aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel/smpboot.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/smpboot.c')
-rw-r--r--arch/x86/kernel/smpboot.c588
1 files changed, 588 insertions, 0 deletions
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 5bff87e9989..69c17965f48 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -4,14 +4,42 @@
#include <linux/sched.h>
#include <linux/percpu.h>
#include <linux/bootmem.h>
+#include <linux/err.h>
+#include <linux/nmi.h>
+#include <asm/desc.h>
#include <asm/nmi.h>
#include <asm/irq.h>
#include <asm/smp.h>
#include <asm/cpu.h>
#include <asm/numa.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include <asm/mtrr.h>
+#include <asm/nmi.h>
+#include <linux/mc146818rtc.h>
#include <mach_apic.h>
+#include <mach_wakecpu.h>
+#include <smpboot_hooks.h>
+
+/* Store all idle threads, this can be reused instead of creating
+* a new thread. Also avoids complicated thread destroy functionality
+* for idle threads.
+*/
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * Needed only for CONFIG_HOTPLUG_CPU because __cpuinitdata is
+ * removed after init for !CONFIG_HOTPLUG_CPU.
+ */
+static DEFINE_PER_CPU(struct task_struct *, idle_thread_array);
+#define get_idle_for_cpu(x) (per_cpu(idle_thread_array, x))
+#define set_idle_for_cpu(x, p) (per_cpu(idle_thread_array, x) = (p))
+#else
+struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
+#define get_idle_for_cpu(x) (idle_thread_array[(x)])
+#define set_idle_for_cpu(x, p) (idle_thread_array[(x)] = (p))
+#endif
/* Number of siblings per CPU package */
int smp_num_siblings = 1;
@@ -41,6 +69,8 @@ EXPORT_PER_CPU_SYMBOL(cpu_core_map);
DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
EXPORT_PER_CPU_SYMBOL(cpu_info);
+static atomic_t init_deasserted;
+
/* ready for x86_64, no harm for x86, since it will overwrite after alloc */
unsigned char *trampoline_base = __va(SMP_TRAMPOLINE_BASE);
@@ -110,6 +140,96 @@ void unmap_cpu_to_logical_apicid(int cpu)
#define map_cpu_to_logical_apicid() do {} while (0)
#endif
+/*
+ * Report back to the Boot Processor.
+ * Running on AP.
+ */
+void __cpuinit smp_callin(void)
+{
+ int cpuid, phys_id;
+ unsigned long timeout;
+
+ /*
+ * If waken up by an INIT in an 82489DX configuration
+ * we may get here before an INIT-deassert IPI reaches
+ * our local APIC. We have to wait for the IPI or we'll
+ * lock up on an APIC access.
+ */
+ wait_for_init_deassert(&init_deasserted);
+
+ /*
+ * (This works even if the APIC is not enabled.)
+ */
+ phys_id = GET_APIC_ID(apic_read(APIC_ID));
+ cpuid = smp_processor_id();
+ if (cpu_isset(cpuid, cpu_callin_map)) {
+ panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__,
+ phys_id, cpuid);
+ }
+ Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
+
+ /*
+ * STARTUP IPIs are fragile beasts as they might sometimes
+ * trigger some glue motherboard logic. Complete APIC bus
+ * silence for 1 second, this overestimates the time the
+ * boot CPU is spending to send the up to 2 STARTUP IPIs
+ * by a factor of two. This should be enough.
+ */
+
+ /*
+ * Waiting 2s total for startup (udelay is not yet working)
+ */
+ timeout = jiffies + 2*HZ;
+ while (time_before(jiffies, timeout)) {
+ /*
+ * Has the boot CPU finished it's STARTUP sequence?
