aboutsummaryrefslogtreecommitdiff
path: root/arch/ppc/8xx_io/enet.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/8xx_io/enet.c')
-rw-r--r--arch/ppc/8xx_io/enet.c971
1 files changed, 971 insertions, 0 deletions
diff --git a/arch/ppc/8xx_io/enet.c b/arch/ppc/8xx_io/enet.c
new file mode 100644
index 00000000000..4ea7158e506
--- /dev/null
+++ b/arch/ppc/8xx_io/enet.c
@@ -0,0 +1,971 @@
+/*
+ * Ethernet driver for Motorola MPC8xx.
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * I copied the basic skeleton from the lance driver, because I did not
+ * know how to write the Linux driver, but I did know how the LANCE worked.
+ *
+ * This version of the driver is somewhat selectable for the different
+ * processor/board combinations. It works for the boards I know about
+ * now, and should be easily modified to include others. Some of the
+ * configuration information is contained in <asm/commproc.h> and the
+ * remainder is here.
+ *
+ * Buffer descriptors are kept in the CPM dual port RAM, and the frame
+ * buffers are in the host memory.
+ *
+ * Right now, I am very watseful with the buffers. I allocate memory
+ * pages and then divide them into 2K frame buffers. This way I know I
+ * have buffers large enough to hold one frame within one buffer descriptor.
+ * Once I get this working, I will use 64 or 128 byte CPM buffers, which
+ * will be much more memory efficient and will easily handle lots of
+ * small packets.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/bitops.h>
+
+#include <asm/8xx_immap.h>
+#include <asm/pgtable.h>
+#include <asm/mpc8xx.h>
+#include <asm/uaccess.h>
+#include <asm/commproc.h>
+
+/*
+ * Theory of Operation
+ *
+ * The MPC8xx CPM performs the Ethernet processing on SCC1. It can use
+ * an aribtrary number of buffers on byte boundaries, but must have at
+ * least two receive buffers to prevent constant overrun conditions.
+ *
+ * The buffer descriptors are allocated from the CPM dual port memory
+ * with the data buffers allocated from host memory, just like all other
+ * serial communication protocols. The host memory buffers are allocated
+ * from the free page pool, and then divided into smaller receive and
+ * transmit buffers. The size of the buffers should be a power of two,
+ * since that nicely divides the page. This creates a ring buffer
+ * structure similar to the LANCE and other controllers.
+ *
+ * Like the LANCE driver:
+ * The driver runs as two independent, single-threaded flows of control. One
+ * is the send-packet routine, which enforces single-threaded use by the
+ * cep->tx_busy flag. The other thread is the interrupt handler, which is
+ * single threaded by the hardware and other software.
+ *
+ * The send packet thread has partial control over the Tx ring and the
+ * 'cep->tx_busy' flag. It sets the tx_busy flag whenever it's queuing a Tx
+ * packet. If the next queue slot is empty, it clears the tx_busy flag when
+ * finished otherwise it sets the 'lp->tx_full' flag.
+ *
+ * The MBX has a control register external to the MPC8xx that has some
+ * control of the Ethernet interface. Information is in the manual for
+ * your board.
+ *
+ * The RPX boards have an external control/status register. Consult the
+ * programming documents for details unique to your board.
+ *
+ * For the TQM8xx(L) modules, there is no control register interface.
+ * All functions are directly controlled using I/O pins. See <asm/commproc.h>.
+ */
+
+/* The transmitter timeout
+ */
+#define TX_TIMEOUT (2*HZ)
+
+/* The number of Tx and Rx buffers. These are allocated from the page
+ * pool. The code may assume these are power of two, so it is best
+ * to keep them that size.
+ * We don't need to allocate pages for the transmitter. We just use
+ * the skbuffer directly.
+ */
+#ifdef CONFIG_ENET_BIG_BUFFERS
+#define CPM_ENET_RX_PAGES 32
+#define CPM_ENET_RX_FRSIZE 2048
+#define CPM_ENET_RX_FRPPG (PAGE_SIZE / CPM_ENET_RX_FRSIZE)
+#define RX_RING_SIZE (CPM_ENET_RX_FRPPG * CPM_ENET_RX_PAGES)
+#define TX_RING_SIZE 64 /* Must be power of two */
+#define TX_RING_MOD_MASK 63 /* for this to work */
+#else
+#define CPM_ENET_RX_PAGES 4
+#define CPM_ENET_RX_FRSIZE 2048
+#define CPM_ENET_RX_FRPPG (PAGE_SIZE / CPM_ENET_RX_FRSIZE)
+#define RX_RING_SIZE (CPM_ENET_RX_FRPPG * CPM_ENET_RX_PAGES)
+#define TX_RING_SIZE 8 /* Must be power of two */
+#define TX_RING_MOD_MASK 7 /* for this to work */
+#endif
+
+/* The CPM stores dest/src/type, data, and checksum for receive packets.
