diff options
Diffstat (limited to 'arch/powerpc/platforms/83xx/mpc834x_sys.c')
| -rw-r--r-- | arch/powerpc/platforms/83xx/mpc834x_sys.c | 213 |
1 files changed, 0 insertions, 213 deletions
diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c deleted file mode 100644 index 873ec543c36..00000000000 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ /dev/null @@ -1,213 +0,0 @@ -/* - * arch/powerpc/platforms/83xx/mpc834x_sys.c - * - * MPC834x SYS board specific routines - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> - -#include <asm/system.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/ipic.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/prom.h> -#include <asm/udbg.h> -#include <sysdev/fsl_soc.h> - -#include "mpc83xx.h" - -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -#endif - -#define BCSR5_INT_USB 0x02 -/* Note: This is only for PB, not for PB+PIB - * On PB only port0 is connected using ULPI */ -static int mpc834x_usb_cfg(void) -{ - unsigned long sccr, sicrl; - void __iomem *immap; - void __iomem *bcsr_regs = NULL; - u8 bcsr5; - struct device_node *np = NULL; - int port0_is_dr = 0; - - if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL) - port0_is_dr = 1; - if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){ - if (port0_is_dr) { - printk(KERN_WARNING - "There is only one USB port on PB board! \n"); - return -1; - } else if (!port0_is_dr) - /* No usb port enabled */ - return -1; - } - - immap = ioremap(get_immrbase(), 0x1000); - if (!immap) - return -1; - - /* Configure clock */ - sccr = in_be32(immap + MPC83XX_SCCR_OFFS); - if (port0_is_dr) - sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ - else - sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ - out_be32(immap + MPC83XX_SCCR_OFFS, sccr); - - /* Configure Pin */ - sicrl = in_be32(immap + MPC83XX_SICRL_OFFS); - /* set port0 only */ - if (port0_is_dr) - sicrl |= MPC83XX_SICRL_USB0; - else - sicrl &= ~(MPC83XX_SICRL_USB0); - out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); - - iounmap(immap); - - /* Map BCSR area */ - np = of_find_node_by_name(NULL, "bcsr"); - if (np != 0) { - struct resource res; - - of_address_to_resource(np, 0, &res); - bcsr_regs = ioremap(res.start, res.end - res.start + 1); - of_node_put(np); - } - if (!bcsr_regs) - return -1; - - /* - * if SYS board is plug into PIB board, - * force to use the PHY on SYS board - */ - bcsr5 = in_8(bcsr_regs + 5); - if (!(bcsr5 & BCSR5_INT_USB)) - out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB)); - iounmap(bcsr_regs); - return 0; -} - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void __init mpc834x_sys_setup_arch(void) -{ - struct device_node *np; - - if (ppc_md.progress) - ppc_md.progress("mpc834x_sys_setup_arch()", 0); - - np = of_find_node_by_type(NULL, "cpu"); - if (np != 0) { - const unsigned int *fp = - get_property(np, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(np); - } - -#ifdef CONFIG_PCI - for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) - add_bridge(np); - - ppc_md.pci_exclude_device = mpc83xx_exclude_device; -#endif - - mpc834x_usb_cfg(); - -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif -} - -static void __init mpc834x_sys_init_IRQ(void) -{ - struct device_node *np; - - np = of_find_node_by_type(NULL, "ipic"); - if (!np) - return; - - ipic_init(np, 0); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); -} - -#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) -extern ulong ds1374_get_rtc_time(void); -extern int ds1374_set_rtc_time(ulong); - -static int __init mpc834x_rtc_hookup(void) -{ - struct timespec tv; - - ppc_md.get_rtc_time = ds1374_get_rtc_time; - ppc_md.set_rtc_time = ds1374_set_rtc_time; - - tv.tv_nsec = 0; - tv.tv_sec = (ppc_md.get_rtc_time) (); - do_settimeofday(&tv); - - return 0; -} - -late_initcall(mpc834x_rtc_hookup); -#endif - -/* - * Called very early, MMU is off, device-tree isn't unflattened - */ -static int __init mpc834x_sys_probe(void) -{ - /* We always match for now, eventually we should look at the flat - dev tree to ensure this is the board we are suppose to run on - */ - return 1; -} - -define_machine(mpc834x_sys) { - .name = "MPC834x SYS", - .probe = mpc834x_sys_probe, - .setup_arch = mpc834x_sys_setup_arch, - .init_IRQ = mpc834x_sys_init_IRQ, - .get_irq = ipic_get_irq, - .restart = mpc83xx_restart, - .time_init = mpc83xx_time_init, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, -}; |