+ */
+ if (cpu_isset(cpuid, cpu_callout_map))
+ break;
+ cpu_relax();
+ }
+
+ if (!time_before(jiffies, timeout)) {
+ panic("%s: CPU%d started up but did not get a callout!\n",
+ __func__, cpuid);
+ }
+
+ /*
+ * the boot CPU has finished the init stage and is spinning
+ * on callin_map until we finish. We are free to set up this
+ * CPU, first the APIC. (this is probably redundant on most
+ * boards)
+ */
+
+ Dprintk("CALLIN, before setup_local_APIC().\n");
+ smp_callin_clear_local_apic();
+ setup_local_APIC();
+ end_local_APIC_setup();
+ map_cpu_to_logical_apicid();
+
+ /*
+ * Get our bogomips.
+ *
+ * Need to enable IRQs because it can take longer and then
+ * the NMI watchdog might kill us.
+ */
+ local_irq_enable();
+ calibrate_delay();
+ local_irq_disable();
+ Dprintk("Stack at about %p\n", &cpuid);
+
+ /*
+ * Save our processor parameters
+ */
+ smp_store_cpu_info(cpuid);
+
+ /*
+ * Allow the master to continue.
+ */
+ cpu_set(cpuid, cpu_callin_map);
+}
+
+
static void __cpuinit smp_apply_quirks(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_X86_32
@@ -327,6 +447,474 @@ void impress_friends(void)
Dprintk("Before bogocount - setting activated=1.\n");
}
+static inline void __inquire_remote_apic(int apicid)
+{
+ unsigned i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
+ char *names[] = { "ID", "VERSION", "SPIV" };
+ int timeout;
+ u32 status;
+
+ printk(KERN_INFO "Inquiring remote APIC #%d...\n", apicid);
+
+ for (i = 0; i < ARRAY_SIZE(regs); i++) {
+ printk(KERN_INFO "... APIC #%d %s: ", apicid, names[i]);
+
+ /*
+ * Wait for idle.
+ */
+ status = safe_apic_wait_icr_idle();
+ if (status)
+ printk(KERN_CONT
+ "a previous APIC delivery may have failed\n");
+
+ apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
+ apic_write_around(APIC_ICR, APIC_DM_REMRD | regs[i]);
+
+ timeout = 0;
+ do {
+ udelay(100);
+ status = apic_read(APIC_ICR) & APIC_ICR_RR_MASK;
+ } while (status == APIC_ICR_RR_INPROG && timeout++ < 1000);
+
+ switch (status) {
+ case APIC_ICR_RR_VALID:
+ status = apic_read(APIC_RRR);
+ printk(KERN_CONT "%08x\n", status);
+ break;
+ default:
+ printk(KERN_CONT "failed\n");
+ }
+ }
+}
+
+#ifdef WAKE_SECONDARY_VIA_NMI
+/*
+ * Poke the other CPU in the eye via NMI to wake it up. Remember that the normal
+ * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
+ * won't ... remember to clear down the APIC, etc later.
+ */
+static int __devinit
+wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
+{
+ unsigned long send_status, accept_status = 0;
+ int maxlvt;
+
+ /* Target chip */
+ apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid));
+
+ /* Boot on the stack */
+ /* Kick the second */
+ apic_write_around(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
+
+ Dprintk("Waiting for send to finish...\n");
+ send_status = safe_apic_wait_icr_idle();
+
+ /*
+ * Give the other CPU some time to accept the IPI.
+ */
+ udelay(200);
+ /*
+ * Due to the Pentium erratum 3AP.
+ */
+ maxlvt = lapic_get_maxlvt();
+ if (maxlvt > 3) {
+ apic_read_around(APIC_SPIV);
+ apic_write(APIC_ESR, 0);
+ }
+ accept_status = (apic_read(APIC_ESR) & 0xEF);
+ Dprintk("NMI sent.\n");
+
+ if (send_status)
+ printk(KERN_ERR "APIC never delivered???\n");
+ if (accept_status)
+ printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
+
+ return (send_status | accept_status);
+}
+#endif /* WAKE_SECONDARY_VIA_NMI */
+
+extern void start_secondary(void *unused);
+#ifdef WAKE_SECONDARY_VIA_INIT
+static int __devinit
+wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
+{
+ unsigned long send_status, accept_status = 0;
+ int maxlvt, num_starts, j;
+
+ /*
+ * Be paranoid about clearing APIC errors.
