aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/Kconfig32
-rw-r--r--drivers/net/defxx.c928
-rw-r--r--drivers/net/defxx.h58
3 files changed, 664 insertions, 354 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ad92b6a76ee..b79711d441a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2534,7 +2534,7 @@ config RIONET_RX_SIZE
config FDDI
bool "FDDI driver support"
- depends on (PCI || EISA)
+ depends on (PCI || EISA || TC)
help
Fiber Distributed Data Interface is a high speed local area network
design; essentially a replacement for high speed Ethernet. FDDI can
@@ -2544,11 +2544,31 @@ config FDDI
will say N.
config DEFXX
- tristate "Digital DEFEA and DEFPA adapter support"
- depends on FDDI && (PCI || EISA)
- help
- This is support for the DIGITAL series of EISA (DEFEA) and PCI
- (DEFPA) controllers which can connect you to a local FDDI network.
+ tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
+ depends on FDDI && (PCI || EISA || TC)
+ ---help---
+ This is support for the DIGITAL series of TURBOchannel (DEFTA),
+ EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
+ to a local FDDI network.
+
+ To compile this driver as a module, choose M here: the module
+ will be called defxx. If unsure, say N.
+
+config DEFXX_MMIO
+ bool
+ prompt "Use MMIO instead of PIO" if PCI || EISA
+ depends on DEFXX
+ default n if PCI || EISA
+ default y
+ ---help---
+ This instructs the driver to use EISA or PCI memory-mapped I/O
+ (MMIO) as appropriate instead of programmed I/O ports (PIO).
+ Enabling this gives an improvement in processing time in parts
+ of the driver, but it may cause problems with EISA (DEFEA)
+ adapters. TURBOchannel does not have the concept of I/O ports,
+ so MMIO is always used for these (DEFTA) adapters.
+
+ If unsure, say N.
config SKFP
tristate "SysKonnect FDDI PCI support"
diff --git a/drivers/net/defxx.c b/drivers/net/defxx.c
index dc3ab3b5c8c..07d2731c1aa 100644
--- a/drivers/net/defxx.c
+++ b/drivers/net/defxx.c
@@ -10,10 +10,12 @@
*
* Abstract:
* A Linux device driver supporting the Digital Equipment Corporation
- * FDDI EISA and PCI controller families. Supported adapters include:
+ * FDDI TURBOchannel, EISA and PCI controller families. Supported
+ * adapters include:
*
- * DEC FDDIcontroller/EISA (DEFEA)
- * DEC FDDIcontroller/PCI (DEFPA)
+ * DEC FDDIcontroller/TURBOchannel (DEFTA)
+ * DEC FDDIcontroller/EISA (DEFEA)
+ * DEC FDDIcontroller/PCI (DEFPA)
*
* The original author:
* LVS Lawrence V. Stefani <lstefani@yahoo.com>
@@ -193,24 +195,27 @@
* 14 Aug 2004 macro Fix device names reported.
* 14 Jun 2005 macro Use irqreturn_t.
* 23 Oct 2006 macro Big-endian host support.
+ * 14 Dec 2006 macro TURBOchannel support.
*/
/* Include files */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
+#include <linux/bitops.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/eisa.h>
+#include <linux/errno.h>
+#include <linux/fddidevice.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/netdevice.h>
-#include <linux/fddidevice.h>
+#include <linux/pci.h>
#include <linux/skbuff.h>
-#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/tc.h>
#include <asm/byteorder.h>
#include <asm/io.h>
@@ -219,8 +224,8 @@
/* Version information string should be updated prior to each new release! */
#define DRV_NAME "defxx"
-#define DRV_VERSION "v1.09"
-#define DRV_RELDATE "2006/10/23"
+#define DRV_VERSION "v1.10"
+#define DRV_RELDATE "2006/12/14"
static char version[] __devinitdata =
DRV_NAME ": " DRV_VERSION " " DRV_RELDATE
@@ -235,12 +240,41 @@ static char version[] __devinitdata =
*/
#define NEW_SKB_SIZE (PI_RCV_DATA_K_SIZE_MAX+128)
+#define __unused __attribute__ ((unused))
+
+#ifdef CONFIG_PCI
+#define DFX_BUS_PCI(dev) (dev->bus == &pci_bus_type)
+#else
+#define DFX_BUS_PCI(dev) 0
+#endif
+
+#ifdef CONFIG_EISA
+#define DFX_BUS_EISA(dev) (dev->bus == &eisa_bus_type)
+#else
+#define DFX_BUS_EISA(dev) 0
+#endif
+
+#ifdef CONFIG_TC
+#define DFX_BUS_TC(dev) (dev->bus == &tc_bus_type)
+#else
+#define DFX_BUS_TC(dev) 0
+#endif
+
+#ifdef CONFIG_DEFXX_MMIO
+#define DFX_MMIO 1
+#else
+#define DFX_MMIO 0
+#endif
+
/* Define module-wide (static) routines */
static void dfx_bus_init(struct net_device *dev);
+static void dfx_bus_uninit(struct net_device *dev);
static void dfx_bus_config_check(DFX_board_t *bp);
-static int dfx_driver_init(struct net_device *dev, const char *print_name);
+static int dfx_driver_init(struct net_device *dev,
+ const char *print_name,
+ resource_size_t bar_start);
static int dfx_adap_init(DFX_board_t *bp, int get_buffers);
static int dfx_open(struct net_device *dev);
@@ -273,13 +307,13 @@ static void dfx_xmt_flush(DFX_board_t *bp);
/* Define module-wide (static) variables */
-static struct net_device *root_dfx_eisa_dev;
+static struct pci_driver dfx_pci_driver;
+static struct eisa_driver dfx_eisa_driver;
+static struct tc_driver dfx_tc_driver;
/*
* =======================
- * = dfx_port_write_byte =
- * = dfx_port_read_byte =
* = dfx_port_write_long =
* = dfx_port_read_long =
* =======================
@@ -291,12 +325,11 @@ static struct net_device *root_dfx_eisa_dev;
* None
*
* Arguments:
- * bp - pointer to board information
- * offset - register offset from base I/O address
- * data - for dfx_port_write_byte and dfx_port_write_long, this
- * is a value to write.
- * for dfx_port_read_byte and dfx_port_read_byte, this
- * is a pointer to store the read value.
+ * bp - pointer to board information
+ * offset - register offset from base I/O address
+ * data - for dfx_port_write_long, this is a value to write;
+ * for dfx_port_read_long, this is a pointer to store
+ * the read value
*
* Functional Description:
* These routines perform the correct operation to read or write
@@ -310,7 +343,7 @@ static struct net_device *root_dfx_eisa_dev;
* registers using the register offsets defined in DEFXX.H.
*
* PCI port block base addresses are assigned by the PCI BIOS or system
- * firmware. There is one 128 byte port block which can be accessed. It
+ * firmware. There is one 128 byte port block which can be accessed. It
* allows for I/O mapping of both PDQ and PFI registers using the register
* offsets defined in DEFXX.H.
*
@@ -318,7 +351,7 @@ static struct net_device *root_dfx_eisa_dev;
* None
*
* Assumptions:
- * bp->base_addr is a valid base I/O address for this adapter.
+ * bp->base is a valid base I/O address for this adapter.
* offset is a valid register offset for this adapter.
*
* Side Effects:
@@ -329,69 +362,135 @@ static struct net_device *root_dfx_eisa_dev;
* advantage of strict data type checking.
