diff options
Diffstat (limited to 'arch/x86')
| -rw-r--r-- | arch/x86/kernel/Makefile | 2 | ||||
| -rw-r--r-- | arch/x86/kernel/mpparse.c (renamed from arch/x86/kernel/mpparse_32.c) | 20 | ||||
| -rw-r--r-- | arch/x86/kernel/mpparse_64.c | 991 |
3 files changed, 11 insertions, 1002 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 0bf2fb55aa7..fdd8395e0ed 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -51,7 +51,7 @@ obj-$(CONFIG_X86_SMP) += smpboot.o tsc_sync.o ipi.o tlb_$(BITS).o obj-$(CONFIG_X86_32_SMP) += smpcommon.o obj-$(CONFIG_X86_64_SMP) += tsc_sync.o smpcommon.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o -obj-$(CONFIG_X86_MPPARSE) += mpparse_$(BITS).o +obj-$(CONFIG_X86_MPPARSE) += mpparse.o obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi_$(BITS).o obj-$(CONFIG_X86_IO_APIC) += io_apic_$(BITS).o obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o diff --git a/arch/x86/kernel/mpparse_32.c b/arch/x86/kernel/mpparse.c index 6376791cffe..6e5e4547981 100644 --- a/arch/x86/kernel/mpparse_32.c +++ b/arch/x86/kernel/mpparse.c @@ -4,34 +4,33 @@ * * (c) 1995 Alan Cox, Building #3 <alan@redhat.com> * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com> - * - * Fixes - * Erich Boleyn : MP v1.4 and additional changes. - * Alan Cox : Added EBDA scanning - * Ingo Molnar : various cleanups and rewrites - * Maciej W. Rozycki: Bits for default MP configurations - * Paul Diefenbaugh: Added full ACPI support + * (c) 2008 Alexey Starikovskiy <astarikovskiy@suse.de> */ #include <linux/mm.h> #include <linux/init.h> -#include <linux/acpi.h> #include <linux/delay.h> #include <linux/bootmem.h> #include <linux/kernel_stat.h> #include <linux/mc146818rtc.h> #include <linux/bitops.h> +#include <linux/acpi.h> +#include <linux/module.h> #include <asm/smp.h> -#include <asm/acpi.h> #include <asm/mtrr.h> #include <asm/mpspec.h> +#include <asm/pgalloc.h> #include <asm/io_apic.h> +#include <asm/proto.h> +#include <asm/acpi.h> #include <asm/bios_ebda.h> #include <mach_apic.h> +#ifdef CONFIG_X86_32 #include <mach_apicdef.h> #include <mach_mpparse.h> +#endif /* Have we found an MP table */ int smp_found_config; @@ -43,8 +42,10 @@ int smp_found_config; #if defined (CONFIG_MCA) || defined (CONFIG_EISA) int mp_bus_id_to_type[MAX_MP_BUSSES]; #endif + DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 }; + static int mp_current_pci_id; int pic_mode; @@ -582,7 +583,6 @@ static void __init __get_smp_config(unsigned early) if (acpi_lapic && early) return; - /* * ACPI supports both logical (e.g. Hyper-Threading) and physical * processors, where MPS only supports physical. diff --git a/arch/x86/kernel/mpparse_64.c b/arch/x86/kernel/mpparse_64.c deleted file mode 100644 index 7d742577d68..00000000000 --- a/arch/x86/kernel/mpparse_64.c +++ /dev/null @@ -1,991 +0,0 @@ -/* - * Intel Multiprocessor Specification 1.1 and 1.4 - * compliant MP-table parsing routines. - * - * (c) 1995 Alan Cox, Building #3 <alan@redhat.com> - * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com> - * - * Fixes - * Erich Boleyn : MP v1.4 and additional changes. - * Alan Cox : Added EBDA scanning - * Ingo Molnar : various cleanups and rewrites - * Maciej W. Rozycki: Bits for default MP configurations - * Paul Diefenbaugh: Added full ACPI support - */ - -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/bootmem.h> -#include <linux/kernel_stat.h> -#include <linux/mc146818rtc.h> -#include <linux/acpi.h> -#include <linux/module.h> - -#include <asm/smp.h> -#include <asm/mtrr.h> -#include <asm/mpspec.h> -#include <asm/pgalloc.h> -#include <asm/io_apic.h> -#include <asm/proto.h> -#include <asm/acpi.h> -#include <asm/bios_ebda.h> - -#include <mach_apic.h> - -/* Have we found an MP table */ -int smp_found_config; - -/* - * Various Linux-internal data structures created from the - * MP-table. - */ -DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); -int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 }; - -static int mp_current_pci_id = 0; - -/* - * Intel MP BIOS table parsing routines: - */ - -/* - * Checksum an MP configuration block. - */ - -static int __init mpf_checksum(unsigned char *mp, int len) -{ - int sum = 0; - - while (len--) - sum += *mp++; - - return sum & 0xFF; -} - -static void __cpuinit MP_processor_info(struct mpc_config_processor *m) -{ - int apicid; - char *bootup_cpu = ""; - - if (!