diff options
| -rw-r--r-- | drivers/pcmcia/at91_cf.c | 34 |
1 files changed, 20 insertions, 14 deletions
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c index 3bcb7dc3299..a8fa6c17fcf 100644 --- a/drivers/pcmcia/at91_cf.c +++ b/drivers/pcmcia/at91_cf.c @@ -32,10 +32,11 @@ * A0..A10 work in each range; A23 indicates I/O space; A25 is CFRNW; * some other bit in {A24,A22..A11} is nREG to flag memory access * (vs attributes). So more than 2KB/region would just be waste. + * Note: These are offsets from the physical base address. */ -#define CF_ATTR_PHYS (AT91_CF_BASE) -#define CF_IO_PHYS (AT91_CF_BASE + (1 << 23)) -#define CF_MEM_PHYS (AT91_CF_BASE + 0x017ff800) +#define CF_ATTR_PHYS (0) +#define CF_IO_PHYS (1 << 23) +#define CF_MEM_PHYS (0x017ff800) /*--------------------------------------------------------------------------*/ @@ -48,6 +49,8 @@ struct at91_cf_socket { struct platform_device *pdev; struct at91_cf_data *board; + + unsigned long phys_baseaddr; }; #define SZ_2K (2 * SZ_1K) @@ -168,7 +171,7 @@ static int at91_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io) * some cards only like that way to get at the odd byte, despite * CF 3.0 spec table 35 also giving the D8-D15 option. */ - if (!(io->flags & (MAP_16BIT|MAP_AUTOSZ))) { + if (!(io->flags & (MAP_16BIT | MAP_AUTOSZ))) { csr |= AT91_SMC_DBW_8; pr_debug("%s: 8bit i/o bus\n", driver_name); } else { @@ -194,11 +197,11 @@ at91_cf_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *map) cf = container_of(s, struct at91_cf_socket, socket); - map->flags &= MAP_ACTIVE|MAP_ATTRIB|MAP_16BIT; + map->flags &= (MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT); if (map->flags & MAP_ATTRIB) - map->static_start = CF_ATTR_PHYS; + map->static_start = cf->phys_baseaddr + CF_ATTR_PHYS; else - map->static_start = CF_MEM_PHYS; + map->static_start = cf->phys_baseaddr + CF_MEM_PHYS; return 0; } @@ -235,6 +238,7 @@ static int __init at91_cf_probe(struct platform_device *pdev) cf->board = board; cf->pdev = pdev; + cf->phys_baseaddr = io->start; platform_set_drvdata(pdev, cf); /* CF takes over CS4, CS5, CS6 */ @@ -260,8 +264,7 @@ static int __init at91_cf_probe(struct platform_device *pdev) ); /* must be a GPIO; ergo must trigger on both edges */ - status = request_irq(board->det_pin, at91_cf_irq, - IRQF_SAMPLE_RANDOM, driver_name, cf); + status = request_irq(board->det_pin, at91_cf_irq, 0, driver_name, cf); if (status < 0) goto fail0; device_init_wakeup(&pdev->dev, 1); @@ -282,14 +285,18 @@ static int __init at91_cf_probe(struct platform_device *pdev) cf->socket.pci_irq = NR_IRQS + 1; /* pcmcia layer only remaps "real" memory not iospace */ - cf->socket.io_offset = (unsigned long) ioremap(CF_IO_PHYS, SZ_2K); - if (!cf->socket.io_offset) + cf->socket.io_offset = (unsigned long) ioremap(cf->phys_baseaddr + CF_IO_PHYS, SZ_2K); + if (!cf->socket.io_offset) { + status = -ENXIO; goto fail1; + } /* reserve CS4, CS5, and CS6 regions; but use just CS4 */ if (!request_mem_region(io->start, io->end + 1 - io->start, - driver_name)) + driver_name)) { + status = -ENXIO; goto fail1; + } pr_info("%s: irqs det #%d, io #%d\n", driver_name, board->det_pin, board->irq_pin); @@ -319,7 +326,6 @@ fail1: fail0a: device_init_wakeup(&pdev->dev, 0); free_irq(board->det_pin, cf); - device_init_wakeup(&pdev->dev, 0); fail0: at91_sys_write(AT91_EBI_CSA, csa); kfree(cf); @@ -336,8 +342,8 @@ static int __exit at91_cf_remove(struct platform_device *pdev) pcmcia_unregister_socket(&cf->socket); if (board->irq_pin) free_irq(board->irq_pin, cf); - free_irq(board->det_pin, cf); device_init_wakeup(&pdev->dev, 0); + free_irq(board->det_pin, cf); iounmap((void __iomem *) cf->socket.io_offset); release_mem_region(io->start, io->end + 1 - io->start); |