+ */
+#define PKT_MAXBUF_SIZE 1518
+#define PKT_MINBUF_SIZE 64
+#define PKT_MAXBLR_SIZE 1520
+
+/* The CPM buffer descriptors track the ring buffers. The rx_bd_base and
+ * tx_bd_base always point to the base of the buffer descriptors. The
+ * cur_rx and cur_tx point to the currently available buffer.
+ * The dirty_tx tracks the current buffer that is being sent by the
+ * controller. The cur_tx and dirty_tx are equal under both completely
+ * empty and completely full conditions. The empty/ready indicator in
+ * the buffer descriptor determines the actual condition.
+ */
+struct scc_enet_private {
+ /* The saved address of a sent-in-place packet/buffer, for skfree(). */
+ struct sk_buff* tx_skbuff[TX_RING_SIZE];
+ ushort skb_cur;
+ ushort skb_dirty;
+
+ /* CPM dual port RAM relative addresses.
+ */
+ cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */
+ cbd_t *tx_bd_base;
+ cbd_t *cur_rx, *cur_tx; /* The next free ring entry */
+ cbd_t *dirty_tx; /* The ring entries to be free()ed. */
+ scc_t *sccp;
+
+ /* Virtual addresses for the receive buffers because we can't
+ * do a __va() on them anymore.
+ */
+ unsigned char *rx_vaddr[RX_RING_SIZE];
+ struct net_device_stats stats;
+ uint tx_full;
+ spinlock_t lock;
+};
+
+static int scc_enet_open(struct net_device *dev);
+static int scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static int scc_enet_rx(struct net_device *dev);
+static void scc_enet_interrupt(void *dev_id, struct pt_regs *regs);
+static int scc_enet_close(struct net_device *dev);
+static struct net_device_stats *scc_enet_get_stats(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+
+/* Get this from various configuration locations (depends on board).
+*/
+/*static ushort my_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };*/
+
+/* Typically, 860(T) boards use SCC1 for Ethernet, and other 8xx boards
+ * use SCC2. Some even may use SCC3.
+ * This is easily extended if necessary.
+ */
+#if defined(CONFIG_SCC3_ENET)
+#define CPM_CR_ENET CPM_CR_CH_SCC3
+#define PROFF_ENET PROFF_SCC3
+#define SCC_ENET 2 /* Index, not number! */
+#define CPMVEC_ENET CPMVEC_SCC3
+#elif defined(CONFIG_SCC2_ENET)
+#define CPM_CR_ENET CPM_CR_CH_SCC2
+#define PROFF_ENET PROFF_SCC2
+#define SCC_ENET 1 /* Index, not number! */
+#define CPMVEC_ENET CPMVEC_SCC2
+#elif defined(CONFIG_SCC1_ENET)
+#define CPM_CR_ENET CPM_CR_CH_SCC1
+#define PROFF_ENET PROFF_SCC1
+#define SCC_ENET 0 /* Index, not number! */
+#define CPMVEC_ENET CPMVEC_SCC1
+#else
+#error CONFIG_SCCx_ENET not defined
+#endif
+
+static int
+scc_enet_open(struct net_device *dev)
+{
+
+ /* I should reset the ring buffers here, but I don't yet know
+ * a simple way to do that.
+ */
+
+ netif_start_queue(dev);
+ return 0; /* Always succeed */
+}
+
+static int
+scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
+ volatile cbd_t *bdp;
+
+ /* Fill in a Tx ring entry */
+ bdp = cep->cur_tx;
+
+#ifndef final_version
+ if (bdp->cbd_sc & BD_ENET_TX_READY) {
+ /* Ooops. All transmit buffers are full. Bail out.
+ * This should not happen, since cep->tx_busy should be set.
+ */
+ printk("%s: tx queue full!.\n", dev->name);
+ return 1;
+ }
+#endif
+
+ /* Clear all of the status flags.
+ */
+ bdp->cbd_sc &= ~BD_ENET_TX_STATS;
+
+ /* If the frame is short, tell CPM to pad it.
+ */
+ if (skb->len <= ETH_ZLEN)
+ bdp->cbd_sc |= BD_ENET_TX_PAD;
+ else
+ bdp->cbd_sc &= ~BD_ENET_TX_PAD;
+
+ /* Set buffer length and buffer pointer.