(m->mpc_cpuflag & CPU_ENABLED)) { - disabled_cpus++; - return; - } -#ifdef CONFIG_X86_NUMAQ - apicid = mpc_apic_id(m, translation_table[mpc_record]); -#else - apicid = m->mpc_apicid; -#endif - if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { - bootup_cpu = " (Bootup-CPU)"; - boot_cpu_physical_apicid = m->mpc_apicid; - } - - printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu); - generic_processor_info(apicid, m->mpc_apicver); -} - -static void __init MP_bus_info(struct mpc_config_bus *m) -{ - char str[7]; - - memcpy(str, m->mpc_bustype, 6); - str[6] = 0; - -#ifdef CONFIG_X86_NUMAQ - mpc_oem_bus_info(m, str, translation_table[mpc_record]); -#else - Dprintk("Bus #%d is %s\n", m->mpc_busid, str); -#endif - -#if MAX_MP_BUSSES < 256 - if (m->mpc_busid >= MAX_MP_BUSSES) { - printk(KERN_WARNING "MP table busid value (%d) for bustype %s " - " is too large, max. supported is %d\n", - m->mpc_busid, str, MAX_MP_BUSSES - 1); - return; - } -#endif - - if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) { - set_bit(m->mpc_busid, mp_bus_not_pci); -#if defined(CONFIG_EISA) || defined (CONFIG_MCA) - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA; -#endif - } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) { -#ifdef CONFIG_X86_NUMAQ - mpc_oem_pci_bus(m, translation_table[mpc_record]); -#endif - clear_bit(m->mpc_busid, mp_bus_not_pci); - mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id; - mp_current_pci_id++; -#if defined(CONFIG_EISA) || defined (CONFIG_MCA) - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI; - } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) { - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA; - } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA) - 1) == 0) { - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA; -#endif - } else - printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str); -} - -static int bad_ioapic(unsigned long address) -{ - if (nr_ioapics >= MAX_IO_APICS) { - printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " - "(found %d)\n", MAX_IO_APICS, nr_ioapics); - panic("Recompile kernel with bigger MAX_IO_APICS!\n"); - } - if (!address) { - printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" - " found in table, skipping!\n"); - return 1; - } - return 0; -} - -static void __init MP_ioapic_info(struct mpc_config_ioapic *m) -{ - if (!(m->mpc_flags & MPC_APIC_USABLE)) - return; - - printk(KERN_INFO "I/O APIC #%d at 0x%X.\n", m->mpc_apicid, - m->mpc_apicaddr); - - if (bad_ioapic(m->mpc_apicaddr)) - return; - - mp_ioapics[nr_ioapics] = *m; - nr_ioapics++; -} - -static void __init MP_intsrc_info(struct mpc_config_intsrc *m) -{ - mp_irqs[mp_irq_entries] = *m; - Dprintk("Int: type %d, pol %d, trig %d, bus %d," - " IRQ %02x, APIC ID %x, APIC INT %02x\n", - m->mpc_irqtype, m->mpc_irqflag & 3, - (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, - m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq); - if (++mp_irq_entries >= MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!!\n"); -} - -static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m) -{ - Dprintk("Lint: type %d, pol %d, trig %d, bus %d," - " IRQ %02x, APIC ID %x, APIC LINT %02x\n", - m->mpc_irqtype, m->mpc_irqflag & 3, - (m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid, - m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint); -} - -/* - * Read/parse the MPC - */ -static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) -{ - char str[16]; - char oem[10]; - int count = sizeof(*mpc); - unsigned char *mpt = ((unsigned char *)mpc) + count; - - if (memcmp(mpc->mpc_signature, MPC_SIGNATURE, 4)) { - printk(KERN_ERR "MPTABLE: bad signature [%c%c%c%c]!