aboutsummaryrefslogtreecommitdiff
path: root/arch/x86
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86')
-rw-r--r--arch/x86/Kconfig30
-rw-r--r--arch/x86/Kconfig.cpu13
-rw-r--r--arch/x86/boot/cpucheck.c8
-rw-r--r--arch/x86/configs/i386_defconfig303
-rw-r--r--arch/x86/configs/x86_64_defconfig258
-rw-r--r--arch/x86/kernel/alternative.c36
-rw-r--r--arch/x86/kernel/cpu/amd.c9
-rw-r--r--arch/x86/kernel/cpu/centaur.c11
-rw-r--r--arch/x86/kernel/cpu/common.c34
-rw-r--r--arch/x86/kernel/cpu/common_64.c74
-rw-r--r--arch/x86/kernel/cpu/cyrix.c32
-rw-r--r--arch/x86/kernel/cpu/feature_names.c3
-rw-r--r--arch/x86/kernel/e820.c2
-rw-r--r--arch/x86/kernel/hpet.c19
-rw-r--r--arch/x86/kernel/io_delay.c8
-rw-r--r--arch/x86/kernel/tsc.c234
-rw-r--r--arch/x86/kvm/paging_tmpl.h2
-rw-r--r--arch/x86/pci/i386.c87
-rw-r--r--arch/x86/xen/enlighten.c2
19 files changed, 715 insertions, 450 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 4c1475119ce..8e5e45a265d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -577,35 +577,29 @@ config SWIOTLB
config IOMMU_HELPER
def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
+
config MAXSMP
bool "Configure Maximum number of SMP Processors and NUMA Nodes"
- depends on X86_64 && SMP
+ depends on X86_64 && SMP && BROKEN
default n
help
Configure maximum number of CPUS and NUMA Nodes for this architecture.
If unsure, say N.
-if MAXSMP
-config NR_CPUS
- int
- default "4096"
-endif
-
-if !MAXSMP
config NR_CPUS
- int "Maximum number of CPUs (2-4096)"
- range 2 4096
+ int "Maximum number of CPUs (2-512)" if !MAXSMP
+ range 2 512
depends on SMP
+ default "4096" if MAXSMP
default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
default "8"
help
This allows you to specify the maximum number of CPUs which this
- kernel will support. The maximum supported value is 4096 and the
+ kernel will support. The maximum supported value is 512 and the
minimum value which makes sense is 2.
This is purely to save memory - each supported CPU adds
approximately eight kilobytes to the kernel image.
-endif
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
@@ -996,17 +990,10 @@ config NUMA_EMU
into virtual nodes when booted with "numa=fake=N", where N is the
number of nodes. This is only useful for debugging.
-if MAXSMP
-
config NODES_SHIFT
- int
- default "9"
-endif
-
-if !MAXSMP
-config NODES_SHIFT
- int "Maximum NUMA Nodes (as a power of 2)"
+ int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
range 1 9 if X86_64
+ default "9" if MAXSMP
default "6" if X86_64
default "4" if X86_NUMAQ
default "3"
@@ -1014,7 +1001,6 @@ config NODES_SHIFT
help
Specify the maximum number of NUMA Nodes available on the target
system. Increases memory reserved to accomodate various tables.
-endif
config HAVE_ARCH_BOOTMEM_NODE
def_bool y
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 2c518fbc52e..b225219c448 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -382,14 +382,17 @@ config X86_OOSTORE
# P6_NOPs are a relatively minor optimization that require a family >=
# 6 processor, except that it is broken on certain VIA chips.
# Furthermore, AMD chips prefer a totally different sequence of NOPs
-# (which work on all CPUs). As a result, disallow these if we're
-# compiling X86_GENERIC but not X86_64 (these NOPs do work on all
-# x86-64 capable chips); the list of processors in the right-hand clause
-# are the cores that benefit from this optimization.
+# (which work on all CPUs). In addition, it looks like Virtual PC
+# does not understand them.
+#
+# As a result, disallow these if we're not compiling for X86_64 (these
+# NOPs do work on all x86-64 capable chips); the list of processors in
+# the right-hand clause are the cores that benefit from this optimization.