+ */
+ bdp->cbd_datlen = skb->len;
+ bdp->cbd_bufaddr = __pa(skb->data);
+
+ /* Save skb pointer.
+ */
+ cep->tx_skbuff[cep->skb_cur] = skb;
+
+ cep->stats.tx_bytes += skb->len;
+ cep->skb_cur = (cep->skb_cur+1) & TX_RING_MOD_MASK;
+
+ /* Push the data cache so the CPM does not get stale memory
+ * data.
+ */
+ flush_dcache_range((unsigned long)(skb->data),
+ (unsigned long)(skb->data + skb->len));
+
+ spin_lock_irq(&cep->lock);
+
+ /* Send it on its way. Tell CPM its ready, interrupt when done,
+ * its the last BD of the frame, and to put the CRC on the end.
+ */
+ bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC);
+
+ dev->trans_start = jiffies;
+
+ /* If this was the last BD in the ring, start at the beginning again.
+ */
+ if (bdp->cbd_sc & BD_ENET_TX_WRAP)
+ bdp = cep->tx_bd_base;
+ else
+ bdp++;
+
+ if (bdp->cbd_sc & BD_ENET_TX_READY) {
+ netif_stop_queue(dev);
+ cep->tx_full = 1;
+ }
+
+ cep->cur_tx = (cbd_t *)bdp;
+
+ spin_unlock_irq(&cep->lock);
+
+ return 0;
+}
+
+static void
+scc_enet_timeout(struct net_device *dev)
+{
+ struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
+
+ printk("%s: transmit timed out.\n", dev->name);
+ cep->stats.tx_errors++;
+#ifndef final_version
+ {
+ int i;
+ cbd_t *bdp;
+ printk(" Ring data dump: cur_tx %p%s cur_rx %p.\n",
+ cep->cur_tx, cep->tx_full ? " (full)" : "",
+ cep->cur_rx);
+ bdp = cep->tx_bd_base;
+ for (i = 0 ; i < TX_RING_SIZE; i++, bdp++)
+ printk("%04x %04x %08x\n",
+ bdp->cbd_sc,
+ bdp->cbd_datlen,
+ bdp->cbd_bufaddr);
+ bdp = cep->rx_bd_base;
+ for (i = 0 ; i < RX_RING_SIZE; i++, bdp++)
+ printk("%04x %04x %08x\n",
+ bdp->cbd_sc,
+ bdp->cbd_datlen,
+ bdp->cbd_bufaddr);
+ }
+#endif
+ if (!cep->tx_full)
+ netif_wake_queue(dev);
+}
+
+/* The interrupt handler.
+ * This is called from the CPM handler, not the MPC core interrupt.
+ */
+static void
+scc_enet_interrupt(void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ volatile struct scc_enet_private *cep;
+ volatile cbd_t *bdp;
+ ushort int_events;
+ int must_restart;
+
+ cep = (struct scc_enet_private *)dev->priv;
+
+ /* Get the interrupt events that caused us to be here.
+ */
+ int_events = cep->sccp->scc_scce;
+ cep->sccp->scc_scce = int_events;
+ must_restart = 0;
+
+ /* Handle receive event in its own function.
+ */
+ if (int_events & SCCE_ENET_RXF)
+ scc_enet_rx(dev_id);
+
+ /* Check for a transmit error. The manual is a little unclear
+ * about this, so the debug code until I get it figured out. It
+ * appears that if TXE is set, then TXB is not set. However,
+ * if carrier sense is lost during frame transmission, the TXE
+ * bit is set, "and continues the buffer transmission normally."
+ * I don't know if "normally" implies TXB is set when the buffer
+ * descriptor is closed.....trial and error :-).
+ */
+
+ /* Transmit OK, or non-fatal error. Update the buffer descriptors.
+ */
+ if (int_events & (SCCE_ENET_TXE | SCCE_ENET_TXB)) {
+ spin_lock(&cep->lock);
+ bdp = cep->dirty_tx;
+ while ((bdp->cbd_sc&BD_ENET_TX_READY)==0) {
+ if ((bdp==cep->cur_tx) && (cep->tx_full == 0))
+ break;
+
+ if (bdp->cbd_sc & BD_ENET_TX_HB) /* No heartbeat */
+ cep->stats.tx_heartbeat_errors++;
+ if (bdp->cbd_sc & BD_ENET_TX_LC) /* Late collision */
+ cep->stats.tx_window_errors++;
+ if (bdp->cbd_sc & BD_ENET_TX_RL) /* Retrans limit */
+ cep->stats.tx_aborted_errors++;
+ if (bdp->cbd_sc & BD_ENET_TX_UN) /* Underrun */
+ cep->stats.tx_fifo_errors++;
+ if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */
+ cep->stats.tx_carrier_errors++;
+
+
+ /* No heartbeat or Lost carrier are not really bad errors.
