aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/mips/au1000/common/setup.c6
-rw-r--r--arch/mips/au1000/common/time.c29
-rw-r--r--arch/mips/au1000/pb1200/board_setup.c9
-rw-r--r--arch/mips/kernel/branch.c5
-rw-r--r--arch/mips/kernel/traps.c8
-rw-r--r--arch/mips/math-emu/cp1emu.c19
-rw-r--r--arch/mips/math-emu/dsemul.c12
-rw-r--r--arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c19
8 files changed, 23 insertions, 84 deletions
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index fdf2b85a69c..a95b3777319 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -103,12 +103,6 @@ void __init plat_mem_setup(void)
}
#endif
-#ifdef CONFIG_FB_XPERT98
- if ((argptr = strstr(argptr, "video=")) == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " video=atyfb:1024x768-8@70");
- }
-#endif
#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
/* au1000 does not support vra, au1500 and au1100 do */
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index fa1c62f0551..8fc29982d70 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -203,11 +203,7 @@ wakeup_counter0_set(int ticks)
/* I haven't found anyone that doesn't use a 12 MHz source clock,
* but just in case.....
*/
-#ifdef CONFIG_AU1000_SRC_CLK
-#define AU1000_SRC_CLK CONFIG_AU1000_SRC_CLK
-#else
#define AU1000_SRC_CLK 12000000
-#endif
/*
* We read the real processor speed from the PLL. This is important
@@ -247,33 +243,8 @@ unsigned long cal_r4koff(void)
au_writel (0, SYS_TOYWRITE);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
-#if defined(CONFIG_AU1000_USE32K)
- {
- unsigned long start, end, count;
-
- start = au_readl(SYS_RTCREAD);
- start += 2;
- /* wait for the beginning of a new tick
- */
- while (au_readl(SYS_RTCREAD) < start);
-
- /* Start r4k counter.
- */
- write_c0_count(0);
-
- /* Wait 0.5 seconds.
- */
- end = start + (32768 / trim_divide)/2;
-
- while (end > au_readl(SYS_RTCREAD));
-
- count = read_c0_count();
- cpu_speed = count * 2;
- }
-#else
cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) *
AU1000_SRC_CLK;
-#endif
}
else {
/* The 32KHz oscillator isn't running, so assume there
diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c
index 043302b7fe5..eea2092bde8 100644
--- a/arch/mips/au1000/pb1200/board_setup.c
+++ b/arch/mips/au1000/pb1200/board_setup.c
@@ -131,14 +131,7 @@ void __init board_setup(void)
/* The Pb1200 development board uses external MUX for PSC0 to
support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
*/
-#if defined(CONFIG_AU1XXX_PSC_SPI) && defined(CONFIG_I2C_AU1550)
- #error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\
- Refer to Pb1200/Db1200 documentation.
-#elif defined( CONFIG_AU1XXX_PSC_SPI )
- bcsr->resets |= BCSR_RESETS_PCS0MUX;
- /*Hard Coding Value to enable Temp Sensors [bit 14] Value for SOC Au1200. Pls refer documentation*/
- bcsr->resets =0x900f;
-#elif defined( CONFIG_I2C_AU1550 )
+#ifdef CONFIG_I2C_AU1550
bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
#endif
au_sync();
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index 76fd3f22c76..6b5df8bfab8 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -22,7 +22,8 @@
*/
int __compute_return_epc(struct pt_regs *regs)
{
- unsigned int *addr, bit, fcr31, dspcontrol;
+ unsigned int __user *addr;
+ unsigned int bit, fcr31, dspcontrol;
long epc;
union mips_instruction insn;
@@ -33,7 +34,7 @@ int __compute_return_epc(struct pt_regs *regs)
/*
* Read the instruction
*/
- addr = (unsigned int *) epc;
+ addr = (unsigned int __user *) epc;
if (__get_user(insn.word, addr)) {
force_sig(SIGSEGV, current);
return -EFAULT;
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 5e9fa83c4ef..37c562c4c81 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -131,7 +131,7 @@ static void show_stacktrace(struct task_struct *task, struct pt_regs *regs)
const int field = 2 * sizeof(unsigned long);
long stackdata;
int i;
- unsigned long *sp = (unsigned long *)regs->regs[29];
+ unsigned long __user *sp = (unsigned long __user *)regs->regs[29];
printk("Stack :");
i = 0;
@@ -187,7 +187,7 @@ void dump_stack(void)
EXPORT_SYMBOL(dump_stack);
-void show_code(unsigned int *pc)
+static void show_code(unsigned int __user *pc)
{
long i;
@@ -305,7 +305,7 @@ void show_registers(struct pt_regs *regs)
printk("Process %s (pid: %d, threadinfo=%p, task=%p)\n",
current->comm, current->pid, current_thread_info(), current);
show_stacktrace(current, regs);
- show_code((unsigned int *) regs->cp0_epc);
+ show_code((unsigned int __user *) regs->cp0_epc);
printk("\n");
}
@@ -865,7 +865,7 @@ asmlinkage void do_mcheck(struct pt_regs *regs)
dump_tlb_all();
}
- show_code((unsigned int *) regs->cp0_epc);
+ show_code((unsigned int __user *) regs->cp0_epc);
/*
* Some chips may have other causes of machine check (e.g. SB1
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index d7f05b0abe1..17419e11eca 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -205,7 +205,7 @@ static int isBranchInstr(mips_instruction * i)
static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
{
mips_instruction ir;
- void * emulpc, *contpc;
+ unsigned long emulpc, contpc;
unsigned int cond;
if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
@@ -230,7 +230,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
* Linux MIPS branch emulator operates on context, updating the
* cp0_epc.
