p\n\n",
+ dbg("usb_serial serial:%p mos7840_port:%p\n usb_serial_port port:%p",
serial, mos7840_port, port);
+ dbg ("%s leave", __func__);
+
return 0;
}
@@ -1112,16 +1116,16 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty)
unsigned long flags;
struct moschip_port *mos7840_port;
- dbg("%s \n", " mos7840_chars_in_buffer:entering ...........");
+ dbg("%s", " mos7840_chars_in_buffer:entering ...........");
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
+ dbg("%s", "Invalid port");
return 0;
}
mos7840_port = mos7840_get_port_private(port);
if (mos7840_port == NULL) {
- dbg("%s \n", "mos7840_break:leaving ...........");
+ dbg("%s", "mos7840_break:leaving ...........");
return 0;
}
@@ -1148,16 +1152,16 @@ static void mos7840_close(struct usb_serial_port *port)
int j;
__u16 Data;
- dbg("%s\n", "mos7840_close:entering...");
+ dbg("%s", "mos7840_close:entering...");
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Port Paranoia failed \n");
+ dbg("%s", "Port Paranoia failed");
return;
}
serial = mos7840_get_usb_serial(port, __func__);
if (!serial) {
- dbg("%s", "Serial Paranoia failed \n");
+ dbg("%s", "Serial Paranoia failed");
return;
}
@@ -1185,27 +1189,27 @@ static void mos7840_close(struct usb_serial_port *port)
* and interrupt read if they exists */
if (serial->dev) {
if (mos7840_port->write_urb) {
- dbg("%s", "Shutdown bulk write\n");
+ dbg("%s", "Shutdown bulk write");
usb_kill_urb(mos7840_port->write_urb);
}
if (mos7840_port->read_urb) {
- dbg("%s", "Shutdown bulk read\n");
+ dbg("%s", "Shutdown bulk read");
usb_kill_urb(mos7840_port->read_urb);
mos7840_port->read_urb_busy = false;
}
if ((&mos7840_port->control_urb)) {
- dbg("%s", "Shutdown control read\n");
+ dbg("%s", "Shutdown control read");
/*/ usb_kill_urb (mos7840_port->control_urb); */
}
}
/* if(mos7840_port->ctrl_buf != NULL) */
/* kfree(mos7840_port->ctrl_buf); */
port0->open_ports--;
- dbg("mos7840_num_open_ports in close%d:in port%d\n",
+ dbg("mos7840_num_open_ports in close%d:in port%d",
port0->open_ports, port->number);
if (port0->open_ports == 0) {
if (serial->port[0]->interrupt_in_urb) {
- dbg("%s", "Shutdown interrupt_in_urb\n");
+ dbg("%s", "Shutdown interrupt_in_urb");
usb_kill_urb(serial->port[0]->interrupt_in_urb);
}
}
@@ -1225,7 +1229,7 @@ static void mos7840_close(struct usb_serial_port *port)
mos7840_port->open = 0;
- dbg("%s \n", "Leaving ............");
+ dbg("%s", "Leaving ............");
}
/************************************************************************
@@ -1280,17 +1284,17 @@ static void mos7840_break(struct tty_struct *tty, int break_state)
struct usb_serial *serial;
struct moschip_port *mos7840_port;
- dbg("%s \n", "Entering ...........");
- dbg("mos7840_break: Start\n");
+ dbg("%s", "Entering ...........");
+ dbg("mos7840_break: Start");
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Port Paranoia failed \n");
+ dbg("%s", "Port Paranoia failed");
return;
}
serial = mos7840_get_usb_serial(port, __func__);
if (!serial) {
- dbg("%s", "Serial Paranoia failed \n");
+ dbg("%s", "Serial Paranoia failed");
return;
}
@@ -1310,7 +1314,7 @@ static void mos7840_break(struct tty_struct *tty, int break_state)
/* FIXME: no locking on shadowLCR anywhere in driver */
mos7840_port->shadowLCR = data;
- dbg("mcs7840_break mos7840_port->shadowLCR is %x\n",
+ dbg("mcs7840_break mos7840_port->shadowLCR is %x",
mos7840_port->shadowLCR);
mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER,
mos7840_port->shadowLCR);
@@ -1334,17 +1338,17 @@ static int mos7840_write_room(struct tty_struct *tty)
unsigned long flags;
struct moschip_port *mos7840_port;
- dbg("%s \n", " mos7840_write_room:entering ...........");
+ dbg("%s", " mos7840_write_room:entering ...........");
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
- dbg("%s \n", " mos7840_write_room:leaving ...........");
+ dbg("%s", "Invalid port");
+ dbg("%s", " mos7840_write_room:leaving ...........");
return -1;
}
mos7840_port = mos7840_get_port_private(port);
if (mos7840_port == NULL) {
- dbg("%s \n", "mos7840_break:leaving ...........");
+ dbg("%s", "mos7840_break:leaving ...........");
return -1;
}
@@ -1384,16 +1388,16 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
/* __u16 Data; */
const unsigned char *current_position = data;
unsigned char *data1;
- dbg("%s \n", "entering ...........");
- /* dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
+ dbg("%s", "entering ...........");
+ /* dbg("mos7840_write: mos7840_port->shadowLCR is %x",
mos7840_port->shadowLCR); */
#ifdef NOTMOS7840
Data = 0x00;
status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
mos7840_port->shadowLCR = Data;
- dbg("mos7840_write: LINE_CONTROL_REGISTER is %x\n", Data);
- dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
+ dbg("mos7840_write: LINE_CONTROL_REGISTER is %x", Data);
+ dbg("mos7840_write: mos7840_port->shadowLCR is %x",
mos7840_port->shadowLCR);
/* Data = 0x03; */
@@ -1407,32 +1411,32 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
/* status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); */
Data = 0x00;
status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data);
- dbg("mos7840_write:DLL value is %x\n", Data);
+ dbg("mos7840_write:DLL value is %x", Data);
Data = 0x0;
status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data);
- dbg("mos7840_write:DLM value is %x\n", Data);
+ dbg("mos7840_write:DLM value is %x", Data);
Data = Data & ~SERIAL_LCR_DLAB;
- dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
+ dbg("mos7840_write: mos7840_port->shadowLCR is %x",
mos7840_port->shadowLCR);
status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
#endif
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Port Paranoia failed \n");
+ dbg("%s", "Port Paranoia failed");
return -1;
}
serial = port->serial;
if (mos7840_serial_paranoia_check(serial, __func__)) {
- dbg("%s", "Serial Paranoia failed \n");
+ dbg("%s", "Serial Paranoia failed");
return -1;
}
mos7840_port = mos7840_get_port_private(port);
if (mos7840_port == NULL) {
- dbg("%s", "mos7840_port is NULL\n");
+ dbg("%s", "mos7840_port is NULL");
return -1;
}
@@ -1444,7 +1448,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
if (!mos7840_port->busy[i]) {
mos7840_port->busy[i] = 1;
urb = mos7840_port->write_urb_pool[i];
- dbg("\nURB:%d", i);
+ dbg("URB:%d", i);
break;
}
}
@@ -1479,7 +1483,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
mos7840_bulk_out_data_callback, mos7840_port);
data1 = urb->transfer_buffer;
- dbg("\nbulkout endpoint is %d", port->bulk_out_endpointAddress);
+ dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);
/* send it down the pipe */
status = usb_submit_urb(urb, GFP_ATOMIC);
@@ -1494,7 +1498,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
bytes_sent = transfer_size;
mos7840_port->icount.tx += transfer_size;
smp_wmb();
- dbg("mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx);
+ dbg("mos7840_port->icount.tx is %d:", mos7840_port->icount.tx);
exit:
return bytes_sent;
@@ -1513,11 +1517,11 @@ static void mos7840_throttle(struct tty_struct *tty)
int status;
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
+ dbg("%s", "Invalid port");
return;
}
- dbg("- port %d\n", port->number);
+ dbg("- port %d", port->number);
mos7840_port = mos7840_get_port_private(port);
@@ -1525,11 +1529,11 @@ static void mos7840_throttle(struct tty_struct *tty)
return;
if (!mos7840_port->open) {
- dbg("%s\n", "port not opened");
+ dbg("%s", "port not opened");
return;
}
- dbg("%s", "Entering .......... \n");
+ dbg("%s", "Entering ..........");
/* if we are implementing XON/XOFF, send the stop character */
if (I_IXOFF(tty)) {
@@ -1563,7 +1567,7 @@ static void mos7840_unthrottle(struct tty_struct *tty)
struct moschip_port *mos7840_port = mos7840_get_port_private(port);
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
+ dbg("%s", "Invalid port");
return;
}
@@ -1575,7 +1579,7 @@ static void mos7840_unthrottle(struct tty_struct *tty)
return;
}
- dbg("%s", "Entering .......... \n");
+ dbg("%s", "Entering ..........");
/* if we are implementing XON/XOFF, send the start character */
if (I_IXOFF(tty)) {
@@ -1660,7 +1664,7 @@ static int mos7840_tiocmset(struct tty_struct *tty, struct file *file,
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
if (status < 0) {
- dbg("setting MODEM_CONTROL_REGISTER Failed\n");
+ dbg("setting MODEM_CONTROL_REGISTER Failed");
return status;
}
@@ -1729,11 +1733,11 @@ static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor,
custom++;
*divisor = custom;
- dbg(" Baud %d = %d\n", baudrate, custom);
+ dbg(" Baud %d = %d", baudrate, custom);
return 0;
}
- dbg("%s\n", " Baud calculation Failed...");
+ dbg("%s", " Baud calculation Failed...");
return -1;
#endif
}
@@ -1759,16 +1763,16 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
port = (struct usb_serial_port *)mos7840_port->port;
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
+ dbg("%s", "Invalid port");
return -1;
}
if (mos7840_serial_paranoia_check(port->serial, __func__)) {
- dbg("%s", "Invalid Serial \n");
+ dbg("%s", "Invalid Serial");
return -1;
}
- dbg("%s", "Entering .......... \n");
+ dbg("%s", "Entering ..........");
number = mos7840_port->port->number - mos7840_port->port->serial->minor;
@@ -1784,7 +1788,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
Data);
if (status < 0) {
- dbg("Writing spreg failed in set_serial_baud\n");
+ dbg("Writing spreg failed in set_serial_baud");
return -1;
}
#endif
@@ -1797,7 +1801,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
Data);
if (status < 0) {
- dbg("Writing spreg failed in set_serial_baud\n");
+ dbg("Writing spreg failed in set_serial_baud");
return -1;
}
#endif
@@ -1812,14 +1816,14 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset,
&Data);
if (status < 0) {
- dbg("reading spreg failed in set_serial_baud\n");
+ dbg("reading spreg failed in set_serial_baud");
return -1;
}
Data = (Data & 0x8f) | clk_sel_val;
status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset,
Data);
if (status < 0) {
- dbg("Writing spreg failed in set_serial_baud\n");
+ dbg("Writing spreg failed in set_serial_baud");
return -1;
}
/* Calculate the Divisor */
@@ -1835,11 +1839,11 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
/* Write the divisor */
Data = (unsigned char)(divisor & 0xff);
- dbg("set_serial_baud Value to write DLL is %x\n", Data);
+ dbg("set_serial_baud Value to write DLL is %x", Data);
mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
Data = (unsigned char)((divisor & 0xff00) >> 8);
- dbg("set_serial_baud Value to write DLM is %x\n", Data);
+ dbg("set_serial_baud Value to write DLM is %x", Data);
mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
/* Disable access to divisor latch */
@@ -1877,12 +1881,12 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
port = (struct usb_serial_port *)mos7840_port->port;
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
+ dbg("%s", "Invalid port");
return;
}
if (mos7840_serial_paranoia_check(port->serial, __func__)) {
- dbg("%s", "Invalid Serial \n");
+ dbg("%s", "Invalid Serial");
return;
}
@@ -1895,7 +1899,7 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
return;
}
- dbg("%s", "Entering .......... \n");
+ dbg("%s", "Entering ..........");
lData = LCR_BITS_8;
lStop = LCR_STOP_1;
@@ -1955,7 +1959,7 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
mos7840_port->shadowLCR |= (lData | lParity | lStop);
- dbg("mos7840_change_port_settings mos7840_port->shadowLCR is %x\n",
+ dbg("mos7840_change_port_settings mos7840_port->shadowLCR is %x",
mos7840_port->shadowLCR);
/* Disable Interrupts */
Data = 0x00;
@@ -1997,7 +2001,7 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
if (!baud) {
/* pick a default, any default... */
- dbg("%s\n", "Picked default baud...");
+ dbg("%s", "Picked default baud...");
baud = 9600;
}
@@ -2020,7 +2024,7 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
}
wake_up(&mos7840_port->delta_msr_wait);
mos7840_port->delta_msr_cond = 1;
- dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x\n",
+ dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x",
mos7840_port->shadowLCR);
return;
@@ -2040,16 +2044,16 @@ static void mos7840_set_termios(struct tty_struct *tty,
unsigned int cflag;
struct usb_serial *serial;
struct moschip_port *mos7840_port;
- dbg("mos7840_set_termios: START\n");
+ dbg("mos7840_set_termios: START");
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
+ dbg("%s", "Invalid port");
return;
}
serial = port->serial;
if (mos7840_serial_paranoia_check(serial, __func__)) {
- dbg("%s", "Invalid Serial \n");
+ dbg("%s", "Invalid Serial");
return;
}
@@ -2063,7 +2067,7 @@ static void mos7840_set_termios(struct tty_struct *tty,
return;
}
- dbg("%s\n", "setting termios - ");
+ dbg("%s", "setting termios - ");
cflag = tty->termios->c_cflag;
@@ -2078,7 +2082,7 @@ static void mos7840_set_termios(struct tty_struct *tty,
mos7840_change_port_settings(tty, mos7840_port, old_termios);
if (!mos7840_port->read_urb) {
- dbg("%s", "URB KILLED !!!!!\n");
+ dbg("%s", "URB KILLED !!!!!");
return;
}
@@ -2144,7 +2148,7 @@ static int mos7840_set_modem_info(struct moschip_port *mos7840_port,
port = (struct usb_serial_port *)mos7840_port->port;
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
+ dbg("%s", "Invalid port");
return -1;
}
@@ -2189,7 +2193,7 @@ static int mos7840_set_modem_info(struct moschip_port *mos7840_port,
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
unlock_kernel();
if (status < 0) {
- dbg("setting MODEM_CONTROL_REGISTER Failed\n");
+ dbg("setting MODEM_CONTROL_REGISTER Failed");
return -1;
}
@@ -2274,7 +2278,7 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
int mosret = 0;
if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port \n");
+ dbg("%s", "Invalid port");
return -1;
}
@@ -2374,9 +2378,8 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
{
int mos7840_num_ports = 0;
- dbg("numberofendpoints: %d \n",
- (int)serial->interface->cur_altsetting->desc.bNumEndpoints);
- dbg("numberofendpoints: %d \n",
+ dbg("numberofendpoints: cur %d, alt %d",
+ (int)serial->interface->cur_altsetting->desc.bNumEndpoints,
(int)serial->interface->altsetting->desc.bNumEndpoints);
if (serial->interface->cur_altsetting->desc.bNumEndpoints == 5) {
mos7840_num_ports = serial->num_ports = 2;
@@ -2385,7 +2388,7 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
serial->num_bulk_out = 4;
mos7840_num_ports = serial->num_ports = 4;
}
-
+ dbg ("mos7840_num_ports = %d", mos7840_num_ports);
return mos7840_num_ports;
}
@@ -2400,22 +2403,24 @@ static int mos7840_startup(struct usb_serial *serial)
int i, status;
__u16 Data;
- dbg("%s \n", " mos7840_startup :entering..........");
+ dbg("%s", "mos7840_startup :Entering..........");
if (!serial) {
- dbg("%s\n", "Invalid Handler");
+ dbg("%s", "Invalid Handler");
return -1;
}
dev = serial->dev;
- dbg("%s\n", "Entering...");
+ dbg("%s", "Entering...");
+ dbg ("mos7840_startup: serial = %p", serial);
/* we set up the pointers to the endpoints in the mos7840_open *
* function, as the structures aren't created yet. */
/* set up port private structures */
for (i = 0; i < serial->num_ports; ++i) {
+ dbg ("mos7840_startup: configuring port %d............", i);
mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
if (mos7840_port == NULL) {
dev_err(&dev->dev, "%s - Out of memory\n", __func__);
@@ -2473,10 +2478,10 @@ static int mos7840_startup(struct usb_serial *serial)
status = mos7840_get_reg_sync(serial->port[i],
mos7840_port->ControlRegOffset, &Data);
if (status < 0) {
- dbg("Reading ControlReg failed status-0x%x\n", status);
+ dbg("Reading ControlReg failed status-0x%x", status);
break;
} else
- dbg("ControlReg Reading success val is %x, status%d\n",
+ dbg("ControlReg Reading success val is %x, status%d",
Data, status);
Data |= 0x08; /* setting driver done bit */
Data |= 0x04; /* sp1_bit to have cts change reflect in
@@ -2486,10 +2491,10 @@ static int mos7840_startup(struct usb_serial *serial)
status = mos7840_set_reg_sync(serial->port[i],
mos7840_port->ControlRegOffset, Data);
if (status < 0) {
- dbg("Writing ControlReg failed(rx_disable) status-0x%x\n", status);
+ dbg("Writing ControlReg failed(rx_disable) status-0x%x", status);
break;
} else
- dbg("ControlReg Writing success(rx_disable) status%d\n",
+ dbg("ControlReg Writing success(rx_disable) status%d",
status);
/* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
@@ -2498,48 +2503,48 @@ static int mos7840_startup(struct usb_serial *serial)
status = mos7840_set_reg_sync(serial->port[i],
(__u16) (mos7840_port->DcrRegOffset + 0), Data);
if (status < 0) {
- dbg("Writing DCR0 failed status-0x%x\n", status);
+ dbg("Writing DCR0 failed status-0x%x", status);
break;
} else
- dbg("DCR0 Writing success status%d\n", status);
+ dbg("DCR0 Writing success status%d", status);