+ * The others require a restart transmit command.
+ */
+ if (bdp->cbd_sc &
+ (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) {
+ must_restart = 1;
+ cep->stats.tx_errors++;
+ }
+
+ cep->stats.tx_packets++;
+
+ /* Deferred means some collisions occurred during transmit,
+ * but we eventually sent the packet OK.
+ */
+ if (bdp->cbd_sc & BD_ENET_TX_DEF)
+ cep->stats.collisions++;
+
+ /* Free the sk buffer associated with this last transmit.
+ */
+ dev_kfree_skb_irq(cep->tx_skbuff[cep->skb_dirty]);
+ cep->skb_dirty = (cep->skb_dirty + 1) & TX_RING_MOD_MASK;
+
+ /* Update pointer to next buffer descriptor to be transmitted.
+ */
+ if (bdp->cbd_sc & BD_ENET_TX_WRAP)
+ bdp = cep->tx_bd_base;
+ else
+ bdp++;
+
+ /* I don't know if we can be held off from processing these
+ * interrupts for more than one frame time. I really hope
+ * not. In such a case, we would now want to check the
+ * currently available BD (cur_tx) and determine if any
+ * buffers between the dirty_tx and cur_tx have also been
+ * sent. We would want to process anything in between that
+ * does not have BD_ENET_TX_READY set.
+ */
+
+ /* Since we have freed up a buffer, the ring is no longer
+ * full.
+ */
+ if (cep->tx_full) {
+ cep->tx_full = 0;
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+ }
+
+ cep->dirty_tx = (cbd_t *)bdp;
+ }
+
+ if (must_restart) {
+ volatile cpm8xx_t *cp;
+
+ /* Some transmit errors cause the transmitter to shut
+ * down. We now issue a restart transmit. Since the
+ * errors close the BD and update the pointers, the restart
+ * _should_ pick up without having to reset any of our
+ * pointers either.
+ */
+ cp = cpmp;
+ cp->cp_cpcr =
+ mk_cr_cmd(CPM_CR_ENET, CPM_CR_RESTART_TX) | CPM_CR_FLG;
+ while (cp->cp_cpcr & CPM_CR_FLG);
+ }
+ spin_unlock(&cep->lock);
+ }
+
+ /* Check for receive busy, i.e. packets coming but no place to
+ * put them. This "can't happen" because the receive interrupt
+ * is tossing previous frames.
+ */
+ if (int_events & SCCE_ENET_BSY) {
+ cep->stats.rx_dropped++;
+ printk("CPM ENET: BSY can't happen.\n");
+ }
+
+ return;
+}
+
+/* During a receive, the cur_rx points to the current incoming buffer.
+ * When we update through the ring, if the next incoming buffer has
+ * not been given to the system, we just set the empty indicator,
+ * effectively tossing the packet.
+ */
+static int
+scc_enet_rx(struct net_device *dev)
+{
+ struct scc_enet_private *cep;
+ volatile cbd_t *bdp;
+ struct sk_buff *skb;
+ ushort pkt_len;
+
+ cep = (struct scc_enet_private *)dev->priv;
+
+ /* First, grab all of the stats for the incoming packet.
+ * These get messed up if we get called due to a busy condition.
+ */
+ bdp = cep->cur_rx;
+
+for (;;) {
+ if (bdp->cbd_sc & BD_ENET_RX_EMPTY)
+ break;
+
+#ifndef final_version
+ /* Since we have allocated space to hold a complete frame, both
+ * the first and last indicators should be set.
+ */
+ if ((bdp->cbd_sc & (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) !=
+ (BD_ENET_RX_FIRST | BD_ENET_RX_LAST))
+ printk("CPM ENET: rcv is not first+last\n");
+#endif
+
+ /* Frame too long or too short.
+ */
+ if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
+ cep->stats.rx_length_errors++;
+ if (bdp->cbd_sc & BD_ENET_RX_NO) /* Frame alignment */
+ cep->stats.rx_frame_errors++;
+ if (bdp->cbd_sc & BD_ENET_RX_CR) /* CRC Error */
+ cep->stats.rx_crc_errors++;
+ if (bdp->cbd_sc & BD_ENET_RX_OV) /* FIFO overrun */
+ cep->stats.rx_crc_errors++;
+
+ /* Report late collisions as a frame error.