\n", - mpc->mpc_signature[0], mpc->mpc_signature[1], - mpc->mpc_signature[2], mpc->mpc_signature[3]); - return 0; - } - if (mpf_checksum((unsigned char *)mpc, mpc->mpc_length)) { - printk(KERN_ERR "MPTABLE: checksum error!\n"); - return 0; - } - if (mpc->mpc_spec != 0x01 && mpc->mpc_spec != 0x04) { - printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n", - mpc->mpc_spec); - return 0; - } - if (!mpc->mpc_lapic) { - printk(KERN_ERR "MPTABLE: null local APIC address!\n"); - return 0; - } - memcpy(oem, mpc->mpc_oem, 8); - oem[8] = 0; - printk(KERN_INFO "MPTABLE: OEM ID: %s ", oem); - - memcpy(str, mpc->mpc_productid, 12); - str[12] = 0; - printk("Product ID: %s ", str); - -#ifdef CONFIG_X86_32 - mps_oem_check(mpc, oem, str); -#endif - printk(KERN_INFO "MPTABLE: Product ID: %s ", str); - - printk(KERN_INFO "MPTABLE: APIC at: 0x%X\n", mpc->mpc_lapic); - - /* save the local APIC address, it might be non-default */ - if (!acpi_lapic) - mp_lapic_addr = mpc->mpc_lapic; - - if (early) - return 1; - - /* - * Now process the configuration blocks. - */ -#ifdef CONFIG_X86_NUMAQ - mpc_record = 0; -#endif - while (count < mpc->mpc_length) { - switch (*mpt) { - case MP_PROCESSOR: - { - struct mpc_config_processor *m = - (struct mpc_config_processor *)mpt; - /* ACPI may have already provided this data */ - if (!acpi_lapic) - MP_processor_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - case MP_BUS: - { - struct mpc_config_bus *m = - (struct mpc_config_bus *)mpt; - MP_bus_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - case MP_IOAPIC: - { - struct mpc_config_ioapic *m = - (struct mpc_config_ioapic *)mpt; - MP_ioapic_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - case MP_INTSRC: - { - struct mpc_config_intsrc *m = - (struct mpc_config_intsrc *)mpt; - - MP_intsrc_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - case MP_LINTSRC: - { - struct mpc_config_lintsrc *m = - (struct mpc_config_lintsrc *)mpt; - MP_lintsrc_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - default: - { - count = mpc->mpc_length; - break; - } - } -#ifdef CONFIG_X86_NUMAQ - ++mpc_record; -#endif - } - setup_apic_routing(); - if (!num_processors) - printk(KERN_ERR "MPTABLE: no processors registered!\n"); - return num_processors; -} - -static int __init ELCR_trigger(unsigned int irq) -{ - unsigned int port; - - port = 0x4d0 + (irq >> 3); - return (inb(port) >> (irq & 7)) & 1; -} - -static void __init construct_default_ioirq_mptable(int mpc_default_type) -{ - struct mpc_config_intsrc intsrc; - int i; - int ELCR_fallback = 0; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqflag = 0; /* conforming */ - intsrc.mpc_srcbus = 0; - intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid; - - intsrc.mpc_irqtype = mp_INT; - - /* - * If true, we have an ISA/PCI system with no IRQ entries - * in the MP table. To prevent the PCI interrupts from being set up - * incorrectly, we try to use the ELCR. The sanity check to see if - * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can - * never be level sensitive, so we simply see if the ELCR agrees. - * If it does, we assume it's valid. - */ - if (mpc_default_type == 5) { - printk(KERN_INFO "ISA/PCI bus type with no IRQ information... " - "falling back to ELCR\n"); - - if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || - ELCR_trigger(13)) - printk(KERN_ERR "ELCR contains invalid data... " - "not using ELCR\n"); - else { - printk(KERN_INFO - "Using ELCR to identify PCI interrupts\n"); - ELCR_fallback = 1; - } - } - - for (i = 0; i < 16; i++) { - switch (mpc_default_type) { - case 2: - if (i == 0 || i == 13) - continue; /* IRQ0 & IRQ13 not connected */ - /* fall through */ - default: - if (i == 2) - continue; /* IRQ2 is never connected */ - } - - if (ELCR_fallback) { - /* - * If the ELCR indicates a level-sensitive interrupt, we - * copy that information over to the MP table in the - * irqflag field (level sensitive, active high polarity). - */ - if (ELCR_trigger(i)) - intsrc.mpc_irqflag = 13; - else - intsrc.mpc_irqflag = 0; - } - - intsrc.mpc_srcbusirq = i; - intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */ - MP_intsrc_info(&intsrc); - } - - intsrc.mpc_irqtype = mp_ExtINT; - intsrc.mpc_srcbusirq = 0; - intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */ - MP_intsrc_info(&intsrc); -} - -static inline void __init construct_default_ISA_mptable(int mpc_default_type) -{ - struct mpc_config_processor processor; - struct mpc_config_bus bus; - struct mpc_config_ioapic ioapic; - struct mpc_config_lintsrc lintsrc; - int linttypes[2] = { mp_ExtINT, mp_NMI }; - int i; - - /* - * local APIC has default address - */ - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - - /* - * 2 CPUs, numbered 0 & 1. - */ - processor.mpc_type = MP_PROCESSOR; - /* Either an integrated APIC or a discrete 82489DX. */ - processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; - processor.mpc_cpuflag = CPU_ENABLED; - processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | - (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; - processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; - processor.mpc_reserved[0] = 0; - processor.mpc_reserved[1] = 0; - for (i = 0; i < 2; i++) { - processor.mpc_apicid = i; - MP_processor_info(&processor); - } - - bus.mpc_type = MP_BUS; - bus.mpc_busid = 0; - switch (mpc_default_type) { - default: - printk(KERN_ERR "???\nUnknown standard configuration %d\n", - mpc_default_type); - /* fall through */ - case 1: - case 5: - memcpy(bus.mpc_bustype, "ISA ", 6); - break; - case 2: - case 6: - case 3: - memcpy(bus.mpc_bustype, "EISA ", 6); - break; - case 4: - case 7: - memcpy(bus.mpc_bustype, "MCA ", 6); - } - MP_bus_info(&bus); - if (mpc_default_type > 4) { - bus.mpc_busid = 1; - memcpy(bus.mpc_bustype, "PCI ", 6); - MP_bus_info(&bus); - } - - ioapic.mpc_type = MP_IOAPIC; - ioapic.mpc_apicid = 2; - ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; - ioapic.mpc_flags = MPC_APIC_USABLE; - ioapic.mpc_apicaddr = 0xFEC00000; - MP_ioapic_info(&ioapic); - - /* - * We set up most of the low 16 IO-APIC pins according to MPS rules. - */ - construct_default_ioirq_mptable(mpc_default_type); - - lintsrc.mpc_type = MP_LINTSRC; - lintsrc.mpc_irqflag = 0; /* conforming */ - lintsrc.mpc_srcbusid = 0; - lintsrc.mpc_srcbusirq = 0; - lintsrc.mpc_destapic = MP_APIC_ALL; - for (i = 0; i < 2; i++) { - lintsrc.mpc_irqtype = linttypes[i]; - lintsrc.mpc_destapiclint = i; - MP_lintsrc_info(&lintsrc); - } -} - -static struct intel_mp_floating *mpf_found; - -/* - * Scan the memory blocks for an SMP configuration block. - */ -static void __init __get_smp_config(unsigned early) -{ - struct intel_mp_floating *mpf = mpf_found; - - if (acpi_lapic && early) - return; - /* - * ACPI supports both logical (e.g. Hyper-Threading) and physical - * processors, where MPS only supports physical. - */ - if (acpi_lapic && acpi_ioapic) { - printk(KERN_INFO "Using ACPI (MADT) for SMP configuration " - "information\n"); - return; - } else if (acpi_lapic) - printk(KERN_INFO "Using ACPI for processor (LAPIC) " - "configuration information\n"); - - printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", - mpf->mpf_specification); -#ifdef CONFIG_X86_32 - if (mpf->mpf_feature2 & (1 << 7)) { - printk(KERN_INFO " IMCR and PIC compatibility mode.\n"); - pic_mode = 1; - } else { - printk(KERN_INFO " Virtual Wire compatibility mode.\n"); - pic_mode = 0; - } -#endif - /* - * Now see if we need to read further. - */ - if (mpf->mpf_feature1 != 0) { - if (early) { - /* - * local APIC has default address - */ - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - return; - } - - printk(KERN_INFO "Default MP configuration #%d\n", - mpf->mpf_feature1); - construct_default_ISA_mptable(mpf->mpf_feature1); - - } else if (mpf->mpf_physptr) { - - /* - * Read the physical hardware table. Anything here will - * override the defaults. - */ - if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr), early)) { - smp_found_config = 0; - printk(KERN_ERR - "BIOS bug, MP table errors detected!...