aboutsummaryrefslogtreecommitdiff
path: root/arch/s390/kernel/head.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/s390/kernel/head.S')
-rw-r--r--arch/s390/kernel/head.S383
1 files changed, 34 insertions, 349 deletions
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 039354d7234..d31a97c89f6 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -1,11 +1,12 @@
/*
* arch/s390/kernel/head.S
*
- * S390 version
- * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Hartmut Penner (hp@de.ibm.com),
- * Martin Schwidefsky (schwidefsky@de.ibm.com),
- * Rob van der Heij (rvdhei@iae.nl)
+ * (C) Copyright IBM Corp. 1999, 2005
+ *
+ * Author(s): Hartmut Penner <hp@de.ibm.com>
+ * Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Rob van der Heij <rvdhei@iae.nl>
+ * Heiko Carstens <heiko.carstens@de.ibm.com>
*
* There are 5 different IPL methods
* 1) load the image directly into ram at address 0 and do an PSW restart
@@ -19,12 +20,7 @@
* 5) direct call of start by the SALIPL loader
* We use the cpuid to distinguish between VM and native ipl
* params for kernel are pushed to 0x10400 (see setup.h)
-
- Changes:
- Okt 25 2000 <rvdheij@iae.nl>
- added code to skip HDR and EOF to allow SL tape IPL (5 retries)
- changed first CCW from rewind to backspace block
-
+ *
*/
#include <linux/config.h>
@@ -34,6 +30,12 @@
#include <asm/thread_info.h>
#include <asm/page.h>
+#ifdef CONFIG_ARCH_S390X
+#define ARCH_OFFSET 4
+#else
+#define ARCH_OFFSET 0
+#endif
+
#ifndef CONFIG_IPL
.org 0
.long 0x00080000,0x80000000+startup # Just a restart PSW
@@ -201,7 +203,7 @@
ssch 0(%r3) # load chunk of 1600 bytes
bnz .Llderr
.Lwait4irq:
- mvc __LC_IO_NEW_PSW(8),.Lnewpsw # set up IO interrupt psw
+ mvc 0x78(8),.Lnewpsw # set up IO interrupt psw
lpsw .Lwaitpsw
.Lioint:
c %r1,0xb8 # compare subchannel number
@@ -265,13 +267,13 @@ iplstart:
la %r2,IPL_BS # load start address
bas %r14,.Lloader # load rest of ipl image
l %r12,.Lparm # pointer to parameter area
- st %r1,IPL_DEVICE-PARMAREA(%r12) # store ipl device number
+ st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number
#
# load parameter file from ipl device
#
.Lagain1:
- l %r2,INITRD_START-PARMAREA(%r12) # use ramdisk location as temp
+ l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # ramdisk loc. is temp
bas %r14,.Lloader # load parameter file
ltr %r2,%r2 # got anything ?
bz .Lnopf
@@ -279,7 +281,7 @@ iplstart:
bnh .Lnotrunc
la %r2,895
.Lnotrunc:
- l %r4,INITRD_START-PARMAREA(%r12)
+ l %r4,INITRD_START+ARCH_OFFSET-PARMAREA(%r12)
clc 0(3,%r4),.L_hdr # if it is HDRx
bz .Lagain1 # skip dataset header
clc 0(3,%r4),.L_eof # if it is EOFx
@@ -322,14 +324,14 @@ iplstart:
# load ramdisk from ipl device
#
.Lagain2:
- l %r2,INITRD_START-PARMAREA(%r12) # load adr. of ramdisk
+ l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # addr of ramdisk
bas %r14,.Lloader # load ramdisk
- st %r2,INITRD_SIZE-PARMAREA(%r12) # store size of ramdisk
+ st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of ramdisk
ltr %r2,%r2
bnz .Lrdcont
- st %r2,INITRD_START-PARMAREA(%r12) # no ramdisk found, null it
+ st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found
.Lrdcont:
- l %r2,INITRD_START-PARMAREA(%r12)
+ l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12)
clc 0(3,%r2),.L_hdr # skip HDRx and EOFx
bz .Lagain2
@@ -432,10 +434,10 @@ start:
la %r3,1(%r3)
.done:
l %r1,.memsize
- st %r3,0(%r1)
