diff options
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800lib.c | 832 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800lib.h | 25 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800pci.c | 854 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800usb.c | 856 |
4 files changed, 887 insertions, 1680 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 3cbe85434ce..ba88d643edd 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -242,3 +242,835 @@ void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev, mutex_unlock(&rt2x00dev->csr_mutex); } EXPORT_SYMBOL_GPL(rt2800_mcu_request); + +#ifdef CONFIG_RT2X00_LIB_DEBUGFS +const struct rt2x00debug rt2800_rt2x00debug = { + .owner = THIS_MODULE, + .csr = { + .read = rt2800_register_read, + .write = rt2800_register_write, + .flags = RT2X00DEBUGFS_OFFSET, + .word_base = CSR_REG_BASE, + .word_size = sizeof(u32), + .word_count = CSR_REG_SIZE / sizeof(u32), + }, + .eeprom = { + .read = rt2x00_eeprom_read, + .write = rt2x00_eeprom_write, + .word_base = EEPROM_BASE, + .word_size = sizeof(u16), + .word_count = EEPROM_SIZE / sizeof(u16), + }, + .bbp = { + .read = rt2800_bbp_read, + .write = rt2800_bbp_write, + .word_base = BBP_BASE, + .word_size = sizeof(u8), + .word_count = BBP_SIZE / sizeof(u8), + }, + .rf = { + .read = rt2x00_rf_read, + .write = rt2800_rf_write, + .word_base = RF_BASE, + .word_size = sizeof(u32), + .word_count = RF_SIZE / sizeof(u32), + }, +}; +EXPORT_SYMBOL_GPL(rt2800_rt2x00debug); +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ + +int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); + return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2); +} +EXPORT_SYMBOL_GPL(rt2800_rfkill_poll); + +#ifdef CONFIG_RT2X00_LIB_LEDS +static void rt2800_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + unsigned int enabled = brightness != LED_OFF; + unsigned int bg_mode = + (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); + unsigned int polarity = + rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, + EEPROM_FREQ_LED_POLARITY); + unsigned int ledmode = + rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, + EEPROM_FREQ_LED_MODE); + + if (led->type == LED_TYPE_RADIO) { + rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, + enabled ? 0x20 : 0); + } else if (led->type == LED_TYPE_ASSOC) { + rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, + enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20); + } else if (led->type == LED_TYPE_QUALITY) { + /* + * The brightness is divided into 6 levels (0 - 5), + * The specs tell us the following levels: + * 0, 1 ,3, 7, 15, 31 + * to determine the level in a simple way we can simply + * work with bitshifting: + * (1 << level) - 1 + */ + rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, + (1 << brightness / (LED_FULL / 6)) - 1, + polarity); + } +} + +static int rt2800_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, unsigned long *delay_off) +{ + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + u32 reg; + + rt2800_register_read(led->rt2x00dev, LED_CFG, ®); + rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on); + rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off); + rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3); + rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3); + rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12); + rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3); + rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1); + rt2800_register_write(led->rt2x00dev, LED_CFG, reg); + + return 0; +} + +void rt2800_init_led(struct rt2x00_dev *rt2x00dev, + struct rt2x00_led *led, enum led_type type) +{ + led->rt2x00dev = rt2x00dev; + led->type = type; + led->led_dev.brightness_set = rt2800_brightness_set; + led->led_dev.blink_set = rt2800_blink_set; + led->flags = LED_INITIALIZED; +} +EXPORT_SYMBOL_GPL(rt2800_init_led); +#endif /* CONFIG_RT2X00_LIB_LEDS */ + +/* + * Configuration handlers. + */ +static void rt2800_config_wcid_attr(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct mac_wcid_entry wcid_entry; + struct mac_iveiv_entry iveiv_entry; + u32 offset; + u32 reg; + + offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx); + + rt2800_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, + !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, + (crypto->cmd == SET_KEY) * crypto->cipher); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, + (crypto->cmd == SET_KEY) * crypto->bssidx); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); + rt2800_register_write(rt2x00dev, offset, reg); + + offset = MAC_IVEIV_ENTRY(key->hw_key_idx); + + memset(&iveiv_entry, 0, sizeof(iveiv_entry)); + if ((crypto->cipher == CIPHER_TKIP) || + (crypto->cipher == CIPHER_TKIP_NO_MIC) || + (crypto->cipher == CIPHER_AES)) + iveiv_entry.iv[3] |= 0x20; + iveiv_entry.iv[3] |= key->keyidx << 6; + rt2800_register_multiwrite(rt2x00dev, offset, + &iveiv_entry, sizeof(iveiv_entry)); + + offset = MAC_WCID_ENTRY(key->hw_key_idx); + + memset(&wcid_entry, 0, sizeof(wcid_entry)); + if (crypto->cmd == SET_KEY) + memcpy(&wcid_entry, crypto->address, ETH_ALEN); + rt2800_register_multiwrite(rt2x00dev, offset, + &wcid_entry, sizeof(wcid_entry)); +} + +int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_key_entry key_entry; + struct rt2x00_field32 field; + u32 offset; + u32 reg; + + if (crypto->cmd == SET_KEY) { + key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx; + + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + offset = SHARED_KEY_ENTRY(key->hw_key_idx); + rt2800_register_multiwrite(rt2x00dev, offset, + &key_entry, sizeof(key_entry)); + } + + /* + * The cipher types are stored over multiple registers + * starting with SHARED_KEY_MODE_BASE each word will have + * 32 bits and contains the cipher types for 2 bssidx each. + * Using the correct defines correctly will cause overhead, + * so just calculate the correct offset. + */ + field.bit_offset = 4 * (key->hw_key_idx % 8); + field.bit_mask = 0x7 << field.bit_offset; + + offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); + + rt2800_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, field, + (crypto->cmd == SET_KEY) * crypto->cipher); + rt2800_register_write(rt2x00dev, offset, reg); + + /* + * Update WCID information + */ + rt2800_config_wcid_attr(rt2x00dev, crypto, key); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_config_shared_key); + +int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_key_entry key_entry; + u32 offset; + + if (crypto->cmd == SET_KEY) { + /* + * 1 pairwise key is possible per AID, this means that the AID + * equals our hw_key_idx. Make sure the WCID starts _after_ the + * last possible shared key entry. + */ + if (crypto->aid > (256 - 32)) + return -ENOSPC; + + key->hw_key_idx = 32 + crypto->aid; + + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx); + rt2800_register_multiwrite(rt2x00dev, offset, + &key_entry, sizeof(key_entry)); + } + + /* + * Update WCID information + */ + rt2800_config_wcid_attr(rt2x00dev, crypto, key); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_config_pairwise_key); + +void rt2800_config_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter_flags) +{ + u32 reg; + + /* + * Start configuration steps. + * Note that the version error will always be dropped + * and broadcast frames will always be accepted since + * there is no filter for it at this time. + */ + rt2800_register_read(rt2x00dev, RX_FILTER_CFG, ®); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR, + !(filter_flags & FIF_FCSFAIL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, + !(filter_flags & FIF_PROMISC_IN_BSS)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, + !(filter_flags & FIF_ALLMULTI)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, + !(filter_flags & FIF_PSPOLL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, + !