aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/message/fusion/mptbase.c6
-rw-r--r--drivers/misc/enclosure.c1
-rw-r--r--drivers/scsi/3w-9xxx.c11
-rw-r--r--drivers/scsi/Kconfig10
-rw-r--r--drivers/scsi/Makefile1
-rw-r--r--drivers/scsi/be2iscsi/be_cmds.c12
-rw-r--r--drivers/scsi/bnx2i/bnx2i.h1
-rw-r--r--drivers/scsi/bnx2i/bnx2i_hwi.c51
-rw-r--r--drivers/scsi/bnx2i/bnx2i_init.c16
-rw-r--r--drivers/scsi/bnx2i/bnx2i_iscsi.c2
-rw-r--r--drivers/scsi/cxgb3i/cxgb3i_offload.c24
-rw-r--r--drivers/scsi/cxgb3i/cxgb3i_pdu.c4
-rw-r--r--drivers/scsi/device_handler/scsi_dh_rdac.c2
-rw-r--r--drivers/scsi/fcoe/fcoe.c135
-rw-r--r--drivers/scsi/hpsa.c3531
-rw-r--r--drivers/scsi/hpsa.h273
-rw-r--r--drivers/scsi/hpsa_cmd.h326
-rw-r--r--drivers/scsi/ipr.c1
-rw-r--r--drivers/scsi/libfc/fc_fcp.c65
-rw-r--r--drivers/scsi/libfc/fc_lport.c7
-rw-r--r--drivers/scsi/libfc/fc_rport.c1
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c16
-rw-r--r--drivers/scsi/megaraid/megaraid_sas.c14
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_base.c5
-rw-r--r--drivers/scsi/mvsas/mv_init.c1
-rw-r--r--drivers/scsi/osd/osd_initiator.c88
-rw-r--r--drivers/scsi/pm8001/pm8001_ctl.h10
-rw-r--r--drivers/scsi/pm8001/pm8001_hwi.c149
-rw-r--r--drivers/scsi/pm8001/pm8001_hwi.h3
-rw-r--r--drivers/scsi/pm8001/pm8001_init.c19
-rw-r--r--drivers/scsi/pm8001/pm8001_sas.c57
-rw-r--r--drivers/scsi/pm8001/pm8001_sas.h32
-rw-r--r--drivers/scsi/pmcraid.c34
-rw-r--r--drivers/scsi/pmcraid.h5
-rw-r--r--drivers/scsi/qla2xxx/qla_def.h5
-rw-r--r--drivers/scsi/qla2xxx/qla_gbl.h2
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c12
-rw-r--r--drivers/scsi/qla2xxx/qla_isr.c103
-rw-r--r--drivers/scsi/qla2xxx/qla_mid.c4
-rw-r--r--drivers/scsi/qla2xxx/qla_os.c75
-rw-r--r--drivers/scsi/qla2xxx/qla_version.h2
-rw-r--r--drivers/scsi/scsi_lib.c1
-rw-r--r--drivers/scsi/scsi_transport_fc.c17
-rw-r--r--drivers/scsi/sd.c107
-rw-r--r--drivers/scsi/sd.h2
-rw-r--r--drivers/scsi/st.c23
-rw-r--r--drivers/scsi/st.h1
-rw-r--r--include/linux/enclosure.h2
-rw-r--r--include/scsi/osd_initiator.h5
49 files changed, 4914 insertions, 360 deletions
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 610e914abe6..85bc6a685e3 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1587,7 +1587,7 @@ mpt_mapresources(MPT_ADAPTER *ioc)
{
u8 __iomem *mem;
int ii;
- unsigned long mem_phys;
+ resource_size_t mem_phys;
unsigned long port;
u32 msize;
u32 psize;
@@ -1677,8 +1677,8 @@ mpt_mapresources(MPT_ADAPTER *ioc)
return -EINVAL;
}
ioc->memmap = mem;
- dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %lx\n",
- ioc->name, mem, mem_phys));
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
+ ioc->name, mem, (unsigned long long)mem_phys));
ioc->mem_phys = mem_phys;
ioc->chip = (SYSIF_REGS __iomem *)mem;
diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c
index e9eae4a7840..1eac626e710 100644
--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -391,6 +391,7 @@ static const char *const enclosure_status [] = {
[ENCLOSURE_STATUS_NOT_INSTALLED] = "not installed",
[ENCLOSURE_STATUS_UNKNOWN] = "unknown",
[ENCLOSURE_STATUS_UNAVAILABLE] = "unavailable",
+ [ENCLOSURE_STATUS_MAX] = NULL,
};
static const char *const enclosure_type [] = {
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 3bf75924741..84d3bbaa95e 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -76,6 +76,7 @@
Fix bug in twa_get_param() on 4GB+.
Use pci_resource_len() for ioremap().
2.26.02.012 - Add power management support.
+ 2.26.02.013 - Fix bug in twa_load_sgl().
*/
#include <linux/module.h>
@@ -100,7 +101,7 @@
#include "3w-9xxx.h"
/* Globals */
-#define TW_DRIVER_VERSION "2.26.02.012"
+#define TW_DRIVER_VERSION "2.26.02.013"
static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT];
static unsigned int twa_device_extension_count;
static int twa_major = -1;
@@ -1382,10 +1383,12 @@ static void twa_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full *full_comm
newcommand = &full_command_packet->command.newcommand;
newcommand->request_id__lunl =
cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id));
- newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1);
- newcommand->sg_list[0].length = cpu_to_le32(length);
+ if (length) {
+ newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1);
+ newcommand->sg_list[0].length = cpu_to_le32(length);
+ }
newcommand->sgl_entries__lunh =
- cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->sgl_entries__lunh), 1));
+ cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->sgl_entries__lunh), length ? 1 : 0));
} else {
oldcommand = &full_command_packet->command.oldcommand;
oldcommand->request_id = request_id;
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 36900c71a59..9191d1ea645 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -388,6 +388,16 @@ config BLK_DEV_3W_XXXX_RAID
Please read the comments at the top of
<file:drivers/scsi/3w-xxxx.c>.
+config SCSI_HPSA
+ tristate "HP Smart Array SCSI driver"
+ depends on PCI && SCSI
+ help
+ This driver supports HP Smart Array Controllers (circa 2009).
+ It is a SCSI alternative to the cciss driver, which is a block
+ driver. Anyone wishing to use HP Smart Array controllers who
+ would prefer the devices be presented to linux as SCSI devices,
+ rather than as generic block devices should say Y here.
+
config SCSI_3W_9XXX
tristate "3ware 9xxx SATA-RAID support"
depends on PCI && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 280d3c657d6..92a8c500b23 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -91,6 +91,7 @@ obj-$(CONFIG_SCSI_BFA_FC) += bfa/
obj-$(CONFIG_SCSI_PAS16) += pas16.o
obj-$(CONFIG_SCSI_T128) += t128.o
obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o
+obj-$(CONFIG_SCSI_HPSA) += hpsa.o
obj-$(CONFIG_SCSI_DTC3280) += dtc.o
obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/
obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o
diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
index 698a527d6cc..f008708f1b0 100644
--- a/drivers/scsi/be2iscsi/be_cmds.c
+++ b/drivers/scsi/be2iscsi/be_cmds.c
@@ -135,11 +135,15 @@ int beiscsi_process_mcc(struct beiscsi_hba *phba)
while ((compl = be_mcc_compl_get(phba))) {
if (compl->flags & CQE_FLAGS_ASYNC_MASK) {
/* Interpret flags as an async trailer */
- BUG_ON(!is_link_state_evt(compl->flags));
+ if (is_link_state_evt(compl->flags))
+ /* Interpret compl as a async link evt */
+ beiscsi_async_link_state_process(phba,
+ (struct be_async_event_link_state *) compl);
+ else
+ SE_DEBUG(DBG_LVL_1,
+ " Unsupported Async Event, flags"
+ " = 0x%08x \n", compl->flags);
- /* Interpret compl as a async link evt */
- beiscsi_async_link_state_process(phba,
- (struct be_async_event_link_state *) compl);
} else if (compl->flags & CQE_FLAGS_COMPLETED_MASK) {
status = be_mcc_compl_process(ctrl, compl);
atomic_dec(&phba->ctrl.mcc_obj.q.used);
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index 2b973f3c2eb..6cf9dc37d78 100644
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -684,6 +684,7 @@ extern unsigned int error_mask1, error_mask2;
extern u64 iscsi_error_mask;
extern unsigned int en_tcp_dack;
extern unsigned int event_coal_div;
+extern unsigned int event_coal_min;
extern struct scsi_transport_template *bnx2i_scsi_xport_template;
extern struct iscsi_transport bnx2i_iscsi_transport;
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 5c8d7630c13..1af578dec27 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -133,20 +133,38 @@ void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action)
{
struct bnx2i_5771x_cq_db *cq_db;
u16 cq_index;
+ u16 next_index;
+ u32 num_active_cmds;
+
+ /* Coalesce CQ entries only on 10G devices */
if (!test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
return;
+ /* Do not update CQ DB multiple times before firmware writes
+ * '0xFFFF' to CQDB->SQN field. Deviation may cause spurious
+ * interrupts and other unwanted results
+ */
+ cq_db = (struct bnx2i_5771x_cq_db *) ep->qp.cq_pgtbl_virt;
+ if (cq_db->sqn[0] && cq_db->sqn[0] != 0xFFFF)
+ return;
+
if (action == CNIC_ARM_CQE) {
- cq_index = ep->qp.cqe_exp_seq_sn +
- ep->num_active_cmds / event_coal_div;
- cq_index %= (ep->qp.cqe_size * 2 + 1);
- if (!cq_index) {
+ num_active_cmds = ep->num_active_cmds;
+ if (num_active_cmds <= event_coal_min)
+ next_index = 1;
+ else
+ next_index = event_coal_min +
+ (num_active_cmds - event_coal_min) / event_coal_div;
+ if (!next_index)
+ next_index = 1;
+ cq_index = ep->qp.cqe_exp_seq_sn + next_index - 1;
+ if (cq_index > ep->qp.cqe_size * 2)
+ cq_index -= ep->qp.cqe_size * 2;
+ if (!cq_index)
cq_index = 1;
- cq_db = (struct bnx2i_5771x_cq_db *)
- ep->qp.cq_pgtbl_virt;
- cq_db->sqn[0] = cq_index;
- }
+
+ cq_db->sqn[0] = cq_index;
}
}
@@ -366,6 +384,7 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
struct bnx2i_cmd *bnx2i_cmd;
struct bnx2i_tmf_request *tmfabort_wqe;
u32 dword;
+ u32 scsi_lun[2];
bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data;
tmfabort_hdr = (struct iscsi_tm *)mtask->hdr;
@@ -376,27 +395,35 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
tmfabort_wqe->op_attr = 0;
tmfabort_wqe->op_attr =
ISCSI_TMF_REQUEST_ALWAYS_ONE | ISCSI_TM_FUNC_ABORT_TASK;
- tmfabort_wqe->lun[0] = be32_to_cpu(tmfabort_hdr->lun[0]);
- tmfabort_wqe->lun[1] = be32_to_cpu(tmfabort_hdr->lun[1]);
tmfabort_wqe->itt = (mtask->itt | (ISCSI_TASK_TYPE_MPATH << 14));
tmfabort_wqe->reserved2 = 0;
tmfabort_wqe->cmd_sn = be32_to_cpu(tmfabort_hdr->cmdsn);
ctask = iscsi_itt_to_task(conn, tmfabort_hdr->rtt);
- if (!ctask || ctask->sc)
+ if (!ctask || !ctask->sc)
/*
* the iscsi layer must have completed the cmd while this
* was starting up.
+ *
+ * Note: In the case of a SCSI cmd timeout, the task's sc
+ * is still active; hence ctask->sc != 0
+ * In this case, the task must be aborted
*/
return 0;
+
ref_sc = ctask->sc;
+ /* Retrieve LUN directly from the ref_sc */
+ int_to_scsilun(ref_sc->device->lun, (struct scsi_lun *) scsi_lun);
+ tmfabort_wqe->lun[0] = be32_to_cpu(scsi_lun[0]);
+ tmfabort_wqe->lun[1] = be32_to_cpu(scsi_lun[1]);
+
if (ref_sc->sc_data_direction == DMA_TO_DEVICE)
dword = (ISCSI_TASK_TYPE_WRITE << ISCSI_CMD_REQUEST_TYPE_SHIFT);
else
dword = (ISCSI_TASK_TYPE_READ << ISCSI_CMD_REQUEST_TYPE_SHIFT);
- tmfabort_wqe->ref_itt = (dword | tmfabort_hdr->rtt);
+ tmfabort_wqe->ref_itt = (dword | (tmfabort_hdr->rtt & ISCSI_ITT_MASK));
tmfabort_wqe->ref_cmd_sn = be32_to_cpu(tmfabort_hdr->refcmdsn);
tmfabort_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;
diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c
index 0c4210d48ee..6d8172e781c 100644
--- a/drivers/scsi/bnx2i/bnx2i_init.c
+++ b/drivers/scsi/bnx2i/bnx2i_init.c
@@ -17,8 +17,8 @@ static struct list_head adapter_list = LIST_HEAD_INIT(adapter_list);
static u32 adapter_count;
#define DRV_MODULE_NAME "bnx2i"
-#define DRV_MODULE_VERSION "2.0.1e"
-#define DRV_MODULE_RELDATE "June 22, 2009"
+#define DRV_MODULE_VERSION "2.1.0"
+#define DRV_MODULE_RELDATE "Dec 06, 2009"
static char version[] __devinitdata =
"Broadcom NetXtreme II iSCSI Driver " DRV_MODULE_NAME \
@@ -32,6 +32,10 @@ MODULE_VERSION(DRV_MODULE_VERSION);
static DEFINE_MUTEX(bnx2i_dev_lock);
+unsigned int event_coal_min = 24;
+module_param(event_coal_min, int, 0664);
+MODULE_PARM_DESC(event_coal_min, "Event Coalescing Minimum Commands");
+
unsigned int event_coal_div = 1;
module_param(event_coal_div, int, 0664);
MODULE_PARM_DESC(event_coal_div, "Event Coalescing Divide Factor");
@@ -83,8 +87,12 @@ void bnx2i_identify_device(struct bnx2i_hba *hba)
set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type);
hba->mail_queue_access = BNX2I_MQ_BIN_MODE;
} else if (hba->pci_did == PCI_DEVICE_ID_NX2_57710 ||
- hba->pci_did == PCI_DEVICE_ID_NX2_57711)
+ hba->pci_did == PCI_DEVICE_ID_NX2_57711 ||
+ hba->pci_did == PCI_DEVICE_ID_NX2_57711E)
set_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type);
+ else
+ printk(KERN_ALERT "bnx2i: unknown device, 0x%x\n",
+ hba->pci_did);
}
@@ -363,7 +371,7 @@ static int __init bnx2i_mod_init(void)
printk(KERN_INFO "%s", version);
- if (!is_power_of_2(sq_size))
+ if (sq_size && !is_power_of_2(sq_size))
sq_size = roundup_pow_of_two(sq_size);
mutex_init(&bnx2i_dev_lock);
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index 132898c88d5..33b2294625b 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -485,7 +485,6 @@ static int bnx2i_setup_cmd_pool(struct bnx2i_hba *hba,
struct iscsi_task *task = session->cmds[i];
struct bnx2i_cmd *cmd = task->dd_data;
- /* Anil */
task->hdr = &cmd->hdr;
task->hdr_max = sizeof(struct iscsi_hdr);
@@ -765,7 +764,6 @@ struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic)
hba->pci_svid = hba->pcidev->subsystem_vendor;
hba->pci_func = PCI_FUNC(hba->pcidev->devfn);
hba->pci_devno = PCI_SLOT(hba->pcidev->devfn);
- bnx2i_identify_device(hba);
bnx2i_identify_device(hba);
bnx2i_setup_host_queue_size(hba, shost);
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c
index c1d5be4adf9..26ffdcd5a43 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c
@@ -291,7 +291,7 @@ static void act_open_req_arp_failure(struct t3cdev *dev, struct sk_buff *skb)
c3cn_hold(c3cn);
spin_lock_bh(&c3cn->lock);
if (c3cn->state == C3CN_STATE_CONNECTING)
- fail_act_open(c3cn, EHOSTUNREACH);
+ fail_act_open(c3cn, -EHOSTUNREACH);
spin_unlock_bh(&c3cn->lock);
c3cn_put(c3cn);
__kfree_skb(skb);
@@ -792,18 +792,18 @@ static int act_open_rpl_status_to_errno(int status)
{
switch (status) {
case CPL_ERR_CONN_RESET:
- return ECONNREFUSED;
+ return -ECONNREFUSED;
case CPL_ERR_ARP_MISS:
- return EHOSTUNREACH;
+ return -EHOSTUNREACH;
case CPL_ERR_CONN_TIMEDOUT:
- return ETIMEDOUT;
+ return -ETIMEDOUT;
case CPL_ERR_TCAM_FULL:
- return ENOMEM;
+ return -ENOMEM;
case CPL_ERR_CONN_EXIST:
cxgb3i_log_error("ACTIVE_OPEN_RPL: 4-tuple in use\n");
- return EADDRINUSE;
+ return -EADDRINUSE;
default:
- return EIO;
+ return -EIO;
}
}
@@ -817,7 +817,7 @@ static void act_open_retry_timer(unsigned long data)
spin_lock_bh(&c3cn->lock);
skb = alloc_skb(sizeof(struct cpl_act_open_req), GFP_ATOMIC);
if (!skb)
- fail_act_open(c3cn, ENOMEM);
+ fail_act_open(c3cn, -ENOMEM);
else {
skb->sk = (struct sock *)c3cn;
set_arp_failure_handler(skb, act_open_req_arp_failure);
@@ -966,14 +966,14 @@ static int abort_status_to_errno(struct s3_conn *c3cn, int abort_reason,
case CPL_ERR_BAD_SYN: /* fall through */
case CPL_ERR_CONN_RESET:
return c3cn->state > C3CN_STATE_ESTABLISHED ?
- EPIPE : ECONNRESET;
+ -EPIPE : -ECONNRESET;
case CPL_ERR_XMIT_TIMEDOUT:
case CPL_ERR_PERSIST_TIMEDOUT:
case CPL_ERR_FINWAIT2_TIMEDOUT:
case CPL_ERR_KEEPALIVE_TIMEDOUT:
- return ETIMEDOUT;
+ return -ETIMEDOUT;
default:
- return EIO;
+ return -EIO;
}
}
@@ -1563,7 +1563,7 @@ free_tid:
s3_free_atid(cdev, c3cn->tid);
c3cn->tid = 0;
out_err:
- return -1;
+ return -EINVAL;
}
diff --git a/drivers/scsi/cxgb3i/cxgb3i_pdu.c b/drivers/scsi/cxgb3i/cxgb3i_pdu.c
index 70910507117..1fe3b0f1f3c 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_pdu.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_pdu.c
@@ -388,8 +388,8 @@ int cxgb3i_conn_xmit_pdu(struct iscsi_task *task)
if (err > 0) {
int pdulen = err;
- cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n",
- task, skb, skb->len, skb->data_len, err);
+ cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n",
+ task, skb, skb->len, skb->data_len, err);
if (task->conn->hdrdgst_en)
pdulen += ISCSI_DIGEST_SIZE;
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 47cfe1c49c3..1a660191a90 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -748,6 +748,8 @@ static const struct scsi_dh_devlist rdac_dev_list[] = {
{"IBM", "1724"},
{"IBM", "1726"},
{"IBM", "1742"},
+ {"IBM", "1745"},
+ {"IBM", "1746"},
{"IBM", "1814"},
{"IBM", "1815"},
{"IBM", "1818"},
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index a30ffaa1222..e3896fcb06e 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -101,6 +101,8 @@ static int fcoe_cpu_callback(struct notifier_block *, unsigned long, void *);
static int fcoe_create(const char *, struct kernel_param *);
static int fcoe_destroy(const char *, struct kernel_param *);
+static int fcoe_enable(const char *, struct kernel_param *);
+static int fcoe_disable(const char *, struct kernel_param *);
static struct fc_seq *fcoe_elsct_send(struct fc_lport *,
u32 did, struct fc_frame *,
@@ -115,10 +117,16 @@ static void fcoe_get_lesb(struct fc_lport *, struct fc_els_lesb *);
module_param_call(create, fcoe_create, NULL, NULL, S_IWUSR);
__MODULE_PARM_TYPE(create, "string");
-MODULE_PARM_DESC(create, "Create fcoe fcoe using net device passed in.");
+MODULE_PARM_DESC(create, " Creates fcoe instance on a ethernet interface");
module_param_call(destroy, fcoe_destroy, NULL, NULL, S_IWUSR);
__MODULE_PARM_TYPE(destroy, "string");
-MODULE_PARM_DESC(destroy, "Destroy fcoe fcoe");
+MODULE_PARM_DESC(destroy, " Destroys fcoe instance on a ethernet interface");
+module_param_call(enable, fcoe_enable, NULL, NULL, S_IWUSR);
+__MODULE_PARM_TYPE(enable, "string");
+MODULE_PARM_DESC(enable, " Enables fcoe on a ethernet interface.");
+module_param_call(disable, fcoe_disable, NULL, NULL, S_IWUSR);
+__MODULE_PARM_TYPE(disable, "string");
+MODULE_PARM_DESC(disable, " Disables fcoe on a ethernet interface.");
/* notification function for packets from net device */
static struct notifier_block fcoe_notifier = {
@@ -545,6 +553,23 @@ static void fcoe_queue_timer(ulong lport)
}
/**
+ * fcoe_get_wwn() - Get the world wide name from LLD if it supports it
+ * @netdev: the associated net device
+ * @wwn: the output WWN
+ * @type: the type of WWN (WWPN or WWNN)
+ *
+ * Returns: 0 for success
+ */
+static int fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type)
+{
+ const struct net_device_ops *ops = netdev->netdev_ops;
+
+ if (ops->ndo_fcoe_get_wwn)
+ return ops->ndo_fcoe_get_wwn(netdev, wwn, type);
+ return -EINVAL;
+}
+
+/**
* fcoe_netdev_config() - Set up net devive for SW FCoE
* @lport: The local port that is associated with the net device
* @netdev: The associated net device
@@ -611,9 +636,13 @@ static int fcoe_netdev_config(struct fc_lport *lport, struct net_device *netdev)
*/
if (netdev->priv_flags & IFF_802_1Q_VLAN)
vid = vlan_dev_vlan_id(netdev);
- wwnn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, 1, 0);
+
+ if (fcoe_get_wwn(netdev, &wwnn, NETDEV_FCOE_WWNN))
+ wwnn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, 1, 0);
fc_set_wwnn(lport, wwnn);
- wwpn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, 2, vid);
+ if (fcoe_get_wwn(netdev, &wwpn, NETDEV_FCOE_WWPN))
+ wwpn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr,
+ 2, vid);
fc_set_wwpn(lport, wwpn);
}
@@ -1838,6 +1867,104 @@ static struct net_device *fcoe_if_to_netdev(const char *buffer)
}
/**
+ * fcoe_disable() - Disables a FCoE interface
+ * @buffer: The name of the Ethernet interface to be disabled
+ * @kp: The associated kernel parameter
+ *
+ * Called from sysfs.
+ *
+ * Returns: 0 for success
+ */
+static int fcoe_disable(const char *buffer, struct kernel_param *kp)
+{
+ struct fcoe_interface *fcoe;
+ struct net_device *netdev;
+ int rc = 0;
+
+ mutex_lock(&fcoe_config_mutex);
+#ifdef CONFIG_FCOE_MODULE
+ /*
+ * Make sure the module has been initialized, and is not about to be
+ * removed. Module paramter sysfs files are writable before the
+ * module_init function is called and after module_exit.
+ */
+ if (THIS_MODULE->state != MODULE_STATE_LIVE) {
+ rc = -ENODEV;
+ goto out_nodev;
+ }
+#endif
+
+ netdev = fcoe_if_to_netdev(buffer);
+ if (!netdev) {
+ rc = -ENODEV;
+ goto out_nodev;
+ }
+
+ rtnl_lock();
+ fcoe = fcoe_hostlist_lookup_port(netdev);
+ rtnl_unlock();
+
+ if (fcoe)
+ fc_fabric_logoff(fcoe->ctlr.lp);
+ else
+ rc = -ENODEV;
+
+ dev_put(netdev);
+out_nodev:
+ mutex_unlock(&fcoe_config_mutex);
+ return rc;
+}
+
+/**
+ * fcoe_enable() - Enables a FCoE interface
+ * @buffer: The name of the Ethernet interface to be enabled
+ * @kp: The associated kernel parameter
+ *
+ * Called from sysfs.
+ *
+ * Returns: 0 for success
+ */
+static int fcoe_enable(const char *buffer, struct kernel_param *kp)
+{
+ struct fcoe_interface *fcoe;
+ struct net_device *netdev;
+ int rc = 0;
+
+ mutex_lock(&fcoe_config_mutex);
+#ifdef CONFIG_FCOE_MODULE
+ /*
+ * Make sure the module has been initialized, and is not about to be
+ * removed. Module paramter sysfs files are writable before the
+ * module_init function is called and after module_exit.
+ */
+ if (THIS_MODULE->state != MODULE_STATE_LIVE) {
+ rc = -ENODEV;
+ goto out_nodev;
+ }
+#endif
+
+ netdev = fcoe_if_to_netdev(buffer);
+ if (!netdev) {
+ rc = -ENODEV;
+ goto out_nodev;
+ }
+
+ rtnl_lock();
+ fcoe = fcoe_hostlist_lookup_port(netdev);
+ rtnl_unlock();
+
+ if (fcoe)
+ rc = fc_fabric_login(fcoe->ctlr.lp);
+ else
+ rc = -ENODEV;
+
+ dev_put(netdev);
+out_nodev:
+ mutex_unlock(&fcoe_config_mutex);
+ return rc;
+}
+
+/**
* fcoe_destroy() - Destroy a FCoE interface
* @buffer: The name of the Ethernet interface to be destroyed
* @kp: The associated kernel parameter
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
new file mode 100644
index 00000000000..bb96fdd58e2
--- /dev/null
+++ b/drivers/scsi/hpsa.c
@@ -0,0 +1,3531 @@
+/*
+ * Disk Array driver for HP Smart Array SAS controllers
+ * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Questions/Comments/Bugfixes to iss_storagedev@hp.com
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/timer.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/smp_lock.h>
+#include <linux/compat.h>
+#include <linux/blktrace_api.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/completion.h>
+#include <linux/moduleparam.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <linux/cciss_ioctl.h>
+#include <linux/string.h>
+#include <linux/bitmap.h>
+#include <asm/atomic.h>
+#include <linux/kthread.h>
+#include "hpsa_cmd.h"
+#include "hpsa.h"
+
+/* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' */
+#define HPSA_DRIVER_VERSION "1.0.0"
+#define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")"
+
+/* How long to wait (in milliseconds) for board to go into simple mode */
+#define MAX_CONFIG_WAIT 30000
+#define MAX_IOCTL_CONFIG_WAIT 1000
+
+/*define how many times we will try a command because of bus resets */
+#define MAX_CMD_RETRIES 3
+
+/* Embedded module documentation macros - see modules.h */
+MODULE_AUTHOR("Hewlett-Packard Company");
+MODULE_DESCRIPTION("Driver for HP Smart Array Controller version " \
+ HPSA_DRIVER_VERSION);
+MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers");
+MODULE_VERSION(HPSA_DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+static int hpsa_allow_any;
+module_param(hpsa_allow_any, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(hpsa_allow_any,
+ "Allow hpsa driver to access unknown HP Smart Array hardware");
+
+/* define the PCI info for the cards we can control */
+static const struct pci_device_id hpsa_pci_device_id[] = {
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3223},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3234},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324a},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324b},
+ {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
+ {0,}
+};
+
+MODULE_DEVICE_TABLE(pci, hpsa_pci_device_id);
+
+/* board_id = Subsystem Device ID & Vendor ID
+ * product = Marketing Name for the board
+ * access = Address of the struct of function pointers
+ */
+static struct board_type products[] = {
+ {0x3223103C, "Smart Array P800", &SA5_access},
+ {0x3234103C, "Smart Array P400", &SA5_access},
+ {0x323d103c, "Smart Array P700M", &SA5_access},
+ {0x3241103C, "Smart Array P212", &SA5_access},
+ {0x3243103C, "Smart Array P410", &SA5_access},
+ {0x3245103C, "Smart Array P410i", &SA5_access},
+ {0x3247103C, "Smart Array P411", &SA5_access},
+ {0x3249103C, "Smart Array P812", &SA5_access},
+ {0x324a103C, "Smart Array P712m", &SA5_access},
+ {0x324b103C, "Smart Array P711m", &SA5_access},
+ {0xFFFF103C, "Unknown Smart Array", &SA5_access},
+};
+
+static int number_of_controllers;
+
+static irqreturn_t do_hpsa_intr(int irq, void *dev_id);
+static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg);
+static void start_io(struct ctlr_info *h);
+
+#ifdef CONFIG_COMPAT
+static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg);
+#endif
+
+static void cmd_free(struct ctlr_info *h, struct CommandList *c);
+static void cmd_special_free(struct ctlr_info *h, struct CommandList *c);
+static struct CommandList *cmd_alloc(struct ctlr_info *h);
+static struct CommandList *cmd_special_alloc(struct ctlr_info *h);
+static void fill_cmd(struct CommandList *c, __u8 cmd, struct ctlr_info *h,
+ void *buff, size_t size, __u8 page_code, unsigned char *scsi3addr,
+ int cmd_type);
+
+static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd,
+ void (*done)(struct scsi_cmnd *));
+
+static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd);
+static int hpsa_slave_alloc(struct scsi_device *sdev);
+static void hpsa_slave_destroy(struct scsi_device *sdev);
+
+static ssize_t raid_level_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t lunid_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t unique_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno);
+static ssize_t host_store_rescan(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count);
+static int check_for_unit_attention(struct ctlr_info *h,
+ struct CommandList *c);
+static void check_ioctl_unit_attention(struct ctlr_info *h,
+ struct CommandList *c);
+
+static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL);
+static DEVICE_ATTR(lunid, S_IRUGO, lunid_show, NULL);
+static DEVICE_ATTR(unique_id, S_IRUGO, unique_id_show, NULL);
+static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
+
+static struct device_attribute *hpsa_sdev_attrs[] = {
+ &dev_attr_raid_level,
+ &dev_attr_lunid,
+ &dev_attr_unique_id,
+ NULL,
+};
+
+static struct device_attribute *hpsa_shost_attrs[] = {
+ &dev_attr_rescan,
+ NULL,
+};
+
+static struct scsi_host_template hpsa_driver_template = {
+ .module = THIS_MODULE,
+ .name = "hpsa",
+ .proc_name = "hpsa",
+ .queuecommand = hpsa_scsi_queue_command,
+ .can_queue = 512,
+ .this_id = -1,
+ .sg_tablesize = MAXSGENTRIES,
+ .cmd_per_lun = 512,
+ .use_clustering = ENABLE_CLUSTERING,
+ .eh_device_reset_handler = hpsa_eh_device_reset_handler,
+ .ioctl = hpsa_ioctl,
+ .slave_alloc = hpsa_slave_alloc,
+ .slave_destroy = hpsa_slave_destroy,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = hpsa_compat_ioctl,
+#endif
+ .sdev_attrs = hpsa_sdev_attrs,
+ .shost_attrs = hpsa_shost_attrs,
+};
+
+static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev)
+{
+ unsigned long *priv = shost_priv(sdev->host);
+ return (struct ctlr_info *) *priv;
+}
+
+static struct task_struct *hpsa_scan_thread;
+static DEFINE_MUTEX(hpsa_scan_mutex);
+static LIST_HEAD(hpsa_scan_q);
+static int hpsa_scan_func(void *data);
+
+/**
+ * add_to_scan_list() - add controller to rescan queue
+ * @h: Pointer to the controller.