*/
-static inline void dfx_port_write_byte(
- DFX_board_t *bp,
- int offset,
- u8 data
- )
+static inline void dfx_writel(DFX_board_t *bp, int offset, u32 data)
+{
+ writel(data, bp->base.mem + offset);
+ mb();
+}
- {
- u16 port = bp->base_addr + offset;
+static inline void dfx_outl(DFX_board_t *bp, int offset, u32 data)
+{
+ outl(data, bp->base.port + offset);
+}
- outb(data, port);
- }
+static void dfx_port_write_long(DFX_board_t *bp, int offset, u32 data)
+{
+ struct device __unused *bdev = bp->bus_dev;
+ int dfx_bus_tc = DFX_BUS_TC(bdev);
+ int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
-static inline void dfx_port_read_byte(
- DFX_board_t *bp,
- int offset,
- u8 *data
- )
+ if (dfx_use_mmio)
+ dfx_writel(bp, offset, data);
+ else
+ dfx_outl(bp, offset, data);
+}
- {
- u16 port = bp->base_addr + offset;
- *data = inb(port);
- }
+static inline void dfx_readl(DFX_board_t *bp, int offset, u32 *data)
+{
+ mb();
+ *data = readl(bp->base.mem + offset);
+}
-static inline void dfx_port_write_long(
- DFX_board_t *bp,
- int offset,
- u32 data
- )
+static inline void dfx_inl(DFX_board_t *bp, int offset, u32 *data)
+{
+ *data = inl(bp->base.port + offset);
+}
- {
- u16 port = bp->base_addr + offset;
+static void dfx_port_read_long(DFX_board_t *bp, int offset, u32 *data)
+{
+ struct device __unused *bdev = bp->bus_dev;
+ int dfx_bus_tc = DFX_BUS_TC(bdev);
+ int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
- outl(data, port);
- }
+ if (dfx_use_mmio)
+ dfx_readl(bp, offset, data);
+ else
+ dfx_inl(bp, offset, data);
+}
-static inline void dfx_port_read_long(
- DFX_board_t *bp,
- int offset,
- u32 *data
- )
- {
- u16 port = bp->base_addr + offset;
+/*
+ * ================
+ * = dfx_get_bars =
+ * ================
+ *
+ * Overview:
+ * Retrieves the address range used to access control and status
+ * registers.
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * bdev - pointer to device information
+ * bar_start - pointer to store the start address
+ * bar_len - pointer to store the length of the area
+ *
+ * Assumptions:
+ * I am sure there are some.
+ *
+ * Side Effects:
+ * None
+ */
+static void dfx_get_bars(struct device *bdev,
+ resource_size_t *bar_start, resource_size_t *bar_len)
+{
+ int dfx_bus_pci = DFX_BUS_PCI(bdev);
+ int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+ int dfx_bus_tc = DFX_BUS_TC(bdev);
+ int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
- *data = inl(port);
- }
+ if (dfx_bus_pci) {
+ int num = dfx_use_mmio ? 0 : 1;
+ *bar_start = pci_resource_start(to_pci_dev(bdev), num);
+ *bar_len = pci_resource_len(to_pci_dev(bdev), num);
+ }
+ if (dfx_bus_eisa) {
+ unsigned long base_addr = to_eisa_device(bdev)->base_addr;
+ resource_size_t bar;
+
+ if (dfx_use_mmio) {
+ bar = inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_2);
+ bar <<= 8;
+ bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_1);
+ bar <<= 8;
+ bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_0);
+ bar <<= 16;
+ *bar_start = bar;
+ bar = inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_2);
+ bar <<= 8;
+ bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_1);
+ bar <<= 8;
+ bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_0);
+ bar <<= 16;
+ *bar_len = (bar | PI_MEM_ADD_MASK_M) + 1;
+ } else {
+ *bar_start = base_addr;
+ *bar_len = PI_ESIC_K_CSR_IO_LEN;
+ }
+ }
+ if (dfx_bus_tc) {
+ *bar_start = to_tc_dev(bdev)->resource.start +
+ PI_TC_K_CSR_OFFSET;
+ *bar_len = PI_TC_K_CSR_LEN;
+ }
+}
/*
- * =============
- * = dfx_init_one_pci_or_eisa =
- * =============
+ * ================
+ * = dfx_register =
+ * ================
*
* Overview:
- * Initializes a supported FDDI EISA or PCI controller
+ * Initializes a supported FDDI controller
*
* Returns:
* Condition code
*
* Arguments:
- * pdev - pointer to pci device information (NULL for EISA)
- * ioaddr - pointer to port (NULL for PCI)
+ * bdev - pointer to device information
*
* Functional Description:
*
@@ -407,56 +506,74 @@ static inline void dfx_port_read_long(
* initialized and the board resources are read and stored in
* the device structure.
*/
-static int __devinit dfx_init_one_pci_or_eisa(struct pci_dev *pdev, long ioaddr)
+static int __devinit dfx_register(struct device *bdev)
{
static int version_disp;
- char *print_name = DRV_NAME;
+ int dfx_bus_pci = DFX_BUS_PCI(bdev);
+ int dfx_bus_tc = DFX_BUS_TC(bdev);
+ int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+ char *print_name = bdev->bus_id;
struct net_device *dev;
DFX_board_t *bp; /* board pointer */
+ resource_size_t bar_start = 0; /* pointer to port */
+ resource_size_t bar_len = 0; /* resource length */
int alloc_size; /* total buffer size used */
- int err;
+ struct resource *region;
+ int err = 0;
if (!version_disp) { /* display version info if adapter is found */
version_disp = 1; /* set display flag to TRUE so that */
printk(version); /* we only display this string ONCE */
}
- if (pdev != NULL)
- print_name = pci_name(pdev);
-
dev = alloc_fddidev(sizeof(*bp));
if (!dev) {
- printk(KERN_ERR "%s: unable to allocate fddidev, aborting\n",
+ printk(KERN_ERR "%s: Unable to allocate fddidev, aborting\n",
print_name);
return -ENOMEM;
}
/* Enable PCI device. */
- if (pdev != NULL) {
- err = pci_enable_device (pdev);
- if (err) goto err_out;
- ioaddr = pci_resource_start (pdev, 1);
+ if (dfx_bus_pci && pci_enable_device(to_pci_dev(bdev))) {
+ printk(KERN_ERR "%s: Cannot enable PCI device, aborting\n",
+ print_name);
+ goto err_out;
}
SET_MODULE_OWNER(dev);
- if (pdev != NULL)
- SET_NETDEV_DEV(dev, &pdev->dev);
+ SET_NETDEV_DEV(dev, bdev);
+
+ bp = netdev_priv(dev);
+ bp->bus_dev = bdev;
+ dev_set_drvdata(bdev, dev);
- bp = dev->priv;
+ dfx_get_bars(bdev, &bar_start, &bar_len);
- if (!request_region(ioaddr,
- pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN,
- print_name)) {
+ if (dfx_use_mmio)
+ region = request_mem_region(bar_start, bar_len, print_name);
+ else
+ region = request_region(bar_start, bar_len, print_name);
+ if (!region) {
printk(KERN_ERR "%s: Cannot reserve I/O resource "
- "0x%x @ 0x%lx, aborting\n", print_name,
- pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN, ioaddr);
+ "0x%lx @ 0x%lx, aborting\n",
+ print_name, (long)bar_len, (long)bar_start);
err = -EBUSY;
- goto err_out;
+ goto err_out_disable;
}
- /* Initialize new device structure */