#
config X86_P6_NOP
def_bool y
- depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || MPENTIUM4 || MPSC)
+ depends on X86_64
+ depends on (MCORE2 || MPENTIUM4 || MPSC)
config X86_TSC
def_bool y
diff --git a/arch/x86/boot/cpucheck.c b/arch/x86/boot/cpucheck.c
index 4b9ae7c5674..4d3ff037201 100644
--- a/arch/x86/boot/cpucheck.c
+++ b/arch/x86/boot/cpucheck.c
@@ -38,12 +38,12 @@ static const u32 req_flags[NCAPINTS] =
{
REQUIRED_MASK0,
REQUIRED_MASK1,
- REQUIRED_MASK2,
- REQUIRED_MASK3,
+ 0, /* REQUIRED_MASK2 not implemented in this file */
+ 0, /* REQUIRED_MASK3 not implemented in this file */
REQUIRED_MASK4,
- REQUIRED_MASK5,
+ 0, /* REQUIRED_MASK5 not implemented in this file */
REQUIRED_MASK6,
- REQUIRED_MASK7,
+ 0, /* REQUIRED_MASK7 not implemented in this file */
};
#define A32(a, b, c, d) (((d) << 24)+((c) << 16)+((b) << 8)+(a))
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 4d73f53287b..104275e191a 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1,13 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Sun May 4 19:59:02 2008
+# Linux kernel version: 2.6.27-rc4
+# Mon Aug 25 15:04:00 2008
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
-CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
@@ -53,6 +53,7 @@ CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
@@ -82,6 +83,7 @@ CONFIG_CGROUPS=y
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
@@ -105,7 +107,6 @@ CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -113,6 +114,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
@@ -132,27 +134,35 @@ CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -176,19 +186,17 @@ CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
+# CONFIG_X86_RDC321X is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
+# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
@@ -215,21 +223,19 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
-# CONFIG_X86_GENERIC is not set
+CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
-CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=6
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
@@ -247,7 +253,7 @@ CONFIG_X86_IO_APIC=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
-# CONFIG_X86_REBOOTFIXUPS is not set
+CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
@@ -256,32 +262,28 @@ CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
-CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-
-#
-# Memory hotplug is currently incompatible with Software Suspend
-#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-# CONFIG_HIGHPTE is not set
+CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
-# CONFIG_X86_PAT is not set
+# CONFIG_MTRR_SANITIZER is not set
+CONFIG_X86_PAT=y
CONFIG_EFI=y
# CONFIG_IRQBALANCE is not set
CONFIG_SECCOMP=y
@@ -293,6 +295,7 @@ CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
+# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x200000
@@ -312,6 +315,7 @@ CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
@@ -337,6 +341,7 @@ CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
@@ -395,8 +400,8 @@ CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
# CONFIG_PCI_GOOLPC is not set
+CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
@@ -448,10 +453,6 @@ CONFIG_HOTPLUG_PCI=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -475,7 +476,10 @@ CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
@@ -618,7 +622,6 @@ CONFIG_NET_SCHED=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
@@ -680,28 +683,19 @@ CONFIG_FIB_RULES=y
CONFIG_CFG80211=y
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=y
#
# Rate control algorithm selection
#
+CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -717,6 +711,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
@@ -749,6 +745,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
@@ -760,10 +757,12 @@ CONFIG_MISC_DEVICES=y
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_MSI_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -802,12 +801,13 @@ CONFIG_SCSI_WAIT_SCAN=m
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
@@ -842,7 +842,7 @@ CONFIG_PATA_AMD=y
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
+CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
@@ -852,7 +852,7 @@ CONFIG_PATA_AMD=y
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
+CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
@@ -871,6 +871,7 @@ CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
@@ -894,13 +895,16 @@ CONFIG_DM_ZERO=y
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -910,7 +914,23 @@ CONFIG_NETDEVICES=y
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
@@ -943,10 +963,10 @@ CONFIG_FORCEDETH=y
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
+CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
@@ -961,25 +981,24 @@ CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
+CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
+CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
+CONFIG_BNX2=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
@@ -1019,13 +1038,14 @@ CONFIG_WLAN_80211=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
-# CONFIG_IWLWIFI is not set
+# CONFIG_ATH9K is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
@@ -1105,6 +1125,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
@@ -1139,12 +1160,14 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
@@ -1173,6 +1196,7 @@ CONFIG_SERIO_LIBPS2=y
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -1223,8 +1247,8 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_AMD is not set
+CONFIG_HW_RANDOM_INTEL=y
+CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
@@ -1245,7 +1269,6 @@ CONFIG_NVRAM=y
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
@@ -1254,43 +1277,64 @@ CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
@@ -1299,6 +1343,8 @@ CONFIG_I2C_I801=y
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -1360,8 +1406,10 @@ CONFIG_SSB_POSSIBLE=y
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
@@ -1372,6 +1420,7 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
@@ -1418,7 +1467,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -1463,6 +1511,7 @@ CONFIG_FB_EFI=y
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
@@ -1470,6 +1519,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
+# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
#
# Display device support
@@ -1489,15 +1539,7 @@ CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
@@ -1515,20 +1557,14 @@ CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
@@ -1603,36 +1639,14 @@ CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
@@ -1668,6 +1682,7 @@ CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
#
# USB Host Controller Drivers
@@ -1691,6 +1706,7 @@ CONFIG_USB_UHCI_HCD=y