\n"); - printk(KERN_ERR "... disabling SMP support. " - "(tell your hw vendor)\n"); - return; - } - - if (early) - return; - /* - * If there are no explicit MP IRQ entries, then we are - * broken. We set up most of the low 16 IO-APIC pins to - * ISA defaults and hope it will work. - */ - if (!mp_irq_entries) { - struct mpc_config_bus bus; - - printk(KERN_ERR "BIOS bug, no explicit IRQ entries, " - "using default mptable. " - "(tell your hw vendor)\n"); - - bus.mpc_type = MP_BUS; - bus.mpc_busid = 0; - memcpy(bus.mpc_bustype, "ISA ", 6); - MP_bus_info(&bus); - - construct_default_ioirq_mptable(0); - } - - } else - BUG(); - - if (!early) - printk(KERN_INFO "Processors: %d\n", num_processors); - /* - * Only use the first configuration found. - */ -} - -void __init early_get_smp_config(void) -{ - __get_smp_config(1); -} - -void __init get_smp_config(void) -{ - __get_smp_config(0); -} - -static int __init smp_scan_config(unsigned long base, unsigned long length, - unsigned reserve) -{ - extern void __bad_mpf_size(void); - unsigned int *bp = phys_to_virt(base); - struct intel_mp_floating *mpf; - - Dprintk("Scan SMP from %p for %ld bytes.\n", bp, length); - if (sizeof(*mpf) != 16) - __bad_mpf_size(); - - while (length > 0) { - mpf = (struct intel_mp_floating *)bp; - if ((*bp == SMP_MAGIC_IDENT) && - (mpf->mpf_length == 1) && - !mpf_checksum((unsigned char *)bp, 16) && - ((mpf->mpf_specification == 1) - || (mpf->mpf_specification == 4))) { - - smp_found_config = 1; - mpf_found = mpf; -#ifdef CONFIG_X86_32 - printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n", - mpf, virt_to_phys(mpf)); - reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE, - BOOTMEM_DEFAULT); - if (mpf->mpf_physptr) { - /* - * We cannot access to MPC table to compute - * table size yet, as only few megabytes from - * the bottom is mapped now. - * PC-9800's MPC table places on the very last - * of physical memory; so that simply reserving - * PAGE_SIZE from mpg->mpf_physptr yields BUG() - * in reserve_bootmem. - */ - unsigned long size = PAGE_SIZE; - unsigned long end = max_low_pfn * PAGE_SIZE; - if (mpf->mpf_physptr + size > end) - size = end - mpf->mpf_physptr; - reserve_bootmem(mpf->mpf_physptr, size, - BOOTMEM_DEFAULT); - } - -#else - if (!reserve) - return 1; - - reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE); - if (mpf->mpf_physptr) - reserve_bootmem_generic(mpf->mpf_physptr, - PAGE_SIZE); -#endif - return 1; - } - bp += 4; - length -= 16; - } - return 0; -} - -static void __init __find_smp_config(unsigned reserve) -{ - unsigned int address; - - /* - * FIXME: Linux assumes you have 640K of base ram.. - * this continues the error... - * - * 1) Scan the bottom 1K for a signature - * 2) Scan the top 1K of base RAM - * 3) Scan the 64K of bios - */ - if (smp_scan_config(0x0, 0x400, reserve) || - smp_scan_config(639 * 0x400, 0x400, reserve) || - smp_scan_config(0xF0000, 0x10000, reserve)) - return; - /* - * If it is an SMP machine we should know now. - * - * there is a real-mode segmented pointer pointing to the - * 4K EBDA area at 0x40E, calculate and scan it here. - * - * NOTE! There are Linux loaders that will corrupt the EBDA - * area, and as such this kind of SMP config may be less - * trustworthy, simply because the SMP table may have been - * stomped on during early boot. These loaders are buggy and - * should be fixed. - * - * MP1.4 SPEC states to only scan first 1K of 4K EBDA. - */ - - address = get_bios_ebda(); - if (address) - smp_scan_config(address, 0x400, reserve); -} - -void __init early_find_smp_config(void) -{ - __find_smp_config(0); -} - -void __init find_smp_config(void) -{ - __find_smp_config(1); -} - -/* -------------------------------------------------------------------------- - ACPI-based MP Configuration - -------------------------------------------------------------------------- */ - -#ifdef CONFIG_ACPI - -#ifdef CONFIG_X86_IO_APIC - -#define MP_ISA_BUS 0 -#define MP_MAX_IOAPIC_PIN 127 - -extern struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; - -static int mp_find_ioapic(int gsi) -{ - int i = 0; - - /* Find the IOAPIC that manages this GSI. */ - for (i = 0; i < nr_ioapics; i++) { - if ((gsi >= mp_ioapic_routing[i].gsi_base) - && (gsi <= mp_ioapic_routing[i].gsi_end)) - return i; - } - - printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); - return -1; -} - -static u8 uniq_ioapic_id(u8 id) -{ -#ifdef CONFIG_X86_32 - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && - !