diff options
Diffstat (limited to 'Documentation/i2c/chips/w83627hf')
| -rw-r--r-- | Documentation/i2c/chips/w83627hf | 66 |
1 files changed, 0 insertions, 66 deletions
diff --git a/Documentation/i2c/chips/w83627hf b/Documentation/i2c/chips/w83627hf deleted file mode 100644 index 78f37c2d602..00000000000 --- a/Documentation/i2c/chips/w83627hf +++ /dev/null @@ -1,66 +0,0 @@ -Kernel driver w83627hf -====================== - -Supported chips: - * Winbond W83627HF (ISA accesses ONLY) - Prefix: 'w83627hf' - Addresses scanned: ISA address retrieved from Super I/O registers - Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf - * Winbond W83627THF - Prefix: 'w83627thf' - Addresses scanned: ISA address retrieved from Super I/O registers - Datasheet: http://www.winbond.com/PDF/sheet/w83627thf.pdf - * Winbond W83697HF - Prefix: 'w83697hf' - Addresses scanned: ISA address retrieved from Super I/O registers - Datasheet: http://www.winbond.com/PDF/sheet/697hf.pdf - * Winbond W83637HF - Prefix: 'w83637hf' - Addresses scanned: ISA address retrieved from Super I/O registers - Datasheet: http://www.winbond.com/PDF/sheet/w83637hf.pdf - -Authors: - Frodo Looijaard <frodol@dds.nl>, - Philip Edelbrock <phil@netroedge.com>, - Mark Studebaker <mdsxyz123@yahoo.com>, - Bernhard C. Schrenk <clemy@clemy.org> - -Module Parameters ------------------ - -* force_addr: int - Initialize the ISA address of the sensors -* force_i2c: int - Initialize the I2C address of the sensors -* init: int - (default is 1) - Use 'init=0' to bypass initializing the chip. - Try this if your computer crashes when you load the module. - -Description ------------ - -This driver implements support for ISA accesses *only* for -the Winbond W83627HF, W83627THF, W83697HF and W83637HF Super I/O chips. -We will refer to them collectively as Winbond chips. - -This driver supports ISA accesses, which should be more reliable -than i2c accesses. Also, for Tyan boards which contain both a -Super I/O chip and a second i2c-only Winbond chip (often a W83782D), -using this driver will avoid i2c address conflicts and complex -initialization that were required in the w83781d driver. - -If you really want i2c accesses for these Super I/O chips, -use the w83781d driver. However this is not the preferred method -now that this ISA driver has been developed. - -Technically, the w83627thf does not support a VID reading. However, it's -possible or even likely that your mainboard maker has routed these signals -to a specific set of general purpose IO pins (the Asus P4C800-E is one such -board). The w83627thf driver now interprets these as VID. If the VID on -your board doesn't work, first see doc/vid in the lm_sensors package. If -that still doesn't help, email us at lm-sensors@lm-sensors.org. - -For further information on this driver see the w83781d driver -documentation. - |