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1712,6 +1728,7 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
@@ -1720,7 +1737,6 @@ CONFIG_USB_LIBUSUAL=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
@@ -1733,7 +1749,6 @@ CONFIG_USB_MON=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1750,6 +1765,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1759,7 +1775,9 @@ CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
+# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
@@ -1805,6 +1823,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
@@ -1837,11 +1856,13 @@ CONFIG_DMADEVICES=y
# Firmware Drivers
#
# CONFIG_EDD is not set
+CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
-# CONFIG_ISCSI_IBFT_FIND is not set
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=y
#
# File systems
@@ -1920,14 +1941,27 @@ CONFIG_HUGETLB_PAGE=y
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
@@ -2001,9 +2035,9 @@ CONFIG_NLS_UTF8=y
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -2033,6 +2067,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
@@ -2043,23 +2078,32 @@ CONFIG_FRAME_POINTER=y
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SYSPROF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
-# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
+CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_4KSTACKS is not set
-CONFIG_X86_FIND_SMP_CONFIG=y
-CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
+# CONFIG_MMIOTRACE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
@@ -2071,6 +2115,7 @@ CONFIG_IO_DELAY_0X80=y
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
+# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
@@ -2080,7 +2125,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
@@ -2141,6 +2185,10 @@ CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -2151,7 +2199,7 @@ CONFIG_CRYPTO_SHA1=y
# Ciphers
#
CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_AES_586 is not set
+CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
@@ -2193,6 +2241,7 @@ CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index a4045242962..678c8acefe0 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1,13 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Sun May 4 19:59:57 2008
+# Linux kernel version: 2.6.27-rc4
+# Mon Aug 25 14:40:46 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
-CONFIG_DEFCONFIG_LIST="arch/x86/configs/x86_64_defconfig"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
@@ -53,6 +53,7 @@ CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
@@ -82,6 +83,7 @@ CONFIG_CGROUPS=y
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
@@ -105,7 +107,6 @@ CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -113,6 +114,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
@@ -132,25 +134,33 @@ CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
@@ -175,20 +185,15 @@ CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_PARAVIRT_GUEST is not set
-CONFIG_MEMTEST_BOOTPARAM=y
-CONFIG_MEMTEST_BOOTPARAM_VALUE=0
+# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
@@ -220,11 +225,12 @@ CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_GOOD_APIC=y
+CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
@@ -234,8 +240,10 @@ CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
+CONFIG_AMD_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
+# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
@@ -281,6 +289,7 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
+# CONFIG_MTRR_SANITIZER is not set
# CONFIG_X86_PAT is not set
CONFIG_EFI=y
CONFIG_SECCOMP=y
@@ -313,6 +322,7 @@ CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
@@ -339,6 +349,7 @@ CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
@@ -437,10 +448,6 @@ CONFIG_IA32_EMULATION=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -464,7 +471,10 @@ CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
@@ -607,7 +617,6 @@ CONFIG_NET_SCHED=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
@@ -669,28 +678,19 @@ CONFIG_FIB_RULES=y
CONFIG_CFG80211=y
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=y
#
# Rate control algorithm selection
#
+CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -706,6 +706,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
@@ -738,6 +740,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
@@ -748,10 +751,14 @@ CONFIG_MISC_DEVICES=y
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_SGI_XP is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_SGI_GRU is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -790,12 +797,13 @@ CONFIG_SCSI_WAIT_SCAN=m
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
@@ -857,6 +865,7 @@ CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
@@ -880,13 +889,16 @@ CONFIG_DM_ZERO=y
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -896,7 +908,23 @@ CONFIG_NETDEVICES=y
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
@@ -940,16 +968,15 @@ CONFIG_8139TOO_PIO=y
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
@@ -965,6 +992,7 @@ CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
@@ -1003,13 +1031,14 @@ CONFIG_WLAN_80211=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
-# CONFIG_IWLWIFI is not set
+# CONFIG_ATH9K is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
@@ -1088,6 +1117,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
@@ -1122,12 +1152,14 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
@@ -1155,6 +1187,7 @@ CONFIG_SERIO_LIBPS2=y
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -1222,7 +1255,6 @@ CONFIG_NVRAM=y
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
@@ -1231,42 +1263,63 @@ CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
@@ -1275,6 +1328,8 @@ CONFIG_I2C_I801=y
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -1335,8 +1390,10 @@ CONFIG_SSB_POSSIBLE=y
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
@@ -1347,6 +1404,7 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
@@ -1387,7 +1445,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -1430,6 +1487,7 @@ CONFIG_FB_EFI=y
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
@@ -1437,6 +1495,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
+# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
#
# Display device support
@@ -1456,15 +1515,7 @@ CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
@@ -1482,20 +1533,14 @@ CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
@@ -1568,36 +1613,14 @@ CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
@@ -1633,6 +1656,7 @@ CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
#
# USB Host Controller Drivers
@@ -1656,6 +1680,7 @@ CONFIG_USB_UHCI_HCD=y
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1677,6 +1702,7 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