+ *
+ * Adds the controller to the rescan queue if not already on the queue.
+ *
+ * returns 1 if added to the queue, 0 if skipped (could be on the
+ * queue already, or the controller could be initializing or shutting
+ * down).
+ **/
+static int add_to_scan_list(struct ctlr_info *h)
+{
+ struct ctlr_info *test_h;
+ int found = 0;
+ int ret = 0;
+
+ if (h->busy_initializing)
+ return 0;
+
+ /*
+ * If we don't get the lock, it means the driver is unloading
+ * and there's no point in scheduling a new scan.
+ */
+ if (!mutex_trylock(&h->busy_shutting_down))
+ return 0;
+
+ mutex_lock(&hpsa_scan_mutex);
+ list_for_each_entry(test_h, &hpsa_scan_q, scan_list) {
+ if (test_h == h) {
+ found = 1;
+ break;
+ }
+ }
+ if (!found && !h->busy_scanning) {
+ INIT_COMPLETION(h->scan_wait);
+ list_add_tail(&h->scan_list, &hpsa_scan_q);
+ ret = 1;
+ }
+ mutex_unlock(&hpsa_scan_mutex);
+ mutex_unlock(&h->busy_shutting_down);
+
+ return ret;
+}
+
+/**
+ * remove_from_scan_list() - remove controller from rescan queue
+ * @h: Pointer to the controller.
+ *
+ * Removes the controller from the rescan queue if present. Blocks if
+ * the controller is currently conducting a rescan. The controller
+ * can be in one of three states:
+ * 1. Doesn't need a scan
+ * 2. On the scan list, but not scanning yet (we remove it)
+ * 3. Busy scanning (and not on the list). In this case we want to wait for
+ * the scan to complete to make sure the scanning thread for this
+ * controller is completely idle.
+ **/
+static void remove_from_scan_list(struct ctlr_info *h)
+{
+ struct ctlr_info *test_h, *tmp_h;
+
+ mutex_lock(&hpsa_scan_mutex);
+ list_for_each_entry_safe(test_h, tmp_h, &hpsa_scan_q, scan_list) {
+ if (test_h == h) { /* state 2. */
+ list_del(&h->scan_list);
+ complete_all(&h->scan_wait);
+ mutex_unlock(&hpsa_scan_mutex);
+ return;
+ }
+ }
+ if (h->busy_scanning) { /* state 3. */
+ mutex_unlock(&hpsa_scan_mutex);
+ wait_for_completion(&h->scan_wait);
+ } else { /* state 1, nothing to do. */
+ mutex_unlock(&hpsa_scan_mutex);
+ }
+}
+
+/* hpsa_scan_func() - kernel thread used to rescan controllers
+ * @data: Ignored.
+ *
+ * A kernel thread used scan for drive topology changes on
+ * controllers. The thread processes only one controller at a time
+ * using a queue. Controllers are added to the queue using
+ * add_to_scan_list() and removed from the queue either after done
+ * processing or using remove_from_scan_list().
+ *
+ * returns 0.
+ **/
+static int hpsa_scan_func(__attribute__((unused)) void *data)
+{
+ struct ctlr_info *h;
+ int host_no;
+
+ while (1) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule();
+ if (kthread_should_stop())
+ break;
+
+ while (1) {
+ mutex_lock(&hpsa_scan_mutex);
+ if (list_empty(&hpsa_scan_q)) {
+ mutex_unlock(&hpsa_scan_mutex);
+ break;
+ }
+ h = list_entry(hpsa_scan_q.next, struct ctlr_info,
+ scan_list);
+ list_del(&h->scan_list);
+ h->busy_scanning = 1;
+ mutex_unlock(&hpsa_scan_mutex);
+ host_no = h->scsi_host ? h->scsi_host->host_no : -1;
+ hpsa_update_scsi_devices(h, host_no);
+ complete_all(&h->scan_wait);
+ mutex_lock(&hpsa_scan_mutex);
+ h->busy_scanning = 0;
+ mutex_unlock(&hpsa_scan_mutex);
+ }
+ }
+ return 0;
+}
+
+static int check_for_unit_attention(struct ctlr_info *h,
+ struct CommandList *c)
+{
+ if (c->err_info->SenseInfo[2] != UNIT_ATTENTION)
+ return 0;
+
+ switch (c->err_info->SenseInfo[12]) {
+ case STATE_CHANGED:
+ dev_warn(&h->pdev->dev, "hpsa%d: a state change "
+ "detected, command retried\n", h->ctlr);
+ break;
+ case LUN_FAILED:
+ dev_warn(&h->pdev->dev, "hpsa%d: LUN failure "
+ "detected, action required\n", h->ctlr);
+ break;
+ case REPORT_LUNS_CHANGED:
+ dev_warn(&h->pdev->dev, "hpsa%d: report LUN data "
+ "changed\n", h->ctlr);
+ /*
+ * Here, we could call add_to_scan_list and wake up the scan thread,
+ * except that it's quite likely that we will get more than one
+ * REPORT_LUNS_CHANGED condition in quick succession, which means
+ * that those which occur after the first one will likely happen
+ * *during* the hpsa_scan_thread's rescan. And the rescan code is not
+ * robust enough to restart in the middle, undoing what it has already
+ * done, and it's not clear that it's even possible to do this, since
+ * part of what it does is notify the SCSI mid layer, which starts
+ * doing it's own i/o to read partition tables and so on, and the
+ * driver doesn't have visibility to know what might need undoing.
+ * In any event, if possible, it is horribly complicated to get right
+ * so we just don't do it for now.
+ *
+ * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012.
+ */
+ break;
+ case POWER_OR_RESET:
+ dev_warn(&h->pdev->dev, "hpsa%d: a power on "
+ "or device reset detected\n", h->ctlr);
+ break;
+ case UNIT_ATTENTION_CLEARED:
+ dev_warn(&h->pdev->dev, "hpsa%d: unit attention "
+ "cleared by another initiator\n", h->ctlr);
+ break;
+ default:
+ dev_warn(&h->pdev->dev, "hpsa%d: unknown "
+ "unit attention detected\n", h->ctlr);
+ break;
+ }
+ return 1;
+}
+
+static ssize_t host_store_rescan(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ctlr_info *h;
+ struct Scsi_Host *shost = class_to_shost(dev);
+ unsigned long *priv = shost_priv(shost);
+ h = (struct ctlr_info *) *priv;
+ if (add_to_scan_list(h)) {
+ wake_up_process(hpsa_scan_thread);
+ wait_for_completion_interruptible(&h->scan_wait);
+ }
+ return count;
+}
+
+/* Enqueuing and dequeuing functions for cmdlists. */
+static inline void addQ(struct hlist_head *list, struct CommandList *c)
+{
+ hlist_add_head(&c->list, list);
+}
+
+static void enqueue_cmd_and_start_io(struct ctlr_info *h,
+ struct CommandList *c)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&h->lock, flags);
+ addQ(&h->reqQ, c);
+ h->Qdepth++;
+ start_io(h);
+ spin_unlock_irqrestore(&h->lock, flags);
+}
+
+static inline void removeQ(struct CommandList *c)
+{
+ if (WARN_ON(hlist_unhashed(&c->list)))
+ return;
+ hlist_del_init(&c->list);
+}
+
+static inline int is_hba_lunid(unsigned char scsi3addr[])
+{
+ return memcmp(scsi3addr, RAID_CTLR_LUNID, 8) == 0;
+}
+
+static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[])
+{
+ return (scsi3addr[3] & 0xC0) == 0x40;
+}
+
+static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
+ "UNKNOWN"
+};
+#define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 1)
+
+static ssize_t raid_level_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ ssize_t l = 0;
+ int rlevel;
+ struct ctlr_info *h;
+ struct scsi_device *sdev;
+ struct hpsa_scsi_dev_t *hdev;
+ unsigned long flags;
+
+ sdev = to_scsi_device(dev);
+ h = sdev_to_hba(sdev);
+ spin_lock_irqsave(&h->lock, flags);
+ hdev = sdev->hostdata;
+ if (!hdev) {
+ spin_unlock_irqrestore(&h->lock, flags);
+ return -ENODEV;
+ }
+
+ /* Is this even a logical drive? */
+ if (!is_logical_dev_addr_mode(hdev->scsi3addr)) {
+ spin_unlock_irqrestore(&h->lock, flags);
+ l = snprintf(buf, PAGE_SIZE, "N/A\n");
+ return l;
+ }
+
+ rlevel = hdev->raid_level;
+ spin_unlock_irqrestore(&h->lock, flags);
+ if (rlevel < 0 || rlevel > RAID_UNKNOWN)
+ rlevel = RAID_UNKNOWN;
+ l = snprintf(buf, PAGE_SIZE, "RAID %s\n", raid_label[rlevel]);
+ return l;
+}
+
+static ssize_t lunid_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ctlr_info *h;
+ struct scsi_device *sdev;
+ struct hpsa_scsi_dev_t *hdev;
+ unsigned long flags;
+ unsigned char lunid[8];
+
+ sdev = to_scsi_device(dev);
+ h = sdev_to_hba(sdev);
+ spin_lock_irqsave(&h->lock, flags);
+ hdev = sdev->hostdata;
+ if (!hdev) {
+ spin_unlock_irqrestore(&h->lock, flags);
+ return -ENODEV;
+ }
+ memcpy(lunid, hdev->scsi3addr, sizeof(lunid));
+ spin_unlock_irqrestore(&h->lock, flags);
+ return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+ lunid[0], lunid[1], lunid[2], lunid[3],
+ lunid[4], lunid[5], lunid[6], lunid[7]);
+}
+
+static ssize_t unique_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ctlr_info *h;
+ struct scsi_device *sdev;
+ struct hpsa_scsi_dev_t *hdev;
+ unsigned long flags;
+ unsigned char sn[16];
+
+ sdev = to_scsi_device(dev);
+ h = sdev_to_hba(sdev);
+ spin_lock_irqsave(&h->lock, flags);
+ hdev = sdev->hostdata;
+ if (!hdev) {
+ spin_unlock_irqrestore(&h->lock, flags);
+ return -ENODEV;
+ }
+ memcpy(sn, hdev->device_id, sizeof(sn));
+ spin_unlock_irqrestore(&h->lock, flags);
+ return snprintf(buf, 16 * 2 + 2,
+ "%02X%02X%02X%02X%02X%02X%02X%02X"
+ "%02X%02X%02X%02X%02X%02X%02X%02X\n",
+ sn[0], sn[1], sn[2], sn[3],
+ sn[4], sn[5], sn[6], sn[7],
+ sn[8], sn[9], sn[10], sn[11],
+ sn[12], sn[13], sn[14], sn[15]);
+}
+
+static int hpsa_find_target_lun(struct ctlr_info *h,
+ unsigned char scsi3addr[], int bus, int *target, int *lun)
+{
+ /* finds an unused bus, target, lun for a new physical device
+ * assumes h->devlock is held
+ */
+ int i, found = 0;
+ DECLARE_BITMAP(lun_taken, HPSA_MAX_SCSI_DEVS_PER_HBA);
+
+ memset(&lun_taken[0], 0, HPSA_MAX_SCSI_DEVS_PER_HBA >> 3);
+
+ for (i = 0; i < h->ndevices; i++) {
+ if (h->dev[i]->bus == bus && h->dev[i]->target != -1)
+ set_bit(h->dev[i]->target, lun_taken);
+ }
+
+ for (i = 0; i < HPSA_MAX_SCSI_DEVS_PER_HBA; i++) {
+ if (!test_bit(i, lun_taken)) {
+ /* *bus = 1; */
+ *target = i;
+ *lun = 0;
+ found = 1;
+ break;
+ }
+ }
+ return !found;
+}
+
+/* Add an entry into h->dev[] array. */
+static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno,
+ struct hpsa_scsi_dev_t *device,
+ struct hpsa_scsi_dev_t *added[], int *nadded)
+{
+ /* assumes h->devlock is held */
+ int n = h->ndevices;
+ int i;
+ unsigned char addr1[8], addr2[8];
+ struct hpsa_scsi_dev_t *sd;
+
+ if (n >= HPSA_MAX_SCSI_DEVS_PER_HBA) {
+ dev_err(&h->pdev->dev, "too many devices, some will be "
+ "inaccessible.\n");
+ return -1;
+ }
+
+ /* physical devices do not have lun or target assigned until now. */
+ if (device->lun != -1)
+ /* Logical device, lun is already assigned. */
+ goto lun_assigned;
+
+ /* If this device a non-zero lun of a multi-lun device
+ * byte 4 of the 8-byte LUN addr will contain the logical
+ * unit no, zero otherise.
+ */
+ if (device->scsi3addr[4] == 0) {
+ /* This is not a non-zero lun of a multi-lun device */
+ if (hpsa_find_target_lun(h, device->scsi3addr,
+ device->bus, &device->target, &device->lun) != 0)
+ return -1;
+ goto lun_assigned;
+ }
+
+ /* This is a non-zero lun of a multi-lun device.
+ * Search through our list and find the device which
+ * has the same 8 byte LUN address, excepting byte 4.
+ * Assign the same bus and target for this new LUN.
+ * Use the logical unit number from the firmware.
+ */
+ memcpy(addr1, device->scsi3addr, 8);
+ addr1[4] = 0;
+ for (i = 0; i < n; i++) {
+ sd = h->dev[i];
+ memcpy(addr2, sd->scsi3addr, 8);
+ addr2[4] = 0;
+ /* differ only in byte 4? */
+ if (memcmp(addr1, addr2, 8) == 0) {
+ device->bus = sd->bus;
+ device->target = sd->target;
+ device->lun = device->scsi3addr[4];
+ break;
+ }
+ }
+ if (device->lun == -1) {
+ dev_warn(&h->pdev->dev, "physical device with no LUN=0,"
+ " suspect firmware bug or unsupported hardware "
+ "configuration.\n");
+ return -1;
+ }
+
+lun_assigned:
+
+ h->dev[n] = device;
+ h->ndevices++;
+ added[*nadded] = device;
+ (*nadded)++;
+
+ /* initially, (before registering with scsi layer) we don't
+ * know our hostno and we don't want to print anything first
+ * time anyway (the scsi layer's inquiries will show that info)
+ */
+ /* if (hostno != -1) */
+ dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n",
+ scsi_device_type(device->devtype), hostno,
+ device->bus, device->target, device->lun);
+ return 0;
+}
+
+/* Remove an entry from h->dev[] array. */
+static void hpsa_scsi_remove_entry(struct ctlr_info *h, int hostno, int entry,
+ struct hpsa_scsi_dev_t *removed[], int *nremoved)
+{
+ /* assumes h->devlock is held */
+ int i;
+ struct hpsa_scsi_dev_t *sd;
+
+ if (entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA)
+ BUG();
+
+ sd = h->dev[entry];
+ removed[*nremoved] = h->dev[entry];
+ (*nremoved)++;
+
+ for (i = entry; i < h->ndevices-1; i++)
+ h->dev[i] = h->dev[i+1];
+ h->ndevices--;
+ dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d removed.\n",
+ scsi_device_type(sd->devtype), hostno, sd->bus, sd->target,
+ sd->lun);
+}
+
+#define SCSI3ADDR_EQ(a, b) ( \
+ (a)[7] == (b)[7] && \
+ (a)[6] == (b)[6] && \
+ (a)[5] == (b)[5] && \
+ (a)[4] == (b)[4] && \
+ (a)[3] == (b)[3] && \
+ (a)[2] == (b)[2] && \
+ (a)[1] == (b)[1] && \
+ (a)[0] == (b)[0])
+
+static void fixup_botched_add(struct ctlr_info *h,
+ struct hpsa_scsi_dev_t *added)
+{
+ /* called when scsi_add_device fails in order to re-adjust
+ * h->dev[] to match the mid layer's view.
+ */
+ unsigned long flags;
+ int i, j;
+
+ spin_lock_irqsave(&h->lock, flags);
+ for (i = 0; i < h->ndevices; i++) {
+ if (h->dev[i] == added) {
+ for (j = i; j < h->ndevices-1; j++)
+ h->dev[j] = h->dev[j+1];
+ h->ndevices--;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&h->lock, flags);
+ kfree(added);
+}
+
+static inline int device_is_the_same(struct hpsa_scsi_dev_t *dev1,
+ struct hpsa_scsi_dev_t *dev2)
+{
+ if ((is_logical_dev_addr_mode(dev1->scsi3addr) ||
+ (dev1->lun != -1 && dev2->lun != -1)) &&
+ dev1->devtype != 0x0C)
+ return (memcmp(dev1, dev2, sizeof(*dev1)) == 0);
+
+ /* we compare everything except lun and target as these
+ * are not yet assigned. Compare parts likely
+ * to differ first
+ */
+ if (memcmp(dev1->scsi3addr, dev2->scsi3addr,
+ sizeof(dev1->scsi3addr)) != 0)
+ return 0;
+ if (memcmp(dev1->device_id, dev2->device_id,
+ sizeof(dev1->device_id)) != 0)
+ return 0;
+ if (memcmp(dev1->model, dev2->model, sizeof(dev1->model)) != 0)
+ return 0;
+ if (memcmp(dev1->vendor, dev2->vendor, sizeof(dev1->vendor)) != 0)
+ return 0;
+ if (memcmp(dev1->revision, dev2->revision, sizeof(dev1->revision)) != 0)
+ return 0;
+ if (dev1->devtype != dev2->devtype)
+ return 0;
+ if (dev1->raid_level != dev2->raid_level)
+ return 0;
+ if (dev1->bus != dev2->bus)
+ return 0;
+ return 1;
+}
+
+/* Find needle in haystack. If exact match found, return DEVICE_SAME,
+ * and return needle location in *index. If scsi3addr matches, but not
+ * vendor, model, serial num, etc. return DEVICE_CHANGED, and return needle
+ * location in *index. If needle not found, return DEVICE_NOT_FOUND.
+ */
+static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t *needle,
+ struct hpsa_scsi_dev_t *haystack[], int haystack_size,
+ int *index)
+{
+ int i;
+#define DEVICE_NOT_FOUND 0
+#define DEVICE_CHANGED 1
+#define DEVICE_SAME 2
+ for (i = 0; i < haystack_size; i++) {
+ if (SCSI3ADDR_EQ(needle->scsi3addr, haystack[i]->scsi3addr)) {
+ *index = i;
+ if (device_is_the_same(needle, haystack[i]))
+ return DEVICE_SAME;
+ else
+ return DEVICE_CHANGED;
+ }
+ }
+ *index = -1;
+ return DEVICE_NOT_FOUND;
+}
+
+static int adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
+ struct hpsa_scsi_dev_t *sd[], int nsds)
+{
+ /* sd contains scsi3 addresses and devtypes, and inquiry
+ * data. This function takes what's in sd to be the current
+ * reality and updates h->dev[] to reflect that reality.
+ */
+ int i, entry, device_change, changes = 0;
+ struct hpsa_scsi_dev_t *csd;
+ unsigned long flags;
+ struct hpsa_scsi_dev_t **added, **removed;
+ int nadded, nremoved;
+ struct Scsi_Host *sh = NULL;
+
+ added = kzalloc(sizeof(*added) * HPSA_MAX_SCSI_DEVS_PER_HBA,
+ GFP_KERNEL);
+ removed = kzalloc(sizeof(*removed) * HPSA_MAX_SCSI_DEVS_PER_HBA,
+ GFP_KERNEL);
+
+ if (!added || !removed) {
+ dev_warn(&h->pdev->dev, "out of memory in "
+ "adjust_hpsa_scsi_table\n");
+ goto free_and_out;
+ }
+
+ spin_lock_irqsave(&h->devlock, flags);
+
+ /* find any devices in h->dev[] that are not in
+ * sd[] and remove them from h->dev[], and for any
+ * devices which have changed, remove the old device
+ * info and add the new device info.
+ */
+ i = 0;
+ nremoved = 0;
+ nadded = 0;
+ while (i < h->ndevices) {
+ csd = h->dev[i];
+ device_change = hpsa_scsi_find_entry(csd, sd, nsds, &entry);
+ if (device_change == DEVICE_NOT_FOUND) {
+ changes++;
+ hpsa_scsi_remove_entry(h, hostno, i,
+ removed, &nremoved);
+ continue; /* remove ^^^, hence i not incremented */
+ } else if (device_change == DEVICE_CHANGED) {
+ changes++;
+ hpsa_scsi_remove_entry(h, hostno, i,
+ removed, &nremoved);
+ (void) hpsa_scsi_add_entry(h, hostno, sd[entry],
+ added, &nadded);
+ /* add can't fail, we just removed one. */
+ sd[entry] = NULL; /* prevent it from being freed */
+ }
+ i++;
+ }
+
+ /* Now, make sure every device listed in sd[] is also
+ * listed in h->dev[], adding them if they aren't found
+ */
+
+ for (i = 0; i < nsds; i++) {
+ if (!sd[i]) /* if already added above. */
+ continue;
+ device_change = hpsa_scsi_find_entry(sd[i], h->dev,
+ h->ndevices, &entry);
+ if (device_change == DEVICE_NOT_FOUND) {
+ changes++;
+ if (hpsa_scsi_add_entry(h, hostno, sd[i],
+ added, &nadded) != 0)
+ break;
+ sd[i] = NULL; /* prevent from being freed later. */
+ } else if (device_change == DEVICE_CHANGED) {
+ /* should never happen... */
+ changes++;
+ dev_warn(&h->pdev->dev,
+ "device unexpectedly changed.\n");
+ /* but if it does happen, we just ignore that device */
+ }
+ }
+ spin_unlock_irqrestore(&h->devlock, flags);
+
+ /* Don't notify scsi mid layer of any changes the first time through
+ * (or if there are no changes) scsi_scan_host will do it later the
+ * first time through.
+ */
+ if (hostno == -1 || !changes)
+ goto free_and_out;
+
+ sh = h->scsi_host;
+ /* Notify scsi mid layer of any removed devices */
+ for (i = 0; i < nremoved; i++) {
+ struct scsi_device *sdev =
+ scsi_device_lookup(sh, removed[i]->bus,
+ removed[i]->target, removed[i]->lun);
+ if (sdev != NULL) {
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ } else {
+ /* We don't expect to get here.
+ * future cmds to this device will get selection
+ * timeout as if the device was gone.
+ */
+ dev_warn(&h->pdev->dev, "didn't find c%db%dt%dl%d "
+ " for removal.", hostno, removed[i]->bus,
+ removed[i]->target, removed[i]->lun);
+ }
+ kfree(removed[i]);
+ removed[i] = NULL;
+ }
+
+ /* Notify scsi mid layer of any added devices */
+ for (i = 0; i < nadded; i++) {
+ if (scsi_add_device(sh, added[i]->bus,
+ added[i]->target, added[i]->lun) == 0)
+ continue;
+ dev_warn(&h->pdev->dev, "scsi_add_device c%db%dt%dl%d failed, "
+ "device not added.\n", hostno, added[i]->bus,
+ added[i]->target, added[i]->lun);
+ /* now we have to remove it from h->dev,
+ * since it didn't get added to scsi mid layer
+ */
+ fixup_botched_add(h, added[i]);
+ }
+
+free_and_out:
+ kfree(added);
+ kfree(removed);
+ return 0;
+}
+
+/*
+ * Lookup bus/target/lun and retrun corresponding struct hpsa_scsi_dev_t *
+ * Assume's h->devlock is held.
+ */
+static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h,
+ int bus, int target, int lun)
+{
+ int i;
+ struct hpsa_scsi_dev_t *sd;
+
+ for (i = 0; i < h->ndevices; i++) {
+ sd = h->dev[i];
+ if (sd->bus == bus && sd->target == target && sd->lun == lun)
+ return sd;
+ }
+ return NULL;
+}
+
+/* link sdev->hostdata to our per-device structure. */
+static int hpsa_slave_alloc(struct scsi_device *sdev)
+{
+ struct hpsa_scsi_dev_t *sd;
+ unsigned long flags;
+ struct ctlr_info *h;
+
+ h = sdev_to_hba(sdev);
+ spin_lock_irqsave(&h->devlock, flags);
+ sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev),
+ sdev_id(sdev), sdev->lun);
+ if (sd != NULL)
+ sdev->hostdata = sd;
+ spin_unlock_irqrestore(&h->devlock, flags);
+ return 0;
+}
+
+static void hpsa_slave_destroy(struct scsi_device *sdev)
+{
+ return; /* nothing to do. */
+}
+
+static void hpsa_scsi_setup(struct ctlr_info *h)
+{
+ h->ndevices = 0;
+ h->scsi_host = NULL;
+ spin_lock_init(&h->devlock);
+ return;
+}
+
+static void complete_scsi_command(struct CommandList *cp,
+ int timeout, __u32 tag)
+{
+ struct scsi_cmnd *cmd;
+ struct ctlr_info *h;
+ struct ErrorInfo *ei;
+
+ unsigned char sense_key;
+ unsigned char asc; /* additional sense code */
+ unsigned char ascq; /* additional sense code qualifier */
+
+ ei = cp->err_info;
+ cmd = (struct scsi_cmnd *) cp->scsi_cmd;
+ h = cp->h;
+
+ scsi_dma_unmap(cmd); /* undo the DMA mappings */
+
+ cmd->result = (DID_OK << 16); /* host byte */
+ cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */
+ cmd->result |= (ei->ScsiStatus << 1);
+
+ /* copy the sense data whether we need to or not. */
+ memcpy(cmd->sense_buffer, ei->SenseInfo,
+ ei->SenseLen > SCSI_SENSE_BUFFERSIZE ?
+ SCSI_SENSE_BUFFERSIZE :
+ ei->SenseLen);
+ scsi_set_resid(cmd, ei->ResidualCnt);
+
+ if (ei->CommandStatus == 0) {
+ cmd->scsi_done(cmd);
+ cmd_free(h, cp);
+ return;
+ }
+
+ /* an error has occurred */
+ switch (ei->CommandStatus) {
+
+ case CMD_TARGET_STATUS:
+ if (ei->ScsiStatus) {
+ /* Get sense key */
+ sense_key = 0xf & ei->SenseInfo[2];
+ /* Get additional sense code */
+ asc = ei->SenseInfo[12];
+ /* Get addition sense code qualifier */
+ ascq = ei->SenseInfo[13];
+ }
+
+ if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION) {
+ if (check_for_unit_attention(h, cp)) {
+ cmd->result = DID_SOFT_ERROR << 16;
+ break;
+ }
+ if (sense_key == ILLEGAL_REQUEST) {
+ /*
+ * SCSI REPORT_LUNS is commonly unsupported on
+ * Smart Array. Suppress noisy complaint.
