diff options
Diffstat (limited to 'arch/x86/kernel/entry_64.S')
-rw-r--r-- | arch/x86/kernel/entry_64.S | 178 |
1 files changed, 168 insertions, 10 deletions
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index ba41bf42748..89434d43960 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -53,6 +53,12 @@ #include <asm/paravirt.h> #include <asm/ftrace.h> +/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */ +#include <linux/elf-em.h> +#define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) +#define __AUDIT_ARCH_64BIT 0x80000000 +#define __AUDIT_ARCH_LE 0x40000000 + .code64 #ifdef CONFIG_FTRACE @@ -349,9 +355,9 @@ ENTRY(system_call_after_swapgs) movq %rcx,RIP-ARGOFFSET(%rsp) CFI_REL_OFFSET rip,RIP-ARGOFFSET GET_THREAD_INFO(%rcx) - testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \ - TI_flags(%rcx) + testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%rcx) jnz tracesys +system_call_fastpath: cmpq $__NR_syscall_max,%rax ja badsys movq %r10,%rcx @@ -403,16 +409,16 @@ sysret_careful: sysret_signal: TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_NONE) - testl $_TIF_DO_NOTIFY_MASK,%edx - jz 1f - - /* Really a signal */ +#ifdef CONFIG_AUDITSYSCALL + bt $TIF_SYSCALL_AUDIT,%edx + jc sysret_audit +#endif /* edx: work flags (arg3) */ leaq do_notify_resume(%rip),%rax leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1 xorl %esi,%esi # oldset -> arg2 call ptregscall_common -1: movl $_TIF_WORK_MASK,%edi + movl $_TIF_WORK_MASK,%edi /* Use IRET because user could have changed frame. This works because ptregscall_common has called FIXUP_TOP_OF_STACK. */ DISABLE_INTERRUPTS(CLBR_NONE) @@ -423,14 +429,56 @@ badsys: movq $-ENOSYS,RAX-ARGOFFSET(%rsp) jmp ret_from_sys_call +#ifdef CONFIG_AUDITSYSCALL + /* + * Fast path for syscall audit without full syscall trace. + * We just call audit_syscall_entry() directly, and then + * jump back to the normal fast path. + */ +auditsys: + movq %r10,%r9 /* 6th arg: 4th syscall arg */ + movq %rdx,%r8 /* 5th arg: 3rd syscall arg */ + movq %rsi,%rcx /* 4th arg: 2nd syscall arg */ + movq %rdi,%rdx /* 3rd arg: 1st syscall arg */ + movq %rax,%rsi /* 2nd arg: syscall number */ + movl $AUDIT_ARCH_X86_64,%edi /* 1st arg: audit arch */ + call audit_syscall_entry + LOAD_ARGS 0 /* reload call-clobbered registers */ + jmp system_call_fastpath + + /* + * Return fast path for syscall audit. Call audit_syscall_exit() + * directly and then jump back to the fast path with TIF_SYSCALL_AUDIT + * masked off. + */ +sysret_audit: + movq %rax,%rsi /* second arg, syscall return value */ + cmpq $0,%rax /* is it < 0? */ + setl %al /* 1 if so, 0 if not */ + movzbl %al,%edi /* zero-extend that into %edi */ + inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */ + call audit_syscall_exit + movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi + jmp sysret_check +#endif /* CONFIG_AUDITSYSCALL */ + /* Do syscall tracing */ tracesys: +#ifdef CONFIG_AUDITSYSCALL + testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%rcx) + jz auditsys +#endif SAVE_REST movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */ FIXUP_TOP_OF_STACK %rdi movq %rsp,%rdi call syscall_trace_enter - LOAD_ARGS ARGOFFSET /* reload args from stack in case ptrace changed it */ + /* + * Reload arg registers from stack in case ptrace changed them. + * We don't reload %rax because syscall_trace_enter() returned + * the value it wants us to use in the table lookup. + */ + LOAD_ARGS ARGOFFSET, 1 RESTORE_REST cmpq $__NR_syscall_max,%rax ja int_ret_from_sys_call /* RAX(%rsp) set to -ENOSYS above */ @@ -444,6 +492,7 @@ tracesys: * Has correct top of stack, but partial stack frame. */ .globl int_ret_from_sys_call + .globl int_with_check int_ret_from_sys_call: DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF @@ -483,7 +532,7 @@ int_very_careful: ENABLE_INTERRUPTS(CLBR_NONE) SAVE_REST /* Check for syscall exit trace */ - testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx + testl $_TIF_WORK_SYSCALL_EXIT,%edx jz int_signal pushq %rdi CFI_ADJUST_CFA_OFFSET 8 @@ -491,7 +540,7 @@ int_very_careful: call syscall_trace_leave popq %rdi CFI_ADJUST_CFA_OFFSET -8 - andl $~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edi + andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi jmp int_restore_rest int_signal: @@ -816,6 +865,9 @@ END(invalidate_interrupt\num) ENTRY(call_function_interrupt) apicinterrupt CALL_FUNCTION_VECTOR,smp_call_function_interrupt END(call_function_interrupt) +ENTRY(call_function_single_interrupt) + apicinterrupt CALL_FUNCTION_SINGLE_VECTOR,smp_call_function_single_interrupt +END(call_function_single_interrupt) ENTRY(irq_move_cleanup_interrupt) apicinterrupt IRQ_MOVE_CLEANUP_VECTOR,smp_irq_move_cleanup_interrupt END(irq_move_cleanup_interrupt) @@ -1186,6 +1238,7 @@ END(device_not_available) /* runs on exception stack */ KPROBE_ENTRY(debug) INTR_FRAME + PARAVIRT_ADJUST_EXCEPTION_FRAME pushq $0 CFI_ADJUST_CFA_OFFSET 8 paranoidentry do_debug, DEBUG_STACK @@ -1195,6 +1248,7 @@ KPROBE_END(debug) /* runs on exception stack */ KPROBE_ENTRY(nmi) INTR_FRAME + PARAVIRT_ADJUST_EXCEPTION_FRAME pushq $-1 CFI_ADJUST_CFA_OFFSET 8 paranoidentry do_nmi, 0, 0 @@ -1208,6 +1262,7 @@ KPROBE_END(nmi) KPROBE_ENTRY(int3) INTR_FRAME + PARAVIRT_ADJUST_EXCEPTION_FRAME pushq $0 CFI_ADJUST_CFA_OFFSET 8 paranoidentry do_int3, DEBUG_STACK @@ -1234,6 +1289,7 @@ END(coprocessor_segment_overrun) /* runs on exception stack */ ENTRY(double_fault) XCPT_FRAME + PARAVIRT_ADJUST_EXCEPTION_FRAME paranoidentry do_double_fault jmp paranoid_exit1 CFI_ENDPROC @@ -1250,6 +1306,7 @@ END(segment_not_present) /* runs on exception stack */ ENTRY(stack_segment) XCPT_FRAME + PARAVIRT_ADJUST_EXCEPTION_FRAME paranoidentry do_stack_segment jmp paranoid_exit1 CFI_ENDPROC @@ -1275,6 +1332,7 @@ END(spurious_interrupt_bug) /* runs on exception stack */ ENTRY(machine_check) INTR_FRAME + PARAVIRT_ADJUST_EXCEPTION_FRAME pushq $0 CFI_ADJUST_CFA_OFFSET 8 paranoidentry do_machine_check @@ -1309,3 +1367,103 @@ KPROBE_ENTRY(ignore_sysret) sysret CFI_ENDPROC ENDPROC(ignore_sysret) + +#ifdef CONFIG_XEN +ENTRY(xen_hypervisor_callback) + zeroentry xen_do_hypervisor_callback +END(xen_hypervisor_callback) + +/* +# A note on the "critical region" in our callback handler. +# We want to avoid stacking callback handlers due to events occurring +# during handling of the last event. To do this, we keep events disabled +# until we've done all processing. HOWEVER, we must enable events before +# popping the stack frame (can't be done atomically) and so it would still +# be possible to get enough handler activations to overflow the stack. +# Although unlikely, bugs of that kind are hard to track down, so we'd +# like to avoid the possibility. +# So, on entry to the handler we detect whether we interrupted an +# existing activation in its critical region -- if so, we pop the current +# activation and restart the handler using the previous one. +*/ +ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs) + CFI_STARTPROC +/* Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will + see the correct pointer to the pt_regs */ + movq %rdi, %rsp # we don't return, adjust the stack frame + CFI_ENDPROC + CFI_DEFAULT_STACK +11: incl %gs:pda_irqcount + movq %rsp,%rbp + CFI_DEF_CFA_REGISTER rbp + cmovzq %gs:pda_irqstackptr,%rsp + pushq %rbp # backlink for old unwinder + call xen_evtchn_do_upcall + popq %rsp + CFI_DEF_CFA_REGISTER rsp + decl %gs:pda_irqcount + jmp error_exit + CFI_ENDPROC +END(do_hypervisor_callback) + +/* +# Hypervisor uses this for application faults while it executes. +# We get here for two reasons: +# 1. Fault while reloading DS, ES, FS or GS +# 2. Fault while executing IRET +# Category 1 we do not need to fix up as Xen has already reloaded all segment +# registers that could be reloaded and zeroed the others. +# Category 2 we fix up by killing the current process. We cannot use the +# normal Linux return path in this case because if we use the IRET hypercall +# to pop the stack frame we end up in an infinite loop of failsafe callbacks. +# We distinguish between categories by comparing each saved segment register +# with its current contents: any discrepancy means we in category 1. +*/ +ENTRY(xen_failsafe_callback) + framesz = (RIP-0x30) /* workaround buggy gas */ + _frame framesz + CFI_REL_OFFSET rcx, 0 + CFI_REL_OFFSET r11, 8 + movw %ds,%cx + cmpw %cx,0x10(%rsp) + CFI_REMEMBER_STATE + jne 1f + movw %es,%cx + cmpw %cx,0x18(%rsp) + jne 1f + movw %fs,%cx + cmpw %cx,0x20(%rsp) + jne 1f + movw %gs,%cx + cmpw %cx,0x28(%rsp) + jne 1f + /* All segments match their saved values => Category 2 (Bad IRET). */ + movq (%rsp),%rcx + CFI_RESTORE rcx + movq 8(%rsp),%r11 + CFI_RESTORE r11 + addq $0x30,%rsp + CFI_ADJUST_CFA_OFFSET -0x30 + pushq $0 + CFI_ADJUST_CFA_OFFSET 8 + pushq %r11 + CFI_ADJUST_CFA_OFFSET 8 + pushq %rcx + CFI_ADJUST_CFA_OFFSET 8 + jmp general_protection + CFI_RESTORE_STATE +1: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */ + movq (%rsp),%rcx + CFI_RESTORE rcx + movq 8(%rsp),%r11 + CFI_RESTORE r11 + addq $0x30,%rsp + CFI_ADJUST_CFA_OFFSET -0x30 + pushq $0 + CFI_ADJUST_CFA_OFFSET 8 + SAVE_ALL + jmp error_exit + CFI_ENDPROC +END(xen_failsafe_callback) + +#endif /* CONFIG_XEN */ |