aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/boards
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards')
-rw-r--r--arch/sh/boards/renesas/hs7751rvoip/Kconfig12
-rw-r--r--arch/sh/boards/renesas/hs7751rvoip/Makefile8
-rw-r--r--arch/sh/boards/renesas/hs7751rvoip/io.c283
-rw-r--r--arch/sh/boards/renesas/hs7751rvoip/irq.c116
-rw-r--r--arch/sh/boards/renesas/hs7751rvoip/pci.c149
-rw-r--r--arch/sh/boards/renesas/hs7751rvoip/setup.c105
6 files changed, 0 insertions, 673 deletions
diff --git a/arch/sh/boards/renesas/hs7751rvoip/Kconfig b/arch/sh/boards/renesas/hs7751rvoip/Kconfig
deleted file mode 100644
index 1743be477be..00000000000
--- a/arch/sh/boards/renesas/hs7751rvoip/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if SH_HS7751RVOIP
-
-menu "HS7751RVoIP options"
-
-config HS7751RVOIP_CODEC
- bool "Support VoIP Codec section"
- help
- Selecting this option will support CODEC section.
-
-endmenu
-
-endif
diff --git a/arch/sh/boards/renesas/hs7751rvoip/Makefile b/arch/sh/boards/renesas/hs7751rvoip/Makefile
deleted file mode 100644
index e626377c55e..00000000000
--- a/arch/sh/boards/renesas/hs7751rvoip/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the HS7751RVoIP specific parts of the kernel
-#
-
-obj-y := setup.o io.o irq.o
-
-obj-$(CONFIG_PCI) += pci.o
-
diff --git a/arch/sh/boards/renesas/hs7751rvoip/io.c b/arch/sh/boards/renesas/hs7751rvoip/io.c
deleted file mode 100644
index bb9aa0d6285..00000000000
--- a/arch/sh/boards/renesas/hs7751rvoip/io.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/hs7751rvoip/io.c
- *
- * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Renesas Technology sales HS7751RVoIP
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_hs7751rvoip.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/hs7751rvoip.h>
-#include <asm/addrspace.h>
-
-extern void *area6_io8_base; /* Area 6 8bit I/O Base address */
-extern void *area5_io16_base; /* Area 5 16bit I/O Base address */
-
-/*
- * The 7751R HS7751RVoIP uses the built-in PCI controller (PCIC)
- * of the 7751R processor, and has a SuperIO accessible via the PCI.
- * The board also includes a PCMCIA controller on its memory bus,
- * like the other Solution Engine boards.
- */
-
-#define CODEC_IO_BASE 0x1000
-#define CODEC_IOMAP(a) ((unsigned long)area6_io8_base + ((a) - CODEC_IO_BASE))
-
-static inline unsigned long port2adr(unsigned int port)
-{
- if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
- if (port == 0x3f6)
- return ((unsigned long)area5_io16_base + 0x0c);
- else
- return ((unsigned long)area5_io16_base + 0x800 +
- ((port-0x1f0) << 1));
- else
- maybebadio((unsigned long)port);
- return port;
-}
-
-/* The 7751R HS7751RVoIP seems to have everything hooked */
-/* up pretty normally (nothing on high-bytes only...) so this */
-/* shouldn't be needed */
-static inline int shifted_port(unsigned long port)
-{
- /* For IDE registers, value is not shifted */
- if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
- return 0;
- else
- return 1;
-}
-
-#if defined(CONFIG_HS7751RVOIP_CODEC)
-#define codec_port(port) \
- ((CODEC_IO_BASE <= (port)) && ((port) < (CODEC_IO_BASE + 0x20)))
-#else
-#define codec_port(port) (0)
-#endif
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window. Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used w/o translation for
- * compatibility.