+ /* Set up I/O base address. */
+ if (dfx_use_mmio) {
+ bp->base.mem = ioremap_nocache(bar_start, bar_len);
+ if (!bp->base.mem) {
+ printk(KERN_ERR "%s: Cannot map MMIO\n", print_name);
+ goto err_out_region;
+ }
+ } else {
+ bp->base.port = bar_start;
+ dev->base_addr = bar_start;
+ }
- dev->base_addr = ioaddr; /* save port (I/O) base address */
+ /* Initialize new device structure */
dev->get_stats = dfx_ctl_get_stats;
dev->open = dfx_open;
@@ -465,22 +582,12 @@ static int __devinit dfx_init_one_pci_or_eisa(struct pci_dev *pdev, long ioaddr)
dev->set_multicast_list = dfx_ctl_set_multicast_list;
dev->set_mac_address = dfx_ctl_set_mac_address;
- if (pdev == NULL) {
- /* EISA board */
- bp->bus_type = DFX_BUS_TYPE_EISA;
- bp->next = root_dfx_eisa_dev;
- root_dfx_eisa_dev = dev;
- } else {
- /* PCI board */
- bp->bus_type = DFX_BUS_TYPE_PCI;
- bp->pci_dev = pdev;
- pci_set_drvdata (pdev, dev);
- pci_set_master (pdev);
- }
+ if (dfx_bus_pci)
+ pci_set_master(to_pci_dev(bdev));
- if (dfx_driver_init(dev, print_name) != DFX_K_SUCCESS) {
+ if (dfx_driver_init(dev, print_name, bar_start) != DFX_K_SUCCESS) {
err = -ENODEV;
- goto err_out_region;
+ goto err_out_unmap;
}
err = register_netdev(dev);
@@ -499,44 +606,28 @@ err_out_kfree:
sizeof(PI_CONSUMER_BLOCK) +
(PI_ALIGN_K_DESC_BLK - 1);
if (bp->kmalloced)
- pci_free_consistent(pdev, alloc_size,
- bp->kmalloced, bp->kmalloced_dma);
+ dma_free_coherent(bdev, alloc_size,
+ bp->kmalloced, bp->kmalloced_dma);
+
+err_out_unmap:
+ if (dfx_use_mmio)
+ iounmap(bp->base.mem);
+
err_out_region:
- release_region(ioaddr, pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN);
+ if (dfx_use_mmio)
+ release_mem_region(bar_start, bar_len);
+ else
+ release_region(bar_start, bar_len);
+
+err_out_disable:
+ if (dfx_bus_pci)
+ pci_disable_device(to_pci_dev(bdev));
+
err_out:
free_netdev(dev);
return err;
}
-static int __devinit dfx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- return dfx_init_one_pci_or_eisa(pdev, 0);
-}
-
-static int __init dfx_eisa_init(void)
-{
- int rc = -ENODEV;
- int i; /* used in for loops */
- u16 port; /* temporary I/O (port) address */
- u32 slot_id; /* EISA hardware (slot) ID read from adapter */
-
- DBG_printk("In dfx_eisa_init...\n");
-
- /* Scan for FDDI EISA controllers */
-
- for (i=0; i < DFX_MAX_EISA_SLOTS; i++) /* only scan for up to 16 EISA slots */
- {
- port = (i << 12) + PI_ESIC_K_SLOT_ID; /* port = I/O address for reading slot ID */
- slot_id = inl(port); /* read EISA HW (slot) ID */
- if ((slot_id & 0xF0FFFFFF) == DEFEA_PRODUCT_ID)
- {
- port = (i << 12); /* recalc base addr */
-
- if (dfx_init_one_pci_or_eisa(NULL, port) == 0) rc = 0;
- }
- }
- return rc;
-}
/*
* ================
@@ -544,7 +635,7 @@ static int __init dfx_eisa_init(void)
* ================
*
* Overview:
- * Initializes EISA and PCI controller bus-specific logic.
+ * Initializes the bus-specific controller logic.
*
* Returns:
* None
@@ -560,7 +651,7 @@ static int __init dfx_eisa_init(void)
* None
*
* Assumptions:
- * dev->base_addr has already been set with the proper
+ * bp->base has already been set with the proper
* base I/O address for this device.
*
* Side Effects:
@@ -571,87 +662,103 @@ static int __init dfx_eisa_init(void)
static void __devinit dfx_bus_init(struct net_device *dev)
{
- DFX_board_t *bp = dev->priv;
- u8 val; /* used for I/O read/writes */
+ DFX_board_t *bp = netdev_priv(dev);
+ struct device *bdev = bp->bus_dev;
+ int dfx_bus_pci = DFX_BUS_PCI(bdev);
+ int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+ int dfx_bus_tc = DFX_BUS_TC(bdev);
+ int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+ u8 val;
DBG_printk("In dfx_bus_init...\n");
- /*
- * Initialize base I/O address field in bp structure
- *
- * Note: bp->base_addr is the same as dev->base_addr.
- * It's useful because often we'll need to read
- * or write registers where we already have the
- * bp pointer instead of the dev pointer. Having
- * the base address in the bp structure will
- * save a pointer dereference.
- *
- * IMPORTANT!! This field must be defined before
- * any of the dfx_port_* inline functions are
- * called.
- */
-
- bp->base_addr = dev->base_addr;
-
- /* And a pointer back to the net_device struct */
+ /* Initialize a pointer back to the net_device struct */
bp->dev = dev;
/* Initialize adapter based on bus type */
- if (bp->bus_type == DFX_BUS_TYPE_EISA)
- {
- /* Get the interrupt level from the ESIC chip */
-
- dfx_port_read_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, &val);
- switch ((val & PI_CONFIG_STAT_0_M_IRQ) >> PI_CONFIG_STAT_0_V_IRQ)
- {
- case PI_CONFIG_STAT_0_IRQ_K_9:
- dev->irq = 9;
- break;
-
- case PI_CONFIG_STAT_0_IRQ_K_10:
- dev->irq = 10;
- break;
+ if (dfx_bus_tc)
+ dev->irq = to_tc_dev(bdev)->interrupt;
+ if (dfx_bus_eisa) {
+ unsigned long base_addr = to_eisa_device(bdev)->base_addr;
- case PI_CONFIG_STAT_0_IRQ_K_11:
- dev->irq = 11;
- break;
+ /* Get the interrupt level from the ESIC chip. */
+ val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+ val &= PI_CONFIG_STAT_0_M_IRQ;
+ val >>= PI_CONFIG_STAT_0_V_IRQ;
- case PI_CONFIG_STAT_0_IRQ_K_15:
- dev->irq = 15;
- break;
- }
-
- /* Enable access to I/O on the board by writing 0x03 to Function Control Register */
+ switch (val) {
+ case PI_CONFIG_STAT_0_IRQ_K_9:
+ dev->irq = 9;
+ break;
- dfx_port_write_byte(bp, PI_ESIC_K_FUNCTION_CNTRL, PI_ESIC_K_FUNCTION_CNTRL_IO_ENB);
+ case PI_CONFIG_STAT_0_IRQ_K_10:
+ dev->irq = 10;
+ break;
- /* Set the I/O decode range of the board */
+ case PI_CONFIG_STAT_0_IRQ_K_11:
+ dev->irq = 11;
+ break;
- val = ((dev->base_addr >> 12) << PI_IO_CMP_V_SLOT);
- dfx_port_write_byte(bp, PI_ESIC_K_IO_CMP_0_1, val);
- dfx_port_write_byte(bp, PI_ESIC_K_IO_CMP_1_1, val);
+ case PI_CONFIG_STAT_0_IRQ_K_15:
+ dev->irq = 15;
+ break;
+ }
- /* Enable access to rest of module (including PDQ and packet memory) */
+ /*
+ * Enable memory decoding (MEMCS0) and/or port decoding
+ * (IOCS1/IOCS0) as appropriate in Function Control
+ * Register. One of the port chip selects seems to be
+ * used for the Burst Holdoff register, but this bit of
+ * documentation is missing and as yet it has not been
+ * determined which of the two. This is also the reason
+ * the size of the decoded port range is twice as large
+ * as one required by the PDQ.
