diff options
Diffstat (limited to 'arch/ia64/include/asm/sn')
35 files changed, 10124 insertions, 0 deletions
diff --git a/arch/ia64/include/asm/sn/acpi.h b/arch/ia64/include/asm/sn/acpi.h new file mode 100644 index 00000000000..9ce2801cbd5 --- /dev/null +++ b/arch/ia64/include/asm/sn/acpi.h @@ -0,0 +1,17 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_ACPI_H +#define _ASM_IA64_SN_ACPI_H + +#include "acpi/acglobal.h" + +extern int sn_acpi_rev; +#define SN_ACPI_BASE_SUPPORT() (sn_acpi_rev >= 0x20101) + +#endif /* _ASM_IA64_SN_ACPI_H */ diff --git a/arch/ia64/include/asm/sn/addrs.h b/arch/ia64/include/asm/sn/addrs.h new file mode 100644 index 00000000000..e715c794b18 --- /dev/null +++ b/arch/ia64/include/asm/sn/addrs.h @@ -0,0 +1,299 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1992-1999,2001-2005 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_ADDRS_H +#define _ASM_IA64_SN_ADDRS_H + +#include <asm/percpu.h> +#include <asm/sn/types.h> +#include <asm/sn/arch.h> +#include <asm/sn/pda.h> + +/* + * Memory/SHUB Address Format: + * +-+---------+--+--------------+ + * |0| NASID |AS| NodeOffset | + * +-+---------+--+--------------+ + * + * NASID: (low NASID bit is 0) Memory and SHUB MMRs + * AS: 2-bit Address Space Identifier. Used only if low NASID bit is 0 + * 00: Local Resources and MMR space + * Top bit of NodeOffset + * 0: Local resources space + * node id: + * 0: IA64/NT compatibility space + * 2: Local MMR Space + * 4: Local memory, regardless of local node id + * 1: Global MMR space + * 01: GET space. + * 10: AMO space. + * 11: Cacheable memory space. + * + * NodeOffset: byte offset + * + * + * TIO address format: + * +-+----------+--+--------------+ + * |0| NASID |AS| Nodeoffset | + * +-+----------+--+--------------+ + * + * NASID: (low NASID bit is 1) TIO + * AS: 2-bit Chiplet Identifier + * 00: TIO LB (Indicates TIO MMR access.) + * 01: TIO ICE (indicates coretalk space access.) + * + * NodeOffset: top bit must be set. + * + * + * Note that in both of the above address formats, the low + * NASID bit indicates if the reference is to the SHUB or TIO MMRs. + */ + + +/* + * Define basic shift & mask constants for manipulating NASIDs and AS values. + */ +#define NASID_BITMASK (sn_hub_info->nasid_bitmask) +#define NASID_SHIFT (sn_hub_info->nasid_shift) +#define AS_SHIFT (sn_hub_info->as_shift) +#define AS_BITMASK 0x3UL + +#define NASID_MASK ((u64)NASID_BITMASK << NASID_SHIFT) +#define AS_MASK ((u64)AS_BITMASK << AS_SHIFT) + + +/* + * AS values. These are the same on both SHUB1 & SHUB2. + */ +#define AS_GET_VAL 1UL +#define AS_AMO_VAL 2UL +#define AS_CAC_VAL 3UL +#define AS_GET_SPACE (AS_GET_VAL << AS_SHIFT) +#define AS_AMO_SPACE (AS_AMO_VAL << AS_SHIFT) +#define AS_CAC_SPACE (AS_CAC_VAL << AS_SHIFT) + + +/* + * Virtual Mode Local & Global MMR space. + */ +#define SH1_LOCAL_MMR_OFFSET 0x8000000000UL +#define SH2_LOCAL_MMR_OFFSET 0x0200000000UL +#define LOCAL_MMR_OFFSET (is_shub2() ? SH2_LOCAL_MMR_OFFSET : SH1_LOCAL_MMR_OFFSET) +#define LOCAL_MMR_SPACE (__IA64_UNCACHED_OFFSET | LOCAL_MMR_OFFSET) +#define LOCAL_PHYS_MMR_SPACE (RGN_BASE(RGN_HPAGE) | LOCAL_MMR_OFFSET) + +#define SH1_GLOBAL_MMR_OFFSET 0x0800000000UL +#define SH2_GLOBAL_MMR_OFFSET 0x0300000000UL +#define GLOBAL_MMR_OFFSET (is_shub2() ? SH2_GLOBAL_MMR_OFFSET : SH1_GLOBAL_MMR_OFFSET) +#define GLOBAL_MMR_SPACE (__IA64_UNCACHED_OFFSET | GLOBAL_MMR_OFFSET) + +/* + * Physical mode addresses + */ +#define GLOBAL_PHYS_MMR_SPACE (RGN_BASE(RGN_HPAGE) | GLOBAL_MMR_OFFSET) + + +/* + * Clear region & AS bits. + */ +#define TO_PHYS_MASK (~(RGN_BITS | AS_MASK)) + + +/* + * Misc NASID manipulation. + */ +#define NASID_SPACE(n) ((u64)(n) << NASID_SHIFT) +#define REMOTE_ADDR(n,a) (NASID_SPACE(n) | (a)) +#define NODE_OFFSET(x) ((x) & (NODE_ADDRSPACE_SIZE - 1)) +#define NODE_ADDRSPACE_SIZE (1UL << AS_SHIFT) +#define NASID_GET(x) (int) (((u64) (x) >> NASID_SHIFT) & NASID_BITMASK) +#define LOCAL_MMR_ADDR(a) (LOCAL_MMR_SPACE | (a)) +#define GLOBAL_MMR_ADDR(n,a) (GLOBAL_MMR_SPACE | REMOTE_ADDR(n,a)) +#define GLOBAL_MMR_PHYS_ADDR(n,a) (GLOBAL_PHYS_MMR_SPACE | REMOTE_ADDR(n,a)) +#define GLOBAL_CAC_ADDR(n,a) (CAC_BASE | REMOTE_ADDR(n,a)) +#define CHANGE_NASID(n,x) ((void *)(((u64)(x) & ~NASID_MASK) | NASID_SPACE(n))) +#define IS_TIO_NASID(n) ((n) & 1) + + +/* non-II mmr's start at top of big window space (4G) */ +#define BWIN_TOP 0x0000000100000000UL + +/* + * general address defines + */ +#define CAC_BASE (PAGE_OFFSET | AS_CAC_SPACE) +#define AMO_BASE (__IA64_UNCACHED_OFFSET | AS_AMO_SPACE) +#define AMO_PHYS_BASE (RGN_BASE(RGN_HPAGE) | AS_AMO_SPACE) +#define GET_BASE (PAGE_OFFSET | AS_GET_SPACE) + +/* + * Convert Memory addresses between various addressing modes. + */ +#define TO_PHYS(x) (TO_PHYS_MASK & (x)) +#define TO_CAC(x) (CAC_BASE | TO_PHYS(x)) +#ifdef CONFIG_SGI_SN +#define TO_AMO(x) (AMO_BASE | TO_PHYS(x)) +#define TO_GET(x) (GET_BASE | TO_PHYS(x)) +#else +#define TO_AMO(x) ({ BUG(); x; }) +#define TO_GET(x) ({ BUG(); x; }) +#endif + +/* + * Covert from processor physical address to II/TIO physical address: + * II - squeeze out the AS bits + * TIO- requires a chiplet id in bits 38-39. For DMA to memory, + * the chiplet id is zero. If we implement TIO-TIO dma, we might need + * to insert a chiplet id into this macro. However, it is our belief + * right now that this chiplet id will be ICE, which is also zero. + */ +#define SH1_TIO_PHYS_TO_DMA(x) \ + ((((u64)(NASID_GET(x))) << 40) | NODE_OFFSET(x)) + +#define SH2_NETWORK_BANK_OFFSET(x) \ + ((u64)(x) & ((1UL << (sn_hub_info->nasid_shift - 4)) -1)) + +#define SH2_NETWORK_BANK_SELECT(x) \ + ((((u64)(x) & (0x3UL << (sn_hub_info->nasid_shift - 4))) \ + >> (sn_hub_info->nasid_shift - 4)) << 36) + +#define SH2_NETWORK_ADDRESS(x) \ + (SH2_NETWORK_BANK_OFFSET(x) | SH2_NETWORK_BANK_SELECT(x)) + +#define SH2_TIO_PHYS_TO_DMA(x) \ + (((u64)(NASID_GET(x)) << 40) | SH2_NETWORK_ADDRESS(x)) + +#define PHYS_TO_TIODMA(x) \ + (is_shub1() ? SH1_TIO_PHYS_TO_DMA(x) : SH2_TIO_PHYS_TO_DMA(x)) + +#define PHYS_TO_DMA(x) \ + ((((u64)(x) & NASID_MASK) >> 2) | NODE_OFFSET(x)) + + +/* + * Macros to test for address type. + */ +#define IS_AMO_ADDRESS(x) (((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_BASE) +#define IS_AMO_PHYS_ADDRESS(x) (((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_PHYS_BASE) + + +/* + * The following definitions pertain to the IO special address + * space. They define the location of the big and little windows + * of any given node. + */ +#define BWIN_SIZE_BITS 29 /* big window size: 512M */ +#define TIO_BWIN_SIZE_BITS 30 /* big window size: 1G */ +#define NODE_SWIN_BASE(n, w) ((w == 0) ? NODE_BWIN_BASE((n), SWIN0_BIGWIN) \ + : RAW_NODE_SWIN_BASE(n, w)) +#define TIO_SWIN_BASE(n, w) (TIO_IO_BASE(n) + \ + ((u64) (w) << TIO_SWIN_SIZE_BITS)) +#define NODE_IO_BASE(n) (GLOBAL_MMR_SPACE | NASID_SPACE(n)) +#define TIO_IO_BASE(n) (__IA64_UNCACHED_OFFSET | NASID_SPACE(n)) +#define BWIN_SIZE (1UL << BWIN_SIZE_BITS) +#define NODE_BWIN_BASE0(n) (NODE_IO_BASE(n) + BWIN_SIZE) +#define NODE_BWIN_BASE(n, w) (NODE_BWIN_BASE0(n) + ((u64) (w) << BWIN_SIZE_BITS)) +#define RAW_NODE_SWIN_BASE(n, w) (NODE_IO_BASE(n) + ((u64) (w) << SWIN_SIZE_BITS)) +#define BWIN_WIDGET_MASK 0x7 +#define BWIN_WINDOWNUM(x) (((x) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK) +#define SH1_IS_BIG_WINDOW_ADDR(x) ((x) & BWIN_TOP) + +#define TIO_BWIN_WINDOW_SELECT_MASK 0x7 +#define TIO_BWIN_WINDOWNUM(x) (((x) >> TIO_BWIN_SIZE_BITS) & TIO_BWIN_WINDOW_SELECT_MASK) + +#define TIO_HWIN_SHIFT_BITS 33 +#define TIO_HWIN(x) (NODE_OFFSET(x) >> TIO_HWIN_SHIFT_BITS) + +/* + * The following definitions pertain to the IO special address + * space. They define the location of the big and little windows + * of any given node. + */ + +#define SWIN_SIZE_BITS 24 +#define SWIN_WIDGET_MASK 0xF + +#define TIO_SWIN_SIZE_BITS 28 +#define TIO_SWIN_SIZE (1UL << TIO_SWIN_SIZE_BITS) +#define TIO_SWIN_WIDGET_MASK 0x3 + +/* + * Convert smallwindow address to xtalk address. + * + * 'addr' can be physical or virtual address, but will be converted + * to Xtalk address in the range 0 -> SWINZ_SIZEMASK + */ +#define SWIN_WIDGETNUM(x) (((x) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK) +#define TIO_SWIN_WIDGETNUM(x) (((x) >> TIO_SWIN_SIZE_BITS) & TIO_SWIN_WIDGET_MASK) + + +/* + * The following macros produce the correct base virtual address for + * the hub registers. The REMOTE_HUB_* macro produce + * the address for the specified hub's registers. The intent is + * that the appropriate PI, MD, NI, or II register would be substituted + * for x. + * + * WARNING: + * When certain Hub chip workaround are defined, it's not sufficient + * to dereference the *_HUB_ADDR() macros. You should instead use + * HUB_L() and HUB_S() if you must deal with pointers to hub registers. + * Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S(). + * They're always safe. + */ +/* Shub1 TIO & MMR addressing macros */ +#define SH1_TIO_IOSPACE_ADDR(n,x) \ + GLOBAL_MMR_ADDR(n,x) + +#define SH1_REMOTE_BWIN_MMR(n,x) \ + GLOBAL_MMR_ADDR(n,x) + +#define SH1_REMOTE_SWIN_MMR(n,x) \ + (NODE_SWIN_BASE(n,1) + 0x800000UL + (x)) + +#define SH1_REMOTE_MMR(n,x) \ + (SH1_IS_BIG_WINDOW_ADDR(x) ? SH1_REMOTE_BWIN_MMR(n,x) : \ + SH1_REMOTE_SWIN_MMR(n,x)) + +/* Shub1 TIO & MMR addressing macros */ +#define SH2_TIO_IOSPACE_ADDR(n,x) \ + ((__IA64_UNCACHED_OFFSET | REMOTE_ADDR(n,x) | 1UL << (NASID_SHIFT - 2))) + +#define SH2_REMOTE_MMR(n,x) \ + GLOBAL_MMR_ADDR(n,x) + + +/* TIO & MMR addressing macros that work on both shub1 & shub2 */ +#define TIO_IOSPACE_ADDR(n,x) \ + ((u64 *)(is_shub1() ? SH1_TIO_IOSPACE_ADDR(n,x) : \ + SH2_TIO_IOSPACE_ADDR(n,x))) + +#define SH_REMOTE_MMR(n,x) \ + (is_shub1() ? SH1_REMOTE_MMR(n,x) : SH2_REMOTE_MMR(n,x)) + +#define REMOTE_HUB_ADDR(n,x) \ + (IS_TIO_NASID(n) ? ((volatile u64*)TIO_IOSPACE_ADDR(n,x)) : \ + ((volatile u64*)SH_REMOTE_MMR(n,x))) + + +#define HUB_L(x) (*((volatile typeof(*x) *)x)) +#define HUB_S(x,d) (*((volatile typeof(*x) *)x) = (d)) + +#define REMOTE_HUB_L(n, a) HUB_L(REMOTE_HUB_ADDR((n), (a))) +#define REMOTE_HUB_S(n, a, d) HUB_S(REMOTE_HUB_ADDR((n), (a)), (d)) + +/* + * Coretalk address breakdown + */ +#define CTALK_NASID_SHFT 40 +#define CTALK_NASID_MASK (0x3FFFULL << CTALK_NASID_SHFT) +#define CTALK_CID_SHFT 38 +#define CTALK_CID_MASK (0x3ULL << CTALK_CID_SHFT) +#define CTALK_NODE_OFFSET 0x3FFFFFFFFF + +#endif /* _ASM_IA64_SN_ADDRS_H */ diff --git a/arch/ia64/include/asm/sn/arch.h b/arch/ia64/include/asm/sn/arch.h new file mode 100644 index 00000000000..7caa1f44cd9 --- /dev/null +++ b/arch/ia64/include/asm/sn/arch.h @@ -0,0 +1,86 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * SGI specific setup. + * + * Copyright (C) 1995-1997,1999,2001-2005 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) + */ +#ifndef _ASM_IA64_SN_ARCH_H +#define _ASM_IA64_SN_ARCH_H + +#include <linux/numa.h> +#include <asm/types.h> +#include <asm/percpu.h> +#include <asm/sn/types.h> +#include <asm/sn/sn_cpuid.h> + +/* + * This is the maximum number of NUMALINK nodes that can be part of a single + * SSI kernel. This number includes C-brick, M-bricks, and TIOs. Nodes in + * remote partitions are NOT included in this number. + * The number of compact nodes cannot exceed size of a coherency domain. + * The purpose of this define is to specify a node count that includes + * all C/M/TIO nodes in an SSI system. + * + * SGI system can currently support up to 256 C/M nodes plus additional TIO nodes. + * + * Note: ACPI20 has an architectural limit of 256 nodes. When we upgrade + * to ACPI3.0, this limit will be removed. The notion of "compact nodes" + * should be deleted and TIOs should be included in MAX_NUMNODES. + */ +#define MAX_TIO_NODES MAX_NUMNODES +#define MAX_COMPACT_NODES (MAX_NUMNODES + MAX_TIO_NODES) + +/* + * Maximum number of nodes in all partitions and in all coherency domains. + * This is the total number of nodes accessible in the numalink fabric. It + * includes all C & M bricks, plus all TIOs. + * + * This value is also the value of the maximum number of NASIDs in the numalink + * fabric. + */ +#define MAX_NUMALINK_NODES 16384 + +/* + * The following defines attributes of the HUB chip. These attributes are + * frequently referenced. They are kept in the per-cpu data areas of each cpu. + * They are kept together in a struct to minimize cache misses. + */ +struct sn_hub_info_s { + u8 shub2; + u8 nasid_shift; + u8 as_shift; + u8 shub_1_1_found; + u16 nasid_bitmask; +}; +DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info); +#define sn_hub_info (&__get_cpu_var(__sn_hub_info)) +#define is_shub2() (sn_hub_info->shub2) +#define is_shub1() (sn_hub_info->shub2 == 0) + +/* + * Use this macro to test if shub 1.1 wars should be enabled + */ +#define enable_shub_wars_1_1() (sn_hub_info->shub_1_1_found) + + +/* + * Compact node ID to nasid mappings kept in the per-cpu data areas of each + * cpu. + */ +DECLARE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]); +#define sn_cnodeid_to_nasid (&__get_cpu_var(__sn_cnodeid_to_nasid[0])) + + +extern u8 sn_partition_id; +extern u8 sn_system_size; +extern u8 sn_sharing_domain_size; +extern u8 sn_region_size; + +extern void sn_flush_all_caches(long addr, long bytes); +extern bool sn_cpu_disable_allowed(int cpu); + +#endif /* _ASM_IA64_SN_ARCH_H */ diff --git a/arch/ia64/include/asm/sn/bte.h b/arch/ia64/include/asm/sn/bte.h new file mode 100644 index 00000000000..5efecf06c9a --- /dev/null +++ b/arch/ia64/include/asm/sn/bte.h @@ -0,0 +1,234 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved. + */ + + +#ifndef _ASM_IA64_SN_BTE_H +#define _ASM_IA64_SN_BTE_H + +#include <linux/timer.h> +#include <linux/spinlock.h> +#include <linux/cache.h> +#include <asm/sn/pda.h> +#include <asm/sn/types.h> +#include <asm/sn/shub_mmr.h> + +#define IBCT_NOTIFY (0x1UL << 4) +#define IBCT_ZFIL_MODE (0x1UL << 0) + +/* #define BTE_DEBUG */ +/* #define BTE_DEBUG_VERBOSE */ + +#ifdef BTE_DEBUG +# define BTE_PRINTK(x) printk x /* Terse */ +# ifdef BTE_DEBUG_VERBOSE +# define BTE_PRINTKV(x) printk x /* Verbose */ +# else +# define BTE_PRINTKV(x) +# endif /* BTE_DEBUG_VERBOSE */ +#else +# define BTE_PRINTK(x) +# define BTE_PRINTKV(x) +#endif /* BTE_DEBUG */ + + +/* BTE status register only supports 16 bits for length field */ +#define BTE_LEN_BITS (16) +#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1) +#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES) + + +/* Define hardware */ +#define BTES_PER_NODE (is_shub2() ? 4 : 2) +#define MAX_BTES_PER_NODE 4 + +#define BTE2OFF_CTRL 0 +#define BTE2OFF_SRC (SH2_BT_ENG_SRC_ADDR_0 - SH2_BT_ENG_CSR_0) +#define BTE2OFF_DEST (SH2_BT_ENG_DEST_ADDR_0 - SH2_BT_ENG_CSR_0) +#define BTE2OFF_NOTIFY (SH2_BT_ENG_NOTIF_ADDR_0 - SH2_BT_ENG_CSR_0) + +#define BTE_BASE_ADDR(interface) \ + (is_shub2() ? (interface == 0) ? SH2_BT_ENG_CSR_0 : \ + (interface == 1) ? SH2_BT_ENG_CSR_1 : \ + (interface == 2) ? SH2_BT_ENG_CSR_2 : \ + SH2_BT_ENG_CSR_3 \ + : (interface == 0) ? IIO_IBLS0 : IIO_IBLS1) + +#define BTE_SOURCE_ADDR(base) \ + (is_shub2() ? base + (BTE2OFF_SRC/8) \ + : base + (BTEOFF_SRC/8)) + +#define BTE_DEST_ADDR(base) \ + (is_shub2() ? base + (BTE2OFF_DEST/8) \ + : base + (BTEOFF_DEST/8)) + +#define BTE_CTRL_ADDR(base) \ + (is_shub2() ? base + (BTE2OFF_CTRL/8) \ + : base + (BTEOFF_CTRL/8)) + +#define BTE_NOTIF_ADDR(base) \ + (is_shub2() ? base + (BTE2OFF_NOTIFY/8) \ + : base + (BTEOFF_NOTIFY/8)) + +/* Define hardware modes */ +#define BTE_NOTIFY IBCT_NOTIFY +#define BTE_NORMAL BTE_NOTIFY +#define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE) +/* Use a reserved bit to let the caller specify a wait for any BTE */ +#define BTE_WACQUIRE 0x4000 +/* Use the BTE on the node with the destination memory */ +#define BTE_USE_DEST (BTE_WACQUIRE << 1) +/* Use any available BTE interface on any node for the transfer */ +#define BTE_USE_ANY (BTE_USE_DEST << 1) +/* macro to force the IBCT0 value valid */ +#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE)) + +#define BTE_ACTIVE (IBLS_BUSY | IBLS_ERROR) +#define BTE_WORD_AVAILABLE (IBLS_BUSY << 1) +#define BTE_WORD_BUSY (~BTE_WORD_AVAILABLE) + +/* + * Some macros to simplify reading. + * Start with macros to locate the BTE control registers. + */ +#define BTE_LNSTAT_LOAD(_bte) \ + HUB_L(_bte->bte_base_addr) +#define BTE_LNSTAT_STORE(_bte, _x) \ + HUB_S(_bte->bte_base_addr, (_x)) +#define BTE_SRC_STORE(_bte, _x) \ +({ \ + u64 __addr = ((_x) & ~AS_MASK); \ + if (is_shub2()) \ + __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ + HUB_S(_bte->bte_source_addr, __addr); \ +}) +#define BTE_DEST_STORE(_bte, _x) \ +({ \ + u64 __addr = ((_x) & ~AS_MASK); \ + if (is_shub2()) \ + __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ + HUB_S(_bte->bte_destination_addr, __addr); \ +}) +#define BTE_CTRL_STORE(_bte, _x) \ + HUB_S(_bte->bte_control_addr, (_x)) +#define BTE_NOTIF_STORE(_bte, _x) \ +({ \ + u64 __addr = ia64_tpa((_x) & ~AS_MASK); \ + if (is_shub2()) \ + __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ + HUB_S(_bte->bte_notify_addr, __addr); \ +}) + +#define BTE_START_TRANSFER(_bte, _len, _mode) \ + is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY | (_mode << 24) | _len) \ + : BTE_LNSTAT_STORE(_bte, _len); \ + BTE_CTRL_STORE(_bte, _mode) + +/* Possible results from bte_copy and bte_unaligned_copy */ +/* The following error codes map into the BTE hardware codes + * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses + * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero + * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error + * codes to give the following error codes. + */ +#define BTEFAIL_OFFSET 1 + +typedef enum { + BTE_SUCCESS, /* 0 is success */ + BTEFAIL_DIR, /* Directory error due to IIO access*/ + BTEFAIL_POISON, /* poison error on IO access (write to poison page) */ + BTEFAIL_WERR, /* Write error (ie WINV to a Read only line) */ + BTEFAIL_ACCESS, /* access error (protection violation) */ + BTEFAIL_PWERR, /* Partial Write Error */ + BTEFAIL_PRERR, /* Partial Read Error */ + BTEFAIL_TOUT, /* CRB Time out */ + BTEFAIL_XTERR, /* Incoming xtalk pkt had error bit */ + BTEFAIL_NOTAVAIL, /* BTE not available */ +} bte_result_t; + +#define BTEFAIL_SH2_RESP_SHORT 0x1 /* bit 000001 */ +#define BTEFAIL_SH2_RESP_LONG 0x2 /* bit 000010 */ +#define BTEFAIL_SH2_RESP_DSP 0x4 /* bit 000100 */ +#define BTEFAIL_SH2_RESP_ACCESS 0x8 /* bit 001000 */ +#define BTEFAIL_SH2_CRB_TO 0x10 /* bit 010000 */ +#define BTEFAIL_SH2_NACK_LIMIT 0x20 /* bit 100000 */ +#define BTEFAIL_SH2_ALL 0x3F /* bit 111111 */ + +#define BTE_ERR_BITS 0x3FUL +#define BTE_ERR_SHIFT 36 +#define BTE_ERR_MASK (BTE_ERR_BITS << BTE_ERR_SHIFT) + +#define BTE_ERROR_RETRY(value) \ + (is_shub2() ? (value != BTEFAIL_SH2_CRB_TO) \ + : (value != BTEFAIL_TOUT)) + +/* + * On shub1 BTE_ERR_MASK will always be false, so no need for is_shub2() + */ +#define BTE_SHUB2_ERROR(_status) \ + ((_status & BTE_ERR_MASK) \ + ? (((_status >> BTE_ERR_SHIFT) & BTE_ERR_BITS) | IBLS_ERROR) \ + : _status) + +#define BTE_GET_ERROR_STATUS(_status) \ + (BTE_SHUB2_ERROR(_status) & ~IBLS_ERROR) + +#define BTE_VALID_SH2_ERROR(value) \ + ((value >= BTEFAIL_SH2_RESP_SHORT) && (value <= BTEFAIL_SH2_ALL)) + +/* + * Structure defining a bte. An instance of this + * structure is created in the nodepda for each + * bte on that node (as defined by BTES_PER_NODE) + * This structure contains everything necessary + * to work with a BTE. + */ +struct bteinfo_s { + volatile u64 notify ____cacheline_aligned; + u64 *bte_base_addr ____cacheline_aligned; + u64 *bte_source_addr; + u64 *bte_destination_addr; + u64 *bte_control_addr; + u64 *bte_notify_addr; + spinlock_t spinlock; + cnodeid_t bte_cnode; /* cnode */ + int bte_error_count; /* Number of errors encountered */ + int bte_num; /* 0 --> BTE0, 1 --> BTE1 */ + int cleanup_active; /* Interface is locked for cleanup */ + volatile bte_result_t bh_error; /* error while processing */ + volatile u64 *most_rcnt_na; + struct bteinfo_s *btes_to_try[MAX_BTES_PER_NODE]; +}; + + +/* + * Function prototypes (functions defined in bte.c, used elsewhere) + */ +extern bte_result_t bte_copy(u64, u64, u64, u64, void *); +extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64); +extern void bte_error_handler(unsigned long); + +#define bte_zero(dest, len, mode, notification) \ + bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification) + +/* + * The following is the prefered way of calling bte_unaligned_copy + * If the copy is fully cache line aligned, then bte_copy is + * used instead. Since bte_copy is inlined, this saves a call + * stack. NOTE: bte_copy is called synchronously and does block + * until the transfer is complete. In order to get the asynch + * version of bte_copy, you must perform this check yourself. + */ +#define BTE_UNALIGNED_COPY(src, dest, len, mode) \ + (((len & (L1_CACHE_BYTES - 1)) || \ + (src & (L1_CACHE_BYTES - 1)) || \ + (dest & (L1_CACHE_BYTES - 1))) ? \ + bte_unaligned_copy(src, dest, len, mode) : \ + bte_copy(src, dest, len, mode, NULL)) + + +#endif /* _ASM_IA64_SN_BTE_H */ diff --git a/arch/ia64/include/asm/sn/clksupport.h b/arch/ia64/include/asm/sn/clksupport.h new file mode 100644 index 00000000000..d340c365a82 --- /dev/null +++ b/arch/ia64/include/asm/sn/clksupport.h @@ -0,0 +1,28 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. + */ + +/* + * This file contains definitions for accessing a platform supported high resolution + * clock. The clock is monitonically increasing and can be accessed from any node + * in the system. The clock is synchronized across nodes - all nodes see the + * same value. + * + * RTC_COUNTER_ADDR - contains the address of the counter + * + */ + +#ifndef _ASM_IA64_SN_CLKSUPPORT_H +#define _ASM_IA64_SN_CLKSUPPORT_H + +extern unsigned long sn_rtc_cycles_per_second; + +#define RTC_COUNTER_ADDR ((long *)LOCAL_MMR_ADDR(SH_RTC)) + +#define rtc_time() (*RTC_COUNTER_ADDR) + +#endif /* _ASM_IA64_SN_CLKSUPPORT_H */ diff --git a/arch/ia64/include/asm/sn/geo.h b/arch/ia64/include/asm/sn/geo.h new file mode 100644 index 00000000000..f083c943406 --- /dev/null +++ b/arch/ia64/include/asm/sn/geo.h @@ -0,0 +1,132 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_GEO_H +#define _ASM_IA64_SN_GEO_H + +/* The geoid_t implementation below is based loosely on the pcfg_t + implementation in sys/SN/promcfg.h. */ + +/* Type declaractions */ + +/* Size of a geoid_t structure (must be before decl. of geoid_u) */ +#define GEOID_SIZE 8 /* Would 16 be better? The size can + be different on different platforms. */ + +#define MAX_SLOTS 0xf /* slots per module */ +#define MAX_SLABS 0xf /* slabs per slot */ + +typedef unsigned char geo_type_t; + +/* Fields common to all substructures */ +typedef struct geo_common_s { + moduleid_t module; /* The module (box) this h/w lives in */ + geo_type_t type; /* What type of h/w is named by this geoid_t */ + slabid_t slab:4; /* slab (ASIC), 0 .. 15 within slot */ + slotid_t slot:4; /* slot (Blade), 0 .. 15 within module */ +} geo_common_t; + +/* Additional fields for particular types of hardware */ +typedef struct geo_node_s { + geo_common_t common; /* No additional fields needed */ +} geo_node_t; + +typedef struct geo_rtr_s { + geo_common_t common; /* No additional fields needed */ +} geo_rtr_t; + +typedef struct geo_iocntl_s { + geo_common_t common; /* No additional fields needed */ +} geo_iocntl_t; + +typedef struct geo_pcicard_s { + geo_iocntl_t common; + char bus; /* Bus/widget number */ + char slot; /* PCI slot number */ +} geo_pcicard_t; + +/* Subcomponents of a node */ +typedef struct geo_cpu_s { + geo_node_t node; + char slice; /* Which CPU on the node */ +} geo_cpu_t; + +typedef struct geo_mem_s { + geo_node_t node; + char membus; /* The memory bus on the node */ + char memslot; /* The memory slot on the bus */ +} geo_mem_t; + + +typedef union geoid_u { + geo_common_t common; + geo_node_t node; + geo_iocntl_t iocntl; + geo_pcicard_t pcicard; + geo_rtr_t rtr; + geo_cpu_t cpu; + geo_mem_t mem; + char padsize[GEOID_SIZE]; +} geoid_t; + + +/* Preprocessor macros */ + +#define GEO_MAX_LEN 48 /* max. formatted length, plus some pad: + module/001c07/slab/5/node/memory/2/slot/4 */ + +/* Values for geo_type_t */ +#define GEO_TYPE_INVALID 0 +#define GEO_TYPE_MODULE 1 +#define GEO_TYPE_NODE 2 +#define GEO_TYPE_RTR 3 +#define GEO_TYPE_IOCNTL 4 +#define GEO_TYPE_IOCARD 5 +#define GEO_TYPE_CPU 6 +#define GEO_TYPE_MEM 7 +#define GEO_TYPE_MAX (GEO_TYPE_MEM+1) + +/* Parameter for hwcfg_format_geoid_compt() */ +#define GEO_COMPT_MODULE 1 +#define GEO_COMPT_SLAB 2 +#define GEO_COMPT_IOBUS 3 +#define GEO_COMPT_IOSLOT 4 +#define GEO_COMPT_CPU 5 +#define GEO_COMPT_MEMBUS 6 +#define GEO_COMPT_MEMSLOT 7 + +#define GEO_INVALID_STR "<invalid>" + +#define INVALID_NASID ((nasid_t)-1) +#define INVALID_CNODEID ((cnodeid_t)-1) +#define INVALID_PNODEID ((pnodeid_t)-1) +#define INVALID_SLAB (slabid_t)-1 +#define INVALID_SLOT (slotid_t)-1 +#define INVALID_MODULE ((moduleid_t)-1) + +static inline slabid_t geo_slab(geoid_t g) +{ + return (g.common.type == GEO_TYPE_INVALID) ? + INVALID_SLAB : g.common.slab; +} + +static inline slotid_t geo_slot(geoid_t g) +{ + return (g.common.type == GEO_TYPE_INVALID) ? + INVALID_SLOT : g.common.slot; +} + +static inline moduleid_t geo_module(geoid_t g) +{ + return (g.common.type == GEO_TYPE_INVALID) ? + INVALID_MODULE : g.common.module; +} + +extern geoid_t cnodeid_get_geoid(cnodeid_t cnode); + +#endif /* _ASM_IA64_SN_GEO_H */ diff --git a/arch/ia64/include/asm/sn/intr.h b/arch/ia64/include/asm/sn/intr.h new file mode 100644 index 00000000000..e0487aa9741 --- /dev/null +++ b/arch/ia64/include/asm/sn/intr.h @@ -0,0 +1,68 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_INTR_H +#define _ASM_IA64_SN_INTR_H + +#include <linux/rcupdate.h> +#include <asm/sn/types.h> + +#define SGI_UART_VECTOR 0xe9 + +/* Reserved IRQs : Note, not to exceed IA64_SN2_FIRST_DEVICE_VECTOR */ +#define SGI_XPC_ACTIVATE 0x30 +#define SGI_II_ERROR 0x31 +#define SGI_XBOW_ERROR 0x32 +#define SGI_PCIASIC_ERROR 0x33 +#define SGI_ACPI_SCI_INT 0x34 +#define SGI_TIOCA_ERROR 0x35 +#define SGI_TIO_ERROR 0x36 +#define SGI_TIOCX_ERROR 0x37 +#define SGI_MMTIMER_VECTOR 0x38 +#define SGI_XPC_NOTIFY 0xe7 + +#define IA64_SN2_FIRST_DEVICE_VECTOR 0x3c +#define IA64_SN2_LAST_DEVICE_VECTOR 0xe6 + +#define SN2_IRQ_RESERVED 0x1 +#define SN2_IRQ_CONNECTED 0x2 +#define SN2_IRQ_SHARED 0x4 + +// The SN PROM irq struct +struct sn_irq_info { + struct sn_irq_info *irq_next; /* deprecated DO NOT USE */ + short irq_nasid; /* Nasid IRQ is assigned to */ + int irq_slice; /* slice IRQ is assigned to */ + int irq_cpuid; /* kernel logical cpuid */ + int irq_irq; /* the IRQ number */ + int irq_int_bit; /* Bridge interrupt pin */ + /* <0 means MSI */ + u64 irq_xtalkaddr; /* xtalkaddr IRQ is sent to */ + int irq_bridge_type;/* pciio asic type (pciio.h) */ + void *irq_bridge; /* bridge generating irq */ + void *irq_pciioinfo; /* associated pciio_info_t */ + int irq_last_intr; /* For Shub lb lost intr WAR */ + int irq_cookie; /* unique cookie */ + int irq_flags; /* flags */ + int irq_share_cnt; /* num devices sharing IRQ */ + struct list_head list; /* list of sn_irq_info structs */ + struct rcu_head rcu; /* rcu callback list */ +}; + +extern void sn_send_IPI_phys(int, long, int, int); +extern u64 sn_intr_alloc(nasid_t, int, + struct sn_irq_info *, + int, nasid_t, int); +extern void sn_intr_free(nasid_t, int, struct sn_irq_info *); +extern struct sn_irq_info *sn_retarget_vector(struct sn_irq_info *, nasid_t, int); +extern void sn_set_err_irq_affinity(unsigned int); +extern struct list_head **sn_irq_lh; + +#define CPU_VECTOR_TO_IRQ(cpuid,vector) (vector) + +#endif /* _ASM_IA64_SN_INTR_H */ diff --git a/arch/ia64/include/asm/sn/io.h b/arch/ia64/include/asm/sn/io.h new file mode 100644 index 00000000000..41c73a73562 --- /dev/null +++ b/arch/ia64/include/asm/sn/io.h @@ -0,0 +1,274 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_SN_IO_H +#define _ASM_SN_IO_H +#include <linux/compiler.h> +#include <asm/intrinsics.h> + +extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */ +extern void __sn_mmiowb(void); /* Forward definition */ + +extern int num_cnodes; + +#define __sn_mf_a() ia64_mfa() + +extern void sn_dma_flush(unsigned long); + +#define __sn_inb ___sn_inb +#define __sn_inw ___sn_inw +#define __sn_inl ___sn_inl +#define __sn_outb ___sn_outb +#define __sn_outw ___sn_outw +#define __sn_outl ___sn_outl +#define __sn_readb ___sn_readb +#define __sn_readw ___sn_readw +#define __sn_readl ___sn_readl +#define __sn_readq ___sn_readq +#define __sn_readb_relaxed ___sn_readb_relaxed +#define __sn_readw_relaxed ___sn_readw_relaxed +#define __sn_readl_relaxed ___sn_readl_relaxed +#define __sn_readq_relaxed ___sn_readq_relaxed + +/* + * Convenience macros for setting/clearing bits using the above accessors + */ + +#define __sn_setq_relaxed(addr, val) \ + writeq((__sn_readq_relaxed(addr) | (val)), (addr)) +#define __sn_clrq_relaxed(addr, val) \ + writeq((__sn_readq_relaxed(addr) & ~(val)), (addr)) + +/* + * The following routines are SN Platform specific, called when + * a reference is made to inX/outX set macros. SN Platform + * inX set of macros ensures that Posted DMA writes on the + * Bridge is flushed. + * + * The routines should be self explainatory. + */ + +static inline unsigned int +___sn_inb (unsigned long port) +{ + volatile unsigned char *addr; + unsigned char ret = -1; + + if ((addr = sn_io_addr(port))) { + ret = *addr; + __sn_mf_a(); + sn_dma_flush((unsigned long)addr); + } + return ret; +} + +static inline unsigned int +___sn_inw (unsigned long port) +{ + volatile unsigned short *addr; + unsigned short ret = -1; + + if ((addr = sn_io_addr(port))) { + ret = *addr; + __sn_mf_a(); + sn_dma_flush((unsigned long)addr); + } + return ret; +} + +static inline unsigned int +___sn_inl (unsigned long port) +{ + volatile unsigned int *addr; + unsigned int ret = -1; + + if ((addr = sn_io_addr(port))) { + ret = *addr; + __sn_mf_a(); + sn_dma_flush((unsigned long)addr); + } + return ret; +} + +static inline void +___sn_outb (unsigned char val, unsigned long port) +{ + volatile unsigned char *addr; + + if ((addr = sn_io_addr(port))) { + *addr = val; + __sn_mmiowb(); + } +} + +static inline void +___sn_outw (unsigned short val, unsigned long port) +{ + volatile unsigned short *addr; + + if ((addr = sn_io_addr(port))) { + *addr = val; + __sn_mmiowb(); + } +} + +static inline void +___sn_outl (unsigned int val, unsigned long port) +{ + volatile unsigned int *addr; + + if ((addr = sn_io_addr(port))) { + *addr = val; + __sn_mmiowb(); + } +} + +/* + * The following routines are SN Platform specific, called when + * a reference is made to readX/writeX set macros. SN Platform + * readX set of macros ensures that Posted DMA writes on the + * Bridge is flushed. + * + * The routines should be self explainatory. + */ + +static inline unsigned char +___sn_readb (const volatile void __iomem *addr) +{ + unsigned char val; + + val = *(volatile unsigned char __force *)addr; + __sn_mf_a(); + sn_dma_flush((unsigned long)addr); + return val; +} + +static inline unsigned short +___sn_readw (const volatile void __iomem *addr) +{ + unsigned short val; + + val = *(volatile unsigned short __force *)addr; + __sn_mf_a(); + sn_dma_flush((unsigned long)addr); + return val; +} + +static inline unsigned int +___sn_readl (const volatile void __iomem *addr) +{ + unsigned int val; + + val = *(volatile unsigned int __force *)addr; + __sn_mf_a(); + sn_dma_flush((unsigned long)addr); + return val; +} + +static inline unsigned long +___sn_readq (const volatile void __iomem *addr) +{ + unsigned long val; + + val = *(volatile unsigned long __force *)addr; + __sn_mf_a(); + sn_dma_flush((unsigned long)addr); + return val; +} + +/* + * For generic and SN2 kernels, we have a set of fast access + * PIO macros. These macros are provided on SN Platform + * because the normal inX and readX macros perform an + * additional task of flushing Post DMA request on the Bridge. + * + * These routines should be self explainatory. + */ + +static inline unsigned int +sn_inb_fast (unsigned long port) +{ + volatile unsigned char *addr = (unsigned char *)port; + unsigned char ret; + + ret = *addr; + __sn_mf_a(); + return ret; +} + +static inline unsigned int +sn_inw_fast (unsigned long port) +{ + volatile unsigned short *addr = (unsigned short *)port; + unsigned short ret; + + ret = *addr; + __sn_mf_a(); + return ret; +} + +static inline unsigned int +sn_inl_fast (unsigned long port) +{ + volatile unsigned int *addr = (unsigned int *)port; + unsigned int ret; + + ret = *addr; + __sn_mf_a(); + return ret; +} + +static inline unsigned char +___sn_readb_relaxed (const volatile void __iomem *addr) +{ + return *(volatile unsigned char __force *)addr; +} + +static inline unsigned short +___sn_readw_relaxed (const volatile void __iomem *addr) +{ + return *(volatile unsigned short __force *)addr; +} + +static inline unsigned int +___sn_readl_relaxed (const volatile void __iomem *addr) +{ + return *(volatile unsigned int __force *) addr; +} + +static inline unsigned long +___sn_readq_relaxed (const volatile void __iomem *addr) +{ + return *(volatile unsigned long __force *) addr; +} + +struct pci_dev; + +static inline int +sn_pci_set_vchan(struct pci_dev *pci_dev, unsigned long *addr, int vchan) +{ + + if (vchan > 1) { + return -1; + } + + if (!(*addr >> 32)) /* Using a mask here would be cleaner */ + return 0; /* but this generates better code */ + + if (vchan == 1) { + /* Set Bit 57 */ + *addr |= (1UL << 57); + } else { + /* Clear Bit 57 */ + *addr &= ~(1UL << 57); + } + + return 0; +} + +#endif /* _ASM_SN_IO_H */ diff --git a/arch/ia64/include/asm/sn/ioc3.h b/arch/ia64/include/asm/sn/ioc3.h new file mode 100644 index 00000000000..95ed6cc83cf --- /dev/null +++ b/arch/ia64/include/asm/sn/ioc3.h @@ -0,0 +1,241 @@ +/* + * Copyright (C) 2005 Silicon Graphics, Inc. + */ +#ifndef IA64_SN_IOC3_H +#define IA64_SN_IOC3_H + +/* serial port register map */ +struct ioc3_serialregs { + uint32_t sscr; + uint32_t stpir; + uint32_t stcir; + uint32_t srpir; + uint32_t srcir; + uint32_t srtr; + uint32_t shadow; +}; + +/* SUPERIO uart register map */ +struct ioc3_uartregs { + char iu_lcr; + union { + char iir; /* read only */ + char fcr; /* write only */ + } u3; + union { + char ier; /* DLAB == 0 */ + char dlm; /* DLAB == 1 */ + } u2; + union { + char rbr; /* read only, DLAB == 0 */ + char thr; /* write only, DLAB == 0 */ + char dll; /* DLAB == 1 */ + } u1; + char iu_scr; + char iu_msr; + char iu_lsr; + char iu_mcr; +}; + +#define iu_rbr u1.rbr +#define iu_thr u1.thr +#define iu_dll u1.dll +#define iu_ier u2.ier +#define iu_dlm u2.dlm +#define iu_iir u3.iir +#define iu_fcr u3.fcr + +struct ioc3_sioregs { + char fill[0x170]; + struct ioc3_uartregs uartb; + struct ioc3_uartregs uarta; +}; + +/* PCI IO/mem space register map */ +struct ioc3 { + uint32_t pci_id; + uint32_t pci_scr; + uint32_t pci_rev; + uint32_t pci_lat; + uint32_t pci_addr; + uint32_t pci_err_addr_l; + uint32_t pci_err_addr_h; + + uint32_t sio_ir; + /* these registers are read-only for general kernel code. To + * modify them use the functions in ioc3.c + */ + uint32_t sio_ies; + uint32_t sio_iec; + uint32_t sio_cr; + uint32_t int_out; + uint32_t mcr; + uint32_t gpcr_s; + uint32_t gpcr_c; + uint32_t gpdr; + uint32_t gppr[9]; + char fill[0x4c]; + + /* serial port registers */ + uint32_t sbbr_h; + uint32_t sbbr_l; + + struct ioc3_serialregs port_a; + struct ioc3_serialregs port_b; + char fill1[0x1ff10]; + /* superio registers */ + struct ioc3_sioregs sregs; +}; + +/* These don't exist on the ioc3 serial card... */ +#define eier fill1[8] +#define eisr fill1[4] + +#define PCI_LAT 0xc /* Latency Timer */ +#define PCI_SCR_DROP_MODE_EN 0x00008000 /* drop pios on parity err */ +#define UARTA_BASE 0x178 +#define UARTB_BASE 0x170 + + +/* bitmasks for serial RX status byte */ +#define RXSB_OVERRUN 0x01 /* char(s) lost */ +#define RXSB_PAR_ERR 0x02 /* parity error */ +#define RXSB_FRAME_ERR 0x04 /* framing error */ +#define RXSB_BREAK 0x08 /* break character */ +#define RXSB_CTS 0x10 /* state of CTS */ +#define RXSB_DCD 0x20 /* state of DCD */ +#define RXSB_MODEM_VALID 0x40 /* DCD, CTS and OVERRUN are valid */ +#define RXSB_DATA_VALID 0x80 /* FRAME_ERR PAR_ERR & BREAK valid */ + +/* bitmasks for serial TX control byte */ +#define TXCB_INT_WHEN_DONE 0x20 /* interrupt after this byte is sent */ +#define TXCB_INVALID 0x00 /* byte is invalid */ +#define TXCB_VALID 0x40 /* byte is valid */ +#define TXCB_MCR 0x80 /* data<7:0> to modem cntrl register */ +#define TXCB_DELAY 0xc0 /* delay data<7:0> mSec */ + +/* bitmasks for SBBR_L */ +#define SBBR_L_SIZE 0x00000001 /* 0 1KB rings, 1 4KB rings */ + +/* bitmasks for SSCR_<A:B> */ +#define SSCR_RX_THRESHOLD 0x000001ff /* hiwater mark */ +#define SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */ +#define SSCR_HFC_EN 0x00020000 /* h/w flow cntrl enabled */ +#define SSCR_RX_RING_DCD 0x00040000 /* postRX record on delta-DCD */ +#define SSCR_RX_RING_CTS 0x00080000 /* postRX record on delta-CTS */ +#define SSCR_HIGH_SPD 0x00100000 /* 4X speed */ +#define SSCR_DIAG 0x00200000 /* bypass clock divider */ +#define SSCR_RX_DRAIN 0x08000000 /* drain RX buffer to memory */ +#define SSCR_DMA_EN 0x10000000 /* enable ring buffer DMA */ +#define SSCR_DMA_PAUSE 0x20000000 /* pause DMA */ +#define SSCR_PAUSE_STATE 0x40000000 /* set when PAUSE takes effect*/ +#define SSCR_RESET 0x80000000 /* reset DMA channels */ + +/* all producer/comsumer pointers are the same bitfield */ +#define PROD_CONS_PTR_4K 0x00000ff8 /* for 4K buffers */ +#define PROD_CONS_PTR_1K 0x000003f8 /* for 1K buffers */ +#define PROD_CONS_PTR_OFF 3 + +/* bitmasks for SRCIR_<A:B> */ +#define SRCIR_ARM 0x80000000 /* arm RX timer */ + +/* bitmasks for SHADOW_<A:B> */ +#define SHADOW_DR 0x00000001 /* data ready */ +#define SHADOW_OE 0x00000002 /* overrun error */ +#define SHADOW_PE 0x00000004 /* parity error */ +#define SHADOW_FE 0x00000008 /* framing error */ +#define SHADOW_BI 0x00000010 /* break interrupt */ +#define SHADOW_THRE 0x00000020 /* transmit holding reg empty */ +#define SHADOW_TEMT 0x00000040 /* transmit shift reg empty */ +#define SHADOW_RFCE 0x00000080 /* char in RX fifo has error */ +#define SHADOW_DCTS 0x00010000 /* delta clear to send */ +#define SHADOW_DDCD 0x00080000 /* delta data carrier detect */ +#define SHADOW_CTS 0x00100000 /* clear to send */ +#define SHADOW_DCD 0x00800000 /* data carrier detect */ +#define SHADOW_DTR 0x01000000 /* data terminal ready */ +#define SHADOW_RTS 0x02000000 /* request to send */ +#define SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */ +#define SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */ +#define SHADOW_LOOP 0x10000000 /* loopback enabled */ + +/* bitmasks for SRTR_<A:B> */ +#define SRTR_CNT 0x00000fff /* reload value for RX timer */ +#define SRTR_CNT_VAL 0x0fff0000 /* current value of RX timer */ +#define SRTR_CNT_VAL_SHIFT 16 +#define SRTR_HZ 16000 /* SRTR clock frequency */ + +/* bitmasks for SIO_IR, SIO_IEC and SIO_IES */ +#define SIO_IR_SA_TX_MT 0x00000001 /* Serial port A TX empty */ +#define SIO_IR_SA_RX_FULL 0x00000002 /* port A RX buf full */ +#define SIO_IR_SA_RX_HIGH 0x00000004 /* port A RX hiwat */ +#define SIO_IR_SA_RX_TIMER 0x00000008 /* port A RX timeout */ +#define SIO_IR_SA_DELTA_DCD 0x00000010 /* port A delta DCD */ +#define SIO_IR_SA_DELTA_CTS 0x00000020 /* port A delta CTS */ +#define SIO_IR_SA_INT 0x00000040 /* port A pass-thru intr */ +#define SIO_IR_SA_TX_EXPLICIT 0x00000080 /* port A explicit TX thru */ +#define SIO_IR_SA_MEMERR 0x00000100 /* port A PCI error */ +#define SIO_IR_SB_TX_MT 0x00000200 +#define SIO_IR_SB_RX_FULL 0x00000400 +#define SIO_IR_SB_RX_HIGH 0x00000800 +#define SIO_IR_SB_RX_TIMER 0x00001000 +#define SIO_IR_SB_DELTA_DCD 0x00002000 +#define SIO_IR_SB_DELTA_CTS 0x00004000 +#define SIO_IR_SB_INT 0x00008000 +#define SIO_IR_SB_TX_EXPLICIT 0x00010000 +#define SIO_IR_SB_MEMERR 0x00020000 +#define SIO_IR_PP_INT 0x00040000 /* P port pass-thru intr */ +#define SIO_IR_PP_INTA 0x00080000 /* PP context A thru */ +#define SIO_IR_PP_INTB 0x00100000 /* PP context B thru */ +#define SIO_IR_PP_MEMERR 0x00200000 /* PP PCI error */ +#define SIO_IR_KBD_INT 0x00400000 /* kbd/mouse intr */ +#define SIO_IR_RT_INT 0x08000000 /* RT output pulse */ +#define SIO_IR_GEN_INT1 0x10000000 /* RT input pulse */ +#define SIO_IR_GEN_INT_SHIFT 28 + +/* per device interrupt masks */ +#define SIO_IR_SA (SIO_IR_SA_TX_MT | \ + SIO_IR_SA_RX_FULL | \ + SIO_IR_SA_RX_HIGH | \ + SIO_IR_SA_RX_TIMER | \ + SIO_IR_SA_DELTA_DCD | \ + SIO_IR_SA_DELTA_CTS | \ + SIO_IR_SA_INT | \ + SIO_IR_SA_TX_EXPLICIT | \ + SIO_IR_SA_MEMERR) + +#define SIO_IR_SB (SIO_IR_SB_TX_MT | \ + SIO_IR_SB_RX_FULL | \ + SIO_IR_SB_RX_HIGH | \ + SIO_IR_SB_RX_TIMER | \ + SIO_IR_SB_DELTA_DCD | \ + SIO_IR_SB_DELTA_CTS | \ + SIO_IR_SB_INT | \ + SIO_IR_SB_TX_EXPLICIT | \ + SIO_IR_SB_MEMERR) + +#define SIO_IR_PP (SIO_IR_PP_INT | SIO_IR_PP_INTA | \ + SIO_IR_PP_INTB | SIO_IR_PP_MEMERR) +#define SIO_IR_RT (SIO_IR_RT_INT | SIO_IR_GEN_INT1) + +/* bitmasks for SIO_CR */ +#define SIO_CR_CMD_PULSE_SHIFT 15 +#define SIO_CR_SER_A_BASE_SHIFT 1 +#define SIO_CR_SER_B_BASE_SHIFT 8 +#define SIO_CR_ARB_DIAG 0x00380000 /* cur !enet PCI requet (ro) */ +#define SIO_CR_ARB_DIAG_TXA 0x00000000 +#define SIO_CR_ARB_DIAG_RXA 0x00080000 +#define SIO_CR_ARB_DIAG_TXB 0x00100000 +#define SIO_CR_ARB_DIAG_RXB 0x00180000 +#define SIO_CR_ARB_DIAG_PP 0x00200000 +#define SIO_CR_ARB_DIAG_IDLE 0x00400000 /* 0 -> active request (ro) */ + +/* defs for some of the generic I/O pins */ +#define GPCR_PHY_RESET 0x20 /* pin is output to PHY reset */ +#define GPCR_UARTB_MODESEL 0x40 /* pin is output to port B mode sel */ +#define GPCR_UARTA_MODESEL 0x80 /* pin is output to port A mode sel */ + +#define GPPR_PHY_RESET_PIN 5 /* GIO pin controlling phy reset */ +#define GPPR_UARTB_MODESEL_PIN 6 /* GIO pin cntrling uartb modeselect */ +#define GPPR_UARTA_MODESEL_PIN 7 /* GIO pin cntrling uarta modeselect */ + +#endif /* IA64_SN_IOC3_H */ diff --git a/arch/ia64/include/asm/sn/klconfig.h b/arch/ia64/include/asm/sn/klconfig.h new file mode 100644 index 00000000000..bcbf209d63b --- /dev/null +++ b/arch/ia64/include/asm/sn/klconfig.h @@ -0,0 +1,246 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX <sys/SN/klconfig.h>. + * + * Copyright (C) 1992-1997,1999,2001-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_IA64_SN_KLCONFIG_H +#define _ASM_IA64_SN_KLCONFIG_H + +/* + * The KLCONFIG structures store info about the various BOARDs found + * during Hardware Discovery. In addition, it stores info about the + * components found on the BOARDs. + */ + +typedef s32 klconf_off_t; + + +/* Functions/macros needed to use this structure */ + +typedef struct kl_config_hdr { + char pad[20]; + klconf_off_t ch_board_info; /* the link list of boards */ + char pad0[88]; +} kl_config_hdr_t; + + +#define NODE_OFFSET_TO_LBOARD(nasid,off) (lboard_t*)(GLOBAL_CAC_ADDR((nasid), (off))) + +/* + * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD + * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to + * the LOCAL/current NODE. REMOTE means it is attached to a different + * node.