+ * On this error, the BD is closed, but we don't know what we
+ * have in the buffer. So, just drop this frame on the floor.
+ */
+ if (bdp->cbd_sc & BD_ENET_RX_CL) {
+ cep->stats.rx_frame_errors++;
+ }
+ else {
+
+ /* Process the incoming frame.
+ */
+ cep->stats.rx_packets++;
+ pkt_len = bdp->cbd_datlen;
+ cep->stats.rx_bytes += pkt_len;
+
+ /* This does 16 byte alignment, much more than we need.
+ * The packet length includes FCS, but we don't want to
+ * include that when passing upstream as it messes up
+ * bridging applications.
+ */
+ skb = dev_alloc_skb(pkt_len-4);
+
+ if (skb == NULL) {
+ printk("%s: Memory squeeze, dropping packet.\n", dev->name);
+ cep->stats.rx_dropped++;
+ }
+ else {
+ skb->dev = dev;
+ skb_put(skb,pkt_len-4); /* Make room */
+ eth_copy_and_sum(skb,
+ cep->rx_vaddr[bdp - cep->rx_bd_base],
+ pkt_len-4, 0);
+ skb->protocol=eth_type_trans(skb,dev);
+ netif_rx(skb);
+ }
+ }
+
+ /* Clear the status flags for this buffer.
+ */
+ bdp->cbd_sc &= ~BD_ENET_RX_STATS;
+
+ /* Mark the buffer empty.
+ */
+ bdp->cbd_sc |= BD_ENET_RX_EMPTY;
+
+ /* Update BD pointer to next entry.
+ */
+ if (bdp->cbd_sc & BD_ENET_RX_WRAP)
+ bdp = cep->rx_bd_base;
+ else
+ bdp++;
+
+ }
+ cep->cur_rx = (cbd_t *)bdp;
+
+ return 0;
+}
+
+static int
+scc_enet_close(struct net_device *dev)
+{
+ /* Don't know what to do yet.
+ */
+ netif_stop_queue(dev);
+
+ return 0;
+}
+
+static struct net_device_stats *scc_enet_get_stats(struct net_device *dev)
+{
+ struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
+
+ return &cep->stats;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+ * Skeleton taken from sunlance driver.
+ * The CPM Ethernet implementation allows Multicast as well as individual
+ * MAC address filtering. Some of the drivers check to make sure it is
+ * a group multicast address, and discard those that are not. I guess I
+ * will do the same for now, but just remove the test if you want
+ * individual filtering as well (do the upper net layers want or support
+ * this kind of feature?).
+ */
+
+static void set_multicast_list(struct net_device *dev)
+{
+ struct scc_enet_private *cep;
+ struct dev_mc_list *dmi;
+ u_char *mcptr, *tdptr;
+ volatile scc_enet_t *ep;
+ int i, j;
+ cep = (struct scc_enet_private *)dev->priv;
+
+ /* Get pointer to SCC area in parameter RAM.
+ */
+ ep = (scc_enet_t *)dev->base_addr;
+
+ if (dev->flags&IFF_PROMISC) {
+
+ /* Log any net taps. */
+ printk("%s: Promiscuous mode enabled.\n", dev->name);
+ cep->sccp->scc_psmr |= SCC_PSMR_PRO;
+ } else {
+
+ cep->sccp->scc_psmr &= ~SCC_PSMR_PRO;
+
+ if (dev->flags & IFF_ALLMULTI) {
+ /* Catch all multicast addresses, so set the
+ * filter to all 1's.
+ */
+ ep->sen_gaddr1 = 0xffff;
+ ep->sen_gaddr2 = 0xffff;
+ ep->sen_gaddr3 = 0xffff;
+ ep->sen_gaddr4 = 0xffff;
+ }
+ else {
+ /* Clear filter and add the addresses in the list.
+ */
+ ep->sen_gaddr1 = 0;
+ ep->sen_gaddr2 = 0;
+ ep->sen_gaddr3 = 0;
+ ep->sen_gaddr4 = 0;
+
+ dmi = dev->mc_list;
+
+ for (i=0; i<dev->mc_count; i++) {
+
+ /* Only support group multicast for now.
+ */
+ if (!(dmi->dmi_addr[0] & 1))
+ continue;
+
+ /* The address in dmi_addr is LSB first,
+ * and taddr is MSB first. We have to
+ * copy bytes MSB first from dmi_addr.