@@ -1685,7 +1711,6 @@ CONFIG_USB_LIBUSUAL=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
@@ -1698,7 +1723,6 @@ CONFIG_USB_MON=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1715,6 +1739,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1724,7 +1749,9 @@ CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
+# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
@@ -1770,6 +1797,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
@@ -1802,11 +1830,13 @@ CONFIG_DMADEVICES=y
# Firmware Drivers
#
# CONFIG_EDD is not set
+CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
-# CONFIG_ISCSI_IBFT_FIND is not set
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=y
#
# File systems
@@ -1886,14 +1916,27 @@ CONFIG_HUGETLB_PAGE=y
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
@@ -1967,9 +2010,9 @@ CONFIG_NLS_UTF8=y
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1998,6 +2041,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
@@ -2008,11 +2052,20 @@ CONFIG_FRAME_POINTER=y
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SYSPROF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
-# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
+CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
@@ -2023,8 +2076,8 @@ CONFIG_DEBUG_RODATA=y
# CONFIG_DIRECT_GBPAGES is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
-CONFIG_X86_MPPARSE=y
# CONFIG_IOMMU_DEBUG is not set
+# CONFIG_MMIOTRACE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
@@ -2036,6 +2089,7 @@ CONFIG_IO_DELAY_0X80=y
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
+# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
@@ -2045,7 +2099,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
@@ -2106,6 +2159,10 @@ CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -2155,6 +2212,7 @@ CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 2763cb37b55..65a0c1b4869 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -145,35 +145,25 @@ static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
extern char __vsyscall_0;
const unsigned char *const *find_nop_table(void)
{
- return boot_cpu_data.x86_vendor != X86_VENDOR_INTEL ||
- boot_cpu_data.x86 < 6 ? k8_nops : p6_nops;
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+ boot_cpu_has(X86_FEATURE_NOPL))
+ return p6_nops;
+ else
+ return k8_nops;
}
#else /* CONFIG_X86_64 */
-static const struct nop {
- int cpuid;
- const unsigned char *const *noptable;
-} noptypes[] = {
- { X86_FEATURE_K8, k8_nops },
- { X86_FEATURE_K7, k7_nops },
- { X86_FEATURE_P4, p6_nops },
- { X86_FEATURE_P3, p6_nops },
- { -1, NULL }
-};
-
const unsigned char *const *find_nop_table(void)
{
- const unsigned char *const *noptable = intel_nops;
- int i;
-
- for (i = 0; noptypes[i].cpuid >= 0; i++) {
- if (boot_cpu_has(noptypes[i].cpuid)) {
- noptable = noptypes[i].noptable;
- break;
- }
- }
- return noptable;
+ if (boot_cpu_has(X86_FEATURE_K8))
+ return k8_nops;
+ else if (boot_cpu_has(X86_FEATURE_K7))
+ return k7_nops;
+ else if (boot_cpu_has(X86_FEATURE_NOPL))
+ return p6_nops;
+ else
+ return intel_nops;
}
#endif /* CONFIG_X86_64 */
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index cae9cabc303..18514ed2610 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -31,6 +31,11 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
if (c->x86_power & (1<<8))
set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
}
+
+ /* Set MTRR capability flag if appropriate */
+ if (c->x86_model == 13 || c->x86_model == 9 ||
+ (c->x86_model == 8 && c->x86_mask >= 8))
+ set_cpu_cap(c, X86_FEATURE_K6_MTRR);
}
static void __cpuinit init_amd(struct cpuinfo_x86 *c)
@@ -166,10 +171,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
mbytes);
}
- /* Set MTRR capability flag if appropriate */
- if (c->x86_model == 13 || c->x86_model == 9 ||
- (c->x86_model == 8 && c->x86_mask >= 8))
- set_cpu_cap(c, X86_FEATURE_K6_MTRR);
break;
}
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index e0f45edd6a5..a0534c04d38 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -314,6 +314,16 @@ enum {
EAMD3D = 1<<20,
};
+static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
+{
+ switch (c->x86) {
+ case 5:
+ /* Emulate MTRRs using Centaur's MCR. */
+ set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR);
+ break;
+ }
+}
+
static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
{
@@ -462,6 +472,7 @@ centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size)
static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
.c_vendor = "Centaur",
.c_ident = { "CentaurHauls" },
+ .c_early_init = early_init_centaur,
.c_init = init_centaur,
.c_size_cache = centaur_size_cache,
};
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 80ab20d4fa3..8aab8517642 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -13,6 +13,7 @@
#include <asm/mtrr.h>
#include <asm/mce.h>
#include <asm/pat.h>
+#include <asm/asm.h>
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/mpspec.h>
#include <asm/apic.h>
@@ -334,11 +335,40 @@ static void __init early_cpu_detect(void)
get_cpu_vendor(c, 1);
+ early_get_cap(c);
+
if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
cpu_devs[c->x86_vendor]->c_early_init)
cpu_devs[c->x86_vendor]->c_early_init(c);
+}
- early_get_cap(c);
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6, unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect. Hence, probe for it based on first
+ * principles.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+ const u32 nopl_signature = 0x888c53b1; /* Random number */
+ u32 has_nopl = nopl_signature;
+
+ clear_cpu_cap(c, X86_FEATURE_NOPL);
+ if (c->x86 >= 6) {
+ asm volatile("\n"
+ "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
+ "2:\n"
+ " .section .fixup,\"ax\"\n"
+ "3: xor %0,%0\n"
+ " jmp 2b\n"
+ " .previous\n"
+ _ASM_EXTABLE(1b,3b)
+ : "+a" (has_nopl));
+
+ if (has_nopl == nopl_signature)
+ set_cpu_cap(c, X86_FEATURE_NOPL);
+ }
}
static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
@@ -395,8 +425,8 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
}
init_scattered_cpuid_features(c);
+ detect_nopl(c);
}
-
}
static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c
index dd6e3f15017..a11f5d4477c 100644
--- a/arch/x86/kernel/cpu/common_64.c
+++ b/arch/x86/kernel/cpu/common_64.c
@@ -18,6 +18,7 @@
#include <asm/mtrr.h>
#include <asm/mce.h>
#include <asm/pat.h>
+#include <asm/asm.h>
#include <asm/numa.h>
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/mpspec.h>
@@ -215,6 +216,39 @@ static void __init early_cpu_support_print(void)
}
}
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6, unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect. Hence, probe for it based on first
+ * principles.