+ */
+ if (cp->Request.CDB[0] == REPORT_LUNS)
+ break;
+
+ /* If ASC/ASCQ indicate Logical Unit
+ * Not Supported condition,
+ */
+ if ((asc == 0x25) && (ascq == 0x0)) {
+ dev_warn(&h->pdev->dev, "cp %p "
+ "has check condition\n", cp);
+ break;
+ }
+ }
+
+ if (sense_key == NOT_READY) {
+ /* If Sense is Not Ready, Logical Unit
+ * Not ready, Manual Intervention
+ * required
+ */
+ if ((asc == 0x04) && (ascq == 0x03)) {
+ cmd->result = DID_NO_CONNECT << 16;
+ dev_warn(&h->pdev->dev, "cp %p "
+ "has check condition: unit "
+ "not ready, manual "
+ "intervention required\n", cp);
+ break;
+ }
+ }
+
+
+ /* Must be some other type of check condition */
+ dev_warn(&h->pdev->dev, "cp %p has check condition: "
+ "unknown type: "
+ "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, "
+ "Returning result: 0x%x, "
+ "cmd=[%02x %02x %02x %02x %02x "
+ "%02x %02x %02x %02x %02x]\n",
+ cp, sense_key, asc, ascq,
+ cmd->result,
+ cmd->cmnd[0], cmd->cmnd[1],
+ cmd->cmnd[2], cmd->cmnd[3],
+ cmd->cmnd[4], cmd->cmnd[5],
+ cmd->cmnd[6], cmd->cmnd[7],
+ cmd->cmnd[8], cmd->cmnd[9]);
+ break;
+ }
+
+
+ /* Problem was not a check condition
+ * Pass it up to the upper layers...
+ */
+ if (ei->ScsiStatus) {
+ dev_warn(&h->pdev->dev, "cp %p has status 0x%x "
+ "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, "
+ "Returning result: 0x%x\n",
+ cp, ei->ScsiStatus,
+ sense_key, asc, ascq,
+ cmd->result);
+ } else { /* scsi status is zero??? How??? */
+ dev_warn(&h->pdev->dev, "cp %p SCSI status was 0. "
+ "Returning no connection.\n", cp),
+
+ /* Ordinarily, this case should never happen,
+ * but there is a bug in some released firmware
+ * revisions that allows it to happen if, for
+ * example, a 4100 backplane loses power and
+ * the tape drive is in it. We assume that
+ * it's a fatal error of some kind because we
+ * can't show that it wasn't. We will make it
+ * look like selection timeout since that is
+ * the most common reason for this to occur,
+ * and it's severe enough.
+ */
+
+ cmd->result = DID_NO_CONNECT << 16;
+ }
+ break;
+
+ case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
+ break;
+ case CMD_DATA_OVERRUN:
+ dev_warn(&h->pdev->dev, "cp %p has"
+ " completed with data overrun "
+ "reported\n", cp);
+ break;
+ case CMD_INVALID: {
+ /* print_bytes(cp, sizeof(*cp), 1, 0);
+ print_cmd(cp); */
+ /* We get CMD_INVALID if you address a non-existent device
+ * instead of a selection timeout (no response). You will
+ * see this if you yank out a drive, then try to access it.
+ * This is kind of a shame because it means that any other
+ * CMD_INVALID (e.g. driver bug) will get interpreted as a
+ * missing target. */
+ cmd->result = DID_NO_CONNECT << 16;
+ }
+ break;
+ case CMD_PROTOCOL_ERR:
+ dev_warn(&h->pdev->dev, "cp %p has "
+ "protocol error \n", cp);
+ break;
+ case CMD_HARDWARE_ERR:
+ cmd->result = DID_ERROR << 16;
+ dev_warn(&h->pdev->dev, "cp %p had hardware error\n", cp);
+ break;
+ case CMD_CONNECTION_LOST:
+ cmd->result = DID_ERROR << 16;
+ dev_warn(&h->pdev->dev, "cp %p had connection lost\n", cp);
+ break;
+ case CMD_ABORTED:
+ cmd->result = DID_ABORT << 16;
+ dev_warn(&h->pdev->dev, "cp %p was aborted with status 0x%x\n",
+ cp, ei->ScsiStatus);
+ break;
+ case CMD_ABORT_FAILED:
+ cmd->result = DID_ERROR << 16;
+ dev_warn(&h->pdev->dev, "cp %p reports abort failed\n", cp);
+ break;
+ case CMD_UNSOLICITED_ABORT:
+ cmd->result = DID_ABORT << 16;
+ dev_warn(&h->pdev->dev, "cp %p aborted do to an unsolicited "
+ "abort\n", cp);
+ break;
+ case CMD_TIMEOUT:
+ cmd->result = DID_TIME_OUT << 16;
+ dev_warn(&h->pdev->dev, "cp %p timedout\n", cp);
+ break;
+ default:
+ cmd->result = DID_ERROR << 16;
+ dev_warn(&h->pdev->dev, "cp %p returned unknown status %x\n",
+ cp, ei->CommandStatus);
+ }
+ cmd->scsi_done(cmd);
+ cmd_free(h, cp);
+}
+
+static int hpsa_scsi_detect(struct ctlr_info *h)
+{
+ struct Scsi_Host *sh;
+ int error;
+
+ sh = scsi_host_alloc(&hpsa_driver_template, sizeof(h));
+ if (sh == NULL)
+ goto fail;
+
+ sh->io_port = 0;
+ sh->n_io_port = 0;
+ sh->this_id = -1;
+ sh->max_channel = 3;
+ sh->max_cmd_len = MAX_COMMAND_SIZE;
+ sh->max_lun = HPSA_MAX_LUN;
+ sh->max_id = HPSA_MAX_LUN;
+ h->scsi_host = sh;
+ sh->hostdata[0] = (unsigned long) h;
+ sh->irq = h->intr[SIMPLE_MODE_INT];
+ sh->unique_id = sh->irq;
+ error = scsi_add_host(sh, &h->pdev->dev);
+ if (error)
+ goto fail_host_put;
+ scsi_scan_host(sh);
+ return 0;
+
+ fail_host_put:
+ dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_add_host"
+ " failed for controller %d\n", h->ctlr);
+ scsi_host_put(sh);
+ return -1;
+ fail:
+ dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_host_alloc"
+ " failed for controller %d\n", h->ctlr);
+ return -1;
+}
+
+static void hpsa_pci_unmap(struct pci_dev *pdev,
+ struct CommandList *c, int sg_used, int data_direction)
+{
+ int i;
+ union u64bit addr64;
+
+ for (i = 0; i < sg_used; i++) {
+ addr64.val32.lower = c->SG[i].Addr.lower;
+ addr64.val32.upper = c->SG[i].Addr.upper;
+ pci_unmap_single(pdev, (dma_addr_t) addr64.val, c->SG[i].Len,
+ data_direction);
+ }
+}
+
+static void hpsa_map_one(struct pci_dev *pdev,
+ struct CommandList *cp,
+ unsigned char *buf,
+ size_t buflen,
+ int data_direction)
+{
+ __u64 addr64;
+
+ if (buflen == 0 || data_direction == PCI_DMA_NONE) {
+ cp->Header.SGList = 0;
+ cp->Header.SGTotal = 0;
+ return;
+ }
+
+ addr64 = (__u64) pci_map_single(pdev, buf, buflen, data_direction);
+ cp->SG[0].Addr.lower =
+ (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
+ cp->SG[0].Addr.upper =
+ (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF);
+ cp->SG[0].Len = buflen;
+ cp->Header.SGList = (__u8) 1; /* no. SGs contig in this cmd */
+ cp->Header.SGTotal = (__u16) 1; /* total sgs in this cmd list */
+}
+
+static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h,
+ struct CommandList *c)
+{
+ DECLARE_COMPLETION_ONSTACK(wait);
+
+ c->waiting = &wait;
+ enqueue_cmd_and_start_io(h, c);
+ wait_for_completion(&wait);
+}
+
+static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h,
+ struct CommandList *c, int data_direction)
+{
+ int retry_count = 0;
+
+ do {
+ memset(c->err_info, 0, sizeof(c->err_info));
+ hpsa_scsi_do_simple_cmd_core(h, c);
+ retry_count++;
+ } while (check_for_unit_attention(h, c) && retry_count <= 3);
+ hpsa_pci_unmap(h->pdev, c, 1, data_direction);
+}
+
+static void hpsa_scsi_interpret_error(struct CommandList *cp)
+{
+ struct ErrorInfo *ei;
+ struct device *d = &cp->h->pdev->dev;
+
+ ei = cp->err_info;
+ switch (ei->CommandStatus) {
+ case CMD_TARGET_STATUS:
+ dev_warn(d, "cmd %p has completed with errors\n", cp);
+ dev_warn(d, "cmd %p has SCSI Status = %x\n", cp,
+ ei->ScsiStatus);
+ if (ei->ScsiStatus == 0)
+ dev_warn(d, "SCSI status is abnormally zero. "
+ "(probably indicates selection timeout "
+ "reported incorrectly due to a known "
+ "firmware bug, circa July, 2001.)\n");
+ break;
+ case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
+ dev_info(d, "UNDERRUN\n");
+ break;
+ case CMD_DATA_OVERRUN:
+ dev_warn(d, "cp %p has completed with data overrun\n", cp);
+ break;
+ case CMD_INVALID: {
+ /* controller unfortunately reports SCSI passthru's
+ * to non-existent targets as invalid commands.
+ */
+ dev_warn(d, "cp %p is reported invalid (probably means "
+ "target device no longer present)\n", cp);
+ /* print_bytes((unsigned char *) cp, sizeof(*cp), 1, 0);
+ print_cmd(cp); */
+ }
+ break;
+ case CMD_PROTOCOL_ERR:
+ dev_warn(d, "cp %p has protocol error \n", cp);
+ break;
+ case CMD_HARDWARE_ERR:
+ /* cmd->result = DID_ERROR << 16; */
+ dev_warn(d, "cp %p had hardware error\n", cp);
+ break;
+ case CMD_CONNECTION_LOST:
+ dev_warn(d, "cp %p had connection lost\n", cp);
+ break;
+ case CMD_ABORTED:
+ dev_warn(d, "cp %p was aborted\n", cp);
+ break;
+ case CMD_ABORT_FAILED:
+ dev_warn(d, "cp %p reports abort failed\n", cp);
+ break;
+ case CMD_UNSOLICITED_ABORT:
+ dev_warn(d, "cp %p aborted due to an unsolicited abort\n", cp);
+ break;
+ case CMD_TIMEOUT:
+ dev_warn(d, "cp %p timed out\n", cp);
+ break;
+ default:
+ dev_warn(d, "cp %p returned unknown status %x\n", cp,
+ ei->CommandStatus);
+ }
+}
+
+static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr,
+ unsigned char page, unsigned char *buf,
+ unsigned char bufsize)
+{
+ int rc = IO_OK;
+ struct CommandList *c;
+ struct ErrorInfo *ei;
+
+ c = cmd_special_alloc(h);
+
+ if (c == NULL) { /* trouble... */
+ dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+ return -1;
+ }
+
+ fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize, page, scsi3addr, TYPE_CMD);
+ hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
+ ei = c->err_info;
+ if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
+ hpsa_scsi_interpret_error(c);
+ rc = -1;
+ }
+ cmd_special_free(h, c);
+ return rc;
+}
+
+static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr)
+{
+ int rc = IO_OK;
+ struct CommandList *c;
+ struct ErrorInfo *ei;
+
+ c = cmd_special_alloc(h);
+
+ if (c == NULL) { /* trouble... */
+ dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+ return -1;
+ }
+
+ fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, scsi3addr, TYPE_MSG);
+ hpsa_scsi_do_simple_cmd_core(h, c);
+ /* no unmap needed here because no data xfer. */
+
+ ei = c->err_info;
+ if (ei->CommandStatus != 0) {
+ hpsa_scsi_interpret_error(c);
+ rc = -1;
+ }
+ cmd_special_free(h, c);
+ return rc;
+}
+
+static void hpsa_get_raid_level(struct ctlr_info *h,
+ unsigned char *scsi3addr, unsigned char *raid_level)
+{
+ int rc;
+ unsigned char *buf;
+
+ *raid_level = RAID_UNKNOWN;
+ buf = kzalloc(64, GFP_KERNEL);
+ if (!buf)
+ return;
+ rc = hpsa_scsi_do_inquiry(h, scsi3addr, 0xC1, buf, 64);
+ if (rc == 0)
+ *raid_level = buf[8];
+ if (*raid_level > RAID_UNKNOWN)
+ *raid_level = RAID_UNKNOWN;
+ kfree(buf);
+ return;
+}
+
+/* Get the device id from inquiry page 0x83 */
+static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr,
+ unsigned char *device_id, int buflen)
+{
+ int rc;
+ unsigned char *buf;
+
+ if (buflen > 16)
+ buflen = 16;
+ buf = kzalloc(64, GFP_KERNEL);
+ if (!buf)
+ return -1;
+ rc = hpsa_scsi_do_inquiry(h, scsi3addr, 0x83, buf, 64);
+ if (rc == 0)
+ memcpy(device_id, &buf[8], buflen);
+ kfree(buf);
+ return rc != 0;
+}
+
+static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical,
+ struct ReportLUNdata *buf, int bufsize,
+ int extended_response)
+{
+ int rc = IO_OK;
+ struct CommandList *c;
+ unsigned char scsi3addr[8];
+ struct ErrorInfo *ei;
+
+ c = cmd_special_alloc(h);
+ if (c == NULL) { /* trouble... */
+ dev_err(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+ return -1;
+ }
+
+ memset(&scsi3addr[0], 0, 8); /* address the controller */
+
+ fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h,
+ buf, bufsize, 0, scsi3addr, TYPE_CMD);
+ if (extended_response)
+ c->Request.CDB[1] = extended_response;
+ hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
+ ei = c->err_info;
+ if (ei->CommandStatus != 0 &&
+ ei->CommandStatus != CMD_DATA_UNDERRUN) {
+ hpsa_scsi_interpret_error(c);
+ rc = -1;
+ }
+ cmd_special_free(h, c);
+ return rc;
+}
+
+static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h,
+ struct ReportLUNdata *buf,
+ int bufsize, int extended_response)
+{
+ return hpsa_scsi_do_report_luns(h, 0, buf, bufsize, extended_response);
+}
+
+static inline int hpsa_scsi_do_report_log_luns(struct ctlr_info *h,
+ struct ReportLUNdata *buf, int bufsize)
+{
+ return hpsa_scsi_do_report_luns(h, 1, buf, bufsize, 0);
+}
+
+static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device,
+ int bus, int target, int lun)
+{
+ device->bus = bus;
+ device->target = target;
+ device->lun = lun;
+}
+
+static int hpsa_update_device_info(struct ctlr_info *h,
+ unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device)
+{
+#define OBDR_TAPE_INQ_SIZE 49
+ unsigned char *inq_buff = NULL;
+
+ inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
+ if (!inq_buff)
+ goto bail_out;
+
+ memset(inq_buff, 0, OBDR_TAPE_INQ_SIZE);
+ /* Do an inquiry to the device to see what it is. */
+ if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
+ (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) {
+ /* Inquiry failed (msg printed already) */
+ dev_err(&h->pdev->dev,
+ "hpsa_update_device_info: inquiry failed\n");
+ goto bail_out;
+ }
+
+ /* As a side effect, record the firmware version number
+ * if we happen to be talking to the RAID controller.
+ */
+ if (is_hba_lunid(scsi3addr))
+ memcpy(h->firm_ver, &inq_buff[32], 4);
+
+ this_device->devtype = (inq_buff[0] & 0x1f);
+ memcpy(this_device->scsi3addr, scsi3addr, 8);
+ memcpy(this_device->vendor, &inq_buff[8],
+ sizeof(this_device->vendor));
+ memcpy(this_device->model, &inq_buff[16],
+ sizeof(this_device->model));
+ memcpy(this_device->revision, &inq_buff[32],
+ sizeof(this_device->revision));
+ memset(this_device->device_id, 0,
+ sizeof(this_device->device_id));
+ hpsa_get_device_id(h, scsi3addr, this_device->device_id,
+ sizeof(this_device->device_id));
+
+ if (this_device->devtype == TYPE_DISK &&
+ is_logical_dev_addr_mode(scsi3addr))
+ hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level);
+ else
+ this_device->raid_level = RAID_UNKNOWN;
+
+ kfree(inq_buff);
+ return 0;
+
+bail_out:
+ kfree(inq_buff);
+ return 1;
+}
+
+static unsigned char *msa2xxx_model[] = {
+ "MSA2012",
+ "MSA2024",
+ "MSA2312",
+ "MSA2324",
+ NULL,
+};
+
+static int is_msa2xxx(struct ctlr_info *h, struct hpsa_scsi_dev_t *device)
+{
+ int i;
+
+ for (i = 0; msa2xxx_model[i]; i++)
+ if (strncmp(device->model, msa2xxx_model[i],
+ strlen(msa2xxx_model[i])) == 0)
+ return 1;
+ return 0;
+}
+
+/* Helper function to assign bus, target, lun mapping of devices.
+ * Puts non-msa2xxx logical volumes on bus 0, msa2xxx logical
+ * volumes on bus 1, physical devices on bus 2. and the hba on bus 3.
+ * Logical drive target and lun are assigned at this time, but
+ * physical device lun and target assignment are deferred (assigned
+ * in hpsa_find_target_lun, called by hpsa_scsi_add_entry.)
+ */
+static void figure_bus_target_lun(struct ctlr_info *h,
+ __u8 *lunaddrbytes, int *bus, int *target, int *lun,
+ struct hpsa_scsi_dev_t *device)
+{
+
+ __u32 lunid;
+
+ if (is_logical_dev_addr_mode(lunaddrbytes)) {
+ /* logical device */
+ memcpy(&lunid, lunaddrbytes, sizeof(lunid));
+ lunid = le32_to_cpu(lunid);
+
+ if (is_msa2xxx(h, device)) {
+ *bus = 1;
+ *target = (lunid >> 16) & 0x3fff;
+ *lun = lunid & 0x00ff;
+ } else {
+ *bus = 0;
+ *lun = 0;
+ *target = lunid & 0x3fff;
+ }
+ } else {
+ /* physical device */
+ if (is_hba_lunid(lunaddrbytes))
+ *bus = 3;
+ else
+ *bus = 2;
+ *target = -1;
+ *lun = -1; /* we will fill these in later. */
+ }
+}
+
+/*
+ * If there is no lun 0 on a target, linux won't find any devices.
+ * For the MSA2xxx boxes, we have to manually detect the enclosure
+ * which is at lun zero, as CCISS_REPORT_PHYSICAL_LUNS doesn't report
+ * it for some reason. *tmpdevice is the target we're adding,
+ * this_device is a pointer into the current element of currentsd[]
+ * that we're building up in update_scsi_devices(), below.
+ * lunzerobits is a bitmap that tracks which targets already have a
+ * lun 0 assigned.
+ * Returns 1 if an enclosure was added, 0 if not.
+ */
+static int add_msa2xxx_enclosure_device(struct ctlr_info *h,
+ struct hpsa_scsi_dev_t *tmpdevice,
+ struct hpsa_scsi_dev_t *this_device, __u8 *lunaddrbytes,
+ int bus, int target, int lun, unsigned long lunzerobits[],
+ int *nmsa2xxx_enclosures)
+{
+ unsigned char scsi3addr[8];
+
+ if (test_bit(target, lunzerobits))
+ return 0; /* There is already a lun 0 on this target. */
+
+ if (!is_logical_dev_addr_mode(lunaddrbytes))
+ return 0; /* It's the logical targets that may lack lun 0. */
+
+ if (!is_msa2xxx(h, tmpdevice))
+ return 0; /* It's only the MSA2xxx that have this problem. */
+
+ if (lun == 0) /* if lun is 0, then obviously we have a lun 0. */
+ return 0;
+
+ if (is_hba_lunid(scsi3addr))
+ return 0; /* Don't add the RAID controller here. */
+
+#define MAX_MSA2XXX_ENCLOSURES 32
+ if (*nmsa2xxx_enclosures >= MAX_MSA2XXX_ENCLOSURES) {
+ dev_warn(&h->pdev->dev, "Maximum number of MSA2XXX "
+ "enclosures exceeded. Check your hardware "
+ "configuration.");
+ return 0;
+ }
+
+ memset(scsi3addr, 0, 8);
+ scsi3addr[3] = target;
+ if (hpsa_update_device_info(h, scsi3addr, this_device))
+ return 0;
+ (*nmsa2xxx_enclosures)++;
+ hpsa_set_bus_target_lun(this_device, bus, target, 0);
+ set_bit(target, lunzerobits);
+ return 1;
+}
+
+/*
+ * Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev,
+ * logdev. The number of luns in physdev and logdev are returned in
+ * *nphysicals and *nlogicals, respectively.
+ * Returns 0 on success, -1 otherwise.
+ */
+static int hpsa_gather_lun_info(struct ctlr_info *h,
+ int reportlunsize,
+ struct ReportLUNdata *physdev, __u32 *nphysicals,
+ struct ReportLUNdata *logdev, __u32 *nlogicals)
+{
+ if (hpsa_scsi_do_report_phys_luns(h, physdev, reportlunsize, 0)) {
+ dev_err(&h->pdev->dev, "report physical LUNs failed.\n");
+ return -1;
+ }
+ memcpy(nphysicals, &physdev->LUNListLength[0], sizeof(*nphysicals));
+ *nphysicals = be32_to_cpu(*nphysicals) / 8;
+#ifdef DEBUG
+ dev_info(&h->pdev->dev, "number of physical luns is %d\n", *nphysicals);
+#endif
+ if (*nphysicals > HPSA_MAX_PHYS_LUN) {
+ dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded."
+ " %d LUNs ignored.\n", HPSA_MAX_PHYS_LUN,
+ *nphysicals - HPSA_MAX_PHYS_LUN);
+ *nphysicals = HPSA_MAX_PHYS_LUN;
+ }
+ if (hpsa_scsi_do_report_log_luns(h, logdev, reportlunsize)) {
+ dev_err(&h->pdev->dev, "report logical LUNs failed.\n");
+ return -1;
+ }
+ memcpy(nlogicals, &logdev->LUNListLength[0], sizeof(*nlogicals));
+ *nlogicals = be32_to_cpu(*nlogicals) / 8;
+#ifdef DEBUG
+ dev_info(&h->pdev->dev, "number of logical luns is %d\n", *nlogicals);
+#endif
+ /* Reject Logicals in excess of our max capability. */
+ if (*nlogicals > HPSA_MAX_LUN) {
+ dev_warn(&h->pdev->dev,
+ "maximum logical LUNs (%d) exceeded. "
+ "%d LUNs ignored.\n", HPSA_MAX_LUN,
+ *nlogicals - HPSA_MAX_LUN);
+ *nlogicals = HPSA_MAX_LUN;
+ }
+ if (*nlogicals + *nphysicals > HPSA_MAX_PHYS_LUN) {
+ dev_warn(&h->pdev->dev,
+ "maximum logical + physical LUNs (%d) exceeded. "
+ "%d LUNs ignored.\n", HPSA_MAX_PHYS_LUN,
+ *nphysicals + *nlogicals - HPSA_MAX_PHYS_LUN);
+ *nlogicals = HPSA_MAX_PHYS_LUN - *nphysicals;
+ }
+ return 0;
+}
+
+static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
+{
+ /* the idea here is we could get notified
+ * that some devices have changed, so we do a report
+ * physical luns and report logical luns cmd, and adjust
+ * our list of devices accordingly.
+ *
+ * The scsi3addr's of devices won't change so long as the
+ * adapter is not reset. That means we can rescan and
+ * tell which devices we already know about, vs. new
+ * devices, vs. disappearing devices.
+ */
+ struct ReportLUNdata *physdev_list = NULL;
+ struct ReportLUNdata *logdev_list = NULL;
+ unsigned char *inq_buff = NULL;
+ __u32 nphysicals = 0;
+ __u32 nlogicals = 0;
+ __u32 ndev_allocated = 0;
+ struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice;
+ int ncurrent = 0;
+ int reportlunsize = sizeof(*physdev_list) + HPSA_MAX_PHYS_LUN * 8;
+ int i, nmsa2xxx_enclosures, ndevs_to_allocate;
+ int bus, target, lun;
+ DECLARE_BITMAP(lunzerobits, HPSA_MAX_TARGETS_PER_CTLR);
+
+ currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_SCSI_DEVS_PER_HBA,
+ GFP_KERNEL);
+ physdev_list = kzalloc(reportlunsize, GFP_KERNEL);
+ logdev_list = kzalloc(reportlunsize, GFP_KERNEL);
+ inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
+ tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
+
+ if (!currentsd || !physdev_list || !logdev_list ||
+ !inq_buff || !tmpdevice) {
+ dev_err(&h->pdev->dev, "out of memory\n");
+ goto out;
+ }
+ memset(lunzerobits, 0, sizeof(lunzerobits));
+
+ if (hpsa_gather_lun_info(h, reportlunsize, physdev_list, &nphysicals,
+ logdev_list, &nlogicals))
+ goto out;
+
+ /* We might see up to 32 MSA2xxx enclosures, actually 8 of them
+ * but each of them 4 times through different paths. The plus 1
+ * is for the RAID controller.
+ */
+ ndevs_to_allocate = nphysicals + nlogicals + MAX_MSA2XXX_ENCLOSURES + 1;
+
+ /* Allocate the per device structures */
+ for (i = 0; i < ndevs_to_allocate; i++) {
+ currentsd[i] = kzalloc(sizeof(*currentsd[i]), GFP_KERNEL);
+ if (!currentsd[i]) {
+ dev_warn(&h->pdev->dev, "out of memory at %s:%d\n",
+ __FILE__, __LINE__);
+ goto out;
+ }
+ ndev_allocated++;
+ }
+
+ /* adjust our table of devices */
+ nmsa2xxx_enclosures = 0;
+ for (i = 0; i < nphysicals + nlogicals + 1; i++) {
+ __u8 *lunaddrbytes;
+
+ /* Figure out where the LUN ID info is coming from */
+ if (i < nphysicals)
+ lunaddrbytes = &physdev_list->LUN[i][0];
+ else
+ if (i < nphysicals + nlogicals)
+ lunaddrbytes =
+ &logdev_list->LUN[i-nphysicals][0];
+ else /* jam in the RAID controller at the end */
+ lunaddrbytes = RAID_CTLR_LUNID;
+
+ /* skip masked physical devices. */
+ if (lunaddrbytes[3] & 0xC0 && i < nphysicals)
+ continue;
+
+ /* Get device type, vendor, model, device id */
+ if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice))
+ continue; /* skip it if we can't talk to it. */
+ figure_bus_target_lun(h, lunaddrbytes, &bus, &target, &lun,
+ tmpdevice);
+ this_device = currentsd[ncurrent];
+
+ /*
+ * For the msa2xxx boxes, we have to insert a LUN 0 which
+ * doesn't show up in CCISS_REPORT_PHYSICAL data, but there
+ * is nonetheless an enclosure device there. We have to
+ * present that otherwise linux won't find anything if
+ * there is no lun 0.
+ */
+ if (add_msa2xxx_enclosure_device(h, tmpdevice, this_device,
+ lunaddrbytes, bus, target, lun, lunzerobits,
+ &nmsa2xxx_enclosures)) {
+ ncurrent++;
+ this_device = currentsd[ncurrent];
+ }
+
+ *this_device = *tmpdevice;
+ hpsa_set_bus_target_lun(this_device, bus, target, lun);
+
+ switch (this_device->devtype) {
+ case TYPE_ROM: {
+ /* We don't *really* support actual CD-ROM devices,
+ * just "One Button Disaster Recovery" tape drive
+ * which temporarily pretends to be a CD-ROM drive.
+ * So we check that the device is really an OBDR tape
+ * device by checking for "$DR-10" in bytes 43-48 of
+ * the inquiry data.
+ */
+ char obdr_sig[7];
+#define OBDR_TAPE_SIG "$DR-10"
+ strncpy(obdr_sig, &inq_buff[43], 6);
+ obdr_sig[6] = '\0';
+ if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0)
+ /* Not OBDR device, ignore it. */
+ break;
+ }
+ ncurrent++;
+ break;
+ case TYPE_DISK:
+ if (i < nphysicals)
+ break;
+ ncurrent++;
+ break;
+ case TYPE_TAPE:
+ case TYPE_MEDIUM_CHANGER:
+ ncurrent++;
+ break;
+ case TYPE_RAID:
+ /* Only present the Smartarray HBA as a RAID controller.
+ * If it's a RAID controller other than the HBA itself
+ * (an external RAID controller, MSA500 or similar)
+ * don't present it.
+ */
+ if (!is_hba_lunid(lunaddrbytes))
+ break;
+ ncurrent++;
+ break;
+ default:
+ break;
+ }
+ if (ncurrent >= HPSA_MAX_SCSI_DEVS_PER_HBA)
+ break;
+ }
+ adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent);
+out:
+ kfree(tmpdevice);
+ for (i = 0; i < ndev_allocated; i++)
+ kfree(currentsd[i]);
+ kfree(currentsd);
+ kfree(inq_buff);
+ kfree(physdev_list);
+ kfree(logdev_list);
+ return;
+}
+
+/* hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci
+ * dma mapping and fills in the scatter gather entries of the
+ * hpsa command, cp.
