aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/alpha/kernel/process.c4
-rw-r--r--arch/alpha/kernel/sys_dp264.c41
-rw-r--r--arch/arm/boot/compressed/ofw-shark.c2
-rw-r--r--arch/arm/kernel/entry-armv.S2
-rw-r--r--arch/arm/kernel/io.c6
-rw-r--r--arch/arm/kernel/semaphore.c2
-rw-r--r--arch/arm/kernel/traps.c3
-rw-r--r--arch/arm/kernel/vmlinux.lds.S8
-rw-r--r--arch/arm/mach-ixp4xx/ixdp425-setup.c6
-rw-r--r--arch/arm/mach-s3c2410/mach-anubis.c3
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c3
-rw-r--r--arch/arm/mach-s3c2410/mach-h1940.c7
-rw-r--r--arch/arm/mach-s3c2410/mach-n30.c6
-rw-r--r--arch/arm/mach-s3c2410/mach-nexcoder.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-otom.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-rx3715.c5
-rw-r--r--arch/arm/mach-s3c2410/mach-smdk2410.c5
-rw-r--r--arch/arm/mach-s3c2410/mach-smdk2440.c5
-rw-r--r--arch/arm/mach-s3c2410/mach-vr1000.c3
-rw-r--r--arch/arm/mach-sa1100/generic.h3
-rw-r--r--arch/arm/mm/fault.c12
-rw-r--r--arch/arm/mm/proc-arm1020.S2
-rw-r--r--arch/arm/mm/proc-arm1020e.S2
-rw-r--r--arch/arm/mm/proc-arm1022.S2
-rw-r--r--arch/arm/mm/proc-arm1026.S2
-rw-r--r--arch/arm/mm/proc-arm6_7.S2
-rw-r--r--arch/arm/mm/proc-arm720.S2
-rw-r--r--arch/arm/mm/proc-arm920.S2
-rw-r--r--arch/arm/mm/proc-arm922.S2
-rw-r--r--arch/arm/mm/proc-arm925.S2
-rw-r--r--arch/arm/mm/proc-arm926.S2
-rw-r--r--arch/arm/mm/proc-sa110.S2
-rw-r--r--arch/arm/mm/proc-sa1100.S2
-rw-r--r--arch/arm/mm/proc-v6.S2
-rw-r--r--arch/arm/mm/proc-xscale.S2
-rw-r--r--arch/ia64/hp/sim/simscsi.c29
-rw-r--r--arch/ia64/kernel/mca_asm.S96
-rw-r--r--arch/ia64/kernel/mca_drv.c21
-rw-r--r--arch/ppc/kernel/Makefile3
-rw-r--r--arch/ppc/kernel/perfmon.c6
-rw-r--r--arch/ppc/platforms/pmac_setup.c10
-rw-r--r--arch/ppc/syslib/of_device.c6
-rw-r--r--arch/ppc/syslib/ppc85xx_setup.c8
-rw-r--r--arch/ppc64/Makefile2
-rw-r--r--arch/ppc64/kernel/of_device.c7
-rw-r--r--arch/ppc64/kernel/pSeries_iommu.c181
-rw-r--r--arch/ppc64/kernel/pci.c9
-rw-r--r--arch/ppc64/kernel/pmac_setup.c18
-rw-r--r--arch/ppc64/kernel/pmac_time.c4
-rw-r--r--arch/ppc64/kernel/prom_init.c3
-rw-r--r--arch/ppc64/kernel/ptrace.c1
-rw-r--r--arch/ppc64/mm/hash_native.c5
-rw-r--r--arch/ppc64/mm/hugetlbpage.c7
-rw-r--r--arch/sparc64/kernel/entry.S39
-rw-r--r--arch/sparc64/kernel/ptrace.c7
-rw-r--r--arch/sparc64/kernel/una_asm.S2
-rw-r--r--arch/sparc64/kernel/unaligned.c64
-rw-r--r--arch/um/Makefile6
-rw-r--r--arch/um/drivers/chan_kern.c60
-rw-r--r--arch/um/drivers/mconsole_user.c2
-rw-r--r--arch/um/include/common-offsets.h4
-rw-r--r--arch/um/include/user.h4
-rw-r--r--arch/um/kernel/process_kern.c3
-rw-r--r--arch/um/kernel/sigio_user.c2
-rw-r--r--arch/um/kernel/skas/include/uaccess-skas.h6
-rw-r--r--arch/um/kernel/tlb.c12
-rw-r--r--arch/um/kernel/trap_kern.c18
-rw-r--r--arch/um/kernel/tt/include/uaccess-tt.h6
-rw-r--r--arch/um/kernel/tt/process_kern.c3
-rw-r--r--arch/um/kernel/tt/uaccess_user.c11
-rw-r--r--arch/um/kernel/umid.c41
-rw-r--r--arch/um/kernel/user_util.c6
-rw-r--r--arch/um/os-Linux/aio.c1
-rw-r--r--arch/um/os-Linux/elf_aux.c3
-rw-r--r--arch/um/os-Linux/process.c1
-rw-r--r--arch/um/sys-i386/ldt.c1
-rw-r--r--arch/x86_64/Kconfig2
-rw-r--r--arch/xtensa/kernel/pci.c4
-rw-r--r--arch/xtensa/kernel/platform.c2
-rw-r--r--arch/xtensa/kernel/process.c2
-rw-r--r--arch/xtensa/kernel/setup.c2
-rw-r--r--arch/xtensa/kernel/signal.c2
-rw-r--r--arch/xtensa/kernel/time.c2
-rw-r--r--arch/xtensa/mm/init.c2
84 files changed, 589 insertions, 305 deletions
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index fa98dae3cd9..eb20c3afff5 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -127,6 +127,10 @@ common_shutdown_1(void *generic_ptr)
/* If booted from SRM, reset some of the original environment. */
if (alpha_using_srm) {
#ifdef CONFIG_DUMMY_CONSOLE
+ /* If we've gotten here after SysRq-b, leave interrupt
+ context before taking over the console. */
+ if (in_interrupt())
+ irq_exit();
/* This has the effect of resetting the VGA video origin. */
take_over_console(&dummy_con, 0, MAX_NR_CONSOLES-1, 1);
#endif
diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c
index 9e36b07fa94..d5da6b1b28e 100644
--- a/arch/alpha/kernel/sys_dp264.c
+++ b/arch/alpha/kernel/sys_dp264.c
@@ -395,6 +395,22 @@ clipper_init_irq(void)
*/
static int __init
+isa_irq_fixup(struct pci_dev *dev, int irq)
+{
+ u8 irq8;
+
+ if (irq > 0)
+ return irq;
+
+ /* This interrupt is routed via ISA bridge, so we'll
+ just have to trust whatever value the console might
+ have assigned. */
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8);
+
+ return irq8 & 0xf;
+}
+
+static int __init
dp264_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
static char irq_tab[6][5] __initdata = {
@@ -407,25 +423,13 @@ dp264_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{ 16+ 3, 16+ 3, 16+ 2, 16+ 1, 16+ 0} /* IdSel 10 slot 3 */
};
const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5;
-
struct pci_controller *hose = dev->sysdata;
int irq = COMMON_TABLE_LOOKUP;
- if (irq > 0) {
+ if (irq > 0)
irq += 16 * hose->index;
- } else {
- /* ??? The Contaq IDE controller on the ISA bridge uses
- "legacy" interrupts 14 and 15. I don't know if anything
- can wind up at the same slot+pin on hose1, so we'll
- just have to trust whatever value the console might
- have assigned. */
-
- u8 irq8;
- pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8);
- irq = irq8;
- }
- return irq;
+ return isa_irq_fixup(dev, irq);
}
static int __init
@@ -453,7 +457,8 @@ monet_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{ 24, 24, 25, 26, 27} /* IdSel 15 slot 5 PCI2*/
};
const long min_idsel = 3, max_idsel = 15, irqs_per_slot = 5;
- return COMMON_TABLE_LOOKUP;
+
+ return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
}
static u8 __init
@@ -507,7 +512,8 @@ webbrick_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{ 47, 47, 46, 45, 44}, /* IdSel 17 slot 3 */
};
const long min_idsel = 7, max_idsel = 17, irqs_per_slot = 5;
- return COMMON_TABLE_LOOKUP;
+
+ return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
}
static int __init
@@ -524,14 +530,13 @@ clipper_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{ -1, -1, -1, -1, -1} /* IdSel 7 ISA Bridge */
};
const long min_idsel = 1, max_idsel = 7, irqs_per_slot = 5;
-
struct pci_controller *hose = dev->sysdata;
int irq = COMMON_TABLE_LOOKUP;
if (irq > 0)
irq += 16 * hose->index;
- return irq;
+ return isa_irq_fixup(dev, irq);
}
static void __init
diff --git a/arch/arm/boot/compressed/ofw-shark.c b/arch/arm/boot/compressed/ofw-shark.c
index 7f6f5db0d06..465c54b6b12 100644
--- a/arch/arm/boot/compressed/ofw-shark.c
+++ b/arch/arm/boot/compressed/ofw-shark.c
@@ -256,5 +256,5 @@ asmlinkage void ofw_init(ofw_handle_t o, int *nomr, int *pointer)
temp[11]='\0';
mem_len = OF_getproplen(o,phandle, temp);
OF_getprop(o,phandle, temp, buffer, mem_len);
- (unsigned char) pointer[32] = ((unsigned char *) buffer)[mem_len-2];
+ * ((unsigned char *) &pointer[32]) = ((unsigned char *) buffer)[mem_len-2];
}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 7152bfbee58..93b5e8e5292 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -537,7 +537,7 @@ ENTRY(__switch_to)
#ifdef CONFIG_CPU_MPCORE
clrex
#else
- strex r3, r4, [ip] @ Clear exclusive monitor
+ strex r5, r4, [ip] @ Clear exclusive monitor
#endif
#endif
#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
diff --git a/arch/arm/kernel/io.c b/arch/arm/kernel/io.c
index 6c20c1188b6..1f6822dfae7 100644
--- a/arch/arm/kernel/io.c
+++ b/arch/arm/kernel/io.c
@@ -7,7 +7,7 @@
* Copy data from IO memory space to "real" memory space.
* This needs to be optimized.
*/
-void _memcpy_fromio(void *to, void __iomem *from, size_t count)
+void _memcpy_fromio(void *to, const volatile void __iomem *from, size_t count)
{
unsigned char *t = to;
while (count) {
@@ -22,7 +22,7 @@ void _memcpy_fromio(void *to, void __iomem *from, size_t count)
* Copy data from "real" memory space to IO memory space.
* This needs to be optimized.
*/
-void _memcpy_toio(void __iomem *to, const void *from, size_t count)
+void _memcpy_toio(volatile void __iomem *to, const void *from, size_t count)
{
const unsigned char *f = from;
while (count) {
@@ -37,7 +37,7 @@ void _memcpy_toio(void __iomem *to, const void *from, size_t count)
* "memset" on IO memory space.
* This needs to be optimized.
*/
-void _memset_io(void __iomem *dst, int c, size_t count)
+void _memset_io(volatile void __iomem *dst, int c, size_t count)
{
while (count) {
count--;
diff --git a/arch/arm/kernel/semaphore.c b/arch/arm/kernel/semaphore.c
index ac423e3e224..4c31f292305 100644
--- a/arch/arm/kernel/semaphore.c
+++ b/arch/arm/kernel/semaphore.c
@@ -178,7 +178,7 @@ int __down_trylock(struct semaphore * sem)
* registers (r0 to r3 and lr), but not ip, as we use it as a return
* value in some cases..
