diff options
46 files changed, 815 insertions, 255 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index aa1d400d721..6783c2e5512 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -740,7 +740,7 @@ config XIP_PHYS_ADDR endmenu -if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP) +if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX ) menu "CPU Frequency scaling" @@ -767,6 +767,15 @@ config CPU_FREQ_INTEGRATOR If in doubt, say Y. +config CPU_FREQ_IMX + tristate "CPUfreq driver for i.MX CPUs" + depends on ARCH_IMX && CPU_FREQ + default n + help + This enables the CPUfreq driver for i.MX CPUs. + + If in doubt, say N. + endmenu endif @@ -945,6 +954,8 @@ source "drivers/video/Kconfig" source "sound/Kconfig" +source "drivers/hid/Kconfig" + source "drivers/usb/Kconfig" source "drivers/mmc/Kconfig" diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 3173924a9b6..e8f74363328 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -331,6 +331,19 @@ CALL(sys_mbind) /* 320 */ CALL(sys_get_mempolicy) CALL(sys_set_mempolicy) + CALL(sys_openat) + CALL(sys_mkdirat) + CALL(sys_mknodat) +/* 325 */ CALL(sys_fchownat) + CALL(sys_futimesat) + CALL(sys_fstatat64) + CALL(sys_unlinkat) + CALL(sys_renameat) +/* 330 */ CALL(sys_linkat) + CALL(sys_symlinkat) + CALL(sys_readlinkat) + CALL(sys_fchmodat) + CALL(sys_faccessat) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index bda0748ffb0..d994561816a 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -22,30 +22,31 @@ #include <asm/thread_info.h> #include <asm/system.h> -#define KERNEL_RAM_ADDR (PAGE_OFFSET + TEXT_OFFSET) +#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET) +#define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET) /* * swapper_pg_dir is the virtual address of the initial page table. - * We place the page tables 16K below KERNEL_RAM_ADDR. Therefore, we must - * make sure that KERNEL_RAM_ADDR is correctly set. Currently, we expect + * We place the page tables 16K below KERNEL_RAM_VADDR. Therefore, we must + * make sure that KERNEL_RAM_VADDR is correctly set. Currently, we expect * the least significant 16 bits to be 0x8000, but we could probably - * relax this restriction to KERNEL_RAM_ADDR >= PAGE_OFFSET + 0x4000. + * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000. */ -#if (KERNEL_RAM_ADDR & 0xffff) != 0x8000 -#error KERNEL_RAM_ADDR must start at 0xXXXX8000 +#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000 +#error KERNEL_RAM_VADDR must start at 0xXXXX8000 #endif .globl swapper_pg_dir - .equ swapper_pg_dir, KERNEL_RAM_ADDR - 0x4000 + .equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000 .macro pgtbl, rd - ldr \rd, =(__virt_to_phys(KERNEL_RAM_ADDR - 0x4000)) + ldr \rd, =(KERNEL_RAM_PADDR - 0x4000) .endm #ifdef CONFIG_XIP_KERNEL #define TEXTADDR XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) #else -#define TEXTADDR KERNEL_RAM_ADDR +#define TEXTADDR KERNEL_RAM_VADDR #endif /* diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 238dd9b6db8..cf2bd424280 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -354,9 +354,6 @@ static void __init setup_processor(void) #ifndef CONFIG_ARM_THUMB elf_hwcap &= ~HWCAP_THUMB; #endif -#ifndef CONFIG_VFP - elf_hwcap &= ~HWCAP_VFP; -#endif cpu_proc_init(); } diff --git a/arch/arm/mach-at91rm9200/at91sam9260_devices.c b/arch/arm/mach-at91rm9200/at91sam9260_devices.c index a6c596dc451..f42d3a40ec3 100644 --- a/arch/arm/mach-at91rm9200/at91sam9260_devices.c +++ b/arch/arm/mach-at91rm9200/at91sam9260_devices.c @@ -18,6 +18,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/at91sam9260.h> #include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91sam9260_matrix.h> #include "generic.h" diff --git a/arch/arm/mach-at91rm9200/board-sam9260ek.c b/arch/arm/mach-at91rm9200/board-sam9260ek.c index ffca9bdec37..da5d58ac870 100644 --- a/arch/arm/mach-at91rm9200/board-sam9260ek.c +++ b/arch/arm/mach-at91rm9200/board-sam9260ek.c @@ -119,6 +119,7 @@ static struct spi_board_info ek_spi_devices[] = { * MACB Ethernet device */ static struct __initdata eth_platform_data ek_macb_data = { + .phy_irq_pin = AT91_PIN_PA7, .is_rmii = 1, }; diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 0b27d79f2ef..02272aa36e9 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -9,6 +9,8 @@ obj-y += irq.o time.o dma.o generic.o +obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o + # Specific board support obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c new file mode 100644 index 00000000000..ac5f9989566 --- /dev/null +++ b/arch/arm/mach-imx/cpufreq.c @@ -0,0 +1,287 @@ +/* + * cpu.c: clock scaling for the iMX + * + * Copyright (C) 2000 2001, The Delft University of Technology + * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de> + * Copyright (C) 2006 Inky Lung <ilung@cwlinux.com> + * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com> + * + * Based on SA1100 version written by: + * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version + * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl): + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +/*#define DEBUG*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <asm/system.h> + +#include <asm/hardware.h> + +#include "generic.h" + +#ifndef __val2mfld +#define __val2mfld(mask,val) (((mask)&~((mask)<<1))*(val)&(mask)) +#endif +#ifndef __mfld2val +#define __mfld2val(mask,val) (((val)&(mask))/((mask)&~((mask)<<1))) +#endif + +#define CR_920T_CLOCK_MODE 0xC0000000 +#define CR_920T_FASTBUS_MODE 0x00000000 +#define CR_920T_ASYNC_MODE 0xC0000000 + +static u32 mpctl0_at_boot; + +static void imx_set_async_mode(void) +{ + adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE); +} + +static void imx_set_fastbus_mode(void) +{ + adjust_cr(CR_920T_CLOCK_MODE, CR_920T_FASTBUS_MODE); +} + +static void imx_set_mpctl0(u32 mpctl0) +{ + unsigned long flags; + + if (mpctl0 == 0) { + local_irq_save(flags); + CSCR &= ~CSCR_MPEN; + local_irq_restore(flags); + return; + } + + local_irq_save(flags); + MPCTL0 = mpctl0; + CSCR |= CSCR_MPEN; + local_irq_restore(flags); +} + +/** + * imx_compute_mpctl - compute new PLL parameters + * @new_mpctl: pointer to location assigned by new PLL control register value + * @cur_mpctl: current PLL control register parameters + * @freq: required frequency in Hz + * @relation: is one of %CPUFREQ_RELATION_L (supremum) + * and %CPUFREQ_RELATION_H (infimum) + */ +long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, unsigned long freq, int relation) +{ + u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512); + u32 mfi; + u32 mfn; + u32 mfd; + u32 pd; + unsigned long long ll; + long l; + long quot; + + /* Fdppl=2*Fref*(MFI+MFN/(MFD+1))/(PD+1) */ + /* PD=<0,15>, MFD=<1,1023>, MFI=<5,15> MFN=<0,1022> */ + + if (cur_mpctl) { + mfd = ((cur_mpctl >> 16) & 0x3ff) + 1; + pd = ((cur_mpctl >> 26) & 0xf) + 1; + } else { + pd=2; mfd=313; + } + + /* pd=2; mfd=313; mfi=8; mfn=183; */ + /* (MFI+MFN/(MFD)) = Fdppl / (2*Fref) * (PD); */ + + quot = (f_ref + (1 << 9)) >> 10; + l = (freq * pd + quot) / (2 * quot); + mfi = l >> 10; + mfn = ((l & ((1 << 10) - 1)) * mfd + (1 << 9)) >> 10; + + mfd -= 1; + pd -= 1; + + *new_mpctl = ((mfi & 0xf) << 10) | (mfn & 0x3ff) | ((mfd & 0x3ff) << 16) + | ((pd & 0xf) << 26); + + ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) ); + quot = (pd+1) * (1<<16); + ll += quot / 2; + do_div(ll, quot); + freq = ll; + + pr_debug(KERN_DEBUG "imx: new PLL parameters pd=%d mfd=%d mfi=%d mfn=%d, freq=%ld\n", + pd, mfd, mfi, mfn, freq); + + return freq; +} + + +static int imx_verify_speed(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -EINVAL; + + cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); + + return 0; +} + +static unsigned int imx_get_speed(unsigned int cpu) +{ + unsigned int freq; + unsigned int cr; + unsigned int cscr; + unsigned int bclk_div; + + if (cpu) + return 0; + + cscr = CSCR; + bclk_div = __mfld2val(CSCR_BCLK_DIV, cscr) + 1; + cr = get_cr(); + + if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) { + freq = imx_get_system_clk(); + freq = (freq + bclk_div/2) / bclk_div; + } else { + freq = imx_get_mcu_clk(); + if (cscr & CSCR_MPU_PRESC) + freq /= 2; + } + + freq = (freq + 500) / 1000; + + return freq; +} + +static int imx_set_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_freqs freqs; + u32 mpctl0 = 0; + u32 cscr; + unsigned long flags; + long freq; + long sysclk; + unsigned int bclk_div = 1; + + freq = target_freq * 1000; + + pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n", + freq, mpctl0_at_boot); + + sysclk = imx_get_system_clk(); + + if (freq > sysclk + 1000000) { + freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, freq, relation); + if (freq < 0) { + printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq); + return -EINVAL; + } + } else { + if(freq + 1000 < sysclk) { + if (relation == CPUFREQ_RELATION_L) + bclk_div = (sysclk - 1000) / freq; + else + bclk_div = (sysclk + freq + 1000) / freq; + + if(bclk_div > 16) + bclk_div = 16; + } + freq = (sysclk + bclk_div / 2) / bclk_div; + } + + freqs.old = imx_get_speed(0); + freqs.new = (freq + 500) / 1000; + freqs.cpu = 0; + freqs.flags = 0; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + local_irq_save(flags); + + imx_set_fastbus_mode(); + + imx_set_mpctl0(mpctl0); + + cscr = CSCR; + cscr &= ~CSCR_BCLK_DIV; + cscr |= __val2mfld(CSCR_BCLK_DIV, bclk_div - 1); + CSCR = cscr; + + if(mpctl0) { + CSCR |= CSCR_MPLL_RESTART; + + /* Wait until MPLL is stablized */ + while( CSCR & CSCR_MPLL_RESTART ); + + imx_set_async_mode(); + } + + local_irq_restore(flags); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + pr_debug(KERN_INFO "imx: set frequency %ld Hz, running from %s\n", + freq, mpctl0? "MPLL": "SPLL"); + + return 0; +} + +static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy) +{ + printk(KERN_INFO "i.MX cpu freq change driver v1.0\n"); + + if (policy->cpu != 0) + return -EINVAL; + + policy->cur = policy->min = policy->max = imx_get_speed(0); + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.min_freq = 8000; + policy->cpuinfo.max_freq = 200000; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + return 0; +} + +static struct cpufreq_driver imx_driver = { + .flags = CPUFREQ_STICKY, + .verify = imx_verify_speed, + .target = imx_set_target, + .get = imx_get_speed, + .init = imx_cpufreq_driver_init, + .name = "imx", +}; + +static int __init imx_cpufreq_init(void) +{ + + mpctl0_at_boot = 0; + + if((CSCR & CSCR_MPEN) && + ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE)) + mpctl0_at_boot = MPCTL0; + + return cpufreq_register_driver(&imx_driver); +} + +arch_initcall(imx_cpufreq_init); + diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c index 0993336c0b5..5773b55ef4a 100644 --- a/arch/arm/mach-netx/time.c +++ b/arch/arm/mach-netx/time.c @@ -19,6 +19,8 @@ #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clocksource.h> #include <asm/hardware.h> #include <asm/io.h> @@ -26,15 +28,6 @@ #include <asm/arch/netx-regs.h> /* - * Returns number of us since last clock interrupt. Note that interrupts - * will have been disabled by do_gettimeoffset() - */ -static unsigned long netx_gettimeoffset(void) -{ - return readl(NETX_GPIO_COUNTER_CURRENT(0)) / 100; -} - -/* * IRQ handler for the timer */ static irqreturn_t @@ -43,6 +36,7 @@ netx_timer_interrupt(int irq, void *dev_id) write_seqlock(&xtime_lock); timer_tick(); + write_sequnlock(&xtime_lock); /* acknowledge interrupt */ @@ -51,13 +45,26 @@ netx_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } - static struct irqaction netx_timer_irq = { .name = "NetX Timer Tick", .flags = IRQF_DISABLED | IRQF_TIMER, .handler = netx_timer_interrupt, }; +cycle_t netx_get_cycles(void) +{ + return readl(NETX_GPIO_COUNTER_CURRENT(1)); +} + +static struct clocksource clocksource_netx = { + .name = "netx_timer", + .rating = 200, + .read = netx_get_cycles, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .is_continuous = 1, +}; + /* * Set up timer interrupt */ @@ -80,9 +87,20 @@ static void __init netx_timer_init(void) NETX_GPIO_COUNTER_CTRL(0)); setup_irq(NETX_IRQ_TIMER0, &netx_timer_irq); + + /* Setup timer one for clocksource */ + writel(0, NETX_GPIO_COUNTER_CTRL(1)); + writel(0, NETX_GPIO_COUNTER_CURRENT(1)); + writel(0xFFFFFFFF, NETX_GPIO_COUNTER_MAX(1)); + + writel(NETX_GPIO_COUNTER_CTRL_RUN, + NETX_GPIO_COUNTER_CTRL(1)); + + clocksource_netx.mult = + clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_netx.shift); + clocksource_register(&clocksource_netx); } struct sys_timer netx_timer = { - .init = netx_timer_init, - .offset = netx_gettimeoffset, + .init = netx_timer_init, }; diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index b9146686102..3775b8f3842 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -18,6 +18,7 @@ #include <linux/signal.h> #include <linux/errno.h> #include <linux/sched.h> +#include <linux/clocksource.h> #include <asm/system.h> #include <asm/hardware.h> @@ -48,27 +49,6 @@ static int pxa_set_rtc(void) return 0; } -/* IRQs are disabled before entering here from do_gettimeofday() */ -static unsigned long pxa_gettimeoffset (void) -{ - long ticks_to_match, elapsed, usec; - - /* Get ticks before next timer match */ - ticks_to_match = OSMR0 - OSCR; - - /* We need elapsed ticks since last match */ - elapsed = LATCH - ticks_to_match; - - /* don't get fooled by the workaround in pxa_timer_interrupt() */ - if (elapsed <= 0) - return 0; - - /* Now convert them to usec */ - usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH; - - return usec; -} - #ifdef CONFIG_NO_IDLE_HZ static unsigned long initial_match; static int match_posponed; @@ -121,6 +101,20 @@ static struct irqaction pxa_timer_irq = { .handler = pxa_timer_interrupt, }; +cycle_t pxa_get_cycles(void) +{ + return OSCR; +} + +static struct clocksource clocksource_pxa = { + .name = "pxa_timer", + .rating = 200, + .read = pxa_get_cycles, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .is_continuous = 1, +}; + static void __init pxa_timer_init(void) { struct timespec tv; @@ -139,6 +133,14 @@ static void __init pxa_timer_init(void) OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ OSMR0 = OSCR + LATCH; /* set initial match */ local_irq_restore(flags); + + /* on PXA OSCR runs continiously and is not written to, so we can use it + * as clock source directly. + */ + clocksource_pxa.mult = + clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_pxa.shift); + clocksource_register(&clocksource_pxa); + } #ifdef CONFIG_NO_IDLE_HZ @@ -211,7 +213,6 @@ struct sys_timer pxa_timer = { .init = pxa_timer_init, .suspend = pxa_timer_suspend, .resume = pxa_timer_resume, - .offset = pxa_gettimeoffset, #ifdef CONFIG_NO_IDLE_HZ .dyn_tick = &pxa_dyn_tick, #endif diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index c1827d021ba..119c64b7223 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -393,10 +393,6 @@ static struct pxafb_mach_info sharp_lcd = { .pxafb_backlight_power = board_backlight_power, }; -static void __init trizeps4_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) -{ -} - static void __init trizeps4_init(void) { platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices)); @@ -469,7 +465,6 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = TRIZEPS4_SDRAM_BASE + 0x100, - .fixup = trizeps4_fixup, .init_machine = trizeps4_init, .map_io = trizeps4_map_io, .init_irq = pxa_init_irq, diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 17f5a43acdb..54ecdaa373d 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -1,5 +1,15 @@ /* * linux/arch/arm/mach-sa1100/jornada720.c + * + * HP Jornada720 init code + * + * Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl> + * Copyright (C) 2005 Michael Gernoth <michael@gernoth.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * */ #include <linux/init.h> @@ -10,13 +20,13 @@ #include <linux/ioport.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <video/s1d13xxxfb.h> #include <asm/hardware.h> #include <asm/hardware/sa1111.h> #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/setup.h> - #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> @@ -24,13 +34,170 @@ #include "generic.h" +/* + * HP Documentation referred in this file: + * http://www.jlime.com/downloads/development/docs/jornada7xx/jornada720.txt + */ + +/* line 110 of HP's doc */ +#define TUCR_VAL 0x20000400 + +/* memory space (line 52 of HP's doc) */ +#define SA1111REGSTART 0x40000000 +#define SA1111REGLEN 0x00001fff +#define EPSONREGSTART 0x48000000 +#define EPSONREGLEN 0x00100000 +#define EPSONFBSTART 0x48200000 +/* 512kB framebuffer */ +#define EPSONFBLEN 512*1024 + +static struct s1d13xxxfb_regval s1d13xxxfb_initregs[] = { + /* line 344 of HP's doc */ + {0x0001,0x00}, // Miscellaneous Register + {0x01FC,0x00}, // Display Mode Register + {0x0004,0x00}, // General IO Pins Configuration Register 0 + {0x0005,0x00}, // General IO Pins Configuration Register 1 + {0x0008,0x00}, // General IO Pins Control Register 0 + {0x0009,0x00}, // General IO Pins Control Register 1 + {0x0010,0x01}, // Memory Clock Configuration Register + {0x0014,0x11}, // LCD Pixel Clock Configuration Register + {0x0018,0x01}, // CRT/TV Pixel Clock Configuration Register + {0x001C,0x01}, // MediaPlug Clock Configuration Register + {0x001E,0x01}, // CPU To Memory Wait State Select Register + {0x0020,0x00}, // Memory Configuration Register + {0x0021,0x45}, // DRAM Refresh Rate Register + {0x002A,0x01}, // DRAM Timings Control Register 0 + {0x002B,0x03}, // DRAM Timings Control Register 1 + {0x0030,0x1c}, // Panel Type Register + {0x0031,0x00}, // MOD Rate Register + {0x0032,0x4F}, // LCD Horizontal Display Width Register + {0x0034,0x07}, // LCD Horizontal Non-Display Period Register + {0x0035,0x01}, // TFT FPLINE Start Position Register + {0x0036,0x0B}, // TFT FPLINE Pulse Width Register + {0x0038,0xEF}, // LCD Vertical Display Height Register 0 + {0x0039,0x00}, // LCD Vertical Display Height Register 1 + {0x003A,0x13}, // LCD Vertical Non-Display Period Register + {0x003B,0x0B}, // TFT FPFRAME Start Position Register + {0x003C,0x01}, // TFT FPFRAME Pulse Width Register + {0x0040,0x05}, // LCD Display Mode Register (2:4bpp,3:8bpp,5:16bpp) + {0x0041,0x00}, // LCD Miscellaneous Register + {0x0042,0x00}, // LCD Display Start Address Register 0 + {0x0043,0x00}, // LCD Display Start Address Register 1 + {0x0044,0x00}, // LCD Display Start Address Register 2 + {0x0046,0x80}, // LCD Memory Address Offset Register 0 + {0x0047,0x02}, // LCD Memory Address Offset Register 1 + {0x0048,0x00}, // LCD Pixel Panning Register + {0x004A,0x00}, // LCD Display FIFO High Threshold Control Register + {0x004B,0x00}, // LCD Display FIFO Low Threshold Control Register + {0x0050,0x4F}, // CRT/TV Horizontal Display Width Register + {0x0052,0x13}, // CRT/TV Horizontal Non-Display Period Register + {0x0053,0x01}, // CRT/TV HRTC Start Position Register + {0x0054,0x0B}, // CRT/TV HRTC Pulse Width Register + {0x0056,0xDF}, // CRT/TV Vertical Display Height Register 0 + {0x0057,0x01}, // CRT/TV Vertical Display Height Register 1 + {0x0058,0x2B}, // CRT/TV Vertical Non-Display Period Register + {0x0059,0x09}, // CRT/TV VRTC Start Position Register + {0x005A,0x01}, // CRT/TV VRTC Pulse Width Register + {0x005B,0x10}, // TV Output Control Register + {0x0060,0x03}, // CRT/TV Display Mode Register (2:4bpp,3:8bpp,5:16bpp) + {0x0062,0x00}, // CRT/TV Display Start Address Register 0 + {0x0063,0x00}, // CRT/TV Display Start Address Register 1 + {0x0064,0x00}, // CRT/TV Display Start Address Register 2 + {0x0066,0x40}, // CRT/TV Memory Address Offset Register 0 + {0x0067,0x01}, // CRT/TV Memory Address Offset Register 1 + {0x0068,0x00}, // CRT/TV Pixel Panning Register + {0x006A,0x00}, // CRT/TV Display FIFO High Threshold Control Register + {0x006B,0x00}, // CRT/TV Display FIFO Low Threshold Control Register + {0x0070,0x00}, // LCD Ink/Cursor Control Register + {0x0071,0x01}, // LCD Ink/Cursor Start Address Register + {0x0072,0x00}, // LCD Cursor X Position Register 0 + {0x0073,0x00}, // LCD Cursor X Position Register 1 + {0x0074,0x00}, // LCD Cursor Y Position Register 0 + {0x0075,0x00}, // LCD Cursor Y Position Register 1 + {0x0076,0x00}, // LCD Ink/Cursor Blue Color 0 Register + {0x0077,0x00}, // LCD Ink/Cursor Green Color 0 Register + {0x0078,0x00}, // LCD Ink/Cursor Red Color 0 Register + {0x007A,0x1F}, // LCD Ink/Cursor Blue Color 1 Register + {0x007B,0x3F}, // LCD Ink/Cursor Green Color 1 Register + {0x007C,0x1F}, // LCD Ink/Cursor Red Color 1 Register + {0x007E,0x00}, // LCD Ink/Cursor FIFO Threshold Register + {0x0080,0x00}, // CRT/TV Ink/Cursor Control Register + {0x0081,0x01}, // CRT/TV Ink/Cursor Start Address Register + {0x0082,0x00}, // CRT/TV Cursor X Position Register 0 + {0x0083,0x00}, // CRT/TV Cursor X Position Register 1 + {0x0084,0x00}, // CRT/TV Cursor Y Position Register 0 + {0x0085,0x00}, // CRT/TV Cursor Y Position Register 1 + {0x0086,0x00}, // CRT/TV Ink/Cursor Blue Color 0 Register + {0x0087,0x00}, // CRT/TV Ink/Cursor Green Color 0 Register + {0x0088,0x00}, // CRT/TV Ink/Cursor Red Color 0 Register + {0x008A,0x1F}, // CRT/TV Ink/Cursor Blue Color 1 Register + {0x008B,0x3F}, // CRT/TV Ink/Cursor Green Color 1 Register + {0x008C,0x1F}, // CRT/TV Ink/Cursor Red Color 1 Register + {0x008E,0x00}, // CRT/TV Ink/Cursor FIFO Threshold Register + {0x0100,0x00}, // BitBlt Control Register 0 + {0x0101,0x00}, // BitBlt Control Register 1 + {0x0102,0x00}, // BitBlt ROP Code/Color Expansion Register + {0x0103,0x00}, // BitBlt