+ *
+ * Note: no 64-bit chip is known to lack these, but put the code here
+ * for consistency with 32 bits, and to make it utterly trivial to
+ * diagnose the problem should it ever surface.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+ const u32 nopl_signature = 0x888c53b1; /* Random number */
+ u32 has_nopl = nopl_signature;
+
+ clear_cpu_cap(c, X86_FEATURE_NOPL);
+ if (c->x86 >= 6) {
+ asm volatile("\n"
+ "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
+ "2:\n"
+ " .section .fixup,\"ax\"\n"
+ "3: xor %0,%0\n"
+ " jmp 2b\n"
+ " .previous\n"
+ _ASM_EXTABLE(1b,3b)
+ : "+a" (has_nopl));
+
+ if (has_nopl == nopl_signature)
+ set_cpu_cap(c, X86_FEATURE_NOPL);
+ }
+}
+
static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
void __init early_cpu_init(void)
@@ -313,6 +347,8 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
c->x86_phys_bits = eax & 0xff;
}
+ detect_nopl(c);
+
if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
cpu_devs[c->x86_vendor]->c_early_init)
cpu_devs[c->x86_vendor]->c_early_init(c);
@@ -493,17 +529,20 @@ void pda_init(int cpu)
/* others are initialized in smpboot.c */
pda->pcurrent = &init_task;
pda->irqstackptr = boot_cpu_stack;
+ pda->irqstackptr += IRQSTACKSIZE - 64;
} else {
- pda->irqstackptr = (char *)
- __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
- if (!pda->irqstackptr)
- panic("cannot allocate irqstack for cpu %d", cpu);
+ if (!pda->irqstackptr) {
+ pda->irqstackptr = (char *)
+ __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
+ if (!pda->irqstackptr)
+ panic("cannot allocate irqstack for cpu %d",
+ cpu);
+ pda->irqstackptr += IRQSTACKSIZE - 64;
+ }
if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
pda->nodenumber = cpu_to_node(cpu);
}
-
- pda->irqstackptr += IRQSTACKSIZE-64;
}
char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
@@ -601,19 +640,22 @@ void __cpuinit cpu_init(void)
/*
* set up and load the per-CPU TSS
*/
- for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+ if (!orig_ist->ist[0]) {
static const unsigned int order[N_EXCEPTION_STACKS] = {
- [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
- [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
+ [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
+ [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
};
- if (cpu) {
- estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
- if (!estacks)
- panic("Cannot allocate exception stack %ld %d\n",
- v, cpu);
+ for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+ if (cpu) {
+ estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
+ if (!estacks)
+ panic("Cannot allocate exception "
+ "stack %ld %d\n", v, cpu);
+ }
+ estacks += PAGE_SIZE << order[v];
+ orig_ist->ist[v] = t->x86_tss.ist[v] =
+ (unsigned long)estacks;
}
- estacks += PAGE_SIZE << order[v];
- orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks;
}
t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index e710a21bb6e..898a5a2002e 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -15,13 +15,11 @@
/*
* Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
*/
-static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+static void __cpuinit __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
{
unsigned char ccr2, ccr3;
- unsigned long flags;
/* we test for DEVID by checking whether CCR3 is writable */
- local_irq_save(flags);
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, ccr3 ^ 0x80);
getCx86(0xc0); /* dummy to change bus */
@@ -44,9 +42,16 @@ static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
*dir0 = getCx86(CX86_DIR0);
*dir1 = getCx86(CX86_DIR1);
}
- local_irq_restore(flags);
}
+static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ __do_cyrix_devid(dir0, dir1);
+ local_irq_restore(flags);
+}
/*
* Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
* order to identify the Cyrix CPU model after we're out of setup.c
@@ -161,6 +166,24 @@ static void __cpuinit geode_configure(void)
local_irq_restore(flags);
}
+static void __cpuinit early_init_cyrix(struct cpuinfo_x86 *c)
+{
+ unsigned char dir0, dir0_msn, dir1 = 0;
+
+ __do_cyrix_devid(&dir0, &dir1);
+ dir0_msn = dir0 >> 4; /* identifies CPU "family" */
+
+ switch (dir0_msn) {
+ case 3: /* 6x86/6x86L */
+ /* Emulate MTRRs using Cyrix's ARRs. */
+ set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+ break;
+ case 5: /* 6x86MX/M II */
+ /* Emulate MTRRs using Cyrix's ARRs. */
+ set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+ break;
+ }
+}
static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
{
@@ -416,6 +439,7 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c)
static struct cpu_dev cyrix_cpu_dev __cpuinitdata = {
.c_vendor = "Cyrix",
.c_ident = { "CyrixInstead" },
+ .c_early_init = early_init_cyrix,
.c_init = init_cyrix,
.c_identify = cyrix_identify,
};
diff --git a/arch/x86/kernel/cpu/feature_names.c b/arch/x86/kernel/cpu/feature_names.c
index e43ad4ad4cb..c9017799497 100644
--- a/arch/x86/kernel/cpu/feature_names.c
+++ b/arch/x86/kernel/cpu/feature_names.c
@@ -39,7 +39,8 @@ const char * const x86_cap_flags[NCAPINTS*32] = {
NULL, NULL, NULL, NULL,
"constant_tsc", "up", NULL, "arch_perfmon",
"pebs", "bts", NULL, NULL,
- "rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ "rep_good", NULL, NULL, NULL,
+ "nopl", NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* Intel-defined (#2) */
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 9af89078f7b..66e48aa2dd1 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1203,7 +1203,7 @@ static int __init parse_memmap_opt(char *p)
if (!p)
return -EINVAL;
- if (!strcmp(p, "exactmap")) {
+ if (!strncmp(p, "exactmap", 8)) {
#ifdef CONFIG_CRASH_DUMP
/*
* If we are doing a crash dump, we still need to know
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 59fd3b6b130..73deaffadd0 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -210,8 +210,8 @@ static void hpet_legacy_clockevent_register(void)
/* Calculate the min / max delta */
hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
&hpet_clockevent);
- hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30,
- &hpet_clockevent);
+ /* 5 usec minimum reprogramming delta. */
+ hpet_clockevent.min_delta_ns = 5000;
/*
* Start hpet with the boot cpu mask and make it
@@ -270,15 +270,22 @@ static void hpet_legacy_set_mode(enum clock_event_mode mode,
}
static int hpet_legacy_next_event(unsigned long delta,
- struct clock_event_device *evt)
+ struct clock_event_device *evt)
{
- unsigned long cnt;
+ u32 cnt;
cnt = hpet_readl(HPET_COUNTER);
- cnt += delta;
+ cnt += (u32) delta;
hpet_writel(cnt, HPET_T0_CMP);
- return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0;
+ /*
+ * We need to read back the CMP register to make sure that
+ * what we wrote hit the chip before we compare it to the
+ * counter.
