diff options
Diffstat (limited to 'arch/i386/boot/header.S')
| -rw-r--r-- | arch/i386/boot/header.S | 283 |
1 files changed, 0 insertions, 283 deletions
diff --git a/arch/i386/boot/header.S b/arch/i386/boot/header.S deleted file mode 100644 index f3140e596d4..00000000000 --- a/arch/i386/boot/header.S +++ /dev/null @@ -1,283 +0,0 @@ -/* - * header.S - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * Based on bootsect.S and setup.S - * modified by more people than can be counted - * - * Rewritten as a common file by H. Peter Anvin (Apr 2007) - * - * BIG FAT NOTE: We're in real mode using 64k segments. Therefore segment - * addresses must be multiplied by 16 to obtain their respective linear - * addresses. To avoid confusion, linear addresses are written using leading - * hex while segment addresses are written as segment:offset. - * - */ - -#include <asm/segment.h> -#include <linux/utsrelease.h> -#include <asm/boot.h> -#include <asm/e820.h> -#include <asm/page.h> -#include <asm/setup.h> -#include "boot.h" - -SETUPSECTS = 4 /* default nr of setup-sectors */ -BOOTSEG = 0x07C0 /* original address of boot-sector */ -SYSSEG = DEF_SYSSEG /* system loaded at 0x10000 (65536) */ -SYSSIZE = DEF_SYSSIZE /* system size: # of 16-byte clicks */ - /* to be loaded */ -ROOT_DEV = 0 /* ROOT_DEV is now written by "build" */ -SWAP_DEV = 0 /* SWAP_DEV is now written by "build" */ - -#ifndef SVGA_MODE -#define SVGA_MODE ASK_VGA -#endif - -#ifndef RAMDISK -#define RAMDISK 0 -#endif - -#ifndef ROOT_RDONLY -#define ROOT_RDONLY 1 -#endif - - .code16 - .section ".bstext", "ax" - - .global bootsect_start -bootsect_start: - - # Normalize the start address - ljmp $BOOTSEG, $start2 - -start2: - movw %cs, %ax - movw %ax, %ds - movw %ax, %es - movw %ax, %ss - xorw %sp, %sp - sti - cld - - movw $bugger_off_msg, %si - -msg_loop: - lodsb - andb %al, %al - jz bs_die - movb $0xe, %ah - movw $7, %bx - int $0x10 - jmp msg_loop - -bs_die: - # Allow the user to press a key, then reboot - xorw %ax, %ax - int $0x16 - int $0x19 - - # int 0x19 should never return. In case it does anyway, - # invoke the BIOS reset code... - ljmp $0xf000,$0xfff0 - - .section ".bsdata", "a" -bugger_off_msg: - .ascii "Direct booting from floppy is no longer supported.\r\n" - .ascii "Please use a boot loader program instead.\r\n" - .ascii "\n" - .ascii "Remove disk and press any key to reboot . . .\r\n" - .byte 0 - - - # Kernel attributes; used by setup. This is part 1 of the - # header, from the old boot sector. - - .section ".header", "a" - .globl hdr -hdr: -setup_sects: .byte SETUPSECTS -root_flags: .word ROOT_RDONLY -syssize: .long SYSSIZE -ram_size: .word RAMDISK -vid_mode: .word SVGA_MODE -root_dev: .word ROOT_DEV -boot_flag: .word 0xAA55 - - # offset 512, entry point - - .globl _start -_start: - # Explicitly enter this as bytes, or the assembler - # tries to generate a 3-byte jump here, which causes - # everything else to push off to the wrong offset. - .byte 0xeb # short (2-byte) jump - .byte start_of_setup-1f -1: - - # Part 2 of the header, from the old setup.S - - .ascii "HdrS" # header signature - .word 0x0206 # header version number (>= 0x0105) - # or else old loadlin-1.5 will fail) - .globl realmode_swtch -realmode_swtch: .word 0, 0 # default_switch, SETUPSEG -start_sys_seg: .word SYSSEG - .word kernel_version-512 # pointing to kernel version string - # above section of header is compatible - # with loadlin-1.5 (header v1.5). Don't - # change it. - -type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin, - # Bootlin, SYSLX, bootsect...) - # See Documentation/i386/boot.txt for - # assigned ids - -# flags, unused bits must be zero (RFU) bit within loadflags -loadflags: -LOADED_HIGH = 1 # If set, the kernel is loaded high -CAN_USE_HEAP = 0x80 # If set, the loader also has set - # heap_end_ptr to tell how much - # space behind setup.S can be used for - # heap purposes. - # Only the loader knows what is free -#ifndef __BIG_KERNEL__ - .byte 0 -#else - .byte LOADED_HIGH -#endif - -setup_move_size: .word 0x8000 # size to move, when setup is not - # loaded at 0x90000. We will move setup - # to 0x90000 then just before jumping - # into the kernel. However, only the - # loader knows how much data behind - # us also needs to be loaded. - -code32_start: # here loaders can put a different - # start address for 32-bit code. -#ifndef __BIG_KERNEL__ - .long 0x1000 # 0x1000 = default for zImage -#else - .long 0x100000 # 0x100000 = default for big kernel -#endif - -ramdisk_image: .long 0 # address of loaded ramdisk image - # Here the loader puts the 32-bit - # address where it loaded the image. - # This only will be read by the kernel. - -ramdisk_size: .long 0 # its size in bytes - -bootsect_kludge: - .long 0 # obsolete - -heap_end_ptr: .word _end+1024 # (Header version 0x0201 or later) - # space from here (exclusive) down to - # end of setup code can be used by setup - # for local heap purposes. - -pad1: .word 0 -cmd_line_ptr: .long 0 # (Header version 0x0202 or later) - # If nonzero, a 32-bit pointer - # to the kernel command line. - # The command line should be - # located between the start of - # setup and the end of low - # memory (0xa0000), or it may - # get overwritten before it - # gets read. If this field is - # used, there is no longer - # anything magical about the - # 0x90000 segment; the setup - # can be located anywhere in - # low memory 0x10000 or higher. - -ramdisk_max: .long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff - # (Header version 0x0203 or later) - # The highest safe address for - # the contents of an initrd - -kernel_alignment: .long CONFIG_PHYSICAL_ALIGN #physical addr alignment - #required for protected mode - #kernel -#ifdef CONFIG_RELOCATABLE -relocatable_kernel: .byte 1 -#else -relocatable_kernel: .byte 0 -#endif -pad2: .byte 0 -pad3: .word 0 - -cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line, - #added with boot protocol - #version 2.06 - -# End of setup header ##################################################### - - .section ".inittext", "ax" -start_of_setup: -#ifdef SAFE_RESET_DISK_CONTROLLER -# Reset the disk controller. - movw $0x0000, %ax # Reset disk controller - movb $0x80, %dl # All disks - int $0x13 -#endif - -# We will have entered with %cs = %ds+0x20, normalize %cs so -# it is on par with the other segments. - pushw %ds - pushw $setup2 - lretw - -setup2: -# Force %es = %ds - movw %ds, %ax - movw %ax, %es - cld - -# Stack paranoia: align the stack and make sure it is good -# for both 16- and 32-bit references. In particular, if we -# were meant to have been using the full 16-bit segment, the -# caller might have set %sp to zero, which breaks %esp-based -# references. - andw $~3, %sp # dword align (might as well...) - jnz 1f - movw $0xfffc, %sp # Make sure we're not zero -1: movzwl %sp, %esp # Clear upper half of %esp - sti - -# Check signature at end of setup - cmpl $0x5a5aaa55, setup_sig - jne setup_bad - -# Zero the bss - movw $__bss_start, %di - movw $_end+3, %cx - xorl %eax, %eax - subw %di, %cx - shrw $2, %cx - rep; stosl - -# Jump to C code (should not return) - calll main - -# Setup corrupt somehow... -setup_bad: - movl $setup_corrupt, %eax - calll puts - # Fall through... - - .globl die - .type die, @function -die: - hlt - jmp die - - .size die, .-die - - .section ".initdata", "a" -setup_corrupt: - .byte 7 - .string "No setup signature found...\n" |