+ */
- dfx_port_write_byte(bp, PI_ESIC_K_SLOT_CNTRL, PI_SLOT_CNTRL_M_ENB);
+ /* Set the decode range of the board. */
+ val = ((bp->base.port >> 12) << PI_IO_CMP_V_SLOT);
+ outb(base_addr + PI_ESIC_K_IO_ADD_CMP_0_1, val);
+ outb(base_addr + PI_ESIC_K_IO_ADD_CMP_0_0, 0);
+ outb(base_addr + PI_ESIC_K_IO_ADD_CMP_1_1, val);
+ outb(base_addr + PI_ESIC_K_IO_ADD_CMP_1_0, 0);
+ val = PI_ESIC_K_CSR_IO_LEN - 1;
+ outb(base_addr + PI_ESIC_K_IO_ADD_MASK_0_1, (val >> 8) & 0xff);
+ outb(base_addr + PI_ESIC_K_IO_ADD_MASK_0_0, val & 0xff);
+ outb(base_addr + PI_ESIC_K_IO_ADD_MASK_1_1, (val >> 8) & 0xff);
+ outb(base_addr + PI_ESIC_K_IO_ADD_MASK_1_0, val & 0xff);
+
+ /* Enable the decoders. */
+ val = PI_FUNCTION_CNTRL_M_IOCS1 | PI_FUNCTION_CNTRL_M_IOCS0;
+ if (dfx_use_mmio)
+ val |= PI_FUNCTION_CNTRL_M_MEMCS0;
+ outb(base_addr + PI_ESIC_K_FUNCTION_CNTRL, val);
/*
- * Map PDQ registers into I/O space. This is done by clearing a bit
- * in Burst Holdoff register.
+ * Enable access to the rest of the module
+ * (including PDQ and packet memory).
*/
+ val = PI_SLOT_CNTRL_M_ENB;
+ outb(base_addr + PI_ESIC_K_SLOT_CNTRL, val);
- dfx_port_read_byte(bp, PI_ESIC_K_BURST_HOLDOFF, &val);
- dfx_port_write_byte(bp, PI_ESIC_K_BURST_HOLDOFF, (val & ~PI_BURST_HOLDOFF_M_MEM_MAP));
+ /*
+ * Map PDQ registers into memory or port space. This is
+ * done with a bit in the Burst Holdoff register.
+ */
+ val = inb(base_addr + PI_DEFEA_K_BURST_HOLDOFF);
+ if (dfx_use_mmio)
+ val |= PI_BURST_HOLDOFF_V_MEM_MAP;
+ else
+ val &= ~PI_BURST_HOLDOFF_V_MEM_MAP;
+ outb(base_addr + PI_DEFEA_K_BURST_HOLDOFF, val);
/* Enable interrupts at EISA bus interface chip (ESIC) */
-
- dfx_port_read_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, &val);
- dfx_port_write_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, (val | PI_CONFIG_STAT_0_M_INT_ENB));
- }
- else
- {
- struct pci_dev *pdev = bp->pci_dev;
+ val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+ val |= PI_CONFIG_STAT_0_M_INT_ENB;
+ outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, val);
+ }
+ if (dfx_bus_pci) {
+ struct pci_dev *pdev = to_pci_dev(bdev);
/* Get the interrupt level from the PCI Configuration Table */
@@ -660,17 +767,70 @@ static void __devinit dfx_bus_init(struct net_device *dev)
/* Check Latency Timer and set if less than minimal */
pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &val);
- if (val < PFI_K_LAT_TIMER_MIN) /* if less than min, override with default */
- {
+ if (val < PFI_K_LAT_TIMER_MIN) {
val = PFI_K_LAT_TIMER_DEF;
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, val);
- }
+ }
/* Enable interrupts at PCI bus interface chip (PFI) */
+ val = PFI_MODE_M_PDQ_INT_ENB | PFI_MODE_M_DMA_ENB;
+ dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL, val);
+ }
+}
- dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL, (PFI_MODE_M_PDQ_INT_ENB | PFI_MODE_M_DMA_ENB));
- }
+/*
+ * ==================
+ * = dfx_bus_uninit =
+ * ==================
+ *
+ * Overview:
+ * Uninitializes the bus-specific controller logic.
+ *
+ * Returns:
+ * None
+ *
+ * Arguments:
+ * dev - pointer to device information
+ *
+ * Functional Description:
+ * Perform bus-specific logic uninitialization.
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * bp->base has already been set with the proper
+ * base I/O address for this device.
+ *
+ * Side Effects:
+ * Interrupts are disabled at the adapter bus-specific logic.
+ */
+
+static void __devinit dfx_bus_uninit(struct net_device *dev)
+{
+ DFX_board_t *bp = netdev_priv(dev);
+ struct device *bdev = bp->bus_dev;
+ int dfx_bus_pci = DFX_BUS_PCI(bdev);
+ int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+ u8 val;
+
+ DBG_printk("In dfx_bus_uninit...\n");
+
+ /* Uninitialize adapter based on bus type */
+
+ if (dfx_bus_eisa) {
+ unsigned long base_addr = to_eisa_device(bdev)->base_addr;
+
+ /* Disable interrupts at EISA bus interface chip (ESIC) */
+ val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+ val &= ~PI_CONFIG_STAT_0_M_INT_ENB;
+ outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, val);
+ }
+ if (dfx_bus_pci) {
+ /* Disable interrupts at PCI bus interface chip (PFI) */
+ dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL, 0);
}
+}
/*
@@ -705,18 +865,16 @@ static void __devinit dfx_bus_init(struct net_device *dev)
static void __devinit dfx_bus_config_check(DFX_board_t *bp)
{
+ struct device __unused *bdev = bp->bus_dev;
+ int dfx_bus_eisa = DFX_BUS_EISA(bdev);
int status; /* return code from adapter port control call */
- u32 slot_id; /* EISA-bus hardware id (DEC3001, DEC3002,...) */
u32 host_data; /* LW data returned from port control call */
DBG_printk("In dfx_bus_config_check...\n");
/* Configuration check only valid for EISA adapter */
- if (bp->bus_type == DFX_BUS_TYPE_EISA)
- {
- dfx_port_read_long(bp, PI_ESIC_K_SLOT_ID, &slot_id);
-
+ if (dfx_bus_eisa) {
/*
* First check if revision 2 EISA controller. Rev. 1 cards used
* PDQ revision B, so no workaround needed in this case. Rev. 3
@@ -724,14 +882,11 @@ static void __devinit dfx_bus_config_check(DFX_board_t *bp)
* case, either. Only Rev. 2 cards used either Rev. D or E
* chips, so we must verify the chip revision on Rev. 2 cards.