*/
-asm(" .section .sched.text,\"ax\" \n\
+asm(" .section .sched.text,\"ax\",%progbits \n\
.align 5 \n\
.globl __down_failed \n\
__down_failed: \n\
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 4554c961251..e7d22dbcb69 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -624,6 +624,9 @@ void __attribute__((noreturn)) __bug(const char *file, int line, void *data)
printk(" - extra data = %p", data);
printk("\n");
*(int *)0 = 0;
+
+ /* Avoid "noreturn function does return" */
+ for (;;);
}
EXPORT_SYMBOL(__bug);
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index ad2d66c93a5..08e58ecd44b 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -23,20 +23,20 @@ SECTIONS
*(.init.text)
_einittext = .;
__proc_info_begin = .;
- *(.proc.info)
+ *(.proc.info.init)
__proc_info_end = .;
__arch_info_begin = .;
- *(.arch.info)
+ *(.arch.info.init)
__arch_info_end = .;
__tagtable_begin = .;
- *(.taglist)
+ *(.taglist.init)
__tagtable_end = .;
. = ALIGN(16);
__setup_start = .;
*(.init.setup)
__setup_end = .;
__early_begin = .;
- *(__early_param)
+ *(.early_param.init)
__early_end = .;
__initcall_start = .;
*(.initcall1.init)
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index ae1fa099d5f..39b06ed8064 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -123,6 +123,7 @@ static void __init ixdp425_init(void)
platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices));
}
+#ifdef CONFIG_ARCH_IXDP465
MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
.phys_ram = PHYS_OFFSET,
@@ -134,7 +135,9 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
.boot_params = 0x0100,
.init_machine = ixdp425_init,
MACHINE_END
+#endif
+#ifdef CONFIG_MACH_IXDP465
MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
.phys_ram = PHYS_OFFSET,
@@ -146,7 +149,9 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
.boot_params = 0x0100,
.init_machine = ixdp425_init,
MACHINE_END
+#endif
+#ifdef CONFIG_ARCH_PRPMC1100
MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
.phys_ram = PHYS_OFFSET,
@@ -158,6 +163,7 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
.boot_params = 0x0100,
.init_machine = ixdp425_init,
MACHINE_END
+#endif
/*
* Avila is functionally equivalent to IXDP425 except that it adds
diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c
index f87aa0b669a..7c05f27fe1d 100644
--- a/arch/arm/mach-s3c2410/mach-anubis.c
+++ b/arch/arm/mach-s3c2410/mach-anubis.c
@@ -12,6 +12,7 @@
*
* Modifications:
* 02-May-2005 BJD Copied from mach-bast.c
+ * 20-Sep-2005 BJD Added static to non-exported items
*/
#include <linux/kernel.h>
@@ -232,7 +233,7 @@ static struct s3c24xx_board anubis_board __initdata = {
.clocks_count = ARRAY_SIZE(anubis_clocks)
};
-void __init anubis_map_io(void)
+static void __init anubis_map_io(void)
{
/* initialise the clocks */
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 1a3367da640..ed1f07d7252 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -31,6 +31,7 @@
* 17-Jul-2005 BJD Changed to platform device for SuperIO 16550s
* 25-Jul-2005 BJD Removed ASIX static mappings
* 27-Jul-2005 BJD Ensure maximum frequency of i2c bus
+ * 20-Sep-2005 BJD Added static to non-exported items
*/
#include <linux/kernel.h>
@@ -428,7 +429,7 @@ static struct s3c24xx_board bast_board __initdata = {
.clocks_count = ARRAY_SIZE(bast_clocks)
};
-void __init bast_map_io(void)
+static void __init bast_map_io(void)
{
/* initialise the clocks */
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 6ff1889fbd2..fb3cb01266e 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -24,6 +24,7 @@
* 10-Jan-2005 BJD Removed include of s3c2410.h
* 14-Jan-2005 BJD Added clock init
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
+ * 20-Sep-2005 BJD Added static to non-exported items
*/
#include <linux/kernel.h>
@@ -147,7 +148,7 @@ static struct s3c24xx_board h1940_board __initdata = {
.devices_count = ARRAY_SIZE(h1940_devices)
};
-void __init h1940_map_io(void)
+static void __init h1940_map_io(void)
{
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
s3c24xx_init_clocks(0);
@@ -155,13 +156,13 @@ void __init h1940_map_io(void)
s3c24xx_set_board(&h1940_board);
}
-void __init h1940_init_irq(void)
+static void __init h1940_init_irq(void)
{
s3c24xx_init_irq();
}
-void __init h1940_init(void)
+static void __init h1940_init(void)
{
set_s3c2410fb_info(&h1940_lcdcfg);
}
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 66bf5bb2b3d..5c0f2b091f9 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -97,7 +97,7 @@ static struct s3c24xx_board n30_board __initdata = {
.devices_count = ARRAY_SIZE(n30_devices)
};
-void __init n30_map_io(void)
+static void __init n30_map_io(void)
{
s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
s3c24xx_init_clocks(0);
@@ -105,14 +105,14 @@ void __init n30_map_io(void)
s3c24xx_set_board(&n30_board);
}
-void __init n30_init_irq(void)
+static void __init n30_init_irq(void)
{
s3c24xx_init_irq();
}
/* GPB3 is the line that controls the pull-up for the USB D+ line */
-void __init n30_init(void)
+static void __init n30_init(void)
{
s3c_device_i2c.dev.platform_data = &n30_i2ccfg;
diff --git a/arch/arm/mach-s3c2410/mach-nexcoder.c b/arch/arm/mach-s3c2410/mach-nexcoder.c
index d24c242414c..c22f8216032 100644
--- a/arch/arm/mach-s3c2410/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2410/mach-nexcoder.c
@@ -136,7 +136,7 @@ static void __init nexcoder_sensorboard_init(void)
s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN
}
-void __init nexcoder_map_io(void)
+static void __init nexcoder_map_io(void)
{
s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
s3c24xx_init_clocks(0);
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index d901ed492ff..ad1459e402e 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -105,7 +105,7 @@ static struct s3c24xx_board otom11_board __initdata = {
};
-void __init otom11_map_io(void)
+static void __init otom11_map_io(void)
{
s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
s3c24xx_init_clocks(0);
diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c
index a73d61c1de4..22d9e070fd6 100644
--- a/arch/arm/mach-s3c2410/mach-rx3715.c
+++ b/arch/arm/mach-s3c2410/mach-rx3715.c
@@ -16,6 +16,7 @@
* 14-Jan-2005 BJD Added new clock init
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 14-Mar-2005 BJD Fixed __iomem warnings
+ * 20-Sep-2005 BJD Added static to non-exported items
*/
#include <linux/kernel.h>
@@ -108,7 +109,7 @@ static struct s3c24xx_board rx3715_board __initdata = {
.devices_count = ARRAY_SIZE(rx3715_devices)
};
-void __init rx3715_map_io(void)
+static void __init rx3715_map_io(void)
{
s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
s3c24xx_init_clocks(16934000);
@@ -116,7 +117,7 @@ void __init rx3715_map_io(void)
s3c24xx_set_board(&rx3715_board);
}
-void __init rx3715_init_irq(void)
+static void __init rx3715_init_irq(void)
{
s3c24xx_init_irq();
}
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 67e903a700d..2eda55a6b67 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -28,6 +28,7 @@
* Ben Dooks <ben@simtec.co.uk>
*
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
+ * 20-Sep-2005 BJD Added static to non-exported items
*
***********************************************************************/
@@ -97,7 +98,7 @@ static struct s3c24xx_board smdk2410_board __initdata = {
.devices_count = ARRAY_SIZE(smdk2410_devices)
};
-void __init smdk2410_map_io(void)
+static void __init smdk2410_map_io(void)
{
s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
s3c24xx_init_clocks(0);
@@ -105,7 +106,7 @@ void __init smdk2410_map_io(void)
s3c24xx_set_board(&smdk2410_board);
}
-void __init smdk2410_init_irq(void)
+static void __init smdk2410_init_irq(void)
{
s3c24xx_init_irq();
}
diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c
index 357522106f6..722ef46b630 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2440.c
@@ -18,6 +18,7 @@
* 22-Feb-2005 BJD Updated for 2.6.11-rc5 relesa
* 10-Mar-2005 LCVR Replaced S3C2410_VA by S3C24XX_VA
* 14-Mar-2005 BJD void __iomem fixes
+ * 20-Sep-2005 BJD Added static to non-exported items
*/
#include <linux/kernel.h>
@@ -98,7 +99,7 @@ static struct s3c24xx_board smdk2440_board __initdata = {
.devices_count = ARRAY_SIZE(smdk2440_devices)
};
-void __init smdk2440_map_io(void)
+static void __init smdk2440_map_io(void)
{
s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
s3c24xx_init_clocks(16934400);
@@ -106,7 +107,7 @@ void __init smdk2440_map_io(void)
s3c24xx_set_board(&smdk2440_board);
}
-void __init smdk2440_machine_init(void)
+static void __init smdk2440_machine_init(void)
{
/* Configure the LEDs (even if we have no LED support)*/
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 8f9ab2893df..663a7f98fc0 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -28,6 +28,7 @@
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 14-Mar-2006 BJD void __iomem fixes
* 22-Jun-2006 BJD Added DM9000 platform information
+ * 20-Sep-2005 BJD Added static to non-exported items
*/
#include <linux/kernel.h>
@@ -347,7 +348,7 @@ static void vr1000_power_off(void)
s3c2410_gpio_setpin(S3C2410_GPB9, 1);
}
-void __init vr1000_map_io(void)
+static void __init vr1000_map_io(void)
{
/* initialise clock sources */
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 279e3afa3c3..f085d68e568 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -39,3 +39,6 @@ extern void sa11x0_set_ssp_data(struct sa11x0_ssp_plat_ops *ops);
struct irda_platform_data;
void sa11x0_set_irda_data(struct irda_platform_data *irda);
+
+struct mcp_plat_data;
+void sa11x0_set_mcp_data(struct mcp_plat_data *data);
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 0b6c4db44e0..4a884baf3b9 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -233,7 +233,17 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
if (in_interrupt() || !mm)
goto no_context;
- down_read(&mm->mmap_sem);
+ /*
+ * As per x86, we may deadlock here. However, since the kernel only
+ * validly references user space from well defined areas of the code,
+ * we can bug out early if this is from code which shouldn't.
+ */
+ if (!down_read_trylock(&mm->mmap_sem)) {
+ if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc))
+ goto no_context;
+ down_read(&mm->mmap_sem);
+ }
+
fault = __do_page_fault(mm, addr, fsr, tsk);
up_read(&mm->mmap_sem);
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 1d739d282a4..82ec954e45b 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -509,7 +509,7 @@ cpu_arm1020_name:
.align
- .section ".proc.info", #alloc, #execinstr
+ .section ".proc.info.init", #alloc, #execinstr
.type __arm1020_proc_info,#object
__arm1020_proc_info:
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 9b725665b5c..7375fe930f7 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -491,7 +491,7 @@ cpu_arm1020e_name:
.align
- .section ".proc.info", #alloc, #execinstr
+ .section ".proc.info.init", #alloc, #execinstr
.type __arm1020e_proc_info,#object
__arm1020e_proc_info:
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 37b70fa21c7..6ca639094d6 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -473,7 +473,7 @@ cpu_arm1022_name:
.align
- .section ".proc.info", #alloc, #execinstr
+ .section ".proc.info.init", #alloc, #execinstr
.type __arm1022_proc_info,#object
__arm1022_proc_info:
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 931b690d1be..10317e4f55d 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -469,7 +469,7 @@ cpu_arm1026_name:
.align
- .section ".proc.info", #alloc, #execinstr
+ .section ".proc.info.init", #alloc, #execinstr
.type __arm1026_proc_info,#object
__arm1026_proc_info:
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index d0f1bbb48f6..8e7e1e70ab0 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -332,7 +332,7 @@ cpu_arm710_name:
.align
- .section ".proc.info", #alloc, #execinstr
+ .section ".proc.info.init", #alloc, #execinstr
.type __arm6_proc_info, #object
__arm6_proc_info:
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index c69c9de3239..a13e0184d34 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -222,7 +222,7 @@ cpu_arm720_name:
* See linux/include/asm-arm/procinfo.h for a definition of this structure.