(TBD - Need a way to treat ROUTER boards.) + * + * There are 2 different structures to represent these boards - + * lboard - Local board, rboard - remote board. These 2 structures + * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer + * Figure below). The first byte of the rboard or lboard structure + * is used to find out its type - no unions are used. + * If it is a lboard, then the config info of this board will be found + * on the local node. (LOCAL NODE BASE + offset value gives pointer to + * the structure. + * If it is a rboard, the local structure contains the node number + * and the offset of the beginning of the LINKED LIST on the remote node. + * The details of the hardware on a remote node can be built locally, + * if required, by reading the LINKED LIST on the remote node and + * ignoring all the rboards on that node. + * + * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the + * First board info on the remote node. The remote node list is + * traversed as the local list, using the REMOTE BASE ADDRESS and not + * the local base address and ignoring all rboard values. + * + * + KLCONFIG + + +------------+ +------------+ +------------+ +------------+ + | lboard | +-->| lboard | +-->| rboard | +-->| lboard | + +------------+ | +------------+ | +------------+ | +------------+ + | board info | | | board info | | |errinfo,bptr| | | board info | + +------------+ | +------------+ | +------------+ | +------------+ + | offset |--+ | offset |--+ | offset |--+ |offset=NULL | + +------------+ +------------+ +------------+ +------------+ + + + +------------+ + | board info | + +------------+ +--------------------------------+ + | compt 1 |------>| type, rev, diaginfo, size ... | (CPU) + +------------+ +--------------------------------+ + | compt 2 |--+ + +------------+ | +--------------------------------+ + | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK) + +------------+ +--------------------------------+ + | errinfo |--+ + +------------+ | +--------------------------------+ + +--->|r/l brd errinfo,compt err flags | + +--------------------------------+ + + * + * Each BOARD consists of COMPONENTs and the BOARD structure has + * pointers (offsets) to its COMPONENT structure. + * The COMPONENT structure has version info, size and speed info, revision, + * error info and the NIC info. This structure can accommodate any + * BOARD with arbitrary COMPONENT composition. + * + * The ERRORINFO part of each BOARD has error information + * that describes errors about the BOARD itself. It also has flags to + * indicate the COMPONENT(s) on the board that have errors. The error + * information specific to the COMPONENT is present in the respective + * COMPONENT structure. + * + * The ERRORINFO structure is also treated like a COMPONENT, ie. the + * BOARD has pointers(offset) to the ERRORINFO structure. The rboard + * structure also has a pointer to the ERRORINFO structure. This is + * the place to store ERRORINFO about a REMOTE NODE, if the HUB on + * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where + * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can + * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info + * which is present on the REMOTE NODE.(TBD) + * REMOTE ERRINFO can be stored on any of the nearest nodes + * or on all the nearest nodes.(TBD) + * Like BOARD structures, REMOTE ERRINFO structures can be built locally + * using the rboard errinfo pointer. + * + * In order to get useful information from this Data organization, a set of + * interface routines are provided (TBD). The important thing to remember while + * manipulating the structures, is that, the NODE number information should + * be used. If the NODE is non-zero (remote) then each offset should + * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR. + * This includes offsets for BOARDS, COMPONENTS and ERRORINFO. + * + * Note that these structures do not provide much info about connectivity. + * That info will be part of HWGRAPH, which is an extension of the cfg_t + * data structure. (ref IP27prom/cfg.h) It has to be extended to include + * the IO part of the Network(TBD). + * + * The data structures below define the above concepts. + */ + + +/* + * BOARD classes + */ + +#define KLCLASS_MASK 0xf0 +#define KLCLASS_NONE 0x00 +#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */ +#define KLCLASS_CPU KLCLASS_NODE +#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI + and the non-graphics widget boards */ +#define KLCLASS_ROUTER 0x30 /* Router board */ +#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board + so that we can record error info */ +#define KLCLASS_IOBRICK 0x70 /* IP35 iobrick */ +#define KLCLASS_MAX 8 /* Bump this if a new CLASS is added */ + +#define KLCLASS(_x) ((_x) & KLCLASS_MASK) + + +/* + * board types + */ + +#define KLTYPE_MASK 0x0f +#define KLTYPE(_x) ((_x) & KLTYPE_MASK) + +#define KLTYPE_SNIA (KLCLASS_CPU | 0x1) +#define KLTYPE_TIO (KLCLASS_CPU | 0x2) + +#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1) +#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3) +#define KLTYPE_REPEATER_ROUTER (KLCLASS_ROUTER | 0x4) + +#define KLTYPE_IOBRICK_XBOW (KLCLASS_MIDPLANE | 0x2) + +#define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0) +#define KLTYPE_NBRICK (KLCLASS_IOBRICK | 0x4) +#define KLTYPE_PXBRICK (KLCLASS_IOBRICK | 0x6) +#define KLTYPE_IXBRICK (KLCLASS_IOBRICK | 0x7) +#define KLTYPE_CGBRICK (KLCLASS_IOBRICK | 0x8) +#define KLTYPE_OPUSBRICK (KLCLASS_IOBRICK | 0x9) +#define KLTYPE_SABRICK (KLCLASS_IOBRICK | 0xa) +#define KLTYPE_IABRICK (KLCLASS_IOBRICK | 0xb) +#define KLTYPE_PABRICK (KLCLASS_IOBRICK | 0xc) +#define KLTYPE_GABRICK (KLCLASS_IOBRICK | 0xd) + + +/* + * board structures + */ + +#define MAX_COMPTS_PER_BRD 24 + +typedef struct lboard_s { + klconf_off_t brd_next_any; /* Next BOARD */ + unsigned char struct_type; /* type of structure, local or remote */ + unsigned char brd_type; /* type+class */ + unsigned char brd_sversion; /* version of this structure */ + unsigned char brd_brevision; /* board revision */ + unsigned char brd_promver; /* board prom version, if any */ + unsigned char brd_flags; /* Enabled, Disabled etc */ + unsigned char brd_slot; /* slot number */ + unsigned short brd_debugsw; /* Debug switches */ + geoid_t brd_geoid; /* geo id */ + partid_t brd_partition; /* Partition number */ + unsigned short brd_diagval; /* diagnostic value */ + unsigned short brd_diagparm; /* diagnostic parameter */ + unsigned char brd_inventory; /* inventory history */ + unsigned char brd_numcompts; /* Number of components */ + nic_t brd_nic; /* Number in CAN */ + nasid_t brd_nasid; /* passed parameter */ + klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */ + klconf_off_t brd_errinfo; /* Board's error information */ + struct lboard_s *brd_parent; /* Logical parent for this brd */ + char pad0[4]; + unsigned char brd_confidence; /* confidence that the board is bad */ + nasid_t brd_owner; /* who owns this board */ + unsigned char brd_nic_flags; /* To handle 8 more NICs */ + char pad1[24]; /* future expansion */ + char brd_name[32]; + nasid_t brd_next_same_host; /* host of next brd w/same nasid */ + klconf_off_t brd_next_same; /* Next BOARD with same nasid */ +} lboard_t; + +/* + * Generic info structure. This stores common info about a + * component. + */ + +typedef struct klinfo_s { /* Generic info */ + unsigned char struct_type; /* type of this structure */ + unsigned char struct_version; /* version of this structure */ + unsigned char flags; /* Enabled, disabled etc */ + unsigned char revision; /* component revision */ + unsigned short diagval; /* result of diagnostics */ + unsigned short diagparm; /* diagnostic parameter */ + unsigned char inventory; /* previous inventory status */ + unsigned short partid; /* widget part number */ + nic_t nic; /* MUst be aligned properly */ + unsigned char physid; /* physical id of component */ + unsigned int virtid; /* virtual id as seen by system */ + unsigned char widid; /* Widget id - if applicable */ + nasid_t nasid; /* node number - from parent */ + char pad1; /* pad out structure. */ + char pad2; /* pad out structure. */ + void *data; + klconf_off_t errinfo; /* component specific errors */ + unsigned short pad3; /* pci fields have moved over to */ + unsigned short pad4; /* klbri_t */ +} klinfo_t ; + + +static inline lboard_t *find_lboard_next(lboard_t * brd) +{ + if (brd && brd->brd_next_any) + return NODE_OFFSET_TO_LBOARD(NASID_GET(brd), brd->brd_next_any); + return NULL; +} + +#endif /* _ASM_IA64_SN_KLCONFIG_H */ diff --git a/arch/ia64/include/asm/sn/l1.h b/arch/ia64/include/asm/sn/l1.h new file mode 100644 index 00000000000..344bf44bb35 --- /dev/null +++ b/arch/ia64/include/asm/sn/l1.h @@ -0,0 +1,51 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992-1997,2000-2004 Silicon Graphics, Inc. All Rights Reserved. + */ + +#ifndef _ASM_IA64_SN_L1_H +#define _ASM_IA64_SN_L1_H + +/* brick type response codes */ +#define L1_BRICKTYPE_PX 0x23 /* # */ +#define L1_BRICKTYPE_PE 0x25 /* % */ +#define L1_BRICKTYPE_N_p0 0x26 /* & */ +#define L1_BRICKTYPE_IP45 0x34 /* 4 */ +#define L1_BRICKTYPE_IP41 0x35 /* 5 */ +#define L1_BRICKTYPE_TWISTER 0x36 /* 6 */ /* IP53 & ROUTER */ +#define L1_BRICKTYPE_IX 0x3d /* = */ +#define L1_BRICKTYPE_IP34 0x61 /* a */ +#define L1_BRICKTYPE_GA 0x62 /* b */ +#define L1_BRICKTYPE_C 0x63 /* c */ +#define L1_BRICKTYPE_OPUS_TIO 0x66 /* f */ +#define L1_BRICKTYPE_I 0x69 /* i */ +#define L1_BRICKTYPE_N 0x6e /* n */ +#define L1_BRICKTYPE_OPUS 0x6f /* o */ +#define L1_BRICKTYPE_P 0x70 /* p */ +#define L1_BRICKTYPE_R 0x72 /* r */ +#define L1_BRICKTYPE_CHI_CG 0x76 /* v */ +#define L1_BRICKTYPE_X 0x78 /* x */ +#define L1_BRICKTYPE_X2 0x79 /* y */ +#define L1_BRICKTYPE_SA 0x5e /* ^ */ +#define L1_BRICKTYPE_PA 0x6a /* j */ +#define L1_BRICKTYPE_IA 0x6b /* k */ +#define L1_BRICKTYPE_ATHENA 0x2b /* + */ +#define L1_BRICKTYPE_DAYTONA 0x7a /* z */ +#define L1_BRICKTYPE_1932 0x2c /* . */ +#define L1_BRICKTYPE_191010 0x2e /* , */ + +/* board type response codes */ +#define L1_BOARDTYPE_IP69 0x0100 /* CA */ +#define L1_BOARDTYPE_IP63 0x0200 /* CB */ +#define L1_BOARDTYPE_BASEIO 0x0300 /* IB */ +#define L1_BOARDTYPE_PCIE2SLOT 0x0400 /* IC */ +#define L1_BOARDTYPE_PCIX3SLOT 0x0500 /* ID */ +#define L1_BOARDTYPE_PCIXPCIE4SLOT 0x0600 /* IE */ +#define L1_BOARDTYPE_ABACUS 0x0700 /* AB */ +#define L1_BOARDTYPE_DAYTONA 0x0800 /* AD */ +#define L1_BOARDTYPE_INVAL (-1) /* invalid brick type */ + +#endif /* _ASM_IA64_SN_L1_H */ diff --git a/arch/ia64/include/asm/sn/leds.h b/arch/ia64/include/asm/sn/leds.h new file mode 100644 index 00000000000..66cf8c4d92c --- /dev/null +++ b/arch/ia64/include/asm/sn/leds.h @@ -0,0 +1,33 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_LEDS_H +#define _ASM_IA64_SN_LEDS_H + +#include <asm/sn/addrs.h> +#include <asm/sn/pda.h> +#include <asm/sn/shub_mmr.h> + +#define LED0 (LOCAL_MMR_ADDR(SH_REAL_JUNK_BUS_LED0)) +#define LED_CPU_SHIFT 16 + +#define LED_CPU_HEARTBEAT 0x01 +#define LED_CPU_ACTIVITY 0x02 +#define LED_ALWAYS_SET 0x00 + +/* + * Basic macros for flashing the LEDS on an SGI SN. + */ + +static __inline__ void +set_led_bits(u8 value, u8 mask) +{ + pda->led_state = (pda->led_state & ~mask) | (value & mask); + *pda->led_address = (short) pda->led_state; +} + +#endif /* _ASM_IA64_SN_LEDS_H */ + diff --git a/arch/ia64/include/asm/sn/module.h b/arch/ia64/include/asm/sn/module.h new file mode 100644 index 00000000000..734e980ece2 --- /dev/null +++ b/arch/ia64/include/asm/sn/module.h @@ -0,0 +1,127 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_MODULE_H +#define _ASM_IA64_SN_MODULE_H + +/* parameter for format_module_id() */ +#define MODULE_FORMAT_BRIEF 1 +#define MODULE_FORMAT_LONG 2 +#define MODULE_FORMAT_LCD 3 + +/* + * Module id format + * + * 31-16 Rack ID (encoded class, group, number - 16-bit unsigned int) + * 15-8 Brick type (8-bit ascii character) + * 7-0 Bay (brick position in rack (0-63) - 8-bit unsigned int) + * + */ + +/* + * Macros for getting the brick type + */ +#define MODULE_BTYPE_MASK 0xff00 +#define MODULE_BTYPE_SHFT 8 +#define MODULE_GET_BTYPE(_m) (((_m) & MODULE_BTYPE_MASK) >> MODULE_BTYPE_SHFT) +#define MODULE_BT_TO_CHAR(_b) ((char)(_b)) +#define MODULE_GET_BTCHAR(_m) (MODULE_BT_TO_CHAR(MODULE_GET_BTYPE(_m))) + +/* + * Macros for getting the rack ID. + */ +#define MODULE_RACK_MASK 0xffff0000 +#define MODULE_RACK_SHFT 16 +#define MODULE_GET_RACK(_m) (((_m) & MODULE_RACK_MASK) >> MODULE_RACK_SHFT) + +/* + * Macros for getting the brick position + */ +#define MODULE_BPOS_MASK 0x00ff +#define MODULE_BPOS_SHFT 0 +#define MODULE_GET_BPOS(_m) (((_m) & MODULE_BPOS_MASK) >> MODULE_BPOS_SHFT) + +/* + * Macros for encoding and decoding rack IDs + * A rack number consists of three parts: + * class (0==CPU/mixed, 1==I/O), group, number + * + * Rack number is stored just as it is displayed on the screen: + * a 3-decimal-digit number. + */ +#define RACK_CLASS_DVDR 100 +#define RACK_GROUP_DVDR 10 +#define RACK_NUM_DVDR 1 + +#define RACK_CREATE_RACKID(_c, _g, _n) ((_c) * RACK_CLASS_DVDR + \ + (_g) * RACK_GROUP_DVDR + (_n) * RACK_NUM_DVDR) + +#define RACK_GET_CLASS(_r) ((_r) / RACK_CLASS_DVDR) +#define RACK_GET_GROUP(_r) (((_r) - RACK_GET_CLASS(_r) * \ + RACK_CLASS_DVDR) / RACK_GROUP_DVDR) +#define RACK_GET_NUM(_r) (((_r) - RACK_GET_CLASS(_r) * \ + RACK_CLASS_DVDR - RACK_GET_GROUP(_r) * \ + RACK_GROUP_DVDR) / RACK_NUM_DVDR) + +/* + * Macros for encoding and decoding rack IDs + * A rack number consists of three parts: + * class 1 bit, 0==CPU/mixed, 1==I/O + * group 2 bits for CPU/mixed, 3 bits for I/O + * number 3 bits for CPU/mixed, 2 bits for I/O (1 based) + */ +#define RACK_GROUP_BITS(_r) (RACK_GET_CLASS(_r) ? 3 : 2) +#define RACK_NUM_BITS(_r) (RACK_GET_CLASS(_r) ? 2 : 3) + +#define RACK_CLASS_MASK(_r) 0x20 +#define RACK_CLASS_SHFT(_r) 5 +#define RACK_ADD_CLASS(_r, _c) \ + ((_r) |= (_c) << RACK_CLASS_SHFT(_r) & RACK_CLASS_MASK(_r)) + +#define RACK_GROUP_SHFT(_r) RACK_NUM_BITS(_r) +#define RACK_GROUP_MASK(_r) \ + ( (((unsigned)1<<RACK_GROUP_BITS(_r)) - 1) << RACK_GROUP_SHFT(_r) ) +#define RACK_ADD_GROUP(_r, _g) \ + ((_r) |= (_g) << RACK_GROUP_SHFT(_r) & RACK_GROUP_MASK(_r)) + +#define RACK_NUM_SHFT(_r) 0 +#define RACK_NUM_MASK(_r) \ + ( (((unsigned)1<<RACK_NUM_BITS(_r)) - 1) << RACK_NUM_SHFT(_r) ) +#define RACK_ADD_NUM(_r, _n) \ + ((_r) |= ((_n) - 1) << RACK_NUM_SHFT(_r) & RACK_NUM_MASK(_r)) + + +/* + * Brick type definitions + */ +#define MAX_BRICK_TYPES 256 /* brick type is stored as uchar */ + +extern char brick_types[]; + +#define MODULE_CBRICK 0 +#define MODULE_RBRICK 1 +#define MODULE_IBRICK 2 +#define MODULE_KBRICK 3 +#define MODULE_XBRICK 4 +#define MODULE_DBRICK 5 +#define MODULE_PBRICK 6 +#define MODULE_NBRICK 7 +#define MODULE_PEBRICK 8 +#define MODULE_PXBRICK 9 +#define MODULE_IXBRICK 10 +#define MODULE_CGBRICK 11 +#define MODULE_OPUSBRICK 12 +#define MODULE_SABRICK 13 /* TIO BringUp Brick */ +#define MODULE_IABRICK 14 +#define MODULE_PABRICK 15 +#define MODULE_GABRICK 16 +#define MODULE_OPUS_TIO 17 /* OPUS TIO Riser */ + +extern char brick_types[]; +extern void format_module_id(char *, moduleid_t, int); + +#endif /* _ASM_IA64_SN_MODULE_H */ diff --git a/arch/ia64/include/asm/sn/mspec.h b/arch/ia64/include/asm/sn/mspec.h new file mode 100644 index 00000000000..c1d3c50c322 --- /dev/null +++ b/arch/ia64/include/asm/sn/mspec.h @@ -0,0 +1,59 @@ +/* + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2001-2008 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_MSPEC_H +#define _ASM_IA64_SN_MSPEC_H + +#define FETCHOP_VAR_SIZE 64 /* 64 byte per fetchop variable */ + +#define FETCHOP_LOAD 0 +#define FETCHOP_INCREMENT 8 +#define FETCHOP_DECREMENT 16 +#define FETCHOP_CLEAR 24 + +#define FETCHOP_STORE 0 +#define FETCHOP_AND 24 +#define FETCHOP_OR 32 + +#define FETCHOP_CLEAR_CACHE 56 + +#define FETCHOP_LOAD_OP(addr, op) ( \ + *(volatile long *)((char*) (addr) + (op))) + +#define FETCHOP_STORE_OP(addr, op, x) ( \ + *(volatile long *)((char*) (addr) + (op)) = (long) (x)) + +#ifdef __KERNEL__ + +/* + * Each Atomic Memory Operation (amo, formerly known as fetchop) + * variable is 64 bytes long. The first 8 bytes are used. The + * remaining 56 bytes are unaddressable due to the operation taking + * that portion of the address. + * + * NOTE: The amo structure _MUST_ be placed in either the first or second + * half of the cache line. The cache line _MUST NOT_ be used for anything + * other than additional amo entries. This is because there are two + * addresses which reference the same physical cache line. One will + * be a cached entry with the memory type bits all set. This address + * may be loaded into processor cache. The amo will be referenced + * uncached via the memory special memory type. If any portion of the + * cached cache-line is modified, when that line is flushed, it will + * overwrite the uncached value in physical memory and lead to + * inconsistency. + */ +struct amo { + u64 variable; + u64 unused[7]; +}; + + +#endif /* __KERNEL__ */ + +#endif /* _ASM_IA64_SN_MSPEC_H */ diff --git a/arch/ia64/include/asm/sn/nodepda.h b/arch/ia64/include/asm/sn/nodepda.h new file mode 100644 index 00000000000..ee118b901de --- /dev/null +++ b/arch/ia64/include/asm/sn/nodepda.h @@ -0,0 +1,82 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_NODEPDA_H +#define _ASM_IA64_SN_NODEPDA_H + + +#include <asm/irq.h> +#include <asm/sn/arch.h> +#include <asm/sn/intr.h> +#include <asm/sn/bte.h> + +/* + * NUMA Node-Specific Data structures are defined in this file. + * In particular, this is the location of the node PDA. + * A pointer to the right node PDA is saved in each CPU PDA. + */ + +/* + * Node-specific data structure. + * + * One of these structures is allocated on each node of a NUMA system. + * + * This structure provides a convenient way of keeping together + * all per-node data structures. + */ +struct phys_cpuid { + short nasid; + char subnode; + char slice; +}; + +struct nodepda_s { + void *pdinfo; /* Platform-dependent per-node info */ + + /* + * The BTEs on this node are shared by the local cpus + */ + struct bteinfo_s bte_if[MAX_BTES_PER_NODE]; /* Virtual Interface */ + struct timer_list bte_recovery_timer; + spinlock_t bte_recovery_lock; + + /* + * Array of pointers to the nodepdas for each node. + */ + struct nodepda_s *pernode_pdaindr[MAX_COMPACT_NODES]; + + /* + * Array of physical cpu identifiers. Indexed by cpuid. + */ + struct phys_cpuid phys_cpuid[NR_CPUS]; + spinlock_t ptc_lock ____cacheline_aligned_in_smp; +}; + +typedef struct nodepda_s nodepda_t; + +/* + * Access Functions for node PDA. + * Since there is one nodepda for each node, we need a convenient mechanism + * to access these nodepdas without cluttering code with #ifdefs. + * The next set of definitions provides this. + * Routines are expected to use + * + * sn_nodepda - to access node PDA for the node on which code is running + * NODEPDA(cnodeid) - to access node PDA for cnodeid + */ + +DECLARE_PER_CPU(struct nodepda_s *, __sn_nodepda); +#define sn_nodepda (__get_cpu_var(__sn_nodepda)) +#define NODEPDA(cnodeid) (sn_nodepda->pernode_pdaindr[cnodeid]) + +/* + * Check if given a compact node id the corresponding node has all the + * cpus disabled. + */ +#define is_headless_node(cnodeid) (nr_cpus_node(cnodeid) == 0) + +#endif /* _ASM_IA64_SN_NODEPDA_H */ diff --git a/arch/ia64/include/asm/sn/pcibr_provider.h b/arch/ia64/include/asm/sn/pcibr_provider.h new file mode 100644 index 00000000000..da205b7cdaa --- /dev/null +++ b/arch/ia64/include/asm/sn/pcibr_provider.h @@ -0,0 +1,150 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992-1997,2000-2006 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H +#define _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H + +#include <asm/sn/intr.h> +#include <asm/sn/pcibus_provider_defs.h> + +/* Workarounds */ +#define PV907516 (1 << 1) /* TIOCP: Don't write the write buffer flush reg */ + +#define BUSTYPE_MASK 0x1 + +/* Macros given a pcibus structure */ +#define IS_PCIX(ps) ((ps)->pbi_bridge_mode & BUSTYPE_MASK) +#define IS_PCI_BRIDGE_ASIC(asic) (asic == PCIIO_ASIC_TYPE_PIC || \ + asic == PCIIO_ASIC_TYPE_TIOCP) +#define IS_PIC_SOFT(ps) (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_PIC) +#define IS_TIOCP_SOFT(ps) (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_TIOCP) + + +/* + * The different PCI Bridge types supported on the SGI Altix platforms + */ +#define PCIBR_BRIDGETYPE_UNKNOWN -1 +#define PCIBR_BRIDGETYPE_PIC 2 +#define PCIBR_BRIDGETYPE_TIOCP 3 + +/* + * Bridge 64bit Direct Map Attributes + */ +#define PCI64_ATTR_PREF (1ull << 59) +#define PCI64_ATTR_PREC (1ull << 58) +#define PCI64_ATTR_VIRTUAL (1ull << 57) +#define PCI64_ATTR_BAR (1ull << 56) +#define PCI64_ATTR_SWAP (1ull << 55) +#define PCI64_ATTR_VIRTUAL1 (1ull << 54) + +#define PCI32_LOCAL_BASE 0 +#define PCI32_MAPPED_BASE 0x40000000 +#define PCI32_DIRECT_BASE 0x80000000 + +#define IS_PCI32_MAPPED(x) ((u64)(x) < PCI32_DIRECT_BASE && \ + (u64)(x) >= PCI32_MAPPED_BASE) +#define IS_PCI32_DIRECT(x) ((u64)(x) >= PCI32_MAPPED_BASE) + + +/* + * Bridge PMU Address Transaltion Entry Attibutes + */ +#define PCI32_ATE_V (0x1 << 0) +#define PCI32_ATE_CO (0x1 << 1) /* PIC ASIC ONLY */ +#define PCI32_ATE_PIO (0x1 << 1) /* TIOCP ASIC ONLY */ +#define PCI32_ATE_MSI (0x1 << 2) +#define PCI32_ATE_PREF (0x1 << 3) +#define PCI32_ATE_BAR (0x1 << 4) +#define PCI32_ATE_ADDR_SHFT 12 + +#define MINIMAL_ATES_REQUIRED(addr, size) \ + (IOPG(IOPGOFF(addr) + (size) - 1) == IOPG((size) - 1)) + +#define MINIMAL_ATE_FLAG(addr, size) \ + (MINIMAL_ATES_REQUIRED((u64)addr, size) ? 1 : 0) + +/* bit 29 of the pci address is the SWAP bit */ +#define ATE_SWAPSHIFT 29 +#define ATE_SWAP_ON(x) ((x) |= (1 << ATE_SWAPSHIFT)) +#define ATE_SWAP_OFF(x) ((x) &= ~(1 << ATE_SWAPSHIFT)) + +/* + * I/O page size + */ +#if PAGE_SIZE < 16384 +#define IOPFNSHIFT 12 /* 4K per mapped page */ +#else +#define IOPFNSHIFT 14 /* 16K per mapped page */ +#endif + +#define IOPGSIZE (1 << IOPFNSHIFT) +#define IOPG(x) ((x) >> IOPFNSHIFT) +#define IOPGOFF(x) ((x) & (IOPGSIZE-1)) + +#define PCIBR_DEV_SWAP_DIR (1ull << 19) +#define PCIBR_CTRL_PAGE_SIZE (0x1 << 21) + +/* + * PMU resources. + */ +struct ate_resource{ + u64 *ate; + u64 num_ate; + u64 lowest_free_index; +}; + +struct pcibus_info { + struct pcibus_bussoft pbi_buscommon; /* common header */ + u32 pbi_moduleid; + short pbi_bridge_type; + short pbi_bridge_mode; + + struct ate_resource pbi_int_ate_resource; + u64 pbi_int_ate_size; + + u64 pbi_dir_xbase; + char pbi_hub_xid; + + u64 pbi_devreg[8]; + + u32 pbi_valid_devices; + u32 pbi_enabled_devices; + + spinlock_t pbi_lock; +}; + +extern int pcibr_init_provider(void); +extern void *pcibr_bus_fixup(struct pcibus_bussoft *, struct pci_controller *); +extern dma_addr_t pcibr_dma_map(struct pci_dev *, unsigned long, size_t, int type); +extern dma_addr_t pcibr_dma_map_consistent(struct pci_dev *, unsigned long, size_t, int type); +extern void pcibr_dma_unmap(struct pci_dev *, dma_addr_t, int); + +/* + * prototypes for the bridge asic register access routines in pcibr_reg.c + */ +extern void pcireg_control_bit_clr(struct pcibus_info *, u64); +extern void pcireg_control_bit_set(struct pcibus_info *, u64); +extern u64 pcireg_tflush_get(struct pcibus_info *); +extern u64 pcireg_intr_status_get(struct pcibus_info *); +extern void pcireg_intr_enable_bit_clr(struct pcibus_info *, u64); +extern void pcireg_intr_enable_bit_set(struct pcibus_info *, u64); +extern void pcireg_intr_addr_addr_set(struct pcibus_info *, int, u64); +extern void pcireg_force_intr_set(struct pcibus_info *, int); +extern u64 pcireg_wrb_flush_get(struct pcibus_info *, int); +extern void pcireg_int_ate_set(struct pcibus_info *, int, u64); +extern u64 __iomem * pcireg_int_ate_addr(struct pcibus_info *, int); +extern void pcibr_force_interrupt(struct sn_irq_info *sn_irq_info); +extern void pcibr_change_devices_irq(struct sn_irq_info *sn_irq_info); +extern int pcibr_ate_alloc(struct pcibus_info *, int); +extern void pcibr_ate_free(struct pcibus_info *, int); +extern void ate_write(struct pcibus_info *, int, int, u64); +extern int sal_pcibr_slot_enable(struct pcibus_info *soft, int device, + void *resp, char **ssdt); +extern int sal_pcibr_slot_disable(struct pcibus_info *soft, int device, + int action, void *resp); +extern u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus); +#endif diff --git a/arch/ia64/include/asm/sn/pcibus_provider_defs.h b/arch/ia64/include/asm/sn/pcibus_provider_defs.h new file mode 100644 index 00000000000..8f7c83d0f6d --- /dev/null +++ b/arch/ia64/include/asm/sn/pcibus_provider_defs.h @@ -0,0 +1,68 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H +#define _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H + +/* + * SN pci asic types. Do not ever renumber these or reuse values. The + * values must agree with what prom thinks they are. + */ + +#define PCIIO_ASIC_TYPE_UNKNOWN 0 +#define PCIIO_ASIC_TYPE_PPB 1 +#define PCIIO_ASIC_TYPE_PIC 2 +#define PCIIO_ASIC_TYPE_TIOCP 3 +#define PCIIO_ASIC_TYPE_TIOCA 4 +#define PCIIO_ASIC_TYPE_TIOCE 5 + +#define PCIIO_ASIC_MAX_TYPES 6 + +/* + * Common pciio bus provider data. There should be one of these as the + * first field in any pciio based provider soft structure (e.g. pcibr_soft + * tioca_soft, etc). + */ + +struct pcibus_bussoft { + u32 bs_asic_type; /* chipset type */ + u32 bs_xid; /* xwidget id */ + u32 bs_persist_busnum; /* Persistent Bus Number */ + u32 bs_persist_segment; /* Segment Number */ + u64 bs_legacy_io; /* legacy io pio addr */ + u64 bs_legacy_mem; /* legacy mem pio addr */ + u64 bs_base; /* widget base */ + struct xwidget_info *bs_xwidget_info; +}; + +struct pci_controller; +/* + * SN pci bus indirection + */ + +struct sn_pcibus_provider { + dma_addr_t (*dma_map)(struct pci_dev *, unsigned long, size_t, int flags); + dma_addr_t (*dma_map_consistent)(struct pci_dev *, unsigned long, size_t, int flags); + void (*dma_unmap)(struct pci_dev *, dma_addr_t, int); + void * (*bus_fixup)(struct pcibus_bussoft *, struct pci_controller *); + void (*force_interrupt)(struct sn_irq_info *); + void (*target_interrupt)(struct sn_irq_info *); +}; + +/* + * Flags used by the map interfaces + * bits 3:0 specifies format of passed in address + * bit 4 specifies that address is to be used for MSI + */ + +#define SN_DMA_ADDRTYPE(x) ((x) & 0xf) +#define SN_DMA_ADDR_PHYS 1 /* address is an xio address. */ +#define SN_DMA_ADDR_XIO 2 /* address is phys memory */ +#define SN_DMA_MSI 0x10 /* Bus address is to be used for MSI */ + +extern struct sn_pcibus_provider *sn_pci_provider[]; +#endif /* _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H */ diff --git a/arch/ia64/include/asm/sn/pcidev.h b/arch/ia64/include/asm/sn/pcidev.h new file mode 100644 index 00000000000..1c2382cea80 --- /dev/null +++ b/arch/ia64/include/asm/sn/pcidev.h @@ -0,0 +1,85 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_PCI_PCIDEV_H +#define _ASM_IA64_SN_PCI_PCIDEV_H + +#include <linux/pci.h> + +/* + * In ia64, pci_dev->sysdata must be a *pci_controller. To provide access to + * the pcidev_info structs for all devices under a controller, we keep a + * list of pcidev_info under pci_controller->platform_data. + */ +struct sn_platform_data { + void *provider_soft; + struct list_head pcidev_info; +}; + +#define SN_PLATFORM_DATA(busdev) \ + ((struct sn_platform_data *)(PCI_CONTROLLER(busdev)->platform_data)) + +#define SN_PCIDEV_INFO(dev) sn_pcidev_info_get(dev) + +/* + * Given a pci_bus, return the sn pcibus_bussoft struct. Note that + * this only works for root busses, not for busses represented by PPB's. + */ + +#define SN_PCIBUS_BUSSOFT(pci_bus) \ + ((struct pcibus_bussoft *)(SN_PLATFORM_DATA(pci_bus)->provider_soft)) + +#define SN_PCIBUS_BUSSOFT_INFO(pci_bus) \ + ((struct pcibus_info *)(SN_PLATFORM_DATA(pci_bus)->provider_soft)) +/* + * Given a struct pci_dev, return the sn pcibus_bussoft struct. Note + * that this is not equivalent to SN_PCIBUS_BUSSOFT(pci_dev->bus) due + * due to possible PPB's in the path. + */ + +#define SN_PCIDEV_BUSSOFT(pci_dev) \ + (SN_PCIDEV_INFO(pci_dev)->pdi_host_pcidev_info->pdi_pcibus_info) + +#define SN_PCIDEV_BUSPROVIDER(pci_dev) \ + (SN_PCIDEV_INFO(pci_dev)->pdi_provider) + +#define PCIIO_BUS_NONE 255 /* bus 255 reserved */ +#define PCIIO_SLOT_NONE 255 +#define PCIIO_FUNC_NONE 255 +#define PCIIO_VENDOR_ID_NONE (-1) + +struct pcidev_info { + u64 pdi_pio_mapped_addr[7]; /* 6 BARs PLUS 1 ROM */ + u64 pdi_slot_host_handle; /* Bus and devfn Host pci_dev */ + + struct pcibus_bussoft *pdi_pcibus_info; /* Kernel common bus soft */ + struct pcidev_info *pdi_host_pcidev_info; /* Kernel Host pci_dev */ + struct pci_dev *pdi_linux_pcidev; /* Kernel pci_dev */ + + struct sn_irq_info *pdi_sn_irq_info; + struct sn_pcibus_provider *pdi_provider; /* sn pci ops */ + struct pci_dev *host_pci_dev; /* host bus link */ + struct list_head pdi_list; /* List of pcidev_info */ +}; + +extern void sn_irq_fixup(struct pci_dev *pci_dev, + struct sn_irq_info *sn_irq_info); +extern void sn_irq_unfixup(struct pci_dev *pci_dev); +extern struct pcidev_info * sn_pcidev_info_get(struct pci_dev *); +extern void sn_bus_fixup(struct pci_bus *); +extern void sn_acpi_bus_fixup(struct pci_bus *); +extern void sn_common_bus_fixup(struct pci_bus *, struct pcibus_bussoft *); +extern void sn_bus_store_sysdata(struct pci_dev *dev); +extern void sn_bus_free_sysdata(void); +extern void sn_generate_path(struct pci_bus *pci_bus, char *address); +extern void sn_io_slot_fixup(struct pci_dev *); +extern void sn_acpi_slot_fixup(struct pci_dev *); +extern void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *, + struct sn_irq_info *); +extern void sn_pci_unfixup_slot(struct pci_dev *dev); +extern void sn_irq_lh_init(void); +#endif /* _ASM_IA64_SN_PCI_PCIDEV_H */ diff --git a/arch/ia64/include/asm/sn/pda.h b/arch/ia64/include/asm/sn/pda.h new file mode 100644 index 00000000000..1c5108d44d8 --- /dev/null +++ b/arch/ia64/include/asm/sn/pda.h @@ -0,0 +1,69 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_PDA_H +#define _ASM_IA64_SN_PDA_H + +#include <linux/cache.h> +#include <asm/percpu.h> +#include <asm/system.h> + + +/* + * CPU-specific data structure. + * + * One of these structures is allocated for each cpu of a NUMA system. + * + * This structure provides a convenient way of keeping together + * all SN per-cpu data structures. + */ + +typedef struct pda_s { + + /* + * Support for SN LEDs + */ + volatile short *led_address; + u8 led_state; + u8 hb_state; /* supports blinking heartbeat leds */ + unsigned int hb_count; + + unsigned int idle_flag; + + volatile unsigned long *bedrock_rev_id; + volatile unsigned long *pio_write_status_addr; + unsigned long pio_write_status_val; + volatile unsigned long *pio_shub_war_cam_addr; + + unsigned long sn_in_service_ivecs[4]; + int sn_lb_int_war_ticks; + int sn_last_irq; + int sn_first_irq; +} pda_t; + + +#define CACHE_ALIGN(x) (((x) + SMP_CACHE_BYTES-1) & ~(SMP_CACHE_BYTES-1)) + +/* + * PDA + * Per-cpu private data area for each cpu. The PDA is located immediately after + * the IA64 cpu_data area. A full page is allocated for the cp_data area for each + * cpu but only a small amout of the page is actually used. We put the SNIA PDA + * in the same page as the cpu_data area. Note that there is a check in the setup + * code to verify that we don't overflow the page. + * + * Seems like we should should cache-line align the pda so that any changes in the + * size of the cpu_data area don't change cache layout. Should we align to 32, 64, 128 + * or 512 boundary. Each has merits. For now, pick 128 but should be revisited later. + */ +DECLARE_PER_CPU(struct pda_s, pda_percpu); + +#define pda (&__ia64_per_cpu_var(pda_percpu)) + +#define pdacpu(cpu) (&per_cpu(pda_percpu, cpu)) + +#endif /* _ASM_IA64_SN_PDA_H */ diff --git a/arch/ia64/include/asm/sn/pic.h b/arch/ia64/include/asm/sn/pic.h new file mode 100644 index 00000000000..5f9da5fd6e5 --- /dev/null +++ b/arch/ia64/include/asm/sn/pic.h @@ -0,0 +1,261 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2003 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_PCI_PIC_H +#define _ASM_IA64_SN_PCI_PIC_H + +/* + * PIC AS DEVICE ZERO + * ------------------ + * + * PIC handles PCI/X busses. PCI/X requires that the 'bridge' (i.e. PIC) + * be designated as 'device 0'. That is a departure from earlier SGI + * PCI bridges. Because of that we use config space 1 to access the + * config space of the first actual PCI device on the bus. + * Here's what the PIC manual says: + * + * The current PCI-X bus specification now defines that the parent + * hosts bus bridge (PIC for example) must be device 0 on bus 0. PIC + * reduced the total number of devices from 8 to 4 and removed the + * device registers and windows, now only supporting devices 0,1,2, and + * 3. PIC did leave all 8 configuration space windows. The reason was + * there was nothing to gain by removing them. Here in lies the problem. + * The device numbering we do using 0 through 3 is unrelated to the device + * numbering which PCI-X requires in configuration space. In the past we + * correlated Configs pace and our device space 0 <-> 0, 1 <-> 1, etc. + * PCI-X requires we start a 1, not 0 and currently the PX brick + * does associate our: + * + * device 0 with configuration space window 1, + * device 1 with configuration space window 2, + * device 2 with configuration space window 3, + * device 3 with configuration space window 4. + * + * The net effect is that all config space access are off-by-one with + * relation to other per-slot accesses on the PIC. + * Here is a table that shows some of that: + * + * Internal Slot# + * | + * | 0 1 2 3 + * ----------|--------------------------------------- + * config | 0x21000 0x22000 0x23000 0x24000 + * | + * even rrb | 0[0] n/a 1[0] n/a [] == implied even/odd + * | + * odd rrb | n/a 0[1] n/a 1[1] + * | + * int dev | 00 01 10 11 + * | + * ext slot# | 1 2 3 4 + * ----------|--------------------------------------- + */ + +#define PIC_ATE_TARGETID_SHFT 8 +#define PIC_HOST_INTR_ADDR 0x0000FFFFFFFFFFFFUL +#define PIC_PCI64_ATTR_TARG_SHFT 60 + + +/***************************************************************************** + *********************** PIC MMR structure mapping *************************** + *****************************************************************************/ + +/* NOTE: PIC WAR. PV#854697. PIC does not allow writes just to [31:0] + * of a 64-bit register. When writing PIC registers, always write the + * entire 64 bits. + */ + +struct pic { + + /* 0x000000-0x00FFFF -- Local Registers */ + + /* 0x000000-0x000057 -- Standard Widget Configuration */ + u64 p_wid_id; /* 0x000000 */ + u64 p_wid_stat; /* 0x000008 */ + u64 p_wid_err_upper; /* 0x000010 */ + u64 p_wid_err_lower; /* 0x000018 */ + #define p_wid_err p_wid_err_lower + u64 p_wid_control; /* 0x000020 */ + u64 p_wid_req_timeout; /* 0x000028 */ + u64 p_wid_int_upper; /* 0x000030 */ + u64 p_wid_int_lower; /* 0x000038 */ + #define p_wid_int p_wid_int_lower + u64 p_wid_err_cmdword; /* 0x000040 */ + u64 p_wid_llp; /* 0x000048 */ + u64 p_wid_tflush; /* 0x000050 */ + + /* 0x000058-0x00007F -- Bridge-specific Widget Configuration */ + u64 p_wid_aux_err; /* 0x000058 */ + u64 p_wid_resp_upper; /* 0x000060 */ + u64 p_wid_resp_lower; /* 0x000068 */ + #define p_wid_resp p_wid_resp_lower + u64 p_wid_tst_pin_ctrl; /* 0x000070 */ + u64 p_wid_addr_lkerr; /* 0x000078 */ + + /* 0x000080-0x00008F -- PMU & MAP */ + u64 p_dir_map; /* 0x000080 */ + u64 _pad_000088; /* 0x000088 */ + + /* 0x000090-0x00009F -- SSRAM */ + u64 p_map_fault; /* 0x000090 */ + u64 _pad_000098; /* 0x000098 */ + + /* 0x0000A0-0x0000AF -- Arbitration */ + u64 p_arb; /* 0x0000A0 */ + u64 _pad_0000A8; /* 0x0000A8 */ + + /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */ + u64 p_ate_parity_err; /* 0x0000B0 */ + u64 _pad_0000B8; /* 0x0000B8 */ + + /* 0x0000C0-0x0000FF -- PCI/GIO */ + u64 p_bus_timeout; /* 0x0000C0 */ + u64 p_pci_cfg; /* 0x0000C8 */ + u64 p_pci_err_upper; /* 0x0000D0 */ + u64 p_pci_err_lower; /* 0x0000D8 */ + #define p_pci_err p_pci_err_lower + u64 _pad_0000E0[4]; /* 0x0000{E0..F8} */ + + /* 0x000100-0x0001FF -- Interrupt */ + u64 p_int_status; /* 0x000100 */ + u64 p_int_enable; /* 0x000108 */ + u64 p_int_rst_stat; /* 0x000110 */ + u64 p_int_mode; /* 0x000118 */ + u64 p_int_device; /* 0x000120 */ + u64 p_int_host_err; /* 0x000128 */ + u64 p_int_addr[8]; /* 0x0001{30,,,68} */ + u64 p_err_int_view; /* 0x000170 */ + u64 p_mult_int; /* 0x000178 */ + u64 p_force_always[8]; /* 0x0001{80,,,B8} */ + u64 p_force_pin[8]; /* 0x0001{C0,,,F8} */ + + /* 0x000200-0x000298 -- Device */ + u64 p_device[4]; /* 0x0002{00,,,18} */ + u64 _pad_000220[4]; /* 0x0002{20,,,38} */ + u64 p_wr_req_buf[4]; /* 0x0002{40,,,58} */ + u64 _pad_000260[4]; /* 0x0002{60,,,78} */ + u64 p_rrb_map[2]; /* 0x0002{80,,,88} */ + #define p_even_resp p_rrb_map[0] /* 0x000280 */ + #define p_odd_resp p_rrb_map[1] /* 0x000288 */ + u64 p_resp_status; /* 0x000290 */ + u64 p_resp_clear; /* 0x000298 */ + + u64 _pad_0002A0[12]; /* 0x0002{A0..F8} */ + + /* 0x000300-0x0003F8 -- Buffer Address Match Registers */ + struct { + u64 upper; /* 0x0003{00,,,F0} */ + u64 lower; /* 0x0003{08,,,F8} */ + } p_buf_addr_match[16]; + + /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */ + struct { + u64 flush_w_touch; /* 0x000{400,,,5C0} */ + u64 flush_wo_touch; /* 0x000{408,,,5C8} */ + u64 inflight; /* 0x000{410,,,5D0} */ + u64 prefetch; /* 0x000{418,,,5D8} */ + u64 total_pci_retry; /* 0x000{420,,,5E0} */ + u64 max_pci_retry; /* 0x000{428,,,5E8} */ + u64 