+ st %r3,ARCH_OFFSET(%r1)
slr %r0,%r0
- st %r0,INITRD_SIZE-PARMAREA(%r11)
- st %r0,INITRD_START-PARMAREA(%r11)
+ st %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11)
+ st %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11)
j startup # continue with startup
.tbl: .long _ebcasc # translate table
.cmd: .long COMMAND_LINE # address of command line buffer
@@ -478,304 +480,23 @@ start:
.byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7
.byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff
-#
-# startup-code at 0x10000, running in real mode
-# this is called either by the ipl loader or directly by PSW restart
-# or linload or SALIPL
-#
- .org 0x10000
-startup:basr %r13,0 # get base
-.LPG1: l %r1, .Lget_ipl_device_addr-.LPG1(%r13)
- basr %r14, %r1
- lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
- la %r12,_pstart-.LPG1(%r13) # pointer to parameter area
- # move IPL device to lowcore
- mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12)
-
-#
-# clear bss memory
-#
- l %r2,.Lbss_bgn-.LPG1(%r13) # start of bss
- l %r3,.Lbss_end-.LPG1(%r13) # end of bss
- sr %r3,%r2 # length of bss
- sr %r4,%r4 #
- sr %r5,%r5 # set src,length and pad to zero
- sr %r0,%r0 #
- mvcle %r2,%r4,0 # clear mem
- jo .-4 # branch back, if not finish
-
- l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word
-.Lservicecall:
- stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts
-
- stctl %r0, %r0,.Lcr-.LPG1(%r13) # get cr0
- la %r1,0x200 # set bit 22
- o %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1
- st %r1,.Lcr-.LPG1(%r13)
- lctl %r0, %r0,.Lcr-.LPG1(%r13) # load modified cr0
-
- mvc __LC_EXT_NEW_PSW(8),.Lpcext-.LPG1(%r13) # set postcall psw
- la %r1, .Lsclph-.LPG1(%r13)
- a %r1,__LC_EXT_NEW_PSW+4 # set handler
- st %r1,__LC_EXT_NEW_PSW+4
-
- la %r4,_pstart-.LPG1(%r13) # %r4 is our index for sccb stuff
- la %r1, .Lsccb-PARMAREA(%r4) # our sccb
- .insn rre,0xb2200000,%r2,%r1 # service call
- ipm %r1
- srl %r1,28 # get cc code
- xr %r3, %r3
- chi %r1,3
- be .Lfchunk-.LPG1(%r13) # leave
- chi %r1,2
- be .Lservicecall-.LPG1(%r13)
- lpsw .Lwaitsclp-.LPG1(%r13)
-.Lsclph:
- lh %r1,.Lsccbr-PARMAREA(%r4)
- chi %r1,0x10 # 0x0010 is the sucess code
- je .Lprocsccb # let's process the sccb
- chi %r1,0x1f0
- bne .Lfchunk-.LPG1(%r13) # unhandled error code
- c %r2, .Lrcp-.LPG1(%r13) # Did we try Read SCP forced
- bne .Lfchunk-.LPG1(%r13) # if no, give up
- l %r2, .Lrcp2-.LPG1(%r13) # try with Read SCP
- b .Lservicecall-.LPG1(%r13)
-.Lprocsccb:
- lhi %r1,0
- icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0
- jnz .Lscnd
- lhi %r1,0x800 # otherwise report 2GB
-.Lscnd:
- lhi %r3,0x800 # limit reported memory size to 2GB
- cr %r1,%r3
- jl .Lno2gb
- lr %r1,%r3
-.Lno2gb:
- xr %r3,%r3 # same logic
- ic %r3,.Lscpa1-PARMAREA(%r4)
- chi %r3,0x00
- jne .Lcompmem
- l %r3,.Lscpa2-PARMAREA(%r13)
-.Lcompmem:
- mr %r2,%r1 # mem in MB on 128-bit
- l %r1,.Lonemb-.LPG1(%r13)
- mr %r2,%r1 # mem size in bytes in %r3
- b .Lfchunk-.LPG1(%r13)
-
- .align 4
-.Lget_ipl_device_addr:
- .long .Lget_ipl_device
-.Lpmask:
- .byte 0
-.align 8
-.Lpcext:.long 0x00080000,0x80000000
-.Lcr:
- .long 0x00 # place holder for cr0
-.Lwaitsclp:
- .long 0x020A0000
- .long .Lsclph
-.Lrcp:
- .int 0x00120001 # Read SCP forced code
-.Lrcp2:
- .int 0x00020001 # Read SCP code
-.Lonemb:
- .int 0x100000
-.Lfchunk:
-
-#
-# find memory chunks.