Data = 0x05;
status = mos7840_set_reg_sync(serial->port[i],
(__u16) (mos7840_port->DcrRegOffset + 1), Data);
if (status < 0) {
- dbg("Writing DCR1 failed status-0x%x\n", status);
+ dbg("Writing DCR1 failed status-0x%x", status);
break;
} else
- dbg("DCR1 Writing success status%d\n", status);
+ dbg("DCR1 Writing success status%d", status);
Data = 0x24;
status = mos7840_set_reg_sync(serial->port[i],
(__u16) (mos7840_port->DcrRegOffset + 2), Data);
if (status < 0) {
- dbg("Writing DCR2 failed status-0x%x\n", status);
+ dbg("Writing DCR2 failed status-0x%x", status);
break;
} else
- dbg("DCR2 Writing success status%d\n", status);
+ dbg("DCR2 Writing success status%d", status);
/* write values in clkstart0x0 and clkmulti 0x20 */
Data = 0x0;
status = mos7840_set_reg_sync(serial->port[i],
CLK_START_VALUE_REGISTER, Data);
if (status < 0) {
- dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
+ dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x", status);
break;
} else
- dbg("CLK_START_VALUE_REGISTER Writing success status%d\n", status);
+ dbg("CLK_START_VALUE_REGISTER Writing success status%d", status);
Data = 0x20;
status = mos7840_set_reg_sync(serial->port[i],
CLK_MULTI_REGISTER, Data);
if (status < 0) {
- dbg("Writing CLK_MULTI_REGISTER failed status-0x%x\n",
+ dbg("Writing CLK_MULTI_REGISTER failed status-0x%x",
status);
goto error;
} else
- dbg("CLK_MULTI_REGISTER Writing success status%d\n",
+ dbg("CLK_MULTI_REGISTER Writing success status%d",
status);
/* write value 0x0 to scratchpad register */
@@ -2547,11 +2552,11 @@ static int mos7840_startup(struct usb_serial *serial)
status = mos7840_set_uart_reg(serial->port[i],
SCRATCH_PAD_REGISTER, Data);
if (status < 0) {
- dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x\n",
+ dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x",
status);
break;
} else
- dbg("SCRATCH_PAD_REGISTER Writing success status%d\n",
+ dbg("SCRATCH_PAD_REGISTER Writing success status%d",
status);
/* Zero Length flag register */
@@ -2562,30 +2567,30 @@ static int mos7840_startup(struct usb_serial *serial)
status = mos7840_set_reg_sync(serial->port[i],
(__u16) (ZLP_REG1 +
((__u16)mos7840_port->port_num)), Data);
- dbg("ZLIP offset%x\n",
+ dbg("ZLIP offset %x",
(__u16) (ZLP_REG1 +
((__u16) mos7840_port->port_num)));
if (status < 0) {
- dbg("Writing ZLP_REG%d failed status-0x%x\n",
+ dbg("Writing ZLP_REG%d failed status-0x%x",
i + 2, status);
break;
} else
- dbg("ZLP_REG%d Writing success status%d\n",
+ dbg("ZLP_REG%d Writing success status%d",
i + 2, status);
} else {
Data = 0xff;
status = mos7840_set_reg_sync(serial->port[i],
(__u16) (ZLP_REG1 +
((__u16)mos7840_port->port_num) - 0x1), Data);
- dbg("ZLIP offset%x\n",
+ dbg("ZLIP offset %x",
(__u16) (ZLP_REG1 +
((__u16) mos7840_port->port_num) - 0x1));
if (status < 0) {
- dbg("Writing ZLP_REG%d failed status-0x%x\n",
+ dbg("Writing ZLP_REG%d failed status-0x%x",
i + 1, status);
break;
} else
- dbg("ZLP_REG%d Writing success status%d\n",
+ dbg("ZLP_REG%d Writing success status%d",
i + 1, status);
}
@@ -2599,15 +2604,16 @@ static int mos7840_startup(struct usb_serial *serial)
goto error;
}
}
+ dbg ("mos7840_startup: all ports configured...........");
/* Zero Length flag enable */
Data = 0x0f;
status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
if (status < 0) {
- dbg("Writing ZLP_REG5 failed status-0x%x\n", status);
+ dbg("Writing ZLP_REG5 failed status-0x%x", status);
goto error;
} else
- dbg("ZLP_REG5 Writing success status%d\n", status);
+ dbg("ZLP_REG5 Writing success status%d", status);
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
@@ -2627,19 +2633,19 @@ error:
}
/****************************************************************************
- * mos7840_shutdown
+ * mos7840_disconnect
* This function is called whenever the device is removed from the usb bus.
****************************************************************************/
-static void mos7840_shutdown(struct usb_serial *serial)
+static void mos7840_disconnect(struct usb_serial *serial)
{
int i;
unsigned long flags;
struct moschip_port *mos7840_port;
- dbg("%s \n", " shutdown :entering..........");
+ dbg("%s", " disconnect :entering..........");
if (!serial) {
- dbg("%s", "Invalid Handler \n");
+ dbg("%s", "Invalid Handler");
return;
}
@@ -2656,14 +2662,45 @@ static void mos7840_shutdown(struct usb_serial *serial)
mos7840_port->zombie = 1;
spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
usb_kill_urb(mos7840_port->control_urb);
+ }
+ }
+
+ dbg("%s", "Thank u :: ");
+
+}
+
+/****************************************************************************
+ * mos7840_release
+ * This function is called when the usb_serial structure is freed.
+ ****************************************************************************/
+
+static void mos7840_release(struct usb_serial *serial)
+{
+ int i;
+ struct moschip_port *mos7840_port;
+ dbg("%s", " release :entering..........");
+
+ if (!serial) {
+ dbg("%s", "Invalid Handler");
+ return;
+ }
+
+ /* check for the ports to be closed,close the ports and disconnect */
+
+ /* free private structure allocated for serial port *
+ * stop reads and writes on all ports */
+
+ for (i = 0; i < serial->num_ports; ++i) {
+ mos7840_port = mos7840_get_port_private(serial->port[i]);
+ dbg("mos7840_port %d = %p", i, mos7840_port);
+ if (mos7840_port) {
kfree(mos7840_port->ctrl_buf);
kfree(mos7840_port->dr);
kfree(mos7840_port);
}
- mos7840_set_port_private(serial->port[i], NULL);
}
- dbg("%s\n", "Thank u :: ");
+ dbg("%s", "Thank u :: ");
}
@@ -2701,7 +2738,8 @@ static struct usb_serial_driver moschip7840_4port_device = {
.tiocmget = mos7840_tiocmget,
.tiocmset = mos7840_tiocmset,
.attach = mos7840_startup,
- .shutdown = mos7840_shutdown,
+ .disconnect = mos7840_disconnect,
+ .release = mos7840_release,
.read_bulk_callback = mos7840_bulk_in_callback,
.read_int_callback = mos7840_interrupt_callback,
};
@@ -2714,7 +2752,7 @@ static int __init moschip7840_init(void)
{
int retval;
- dbg("%s \n", " mos7840_init :entering..........");
+ dbg("%s", " mos7840_init :entering..........");
/* Register with the usb serial */
retval = usb_serial_register(&moschip7840_4port_device);
@@ -2722,14 +2760,14 @@ static int __init moschip7840_init(void)
if (retval)
goto failed_port_device_register;
- dbg("%s\n", "Entring...");
+ dbg("%s", "Entering...");
printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
DRIVER_DESC "\n");
/* Register with the usb */
retval = usb_register(&io_driver);
if (retval == 0) {
- dbg("%s\n", "Leaving...");
+ dbg("%s", "Leaving...");
return 0;
}
usb_serial_deregister(&moschip7840_4port_device);
@@ -2744,13 +2782,13 @@ failed_port_device_register:
static void __exit moschip7840_exit(void)
{
- dbg("%s \n", " mos7840_exit :entering..........");
+ dbg("%s", " mos7840_exit :entering..........");
usb_deregister(&io_driver);
usb_serial_deregister(&moschip7840_4port_device);
- dbg("%s\n", "Entring...");
+ dbg("%s", "Entering...");
}
module_init(moschip7840_init);
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 1104617334f..56857ddbd70 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -72,7 +72,8 @@ static void omninet_write_bulk_callback(struct urb *urb);
static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int omninet_write_room(struct tty_struct *tty);
-static void omninet_shutdown(struct usb_serial *serial);
+static void omninet_disconnect(struct usb_serial *serial);
+static void omninet_release(struct usb_serial *serial);
static int omninet_attach(struct usb_serial *serial);
static struct usb_device_id id_table[] = {
@@ -108,7 +109,8 @@ static struct usb_serial_driver zyxel_omninet_device = {
.write_room = omninet_write_room,
.read_bulk_callback = omninet_read_bulk_callback,
.write_bulk_callback = omninet_write_bulk_callback,
- .shutdown = omninet_shutdown,
+ .disconnect = omninet_disconnect,
+ .release = omninet_release,
};
@@ -345,13 +347,22 @@ static void omninet_write_bulk_callback(struct urb *urb)
}
-static void omninet_shutdown(struct usb_serial *serial)
+static void omninet_disconnect(struct usb_serial *serial)
{
struct usb_serial_port *wport = serial->port[1];
- struct usb_serial_port *port = serial->port[0];
+
dbg("%s", __func__);
usb_kill_urb(wport->write_urb);
+}
+
+
+static void omninet_release(struct usb_serial *serial)
+{
+ struct usb_serial_port *port = serial->port[0];
+
+ dbg("%s", __func__);
+
kfree(usb_get_serial_port_data(port));
}
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index c20480aa975..336bba79ad3 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -463,7 +463,7 @@ error:
return retval;
}
-static void opticon_shutdown(struct usb_serial *serial)
+static void opticon_disconnect(struct usb_serial *serial)
{
struct opticon_private *priv = usb_get_serial_data(serial);
@@ -471,9 +471,16 @@ static void opticon_shutdown(struct usb_serial *serial)
usb_kill_urb(priv->bulk_read_urb);
usb_free_urb(priv->bulk_read_urb);
+}
+
+static void opticon_release(struct usb_serial *serial)
+{
+ struct opticon_private *priv = usb_get_serial_data(serial);
+
+ dbg("%s", __func__);
+
kfree(priv->bulk_in_buffer);
kfree(priv);
- usb_set_serial_data(serial, NULL);
}
static int opticon_suspend(struct usb_interface *intf, pm_message_t message)
@@ -524,7 +531,8 @@ static struct usb_serial_driver opticon_device = {
.close = opticon_close,
.write = opticon_write,
.write_room = opticon_write_room,
- .shutdown = opticon_shutdown,
+ .disconnect = opticon_disconnect,
+ .release = opticon_release,
.throttle = opticon_throttle,
.unthrottle = opticon_unthrottle,
.ioctl = opticon_ioctl,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index a16d69fadba..575816e6ba3 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -43,13 +43,16 @@
#include <linux/usb/serial.h>
/* Function prototypes */
+static int option_probe(struct usb_serial *serial,
+ const struct usb_device_id *id);
static int option_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *filp);
static void option_close(struct usb_serial_port *port);
static void option_dtr_rts(struct usb_serial_port *port, int on);
static int option_startup(struct usb_serial *serial);
-static void option_shutdown(struct usb_serial *serial);
+static void option_disconnect(struct usb_serial *serial);
+static void option_release(struct usb_serial *serial);
static int option_write_room(struct tty_struct *tty);
static void option_instat_callback(struct urb *urb);
@@ -202,9 +205,9 @@ static int option_resume(struct usb_serial *serial);
#define NOVATELWIRELESS_PRODUCT_MC727 0x4100
#define NOVATELWIRELESS_PRODUCT_MC950D 0x4400
#define NOVATELWIRELESS_PRODUCT_U727 0x5010
+#define NOVATELWIRELESS_PRODUCT_MC760 0x6000
/* FUTURE NOVATEL PRODUCTS */
-#define NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED 0X6000
#define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED 0X6001
#define NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED 0X7000
#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED 0X7001
@@ -305,6 +308,10 @@ static int option_resume(struct usb_serial *serial);
#define DLINK_PRODUCT_DWM_652 0x3e04
+/* TOSHIBA PRODUCTS */
+#define TOSHIBA_VENDOR_ID 0x0930
+#define TOSHIBA_PRODUCT_HSDPA_MINICARD 0x1302
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -422,7 +429,7 @@ static struct usb_device_id option_ids[] = {
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED) }, /* Novatel EVDO product */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC760) }, /* Novatel MC760/U760/USB760 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, /* Novatel HSPA Embedded product */
@@ -523,6 +530,7 @@ static struct usb_device_id option_ids[] = {
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
+ { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
@@ -550,6 +558,7 @@ static struct usb_serial_driver option_1port_device = {
.usb_driver = &option_driver,
.id_table = option_ids,
.num_ports = 1,
+ .probe = option_probe,
.open = option_open,
.close = option_close,
.dtr_rts = option_dtr_rts,
@@ -560,7 +569,8 @@ static struct usb_serial_driver option_1port_device = {
.tiocmget = option_tiocmget,
.tiocmset = option_tiocmset,
.attach = option_startup,
- .shutdown = option_shutdown,
+ .disconnect = option_disconnect,
+ .release = option_release,
.read_int_callback = option_instat_callback,
.suspend = option_suspend,
.resume = option_resume,
@@ -626,6 +636,18 @@ static void __exit option_exit(void)
module_init(option_init);
module_exit(option_exit);
+static int option_probe(struct usb_serial *serial,
+ const struct usb_device_id *id)
+{
+ /* D-Link DWM 652 still exposes CD-Rom emulation interface in modem mode */
+ if (serial->dev->descriptor.idVendor == DLINK_VENDOR_ID &&
+ serial->dev->descriptor.idProduct == DLINK_PRODUCT_DWM_652 &&
+ serial->interface->cur_altsetting->desc.bInterfaceClass == 0x8)
+ return -ENODEV;
+
+ return 0;
+}
+
static void option_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
@@ -1129,7 +1151,14 @@ static void stop_read_write_urbs(struct usb_serial *serial)
}
}
-static void option_shutdown(struct usb_serial *serial)
+static void option_disconnect(struct usb_serial *serial)
+{
+ dbg("%s", __func__);
+
+ stop_read_write_urbs(serial);
+}
+
+static void option_release(struct usb_serial *serial)
{
int i, j;
struct usb_serial_port *port;
@@ -1137,8 +1166,6 @@ static void option_shutdown(struct usb_serial *serial)
dbg("%s", __func__);
- stop_read_write_urbs(serial);
-
/* Now free them */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 7de54781fe6..3cece27325e 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -159,7 +159,7 @@ static int oti6858_tiocmget(struct tty_struct *tty, struct file *file);
static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static int oti6858_startup(struct usb_serial *serial);
-static void oti6858_shutdown(struct usb_serial *serial);
+static void oti6858_release(struct usb_serial *serial);
/* functions operating on buffers */
static struct oti6858_buf *oti6858_buf_alloc(unsigned int size);
@@ -194,7 +194,7 @@ static struct usb_serial_driver oti6858_device = {
.write_room = oti6858_write_room,
.chars_in_buffer = oti6858_chars_in_buffer,
.attach = oti6858_startup,
- .shutdown = oti6858_shutdown,
+ .release = oti6858_release,
};
struct oti6858_private {
@@ -782,7 +782,7 @@ static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
}
-static void oti6858_shutdown(struct usb_serial *serial)
+static void oti6858_release(struct usb_serial *serial)
{
struct oti6858_private *priv;
int i;
@@ -794,7 +794,6 @@ static void oti6858_shutdown(struct usb_serial *serial)
if (priv) {
oti6858_buf_free(priv->buf);
kfree(priv);
- usb_set_serial_port_data(serial->port[i], NULL);
}
}
}
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index e02dc3d643c..ec6c132a25b 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -878,7 +878,7 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
dbg("%s - error sending break = %d", __func__, result);
}
-static void pl2303_shutdown(struct usb_serial *serial)
+static void pl2303_release(struct usb_serial *serial)
{
int i;
struct pl2303_private *priv;
@@ -890,7 +890,6 @@ static void pl2303_shutdown(struct usb_serial *serial)
if (priv) {
pl2303_buf_free(priv->buf);
kfree(priv);
- usb_set_serial_port_data(serial->port[i], NULL);
}
}
}
@@ -927,6 +926,8 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
spin_lock_irqsave(&priv->lock, flags);
priv->line_status = data[status_idx];
spin_unlock_irqrestore(&priv->lock, flags);
+ if (priv->line_status & UART_BREAK_ERROR)
+ usb_serial_handle_break(port);
wake_up_interruptible(&priv->delta_msr_wait);
}
@@ -1037,7 +1038,8 @@ static void pl2303_read_bulk_callback(struct urb *urb)
if (line_status & UART_OVERRUN_ERROR)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
for (i = 0; i < urb->actual_length; ++i)
- tty_insert_flip_char(tty, data[i], tty_flag);
+ if (!usb_serial_handle_sysrq_char(port, data[i]))
+ tty_insert_flip_char(tty, data[i], tty_flag);
tty_flip_buffer_push(tty);
}
tty_kref_put(tty);
@@ -1120,7 +1122,7 @@ static struct usb_serial_driver pl2303_device = {
.write_room = pl2303_write_room,
.chars_in_buffer = pl2303_chars_in_buffer,
.attach = pl2303_startup,
- .shutdown = pl2303_shutdown,
+ .release = pl2303_release,
};
static int __init pl2303_init(void)
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 17ac34f4d66..032f7aeb40a 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -1,7 +1,10 @@
/*
USB Driver for Sierra Wireless
- Copyright (C) 2006, 2007, 2008 Kevin Lloyd <klloyd@sierrawireless.com>
+ Copyright (C) 2006, 2007, 2008 Kevin Lloyd <klloyd@sierrawireless.com>,
+
+ Copyright (C) 2008, 2009 Elina Pasheva, Matthew Safar, Rory Filer
+ <linux@sierrawireless.com>
IMPORTANT DISCLAIMER: This driver is not commercially supported by
Sierra Wireless. Use at your own risk.