+ */
+static int hpsa_scatter_gather(struct pci_dev *pdev,
+ struct CommandList *cp,
+ struct scsi_cmnd *cmd)
+{
+ unsigned int len;
+ struct scatterlist *sg;
+ __u64 addr64;
+ int use_sg, i;
+
+ BUG_ON(scsi_sg_count(cmd) > MAXSGENTRIES);
+
+ use_sg = scsi_dma_map(cmd);
+ if (use_sg < 0)
+ return use_sg;
+
+ if (!use_sg)
+ goto sglist_finished;
+
+ scsi_for_each_sg(cmd, sg, use_sg, i) {
+ addr64 = (__u64) sg_dma_address(sg);
+ len = sg_dma_len(sg);
+ cp->SG[i].Addr.lower =
+ (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
+ cp->SG[i].Addr.upper =
+ (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF);
+ cp->SG[i].Len = len;
+ cp->SG[i].Ext = 0; /* we are not chaining */
+ }
+
+sglist_finished:
+
+ cp->Header.SGList = (__u8) use_sg; /* no. SGs contig in this cmd */
+ cp->Header.SGTotal = (__u16) use_sg; /* total sgs in this cmd list */
+ return 0;
+}
+
+
+static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd,
+ void (*done)(struct scsi_cmnd *))
+{
+ struct ctlr_info *h;
+ struct hpsa_scsi_dev_t *dev;
+ unsigned char scsi3addr[8];
+ struct CommandList *c;
+ unsigned long flags;
+
+ /* Get the ptr to our adapter structure out of cmd->host. */
+ h = sdev_to_hba(cmd->device);
+ dev = cmd->device->hostdata;
+ if (!dev) {
+ cmd->result = DID_NO_CONNECT << 16;
+ done(cmd);
+ return 0;
+ }
+ memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr));
+
+ /* Need a lock as this is being allocated from the pool */
+ spin_lock_irqsave(&h->lock, flags);
+ c = cmd_alloc(h);
+ spin_unlock_irqrestore(&h->lock, flags);
+ if (c == NULL) { /* trouble... */
+ dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n");
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+
+ /* Fill in the command list header */
+
+ cmd->scsi_done = done; /* save this for use by completion code */
+
+ /* save c in case we have to abort it */
+ cmd->host_scribble = (unsigned char *) c;
+
+ c->cmd_type = CMD_SCSI;
+ c->scsi_cmd = cmd;
+ c->Header.ReplyQueue = 0; /* unused in simple mode */
+ memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
+ c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */
+
+ /* Fill in the request block... */
+
+ c->Request.Timeout = 0;
+ memset(c->Request.CDB, 0, sizeof(c->Request.CDB));
+ BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB));
+ c->Request.CDBLen = cmd->cmd_len;
+ memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len);
+ c->Request.Type.Type = TYPE_CMD;
+ c->Request.Type.Attribute = ATTR_SIMPLE;
+ switch (cmd->sc_data_direction) {
+ case DMA_TO_DEVICE:
+ c->Request.Type.Direction = XFER_WRITE;
+ break;
+ case DMA_FROM_DEVICE:
+ c->Request.Type.Direction = XFER_READ;
+ break;
+ case DMA_NONE:
+ c->Request.Type.Direction = XFER_NONE;
+ break;
+ case DMA_BIDIRECTIONAL:
+ /* This can happen if a buggy application does a scsi passthru
+ * and sets both inlen and outlen to non-zero. ( see
+ * ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() )
+ */
+
+ c->Request.Type.Direction = XFER_RSVD;
+ /* This is technically wrong, and hpsa controllers should
+ * reject it with CMD_INVALID, which is the most correct
+ * response, but non-fibre backends appear to let it
+ * slide by, and give the same results as if this field
+ * were set correctly. Either way is acceptable for
+ * our purposes here.
+ */
+
+ break;
+
+ default:
+ dev_err(&h->pdev->dev, "unknown data direction: %d\n",
+ cmd->sc_data_direction);
+ BUG();
+ break;
+ }
+
+ if (hpsa_scatter_gather(h->pdev, c, cmd) < 0) { /* Fill SG list */
+ cmd_free(h, c);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+ enqueue_cmd_and_start_io(h, c);
+ /* the cmd'll come back via intr handler in complete_scsi_command() */
+ return 0;
+}
+
+static void hpsa_unregister_scsi(struct ctlr_info *h)
+{
+ /* we are being forcibly unloaded, and may not refuse. */
+ scsi_remove_host(h->scsi_host);
+ scsi_host_put(h->scsi_host);
+ h->scsi_host = NULL;
+}
+
+static int hpsa_register_scsi(struct ctlr_info *h)
+{
+ int rc;
+
+ hpsa_update_scsi_devices(h, -1);
+ rc = hpsa_scsi_detect(h);
+ if (rc != 0)
+ dev_err(&h->pdev->dev, "hpsa_register_scsi: failed"
+ " hpsa_scsi_detect(), rc is %d\n", rc);
+ return rc;
+}
+
+static int wait_for_device_to_become_ready(struct ctlr_info *h,
+ unsigned char lunaddr[])
+{
+ int rc = 0;
+ int count = 0;
+ int waittime = 1; /* seconds */
+ struct CommandList *c;
+
+ c = cmd_special_alloc(h);
+ if (!c) {
+ dev_warn(&h->pdev->dev, "out of memory in "
+ "wait_for_device_to_become_ready.\n");
+ return IO_ERROR;
+ }
+
+ /* Send test unit ready until device ready, or give up. */
+ while (count < HPSA_TUR_RETRY_LIMIT) {
+
+ /* Wait for a bit. do this first, because if we send
+ * the TUR right away, the reset will just abort it.
+ */
+ msleep(1000 * waittime);
+ count++;
+
+ /* Increase wait time with each try, up to a point. */
+ if (waittime < HPSA_MAX_WAIT_INTERVAL_SECS)
+ waittime = waittime * 2;
+
+ /* Send the Test Unit Ready */
+ fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, lunaddr, TYPE_CMD);
+ hpsa_scsi_do_simple_cmd_core(h, c);
+ /* no unmap needed here because no data xfer. */
+
+ if (c->err_info->CommandStatus == CMD_SUCCESS)
+ break;
+
+ if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
+ c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION &&
+ (c->err_info->SenseInfo[2] == NO_SENSE ||
+ c->err_info->SenseInfo[2] == UNIT_ATTENTION))
+ break;
+
+ dev_warn(&h->pdev->dev, "waiting %d secs "
+ "for device to become ready.\n", waittime);
+ rc = 1; /* device not ready. */
+ }
+
+ if (rc)
+ dev_warn(&h->pdev->dev, "giving up on device.\n");
+ else
+ dev_warn(&h->pdev->dev, "device is ready.\n");
+
+ cmd_special_free(h, c);
+ return rc;
+}
+
+/* Need at least one of these error handlers to keep ../scsi/hosts.c from
+ * complaining. Doing a host- or bus-reset can't do anything good here.
+ */
+static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
+{
+ int rc;
+ struct ctlr_info *h;
+ struct hpsa_scsi_dev_t *dev;
+
+ /* find the controller to which the command to be aborted was sent */
+ h = sdev_to_hba(scsicmd->device);
+ if (h == NULL) /* paranoia */
+ return FAILED;
+ dev_warn(&h->pdev->dev, "resetting drive\n");
+
+ dev = scsicmd->device->hostdata;
+ if (!dev) {
+ dev_err(&h->pdev->dev, "hpsa_eh_device_reset_handler: "
+ "device lookup failed.\n");
+ return FAILED;
+ }
+ /* send a reset to the SCSI LUN which the command was sent to */
+ rc = hpsa_send_reset(h, dev->scsi3addr);
+ if (rc == 0 && wait_for_device_to_become_ready(h, dev->scsi3addr) == 0)
+ return SUCCESS;
+
+ dev_warn(&h->pdev->dev, "resetting device failed.\n");
+ return FAILED;
+}
+
+/*
+ * For operations that cannot sleep, a command block is allocated at init,
+ * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
+ * which ones are free or in use. Lock must be held when calling this.
+ * cmd_free() is the complement.
+ */
+static struct CommandList *cmd_alloc(struct ctlr_info *h)
+{
+ struct CommandList *c;
+ int i;
+ union u64bit temp64;
+ dma_addr_t cmd_dma_handle, err_dma_handle;
+
+ do {
+ i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds);
+ if (i == h->nr_cmds)
+ return NULL;
+ } while (test_and_set_bit
+ (i & (BITS_PER_LONG - 1),
+ h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0);
+ c = h->cmd_pool + i;
+ memset(c, 0, sizeof(*c));
+ cmd_dma_handle = h->cmd_pool_dhandle
+ + i * sizeof(*c);
+ c->err_info = h->errinfo_pool + i;
+ memset(c->err_info, 0, sizeof(*c->err_info));
+ err_dma_handle = h->errinfo_pool_dhandle
+ + i * sizeof(*c->err_info);
+ h->nr_allocs++;
+
+ c->cmdindex = i;
+
+ INIT_HLIST_NODE(&c->list);
+ c->busaddr = (__u32) cmd_dma_handle;
+ temp64.val = (__u64) err_dma_handle;
+ c->ErrDesc.Addr.lower = temp64.val32.lower;
+ c->ErrDesc.Addr.upper = temp64.val32.upper;
+ c->ErrDesc.Len = sizeof(*c->err_info);
+
+ c->h = h;
+ return c;
+}
+
+/* For operations that can wait for kmalloc to possibly sleep,
+ * this routine can be called. Lock need not be held to call
+ * cmd_special_alloc. cmd_special_free() is the complement.
+ */
+static struct CommandList *cmd_special_alloc(struct ctlr_info *h)
+{
+ struct CommandList *c;
+ union u64bit temp64;
+ dma_addr_t cmd_dma_handle, err_dma_handle;
+
+ c = pci_alloc_consistent(h->pdev, sizeof(*c), &cmd_dma_handle);
+ if (c == NULL)
+ return NULL;
+ memset(c, 0, sizeof(*c));
+
+ c->cmdindex = -1;
+
+ c->err_info = pci_alloc_consistent(h->pdev, sizeof(*c->err_info),
+ &err_dma_handle);
+
+ if (c->err_info == NULL) {
+ pci_free_consistent(h->pdev,
+ sizeof(*c), c, cmd_dma_handle);
+ return NULL;
+ }
+ memset(c->err_info, 0, sizeof(*c->err_info));
+
+ INIT_HLIST_NODE(&c->list);
+ c->busaddr = (__u32) cmd_dma_handle;
+ temp64.val = (__u64) err_dma_handle;
+ c->ErrDesc.Addr.lower = temp64.val32.lower;
+ c->ErrDesc.Addr.upper = temp64.val32.upper;
+ c->ErrDesc.Len = sizeof(*c->err_info);
+
+ c->h = h;
+ return c;
+}
+
+static void cmd_free(struct ctlr_info *h, struct CommandList *c)
+{
+ int i;
+
+ i = c - h->cmd_pool;
+ clear_bit(i & (BITS_PER_LONG - 1),
+ h->cmd_pool_bits + (i / BITS_PER_LONG));
+ h->nr_frees++;
+}
+
+static void cmd_special_free(struct ctlr_info *h, struct CommandList *c)
+{
+ union u64bit temp64;
+
+ temp64.val32.lower = c->ErrDesc.Addr.lower;
+ temp64.val32.upper = c->ErrDesc.Addr.upper;
+ pci_free_consistent(h->pdev, sizeof(*c->err_info),
+ c->err_info, (dma_addr_t) temp64.val);
+ pci_free_consistent(h->pdev, sizeof(*c),
+ c, (dma_addr_t) c->busaddr);
+}
+
+#ifdef CONFIG_COMPAT
+
+static int do_ioctl(struct scsi_device *dev, int cmd, void *arg)
+{
+ int ret;
+
+ lock_kernel();
+ ret = hpsa_ioctl(dev, cmd, arg);
+ unlock_kernel();
+ return ret;
+}
+
+static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg);
+static int hpsa_ioctl32_big_passthru(struct scsi_device *dev,
+ int cmd, void *arg);
+
+static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg)
+{
+ switch (cmd) {
+ case CCISS_GETPCIINFO:
+ case CCISS_GETINTINFO:
+ case CCISS_SETINTINFO:
+ case CCISS_GETNODENAME:
+ case CCISS_SETNODENAME:
+ case CCISS_GETHEARTBEAT:
+ case CCISS_GETBUSTYPES:
+ case CCISS_GETFIRMVER:
+ case CCISS_GETDRIVVER:
+ case CCISS_REVALIDVOLS:
+ case CCISS_DEREGDISK:
+ case CCISS_REGNEWDISK:
+ case CCISS_REGNEWD:
+ case CCISS_RESCANDISK:
+ case CCISS_GETLUNINFO:
+ return do_ioctl(dev, cmd, arg);
+
+ case CCISS_PASSTHRU32:
+ return hpsa_ioctl32_passthru(dev, cmd, arg);
+ case CCISS_BIG_PASSTHRU32:
+ return hpsa_ioctl32_big_passthru(dev, cmd, arg);
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+
+static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg)
+{
+ IOCTL32_Command_struct __user *arg32 =
+ (IOCTL32_Command_struct __user *) arg;
+ IOCTL_Command_struct arg64;
+ IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64));
+ int err;
+ u32 cp;
+
+ err = 0;
+ err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
+ sizeof(arg64.LUN_info));
+ err |= copy_from_user(&arg64.Request, &arg32->Request,
+ sizeof(arg64.Request));
+ err |= copy_from_user(&arg64.error_info, &arg32->error_info,
+ sizeof(arg64.error_info));
+ err |= get_user(arg64.buf_size, &arg32->buf_size);
+ err |= get_user(cp, &arg32->buf);
+ arg64.buf = compat_ptr(cp);
+ err |= copy_to_user(p, &arg64, sizeof(arg64));
+
+ if (err)
+ return -EFAULT;
+
+ err = do_ioctl(dev, CCISS_PASSTHRU, (void *)p);
+ if (err)
+ return err;
+ err |= copy_in_user(&arg32->error_info, &p->error_info,
+ sizeof(arg32->error_info));
+ if (err)
+ return -EFAULT;
+ return err;
+}
+
+static int hpsa_ioctl32_big_passthru(struct scsi_device *dev,
+ int cmd, void *arg)
+{
+ BIG_IOCTL32_Command_struct __user *arg32 =
+ (BIG_IOCTL32_Command_struct __user *) arg;
+ BIG_IOCTL_Command_struct arg64;
+ BIG_IOCTL_Command_struct __user *p =
+ compat_alloc_user_space(sizeof(arg64));
+ int err;
+ u32 cp;
+
+ err = 0;
+ err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
+ sizeof(arg64.LUN_info));
+ err |= copy_from_user(&arg64.Request, &arg32->Request,
+ sizeof(arg64.Request));
+ err |= copy_from_user(&arg64.error_info, &arg32->error_info,
+ sizeof(arg64.error_info));
+ err |= get_user(arg64.buf_size, &arg32->buf_size);
+ err |= get_user(arg64.malloc_size, &arg32->malloc_size);
+ err |= get_user(cp, &arg32->buf);
+ arg64.buf = compat_ptr(cp);
+ err |= copy_to_user(p, &arg64, sizeof(arg64));
+
+ if (err)
+ return -EFAULT;
+
+ err = do_ioctl(dev, CCISS_BIG_PASSTHRU, (void *)p);
+ if (err)
+ return err;
+ err |= copy_in_user(&arg32->error_info, &p->error_info,
+ sizeof(arg32->error_info));
+ if (err)
+ return -EFAULT;
+ return err;
+}
+#endif
+
+static int hpsa_getpciinfo_ioctl(struct ctlr_info *h, void __user *argp)
+{
+ struct hpsa_pci_info pciinfo;
+
+ if (!argp)
+ return -EINVAL;
+ pciinfo.domain = pci_domain_nr(h->pdev->bus);
+ pciinfo.bus = h->pdev->bus->number;
+ pciinfo.dev_fn = h->pdev->devfn;
+ pciinfo.board_id = h->board_id;
+ if (copy_to_user(argp, &pciinfo, sizeof(pciinfo)))
+ return -EFAULT;
+ return 0;
+}
+
+static int hpsa_getdrivver_ioctl(struct ctlr_info *h, void __user *argp)
+{
+ DriverVer_type DriverVer;
+ unsigned char vmaj, vmin, vsubmin;
+ int rc;
+
+ rc = sscanf(HPSA_DRIVER_VERSION, "%hhu.%hhu.%hhu",
+ &vmaj, &vmin, &vsubmin);
+ if (rc != 3) {
+ dev_info(&h->pdev->dev, "driver version string '%s' "
+ "unrecognized.", HPSA_DRIVER_VERSION);
+ vmaj = 0;
+ vmin = 0;
+ vsubmin = 0;
+ }
+ DriverVer = (vmaj << 16) | (vmin << 8) | vsubmin;
+ if (!argp)
+ return -EINVAL;
+ if (copy_to_user(argp, &DriverVer, sizeof(DriverVer_type)))
+ return -EFAULT;
+ return 0;
+}
+
+static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
+{
+ IOCTL_Command_struct iocommand;
+ struct CommandList *c;
+ char *buff = NULL;
+ union u64bit temp64;
+
+ if (!argp)
+ return -EINVAL;
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
+ if (copy_from_user(&iocommand, argp, sizeof(iocommand)))
+ return -EFAULT;
+ if ((iocommand.buf_size < 1) &&
+ (iocommand.Request.Type.Direction != XFER_NONE)) {
+ return -EINVAL;
+ }
+ if (iocommand.buf_size > 0) {
+ buff = kmalloc(iocommand.buf_size, GFP_KERNEL);
+ if (buff == NULL)
+ return -EFAULT;
+ }
+ if (iocommand.Request.Type.Direction == XFER_WRITE) {
+ /* Copy the data into the buffer we created */
+ if (copy_from_user(buff, iocommand.buf, iocommand.buf_size)) {
+ kfree(buff);
+ return -EFAULT;
+ }
+ } else
+ memset(buff, 0, iocommand.buf_size);
+ c = cmd_special_alloc(h);
+ if (c == NULL) {
+ kfree(buff);
+ return -ENOMEM;
+ }
+ /* Fill in the command type */
+ c->cmd_type = CMD_IOCTL_PEND;
+ /* Fill in Command Header */
+ c->Header.ReplyQueue = 0; /* unused in simple mode */
+ if (iocommand.buf_size > 0) { /* buffer to fill */
+ c->Header.SGList = 1;
+ c->Header.SGTotal = 1;
+ } else { /* no buffers to fill */
+ c->Header.SGList = 0;
+ c->Header.SGTotal = 0;
+ }
+ memcpy(&c->Header.LUN, &iocommand.LUN_info, sizeof(c->Header.LUN));
+ /* use the kernel address the cmd block for tag */
+ c->Header.Tag.lower = c->busaddr;
+
+ /* Fill in Request block */
+ memcpy(&c->Request, &iocommand.Request,
+ sizeof(c->Request));
+
+ /* Fill in the scatter gather information */
+ if (iocommand.buf_size > 0) {
+ temp64.val = pci_map_single(h->pdev, buff,
+ iocommand.buf_size, PCI_DMA_BIDIRECTIONAL);
+ c->SG[0].Addr.lower = temp64.val32.lower;
+ c->SG[0].Addr.upper = temp64.val32.upper;
+ c->SG[0].Len = iocommand.buf_size;
+ c->SG[0].Ext = 0; /* we are not chaining*/
+ }
+ hpsa_scsi_do_simple_cmd_core(h, c);
+ hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL);
+ check_ioctl_unit_attention(h, c);
+
+ /* Copy the error information out */
+ memcpy(&iocommand.error_info, c->err_info,
+ sizeof(iocommand.error_info));
+ if (copy_to_user(argp, &iocommand, sizeof(iocommand))) {
+ kfree(buff);
+ cmd_special_free(h, c);
+ return -EFAULT;
+ }
+
+ if (iocommand.Request.Type.Direction == XFER_READ) {
+ /* Copy the data out of the buffer we created */
+ if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) {
+ kfree(buff);
+ cmd_special_free(h, c);
+ return -EFAULT;
+ }
+ }
+ kfree(buff);
+ cmd_special_free(h, c);
+ return 0;
+}
+
+static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
+{
+ BIG_IOCTL_Command_struct *ioc;
+ struct CommandList *c;
+ unsigned char **buff = NULL;
+ int *buff_size = NULL;
+ union u64bit temp64;
+ BYTE sg_used = 0;
+ int status = 0;
+ int i;
+ __u32 left;
+ __u32 sz;
+ BYTE __user *data_ptr;
+
+ if (!argp)
+ return -EINVAL;
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
+ ioc = (BIG_IOCTL_Command_struct *)
+ kmalloc(sizeof(*ioc), GFP_KERNEL);
+ if (!ioc) {
+ status = -ENOMEM;
+ goto cleanup1;
+ }
+ if (copy_from_user(ioc, argp, sizeof(*ioc))) {
+ status = -EFAULT;
+ goto cleanup1;
+ }
+ if ((ioc->buf_size < 1) &&
+ (ioc->Request.Type.Direction != XFER_NONE)) {
+ status = -EINVAL;
+ goto cleanup1;
+ }
+ /* Check kmalloc limits using all SGs */
+ if (ioc->malloc_size > MAX_KMALLOC_SIZE) {
+ status = -EINVAL;
+ goto cleanup1;
+ }
+ if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) {
+ status = -EINVAL;
+ goto cleanup1;
+ }
+ buff = kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL);
+ if (!buff) {
+ status = -ENOMEM;
+ goto cleanup1;
+ }
+ buff_size = kmalloc(MAXSGENTRIES * sizeof(int), GFP_KERNEL);
+ if (!buff_size) {
+ status = -ENOMEM;
+ goto cleanup1;
+ }
+ left = ioc->buf_size;
+ data_ptr = ioc->buf;
+ while (left) {
+ sz = (left > ioc->malloc_size) ? ioc->malloc_size : left;
+ buff_size[sg_used] = sz;
+ buff[sg_used] = kmalloc(sz, GFP_KERNEL);
+ if (buff[sg_used] == NULL) {
+ status = -ENOMEM;
+ goto cleanup1;
+ }
+ if (ioc->Request.Type.Direction == XFER_WRITE) {
+ if (copy_from_user(buff[sg_used], data_ptr, sz)) {
+ status = -ENOMEM;
+ goto cleanup1;
+ }
+ } else
+ memset(buff[sg_used], 0, sz);
+ left -= sz;
+ data_ptr += sz;
+ sg_used++;
+ }
+ c = cmd_special_alloc(h);
+ if (c == NULL) {
+ status = -ENOMEM;
+ goto cleanup1;
+ }
+ c->cmd_type = CMD_IOCTL_PEND;
+ c->Header.ReplyQueue = 0;
+
+ if (ioc->buf_size > 0) {
+ c->Header.SGList = sg_used;
+ c->Header.SGTotal = sg_used;
+ } else {
+ c->Header.SGList = 0;
+ c->Header.SGTotal = 0;
+ }
+ memcpy(&c->Header.LUN, &ioc->LUN_info, sizeof(c->Header.LUN));
+ c->Header.Tag.lower = c->busaddr;
+ memcpy(&c->Request, &ioc->Request, sizeof(c->Request));
+ if (ioc->buf_size > 0) {
+ int i;
+ for (i = 0; i < sg_used; i++) {
+ temp64.val = pci_map_single(h->pdev, buff[i],
+ buff_size[i], PCI_DMA_BIDIRECTIONAL);
+ c->SG[i].Addr.lower = temp64.val32.lower;
+ c->SG[i].Addr.upper = temp64.val32.upper;
+ c->SG[i].Len = buff_size[i];
+ /* we are not chaining */
+ c->SG[i].Ext = 0;
+ }
+ }
+ hpsa_scsi_do_simple_cmd_core(h, c);
+ hpsa_pci_unmap(h->pdev, c, sg_used, PCI_DMA_BIDIRECTIONAL);
+ check_ioctl_unit_attention(h, c);
+ /* Copy the error information out */
+ memcpy(&ioc->error_info, c->err_info, sizeof(ioc->error_info));
+ if (copy_to_user(argp, ioc, sizeof(*ioc))) {
+ cmd_special_free(h, c);
+ status = -EFAULT;
+ goto cleanup1;
+ }
+ if (ioc->Request.Type.Direction == XFER_READ) {
+ /* Copy the data out of the buffer we created */
+ BYTE __user *ptr = ioc->buf;
+ for (i = 0; i < sg_used; i++) {
+ if (copy_to_user(ptr, buff[i], buff_size[i])) {
+ cmd_special_free(h, c);
+ status = -EFAULT;
+ goto cleanup1;
+ }
+ ptr += buff_size[i];
+ }
+ }
+ cmd_special_free(h, c);
+ status = 0;
+cleanup1:
+ if (buff) {
+ for (i = 0; i < sg_used; i++)
+ kfree(buff[i]);
+ kfree(buff);
+ }
+ kfree(buff_size);
+ kfree(ioc);
+ return status;
+}
+
+static void check_ioctl_unit_attention(struct ctlr_info *h,
+ struct CommandList *c)
+{
+ if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
+ c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION)
+ (void) check_for_unit_attention(h, c);
+}
+/*
+ * ioctl
+ */
+static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg)
+{
+ struct ctlr_info *h;
+ void __user *argp = (void __user *)arg;
+
+ h = sdev_to_hba(dev);
+
+ switch (cmd) {
+ case CCISS_DEREGDISK:
+ case CCISS_REGNEWDISK:
+ case CCISS_REGNEWD:
+ hpsa_update_scsi_devices(h, dev->host->host_no);
+ return 0;
+ case CCISS_GETPCIINFO:
+ return hpsa_getpciinfo_ioctl(h, argp);
+ case CCISS_GETDRIVVER:
+ return hpsa_getdrivver_ioctl(h, argp);
+ case CCISS_PASSTHRU:
+ return hpsa_passthru_ioctl(h, argp);
+ case CCISS_BIG_PASSTHRU:
+ return hpsa_big_passthru_ioctl(h, argp);
+ default:
+ return -ENOTTY;
+ }
+}
+
+static void fill_cmd(struct CommandList *c, __u8 cmd, struct ctlr_info *h,
+ void *buff, size_t size, __u8 page_code, unsigned char *scsi3addr,
+ int cmd_type)
+{
+ int pci_dir = XFER_NONE;
+
+ c->cmd_type = CMD_IOCTL_PEND;
+ c->Header.ReplyQueue = 0;
+ if (buff != NULL && size > 0) {
+ c->Header.SGList = 1;
+ c->Header.SGTotal = 1;
+ } else {
+ c->Header.SGList = 0;
+ c->Header.SGTotal = 0;
+ }
+ c->Header.Tag.lower = c->busaddr;
+ memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8);
+
+ c->Request.Type.Type = cmd_type;
+ if (cmd_type == TYPE_CMD) {
+ switch (cmd) {
+ case HPSA_INQUIRY:
+ /* are we trying to read a vital product page */
+ if (page_code != 0) {
+ c->Request.CDB[1] = 0x01;
+ c->Request.CDB[2] = page_code;
+ }
+ c->Request.CDBLen = 6;
+ c->Request.Type.Attribute = ATTR_SIMPLE;
+ c->Request.Type.Direction = XFER_READ;
+ c->Request.Timeout = 0;
+ c->Request.CDB[0] = HPSA_INQUIRY;
+ c->Request.CDB[4] = size & 0xFF;
+ break;
+ case HPSA_REPORT_LOG:
+ case HPSA_REPORT_PHYS:
+ /* Talking to controller so It's a physical command
+ mode = 00 target = 0. Nothing to write.