*/
-
- if (slot_id == DEFEA_PROD_ID_2)
- {
+ if (to_eisa_device(bdev)->id.driver_data == DEFEA_PROD_ID_2) {
/*
- * Revision 2 FDDI EISA controller found, so let's check PDQ
- * revision of adapter.
+ * Revision 2 FDDI EISA controller found,
+ * so let's check PDQ revision of adapter.
*/
-
status = dfx_hw_port_ctrl_req(bp,
PI_PCTRL_M_SUB_CMD,
PI_SUB_CMD_K_PDQ_REV_GET,
@@ -805,13 +960,20 @@ static void __devinit dfx_bus_config_check(DFX_board_t *bp)
*/
static int __devinit dfx_driver_init(struct net_device *dev,
- const char *print_name)
+ const char *print_name,
+ resource_size_t bar_start)
{
- DFX_board_t *bp = dev->priv;
- int alloc_size; /* total buffer size needed */
- char *top_v, *curr_v; /* virtual addrs into memory block */
- dma_addr_t top_p, curr_p; /* physical addrs into memory block */
- u32 data; /* host data register value */
+ DFX_board_t *bp = netdev_priv(dev);
+ struct device *bdev = bp->bus_dev;
+ int dfx_bus_pci = DFX_BUS_PCI(bdev);
+ int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+ int dfx_bus_tc = DFX_BUS_TC(bdev);
+ int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+ int alloc_size; /* total buffer size needed */
+ char *top_v, *curr_v; /* virtual addrs into memory block */
+ dma_addr_t top_p, curr_p; /* physical addrs into memory block */
+ u32 data, le32; /* host data register value */
+ char *board_name = NULL;
DBG_printk("In dfx_driver_init...\n");
@@ -860,8 +1022,8 @@ static int __devinit dfx_driver_init(struct net_device *dev,
print_name);
return(DFX_K_FAILURE);
}
- data = cpu_to_le32(data);
- memcpy(&bp->factory_mac_addr[0], &data, sizeof(u32));
+ le32 = cpu_to_le32(data);
+ memcpy(&bp->factory_mac_addr[0], &le32, sizeof(u32));
if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_HI, 0,
&data) != DFX_K_SUCCESS) {
@@ -869,8 +1031,8 @@ static int __devinit dfx_driver_init(struct net_device *dev,
print_name);
return(DFX_K_FAILURE);
}
- data = cpu_to_le32(data);
- memcpy(&bp->factory_mac_addr[4], &data, sizeof(u16));
+ le32 = cpu_to_le32(data);
+ memcpy(&bp->factory_mac_addr[4], &le32, sizeof(u16));
/*
* Set current address to factory address
@@ -880,20 +1042,18 @@ static int __devinit dfx_driver_init(struct net_device *dev,
*/
memcpy(dev->dev_addr, bp->factory_mac_addr, FDDI_K_ALEN);
- if (bp->bus_type == DFX_BUS_TYPE_EISA)
- printk("%s: DEFEA at I/O addr = 0x%lX, IRQ = %d, "
- "Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n",
- print_name, dev->base_addr, dev->irq,
- dev->dev_addr[0], dev->dev_addr[1],
- dev->dev_addr[2], dev->dev_addr[3],
- dev->dev_addr[4], dev->dev_addr[5]);
- else
- printk("%s: DEFPA at I/O addr = 0x%lX, IRQ = %d, "
- "Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n",
- print_name, dev->base_addr, dev->irq,
- dev->dev_addr[0], dev->dev_addr[1],
- dev->dev_addr[2], dev->dev_addr[3],
- dev->dev_addr[4], dev->dev_addr[5]);
+ if (dfx_bus_tc)
+ board_name = "DEFTA";
+ if (dfx_bus_eisa)
+ board_name = "DEFEA";
+ if (dfx_bus_pci)
+ board_name = "DEFPA";
+ pr_info("%s: %s at %saddr = 0x%llx, IRQ = %d, "
+ "Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n",
+ print_name, board_name, dfx_use_mmio ? "" : "I/O ",
+ (long long)bar_start, dev->irq,
+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
/*
* Get memory for descriptor block, consumer block, and other buffers
@@ -908,8 +1068,9 @@ static int __devinit dfx_driver_init(struct net_device *dev,
#endif
sizeof(PI_CONSUMER_BLOCK) +
(PI_ALIGN_K_DESC_BLK - 1);
- bp->kmalloced = top_v = pci_alloc_consistent(bp->pci_dev, alloc_size,
- &bp->kmalloced_dma);
+ bp->kmalloced = top_v = dma_alloc_coherent(bp->bus_dev, alloc_size,
+ &bp->kmalloced_dma,
+ GFP_ATOMIC);
if (top_v == NULL) {
printk("%s: Could not allocate memory for host buffers "
"and structures!\n", print_name);
@@ -1219,14 +1380,15 @@ static int dfx_adap_init(DFX_board_t *bp, int get_buffers)
static int dfx_open(struct net_device *dev)
{
+ DFX_board_t *bp = netdev_priv(dev);
int ret;
- DFX_board_t *bp = dev->priv;
DBG_printk("In dfx_open...\n");
/* Register IRQ - support shared interrupts by passing device ptr */
- ret = request_irq(dev->irq, dfx_interrupt, IRQF_SHARED, dev->name, dev);
+ ret = request_irq(dev->irq, dfx_interrupt, IRQF_SHARED, dev->name,
+ dev);
if (ret) {
printk(KERN_ERR "%s: Requested IRQ %d is busy\n", dev->name, dev->irq);
return ret;
@@ -1309,7 +1471,7 @@ static int dfx_open(struct net_device *dev)
static int dfx_close(struct net_device *dev)
{
- DFX_board_t *bp = dev->priv;
+ DFX_board_t *bp = netdev_priv(dev);
DBG_printk("In dfx_close...\n");
@@ -1645,7 +1807,7 @@ static void dfx_int_type_0_process(DFX_board_t *bp)
static void dfx_int_common(struct net_device *dev)
{
- DFX_board_t *bp = dev->priv;
+ DFX_board_t *bp = netdev_priv(dev);
PI_UINT32 port_status; /* Port Status register */
/* Process xmt interrupts - frequent case, so always call this routine */
@@ -1715,18 +1877,16 @@ static void dfx_int_common(struct net_device *dev)
static irqreturn_t dfx_interrupt(int irq, void *dev_id)
{
- struct net_device *dev = dev_id;
- DFX_board_t *bp; /* private board structure pointer */
-
- /* Get board pointer only if device structure is valid */
-
- bp = dev->priv;
-
- /* See if we're already servicing an interrupt */
+ struct net_device *dev = dev_id;
+ DFX_board_t *bp = netdev_priv(dev);
+ struct device *bdev = bp->bus_dev;
+ int dfx_bus_pci = DFX_BUS_PCI(bdev);
+ int dfx_bus_eisa = DFX_BUS_EISA(bdev);
+ int dfx_bus_tc = DFX_BUS_TC(bdev);
/* Service adapter interrupts */
- if (bp->bus_type == DFX_BUS_TYPE_PCI) {
+ if (dfx_bus_pci) {
u32 status;
dfx_port_read_long(bp, PFI_K_REG_STATUS, &status);
@@ -1750,10 +1910,12 @@ static irqreturn_t dfx_interrupt(int irq, void *dev_id)
PFI_MODE_M_DMA_ENB));
spin_unlock(&bp->lock);
- } else {