max_latency; /* 0x000{430,,,5F0} */ + u64 clear_all; /* 0x000{438,,,5F8} */ + } p_buf_count[8]; + + + /* 0x000600-0x0009FF -- PCI/X registers */ + u64 p_pcix_bus_err_addr; /* 0x000600 */ + u64 p_pcix_bus_err_attr; /* 0x000608 */ + u64 p_pcix_bus_err_data; /* 0x000610 */ + u64 p_pcix_pio_split_addr; /* 0x000618 */ + u64 p_pcix_pio_split_attr; /* 0x000620 */ + u64 p_pcix_dma_req_err_attr; /* 0x000628 */ + u64 p_pcix_dma_req_err_addr; /* 0x000630 */ + u64 p_pcix_timeout; /* 0x000638 */ + + u64 _pad_000640[120]; /* 0x000{640,,,9F8} */ + + /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */ + struct { + u64 p_buf_addr; /* 0x000{A00,,,AF0} */ + u64 p_buf_attr; /* 0X000{A08,,,AF8} */ + } p_pcix_read_buf_64[16]; + + struct { + u64 p_buf_addr; /* 0x000{B00,,,BE0} */ + u64 p_buf_attr; /* 0x000{B08,,,BE8} */ + u64 p_buf_valid; /* 0x000{B10,,,BF0} */ + u64 __pad1; /* 0x000{B18,,,BF8} */ + } p_pcix_write_buf_64[8]; + + /* End of Local Registers -- Start of Address Map space */ + + char _pad_000c00[0x010000 - 0x000c00]; + + /* 0x010000-0x011fff -- Internal ATE RAM (Auto Parity Generation) */ + u64 p_int_ate_ram[1024]; /* 0x010000-0x011fff */ + + /* 0x012000-0x013fff -- Internal ATE RAM (Manual Parity Generation) */ + u64 p_int_ate_ram_mp[1024]; /* 0x012000-0x013fff */ + + char _pad_014000[0x18000 - 0x014000]; + + /* 0x18000-0x197F8 -- PIC Write Request Ram */ + u64 p_wr_req_lower[256]; /* 0x18000 - 0x187F8 */ + u64 p_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */ + u64 p_wr_req_parity[256]; /* 0x19000 - 0x197F8 */ + + char _pad_019800[0x20000 - 0x019800]; + + /* 0x020000-0x027FFF -- PCI Device Configuration Spaces */ + union { + u8 c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */ + u16 s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */ + u32 l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */ + u64 d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */ + union { + u8 c[0x100 / 1]; + u16 s[0x100 / 2]; + u32 l[0x100 / 4]; + u64 d[0x100 / 8]; + } f[8]; + } p_type0_cfg_dev[8]; /* 0x02{0000,,,7FFF} */ + + /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */ + union { + u8 c[0x1000 / 1]; /* 0x028000-0x029000 */ + u16 s[0x1000 / 2]; /* 0x028000-0x029000 */ + u32 l[0x1000 / 4]; /* 0x028000-0x029000 */ + u64 d[0x1000 / 8]; /* 0x028000-0x029000 */ + union { + u8 c[0x100 / 1]; + u16 s[0x100 / 2]; + u32 l[0x100 / 4]; + u64 d[0x100 / 8]; + } f[8]; + } p_type1_cfg; /* 0x028000-0x029000 */ + + char _pad_029000[0x030000-0x029000]; + + /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */ + union { + u8 c[8 / 1]; + u16 s[8 / 2]; + u32 l[8 / 4]; + u64 d[8 / 8]; + } p_pci_iack; /* 0x030000-0x030007 */ + + char _pad_030007[0x040000-0x030008]; + + /* 0x040000-0x030007 -- PCIX Special Cycle */ + union { + u8 c[8 / 1]; + u16 s[8 / 2]; + u32 l[8 / 4]; + u64 d[8 / 8]; + } p_pcix_cycle; /* 0x040000-0x040007 */ +}; + +#endif /* _ASM_IA64_SN_PCI_PIC_H */ diff --git a/arch/ia64/include/asm/sn/rw_mmr.h b/arch/ia64/include/asm/sn/rw_mmr.h new file mode 100644 index 00000000000..2d78f4c5a45 --- /dev/null +++ b/arch/ia64/include/asm/sn/rw_mmr.h @@ -0,0 +1,28 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002-2006 Silicon Graphics, Inc. All Rights Reserved. + */ +#ifndef _ASM_IA64_SN_RW_MMR_H +#define _ASM_IA64_SN_RW_MMR_H + + +/* + * This file that access MMRs via uncached physical addresses. + * pio_phys_read_mmr - read an MMR + * pio_phys_write_mmr - write an MMR + * pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0 + * Second MMR will be skipped if address is NULL + * + * Addresses passed to these routines should be uncached physical addresses + * ie., 0x80000.... + */ + + +extern long pio_phys_read_mmr(volatile long *mmr); +extern void pio_phys_write_mmr(volatile long *mmr, long val); +extern void pio_atomic_phys_write_mmrs(volatile long *mmr1, long val1, volatile long *mmr2, long val2); + +#endif /* _ASM_IA64_SN_RW_MMR_H */ diff --git a/arch/ia64/include/asm/sn/shub_mmr.h b/arch/ia64/include/asm/sn/shub_mmr.h new file mode 100644 index 00000000000..7de1d1d4b71 --- /dev/null +++ b/arch/ia64/include/asm/sn/shub_mmr.h @@ -0,0 +1,502 @@ +/* + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2001-2005 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_SHUB_MMR_H +#define _ASM_IA64_SN_SHUB_MMR_H + +/* ==================================================================== */ +/* Register "SH_IPI_INT" */ +/* SHub Inter-Processor Interrupt Registers */ +/* ==================================================================== */ +#define SH1_IPI_INT __IA64_UL_CONST(0x0000000110000380) +#define SH2_IPI_INT __IA64_UL_CONST(0x0000000010000380) + +/* SH_IPI_INT_TYPE */ +/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */ +#define SH_IPI_INT_TYPE_SHFT 0 +#define SH_IPI_INT_TYPE_MASK __IA64_UL_CONST(0x0000000000000007) + +/* SH_IPI_INT_AGT */ +/* Description: Agent, must be 0 for SHub */ +#define SH_IPI_INT_AGT_SHFT 3 +#define SH_IPI_INT_AGT_MASK __IA64_UL_CONST(0x0000000000000008) + +/* SH_IPI_INT_PID */ +/* Description: Processor ID, same setting as on targeted McKinley */ +#define SH_IPI_INT_PID_SHFT 4 +#define SH_IPI_INT_PID_MASK __IA64_UL_CONST(0x00000000000ffff0) + +/* SH_IPI_INT_BASE */ +/* Description: Optional interrupt vector area, 2MB aligned */ +#define SH_IPI_INT_BASE_SHFT 21 +#define SH_IPI_INT_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000) + +/* SH_IPI_INT_IDX */ +/* Description: Targeted McKinley interrupt vector */ +#define SH_IPI_INT_IDX_SHFT 52 +#define SH_IPI_INT_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000) + +/* SH_IPI_INT_SEND */ +/* Description: Send Interrupt Message to PI, This generates a puls */ +#define SH_IPI_INT_SEND_SHFT 63 +#define SH_IPI_INT_SEND_MASK __IA64_UL_CONST(0x8000000000000000) + +/* ==================================================================== */ +/* Register "SH_EVENT_OCCURRED" */ +/* SHub Interrupt Event Occurred */ +/* ==================================================================== */ +#define SH1_EVENT_OCCURRED __IA64_UL_CONST(0x0000000110010000) +#define SH1_EVENT_OCCURRED_ALIAS __IA64_UL_CONST(0x0000000110010008) +#define SH2_EVENT_OCCURRED __IA64_UL_CONST(0x0000000010010000) +#define SH2_EVENT_OCCURRED_ALIAS __IA64_UL_CONST(0x0000000010010008) + +/* ==================================================================== */ +/* Register "SH_PI_CAM_CONTROL" */ +/* CRB CAM MMR Access Control */ +/* ==================================================================== */ +#define SH1_PI_CAM_CONTROL __IA64_UL_CONST(0x0000000120050300) + +/* ==================================================================== */ +/* Register "SH_SHUB_ID" */ +/* SHub ID Number */ +/* ==================================================================== */ +#define SH1_SHUB_ID __IA64_UL_CONST(0x0000000110060580) +#define SH1_SHUB_ID_REVISION_SHFT 28 +#define SH1_SHUB_ID_REVISION_MASK __IA64_UL_CONST(0x00000000f0000000) + +/* ==================================================================== */ +/* Register "SH_RTC" */ +/* Real-time Clock */ +/* ==================================================================== */ +#define SH1_RTC __IA64_UL_CONST(0x00000001101c0000) +#define SH2_RTC __IA64_UL_CONST(0x00000002101c0000) +#define SH_RTC_MASK __IA64_UL_CONST(0x007fffffffffffff) + +/* ==================================================================== */ +/* Register "SH_PIO_WRITE_STATUS_0|1" */ +/* PIO Write Status for CPU 0 & 1 */ +/* ==================================================================== */ +#define SH1_PIO_WRITE_STATUS_0 __IA64_UL_CONST(0x0000000120070200) +#define SH1_PIO_WRITE_STATUS_1 __IA64_UL_CONST(0x0000000120070280) +#define SH2_PIO_WRITE_STATUS_0 __IA64_UL_CONST(0x0000000020070200) +#define SH2_PIO_WRITE_STATUS_1 __IA64_UL_CONST(0x0000000020070280) +#define SH2_PIO_WRITE_STATUS_2 __IA64_UL_CONST(0x0000000020070300) +#define SH2_PIO_WRITE_STATUS_3 __IA64_UL_CONST(0x0000000020070380) + +/* SH_PIO_WRITE_STATUS_0_WRITE_DEADLOCK */ +/* Description: Deadlock response detected */ +#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT 1 +#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK \ + __IA64_UL_CONST(0x0000000000000002) + +/* SH_PIO_WRITE_STATUS_0_PENDING_WRITE_COUNT */ +/* Description: Count of currently pending PIO writes */ +#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT 56 +#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK \ + __IA64_UL_CONST(0x3f00000000000000) + +/* ==================================================================== */ +/* Register "SH_PIO_WRITE_STATUS_0_ALIAS" */ +/* ==================================================================== */ +#define SH1_PIO_WRITE_STATUS_0_ALIAS __IA64_UL_CONST(0x0000000120070208) +#define SH2_PIO_WRITE_STATUS_0_ALIAS __IA64_UL_CONST(0x0000000020070208) + +/* ==================================================================== */ +/* Register "SH_EVENT_OCCURRED" */ +/* SHub Interrupt Event Occurred */ +/* ==================================================================== */ +/* SH_EVENT_OCCURRED_UART_INT */ +/* Description: Pending Junk Bus UART Interrupt */ +#define SH_EVENT_OCCURRED_UART_INT_SHFT 20 +#define SH_EVENT_OCCURRED_UART_INT_MASK __IA64_UL_CONST(0x0000000000100000) + +/* SH_EVENT_OCCURRED_IPI_INT */ +/* Description: Pending IPI Interrupt */ +#define SH_EVENT_OCCURRED_IPI_INT_SHFT 28 +#define SH_EVENT_OCCURRED_IPI_INT_MASK __IA64_UL_CONST(0x0000000010000000) + +/* SH_EVENT_OCCURRED_II_INT0 */ +/* Description: Pending II 0 Interrupt */ +#define SH_EVENT_OCCURRED_II_INT0_SHFT 29 +#define SH_EVENT_OCCURRED_II_INT0_MASK __IA64_UL_CONST(0x0000000020000000) + +/* SH_EVENT_OCCURRED_II_INT1 */ +/* Description: Pending II 1 Interrupt */ +#define SH_EVENT_OCCURRED_II_INT1_SHFT 30 +#define SH_EVENT_OCCURRED_II_INT1_MASK __IA64_UL_CONST(0x0000000040000000) + +/* SH2_EVENT_OCCURRED_EXTIO_INT2 */ +/* Description: Pending SHUB 2 EXT IO INT2 */ +#define SH2_EVENT_OCCURRED_EXTIO_INT2_SHFT 33 +#define SH2_EVENT_OCCURRED_EXTIO_INT2_MASK __IA64_UL_CONST(0x0000000200000000) + +/* SH2_EVENT_OCCURRED_EXTIO_INT3 */ +/* Description: Pending SHUB 2 EXT IO INT3 */ +#define SH2_EVENT_OCCURRED_EXTIO_INT3_SHFT 34 +#define SH2_EVENT_OCCURRED_EXTIO_INT3_MASK __IA64_UL_CONST(0x0000000400000000) + +#define SH_ALL_INT_MASK \ + (SH_EVENT_OCCURRED_UART_INT_MASK | SH_EVENT_OCCURRED_IPI_INT_MASK | \ + SH_EVENT_OCCURRED_II_INT0_MASK | SH_EVENT_OCCURRED_II_INT1_MASK | \ + SH_EVENT_OCCURRED_II_INT1_MASK | SH2_EVENT_OCCURRED_EXTIO_INT2_MASK | \ + SH2_EVENT_OCCURRED_EXTIO_INT3_MASK) + + +/* ==================================================================== */ +/* LEDS */ +/* ==================================================================== */ +#define SH1_REAL_JUNK_BUS_LED0 0x7fed00000UL +#define SH1_REAL_JUNK_BUS_LED1 0x7fed10000UL +#define SH1_REAL_JUNK_BUS_LED2 0x7fed20000UL +#define SH1_REAL_JUNK_BUS_LED3 0x7fed30000UL + +#define SH2_REAL_JUNK_BUS_LED0 0xf0000000UL +#define SH2_REAL_JUNK_BUS_LED1 0xf0010000UL +#define SH2_REAL_JUNK_BUS_LED2 0xf0020000UL +#define SH2_REAL_JUNK_BUS_LED3 0xf0030000UL + +/* ==================================================================== */ +/* Register "SH1_PTC_0" */ +/* Puge Translation Cache Message Configuration Information */ +/* ==================================================================== */ +#define SH1_PTC_0 __IA64_UL_CONST(0x00000001101a0000) + +/* SH1_PTC_0_A */ +/* Description: Type */ +#define SH1_PTC_0_A_SHFT 0 + +/* SH1_PTC_0_PS */ +/* Description: Page Size */ +#define SH1_PTC_0_PS_SHFT 2 + +/* SH1_PTC_0_RID */ +/* Description: Region ID */ +#define SH1_PTC_0_RID_SHFT 8 + +/* SH1_PTC_0_START */ +/* Description: Start */ +#define SH1_PTC_0_START_SHFT 63 + +/* ==================================================================== */ +/* Register "SH1_PTC_1" */ +/* Puge Translation Cache Message Configuration Information */ +/* ==================================================================== */ +#define SH1_PTC_1 __IA64_UL_CONST(0x00000001101a0080) + +/* SH1_PTC_1_START */ +/* Description: PTC_1 Start */ +#define SH1_PTC_1_START_SHFT 63 + +/* ==================================================================== */ +/* Register "SH2_PTC" */ +/* Puge Translation Cache Message Configuration Information */ +/* ==================================================================== */ +#define SH2_PTC __IA64_UL_CONST(0x0000000170000000) + +/* SH2_PTC_A */ +/* Description: Type */ +#define SH2_PTC_A_SHFT 0 + +/* SH2_PTC_PS */ +/* Description: Page Size */ +#define SH2_PTC_PS_SHFT 2 + +/* SH2_PTC_RID */ +/* Description: Region ID */ +#define SH2_PTC_RID_SHFT 4 + +/* SH2_PTC_START */ +/* Description: Start */ +#define SH2_PTC_START_SHFT 63 + +/* SH2_PTC_ADDR_RID */ +/* Description: Region ID */ +#define SH2_PTC_ADDR_SHFT 4 +#define SH2_PTC_ADDR_MASK __IA64_UL_CONST(0x1ffffffffffff000) + +/* ==================================================================== */ +/* Register "SH_RTC1_INT_CONFIG" */ +/* SHub RTC 1 Interrupt Config Registers */ +/* ==================================================================== */ + +#define SH1_RTC1_INT_CONFIG __IA64_UL_CONST(0x0000000110001480) +#define SH2_RTC1_INT_CONFIG __IA64_UL_CONST(0x0000000010001480) +#define SH_RTC1_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff) +#define SH_RTC1_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_RTC1_INT_CONFIG_TYPE */ +/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */ +#define SH_RTC1_INT_CONFIG_TYPE_SHFT 0 +#define SH_RTC1_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007) + +/* SH_RTC1_INT_CONFIG_AGT */ +/* Description: Agent, must be 0 for SHub */ +#define SH_RTC1_INT_CONFIG_AGT_SHFT 3 +#define SH_RTC1_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008) + +/* SH_RTC1_INT_CONFIG_PID */ +/* Description: Processor ID, same setting as on targeted McKinley */ +#define SH_RTC1_INT_CONFIG_PID_SHFT 4 +#define SH_RTC1_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0) + +/* SH_RTC1_INT_CONFIG_BASE */ +/* Description: Optional interrupt vector area, 2MB aligned */ +#define SH_RTC1_INT_CONFIG_BASE_SHFT 21 +#define SH_RTC1_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000) + +/* SH_RTC1_INT_CONFIG_IDX */ +/* Description: Targeted McKinley interrupt vector */ +#define SH_RTC1_INT_CONFIG_IDX_SHFT 52 +#define SH_RTC1_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000) + +/* ==================================================================== */ +/* Register "SH_RTC1_INT_ENABLE" */ +/* SHub RTC 1 Interrupt Enable Registers */ +/* ==================================================================== */ + +#define SH1_RTC1_INT_ENABLE __IA64_UL_CONST(0x0000000110001500) +#define SH2_RTC1_INT_ENABLE __IA64_UL_CONST(0x0000000010001500) +#define SH_RTC1_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001) +#define SH_RTC1_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_RTC1_INT_ENABLE_RTC1_ENABLE */ +/* Description: Enable RTC 1 Interrupt */ +#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT 0 +#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK \ + __IA64_UL_CONST(0x0000000000000001) + +/* ==================================================================== */ +/* Register "SH_RTC2_INT_CONFIG" */ +/* SHub RTC 2 Interrupt Config Registers */ +/* ==================================================================== */ + +#define SH1_RTC2_INT_CONFIG __IA64_UL_CONST(0x0000000110001580) +#define SH2_RTC2_INT_CONFIG __IA64_UL_CONST(0x0000000010001580) +#define SH_RTC2_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff) +#define SH_RTC2_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_RTC2_INT_CONFIG_TYPE */ +/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */ +#define SH_RTC2_INT_CONFIG_TYPE_SHFT 0 +#define SH_RTC2_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007) + +/* SH_RTC2_INT_CONFIG_AGT */ +/* Description: Agent, must be 0 for SHub */ +#define SH_RTC2_INT_CONFIG_AGT_SHFT 3 +#define SH_RTC2_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008) + +/* SH_RTC2_INT_CONFIG_PID */ +/* Description: Processor ID, same setting as on targeted McKinley */ +#define SH_RTC2_INT_CONFIG_PID_SHFT 4 +#define SH_RTC2_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0) + +/* SH_RTC2_INT_CONFIG_BASE */ +/* Description: Optional interrupt vector area, 2MB aligned */ +#define SH_RTC2_INT_CONFIG_BASE_SHFT 21 +#define SH_RTC2_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000) + +/* SH_RTC2_INT_CONFIG_IDX */ +/* Description: Targeted McKinley interrupt vector */ +#define SH_RTC2_INT_CONFIG_IDX_SHFT 52 +#define SH_RTC2_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000) + +/* ==================================================================== */ +/* Register "SH_RTC2_INT_ENABLE" */ +/* SHub RTC 2 Interrupt Enable Registers */ +/* ==================================================================== */ + +#define SH1_RTC2_INT_ENABLE __IA64_UL_CONST(0x0000000110001600) +#define SH2_RTC2_INT_ENABLE __IA64_UL_CONST(0x0000000010001600) +#define SH_RTC2_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001) +#define SH_RTC2_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_RTC2_INT_ENABLE_RTC2_ENABLE */ +/* Description: Enable RTC 2 Interrupt */ +#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT 0 +#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK \ + __IA64_UL_CONST(0x0000000000000001) + +/* ==================================================================== */ +/* Register "SH_RTC3_INT_CONFIG" */ +/* SHub RTC 3 Interrupt Config Registers */ +/* ==================================================================== */ + +#define SH1_RTC3_INT_CONFIG __IA64_UL_CONST(0x0000000110001680) +#define SH2_RTC3_INT_CONFIG __IA64_UL_CONST(0x0000000010001680) +#define SH_RTC3_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff) +#define SH_RTC3_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_RTC3_INT_CONFIG_TYPE */ +/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */ +#define SH_RTC3_INT_CONFIG_TYPE_SHFT 0 +#define SH_RTC3_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007) + +/* SH_RTC3_INT_CONFIG_AGT */ +/* Description: Agent, must be 0 for SHub */ +#define SH_RTC3_INT_CONFIG_AGT_SHFT 3 +#define SH_RTC3_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008) + +/* SH_RTC3_INT_CONFIG_PID */ +/* Description: Processor ID, same setting as on targeted McKinley */ +#define SH_RTC3_INT_CONFIG_PID_SHFT 4 +#define SH_RTC3_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0) + +/* SH_RTC3_INT_CONFIG_BASE */ +/* Description: Optional interrupt vector area, 2MB aligned */ +#define SH_RTC3_INT_CONFIG_BASE_SHFT 21 +#define SH_RTC3_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000) + +/* SH_RTC3_INT_CONFIG_IDX */ +/* Description: Targeted McKinley interrupt vector */ +#define SH_RTC3_INT_CONFIG_IDX_SHFT 52 +#define SH_RTC3_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000) + +/* ==================================================================== */ +/* Register "SH_RTC3_INT_ENABLE" */ +/* SHub RTC 3 Interrupt Enable Registers */ +/* ==================================================================== */ + +#define SH1_RTC3_INT_ENABLE __IA64_UL_CONST(0x0000000110001700) +#define SH2_RTC3_INT_ENABLE __IA64_UL_CONST(0x0000000010001700) +#define SH_RTC3_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001) +#define SH_RTC3_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_RTC3_INT_ENABLE_RTC3_ENABLE */ +/* Description: Enable RTC 3 Interrupt */ +#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT 0 +#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK \ + __IA64_UL_CONST(0x0000000000000001) + +/* SH_EVENT_OCCURRED_RTC1_INT */ +/* Description: Pending RTC 1 Interrupt */ +#define SH_EVENT_OCCURRED_RTC1_INT_SHFT 24 +#define SH_EVENT_OCCURRED_RTC1_INT_MASK __IA64_UL_CONST(0x0000000001000000) + +/* SH_EVENT_OCCURRED_RTC2_INT */ +/* Description: Pending RTC 2 Interrupt */ +#define SH_EVENT_OCCURRED_RTC2_INT_SHFT 25 +#define SH_EVENT_OCCURRED_RTC2_INT_MASK __IA64_UL_CONST(0x0000000002000000) + +/* SH_EVENT_OCCURRED_RTC3_INT */ +/* Description: Pending RTC 3 Interrupt */ +#define SH_EVENT_OCCURRED_RTC3_INT_SHFT 26 +#define SH_EVENT_OCCURRED_RTC3_INT_MASK __IA64_UL_CONST(0x0000000004000000) + +/* ==================================================================== */ +/* Register "SH_IPI_ACCESS" */ +/* CPU interrupt Access Permission Bits */ +/* ==================================================================== */ + +#define SH1_IPI_ACCESS __IA64_UL_CONST(0x0000000110060480) +#define SH2_IPI_ACCESS0 __IA64_UL_CONST(0x0000000010060c00) +#define SH2_IPI_ACCESS1 __IA64_UL_CONST(0x0000000010060c80) +#define SH2_IPI_ACCESS2 __IA64_UL_CONST(0x0000000010060d00) +#define SH2_IPI_ACCESS3 __IA64_UL_CONST(0x0000000010060d80) + +/* ==================================================================== */ +/* Register "SH_INT_CMPB" */ +/* RTC Compare Value for Processor B */ +/* ==================================================================== */ + +#define SH1_INT_CMPB __IA64_UL_CONST(0x00000001101b0080) +#define SH2_INT_CMPB __IA64_UL_CONST(0x00000000101b0080) +#define SH_INT_CMPB_MASK __IA64_UL_CONST(0x007fffffffffffff) +#define SH_INT_CMPB_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_INT_CMPB_REAL_TIME_CMPB */ +/* Description: Real Time Clock Compare */ +#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT 0 +#define SH_INT_CMPB_REAL_TIME_CMPB_MASK __IA64_UL_CONST(0x007fffffffffffff) + +/* ==================================================================== */ +/* Register "SH_INT_CMPC" */ +/* RTC Compare Value for Processor C */ +/* ==================================================================== */ + +#define SH1_INT_CMPC __IA64_UL_CONST(0x00000001101b0100) +#define SH2_INT_CMPC __IA64_UL_CONST(0x00000000101b0100) +#define SH_INT_CMPC_MASK __IA64_UL_CONST(0x007fffffffffffff) +#define SH_INT_CMPC_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_INT_CMPC_REAL_TIME_CMPC */ +/* Description: Real Time Clock Compare */ +#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT 0 +#define SH_INT_CMPC_REAL_TIME_CMPC_MASK __IA64_UL_CONST(0x007fffffffffffff) + +/* ==================================================================== */ +/* Register "SH_INT_CMPD" */ +/* RTC Compare Value for Processor D */ +/* ==================================================================== */ + +#define SH1_INT_CMPD __IA64_UL_CONST(0x00000001101b0180) +#define SH2_INT_CMPD __IA64_UL_CONST(0x00000000101b0180) +#define SH_INT_CMPD_MASK __IA64_UL_CONST(0x007fffffffffffff) +#define SH_INT_CMPD_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_INT_CMPD_REAL_TIME_CMPD */ +/* Description: Real Time Clock Compare */ +#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT 0 +#define SH_INT_CMPD_REAL_TIME_CMPD_MASK __IA64_UL_CONST(0x007fffffffffffff) + +/* ==================================================================== */ +/* Register "SH_MD_DQLP_MMR_DIR_PRIVEC0" */ +/* privilege vector for acc=0 */ +/* ==================================================================== */ +#define SH1_MD_DQLP_MMR_DIR_PRIVEC0 __IA64_UL_CONST(0x0000000100030300) + +/* ==================================================================== */ +/* Register "SH_MD_DQRP_MMR_DIR_PRIVEC0" */ +/* privilege vector for acc=0 */ +/* ==================================================================== */ +#define SH1_MD_DQRP_MMR_DIR_PRIVEC0 __IA64_UL_CONST(0x0000000100050300) + +/* ==================================================================== */ +/* Some MMRs are functionally identical (or close enough) on both SHUB1 */ +/* and SHUB2 that it makes sense to define a geberic name for the MMR. */ +/* It is acceptible to use (for example) SH_IPI_INT to reference the */ +/* the IPI MMR. The value of SH_IPI_INT is determined at runtime based */ +/* on the type of the SHUB. Do not use these #defines in performance */ +/* critical code or loops - there is a small performance penalty. */ +/* ==================================================================== */ +#define shubmmr(a,b) (is_shub2() ? a##2_##b : a##1_##b) + +#define SH_REAL_JUNK_BUS_LED0 shubmmr(SH, REAL_JUNK_BUS_LED0) +#define SH_IPI_INT shubmmr(SH, IPI_INT) +#define SH_EVENT_OCCURRED shubmmr(SH, EVENT_OCCURRED) +#define SH_EVENT_OCCURRED_ALIAS shubmmr(SH, EVENT_OCCURRED_ALIAS) +#define SH_RTC shubmmr(SH, RTC) +#define SH_RTC1_INT_CONFIG shubmmr(SH, RTC1_INT_CONFIG) +#define SH_RTC1_INT_ENABLE shubmmr(SH, RTC1_INT_ENABLE) +#define SH_RTC2_INT_CONFIG shubmmr(SH, RTC2_INT_CONFIG) +#define SH_RTC2_INT_ENABLE shubmmr(SH, RTC2_INT_ENABLE) +#define SH_RTC3_INT_CONFIG shubmmr(SH, RTC3_INT_CONFIG) +#define SH_RTC3_INT_ENABLE shubmmr(SH, RTC3_INT_ENABLE) +#define SH_INT_CMPB shubmmr(SH, INT_CMPB) +#define SH_INT_CMPC shubmmr(SH, INT_CMPC) +#define SH_INT_CMPD shubmmr(SH, INT_CMPD) + +/* ========================================================================== */ +/* Register "SH2_BT_ENG_CSR_0" */ +/* Engine 0 Control and Status Register */ +/* ========================================================================== */ + +#define SH2_BT_ENG_CSR_0 __IA64_UL_CONST(0x0000000030040000) +#define SH2_BT_ENG_SRC_ADDR_0 __IA64_UL_CONST(0x0000000030040080) +#define SH2_BT_ENG_DEST_ADDR_0 __IA64_UL_CONST(0x0000000030040100) +#define SH2_BT_ENG_NOTIF_ADDR_0 __IA64_UL_CONST(0x0000000030040180) + +/* ========================================================================== */ +/* BTE interfaces 1-3 */ +/* ========================================================================== */ + +#define SH2_BT_ENG_CSR_1 __IA64_UL_CONST(0x0000000030050000) +#define SH2_BT_ENG_CSR_2 __IA64_UL_CONST(0x0000000030060000) +#define SH2_BT_ENG_CSR_3 __IA64_UL_CONST(0x0000000030070000) + +#endif /* _ASM_IA64_SN_SHUB_MMR_H */ diff --git a/arch/ia64/include/asm/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h new file mode 100644 index 00000000000..22a6f18a531 --- /dev/null +++ b/arch/ia64/include/asm/sn/shubio.h @@ -0,0 +1,3358 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_SHUBIO_H +#define _ASM_IA64_SN_SHUBIO_H + +#define HUB_WIDGET_ID_MAX 0xf +#define IIO_NUM_ITTES 7 +#define HUB_NUM_BIG_WINDOW (IIO_NUM_ITTES - 1) + +#define IIO_WID 0x00400000 /* Crosstalk Widget Identification */ + /* This register is also accessible from + * Crosstalk at address 0x0. */ +#define IIO_WSTAT 0x00400008 /* Crosstalk Widget Status */ +#define IIO_WCR 0x00400020 /* Crosstalk Widget Control Register */ +#define IIO_ILAPR 0x00400100 /* IO Local Access Protection Register */ +#define IIO_ILAPO 0x00400108 /* IO Local Access Protection Override */ +#define IIO_IOWA 0x00400110 /* IO Outbound Widget Access */ +#define IIO_IIWA 0x00400118 /* IO Inbound Widget Access */ +#define IIO_IIDEM 0x00400120 /* IO Inbound Device Error Mask */ +#define IIO_ILCSR 0x00400128 /* IO LLP Control and Status Register */ +#define IIO_ILLR 0x00400130 /* IO LLP Log Register */ +#define IIO_IIDSR 0x00400138 /* IO Interrupt Destination */ + +#define IIO_IGFX0 0x00400140 /* IO Graphics Node-Widget Map 0 */ +#define IIO_IGFX1 0x00400148 /* IO Graphics Node-Widget Map 1 */ + +#define IIO_ISCR0 0x00400150 /* IO Scratch Register 0 */ +#define IIO_ISCR1 0x00400158 /* IO Scratch Register 1 */ + +#define IIO_ITTE1 0x00400160 /* IO Translation Table Entry 1 */ +#define IIO_ITTE2 0x00400168 /* IO Translation Table Entry 2 */ +#define IIO_ITTE3 0x00400170 /* IO Translation Table Entry 3 */ +#define IIO_ITTE4 0x00400178 /* IO Translation Table Entry 4 */ +#define IIO_ITTE5 0x00400180 /* IO Translation Table Entry 5 */ +#define IIO_ITTE6 0x00400188 /* IO Translation Table Entry 6 */ +#define IIO_ITTE7 0x00400190 /* IO Translation Table Entry 7 */ + +#define IIO_IPRB0 0x00400198 /* IO PRB Entry 0 */ +#define IIO_IPRB8 0x004001A0 /* IO PRB Entry 8 */ +#define IIO_IPRB9 0x004001A8 /* IO PRB Entry 9 */ +#define IIO_IPRBA 0x004001B0 /* IO PRB Entry A */ +#define IIO_IPRBB 0x004001B8 /* IO PRB Entry B */ +#define IIO_IPRBC 0x004001C0 /* IO PRB Entry C */ +#define IIO_IPRBD 0x004001C8 /* IO PRB Entry D */ +#define IIO_IPRBE 0x004001D0 /* IO PRB Entry E */ +#define IIO_IPRBF 0x004001D8 /* IO PRB Entry F */ + +#define IIO_IXCC 0x004001E0 /* IO Crosstalk Credit Count Timeout */ +#define IIO_IMEM 0x004001E8 /* IO Miscellaneous Error Mask */ +#define IIO_IXTT 0x004001F0 /* IO Crosstalk Timeout Threshold */ +#define IIO_IECLR 0x004001F8 /* IO Error Clear Register */ +#define IIO_IBCR 0x00400200 /* IO BTE Control Register */ + +#define IIO_IXSM 0x00400208 /* IO Crosstalk Spurious Message */ +#define IIO_IXSS 0x00400210 /* IO Crosstalk Spurious Sideband */ + +#define IIO_ILCT 0x00400218 /* IO LLP Channel Test */ + +#define IIO_IIEPH1 0x00400220 /* IO Incoming Error Packet Header, Part 1 */ +#define IIO_IIEPH2 0x00400228 /* IO Incoming Error Packet Header, Part 2 */ + +#define IIO_ISLAPR 0x00400230 /* IO SXB Local Access Protection Regster */ +#define IIO_ISLAPO 0x00400238 /* IO SXB Local Access Protection Override */ + +#define IIO_IWI 0x00400240 /* IO Wrapper Interrupt Register */ +#define IIO_IWEL 0x00400248 /* IO Wrapper Error Log Register */ +#define IIO_IWC 0x00400250 /* IO Wrapper Control Register */ +#define IIO_IWS 0x00400258 /* IO Wrapper Status Register */ +#define IIO_IWEIM 0x00400260 /* IO Wrapper Error Interrupt Masking Register */ + +#define IIO_IPCA 0x00400300 /* IO PRB Counter Adjust */ + +#define IIO_IPRTE0_A 0x00400308 /* IO PIO Read Address Table Entry 0, Part A */ +#define IIO_IPRTE1_A 0x00400310 /* IO PIO Read Address Table Entry 1, Part A */ +#define IIO_IPRTE2_A 0x00400318 /* IO PIO Read Address Table Entry 2, Part A */ +#define IIO_IPRTE3_A 0x00400320 /* IO PIO Read Address Table Entry 3, Part A */ +#define IIO_IPRTE4_A 0x00400328 /* IO PIO Read Address Table Entry 4, Part A */ +#define IIO_IPRTE5_A 0x00400330 /* IO PIO Read Address Table Entry 5, Part A */ +#define IIO_IPRTE6_A 0x00400338 /* IO PIO Read Address Table Entry 6, Part A */ +#define IIO_IPRTE7_A 0x00400340 /* IO PIO Read Address Table Entry 7, Part A */ + +#define IIO_IPRTE0_B 0x00400348 /* IO PIO Read Address Table Entry 0, Part B */ +#define IIO_IPRTE1_B 0x00400350 /* IO PIO Read Address Table Entry 1, Part B */ +#define IIO_IPRTE2_B 0x00400358 /* IO PIO Read Address Table Entry 2, Part B */ +#define IIO_IPRTE3_B 0x00400360 /* IO PIO Read Address Table Entry 3, Part B */ +#define IIO_IPRTE4_B 0x00400368 /* IO PIO Read Address Table Entry 4, Part B */ +#define IIO_IPRTE5_B 0x00400370 /* IO PIO Read Address Table Entry 5, Part B */ +#define IIO_IPRTE6_B 0x00400378 /* IO PIO Read Address Table Entry 6, Part B */ +#define IIO_IPRTE7_B 0x00400380 /* IO PIO Read Address Table Entry 7, Part B */ + +#define IIO_IPDR 0x00400388 /* IO PIO Deallocation Register */ +#define IIO_ICDR 0x00400390 /* IO CRB Entry Deallocation Register */ +#define IIO_IFDR 0x00400398 /* IO IOQ FIFO Depth Register */ +#define IIO_IIAP 0x004003A0 /* IO IIQ Arbitration Parameters */ +#define IIO_ICMR 0x004003A8 /* IO CRB Management Register */ +#define IIO_ICCR 0x004003B0 /* IO CRB Control Register */ +#define IIO_ICTO 0x004003B8 /* IO CRB Timeout */ +#define IIO_ICTP 0x004003C0 /* IO CRB Timeout Prescalar */ + +#define IIO_ICRB0_A 0x00400400 /* IO CRB Entry 0_A */ +#define IIO_ICRB0_B 0x00400408 /* IO CRB Entry 0_B */ +#define IIO_ICRB0_C 0x00400410 /* IO CRB Entry 0_C */ +#define IIO_ICRB0_D 0x00400418 /* IO CRB Entry 0_D */ +#define IIO_ICRB0_E 0x00400420 /* IO CRB Entry 0_E */ + +#define IIO_ICRB1_A 0x00400430 /* IO CRB Entry 1_A */ +#define IIO_ICRB1_B 0x00400438 /* IO CRB Entry 1_B */ +#define IIO_ICRB1_C 0x00400440 /* IO CRB Entry 1_C */ +#define IIO_ICRB1_D 0x00400448 /* IO CRB Entry 1_D */ +#define IIO_ICRB1_E 0x00400450 /* IO CRB Entry 1_E */ + +#define IIO_ICRB2_A 0x00400460 /* IO CRB Entry 2_A */ +#define IIO_ICRB2_B 0x00400468 /* IO CRB Entry 2_B */ +#define IIO_ICRB2_C 0x00400470 /* IO CRB Entry 2_C */ +#define IIO_ICRB2_D 0x00400478 /* IO CRB Entry 2_D */ +#define IIO_ICRB2_E 0x00400480 /* IO CRB Entry 2_E */ + +#define IIO_ICRB3_A 0x00400490 /* IO CRB Entry 3_A */ +#define IIO_ICRB3_B 0x00400498 /* IO CRB Entry 3_B */ +#define IIO_ICRB3_C 0x004004a0 /* IO CRB Entry 3_C */ +#define IIO_ICRB3_D 0x004004a8 /* IO CRB Entry 3_D */ +#define IIO_ICRB3_E 0x004004b0 /* IO CRB Entry 3_E */ + +#define IIO_ICRB4_A 0x004004c0 /* IO CRB Entry 4_A */ +#define IIO_ICRB4_B 0x004004c8 /* IO CRB Entry 4_B */ +#define IIO_ICRB4_C 0x004004d0 /* IO CRB Entry 4_C */ +#define IIO_ICRB4_D 0x004004d8 /* IO CRB Entry 4_D */ +#define IIO_ICRB4_E 0x004004e0 /* IO CRB Entry 4_E */ + +#define IIO_ICRB5_A 0x004004f0 /* IO CRB Entry 5_A */ +#define IIO_ICRB5_B 0x004004f8 /* IO CRB Entry 5_B */ +#define IIO_ICRB5_C 0x00400500 /* IO CRB Entry 5_C */ +#define IIO_ICRB5_D 0x00400508 /* IO CRB Entry 5_D */ +#define IIO_ICRB5_E 0x00400510 /* IO CRB Entry 5_E */ + +#define IIO_ICRB6_A 0x00400520 /* IO CRB Entry 6_A */ +#define IIO_ICRB6_B 0x00400528 /* IO CRB Entry 6_B */ +#define IIO_ICRB6_C 0x00400530 /* IO CRB Entry 6_C */ +#define IIO_ICRB6_D 0x00400538 /* IO CRB Entry 6_D */ +#define IIO_ICRB6_E 0x00400540 /* IO CRB Entry 6_E */ + +#define IIO_ICRB7_A 0x00400550 /* IO CRB Entry 7_A */ +#define IIO_ICRB7_B 0x00400558 /* IO CRB Entry 7_B */ +#define IIO_ICRB7_C 0x00400560 /* IO CRB Entry 7_C */ +#define IIO_ICRB7_D 0x00400568 /* IO CRB Entry 7_D */ +#define IIO_ICRB7_E 0x00400570 /* IO CRB Entry 7_E */ + +#define IIO_ICRB8_A 0x00400580 /* IO CRB Entry 8_A */ +#define IIO_ICRB8_B 0x00400588 /* IO CRB Entry 8_B */ +#define IIO_ICRB8_C 0x00400590 /* IO CRB Entry 8_C */ +#define IIO_ICRB8_D 0x00400598 /* IO CRB Entry 8_D */ +#define IIO_ICRB8_E 0x004005a0 /* IO CRB Entry 8_E */ + +#define IIO_ICRB9_A 0x004005b0 /* IO CRB Entry 9_A */ +#define IIO_ICRB9_B 0x004005b8 /* IO CRB Entry 9_B */ +#define IIO_ICRB9_C 0x004005c0 /* IO CRB Entry 9_C */ +#define IIO_ICRB9_D 0x004005c8 /* IO CRB Entry 9_D */ +#define IIO_ICRB9_E 0x004005d0 /* IO CRB Entry 9_E */ + +#define IIO_ICRBA_A 0x004005e0 /* IO CRB Entry A_A */ +#define IIO_ICRBA_B 0x004005e8 /* IO CRB Entry A_B */ +#define IIO_ICRBA_C 0x004005f0 /* IO CRB Entry A_C */ +#define IIO_ICRBA_D 0x004005f8 /* IO CRB Entry A_D */ +#define IIO_ICRBA_E 0x00400600 /* IO CRB Entry A_E */ + +#define IIO_ICRBB_A 0x00400610 /* IO CRB Entry B_A */ +#define IIO_ICRBB_B 0x00400618 /* IO CRB Entry B_B */ +#define IIO_ICRBB_C 0x00400620 /* IO CRB Entry B_C */ +#define IIO_ICRBB_D 0x00400628 /* IO CRB Entry B_D */ +#define IIO_ICRBB_E 0x00400630 /* IO CRB Entry B_E */ + +#define IIO_ICRBC_A 0x00400640 /* IO CRB Entry C_A */ +#define IIO_ICRBC_B 0x00400648 /* IO CRB Entry C_B */ +#define IIO_ICRBC_C 0x00400650 /* IO CRB Entry C_C */ +#define IIO_ICRBC_D 0x00400658 /* IO CRB Entry C_D */ +#define IIO_ICRBC_E 0x00400660 /* IO CRB Entry C_E */ + +#define IIO_ICRBD_A 0x00400670 /* IO CRB Entry D_A */ +#define IIO_ICRBD_B 0x00400678 /* IO CRB Entry D_B */ +#define IIO_ICRBD_C 0x00400680 /* IO CRB Entry D_C */ +#define IIO_ICRBD_D 0x00400688 /* IO CRB Entry D_D */ +#define IIO_ICRBD_E 0x00400690 /* IO CRB Entry D_E */ + +#define IIO_ICRBE_A 0x004006a0 /* IO CRB Entry E_A */ +#define IIO_ICRBE_B 0x004006a8 /* IO CRB Entry E_B */ +#define IIO_ICRBE_C 0x004006b0 /* IO CRB Entry E_C */ +#define IIO_ICRBE_D 0x004006b8 /* IO CRB Entry E_D */ +#define IIO_ICRBE_E 0x004006c0 /* IO CRB Entry E_E */ + +#define IIO_ICSML 0x00400700 /* IO CRB Spurious Message Low */ +#define IIO_ICSMM 0x00400708 /* IO CRB Spurious Message Middle */ +#define IIO_ICSMH 0x00400710 /* IO CRB Spurious Message High */ + +#define IIO_IDBSS 0x00400718 /* IO Debug Submenu Select */ + +#define IIO_IBLS0 0x00410000 /* IO BTE Length Status 0 */ +#define IIO_IBSA0 0x00410008 /* IO BTE Source Address 0 */ +#define IIO_IBDA0 0x00410010 /* IO BTE Destination Address 0 */ +#define IIO_IBCT0 0x00410018 /* IO BTE Control Terminate 0 */ +#define IIO_IBNA0 0x00410020 /* IO BTE Notification Address 0 */ +#define IIO_IBIA0 0x00410028 /* IO BTE Interrupt Address 0 */ +#define IIO_IBLS1 0x00420000 /* IO BTE Length Status 1 */ +#define IIO_IBSA1 0x00420008 /* IO BTE Source Address 1 */ +#define IIO_IBDA1 0x00420010 /* IO BTE Destination Address 1 */ +#define IIO_IBCT1 0x00420018 /* IO BTE Control Terminate 1 */ +#define IIO_IBNA1 0x00420020 /* IO BTE Notification Address 1 */ +#define IIO_IBIA1 0x00420028 /* IO BTE Interrupt Address 1 */ + +#define IIO_IPCR 0x00430000 /* IO Performance Control */ +#define IIO_IPPR 0x00430008 /* IO Performance Profiling */ + +/************************************************************************ + * * + * Description: This register echoes some information from the * + * LB_REV_ID register. It is available through Crosstalk as described * + * above. The REV_NUM and MFG_NUM fields receive their values from * + * the REVISION and MANUFACTURER fields in the LB_REV_ID register. * + * The PART_NUM field's value is the Crosstalk device ID number that * + * Steve Miller assigned to the SHub chip. * + * * + ************************************************************************/ + +typedef union ii_wid_u { + u64 ii_wid_regval; + struct { + u64 w_rsvd_1:1; + u64 w_mfg_num:11; + u64 w_part_num:16; + u64 w_rev_num:4; + u64 w_rsvd:32; + } ii_wid_fld_s; +} ii_wid_u_t; + +/************************************************************************ + * * + * The fields in this register are set upon detection of an error * + * and cleared by various mechanisms, as explained in the * + * description. * + * * + ************************************************************************/ + +typedef union ii_wstat_u { + u64 ii_wstat_regval; + struct { + u64 w_pending:4; + u64 w_xt_crd_to:1; + u64 w_xt_tail_to:1; + u64 w_rsvd_3:3; + u64 w_tx_mx_rty:1; + u64 w_rsvd_2:6; + u64 w_llp_tx_cnt:8; + u64 w_rsvd_1:8; + u64 w_crazy:1; + u64 w_rsvd:31; + } ii_wstat_fld_s; +} ii_wstat_u_t; + +/************************************************************************ + * * + * Description: This is a read-write enabled register. It controls * + * various aspects of the Crosstalk flow control. * + * * + ************************************************************************/ + +typedef union ii_wcr_u { + u64 ii_wcr_regval; + struct { + u64 w_wid:4; + u64 w_tag:1; + u64 w_rsvd_1:8; + u64 w_dst_crd:3; + u64 w_f_bad_pkt:1; + u64 w_dir_con:1; + u64 w_e_thresh:5; + u64 w_rsvd:41; + } ii_wcr_fld_s; +} ii_wcr_u_t; + +/************************************************************************ + * * + * Description: This register's value is a bit vector that guards * + * access to local registers within the II as well as to external * + * Crosstalk widgets. Each bit in the register corresponds to a * + * particular region in the system; a region consists of one, two or * + * four nodes (depending on the value of the REGION_SIZE field in the * + * LB_REV_ID register, which is documented in Section 8.3.1.1). The * + * protection provided by this register applies to PIO read * + * operations as well as PIO write operations. The II will perform a * + * PIO read or write request only if the bit for the requestor's * + * region is set; otherwise, the II will not perform the requested * + * operation and will return an error response. When a PIO read or * + * write request targets an external Crosstalk widget, then not only * + * must the bit for the requestor's region be set in the ILAPR, but * + * also the target widget's bit in the IOWA register must be set in * + * order for the II to perform the requested operation; otherwise, * + * the II will return an error response. Hence, the protection * + * provided by the IOWA register supplements the protection provided * + * by the ILAPR for requests that target external Crosstalk widgets. * + * This register itself can be accessed only by the nodes whose * + * region ID bits are enabled in this same register. It can also be * + * accessed through the IAlias space by the local processors. * + * The reset value of this register allows access by all nodes. * + * * + ************************************************************************/ + +typedef union ii_ilapr_u { + u64 ii_ilapr_regval; + struct { + u64 i_region:64; + } ii_ilapr_fld_s; +} ii_ilapr_u_t; + +/************************************************************************ + * * + * Description: A write to this register of the 64-bit value * + * "SGIrules" in ASCII, will cause the bit in the ILAPR register * + * corresponding