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - return io_apic_get_unique_id(nr_ioapics, id); - else - return id; -#else - int i; - DECLARE_BITMAP(used, 256); - bitmap_zero(used, 256); - for (i = 0; i < nr_ioapics; i++) { - struct mpc_config_ioapic *ia = &mp_ioapics[i]; - __set_bit(ia->mpc_apicid, used); - } - if (!test_bit(id, used)) - return id; - return find_first_zero_bit(used, 256); -#endif -} - -void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) -{ - int idx = 0; - - if (bad_ioapic(address)) - return; - - idx = nr_ioapics; - - mp_ioapics[idx].mpc_type = MP_IOAPIC; - mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; - mp_ioapics[idx].mpc_apicaddr = address; - - set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); -#ifdef CONFIG_X86_32 - mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); -#else - mp_ioapics[idx].mpc_apicver = 0; -#endif - /* - * Build basic GSI lookup table to facilitate gsi->io_apic lookups - * and to prevent reprogramming of IOAPIC pins (PCI GSIs). - */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; - mp_ioapic_routing[idx].gsi_base = gsi_base; - mp_ioapic_routing[idx].gsi_end = gsi_base + - io_apic_get_redir_entries(idx); - - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, address 0x%x, " - "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, - mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, - mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); - - nr_ioapics++; -} - -void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) -{ - struct mpc_config_intsrc intsrc; - int ioapic = -1; - int pin = -1; - - /* - * Convert 'gsi' to 'ioapic.pin'. - */ - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) - return; - pin = gsi - mp_ioapic_routing[ioapic].gsi_base; - - /* - * TBD: This check is for faulty timer entries, where the override - * erroneously sets the trigger to level, resulting in a HUGE - * increase of timer interrupts! - */ - if ((bus_irq == 0) && (trigger == 3)) - trigger = 1; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_irqflag = (trigger << 2) | polarity; - intsrc.mpc_srcbus = MP_ISA_BUS; - intsrc.mpc_srcbusirq = bus_irq; /* IRQ */ - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ - intsrc.mpc_dstirq = pin; /* INTIN# */ - - Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n", - intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, - (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, - intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq); - - mp_irqs[mp_irq_entries] = intsrc; - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!\n"); -} - -int es7000_plat; - -void __init mp_config_acpi_legacy_irqs(void) -{ - struct mpc_config_intsrc intsrc; - int i = 0; - int ioapic = -1; - -#if defined (CONFIG_MCA) || defined (CONFIG_EISA) - /* - * Fabricate the legacy ISA bus (bus #31). - */ - mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; -#endif - set_bit(MP_ISA_BUS, mp_bus_not_pci); - Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); - - /* - * Older generations of ES7000 have no legacy identity mappings - */ - if (es7000_plat == 1) - return; - - /* - * Locate the IOAPIC that manages the ISA IRQs (0-15). - */ - ioapic = mp_find_ioapic(0); - if (ioapic < 0) - return; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqflag = 0; /* Conforming */ - intsrc.mpc_srcbus = MP_ISA_BUS; - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; - - /* - * Use the default configuration for the IRQs 0-15. Unless - * overridden by (MADT) interrupt