+ }
+ if (dfx_bus_eisa) {
+ unsigned long base_addr = to_eisa_device(bdev)->base_addr;
u8 status;
- dfx_port_read_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, &status);
+ status = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
if (!(status & PI_CONFIG_STAT_0_M_PEND))
return IRQ_NONE;
@@ -1761,15 +1923,35 @@ static irqreturn_t dfx_interrupt(int irq, void *dev_id)
/* Disable interrupts at the ESIC */
status &= ~PI_CONFIG_STAT_0_M_INT_ENB;
- dfx_port_write_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, status);
+ outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, status);
/* Call interrupt service routine for this adapter */
dfx_int_common(dev);
/* Reenable interrupts at the ESIC */
- dfx_port_read_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, &status);
+ status = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
status |= PI_CONFIG_STAT_0_M_INT_ENB;
- dfx_port_write_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, status);
+ outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, status);
+
+ spin_unlock(&bp->lock);
+ }
+ if (dfx_bus_tc) {
+ u32 status;
+
+ dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_STATUS, &status);
+ if (!(status & (PI_PSTATUS_M_RCV_DATA_PENDING |
+ PI_PSTATUS_M_XMT_DATA_PENDING |
+ PI_PSTATUS_M_SMT_HOST_PENDING |
+ PI_PSTATUS_M_UNSOL_PENDING |
+ PI_PSTATUS_M_CMD_RSP_PENDING |
+ PI_PSTATUS_M_CMD_REQ_PENDING |
+ PI_PSTATUS_M_TYPE_0_PENDING)))
+ return IRQ_NONE;
+
+ spin_lock(&bp->lock);
+
+ /* Call interrupt service routine for this adapter */
+ dfx_int_common(dev);
spin_unlock(&bp->lock);
}
@@ -1823,7 +2005,7 @@ static irqreturn_t dfx_interrupt(int irq, void *dev_id)
static struct net_device_stats *dfx_ctl_get_stats(struct net_device *dev)
{
- DFX_board_t *bp = dev->priv;
+ DFX_board_t *bp = netdev_priv(dev);
/* Fill the bp->stats structure with driver-maintained counters */
@@ -2009,8 +2191,8 @@ static struct net_device_stats *dfx_ctl_get_stats(struct net_device *dev)
*/
static void dfx_ctl_set_multicast_list(struct net_device *dev)
- {
- DFX_board_t *bp = dev->priv;
+{
+ DFX_board_t *bp = netdev_priv(dev);
int i; /* used as index in for loop */
struct dev_mc_list *dmi; /* ptr to multicast addr entry */
@@ -2124,8 +2306,8 @@ static void dfx_ctl_set_multicast_list(struct net_device *dev)
static int dfx_ctl_set_mac_address(struct net_device *dev, void *addr)
{
- DFX_board_t *bp = dev->priv;
struct sockaddr *p_sockaddr = (struct sockaddr *)addr;
+ DFX_board_t *bp = netdev_priv(dev);
/* Copy unicast address to driver-maintained structs and update count */
@@ -2764,9 +2946,9 @@ static int dfx_rcv_init(DFX_board_t *bp, int get_buffers)
my_skb_align(newskb, 128);
bp->descr_block_virt->rcv_data[i + j].long_1 =
- (u32)pci_map_single(bp->pci_dev, newskb->data,
+ (u32)dma_map_single(bp->bus_dev, newskb->data,
NEW_SKB_SIZE,
- PCI_DMA_FROMDEVICE);
+ DMA_FROM_DEVICE);
/*
* p_rcv_buff_va is only used inside the
* kernel so we put the skb pointer here.
@@ -2880,17 +3062,17 @@ static void dfx_rcv_queue_process(
my_skb_align(newskb, 128);
skb = (struct sk_buff *)bp->p_rcv_buff_va[entry];
- pci_unmap_single(bp->pci_dev,
+ dma_unmap_single(bp->bus_dev,
bp->descr_block_virt->rcv_data[entry].long_1,
NEW_SKB_SIZE,
- PCI_DMA_FROMDEVICE);
+ DMA_FROM_DEVICE);
skb_reserve(skb, RCV_BUFF_K_PADDING);
bp->p_rcv_buff_va[entry] = (char *)newskb;
bp->descr_block_virt->rcv_data[entry].long_1 =
- (u32)pci_map_single(bp->pci_dev,
+ (u32)dma_map_single(bp->bus_dev,
newskb->data,
NEW_SKB_SIZE,
- PCI_DMA_FROMDEVICE);
+ DMA_FROM_DEVICE);
} else
skb = NULL;
} else
@@ -3010,7 +3192,7 @@ static int dfx_xmt_queue_pkt(
)
{
- DFX_board_t *bp = dev->priv;
+ DFX_board_t *bp = netdev_priv(dev);
u8 prod; /* local transmit producer index */
PI_XMT_DESCR *p_xmt_descr; /* ptr to transmit descriptor block entry */
XMT_DRIVER_DESCR *p_xmt_drv_descr; /* ptr to transmit driver descriptor */
@@ -3116,8 +3298,8 @@ static int dfx_xmt_queue_pkt(
*/
p_xmt_descr->long_0 = (u32) (PI_XMT_DESCR_M_SOP | PI_XMT_DESCR_M_EOP | ((skb->len) << PI_XMT_DESCR_V_SEG_LEN));
- p_xmt_descr->long_1 = (u32)pci_map_single(bp->pci_dev, skb->data,
- skb->len, PCI_DMA_TODEVICE);
+ p_xmt_descr->long_1 = (u32)dma_map_single(bp->bus_dev, skb->data,
+ skb->len, DMA_TO_DEVICE);
/*
* Verify that descriptor is actually available
@@ -3220,10 +3402,10 @@ static int dfx_xmt_done(DFX_board_t *bp)
/* Return skb to operating system */
comp = bp->rcv_xmt_reg.index.xmt_comp;
- pci_unmap_single(bp->pci_dev,
+ dma_unmap_single(bp->bus_dev,
bp->descr_block_virt->xmt_data[comp].long_1,
p_xmt_drv_descr->p_skb->len,
- PCI_DMA_TODEVICE);
+ DMA_TO_DEVICE);
dev_kfree_skb_irq(p_xmt_drv_descr->p_skb);
/*
@@ -3344,10 +3526,10 @@ static void dfx_xmt_flush( DFX_board_t *bp )
/* Return skb to operating system */
comp = bp->rcv_xmt_reg.index.xmt_comp;
- pci_unmap_single(bp->pci_dev,
+ dma_unmap_single(bp->bus_dev,
bp->descr_block_virt->xmt_data[comp].long_1,
p_xmt_drv_descr->p_skb->len,
- PCI_DMA_TODEVICE);
+ DMA_TO_DEVICE);
dev_kfree_skb(p_xmt_drv_descr->p_skb);
/* Increment transmit error counter */
@@ -3375,13 +3557,44 @@ static void dfx_xmt_flush( DFX_board_t *bp )
bp->cons_block_virt->xmt_rcv_data = prod_cons;
}
-static void __devexit dfx_remove_one_pci_or_eisa(struct pci_dev *pdev, struct net_device *dev)
+/*
+ * ==================
+ * = dfx_unregister =
+ * ==================
+ *
+ * Overview:
+ * Shuts down an FDDI controller
+ *
+ * Returns:
+ * Condition code
+ *
+ * Arguments:
+ * bdev - pointer to device information
+ *
+ * Functional Description:
+ *
+ * Return Codes:
+ * None
+ *
+ * Assumptions:
+ * It compiles so it should work :-( (PCI cards do :-)
+ *
+ * Side Effects:
+ * Device structures for FDDI adapters (fddi0, fddi1, etc) are
+ * freed.