+ */
+ mcptr = (u_char *)dmi->dmi_addr + 5;
+ tdptr = (u_char *)&ep->sen_taddrh;
+ for (j=0; j<6; j++)
+ *tdptr++ = *mcptr--;
+
+ /* Ask CPM to run CRC and set bit in
+ * filter mask.
+ */
+ cpmp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_SET_GADDR) | CPM_CR_FLG;
+ /* this delay is necessary here -- Cort */
+ udelay(10);
+ while (cpmp->cp_cpcr & CPM_CR_FLG);
+ }
+ }
+ }
+}
+
+/* Initialize the CPM Ethernet on SCC. If EPPC-Bug loaded us, or performed
+ * some other network I/O, a whole bunch of this has already been set up.
+ * It is no big deal if we do it again, we just have to disable the
+ * transmit and receive to make sure we don't catch the CPM with some
+ * inconsistent control information.
+ */
+static int __init scc_enet_init(void)
+{
+ struct net_device *dev;
+ struct scc_enet_private *cep;
+ int i, j, k, err;
+ uint dp_offset;
+ unsigned char *eap, *ba;
+ dma_addr_t mem_addr;
+ bd_t *bd;
+ volatile cbd_t *bdp;
+ volatile cpm8xx_t *cp;
+ volatile scc_t *sccp;
+ volatile scc_enet_t *ep;
+ volatile immap_t *immap;
+
+ cp = cpmp; /* Get pointer to Communication Processor */
+
+ immap = (immap_t *)(mfspr(SPRN_IMMR) & 0xFFFF0000); /* and to internal registers */
+
+ bd = (bd_t *)__res;
+
+ dev = alloc_etherdev(sizeof(*cep));
+ if (!dev)
+ return -ENOMEM;
+
+ cep = dev->priv;
+ spin_lock_init(&cep->lock);
+
+ /* Get pointer to SCC area in parameter RAM.
+ */
+ ep = (scc_enet_t *)(&cp->cp_dparam[PROFF_ENET]);
+
+ /* And another to the SCC register area.
+ */
+ sccp = (volatile scc_t *)(&cp->cp_scc[SCC_ENET]);
+ cep->sccp = (scc_t *)sccp; /* Keep the pointer handy */
+
+ /* Disable receive and transmit in case EPPC-Bug started it.
+ */
+ sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ /* Cookbook style from the MPC860 manual.....
+ * Not all of this is necessary if EPPC-Bug has initialized
+ * the network.
+ * So far we are lucky, all board configurations use the same
+ * pins, or at least the same I/O Port for these functions.....
+ * It can't last though......
+ */
+
+#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
+ /* Configure port A pins for Txd and Rxd.
+ */
+ immap->im_ioport.iop_papar |= (PA_ENET_RXD | PA_ENET_TXD);
+ immap->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
+ immap->im_ioport.iop_paodr &= ~PA_ENET_TXD;
+#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
+ /* Configure port B pins for Txd and Rxd.
+ */
+ immap->im_cpm.cp_pbpar |= (PB_ENET_RXD | PB_ENET_TXD);
+ immap->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
+ immap->im_cpm.cp_pbodr &= ~PB_ENET_TXD;
+#else
+#error Exactly ONE pair of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
+#endif
+
+#if defined(PC_ENET_LBK)
+ /* Configure port C pins to disable External Loopback
+ */
+ immap->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
+ immap->im_ioport.iop_pcdir |= PC_ENET_LBK;
+ immap->im_ioport.iop_pcso &= ~PC_ENET_LBK;
+ immap->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */
+#endif /* PC_ENET_LBK */
+
+ /* Configure port C pins to enable CLSN and RENA.
+ */
+ immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+ immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+ immap->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
+
+ /* Configure port A for TCLK and RCLK.
+ */
+ immap->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
+ immap->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
+
+ /* Configure Serial Interface clock routing.
+ * First, clear all SCC bits to zero, then set the ones we want.
+ */
+ cp->cp_sicr &= ~SICR_ENET_MASK;
+ cp->cp_sicr |= SICR_ENET_CLKRT;
+
+ /* Manual says set SDDR, but I can't find anything with that
+ * name. I think it is a misprint, and should be SDCR. This
+ * has already been set by the communication processor initialization.
+ */
+
+ /* Allocate space for the buffer descriptors in the DP ram.
+ * These are relative offsets in the DP ram address space.
+ * Initialize base addresses for the buffer descriptors.
