aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/sibyte/swarm/time.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/sibyte/swarm/time.c')
-rw-r--r--arch/mips/sibyte/swarm/time.c244
1 files changed, 244 insertions, 0 deletions
diff --git a/arch/mips/sibyte/swarm/time.c b/arch/mips/sibyte/swarm/time.c
new file mode 100644
index 00000000000..c1f1a9defee
--- /dev/null
+++ b/arch/mips/sibyte/swarm/time.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * Time routines for the swarm board. We pass all the hard stuff
+ * through to the sb1250 handling code. Only thing we really keep
+ * track of here is what time of day we think it is. And we don't
+ * really even do a good job of that...
+ */
+
+
+#include <linux/bcd.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <asm/system.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_smbus.h>
+
+static unsigned long long sec_bias = 0;
+static unsigned int usec_bias = 0;
+
+/* Xicor 1241 definitions */
+
+/*
+ * Register bits
+ */
+
+#define X1241REG_SR_BAT 0x80 /* currently on battery power */
+#define X1241REG_SR_RWEL 0x04 /* r/w latch is enabled, can write RTC */
+#define X1241REG_SR_WEL 0x02 /* r/w latch is unlocked, can enable r/w now */
+#define X1241REG_SR_RTCF 0x01 /* clock failed */
+#define X1241REG_BL_BP2 0x80 /* block protect 2 */
+#define X1241REG_BL_BP1 0x40 /* block protect 1 */
+#define X1241REG_BL_BP0 0x20 /* block protect 0 */
+#define X1241REG_BL_WD1 0x10
+#define X1241REG_BL_WD0 0x08
+#define X1241REG_HR_MIL 0x80 /* military time format */
+
+/*
+ * Register numbers
+ */
+
+#define X1241REG_BL 0x10 /* block protect bits */
+#define X1241REG_INT 0x11 /* */
+#define X1241REG_SC 0x30 /* Seconds */
+#define X1241REG_MN 0x31 /* Minutes */
+#define X1241REG_HR 0x32 /* Hours */
+#define X1241REG_DT 0x33 /* Day of month */
+#define X1241REG_MO 0x34 /* Month */
+#define X1241REG_YR 0x35 /* Year */
+#define X1241REG_DW 0x36 /* Day of Week */
+#define X1241REG_Y2K 0x37 /* Year 2K */
+#define X1241REG_SR 0x3F /* Status register */
+
+#define X1241_CCR_ADDRESS 0x6F
+
+#define SMB_CSR(reg) (IOADDR(A_SMB_REGISTER(1, reg)))
+
+static int xicor_read(uint8_t addr)
+{
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
+ bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA));
+ bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE),
+ SMB_CSR(R_SMB_START));
+
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
+ SMB_CSR(R_SMB_START));
+
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ /* Clear error bit by writing a 1 */
+ bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ return -1;
+ }
+
+ return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+}
+
+static int xicor_write(uint8_t addr, int b)
+{
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ bus_writeq(addr, SMB_CSR(R_SMB_CMD));
+ bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
+ bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
+ SMB_CSR(R_SMB_START));
+
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ /* Clear error bit by writing a 1 */
+ bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ return -1;
+ } else {
+ return 0;
+ }
+}
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be
+ * called 500 ms after the second nowtime has started, because when
+ * nowtime is written into the registers of the CMOS clock, it will
+ * jump to the next second precisely 500 ms later. Check the Motorola
+ * MC146818A or Dallas DS12887 data sheet for details.
+ *
+ * BUG: This routine does not handle hour overflow properly; it just
+ * sets the minutes. Usually you'll only notice that after reboot!
+ */
+int set_rtc_mmss(unsigned long nowtime)
+{
+ int retval = 0;
+ int real_seconds, real_minutes, cmos_minutes;
+
+ cmos_minutes = xicor_read(X1241REG_MN);
+ cmos_minutes = BCD2BIN(cmos_minutes);
+
+ /*
+ * since we're only adjusting minutes and seconds,
+ * don't interfere with hour overflow. This avoids
+ * messing with unknown time zones but requires your
+ * RTC not to be off by more than 15 minutes
+ */
+ real_seconds = nowtime % 60;
+ real_minutes = nowtime / 60;
+ if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+ real_minutes += 30; /* correct for half hour time zone */
+ real_minutes %= 60;
+
+ /* unlock writes to the CCR */
+ xicor_write(X1241REG_SR, X1241REG_SR_WEL);
+ xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL);
+
+ if (abs(real_minutes - cmos_minutes) < 30) {
+ real_seconds = BIN2BCD(real_seconds);
+ real_minutes = BIN2BCD(real_minutes);
+ xicor_write(X1241REG_SC, real_seconds);
+ xicor_write(X1241REG_MN, real_minutes);
+ } else {
+ printk(KERN_WARNING
+ "set_rtc_mmss: can't update from %d to %d\n",
+ cmos_minutes, real_minutes);
+ retval = -1;
+ }
+
+ xicor_write(X1241REG_SR, 0);
+
+ printk("set_rtc_mmss: %02d:%02d\n", real_minutes, real_seconds);
+
+ return retval;
+}
+
+static unsigned long __init get_swarm_time(void)
+{
+ unsigned int year, mon, day, hour, min, sec, y2k;
+
+ sec = xicor_read(X1241REG_SC);
+ min = xicor_read(X1241REG_MN);
+ hour = xicor_read(X1241REG_HR);
+
+ if (hour & X1241REG_HR_MIL) {
+ hour &= 0x3f;
+ } else {
+ if (hour & 0x20)
+ hour = (hour & 0xf) + 0x12;
+ }
+
+ sec = BCD2BIN(sec);
+ min = BCD2BIN(min);
+ hour = BCD2BIN(hour);
+
+ day = xicor_read(X1241REG_DT);
+ mon = xicor_read(X1241REG_MO);
+ year = xicor_read(X1241REG_YR);
+ y2k = xicor_read(X1241REG_Y2K);
+
+ day = BCD2BIN(day);
+ mon = BCD2BIN(mon);
+ year = BCD2BIN(year);
+ y2k = BCD2BIN(y2k);
+
+ year += (y2k * 100);
+
+ return mktime(year, mon, day, hour, min, sec);
+}
+
+/*
+ * Bring up the timer at 100 Hz.
+ */
+void __init swarm_time_init(void)
+{
+ unsigned int flags;
+ int status;
+
+ /* Set up the scd general purpose timer 0 to cpu 0 */
+ sb1250_time_init();
+
+ /* Establish communication with the Xicor 1241 RTC */
+ /* XXXKW how do I share the SMBus with the I2C subsystem? */
+
+ bus_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ));
+ bus_writeq(0, SMB_CSR(R_SMB_CONTROL));
+
+ if ((status = xicor_read(X1241REG_SR_RTCF)) < 0) {
+ printk("x1241: couldn't detect on SWARM SMBus 1\n");
+ } else {
+ if (status & X1241REG_SR_RTCF)
+ printk("x1241: battery failed -- time is probably wrong\n");
+ write_seqlock_irqsave(&xtime_lock, flags);
+ xtime.tv_sec = get_swarm_time();
+ xtime.tv_nsec = 0;
+ write_sequnlock_irqrestore(&xtime_lock, flags);
+ }
+}