*/
- .section ".proc.info", #alloc, #execinstr
+ .section ".proc.info.init", #alloc, #execinstr
.type __arm710_proc_info, #object
__arm710_proc_info:
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 0f490a0fcb7..d1651389999 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -452,7 +452,7 @@ cpu_arm920_name:
.align
- .section ".proc.info", #alloc, #execinstr
+ .section ".proc.info.init", #alloc, #execinstr
.type __arm920_proc_info,#object
__arm920_proc_info:
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 62bc34a139e..23b8ed97f4e 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -456,7 +456,7 @@ cpu_arm922_name:
.align
- .section ".proc.info", #alloc, #execinstr
+ .section ".proc.info.init", #alloc, #execinstr
.type __arm922_proc_info,#object
__arm922_proc_info:
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index ee49aa2ca78..ee95c52db51 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -521,7 +521,7 @@ cpu_arm925_name:
.align
- .section ".proc.info", #alloc, #execinstr
+ .section ".proc.info.init", #alloc, #execinstr
.type __arm925_proc_info,#object
__arm925_proc_info:
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index bb95cc9fed0..7d042dc20c4 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -471,7 +471,7 @@ cpu_arm926_name:
.align
- .section ".proc.info", #alloc, #execinstr
+ .section ".proc.info.init", #alloc, #execinstr
.type __arm926_proc_info,#object
__arm926_proc_info:
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 34f7e7d3f41..bd330c4075a 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -249,7 +249,7 @@ cpu_sa110_name:
.align
- .section ".proc.info", #alloc, #execinstr
+ .section ".proc.info.init", #alloc, #execinstr
.type __sa110_proc_info,#object
__sa110_proc_info:
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index ca14f80d5ab..91b89124c0d 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -280,7 +280,7 @@ cpu_sa1110_name:
.align
- .section ".proc.info", #alloc, #execinstr
+ .section ".proc.info.init", #alloc, #execinstr
.type __sa1100_proc_info,#object
__sa1100_proc_info:
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index eb34823c9db..caf3b19b167 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -240,7 +240,7 @@ cpu_elf_name:
.size cpu_elf_name, . - cpu_elf_name
.align
- .section ".proc.info", #alloc, #execinstr
+ .section ".proc.info.init", #alloc, #execinstr
/*
* Match any ARMv6 processor core.
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index b88de270014..861b3594728 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -578,7 +578,7 @@ cpu_pxa270_name:
.align
- .section ".proc.info", #alloc, #execinstr
+ .section ".proc.info.init", #alloc, #execinstr
.type __80200_proc_info,#object
__80200_proc_info:
diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c
index 56405dbfd73..a18983a3c93 100644
--- a/arch/ia64/hp/sim/simscsi.c
+++ b/arch/ia64/hp/sim/simscsi.c
@@ -233,6 +233,23 @@ simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
simscsi_readwrite(sc, mode, offset, ((sc->cmnd[7] << 8) | sc->cmnd[8])*512);
}
+static void simscsi_fillresult(struct scsi_cmnd *sc, char *buf, unsigned len)
+{
+
+ int scatterlen = sc->use_sg;
+ struct scatterlist *slp;
+
+ if (scatterlen == 0)
+ memcpy(sc->request_buffer, buf, len);
+ else for (slp = (struct scatterlist *)sc->buffer; scatterlen-- > 0 && len > 0; slp++) {
+ unsigned thislen = min(len, slp->length);
+
+ memcpy(page_address(slp->page) + slp->offset, buf, thislen);
+ slp++;
+ len -= thislen;
+ }
+}
+
static int
simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
{
@@ -240,6 +257,7 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
char fname[MAX_ROOT_LEN+16];
size_t disk_size;
char *buf;
+ char localbuf[36];
#if DEBUG_SIMSCSI
register long sp asm ("sp");
@@ -263,7 +281,7 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
/* disk doesn't exist... */
break;
}
- buf = sc->request_buffer;
+ buf = localbuf;
buf[0] = 0; /* magnetic disk */
buf[1] = 0; /* not a removable medium */
buf[2] = 2; /* SCSI-2 compliant device */
@@ -273,6 +291,7 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
buf[6] = 0; /* reserved */
buf[7] = 0; /* various flags */
memcpy(buf + 8, "HP SIMULATED DISK 0.00", 28);
+ simscsi_fillresult(sc, buf, 36);
sc->result = GOOD;
break;
@@ -304,16 +323,13 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
simscsi_readwrite10(sc, SSC_WRITE);
break;
-
case READ_CAPACITY:
if (desc[target_id] < 0 || sc->request_bufflen < 8) {
break;
}
- buf = sc->request_buffer;
-
+ buf = localbuf;
disk_size = simscsi_get_disk_size(desc[target_id]);
- /* pretend to be a 1GB disk (partition table contains real stuff): */
buf[0] = (disk_size >> 24) & 0xff;
buf[1] = (disk_size >> 16) & 0xff;
buf[2] = (disk_size >> 8) & 0xff;
@@ -323,13 +339,14 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
buf[5] = 0;
buf[6] = 2;
buf[7] = 0;
+ simscsi_fillresult(sc, buf, 8);
sc->result = GOOD;
break;
case MODE_SENSE:
case MODE_SENSE_10:
/* sd.c uses this to determine whether disk does write-caching. */
- memset(sc->request_buffer, 0, 128);
+ simscsi_fillresult(sc, (char *)empty_zero_page, sc->request_bufflen);
sc->result = GOOD;
break;
diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S
index 499a065f4e6..db32fc1d393 100644
--- a/arch/ia64/kernel/mca_asm.S
+++ b/arch/ia64/kernel/mca_asm.S
@@ -489,24 +489,27 @@ ia64_state_save:
;;
st8 [temp1]=r17,16 // pal_min_state
st8 [temp2]=r6,16 // prev_IA64_KR_CURRENT
+ mov r6=IA64_KR(CURRENT_STACK)
+ ;;
+ st8 [temp1]=r6,16 // prev_IA64_KR_CURRENT_STACK
+ st8 [temp2]=r0,16 // prev_task, starts off as NULL
mov r6=cr.ifa
;;
- st8 [temp1]=r0,16 // prev_task, starts off as NULL
- st8 [temp2]=r12,16 // cr.isr
+ st8 [temp1]=r12,16 // cr.isr
+ st8 [temp2]=r6,16 // cr.ifa
mov r12=cr.itir
;;
- st8 [temp1]=r6,16 // cr.ifa
- st8 [temp2]=r12,16 // cr.itir
+ st8 [temp1]=r12,16 // cr.itir
+ st8 [temp2]=r11,16 // cr.iipa
mov r12=cr.iim
;;
- st8 [temp1]=r11,16 // cr.iipa
- st8 [temp2]=r12,16 // cr.iim
- mov r6=cr.iha
+ st8 [temp1]=r12,16 // cr.iim
(p1) mov r12=IA64_MCA_COLD_BOOT
(p2) mov r12=IA64_INIT_WARM_BOOT
+ mov r6=cr.iha
;;
- st8 [temp1]=r6,16 // cr.iha
- st8 [temp2]=r12 // os_status, default is cold boot
+ st8 [temp2]=r6,16 // cr.iha
+ st8 [temp1]=r12 // os_status, default is cold boot
mov r6=IA64_MCA_SAME_CONTEXT
;;
st8 [temp1]=r6 // context, default is same context
@@ -823,9 +826,12 @@ ia64_state_restore:
ld8 r12=[temp1],16 // sal_ra
ld8 r9=[temp2],16 // sal_gp
;;
- ld8 r22=[temp1],24 // pal_min_state, virtual. skip prev_task
+ ld8 r22=[temp1],16 // pal_min_state, virtual
ld8 r21=[temp2],16 // prev_IA64_KR_CURRENT
;;
+ ld8 r16=[temp1],16 // prev_IA64_KR_CURRENT_STACK
+ ld8 r20=[temp2],16 // prev_task
+ ;;
ld8 temp3=[temp1],16 // cr.isr
ld8 temp4=[temp2],16 // cr.ifa
;;
@@ -846,6 +852,45 @@ ia64_state_restore:
ld8 r8=[temp1] // os_status
ld8 r10=[temp2] // context
+ /* Wire IA64_TR_CURRENT_STACK to the stack that we are resuming to. To
+ * avoid any dependencies on the algorithm in ia64_switch_to(), just
+ * purge any existing CURRENT_STACK mapping and insert the new one.
+ *
+ * r16 contains prev_IA64_KR_CURRENT_STACK, r21 contains
+ * prev_IA64_KR_CURRENT, these values may have been changed by the C
+ * code. Do not use r8, r9, r10, r22, they contain values ready for
+ * the return to SAL.
+ */
+
+ mov r15=IA64_KR(CURRENT_STACK) // physical granule mapped by IA64_TR_CURRENT_STACK
+ ;;
+ shl r15=r15,IA64_GRANULE_SHIFT
+ ;;
+ dep r15=-1,r15,61,3 // virtual granule
+ mov r18=IA64_GRANULE_SHIFT<<2 // for cr.itir.ps
+ ;;
+ ptr.d r15,r18
+ ;;
+ srlz.d
+
+ extr.u r19=r21,61,3 // r21 = prev_IA64_KR_CURRENT
+ shl r20=r16,IA64_GRANULE_SHIFT // r16 = prev_IA64_KR_CURRENT_STACK
+ movl r21=PAGE_KERNEL // page properties
+ ;;
+ mov IA64_KR(CURRENT_STACK)=r16
+ cmp.ne p6,p0=RGN_KERNEL,r19 // new stack is in the kernel region?
+ or r21=r20,r21 // construct PA | page properties
+(p6) br.spnt 1f // the dreaded cpu 0 idle task in region 5:(
+ ;;
+ mov cr.itir=r18
+ mov cr.ifa=r21
+ mov r20=IA64_TR_CURRENT_STACK
+ ;;
+ itr.d dtr[r20]=r21
+ ;;
+ srlz.d
+1:
+
br.sptk b0
//EndStub//////////////////////////////////////////////////////////////////////
@@ -982,6 +1027,7 @@ ia64_set_kernel_registers:
add temp4=temp4, temp1 // &struct ia64_sal_os_state.os_gp
add r12=temp1, temp3 // kernel stack pointer on MCA/INIT stack
add r13=temp1, r3 // set current to start of MCA/INIT stack
+ add r20=temp1, r3 // physical start of MCA/INIT stack
;;
ld8 r1=[temp4] // OS GP from SAL OS state
;;
@@ -991,7 +1037,35 @@ ia64_set_kernel_registers:
;;
mov IA64_KR(CURRENT)=r13
- // FIXME: do I need to wire IA64_KR_CURRENT_STACK and IA64_TR_CURRENT_STACK?
+ /* Wire IA64_TR_CURRENT_STACK to the MCA/INIT handler stack. To avoid
+ * any dependencies on the algorithm in ia64_switch_to(), just purge
+ * any existing CURRENT_STACK mapping and insert the new one.