Operation Register + {0x0104,0x00}, // BitBlt Source Start Address Register 0 + {0x0105,0x00}, // BitBlt Source Start Address Register 1 + {0x0106,0x00}, // BitBlt Source Start Address Register 2 + {0x0108,0x00}, // BitBlt Destination Start Address Register 0 + {0x0109,0x00}, // BitBlt Destination Start Address Register 1 + {0x010A,0x00}, // BitBlt Destination Start Address Register 2 + {0x010C,0x00}, // BitBlt Memory Address Offset Register 0 + {0x010D,0x00}, // BitBlt Memory Address Offset Register 1 + {0x0110,0x00}, // BitBlt Width Register 0 + {0x0111,0x00}, // BitBlt Width Register 1 + {0x0112,0x00}, // BitBlt Height Register 0 + {0x0113,0x00}, // BitBlt Height Register 1 + {0x0114,0x00}, // BitBlt Background Color Register 0 + {0x0115,0x00}, // BitBlt Background Color Register 1 + {0x0118,0x00}, // BitBlt Foreground Color Register 0 + {0x0119,0x00}, // BitBlt Foreground Color Register 1 + {0x01E0,0x00}, // Look-Up Table Mode Register + {0x01E2,0x00}, // Look-Up Table Address Register + /* not sure, wouldn't like to mess with the driver */ + {0x01E4,0x00}, // Look-Up Table Data Register + /* jornada doc says 0x00, but I trust the driver */ + {0x01F0,0x10}, // Power Save Configuration Register + {0x01F1,0x00}, // Power Save Status Register + {0x01F4,0x00}, // CPU-to-Memory Access Watchdog Timer Register + {0x01FC,0x01}, // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT) +}; + +static struct s1d13xxxfb_pdata s1d13xxxfb_data = { + .initregs = s1d13xxxfb_initregs, + .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs), + .platform_init_video = NULL +}; -#define JORTUCR_VAL 0x20000400 +static struct resource s1d13xxxfb_resources[] = { + [0] = { + .start = EPSONFBSTART, + .end = EPSONFBSTART + EPSONFBLEN, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = EPSONREGSTART, + .end = EPSONREGSTART + EPSONREGLEN, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device s1d13xxxfb_device = { + .name = S1D_DEVICENAME, + .id = 0, + .dev = { + .platform_data = &s1d13xxxfb_data, + }, + .num_resources = ARRAY_SIZE(s1d13xxxfb_resources), + .resource = s1d13xxxfb_resources, +}; static struct resource sa1111_resources[] = { [0] = { - .start = 0x40000000, - .end = 0x40001fff, + .start = SA1111REGSTART, + .end = SA1111REGSTART + SA1111REGLEN, .flags = IORESOURCE_MEM, }, [1] = { @@ -53,18 +220,32 @@ static struct platform_device sa1111_device = { .resource = sa1111_resources, }; +static struct platform_device jornada720_mcu_device = { + .name = "jornada720_mcu", + .id = -1, +}; + static struct platform_device *devices[] __initdata = { &sa1111_device, + &jornada720_mcu_device, + &s1d13xxxfb_device, }; +/* a stub for now, we theoretically cannot suspend without a flashboard */ +int pm_suspend(suspend_state_t state) +{ + return -1; +} + static int __init jornada720_init(void) { int ret = -ENODEV; if (machine_is_jornada720()) { GPDR |= GPIO_GPIO20; - TUCR = JORTUCR_VAL; /* set the oscillator out to the SA-1101 */ - + /* oscillator setup (line 116 of HP's doc) */ + TUCR = TUCR_VAL; + /* resetting SA1111 (line 118 of HP's doc) */ GPSR = GPIO_GPIO20; udelay(1); GPCR = GPIO_GPIO20; @@ -72,10 +253,6 @@ static int __init jornada720_init(void) GPSR = GPIO_GPIO20; udelay(20); - /* LDD4 is speaker, LDD3 is microphone */ - PPSR &= ~(PPC_LDD3 | PPC_LDD4); - PPDR |= PPC_LDD3 | PPC_LDD4; - ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } return ret; @@ -85,19 +262,19 @@ arch_initcall(jornada720_init); static struct map_desc jornada720_io_desc[] __initdata = { { /* Epson registers */ - .virtual = 0xf0000000, - .pfn = __phys_to_pfn(0x48000000), - .length = 0x00100000, + .virtual = 0xf0000000, + .pfn = __phys_to_pfn(EPSONREGSTART), + .length = EPSONREGLEN, .type = MT_DEVICE }, { /* Epson frame buffer */ - .virtual = 0xf1000000, - .pfn = __phys_to_pfn(0x48200000), - .length = 0x00100000, + .virtual = 0xf1000000, + .pfn = __phys_to_pfn(EPSONFBSTART), + .length = EPSONFBLEN, .type = MT_DEVICE }, { /* SA-1111 */ - .virtual = 0xf4000000, - .pfn = __phys_to_pfn(0x40000000), - .length = 0x00100000, + .virtual = 0xf4000000, + .pfn = __phys_to_pfn(SA1111REGSTART), + .length = SA1111REGLEN, .type = MT_DEVICE } }; @@ -106,7 +283,7 @@ static void __init jornada720_map_io(void) { sa1100_map_io(); iotable_init(jornada720_io_desc, ARRAY_SIZE(jornada720_io_desc)); - + sa1100_register_uart(0, 3); sa1100_register_uart(1, 1); } @@ -116,7 +293,7 @@ static struct mtd_partition jornada720_partitions[] = { .name = "JORNADA720 boot firmware", .size = 0x00040000, .offset = 0, - .mask_flags = MTD_WRITEABLE, /* force read-only */ + .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { .name = "JORNADA720 kernel", .size = 0x000c0000, @@ -139,7 +316,7 @@ static struct mtd_partition jornada720_partitions[] = { .offset = 0x00540000, }, { .name = "JORNADA720 usr local", - .size = 0, /* will expand to the end of the flash */ + .size = 0, /* will expand to the end of the flash */ .offset = 0x00d00000, } }; @@ -147,10 +324,12 @@ static struct mtd_partition jornada720_partitions[] = { static void jornada720_set_vpp(int vpp) { if (vpp) - PPSR |= 0x80; + /* enabling flash write (line 470 of HP's doc) */ + PPSR |= PPC_LDD7; else - PPSR &= ~0x80; - PPDR |= 0x80; + /* disabling flash write (line 470 of HP's doc) */ + PPSR &= ~PPC_LDD7; + PPDR |= PPC_LDD7; } static struct flash_platform_data jornada720_flash_data = { diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c index b797217e82b..6a9c362fef5 100644 --- a/arch/arm/mm/consistent.c +++ b/arch/arm/mm/consistent.c @@ -238,7 +238,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, * x86 does not mark the pages reserved... */ SetPageReserved(page); - set_pte(pte, mk_pte(page, prot)); + set_pte_ext(pte, mk_pte(page, prot), 0); page++; pte++; off++; diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index df1645e14b4..408b05ae6b9 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -71,7 +71,7 @@ void v4_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr) { spin_lock(&minicache_lock); - set_pte(TOP_PTE(0xffff8000), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot)); + set_pte_ext(TOP_PTE(0xffff8000), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot), 0); flush_tlb_kernel_page(0xffff8000); mc_copy_user_page((void *)0xffff8000, kto); diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index 3d0d3a963d2..865777dec16 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -70,8 +70,8 @@ static void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned lo */ spin_lock(&v6_lock); - set_pte(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, PAGE_KERNEL)); - set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, PAGE_KERNEL)); + set_pte_ext(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, PAGE_KERNEL), 0); + set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, PAGE_KERNEL), 0); from = from_address + (offset << PAGE_SHIFT); to = to_address + (offset << PAGE_SHIFT); @@ -110,7 +110,7 @@ static void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr) */ spin_lock(&v6_lock); - set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, PAGE_KERNEL)); + set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, PAGE_KERNEL), 