(filter_flags & FIF_CONTROL)); + rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg); +} +EXPORT_SYMBOL_GPL(rt2800_config_filter); + +void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, const unsigned int flags) +{ + unsigned int beacon_base; + u32 reg; + + if (flags & CONFIG_UPDATE_TYPE) { + /* + * Clear current synchronisation setup. + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); + rt2800_register_write(rt2x00dev, beacon_base, 0); + + /* + * Enable synchronisation. + */ + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync); + rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + } + + if (flags & CONFIG_UPDATE_MAC) { + reg = le32_to_cpu(conf->mac[1]); + rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); + conf->mac[1] = cpu_to_le32(reg); + + rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0, + conf->mac, sizeof(conf->mac)); + } + + if (flags & CONFIG_UPDATE_BSSID) { + reg = le32_to_cpu(conf->bssid[1]); + rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0); + rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0); + conf->bssid[1] = cpu_to_le32(reg); + + rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0, + conf->bssid, sizeof(conf->bssid)); + } +} +EXPORT_SYMBOL_GPL(rt2800_config_intf); + +void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); + rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20); + rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); + + rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, ®); + rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, + !!erp->short_preamble); + rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, + !!erp->short_preamble); + rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg); + + rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, + erp->cts_protection ? 2 : 0); + rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); + + rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, + erp->basic_rates); + rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); + + rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); + rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time); + rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2); + rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); + + rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, ®); + rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs); + rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs); + rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4); + rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs); + rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1); + rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg); + + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, + erp->beacon_int * 16); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); +} +EXPORT_SYMBOL_GPL(rt2800_config_erp); + +void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant) +{ + u8 r1; + u8 r3; + + rt2800_bbp_read(rt2x00dev, 1, &r1); + rt2800_bbp_read(rt2x00dev, 3, &r3); + + /* + * Configure the TX antenna. + */ + switch ((int)ant->tx) { + case 1: + rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); + if (rt2x00_intf_is_pci(rt2x00dev)) + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); + break; + case 2: + rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); + break; + case 3: + /* Do nothing */ + break; + } + + /* + * Configure the RX antenna. + */ + switch ((int)ant->rx) { + case 1: + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); + break; + case 2: + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1); + break; + case 3: + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2); + break; + } + + rt2800_bbp_write(rt2x00dev, 3, r3); + rt2800_bbp_write(rt2x00dev, 1, r1); +} +EXPORT_SYMBOL_GPL(rt2800_config_ant); + +static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u16 eeprom; + short lna_gain; + + if (libconf->rf.channel <= 14) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG); + } else if (libconf->rf.channel <= 64) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); + } else if (libconf->rf.channel <= 128) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1); + } else { + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2); + } + + rt2x00dev->lna_gain = lna_gain; +} + +static void rt2800_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); + + if (rt2x00dev->default_ant.tx == 1) + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); + + if (rt2x00dev->default_ant.rx == 1) { + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); + } else if (rt2x00dev->default_ant.rx == 2) + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); + + if (rf->channel > 14) { + /* + * When TX power is below 0, we should increase it by 7 to + * make it a positive value (Minumum value is -7). + * However this means that values between 0 and 7 have + * double meaning, and we should set a 7DBm boost flag. + */ + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST, + (info->tx_power1 >= 0)); + + if (info->tx_power1 < 0) + info->tx_power1 += 7; + + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, + TXPOWER_A_TO_DEV(info->tx_power1)); + + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST, + (info->tx_power2 >= 0)); + + if (info->tx_power2 < 0) + info->tx_power2 += 7; + + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, + TXPOWER_A_TO_DEV(info->tx_power2)); + } else { + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, + TXPOWER_G_TO_DEV(info->tx_power1)); + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, + TXPOWER_G_TO_DEV(info->tx_power2)); + } + + rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf)); + + rt2800_rf_write(rt2x00dev, 1, rf->rf1); + rt2800_rf_write(rt2x00dev, 2, rf->rf2); + rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt2800_rf_write(rt2x00dev, 4, rf->rf4); + + udelay(200); + + rt2800_rf_write(rt2x00dev, 1, rf->rf1); + rt2800_rf_write(rt2x00dev, 2, rf->rf2); + rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); + rt2800_rf_write(rt2x00dev, 4, rf->rf4); + + udelay(200); + + rt2800_rf_write(rt2x00dev, 1, rf->rf1); + rt2800_rf_write(rt2x00dev, 2, rf->rf2); + rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt2800_rf_write(rt2x00dev, 4, rf->rf4); +} + +static void rt2800_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + u8 rfcsr; + + rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1); + rt2800_rfcsr_write(rt2x00dev, 2, rf->rf3); + + rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); + rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); + + rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, + TXPOWER_G_TO_DEV(info->tx_power1)); + rt2800_rfcsr_write(rt2x00dev, 12, rfcsr); + + rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); + rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); + + rt2800_rfcsr_write(rt2x00dev, 24, + rt2x00dev->calibration[conf_is_ht40(conf)]); + + rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); + rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); +} + +static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + u32 reg; + unsigned int tx_pin; + u8 bbp; + + if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) + rt2800_config_channel_rt2x(rt2x00dev, conf, rf, info); + else + rt2800_config_channel_rt3x(rt2x00dev, conf, rf, info); + + /* + * Change BBP settings + */ + rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 86, 0); + + if (rf->channel <= 14) { + if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { + rt2800_bbp_write(rt2x00dev, 82, 0x62); + rt2800_bbp_write(rt2x00dev, 75, 0x46); + } else { + rt2800_bbp_write(rt2x00dev, 82, 0x84); + rt2800_bbp_write(rt2x00dev, 75, 0x50); + } + } else { + rt2800_bbp_write(rt2x00dev, 82, 0xf2); + + if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) + rt2800_bbp_write(rt2x00dev, 75, 0x46); + else + rt2800_bbp_write(rt2x00dev, 75, 0x50); + } + + rt2800_register_read(rt2x00dev, TX_BAND_CFG, ®); + rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf)); + rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14); + rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14); + rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg); + + tx_pin = 0; + + /* Turn on unused PA or LNA when not using 1T or 1R */ + if (rt2x00dev->default_ant.tx != 1) { + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); + } + + /* Turn on unused PA or LNA when not using 1T or 1R */ + if (rt2x00dev->default_ant.rx != 1) { + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); + } + + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14); + + rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); + + rt2800_bbp_read(rt2x00dev, 4, &bbp); + rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); + rt2800_bbp_write(rt2x00dev, 4, bbp); + + rt2800_bbp_read(rt2x00dev, 3, &bbp); + rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf)); + rt2800_bbp_write(rt2x00dev, 3, bbp); + + if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { + if (conf_is_ht40(conf)) { + rt2800_bbp_write(rt2x00dev, 69, 0x1a); + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + rt2800_bbp_write(rt2x00dev, 73, 0x16); + } else { + rt2800_bbp_write(rt2x00dev, 69, 0x16); + rt2800_bbp_write(rt2x00dev, 70, 0x08); + rt2800_bbp_write(rt2x00dev, 73, 0x11); + } + } + + msleep(1); +} + +static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, + const int txpower) +{ + u32 reg; + u32 value = TXPOWER_G_TO_DEV(txpower); + u8 r1; + + rt2800_bbp_read(rt2x00dev, 1, &r1); + rt2x00_set_field8(®, BBP1_TX_POWER, 0); + rt2800_bbp_write(rt2x00dev, 1, r1); + + rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, ®); + rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, reg); + + rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, ®); + rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, reg); + + rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, ®); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, reg); + + rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, ®); + rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, reg); + + rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, ®); + rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value); + rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value); + rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value); + rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, reg); +} + +static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, TX_RTY_CFG, ®); + rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, + libconf->conf->short_frame_max_tx_count); + rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, + libconf->conf->long_frame_max_tx_count); + rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000); + rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0); + rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0); + rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1); + rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg); +} + +static void rt2800_config_ps(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + enum dev_state state = + (libconf->conf->flags & IEEE80211_CONF_PS) ? + STATE_SLEEP : STATE_AWAKE; + u32 reg; + + if (state == STATE_SLEEP) { + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); + + rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, + libconf->conf->listen_interval - 1); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); + + rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); + } else { + rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); + + rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); + } +} + +void rt2800_config(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf, + const unsigned int flags) +{ + /* Always recalculate LNA gain before changing configuration */ + rt2800_config_lna_gain(rt2x00dev, libconf); + + if (flags & IEEE80211_CONF_CHANGE_CHANNEL) + rt2800_config_channel(rt2x00dev, libconf->conf, + &libconf->rf, &libconf->channel); + if (flags & IEEE80211_CONF_CHANGE_POWER) + rt2800_config_txpower(rt2x00dev, libconf->conf->power_level); + if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) + rt2800_config_retry_limit(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_PS) + rt2800_config_ps(rt2x00dev, libconf); +} +EXPORT_SYMBOL_GPL(rt2800_config); + +/* + * Link tuning + */ +void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual) +{ + u32 reg; + + /* + * Update FCS error count from register. + */ + rt2800_register_read(rt2x00dev, RX_STA_CNT0, ®); + qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR); +} +EXPORT_SYMBOL_GPL(rt2800_link_stats); + +static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev) +{ + if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { + if (rt2x00_intf_is_usb(rt2x00dev) && + rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) + return 0x1c + (2 * rt2x00dev->lna_gain); + else + return 0x2e + rt2x00dev->lna_gain; + } + + if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) + return 0x32 + (rt2x00dev->lna_gain * 5) / 3; + else + return 0x3a + (rt2x00dev->lna_gain * 5) / 3; +} + +static inline void rt2800_set_vgc(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, u8 vgc_level) +{ + if (qual->vgc_level != vgc_level) { + rt2800_bbp_write(rt2x00dev, 66, vgc_level); + qual->vgc_level = vgc_level; + qual->vgc_level_reg = vgc_level; + } +} + +void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual) +{ + rt2800_set_vgc(rt2x00dev, qual, rt2800_get_default_vgc(rt2x00dev)); +} +EXPORT_SYMBOL_GPL(rt2800_reset_tuner); + +void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, + const u32 count) +{ + if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) + return; + + /* + * When RSSI is better then -80 increase VGC level with 0x10 + */ + rt2800_set_vgc(rt2x00dev, qual, + rt2800_get_default_vgc(rt2x00dev) + + ((qual->rssi > -80) * 0x10)); +} +EXPORT_SYMBOL_GPL(rt2800_link_tuner); diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h index 40a7f72e87f..b07caba3781 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.h +++ b/drivers/net/wireless/rt2x00/rt2800lib.h @@ -110,4 +110,29 @@ void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev, const u8 command, const u8 token, const u8 arg0, const u8 arg1); +extern const struct rt2x00debug rt2800_rt2x00debug; + +int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev); +void rt2800_init_led(struct rt2x00_dev *rt2x00dev, + struct rt2x00_led *led, enum led_type type); +int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key); +int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key); +void rt2800_config_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter_flags); +void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, const unsigned int flags); +void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp); +void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant); +void rt2800_config(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf, + const unsigned int flags); +void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual); +void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual); +void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, + const u32 count); + #endif /* RT2800LIB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 90ada5d014f..cbf8be3057e 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -187,830 +187,6 @@ static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) } #endif /* CONFIG_RT2800PCI_PCI */ -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -static const struct rt2x00debug rt2800pci_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = rt2800_register_read, - .write = rt2800_register_write, - .flags = RT2X00DEBUGFS_OFFSET, - .word_base = CSR_REG_BASE, - .word_size = sizeof(u32), - .word_count = CSR_REG_SIZE / sizeof(u32), - }, - .eeprom = { - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_base = EEPROM_BASE, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt2800_bbp_read, - .write = rt2800_bbp_write, - .word_base = BBP_BASE, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt2800_rf_write, - .word_base = RF_BASE, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, -}; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -static int rt2800pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); - return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2); -} - -#ifdef CONFIG_RT2X00_LIB_LEDS -static void rt2800pci_brightness_set(struct led_classdev *led_cdev, - enum led_brightness brightness) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - unsigned int enabled = brightness != LED_OFF; - unsigned int bg_mode = - (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); - unsigned int polarity = - rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, - EEPROM_FREQ_LED_POLARITY); - unsigned int ledmode = - rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, - EEPROM_FREQ_LED_MODE); - - if (led->type == LED_TYPE_RADIO) { - rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, - enabled ? 