@@ -14,8 +17,8 @@
Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
*/
-#define DRIVER_VERSION "v.1.3.3"
-#define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
+#define DRIVER_VERSION "v.1.3.7"
+#define DRIVER_AUTHOR "Kevin Lloyd, Elina Pasheva, Matthew Safar, Rory Filer"
#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
#include <linux/kernel.h>
@@ -30,10 +33,15 @@
#define SWIMS_USB_REQUEST_SetPower 0x00
#define SWIMS_USB_REQUEST_SetNmea 0x07
-#define N_IN_URB 4
-#define N_OUT_URB 4
+#define N_IN_URB 8
+#define N_OUT_URB 64
#define IN_BUFLEN 4096
+#define MAX_TRANSFER (PAGE_SIZE - 512)
+/* MAX_TRANSFER is chosen so that the VM is not stressed by
+ allocations > PAGE_SIZE and the number of packets in a page
+ is an integer 512 is the largest possible packet on EHCI */
+
static int debug;
static int nmea;
@@ -46,7 +54,7 @@ struct sierra_iface_info {
static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
{
int result;
- dev_dbg(&udev->dev, "%s", __func__);
+ dev_dbg(&udev->dev, "%s\n", __func__);
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
SWIMS_USB_REQUEST_SetPower, /* __u8 request */
USB_TYPE_VENDOR, /* __u8 request type */
@@ -61,7 +69,7 @@ static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable)
{
int result;
- dev_dbg(&udev->dev, "%s", __func__);
+ dev_dbg(&udev->dev, "%s\n", __func__);
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
SWIMS_USB_REQUEST_SetNmea, /* __u8 request */
USB_TYPE_VENDOR, /* __u8 request type */
@@ -75,18 +83,22 @@ static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable)
static int sierra_calc_num_ports(struct usb_serial *serial)
{
- int result;
- int *num_ports = usb_get_serial_data(serial);
- dev_dbg(&serial->dev->dev, "%s", __func__);
+ int num_ports = 0;
+ u8 ifnum, numendpoints;
- result = *num_ports;
+ dev_dbg(&serial->dev->dev, "%s\n", __func__);
- if (result) {
- kfree(num_ports);
- usb_set_serial_data(serial, NULL);
- }
+ ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+ numendpoints = serial->interface->cur_altsetting->desc.bNumEndpoints;
- return result;
+ /* Dummy interface present on some SKUs should be ignored */
+ if (ifnum == 0x99)
+ num_ports = 0;
+ else if (numendpoints <= 3)
+ num_ports = 1;
+ else
+ num_ports = (numendpoints-1)/2;
+ return num_ports;
}
static int is_blacklisted(const u8 ifnum,
@@ -111,7 +123,7 @@ static int sierra_calc_interface(struct usb_serial *serial)
int interface;
struct usb_interface *p_interface;
struct usb_host_interface *p_host_interface;
- dev_dbg(&serial->dev->dev, "%s", __func__);
+ dev_dbg(&serial->dev->dev, "%s\n", __func__);
/* Get the interface structure pointer from the serial struct */
p_interface = serial->interface;
@@ -132,23 +144,12 @@ static int sierra_probe(struct usb_serial *serial,
{
int result = 0;
struct usb_device *udev;
- int *num_ports;
u8 ifnum;
- u8 numendpoints;
- dev_dbg(&serial->dev->dev, "%s", __func__);
-
- num_ports = kmalloc(sizeof(*num_ports), GFP_KERNEL);
- if (!num_ports)
- return -ENOMEM;
-
- ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
- numendpoints = serial->interface->cur_altsetting->desc.bNumEndpoints;
udev = serial->dev;
+ dev_dbg(&udev->dev, "%s\n", __func__);
- /* Figure out the interface number from the serial structure */
ifnum = sierra_calc_interface(serial);
-
/*
* If this interface supports more than 1 alternate
* select the 2nd one
@@ -160,20 +161,6 @@ static int sierra_probe(struct usb_serial *serial,
usb_set_interface(udev, ifnum, 1);
}
- /* Dummy interface present on some SKUs should be ignored */
- if (ifnum == 0x99)
- *num_ports = 0;
- else if (numendpoints <= 3)
- *num_ports = 1;
- else
- *num_ports = (numendpoints-1)/2;
-
- /*
- * save off our num_ports info so that we can use it in the
- * calc_num_ports callback
- */
- usb_set_serial_data(serial, (void *)num_ports);
-
/* ifnum could have changed - by calling usb_set_interface */
ifnum = sierra_calc_interface(serial);
@@ -289,7 +276,7 @@ static int sierra_send_setup(struct usb_serial_port *port)
__u16 interface = 0;
int val = 0;
- dev_dbg(&port->dev, "%s", __func__);
+ dev_dbg(&port->dev, "%s\n", __func__);
portdata = usb_get_serial_port_data(port);
@@ -332,7 +319,7 @@ static int sierra_send_setup(struct usb_serial_port *port)
static void sierra_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
- dev_dbg(&port->dev, "%s", __func__);
+ dev_dbg(&port->dev, "%s\n", __func__);
tty_termios_copy_hw(tty->termios, old_termios);
sierra_send_setup(port);
}
@@ -343,7 +330,7 @@ static int sierra_tiocmget(struct tty_struct *tty, struct file *file)
unsigned int value;
struct sierra_port_private *portdata;
- dev_dbg(&port->dev, "%s", __func__);
+ dev_dbg(&port->dev, "%s\n", __func__);
portdata = usb_get_serial_port_data(port);
value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
@@ -394,14 +381,14 @@ static void sierra_outdat_callback(struct urb *urb)
int status = urb->status;
unsigned long flags;
- dev_dbg(&port->dev, "%s - port %d", __func__, port->number);
+ dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
/* free up the transfer buffer, as usb_free_urb() does not do this */
kfree(urb->transfer_buffer);
if (status)
dev_dbg(&port->dev, "%s - nonzero write bulk status "
- "received: %d", __func__, status);
+ "received: %d\n", __func__, status);
spin_lock_irqsave(&portdata->lock, flags);
--portdata->outstanding_urbs;
@@ -419,50 +406,61 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
unsigned long flags;
unsigned char *buffer;
struct urb *urb;
- int status;
+ size_t writesize = min((size_t)count, (size_t)MAX_TRANSFER);
+ int retval = 0;
+
+ /* verify that we actually have some data to write */
+ if (count == 0)
+ return 0;
portdata = usb_get_serial_port_data(port);
- dev_dbg(&port->dev, "%s: write (%d chars)", __func__, count);
+ dev_dbg(&port->dev, "%s: write (%zd bytes)\n", __func__, writesize);
spin_lock_irqsave(&portdata->lock, flags);
+ dev_dbg(&port->dev, "%s - outstanding_urbs: %d\n", __func__,
+ portdata->outstanding_urbs);
if (portdata->outstanding_urbs > N_OUT_URB) {
spin_unlock_irqrestore(&portdata->lock, flags);
dev_dbg(&port->dev, "%s - write limit hit\n", __func__);
return 0;
}
portdata->outstanding_urbs++;
+ dev_dbg(&port->dev, "%s - 1, outstanding_urbs: %d\n", __func__,
+ portdata->outstanding_urbs);
spin_unlock_irqrestore(&portdata->lock, flags);
- buffer = kmalloc(count, GFP_ATOMIC);
+ buffer = kmalloc(writesize, GFP_ATOMIC);
if (!buffer) {
dev_err(&port->dev, "out of memory\n");
- count = -ENOMEM;
+ retval = -ENOMEM;
goto error_no_buffer;
}
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
dev_err(&port->dev, "no more free urbs\n");
- count = -ENOMEM;
+ retval = -ENOMEM;
goto error_no_urb;
}
- memcpy(buffer, buf, count);
+ memcpy(buffer, buf, writesize);
- usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, writesize, buffer);
usb_fill_bulk_urb(urb, serial->dev,
usb_sndbulkpipe(serial->dev,
port->bulk_out_endpointAddress),
- buffer, count, sierra_outdat_callback, port);
+ buffer, writesize, sierra_outdat_callback, port);
+
+ /* Handle the need to send a zero length packet */
+ urb->transfer_flags |= URB_ZERO_PACKET;
/* send it down the pipe */
- status = usb_submit_urb(urb, GFP_ATOMIC);
- if (status) {
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval) {
dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
- "with status = %d\n", __func__, status);
- count = status;
+ "with status = %d\n", __func__, retval);
goto error;
}
@@ -470,7 +468,7 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
* really free it when it is finished with it */
usb_free_urb(urb);
- return count;
+ return writesize;
error:
usb_free_urb(urb);
error_no_urb:
@@ -478,8 +476,10 @@ error_no_urb:
error_no_buffer:
spin_lock_irqsave(&portdata->lock, flags);
--portdata->outstanding_urbs;
+ dev_dbg(&port->dev, "%s - 2. outstanding_urbs: %d\n", __func__,
+ portdata->outstanding_urbs);
spin_unlock_irqrestore(&portdata->lock, flags);
- return count;
+ return retval;
}
static void sierra_indat_callback(struct urb *urb)
@@ -491,33 +491,39 @@ static void sierra_indat_callback(struct urb *urb)
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
- dbg("%s: %p", __func__, urb);
-
endpoint = usb_pipeendpoint(urb->pipe);
- port = urb->context;
+ port = urb->context;
+
+ dev_dbg(&port->dev, "%s: %p\n", __func__, urb);
if (status) {
dev_dbg(&port->dev, "%s: nonzero status: %d on"
- " endpoint %02x.", __func__, status, endpoint);
+ " endpoint %02x\n", __func__, status, endpoint);
} else {
if (urb->actual_length) {
tty = tty_port_tty_get(&port->port);
+
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
+
tty_kref_put(tty);
- } else
+ usb_serial_debug_data(debug, &port->dev, __func__,
+ urb->actual_length, data);
+ } else {
dev_dbg(&port->dev, "%s: empty read urb"
- " received", __func__);
-
- /* Resubmit urb so we continue receiving */
- if (port->port.count && status != -ESHUTDOWN && status != -EPERM) {
- err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err)
- dev_err(&port->dev, "resubmit read urb failed."
- "(%d)\n", err);
+ " received\n", __func__);
}
}
+
+ /* Resubmit urb so we continue receiving */
+ if (port->port.count && status != -ESHUTDOWN && status != -EPERM) {
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err)
+ dev_err(&port->dev, "resubmit read urb failed."
+ "(%d)\n", err);
+ }
+
return;
}
@@ -529,8 +535,7 @@ static void sierra_instat_callback(struct urb *urb)
struct sierra_port_private *portdata = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
- dev_dbg(&port->dev, "%s", __func__);
- dev_dbg(&port->dev, "%s: urb %p port %p has data %p", __func__,
+ dev_dbg(&port->dev, "%s: urb %p port %p has data %p\n", __func__,
urb, port, portdata);
if (status == 0) {
@@ -550,7 +555,7 @@ static void sierra_instat_callback(struct urb *urb)
sizeof(struct usb_ctrlrequest));
struct tty_struct *tty;
- dev_dbg(&port->dev, "%s: signal x%x", __func__,
+ dev_dbg(&port->dev, "%s: signal x%x\n", __func__,
signals);
old_dcd_state = portdata->dcd_state;
@@ -565,20 +570,20 @@ static void sierra_instat_callback(struct urb *urb)
tty_hangup(tty);
tty_kref_put(tty);
} else {
- dev_dbg(&port->dev, "%s: type %x req %x",
+ dev_dbg(&port->dev, "%s: type %x req %x\n",
__func__, req_pkt->bRequestType,
req_pkt->bRequest);
}
} else
- dev_dbg(&port->dev, "%s: error %d", __func__, status);
+ dev_dbg(&port->dev, "%s: error %d\n", __func__, status);
/* Resubmit urb so we continue receiving IRQ data */
- if (status != -ESHUTDOWN) {
+ if (port->port.count && status != -ESHUTDOWN && status != -ENOENT) {
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
- dev_dbg(&port->dev, "%s: resubmit intr urb "
- "failed. (%d)", __func__, err);
+ dev_err(&port->dev, "%s: resubmit intr urb "
+ "failed. (%d)\n", __func__, err);
}
}
@@ -588,7 +593,7 @@ static int sierra_write_room(struct tty_struct *tty)
struct sierra_port_private *portdata = usb_get_serial_port_data(port);
unsigned long flags;
- dev_dbg(&port->dev, "%s - port %d", __func__, port->number);
+ dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
/* try to give a good number back based on if we have any free urbs at
* this point in time */
@@ -729,7 +734,7 @@ static int sierra_open(struct tty_struct *tty,
portdata = usb_get_serial_port_data(port);
- dev_dbg(&port->dev, "%s", __func__);
+ dev_dbg(&port->dev, "%s\n", __func__);
/* Set some sane defaults */
portdata->rts_state = 1;
@@ -782,7 +787,7 @@ static int sierra_startup(struct usb_serial *serial)
struct sierra_port_private *portdata;
int i;
- dev_dbg(&serial->dev->dev, "%s", __func__);
+ dev_dbg(&serial->dev->dev, "%s\n", __func__);
/* Set Device mode to D0 */
sierra_set_power_state(serial->dev, 0x0000);
@@ -797,7 +802,7 @@ static int sierra_startup(struct usb_serial *serial)
portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
if (!portdata) {
dev_dbg(&port->dev, "%s: kmalloc for "
- "sierra_port_private (%d) failed!.",
+ "sierra_port_private (%d) failed!.\n",
__func__, i);
return -ENOMEM;
}
@@ -809,13 +814,13 @@ static int sierra_startup(struct usb_serial *serial)
return 0;
}
-static void sierra_shutdown(struct usb_serial *serial)
+static void sierra_disconnect(struct usb_serial *serial)
{
int i;
struct usb_serial_port *port;
struct sierra_port_private *portdata;
- dev_dbg(&serial->dev->dev, "%s", __func__);
+ dev_dbg(&serial->dev->dev, "%s\n", __func__);
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
@@ -848,7 +853,7 @@ static struct usb_serial_driver sierra_device = {
.tiocmget = sierra_tiocmget,
.tiocmset = sierra_tiocmset,
.attach = sierra_startup,
- .shutdown = sierra_shutdown,
+ .disconnect = sierra_disconnect,
.read_int_callback = sierra_instat_callback,
};
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 8f7ed8f1399..3c249d8e8b8 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -356,7 +356,7 @@ cleanup:
}
/* call when the device plug out. free all the memory alloced by probe */
-static void spcp8x5_shutdown(struct usb_serial *serial)
+static void spcp8x5_release(struct usb_serial *serial)
{
int i;
struct spcp8x5_private *priv;
@@ -366,7 +366,6 @@ static void spcp8x5_shutdown(struct usb_serial *serial)
if (priv) {
free_ringbuf(priv->buf);
kfree(priv);
- usb_set_serial_port_data(serial->port[i] , NULL);
}
}
}
@@ -1020,7 +1019,7 @@ static struct usb_serial_driver spcp8x5_device = {
.write_bulk_callback = spcp8x5_write_bulk_callback,
.chars_in_buffer = spcp8x5_chars_in_buffer,
.attach = spcp8x5_startup,
- .shutdown = spcp8x5_shutdown,
+ .release = spcp8x5_release,
};
static int __init spcp8x5_init(void)
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 8b07ebc6bae..6157fac9366 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -267,7 +267,7 @@ error:
return retval;
}
-static void symbol_shutdown(struct usb_serial *serial)
+static void symbol_disconnect(struct usb_serial *serial)
{
struct symbol_private *priv = usb_get_serial_data(serial);
@@ -275,9 +275,16 @@ static void symbol_shutdown(struct usb_serial *serial)
usb_kill_urb(priv->int_urb);
usb_free_urb(priv->int_urb);
+}
+
+static void symbol_release(struct usb_serial *serial)
+{
+ struct symbol_private *priv = usb_get_serial_data(serial);
+
+ dbg("%s", __func__);
+
kfree(priv->int_buffer);
kfree(priv);
- usb_set_serial_data(serial, NULL);
}
static struct usb_driver symbol_driver = {
@@ -299,7 +306,8 @@ static struct usb_serial_driver symbol_device = {
.attach = symbol_startup,
.open = symbol_open,
.close = symbol_close,
- .shutdown = symbol_shutdown,
+ .disconnect = symbol_disconnect,
+ .release = symbol_release,
.throttle = symbol_throttle,
.unthrottle = symbol_unthrottle,
};
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 42cb04c403b..991d8232e37 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -97,7 +97,7 @@ struct ti_device {
/* Function Declarations */
static int ti_startup(struct usb_serial *serial);
-static void ti_shutdown(struct usb_serial *serial);
+static void ti_release(struct usb_serial *serial);
static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
struct file *file);
static void ti_close(struct usb_serial_port *port);
@@ -230,7 +230,7 @@ static struct usb_serial_driver ti_1port_device = {
.id_table = ti_id_table_3410,
.num_ports = 1,
.attach = ti_startup,
- .shutdown = ti_shutdown,
+ .release = ti_release,
.open = ti_open,
.close = ti_close,
.write = ti_write,
@@ -258,7 +258,7 @@ static struct usb_serial_driver ti_2port_device = {
.id_table = ti_id_table_5052,
.num_ports = 2,
.attach = ti_startup,
- .shutdown = ti_shutdown,
+ .release = ti_release,
.open = ti_open,
.close = ti_close,
.write = ti_write,
@@ -473,7 +473,7 @@ free_tdev:
}
-static void ti_shutdown(struct usb_serial *serial)
+static void ti_release(struct usb_serial *serial)
{
int i;
struct ti_device *tdev = usb_get_serial_data(serial);
@@ -486,12 +486,10 @@ static void ti_shutdown(struct usb_serial *serial)
if (tport) {
ti_buf_free(tport->tp_write_buf);
kfree(tport);
- usb_set_serial_port_data(serial->port[i], NULL);
}
}
kfree(tdev);
- usb_set_serial_data(serial, NULL);
}
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 1967a7edc10..d595aa5586a 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -141,6 +141,14 @@ static void destroy_serial(struct kref *kref)
if (serial->minor != SERIAL_TTY_NO_MINOR)
return_serial(serial);
+ serial->type->release(serial);
+
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ if (port)
+ put_device(&port->dev);
+ }
+
/* If this is a "fake" port, we have to clean it up here, as it will
* not get cleaned up in port_release() as it was never registered with
* the driver core */
@@ -148,9 +156,8 @@ static void destroy_serial(struct kref *kref)
for (i = serial->num_ports;
i < serial->num_port_pointers; ++i) {
port = serial->port[i];
- if (!port)
- continue;
- port_free(port);
+ if (port)
+ port_free(port);
}
}
@@ -1046,10 +1053,15 @@ int usb_serial_probe(struct usb_interface *interface,
dev_set_name(&port->dev, "ttyUSB%d", port->number);
dbg ("%s - registering %s", __func__, dev_name(&port->dev));
+ port->dev_state = PORT_REGISTERING;
retval = device_register(&port->dev);
- if (retval)
+ if (retval) {
dev_err(&port->dev, "Error registering port device, "
"continuing\n");
+ port->dev_state = PORT_UNREGISTERED;
+ } else {
+ port->dev_state = PORT_REGISTERED;
+ }
}
usb_serial_console_init(debug, minor);
@@ -1113,10 +1125,6 @@ void usb_serial_disconnect(struct usb_interface *interface)
serial->disconnected = 1;
mutex_unlock(&serial->disc_mutex);
- /* Unfortunately, many of the sub-drivers expect the port structures
- * to exist when their shutdown method is called, so we have to go
- * through this awkward two-step unregistration procedure.