-#
- lr %r9,%r3 # end of mem
- mvc __LC_PGM_NEW_PSW(8),.Lpcmem-.LPG1(%r13)
- la %r1,1 # test in increments of 128KB
- sll %r1,17
- l %r3,.Lmchunk-.LPG1(%r13) # get pointer to memory_chunk array
- slr %r4,%r4 # set start of chunk to zero
- slr %r5,%r5 # set end of chunk to zero
- slr %r6,%r6 # set access code to zero
- la %r10, MEMORY_CHUNKS # number of chunks
-.Lloop:
- tprot 0(%r5),0 # test protection of first byte
- ipm %r7
- srl %r7,28
- clr %r6,%r7 # compare cc with last access code
- be .Lsame-.LPG1(%r13)
- b .Lchkmem-.LPG1(%r13)
-.Lsame:
- ar %r5,%r1 # add 128KB to end of chunk
- bno .Lloop-.LPG1(%r13) # r1 < 0x80000000 -> loop
-.Lchkmem: # > 2GB or tprot got a program check
- clr %r4,%r5 # chunk size > 0?
- be .Lchkloop-.LPG1(%r13)
- st %r4,0(%r3) # store start address of chunk
- lr %r0,%r5
- slr %r0,%r4
- st %r0,4(%r3) # store size of chunk
- st %r6,8(%r3) # store type of chunk
- la %r3,12(%r3)
- l %r4,.Lmemsize-.LPG1(%r13) # address of variable memory_size
- st %r5,0(%r4) # store last end to memory size
- ahi %r10,-1 # update chunk number
-.Lchkloop:
- lr %r6,%r7 # set access code to last cc
- # we got an exception or we're starting a new
- # chunk , we must check if we should
- # still try to find valid memory (if we detected
- # the amount of available storage), and if we
- # have chunks left
- xr %r0,%r0
- clr %r0,%r9 # did we detect memory?
- je .Ldonemem # if not, leave
- chi %r10,0 # do we have chunks left?
- je .Ldonemem
- alr %r5,%r1 # add 128KB to end of chunk
- lr %r4,%r5 # potential new chunk
- clr %r5,%r9 # should we go on?
- jl .Lloop
-.Ldonemem:
- l %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags
-#
-# find out if we are running under VM
-#
- stidp __LC_CPUID # store cpuid
- tm __LC_CPUID,0xff # running under VM ?
- bno .Lnovm-.LPG1(%r13)
- oi 3(%r12),1 # set VM flag
-.Lnovm:
- lh %r0,__LC_CPUID+4 # get cpu version
- chi %r0,0x7490 # running on a P/390 ?
- bne .Lnop390-.LPG1(%r13)
- oi 3(%r12),4 # set P/390 flag
-.Lnop390:
-
-#
-# find out if we have an IEEE fpu
-#
- mvc __LC_PGM_NEW_PSW(8),.Lpcfpu-.LPG1(%r13)
- efpc %r0,0 # test IEEE extract fpc instruction
- oi 3(%r12),2 # set IEEE fpu flag
-.Lchkfpu:
-
-#
-# find out if we have the CSP instruction
-#
- mvc __LC_PGM_NEW_PSW(8),.Lpccsp-.LPG1(%r13)
- la %r0,0
- lr %r1,%r0
- la %r2,4
- csp %r0,%r2 # Test CSP instruction
- oi 3(%r12),8 # set CSP flag
-.Lchkcsp:
-
-#
-# find out if we have the MVPG instruction
-#
- mvc __LC_PGM_NEW_PSW(8),.Lpcmvpg-.LPG1(%r13)
- sr %r0,%r0
- la %r1,0
- la %r2,0
- mvpg %r1,%r2 # Test CSP instruction
- oi 3(%r12),16 # set MVPG flag
-.Lchkmvpg:
-
-#
-# find out if we have the IDTE instruction
-#
- mvc __LC_PGM_NEW_PSW(8),.Lpcidte-.LPG1(%r13)
- .long 0xb2b10000 # store facility list
- tm 0xc8,0x08 # check bit for clearing-by-ASCE
- bno .Lchkidte-.LPG1(%r13)
- lhi %r1,2094
- lhi %r2,0
- .long 0xb98e2001
- oi 3(%r12),0x80 # set IDTE flag
-.Lchkidte:
-
- lpsw .Lentry-.LPG1(13) # jump to _stext in primary-space,
- # virtual and never return ...