0x20 : 0); - } else if (led->type == LED_TYPE_ASSOC) { - rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, - enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20); - } else if (led->type == LED_TYPE_QUALITY) { - /* - * The brightness is divided into 6 levels (0 - 5), - * The specs tell us the following levels: - * 0, 1 ,3, 7, 15, 31 - * to determine the level in a simple way we can simply - * work with bitshifting: - * (1 << level) - 1 - */ - rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, - (1 << brightness / (LED_FULL / 6)) - 1, - polarity); - } -} - -static int rt2800pci_blink_set(struct led_classdev *led_cdev, - unsigned long *delay_on, - unsigned long *delay_off) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - u32 reg; - - rt2800_register_read(led->rt2x00dev, LED_CFG, ®); - rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on); - rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off); - rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3); - rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3); - rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12); - rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3); - rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1); - rt2800_register_write(led->rt2x00dev, LED_CFG, reg); - - return 0; -} - -static void rt2800pci_init_led(struct rt2x00_dev *rt2x00dev, - struct rt2x00_led *led, - enum led_type type) -{ - led->rt2x00dev = rt2x00dev; - led->type = type; - led->led_dev.brightness_set = rt2800pci_brightness_set; - led->led_dev.blink_set = rt2800pci_blink_set; - led->flags = LED_INITIALIZED; -} -#endif /* CONFIG_RT2X00_LIB_LEDS */ - -/* - * Configuration handlers. - */ -static void rt2800pci_config_wcid_attr(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct mac_wcid_entry wcid_entry; - struct mac_iveiv_entry iveiv_entry; - u32 offset; - u32 reg; - - offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx); - - rt2800_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, - !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, - (crypto->cmd == SET_KEY) * crypto->cipher); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, - (crypto->cmd == SET_KEY) * crypto->bssidx); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); - rt2800_register_write(rt2x00dev, offset, reg); - - offset = MAC_IVEIV_ENTRY(key->hw_key_idx); - - memset(&iveiv_entry, 0, sizeof(iveiv_entry)); - if ((crypto->cipher == CIPHER_TKIP) || - (crypto->cipher == CIPHER_TKIP_NO_MIC) || - (crypto->cipher == CIPHER_AES)) - iveiv_entry.iv[3] |= 0x20; - iveiv_entry.iv[3] |= key->keyidx << 6; - rt2800_register_multiwrite(rt2x00dev, offset, - &iveiv_entry, sizeof(iveiv_entry)); - - offset = MAC_WCID_ENTRY(key->hw_key_idx); - - memset(&wcid_entry, 0, sizeof(wcid_entry)); - if (crypto->cmd == SET_KEY) - memcpy(&wcid_entry, crypto->address, ETH_ALEN); - rt2800_register_multiwrite(rt2x00dev, offset, - &wcid_entry, sizeof(wcid_entry)); -} - -static int rt2800pci_config_shared_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_key_entry key_entry; - struct rt2x00_field32 field; - u32 offset; - u32 reg; - - if (crypto->cmd == SET_KEY) { - key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx; - - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - offset = SHARED_KEY_ENTRY(key->hw_key_idx); - rt2800_register_multiwrite(rt2x00dev, offset, - &key_entry, sizeof(key_entry)); - } - - /* - * The cipher types are stored over multiple registers - * starting with SHARED_KEY_MODE_BASE each word will have - * 32 bits and contains the cipher types for 2 bssidx each. - * Using the correct defines correctly will cause overhead, - * so just calculate the correct offset. - */ - field.bit_offset = 4 * (key->hw_key_idx % 8); - field.bit_mask = 0x7 << field.bit_offset; - - offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); - - rt2800_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, field, - (crypto->cmd == SET_KEY) * crypto->cipher); - rt2800_register_write(rt2x00dev, offset, reg); - - /* - * Update WCID information - */ - rt2800pci_config_wcid_attr(rt2x00dev, crypto, key); - - return 0; -} - -static int rt2800pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_key_entry key_entry; - u32 offset; - - if (crypto->cmd == SET_KEY) { - /* - * 1 pairwise key is possible per AID, this means that the AID - * equals our hw_key_idx. Make sure the WCID starts _after_ the - * last possible shared key entry. - */ - if (crypto->aid > (256 - 32)) - return -ENOSPC; - - key->hw_key_idx = 32 + crypto->aid; - - - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx); - rt2800_register_multiwrite(rt2x00dev, offset, - &key_entry, sizeof(key_entry)); - } - - /* - * Update WCID information - */ - rt2800pci_config_wcid_attr(rt2x00dev, crypto, key); - - return 0; -} - -static void rt2800pci_config_filter(struct rt2x00_dev *rt2x00dev, - const unsigned int filter_flags) -{ - u32 reg; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2800_register_read(rt2x00dev, RX_FILTER_CFG, ®); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR, - !(filter_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, - !(filter_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, - !(filter_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, - !(filter_flags & FIF_PSPOLL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, - !(filter_flags & FIF_CONTROL)); - rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg); -} - -static void rt2800pci_config_intf(struct rt2x00_dev *rt2x00dev, - struct rt2x00_intf *intf, - struct rt2x00intf_conf *conf, - const unsigned int flags) -{ - unsigned int beacon_base; - u32 reg; - - if (flags & CONFIG_UPDATE_TYPE) { - /* - * Clear current synchronisation setup. - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. - */ - beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); - rt2800_register_write(rt2x00dev, beacon_base, 0); - - /* - * Enable synchronisation. - */ - rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); - rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); - } - - if (flags & CONFIG_UPDATE_MAC) { - reg = le32_to_cpu(conf->mac[1]); - rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); - conf->mac[1] = cpu_to_le32(reg); - - rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0, - conf->mac, sizeof(conf->mac)); - } - - if (flags & CONFIG_UPDATE_BSSID) { - reg = le32_to_cpu(conf->bssid[1]); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0); - conf->bssid[1] = cpu_to_le32(reg); - - rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0, - conf->bssid, sizeof(conf->bssid)); - } -} - -static void rt2800pci_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp) -{ - u32 reg; - - rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); - rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20); - rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); - - rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, ®); - rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, - !!erp->short_preamble); - rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, - !!erp->short_preamble); - rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg); - - rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, - erp->cts_protection ? 2 : 0); - rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, - erp->basic_rates); - rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); - - rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); - rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time); - rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2); - rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); - - rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, ®); - rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4); - rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1); - rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg); - - rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, - erp->beacon_int * 16); - rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); -} - -static void rt2800pci_config_ant(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) -{ - u8 r1; - u8 r3; - - rt2800_bbp_read(rt2x00dev, 1, &r1); - rt2800_bbp_read(rt2x00dev, 3, &r3); - - /* - * Configure the TX antenna. - */ - switch ((int)ant->tx) { - case 1: - rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); - if (rt2x00_intf_is_pci(rt2x00dev)) - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); - break; - case 2: - rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); - break; - case 3: - /* Do nothing */ - break; - } - - /* - * Configure the RX antenna. - */ - switch ((int)ant->rx) { - case 1: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); - break; - case 2: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1); - break; - case 3: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2); - break; - } - - rt2800_bbp_write(rt2x00dev, 3, r3); - rt2800_bbp_write(rt2x00dev, 1, r1); -} - -static void rt2800pci_config_lna_gain(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u16 eeprom; - short lna_gain; - - if (libconf->rf.channel <= 14) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG); - } else if (libconf->rf.channel <= 64) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); - } else if (libconf->rf.channel <= 128) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1); - } else { - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2); - } - - rt2x00dev->lna_gain = lna_gain; -} - -static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); - - if (rt2x00dev->default_ant.tx == 1) - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); - - if (rt2x00dev->default_ant.rx == 1) { - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); - } else if (rt2x00dev->default_ant.rx == 2) - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); - - if (rf->channel > 14) { - /* - * When TX power is below 0, we should increase it by 7 to - * make it a positive value (Minumum value is -7). - * However this means that values between 0 and 7 have - * double meaning, and we should set a 7DBm boost flag. - */ - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST, - (info->tx_power1 >= 0)); - - if (info->tx_power1 < 0) - info->tx_power1 += 7; - - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, - TXPOWER_A_TO_DEV(info->tx_power1)); - - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST, - (info->tx_power2 >= 0)); - - if (info->tx_power2 < 0) - info->tx_power2 += 7; - - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, - TXPOWER_A_TO_DEV(info->tx_power2)); - } else { - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power1)); - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power2)); - } - - rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf)); - - rt2800_rf_write(rt2x00dev, 1, rf->rf1); - rt2800_rf_write(rt2x00dev, 2, rf->rf2); - rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt2800_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt2800_rf_write(rt2x00dev, 1, rf->rf1); - rt2800_rf_write(rt2x00dev, 2, rf->rf2); - rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); - rt2800_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt2800_rf_write(rt2x00dev, 1, rf->rf1); - rt2800_rf_write(rt2x00dev, 2, rf->rf2); - rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt2800_rf_write(rt2x00dev, 4, rf->rf4); -} - -static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - u8 rfcsr; - - rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1); - rt2800_rfcsr_write(rt2x00dev, 2, rf->rf3); - - rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); - rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, - TXPOWER_G_TO_DEV(info->tx_power1)); - rt2800_rfcsr_write(rt2x00dev, 12, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); - rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); - - rt2800_rfcsr_write(rt2x00dev, 24, - rt2x00dev->calibration[conf_is_ht40(conf)]); - - rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); - rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); -} - -static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - u32 reg; - unsigned int tx_pin; - u8 bbp; - - if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) - rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info); - else - rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info); - - /* - * Change BBP settings - */ - rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 86, 0); - - if (rf->channel <= 14) { - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { - rt2800_bbp_write(rt2x00dev, 82, 0x62); - rt2800_bbp_write(rt2x00dev, 75, 0x46); - } else { - rt2800_bbp_write(rt2x00dev, 82, 0x84); - rt2800_bbp_write(rt2x00dev, 75, 0x50); - } - } else { - rt2800_bbp_write(rt2x00dev, 82, 0xf2); - - if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) - rt2800_bbp_write(rt2x00dev, 75, 0x46); - else - rt2800_bbp_write(rt2x00dev, 75, 0x50); - } - - rt2800_register_read(rt2x00dev, TX_BAND_CFG, ®); - rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf)); - rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14); - rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14); - rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg); - - tx_pin = 0; - - /* Turn on unused PA or LNA when not using 1T or 1R */ - if (rt2x00dev->default_ant.tx != 1) { - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); - } - - /* Turn on unused PA or LNA when not using 1T or 1R */ - if (rt2x00dev->default_ant.rx != 1) { - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); - } - - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14); - - rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); - - rt2800_bbp_read(rt2x00dev, 4, &bbp); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); - rt2800_bbp_write(rt2x00dev, 4, bbp); - - rt2800_bbp_read(rt2x00dev, 3, &bbp); - rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf)); - rt2800_bbp_write(rt2x00dev, 3, bbp); - - if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { - if (conf_is_ht40(conf)) { - rt2800_bbp_write(rt2x00dev, 69, 0x1a); - rt2800_bbp_write(rt2x00dev, 70, 0x0a); - rt2800_bbp_write(rt2x00dev, 73, 0x16); - } else { - rt2800_bbp_write(rt2x00dev, 69, 0x16); - rt2800_bbp_write(rt2x00dev, 70, 0x08); - rt2800_bbp_write(rt2x00dev, 73, 0x11); - } - } - - msleep(1); -} - -static void rt2800pci_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - u32 reg; - u32 value = TXPOWER_G_TO_DEV(txpower); - u8 r1; - - rt2800_bbp_read(rt2x00dev, 1, &r1); - rt2x00_set_field8(®, BBP1_TX_POWER, 0); - rt2800_bbp_write(rt2x00dev, 1, r1); - - rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, ®); - rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, reg); - - rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, ®); - rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, reg); - - rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, ®); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, reg); - - rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, ®); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, reg); - - rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, ®); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, reg); -} - -static void rt2800pci_config_retry_limit(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u32 reg; - - rt2800_register_read(rt2x00dev, TX_RTY_CFG, ®); - rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, - libconf->conf->short_frame_max_tx_count); - rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, - libconf->conf->long_frame_max_tx_count); - rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000); - rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0); - rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0); - rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1); - rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg); -} - -static void rt2800pci_config_ps(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - enum dev_state state = - (libconf->conf->flags & IEEE80211_CONF_PS) ? - STATE_SLEEP : STATE_AWAKE; - u32 reg; - - if (state == STATE_SLEEP) { - rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); - - rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, - libconf->conf->listen_interval - 1); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); - rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); - - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); - } else { - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); - - rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); - rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); - } -} - -static void rt2800pci_config(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf, - const unsigned int flags) -{ - /* Always recalculate LNA gain before changing configuration */ - rt2800pci_config_lna_gain(rt2x00dev, libconf); - - if (flags & IEEE80211_CONF_CHANGE_CHANNEL) - rt2800pci_config_channel(rt2x00dev, libconf->conf, - &libconf->rf, &libconf->channel); - if (flags & IEEE80211_CONF_CHANGE_POWER) - rt2800pci_config_txpower(rt2x00dev, libconf->conf->power_level); - if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) - rt2800pci_config_retry_limit(rt2x00dev, libconf); - if (flags & IEEE80211_CONF_CHANGE_PS) - rt2800pci_config_ps(rt2x00dev, libconf); -} - -/* - * Link tuning - */ -static void rt2800pci_link_stats(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - u32 reg; - - /* - * Update FCS error count from register. - */ - rt2800_register_read(rt2x00dev, RX_STA_CNT0, ®); - qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR); -} - -static u8 rt2800pci_get_default_vgc(struct rt2x00_dev *rt2x00dev) -{ - if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) - return 