+ */
+ WARN_ON((u32)hpet_readl(HPET_T0_CMP) != cnt);
+
+ return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
}
/*
diff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c
index 1c3a66a67f8..720d2607aac 100644
--- a/arch/x86/kernel/io_delay.c
+++ b/arch/x86/kernel/io_delay.c
@@ -92,6 +92,14 @@ static struct dmi_system_id __initdata io_delay_0xed_port_dmi_table[] = {
DMI_MATCH(DMI_BOARD_NAME, "30BF")
}
},
+ {
+ .callback = dmi_io_delay_0xed_port,
+ .ident = "Presario F700",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
+ DMI_MATCH(DMI_BOARD_NAME, "30D3")
+ }
+ },
{ }
};
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 8e786b0d665..8f98e9de1b8 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -122,80 +122,216 @@ static u64 tsc_read_refs(u64 *pm, u64 *hpet)
return ULLONG_MAX;
}
-/**
- * native_calibrate_tsc - calibrate the tsc on boot
+/*
+ * Try to calibrate the TSC against the Programmable
+ * Interrupt Timer and return the frequency of the TSC
+ * in kHz.
+ *
+ * Return ULONG_MAX on failure to calibrate.
*/
-unsigned long native_calibrate_tsc(void)
+static unsigned long pit_calibrate_tsc(void)
{
- unsigned long flags;
- u64 tsc1, tsc2, tr1, tr2, delta, pm1, pm2, hpet1, hpet2;
- int hpet = is_hpet_enabled();
- unsigned int tsc_khz_val = 0;
-
- local_irq_save(flags);
-
- tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
+ u64 tsc, t1, t2, delta;
+ unsigned long tscmin, tscmax;
+ int pitcnt;
+ /* Set the Gate high, disable speaker */
outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+ /*
+ * Setup CTC channel 2* for mode 0, (interrupt on terminal
+ * count mode), binary count. Set the latch register to 50ms
+ * (LSB then MSB) to begin countdown.
+ */
outb(0xb0, 0x43);
outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
- tr1 = get_cycles();
- while ((inb(0x61) & 0x20) == 0);
- tr2 = get_cycles();
- tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+ tsc = t1 = t2 = get_cycles();
- local_irq_restore(flags);
+ pitcnt = 0;
+ tscmax = 0;
+ tscmin = ULONG_MAX;
+ while ((inb(0x61) & 0x20) == 0) {
+ t2 = get_cycles();
+ delta = t2 - tsc;
+ tsc = t2;
+ if ((unsigned long) delta < tscmin)
+ tscmin = (unsigned int) delta;
+ if ((unsigned long) delta > tscmax)
+ tscmax = (unsigned int) delta;
+ pitcnt++;
+ }
/*
- * Preset the result with the raw and inaccurate PIT
- * calibration value
+ * Sanity checks:
+ *
+ * If we were not able to read the PIT more than 5000
+ * times, then we have been hit by a massive SMI
+ *
+ * If the maximum is 10 times larger than the minimum,
+ * then we got hit by an SMI as well.
*/
- delta = (tr2 - tr1);
+ if (pitcnt < 5000 || tscmax > 10 * tscmin)
+ return ULONG_MAX;
+
+ /* Calculate the PIT value */
+ delta = t2 - t1;
do_div(delta, 50);
- tsc_khz_val = delta;
+ return delta;
+}
+
+
+/**
+ * native_calibrate_tsc - calibrate the tsc on boot
+ */
+unsigned long native_calibrate_tsc(void)
+{
+ u64 tsc1, tsc2, delta, pm1, pm2, hpet1, hpet2;
+ unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX;
+ unsigned long flags;
+ int hpet = is_hpet_enabled(), i;
- /* hpet or pmtimer available ? */
+ /*
+ * Run 5 calibration loops to get the lowest frequency value
+ * (the best estimate). We use two different calibration modes
+ * here:
+ *
+ * 1) PIT loop. We set the PIT Channel 2 to oneshot mode and
+ * load a timeout of 50ms. We read the time right after we
+ * started the timer and wait until the PIT count down reaches
+ * zero. In each wait loop iteration we read the TSC and check
+ * the delta to the previous read. We keep track of the min
+ * and max values of that delta. The delta is mostly defined
+ * by the IO time of the PIT access, so we can detect when a
+ * SMI/SMM disturbance happend between the two reads. If the
+ * maximum time is significantly larger than the minimum time,
+ * then we discard the result and have another try.