+ */
+static void __devexit dfx_unregister(struct device *bdev)
{
- DFX_board_t *bp = dev->priv;
+ struct net_device *dev = dev_get_drvdata(bdev);
+ DFX_board_t *bp = netdev_priv(dev);
+ int dfx_bus_pci = DFX_BUS_PCI(bdev);
+ int dfx_bus_tc = DFX_BUS_TC(bdev);
+ int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
+ resource_size_t bar_start = 0; /* pointer to port */
+ resource_size_t bar_len = 0; /* resource length */
int alloc_size; /* total buffer size used */
unregister_netdev(dev);
- release_region(dev->base_addr, pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN );
alloc_size = sizeof(PI_DESCR_BLOCK) +
PI_CMD_REQ_K_SIZE_MAX + PI_CMD_RSP_K_SIZE_MAX +
@@ -3391,78 +3604,141 @@ static void __devexit dfx_remove_one_pci_or_eisa(struct pci_dev *pdev, struct ne
sizeof(PI_CONSUMER_BLOCK) +
(PI_ALIGN_K_DESC_BLK - 1);
if (bp->kmalloced)
- pci_free_consistent(pdev, alloc_size, bp->kmalloced,
- bp->kmalloced_dma);
+ dma_free_coherent(bdev, alloc_size,
+ bp->kmalloced, bp->kmalloced_dma);
+
+ dfx_bus_uninit(dev);
+
+ dfx_get_bars(bdev, &bar_start, &bar_len);
+ if (dfx_use_mmio) {
+ iounmap(bp->base.mem);
+ release_mem_region(bar_start, bar_len);
+ } else
+ release_region(bar_start, bar_len);
+
+ if (dfx_bus_pci)
+ pci_disable_device(to_pci_dev(bdev));
+
free_netdev(dev);
}
-static void __devexit dfx_remove_one (struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- dfx_remove_one_pci_or_eisa(pdev, dev);
- pci_set_drvdata(pdev, NULL);
-}
+static int __devinit __unused dfx_dev_register(struct device *);
+static int __devexit __unused dfx_dev_unregister(struct device *);
-static struct pci_device_id dfx_pci_tbl[] = {
- { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_FDDI, PCI_ANY_ID, PCI_ANY_ID, },
- { 0, }
+#ifdef CONFIG_PCI
+static int __devinit dfx_pci_register(struct pci_dev *,
+ const struct pci_device_id *);
+static void __devexit dfx_pci_unregister(struct pci_dev *);
+
+static struct pci_device_id dfx_pci_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_FDDI) },
+ { }
};
-MODULE_DEVICE_TABLE(pci, dfx_pci_tbl);
+MODULE_DEVICE_TABLE(pci, dfx_pci_table);
-static struct pci_driver dfx_driver = {
+static struct pci_driver dfx_pci_driver = {
.name = "defxx",
- .probe = dfx_init_one,
- .remove = __devexit_p(dfx_remove_one),
- .id_table = dfx_pci_tbl,
+ .id_table = dfx_pci_table,
+ .probe = dfx_pci_register,
+ .remove = __devexit_p(dfx_pci_unregister),
};
-static int dfx_have_pci;
-static int dfx_have_eisa;
-
+static __devinit int dfx_pci_register(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ return dfx_register(&pdev->dev);
+}
-static void __exit dfx_eisa_cleanup(void)
+static void __devexit dfx_pci_unregister(struct pci_dev *pdev)
{
- struct net_device *dev = root_dfx_eisa_dev;
+ dfx_unregister(&pdev->dev);
+}
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_EISA
+static struct eisa_device_id dfx_eisa_table[] = {
+ { "DEC3001", DEFEA_PROD_ID_1 },
+ { "DEC3002", DEFEA_PROD_ID_2 },
+ { "DEC3003", DEFEA_PROD_ID_3 },
+ { "DEC3004", DEFEA_PROD_ID_4 },
+ { }
+};
+MODULE_DEVICE_TABLE(eisa, dfx_eisa_table);
+
+static struct eisa_driver dfx_eisa_driver = {
+ .id_table = dfx_eisa_table,
+ .driver = {
+ .name = "defxx",
+ .bus = &eisa_bus_type,
+ .probe = dfx_dev_register,
+ .remove = __devexit_p(dfx_dev_unregister),
+ },
+};
+#endif /* CONFIG_EISA */
+
+#ifdef CONFIG_TC
+static struct tc_device_id const dfx_tc_table[] = {
+ { "DEC ", "PMAF-FA " },
+ { "DEC ", "PMAF-FD " },
+ { "DEC ", "PMAF-FS " },
+ { "DEC ", "PMAF-FU " },
+ { }
+};
+MODULE_DEVICE_TABLE(tc, dfx_tc_table);
+
+static struct tc_driver dfx_tc_driver = {
+ .id_table = dfx_tc_table,
+ .driver = {
+ .name = "defxx",
+ .bus = &tc_bus_type,
+ .probe = dfx_dev_register,
+ .remove = __devexit_p(dfx_dev_unregister),
+ },
+};
+#endif /* CONFIG_TC */
- while (dev)
- {
- struct net_device *tmp;
- DFX_board_t *bp;
+static int __devinit __unused dfx_dev_register(struct device *dev)
+{
+ int status;
- bp = (DFX_board_t*)dev->priv;
- tmp = bp->next;
- dfx_remove_one_pci_or_eisa(NULL, dev);
- dev = tmp;
- }
+ status = dfx_register(dev);
+ if (!status)
+ get_device(dev);
+ return status;
}
-static int __init dfx_init(void)
+static int __devexit __unused dfx_dev_unregister(struct device *dev)
{
- int rc_pci, rc_eisa;
-
- rc_pci = pci_register_driver(&dfx_driver);
- if (rc_pci >= 0) dfx_have_pci = 1;
+ put_device(dev);
+ dfx_unregister(dev);
+ return 0;
+}
- rc_eisa = dfx_eisa_init();
- if (rc_eisa >= 0) dfx_have_eisa = 1;
- return ((rc_eisa < 0) ? 0 : rc_eisa) + ((rc_pci < 0) ? 0 : rc_pci);
+static int __devinit dfx_init(void)
+{
+ int status;
+
+ status = pci_register_driver(&dfx_pci_driver);
+ if (!status)
+ status = eisa_driver_register(&dfx_eisa_driver);
+ if (!status)
+ status = tc_register_driver(&dfx_tc_driver);
+ return status;
}
-static void __exit dfx_cleanup(void)
+static void __devexit dfx_cleanup(void)
{
- if (dfx_have_pci)
- pci_unregister_driver(&dfx_driver);
- if (dfx_have_eisa)
- dfx_eisa_cleanup();
-
+ tc_unregister_driver(&dfx_tc_driver);
+ eisa_driver_unregister(&dfx_eisa_driver);
+ pci_unregister_driver(&dfx_pci_driver);
}
module_init(dfx_init);
module_exit(dfx_cleanup);
MODULE_AUTHOR("Lawrence V. Stefani");
-MODULE_DESCRIPTION("DEC FDDIcontroller EISA/PCI (DEFEA/DEFPA) driver "
+MODULE_DESCRIPTION("DEC FDDIcontroller TC/EISA/PCI (DEFTA/DEFEA/DEFPA) driver "
DRV_VERSION " " DRV_RELDATE);
MODULE_LICENSE("GPL");
diff --git a/drivers/net/defxx.h b/drivers/net/defxx.h
index 2ce8f97253e..19a6f64df19 100644
--- a/drivers/net/defxx.h
+++ b/drivers/net/defxx.h
@@ -26,6 +26,7 @@
* 12-Sep-96 LVS Removed packet request header pointers.