+ */
+ dp_offset = cpm_dpalloc(sizeof(cbd_t) * RX_RING_SIZE, 8);
+ ep->sen_genscc.scc_rbase = dp_offset;
+ cep->rx_bd_base = cpm_dpram_addr(dp_offset);
+
+ dp_offset = cpm_dpalloc(sizeof(cbd_t) * TX_RING_SIZE, 8);
+ ep->sen_genscc.scc_tbase = dp_offset;
+ cep->tx_bd_base = cpm_dpram_addr(dp_offset);
+
+ cep->dirty_tx = cep->cur_tx = cep->tx_bd_base;
+ cep->cur_rx = cep->rx_bd_base;
+
+ /* Issue init Rx BD command for SCC.
+ * Manual says to perform an Init Rx parameters here. We have
+ * to perform both Rx and Tx because the SCC may have been
+ * already running.
+ * In addition, we have to do it later because we don't yet have
+ * all of the BD control/status set properly.
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_INIT_RX) | CPM_CR_FLG;
+ while (cp->cp_cpcr & CPM_CR_FLG);
+ */
+
+ /* Initialize function code registers for big-endian.
+ */
+ ep->sen_genscc.scc_rfcr = SCC_EB;
+ ep->sen_genscc.scc_tfcr = SCC_EB;
+
+ /* Set maximum bytes per receive buffer.
+ * This appears to be an Ethernet frame size, not the buffer
+ * fragment size. It must be a multiple of four.
+ */
+ ep->sen_genscc.scc_mrblr = PKT_MAXBLR_SIZE;
+
+ /* Set CRC preset and mask.
+ */
+ ep->sen_cpres = 0xffffffff;
+ ep->sen_cmask = 0xdebb20e3;
+
+ ep->sen_crcec = 0; /* CRC Error counter */
+ ep->sen_alec = 0; /* alignment error counter */
+ ep->sen_disfc = 0; /* discard frame counter */
+
+ ep->sen_pads = 0x8888; /* Tx short frame pad character */
+ ep->sen_retlim = 15; /* Retry limit threshold */
+
+ ep->sen_maxflr = PKT_MAXBUF_SIZE; /* maximum frame length register */
+ ep->sen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register */
+
+ ep->sen_maxd1 = PKT_MAXBLR_SIZE; /* maximum DMA1 length */
+ ep->sen_maxd2 = PKT_MAXBLR_SIZE; /* maximum DMA2 length */
+
+ /* Clear hash tables.
+ */
+ ep->sen_gaddr1 = 0;
+ ep->sen_gaddr2 = 0;
+ ep->sen_gaddr3 = 0;
+ ep->sen_gaddr4 = 0;
+ ep->sen_iaddr1 = 0;
+ ep->sen_iaddr2 = 0;
+ ep->sen_iaddr3 = 0;
+ ep->sen_iaddr4 = 0;
+
+ /* Set Ethernet station address.
+ */
+ eap = (unsigned char *)&(ep->sen_paddrh);
+ for (i=5; i>=0; i--)
+ *eap++ = dev->dev_addr[i] = bd->bi_enetaddr[i];
+
+ ep->sen_pper = 0; /* 'cause the book says so */
+ ep->sen_taddrl = 0; /* temp address (LSB) */
+ ep->sen_taddrm = 0;
+ ep->sen_taddrh = 0; /* temp address (MSB) */
+
+ /* Now allocate the host memory pages and initialize the
+ * buffer descriptors.
+ */
+ bdp = cep->tx_bd_base;
+ for (i=0; i<TX_RING_SIZE; i++) {
+
+ /* Initialize the BD for every fragment in the page.
+ */
+ bdp->cbd_sc = 0;
+ bdp->cbd_bufaddr = 0;
+ bdp++;
+ }
+
+ /* Set the last buffer to wrap.
+ */
+ bdp--;
+ bdp->cbd_sc |= BD_SC_WRAP;
+
+ bdp = cep->rx_bd_base;
+ k = 0;
+ for (i=0; i<CPM_ENET_RX_PAGES; i++) {
+
+ /* Allocate a page.
+ */
+ ba = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE,
+ &mem_addr, GFP_KERNEL);
+ /* BUG: no check for failure */
+
+ /* Initialize the BD for every fragment in the page.
+ */
+ for (j=0; j<CPM_ENET_RX_FRPPG; j++) {
+ bdp->cbd_sc = BD_ENET_RX_EMPTY | BD_ENET_RX_INTR;
+ bdp->cbd_bufaddr = mem_addr;
+ cep->rx_vaddr[k++] = ba;
+ mem_addr += CPM_ENET_RX_FRSIZE;
+ ba += CPM_ENET_RX_FRSIZE;
+ bdp++;
+ }
+ }
+
+ /* Set the last buffer to wrap.