0); flush_tlb_kernel_page(to); clear_page((void *)to); diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index 84ebe0aa379..aea5da72359 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -93,7 +93,7 @@ void xscale_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr) { spin_lock(&minicache_lock); - set_pte(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot)); + set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot), 0); flush_tlb_kernel_page(COPYPAGE_MINICACHE); mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto); diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 7fc1b35a674..cf95c5d0ce4 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -61,7 +61,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address) if (pte_present(entry) && pte_val(entry) & shared_pte_mask) { flush_cache_page(vma, address, pte_pfn(entry)); pte_val(entry) &= ~shared_pte_mask; - set_pte(pte, entry); + set_pte_at(vma->vm_mm, address, pte, entry); flush_tlb_page(vma, address); ret = 1; } diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 454205b789d..628348c9f6c 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -26,7 +26,7 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT); const int zero = 0; - set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL)); + set_pte_ext(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL), 0); flush_tlb_kernel_page(to); asm( "mcrr p15, 0, %1, %0, c14\n" diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 46544059279..3bb3951920b 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -38,89 +38,71 @@ */ #define VM_ARM_SECTION_MAPPING 0x80000000 -static inline void -remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, - unsigned long phys_addr, pgprot_t pgprot) +static int remap_area_pte(pmd_t *pmd, unsigned long addr, unsigned long end, + unsigned long phys_addr, pgprot_t prot) { - unsigned long end; + pte_t *pte; + + pte = pte_alloc_kernel(pmd, addr); + if (!pte) + return -ENOMEM; - address &= ~PMD_MASK; - end = address + size; - if (end > PMD_SIZE) - end = PMD_SIZE; - BUG_ON(address >= end); do { if (!pte_none(*pte)) goto bad; - set_pte(pte, pfn_pte(phys_addr >> PAGE_SHIFT, pgprot)); - address += PAGE_SIZE; + set_pte_ext(pte, pfn_pte(phys_addr >> PAGE_SHIFT, prot), 0); phys_addr += PAGE_SIZE; - pte++; - } while (address && (address < end)); - return; + } while (pte++, addr += PAGE_SIZE, addr != end); + return 0; bad: - printk("remap_area_pte: page already exists\n"); + printk(KERN_CRIT "remap_area_pte: page already exists\n"); BUG(); } -static inline int -remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size, - unsigned long phys_addr, unsigned long flags) +static inline int remap_area_pmd(pgd_t *pgd, unsigned long addr, + unsigned long end, unsigned long phys_addr, + pgprot_t prot) { - unsigned long end; - pgprot_t pgprot; - - address &= ~PGDIR_MASK; - end = address + size; + unsigned long next; + pmd_t *pmd; + int ret = 0; - if (end > PGDIR_SIZE) - end = PGDIR_SIZE; + pmd = pmd_alloc(&init_mm, pgd, addr); + if (!pmd) + return -ENOMEM; - phys_addr -= address; - BUG_ON(address >= end); - - pgprot = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_WRITE | flags); do { - pte_t * pte = pte_alloc_kernel(pmd, address); - if (!pte) - return -ENOMEM; - remap_area_pte(pte, address, end - address, address + phys_addr, pgprot); - address = (address + PMD_SIZE) & PMD_MASK; - pmd++; - } while (address && (address < end)); - return 0; + next = pmd_addr_end(addr, end); + ret = remap_area_pte(pmd, addr, next, phys_addr, prot); + if (ret) + return ret; + phys_addr += next - addr; + } while (pmd++, addr = next, addr != end); + return ret; } -static int -remap_area_pages(unsigned long start, unsigned long pfn, - unsigned long size, unsigned long flags) +static int remap_area_pages(unsigned long start, unsigned long pfn, + unsigned long size, unsigned long flags) { - unsigned long address = start; - unsigned long end = start + size; + unsigned long addr = start; + unsigned long next, end = start + size; unsigned long phys_addr = __pfn_to_phys(pfn); + pgprot_t prot = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | + L_PTE_DIRTY | L_PTE_WRITE | flags); + pgd_t *pgd; int err = 0; - pgd_t * dir; - phys_addr -= address; - dir = pgd_offset(&init_mm, address); - BUG_ON(address >= end); + BUG_ON(addr >= end); + pgd = pgd_offset_k(addr); do { - pmd_t *pmd = pmd_alloc(&init_mm, dir, address); - if (!pmd) { - err = -ENOMEM; - break; - } - if (remap_area_pmd(pmd, address, end - address, - phys_addr + address, flags)) { - err = -ENOMEM; + next = pgd_addr_end(addr, end); + err = remap_area_pmd(pgd, addr, next, phys_addr, prot); + if (err) break; - } - - address = (address + PGDIR_SIZE) & PGDIR_MASK; - dir++; - } while (address && (address < end)); + phys_addr += next - addr; + } while (pgd++, addr = next, addr != end); return err; } diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index b7f194af20b..f028aef9a86 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -294,12 +294,6 @@ static void __init build_mem_type_table(void) mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE; mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED; - /* - * User pages need to be mapped with the ASID - * (iow, non-global) - */ - user_pgprot |= L_PTE_ASID; - #ifdef CONFIG_SMP /* * Mark memory with the "shared" attribute for SMP systems @@ -408,7 +402,7 @@ alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pg } ptep = pte_offset_kernel(pmdp, virt); - set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot)); + set_pte_ext(ptep, pfn_pte(phys >> PAGE_SHIFT, prot), 0); } /* diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index 20c1b0df75f..50b9aed6000 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -57,7 +57,7 @@ pgd_t *get_pgd_slow(struct mm_struct *mm) init_pmd = pmd_offset(init_pgd, 0); init_pte = pte_offset_map_nested(init_pmd, 0); - set_pte(new_pte, *init_pte); + set_pte_ext(new_pte, *init_pte, 0); pte_unmap_nested(init_pte); pte_unmap(new_pte); } diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 289b8e6f504..700c04d6996 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -397,7 +397,7 @@ ENTRY(cpu_arm1020_switch_mm) * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm1020_set_pte) +ENTRY(cpu_arm1020_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -477,7 +477,7 @@ arm1020_processor_functions: .word cpu_arm1020_do_idle .word cpu_arm1020_dcache_clean_area .word cpu_arm1020_switch_mm - .word cpu_arm1020_set_pte + .word cpu_arm1020_set_pte_ext .size arm1020_processor_functions, . - arm1020_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index bed9db6ba58..1cc206ab5ea 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -381,7 +381,7 @@ ENTRY(cpu_arm1020e_switch_mm) * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm1020e_set_pte) +ENTRY(cpu_arm1020e_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -458,7 +458,7 @@ arm1020e_processor_functions: .word cpu_arm1020e_do_idle .word cpu_arm1020e_dcache_clean_area .word cpu_arm1020e_switch_mm - .word cpu_arm1020e_set_pte + .word cpu_arm1020e_set_pte_ext .size