- */
-unsigned char hs7751rvoip_inb(unsigned long port)
-{
- if (PXSEG(port))
- return ctrl_inb(port);
- else if (codec_port(port))
- return ctrl_inb(CODEC_IOMAP(port));
- else if (is_pci_ioaddr(port) || shifted_port(port))
- return ctrl_inb(pci_ioaddr(port));
- else
- return ctrl_inw(port2adr(port)) & 0xff;
-}
-
-unsigned char hs7751rvoip_inb_p(unsigned long port)
-{
- unsigned char v;
-
- if (PXSEG(port))
- v = ctrl_inb(port);
- else if (codec_port(port))
- v = ctrl_inb(CODEC_IOMAP(port));
- else if (is_pci_ioaddr(port) || shifted_port(port))
- v = ctrl_inb(pci_ioaddr(port));
- else
- v = ctrl_inw(port2adr(port)) & 0xff;
- ctrl_delay();
- return v;
-}
-
-unsigned short hs7751rvoip_inw(unsigned long port)
-{
- if (PXSEG(port))
- return ctrl_inw(port);
- else if (is_pci_ioaddr(port) || shifted_port(port))
- return ctrl_inw(pci_ioaddr(port));
- else
- maybebadio(port);
- return 0;
-}
-
-unsigned int hs7751rvoip_inl(unsigned long port)
-{
- if (PXSEG(port))
- return ctrl_inl(port);
- else if (is_pci_ioaddr(port) || shifted_port(port))
- return ctrl_inl(pci_ioaddr(port));
- else
- maybebadio(port);
- return 0;
-}
-
-void hs7751rvoip_outb(unsigned char value, unsigned long port)
-{
-
- if (PXSEG(port))
- ctrl_outb(value, port);
- else if (codec_port(port))
- ctrl_outb(value, CODEC_IOMAP(port));
- else if (is_pci_ioaddr(port) || shifted_port(port))
- ctrl_outb(value, pci_ioaddr(port));
- else
- ctrl_outb(value, port2adr(port));
-}
-
-void hs7751rvoip_outb_p(unsigned char value, unsigned long port)
-{
- if (PXSEG(port))
- ctrl_outb(value, port);
- else if (codec_port(port))
- ctrl_outb(value, CODEC_IOMAP(port));
- else if (is_pci_ioaddr(port) || shifted_port(port))
- ctrl_outb(value, pci_ioaddr(port));
- else
- ctrl_outw(value, port2adr(port));
-
- ctrl_delay();
-}
-
-void hs7751rvoip_outw(unsigned short value, unsigned long port)
-{
- if (PXSEG(port))
- ctrl_outw(value, port);
- else if (is_pci_ioaddr(port) || shifted_port(port))
- ctrl_outw(value, pci_ioaddr(port));
- else
- maybebadio(port);
-}
-
-void hs7751rvoip_outl(unsigned int value, unsigned long port)
-{
- if (PXSEG(port))
- ctrl_outl(value, port);
- else if (is_pci_ioaddr(port) || shifted_port(port))
- ctrl_outl(value, pci_ioaddr(port));
- else
- maybebadio(port);
-}
-
-void hs7751rvoip_insb(unsigned long port, void *addr, unsigned long count)
-{
- u8 *buf = addr;
-
- if (PXSEG(port))
- while (count--)
- *buf++ = ctrl_inb(port);
- else if (codec_port(port))
- while (count--)
- *buf++ = ctrl_inb(CODEC_IOMAP(port));
- else if (is_pci_ioaddr(port) || shifted_port(port)) {
- volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
-
- while (count--)
- *buf++ = *bp;
- } else {
- volatile u16 *p = (volatile u16 *)port2adr(port);
-
- while (count--)
- *buf++ = *p & 0xff;
- }
-}
-
-void hs7751rvoip_insw(unsigned long port, void *addr, unsigned long count)
-{
- volatile u16 *p;
- u16 *buf = addr;
-
- if (PXSEG(port))
- p = (volatile u16 *)port;
- else if (is_pci_ioaddr(port) || shifted_port(port))
- p = (volatile u16 *)pci_ioaddr(port);
- else
- p = (volatile u16 *)port2adr(port);
- while (count--)
- *buf++ = *p;
-}
-
-void hs7751rvoip_insl(unsigned long port, void *addr, unsigned long count)
-{
-
- if (is_pci_ioaddr(port) || shifted_port(port)) {
- volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
- u32 *buf = addr;
-
- while (count--)
- *buf++ = *p;
- } else
- maybebadio(port);
-}
-
-void hs7751rvoip_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- const u8 *buf = addr;
-
- if (PXSEG(port))
- while (count--)
- ctrl_outb(*buf++, port);
- else if (codec_port(port))
- while (count--)
- ctrl_outb(*buf++, CODEC_IOMAP(port));
- else if (is_pci_ioaddr(port) || shifted_port(port)) {
- volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
