diff options
Diffstat (limited to 'arch/ppc64/kernel/maple_pci.c')
| -rw-r--r-- | arch/ppc64/kernel/maple_pci.c | 520 |
1 files changed, 0 insertions, 520 deletions
diff --git a/arch/ppc64/kernel/maple_pci.c b/arch/ppc64/kernel/maple_pci.c deleted file mode 100644 index 633324b5e61..00000000000 --- a/arch/ppc64/kernel/maple_pci.c +++ /dev/null @@ -1,520 +0,0 @@ -/* - * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), - * IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#define DEBUG - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/bootmem.h> - -#include <asm/sections.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/pci-bridge.h> -#include <asm/machdep.h> -#include <asm/iommu.h> -#include <asm/ppc-pci.h> - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -static struct pci_controller *u3_agp, *u3_ht; - -static int __init fixup_one_level_bus_range(struct device_node *node, int higher) -{ - for (; node != 0;node = node->sibling) { - int * bus_range; - unsigned int *class_code; - int len; - - /* For PCI<->PCI bridges or CardBus bridges, we go down */ - class_code = (unsigned int *) get_property(node, "class-code", NULL); - if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && - (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) - continue; - bus_range = (int *) get_property(node, "bus-range", &len); - if (bus_range != NULL && len > 2 * sizeof(int)) { - if (bus_range[1] > higher) - higher = bus_range[1]; - } - higher = fixup_one_level_bus_range(node->child, higher); - } - return higher; -} - -/* This routine fixes the "bus-range" property of all bridges in the - * system since they tend to have their "last" member wrong on macs - * - * Note that the bus numbers manipulated here are OF bus numbers, they - * are not Linux bus numbers. - */ -static void __init fixup_bus_range(struct device_node *bridge) -{ - int * bus_range; - int len; - - /* Lookup the "bus-range" property for the hose */ - bus_range = (int *) get_property(bridge, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s\n", - bridge->full_name); - return; - } - bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); -} - - -#define U3_AGP_CFA0(devfn, off) \ - ((1 << (unsigned long)PCI_SLOT(dev_fn)) \ - | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \ - | (((unsigned long)(off)) & 0xFCUL)) - -#define U3_AGP_CFA1(bus, devfn, off) \ - ((((unsigned long)(bus)) << 16) \ - |(((unsigned long)(devfn)) << 8) \ - |(((unsigned long)(off)) & 0xFCUL) \ - |1UL) - -static unsigned long u3_agp_cfg_access(struct pci_controller* hose, - u8 bus, u8 dev_fn, u8 offset) -{ - unsigned int caddr; - - if (bus == hose->first_busno) { - if (dev_fn < (11 << 3)) - return 0; - caddr = U3_AGP_CFA0(dev_fn, offset); - } else - caddr = U3_AGP_CFA1(bus, dev_fn, offset); - - /* Uninorth will return garbage if we don't read back the value ! */ - do { - out_le32(hose->cfg_addr, caddr); - } while (in_le32(hose->cfg_addr) != caddr); - - offset &= 0x07; - return ((unsigned long)hose->cfg_data) + offset; -} - -static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 *val) -{ - struct pci_controller *hose; - unsigned long addr; - - hose = pci_bus_to_host(bus); - if (hose == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - - addr = u3_agp_cfg_access(hose, bus->number, devfn, offset); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - switch (len) { - case 1: - *val = in_8((u8 *)addr); - break; - case 2: - *val = in_le16((u16 *)addr); - break; - default: - *val = in_le32((u32 *)addr); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 val) -{ - struct pci_controller *hose; - unsigned long addr; - - hose = pci_bus_to_host(bus); - if (hose == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - - addr = u3_agp_cfg_access(hose, bus->number, devfn, offset); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - switch (len) { - case 1: - out_8((u8 *)addr, val); - (void) in_8((u8 *)addr); - break; - case 2: - out_le16((u16 *)addr, val); - (void) in_le16((u16 *)addr); - break; - default: - out_le32((u32 *)addr, val); - (void) in_le32((u32 *)addr); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops u3_agp_pci_ops = -{ - u3_agp_read_config, - u3_agp_write_config -}; - - -#define U3_HT_CFA0(devfn, off) \ - ((((unsigned long)devfn) << 8) | offset) -#define U3_HT_CFA1(bus, devfn, off) \ - (U3_HT_CFA0(devfn, off) \ - + (((unsigned long)bus) << 16) \ - + 0x01000000UL) - -static unsigned long u3_ht_cfg_access(struct pci_controller* hose, - u8 bus, u8 devfn, u8 offset) -{ - if (bus == hose->first_busno) { - if (PCI_SLOT(devfn) == 0) - return 0; - return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset); - } else - return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset); -} - -static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 *val) -{ - struct pci_controller *hose; - unsigned long addr; - - hose = pci_bus_to_host(bus); - if (hose == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - - addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - switch (len) { - case 1: - *val = in_8((u8 *)addr); - break; - case 2: - *val = in_le16((u16 *)addr); - break; - default: - *val = in_le32((u32 *)addr); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 val) -{ - struct pci_controller *hose; - unsigned long addr; - - hose = pci_bus_to_host(bus); - if (hose == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - - addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - switch (len) { - case 1: - out_8((u8 *)addr, val); - (void) in_8((u8 *)addr); - break; - case 2: - out_le16((u16 *)addr, val); - (void) in_le16((u16 *)addr); - break; - default: - out_le32((u32 *)addr, val); - (void) in_le32((u32 *)addr); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops u3_ht_pci_ops = -{ - u3_ht_read_config, - u3_ht_write_config -}; - -static void __init setup_u3_agp(struct pci_controller* hose) -{ - /* On G5, we move AGP up to high bus number so we don't need - * to reassign bus numbers for HT. If we ever have P2P bridges - * on AGP, we'll have to move pci_assign_all_buses to the - * pci_controller structure so we enable it for AGP and not for - * HT childs. - * We hard code the address because of the different size of - * the reg address cell, we shall fix that by killing struct - * reg_property and using some accessor functions instead - */ - hose->first_busno = 0xf0; - hose->last_busno = 0xff; - hose->ops = &u3_agp_pci_ops; - hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); - hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); - - u3_agp = hose; -} - -static void __init setup_u3_ht(struct pci_controller* hose) -{ - hose->ops = &u3_ht_pci_ops; - - /* We hard code the address because of the different size of - * the reg address cell, we shall fix that by killing struct - * reg_property and using some accessor functions instead - */ - hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); - - hose->first_busno = 0; - hose->last_busno = 0xef; - - u3_ht = hose; -} - -static int __init add_bridge(struct device_node *dev) -{ - int len; - struct pci_controller *hose; - char* disp_name; - int *bus_range; - int primary = 1; - struct property *of_prop; - - DBG("Adding PCI host bridge %s\n", dev->full_name); - - bus_range = (int *) get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", - dev->full_name); - } - - hose = alloc_bootmem(sizeof(struct pci_controller)); - if (hose == NULL) - return -ENOMEM; - pci_setup_pci_controller(hose); - - hose->arch_data = dev; - hose->first_busno = bus_range ? bus_range[0] : 0; - hose->last_busno = bus_range ? bus_range[1] : 0xff; - - of_prop = alloc_bootmem(sizeof(struct property) + - sizeof(hose->global_number)); - if (of_prop) { - memset(of_prop, 0, sizeof(struct property)); - of_prop->name = "linux,pci-domain"; - of_prop->length = sizeof(hose->global_number); - of_prop->value = (unsigned char *)&of_prop[1]; - memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number)); - prom_add_property(dev, of_prop); - } - - disp_name = NULL; - if (device_is_compatible(dev, "u3-agp")) { - setup_u3_agp(hose); - disp_name = "U3-AGP"; - primary = 0; - } else if (device_is_compatible(dev, "u3-ht")) { - setup_u3_ht(hose); - disp_name = "U3-HT"; - primary = 1; - } - printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", - disp_name, hose->first_busno, hose->last_busno); - - /* Interpret