aboutsummaryrefslogtreecommitdiff
path: root/drivers/block
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block')
-rw-r--r--drivers/block/cciss.c14
-rw-r--r--drivers/block/cciss_scsi.c85
2 files changed, 90 insertions, 9 deletions
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 8d0f8932fee..cb43fb3af15 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1974,6 +1974,13 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_
c->Request.CDB[0] = BMIC_WRITE;
c->Request.CDB[6] = BMIC_CACHE_FLUSH;
break;
+ case TEST_UNIT_READY:
+ memcpy(c->Header. LUN.LunAddrBytes, scsi3addr, 8);
+ c->Request.CDBLen = 6;
+ c->Request.Type.Attribute = ATTR_SIMPLE;
+ c->Request.Type.Direction = XFER_NONE;
+ c->Request.Timeout = 0;
+ break;
default:
printk(KERN_WARNING
"cciss%d: Unknown Command 0x%c\n", ctlr, cmd);
@@ -1992,13 +1999,14 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_
memcpy(&c->Request.CDB[4], buff, 8);
break;
case 1: /* RESET message */
- c->Request.CDBLen = 12;
+ memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8);
+ c->Request.CDBLen = 16;
c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_WRITE;
+ c->Request.Type.Direction = XFER_NONE;
c->Request.Timeout = 0;
memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
c->Request.CDB[0] = cmd; /* reset */
- c->Request.CDB[1] = 0x04; /* reset a LUN */
+ c->Request.CDB[1] = 0x03; /* reset a target */
break;
case 3: /* No-Op message */
c->Request.CDBLen = 1;
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index a3fd87b4144..8575c48c891 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -58,6 +58,18 @@ static int sendcmd(
unsigned char *scsi3addr,
int cmd_type);
+static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff,
+ size_t size,
+ unsigned int use_unit_num, /* 0: address the controller,
+ 1: address logical volume log_unit,
+ 2: periph device address is scsi3addr */
+ unsigned int log_unit, __u8 page_code, unsigned char *scsi3addr,
+ int cmd_type);
+
+static int sendcmd_core(ctlr_info_t *h, CommandList_struct *c);
+
+static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool);
+static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool);
static int cciss_scsi_proc_info(
struct Scsi_Host *sh,
@@ -1575,6 +1587,68 @@ cciss_seq_tape_report(struct seq_file *seq, int ctlr)
CPQ_TAPE_UNLOCK(ctlr, flags);
}
+static int wait_for_device_to_become_ready(ctlr_info_t *h,
+ unsigned char lunaddr[])
+{
+ int rc;
+ int count = 0;
+ int waittime = HZ;
+ CommandList_struct *c;
+
+ c = cmd_alloc(h, 1);
+ if (!c) {
+ printk(KERN_WARNING "cciss%d: out of memory in "
+ "wait_for_device_to_become_ready.\n", h->ctlr);
+ return IO_ERROR;
+ }
+
+ /* Send test unit ready until device ready, or give up. */
+ while (count < 20) {
+
+ /* Wait for a bit. do this first, because if we send
+ * the TUR right away, the reset will just abort it.
+ */
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(waittime);
+ count++;
+
+ /* Increase wait time with each try, up to a point. */
+ if (waittime < (HZ * 30))
+ waittime = waittime * 2;
+
+ /* Send the Test Unit Ready */
+ rc = fill_cmd(c, TEST_UNIT_READY, h->ctlr, NULL, 0, 0, 0, 0,
+ lunaddr, TYPE_CMD);
+ if (rc == 0) {
+ rc = sendcmd_core(h, c);
+ /* sendcmd turned off interrupts, turn 'em back on. */
+ h->access.set_intr_mask(h, CCISS_INTR_ON);
+ }
+
+ if (rc == 0 && c->err_info->CommandStatus == CMD_SUCCESS)
+ break;
+
+ if (rc == 0 &&
+ c->err_info->CommandStatus == CMD_TARGET_STATUS &&
+ c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION &&
+ (c->err_info->SenseInfo[2] == NO_SENSE ||
+ c->err_info->SenseInfo[2] == UNIT_ATTENTION))
+ break;
+
+ printk(KERN_WARNING "cciss%d: Waiting %d secs "
+ "for device to become ready.\n",
+ h->ctlr, waittime / HZ);
+ rc = 1; /* device not ready. */
+ }
+
+ if (rc)
+ printk("cciss%d: giving up on device.\n", h->ctlr);
+ else
+ printk(KERN_WARNING "cciss%d: device is ready.\n", h->ctlr);
+
+ cmd_free(h, c, 1);
+ return rc;
+}
/* Need at least one of these error handlers to keep ../scsi/hosts.c from
* complaining. Doing a host- or bus-reset can't do anything good here.
@@ -1591,6 +1665,7 @@ static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
{
int rc;
CommandList_struct *cmd_in_trouble;
+ unsigned char lunaddr[8];
ctlr_info_t **c;
int ctlr;
@@ -1600,19 +1675,17 @@ static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
return FAILED;
ctlr = (*c)->ctlr;
printk(KERN_WARNING "cciss%d: resetting tape drive or medium changer.\n", ctlr);
-
/* find the command that's giving us trouble */
cmd_in_trouble = (CommandList_struct *) scsicmd->host_scribble;
- if (cmd_in_trouble == NULL) { /* paranoia */
+ if (cmd_in_trouble == NULL) /* paranoia */
return FAILED;
- }
+ memcpy(lunaddr, &cmd_in_trouble->Header.LUN.LunAddrBytes[0], 8);
/* send a reset to the SCSI LUN which the command was sent to */
- rc = sendcmd(CCISS_RESET_MSG, ctlr, NULL, 0, 2, 0, 0,
- (unsigned char *) &cmd_in_trouble->Header.LUN.LunAddrBytes[0],
+ rc = sendcmd(CCISS_RESET_MSG, ctlr, NULL, 0, 2, 0, 0, lunaddr,
TYPE_MSG);
/* sendcmd turned off interrupts on the board, turn 'em back on. */
(*c)->access.set_intr_mask(*c, CCISS_INTR_ON);
- if (rc == 0)
+ if (rc == 0 && wait_for_device_to_become_ready(*c, lunaddr) == 0)
return SUCCESS;
printk(KERN_WARNING "cciss%d: resetting device failed.\n", ctlr);
return FAILED;