+ */
+
+ mov r16=IA64_KR(CURRENT_STACK) // physical granule mapped by IA64_TR_CURRENT_STACK
+ ;;
+ shl r16=r16,IA64_GRANULE_SHIFT
+ ;;
+ dep r16=-1,r16,61,3 // virtual granule
+ mov r18=IA64_GRANULE_SHIFT<<2 // for cr.itir.ps
+ ;;
+ ptr.d r16,r18
+ ;;
+ srlz.d
+
+ shr.u r16=r20,IA64_GRANULE_SHIFT // r20 = physical start of MCA/INIT stack
+ movl r21=PAGE_KERNEL // page properties
+ ;;
+ mov IA64_KR(CURRENT_STACK)=r16
+ or r21=r20,r21 // construct PA | page properties
+ ;;
+ mov cr.itir=r18
+ mov cr.ifa=r13
+ mov r20=IA64_TR_CURRENT_STACK
+ ;;
+ itr.d dtr[r20]=r21
+ ;;
+ srlz.d
br.sptk b0
diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c
index 80f83d6cdbf..f081c60ab20 100644
--- a/arch/ia64/kernel/mca_drv.c
+++ b/arch/ia64/kernel/mca_drv.c
@@ -56,8 +56,9 @@ static struct page *page_isolate[MAX_PAGE_ISOLATE];
static int num_page_isolate = 0;
typedef enum {
- ISOLATE_NG = 0,
- ISOLATE_OK = 1
+ ISOLATE_NG,
+ ISOLATE_OK,
+ ISOLATE_NONE
} isolate_status_t;
/*
@@ -74,7 +75,7 @@ static struct {
* @paddr: poisoned memory location
*
* Return value:
- * ISOLATE_OK / ISOLATE_NG
+ * one of isolate_status_t, ISOLATE_OK/NG/NONE.
*/
static isolate_status_t
@@ -85,7 +86,10 @@ mca_page_isolate(unsigned long paddr)
/* whether physical address is valid or not */
if (!ia64_phys_addr_valid(paddr))
- return ISOLATE_NG;
+ return ISOLATE_NONE;
+
+ if (!pfn_valid(paddr))
+ return ISOLATE_NONE;
/* convert physical address to physical page number */
p = pfn_to_page(paddr>>PAGE_SHIFT);
@@ -122,10 +126,15 @@ mca_handler_bh(unsigned long paddr)
current->pid, current->comm);
spin_lock(&mca_bh_lock);
- if (mca_page_isolate(paddr) == ISOLATE_OK) {
+ switch (mca_page_isolate(paddr)) {
+ case ISOLATE_OK:
printk(KERN_DEBUG "Page isolation: ( %lx ) success.\n", paddr);
- } else {
+ break;
+ case ISOLATE_NG:
printk(KERN_DEBUG "Page isolation: ( %lx ) failure.\n", paddr);
+ break;
+ default:
+ break;
}
spin_unlock(&mca_bh_lock);
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index abf10dcb787..ce166e3de53 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -15,9 +15,8 @@ extra-y += vmlinux.lds
obj-y := entry.o traps.o irq.o idle.o time.o misc.o \
process.o signal.o ptrace.o align.o \
semaphore.o syscalls.o setup.o \
- cputable.o ppc_htab.o
+ cputable.o ppc_htab.o perfmon.o
obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
-obj-$(CONFIG_E500) += perfmon.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
obj-$(CONFIG_POWER4) += cpu_setup_power4.o
obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o
diff --git a/arch/ppc/kernel/perfmon.c b/arch/ppc/kernel/perfmon.c
index 91e2786ea09..f9b27d939f7 100644
--- a/arch/ppc/kernel/perfmon.c
+++ b/arch/ppc/kernel/perfmon.c
@@ -45,7 +45,7 @@ static void dummy_perf(struct pt_regs *regs)
mtpmr(PMRN_PMGC0, pmgc0);
}
-#else
+#elif CONFIG_6xx
/* Ensure exceptions are disabled */
static void dummy_perf(struct pt_regs *regs)
@@ -55,6 +55,10 @@ static void dummy_perf(struct pt_regs *regs)
mmcr0 &= ~MMCR0_PMXE;
mtspr(SPRN_MMCR0, mmcr0);
}
+#else
+static void dummy_perf(struct pt_regs *regs)
+{
+}
#endif
void (*perf_irq)(struct pt_regs *) = dummy_perf;
diff --git a/arch/ppc/platforms/pmac_setup.c b/arch/ppc/platforms/pmac_setup.c
index 12cbc85555d..1ad779ecc8f 100644
--- a/arch/ppc/platforms/pmac_setup.c
+++ b/arch/ppc/platforms/pmac_setup.c
@@ -719,7 +719,8 @@ pmac_declare_of_platform_devices(void)
if (np) {
for (np = np->child; np != NULL; np = np->sibling)
if (strncmp(np->name, "i2c", 3) == 0) {
- of_platform_device_create(np, "uni-n-i2c");
+ of_platform_device_create(np, "uni-n-i2c",
+ NULL);
break;
}
}
@@ -727,17 +728,18 @@ pmac_declare_of_platform_devices(void)
if (np) {
for (np = np->child; np != NULL; np = np->sibling)
if (strncmp(np->name, "i2c", 3) == 0) {
- of_platform_device_create(np, "u3-i2c");
+ of_platform_device_create(np, "u3-i2c",
+ NULL);
break;
}
}
np = find_devices("valkyrie");
if (np)
- of_platform_device_create(np, "valkyrie");
+ of_platform_device_create(np, "valkyrie", NULL);
np = find_devices("platinum");
if (np)
- of_platform_device_create(np, "platinum");
+ of_platform_device_create(np, "platinum", NULL);
return 0;
}
diff --git a/arch/ppc/syslib/of_device.c b/arch/ppc/syslib/of_device.c
index da8a0f2128d..93c7231ea70 100644
--- a/arch/ppc/syslib/of_device.c
+++ b/arch/ppc/syslib/of_device.c
@@ -234,7 +234,9 @@ void of_device_unregister(struct of_device *ofdev)
device_unregister(&ofdev->dev);
}
-struct of_device* of_platform_device_create(struct device_node *np, const char *bus_id)
+struct of_device* of_platform_device_create(struct device_node *np,
+ const char *bus_id,
+ struct device *parent)
{
struct of_device *dev;
u32 *reg;
@@ -247,7 +249,7 @@ struct of_device* of_platform_device_create(struct device_node *np, const char *
dev->node = of_node_get(np);
dev->dma_mask = 0xffffffffUL;
dev->dev.dma_mask = &dev->dma_mask;
- dev->dev.parent = NULL;
+ dev->dev.parent = parent;
dev->dev.bus = &of_platform_bus_type;
dev->dev.release = of_release_dev;
diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c
index b7242f1bd93..832b8bf99ae 100644
--- a/arch/ppc/syslib/ppc85xx_setup.c
+++ b/arch/ppc/syslib/ppc85xx_setup.c
@@ -184,8 +184,8 @@ mpc85xx_setup_pci1(struct pci_controller *hose)
pci->powar1 = 0x80044000 |
(__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1);
- /* Setup outboud IO windows @ MPC85XX_PCI1_IO_BASE */
- pci->potar2 = 0x00000000;
+ /* Setup outbound IO windows @ MPC85XX_PCI1_IO_BASE */
+ pci->potar2 = (MPC85XX_PCI1_LOWER_IO >> 12) & 0x000fffff;
pci->potear2 = 0x00000000;
pci->powbar2 = (MPC85XX_PCI1_IO_BASE >> 12) & 0x000fffff;
/* Enable, IO R/W */
@@ -235,8 +235,8 @@ mpc85xx_setup_pci2(struct pci_controller *hose)
pci->powar1 = 0x80044000 |
(__ilog2(MPC85XX_PCI2_UPPER_MEM - MPC85XX_PCI2_LOWER_MEM + 1) - 1);
- /* Setup outboud IO windows @ MPC85XX_PCI2_IO_BASE */
- pci->potar2 = 0x00000000;
+ /* Setup outbound IO windows @ MPC85XX_PCI2_IO_BASE */
+ pci->potar2 = (MPC85XX_PCI2_LOWER_IO >> 12) & 0x000fffff;;
pci->potear2 = 0x00000000;
pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff;
/* Enable, IO R/W */
diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile
index a8877881bb4..40675b3f924 100644
--- a/arch/ppc64/Makefile
+++ b/arch/ppc64/Makefile
@@ -107,7 +107,7 @@ install: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
defaultimage-$(CONFIG_PPC_PSERIES) := zImage
-defaultimage-$(CONFIG_PPC_PMAC) := vmlinux
+defaultimage-$(CONFIG_PPC_PMAC) := zImage.vmode
defaultimage-$(CONFIG_PPC_MAPLE) := zImage
defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux
KBUILD_IMAGE := $(defaultimage-y)
diff --git a/arch/ppc64/kernel/of_device.c b/arch/ppc64/kernel/of_device.c
index da580812ddf..9f200f0f2ad 100644
--- a/arch/ppc64/kernel/of_device.c
+++ b/arch/ppc64/kernel/of_device.c
@@ -233,7 +233,9 @@ void of_device_unregister(struct of_device *ofdev)
device_unregister(&ofdev->dev);
}
-struct of_device* of_platform_device_create(struct device_node *np, const char *bus_id)
+struct of_device* of_platform_device_create(struct device_node *np,
+ const char *bus_id,
+ struct device *parent)
{
struct of_device *dev;
@@ -245,7 +247,7 @@ struct of_device* of_platform_device_create(struct device_node *np, const char *
dev->node = np;
dev->dma_mask = 0xffffffffUL;
dev->dev.dma_mask = &dev->dma_mask;
- dev->dev.parent = NULL;
+ dev->dev.parent = parent;
dev->dev.bus = &of_platform_bus_type;
dev->dev.release = of_release_dev;
@@ -259,6 +261,7 @@ struct of_device* of_platform_device_create(struct device_node *np, const char *
return dev;
}
+
EXPORT_SYMBOL(of_match_device);
EXPORT_SYMBOL(of_platform_bus_type);
EXPORT_SYMBOL(of_register_driver);
diff --git a/arch/ppc64/kernel/pSeries_iommu.c b/arch/ppc64/kernel/pSeries_iommu.c
index 2b5e622732f..5914f61a152 100644
--- a/arch/ppc64/kernel/pSeries_iommu.c
+++ b/arch/ppc64/kernel/pSeries_iommu.c
@@ -281,8 +281,10 @@ static void iommu_table_setparms(struct pci_controller *phb,
tbl->it_offset = phb->dma_window_base_cur >> PAGE_SHIFT;
/* Test if we are going over 2GB of DMA space */
- if (phb->dma_window_base_cur + phb->dma_window_size > (1L << 31))
+ if (phb->dma_window_base_cur + phb->dma_window_size > 0x80000000ul) {
+ udbg_printf("PCI_DMA: Unexpected number of IOAs under this PHB.\n");
panic("PCI_DMA: Unexpected number of IOAs under this PHB.\n");
+ }
phb->dma_window_base_cur += phb->dma_window_size;
@@ -326,92 +328,85 @@ static void iommu_table_setparms_lpar(struct pci_controller *phb,
static void iommu_bus_setup_pSeries(struct pci_bus *bus)
{
- struct device_node *dn, *pdn;
- struct pci_dn *pci;
+ struct device_node *dn;
struct iommu_table *tbl;
+ struct device_node *isa_dn, *isa_dn_orig;
+ struct device_node *tmp;
+ struct pci_dn *pci;
+ int children;
DBG("iommu_bus_setup_pSeries, bus %p, bus->self %p\n", bus, bus->self);
- /* For each (root) bus, we carve up the available DMA space in 256MB
- * pieces. Since each piece is used by one (sub) bus/device, that would
- * give a maximum of 7 devices per PHB. In most cases, this is plenty.
- *
- * The exception is on Python PHBs (pre-POWER4). Here we don't have EADS
- * bridges below the PHB to allocate the sectioned tables to, so instead
- * we allocate a 1GB table at the PHB level.