to the region of the requestor to be set (allow * + * access). A write of any other value will be ignored. Access * + * protection for this register is "SGIrules". * + * This register can also be accessed through the IAlias space. * + * However, this access will not change the access permissions in the * + * ILAPR. * + * * + ************************************************************************/ + +typedef union ii_ilapo_u { + u64 ii_ilapo_regval; + struct { + u64 i_io_ovrride:64; + } ii_ilapo_fld_s; +} ii_ilapo_u_t; + +/************************************************************************ + * * + * This register qualifies all the PIO and Graphics writes launched * + * from the SHUB towards a widget. * + * * + ************************************************************************/ + +typedef union ii_iowa_u { + u64 ii_iowa_regval; + struct { + u64 i_w0_oac:1; + u64 i_rsvd_1:7; + u64 i_wx_oac:8; + u64 i_rsvd:48; + } ii_iowa_fld_s; +} ii_iowa_u_t; + +/************************************************************************ + * * + * Description: This register qualifies all the requests launched * + * from a widget towards the Shub. This register is intended to be * + * used by software in case of misbehaving widgets. * + * * + * * + ************************************************************************/ + +typedef union ii_iiwa_u { + u64 ii_iiwa_regval; + struct { + u64 i_w0_iac:1; + u64 i_rsvd_1:7; + u64 i_wx_iac:8; + u64 i_rsvd:48; + } ii_iiwa_fld_s; +} ii_iiwa_u_t; + +/************************************************************************ + * * + * Description: This register qualifies all the operations launched * + * from a widget towards the SHub. It allows individual access * + * control for up to 8 devices per widget. A device refers to * + * individual DMA master hosted by a widget. * + * The bits in each field of this register are cleared by the Shub * + * upon detection of an error which requires the device to be * + * disabled. These fields assume that 0=TNUM=7 (i.e., Bridge-centric * + * Crosstalk). Whether or not a device has access rights to this * + * Shub is determined by an AND of the device enable bit in the * + * appropriate field of this register and the corresponding bit in * + * the Wx_IAC field (for the widget which this device belongs to). * + * The bits in this field are set by writing a 1 to them. Incoming * + * replies from Crosstalk are not subject to this access control * + * mechanism. * + * * + ************************************************************************/ + +typedef union ii_iidem_u { + u64 ii_iidem_regval; + struct { + u64 i_w8_dxs:8; + u64 i_w9_dxs:8; + u64 i_wa_dxs:8; + u64 i_wb_dxs:8; + u64 i_wc_dxs:8; + u64 i_wd_dxs:8; + u64 i_we_dxs:8; + u64 i_wf_dxs:8; + } ii_iidem_fld_s; +} ii_iidem_u_t; + +/************************************************************************ + * * + * This register contains the various programmable fields necessary * + * for controlling and observing the LLP signals. * + * * + ************************************************************************/ + +typedef union ii_ilcsr_u { + u64 ii_ilcsr_regval; + struct { + u64 i_nullto:6; + u64 i_rsvd_4:2; + u64 i_wrmrst:1; + u64 i_rsvd_3:1; + u64 i_llp_en:1; + u64 i_bm8:1; + u64 i_llp_stat:2; + u64 i_remote_power:1; + u64 i_rsvd_2:1; + u64 i_maxrtry:10; + u64 i_d_avail_sel:2; + u64 i_rsvd_1:4; + u64 i_maxbrst:10; + u64 i_rsvd:22; + + } ii_ilcsr_fld_s; +} ii_ilcsr_u_t; + +/************************************************************************ + * * + * This is simply a status registers that monitors the LLP error * + * rate. * + * * + ************************************************************************/ + +typedef union ii_illr_u { + u64 ii_illr_regval; + struct { + u64 i_sn_cnt:16; + u64 i_cb_cnt:16; + u64 i_rsvd:32; + } ii_illr_fld_s; +} ii_illr_u_t; + +/************************************************************************ + * * + * Description: All II-detected non-BTE error interrupts are * + * specified via this register. * + * NOTE: The PI interrupt register address is hardcoded in the II. If * + * PI_ID==0, then the II sends an interrupt request (Duplonet PWRI * + * packet) to address offset 0x0180_0090 within the local register * + * address space of PI0 on the node specified by the NODE field. If * + * PI_ID==1, then the II sends the interrupt request to address * + * offset 0x01A0_0090 within the local register address space of PI1 * + * on the node specified by the NODE field. * + * * + ************************************************************************/ + +typedef union ii_iidsr_u { + u64 ii_iidsr_regval; + struct { + u64 i_level:8; + u64 i_pi_id:1; + u64 i_node:11; + u64 i_rsvd_3:4; + u64 i_enable:1; + u64 i_rsvd_2:3; + u64 i_int_sent:2; + u64 i_rsvd_1:2; + u64 i_pi0_forward_int:1; + u64 i_pi1_forward_int:1; + u64 i_rsvd:30; + } ii_iidsr_fld_s; +} ii_iidsr_u_t; + +/************************************************************************ + * * + * There are two instances of this register. This register is used * + * for matching up the incoming responses from the graphics widget to * + * the processor that initiated the graphics operation. The * + * write-responses are converted to graphics credits and returned to * + * the processor so that the processor interface can manage the flow * + * control. * + * * + ************************************************************************/ + +typedef union ii_igfx0_u { + u64 ii_igfx0_regval; + struct { + u64 i_w_num:4; + u64 i_pi_id:1; + u64 i_n_num:12; + u64 i_p_num:1; + u64 i_rsvd:46; + } ii_igfx0_fld_s; +} ii_igfx0_u_t; + +/************************************************************************ + * * + * There are two instances of this register. This register is used * + * for matching up the incoming responses from the graphics widget to * + * the processor that initiated the graphics operation. The * + * write-responses are converted to graphics credits and returned to * + * the processor so that the processor interface can manage the flow * + * control. * + * * + ************************************************************************/ + +typedef union ii_igfx1_u { + u64 ii_igfx1_regval; + struct { + u64 i_w_num:4; + u64 i_pi_id:1; + u64 i_n_num:12; + u64 i_p_num:1; + u64 i_rsvd:46; + } ii_igfx1_fld_s; +} ii_igfx1_u_t; + +/************************************************************************ + * * + * There are two instances of this registers. These registers are * + * used as scratch registers for software use. * + * * + ************************************************************************/ + +typedef union ii_iscr0_u { + u64 ii_iscr0_regval; + struct { + u64 i_scratch:64; + } ii_iscr0_fld_s; +} ii_iscr0_u_t; + +/************************************************************************ + * * + * There are two instances of this registers. These registers are * + * used as scratch registers for software use. * + * * + ************************************************************************/ + +typedef union ii_iscr1_u { + u64 ii_iscr1_regval; + struct { + u64 i_scratch:64; + } ii_iscr1_fld_s; +} ii_iscr1_u_t; + +/************************************************************************ + * * + * Description: There are seven instances of translation table entry * + * registers. Each register maps a Shub Big Window to a 48-bit * + * address on Crosstalk. * + * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * + * number) are used to select one of these 7 registers. The Widget * + * number field is then derived from the W_NUM field for synthesizing * + * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * + * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * + * are padded with zeros. Although the maximum Crosstalk space * + * addressable by the SHub is thus the lower 16 GBytes per widget * + * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this * + * space can be accessed. * + * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * + * Window number) are used to select one of these 7 registers. The * + * Widget number field is then derived from the W_NUM field for * + * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * + * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * + * field is used as Crosstalk[47], and remainder of the Crosstalk * + * address bits (Crosstalk[46:34]) are always zero. While the maximum * + * Crosstalk space addressable by the Shub is thus the lower * + * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> * + * of this space can be accessed. * + * * + ************************************************************************/ + +typedef union ii_itte1_u { + u64 ii_itte1_regval; + struct { + u64 i_offset:5; + u64 i_rsvd_1:3; + u64 i_w_num:4; + u64 i_iosp:1; + u64 i_rsvd:51; + } ii_itte1_fld_s; +} ii_itte1_u_t; + +/************************************************************************ + * * + * Description: There are seven instances of translation table entry * + * registers. Each register maps a Shub Big Window to a 48-bit * + * address on Crosstalk. * + * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * + * number) are used to select one of these 7 registers. The Widget * + * number field is then derived from the W_NUM field for synthesizing * + * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * + * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * + * are padded with zeros. Although the maximum Crosstalk space * + * addressable by the Shub is thus the lower 16 GBytes per widget * + * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this * + * space can be accessed. * + * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * + * Window number) are used to select one of these 7 registers. The * + * Widget number field is then derived from the W_NUM field for * + * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * + * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * + * field is used as Crosstalk[47], and remainder of the Crosstalk * + * address bits (Crosstalk[46:34]) are always zero. While the maximum * + * Crosstalk space addressable by the Shub is thus the lower * + * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> * + * of this space can be accessed. * + * * + ************************************************************************/ + +typedef union ii_itte2_u { + u64 ii_itte2_regval; + struct { + u64 i_offset:5; + u64 i_rsvd_1:3; + u64 i_w_num:4; + u64 i_iosp:1; + u64 i_rsvd:51; + } ii_itte2_fld_s; +} ii_itte2_u_t; + +/************************************************************************ + * * + * Description: There are seven instances of translation table entry * + * registers. Each register maps a Shub Big Window to a 48-bit * + * address on Crosstalk. * + * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * + * number) are used to select one of these 7 registers. The Widget * + * number field is then derived from the W_NUM field for synthesizing * + * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * + * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * + * are padded with zeros. Although the maximum Crosstalk space * + * addressable by the Shub is thus the lower 16 GBytes per widget * + * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this * + * space can be accessed. * + * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * + * Window number) are used to select one of these 7 registers. The * + * Widget number field is then derived from the W_NUM field for * + * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * + * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * + * field is used as Crosstalk[47], and remainder of the Crosstalk * + * address bits (Crosstalk[46:34]) are always zero. While the maximum * + * Crosstalk space addressable by the SHub is thus the lower * + * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> * + * of this space can be accessed. * + * * + ************************************************************************/ + +typedef union ii_itte3_u { + u64 ii_itte3_regval; + struct { + u64 i_offset:5; + u64 i_rsvd_1:3; + u64 i_w_num:4; + u64 i_iosp:1; + u64 i_rsvd:51; + } ii_itte3_fld_s; +} ii_itte3_u_t; + +/************************************************************************ + * * + * Description: There are seven instances of translation table entry * + * registers. Each register maps a SHub Big Window to a 48-bit * + * address on Crosstalk. * + * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * + * number) are used to select one of these 7 registers. The Widget * + * number field is then derived from the W_NUM field for synthesizing * + * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * + * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * + * are padded with zeros. Although the maximum Crosstalk space * + * addressable by the SHub is thus the lower 16 GBytes per widget * + * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this * + * space can be accessed. * + * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * + * Window number) are used to select one of these 7 registers. The * + * Widget number field is then derived from the W_NUM field for * + * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * + * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * + * field is used as Crosstalk[47], and remainder of the Crosstalk * + * address bits (Crosstalk[46:34]) are always zero. While the maximum * + * Crosstalk space addressable by the SHub is thus the lower * + * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> * + * of this space can be accessed. * + * * + ************************************************************************/ + +typedef union ii_itte4_u { + u64 ii_itte4_regval; + struct { + u64 i_offset:5; + u64 i_rsvd_1:3; + u64 i_w_num:4; + u64 i_iosp:1; + u64 i_rsvd:51; + } ii_itte4_fld_s; +} ii_itte4_u_t; + +/************************************************************************ + * * + * Description: There are seven instances of translation table entry * + * registers. Each register maps a SHub Big Window to a 48-bit * + * address on Crosstalk. * + * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * + * number) are used to select one of these 7 registers. The Widget * + * number field is then derived from the W_NUM field for synthesizing * + * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * + * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * + * are padded with zeros. Although the maximum Crosstalk space * + * addressable by the Shub is thus the lower 16 GBytes per widget * + * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this * + * space can be accessed. * + * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * + * Window number) are used to select one of these 7 registers. The * + * Widget number field is then derived from the W_NUM field for * + * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * + * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * + * field is used as Crosstalk[47], and remainder of the Crosstalk * + * address bits (Crosstalk[46:34]) are always zero. While the maximum * + * Crosstalk space addressable by the Shub is thus the lower * + * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> * + * of this space can be accessed. * + * * + ************************************************************************/ + +typedef union ii_itte5_u { + u64 ii_itte5_regval; + struct { + u64 i_offset:5; + u64 i_rsvd_1:3; + u64 i_w_num:4; + u64 i_iosp:1; + u64 i_rsvd:51; + } ii_itte5_fld_s; +} ii_itte5_u_t; + +/************************************************************************ + * * + * Description: There are seven instances of translation table entry * + * registers. Each register maps a Shub Big Window to a 48-bit * + * address on Crosstalk. * + * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * + * number) are used to select one of these 7 registers. The Widget * + * number field is then derived from the W_NUM field for synthesizing * + * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * + * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * + * are padded with zeros. Although the maximum Crosstalk space * + * addressable by the Shub is thus the lower 16 GBytes per widget * + * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this * + * space can be accessed. * + * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * + * Window number) are used to select one of these 7 registers. The * + * Widget number field is then derived from the W_NUM field for * + * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * + * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * + * field is used as Crosstalk[47], and remainder of the Crosstalk * + * address bits (Crosstalk[46:34]) are always zero. While the maximum * + * Crosstalk space addressable by the Shub is thus the lower * + * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> * + * of this space can be accessed. * + * * + ************************************************************************/ + +typedef union ii_itte6_u { + u64 ii_itte6_regval; + struct { + u64 i_offset:5; + u64 i_rsvd_1:3; + u64 i_w_num:4; + u64 i_iosp:1; + u64 i_rsvd:51; + } ii_itte6_fld_s; +} ii_itte6_u_t; + +/************************************************************************ + * * + * Description: There are seven instances of translation table entry * + * registers. Each register maps a Shub Big Window to a 48-bit * + * address on Crosstalk. * + * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * + * number) are used to select one of these 7 registers. The Widget * + * number field is then derived from the W_NUM field for synthesizing * + * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * + * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * + * are padded with zeros. Although the maximum Crosstalk space * + * addressable by the Shub is thus the lower 16 GBytes per widget * + * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this * + * space can be accessed. * + * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * + * Window number) are used to select one of these 7 registers. The * + * Widget number field is then derived from the W_NUM field for * + * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * + * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * + * field is used as Crosstalk[47], and remainder of the Crosstalk * + * address bits (Crosstalk[46:34]) are always zero. While the maximum * + * Crosstalk space addressable by the SHub is thus the lower * + * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> * + * of this space can be accessed. * + * * + ************************************************************************/ + +typedef union ii_itte7_u { + u64 ii_itte7_regval; + struct { + u64 i_offset:5; + u64 i_rsvd_1:3; + u64 i_w_num:4; + u64 i_iosp:1; + u64 i_rsvd:51; + } ii_itte7_fld_s; +} ii_itte7_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of SHub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * . * + * * + ************************************************************************/ + +typedef union ii_iprb0_u { + u64 ii_iprb0_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprb0_fld_s; +} ii_iprb0_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of SHub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * . * + * * + ************************************************************************/ + +typedef union ii_iprb8_u { + u64 ii_iprb8_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprb8_fld_s; +} ii_iprb8_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of SHub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * . * + * * + ************************************************************************/ + +typedef union ii_iprb9_u { + u64 ii_iprb9_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprb9_fld_s; +} ii_iprb9_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of SHub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * * + * * + ************************************************************************/ + +typedef union ii_iprba_u { + u64 ii_iprba_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprba_fld_s; +} ii_iprba_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of SHub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * . * + * * + ************************************************************************/ + +typedef union ii_iprbb_u { + u64 ii_iprbb_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprbb_fld_s; +} ii_iprbb_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of SHub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * . * + * * + ************************************************************************/ + +typedef union ii_iprbc_u { + u64 ii_iprbc_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprbc_fld_s; +} ii_iprbc_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of SHub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * . * + * * + ************************************************************************/ + +typedef union ii_iprbd_u { + u64 ii_iprbd_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprbd_fld_s; +} ii_iprbd_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of SHub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * . * + * * + ************************************************************************/ + +typedef union ii_iprbe_u { + u64 ii_iprbe_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprbe_fld_s; +} ii_iprbe_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of Shub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * . * + * * + ************************************************************************/ + +typedef union ii_iprbf_u { + u64 ii_iprbf_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprbe_fld_s; +} ii_iprbf_u_t; + +/************************************************************************ + * * + * This register specifies the timeout value to use for monitoring * + * Crosstalk credits which are used outbound to Crosstalk. An * + * internal counter called the Crosstalk Credit Timeout Counter * + * increments every 128 II clocks. The counter starts counting * + * anytime the credit count drops below a threshold, and resets to * + * zero (stops counting) anytime the credit count is at or above the * + * threshold. The threshold is 1 credit in direct connect mode and 2 * + * in Crossbow connect mode. When the internal Crosstalk Credit * + * Timeout Counter reaches the value programmed in this register, a * + * Crosstalk Credit Timeout has occurred. The internal counter is not * + * readable from software, and stops counting at its maximum value, * + * so it cannot cause more than one interrupt. * + * * + ************************************************************************/ + +typedef union ii_ixcc_u { + u64 ii_ixcc_regval; + struct { + u64 i_time_out:26; + u64 i_rsvd:38; + } ii_ixcc_fld_s; +} ii_ixcc_u_t; + +/************************************************************************ + * * + * Description: This register qualifies all the PIO and DMA * + * operations launched from widget 0 towards the SHub. In * + * addition, it also qualifies accesses by the BTE streams. * + * The bits in each field of this register are cleared by the SHub * + * upon detection of an error which requires widget 0 or the BTE * + * streams to be terminated. Whether or not widget x has access * + * rights to this SHub is determined by an AND of the device * + * enable bit in the appropriate field of this register and bit 0 in * + * the Wx_IAC field. The bits in this field are set by writing a 1 to * + * them. Incoming replies from Crosstalk are not subject to this * + * access control mechanism. * + * * + ************************************************************************/ + +typedef union ii_imem_u { + u64 ii_imem_regval; + struct { + u64 i_w0_esd:1; + u64 i_rsvd_3:3; + u64 i_b0_esd:1; + u64 i_rsvd_2:3; + u64 i_b1_esd:1; + u64 i_rsvd_1:3; + u64 i_clr_precise:1; + u64 i_rsvd:51; + } ii_imem_fld_s; +} ii_imem_u_t; + +/************************************************************************ + * * + * Description: This register specifies the timeout value to use for * + * monitoring Crosstalk tail flits coming into the Shub in the * + * TAIL_TO field. An internal counter associated with this register * + * is incremented every 128 II internal clocks (7 bits). The counter * + * starts counting anytime a header micropacket is received and stops * + * counting (and resets to zero) any time a micropacket with a Tail * + * bit is received. Once the counter reaches the threshold value * + * programmed in this register, it generates an interrupt to the * + * processor that is programmed into the IIDSR. The counter saturates * + * (does not roll over) at its maximum value, so it cannot cause * + * another interrupt until after it is cleared. * + * The register also contains the Read Response Timeout values. The * + * Prescalar is 23 bits, and counts II clocks. An internal counter * + * increments on every II clock and when it reaches the value in the * + * Prescalar field, all IPRTE registers with their valid bits set * + * have their Read Response timers bumped. Whenever any of them match * + * the value in the RRSP_TO field, a Read Response Timeout has * + * occurred, and error handling occurs as described in the Error * + * Handling section of this document. * + * * + ************************************************************************/ + +typedef union ii_ixtt_u { + u64 ii_ixtt_regval; + struct { + u64 i_tail_to:26; + u64 i_rsvd_1:6; + u64 i_rrsp_ps:23; + u64 i_rrsp_to:5; + u64 i_rsvd:4; + } ii_ixtt_fld_s; +} ii_ixtt_u_t; + +/************************************************************************ + * * + * Writing a 1 to the fields of this register clears the appropriate * + * error bits in other areas of SHub. Note that when the * + * E_PRB_x bits are used to clear error bits in PRB registers, * + * SPUR_RD and SPUR_WR may persist, because they require additional * + * action to clear them. See the IPRBx and IXSS Register * + * specifications. * + * * + ************************************************************************/ + +typedef union ii_ieclr_u { + u64 ii_ieclr_regval; + struct { + u64 i_e_prb_0:1; + u64 i_rsvd:7; + u64 i_e_prb_8:1; + u64 i_e_prb_9:1; + u64 i_e_prb_a:1; + u64 i_e_prb_b:1; + u64 i_e_prb_c:1; + u64 i_e_prb_d:1; + u64 i_e_prb_e:1; + u64 i_e_prb_f:1; + u64 i_e_crazy:1; + u64 i_e_bte_0:1; + u64 i_e_bte_1:1; + u64 i_reserved_1:10; + u64 i_spur_rd_hdr:1; + u64 i_cam_intr_to:1; + u64 i_cam_overflow:1; + u64 i_cam_read_miss:1; + u64 i_ioq_rep_underflow:1; + u64 i_ioq_req_underflow:1; + u64 i_ioq_rep_overflow:1; + u64 i_ioq_req_overflow:1; + u64 i_iiq_rep_overflow:1; + u64 i_iiq_req_overflow:1; + u64 i_ii_xn_rep_cred_overflow:1; + u64 i_ii_xn_req_cred_overflow:1; + u64 i_ii_xn_invalid_cmd:1; + u64 i_xn_ii_invalid_cmd:1; + u64 i_reserved_2:21; + } ii_ieclr_fld_s; +} ii_ieclr_u_t; + +/************************************************************************ + * * + * This register controls both BTEs. SOFT_RESET is intended for * + * recovery after an error. COUNT controls the total number of CRBs * + * that both BTEs (combined) can use, which affects total BTE * + * bandwidth. * + * * + ************************************************************************/ + +typedef union ii_ibcr_u { + u64 ii_ibcr_regval; + struct { + u64 i_count:4; + u64 i_rsvd_1:4; + u64 i_soft_reset:1; + u64 i_rsvd:55; + } ii_ibcr_fld_s; +} ii_ibcr_u_t; + +/************************************************************************ + * * + * This register contains the header of a spurious read response * + * received from Crosstalk. A spurious read response is defined as a * + * read response received by II from a widget for which (1) the SIDN * + * has a value between 1 and 7, inclusive (II never sends requests to * + * these widgets (2) there is no valid IPRTE register which * + * corresponds to the TNUM, or (3) the widget indicated in SIDN is * + * not the same as the widget recorded in the IPRTE register * + * referenced by the TNUM. If this condition is true, and if the * + * IXSS[VALID] bit is clear, then the header of the spurious read * + * response is capture in IXSM and IXSS, and IXSS[VALID] is set. The * + * errant header is thereby captured, and no further spurious read * + * respones are captured until IXSS[VALID] is cleared by setting the * + * appropriate bit in IECLR.Everytime a spurious read response is * + * detected, the SPUR_RD bit of the PRB corresponding to the incoming * + * message's SIDN field is set. This always happens, regarless of * + * whether a header is captured. The programmer should check * + * IXSM[SIDN] to determine which widget sent the spurious response, * + * because there may be more than one SPUR_RD bit set in the PRB * + * registers. The widget indicated by IXSM[SIDN] was the first * + * spurious read response to be received since the last time * + * IXSS[VALID] was clear. The SPUR_RD bit of the corresponding PRB * + * will be set. Any SPUR_RD bits in any other PRB registers indicate * + * spurious messages from other widets which were detected after the * + * header was captured.. * + * * + ************************************************************************/ + +typedef union ii_ixsm_u { + u64 ii_ixsm_regval; + struct { + u64 i_byte_en:32; + u64 i_reserved:1; + u64 i_tag:3; + u64 i_alt_pactyp:4; + u64 i_bo:1; + u64 i_error:1; + u64 i_vbpm:1; + u64 i_gbr:1; + u64 i_ds:2; + u64 i_ct:1; + u64 i_tnum:5; + u64 i_pactyp:4; + u64 i_sidn:4; + u64 i_didn:4; + } ii_ixsm_fld_s; +} ii_ixsm_u_t; + +/************************************************************************ + * * + * This register contains the sideband bits of a spurious read * + * response received from Crosstalk. * + * * + ************************************************************************/ + +typedef union ii_ixss_u { + u64 ii_ixss_regval; + struct { + u64 i_sideband:8; + u64 i_rsvd:55; + u64 i_valid:1; + } ii_ixss_fld_s; +} ii_ixss_u_t; + +/************************************************************************ + * * + * This register enables software to access the II LLP's test port. * + * Refer to the LLP 2.5 documentation for an explanation of the test * + * port. Software can write to this register to program the values * + * for the control fields (TestErrCapture, TestClear, TestFlit, * + * TestMask and TestSeed). Similarly, software can read from this * + * register to obtain the values of the test port's status outputs * + * (TestCBerr, TestValid and TestData). * + * * + ************************************************************************/ + +typedef union ii_ilct_u { + u64 ii_ilct_regval; + struct { + u64 i_test_seed:20; + u64 i_test_mask:8; + u64 i_test_data:20; + u64 i_test_valid:1; + u64 i_test_cberr:1; + u64 i_test_flit:3; + u64 i_test_clear:1; + u64 i_test_err_capture:1; + u64 i_rsvd:9; + } ii_ilct_fld_s; +} ii_ilct_u_t; + +/************************************************************************ + * * + * If the II detects an illegal incoming Duplonet packet (request or * + * reply) when VALID==0 in the IIEPH1 register, then it saves the * + * contents of the packet's header flit in the IIEPH1 and IIEPH2 * + * registers, sets the VALID bit in IIEPH1, clears the OVERRUN bit, * + * and assigns a value to the ERR_TYPE field which indicates the * + * specific nature of the error. The II recognizes four different * + * types of errors: short request packets (ERR_TYPE==2), short reply * + * packets (ERR_TYPE==3), long request packets (ERR_TYPE==4) and long * + * reply packets (ERR_TYPE==5). The encodings for these types of * + * errors were chosen to be consistent with the same types of errors * + * indicated by the ERR_TYPE field in the LB_ERROR_HDR1 register (in * + * the LB unit). If the II detects an illegal incoming Duplonet * + * packet when VALID==1 in the IIEPH1 register, then it merely sets * + * the OVERRUN bit to indicate that a subsequent error has happened, * + * and does nothing further. * + * * + ************************************************************************/ + +typedef union ii_iieph1_u { + u64 ii_iieph1_regval; + struct { + u64 i_command:7; + u64 i_rsvd_5:1; + u64 i_suppl:14; + u64 i_rsvd_4:1; + u64 i_source:14; + u64 i_rsvd_3:1; + u64 i_err_type:4; + u64 i_rsvd_2:4; + u64 i_overrun:1; + u64 i_rsvd_1:3; + u64 i_valid:1; + u64 i_rsvd:13; + } ii_iieph1_fld_s; +} ii_iieph1_u_t; + +/************************************************************************ + * * + * This register holds the Address field from the header flit of an * + * incoming erroneous Duplonet packet, along with the tail bit which * + * accompanied this header flit. This register is essentially an * + * extension of IIEPH1. Two registers were necessary because the 64 * + * bits available in only a single register were insufficient to * + * capture the entire header flit of an erroneous packet. * + * * + ************************************************************************/ + +typedef union ii_iieph2_u { + u64 ii_iieph2_regval; + struct { + u64 i_rsvd_0:3; + u64 i_address:47; + u64 i_rsvd_1:10; + u64 i_tail:1; + u64 i_rsvd:3; + } ii_iieph2_fld_s; +} ii_iieph2_u_t; + +/******************************/ + +/************************************************************************ + * * + * This register's value is a bit vector that guards access from SXBs * + * to local registers within the II as well as to external Crosstalk * + * widgets * + * * + ************************************************************************/ + +typedef union ii_islapr_u { + u64 ii_islapr_regval; + struct { + u64 i_region:64; + } ii_islapr_fld_s; +} ii_islapr_u_t; + +/************************************************************************ + * * + * A write to this register of the 56-bit value "Pup+Bun" will cause * + * the bit in the ISLAPR register corresponding to the region of the * + * requestor to be set (access allowed). ( + * * + ************************************************************************/ + +typedef union ii_islapo_u { + u64 ii_islapo_regval; + struct { + u64 i_io_sbx_ovrride:56; + u64 i_rsvd:8; + } ii_islapo_fld_s; +} ii_islapo_u_t; + +/************************************************************************ + * * + * Determines how long the wrapper will wait aftr an interrupt is * + * initially issued from the II before it times out the outstanding * + * interrupt and drops it from the interrupt queue. * + * * + ************************************************************************/ + +typedef union ii_iwi_u { + u64 ii_iwi_regval; + struct { + u64 i_prescale:24; + u64 i_rsvd:8; + u64 i_timeout:8; + u64 i_rsvd1:8; + u64 i_intrpt_retry_period:8; + u64 i_rsvd2:8; + } ii_iwi_fld_s; +} ii_iwi_u_t; + +/************************************************************************ + * * + * Log errors which have occurred in the II wrapper. The errors are * + * cleared by writing to the IECLR register. * + * * + ************************************************************************/ + +typedef union ii_iwel_u { + u64 ii_iwel_regval; + struct { + u64 i_intr_timed_out:1; + u64 i_rsvd:7; + u64 i_cam_overflow:1; + u64 i_cam_read_miss:1; + u64 i_rsvd1:2; + u64 i_ioq_rep_underflow:1; + u64 i_ioq_req_underflow:1; + u64 i_ioq_rep_overflow:1; + u64 i_ioq_req_overflow:1; + u64 i_iiq_rep_overflow:1; + u64 i_iiq_req_overflow:1; + u64 i_rsvd2:6; + u64 i_ii_xn_rep_cred_over_under:1; + u64 i_ii_xn_req_cred_over_under:1; + u64 i_rsvd3:6; + u64 i_ii_xn_invalid_cmd:1; + u64 i_xn_ii_invalid_cmd:1; + u64 i_rsvd4:30; + } ii_iwel_fld_s; +} ii_iwel_u_t; + +/************************************************************************ + * * + * Controls the II wrapper. * + * * + ************************************************************************/ + +typedef union ii_iwc_u { + u64 ii_iwc_regval; + struct { + u64 i_dma_byte_swap:1; + u64 i_rsvd:3; + u64 i_cam_read_lines_reset:1; + u64 i_rsvd1:3; + u64 i_ii_xn_cred_over_under_log:1; + u64 i_rsvd2:19; + u64 i_xn_rep_iq_depth:5; + u64 i_rsvd3:3; + u64 i_xn_req_iq_depth:5; + u64 i_rsvd4:3; + u64 i_iiq_depth:6; + u64 i_rsvd5:12; + u64 i_force_rep_cred:1; + u64 i_force_req_cred:1; + } ii_iwc_fld_s; +} ii_iwc_u_t; + +/************************************************************************ + * * + * Status in the II wrapper. * + * * + ************************************************************************/ + +typedef union ii_iws_u { + u64 ii_iws_regval; + struct { + u64 i_xn_rep_iq_credits:5; + u64 i_rsvd:3; + u64 i_xn_req_iq_credits:5; + u64 i_rsvd1:51; + } ii_iws_fld_s; +} ii_iws_u_t; + +/************************************************************************ + * * + * Masks errors in the IWEL register. * + * * + ************************************************************************/ + +typedef union ii_iweim_u { + u64 ii_iweim_regval; + struct { + u64 i_intr_timed_out:1; + u64 i_rsvd:7; + u64 i_cam_overflow:1; + u64 i_cam_read_miss:1; + u64 i_rsvd1:2; + u64 i_ioq_rep_underflow:1; + u64 i_ioq_req_underflow:1; + u64 i_ioq_rep_overflow:1; + u64 i_ioq_req_overflow:1; + u64 i_iiq_rep_overflow:1; + u64 i_iiq_req_overflow:1; + u64 i_rsvd2:6; + u64 i_ii_xn_rep_cred_overflow:1; + u64 i_ii_xn_req_cred_overflow:1; + u64 i_rsvd3:6; + u64 i_ii_xn_invalid_cmd:1; + u64 i_xn_ii_invalid_cmd:1; + u64 i_rsvd4:30; + } ii_iweim_fld_s; +} ii_iweim_u_t; + +/************************************************************************ + * * + * A write to this register causes a particular field in the * + * corresponding widget's PRB entry to be adjusted up or down by 1. * + * This counter should be used when recovering from error and reset * + * conditions. Note that software would be capable of causing * + * inadvertent overflow or underflow of these counters. * + * * + ************************************************************************/ + +typedef union ii_ipca_u { + u64 ii_ipca_regval; + struct { + u64 i_wid:4; + u64 i_adjust:1; + u64 i_rsvd_1:3; + u64 i_field:2; + u64 i_rsvd:54; + } ii_ipca_fld_s; +} ii_ipca_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte0a_u { + u64 ii_iprte0a_regval; + struct { + u64 i_rsvd_1:54; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } ii_iprte0a_fld_s; +} ii_iprte0a_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte1a_u { + u64 ii_iprte1a_regval; + struct { + u64 i_rsvd_1:54; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } ii_iprte1a_fld_s; +} ii_iprte1a_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte2a_u { + u64 ii_iprte2a_regval; + struct { + u64 i_rsvd_1:54; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } ii_iprte2a_fld_s; +} ii_iprte2a_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte3a_u { + u64 ii_iprte3a_regval; + struct { + u64 i_rsvd_1:54; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } ii_iprte3a_fld_s; +} ii_iprte3a_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte4a_u { + u64 ii_iprte4a_regval; + struct { + u64 i_rsvd_1:54; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } ii_iprte4a_fld_s; +} ii_iprte4a_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte5a_u { + u64 ii_iprte5a_regval; + struct { + u64 i_rsvd_1:54; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } ii_iprte5a_fld_s; +} ii_iprte5a_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte6a_u { + u64 ii_iprte6a_regval; + struct { + u64 i_rsvd_1:54; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } ii_iprte6a_fld_s; +} ii_iprte6a_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte7a_u { + u64 ii_iprte7a_regval; + struct { + u64 i_rsvd_1:54; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } ii_iprtea7_fld_s; +} ii_iprte7a_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte0b_u { + u64 ii_iprte0b_regval; + struct { + u64 i_rsvd_1:3; + u64 i_address:47; + u64 i_init:3; + u64 i_source:11; + } ii_iprte0b_fld_s; +} ii_iprte0b_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte1b_u { + u64 ii_iprte1b_regval; + struct { + u64 i_rsvd_1:3; + u64 i_address:47; + u64 i_init:3; + u64 i_source:11; + } ii_iprte1b_fld_s; +} ii_iprte1b_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte2b_u { + u64 ii_iprte2b_regval; + struct { + u64 i_rsvd_1:3; + u64 i_address:47; + u64 i_init:3; + u64 i_source:11; + } ii_iprte2b_fld_s; +} ii_iprte2b_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte3b_u { + u64 ii_iprte3b_regval; + struct { + u64 i_rsvd_1:3; + u64 i_address:47; + u64 i_init:3; + u64 i_source:11; + } ii_iprte3b_fld_s; +} ii_iprte3b_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte4b_u { + u64 ii_iprte4b_regval; + struct { + u64 i_rsvd_1:3; + u64 i_address:47; + u64 i_init:3; + u64 i_source:11; + } ii_iprte4b_fld_s; +} ii_iprte4b_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte5b_u { + u64 ii_iprte5b_regval; + struct { + u64 i_rsvd_1:3; + u64 i_address:47; + u64 i_init:3; + u64 i_source:11; + } ii_iprte5b_fld_s; +} ii_iprte5b_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte6b_u { + u64 ii_iprte6b_regval; + struct { + u64 i_rsvd_1:3; + u64 i_address:47; + u64 i_init:3; + u64 i_source:11; + + } ii_iprte6b_fld_s; +} ii_iprte6b_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte7b_u { + u64 ii_iprte7b_regval; + struct { + u64 i_rsvd_1:3; + u64 i_address:47; + u64 i_init:3; + u64 i_source:11; + } ii_iprte7b_fld_s; +} ii_iprte7b_u_t; + +/************************************************************************ + * * + * Description: SHub II contains a feature which did not exist in * + * the Hub which automatically cleans up after a Read Response * + * timeout, including deallocation of the IPRTE and recovery of IBuf * + * space. The inclusion of this register in SHub is for backward * + * compatibility * + * A write to this register causes an entry from the table of * + * outstanding PIO Read Requests to be freed and returned to the * + * stack of free entries. This register is used in handling the * + * timeout errors that result in a PIO Reply never returning from * + * Crosstalk. * + * Note that this register does not affect the contents of the IPRTE * + * registers. The Valid bits in those registers have to be * + * specifically turned off by software. * + * * + ************************************************************************/ + +typedef union ii_ipdr_u { + u64 ii_ipdr_regval; + struct { + u64 i_te:3; + u64 i_rsvd_1:1; + u64 i_pnd:1; + u64 i_init_rpcnt:1; + u64 i_rsvd:58; + } ii_ipdr_fld_s; +} ii_ipdr_u_t; + +/************************************************************************ + * * + * A write to this register causes a CRB entry to be returned to the * + * queue of free CRBs. The entry should have previously been cleared * + * (mark bit) via backdoor access to the pertinent CRB entry. This * + * register is used in the last step of handling the errors that are * + * captured and marked in CRB entries. Briefly: 1) first error for * + * DMA write from a particular device, and first error for a * + * particular BTE stream, lead to a marked CRB entry, and processor * + * interrupt, 2) software reads the error information captured in the * + * CRB entry, and presumably takes some corrective action, 3) * + * software clears the mark bit, and finally 4) software writes to * + * the ICDR register to return the CRB entry to the list of free CRB * + * entries. * + * * + ************************************************************************/ + +typedef union ii_icdr_u { + u64 ii_icdr_regval; + struct { + u64 i_crb_num:4; + u64 i_pnd:1; + u64 i_rsvd:59; + } ii_icdr_fld_s; +} ii_icdr_u_t; + +/************************************************************************ + * * + * This register provides debug access to two FIFOs inside of II. * + * Both IOQ_MAX* fields of this register contain the instantaneous * + * depth (in units of the number of available entries) of the * + * associated IOQ FIFO. A read of this register will return the * + * number of free entries on each FIFO at the time of the read. So * + * when a FIFO is idle, the associated field contains the maximum * + * depth of the FIFO. This register is writable for debug reasons * + * and is intended to be written with the maximum desired FIFO depth * + * while the FIFO is idle. Software must assure that II is idle when * + * this register is written. If there are any active entries in any * + * of these FIFOs when this register is written, the results are * + * undefined. * + * * + ************************************************************************/ + +typedef union ii_ifdr_u { + u64 ii_ifdr_regval; + struct { + u64 i_ioq_max_rq:7; + u64 i_set_ioq_rq:1; + u64 i_ioq_max_rp:7; + u64 i_set_ioq_rp:1; + u64 i_rsvd:48; + } ii_ifdr_fld_s; +} ii_ifdr_u_t; + +/************************************************************************ + * * + * This register allows the II to become sluggish in removing * + * messages from its inbound queue (IIQ). This will cause messages to * + * back up in either virtual channel. Disabling the "molasses" mode * + * subsequently allows the II to be tested under stress. In the * + * sluggish ("Molasses") mode, the localized effects of congestion * + * can be observed. * + * * + ************************************************************************/ + +typedef union ii_iiap_u { + u64 ii_iiap_regval; + struct { + u64 i_rq_mls:6; + u64 i_rsvd_1:2; + u64 i_rp_mls:6; + u64 i_rsvd:50; + } ii_iiap_fld_s; +} ii_iiap_u_t; + +/************************************************************************ + * * + * This register allows several parameters of CRB operation to be * + * set. Note that writing to this register can have catastrophic side * + * effects, if the CRB is not quiescent, i.e. if the CRB is * + * processing protocol messages when the write occurs. * + * * + ************************************************************************/ + +typedef union ii_icmr_u { + u64 ii_icmr_regval; + struct { + u64 i_sp_msg:1; + u64 i_rd_hdr:1; + u64 i_rsvd_4:2; + u64 i_c_cnt:4; + u64 i_rsvd_3:4; + u64 i_clr_rqpd:1; + u64 i_clr_rppd:1; + u64 i_rsvd_2:2; + u64 i_fc_cnt:4; + u64 i_crb_vld:15; + u64 i_crb_mark:15; + u64 i_rsvd_1:2; + u64 i_precise:1; + u64 i_rsvd:11; + } ii_icmr_fld_s; +} ii_icmr_u_t; + +/************************************************************************ + * * + * This register allows control of the table portion of the CRB * + * logic via software. Control operations from this register have * + * priority over all incoming Crosstalk or BTE requests. * + * * + ************************************************************************/ + +typedef union ii_iccr_u { + u64 ii_iccr_regval; + struct { + u64 i_crb_num:4; + u64 i_rsvd_1:4; + u64 i_cmd:8; + u64 i_pending:1; + u64 i_rsvd:47; + } ii_iccr_fld_s; +} ii_iccr_u_t; + +/************************************************************************ + * * + * This register allows the maximum timeout value to be programmed. * + * * + ************************************************************************/ + +typedef union ii_icto_u { + u64 ii_icto_regval; + struct { + u64 i_timeout:8; + u64 i_rsvd:56; + } ii_icto_fld_s; +} ii_icto_u_t; + +/************************************************************************ + * * + * This register allows the timeout prescalar to be programmed. An * + * internal counter is associated with this register. When the * + * internal counter reaches the value of the PRESCALE field, the * + * timer registers in all valid CRBs are incremented (CRBx_D[TIMEOUT] * + * field). The internal counter resets to zero, and then continues * + * counting. * + * * + ************************************************************************/ + +typedef union ii_ictp_u { + u64 ii_ictp_regval; + struct { + u64 i_prescale:24; + u64 i_rsvd:40; + } ii_ictp_fld_s; +} ii_ictp_u_t; + +/************************************************************************ + * * + * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * + * used for Crosstalk operations (both cacheline and partial * + * operations) or BTE/IO. Because the CRB entries are very wide, five * + * registers (_A to _E) are required to read and write each entry. * + * The CRB Entry registers can be conceptualized as rows and columns * + * (illustrated in the table above). Each row contains the 4 * + * registers required for a single CRB Entry. The first doubleword * + * (column) for each entry is labeled A, and the second doubleword * + * (higher address) is labeled B, the third doubleword is labeled C, * + * the fourth doubleword is labeled D and the fifth doubleword is * + * labeled E. All CRB entries have their addresses on a quarter * + * cacheline aligned boundary. * + * Upon reset, only the following fields are initialized: valid * + * (VLD), priority count, timeout, timeout valid, and context valid. * + * All other bits should be cleared by software before use (after * + * recovering any potential error state from before the reset). * + * The following four tables summarize the format for the four * + * registers that are used for each ICRB# Entry. * + * * + ************************************************************************/ + +typedef union ii_icrb0_a_u { + u64 ii_icrb0_a_regval; + struct { + u64 ia_iow:1; + u64 ia_vld:1; + u64 ia_addr:47; + u64 ia_tnum:5; + u64 ia_sidn:4; + u64 ia_rsvd:6; + } ii_icrb0_a_fld_s; +} ii_icrb0_a_u_t; + +/************************************************************************ + * * + * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * + * used for Crosstalk operations (both cacheline and partial * + * operations) or BTE/IO. Because the CRB entries are very wide, five * + * registers (_A to _E) are required to read and write each entry. * + * * + ************************************************************************/ + +typedef union ii_icrb0_b_u { + u64 ii_icrb0_b_regval; + struct { + u64 ib_xt_err:1; + u64 ib_mark:1; + u64 ib_ln_uce:1; + u64 ib_errcode:3; + u64 ib_error:1; + u64 ib_stall__bte_1:1; + u64 ib_stall__bte_0:1; + u64 ib_stall__intr:1; + u64 ib_stall_ib:1; + u64 ib_intvn:1; + u64 ib_wb:1; + u64 ib_hold:1; + u64 ib_ack:1; + u64 ib_resp:1; + u64 ib_ack_cnt:11; + u64 ib_rsvd:7; + u64 ib_exc:5; + u64 ib_init:3; + u64 ib_imsg:8; + u64 ib_imsgtype:2; + u64 ib_use_old:1; + u64 ib_rsvd_1:11; + } ii_icrb0_b_fld_s; +} ii_icrb0_b_u_t; + +/************************************************************************ + * * + * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * + * used for Crosstalk operations (both cacheline and partial * + * operations) or BTE/IO. Because the CRB entries are very wide, five * + * registers (_A to _E) are required to read and write each entry. * + * * + ************************************************************************/ + +typedef union ii_icrb0_c_u { + u64 ii_icrb0_c_regval; + struct { + u64 ic_source:15; + u64 ic_size:2; + u64 ic_ct:1; + u64 ic_bte_num:1; + u64 ic_gbr:1; + u64 ic_resprqd:1; + u64 ic_bo:1; + u64 ic_suppl:15; + u64 ic_rsvd:27; + } ii_icrb0_c_fld_s; +} ii_icrb0_c_u_t; + +/************************************************************************ + * * + * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * + * used for Crosstalk operations (both cacheline and partial * + * operations) or BTE/IO. Because the CRB entries are very wide, five * + * registers (_A to _E) are required to read and write each entry. * + * * + ************************************************************************/ + +typedef union ii_icrb0_d_u { + u64 ii_icrb0_d_regval; + struct { + u64 id_pa_be:43; + u64 id_bte_op:1; + u64 id_pr_psc:4; + u64 id_pr_cnt:4; + u64 id_sleep:1; + u64 id_rsvd:11; + } ii_icrb0_d_fld_s; +} ii_icrb0_d_u_t; + +/************************************************************************ + * * + * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * + * used for Crosstalk operations (both cacheline and partial * + * operations) or BTE/IO. Because the CRB entries are very wide, five * + * registers (_A to _E) are required to read and write each entry. * + * * + ************************************************************************/ + +typedef union ii_icrb0_e_u { + u64 ii_icrb0_e_regval; + struct { + u64 ie_timeout:8; + u64 ie_context:15; + u64 ie_rsvd:1; + u64 ie_tvld:1; + u64 ie_cvld:1; + u64 ie_rsvd_0:38; + } ii_icrb0_e_fld_s; +} ii_icrb0_e_u_t; + +/************************************************************************ + * * + * This register contains the lower 64 bits of the header of the * + * spurious message captured by II. Valid when the SP_MSG bit in ICMR * + * register is set. * + * * + ************************************************************************/ + +typedef union ii_icsml_u { + u64 ii_icsml_regval; + struct { + u64 i_tt_addr:47; + u64 i_newsuppl_ex:14; + u64 i_reserved:2; + u64 i_overflow:1; + } ii_icsml_fld_s; +} ii_icsml_u_t; + +/************************************************************************ + * * + * This register contains the middle 64 bits of the header of the * + * spurious message captured by II. Valid when the SP_MSG bit in ICMR * + * register is set. * + * * + ************************************************************************/ + +typedef union ii_icsmm_u { + u64 ii_icsmm_regval; + struct { + u64 i_tt_ack_cnt:11; + u64 i_reserved:53; + } ii_icsmm_fld_s; +} ii_icsmm_u_t; + +/************************************************************************ + * * + * This register contains the microscopic state, all the inputs to * + * the protocol table, captured with the spurious message. Valid when * + * the SP_MSG bit in the ICMR register is set. * + * * + ************************************************************************/ + +typedef union ii_icsmh_u { + u64 ii_icsmh_regval; + struct { + u64 i_tt_vld:1; + u64 i_xerr:1; + u64 i_ft_cwact_o:1; + u64 i_ft_wact_o:1; + u64 i_ft_active_o:1; + u64 i_sync:1; + u64 i_mnusg:1; + u64 i_mnusz:1; + u64 i_plusz:1; + u64 i_plusg:1; + u64 i_tt_exc:5; + u64 i_tt_wb:1; + u64 i_tt_hold:1; + u64 i_tt_ack:1; + u64 i_tt_resp:1; + u64 i_tt_intvn:1; + u64 i_g_stall_bte1:1; + u64 i_g_stall_bte0:1; + u64 i_g_stall_il:1; + u64 i_g_stall_ib:1; + u64 i_tt_imsg:8; + u64 i_tt_imsgtype:2; + u64 i_tt_use_old:1; + u64 i_tt_respreqd:1; + u64 i_tt_bte_num:1; + u64 i_cbn:1; + u64 i_match:1; + u64 i_rpcnt_lt_34:1; + u64 i_rpcnt_ge_34:1; + u64 i_rpcnt_lt_18:1; + u64 i_rpcnt_ge_18:1; + u64 i_rpcnt_lt_2:1; + u64 i_rpcnt_ge_2:1; + u64 i_rqcnt_lt_18:1; + u64 i_rqcnt_ge_18:1; + u64 i_rqcnt_lt_2:1; + u64 i_rqcnt_ge_2:1; + u64 i_tt_device:7; + u64 i_tt_init:3; + u64 i_reserved:5; + } ii_icsmh_fld_s; +} ii_icsmh_u_t; + +/************************************************************************ + * * + * The Shub DEBUG unit provides a 3-bit selection signal to the * + * II core and a 3-bit selection signal to the fsbclk domain in the II * + * wrapper. * + * * + ************************************************************************/ + +typedef union ii_idbss_u { + u64 ii_idbss_regval; + struct { + u64 i_iioclk_core_submenu:3; + u64 i_rsvd:5; + u64 i_fsbclk_wrapper_submenu:3; + u64 i_rsvd_1:5; + u64 i_iioclk_menu:5; + u64 i_rsvd_2:43; + } ii_idbss_fld_s; +} ii_idbss_u_t; + +/************************************************************************ + * * + * Description: This register is used to set up the length for a * + * transfer and then to monitor the progress of that transfer. This * + * register needs to be initialized before a transfer is started. A * + * legitimate write to this register will set the Busy bit, clear the * + * Error bit, and initialize the length to the value desired. * + * While the transfer is in progress, hardware will decrement the * + * length field with each successful block that is copied. Once the * + * transfer completes, hardware will clear the Busy bit. The length * + * field will also contain the number of cache lines left to be * + * transferred. * + * * + ************************************************************************/ + +typedef union ii_ibls0_u { + u64 ii_ibls0_regval; + struct { + u64 i_length:16; + u64 i_error:1; + u64 i_rsvd_1:3; + u64 i_busy:1; + u64 i_rsvd:43; + } ii_ibls0_fld_s; +} ii_ibls0_u_t; + +/************************************************************************ + * * + * This register should be loaded before a transfer is started. The * + * address to be loaded in bits 39:0 is the 40-bit TRex+ physical * + * address as described in Section 1.3, Figure2 and Figure3. Since * + * the bottom 7 bits of the address are always taken to be zero, BTE * + * transfers are always cacheline-aligned. * + * * + ************************************************************************/ + +typedef union ii_ibsa0_u { + u64 ii_ibsa0_regval; + struct { + u64 i_rsvd_1:7; + u64 i_addr:42; + u64 i_rsvd:15; + } ii_ibsa0_fld_s; +} ii_ibsa0_u_t; + +/************************************************************************ + * * + * This register should be loaded before a transfer is started. The * + * address to be loaded in bits 39:0 is the 40-bit TRex+ physical * + * address as described in Section 1.3, Figure2 and Figure3. Since * + * the bottom 7 bits of the address are always taken to be zero, BTE * + * transfers are always cacheline-aligned. * + * * + ************************************************************************/ + +typedef union ii_ibda0_u { + u64 ii_ibda0_regval; + struct { + u64 i_rsvd_1:7; + u64 i_addr:42; + u64 i_rsvd:15; + } ii_ibda0_fld_s; +} ii_ibda0_u_t; + +/************************************************************************ + * * + * Writing to this register sets up the attributes of the transfer * + * and initiates the transfer operation. Reading this register has * + * the side effect of terminating any transfer in progress. Note: * + * stopping a transfer midstream could have an adverse impact on the * + * other BTE. If a BTE stream has to be stopped (due to error * + * handling for example), both BTE streams should be stopped and * + * their transfers discarded. * + * * + ************************************************************************/ + +typedef union ii_ibct0_u { + u64 ii_ibct0_regval; + struct { + u64 i_zerofill:1; + u64 i_rsvd_2:3; + u64 i_notify:1; + u64 i_rsvd_1:3; + u64 i_poison:1; + u64 i_rsvd:55; + } ii_ibct0_fld_s; +} ii_ibct0_u_t; + +/************************************************************************ + * * + * This register contains the address to which the WINV is sent. * + * This address has to be cache line aligned. * + * * + ************************************************************************/ + +typedef union ii_ibna0_u { + u64 ii_ibna0_regval; + struct { + u64 i_rsvd_1:7; + u64 i_addr:42; + u64 i_rsvd:15; + } ii_ibna0_fld_s; +} ii_ibna0_u_t; + +/************************************************************************ + * * + * This register contains the programmable level as well as the node * + * ID and PI unit of the processor to which the interrupt will be * + * sent. * + * * + ************************************************************************/ + +typedef union ii_ibia0_u { + u64 ii_ibia0_regval; + struct { + u64 i_rsvd_2:1; + u64 i_node_id:11; + u64 i_rsvd_1:4; + u64 i_level:7; + u64 i_rsvd:41; + } ii_ibia0_fld_s; +} ii_ibia0_u_t; + +/************************************************************************ + * * + * Description: This register is used to set up the length for a * + * transfer and then to monitor the progress of that transfer. This * + * register needs to be initialized before a transfer is started. A * + * legitimate write to this register will set the Busy bit, clear the * + * Error bit, and initialize the length to the value desired. * + * While the transfer is in progress, hardware will decrement the * + * length field with each successful block that is copied. Once the * + * transfer completes, hardware will clear the Busy bit. The length * + * field will also contain the number of cache lines left to be * + * transferred. * + * * + ************************************************************************/ + +typedef union ii_ibls1_u { + u64 ii_ibls1_regval; + struct { + u64 i_length:16; + u64 i_error:1; + u64 i_rsvd_1:3; + u64 i_busy:1; + u64 i_rsvd:43; + } ii_ibls1_fld_s; +} ii_ibls1_u_t; + +/************************************************************************ + * * + * This register should be loaded before a transfer is started. The * + * address to be loaded in bits 39:0 is the 40-bit TRex+ physical * + * address as described in Section 1.3, Figure2 and Figure3. Since * + * the bottom 7 bits of the address are always taken to be zero, BTE * + * transfers are always cacheline-aligned. * + * * + ************************************************************************/ + +typedef union ii_ibsa1_u { + u64 ii_ibsa1_regval; + struct { + u64 i_rsvd_1:7; + u64 i_addr:33; + u64 i_rsvd:24; + } ii_ibsa1_fld_s; +} ii_ibsa1_u_t; + +/************************************************************************ + * * + * This register should be loaded before a transfer is started. The * + * address to be loaded in bits 39:0 is the 40-bit TRex+ physical * + * address as described in Section 1.3, Figure2 and Figure3. Since * + * the bottom 7 bits of the address are always taken to be zero, BTE * + * transfers are always cacheline-aligned. * + * * + ************************************************************************/ + +typedef union ii_ibda1_u { + u64 ii_ibda1_regval; + struct { + u64 i_rsvd_1:7; + u64 i_addr:33; + u64 i_rsvd:24; + } ii_ibda1_fld_s; +} ii_ibda1_u_t; + +/************************************************************************ + * * + * Writing to this register sets up the attributes of the transfer * + * and initiates the transfer operation. Reading this register has * + * the side effect of terminating any transfer in progress. Note: * + * stopping a transfer midstream could have an adverse impact on the * + * other BTE. If a BTE stream has to be stopped (due to error * + * handling for example), both BTE streams should be stopped and * + * their transfers discarded. * + * * + ************************************************************************/ + +typedef union ii_ibct1_u { + u64 ii_ibct1_regval; + struct { + u64 i_zerofill:1; + u64 i_rsvd_2:3; + u64 i_notify:1; + u64 i_rsvd_1:3; + u64 i_poison:1; + u64 i_rsvd:55; + } ii_ibct1_fld_s; +} ii_ibct1_u_t; + +/************************************************************************ + * * + * This register contains the address to which the WINV is sent. * + * This address has to be cache line aligned. * + * * + ************************************************************************/ + +typedef union ii_ibna1_u { + u64 ii_ibna1_regval; + struct { + u64 i_rsvd_1:7; + u64 i_addr:33; + u64 i_rsvd:24; + } ii_ibna1_fld_s; +} ii_ibna1_u_t; + +/************************************************************************ + * * + * This register contains the programmable level as well as the node * + * ID and PI unit of the processor to which the interrupt will be * + * sent. * + * * + ************************************************************************/ + +typedef union ii_ibia1_u { + u64 ii_ibia1_regval; + struct { + u64 i_pi_id:1; + u64 i_node_id:8; + u64 i_rsvd_1:7; + u64 i_level:7; + u64 i_rsvd:41; + } ii_ibia1_fld_s; +} ii_ibia1_u_t; + +/************************************************************************ + * * + * This register defines the resources that feed information into * + * the two performance counters located in the IO Performance * + * Profiling Register. There are 17 different quantities that can be * + * measured. Given these 17 different options, the two performance * + * counters have 15 of them in common; menu selections 0 through 0xE * + * are identical for each performance counter. As for the other two * + * options, one is available from one performance counter and the * + * other is available from the other performance counter. Hence, the * + * II supports all 17*16=272 possible combinations of quantities to * + * measure. * + * * + ************************************************************************/ + +typedef union ii_ipcr_u { + u64 ii_ipcr_regval; + struct { + u64 i_ippr0_c:4; + u64 i_ippr1_c:4; + u64 i_icct:8; + u64 i_rsvd:48; + } ii_ipcr_fld_s; +} ii_ipcr_u_t; + +/************************************************************************ + * * + * * + * * + ************************************************************************/ + +typedef union ii_ippr_u { + u64 ii_ippr_regval; + struct { + u64 i_ippr0:32; + u64 i_ippr1:32; + } ii_ippr_fld_s; +} ii_ippr_u_t; + +/************************************************************************ + * * + * The following defines which were not formed into structures are * + * probably indentical to another register, and the name of the * + * register is provided against each of these registers. This * + * information needs to be checked carefully * + * * + * IIO_ICRB1_A IIO_ICRB0_A * + * IIO_ICRB1_B IIO_ICRB0_B * + * IIO_ICRB1_C IIO_ICRB0_C * + * IIO_ICRB1_D IIO_ICRB0_D * + * IIO_ICRB1_E IIO_ICRB0_E * + * IIO_ICRB2_A IIO_ICRB0_A * + * IIO_ICRB2_B IIO_ICRB0_B * + * IIO_ICRB2_C IIO_ICRB0_C * + * IIO_ICRB2_D IIO_ICRB0_D * + * IIO_ICRB2_E IIO_ICRB0_E * + * IIO_ICRB3_A IIO_ICRB0_A * + * IIO_ICRB3_B IIO_ICRB0_B * + * IIO_ICRB3_C IIO_ICRB0_C * + * IIO_ICRB3_D IIO_ICRB0_D * + * IIO_ICRB3_E IIO_ICRB0_E * + * IIO_ICRB4_A IIO_ICRB0_A * + * IIO_ICRB4_B IIO_ICRB0_B * + * IIO_ICRB4_C IIO_ICRB0_C * + * IIO_ICRB4_D IIO_ICRB0_D * + * IIO_ICRB4_E IIO_ICRB0_E * + * IIO_ICRB5_A IIO_ICRB0_A * + * IIO_ICRB5_B IIO_ICRB0_B * + * IIO_ICRB5_C IIO_ICRB0_C * + * IIO_ICRB5_D IIO_ICRB0_D * + * IIO_ICRB5_E IIO_ICRB0_E * + * IIO_ICRB6_A IIO_ICRB0_A * + * IIO_ICRB6_B IIO_ICRB0_B * + * IIO_ICRB6_C IIO_ICRB0_C * + * IIO_ICRB6_D IIO_ICRB0_D * + * IIO_ICRB6_E IIO_ICRB0_E * + * IIO_ICRB7_A IIO_ICRB0_A * + * IIO_ICRB7_B IIO_ICRB0_B * + * IIO_ICRB7_C IIO_ICRB0_C * + * IIO_ICRB7_D IIO_ICRB0_D * + * IIO_ICRB7_E IIO_ICRB0_E * + * IIO_ICRB8_A IIO_ICRB0_A * + * IIO_ICRB8_B IIO_ICRB0_B * + * IIO_ICRB8_C IIO_ICRB0_C * + * IIO_ICRB8_D IIO_ICRB0_D * + * IIO_ICRB8_E IIO_ICRB0_E * + * IIO_ICRB9_A IIO_ICRB0_A * + * IIO_ICRB9_B IIO_ICRB0_B * + * IIO_ICRB9_C IIO_ICRB0_C * + * IIO_ICRB9_D IIO_ICRB0_D * + * IIO_ICRB9_E IIO_ICRB0_E * + * IIO_ICRBA_A IIO_ICRB0_A * + * IIO_ICRBA_B IIO_ICRB0_B * + * IIO_ICRBA_C IIO_ICRB0_C * + * IIO_ICRBA_D IIO_ICRB0_D * + * IIO_ICRBA_E IIO_ICRB0_E * + * IIO_ICRBB_A IIO_ICRB0_A * + * IIO_ICRBB_B IIO_ICRB0_B * + * IIO_ICRBB_C IIO_ICRB0_C * + * IIO_ICRBB_D IIO_ICRB0_D * + * IIO_ICRBB_E IIO_ICRB0_E * + * IIO_ICRBC_A IIO_ICRB0_A * + * IIO_ICRBC_B IIO_ICRB0_B * + * IIO_ICRBC_C IIO_ICRB0_C * + * IIO_ICRBC_D IIO_ICRB0_D * + * IIO_ICRBC_E IIO_ICRB0_E * + * IIO_ICRBD_A IIO_ICRB0_A * + * IIO_ICRBD_B IIO_ICRB0_B * + * IIO_ICRBD_C IIO_ICRB0_C * + * IIO_ICRBD_D IIO_ICRB0_D * + * IIO_ICRBD_E IIO_ICRB0_E * + * IIO_ICRBE_A IIO_ICRB0_A * + * IIO_ICRBE_B IIO_ICRB0_B * + * IIO_ICRBE_C IIO_ICRB0_C * + * IIO_ICRBE_D IIO_ICRB0_D * + * IIO_ICRBE_E IIO_ICRB0_E * + * * + ************************************************************************/ + +/* + * Slightly friendlier names for some common registers. + */ +#define IIO_WIDGET IIO_WID /* Widget identification */ +#define IIO_WIDGET_STAT IIO_WSTAT /* Widget status register */ +#define IIO_WIDGET_CTRL IIO_WCR /* Widget control register */ +#define IIO_PROTECT IIO_ILAPR /* IO interface protection */ +#define IIO_PROTECT_OVRRD IIO_ILAPO /* IO protect override */ +#define IIO_OUTWIDGET_ACCESS IIO_IOWA /* Outbound widget access */ +#define IIO_INWIDGET_ACCESS IIO_IIWA /* Inbound widget access */ +#define IIO_INDEV_ERR_MASK IIO_IIDEM /* Inbound device error mask */ +#define IIO_LLP_CSR IIO_ILCSR /* LLP control and status */ +#define IIO_LLP_LOG IIO_ILLR /* LLP log */ +#define IIO_XTALKCC_TOUT IIO_IXCC /* Xtalk credit count timeout */ +#define IIO_XTALKTT_TOUT IIO_IXTT /* Xtalk tail timeout */ +#define IIO_IO_ERR_CLR IIO_IECLR /* IO error clear */ +#define IIO_IGFX_0 IIO_IGFX0 +#define IIO_IGFX_1 IIO_IGFX1 +#define IIO_IBCT_0 IIO_IBCT0 +#define IIO_IBCT_1 IIO_IBCT1 +#define IIO_IBLS_0 IIO_IBLS0 +#define IIO_IBLS_1 IIO_IBLS1 +#define IIO_IBSA_0 IIO_IBSA0 +#define IIO_IBSA_1 IIO_IBSA1 +#define IIO_IBDA_0 IIO_IBDA0 +#define IIO_IBDA_1 IIO_IBDA1 +#define IIO_IBNA_0 IIO_IBNA0 +#define IIO_IBNA_1 IIO_IBNA1 +#define IIO_IBIA_0 IIO_IBIA0 +#define IIO_IBIA_1 IIO_IBIA1 +#define IIO_IOPRB_0 IIO_IPRB0 + +#define IIO_PRTE_A(_x) (IIO_IPRTE0_A + (8 * (_x))) +#define IIO_PRTE_B(_x) (IIO_IPRTE0_B + (8 * (_x))) +#define IIO_NUM_PRTES 8 /* Total number of PRB table entries */ +#define IIO_WIDPRTE_A(x) IIO_PRTE_A(((x) - 8)) /* widget ID to its PRTE num */ +#define IIO_WIDPRTE_B(x) IIO_PRTE_B(((x) - 8)) /* widget ID to its PRTE num */ + +#define IIO_NUM_IPRBS 9 + +#define IIO_LLP_CSR_IS_UP 0x00002000 +#define IIO_LLP_CSR_LLP_STAT_MASK 0x00003000 +#define IIO_LLP_CSR_LLP_STAT_SHFT 12 + +#define IIO_LLP_CB_MAX 0xffff /* in ILLR CB_CNT, Max Check Bit errors */ +#define IIO_LLP_SN_MAX 0xffff /* in ILLR SN_CNT, Max Sequence Number errors */ + +/* key to IIO_PROTECT_OVRRD */ +#define IIO_PROTECT_OVRRD_KEY 0x53474972756c6573ull /* "SGIrules" */ + +/* BTE register names */ +#define IIO_BTE_STAT_0 IIO_IBLS_0 /* Also BTE length/status 0 */ +#define IIO_BTE_SRC_0 IIO_IBSA_0 /* Also BTE source address 0 */ +#define IIO_BTE_DEST_0 IIO_IBDA_0 /* Also BTE dest. address 0 */ +#define IIO_BTE_CTRL_0 IIO_IBCT_0 /* Also BTE control/terminate 0 */ +#define IIO_BTE_NOTIFY_0 IIO_IBNA_0 /* Also BTE notification 0 */ +#define IIO_BTE_INT_0 IIO_IBIA_0 /* Also BTE interrupt 0 */ +#define IIO_BTE_OFF_0 0 /* Base offset from BTE 0 regs. */ +#define IIO_BTE_OFF_1 (IIO_IBLS_1 - IIO_IBLS_0) /* Offset from base to BTE 1 */ + +/* BTE register offsets from base */ +#define BTEOFF_STAT 0 +#define BTEOFF_SRC (IIO_BTE_SRC_0 - IIO_BTE_STAT_0) +#define BTEOFF_DEST (IIO_BTE_DEST_0 - IIO_BTE_STAT_0) +#define BTEOFF_CTRL (IIO_BTE_CTRL_0 - IIO_BTE_STAT_0) +#define BTEOFF_NOTIFY (IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0) +#define BTEOFF_INT (IIO_BTE_INT_0 - IIO_BTE_STAT_0) + +/* names used in shub diags */ +#define IIO_BASE_BTE0 IIO_IBLS_0 +#define IIO_BASE_BTE1 IIO_IBLS_1 + +/* + * Macro which takes the widget number, and returns the + * IO PRB address of that widget. + * value _x is expected to be a widget number in the range + * 0, 8 - 0xF + */ +#define IIO_IOPRB(_x) (IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \ + (_x) : \ + (_x) - (HUB_WIDGET_ID_MIN-1)) << 3) ) + +/* GFX Flow Control Node/Widget Register */ +#define IIO_IGFX_W_NUM_BITS 4 /* size of widget num field */ +#define IIO_IGFX_W_NUM_MASK ((1<<IIO_IGFX_W_NUM_BITS)-1) +#define IIO_IGFX_W_NUM_SHIFT 0 +#define IIO_IGFX_PI_NUM_BITS 1 /* size of PI num field */ +#define IIO_IGFX_PI_NUM_MASK ((1<<IIO_IGFX_PI_NUM_BITS)-1) +#define IIO_IGFX_PI_NUM_SHIFT 4 +#define IIO_IGFX_N_NUM_BITS 8 /* size of node num field */ +#define IIO_IGFX_N_NUM_MASK ((1<<IIO_IGFX_N_NUM_BITS)-1) +#define IIO_IGFX_N_NUM_SHIFT 5 +#define IIO_IGFX_P_NUM_BITS 1 /* size of processor num field */ +#define IIO_IGFX_P_NUM_MASK ((1<<IIO_IGFX_P_NUM_BITS)-1) +#define IIO_IGFX_P_NUM_SHIFT 16 +#define IIO_IGFX_INIT(widget, pi, node, cpu) (\ + (((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) | \ + (((pi) & IIO_IGFX_PI_NUM_MASK)<< IIO_IGFX_PI_NUM_SHIFT)| \ + (((node) & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) | \ + (((cpu) & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT)) + +/* Scratch registers (all bits available) */ +#define IIO_SCRATCH_REG0 IIO_ISCR0 +#define IIO_SCRATCH_REG1 IIO_ISCR1 +#define IIO_SCRATCH_MASK 0xffffffffffffffffUL + +#define IIO_SCRATCH_BIT0_0 0x0000000000000001UL +#define IIO_SCRATCH_BIT0_1 0x0000000000000002UL +#define IIO_SCRATCH_BIT0_2 0x0000000000000004UL +#define IIO_SCRATCH_BIT0_3 0x0000000000000008UL +#define IIO_SCRATCH_BIT0_4 0x0000000000000010UL +#define IIO_SCRATCH_BIT0_5 0x0000000000000020UL +#define IIO_SCRATCH_BIT0_6 0x0000000000000040UL +#define IIO_SCRATCH_BIT0_7 0x0000000000000080UL +#define IIO_SCRATCH_BIT0_8 0x0000000000000100UL +#define IIO_SCRATCH_BIT0_9 0x0000000000000200UL +#define IIO_SCRATCH_BIT0_A 0x0000000000000400UL + +#define IIO_SCRATCH_BIT1_0 0x0000000000000001UL +#define IIO_SCRATCH_BIT1_1 0x0000000000000002UL +/* IO Translation Table Entries */ +#define IIO_NUM_ITTES 7 /* ITTEs numbered 0..6 */ + /* Hw manuals number them 1..7! */ +/* + * IIO_IMEM Register fields. + */ +#define IIO_IMEM_W0ESD 0x1UL /* Widget 0 shut down due to error */ +#define IIO_IMEM_B0ESD (1UL << 4) /* BTE 0 shut down due to error */ +#define IIO_IMEM_B1ESD (1UL << 8) /* BTE 1 Shut down due to error */ + +/* + * As a permanent workaround for a bug in the PI side of the shub, we've + * redefined big window 7 as small window 0. + XXX does this still apply for SN1?? + */ +#define HUB_NUM_BIG_WINDOW (IIO_NUM_ITTES - 1) + +/* + * Use the top big window as a surrogate for the first small window + */ +#define SWIN0_BIGWIN HUB_NUM_BIG_WINDOW + +#define ILCSR_WARM_RESET 0x100 + +/* + * CRB manipulation macros + * The CRB macros are slightly complicated, since there are up to + * four registers associated with each CRB entry. + */ +#define IIO_NUM_CRBS 15 /* Number of CRBs */ +#define IIO_NUM_PC_CRBS 4 /* Number of partial cache CRBs */ +#define IIO_ICRB_OFFSET 8 +#define IIO_ICRB_0 IIO_ICRB0_A +#define IIO_ICRB_ADDR_SHFT 2 /* Shift to get proper address */ +/* XXX - This is now tuneable: + #define IIO_FIRST_PC_ENTRY 12 + */ + +#define IIO_ICRB_A(_x) ((u64)(IIO_ICRB_0 + (6 * IIO_ICRB_OFFSET * (_x)))) +#define IIO_ICRB_B(_x) ((u64)((char *)IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET)) +#define IIO_ICRB_C(_x) ((u64)((char *)IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET)) +#define IIO_ICRB_D(_x) ((u64)((char *)IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET)) +#define IIO_ICRB_E(_x) ((u64)((char *)IIO_ICRB_A(_x) + 4*IIO_ICRB_OFFSET)) + +#define TNUM_TO_WIDGET_DEV(_tnum) (_tnum & 0x7) + +/* + * values for "ecode" field + */ +#define IIO_ICRB_ECODE_DERR 0 /* Directory error due to IIO access */ +#define IIO_ICRB_ECODE_PERR 1 /* Poison error on IO access */ +#define IIO_ICRB_ECODE_WERR 2 /* Write error by IIO access + * e.g. WINV to a Read only line. */ +#define IIO_ICRB_ECODE_AERR 3 /* Access error caused by IIO access */ +#define IIO_ICRB_ECODE_PWERR 4 /* Error on partial write */ +#define IIO_ICRB_ECODE_PRERR 5 /* Error on partial read */ +#define IIO_ICRB_ECODE_TOUT 6 /* CRB timeout before deallocating */ +#define IIO_ICRB_ECODE_XTERR 7 /* Incoming xtalk pkt had error bit */ + +/* + * Values for field imsgtype + */ +#define IIO_ICRB_IMSGT_XTALK 0 /* Incoming Meessage from Xtalk */ +#define IIO_ICRB_IMSGT_BTE 1 /* Incoming message from BTE */ +#define IIO_ICRB_IMSGT_SN1NET 2 /* Incoming message from SN1 net */ +#define IIO_ICRB_IMSGT_CRB 3 /* Incoming message from CRB ??? */ + +/* + * values for field initiator. + */ +#define IIO_ICRB_INIT_XTALK 0 /* Message originated in xtalk */ +#define IIO_ICRB_INIT_BTE0 0x1 /* Message originated in BTE 0 */ +#define IIO_ICRB_INIT_SN1NET 0x2 /* Message originated in SN1net */ +#define IIO_ICRB_INIT_CRB 0x3 /* Message originated in CRB ? */ +#define IIO_ICRB_INIT_BTE1 0x5 /* MEssage originated in BTE 1 */ + +/* + * Number of credits Hub widget has while sending req/response to + * xbow. + * Value of 3 is required by Xbow 1.1 + * We may be able to increase this to 4 with Xbow 1.2. + */ +#define HUBII_XBOW_CREDIT 3 +#define HUBII_XBOW_REV2_CREDIT 4 + +/* + * Number of credits that xtalk devices should use when communicating + * with a SHub (depth of SHub's queue). + */ +#define HUB_CREDIT 4 + +/* + * Some IIO_PRB fields + */ +#define IIO_PRB_MULTI_ERR (1LL << 63) +#define IIO_PRB_SPUR_RD (1LL << 51) +#define IIO_PRB_SPUR_WR (1LL << 50) +#define IIO_PRB_RD_TO (1LL << 49) +#define IIO_PRB_ERROR (1LL << 48) + +/************************************************************************* + + Some of the IIO field masks and shifts are defined here. + This is in order to maintain compatibility in SN0 and SN1 code + +**************************************************************************/ + +/* + * ICMR register fields + * (Note: the IIO_ICMR_P_CNT and IIO_ICMR_PC_VLD from Hub are not + * present in SHub) + */ + +#define IIO_ICMR_CRB_VLD_SHFT 20 +#define IIO_ICMR_CRB_VLD_MASK (0x7fffUL << IIO_ICMR_CRB_VLD_SHFT) + +#define IIO_ICMR_FC_CNT_SHFT 16 +#define IIO_ICMR_FC_CNT_MASK (0xf << IIO_ICMR_FC_CNT_SHFT) + +#define IIO_ICMR_C_CNT_SHFT 4 +#define IIO_ICMR_C_CNT_MASK (0xf << IIO_ICMR_C_CNT_SHFT) + +#define IIO_ICMR_PRECISE (1UL << 52) +#define IIO_ICMR_CLR_RPPD (1UL << 13) +#define IIO_ICMR_CLR_RQPD (1UL << 12) + +/* + * IIO PIO Deallocation register field masks : (IIO_IPDR) + XXX present but not needed in bedrock? See the manual. + */ +#define IIO_IPDR_PND (1 << 4) + +/* + * IIO CRB deallocation register field masks: (IIO_ICDR) + */ +#define IIO_ICDR_PND (1 << 4) + +/* + * IO BTE Length/Status (IIO_IBLS) register bit field definitions + */ +#define IBLS_BUSY (0x1UL << 20) +#define IBLS_ERROR_SHFT 16 +#define IBLS_ERROR (0x1UL << IBLS_ERROR_SHFT) +#define IBLS_LENGTH_MASK 0xffff + +/* + * IO BTE Control/Terminate register (IBCT) register bit field definitions + */ +#define IBCT_POISON (0x1UL << 8) +#define IBCT_NOTIFY (0x1UL << 4) +#define IBCT_ZFIL_MODE (0x1UL << 0) + +/* + * IIO Incoming Error Packet Header (IIO_IIEPH1/IIO_IIEPH2) + */ +#define IIEPH1_VALID (1UL << 44) +#define IIEPH1_OVERRUN (1UL << 40) +#define IIEPH1_ERR_TYPE_SHFT 32 +#define IIEPH1_ERR_TYPE_MASK 0xf +#define IIEPH1_SOURCE_SHFT 20 +#define IIEPH1_SOURCE_MASK 11 +#define IIEPH1_SUPPL_SHFT 8 +#define IIEPH1_SUPPL_MASK 11 +#define IIEPH1_CMD_SHFT 0 +#define IIEPH1_CMD_MASK 7 + +#define IIEPH2_TAIL (1UL << 40) +#define IIEPH2_ADDRESS_SHFT 0 +#define IIEPH2_ADDRESS_MASK 38 + +#define IIEPH1_ERR_SHORT_REQ 2 +#define IIEPH1_ERR_SHORT_REPLY 3 +#define IIEPH1_ERR_LONG_REQ 4 +#define IIEPH1_ERR_LONG_REPLY 5 + +/* + * IO Error Clear register bit field definitions + */ +#define IECLR_PI1_FWD_INT (1UL << 31) /* clear PI1_FORWARD_INT in iidsr */ +#define IECLR_PI0_FWD_INT (1UL << 30) /* clear PI0_FORWARD_INT in iidsr */ +#define IECLR_SPUR_RD_HDR (1UL << 29) /* clear valid bit in ixss reg */ +#define IECLR_BTE1 (1UL << 18) /* clear bte error 1 */ +#define IECLR_BTE0 (1UL << 17) /* clear bte error 0 */ +#define IECLR_CRAZY (1UL << 16) /* clear crazy bit in wstat reg */ +#define IECLR_PRB_F (1UL << 15) /* clear err bit in PRB_F reg */ +#define IECLR_PRB_E (1UL << 14) /* clear err bit in PRB_E reg */ +#define IECLR_PRB_D (1UL << 13) /* clear err bit in PRB_D reg */ +#define IECLR_PRB_C (1UL << 12) /* clear err bit in PRB_C reg */ +#define IECLR_PRB_B (1UL << 11) /* clear err bit in PRB_B reg */ +#define IECLR_PRB_A (1UL << 10) /* clear err bit in PRB_A reg */ +#define IECLR_PRB_9 (1UL << 9) /* clear err bit in PRB_9 reg */ +#define IECLR_PRB_8 (1UL << 8) /* clear err bit in PRB_8 reg */ +#define IECLR_PRB_0 (1UL << 0) /* clear err bit in PRB_0 reg */ + +/* + * IIO CRB control register Fields: IIO_ICCR + */ +#define IIO_ICCR_PENDING 0x10000 +#define IIO_ICCR_CMD_MASK 0xFF +#define IIO_ICCR_CMD_SHFT 7 +#define IIO_ICCR_CMD_NOP 0x0 /* No Op */ +#define IIO_ICCR_CMD_WAKE 0x100 /* Reactivate CRB entry and process */ +#define IIO_ICCR_CMD_TIMEOUT 0x200 /* Make CRB timeout & mark invalid */ +#define IIO_ICCR_CMD_EJECT 0x400 /* Contents of entry written to memory + * via a WB + */ +#define IIO_ICCR_CMD_FLUSH 0x800 + +/* + * + * CRB Register description. + * + * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING + * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING + * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING + * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING + * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING + * + * Many of the fields in CRB are status bits used by hardware + * for implementation of the protocol. It's very dangerous to + * mess around with the CRB registers. + * + * It's OK to read the CRB registers and try to make sense out of the + * fields in CRB. + * + * Updating CRB requires all activities in Hub IIO to be quiesced. + * otherwise, a write to CRB could corrupt other CRB entries. + * CRBs are here only as a back door peek to shub IIO's status. + * Quiescing implies no dmas no PIOs + * either directly from the cpu or from sn0net. + * this is not something that can be done easily. So, AVOID updating + * CRBs. + */ + +/* + * Easy access macros for CRBs, all 5 registers (A-E) + */ +typedef ii_icrb0_a_u_t icrba_t; +#define a_sidn ii_icrb0_a_fld_s.ia_sidn +#define a_tnum ii_icrb0_a_fld_s.ia_tnum +#define a_addr ii_icrb0_a_fld_s.ia_addr +#define a_valid ii_icrb0_a_fld_s.ia_vld +#define a_iow ii_icrb0_a_fld_s.ia_iow +#define a_regvalue ii_icrb0_a_regval + +typedef ii_icrb0_b_u_t icrbb_t; +#define b_use_old ii_icrb0_b_fld_s.ib_use_old +#define b_imsgtype ii_icrb0_b_fld_s.ib_imsgtype +#define b_imsg ii_icrb0_b_fld_s.ib_imsg +#define b_initiator ii_icrb0_b_fld_s.ib_init +#define b_exc ii_icrb0_b_fld_s.ib_exc +#define b_ackcnt ii_icrb0_b_fld_s.ib_ack_cnt +#define b_resp ii_icrb0_b_fld_s.ib_resp +#define b_ack ii_icrb0_b_fld_s.ib_ack +#define b_hold ii_icrb0_b_fld_s.ib_hold +#define b_wb ii_icrb0_b_fld_s.ib_wb +#define b_intvn ii_icrb0_b_fld_s.ib_intvn +#define b_stall_ib ii_icrb0_b_fld_s.ib_stall_ib +#define b_stall_int ii_icrb0_b_fld_s.ib_stall__intr +#define b_stall_bte_0 ii_icrb0_b_fld_s.ib_stall__bte_0 +#define b_stall_bte_1 ii_icrb0_b_fld_s.ib_stall__bte_1 +#define b_error ii_icrb0_b_fld_s.ib_error +#define b_ecode ii_icrb0_b_fld_s.ib_errcode +#define b_lnetuce ii_icrb0_b_fld_s.ib_ln_uce +#define b_mark ii_icrb0_b_fld_s.ib_mark +#define b_xerr ii_icrb0_b_fld_s.ib_xt_err +#define b_regvalue ii_icrb0_b_regval + +typedef ii_icrb0_c_u_t icrbc_t; +#define c_suppl ii_icrb0_c_fld_s.ic_suppl +#define c_barrop ii_icrb0_c_fld_s.ic_bo +#define c_doresp ii_icrb0_c_fld_s.ic_resprqd +#define c_gbr ii_icrb0_c_fld_s.ic_gbr +#define c_btenum ii_icrb0_c_fld_s.ic_bte_num +#define c_cohtrans ii_icrb0_c_fld_s.ic_ct +#define c_xtsize ii_icrb0_c_fld_s.ic_size +#define c_source ii_icrb0_c_fld_s.ic_source +#define c_regvalue ii_icrb0_c_regval + +typedef ii_icrb0_d_u_t icrbd_t; +#define d_sleep ii_icrb0_d_fld_s.id_sleep +#define d_pricnt ii_icrb0_d_fld_s.id_pr_cnt +#define d_pripsc ii_icrb0_d_fld_s.id_pr_psc +#define d_bteop ii_icrb0_d_fld_s.id_bte_op +#define d_bteaddr ii_icrb0_d_fld_s.id_pa_be /* ic_pa_be fld has 2 names */ +#define d_benable ii_icrb0_d_fld_s.id_pa_be /* ic_pa_be fld has 2 names */ +#define d_regvalue ii_icrb0_d_regval + +typedef ii_icrb0_e_u_t icrbe_t; +#define icrbe_ctxtvld ii_icrb0_e_fld_s.ie_cvld +#define icrbe_toutvld ii_icrb0_e_fld_s.ie_tvld +#define icrbe_context ii_icrb0_e_fld_s.ie_context +#define icrbe_timeout ii_icrb0_e_fld_s.ie_timeout +#define e_regvalue ii_icrb0_e_regval + +/* Number of widgets supported by shub */ +#define HUB_NUM_WIDGET 9 +#define HUB_WIDGET_ID_MIN 0x8 +#define HUB_WIDGET_ID_MAX 0xf + +#define HUB_WIDGET_PART_NUM 0xc120 +#define MAX_HUBS_PER_XBOW 2 + +/* A few more #defines for backwards compatibility */ +#define iprb_t ii_iprb0_u_t +#define iprb_regval ii_iprb0_regval +#define iprb_mult_err ii_iprb0_fld_s.i_mult_err +#define iprb_spur_rd ii_iprb0_fld_s.i_spur_rd +#define iprb_spur_wr ii_iprb0_fld_s.i_spur_wr +#define iprb_rd_to ii_iprb0_fld_s.i_rd_to +#define iprb_ovflow ii_iprb0_fld_s.i_of_cnt +#define iprb_error ii_iprb0_fld_s.i_error +#define iprb_ff ii_iprb0_fld_s.i_f +#define iprb_mode ii_iprb0_fld_s.i_m +#define iprb_bnakctr ii_iprb0_fld_s.i_nb +#define iprb_anakctr ii_iprb0_fld_s.i_na +#define iprb_xtalkctr ii_iprb0_fld_s.i_c + +#define LNK_STAT_WORKING 0x2 /* LLP is working */ + +#define IIO_WSTAT_ECRAZY (1ULL << 32) /* Hub gone crazy */ +#define IIO_WSTAT_TXRETRY (1ULL << 9) /* Hub Tx Retry timeout */ +#define IIO_WSTAT_TXRETRY_MASK 0x7F /* should be 0xFF?? */ +#define IIO_WSTAT_TXRETRY_SHFT 16 +#define IIO_WSTAT_TXRETRY_CNT(w) (((w) >> IIO_WSTAT_TXRETRY_SHFT) & \ + IIO_WSTAT_TXRETRY_MASK) + +/* Number of II perf. counters we can multiplex at once */ + +#define IO_PERF_SETS 32 + +/* Bit for the widget in inbound access register */ +#define IIO_IIWA_WIDGET(_w) ((u64)(1ULL << _w)) +/* Bit for the widget in outbound access register */ +#define IIO_IOWA_WIDGET(_w) ((u64)(1ULL << _w)) + +/* NOTE: The following define assumes that we are going to get + * widget numbers from 8 thru F and the device numbers within + * widget from 0 thru 7. + */ +#define IIO_IIDEM_WIDGETDEV_MASK(w, d) ((u64)(1ULL << (8 * ((w) - 8) + (d)))) + +/* IO Interrupt Destination Register */ +#define IIO_IIDSR_SENT_SHIFT 28 +#define IIO_IIDSR_SENT_MASK 0x30000000 +#define IIO_IIDSR_ENB_SHIFT 24 +#define IIO_IIDSR_ENB_MASK 0x01000000 +#define IIO_IIDSR_NODE_SHIFT 9 +#define IIO_IIDSR_NODE_MASK 0x000ff700 +#define IIO_IIDSR_PI_ID_SHIFT 8 +#define IIO_IIDSR_PI_ID_MASK 0x00000100 +#define IIO_IIDSR_LVL_SHIFT 0 +#define IIO_IIDSR_LVL_MASK 0x000000ff + +/* Xtalk timeout threshhold register (IIO_IXTT) */ +#define IXTT_RRSP_TO_SHFT 55 /* read response timeout */ +#define IXTT_RRSP_TO_MASK (0x1FULL << IXTT_RRSP_TO_SHFT) +#define IXTT_RRSP_PS_SHFT 32 /* read responsed TO prescalar */ +#define IXTT_RRSP_PS_MASK (0x7FFFFFULL << IXTT_RRSP_PS_SHFT) +#define IXTT_TAIL_TO_SHFT 0 /* tail timeout counter threshold */ +#define IXTT_TAIL_TO_MASK (0x3FFFFFFULL << IXTT_TAIL_TO_SHFT) + +/* + * The IO LLP control status register and widget control register + */ + +typedef union hubii_wcr_u { + u64 wcr_reg_value; + struct { + u64 wcr_widget_id:4, /* LLP crossbar credit */ + wcr_tag_mode:1, /* Tag mode */ + wcr_rsvd1:8, /* Reserved */ + wcr_xbar_crd:3, /* LLP crossbar credit */ + wcr_f_bad_pkt:1, /* Force bad llp pkt enable */ + wcr_dir_con:1, /* widget direct connect */ + wcr_e_thresh:5, /* elasticity threshold */ + wcr_rsvd:41; /* unused */ + } wcr_fields_s; +} hubii_wcr_t; + +#define iwcr_dir_con wcr_fields_s.wcr_dir_con + +/* The structures below are defined to extract and modify the ii +performance registers */ + +/* io_perf_sel allows the caller to specify what tests will be + performed */ + +typedef union io_perf_sel { + u64 perf_sel_reg; + struct { + u64 perf_ippr0:4, perf_ippr1:4, perf_icct:8, perf_rsvd:48; + } perf_sel_bits; +} io_perf_sel_t; + +/* io_perf_cnt is to extract the count from the shub registers. Due to + hardware problems there is only one counter, not two. */ + +typedef union io_perf_cnt { + u64 perf_cnt; + struct { + u64 perf_cnt:20, perf_rsvd2:12, perf_rsvd1:32; + } perf_cnt_bits; + +} io_perf_cnt_t; + +typedef union iprte_a { + u64 entry; + struct { + u64 i_rsvd_1:3; + u64 i_addr:38; + u64 i_init:3; + u64 i_source:8; + u64 i_rsvd:2; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } iprte_fields; +} iprte_a_t; + +#endif /* _ASM_IA64_SN_SHUBIO_H */ diff --git a/arch/ia64/include/asm/sn/simulator.h b/arch/ia64/include/asm/sn/simulator.h new file mode 100644 index 00000000000..c2611f6cfe3 --- /dev/null +++ b/arch/ia64/include/asm/sn/simulator.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_SIMULATOR_H +#define _ASM_IA64_SN_SIMULATOR_H + +#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_SGI_UV) +#define SNMAGIC 0xaeeeeeee8badbeefL +#define IS_MEDUSA() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;}) + +#define SIMULATOR_SLEEP() asm("nop.i 0x8beef") +#define IS_RUNNING_ON_SIMULATOR() (sn_prom_type) +#define IS_RUNNING_ON_FAKE_PROM() (sn_prom_type == 2) +extern int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */ +#else +#define IS_MEDUSA() 0 +#define SIMULATOR_SLEEP() +#define IS_RUNNING_ON_SIMULATOR() 0 +#endif + +#endif /* _ASM_IA64_SN_SIMULATOR_H */ diff --git a/arch/ia64/include/asm/sn/sn2/sn_hwperf.h b/arch/ia64/include/asm/sn/sn2/sn_hwperf.h new file mode 100644 index 00000000000..e61ebac38cd --- /dev/null +++ b/arch/ia64/include/asm/sn/sn2/sn_hwperf.h @@ -0,0 +1,242 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved. + * + * Data types used by the SN_SAL_HWPERF_OP SAL call for monitoring + * SGI Altix node and router hardware + * + * Mark Goodwin <markgw@sgi.com> Mon Aug 30 12:23:46 EST 2004 + */ + +#ifndef SN_HWPERF_H +#define SN_HWPERF_H + +/* + * object structure. SN_HWPERF_ENUM_OBJECTS and SN_HWPERF_GET_CPU_INFO + * return an array of these. Do not change this without also + * changing the corresponding SAL code. + */ +#define SN_HWPERF_MAXSTRING 128 +struct sn_hwperf_object_info { + u32 id; + union { + struct { + u64 this_part:1; + u64 is_shared:1; + } fields; + struct { + u64 flags; + u64 reserved; + } b; + } f; + char name[SN_HWPERF_MAXSTRING]; + char location[SN_HWPERF_MAXSTRING]; + u32 ports; +}; + +#define sn_hwp_this_part f.fields.this_part +#define sn_hwp_is_shared f.fields.is_shared +#define sn_hwp_flags f.b.flags + +/* macros for object classification */ +#define SN_HWPERF_IS_NODE(x) ((x) && strstr((x)->name, "SHub")) +#define SN_HWPERF_IS_NODE_SHUB2(x) ((x) && strstr((x)->name, "SHub 2.")) +#define SN_HWPERF_IS_IONODE(x) ((x) && strstr((x)->name, "TIO")) +#define SN_HWPERF_IS_NL3ROUTER(x) ((x) && strstr((x)->name, "NL3Router")) +#define SN_HWPERF_IS_NL4ROUTER(x) ((x) && strstr((x)->name, "NL4Router")) +#define SN_HWPERF_IS_OLDROUTER(x) ((x) && strstr((x)->name, "Router")) +#define SN_HWPERF_IS_ROUTER(x) (SN_HWPERF_IS_NL3ROUTER(x) || \ + SN_HWPERF_IS_NL4ROUTER(x) || \ + SN_HWPERF_IS_OLDROUTER(x)) +#define SN_HWPERF_FOREIGN(x) ((x) && !(x)->sn_hwp_this_part && !(x)->sn_hwp_is_shared) +#define SN_HWPERF_SAME_OBJTYPE(x,y) ((SN_HWPERF_IS_NODE(x) && SN_HWPERF_IS_NODE(y)) ||\ + (SN_HWPERF_IS_IONODE(x) && SN_HWPERF_IS_IONODE(y)) ||\ + (SN_HWPERF_IS_ROUTER(x) && SN_HWPERF_IS_ROUTER(y))) + +/* numa port structure, SN_HWPERF_ENUM_PORTS returns an array of these */ +struct sn_hwperf_port_info { + u32 port; + u32 conn_id; + u32 conn_port; +}; + +/* for HWPERF_{GET,SET}_MMRS */ +struct sn_hwperf_data { + u64 addr; + u64 data; +}; + +/* user ioctl() argument, see below */ +struct sn_hwperf_ioctl_args { + u64 arg; /* argument, usually an object id */ + u64 sz; /* size of transfer */ + void *ptr; /* pointer to source/target */ + u32 v0; /* second return value */ +}; + +/* + * For SN_HWPERF_{GET,SET}_MMRS and SN_HWPERF_OBJECT_DISTANCE, + * sn_hwperf_ioctl_args.arg can be used to specify a CPU on which + * to call SAL, and whether to use an interprocessor interrupt + * or task migration in order to do so. If the CPU specified is + * SN_HWPERF_ARG_ANY_CPU, then the current CPU will be used. + */ +#define SN_HWPERF_ARG_ANY_CPU 0x7fffffffUL +#define SN_HWPERF_ARG_CPU_MASK 0x7fffffff00000000ULL +#define SN_HWPERF_ARG_USE_IPI_MASK 0x8000000000000000ULL +#define SN_HWPERF_ARG_OBJID_MASK 0x00000000ffffffffULL + +/* + * ioctl requests on the "sn_hwperf" misc device that call SAL. + */ +#define SN_HWPERF_OP_MEM_COPYIN 0x1000 +#define SN_HWPERF_OP_MEM_COPYOUT 0x2000 +#define SN_HWPERF_OP_MASK 0x0fff + +/* + * Determine mem requirement. + * arg don't care + * sz 8 + * p pointer to u64 integer + */ +#define SN_HWPERF_GET_HEAPSIZE 1 + +/* + * Install mem for SAL drvr + * arg don't care + * sz sizeof buffer pointed to by p + * p pointer to buffer for scratch area + */ +#define SN_HWPERF_INSTALL_HEAP 2 + +/* + * Determine number of objects + * arg don't care + * sz 8 + * p pointer to u64 integer + */ +#define SN_HWPERF_OBJECT_COUNT (10|SN_HWPERF_OP_MEM_COPYOUT) + +/* + * Determine object "distance", relative to a cpu. This operation can + * execute on a designated logical cpu number, using either an IPI or + * via task migration. If the cpu number is SN_HWPERF_ANY_CPU, then + * the current CPU is used. See the SN_HWPERF_ARG_* macros above. + * + * arg bitmap of IPI flag, cpu number and object id + * sz 8 + * p pointer to u64 integer + */ +#define SN_HWPERF_OBJECT_DISTANCE (11|SN_HWPERF_OP_MEM_COPYOUT) + +/* + * Enumerate objects. Special case if sz == 8, returns the required + * buffer size. + * arg don't care + * sz sizeof buffer pointed to by p + * p pointer to array of struct sn_hwperf_object_info + */ +#define SN_HWPERF_ENUM_OBJECTS (12|SN_HWPERF_OP_MEM_COPYOUT) + +/* + * Enumerate NumaLink ports for an object. Special case if sz == 8, + * returns the required buffer size. + * arg object id + * sz sizeof buffer pointed to by p + * p pointer to array of struct sn_hwperf_port_info + */ +#define SN_HWPERF_ENUM_PORTS (13|SN_HWPERF_OP_MEM_COPYOUT) + +/* + * SET/GET memory mapped registers. These operations can execute + * on a designated logical cpu number, using either an IPI or via + * task migration. If the cpu number is SN_HWPERF_ANY_CPU, then + * the current CPU is used. See the SN_HWPERF_ARG_* macros above. + * + * arg bitmap of ipi flag, cpu number and object id + * sz sizeof buffer pointed to by p + * p pointer to array of struct sn_hwperf_data + */ +#define SN_HWPERF_SET_MMRS (14|SN_HWPERF_OP_MEM_COPYIN) +#define SN_HWPERF_GET_MMRS (15|SN_HWPERF_OP_MEM_COPYOUT| \ + SN_HWPERF_OP_MEM_COPYIN) +/* + * Lock a shared object + * arg object id + * sz don't care + * p don't care + */ +#define SN_HWPERF_ACQUIRE 16 + +/* + * Unlock a shared object + * arg object id + * sz don't care + * p don't care + */ +#define SN_HWPERF_RELEASE 17 + +/* + * Break a lock on a shared object + * arg object id + * sz don't care + * p don't care + */ +#define SN_HWPERF_FORCE_RELEASE 18 + +/* + * ioctl requests on "sn_hwperf" that do not call SAL + */ + +/* + * get cpu info as an array of hwperf_object_info_t. + * id is logical CPU number, name is description, location + * is geoid (e.g. 001c04#1c). Special case if sz == 8, + * returns the required buffer size. + * + * arg don't care + * sz sizeof buffer pointed to by p + * p pointer to array of struct sn_hwperf_object_info + */ +#define SN_HWPERF_GET_CPU_INFO (100|SN_HWPERF_OP_MEM_COPYOUT) + +/* + * Given an object id, return it's node number (aka cnode). + * arg object id + * sz 8 + * p pointer to u64 integer + */ +#define SN_HWPERF_GET_OBJ_NODE (101|SN_HWPERF_OP_MEM_COPYOUT) + +/* + * Given a node number (cnode), return it's nasid. + * arg ordinal node number (aka cnodeid) + * sz 8 + * p pointer to u64 integer + */ +#define SN_HWPERF_GET_NODE_NASID (102|SN_HWPERF_OP_MEM_COPYOUT) + +/* + * Given a node id, determine the id of the nearest node with CPUs + * and the id of the nearest node that has memory. The argument + * node would normally be a "headless" node, e.g. an "IO node". + * Return 0 on success. + */ +extern int sn_hwperf_get_nearest_node(cnodeid_t node, + cnodeid_t *near_mem, cnodeid_t *near_cpu); + +/* return codes */ +#define SN_HWPERF_OP_OK 0 +#define SN_HWPERF_OP_NOMEM 1 +#define SN_HWPERF_OP_NO_PERM 2 +#define SN_HWPERF_OP_IO_ERROR 3 +#define SN_HWPERF_OP_BUSY 4 +#define SN_HWPERF_OP_RECONFIGURE 253 +#define SN_HWPERF_OP_INVAL 254 + +int sn_topology_open(struct inode *inode, struct file *file); +int sn_topology_release(struct inode *inode, struct file *file); +#endif /* SN_HWPERF_H */ diff --git a/arch/ia64/include/asm/sn/sn_cpuid.h b/arch/ia64/include/asm/sn/sn_cpuid.h new file mode 100644 index 00000000000..a676dd9ace3 --- /dev/null +++ b/arch/ia64/include/asm/sn/sn_cpuid.h @@ -0,0 +1,132 @@ +/* + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved. + */ + + +#ifndef _ASM_IA64_SN_SN_CPUID_H +#define _ASM_IA64_SN_SN_CPUID_H + +#include <linux/smp.h> +#include <asm/sn/addrs.h> +#include <asm/sn/pda.h> +#include <asm/intrinsics.h> + + +/* + * Functions for converting between cpuids, nodeids and NASIDs. + * + * These are for SGI platforms only. + * + */ + + + + +/* + * Definitions of terms (these definitions are for IA64 ONLY. Other architectures + * use cpuid/cpunum quite defferently): + * + * CPUID - a number in range of 0..NR_CPUS-1 that uniquely identifies + * the cpu. The value cpuid has no significance on IA64 other than + * the boot cpu is 0. + * smp_processor_id() returns the cpuid of the current cpu. + * + * CPU_PHYSICAL_ID (also known as HARD_PROCESSOR_ID) + * This is the same as 31:24 of the processor LID register + * hard_smp_processor_id()- cpu_physical_id of current processor + * cpu_physical_id(cpuid) - convert a <cpuid> to a <physical_cpuid> + * cpu_logical_id(phy_id) - convert a <physical_cpuid> to a <cpuid> + * * not real efficient - don't use in perf critical code + * + * SLICE - a number in the range of 0 - 3 (typically) that represents the + * cpu number on a brick. + * + * SUBNODE - (almost obsolete) the number of the FSB that a cpu is + * connected to. This is also the same as the PI number. Usually 0 or 1. + * + * NOTE!!!: the value of the bits in the cpu physical id (SAPICid or LID) of a cpu has no + * significance. The SAPIC id (LID) is a 16-bit cookie that has meaning only to the PROM. + * + * + * The macros convert between cpu physical ids & slice/nasid/cnodeid. + * These terms are described below: + * + * + * Brick + * ----- ----- ----- ----- CPU + * | 0 | | 1 | | 0 | | 1 | SLICE + * ----- ----- ----- ----- + * | | | | + * | | | | + * 0 | | 2 0 | | 2 FSB SLOT + * ------- ------- + * | | + * | | + * | | + * ------------ ------------- + * | | | | + * | SHUB | | SHUB | NASID (0..MAX_NASIDS) + * | |----- | | CNODEID (0..num_compact_nodes-1) + * | | | | + * | | | | + * ------------ ------------- + * | | + * + * + */ + +#define get_node_number(addr) NASID_GET(addr) + +/* + * NOTE: on non-MP systems, only cpuid 0 exists + */ + +extern short physical_node_map[]; /* indexed by nasid to get cnode */ + +/* + * Macros for retrieving info about current cpu + */ +#define get_nasid() (sn_nodepda->phys_cpuid[smp_processor_id()].nasid) +#define get_subnode() (sn_nodepda->phys_cpuid[smp_processor_id()].subnode) +#define get_slice() (sn_nodepda->phys_cpuid[smp_processor_id()].slice) +#define get_cnode() (sn_nodepda->phys_cpuid[smp_processor_id()].cnode) +#define get_sapicid() ((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff) + +/* + * Macros for retrieving info about an arbitrary cpu + * cpuid - logical cpu id + */ +#define cpuid_to_nasid(cpuid) (sn_nodepda->phys_cpuid[cpuid].nasid) +#define cpuid_to_subnode(cpuid) (sn_nodepda->phys_cpuid[cpuid].subnode) +#define cpuid_to_slice(cpuid) (sn_nodepda->phys_cpuid[cpuid].slice) + + +/* + * Dont use the following in performance critical code. They require scans + * of potentially large tables. + */ +extern int nasid_slice_to_cpuid(int, int); + +/* + * cnodeid_to_nasid - convert a cnodeid to a NASID + */ +#define cnodeid_to_nasid(cnodeid) (sn_cnodeid_to_nasid[cnodeid]) + +/* + * nasid_to_cnodeid - convert a NASID to a cnodeid + */ +#define nasid_to_cnodeid(nasid) (physical_node_map[nasid]) + +/* + * partition_coherence_id - get the coherence ID of the current partition + */ +extern u8 sn_coherency_id; +#define partition_coherence_id() (sn_coherency_id) + +#endif /* _ASM_IA64_SN_SN_CPUID_H */ + diff --git a/arch/ia64/include/asm/sn/sn_feature_sets.h b/arch/ia64/include/asm/sn/sn_feature_sets.h new file mode 100644 index 00000000000..8e83ac117ac --- /dev/null +++ b/arch/ia64/include/asm/sn/sn_feature_sets.h @@ -0,0 +1,58 @@ +#ifndef _ASM_IA64_SN_FEATURE_SETS_H +#define _ASM_IA64_SN_FEATURE_SETS_H + +/* + * SN PROM Features + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2005-2006 Silicon Graphics, Inc. All rights reserved. + */ + + +/* --------------------- PROM Features -----------------------------*/ +extern int sn_prom_feature_available(int id); + +#define MAX_PROM_FEATURE_SETS 2 + +/* + * The following defines features that may or may not be supported by the + * current PROM. The OS uses sn_prom_feature_available(feature) to test for + * the presence of a PROM feature. Down rev (old) PROMs will always test + * "false" for new features. + * + * Use: + * if (sn_prom_feature_available(PRF_XXX)) + * ... + */ + +#define PRF_PAL_CACHE_FLUSH_SAFE 0 +#define PRF_DEVICE_FLUSH_LIST 1 +#define PRF_HOTPLUG_SUPPORT 2 +#define PRF_CPU_DISABLE_SUPPORT 3 + +/* --------------------- OS Features -------------------------------*/ + +/* + * The following defines OS features that are optionally present in + * the operating system. + * During boot, PROM is notified of these features via a series of calls: + * + * ia64_sn_set_os_feature(feature1); + * + * Once enabled, a feature cannot be disabled. + * + * By default, features are disabled unless explicitly enabled. + * + * These defines must be kept in sync with the corresponding + * PROM definitions in feature_sets.h. + */ +#define OSF_MCA_SLV_TO_OS_INIT_SLV 0 +#define OSF_FEAT_LOG_SBES 1 +#define OSF_ACPI_ENABLE 2 +#define OSF_PCISEGMENT_ENABLE 3 + + +#endif /* _ASM_IA64_SN_FEATURE_SETS_H */ diff --git a/arch/ia64/include/asm/sn/sn_sal.h b/arch/ia64/include/asm/sn/sn_sal.h new file mode 100644 index 00000000000..57e649d388b --- /dev/null +++ b/arch/ia64/include/asm/sn/sn_sal.h @@ -0,0 +1,1188 @@ +#ifndef _ASM_IA64_SN_SN_SAL_H +#define _ASM_IA64_SN_SN_SAL_H + +/* + * System Abstraction Layer definitions for IA64 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2000-2006 Silicon Graphics, Inc. All rights reserved. + */ + + +#include <asm/sal.h> +#include <asm/sn/sn_cpuid.h> +#include <asm/sn/arch.h> +#include <asm/sn/geo.h> +#include <asm/sn/nodepda.h> +#include <asm/sn/shub_mmr.h> + +// SGI Specific Calls +#define SN_SAL_POD_MODE 0x02000001 +#define SN_SAL_SYSTEM_RESET 0x02000002 +#define SN_SAL_PROBE 0x02000003 +#define SN_SAL_GET_MASTER_NASID 0x02000004 +#define SN_SAL_GET_KLCONFIG_ADDR 0x02000005 +#define SN_SAL_LOG_CE 0x02000006 +#define SN_SAL_REGISTER_CE 0x02000007 +#define SN_SAL_GET_PARTITION_ADDR 0x02000009 +#define SN_SAL_XP_ADDR_REGION 0x0200000f +#define SN_SAL_NO_FAULT_ZONE_VIRTUAL 0x02000010 +#define SN_SAL_NO_FAULT_ZONE_PHYSICAL 0x02000011 +#define SN_SAL_PRINT_ERROR 0x02000012 +#define SN_SAL_REGISTER_PMI_HANDLER 0x02000014 +#define SN_SAL_SET_ERROR_HANDLING_FEATURES 0x0200001a // reentrant +#define SN_SAL_GET_FIT_COMPT 0x0200001b // reentrant +#define SN_SAL_GET_SAPIC_INFO 0x0200001d +#define SN_SAL_GET_SN_INFO 0x0200001e +#define SN_SAL_CONSOLE_PUTC 0x02000021 +#define SN_SAL_CONSOLE_GETC 0x02000022 +#define SN_SAL_CONSOLE_PUTS 0x02000023 +#define SN_SAL_CONSOLE_GETS 0x02000024 +#define SN_SAL_CONSOLE_GETS_TIMEOUT 0x02000025 +#define SN_SAL_CONSOLE_POLL 0x02000026 +#define SN_SAL_CONSOLE_INTR 0x02000027 +#define SN_SAL_CONSOLE_PUTB 0x02000028 +#define SN_SAL_CONSOLE_XMIT_CHARS 0x0200002a +#define SN_SAL_CONSOLE_READC 0x0200002b +#define SN_SAL_SYSCTL_OP 0x02000030 +#define SN_SAL_SYSCTL_MODID_GET 0x02000031 +#define SN_SAL_SYSCTL_GET 0x02000032 +#define SN_SAL_SYSCTL_IOBRICK_MODULE_GET 0x02000033 +#define SN_SAL_SYSCTL_IO_PORTSPEED_GET 0x02000035 +#define SN_SAL_SYSCTL_SLAB_GET 0x02000036 +#define SN_SAL_BUS_CONFIG 0x02000037 +#define SN_SAL_SYS_SERIAL_GET 0x02000038 +#define SN_SAL_PARTITION_SERIAL_GET 0x02000039 +#define SN_SAL_SYSCTL_PARTITION_GET 0x0200003a +#define SN_SAL_SYSTEM_POWER_DOWN 0x0200003b +#define SN_SAL_GET_MASTER_BASEIO_NASID 0x0200003c +#define SN_SAL_COHERENCE 0x0200003d +#define SN_SAL_MEMPROTECT 0x0200003e +#define SN_SAL_SYSCTL_FRU_CAPTURE 0x0200003f + +#define SN_SAL_SYSCTL_IOBRICK_PCI_OP 0x02000042 // reentrant +#define SN_SAL_IROUTER_OP 0x02000043 +#define SN_SAL_SYSCTL_EVENT 0x02000044 +#define SN_SAL_IOIF_INTERRUPT 0x0200004a +#define SN_SAL_HWPERF_OP 0x02000050 // lock +#define SN_SAL_IOIF_ERROR_INTERRUPT 0x02000051 +#define SN_SAL_IOIF_PCI_SAFE 0x02000052 +#define SN_SAL_IOIF_SLOT_ENABLE 0x02000053 +#define SN_SAL_IOIF_SLOT_DISABLE 0x02000054 +#define SN_SAL_IOIF_GET_HUBDEV_INFO 0x02000055 +#define SN_SAL_IOIF_GET_PCIBUS_INFO 0x02000056 +#define SN_SAL_IOIF_GET_PCIDEV_INFO 0x02000057 +#define SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST 0x02000058 // deprecated +#define SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST 0x0200005a + +#define SN_SAL_IOIF_INIT 0x0200005f +#define SN_SAL_HUB_ERROR_INTERRUPT 0x02000060 +#define SN_SAL_BTE_RECOVER 0x02000061 +#define SN_SAL_RESERVED_DO_NOT_USE 0x02000062 +#define SN_SAL_IOIF_GET_PCI_TOPOLOGY 0x02000064 + +#define SN_SAL_GET_PROM_FEATURE_SET 0x02000065 +#define SN_SAL_SET_OS_FEATURE_SET 0x02000066 +#define SN_SAL_INJECT_ERROR 0x02000067 +#define SN_SAL_SET_CPU_NUMBER 0x02000068 + +#define SN_SAL_KERNEL_LAUNCH_EVENT 0x02000069 + +/* + * Service-specific constants + */ + +/* Console interrupt manipulation */ + /* action codes */ +#define SAL_CONSOLE_INTR_OFF 0 /* turn the interrupt off */ +#define SAL_CONSOLE_INTR_ON 1 /* turn the interrupt on */ +#define SAL_CONSOLE_INTR_STATUS 2 /* retrieve the interrupt status */ + /* interrupt specification & status return codes */ +#define SAL_CONSOLE_INTR_XMIT 1 /* output interrupt */ +#define SAL_CONSOLE_INTR_RECV 2 /* input interrupt */ + +/* interrupt handling */ +#define SAL_INTR_ALLOC 1 +#define SAL_INTR_FREE 2 +#define SAL_INTR_REDIRECT 3 + +/* + * operations available on the generic SN_SAL_SYSCTL_OP + * runtime service + */ +#define SAL_SYSCTL_OP_IOBOARD 0x0001 /* retrieve board type */ +#define SAL_SYSCTL_OP_TIO_JLCK_RST 0x0002 /* issue TIO clock reset */ + +/* + * IRouter (i.e. generalized system controller) operations + */ +#define SAL_IROUTER_OPEN 0 /* open a subchannel */ +#define SAL_IROUTER_CLOSE 1 /* close a subchannel */ +#define SAL_IROUTER_SEND 2 /* send part of an IRouter packet */ +#define SAL_IROUTER_RECV 3 /* receive part of an IRouter packet */ +#define SAL_IROUTER_INTR_STATUS 4 /* check the interrupt status for + * an open subchannel + */ +#define SAL_IROUTER_INTR_ON 5 /* enable an interrupt */ +#define SAL_IROUTER_INTR_OFF 6 /* disable an interrupt */ +#define SAL_IROUTER_INIT 7 /* initialize IRouter driver */ + +/* IRouter interrupt mask bits */ +#define SAL_IROUTER_INTR_XMIT SAL_CONSOLE_INTR_XMIT +#define SAL_IROUTER_INTR_RECV SAL_CONSOLE_INTR_RECV + +/* + * Error Handling Features + */ +#define SAL_ERR_FEAT_MCA_SLV_TO_OS_INIT_SLV 0x1 // obsolete +#define SAL_ERR_FEAT_LOG_SBES 0x2 // obsolete +#define SAL_ERR_FEAT_MFR_OVERRIDE 0x4 +#define SAL_ERR_FEAT_SBE_THRESHOLD 0xffff0000 + +/* + * SAL Error Codes + */ +#define SALRET_MORE_PASSES 1 +#define SALRET_OK 0 +#define SALRET_NOT_IMPLEMENTED (-1) +#define SALRET_INVALID_ARG (-2) +#define SALRET_ERROR (-3) + +#define SN_SAL_FAKE_PROM 0x02009999 + +/** + * sn_sal_revision - get the SGI SAL revision number + * + * The SGI PROM stores its version in the sal_[ab]_rev_(major|minor). + * This routine simply extracts the major and minor values and + * presents them in a u32 format. + * + * For example, version 4.05 would be represented at 0x0405. + */ +static inline u32 +sn_sal_rev(void) +{ + struct ia64_sal_systab *systab = __va(efi.sal_systab); + + return (u32)(systab->sal_b_rev_major << 8 | systab->sal_b_rev_minor); +} + +/* + * Returns the master console nasid, if the call fails, return an illegal + * value. + */ +static inline u64 +ia64_sn_get_console_nasid(void) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_NASID, 0, 0, 0, 0, 0, 0, 0); + + if (ret_stuff.status < 0) + return ret_stuff.status; + + /* Master console nasid is in 'v0' */ + return ret_stuff.v0; +} + +/* + * Returns the master baseio nasid, if the call fails, return an illegal + * value. + */ +static inline u64 +ia64_sn_get_master_baseio_nasid(void) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_BASEIO_NASID, 0, 0, 0, 0, 0, 0, 0); + + if (ret_stuff.status < 0) + return ret_stuff.status; + + /* Master baseio nasid is in 'v0' */ + return ret_stuff.v0; +} + +static inline void * +ia64_sn_get_klconfig_addr(nasid_t nasid) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0); + return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL; +} + +/* + * Returns the next console character. + */ +static inline u64 +ia64_sn_console_getc(int *ch) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_GETC, 0, 0, 0, 0, 0, 0, 0); + + /* character is in 'v0' */ + *ch = (int)ret_stuff.v0; + + return ret_stuff.status; +} + +/* + * Read a character from the SAL console device, after a previous interrupt + * or poll operation has given us to know that a character is available + * to be read. + */ +static inline u64 +ia64_sn_console_readc(void) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_READC, 0, 0, 0, 0, 0, 0, 0); + + /* character is in 'v0' */ + return ret_stuff.v0; +} + +/* + * Sends the given character to the console. + */ +static inline u64 +ia64_sn_console_putc(char ch) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTC, (u64)ch, 0, 0, 0, 0, 0, 0); + + return ret_stuff.status; +} + +/* + * Sends the given buffer to the console. + */ +static inline u64 +ia64_sn_console_putb(const char *buf, int len) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTB, (u64)buf, (u64)len, 0, 0, 0, 0, 0); + + if ( ret_stuff.status == 0 ) { + return ret_stuff.v0; + } + return (u64)0; +} + +/* + * Print a platform error record + */ +static inline u64 +ia64_sn_plat_specific_err_print(int (*hook)(const char*, ...), char *rec) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_REENTRANT(ret_stuff, SN_SAL_PRINT_ERROR, (u64)hook, (u64)rec, 0, 0, 0, 0, 0); + + return ret_stuff.status; +} + +/* + * Check for Platform errors + */ +static inline u64 +ia64_sn_plat_cpei_handler(void) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_LOG_CE, 0, 0, 0, 0, 0, 0, 0); + + return ret_stuff.status; +} + +/* + * Set Error Handling Features (Obsolete) + */ +static inline u64 +ia64_sn_plat_set_error_handling_features(void) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_REENTRANT(ret_stuff, SN_SAL_SET_ERROR_HANDLING_FEATURES, + SAL_ERR_FEAT_LOG_SBES, + 0, 0, 0, 0, 0, 0); + + return ret_stuff.status; +} + +/* + * Checks for console input. + */ +static inline u64 +ia64_sn_console_check(int *result) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_POLL, 0, 0, 0, 0, 0, 0, 0); + + /* result is in 'v0' */ + *result = (int)ret_stuff.v0; + + return ret_stuff.status; +} + +/* + * Checks console interrupt status + */ +static inline u64 +ia64_sn_console_intr_status(void) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, + 0, SAL_CONSOLE_INTR_STATUS, + 0, 0, 0, 0, 0); + + if (ret_stuff.status == 0) { + return ret_stuff.v0; + } + + return 0; +} + +/* + * Enable an interrupt on the SAL console device. + */ +static inline void +ia64_sn_console_intr_enable(u64 intr) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, + intr, SAL_CONSOLE_INTR_ON, + 0, 0, 0, 0, 0); +} + +/* + * Disable an interrupt on the SAL console device. + */ +static inline void +ia64_sn_console_intr_disable(u64 intr) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, + intr, SAL_CONSOLE_INTR_OFF, + 0, 0, 0, 0, 0); +} + +/* + * Sends a character buffer to the console asynchronously. + */ +static inline u64 +ia64_sn_console_xmit_chars(char *buf, int len) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_XMIT_CHARS, + (u64)buf, (u64)len, + 0, 0, 0, 0, 0); + + if (ret_stuff.status == 0) { + return ret_stuff.v0; + } + + return 0; +} + +/* + * Returns the iobrick module Id + */ +static inline u64 +ia64_sn_sysctl_iobrick_module_get(nasid_t nasid, int *result) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYSCTL_IOBRICK_MODULE_GET, nasid, 0, 0, 0, 0, 0, 0); + + /* result is in 'v0' */ + *result = (int)ret_stuff.v0; + + return ret_stuff.status; +} + +/** + * ia64_sn_pod_mode - call the SN_SAL_POD_MODE function + * + * SN_SAL_POD_MODE actually takes an argument, but it's always + * 0 when we call it from the kernel, so we don't have to expose + * it to the caller. + */ +static inline u64 +ia64_sn_pod_mode(void) +{ + struct ia64_sal_retval isrv; + SAL_CALL_REENTRANT(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0); + if (isrv.status) + return 0; + return isrv.v0; +} + +/** + * ia64_sn_probe_mem - read from memory safely + * @addr: address to probe + * @size: number bytes to read (1,2,4,8) + * @data_ptr: address to store value read by probe (-1 returned if probe fails) + * + * Call into the SAL to do a memory read. If the read generates a machine + * check, this routine will recover gracefully and return -1 to the caller. + * @addr is usually a kernel virtual address in uncached space (i.e. the + * address starts with 0xc), but if called in physical mode, @addr should + * be a physical address. + * + * Return values: + * 0 - probe successful + * 1 - probe failed (generated MCA) + * 2 - Bad arg + * <0 - PAL error + */ +static inline u64 +ia64_sn_probe_mem(long addr, long size, void *data_ptr) +{ + struct ia64_sal_retval isrv; + + SAL_CALL(isrv, SN_SAL_PROBE, addr, size, 0, 0, 0, 0, 0); + + if (data_ptr) { + switch (size) { + case 1: + *((u8*)data_ptr) = (u8)isrv.v0; + break; + case 2: + *((u16*)data_ptr) = (u16)isrv.v0; + break; + case 4: + *((u32*)data_ptr) = (u32)isrv.v0; + break; + case 8: + *((u64*)data_ptr) = (u64)isrv.v0; + break; + default: + isrv.status = 2; + } + } + return isrv.status; +} + +/* + * Retrieve the system serial number as an ASCII string. + */ +static inline u64 +ia64_sn_sys_serial_get(char *buf) +{ + struct ia64_sal_retval ret_stuff; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYS_SERIAL_GET, buf, 0, 0, 0, 0, 0, 0); + return ret_stuff.status; +} + +extern char sn_system_serial_number_string[]; +extern u64 sn_partition_serial_number; + +static inline char * +sn_system_serial_number(void) { + if (sn_system_serial_number_string[0]) { + return(sn_system_serial_number_string); + } else { + ia64_sn_sys_serial_get(sn_system_serial_number_string); + return(sn_system_serial_number_string); + } +} + + +/* + * Returns a unique id number for this system and partition (suitable for + * use with license managers), based in part on the system serial number. + */ +static inline u64 +ia64_sn_partition_serial_get(void) +{ + struct ia64_sal_retval ret_stuff; + ia64_sal_oemcall_reentrant(&ret_stuff, SN_SAL_PARTITION_SERIAL_GET, 0, + 0, 0, 0, 0, 0, 0); + if (ret_stuff.status != 0) + return 0; + return ret_stuff.v0; +} + +static inline u64 +sn_partition_serial_number_val(void) { + if (unlikely(sn_partition_serial_number == 0)) { + sn_partition_serial_number = ia64_sn_partition_serial_get(); + } + return sn_partition_serial_number; +} + +/* + * Returns the partition id of the nasid passed in as an argument, + * or INVALID_PARTID if the partition id cannot be retrieved. + */ +static inline partid_t +ia64_sn_sysctl_partition_get(nasid_t nasid) +{ + struct ia64_sal_retval ret_stuff; + SAL_CALL(ret_stuff, SN_SAL_SYSCTL_PARTITION_GET, nasid, + 0, 0, 0, 0, 0, 0); + if (ret_stuff.status != 0) + return -1; + return ((partid_t)ret_stuff.v0); +} + +/* + * Returns the physical address of the partition's reserved page through + * an iterative number of calls. + * + * On first call, 'cookie' and 'len' should be set to 0, and 'addr' + * set to the nasid of the partition whose reserved page's address is + * being sought. + * On subsequent calls, pass the values, that were passed back on the + * previous call. + * + * While the return status equals SALRET_MORE_PASSES, keep calling + * this function after first copying 'len' bytes starting at 'addr' + * into 'buf'. Once the return status equals SALRET_OK, 'addr' will + * be the physical address of the partition's reserved page. If the + * return status equals neither of these, an error as occurred. + */ +static inline s64 +sn_partition_reserved_page_pa(u64 buf, u64 *cookie, u64 *addr, u64 *len) +{ + struct ia64_sal_retval rv; + ia64_sal_oemcall_reentrant(&rv, SN_SAL_GET_PARTITION_ADDR, *cookie, + *addr, buf, *len, 0, 0, 0); + *cookie = rv.v0; + *addr = rv.v1; + *len = rv.v2; + return rv.status; +} + +/* + * Register or unregister a physical address range being referenced across + * a partition boundary for which certain SAL errors should be scanned for, + * cleaned up and ignored. This is of value for kernel partitioning code only. + * Values for the operation argument: + * 1 = register this address range with SAL + * 0 = unregister this address range with SAL + * + * SAL maintains a reference count on an address range in case it is registered + * multiple times. + * + * On success, returns the reference count of the address range after the SAL + * call has performed the current registration/unregistration. Returns a + * negative value if an error occurred. + */ +static inline int +sn_register_xp_addr_region(u64 paddr, u64 len, int operation) +{ + struct ia64_sal_retval ret_stuff; + ia64_sal_oemcall(&ret_stuff, SN_SAL_XP_ADDR_REGION, paddr, len, + (u64)operation, 0, 0, 0, 0); + return ret_stuff.status; +} + +/* + * Register or unregister an instruction range for which SAL errors should + * be ignored. If an error occurs while in the registered range, SAL jumps + * to return_addr after ignoring the error. Values for the operation argument: + * 1 = register this instruction range with SAL + * 0 = unregister this instruction range with SAL + * + * Returns 0 on success, or a negative value if an error occurred. + */ +static inline int +sn_register_nofault_code(u64 start_addr, u64 end_addr, u64 return_addr, + int virtual, int operation) +{ + struct ia64_sal_retval ret_stuff; + u64 call; + if (virtual) { + call = SN_SAL_NO_FAULT_ZONE_VIRTUAL; + } else { + call = SN_SAL_NO_FAULT_ZONE_PHYSICAL; + } + ia64_sal_oemcall(&ret_stuff, call, start_addr, end_addr, return_addr, + (u64)1, 0, 0, 0); + return ret_stuff.status; +} + +/* + * Register or unregister a function to handle a PMI received by a CPU. + * Before calling the registered handler, SAL sets r1 to the value that + * was passed in as the global_pointer. + * + * If the handler pointer is NULL, then the currently registered handler + * will be unregistered. + * + * Returns 0 on success, or a negative value if an error occurred. + */ +static inline int +sn_register_pmi_handler(u64 handler, u64 global_pointer) +{ + struct ia64_sal_retval ret_stuff; + ia64_sal_oemcall(&ret_stuff, SN_SAL_REGISTER_PMI_HANDLER, handler, + global_pointer, 0, 0, 0, 0, 0); + return ret_stuff.status; +} + +/* + * Change or query the coherence domain for this partition. Each cpu-based + * nasid is represented by a bit in an array of 64-bit words: + * 0 = not in this partition's coherency domain + * 1 = in this partition's coherency domain + * + * It is not possible for the local system's nasids to be removed from + * the coherency domain. Purpose of the domain arguments: + * new_domain = set the coherence domain to the given nasids + * old_domain = return the current coherence domain + * + * Returns 0 on success, or a negative value if an error occurred. + */ +static inline int +sn_change_coherence(u64 *new_domain, u64 *old_domain) +{ + struct ia64_sal_retval ret_stuff; + ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_COHERENCE, (u64)new_domain, + (u64)old_domain, 0, 0, 0, 0, 0); + return ret_stuff.status; +} + +/* + * Change memory access protections for a physical address range. + * nasid_array is not used on Altix, but may be in future architectures. + * Available memory protection access classes are defined after the function. + */ +static inline int +sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array) +{ + struct ia64_sal_retval ret_stuff; + + ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_MEMPROTECT, paddr, len, + (u64)nasid_array, perms, 0, 0, 0); + return ret_stuff.status; +} +#define SN_MEMPROT_ACCESS_CLASS_0 0x14a080 +#define SN_MEMPROT_ACCESS_CLASS_1 0x2520c2 +#define SN_MEMPROT_ACCESS_CLASS_2 0x14a1ca +#define SN_MEMPROT_ACCESS_CLASS_3 0x14a290 +#define SN_MEMPROT_ACCESS_CLASS_6 0x084080 +#define SN_MEMPROT_ACCESS_CLASS_7 0x021080 + +/* + * Turns off system power. + */ +static inline void +ia64_sn_power_down(void) +{ + struct ia64_sal_retval ret_stuff; + SAL_CALL(ret_stuff, SN_SAL_SYSTEM_POWER_DOWN, 0, 0, 0, 0, 0, 0, 0); + while(1) + cpu_relax(); + /* never returns */ +} + +/** + * ia64_sn_fru_capture - tell the system controller to capture hw state + * + * This routine will call the SAL which will tell the system controller(s) + * to capture hw mmr information from each SHub in the system. + */ +static inline u64 +ia64_sn_fru_capture(void) +{ + struct ia64_sal_retval isrv; + SAL_CALL(isrv, SN_SAL_SYSCTL_FRU_CAPTURE, 0, 0, 0, 0, 0, 0, 0); + if (isrv.status) + return 0; + return isrv.v0; +} + +/* + * Performs an operation on a PCI bus or slot -- power up, power down + * or reset. + */ +static inline u64 +ia64_sn_sysctl_iobrick_pci_op(nasid_t n, u64 connection_type, + u64 bus, char slot, + u64 action) +{ + struct ia64_sal_retval rv = {0, 0, 0, 0}; + + SAL_CALL_NOLOCK(rv, SN_SAL_SYSCTL_IOBRICK_PCI_OP, connection_type, n, action, + bus, (u64) slot, 0, 0); + if (rv.status) + return rv.v0; + return 0; +} + + +/* + * Open a subchannel for sending arbitrary data to the system + * controller network via the system controller device associated with + * 'nasid'. Return the subchannel number or a negative error code. + */ +static inline int +ia64_sn_irtr_open(nasid_t nasid) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_OPEN, nasid, + 0, 0, 0, 0, 0); + return (int) rv.v0; +} + +/* + * Close system controller subchannel 'subch' previously opened on 'nasid'. + */ +static inline int +ia64_sn_irtr_close(nasid_t nasid, int subch) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_CLOSE, + (u64) nasid, (u64) subch, 0, 0, 0, 0); + return (int) rv.status; +} + +/* + * Read data from system controller associated with 'nasid' on + * subchannel 