+ */
+ c->Request.CDBLen = 12;
+ c->Request.Type.Attribute = ATTR_SIMPLE;
+ c->Request.Type.Direction = XFER_READ;
+ c->Request.Timeout = 0;
+ c->Request.CDB[0] = cmd;
+ c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */
+ c->Request.CDB[7] = (size >> 16) & 0xFF;
+ c->Request.CDB[8] = (size >> 8) & 0xFF;
+ c->Request.CDB[9] = size & 0xFF;
+ break;
+
+ case HPSA_READ_CAPACITY:
+ c->Request.CDBLen = 10;
+ c->Request.Type.Attribute = ATTR_SIMPLE;
+ c->Request.Type.Direction = XFER_READ;
+ c->Request.Timeout = 0;
+ c->Request.CDB[0] = cmd;
+ break;
+ case HPSA_CACHE_FLUSH:
+ c->Request.CDBLen = 12;
+ c->Request.Type.Attribute = ATTR_SIMPLE;
+ c->Request.Type.Direction = XFER_WRITE;
+ c->Request.Timeout = 0;
+ c->Request.CDB[0] = BMIC_WRITE;
+ c->Request.CDB[6] = BMIC_CACHE_FLUSH;
+ break;
+ case TEST_UNIT_READY:
+ c->Request.CDBLen = 6;
+ c->Request.Type.Attribute = ATTR_SIMPLE;
+ c->Request.Type.Direction = XFER_NONE;
+ c->Request.Timeout = 0;
+ break;
+ default:
+ dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd);
+ BUG();
+ return;
+ }
+ } else if (cmd_type == TYPE_MSG) {
+ switch (cmd) {
+
+ case HPSA_DEVICE_RESET_MSG:
+ c->Request.CDBLen = 16;
+ c->Request.Type.Type = 1; /* It is a MSG not a CMD */
+ c->Request.Type.Attribute = ATTR_SIMPLE;
+ c->Request.Type.Direction = XFER_NONE;
+ c->Request.Timeout = 0; /* Don't time out */
+ c->Request.CDB[0] = 0x01; /* RESET_MSG is 0x01 */
+ c->Request.CDB[1] = 0x03; /* Reset target above */
+ /* If bytes 4-7 are zero, it means reset the */
+ /* LunID device */
+ c->Request.CDB[4] = 0x00;
+ c->Request.CDB[5] = 0x00;
+ c->Request.CDB[6] = 0x00;
+ c->Request.CDB[7] = 0x00;
+ break;
+
+ default:
+ dev_warn(&h->pdev->dev, "unknown message type %d\n",
+ cmd);
+ BUG();
+ }
+ } else {
+ dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type);
+ BUG();
+ }
+
+ switch (c->Request.Type.Direction) {
+ case XFER_READ:
+ pci_dir = PCI_DMA_FROMDEVICE;
+ break;
+ case XFER_WRITE:
+ pci_dir = PCI_DMA_TODEVICE;
+ break;
+ case XFER_NONE:
+ pci_dir = PCI_DMA_NONE;
+ break;
+ default:
+ pci_dir = PCI_DMA_BIDIRECTIONAL;
+ }
+
+ hpsa_map_one(h->pdev, c, buff, size, pci_dir);
+
+ return;
+}
+
+/*
+ * Map (physical) PCI mem into (virtual) kernel space
+ */
+static void __iomem *remap_pci_mem(ulong base, ulong size)
+{
+ ulong page_base = ((ulong) base) & PAGE_MASK;
+ ulong page_offs = ((ulong) base) - page_base;
+ void __iomem *page_remapped = ioremap(page_base, page_offs + size);
+
+ return page_remapped ? (page_remapped + page_offs) : NULL;
+}
+
+/* Takes cmds off the submission queue and sends them to the hardware,
+ * then puts them on the queue of cmds waiting for completion.
+ */
+static void start_io(struct ctlr_info *h)
+{
+ struct CommandList *c;
+
+ while (!hlist_empty(&h->reqQ)) {
+ c = hlist_entry(h->reqQ.first, struct CommandList, list);
+ /* can't do anything if fifo is full */
+ if ((h->access.fifo_full(h))) {
+ dev_warn(&h->pdev->dev, "fifo full\n");
+ break;
+ }
+
+ /* Get the first entry from the Request Q */
+ removeQ(c);
+ h->Qdepth--;
+
+ /* Tell the controller execute command */
+ h->access.submit_command(h, c);
+
+ /* Put job onto the completed Q */
+ addQ(&h->cmpQ, c);
+ }
+}
+
+static inline unsigned long get_next_completion(struct ctlr_info *h)
+{
+ return h->access.command_completed(h);
+}
+
+static inline int interrupt_pending(struct ctlr_info *h)
+{
+ return h->access.intr_pending(h);
+}
+
+static inline long interrupt_not_for_us(struct ctlr_info *h)
+{
+ return ((h->access.intr_pending(h) == 0) ||
+ (h->interrupts_enabled == 0));
+}
+
+static inline int bad_tag(struct ctlr_info *h, __u32 tag_index,
+ __u32 raw_tag)
+{
+ if (unlikely(tag_index >= h->nr_cmds)) {
+ dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag);
+ return 1;
+ }
+ return 0;
+}
+
+static inline void finish_cmd(struct CommandList *c, __u32 raw_tag)
+{
+ removeQ(c);
+ if (likely(c->cmd_type == CMD_SCSI))
+ complete_scsi_command(c, 0, raw_tag);
+ else if (c->cmd_type == CMD_IOCTL_PEND)
+ complete(c->waiting);
+}
+
+static irqreturn_t do_hpsa_intr(int irq, void *dev_id)
+{
+ struct ctlr_info *h = dev_id;
+ struct CommandList *c;
+ unsigned long flags;
+ __u32 raw_tag, tag, tag_index;
+ struct hlist_node *tmp;
+
+ if (interrupt_not_for_us(h))
+ return IRQ_NONE;
+ spin_lock_irqsave(&h->lock, flags);
+ while (interrupt_pending(h)) {
+ while ((raw_tag = get_next_completion(h)) != FIFO_EMPTY) {
+ if (likely(HPSA_TAG_CONTAINS_INDEX(raw_tag))) {
+ tag_index = HPSA_TAG_TO_INDEX(raw_tag);
+ if (bad_tag(h, tag_index, raw_tag))
+ return IRQ_HANDLED;
+ c = h->cmd_pool + tag_index;
+ finish_cmd(c, raw_tag);
+ continue;
+ }
+ tag = HPSA_TAG_DISCARD_ERROR_BITS(raw_tag);
+ c = NULL;
+ hlist_for_each_entry(c, tmp, &h->cmpQ, list) {
+ if (c->busaddr == tag) {
+ finish_cmd(c, raw_tag);
+ break;
+ }
+ }
+ }
+ }
+ spin_unlock_irqrestore(&h->lock, flags);
+ return IRQ_HANDLED;
+}
+
+/* Send a message CDB to the firmware. */
+static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
+ unsigned char type)
+{
+ struct Command {
+ struct CommandListHeader CommandHeader;
+ struct RequestBlock Request;
+ struct ErrDescriptor ErrorDescriptor;
+ };
+ struct Command *cmd;
+ static const size_t cmd_sz = sizeof(*cmd) +
+ sizeof(cmd->ErrorDescriptor);
+ dma_addr_t paddr64;
+ uint32_t paddr32, tag;
+ void __iomem *vaddr;
+ int i, err;
+
+ vaddr = pci_ioremap_bar(pdev, 0);
+ if (vaddr == NULL)
+ return -ENOMEM;
+
+ /* The Inbound Post Queue only accepts 32-bit physical addresses for the
+ * CCISS commands, so they must be allocated from the lower 4GiB of
+ * memory.
+ */
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ iounmap(vaddr);
+ return -ENOMEM;
+ }
+
+ cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64);
+ if (cmd == NULL) {
+ iounmap(vaddr);
+ return -ENOMEM;
+ }
+
+ /* This must fit, because of the 32-bit consistent DMA mask. Also,
+ * although there's no guarantee, we assume that the address is at
+ * least 4-byte aligned (most likely, it's page-aligned).
+ */
+ paddr32 = paddr64;
+
+ cmd->CommandHeader.ReplyQueue = 0;
+ cmd->CommandHeader.SGList = 0;
+ cmd->CommandHeader.SGTotal = 0;
+ cmd->CommandHeader.Tag.lower = paddr32;
+ cmd->CommandHeader.Tag.upper = 0;
+ memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8);
+
+ cmd->Request.CDBLen = 16;
+ cmd->Request.Type.Type = TYPE_MSG;
+ cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE;
+ cmd->Request.Type.Direction = XFER_NONE;
+ cmd->Request.Timeout = 0; /* Don't time out */
+ cmd->Request.CDB[0] = opcode;
+ cmd->Request.CDB[1] = type;
+ memset(&cmd->Request.CDB[2], 0, 14); /* rest of the CDB is reserved */
+ cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(*cmd);
+ cmd->ErrorDescriptor.Addr.upper = 0;
+ cmd->ErrorDescriptor.Len = sizeof(struct ErrorInfo);
+
+ writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET);
+
+ for (i = 0; i < HPSA_MSG_SEND_RETRY_LIMIT; i++) {
+ tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
+ if (HPSA_TAG_DISCARD_ERROR_BITS(tag) == paddr32)
+ break;
+ msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS);
+ }
+
+ iounmap(vaddr);
+
+ /* we leak the DMA buffer here ... no choice since the controller could
+ * still complete the command.
+ */
+ if (i == HPSA_MSG_SEND_RETRY_LIMIT) {
+ dev_err(&pdev->dev, "controller message %02x:%02x timed out\n",
+ opcode, type);
+ return -ETIMEDOUT;
+ }
+
+ pci_free_consistent(pdev, cmd_sz, cmd, paddr64);
+
+ if (tag & HPSA_ERROR_BIT) {
+ dev_err(&pdev->dev, "controller message %02x:%02x failed\n",
+ opcode, type);
+ return -EIO;
+ }
+
+ dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n",
+ opcode, type);
+ return 0;
+}
+
+#define hpsa_soft_reset_controller(p) hpsa_message(p, 1, 0)
+#define hpsa_noop(p) hpsa_message(p, 3, 0)
+
+static __devinit int hpsa_reset_msi(struct pci_dev *pdev)
+{
+/* the #defines are stolen from drivers/pci/msi.h. */
+#define msi_control_reg(base) (base + PCI_MSI_FLAGS)
+#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
+
+ int pos;
+ u16 control = 0;
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
+ if (pos) {
+ pci_read_config_word(pdev, msi_control_reg(pos), &control);
+ if (control & PCI_MSI_FLAGS_ENABLE) {
+ dev_info(&pdev->dev, "resetting MSI\n");
+ pci_write_config_word(pdev, msi_control_reg(pos),
+ control & ~PCI_MSI_FLAGS_ENABLE);
+ }
+ }
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
+ if (pos) {
+ pci_read_config_word(pdev, msi_control_reg(pos), &control);
+ if (control & PCI_MSIX_FLAGS_ENABLE) {
+ dev_info(&pdev->dev, "resetting MSI-X\n");
+ pci_write_config_word(pdev, msi_control_reg(pos),
+ control & ~PCI_MSIX_FLAGS_ENABLE);
+ }
+ }
+
+ return 0;
+}
+
+/* This does a hard reset of the controller using PCI power management
+ * states.
+ */
+static __devinit int hpsa_hard_reset_controller(struct pci_dev *pdev)
+{
+ u16 pmcsr, saved_config_space[32];
+ int i, pos;
+
+ dev_info(&pdev->dev, "using PCI PM to reset controller\n");
+
+ /* This is very nearly the same thing as
+ *
+ * pci_save_state(pci_dev);
+ * pci_set_power_state(pci_dev, PCI_D3hot);
+ * pci_set_power_state(pci_dev, PCI_D0);
+ * pci_restore_state(pci_dev);
+ *
+ * but we can't use these nice canned kernel routines on
+ * kexec, because they also check the MSI/MSI-X state in PCI
+ * configuration space and do the wrong thing when it is
+ * set/cleared. Also, the pci_save/restore_state functions
+ * violate the ordering requirements for restoring the
+ * configuration space from the CCISS document (see the
+ * comment below). So we roll our own ....
+ */
+
+ for (i = 0; i < 32; i++)
+ pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (pos == 0) {
+ dev_err(&pdev->dev,
+ "hpsa_reset_controller: PCI PM not supported\n");
+ return -ENODEV;
+ }
+
+ /* Quoting from the Open CISS Specification: "The Power
+ * Management Control/Status Register (CSR) controls the power
+ * state of the device. The normal operating state is D0,
+ * CSR=00h. The software off state is D3, CSR=03h. To reset
+ * the controller, place the interface device in D3 then to
+ * D0, this causes a secondary PCI reset which will reset the
+ * controller."
+ */
+
+ /* enter the D3hot power management state */
+ pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= PCI_D3hot;
+ pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+
+ msleep(500);
+
+ /* enter the D0 power management state */
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= PCI_D0;
+ pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+
+ msleep(500);
+
+ /* Restore the PCI configuration space. The Open CISS
+ * Specification says, "Restore the PCI Configuration
+ * Registers, offsets 00h through 60h. It is important to
+ * restore the command register, 16-bits at offset 04h,
+ * last. Do not restore the configuration status register,
+ * 16-bits at offset 06h." Note that the offset is 2*i.
+ */
+ for (i = 0; i < 32; i++) {
+ if (i == 2 || i == 3)
+ continue;
+ pci_write_config_word(pdev, 2*i, saved_config_space[i]);
+ }
+ wmb();
+ pci_write_config_word(pdev, 4, saved_config_space[2]);
+
+ return 0;
+}
+
+/*
+ * We cannot read the structure directly, for portability we must use
+ * the io functions.
+ * This is for debug only.
+ */
+#ifdef HPSA_DEBUG
+static void print_cfg_table(struct device *dev, struct CfgTable *tb)
+{
+ int i;
+ char temp_name[17];
+
+ dev_info(dev, "Controller Configuration information\n");
+ dev_info(dev, "------------------------------------\n");
+ for (i = 0; i < 4; i++)
+ temp_name[i] = readb(&(tb->Signature[i]));
+ temp_name[4] = '\0';
+ dev_info(dev, " Signature = %s\n", temp_name);
+ dev_info(dev, " Spec Number = %d\n", readl(&(tb->SpecValence)));
+ dev_info(dev, " Transport methods supported = 0x%x\n",
+ readl(&(tb->TransportSupport)));
+ dev_info(dev, " Transport methods active = 0x%x\n",
+ readl(&(tb->TransportActive)));
+ dev_info(dev, " Requested transport Method = 0x%x\n",
+ readl(&(tb->HostWrite.TransportRequest)));
+ dev_info(dev, " Coalesce Interrupt Delay = 0x%x\n",
+ readl(&(tb->HostWrite.CoalIntDelay)));
+ dev_info(dev, " Coalesce Interrupt Count = 0x%x\n",
+ readl(&(tb->HostWrite.CoalIntCount)));
+ dev_info(dev, " Max outstanding commands = 0x%d\n",
+ readl(&(tb->CmdsOutMax)));
+ dev_info(dev, " Bus Types = 0x%x\n", readl(&(tb->BusTypes)));
+ for (i = 0; i < 16; i++)
+ temp_name[i] = readb(&(tb->ServerName[i]));
+ temp_name[16] = '\0';
+ dev_info(dev, " Server Name = %s\n", temp_name);
+ dev_info(dev, " Heartbeat Counter = 0x%x\n\n\n",
+ readl(&(tb->HeartBeat)));
+}
+#endif /* HPSA_DEBUG */
+
+static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
+{
+ int i, offset, mem_type, bar_type;
+
+ if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */
+ return 0;
+ offset = 0;
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE;
+ if (bar_type == PCI_BASE_ADDRESS_SPACE_IO)
+ offset += 4;
+ else {
+ mem_type = pci_resource_flags(pdev, i) &
+ PCI_BASE_ADDRESS_MEM_TYPE_MASK;
+ switch (mem_type) {
+ case PCI_BASE_ADDRESS_MEM_TYPE_32:
+ case PCI_BASE_ADDRESS_MEM_TYPE_1M:
+ offset += 4; /* 32 bit */
+ break;
+ case PCI_BASE_ADDRESS_MEM_TYPE_64:
+ offset += 8;
+ break;
+ default: /* reserved in PCI 2.2 */
+ dev_warn(&pdev->dev,
+ "base address is invalid\n");
+ return -1;
+ break;
+ }
+ }
+ if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0)
+ return i + 1;
+ }
+ return -1;
+}
+
+/* If MSI/MSI-X is supported by the kernel we will try to enable it on
+ * controllers that are capable. If not, we use IO-APIC mode.
+ */
+
+static void __devinit hpsa_interrupt_mode(struct ctlr_info *h,
+ struct pci_dev *pdev, __u32 board_id)
+{
+#ifdef CONFIG_PCI_MSI
+ int err;
+ struct msix_entry hpsa_msix_entries[4] = { {0, 0}, {0, 1},
+ {0, 2}, {0, 3}
+ };
+
+ /* Some boards advertise MSI but don't really support it */
+ if ((board_id == 0x40700E11) ||
+ (board_id == 0x40800E11) ||
+ (board_id == 0x40820E11) || (board_id == 0x40830E11))
+ goto default_int_mode;
+ if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
+ dev_info(&pdev->dev, "MSIX\n");
+ err = pci_enable_msix(pdev, hpsa_msix_entries, 4);
+ if (!err) {
+ h->intr[0] = hpsa_msix_entries[0].vector;
+ h->intr[1] = hpsa_msix_entries[1].vector;
+ h->intr[2] = hpsa_msix_entries[2].vector;
+ h->intr[3] = hpsa_msix_entries[3].vector;
+ h->msix_vector = 1;
+ return;
+ }
+ if (err > 0) {
+ dev_warn(&pdev->dev, "only %d MSI-X vectors "
+ "available\n", err);
+ goto default_int_mode;
+ } else {
+ dev_warn(&pdev->dev, "MSI-X init failed %d\n",
+ err);
+ goto default_int_mode;
+ }
+ }
+ if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) {
+ dev_info(&pdev->dev, "MSI\n");
+ if (!pci_enable_msi(pdev))
+ h->msi_vector = 1;
+ else
+ dev_warn(&pdev->dev, "MSI init failed\n");
+ }
+default_int_mode:
+#endif /* CONFIG_PCI_MSI */
+ /* if we get here we're going to use the default interrupt mode */
+ h->intr[SIMPLE_MODE_INT] = pdev->irq;
+ return;
+}
+
+static int hpsa_pci_init(struct ctlr_info *h, struct pci_dev *pdev)
+{
+ ushort subsystem_vendor_id, subsystem_device_id, command;
+ __u32 board_id, scratchpad = 0;
+ __u64 cfg_offset;
+ __u32 cfg_base_addr;
+ __u64 cfg_base_addr_index;
+ int i, prod_index, err;
+
+ subsystem_vendor_id = pdev->subsystem_vendor;
+ subsystem_device_id = pdev->subsystem_device;
+ board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
+ subsystem_vendor_id);
+
+ for (i = 0; i < ARRAY_SIZE(products); i++)
+ if (board_id == products[i].board_id)
+ break;
+
+ prod_index = i;
+
+ if (prod_index == ARRAY_SIZE(products)) {
+ prod_index--;
+ if (subsystem_vendor_id != PCI_VENDOR_ID_HP ||
+ !hpsa_allow_any) {
+ dev_warn(&pdev->dev, "unrecognized board ID:"
+ " 0x%08lx, ignoring.\n",
+ (unsigned long) board_id);
+ return -ENODEV;
+ }
+ }
+ /* check to see if controller has been disabled
+ * BEFORE trying to enable it
+ */
+ (void)pci_read_config_word(pdev, PCI_COMMAND, &command);
+ if (!(command & 0x02)) {
+ dev_warn(&pdev->dev, "controller appears to be disabled\n");
+ return -ENODEV;
+ }
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_warn(&pdev->dev, "unable to enable PCI device\n");
+ return err;
+ }
+
+ err = pci_request_regions(pdev, "hpsa");
+ if (err) {
+ dev_err(&pdev->dev, "cannot obtain PCI resources, aborting\n");
+ return err;
+ }
+
+ /* If the kernel supports MSI/MSI-X we will try to enable that,
+ * else we use the IO-APIC interrupt assigned to us by system ROM.
+ */
+ hpsa_interrupt_mode(h, pdev, board_id);
+
+ /* find the memory BAR */
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ if (pci_resource_flags(pdev, i) & IORESOURCE_MEM)
+ break;
+ }
+ if (i == DEVICE_COUNT_RESOURCE) {
+ dev_warn(&pdev->dev, "no memory BAR found\n");
+ err = -ENODEV;
+ goto err_out_free_res;
+ }
+
+ h->paddr = pci_resource_start(pdev, i); /* addressing mode bits
+ * already removed
+ */
+
+ h->vaddr = remap_pci_mem(h->paddr, 0x250);
+
+ /* Wait for the board to become ready. */
+ for (i = 0; i < HPSA_BOARD_READY_ITERATIONS; i++) {
+ scratchpad = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
+ if (scratchpad == HPSA_FIRMWARE_READY)
+ break;
+ msleep(HPSA_BOARD_READY_POLL_INTERVAL_MSECS);
+ }
+ if (scratchpad != HPSA_FIRMWARE_READY) {
+ dev_warn(&pdev->dev, "board not ready, timed out.\n");
+ err = -ENODEV;
+ goto err_out_free_res;
+ }
+
+ /* get the address index number */
+ cfg_base_addr = readl(h->vaddr + SA5_CTCFG_OFFSET);
+ cfg_base_addr &= (__u32) 0x0000ffff;
+ cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr);
+ if (cfg_base_addr_index == -1) {
+ dev_warn(&pdev->dev, "cannot find cfg_base_addr_index\n");
+ err = -ENODEV;
+ goto err_out_free_res;
+ }
+
+ cfg_offset = readl(h->vaddr + SA5_CTMEM_OFFSET);
+ h->cfgtable = remap_pci_mem(pci_resource_start(pdev,
+ cfg_base_addr_index) + cfg_offset,
+ sizeof(h->cfgtable));
+ h->board_id = board_id;
+
+ /* Query controller for max supported commands: */
+ h->max_commands = readl(&(h->cfgtable->CmdsOutMax));
+
+ h->product_name = products[prod_index].product_name;
+ h->access = *(products[prod_index].access);
+ /* Allow room for some ioctls */
+ h->nr_cmds = h->max_commands - 4;
+
+ if ((readb(&h->cfgtable->Signature[0]) != 'C') ||
+ (readb(&h->cfgtable->Signature[1]) != 'I') ||
+ (readb(&h->cfgtable->Signature[2]) != 'S') ||
+ (readb(&h->cfgtable->Signature[3]) != 'S')) {
+ dev_warn(&pdev->dev, "not a valid CISS config table\n");
+ err = -ENODEV;
+ goto err_out_free_res;
+ }
+#ifdef CONFIG_X86
+ {
+ /* Need to enable prefetch in the SCSI core for 6400 in x86 */
+ __u32 prefetch;
+ prefetch = readl(&(h->cfgtable->SCSI_Prefetch));
+ prefetch |= 0x100;
+ writel(prefetch, &(h->cfgtable->SCSI_Prefetch));
+ }
+#endif
+
+ /* Disabling DMA prefetch for the P600
+ * An ASIC bug may result in a prefetch beyond
+ * physical memory.
+ */
+ if (board_id == 0x3225103C) {
+ __u32 dma_prefetch;
+ dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG);
+ dma_prefetch |= 0x8000;
+ writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG);
+ }
+
+ h->max_commands = readl(&(h->cfgtable->CmdsOutMax));
+ /* Update the field, and then ring the doorbell */
+ writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest));
+ writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
+
+ /* under certain very rare conditions, this can take awhile.
+ * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
+ * as we enter this code.)
+ */
+ for (i = 0; i < MAX_CONFIG_WAIT; i++) {
+ if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
+ break;
+ /* delay and try again */
+ msleep(10);
+ }
+
+#ifdef HPSA_DEBUG
+ print_cfg_table(&pdev->dev, h->cfgtable);
+#endif /* HPSA_DEBUG */
+
+ if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) {
+ dev_warn(&pdev->dev, "unable to get board into simple mode\n");
+ err = -ENODEV;
+ goto err_out_free_res;
+ }
+ return 0;
+
+err_out_free_res:
+ /*
+ * Deliberately omit pci_disable_device(): it does something nasty to
+ * Smart Array controllers that pci_enable_device does not undo
+ */
+ pci_release_regions(pdev);
+ return err;
+}
+
+static int __devinit hpsa_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int i;
+ int dac;
+ struct ctlr_info *h;
+
+ if (number_of_controllers == 0)
+ printk(KERN_INFO DRIVER_NAME "\n");
+ if (reset_devices) {
+ /* Reset the controller with a PCI power-cycle */
+ if (hpsa_hard_reset_controller(pdev) || hpsa_reset_msi(pdev))
+ return -ENODEV;
+
+ /* Some devices (notably the HP Smart Array 5i Controller)
+ need a little pause here */
+ msleep(HPSA_POST_RESET_PAUSE_MSECS);
+
+ /* Now try to get the controller to respond to a no-op */
+ for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) {
+ if (hpsa_noop(pdev) == 0)
+ break;
+ else
+ dev_warn(&pdev->dev, "no-op failed%s\n",
+ (i < 11 ? "; re-trying" : ""));
+ }
+ }
+
+ BUILD_BUG_ON(sizeof(struct CommandList) % 8);
+ h = kzalloc(sizeof(*h), GFP_KERNEL);
+ if (!h)
+ return -1;
+
+ h->busy_initializing = 1;
+ INIT_HLIST_HEAD(&h->cmpQ);
+ INIT_HLIST_HEAD(&h->reqQ);
+ mutex_init(&h->busy_shutting_down);
+ init_completion(&h->scan_wait);
+ if (hpsa_pci_init(h, pdev) != 0)
+ goto clean1;
+
+ sprintf(h->devname, "hpsa%d", number_of_controllers);
+ h->ctlr = number_of_controllers;
+ number_of_controllers++;
+ h->pdev = pdev;
+
+ /* configure PCI DMA stuff */
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
+ dac = 1;
+ else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
+ dac = 0;
+ else {
+ dev_err(&pdev->dev, "no suitable DMA available\n");
+ goto clean1;
+ }
+
+ /* make sure the board interrupts are off */
+ h->access.set_intr_mask(h, HPSA_INTR_OFF);
+ if (request_irq(h->intr[SIMPLE_MODE_INT], do_hpsa_intr,
+ IRQF_DISABLED | IRQF_SHARED, h->devname, h)) {
+ dev_err(&pdev->dev, "unable to get irq %d for %s\n",
+ h->intr[SIMPLE_MODE_INT], h->devname);
+ goto clean2;
+ }
+
+ dev_info(&pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
+ h->devname, pdev->device, pci_name(pdev),
+ h->intr[SIMPLE_MODE_INT], dac ? "" : " not");
+
+ h->cmd_pool_bits =
+ kmalloc(((h->nr_cmds + BITS_PER_LONG -
+ 1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL);
+ h->cmd_pool = pci_alloc_consistent(h->pdev,
+ h->nr_cmds * sizeof(*h->cmd_pool),
+ &(h->cmd_pool_dhandle));
+ h->errinfo_pool = pci_alloc_consistent(h->pdev,
+ h->nr_cmds * sizeof(*h->errinfo_pool),
+ &(h->errinfo_pool_dhandle));
+ if ((h->cmd_pool_bits == NULL)
+ || (h->cmd_pool == NULL)
+ || (h->errinfo_pool == NULL)) {
+ dev_err(&pdev->dev, "out of memory");
+ goto clean4;
+ }
+ spin_lock_init(&h->lock);
+
+ pci_set_drvdata(pdev, h);
+ memset(h->cmd_pool_bits, 0,
+ ((h->nr_cmds + BITS_PER_LONG -
+ 1) / BITS_PER_LONG) * sizeof(unsigned long));
+
+ hpsa_scsi_setup(h);
+
+ /* Turn the interrupts on so we can service requests */
+ h->access.set_intr_mask(h, HPSA_INTR_ON);
+
+ hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */
+ h->busy_initializing = 0;
+ return 1;
+
+clean4:
+ kfree(h->cmd_pool_bits);
+ if (h->cmd_pool)
+ pci_free_consistent(h->pdev,
+ h->nr_cmds * sizeof(struct CommandList),
+ h->cmd_pool, h->cmd_pool_dhandle);
+ if (h->errinfo_pool)
+ pci_free_consistent(h->pdev,
+ h->nr_cmds * sizeof(struct ErrorInfo),
+ h->errinfo_pool,
+ h->errinfo_pool_dhandle);
+ free_irq(h->intr[SIMPLE_MODE_INT], h);
+clean2:
+clean1:
+ h->busy_initializing = 0;
+ kfree(h);
+ return -1;
+}
+
+static void hpsa_flush_cache(struct ctlr_info *h)
+{
+ char *flush_buf;
+ struct CommandList *c;
+
+ flush_buf = kzalloc(4, GFP_KERNEL);
+ if (!flush_buf)
+ return;
+
+ c = cmd_special_alloc(h);
+ if (!c) {
+ dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+ goto out_of_memory;
+ }
+ fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0,
+ RAID_CTLR_LUNID, TYPE_CMD);
+ hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_TODEVICE);
+ if (c->err_info->CommandStatus != 0)
+ dev_warn(&h->pdev->dev,
+ "error flushing cache on controller\n");
+ cmd_special_free(h, c);
+out_of_memory:
+ kfree(flush_buf);
+}
+
+static void hpsa_shutdown(struct pci_dev *pdev)
+{
+ struct ctlr_info *h;
+
+ h = pci_get_drvdata(pdev);
+ /* Turn board interrupts off and send the flush cache command
+ * sendcmd will turn off interrupt, and send the flush...