- */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
if (port) {
@@ -1130,17 +1138,25 @@ void usb_serial_disconnect(struct usb_interface *interface)
}
kill_traffic(port);
cancel_work_sync(&port->work);
- device_del(&port->dev);
- }
- }
- serial->type->shutdown(serial);
- for (i = 0; i < serial->num_ports; ++i) {
- port = serial->port[i];
- if (port) {
- put_device(&port->dev);
- serial->port[i] = NULL;
+ if (port->dev_state == PORT_REGISTERED) {
+
+ /* Make sure the port is bound so that the
+ * driver's port_remove method is called.
+ */
+ if (!port->dev.driver) {
+ int rc;
+
+ port->dev.driver =
+ &serial->type->driver;
+ rc = device_bind_driver(&port->dev);
+ }
+ port->dev_state = PORT_UNREGISTERING;
+ device_del(&port->dev);
+ port->dev_state = PORT_UNREGISTERED;
+ }
}
}
+ serial->type->disconnect(serial);
/* let the last holder of this object
* cause it to be cleaned up */
@@ -1318,7 +1334,8 @@ static void fixup_generic(struct usb_serial_driver *device)
set_to_generic_if_null(device, chars_in_buffer);
set_to_generic_if_null(device, read_bulk_callback);
set_to_generic_if_null(device, write_bulk_callback);
- set_to_generic_if_null(device, shutdown);
+ set_to_generic_if_null(device, disconnect);
+ set_to_generic_if_null(device, release);
}
int usb_serial_register(struct usb_serial_driver *driver)
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 6c9cbb59552..614800972dc 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -15,7 +15,19 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#define URB_DEBUG_MAX_IN_FLIGHT_URBS 4000
#define USB_DEBUG_MAX_PACKET_SIZE 8
+#define USB_DEBUG_BRK_SIZE 8
+static char USB_DEBUG_BRK[USB_DEBUG_BRK_SIZE] = {
+ 0x00,
+ 0xff,
+ 0x01,
+ 0xfe,
+ 0x00,
+ 0xfe,
+ 0x01,
+ 0xff,
+};
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x0525, 0x127a) },
@@ -38,6 +50,32 @@ static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port,
return usb_serial_generic_open(tty, port, filp);
}
+/* This HW really does not support a serial break, so one will be
+ * emulated when ever the break state is set to true.
+ */
+static void usb_debug_break_ctl(struct tty_struct *tty, int break_state)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ if (!break_state)
+ return;
+ usb_serial_generic_write(tty, port, USB_DEBUG_BRK, USB_DEBUG_BRK_SIZE);
+}
+
+static void usb_debug_read_bulk_callback(struct urb *urb)
+{
+ struct usb_serial_port *port = urb->context;
+
+ if (urb->actual_length == USB_DEBUG_BRK_SIZE &&
+ memcmp(urb->transfer_buffer, USB_DEBUG_BRK,
+ USB_DEBUG_BRK_SIZE) == 0) {
+ usb_serial_handle_break(port);
+ usb_serial_generic_resubmit_read_urb(port, GFP_ATOMIC);
+ return;
+ }
+
+ usb_serial_generic_read_bulk_callback(urb);
+}
+
static struct usb_serial_driver debug_device = {
.driver = {
.owner = THIS_MODULE,
@@ -46,6 +84,9 @@ static struct usb_serial_driver debug_device = {
.id_table = id_table,
.num_ports = 1,
.open = usb_debug_open,
+ .max_in_flight_urbs = URB_DEBUG_MAX_IN_FLIGHT_URBS,
+ .break_ctl = usb_debug_break_ctl,
+ .read_bulk_callback = usb_debug_read_bulk_callback,
};
static int __init debug_init(void)
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index b15f1c0e1d4..f5d0f64dcc5 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -47,7 +47,7 @@ static void visor_unthrottle(struct tty_struct *tty);
static int visor_probe(struct usb_serial *serial,
const struct usb_device_id *id);
static int visor_calc_num_ports(struct usb_serial *serial);
-static void visor_shutdown(struct usb_serial *serial);
+static void visor_release(struct usb_serial *serial);
static void visor_write_bulk_callback(struct urb *urb);
static void visor_read_bulk_callback(struct urb *urb);
static void visor_read_int_callback(struct urb *urb);
@@ -202,7 +202,7 @@ static struct usb_serial_driver handspring_device = {
.attach = treo_attach,
.probe = visor_probe,
.calc_num_ports = visor_calc_num_ports,
- .shutdown = visor_shutdown,
+ .release = visor_release,
.write = visor_write,
.write_room = visor_write_room,
.write_bulk_callback = visor_write_bulk_callback,
@@ -227,7 +227,7 @@ static struct usb_serial_driver clie_5_device = {
.attach = clie_5_attach,
.probe = visor_probe,
.calc_num_ports = visor_calc_num_ports,
- .shutdown = visor_shutdown,
+ .release = visor_release,
.write = visor_write,
.write_room = visor_write_room,
.write_bulk_callback = visor_write_bulk_callback,
@@ -918,7 +918,7 @@ static int clie_5_attach(struct usb_serial *serial)
return generic_startup(serial);
}
-static void visor_shutdown(struct usb_serial *serial)
+static void visor_release(struct usb_serial *serial)
{
struct visor_private *priv;
int i;
@@ -927,10 +927,7 @@ static void visor_shutdown(struct usb_serial *serial)
for (i = 0; i < serial->num_ports; i++) {
priv = usb_get_serial_port_data(serial->port[i]);
- if (priv) {
- usb_set_serial_port_data(serial->port[i], NULL);
- kfree(priv);
- }
+ kfree(priv);
}
}
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 7c7295d09f3..8d126dd7a02 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -144,7 +144,7 @@ static int whiteheat_firmware_attach(struct usb_serial *serial);
/* function prototypes for the Connect Tech WhiteHEAT serial converter */
static int whiteheat_attach(struct usb_serial *serial);
-static void whiteheat_shutdown(struct usb_serial *serial);
+static void whiteheat_release(struct usb_serial *serial);
static int whiteheat_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
static void whiteheat_close(struct usb_serial_port *port);
@@ -189,7 +189,7 @@ static struct usb_serial_driver whiteheat_device = {
.id_table = id_table_std,
.num_ports = 4,
.attach = whiteheat_attach,
- .shutdown = whiteheat_shutdown,
+ .release = whiteheat_release,
.open = whiteheat_open,
.close = whiteheat_close,
.write = whiteheat_write,
@@ -617,7 +617,7 @@ no_command_buffer:
}
-static void whiteheat_shutdown(struct usb_serial *serial)
+static void whiteheat_release(struct usb_serial *serial)
{
struct usb_serial_port *command_port;
struct usb_serial_port *port;
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 2dd9bd4bff5..ec17c96371a 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -52,7 +52,7 @@ int usb_stor_euscsi_init(struct us_data *us)
us->iobuf[0] = 0x1;
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR,
- 0x01, 0x0, us->iobuf, 0x1, 5*HZ);
+ 0x01, 0x0, us->iobuf, 0x1, 5000);
US_DEBUGP("-- result is %d\n", result);
return 0;
@@ -80,14 +80,16 @@ int usb_stor_ucr61s2b_init(struct us_data *us)
res = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb,
US_BULK_CB_WRAP_LEN, &partial);
- if(res)
- return res;
+ if (res)
+ return -EIO;
US_DEBUGP("Getting status packet...\n");
res = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs,
US_BULK_CS_WRAP_LEN, &partial);
+ if (res)
+ return -EIO;
- return (res ? -1 : 0);
+ return 0;
}
/* This places the HUAWEI E220 devices in multi-port mode */
@@ -99,6 +101,6 @@ int usb_stor_huawei_e220_init(struct us_data *us)
USB_REQ_SET_FEATURE,
USB_TYPE_STANDARD | USB_RECIP_DEVICE,
0x01, 0x0, NULL, 0x0, 1000);
- US_DEBUGP("usb_control_msg performing result is %d\n", result);
- return (result ? 0 : -1);
+ US_DEBUGP("Huawei mode set result is %d\n", result);
+ return (result ? 0 : -ENODEV);
}
diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c
index 353f922939a..d41cc0a970f 100644
--- a/drivers/usb/storage/option_ms.c
+++ b/drivers/usb/storage/option_ms.c
@@ -37,7 +37,7 @@ MODULE_PARM_DESC(option_zero_cd, "ZeroCD mode (1=Force Modem (default),"
#define RESPONSE_LEN 1024
-static int option_rezero(struct us_data *us, int ep_in, int ep_out)
+static int option_rezero(struct us_data *us)
{
const unsigned char rezero_msg[] = {
0x55, 0x53, 0x42, 0x43, 0x78, 0x56, 0x34, 0x12,
@@ -54,10 +54,10 @@ static int option_rezero(struct us_data *us, int ep_in, int ep_out)
if (buffer == NULL)
return USB_STOR_TRANSPORT_ERROR;
- memcpy(buffer, rezero_msg, sizeof (rezero_msg));
+ memcpy(buffer, rezero_msg, sizeof(rezero_msg));
result = usb_stor_bulk_transfer_buf(us,
- usb_sndbulkpipe(us->pusb_dev, ep_out),
- buffer, sizeof (rezero_msg), NULL);
+ us->send_bulk_pipe,
+ buffer, sizeof(rezero_msg), NULL);
if (result != USB_STOR_XFER_GOOD) {
result = USB_STOR_XFER_ERROR;
goto out;
@@ -66,9 +66,15 @@ static int option_rezero(struct us_data *us, int ep_in, int ep_out)
/* Some of the devices need to be asked for a response, but we don't
* care what that response is.
*/
- result = usb_stor_bulk_transfer_buf(us,
- usb_sndbulkpipe(us->pusb_dev, ep_out),
+ usb_stor_bulk_transfer_buf(us,
+ us->recv_bulk_pipe,
buffer, RESPONSE_LEN, NULL);
+
+ /* Read the CSW */
+ usb_stor_bulk_transfer_buf(us,
+ us->recv_bulk_pipe,
+ buffer, 13, NULL);
+
result = USB_STOR_XFER_GOOD;
out:
@@ -76,63 +82,75 @@ out:
return result;
}
-int option_ms_init(struct us_data *us)
+static int option_inquiry(struct us_data *us)
{
- struct usb_device *udev;
- struct usb_interface *intf;
- struct usb_host_interface *iface_desc;
- struct usb_endpoint_descriptor *endpoint = NULL;
- u8 ep_in = 0, ep_out = 0;
- int ep_in_size = 0, ep_out_size = 0;
- int i, result;
-
- udev = us->pusb_dev;
- intf = us->pusb_intf;
-
- /* Ensure it's really a ZeroCD device; devices that are already
- * in modem mode return 0xFF for class, subclass, and protocol.