-
- while (count--)
- *bp = *buf++;
- } else {
- volatile u16 *p = (volatile u16 *)port2adr(port);
-
- while (count--)
- *p = *buf++;
- }
-}
-
-void hs7751rvoip_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- volatile u16 *p;
- const u16 *buf = addr;
-
- if (PXSEG(port))
- p = (volatile u16 *)port;
- else if (is_pci_ioaddr(port) || shifted_port(port))
- p = (volatile u16 *)pci_ioaddr(port);
- else
- p = (volatile u16 *)port2adr(port);
-
- while (count--)
- *p = *buf++;
-}
-
-void hs7751rvoip_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- const u32 *buf = addr;
-
- if (is_pci_ioaddr(port) || shifted_port(port)) {
- volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
-
- while (count--)
- *p = *buf++;
- } else
- maybebadio(port);
-}
-
-void __iomem *hs7751rvoip_ioport_map(unsigned long port, unsigned int size)
-{
- if (PXSEG(port))
- return (void __iomem *)port;
- else if (unlikely(codec_port(port) && (size == 1)))
- return (void __iomem *)CODEC_IOMAP(port);
- else if (is_pci_ioaddr(port))
- return (void __iomem *)pci_ioaddr(port);
-
- return (void __iomem *)port2adr(port);
-}
diff --git a/arch/sh/boards/renesas/hs7751rvoip/irq.c b/arch/sh/boards/renesas/hs7751rvoip/irq.c
deleted file mode 100644
index e55c6686b21..00000000000
--- a/arch/sh/boards/renesas/hs7751rvoip/irq.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/hs7751rvoip/irq.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Renesas Technology Sales HS7751RVoIP Support.
- *
- * Modified for HS7751RVoIP by
- * Atom Create Engineering Co., Ltd. 2002.
- * Lineo uSolutions, Inc. 2003.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/hs7751rvoip.h>
-
-static int mask_pos[] = {8, 9, 10, 11, 12, 13, 0, 1, 2, 3, 4, 5, 6, 7};
-
-static void enable_hs7751rvoip_irq(unsigned int irq);
-static void disable_hs7751rvoip_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_hs7751rvoip_irq disable_hs7751rvoip_irq
-
-static void ack_hs7751rvoip_irq(unsigned int irq);
-static void end_hs7751rvoip_irq(unsigned int irq);
-
-static unsigned int startup_hs7751rvoip_irq(unsigned int irq)
-{
- enable_hs7751rvoip_irq(irq);
- return 0; /* never anything pending */
-}
-
-static void disable_hs7751rvoip_irq(unsigned int irq)
-{
- unsigned short val;
- unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]);
-
- /* Set the priority in IPR to 0 */
- val = ctrl_inw(IRLCNTR3);
- val &= mask;
- ctrl_outw(val, IRLCNTR3);
-}
-
-static void enable_hs7751rvoip_irq(unsigned int irq)
-{
- unsigned short val;
- unsigned short value = (0x0001 << mask_pos[irq]);
-
- /* Set priority in IPR back to original value */
- val = ctrl_inw(IRLCNTR3);
- val |= value;
- ctrl_outw(val, IRLCNTR3);
-}
-
-static void ack_hs7751rvoip_irq(unsigned int irq)
-{
- disable_hs7751rvoip_irq(irq);
-}
-
-static void end_hs7751rvoip_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_hs7751rvoip_irq(irq);
-}
-
-static struct hw_interrupt_type hs7751rvoip_irq_type = {
- .typename = "HS7751RVoIP IRQ",
- .startup = startup_hs7751rvoip_irq,
- .shutdown = shutdown_hs7751rvoip_irq,
- .enable = enable_hs7751rvoip_irq,
- .disable = disable_hs7751rvoip_irq,
- .ack = ack_hs7751rvoip_irq,
- .end = end_hs7751rvoip_irq,
-};
-
-static void make_hs7751rvoip_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_desc[irq].chip = &hs7751rvoip_irq_type;
- disable_hs7751rvoip_irq(irq);
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_hs7751rvoip_IRQ(void)
-{
- int i;
-
- /* IRL0=ON HOOK1
- * IRL1=OFF HOOK1
- * IRL2=ON HOOK2
- * IRL3=OFF HOOK2
- * IRL4=Ringing Detection
- * IRL5=CODEC
- * IRL6=Ethernet
- * IRL7=Ethernet Hub
- * IRL8=USB Communication
- * IRL9=USB Connection
- * IRL10=USB DMA
- * IRL11=CF Card
- * IRL12=PCMCIA
- * IRL13=PCI Slot
- */