+ * To write all data in the battery backed cache to disks
+ */
+ hpsa_flush_cache(h);
+ h->access.set_intr_mask(h, HPSA_INTR_OFF);
+ free_irq(h->intr[2], h);
+#ifdef CONFIG_PCI_MSI
+ if (h->msix_vector)
+ pci_disable_msix(h->pdev);
+ else if (h->msi_vector)
+ pci_disable_msi(h->pdev);
+#endif /* CONFIG_PCI_MSI */
+}
+
+static void __devexit hpsa_remove_one(struct pci_dev *pdev)
+{
+ struct ctlr_info *h;
+
+ if (pci_get_drvdata(pdev) == NULL) {
+ dev_err(&pdev->dev, "unable to remove device \n");
+ return;
+ }
+ h = pci_get_drvdata(pdev);
+ mutex_lock(&h->busy_shutting_down);
+ remove_from_scan_list(h);
+ hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */
+ hpsa_shutdown(pdev);
+ iounmap(h->vaddr);
+ pci_free_consistent(h->pdev,
+ h->nr_cmds * sizeof(struct CommandList),
+ h->cmd_pool, h->cmd_pool_dhandle);
+ pci_free_consistent(h->pdev,
+ h->nr_cmds * sizeof(struct ErrorInfo),
+ h->errinfo_pool, h->errinfo_pool_dhandle);
+ kfree(h->cmd_pool_bits);
+ /*
+ * Deliberately omit pci_disable_device(): it does something nasty to
+ * Smart Array controllers that pci_enable_device does not undo
+ */
+ pci_release_regions(pdev);
+ pci_set_drvdata(pdev, NULL);
+ mutex_unlock(&h->busy_shutting_down);
+ kfree(h);
+}
+
+static int hpsa_suspend(__attribute__((unused)) struct pci_dev *pdev,
+ __attribute__((unused)) pm_message_t state)
+{
+ return -ENOSYS;
+}
+
+static int hpsa_resume(__attribute__((unused)) struct pci_dev *pdev)
+{
+ return -ENOSYS;
+}
+
+static struct pci_driver hpsa_pci_driver = {
+ .name = "hpsa",
+ .probe = hpsa_init_one,
+ .remove = __devexit_p(hpsa_remove_one),
+ .id_table = hpsa_pci_device_id, /* id_table */
+ .shutdown = hpsa_shutdown,
+ .suspend = hpsa_suspend,
+ .resume = hpsa_resume,
+};
+
+/*
+ * This is it. Register the PCI driver information for the cards we control
+ * the OS will call our registered routines when it finds one of our cards.
+ */
+static int __init hpsa_init(void)
+{
+ int err;
+ /* Start the scan thread */
+ hpsa_scan_thread = kthread_run(hpsa_scan_func, NULL, "hpsa_scan");
+ if (IS_ERR(hpsa_scan_thread)) {
+ err = PTR_ERR(hpsa_scan_thread);
+ return -ENODEV;
+ }
+ err = pci_register_driver(&hpsa_pci_driver);
+ if (err)
+ kthread_stop(hpsa_scan_thread);
+ return err;
+}
+
+static void __exit hpsa_cleanup(void)
+{
+ pci_unregister_driver(&hpsa_pci_driver);
+ kthread_stop(hpsa_scan_thread);
+}
+
+module_init(hpsa_init);
+module_exit(hpsa_cleanup);
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
new file mode 100644
index 00000000000..6bd1949144b
--- /dev/null
+++ b/drivers/scsi/hpsa.h
@@ -0,0 +1,273 @@
+/*
+ * Disk Array driver for HP Smart Array SAS controllers
+ * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Questions/Comments/Bugfixes to iss_storagedev@hp.com
+ *
+ */
+#ifndef HPSA_H
+#define HPSA_H
+
+#include <scsi/scsicam.h>
+
+#define IO_OK 0
+#define IO_ERROR 1
+
+struct ctlr_info;
+
+struct access_method {
+ void (*submit_command)(struct ctlr_info *h,
+ struct CommandList *c);
+ void (*set_intr_mask)(struct ctlr_info *h, unsigned long val);
+ unsigned long (*fifo_full)(struct ctlr_info *h);
+ unsigned long (*intr_pending)(struct ctlr_info *h);
+ unsigned long (*command_completed)(struct ctlr_info *h);
+};
+
+struct hpsa_scsi_dev_t {
+ int devtype;
+ int bus, target, lun; /* as presented to the OS */
+ unsigned char scsi3addr[8]; /* as presented to the HW */
+#define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0"
+ unsigned char device_id[16]; /* from inquiry pg. 0x83 */
+ unsigned char vendor[8]; /* bytes 8-15 of inquiry data */
+ unsigned char model[16]; /* bytes 16-31 of inquiry data */
+ unsigned char revision[4]; /* bytes 32-35 of inquiry data */
+ unsigned char raid_level; /* from inquiry page 0xC1 */
+};
+
+struct ctlr_info {
+ int ctlr;
+ char devname[8];
+ char *product_name;
+ char firm_ver[4]; /* Firmware version */
+ struct pci_dev *pdev;
+ __u32 board_id;
+ void __iomem *vaddr;
+ unsigned long paddr;
+ int nr_cmds; /* Number of commands allowed on this controller */
+ struct CfgTable __iomem *cfgtable;
+ int interrupts_enabled;
+ int major;
+ int max_commands;
+ int commands_outstanding;
+ int max_outstanding; /* Debug */
+ int usage_count; /* number of opens all all minor devices */
+# define DOORBELL_INT 0
+# define PERF_MODE_INT 1
+# define SIMPLE_MODE_INT 2
+# define MEMQ_MODE_INT 3
+ unsigned int intr[4];
+ unsigned int msix_vector;
+ unsigned int msi_vector;
+ struct access_method access;
+
+ /* queue and queue Info */
+ struct hlist_head reqQ;
+ struct hlist_head cmpQ;
+ unsigned int Qdepth;
+ unsigned int maxQsinceinit;
+ unsigned int maxSG;
+ spinlock_t lock;
+
+ /* pointers to command and error info pool */
+ struct CommandList *cmd_pool;
+ dma_addr_t cmd_pool_dhandle;
+ struct ErrorInfo *errinfo_pool;
+ dma_addr_t errinfo_pool_dhandle;
+ unsigned long *cmd_pool_bits;
+ int nr_allocs;
+ int nr_frees;
+ int busy_initializing;
+ int busy_scanning;
+ struct mutex busy_shutting_down;
+ struct list_head scan_list;
+ struct completion scan_wait;
+
+ struct Scsi_Host *scsi_host;
+ spinlock_t devlock; /* to protect hba[ctlr]->dev[]; */
+ int ndevices; /* number of used elements in .dev[] array. */
+#define HPSA_MAX_SCSI_DEVS_PER_HBA 256
+ struct hpsa_scsi_dev_t *dev[HPSA_MAX_SCSI_DEVS_PER_HBA];
+};
+#define HPSA_ABORT_MSG 0
+#define HPSA_DEVICE_RESET_MSG 1
+#define HPSA_BUS_RESET_MSG 2
+#define HPSA_HOST_RESET_MSG 3
+#define HPSA_MSG_SEND_RETRY_LIMIT 10
+#define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS 1000
+
+/* Maximum time in seconds driver will wait for command completions
+ * when polling before giving up.
+ */
+#define HPSA_MAX_POLL_TIME_SECS (20)
+
+/* During SCSI error recovery, HPSA_TUR_RETRY_LIMIT defines
+ * how many times to retry TEST UNIT READY on a device
+ * while waiting for it to become ready before giving up.
+ * HPSA_MAX_WAIT_INTERVAL_SECS is the max wait interval
+ * between sending TURs while waiting for a device
+ * to become ready.
+ */
+#define HPSA_TUR_RETRY_LIMIT (20)
+#define HPSA_MAX_WAIT_INTERVAL_SECS (30)
+
+/* HPSA_BOARD_READY_WAIT_SECS is how long to wait for a board
+ * to become ready, in seconds, before giving up on it.
+ * HPSA_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait
+ * between polling the board to see if it is ready, in
+ * milliseconds. HPSA_BOARD_READY_POLL_INTERVAL and
+ * HPSA_BOARD_READY_ITERATIONS are derived from those.
+ */
+#define HPSA_BOARD_READY_WAIT_SECS (120)
+#define HPSA_BOARD_READY_POLL_INTERVAL_MSECS (100)
+#define HPSA_BOARD_READY_POLL_INTERVAL \
+ ((HPSA_BOARD_READY_POLL_INTERVAL_MSECS * HZ) / 1000)
+#define HPSA_BOARD_READY_ITERATIONS \
+ ((HPSA_BOARD_READY_WAIT_SECS * 1000) / \
+ HPSA_BOARD_READY_POLL_INTERVAL_MSECS)
+#define HPSA_POST_RESET_PAUSE_MSECS (3000)
+#define HPSA_POST_RESET_NOOP_RETRIES (12)
+
+/* Defining the diffent access_menthods */
+/*
+ * Memory mapped FIFO interface (SMART 53xx cards)
+ */
+#define SA5_DOORBELL 0x20
+#define SA5_REQUEST_PORT_OFFSET 0x40
+#define SA5_REPLY_INTR_MASK_OFFSET 0x34
+#define SA5_REPLY_PORT_OFFSET 0x44
+#define SA5_INTR_STATUS 0x30
+#define SA5_SCRATCHPAD_OFFSET 0xB0
+
+#define SA5_CTCFG_OFFSET 0xB4
+#define SA5_CTMEM_OFFSET 0xB8
+
+#define SA5_INTR_OFF 0x08
+#define SA5B_INTR_OFF 0x04
+#define SA5_INTR_PENDING 0x08
+#define SA5B_INTR_PENDING 0x04
+#define FIFO_EMPTY 0xffffffff
+#define HPSA_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */
+
+#define HPSA_ERROR_BIT 0x02
+#define HPSA_TAG_CONTAINS_INDEX(tag) ((tag) & 0x04)
+#define HPSA_TAG_TO_INDEX(tag) ((tag) >> 3)
+#define HPSA_TAG_DISCARD_ERROR_BITS(tag) ((tag) & ~3)
+
+#define HPSA_INTR_ON 1
+#define HPSA_INTR_OFF 0
+/*
+ Send the command to the hardware
+*/
+static void SA5_submit_command(struct ctlr_info *h,
+ struct CommandList *c)
+{
+#ifdef HPSA_DEBUG
+ printk(KERN_WARNING "hpsa: Sending %x - down to controller\n",
+ c->busaddr);
+#endif /* HPSA_DEBUG */
+ writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
+ h->commands_outstanding++;
+ if (h->commands_outstanding > h->max_outstanding)
+ h->max_outstanding = h->commands_outstanding;
+}
+
+/*
+ * This card is the opposite of the other cards.
+ * 0 turns interrupts on...
+ * 0x08 turns them off...
+ */
+static void SA5_intr_mask(struct ctlr_info *h, unsigned long val)
+{
+ if (val) { /* Turn interrupts on */
+ h->interrupts_enabled = 1;
+ writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ } else { /* Turn them off */
+ h->interrupts_enabled = 0;
+ writel(SA5_INTR_OFF,
+ h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ }
+}
+/*
+ * Returns true if fifo is full.
+ *
+ */
+static unsigned long SA5_fifo_full(struct ctlr_info *h)
+{
+ if (h->commands_outstanding >= h->max_commands)
+ return 1;
+ else
+ return 0;
+
+}
+/*
+ * returns value read from hardware.
+ * returns FIFO_EMPTY if there is nothing to read
+ */
+static unsigned long SA5_completed(struct ctlr_info *h)
+{
+ unsigned long register_value
+ = readl(h->vaddr + SA5_REPLY_PORT_OFFSET);
+
+ if (register_value != FIFO_EMPTY)
+ h->commands_outstanding--;
+
+#ifdef HPSA_DEBUG
+ if (register_value != FIFO_EMPTY)
+ printk(KERN_INFO "hpsa: Read %lx back from board\n",
+ register_value);
+ else
+ printk(KERN_INFO "hpsa: FIFO Empty read\n");
+#endif
+
+ return register_value;
+}
+/*
+ * Returns true if an interrupt is pending..
+ */
+static unsigned long SA5_intr_pending(struct ctlr_info *h)
+{
+ unsigned long register_value =
+ readl(h->vaddr + SA5_INTR_STATUS);
+#ifdef HPSA_DEBUG
+ printk(KERN_INFO "hpsa: intr_pending %lx\n", register_value);
+#endif /* HPSA_DEBUG */
+ if (register_value & SA5_INTR_PENDING)
+ return 1;
+ return 0 ;
+}
+
+
+static struct access_method SA5_access = {
+ SA5_submit_command,
+ SA5_intr_mask,
+ SA5_fifo_full,
+ SA5_intr_pending,
+ SA5_completed,
+};
+
+struct board_type {
+ __u32 board_id;
+ char *product_name;
+ struct access_method *access;
+};
+
+
+/* end of old hpsa_scsi.h file */
+
+#endif /* HPSA_H */
+
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
new file mode 100644
index 00000000000..12d71387ed9
--- /dev/null
+++ b/drivers/scsi/hpsa_cmd.h
@@ -0,0 +1,326 @@
+/*
+ * Disk Array driver for HP Smart Array SAS controllers
+ * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Questions/Comments/Bugfixes to iss_storagedev@hp.com
+ *
+ */
+#ifndef HPSA_CMD_H
+#define HPSA_CMD_H
+
+/* general boundary defintions */
+#define SENSEINFOBYTES 32 /* may vary between hbas */
+#define MAXSGENTRIES 31
+#define MAXREPLYQS 256
+
+/* Command Status value */
+#define CMD_SUCCESS 0x0000
+#define CMD_TARGET_STATUS 0x0001
+#define CMD_DATA_UNDERRUN 0x0002
+#define CMD_DATA_OVERRUN 0x0003
+#define CMD_INVALID 0x0004
+#define CMD_PROTOCOL_ERR 0x0005
+#define CMD_HARDWARE_ERR 0x0006
+#define CMD_CONNECTION_LOST 0x0007
+#define CMD_ABORTED 0x0008
+#define CMD_ABORT_FAILED 0x0009
+#define CMD_UNSOLICITED_ABORT 0x000A
+#define CMD_TIMEOUT 0x000B
+#define CMD_UNABORTABLE 0x000C
+
+/* Unit Attentions ASC's as defined for the MSA2012sa */
+#define POWER_OR_RESET 0x29
+#define STATE_CHANGED 0x2a
+#define UNIT_ATTENTION_CLEARED 0x2f
+#define LUN_FAILED 0x3e
+#define REPORT_LUNS_CHANGED 0x3f
+
+/* Unit Attentions ASCQ's as defined for the MSA2012sa */
+
+ /* These ASCQ's defined for ASC = POWER_OR_RESET */
+#define POWER_ON_RESET 0x00
+#define POWER_ON_REBOOT 0x01
+#define SCSI_BUS_RESET 0x02
+#define MSA_TARGET_RESET 0x03
+#define CONTROLLER_FAILOVER 0x04
+#define TRANSCEIVER_SE 0x05
+#define TRANSCEIVER_LVD 0x06
+
+ /* These ASCQ's defined for ASC = STATE_CHANGED */
+#define RESERVATION_PREEMPTED 0x03
+#define ASYM_ACCESS_CHANGED 0x06
+#define LUN_CAPACITY_CHANGED 0x09
+
+/* transfer direction */
+#define XFER_NONE 0x00
+#define XFER_WRITE 0x01
+#define XFER_READ 0x02
+#define XFER_RSVD 0x03
+
+/* task attribute */
+#define ATTR_UNTAGGED 0x00
+#define ATTR_SIMPLE 0x04
+#define ATTR_HEADOFQUEUE 0x05
+#define ATTR_ORDERED 0x06
+#define ATTR_ACA 0x07
+
+/* cdb type */
+#define TYPE_CMD 0x00
+#define TYPE_MSG 0x01
+
+/* config space register offsets */
+#define CFG_VENDORID 0x00
+#define CFG_DEVICEID 0x02
+#define CFG_I2OBAR 0x10
+#define CFG_MEM1BAR 0x14
+
+/* i2o space register offsets */
+#define I2O_IBDB_SET 0x20
+#define I2O_IBDB_CLEAR 0x70
+#define I2O_INT_STATUS 0x30
+#define I2O_INT_MASK 0x34
+#define I2O_IBPOST_Q 0x40
+#define I2O_OBPOST_Q 0x44
+#define I2O_DMA1_CFG 0x214
+
+/* Configuration Table */
+#define CFGTBL_ChangeReq 0x00000001l
+#define CFGTBL_AccCmds 0x00000001l
+
+#define CFGTBL_Trans_Simple 0x00000002l
+
+#define CFGTBL_BusType_Ultra2 0x00000001l
+#define CFGTBL_BusType_Ultra3 0x00000002l
+#define CFGTBL_BusType_Fibre1G 0x00000100l
+#define CFGTBL_BusType_Fibre2G 0x00000200l
+struct vals32 {
+ __u32 lower;
+ __u32 upper;
+};
+
+union u64bit {
+ struct vals32 val32;
+ __u64 val;
+};
+
+/* FIXME this is a per controller value (barf!) */
+#define HPSA_MAX_TARGETS_PER_CTLR 16
+#define HPSA_MAX_LUN 256
+#define HPSA_MAX_PHYS_LUN 1024
+
+/* SCSI-3 Commands */
+#pragma pack(1)
+
+#define HPSA_INQUIRY 0x12
+struct InquiryData {
+ __u8 data_byte[36];
+};
+
+#define HPSA_REPORT_LOG 0xc2 /* Report Logical LUNs */
+#define HPSA_REPORT_PHYS 0xc3 /* Report Physical LUNs */
+struct ReportLUNdata {
+ __u8 LUNListLength[4];
+ __u32 reserved;
+ __u8 LUN[HPSA_MAX_LUN][8];
+};
+
+struct ReportExtendedLUNdata {
+ __u8 LUNListLength[4];
+ __u8 extended_response_flag;
+ __u8 reserved[3];
+ __u8 LUN[HPSA_MAX_LUN][24];
+};
+
+struct SenseSubsystem_info {
+ __u8 reserved[36];
+ __u8 portname[8];
+ __u8 reserved1[1108];
+};
+
+#define HPSA_READ_CAPACITY 0x25 /* Read Capacity */
+struct ReadCapdata {
+ __u8 total_size[4]; /* Total size in blocks */
+ __u8 block_size[4]; /* Size of blocks in bytes */
+};
+
+#if 0
+/* 12 byte commands not implemented in firmware yet. */
+#define HPSA_READ 0xa8
+#define HPSA_WRITE 0xaa
+#endif
+
+#define HPSA_READ 0x28 /* Read(10) */
+#define HPSA_WRITE 0x2a /* Write(10) */
+
+/* BMIC commands */
+#define BMIC_READ 0x26
+#define BMIC_WRITE 0x27
+#define BMIC_CACHE_FLUSH 0xc2
+#define HPSA_CACHE_FLUSH 0x01 /* C2 was already being used by HPSA */
+
+/* Command List Structure */
+union SCSI3Addr {
+ struct {
+ __u8 Dev;
+ __u8 Bus:6;
+ __u8 Mode:2; /* b00 */
+ } PeripDev;
+ struct {
+ __u8 DevLSB;
+ __u8 DevMSB:6;
+ __u8 Mode:2; /* b01 */
+ } LogDev;
+ struct {
+ __u8 Dev:5;
+ __u8 Bus:3;
+ __u8 Targ:6;
+ __u8 Mode:2; /* b10 */
+ } LogUnit;
+};
+
+struct PhysDevAddr {
+ __u32 TargetId:24;
+ __u32 Bus:6;
+ __u32 Mode:2;
+ /* 2 level target device addr */
+ union SCSI3Addr Target[2];
+};
+
+struct LogDevAddr {
+ __u32 VolId:30;
+ __u32 Mode:2;
+ __u8 reserved[4];
+};
+
+union LUNAddr {
+ __u8 LunAddrBytes[8];
+ union SCSI3Addr SCSI3Lun[4];
+ struct PhysDevAddr PhysDev;
+ struct LogDevAddr LogDev;
+};
+
+struct CommandListHeader {
+ __u8 ReplyQueue;
+ __u8 SGList;
+ __u16 SGTotal;
+ struct vals32 Tag;
+ union LUNAddr LUN;
+};
+
+struct RequestBlock {
+ __u8 CDBLen;
+ struct {
+ __u8 Type:3;
+ __u8 Attribute:3;
+ __u8 Direction:2;
+ } Type;
+ __u16 Timeout;
+ __u8 CDB[16];
+};
+
+struct ErrDescriptor {
+ struct vals32 Addr;
+ __u32 Len;
+};
+
+struct SGDescriptor {
+ struct vals32 Addr;
+ __u32 Len;
+ __u32 Ext;
+};
+
+union MoreErrInfo {
+ struct {
+ __u8 Reserved[3];
+ __u8 Type;
+ __u32 ErrorInfo;
+ } Common_Info;
+ struct {
+ __u8 Reserved[2];
+ __u8 offense_size; /* size of offending entry */
+ __u8 offense_num; /* byte # of offense 0-base */
+ __u32 offense_value;
+ } Invalid_Cmd;
+};
+struct ErrorInfo {
+ __u8 ScsiStatus;
+ __u8 SenseLen;
+ __u16 CommandStatus;
+ __u32 ResidualCnt;
+ union MoreErrInfo MoreErrInfo;
+ __u8 SenseInfo[SENSEINFOBYTES];
+};
+/* Command types */
+#define CMD_IOCTL_PEND 0x01
+#define CMD_SCSI 0x03
+
+struct ctlr_info; /* defined in hpsa.h */
+/* The size of this structure needs to be divisible by 8
+ * od on all architectures, because the controller uses 2
+ * lower bits of the address, and the driver uses 1 lower
+ * bit (3 bits total.)
+ */
+struct CommandList {
+ struct CommandListHeader Header;
+ struct RequestBlock Request;
+ struct ErrDescriptor ErrDesc;
+ struct SGDescriptor SG[MAXSGENTRIES];
+ /* information associated with the command */
+ __u32 busaddr; /* physical addr of this record */
+ struct ErrorInfo *err_info; /* pointer to the allocated mem */
+ struct ctlr_info *h;
+ int cmd_type;
+ long cmdindex;
+ struct hlist_node list;
+ struct CommandList *prev;
+ struct CommandList *next;
+ struct request *rq;
+ struct completion *waiting;
+ int retry_count;
+ void *scsi_cmd;
+};
+
+/* Configuration Table Structure */
+struct HostWrite {
+ __u32 TransportRequest;
+ __u32 Reserved;
+ __u32 CoalIntDelay;
+ __u32 CoalIntCount;
+};
+
+struct CfgTable {
+ __u8 Signature[4];
+ __u32 SpecValence;
+ __u32 TransportSupport;
+ __u32 TransportActive;
+ struct HostWrite HostWrite;
+ __u32 CmdsOutMax;
+ __u32 BusTypes;
+ __u32 Reserved;
+ __u8 ServerName[16];
+ __u32 HeartBeat;
+ __u32 SCSI_Prefetch;
+};
+
+struct hpsa_pci_info {
+ unsigned char bus;
+ unsigned char dev_fn;
+ unsigned short domain;
+ __u32 board_id;
+};
+
+#pragma pack()
+#endif /* HPSA_CMD_H */
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 8643f508936..9e52d16c7c3 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -6521,6 +6521,7 @@ static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
int rc;
ENTER;
+ ioa_cfg->pdev->state_saved = true;
rc = pci_restore_state(ioa_cfg->pdev);
if (rc != PCIBIOS_SUCCESSFUL) {
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index c4b58d042f6..881d5dfe8c7 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -68,18 +68,20 @@ struct kmem_cache *scsi_pkt_cachep;
/**
* struct fc_fcp_internal - FCP layer internal data
- * @scsi_pkt_pool: Memory pool to draw FCP packets from
+ * @scsi_pkt_pool: Memory pool to draw FCP packets from
+ * @scsi_queue_lock: Protects the scsi_pkt_queue
* @scsi_pkt_queue: Current FCP packets
* @last_can_queue_ramp_down_time: ramp down time
* @last_can_queue_ramp_up_time: ramp up time
* @max_can_queue: max can_queue size
*/
struct fc_fcp_internal {
- mempool_t *scsi_pkt_pool;
- struct list_head scsi_pkt_queue;
- unsigned long last_can_queue_ramp_down_time;
- unsigned long last_can_queue_ramp_up_time;
- int max_can_queue;
+ mempool_t *scsi_pkt_pool;
+ spinlock_t scsi_queue_lock;
+ struct list_head scsi_pkt_queue;
+ unsigned long last_can_queue_ramp_down_time;
+ unsigned long last_can_queue_ramp_up_time;
+ int max_can_queue;
};
#define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv)
@@ -410,12 +412,14 @@ static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
unsigned long flags;
fp = fc_frame_alloc(lport, len);
- if (!fp) {
- spin_lock_irqsave(lport->host->host_lock, flags);
- fc_fcp_can_queue_ramp_down(lport);
- spin_unlock_irqrestore(lport->host->host_lock, flags);
- }
- return fp;
+ if (likely(fp))
+ return fp;
+
+ /* error case */
+ spin_lock_irqsave(lport->host->host_lock, flags);
+ fc_fcp_can_queue_ramp_down(lport);
+ spin_unlock_irqrestore(lport->host->host_lock, flags);
+ return NULL;
}
/**
@@ -990,7 +994,7 @@ static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
struct scsi_cmnd *sc_cmd;
unsigned long flags;
- spin_lock_irqsave(lport->host->host_lock, flags);
+ spin_lock_irqsave(&si->scsi_queue_lock, flags);
restart:
list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
sc_cmd = fsp->cmd;
@@ -1001,7 +1005,7 @@ restart:
continue;
fc_fcp_pkt_hold(fsp);
- spin_unlock_irqrestore(lport->host->host_lock, flags);
+ spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
if (!fc_fcp_lock_pkt(fsp)) {
fc_fcp_cleanup_cmd(fsp, error);
@@ -1010,14 +1014,14 @@ restart:
}
fc_fcp_pkt_release(fsp);
- spin_lock_irqsave(lport->host->host_lock, flags);
+ spin_lock_irqsave(&si->scsi_queue_lock, flags);
/*
* while we dropped the lock multiple pkts could
* have been released, so we have to start over.
*/
goto restart;
}
- spin_unlock_irqrestore(lport->host->host_lock, flags);
+ spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
}
/**
@@ -1035,11 +1039,12 @@ static void fc_fcp_abort_io(struct fc_lport *lport)
* @fsp: The FCP packet to send
*
* Return: Zero for success and -1 for failure
- * Locks: Called with the host lock and irqs disabled.
+ * Locks: Called without locks held
*/
static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
{
struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
+ unsigned long flags;
int rc;
fsp->cmd->SCp.ptr = (char *)fsp;
@@ -1049,13 +1054,16 @@ static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
int_to_scsilun(fsp->cmd->device->lun,
(struct scsi_lun *)fsp->cdb_cmd.fc_lun);
memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
- list_add_tail(&fsp->list, &si->scsi_pkt_queue);
- spin_unlock_irq(lport->host->host_lock);
+ spin_lock_irqsave(&si->scsi_queue_lock, flags);
+ list_add_tail(&fsp->list, &si->scsi_pkt_queue);
+ spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
- spin_lock_irq(lport->host->host_lock);
- if (rc)
+ if (unlikely(rc)) {
+ spin_lock_irqsave(&si->scsi_queue_lock, flags);
list_del(&fsp->list);
+ spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
+ }
return rc;
}
@@ -1752,6 +1760,7 @@ int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *))
struct fcoe_dev_stats *stats;
lport = shost_priv(sc_cmd->device->host);
+ spin_unlock_irq(lport->host->host_lock);
rval = fc_remote_port_chkready(rport);
if (rval) {
@@ -1834,6 +1843,7 @@ int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *))
rc = SCSI_MLQUEUE_HOST_BUSY;
}
out:
+ spin_lock_irq(lport->host->host_lock);
return rc;
}
EXPORT_SYMBOL(fc_queuecommand);
@@ -1864,11 +1874,8 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp)
lport = fsp->lp;
si = fc_get_scsi_internal(lport);
- spin_lock_irqsave(lport->host->host_lock, flags);
- if (!fsp->cmd) {
- spin_unlock_irqrestore(lport->host->host_lock, flags);
+ if (!fsp->cmd)
return;
- }
/*
* if can_queue ramp down is done then try can_queue ramp up
@@ -1880,10 +1887,8 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp)
sc_cmd = fsp->cmd;
fsp->cmd = NULL;
- if (!sc_cmd->SCp.ptr) {
- spin_unlock_irqrestore(lport->host->host_lock, flags);
+ if (!sc_cmd->SCp.ptr)
return;
- }
CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
switch (fsp->status_code) {
@@ -1945,10 +1950,11 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp)
break;
}
+ spin_lock_irqsave(&si->scsi_queue_lock, flags);
list_del(&fsp->list);
+ spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
sc_cmd->SCp.ptr = NULL;
sc_cmd->scsi_done(sc_cmd);
- spin_unlock_irqrestore(lport->host->host_lock, flags);
/* release ref from initial allocation in queue command */
fc_fcp_pkt_release(fsp);
@@ -2216,6 +2222,7 @@ int fc_fcp_init(struct fc_lport *lport)
lport->scsi_priv = si;
si->max_can_queue = lport->host->can_queue;
INIT_LIST_HEAD(&si->scsi_pkt_queue);
+ spin_lock_init(&si->scsi_queue_lock);
si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
if (!si->scsi_pkt_pool) {
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 74338c83ad0..0b165024a21 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -537,7 +537,9 @@ int fc_fabric_login(struct fc_lport *lport)
int rc = -1;
mutex_lock(&lport->lp_mutex);
- if (lport->state == LPORT_ST_DISABLED) {
+ if (lport->state == LPORT_ST_DISABLED ||
+ lport->state == LPORT_ST_LOGO) {
+ fc_lport_state_enter(lport, LPORT_ST_RESET);
fc_lport_enter_reset(lport);
rc = 0;
}
@@ -967,6 +969,9 @@ static void fc_lport_enter_reset(struct fc_lport *lport)
FC_LPORT_DBG(lport, "Entered RESET state from %s state\n",
fc_lport_state(lport));
+ if (lport->state == LPORT_ST_DISABLED || lport->state == LPORT_ST_LOGO)
+ return;
+
if (lport->vport) {
if (lport->link_up)
fc_vport_set_state(lport->vport, FC_VPORT_INITIALIZING);
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 35ca0e72df4..02300523b23 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -310,6 +310,7 @@ static void fc_rport_work(struct work_struct *work)
restart = 1;
else
list_del(&rdata->peers);
+ rdata->event = RPORT_EV_NONE;
mutex_unlock(&rdata->rp_mutex);
mutex_unlock(&lport->disc.disc_mutex);
}
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 226920d15ea..d4da6bdd0e7 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -4506,9 +4506,13 @@ lpfc_sli_pci_mem_setup(struct lpfc_hba *phba)
pdev = phba->pcidev;
/* Set the device DMA mask size */
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0
+ || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0
+ || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) {
return error;
+ }
+ }
/* Get the bus address of Bar0 and Bar2 and the number of bytes
* required by each mapping.