+ */
+ if (APIC_INTEGRATED(apic_version[phys_apicid])) {
+ apic_read_around(APIC_SPIV);
+ apic_write(APIC_ESR, 0);
+ apic_read(APIC_ESR);
+ }
+
+ Dprintk("Asserting INIT.\n");
+
+ /*
+ * Turn INIT on target chip
+ */
+ apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+
+ /*
+ * Send IPI
+ */
+ apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT
+ | APIC_DM_INIT);
+
+ Dprintk("Waiting for send to finish...\n");
+ send_status = safe_apic_wait_icr_idle();
+
+ mdelay(10);
+
+ Dprintk("Deasserting INIT.\n");
+
+ /* Target chip */
+ apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+
+ /* Send IPI */
+ apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
+
+ Dprintk("Waiting for send to finish...\n");
+ send_status = safe_apic_wait_icr_idle();
+
+ mb();
+ atomic_set(&init_deasserted, 1);
+
+ /*
+ * Should we send STARTUP IPIs ?
+ *
+ * Determine this based on the APIC version.
+ * If we don't have an integrated APIC, don't send the STARTUP IPIs.
+ */
+ if (APIC_INTEGRATED(apic_version[phys_apicid]))
+ num_starts = 2;
+ else
+ num_starts = 0;
+
+ /*
+ * Paravirt / VMI wants a startup IPI hook here to set up the
+ * target processor state.
+ */
+ startup_ipi_hook(phys_apicid, (unsigned long) start_secondary,
+#ifdef CONFIG_X86_64
+ (unsigned long)init_rsp);
+#else
+ (unsigned long)stack_start.sp);
+#endif
+
+ /*
+ * Run STARTUP IPI loop.
+ */
+ Dprintk("#startup loops: %d.\n", num_starts);
+
+ maxlvt = lapic_get_maxlvt();
+
+ for (j = 1; j <= num_starts; j++) {
+ Dprintk("Sending STARTUP #%d.\n", j);
+ apic_read_around(APIC_SPIV);
+ apic_write(APIC_ESR, 0);
+ apic_read(APIC_ESR);
+ Dprintk("After apic_write.\n");
+
+ /*
+ * STARTUP IPI
+ */
+
+ /* Target chip */
+ apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+
+ /* Boot on the stack */
+ /* Kick the second */
+ apic_write_around(APIC_ICR, APIC_DM_STARTUP
+ | (start_eip >> 12));
+
+ /*
+ * Give the other CPU some time to accept the IPI.
+ */
+ udelay(300);
+
+ Dprintk("Startup point 1.\n");
+
+ Dprintk("Waiting for send to finish...\n");
+ send_status = safe_apic_wait_icr_idle();
+
+ /*
+ * Give the other CPU some time to accept the IPI.
+ */
+ udelay(200);
+ /*
+ * Due to the Pentium erratum 3AP.
+ */
+ if (maxlvt > 3) {
+ apic_read_around(APIC_SPIV);
+ apic_write(APIC_ESR, 0);
+ }
+ accept_status = (apic_read(APIC_ESR) & 0xEF);
+ if (send_status || accept_status)
+ break;
+ }
+ Dprintk("After Startup.\n");
+
+ if (send_status)
+ printk(KERN_ERR "APIC never delivered???\n");
+ if (accept_status)
+ printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
+
+ return (send_status | accept_status);
+}
+#endif /* WAKE_SECONDARY_VIA_INIT */
+
+struct create_idle {
+ struct work_struct work;
+ struct task_struct *idle;
+ struct completion done;
+ int cpu;
+};
+
+static void __cpuinit do_fork_idle(struct work_struct *work)
+{
+ struct create_idle *c_idle =
+ container_of(work, struct create_idle, work);
+
+ c_idle->idle = fork_idle(c_idle->cpu);
+ complete(&c_idle->done);
+}
+
+static int __cpuinit do_boot_cpu(int apicid, int cpu)
+/*
+ * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
+ * (ie clustered apic addressing mode), this is a LOGICAL apic ID.
