aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/mm/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/mm/Kconfig')
-rw-r--r--arch/sh/mm/Kconfig78
1 files changed, 72 insertions, 6 deletions
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index fb586b1cf8b..9dd606464d2 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -20,7 +20,10 @@ config CPU_SH4
config CPU_SH4A
bool
select CPU_SH4
- select CPU_HAS_INTC2_IRQ
+
+config CPU_SH4AL_DSP
+ bool
+ select CPU_SH4A
config CPU_SUBTYPE_ST40
bool
@@ -48,6 +51,12 @@ config CPU_SUBTYPE_SH7705
select CPU_SH3
select CPU_HAS_PINT_IRQ
+config CPU_SUBTYPE_SH7706
+ bool "Support SH7706 processor"
+ select CPU_SH3
+ help
+ Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU.
+
config CPU_SUBTYPE_SH7707
bool "Support SH7707 processor"
select CPU_SH3
@@ -69,6 +78,12 @@ config CPU_SUBTYPE_SH7709
help
Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU.
+config CPU_SUBTYPE_SH7710
+ bool "Support SH7710 processor"
+ select CPU_SH3
+ help
+ Select SH7710 if you have a SH3-DSP SH7710 CPU.
+
comment "SH-4 Processor Support"
config CPU_SUBTYPE_SH7750
@@ -133,10 +148,6 @@ config CPU_SUBTYPE_ST40GX1
comment "SH-4A Processor Support"
-config CPU_SUBTYPE_SH73180
- bool "Support SH73180 processor"
- select CPU_SH4A
-
config CPU_SUBTYPE_SH7770
bool "Support SH7770 processor"
select CPU_SH4A
@@ -144,6 +155,17 @@ config CPU_SUBTYPE_SH7770
config CPU_SUBTYPE_SH7780
bool "Support SH7780 processor"
select CPU_SH4A
+ select CPU_HAS_INTC2_IRQ
+
+comment "SH4AL-DSP Processor Support"
+
+config CPU_SUBTYPE_SH73180
+ bool "Support SH73180 processor"
+ select CPU_SH4AL_DSP
+
+config CPU_SUBTYPE_SH7343
+ bool "Support SH7343 processor"
+ select CPU_SH4AL_DSP
endmenu
@@ -161,15 +183,59 @@ config MMU
turning this off will boot the kernel on these machines with the
MMU implicitly switched off.
+config PAGE_OFFSET
+ hex
+ default "0x80000000" if MMU
+ default "0x00000000"
+
+config MEMORY_START
+ hex "Physical memory start address"
+ default "0x08000000"
+ ---help---
+ Computers built with Hitachi SuperH processors always
+ map the ROM starting at address zero. But the processor
+ does not specify the range that RAM takes.
+
+ The physical memory (RAM) start address will be automatically
+ set to 08000000. Other platforms, such as the Solution Engine
+ boards typically map RAM at 0C000000.
+
+ Tweak this only when porting to a new machine which does not
+ already have a defconfig. Changing it from the known correct
+ value on any of the known systems will only lead to disaster.
+
+config MEMORY_SIZE
+ hex "Physical memory size"
+ default "0x00400000"
+ help
+ This sets the default memory size assumed by your SH kernel. It can
+ be overridden as normal by the 'mem=' argument on the kernel command
+ line. If unsure, consult your board specifications or just leave it
+ as 0x00400000 which was the default value before this became
+ configurable.
+
config 32BIT
bool "Support 32-bit physical addressing through PMB"
- depends on CPU_SH4A
+ depends on CPU_SH4A && MMU
default y
help
If you say Y here, physical addressing will be extended to
32-bits through the SH-4A PMB. If this is not set, legacy
29-bit physical addressing will be used.
+config VSYSCALL
+ bool "Support vsyscall page"
+ depends on MMU
+ default y
+ help
+ This will enable support for the kernel mapping a vDSO page
+ in process space, and subsequently handing down the entry point
+ to the libc through the ELF auxiliary vector.
+
+ From the kernel side this is used for the signal trampoline.
+ For systems with an MMU that can afford to give up a page,
+ (the default value) say Y.
+
choice
prompt "HugeTLB page size"
depends on HUGETLB_PAGE && CPU_SH4 && MMU