- ctrl_outw(0x9876, IRLCNTR1);
- ctrl_outw(0xdcba, IRLCNTR2);
- ctrl_outw(0x0050, IRLCNTR4);
- ctrl_outw(0x4321, IRLCNTR5);
-
- for (i=0; i<14; i++)
- make_hs7751rvoip_irq(i);
-}
diff --git a/arch/sh/boards/renesas/hs7751rvoip/pci.c b/arch/sh/boards/renesas/hs7751rvoip/pci.c
deleted file mode 100644
index 1c0ddee30d2..00000000000
--- a/arch/sh/boards/renesas/hs7751rvoip/pci.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/hs7751rvoip/pci.c
- *
- * Author: Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * PCI initialization for the Renesas SH7751R HS7751RVoIP board
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-
-#include <asm/io.h>
-#include "../../../drivers/pci/pci-sh7751.h"
-#include <asm/hs7751rvoip/hs7751rvoip.h>
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-/*
- * Only long word accesses of the PCIC's internal local registers and the
- * configuration registers from the CPU is supported.
- */
-#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
-#define PCIC_READ(x) readl(PCI_REG(x))
-
-/*
- * Description: This function sets up and initializes the pcic, sets
- * up the BARS, maps the DRAM into the address space etc, etc.
- */
-int __init pcibios_init_platform(void)
-{
- unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
- unsigned short bcr2, bcr3;
-
- /*
- * Initialize the slave bus controller on the pcic. The values used
- * here should not be hardcoded, but they should be taken from the bsc
- * on the processor, to make this function as generic as possible.
- * (i.e. Another sbc may usr different SDRAM timing settings -- in order
- * for the pcic to work, its settings need to be exactly the same.)
- */
- bcr1 = (*(volatile unsigned long *)(SH7751_BCR1));
- bcr2 = (*(volatile unsigned short *)(SH7751_BCR2));
- bcr3 = (*(volatile unsigned short *)(SH7751_BCR3));
- wcr1 = (*(volatile unsigned long *)(SH7751_WCR1));
- wcr2 = (*(volatile unsigned long *)(SH7751_WCR2));
- wcr3 = (*(volatile unsigned long *)(SH7751_WCR3));
- mcr = (*(volatile unsigned long *)(SH7751_MCR));
-
- bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
- (*(volatile unsigned long *)(SH7751_BCR1)) = bcr1;
-
- bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
- PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
- PCIC_WRITE(SH7751_PCIBCR3, bcr3); /* PCIC BCR3 */
- PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
- PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
- PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
-
- /* Enable all interrupts, so we know what to fix */
- PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
- PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
-
- /* Set up standard PCI config registers */
- PCIC_WRITE(SH7751_PCICONF1, 0xFB900047); /* Bus Master, Mem & I/O access */
- PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
- PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
- PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
- PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
- PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
- PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
- PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
- PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
- PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
-
- /* Now turn it on... */
- PCIC_WRITE(SH7751_PCICR, 0xa5000001);
-
- /*
- * Set PCIMBR and PCIIOBR here, assuming a single window
- * (16M MEM, 256K IO) is enough. If a larger space is
- * needed, the readx/writex and inx/outx functions will
- * have to do more (e.g. setting registers for each call).
- */
-
- /*
- * Set the MBR so PCI address is one-to-one with window,
- * meaning all calls go straight through... use ifdef to
- * catch erroneous assumption.