arm1020e_processor_functions, . - arm1020e_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index d2a7c1b9cab..aff0ea08e2f 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -358,12 +358,12 @@ ENTRY(cpu_arm1022_switch_mm) mov pc, lr /* - * cpu_arm1022_set_pte(ptep, pte) + * cpu_arm1022_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm1022_set_pte) +ENTRY(cpu_arm1022_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -441,7 +441,7 @@ arm1022_processor_functions: .word cpu_arm1022_do_idle .word cpu_arm1022_dcache_clean_area .word cpu_arm1022_switch_mm - .word cpu_arm1022_set_pte + .word cpu_arm1022_set_pte_ext .size arm1022_processor_functions, . - arm1022_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 3247ce5c017..65e43a10908 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -347,12 +347,12 @@ ENTRY(cpu_arm1026_switch_mm) mov pc, lr /* - * cpu_arm1026_set_pte(ptep, pte) + * cpu_arm1026_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm1026_set_pte) +ENTRY(cpu_arm1026_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -436,7 +436,7 @@ arm1026_processor_functions: .word cpu_arm1026_do_idle .word cpu_arm1026_dcache_clean_area .word cpu_arm1026_switch_mm - .word cpu_arm1026_set_pte + .word cpu_arm1026_set_pte_ext .size arm1026_processor_functions, . - arm1026_processor_functions .section .rodata diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index ce4f9eef763..123a7dc7a43 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -209,14 +209,14 @@ ENTRY(cpu_arm7_switch_mm) mov pc, lr /* - * Function: arm6_7_set_pte(pte_t *ptep, pte_t pte) + * Function: arm6_7_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext) * Params : r0 = Address to set * : r1 = value to set * Purpose : Set a PTE and flush it out of any WB cache */ .align 5 -ENTRY(cpu_arm6_set_pte) -ENTRY(cpu_arm7_set_pte) +ENTRY(cpu_arm6_set_pte_ext) +ENTRY(cpu_arm7_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -299,7 +299,7 @@ ENTRY(arm6_processor_functions) .word cpu_arm6_do_idle .word cpu_arm6_dcache_clean_area .word cpu_arm6_switch_mm - .word cpu_arm6_set_pte + .word cpu_arm6_set_pte_ext .size arm6_processor_functions, . - arm6_processor_functions /* @@ -315,7 +315,7 @@ ENTRY(arm7_processor_functions) .word cpu_arm7_do_idle .word cpu_arm7_dcache_clean_area .word cpu_arm7_switch_mm - .word cpu_arm7_set_pte + .word cpu_arm7_set_pte_ext .size arm7_processor_functions, . - arm7_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index c04c194da78..dc763be4336 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -88,13 +88,13 @@ ENTRY(cpu_arm720_switch_mm) mov pc, lr /* - * Function: arm720_set_pte(pte_t *ptep, pte_t pte) + * Function: arm720_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext) * Params : r0 = Address to set * : r1 = value to set * Purpose : Set a PTE and flush it out of any WB cache */ .align 5 -ENTRY(cpu_arm720_set_pte) +ENTRY(cpu_arm720_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -204,7 +204,7 @@ ENTRY(arm720_processor_functions) .word cpu_arm720_do_idle .word cpu_arm720_dcache_clean_area .word cpu_arm720_switch_mm - .word cpu_arm720_set_pte + .word cpu_arm720_set_pte_ext .size arm720_processor_functions, . - arm720_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 65cbb2851bf..75c945ed6c4 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -344,12 +344,12 @@ ENTRY(cpu_arm920_switch_mm) mov pc, lr /* - * cpu_arm920_set_pte(ptep, pte) + * cpu_arm920_set_pte(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm920_set_pte) +ENTRY(cpu_arm920_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -423,7 +423,7 @@ arm920_processor_functions: .word cpu_arm920_do_idle .word cpu_arm920_dcache_clean_area .word cpu_arm920_switch_mm - .word cpu_arm920_set_pte + .word cpu_arm920_set_pte_ext .size arm920_processor_functions, . - arm920_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 52761b70d73..ffb751b877f 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -348,12 +348,12 @@ ENTRY(cpu_arm922_switch_mm) mov pc, lr /* - * cpu_arm922_set_pte(ptep, pte) + * cpu_arm922_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm922_set_pte) +ENTRY(cpu_arm922_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -427,7 +427,7 @@ arm922_processor_functions: .word cpu_arm922_do_idle .word cpu_arm922_dcache_clean_area .word cpu_arm922_switch_mm - .word cpu_arm922_set_pte + .word cpu_arm922_set_pte_ext .size arm922_processor_functions, . - arm922_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 5b74339d158..44c2c997819 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -391,12 +391,12 @@ ENTRY(cpu_arm925_switch_mm) mov pc, lr /* - * cpu_arm925_set_pte(ptep, pte) + * cpu_arm925_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm925_set_pte) +ENTRY(cpu_arm925_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -490,7 +490,7 @@ arm925_processor_functions: .word cpu_arm925_do_idle .word cpu_arm925_dcache_clean_area .word cpu_arm925_switch_mm - .word cpu_arm925_set_pte + .word cpu_arm925_set_pte_ext .size arm925_processor_functions, . - arm925_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 8628ed29a95..5b80b6bdd0c 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -348,12 +348,12 @@ ENTRY(cpu_arm926_switch_mm) mov pc, lr /* - * cpu_arm926_set_pte(ptep, pte) + * cpu_arm926_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_arm926_set_pte) +ENTRY(cpu_arm926_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -439,7 +439,7 @@ arm926_processor_functions: .word cpu_arm926_do_idle .word cpu_arm926_dcache_clean_area .word cpu_arm926_switch_mm - .word cpu_arm926_set_pte + .word cpu_arm926_set_pte_ext .size arm926_processor_functions, . - arm926_processor_functions .section ".rodata" @@ -480,7 +480,7 @@ __arm926_proc_info: b __arm926_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_VFP|HWCAP_EDSP|HWCAP_JAVA + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA .long cpu_arm926_name .long arm926_processor_functions .long v4wbi_tlb_fns diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index cd7d865c9d1..6e226e12989 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -146,12 +146,12 @@ ENTRY(cpu_sa110_switch_mm) #endif /* - * cpu_sa110_set_pte(ptep, pte) + * cpu_sa110_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_sa110_set_pte) +ENTRY(cpu_sa110_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -222,7 +222,7 @@ ENTRY(sa110_processor_functions) .word cpu_sa110_do_idle .word cpu_sa110_dcache_clean_area .word cpu_sa110_switch_mm - .word cpu_sa110_set_pte + .word cpu_sa110_set_pte_ext .size sa110_processor_functions, . - sa110_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index b776653cc31..9afb11d089f 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -159,12 +159,12 @@ ENTRY(cpu_sa1100_switch_mm) #endif /* - * cpu_sa1100_set_pte(ptep, pte) + * cpu_sa1100_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out */ .align 5 -ENTRY(cpu_sa1100_set_pte) +ENTRY(cpu_sa1100_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version @@ -237,7 +237,7 @@ ENTRY(sa1100_processor_functions) .word cpu_sa1100_do_idle .word cpu_sa1100_dcache_clean_area .word cpu_sa1100_switch_mm - .word