diff options
Diffstat (limited to 'arch/arm/mach-ixp4xx')
| -rw-r--r-- | arch/arm/mach-ixp4xx/Kconfig | 9 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/dsmg600-pci.c | 74 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/dsmg600-power.c | 125 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/dsmg600-setup.c | 175 |
5 files changed, 385 insertions, 0 deletions
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index dd0fb7239a8..9715ef506c2 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -95,6 +95,15 @@ config MACH_NAS100D NAS 100d device. For more information on this platform, see http://www.nslu2-linux.org/wiki/NAS100d/HomePage +config MACH_DSMG600 + bool + prompt "D-Link DSM-G600 RevA" + select PCI + help + Say 'Y' here if you want your kernel to support D-Link's + DSM-G600 RevA device. For more information on this platform, + see http://www.nslu2-linux.org/wiki/DSMG600/HomePage + # # Avila and IXDP share the same source for now. Will change in future # diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index 746e297284e..3b87c47e06c 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -12,6 +12,7 @@ obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o +obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o obj-y += common.o @@ -22,5 +23,6 @@ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o +obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c new file mode 100644 index 00000000000..9db7e1f4201 --- /dev/null +++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c @@ -0,0 +1,74 @@ +/* + * DSM-G600 board-level PCI initialization + * + * Copyright (C) 2006 Tower Technologies + * Author: Alessandro Zummo <a.zummo@towertech.it> + * + * based on ixdp425-pci.c: + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Maintainer: http://www.nslu2-linux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +void __init dsmg600_pci_preinit(void) +{ + set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW); + + ixp4xx_pci_preinit(); +} + +static int __init dsmg600_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[DSMG600_PCI_MAX_DEV][DSMG600_PCI_IRQ_LINES] = + { + { IRQ_DSMG600_PCI_INTE, -1, -1 }, + { IRQ_DSMG600_PCI_INTA, -1, -1 }, + { IRQ_DSMG600_PCI_INTB, IRQ_DSMG600_PCI_INTC, IRQ_DSMG600_PCI_INTD }, + { IRQ_DSMG600_PCI_INTF, -1, -1 }, + }; + + int irq = -1; + + if (slot >= 1 && slot <= DSMG600_PCI_MAX_DEV && + pin >= 1 && pin <= DSMG600_PCI_IRQ_LINES) + irq = pci_irq_table[slot-1][pin-1]; + + return irq; +} + +struct hw_pci __initdata dsmg600_pci = { + .nr_controllers = 1, + .preinit = dsmg600_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = dsmg600_map_irq, +}; + +int __init dsmg600_pci_init(void) +{ + if (machine_is_dsmg600()) + pci_common_init(&dsmg600_pci); + + return 0; +} + +subsys_initcall(dsmg600_pci_init); diff --git a/arch/arm/mach-ixp4xx/dsmg600-power.c b/arch/arm/mach-ixp4xx/dsmg600-power.c new file mode 100644 index 00000000000..34717872d07 --- /dev/null +++ b/arch/arm/mach-ixp4xx/dsmg600-power.c @@ -0,0 +1,125 @@ +/* + * arch/arm/mach-ixp4xx/dsmg600-power.c + * + * DSM-G600 Power/Reset driver + * Author: Michael Westerhof <mwester@dls.net> + * + * Based on nslu2-power.c + * Copyright (C) 2005 Tower Technologies + * Author: Alessandro Zummo <a.zummo@towertech.it> + * + * which was based on nslu2-io.c + * Copyright (C) 2004 Karen Spearel + * + * Maintainers: http://www.nslu2-linux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/reboot.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/jiffies.h> +#include <linux/timer.h> + +#include <asm/mach-types.h> + +extern void ctrl_alt_del(void); + +/* This is used to make sure the power-button pusher is serious. The button + * must be held until the value of this counter reaches zero. + */ +static volatile int power_button_countdown; + +/* Must hold the button down for at least this many counts to be processed */ +#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */ + +static void dsmg600_power_handler(unsigned long data); +static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0); + +static void dsmg600_power_handler(unsigned long data) +{ + /* This routine is called twice per second to check the + * state of the power button. + */ + + if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) { + + /* IO Pin is 1 (button pushed) */ + if (power_button_countdown == 0) { + /* Signal init to do the ctrlaltdel action, this will bypass + * init if it hasn't started and do a kernel_restart. + */ + ctrl_alt_del(); + + /* Change the state of the power LED to "blink" */ + gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW); + } + power_button_countdown--; + + } else { + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + } + + mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); +} + +static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id) +{ + /* This is the paper-clip reset, it shuts the machine down directly. */ + machine_power_off(); + + return IRQ_HANDLED; +} + +static int __init dsmg600_power_init(void) +{ + if (!