0x2e + rt2x00dev->lna_gain; - - if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) - return 0x32 + (rt2x00dev->lna_gain * 5) / 3; - else - return 0x3a + (rt2x00dev->lna_gain * 5) / 3; -} - -static inline void rt2800pci_set_vgc(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, u8 vgc_level) -{ - if (qual->vgc_level != vgc_level) { - rt2800_bbp_write(rt2x00dev, 66, vgc_level); - qual->vgc_level = vgc_level; - qual->vgc_level_reg = vgc_level; - } -} - -static void rt2800pci_reset_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - rt2800pci_set_vgc(rt2x00dev, qual, - rt2800pci_get_default_vgc(rt2x00dev)); -} - -static void rt2800pci_link_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, const u32 count) -{ - if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) - return; - - /* - * When RSSI is better then -80 increase VGC level with 0x10 - */ - rt2800pci_set_vgc(rt2x00dev, qual, - rt2800pci_get_default_vgc(rt2x00dev) + - ((qual->rssi > -80) * 0x10)); -} - /* * Firmware functions */ @@ -2575,9 +1751,9 @@ static int rt2800pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * Store led settings, for correct led behaviour. */ #ifdef CONFIG_RT2X00_LIB_LEDS - rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); - rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg); #endif /* CONFIG_RT2X00_LIB_LEDS */ @@ -2994,23 +2170,23 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { .get_entry_state = rt2800pci_get_entry_state, .clear_entry = rt2800pci_clear_entry, .set_device_state = rt2800pci_set_device_state, - .rfkill_poll = rt2800pci_rfkill_poll, - .link_stats = rt2800pci_link_stats, - .reset_tuner = rt2800pci_reset_tuner, - .link_tuner = rt2800pci_link_tuner, + .rfkill_poll = rt2800_rfkill_poll, + .link_stats = rt2800_link_stats, + .reset_tuner = rt2800_reset_tuner, + .link_tuner = rt2800_link_tuner, .write_tx_desc = rt2800pci_write_tx_desc, .write_tx_data = rt2x00pci_write_tx_data, .write_beacon = rt2800pci_write_beacon, .kick_tx_queue = rt2800pci_kick_tx_queue, .kill_tx_queue = rt2800pci_kill_tx_queue, .fill_rxdone = rt2800pci_fill_rxdone, - .config_shared_key = rt2800pci_config_shared_key, - .config_pairwise_key = rt2800pci_config_pairwise_key, - .config_filter = rt2800pci_config_filter, - .config_intf = rt2800pci_config_intf, - .config_erp = rt2800pci_config_erp, - .config_ant = rt2800pci_config_ant, - .config = rt2800pci_config, + .config_shared_key = rt2800_config_shared_key, + .config_pairwise_key = rt2800_config_pairwise_key, + .config_filter = rt2800_config_filter, + .config_intf = rt2800_config_intf, + .config_erp = rt2800_config_erp, + .config_ant = rt2800_config_ant, + .config = rt2800_config, }; static const struct data_queue_desc rt2800pci_queue_rx = { @@ -3047,7 +2223,7 @@ static const struct rt2x00_ops rt2800pci_ops = { .lib = &rt2800pci_rt2x00_ops, .hw = &rt2800pci_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2800pci_rt2x00debug, + .debugfs = &rt2800_rt2x00debug, #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ }; diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 6bd646a979a..365f66fe7c6 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -45,832 +45,6 @@ static int modparam_nohwcrypt = 1; module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -static const struct rt2x00debug rt2800usb_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = rt2800_register_read, - .write = rt2800_register_write, - .flags = RT2X00DEBUGFS_OFFSET, - .word_base = CSR_REG_BASE, - .word_size = sizeof(u32), - .word_count = CSR_REG_SIZE / sizeof(u32), - }, - .eeprom = { - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_base = EEPROM_BASE, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt2800_bbp_read, - .write = rt2800_bbp_write, - .word_base = BBP_BASE, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt2800_rf_write, - .word_base = RF_BASE, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, -}; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); - return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2); -} - -#ifdef CONFIG_RT2X00_LIB_LEDS -static void rt2800usb_brightness_set(struct led_classdev *led_cdev, - enum led_brightness brightness) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - unsigned int enabled = brightness != LED_OFF; - unsigned int bg_mode = - (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); - unsigned int polarity = - rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, - EEPROM_FREQ_LED_POLARITY); - unsigned int ledmode = - rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, - EEPROM_FREQ_LED_MODE); - - if (led->type == LED_TYPE_RADIO) { - rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, - enabled ? 0x20 : 0); - } else if (led->type == LED_TYPE_ASSOC) { - rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, - enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20); - } else if (led->type == LED_TYPE_QUALITY) { - /* - * The brightness is divided into 6 levels (0 - 5), - * The specs tell us the following levels: - * 0, 1 ,3, 7, 15, 31 - * to determine the level in a simple way we can simply - * work with bitshifting: - * (1 << level) - 1 - */ - rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, - (1 << brightness / (LED_FULL / 6)) - 1, - polarity); - } -} - -static int rt2800usb_blink_set(struct led_classdev *led_cdev, - unsigned long *delay_on, - unsigned long *delay_off) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - u32 reg; - - rt2800_register_read(led->rt2x00dev, LED_CFG, ®); - rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on); - rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off); - rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3); - rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3); - rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12); - rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3); - rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1); - rt2800_register_write(led->rt2x00dev, LED_CFG, reg); - - return 0; -} - -static void rt2800usb_init_led(struct rt2x00_dev *rt2x00dev, - struct rt2x00_led *led, - enum led_type type) -{ - led->rt2x00dev = rt2x00dev; - led->type = type; - led->led_dev.brightness_set = rt2800usb_brightness_set; - led->led_dev.blink_set = rt2800usb_blink_set; - led->flags = LED_INITIALIZED; -} -#endif /* CONFIG_RT2X00_LIB_LEDS */ - -/* - * Configuration handlers. - */ -static void rt2800usb_config_wcid_attr(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct mac_wcid_entry wcid_entry; - struct mac_iveiv_entry iveiv_entry; - u32 offset; - u32 reg; - - offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx); - - rt2800_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, - !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, - (crypto->cmd == SET_KEY) * crypto->cipher); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, - (crypto->cmd == SET_KEY) * crypto->bssidx); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); - rt2800_register_write(rt2x00dev, offset, reg); - - offset = MAC_IVEIV_ENTRY(key->hw_key_idx); - - memset(&iveiv_entry, 0, sizeof(iveiv_entry)); - if ((crypto->cipher == CIPHER_TKIP) || - (crypto->cipher == CIPHER_TKIP_NO_MIC) || - (crypto->cipher == CIPHER_AES)) - iveiv_entry.iv[3] |= 0x20; - iveiv_entry.iv[3] |= key->keyidx << 6; - rt2800_register_multiwrite(rt2x00dev, offset, - &iveiv_entry, sizeof(iveiv_entry)); - - offset = MAC_WCID_ENTRY(key->hw_key_idx); - - memset(&wcid_entry, 0, sizeof(wcid_entry)); - if (crypto->cmd == SET_KEY) - memcpy(&wcid_entry, crypto->address, ETH_ALEN); - rt2800_register_multiwrite(rt2x00dev, offset, - &wcid_entry, sizeof(wcid_entry)); -} - -static int rt2800usb_config_shared_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_key_entry key_entry; - struct rt2x00_field32 field; - u32 offset; - u32 reg; - - if (crypto->cmd == SET_KEY) { - key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx; - - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - offset = SHARED_KEY_ENTRY(key->hw_key_idx); - rt2800_register_multiwrite(rt2x00dev, offset, - &key_entry, sizeof(key_entry)); - } - - /* - * The cipher types are stored over multiple registers - * starting with SHARED_KEY_MODE_BASE each word will have - * 32 bits and contains the cipher types for 2 bssidx each. - * Using the correct defines correctly will cause overhead, - * so just calculate the correct offset. - */ - field.bit_offset = 4 * (key->hw_key_idx % 8); - field.bit_mask = 0x7 << field.bit_offset; - - offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); - - rt2800_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, field, - (crypto->cmd == SET_KEY) * crypto->cipher); - rt2800_register_write(rt2x00dev, offset, reg); - - /* - * Update WCID information - */ - rt2800usb_config_wcid_attr(rt2x00dev, crypto, key); - - return 0; -} - -static int rt2800usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_key_entry key_entry; - u32 offset; - - if (crypto->cmd == SET_KEY) { - /* - * 1 pairwise key is possible per AID, this means that the AID - * equals our hw_key_idx. Make sure the WCID starts _after_ the - * last possible shared key entry. - */ - if (crypto->aid > (256 - 32)) - return -ENOSPC; - - key->hw_key_idx = 32 + crypto->aid; - - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx); - rt2800_register_multiwrite(rt2x00dev, offset, - &key_entry, sizeof(key_entry)); - } - - /* - * Update WCID information - */ - rt2800usb_config_wcid_attr(rt2x00dev, crypto, key); - - return 0; -} - -static void rt2800usb_config_filter(struct rt2x00_dev *rt2x00dev, - const unsigned int filter_flags) -{ - u32 reg; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2800_register_read(rt2x00dev, RX_FILTER_CFG, ®); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR, - !