cpu_sa1100_set_pte + .word cpu_sa1100_set_pte_ext .size sa1100_processor_functions, . - sa1100_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index ab143557e68..9f396b4fa0b 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -17,7 +17,7 @@ #ifndef MULTI_CPU EXPORT_SYMBOL(cpu_dcache_clean_area); -EXPORT_SYMBOL(cpu_set_pte); +EXPORT_SYMBOL(cpu_set_pte_ext); #else EXPORT_SYMBOL(processor); #endif diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index b440c8a1d34..7b1843befb9 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -103,13 +103,14 @@ ENTRY(cpu_v6_switch_mm) mov pc, lr /* - * cpu_v6_set_pte(ptep, pte) + * cpu_v6_set_pte_ext(ptep, pte, ext) * * Set a level 2 translation table entry. * * - ptep - pointer to level 2 translation table entry * (hardware version is stored at -1024 bytes) * - pte - PTE value to store + * - ext - value for extended PTE bits * * Permissions: * YUWD APX AP1 AP0 SVC User @@ -121,33 +122,34 @@ ENTRY(cpu_v6_switch_mm) * 11x0 0 1 0 r/w r/o * 1111 0 1 1 r/w r/w */ -ENTRY(cpu_v6_set_pte) +ENTRY(cpu_v6_set_pte_ext) #ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version - bic r2, r1, #0x000003f0 - bic r2, r2, #0x00000003 - orr r2, r2, #PTE_EXT_AP0 | 2 + bic r3, r1, #0x000003f0 + bic r3, r3, #0x00000003 + orr r3, r3, r2 + orr r3, r3, #PTE_EXT_AP0 | 2 tst r1, #L_PTE_WRITE tstne r1, #L_PTE_DIRTY - orreq r2, r2, #PTE_EXT_APX + orreq r3, r3, #PTE_EXT_APX tst r1, #L_PTE_USER - orrne r2, r2, #PTE_EXT_AP1 - tstne r2, #PTE_EXT_APX - bicne r2, r2, #PTE_EXT_APX | PTE_EXT_AP0 + orrne r3, r3, #PTE_EXT_AP1 + tstne r3, #PTE_EXT_APX + bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0 tst r1, #L_PTE_YOUNG - biceq r2, r2, #PTE_EXT_APX | PTE_EXT_AP_MASK + biceq r3, r3, #PTE_EXT_APX | PTE_EXT_AP_MASK tst r1, #L_PTE_EXEC - orreq r2, r2, #PTE_EXT_XN + orreq r3, r3, #PTE_EXT_XN tst r1, #L_PTE_PRESENT - moveq r2, #0 + moveq r3, #0 - str r2, [r0] + str r3, [r0] mcr p15, 0, r0, c7, c10, 1 @ flush_pte #endif mov pc, lr @@ -156,7 +158,7 @@ ENTRY(cpu_v6_set_pte) cpu_v6_name: - .asciz "Some Random V6 Processor" + .asciz "ARMv6-compatible processor" .align .section ".text.init", #alloc, #execinstr @@ -207,11 +209,6 @@ __v6_setup: #endif mcr p15, 0, r4, c2, c0, 1 @ load TTB1 #endif /* CONFIG_MMU */ -#ifdef CONFIG_VFP - mrc p15, 0, r0, c1, c0, 2 - orr r0, r0, #(0xf << 20) - mcr p15, 0, r0, c1, c0, 2 @ Enable full access to VFP -#endif adr r5, v6_crval ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0, 0 @ read control register @@ -238,7 +235,7 @@ ENTRY(v6_processor_functions) .word cpu_v6_do_idle .word cpu_v6_dcache_clean_area .word cpu_v6_switch_mm - .word cpu_v6_set_pte + .word cpu_v6_set_pte_ext .size v6_processor_functions, . - v6_processor_functions .type cpu_arch_name, #object @@ -273,7 +270,7 @@ __v6_proc_info: b __v6_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_VFP|HWCAP_EDSP|HWCAP_JAVA + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA .long cpu_v6_name .long v6_processor_functions .long v6wbi_tlb_fns diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 1ef564d0957..43494ae8f01 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -357,13 +357,13 @@ ENTRY(cpu_xsc3_switch_mm) cpwait_ret lr, ip /* - * cpu_xsc3_set_pte(ptep, pte) + * cpu_xsc3_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out * */ .align 5 -ENTRY(cpu_xsc3_set_pte) +ENTRY(cpu_xsc3_set_pte_ext) str r1, [r0], #-2048 @ linux version bic r2, r1, #0xff0 @ Keep C, B bits @@ -457,7 +457,7 @@ ENTRY(xsc3_processor_functions) .word cpu_xsc3_do_idle .word cpu_xsc3_dcache_clean_area .word cpu_xsc3_switch_mm - .word cpu_xsc3_set_pte + .word cpu_xsc3_set_pte_ext .size xsc3_processor_functions, . - xsc3_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index cc1004b3e51..490e11b3423 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -421,14 +421,14 @@ ENTRY(cpu_xscale_switch_mm) cpwait_ret lr, ip /* - * cpu_xscale_set_pte(ptep, pte) + * cpu_xscale_set_pte_ext(ptep, pte, ext) * * Set a PTE and flush it out * * Errata 40: must set memory to write-through for user read-only pages. */ .align 5 -ENTRY(cpu_xscale_set_pte) +ENTRY(cpu_xscale_set_pte_ext) str r1, [r0], #-2048 @ linux version bic r2, r1, #0xff0 @@ -529,7 +529,7 @@ ENTRY(xscale_processor_functions) .word cpu_xscale_do_idle .word cpu_xscale_dcache_clean_area .word cpu_xscale_switch_mm - .word cpu_xscale_set_pte + .word cpu_xscale_set_pte_ext .size xscale_processor_functions, . - xscale_processor_functions .section ".rodata" diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index f08eafbddcc..e26cc1f5994 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -263,13 +263,24 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) if (exceptions) vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs); } - + /* * VFP support code initialisation. */ static int __init vfp_init(void) { unsigned int vfpsid; + unsigned int cpu_arch = cpu_architecture(); + u32 access = 0; + + if (cpu_arch >= CPU_ARCH_ARMv6) { + access = get_copro_access(); + + /* + * Enable full access to VFP (cp10 and cp11) + */ + set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11)); + } /* * First check that there is a VFP that we can use. @@ -281,6 +292,12 @@ static int __init vfp_init(void) printk(KERN_INFO "VFP support v0.3: "); if (VFP_arch) { printk("not present\n"); + + /* + * Restore the copro access register. + */ + if (cpu_arch >= CPU_ARCH_ARMv6) + set_copro_access(access); } else if (vfpsid & FPSID_NODOUBLE) { printk("no double precision support\n"); } else { @@ -291,9 +308,16 @@ static int __init vfp_init(void) (vfpsid & FPSID_PART_MASK) >> FPSID_PART_BIT, (vfpsid & FPSID_VARIANT_MASK) >> FPSID_VARIANT_BIT, (vfpsid & FPSID_REV_MASK) >> FPSID_REV_BIT); + vfp_vector = vfp_support_entry; thread_register_notifier(&vfp_notifier_block); + + /* + * We detected VFP, and the support code is + * in place; report VFP support to userspace. + */ + elf_hwcap |= HWCAP_VFP; } return 0; } diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h index a6912b3d867..e56a4e247d6 100644 --- a/include/asm-arm/arch-imx/imx-regs.h +++ b/include/asm-arm/arch-imx/imx-regs.h @@ -41,7 +41,13 @@ /* PLL registers */ #define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */ -#define CSCR_SYSTEM_SEL (1<<16) +#define CSCR_SPLL_RESTART (1<<22) +#define CSCR_MPLL_RESTART (1<<21) +#define CSCR_SYSTEM_SEL (1<<16) +#define CSCR_BCLK_DIV (0xf<<10) +#define CSCR_MPU_PRESC (1<<15) +#define CSCR_SPEN (1<<1) +#define CSCR_MPEN (1<<0) #define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */ #define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */ @@ -49,8 +55,6 @@ #define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */ #define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */ -#define CSCR_MPLL_RESTART (1<<21) - /* * GPIO Module and I/O Multiplexer * x = 0..3 for reg_A, reg_B, reg_C, reg_D diff --git a/include/asm-arm/arch-s3c2410/regs-udc.h b/include/asm-arm/arch-s3c2410/regs-udc.h index 487861d5b49..3c8354619b6 100644 --- a/include/asm-arm/arch-s3c2410/regs-udc.h +++ b/include/asm-arm/arch-s3c2410/regs-udc.h @@ -11,8 +11,7 @@ #ifndef __ASM_ARCH_REGS_UDC_H #define __ASM_ARCH_REGS_UDC_H - -#define