- */
- BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE);
-
- PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM);
-
- /* Set IOBR for window containing area specified in pci.h */
- PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK));
-
- /* All done, may as well say so... */
- printk("SH7751R PCI: Finished initialization of the PCI controller\n");
-
- return 1;
-}
-
-int __init pcibios_map_platform_irq(u8 slot, u8 pin)
-{
- switch (slot) {
- case 0: return IRQ_PCISLOT; /* PCI Extend slot */
- case 1: return IRQ_PCMCIA; /* PCI Cardbus Bridge */
- case 2: return IRQ_PCIETH; /* Realtek Ethernet controller */
- case 3: return IRQ_PCIHUB; /* Realtek Ethernet Hub controller */
- default:
- printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
- return -1;
- }
-}
-
-static struct resource sh7751_io_resource = {
- .name = "SH7751_IO",
- .start = 0x4000,
- .end = 0x4000 + SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751_mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c
deleted file mode 100644
index c05625975f2..00000000000
--- a/arch/sh/boards/renesas/hs7751rvoip/setup.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Renesas Technology Sales HS7751RVoIP Support.
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Modified for HS7751RVoIP by
- * Atom Create Engineering Co., Ltd. 2002.
- * Lineo uSolutions, Inc. 2003.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/mm.h>
-#include <linux/pm.h>
-#include <asm/hs7751rvoip.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-
-static void hs7751rvoip_power_off(void)
-{
- ctrl_outw(ctrl_inw(PA_OUTPORTR) & 0xffdf, PA_OUTPORTR);
-}
-
-void *area5_io8_base;
-void *area6_io8_base;
-void *area5_io16_base;
-void *area6_io16_base;
-
-static int __init hs7751rvoip_cf_init(void)
-{
- pgprot_t prot;
- unsigned long paddrbase;
-
- /* open I/O area window */
- paddrbase = virt_to_phys((void *)(PA_AREA5_IO+0x00000800));
- prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_COM16);
- area5_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
- if (!area5_io16_base) {
- printk("allocate_cf_area : can't open CF I/O window!\n");
- return -ENOMEM;
- }
-
- /* XXX : do we need attribute and common-memory area also? */
-
- paddrbase = virt_to_phys((void *)PA_AREA6_IO);
-#if defined(CONFIG_HS7751RVOIP_CODEC)
- prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_COM8);
-#else
- prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO8);
-#endif
- area6_io8_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
- if (!area6_io8_base) {
- printk("allocate_cf_area : can't open CODEC I/O 8bit window!\n");
- return -ENOMEM;
- }
- prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16);
- area6_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
- if (!area6_io16_base) {
- printk("allocate_cf_area : can't open CODEC I/O 16bit window!\n");
- return -ENOMEM;
- }
-
- return 0;
-}
-device_initcall(hs7751rvoip_cf_init);
-
-/*
- * Initialize the board
- */
-static void __init hs7751rvoip_setup(char **cmdline_p)
-{
- ctrl_outb(0xf0, PA_OUTPORTR);
- pm_power_off = hs7751rvoip_power_off;
-
- printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n");
-}
-
-static struct sh_machine_vector mv_hs7751rvoip __initmv = {
- .mv_name = "HS7751RVoIP",
- .mv_setup = hs7751rvoip_setup,
- .mv_nr_irqs = 72,
-
- .mv_inb = hs7751rvoip_inb,
- .mv_inw = hs7751rvoip_inw,
- .mv_inl = hs7751rvoip_inl,
- .mv_outb = hs7751rvoip_outb,
- .mv_outw = hs7751rvoip_outw,
- .mv_outl = hs7751rvoip_outl,
-
- .mv_inb_p = hs7751rvoip_inb_p,
- .mv_inw_p = hs7751rvoip_inw,
- .mv_inl_p = hs7751rvoip_inl,
- .mv_outb_p = hs7751rvoip_outb_p,
- .mv_outw_p = hs7751rvoip_outw,
- .mv_outl_p = hs7751rvoip_outl,
-
- .mv_insb = hs7751rvoip_insb,
- .mv_insw = hs7751rvoip_insw,
- .mv_insl = hs7751rvoip_insl,
- .mv_outsb = hs7751rvoip_outsb,
- .mv_outsw = hs7751rvoip_outsw,
- .mv_outsl = hs7751rvoip_outsl,
-
- .mv_init_irq = init_hs7751rvoip_IRQ,
- .mv_ioport_map = hs7751rvoip_ioport_map,
-};