(filter_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, - !(filter_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, - !(filter_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, - !(filter_flags & FIF_PSPOLL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, - !(filter_flags & FIF_CONTROL)); - rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg); -} - -static void rt2800usb_config_intf(struct rt2x00_dev *rt2x00dev, - struct rt2x00_intf *intf, - struct rt2x00intf_conf *conf, - const unsigned int flags) -{ - unsigned int beacon_base; - u32 reg; - - if (flags & CONFIG_UPDATE_TYPE) { - /* - * Clear current synchronisation setup. - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. - */ - beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); - rt2800_register_write(rt2x00dev, beacon_base, 0); - - /* - * Enable synchronisation. - */ - rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); - rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); - } - - if (flags & CONFIG_UPDATE_MAC) { - reg = le32_to_cpu(conf->mac[1]); - rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); - conf->mac[1] = cpu_to_le32(reg); - - rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0, - conf->mac, sizeof(conf->mac)); - } - - if (flags & CONFIG_UPDATE_BSSID) { - reg = le32_to_cpu(conf->bssid[1]); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0); - conf->bssid[1] = cpu_to_le32(reg); - - rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0, - conf->bssid, sizeof(conf->bssid)); - } -} - -static void rt2800usb_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp) -{ - u32 reg; - - rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); - rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20); - rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); - - rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, ®); - rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, - !!erp->short_preamble); - rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, - !!erp->short_preamble); - rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg); - - rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, - erp->cts_protection ? 2 : 0); - rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, - erp->basic_rates); - rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); - - rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); - rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time); - rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2); - rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); - - rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, ®); - rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4); - rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1); - rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg); - - rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, - erp->beacon_int * 16); - rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); -} - -static void rt2800usb_config_ant(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) -{ - u8 r1; - u8 r3; - - rt2800_bbp_read(rt2x00dev, 1, &r1); - rt2800_bbp_read(rt2x00dev, 3, &r3); - - /* - * Configure the TX antenna. - */ - switch ((int)ant->tx) { - case 1: - rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); - break; - case 2: - rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); - break; - case 3: - /* Do nothing */ - break; - } - - /* - * Configure the RX antenna. - */ - switch ((int)ant->rx) { - case 1: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); - break; - case 2: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1); - break; - case 3: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2); - break; - } - - rt2800_bbp_write(rt2x00dev, 3, r3); - rt2800_bbp_write(rt2x00dev, 1, r1); -} - -static void rt2800usb_config_lna_gain(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u16 eeprom; - short lna_gain; - - if (libconf->rf.channel <= 14) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG); - } else if (libconf->rf.channel <= 64) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); - } else if (libconf->rf.channel <= 128) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1); - } else { - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2); - } - - rt2x00dev->lna_gain = lna_gain; -} - -static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); - - if (rt2x00dev->default_ant.tx == 1) - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); - - if (rt2x00dev->default_ant.rx == 1) { - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); - } else if (rt2x00dev->default_ant.rx == 2) - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); - - if (rf->channel > 14) { - /* - * When TX power is below 0, we should increase it by 7 to - * make it a positive value (Minumum value is -7). - * However this means that values between 0 and 7 have - * double meaning, and we should set a 7DBm boost flag. - */ - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST, - (info->tx_power1 >= 0)); - - if (info->tx_power1 < 0) - info->tx_power1 += 7; - - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, - TXPOWER_A_TO_DEV(info->tx_power1)); - - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST, - (info->tx_power2 >= 0)); - - if (info->tx_power2 < 0) - info->tx_power2 += 7; - - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, - TXPOWER_A_TO_DEV(info->tx_power2)); - } else { - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power1)); - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power2)); - } - - rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf)); - - rt2800_rf_write(rt2x00dev, 1, rf->rf1); - rt2800_rf_write(rt2x00dev, 2, rf->rf2); - rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt2800_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt2800_rf_write(rt2x00dev, 1, rf->rf1); - rt2800_rf_write(rt2x00dev, 2, rf->rf2); - rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); - rt2800_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt2800_rf_write(rt2x00dev, 1, rf->rf1); - rt2800_rf_write(rt2x00dev, 2, rf->rf2); - rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt2800_rf_write(rt2x00dev, 4, rf->rf4); -} - -static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - u8 rfcsr; - - rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1); - rt2800_rfcsr_write(rt2x00dev, 2, rf->rf3); - - rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); - rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, - TXPOWER_G_TO_DEV(info->tx_power1)); - rt2800_rfcsr_write(rt2x00dev, 12, rfcsr); - - rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); - rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); - - rt2800_rfcsr_write(rt2x00dev, 24, - rt2x00dev->calibration[conf_is_ht40(conf)]); - - rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); - rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); -} - -static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - u32 reg; - unsigned int tx_pin; - u8 bbp; - - if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) - rt2800usb_config_channel_rt2x(rt2x00dev, conf, rf, info); - else - rt2800usb_config_channel_rt3x(rt2x00dev, conf, rf, info); - - /* - * Change BBP settings - */ - rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 