+ dn = pci_bus_to_OF_node(bus);
+ pci = PCI_DN(dn);
+
+ if (bus->self) {
+ /* This is not a root bus, any setup will be done for the
+ * device-side of the bridge in iommu_dev_setup_pSeries().
+ */
+ return;
+ }
+
+ /* Check if the ISA bus on the system is under
+ * this PHB.
*/
+ isa_dn = isa_dn_orig = of_find_node_by_type(NULL, "isa");
- dn = pci_bus_to_OF_node(bus);
- pci = dn->data;
-
- if (!bus->self) {
- /* Root bus */
- if (is_python(dn)) {
- unsigned int *iohole;
-
- DBG("Python root bus %s\n", bus->name);
-
- iohole = (unsigned int *)get_property(dn, "io-hole", 0);
-
- if (iohole) {
- /* On first bus we need to leave room for the
- * ISA address space. Just skip the first 256MB
- * alltogether. This leaves 768MB for the window.
- */
- DBG("PHB has io-hole, reserving 256MB\n");
- pci->phb->dma_window_size = 3 << 28;
- pci->phb->dma_window_base_cur = 1 << 28;
- } else {
- /* 1GB window by default */
- pci->phb->dma_window_size = 1 << 30;
- pci->phb->dma_window_base_cur = 0;
- }
-
- tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
-
- iommu_table_setparms(pci->phb, dn, tbl);
- pci->iommu_table = iommu_init_table(tbl);
- } else {
- /* Do a 128MB table at root. This is used for the IDE
- * controller on some SMP-mode POWER4 machines. It
- * doesn't hurt to allocate it on other machines
- * -- it'll just be unused since new tables are
- * allocated on the EADS level.
- *
- * Allocate at offset 128MB to avoid having to deal
- * with ISA holes; 128MB table for IDE is plenty.
- */
- pci->phb->dma_window_size = 1 << 27;
- pci->phb->dma_window_base_cur = 1 << 27;
-
- tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
-
- iommu_table_setparms(pci->phb, dn, tbl);
- pci->iommu_table = iommu_init_table(tbl);
-
- /* All child buses have 256MB tables */
- pci->phb->dma_window_size = 1 << 28;
- }
- } else {
- pdn = pci_bus_to_OF_node(bus->parent);
+ while (isa_dn && isa_dn != dn)
+ isa_dn = isa_dn->parent;
+
+ if (isa_dn_orig)
+ of_node_put(isa_dn_orig);
- if (!bus->parent->self && !is_python(pdn)) {
- struct iommu_table *tbl;
- /* First child and not python means this is the EADS
- * level. Allocate new table for this slot with 256MB
- * window.
- */
+ /* Count number of direct PCI children of the PHB.
+ * All PCI device nodes have class-code property, so it's
+ * an easy way to find them.
+ */
+ for (children = 0, tmp = dn->child; tmp; tmp = tmp->sibling)
+ if (get_property(tmp, "class-code", NULL))
+ children++;
- tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
+ DBG("Children: %d\n", children);
- iommu_table_setparms(pci->phb, dn, tbl);
+ /* Calculate amount of DMA window per slot. Each window must be
+ * a power of two (due to pci_alloc_consistent requirements).
+ *
+ * Keep 256MB aside for PHBs with ISA.
+ */
- pci->iommu_table = iommu_init_table(tbl);
- } else {
- /* Lower than first child or under python, use parent table */
- pci->iommu_table = PCI_DN(pdn)->iommu_table;
- }
+ if (!isa_dn) {
+ /* No ISA/IDE - just set window size and return */
+ pci->phb->dma_window_size = 0x80000000ul; /* To be divided */
+
+ while (pci->phb->dma_window_size * children > 0x80000000ul)
+ pci->phb->dma_window_size >>= 1;
+ DBG("No ISA/IDE, window size is 0x%lx\n",
+ pci->phb->dma_window_size);
+ pci->phb->dma_window_base_cur = 0;
+
+ return;
}
+
+ /* If we have ISA, then we probably have an IDE
+ * controller too. Allocate a 128MB table but
+ * skip the first 128MB to avoid stepping on ISA
+ * space.
+ */
+ pci->phb->dma_window_size = 0x8000000ul;
+ pci->phb->dma_window_base_cur = 0x8000000ul;
+
+ tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
+
+ iommu_table_setparms(pci->phb, dn, tbl);
+ pci->iommu_table = iommu_init_table(tbl);
+
+ /* Divide the rest (1.75GB) among the children */
+ pci->phb->dma_window_size = 0x80000000ul;
+ while (pci->phb->dma_window_size * children > 0x70000000ul)
+ pci->phb->dma_window_size >>= 1;
+
+ DBG("ISA/IDE, window size is 0x%lx\n", pci->phb->dma_window_size);
+
}
@@ -462,21 +457,36 @@ static void iommu_bus_setup_pSeriesLP(struct pci_bus *bus)
static void iommu_dev_setup_pSeries(struct pci_dev *dev)
{
struct device_node *dn, *mydn;
+ struct iommu_table *tbl;
+
+ DBG("iommu_dev_setup_pSeries, dev %p (%s)\n", dev, pci_name(dev));
- DBG("iommu_dev_setup_pSeries, dev %p (%s)\n", dev, dev->pretty_name);
- /* Now copy the iommu_table ptr from the bus device down to the
- * pci device_node. This means get_iommu_table() won't need to search
- * up the device tree to find it.
- */
mydn = dn = pci_device_to_OF_node(dev);
+ /* If we're the direct child of a root bus, then we need to allocate
+ * an iommu table ourselves. The bus setup code should have setup
+ * the window sizes already.
+ */
+ if (!dev->bus->self) {
+ DBG(" --> first child, no bridge. Allocating iommu table.\n");
+ tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
+ iommu_table_setparms(PCI_DN(dn)->phb, dn, tbl);
+ PCI_DN(mydn)->iommu_table = iommu_init_table(tbl);
+
+ return;
+ }
+
+ /* If this device is further down the bus tree, search upwards until
+ * an already allocated iommu table is found and use that.
+ */
+
while (dn && dn->data && PCI_DN(dn)->iommu_table == NULL)
dn = dn->parent;
if (dn && dn->data) {
PCI_DN(mydn)->iommu_table = PCI_DN(dn)->iommu_table;
} else {
- DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, dev->pretty_name);
+ DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, pci_name(dev));
}
}
@@ -510,7 +520,7 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev)
int *dma_window = NULL;
struct pci_dn *pci;
- DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, dev->pretty_name);
+ DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, pci_name(dev));
/* dev setup for LPAR is a little tricky, since the device tree might
* contain the dma-window properties per-device and not neccesarily
@@ -532,9 +542,8 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev)
* slots on POWER4 machines.
*/
if (dma_window == NULL || pdn->parent == NULL) {
- /* Fall back to regular (non-LPAR) dev setup */
- DBG("No dma window for device, falling back to regular setup\n");
- iommu_dev_setup_pSeries(dev);
+ DBG("No dma window for device, linking to parent\n");
+ PCI_DN(dn)->iommu_table = PCI_DN(pdn)->iommu_table;
return;
} else {
DBG("Found DMA window, allocating table\n");
diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c
index 861138ad092..ff4be1da69d 100644
--- a/arch/ppc64/kernel/pci.c
+++ b/arch/ppc64/kernel/pci.c
@@ -246,11 +246,14 @@ static unsigned int pci_parse_of_flags(u32 addr0)
unsigned int flags = 0;
if (addr0 & 0x02000000) {
- flags |= IORESOURCE_MEM;
+ flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
+ flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
+ flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
if (addr0 & 0x40000000)
- flags |= IORESOURCE_PREFETCH;
+ flags |= IORESOURCE_PREFETCH
+ | PCI_BASE_ADDRESS_MEM_PREFETCH;
} else if (addr0 & 0x01000000)
- flags |= IORESOURCE_IO;
+ flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
return flags;
}
diff --git a/arch/ppc64/kernel/pmac_setup.c b/arch/ppc64/kernel/pmac_setup.c
index 1f5118078f7..bb0c3bfbb7e 100644
--- a/arch/ppc64/kernel/pmac_setup.c
+++ b/arch/ppc64/kernel/pmac_setup.c
@@ -434,15 +434,23 @@ static int pmac_check_legacy_ioport(unsigned int baseport)
static int __init pmac_declare_of_platform_devices(void)
{
- struct device_node *np;
+ struct device_node *np, *npp;
- np = find_devices("u3");
- if (np) {
- for (np = np->child; np != NULL; np = np->sibling)
+ npp = of_find_node_by_name(NULL, "u3");
+ if (npp) {
+ for (np = NULL; (np = of_get_next_child(npp, np)) != NULL;) {
if (strncmp(np->name, "i2c", 3) == 0) {
- of_platform_device_create(np, "u3-i2c");
+ of_platform_device_create(np, "u3-i2c", NULL);
+ of_node_put(np);
break;
}
+ }
+ of_node_put(npp);
+ }
+ npp = of_find_node_by_type(NULL, "smu");
+ if (npp) {
+ of_platform_device_create(npp, "smu", NULL);
+ of_node_put(npp);
}
return 0;
diff --git a/arch/ppc64/kernel/pmac_time.c b/arch/ppc64/kernel/pmac_time.c
index 6c8c99295e7..9d8c97decd3 100644
--- a/arch/ppc64/kernel/pmac_time.c
+++ b/arch/ppc64/kernel/pmac_time.c
@@ -84,7 +84,7 @@ void pmac_get_rtc_time(struct rtc_time *tm)
#ifdef CONFIG_PMAC_SMU
case SYS_CTRLER_SMU:
- smu_get_rtc_time(tm);
+ smu_get_rtc_time(tm, 1);
break;
#endif /* CONFIG_PMAC_SMU */
default:
@@ -128,7 +128,7 @@ int pmac_set_rtc_time(struct rtc_time *tm)
#ifdef CONFIG_PMAC_SMU
case SYS_CTRLER_SMU:
- return smu_set_rtc_time(tm);
+ return smu_set_rtc_time(tm, 1);
#endif /* CONFIG_PMAC_SMU */
default:
return -ENODEV;
diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c
index 9979919cdf9..f252670874a 100644
--- a/arch/ppc64/kernel/prom_init.c
+++ b/arch/ppc64/kernel/prom_init.c
@@ -1711,6 +1711,7 @@ static void __init flatten_device_tree(void)
unsigned long offset = reloc_offset();
unsigned long mem_start, mem_end, room;
struct boot_param_header *hdr;
+ struct prom_t *_prom = PTRRELOC(&prom);
char *namep;
u64 *rsvmap;
@@ -1765,6 +1766,7 @@ static void __init flatten_device_tree(void)
RELOC(dt_struct_end) = PAGE_ALIGN(mem_start);
/* Finish header */
+ hdr->boot_cpuid_phys = _prom->cpu;
hdr->magic = OF_DT_HEADER;
hdr->totalsize = RELOC(dt_struct_end) - RELOC(dt_header_start);
hdr->off_dt_struct = RELOC(dt_struct_start) - RELOC(dt_header_start);
@@ -1854,7 +1856,6 @@ static void __init prom_find_boot_cpu(void)
cpu_pkg = call_prom("instance-to-package", 1, 1, prom_cpu);
- prom_setprop(cpu_pkg, "linux,boot-cpu", NULL, 0);
prom_getprop(cpu_pkg, "reg", &getprop_rval, sizeof(getprop_rval));
_prom->cpu = getprop_rval;
diff --git a/arch/ppc64/kernel/ptrace.c b/arch/ppc64/kernel/ptrace.c
index 85ed3188a91..b1c044ca575 100644
--- a/arch/ppc64/kernel/ptrace.c
+++ b/arch/ppc64/kernel/ptrace.c
@@ -219,6 +219,7 @@ int sys_ptrace(long request, long pid, long addr, long data)
case PTRACE_SET_DEBUGREG:
ret = ptrace_set_debugreg(child, addr, data);
+ break;
case PTRACE_DETACH:
ret = ptrace_detach(child, data);
diff --git a/arch/ppc64/mm/hash_native.c b/arch/ppc64/mm/hash_native.c
index 29b074505d3..874cf96938f 100644
--- a/arch/ppc64/mm/hash_native.c
+++ b/arch/ppc64/mm/hash_native.c
@@ -342,15 +342,14 @@ static void native_flush_hash_range(unsigned long number, int local)
hpte_t *hptep;
unsigned long hpte_v;
struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
-
- /* XXX fix for large ptes */
- unsigned long large = 0;
+ unsigned long large;
local_irq_save(flags);
j = 0;
for (i = 0; i < number; i++) {
va = batch->vaddr[j];
+ large = pte_huge(batch->pte[i]);
if (large)
vpn = va >> HPAGE_SHIFT;
else
diff --git a/arch/ppc64/mm/hugetlbpage.c b/arch/ppc64/mm/hugetlbpage.c
index 338771ec70d..0ea0994ed97 100644
--- a/arch/ppc64/mm/hugetlbpage.c
+++ b/arch/ppc64/mm/hugetlbpage.c
@@ -710,10 +710,13 @@ repeat:
hpte_group = ((~hash & htab_hash_mask) *
HPTES_PER_GROUP) & ~0x7UL;
slot = ppc_md.hpte_insert(hpte_group, va, prpn,
- HPTE_V_LARGE, rflags);
+ HPTE_V_LARGE |
+ HPTE_V_SECONDARY,
+ rflags);
if (slot == -1) {
if (mftb() & 0x1)
- hpte_group = ((hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL;
+ hpte_group = ((hash & htab_hash_mask) *
+ HPTES_PER_GROUP)&~0x7UL;
ppc_md.hpte_remove(hpte_group);
goto repeat;
diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S
index 3e0badb820c..b4834952785 100644
--- a/arch/sparc64/kernel/entry.S
+++ b/arch/sparc64/kernel/entry.S
@@ -42,19 +42,15 @@
* executing (see inherit_locked_prom_mappings() rant).