- */
- if (udev->descriptor.bDeviceClass != 0 ||
- udev->descriptor.bDeviceSubClass != 0 ||
- udev->descriptor.bDeviceProtocol != 0)
- return USB_STOR_TRANSPORT_GOOD;
+ const unsigned char inquiry_msg[] = {
+ 0x55, 0x53, 0x42, 0x43, 0x12, 0x34, 0x56, 0x78,
+ 0x24, 0x00, 0x00, 0x00, 0x80, 0x00, 0x06, 0x12,
+ 0x00, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+ };
+ char *buffer;
+ int result;
- US_DEBUGP("Option MS: option_ms_init called\n");
+ US_DEBUGP("Option MS: %s", "device inquiry for vendor name\n");
- /* Find the right mass storage interface */
- iface_desc = intf->cur_altsetting;
- if (iface_desc->desc.bInterfaceClass != 0x8 ||
- iface_desc->desc.bInterfaceSubClass != 0x6 ||
- iface_desc->desc.bInterfaceProtocol != 0x50) {
- US_DEBUGP("Option MS: mass storage interface not found, no action "
- "required\n");
- return USB_STOR_TRANSPORT_GOOD;
- }
+ buffer = kzalloc(0x24, GFP_KERNEL);
+ if (buffer == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
- /* Find the mass storage bulk endpoints */
- for (i = 0; i < iface_desc->desc.bNumEndpoints && (!ep_in_size || !ep_out_size); ++i) {
- endpoint = &iface_desc->endpoint[i].desc;
-
- if (usb_endpoint_is_bulk_in(endpoint)) {
- ep_in = usb_endpoint_num(endpoint);
- ep_in_size = le16_to_cpu(endpoint->wMaxPacketSize);
- } else if (usb_endpoint_is_bulk_out(endpoint)) {
- ep_out = usb_endpoint_num(endpoint);
- ep_out_size = le16_to_cpu(endpoint->wMaxPacketSize);
- }
+ memcpy(buffer, inquiry_msg, sizeof(inquiry_msg));
+ result = usb_stor_bulk_transfer_buf(us,
+ us->send_bulk_pipe,
+ buffer, sizeof(inquiry_msg), NULL);
+ if (result != USB_STOR_XFER_GOOD) {
+ result = USB_STOR_XFER_ERROR;
+ goto out;
}
- /* Can't find the mass storage endpoints */
- if (!ep_in_size || !ep_out_size) {
- US_DEBUGP("Option MS: mass storage endpoints not found, no action "
- "required\n");
- return USB_STOR_TRANSPORT_GOOD;
+ result = usb_stor_bulk_transfer_buf(us,
+ us->recv_bulk_pipe,
+ buffer, 0x24, NULL);
+ if (result != USB_STOR_XFER_GOOD) {
+ result = USB_STOR_XFER_ERROR;
+ goto out;
}
+ result = memcmp(buffer+8, "Option", 6);
+
+ /* Read the CSW */
+ usb_stor_bulk_transfer_buf(us,
+ us->recv_bulk_pipe,
+ buffer, 13, NULL);
+
+out:
+ kfree(buffer);
+ return result;
+}
+
+
+int option_ms_init(struct us_data *us)
+{
+ int result;
+
+ US_DEBUGP("Option MS: option_ms_init called\n");
+
+ /* Additional test for vendor information via INQUIRY,
+ * because some vendor/product IDs are ambiguous
+ */
+ result = option_inquiry(us);
+ if (result != 0) {
+ US_DEBUGP("Option MS: vendor is not Option or not determinable,"
+ " no action taken\n");
+ return 0;
+ } else
+ US_DEBUGP("Option MS: this is a genuine Option device,"
+ " proceeding\n");
+
/* Force Modem mode */
if (option_zero_cd == ZCD_FORCE_MODEM) {
US_DEBUGP("Option MS: %s", "Forcing Modem Mode\n");
- result = option_rezero(us, ep_in, ep_out);
+ result = option_rezero(us);
if (result != USB_STOR_XFER_GOOD)
US_DEBUGP("Option MS: Failed to switch to modem mode.\n");
return -EIO;
@@ -142,6 +160,6 @@ int option_ms_init(struct us_data *us)
" requests it\n");
}
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
index 4359a2cb42d..4395c4100ec 100644
--- a/drivers/usb/storage/sierra_ms.c
+++ b/drivers/usb/storage/sierra_ms.c
@@ -202,6 +202,6 @@ int sierra_ms_init(struct us_data *us)
complete:
result = device_create_file(&us->pusb_intf->dev, &dev_attr_truinst);
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 4b8b69045fe..1b9c5dd0fb2 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1385,7 +1385,7 @@ UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100,
UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000,
"D-Link",
"USB Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0),
+ US_SC_DEVICE, US_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE),
/* Reported by Kevin Lloyd <linux@sierrawireless.com>
* Entry is needed for the initializer function override,
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 9367b6297d8..89cd2deeb4a 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -513,7 +513,7 @@ befs_utf2nls(struct super_block *sb, const char *in,
{
struct nls_table *nls = BEFS_SB(sb)->nls;
int i, o;
- wchar_t uni;
+ unicode_t uni;
int unilen, utflen;
char *result;
/* The utf8->nls conversion won't make the final nls string bigger
@@ -539,16 +539,16 @@ befs_utf2nls(struct super_block *sb, const char *in,
for (i = o = 0; i < in_len; i += utflen, o += unilen) {
/* convert from UTF-8 to Unicode */
- utflen = utf8_mbtowc(&uni, &in[i], in_len - i);
- if (utflen < 0) {
+ utflen = utf8_to_utf32(&in[i], in_len - i, &uni);
+ if (utflen < 0)
goto conv_err;
- }
/* convert from Unicode to nls */
+ if (uni > MAX_WCHAR_T)
+ goto conv_err;
unilen = nls->uni2char(uni, &result[o], in_len - o);
- if (unilen < 0) {
+ if (unilen < 0)
goto conv_err;
- }
}
result[o] = '\0';
*out_len = o;
@@ -619,15 +619,13 @@ befs_nls2utf(struct super_block *sb, const char *in,
/* convert from nls to unicode */
unilen = nls->char2uni(&in[i], in_len - i, &uni);
- if (unilen < 0) {
+ if (unilen < 0)
goto conv_err;
- }
/* convert from unicode to UTF-8 */
- utflen = utf8_wctomb(&result[o], uni, 3);
- if (utflen <= 0) {
+ utflen = utf32_to_utf8(uni, &result[o], 3);
+ if (utflen <= 0)
goto conv_err;
- }
}
result[o] = '\0';
diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index 3b8e71b412f..38ff75a0fe2 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -22,6 +22,19 @@
#include <asm/uaccess.h>
#include "fat.h"
+/*
+ * Maximum buffer size of short name.
+ * [(MSDOS_NAME + '.') * max one char + nul]
+ * For msdos style, ['.' (hidden) + MSDOS_NAME + '.' + nul]
+ */
+#define FAT_MAX_SHORT_SIZE ((MSDOS_NAME + 1) * NLS_MAX_CHARSET_SIZE + 1)
+/*
+ * Maximum buffer size of unicode chars from slots.
+ * [(max longname slots * 13 (size in a slot) + nul) * sizeof(wchar_t)]
+ */
+#define FAT_MAX_UNI_CHARS ((MSDOS_SLOTS - 1) * 13 + 1)
+#define FAT_MAX_UNI_SIZE (FAT_MAX_UNI_CHARS * sizeof(wchar_t))
+
static inline loff_t fat_make_i_pos(struct super_block *sb,
struct buffer_head *bh,
struct msdos_dir_entry *de)
@@ -171,7 +184,8 @@ static inline int fat_uni_to_x8(struct msdos_sb_info *sbi, const wchar_t *uni,
unsigned char *buf, int size)
{
if (sbi->options.utf8)
- return utf8_wcstombs(buf, uni, size);
+ return utf16s_to_utf8s(uni, FAT_MAX_UNI_CHARS,
+ UTF16_HOST_ENDIAN, buf, size);
else
return uni16_to_x8(buf, uni, size, sbi->options.unicode_xlate,
sbi->nls_io);
@@ -325,19 +339,6 @@ parse_long:
}
/*
- * Maximum buffer size of short name.
- * [(MSDOS_NAME + '.') * max one char + nul]
- * For msdos style, ['.' (hidden) + MSDOS_NAME + '.' + nul]
- */
-#define FAT_MAX_SHORT_SIZE ((MSDOS_NAME + 1) * NLS_MAX_CHARSET_SIZE + 1)
-/*
- * Maximum buffer size of unicode chars from slots.
- * [(max longname slots * 13 (size in a slot) + nul) * sizeof(wchar_t)]
- */
-#define FAT_MAX_UNI_CHARS ((MSDOS_SLOTS - 1) * 13 + 1)
-#define FAT_MAX_UNI_SIZE (FAT_MAX_UNI_CHARS * sizeof(wchar_t))
-
-/*
* Return values: negative -> error, 0 -> not found, positive -> found,
* value is the total amount of slots, including the shortname entry.
*/
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index 8d6fdcfd41d..73471b7ecc8 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -502,11 +502,11 @@ xlate_to_uni(const unsigned char *name, int len, unsigned char *outname,
if (utf8) {
int name_len = strlen(name);
- *outlen = utf8_mbstowcs((wchar_t *)outname, name, PATH_MAX);
+ *outlen = utf8s_to_utf16s(name, PATH_MAX, (wchar_t *) outname);
/*
* We stripped '.'s before and set len appropriately,
- * but utf8_mbstowcs doesn't care about len
+ * but utf8s_to_utf16s doesn't care about len
*/
*outlen -= (name_len - len);
diff --git a/fs/isofs/joliet.c b/fs/isofs/joliet.c
index 92c14b850e9..a048de81c09 100644
--- a/fs/isofs/joliet.c
+++ b/fs/isofs/joliet.c
@@ -37,37 +37,6 @@ uni16_to_x8(unsigned char *ascii, __be16 *uni, int len, struct nls_table *nls)
return (op - ascii);
}
-/* Convert big endian wide character string to utf8 */
-static int
-wcsntombs_be(__u8 *s, const __u8 *pwcs, int inlen, int maxlen)
-{
- const __u8 *ip;
- __u8 *op;
- int size;
- __u16 c;
-
- op = s;
- ip = pwcs;
- while ((*ip || ip[1]) && (maxlen > 0) && (inlen > 0)) {
- c = (*ip << 8) | ip[1];
- if (c > 0x7f) {
- size = utf8_wctomb(op, c, maxlen);
- if (size == -1) {
- /* Ignore character and move on */
- maxlen--;
- } else {
- op += size;
- maxlen -= size;
- }
- } else {
- *op++ = (__u8) c;
- }
- ip += 2;
- inlen--;
- }
- return (op - s);
-}
-
int
get_joliet_filename(struct iso_directory_record * de, unsigned char *outname, struct inode * inode)
{
@@ -79,8 +48,9 @@ get_joliet_filename(struct iso_directory_record * de, unsigned char *outname, st
nls = ISOFS_SB(inode->i_sb)->s_nls_iocharset;
if (utf8) {
- len = wcsntombs_be(outname, de->name,
- de->name_len[0] >> 1, PAGE_SIZE);
+ len = utf16s_to_utf8s((const wchar_t *) de->name,
+ de->name_len[0] >> 1, UTF16_BIG_ENDIAN,
+ outname, PAGE_SIZE);
} else {
len = uni16_to_x8(outname, (__be16 *) de->name,
de->name_len[0] >> 1, nls);
diff --git a/fs/ncpfs/ncplib_kernel.c b/fs/ncpfs/ncplib_kernel.c
index 97645f11211..0ec6237a597 100644
--- a/fs/ncpfs/ncplib_kernel.c
+++ b/fs/ncpfs/ncplib_kernel.c
@@ -1113,11 +1113,13 @@ ncp__io2vol(struct ncp_server *server, unsigned char *vname, unsigned int *vlen,
if (NCP_IS_FLAG(server, NCP_FLAG_UTF8)) {
int k;
+ unicode_t u;
- k = utf8_mbtowc(&ec, iname, iname_end - iname);
- if (k < 0)
+ k = utf8_to_utf32(iname, iname_end - iname, &u);
+ if (k < 0 || u > MAX_WCHAR_T)
return -EINVAL;
iname += k;
+ ec = u;
} else {
if (*iname == NCP_ESC) {
int k;
@@ -1214,7 +1216,7 @@ ncp__vol2io(struct ncp_server *server, unsigned char *iname, unsigned int *ilen,
if (NCP_IS_FLAG(server, NCP_FLAG_UTF8)) {
int k;
- k = utf8_wctomb(iname, ec, iname_end - iname);
+ k = utf32_to_utf8(ec, iname, iname_end - iname);
if (k < 0) {
err = -ENAMETOOLONG;
goto quit;
diff --git a/fs/nls/nls_base.c b/fs/nls/nls_base.c
index 9b0efdad891..477d37d83b3 100644
--- a/fs/nls/nls_base.c
+++ b/fs/nls/nls_base.c
@@ -15,6 +15,7 @@
#include <linux/errno.h>
#include <linux/kmod.h>
#include <linux/spinlock.h>
+#include <asm/byteorder.h>
static struct nls_table default_table;
static struct nls_table *tables = &default_table;
@@ -43,10 +44,17 @@ static const struct utf8_table utf8_table[] =
{0, /* end of table */}
};
-int
-utf8_mbtowc(wchar_t *p, const __u8 *s, int n)
+#define UNICODE_MAX 0x0010ffff
+#define PLANE_SIZE 0x00010000
+
+#define SURROGATE_MASK 0xfffff800
+#define SURROGATE_PAIR 0x0000d800
+#define SURROGATE_LOW 0x00000400
+#define SURROGATE_BITS 0x000003ff
+
+int utf8_to_utf32(const u8 *s, int len, unicode_t *pu)
{
- long l;
+ unsigned long l;
int c0, c, nc;
const struct utf8_table *t;
@@ -57,12 +65,13 @@ utf8_mbtowc(wchar_t *p, const __u8 *s, int n)
nc++;
if ((c0 & t->cmask) == t->cval) {
l &= t->lmask;
- if (l < t->lval)
+ if (l < t->lval || l > UNICODE_MAX ||
+ (l & SURROGATE_MASK) == SURROGATE_PAIR)
return -1;
- *p = l;
+ *pu = (unicode_t) l;
return nc;
}
- if (n <= nc)
+ if (len <= nc)
return -1;
s++;
c = (*s ^ 0x80) & 0xFF;
@@ -72,90 +81,133 @@ utf8_mbtowc(wchar_t *p, const __u8 *s, int n)
}
return -1;
}
+EXPORT_SYMBOL(utf8_to_utf32);
-int
-utf8_mbstowcs(wchar_t *pwcs, const __u8 *s, int n)
+int utf32_to_utf8(unicode_t u, u8 *s, int maxlen)
{
- __u16 *op;
- const __u8 *ip;
- int size;
-
- op = pwcs;
- ip = s;
- while (*ip && n > 0) {
- if (*ip & 0x80) {
- size = utf8_mbtowc(op, ip, n);
- if (size == -1) {
- /* Ignore character and move on */
- ip++;
- n--;
- } else {
- op++;
- ip += size;
- n -= size;
- }
- } else {
- *op++ = *ip++;
- n--;
- }
- }
- return (op - pwcs);
-}
-
-int
-utf8_wctomb(__u8 *s, wchar_t wc, int maxlen)
-{
- long l;
+ unsigned long l;
int c, nc;
const struct utf8_table *t;
-
+
if (!s)
return 0;
-
- l = wc;
+
+ l = u;
+ if (l > UNICODE_MAX || (l & SURROGATE_MASK) == SURROGATE_PAIR)
+ return -1;
+
nc = 0;
for (t = utf8_table; t->cmask && maxlen; t++, maxlen--) {
nc++;
if (l <= t->lmask) {
c = t->shift;
- *s = t->cval | (l >> c);
+ *s = (u8) (t->cval | (l >> c));
while (c > 0) {
c -= 6;
s++;
- *s = 0x80 | ((l >> c) & 0x3F);
+ *s = (u8) (0x80 | ((l >> c) & 0x3F));
}
return nc;
}
}
return -1;
}
+EXPORT_SYMBOL(utf32_to_utf8);
-int
-utf8_wcstombs(__u8 *s, const wchar_t *pwcs, int maxlen)
+int utf8s_to_utf16s(const u8 *s, int len, wchar_t *pwcs)
{
- const __u16 *ip;
- __u8 *op;
+ u16 *op;
int size;
+ unicode_t u;
+
+ op = pwcs;
+ while (*s && len > 0) {
+ if (*s & 0x80) {
+ size = utf8_to_utf32(s, len, &u);
+ if (size < 0) {
+ /* Ignore character and move on */
+ size = 1;
+ } else if (u >= PLANE_SIZE) {
+ u -= PLANE_SIZE;
+ *op++ = (wchar_t) (SURROGATE_PAIR |
+ ((u >> 10) & SURROGATE_BITS));
+ *op++ = (wchar_t) (SURROGATE_PAIR |
+ SURROGATE_LOW |
+ (u & SURROGATE_BITS));
+ } else {
+ *op++ = (wchar_t) u;
+ }
+ s += size;
+ len -= size;
+ } else {
+ *op++ = *s++;
+ len--;
+ }
+ }
+ return op - pwcs;
+}
+EXPORT_SYMBOL(utf8s_to_utf16s);
+
+static inline unsigned long get_utf16(unsigned c, enum utf16_endian endian)
+{
+ switch (endian) {
+ default:
+ return c;
+ case UTF16_LITTLE_ENDIAN:
+ return __le16_to_cpu(c);
+ case UTF16_BIG_ENDIAN:
+ return __be16_to_cpu(c);
+ }
+}
+
+int utf16s_to_utf8s(const wchar_t *pwcs, int len, enum utf16_endian endian,
+ u8 *s, int maxlen)
+{
+ u8 *op;
+ int size;
+ unsigned long u, v;
op = s;
- ip = pwcs;
- while (*ip && maxlen > 0) {
- if (*ip > 0x7f) {
- size = utf8_wctomb(op, *ip, maxlen);
+ while (len > 0 && maxlen > 0) {
+ u = get_utf16(*pwcs, endian);
+ if (!u)
+ break;
+ pwcs++;
+ len--;
+ if (u > 0x7f) {
+ if ((u & SURROGATE_MASK) == SURROGATE_PAIR) {
+ if (u & SURROGATE_LOW) {
+ /* Ignore character and move on */
+ continue;
+ }
+ if (len <= 0)
+ break;
+ v = get_utf16(*pwcs, endian);
+ if ((v & SURROGATE_MASK) != SURROGATE_PAIR ||
+ !(v & SURROGATE_LOW)) {
+ /* Ignore character and move on */
+ continue;
+ }
+ u = PLANE_SIZE + ((u & SURROGATE_BITS) << 10)
+ + (v & SURROGATE_BITS);
+ pwcs++;
+ len--;
+ }
+ size = utf32_to_utf8(u, op, maxlen);
if (size == -1) {
/* Ignore character and move on */
- maxlen--;
} else {
op += size;
maxlen -= size;
}
} else {
- *op++ = (__u8) *ip;
+ *op++ = (u8) u;
+ maxlen--;
}
- ip++;
}
- return (op - s);
+ return op - s;
}
+EXPORT_SYMBOL(utf16s_to_utf8s);
int register_nls(struct nls_table * nls)
{
@@ -467,9 +519,5 @@ EXPORT_SYMBOL(unregister_nls);
EXPORT_SYMBOL(unload_nls);
EXPORT_SYMBOL(load_nls);
EXPORT_SYMBOL(load_nls_default);
-EXPORT_SYMBOL(utf8_mbtowc);
-EXPORT_SYMBOL(utf8_mbstowcs);
-EXPORT_SYMBOL(utf8_wctomb);
-EXPORT_SYMBOL(utf8_wcstombs);
MODULE_LICENSE("Dual BSD/GPL");
diff --git a/fs/nls/nls_utf8.c b/fs/nls/nls_utf8.c
index aa2c42fdd97..0d60a44acac 100644
--- a/fs/nls/nls_utf8.c
+++ b/fs/nls/nls_utf8.c
@@ -15,7 +15,11 @@ static int uni2char(wchar_t uni, unsigned char *out, int boundlen)
{
int n;
- if ( (n = utf8_wctomb(out, uni, boundlen)) == -1) {
+ if (boundlen <= 0)
+ return -ENAMETOOLONG;
+
+ n = utf32_to_utf8(uni, out, boundlen);
+ if (n < 0) {
*out = '?';
return -EINVAL;
}
@@ -25,11 +29,14 @@ static int uni2char(wchar_t uni, unsigned char *out, int boundlen)
static int char2uni(const unsigned char *rawstring, int boundlen, wchar_t *uni)
{
int n;
+ unicode_t u;
- if ( (n = utf8_mbtowc(uni, rawstring, boundlen)) == -1) {
+ n = utf8_to_utf32(rawstring, boundlen, &u);
+ if (n < 0 || u > MAX_WCHAR_T) {
*uni = 0x003f; /* ? */
- n = -EINVAL;
+ return -EINVAL;
}
+ *uni = (wchar_t) u;
return n;
}
diff --git a/include/linux/nls.h b/include/linux/nls.h
index 52b1a76c1b4..d47beef08df 100644
--- a/include/linux/nls.h
+++ b/include/linux/nls.h
@@ -3,8 +3,23 @@
#include <linux/init.h>
-/* unicode character */
-typedef __u16 wchar_t;
+/* Unicode has changed over the years. Unicode code points no longer
+ * fit into 16 bits; as of Unicode 5 valid code points range from 0
+ * to 0x10ffff (17 planes, where each plane holds 65536 code points).