@@ -6021,9 +6025,13 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
pdev = phba->pcidev;
/* Set the device DMA mask size */
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0
+ || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0
+ || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) {
return error;
+ }
+ }
/* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
* number of bytes required by each mapping. They are actually
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 134c63ef6d3..99ff99e45be 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -2501,7 +2501,9 @@ static int megasas_init_mfi(struct megasas_instance *instance)
instance->base_addr = pci_resource_start(instance->pdev, 0);
}
- if (pci_request_regions(instance->pdev, "megasas: LSI")) {
+ if (pci_request_selected_regions(instance->pdev,
+ pci_select_bars(instance->pdev, IORESOURCE_MEM),
+ "megasas: LSI")) {
printk(KERN_DEBUG "megasas: IO memory region busy!\n");
return -EBUSY;
}
@@ -2642,7 +2644,8 @@ static int megasas_init_mfi(struct megasas_instance *instance)
iounmap(instance->reg_set);
fail_ioremap:
- pci_release_regions(instance->pdev);
+ pci_release_selected_regions(instance->pdev,
+ pci_select_bars(instance->pdev, IORESOURCE_MEM));
return -EINVAL;
}
@@ -2662,7 +2665,8 @@ static void megasas_release_mfi(struct megasas_instance *instance)
iounmap(instance->reg_set);
- pci_release_regions(instance->pdev);
+ pci_release_selected_regions(instance->pdev,
+ pci_select_bars(instance->pdev, IORESOURCE_MEM));
}
/**
@@ -2971,7 +2975,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
/*
* PCI prepping: enable device set bus mastering and dma mask
*/
- rval = pci_enable_device(pdev);
+ rval = pci_enable_device_mem(pdev);
if (rval) {
return rval;
@@ -3276,7 +3280,7 @@ megasas_resume(struct pci_dev *pdev)
/*
* PCI prepping: enable device set bus mastering and dma mask
*/
- rval = pci_enable_device(pdev);
+ rval = pci_enable_device_mem(pdev);
if (rval) {
printk(KERN_ERR "megasas: Enable device failed\n");
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 6422e258fd5..89d02401b9e 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -3583,6 +3583,11 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
mutex_init(&ioc->transport_cmds.mutex);
+ /* scsih internal command bits */
+ ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
+ mutex_init(&ioc->scsih_cmds.mutex);
+
/* task management internal command bits */
ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index c790d45876c..cae6b2cf492 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -657,6 +657,7 @@ static struct pci_device_id __devinitdata mvs_pci_table[] = {
{ PCI_VDEVICE(MARVELL, 0x9180), chip_9180 },
{ PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1300), chip_1300 },
{ PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1320), chip_1320 },
+ { PCI_VDEVICE(ADAPTEC2, 0x0450), chip_6440 },
{ } /* terminate list */
};
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 950202a70bc..24223473f57 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -432,30 +432,23 @@ static void _osd_free_seg(struct osd_request *or __unused,
seg->alloc_size = 0;
}
-static void _put_request(struct request *rq , bool is_async)
+static void _put_request(struct request *rq)
{
- if (is_async) {
- WARN_ON(rq->bio);
- __blk_put_request(rq->q, rq);
- } else {
- /*
- * If osd_finalize_request() was called but the request was not
- * executed through the block layer, then we must release BIOs.
- * TODO: Keep error code in or->async_error. Need to audit all
- * code paths.
- */
- if (unlikely(rq->bio))
- blk_end_request(rq, -ENOMEM, blk_rq_bytes(rq));
- else
- blk_put_request(rq);
- }
+ /*
+ * If osd_finalize_request() was called but the request was not
+ * executed through the block layer, then we must release BIOs.
+ * TODO: Keep error code in or->async_error. Need to audit all
+ * code paths.
+ */
+ if (unlikely(rq->bio))
+ blk_end_request(rq, -ENOMEM, blk_rq_bytes(rq));
+ else
+ blk_put_request(rq);
}
void osd_end_request(struct osd_request *or)
{
struct request *rq = or->request;
- /* IMPORTANT: make sure this agrees with osd_execute_request_async */
- bool is_async = (or->request->end_io_data == or);
_osd_free_seg(or, &or->set_attr);
_osd_free_seg(or, &or->enc_get_attr);
@@ -463,20 +456,34 @@ void osd_end_request(struct osd_request *or)
if (rq) {
if (rq->next_rq) {
- _put_request(rq->next_rq, is_async);
+ _put_request(rq->next_rq);
rq->next_rq = NULL;
}
- _put_request(rq, is_async);
+ _put_request(rq);
}
_osd_request_free(or);
}
EXPORT_SYMBOL(osd_end_request);
+static void _set_error_resid(struct osd_request *or, struct request *req,
+ int error)
+{
+ or->async_error = error;
+ or->req_errors = req->errors ? : error;
+ or->sense_len = req->sense_len;
+ if (or->out.req)
+ or->out.residual = or->out.req->resid_len;
+ if (or->in.req)
+ or->in.residual = or->in.req->resid_len;
+}
+
int osd_execute_request(struct osd_request *or)
{
- return or->async_error =
- blk_execute_rq(or->request->q, NULL, or->request, 0);
+ int error = blk_execute_rq(or->request->q, NULL, or->request, 0);
+
+ _set_error_resid(or, or->request, error);
+ return error;
}
EXPORT_SYMBOL(osd_execute_request);
@@ -484,15 +491,17 @@ static void osd_request_async_done(struct request *req, int error)
{
struct osd_request *or = req->end_io_data;
- or->async_error = error;
-
- if (unlikely(error)) {
- OSD_DEBUG("osd_request_async_done error recieved %d "
- "errors 0x%x\n", error, req->errors);
- if (!req->errors) /* don't miss out on this one */
- req->errors = error;
+ _set_error_resid(or, req, error);
+ if (req->next_rq) {
+ __blk_put_request(req->q, req->next_rq);
+ req->next_rq = NULL;
}
+ __blk_put_request(req->q, req);
+ or->request = NULL;
+ or->in.req = NULL;
+ or->out.req = NULL;
+
if (or->async_done)
or->async_done(or, or->async_private);
else
@@ -1489,21 +1498,18 @@ int osd_req_decode_sense_full(struct osd_request *or,
#endif
int ret;
- if (likely(!or->request->errors)) {
- osi->out_resid = 0;
- osi->in_resid = 0;
+ if (likely(!or->req_errors))
return 0;
- }
osi = osi ? : &local_osi;
memset(osi, 0, sizeof(*osi));
- ssdb = or->request->sense;
- sense_len = or->request->sense_len;
+ ssdb = (typeof(ssdb))or->sense;
+ sense_len = or->sense_len;
if ((sense_len < (int)sizeof(*ssdb) || !ssdb->sense_key)) {
OSD_ERR("Block-layer returned error(0x%x) but "
"sense_len(%u) || key(%d) is empty\n",
- or->request->errors, sense_len, ssdb->sense_key);
+ or->req_errors, sense_len, ssdb->sense_key);
goto analyze;
}
@@ -1525,7 +1531,7 @@ int osd_req_decode_sense_full(struct osd_request *or,
"additional_code=0x%x async_error=%d errors=0x%x\n",
osi->key, original_sense_len, sense_len,
osi->additional_code, or->async_error,
- or->request->errors);
+ or->req_errors);
if (original_sense_len < sense_len)
sense_len = original_sense_len;
@@ -1695,10 +1701,10 @@ analyze:
ret = -EIO;
}
- if (or->out.req)
- osi->out_resid = or->out.req->resid_len ?: or->out.total_bytes;
- if (or->in.req)
- osi->in_resid = or->in.req->resid_len ?: or->in.total_bytes;
+ if (!or->out.residual)
+ or->out.residual = or->out.total_bytes;
+ if (!or->in.residual)
+ or->in.residual = or->in.total_bytes;
return ret;
}
diff --git a/drivers/scsi/pm8001/pm8001_ctl.h b/drivers/scsi/pm8001/pm8001_ctl.h
index 22644de2639..63ad4aa0c42 100644
--- a/drivers/scsi/pm8001/pm8001_ctl.h
+++ b/drivers/scsi/pm8001/pm8001_ctl.h
@@ -45,16 +45,6 @@
#define HEADER_LEN 28
#define SIZE_OFFSET 16
-struct pm8001_ioctl_payload {
- u32 signature;
- u16 major_function;
- u16 minor_function;
- u16 length;
- u16 status;
- u16 offset;
- u16 id;
- u8 func_specific[1];
-};
#define FLASH_OK 0x000000
#define FAIL_OPEN_BIOS_FILE 0x000100
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index a3de306b904..9b44c6f1b10 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -373,10 +373,7 @@ static int bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
static void __devinit
mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit)
{
- u32 offset;
- u32 value;
- u32 i, j;
- u32 bit_cnt;
+ u32 value, offset, i;
#define SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR 0x00030000
#define SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR 0x00040000
@@ -392,55 +389,35 @@ mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit)
*/
if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR))
return;
- /* set SSC bit of PHY 0 - 3 */
+
for (i = 0; i < 4; i++) {
offset = SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET + 0x4000 * i;
- value = pm8001_cr32(pm8001_ha, 2, offset);
- if (SSCbit) {
- value |= 0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT;
- value &= ~(0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT);
- } else {
- value |= 0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT;
- value &= ~(0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT);
- }
- bit_cnt = 0;
- for (j = 0; j < 31; j++)
- if ((value >> j) & 0x00000001)
- bit_cnt++;
- if (bit_cnt % 2)
- value &= ~(0x00000001 << SNW3_PHY_CAPABILITIES_PARITY);
- else
- value |= 0x00000001 << SNW3_PHY_CAPABILITIES_PARITY;
-
- pm8001_cw32(pm8001_ha, 2, offset, value);
+ pm8001_cw32(pm8001_ha, 2, offset, 0x80001501);
}
-
/* shift membase 3 for SAS2_SETTINGS_LOCAL_PHY 4 - 7 */
if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR))
return;
-
- /* set SSC bit of PHY 4 - 7 */
for (i = 4; i < 8; i++) {
offset = SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET + 0x4000 * (i-4);
- value = pm8001_cr32(pm8001_ha, 2, offset);
- if (SSCbit) {
- value |= 0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT;
- value &= ~(0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT);
- } else {
- value |= 0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT;
- value &= ~(0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT);
- }
- bit_cnt = 0;
- for (j = 0; j < 31; j++)
- if ((value >> j) & 0x00000001)
- bit_cnt++;
- if (bit_cnt % 2)
- value &= ~(0x00000001 << SNW3_PHY_CAPABILITIES_PARITY);
- else
- value |= 0x00000001 << SNW3_PHY_CAPABILITIES_PARITY;
-
- pm8001_cw32(pm8001_ha, 2, offset, value);
+ pm8001_cw32(pm8001_ha, 2, offset, 0x80001501);
}
+ /*************************************************************
+ Change the SSC upspreading value to 0x0 so that upspreading is disabled.
+ Device MABC SMOD0 Controls
+ Address: (via MEMBASE-III):
+ Using shifted destination address 0x0_0000: with Offset 0xD8
+
+ 31:28 R/W Reserved Do not change
+ 27:24 R/W SAS_SMOD_SPRDUP 0000
+ 23:20 R/W SAS_SMOD_SPRDDN 0000
+ 19:0 R/W Reserved Do not change
+ Upon power-up this register will read as 0x8990c016,
+ and I would like you to change the SAS_SMOD_SPRDUP bits to 0b0000
+ so that the written value will be 0x8090c016.
+ This will ensure only down-spreading SSC is enabled on the SPC.
+ *************************************************************/
+ value = pm8001_cr32(pm8001_ha, 2, 0xd8);
+ pm8001_cw32(pm8001_ha, 2, 0xd8, 0x8000C016);
/*set the shifted destination address to 0x0 to avoid error operation */
bar4_shift(pm8001_ha, 0x0);
@@ -1901,7 +1878,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
struct sas_task *t;
struct pm8001_ccb_info *ccb;
- unsigned long flags;
+ unsigned long flags = 0;
u32 param;
u32 status;
u32 tag;
@@ -2040,7 +2017,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->stat = SAS_QUEUE_FULL;
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
mb();/*in order to force CPU ordering*/
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
t->task_done(t);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
return;
}
break;
@@ -2058,7 +2037,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->stat = SAS_QUEUE_FULL;
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
mb();/*ditto*/
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
t->task_done(t);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
return;
}
break;
@@ -2084,7 +2065,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->stat = SAS_QUEUE_FULL;
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
mb();/* ditto*/
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
t->task_done(t);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
return;
}
break;
@@ -2149,7 +2132,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->stat = SAS_QUEUE_FULL;
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
mb();/*ditto*/
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
t->task_done(t);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
return;
}
break;
@@ -2171,7 +2156,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->stat = SAS_QUEUE_FULL;
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
mb();/*ditto*/
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
t->task_done(t);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
return;
}
break;
@@ -2200,11 +2187,20 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
" resp 0x%x stat 0x%x but aborted by upper layer!\n",
t, status, ts->resp, ts->stat));
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
- } else {
+ } else if (t->uldd_task) {
spin_unlock_irqrestore(&t->task_state_lock, flags);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
mb();/* ditto */
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
t->task_done(t);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ } else if (!t->uldd_task) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/*ditto*/
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ t->task_done(t);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
}
}
@@ -2212,7 +2208,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
{
struct sas_task *t;
- unsigned long flags;
+ unsigned long flags = 0;
struct task_status_struct *ts;
struct pm8001_ccb_info *ccb;
struct pm8001_device *pm8001_dev;
@@ -2292,7 +2288,9 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->stat = SAS_QUEUE_FULL;
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
mb();/*ditto*/
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
t->task_done(t);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
return;
}
break;
@@ -2401,11 +2399,20 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
" resp 0x%x stat 0x%x but aborted by upper layer!\n",
t, event, ts->resp, ts->stat));
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
- } else {
+ } else if (t->uldd_task) {
spin_unlock_irqrestore(&t->task_state_lock, flags);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
- mb();/* in order to force CPU ordering */
+ mb();/* ditto */
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
t->task_done(t);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ } else if (!t->uldd_task) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/*ditto*/
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ t->task_done(t);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
}
}
@@ -2876,15 +2883,20 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
u8 link_rate =
(u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28);
+ u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
u8 phy_id =
(u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+ u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate);
+ u8 portstate = (u8)(npip_portstate & 0x0000000F);
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
struct sas_ha_struct *sas_ha = pm8001_ha->sas;
struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
unsigned long flags;
u8 deviceType = pPayload->sas_identify.dev_type;
-
+ port->port_state = portstate;
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_SAS_PHY_UP \n"));
+ pm8001_printk("HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n",
+ port_id, phy_id));
switch (deviceType) {
case SAS_PHY_UNUSED:
@@ -2895,16 +2907,19 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n"));
pm8001_chip_phy_ctl_req(pm8001_ha, phy_id,
PHY_NOTIFY_ENABLE_SPINUP);
+ port->port_attached = 1;
get_lrate_mode(phy, link_rate);
break;
case SAS_EDGE_EXPANDER_DEVICE:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("expander device.\n"));
+ port->port_attached = 1;
get_lrate_mode(phy, link_rate);
break;
case SAS_FANOUT_EXPANDER_DEVICE:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("fanout expander device.\n"));
+ port->port_attached = 1;
get_lrate_mode(phy, link_rate);
break;
default:
@@ -2946,11 +2961,20 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
u8 link_rate =
(u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28);
+ u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
u8 phy_id =
(u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+ u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate);
+ u8 portstate = (u8)(npip_portstate & 0x0000000F);
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
struct sas_ha_struct *sas_ha = pm8001_ha->sas;
struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
unsigned long flags;
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_SATA_PHY_UP port id = %d,"
+ " phy id = %d\n", port_id, phy_id));
+ port->port_state = portstate;
+ port->port_attached = 1;
get_lrate_mode(phy, link_rate);
phy->phy_type |= PORT_TYPE_SATA;
phy->phy_attached = 1;
@@ -2984,7 +3008,13 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
(u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate);
u8 portstate = (u8)(npip_portstate & 0x0000000F);
-
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ port->port_state = portstate;
+ phy->phy_type = 0;
+ phy->identify.device_type = 0;
+ phy->phy_attached = 0;
+ memset(&phy->dev_sas_addr, 0, SAS_ADDR_SIZE);
switch (portstate) {
case PORT_VALID:
break;
@@ -2993,26 +3023,30 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_printk(" PortInvalid portID %d \n", port_id));
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk(" Last phy Down and port invalid\n"));
+ port->port_attached = 0;
pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
port_id, phy_id, 0, 0);
break;
case PORT_IN_RESET:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" PortInReset portID %d \n", port_id));
+ pm8001_printk(" Port In Reset portID %d \n", port_id));
break;
case PORT_NOT_ESTABLISHED:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk(" phy Down and PORT_NOT_ESTABLISHED\n"));
+ port->port_attached = 0;
break;
case PORT_LOSTCOMM:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk(" phy Down and PORT_LOSTCOMM\n"));
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk(" Last phy Down and port invalid\n"));
+ port->port_attached = 0;
pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
port_id, phy_id, 0, 0);
break;
default:
+ port->port_attached = 0;
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk(" phy Down and(default) = %x\n",
portstate));
@@ -3770,7 +3804,8 @@ static int pm8001_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
u32 opc = OPC_INB_SSPINIIOSTART;
memset(&ssp_cmd, 0, sizeof(ssp_cmd));
memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8);
- ssp_cmd.dir_m_tlr = data_dir_flags[task->data_dir] << 8 | 0x0;/*0 for
+ ssp_cmd.dir_m_tlr =
+ cpu_to_le32(data_dir_flags[task->data_dir] << 8 | 0x0);/*0 for
SAS 1.1 compatible TLR*/
ssp_cmd.data_len = cpu_to_le32(task->total_xfer_len);
ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id);
@@ -3841,7 +3876,7 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
}
}
if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag))
- ncg_tag = cpu_to_le32(hdr_tag);
+ ncg_tag = hdr_tag;
dir = data_dir_flags[task->data_dir] << 8;
sata_cmd.tag = cpu_to_le32(tag);
sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
@@ -3986,7 +4021,7 @@ static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
((stp_sspsmp_sata & 0x03) * 0x10000000));
payload.firstburstsize_ITNexustimeout =
cpu_to_le32(ITNT | (firstBurstSize * 0x10000));
- memcpy(&payload.sas_addr_hi, pm8001_dev->sas_device->sas_addr,
+ memcpy(payload.sas_addr, pm8001_dev->sas_device->sas_addr,
SAS_ADDR_SIZE);
rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
return rc;
@@ -4027,7 +4062,7 @@ static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
struct inbound_queue_table *circularQ;
int ret;
u32 opc = OPC_INB_LOCAL_PHY_CONTROL;
- memset((u8 *)&payload, 0, sizeof(payload));
+ memset(&payload, 0, sizeof(payload));
circularQ = &pm8001_ha->inbnd_q_tbl[0];
payload.tag = 1;
payload.phyop_phyid =
diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h
index 96e4daa68b8..833a5201eda 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.h
+++ b/drivers/scsi/pm8001/pm8001_hwi.h
@@ -242,8 +242,7 @@ struct reg_dev_req {
__le32 phyid_portid;
__le32 dtype_dlr_retry;
__le32 firstburstsize_ITNexustimeout;
- u32 sas_addr_hi;
- u32 sas_addr_low;
+ u8 sas_addr[SAS_ADDR_SIZE];
__le32 upper_device_id;
u32 reserved[8];
} __attribute__((packed, aligned(4)));
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 42ebe725d5a..c2f1032496c 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -200,8 +200,13 @@ static int __devinit pm8001_alloc(struct pm8001_hba_info *pm8001_ha)
{
int i;
spin_lock_init(&pm8001_ha->lock);
- for (i = 0; i < pm8001_ha->chip->n_phy; i++)
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
pm8001_phy_init(pm8001_ha, i);
+ pm8001_ha->port[i].wide_port_phymap = 0;
+ pm8001_ha->port[i].port_attached = 0;
+ pm8001_ha->port[i].port_state = 0;
+ INIT_LIST_HEAD(&pm8001_ha->port[i].list);
+ }
pm8001_ha->tags = kzalloc(PM8001_MAX_CCB, GFP_KERNEL);
if (!pm8001_ha->tags)
@@ -511,19 +516,23 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
u8 i;
#ifdef PM8001_READ_VPD
DECLARE_COMPLETION_ONSTACK(completion);
+ struct pm8001_ioctl_payload payload;
pm8001_ha->nvmd_completion = &completion;
- PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, 0, 0);
+ payload.minor_function = 0;
+ payload.length = 128;
+ payload.func_specific = kzalloc(128, GFP_KERNEL);
+ PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
wait_for_completion(&completion);
for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
memcpy(&pm8001_ha->phy[i].dev_sas_addr, pm8001_ha->sas_addr,
SAS_ADDR_SIZE);
PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("phy %d sas_addr = %x \n", i,
- (u64)pm8001_ha->phy[i].dev_sas_addr));
+ pm8001_printk("phy %d sas_addr = %016llx \n", i,
+ pm8001_ha->phy[i].dev_sas_addr));
}
#else
for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
- pm8001_ha->phy[i].dev_sas_addr = 0x500e004010000004ULL;
+ pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL;
pm8001_ha->phy[i].dev_sas_addr =
cpu_to_be64((u64)
(*(u64 *)&pm8001_ha->phy[i].dev_sas_addr));
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 1f767a0e727..7f9c83a7639 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -329,6 +329,23 @@ int pm8001_slave_configure(struct scsi_device *sdev)
}
return 0;
}
+ /* Find the local port id that's attached to this device */
+static int sas_find_local_port_id(struct domain_device *dev)
+{
+ struct domain_device *pdev = dev->parent;
+
+ /* Directly attached device */
+ if (!pdev)
+ return dev->port->id;
+ while (pdev) {
+ struct domain_device *pdev_p = pdev->parent;
+ if (!pdev_p)
+ return pdev->port->id;
+ pdev = pdev->parent;
+ }
+ return 0;
+}
+
/**
* pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware.
* @task: the task to be execute.
@@ -346,11 +363,12 @@ static int pm8001_task_exec(struct sas_task *task, const int num,
struct domain_device *dev = task->dev;
struct pm8001_hba_info *pm8001_ha;
struct pm8001_device *pm8001_dev;
+ struct pm8001_port *port = NULL;
struct sas_task *t = task;
struct pm8001_ccb_info *ccb;
u32 tag = 0xdeadbeef, rc, n_elem = 0;
u32 n = num;
- unsigned long flags = 0;
+ unsigned long flags = 0, flags_libsas = 0;
if (!dev->port) {
struct task_status_struct *tsm = &t->task_status;
@@ -379,6 +397,35 @@ static int pm8001_task_exec(struct sas_task *task, const int num,
rc = SAS_PHY_DOWN;
goto out_done;
}
+ port = &pm8001_ha->port[sas_find_local_port_id(dev)];
+ if (!port->port_attached) {
+ if (sas_protocol_ata(t->task_proto)) {
+ struct task_status_struct *ts = &t->task_status;
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ spin_unlock_irqrestore(dev->sata_dev.ap->lock,
+ flags_libsas);
+ t->task_done(t);
+ spin_lock_irqsave(dev->sata_dev.ap->lock,
+ flags_libsas);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ if (n > 1)
+ t = list_entry(t->list.next,
+ struct sas_task, list);
+ continue;
+ } else {
+ struct task_status_struct *ts = &t->task_status;
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ t->task_done(t);
+ if (n > 1)
+ t = list_entry(t->list.next,
+ struct sas_task, list);
+ continue;
+ }
+ }
rc = pm8001_tag_alloc(pm8001_ha, &tag);
if (rc)
goto err_out;
@@ -569,11 +616,11 @@ static int pm8001_dev_found_notify(struct domain_device *dev)
spin_lock_irqsave(&pm8001_ha->lock, flags);
pm8001_device = pm8001_alloc_dev(pm8001_ha);
- pm8001_device->sas_device = dev;
if (!pm8001_device) {
res = -1;
goto found_out;
}
+ pm8001_device->sas_device = dev;
dev->lldd_dev = pm8001_device;
pm8001_device->dev_type = dev->dev_type;
pm8001_device->dcompletion = &completion;
@@ -609,7 +656,7 @@ static int pm8001_dev_found_notify(struct domain_device *dev)
wait_for_completion(&completion);
if (dev->dev_type == SAS_END_DEV)
msleep(50);
- pm8001_ha->flags = PM8001F_RUN_TIME ;
+ pm8001_ha->flags |= PM8001F_RUN_TIME ;
return 0;
found_out:
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
@@ -772,7 +819,7 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
task->task_done = pm8001_task_done;
task->timer.data = (unsigned long)task;
task->timer.function = pm8001_tmf_timedout;
- task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
+ task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ;
add_timer(&task->timer);
res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
@@ -897,6 +944,8 @@ int pm8001_I_T_nexus_reset(struct domain_device *dev)
if (dev_is_sata(dev)) {
DECLARE_COMPLETION_ONSTACK(completion_setstate);
+ if (scsi_is_sas_phy_local(phy))
+ return 0;
rc = sas_phy_reset(phy, 1);
msleep(2000);
rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 30f2ede55a7..8e38ca8cd10 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -59,11 +59,11 @@
#define DRV_NAME "pm8001"
#define DRV_VERSION "0.1.36"
-#define PM8001_FAIL_LOGGING 0x01 /* libsas EH function logging */
+#define PM8001_FAIL_LOGGING 0x01 /* Error message logging */
#define PM8001_INIT_LOGGING 0x02 /* driver init logging */
#define PM8001_DISC_LOGGING 0x04 /* discovery layer logging */
#define PM8001_IO_LOGGING 0x08 /* I/O path logging */
-#define PM8001_EH_LOGGING 0x10 /* Error message logging */
+#define PM8001_EH_LOGGING 0x10 /* libsas EH function logging*/
#define PM8001_IOCTL_LOGGING 0x20 /* IOCTL message logging */
#define PM8001_MSG_LOGGING 0x40 /* misc message logging */
#define pm8001_printk(format, arg...) printk(KERN_INFO "%s %d:" format,\
@@ -100,6 +100,7 @@ do { \
#define PM8001_USE_TASKLET
#define PM8001_USE_MSIX
+#define PM8001_READ_VPD
#define DEV_IS_EXPANDER(type) ((type == EDGE_DEV) || (type == FANOUT_DEV))
@@ -111,7 +112,22 @@ extern const struct pm8001_dispatch pm8001_8001_dispatch;
struct pm8001_hba_info;
struct pm8001_ccb_info;
struct pm8001_device;
-struct pm8001_tmf_task;
+/* define task management IU */
+struct pm8001_tmf_task {
+ u8 tmf;
+ u32 tag_of_task_to_be_managed;
+};
+struct pm8001_ioctl_payload {
+ u32 signature;
+ u16 major_function;
+ u16 minor_function;
+ u16 length;
+ u16 status;
+ u16 offset;
+ u16 id;
+ u8 *func_specific;
+};
+
struct pm8001_dispatch {
char *name;
int (*chip_init)(struct pm8001_hba_info *pm8001_ha);
@@ -164,6 +180,10 @@ struct pm8001_chip_info {
struct pm8001_port {
struct asd_sas_port sas_port;
+ u8 port_attached;
+ u8 wide_port_phymap;
+ u8 port_state;
+ struct list_head list;
};
struct pm8001_phy {
@@ -386,11 +406,7 @@ struct pm8001_fw_image_header {
__be32 startup_entry;
} __attribute__((packed, aligned(4)));
-/* define task management IU */
-struct pm8001_tmf_task {
- u8 tmf;
- u32 tag_of_task_to_be_managed;
-};
+
/**
* FW Flash Update status values
*/
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index 34c6b896a91..e7d2688fbeb 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -1,7 +1,8 @@
/*
* pmcraid.c -- driver for PMC Sierra MaxRAID controller adapters
*
- * Written By: PMC Sierra Corporation
+ * Written By: Anil Ravindranath<anil_ravindranath@pmc-sierra.com>
+ * PMC-Sierra Inc
*
* Copyright (C) 2008, 2009 PMC Sierra Inc
*
@@ -79,7 +80,7 @@ DECLARE_BITMAP(pmcraid_minor, PMCRAID_MAX_ADAPTERS);
/*
* Module parameters
*/
-MODULE_AUTHOR("PMC Sierra Corporation, anil_ravindranath@pmc-sierra.com");
+MODULE_AUTHOR("Anil Ravindranath<anil_ravindranath@pmc-sierra.com>");
MODULE_DESCRIPTION("PMC Sierra MaxRAID Controller Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(PMCRAID_DRIVER_VERSION);
@@ -162,10 +163,10 @@ static int pmcraid_slave_alloc(struct scsi_device *scsi_dev)
spin_lock_irqsave(&pinstance->resource_lock, lock_flags);
list_for_each_entry(temp, &pinstance->used_res_q, queue) {
- /* do not expose VSETs with order-ids >= 240 */
+ /* do not expose VSETs with order-ids > MAX_VSET_TARGETS */
if (RES_IS_VSET(temp->cfg_entry)) {
target = temp->cfg_entry.unique_flags1;
- if (target >= PMCRAID_MAX_VSET_TARGETS)
+ if (target > PMCRAID_MAX_VSET_TARGETS)
continue;
bus = PMCRAID_VSET_BUS_ID;
lun = 0;
@@ -1210,7 +1211,7 @@ static int pmcraid_expose_resource(struct pmcraid_config_table_entry *cfgte)
int retval = 0;
if (cfgte->resource_type == RES_TYPE_VSET)
- retval = ((cfgte->unique_flags1 & 0xFF) < 0xFE);
+ retval = ((cfgte->unique_flags1 & 0x80) == 0);
else if (cfgte->resource_type == RES_TYPE_GSCSI)
retval = (RES_BUS(cfgte->resource_address) !=
PMCRAID_VIRTUAL_ENCL_BUS_ID);
@@ -1361,6 +1362,7 @@ static int pmcraid_notify_aen(struct pmcraid_instance *pinstance, u8 type)
* Return value:
* none
*/
+
static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance)
{
struct pmcraid_config_table_entry *cfg_entry;
@@ -1368,9 +1370,10 @@ static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance)
struct pmcraid_cmd *cmd;
struct pmcraid_cmd *cfgcmd;
struct pmcraid_resource_entry *res = NULL;
- u32 new_entry = 1;
unsigned long lock_flags;
unsigned long host_lock_flags;
+ u32 new_entry = 1;
+ u32 hidden_entry = 0;
int rc;
ccn_hcam = (struct pmcraid_hcam_ccn *)pinstance->ccn.hcam;
@@ -1406,9 +1409,15 @@ static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance)
}
/* If this resource is not going to be added to mid-layer, just notify
- * applications and return
+ * applications and return. If this notification is about hiding a VSET
+ * resource, check if it was exposed already.