*/
sparc64_vpte_nucleus:
- /* Load 0xf0000000, which is LOW_OBP_ADDRESS. */
- mov 0xf, %g5
- sllx %g5, 28, %g5
-
- /* Is addr >= LOW_OBP_ADDRESS? */
+ /* Note that kvmap below has verified that the address is
+ * in the range MODULES_VADDR --> VMALLOC_END already. So
+ * here we need only check if it is an OBP address or not.
+ */
+ sethi %hi(LOW_OBP_ADDRESS), %g5
cmp %g4, %g5
blu,pn %xcc, sparc64_vpte_patchme1
mov 0x1, %g5
-
- /* Load 0x100000000, which is HI_OBP_ADDRESS. */
sllx %g5, 32, %g5
-
- /* Is addr < HI_OBP_ADDRESS? */
cmp %g4, %g5
blu,pn %xcc, obp_iaddr_patch
nop
@@ -156,26 +152,29 @@ obp_daddr_patch:
* rather, use information saved during inherit_prom_mappings() using 8k
* pagesize.
*/
+ .align 32
kvmap:
- /* Load 0xf0000000, which is LOW_OBP_ADDRESS. */
- mov 0xf, %g5
- sllx %g5, 28, %g5
+ sethi %hi(MODULES_VADDR), %g5
+ cmp %g4, %g5
+ blu,pn %xcc, longpath
+ mov (VMALLOC_END >> 24), %g5
+ sllx %g5, 24, %g5
+ cmp %g4, %g5
+ bgeu,pn %xcc, longpath
+ nop
- /* Is addr >= LOW_OBP_ADDRESS? */
+kvmap_check_obp:
+ sethi %hi(LOW_OBP_ADDRESS), %g5
cmp %g4, %g5
- blu,pn %xcc, vmalloc_addr
+ blu,pn %xcc, kvmap_vmalloc_addr
mov 0x1, %g5
-
- /* Load 0x100000000, which is HI_OBP_ADDRESS. */
sllx %g5, 32, %g5
-
- /* Is addr < HI_OBP_ADDRESS? */
cmp %g4, %g5
blu,pn %xcc, obp_daddr_patch
nop
-vmalloc_addr:
- /* If we get here, a vmalloc addr accessed, load kernel VPTE. */
+kvmap_vmalloc_addr:
+ /* If we get here, a vmalloc addr was accessed, load kernel VPTE. */
ldxa [%g3 + %g6] ASI_N, %g5
brgez,pn %g5, longpath
nop
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index 23ad839d113..5efbff90d66 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -30,6 +30,7 @@
#include <asm/psrcompat.h>
#include <asm/visasm.h>
#include <asm/spitfire.h>
+#include <asm/page.h>
/* Returning from ptrace is a bit tricky because the syscall return
* low level code assumes any value returned which is negative and
@@ -128,20 +129,20 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
* is mapped to in the user's address space, we can skip the
* D-cache flush.
*/
- if ((uaddr ^ kaddr) & (1UL << 13)) {
+ if ((uaddr ^ (unsigned long) kaddr) & (1UL << 13)) {
unsigned long start = __pa(kaddr);
unsigned long end = start + len;
if (tlb_type == spitfire) {
for (; start < end; start += 32)
- spitfire_put_dcache_tag(va & 0x3fe0, 0x0);
+ spitfire_put_dcache_tag(start & 0x3fe0, 0x0);
} else {
for (; start < end; start += 32)
__asm__ __volatile__(
"stxa %%g0, [%0] %1\n\t"
"membar #Sync"
: /* no outputs */
- : "r" (va),
+ : "r" (start),
"i" (ASI_DCACHE_INVALIDATE));
}
}
diff --git a/arch/sparc64/kernel/una_asm.S b/arch/sparc64/kernel/una_asm.S
index cbb40585253..da48400bcc9 100644
--- a/arch/sparc64/kernel/una_asm.S
+++ b/arch/sparc64/kernel/una_asm.S
@@ -17,7 +17,7 @@ kernel_unaligned_trap_fault:
__do_int_store:
rd %asi, %o4
wr %o3, 0, %asi
- ldx [%o2], %g3
+ mov %o2, %g3
cmp %o1, 2
be,pn %icc, 2f
cmp %o1, 4
diff --git a/arch/sparc64/kernel/unaligned.c b/arch/sparc64/kernel/unaligned.c
index da9739f0d43..42718f6a7d3 100644
--- a/arch/sparc64/kernel/unaligned.c
+++ b/arch/sparc64/kernel/unaligned.c
@@ -184,13 +184,14 @@ extern void do_int_load(unsigned long *dest_reg, int size,
unsigned long *saddr, int is_signed, int asi);
extern void __do_int_store(unsigned long *dst_addr, int size,
- unsigned long *src_val, int asi);
+ unsigned long src_val, int asi);
static inline void do_int_store(int reg_num, int size, unsigned long *dst_addr,
- struct pt_regs *regs, int asi)
+ struct pt_regs *regs, int asi, int orig_asi)
{
unsigned long zero = 0;
- unsigned long *src_val = &zero;
+ unsigned long *src_val_p = &zero;
+ unsigned long src_val;
if (size == 16) {
size = 8;
@@ -198,7 +199,25 @@ static inline void do_int_store(int reg_num, int size, unsigned long *dst_addr,
(unsigned)fetch_reg(reg_num, regs) : 0)) << 32) |
(unsigned)fetch_reg(reg_num + 1, regs);
} else if (reg_num) {
- src_val = fetch_reg_addr(reg_num, regs);
+ src_val_p = fetch_reg_addr(reg_num, regs);
+ }
+ src_val = *src_val_p;
+ if (unlikely(asi != orig_asi)) {
+ switch (size) {
+ case 2:
+ src_val = swab16(src_val);
+ break;
+ case 4:
+ src_val = swab32(src_val);
+ break;
+ case 8:
+ src_val = swab64(src_val);
+ break;
+ case 16:
+ default:
+ BUG();
+ break;
+ };
}
__do_int_store(dst_addr, size, src_val, asi);
}
@@ -276,6 +295,7 @@ asmlinkage void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn, u
kernel_mna_trap_fault();
} else {
unsigned long addr;
+ int orig_asi, asi;
addr = compute_effective_address(regs, insn,
((insn >> 25) & 0x1f));
@@ -285,18 +305,48 @@ asmlinkage void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn, u
regs->tpc, dirstrings[dir], addr, size,
regs->u_regs[UREG_RETPC]);
#endif
+ orig_asi = asi = decode_asi(insn, regs);
+ switch (asi) {
+ case ASI_NL:
+ case ASI_AIUPL:
+ case ASI_AIUSL:
+ case ASI_PL:
+ case ASI_SL:
+ case ASI_PNFL:
+ case ASI_SNFL:
+ asi &= ~0x08;
+ break;
+ };
switch (dir) {
case load:
do_int_load(fetch_reg_addr(((insn>>25)&0x1f), regs),
size, (unsigned long *) addr,
- decode_signedness(insn),
- decode_asi(insn, regs));
+ decode_signedness(insn), asi);
+ if (unlikely(asi != orig_asi)) {
+ unsigned long val_in = *(unsigned long *) addr;
+ switch (size) {
+ case 2:
+ val_in = swab16(val_in);
+ break;
+ case 4:
+ val_in = swab32(val_in);
+ break;
+ case 8:
+ val_in = swab64(val_in);
+ break;
+ case 16:
+ default:
+ BUG();
+ break;
+ };
+ *(unsigned long *) addr = val_in;
+ }
break;
case store:
do_int_store(((insn>>25)&0x1f), size,
(unsigned long *) addr, regs,
- decode_asi(insn, regs));
+ asi, orig_asi);
break;
default:
diff --git a/arch/um/Makefile b/arch/um/Makefile
index ce987266dac..5b5af95721a 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -53,9 +53,13 @@ SYS_DIR := $(ARCH_DIR)/include/sysdep-$(SUBARCH)
# -Dvmap=kernel_vmap affects everything, and prevents anything from
# referencing the libpcap.o symbol so named.
+#
+# Same things for in6addr_loopback - found in libc.
CFLAGS += $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \
- $(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap
+ $(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap \
+ -Din6addr_loopback=kernel_in6addr_loopback
+
AFLAGS += $(ARCH_INCLUDE)
USER_CFLAGS := $(patsubst -I%,,$(CFLAGS))
diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index 14a12d6b3df..16e7dc89f61 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -19,18 +19,44 @@
#include "line.h"
#include "os.h"
-#ifdef CONFIG_NOCONFIG_CHAN
+/* XXX: could well be moved to somewhere else, if needed. */
+static int my_printf(const char * fmt, ...)
+ __attribute__ ((format (printf, 1, 2)));
+
+static int my_printf(const char * fmt, ...)
+{
+ /* Yes, can be called on atomic context.*/
+ char *buf = kmalloc(4096, GFP_ATOMIC);
+ va_list args;
+ int r;
+
+ if (!buf) {
+ /* We print directly fmt.
+ * Yes, yes, yes, feel free to complain. */
+ r = strlen(fmt);
+ } else {
+ va_start(args, fmt);
+ r = vsprintf(buf, fmt, args);
+ va_end(args);
+ fmt = buf;
+ }
-/* The printk's here are wrong because we are complaining that there is no
- * output device, but printk is printing to that output device. The user will
- * never see the error. printf would be better, except it can't run on a
- * kernel stack because it will overflow it.
