diff options
Diffstat (limited to 'arch/parisc/include/asm/system.h')
| -rw-r--r-- | arch/parisc/include/asm/system.h | 182 |
1 files changed, 182 insertions, 0 deletions
diff --git a/arch/parisc/include/asm/system.h b/arch/parisc/include/asm/system.h new file mode 100644 index 00000000000..ee80c920b46 --- /dev/null +++ b/arch/parisc/include/asm/system.h @@ -0,0 +1,182 @@ +#ifndef __PARISC_SYSTEM_H +#define __PARISC_SYSTEM_H + +#include <asm/psw.h> + +/* The program status word as bitfields. */ +struct pa_psw { + unsigned int y:1; + unsigned int z:1; + unsigned int rv:2; + unsigned int w:1; + unsigned int e:1; + unsigned int s:1; + unsigned int t:1; + + unsigned int h:1; + unsigned int l:1; + unsigned int n:1; + unsigned int x:1; + unsigned int b:1; + unsigned int c:1; + unsigned int v:1; + unsigned int m:1; + + unsigned int cb:8; + + unsigned int o:1; + unsigned int g:1; + unsigned int f:1; + unsigned int r:1; + unsigned int q:1; + unsigned int p:1; + unsigned int d:1; + unsigned int i:1; +}; + +#ifdef CONFIG_64BIT +#define pa_psw(task) ((struct pa_psw *) ((char *) (task) + TASK_PT_PSW + 4)) +#else +#define pa_psw(task) ((struct pa_psw *) ((char *) (task) + TASK_PT_PSW)) +#endif + +struct task_struct; + +extern struct task_struct *_switch_to(struct task_struct *, struct task_struct *); + +#define switch_to(prev, next, last) do { \ + (last) = _switch_to(prev, next); \ +} while(0) + +/* interrupt control */ +#define local_save_flags(x) __asm__ __volatile__("ssm 0, %0" : "=r" (x) : : "memory") +#define local_irq_disable() __asm__ __volatile__("rsm %0,%%r0\n" : : "i" (PSW_I) : "memory" ) +#define local_irq_enable() __asm__ __volatile__("ssm %0,%%r0\n" : : "i" (PSW_I) : "memory" ) + +#define local_irq_save(x) \ + __asm__ __volatile__("rsm %1,%0" : "=r" (x) :"i" (PSW_I) : "memory" ) +#define local_irq_restore(x) \ + __asm__ __volatile__("mtsm %0" : : "r" (x) : "memory" ) + +#define irqs_disabled() \ +({ \ + unsigned long flags; \ + local_save_flags(flags); \ + (flags & PSW_I) == 0; \ +}) + +#define mfctl(reg) ({ \ + unsigned long cr; \ + __asm__ __volatile__( \ + "mfctl " #reg ",%0" : \ + "=r" (cr) \ + ); \ + cr; \ +}) + +#define mtctl(gr, cr) \ + __asm__ __volatile__("mtctl %0,%1" \ + : /* no outputs */ \ + : "r" (gr), "i" (cr) : "memory") + +/* these are here to de-mystefy the calling code, and to provide hooks */ +/* which I needed for debugging EIEM problems -PB */ +#define get_eiem() mfctl(15) +static inline void set_eiem(unsigned long val) +{ + mtctl(val, 15); +} + +#define mfsp(reg) ({ \ + unsigned long cr; \ + __asm__ __volatile__( \ + "mfsp " #reg ",%0" : \ + "=r" (cr) \ + ); \ + cr; \ +}) + +#define mtsp(gr, cr) \ + __asm__ __volatile__("mtsp %0,%1" \ + : /* no outputs */ \ + : "r" (gr), "i" (cr) : "memory") + + +/* +** This is simply the barrier() macro from linux/kernel.h but when serial.c +** uses tqueue.h uses smp_mb() defined using barrier(), linux/kernel.h +** hasn't yet been included yet so it fails, thus repeating the macro here. +** +** PA-RISC architecture allows for weakly ordered memory accesses although +** none of the processors use it. There is a strong ordered bit that is +** set in the O-bit of the page directory entry. Operating systems that +** can not tolerate out of order accesses should set this bit when mapping +** pages. The O-bit of the PSW should also be set to 1 (I don't believe any +** of the processor implemented the PSW O-bit). The PCX-W ERS states that +** the TLB O-bit is not implemented so the page directory does not need to +** have the O-bit set when mapping pages (section 3.1). This section also +** states that the PSW Y, Z, G, and O bits are not implemented. +** So it looks like nothing needs to be done for parisc-linux (yet). +** (thanks to chada for the above comment -ggg) +** +** The __asm__ op below simple prevents gcc/ld from reordering +** instructions across the mb() "call". +*/ +#define mb() __asm__ __volatile__("":::"memory") /* barrier() */ +#define rmb() mb() +#define wmb() mb() +#define smp_mb() mb() +#define smp_rmb() mb() +#define smp_wmb() mb() +#define smp_read_barrier_depends() do { } while(0) +#define read_barrier_depends() do { } while(0) + +#define set_mb(var, value) do { var = value; mb(); } while (0) + +#ifndef CONFIG_PA20 +/* Because kmalloc only guarantees 8-byte alignment for kmalloc'd data, + and GCC only guarantees 8-byte alignment for stack locals, we can't + be assured of 16-byte alignment for atomic lock data even if we + specify "__attribute ((aligned(16)))" in the type declaration. So, + we use a struct containing an array of four ints for the atomic lock + type and dynamically select the 16-byte aligned int from the array + for the semaphore. */ + +#define __PA_LDCW_ALIGNMENT 16 +#define __ldcw_align(a) ({ \ + unsigned long __ret = (unsigned long) &(a)->lock[0]; \ + __ret = (__ret + __PA_LDCW_ALIGNMENT - 1) \ + & ~(__PA_LDCW_ALIGNMENT - 1); \ + (volatile unsigned int *) __ret; \ +}) +#define __LDCW "ldcw" + +#else /*CONFIG_PA20*/ +/* From: "Jim Hull" <jim.hull of hp.com> + I've attached a summary of the change, but basically, for PA 2.0, as + long as the ",CO" (coherent operation) completer is specified, then the + 16-byte alignment requirement for ldcw and ldcd is relaxed, and instead + they only require "natural" alignment (4-byte for ldcw, 8-byte for + ldcd). */ + +#define __PA_LDCW_ALIGNMENT 4 +#define __ldcw_align(a) ((volatile unsigned int *)a) +#define __LDCW "ldcw,co" + +#endif /*!CONFIG_PA20*/ + +/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */ +#define __ldcw(a) ({ \ + unsigned __ret; \ + __asm__ __volatile__(__LDCW " 0(%1),%0" \ + : "=r" (__ret) : "r" (a)); \ + __ret; \ +}) + +#ifdef CONFIG_SMP +# define __lock_aligned __attribute__((__section__(".data.lock_aligned"))) +#endif + +#define arch_align_stack(x) (x) + +#endif |