*/
- emulpc = (void *) (xcp->cp0_epc + 4); /* Snapshot emulation target */
+ emulpc = xcp->cp0_epc + 4; /* Snapshot emulation target */
if (__compute_return_epc(xcp)) {
#ifdef CP1DBG
@@ -244,12 +244,12 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
return SIGBUS;
}
/* __compute_return_epc() will have updated cp0_epc */
- contpc = (void *) xcp->cp0_epc;
+ contpc = xcp->cp0_epc;
/* In order not to confuse ptrace() et al, tweak context */
- xcp->cp0_epc = (unsigned long) emulpc - 4;
+ xcp->cp0_epc = emulpc - 4;
} else {
- emulpc = (void *) xcp->cp0_epc;
- contpc = (void *) (xcp->cp0_epc + 4);
+ emulpc = xcp->cp0_epc;
+ contpc = xcp->cp0_epc + 4;
}
emul:
@@ -427,8 +427,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
* instruction
*/
xcp->cp0_epc += 4;
- contpc = (void *)
- (xcp->cp0_epc +
+ contpc = (xcp->cp0_epc +
(MIPSInst_SIMM(ir) << 2));
if (get_user(ir,
@@ -462,7 +461,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
* Single step the non-cp1
* instruction in the dslot
*/
- return mips_dsemul(xcp, ir, (unsigned long) contpc);
+ return mips_dsemul(xcp, ir, contpc);
}
else {
/* branch not taken */
@@ -521,7 +520,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
}
/* we did it !! */
- xcp->cp0_epc = (unsigned long) contpc;
+ xcp->cp0_epc = contpc;
xcp->cp0_cause &= ~CAUSEF_BD;
return 0;
diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c
index ea6ba724848..653e325849e 100644
--- a/arch/mips/math-emu/dsemul.c
+++ b/arch/mips/math-emu/dsemul.c
@@ -54,8 +54,7 @@ struct emuframe {
int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
{
extern asmlinkage void handle_dsemulret(void);
- mips_instruction *dsemul_insns;
- struct emuframe *fr;
+ struct emuframe __user *fr;
int err;
if (ir == 0) { /* a nop is easy */
@@ -87,8 +86,8 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
*/
/* Ensure that the two instructions are in the same cache line */
- dsemul_insns = (mips_instruction *) ((regs->regs[29] - sizeof(struct emuframe)) & ~0x7);
- fr = (struct emuframe *) dsemul_insns;
+ fr = (struct emuframe __user *)
+ ((regs->regs[29] - sizeof(struct emuframe)) & ~0x7);
/* Verify that the stack pointer is not competely insane */
if (unlikely(!access_ok(VERIFY_WRITE, fr, sizeof(struct emuframe))))
@@ -113,12 +112,13 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
int do_dsemulret(struct pt_regs *xcp)
{
- struct emuframe *fr;
+ struct emuframe __user *fr;
unsigned long epc;
u32 insn, cookie;
int err = 0;
- fr = (struct emuframe *) (xcp->cp0_epc - sizeof(mips_instruction));
+ fr = (struct emuframe __user *)
+ (xcp->cp0_epc - sizeof(mips_instruction));
/*
* If we can't even access the area, something is very wrong, but we'll
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
index a0c11efeaee..40c7c3eeafa 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
@@ -138,7 +138,6 @@ extern void toshiba_rbtx4927_irq_setup(void);
char *prom_getcmdline(void);
#ifdef CONFIG_PCI
-#define CONFIG_TX4927BUG_WORKAROUND
#undef TX4927_SUPPORT_COMMAND_IO
#undef TX4927_SUPPORT_PCI_66
int tx4927_cpu_clock = 100000000; /* 100MHz */
@@ -669,15 +668,7 @@ void tx4927_pci_setup(void)
/* PCI->GB mappings (MEM 16MB) -not used */
tx4927_pcicptr->p2gm1plbase = 0xffffffff;
-#ifdef CONFIG_TX4927BUG_WORKAROUND
- /*
- * TX4927-PCIC-BUG: P2GM1PUBASE must be 0
- * if P2GM0PUBASE was 0.
- */
- tx4927_pcicptr->p2gm1pubase = 0;
-#else
tx4927_pcicptr->p2gm1pubase = 0xffffffff;
-#endif
tx4927_pcicptr->p2gmgbase[1] = 0;
/* PCI->GB mappings (MEM 1MB) -not used */
@@ -910,16 +901,6 @@ void __init toshiba_rbtx4927_setup(void)
if (tx4927_ccfg_toeon)
tx4927_ccfgptr->ccfg |= TX4927_CCFG_TOE;
- /* SDRAMC fixup */
-#ifdef CONFIG_TX4927BUG_WORKAROUND
- /*
- * TX4927-BUG: INF 01-01-18/ BUG 01-01-22
- * G-bus timeout error detection is incorrect
- */
- if (tx4927_ccfg_toeon)
- tx4927_sdramcptr->tr |= 0x02000000; /* RCD:3tck */
-#endif
-
tx4927_pci_setup();
if (tx4927_using_backplane == 1)
printk("backplane board IS installed\n");