+ *
+ * The original decision to represent Unicode characters as 16-bit
+ * wchar_t values is now outdated. But plane 0 still includes the
+ * most commonly used characters, so we will retain it. The newer
+ * 32-bit unicode_t type can be used when it is necessary to
+ * represent the full Unicode character set.
+ */
+
+/* Plane-0 Unicode character */
+typedef u16 wchar_t;
+#define MAX_WCHAR_T 0xffff
+
+/* Arbitrary Unicode character */
+typedef u32 unicode_t;
struct nls_table {
const char *charset;
@@ -21,6 +36,13 @@ struct nls_table {
/* this value hold the maximum octet of charset */
#define NLS_MAX_CHARSET_SIZE 6 /* for UTF-8 */
+/* Byte order for UTF-16 strings */
+enum utf16_endian {
+ UTF16_HOST_ENDIAN,
+ UTF16_LITTLE_ENDIAN,
+ UTF16_BIG_ENDIAN
+};
+
/* nls.c */
extern int register_nls(struct nls_table *);
extern int unregister_nls(struct nls_table *);
@@ -28,10 +50,11 @@ extern struct nls_table *load_nls(char *);
extern void unload_nls(struct nls_table *);
extern struct nls_table *load_nls_default(void);
-extern int utf8_mbtowc(wchar_t *, const __u8 *, int);
-extern int utf8_mbstowcs(wchar_t *, const __u8 *, int);
-extern int utf8_wctomb(__u8 *, wchar_t, int);
-extern int utf8_wcstombs(__u8 *, const wchar_t *, int);
+extern int utf8_to_utf32(const u8 *s, int len, unicode_t *pu);
+extern int utf32_to_utf8(unicode_t u, u8 *s, int maxlen);
+extern int utf8s_to_utf16s(const u8 *s, int len, wchar_t *pwcs);
+extern int utf16s_to_utf8s(const wchar_t *pwcs, int len,
+ enum utf16_endian endian, u8 *s, int maxlen);
static inline unsigned char nls_tolower(struct nls_table *t, unsigned char c)
{
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 72698d89e76..8e366bb0705 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -124,6 +124,14 @@ typedef int __bitwise pci_power_t;
#define PCI_UNKNOWN ((pci_power_t __force) 5)
#define PCI_POWER_ERROR ((pci_power_t __force) -1)
+/* Remember to update this when the list above changes! */
+extern const char *pci_power_names[];
+
+static inline const char *pci_power_name(pci_power_t state)
+{
+ return pci_power_names[1 + (int) state];
+}
+
#define PCI_PM_D2_DELAY 200
#define PCI_PM_D3_WAIT 10
#define PCI_PM_BUS_WAIT 50
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index aa01d38c997..a3b00036579 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -104,6 +104,7 @@
#define PCI_CLASS_SERIAL_USB_UHCI 0x0c0300
#define PCI_CLASS_SERIAL_USB_OHCI 0x0c0310
#define PCI_CLASS_SERIAL_USB_EHCI 0x0c0320
+#define PCI_CLASS_SERIAL_USB_XHCI 0x0c0330
#define PCI_CLASS_SERIAL_FIBER 0x0c04
#define PCI_CLASS_SERIAL_SMBUS 0x0c05
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 34cdfcac455..84929e91403 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -36,6 +36,7 @@ struct wusb_dev;
* - configs have one (often) or more interfaces;
* - interfaces have one (usually) or more settings;
* - each interface setting has zero or (usually) more endpoints.
+ * - a SuperSpeed endpoint has a companion descriptor
*
* And there might be other descriptors mixed in with those.
*
@@ -44,6 +45,19 @@ struct wusb_dev;
struct ep_device;
+/* For SS devices */
+/**
+ * struct usb_host_ss_ep_comp - Valid for SuperSpeed devices only
+ * @desc: endpoint companion descriptor, wMaxPacketSize in native byteorder
+ * @extra: descriptors following this endpoint companion descriptor
+ * @extralen: how many bytes of "extra" are valid
+ */
+struct usb_host_ss_ep_comp {
+ struct usb_ss_ep_comp_descriptor desc;
+ unsigned char *extra; /* Extra descriptors */
+ int extralen;
+};
+
/**
* struct usb_host_endpoint - host-side endpoint descriptor and queue
* @desc: descriptor for this endpoint, wMaxPacketSize in native byteorder
@@ -51,6 +65,7 @@ struct ep_device;
* @hcpriv: for use by HCD; typically holds hardware dma queue head (QH)
* with one or more transfer descriptors (TDs) per urb
* @ep_dev: ep_device for sysfs info
+ * @ss_ep_comp: companion descriptor information for this endpoint
* @extra: descriptors following this endpoint in the configuration
* @extralen: how many bytes of "extra" are valid
* @enabled: URBs may be submitted to this endpoint
@@ -63,6 +78,7 @@ struct usb_host_endpoint {
struct list_head urb_list;
void *hcpriv;
struct ep_device *ep_dev; /* For sysfs info */
+ struct usb_host_ss_ep_comp *ss_ep_comp; /* For SS devices */
unsigned char *extra; /* Extra descriptors */
int extralen;
@@ -336,7 +352,6 @@ struct usb_bus {
#ifdef CONFIG_USB_DEVICEFS
struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */
#endif
- struct device *dev; /* device for this bus */
#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
struct mon_bus *mon_bus; /* non-null when associated */
@@ -363,6 +378,7 @@ struct usb_tt;
* struct usb_device - kernel's representation of a USB device
* @devnum: device number; address on a USB bus
* @devpath: device ID string for use in messages (e.g., /port/...)
+ * @route: tree topology hex string for use with xHCI
* @state: device state: configured, not attached, etc.
* @speed: device speed: high/full/low (or error)
* @tt: Transaction Translator info; used with low/full speed dev, highspeed hub
@@ -420,6 +436,7 @@ struct usb_tt;
* @skip_sys_resume: skip the next system resume
* @wusb_dev: if this is a Wireless USB device, link to the WUSB
* specific data for the device.
+ * @slot_id: Slot ID assigned by xHCI
*
* Notes:
* Usbcore drivers should not set usbdev->state directly. Instead use
@@ -428,6 +445,7 @@ struct usb_tt;
struct usb_device {
int devnum;
char devpath [16];
+ u32 route;
enum usb_device_state state;
enum usb_device_speed speed;
@@ -503,6 +521,7 @@ struct usb_device {
unsigned skip_sys_resume:1;
#endif
struct wusb_dev *wusb_dev;
+ int slot_id;
};
#define to_usb_device(d) container_of(d, struct usb_device, dev)
@@ -1044,7 +1063,9 @@ typedef void (*usb_complete_t)(struct urb *);
* @setup_dma: For control transfers with URB_NO_SETUP_DMA_MAP set, the
* device driver has provided this DMA address for the setup packet.
* The host controller driver should use this in preference to
- * setup_packet.
+ * setup_packet, but the HCD may chose to ignore the address if it must
+ * copy the setup packet into internal structures. Therefore, setup_packet
+ * must always point to a valid buffer.
* @start_frame: Returns the initial frame for isochronous transfers.
* @number_of_packets: Lists the number of ISO transfer buffers.
* @interval: Specifies the polling interval for interrupt or isochronous
@@ -1180,6 +1201,8 @@ struct urb {
unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/
void *transfer_buffer; /* (in) associated data buffer */
dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */
+ struct usb_sg_request *sg; /* (in) scatter gather buffer list */
+ int num_sgs; /* (in) number of entries in the sg list */
u32 transfer_buffer_length; /* (in) data buffer length */
u32 actual_length; /* (return) actual transfer length */
unsigned char *setup_packet; /* (in) setup packet (control only) */
@@ -1425,8 +1448,8 @@ struct usb_sg_request {
int status;
size_t bytes;
- /*
- * members below are private: to usbcore,
+ /* private:
+ * members below are private to usbcore,
* and are not provided for driver access!
*/
spinlock_t lock;
@@ -1561,6 +1584,9 @@ extern void usb_unregister_notify(struct notifier_block *nb);
#define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \
format "\n" , ## arg)
+/* debugfs stuff */
+extern struct dentry *usb_debug_root;
+
#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index 8cb025fef63..b5744bc218a 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -24,10 +24,75 @@
#define USB_SUBCLASS_AUDIOCONTROL 0x01
#define USB_SUBCLASS_AUDIOSTREAMING 0x02
#define USB_SUBCLASS_MIDISTREAMING 0x03
+#define USB_SUBCLASS_VENDOR_SPEC 0xff
+/* A.5 Audio Class-Specific AC interface Descriptor Subtypes*/
+#define HEADER 0x01
+#define INPUT_TERMINAL 0x02
+#define OUTPUT_TERMINAL 0x03
+#define MIXER_UNIT 0x04
+#define SELECTOR_UNIT 0x05
+#define FEATURE_UNIT 0x06
+#define PROCESSING_UNIT 0x07
+#define EXTENSION_UNIT 0x08
+
+#define AS_GENERAL 0x01
+#define FORMAT_TYPE 0x02
+#define FORMAT_SPECIFIC 0x03
+
+#define EP_GENERAL 0x01
+
+#define MS_GENERAL 0x01
+#define MIDI_IN_JACK 0x02
+#define MIDI_OUT_JACK 0x03
+
+/* endpoint attributes */
+#define EP_ATTR_MASK 0x0c
+#define EP_ATTR_ASYNC 0x04
+#define EP_ATTR_ADAPTIVE 0x08
+#define EP_ATTR_SYNC 0x0c
+
+/* cs endpoint attributes */
+#define EP_CS_ATTR_SAMPLE_RATE 0x01
+#define EP_CS_ATTR_PITCH_CONTROL 0x02
+#define EP_CS_ATTR_FILL_MAX 0x80
+
+/* Audio Class specific Request Codes */
+#define USB_AUDIO_SET_INTF 0x21
+#define USB_AUDIO_SET_ENDPOINT 0x22
+#define USB_AUDIO_GET_INTF 0xa1
+#define USB_AUDIO_GET_ENDPOINT 0xa2
+
+#define SET_ 0x00
+#define GET_ 0x80
+
+#define _CUR 0x1
+#define _MIN 0x2
+#define _MAX 0x3
+#define _RES 0x4
+#define _MEM 0x5
+
+#define SET_CUR (SET_ | _CUR)
+#define GET_CUR (GET_ | _CUR)
+#define SET_MIN (SET_ | _MIN)
+#define GET_MIN (GET_ | _MIN)
+#define SET_MAX (SET_ | _MAX)
+#define GET_MAX (GET_ | _MAX)
+#define SET_RES (SET_ | _RES)
+#define GET_RES (GET_ | _RES)
+#define SET_MEM (SET_ | _MEM)
+#define GET_MEM (GET_ | _MEM)
+
+#define GET_STAT 0xff
+
+#define USB_AC_TERMINAL_UNDEFINED 0x100
+#define USB_AC_TERMINAL_STREAMING 0x101
+#define USB_AC_TERMINAL_VENDOR_SPEC 0x1FF
+
+/* Terminal Control Selectors */
/* 4.3.2 Class-Specific AC Interface Descriptor */
struct usb_ac_header_descriptor {
- __u8 bLength; /* 8+n */
+ __u8 bLength; /* 8 + n */
__u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
__u8 bDescriptorSubtype; /* USB_MS_HEADER */
__le16 bcdADC; /* 0x0100 */
@@ -36,7 +101,7 @@ struct usb_ac_header_descriptor {
__u8 baInterfaceNr[]; /* [n] */
} __attribute__ ((packed));
-#define USB_DT_AC_HEADER_SIZE(n) (8+(n))
+#define USB_DT_AC_HEADER_SIZE(n) (8 + (n))
/* As above, but more useful for defining your own descriptors: */
#define DECLARE_USB_AC_HEADER_DESCRIPTOR(n) \
@@ -50,4 +115,200 @@ struct usb_ac_header_descriptor_##n { \
__u8 baInterfaceNr[n]; \
} __attribute__ ((packed))
+/* 4.3.2.1 Input Terminal Descriptor */
+struct usb_input_terminal_descriptor {
+ __u8 bLength; /* in bytes: 12 */
+ __u8 bDescriptorType; /* CS_INTERFACE descriptor type */
+ __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */
+ __u8 bTerminalID; /* Constant uniquely terminal ID */
+ __le16 wTerminalType; /* USB Audio Terminal Types */
+ __u8 bAssocTerminal; /* ID of the Output Terminal associated */
+ __u8 bNrChannels; /* Number of logical output channels */
+ __le16 wChannelConfig;
+ __u8 iChannelNames;
+ __u8 iTerminal;
+} __attribute__ ((packed));
+
+#define USB_DT_AC_INPUT_TERMINAL_SIZE 12
+
+#define USB_AC_INPUT_TERMINAL_UNDEFINED 0x200
+#define USB_AC_INPUT_TERMINAL_MICROPHONE 0x201
+#define USB_AC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202
+#define USB_AC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203
+#define USB_AC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204
+#define USB_AC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205
+#define USB_AC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206
+
+/* 4.3.2.2 Output Terminal Descriptor */
+struct usb_output_terminal_descriptor {
+ __u8 bLength; /* in bytes: 9 */
+ __u8 bDescriptorType; /* CS_INTERFACE descriptor type */
+ __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */
+ __u8 bTerminalID; /* Constant uniquely terminal ID */
+ __le16 wTerminalType; /* USB Audio Terminal Types */
+ __u8 bAssocTerminal; /* ID of the Input Terminal associated */
+ __u8 bSourceID; /* ID of the connected Unit or Terminal*/
+ __u8 iTerminal;
+} __attribute__ ((packed));
+
+#define USB_DT_AC_OUTPUT_TERMINAL_SIZE 9
+
+#define USB_AC_OUTPUT_TERMINAL_UNDEFINED 0x300
+#define USB_AC_OUTPUT_TERMINAL_SPEAKER 0x301
+#define USB_AC_OUTPUT_TERMINAL_HEADPHONES 0x302
+#define USB_AC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303
+#define USB_AC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304
+#define USB_AC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305
+#define USB_AC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306
+#define USB_AC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307
+
+/* Set bControlSize = 2 as default setting */
+#define USB_DT_AC_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2)
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_USB_AC_FEATURE_UNIT_DESCRIPTOR(ch) \
+struct usb_ac_feature_unit_descriptor_##ch { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __u8 bUnitID; \
+ __u8 bSourceID; \
+ __u8 bControlSize; \
+ __le16 bmaControls[ch + 1]; \
+ __u8 iFeature; \
+} __attribute__ ((packed))
+
+/* 4.5.2 Class-Specific AS Interface Descriptor */
+struct usb_as_header_descriptor {
+ __u8 bLength; /* in bytes: 7 */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* AS_GENERAL */
+ __u8 bTerminalLink; /* Terminal ID of connected Terminal */
+ __u8 bDelay; /* Delay introduced by the data path */
+ __le16 wFormatTag; /* The Audio Data Format */
+} __attribute__ ((packed));
+
+#define USB_DT_AS_HEADER_SIZE 7
+
+#define USB_AS_AUDIO_FORMAT_TYPE_I_UNDEFINED 0x0
+#define USB_AS_AUDIO_FORMAT_TYPE_I_PCM 0x1
+#define USB_AS_AUDIO_FORMAT_TYPE_I_PCM8 0x2
+#define USB_AS_AUDIO_FORMAT_TYPE_I_IEEE_FLOAT 0x3
+#define USB_AS_AUDIO_FORMAT_TYPE_I_ALAW 0x4
+#define USB_AS_AUDIO_FORMAT_TYPE_I_MULAW 0x5
+
+struct usb_as_format_type_i_continuous_descriptor {
+ __u8 bLength; /* in bytes: 8 + (ns * 3) */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* FORMAT_TYPE */