86, 0); - - if (rf->channel <= 14) { - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { - rt2800_bbp_write(rt2x00dev, 82, 0x62); - rt2800_bbp_write(rt2x00dev, 75, 0x46); - } else { - rt2800_bbp_write(rt2x00dev, 82, 0x84); - rt2800_bbp_write(rt2x00dev, 75, 0x50); - } - } else { - rt2800_bbp_write(rt2x00dev, 82, 0xf2); - - if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) - rt2800_bbp_write(rt2x00dev, 75, 0x46); - else - rt2800_bbp_write(rt2x00dev, 75, 0x50); - } - - rt2800_register_read(rt2x00dev, TX_BAND_CFG, ®); - rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf)); - rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14); - rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14); - rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg); - - tx_pin = 0; - - /* Turn on unused PA or LNA when not using 1T or 1R */ - if (rt2x00dev->default_ant.tx != 1) { - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); - } - - /* Turn on unused PA or LNA when not using 1T or 1R */ - if (rt2x00dev->default_ant.rx != 1) { - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); - } - - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14); - - rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); - - rt2800_bbp_read(rt2x00dev, 4, &bbp); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); - rt2800_bbp_write(rt2x00dev, 4, bbp); - - rt2800_bbp_read(rt2x00dev, 3, &bbp); - rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf)); - rt2800_bbp_write(rt2x00dev, 3, bbp); - - if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { - if (conf_is_ht40(conf)) { - rt2800_bbp_write(rt2x00dev, 69, 0x1a); - rt2800_bbp_write(rt2x00dev, 70, 0x0a); - rt2800_bbp_write(rt2x00dev, 73, 0x16); - } else { - rt2800_bbp_write(rt2x00dev, 69, 0x16); - rt2800_bbp_write(rt2x00dev, 70, 0x08); - rt2800_bbp_write(rt2x00dev, 73, 0x11); - } - } - - msleep(1); -} - -static void rt2800usb_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - u32 reg; - u32 value = TXPOWER_G_TO_DEV(txpower); - u8 r1; - - rt2800_bbp_read(rt2x00dev, 1, &r1); - rt2x00_set_field8(®, BBP1_TX_POWER, 0); - rt2800_bbp_write(rt2x00dev, 1, r1); - - rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, ®); - rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, reg); - - rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, ®); - rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, reg); - - rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, ®); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, reg); - - rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, ®); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, reg); - - rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, ®); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value); - rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, reg); -} - -static void rt2800usb_config_retry_limit(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u32 reg; - - rt2800_register_read(rt2x00dev, TX_RTY_CFG, ®); - rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, - libconf->conf->short_frame_max_tx_count); - rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, - libconf->conf->long_frame_max_tx_count); - rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000); - rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0); - rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0); - rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1); - rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg); -} - -static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - enum dev_state state = - (libconf->conf->flags & IEEE80211_CONF_PS) ? - STATE_SLEEP : STATE_AWAKE; - u32 reg; - - if (state == STATE_SLEEP) { - rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); - - rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, - libconf->conf->listen_interval - 1); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); - rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); - - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); - } else { - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); - - rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); - rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); - } -} - -static void rt2800usb_config(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf, - const unsigned int flags) -{ - /* Always recalculate LNA gain before changing configuration */ - rt2800usb_config_lna_gain(rt2x00dev, libconf); - - if (flags & IEEE80211_CONF_CHANGE_CHANNEL) - rt2800usb_config_channel(rt2x00dev, libconf->conf, - &libconf->rf, &libconf->channel); - if (flags & IEEE80211_CONF_CHANGE_POWER) - rt2800usb_config_txpower(rt2x00dev, libconf->conf->power_level); - if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) - rt2800usb_config_retry_limit(rt2x00dev, libconf); - if (flags & IEEE80211_CONF_CHANGE_PS) - rt2800usb_config_ps(rt2x00dev, libconf); -} - -/* - * Link tuning - */ -static void rt2800usb_link_stats(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - u32 reg; - - /* - * Update FCS error count from register. - */ - rt2800_register_read(rt2x00dev, RX_STA_CNT0, ®); - qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR); -} - -static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev) -{ - if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { - if (rt2x00_intf_is_usb(rt2x00dev) && - rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) - return 0x1c + (2 * rt2x00dev->lna_gain); - else - return 0x2e + rt2x00dev->lna_gain; - } - - if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) - return 0x32 + (rt2x00dev->lna_gain * 5) / 3; - else - return 0x3a + (rt2x00dev->lna_gain * 5) / 3; -} - -static inline void rt2800usb_set_vgc(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, u8 vgc_level) -{ - if (qual->vgc_level != vgc_level) { - rt2800_bbp_write(rt2x00dev, 66, vgc_level); - qual->vgc_level = vgc_level; - qual->vgc_level_reg = vgc_level; - } -} - -static void rt2800usb_reset_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - rt2800usb_set_vgc(rt2x00dev, qual, - rt2800usb_get_default_vgc(rt2x00dev)); -} - -static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, const u32 count) -{ - if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) - return; - - /* - * When RSSI is better then -80 increase VGC level with 0x10 - */ - rt2800usb_set_vgc(rt2x00dev, qual, - rt2800usb_get_default_vgc(rt2x00dev) + - ((qual->rssi > -80) * 0x10)); -} - /* * Firmware functions */ @@ -2205,9 +1379,9 @@ static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev) * Store led settings, for correct led behaviour. */ #ifdef CONFIG_RT2X00_LIB_LEDS - rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); - rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg); @@ -2645,10 +1819,10 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { .uninitialize = rt2x00usb_uninitialize, .clear_entry = rt2x00usb_clear_entry, .set_device_state = rt2800usb_set_device_state, - .rfkill_poll = rt2800usb_rfkill_poll, - .link_stats = rt2800usb_link_stats, - .reset_tuner = rt2800usb_reset_tuner, - .link_tuner = rt2800usb_link_tuner, + .rfkill_poll = rt2800_rfkill_poll, + .link_stats = rt2800_link_stats, + .reset_tuner = rt2800_reset_tuner, + .link_tuner = rt2800_link_tuner, .write_tx_desc = rt2800usb_write_tx_desc, .write_tx_data = rt2x00usb_write_tx_data, .write_beacon = rt2800usb_write_beacon, @@ -2656,13 +1830,13 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { .kick_tx_queue = rt2800usb_kick_tx_queue, .kill_tx_queue = rt2x00usb_kill_tx_queue, .fill_rxdone = rt2800usb_fill_rxdone, - .config_shared_key = rt2800usb_config_shared_key, - .config_pairwise_key = rt2800usb_config_pairwise_key, - .config_filter = rt2800usb_config_filter, - .config_intf = rt2800usb_config_intf, - .config_erp = rt2800usb_config_erp, - .config_ant = rt2800usb_config_ant, - .config = rt2800usb_config, + .config_shared_key = rt2800_config_shared_key, + .config_pairwise_key = rt2800_config_pairwise_key, + .config_filter = rt2800_config_filter, + .config_intf = rt2800_config_intf, + .config_erp = rt2800_config_erp, + .config_ant = rt2800_config_ant, + .config = rt2800_config, }; static const struct data_queue_desc rt2800usb_queue_rx = { @@ -2699,7 +1873,7 @@ static const struct rt2x00_ops rt2800usb_ops = { .lib = &rt2800usb_rt2x00_ops, .hw = &rt2800usb_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2800usb_rt2x00debug, + .debugfs = &rt2800_rt2x00debug, #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ }; |