S3C2410_USBDREG(x) ((x) + S3C24XX_VA_USBDEV) +#define S3C2410_USBDREG(x) (x) #define S3C2410_UDC_FUNC_ADDR_REG S3C2410_USBDREG(0x0140) #define S3C2410_UDC_PWR_REG S3C2410_USBDREG(0x0144) @@ -136,8 +135,8 @@ #define S3C2410_UDC_OCSR2_ISO (1<<6) // R/W #define S3C2410_UDC_OCSR2_DMAIEN (1<<5) // R/W -#define S3C2410_UDC_SETIX(x) \ - __raw_writel(S3C2410_UDC_INDEX_ ## x, S3C2410_UDC_INDEX_REG); +#define S3C2410_UDC_SETIX(base,x) \ + writel(S3C2410_UDC_INDEX_ ## x, base+S3C2410_UDC_INDEX_REG); #define S3C2410_UDC_EP0_CSR_OPKRDY (1<<0) diff --git a/include/asm-arm/cpu-multi32.h b/include/asm-arm/cpu-multi32.h index 4679f63688e..715e18a4add 100644 --- a/include/asm-arm/cpu-multi32.h +++ b/include/asm-arm/cpu-multi32.h @@ -50,9 +50,10 @@ extern struct processor { */ void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm); /* - * Set a PTE + * Set a possibly extended PTE. Non-extended PTEs should + * ignore 'ext'. */ - void (*set_pte)(pte_t *ptep, pte_t pte); + void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext); } processor; #define cpu_proc_init() processor._proc_init() @@ -60,5 +61,5 @@ extern struct processor { #define cpu_reset(addr) processor.reset(addr) #define cpu_do_idle() processor._do_idle() #define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz) -#define cpu_set_pte(ptep, pte) processor.set_pte(ptep, pte) +#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext) #define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm) diff --git a/include/asm-arm/cpu-single.h b/include/asm-arm/cpu-single.h index 6723e67244f..0b120ee3609 100644 --- a/include/asm-arm/cpu-single.h +++ b/include/asm-arm/cpu-single.h @@ -28,7 +28,7 @@ #define cpu_do_idle __cpu_fn(CPU_NAME,_do_idle) #define cpu_dcache_clean_area __cpu_fn(CPU_NAME,_dcache_clean_area) #define cpu_do_switch_mm __cpu_fn(CPU_NAME,_switch_mm) -#define cpu_set_pte __cpu_fn(CPU_NAME,_set_pte) +#define cpu_set_pte_ext __cpu_fn(CPU_NAME,_set_pte_ext) #include <asm/page.h> @@ -40,5 +40,5 @@ extern void cpu_proc_fin(void); extern int cpu_do_idle(void); extern void cpu_dcache_clean_area(void *, int); extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm); -extern void cpu_set_pte(pte_t *ptep, pte_t pte); +extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h index 88cd5c784ef..b8cf2d5ec30 100644 --- a/include/asm-arm/pgtable.h +++ b/include/asm-arm/pgtable.h @@ -21,6 +21,7 @@ #include <asm/memory.h> #include <asm/arch/vmalloc.h> +#include <asm/pgtable-hwdef.h> /* * Just any arbitrary offset to the start of the vmalloc VM area: the @@ -170,7 +171,6 @@ extern void __pgd_error(const char *file, int line, unsigned long val); #define L_PTE_EXEC (1 << 6) #define L_PTE_DIRTY (1 << 7) #define L_PTE_SHARED (1 << 10) /* shared(v6), coherent(xsc3) */ -#define L_PTE_ASID (1 << 11) /* non-global (use ASID, v6) */ #ifndef __ASSEMBLY__ @@ -228,7 +228,7 @@ extern struct page *empty_zero_page; #define pfn_pte(pfn,prot) (__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))) #define pte_none(pte) (!pte_val(pte)) -#define pte_clear(mm,addr,ptep) set_pte_at((mm),(addr),(ptep), __pte(0)) +#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) #define pte_page(pte) (pfn_to_page(pte_pfn(pte))) #define pte_offset_kernel(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) #define pte_offset_map(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) @@ -236,8 +236,11 @@ extern struct page *empty_zero_page; #define pte_unmap(pte) do { } while (0) #define pte_unmap_nested(pte) do { } while (0) -#define set_pte(ptep, pte) cpu_set_pte(ptep,pte) -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) +#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext) + +#define set_pte_at(mm,addr,ptep,pteval) do { \ + set_pte_ext(ptep, pteval, (addr) >= PAGE_OFFSET ? 0 : PTE_EXT_NG); \ + } while (0) /* * The following only work if pte_present() is true. diff --git a/include/asm-arm/processor.h b/include/asm-arm/processor.h index b442e8e2a80..1bbf16182d6 100644 --- a/include/asm-arm/processor.h +++ b/include/asm-arm/processor.h @@ -103,14 +103,14 @@ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); #if __LINUX_ARM_ARCH__ >= 5 #define ARCH_HAS_PREFETCH -#define prefetch(ptr) \ - ({ \ - __asm__ __volatile__( \ - "pld\t%0" \ - : \ - : "o" (*(char *)(ptr)) \ - : "cc"); \ - }) +static inline void prefetch(const void *ptr) +{ + __asm__ __volatile__( + "pld\t%0" + : + : "o" (*(char *)ptr) + : "cc"); +} #define ARCH_HAS_PREFETCHW #define prefetchw(ptr) prefetch(ptr) diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index f05fbe31576..e160aeb0138 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -139,23 +139,60 @@ static inline int cpu_is_xsc3(void) #define cpu_is_xscale() 1 #endif -#define set_cr(x) \ - __asm__ __volatile__( \ - "mcr p15, 0, %0, c1, c0, 0 @ set CR" \ - : : "r" (x) : "cc") - -#define get_cr() \ - ({ \ - unsigned int __val; \ - __asm__ __volatile__( \ - "mrc p15, 0, %0, c1, c0, 0 @ get CR" \ - : "=r" (__val) : : "cc"); \ - __val; \ - }) +static inline unsigned int get_cr(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc"); + return val; +} + +static inline void set_cr(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR" + : : "r" (val) : "cc"); +} + +#define CPACC_FULL(n) (3 << (n * 2)) +#define CPACC_SVC(n) (1 << (n * 2)) +#define CPACC_DISABLE(n) (0 << (n * 2)) + +static inline unsigned int get_copro_access(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access" + : "=r" (val) : : "cc"); + return val; +} + +static inline void set_copro_access(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access" + : : "r" (val) : "cc"); +} extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ extern unsigned long cr_alignment; /* defined in entry-armv.S */ +#ifndef CONFIG_SMP +static inline void adjust_cr(unsigned long mask, unsigned long set) +{ + unsigned long flags, cr; + + mask &= ~CR_A; + + set &= mask; + + local_irq_save(flags); + + cr_no_alignment = (cr_no_alignment & ~mask) | set; + cr_alignment = (cr_alignment & ~mask) | set; + + set_cr((get_cr() & ~mask) | set); + + local_irq_restore(flags); +} +#endif + #define UDBG_UNDEFINED (1 << 0) #define UDBG_SYSCALL (1 << 1) #define UDBG_BADABORT (1 << 2) diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h index d44c629d842..32b06eb5281 100644 --- a/include/asm-arm/unistd.h +++ b/include/asm-arm/unistd.h @@ -347,6 +347,19 @@ #define __NR_mbind (__NR_SYSCALL_BASE+319) #define __NR_get_mempolicy (__NR_SYSCALL_BASE+320) #define __NR_set_mempolicy (__NR_SYSCALL_BASE+321) +#define __NR_openat (__NR_SYSCALL_BASE+322) +#define __NR_mkdirat (__NR_SYSCALL_BASE+323) +#define __NR_mknodat (__NR_SYSCALL_BASE+324) +#define __NR_fchownat (__NR_SYSCALL_BASE+325) +#define __NR_futimesat (__NR_SYSCALL_BASE+326) +#define __NR_fstatat64 (__NR_SYSCALL_BASE+327) +#define __NR_unlinkat (__NR_SYSCALL_BASE+328) +#define __NR_renameat (__NR_SYSCALL_BASE+329) +#define __NR_linkat (__NR_SYSCALL_BASE+330) +#define __NR_symlinkat (__NR_SYSCALL_BASE+331) +#define __NR_readlinkat (__NR_SYSCALL_BASE+332) +#define __NR_fchmodat (__NR_SYSCALL_BASE+333) +#define __NR_faccessat (__NR_SYSCALL_BASE+334) /* * The following SWIs are ARM private. |