(machine_is_dsmg600())) + return 0; + + if (request_irq(DSMG600_RB_IRQ, &dsmg600_reset_handler, + IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button", + NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + DSMG600_RB_IRQ); + + return -EIO; + } + + /* The power button on the D-Link DSM-G600 is on GPIO 15, but + * it cannot handle interrupts on that GPIO line. So we'll + * have to poll it with a kernel timer. + */ + + /* Make sure that the power button GPIO is set up as an input */ + gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN); + + /* Set the initial value for the power button IRQ handler */ + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + + mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); + + return 0; +} + +static void __exit dsmg600_power_exit(void) +{ + if (!(machine_is_dsmg600())) + return; + + del_timer_sync(&dsmg600_power_timer); + + free_irq(DSMG600_RB_IRQ, NULL); +} + +module_init(dsmg600_power_init); +module_exit(dsmg600_power_exit); + +MODULE_AUTHOR("Michael Westerhof <mwester@dls.net>"); +MODULE_DESCRIPTION("DSM-G600 Power/Reset driver"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c new file mode 100644 index 00000000000..1caff65e22c --- /dev/null +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -0,0 +1,175 @@ +/* + * DSM-G600 board-setup + * + * Copyright (C) 2006 Tower Technologies + * Author: Alessandro Zummo <a.zummo@towertech.it> + * + * based ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Author: Alessandro Zummo <a.zummo@towertech.it> + * Maintainers: http://www.nslu2-linux.org/ + */ + +#include <linux/kernel.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +static struct flash_platform_data dsmg600_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource dsmg600_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device dsmg600_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev.platform_data = &dsmg600_flash_data, + .num_resources = 1, + .resource = &dsmg600_flash_resource, +}; + +static struct ixp4xx_i2c_pins dsmg600_i2c_gpio_pins = { + .sda_pin = DSMG600_SDA_PIN, + .scl_pin = DSMG600_SCL_PIN, +}; + +static struct platform_device dsmg600_i2c_controller = { + .name = "IXP4XX-I2C", + .id = 0, + .dev.platform_data = &dsmg600_i2c_gpio_pins, +}; + +#ifdef CONFIG_LEDS_CLASS +static struct resource dsmg600_led_resources[] = { + { + .name = "power", + .start = DSMG600_LED_PWR_GPIO, + .end = DSMG600_LED_PWR_GPIO, + .flags = IXP4XX_GPIO_HIGH, + }, + { + .name = "wlan", + .start = DSMG600_LED_WLAN_GPIO, + .end = DSMG600_LED_WLAN_GPIO, + .flags = IXP4XX_GPIO_LOW, + }, +}; + +static struct platform_device dsmg600_leds = { + .name = "IXP4XX-GPIO-LED", + .id = -1, + .num_resources = ARRAY_SIZE(dsmg600_led_resources), + .resource = dsmg600_led_resources, +}; +#endif + +static struct resource dsmg600_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct plat_serial8250_port dsmg600_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { } +}; + +static struct platform_device dsmg600_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = dsmg600_uart_data, + .num_resources = ARRAY_SIZE(dsmg600_uart_resources), + .resource = dsmg600_uart_resources, +}; + +static struct platform_device *dsmg600_devices[] __initdata = { + &dsmg600_i2c_controller, + &dsmg600_flash, +}; + +static void dsmg600_power_off(void) +{ + /* enable the pwr cntl gpio */ + gpio_line_config(DSMG600_PO_GPIO, IXP4XX_GPIO_OUT); + + /* poweroff */ + gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH); +} + +static void __init dsmg600_init(void) +{ + ixp4xx_sys_init(); + + /* Make sure that GPIO14 and GPIO15 are not used as clocks */ + *IXP4XX_GPIO_GPCLKR = 0; + + dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + dsmg600_flash_resource.end = + IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + + pm_power_off = dsmg600_power_off; + + /* The UART is required on the DSM-G600 (Redboot cannot use the + * NIC) -- do it here so that it does *not* get removed if + * platform_add_devices fails! + */ + (void)platform_device_register(&dsmg600_uart); + + platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices)); + +#ifdef CONFIG_LEDS_CLASS + /* We don't care whether or not this works. */ + (void)platform_device_register(&dsmg600_leds); +#endif +} + +static void __init dsmg600_fixup(struct machine_desc *desc, + struct tag *tags, char **cmdline, struct meminfo *mi) +{ + /* The xtal on this machine is non-standard. */ + ixp4xx_timer_freq = DSMG600_FREQ; +} + +MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") + /* Maintainer: www.nslu2-linux.org */ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .fixup = dsmg600_fixup, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .init_machine = dsmg600_init, +MACHINE_END |