'subch'. The buffer to be filled is pointed to by + * 'buf', and its capacity is in the integer pointed to by 'len'. The + * referent of 'len' is set to the number of bytes read by the SAL + * call. The return value is either SALRET_OK (for bytes read) or + * SALRET_ERROR (for error or "no data available"). + */ +static inline int +ia64_sn_irtr_recv(nasid_t nasid, int subch, char *buf, int *len) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_RECV, + (u64) nasid, (u64) subch, (u64) buf, (u64) len, + 0, 0); + return (int) rv.status; +} + +/* + * Write data to the system controller network via the system + * controller associated with 'nasid' on suchannel 'subch'. The + * buffer to be written out is pointed to by 'buf', and 'len' is the + * number of bytes to be written. The return value is either the + * number of bytes written (which could be zero) or a negative error + * code. + */ +static inline int +ia64_sn_irtr_send(nasid_t nasid, int subch, char *buf, int len) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_SEND, + (u64) nasid, (u64) subch, (u64) buf, (u64) len, + 0, 0); + return (int) rv.v0; +} + +/* + * Check whether any interrupts are pending for the system controller + * associated with 'nasid' and its subchannel 'subch'. The return + * value is a mask of pending interrupts (SAL_IROUTER_INTR_XMIT and/or + * SAL_IROUTER_INTR_RECV). + */ +static inline int +ia64_sn_irtr_intr(nasid_t nasid, int subch) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_STATUS, + (u64) nasid, (u64) subch, 0, 0, 0, 0); + return (int) rv.v0; +} + +/* + * Enable the interrupt indicated by the intr parameter (either + * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV). + */ +static inline int +ia64_sn_irtr_intr_enable(nasid_t nasid, int subch, u64 intr) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_ON, + (u64) nasid, (u64) subch, intr, 0, 0, 0); + return (int) rv.v0; +} + +/* + * Disable the interrupt indicated by the intr parameter (either + * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV). + */ +static inline int +ia64_sn_irtr_intr_disable(nasid_t nasid, int subch, u64 intr) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_OFF, + (u64) nasid, (u64) subch, intr, 0, 0, 0); + return (int) rv.v0; +} + +/* + * Set up a node as the point of contact for system controller + * environmental event delivery. + */ +static inline int +ia64_sn_sysctl_event_init(nasid_t nasid) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_EVENT, (u64) nasid, + 0, 0, 0, 0, 0, 0); + return (int) rv.v0; +} + +/* + * Ask the system controller on the specified nasid to reset + * the CX corelet clock. Only valid on TIO nodes. + */ +static inline int +ia64_sn_sysctl_tio_clock_reset(nasid_t nasid) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_TIO_JLCK_RST, + nasid, 0, 0, 0, 0, 0); + if (rv.status != 0) + return (int)rv.status; + if (rv.v0 != 0) + return (int)rv.v0; + + return 0; +} + +/* + * Get the associated ioboard type for a given nasid. + */ +static inline s64 +ia64_sn_sysctl_ioboard_get(nasid_t nasid, u16 *ioboard) +{ + struct ia64_sal_retval isrv; + SAL_CALL_REENTRANT(isrv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_IOBOARD, + nasid, 0, 0, 0, 0, 0); + if (isrv.v0 != 0) { + *ioboard = isrv.v0; + return isrv.status; + } + if (isrv.v1 != 0) { + *ioboard = isrv.v1; + return isrv.status; + } + + return isrv.status; +} + +/** + * ia64_sn_get_fit_compt - read a FIT entry from the PROM header + * @nasid: NASID of node to read + * @index: FIT entry index to be retrieved (0..n) + * @fitentry: 16 byte buffer where FIT entry will be stored. + * @banbuf: optional buffer for retrieving banner + * @banlen: length of banner buffer + * + * Access to the physical PROM chips needs to be serialized since reads and + * writes can't occur at the same time, so we need to call into the SAL when + * we want to look at the FIT entries on the chips. + * + * Returns: + * %SALRET_OK if ok + * %SALRET_INVALID_ARG if index too big + * %SALRET_NOT_IMPLEMENTED if running on older PROM + * ??? if nasid invalid OR banner buffer not large enough + */ +static inline int +ia64_sn_get_fit_compt(u64 nasid, u64 index, void *fitentry, void *banbuf, + u64 banlen) +{ + struct ia64_sal_retval rv; + SAL_CALL_NOLOCK(rv, SN_SAL_GET_FIT_COMPT, nasid, index, fitentry, + banbuf, banlen, 0, 0); + return (int) rv.status; +} + +/* + * Initialize the SAL components of the system controller + * communication driver; specifically pass in a sizable buffer that + * can be used for allocation of subchannel queues as new subchannels + * are opened. "buf" points to the buffer, and "len" specifies its + * length. + */ +static inline int +ia64_sn_irtr_init(nasid_t nasid, void *buf, int len) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INIT, + (u64) nasid, (u64) buf, (u64) len, 0, 0, 0); + return (int) rv.status; +} + +/* + * Returns the nasid, subnode & slice corresponding to a SAPIC ID + * + * In: + * arg0 - SN_SAL_GET_SAPIC_INFO + * arg1 - sapicid (lid >> 16) + * Out: + * v0 - nasid + * v1 - subnode + * v2 - slice + */ +static inline u64 +ia64_sn_get_sapic_info(int sapicid, int *nasid, int *subnode, int *slice) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SAPIC_INFO, sapicid, 0, 0, 0, 0, 0, 0); + +/***** BEGIN HACK - temp til old proms no longer supported ********/ + if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) { + if (nasid) *nasid = sapicid & 0xfff; + if (subnode) *subnode = (sapicid >> 13) & 1; + if (slice) *slice = (sapicid >> 12) & 3; + return 0; + } +/***** END HACK *******/ + + if (ret_stuff.status < 0) + return ret_stuff.status; + + if (nasid) *nasid = (int) ret_stuff.v0; + if (subnode) *subnode = (int) ret_stuff.v1; + if (slice) *slice = (int) ret_stuff.v2; + return 0; +} + +/* + * Returns information about the HUB/SHUB. + * In: + * arg0 - SN_SAL_GET_SN_INFO + * arg1 - 0 (other values reserved for future use) + * Out: + * v0 + * [7:0] - shub type (0=shub1, 1=shub2) + * [15:8] - Log2 max number of nodes in entire system (includes + * C-bricks, I-bricks, etc) + * [23:16] - Log2 of nodes per sharing domain + * [31:24] - partition ID + * [39:32] - coherency_id + * [47:40] - regionsize + * v1 + * [15:0] - nasid mask (ex., 0x7ff for 11 bit nasid) + * [23:15] - bit position of low nasid bit + */ +static inline u64 +ia64_sn_get_sn_info(int fc, u8 *shubtype, u16 *nasid_bitmask, u8 *nasid_shift, + u8 *systemsize, u8 *sharing_domain_size, u8 *partid, u8 *coher, u8 *reg) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SN_INFO, fc, 0, 0, 0, 0, 0, 0); + +/***** BEGIN HACK - temp til old proms no longer supported ********/ + if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) { + int nasid = get_sapicid() & 0xfff; +#define SH_SHUB_ID_NODES_PER_BIT_MASK 0x001f000000000000UL +#define SH_SHUB_ID_NODES_PER_BIT_SHFT 48 + if (shubtype) *shubtype = 0; + if (nasid_bitmask) *nasid_bitmask = 0x7ff; + if (nasid_shift) *nasid_shift = 38; + if (systemsize) *systemsize = 10; + if (sharing_domain_size) *sharing_domain_size = 8; + if (partid) *partid = ia64_sn_sysctl_partition_get(nasid); + if (coher) *coher = nasid >> 9; + if (reg) *reg = (HUB_L((u64 *) LOCAL_MMR_ADDR(SH1_SHUB_ID)) & SH_SHUB_ID_NODES_PER_BIT_MASK) >> + SH_SHUB_ID_NODES_PER_BIT_SHFT; + return 0; + } +/***** END HACK *******/ + + if (ret_stuff.status < 0) + return ret_stuff.status; + + if (shubtype) *shubtype = ret_stuff.v0 & 0xff; + if (systemsize) *systemsize = (ret_stuff.v0 >> 8) & 0xff; + if (sharing_domain_size) *sharing_domain_size = (ret_stuff.v0 >> 16) & 0xff; + if (partid) *partid = (ret_stuff.v0 >> 24) & 0xff; + if (coher) *coher = (ret_stuff.v0 >> 32) & 0xff; + if (reg) *reg = (ret_stuff.v0 >> 40) & 0xff; + if (nasid_bitmask) *nasid_bitmask = (ret_stuff.v1 & 0xffff); + if (nasid_shift) *nasid_shift = (ret_stuff.v1 >> 16) & 0xff; + return 0; +} + +/* + * This is the access point to the Altix PROM hardware performance + * and status monitoring interface. For info on using this, see + * arch/ia64/include/asm/sn/sn2/sn_hwperf.h + */ +static inline int +ia64_sn_hwperf_op(nasid_t nasid, u64 opcode, u64 a0, u64 a1, u64 a2, + u64 a3, u64 a4, int *v0) +{ + struct ia64_sal_retval rv; + SAL_CALL_NOLOCK(rv, SN_SAL_HWPERF_OP, (u64)nasid, + opcode, a0, a1, a2, a3, a4); + if (v0) + *v0 = (int) rv.v0; + return (int) rv.status; +} + +static inline int +ia64_sn_ioif_get_pci_topology(u64 buf, u64 len) +{ + struct ia64_sal_retval rv; + SAL_CALL_NOLOCK(rv, SN_SAL_IOIF_GET_PCI_TOPOLOGY, buf, len, 0, 0, 0, 0, 0); + return (int) rv.status; +} + +/* + * BTE error recovery is implemented in SAL + */ +static inline int +ia64_sn_bte_recovery(nasid_t nasid) +{ + struct ia64_sal_retval rv; + + rv.status = 0; + SAL_CALL_NOLOCK(rv, SN_SAL_BTE_RECOVER, (u64)nasid, 0, 0, 0, 0, 0, 0); + if (rv.status == SALRET_NOT_IMPLEMENTED) + return 0; + return (int) rv.status; +} + +static inline int +ia64_sn_is_fake_prom(void) +{ + struct ia64_sal_retval rv; + SAL_CALL_NOLOCK(rv, SN_SAL_FAKE_PROM, 0, 0, 0, 0, 0, 0, 0); + return (rv.status == 0); +} + +static inline int +ia64_sn_get_prom_feature_set(int set, unsigned long *feature_set) +{ + struct ia64_sal_retval rv; + + SAL_CALL_NOLOCK(rv, SN_SAL_GET_PROM_FEATURE_SET, set, 0, 0, 0, 0, 0, 0); + if (rv.status != 0) + return rv.status; + *feature_set = rv.v0; + return 0; +} + +static inline int +ia64_sn_set_os_feature(int feature) +{ + struct ia64_sal_retval rv; + + SAL_CALL_NOLOCK(rv, SN_SAL_SET_OS_FEATURE_SET, feature, 0, 0, 0, 0, 0, 0); + return rv.status; +} + +static inline int +sn_inject_error(u64 paddr, u64 *data, u64 *ecc) +{ + struct ia64_sal_retval ret_stuff; + + ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_INJECT_ERROR, paddr, (u64)data, + (u64)ecc, 0, 0, 0, 0); + return ret_stuff.status; +} + +static inline int +ia64_sn_set_cpu_number(int cpu) +{ + struct ia64_sal_retval rv; + + SAL_CALL_NOLOCK(rv, SN_SAL_SET_CPU_NUMBER, cpu, 0, 0, 0, 0, 0, 0); + return rv.status; +} +static inline int +ia64_sn_kernel_launch_event(void) +{ + struct ia64_sal_retval rv; + SAL_CALL_NOLOCK(rv, SN_SAL_KERNEL_LAUNCH_EVENT, 0, 0, 0, 0, 0, 0, 0); + return rv.status; +} +#endif /* _ASM_IA64_SN_SN_SAL_H */ diff --git a/arch/ia64/include/asm/sn/tioca.h b/arch/ia64/include/asm/sn/tioca.h new file mode 100644 index 00000000000..666222d7f0f --- /dev/null +++ b/arch/ia64/include/asm/sn/tioca.h @@ -0,0 +1,596 @@ +#ifndef _ASM_IA64_SN_TIO_TIOCA_H +#define _ASM_IA64_SN_TIO_TIOCA_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved. + */ + + +#define TIOCA_PART_NUM 0xE020 +#define TIOCA_MFGR_NUM 0x24 +#define TIOCA_REV_A 0x1 + +/* + * Register layout for TIO:CA. See below for bitmasks for each register. + */ + +struct tioca { + u64 ca_id; /* 0x000000 */ + u64 ca_control1; /* 0x000008 */ + u64 ca_control2; /* 0x000010 */ + u64 ca_status1; /* 0x000018 */ + u64 ca_status2; /* 0x000020 */ + u64 ca_gart_aperature; /* 0x000028 */ + u64 ca_gfx_detach; /* 0x000030 */ + u64 ca_inta_dest_addr; /* 0x000038 */ + u64 ca_intb_dest_addr; /* 0x000040 */ + u64 ca_err_int_dest_addr; /* 0x000048 */ + u64 ca_int_status; /* 0x000050 */ + u64 ca_int_status_alias; /* 0x000058 */ + u64 ca_mult_error; /* 0x000060 */ + u64 ca_mult_error_alias; /* 0x000068 */ + u64 ca_first_error; /* 0x000070 */ + u64 ca_int_mask; /* 0x000078 */ + u64 ca_crm_pkterr_type; /* 0x000080 */ + u64 ca_crm_pkterr_type_alias; /* 0x000088 */ + u64 ca_crm_ct_error_detail_1; /* 0x000090 */ + u64 ca_crm_ct_error_detail_2; /* 0x000098 */ + u64 ca_crm_tnumto; /* 0x0000A0 */ + u64 ca_gart_err; /* 0x0000A8 */ + u64 ca_pcierr_type; /* 0x0000B0 */ + u64 ca_pcierr_addr; /* 0x0000B8 */ + + u64 ca_pad_0000C0[3]; /* 0x0000{C0..D0} */ + + u64 ca_pci_rd_buf_flush; /* 0x0000D8 */ + u64 ca_pci_dma_addr_extn; /* 0x0000E0 */ + u64 ca_agp_dma_addr_extn; /* 0x0000E8 */ + u64 ca_force_inta; /* 0x0000F0 */ + u64 ca_force_intb; /* 0x0000F8 */ + u64 ca_debug_vector_sel; /* 0x000100 */ + u64 ca_debug_mux_core_sel; /* 0x000108 */ + u64 ca_debug_mux_pci_sel; /* 0x000110 */ + u64 ca_debug_domain_sel; /* 0x000118 */ + + u64 ca_pad_000120[28]; /* 0x0001{20..F8} */ + + u64 ca_gart_ptr_table; /* 0x200 */ + u64 ca_gart_tlb_addr[8]; /* 0x2{08..40} */ +}; + +/* + * Mask/shift definitions for TIO:CA registers. The convention here is + * to mainly use the names as they appear in the "TIO AEGIS Programmers' + * Reference" with a CA_ prefix added. Some exceptions were made to fix + * duplicate field names or to generalize fields that are common to + * different registers (ca_debug_mux_core_sel and ca_debug_mux_pci_sel for + * example). + * + * Fields consisting of a single bit have a single #define have a single + * macro declaration to mask the bit. Fields consisting of multiple bits + * have two declarations: one to mask the proper bits in a register, and + * a second with the suffix "_SHFT" to identify how far the mask needs to + * be shifted right to get its base value. + */ + +/* ==== ca_control1 */ +#define CA_SYS_BIG_END (1ull << 0) +#define CA_DMA_AGP_SWAP (1ull << 1) +#define CA_DMA_PCI_SWAP (1ull << 2) +#define CA_PIO_IO_SWAP (1ull << 3) +#define CA_PIO_MEM_SWAP (1ull << 4) +#define CA_GFX_WR_SWAP (1ull << 5) +#define CA_AGP_FW_ENABLE (1ull << 6) +#define CA_AGP_CAL_CYCLE (0x7ull << 7) +#define CA_AGP_CAL_CYCLE_SHFT 7 +#define CA_AGP_CAL_PRSCL_BYP (1ull << 10) +#define CA_AGP_INIT_CAL_ENB (1ull << 11) +#define CA_INJ_ADDR_PERR (1ull << 12) +#define CA_INJ_DATA_PERR (1ull << 13) + /* bits 15:14 unused */ +#define CA_PCIM_IO_NBE_AD (0x7ull << 16) +#define CA_PCIM_IO_NBE_AD_SHFT 16 +#define CA_PCIM_FAST_BTB_ENB (1ull << 19) + /* bits 23:20 unused */ +#define CA_PIO_ADDR_OFFSET (0xffull << 24) +#define CA_PIO_ADDR_OFFSET_SHFT 24 + /* bits 35:32 unused */ +#define CA_AGPDMA_OP_COMBDELAY (0x1full << 36) +#define CA_AGPDMA_OP_COMBDELAY_SHFT 36 + /* bit 41 unused */ +#define CA_AGPDMA_OP_ENB_COMBDELAY (1ull << 42) +#define CA_PCI_INT_LPCNT (0xffull << 44) +#define CA_PCI_INT_LPCNT_SHFT 44 + /* bits 63:52 unused */ + +/* ==== ca_control2 */ +#define CA_AGP_LATENCY_TO (0xffull << 0) +#define CA_AGP_LATENCY_TO_SHFT 0 +#define CA_PCI_LATENCY_TO (0xffull << 8) +#define CA_PCI_LATENCY_TO_SHFT 8 +#define CA_PCI_MAX_RETRY (0x3ffull << 16) +#define CA_PCI_MAX_RETRY_SHFT 16 + /* bits 27:26 unused */ +#define CA_RT_INT_EN (0x3ull << 28) +#define CA_RT_INT_EN_SHFT 28 +#define CA_MSI_INT_ENB (1ull << 30) +#define CA_PCI_ARB_ERR_ENB (1ull << 31) +#define CA_GART_MEM_PARAM (0x3ull << 32) +#define CA_GART_MEM_PARAM_SHFT 32 +#define CA_GART_RD_PREFETCH_ENB (1ull << 34) +#define CA_GART_WR_PREFETCH_ENB (1ull << 35) +#define CA_GART_FLUSH_TLB (1ull << 36) + /* bits 39:37 unused */ +#define CA_CRM_TNUMTO_PERIOD (0x1fffull << 40) +#define CA_CRM_TNUMTO_PERIOD_SHFT 40 + /* bits 55:53 unused */ +#define CA_CRM_TNUMTO_ENB (1ull << 56) +#define CA_CRM_PRESCALER_BYP (1ull << 57) + /* bits 59:58 unused */ +#define CA_CRM_MAX_CREDIT (0x7ull << 60) +#define CA_CRM_MAX_CREDIT_SHFT 60 + /* bit 63 unused */ + +/* ==== ca_status1 */ +#define CA_CORELET_ID (0x3ull << 0) +#define CA_CORELET_ID_SHFT 0 +#define CA_INTA_N (1ull << 2) +#define CA_INTB_N (1ull << 3) +#define CA_CRM_CREDIT_AVAIL (0x7ull << 4) +#define CA_CRM_CREDIT_AVAIL_SHFT 4 + /* bit 7 unused */ +#define CA_CRM_SPACE_AVAIL (0x7full << 8) +#define CA_CRM_SPACE_AVAIL_SHFT 8 + /* bit 15 unused */ +#define CA_GART_TLB_VAL (0xffull << 16) +#define CA_GART_TLB_VAL_SHFT 16 + /* bits 63:24 unused */ + +/* ==== ca_status2 */ +#define CA_GFX_CREDIT_AVAIL (0xffull << 0) +#define CA_GFX_CREDIT_AVAIL_SHFT 0 +#define CA_GFX_OPQ_AVAIL (0xffull << 8) +#define CA_GFX_OPQ_AVAIL_SHFT 8 +#define CA_GFX_WRBUFF_AVAIL (0xffull << 16) +#define CA_GFX_WRBUFF_AVAIL_SHFT 16 +#define CA_ADMA_OPQ_AVAIL (0xffull << 24) +#define CA_ADMA_OPQ_AVAIL_SHFT 24 +#define CA_ADMA_WRBUFF_AVAIL (0xffull << 32) +#define CA_ADMA_WRBUFF_AVAIL_SHFT 32 +#define CA_ADMA_RDBUFF_AVAIL (0x7full << 40) +#define CA_ADMA_RDBUFF_AVAIL_SHFT 40 +#define CA_PCI_PIO_OP_STAT (1ull << 47) +#define CA_PDMA_OPQ_AVAIL (0xfull << 48) +#define CA_PDMA_OPQ_AVAIL_SHFT 48 +#define CA_PDMA_WRBUFF_AVAIL (0xfull << 52) +#define CA_PDMA_WRBUFF_AVAIL_SHFT 52 +#define CA_PDMA_RDBUFF_AVAIL (0x3ull << 56) +#define CA_PDMA_RDBUFF_AVAIL_SHFT 56 + /* bits 63:58 unused */ + +/* ==== ca_gart_aperature */ +#define CA_GART_AP_ENB_AGP (1ull << 0) +#define CA_GART_PAGE_SIZE (1ull << 1) +#define CA_GART_AP_ENB_PCI (1ull << 2) + /* bits 11:3 unused */ +#define CA_GART_AP_SIZE (0x3ffull << 12) +#define CA_GART_AP_SIZE_SHFT 12 +#define CA_GART_AP_BASE (0x3ffffffffffull << 22) +#define CA_GART_AP_BASE_SHFT 22 + +/* ==== ca_inta_dest_addr + ==== ca_intb_dest_addr + ==== ca_err_int_dest_addr */ + /* bits 2:0 unused */ +#define CA_INT_DEST_ADDR (0x7ffffffffffffull << 3) +#define CA_INT_DEST_ADDR_SHFT 3 + /* bits 55:54 unused */ +#define CA_INT_DEST_VECT (0xffull << 56) +#define CA_INT_DEST_VECT_SHFT 56 + +/* ==== ca_int_status */ +/* ==== ca_int_status_alias */ +/* ==== ca_mult_error */ +/* ==== ca_mult_error_alias */ +/* ==== ca_first_error */ +/* ==== ca_int_mask */ +#define CA_PCI_ERR (1ull << 0) + /* bits 3:1 unused */ +#define CA_GART_FETCH_ERR (1ull << 4) +#define CA_GFX_WR_OVFLW (1ull << 5) +#define CA_PIO_REQ_OVFLW (1ull << 6) +#define CA_CRM_PKTERR (1ull << 7) +#define CA_CRM_DVERR (1ull << 8) +#define CA_TNUMTO (1ull << 9) +#define CA_CXM_RSP_CRED_OVFLW (1ull << 10) +#define CA_CXM_REQ_CRED_OVFLW (1ull << 11) +#define CA_PIO_INVALID_ADDR (1ull << 12) +#define CA_PCI_ARB_TO (1ull << 13) +#define CA_AGP_REQ_OFLOW (1ull << 14) +#define CA_SBA_TYPE1_ERR (1ull << 15) + /* bit 16 unused */ +#define CA_INTA (1ull << 17) +#define CA_INTB (1ull << 18) +#define CA_MULT_INTA (1ull << 19) +#define CA_MULT_INTB (1ull << 20) +#define CA_GFX_CREDIT_OVFLW (1ull << 21) + /* bits 63:22 unused */ + +/* ==== ca_crm_pkterr_type */ +/* ==== ca_crm_pkterr_type_alias */ +#define CA_CRM_PKTERR_SBERR_HDR (1ull << 0) +#define CA_CRM_PKTERR_DIDN (1ull << 1) +#define CA_CRM_PKTERR_PACTYPE (1ull << 2) +#define CA_CRM_PKTERR_INV_TNUM (1ull << 3) +#define CA_CRM_PKTERR_ADDR_RNG (1ull << 4) +#define CA_CRM_PKTERR_ADDR_ALGN (1ull << 5) +#define CA_CRM_PKTERR_HDR_PARAM (1ull << 6) +#define CA_CRM_PKTERR_CW_ERR (1ull << 7) +#define CA_CRM_PKTERR_SBERR_NH (1ull << 8) +#define CA_CRM_PKTERR_EARLY_TERM (1ull << 9) +#define CA_CRM_PKTERR_EARLY_TAIL (1ull << 10) +#define CA_CRM_PKTERR_MSSNG_TAIL (1ull << 11) +#define CA_CRM_PKTERR_MSSNG_HDR (1ull << 12) + /* bits 15:13 unused */ +#define CA_FIRST_CRM_PKTERR_SBERR_HDR (1ull << 16) +#define CA_FIRST_CRM_PKTERR_DIDN (1ull << 17) +#define CA_FIRST_CRM_PKTERR_PACTYPE (1ull << 18) +#define CA_FIRST_CRM_PKTERR_INV_TNUM (1ull << 19) +#define CA_FIRST_CRM_PKTERR_ADDR_RNG (1ull << 20) +#define CA_FIRST_CRM_PKTERR_ADDR_ALGN (1ull << 21) +#define CA_FIRST_CRM_PKTERR_HDR_PARAM (1ull << 22) +#define CA_FIRST_CRM_PKTERR_CW_ERR (1ull << 23) +#define CA_FIRST_CRM_PKTERR_SBERR_NH (1ull << 24) +#define CA_FIRST_CRM_PKTERR_EARLY_TERM (1ull << 25) +#define CA_FIRST_CRM_PKTERR_EARLY_TAIL (1ull << 26) +#define CA_FIRST_CRM_PKTERR_MSSNG_TAIL (1ull << 27) +#define CA_FIRST_CRM_PKTERR_MSSNG_HDR (1ull << 28) + /* bits 63:29 unused */ + +/* ==== ca_crm_ct_error_detail_1 */ +#define CA_PKT_TYPE (0xfull << 0) +#define CA_PKT_TYPE_SHFT 0 +#define CA_SRC_ID (0x3ull << 4) +#define CA_SRC_ID_SHFT 4 +#define CA_DATA_SZ (0x3ull << 6) +#define CA_DATA_SZ_SHFT 6 +#define CA_TNUM (0xffull << 8) +#define CA_TNUM_SHFT 8 +#define CA_DW_DATA_EN (0xffull << 16) +#define CA_DW_DATA_EN_SHFT 16 +#define CA_GFX_CRED (0xffull << 24) +#define CA_GFX_CRED_SHFT 24 +#define CA_MEM_RD_PARAM (0x3ull << 32) +#define CA_MEM_RD_PARAM_SHFT 32 +#define CA_PIO_OP (1ull << 34) +#define CA_CW_ERR (1ull << 35) + /* bits 62:36 unused */ +#define CA_VALID (1ull << 63) + +/* ==== ca_crm_ct_error_detail_2 */ + /* bits 2:0 unused */ +#define CA_PKT_ADDR (0x1fffffffffffffull << 3) +#define CA_PKT_ADDR_SHFT 3 + /* bits 63:56 unused */ + +/* ==== ca_crm_tnumto */ +#define CA_CRM_TNUMTO_VAL (0xffull << 0) +#define CA_CRM_TNUMTO_VAL_SHFT 0 +#define CA_CRM_TNUMTO_WR (1ull << 8) + /* bits 63:9 unused */ + +/* ==== ca_gart_err */ +#define CA_GART_ERR_SOURCE (0x3ull << 0) +#define CA_GART_ERR_SOURCE_SHFT 0 + /* bits 3:2 unused */ +#define CA_GART_ERR_ADDR (0xfffffffffull << 4) +#define CA_GART_ERR_ADDR_SHFT 4 + /* bits 63:40 unused */ + +/* ==== ca_pcierr_type */ +#define CA_PCIERR_DATA (0xffffffffull << 0) +#define CA_PCIERR_DATA_SHFT 0 +#define CA_PCIERR_ENB (0xfull << 32) +#define CA_PCIERR_ENB_SHFT 32 +#define CA_PCIERR_CMD (0xfull << 36) +#define CA_PCIERR_CMD_SHFT 36 +#define CA_PCIERR_A64 (1ull << 40) +#define CA_PCIERR_SLV_SERR (1ull << 41) +#define CA_PCIERR_SLV_WR_PERR (1ull << 42) +#define CA_PCIERR_SLV_RD_PERR (1ull << 43) +#define CA_PCIERR_MST_SERR (1ull << 44) +#define CA_PCIERR_MST_WR_PERR (1ull << 45) +#define CA_PCIERR_MST_RD_PERR (1ull << 46) +#define CA_PCIERR_MST_MABT (1ull << 47) +#define CA_PCIERR_MST_TABT (1ull << 48) +#define CA_PCIERR_MST_RETRY_TOUT (1ull << 49) + +#define CA_PCIERR_TYPES \ + (CA_PCIERR_A64|CA_PCIERR_SLV_SERR| \ + CA_PCIERR_SLV_WR_PERR|CA_PCIERR_SLV_RD_PERR| \ + CA_PCIERR_MST_SERR|CA_PCIERR_MST_WR_PERR|CA_PCIERR_MST_RD_PERR| \ + CA_PCIERR_MST_MABT|CA_PCIERR_MST_TABT|CA_PCIERR_MST_RETRY_TOUT) + + /* bits 63:50 unused */ + +/* ==== ca_pci_dma_addr_extn */ +#define CA_UPPER_NODE_OFFSET (0x3full << 0) +#define CA_UPPER_NODE_OFFSET_SHFT 0 + /* bits 7:6 unused */ +#define CA_CHIPLET_ID (0x3ull << 8) +#define CA_CHIPLET_ID_SHFT 8 + /* bits 11:10 unused */ +#define CA_PCI_DMA_NODE_ID (0xffffull << 12) +#define CA_PCI_DMA_NODE_ID_SHFT 12 + /* bits 27:26 unused */ +#define CA_PCI_DMA_PIO_MEM_TYPE (1ull << 28) + /* bits 63:29 unused */ + + +/* ==== ca_agp_dma_addr_extn */ + /* bits 19:0 unused */ +#define CA_AGP_DMA_NODE_ID (0xffffull << 20) +#define CA_AGP_DMA_NODE_ID_SHFT 20 + /* bits 27:26 unused */ +#define CA_AGP_DMA_PIO_MEM_TYPE (1ull << 28) + /* bits 63:29 unused */ + +/* ==== ca_debug_vector_sel */ +#define CA_DEBUG_MN_VSEL (0xfull << 0) +#define CA_DEBUG_MN_VSEL_SHFT 0 +#define CA_DEBUG_PP_VSEL (0xfull << 4) +#define CA_DEBUG_PP_VSEL_SHFT 4 +#define CA_DEBUG_GW_VSEL (0xfull << 8) +#define CA_DEBUG_GW_VSEL_SHFT 8 +#define CA_DEBUG_GT_VSEL (0xfull << 12) +#define CA_DEBUG_GT_VSEL_SHFT 12 +#define CA_DEBUG_PD_VSEL (0xfull << 16) +#define CA_DEBUG_PD_VSEL_SHFT 16 +#define CA_DEBUG_AD_VSEL (0xfull << 20) +#define CA_DEBUG_AD_VSEL_SHFT 20 +#define CA_DEBUG_CX_VSEL (0xfull << 24) +#define CA_DEBUG_CX_VSEL_SHFT 24 +#define CA_DEBUG_CR_VSEL (0xfull << 28) +#define CA_DEBUG_CR_VSEL_SHFT 28 +#define CA_DEBUG_BA_VSEL (0xfull << 32) +#define CA_DEBUG_BA_VSEL_SHFT 32 +#define CA_DEBUG_PE_VSEL (0xfull << 36) +#define CA_DEBUG_PE_VSEL_SHFT 36 +#define CA_DEBUG_BO_VSEL (0xfull << 40) +#define CA_DEBUG_BO_VSEL_SHFT 40 +#define CA_DEBUG_BI_VSEL (0xfull << 44) +#define CA_DEBUG_BI_VSEL_SHFT 44 +#define CA_DEBUG_AS_VSEL (0xfull << 48) +#define CA_DEBUG_AS_VSEL_SHFT 48 +#define CA_DEBUG_PS_VSEL (0xfull << 52) +#define CA_DEBUG_PS_VSEL_SHFT 52 +#define CA_DEBUG_PM_VSEL (0xfull << 56) +#define CA_DEBUG_PM_VSEL_SHFT 56 + /* bits 63:60 unused */ + +/* ==== ca_debug_mux_core_sel */ +/* ==== ca_debug_mux_pci_sel */ +#define CA_DEBUG_MSEL0 (0x7ull << 0) +#define CA_DEBUG_MSEL0_SHFT 0 + /* bit 3 unused */ +#define CA_DEBUG_NSEL0 (0x7ull << 4) +#define CA_DEBUG_NSEL0_SHFT 4 + /* bit 7 unused */ +#define CA_DEBUG_MSEL1 (0x7ull << 8) +#define CA_DEBUG_MSEL1_SHFT 8 + /* bit 11 unused */ +#define CA_DEBUG_NSEL1 (0x7ull << 12) +#define CA_DEBUG_NSEL1_SHFT 12 + /* bit 15 unused */ +#define CA_DEBUG_MSEL2 (0x7ull << 16) +#define CA_DEBUG_MSEL2_SHFT 16 + /* bit 19 unused */ +#define CA_DEBUG_NSEL2 (0x7ull << 20) +#define CA_DEBUG_NSEL2_SHFT 20 + /* bit 23 unused */ +#define CA_DEBUG_MSEL3 (0x7ull << 24) +#define CA_DEBUG_MSEL3_SHFT 24 + /* bit 27 unused */ +#define CA_DEBUG_NSEL3 (0x7ull << 28) +#define CA_DEBUG_NSEL3_SHFT 28 + /* bit 31 unused */ +#define CA_DEBUG_MSEL4 (0x7ull << 32) +#define CA_DEBUG_MSEL4_SHFT 32 + /* bit 35 unused */ +#define CA_DEBUG_NSEL4 (0x7ull << 36) +#define CA_DEBUG_NSEL4_SHFT 36 + /* bit 39 unused */ +#define CA_DEBUG_MSEL5 (0x7ull << 40) +#define CA_DEBUG_MSEL5_SHFT 40 + /* bit 43 unused */ +#define CA_DEBUG_NSEL5 (0x7ull << 44) +#define CA_DEBUG_NSEL5_SHFT 44 + /* bit 47 unused */ +#define CA_DEBUG_MSEL6 (0x7ull << 48) +#define CA_DEBUG_MSEL6_SHFT 48 + /* bit 51 unused */ +#define CA_DEBUG_NSEL6 (0x7ull << 52) +#define CA_DEBUG_NSEL6_SHFT 52 + /* bit 55 unused */ +#define CA_DEBUG_MSEL7 (0x7ull << 56) +#define CA_DEBUG_MSEL7_SHFT 56 + /* bit 59 unused */ +#define CA_DEBUG_NSEL7 (0x7ull << 60) +#define CA_DEBUG_NSEL7_SHFT 60 + /* bit 63 unused */ + + +/* ==== ca_debug_domain_sel */ +#define CA_DEBUG_DOMAIN_L (1ull << 0) +#define CA_DEBUG_DOMAIN_H (1ull << 1) + /* bits 63:2 unused */ + +/* ==== ca_gart_ptr_table */ +#define CA_GART_PTR_VAL (1ull << 0) + /* bits 11:1 unused */ +#define CA_GART_PTR_ADDR (0xfffffffffffull << 12) +#define CA_GART_PTR_ADDR_SHFT 12 + /* bits 63:56 unused */ + +/* ==== ca_gart_tlb_addr[0-7] */ +#define CA_GART_TLB_ADDR (0xffffffffffffffull << 0) +#define CA_GART_TLB_ADDR_SHFT 0 + /* bits 62:56 unused */ +#define CA_GART_TLB_ENTRY_VAL (1ull << 63) + +/* + * PIO address space ranges for TIO:CA + */ + +/* CA internal registers */ +#define CA_PIO_ADMIN 0x00000000 +#define CA_PIO_ADMIN_LEN 0x00010000 + +/* GFX Write Buffer - Diagnostics */ +#define CA_PIO_GFX 0x00010000 +#define CA_PIO_GFX_LEN 0x00010000 + +/* AGP DMA Write Buffer - Diagnostics */ +#define CA_PIO_AGP_DMAWRITE 0x00020000 +#define CA_PIO_AGP_DMAWRITE_LEN 0x00010000 + +/* AGP DMA READ Buffer - Diagnostics */ +#define CA_PIO_AGP_DMAREAD 0x00030000 +#define CA_PIO_AGP_DMAREAD_LEN 0x00010000 + +/* PCI Config Type 0 */ +#define CA_PIO_PCI_TYPE0_CONFIG 0x01000000 +#define CA_PIO_PCI_TYPE0_CONFIG_LEN 0x01000000 + +/* PCI Config Type 1 */ +#define CA_PIO_PCI_TYPE1_CONFIG 0x02000000 +#define CA_PIO_PCI_TYPE1_CONFIG_LEN 0x01000000 + +/* PCI I/O Cycles - mapped to PCI Address 0x00000000-0x04ffffff */ +#define CA_PIO_PCI_IO 0x03000000 +#define CA_PIO_PCI_IO_LEN 0x05000000 + +/* PCI MEM Cycles - mapped to PCI with CA_PIO_ADDR_OFFSET of ca_control1 */ +/* use Fast Write if enabled and coretalk packet type is a GFX request */ +#define CA_PIO_PCI_MEM_OFFSET 0x08000000 +#define CA_PIO_PCI_MEM_OFFSET_LEN 0x08000000 + +/* PCI MEM Cycles - mapped to PCI Address 0x00000000-0xbfffffff */ +/* use Fast Write if enabled and coretalk packet type is a GFX request */ +#define CA_PIO_PCI_MEM 0x40000000 +#define CA_PIO_PCI_MEM_LEN 0xc0000000 + +/* + * DMA space + * + * The CA aperature (ie. bus address range) mapped by the GART is segmented into + * two parts. The lower portion of the aperature is used for mapping 32 bit + * PCI addresses which are managed by the dma interfaces in this file. The + * upper poprtion of the aperature is used for mapping 48 bit AGP addresses. + * The AGP portion of the aperature is managed by the agpgart_be.c driver + * in drivers/linux/agp. There are ca-specific hooks in that driver to + * manipulate the gart, but management of the AGP portion of the aperature + * is the responsibility of that driver. + * + * CA allows three main types of DMA mapping: + * + * PCI 64-bit Managed by this driver + * PCI 32-bit Managed by this driver + * AGP 48-bit Managed by hooks in the /dev/agpgart driver + * + * All of the above can optionally be remapped through the GART. The following + * table lists the combinations of addressing types and GART remapping that + * is currently supported by the driver (h/w supports all, s/w limits this): + * + * PCI64 PCI32 AGP48 + * GART no yes yes + * Direct yes yes no + * + * GART remapping of PCI64 is not done because there is no need to. The + * 64 bit PCI address holds all of the information necessary to target any + * memory in the system. + * + * AGP48 is always mapped through the GART. Management of the AGP48 portion + * of the aperature is the responsibility of code in the agpgart_be driver. + * + * The non-64 bit bus address space will currently be partitioned like this: + * + * 0xffff_ffff_ffff +-------- + * | AGP48 direct + * | Space managed by this driver + * CA_AGP_DIRECT_BASE +-------- + * | AGP GART mapped (gfx aperature) + * | Space managed by /dev/agpgart driver + * | This range is exposed to the agpgart + * | driver as the "graphics aperature" + * CA_AGP_MAPPED_BASE +----- + * | PCI GART mapped + * | Space managed by this driver + * CA_PCI32_MAPPED_BASE +---- + * | PCI32 direct + * | Space managed by this driver + * 0xC000_0000 +-------- + * (CA_PCI32_DIRECT_BASE) + * + * The bus address range CA_PCI32_MAPPED_BASE through CA_AGP_DIRECT_BASE + * is what we call the CA aperature. Addresses falling in this range will + * be remapped using the GART. + * + * The bus address range CA_AGP_MAPPED_BASE through CA_AGP_DIRECT_BASE + * is what we call the graphics aperature. This is a subset of the CA + * aperature and is under the control of the agpgart_be driver. + * + * CA_PCI32_MAPPED_BASE, CA_AGP_MAPPED_BASE, and CA_AGP_DIRECT_BASE are + * somewhat arbitrary values. The known constraints on choosing these is: + * + * 1) CA_AGP_DIRECT_BASE-CA_PCI32_MAPPED_BASE+1 (the CA aperature size) + * must be one of the values supported by the ca_gart_aperature register. + * Currently valid values are: 4MB through 4096MB in powers of 2 increments + * + * 2) CA_AGP_DIRECT_BASE-CA_AGP_MAPPED_BASE+1 (the gfx aperature size) + * must be in MB units since that's what the agpgart driver assumes. + */ + +/* + * Define Bus DMA ranges. These are configurable (see constraints above) + * and will probably need tuning based on experience. + */ + + +/* + * 11/24/03 + * CA has an addressing glitch w.r.t. PCI direct 32 bit DMA that makes it + * generally unusable. The problem is that for PCI direct 32 + * DMA's, all 32 bits of the bus address are used to form the lower 32 bits + * of the coretalk address, and coretalk bits 38:32 come from a register. + * Since only PCI bus addresses 0xC0000000-0xFFFFFFFF (1GB) are available + * for DMA (the rest is allocated to PIO), host node addresses need to be + * such that their lower 32 bits fall in the 0xC0000000-0xffffffff range + * as well. So there can be no PCI32 direct DMA below 3GB!! For this + * reason we set the CA_PCI32_DIRECT_SIZE to 0 which essentially makes + * tioca_dma_direct32() a noop but preserves the code flow should this issue + * be fixed in a respin. + * + * For now, all PCI32 DMA's must be mapped through the GART. + */ + +#define CA_PCI32_DIRECT_BASE 0xC0000000UL /* BASE not configurable */ +#define CA_PCI32_DIRECT_SIZE 0x00000000UL /* 0 MB */ + +#define CA_PCI32_MAPPED_BASE 0xC0000000UL +#define CA_PCI32_MAPPED_SIZE 0x40000000UL /* 2GB */ + +#define CA_AGP_MAPPED_BASE 0x80000000UL +#define CA_AGP_MAPPED_SIZE 0x40000000UL /* 2GB */ + +#define CA_AGP_DIRECT_BASE 0x40000000UL /* 2GB */ +#define CA_AGP_DIRECT_SIZE 0x40000000UL + +#define CA_APERATURE_BASE (CA_AGP_MAPPED_BASE) +#define CA_APERATURE_SIZE (CA_AGP_MAPPED_SIZE+CA_PCI32_MAPPED_SIZE) + +#endif /* _ASM_IA64_SN_TIO_TIOCA_H */ diff --git a/arch/ia64/include/asm/sn/tioca_provider.h b/arch/ia64/include/asm/sn/tioca_provider.h new file mode 100644 index 00000000000..9a820ac61be --- /dev/null +++ b/arch/ia64/include/asm/sn/tioca_provider.h @@ -0,0 +1,207 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H +#define _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H + +#include <asm/sn/tioca.h> + +/* + * WAR enables + * Defines for individual WARs. Each is a bitmask of applicable + * part revision numbers. (1 << 1) == rev A, (1 << 2) == rev B, + * (3 << 1) == (rev A or rev B), etc + */ + +#define TIOCA_WAR_ENABLED(pv, tioca_common) \ + ((1 << tioca_common->ca_rev) & pv) + + /* TIO:ICE:FRZ:Freezer loses a PIO data ucred on PIO RD RSP with CW error */ +#define PV907908 (1 << 1) + /* ATI config space problems after BIOS execution starts */ +#define PV908234 (1 << 1) + /* CA:AGPDMA write request data mismatch with ABC1CL merge */ +#define PV895469 (1 << 1) + /* TIO:CA TLB invalidate of written GART entries possibly not occurring in CA*/ +#define PV910244 (1 << 1) + +struct tioca_dmamap{ + struct list_head cad_list; /* headed by ca_list */ + + dma_addr_t cad_dma_addr; /* Linux dma handle */ + uint cad_gart_entry; /* start entry in ca_gart_pagemap */ + uint cad_gart_size; /* #entries for this map */ +}; + +/* + * Kernel only fields. Prom may look at this stuff for debugging only. + * Access this structure through the ca_kernel_private ptr. + */ + +struct tioca_common ; + +struct tioca_kernel { + struct tioca_common *ca_common; /* tioca this belongs to */ + struct list_head ca_list; /* list of all ca's */ + struct list_head ca_dmamaps; + spinlock_t ca_lock; /* Kernel lock */ + cnodeid_t ca_closest_node; + struct list_head *ca_devices; /* bus->devices */ + + /* + * General GART stuff + */ + u64 ca_ap_size; /* size of aperature in bytes */ + u32 ca_gart_entries; /* # u64 entries in gart */ + u32 ca_ap_pagesize; /* aperature page size in bytes */ + u64 ca_ap_bus_base; /* bus address of CA aperature */ + u64 ca_gart_size; /* gart size in bytes */ + u64 *ca_gart; /* gart table vaddr */ + u64 ca_gart_coretalk_addr; /* gart coretalk addr */ + u8 ca_gart_iscoherent; /* used in tioca_tlbflush */ + + /* PCI GART convenience values */ + u64 ca_pciap_base; /* pci aperature bus base address */ + u64 ca_pciap_size; /* pci aperature size (bytes) */ + u64 ca_pcigart_base; /* gfx GART bus base address */ + u64 *ca_pcigart; /* gfx GART vm address */ + u32 ca_pcigart_entries; + u32 ca_pcigart_start; /* PCI start index in ca_gart */ + void *ca_pcigart_pagemap; + + /* AGP GART convenience values */ + u64 ca_gfxap_base; /* gfx aperature bus base address */ + u64 ca_gfxap_size; /* gfx aperature size (bytes) */ + u64 ca_gfxgart_base; /* gfx GART bus base address */ + u64 *ca_gfxgart; /* gfx GART vm address */ + u32 ca_gfxgart_entries; + u32 ca_gfxgart_start; /* agpgart start index in ca_gart */ +}; + +/* + * Common tioca info shared between kernel and prom + * + * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES + * TO THE PROM VERSION. + */ + +struct tioca_common { + struct pcibus_bussoft ca_common; /* common pciio header */ + + u32 ca_rev; + u32 ca_closest_nasid; + + u64 ca_prom_private; + u64 ca_kernel_private; +}; + +/** + * tioca_paddr_to_gart - Convert an SGI coretalk address to a CA GART entry + * @paddr: page address to convert + * + * Convert a system [coretalk] address to a GART entry. GART entries are + * formed using the following: + * + * data = ( (1<<63) | ( (REMAP_NODE_ID << 40) | (MD_CHIPLET_ID << 38) | + * (REMAP_SYS_ADDR) ) >> 12 ) + * + * DATA written to 1 GART TABLE Entry in system memory is remapped system + * addr for 1 page + * + * The data is for coretalk address format right shifted 12 bits with a + * valid bit. + * + * GART_TABLE_ENTRY [ 25:0 ] -- REMAP_SYS_ADDRESS[37:12]. + * GART_TABLE_ENTRY [ 27:26 ] -- SHUB MD chiplet id. + * GART_TABLE_ENTRY [ 41:28 ] -- REMAP_NODE_ID. + * GART_TABLE_ENTRY [ 63 ] -- Valid Bit + */ +static inline u64 +tioca_paddr_to_gart(unsigned long paddr) +{ + /* + * We are assuming right now that paddr already has the correct + * format since the address from xtalk_dmaXXX should already have + * NODE_ID, CHIPLET_ID, and SYS_ADDR in the correct locations. + */ + + return ((paddr) >> 12) | (1UL << 63); +} + +/** + * tioca_physpage_to_gart - Map a host physical page for SGI CA based DMA + * @page_addr: system page address to map + */ + +static inline unsigned long +tioca_physpage_to_gart(u64 page_addr) +{ + u64 coretalk_addr; + + coretalk_addr = PHYS_TO_TIODMA(page_addr); + if (!coretalk_addr) { + return 0; + } + + return tioca_paddr_to_gart(coretalk_addr); +} + +/** + * tioca_tlbflush - invalidate cached SGI CA GART TLB entries + * @tioca_kernel: CA context + * + * Invalidate tlb entries for a given CA GART. Main complexity is to account + * for revA bug. + */ +static inline void +tioca_tlbflush(struct tioca_kernel *tioca_kernel) +{ + volatile u64 tmp; + volatile struct tioca __iomem *ca_base; + struct tioca_common *tioca_common; + + tioca_common = tioca_kernel->ca_common; + ca_base = (struct tioca __iomem *)tioca_common->ca_common.bs_base; + + /* + * Explicit flushes not needed if GART is in cached mode + */ + if (tioca_kernel->ca_gart_iscoherent) { + if (TIOCA_WAR_ENABLED(PV910244, tioca_common)) { + /* + * PV910244: RevA CA needs explicit flushes. + * Need to put GART into uncached mode before + * flushing otherwise the explicit flush is ignored. + * + * Alternate WAR would be to leave GART cached and + * touch every CL aligned GART entry. + */ + + __sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM); + __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB); + __sn_setq_relaxed(&ca_base->ca_control2, + (0x2ull << CA_GART_MEM_PARAM_SHFT)); + tmp = __sn_readq_relaxed(&ca_base->ca_control2); + } + + return; + } + + /* + * Gart in uncached mode ... need an explicit flush. + */ + + __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB); + tmp = __sn_readq_relaxed(&ca_base->ca_control2); +} + +extern u32 tioca_gart_found; +extern struct list_head tioca_list; +extern int tioca_init_provider(void); +extern void tioca_fastwrite_enable(struct tioca_kernel *tioca_kern); +#endif /* _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H */ diff --git a/arch/ia64/include/asm/sn/tioce.h b/arch/ia64/include/asm/sn/tioce.h new file mode 100644 index 00000000000..893468e1b41 --- /dev/null +++ b/arch/ia64/include/asm/sn/tioce.h @@ -0,0 +1,760 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef __ASM_IA64_SN_TIOCE_H__ +#define __ASM_IA64_SN_TIOCE_H__ + +/* CE ASIC part & mfgr information */ +#define TIOCE_PART_NUM 0xCE00 +#define TIOCE_SRC_ID 0x01 +#define TIOCE_REV_A 0x1 + +/* CE Virtual PPB Vendor/Device IDs */ +#define CE_VIRT_PPB_VENDOR_ID 0x10a9 +#define CE_VIRT_PPB_DEVICE_ID 0x4002 + +/* CE Host Bridge Vendor/Device IDs */ +#define CE_HOST_BRIDGE_VENDOR_ID 0x10a9 +#define CE_HOST_BRIDGE_DEVICE_ID 0x4001 + + +#define TIOCE_NUM_M40_ATES 4096 +#define TIOCE_NUM_M3240_ATES 2048 +#define TIOCE_NUM_PORTS 2 + +/* + * Register layout for TIOCE. MMR offsets are shown at the far right of the + * structure definition. + */ +typedef volatile struct tioce { + /* + * ADMIN : Administration Registers + */ + u64 ce_adm_id; /* 0x000000 */ + u64 ce_pad_000008; /* 0x000008 */ + u64 ce_adm_dyn_credit_status; /* 0x000010 */ + u64 ce_adm_last_credit_status; /* 0x000018 */ + u64 ce_adm_credit_limit; /* 0x000020 */ + u64 ce_adm_force_credit; /* 0x000028 */ + u64 ce_adm_control; /* 0x000030 */ + u64 ce_adm_mmr_chn_timeout; /* 0x000038 */ + u64 ce_adm_ssp_ure_timeout; /* 0x000040 */ + u64 ce_adm_ssp_dre_timeout; /* 0x000048 */ + u64 ce_adm_ssp_debug_sel; /* 0x000050 */ + u64 ce_adm_int_status; /* 0x000058 */ + u64 ce_adm_int_status_alias; /* 0x000060 */ + u64 ce_adm_int_mask; /* 0x000068 */ + u64 ce_adm_int_pending; /* 0x000070 */ + u64 ce_adm_force_int; /* 0x000078 */ + u64 ce_adm_ure_ups_buf_barrier_flush; /* 0x000080 */ + u64 ce_adm_int_dest[15]; /* 0x000088 -- 0x0000F8 */ + u64 ce_adm_error_summary; /* 0x000100 */ + u64 ce_adm_error_summary_alias; /* 0x000108 */ + u64 ce_adm_error_mask; /* 0x000110 */ + u64 ce_adm_first_error; /* 0x000118 */ + u64 ce_adm_error_overflow; /* 0x000120 */ + u64 ce_adm_error_overflow_alias; /* 0x000128 */ + u64 ce_pad_000130[2]; /* 0x000130 -- 0x000138 */ + u64 ce_adm_tnum_error; /* 0x000140 */ + u64 ce_adm_mmr_err_detail; /* 0x000148 */ + u64 ce_adm_msg_sram_perr_detail; /* 0x000150 */ + u64 ce_adm_bap_sram_perr_detail; /* 0x000158 */ + u64 ce_adm_ce_sram_perr_detail; /* 0x000160 */ + u64 ce_adm_ce_credit_oflow_detail; /* 0x000168 */ + u64 ce_adm_tx_link_idle_max_timer; /* 0x000170 */ + u64 ce_adm_pcie_debug_sel; /* 0x000178 */ + u64 ce_pad_000180[16]; /* 0x000180 -- 0x0001F8 */ + + u64 ce_adm_pcie_debug_sel_top; /* 0x000200 */ + u64 ce_adm_pcie_debug_lat_sel_lo_top; /* 0x000208 */ + u64 ce_adm_pcie_debug_lat_sel_hi_top; /* 0x000210 */ + u64 ce_adm_pcie_debug_trig_sel_top; /* 0x000218 */ + u64 ce_adm_pcie_debug_trig_lat_sel_lo_top; /* 0x000220 */ + u64 ce_adm_pcie_debug_trig_lat_sel_hi_top; /* 0x000228 */ + u64 ce_adm_pcie_trig_compare_top; /* 0x000230 */ + u64 ce_adm_pcie_trig_compare_en_top; /* 0x000238 */ + u64 ce_adm_ssp_debug_sel_top; /* 0x000240 */ + u64 ce_adm_ssp_debug_lat_sel_lo_top; /* 0x000248 */ + u64 ce_adm_ssp_debug_lat_sel_hi_top; /* 0x000250 */ + u64 ce_adm_ssp_debug_trig_sel_top; /* 