- * Use printk for now since that will avoid crashing.
- */
+ if (r)
+ r = os_write_file(1, fmt, r);
+ return r;
+
+}
+
+#ifdef CONFIG_NOCONFIG_CHAN
+/* Despite its name, there's no added trailing newline. */
+static int my_puts(const char * buf)
+{
+ return os_write_file(1, buf, strlen(buf));
+}
static void *not_configged_init(char *str, int device, struct chan_opts *opts)
{
- printk(KERN_ERR "Using a channel type which is configured out of "
+ my_puts("Using a channel type which is configured out of "
"UML\n");
return(NULL);
}
@@ -38,27 +64,27 @@ static void *not_configged_init(char *str, int device, struct chan_opts *opts)
static int not_configged_open(int input, int output, int primary, void *data,
char **dev_out)
{
- printk(KERN_ERR "Using a channel type which is configured out of "
+ my_puts("Using a channel type which is configured out of "
"UML\n");
return(-ENODEV);
}
static void not_configged_close(int fd, void *data)
{
- printk(KERN_ERR "Using a channel type which is configured out of "
+ my_puts("Using a channel type which is configured out of "
"UML\n");
}
static int not_configged_read(int fd, char *c_out, void *data)
{
- printk(KERN_ERR "Using a channel type which is configured out of "
+ my_puts("Using a channel type which is configured out of "
"UML\n");
return(-EIO);
}
static int not_configged_write(int fd, const char *buf, int len, void *data)
{
- printk(KERN_ERR "Using a channel type which is configured out of "
+ my_puts("Using a channel type which is configured out of "
"UML\n");
return(-EIO);
}
@@ -66,7 +92,7 @@ static int not_configged_write(int fd, const char *buf, int len, void *data)
static int not_configged_console_write(int fd, const char *buf, int len,
void *data)
{
- printk(KERN_ERR "Using a channel type which is configured out of "
+ my_puts("Using a channel type which is configured out of "
"UML\n");
return(-EIO);
}
@@ -74,14 +100,14 @@ static int not_configged_console_write(int fd, const char *buf, int len,
static int not_configged_window_size(int fd, void *data, unsigned short *rows,
unsigned short *cols)
{
- printk(KERN_ERR "Using a channel type which is configured out of "
+ my_puts("Using a channel type which is configured out of "
"UML\n");
return(-ENODEV);
}
static void not_configged_free(void *data)
{
- printf(KERN_ERR "Using a channel type which is configured out of "
+ my_puts("Using a channel type which is configured out of "
"UML\n");
}
@@ -457,7 +483,7 @@ static struct chan *parse_chan(char *str, int pri, int device,
}
}
if(ops == NULL){
- printk(KERN_ERR "parse_chan couldn't parse \"%s\"\n",
+ my_printf("parse_chan couldn't parse \"%s\"\n",
str);
return(NULL);
}
@@ -465,7 +491,7 @@ static struct chan *parse_chan(char *str, int pri, int device,
data = (*ops->init)(str, device, opts);
if(data == NULL) return(NULL);
- chan = kmalloc(sizeof(*chan), GFP_KERNEL);
+ chan = kmalloc(sizeof(*chan), GFP_ATOMIC);
if(chan == NULL) return(NULL);
*chan = ((struct chan) { .list = LIST_HEAD_INIT(chan->list),
.primary = 1,
diff --git a/arch/um/drivers/mconsole_user.c b/arch/um/drivers/mconsole_user.c
index 310c1f823f2..04383f98f4d 100644
--- a/arch/um/drivers/mconsole_user.c
+++ b/arch/um/drivers/mconsole_user.c
@@ -23,7 +23,7 @@ static struct mconsole_command commands[] = {
{ "reboot", mconsole_reboot, MCONSOLE_PROC },
{ "config", mconsole_config, MCONSOLE_PROC },
{ "remove", mconsole_remove, MCONSOLE_PROC },
- { "sysrq", mconsole_sysrq, MCONSOLE_INTR },
+ { "sysrq", mconsole_sysrq, MCONSOLE_PROC },
{ "help", mconsole_help, MCONSOLE_INTR },
{ "cad", mconsole_cad, MCONSOLE_INTR },
{ "stop", mconsole_stop, MCONSOLE_PROC },
diff --git a/arch/um/include/common-offsets.h b/arch/um/include/common-offsets.h
index 0aa620970ad..782ac3a3baf 100644
--- a/arch/um/include/common-offsets.h
+++ b/arch/um/include/common-offsets.h
@@ -12,4 +12,6 @@ DEFINE_STR(UM_KERN_WARNING, KERN_WARNING);
DEFINE_STR(UM_KERN_NOTICE, KERN_NOTICE);
DEFINE_STR(UM_KERN_INFO, KERN_INFO);
DEFINE_STR(UM_KERN_DEBUG, KERN_DEBUG);
-DEFINE(HOST_ELF_CLASS, ELF_CLASS);
+DEFINE(UM_ELF_CLASS, ELF_CLASS);
+DEFINE(UM_ELFCLASS32, ELFCLASS32);
+DEFINE(UM_ELFCLASS64, ELFCLASS64);
diff --git a/arch/um/include/user.h b/arch/um/include/user.h
index 57ee9e26122..0f865ef4691 100644
--- a/arch/um/include/user.h
+++ b/arch/um/include/user.h
@@ -14,7 +14,9 @@ extern void *um_kmalloc_atomic(int size);
extern void kfree(void *ptr);
extern int in_aton(char *str);
extern int open_gdb_chan(void);
-extern int strlcpy(char *, const char *, int);
+/* These use size_t, however unsigned long is correct on both i386 and x86_64. */
+extern unsigned long strlcpy(char *, const char *, unsigned long);
+extern unsigned long strlcat(char *, const char *, unsigned long);
extern void *um_vmalloc(int size);
extern void vfree(void *ptr);
diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c
index 39cf568ccfa..ea65db679e9 100644
--- a/arch/um/kernel/process_kern.c
+++ b/arch/um/kernel/process_kern.c
@@ -82,7 +82,8 @@ unsigned long alloc_stack(int order, int atomic)
unsigned long page;
int flags = GFP_KERNEL;
- if(atomic) flags |= GFP_ATOMIC;
+ if (atomic)
+ flags = GFP_ATOMIC;
page = __get_free_pages(flags, order);
if(page == 0)
return(0);
diff --git a/arch/um/kernel/sigio_user.c b/arch/um/kernel/sigio_user.c
index e89218958f3..a52751108aa 100644
--- a/arch/um/kernel/sigio_user.c
+++ b/arch/um/kernel/sigio_user.c
@@ -340,7 +340,7 @@ static int setup_initial_poll(int fd)
{
struct pollfd *p;
- p = um_kmalloc(sizeof(struct pollfd));
+ p = um_kmalloc_atomic(sizeof(struct pollfd));
if(p == NULL){
printk("setup_initial_poll : failed to allocate poll\n");
return(-1);
diff --git a/arch/um/kernel/skas/include/uaccess-skas.h b/arch/um/kernel/skas/include/uaccess-skas.h
index 6ee3f3902e6..7da0c2def0e 100644
--- a/arch/um/kernel/skas/include/uaccess-skas.h
+++ b/arch/um/kernel/skas/include/uaccess-skas.h
@@ -18,12 +18,6 @@
((unsigned long) (addr) + (size) <= FIXADDR_USER_END) && \
((unsigned long) (addr) + (size) >= (unsigned long)(addr))))
-static inline int verify_area_skas(int type, const void __user * addr,
- unsigned long size)
-{
- return(access_ok_skas(type, addr, size) ? 0 : -EFAULT);
-}
-
extern int copy_from_user_skas(void *to, const void __user *from, int n);
extern int copy_to_user_skas(void __user *to, const void *from, int n);
extern int strncpy_from_user_skas(char *dst, const char __user *src, int count);
diff --git a/arch/um/kernel/tlb.c b/arch/um/kernel/tlb.c
index 0a562c3c0fd..f5b0636f9ad 100644
--- a/arch/um/kernel/tlb.c
+++ b/arch/um/kernel/tlb.c
@@ -193,12 +193,12 @@ void fix_range_common(struct mm_struct *mm, unsigned long start_addr,
r = pte_read(*npte);
w = pte_write(*npte);
x = pte_exec(*npte);
- if(!pte_dirty(*npte))
- w = 0;
- if(!pte_young(*npte)){
- r = 0;
- w = 0;
- }
+ if (!pte_young(*npte)) {
+ r = 0;
+ w = 0;
+ } else if (!pte_dirty(*npte)) {
+ w = 0;
+ }
if(force || pte_newpage(*npte)){
if(pte_present(*npte))
ret = add_mmap(addr,
diff --git a/arch/um/kernel/trap_kern.c b/arch/um/kernel/trap_kern.c
index 87cc6fd76ce..d297429ac36 100644
--- a/arch/um/kernel/trap_kern.c
+++ b/arch/um/kernel/trap_kern.c
@@ -18,6 +18,7 @@
#include "asm/a.out.h"
#include "asm/current.h"
#include "asm/irq.h"
+#include "sysdep/sigcontext.h"
#include "user_util.h"
#include "kern_util.h"
#include "kern.h"
@@ -39,6 +40,12 @@ int handle_page_fault(unsigned long address, unsigned long ip,
int err = -EFAULT;
*code_out = SEGV_MAPERR;
+
+ /* If the fault was during atomic operation, don't take the fault, just
+ * fail. */
+ if (in_atomic())
+ goto out_nosemaphore;
+
down_read(&mm->mmap_sem);
vma = find_vma(mm, address);
if(!vma)
@@ -89,6 +96,7 @@ survive:
flush_tlb_page(vma, address);
out:
up_read(&mm->mmap_sem);
+out_nosemaphore:
return(err);
/*
@@ -125,7 +133,15 @@ unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc)
}
else if(current->mm == NULL)
panic("Segfault with no mm");
- err = handle_page_fault(address, ip, is_write, is_user, &si.si_code);
+
+ if (SEGV_IS_FIXABLE(&fi))
+ err = handle_page_fault(address, ip, is_write, is_user, &si.si_code);
+ else {
+ err = -EFAULT;
+ /* A thread accessed NULL, we get a fault, but CR2 is invalid.