source override entries. - */ - for (i = 0; i < 16; i++) { - int idx; - - for (idx = 0; idx < mp_irq_entries; idx++) { - struct mpc_config_intsrc *irq = mp_irqs + idx; - - /* Do we already have a mapping for this ISA IRQ? */ - if (irq->mpc_srcbus == MP_ISA_BUS - && irq->mpc_srcbusirq == i) - break; - - /* Do we already have a mapping for this IOAPIC pin */ - if ((irq->mpc_dstapic == intsrc.mpc_dstapic) && - (irq->mpc_dstirq == i)) - break; - } - - if (idx != mp_irq_entries) { - printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); - continue; /* IRQ already used */ - } - - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_srcbusirq = i; /* Identity mapped */ - intsrc.mpc_dstirq = i; - - Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, " - "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, - (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, - intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, - intsrc.mpc_dstirq); - - mp_irqs[mp_irq_entries] = intsrc; - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!\n"); - } -} - -int mp_register_gsi(u32 gsi, int triggering, int polarity) -{ - int ioapic = -1; - int ioapic_pin = 0; - int idx, bit = 0; -#ifdef CONFIG_X86_32 -#define MAX_GSI_NUM 4096 -#define IRQ_COMPRESSION_START 64 - - static int pci_irq = IRQ_COMPRESSION_START; - /* - * Mapping between Global System Interrupts, which - * represent all possible interrupts, and IRQs - * assigned to actual devices. - */ - static int gsi_to_irq[MAX_GSI_NUM]; -#else - - if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) - return gsi; -#endif - - /* Don't set up the ACPI SCI because it's already set up */ - if (acpi_gbl_FADT.sci_interrupt == gsi) - return gsi; - - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) { - printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); - return gsi; - } - - ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base; - -#ifdef CONFIG_X86_32 - if (ioapic_renumber_irq) - gsi = ioapic_renumber_irq(ioapic, gsi); -#endif - - /* - * Avoid pin reprogramming. PRTs typically include entries - * with redundant pin->gsi mappings (but unique PCI devices); - * we only program the IOAPIC on the first. - */ - bit = ioapic_pin % 32; - idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32); - if (idx > 3) { - printk(KERN_ERR "Invalid reference to IOAPIC pin " - "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, - ioapic_pin); - return gsi; - } - if ((1 << bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) { - Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", - mp_ioapic_routing[ioapic].apic_id, ioapic_pin); -#ifdef CONFIG_X86_32 - return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); -#else - return gsi; -#endif - } - - mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1 << bit); -#ifdef CONFIG_X86_32 - /* - * For GSI >= 64, use IRQ compression - */ - if ((gsi >= IRQ_COMPRESSION_START) - && (triggering == ACPI_LEVEL_SENSITIVE)) { - /* - * For PCI devices assign IRQs in order, avoiding gaps - * due to unused I/O APIC pins. - */ - int irq = gsi; - if (gsi < MAX_GSI_NUM) { - /* - * Retain the VIA chipset work-around (gsi > 15), but - * avoid a problem where the 8254 timer (IRQ0) is setup - * via an override (so it's not on pin 0 of the ioapic), - * and at the same time, the pin 0 interrupt is a PCI - * type. The gsi > 15 test could cause these two pins - * to be shared as IRQ0, and they are not shareable. - * So test for this condition, and if necessary, avoid - * the pin collision. - */ - gsi = pci_irq++; - /* - * Don't assign IRQ used by ACPI SCI - */ - if (gsi == acpi_gbl_FADT.sci_interrupt) - gsi = pci_irq++; - gsi_to_irq[irq] = gsi; - } else { - printk(KERN_ERR "GSI %u is too high\n", gsi); - return gsi; - } - } -#endif - io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, - triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, - polarity == ACPI_ACTIVE_HIGH ? 0 : 1); - return gsi; -} - -#endif /* CONFIG_X86_IO_APIC */ -#endif /* CONFIG_ACPI */ |