the "ranges" property */ - /* This also maps the I/O region and sets isa_io/mem_base */ - pci_process_bridge_OF_ranges(hose, dev, primary); - pci_setup_phb_io(hose, primary); - - /* Fixup "bus-range" OF property */ - fixup_bus_range(dev); - - return 0; -} - - -void __init maple_pcibios_fixup(void) -{ - struct pci_dev *dev = NULL; - - DBG(" -> maple_pcibios_fixup\n"); - - for_each_pci_dev(dev) - pci_read_irq_line(dev); - - /* Do the mapping of the IO space */ - phbs_remap_io(); - - DBG(" <- maple_pcibios_fixup\n"); -} - -static void __init maple_fixup_phb_resources(void) -{ - struct pci_controller *hose, *tmp; - - list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { - unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base; - hose->io_resource.start += offset; - hose->io_resource.end += offset; - printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n", - hose->global_number, - hose->io_resource.start, hose->io_resource.end); - } -} - -void __init maple_pci_init(void) -{ - struct device_node *np, *root; - struct device_node *ht = NULL; - - /* Probe root PCI hosts, that is on U3 the AGP host and the - * HyperTransport host. That one is actually "kept" around - * and actually added last as it's resource management relies - * on the AGP resources to have been setup first - */ - root = of_find_node_by_path("/"); - if (root == NULL) { - printk(KERN_CRIT "maple_find_bridges: can't find root of device tree\n"); - return; - } - for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { - if (np->name == NULL) - continue; - if (strcmp(np->name, "pci") == 0) { - if (add_bridge(np) == 0) - of_node_get(np); - } - if (strcmp(np->name, "ht") == 0) { - of_node_get(np); - ht = np; - } - } - of_node_put(root); - - /* Now setup the HyperTransport host if we found any - */ - if (ht && add_bridge(ht) != 0) - of_node_put(ht); - - /* Fixup the IO resources on our host bridges as the common code - * does it only for childs of the host bridges - */ - maple_fixup_phb_resources(); - - /* Setup the linkage between OF nodes and PHBs */ - pci_devs_phb_init(); - - /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We - * assume there is no P2P bridge on the AGP bus, which should be a - * safe assumptions hopefully. - */ - if (u3_agp) { - struct device_node *np = u3_agp->arch_data; - PCI_DN(np)->busno = 0xf0; - for (np = np->child; np; np = np->sibling) - PCI_DN(np)->busno = 0xf0; - } - - /* Tell pci.c to use the common resource allocation mecanism */ - pci_probe_only = 0; - - /* Allow all IO */ - io_page_mask = -1; -} - -int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) -{ - struct device_node *np; - int irq = channel ? 15 : 14; - - if (pdev->vendor != PCI_VENDOR_ID_AMD || - pdev->device != PCI_DEVICE_ID_AMD_8111_IDE) - return irq; - - np = pci_device_to_OF_node(pdev); - if (np == NULL) - return irq; - if (np->n_intrs < 2) - return irq; - return np->intrs[channel & 0x1].line; -} - -/* XXX: To remove once all firmwares are ok */ -static void fixup_maple_ide(struct pci_dev* dev) -{ -#if 0 /* Enable this to enable IDE port 0 */ - { - u8 v; - - pci_read_config_byte(dev, 0x40, &v); - v |= 2; - pci_write_config_byte(dev, 0x40, v); - } -#endif -#if 0 /* fix bus master base */ - pci_write_config_dword(dev, 0x20, 0xcc01); - printk("old ide resource: %lx -> %lx \n", - dev->resource[4].start, dev->resource[4].end); - dev->resource[4].start = 0xcc00; - dev->resource[4].end = 0xcc10; -#endif -#if 1 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */ - { - struct pci_dev *apicdev; - u32 v; - - apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0)); - if (apicdev == NULL) - printk("IDE Fixup IRQ: Can't find IO-APIC !\n"); - else { - pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14); - pci_read_config_dword(apicdev, 0xf4, &v); - v &= ~0x00000022; - pci_write_config_dword(apicdev, 0xf4, v); - pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15); - pci_read_config_dword(apicdev, 0xf4, &v); - v &= ~0x00000022; - pci_write_config_dword(apicdev, 0xf4, v); - pci_dev_put(apicdev); - } - } -#endif -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE, - fixup_maple_ide); |