- .align 8
-.Lentry:.long 0x00080000,0x80000000 + _stext
-.Lctl: .long 0x04b50002 # cr0: various things
- .long 0 # cr1: primary space segment table
- .long .Lduct # cr2: dispatchable unit control table
- .long 0 # cr3: instruction authorization
- .long 0 # cr4: instruction authorization
- .long 0xffffffff # cr5: primary-aste origin
- .long 0 # cr6: I/O interrupts
- .long 0 # cr7: secondary space segment table
- .long 0 # cr8: access registers translation
- .long 0 # cr9: tracing off
- .long 0 # cr10: tracing off
- .long 0 # cr11: tracing off
- .long 0 # cr12: tracing off
- .long 0 # cr13: home space segment table
- .long 0xc0000000 # cr14: machine check handling off
- .long 0 # cr15: linkage stack operations
-.Lpcmem:.long 0x00080000,0x80000000 + .Lchkmem
-.Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu
-.Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp
-.Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg
-.Lpcidte:.long 0x00080000,0x80000000 + .Lchkidte
-.Lmemsize:.long memory_size
-.Lmchunk:.long memory_chunk
-.Lmflags:.long machine_flags
-.Lbss_bgn: .long __bss_start
-.Lbss_end: .long _end
-
- .org PARMAREA-64
-.Lduct: .long 0,0,0,0,0,0,0,0
- .long 0,0,0,0,0,0,0,0
-
-#
-# params at 10400 (setup.h)
-#
- .org PARMAREA
- .global _pstart
-_pstart:
- .long 0,0 # IPL_DEVICE
- .long 0,RAMDISK_ORIGIN # INITRD_START
- .long 0,RAMDISK_SIZE # INITRD_SIZE
-
- .org COMMAND_LINE
- .byte "root=/dev/ram0 ro"
- .byte 0
- .org 0x11000
-.Lsccb:
- .hword 0x1000 # length, one page
- .byte 0x00,0x00,0x00
- .byte 0x80 # variable response bit set
-.Lsccbr:
- .hword 0x00 # response code
-.Lscpincr1:
- .hword 0x00
-.Lscpa1:
- .byte 0x00
- .fill 89,1,0
-.Lscpa2:
- .int 0x00
-.Lscpincr2:
- .quad 0x00
- .fill 3984,1,0
- .org 0x12000
- .global _pend
-_pend:
-
+.macro GET_IPL_DEVICE
.Lget_ipl_device:
basr %r12,0
-.LPG2: l %r1,0xb8 # get sid
+.LGID: l %r1,0xb8 # get sid
sll %r1,15 # test if subchannel is enabled
srl %r1,31
ltr %r1,%r1
bz 0(%r14) # subchannel disabled
l %r1,0xb8
- la %r5,.Lipl_schib-.LPG2(%r12)
+ la %r5,.Lipl_schib-.LGID(%r12)
stsch 0(%r5) # get schib of subchannel
bnz 0(%r14) # schib not available
tm 5(%r5),0x01 # devno valid?
bno 0(%r14)
- la %r6,ipl_parameter_flags-.LPG2(%r12)
+ la %r6,ipl_parameter_flags-.LGID(%r12)
oi 3(%r6),0x01 # set flag
- la %r2,ipl_devno-.LPG2(%r12)
+ la %r2,ipl_devno-.LGID(%r12)
mvc 0(2,%r2),6(%r5) # store devno
tm 4(%r5),0x80 # qdio capable device?
bno 0(%r14)
@@ -816,46 +537,10 @@ ipl_parameter_flags:
.globl ipl_devno
ipl_devno:
.word 0
+.endm
-#ifdef CONFIG_SHARED_KERNEL
- .org 0x100000
+#ifdef CONFIG_ARCH_S390X
+#include "head64.S"
+#else
+#include "head31.S"
#endif
-
-#
-# startup-code, running in virtual mode
-#
- .globl _stext
-_stext: basr %r13,0 # get base
-.LPG3:
-#
-# Setup stack
-#
- l %r15,.Linittu-.LPG3(%r13)
- mvc __LC_CURRENT(4),__TI_task(%r15)
- ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE
- st %r15,__LC_KERNEL_STACK # set end of kernel stack
- ahi %r15,-96
- xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
-
-# check control registers
- stctl %c0,%c15,0(%r15)
- oi 2(%r15),0x40 # enable sigp emergency signal
- oi 0(%r15),0x10 # switch on low address protection
- lctl %c0,%c15,0(%r15)
-
-#
- lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess
- l %r14,.Lstart-.LPG3(%r13)
- basr %r14,%r14 # call start_kernel
-#
-# We returned from start_kernel ?!? PANIK
-#
- basr %r13,0
- lpsw .Ldw-.(%r13) # load disabled wait psw
-#
- .align 8
-.Ldw: .long 0x000a0000,0x00000000
-.Linittu: .long init_thread_union
-.Lstart: .long start_kernel
-.Laregs: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-