+ * Returns zero if CPU booted OK, else error code from wakeup_secondary_cpu.
+ */
+{
+ unsigned long boot_error = 0;
+ int timeout;
+ unsigned long start_ip;
+ unsigned short nmi_high = 0, nmi_low = 0;
+ struct create_idle c_idle = {
+ .cpu = cpu,
+ .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
+ };
+ INIT_WORK(&c_idle.work, do_fork_idle);
+#ifdef CONFIG_X86_64
+ /* allocate memory for gdts of secondary cpus. Hotplug is considered */
+ if (!cpu_gdt_descr[cpu].address &&
+ !(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
+ printk(KERN_ERR "Failed to allocate GDT for CPU %d\n", cpu);
+ return -1;
+ }
+
+ /* Allocate node local memory for AP pdas */
+ if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) {
+ struct x8664_pda *newpda, *pda;
+ int node = cpu_to_node(cpu);
+ pda = cpu_pda(cpu);
+ newpda = kmalloc_node(sizeof(struct x8664_pda), GFP_ATOMIC,
+ node);
+ if (newpda) {
+ memcpy(newpda, pda, sizeof(struct x8664_pda));
+ cpu_pda(cpu) = newpda;
+ } else
+ printk(KERN_ERR
+ "Could not allocate node local PDA for CPU %d on node %d\n",
+ cpu, node);
+ }
+#endif
+
+ alternatives_smp_switch(1);
+
+ c_idle.idle = get_idle_for_cpu(cpu);
+
+ /*
+ * We can't use kernel_thread since we must avoid to
+ * reschedule the child.
+ */
+ if (c_idle.idle) {
+ c_idle.idle->thread.sp = (unsigned long) (((struct pt_regs *)
+ (THREAD_SIZE + task_stack_page(c_idle.idle))) - 1);
+ init_idle(c_idle.idle, cpu);
+ goto do_rest;
+ }
+
+ if (!keventd_up() || current_is_keventd())
+ c_idle.work.func(&c_idle.work);
+ else {
+ schedule_work(&c_idle.work);
+ wait_for_completion(&c_idle.done);
+ }
+
+ if (IS_ERR(c_idle.idle)) {
+ printk("failed fork for CPU %d\n", cpu);
+ return PTR_ERR(c_idle.idle);
+ }
+
+ set_idle_for_cpu(cpu, c_idle.idle);
+do_rest:
+#ifdef CONFIG_X86_32
+ per_cpu(current_task, cpu) = c_idle.idle;
+ init_gdt(cpu);
+ early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
+ c_idle.idle->thread.ip = (unsigned long) start_secondary;
+ /* Stack for startup_32 can be just as for start_secondary onwards */
+ stack_start.sp = (void *) c_idle.idle->thread.sp;
+ irq_ctx_init(cpu);
+#else
+ cpu_pda(cpu)->pcurrent = c_idle.idle;
+ init_rsp = c_idle.idle->thread.sp;
+ load_sp0(&per_cpu(init_tss, cpu), &c_idle.idle->thread);
+ initial_code = (unsigned long)start_secondary;
+ clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
+#endif
+
+ /* start_ip had better be page-aligned! */
+ start_ip = setup_trampoline();
+
+ /* So we see what's up */
+ printk(KERN_INFO "Booting processor %d/%d ip %lx\n",
+ cpu, apicid, start_ip);
+
+ /*
+ * This grunge runs the startup process for
+ * the targeted processor.
+ */
+
+ atomic_set(&init_deasserted, 0);
+
+ Dprintk("Setting warm reset code and vector.\n");
+
+ store_NMI_vector(&nmi_high, &nmi_low);
+
+ smpboot_setup_warm_reset_vector(start_ip);
+ /*
+ * Be paranoid about clearing APIC errors.