*/
- if (!pmcraid_expose_resource(cfg_entry))
+ if (pinstance->ccn.hcam->notification_type ==
+ NOTIFICATION_TYPE_ENTRY_CHANGED &&
+ cfg_entry->resource_type == RES_TYPE_VSET &&
+ cfg_entry->unique_flags1 & 0x80) {
+ hidden_entry = 1;
+ } else if (!pmcraid_expose_resource(cfg_entry))
goto out_notify_apps;
spin_lock_irqsave(&pinstance->resource_lock, lock_flags);
@@ -1424,6 +1433,12 @@ static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance)
if (new_entry) {
+ if (hidden_entry) {
+ spin_unlock_irqrestore(&pinstance->resource_lock,
+ lock_flags);
+ goto out_notify_apps;
+ }
+
/* If there are more number of resources than what driver can
* manage, do not notify the applications about the CCN. Just
* ignore this notifications and re-register the same HCAM
@@ -1454,8 +1469,9 @@ static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance)
sizeof(struct pmcraid_config_table_entry));
if (pinstance->ccn.hcam->notification_type ==
- NOTIFICATION_TYPE_ENTRY_DELETED) {
+ NOTIFICATION_TYPE_ENTRY_DELETED || hidden_entry) {
if (res->scsi_dev) {
+ res->cfg_entry.unique_flags1 &= 0x7F;
res->change_detected = RES_CHANGE_DEL;
res->cfg_entry.resource_handle =
PMCRAID_INVALID_RES_HANDLE;
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 2752b56cad5..92f89d50850 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -1,6 +1,9 @@
/*
* pmcraid.h -- PMC Sierra MaxRAID controller driver header file
*
+ * Written By: Anil Ravindranath<anil_ravindranath@pmc-sierra.com>
+ * PMC-Sierra Inc
+ *
* Copyright (C) 2008, 2009 PMC Sierra Inc.
*
* This program is free software; you can redistribute it and/or modify
@@ -106,7 +109,7 @@
#define PMCRAID_VSET_LUN_ID 0x0
#define PMCRAID_PHYS_BUS_ID 0x0
#define PMCRAID_VIRTUAL_ENCL_BUS_ID 0x8
-#define PMCRAID_MAX_VSET_TARGETS 240
+#define PMCRAID_MAX_VSET_TARGETS 0x7F
#define PMCRAID_MAX_VSET_LUNS_PER_TARGET 8
#define PMCRAID_IOA_MAX_SECTORS 32767
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 6b9bf23c773..384afda7dbe 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -1570,9 +1570,6 @@ typedef struct fc_port {
struct fc_rport *rport, *drport;
u32 supported_classes;
- unsigned long last_queue_full;
- unsigned long last_ramp_up;
-
uint16_t vp_idx;
} fc_port_t;
@@ -2265,6 +2262,7 @@ struct qla_hw_data {
uint32_t port0 :1;
uint32_t running_gold_fw :1;
uint32_t cpu_affinity_enabled :1;
+ uint32_t disable_msix_handshake :1;
} flags;
/* This spinlock is used to protect "io transactions", you must
@@ -2387,6 +2385,7 @@ struct qla_hw_data {
#define IS_QLA81XX(ha) (IS_QLA8001(ha))
#define IS_QLA2XXX_MIDTYPE(ha) (IS_QLA24XX(ha) || IS_QLA84XX(ha) || \
IS_QLA25XX(ha) || IS_QLA81XX(ha))
+#define IS_MSIX_NACK_CAPABLE(ha) (IS_QLA81XX(ha))
#define IS_NOPOLLING_TYPE(ha) ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && \
(ha)->flags.msix_enabled)
#define IS_FAC_REQUIRED(ha) (IS_QLA81XX(ha))
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index e2185135850..0b6801fc638 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -72,8 +72,6 @@ extern int ql2xloginretrycount;
extern int ql2xfdmienable;
extern int ql2xallocfwdump;
extern int ql2xextended_error_logging;
-extern int ql2xqfullrampup;
-extern int ql2xqfulltracking;
extern int ql2xiidmaenable;
extern int ql2xmaxqueues;
extern int ql2xmultique_tag;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index b74924b279e..73a793539d4 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1442,7 +1442,17 @@ qla24xx_config_rings(struct scsi_qla_host *vha)
icb->firmware_options_2 |=
__constant_cpu_to_le32(BIT_18);
- icb->firmware_options_2 &= __constant_cpu_to_le32(~BIT_22);
+ /* Use Disable MSIX Handshake mode for capable adapters */
+ if (IS_MSIX_NACK_CAPABLE(ha)) {
+ icb->firmware_options_2 &=
+ __constant_cpu_to_le32(~BIT_22);
+ ha->flags.disable_msix_handshake = 1;
+ qla_printk(KERN_INFO, ha,
+ "MSIX Handshake Disable Mode turned on\n");
+ } else {
+ icb->firmware_options_2 |=
+ __constant_cpu_to_le32(BIT_22);
+ }
icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_23);
WRT_REG_DWORD(&reg->isp25mq.req_q_in, 0);
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 804987397b7..1692a883f4d 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -811,78 +811,6 @@ skip_rio:
qla2x00_alert_all_vps(rsp, mb);
}
-static void
-qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, void *data)
-{
- fc_port_t *fcport = data;
- struct scsi_qla_host *vha = fcport->vha;
- struct qla_hw_data *ha = vha->hw;
- struct req_que *req = NULL;
-
- if (!ql2xqfulltracking)
- return;
-
- req = vha->req;
- if (!req)
- return;
- if (req->max_q_depth <= sdev->queue_depth)
- return;
-
- if (sdev->ordered_tags)
- scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG,
- sdev->queue_depth + 1);
- else
- scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG,
- sdev->queue_depth + 1);
-
- fcport->last_ramp_up = jiffies;
-
- DEBUG2(qla_printk(KERN_INFO, ha,
- "scsi(%ld:%d:%d:%d): Queue depth adjusted-up to %d.\n",
- fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun,
- sdev->queue_depth));
-}
-
-static void
-qla2x00_adjust_sdev_qdepth_down(struct scsi_device *sdev, void *data)
-{
- fc_port_t *fcport = data;
-
- if (!scsi_track_queue_full(sdev, sdev->queue_depth - 1))
- return;
-
- DEBUG2(qla_printk(KERN_INFO, fcport->vha->hw,
- "scsi(%ld:%d:%d:%d): Queue depth adjusted-down to %d.\n",
- fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun,
- sdev->queue_depth));
-}
-
-static inline void
-qla2x00_ramp_up_queue_depth(scsi_qla_host_t *vha, struct req_que *req,
- srb_t *sp)
-{
- fc_port_t *fcport;
- struct scsi_device *sdev;
-
- if (!ql2xqfulltracking)
- return;
-
- sdev = sp->cmd->device;
- if (sdev->queue_depth >= req->max_q_depth)
- return;
-
- fcport = sp->fcport;
- if (time_before(jiffies,
- fcport->last_ramp_up + ql2xqfullrampup * HZ))
- return;
- if (time_before(jiffies,
- fcport->last_queue_full + ql2xqfullrampup * HZ))
- return;
-
- starget_for_each_device(sdev->sdev_target, fcport,
- qla2x00_adjust_sdev_qdepth_up);
-}
-
/**
* qla2x00_process_completed_request() - Process a Fast Post response.
* @ha: SCSI driver HA context
@@ -913,8 +841,6 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha,
/* Save ISP completion status */
sp->cmd->result = DID_OK << 16;
-
- qla2x00_ramp_up_queue_depth(vha, req, sp);
qla2x00_sp_compl(ha, sp);
} else {
DEBUG2(printk("scsi(%ld) Req:%d: Invalid ISP SCSI completion"
@@ -1435,13 +1361,6 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
"scsi(%ld): QUEUE FULL status detected "
"0x%x-0x%x.\n", vha->host_no, comp_status,
scsi_status));
-
- /* Adjust queue depth for all luns on the port. */
- if (!ql2xqfulltracking)
- break;
- fcport->last_queue_full = jiffies;
- starget_for_each_device(cp->device->sdev_target,
- fcport, qla2x00_adjust_sdev_qdepth_down);
break;
}
if (lscsi_status != SS_CHECK_CONDITION)
@@ -1516,17 +1435,6 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
"scsi(%ld): QUEUE FULL status detected "
"0x%x-0x%x.\n", vha->host_no, comp_status,
scsi_status));
-
- /*
- * Adjust queue depth for all luns on the
- * port.
- */
- if (!ql2xqfulltracking)
- break;
- fcport->last_queue_full = jiffies;
- starget_for_each_device(
- cp->device->sdev_target, fcport,
- qla2x00_adjust_sdev_qdepth_down);
break;
}
if (lscsi_status != SS_CHECK_CONDITION)
@@ -2020,7 +1928,7 @@ qla24xx_msix_rsp_q(int irq, void *dev_id)
vha = qla25xx_get_host(rsp);
qla24xx_process_response_queue(vha, rsp);
- if (!ha->mqenable) {
+ if (!ha->flags.disable_msix_handshake) {
WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
RD_REG_DWORD_RELAXED(&reg->hccr);
}
@@ -2034,6 +1942,7 @@ qla25xx_msix_rsp_q(int irq, void *dev_id)
{
struct qla_hw_data *ha;
struct rsp_que *rsp;
+ struct device_reg_24xx __iomem *reg;
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
@@ -2043,6 +1952,14 @@ qla25xx_msix_rsp_q(int irq, void *dev_id)
}
ha = rsp->hw;
+ /* Clear the interrupt, if enabled, for this response queue */
+ if (rsp->options & ~BIT_6) {
+ reg = &ha->iobase->isp24;
+ spin_lock_irq(&ha->hardware_lock);
+ WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
+ RD_REG_DWORD_RELAXED(&reg->hccr);
+ spin_unlock_irq(&ha->hardware_lock);
+ }
queue_work_on((int) (rsp->id - 1), ha->wq, &rsp->q_work);
return IRQ_HANDLED;
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index a47d34308a3..2a4c7f4e7b6 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -696,6 +696,10 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
/* Use alternate PCI devfn */
if (LSB(rsp->rid))
options |= BIT_5;
+ /* Enable MSIX handshake mode on for uncapable adapters */
+ if (!IS_MSIX_NACK_CAPABLE(ha))
+ options |= BIT_6;
+
rsp->options = options;
rsp->id = que_id;
reg = ISP_QUE_REG(ha, que_id);
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 41669357b18..2f873d23732 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -78,21 +78,6 @@ module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xmaxqdepth,
"Maximum queue depth to report for target devices.");
-int ql2xqfulltracking = 1;
-module_param(ql2xqfulltracking, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(ql2xqfulltracking,
- "Controls whether the driver tracks queue full status "
- "returns and dynamically adjusts a scsi device's queue "
- "depth. Default is 1, perform tracking. Set to 0 to "
- "disable dynamic tracking and adjustment of queue depth.");
-
-int ql2xqfullrampup = 120;
-module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(ql2xqfullrampup,
- "Number of seconds to wait to begin to ramp-up the queue "
- "depth for a device after a queue-full condition has been "
- "detected. Default is 120 seconds.");
-
int ql2xiidmaenable=1;
module_param(ql2xiidmaenable, int, S_IRUGO|S_IRUSR);
MODULE_PARM_DESC(ql2xiidmaenable,
@@ -1217,13 +1202,61 @@ qla2xxx_slave_destroy(struct scsi_device *sdev)
sdev->hostdata = NULL;
}
+static void qla2x00_handle_queue_full(struct scsi_device *sdev, int qdepth)
+{
+ fc_port_t *fcport = (struct fc_port *) sdev->hostdata;
+
+ if (!scsi_track_queue_full(sdev, qdepth))
+ return;
+
+ DEBUG2(qla_printk(KERN_INFO, fcport->vha->hw,
+ "scsi(%ld:%d:%d:%d): Queue depth adjusted-down to %d.\n",
+ fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun,
+ sdev->queue_depth));
+}
+
+static void qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, int qdepth)
+{
+ fc_port_t *fcport = sdev->hostdata;
+ struct scsi_qla_host *vha = fcport->vha;
+ struct qla_hw_data *ha = vha->hw;
+ struct req_que *req = NULL;
+
+ req = vha->req;
+ if (!req)
+ return;
+
+ if (req->max_q_depth <= sdev->queue_depth || req->max_q_depth < qdepth)
+ return;
+
+ if (sdev->ordered_tags)
+ scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, qdepth);
+ else
+ scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, qdepth);
+
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "scsi(%ld:%d:%d:%d): Queue depth adjusted-up to %d.\n",
+ fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun,
+ sdev->queue_depth));
+}
+
static int
qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
{
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -EOPNOTSUPP;
+ switch (reason) {
+ case SCSI_QDEPTH_DEFAULT:
+ scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
+ break;
+ case SCSI_QDEPTH_QFULL:
+ qla2x00_handle_queue_full(sdev, qdepth);
+ break;
+ case SCSI_QDEPTH_RAMP_UP:
+ qla2x00_adjust_sdev_qdepth_up(sdev, qdepth);
+ break;
+ default:
+ return EOPNOTSUPP;
+ }
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
return sdev->queue_depth;
}
@@ -2003,13 +2036,13 @@ skip_dpc:
DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n",
base_vha->host_no, ha));
- base_vha->flags.init_done = 1;
- base_vha->flags.online = 1;
-
ret = scsi_add_host(host, &pdev->dev);
if (ret)
goto probe_failed;
+ base_vha->flags.init_done = 1;
+ base_vha->flags.online = 1;
+
ha->isp_ops->enable_intrs(ha);
scsi_scan_host(host);
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 807e0dbc67f..c482220f7ee 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.01-k7"
+#define QLA2XXX_VERSION "8.03.01-k8"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index e495d381394..d8927681ec8 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -859,6 +859,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
case 0x07: /* operation in progress */
case 0x08: /* Long write in progress */
case 0x09: /* self test in progress */
+ case 0x14: /* space allocation in progress */
action = ACTION_DELAYED_RETRY;
break;
default:
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 6531c91501b..ddfcecd5099 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -649,11 +649,22 @@ static __init int fc_transport_init(void)
return error;
error = transport_class_register(&fc_vport_class);
if (error)
- return error;
+ goto unreg_host_class;
error = transport_class_register(&fc_rport_class);
if (error)
- return error;
- return transport_class_register(&fc_transport_class);
+ goto unreg_vport_class;
+ error = transport_class_register(&fc_transport_class);
+ if (error)
+ goto unreg_rport_class;
+ return 0;
+
+unreg_rport_class:
+ transport_class_unregister(&fc_rport_class);
+unreg_vport_class:
+ transport_class_unregister(&fc_vport_class);
+unreg_host_class:
+ transport_class_unregister(&fc_host_class);
+ return error;
}
static void __exit fc_transport_exit(void)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 9093c7261f3..255da53e5a0 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -264,6 +264,15 @@ sd_show_app_tag_own(struct device *dev, struct device_attribute *attr,
return snprintf(buf, 20, "%u\n", sdkp->ATO);
}
+static ssize_t
+sd_show_thin_provisioning(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_disk *sdkp = to_scsi_disk(dev);
+
+ return snprintf(buf, 20, "%u\n", sdkp->thin_provisioning);
+}
+
static struct device_attribute sd_disk_attrs[] = {
__ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type,
sd_store_cache_type),
@@ -274,6 +283,7 @@ static struct device_attribute sd_disk_attrs[] = {
sd_store_manage_start_stop),
__ATTR(protection_type, S_IRUGO, sd_show_protection_type, NULL),
__ATTR(app_tag_own, S_IRUGO, sd_show_app_tag_own, NULL),
+ __ATTR(thin_provisioning, S_IRUGO, sd_show_thin_provisioning, NULL),
__ATTR_NULL,
};
@@ -399,6 +409,57 @@ static void sd_prot_op(struct scsi_cmnd *scmd, unsigned int dif)
}
/**
+ * sd_prepare_discard - unmap blocks on thinly provisioned device
+ * @rq: Request to prepare
+ *
+ * Will issue either UNMAP or WRITE SAME(16) depending on preference
+ * indicated by target device.
+ **/
+static int sd_prepare_discard(struct request *rq)
+{
+ struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
+ struct bio *bio = rq->bio;
+ sector_t sector = bio->bi_sector;
+ unsigned int num = bio_sectors(bio);
+
+ if (sdkp->device->sector_size == 4096) {
+ sector >>= 3;
+ num >>= 3;
+ }
+
+ rq->cmd_type = REQ_TYPE_BLOCK_PC;
+ rq->timeout = SD_TIMEOUT;
+
+ memset(rq->cmd, 0, rq->cmd_len);
+
+ if (sdkp->unmap) {
+ char *buf = kmap_atomic(bio_page(bio), KM_USER0);
+
+ rq->cmd[0] = UNMAP;
+ rq->cmd[8] = 24;
+ rq->cmd_len = 10;
+
+ /* Ensure that data length matches payload */
+ rq->__data_len = bio->bi_size = bio->bi_io_vec->bv_len = 24;
+
+ put_unaligned_be16(6 + 16, &buf[0]);
+ put_unaligned_be16(16, &buf[2]);
+ put_unaligned_be64(sector, &buf[8]);
+ put_unaligned_be32(num, &buf[16]);
+
+ kunmap_atomic(buf, KM_USER0);
+ } else {
+ rq->cmd[0] = WRITE_SAME_16;
+ rq->cmd[1] = 0x8; /* UNMAP */
+ put_unaligned_be64(sector, &rq->cmd[2]);
+ put_unaligned_be32(num, &rq->cmd[10]);
+ rq->cmd_len = 16;
+ }
+
+ return BLKPREP_OK;
+}
+
+/**
* sd_init_command - build a scsi (read or write) command from
* information in the request structure.
* @SCpnt: pointer to mid-level's per scsi command structure that
@@ -418,6 +479,13 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
int ret, host_dif;
unsigned char protect;
+ /*
+ * Discard request come in as REQ_TYPE_FS but we turn them into
+ * block PC requests to make life easier.
+ */
+ if (blk_discard_rq(rq))
+ ret = sd_prepare_discard(rq);
+
if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
ret = scsi_setup_blk_pc_cmnd(sdp, rq);
goto out;
@@ -1432,6 +1500,19 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
sd_printk(KERN_NOTICE, sdkp,
"physical block alignment offset: %u\n", alignment);
+ if (buffer[14] & 0x80) { /* TPE */
+ struct request_queue *q = sdp->request_queue;
+
+ sdkp->thin_provisioning = 1;
+ q->limits.discard_granularity = sdkp->hw_sector_size;
+ q->limits.max_discard_sectors = 0xffffffff;
+
+ if (buffer[14] & 0x40) /* TPRZ */
+ q->limits.discard_zeroes_data = 1;
+
+ queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q);
+ }
+
sdkp->capacity = lba + 1;
return sector_size;
}
@@ -1863,6 +1944,7 @@ void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
*/
static void sd_read_block_limits(struct scsi_disk *sdkp)
{
+ struct request_queue *q = sdkp->disk->queue;
unsigned int sector_sz = sdkp->device->sector_size;
char *buffer;
@@ -1877,6 +1959,31 @@ static void sd_read_block_limits(struct scsi_disk *sdkp)
blk_queue_io_opt(sdkp->disk->queue,
get_unaligned_be32(&buffer[12]) * sector_sz);
+ /* Thin provisioning enabled and page length indicates TP support */
+ if (sdkp->thin_provisioning && buffer[3] == 0x3c) {
+ unsigned int lba_count, desc_count, granularity;
+
+ lba_count = get_unaligned_be32(&buffer[20]);
+ desc_count = get_unaligned_be32(&buffer[24]);
+
+ if (lba_count) {
+ q->limits.max_discard_sectors =
+ lba_count * sector_sz >> 9;
+
+ if (desc_count)
+ sdkp->unmap = 1;
+ }
+
+ granularity = get_unaligned_be32(&buffer[28]);
+
+ if (granularity)
+ q->limits.discard_granularity = granularity * sector_sz;
+
+ if (buffer[32] & 0x80)
+ q->limits.discard_alignment =
+ get_unaligned_be32(&buffer[32]) & ~(1 << 31);
+ }
+
kfree(buffer);
}
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index e374804d26f..43d3caf268e 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -60,6 +60,8 @@ struct scsi_disk {
unsigned RCD : 1; /* state of disk RCD bit, unused */
unsigned DPOFUA : 1; /* state of disk DPOFUA bit */
unsigned first_scan : 1;
+ unsigned thin_provisioning : 1;
+ unsigned unmap : 1;
};
#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev)
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index ad59abb4772..d04ea9a6f67 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -552,13 +552,15 @@ st_do_scsi(struct st_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd
SRpnt->waiting = waiting;
if (STp->buffer->do_dio) {
+ mdata->page_order = 0;
mdata->nr_entries = STp->buffer->sg_segs;
mdata->pages = STp->buffer->mapped_pages;
} else {
+ mdata->page_order = STp->buffer->reserved_page_order;
mdata->nr_entries =
DIV_ROUND_UP(bytes, PAGE_SIZE << mdata->page_order);
- STp->buffer->map_data.pages = STp->buffer->reserved_pages;
- STp->buffer->map_data.offset = 0;
+ mdata->pages = STp->buffer->reserved_pages;
+ mdata->offset = 0;
}
memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd));
@@ -3719,7 +3721,7 @@ static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dm
priority |= __GFP_ZERO;
if (STbuffer->frp_segs) {
- order = STbuffer->map_data.page_order;
+ order = STbuffer->reserved_page_order;
b_size = PAGE_SIZE << order;
} else {
for (b_size = PAGE_SIZE, order = 0;
@@ -3752,7 +3754,7 @@ static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dm
segs++;
}
STbuffer->b_data = page_address(STbuffer->reserved_pages[0]);
- STbuffer->map_data.page_order = order;
+ STbuffer->reserved_page_order = order;
return 1;
}
@@ -3765,7 +3767,7 @@ static void clear_buffer(struct st_buffer * st_bp)
for (i=0; i < st_bp->frp_segs; i++)
memset(page_address(st_bp->reserved_pages[i]), 0,
- PAGE_SIZE << st_bp->map_data.page_order);
+ PAGE_SIZE << st_bp->reserved_page_order);
st_bp->cleared = 1;
}
@@ -3773,7 +3775,7 @@ static void clear_buffer(struct st_buffer * st_bp)
/* Release the extra buffer */
static void normalize_buffer(struct st_buffer * STbuffer)
{
- int i, order = STbuffer->map_data.page_order;
+ int i, order = STbuffer->reserved_page_order;
for (i = 0; i < STbuffer->frp_segs; i++) {
__free_pages(STbuffer->reserved_pages[i], order);
@@ -3781,7 +3783,7 @@ static void normalize_buffer(struct st_buffer * STbuffer)
}
STbuffer->frp_segs = 0;
STbuffer->sg_segs = 0;
- STbuffer->map_data.page_order = 0;
+ STbuffer->reserved_page_order = 0;
STbuffer->map_data.offset = 0;
}
@@ -3791,7 +3793,7 @@ static void normalize_buffer(struct st_buffer * STbuffer)
static int append_to_buffer(const char __user *ubp, struct st_buffer * st_bp, int do_count)
{
int i, cnt, res, offset;
- int length = PAGE_SIZE << st_bp->map_data.page_order;
+ int length = PAGE_SIZE << st_bp->reserved_page_order;
for (i = 0, offset = st_bp->buffer_bytes;
i < st_bp->frp_segs && offset >= length; i++)
@@ -3823,7 +3825,7 @@ static int append_to_buffer(const char __user *ubp, struct st_buffer * st_bp, in
static int from_buffer(struct st_buffer * st_bp, char __user *ubp, int do_count)
{
int i, cnt, res, offset;
- int length = PAGE_SIZE << st_bp->map_data.page_order;
+ int length = PAGE_SIZE << st_bp->reserved_page_order;
for (i = 0, offset = st_bp->read_pointer;
i < st_bp->frp_segs && offset >= length; i++)
@@ -3856,7 +3858,7 @@ static void move_buffer_data(struct st_buffer * st_bp, int offset)
{
int src_seg, dst_seg, src_offset = 0, dst_offset;
int count, total;
- int length = PAGE_SIZE << st_bp->map_data.page_order;
+ int length = PAGE_SIZE << st_bp->reserved_page_order;
if (offset == 0)
return;
@@ -4578,7 +4580,6 @@ static int sgl_map_user_pages(struct st_buffer *STbp,
}
mdata->offset = uaddr & ~PAGE_MASK;
- mdata->page_order = 0;
STbp->mapped_pages = pages;
return nr_pages;
diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h
index 544dc6b1f54..f91a67c6d96 100644
--- a/drivers/scsi/st.h
+++ b/drivers/scsi/st.h
@@ -46,6 +46,7 @@ struct st_buffer {
struct st_request *last_SRpnt;
struct st_cmdstatus cmdstat;
struct page **reserved_pages;
+ int reserved_page_order;
struct page **mapped_pages;
struct rq_map_data map_data;
unsigned char *b_data;
diff --git a/include/linux/enclosure.h b/include/linux/enclosure.h
index 90d1c218411..9a33c5f7e12 100644
--- a/include/linux/enclosure.h
+++ b/include/linux/enclosure.h
@@ -42,6 +42,8 @@ enum enclosure_status {
ENCLOSURE_STATUS_NOT_INSTALLED,
ENCLOSURE_STATUS_UNKNOWN,
ENCLOSURE_STATUS_UNAVAILABLE,
+ /* last element for counting purposes */
+ ENCLOSURE_STATUS_MAX
};
/* SFF-8485 activity light settings */
diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h
index 39d6d109715..a8f37012663 100644
--- a/include/scsi/osd_initiator.h
+++ b/include/scsi/osd_initiator.h
@@ -142,6 +142,7 @@ struct osd_request {
struct _osd_io_info {
struct bio *bio;
u64 total_bytes;
+ u64 residual;
struct request *req;
struct _osd_req_data_segment *last_seg;
u8 *pad_buff;
@@ -150,12 +151,14 @@ struct osd_request {
gfp_t alloc_flags;
unsigned timeout;
unsigned retries;
+ unsigned sense_len;
u8 sense[OSD_MAX_SENSE_LEN];
enum osd_attributes_mode attributes_mode;
osd_req_done_fn *async_done;
void *async_private;
int async_error;
+ int req_errors;
};
static inline bool osd_req_is_ver1(struct osd_request *or)
@@ -297,8 +300,6 @@ enum osd_err_priority {
};
struct osd_sense_info {
- u64 out_resid; /* Zero on success otherwise out residual */
- u64 in_resid; /* Zero on success otherwise in residual */
enum osd_err_priority osd_err_pri;
int key; /* one of enum scsi_sense_keys */