+ __u8 bFormatType; /* FORMAT_TYPE_1 */
+ __u8 bNrChannels; /* physical channels in the stream */
+ __u8 bSubframeSize; /* */
+ __u8 bBitResolution;
+ __u8 bSamFreqType;
+ __u8 tLowerSamFreq[3];
+ __u8 tUpperSamFreq[3];
+} __attribute__ ((packed));
+
+#define USB_AS_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14
+
+struct usb_as_formate_type_i_discrete_descriptor {
+ __u8 bLength; /* in bytes: 8 + (ns * 3) */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* FORMAT_TYPE */
+ __u8 bFormatType; /* FORMAT_TYPE_1 */
+ __u8 bNrChannels; /* physical channels in the stream */
+ __u8 bSubframeSize; /* */
+ __u8 bBitResolution;
+ __u8 bSamFreqType;
+ __u8 tSamFreq[][3];
+} __attribute__ ((packed));
+
+#define DECLARE_USB_AS_FORMAT_TYPE_I_DISCRETE_DESC(n) \
+struct usb_as_formate_type_i_discrete_descriptor_##n { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __u8 bFormatType; \
+ __u8 bNrChannels; \
+ __u8 bSubframeSize; \
+ __u8 bBitResolution; \
+ __u8 bSamFreqType; \
+ __u8 tSamFreq[n][3]; \
+} __attribute__ ((packed))
+
+#define USB_AS_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3))
+
+#define USB_AS_FORMAT_TYPE_UNDEFINED 0x0
+#define USB_AS_FORMAT_TYPE_I 0x1
+#define USB_AS_FORMAT_TYPE_II 0x2
+#define USB_AS_FORMAT_TYPE_III 0x3
+
+#define USB_AS_ENDPOINT_ASYNC (1 << 2)
+#define USB_AS_ENDPOINT_ADAPTIVE (2 << 2)
+#define USB_AS_ENDPOINT_SYNC (3 << 2)
+
+struct usb_as_iso_endpoint_descriptor {
+ __u8 bLength; /* in bytes: 7 */
+ __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */
+ __u8 bDescriptorSubtype; /* EP_GENERAL */
+ __u8 bmAttributes;
+ __u8 bLockDelayUnits;
+ __le16 wLockDelay;
+};
+#define USB_AS_ISO_ENDPOINT_DESC_SIZE 7
+
+#define FU_CONTROL_UNDEFINED 0x00
+#define MUTE_CONTROL 0x01
+#define VOLUME_CONTROL 0x02
+#define BASS_CONTROL 0x03
+#define MID_CONTROL 0x04
+#define TREBLE_CONTROL 0x05
+#define GRAPHIC_EQUALIZER_CONTROL 0x06
+#define AUTOMATIC_GAIN_CONTROL 0x07
+#define DELAY_CONTROL 0x08
+#define BASS_BOOST_CONTROL 0x09
+#define LOUDNESS_CONTROL 0x0a
+
+#define FU_MUTE (1 << (MUTE_CONTROL - 1))
+#define FU_VOLUME (1 << (VOLUME_CONTROL - 1))
+#define FU_BASS (1 << (BASS_CONTROL - 1))
+#define FU_MID (1 << (MID_CONTROL - 1))
+#define FU_TREBLE (1 << (TREBLE_CONTROL - 1))
+#define FU_GRAPHIC_EQ (1 << (GRAPHIC_EQUALIZER_CONTROL - 1))
+#define FU_AUTO_GAIN (1 << (AUTOMATIC_GAIN_CONTROL - 1))
+#define FU_DELAY (1 << (DELAY_CONTROL - 1))
+#define FU_BASS_BOOST (1 << (BASS_BOOST_CONTROL - 1))
+#define FU_LOUDNESS (1 << (LOUDNESS_CONTROL - 1))
+
+struct usb_audio_control {
+ struct list_head list;
+ const char *name;
+ u8 type;
+ int data[5];
+ int (*set)(struct usb_audio_control *con, u8 cmd, int value);
+ int (*get)(struct usb_audio_control *con, u8 cmd);
+};
+
+static inline int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value)
+{
+ con->data[cmd] = value;
+
+ return 0;
+}
+
+static inline int generic_get_cmd(struct usb_audio_control *con, u8 cmd)
+{
+ return con->data[cmd];
+}
+
+struct usb_audio_control_selector {
+ struct list_head list;
+ struct list_head control;
+ u8 id;
+ const char *name;
+ u8 type;
+ struct usb_descriptor_header *desc;
+};
+
#endif /* __LINUX_USB_AUDIO_H */
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index b145119a90d..93223638f70 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -191,6 +191,8 @@ struct usb_ctrlrequest {
#define USB_DT_WIRE_ADAPTER 0x21
#define USB_DT_RPIPE 0x22
#define USB_DT_CS_RADIO_CONTROL 0x23
+/* From the USB 3.0 spec */
+#define USB_DT_SS_ENDPOINT_COMP 0x30
/* Conventional codes for class-specific descriptors. The convention is
* defined in the USB "Common Class" Spec (3.11). Individual class specs
@@ -535,6 +537,20 @@ static inline int usb_endpoint_is_isoc_out(
/*-------------------------------------------------------------------------*/
+/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
+struct usb_ss_ep_comp_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bMaxBurst;
+ __u8 bmAttributes;
+ __u16 wBytesPerInterval;
+} __attribute__ ((packed));
+
+#define USB_DT_SS_EP_COMP_SIZE 6
+
+/*-------------------------------------------------------------------------*/
+
/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
struct usb_qualifier_descriptor {
__u8 bLength;
@@ -752,6 +768,7 @@ enum usb_device_speed {
USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
USB_SPEED_HIGH, /* usb 2.0 */
USB_SPEED_VARIABLE, /* wireless (usb 2.5) */
+ USB_SPEED_SUPER, /* usb 3.0 */
};
enum usb_device_state {
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index acd7b0f06c8..4f6bb3d2160 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -124,6 +124,7 @@ struct usb_function {
void (*suspend)(struct usb_function *);
void (*resume)(struct usb_function *);
+ /* private: */
/* internals */
struct list_head list;
};
@@ -219,6 +220,7 @@ struct usb_configuration {
struct usb_composite_dev *cdev;
+ /* private: */
/* internals */
struct list_head list;
struct list_head functions;
@@ -321,6 +323,7 @@ struct usb_composite_dev {
struct usb_configuration *config;
+ /* private: */
/* internals */
struct usb_device_descriptor desc;
struct list_head configs;
diff --git a/include/linux/usb/langwell_otg.h b/include/linux/usb/langwell_otg.h
new file mode 100644
index 00000000000..e115ae6df1d
--- /dev/null
+++ b/include/linux/usb/langwell_otg.h
@@ -0,0 +1,177 @@
+/*
+ * Intel Langwell USB OTG transceiver driver
+ * Copyright (C) 2008, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __LANGWELL_OTG_H__
+#define __LANGWELL_OTG_H__
+
+/* notify transceiver driver about OTG events */
+extern void langwell_update_transceiver(void);
+/* HCD register bus driver */
+extern int langwell_register_host(struct pci_driver *host_driver);
+/* HCD unregister bus driver */
+extern void langwell_unregister_host(struct pci_driver *host_driver);
+/* DCD register bus driver */
+extern int langwell_register_peripheral(struct pci_driver *client_driver);
+/* DCD unregister bus driver */
+extern void langwell_unregister_peripheral(struct pci_driver *client_driver);
+/* No silent failure, output warning message */
+extern void langwell_otg_nsf_msg(unsigned long message);
+
+#define CI_USBCMD 0x30
+# define USBCMD_RST BIT(1)
+# define USBCMD_RS BIT(0)
+#define CI_USBSTS 0x34
+# define USBSTS_SLI BIT(8)
+# define USBSTS_URI BIT(6)
+# define USBSTS_PCI BIT(2)
+#define CI_PORTSC1 0x74
+# define PORTSC_PP BIT(12)
+# define PORTSC_LS (BIT(11) | BIT(10))
+# define PORTSC_SUSP BIT(7)
+# define PORTSC_CCS BIT(0)
+#define CI_HOSTPC1 0xb4
+# define HOSTPC1_PHCD BIT(22)
+#define CI_OTGSC 0xf4
+# define OTGSC_DPIE BIT(30)
+# define OTGSC_1MSE BIT(29)
+# define OTGSC_BSEIE BIT(28)
+# define OTGSC_BSVIE BIT(27)
+# define OTGSC_ASVIE BIT(26)
+# define OTGSC_AVVIE BIT(25)
+# define OTGSC_IDIE BIT(24)
+# define OTGSC_DPIS BIT(22)
+# define OTGSC_1MSS BIT(21)
+# define OTGSC_BSEIS BIT(20)
+# define OTGSC_BSVIS BIT(19)
+# define OTGSC_ASVIS BIT(18)
+# define OTGSC_AVVIS BIT(17)
+# define OTGSC_IDIS BIT(16)
+# define OTGSC_DPS BIT(14)
+# define OTGSC_1MST BIT(13)
+# define OTGSC_BSE BIT(12)
+# define OTGSC_BSV BIT(11)
+# define OTGSC_ASV BIT(10)
+# define OTGSC_AVV BIT(9)
+# define OTGSC_ID BIT(8)
+# define OTGSC_HABA BIT(7)
+# define OTGSC_HADP BIT(6)
+# define OTGSC_IDPU BIT(5)
+# define OTGSC_DP BIT(4)
+# define OTGSC_OT BIT(3)
+# define OTGSC_HAAR BIT(2)
+# define OTGSC_VC BIT(1)
+# define OTGSC_VD BIT(0)
+# define OTGSC_INTEN_MASK (0x7f << 24)
+# define OTGSC_INTSTS_MASK (0x7f << 16)
+#define CI_USBMODE 0xf8
+# define USBMODE_CM (BIT(1) | BIT(0))
+# define USBMODE_IDLE 0
+# define USBMODE_DEVICE 0x2
+# define USBMODE_HOST 0x3
+
+#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI)
+
+struct otg_hsm {
+ /* Input */
+ int a_bus_resume;
+ int a_bus_suspend;
+ int a_conn;
+ int a_sess_vld;
+ int a_srp_det;
+ int a_vbus_vld;
+ int b_bus_resume;
+ int b_bus_suspend;
+ int b_conn;
+ int b_se0_srp;
+ int b_sess_end;
+ int b_sess_vld;
+ int id;
+
+ /* Internal variables */
+ int a_set_b_hnp_en;
+ int b_srp_done;
+ int b_hnp_enable;
+
+ /* Timeout indicator for timers */
+ int a_wait_vrise_tmout;
+ int a_wait_bcon_tmout;
+ int a_aidl_bdis_tmout;
+ int b_ase0_brst_tmout;
+ int b_bus_suspend_tmout;
+ int b_srp_res_tmout;
+
+ /* Informative variables */
+ int a_bus_drop;
+ int a_bus_req;
+ int a_clr_err;
+ int a_suspend_req;
+ int b_bus_req;
+
+ /* Output */
+ int drv_vbus;
+ int loc_conn;
+ int loc_sof;
+
+ /* Others */
+ int b_bus_suspend_vld;
+};
+
+#define TA_WAIT_VRISE 100
+#define TA_WAIT_BCON 30000
+#define TA_AIDL_BDIS 15000
+#define TB_ASE0_BRST 5000
+#define TB_SE0_SRP 2
+#define TB_SRP_RES 100
+#define TB_BUS_SUSPEND 500
+
+struct langwell_otg_timer {
+ unsigned long expires; /* Number of count increase to timeout */
+ unsigned long count; /* Tick counter */
+ void (*function)(unsigned long); /* Timeout function */
+ unsigned long data; /* Data passed to function */
+ struct list_head list;
+};
+
+struct langwell_otg {
+ struct otg_transceiver otg;
+ struct otg_hsm hsm;
+ void __iomem *regs;
+ unsigned region;
+ struct pci_driver *host_ops;
+ struct pci_driver *client_ops;
+ struct pci_dev *pdev;
+ struct work_struct work;
+ struct workqueue_struct *qwork;
+ spinlock_t lock;
+ spinlock_t wq_lock;
+};
+
+static inline struct langwell_otg *otg_to_langwell(struct otg_transceiver *otg)
+{
+ return container_of(otg, struct langwell_otg, otg);
+}
+
+#ifdef DEBUG
+#define otg_dbg(fmt, args...) \
+ printk(KERN_DEBUG fmt , ## args)
+#else
+#define otg_dbg(fmt, args...) \
+ do { } while (0)
+#endif /* DEBUG */
+#endif /* __LANGWELL_OTG_H__ */
diff --git a/include/linux/usb/langwell_udc.h b/include/linux/usb/langwell_udc.h
new file mode 100644
index 00000000000..c949178a653
--- /dev/null
+++ b/include/linux/usb/langwell_udc.h
@@ -0,0 +1,310 @@
+/*
+ * Intel Langwell USB Device Controller driver
+ * Copyright (C) 2008-2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __LANGWELL_UDC_H
+#define __LANGWELL_UDC_H
+
+
+/* MACRO defines */
+#define CAP_REG_OFFSET 0x0
+#define OP_REG_OFFSET 0x28
+
+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
+
+#define DQH_ALIGNMENT 2048
+#define DTD_ALIGNMENT 64
+#define DMA_BOUNDARY 4096
+
+#define EP0_MAX_PKT_SIZE 64
+#define EP_DIR_IN 1
+#define EP_DIR_OUT 0
+
+#define FLUSH_TIMEOUT 1000
+#define RESET_TIMEOUT 1000
+#define SETUPSTAT_TIMEOUT 100
+#define PRIME_TIMEOUT 100
+
+
+/* device memory space registers */
+
+/* Capability Registers, BAR0 + CAP_REG_OFFSET */
+struct langwell_cap_regs {
+ /* offset: 0x0 */
+ u8 caplength; /* offset of Operational Register */
+ u8 _reserved3;
+ u16 hciversion; /* H: BCD encoding of host version */
+ u32 hcsparams; /* H: host port steering logic capability */
+ u32 hccparams; /* H: host multiple mode control capability */
+#define HCC_LEN BIT(17) /* Link power management (LPM) capability */
+ u8 _reserved4[0x20-0xc];
+ /* offset: 0x20 */
+ u16 dciversion; /* BCD encoding of device version */
+ u8 _reserved5[0x24-0x22];
+ u32 dccparams; /* overall device controller capability */
+#define HOSTCAP BIT(8) /* host capable */
+#define DEVCAP BIT(7) /* device capable */
+#define DEN(d) \
+ (((d)>>0)&0x1f) /* bits 4:0, device endpoint number */
+} __attribute__ ((packed));
+
+
+/* Operational Registers, BAR0 + OP_REG_OFFSET */
+struct langwell_op_regs {
+ /* offset: 0x28 */
+ u32 extsts;
+#define EXTS_TI1 BIT(4) /* general purpose timer interrupt 1 */
+#define EXTS_TI1TI0 BIT(3) /* general purpose timer interrupt 0 */
+#define EXTS_TI1UPI BIT(2) /* USB host periodic interrupt */
+#define EXTS_TI1UAI BIT(1) /* USB host asynchronous interrupt */
+#define EXTS_TI1NAKI BIT(0) /* NAK interrupt */
+ u32 extintr;
+#define EXTI_TIE1 BIT(4) /* general purpose timer interrupt enable 1 */
+#define EXTI_TIE0 BIT(3) /* general purpose timer interrupt enable 0 */
+#define EXTI_UPIE BIT(2) /* USB host periodic interrupt enable */
+#define EXTI_UAIE BIT(1) /* USB host asynchronous interrupt enable */
+#define EXTI_NAKE BIT(0) /* NAK interrupt enable */
+ /* offset: 0x30 */
+ u32 usbcmd;
+#define CMD_HIRD(u) \
+ (((u)>>24)&0xf) /* bits 27:24, host init resume duration */
+#define CMD_ITC(u) \
+ (((u)>>16)&0xff) /* bits 23:16, interrupt threshold control */
+#define CMD_PPE BIT(15) /* per-port change events enable */
+#define CMD_ATDTW BIT(14) /* add dTD tripwire */
+#define CMD_SUTW BIT(13) /* setup tripwire */
+#define CMD_ASPE BIT(11) /* asynchronous schedule park mode enable */
+#define CMD_FS2 BIT(10) /* frame list size */
+#define CMD_ASP1 BIT(9) /* asynchronous schedule park mode count */
+#define CMD_ASP0 BIT(8)
+#define CMD_LR BIT(7) /* light host/device controller reset */
+#define CMD_IAA BIT(6) /* interrupt on async advance doorbell */
+#define CMD_ASE BIT(5) /* asynchronous schedule enable */
+#define CMD_PSE BIT(4) /* periodic schedule enable */
+#define CMD_FS1 BIT(3)
+#define CMD_FS0 BIT(2)
+#define CMD_RST BIT(1) /* controller reset */
+#define CMD_RUNSTOP BIT(0) /* run/stop */
+ u32 usbsts;
+#define STS_PPCI(u) \
+ (((u)>>16)&0xffff) /* bits 31:16, port-n change detect */
+#define STS_AS BIT(15) /* asynchronous schedule status */
+#define STS_PS BIT(14) /* periodic schedule status */
+#define STS_RCL BIT(13) /* reclamation */
+#define STS_HCH BIT(12) /* HC halted */
+#define STS_ULPII BIT(10) /* ULPI interrupt */
+#define STS_SLI BIT(8) /* DC suspend */
+#define STS_SRI BIT(7) /* SOF received */
+#define STS_URI BIT(6) /* USB reset received */
+#define STS_AAI BIT(5) /* interrupt on async advance */