* 04 Aug 2003 macro Converted to the DMA API.
* 23 Oct 2006 macro Big-endian host support.
+ * 14 Dec 2006 macro TURBOchannel support.
*/
#ifndef _DEFXX_H_
@@ -1471,9 +1472,17 @@ typedef union
#endif /* __BIG_ENDIAN */
+/* Define TC PDQ CSR offset and length */
+
+#define PI_TC_K_CSR_OFFSET 0x100000
+#define PI_TC_K_CSR_LEN 0x40 /* 64 bytes */
+
/* Define EISA controller register offsets */
-#define PI_ESIC_K_BURST_HOLDOFF 0x040
+#define PI_ESIC_K_CSR_IO_LEN 0x80 /* 128 bytes */
+
+#define PI_DEFEA_K_BURST_HOLDOFF 0x040
+
#define PI_ESIC_K_SLOT_ID 0xC80
#define PI_ESIC_K_SLOT_CNTRL 0xC84
#define PI_ESIC_K_MEM_ADD_CMP_0 0xC85
@@ -1488,14 +1497,14 @@ typedef union
#define PI_ESIC_K_MEM_ADD_LO_CMP_0 0xC8E
#define PI_ESIC_K_MEM_ADD_LO_CMP_1 0xC8F
#define PI_ESIC_K_MEM_ADD_LO_CMP_2 0xC90
-#define PI_ESIC_K_IO_CMP_0_0 0xC91
-#define PI_ESIC_K_IO_CMP_0_1 0xC92
-#define PI_ESIC_K_IO_CMP_1_0 0xC93
-#define PI_ESIC_K_IO_CMP_1_1 0xC94
-#define PI_ESIC_K_IO_CMP_2_0 0xC95
-#define PI_ESIC_K_IO_CMP_2_1 0xC96
-#define PI_ESIC_K_IO_CMP_3_0 0xC97
-#define PI_ESIC_K_IO_CMP_3_1 0xC98
+#define PI_ESIC_K_IO_ADD_CMP_0_0 0xC91
+#define PI_ESIC_K_IO_ADD_CMP_0_1 0xC92
+#define PI_ESIC_K_IO_ADD_CMP_1_0 0xC93
+#define PI_ESIC_K_IO_ADD_CMP_1_1 0xC94
+#define PI_ESIC_K_IO_ADD_CMP_2_0 0xC95
+#define PI_ESIC_K_IO_ADD_CMP_2_1 0xC96
+#define PI_ESIC_K_IO_ADD_CMP_3_0 0xC97
+#define PI_ESIC_K_IO_ADD_CMP_3_1 0xC98
#define PI_ESIC_K_IO_ADD_MASK_0_0 0xC99
#define PI_ESIC_K_IO_ADD_MASK_0_1 0xC9A
#define PI_ESIC_K_IO_ADD_MASK_1_0 0xC9B
@@ -1518,11 +1527,16 @@ typedef union
#define PI_ESIC_K_INPUT_PORT 0xCAC
#define PI_ESIC_K_OUTPUT_PORT 0xCAD
#define PI_ESIC_K_FUNCTION_CNTRL 0xCAE
-#define PI_ESIC_K_CSR_IO_LEN PI_ESIC_K_FUNCTION_CNTRL+1 /* always last reg + 1 */
-/* Define the value all drivers must write to the function control register. */
+/* Define the bits in the function control register. */
-#define PI_ESIC_K_FUNCTION_CNTRL_IO_ENB 0x03
+#define PI_FUNCTION_CNTRL_M_IOCS0 0x01
+#define PI_FUNCTION_CNTRL_M_IOCS1 0x02
+#define PI_FUNCTION_CNTRL_M_IOCS2 0x04
+#define PI_FUNCTION_CNTRL_M_IOCS3 0x08
+#define PI_FUNCTION_CNTRL_M_MEMCS0 0x10
+#define PI_FUNCTION_CNTRL_M_MEMCS1 0x20
+#define PI_FUNCTION_CNTRL_M_DMA 0x80
/* Define the bits in the slot control register. */
@@ -1540,6 +1554,10 @@ typedef union
#define PI_BURST_HOLDOFF_V_RESERVED 1
#define PI_BURST_HOLDOFF_V_MEM_MAP 0
+/* Define the implicit mask of the Memory Address Mask Register. */
+
+#define PI_MEM_ADD_MASK_M 0x3ff
+
/*
* Define the fields in the IO Compare registers.
* The driver must initialize the slot field with the slot ID shifted by the
@@ -1577,6 +1595,7 @@ typedef union
#define DEFEA_PROD_ID_1 0x0130A310 /* DEC product 300, rev 1 */
#define DEFEA_PROD_ID_2 0x0230A310 /* DEC product 300, rev 2 */
#define DEFEA_PROD_ID_3 0x0330A310 /* DEC product 300, rev 3 */
+#define DEFEA_PROD_ID_4 0x0430A310 /* DEC product 300, rev 4 */
/**********************************************/
/* Digital PFI Specification v1.0 Definitions */
@@ -1633,12 +1652,6 @@ typedef union
#define PFI_STATUS_V_FIFO_EMPTY 1
#define PFI_STATUS_V_DMA_IN_PROGRESS 0
-#define DFX_MAX_EISA_SLOTS 16 /* maximum number of EISA slots to scan */
-#define DFX_MAX_NUM_BOARDS 8 /* maximum number of adapters supported */
-
-#define DFX_BUS_TYPE_PCI 0 /* type code for DEC FDDIcontroller/PCI */
-#define DFX_BUS_TYPE_EISA 1 /* type code for DEC FDDIcontroller/EISA */
-
#define DFX_FC_PRH2_PRH1_PRH0 0x54003820 /* Packet Request Header bytes + FC */
#define DFX_PRH0_BYTE 0x20 /* Packet Request Header byte 0 */
#define DFX_PRH1_BYTE 0x38 /* Packet Request Header byte 1 */
@@ -1756,10 +1769,11 @@ typedef struct DFX_board_tag
/* Store device, bus-specific, and parameter information for this adapter */
struct net_device *dev; /* pointer to device structure */
- struct net_device *next;
- u32 bus_type; /* bus type (0 == PCI, 1 == EISA) */
- u16 base_addr; /* base I/O address (same as dev->base_addr) */
- struct pci_dev * pci_dev;
+ union {
+ void __iomem *mem;
+ int port;
+ } base; /* base address */
+ struct device *bus_dev;
u32 full_duplex_enb; /* FDDI Full Duplex enable (1 == on, 2 == off) */
u32 req_ttrt; /* requested TTRT value (in 80ns units) */
u32 burst_size; /* adapter burst size (enumerated) */