0x000258 */ + u64 ce_adm_ssp_debug_trig_lat_sel_lo_top; /* 0x000260 */ + u64 ce_adm_ssp_debug_trig_lat_sel_hi_top; /* 0x000268 */ + u64 ce_adm_ssp_trig_compare_top; /* 0x000270 */ + u64 ce_adm_ssp_trig_compare_en_top; /* 0x000278 */ + u64 ce_pad_000280[48]; /* 0x000280 -- 0x0003F8 */ + + u64 ce_adm_bap_ctrl; /* 0x000400 */ + u64 ce_pad_000408[127]; /* 0x000408 -- 0x0007F8 */ + + u64 ce_msg_buf_data63_0[35]; /* 0x000800 -- 0x000918 */ + u64 ce_pad_000920[29]; /* 0x000920 -- 0x0009F8 */ + + u64 ce_msg_buf_data127_64[35]; /* 0x000A00 -- 0x000B18 */ + u64 ce_pad_000B20[29]; /* 0x000B20 -- 0x000BF8 */ + + u64 ce_msg_buf_parity[35]; /* 0x000C00 -- 0x000D18 */ + u64 ce_pad_000D20[29]; /* 0x000D20 -- 0x000DF8 */ + + u64 ce_pad_000E00[576]; /* 0x000E00 -- 0x001FF8 */ + + /* + * LSI : LSI's PCI Express Link Registers (Link#1 and Link#2) + * Link#1 MMRs at start at 0x002000, Link#2 MMRs at 0x003000 + * NOTE: the comment offsets at far right: let 'z' = {2 or 3} + */ + #define ce_lsi(link_num) ce_lsi[link_num-1] + struct ce_lsi_reg { + u64 ce_lsi_lpu_id; /* 0x00z000 */ + u64 ce_lsi_rst; /* 0x00z008 */ + u64 ce_lsi_dbg_stat; /* 0x00z010 */ + u64 ce_lsi_dbg_cfg; /* 0x00z018 */ + u64 ce_lsi_ltssm_ctrl; /* 0x00z020 */ + u64 ce_lsi_lk_stat; /* 0x00z028 */ + u64 ce_pad_00z030[2]; /* 0x00z030 -- 0x00z038 */ + u64 ce_lsi_int_and_stat; /* 0x00z040 */ + u64 ce_lsi_int_mask; /* 0x00z048 */ + u64 ce_pad_00z050[22]; /* 0x00z050 -- 0x00z0F8 */ + u64 ce_lsi_lk_perf_cnt_sel; /* 0x00z100 */ + u64 ce_pad_00z108; /* 0x00z108 */ + u64 ce_lsi_lk_perf_cnt_ctrl; /* 0x00z110 */ + u64 ce_pad_00z118; /* 0x00z118 */ + u64 ce_lsi_lk_perf_cnt1; /* 0x00z120 */ + u64 ce_lsi_lk_perf_cnt1_test; /* 0x00z128 */ + u64 ce_lsi_lk_perf_cnt2; /* 0x00z130 */ + u64 ce_lsi_lk_perf_cnt2_test; /* 0x00z138 */ + u64 ce_pad_00z140[24]; /* 0x00z140 -- 0x00z1F8 */ + u64 ce_lsi_lk_lyr_cfg; /* 0x00z200 */ + u64 ce_lsi_lk_lyr_status; /* 0x00z208 */ + u64 ce_lsi_lk_lyr_int_stat; /* 0x00z210 */ + u64 ce_lsi_lk_ly_int_stat_test; /* 0x00z218 */ + u64 ce_lsi_lk_ly_int_stat_mask; /* 0x00z220 */ + u64 ce_pad_00z228[3]; /* 0x00z228 -- 0x00z238 */ + u64 ce_lsi_fc_upd_ctl; /* 0x00z240 */ + u64 ce_pad_00z248[3]; /* 0x00z248 -- 0x00z258 */ + u64 ce_lsi_flw_ctl_upd_to_timer; /* 0x00z260 */ + u64 ce_lsi_flw_ctl_upd_timer0; /* 0x00z268 */ + u64 ce_lsi_flw_ctl_upd_timer1; /* 0x00z270 */ + u64 ce_pad_00z278[49]; /* 0x00z278 -- 0x00z3F8 */ + u64 ce_lsi_freq_nak_lat_thrsh; /* 0x00z400 */ + u64 ce_lsi_ack_nak_lat_tmr; /* 0x00z408 */ + u64 ce_lsi_rply_tmr_thr; /* 0x00z410 */ + u64 ce_lsi_rply_tmr; /* 0x00z418 */ + u64 ce_lsi_rply_num_stat; /* 0x00z420 */ + u64 ce_lsi_rty_buf_max_addr; /* 0x00z428 */ + u64 ce_lsi_rty_fifo_ptr; /* 0x00z430 */ + u64 ce_lsi_rty_fifo_rd_wr_ptr; /* 0x00z438 */ + u64 ce_lsi_rty_fifo_cred; /* 0x00z440 */ + u64 ce_lsi_seq_cnt; /* 0x00z448 */ + u64 ce_lsi_ack_sent_seq_num; /* 0x00z450 */ + u64 ce_lsi_seq_cnt_fifo_max_addr; /* 0x00z458 */ + u64 ce_lsi_seq_cnt_fifo_ptr; /* 0x00z460 */ + u64 ce_lsi_seq_cnt_rd_wr_ptr; /* 0x00z468 */ + u64 ce_lsi_tx_lk_ts_ctl; /* 0x00z470 */ + u64 ce_pad_00z478; /* 0x00z478 */ + u64 ce_lsi_mem_addr_ctl; /* 0x00z480 */ + u64 ce_lsi_mem_d_ld0; /* 0x00z488 */ + u64 ce_lsi_mem_d_ld1; /* 0x00z490 */ + u64 ce_lsi_mem_d_ld2; /* 0x00z498 */ + u64 ce_lsi_mem_d_ld3; /* 0x00z4A0 */ + u64 ce_lsi_mem_d_ld4; /* 0x00z4A8 */ + u64 ce_pad_00z4B0[2]; /* 0x00z4B0 -- 0x00z4B8 */ + u64 ce_lsi_rty_d_cnt; /* 0x00z4C0 */ + u64 ce_lsi_seq_buf_cnt; /* 0x00z4C8 */ + u64 ce_lsi_seq_buf_bt_d; /* 0x00z4D0 */ + u64 ce_pad_00z4D8; /* 0x00z4D8 */ + u64 ce_lsi_ack_lat_thr; /* 0x00z4E0 */ + u64 ce_pad_00z4E8[3]; /* 0x00z4E8 -- 0x00z4F8 */ + u64 ce_lsi_nxt_rcv_seq_1_cntr; /* 0x00z500 */ + u64 ce_lsi_unsp_dllp_rcvd; /* 0x00z508 */ + u64 ce_lsi_rcv_lk_ts_ctl; /* 0x00z510 */ + u64 ce_pad_00z518[29]; /* 0x00z518 -- 0x00z5F8 */ + u64 ce_lsi_phy_lyr_cfg; /* 0x00z600 */ + u64 ce_pad_00z608; /* 0x00z608 */ + u64 ce_lsi_phy_lyr_int_stat; /* 0x00z610 */ + u64 ce_lsi_phy_lyr_int_stat_test; /* 0x00z618 */ + u64 ce_lsi_phy_lyr_int_mask; /* 0x00z620 */ + u64 ce_pad_00z628[11]; /* 0x00z628 -- 0x00z678 */ + u64 ce_lsi_rcv_phy_cfg; /* 0x00z680 */ + u64 ce_lsi_rcv_phy_stat1; /* 0x00z688 */ + u64 ce_lsi_rcv_phy_stat2; /* 0x00z690 */ + u64 ce_lsi_rcv_phy_stat3; /* 0x00z698 */ + u64 ce_lsi_rcv_phy_int_stat; /* 0x00z6A0 */ + u64 ce_lsi_rcv_phy_int_stat_test; /* 0x00z6A8 */ + u64 ce_lsi_rcv_phy_int_mask; /* 0x00z6B0 */ + u64 ce_pad_00z6B8[9]; /* 0x00z6B8 -- 0x00z6F8 */ + u64 ce_lsi_tx_phy_cfg; /* 0x00z700 */ + u64 ce_lsi_tx_phy_stat; /* 0x00z708 */ + u64 ce_lsi_tx_phy_int_stat; /* 0x00z710 */ + u64 ce_lsi_tx_phy_int_stat_test; /* 0x00z718 */ + u64 ce_lsi_tx_phy_int_mask; /* 0x00z720 */ + u64 ce_lsi_tx_phy_stat2; /* 0x00z728 */ + u64 ce_pad_00z730[10]; /* 0x00z730 -- 0x00z77F */ + u64 ce_lsi_ltssm_cfg1; /* 0x00z780 */ + u64 ce_lsi_ltssm_cfg2; /* 0x00z788 */ + u64 ce_lsi_ltssm_cfg3; /* 0x00z790 */ + u64 ce_lsi_ltssm_cfg4; /* 0x00z798 */ + u64 ce_lsi_ltssm_cfg5; /* 0x00z7A0 */ + u64 ce_lsi_ltssm_stat1; /* 0x00z7A8 */ + u64 ce_lsi_ltssm_stat2; /* 0x00z7B0 */ + u64 ce_lsi_ltssm_int_stat; /* 0x00z7B8 */ + u64 ce_lsi_ltssm_int_stat_test; /* 0x00z7C0 */ + u64 ce_lsi_ltssm_int_mask; /* 0x00z7C8 */ + u64 ce_lsi_ltssm_stat_wr_en; /* 0x00z7D0 */ + u64 ce_pad_00z7D8[5]; /* 0x00z7D8 -- 0x00z7F8 */ + u64 ce_lsi_gb_cfg1; /* 0x00z800 */ + u64 ce_lsi_gb_cfg2; /* 0x00z808 */ + u64 ce_lsi_gb_cfg3; /* 0x00z810 */ + u64 ce_lsi_gb_cfg4; /* 0x00z818 */ + u64 ce_lsi_gb_stat; /* 0x00z820 */ + u64 ce_lsi_gb_int_stat; /* 0x00z828 */ + u64 ce_lsi_gb_int_stat_test; /* 0x00z830 */ + u64 ce_lsi_gb_int_mask; /* 0x00z838 */ + u64 ce_lsi_gb_pwr_dn1; /* 0x00z840 */ + u64 ce_lsi_gb_pwr_dn2; /* 0x00z848 */ + u64 ce_pad_00z850[246]; /* 0x00z850 -- 0x00zFF8 */ + } ce_lsi[2]; + + u64 ce_pad_004000[10]; /* 0x004000 -- 0x004048 */ + + /* + * CRM: Coretalk Receive Module Registers + */ + u64 ce_crm_debug_mux; /* 0x004050 */ + u64 ce_pad_004058; /* 0x004058 */ + u64 ce_crm_ssp_err_cmd_wrd; /* 0x004060 */ + u64 ce_crm_ssp_err_addr; /* 0x004068 */ + u64 ce_crm_ssp_err_syn; /* 0x004070 */ + + u64 ce_pad_004078[499]; /* 0x004078 -- 0x005008 */ + + /* + * CXM: Coretalk Xmit Module Registers + */ + u64 ce_cxm_dyn_credit_status; /* 0x005010 */ + u64 ce_cxm_last_credit_status; /* 0x005018 */ + u64 ce_cxm_credit_limit; /* 0x005020 */ + u64 ce_cxm_force_credit; /* 0x005028 */ + u64 ce_cxm_disable_bypass; /* 0x005030 */ + u64 ce_pad_005038[3]; /* 0x005038 -- 0x005048 */ + u64 ce_cxm_debug_mux; /* 0x005050 */ + + u64 ce_pad_005058[501]; /* 0x005058 -- 0x005FF8 */ + + /* + * DTL: Downstream Transaction Layer Regs (Link#1 and Link#2) + * DTL: Link#1 MMRs at start at 0x006000, Link#2 MMRs at 0x008000 + * DTL: the comment offsets at far right: let 'y' = {6 or 8} + * + * UTL: Downstream Transaction Layer Regs (Link#1 and Link#2) + * UTL: Link#1 MMRs at start at 0x007000, Link#2 MMRs at 0x009000 + * UTL: the comment offsets at far right: let 'z' = {7 or 9} + */ + #define ce_dtl(link_num) ce_dtl_utl[link_num-1] + #define ce_utl(link_num) ce_dtl_utl[link_num-1] + struct ce_dtl_utl_reg { + /* DTL */ + u64 ce_dtl_dtdr_credit_limit; /* 0x00y000 */ + u64 ce_dtl_dtdr_credit_force; /* 0x00y008 */ + u64 ce_dtl_dyn_credit_status; /* 0x00y010 */ + u64 ce_dtl_dtl_last_credit_stat; /* 0x00y018 */ + u64 ce_dtl_dtl_ctrl; /* 0x00y020 */ + u64 ce_pad_00y028[5]; /* 0x00y028 -- 0x00y048 */ + u64 ce_dtl_debug_sel; /* 0x00y050 */ + u64 ce_pad_00y058[501]; /* 0x00y058 -- 0x00yFF8 */ + + /* UTL */ + u64 ce_utl_utl_ctrl; /* 0x00z000 */ + u64 ce_utl_debug_sel; /* 0x00z008 */ + u64 ce_pad_00z010[510]; /* 0x00z010 -- 0x00zFF8 */ + } ce_dtl_utl[2]; + + u64 ce_pad_00A000[514]; /* 0x00A000 -- 0x00B008 */ + + /* + * URE: Upstream Request Engine + */ + u64 ce_ure_dyn_credit_status; /* 0x00B010 */ + u64 ce_ure_last_credit_status; /* 0x00B018 */ + u64 ce_ure_credit_limit; /* 0x00B020 */ + u64 ce_pad_00B028; /* 0x00B028 */ + u64 ce_ure_control; /* 0x00B030 */ + u64 ce_ure_status; /* 0x00B038 */ + u64 ce_pad_00B040[2]; /* 0x00B040 -- 0x00B048 */ + u64 ce_ure_debug_sel; /* 0x00B050 */ + u64 ce_ure_pcie_debug_sel; /* 0x00B058 */ + u64 ce_ure_ssp_err_cmd_wrd; /* 0x00B060 */ + u64 ce_ure_ssp_err_addr; /* 0x00B068 */ + u64 ce_ure_page_map; /* 0x00B070 */ + u64 ce_ure_dir_map[TIOCE_NUM_PORTS]; /* 0x00B078 */ + u64 ce_ure_pipe_sel1; /* 0x00B088 */ + u64 ce_ure_pipe_mask1; /* 0x00B090 */ + u64 ce_ure_pipe_sel2; /* 0x00B098 */ + u64 ce_ure_pipe_mask2; /* 0x00B0A0 */ + u64 ce_ure_pcie1_credits_sent; /* 0x00B0A8 */ + u64 ce_ure_pcie1_credits_used; /* 0x00B0B0 */ + u64 ce_ure_pcie1_credit_limit; /* 0x00B0B8 */ + u64 ce_ure_pcie2_credits_sent; /* 0x00B0C0 */ + u64 ce_ure_pcie2_credits_used; /* 0x00B0C8 */ + u64 ce_ure_pcie2_credit_limit; /* 0x00B0D0 */ + u64 ce_ure_pcie_force_credit; /* 0x00B0D8 */ + u64 ce_ure_rd_tnum_val; /* 0x00B0E0 */ + u64 ce_ure_rd_tnum_rsp_rcvd; /* 0x00B0E8 */ + u64 ce_ure_rd_tnum_esent_timer; /* 0x00B0F0 */ + u64 ce_ure_rd_tnum_error; /* 0x00B0F8 */ + u64 ce_ure_rd_tnum_first_cl; /* 0x00B100 */ + u64 ce_ure_rd_tnum_link_buf; /* 0x00B108 */ + u64 ce_ure_wr_tnum_val; /* 0x00B110 */ + u64 ce_ure_sram_err_addr0; /* 0x00B118 */ + u64 ce_ure_sram_err_addr1; /* 0x00B120 */ + u64 ce_ure_sram_err_addr2; /* 0x00B128 */ + u64 ce_ure_sram_rd_addr0; /* 0x00B130 */ + u64 ce_ure_sram_rd_addr1; /* 0x00B138 */ + u64 ce_ure_sram_rd_addr2; /* 0x00B140 */ + u64 ce_ure_sram_wr_addr0; /* 0x00B148 */ + u64 ce_ure_sram_wr_addr1; /* 0x00B150 */ + u64 ce_ure_sram_wr_addr2; /* 0x00B158 */ + u64 ce_ure_buf_flush10; /* 0x00B160 */ + u64 ce_ure_buf_flush11; /* 0x00B168 */ + u64 ce_ure_buf_flush12; /* 0x00B170 */ + u64 ce_ure_buf_flush13; /* 0x00B178 */ + u64 ce_ure_buf_flush20; /* 0x00B180 */ + u64 ce_ure_buf_flush21; /* 0x00B188 */ + u64 ce_ure_buf_flush22; /* 0x00B190 */ + u64 ce_ure_buf_flush23; /* 0x00B198 */ + u64 ce_ure_pcie_control1; /* 0x00B1A0 */ + u64 ce_ure_pcie_control2; /* 0x00B1A8 */ + + u64 ce_pad_00B1B0[458]; /* 0x00B1B0 -- 0x00BFF8 */ + + /* Upstream Data Buffer, Port1 */ + struct ce_ure_maint_ups_dat1_data { + u64 data63_0[512]; /* 0x00C000 -- 0x00CFF8 */ + u64 data127_64[512]; /* 0x00D000 -- 0x00DFF8 */ + u64 parity[512]; /* 0x00E000 -- 0x00EFF8 */ + } ce_ure_maint_ups_dat1; + + /* Upstream Header Buffer, Port1 */ + struct ce_ure_maint_ups_hdr1_data { + u64 data63_0[512]; /* 0x00F000 -- 0x00FFF8 */ + u64 data127_64[512]; /* 0x010000 -- 0x010FF8 */ + u64 parity[512]; /* 0x011000 -- 0x011FF8 */ + } ce_ure_maint_ups_hdr1; + + /* Upstream Data Buffer, Port2 */ + struct ce_ure_maint_ups_dat2_data { + u64 data63_0[512]; /* 0x012000 -- 0x012FF8 */ + u64 data127_64[512]; /* 0x013000 -- 0x013FF8 */ + u64 parity[512]; /* 0x014000 -- 0x014FF8 */ + } ce_ure_maint_ups_dat2; + + /* Upstream Header Buffer, Port2 */ + struct ce_ure_maint_ups_hdr2_data { + u64 data63_0[512]; /* 0x015000 -- 0x015FF8 */ + u64 data127_64[512]; /* 0x016000 -- 0x016FF8 */ + u64 parity[512]; /* 0x017000 -- 0x017FF8 */ + } ce_ure_maint_ups_hdr2; + + /* Downstream Data Buffer */ + struct ce_ure_maint_dns_dat_data { + u64 data63_0[512]; /* 0x018000 -- 0x018FF8 */ + u64 data127_64[512]; /* 0x019000 -- 0x019FF8 */ + u64 parity[512]; /* 0x01A000 -- 0x01AFF8 */ + } ce_ure_maint_dns_dat; + + /* Downstream Header Buffer */ + struct ce_ure_maint_dns_hdr_data { + u64 data31_0[64]; /* 0x01B000 -- 0x01B1F8 */ + u64 data95_32[64]; /* 0x01B200 -- 0x01B3F8 */ + u64 parity[64]; /* 0x01B400 -- 0x01B5F8 */ + } ce_ure_maint_dns_hdr; + + /* RCI Buffer Data */ + struct ce_ure_maint_rci_data { + u64 data41_0[64]; /* 0x01B600 -- 0x01B7F8 */ + u64 data69_42[64]; /* 0x01B800 -- 0x01B9F8 */ + } ce_ure_maint_rci; + + /* Response Queue */ + u64 ce_ure_maint_rspq[64]; /* 0x01BA00 -- 0x01BBF8 */ + + u64 ce_pad_01C000[4224]; /* 0x01BC00 -- 0x023FF8 */ + + /* Admin Build-a-Packet Buffer */ + struct ce_adm_maint_bap_buf_data { + u64 data63_0[258]; /* 0x024000 -- 0x024808 */ + u64 data127_64[258]; /* 0x024810 -- 0x025018 */ + u64 parity[258]; /* 0x025020 -- 0x025828 */ + } ce_adm_maint_bap_buf; + + u64 ce_pad_025830[5370]; /* 0x025830 -- 0x02FFF8 */ + + /* URE: 40bit PMU ATE Buffer */ /* 0x030000 -- 0x037FF8 */ + u64 ce_ure_ate40[TIOCE_NUM_M40_ATES]; + + /* URE: 32/40bit PMU ATE Buffer */ /* 0x038000 -- 0x03BFF8 */ + u64 ce_ure_ate3240[TIOCE_NUM_M3240_ATES]; + + u64 ce_pad_03C000[2050]; /* 0x03C000 -- 0x040008 */ + + /* + * DRE: Down Stream Request Engine + */ + u64 ce_dre_dyn_credit_status1; /* 0x040010 */ + u64 ce_dre_dyn_credit_status2; /* 0x040018 */ + u64 ce_dre_last_credit_status1; /* 0x040020 */ + u64 ce_dre_last_credit_status2; /* 0x040028 */ + u64 ce_dre_credit_limit1; /* 0x040030 */ + u64 ce_dre_credit_limit2; /* 0x040038 */ + u64 ce_dre_force_credit1; /* 0x040040 */ + u64 ce_dre_force_credit2; /* 0x040048 */ + u64 ce_dre_debug_mux1; /* 0x040050 */ + u64 ce_dre_debug_mux2; /* 0x040058 */ + u64 ce_dre_ssp_err_cmd_wrd; /* 0x040060 */ + u64 ce_dre_ssp_err_addr; /* 0x040068 */ + u64 ce_dre_comp_err_cmd_wrd; /* 0x040070 */ + u64 ce_dre_comp_err_addr; /* 0x040078 */ + u64 ce_dre_req_status; /* 0x040080 */ + u64 ce_dre_config1; /* 0x040088 */ + u64 ce_dre_config2; /* 0x040090 */ + u64 ce_dre_config_req_status; /* 0x040098 */ + u64 ce_pad_0400A0[12]; /* 0x0400A0 -- 0x0400F8 */ + u64 ce_dre_dyn_fifo; /* 0x040100 */ + u64 ce_pad_040108[3]; /* 0x040108 -- 0x040118 */ + u64 ce_dre_last_fifo; /* 0x040120 */ + + u64 ce_pad_040128[27]; /* 0x040128 -- 0x0401F8 */ + + /* DRE Downstream Head Queue */ + struct ce_dre_maint_ds_head_queue { + u64 data63_0[32]; /* 0x040200 -- 0x0402F8 */ + u64 data127_64[32]; /* 0x040300 -- 0x0403F8 */ + u64 parity[32]; /* 0x040400 -- 0x0404F8 */ + } ce_dre_maint_ds_head_q; + + u64 ce_pad_040500[352]; /* 0x040500 -- 0x040FF8 */ + + /* DRE Downstream Data Queue */ + struct ce_dre_maint_ds_data_queue { + u64 data63_0[256]; /* 0x041000 -- 0x0417F8 */ + u64 ce_pad_041800[256]; /* 0x041800 -- 0x041FF8 */ + u64 data127_64[256]; /* 0x042000 -- 0x0427F8 */ + u64 ce_pad_042800[256]; /* 0x042800 -- 0x042FF8 */ + u64 parity[256]; /* 0x043000 -- 0x0437F8 */ + u64 ce_pad_043800[256]; /* 0x043800 -- 0x043FF8 */ + } ce_dre_maint_ds_data_q; + + /* DRE URE Upstream Response Queue */ + struct ce_dre_maint_ure_us_rsp_queue { + u64 data63_0[8]; /* 0x044000 -- 0x044038 */ + u64 ce_pad_044040[24]; /* 0x044040 -- 0x0440F8 */ + u64 data127_64[8]; /* 0x044100 -- 0x044138 */ + u64 ce_pad_044140[24]; /* 0x044140 -- 0x0441F8 */ + u64 parity[8]; /* 0x044200 -- 0x044238 */ + u64 ce_pad_044240[24]; /* 0x044240 -- 0x0442F8 */ + } ce_dre_maint_ure_us_rsp_q; + + u64 ce_dre_maint_us_wrt_rsp[32];/* 0x044300 -- 0x0443F8 */ + + u64 ce_end_of_struct; /* 0x044400 */ +} tioce_t; + +/* ce_lsiX_gb_cfg1 register bit masks & shifts */ +#define CE_LSI_GB_CFG1_RXL0S_THS_SHFT 0 +#define CE_LSI_GB_CFG1_RXL0S_THS_MASK (0xffULL << 0) +#define CE_LSI_GB_CFG1_RXL0S_SMP_SHFT 8 +#define CE_LSI_GB_CFG1_RXL0S_SMP_MASK (0xfULL << 8); +#define CE_LSI_GB_CFG1_RXL0S_ADJ_SHFT 12 +#define CE_LSI_GB_CFG1_RXL0S_ADJ_MASK (0x7ULL << 12) +#define CE_LSI_GB_CFG1_RXL0S_FLT_SHFT 15 +#define CE_LSI_GB_CFG1_RXL0S_FLT_MASK (0x1ULL << 15) +#define CE_LSI_GB_CFG1_LPBK_SEL_SHFT 16 +#define CE_LSI_GB_CFG1_LPBK_SEL_MASK (0x3ULL << 16) +#define CE_LSI_GB_CFG1_LPBK_EN_SHFT 18 +#define CE_LSI_GB_CFG1_LPBK_EN_MASK (0x1ULL << 18) +#define CE_LSI_GB_CFG1_RVRS_LB_SHFT 19 +#define CE_LSI_GB_CFG1_RVRS_LB_MASK (0x1ULL << 19) +#define CE_LSI_GB_CFG1_RVRS_CLK_SHFT 20 +#define CE_LSI_GB_CFG1_RVRS_CLK_MASK (0x3ULL << 20) +#define CE_LSI_GB_CFG1_SLF_TS_SHFT 24 +#define CE_LSI_GB_CFG1_SLF_TS_MASK (0xfULL << 24) + +/* ce_adm_int_mask/ce_adm_int_status register bit defines */ +#define CE_ADM_INT_CE_ERROR_SHFT 0 +#define CE_ADM_INT_LSI1_IP_ERROR_SHFT 1 +#define CE_ADM_INT_LSI2_IP_ERROR_SHFT 2 +#define CE_ADM_INT_PCIE_ERROR_SHFT 3 +#define CE_ADM_INT_PORT1_HOTPLUG_EVENT_SHFT 4 +#define CE_ADM_INT_PORT2_HOTPLUG_EVENT_SHFT 5 +#define CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT 6 +#define CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT 7 +#define CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT 8 +#define CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT 9 +#define CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT 10 +#define CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT 11 +#define CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT 12 +#define CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT 13 +#define CE_ADM_INT_PCIE_MSG_SHFT 14 /*see int_dest_14*/ +#define CE_ADM_INT_PCIE_MSG_SLOT_0_SHFT 14 +#define CE_ADM_INT_PCIE_MSG_SLOT_1_SHFT 15 +#define CE_ADM_INT_PCIE_MSG_SLOT_2_SHFT 16 +#define CE_ADM_INT_PCIE_MSG_SLOT_3_SHFT 17 +#define CE_ADM_INT_PORT1_PM_PME_MSG_SHFT 22 +#define CE_ADM_INT_PORT2_PM_PME_MSG_SHFT 23 + +/* ce_adm_force_int register bit defines */ +#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT 0 +#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT 1 +#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT 2 +#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT 3 +#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT 4 +#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT 5 +#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT 6 +#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT 7 +#define CE_ADM_FORCE_INT_ALWAYS_SHFT 8 + +/* ce_adm_int_dest register bit masks & shifts */ +#define INTR_VECTOR_SHFT 56 + +/* ce_adm_error_mask and ce_adm_error_summary register bit masks */ +#define CE_ADM_ERR_CRM_SSP_REQ_INVALID (0x1ULL << 0) +#define CE_ADM_ERR_SSP_REQ_HEADER (0x1ULL << 1) +#define CE_ADM_ERR_SSP_RSP_HEADER (0x1ULL << 2) +#define CE_ADM_ERR_SSP_PROTOCOL_ERROR (0x1ULL << 3) +#define CE_ADM_ERR_SSP_SBE (0x1ULL << 4) +#define CE_ADM_ERR_SSP_MBE (0x1ULL << 5) +#define CE_ADM_ERR_CXM_CREDIT_OFLOW (0x1ULL << 6) +#define CE_ADM_ERR_DRE_SSP_REQ_INVAL (0x1ULL << 7) +#define CE_ADM_ERR_SSP_REQ_LONG (0x1ULL << 8) +#define CE_ADM_ERR_SSP_REQ_OFLOW (0x1ULL << 9) +#define CE_ADM_ERR_SSP_REQ_SHORT (0x1ULL << 10) +#define CE_ADM_ERR_SSP_REQ_SIDEBAND (0x1ULL << 11) +#define CE_ADM_ERR_SSP_REQ_ADDR_ERR (0x1ULL << 12) +#define CE_ADM_ERR_SSP_REQ_BAD_BE (0x1ULL << 13) +#define CE_ADM_ERR_PCIE_COMPL_TIMEOUT (0x1ULL << 14) +#define CE_ADM_ERR_PCIE_UNEXP_COMPL (0x1ULL << 15) +#define CE_ADM_ERR_PCIE_ERR_COMPL (0x1ULL << 16) +#define CE_ADM_ERR_DRE_CREDIT_OFLOW (0x1ULL << 17) +#define CE_ADM_ERR_DRE_SRAM_PE (0x1ULL << 18) +#define CE_ADM_ERR_SSP_RSP_INVALID (0x1ULL << 19) +#define CE_ADM_ERR_SSP_RSP_LONG (0x1ULL << 20) +#define CE_ADM_ERR_SSP_RSP_SHORT (0x1ULL << 21) +#define CE_ADM_ERR_SSP_RSP_SIDEBAND (0x1ULL << 22) +#define CE_ADM_ERR_URE_SSP_RSP_UNEXP (0x1ULL << 23) +#define CE_ADM_ERR_URE_SSP_WR_REQ_TIMEOUT (0x1ULL << 24) +#define CE_ADM_ERR_URE_SSP_RD_REQ_TIMEOUT (0x1ULL << 25) +#define CE_ADM_ERR_URE_ATE3240_PAGE_FAULT (0x1ULL << 26) +#define CE_ADM_ERR_URE_ATE40_PAGE_FAULT (0x1ULL << 27) +#define CE_ADM_ERR_URE_CREDIT_OFLOW (0x1ULL << 28) +#define CE_ADM_ERR_URE_SRAM_PE (0x1ULL << 29) +#define CE_ADM_ERR_ADM_SSP_RSP_UNEXP (0x1ULL << 30) +#define CE_ADM_ERR_ADM_SSP_REQ_TIMEOUT (0x1ULL << 31) +#define CE_ADM_ERR_MMR_ACCESS_ERROR (0x1ULL << 32) +#define CE_ADM_ERR_MMR_ADDR_ERROR (0x1ULL << 33) +#define CE_ADM_ERR_ADM_CREDIT_OFLOW (0x1ULL << 34) +#define CE_ADM_ERR_ADM_SRAM_PE (0x1ULL << 35) +#define CE_ADM_ERR_DTL1_MIN_PDATA_CREDIT_ERR (0x1ULL << 36) +#define CE_ADM_ERR_DTL1_INF_COMPL_CRED_UPDT_ERR (0x1ULL << 37) +#define CE_ADM_ERR_DTL1_INF_POSTED_CRED_UPDT_ERR (0x1ULL << 38) +#define CE_ADM_ERR_DTL1_INF_NPOSTED_CRED_UPDT_ERR (0x1ULL << 39) +#define CE_ADM_ERR_DTL1_COMP_HD_CRED_MAX_ERR (0x1ULL << 40) +#define CE_ADM_ERR_DTL1_COMP_D_CRED_MAX_ERR (0x1ULL << 41) +#define CE_ADM_ERR_DTL1_NPOSTED_HD_CRED_MAX_ERR (0x1ULL << 42) +#define CE_ADM_ERR_DTL1_NPOSTED_D_CRED_MAX_ERR (0x1ULL << 43) +#define CE_ADM_ERR_DTL1_POSTED_HD_CRED_MAX_ERR (0x1ULL << 44) +#define CE_ADM_ERR_DTL1_POSTED_D_CRED_MAX_ERR (0x1ULL << 45) +#define CE_ADM_ERR_DTL2_MIN_PDATA_CREDIT_ERR (0x1ULL << 46) +#define CE_ADM_ERR_DTL2_INF_COMPL_CRED_UPDT_ERR (0x1ULL << 47) +#define CE_ADM_ERR_DTL2_INF_POSTED_CRED_UPDT_ERR (0x1ULL << 48) +#define CE_ADM_ERR_DTL2_INF_NPOSTED_CRED_UPDT_ERR (0x1ULL << 49) +#define CE_ADM_ERR_DTL2_COMP_HD_CRED_MAX_ERR (0x1ULL << 50) +#define CE_ADM_ERR_DTL2_COMP_D_CRED_MAX_ERR (0x1ULL << 51) +#define CE_ADM_ERR_DTL2_NPOSTED_HD_CRED_MAX_ERR (0x1ULL << 52) +#define CE_ADM_ERR_DTL2_NPOSTED_D_CRED_MAX_ERR (0x1ULL << 53) +#define CE_ADM_ERR_DTL2_POSTED_HD_CRED_MAX_ERR (0x1ULL << 54) +#define CE_ADM_ERR_DTL2_POSTED_D_CRED_MAX_ERR (0x1ULL << 55) +#define CE_ADM_ERR_PORT1_PCIE_COR_ERR (0x1ULL << 56) +#define CE_ADM_ERR_PORT1_PCIE_NFAT_ERR (0x1ULL << 57) +#define CE_ADM_ERR_PORT1_PCIE_FAT_ERR (0x1ULL << 58) +#define CE_ADM_ERR_PORT2_PCIE_COR_ERR (0x1ULL << 59) +#define CE_ADM_ERR_PORT2_PCIE_NFAT_ERR (0x1ULL << 60) +#define CE_ADM_ERR_PORT2_PCIE_FAT_ERR (0x1ULL << 61) + +/* ce_adm_ure_ups_buf_barrier_flush register bit masks and shifts */ +#define FLUSH_SEL_PORT1_PIPE0_SHFT 0 +#define FLUSH_SEL_PORT1_PIPE1_SHFT 4 +#define FLUSH_SEL_PORT1_PIPE2_SHFT 8 +#define FLUSH_SEL_PORT1_PIPE3_SHFT 12 +#define FLUSH_SEL_PORT2_PIPE0_SHFT 16 +#define FLUSH_SEL_PORT2_PIPE1_SHFT 20 +#define FLUSH_SEL_PORT2_PIPE2_SHFT 24 +#define FLUSH_SEL_PORT2_PIPE3_SHFT 28 + +/* ce_dre_config1 register bit masks and shifts */ +#define CE_DRE_RO_ENABLE (0x1ULL << 0) +#define CE_DRE_DYN_RO_ENABLE (0x1ULL << 1) +#define CE_DRE_SUP_CONFIG_COMP_ERROR (0x1ULL << 2) +#define CE_DRE_SUP_IO_COMP_ERROR (0x1ULL << 3) +#define CE_DRE_ADDR_MODE_SHFT 4 + +/* ce_dre_config_req_status register bit masks */ +#define CE_DRE_LAST_CONFIG_COMPLETION (0x7ULL << 0) +#define CE_DRE_DOWNSTREAM_CONFIG_ERROR (0x1ULL << 3) +#define CE_DRE_CONFIG_COMPLETION_VALID (0x1ULL << 4) +#define CE_DRE_CONFIG_REQUEST_ACTIVE (0x1ULL << 5) + +/* ce_ure_control register bit masks & shifts */ +#define CE_URE_RD_MRG_ENABLE (0x1ULL << 0) +#define CE_URE_WRT_MRG_ENABLE1 (0x1ULL << 4) +#define CE_URE_WRT_MRG_ENABLE2 (0x1ULL << 5) +#define CE_URE_WRT_MRG_TIMER_SHFT 12 +#define CE_URE_WRT_MRG_TIMER_MASK (0x7FFULL << CE_URE_WRT_MRG_TIMER_SHFT) +#define CE_URE_WRT_MRG_TIMER(x) (((u64)(x) << \ + CE_URE_WRT_MRG_TIMER_SHFT) & \ + CE_URE_WRT_MRG_TIMER_MASK) +#define CE_URE_RSPQ_BYPASS_DISABLE (0x1ULL << 24) +#define CE_URE_UPS_DAT1_PAR_DISABLE (0x1ULL << 32) +#define CE_URE_UPS_HDR1_PAR_DISABLE (0x1ULL << 33) +#define CE_URE_UPS_DAT2_PAR_DISABLE (0x1ULL << 34) +#define CE_URE_UPS_HDR2_PAR_DISABLE (0x1ULL << 35) +#define CE_URE_ATE_PAR_DISABLE (0x1ULL << 36) +#define CE_URE_RCI_PAR_DISABLE (0x1ULL << 37) +#define CE_URE_RSPQ_PAR_DISABLE (0x1ULL << 38) +#define CE_URE_DNS_DAT_PAR_DISABLE (0x1ULL << 39) +#define CE_URE_DNS_HDR_PAR_DISABLE (0x1ULL << 40) +#define CE_URE_MALFORM_DISABLE (0x1ULL << 44) +#define CE_URE_UNSUP_DISABLE (0x1ULL << 45) + +/* ce_ure_page_map register bit masks & shifts */ +#define CE_URE_ATE3240_ENABLE (0x1ULL << 0) +#define CE_URE_ATE40_ENABLE (0x1ULL << 1) +#define CE_URE_PAGESIZE_SHFT 4 +#define CE_URE_PAGESIZE_MASK (0x7ULL << CE_URE_PAGESIZE_SHFT) +#define CE_URE_4K_PAGESIZE (0x0ULL << CE_URE_PAGESIZE_SHFT) +#define CE_URE_16K_PAGESIZE (0x1ULL << CE_URE_PAGESIZE_SHFT) +#define CE_URE_64K_PAGESIZE (0x2ULL << CE_URE_PAGESIZE_SHFT) +#define CE_URE_128K_PAGESIZE (0x3ULL << CE_URE_PAGESIZE_SHFT) +#define CE_URE_256K_PAGESIZE (0x4ULL << CE_URE_PAGESIZE_SHFT) + +/* ce_ure_pipe_sel register bit masks & shifts */ +#define PKT_TRAFIC_SHRT 16 +#define BUS_SRC_ID_SHFT 8 +#define DEV_SRC_ID_SHFT 3 +#define FNC_SRC_ID_SHFT 0 +#define CE_URE_TC_MASK (0x07ULL << PKT_TRAFIC_SHRT) +#define CE_URE_BUS_MASK (0xFFULL << BUS_SRC_ID_SHFT) +#define CE_URE_DEV_MASK (0x1FULL << DEV_SRC_ID_SHFT) +#define CE_URE_FNC_MASK (0x07ULL << FNC_SRC_ID_SHFT) +#define CE_URE_PIPE_BUS(b) (((u64)(b) << BUS_SRC_ID_SHFT) & \ + CE_URE_BUS_MASK) +#define CE_URE_PIPE_DEV(d) (((u64)(d) << DEV_SRC_ID_SHFT) & \ + CE_URE_DEV_MASK) +#define CE_URE_PIPE_FNC(f) (((u64)(f) << FNC_SRC_ID_SHFT) & \ + CE_URE_FNC_MASK) + +#define CE_URE_SEL1_SHFT 0 +#define CE_URE_SEL2_SHFT 20 +#define CE_URE_SEL3_SHFT 40 +#define CE_URE_SEL1_MASK (0x7FFFFULL << CE_URE_SEL1_SHFT) +#define CE_URE_SEL2_MASK (0x7FFFFULL << CE_URE_SEL2_SHFT) +#define CE_URE_SEL3_MASK (0x7FFFFULL << CE_URE_SEL3_SHFT) + + +/* ce_ure_pipe_mask register bit masks & shifts */ +#define CE_URE_MASK1_SHFT 0 +#define CE_URE_MASK2_SHFT 20 +#define CE_URE_MASK3_SHFT 40 +#define CE_URE_MASK1_MASK (0x7FFFFULL << CE_URE_MASK1_SHFT) +#define CE_URE_MASK2_MASK (0x7FFFFULL << CE_URE_MASK2_SHFT) +#define CE_URE_MASK3_MASK (0x7FFFFULL << CE_URE_MASK3_SHFT) + + +/* ce_ure_pcie_control1 register bit masks & shifts */ +#define CE_URE_SI (0x1ULL << 0) +#define CE_URE_ELAL_SHFT 4 +#define CE_URE_ELAL_MASK (0x7ULL << CE_URE_ELAL_SHFT) +#define CE_URE_ELAL_SET(n) (((u64)(n) << CE_URE_ELAL_SHFT) & \ + CE_URE_ELAL_MASK) +#define CE_URE_ELAL1_SHFT 8 +#define CE_URE_ELAL1_MASK (0x7ULL << CE_URE_ELAL1_SHFT) +#define CE_URE_ELAL1_SET(n) (((u64)(n) << CE_URE_ELAL1_SHFT) & \ + CE_URE_ELAL1_MASK) +#define CE_URE_SCC (0x1ULL << 12) +#define CE_URE_PN1_SHFT 16 +#define CE_URE_PN1_MASK (0xFFULL << CE_URE_PN1_SHFT) +#define CE_URE_PN2_SHFT 24 +#define CE_URE_PN2_MASK (0xFFULL << CE_URE_PN2_SHFT) +#define CE_URE_PN1_SET(n) (((u64)(n) << CE_URE_PN1_SHFT) & \ + CE_URE_PN1_MASK) +#define CE_URE_PN2_SET(n) (((u64)(n) << CE_URE_PN2_SHFT) & \ + CE_URE_PN2_MASK) + +/* ce_ure_pcie_control2 register bit masks & shifts */ +#define CE_URE_ABP (0x1ULL << 0) +#define CE_URE_PCP (0x1ULL << 1) +#define CE_URE_MSP (0x1ULL << 2) +#define CE_URE_AIP (0x1ULL << 3) +#define CE_URE_PIP (0x1ULL << 4) +#define CE_URE_HPS (0x1ULL << 5) +#define CE_URE_HPC (0x1ULL << 6) +#define CE_URE_SPLV_SHFT 7 +#define CE_URE_SPLV_MASK (0xFFULL << CE_URE_SPLV_SHFT) +#define CE_URE_SPLV_SET(n) (((u64)(n) << CE_URE_SPLV_SHFT) & \ + CE_URE_SPLV_MASK) +#define CE_URE_SPLS_SHFT 15 +#define CE_URE_SPLS_MASK (0x3ULL << CE_URE_SPLS_SHFT) +#define CE_URE_SPLS_SET(n) (((u64)(n) << CE_URE_SPLS_SHFT) & \ + CE_URE_SPLS_MASK) +#define CE_URE_PSN1_SHFT 19 +#define CE_URE_PSN1_MASK (0x1FFFULL << CE_URE_PSN1_SHFT) +#define CE_URE_PSN2_SHFT 32 +#define CE_URE_PSN2_MASK (0x1FFFULL << CE_URE_PSN2_SHFT) +#define CE_URE_PSN1_SET(n) (((u64)(n) << CE_URE_PSN1_SHFT) & \ + CE_URE_PSN1_MASK) +#define CE_URE_PSN2_SET(n) (((u64)(n) << CE_URE_PSN2_SHFT) & \ + CE_URE_PSN2_MASK) + +/* + * PIO address space ranges for CE + */ + +/* Local CE Registers Space */ +#define CE_PIO_MMR 0x00000000 +#define CE_PIO_MMR_LEN 0x04000000 + +/* PCI Compatible Config Space */ +#define CE_PIO_CONFIG_SPACE 0x04000000 +#define CE_PIO_CONFIG_SPACE_LEN 0x04000000 + +/* PCI I/O Space Alias */ +#define CE_PIO_IO_SPACE_ALIAS 0x08000000 +#define CE_PIO_IO_SPACE_ALIAS_LEN 0x08000000 + +/* PCI Enhanced Config Space */ +#define CE_PIO_E_CONFIG_SPACE 0x10000000 +#define CE_PIO_E_CONFIG_SPACE_LEN 0x10000000 + +/* PCI I/O Space */ +#define CE_PIO_IO_SPACE 0x100000000 +#define CE_PIO_IO_SPACE_LEN 0x100000000 + +/* PCI MEM Space */ +#define CE_PIO_MEM_SPACE 0x200000000 +#define CE_PIO_MEM_SPACE_LEN TIO_HWIN_SIZE + + +/* + * CE PCI Enhanced Config Space shifts & masks + */ +#define CE_E_CONFIG_BUS_SHFT 20 +#define CE_E_CONFIG_BUS_MASK (0xFF << CE_E_CONFIG_BUS_SHFT) +#define CE_E_CONFIG_DEVICE_SHFT 15 +#define CE_E_CONFIG_DEVICE_MASK (0x1F << CE_E_CONFIG_DEVICE_SHFT) +#define CE_E_CONFIG_FUNC_SHFT 12 +#define CE_E_CONFIG_FUNC_MASK (0x7 << CE_E_CONFIG_FUNC_SHFT) + +#endif /* __ASM_IA64_SN_TIOCE_H__ */ diff --git a/arch/ia64/include/asm/sn/tioce_provider.h b/arch/ia64/include/asm/sn/tioce_provider.h new file mode 100644 index 00000000000..32c32f30b09 --- /dev/null +++ b/arch/ia64/include/asm/sn/tioce_provider.h @@ -0,0 +1,63 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_CE_PROVIDER_H +#define _ASM_IA64_SN_CE_PROVIDER_H + +#include <asm/sn/pcibus_provider_defs.h> +#include <asm/sn/tioce.h> + +/* + * Common TIOCE structure shared between the prom and kernel + * + * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES TO THE + * PROM VERSION. + */ +struct tioce_common { + struct pcibus_bussoft ce_pcibus; /* common pciio header */ + + u32 ce_rev; + u64 ce_kernel_private; + u64 ce_prom_private; +}; + +struct tioce_kernel { + struct tioce_common *ce_common; + spinlock_t ce_lock; + struct list_head ce_dmamap_list; + + u64 ce_ate40_shadow[TIOCE_NUM_M40_ATES]; + u64 ce_ate3240_shadow[TIOCE_NUM_M3240_ATES]; + u32 ce_ate3240_pagesize; + + u8 ce_port1_secondary; + + /* per-port resources */ + struct { + int dirmap_refcnt; + u64 dirmap_shadow; + } ce_port[TIOCE_NUM_PORTS]; +}; + +struct tioce_dmamap { + struct list_head ce_dmamap_list; /* headed by tioce_kernel */ + u32 refcnt; + + u64 nbytes; /* # bytes mapped */ + + u64 ct_start; /* coretalk start address */ + u64 pci_start; /* bus start address */ + + u64 __iomem *ate_hw;/* hw ptr of first ate in map */ + u64 *ate_shadow; /* shadow ptr of firat ate */ + u16 ate_count; /* # ate's in the map */ +}; + +extern int tioce_init_provider(void); + +#endif /* __ASM_IA64_SN_CE_PROVIDER_H */ diff --git a/arch/ia64/include/asm/sn/tiocp.h b/arch/ia64/include/asm/sn/tiocp.h new file mode 100644 index 00000000000..e8ad0bb5b6c --- /dev/null +++ b/arch/ia64/include/asm/sn/tiocp.h @@ -0,0 +1,257 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003-2005 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_PCI_TIOCP_H +#define _ASM_IA64_SN_PCI_TIOCP_H + +#define TIOCP_HOST_INTR_ADDR 0x003FFFFFFFFFFFFFUL +#define TIOCP_PCI64_CMDTYPE_MEM (0x1ull << 60) +#define TIOCP_PCI64_CMDTYPE_MSI (0x3ull << 60) + + +/***************************************************************************** + *********************** TIOCP MMR structure mapping *************************** + *****************************************************************************/ + +struct tiocp{ + + /* 0x000000-0x00FFFF -- Local Registers */ + + /* 0x000000-0x000057 -- (Legacy Widget Space) Configuration */ + u64 cp_id; /* 0x000000 */ + u64 cp_stat; /* 0x000008 */ + u64 cp_err_upper; /* 0x000010 */ + u64 cp_err_lower; /* 0x000018 */ + #define cp_err cp_err_lower + u64 cp_control; /* 0x000020 */ + u64 cp_req_timeout; /* 0x000028 */ + u64 cp_intr_upper; /* 0x000030 */ + u64 cp_intr_lower; /* 0x000038 */ + #define cp_intr cp_intr_lower + u64 cp_err_cmdword; /* 0x000040 */ + u64 _pad_000048; /* 0x000048 */ + u64 cp_tflush; /* 0x000050 */ + + /* 0x000058-0x00007F -- Bridge-specific Configuration */ + u64 cp_aux_err; /* 0x000058 */ + u64 cp_resp_upper; /* 0x000060 */ + u64 cp_resp_lower; /* 0x000068 */ + #define cp_resp cp_resp_lower + u64 cp_tst_pin_ctrl; /* 0x000070 */ + u64 cp_addr_lkerr; /* 0x000078 */ + + /* 0x000080-0x00008F -- PMU & MAP */ + u64 cp_dir_map; /* 0x000080 */ + u64 _pad_000088; /* 0x000088 */ + + /* 0x000090-0x00009F -- SSRAM */ + u64 cp_map_fault; /* 0x000090 */ + u64 _pad_000098; /* 0x000098 */ + + /* 0x0000A0-0x0000AF -- Arbitration */ + u64 cp_arb; /* 0x0000A0 */ + u64 _pad_0000A8; /* 0x0000A8 */ + + /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */ + u64 cp_ate_parity_err; /* 0x0000B0 */ + u64 _pad_0000B8; /* 0x0000B8 */ + + /* 0x0000C0-0x0000FF -- PCI/GIO */ + u64 cp_bus_timeout; /* 0x0000C0 */ + u64 cp_pci_cfg; /* 0x0000C8 */ + u64 cp_pci_err_upper; /* 0x0000D0 */ + u64 cp_pci_err_lower; /* 0x0000D8 */ + #define cp_pci_err cp_pci_err_lower + u64 _pad_0000E0[4]; /* 0x0000{E0..F8} */ + + /* 0x000100-0x0001FF -- Interrupt */ + u64 cp_int_status; /* 0x000100 */ + u64 cp_int_enable; /* 0x000108 */ + u64 cp_int_rst_stat; /* 0x000110 */ + u64 cp_int_mode; /* 0x000118 */ + u64 cp_int_device; /* 0x000120 */ + u64 cp_int_host_err; /* 0x000128 */ + u64 cp_int_addr[8]; /* 0x0001{30,,,68} */ + u64 cp_err_int_view; /* 0x000170 */ + u64 cp_mult_int; /* 0x000178 */ + u64 cp_force_always[8]; /* 0x0001{80,,,B8} */ + u64 cp_force_pin[8]; /* 0x0001{C0,,,F8} */ + + /* 0x000200-0x000298 -- Device */ + u64 cp_device[4]; /* 0x0002{00,,,18} */ + u64 _pad_000220[4]; /* 0x0002{20,,,38} */ + u64 cp_wr_req_buf[4]; /* 0x0002{40,,,58} */ + u64 _pad_000260[4]; /* 0x0002{60,,,78} */ + u64 cp_rrb_map[2]; /* 0x0002{80,,,88} */ + #define cp_even_resp cp_rrb_map[0] /* 0x000280 */ + #define cp_odd_resp cp_rrb_map[1] /* 0x000288 */ + u64 cp_resp_status; /* 0x000290 */ + u64 cp_resp_clear; /* 0x000298 */ + + u64 _pad_0002A0[12]; /* 0x0002{A0..F8} */ + + /* 0x000300-0x0003F8 -- Buffer Address Match Registers */ + struct { + u64 upper; /* 0x0003{00,,,F0} */ + u64 lower; /* 0x0003{08,,,F8} */ + } cp_buf_addr_match[16]; + + /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */ + struct { + u64 flush_w_touch; /* 0x000{400,,,5C0} */ + u64 flush_wo_touch; /* 0x000{408,,,5C8} */ + u64 inflight; /* 0x000{410,,,5D0} */ + u64 prefetch; /* 0x000{418,,,5D8} */ + u64 total_pci_retry; /* 0x000{420,,,5E0} */ + u64 max_pci_retry; /* 0x000{428,,,5E8} */ + u64 max_latency; /* 0x000{430,,,5F0} */ + u64 clear_all; /* 0x000{438,,,5F8} */ + } cp_buf_count[8]; + + + /* 0x000600-0x0009FF -- PCI/X registers */ + u64 cp_pcix_bus_err_addr; /* 0x000600 */ + u64 cp_pcix_bus_err_attr; /* 0x000608 */ + u64 cp_pcix_bus_err_data; /* 0x000610 */ + u64 cp_pcix_pio_split_addr; /* 0x000618 */ + u64 cp_pcix_pio_split_attr; /* 0x000620 */ + u64 cp_pcix_dma_req_err_attr; /* 0x000628 */ + u64 cp_pcix_dma_req_err_addr; /* 0x000630 */ + u64 cp_pcix_timeout; /* 0x000638 */ + + u64 _pad_000640[24]; /* 0x000{640,,,6F8} */ + + /* 0x000700-0x000737 -- Debug Registers */ + u64 cp_ct_debug_ctl; /* 0x000700 */ + u64 cp_br_debug_ctl; /* 0x000708 */ + u64 cp_mux3_debug_ctl; /* 0x000710 */ + u64 cp_mux4_debug_ctl; /* 0x000718 */ + u64 cp_mux5_debug_ctl; /* 0x000720 */ + u64 cp_mux6_debug_ctl; /* 0x000728 */ + u64 cp_mux7_debug_ctl; /* 0x000730 */ + + u64 _pad_000738[89]; /* 0x000{738,,,9F8} */ + + /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */ + struct { + u64 cp_buf_addr; /* 0x000{A00,,,AF0} */ + u64 cp_buf_attr; /* 0X000{A08,,,AF8} */ + } cp_pcix_read_buf_64[16]; + + struct { + u64 cp_buf_addr; /* 0x000{B00,,,BE0} */ + u64 cp_buf_attr; /* 0x000{B08,,,BE8} */ + u64 cp_buf_valid; /* 0x000{B10,,,BF0} */ + u64 __pad1; /* 0x000{B18,,,BF8} */ + } cp_pcix_write_buf_64[8]; + + /* End of Local Registers -- Start of Address Map space */ + + char _pad_000c00[0x010000 - 0x000c00]; + + /* 0x010000-0x011FF8 -- Internal ATE RAM (Auto Parity Generation) */ + u64 cp_int_ate_ram[1024]; /* 0x010000-0x011FF8 */ + + char _pad_012000[0x14000 - 0x012000]; + + /* 0x014000-0x015FF8 -- Internal ATE RAM (Manual Parity Generation) */ + u64 cp_int_ate_ram_mp[1024]; /* 0x014000-0x015FF8 */ + + char _pad_016000[0x18000 - 0x016000]; + + /* 0x18000-0x197F8 -- TIOCP Write Request Ram */ + u64 cp_wr_req_lower[256]; /* 0x18000 - 0x187F8 */ + u64 cp_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */ + u64 cp_wr_req_parity[256]; /* 0x19000 - 0x197F8 */ + + char _pad_019800[0x1C000 - 0x019800]; + + /* 0x1C000-0x1EFF8 -- TIOCP Read Response Ram */ + u64 cp_rd_resp_lower[512]; /* 0x1C000 - 0x1CFF8 */ + u64 cp_rd_resp_upper[512]; /* 0x1D000 - 0x1DFF8 */ + u64 cp_rd_resp_parity[512]; /* 0x1E000 - 0x1EFF8 */ + + char _pad_01F000[0x20000 - 0x01F000]; + + /* 0x020000-0x021FFF -- Host Device (CP) Configuration Space (not used) */ + char _pad_020000[0x021000 - 0x20000]; + + /* 0x021000-0x027FFF -- PCI Device Configuration Spaces */ + union { + u8 c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */ + u16 s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */ + u32 l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */ + u64 d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */ + union { + u8 c[0x100 / 1]; + u16 s[0x100 / 2]; + u32 l[0x100 / 4]; + u64 d[0x100 / 8]; + } f[8]; + } cp_type0_cfg_dev[7]; /* 0x02{1000,,,7FFF} */ + + /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */ + union { + u8 c[0x1000 / 1]; /* 0x028000-0x029000 */ + u16 s[0x1000 / 2]; /* 0x028000-0x029000 */ + u32 l[0x1000 / 4]; /* 0x028000-0x029000 */ + u64 d[0x1000 / 8]; /* 0x028000-0x029000 */ + union { + u8 c[0x100 / 1]; + u16 s[0x100 / 2]; + u32 l[0x100 / 4]; + u64 d[0x100 / 8]; + } f[8]; + } cp_type1_cfg; /* 0x028000-0x029000 */ + + char _pad_029000[0x030000-0x029000]; + + /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */ + union { + u8 c[8 / 1]; + u16 s[8 / 2]; + u32 l[8 / 4]; + u64 d[8 / 8]; + } cp_pci_iack; /* 0x030000-0x030007 */ + + char _pad_030007[0x040000-0x030008]; + + /* 0x040000-0x040007 -- PCIX Special Cycle */ + union { + u8 c[8 / 1]; + u16 s[8 / 2]; + u32 l[8 / 4]; + u64 d[8 / 8]; + } cp_pcix_cycle; /* 0x040000-0x040007 */ + + char _pad_040007[0x200000-0x040008]; + + /* 0x200000-0x7FFFFF -- PCI/GIO Device Spaces */ + union { + u8 c[0x100000 / 1]; + u16 s[0x100000 / 2]; + u32 l[0x100000 / 4]; + u64 d[0x100000 / 8]; + } cp_devio_raw[6]; /* 0x200000-0x7FFFFF */ + + #define cp_devio(n) cp_devio_raw[((n)<2)?(n*2):(n+2)] + + char _pad_800000[0xA00000-0x800000]; + + /* 0xA00000-0xBFFFFF -- PCI/GIO Device Spaces w/flush */ + union { + u8 c[0x100000 / 1]; + u16 s[0x100000 / 2]; + u32 l[0x100000 / 4]; + u64 d[0x100000 / 8]; + } cp_devio_raw_flush[6]; /* 0xA00000-0xBFFFFF */ + + #define cp_devio_flush(n) cp_devio_raw_flush[((n)<2)?(n*2):(n+2)] + +}; + +#endif /* _ASM_IA64_SN_PCI_TIOCP_H */ diff --git a/arch/ia64/include/asm/sn/tiocx.h b/arch/ia64/include/asm/sn/tiocx.h new file mode 100644 index 00000000000..d29728492f3 --- /dev/null +++ b/arch/ia64/include/asm/sn/tiocx.h @@ -0,0 +1,72 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2005 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_TIO_TIOCX_H +#define _ASM_IA64_SN_TIO_TIOCX_H + +#ifdef __KERNEL__ + +struct cx_id_s { + unsigned int part_num; + unsigned int mfg_num; + int nasid; +}; + +struct cx_dev { + struct cx_id_s cx_id; + int bt; /* board/blade type */ + void *soft; /* driver specific */ + struct hubdev_info *hubdev; + struct device dev; + struct cx_drv *driver; +}; + +struct cx_device_id { + unsigned int part_num; + unsigned int mfg_num; +}; + +struct cx_drv { + char *name; + const struct cx_device_id *id_table; + struct device_driver driver; + int (*probe) (struct cx_dev * dev, const struct cx_device_id * id); + int (*remove) (struct cx_dev * dev); +}; + +/* create DMA address by stripping AS bits */ +#define TIOCX_DMA_ADDR(a) (u64)((u64)(a) & 0xffffcfffffffffUL) + +#define TIOCX_TO_TIOCX_DMA_ADDR(a) (u64)(((u64)(a) & 0xfffffffff) | \ + ((((u64)(a)) & 0xffffc000000000UL) <<2)) + +#define TIO_CE_ASIC_PARTNUM 0xce00 +#define TIOCX_CORELET 3 + +/* These are taken from tio_mmr_as.h */ +#define TIO_ICE_FRZ_CFG TIO_MMR_ADDR_MOD(0x00000000b0008100UL) +#define TIO_ICE_PMI_TX_CFG TIO_MMR_ADDR_MOD(0x00000000b000b100UL) +#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3 TIO_MMR_ADDR_MOD(0x00000000b000be18UL) +#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3_CREDIT_CNT_MASK 0x000000000000000fUL + +#define to_cx_dev(n) container_of(n, struct cx_dev, dev) +#define to_cx_driver(drv) container_of(drv, struct cx_drv, driver) + +extern struct sn_irq_info *tiocx_irq_alloc(nasid_t, int, int, nasid_t, int); +extern void tiocx_irq_free(struct sn_irq_info *); +extern int cx_device_unregister(struct cx_dev *); +extern int cx_device_register(nasid_t, int, int, struct hubdev_info *, int); +extern int cx_driver_unregister(struct cx_drv *); +extern int cx_driver_register(struct cx_drv *); +extern u64 tiocx_dma_addr(u64 addr); +extern u64 tiocx_swin_base(int nasid); +extern void tiocx_mmr_store(int nasid, u64 offset, u64 value); +extern u64 tiocx_mmr_load(int nasid, u64 offset); + +#endif // __KERNEL__ +#endif // _ASM_IA64_SN_TIO_TIOCX__ diff --git a/arch/ia64/include/asm/sn/types.h b/arch/ia64/include/asm/sn/types.h new file mode 100644 index 00000000000..8e04ee211e5 --- /dev/null +++ b/arch/ia64/include/asm/sn/types.h @@ -0,0 +1,26 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999,2001-2003 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_IA64_SN_TYPES_H +#define _ASM_IA64_SN_TYPES_H + +#include <linux/types.h> + +typedef unsigned long cpuid_t; +typedef signed short nasid_t; /* node id in numa-as-id space */ +typedef signed char partid_t; /* partition ID type */ +typedef unsigned int moduleid_t; /* user-visible module number type */ +typedef unsigned int cmoduleid_t; /* kernel compact module id type */ +typedef unsigned char slotid_t; /* slot (blade) within module */ +typedef unsigned char slabid_t; /* slab (asic) within slot */ +typedef u64 nic_t; +typedef unsigned long iopaddr_t; +typedef unsigned long paddr_t; +typedef short cnodeid_t; + +#endif /* _ASM_IA64_SN_TYPES_H */ |