+ *
+ * 2) Reference counter. If available we use the HPET or the
+ * PMTIMER as a reference to check the sanity of that value.
+ * We use separate TSC readouts and check inside of the
+ * reference read for a SMI/SMM disturbance. We dicard
+ * disturbed values here as well. We do that around the PIT
+ * calibration delay loop as we have to wait for a certain
+ * amount of time anyway.
+ */
+ for (i = 0; i < 5; i++) {
+ unsigned long tsc_pit_khz;
+
+ /*
+ * Read the start value and the reference count of
+ * hpet/pmtimer when available. Then do the PIT
+ * calibration, which will take at least 50ms, and
+ * read the end value.
+ */
+ local_irq_save(flags);
+ tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
+ tsc_pit_khz = pit_calibrate_tsc();
+ tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+ local_irq_restore(flags);
+
+ /* Pick the lowest PIT TSC calibration so far */
+ tsc_pit_min = min(tsc_pit_min, tsc_pit_khz);
+
+ /* hpet or pmtimer available ? */
+ if (!hpet && !pm1 && !pm2)
+ continue;
+
+ /* Check, whether the sampling was disturbed by an SMI */
+ if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX)
+ continue;
+
+ tsc2 = (tsc2 - tsc1) * 1000000LL;
+
+ if (hpet) {
+ if (hpet2 < hpet1)
+ hpet2 += 0x100000000ULL;
+ hpet2 -= hpet1;
+ tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
+ do_div(tsc1, 1000000);
+ } else {
+ if (pm2 < pm1)
+ pm2 += (u64)ACPI_PM_OVRRUN;
+ pm2 -= pm1;
+ tsc1 = pm2 * 1000000000LL;
+ do_div(tsc1, PMTMR_TICKS_PER_SEC);
+ }
+
+ do_div(tsc2, tsc1);
+ tsc_ref_min = min(tsc_ref_min, (unsigned long) tsc2);
+ }
+
+ /*
+ * Now check the results.
+ */
+ if (tsc_pit_min == ULONG_MAX) {
+ /* PIT gave no useful value */
+ printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n");
+
+ /* We don't have an alternative source, disable TSC */
+ if (!hpet && !pm1 && !pm2) {
+ printk("TSC: No reference (HPET/PMTIMER) available\n");
+ return 0;
+ }
+
+ /* The alternative source failed as well, disable TSC */
+ if (tsc_ref_min == ULONG_MAX) {
+ printk(KERN_WARNING "TSC: HPET/PMTIMER calibration "
+ "failed due to SMI disturbance.\n");
+ return 0;
+ }
+
+ /* Use the alternative source */
+ printk(KERN_INFO "TSC: using %s reference calibration\n",
+ hpet ? "HPET" : "PMTIMER");
+
+ return tsc_ref_min;
+ }
+
+ /* We don't have an alternative source, use the PIT calibration value */
if (!hpet && !pm1 && !pm2) {
- printk(KERN_INFO "TSC calibrated against PIT\n");
- goto out;
+ printk(KERN_INFO "TSC: Using PIT calibration value\n");
+ return tsc_pit_min;
}
- /* Check, whether the sampling was disturbed by an SMI */
- if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) {
- printk(KERN_WARNING "TSC calibration disturbed by SMI, "
- "using PIT calibration result\n");
- goto out;
+ /* The alternative source failed, use the PIT calibration value */
+ if (tsc_ref_min == ULONG_MAX) {
+ printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed due "
+ "to SMI disturbance. Using PIT calibration\n");
+ return tsc_pit_min;
}
- tsc2 = (tsc2 - tsc1) * 1000000LL;
-
- if (hpet) {
- printk(KERN_INFO "TSC calibrated against HPET\n");
- if (hpet2 < hpet1)
- hpet2 += 0x100000000ULL;
- hpet2 -= hpet1;
- tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
- do_div(tsc1, 1000000);
- } else {
- printk(KERN_INFO "TSC calibrated against PM_TIMER\n");
- if (pm2 < pm1)
- pm2 += (u64)ACPI_PM_OVRRUN;
- pm2 -= pm1;
- tsc1 = pm2 * 1000000000LL;
- do_div(tsc1, PMTMR_TICKS_PER_SEC);
+ /* Check the reference deviation */
+ delta = ((u64) tsc_pit_min) * 100;
+ do_div(delta, tsc_ref_min);
+
+ /*
+ * If both calibration results are inside a 5% window, the we
+ * use the lower frequency of those as it is probably the
+ * closest estimate.
+ */
+ if (delta >= 95 && delta <= 105) {
+ printk(KERN_INFO "TSC: PIT calibration confirmed by %s.\n",
+ hpet ? "HPET" : "PMTIMER");
+ printk(KERN_INFO "TSC: using %s calibration value\n",
+ tsc_pit_min <= tsc_ref_min ? "PIT" :
+ hpet ? "HPET" : "PMTIMER");
+ return tsc_pit_min <= tsc_ref_min ? tsc_pit_min : tsc_ref_min;
}
- do_div(tsc2, tsc1);
- tsc_khz_val = tsc2;
+ printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n",
+ hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
-out:
- return tsc_khz_val;
+ /*
+ * The calibration values differ too much. In doubt, we use
+ * the PIT value as we know that there are PMTIMERs around
+ * running at double speed.