+#define STS_SEI BIT(4) /* system error */
+#define STS_FRI BIT(3) /* frame list rollover */
+#define STS_PCI BIT(2) /* port change detect */
+#define STS_UEI BIT(1) /* USB error interrupt */
+#define STS_UI BIT(0) /* USB interrupt */
+ u32 usbintr;
+/* bits 31:16, per-port interrupt enable */
+#define INTR_PPCE(u) (((u)>>16)&0xffff)
+#define INTR_ULPIE BIT(10) /* ULPI enable */
+#define INTR_SLE BIT(8) /* DC sleep/suspend enable */
+#define INTR_SRE BIT(7) /* SOF received enable */
+#define INTR_URE BIT(6) /* USB reset enable */
+#define INTR_AAE BIT(5) /* interrupt on async advance enable */
+#define INTR_SEE BIT(4) /* system error enable */
+#define INTR_FRE BIT(3) /* frame list rollover enable */
+#define INTR_PCE BIT(2) /* port change detect enable */
+#define INTR_UEE BIT(1) /* USB error interrupt enable */
+#define INTR_UE BIT(0) /* USB interrupt enable */
+ u32 frindex; /* frame index */
+#define FRINDEX_MASK (0x3fff << 0)
+ u32 ctrldssegment; /* not used */
+ u32 deviceaddr;
+#define USBADR_SHIFT 25
+#define USBADR(d) \
+ (((d)>>25)&0x7f) /* bits 31:25, device address */
+#define USBADR_MASK (0x7f << 25)
+#define USBADRA BIT(24) /* device address advance */
+ u32 endpointlistaddr;/* endpoint list top memory address */
+/* bits 31:11, endpoint list pointer */
+#define EPBASE(d) (((d)>>11)&0x1fffff)
+#define ENDPOINTLISTADDR_MASK (0x1fffff << 11)
+ u32 ttctrl; /* H: TT operatin, not used */
+ /* offset: 0x50 */
+ u32 burstsize; /* burst size of data movement */
+#define TXPBURST(b) \
+ (((b)>>8)&0xff) /* bits 15:8, TX burst length */
+#define RXPBURST(b) \
+ (((b)>>0)&0xff) /* bits 7:0, RX burst length */
+ u32 txfilltuning; /* TX tuning */
+ u32 txttfilltuning; /* H: TX TT tuning */
+ u32 ic_usb; /* control the IC_USB FS/LS transceiver */
+ /* offset: 0x60 */
+ u32 ulpi_viewport; /* indirect access to ULPI PHY */
+#define ULPIWU BIT(31) /* ULPI wakeup */
+#define ULPIRUN BIT(30) /* ULPI read/write run */
+#define ULPIRW BIT(29) /* ULPI read/write control */
+#define ULPISS BIT(27) /* ULPI sync state */
+#define ULPIPORT(u) \
+ (((u)>>24)&7) /* bits 26:24, ULPI port number */
+#define ULPIADDR(u) \
+ (((u)>>16)&0xff) /* bits 23:16, ULPI data address */
+#define ULPIDATRD(u) \
+ (((u)>>8)&0xff) /* bits 15:8, ULPI data read */
+#define ULPIDATWR(u) \
+ (((u)>>0)&0xff) /* bits 7:0, ULPI date write */
+ u8 _reserved6[0x70-0x64];
+ /* offset: 0x70 */
+ u32 configflag; /* H: not used */
+ u32 portsc1; /* port status */
+#define DA(p) \
+ (((p)>>25)&0x7f) /* bits 31:25, device address */
+#define PORTS_SSTS (BIT(24) | BIT(23)) /* suspend status */
+#define PORTS_WKOC BIT(22) /* wake on over-current enable */
+#define PORTS_WKDS BIT(21) /* wake on disconnect enable */
+#define PORTS_WKCN BIT(20) /* wake on connect enable */
+#define PORTS_PTC(p) (((p)>>16)&0xf) /* bits 19:16, port test control */
+#define PORTS_PIC (BIT(15) | BIT(14)) /* port indicator control */
+#define PORTS_PO BIT(13) /* port owner */
+#define PORTS_PP BIT(12) /* port power */
+#define PORTS_LS (BIT(11) | BIT(10)) /* line status */
+#define PORTS_SLP BIT(9) /* suspend using L1 */
+#define PORTS_PR BIT(8) /* port reset */
+#define PORTS_SUSP BIT(7) /* suspend */
+#define PORTS_FPR BIT(6) /* force port resume */
+#define PORTS_OCC BIT(5) /* over-current change */
+#define PORTS_OCA BIT(4) /* over-current active */
+#define PORTS_PEC BIT(3) /* port enable/disable change */
+#define PORTS_PE BIT(2) /* port enable/disable */
+#define PORTS_CSC BIT(1) /* connect status change */
+#define PORTS_CCS BIT(0) /* current connect status */
+ u8 _reserved7[0xb4-0x78];
+ /* offset: 0xb4 */
+ u32 devlc; /* control LPM and each USB port behavior */
+/* bits 31:29, parallel transceiver select */
+#define LPM_PTS(d) (((d)>>29)&7)
+#define LPM_STS BIT(28) /* serial transceiver select */
+#define LPM_PTW BIT(27) /* parallel transceiver width */
+#define LPM_PSPD(d) (((d)>>25)&3) /* bits 26:25, port speed */
+#define LPM_PSPD_MASK (BIT(26) | BIT(25))
+#define LPM_SPEED_FULL 0
+#define LPM_SPEED_LOW 1
+#define LPM_SPEED_HIGH 2
+#define LPM_SRT BIT(24) /* shorten reset time */
+#define LPM_PFSC BIT(23) /* port force full speed connect */
+#define LPM_PHCD BIT(22) /* PHY low power suspend clock disable */
+#define LPM_STL BIT(16) /* STALL reply to LPM token */
+#define LPM_BA(d) \
+ (((d)>>1)&0x7ff) /* bits 11:1, BmAttributes */
+#define LPM_NYT_ACK BIT(0) /* NYET/ACK reply to LPM token */
+ u8 _reserved8[0xf4-0xb8];
+ /* offset: 0xf4 */
+ u32 otgsc; /* On-The-Go status and control */
+#define OTGSC_DPIE BIT(30) /* data pulse interrupt enable */
+#define OTGSC_MSE BIT(29) /* 1 ms timer interrupt enable */
+#define OTGSC_BSEIE BIT(28) /* B session end interrupt enable */
+#define OTGSC_BSVIE BIT(27) /* B session valid interrupt enable */
+#define OTGSC_ASVIE BIT(26) /* A session valid interrupt enable */
+#define OTGSC_AVVIE BIT(25) /* A VBUS valid interrupt enable */
+#define OTGSC_IDIE BIT(24) /* USB ID interrupt enable */
+#define OTGSC_DPIS BIT(22) /* data pulse interrupt status */
+#define OTGSC_MSS BIT(21) /* 1 ms timer interrupt status */
+#define OTGSC_BSEIS BIT(20) /* B session end interrupt status */
+#define OTGSC_BSVIS BIT(19) /* B session valid interrupt status */
+#define OTGSC_ASVIS BIT(18) /* A session valid interrupt status */
+#define OTGSC_AVVIS BIT(17) /* A VBUS valid interrupt status */
+#define OTGSC_IDIS BIT(16) /* USB ID interrupt status */
+#define OTGSC_DPS BIT(14) /* data bus pulsing status */
+#define OTGSC_MST BIT(13) /* 1 ms timer toggle */
+#define OTGSC_BSE BIT(12) /* B session end */
+#define OTGSC_BSV BIT(11) /* B session valid */
+#define OTGSC_ASV BIT(10) /* A session valid */
+#define OTGSC_AVV BIT(9) /* A VBUS valid */
+#define OTGSC_USBID BIT(8) /* USB ID */
+#define OTGSC_HABA BIT(7) /* hw assist B-disconnect to A-connect */
+#define OTGSC_HADP BIT(6) /* hw assist data pulse */
+#define OTGSC_IDPU BIT(5) /* ID pullup */
+#define OTGSC_DP BIT(4) /* data pulsing */
+#define OTGSC_OT BIT(3) /* OTG termination */
+#define OTGSC_HAAR BIT(2) /* hw assist auto reset */
+#define OTGSC_VC BIT(1) /* VBUS charge */
+#define OTGSC_VD BIT(0) /* VBUS discharge */
+ u32 usbmode;
+#define MODE_VBPS BIT(5) /* R/W VBUS power select */
+#define MODE_SDIS BIT(4) /* R/W stream disable mode */
+#define MODE_SLOM BIT(3) /* R/W setup lockout mode */
+#define MODE_ENSE BIT(2) /* endian select */
+#define MODE_CM(u) (((u)>>0)&3) /* bits 1:0, controller mode */
+#define MODE_IDLE 0
+#define MODE_DEVICE 2
+#define MODE_HOST 3
+ u8 _reserved9[0x100-0xfc];
+ /* offset: 0x100 */
+ u32 endptnak;
+#define EPTN(e) \
+ (((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK */
+#define EPRN(e) \
+ (((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK */
+ u32 endptnaken;
+#define EPTNE(e) \
+ (((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK enable */
+#define EPRNE(e) \
+ (((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK enable */
+ u32 endptsetupstat;
+#define SETUPSTAT_MASK (0xffff << 0) /* bits 15:0 */
+#define EP0SETUPSTAT_MASK 1
+ u32 endptprime;
+/* bits 31:16, prime endpoint transmit buffer */
+#define PETB(e) (((e)>>16)&0xffff)
+/* bits 15:0, prime endpoint receive buffer */
+#define PERB(e) (((e)>>0)&0xffff)
+ /* offset: 0x110 */
+ u32 endptflush;
+/* bits 31:16, flush endpoint transmit buffer */
+#define FETB(e) (((e)>>16)&0xffff)
+/* bits 15:0, flush endpoint receive buffer */
+#define FERB(e) (((e)>>0)&0xffff)
+ u32 endptstat;
+/* bits 31:16, endpoint transmit buffer ready */
+#define ETBR(e) (((e)>>16)&0xffff)
+/* bits 15:0, endpoint receive buffer ready */
+#define ERBR(e) (((e)>>0)&0xffff)
+ u32 endptcomplete;
+/* bits 31:16, endpoint transmit complete event */
+#define ETCE(e) (((e)>>16)&0xffff)
+/* bits 15:0, endpoint receive complete event */
+#define ERCE(e) (((e)>>0)&0xffff)
+ /* offset: 0x11c */
+ u32 endptctrl[16];
+#define EPCTRL_TXE BIT(23) /* TX endpoint enable */
+#define EPCTRL_TXR BIT(22) /* TX data toggle reset */
+#define EPCTRL_TXI BIT(21) /* TX data toggle inhibit */
+#define EPCTRL_TXT(e) (((e)>>18)&3) /* bits 19:18, TX endpoint type */
+#define EPCTRL_TXT_SHIFT 18
+#define EPCTRL_TXD BIT(17) /* TX endpoint data source */
+#define EPCTRL_TXS BIT(16) /* TX endpoint STALL */
+#define EPCTRL_RXE BIT(7) /* RX endpoint enable */
+#define EPCTRL_RXR BIT(6) /* RX data toggle reset */
+#define EPCTRL_RXI BIT(5) /* RX data toggle inhibit */
+#define EPCTRL_RXT(e) (((e)>>2)&3) /* bits 3:2, RX endpoint type */
+#define EPCTRL_RXT_SHIFT 2 /* bits 19:18, TX endpoint type */
+#define EPCTRL_RXD BIT(1) /* RX endpoint data sink */
+#define EPCTRL_RXS BIT(0) /* RX endpoint STALL */
+} __attribute__ ((packed));
+
+#endif /* __LANGWELL_UDC_H */
+
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 1aaa826396a..2443c0e7a80 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -80,10 +80,10 @@ struct otg_transceiver {
/* for board-specific init logic */
extern int otg_set_transceiver(struct otg_transceiver *);
-#ifdef CONFIG_NOP_USB_XCEIV
+
+/* sometimes transceivers are accessed only through e.g. ULPI */
extern void usb_nop_xceiv_register(void);
extern void usb_nop_xceiv_unregister(void);
-#endif
/* for usb host and peripheral controller drivers */
diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h
new file mode 100644
index 00000000000..e9f0384fa20
--- /dev/null
+++ b/include/linux/usb/r8a66597.h
@@ -0,0 +1,44 @@
+/*
+ * R8A66597 driver platform data
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __LINUX_USB_R8A66597_H
+#define __LINUX_USB_R8A66597_H
+
+#define R8A66597_PLATDATA_XTAL_12MHZ 0x01
+#define R8A66597_PLATDATA_XTAL_24MHZ 0x02
+#define R8A66597_PLATDATA_XTAL_48MHZ 0x03
+
+struct r8a66597_platdata {
+ /* This ops can controll port power instead of DVSTCTR register. */
+ void (*port_power)(int port, int power);
+
+ /* (external controller only) set R8A66597_PLATDATA_XTAL_nnMHZ */
+ unsigned xtal:2;
+
+ /* set one = 3.3V, set zero = 1.5V */
+ unsigned vif:1;
+
+ /* set one = big endian, set zero = little endian */
+ unsigned endian:1;
+};
+#endif
+
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 8cdfed738fe..44801d26a37 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -15,6 +15,7 @@
#include <linux/kref.h>
#include <linux/mutex.h>
+#include <linux/sysrq.h>
#define SERIAL_TTY_MAJOR 188 /* Nice legal number now */
#define SERIAL_TTY_MINORS 254 /* loads of devices :) */
@@ -26,6 +27,13 @@
/* parity check flag */
#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+enum port_dev_state {
+ PORT_UNREGISTERED,
+ PORT_REGISTERING,
+ PORT_REGISTERED,
+ PORT_UNREGISTERING,
+};
+
/**
* usb_serial_port: structure for the specific ports of a device.
* @serial: pointer back to the struct usb_serial owner of this port.
@@ -91,12 +99,17 @@ struct usb_serial_port {
int write_urb_busy;
__u8 bulk_out_endpointAddress;
+ int tx_bytes_flight;
+ int urbs_in_flight;
+
wait_queue_head_t write_wait;
struct work_struct work;
char throttled;
char throttle_req;
char console;
+ unsigned long sysrq; /* sysrq timeout */
struct device dev;
+ enum port_dev_state dev_state;
};
#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
@@ -181,8 +194,10 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
* This will be called when the struct usb_serial structure is fully set
* set up. Do any local initialization of the device, or any private
* memory structure allocation at this point in time.
- * @shutdown: pointer to the driver's shutdown function. This will be
- * called when the device is removed from the system.
+ * @disconnect: pointer to the driver's disconnect function. This will be
+ * called when the device is unplugged or unbound from the driver.
+ * @release: pointer to the driver's release function. This will be called
+ * when the usb_serial data structure is about to be destroyed.
* @usb_driver: pointer to the struct usb_driver that controls this
* device. This is necessary to allow dynamic ids to be added to
* the driver from sysfs.
@@ -207,12 +222,14 @@ struct usb_serial_driver {
struct device_driver driver;
struct usb_driver *usb_driver;
struct usb_dynids dynids;
+ int max_in_flight_urbs;
int (*probe)(struct usb_serial *serial, const struct usb_device_id *id);
int (*attach)(struct usb_serial *serial);
int (*calc_num_ports) (struct usb_serial *serial);
- void (*shutdown)(struct usb_serial *serial);
+ void (*disconnect)(struct usb_serial *serial);
+ void (*release)(struct usb_serial *serial);
int (*port_probe)(struct usb_serial_port *port);
int (*port_remove)(struct usb_serial_port *port);
@@ -294,9 +311,16 @@ extern void usb_serial_generic_read_bulk_callback(struct urb *urb);
extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
extern void usb_serial_generic_throttle(struct tty_struct *tty);
extern void usb_serial_generic_unthrottle(struct tty_struct *tty);
-extern void usb_serial_generic_shutdown(struct usb_serial *serial);
+extern void usb_serial_generic_disconnect(struct usb_serial *serial);
+extern void usb_serial_generic_release(struct usb_serial *serial);
extern int usb_serial_generic_register(int debug);
extern void usb_serial_generic_deregister(void);
+extern void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port,
+ gfp_t mem_flags);
+extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port,
+ unsigned int ch);
+extern int usb_serial_handle_break(struct usb_serial_port *port);
+
extern int usb_serial_bus_register(struct usb_serial_driver *device);
extern void usb_serial_bus_deregister(struct usb_serial_driver *device);