+ * This code is used in __do_copy_from_user() of TT mode. */
+ address = 0;
+ }
catcher = current->thread.fault_catcher;
if(!err)
diff --git a/arch/um/kernel/tt/include/uaccess-tt.h b/arch/um/kernel/tt/include/uaccess-tt.h
index aa6db384af8..dc2ebfa8c54 100644
--- a/arch/um/kernel/tt/include/uaccess-tt.h
+++ b/arch/um/kernel/tt/include/uaccess-tt.h
@@ -33,12 +33,6 @@ extern unsigned long uml_physmem;
(((unsigned long) (addr) <= ((unsigned long) (addr) + (size))) && \
(under_task_size(addr, size) || is_stack(addr, size))))
-static inline int verify_area_tt(int type, const void __user * addr,
- unsigned long size)
-{
- return(access_ok_tt(type, addr, size) ? 0 : -EFAULT);
-}
-
extern unsigned long get_fault_addr(void);
extern int __do_copy_from_user(void *to, const void *from, int n,
diff --git a/arch/um/kernel/tt/process_kern.c b/arch/um/kernel/tt/process_kern.c
index 0de05a268b2..cfaa373a6e7 100644
--- a/arch/um/kernel/tt/process_kern.c
+++ b/arch/um/kernel/tt/process_kern.c
@@ -23,10 +23,11 @@
#include "mem_user.h"
#include "tlb.h"
#include "mode.h"
+#include "mode_kern.h"
#include "init.h"
#include "tt.h"
-int switch_to_tt(void *prev, void *next, void *last)
+void switch_to_tt(void *prev, void *next)
{
struct task_struct *from, *to, *prev_sched;
unsigned long flags;
diff --git a/arch/um/kernel/tt/uaccess_user.c b/arch/um/kernel/tt/uaccess_user.c
index f01475512ec..8c220f054b6 100644
--- a/arch/um/kernel/tt/uaccess_user.c
+++ b/arch/um/kernel/tt/uaccess_user.c
@@ -22,8 +22,15 @@ int __do_copy_from_user(void *to, const void *from, int n,
__do_copy, &faulted);
TASK_REGS(get_current())->tt = save;
- if(!faulted) return(0);
- else return(n - (fault - (unsigned long) from));
+ if(!faulted)
+ return 0;
+ else if (fault)
+ return n - (fault - (unsigned long) from);
+ else
+ /* In case of a general protection fault, we don't have the
+ * fault address, so NULL is used instead. Pretend we didn't
+ * copy anything. */
+ return n;
}
static void __do_strncpy(void *dst, const void *src, int count)
diff --git a/arch/um/kernel/umid.c b/arch/um/kernel/umid.c
index 186c2888501..0b21d59ba0c 100644
--- a/arch/um/kernel/umid.c
+++ b/arch/um/kernel/umid.c
@@ -31,6 +31,8 @@ static char *uml_dir = UML_DIR;
/* Changed by set_umid */
static int umid_is_random = 1;
static int umid_inited = 0;
+/* Have we created the files? Should we remove them? */
+static int umid_owned = 0;
static int make_umid(int (*printer)(const char *fmt, ...));
@@ -82,20 +84,21 @@ int __init umid_file_name(char *name, char *buf, int len)
extern int tracing_pid;
-static int __init create_pid_file(void)
+static void __init create_pid_file(void)
{
char file[strlen(uml_dir) + UMID_LEN + sizeof("/pid\0")];
char pid[sizeof("nnnnn\0")];
int fd, n;
- if(umid_file_name("pid", file, sizeof(file))) return 0;
+ if(umid_file_name("pid", file, sizeof(file)))
+ return;
fd = os_open_file(file, of_create(of_excl(of_rdwr(OPENFLAGS()))),
0644);
if(fd < 0){
printf("Open of machine pid file \"%s\" failed: %s\n",
file, strerror(-fd));
- return 0;
+ return;
}
sprintf(pid, "%d\n", os_getpid());
@@ -103,7 +106,6 @@ static int __init create_pid_file(void)
if(n != strlen(pid))
printf("Write of pid file failed - err = %d\n", -n);
os_close_file(fd);
- return 0;
}
static int actually_do_remove(char *dir)
@@ -147,7 +149,8 @@ static int actually_do_remove(char *dir)
void remove_umid_dir(void)
{
char dir[strlen(uml_dir) + UMID_LEN + 1];
- if(!umid_inited) return;
+ if (!umid_owned)
+ return;
sprintf(dir, "%s%s", uml_dir, umid);
actually_do_remove(dir);
@@ -155,11 +158,12 @@ void remove_umid_dir(void)
char *get_umid(int only_if_set)
{
- if(only_if_set && umid_is_random) return(NULL);
- return(umid);
+ if(only_if_set && umid_is_random)
+ return NULL;
+ return umid;
}
-int not_dead_yet(char *dir)
+static int not_dead_yet(char *dir)
{
char file[strlen(uml_dir) + UMID_LEN + sizeof("/pid\0")];
char pid[sizeof("nnnnn\0")], *end;
@@ -193,7 +197,8 @@ int not_dead_yet(char *dir)
(p == CHOOSE_MODE(tracing_pid, os_getpid())))
dead = 1;
}
- if(!dead) return(1);
+ if(!dead)
+ return(1);
return(actually_do_remove(dir));
}
@@ -232,16 +237,13 @@ static int __init make_uml_dir(void)
strlcpy(dir, home, sizeof(dir));
uml_dir++;
}
+ strlcat(dir, uml_dir, sizeof(dir));
len = strlen(dir);
- strncat(dir, uml_dir, sizeof(dir) - len);
- len = strlen(dir);
- if((len > 0) && (len < sizeof(dir) - 1) && (dir[len - 1] != '/')){
- dir[len] = '/';
- dir[len + 1] = '\0';
- }
+ if (len > 0 && dir[len - 1] != '/')
+ strlcat(dir, "/", sizeof(dir));
uml_dir = malloc(strlen(dir) + 1);
- if(uml_dir == NULL){
+ if (uml_dir == NULL) {
printf("make_uml_dir : malloc failed, errno = %d\n", errno);
exit(1);
}
@@ -286,6 +288,7 @@ static int __init make_umid(int (*printer)(const char *fmt, ...))
if(errno == EEXIST){
if(not_dead_yet(tmp)){
(*printer)("umid '%s' is in use\n", umid);
+ umid_owned = 0;
return(-1);
}
err = mkdir(tmp, 0777);
@@ -296,7 +299,8 @@ static int __init make_umid(int (*printer)(const char *fmt, ...))
return(-1);
}
- return(0);
+ umid_owned = 1;
+ return 0;
}
__uml_setup("uml_dir=", set_uml_dir,
@@ -309,7 +313,8 @@ static int __init make_umid_setup(void)
/* one function with the ordering we need ... */
make_uml_dir();
make_umid(printf);
- return create_pid_file();
+ create_pid_file();
+ return 0;
}
__uml_postsetup(make_umid_setup);
diff --git a/arch/um/kernel/user_util.c b/arch/um/kernel/user_util.c
index a25f3ea11fd..41d17c71511 100644
--- a/arch/um/kernel/user_util.c
+++ b/arch/um/kernel/user_util.c
@@ -128,6 +128,12 @@ void setup_machinename(char *machine_out)
struct utsname host;
uname(&host);
+#if defined(UML_CONFIG_UML_X86) && !defined(UML_CONFIG_64BIT)
+ if (!strcmp(host.machine, "x86_64")) {
+ strcpy(machine_out, "i686");
+ return;
+ }
+#endif
strcpy(machine_out, host.machine);
}
diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c
index 298d5632128..f6e64026f99 100644
--- a/arch/um/os-Linux/aio.c
+++ b/arch/um/os-Linux/aio.c
@@ -144,6 +144,7 @@ static int aio_thread(void *arg)
"errno = %d\n", errno);
}
else {
+ /* This is safe as we've just a pointer here. */
aio = (struct aio_context *) (long) event.data;
if(update_aio(aio, event.res)){
do_aio(ctx, aio);
diff --git a/arch/um/os-Linux/elf_aux.c b/arch/um/os-Linux/elf_aux.c
index e770cb02957..ab33cb3c74e 100644
--- a/arch/um/os-Linux/elf_aux.c
+++ b/arch/um/os-Linux/elf_aux.c
@@ -14,7 +14,8 @@
#include "mem_user.h"
#include <kernel-offsets.h>
-#if HOST_ELF_CLASS == ELFCLASS32
+/* Use the one from the kernel - the host may miss it, if having old headers. */
+#if UM_ELF_CLASS == UM_ELFCLASS32
typedef Elf32_auxv_t elf_auxv_t;
#else
typedef Elf64_auxv_t elf_auxv_t;
diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c
index d32413e4b4c..d9c52387c4a 100644
--- a/arch/um/os-Linux/process.c
+++ b/arch/um/os-Linux/process.c
@@ -3,6 +3,7 @@
* Licensed under the GPL
*/
+#include <unistd.h>
#include <stdio.h>
#include <errno.h>
#include <signal.h>
diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c
index bd3c34aa52e..36b5c2c1328 100644
--- a/arch/um/sys-i386/ldt.c
+++ b/arch/um/sys-i386/ldt.c
@@ -83,6 +83,7 @@ int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount)
goto out;
}
p = buf;
+ break;
default:
res = -ENOSYS;
goto out;
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 0969d570f3b..21afa69a086 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -308,7 +308,7 @@ config HPET_TIMER
present. The HPET provides a stable time base on SMP
systems, unlike the TSC, but it is more expensive to access,
as it is off-chip. You can find the HPET spec at
- <http://www.intel.com/labs/platcomp/hpet/hpetspec.htm>.
+ <http://www.intel.com/hardwaredesign/hpetspec.htm>.
config X86_PM_TIMER
bool "PM timer"
diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c
index 09887c96e9a..de19501aa80 100644
--- a/arch/xtensa/kernel/pci.c
+++ b/arch/xtensa/kernel/pci.c
@@ -402,8 +402,8 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
__pci_mmap_set_flags(dev, vma, mmap_state);
__pci_mmap_set_pgprot(dev, vma, mmap_state, write_combine);
- ret = io_remap_page_range(vma, vma->vm_start, vma->vm_pgoff<<PAGE_SHIFT,
- vma->vm_end - vma->vm_start, vma->vm_page_prot);
+ ret = io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+ vma->vm_end - vma->vm_start,vma->vm_page_prot);
return ret;
}
diff --git a/arch/xtensa/kernel/platform.c b/arch/xtensa/kernel/platform.c
index cf136278444..03674daabc6 100644
--- a/arch/xtensa/kernel/platform.c
+++ b/arch/xtensa/kernel/platform.c
@@ -39,7 +39,7 @@ _F(int, pcibios_fixup, (void), { return 0; });
_F(int, get_rtc_time, (time_t* t), { return 0; });
_F(int, set_rtc_time, (time_t t), { return 0; });
-#if CONFIG_XTENSA_CALIBRATE_CCOUNT
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
_F(void, calibrate_ccount, (void),
{
printk ("ERROR: Cannot calibrate cpu frequency! Assuming 100MHz.\n");
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
index c83bb0d4178..08ef6d82ee5 100644
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -457,7 +457,7 @@ int
dump_task_fpu(struct pt_regs *regs, struct task_struct *task, elf_fpregset_t *r)
{
/* see asm/coprocessor.h for this magic number 16 */
-#if TOTAL_CPEXTRA_SIZE > 16
+#if XTENSA_CP_EXTRA_SIZE > 16
do_save_fpregs (r, regs, task);
/* For now, bit 16 means some extra state may be present: */
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 1f5bf5d624e..513ed8d6776 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -304,7 +304,7 @@ void __init setup_arch(char **cmdline_p)
# endif
#endif
-#if CONFIG_PCI
+#ifdef CONFIG_PCI
platform_pcibios_init();
#endif
}
diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c
index dc42cede939..e252b61e45a 100644
--- a/arch/xtensa/kernel/signal.c
+++ b/arch/xtensa/kernel/signal.c
@@ -182,7 +182,7 @@ restore_cpextra (struct _cpstate *buf)
struct task_struct *tsk = current;
release_all_cp(tsk);
- return __copy_from_user(tsk->thread.cpextra, buf, TOTAL_CPEXTRA_SIZE);
+ return __copy_from_user(tsk->thread.cpextra, buf, XTENSA_CP_EXTRA_SIZE);
#endif
return 0;
}
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index 1ac7d5ce745..8e423d1335c 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -68,7 +68,7 @@ void __init time_init(void)
* speed for the CALIBRATE.
*/
-#if CONFIG_XTENSA_CALIBRATE_CCOUNT
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
printk("Calibrating CPU frequency ");
platform_calibrate_ccount();
printk("%d.%02d MHz\n", (int)ccount_per_jiffy/(1000000/HZ),
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index 56aace84aae..5a91d6c9e66 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -239,7 +239,7 @@ void __init mem_init(void)
high_memory = (void *) __va(max_mapnr << PAGE_SHIFT);
highmemsize = 0;
-#if CONFIG_HIGHMEM
+#ifdef CONFIG_HIGHMEM
#error HIGHGMEM not implemented in init.c
#endif