+ */
+ printk(KERN_INFO "TSC: Using PIT calibration value\n");
+ return tsc_pit_min;
}
-
#ifdef CONFIG_X86_32
/* Only called from the Powernow K7 cpu freq driver */
int recalibrate_cpu_khz(void)
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index f72ac1fa35f..4a814bff21f 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -345,7 +345,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
shadow_addr = __pa(shadow_page->spt);
shadow_pte = shadow_addr | PT_PRESENT_MASK | PT_ACCESSED_MASK
| PT_WRITABLE_MASK | PT_USER_MASK;
- *shadow_ent = shadow_pte;
+ set_shadow_pte(shadow_ent, shadow_pte);
}
mmu_set_spte(vcpu, shadow_ent, access, walker->pte_access & access,
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index d765da91384..8791fc55e71 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -31,11 +31,8 @@
#include <linux/ioport.h>
#include <linux/errno.h>
#include <linux/bootmem.h>
-#include <linux/acpi.h>
#include <asm/pat.h>
-#include <asm/hpet.h>
-#include <asm/io_apic.h>
#include "pci.h"
@@ -80,77 +77,6 @@ pcibios_align_resource(void *data, struct resource *res,
}
EXPORT_SYMBOL(pcibios_align_resource);
-static int check_res_with_valid(struct pci_dev *dev, struct resource *res)
-{
- unsigned long base;
- unsigned long size;
- int i;
-
- base = res->start;
- size = (res->start == 0 && res->end == res->start) ? 0 :
- (res->end - res->start + 1);
-
- if (!base || !size)
- return 0;
-
-#ifdef CONFIG_HPET_TIMER
- /* for hpet */
- if (base == hpet_address && (res->flags & IORESOURCE_MEM)) {
- dev_info(&dev->dev, "BAR has HPET at %08lx-%08lx\n",
- base, base + size - 1);
- return 1;
- }
-#endif
-
-#ifdef CONFIG_X86_IO_APIC
- for (i = 0; i < nr_ioapics; i++) {
- unsigned long ioapic_phys = mp_ioapics[i].mp_apicaddr;
-
- if (base == ioapic_phys && (res->flags & IORESOURCE_MEM)) {
- dev_info(&dev->dev, "BAR has ioapic at %08lx-%08lx\n",
- base, base + size - 1);
- return 1;
- }
- }
-#endif
-
-#ifdef CONFIG_PCI_MMCONFIG
- for (i = 0; i < pci_mmcfg_config_num; i++) {
- unsigned long addr;
-
- addr = pci_mmcfg_config[i].address;
- if (base == addr && (res->flags & IORESOURCE_MEM)) {
- dev_info(&dev->dev, "BAR has MMCONFIG at %08lx-%08lx\n",
- base, base + size - 1);
- return 1;
- }
- }
-#endif
-
- return 0;
-}
-
-static int check_platform(struct pci_dev *dev, struct resource *res)
-{
- struct resource *root = NULL;
-
- /*
- * forcibly insert it into the
- * resource tree
- */
- if (res->flags & IORESOURCE_MEM)
- root = &iomem_resource;
- else if (res->flags & IORESOURCE_IO)
- root = &ioport_resource;
-
- if (root && check_res_with_valid(dev, res)) {
- insert_resource(root, res);
-
- return 1;
- }
-
- return 0;
-}
/*
* Handle resources of PCI devices. If the world were perfect, we could
* just allocate all the resource regions and do nothing more. It isn't.
@@ -202,10 +128,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
pr = pci_find_parent_resource(dev, r);
if (!r->start || !pr ||
request_resource(pr, r) < 0) {
- if (check_platform(dev, r))
- continue;
- dev_err(&dev->dev, "BAR %d: can't "
- "allocate resource\n", idx);
+ dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx);
/*
* Something is wrong with the region.
* Invalidate the resource to prevent
@@ -240,17 +163,13 @@ static void __init pcibios_allocate_resources(int pass)
else
disabled = !(command & PCI_COMMAND_MEMORY);
if (pass == disabled) {
- dev_dbg(&dev->dev, "resource %#08llx-%#08llx "
- "(f=%lx, d=%d, p=%d)\n",
+ dev_dbg(&dev->dev, "resource %#08llx-%#08llx (f=%lx, d=%d, p=%d)\n",
(unsigned long long) r->start,
(unsigned long long) r->end,
r->flags, disabled, pass);
pr = pci_find_parent_resource(dev, r);
if (!pr || request_resource(pr, r) < 0) {
- if (check_platform(dev, r))
- continue;
- dev_err(&dev->dev, "BAR %d: can't "
- "allocate resource\n", idx);
+ dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx);
/* We'll assign a new address later */
r->end -= r->start;
r->start = 0;
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 9ff6e3cbf08..a4e201b47f6 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1324,7 +1324,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
.ptep_modify_prot_commit = __ptep_modify_prot_commit,
.pte_val = xen_pte_val,
- .pte_flags = native_pte_val,
+ .pte_flags = native_pte_flags,
.pgd_val = xen_pgd_val,
.make_pte = xen_make_pte,
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 16:24:03 +0000