+ */
+ bdp--;
+ bdp->cbd_sc |= BD_SC_WRAP;
+
+ /* Let's re-initialize the channel now. We have to do it later
+ * than the manual describes because we have just now finished
+ * the BD initialization.
+ */
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+ while (cp->cp_cpcr & CPM_CR_FLG);
+
+ cep->skb_cur = cep->skb_dirty = 0;
+
+ sccp->scc_scce = 0xffff; /* Clear any pending events */
+
+ /* Enable interrupts for transmit error, complete frame
+ * received, and any transmit buffer we have also set the
+ * interrupt flag.
+ */
+ sccp->scc_sccm = (SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB);
+
+ /* Install our interrupt handler.
+ */
+ cpm_install_handler(CPMVEC_ENET, scc_enet_interrupt, dev);
+
+ /* Set GSMR_H to enable all normal operating modes.
+ * Set GSMR_L to enable Ethernet to MC68160.
+ */
+ sccp->scc_gsmrh = 0;
+ sccp->scc_gsmrl = (SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 | SCC_GSMRL_TPP_10 | SCC_GSMRL_MODE_ENET);
+
+ /* Set sync/delimiters.
+ */
+ sccp->scc_dsr = 0xd555;
+
+ /* Set processing mode. Use Ethernet CRC, catch broadcast, and
+ * start frame search 22 bit times after RENA.
+ */
+ sccp->scc_psmr = (SCC_PSMR_ENCRC | SCC_PSMR_NIB22);
+
+ /* It is now OK to enable the Ethernet transmitter.
+ * Unfortunately, there are board implementation differences here.
+ */
+#if (!defined (PB_ENET_TENA) && defined (PC_ENET_TENA))
+ immap->im_ioport.iop_pcpar |= PC_ENET_TENA;
+ immap->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
+#elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA))
+ cp->cp_pbpar |= PB_ENET_TENA;
+ cp->cp_pbdir |= PB_ENET_TENA;
+#else
+#error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA
+#endif
+
+#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
+ /* And while we are here, set the configuration to enable ethernet.
+ */
+ *((volatile uint *)RPX_CSR_ADDR) &= ~BCSR0_ETHLPBK;
+ *((volatile uint *)RPX_CSR_ADDR) |=
+ (BCSR0_ETHEN | BCSR0_COLTESTDIS | BCSR0_FULLDPLXDIS);
+#endif
+
+#ifdef CONFIG_BSEIP
+ /* BSE uses port B and C for PHY control.
+ */
+ cp->cp_pbpar &= ~(PB_BSE_POWERUP | PB_BSE_FDXDIS);
+ cp->cp_pbdir |= (PB_BSE_POWERUP | PB_BSE_FDXDIS);
+ cp->cp_pbdat |= (PB_BSE_POWERUP | PB_BSE_FDXDIS);
+
+ immap->im_ioport.iop_pcpar &= ~PC_BSE_LOOPBACK;
+ immap->im_ioport.iop_pcdir |= PC_BSE_LOOPBACK;
+ immap->im_ioport.iop_pcso &= ~PC_BSE_LOOPBACK;
+ immap->im_ioport.iop_pcdat &= ~PC_BSE_LOOPBACK;
+#endif
+
+#ifdef CONFIG_FADS
+ cp->cp_pbpar |= PB_ENET_TENA;
+ cp->cp_pbdir |= PB_ENET_TENA;
+
+ /* Enable the EEST PHY.
+ */
+ *((volatile uint *)BCSR1) &= ~BCSR1_ETHEN;
+#endif
+
+ dev->base_addr = (unsigned long)ep;
+#if 0
+ dev->name = "CPM_ENET";
+#endif
+
+ /* The CPM Ethernet specific entries in the device structure. */
+ dev->open = scc_enet_open;
+ dev->hard_start_xmit = scc_enet_start_xmit;
+ dev->tx_timeout = scc_enet_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ dev->stop = scc_enet_close;
+ dev->get_stats = scc_enet_get_stats;
+ dev->set_multicast_list = set_multicast_list;
+
+ err = register_netdev(dev);
+ if (err) {
+ free_netdev(dev);
+ return err;
+ }
+
+ /* And last, enable the transmit and receive processing.
+ */
+ sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ printk("%s: CPM ENET Version 0.2 on SCC%d, ", dev->name, SCC_ENET+1);
+ for (i=0; i<5; i++)
+ printk("%02x:", dev->dev_addr[i]);
+ printk("%02x\n", dev->dev_addr[5]);
+
+ return 0;
+}
+
+module_init(scc_enet_init);