+ */
+ apic_write(APIC_ESR, 0);
+ apic_read(APIC_ESR);
+
+
+ /*
+ * Starting actual IPI sequence...
+ */
+ boot_error = wakeup_secondary_cpu(apicid, start_ip);
+
+ if (!boot_error) {
+ /*
+ * allow APs to start initializing.
+ */
+ Dprintk("Before Callout %d.\n", cpu);
+ cpu_set(cpu, cpu_callout_map);
+ Dprintk("After Callout %d.\n", cpu);
+
+ /*
+ * Wait 5s total for a response
+ */
+ for (timeout = 0; timeout < 50000; timeout++) {
+ if (cpu_isset(cpu, cpu_callin_map))
+ break; /* It has booted */
+ udelay(100);
+ }
+
+ if (cpu_isset(cpu, cpu_callin_map)) {
+ /* number CPUs logically, starting from 1 (BSP is 0) */
+ Dprintk("OK.\n");
+ printk(KERN_INFO "CPU%d: ", cpu);
+ print_cpu_info(&cpu_data(cpu));
+ Dprintk("CPU has booted.\n");
+ } else {
+ boot_error = 1;
+ if (*((volatile unsigned char *)trampoline_base)
+ == 0xA5)
+ /* trampoline started but...? */
+ printk(KERN_ERR "Stuck ??\n");
+ else
+ /* trampoline code not run */
+ printk(KERN_ERR "Not responding.\n");
+ inquire_remote_apic(apicid);
+ }
+ }
+
+ if (boot_error) {
+ /* Try to put things back the way they were before ... */
+ unmap_cpu_to_logical_apicid(cpu);
+#ifdef CONFIG_X86_64
+ clear_node_cpumask(cpu); /* was set by numa_add_cpu */
+#endif
+ cpu_clear(cpu, cpu_callout_map); /* was set by do_boot_cpu() */
+ cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */
+ cpu_clear(cpu, cpu_possible_map);
+ cpu_clear(cpu, cpu_present_map);
+ per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID;
+ }
+
+ /* mark "stuck" area as not stuck */
+ *((volatile unsigned long *)trampoline_base) = 0;
+
+ return boot_error;
+}
+
+int __cpuinit native_cpu_up(unsigned int cpu)
+{
+ int apicid = cpu_present_to_apicid(cpu);
+ unsigned long flags;
+ int err;
+
+ WARN_ON(irqs_disabled());
+
+ Dprintk("++++++++++++++++++++=_---CPU UP %u\n", cpu);
+
+ if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid ||
+ !physid_isset(apicid, phys_cpu_present_map)) {
+ printk(KERN_ERR "%s: bad cpu %d\n", __func__, cpu);
+ return -EINVAL;
+ }
+
+ /*
+ * Already booted CPU?
+ */
+ if (cpu_isset(cpu, cpu_callin_map)) {
+ Dprintk("do_boot_cpu %d Already started\n", cpu);
+ return -ENOSYS;
+ }
+
+ /*
+ * Save current MTRR state in case it was changed since early boot
+ * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync:
+ */
+ mtrr_save_state();
+
+ per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
+
+#ifdef CONFIG_X86_32
+ /* init low mem mapping */
+ clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS,
+ min_t(unsigned long, KERNEL_PGD_PTRS, USER_PGD_PTRS));
+ flush_tlb_all();
+#endif
+
+ err = do_boot_cpu(apicid, cpu);
+ if (err < 0) {
+ Dprintk("do_boot_cpu failed %d\n", err);
+ return err;
+ }
+
+ /*
+ * Check TSC synchronization with the AP (keep irqs disabled
+ * while doing so):
+ */
+ local_irq_save(flags);
+ check_tsc_sync_source(cpu);
+ local_irq_restore(flags);
+
+ while (!cpu_isset(cpu, cpu_online_map)) {
+ cpu_relax();
+ touch_nmi_watchdog();
+ }
+
+ return 0;
+}
+
#ifdef CONFIG_HOTPLUG_CPU
void remove_siblinginfo(int cpu)
{